Despite the overall extension of the Amazon basin (approximately 6,000,000),which encompasses such a complex ecosystem and territories belonging to seven different nations, it is worth mentioning that environmental assessment related to changes in land use and land cover (LULC) in this region are often conducted respecting geopolitical boundaries associated with each country or taking into account the so-called Amazon biome. With the purpose of prospecting the intricate and hidden hydrological patterns, we undertake an in-depth evaluation of the water balance along the 2001-2021 time span across the whole basin, whose behavior depends on the features deriving from the metamorphoses in land use and land cover. To accomplish that task, the influence of the components of the water balance, namely rainfall and evapotranspiration, jointly with the terrestrial topographic mapping, are examined to investigate the interactions among the physical mechanisms that make up the hydrological cycle and the corresponding physical hydrological processes triggered by deforestation and reforestation in the region. More specifically, the modeling approach was rigorously designed to also consider, separately or not Negro, Solimões, Madeira, Tapajós and Xingu hydrographic sub-basins, which are the most important ones of the Amazon basin. The results highlight that, in the southern region of the Amazon, specifically within the Madeira river sub-basin, the lowest forest coverage is observed (56.0%), whereas in the northern Negro river sub-basin, the most notable forest coverage is observed (85.0%).The most preserved forest areas, such as the Negro and Solimões river sub-basins, with percentages of 81.9% and 74.2%, respectively, have higher annual rates of precipitation and evapotranspiration over time. On the other hand, regions that suffered the most intense deforestation along the time period studied, such as the Madeira, Tapajós and Xingu sub-basins, have lower annual rates of precipitation and evapotranspiration, with a preservation percentage of 54.6%, 62.6% and 70, 7%, respectively. As the pace of deforestation slowed between 2003 and 2013, annual precipitation rates increased by 12.0%, while evapotranspiration decreased by 2.0%. The hydrological findings of this paper highlight th predominant role of the forest in the context of the global water balance of the Amazon basin and the potential to also produce distinct impacts within different parts of the basin in terms of having more or less rainfall and evaporation. In addition, those variabilities in the hydrological operational components and mechanisms due to changes in land cover and land use also reveals the potential impacts that could be expected in the surrounding areas, closer or farther, notably beyond the limits of the Amazon basin.

(1) Background/Objectives: Accurate determination of chronological age is crucial in legal dental identification. This study aimed to compare the effectiveness of different formulas in estimating the age of a Brazilian subpopulation by analyzing the pulp/tooth ratio of the maxillary canine and mandibular second premolar in panoramic and periapical radiographs. (2) Methods: The sample consisted of panoramic and periapical radiographs of 247 individuals. The file of each radiograph was opened in the Adobe Photoshop CS4® program to outline and obtain values in pixels for calculating the pulp/tooth ratio. Statistical analysis was conducted using the SPSS program, with a significance level set at 5%. (3) Results: The interclass correlation coefficient demonstrated excellent intra-observer agreement (0.990 – 0.999). The determination coefficients (R2) suggested that only 30-35% of the actual age results could be explained by the pulp/tooth ratio. Smallest differences were observed with Cameriere's formula for the mandibular second premolar on panoramic radiographs (+4.1 years). The greatest differences were found with the formulas for the mandibular second premolar in panoramic radiographs of the Korean (+12.5 years) and Portuguese (-12.1 years) populations. (4) Conclusions: The equations employed allowed for estimating the age of a Brazilian subpopulation and showed little agreement between the actual age and the estimated age.

Ménière's disease (MD) has an unclear cause. The microvascular dysregulation of the inner ear has been increasingly pointed as a potential contributor. This study investigates the prevalence of cardiovascular risk factors (CVRFs) in MD patients compared to those with posterior circulation cerebral infarction (POCI). CVRFs like hypertension, diabetes, dyslipidemia, obesity, coronary heart disease, and smoking were assessed in both MD and POCI patients. Brain MRI identified POCI etiology as "small vessel occlusion" (SVO) or "other etiology" (OE). The study included 64 MD and 84 POCI patients. Compared to MD, POCI OE showed a higher prevalence of CVRFs across various age groups, including hypertension, diabetes, dyslipidemia, and smoking. Notably, the odds of having POCI OE were significantly higher for individuals with hypertension and smoking. On the other hand, POCI SVO showed similar prevalence of CVRFs compared to MD. This study reveals no significant difference in CVRF prevalence between MD and smaller vessel POCI. However, a clear distinction emerges when comparing MD to POCI with involvement of larger blood vessels. Further research is needed to confirm these findings and explore potential shared risk factors between POCI (SVO) and MD.

This study evaluated the hip joints of the giant anteater (Myrmecophaga tridactyla) through imaging and macroscopic analyses and proposed a surgical approach for arthrotomy procedures in this species. The study used four samples fixed in 10% formaldehyde and six thawed carcasses. Radiographic and ultrasound examinations and anatomical dissection allowed the proposal of a surgical approach for the hip joint. The radiographic evaluation occurred with frog-legged ventrodorsal and lateral projections, and the ultrasound enabled joint soft tissue assessment. The articular elements represented similar characteristics to other domestic species. Some anatomical particularities of muscle groups were the intermuscular septum between the tensor fasciae latae and superficial gluteus muscles at the level of the greater trochanter of the femur, which provides lateral access to the femoral head and neck more conservatively. In conclusion, the anatomical particularities of radiographic positioning, the clinical applications of joint ultrasound, and the arrangement of muscle groups must be considered when evaluating and surgically accessing the hip joint of the giant anteater.

Sleep is of vital necessity for health, it has a restorative and protective function for children and adolescents with chronic conditions and their families. The purpose was to identify the scientific production on sleep patterns in children and adolescents with chronic conditions and their families. This integrative review was developed in March and June 2022, of the MEDLINE, Web of Science, CINAHL and PSYCInfo. The articles included were original papers published be-tween January 2007 and mid-2022. Excluded were review studies that did not evaluate sleep and whose participants did not have chronic conditions or were not children, adolescents and/or their families. The searches returned 814 abstracts. After exclusions, 47 studies were selected to be read in full; of these, 29 were selected and were grouped empirically into four categories: major alterations in sleep patterns of children and adolescents with chronic conditions; the relationship between sleep disorders and symptoms in children and adolescents with chronic conditions; impaired sleep patterns of families of children and adolescents with chronic conditions; sleep alterations and their relationship with other problems in families of children and adolescents with chronic conditions. All studies showed sleep pattern impairment in children and adolescents with chronic conditions and their families.

This manuscript employs a surface stress-driven nonlocal model to explore the combined effects of long-range interaction and surface energy on higher vibration modes of functionally graded nanobeams. The nanobeam theory, based on Bernoulli-Euler kinematics, incorporates surface effects such as surface elasticity, surface residual stresses, surface density, and rotary inertia. Hamilton's principle is applied to derive the governing equation with size-dependent considerations. The main outcomes of a parametric investigation, considering four different kinematic boundary conditions (Cantilever, Simply-Supported, Clamped-Pinned, and Doubly-Clamped) while varying the nonlocal parameter and material gradient index, are presented and discussed. Additionally, the normalized natural frequencies for the second, third, fourth and fifth modes of vibrations are provided and analyzed for each case under study. The results underscore the model's effectiveness in capturing surface energy effects on the overall dynamic behavior of functionally graded Bernoulli-Euler nanobeams, offering a cost-effective approach for designing and optimizing nano-scaled structures.

The coffee industry loses millions of dollars annually worldwide due to the Coffee Berry Borer (CBB); these losses imply a decrease in quality and production. Traps are used to monitor their flight and for pest control. The main objective was to determine the flight pattern and trap capture percentages of the CBB population over time using column traps (CTs) in two independent field experiments. CTs were composed of four traps installed at four different heights 0.5, 1.5, 2.5, and 3.5m above ground. Our results demonstrated a significant difference in CBB capture by traps placed at different heights above the ground. The CT capture maintained a pattern throughout this study's lag; the lower the height, the greater the percentage of CBBs captured. In Experiments A and B, the traps placed at 0.5m caught 67% and 85% of the CBBs captured, respectively. Furthermore, the trap set at 1.5m above the ground in the multi-level CT showed a higher capture percentage than the individually placed trap (also at 1.5m). The pattern of the capture and proportion of the CBB in the CTs were maintained throughout the study despite the season, changes in temperature, and relative air humidity. We suggested that CTs could be explored as a useful tool for capturing the CBB, considering its monitoring and management.

Infrared thermography has already been proven to be a significant method in non-destructive evaluation since it gives information with immediacy, rapidity and low cost. However, the thorniest issue for wider application of IRT is the quantification. In this work, we proposed a specific depth quantifying technique by employing the Gated Recurrent Units (GRU) in composite material samples via pulsed thermography (PT). Carbon Fiber Reinforced Polymer(CFRP) embedded with flat bottom holes were designed via Finite Element Method (FEM) modeling in order to precisely control the depth and geometrics of the defects. The GRU model automatically quantified the depth of defects presented in the CFRP material. The proposed method evaluated the accuracy and performance of synthetic CFRP data from FEM for defect depth predictions.

There is a need for alternatives or complements to synthetic fertilizers to enhance agricultural sustainability. Applying organic amendments can play a significant role in this. Insect droppings show high potential, though studies evaluating their agronomic value have only recently begun to emerge. This study compared black soldier fly (Hermetia illucens) and mealworm (Tenebrio molitor) larvae frass with another organic amendment (Nutrimais) derived from composting forestry, agro-industrial, and domestic waste. The experiment also included ammonium nitrate at two rates [the same as the organic amendments, 50 kg ha–1 nitrogen (N) (FullR), and half that rate (HalfR)] and an unfertilized control. The study spanned two growth cycles of lettuce (Lactuca sativa L.) grown in pots, followed by unfertilized oats (Avena sativa L.) to assess the residual effects of the fertilizing treatments. Mealworm larvae frass mineralized rapidly, with an apparent N recovery of 37.4% over the two lettuce growth cycles, indicating its high availability to soil heterotrophic microorganisms. The average dry matter yield (DMY) of lettuce was the highest among all treatments (12.8 and 9.8 g plant–1 in the first and second lettuce cycles), even compared to the FullR treatment (12.2 and 7.8 g plant–1), though without significant differences. Although mealworm larvae frass exhibited a high mineralization rate, the DMY cannot be attributed solely to N supply, as plants in the FullR treatment showed better N nutritional status. Mealworm larvae frass provided strong evidence of a plant biostimulant effect, not explained by the variables measured in this study. Black soldier fly larvae frass exhibited typical behavior of a moderately reactive organic amendment, while Nutrimais showed low reactivity, with a near-neutral mineralization/immobilization balance. The results suggest mealworm larvae frass is recommended for early maturing vegetable crops, whereas Nutrimais appears more suitable for perennial crops with low short-term nutrient requirements.

Baía de Todos os Santos is the second largest bay in Brazil and is home to important ecosystems, including estuarine systems and mangroves. However, studies on the seasonal variability of its soil properties and composition are still scarce. For this study, soil and leaf samples were seasonally collected from mangrove forests at four sites (Cacha Prego, Ponta Grossa, Ilha de Maré, and Pitinga), which are representative of different environmental conditions within the BTS. Soil physicochemical properties, soil composition and partition of Fe forms were determined, and analysis of minerals by Scanning Electron Microscope, was performed on soil samples. Isotopic ratios (δ13C, δ15N) were also determined on soil and leaf samples. Soils showed significant spatial and temporal changes affecting both their properties (pH, Eh) and their composition (TOC, pyrite and Fe oxyhydroxide contents). Clear spatial changes were observed in redox potential, significantly affecting the concentrations of the different geochemical forms of Fe, particularly the concentrations of crystalline oxyhydroxydes and pyrite in one of the studied sites. In three of the study sites, pyrite crystals showed clear evidence of degradation associated with sandy soils. Finally, δ13C and N/C ratios in soils seem to suggest a mixed origin of organic matter.

About a decade ago, active optical crop canopy sensors are being used to manage in-season variable nitrogen (N) fertilization in cornfields to match the plant demand that occurs mid season, increasing the efficiency compared to broadcast N applications. There were also initiatives of using ultrasonic sensors to measure plant height on-the-go for N application and crop water demand estimation, but no studies have integrated the optical, ultrasonic and canopy temperature for crop water stress assessment. The objective of this chapter is to evaluate the crop water status using infrared thermometry integrated with optical and ultrasonic sensors. Specifics objectives are: (i) evaluate the corn canopy temperature under different previous crop, N rates and irrigation levels; (ii) test a procedure for water stress assessment in commercial cornfields using the integration of sensors, (iii) correlate plant based sensor measurements (N status, plant height and canopy temperature) with grain yield, soil attributes and detailed topographical features, and (iv) study the spatial dependence of canopy temperature. This study was conducted in one small plot study area and on three producer’s fields in 2010. The small plot experiment consisted of two irrigation levels (70 and 100% of evapotranspiration – ET), two previous crop schemes (corn after corn – CC and corn after soybeans – CS), and four N rates (0, 75, 150, 225 kg N ha^-1). Canopy temperature, optical reflectance and plant height was measured from R2 until R6 in the small plots. At the producer’s fields, three long strips across center pivots were used to have a non-limited N and water crop and then continuous georeferenced sensors measurements were taken during side-dress (V11 growth stage) in about 10 hectares in each field. In the small plot study the crop canopy temperature was influenced by the irrigation levels and N rates. The procedure proposed could be used to identify zones in the producer’s field where water stress can be a yield limiting factor other than N derived. Inside the zones considered that water stress played a major whole, there were low correlations between plant height, plant N status and canopy temperature, indicating that the canopy temperature had more influence from water stress than vegetation cover. Concave and lower elevation areas had higher yields compared to convex and high elevation, showing that the detailed elevation mapping can be beneficial to delineate stables zones that possibly could be used in variable irrigation systems. The spatial dependence of canopy temperature was over 65 meters across producers’ sites, showing that the commercial high clearance applicator’s swath width was adequate to obtain accurate maps. The integration of plant N status, plant height and canopy temperature was beneficial to detect water stressed zones in the field. Opportunities can be foresee also for on-the-go N fertilization using integration of these sensors because is likely that water stress can be confounded with different N supply during the growing season and in different zones in the field.

Melt mixing is a convenient method to prepare polymer nanocomposites, but the extent of the dispersion of the solid filler reached is often limited, and may compromise the anticipated performance of these materials during service. Since the efficiency of extensional flows on dispersion is now well recognized, several mixers were designed with the aim of inducing both shear and extensional flow components. This work combines experimental and numerical data to better understand the kinetics of the dispersion of graphite nanoplates in a polypropylene melt, using a mixing device that consists of a series of stacked rings with equal outer diameter and alternating larger and smaller inner diameters, thus creating a series of converging/diverging flows. Numerical simulation of the flow using the opensource OpenFOAM software assuming both inelastic and viscoelastic responses predicted the velocity, streamlines, flow type and shear and normal stress fields for the mixer. Experimental and computed data were combined to determine the trade-off between the local degree of dispersion of the PP/GnP nanocomposite, measured as Area ratio, and the absolute average value of the hydrodynamic stresses multiplied by the local cumulative residence time. From considerations based on a theoretical approach to dispersion, the cohesive strength of the GnP agglomerates studied was estimated to be in the range 3 - 10kPa.

The increasing popularity of porphyrins and hydroporphyrins for application in a variety of biomedical (photodynamic therapy, fluorescence tagging and imaging, photoacoustic imaging) and technical (chemosensing, catalysis, light harvesting) applications is also associated with the growing number of methodologies that enable their solubilization in aqueous media. Natively, the vast majority of synthetic porphyrinic compounds are not water-soluble. Moreover, any water-solubility imposes several restrictions on the synthetic chemist on when to install solubilizing groups in the synthetic sequence, and how to isolate and purify these compounds. This review summarizes the chemical modifications to render synthetic porphyrins water-soluble, with a focus on the work since 2000. Where available, practical data such as solubility, indicators for the degree of aggregation, and special notes for the practicioner are listed. We hope that this review will guide synthetic chemists through the many strategies known to make porphyrins and hydroporphyrins water soluble.

The saturation properties of symmetric and asymmetric nuclear matter have been computed using the finite range simple effective interaction having Yukawa form-factor. The results of higher order derivatives of the energy per particle and the symmetry energy computed at saturation, namely, Q0, Ksym, Kτ, Qsym, are compared with the corresponding range of values extracted from studies involving theory, experiment and astrophysical observations. The ability of the equations of state computed with this simple effective interaction in predicting the threshold mass for prompt collapse in binary neutron star merger and gravitational redshift have been examined in terms of the compactness of the neutron star and the incompressibility at the central density of the maximum mass star. The correlations existing between neutron star properties with the nuclear matter saturation properties have been analyzed and compared with the predictions of other model calculations.

Background: Hospital accreditation has become ubiquitous in developing countries. Although studies recognize that accreditation can improve healthcare quality, efficiency, and safety, there are doubts about how hospitals deal with conflicts caused by the different institutional logics that inhabit this process. Therefore, this study aimed to investigate how professional and market logics, as well as the conflict between institutional demands, affect compliance with hospital accreditation. Methods: To this end, we developed a multiple case study in four Brazilian hospitals through in-depth interviews with sixteen participants (managers, physicians, nurses, physiotherapist) and on-site observation by the triangulation between the analysis of the narratives and the results of the multiple correspondence analysis. The interpretation and subsequent categorization of the interviews were guided by the study's analytical categories: institutional logics (professional and market); adoption objectives (legitimacy and efficiency); strategic responses to adoption (conformity, non-conformity, and customization); nature of demands (origin in the means and in goal). Results. The data showed that when professional logic is prominent, there is a greater tendency to customize activities, as there are conflicts in the means by which activities can be developed. When market logic stands out, there is a risk of non-conformity, mainly because the focus falls exclusively on goals. Finally, the data point to the absence of conflicts between justifications related to efficiency and legitimacy. Conclusion. We conclude the study by highlighting the theoretical and practical implications of recognizing the conflict between logics, contributing to a deeper understanding of how logic influences the attention given to specific demands and, more significantly, how they affect compliance with hospital accreditation standards, expanding the body of knowledge in the area.

This note applies the Logistic model approximation to determine the suitable start and end dates for the observed epidemic curves in the total number of cases for different countries. The Logistic model is presented and explicit relations for the beginning and end dates are obtained together with the total epidemic duration. Using data from Brazil, Germany, Italy, and South Korea, the extreme dates are calculated. Since the epidemic onset time is found, a fair comparison of the epidemic curve for these countries is obtained. The result does not depend on the poor statistics available in the early phase of the epidemic when the initial number of infectives is unknown. In fact, the total duration depends only on the characteristic time parameter of the LM model.

One of the operational challenges for the use of bentonite pellets as a sealing material in the abandonment of offshore fields consists in their disposition inside the well. This study aims to analyze the interaction of fluid media, consisting of saline solutions (NaCl, CaCl2 and KCl) and organic compounds (diesel, glycerin and olefin), with bentonite pellets, aiming its application as displacement fluid in offshore oil well abandonment operations. The physical integrity of the bentonite pellets in contact with the fluids was verified through visual inspections and dispersibility tests. Linear swelling tests were also performed to evaluate the potential for swelling of pellets in deionized water after contact with the fluid media. The results indicated that NaCl, CaCl2 and KCl solutions completely compromise the physical integrity of the pellets, while diesel and olefin showed the best responses regarding the structural preservation. Futhermore, the linear swelling tests showed that, even after the contact with diesel and olefin for 1 hour, bentonite pellets have reached a total swelling in water of 78%, after 24 hours. In this way, diesel and olefin proved to be highly promising alternatives to be used as displacement fluids for bentonite pellets in wells to be abandoned in a submarine environment.

The purpose of this project is to develop and build an extensible fixture. This fixture is ideal to milling, drilling, and shaping operations. Jigs and fittings are often the most cost-effective methods of mass fabricating a component. As a result, jigs and fittings are used and play a vital part in the mass production system. These are specialist work holding and tool-guiding devices. The quality of jigs and fixtures used in a process has a substantial impact on its performance. A fixture is distinctive because it is meant to fit a given area or shape. The basic purpose of a fixture is to find and, in certain instances, hold a workpiece throughout an operation. A jig differs from a fixture in that it leads the tool to the right position or movement during an operation, in addition to locating and supporting the workpiece. When a key is reproduced, the original key serves as a base for the path reader, which regulates the tool's movement to construct the duplicate key. In this situation, a CWC machine's route reader works as a jig, with the original being referred to as the template. Sometimes the template and jig refer to the same part of a production system.

Edible oils have commercial and nutritional value due to the presence of essential fatty acids. They can be consumed fresh in the form of capsules known as nutraceuticals. The quality of such products is of interest to the consumer. In this context, this study describes a method based on high resolution nuclear magnetic resonance (NMR) and Fourier transform mid-infrared spectroscopic analysis (FTIR), combined with statistical analyzes to differentiate different edible oils used as nutraceuticals in Brazil by fatty acid content. Through the analysis of 1H NMR spectra, the levels of saturated and unsaturated fatty acids in edible oils were characterized and quantified. Statistical analysis of the data confirmed the real distinction between nutraceutical raw materials, with emphasis on ω-9, ω-6 and ω-3 fatty acids. The analytical approach presented also demonstrated potential to identify the origin (animal or vegetable) of edible oils used as nutraceuticals.

The Gram-negative, strictly anaerobic bacterium Megasphaera elsdenii was first isolated from the rumen in 1953 and is common in the mammalian gastrointestinal tract. Its ability to use either lactate or glucose as its major energy source for growth has been well documented, although it can also ferment amino acids to ammonia and branched-chain fatty acids, which are growth factors for other bacteria. The ruminal abundance of M. elsdenii usually increases in animals fed grain-based diets due to its ability to use lactate (the product of rapid ruminal sugar fermentation), especially at low ruminal pH (< 5.5). M. elsdenii has been proposed as a potential dietary probiotic to prevent ruminal acidosis in feedlot cattle and high-producing dairy cows. However, this bacterium has also been associated with milk fat depression (MFD) in dairy cows, although proving a causative role has remained elusive. This review summarizes the unique physiology of this intriguing bacterium, and its role of in ruminal community function and in the health and productivity of the host animal. In addition to its effects in the rumen, the ability of M. elsdenii to produce C2-C7 carboxylic acids – potential precursors for industrial fuel and chemical production, is examined.

Quantum correlations, especially time correlations, are crucial in ghost imaging in order to significantly reduce the background noise on the one hand while increasing the imaging resolution. Moreover, the time correlations serve as a critical reference, distinguishing between signal and noise, which in turn enable clear visualization of biological samples. Quantum imaging also addresses the challenge involved in imaging delicate biological structures with minimal photon exposure and sample damage. Here we explore the recent progress in quantum correlation-based imaging, notably its impact on secure imaging and remote sensing protocols as well as on biological imaging. We also exploit the quantum characteristics of heralded single-photon sources (HSPS) combined with decoy-state methods for secure imaging. This method uses Quantum Key Distribution (QKD) principles to reduce measurement uncertainties and protect data integrity. It is highly effective in low-photon-number regimes for producing high-quality, noise-reduced images. The versatility of decoy-state methods with WCSs (WCS) is also discussed, highlighting their suitability for scenarios requiring higher photon numbers. We emphasize the dual advantages of these techniques: improving image quality through noise reduction and enhancing data security with quantum encryption, suggesting significant potential for quantum imaging in various applications, from delicate biological imaging to secure quantum communication.

Sentiment analysis to characterize properties of Bitcoin prices and their forecasting is here developed thanks to the capability of the Fuzzy transform to capture stylized facts and mutual connections between time series having different nature. Six years of daily Bitcoin Prices and Google Trends are analyzed in order to establish new perspectives in the management of their dynamics.

In the semi-arid region of Brazil, it is common to use saline or brackish water for crop production. However, this practice can negatively affect the soil, nutrient balance, and fruit quality and production. From this perspective, this study aimed to evaluate the effect of fertilization combinations with nitrogen (N), phosphorus (P), and potassium (K) on the production and quality of West Indian cherry grown under salt stress in the second year of production. The study was conducted in a protected environment following a randomized block design with treatments distributed in a 2 x 10 factorial arrangement referring to two levels of electrical conductivity of irrigation water (ECw) (0.6 and 4.0 dS m-1) and 10 NPK fertilization combinations (80-100-100; 100-100-100; 120-100-100; 140-100-100; 100-80-100; 100-120-100; 100-140-100; 100-100-80; 100-100-120 e 100-100-140% of the recommendation in the second year of production), with three replicates and one plant per lysimeter. The results indicate that irrigation of West Indian cherry crop irrigation at the water salinity of 4.0 dS m-1 negatively affected all fruit production variables. The interaction between the ECw of 0.6 dS m-1 and the 100-80-120 NPK fertilization combination increased the total number of fruits and the total fruit weight of West Indian cherry.

A large amount of data is produced every day by stakeholders of the Air Traffic Management (ATM) system, in particular airline operators, airports, and air navigation service provider (ANSP). Most data is kept private for many reasons, including commercial and security concerns. More than data, shared information is precious, as it leverages intelligent decision-making support tools designed to smooth daily operations. We present a framework to detect, identify and characterise anomalies in past aircraft trajectory data. It is based on an open source of ADS-B based aircraft trajectories, and extracted information can benefit a wide range of stakeholders: Air Traffic Control (ATC) training centres could play more realistic simulations; ANSP may improve capacity indicators; academics improve safety models and risk estimations; and commercial stakeholders, like airlines and airports, may use such information to improve short-term predictions and optimise their operations. The technique is based on autoencoding artificial neural networks applied on flows of trajectories, which provide a useful reading grid associating cluster analysis with quantified level of abnormality. In particular, we find that the highest anomaly scores correspond to poor weather conditions, whereas anomalies with a lower score relate to ATC tactical actions.

This study aims to evaluate how the operational procedure adopted for the pellets placement and the exposure to subsurface conditions influences the mechanical integrity of bentonite plugs used as barrier elements in the abandonment of petroleum wells. To this end, two methodologies were used to obtain the plugs: from the first methodology, the pellets were immersed in diesel or olefin, which are proposed as displacement fluids in offshore operations, and then, hydrated in deionized water; in the second methodology, representative of onshore operations, the pellets were directly hydrated in deionized water. After that, the plugs were tested by compression and adhesion tests. These mechanical tests were also carried out for test specimens obtained from plugs exposed to four formulations of synthetic formation waters. The results obtained demonstrated that the previous contact with olefin adversely affects the mechanical stability of bentonite plugs, while plugs formed from pellets immersed in diesel presented satisfactory mechanical properties. The mechanical properties of onshore plugs attested the highly successful performance of these elements, once its compressive strength was minimally impacted by exposure to formation waters and more pronounced reductions were observed only in the adhesion properties after the contact with higher salinity formation waters.

The inclusion of scientific journals in prestigious indexers is often associated with higher citation rates; journals included in such indexers are significantly more acknowledged than those that are not included in them. This phenomenon refers to the Matthew effect on journal citations, according to which, journals in exclusive rankings tend to be increasingly cited. This paper shows the opposite: that the inclusion of journals in local indexers ruled by inclusive logic reduces the Matthew effect on journal citations, since it enables them to be equally exposed. Thus, we based our arguments on the comparison of 68 Brazilian journals before and after they were indexed in the Scientific Periodicals Electronic Library (Spell), which ranks journals in the Brazilian management field based on local citations. Citation impact indicators and iGini (a new individual inequality analysis measure) were used to show that the inclusion of journals in Spell has increased their impact factor and decreased their citation inequality rates. In addition, the results indicated that the effect between ranking and inequality has declined after journals were included in Spell; this outcome indicates that the database has reduced the Matthew effect on journal citations.

Background: Alfalfa, the most economically important forage legume worldwide, features modest genetic progress due to long selection cycles and large extent of non-additive genetic variance associated with its autotetraploid genome. Methods: To improve the efficiency of genomic selection in alfalfa, we explored the effects of genome parametrization (as autotetraploid and diploid dosage, plus allele ratios) and SNP marker subsetting (all available SNPs; only genic regions; only non-genic regions) on genomic regressions, together with various levels of filtering on reading depth and missing rates. We used Genotyping by Sequencing-generated data and focused on traits of different genetic complexity, i.e., dry biomass yield in moisture-favorable (FE) and drought stress (SE) environments, leaf size, and onset of flowering, assessed on 143 genotyped plants from a genetically-broad European reference population and their phenotyped half-sib progenies. Results: On average, allele ratio improved the predictive ability compared with other genome parametrizations (+7.9% vs. tetraploid dosage, +12.6% vs. diploid dosage), SNP subsetting offered an advantage compared with any tested subsettings (+3.7% vs. genic regions, +7.6% vs. non-genic regions). However, when focusing on specific traits, different combinations of genome parametrization and subsetting reached better performances. We also released Legpipe2, a SNP calling pipeline tailored for reduced representation (GBS, RAD) medium-sized genotyping experiments.

(1) Background: This study evaluated the spatial position and anatomical characteristics related to impacted third molars by map-reading strategy using cone beam computed tomography (CBCT). (2) Methods: To determine the positioning of impacted third molars on CBCT it was used Winter's and Pell & Gregory's classifications, and the presence of external root resorption in mandibular second molars were based on Herman´s classification. The relationship between the mandibular third molar root apex and the mandibular canal was also analyzed. Fisher’s exact test was used to comparative statistical analysis. The significance level considered was 5%. (3) Results: The results showed that according to Winter's classification, 48.06 % of impacted teeth were in the mesioangular position. Using Pell & Gregory's classification, 43.22% of the impacted molars were in the position B and C, and 54.2% of the teeth were class II. 69.7% of teeth showed an absence of contact between the root apex and the mandibular canal and there was no occurrence of external root resorption in the distal of second molar in 88.7%. (4) Conclusions: The map-reading strategy using CBCT scans for anatomical positions and characteristics of impacted third molars increases professional confidence and establishes a parameter of quality and safety in the surgical procedure for the patient.

Populational aging is marked by chronic non-communicable diseases, such as metabolic syndrome (MetS). IL-10 and IL-1β are pleiotropic cytokines with multiple biological effects linked to metabolic disorders. This cross-sectional study assessed 193 participants' IL-10 and IL-1β serum levels regarding their role in developing MetS, clinical characteristics, and their IL1B rs1143627 and IL10 rs1800890 variants' genotype frequencies in a population over 60. IL-10 levels correlated weakly with HDL levels and fat mass and inversely with triglycerides, glucose, glycated hemoglobin, and estimated average blood glucose levels. IL-10 levels were also indirectly influenced by the patient's T2DM duration, lean mass amount, and bone mineral content. Participants with altered HDL, elevated serum glucose, raised HbA1c levels, or those over 80 had reduced serum IL-10 levels compared to those with normal levels or other age groups, respectively. Women also had higher serum IL-10 levels than men. Dissimilarity, IL-1β levels correlated directly only with the number of total leukocytes and segmented neutrophils, showing only significant variations with self-reported alcohol consumption. Our study also found that those with the IL10 AA genotype (lower IL-10 levels) had a significantly higher risk of developing MetS. These findings may help direct future research and more targeted therapeutic approaches in older adults.

Despite the impact that climate change is having on our planet and considering its consequences for future generations, much of the academic literature focuses on adolescent and adult percep-tions, giving little relevance to children's perceptions. Children's voices have the potential to in-fluence public opinion, which may in turn determine the direction of a new policy on the cli-mate crisis. In this context, it is urgent that we understand how children perceive this problem. This quantitative study was based on the application of 245 questionnaires to children aged be-tween 9 and 13 years old from five schools in north-eastern Portugal, more specifically in the region of Trás-os-Montes. To collect the data, we used a questionnaire with 26 questions, being 24 of closed response, Likert type, one of them open response, and one multiple choices. The da-ta were statistically treated using SPSS software. The results show that most of the children ex-press concern about the study's potential problem. However, they show some doubts and a lack of knowledge about some of the themes. We found differences between the two study cycles, with children in the 6th grade having a higher average in the understanding of the phenomenon, as well as the level of education of the parents being positively correlated with a more ecocen-tric posture. The female students also showed a slightly more ecological posture, i.e., an eco-friendlier posture. From the results obtained, we can open new paths for future research and contribute to the definition of policies and educational practices since the school has the respon-sibility to cooperate in the production of values, attitudes, and pro-environmental behaviours.

The second external cause of death from unintentional injuries is falls in people over 60, a worldwide public health problem. Associated factors are identified early in Primary Health Care. Thus, we analyze professional narratives about older adults/old age and the organization of services in the presence of fall-inducing frailty. A structured narrative was applied under the following stages: understanding the context; setting/plot/character analysis; and interpretive synthesis. Data were collected from August to November 2022, distributing 21 health professionals in three Narrative Focus Groups. In the analyses, the collective conceptions dialogued with Bourdieu’s Epistemology of field, habitus, and capital. Among the results, technical and common sense representations of older adults were simultaneously observed, along with the belief of old age as a problematic life stage. Care is centered on the installed disease/ailment. Encouraging autonomy and self-care emerges in integrative health practices, which older adults underestimate. Professionals access the lives of older adults according to their habitus, which, in turn, is structured (structuring) in the disputes for installed capital. Thus, the care provided disregards subjectivities and symbolic systems associated with falls.

The purpose of this study is to provide an accurate formula for calculating entropy for short DNA sequences and to demonstrate how to use it to examine leukemia patient surviving. We used IDIBAPS leukemia patient’s data base with 117 anonymized records. The generalized form of the Robust Entropy Estimator (EnRE) for short DNA sequences was proposed and key EnRE futures was showed. The Survival Analysis has been done using statistical package IBM SPSS. Entropy EnRE were calculated for leukemia patients for two samples: A. 2 groups divided by median EnRE and B. 2 groups of patients were formed according to their belonging to 1st and 4th quartiles of EnRE. The result of survival analysis are statistically significant: A. p < 0.05; B. p < 0.005. The death hazard for a patient with EnRE below median is 1.556 times that of a patient with EnRE over median and that the death hazard for a patient of 1st quartile (lowest EnRE) is 2.143 times that of a patient of 4th quartile (highest EnRE). The transition from median to quartile patients’ groups with more EnRE differentiation confirmed the unique significance of the entropy of DNA sequences for leukemia patients surviving.

Aerosol optical depth (AOT) was measured at Xavier University of Louisiana (29.96ᵒ N, 90.11ᵒ W and about 3m above sea level) using a hand-held sun photometer. AOT was measured at two different wavelengths (green at 505nm and red at 625nm) during the period from Sept-2017 to Feb-2018. In this study, we investigate the relationship between AOT and temperature, precipitation, barometric pressure and relative humidity. The maximum monthly average value for green AOT was 0.176 (measured in September) and the minimum monthly value is 0.040 (measured in January). For the red AOT the maximum monthly average value was 0.123 (measured in September) and the minimum is 0.034 (measured in December). The AOT–temperature relationship was predominantly positive, meaning that high AOT values correspond to high temperatures and low AOT values correspond to low temperatures. Relationship between AOT and rainfall is negative, meaning high rainfall averages are associated with low AOT values. AOT and atmospheric pressure have a predominantly negative relationship. The relationship between relative humidity and AOT is a complicated one and is hard to qualify as relative humidity varies very little during the study period.

In the bioprinting process, controlling the motion of bioprinters involves a computer-aided design (CAD) model, converting that model into g-code, and transmitting the motion commands to the bioprinters. The g-code file contains information about the motion of the axes and can be generated using various software. However, a challenge arises when using g-code between different bioprinters. Therefore, the objective of this study was to propose a reliable method for analyzing the differences in 3D bioprinting devices by parameterizing a crucial variable for extrusion bioprinting: the E-value. Four bioprinters from three different manufacturers were used to investigate the extrusion behavior when subjected to the same E-value.

The application of quantitative PCR (qPCR) as a routine method to detect and enumerate Paenibacillus larvae in honey and hive debris could greatly speed up the estimation of prevalence and outbreak risk of the American foulbrood (AFB) disease of Apis mellifera. However, none of the qPCR tests described so far has been officially proposed as a standard procedure for P. larvae detection and enumeration for surveillance purposes. Therefore, in this study inclusivity, exclusivity and sensitivity in detection of P. larvae spores directly in samples of honey and hive debris were re-evaluated for the previously published qPCR methods. To this aim recently acquired P. larvae sequence data were considered to assess inclusivity in silico and more appropriate non-target species were used to verify exclusivity experimentally. This led to the modification of one of the previously described methods resulting in a new test capable to allow the detection of P. larvae spores in honey and hive debris down to 1 CFU/g. The application of the qPCR test optimized in this study can allow to reliably detect and quantify P. larvae in honey and hive debris, thus circumventing the disadvantages of late AFB diagnosis based on clinical symptoms and possible underestimation of spore numbers that is the main drawback of culture-dependent procedures.

Molecular visualisation is fundamental in the current scientific literature, textbooks and dissemination materials, forming an essential support for presenting results, reasoning on and formulating hypotheses related to molecular structure. Visual exploration has become easily accessible on a broad variety of platforms thanks to advanced software tools that render a great service to the scientific community. These tools are often developed across disciplines bridging computer science, biology and chemistry. Here we first describe a few Swiss Army knives geared towards protein visualisation for everyday use with an existing large user base, then focus on more specialised tools for peculiar needs that are not yet as broadly known. Our selection is by no means exhaustive, but reflects a diverse snapshot of scenarios that we consider informative for the reader. We end with an account of future trends and perspectives.

The past two decades has seen a growing demand for high-power, high-voltage utility scale inverters mostly fueled by the integration of large solar PV and wind farms. Multilevel inverters have emerged as the industry choice for these megawatt range inverters because their reduced voltage stress, capable of generating an almost sinusoidal voltage, in-built redundancy, among others. This paper present a new Switched-Source Multilevel Inverter (SS MLI) architecture. The new inverter show superior over existing topologies. It has reduced voltage stress on the semiconductor, uses less number of switches –reduced size/weight/cost and increased efficiency. The new SSMLI is comprised of two voltage sources (V₁, V₂) and 6 switches. It is capable of generating 5-level output voltage in symmetric modes (i.e., V₁ = V₂), and 7-level output voltage in asymmetric modes (i.e., V₁ ≠ V₂). To demonstrate the validity of the proposed inverter, simulations results using MATLAB^® /Simulink^® for 5- and 7-level output voltages are presented . The simulations are also verified experimentally using a laboratory prototype.

The practical application of a multi-objective optimization strategy based on evolutionary algorithms was proposed to optimize the plastics thermoforming process. For that purpose, the various steps of the process were considered individually and the optimization strategy was applied to the determination of the final part thickness distribution with the aim of demonstrating the validity of the methodology proposed. The preliminary results obtained considering three different theoretical initial sheet shapes indicates clearly that the methodology proposed is valid, as it provides solutions with physical meaning and with a great potential to be applied in real practice.

The combination of eco-respectful epoxy compounds with the humins, a by-product of biomass chemical conversion technologies, allow the obtention of materials with high added value. In this work, we propose the chemical connection study of humins with two aliphatic diepoxides through the copolymerization reactions to synthesize sustainable bio-based thermosets. The mechanism insights for the crosslinking between the epoxides and humins was proposed considering the different functionalities of the humins structure. FT-IR spectroscopy, 1 D and 2 D NMR spectroscopy techniques were used to build the proposed mechanism. By these techniques, the principal chain connections and the reactivity of all the components were highlighted in the synthesized networks.

The population growth and its needs, has increasingly demanded water resources, requiring managers to adopt mechanisms to guarantee the availability and quality of water from springs. Among the instruments defined by law n. 9433/1997, water charges stand out. In this sense, the objective was to evaluate the evolution of charging for the use of water resources in Brazil, with emphasis on the channel of the Hydrographic Basin of the Paranaíba River. The methodology used was based on two phases, one of reviewing the articles available in Capes journals and the other, consulting the spreadsheets of the Araguari River Basin Agency with information on charges for the use of water within the competence of the Union in the Hydrographic Basin of the Paranaiba River. The results showed that charging for the use of water resources establish a relevant instrument for disciplining and raising financial resources that will enable improvements in the planning and management of water use. It should be noted that irrigation emerges as the main user of the flow captured from the Paranaíba River. However, the main source of funds for charging comes from the public supply. Among the Federation Units, the Federal District proved to be the largest source of contributions for charging the use of the Union's water resources in the Paranaíba River Basin.

The connectivity level of last-generation vehicles is constantly on the rise. The combined use of Vehicle-To-Everything (V2X) connectivity and autonomous driving can provide remarkable benefits through the optimization of the route and speed trajectory. In this framework, this paper focuses on vehicle eco-driving optimization in a connected environment. The virtual test rig of a premium segment passenger car was used for generating the simulation scenarios. The benefits, in terms of energy and time savings, that the introduction of V2X communication, integrated with cloud computing, can have in a real-world scenario were assessed. The Reference Scenario is a pre-defined Real Driving Emissions (RDE) compliant route, while the simulation scenarios were generated by assuming two different penetration levels of V2X technologies. The associated energy minimization problem is formulated and solved by means of a global optimization algorithm, i.e., Dynamic Programming (DP). The optimization framework includes information coming from the surrounding environment, e.g., traffic lights state, speed limits, distance to travel, etc. The simulations show that introducing a smart infrastructure along with optimizing the vehicle speed in a real-world route can potentially reduce the required energy by 54% while shortening the travel time by 38%. Finally, a sensitivity analysis is performed on the bi-objective optimization cost function to find a set of Pareto optimal solutions, between energy and travel time minimization.

This study aimed to determine whether camelina oil is safe for use in canine diets, using canola oil and flax oil as controls as they are similar and generally regarded as safe (GRAS) for canine diets. Thirty privately-owned adult dogs of various breeds (17 females; 13 males), with an average age of 7.2 ± 3.1 years (mean ± SD) and body weight (BW) of 27.4 ± 14.0 were used. After a 4-week wash-in period using sunflower oil and kibble, dogs were blocked by breed, age, and size, and randomly allocated to one of three treatment oils (camelina (CAM), flax (FLX), or canola (OLA)) at a level of 8.2 g oil/100g total dietary intake. Body condition score (BCS), BW, food intake (FI), and hematological and select biochemical parameters were measured at various timepoints over a 16-week feeding period. All data were analyzed with ANOVA using PROC GLIMMIX of SAS. No biologically significant differences were seen between treatment groups for BW, BCS, FI, hematological and biochemical results. Statistically significant differences noted among some serum biochemical results were considered small and due to normal biological variation. These results support a conclusion that camelina oil is safe for use in canine nutrition.

This paper aims to analyze the role of natural heritage cataloging when criminal events challenge natural history museums. This study investigates the rhino horn thefts in Italian natural history museums from 2011 to 2015 to provide a comprehensive framework for these robberies while highlighting the weaknesses and strengths to prevent thefts and safeguard both rhino horns and natural history collections from future targeting

The evolution in imaging technologies and artificial intelligence algorithms, coupled with improvements in UAV technology, has enabled the use of unmanned aircraft in a wide range of applications. The feasibility of this kind of approach for cattle monitoring has been demonstrated by several studies, but practical use is still challenging due to the particular characteristics of this application, such as the need to track mobile targets and the extensive areas that need to be covered in most cases. The objective of this study was to investigate the feasibility of using a tilted angle to increase the area covered by each image. Deep Convolutional Neural Networks (Xception architecture) were used to generate the models for the experiments, which covered aspects like ideal input dimensions, effect of the distance between animals and sensor, effect of classification error on the overall detection process, and impact of physical obstacles on the accuracy of the model. Experimental results indicate that oblique images can be successfully used under certain conditions, but some practical limitations need to be addressed in order to make this approach appealing.

Verification of inclusivity of molecular detection methods gives indications on the reliability of viral infections diagnosis because of the tendency of viral pathogens to undergo sequence variation. This study was aimed to select inclusive probe based reverse transcription quantitative PCR (RT-qPCR) assays for the diagnosis of the most widespread and detrimental viruses infecting honeybees, namely the acute bee paralysis virus (ABPV), the black queen cell virus (BQCV), the chronic paralysis bee virus (CBPV), the deformed wing virus variants A (DWVA) and B (DWVB), and the sacbrood virus (SBV). Therefore, detection methods previously described were re-evaluated in silico for specificity and inclusivity. Based on this evaluation, selected methods were modified or new ones were designed and tested in duplex RT-qPCR reactions. The limits of detection (LODs), effect of multiplexing on sensitivity and viral RNA quantification potential in bees and hive debris were assessed. This study made available diagnostic assays able to detect an increased number of virus variants compared to previously described tests and two viral pathogens in a single PCR reaction.

Forensic anthropologists play a key role in skeletal trauma analysis and commonly use macroscopic features to distinguish between trauma types. However, this approach can be challenging, particularly in cases of highly comminuted or incompletely recovered fractures. Histological analysis of microscopic fracture characteristics in fractured bones may thus help provide additional information on trauma type and bone fracture biomechanics in general. This study analysed the extent of microcrack damage to osteons in long bones with blunt force trauma (BFT) and gunshot trauma (GST), from both traumatic death cases and post-mortem experimental fractures. We identified four types of osteonal damage (OD). In traumatic death cases, OD affecting the inside of the osteon and compromising the Haversian canal (type 1) was found to be indicative of BFT. Moreover, OD affecting the cement line (type 3) and interstitial lamellae (type 4) was more common in the GST samples. OD affecting the inside of the osteon without compromising the Haversian canal (type 2) was not found to be indicative of either trauma type. In cases of experimental fractures, our study revealed that post-mortem fractures in dry bone samples featured the highest amount of OD, particularly of type 4. This study also found that the experimentally produced GST featured similar OD pattern to GST death cases. These findings support our hypothesis that there are distinct osteonal damage patterns in human long bones with BFT and GST, which are of relevant value for trauma analysis in forensic anthropology.

The use of wind energy has been developing fast over the last years. The global cumulative wind power capacity increased by 10.5% in 2019, most of which comes from onshore wind farms. One of the consequences of this continuous increase is the use of land for onshore wind farms. There are already cases worldwide where lack of well-established plans and strategies have caused delays in projects. The need for efficiently using land for wind farms will be mandatory in the short term. In this work, we present a numerical analysis to evaluate wind farm land-use. By defining the ratio between mechanical output power over an area as a parameter called land-use ratio, this work focused on comparing several cases of aligned and staggered layouts. Mechanical output power was estimated using a validated code based on Blade Element Momentum code, and the wake velocities and wake interaction effects were estimated using a validated wind turbine CFD model. In terms of output power, staggered designs are more efficient than aligned designs. However, the results showed that even though staggered designs produced higher output power, aligned farms with tight lateral spacing could be as efficient as staggered ones in terms of land-use but using fewer turbines. In summary, tightly aligned designs should be a tendency in the future towards efficient use of land in wind farms.

Cerebrovascular diseases represent a significant mortality rate worldwide and constitute a major public health and economic challenge. Many African countries such as Cape Verde are going through an epidemiological transition from communicable to non-communicable diseases, demographic and socioeconomic changes and facing an increase in cerebrocardiovascular diseases associated with increased cardiovascular risk. The present study aimed to identify the prevalence of risk factors that predispose to cardiovascular diseases in adult individuals residing on the island of Santiago. Cross-sectional population-based study with individuals over 18 years of age, of both sexes. Data collection took place in October and November 2021, in all municipalities on the island of Santiago. Individuals with Cape Verdean nationality who stayed abroad for more than one year and who arrived on the island of Santiago less than 30 days ago and individuals with any type of disability that could prevent them from participating in the study were excluded from the study. The sample size was calculated based on the projection of the population of the island of Santiago for the year 2021, according to the appropriate epidemiological model. Sociodemographic data were obtained through the application of a questionnaire containing age, sex, race, weight, height, risk factors (presence of diabetes, dyslipidemia, heredity, physical activity, smoking habits, history of cerebrovascular events, control of weight and blood pressure). RESULTS: Study sample is predominantly female (54.8%), the age group with the largest number was 18-27 years (21%); 42.2% with BMI ≥ 25 kg/m2; 65.1% sedentary; Smoking 7.3% and alcoholism 14.4%; 6.5% with diagnosed heart disease; 19.9% with close family members with cardiac pathology; 2.7% had a stroke, 0.1% had a transient ischemic attack; 0.5% acute myocardial infarction; 23.5% had the periodic habit of assessing blood pressure; 32.6% hypertensive; 4.5% with diabetics. CONCLUSIONS: The study showed that there is a high prevalence of cerebrovascular risk factors on Santiago Island, especially in females. Smoking and alcoholism showed a relationship with males. BMI, physical inactivity, diabetes and dyslipidemia were shown to be related to sex. Hypertension and Diabetes revealed a significant relationship with age group. Alcoholism, smoking, hypercholesterolemia and hypertriglyceridemia maintained a significant relationship with the municipalities.

Ketamine, a racemic mixture of esketamine (S-ketamine) and arketamine (R-ketamine), has re-ceived particular attention for its rapid antidepressant and antisuicidal effects. NMDA receptor inhibition has been indicated as one of the main mechanisms of action of the racemic mixture, but other pharmacological targets have also been proposed. This study aimed at exploring the possible multiple targets of ketamine enantiomers related to their antidepressant and antisuicidal effects. To this end, targets were predicted in SwissTargetPrediction software for each ketamine enan-tiomer. The targets related to depression and suicide were collected by GeneCards database. The intersections of targets were analyzed by Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG). Network pharmacology analysis was performed in GeneMania and Cy-toscape softwares. Molecular docking was used to predict the main targets of the network. The results indicated that esketamine and arketamine share some biological targets, particularly NMDA receptor and phosphodiesterases 3A, 7A and 5A, but have specific molecular targets. While esketamine is predicted to interact with the GABAergic system, arketamine may interact with macrophage migration inhibitory factor (MIF). Both ketamine enantiomers activate neuroplas-ticity-related signaling pathways and show addiction potential. Our results identified novel poorly explored molecular targets that may be related to the beneficial effects of esketamine and arketamine against depression and suicide.

Chondroitin is a glycosaminoglycan that has gained widespread use in nutraceuticals and pharmaceuticals, mainly for treating osteoarthritis. Traditionally, it has been extracted from animal cartilage but recently, biotechnological processes have emerged as a commercial alternative to avoid the risk of viral or prion contamination and offer a vegan-friendly source. Typically, these methods involve producing the chondroitin backbone using pathogenic bacteria and then modifying it enzymatically through the action of sulfotransferases. Despite the challenges of expressing active sulfotransferases in bacteria, the use of eukaryotic microorganisms is still limited to a few works using Pichia pastoris. To create a safer and efficient biotechnological platform, we have constructed a biosynthetic pathway for chondroitin production in S. cerevisiae as a proof-of-concept. Up to 125 mg/L and 200 mg/L of intracellular and extracellular chondroitin were produced, respectively. Furthermore, as genome-scale models are valuable tools for identifying novel targets for metabolic engineering, a stoichiometric model of chondroitin-producing S. cerevisiae has been developed and used in optimization algorithms. Our research has yielded several novel targets, such as uridine diphosphate(UDP)-N-acetylglucosamine pyrophosphorylase (QRI1), glucosamine-6-phosphate acetyltransferase (GNA1) or N-acetylglucosamine-phosphate mutase (PCM1) overexpression that might enhance chondroitin production, which will guide future experimental research to develop more efficient host organisms for the biotechnological production process.

Long coronavirus disease 2019 (COVID-19) may occur after experiencing acute COVID-19 infec-tion with many effects on patients´ kidneys. This study aimed to evaluate the clinical and labora-tory aspects of kidney function in individuals with long COVID in the Amazon region of Brazil. This cross-sectional study selected participants from a ‘long COVID’ clinical care program. Clini-cal data and baseline demographics were obtained, and blood samples were collected to quantify kidney-related markers. Patients were evaluated after COVID-19 infection at several time points as follows: 0–3 months, 3–6 months, 6–12 months, and 12 months. Altogether, 246 patients were selected for this study, and only 79 were hospitalised (9 in the intensive care unit because of COVID-19. Of the patients, 38 were diagnosed with hypertension after COVID-19, 52 cases had to have their medications adjusted, and 83 patients presented with kidney function decline. The older age group and individuals with glycaemic alterations presented with a higher risk of devel-oping kidney dysfunction. Therefore, health professionals should monitor long-term kidney mark-ers in long COVID.

Infrared thermography has already been proven to be a significant method in non-destructive evaluation since it gives information with immediacy, rapidity, and low cost. However, the thorniest issue for the wider application of IRT is quantification. In this work, we proposed a specific depth quantifying technique by employing the Gated Recurrent Units (GRU) in composite material samples via pulsed thermography (PT). Finite Element Method (FEM) modeling provides the economic examination of the response pulsed thermography. In this work, Carbon Fiber Reinforced Polymer (CFRP) specimens embedded with flat bottom holes are stimulated by a FEM modeling (COMSOL) with precisely controlled depth and geometrics of the defects. The GRU model automatically quantified the depth of defects presented in the stimulated CFRP material. The proposed method evaluated the accuracy and performance of synthetic CFRP data from FEM for defect depth predictions.

This study evaluated the grain size and high organic content from drinking water treatment sludge (DWTS) in the properties of ceramics. Samples were studied using raw and oven dried DWTS at 110 °C in two granulometries (0.180 mm and 0.075 mm), with and without calcination (550 °C), as partial replacement of two soils commonly used in ceramic production. Specimens were prepared with 5, 10, and 20% DWTS and calcined at 950 °C to determine their chemical, physical, mineralogical and mechanical properties. The DWTS reduced the density and increased the absorption and shrinkage of the specimens after calcination. An increase in strength with up to 10% sludge, driven by the presence of fluxing agents, was verified. The processing method had little influence on the properties of ceramic with above 10% of sludge. In conclusion, the use of raw DWTS obtained better results with low energy usage for its reuse.

Rheumatoid arthritis (RA) is a complex illness with both hereditary and environmental compo-nents. Globally, in 2019, 18 million people had RA. RA is characterised by persistent inflammation of the synovial membrane that lines the joints, cartilage loss, and bone erosion. Phenolic molecules are the most prevalent secondary metabolites in plants, with a diverse spectrum of biological ac-tions that benefit functional meals and nutraceuticals. These compounds have received a lot of at-tention recently because they have antioxidant, anti-inflammatory, immunomodulatory, and anti-rheumatoid activity by modulating tumour necrosis factor, mitogen-activated protein kinase, nu-clear factor kappa-light-chain-enhancer of activated B cells, and c-Jun N-terminal kinases, as well as other preventative properties. This article discusses dietary polyphenols, their pharmacological properties, and innovative delivery technologies for the treatment of RA, with a focus on their possible biological activities. Nonetheless, commercialization of polyphenols may be achievable only after confirming their safety profile and completing successful clinical trials.

As climate change should lead to an increase in the vulnerability and the sensitivity of forests to extreme climatic events, quantifying and predicting their response to more severe droughts remains a key task for foresters. Furthermore, recent works have suggested that tree diversity may affect forest ecosystem functioning, including their response to extreme events. In this study we aimed at testing whether the growth response of forest stands to stressful climatic events varied between mixed and monospecific stands, under various environmental conditions. We focused on beech-fir forests (Fagus sylvatica [L.] and Abies alba [L.]) and beech-oak forests (Fagus sylvatica [L.] and Quercus pubescent [L.]) in the French Alps. We used a dendrochronological dataset sampled in forest plots organized by triplets (one mixture and two monospecific stands) distributed in six sites along a latitudinal gradient. We tested (1) whether stand diversity (two-species stands vs monospecific stands) modulates the stands’ response to drought events in terms of productivity, (2) whether species identity may drive the diversity effect on resistance and recovery, and (3) whether this can be explained by interspecific interactions. We found that (1) interspecific differences in response to extreme drought events (possibly due to interspecific differences in hydraulic characteristics) can induce a mixture effect on stand growth, although it appeared (2) to be strongly depending on species identity (positive effect only found for beech-fir mixed stands), while (3) there were no significant non-additive effects of diversity on stand resistance and recovery, except for some specific cases. Overall, our study shows that promoting selected mixed stands management may buffer extrem drought effect on stand productivity.

The resolution of façade construction is not considered in the design process, as it can be expressed by complex technological innovations that emphasize the beauty of buildings. Nevertheless, resorting to this type of technology solution may not always be necessary. This study demonstrates this hypothesis through the investigation of five iconic case studies emphasizing the construction system analysis and the revelation of the brainwave idea. The brainwave idea defines the construction innovation that enables the detail by simplification rather than sophistication. Notable, unlike complex technological innovation, standard systems or elements applied strategically are considered little innovations to facilitate the resolutions of the façade complexity. Many of these innovations occur during the visual and constructive prototype progress required to validate the proposed solution and its performance. Therefore, real-scale prototype development that operates as a real-scale laboratory is necessary to correct and validate successive solutions.

Overcrowding in the emergency department is a problem that generates several implications for bed management, which is deemed one of a hospital's most critical processes. Effective management of hospital production capacity includes bed management processes, which can be improved in order to leverage hospital performance. Thus, this study sought to understand how bed management works and identify the main factors that influence its management. The study was performed through a case study, with data collected from semi-structured interviews and bibliographic research, which were triangulated. Thematic content analysis of the interviews and cross-analysis were performed. As a result, the main factors that influence hospital Bed management were identified: communication between teams and units; definition of performance goals; decisions shared between units; occupation and discharge planning by the teams; length of stay; the role of the nurses; and COVID-19. The greatest difficulties in the management process are related to these factors. Additionally, suggestions are provided to mitigate such reported difficulties.

In Cameroon, alcoholic beverages remain the main consumed drink. In the Northern regions, indigenous sorghum beers are popular and widely consumed in an actively fermenting state by the people. In this study, some physicochemical parameters of the alcoholic sorghum beverages and correlations between them were evaluated during fermentation for 10 days. The indigenous white and red beers were produced at the laboratory scale assisted by experimented producers and some parameters (pH, total acidity, alcohol, sugars, density, total solids, temperature, and conductivity) were measured on the wort and fermented beverages. The pH decreases from 3.2 to 2.4 and 3.11 to 2.41; total acidity increases from 1.07 to 5.1 g/l and 0.5 to 4.6 g/l; alcohol enhances from 0 to 9.5% and 0 to 6.8% (v/v); total solids drop from 13.6 to 5°P and 12.2 to 3.3°P were observed respectively in the white and red sorghum beers. The multivariate analysis showed a good correlation between consumption of sugar, the decrease of total solids and density with the decrease in pH. It was also shown that, a perfect link exist between the production of alcohol and organic acids. The hierarchical analysis showed that indigenous red beer samples fermented for 1 and 2 days and those fermented for 4 to 10 days are related and could be separate in two distinct groups, whereas white turbid beer samples are separated in three different groups, those fermented for 1 to 4 days, those 5 to 6 days and those 7 to 10 days. The results obtained could serve as a guide to better understand the fermentation process of the indigenous alcoholic sorghum-based beverages.

The objective of this work was to evaluate the blending and grinding influence over the nutritional, sensorial and sustainable aspects of coffee. To do so, a systematic review of the literature was accomplished. The database for the selection of relevant papers was the Portal de Periódicos da Capes, with remote access via CAFe. For the elaboration of the research, a chronological criterion with period restriction was used, considering the period between 2008-2022, to access all possible works related to the theme of this work. The following terms were used: blending; grinding; coffee; nutrition-al; sensorial; sustainability. To filter the searches, the association of these terms was also used by means of links and word associations. In the terminology, the Boolean operator AND was used to interconnect the terms used. Roasting degree, grinding, and amount of each coffee species impacts the nutritional and sensorial aspects of coffee. And the determination of each blending influences the sustainability of the environment, economic and social aspects of the coffee chain.

This literature review aims to assess the extent and depth of existing angel investment literature, particularly focusing on the city of Florianópolis. Through an examination of available literature, the report seeks to elucidate the mechanisms and practices employed in angel investing within the Florianópolis ecosystem. This comprehensive analysis involves synthesizing scientific literature and incorporating insights from authoritative sources in the field. Key findings highlight the imperative for further research and exploration in this domain and the potential for increased angel investment within the studied ecosystem.

Additive manufacturing (3D printing) and computer-aided design (CAD) still have limited up-take in biomedical and bioengineering research and education, despite the significant potential of these technologies. The utility of organ-scale 3D-printed models of living structures is widely appreciated, while the workflows for microscopy data translation into tactile-accessible replicas are not well developed yet. Here, we demonstrate an accessible and reproducible CAD-based methodology for generating 3D-printed scalable models of human cells cultured in vitro and imaged using conventional scanning confocal microscopy and fused deposition modelling (FDM) 3D printing. We termed this technology CiTo-3DP (Cells-in-Touch for 3D Printing). As a proof-of-concept, we created CiTo-3DP models of human pancreatic cancer cells and healthy dermal fibroblasts by using selectively stained nuclei and the cytoskeleton components (f-actin and α-smooth muscle actin). The production of dismountable sets of cellular components was al-so shown. The CiTo-3DP approach can be adapted to comprehensively present various cell types, subcellular structures and extracellular matrices. We envisage that the resulting CAD and 3D printed models could be used for further applications, including but not limited to in silico simulations for biology, medicine, pharmacological research, tissue engineering, morphometrical analysis, multiphysics modelling, education, rehabilitation of visually impaired people, and integration into virtual reality.

Mineral profile of beef interests human health, but also animal performance and meat quality. This study analyzes the relationships of 20 minerals in beef (ICP-OES) with 3 animal performance and 13 meat quality traits analyzed on 182 samples of Longissimus thoracis. Animals’ breed and sex showed limited effects. The major sources of variation (farm/date of slaughter, individual animal within group and side/sample within animal) differed greatly from trait to trait. Mineral contents were correlated to animal performance and meat quality being significant 52 out of the 320 correlations at the farm/date level, and 101 out of the 320 at the individual animal level. Five latent factors explained 69% of mineral co-variation. The most important, “Mineral quantity” factor correlated with age at slaughter and with the meat color traits. Two latent factors (“Na+Fe+Cu” and “Fe+Mn”) correlated with performance and meat color traits. Two other (“K-B-Pb” and “Zn”) correlated with meat chemical composition and the latter also with carcass weight and daily gain, and meat color traits. Meat cooking losses correlated with “K-B-Pb”. Latent factor analysis appears be a useful means of disentangling the very complex relationships that the minerals in meat have with animal performance and meat quality traits.

Defensive behavior is a function of specific survival circuits, the “aversive brain system”, that are thought to be conserved across vertebrates, and involve threat detection and the organization of defensive responses to reduce or eliminate threat. In mammals, these circuits involve amygdalar and hypothalamic subnuclei and midbrain circuits. The increased interest in teleost fishes as model organisms in neuroscience created a demand to understand which brain circuits are involved in defensive behavior. Telencephalic and habenular circuits represent a “forebrain circuit” for threat processing and organization of responses, being important to mounting appropriate coping responses. Specific hypothalamic circuits organize neuroendocrine and neurovegetative outputs, but are the less well-studied in fish. A “midbrain circuit” is represented by projections to interneurons in the optic tectum which mediate fast escape responses via projections to the central gray and/or the brainstem escape network. Threatening stimuli (especially visual stimuli) can bypass the “high road” and directly activate this system, initiating escape responses. Increased attention to these circuits in an evolutionary framework is still needed.

This study was aimed to examine the recent trends of antibiotic resistance (AR) prevalence in Staphylococcus aureus isolated from milk of animals with clinical mastitis in areas of the Abruzzo and Molise regions in central Italy. Fifty-four S. aureus isolates could be obtained from routine testing for clinical mastitis agents carried out in the author institution in years 2021 and 2022. These were analyzed for phenotypic resistance to eight antibiotics recommended for testing by European norms and belonging to the antibiotic classes used for mastitis treatment in milk producing animals. Moreover, the presence of 14 transferable genetic determinants encoding resistance to the same antibiotics was analyzed by qPCR tests developed in this study. Phenotypic resistance to non-β-lactams was infrequent, with only one 2022 isolate resistant to clindamycin. However, low level resistance to the β-lactam cefoxitin was observed in 59.2% isolates in both years making these isolates classifiable as methicillin resistant. The AR genotypes detected were blaZ gene (50% 2021 isolates and 44.4% 2022 isolates), ermC/T- aphA3-blaZ (one 2021 isolate), ant6-ermC/T-aphA3-blaZ (one 2021 isolate), ermB-blaZ (one 2022 isolate) and mecA-mph (one 2022 isolate). An interview to the veterinarians who conferred the samples, regarding antimicrobials prescribed for mastitis treatment and criteria of usage, indicated a possible causal relation with the AR test results. The low prevalence of AR genotypes, not increasing in time, most probably reflecting the reported management of antibiotic therapies in farms. However, the frequently observed cefoxitin resistance needs to be explained genotypically, further monitored and limited by modifying antibiotic usage practices. The identification of a mecA positive isolate in 2022 suggests to investigate further if this genotype is emerging locally.

Since it was proposed, the Robot Operating System (ROS) has fostered solutions for various problems in robotics in the form of ROS packages. One of these problems is Simultaneous Localization and Mapping (SLAM), a problem solved by computing the robot pose and a map of its environment of operation at the same time. The increasingly availability of robot kits ready to be programmed and also of RGB-D sensors often pose the question of which SLAM package should be used given the application requirements. When the SLAM subsystem must deliver estimates for robot navigation, as is the case of applications involving autonomous navigation, this question is even more relevant. This work introduces an experimental analysis of GMapping and RTAB-Map, two ROS compatible SLAM packages, regarding their SLAM accuracy, quality of produced maps and use of produced maps in navigation tasks. Our analysis aims ground robots equipped with RGB-D sensors for indoor environments and is supported by experiments conducted on datasets from simulation, benchmarks and from our own robot.

The research paper investigates the synthesis of metal matrix composites (MMCs) through the amalgamation of aluminum and silicon carbide particles, employing a two-step mixing methodology called the stir casting method. Metal matrix composites are materials that enhance the capabilities of a metallic matrix by incorporating another material. This leads to better characteristics such as tensile and shear moduli, fatigue and fracture properties, thermal expansion coefficient, and more. Aluminum-matrix composites are a class of materials that possess distinct characteristics that may be modified by altering factors such as the type of reinforcing material, the amount of reinforcement, and the fabrication technique employed to produce the composite. The concept aims to combine the desirable properties of metals and ceramics by incorporating durable refractory particles into a malleable metal structure. The fabrication process employs the stir casting technique, where reinforcing phases are mechanically stirred into a molten matrix to create cast composites with reinforcement volume percentages of up to 30%. The study utilizes Response Surface Methodology to enhance the mechanical properties of the composites through the optimization of manufacturing parameters, including stirring temperature, time, and speed. The study entails analyzing the correlation between different casting conditions and the resulting changes in hardness and tensile strength.

We present a new method of estimating fitness of countries and complexity of products by exploiting a non-linear non-homogeneous map applied to the publicly available information on the goods exported by a country. The non homogeneous terms guarantee both convergence and stability. After a suitable rescaling of the relevant quantities, the non homogeneous terms are eventually set to zero so that this new method is parameter free. This new map reproduces the findings of the method proposed by Tacchella et al. [1], and allows for an approximate analytic solution in case of actual binarized matrices based on the Revealed Comparative Advantage (RCA) indicator. This solution is connected with a new quantity describing the neighborhood of nodes in bipartite graphs, representing in this work the relations between countries and exported products. Moreover, we define the new indicator of country net-efficiency quantifying how a country efficiently invests in capabilities able to generate innovative complex high quality products. Eventually, we demonstrate analytically the local convergence of the algorithm.

Many applications in the context of Industry 4.0 require precise localization. However, indoor localization remains an open problem, especially in complex environments such as industrial environments. In recent years, we have seen the emergence of Ultra WideBand (UWB) localization systems. The aim of this article is to evaluate the performance of a UWB system to estimate the position of a person moving in an indoor environment. To do so, we implemented an experimental protocol to evaluate the accuracy of the UWB system both statically and dynamically. The UWB system is compared to a ground truth obtained by a motion capture system with a millimetric accuracy.

Non-small-cell lung cancer (NSCLC) is the second most common cancer worldwide, resulting in 1.8 million deaths/year. Most of the patients are diagnosed with a metastatic disease. Central Nervous System is one of the major metastatic sites. Brain metastases are associated with severe neurological symptoms, shorter survival and worst clinical outcomes. Brain radiotherapy and systemic oncological therapies are currently used for controlling both cancer progression and neurological symptoms. Brain radiotherapy includes stereotactic brain ablative radiotherapy (SBRT) or whole brain radiotherapy (WBRT). SBRT is applied for single or multiple (≤ 4) small lesions (< 3 cm), while WBRT represents the best treatment choice in case of multiple and large brain metastases. In both cases radiotherapy application can represent an overtreatment causing severe toxicities without achieving a significant clinical benefit. So far, some scores have been proposed to define the potential clinical benefits derived from brain radiotherapy. However, most of them are not well validated into clinical practice. In this article, by presenting a clinical case of a patient with advanced NSCLC carrying a BRAFV600E mutation and brain metastases, we review the variables as well as the potential applicable scores to be considered in order to predict clinical outcomes and benefits from brain radiotherapy in patients with NSCLC and brain metastases.

Non-small-cell lung cancer (NSCLC) is the second most common cancer worldwide, resulting in 1.8 million deaths/year. Most of the patients are diagnosed with a metastatic disease. Central Nervous System is one of the major metastatic sites. Brain metastases are associated with severe neurological symptoms, shorter survival and worst clinical outcomes. Brain radiotherapy and systemic oncological therapies are currently used for controlling both cancer progression and neurological symptoms. Brain radiotherapy includes stereotactic brain ablative radiotherapy (SBRT) or whole brain radiotherapy (WBRT). SBRT is applied for single or multiple (≤ 4) small lesions (< 3 cm), while WBRT represents the best treatment choice in case of multiple and large brain metastases. In both cases radiotherapy application can represent an overtreatment causing severe toxicities without achieving a significant clinical benefit. So far, some scores have been proposed to define the potential clinical benefits derived from brain radiotherapy. However, most of them are not well validated into clinical practice. In this article, by presenting a clinical case of a patient with advanced NSCLC carrying a BRAFV600E mutation and brain metastases, we review the variables as well as the potential applicable scores to be considered in order to predict clinical outcomes and benefits from brain radiotherapy in patients with NSCLC and brain metastases.

The aims of this paper can be traced back to goals number seven, twelve and thirteen introduced by Agenda 2030, namely "affordable and clean energy", “responsible consumption and production” and "climate action”, respectively. This is due to the fact that the present work supports decarbonization processes acting in a direct way on the electricity consumption achieved by plants pertaining to the waste industry; in fact, this study aims at the realization of a machine learning model for predicting the energy consumption achieved by a mechanical biological treatment (MBT) waste plant located in central Italy, given the distribution of the entering waste. This model is implemented in MATLAB. The model can be used to tune the distribution of the entering waste in order to adapt the plant energy consumption to the capability of the energy sources and can serve as a play-ground model for other energy transformation plants. The results of the study, which feed the literature on the application of artificial intelligence to real industrial plants, could be used to determine energy efficiency actions that could be incorporated into Property’s strategic planning.

The number of documents published on the Web other languages than English grows every year. As a consequence, it increases the necessity of extracting useful information from different languages, pointing out the importance of researching Open Information Extraction (OIE) techniques. Different OIE methods have been dealing with features from a unique language. On the other hand, few approaches tackle multilingual aspects. In such approaches, multilingual is only treated as an extraction method, which results in low precision due to the use of general rules. Multilingual methods have been applied to a vast amount of problems in Natural Language Processing achieving satisfactory results and demonstrating that knowledge acquisition for a language can be transferred to other languages to improve the quality of the facts extracted. We state that a multilingual approach can enhance OIE methods, being ideal to evaluate and compare OIE systems, and as a consequence, to applying it to the collected facts. In this work, we discuss how the transfer knowledge between languages can increase the acquisition from multilingual approaches. We provide a roadmap of the Multilingual Open IE area concerning the state of the art studies. Additionally, we evaluate the transfer of knowledge to improve the quality of the facts extracted in each language. Moreover, we discuss the importance of a parallel corpus to evaluate and compare multilingual systems.

It has been demonstrated that brief cycles of ischemia followed by reperfusion (IR) applied before exercise can improve performance and, IR intervention, applied immediately after exercise (post-exercise ischemic conditioning – PEIC) exerts a potential ergogenic effect to accelerate recovery. Thus, the purpose of this systematic review with meta-analysis was to identify the effects of PEIC on exercise performance, recovery and the responses of associated physiological parameters, such as creatine kinase, perceived recovery and muscle soreness, over 24 h after its application. From 3281 studies, six involving 106 subjects fulfilled the inclusion criteria. Compared to sham (cuff administration with low pressure) and control interventions (no cuff administration), PEIC led to faster performance recovery (p=0.004; ES=-0.49) and lower increase in creatine kinase (p<0.001; ES=-0.71) and muscle soreness (p<0.001; ES=-0.89) over 24 h. The effectiveness of this intervention is more pronounced in subjects with low/moderate fitness level and at least a total time of 10 min of ischemia (e.g. 2 cycles of 5 min) is necessary to promote positive effects.

Artificial intelligence (AI) is a tool that financial intermediaries and insurance companies use in most cases or are willing to use it in almost all their activities. AI can have a positive impact on almost all aspects of the insurance value chain.: pricing, underwriting, marketing, claims management, after-sales services. While it is very important and useful, AI is not free of risks, including its robustness against cyber-attacks and so-called adversarial attacks. Adversarial attacks are conducted by external entities to misguide and defraud the AI algorithms. The paper is designed to provide a review of adversarial AI and discuss its implications for the insurance sector. The study starts with a taxonomy of adversarial attacks and presents a fully-fledged example of claims falsification in health insurance. Some remedies, consistent with the current regulatory framework, are presented.

Variable nitrogen(N) rate fertilization based on remote sensing is challenging for cotton production fields, but active crop canopy sensors (ACS) appear as an alternative to make this practical on farm since they can be used at night as well. The crop spatial variability in inherent in crop production in general, and not on-the-go solutions can be used with this type of active sensing technologies. Thus, the purpose of this study was to investigate the potential of two vegetation indices to identify the N requirement variability for cotton plants and to develop prototype algorithms for topdressing nitrogen variable rate on commercial and experimental areas, using the N-sufficiency methodology based on virtual reference. The concept of virtual reference is to use a histogram to characterize the vegetation index of properly fertilized plants without establishing an N-rich plot as a reference strip. The experiment was conducted in strips with four different N rates (0, 45, 90 and 180 kgN ha^-1) during the 2015, 2016, 2017 and 2018 crop seasons in partnership with large cotton producers in Mato Grosso and also in experimental area of Embrapa Agrosilvopastoral. Two algorithms for variable rate nitrogen fertilization for cotton were developed, namely: 1) N recommendation algorithm for cotton in commercial production system: N rate (kg.N ha^-1) = -234.79 ISN² + 49,879 ISN + 195.15; R² = 0.97; and 2) for cotton grown in experimental area: N dose (kgN ha^-1) = -174.73 ISN² - 107.21 ISN + 306.78; R² = 0.94.

The 70/30 copper–nickel alloy is mainly used in critical parts with more demanding conditions in marine settings. There is a need for innovative methods that offer fast production and cost-effectiveness to supplement current copper–nickel alloy manufacturing processes. In this study, we employ wire-arc additive manufacturing (WAAM) to fabricate the 70/30 copper–nickel alloy. The as-built microstructure is characterized by columnar grains with prominent dendrites and chemical segregation in the inter-dendritic area. The aspect ratio of the columnar grain increases with increasing travel speed (TS) at the same wire feed speed (WFS). This is in contrast to an equiaxed grain structure with a more random orientation of conventional sample. The sample built with a WFS of 8 m/min, TS of 1000 mm/min, and a track distance of 3.85 mm exhibits superior corrosion properties in the 3.5 wt% NaCl solution compared to the conventional one, as evidenced by a higher film resistance and breakdown potential, along with a lower passive current density of the WAAM sample. The corrosion morphology reveals the critical roles played by the nickel element unevenly distributed between the dendrite core and inter-dendritic area.

Phosphorus (P) is a vital macronutrient crucial for crop productivity. Plants absorb P salts, mainly orthophosphate, from soil, yet the primary P source resides in organic materials. Soil phosphomonoesterases (APases) play a vital role in releasing P from organics via hydrolysis. Acid and alkaline phosphatases are crucial for alleviating P deficiency in plants. In this review focused on agricultural soils, we studied the relationship of biophysicochemical, agricultural management, and climate factors on APases also its connection with crop growth and yields. Our findings indicate a strong linkage between both APases and soil pH, positively influenced by clay content, organic matter, microbial biomass carbon, and nitrogen. Adopting healthy soil practices like balanced organic fertilizer usage, optimal soil water levels, reduced tillage, crop rotation, and using beneficial plant microbes help boost APase activity. However, the connection between APases and crop productivity remains uncertain due to insufficient research in this area. Our review emphasizes the vital need to evaluate the relationship between APases and meso-macrofauna, alongside essential plant nutrients such as potassium, nutrient ratios, and the synergistic effects of various factors. Understanding the rapid, efficient assimilation of P through APases in the plant-soil and/or plant-microbiota ecosystem it can be crucial for crop productivity and yields.

Using two independent speckle imaging systems based on the recently published LSOCI method operating in contact mode on the skin, we assess the reproducibility of in vivo measurements and conduct an inter-instrument comparison. To this aim, we propose a calibration method to handle each imaging system as a comprehensive unit, which includes the laser source, optics, and camera. Our experimental results demonstrate that the microcirculation images produced by both instruments exhibit high accuracy and stability, with microcirculation activity values in excellent agreement, thereby paving the way for clinical applications.

The so-called Born-Huang ansatz is a fundamental tool in the context of ab-initio molecular dynamics, viz., it allows to effectively separate fast and slow degrees of freedom and thus treating electrons and nuclei at different mathematical footings. Here we consider the use of a Born-Huang-like expansion of the three-dimensional time-dependent Schr\"odinger equation to separate transport and confinement degrees of freedom in electron transport problems that involve geometrical constrictions. The resulting scheme consists of an eigenstate problem for the confinement degrees of freedom (in the transverse direction) whose solution constitutes the input for the propagation of a set of coupled one-dimensional equations of motion for the transport degree of freedom (in the longitudinal direction). This technique achieves quantitative accuracy using an order less computational resources than the full dimensional simulation for a prototypical two-dimensional constriction.

Anomaly detection is an active area of research with numerous methods and applications. This survey reviews the state-of-the-art of data-driven anomaly detection techniques and their application to the the aviation domain. After a brief introduction to the main traditional data-driven methods for anomaly detection, we review the recent advances in the area of neural networks, deep learning and temporal-logic based learning. We cover especially unsupervised techniques applicable to time series data because of their relevance to the aviation domain, where the lack of labeled data is the most usual case, and the nature of flight trajectories and sensor data is sequential, or temporal. The advantages and disadvantages of each method are presented in terms of computational efficiency and detection efficacy. The second part of the survey explores the application of anomaly detection techniques to aviation and their contributions to the improvement of the safety and performance of flight operations and aviation systems. As far as we know, some of the presented methods have not yet found an application in the aviation domain. We review applications ranging from the identification of significant operational events in air traffic operations to the prediction of potential aviation system failures for predictive maintenance.

Objective: Our goal is to develop an online questionnaire to survey the prevalence of suicidal behavior. Methods: We developed a questionnaire with 51 variables and proceeded with validations. Validations were performed using face validity, content validity, and construct validity. Reliability was performed by test-rest. Results: The face validity was 1.0 and the content validity was 0.91. The exploratory factor analysis got KMO = 0.86 and extracted one principal factor. The confirmatory factor analysis demonstrates RMSEA= 0.000 and CFI=1.000. The test-retest had an intraclass correlated coefficient of 0.98. Conclusion: The adequate development questionnaire was validated, and we have an instrument to survey suicide behaviors in the pandemic time.

Directed movement towards a target requires spatial working memory, including processing of sensory inputs and motivational drive. In a stimulus-driven, operant conditioning paradigm designed to train zebrafish, we present a pulse of light via LED’s and/or sounds via an underwater transducer. A webcam placed below a glass tank records fish swimming behavior. During operant conditioning, a fish must interrupt an infrared beam at one location to obtain a small food reward at the same or different location. A timing-gated interrupt activates robotic-arm and feeder stepper motors via custom software controlling a microprocessor (Arduino). “Ardulink”, a JAVA facility, implements Arduino-computer communication protocols. In this way, full automation of stimulus-conditioned directional swimming is achieved. Precise multi­day scheduling of training, including timing, location and intensity of stimulus parameters, and feeder control is accomplished via a user-friendly interface. Our training paradigm permits tracking of learning by monitoring, turning, location, response times and directional swimming of individual fish. This facilitates comparison of performance within and across a cohort of animals. We demonstrate the ability to train and test zebrafish using visual and auditory stimuli. Current methods used for associative conditioning often involve human intervention, which is labor intensive, stressful to animals, and introduces noise in the data. Our relatively simple yet flexible paradigm requires a simple apparatus and minimal human intervention. Our scheduling and control software and apparatus (NemoTrainer) can be used to screen neurologic drugs and test the effects of CRISPR­-based and optogenetic modification of neural circuits on sensation, locomotion, learning and memory.

The corrosion behavior of Fe-containing directionally solidified (DS) and centrifugally cast (CC) Al-Si-Cu-Zn alloys with either Co or Ni additions has been investigated. Electrochemical and immersion corrosion methods were used to investigate the corrosion behavior in 0.6 M NaCl after short (1-hour) and long (30-day) exposure periods. The employed solidification methods allowed the production of samples with a wide range of secondary dendrite arm spacing (SDAS) while preserving Si and Fe-containing phases. The 0.5 wt.% Ni and Co additions led to the growth of the AlFeSi(Ni) and AlFeSi(Co) phases, but no binary AlNi nor AlCo intermetallic par-ticles have been generated. Potentiodynamic polarization studies at early exposure revealed an increase in the corrosion potential as the Ni was added for either fast or slow solidified samples. The electrochemical impedance spectroscopy at early exposure demonstrated that the Ni-modified alloy, on the other hand, was associated to smaller charge transfer resistances, in-dicating a reduction in corrosion resistance after short elapsed time into the electrolyte. Howev-er, 30-day immersion tests revealed much lower corrosion rate of the Ni-modified alloy than the other alloys, while the corrosion rates of the Co-modified and non-modified alloys were simi-lar. In the Ni-containing alloy, decreased corrosion rate under long-term corrosion process was attributed to the formation of a thick and dense alumina layer, effectively protecting the surface under such conditions. This work contributes to a better knowledge of the corrosion behavior of Ni- and Co-corrected Al industrial scrap compositions.

Background: There have been reports of numerous risk factors for Alzheimer's disease. Although widely investigated, some points during the evolution of the disease have been obscure. One of them is a great frustration with therapeutic expectations. Why has there been an increase in suicidal behavior in treatments with anti-beta-amyloid drugs? Interpersonal stress is one of the factors that may be connecting Alzheimer's disease to suicide. Method: To observe possible associations between Alzheimer's disease and suicide, two validated questionnaires were selected. We recruited 20 elderly patients over 65 years old to observe the feasibility of further research using these instruments. The study was considered viable if all participants showed no difficulty in understanding the questions and completed both questionnaires in less than 30 minutes with a tendency to homogeneity. A description of the statistical data obtained was made. Results: All participants adequately understood the questions and completed the questionnaires in less than 30 minutes. In 10% of the sample, suicide attempts occurred throughout their lives. The average age of respondents was 75 years old. The QoSL Pareto diagram demonstrated a large concentration. The data demonstrated homogeneity. Conclusions: The application of the questionnaires in a sample suitable for carrying out analytical statistics was demonstrated. We have two great tools to try to understand the possible association between Alzheimer's disease and suicide.

Graphene-based Field-Effect Transistors (FETs) integrated with microstrip patch antennas offer a promising approach for Terahertz signal radiation. In this study, a dual-stage simulation methodology is employed to comprehensively investigate the device’s performance. The initial stage, executed in MATLAB, delves into charge transport dynamics within a FET under asymmetric boundary conditions, employing hydrodynamic equations for electron transport in the graphene channel. Electromagnetic field interactions are modeled via Finite-Difference Time-Domain (FDTD) techniques. The second stage, conducted in COMSOL Multiphysics, focuses on the microstrip patch antenna’s radiative characteristics. Notably, analysis of the S11 curve reveals minimal reflections at the FET’s resonant frequency of 1.34672 THz, indicating efficient impedance matching. Examination of the radiation pattern demonstrates the antenna’s favorable directional properties. This research underscores the potential of graphene-based FETs for Terahertz applications, offering tunable impedance matching and high radiation efficiency for future Terahertz devices.

This paper presents a comprehensive investigation into the applicability and performance of two prominent growth models, namely the Verhulst model and the Montroll model, in the context of modeling tumor cell growth dynamics. Leveraging the power of Physics-Informed Neural Networks (PINNs), we aim to assess and compare the predictive capabilities of these models against experimental data obtained from the growth patterns of tumor cells. We employ a dataset comprising detailed measurements of tumor cell growth to train and evaluate the Verhulst and Montroll models. By integrating PINNs, we not only account for experimental noise but also embed physical insights into the learning process, enabling the models to capture the underlying mechanisms governing tumor cell growth. Our findings reveal the strengths and limitations of each growth model in accurately representing tumor cell proliferation dynamics. Furthermore, the study sheds light on the impact of incorporating physics-informed constraints on the model predictions. The insights gained from this comparative analysis contribute to advancing our understanding of growth models and their applications in predicting complex biological phenomena, particularly in the realm of tumor cell proliferation.

The present work focuses on fresh water signatures at the sediment-water interface (1 cm) using foraminiferal species in both austral winter and summer in eleven longitudinal transects on the Western South Atlantic continental margin between 27° and 37° S, at water depths of 11.7 to 250 m. Here we show that depth, salinity, temperature, oxygen, grain size (mud and sand percentage), suspended matter, organic matter, SiO₄, NO₂, and NO₃ in this order of importance are responsible for the distribution of foraminiferal species and thecamoebians. The presence of these microfossils indicate freshwater influx in four sectors over the continental shelf: Itajaí-Açu River, Laguna estuarine system, Patos Lagoon and RdlP (Rio de la Plata) will be explored further in detail. Our findings on freshwater signature on the continental shelf sediments through benthic species indicator are comparable to other continental systems worldwide, and a paleo record study would be useful for three South American countries (Brazil, Argentina and Uruguay). A freshwater signature in the continental shelf indicates deposition sites probably linked to anthropogenic impact since most of the pollutants and contaminants are dumped into water bodies that eventually reach and accumulate in the ocean. Therefore, the freshwater-related species on the continental shelf reflects exactly where the depositional sediment sites are, and where anthropogenic impacts accumulate. Foraminiferal microhabitat occupation within these zones is discussed in detail. And we conclude that together with the fauna, the abiotic parameters play an important role in determining the occurrence and degree of marine eutrophication induced by the input of polluted river waters, also showing possible anoxic environments on the shelf.

The relative proportions between nutrients affects the fate of them for metabolic interconversion, storage and turnover or, essentially for energy, in a process of partition modulated by hormonal and metabolic factors. A basic common chow model was used: ST or standard diet, HF high-fat and HP or high-protein had a common substrate. A CF cafeteria-type diet was added for comparison. Rats (female and male) received the diet for 30d. Nutrient intake and body composition were measured. Plasma glucose, lactate, testosterone (T) and estradiol (E2) were measured. Common groups energy intake, was largely based in carbohydrates CH, yielding 6C units, which were fully oxidized or stored as 2C fragments (fatty acids). Lactate (3C) was partially stored as glycerol of TAG. Accrual of 2C far exceeded about ten-fold that of 3C. Amino acid (AA) catabolism yielded 2C, 3C and 4C-5C fragments, the latter acting as Krebs cycle anaplerotic intermediates (KCAI), that facilitated the oxidation of 2C in detriment of TAG accumulation Lactate levels, were related to lactic dehydrogenase activities in muscle and liver. TAG accrual was maximal in CF, quite differently from HF with similar diet lipid proportion. Maximal rates of lipid storage were found in ST (and CF) groups. Females showed a higher ability to oxidize CH and to store less TAG. T increased N and protein deposition, whilst E2 decreased them favoring AA oxidation and the availability of KCAI. In the rat, an effective energy partition scheme requires that about half of the energy is provided by CH (polysaccharide), and needs enough protein to provide KCAI for a smooth 2C oxidation.

Animal welfare assessment protocols are important for identifying welfare problems in conservation programs. This study aimed to develop a baseline welfare protocol for the assessment of welfare in huemul (Hippocamelus bisulcus) in conservation centers. This protocol is based on the Welfare Quality® (WQ) framework for cattle, considering the available literature on the behaviours, ecology, conservation plans, captive management of this species, and welfare assessment protocols for other ungulate species. As a result, the protocol was specifically developed for huemuls and included four principles, 12 criteria, and 23 animal- and resource-based indicators. The 12 criteria of the WQ protocol were reduced to nine, and three new criteria were added because they were both feasible and essential for welfare assessment in captive huemuls. This protocol is mainly intended to identify welfare problems in endangered species in the context of conservation centers (reproduction, rescue, rehabilitation, or treatment centers). Thus, aggregation of different measures to obtain a global score has not been proposed. However, a scoring system that assigns a value on a 0-2 scale (0= No welfare concern; 1= welfare concern; 2= urgent welfare concern) is proposed for each category. Although further research is still needed to fully validate the protocol, this is the first development of a completed protocol for huemul welfare assessment.

Background: Despite advances in diagnosis and treatment, the incidence and mortality of infective endocarditis (IE) have increased in recent decades despite advances in diagnosis and treatment. Studies on the risk factors for mortality in endocarditis in Latin America are scarce. Methods: This retrospective cohort study included 240 patients diagnosed with IE according to the modified Duke criteria who were admitted to two university hospitals in Rio de Janeiro, Brazil from January 2009 to June 2021. Poisson regression analysis was performed for trend tests. The multivariate Cox proportional hazards model was used to estimate the hazard ratio (HR) of predictors of in-hospital mortality. Findings: The median age was 55 years (IQR: 39-66 years), 57% were male, and 41% had a Charlson comorbidity index (CCI) score > 3. Healthcare-associated infective endocarditis (54%), left-sided native valve IE (77.5%), and staphylococcal IE (26%) predominated. Overall in-hospital mortality was 45.8%, and mortality was significantly higher in the following patients: aged ≥ 60 years (53%), CCI score ≥ 3 (60%), healthcare-associated infective endocarditis (HAIE) (53%), left-sided IE (51%), and enterococcal IE (67%). Poisson regression analysis showed no trend in in-hospital mortality per year. The adjusted multivariate model determined that age ≥ 60 years was an independent risk factor for in-hospital mortality (HR = 1.9; 95% CI 1.2-3.1; p = 0.008). Interpretation: In this 12-year retrospective cohort, there was no evidence of an improvement in survival in patients with IE. Since older age is a risk factor for mortality, consensus is needed for the management of IE in this group of patients.

This paper presents an observer-based dynamic output feedback controller design procedure using Linear Matrix Inequality (LMI) optimization for second-order systems with uncertainty and persistent perturbation in the states. Using linear-quadratic criteria, cost functions are minimized in a two-stage procedure to compute optimal state feedback gains, and observer gains are coupled into a dynamic output feedback optimal controller. The LMI set used in the two stages is matrix inversion-free, a key issue for polytope formulation when uncertainty is present. The approach is tested in a mobile inverted pendulum robotic platform, and the effectiveness is verified in this underactuated and undesensed case.

We study in detail the influence of different chemical potentials (baryon, charged, strange, and neutrino) on how and how fast a free gas of quarks in the zero-temperature limit reaches the conformal limit. We discuss the influence of non-zero masses, the inclusion of leptons, and different constraints, such as charge neutrality, zero-net strangeness, and fixed lepton fraction. We also investigate for the first time how the symmetry energy of the system under some of these conditions approaches the conformal limit. Finally, we briefly discuss what kind of corrections are expected from perturbative QCD as one goes away from the conformal limit.

Friction stir welding (FSW) is a solid state welding process for joining metallic alloys and dissimilar metals. It has emerged as an alternative technology for welding high strength alloys that are difficult to join with conventional techniques. FSW is used to produce products with better mechanical properties. Now a days aluminum alloys have been widely used in several industrial applications such as aerospace, marine, automobile and commercial applications due to their light weight structure, better mechanical properties and high corrosion resistance.In this work, three welding parameters such as spindle speed, welding speed and plunge depth were considered for friction stir welding. FSW was carried out between dissimilar aluminum alloy plates (AA6061 and AA 8011) to produce butt joint.A Box-Behnken design with three factors and three levels was chosen to minimize the number of experimental conditions .The tensile strength and hardness of the welded regions were evaluated. The optimum level settings and the major parameters that influence the joint strength were obtained by Box-Behnken design.

In this paper, we analyze data from the 2012 Encuesta de Integración Social y Salud (Social Integration and Health Survey) of the Instituto Nacional de Estadística (Spanish National Institute of Statistics) to obtain profiles created by combining disability, poverty and social exclusion. We hypothesize that the probability that people will experience social exclusion increases if they have a disability, chronic illness or limitation in conducting everyday activities, and that this probability is greater for women than for men. To conduct our analysis, we constructed a social exclusion model based on a series of social determinants that acts as a dependent variable. In this context, social exclusion is understood to go beyond the concept of financial poverty. We performed bivariate analyses, in which we calculated the Odds Ratios (OR) for certain variables considered to be predictors of social exclusion. We also performed a means comparison test and an ANOVA test to observe differences between individuals with recognized disability and those without. Finally, we conducted logistic regression analysis to determine which vulnerability profiles are most likely to experience a situation of social exclusion. We also discuss the limitations of our study, and suggest areas in, which the relationships between health, social exclusion and disability can be further investigated.

As modern systems are becoming more complex their control strategy cannot longer relay only on measurement information that usually comes from probes but also from mathematical models. Those systems models can lead to unbearable computation times due to their own complexity, turning the control process non-viable, which leads to the implementation of surrogate models that enable to achieve estimates within acceptable time to take decisions. A control trained with Deep Reinforcement Learning algorithm, using a Physics-Informed Neural Network to obtain the temperature map on the following time step, replaces the need of running Direct Numerical Simulations. On this work we considered an 1D heat conduction problem, which temperature distribution feeds a control system to activate a heat source aiming to obtain a constant, previously defined, temperature value. With this approach, control training becomes much faster without the need of performing numerical simulations or laboratory measurements, as well the control is taken based on Neural Network enabling its implementation on simple processors to edge computing.

This comprehensive review delves into the multifaceted aspects of ERK signaling and the intricate mechanisms underlying distinct cellular fates. ERK1 and ERK2 (ERK) govern proliferation, transformation, epithelial-mesenchymal transition, differentiation, senescence, or cell death, con-tingent upon activation strength, duration, and context. The biochemical mechanisms underlying these outcomes are inadequately understood, shaped by signaling feedback and the spatial localization of ERK activation. Generally, ERK activation aligns with the Goldilocks principle in cell fate determination. Excessive or insufficient ERK activity inhibits growth, whereas moderated activation supports proliferation and survival. Unraveling the intricacies of how the degree of ERK activation dictates cell fate requires deciphering mechanisms encompassing protein stability, transcription factors downstream of ERK, and the chromatin landscape.

Single Image Super Resolution (SSIR) is a problem in computer vision where the goal is 1 to create high-resolution images from low-resolution ones. It has important applications in fields 2 such as medical imaging and security surveillance. While traditional methods such as interpolation 3 and reconstruction-based models have been used in the past, deep learning techniques have recently 4 gained attention due to their superior performance and computational efficiency. This article proposes 5 an Autoencoder based Deep Learning Model for SSIR, in particular, a light model that uses fewer 6 parameters without compromising performance. The down-sampling part of the Autoencoder 7 mainly uses 3 by 3 convolution and has no subsampling layers. The up-sampling part uses transpose 8 convolution and residual connections from the down sampling part. The model is trained using a 9 subset of the VILRC ImageNet database. The model is evaluated using quantitative metrics PSNR, 10 SSIM as well as qualitative measures such as perceptual quality. PSNR and SSIM figures as high as 11 76.06 and 0.93 are reported.

Adaptive mechanisms, such as channel hopping and packet replication, are used in low-power wireless networks to deal with the spatial and temporal variations in the link quality, and meet the reliability requirements of industrial applications (i.e., PDR>99%). However, the benefits of such mechanisms are limited and may have a large impact on end-to-end latency and energy consumption. Hence, in this paper we propose using adaptive modulation diversity, which allows to dynamically select different modulations, to improve link reliability. We present three adaptive modulation diversity selection strategies and validate them using the data derived from a real-world deployment using the IEEE 802.15.4g SUN modulations (i.e., SUN-FSK, SUN-OQPSK and SUN-ODFM) in an industrial environment. The results show that by using adaptive modulation diversity it is possible to improve link reliability regardless of node conditions.

Bovine respiratory disease (BRD) is a major health problem within the global cattle industry. This disease has a complex aetiology, with viruses playing an integral role. In this study, metagenomics was used to sequence viral nucleic acids in the nasal swabs of BRD affected cattle. Viruses detected included those well known for their association with BRD in Australia (bovine viral diarrhea virus 1), as well as viruses known to be present but not fully characterised (bovine coronavirus) and viruses that have not been reported in BRD affect cattle in Australia (bovine rhinitis, bovine influenza D, and bovine nidovirus). Nasal swabs from a case control study were subsequently tested for 10 viruses and the presence of at least one virus was found to be significantly associated with BRD. Some of the more recently detected viruses had inconsistent association with BRD. Full genome sequences for bovine coronavirus, a virus increasingly associated with BRD, and bovine nidovirus were complete. Both viruses belong to the Coronaviridae family, which are frequently associated with disease in mammals. This study has provided greater insights into the viral pathogens associated with BRD and highlighted the need for further studies to elucidate more precisely the roles viruses play in BRD.

The adoption of harmful postures due to a sedentary lifestyle, which involves long periods at work in offices, is a factor that exacerbates musculoskeletal risks. To examine these risks, there are numerous postures analysis methods, such as Rapid Upper Limb Assessment (RULA) and Rapid Office Strain Assessment (ROSA). RULA is a consolidated method to evaluate the exposure of individual workers to ergonomic risk factors associated with upper extremity musculoskeletal disorders. In turn, ROSA is a more recent method that quantifies exposure to risk factors in an office work environment. This research aims to identify whether there is harmony between these two methods, ROSA and RULA. Through applied research, from a qualitative perspective, the scientific procedures adopted were direct observation and ROSA and RULA postural assessment instruments. The study was conducted in the radiology service and focused on the outpatient reception workstation. Results indicated that further investigation must occur to make working conditions changes as soon as possible and that both methods are harmonic. As contributions of the analysis, we have discussed the working conditions and suggested improvements to reduce the risks of musculoskeletal morbidity symptoms. We recommend future studies aimed at measuring the levels of complementarity between these methods by quantitative approaches.