The connectivity level of last-generation vehicles is constantly on the rise. The combined use of Vehicle-To-Everything (V2X) connectivity and autonomous driving can provide remarkable benefits through the optimization of the route and speed trajectory. In this framework, this paper focuses on vehicle eco-driving optimization in a connected environment. The virtual test rig of a premium segment passenger car was used for generating the simulation scenarios. The benefits, in terms of energy and time savings, that the introduction of V2X communication, integrated with cloud computing, can have in a real-world scenario were assessed. The Reference Scenario is a pre-defined Real Driving Emissions (RDE) compliant route, while the simulation scenarios were generated by assuming two different penetration levels of V2X technologies. The associated energy minimization problem is formulated and solved by means of a global optimization algorithm, i.e., Dynamic Programming (DP). The optimization framework includes information coming from the surrounding environment, e.g., traffic lights state, speed limits, distance to travel, etc. The simulations show that introducing a smart infrastructure along with optimizing the vehicle speed in a real-world route can potentially reduce the required energy by 54% while shortening the travel time by 38%. Finally, a sensitivity analysis is performed on the bi-objective optimization cost function to find a set of Pareto optimal solutions, between energy and travel time minimization.

Prostate cancer (Pca) is a highly heterogeneous disease and the second more common tumor in males. Molecular and genetic profiles have been used to identify subtypes and guide therapeutic intervention. However, roughly 26% of primary Pca are driven by unknown molecular lesions. We use Principal Component Analysis (PCA) and custom RNAseq-data normalization to identify a gene expression signature which segregates primary PRAD from normal tissues. This Core-Expression Signature (PRAD-CES) includes 33 genes and accounts for 39% of data complexity along the PC1-cancer axis. The PRAD-CES is populated by protein-coding (AMACR, TP63, HPN) and RNA-genes (PCA3, ARLN1) sparsely found in previous studies, validated/predicted biomarkers (HOXC6, TDRD1, DLX1), and/or cancer drivers (PCA3, ARLN1, PCAT-14). Of note, the PRAD-CES also comprises six over-expressed LncRNAs without previous Pca association, four of them potentially modulating driver’s genes TMPRSS2, PRUNE2 and AMACR. Overall, our PCA capture 57% of data complexity within PC1-3. GO enrichment and correlation analysis involving major clinical features (i.e., Gleason Score, AR Score, TMPRSS2-ERG fusion and Tumor Cellularity) suggest that PC2 and PC3 gene signatures might describe more aggressive and inflammation-prone transitional forms of PRAD. Of note, surfaced genes may entail novel prognostic biomarkers and molecular alterations to intervene. Particularly, our work uncovered RNA genes with appealing implications on Pca biology and progression.

The H2-ICE project aims at developing, through numerical simulation, a new generation of hybrid powertrains featuring a hydrogen fueled Internal Combustion Engine (ICE) suitable for 12-meter urban buses, in order to provide a reliable and cost-effective solution for the abatement of both CO2 and criteria pollutant emissions. The full exploitation of the potential of such a traction system requires a substantial enhancement of the state of the art since several issues have to be addressed. In particular, the choice of the more suitable fuel injection system, as well as the control of the combustion process, are extremely challenging. Firstly, a high-fidelity 3D-CFD model will be exploited to analyze the in-cylinder H2 fuel injection through supersonic flows. Then, after the optimization of the injection and combustion process, a 1D model of the whole engine system will be built and calibrated allowing the identification of a “sweet spot”, in the ultra-lean combustion region, characterized by extremely low NOx emissions and, at the same time, high combustion efficiencies. Moreover, to further enhance the engine efficiency well above 40 %, different Waste Heat Recovery (WHR) systems will be carefully scrutinized, including both Organic Rankine Cycle (ORC)-based recovery units as well as electric turbo-compounding. A Selective Catalytic Reduction (SCR) aftertreatment system will be developed to further reduce NOx emissions to near-zero levels. Finally, a dedicated torque-based control strategy for the ICE coupled with the Energy Management Systems (EMS) of the hybrid powertrain, both optimized by exploiting Vehicle-To-Everything (V2X) connection, allow targeting an H2 consumption of 0.1 kg/km. Technologies developed in the H2-ICE project will enhance the know-how necessary to design and build engines and after-treatment systems for the efficient exploitation of H2 as a fuel, as well as for their integration into hybrid powertrains.

This manuscript employs a surface stress-driven nonlocal model to explore the combined effects of long-range interaction and surface energy on higher vibration modes of functionally graded nanobeams. The nanobeam theory, based on Bernoulli-Euler kinematics, incorporates surface effects such as surface elasticity, surface residual stresses, surface density, and rotary inertia. Hamilton's principle is applied to derive the governing equation with size-dependent considerations. The main outcomes of a parametric investigation, considering four different kinematic boundary conditions (Cantilever, Simply-Supported, Clamped-Pinned, and Doubly-Clamped) while varying the nonlocal parameter and material gradient index, are presented and discussed. Additionally, the normalized natural frequencies for the second, third, fourth and fifth modes of vibrations are provided and analyzed for each case under study. The results underscore the model's effectiveness in capturing surface energy effects on the overall dynamic behavior of functionally graded Bernoulli-Euler nanobeams, offering a cost-effective approach for designing and optimizing nano-scaled structures.

About a decade ago, active optical crop canopy sensors are being used to manage in-season variable nitrogen (N) fertilization in cornfields to match the plant demand that occurs mid season, increasing the efficiency compared to broadcast N applications. There were also initiatives of using ultrasonic sensors to measure plant height on-the-go for N application and crop water demand estimation, but no studies have integrated the optical, ultrasonic and canopy temperature for crop water stress assessment. The objective of this chapter is to evaluate the crop water status using infrared thermometry integrated with optical and ultrasonic sensors. Specifics objectives are: (i) evaluate the corn canopy temperature under different previous crop, N rates and irrigation levels; (ii) test a procedure for water stress assessment in commercial cornfields using the integration of sensors, (iii) correlate plant based sensor measurements (N status, plant height and canopy temperature) with grain yield, soil attributes and detailed topographical features, and (iv) study the spatial dependence of canopy temperature. This study was conducted in one small plot study area and on three producer’s fields in 2010. The small plot experiment consisted of two irrigation levels (70 and 100% of evapotranspiration – ET), two previous crop schemes (corn after corn – CC and corn after soybeans – CS), and four N rates (0, 75, 150, 225 kg N ha^-1). Canopy temperature, optical reflectance and plant height was measured from R2 until R6 in the small plots. At the producer’s fields, three long strips across center pivots were used to have a non-limited N and water crop and then continuous georeferenced sensors measurements were taken during side-dress (V11 growth stage) in about 10 hectares in each field. In the small plot study the crop canopy temperature was influenced by the irrigation levels and N rates. The procedure proposed could be used to identify zones in the producer’s field where water stress can be a yield limiting factor other than N derived. Inside the zones considered that water stress played a major whole, there were low correlations between plant height, plant N status and canopy temperature, indicating that the canopy temperature had more influence from water stress than vegetation cover. Concave and lower elevation areas had higher yields compared to convex and high elevation, showing that the detailed elevation mapping can be beneficial to delineate stables zones that possibly could be used in variable irrigation systems. The spatial dependence of canopy temperature was over 65 meters across producers’ sites, showing that the commercial high clearance applicator’s swath width was adequate to obtain accurate maps. The integration of plant N status, plant height and canopy temperature was beneficial to detect water stressed zones in the field. Opportunities can be foresee also for on-the-go N fertilization using integration of these sensors because is likely that water stress can be confounded with different N supply during the growing season and in different zones in the field.

The increasing popularity of porphyrins and hydroporphyrins for application in a variety of biomedical (photodynamic therapy, fluorescence tagging and imaging, photoacoustic imaging) and technical (chemosensing, catalysis, light harvesting) applications is also associated with the growing number of methodologies that enable their solubilization in aqueous media. Natively, the vast majority of synthetic porphyrinic compounds are not water-soluble. Moreover, any water-solubility imposes several restrictions on the synthetic chemist on when to install solubilizing groups in the synthetic sequence, and how to isolate and purify these compounds. This review summarizes the chemical modifications to render synthetic porphyrins water-soluble, with a focus on the work since 2000. Where available, practical data such as solubility, indicators for the degree of aggregation, and special notes for the practicioner are listed. We hope that this review will guide synthetic chemists through the many strategies known to make porphyrins and hydroporphyrins water soluble.

Background: Hospital accreditation has become ubiquitous in developing countries. Although studies recognize that accreditation can improve healthcare quality, efficiency, and safety, there are doubts about how hospitals deal with conflicts caused by the different institutional logics that inhabit this process. Therefore, this study aimed to investigate how professional and market logics, as well as the conflict between institutional demands, affect compliance with hospital accreditation. Methods: To this end, we developed a multiple case study in four Brazilian hospitals through in-depth interviews with sixteen participants (managers, physicians, nurses, physiotherapist) and on-site observation by the triangulation between the analysis of the narratives and the results of the multiple correspondence analysis. The interpretation and subsequent categorization of the interviews were guided by the study's analytical categories: institutional logics (professional and market); adoption objectives (legitimacy and efficiency); strategic responses to adoption (conformity, non-conformity, and customization); nature of demands (origin in the means and in goal). Results. The data showed that when professional logic is prominent, there is a greater tendency to customize activities, as there are conflicts in the means by which activities can be developed. When market logic stands out, there is a risk of non-conformity, mainly because the focus falls exclusively on goals. Finally, the data point to the absence of conflicts between justifications related to efficiency and legitimacy. Conclusion. We conclude the study by highlighting the theoretical and practical implications of recognizing the conflict between logics, contributing to a deeper understanding of how logic influences the attention given to specific demands and, more significantly, how they affect compliance with hospital accreditation standards, expanding the body of knowledge in the area.

Biomarkers have become an important tool in the diagnosis and management of cardio renal syndromes (CRS), a complex condition characterized by dysfunction in both the cardiovascular and renal systems. These biomarkers can help identify the presence and severity of CRS, predict its progression and outcomes, and facilitate personalized treatment options. Several biomarkers, including natriuretic peptides, troponins, and inflammatory markers, have been extensively studied in CRS and have shown promising results in improving diagnosis and prognosis. In addition, emerging biomarkers such as kidney injury molecule-1 and neutrophil gelatinase-associated lipocalin offer potential for early detection and intervention of CRS. However, the use of biomarkers in CRS is still in its infancy, and further research is needed to establish their utility in routine clinical practice. This review highlights the role of biomarkers in the diagnosis, prognosis, and management of CRS and discusses their potential as valuable clinical tools for personalized medicine in the future.

Firms are increasingly organized around the client. At the same time, there is customer pressure on green and sustainable organizations. The purpose of this paper is to map the current state of the research in the domain of customer-centric organizations from a sustainable perspective. We conducted a bibliometric analysis from published documents between 1990 and 2020. Key findings indicate that research on customer centricity and sustainability has increased in recent years and that the topic is structured into 3 clusters: (1) Sustainability; (2) Customer-Centric Perspective, and Sustainable Development; and (3) Customer Experience and Sales. Moreover, new concepts and technologies have been introduced during the last three years. The implementation of a bibliometric methodology and the focus given to the definition, the relationships, and the evolution of the three main clusters within the topic are the characteristics that differentiate our study from other publications or reviews in the field of research. This paper is beneficial for practitioners who aim to deploy the customer centricity approach in their firms from a sustainable perspective.

The Gram-negative, strictly anaerobic bacterium Megasphaera elsdenii was first isolated from the rumen in 1953 and is common in the mammalian gastrointestinal tract. Its ability to use either lactate or glucose as its major energy source for growth has been well documented, although it can also ferment amino acids to ammonia and branched-chain fatty acids, which are growth factors for other bacteria. The ruminal abundance of M. elsdenii usually increases in animals fed grain-based diets due to its ability to use lactate (the product of rapid ruminal sugar fermentation), especially at low ruminal pH (< 5.5). M. elsdenii has been proposed as a potential dietary probiotic to prevent ruminal acidosis in feedlot cattle and high-producing dairy cows. However, this bacterium has also been associated with milk fat depression (MFD) in dairy cows, although proving a causative role has remained elusive. This review summarizes the unique physiology of this intriguing bacterium, and its role of in ruminal community function and in the health and productivity of the host animal. In addition to its effects in the rumen, the ability of M. elsdenii to produce C2-C7 carboxylic acids – potential precursors for industrial fuel and chemical production, is examined.

We previously showed that, based on the frequency and distribution of specific cell types, rainbow trout (RT) intestinal mucosa is divided in two regions that form a complex nonlinear 3D pattern and have a different renewal rate. This work had two aims. First, to investigate whether the unusual distribution of cell populations reflects a similar distribution of functional activities. To this end, we determined the protein expression pattern of three well defined enterocytes functional markers: Peptide Transporter 1 (PepT1), Sodium-Glucose/Galactose Transporter 1 (SGLT-1) and fatty acid-binding protein 2 (Fabp2). Second, to characterize the structure of RT intestinal stem cells (ISC) niche and to determine whether the different proliferative rates correlate with a different organization and/or extension of the stem cells population. We studied the expression and localization of well-characterized mammal ISC markers: LGR5, HOPX, SOX9, NOTCH1, DLL1 and WNT3A. Our results indicate that morphological similarity is associated with similar function only between the first portion of the mid-intestine and the apical part of the complex folds in the second portion. Mammal ISC markers are all expressed in RT but their localization is completely different suggesting also substantial functional differences. Finally, higher renewal rates are supported by a more abundant ISC population.

The wastewater circular economy (WW-CE) promises a solution to improve water and sanitation management worldwide. However, the transition from conventional to circular wastewater treatment plants (WWTPs) requires facilitation to aid in decision makers understanding of integral sustainability impacts of alternative WW-CE configurations. This research implemented Life Cycle Sustainability Assessment (LCSA), combining Life Cycle Assessment, Social Life Cycle Assessment and Life Cycle Costing with a Multi-criteria Decision Making (MCDM) model to quantify environmental, socio-cultural, and economic impacts of conventional WWTPs with the WW-CE. Two real WWTPs in Chile have embraced the WW-CEs and adopting the title of Biofactories. These were considered as case studies, compared under three scenarios to demonstrate the sustainability trade-offs of the transition from no sanitation to conventional WWTPs and Biofactory WW-CE configurations. Results demonstrated that the transition to WW-CEs improved integral sustainability according to the LCSA model implemented in both WWPTs. This study highlights the urgent need to adopt sustainable decision-making models to not only improve sanitation coverage, but also improve sustainability performance of the sanitation industry across the globe.

Sentiment analysis to characterize properties of Bitcoin prices and their forecasting is here developed thanks to the capability of the Fuzzy transform to capture stylized facts and mutual connections between time series having different nature. Six years of daily Bitcoin Prices and Google Trends are analyzed in order to establish new perspectives in the management of their dynamics.

The growing awareness of the biological effects of artificial light on humans has stimulated ample research. It is now widely accepted that asynchrony between artificialand natural light-dark cycles can elicit severe detrimental health effects. New research has been devoted to lighting solutions that dynamically change their color to mimic spectral changes of daylight and to account for human needs. However, in some situations, the visual properties of light must be preserved: For example professional TV video editors and shift workers who must work under standardized lighting conditions to do color correction in post-production. We have investigated the possibility to tune circadian effects using white lights that are spectrally different but nonetheless have similar color coordinates thus appear as a similar white tone. Our simulation results indicate that it is possible to modulate circadian light effects by combining LEDs for neutral white (4000 K), a widely used white tone for indoor lighting in europe. The results also show that the solutions combining single-color LEDs do however not meet the quality criteria from the visual point of view because their color rendering ability decays to unacceptable low levels. Combining narrowband LEDs with a broadband white LED improves the color rendering quality and we show how far circadian light effects can be tuned according to common theoretical models. The aim is to reflect daylight situations with artificial lighting, thus having a high melatonin suppression in the morning and low melatonin suppression in the evening. As a consequence our aim is to show what maximum and minimum circadian effect is possible with the same set of LEDs.

The inclusion of scientific journals in prestigious indexers is often associated with higher citation rates; journals included in such indexers are significantly more acknowledged than those that are not included in them. This phenomenon refers to the Matthew effect on journal citations, according to which, journals in exclusive rankings tend to be increasingly cited. This paper shows the opposite: that the inclusion of journals in local indexers ruled by inclusive logic reduces the Matthew effect on journal citations, since it enables them to be equally exposed. Thus, we based our arguments on the comparison of 68 Brazilian journals before and after they were indexed in the Scientific Periodicals Electronic Library (Spell), which ranks journals in the Brazilian management field based on local citations. Citation impact indicators and iGini (a new individual inequality analysis measure) were used to show that the inclusion of journals in Spell has increased their impact factor and decreased their citation inequality rates. In addition, the results indicated that the effect between ranking and inequality has declined after journals were included in Spell; this outcome indicates that the database has reduced the Matthew effect on journal citations.

The large quantity of information retrieved from communities, public data repositories, web pages, or data mining can be sparsed and poorly classified. This work shows how to employ unsupervised classification algorithms such as K-means proper to classify user reviews into their closest category, forming a balanced data set. Moreover, we found that the text vectorization technique significantly impacts the clustering formation, comparing TF-IDF and Word2Vec. The value for mapping a cluster with movie genre was 81.34% ± 20.48 of the cases when the TF-IDF was applied, whereas Word2Vec only yielded a 53.51% ± 24.1. In addition, we highlight the impact of the removal of stop-words. Thus, we detected that pre-compiled lists are not the best method to remove stop-words before clustering because there is much ambiguity, centroids are poorly separated, and only 57% of clusters could match a movie genre. Thus, our proposed approach achieved a 94% of accuracy. After analyzing the classifiers’ results, we appreciated a similar effect when divided by the stop-words method removal. Statistically significant changes were observed, especially in precision metric and Jaccard scores in both classifiers, using custom-generated stop lists rather than pre-compiled ones. Reclassifying sparse data is strongly recommended as using custom-generated stop lists.

Because the including of human anatomy forms the foundation for clinical medicine, it has contributed a pivotal role in medical education for many centuries. Thus with advancements in the science of modern, current day medicine, its continued place in the medical school curriculum deserves careful attention. In an attempt to provide guidance to decision-makers involved in clinical anatomy curriculum development at the medical school level, the Educational Affairs Committee of the American Association of Clinical Anatomists (AACA) developed this document, which defines the contours of a gross anatomy curriculum leading to the M.D. or D.O. degree. The main body of the document sets forth the anatomical concepts as well as the subject matter a student should master prior to graduation from medical school. Gross anatomy dissection is still a crucial topic in graduate and medical school. The nature and content of gross anatomy, which was historically regarded as a core course in the first year of medical education in MBBS, MD, DO, and some PhD and Graduate curricula as well as in other disciplines of selective graduate education and non-allopathic medical programs, have been significantly impacted by emerging challenges in the pedagogy of delivering medical education in the past ten years. A seemingly ever-increasing emphasis on additional modules in molecular biology, emerging pharmacotherapeutics and pathophysiology content have resulted in a condensation and apparent erosion of previously allotted classroom and laboratory hours in the gross anatomy curriculum. In addition, an imposition of financial constraints and a decreasing availability of sufficient cadaver donations to support gross anatomy dissection labs has also occurred in some locations. An innovative clinically focused cadaveric anatomy program is described which has improved the delivery and content retention of medical and graduate students and has become one of the most sought-after modules in the revised clinically oriented curriculum and has been deemed highly relevant to current medical education and graduate studies.

This research proposes an algorithm to sign messages using the ElGamal asymmetric cryptosystem, called: Digital signature algorithm based on ElGamal, Diffie-Hellman protocol and the number π (DSAπ). This proposal has a high level of security like the DSA standard, in addition, execution times are reduced in relation to it. The Diffie-Hellman protocol and the number π were used in the construction of the digital signature algorithm in conjunction with the Hash-Sha-512 function. Some experiments are presented to provide evidence that the bits on the right side of the decimal point of π appear randomly, such as: a color image was constructed of a string of consecutive bits chosen at random, of the number π. Subsequently, parameters such as: entropy, correlation, discrete Fourier transform, goodness-of-fit test χ2 were evaluated. It is mentioned that an S-box 8×8 is involved in the signature. The sensitivity of the signature was measured, that is, when small changes are made to the sender’s private key, or small changes to the message. Finally, an image was constructed using the signatures of random texts, and subsequently the randomness of its pixels was obtained, to verify that there is no relationship between the different signatures.

The application of quantitative PCR (qPCR) as a routine method to detect and enumerate Paenibacillus larvae in honey and hive debris could greatly speed up the estimation of prevalence and outbreak risk of the American foulbrood (AFB) disease of Apis mellifera. However, none of the qPCR tests described so far has been officially proposed as a standard procedure for P. larvae detection and enumeration for surveillance purposes. Therefore, in this study inclusivity, exclusivity and sensitivity in detection of P. larvae spores directly in samples of honey and hive debris were re-evaluated for the previously published qPCR methods. To this aim recently acquired P. larvae sequence data were considered to assess inclusivity in silico and more appropriate non-target species were used to verify exclusivity experimentally. This led to the modification of one of the previously described methods resulting in a new test capable to allow the detection of P. larvae spores in honey and hive debris down to 1 CFU/g. The application of the qPCR test optimized in this study can allow to reliably detect and quantify P. larvae in honey and hive debris, thus circumventing the disadvantages of late AFB diagnosis based on clinical symptoms and possible underestimation of spore numbers that is the main drawback of culture-dependent procedures.

In the bioprinting process, controlling the motion of bioprinters involves a computer-aided design (CAD) model, converting that model into g-code, and transmitting the motion commands to the bioprinters. The g-code file contains information about the motion of the axes and can be generated using various software. However, a challenge arises when using g-code between different bioprinters. Therefore, the objective of this study was to propose a reliable method for analyzing the differences in 3D bioprinting devices by parameterizing a crucial variable for extrusion bioprinting: the E-value. Four bioprinters from three different manufacturers were used to investigate the extrusion behavior when subjected to the same E-value.

The past two decades has seen a growing demand for high-power, high-voltage utility scale inverters mostly fueled by the integration of large solar PV and wind farms. Multilevel inverters have emerged as the industry choice for these megawatt range inverters because their reduced voltage stress, capable of generating an almost sinusoidal voltage, in-built redundancy, among others. This paper present a new Switched-Source Multilevel Inverter (SS MLI) architecture. The new inverter show superior over existing topologies. It has reduced voltage stress on the semiconductor, uses less number of switches –reduced size/weight/cost and increased efficiency. The new SSMLI is comprised of two voltage sources (V₁, V₂) and 6 switches. It is capable of generating 5-level output voltage in symmetric modes (i.e., V₁ = V₂), and 7-level output voltage in asymmetric modes (i.e., V₁ ≠ V₂). To demonstrate the validity of the proposed inverter, simulations results using MATLAB^® /Simulink^® for 5- and 7-level output voltages are presented . The simulations are also verified experimentally using a laboratory prototype.

Groundwater degradation is a global problem linked to irrigation agriculture and aggravated by climate change. In drylands, where aquifer recharge is low, irrigation has emerged as an engine of economic growth. This problem falls under the paradigm of desertification, as it fits the definition of this complex problem in that the degradation of drylands is due to climatic variations and inappropriate human activities. Land Degradation Neutrality (LDN), the response of the United Nations Convention to Combat Desertification to the lack of progress in tackling desertification, is integrated into Sustainable Development Goal 15.3 and provides the adequate framework for implementing effective solutions. LDN prioritizes prevention strategies, and early warning systems coupled to integrated simulation models is a sound approach. We analyze the dynamics of a coastal aquifer in southern Spain, a “desertification landscape” according to the Spanish National Action Plan to Combat Desertification. For this purpose, we have (i) adapted a generic desertification model that considers socio-ecological systems as a particular case of predator-prey systems; and (ii) coupled to this model a risk analysis to calculate the probabilities of groundwater salinization under the current scenario of water resources use, driven by the expansion of greenhouse agriculture supported by external water transfer. The risk of desertification is close to 100%: groundwater salinity is 40 dS m-1 (well above tomato tolerance, 3.5 dS m-1), and 2.4 Mm3 yr–1 water transfer is needed to support the 631 ha of greenhouses. This worrying result suggests that complimentary solutions should be promoted to deactivate the ongoing process of desertification. Among them, we propose reclaimed water, diversifying the economy, or promoting crops adapted to aridity. This simulation framework shows how to explore the future of a socio-ecosystem under current scenarios and others that consider climate change, the energy crisis, or the impact of alternative solutions.

Several sun models suggest the radioactive balance where the concentration of greenhouse gases and the albedo effect are related to the Earth's surface temperature. There is a considerable increment of greenhouse gases due to anthropogenic activities. Climate change correlates with this alteration in the atmosphere and an increase in surface temperature. Efficient forecasting of climate change and its impacts of 1.5°C global warming above pre-industrial levels could be helpful to respond to the threat of c.c. and develop sustainably. Many studies have predicted the temperature change in the coming years. The global community has to create a model that can realize good predictions to ensure the best way to deal with the warming. Thus, we propose a finite-time thermodynamic (FTT) approach in the present work. The FTT can solve problems such as the faint young sun paradox. In addition, we use different machine learning models to evaluate our method and compare the experimental prediction and results.

This paper deals with the design and kinematic analysis of a novel mechanism for the elbow joint of an upper-limb exoskeleton, with the aim of helping operators, in terms of effort and physical resistance, in carrying out heavy operations. In particular, the proposed eight-bar el-bow joint exoskeleton mechanism consists of a motorized Watt I six-bar linkage and a suitable RP dyad, which connects mechanically the external parts of the human arm with the corre-sponding forearm by hook and loop velcro and thus, helping their closing relative motion for lifting objects during repetitive and heavy operations. This relative motion is not a pure rotation and thus, the upper part of the exoskeleton is fastened to the arm, while the lower part is not rigidly connected to the forearm, but through a prismatic pair which allows both rotation and sliding along the forearm axis. Instead, the human arm is sketched by means of a crossed four-bar linkage, which coupler link is considered as attached to the glyph of the prismatic pair, that is fastened to the forearm. Therefore, the kinematic analysis of the whole ten-bar mecha-nism, which is obtained by joining the Watt I six-bar linkage and the RP dyad to the crossed four-bar linkage, is formulated to investigate the main kinematic performance and for design purposes. The proposed algorithm has given several numerical and graphical results. Finally, a double-parallelogram linkage, as particular case of the Watt I six-bar linkage, was considered in combination with the RP dyad and the crossed four-bar linkage, by giving a first mechanical de-sign and a 3D printed prototype.

The development of Al-Ni alloys with a controlled microstructure has had a great impact on the field of study of aluminum-based alloys. In the present research, the influence of thermal parameters on the grain structures resulting from the directional solidification process of Al-Ni alloys with different alloy content has been studied. It has also been evaluated how different structures and the distribution of second phases influence the corrosion behavior and microhardness of alloys. The columnar-to-equiaxed transition (CET) was observed to occur when the temperature gradient in the melt decreased to values between 1.3 to 2.9 ° C/cm. In addition, a small increase in the microhardness values was observed as a function of the Ni-content. When the Ni-content increase, the resistance to polarization decreases for samples with equiaxed grain structure, throughout the range of compositions studied. Furthermore, the equiaxed grain structure presents higher resistance to polarization values than the columnar grain zone, for alloys with a composition equal to or lower than the eutectic composition.

This paper aims to analyze the role of natural heritage cataloging when criminal events challenge natural history museums. This study investigates the rhino horn thefts in Italian natural history museums from 2011 to 2015 to provide a comprehensive framework for these robberies while highlighting the weaknesses and strengths to prevent thefts and safeguard both rhino horns and natural history collections from future targeting

The evolution in imaging technologies and artificial intelligence algorithms, coupled with improvements in UAV technology, has enabled the use of unmanned aircraft in a wide range of applications. The feasibility of this kind of approach for cattle monitoring has been demonstrated by several studies, but practical use is still challenging due to the particular characteristics of this application, such as the need to track mobile targets and the extensive areas that need to be covered in most cases. The objective of this study was to investigate the feasibility of using a tilted angle to increase the area covered by each image. Deep Convolutional Neural Networks (Xception architecture) were used to generate the models for the experiments, which covered aspects like ideal input dimensions, effect of the distance between animals and sensor, effect of classification error on the overall detection process, and impact of physical obstacles on the accuracy of the model. Experimental results indicate that oblique images can be successfully used under certain conditions, but some practical limitations need to be addressed in order to make this approach appealing.

Past exploration for U deposit in the Philippines discovered the mineralization of radioactive allanite in Palawan. The allanite occurs as sand component in the heavily populated beach of Erawan, San Vicente, Palawan. This work assessed the risks associated with the radionuclides in Erawan beach by in situ ground radiometric survey of K, U, and Th in 694 sampling points. Principal component analysis (PCA) and Pearson correlation coefficient were used to determine the similarity between the radionuclides and to identify other probable anthropogenic sources of radionuclides. Our results show that the mean activity concentrations of K (597.8 Bq kg^-1) and Th (93.15 Bq kg^-1) are equivalent to 1.5 and 3.1 times of the world average natural radioactivity levels in soil, respectively, while the mean U (34.7 Bq kg^-1) is similar to the world average. The mean radiological risk assessments like radium equivalent, gamma specific activity index, external hazard index, internal hazard index, absorbed gamma dose rate, annual effective dose equivalent, annual gonadal equivalent dose, and excess lifetime cancer risk are 213.96 Bq kg^-1, 0.78, 0.58, 0.67, 97.24 nGy h^-1, 119.25 µSv y^-1, 684.39 µSv y^-1, and 0.42 (10^-3), respectively. Th consistently correlated most to the risks. We attribute the occurrence of Th to the presence of allanite, K to fertilizer use for farming, and U to both the allanite and farming. The results of our study can provide important baseline data for future detailed studies or monitoring of the long-term effects of elevated radiation levels to the local population of Erawan.

Zidovudine (AZT) has significantly reduced the mortality and morbidity rates among AIDS patients, but it has been associated with hepatotoxicity. AZT treatment has been linked to disrupted lipid and glucose metabolism, and the enhancement of pro-inflammatory chemokines and other mediators, which can lead to liver steatosis. In contrast, the administration of adenosine (ADO) has proven to be an effective hepatoprotector against both acute and chronic liver damage. Therefore, present study was aimed to investigate the harmful effects of chronic AZT administration and the beneficial effects of the co-administered ADO. Chronic oral AZT administration did not induce hyperglycemia or dyslipidemia, but serum liver marker enzyme activities were increased, as well as evidence of liver steatosis and inflammation. These findings were associated with low insulin and glucagon levels, elevated serum levels of pro-inflammatory cytokines and disruptions in cell redox states in these animals. ADO co-administration attenuated the deleterious effects induced by AZT: blocking the production of inflammatory molecules, increasing serum insulin and glucagon levels, and restoring liver cellular redox state. Then, blood insulin levels seemed to be greatly influenced by the cellular redox state, which was altered by AZT administration. This alteration is likely to be connected to mitochondrial integrity and metabolism.

Coastal resources in Lian, Batangas, have undergone significant degradation due to a combination of human activities and natural factors, including sea-level rise, changes in sea-surface temperature, fluctuations in rainfall, increased storm frequency, and sedimentation. This has led to adverse effects on key ecosystems such as corals, mangroves, and seagrasses. To assess the extent of climate change hazards on these coastal resources, a Vulnerability Assessment was conducted in the municipality of Lian, Batangas. The assessment employed a combination of the Coastal Integrity Vulnerability Assessment Toolkit (CIVAT) and Integrated Coastal Sensitivity, Exposure, and Adaptive Capacity to Climate Change (ICSEA-C) guidelines. Additionally, the analysis incorporated detailed mapping using Light Detection and Ranging (LiDAR) data for mangroves and LandSat 8 imagery for corals and seagrasses. The findings at the municipal scale revealed that a staggering 90% of mangroves in Lian, Batangas, were highly vulnerable. This vulnerability was attributed to a high score in intrinsic characteristics and a low adaptive capacity. Similarly, a majority of seagrasses in the area were classified as medium and highly vulnerable at the municipal level. Only 10–20% of seagrasses received low to medium vulnerability scores. Shockingly, almost 100% of the coral reefs in Lian, Batangas, were deemed highly vulnerable, indicating a critical threat to this crucial marine ecosystem.

Biosensors are measurement devices that can sense several biomolecules, and are widely used for the detection of relevant clinical pathogens such as bacteria and viruses, showing outstanding results. Because of the latent existing risk of facing another pandemic like the one we are living due to COVID-19, researchers are constantly looking forward to developing new technologies for diagnosis and treatment of infections caused by different bacteria and viruses. Regarding that, nanotechnology has improved biosensors design and performance through the development of materials and nanoparticles that enhance their affinity, selectivity, and efficacy in detecting these pathogens, such as employing nanoparticles, graphene quantum dots, and electrospun nanofibers. Therefore, this work aims to present a comprehensive review that exposes how biosensors work in terms of bacterial and viral detection, and the nanotechnological features that are contributing to achieving a faster yet still efficient COVID-19 diagnosis at the point-of-care.

This study aimed to determine whether camelina oil is safe for use in canine diets, using canola oil and flax oil as controls as they are similar and generally regarded as safe (GRAS) for canine diets. Thirty privately-owned adult dogs of various breeds (17 females; 13 males), with an average age of 7.2 ± 3.1 years (mean ± SD) and body weight (BW) of 27.4 ± 14.0 were used. After a 4-week wash-in period using sunflower oil and kibble, dogs were blocked by breed, age, and size, and randomly allocated to one of three treatment oils (camelina (CAM), flax (FLX), or canola (OLA)) at a level of 8.2 g oil/100g total dietary intake. Body condition score (BCS), BW, food intake (FI), and hematological and select biochemical parameters were measured at various timepoints over a 16-week feeding period. All data were analyzed with ANOVA using PROC GLIMMIX of SAS. No biologically significant differences were seen between treatment groups for BW, BCS, FI, hematological and biochemical results. Statistically significant differences noted among some serum biochemical results were considered small and due to normal biological variation. These results support a conclusion that camelina oil is safe for use in canine nutrition.

Flood Early Warning Systems (FEWSs) using Machine Learning (ML) has gained worldwide popularity. However, determining the most efficient ML technique is still a bottleneck. We assessed FEWSs with three river states, No-alert, Pre-alert, and Alert for flooding, for lead times between 1 to 12 hours using the most common ML techniques, such as Multi-Layer Perceptron (MLP), Logistic Regression (LR), K-Nearest Neighbors (KNN), Naive Bayes (NB), and Random Forest (RF). The Tomebamba catchment in the tropical Andes of Ecuador was selected as case study. For all lead times, MLP models achieve the highest performance followed by LR, with f1-macro (log-loss) scores of 0.82 (0.09) and 0.46 (0.20) for the 1- and 12-hour cases, respectively. The ranking was highly variable for the remaining ML techniques. According to the g-mean, LR models correctly forecast and show more stability at all states, while the MLP models perform better in the Pre-alert and Alert states. Future efforts are recommended to enhance the input data representation and develop communication applications to boost the awareness of the society for floods.

Mineral profile of beef interests human health, but also animal performance and meat quality. This study analyzes the relationships of 20 minerals in beef (ICP-OES) with 3 animal performance and 13 meat quality traits analyzed on 182 samples of Longissimus thoracis. Animals’ breed and sex showed limited effects. The major sources of variation (farm/date of slaughter, individual animal within group and side/sample within animal) differed greatly from trait to trait. Mineral contents were correlated to animal performance and meat quality being significant 52 out of the 320 correlations at the farm/date level, and 101 out of the 320 at the individual animal level. Five latent factors explained 69% of mineral co-variation. The most important, “Mineral quantity” factor correlated with age at slaughter and with the meat color traits. Two latent factors (“Na+Fe+Cu” and “Fe+Mn”) correlated with performance and meat color traits. Two other (“K-B-Pb” and “Zn”) correlated with meat chemical composition and the latter also with carcass weight and daily gain, and meat color traits. Meat cooking losses correlated with “K-B-Pb”. Latent factor analysis appears be a useful means of disentangling the very complex relationships that the minerals in meat have with animal performance and meat quality traits.

This study was aimed to examine the recent trends of antibiotic resistance (AR) prevalence in Staphylococcus aureus isolated from milk of animals with clinical mastitis in areas of the Abruzzo and Molise regions in central Italy. Fifty-four S. aureus isolates could be obtained from routine testing for clinical mastitis agents carried out in the author institution in years 2021 and 2022. These were analyzed for phenotypic resistance to eight antibiotics recommended for testing by European norms and belonging to the antibiotic classes used for mastitis treatment in milk producing animals. Moreover, the presence of 14 transferable genetic determinants encoding resistance to the same antibiotics was analyzed by qPCR tests developed in this study. Phenotypic resistance to non-β-lactams was infrequent, with only one 2022 isolate resistant to clindamycin. However, low level resistance to the β-lactam cefoxitin was observed in 59.2% isolates in both years making these isolates classifiable as methicillin resistant. The AR genotypes detected were blaZ gene (50% 2021 isolates and 44.4% 2022 isolates), ermC/T- aphA3-blaZ (one 2021 isolate), ant6-ermC/T-aphA3-blaZ (one 2021 isolate), ermB-blaZ (one 2022 isolate) and mecA-mph (one 2022 isolate). An interview to the veterinarians who conferred the samples, regarding antimicrobials prescribed for mastitis treatment and criteria of usage, indicated a possible causal relation with the AR test results. The low prevalence of AR genotypes, not increasing in time, most probably reflecting the reported management of antibiotic therapies in farms. However, the frequently observed cefoxitin resistance needs to be explained genotypically, further monitored and limited by modifying antibiotic usage practices. The identification of a mecA positive isolate in 2022 suggests to investigate further if this genotype is emerging locally.

Conceptual distance refers to the degree of proximity between two concepts within a conceptualization. It is closely linked with semantic similarity and relationship, but its computation relies entirely on the context of the given concepts. The DIS-C algorithm, which requires using search algorithms such as Breadth First Search, represents an advance in computing the semantic similarity/relation regardless of the type of knowledge structure and semantic relationships. The shortest path algorithm facilitates the determination of the semantic closeness between two indirectly connected concepts in an ontology by propagating local distances. This process is implemented for each concept pair to establish the most effective and efficient paths to connect these concepts. The algorithm identifies the shortest path between the concepts, allowing for the inference of the most relevant relationships between them. This approach contributes to developing a comprehensive understanding of the ontology and enhances the accuracy and precision of the semantic representation of the concepts. However, one of the critical issues is associated with the computational complexity due to the nature of the algorithm, which is errorn3. This paper studies alternatives to accelerate the DIS-C based on approximation and optimized algorithms, focusing on Dijkstra, pruned Dijkstra, and Sketched-based algorithms to compute conceptual distance. Based on the experiments, we discovered that the bottleneck can be avoided using the proposed 2-hop coverages, bringing DIS-C almost linearity.

We present a new method of estimating fitness of countries and complexity of products by exploiting a non-linear non-homogeneous map applied to the publicly available information on the goods exported by a country. The non homogeneous terms guarantee both convergence and stability. After a suitable rescaling of the relevant quantities, the non homogeneous terms are eventually set to zero so that this new method is parameter free. This new map reproduces the findings of the method proposed by Tacchella et al. [1], and allows for an approximate analytic solution in case of actual binarized matrices based on the Revealed Comparative Advantage (RCA) indicator. This solution is connected with a new quantity describing the neighborhood of nodes in bipartite graphs, representing in this work the relations between countries and exported products. Moreover, we define the new indicator of country net-efficiency quantifying how a country efficiently invests in capabilities able to generate innovative complex high quality products. Eventually, we demonstrate analytically the local convergence of the algorithm.

Non-small-cell lung cancer (NSCLC) is the second most common cancer worldwide, resulting in 1.8 million deaths/year. Most of the patients are diagnosed with a metastatic disease. Central Nervous System is one of the major metastatic sites. Brain metastases are associated with severe neurological symptoms, shorter survival and worst clinical outcomes. Brain radiotherapy and systemic oncological therapies are currently used for controlling both cancer progression and neurological symptoms. Brain radiotherapy includes stereotactic brain ablative radiotherapy (SBRT) or whole brain radiotherapy (WBRT). SBRT is applied for single or multiple (≤ 4) small lesions (< 3 cm), while WBRT represents the best treatment choice in case of multiple and large brain metastases. In both cases radiotherapy application can represent an overtreatment causing severe toxicities without achieving a significant clinical benefit. So far, some scores have been proposed to define the potential clinical benefits derived from brain radiotherapy. However, most of them are not well validated into clinical practice. In this article, by presenting a clinical case of a patient with advanced NSCLC carrying a BRAFV600E mutation and brain metastases, we review the variables as well as the potential applicable scores to be considered in order to predict clinical outcomes and benefits from brain radiotherapy in patients with NSCLC and brain metastases.

Non-small-cell lung cancer (NSCLC) is the second most common cancer worldwide, resulting in 1.8 million deaths/year. Most of the patients are diagnosed with a metastatic disease. Central Nervous System is one of the major metastatic sites. Brain metastases are associated with severe neurological symptoms, shorter survival and worst clinical outcomes. Brain radiotherapy and systemic oncological therapies are currently used for controlling both cancer progression and neurological symptoms. Brain radiotherapy includes stereotactic brain ablative radiotherapy (SBRT) or whole brain radiotherapy (WBRT). SBRT is applied for single or multiple (≤ 4) small lesions (< 3 cm), while WBRT represents the best treatment choice in case of multiple and large brain metastases. In both cases radiotherapy application can represent an overtreatment causing severe toxicities without achieving a significant clinical benefit. So far, some scores have been proposed to define the potential clinical benefits derived from brain radiotherapy. However, most of them are not well validated into clinical practice. In this article, by presenting a clinical case of a patient with advanced NSCLC carrying a BRAFV600E mutation and brain metastases, we review the variables as well as the potential applicable scores to be considered in order to predict clinical outcomes and benefits from brain radiotherapy in patients with NSCLC and brain metastases.

Background: Alfalfa, the most economically important forage legume worldwide, features modest genetic progress due to long selection cycles and large extent of non-additive genetic variance associated with its autotetraploid genome. Methods: To improve the efficiency of genomic selection in alfalfa, we explored the effects of genome parametrization (as autotetraploid and diploid dosage, plus allele ratios) and SNP marker subsetting (all available SNPs; only genic regions; only non-genic regions) on genomic regressions, together with various levels of filtering on reading depth and missing rates. We used Genotyping by Sequencing-generated data and focused on traits of different genetic complexity, i.e., dry biomass yield in moisture-favorable (FE) and drought stress (SE) environments, leaf size, and onset of flowering, assessed on 143 genotyped plants from a genetically-broad European reference population and their phenotyped half-sib progenies. Results: On average, allele ratio improved the predictive ability compared with other genome parametrizations (+7.9% vs. tetraploid dosage, +12.6% vs. diploid dosage), SNP subsetting offered an advantage compared with any tested subsettings (+3.7% vs. genic regions, +7.6% vs. non-genic regions). However, when focusing on specific traits, different combinations of genome parametrization and subsetting reached better performances. We also released Legpipe2, a SNP calling pipeline tailored for reduced representation (GBS, RAD) medium-sized genotyping experiments.

The aims of this paper can be traced back to goals number seven, twelve and thirteen introduced by Agenda 2030, namely "affordable and clean energy", “responsible consumption and production” and "climate action”, respectively. This is due to the fact that the present work supports decarbonization processes acting in a direct way on the electricity consumption achieved by plants pertaining to the waste industry; in fact, this study aims at the realization of a machine learning model for predicting the energy consumption achieved by a mechanical biological treatment (MBT) waste plant located in central Italy, given the distribution of the entering waste. This model is implemented in MATLAB. The model can be used to tune the distribution of the entering waste in order to adapt the plant energy consumption to the capability of the energy sources and can serve as a play-ground model for other energy transformation plants. The results of the study, which feed the literature on the application of artificial intelligence to real industrial plants, could be used to determine energy efficiency actions that could be incorporated into Property’s strategic planning.

This research uses the computing of conceptual distance to measure information content in Wikipedia categories. The proposed metric, generality, relates information content to conceptual distance by determining the ratio of information a concept provides to others compared to the information it receives. The DIS-C algorithm calculates generality values for each concept, considering each relationship's conceptual distance and distance weight. The findings of this study were compared to current methods in the field and found to be comparable to results obtained using the WordNet corpus. This method offers a new approach to measuring information content applied to any relationship or topology in conceptualization.

Artificial intelligence (AI) is a tool that financial intermediaries and insurance companies use in most cases or are willing to use it in almost all their activities. AI can have a positive impact on almost all aspects of the insurance value chain.: pricing, underwriting, marketing, claims management, after-sales services. While it is very important and useful, AI is not free of risks, including its robustness against cyber-attacks and so-called adversarial attacks. Adversarial attacks are conducted by external entities to misguide and defraud the AI algorithms. The paper is designed to provide a review of adversarial AI and discuss its implications for the insurance sector. The study starts with a taxonomy of adversarial attacks and presents a fully-fledged example of claims falsification in health insurance. Some remedies, consistent with the current regulatory framework, are presented.

Variable nitrogen(N) rate fertilization based on remote sensing is challenging for cotton production fields, but active crop canopy sensors (ACS) appear as an alternative to make this practical on farm since they can be used at night as well. The crop spatial variability in inherent in crop production in general, and not on-the-go solutions can be used with this type of active sensing technologies. Thus, the purpose of this study was to investigate the potential of two vegetation indices to identify the N requirement variability for cotton plants and to develop prototype algorithms for topdressing nitrogen variable rate on commercial and experimental areas, using the N-sufficiency methodology based on virtual reference. The concept of virtual reference is to use a histogram to characterize the vegetation index of properly fertilized plants without establishing an N-rich plot as a reference strip. The experiment was conducted in strips with four different N rates (0, 45, 90 and 180 kgN ha^-1) during the 2015, 2016, 2017 and 2018 crop seasons in partnership with large cotton producers in Mato Grosso and also in experimental area of Embrapa Agrosilvopastoral. Two algorithms for variable rate nitrogen fertilization for cotton were developed, namely: 1) N recommendation algorithm for cotton in commercial production system: N rate (kg.N ha^-1) = -234.79 ISN² + 49,879 ISN + 195.15; R² = 0.97; and 2) for cotton grown in experimental area: N dose (kgN ha^-1) = -174.73 ISN² - 107.21 ISN + 306.78; R² = 0.94.

Directed movement towards a target requires spatial working memory, including processing of sensory inputs and motivational drive. In a stimulus-driven, operant conditioning paradigm designed to train zebrafish, we present a pulse of light via LED’s and/or sounds via an underwater transducer. A webcam placed below a glass tank records fish swimming behavior. During operant conditioning, a fish must interrupt an infrared beam at one location to obtain a small food reward at the same or different location. A timing-gated interrupt activates robotic-arm and feeder stepper motors via custom software controlling a microprocessor (Arduino). “Ardulink”, a JAVA facility, implements Arduino-computer communication protocols. In this way, full automation of stimulus-conditioned directional swimming is achieved. Precise multi­day scheduling of training, including timing, location and intensity of stimulus parameters, and feeder control is accomplished via a user-friendly interface. Our training paradigm permits tracking of learning by monitoring, turning, location, response times and directional swimming of individual fish. This facilitates comparison of performance within and across a cohort of animals. We demonstrate the ability to train and test zebrafish using visual and auditory stimuli. Current methods used for associative conditioning often involve human intervention, which is labor intensive, stressful to animals, and introduces noise in the data. Our relatively simple yet flexible paradigm requires a simple apparatus and minimal human intervention. Our scheduling and control software and apparatus (NemoTrainer) can be used to screen neurologic drugs and test the effects of CRISPR­-based and optogenetic modification of neural circuits on sensation, locomotion, learning and memory.

Learning disorders (LD) are diagnosed in children whose academic skills of reading, writing or mathematics are impaired and lagged according to their age, schooling and intelligence. Children with LD experience substantial working memory (WM) deficits, even more pronounced if more than one of the academic skills is affected. We compared the task-related EEG power spectral density of children with LD (n= 23), with a control group of children with good academic achievement (n= 22), during the performance of a WM task. sLoreta was used to estimate the current distribution at the sources, and 18 brain regions of interests (ROIs) were chosen with an extended version of the eigenvector centrality mapping technique. In this way, we lessen some drawbacks of the traditional EEG at the sensor space by an analysis at the brain sources level over data-driven selected ROIs. Results: The LD group showed fewer correct responses at the WM task, an overall slower EEG with more theta activity in all ROIs, less upper-alpha power at posterior areas, and less high-frequency beta activity in frontal areas. We explain these EEG patterns in LD children as indices of an inefficient neural resource management related with a delay in the neural development.

CVDs are a leading cause of death globally. In CVDs, the heart is unable to deliver enough blood to other body regions. Since effective and accurate diagnosis of CVDs is essential for CVD prevention and treatment, machine learning (ML) techniques can be effectively and reliably used to discern patients suffering from a CVD from those who do not suffer from any heart condition. Namely, machine learning algorithms (MLAs) play a key role in the diagnosis of CVDs through predictive models that allow us to identify the main risks factors influencing CVD development. In this study, we analyze the performance of ten MLAs on two datasets for CVD prediction and two for CVD diagnosis. Algorithm performance is analyzed on top-two and top-four dataset attributes/features with respect to five performance metrics –accuracy, precision, recall, f1-score, and roc-auc – using the train-test split technique and k-fold cross-validation. Our study identifies the top two and four attributes from each CVD diagnosis/prediction dataset. As our main findings, the ten MLAs exhibited appropriate diagnosis and predictive performance; hence, they can be successfully implemented for improving current CVD diagnosis efforts and help patients around the world, especially in regions where medical staff is lacking.

Bovine respiratory disease (BRD) is a major health problem within the global cattle industry. This disease has a complex aetiology, with viruses playing an integral role. In this study, metagenomics was used to sequence viral nucleic acids in the nasal swabs of BRD affected cattle. Viruses detected included those well known for their association with BRD in Australia (bovine viral diarrhea virus 1), as well as viruses known to be present but not fully characterised (bovine coronavirus) and viruses that have not been reported in BRD affect cattle in Australia (bovine rhinitis, bovine influenza D, and bovine nidovirus). Nasal swabs from a case control study were subsequently tested for 10 viruses and the presence of at least one virus was found to be significantly associated with BRD. Some of the more recently detected viruses had inconsistent association with BRD. Full genome sequences for bovine coronavirus, a virus increasingly associated with BRD, and bovine nidovirus were complete. Both viruses belong to the Coronaviridae family, which are frequently associated with disease in mammals. This study has provided greater insights into the viral pathogens associated with BRD and highlighted the need for further studies to elucidate more precisely the roles viruses play in BRD.

Polymeric wet-strength agents are important additives used in the paper industry to improve the mechanical properties of paper products, especially when they come in contact with water. These agents play a crucial role in enhancing the durability, strength, and dimensional stability of paper products. The aim of this review is to provide an overview of the different types of wet-strength agents available and their mechanisms of action. We will also discuss the challenges associated with the use of wet-strength agents and the recent advances in the development of more sustainable and environmentally friendly agents. As the demand for more sustainable and durable paper products continues to grow, the use of wet strength agents is expected to increase in the coming years.

The global consumption of vegan foods is experiencing an expressive upward trend, underscoring the critical need for quality control measures based on nutritional and functional considerations. This study aimed to evaluate the functional quality of caviar and salmon analogs food inks, based on pulses combined with nano ingredients. The primary objective of this work was to determine the total antioxidant compounds contained in these samples using a voltammetric technique with a glassy carbon electrode. Approximately 100 mg of samples underwent ethanolic extraction (70%) with 1 hour of stirring. The voltammograms were acquired under specific conditions: 10 mL of phosphate buffer electrolyte with a pH of 3.0; an initial potential (Ei) of 0.0 V; a final potential (Ef) of 1.0 V; a pulse amplitude of 50 mV; and a scan rate of 50 mV s-1. The reference electrode used was Ag/AgCl (KCl 3 mol L-1), and the auxiliary electrode was a platinum wire. The voltammograms revealed prominent anodic current peaks at 0.76-0.78 V, which are attributed to isoflavones. Isoflavones, known secondary metabolites with substantial antioxidant potential commonly found in pulses, were identified. The total isoflavone concentrations obtained ranged from 31.5 to 64.3 mg Eq genistein 100 g-1. The results not only validated the efficacy of the electrochemical sensor for quantifying total antioxidant compounds in the samples but also demonstrated that the concentration of total isoflavones in caviar and salmon analogs fell within the expected limits.

The objective of this work was to investigate the use of remotely sensed vegetation indices to improve the quality of yield maps. The method was applied to the yield data of twelve cornfields from the Data Intensive Farm Management project. The results revealed the need to time shift the yield values up to three seconds to better match the sensor readings with the geographic coordinates. The residuals of the yield prediction model were used to identify points with unlikely yield values for that location, as an alternative to traditional approaches using local spatial statistics, without any assumption of spatial dependence or stationarity. The temporal and spatial distribution of the standardized coefficients for each experimental unit highlighted the presence of trends in the data. At least five out of the twelve fields presented trends that could have been induced by data collection.

In this work we present a versatile, rapid, and low-cost manufacturing technique to develop bioceramic scaffolds that could enhance bone tissue regeneration via microwave preparation using a commercial microwave oven. The scaffolds were prepared combining hydroxyapatite and water glass (sodium trisilicate solution), foamed by using a microwaves oven and then characterized by means of SEM-EDS, mechanical properties, infrared spectroscopy (ATR-FTIR), density and stability test in water. Furthermore, in vitro tests were performed to verify the affinity of osteoclast cells versus the so prepared scaffold. The morphology of the samples showed interconnected pores suitable for promoting tissue regeneration and vascularization while specific mechanical properties were preserved. The physicochemical characterization and the in vitro tests presented promising results for bone regenerative applications.

A phase 1-2, prospective, multicenter, randomized, open-label clinical trial (Code RPCEC00000382, https://rpcec.sld.cu/trials/RPCEC00000382-En/), with parallel groups, involving 1161 participants was designed to assess safety and immunogenicity of two Cuban COVID-19 vaccines (Mambisa and Abdala) in boosting COVID-19 immunity of convalescent adults after receiving one dose of either vaccine. The main safety outcome was severe vaccination adverse events occurring in <5% of vaccinees. Main immunogenicity success endpoints were ≥4-fold anti-RBD IgG seroconversion or ≥20% increase in ACE2-RBD inhibitory antibodies in >55% of vaccinees in Phase 1 and >70% in Phase 2. Neutralizing antibody titers against SARS-CoV-2 variants were evaluated. Both vaccines were safe; no deaths or severe adverse events occurred. Mild intensity adverse events were the most frequent (>73%); headache predominated for both vaccines. Phase 1 responders were 83.3% (p = 0.0018) for Abdala. Mambisa showed similar results. Phase 2 responders were 88.6% for Abdala (p <0.0001) and 74.2% for Mambisa (p = 0.0412). In both phases, anti-RBD IgG titers, inhibition percentages and neutralizing antibody titers increased significantly after the booster dose. Both vaccines were safe and their immunogenicity surpassed the study endpoints.

Unmanned Aerial Vehicles (UAVs) are being increasingly viewed as valuable tools to aid the management of farms. This kind of technology can be particularly useful in the context of extensive cattle farming, as production areas tend to be expansive and animals tend to be more loosely monitored. With the advent of deep learning, and Convolutional Neural Networks (CNNs) in particular, extracting relevant information from aerial images has become more effective. Despite the technological advancements in drone, imaging and machine learning technologies, the application of UAVs for cattle monitoring is far from being thoroughly studied, with many research gaps still remaining. In this context, the objectives of this study were threefold: 1) to determine the highest possible accuracy that could be achieved in the detection of animals of the Canchim breed, which is visually similar to the Nelore breed (\textit{Bos taurus indicus}); 2) to determine the ideal Ground Sample Distance (GSD) for animal detection; 3) to determine the most accurate CNN architecture for this specific problem. The experiments involved 1,853 images containing 8,629 samples of animals, and 15 different CNN architectures were tested. A total of 900 models were trained (15 CNN architectures * 3 spacial resolutions * 2 datasets * 10-fold cross validation), allowing for a deep analysis of the several aspects that impact the detection of cattle using aerial images captured using UAVs. Results revealed that many CNN architectures are robust enough to reliably detect animals in aerial images even under far from ideal conditions, indicating the viability of using UAVs for cattle monitoring.

In this work, a method for measuring tow angles in carbon fiber components, based on the use of a polarized camera, is analyzed from a metrological point of view. Carbon fibers alter the direction of the reflected light electrical field, so that in each point of the surface of a composite piece the angle of polarization of reflected light matches the fiber orientation. A statistical analysis of the angle of linear polarization (AoLP) in each pixel of each examined area allows to evaluate the average winding angle. An evaluation of the measurement uncertainty of the method on a cylinder obtained by a filament winding process is carried out, and the result appears adequate for the study of the distribution of angles along the surface of the piece, in order to optimize the process.

Whenever vegetated areas are monitored over time, phenological changes in land cover should be decoupled from changes in acquisition conditions, like atmospheric components, sun and satellite heights, and imaging instrument. This especially holds when the multispectral (MS) bands are sharpened for spatial resolution enhancement by means of a panchromatic (Pan) image of higher resolution, a process referred to as pansharpening. In this paper, we provide evidence that pansharpening of visible/near-infrared (VNIR) bands takes advantage from a correction of the path radiance term introduced by the atmosphere, during the fusion process. This holds whenever the fusion mechanism emulates the radiative transfer model ruling the acquisition of the Earth’s surface from space, that is, for methods exploiting a multiplicative, or contrast-based, injection model of spatial details extracted from the panchromatic (Pan) image into the interpolated multispectral (MS) bands. The path radiance should be estimated and subtracted from each band before the product by Pan is accomplished. Both empirical and model-based estimation techniques of MS path radiances are compared within the framework of optimized algorithms. Simulations carried out on two GeoEye-1 observations of the same agricultural landscape at different dates highlight that the de-hazing of MS before fusion is beneficial for an accurate detection of seasonal changes in the scene, as measured by the normalized differential vegetation index (NDVI).

Cancer cell lines are widely used as in vitro models of tumorigenesis, facilitating fundamental discoveries in cancer biology and translational medicine. Currently, there are few options for glioblastoma (GBM) treatment and limited in vitro models with accurate genomic and transcriptomic characterization. Here, a detailed characterization of a new GBM cell line, namely AHOL1, was conducted in order to fully characterize its molecular composition based on its copy number alteration (CNA) and transcriptome profiling, followed by the validation of key elements associated with GBM tumorigenesis. Large numbers of CNAs and differentially expressed genes (DEGs) were identified. CNAs were distributed throughout the genome, including gains at Xq11.1-q28, Xp22.33-p11.1, Xq21.1-q21.33, 4p15.1-p14, 8q23.2-q23.3 and losses at Yq11.21-q12, Yp11.31-p11.2 and 12p13.31 positions. Nine druggable genes were identified, including HCRTR2, ETV1, PTPRD, PRKX, STS, RPS6KA6, ZFY, USP9Y and KDM5D. By integrating DEGs and CNAs, we identified 57 overlapping genes enriched in fourteen pathways. Altered expression of several cancer-related candidates found in the DEGs-CNA dataset was confirmed by RT-qPCR. Taken together, this first comprehensive genomic and transcriptomic landscape of AHOL1 provides unique resources for further studies and identifies several druggable targets that may be useful for therapeutics and biologic and molecular investigation of GBM.

The majority of the phosphogypsum produced by a fertilizer plant in the Philippines is just stockpiled, which is considered a liability with no commercial prospects. It is important that we find use of this industrial waste by-product sooner than it becomes an environmental issue. Our study investigated the economic potential of the phosphogypsum by determining its rare earth elements (REE) composition. Phosphogypsum samples were collected from 2 m-depth trenches at 0.5 m intervals in 24 locations in the tailings ponds. ICPMS analysis of the phosphogypsum samples shows that the ponds have a mean Ʃ REE + Y concentrations of 266.15 mg kg^-1. The individual REE concentrations are within the world average concentrations in phosphogypsum, although there is relative depletion of Yb, Tb, and Tm. There are huge variations in REE concentrations between the ponds, likely because these are produced from the processing of more than ten types of exported phosphate rocks since the start of operation of the fertilizer plant in 1980s. The major REE abundance is in the order of Y (26 %) > Ce (25 %) > La (16 %) > Nd (15 %). There is an estimated 66 M USD worth of REE oxides in the phosphogypsum ponds with a potential added value of 3.3 to 6.6 M USD for 1 to 2 Mt phosphogypsum produced annually at 50 % recovery rate. This study provides a comprehensive REE concentration and economic analyses of Philippine phosphogypsum produced from different types of imported phosphate rocks for potential REE extraction.

Learning disorders (LD) are diagnosed in children impaired in the academic skills of reading, writing and/or mathematics. Children with LD usually show a slower resting-state electroencephalogram (EEG), with EEG patterns corresponding to a neurodevelopmental lag. LD-children also show a consistent cognitive impairment in working memory (WM), including an abnormal task-related EEG with an overall slower EEG activity of more delta and theta power, and less gamma activity in posterior sites; task-related EEG patterns considered indices of an inefficient neural resource management. Neurofeedback (NFB) treatments aimed at normalizing the resting-state EEG of LD-children have shown improvements in cognitive-behavioral indices and diminished EEG abnormalities. Given the typical findings of a WM impairment in LD-children; we aimed to explore the effects of a NFB treatment in the WM of children with LD, by analyzing the WM-related EEG power-spectrum. We recruited 18 children with LD (8-10 years old). They performed a Sternberg-type WM-task synchronized with an EEG of 19 leads (10-20 system) twice in pre-post treatment conditions. They went through either 30 sessions of a NFB treatment (NFB-group, n= 10); or through 30 sessions of a placebo-sham treatment (Sham-group, n= 8). We analyzed the before-after treatment group differences for the behavioral performance and the WM-related power-spectrum. The NFB group showed faster response times in the WM-task post-treatment. They also showed an increased gamma power at posterior sites and a decreased beta power. We explain these findings in terms of NFB improving the maintenance of memory representations coupled with a reduction of anxiety.

Resveratrol is one of the most investigated natural polyphenolic compounds and is contained in more than 70 types of plants and in red wine. The widespread interest in this polyphenol derives from its antioxidant, anti-inflammatory and anti-aging properties. Several studies have established that resveratrol regulates animal reproduction. However, the mechanisms of action and the potential therapeutic effects are still unclear. This review aims to clarify the role of resveratrol in the male and female reproductive functions, with a focus on animals of veterinary interest. In the female, resveratrol has been considered a phytoestrogen due to its capacity to modulate ovarian function and steroidogenesis via sirtuins, SIRT1, in particular. Resveratrol has also been used to enhance aged oocyte quality, and as a gametes cryo-protectant with mainly antioxidant, and anti-apoptotic effects. In the male, resveratrol enhanced testes function and spermatogenesis through activation of AMPK pathway. Furthermore, resveratrol has been supplemented to semen extenders improving the preservation of sperm quality. In conclusion, resveratrol has potentially beneficial effects for ameliorating ovarian and testes function. However, due to unclear data, further studies are necessary to consolidate these findings.

Dynamic laser speckle is applied as a reliable sensor of activity in all sort of material. Traditional applications are based on a time rate that is usually higher than 10 frames-per-second (FPS). Even in drying processes, where there is a high activity in the first moments after the painting and a slow activity after some minutes or hours, the process is based on the acquisition of images in a time rate that is the same in both moments of high and low activity. In this work, we present an alternative approach to follow the drying of paint and the other processes related to restauration of paintings that takes long-term to reduce the activity. We illuminated, using three different wavelength lasers, an accelerator (Cyclododecane) and a varnish used in restauration of paintings and monitor them at long-term drying using an alternative fps, comparing the results to the traditional method. The work also presents a way to do the monitoring using a portable equipment. The results present the feasibility to use the portable device and show the improvement in the sensitivity of the dynamic laser speckle to sense long-term process regarding the drying of Cyclododecane and Varnish used in restauration.

(1) Background/Objectives: Accurate determination of chronological age is crucial in legal dental identification. This study aimed to compare the effectiveness of different formulas in estimating the age of a Brazilian subpopulation by analyzing the pulp/tooth ratio of the maxillary canine and mandibular second premolar in panoramic and periapical radiographs. (2) Methods: The sample consisted of panoramic and periapical radiographs of 247 individuals. The file of each radiograph was opened in the Adobe Photoshop CS4® program to outline and obtain values in pixels for calculating the pulp/tooth ratio. Statistical analysis was conducted using the SPSS program, with a significance level set at 5%. (3) Results: The interclass correlation coefficient demonstrated excellent intra-observer agreement (0.990 – 0.999). The determination coefficients (R2) suggested that only 30-35% of the actual age results could be explained by the pulp/tooth ratio. Smallest differences were observed with Cameriere's formula for the mandibular second premolar on panoramic radiographs (+4.1 years). The greatest differences were found with the formulas for the mandibular second premolar in panoramic radiographs of the Korean (+12.5 years) and Portuguese (-12.1 years) populations. (4) Conclusions: The equations employed allowed for estimating the age of a Brazilian subpopulation and showed little agreement between the actual age and the estimated age.

This paper has the objective of implementing the radial rotor position control of a three-phase bearingless induction machine with split winding and optimized drive structure, using the ADRC technique. Because it is a multivariable, nonlinear, time-varying system with coupled variables, it is necessary to use advanced control strategies in order for the system to operate efficiently and with good dynamic performance. The ADRC controller considers the total disturbance composed of unmodeled dynamics, nonlinearities, uncertainties, and load variations, as a new system state, to be estimated in real-time through an extended state observer. In this mode, disturbances are compensated in real-time, eliminating regime errors and with good response to disturbances in general.

Cytomegalovirus (CMV) infection is the most common congenital infection worldwide, affecting between 0.7% and 1% of all live births. Approximately 11% of infected newborns are symptomatic at birth, and between 30% and 40% of these are at risk of developing long-term neurological sequelae. Until recently, the lack of an effective treatment did not justify universal testing of pregnant women. In recent years, however, valacyclovir at a dose of 8 g/day has been shown to be effective in preventing vertical transmission, and ganciclovir has been shown to be effective in preventing long-term sequelae in the treatment of symptomatic neonates. The aim of this article is to review congenital CMV infection, from its epidemiology to its treatment, using the most recent studies in the literature, and to help in the decision to modify protocols for universal testing of pregnant women according to the possibilities of each locality.

Despite the overall extension of the Amazon basin (approximately 6,000,000),which encompasses such a complex ecosystem and territories belonging to seven different nations, it is worth mentioning that environmental assessment related to changes in land use and land cover (LULC) in this region are often conducted respecting geopolitical boundaries associated with each country or taking into account the so-called Amazon biome. With the purpose of prospecting the intricate and hidden hydrological patterns, we undertake an in-depth evaluation of the water balance along the 2001-2021 time span across the whole basin, whose behavior depends on the features deriving from the metamorphoses in land use and land cover. To accomplish that task, the influence of the components of the water balance, namely rainfall and evapotranspiration, jointly with the terrestrial topographic mapping, are examined to investigate the interactions among the physical mechanisms that make up the hydrological cycle and the corresponding physical hydrological processes triggered by deforestation and reforestation in the region. More specifically, the modeling approach was rigorously designed to also consider, separately or not Negro, Solimões, Madeira, Tapajós and Xingu hydrographic sub-basins, which are the most important ones of the Amazon basin. The results highlight that, in the southern region of the Amazon, specifically within the Madeira river sub-basin, the lowest forest coverage is observed (56.0%), whereas in the northern Negro river sub-basin, the most notable forest coverage is observed (85.0%).The most preserved forest areas, such as the Negro and Solimões river sub-basins, with percentages of 81.9% and 74.2%, respectively, have higher annual rates of precipitation and evapotranspiration over time. On the other hand, regions that suffered the most intense deforestation along the time period studied, such as the Madeira, Tapajós and Xingu sub-basins, have lower annual rates of precipitation and evapotranspiration, with a preservation percentage of 54.6%, 62.6% and 70, 7%, respectively. As the pace of deforestation slowed between 2003 and 2013, annual precipitation rates increased by 12.0%, while evapotranspiration decreased by 2.0%. The hydrological findings of this paper highlight th predominant role of the forest in the context of the global water balance of the Amazon basin and the potential to also produce distinct impacts within different parts of the basin in terms of having more or less rainfall and evaporation. In addition, those variabilities in the hydrological operational components and mechanisms due to changes in land cover and land use also reveals the potential impacts that could be expected in the surrounding areas, closer or farther, notably beyond the limits of the Amazon basin.

This field study aimed to assess the base line conditions of a long-term polluted shooting range in Argentina polluted with 428 mg kg-1 lead (Pb), to evaluate the establishment and development of Helianthus petiolaris plants and address the efficacy of the phytomanagement strategy through: i) element accumulation in plant tissues; ii) rhizosphere bacterial diversity changes by Illumina Miseq™ and iii) floral water and essential oil yield, composition and element concentration by GC-MS and ICP. After one life cycle growing in the polluted sites, in the roots of Helianthus petiolaris plants Pb concentration was between 195 and 304 mg kg-1 Pb. Only a limited fraction of the Pb was translocated to the aerial parts. The predominance of the genus Serratia in the rhizosphere of Helianthus petiolaris plants cultivated in the polluted sites and the decrees of the essential oil yield were some effects significantly associated with soil Pb concentration. No detectable Pb concentration was found in the floral water and essential oil obtained. Extractable Pb concentration in the soil reduced between 28-45 % after the harvest.

In order to monitor the diversity of terrestrial biomes, the Earth Exploration Satellite Services demand a high data rate for downlink transmissions while sharing their frequency spectrum with, and suffering interferences from, cellular Base Stations. Both highlight the dilemmas of spectral efficiency (bps/Hz) and spectral coexistence. Our research aims to mitigate interference on low orbit satellite downlinks using Cognitive Radio (CR) and Adaptive MODulation and CODing (MODCOD) techniques. To fulfill this: 1) we present CR approaches to enhance spectrum exploitation. Next, 2) we detail Adaptive MODCOD (ACM) technique to increase RF power and spectral efficiencies. Then, 3) we suggest the solution by combining 1) and 2). Afterwards, 4) we analyze it by monitoring the signal to interference plus noise ratio and the CR/MODCOD strategy. Finally, 5) we provide case studies to demonstrate the strategy’s effectiveness through the practical operation of satellite services, and 6) we conduct a bench test of the communication system.

Synucleins are a family of small, soluble proteins mainly expressed in neural tissue and in certain tumors. Since their discovery, tens of thousands of scientific reports have been published about this family of proteins as they are associated to severe human diseases. Although the physiological function of these proteins still elusive, their relation with neurodegeneration and cancer was clearly described over the years. In this review, we summarize data connecting synucleins and cancer, going from the structural description of these molecules, to their involvement in tumor-related processes, and discuss the putative use of this proteins as cancer molecular biomarkers.

At the beginning of 2019, the petroleum crisis impacted many economies dependent on this industry. The Mexican government started programs to identify points and government officials involved in the gasoline stealing from PEMEX (Petróleos Mexicanos), the country’s leading government petroleum company. The programs consisted of supervising and monitoring the Mexican country network of gasoline ducts to detect points where gasoline was being stolen. Consequently, large urban regions faced a lack and shortage of gasoline. This situation generated several reactions in social media and many open data in news media. Although the government provided open data about stealing gasoline locations related to crimes, it did not analyze the collected data to identify patterns, insights, and the spatio-temporal characterization of this phenomenon. This paper presents a study to deal with the regional semantics described in the social media locations of gasoline stealing. Thus, a framework to discover the trends that emerge from social media and how it is correlated with the government’s open data is also presented—the proposed methodology used machine learning techniques based on linguistic and semantic technologies. The analysis was applied to a dataset of 24,317 geo-referenced tweets. The obtained results reflected the Mexican thinking opinion regarding discovered social topics, polarization maps, and regional insights. According to discovered trends, there were long fuel lines between 1.5 and 5 kilometers (on average) at fuel stations in different Mexican states.

Parallel manipulators with multiple end-effectors bring us interesting advantages over conventional parallel manipulators such as improved manipulability, workspace and avoidance of singularities. In this work the kinematics of a five-bar planar parallel manipulator equipped with two end-effectors is approached by means of the theory of screws. As an intermediate step the displacement analysis of the robot is also investigated. The input-output equations of velocity and acceleration are systematically obtained by resorting to reciprocal-screw theory. In that regard the Klein form of the Lie algebra se(3) of the Euclidean group SE(3) plays a central role. In order to exemplify the method of kinematic analysis, a case study is included. Furthermore, the numerical results obtained by means of the theory of screws are confirmed with the aid of special software like ADAMS.^TM

Background: to assess the benefit of a deep inspiration breath hold (DIBH) over standard irradiation technique, and eventually to identify anatomical and/or treatment preplanning characteristics correlated with LAD dose. Methods: We retrospectively identified patients with left-sided breast cancer who underwent whole breast radiotherapy in DIBH. All patients had both plans in DIBH and free-breathing (FB). Receiving operating characteristics (ROC analysis) were performed to define the cut-off point of parameters to predict LAD maximum dose >10 Gy and LAD mean dose > 4 Gy. Areas under the curve (AUCs) were calculated for all variables. Post-test probability has been calculated to evaluate advantage for parameters combination. Results: One hundred ninety-seven patients were identified. LAD dose was significantly reduced in DIBH plans with maximum and mean dose reduced by 31.7% (mean value 3.5 Gy vs 4.8 Gy, p=<0.001) and 28.1% (mean value 8.2 Gy vs 12.8 Gy, p=<0.001) in DIBH plans compared to FB plans. The strongest predictor of LAD maximum dose > 10 Gy and a LAD mean dose > 4 Gy was the minimum distance of LAD from tangent open fields. Other parameters were lung volume and heart volume for LAD Dmax > 10 Gy and lung volume, heart volume and breast separation for LAD Dmean > 4 Gy. Conclusion: The dosimetric benefit of DIBH is valid for all patients and DIBH should be preferred for all left sided patients.

We propose an advanced filtering scheme based on Recurrent Neural Networks (RNNs) and Deep Learning to enable efficient control strategies for Vertical Farming (VF) applications.  We demonstrate that the best RNN model incorporates five neuron layers, with the first and second containing ninety Long Short-Term Memory neurons.  The third layer implements one Gated Recurrent Units neuron.  The fourth segment incorporates one RNN network, while the output layer is designed by using a single neuron exhibiting a rectified linear activation function.  By utilizing this RNN digital filter, we introduce two variations: (1) A scaled RNN model to tune the filter to the signal of interest, and (2) A moving average filter to eliminate harmonic oscillations of the output waveforms. The RNN models are contrasted with conventional digital Butterworth, Chebyshev I, Chebyshev II, and Elliptic Infinite Impulse Response (IIR) configurations.  The RNN digital filtering schemes avoid introducing unwanted oscillations, which makes them more suitable for VF than their IIR counterparts.  Finally, by utilizing the advanced features of scaling of the RNN model, we demonstrate that the RNN digital filter can be pH selective, as opposed to conventional IIR filters.

Chromoblastomycosis (CBM) and phaeohyphomycosis (FEO) are infections caused by melanized filamentous fungal agents, primarily found in tropical and subtropical regions. Both infections pose significant challenges for the correct identification of the causative agent due to their morphological similarity, making conventional methods of morphological analysis highly subjective. Therefore, molecular techniques are necessary for the precise determination of these species. In this regard, this study aimed to contribute to a new methodology based on PCR-RFLP for the identification of agents causing CBM and FEO. Sequences from the ITS region were used to identify potential restriction enzyme sites in silico, followed by in vitro validation using the selected restriction enzymes. The obtained results were compared with species identification through morphological analyses and sequencing. The results demonstrated that the PCR-RFLP applied in this study accurately identified two major agents of chromoblastomycosis, Fonsecaea pedrosoi and Fonsecaea monophora, as well as Cladophialophora bantiana and Exophiala dermatitidis, both causative agents of phaeohyphomycosis. In this context, the proposed assay can complement current methods for identifying these species, aiding in diagnosis, and contributing to the proper management of these infections.

The main aim of this work is to present a step-by-step procedure to model and analyze the power loss distribution of three-level Gallium Nitride (GaN) inverters. It has been applied to three distinct three-phase three-levels voltage source inverters utilized in electric traction drives: Active Neutral Point Clamped, Neutral Point Clamped and T-Type Neutral Point Clamped. The proposed analytical power loss modelling, combined to an equivalent representation of the electrical machine demonstrated to be a viable solution to achieve a time-saving and low computational burden simulation platform, leading to satisfying accuracy results. This has been confirmed by comparing the results carried out from the simulations of a 110kW permanent magnet synchronous motor drive and those determined by considering a simplified circuital representation based on the proposed analytical power loss modelling.

The performance of modern wireless communication systems is highly dependent on the adoption of multiple antennas and the associated signal processing. In 5G and 6G networks, beamforming and beam management become challenging tasks due to aspects such as user mobility, increased number of antennas, and the adoption of higher frequencies. Artificial intelligence, and more specifically, machine learning, are efficient tools to reduce the complexity involved in generating beams and the overhead associated with beam management without sacrificing system performance. Therefore, AI-aided beamforming and beam management have received a lot of attention recently. This article presents a complete survey on this topic, emphasizing open problems and promising directions. The discussion includes architectural and signal processing aspects of modern beamforming and beam management. The article presents communication problems and respective solutions using centralized/decentralized, supervised/unsupervised, semi-supervised, active, federated, and reinforcement learning.

We study in detail the influence of different chemical potentials (baryon, charged, strange, and neutrino) on how and how fast a free gas of quarks in the zero-temperature limit reaches the conformal limit. We discuss the influence of non-zero masses, the inclusion of leptons, and different constraints, such as charge neutrality, zero-net strangeness, and fixed lepton fraction. We also investigate for the first time how the symmetry energy of the system under some of these conditions approaches the conformal limit. Finally, we briefly discuss what kind of corrections are expected from perturbative QCD as one goes away from the conformal limit.

Breast cancer-related lymphedema (BCRL) affects approximately 20% of women after breast cancer therapy. Advances in treatment have increased life expectancy, thus the prevalence of BCRL will continue to rise with the number of cancer survivors. Hence the need to develop strategies to prevent this condition. We provide a systematic review of the literature on primary prevention of BCRL by prophylactic lymphatic surgery (PLS). Between June and August 2022, we conducted a search of PubMed, Google Scholar and Cochrane. In the end a total of eighteen papers were selected. The eleven studies without a control group reported only 15 of 342 patients who developed lymphedema at least six months after PLS (4.59%). The seven studies with a control group included 569 patients, 328 cases and 241 controls. Among the cases, 36 (10%) developed lymphedema. In contrast, the incidence of lymphedema in controls was 40% (98 of 241 patients). Formulation of definite recommendations in favour of PLS is hindered by low-quality studies. There is no consensus on which technique should be preferred, nor on whether adjuvant radiotherapy might affect the efficacy of PLS. Randomized controlled trials are mandatory to conceive evidence-based recommendations.

MAPLE (matrix assisted pulsed laser evaporation) depositions of Candida Rugosa lipase were carried out from ice matrices whose composition is optimized in order to minimize conformational damage of the protein, which strongly influences its catalytic activity. To induce lid opening and to protect lipase during the MAPLE process, pentane and m-DOPA amino acid were added to the liquid matrix giving a target formed by a frozen water-lipase-pentane microemulsion. FTIR and AFM were used to investigate the structure of MAPLE deposited lipase films. The ability of MAPLE films to promote transesterification was determined by thin layer chromatography. It was shown that m-DOPA has influence on the aggregation but not on the unfolding of lipase induced by MAPLE, while the microemulsion formed by the addition of pentane to the target composition is effective in protecting lipase during the MAPLE process. MAPLE deposited lipases showed a modified specificity.

With the advancement of Additive Manufacturing and its applications in various industrial segments, it becomes increasingly important to investigate the processability parameters associated with nano-reinforcement. This study examines the influence of infill parameters, such as patterns (hexagonal, triangular and concentric), shape (solid and honeycomb) and concentrations by mass of Carbon Nanotubes (CNTs) at 1.0 wt% and 2.0 wt% on the mechanical compression properties of the 3D printed material. In this sense, nanocomposites based on Polylactic Acid (PLA) matrix nano-reinforced by CNTs were characterized using the Scanning Electron Microscopy -SEM, X-ray Diffraction, Raman Spectroscopy techniques and mechanical analysis. The mechanical properties of both the matrix and the nanocomposites were determined through mechanical compression tests, in accordance with [1]. SEM revealed compacted regions, voids, and detachment in the structures. XRD characterization indicated PLA predominantly amorphous nature, while CNTs exhibited characteristic diffractions of carbon nanotubes. Raman characterization showcased bands and characteristic vibrations of CNTs and PLA, nanocomposites' vibrational modes combine those of CNTs and PLA. Mechanical compression analysis indicates a direct influence of infill pattern, shape, and nano-reinforcement. The triangle pattern outperformed other patterns, exhibiting a 15.03% increase compared to concentric and 8.8% compared to hexagon infill. In nanocomposites, all showed higher compressive strength than the matrix. For PLA/1.0%CNTs, strength was 16.8%, and for PLA/2.0%CNTs, it reached 39.2%. In honeycomb shapes with infill variations, the triangular pattern excelled with a 0.97% increase over concentric and 6.12% over hexagon patterns. Honeycomb results indicate a 59.6% increase for (PLA/1.0%CNTs) and a 0.48% increase for (PLA/2.0%CNTs) compared to the matrix. This study highlights 3D printing parameters, emphasizing the effectiveness of the triangular pattern and the enhanced strength with the addition of CNTs, providing insights to enhance products manufactured through Additive Manufacturing.

This article describes the study and digital implementation of a system onboard a TMS 3208F28335 ® DSP for vector control of the bearing motor speed with 4 poles split winding with 250W of power. Smart techniques: ANFIS and Neural Networks were investigated and computationally implemented to evaluate the bearing motor performance under the following conditions: operating as an estimator of uncertain parameters and as a speed controller. Therefore, the MATLAB program and its toolbox were used for the simulations and the parameter adjustments involving the structure ANFIS (Adaptive-Network-Based Fuzzy Inference System) and simulations with the Neural Network. The simulated results showed a good performance for the two techniques applied differently: the estimator and a speed controller using both a model of the induction motor operating as a bearing motor. The experimental part for velocity vector control uses three control loops: current, radial position, and speed, where the configurations of the peripherals, that is, the interfaces or drivers for driving the bearing motor.

This article provides insight into flow measurement techniques in water injection wells in oil production fields, with a particular focus on the initial phases of operation. Consequently, the method created by Ramey in 1962, originally intended for estimating the temperature of the injection fluid, has been adapted to calculate the flow rate. In this technique, the calculation This procedure is based on the correlation between the thermal flux formed in the well. The discrepancy between the temperatures of the injected liquid and the geothermal temperature of the reservoir is the main source of the systematic errors in Ramey’s technique. To a lesser extent, but still significant, failure to observe the injection time in a fluid variation also results in an error problem that needs the failure to adhere to the scheduled injection time for a fluid alteration also yields a notable error dilemma that needs to be fixed. The reduction of listed systematic errors is the product of the main part of this article.

Background The operator's ability in performing carotid stenting (CAS) has improved clinical outcomes. However, more than 3% of patients need to be treated again after CAS. Most of the cases requiring further intervention are affected by hyperplasia. The recommended procedure is the DEBalloon. On the other hand, the literature reports a small number of carotid neoatherosclerosis cases and is recommended to be treated using elective Micronet-covered stent. Discriminating between the two types of in-stent-restenosis ISR (hyperplasia or neoatherosclerosis) is critical for a positive outcome.Case summary We describe a case in which a patient treated with carotid stenting 8 years before, was diagnosed with ISR. Due to the development of neurological symptoms and progressive increases in Peak Systolic Velocity (PSV) eight years following carotid stenting, a DEBalloon was used in a carotid in-stent-restenosis (ISR) standard procedure. About ten minutes after the procedure, the patient developed hemiplegia consistent with the treated carotid territory. The implantation of a MicroNet-covered stent excluded the thrombus and reverted symptoms with a normal MR control at 24 h. Conclusion This case illustrates that when in-stent stenosis evolves years after the stent implantation, neoatherosclerosis should be assessed, and a MicroNet-covered stent should be considered.

Glioblastoma (GBM) is the most common primitive tumor in adult central nervous system (CNS), classified as grade IV according to WHO 2016 classification. GBM shows a poor prognosis with an average survival of approximately 15 months, representing an extreme therapeutic challenge. One of its distinctive and aggressive features is aberrant angiogenesis, which drives tumor neovascularization, representing a promising candidate for molecular target therapy. Although several pre-clinical studies and clinical trials have shown promising results, anti-angiogenic drugs have not led to a significant improvement in overall survival (OS), suggesting the necessity of identifying novel therapeutic strategies. Metformin, an anti-hyperglycemic drug of the Biguanides family, used as first line treatment in Type 2 Diabetes Mellitus (T2DM), demonstrated in vitro and in vivo antitumoral efficacy in many different tumors, including GBM. From this evidence, a process of repurposing of the drug has begun, leading to the demonstration of the inhibition of various oncopromoter mechanisms and, consequently, to the identification of the molecular pathways involved. Here, we review and discuss the potential metformin’s antitumoral effects on GBM, inspecting if it could properly act as an anti-angiogenic compound to be considered as a safely add-on therapy in the treatment and management of GBM patients.

The critical systems, which the failure and malfunction may result in human, environment and financial severe damages, are essential components in various sectors and particularly in energy domains. Although unwished, integration error problems in supervision of critical systems occurs, incurring significant expenses because of operator’s subjective analysis and on hardware topology failures. In this work, a malleable model design approach is proposed to formulate and solve the integration error problem in the critical systems supervision in terms of reliability. A real Hybrid Power Plant (HPP) case is considered as a requirement for a study case with simulated data. A method framework with informal approach (C4 diagram) and formal approach (Hierarchical Coloured Petri Nets) in radial spectrum is applied to the HPP supervision design. Using formal methods, a formulation and solution to this problem through structured, scalable and compact mathematical representations are possible. This malleable model intends to guarantee functional correctness and then reliability of the plant supervision system based on system software architecture. Outcomes suggest corroboration that the malleable model is appropriate for energy domain, and can be used for other types of critical systems, bringing all the benefits of this methodology to the context in which it will be applied.

Understanding the role of invasive species in ecosystem functioning represents one of the main challenges in ecology. Pteridium aquilinum is a successful cosmopolitan invasive species with negative effects on the ecological mechanisms that allow secondary succession. In this study we evaluated whether P. aquilinum favours the establishment of alternative states, as well as the effect of recovery strategies on the secondary succession. A random stratified sampling was established with three treatments, each one with at least 50 year of fern invasion and with variations on the periodicity of fires and cuttings (chapeos) vs one control without fern bracken We determined the species richness and composition, as well as the relative importance value (IVI) in each treatment. We found that P. aquilinum decreases the action of the mechanisms that allow secondary succession, particularly facilitation. The recovery strategies consist in monthly cuttings and control fires allow to recover the secondary succession and eventually, the regeneration of areas invaded by P. aquilinum. Our study has relevant implications on the ecology of alternative state, and in practical strategies to maintain tropical forests, as well as for the maintenance of environmental services and sustainability.

Populational aging is marked by chronic non-communicable diseases, such as metabolic syndrome (MetS). IL-10 and IL-1β are pleiotropic cytokines with multiple biological effects linked to metabolic disorders. This cross-sectional study assessed 193 participants' IL-10 and IL-1β serum levels regarding their role in developing MetS, clinical characteristics, and their IL1B rs1143627 and IL10 rs1800890 variants' genotype frequencies in a population over 60. IL-10 levels correlated weakly with HDL levels and fat mass and inversely with triglycerides, glucose, glycated hemoglobin, and estimated average blood glucose levels. IL-10 levels were also indirectly influenced by the patient's T2DM duration, lean mass amount, and bone mineral content. Participants with altered HDL, elevated serum glucose, raised HbA1c levels, or those over 80 had reduced serum IL-10 levels compared to those with normal levels or other age groups, respectively. Women also had higher serum IL-10 levels than men. Dissimilarity, IL-1β levels correlated directly only with the number of total leukocytes and segmented neutrophils, showing only significant variations with self-reported alcohol consumption. Our study also found that those with the IL10 AA genotype (lower IL-10 levels) had a significantly higher risk of developing MetS. These findings may help direct future research and more targeted therapeutic approaches in older adults.

(1) Background: Retroareolar breast tumors are common, but they rarely progress to malignancy. This report presents a case of a 41-years-old woman with a superficial breast tumor, emphasizing the significance of considering a wide range of options when evaluating breast lumps. (2) Methods: The patient presented with a steadily growing, ulcerating superficial tumor in her left breast. To determine the nature of the tumor, a diagnostic assessment was conducted, which included a positron emission tomography (PET) scan and histological analysis. (3) Results: The diagnostic assessment confirmed the presence of a malignant Grade II superficial infiltrating ductal carcinoma. Following the diagnosis, the patient underwent a modified radical mastectomy under general anesthesia. Subsequently, she received four cycles of adjuvant chemotherapy, followed by taxol administrations. (5) Conclusions: This case report underscores the importance of conducting a thorough examination and maintaining a high index of suspicion for breast tumors. By documenting this case, the report contributes to the existing knowledge on various manifestations of breast cancer and highlights the necessity of early identification and aggressive treatment. This knowledge can be applied to identify and manage similar cases in the future, leading to improved patient outcomes.

Windthrow (i.e., trees broken and uprooted by wind) is a major natural disturbance in the Amazon. Images from medium-resolution optical satellites (mostly Landsat) combined with extensive field data have allowed researchers to assess patterns of tree mortality and monitor forest recovery over decades of subsequent succession in different regions. Although satellites with high spatial-resolution have become available for the Amazon in the last decade, they have not yet been employed for the mapping and quantification of windthrow tree-mortality. Here, we address how increasing the spatial resolution of satellites affects plot-to-landscape estimates of windthrow tree-mortality. We combined forest inventory data with Landsat 8 (30 m pixel), Sentinel 2 (10 m), and WorldView 2 (2 m) imagery over an old-growth forest in the Central Amazon that was disturbed by a single windthrow event in November/2015. Remote sensing estimates of tree mortality were produced with Spectral Mixture Analysis and analyzed together with forest inventory data using Generalized Linear Models. Windthrow tree-mortality measured in 3 transects (30 subplots) crossing the entire disturbance gradient was 26.9 ± 11.1% (mean ± 95% CI). Based on this ground truth, the three satellites produced reliable and statistically similar estimates (from 26.5% to 30.3% windthrow tree-mortality, p&lt;0.001). The mean-associated uncertainties decreased systematically with increasing spatial resolution (i.e., from Landsat 8 to Sentinel 2 and WorldView 2). However, the overall quality of fit of models showed the opposite pattern, which may reflect the influence of crown damage not accounted for in our field study, and fast-growing regeneration of leaf area. Among the satellites studied, Landsat 8 most accurately captured field observations of variations in tree mortality across the disturbance gradient (i.e., lower under- and/or overestimation from undisturbed to extremely damaged forest). Although satellites with high spatial-resolution can refine estimates of windthrow severity by allowing the quantification of individual tree damage and mortality, our results validate the reliability of Landsat imagery for assessing patterns of windthrow tree-mortality in dense and heterogeneous tropical forests. Although high-resolution imagery may improve estimates of tree damage and mortality, these should be validated using field data at compatible scales.

Every simplification has the potential to add a systematic error to the measured value. Sometimes, the addition does not render the measurement useless. In the case of oil well flow measurements based on the thermal properties of the fluid in the well, the addition of a systematic error of up to 20% can occur if the variation in the internal energy of the fluid and, most importantly, the transient nature of heat transfer in the completion are not taken into account. This error is a mathematical consequence of the simplifications chosen. To work within the first hours of good operation, given the need for immediate application in a prototype water injection well developed and installed at the UFRN, this article presents an analytical solution for calculating the flow rate by solving the differential equations obtained by applying the principles of mass and heat transfer. As a result, at the cost of greater complexity, the systematic error drops to values of less than 1% in the first two hours of operation of the well, as seen throughout this document.

Three-phase induction motors play a key role in industrial operations. However, their failure can result in serious operational problems. This study focuses on the early identification of faults through accurate diagnosis and classification of faults in three-phase induction motors, using artificial intelligence techniques, by analyzing current, temperature, and vibration signals. Experiments were conducted on a test bench, simulating real operating conditions, including stator phase unbalance, bearing damage and shaft unbalance. To classify the faults, an Auto-Regressive Neural Network with Exogenous Inputs (NARX) was developed. The parameters of this network were determined through a process of selecting the best network, using the scanning method with multiple training and validation iterations, with the introduction of new data. The results of these tests showed that the network had excellent generalization in all the situations evaluated, achieving the following accuracy rates: Motor without fault = 94.2%, Unbalance fault = 95%, Bearings with fault =98% and Stator with fault = 95%.

Type 2 diabetes (T2D) is a chronic systemic disease with a complex etiology, characterized by insulin resistance and mitochondrial dysfunction in various cell tissues. To explore this relationship, we conducted a secondary analysis of complete mtDNA sequences from 1,261 T2D patients and 1,105 control individuals. Our findings revealed significant associations between certain single nucleotide polymorphisms (SNPs) and T2D. Notably, the variants m.1438A>G (controls: 32 [27.6%], T2D: 84 [72.4%]; OR: 2.46; 95%CI: 1.64-3.78; p<0.001), m.14766C>T (controls: 498 [36.9%], T2D: 853 [63.1%]; OR: 2.57, 95%CI: 2.18-3.04, p<0.001), and m.16519T>C (controls: 363 [43.4%], T2D: 474 [56.6%]; OR: 1.24, 95%CI: 1.05-1.47, p=0.012) were significantly associated with diabetes probability. The variant m.16189T>C Previously reported in multiple studies in different populations, it was not found to be associated with T2D in our analysis (controls: 148 [13.39] T2D: 171 [13.56%]; OR: 1.03; 95%CI: 0.815-1.31,; p=0.83). These results provide evidence suggesting a link between some mtDNA polymorphisms and T2D, probably related to association rules and topological patterns and three-dimensional confirmation associated to regions where the changes are, rather than to point mutations in the sequence.

(1) Background: Inflammatory breast cancer (IBC) is a rare and aggressive form of breast cancer that poses unique management challenges. This review aims to synthesize the current literature on IBC, focusing on diagnosis, treatment, and prognosis, while highlighting recent advances and ongoing issues in patient management.; (2) Methods: We outline the typical clinical presentation and diagnostic criteria of IBC. Additionally, we detail the main therapeutic strategies, including neoadjuvant chemotherapy, surgery, radiation therapy, targeted therapies, hormonal therapies, and emerging treatments such as immunotherapy. The review is based on a comprehensive analysis of the existing literature.; (3) Results: Despite advancements in systemic therapy and a better understanding of IBC biology, the prognosis for patients with IBC remains poor. The overall survival rate has shown only marginal improvement over the past few decades. Future research directions, including the identification of novel biomarkers for early detection and personalized medicine strategies, are identified. The need for more high-quality clinical trials to address the challenges in IBC management is emphasized.; (4) Conclusions: Managing IBC is a complex task that necessitates multidisciplinary care and patient-centered communication. This review provides clinicians and researchers with a comprehensive overview of the current challenges and future directions in IBC management. The goal is to guide treatment decisions and inform further research, ultimately improving patient outcomes and prognosis.

Edible oils have commercial and nutritional value due to the presence of essential fatty acids. They can be consumed fresh in the form of capsules known as nutraceuticals. The quality of such products is of interest to the consumer. In this context, this study describes a method based on high resolution nuclear magnetic resonance (NMR) and Fourier transform mid-infrared spectroscopic analysis (FTIR), combined with statistical analyzes to differentiate different edible oils used as nutraceuticals in Brazil by fatty acid content. Through the analysis of 1H NMR spectra, the levels of saturated and unsaturated fatty acids in edible oils were characterized and quantified. Statistical analysis of the data confirmed the real distinction between nutraceutical raw materials, with emphasis on ω-9, ω-6 and ω-3 fatty acids. The analytical approach presented also demonstrated potential to identify the origin (animal or vegetable) of edible oils used as nutraceuticals.

This study explores an eco-friendly approach to synthesizing silver nanoparticles (AgNPs) using soybean leaf extracts, employing a reaction with silver nitrate at 65°C for 2.5 h. Optimal results were achieved at extract concentrations of 3.12 and 6.25 mg leaf mL-1, termed 3.12AgNP and 6.25AgNP, respectively. UV-Vis spectrophotometric analysis between 350-550 nm exhibited a peak at 410-430 nm, along with a color transition in the suspensions from pale yellow to brown, indicating successful synthesis. Dynamic light scattering (DLS) further delineated favorable properties of these AgNPs, including nanometric dimensions (73–104 nm), negative charge, and moderate polydispersity, portraying stable and reproducible synthesis reactions. The bioreduction mechanism, possibly expedited by leaf extract constituents such as amino acids, phenolic acids, and polysaccharides, remains to be fully elucidated. Notably, the study underscored the potent nematicidal effectiveness of the biosynthesized AgNPs, especially 6.25AgNP, against Pratylenchus brachyurus, a common plant parasitic nematode in tropical soybean cultivation regions. In vitro tests illustrated significant nematicidal activity at concentrations above 25 µmol L-1, while in vivo experiments displayed pronounced nematode population diminishment in plant roots, particularly with a 6.25AgNP rhizosphere application at concentrations of 500 µmol L-1 or twice at 250 µmol L-1, attaining a reproduction factor below 1 without any morphological nematode alterations. The research highlights the potential of 6.25AgNPs derived from soybean leaf extracts in forging sustainable nematicidal solutions, marking a significant stride towards eco-friendly phytonematode management in soybean cultivation. This novel methodology signals a promising avenue in harnessing botanical resources for nematode control, propelling a greener agricultural horizon.

In the frame of a broader project, we were interested at comparing the amino acid profile in a specific variety of onion, Rossa da inverno sel. Rojo Duro, produced in two different Italian sites: Cannara (Umbria region) and Imola (Emilia Romagna region). In both places, onions were cultivated and harvested in the same way, and irrigated by water sprinkler method. A further group of Cannara onions, growth by microirrigation, was also evaluated. After the extraction of free amino acid mixture from onion samples, an ion-pairing RP-HPLC method allowed the separation and the evaporative light scattering detection of almost all underivatized proteinogenic amino acids. However, only the peaks corresponding to Leu, Phe, Trp, were present in all the investigated samples and unaffected from matrix interfering peaks. The application of the beeswarm/box plots with the ANOVA/TukeyHSD statistical approach revealed a content of Leu and Phe markedly influenced by the geographical origin of the onions, while not by the irrigation procedure. The developed HPLC method was validated in terms of specificity, linearity, LOD and LOQ, accuracy and precision, before the quantitative assay of Leu, Phe and Trp in the onion samples. Although further studies are necessary, these preliminary findings can represent a good starting point for considering the quantity of specific amino acids in the Rossa da inverno sel. Rojo Duro variety as a fingerprint of its geographical origin. In principle, the developed approach might be applied to other onion varieties, thus contributing to their characterization and traceability, also contributing to limit commercial frauds.

Background and introduction: Lung cancer is a prevalent and deadly disease globally. Non-small cell lung cancer (NSCLC) is the most common subtype, comprising 85% of cases; Case report: A 65-year-old ex-smoker man presented to our facility with nocturnal cough. Various investigations revealed that he had metastatic NSCLC, for which he underwent chemotherapy with cisplatin and gemcitabine, followed by immunotherapy with Nivolumab. He achieved a complete response to the therapy and has remained free from recurrence for over 7 years since the initial diagnosis; Discussion and Conclusion: The treatment of metastatic NSCLC remains a significant therapeutic challenge, but the implementation of new therapeutic techniques has expanded the possibilities of achieving complete and durable eradication of the disease.

Background: After serious epidemics of chikungunya (CHIKV) and Zika (ZIKV) in the Americas, dengue (DENV) have reemerged in most countries. We analyzed the incidence, incidence rates, and evolution of DENV cases in Honduras from 2015-2018 and the ongoing 2019 epidemic. Methods: Using epidemiological weeks (EW) surveillance data on the DENV in Honduras, we estimated incidence rates (cases/100,000 population), and developed maps at national, departmental, and municipal levels. Results: From 1 January 2016 to 21 July 2019, a total of 109,557 cases of DENV were reported, 28,603 in 2019, for an incidence rate of 312.32 cases/100,000 pop this year; 0.13% laboratory-confirmed. The highest peak was reached on the EW 28°, 2019 (5,299 cases; 57.89 cases/100,000 pop). The department with the highest number of cases and incidence rate was Cortes (8,404 cases, 479.68 cases/100,000 pop in 2019). Discussion: The pattern and evolution of DENV epidemic in 2019 in Honduras has been similar to that which occurred for in 2015. As previously reported, this epidemic involved the north and central areas of the country predominantly, reaching municipality incidences there >1,000 cases/100,000 pop (1%). Studies using geographical information systems linked with clinical disease characteristics are necessary to attain accurate epidemiological data for public health systems. Such information is also useful for assessment of risk for travelers who visit specific areas in a destination country.

In the semi-arid region of Brazil, it is common to use saline or brackish water for crop production. However, this practice can negatively affect the soil, nutrient balance, and fruit quality and production. From this perspective, this study aimed to evaluate the effect of fertilization combinations with nitrogen (N), phosphorus (P), and potassium (K) on the production and quality of West Indian cherry grown under salt stress in the second year of production. The study was conducted in a protected environment following a randomized block design with treatments distributed in a 2 x 10 factorial arrangement referring to two levels of electrical conductivity of irrigation water (ECw) (0.6 and 4.0 dS m-1) and 10 NPK fertilization combinations (80-100-100; 100-100-100; 120-100-100; 140-100-100; 100-80-100; 100-120-100; 100-140-100; 100-100-80; 100-100-120 e 100-100-140% of the recommendation in the second year of production), with three replicates and one plant per lysimeter. The results indicate that irrigation of West Indian cherry crop irrigation at the water salinity of 4.0 dS m-1 negatively affected all fruit production variables. The interaction between the ECw of 0.6 dS m-1 and the 100-80-120 NPK fertilization combination increased the total number of fruits and the total fruit weight of West Indian cherry.

Background and Objectives: The aim of this study is to investigate the diagnostic-therapeutic prob-lem of pelvic recurrence of rectum cancer, highlighting current surgical standards and the possi-ble role of the minimally invasive approach. This retrospective analysis of our surgical case study wishes to enter this debate while suggesting a possible line of action, based on the site of recur-rence. Materials and Methods: We examined, retrospectively, all the patients diagnosed, between 2008 and 2018, with cancer of the rectum at the "Pietro Valdoni" Department of Surgery and monitored their follow-up for 5 years. The sample consisted of 368 patients with rectal neoplasm, 136 females and 232 males, with an average age of 65.8 (ranging from 37 to 86). In 103 of the cases, the neo-plasm was located in the upper rectum (28%), in 119 cases in the middle rectum (32.3%), in 102 cases in the lower rectum (27.7%), in 31 cases (8.4%) at the level of the right/sigma junction and in 13 cases it was not possible to define the site with certainty (3.5%). Results: We examined all patients diagnosed with cancer of the rectum between 2008 and 2018 at the "Pietro Valdoni" Department of Surgery retrospectively and monitored their follow-up for 5 years. The sample consists of 368 patients with rectal neoplasm, 136 females and 232 males. Conclusions: The discussion remains open as to which approach is best at surgical level, whether laparoscopic, robotic or open-air. Our experience informs us that the most dangerous site remains on the anastomotic site.

The Biginelli reaction is a highly versatile reaction, which leads to dihydropyrimidinones/thiones. This scaffold is reported as being a privileged structure due to its ability to interact with biological targets. Synthesis of ethyl 4-(2-fluorophenyl)-6-methyl-2-thioxo-1-(p-tolyl)-1,2,3,4-tetrahydropyrimidine-5-carboxylate was achieved through the Biginelli reaction using a functionalized thiourea. In silico studies demonstrated that the compound title showed good potential for interacting with ecto-5’-nucleotidase, which has been considered as a target in designs for anti-cancer drugs.