As Chronic Non-Communicable Diseases (CNCD) increase, preventive approaches become more crucial. In this review, Calorie Restriction (CR) effects on human beings were evaluated, comparing benefits and risks of different CR diets: classic CR vs ketosis-inducing diets, including Intermittent Fasting (IF), Classic Ketogenic Diet (CKD), Fasting Mimicking Diet (FMD), Very-Low-Calorie Ketogenic Diet (VLCKD) and Spanish Ketogenic Mediterranean Diet (SKMD). Special emphasis on Insulin Resistance (IR) was placed, as it mediates Metabolic Syndrome (MS), a risk factor for CNCD, and predicts MS diagnosis. CR is the most robust intervention known to increase lifespan and health span, with high evidence and known biochemical mechanisms. CR improves cardiometabolic risk parameters, boosts exercise insulin sensitivity response, and there may be benefits of implementing moderate CR on healthy young and middle-aged individuals. However, there is insufficient evidence to support long-term CR. CKD is effective for weight and MS management, and may have additional benefits such as prevention of muscle loss and appetite control. SKMD has extreme significance benefits for all the metabolic parameters studied. Studies show inconsistent benefits of IF compared to classic CR. More studies are required to study biochemical parameters, reinforce evidence, identify risks, and seek effective and safe nutritional CR approaches.

The effective treatment of human immunodeficiency virus (HIV), also known as acquired immunodeficiency syndrome (AIDS), has transformed a highly lethal disease into a chronic and manageable condition. However, better methods need to be developed for eliminating the virus from reservoirs, enhancing patient access and adherence to therapy, and improving treatment in the long term to reduce adverse effects. From the perspective of drug discovery, one promising strategy is the development of anti-HIV prodrugs. This approach aims to enhance the efficacy and safety of treatment, promoting the development of more appropriate and convenient systems for patients. In this review, we discussed the use of the prodrug approach for HIV antiviral agents and emphasized nucleoside reverse transcriptase inhibitors. We comprehensively described various strategies that are used to enhance factors such as water solubility, bioavailability, pharmacokinetic parameters, permeability across biological membranes, chemical stability, drug delivery to specific sites/organs, and tolerability. These strategies might help researchers conduct better studies in this field. We also reported successful examples from the primary therapeutic classes while discussing the advantages and limitations. In this review, we highlighted the key trends in the application of the prodrug approach for treating HIV/AIDS..

60\% of the global population is expected to be in cities by 2050. At the same time the climate is changing at an accelerated rate. In this short paper we discuss the conflation of these two phenomena and how it may change the cities of the future. We formulate this as an optimization problem that could help answer important questions such as where are they likely to be located? How are they to be powered? What would be their demand for mobility and how might this be met? How over or under ground might these cities be? This paper first looks at a historical paradigm of cities in the absence of the climate crisis and then proposes the new paradigm to look at cities of the future faced by the challenge of the climate change crisis.

Background: There have been reports of numerous risk factors for Alzheimer's disease. Although widely investigated, some points during the evolution of the disease have been obscure. One of them is a great frustration with therapeutic expectations. Why has there been an increase in suicidal behavior in treatments with anti-beta-amyloid drugs? Interpersonal stress is one of the factors that may be connecting Alzheimer's disease to suicide. Method: To observe possible associations between Alzheimer's disease and suicide, two validated questionnaires were selected. We recruited 20 elderly patients over 65 years old to observe the feasibility of further research using these instruments. The study was considered viable if all participants showed no difficulty in understanding the questions and completed both questionnaires in less than 30 minutes with a tendency to homogeneity. A description of the statistical data obtained was made. Results: All participants adequately understood the questions and completed the questionnaires in less than 30 minutes. In 10% of the sample, suicide attempts occurred throughout their lives. The average age of respondents was 75 years old. The QoSL Pareto diagram demonstrated a large concentration. The data demonstrated homogeneity. Conclusions: The application of the questionnaires in a sample suitable for carrying out analytical statistics was demonstrated. We have two great tools to try to understand the possible association between Alzheimer's disease and suicide.

Amid the covid-19 pandemic, other diseases, including viruses, are still acting to the detriment of their seasonality and risk factors for contagion. For this reason, it is interesting to know the degree of impact of other viruses, mainly respiratory, in which they have similar symptoms, in diagnoses for contamination by the new coronavirus based on epidemiological surveys, via epidemiological weeks, in Brazil. To what extent there may be a hypothesis of confusion of contaminated data, harming the health system, with regard to the need for intensive care units and control of viruses, and negatively or positively implying in the control or uncontrolling of viruses in general.

Arboviruses are infections caused by arboviruses that may be either symptomatic or asymptomatic, according to individuals' resistance and immune response, which dietary patterns can influence. Thus, this study aimed to investigate the possible association between the occurrence of clinical manifestations of arboviruses and the dietary pattern of the population studied. The study was conducted in a rural population in the metropolitan area of Belém, Pará State, Brazil. The sampling consisted of 95 individuals during a febrile outbreak. Two investigations were conducted: clinical-epidemiological-dietary and laboratory investigation based on blood samples taken for arbovirus analysis. Out of the 95 individuals studied, more than half (57.89%) showed clinical manifestations. Following the laboratory serology (HI and IgM ELISA) analyses, viral isolation in C6/36 cells, and viral genome detection (RT-qPCR), the final diagnosis of the cases was 47.37% Oropouche Fever, 2.11% Oropouche Fever and Chikungunya Fever, and 1.05% Mayaro Fever. Regarding dietary pattern, as for the comparison analyses, statistical significance was observed between dietary pattern and classification regarding the presence of symptoms (p<0.05); after the correspondence analysis, symptomatic cases were more associated with a bad dietary pattern, while asymptomatic cases were more associated with a good dietary pattern.

A study to produce cellulose nanofibrils (CNF) from Kraft cellulose pulp, an optimal enzyme mixture, was defined using a centroid simplex mixture design. The enzyme blend contains 69% endoglucanase and 31% exoglucanase. The central composite rotational design (CCRD) optimized the CNF production process by achieving a higher crystallinity index. It thus corresponded to a solid loading of 15 g/L and an enzyme loading of 0.974. Using the Segal formula, the crystallinity index (CrI) of CNF was determined by X-ray diffraction to be 80.87%. The average diameter of nanocellulose fibers measured by scanning electron microscopy between 550 - 600 nm for the CNF prepared by enzymatic hydrolysis and between 250 - 300 nm for the CNF produced by enzymatic hydrolysis with the optimal enzyme mixture followed by ultrasonic dispersion. Finally, synergistic interactions between the enzymes involved in nanocellulose production were demonstrated, with Colby factor values greater than one.

The multidrug-resistant fungal pathogens belonging to the Candida haemulonii complex and the phylogenetically related species Candida auris are well-known for causing infections that are difficult to treat due to their multidrug-resistance profile. C. auris is even more worrisome due to its ability to cause outbreaks in healthcare settings. These emerging yeasts produce a wide range of virulence factors that facilitate the development of the infectious process. In recent years, the aggregative phenotype has been receiving attention, as it is mainly associated with defects in cellular division and its possible involvement in helping the fungus to escape from host immune responses. In this study, we initially investigated the aggregation ability of 18 clinical isolates belonging to the C. haemulonii species complex and C. auris. Subsequently, we evaluated the effects of physicochemical factors on the fungal aggregation competence. The results demonstrated that cell aggregation was a typically time-dependent event, in which almost all studied fungal isolates exhibited high aggregation after 2 h of incubation at 37°C. The aggregation was not impacted by pH, temperature, -mercaptoethanol (a protein-denaturing agent) and EDTA (a chelator agent). Conversely, proteinase K, trypsin and sodium dodecyl sulfate significantly diminished the aggregation. Collectively, our results demonstrated that the aggregation ability in these opportunistic yeast pathogens is time-dependent, and surface proteins and hydrophobic interactions seem to mediate cell aggregation, since the presence of proteases and anionic detergent affected the aggregation ability. However, further studies are necessary to better elucidate this phenomenon.

During normal ageing, physical changes take place, namely in terms of the biomechanical, musculoskeletal, and psychomotor systems, that reduce strength, flexibility, motor coordination, balance, and precision of movements. This article analyses the motion behaviour of a sample of 49 senior and pre-senior subjects during the process of entry to (ingress) and exit from (egress) new car models not experienced before, obtained over five days at the Geneva International Motor Show. The methodological process is based on visual studies using photography and video to analyse motion behaviour. This investigation identifies five entry movement strategies and three exit movement strategies in three types of vehicle groups. The movements adopted in the egress of the vehicle were more complex and difficult, in general, than those observed for ingress, requiring greater flexibility, agility/dexterity, and physical strength of subjects, involving more contact or support with vehicle parts. The main factor that influences movement strategies is essentially related to subjects’ levels of physical capacity and previous experiences. In conclusion, there are no significant changes in the subjects’ somatic movement strategies based on vehicle types.

Biomechanics is a branch of biophysics that deals with mechanics applied to biology. The biomechanics of the cornea plays a significant role in managing patients with glaucoma. While evidence suggests a higher risk of glaucoma in patients with thin and stiffer corneas, it also affects the measurement of intraocular pressure (IOP). We reviewed the pertinent literature to help the understanding of corneal biomechanics and how it can help optimize clinical and surgical treatments and a better approach to diagnosing and managing patients with glaucoma.

Background: Research articles are essential for describing new ideas, techniques, and procedures and consolidating concepts. It creates an opportunity to expose studies and publicly assimilate published knowledge. Therefore, one of them is the most used and accepted index to verify the author’s scientific impact is the H-index or Hirsch index. It provides a robust single metric that combines quality and quantity. Therefore, it presents disadvantages, (1) researchers with shorter scientific carriers may have fewer articles and citations than those with longer scientific life; (2) it allows scientists to receive citations even if no new papers are published; (3) it is only useful for comparing the better scientists in a field; (4) this indicator can never decrease; (5) it is only weakly sensitive to the number of citations received; (6) the major and minor (or no) contributor in the research gained equal h-index. Then, the H-index ignores the total of citations and the time of a researcher's experience (“scientific age” [sa]). Objective: Thus, the goal of this study was to present a new index system (GFsa index ©) based on the two variables completely forgotten (total of citations and “scientific age”), introducing a new terminology “scientific age”, to evaluate the best-ranked researchers in Dentistry. Methods: The AD Scientific Index was used, and all researchers included in this study were cited in the AD Scientific Index (2024) in the Dentistry field and had the Google Scholar page accessible for a consultation to manually obtain the total of citations and calculate the “scientific age”. The information was retrieved by two authors (G.V.O.F. and J.C.H.F.), who assessed the data twice to avoid errors or mistakes. For inclusion: a minimum H-index value of 30; for exclusion: (i) the author did not have a Google Scholar page; (ii) duplicated author; or (iii) presented any suspicious activities about manipulation of articles. Then, a dataset of all researchers who were reported in Dentistry was prepared (name, H-index, i10 index, and publications). The formula developed and applied was GFsa=(total number of citations)/(“scientific age)². The Pearson correlation statistically evaluated the data obtained; the confidence interval was 95%. Results: A total of 9,093 researchers in Dentistry were recorded, of whom 1,020 were included. Then, we collected all 1,020 researchers' Google Scholar data (publications, citations, and indexes), and each researcher's total citations and “scientific age” were registered and calculated. The mean “scientific age” registered was 34.18 ± 13.34 (standard error of mean = 0.4181). With this information and data collected, GFsa index © was calculated, presenting a minimum value of 0.2186 and a maximum of 154.8 (mean = 10.33 ± 11.82; standard error of mean = 0.3706). Then, the data was organized and sorted following the ranking obtained in the GFsa index ©. The Pearson correlation showed that the H-index had a weakly positive association with the researcher’s “scientific age”; this fact means that the H-index will increase according to the “scientific age” increase. Otherwise, a moderately negative correlation between GFsa and “scientific age” was demonstrated, whereby a higher GFsa © had a lower “Scientific age”. This assessment shows that the variables introduced were fairly used. Moreover, a positive correlation was observed between both indexes (H-index and GFsa). Conclusion: It is possible to conclude that the new variable reported (“Scientific age”) and using the total citations brought a fairer and more feasible evaluation among the researchers. Thus, we are launching the new GFsa index © and the new information named “Scientific age” for the first time in the literature. The future perspective of the GFsa © application will be (1) the evaluation of the 9,093 researchers in Dentistry (total initially registered), including more authors/researchers in the Dentistry field, (2) expanding the exposition of this new index for other areas of the knowledge, and (3) provide free access of all data through the website (http://gfindex.us.to).

The literature, aimed at understanding the income-price elasticity of air passenger demand, bases its analysis on airport movement. The diversity of studies regarding the casualty between air transportation and economic growth are examples. Some studies covering this link, estimate the income-price relationship with the demand considering international traffic. Considering a domestic setting, where this traffic is significant in Brazil, studies related to remote regions are scarce, and the existing ones focus on governmental policies and subsidies. In addition, empirical studies on the theme consenter themselves in developed regions, such as Europe, North America, and Australia. For Brazil, where we find the Amazon region, there are no empirical researches. This paper analyses the price-income elasticity of the demand regarding domestic passengers in air links from remote cities of the Brazilian Amazon. This study uses panel data regression analysis method on a database of domestic scheduled flights of Brazil´s National Civil Aviation Agency. The results show that air passengers involving remote region flights present a lower sensitiveness regarding local income and airline´s price variations than those in flights among capitals. The higher difference is in income-elasticity of the remote city of origin, which is lower than that of the air traffic among capitals.

Chronic noncommunicable diseases (CNCDs) have been a major public health concern worldwide, especially diabetes, cardiovascular disease, chronic obstructive pulmonary disease, hypertension, in addition to obesity, which is even more worrying when the subject involves the covid-19 pandemic, because such incidences correlate with the need for intensive care units, including the possibility of death of the patient. Therefore, for countries with the highest numbers of critical cases, it is important to assess the incidence of these diseases to guide the public that most needs guidance on public policies for social isolation.

Advanced Nano structural hard coatings are thin materials films that range in thickness from a few nanometers to a few micrometers and are applied to different surfaces to increase their hardness and wear resistance. Physical vapor deposition (PVD) or chemical vapor deposition (CVD) methods are frequently used to deposit these coatings. These coating’s distinctive characteristics result from their microstructure, which is made up of material columns or grains with a diameter of only a few nanometers. Increased hardness, higher wear resistance, and improved tribological properties result from these short dimensions. In applications with significant wear and/or high contact pressures, such as cutting tools, bearings, and engine parts, the usage of sophisticated Nano structural hard coatings is crucial. Advanced Nano structural hard coatings include, 1. Amorphous carbon coatings with high hardness, low friction, and exceptional wear resistance are known as diamond-like carbon (DLC) coatings. DLC coatings are frequently used in a variety of industries, including the automotive, aerospace, and biomedical ones. 2. Coatings made of titanium nitride (TiN): These metallic coatings have high hardness and wear resistance. Cutting tool, machining, and aerospace industries frequently use TiN coatings. 3. Chromium nitride (CrN) coatings: These coatings have great corrosion resistance, good wear resistance, and high hardness. Cutting tools, gears, and bearings are just a few of the objects that use CrN coatings. 4. Tungsten carbide (WC) coatings: These coatings, which have a high degree of hardness and wear resistance, are frequently employed in cutting tools and other applications that require wear resistance. Advanced Nano structural hard coatings provide many advantages over conventional coatings, including better hardness, increased wear resistance, and improved tribological qualities. The automotive, aerospace, and biomedical industries are just a few that could use these coatings. In this paper the author will explain about the design synthesis and applications of advanced Nano structural hard coating in aerospace and automotive applications.

Purpose: The goal of this article was to introduce a new technique for root coverage (RC), the Mixed-Thickness Tunnel access (MiTT), approaching a full-split design, showing the results obtained in a case series and demonstrating it step-by-step. Methods: Healthy individuals, non-smokers, and non-diabetics, who were diagnosed with gingival recession (GR) type 1 or 2 (RT1 or RT2). After all necessary evaluations, prophylaxis was performed 14 days before the surgical procedure. Then, after the basics clinical conduct and anesthesia, one or two vertical incision(s) on the mucosa (around 1-2 mm apical to the MGJ), lateral to the papilla base, were done. Initial detachment of the mucosa from the muscles (split design); it was permitted (but not mandatory) to do intrasulcular incisions; from the MGJ to coronal, subperiosteal access was done to raise the full-thickness tunnel. It must communicate up to the gingival sulcus area and the papilla’s base, keeping the papilla’s tip intact. A connective tissue graft was harvested, which was inserted through the linear incision or intrasulcularly. Interrupted sutures were done and may be used as adjunctive material. Results: Nine healthy individuals (7 females and 2 males) aged 19 and 43 years were enrolled. They were treated following the MiTT steps. There were four cases with a single GR, 2 patients with 2 teeth involved, and three with 3 or 4 GR. Seven cases were RT1 and two RT2. All RT1 cases achieved 100% RC, while the mean RC obtained for RT2 was around 80%. Conclusion: MiTT can be considered a more straightforward approach for minimally invasive surgical technique, which is a feasible option to treat RC with a high success rate, predictability, and esthetic preservation. There is a technical sensitivity to performing the full-split design procedure.

Curcumin [1,7-bis(4-hydroxy-3-methoxyphenyl)-1,6-heptadien-3,5-dione], a component of Curcuma longa L. rhizomes, displays various biological and pharmacological activities. However, it is poorly bioavailable and unstable in physiological pH, which has led more stable and effective curcumin analogs (e.g., monoketone curcuminoids, or MKCs) to be synthesized, and their biological activities to be described. In this review, we cover papers published between 2019 and 2023 on the antimicrobial, anticancer, antioxidant, and antiparasitic actions as well as other less common MKC biological and pharmacological activities. We also address the Claisen-Schmidt condensation as a standard procedure to synthesize MKCs.

The demand for dietary supplements containing collagen has been growing for years. The speciality and uniqueness of the dietary supplement (DS) examined in our study is the presence of L-arginine and hyaluronic acid alongside collagen and vitamin C. The individual mechanisms of action and physiological role of these compounds are understood, but they have not yet been tested in the combination and amounts of the dietary supplement used in this study. In this study, we investigated the effectiveness of the DS in elderly patients with musculoskeletal complaints. Somatometric, body composition, physiotherapy and laboratory tests were performed at the beginning and at the end of the study. The two-month study involved 30 people, randomly divided into two groups: a control group (CG) and an experimental group (EG). All subjects consumed 25 ml DS per day and EG members also participated in physiotherapy 3 times a week. Alongside the DS, blood lipid levels changed: LDL decreased, HDL increased, LDL/HDL ratio significantly decreased in both groups. For EG, the results improved more markedly. In 3 items of the body composition test, there was a significant improvement in both groups, which was attributed to the use of the dietary supplement. For the EG, there were significant changes in 5 additional test items, which we attribute to the addition of regular physical activity. Knee and hip joint range of motion (ROM) showed significant improvements in the study group, while in the CG the DS can cause significant improvements in joint range of motion in a passive condition as well.

Nowadays the dynamism induced by the constant change of strategic decisions on the markets produces an extra difficulty in the management of an organization. The strategic decisions made by managers can become obsolete in a short period of time. One of the major difficulties in managing a commercial organization is to predict, with some precision degree, the impact some strategic decisions have on the financial results. Business Intelligence (BI) is an area widely used to help managers to make strategic decisions. But the methods used, behind the scenes, to achieve the conclusions are kept secret by BI company-based services. Modelling the environment can be a good option to study the impact of an action, provided by a strategic decision, in a real environment. A good model should give an approximate result of an action applied to a previous state of the environment. Artificial Neural Networks (ANNs) are proven to be excellent in modeling environments with some level of data noise. The same strategic action can have different results in different organizations. A tool that allows an evaluation of a strategic action applied to an environment should have a major importance in the management scope. Modeling the environment should save time and money for the organization to improve the performance of the strategic plan. If one evaluates the state of the environment after a strategic action being applied, it can be possible to mitigate the risk of failure of the strategic plan. As we will be able to verify, it is possible to use ANNs to model strategic environments that should allow the prediction of sales and operating results by the used strategies with some precision, although the level of success will be directly related with the user’s necessity.

Recent findings have demonstrated an increase in the prevalence of childhood obesity and overweight in Portugal, urging the need to study modifiable risk factors such as parental feeding practices. The Comprehensive Feeding Practices Questionnaire (CFPQ) is an important self-report measure assessing a broad range of responsive and non-responsive feeding practices. However, the CFPQ has not yet been validated in Portugal. Therefore, the present study aimed to test the validity of this measure with Portuguese parents of 2- to 8-year-old children. A sample of 409 parents completed a Portuguese-adapted version of the CFPQ and the already validated Child Feeding Questionnaire (CFQ). Confirmatory Factor Analysis (CFA), Exploratory Factor Analysis (EFA), and psychometric analysis were conducted. CFA demonstrated the original 12-factor structure did not fit the sample. EFA identified an 8-factor structure, comprising 29 items: Monitoring, Modeling, Environment, Involvement, Emotion Regulation, Restriction for Weight Control, Restriction for Health, and Pressure. Findings suggest that parental feeding practices are sensitive to parents’ background culture and children’s developmental period.

Diabetes is a prevalent global health issue associated with significant morbidity and mortality. Diabetic retinopathy (DR) is a well-known inflammatory, neurovascular complication of diabetes and a leading cause of preventable blindness in developed countries among working-age adults. However, the ocular surface components of diabetic eyes are also at risk of damage due to uncontrolled diabetes, which is often overlooked. Inflammatory changes in the corneas of diabetic patients indicate that inflammation plays a significant role in diabetic complications, much like in DR. The eye´s immune privilege restricts immune and inflammatory responses, and the cornea and retina have a complex network of innate immune cells that maintain immune homeostasis. Nevertheless, low-grade inflammation in diabetes contributes to immune dysregulation. This article aims to provide an overview and discussion of how diabetes affects the ocular immune system’s main components, immune-competent cells, and inflammatory mediators. By understanding these effects, potential interventions and treatments may be developed to improve the ocular health of diabetic patients.

Scientific and technological advances in telecommunications and onboard electronics, and advances in sustainability standards, dictated major changes to various industrial sectors, including the automotive industry, where hard and soft approaches to manufacturing are vying for market dominance. This work presents a prospective analysis of the autonomous vehicle (AV) market, analyzing three of the main US AV technology firms, Tesla, Waymo and Apple. Their designs and solutions are compared, and prospective scenarios were constructed based on an analysis of their strengths, weaknesses, opportunities and threats (SWOT). The results suggest that Tesla currently exhibits the greatest market leadership in the group studied. However, it was concluded that in the medium term, Waymo would surpass Tesla and assume market leadership. In the long run, it was concluded that Apple will overcome its rivals and dominate this market.

Leishmaniases are zoonotic vector-borne diseases caused by a wide variety of Leishmania species with complex transmission cycles involving different reservoirs, potential new hosts and vectors. Similarly, to other eukaryotes, Leishmania use released extracellular vesicles (LEVs) to play important initial interactions that are crucial to modulate the subsequent systemic immune response on the establishment of infection in humans and other important hosts like dogs. Recent studies in endemic areas of Brazil concluded that canine infections were predominantly due to L. amazonensis and not restricted to L. infantum (syn. Leishmania chagasi). Under these premises, the diagnosis of canine leishmaniasis needs to be improved, including the identification of current etiological agent, the clinical differential diagnosis and the histopathologic features. In this way, the dual aim of that study is to register collected observations for the diagnosis of natural canine infections and to insert in vitro results in the field of LEVs that still research gaps to be filled to understand the mechanisms and biological aspects involving the parasite-host interactions. Therefore, the future studies of Parasitology research for both of these fields are very important for the interventions for the prevention, control, elimination and eradication worldwide.

The interest in flying wings dates as far the early years of the aviation age. Over the 20th century, numerous attempts were made to investigate the feasibility of the concept, which demonstrated numerous early benefits: increased aerodynamic efficiency, reduced fuel consumption and lower noise and pollutant emissions compared to conventional tube and wing aircraft. However, major technical challenges prevented that type of design from entering mass production, especially with regards to structural design and manufacturing, stability and control and ride quality. In the 1990’s, a new concept, the blended wing body (BWB), was created to alleviate some of the concerns of flying wings while maintaining increased efficiency. Despite the promise, technical hurdles once again proved to be a deal breaker, and as of 2024, the only flying wing to enter serial production is the B-2 Spirit, an extremely complex and expensive aircraft. Thirty years later, as the world is quickly transitioning towards cleaner energy, the interest in the blended wing body has been renewed. The latest technological advancements in the aerospace industry should make the development of the BWB more plausible, however passenger comfort issues remain. Surprisingly, the BWB development may come from an unexpected application: as a tanker aircraft. As the U.S. Air Force is seeking a replacement to hundreds of aging tankers, a startup company was recently funded to develop the concept and build a prototype. In this study, we explore the history of blended designs from its early days, highlighting its opportunities and challenges – and why the design is an intriguing fit for application as a tanker aircraft.

Magnetorheological fluids (MRFs) are smart materials consisting of micro-scale magnetizable particles suspended in a carrier fluid. The rheological properties of a MRF can be changed from a fluid-state to a solid-state upon the application of an external magnetic field. This study reports the development of a particle-level simulation code for magnetic solid spheres moving through an incompressible Newtonian carrier fluid. The numerical algorithm is implemented within an open-source finite-volume solver coupled with an immersed boundary method (FVM-IBM) to perform fully-resolved simulations. The particulate phase of the MRF is modeled using the discrete element method (DEM). The resultant force acting on the particles due to the external magnetic field (i.e., magnetostatic polarization force) is computed based on the Clausius-Mossotti relationship. The fixed and mutual dipole magnetic models are then used to account for the magnetic (MAG) interactions between particles. Several benchmark flows were simulated using the newly-developed FVM-IBM-DEM-MAG algorithm to assess the accuracy and robustness of the calculations. First, the sedimentation of two spheres in a rectangular duct containing a Newtonian fluid is computed without the presence of an external magnetic field, mimicking the so-called drafting-kissing-tumbling (DKT) phenomenon. The numerical results obtained for the DKT case study are verified against published data from the scientific literature. Second, we activate both the magnetostatic polarization and the dipole-dipole forces and resultant torques between the spheres for the DKT case study. Next, we study the robustness of the FVM-IBM-DEM-MAG solver by computing multi-particle chaining (i.e., particle assembly) in a two-dimensional (2D) domain for area volume fractions of 20% (260 particles) and 30% (390 particles) under vertical and horizontal magnetic fields. Finally, the fourth computational experiment describes the multi-particle chaining in a three-dimensional (3D) domain allowing to study fully-resolved MRF simulations of 580 magnetic particles under vertical and horizontal magnetic fields.

Village has a vital role in the national development efforts. The concept of development considered village as an object instead of a subject of development. This study focused on determining the important points in enabling a village to be independent by shifting the paradigm of “building the village” into “the building village”. This study was an exploratory research of public policies with qualitative legal studies. This study was conducted in 3 villages in Bandung regency with different characteristics, namely Neglawangi with urban characteristics, Cibiru Wetan with sub-urban characteristics, and Rancamanyar with plural characteristics. The results of this study showed that the wise step in building an independent village is through “the building village” road maps. First, encourage the inception of critical and care community and community organizations who dynamically interact in the policy making processes of village development. Second, implement a participative, accountable, and transparent planning and budgeting system within the limits of their authorities. Third, empower inclusive village economic institutions. The three road maps can succeed if they are supported by good implementation of participative, systematic, effective and efficient planning and budgeting system, as well as good monitoring.

The olfactory system is capable of distinguishing individual odorants from among a virtually unlimited number. Fish, for example, detect changes in the electric field environment induced by prey and other sources. Floral electric fields exhibit variations in pattern and structure, which can be discriminated by bumblebees. We have constructed an electric field sensor, which, in the course of focussing on achieving maximum sensitivity and consistency, ultimately resembles features of the insect sensorium. A “fingerprint” 3D plot ( time, frequency range, voltage amplitude), representing the emitted electric field profile, is presented for each of a variety of odorants and other chemicals. The substance-specific electric-field emission and identification is not impeded by containers or barriers or distance.

Drafting is a common technique to reduce the drag experienced by elite runners on races, leading to better running efficiency and energy savings. The tactic has been successfully used in previous races where world records were set, especially by Eliud Kipchoge in the 2018 and 2022 editions of the Berlin marathon. In the 2023 edition of the Chicago Marathon, Kenyan runner Kelvin Kiptum broke the Marathon record after a 2:00:35 finish. This feat becomes even more impressive by the lack of use of drafting formations, despite the availability of two pacers for the majority of the race. In this study, the drag faced by Kiptum and his pacers during the race is calculated by means of computational fluid dynamics (CFD). The performance of each runner is evaluated from an energetic standpoint, and the analysis is extended to include more efficient drafting formations. Our results indicate that, by properly using the advantages of drafting, Kiptum could have finished the race at a staggering 1:57:34, a full three minutes better than his own record and 215 seconds better than the previous world record.

Nutraceuticals comprise dietary supplements, functional foods, medicinal foods, and pharmaceuticals. However, to date all these concepts are interpreted in different ways with the rapid increasing knowledge on nutrition, medicine, and plant biotechnology changing the concepts about food, health and agriculture. What matters are the bioactive elements conveyed by foodstuffs as nutrients or non-nutrients, which interfere with human metabolism and have impact on health, aging and well-being. Food, not nutrients, is the fundamental unit in nutrition and edible mushrooms, are fungi that supply unique biological compounds, different from plant or animal origin, which significantly impact on health status. Their influence on medicinal interventions has been known and studied for many years. The role on neurodegenerative disorders has been recently investigated and their significance on many other diseases has been well demonstrated. On this note it is synthesized the more recent knowledge of some edible mushrooms and preparations on Ménière’s disease, a lifelong condition it can develop at any age, but most commonly appearing between 40 and 60 years of age.

Acrylamide (AA), a molecule which potentially increases the risk of developing cancer, is easily formed in food rich in carbohydrates, such as biscuits, wafers and breakfast cereals, at temperatures above 120 °C. Thus, it is eminent the need to detect and quantify the AA content in processed foodstuffs, in order to delineate the limits and mitigation strategies. This work reports the development and validation of a high-resolution mass spectrometry-based methodology for identification and quantification of AA in specific food matrices of biscuits, by using LC-MSⁿ with electrospray ionization and Orbitrap as mass analyser. The developed analytical method showed good repeatability (RSD_r 11.1%) and 3.55 μg kg^-1 and 11.8 μg kg^-1 as limit of detection (LOD) and limit of quantification (LOQ), respectively. The choice of multiplexed targeted-SIM mode (t-SIM) for AA and AA-d3 isolated ions provided enhanced detection sensitivity, as demonstrated in this work. Results for AA concentration obtained vary between 323.7 and 2056.1 μg kg^-1. During baking an increase in AA concentration was observed, as well as between samples taken from different areas of the baking oven. Statistical processing of data was performed in order to compare the AA levels with several production parameters, such as time/cooking temperature, placement on the cooking conveyor belt, color and moisture for different biscuits. The composition of the raw materials was statistically the most correlated factor with the AA content when all samples are considered. The statistical treatment presented herein enables an important prediction of factors influencing AA formation in biscuits contributing for putting in place effective mitigation strategies.

Background: Demographic aging is a reality in developed countries, which poses a social challenge of great responsibility. Thus, numerous studies have been developed in an attempt to understand which factors best predict healthy aging. The aim of this study was to investigate and systematize literature on intervention programs that simultaneously include cognitive stimulation and physical activity, understand the importance of the use of new technology in these programs, and understand their impact on cognitive function in older adults, giving indications about their contribution to healthy aging. Methods: A narrative approach was used for extraction and synthesis of the data. Relevant studies were identified from electronic databases such as PubMed, Scopus, Web of Science and Academic Search Complete. Results: Thirty-two articles, involving 2815 participants, were identified. All selected studies were randomized controlled studies. The studies were published between 2011 and 2020. All studies included a combination of cognitive and physical interventions. Many of the studies used technology to administer the cognitive stimulation program. Conclusions: Most of the analyzed studies use new technologies in physical and cognitive interventions, demonstrating that this new form of intervention exerts lasting and stable benefits in cognition.

The development of electric aircrafts is becoming an important technology for achieving the goals set by the European Commission for the reduction of gases emissions by 2050 in the aeronautical transportation system. However, there is a gap between the values of specific power in commercial electric machines and the ones required for aeronautical applications. Therefore, the search for alternative materials and non-conventional designs is mandatory. One emergent solution is using superconducting machines and systems to overcome the current limits of conventional electrical machines. This work reviews the new hybrid and all-electric aircraft tendencies, complementing it with recent research on the design and development of high specific power superconducting machines. This includes the main topologies for hybrid and all-electric aircraft, with an overview of the ongoing worldwide projects of these types of aircrafts, systematizing the main characteristics of their propulsion systems. It also includes the research on superconducting machines for the purpose of high specific power, considering the impact on the redesign of aircraft systems in the electrical, cooling, and fuel source sense.

This article provides a comprehensive review of the intersection of 5G technology and Beyond, and Smart Grids, focusing on the potential of Vehicle-to-Fog as an industrial alternative for addressing energy efficiency challenges in data processing. This study aims to investigate relevant articles and patents to understand the collaborative potential between 5G and Smart Grids. It explores how to establish new regulatory standards within the architectural framework of 5G to facilitate decentralized data processing and remodel energy consumption patterns. The hypothesis suggests that decentralized 5G architecture and Smart Grids can be most effectively applied through vehicular fogging powered by solar energy. A combined quantitative and qualitative methodology guides the exploration of articles and patents. The study concludes by advocating for new standards that embrace decentralized 5G data processing, emphasizing the potential of Vehicle-to-Fog and the future deployment of 6G technology in Smart Grids. These advancements can significantly enhance energy efficiency in the context of 5G and pave the way for future innovations.

In this paper, we introduce the application of Type-I fuzzy inference systems (FIS) as an alternative to improve the prioritization in the FMECA analysis applied in cyber-power grids. Classical FMECA assesses the risk level through the Risk Priority Number (RPN). The multiplication between three integer numbers computes this, called risk factors, representing the severity, occurrence, and detectability of each failure mode and are defined by a team of experts. The RPN does not consider any relative importance between the risk factors and may not necessarily represent the real risk perception of the FMECA team members, usually expressed by natural language; this is the main FMECA shortcoming criticized in the literature. Our approach considers fuzzy variables defined by FMECA experts to represent the uncertainty associated with the human language and a rule base consisting of 125 fuzzy rules to represent the risk perception of the experts. To test our approach, we select a cyber-power grid previously analyzed by the authors using the classical FMECA. The results reveal our proposed fuzzy approach as promissory to represent the uncertainty associated with expert knowledge and to perform an accurate prioritization of failure modes in the context of electrical power systems.

The integration of bacteriophages, a particular class of viruses that specifically infect bacteria and archaea, in biosensors for the monitoring of pathogens in foods and beverages is highly desirable. To this end, an increasing focus has been set on the exploration of covalent and physical methods for the immobilization of phages on solid surfaces. This work investigates the electrostatic assembly of tailed phages, specifically anti-Listeria monocytogenes P100 phages, on an ultrathin self-assembled monolayer (SAM) of 11-amino-1-undecanethiol (AUT). The cationic properties of AUT may allow for the electrostatic capture of P100 in a capsid-down fashion, thus, exposing the specific receptor-binding proteins on their tails to the corresponding pathogens in analytical samples. The physical properties of immobilized phages have been studied using AFM, SEM, and electrochemical techniques, providing insight into the orientation of the phages and revealing that the pH plays a remarkable role in the morphology and charge transfer behavior of the adsorbed films. Overall, this research portrays SAMs of amino-akylthiols as a valid platform for the oriented immobilization of bacteriophages on surfaces for electroanalytical purposes.

This comprehensive review is devoted to an under-exploited family of phenolic compounds, the coumarins, and the most relevant strands in which they are involved in some spirit beverages – wine spirit, brandy, whiskey, sugar cane spirits (rum and cachaça) and grape marc spirit – with great importance worldwide in terms of production, trade and consumption. It gathers the key discoveries on the topic considering the production process of each spirit beverage, the related sources of coumarins (different kinds of wood used in the ageing stage) along with the factors that govern them and can influence the sensory properties of the aged beverages. An overview of the analytical methods available for their identification/quantification is also included, as well as the corresponding trends for the advancement of knowledge in this field. Moreover, the remarkable role of coumarins as nutraceuticals, their importance as chemical markers for authenticity purposes, and their relationship with food safety of these spirit beverages are also addressed, highlighting the current gaps and issues, and providing clues for future research.

Currently, in a context of biorefinery and bioeconomy, lignocellulosic biomass is increasingly used to produce biofuels, biochemicals and value-added products. Microwaves and ultrasounds are emerging techniques that enable efficient and environmentally more sustainable routes in the transformation of lignocellulosic biomass. This review is divided into four parts. In Part I, the theoretical foundations of microwaves and ultrasounds are revisited. Dielectric constants for biomass, factors that influence pre-treatment, are some of the subjects addressed. In Part II, the effects that these technologies have on lignocellulosic biomass (on the size and surface area of the particle; on the content of lignin, hemicellulose and cellulose; on the crystallinity index of cellulose; on the effect of solubilization of organic matter; on hydrolysis and reduction of sugars) are analyzed. In Part III, emphasis is given on how microwaves and ultrasounds can contribute to the achievement of value-added products. In this context, several examples of liquefactions and extractions are presented. Part IV describes examples of sonocatalysis of lignocellulosic biomass to obtain value-added products such as for instancethe production of furfural, which is significantly reduced by ultrasound.

Background: The 2021 “Universal Definition of Heart Failure (HF)” Proposed the following left ventricle ejection (LVEF) phenotype classification: ≤40%; HF with intermediate LVEF: between 41-49% and HF with preserved LVEF: ≥50%. LVEF represents the percentage of left ventricular ejected volume in each cardiac cycle and Cut-points considered statistically normal are: ≥52% in men and ≥54% in women. The prevalence HFpEF is of 35-60% among the HF phenotypes, with a facing to increase rates in relation to HFrEF and is associated with mortality rates similar to those of HFrEF. The pathophysiology of HFpEF is based on vascular and metabolic dysfunction, therefore, there is less neurohumoral stimulation compared to HFrEF. Methodology: A systematic review was performed to report of information related to Sacubitril-valsartan and the treatment of HFrEF. Terms related to “treatment” and “brazil” were used in the databases PubMed (MEDLINE) and Scientific Electronic Library Online (SCIELO). Results: Clinical trials testing drugs that modulate the neurohumoral system in patients with HFpEF failed to demonstrate benefit in the combined endpoint of reduced mortality/hospitalization due to HF compared to placebo to date. Sacubitril-valsartan is a drug with a mechanism of action surrogate the pathophysiological concept of HFpEF, it is safe and decreased endpoints of natriuretic peptides and left atrial structure in a phase II clinical study. Conclusions: The PARAGON-HF trial demonstrated that sacubitril-valsartan reduced the primary endpoint of the study when assessed the pre-specified subgroup of LVEF≤57% and improved the secondary endpoints of performance status and renal function in the population.

Background: Gingival enlargement is defined as an abnormal overgrowth of gingival tissues. A case of a 34–year–old female presenting with maxillary chronic inflammatory gingival enlargement associated with a nickel wire allergy is reported here. Replacement of the wire, good oral hygiene therapy and surgical therapy was carried out to provide a good aesthetic outcome. Histopathological evaluation was done of the excised specimen. There is only one similar case reported in literature to the best of our knowledge and ours is the second case. Result: A Histopathological diagnosis of inflammatory fibrous hyperplasia was established. No recurrence was reported at the end of 1 year. Conclusion: The patient should be made aware of the allergy at the initial visit and oral hygiene instructions should be reinforced at every visit. The significance of patient compliance during and following therapy as an important factor in the success of treatment.

Single-particle cryo-electron microscopy (cryo-EM SPA) has recently emerged as an exceptionally well-suited technique for determining the structure of membrane proteins (MPs). Indeed, in the last years, it was observed a huge increase in the number of MPs solved by cryo-EM SPA at a resolution better than 3.0 Å in the Protein Data Bank (PDB). However, sample preparation remains a significant challenge in the field. Here, we evaluated in the MPs solved by cryo-EM SPA deposited in the PDB in the last two years at a resolution below 3.0 Å the most critical parameters for sample preparation: i) the surfactant used for protein extraction from the membrane, ii) the surfactant, amphiphiles, nanodiscs or other molecules present in the vitrification step, iii) the vitrification method employed, and iv) the type of grids used. The aim is not to provide a definitive answer on the optimal sample conditions for cryo-EM SPA of MPs, but rather assess the current trends in the MP structural biology community towards obtaining high-resolution cryo-EM structures.

The medial septum (MS), as part of the basal forebrain, supports many physiological functions, from sensorimotor integration to cognition. With often reciprocal connections with a broad set of peers at all major divisions of the brain, the MS orchestrates oscillatory neuronal activities throughout the brain. These oscillations are critical in generating sensory and emotional salience, locomotion, maintaining mood, supporting innate anxiety, and governing learning and memory. Accumulating evidence points out that the physiological oscillations under septal influence are frequently disrupted or altered in pathological conditions. Therefore, the MS may be a potential target for treating neurological and psychiatric disorders with abnormal oscillations (oscillopathies) to restore healthy patterns or erase undesired ones. Recent studies have revealed that the patterned stimulation of the MS alleviates symptoms of epilepsy. We discuss here that stimulus timing is a critical determinant of treatment efficacy on multiple time scales. On-demand stimulation may dramatically reduce side effects by not interfering with normal physiological functions. A precise pattern-matched stimulation through adaptive timing governed by the ongoing oscillations is essential to effectively terminate pathological oscillations. The time-targeted strategy for the MS stimulation may provide an effective way of treating multiple disorders including Alzheimer’s disease, anxiety/fear, schizophrenia, and depression, as well as pain.

Antimony (Sb) has gained significance as a critical raw material (CRM) within the European Union (EU) due to its strategic importance in various industrial sectors, particularly in the textile industry for flame retardants and as a component of Sb-based semiconductor materials. Moreover, Sb is emerging as a potential alternative for anodes used in lithium-ion batteries, a key element in the Energy transition. This study focused on exploring the feasibility of identifying and quantifying Sb mineralizations through the spectral signature of soils using reflectance spectroscopy, a non-invasive remote sensing technique, and by employing deep learning algorithms such as Convolutional Neural Networks (CNNs). Common signal preprocessing techniques were applied to the spectral data, and the soils were analyzed by Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Despite achieving high R-squared values, the study faces a significant challenge of generalization of the model to new data. Despite the limitations, this study provides valuable insights into potential strategies for future research in this field.

Intrusion Detection Systems play a crucial role in a network. They can detect different network attacks and raise warnings on them. Machine learning-based IDSs are trained on datasets that, due to the context, are inherently large, since they can contain network traffic from different time periods and often include a large number of features. In this paper, we present two contributions: the study of the importance of feature selection when using an IDS dataset, while striking a balance between performance and the number of features; and the study of the feasibility of using a low-capacity device, the Nvidia Jetson Nano, to implement an IDS in a low-capacity network. The results, comparing the GA with other well-known techniques in feature selection and reduction, show that the GA has a higher F1-score of 76%, although the time to find the optimal set of features surpasses other methods; the reduction of the number of features reduces the processing time without a significant impact in f1-score. The Jetson Nano allows the classification of network traffic with an overhead of 10 times in comparison to a traditional server.

The microbioma is presently one of the hottest areas of scientific and medical research and exerts a marked influence on the host during homeostasis and disease. Fermented foods arise in the human relationship to the microbial environment. Further to the traditionally recognized effects of fermented foods and beverages on the digestive health and well-being there is now strong evidence on their general health benefits, namely the significance on the gut microbiota and brain functionality. We highlight the possibilities in this field, how little is still known, and call for a convergence of interdisciplinary research fields of One Health microbe-nutrition with fermented foods and gut-brain research. A consequence of civilisation, changes in present-day society in diets with more sugar, fat and salt, habits and lifestyle, contributes to the likelihood of an inflammatory microbiome, particularly the global epidemics of obesity and mental health. Although two recent papers claim that probiotics perturb rather than aid in microbiota recovery back to baseline after antibiotic administration in humans, consuming fermented foods has shown to reduce inflammation so improve gut health and the proper function of the body’s immune system.

Reliability assessment in traditional power distribution systems has played a key role in power system planning, design, and operation. Recently, new information and communication technologies have been introduced in power systems automation and asset management, making the distribution network even more complex. In order to achieve efficient energy management, the distribution grid has to adopt a new configuration and operational conditions that are changing the paradigm of the actual electrical system. Therefore, the emergence of the cyber-physical systems concept to face future energetic needs requires alternative approaches for evaluating the reliability of modern distribution systems, especially in the smart grids environment. In this paper, a reliability approach that makes use of failure modes of power and cyber network main components is proposed to evaluate risk analysis in smart electrical distribution systems. We introduce the application of Failure Modes and Effects Analysis (FMEA) method in future smart grid systems in order to establish the impact of different failure modes on their performance. A smart grid test system is defined and failure modes and their effects for both power and the cyber components are presented. Preventive maintenance tasks are proposed and systematized to minimize the impact of high-risk failures and increase reliability.

The difficulty in detecting tumors in earlier stages is the major cause of mortalities of patients, despite the advancements in treatment and research regarding ovarian cancer. Deep Learning algorithms are applied to serve the purpose of a diagnostic tool by applying them on CT scan images of the ovarian region. The images go through a series of pre-processing techniques and further the tumor is segmented using the UNet model. Instances are then classified into two categories – benign and malignant tumors. Classification is performed using Deep Learning models like CNN, ResNet, DenseNet, Inception-ResNet, VGG16 and Xception along with Machine Learning models such as Random Forest, Gradient Boosting, AdaBoosting, XGBoosting. DenseNet 121 emerges as the best model on this dataset even after applying optimization on the Machine Learning models by obtaining an accuracy of 95.7%. The current work demonstrates the comparison of multiple CNN architectures among themselves and with common Machine Learning algorithms, with and without optimization techniques applied.

Given the importance of the development of urban infrastructure and environmental impacts produced by the civil construction waste (CCW), it is important to correct the handling of CCW with objective solutions that are more environmentally friendly. In that sense the present study aimed to determine indicators that make it possible to estimate the amount of CCW generated from construction sites in the city of Londrina, Parana State, Brazil. The generation of CCW was estimated in a general way, regarding the composition of its mixture, correlated to the gross areas of the buildings studied and their generated volumes of RCC. This generating rate was evaluated in a general way and specifies two types of sites: the new residential and new non-residential constructions. The data required for the development of these indicators was obtained through extensive survey and interviews carried out at the environment secretariat of the City Hall. The generating rate of CCW obtained for non-residential buildings was 0.2052m3/m2 or 170.44kg/m2, for new residential sites was 0.2054m3/m2 or 170.60kg/m2 and for new commercial or non-residential construction sites, it was 0.20453 m3/m2 or 169.85kg/m2. It was also possible to estimate the amount generated annually per inhabitant in the municipality, which is 0.60m3/inhabit.year or 498.55kg/inhabit.year.

With the continuous growth of electric and electronic appliances’ usage, the waste produced with obsolete material (e-waste) has an increasing environmental impact. Also, the production of such appliances bears to increased consumption of natural resources and produces a multitude of toxic and hazardous substances, which typically are not properly treated. One of the approaches that may be adopted to reduce such problems relies on the circularization of the current linear model, commonly adopted in the EEE value chain. This includes recovering eol products and reintroducing its parts, components, or raw materials into the value chain (e.g. semiconductors, circuit boards, raw metals, etc.), thus contributing to a more sustainable value chain. In this article, we present a state-of-art review that focuses on approaches and solutions for the EEE value chain traceability, and analyses the technologies that may be beneficial for promoting and implementing the CE model in this value chain.

This study aimed to evaluate the physico-chemical properties, biocompatibility and bioabsorption of 3 different new membranes for bone guided regeneration (PLGA associated with hydroxyapatite and beta-TCP) with three thicknesses (200, 500 and 700 µm) implanted in mice subcutaneously. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and the quantification of Carbon, Hidrogen and Nitrogen were used to characterize the physico-chemical properties. One hundred Balb-C mice were divided into 5 experimental groups: Group 1 - Sham (without implantation); Group 2 - 200 μm; Group 3 - 500 μm; Group 4 - 700 μm; and Group 5 - Pratix®. Each group was subdivided into four experimental periods (7, 30, 60 and 90 days). Samples were collected and processed for histological and histomorphometrical evaluation. The membranes showed no moderate or severe tissue reactions in the experimental periods studied. The 500 μm membrane did not show tissue reaction for any experimental periods studied. The 200 μm membrane membranes began to exhibit fragmentation after 30- day, while the 500 and 700 µm membranes started the fragmentation at 90-day. All membranes studied were biocompatible, and the 500µm membrane showed the best results being a promissory membrane for bone guided regeneration.

The hydrothermal synthesis of aluminophosphate molecular sieve type AlPO4-11 was processed from chemicals containing psueudobohemite, 85% phosphoric acid, water, and di-isopropylamine as templating agent. The crystallization of the samples was studied by taking samples in times from 2 to 74 hours. The obtained white powder products have been characterized by XRD patterns, FT-IR spectra, thermogravimetric data, scanning electron microscopy and pH measurement of the mother liquor. The pore volume, as determined from TG and DTG curves, was ca. 0.17 cm3g-1. The crystallization process of the aluminophosphate exhibited in its initial phase a behavior of first order reaction with a specific velocity constant of ca. 0.25 h-1, as determined from XRD and FT-IR data.

Quantum computing is tipped to lead the future of global technological progress. However, the obstacles related to quantum software development are an actual challenge to overcome. In this scenario, this work presents an implementation of the quantum search algorithm in Atos Quantum Assembly Language (AQASM) using the quantum software stack my Quantum Learning Machine (myQLM). We present the creation of a virtual quantum processor whose configurable architecture allows the analysis of induced quantum noise effects on the quantum algorithms. The codes are available throughout the manuscript so that readers can replicate them and apply the methods discussed in this article to solve their own quantum computing projects. The presented results are consistent with theoretical predictions and demonstrate that AQASM and myQLM are powerful tools for building, implementing, and simulating quantum hardware.

The article addresses the importance of nutrition in the health of the elderly population and focuses on the qualitative evaluation of menus provided by a social solidarity institution in Portugal, in order to prevent and/or treat malnutrition or the risk of malnutrition in this vulnerable population. The methodology involves the evaluation of four weekly menus, totalling 28 complete daily menus for the elderly, using the “Avaliação Qualitativa de Ementas para a População Idosa” (AQEDI) tool. The assessment grid is organized into six domains (general items, soup, protein suppliers, carbohydrate supplier side, vegetable side and dessert), each composed of various parameters. The results indicate that all menus were classified as "acceptable”, with percentages ranging from 60.73% to 68.84%, and suggests that while the menus are deemed acceptable, there is room for improvement. Recommendations include increasing the presence of eggs and including seasonal fruits daily, avoiding canned fruit. The study emphasizes the need for coordinated efforts within the institution to enhance menu planning, considering both nutritional guidelines and the sensory aspects of food. Coordination efforts within the institution are crucial for preserving positive aspects and addressing inadequacies in menu planning.

Background: During anatomy (topographic) chair, we prepared an anatomic piece of an older female pelvis (unknown causa mortis). Here, we present an anatomic piece prepared by medical students that helped us to better understand hypertrophic bladder pathophysiology. Methods: A traditional corpse dissection guided by an assistant professor. Results: Corpse dissection enhanced our personal experience during the medical course. It also helped us to better visualize how big a hypertrophic urinary bladder can become as the etiologic cause is not taken care. Conclusions: Despite virtual and 3D anatomy lessons, we believe corpse dissection must remain as a teaching strategy that can help to build a new generation of surgeons as well as honor the History of Medicine.

The open hole tensile and flexural test of composites holds immense importance in aerospace and structural engineering. These tests provide critical insights into how composites perform under real-world conditions, allowing for the development of materials that meet rigorous standards, thereby ensuring the safety and durability of aircraft and other applications. This study investigates the influence of hole size on the open hole tensile (OHT) and flexural properties (OHF) of plane woven aramid/epoxy (AFRP), basalt/epoxy (BFRP), and aramid-basalt/epoxy (ABFRP) sandwiched laminates. Specimens with three different hole sizes viz., 4 mm, 6 mm, 8 mm were prepared and tested according to ASTM D5766 and ASTM D7264 for OHT and OHF performance respectively. Results indicated that the hybridization of aramid-basalt layers in a sandwich lay up significantly improved the mechanical performance when compared to only aramid laminate. However, with the increase in hole size the mechanical properties declined irrespective of the material. Basalt fibres showed higher hole sensitivity under tensile loading due to its brittle fracture mechanism while aramid fibres exhibited higher hole sensitivity under flexural loading which can be attributed to its the poor compressive strength. The effect of hole size on the damage mechanism has also been highlighted through scanning electron microscope (SEM). Major failure modes observed are delamination around the hole edges, ductile and brittle fibre fractures, and delamination.

Dogs play an important role in the transmission of Leishmania infantum but epidemiologic and clinical studies of canine tegumentary leishmaniasis (CTL) are scarce. In an endemic area of human American Tegumentary Leishmaniasis (ATL) caused by Leishmania braziliensis, we determine the prevalence and incidence of both CTL and subclinical (SC) L. braziliensis infection in dogs and evaluated if the presence of dogs with the CTL or the SC L. braziliensis infection is associated with the occurrence of human ATL. SC infection in healthy animals and CTL in animals with ulcers was determined by PCR on biopsied healthy skin or on the ulcer or detecting antibodies against soluble leishmania antigen. We compared the occurrence of human ATL in homes with dogs with CTL or SC infection with control homes without dogs or with dogs without CTL or SC infection. The prevalence of SC infection was 35% and of CTL 31%. The incidence of SC infection in dogs was 4.6% and of CTL was 9.3%. The frequency of ATL in humans was 50% in homes with infected dogs and 13% in homes without L. braziliensis infection in dogs. CTL and SC infection is highly prevalent, and dogs may participate in the transmission chain of L. braziliensis.

Background: When homeostasis is disturbed it can occur a pathological event named inflammation. The main drugs used in the treatment consist of the non-steroidal and steroidal anti-inflammatory drugs. However, the side effects remain an obstacle during the treatments. In this work we aimed to evaluate three new regioisomers analogues of naphthyl-N-acylhydrazone derivatives. Methods: Acute models of inflammation in vivo (formalin-induced licking and carrageenan-induced inflammation) as well as in vitro were used to evaluate the effects of LASSBio-2039, LASSBio-2040, and LASSBio-2041. Results: All three substances (at 1, 10 or 30 µmol/kg) presented significant effect in the in vivo model reducing leukocyte migration, nitric oxide (NO) and interleukin-1β production. It was observed that only LASSBio-2039 significantly reduced cell migration in vitro. None of the LASSBios did affect inducible nitric oxide synthase activity nor presented NO scavenger effect. It was not observed any toxic effect neither in vivo nor in vitro. The new regioisomers analogues of naphthyl-N-acylhydrazone derivatives presented a significant anti-inflammatory activity suggesting LASSBio-2039 with a direct effect in leukocytes migratory capacity. Conclusions: Taken together the data indicate that these substances present promising effect for de development a prototype for new drugs.

Melt mixing is a convenient method to prepare polymer nanocomposites, but the extent of the dispersion of the solid filler reached is often limited, and may compromise the anticipated performance of these materials during service. Since the efficiency of extensional flows on dispersion is now well recognized, several mixers were designed with the aim of inducing both shear and extensional flow components. This work combines experimental and numerical data to better understand the kinetics of the dispersion of graphite nanoplates in a polypropylene melt, using a mixing device that consists of a series of stacked rings with equal outer diameter and alternating larger and smaller inner diameters, thus creating a series of converging/diverging flows. Numerical simulation of the flow using the opensource OpenFOAM software assuming both inelastic and viscoelastic responses predicted the velocity, streamlines, flow type and shear and normal stress fields for the mixer. Experimental and computed data were combined to determine the trade-off between the local degree of dispersion of the PP/GnP nanocomposite, measured as Area ratio, and the absolute average value of the hydrodynamic stresses multiplied by the local cumulative residence time. From considerations based on a theoretical approach to dispersion, the cohesive strength of the GnP agglomerates studied was estimated to be in the range 3 - 10kPa.

Agricultural crops productivity is heavily influenced by the strength of their seeds. Current methods for testing seed vigor, such as the germination rate and tetrazolium test, rely on time-consuming human visual inspections. Computer Vision, a crucial technology in smart production processes, offers an automated alternative and is increasingly applied in digital agriculture processes. Here we propose a method that combines YOLOv8 and morphological analysis of seeds using X-ray images to aid seed quality analysts in classifying seed lots based on their physiological potential. We examined the internal morphology of three seed lots and generated X-ray images to train a YOLOv8-based model with a post-segmentation module. This model assessed various parameters such as the total seed area, area filled by the embryo and endosperm, length, width, and calculated the percentage occupied by the embryo and endosperm in relation to the total seed area. Subsequently, seeds were classified into four categories based on the internal area occupied by the endosperm and embryo. Our findings reveal the robust performance of the YOLOv8 model in segmenting and classifying despite the challenges posed by a relatively small dataset. Notably, the proposed model achieved an impressive accuracy of up to 95.6% in identifying and segmenting the endosperm over 1,500 epochs with just 15 training images. The endosperm/seed area ratio, particularly within the 50-60% range covering over 50% of the samples, emerged as a significant metric for evaluating the viability of seed batches.

Low back pain is prevalent in equestrian athletes, but prevalence and associated factors are unknown in the Portuguese equestrian population. A questionnaire regarding low back pain and possible associated factors was answered by 347 respondents. Estimated 12-month prevalence was 67.1%. The probability of suffering from low back pain was higher in individuals with higher weekly riding workload, that reported equestrianism as their main occupation and that performed daily stable duties. The Roland Morris disability questionnaire was applied to the respondents that stated having experienced low back pain in the past 12 months, resulting in an average score of 5.39 ± 4.42. 63.1% of respondents stated that low back pain impaired their performance. Individuals that stated equestrianism was their main occupation showed a significant higher risk (OR = 1.759) of exhibiting a score ≥ 4, as measure of dysfunctionality. Age and high body mass index were also associated to a dysfunctional score. Further research is needed to fully understand the impacts of low back pain in Portuguese equestrian athletes.

Autism Spectrum Disorder (ASD) is a neurodevelopmental condition, characterized by persistent deficits in communication/social interaction and restricted and repetitive patterns of behavior, interests or activities. It is usually identified in childhood, despite late diagnoses in cases of greater functionality. Havighurst proposes a set of fundamental tasks throughout the life cycle, whose achievement is probably compromised in the ASD, even though it lacks scientific evidence. This study innovates, as it is based on Havighurst's theoretical model for understanding the development process of three adults and one young person, diagnosed with ASD level I, at different life stages. Through the methodology of life histories, interviews were subject to content analysis. Results pointed out the early detection and interventions importance, minimizing adversities, above all by those who had late diagnoses. Self-perceived success, not expected, was found in some development tasks (e.g. conscience and morality development). Also were noticed expected limitations related to ASD (e.g. difficulties in relationships with peers and in the labor market inclusion). Probably, in cases of greater severity and less functionality/autonomy, there would be greater failure in development tasks. It is crucial to improve research on this developmental model and on the factors that delay the diagnosis, including cases of different levels of severity.

The Surface Urban Heat Island (UHI) is caused by the difference in temperature between the urban and its surrounding areas. However, in the scientific literature, there is no solid methodology defining urban and non-urban areas, which is essential to estimate the SUHI with greater accuracy. This study uses the official national urban areas limit, to obtain the SUHI more accurately on the nine northeastern Brazilian capitals. The land surface temperature was obtained using the Sentinel 3 satellite data for the years 2019 and 2020. Afterward, the maximum and average SUHI, and the complementary indexes were calculated, such as the Urban Thermal Field Variation Index (UTFVI) and the Thermal Discomfort Index (TDI) for the urban areas and their surrounding areas. The Maximum and Average SUHI, obtained values between 1.85 and 8.25 and -4.92 and 2.59 degree difference, respectively, proving the SUHI existence in the study areas. The UTFVI, with values between 0.010 and 0.040, expresses how bad the eco-environmental spaces of urban are. The TDI, with values between 24.61 and 28.89 ºC, expresses the population’s thermal comfort. Therefore, this study provides a better understanding of the surface UHI pioneeringly for the Brazilian Northeast Region.

The Land Surface Temperature (LST) is an essential indicator for analyzing the Surface Urban Heat Island (SUHI). A factor contributing to its occurrence is the reflections of the different materials in urban and rural areas, which significantly affect the energy balance near the surface. Therefore, recent studies have increasingly used the Local Climate Zones (LCZ) classification system to discriminate those urban areas. Therefore, our study aims to do a systematic review using the PRISMA method of LCZ classification applied to understand the LST and the SUHI phenomenon. At first, it was found in the scientific literature 10,403 articles which, after passing through filtering stages, resulted in 51 that were further analyzed. Our results showed that these articles were very recent, beginning in 2016. However, presenting an increasing trend. China was the country with more studies. Landsat and TERRA/AQUA sensors appeared in 82% of the studies. The method that appears the most to LCZ definitions is from the World Urban Database. Finally, considering the current climatic changes, this systematic review can help new studies on SUHI identification through LCZ in different world areas using remote sensing data to estimate the LST.

Camptothecin (CPT) is a potent anticancer drug, and its putative oral administration is envisioned although difficult due to physiological barriers that must be overcome. A comprehensive biophysical analysis of CPT interaction with biointerface models can be used to predict some pharmacokinetic issues after oral administration of this or other drugs. To that end, different models were used to mimic the phospholipid composition of normal, cancer, and blood-brain barrier endothelial cell membranes. The logD values obtained indicate that the drug is well distributed across membranes. CPT-membrane interaction studies also confirm the drug’s location at the membrane cooperative and interfacial regions. The drug can also permeate membranes at more ordered phases by altering phospholipid packing. The similar logD values obtained in membrane models mimicking cancer or normal cells imply that CPT has limited selectivity to its target. Furthermore, CPT binds strongly to serum albumin, leaving only 8.05% of free drug available to be distributed to the tissues. The strong interaction with plasma proteins, allied to the large distribution (VDSS=5.75 ± 0.932 L·Kg-1) and tendency to bioaccumulate in off-target tissues, were predicted to be pharmacokinetic issues of CPT, implying the need to develop drug delivery systems to improve its biodistribution.

Sustainability, particularly in construction materials, has been a subject of growing interest. Civil construction is one of the industries where more materials are consumed, which leads to high energy consumption and CO2 emissions. The production of cement, especially clinker is largely responsible for these problems. As a solution, new materials emerge, which do not require much energy for their production, which are the alkaline cements, specifically the geopolymers. Geopolymers are inorganic polymers obtained by the alkaline activation of aluminosilicate precursors. In the present study geopolymers were developed with low grade kaolin (as a precursor) from a Portuguese company. The development of these geopolymers will be, due to their properties, a good solution for rehabilitation of earth buildings, especially in adobe. The development of these geopolymers is also a contribution to the sustainability of kaolin exploitations as it opens new markets for the low grade kaolins, presently not easily commercialized. As mechanical strength of adobe materials ranges in literature from 0.6 to 8.3 MPa, the values obtained for the developed geopolymers (between ~2 to 10 MPa) can be considered as totally adequate.

In this article we presented an application of the quantum cosmological model in teleparallel gravity. Working with a vacuum solution, the gravitational energy density is quantized with the Weyl procedure and we obtain a discrete expression for the gravitational energy. As an immediate consequence the empty space exhibits an expansion for an early universe.

Using pumps operating as turbines (PATs) offers the possibility of increasing the sustainability of water and energy systems by recovering the excess of energy that would be otherwise lost in pressure reducing valves or head loss chambers. In on-grid applications, there are many research works and implementations of PATs. However, there is still limited research for the optimization of efficiency and stability of PATs operating in off-grid systems. This work contributes to the development of stable direct current (DC) off-grid electric systems based on PATs, by optimizing and analysing the energy efficiency and stability for a wide range of operation. A self-excited induction generator (SEIG) coupled to the PAT is provided to cover the conventional type of electric ma-chines typically coupled to the hydraulic pumps. In this context, a methodology is proposed, based on the hydraulic, mechanical and electric subsystems, to define the PAT-SEIG operational area, to maximize energy conversion and the system efficiency. This will guarantee stable electric output quantities when operating in a DC off-grid system. In addition, an analytical model is proposed to estimate the PAT-SEIG operation under specific conditions. With this, water managers are suitable to design and optimize an off-grid PAT-SEIG system and to define the best hydraulic machines, electronic equipment, and all different control elements to maximize energy conversion within the target of operational limits. To develop and verify this new methodology, two micro PAT-SEIG setups were implemented in the hydraulic laboratory of IST/CERIS under typical operating conditions. The proposed solution proved to be resilient under a variable load regime. The system's maximum efficiency can be adapted using different capacitor values for the excitation of the SEIG, and the operational range is limited to the electric components. Considering the nominal efficiencies of the system’s components, the maximum p.u. efficiency obtained for each PAT-SEIG system were between 0.7 and 0.8 p.u.

Deep learning architectures like ResNet and Inception have produced accurate predictions for classifying benign and malignant tumors in the healthcare domain. This enables healthcare institutions to make data-driven decisions and potentially enable early detection of malignancy by employing computer-vision-based deep learning algorithms. These Convolutional Neural Network algorithms, in addition to requiring huge amounts of data, can identify higher and lower-level features that are significant while classifying tumors into benign or malignant. However, these algorithms have limitations concerning explainability and identifying the exact features that are of importance and contributing to the final classification of tumors as benign or malignant. In this paper, we implement several explainable AI techniques, namely, LIME, Saliency Map, Occlusion Analysis, Grad-CAM, SHAP, and Smooth Grad to interpret the results of a custom ResNet60 classifier in the classification of ovarian tumors as benign or malignant. The ResNet60 model attained an accuracy of 97.50% for the test dataset.

This study’s primary goal was to conduct an analysis on the flood propensity of the Tabua (Ribeira Brava) drainage basin’s main watercourse. In addition to that, this study also recommends two different methodologies in order to mitigate flood’s impacts, namely by dimensioning a detention basin and adjusting the riverbed roughness coefficient. Regarding the study on the flood propensity, it was necessary to resort to geomorphological data, which was obtained when characterizing the watershed; that data was crucial to determine the expected peak flow rate, according to the Gumbel Distribution methodology and considering a 100 years return period, and to perform necessary tasks in the SIG ArcGIS software. Lastly, it was also analyzed the drainage capacity of this drainage basin’s river mouth, in order to conclude whether it would have the capacity to drain the total volume of rainwater if an extreme flood event was to happen. Indeed, the main results point out that this watershed’s river mouth doesn’t have the necessary drainage capacity to cope with an extreme event, for the return period that was considered. As a consequence of that, the two mitigation measures aforementioned were developed considering Tabua (Ribeira Brava) drainage basin’s specific features: the sizing of the detention basin was estimated through the Dutch Method and the Simplified Triangular Hydrograph Method, while the adjustment of the roughness coefficient was considered a valid solution to enhance the drainage capacity of this river mouth.

Metastatic melanoma patients have a poor prognosis with poor responsiveness to chemotherapy. BRAF V600E mutations have been detected in ~40% of melanoma patients. Vemurafenib is an oral agent licensed for patients with BRAF V600E mutation-positive inoperable and metastatic melanoma, which already presents resistance that leads to patient relapse and the serious side effects. In our study, we synthesized 5 new vemurafenib analogs, RF-86A, RF-87A, RF-94A, RF-94B and RF-96B, with structural improve-ments, in order to increase the anti-proliferative and anti-metastatic effect on human melanoma. We showed that the analogs were efficient in inducing cell death and reducing the migration of A375 cells, by inhibition of MMP-2 and MMP-9 activity, indicating that this action may be longer lasting comparing to the action of Vemurafenib.

(1) Background: Nursing homes’ preparedness in managing a public health crisis has been fragile, with effects on safety culture. The objective of this study was to assess nursing homes’ COVID-19 preparedness in Southern Portugal, including personnel’s work experiences during the pandemic. (2) Methods: We used a COVID-19 preparedness checklist to be completed by management teams, followed by follow-up calls to nursing homes. Thereafter, a survey to personnel was applied. Data analysis included descriptive statistics, exploratory factor analysis, and thematic analysis of open-end questions. (3) Results: In total, 71% (138/195) of eligible nursing homes returned the preparedness checklist. We conducted 83 follow-up calls and received 720 replies to the personnel survey. On average, 25% of nursing homes did not have an adequate decision-making structure to respond to the pandemic. Outbreak capacity and training were fragile areas among nursing homes’ contingency plans. We identified compliance with procedures and nonpunitive response to mistakes as fragile areas of safety culture, and teamwork as a strong safety area. (4) Conclusions: To strengthen how nursing homes cope with upcoming phases of the COVID-19 pandemic or future public health emergencies, nursing homes’ preparedness and safety culture should be fostered and closely monitored.

1) Background: The objective was to evaluate the corrosion resistance of different commercially pure ultrafine-grained (UFG) titanium and its alloys with acid etched surface processed by equal-channel angular pressing (ECAP); 2) Methods: Coarse-grained and UFG titanium samples were investigated using polarization resistance technique. Surface characteristics of the native oxidized layer were evaluated by TEM and XRD. Electrochemical tests were under physiological electrolyte at a rate of 1 and 10 mV/s. Weight loss tests were performed after immersion into HCl solution for up to 3 years; 3) Results: UFG titanium was less susceptible to corrosion which was identified under lower rates and at higher polarization resistance than its coarse grain counterparts. Titanium Grade 2 and Grade 4 demonstrated similar corrosion susceptibility. Titanium Grade 5 revealed a thin and tightly adhered native oxide layer with adequate corrosion resistance; 4) Conclusions: ECAP process imposed a more compact and adhered oxidized layer. Surface etching techniques delivered a thicker native TiO₂ layer, being both grain refinement and surface etching techniques responsible for the improved corrosion resistance of Titanium samples under physiological environment after 3 years of observation.

Keywords: Wood residuals; Forest biomass; Wood composite; Wood floor; Life Cycle Assessment.

Terpenoids, including monoterpenoids (C₁₀), norisoprenoids (C₁₃) and sesquiterpenoids (C₁₅), constitute a large group of plant-derived naturally occurring secondary metabolites which chemical structure is highly diverse. A quantitative structure-activity relationship (QSAR) model to predict the terpenoids toxicity and to evaluate the influences of their chemical structure, was developed in this study, by assessing the toxicity of 27 terpenoid standards using Gram-negative bioluminescent Vibrio fischeri, in real time. Under the test conditions, at concentration of 1 µM, the terpenoids showed a toxicity level lower than five %, with exception of geraniol, citral, (S)-citronellal, geranic acid, (±)-α-terpinyl acetate and geranyl acetone. Moreover, the standards tested displayed a toxicity level higher than 30 % at concentration of 50 to 100 µM, with the exception of (+)-valencene, eucalyptol, (+)-borneol, guaiazulene, β-caryophellene and linalool oxide. Regarding the functional group, the terpenoids toxicity was observed in the following order: alcohol > aldehyde ~ ketone > ester > hydrocarbons. CODESSA software was employed to develop the QSAR models based on the correlation of terpenoids toxicity and a pool of descriptors related to each chemical structure. The QSAR models, based on t-test values, showed that terpenoids toxicity was mainly attributed to geometric (e.g., asphericity) and electronic (e.g., max partial charge for a C atom [Zefirov's PC]) descriptors. Statistically, the most significant overall correlation was the four-parameter equation with training and test coefficient correlation higher than 0.810 and 0.535, respectively, and square coefficient of cross-validation (Q²) higher than 0.689. According to the obtained data, the QSAR models are a suitable and a rapid tool to predict the terpenoids toxicity in a diversity of food products.

This work introduces a novel numerical method designed to address three-dimensional unsteady free surface flows incorporating integral viscoelastic constitutive equations, specifically, the K-BKZ-PSM (Kaye–Bernstein, Kearsley, Zapas - Papanastasiou, Scriven, Macosko) model. The new proposed methodology employs a second-order finite difference approach along with the deformation fields method to solve the integral constitutive equation, and the marker-particle method (known as \emph{Marker-and-Cell}) to accurately capture the evolution of the fluid's free surface. The newly developed numerical method has proven its effectiveness in handling complex fluid flow scenarios, including confined flows and extrudate swell simulations of Boger fluids. Furthermore, a new semi-analytical solution for velocity and stress fields is derived, considering fully developed flows of a K-BKZ-PSM fluid in a pipe.

Mycotoxins are fungal secondary metabolites, which can cause acute and chronic toxic effects in animals and humans. The present study aimed to determine multi-mycotoxin levels in Algerian workers using urine as target. A method based on a QuEChERS (quick, easy, cheap, effective, rugged, and safe) extraction procedure followed by LC-MS/MS (liquid-chromatography tandem mass spectrometry) was optimized and validated for determination of 11 mycotoxins in 96 urine samples. Different sorbents were tested to be used in the dispersive solid-phase extraction (d-SPE) cleanup step of QuEChERS. The final method was fit-for-purpose and showed good analytical performance in terms of specificity, linearity and precision. All samples contained at least 2 mycotoxins, being toxin-2 (T-2) the most common, which was found in 92.7% of the samples, followed by zearalenone (ZEN) with 90.6% of positive samples, and ochratoxin A (OTA) with 86.4%. T-2 levels ranged from 0.3 μg/L to 36.3 μg/L, while OTA ranged from 0.3 μg/L to 3.5 μg/L and ZEN ranged from 7.6 μg/L to 126.8 μg/L. This was the first mycotoxin biomonitoring study carried out in the Algerian population. The findings highlight the need of accurate data for better risk assessment and the development of better regulation to manage mycotoxin contamination in this country.

Oral health involves physiological functions related to mouth, teeth and orofacial structures, but also includes psychological and social dimensions. In this sense, oral health is an integrated part of human general health and well-being. Our aim was to access and evaluate the general oral health status of a high- and elite-level sample of Portuguese athletes from different sports. One hundred and sixteen participants were examined regarding their dental relationships, teeth and periodontal health, the presence of parafunctional activities (bruxism), and current or past orthodontic treatment. Our sample were predominantly adolescents and young adults, including 54 high-level and 62 elite subjects (71 males and 45 males) from 11 different sports, but mainly from swimming and athletics. Most sport performers presented with normocclusion (77%), despite the presence of other sagittal, transverse and vertical malocclusions. Twenty-three participants were affected by dental caries and six had missing teeth. Gingivitis (~40%) and dental calculus (~30%) were presented in our sample. Bruxism signs (47%) and current or past orthodontic treatment (~22%) were also found. Oral health conditions are not under control among high- and elite-level athletes, supporting the importance of healthcare needs and oral health promotion strategies in sports.

Fungal infections caused by Candida spp. are responsible for high hospital morbidity and mortality rates. Therefore, there is a continuous search for new antifungal medicines, particularly ones with anti-Candida activity. This review analyzed articles published between 2002 and 2023 considering the anti-Candida activity of chemical compounds identified or isolated in plants of the Anacardiaceae family. In addition, the in-silico prediction of the isolated compounds described was performed. The analysis of 35 studies showed that extracts, essential oils, and compounds from the anti-Candida activity were frequently determined in vitro using the minimum inhibitory concentration (MIC). The most commonly tested species were Candida albicans, C. tropicalis, C. parapsilosis, C. glabrata, C. krusei, and C. guilliermondii, respectively. Essential oils were the most used form (37% of the studies). The isolated compounds with antifungal effects include cardanol, estragole, trans-anethole, β-caryophyllene, myrcene, catechin-3-o-rhamnoside, β-sitosterol-3-O-glucoside, 24Z-isomasticadienolic acid, oleanolic acid, and oleanolic aldehyde. The in-silico evaluation of those isolated compounds revealed the compounds' drug-likeness and possible antifungal activity. However, some of them showed high toxicity. In conclusion, compounds from the Anacardiaceae family show promise for developing new therapeutic antifungal drugs, especially in combination with conventional antifungals.

A sustainable matrix based on eucalyptol essential oil/sawdust was developed and applied on one-sided laminated plywood. This finish aims to serve as a eucalyptol odor slow release. Eucalyptol odor release was monitored with gas chromatography coupled with a flame ionization detector (GC – FID: Limits of Detection and Quantification of 0.70 g/m3 and 2.11 g/m3, respectively, and with linearity up to 18.6 g/m3). Measurement of the eucalyptol odor released was performed during a six-month period and it was found that the release followed a first-order exponential decay with a decay rate constant of 0.0169 per day. The half-life was determined to be of 48 days. The granulometry and particle size porosity of sawdust were analyzed by Scanning Electron Microscopy. Sawdust size fraction between 112 – 200 μm showed best eucalyptol absorption capacity with 1:3 masses ratio (sawdust:eucalyptol). The time capacity of eucalyptol release depends of composite eucalyptol – sawdust quantity. Where this relation was determined: 15.0 grams of composite eucalyptol-sawdust by 0.8 mm diameter aperture gave 6 months of eucalyptol release, that was considered very positive, understanding high volatility of eucalyptol and a small quantity of composite for further products. The new product is characterized by a carbon footprint (considering the industry frontiers) of 5.94 kg CO2eq/m2 of plywood floor.

Intrinsic subtype of triple-negative breast cancer (TNBC) is based on genomic evaluation. In this study, we report the survival and pathological complete response (pCR) rates of TNBC patients subtyped by IHC and treated with neoadjuvant chemotherapy (NACT). A retrospective cohort of 187 TNBC patients who received NACT between 2008 and 2017 was used, and IHC subtyping was performed on biopsy specimens before chemotherapy. The subtyping revealed predominant basal-like tumors (IHC-BL, 61%), followed by basal-like immune-suppressed (IHC-BLIS, 31%), mesenchymal tumors (12.5%), luminal androgen receptor tumors (IHC-LAR, 12%) and basal-like immune-activated (IHC-BLIA, 10.9%). The pathological complete response (pCR) rate varied among subtypes, with IHC-BLIA showing the highest (30.0%) and IHC-LAR showing the lowest (4.5%). IHC-BLIS led in recurrence sites. Overall and disease-free survival analyses did not show significant differences among subtypes. Although, IHC-BLIA demonstrated a trend toward better survival and IHC-mesenchymal worse. Patients who achieved pCR exhibited significantly better disease-free survival and overall survival than non-responders. This study underscores the potential of IHC-based subtyping in TNBC management, highlighting distinct response patterns to neoadjuvant chemotherapy and potential implications for treatment strategies. Further research is warranted to validate these findings and explore tailored therapeutic approaches for specific TNBC subtypes.

Shear thickening fluids (STF) are a class of fluids whose viscosity significantly rises under external loads. The research on these fluids has been advancing in recent years regarding prospective practical applications, including developing impact-absorbing composites. Following the green agendas governments and legislators advocate, this study investigates the combination of STF and other sustainable materials. Cork is a naturally occurring cellular material with a negative carbon footprint and superior energy absorption properties. With varying concentrations of STF material, cork agglomerates were formed. Notably, the analysed blends are homogeneous, contrasting with previous literary works. A series of experiments were conducted in quasi-static and dynamic conditions to determine the various mechanical responses. STF appears to influence the mechanical behaviour of cork agglomerates by providing softer deceleration rates and dispersing more energy through disaggregation mechanisms.

Traumatic Brain Injury represents a significant public health concern due to its role in traumatic death and disability, often caused by head impacts or rapid accelerations. Despite advancements in Finite Element Head Models, existing models primarily represent adult males, neglecting anatomical and physiological differences between genders and age groups. Additionally, the mechanistic roles of specific intracranial tissues, such as the dura mater, have conventionally been overlooked. To better understand the mechanical behavior of the brain and its injured regions in the context of TBI, including the dura mater, this study proposes the development of a Female Finite Element Head Model. This model, representative of a middle-aged female subject, was developed using medical image-derived geometry and finite element modeling techniques. The validation results demonstrate a similarity between the numerical displacement curves and those obtained experimentally. In the model with dura mater, the numerical results show analogous behavior to the experimental results, despite minimal variations in the amplitude of the curves. These advancements highlight the significance of including the dura mater in biomechanical brain modeling. Incorporating the dura mater in Finite Element Head Models produces more realistic results than models without it. This emphasizes the importance of enhancing biomechanical models to better represent anatomical complexity.

A single paragraph of about 200 words maximum. For research articles, abstracts should give a pertinent overview of the work. We strongly encourage authors to use the following style of structured abstracts, but without headings: (1) Background: place the question addressed in a broad context and highlight the purpose of the study; (2) Methods: describe briefly the main methods or treatments applied; (3) Results: summarize the article’s main findings; (4) Conclusions: indicate the main conclusions or interpretations. The abstract should be an objective representation of the article, it must not contain results which are not presented and substantiated in the main text and should not exaggerate the main conclusions.

This work explored and contrasted the effect of microstructure on the tensile properties of AlSi10Mg alloys generated by transient directional solidification depending on variations in cooling rate and Magnesium (Mg) content (i.e., 0.45 and 1wt.% Mg), with a focus on understanding the dendritic growth and phases constitution. Optical and Scanning electron (SEM) microscopies, CALPHAD and thermal analysis were used to describe the microstructure, forming phases and resulting tensile properties. The findings showed that the experimental evolution of the primary dendritic spacing is very similar when both directionally solidified (DS) Al-10wt.% Si-0.45wt.% Mg and Al-10wt.% Si-1wt.% Mg alloys samples are compared. The secondary dendritic spacing was lower for the alloy with more Mg, especially considering the range of high growth velocities. Moreover, a greater fraction of (Al+Si+Mg2Si) ternary eutectic islands surrounding the -Al dendritic matrix was noted for the alloy with 1wt.% Mg. As a result of primary dendritic spacings greater than 180 m related to lower cooling rates, slightly higher tensile properties were attained for the Al-10wt.% Si-0.45wt.% Mg alloy. In contrast, combining dendritic refining (< 150 m) and larger Mg2Si fraction, fast solidified DS Al-10wt.% Si-1wt.% Mg samples exhibited higher tensile strength and elongation. The control of cooling rate and fineness of the dendritic array provided a new insight related to the addition of Mg in slightly higher levels than conventional ones, capable of achieving a better balance of tensile properties in AlSi10Mg alloys.

No-show appointments in healthcare is a problem faced by medical centers around the world, and understand the factors associated with the no-show behavior is essential. In the last decades, artificial intelligence took place in the medical field and machine learning algorithms can work as a efficient tool to understand the patients behavior and to achieve better medical appointment allocation in scheduling systems. In this work, we provide a systematic literature review (SLR) of machine learning techniques applied to no-show appointments aiming at establishing the current state-of-the-art. Based on a SLR following the Kitchenham methodology, 24 articles were found and analyzed, in which the characteristics of the database, algorithms and performance metrics of each studies were synthesized. Results regarding which factors have a higher impact on missed appointment rates were analyzed too. The results indicate that the most appropriate algorithms for building the models are decision tree algorithms. Furthermore, the most significant determinants of no-show were related to the patients age, whether the patient missed a previous appointment, and the distance between the appointment and the patients scheduling.

In Sub-Saharan Africa, despite poverty, chronic hunger and food insecurity, traditional eating has been related to positive health outcomes and sustainability. There is little health research on diet quality based on what African people consume. The defining characteristics of the traditional African cuisine are the richness in herbs and spices, fermented foods and beverages, and healthy and whole ingredients used. However, as countries in this region become more economically developed, there is a shift to “modern” occidental foods rich in saturated fats, sugar and sweeteners. As a result, there are increased incidences of previously unreported ailments due to unbalanced diet. The regular practice of infinite international aid to the region to curb food insecurity has been unsustainable, ineffective and with no end in sight. Local increase in production and productivity is imperative. Protein rich foods in dietary guidelines enhance only those of animal or plant sources while rich protein sources such of mushroom, has been absent in these charts. This article considers the valorisation of traditional African foods and the importance of establishing an African Food-Based Dietary Guidelines (AFBDGs), an unprecedented Food Pyramid, along with the added emphasis on the potential of African mushrooms, which may play a role in shielding Sub-Saharan Africans against the side-effects of a western stylish diet and promote health. It enhances the preventive role of mushrooms in viral diseases and other disorders.

Since World War I, the commercial aviation industry has seen many improvements that now allow people and goods to reach the other side of the world in few hours, consuming much less fuel than in recent decades. Improvements in cargo capacity and energy efficiency were significant and, in this scenario, commercial airlines were able to thrive and bring great benefits to world economy. However, this sector is facing environmental challenges due to the intensive use of aviation fuel. Brazil is one of the largest domestic air passenger markets in the world and still has great growth potential, considering its economic potential and territorial dimensions: roughly the same size as the US and twice the size of the European Union. This paper discusses partial productivity of jet fuel in Brazilian domestic aviation and proposes an econometric method to support public regulators and airlines decisions. The proposed model uses variables such as aircraft size, route characteristics and idle flight capacity in a panel data analysis. The results show that reducing idle capacity is one of the best ways to achieve better short-term fuel efficiency and therefore will reduce environmental impacts and have positive economic effects on commercial air transport activities.

Regional heterogeneity of microglia was first described a century ago by Pio del Rio Hortega. Currently, new hints on microglia heterogeneity across central nervous system (CNS) regions are still being unraveled by high-throughput techniques. It remains unclear whether these spatial specificities translate into different microglial behaviors in vitro. We cultured microglia isolated from the cortex and spinal cord and analyzed the effect of the CNS spatial source on in vitro behavior by applying the same experimental protocol and culture conditions. We analyzed microglial cell numbers, function, and morphology and found a distinctive in vitro phenotype. We found that microglia were present in higher numbers in spinal cord-derived glial cultures, presenting different expression of inflammatory genes and a lower phagocytosis rate under basal conditions or after activation with LPS and IFN-. Morphologically, cortical microglial cells are more complex and present longer ramifications, which were also observed in vivo in CX3CR1+/GFP transgenic reporter mice. Collectively, our data demonstrated that microglial behavior in vitro is defined according to specific spatial characteristics acquired in the tissue. Thus, our study highlights the importance of microglia as a source of CNS for in vitro studies.

Newcastle Disease (ND) remains a critical disease affecting poultry in sub-Saharan Africa. In some countries, repeated outbreaks have a major impact on local economies and food security. Recently, we developed an adenovirus-vectored vaccine encoding the Fusion protein from an Ethiopian isolate of Newcastle Disease Virus (NDV). The adenoviral vector was designed and a manufacturing process developed in the context of the Livestock Vaccine Innovation Fund initia-tive funded by the International Development Research Centre (IDRC) of Canada. The industrial-ly-relevant recombinant vaccine technology platform is being transferred to the National Veteri-nary Institute (Ethiopia) for veterinary applications. Here, we demonstrate that the instillation of the adenoviral vector through the nasal cavity can confer protection to chickens against a lethal challenge with NDV. A manufacturing process using HEK293 suspension cells cultured in stirred-tank bioreactor for the vaccine production is proposed. Taking into consideration supply chain limitations, options for serum-free media selection have been evaluated. A streamlined downstream process including a filtration, an ultrafiltration and a concentration step was de-veloped. With high volumetric yields (infectious titers up to 5 x 109 TCID50/mL) in the culture su-pernatant, the final formulations were prepared at 1010 TCID50/mL, either in liquid or lyophi-lized forms. The liquid formulation was suitable and safe for mucosal vaccination and was sta-ble for 1 week at 37˚C. Both liquid and lyophilized formulations were stable after 6 months of storage at 4˚C. Overall, a manufacturing process for adenovirus vectored vaccine was developed and protective doses were determined using a convenient route of delivery. Formulation and storage conditions were established, and quality control protocols were implemented.

A 3D graphene foam made of interconnected multilayer graphene flakes was produced on optical fibres (OF) by laser-induced transformation of a polyimide (PI) film coated on the OF cladding. This material, known as la-ser-induced graphene (LIG), was explored in the electrochemical detection and quantification of dopamine (DA) at physiologically relevant concentrations in the presence of the most relevant interfering molecules in biological fluids, ascorbic acid (AA) and uric acid (UA). The measured limit of detection is 100 nM, the linear range is 0.1 to 5 μM and a maximum sensitivity of 5.0 µA µM−1 cm−2 was obtained for LIG decorated with Pt nanoparticles (NPs). Moreover, immunity to AA and UA interference and to fouling was attained by decorating the LIG elec-trode with Pt NPs and coating with Nafion. These figures of merit underlines the potential of these sensors for the quantification of physiologically relevant concentrations of DA in biological fluids, paving the way for the development of hybrid electrochemical/optical sensing actuating platforms in a lab-on-fibre configuration, with relevant applications in biomedical engineering. The advantages of this hybrid arrangement include the possi-bility of in-situ counterproofing, extended measuring ranges, photoelectrochemical detection and the probing of inaccessible places. This elegant approach can also provide a simple and cost-effective way to fabricate biomed-ical devices with extended functionality, such as medical optical probes with added electrochemical capabilities, optogenetics combined with local electrochemical detection, among others.

The use of cobalt-iron (VaCoFe) core is investigated as an alternative to silicon-iron (FeSi) on the design of interior permanent magnet synchronous motors (IPMSM). A spoke-type IPMSM geometry is optimized considering FeSi and VaCoFe cores for a torque range up to 40 N.m, providing a general comparative analysis between materials, considering the application of a 4-motor competition vehicle’s powertrain. A genetic optimization algorithm is applied over a hybrid analytical/finite-element model of the motor to provide sufficiently accurate electromagnetic and thermal results within a feasible time. VaCoFe can result in an estimated increase of up to 5 % in efficiency for the same torque, or up to 64 % torque increase for the same efficiency level. After optimization, and using a detailed time-dependent model, a potential 3.2 % increase in efficiency, a core weight reduction of 4.1 %, and a decrease of 9.6 % in the motor’s core volume was found for the VaCoFe at 20 Nm. In addition, for the same motor volume, the VaCoFe allows an increase of 51.9 % of torque with an increase of 1.1 % of efficiency, when compared with FeSi.

The disastrous 2017 fire season in Portugal lead to widespread recognition of the need for a paradigm shift in forest and fire management. We focused our study on Alvares, a parish in central Portugal which had 60% of its area burned in 2017, with a large record of historical. We evaluated how different fuel treatment strategies can reduce wildfire hazard in Alvares, through i) a fuel break network with different priorities and ii) random fuel treatments resulting from stand-level management intensification. To assess this, we developed a stochastic fire simulation system (FUNC-SIM) that integrates uncertainties in fuel distribution over the landscape. If the landscape remains unchanged, Alvares will have large burn probabilities in the north, northeast, and center-east areas of the parish that are very often associated with high fire line intensities. The different fuel treatment scenarios decreased burned area between 12.1-31.2%, resulting from 1%-4.6% increases in annual treatment area, and reduced 10%-40% the likelihood of wildfires larger than 5000 ha. On average, simulated burned area decreased 0.22% per each ha treated, and effectiveness decreased with increasing area treated. Overall, both fuel treatment strategies effectively reduced wildfire hazard and should be part of a larger, holistic and integrated plan to reduce the vulnerability of the Alvares parish to wildfires.

Leishmaniases are zoonotic vector-borne diseases caused by a wide variety of Leishmania species with complex transmission cycles involving different reservoirs, potential new hosts and vectors. Similarly, to other eukaryotes, Leishmania release extracellular vesicles (LEVs) to play important initial interactions that are crucial to modulate the subsequent systemic immune response on the establishment of infection in humans and others hosts like dogs. Recent studies in endemic areas of Brazil concluded that canine infections were predominantly due to L. amazonensis and not restricted to L. infantum (syn. Leishmania chagasi). Under these premises, the diagnosis of leishmaniasis needs to be improved with the identification of current etiological agent and the histopathologic features, highlighting the differential diagnosis and the molecular components of LEVs. In this way, the dual aim of that study is to register collected observations of natural canine infections, enhancing the relevance of differential diagnosis in companion animals and inserting in vitro results in the field of LEVs that still research gaps to be filled to understand the mechanisms and biological aspects involving the parasite-host interactions. Therefore, improve these studies of Parasitology research is important for diagnostic, prognostic, treatment advances and continuing need for global prevention, control, elimination/eradication of these parasitic infections.

The giant challenge breeding flood-irrigated rice is to identify superior genotypes that present high-yielding with specific grain qualities, resistance to abiotic and biotic stresses, excellent adaptation to the target environment. Thus, the objectives of this study were to propose a bayesian multi-trait model, estimate genetic parameters, and select flood-irrigated rice genotypes with better genetic potentials in different evaluation environments. For this, twenty-five rice genotypes belonging to the flood-irrigated rice improvement program were evaluated. The grain yields, grain length, width and thickness, grain length, and grain width and weight of 100 grains in the agricultural year 2016/2017. The experimental design used in all experiments was a randomized block design with three replications. The Monte Carlo Markov Chain algorithm estimated genetic parameters and genetic values. The grain thickness trait was considered highly heritable, with a credibility interval ranging from: h^2: 0.9480; 0.9440; 0.8610, in environments 1, 2, and 3, respectively. The grain yields showed a low correlation estimate between grain thickness and 100-grain weight, in all environments, with a credibility interval ranging from (ρ= 0.5477; 0.5762; 0.5618 and 0.5973; 0.5247; 0.5632, grain thickness and 100-grain weight, in environments 1, 2, and 3, respectively). The Bayesian multi-trait model proved to be an adequate strategy for the genetic improvement of flood-irrigated. Genotypes 2 and 15 had similar potential in the three environments, they should be selected as high-performance multi-trait genotypes for the genetic breeding of flood-irrigated rice in the program.

This study reports the development of a numerical method to simulate two-phase flows of Newtonian fluids that are incompressible, immiscible, and isothermal. The interface in the simulation was located and reconstructed using the geometric volume of fluid (VOF) method. The implementation of the Piecewise-Linear Interface Calculation (PLIC) scheme of the VOF method was performed to solve the three-dimensional (3D) interface transport during the dynamics of two-phase flows. In this method, the interface is approximated by a line segment in each interfacial cell. The balance of forces at the interface was accounted for using the continuum interfacial force (CSF) model. To solve the Navier-Stokes equations, meshless finite difference schemes from the HiG-Flow computational fluid dynamics software were employed. The 3D PLIC-VOF HiG-Flow algorithm was used to simulate several benchmark two-phase flows for the purpose of validating the numerical implementation. First, the performance of the PLIC implementation was evaluated by conducting two standard advection numerical tests: the 3D shearing flow test and the 3D deforming field test. Good agreement is obtained for the 3D interface shape using both the 3D PLIC-VOF HiG-Flow algorithm and those found on the scientific literature. In addition, the absolute error of the volume tracking advection calculation obtained by our 3D PLIC-VOF HiG-Flow algorithm was found to be smaller than the one found in the scientific literature for both the 3D shearing and 3D deforming flow tests. Lastly, the 3D bubble rising problem was simulated for different fluid densities and viscosity’s ratios. Again, good agreement is obtained for the 3D interface shape using both the newly implemented algorithm and the OpenFOAM, DROPS and NaSt3D software. The bubble’s rise velocity and evolution of the bubble’s center of mass is also computed with the 3D PLIC-VOF HiG-Flow algorithm and found to be in agreement with these software.

The ethanol extract (EE) prepared from the leaves of Tibouchina granulosa, and its fraction in ethyl acetate (fEA) were evaluated concerning their capacity to reduce inflammation in different experimental models. fEA was also studied concerning its chemical constituents. EE and fEA were assayed for their anti-inflammatory potential, using formalin-induced licking behaviour and carrageenan-induced inflammation into the subcutaneous air pouch (SAP) models. Reduction in polymorphonuclear cells (PMN) activation was performed in freshly isolated PMN. Chromatographic analysis of fEA was done by HPLC. Hispiduloside was isolated as the main constituent in fEA and its quantity was estimated to be 11.75% in fEA, 3.05% in EE, and 0.2% (w/w) in the plant. EE (30 mg/kg) significantly reduced the second phase of formalin-induced licking. fEA demonstrated a reduction in leukocyte migration into the SAP. EE and fEA drastically reduced cytokines (TNF-α, IL-1β, and IFN-γ), nitric oxide (NO) production, in vitro PMN migration induced by C5a and IL-8, and TNF-α and IL-1β gene expression. Taken together our data indicate that either ethanol extract or its fEA fraction from leaves of T. granulosa present an anti-inflammatory effect contributing to the pharmacological and chemical knowledge of this species and confirming the rationale behind its traditional use.

Alheira is a naturally fermented meat sausage traditionally made in the Portuguese region of Trás-os-Montes. Lactic Acid Bacteria (LAB) have been found to be the dominant microorganisms in alheira. This study aimed: 1) to characterize technological features and in vitro antimicrobial activity of LAB isolates; and 2) to reveal associations between such phenotypic characteristics and the isolates genotypically identified to species level through amplification and sequencing of the 16S ribosomal gene. Sixty-two LAB isolates were identified and Enterococcus faecium was the most prevalent (32.3%), followed by Leuconostoc mesenteroides (19.4%) and Latilactobacillus sakei (17.7%), aligning with previous research on traditional Portuguese fermented meat sausages. The phenotypic analysis of LAB isolates indicated diverse acidification capacities, proteolytic activities, and inhibitory effects against foodborne pathogens. Comprising the technological attributes, L. paracasei and L. mesenteroides had higher proteolytic activity (3.46 and 3.43 mm), whereas E. faecium and L. paracasei stood out for their acidifying capacity, with mean pH after 6 h of 5.78 and 6.03, respectively. Overall, lactobacilli presented higher inhibition diameter against the pathogens Staphylococcus aureus, Listeria monocytogenes and Salmonella Typhimurium. Although the mechanisms for inhibition of pathogen growth needs to be further elucidated, these findings enhance our understanding of LAB diversity and functionality in alheira sausages, contributing to product safety and quality assessment.

The classification of goods involved in international trade in Brazil is based on the Mercosur Common Nomenclature (NCM). The classification of these goods represents a real challenge due to the complexity involved in assigning the correct category codes especially considering the legal and fiscal implications of misclassification. This work focuses on the training of a classifier based on Bidirectional En-coder Representations from Transformers (BERT) for the tax classification of goods with NCM codes. In particular, this article presents results from using a specific Portuguese Language tuned BERT model as well results from using a Multilingual BERT. Experimental results justify the use of these models in the classification process and also that the language specific model has a slightly better performance.

Cirrhosis is a chronic disease with multiple etiologies, multiple manifestations, and multi-organ involvement. Affects about 200 million people worldwide. Its main complication is Portal hypertension (PHT). Cirrhotic cardiomyopathy is a consequence of PHT, with heart failure (HF) being the main manifestation. On the other hand, for people with cardiopathy due to other reasons beyond cirrhosis, the presence of the last could act as a trigger to acute HF. Finally, when HF and cirrhosis coexist, the renal system suffers the most, originating from type-5 cardio-renal syndrome, a complex entity with many challenges in diagnosis and treatment. This entity was recently defined and there is a lack of data on the epidemiology of this syndrome. A 77-year-old woman, with cardiovascular risk factors; heart failure with reduced ejection fraction (HFrEF), secondary ischemic and valvular cardiopathy, chronic Kidney disease (CKD), and stable decompensated cirrhosis, went to the emergency department after progressive abdominal perimeter augmentation, legs’ edema and hematochezia. It was assumed acute decompensated cirrhosis and acute decompensated chronic kidney disease, had triggered digestive bleeding and the patient stayed hospitalized. Intravenous diuretic therapy was started but, the ascites and kidney function got worse, the Nt pro-BNP grew until 1125000 pg/ml, and a transthoracic echocardiography showed important signs of congestion, isolated right ventricular dysfunction, with normal cardiac output. After teamwork’s discussion, a type-5 cardio-renal syndrome was assumed deciding not to act on tricuspid regurgitation due to the maladaptive RV remodeling. Hepatorenal syndrome treatment was begun (oral terlipressin and intravenous albumin), followed by decongestion therapy, resulting in a marked improvement in clinical presentation. The kidney, heart, and liver recovered to these basal states. With this clinical case, the authors want to show how multidisciplinary management is important to face tricuspid regurgitation and right ventricular dysfunction.

Electronic devices are sensitive to electromagnetic (EM) emissions requiring electromagnetic shielding protection to assure good operation, preventing noise, malfunctioning, or even burning. To assure protection, it is important to develop suitable material and design solutions for electronic enclosures. Most common enclosures are made with metal alloys by traditional manufacturing methods. However, resourcing to thermoplastic composites combined with additive manufac-turing (AM) technologies emerges as an alternative that enables to fabricate complex parts that are lightweight, consolidated and oxidation and corrosion resistant. In this research, an AM technique based in material extrusion was used to print 2 mm thick specimens with a multi-material made of micro-carbon fiber (CF) filled polyamide, reinforced, at specific layers, by continuous carbon fibers stacked with a 90° rotation to each other. Specimens electromagnetic shielding effectiveness (EMSE) was evaluated in the frequency band of 0.03 – 3 GHz by coaxial transmission line method. De-pending on the number of CF layers, the EM shielding obtained can up to 70 dB, with a specific shielding up to 60 dB.cm3/g, predominantly by absorption mechanism, being 22 times higher that without the CF layers. These findings fundament this innovative approach for lightweight cus-tomizable solutions for EM shielding applications.

In the recent years, tubular nanostructures have been related with immense advances in various fields of science and technology. Considerable research efforts have been centered on the theoretical prediction and manufacturing of non-carbon nanotubes (NTs), which meet modern requirements for the developing of novel devices and systems. In this context, diatomic inorganic nanotubes formed by atoms of elements from the 13th group of the periodic table (B, Al, Ga, In, Tl) and nitrogen (N), have received much research attention. In the present work, the elastic properties of single-walled boron nitride, aluminium nitride, gallium nitride, indium nitride and thallium nitride nanotubes were numerically evaluated using the nanoscale continuum modelling approach (also called molecular structural mechanics). The elastic properties (rigidities, surface Young´s and shear moduli, and Poisson´s ratio) of nitride nanotubes are discussed with respect to the bond length of the corresponding diatomic hexagonal lattice. The results obtained contribute to a better understanding of the mechanical response of nitride compound-based nanotubes, covering a broad range from the well-studied boron nitride NTs to the hypothetical thallium nitride NTs.

The success of Toxoplasma gondii (intracellular parasite) host cell invasion relies on the apical complex, a specialized microtubule cytoskeleton structure associated with secretory organelles. The genome encodes three isoforms of both α- and β-tubulin which are altered by specific post-translational modifications (PTMs), changing the biochemical/biophysical proprieties of microtubules, and modulating their interaction with associated proteins. Tubulin PTMs are a powerful and evolutionarily conserved mechanism to generate tubulin diversity, forming a biochemical ‘tubulin code’ that can be ‘read’ by microtubule-interacting factors. The T. gondii tubulin PTMs are: α-tubulin acetylation, α-tubulin detyrosination, Δ5α-tubulin, Δ2α-tubulin, α- and β-tubulin polyglutamylation, and α- and α-tubulin methylation. Tubulin glutamylation is a key candidate to assist microtubule remodeling in Toxoplasma, being involved in the regulation of microtubule stability, dynamics, interaction with motor proteins, and severing enzymes. The correct balance of tubulin glutamylation is achieved by the coordinated action of polyglutamylases and deglutamylating enzymes. In this work we will review and discuss the current knowledge on T. gondii tubulin glutamylation. By in silico identification of mammalian protein orthologs we explored and updated the identification of putative proteins related to glutamylation, contributing to a better understanding of the role of tubulin glutamylation in T. gondii.