Deep-Brain Stimulation (DBS) is a a highly effective and safe medical treatment that improves the lives of patients with a wide range of neurological and psychiatric deceases, and has been consolidated as a first-line tool in the treatment of these conditionsin the last two decades. Closed Loop Deep-Brain Stimulation (CLDBS) pushes this tool further by automatically adjusting the stimulation parameters to the brain response in real time. In this context, this paper presents a Low-Noise Amplifier (LNA) and a Neurostimulator circuits fabricated in the low-power/low-voltage 65 nm CMOS process from the TSMC, which were designed targeting implantable applications. To achieve the best trade-off between input-referred noise and power consuption, metaheuristic algorithms were employed to determine and optimizes the dimentions of the LNA devices during the design phase. The measurement results showed that the LNA had a gain of 40.6 dB, a 3 dB bandwidth spanning over three decades from 10 Hz to 8.6 kHz, and a power consumption of 6.19 uW. Simulations results indicated an input-referred noise of 4.86 uVrms for the LNA. The circuit of the Neurostimulator is a programmable Howland Current-Pump, whose measurements showed its ability to generate currents with arbitrary shapes ranging from between 325 uA to +318 uA. The simulations showed a quiescent power consumption of 0.13 W with a zero neurostimulation current. The LNA and the Neurostimulator circuits are supplied with 1.2 V voltage and occupy a microdevice area of 145 um x 311 um and 88 um x 89 um, respectively, making them suitable for implantation in applications involving Closed Loop Deep-Brain Stimulation.

This study aimed to investigate Coll-I, III, IV and elastin in canine normal prostate and PC, using Picrosirius red (PSR) and Immunohistochemical (IHC) analysis. Eight normal prostates and 10 PC from formalin-fixed, paraffin-embedded samples were used. Collagen fibers area was analyzed with ImageJ software. The distribution of Coll-I and Coll-III was approximately 80% around prostatic ducts and acini, 15% among smooth muscle and 5% surrounding blood vessels, in both normal prostate and PC. There was a higher median area of Coll-III in PC, when compared to normal prostatic tissue (p=0.001 for PSR and p= 0.05 for IHC). Immunostaining for Coll-IV was observed in the basal membrane of prostate acini, smooth muscle, blood vessels, and nerve fibers of normal and PC samples. Although there was no difference in Coll-IV area between normal tissue and PC, tumors with Gleason score 10 showed absence of Coll-IV, when compared to scores 6 and 8 (p=0.0095). Elastic fibers were found in the septa dividing the lobules and around the prostatic acini of normal samples, and was statistically higher in PC, compared to normal tissue (p=0.00229). Investigation of ECM components brings new information and should be correlated with prognosis in future studies.

Drying food involves complex physical atmospheric mechanisms with non-linear relations from the air-food interactions and those relations are strongly dependent on the moisture contents and the type of food. Such dependence makes it complex to design suitable dryers dedicated to a single drying process. To streamline the design of a novel compact food-drying machine, a heat pump dryer component design optimization algorithm was developed as a subprogram of a Computer Aided Engineering tool. The algorithm requires inputting food and air properties, the volume of the drying container and the technical specifications of the heat-pump off-the shelf components. The heat required to dehumidify the food supplied by the heat exchange process from condenser to evaporator, and the compressor’s requirements (refrigerant mass flow rate and operating pressures) are then calculated. Compressors can then be selected based in the volume and type of food to be dried. The algorithm is shown via a flow chart to guide the user through 3 different stages: Changes in drying air properties, Heat flow within dryer and Product moisture content. Example results of how different compressors are selected for different type of produces and quantities (Agaricus Blazei mushroom with 3 different moisture contents or fish from Thunnini tribe) conclude this article.

Arylamine N-acetyltransferases (NATs) are cytosolic enzymes, highly polymorphic, present in both eukaryotes and prokaryotes. These enzymes play an important role in the detoxification and activation of xenobiotics as well as in the synthesis of endogenous compounds. Specific NATs have been pointed out in the literature as possible therapeutic targets. In particular, the human NAT1, for the treatment of certain cancers, and the NAT from M. tuberculosis (TBNAT), for the treatment of tuberculosis. This paper describes an in silico approach to prospect and select potentially inhibitors of NAT1 and TBNAT from the Traditional Chinese Medicine (TCM) using free available tools. A library with ligands from TCM was previously screened in order to select only compounds with optimal pharmacological properties. The affinity of the selected ligands with respect to NAT enzymes was then evaluated by virtual screening (VS). Subsequently, the complexes with the best ligands were submitted to molecular dynamics (MD) simulations aiming to obtain better quality information on affinity and selectivity. The results for one specific ligand, ZINC14690579, indicated its potential for affinity and selectivity. ZINC14690579 structure may represent the discovery of a new scaffold for future development of NAT inhibitors.

Climate changes caused by anthropogenic actions can directly and indirectly affect living beings, including parasites and their hosts. Changes such as water temperature, pH, distribution of nutrients in the aquatic environment are some examples that can interfere with the fish community, whether in open water or in production systems. In this review, we will show how climate change can affect the adaptation of hosts and parasites in the aquatic environment and how these parasites can be used for environmental monitoring.

The new Internet of Things (IoT) applications are enabling the development of projects that help monitoring people with different diseases in their daily lives. Alzheimer’s is a disease that affects neurological functions and needs support to maintain maximum independence and security of patients during this stage of life, as the cure and reversal of symptoms have not yet been discovered. The IoT-based monitoring system provides the caregivers’ support in monitoring people with Alzheimer’s Disease (AD). This paper presents an ontology-based computational model which receives physiological data from external IoT applications, allowing to identify of potentially dangerous behaviors for patients with AD. The main scientific contribution of this work is the specification of a model focusing on Alzheimer’s disease using the analysis of Context Histories and Context Prediction, which considering the state of the art, it is the only one that uses analysis of Context Histories to perform predictions. The research also proposes a simulator to generate activities of the daily life of patients allowing the creation of datasets. These datasets were used to evaluate the contributions of the model and were generated according to the standardization of the ontology. The simulator generated 1025 scenarios applied to guide the predictions, which achieved average accurary of 97.44%. The experiments also allowed the learning of 20 relevant lessons on technological, medical and methodological aspects of DCARE that are recorded in this article.

Antisepsis of the hands of medical personnel is one of the most important steps in the process of patient care, since direct contact can cause the cross-transfer of potentially pathogenic microorganisms at surgical sites.This study aimed to analyze the prevalence of microorganisms on the hands of 131 surgeons in a university hospital before the surgical procedure. Swabs were collected from each clinician's hands before and after handwashing. The samples were placed in a transport medium and immediately delivered to a private Clinical Analysis Laboratory from São Luis-Maranhão. The microorganisms were identified by ionization source mass spectrometry and matrix-assisted laser desorption (MALDI-TOF), and antibiotic susceptibility tests (AST) were performed using the Vitek2 automated system. The results showed a high frequency (100%) of microorganisms before handwashing, but after surgical antisepsis, the rate dropped significantly (p<0.05) to 27.5%. Gram-positive cocci and rods were the most common microbes, followed by gram-negative bacilli species. The effectiveness of hand antisepsis was 72.5%. The ideal would be 100% efficacy, that is, 0% microorganisms in all surgeons. It is logical that the presence of any organism, no matter how infrequent it may be, will always represent a great risk of postoperative infection for any patient.

With a worldwide growing concern for greenhouse gas (GHG) emissions and their impact on human health and the environment, transportation has become a central theme in mitigation, responsible for 14% of human GHG emissions. To build endurance to climate change, transportation services must adapt to the current scenario and act quickly to avert future changes. Deeply rooted changes in socio-technical systems will be necessary to achieve significant CO2 reduction and secure the well-being of future generations. This study's objective is to comprehensively review the current state of carbon mitigation in the transportation sector. This is done through a systematic literature review engrained in the socio-technical transition theory and the structural theory of contingency. Twenty-six review papers covering 2,983 original articles are selected for full-text examination concerning carbon emissions in transportation. Enablers, barriers, benefits, disadvantages and metrics in carbon emissions reduction are identified, and a comprehensive framework is built. Results provide a view of the current sustainability scenario in transportation and allow a better understanding of the factors influencing carbon emission initiatives in transportation and its outcomes.

Diabetes is a prevalent global health issue associated with significant morbidity and mortality. Diabetic retinopathy (DR) is a well-known inflammatory, neurovascular complication of diabetes and a leading cause of preventable blindness in developed countries among working-age adults. However, the ocular surface components of diabetic eyes are also at risk of damage due to uncontrolled diabetes, which is often overlooked. Inflammatory changes in the corneas of diabetic patients indicate that inflammation plays a significant role in diabetic complications, much like in DR. The eye´s immune privilege restricts immune and inflammatory responses, and the cornea and retina have a complex network of innate immune cells that maintain immune homeostasis. Nevertheless, low-grade inflammation in diabetes contributes to immune dysregulation. This article aims to provide an overview and discussion of how diabetes affects the ocular immune system’s main components, immune-competent cells, and inflammatory mediators. By understanding these effects, potential interventions and treatments may be developed to improve the ocular health of diabetic patients.

Immediate load of full-arch rehabilitations over implants, specially over 4 implants are very well documented in the literature. More recently, the use of computed surgical guides to help the planning and the execution of these treatments, in many situations without the need of raising a flap, and diminishing the appearance of hematomas, bleeding and with less trauma to the patient has gained preference among implantologists. The objective of this case report is to show a clinical case of an immediate load full-arch fixed rehabilitation over 4 implants produced by 3D printing manufacturing technology, and placed with a computed surgical guide, in the same appointment, and the 24 months follow-up. The patient returned after 3 months to replace the immediate temporary fixed prosthesis for a new one, with metallic bar, better teeth and more delicate. Soft and hard tissue around the implants seemed to be stable, without signs of inflammation, either on the 3 or the 24 months follow-up. 3D printing of implants by direct metal laser sintering is a technology that seems to be promising for oral implantology, with solid studies showing reliable results, as seen in this single case. More clinical studies are necessary to testify its efficacy.

Mammary neoplasm affects a population of intact and elderly female dogs and 50% are malignant. In order to study this disease, cell culture is as a promising preclinical model, creating the opportunity to deposit cell lines at a cell bank, allowing a great reproducibility of the assays and making the validation of the results more reliable. Another important aspect is the possibility to establish models for better understanding tumour characteristics, such as vasculogenic mimicry. Due the importance of cancer cell lines in preclinical models, this study aimed to establish and characterize primary cell lines from canine mammary gland tumours according to immunophenotype and tumorigenicity, and with its ability to form vasculogenic mimicry-like structures in vitro and in vivo. Cell cultures were evaluated for morphology, phenotype, vasculogenic mimicry and tumorigenicity abilities. We collected 17 primary mammary carcinoma and 3 metastasis and had a satisfactory result in 10 of them. All cell lines presented spindle shape or polygonal morphology and expressed concomitant pan-cytokeratin and cytokeratin 8/18. Four cell lines had vasculogenic mimicry ability in vitro and two of them showed in vivo tumorigenic potential and forming VM in the xenotransplant tumour. Cell characterization of those lines will help to create a database for more knowledge of mammary carcinomas in dogs, including studies of tumour behaviour and new therapeutic targets.

Rare diseases are characterized by a wide diversity of signs and symptoms and vary not only from disease to disease, but also from person to person, and living with a disease leads patients to peculiar experiences and treatments, without limits of time and space, as they extend to various environments and relationships of their lives. The objective of this study is the theoretical interaction between Value Co-creation (VC) and the Stakeholder Theory (ST) with the Shared Decision Making (SDM) health care theory. It is configured as a multiparadigmatic proposal by enabling the analysis of multiple perspectives of different stakeholders in health care. Thus, Co-created Decision Making (CDM) emerges in a logic dominated by service, with emphasis on intangible aspects and the interactivity of the relationships. It goes beyond the clinical office and the doctor-patient relationships, as studied in SDM, extending to all environments and interactions that add value to the patient's treatment. It was concluded that the essence of this new theory proposed here is neither in patient-centered care nor in patient self-care, but in co-created relationships with and between stakeholders in both directions, including non-health care environments that are important to the patient, such as relationships with friends, family, other patients with the same disease, social media, public policies, and the practice of pleasurable activities.

The vision can be used to recognize images and to improve mental pictures of environments. Visually impaired people feel a lack of aid for their independent or facilitated urban mobility, which can be achieved with the use of mobile devices and cartographic tools using audiovisual outputs. This work raises issues about urban mobility for the accessibility of visually impaired people in areas still unexplored by them, it uses cartographic technologies in electronic devices. For a preview of the test area located in Monte Carmelo (MG), a tactile model was used to form the first image of the eight volunteers. Results were obtained through research with not blind and blind individuals, it validated the use of áreas’s mobile registration prototype positioning in field or not, when the coordinates from the objects are known for registration. The results indicate that both the tactile model and the audiovisual prototype can be used by blind and non-blind people. Above all, the prototype proved to be a viable and adequate option for decision making in urban environments. New ways of presenting data to blind or otherwise blind people can still be studied.

3D printing with earth-based mortar is still under development and faces challenges. Optimizing the mortar mixture, improving structural strength, determining the relationship between printing speed and the amount of extruded material, and ensuring long-term durability are areas that are still being refined. Additionally, regulatory and certification issues must also be considered to ensure the safety and compliance of 3D printed structures. This paper presents for discussion the records, analyses, studies, and considerations regarding the initial initiatives involving 3D printing with the extrusion of earth-based mortar developed at the Faculty of Engineering of the University of Porto - FEUP. Through this work, it is possible to strengthen and reaffirm that 3D printing with earth-based mortar has significant potential in the construction industry and that the incorporation of dispersed kraft paper fibres from the recycling of cement bags is an excellent resource to achieve good constructability in 3D printing with earth-based mortar.

The COVID-19 pandemic crisis has brought about unprecedented economic and social consequences worldwide. The implementation of isolation measures, including national and international travel restrictions, significantly affected contact-intensive sectors such as tourism. During this lockdown period, Information and Communication Technology (ICT) was crucial in maintaining connectivity and enabling remote activities. Governments across the world implemented discretionary measures to mitigate the crisis's adverse effects on economic activity. This paper aims to analyze whether the level of ICT adoption and the importance of tourism influence the fiscal policy efforts pursued by governments. Based on the results of a linear regression analysis for 154 countries, the findings suggest that in countries with higher international tourism receipts, the governments had to promote higher fiscal stimulus. At the same time, ICT development diminished the efforts of the fiscal policy response to the crisis since it facilitated economic resilience. The findings of this study can contribute to understanding how governments responded to the pandemic crisis and the factors that influenced their fiscal policy decisions.

Many contaminant yeast strains able to survive inside fuel ethanol industrial vats show detrimental cell surface phenotypes, such as filamentation, invasive growth, flocculation, biofilm formation and excessive foam production. Previous studies have linked some of these phenotypes to the expression of FLO genes, and the presence of gene length polymorphisms causing the expansion of FLO gene size appears to result in stronger flocculation and biofilm formation phenotypes. We have performed here a molecular analysis of FLO1 and FLO11 gene polymorphisms present in contaminant strains of S. cerevisae from Brazilian fuel ethanol distilleries showing strong foaming phenotypes during fermentation. The size variability of these genes was correlated with cellular hydrophobicity, flocculation and highly foaming phenotypes in these yeast strains. Our results also show that deleting the major activator of FLO genes (the FLO8 gene) from the genome of a contaminant and highly foaming industrial strain avoids problematic foam formation, flocculation, invasive growth and biofilm production by the engineered (flo8∆::BleR / flo8Δ::kanMX) yeast strain. Thus, the characterization of highly foaming yeasts and the influence of FLO8 in this phenotype opens new perspectives for yeast strain engineering and optimization in the sugarcane fuel-ethanol industry.

This study aimed to compare three different extracts of Saco sweet cherry, namely non-coloured fraction, coloured fraction and total extract concerning phenolic composition, antioxidant and antidiabetic potential, erythrocytes’ protection and effects on Caco-2 cells. A total of 22 phenolic compounds were identified by LC-DAD. Hydroxycinnamic acids were the most predominant in both non-coloured fraction and total extract, while cyanidin-3-O-rutinoside was the main anthocyanin found in the coloured fraction. The total extract was the most effective against DPPH, nitric oxide and superoxide radicals, and in the inhibition of α-glucosidase enzyme. Finally, the protective effect of the extracts to prevent oxidative damage in human erythrocytes was assessed. The coloured fraction revealed the best activity against hemoglobin oxidation and hemolysis. Regarding to Caco-2 cells, the coloured extract exhibited the most cytotoxic effects, while the total extract was the most efficient in protecting these cells against oxidative damage induced by t-BHP.

Live streaming conferences increase the participation of a diverse audience, help defray travel costs and overcome problems related to travel restrictions. In this article, we lay out tips for implementing live-streaming in scientific meetings. We also cover legal, ethical, and technical aspects implicated with live-streaming scientific talks. To write this article, we leveraged knowledge from our experience in organizing the symposium “Deciphering the Denisovans,” presented at the 88th Annual Meeting of the American Association of Physical Anthropology (AAPA) in Cleveland, OH, in 2019, as well as literature on the topic.

Enterococcus faecalis is a bacterium that can develop a multidrug resistance profile associated with the community as well as nosocomial-acquired infections. Among the treatment options for these infections are aminoglycosides combined with bacterial cell wall inhibitors such as beta-lactams, since E. faecalis is intrinsically resistant to aminoglycosides. One of its most representative resistance mechanisms is the expression of aminoglycoside-modifying enzymes, such as the aminoglycoside phosphotransferase type IIIa of E. faecalis (EfAPH(3')-IIIa). This enzyme acts by phosphorylating aminoglycosides in an ATP-dependent reaction, modifying the 3' position of hydroxyl groups of these antibiotics. Considering this scenario, 3,092 natural products obtained from the ZINC22 database were analyzed to select molecules with the highest affinity for the nucleotide-binding pocket of EfAPH(3')-IIIa, which could be potential aminoglycoside adjuvants. The molecules that showed the best-score results obtained from ensemble docking-based virtual screening were ZINC000000952700 (BS-1), ZINC000014793040 (BS-2) and ZINC000015498603 (BS-3). The most promising results were for BS-2, a flavone derivative, due to its improved stability profile in molecular dynamics simulation (average values of RMSD of 0.23 nm, and Rg of 1.94 nm), binding free energy calculations (average ΔG total of -35.3 nm), as well as better toxicological profile (lower probability of hepatotoxicity, carcinogenic, immunotoxicity, mutagenicity, and cytotoxicity effects), compared to BS-1 and BS-3. These results allow us to propose that a flavone derivative may act as an adjuvant to aminoglycosides in the treatment of E. faecalis infections, acting as an inhibitor in the nucleotide-binding pocket of EfAPH(3')-IIIa.

Fusarium wilt caused by Fusarium oxysporum f. sp. cubense (Foc) is one of the most destructive diseases in banana farming worldwide. Knowledge of the factors of genetic diversity and virulence of the pathogen contributes to the development of resistant cultivars and in management strategies based on exclusion. In this study, phenotypic traits such as virulence and aggressiveness in a sample of 52 Foc isolates, were analyzed and their relationship to the presence of putative effectors of gene SIX (Secreted in Xylem) pathogenicity homologues, verified. According to the dissimilarity matrix, there were three isolates closest to the standard Foc race 1 strain. Isolates 229A and 218A, were selected according to their aggressiveness profile in 'Grand Naine' and 'Prata-Anã', respectively, I order to replace the standard isolate of race 1 in the resistance screening process carried out by the breeding program. Two homologues of the SIX8 gene, SIX8a and SIX8b, are present in isolates of Foc from Brazil and the SIX8b gene correlates with avirulence in the cultivar ‘Grand Naine’ (Cavendish). These results are important to support the banana genetic breeding program by identification of sources of resistance to Foc and contribute in the establishment of the function of SIX effector proteins.

In South Sudan, three case-control studies found a positive association between Nodding Syn-drome (NS) and a Mansonella perstans infection. To investigate whether M. perstans could play the primary and sole causal role in the development of NS, we examined blood films of persons with and without epilepsy in rural villages affected by NS in Mahenge, Tanzania, to identify M. perstans infections. Study participants were also examined for onchocercal nodules and skin lesions and tested for the presence of anti-O. volvulus antibodies (Ov16 ELISA). One hundred and thirteen epilepsy cases and 132 controls were enrolled, with a mean age of 28.3 years (interquartile range 22 – 34 years); 125 (51%) were females. Of the persons with epilepsy, 43 (38.1%) met the probable NS criteria. M. perstans infection was absent in all participants, but Ov16 prevalence and oncho-cerciasis-associated skin manifestations were positively associated with epilepsy, including probable NS. Onchocercal nodules in the mothers of cases were also positively associated with epilepsy. In conclusion, in contrast with O. volvulus, M. perstans is likely not endemic in Mahenge and therefore cannot be a co-factor for NS in the area. Hence, this filaria cannot be the primary and sole causal factor in the development of NS.

In Brazil, the production of corn and soybeans has been growing significantly in recent years. Considering that the strategies for investing in the production of these crops are conditioned by production costs and risk, the objective of this article is to propose a simulation model that indicates the trend of production costs for these commodities, considering the dispersion and correlation of selected key variable prices and corn and soybean production costs practiced between the years of 2018 and 2022. Fifty specialized companies in the state of Sao Paulo, Brazil, provided data for this study, and Monte Carlo simulations showed that the total cost of corn production/ha is between USD 600.00 and USD 1150.00, with a level of certainty of 84.7%, and soybeans are in the range of USD 260.00 to USD 420.00, with a level of certainty of 86.4%. The model evidenced a trend of decreasing production costs for the crops for the 2023/24 and 2024/25 harvests, as the input with the greatest impact (fertilizer) is showing a downward trend. On the other hand, costs related to labor, soybean seed, and fungicides are showing an upward trend, while dolomitic limestone corrective remains stable.

The data-oriented paradigm has proven to be fundamental for the technological transformation process that characterizes Industry 4.0 (I4.0) so that Big Data & Analytics is considered a technological pillar of this process. The literature reports a series of system architecture proposals that seek to implement the so-called Smart Factory, which is primarily data-driven. Many of these proposals treat data storage solutions as mere entities that support the architecture's functionalities. However, choosing which logical data model to use can significantly affect the performance of the architecture. This work identifies the advantages and disadvantages of relational (SQL) and non-relational (NoSQL) data models for I4.0, taking into account the nature of the data in this process. The characterization of data in the context of I4.0 is based on the five dimensions of Big Data and a standardized format for representing information of assets in the virtual world, the Asset Administration Shell. This work allows identifying appropriate transactional properties and logical data models according to the volume, variety, velocity, veracity, and value of the data. In this way, it is possible to describe the suitability of SQL and NoSQL databases for different scenarios within I4.0.

Student-centered active learning (SCAL) shifts the focus from the teacher to the student. Implementing SCAL requires the development of new forms of assessment beyond memorization and comprehension. This paper aims to demonstrate the effectiveness of SCAL by analyzing student performance at different cognitive levels. In flipped classrooms, students completed tasks with varying cognitive demands. The tests measured knowledge (level 1), comprehension (level 2), application (level 3) and analysis (level 4). This approach to assessment assesses not only the acquisition of content, but also skills that are critical to a health science student's future career. The results of expository learning were compared with student-centered collaborative learning in the Anatomy and Embryology I course over three academic years. Student opinions were collected through 326 anonymous Wooclap® surveys. No differences in performance were found for low cognitive level questions. However, SCAL significantly improved performance on higher cognitive level questions that required problem solving and application of knowledge. Despite the benefits of SCAL, it requires more effort from both teachers and students. The current assessment system, which measures the quality of teaching, penalizes this effort and requires teachers to believe strongly in the effectiveness of SCAL.

Hydrogen peroxide (H2O2) is an essential analyte for detecting neurodegenerative diseases and in-flammatory processes and plays a crucial role in pharmaceutical, food industry, and environmental monitoring. However, conventional H2O2 detection methods have drawbacks such as lengthy analysis time, high costs, and bulky equipment. Non-enzymatic sensors have emerged as promising alternatives to overcome these limitations. In this study, we introduce a simple, portable, and cost-effective non-enzymatic electrochemical sensor based on carbon black (CB) and silver nano-particle-modified δ-FeOOH (Ag/δ-FeOOH), integrated into a disposable electrochemical cell (DCell). Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and electrochemical impedance spectroscopy (EIS), confirmed successful CB and Ag/δ-FeOOH immo-bilization on the DCell working electrode. Electrochemical investigations revealed that the DCell-CB//Ag/δ-FeOOH sensor exhibited an approximately twofold higher apparent heterogene-ous electron transfer rate constant than the DCell–Ag/δ-FeOOH sensor, capitalizing on CB ad-vantages. Moreover, the sensor displayed excellent electrochemical response for H2O2 reduction, boasting a low detection limit of 22 µM and a high analytical sensitivity of 214 μA mM-1 cm-2. Notably, the DCell-CB//Ag/δ-FeOOH sensor exhibited outstanding selectivity for H2O2 detection, even in potential interferents such as dopamine, uric acid, and ascorbic acid. Furthermore, the sensor demonstrated its suitability for monitoring H2O2 in complex biological samples, as evidenced by H2O2 recoveries ranging from 92% to 103% in 10% fetal bovine serum. These findings underscore the considerable potential of the DCell-CB//Ag/δ-FeOOH sensor for precise and reliable H2O2 monitoring in diverse biomedical and environmental applications.

In this article we presented an application of the quantum cosmological model in teleparallel gravity. Working with a vacuum solution, the gravitational energy density is quantized with the Weyl procedure and we obtain a discrete expression for the gravitational energy. As an immediate consequence the empty space exhibits an expansion for an early universe.

Here, one hundred patients (50 smokers and 50 non-smokers) clinically diagnosed with COVID-19 were studied. Yet, bioinformatics was used to predict epitopes on Tobacco mosaic virus coat protein (TMV-CP) to produce antibodies towards SARS-CoV-2. Death was three times higher in non-smokers than in smokers. However, biochemical parameters did not separate the groups. Bioinformatics analysis predicted the presence of B-cell epitopes in TMV-CP, suggesting the production of antibodies anti-TMV-CP in smoker patients. Smokers may develop severe forms of COVID-19, but survival was superior in the evaluated group than in non-smokers. Anti-TMV-CP antibodies, potentially present in smokers, might act as a pro-immune agent against SARS-CoV-2 at earlier stages of infection. These data are helpful for future studies assessing COVID-19 in smokers.

In the course of SARS-CoV-2 infection, the 3CL or nsp5 protease plays a pivotal role as the most important viral protease required for the maturation of viral proteins during host infection. Herein, we simulated for 500 ns 3CLproWT, 3CLproH41A, , 3CLproBeta, and 3CLproOmicron, in complex with the substrates nsp 4|5 and nsp 5|6. Our results show that mutations in the 3CLpro present in the SARS-CoV-2 variant of concerns (VOCs) did not lead to significant conformational changes or changes in substrate binding affinities. However, significantly high cleavage rates for the boundary between nsp4 and nsp5 were obtained for 3CLproBeta and 3CLproOmicron and may play a key role in the viral replication and virus fitness gain. Our molecular dynamics data suggest that the cleavage rate of nsp4|5 may be related to the increased amount of viral load observed for these VOCs, releasing more nsp4 than other non-structural proteins. Based on our hydrogen bonding analyses, we also discovered that Gly143 and Glu166 are key residues in substrate recognition, suggesting that these residues may be incorporated as pharmacophoric centers for Beta and Omicron variants in drug design. Our results suggest that Gly143 and Glu166 are essential residues to interact with Gln6 of the different substrates and, therefore, are potential broad-spectrum pharmacophoric centers of SARS-CoV-2 3CLpro.

The main objective of this study is to apply structural equation modeling with partial least squares and based on covariance to assess the satisfaction of residential electricity consumers. The methodology used compares the results of both structural equation models to indicate the model that best fits the problem of measuring the satisfaction of residential consumers of electricity concessionaires and licensees. The sample used in the survey contained questionnaire responses from 86.175 individuals considering the period from 2014 to 2018. The constructs evaluated were satisfaction, quality, value, loyalty, and trust. Confidence interval analysis shows that all weights are significant, demonstrating the importance of all the indicators that represent the constructs. The trust, quality, and value constructs can explain 74.4% of the variability of the satisfaction construct, so the explanatory capacity of this relationship is considered substantial. Finally, the evaluation of the performance of the service provided by the electric energy concessionaires/licensees, measured by customer satisfaction, allows for the continuous improvement of services and meeting, even if minimally, the expectations of its consumers.

This study presents a systematic review of the impact of Industry 4.0, digitalization, and information systems on the procurement function with a focus on the Portuguese reality. Despite global trends emphasizing digital transformation and innovation, the procurement practices in Portugal seem to lag. The adoption of cutting-edge technologies and the comprehensive integration of digital solutions within the procurement and supply chain management sector are yet to materialize fully in the Portuguese SME context. The benefits and obstacles of these technologies in transitioning procurement into a more strategic role are analyzed. By examining existing literature, critical factors for organizations to consider when implementing these technologies and the potential benefits are identified. The results indicate that digitalization has resulted in a data-driven approach to procurement, with the aid of advanced analytics and artificial intelligence for decision-making. Industry 4.0 has facilitated smarter factories, warehouses, and logistics operations with a focus on automation, connectivity, and real-time data. Procurement can more efficiently manage suppliers, track contracts, identify cost-saving opportunities, and increase sustainability with the aid of information systems. The study also highlights potential challenges for organizations. Overall, this study provides insightful findings on the role of digitalization in transforming procurement and the challenges and opportunities that organizations may face.

The number of physical devices connected to the Internet such as vehicles, household appliances and other "things" has been steadily increasing in recent years, thus forming the basis for the Internet of Things (IoT). IoT ecosystem extends beyond country borders and application domains, combining thousands of versatile devices that differ in terms of their structures, capabilities, and available resources. It is therefore not surprising that the landscape of wireless communication technologies and the degree of IoT devices available today is excessively broad and diverse. Interference between networks leads to frame collisions and consequent packet loss. Frame collisions occur when two or more packets overlap in time and frequency and use the same Long Range (LoRa) parameters, i.e. the same Spreading Factor (SF), Bandwidth (BW) and Carrier Frequency (CF). When most devices use the same configuration, collision probability is higher. The probability of frame collisions is also affected by traffic characteristics, particularly the periodicity of the transmission and the payload size. Larger payload sizes and more frequent transmissions accumulate with higher Time on Air (ToA) and channel occupancy [1]. Transmission powers and the location of the gateways also influences this situation. The aim of this experimental work is to verify the effects of collisions and interference in Long Range Wide Area Network (LoRaWAN), regarding the periodicity of transmissions and the payload sizes in a context of an inter-SF interference scenario. And to validate measuring tools like Received Signal Strength Indicator (RSSI), ToA and Packet Delivery Ratio (PDR) in the reliability of a network. We validate our conclusions by analyzing ToA according with RSSI and different data sizes, the RSSI for different SFs and different data sizes and finally the packet loss through the PDR for a better understanding of the reliability of packet transmission in our link. In the end we conclude that in an environment with inter-SF interference, the choice of SFs and packet lengths impacts ToA. When dealing with multiple devices near gateways, different SFs and varying packet lengths can lead to increased latency and longer ToA. Consequently, the risk of packet loss becomes more significant, especially if the signal-to-interference ratio (SIR) is low. This limitation will therefore affect scalability, particularly in Non-Line-Of-Sight (NLOS) scenarios.

Primary stability is an important factor for dental implant success. In the past years, a new method for bone site preparation was introduced, named osseodensification (OD). OD produces a condensation of the trabecular portion of the bone, increasing bone-to-implant contact and primary stability. This study aims to compare the effect of OD in cylindrical and conical implants to conventional instrumentation. A total of 40 implants, divided in 4 groups, were placed in porcine tibia: cylindrical conventional (1a); cylindrical OD (1b); conical conventional (2a); and conical OD (2b). Each implant was measured for implant stability quotient (ISQ), insertion torque (IT) and removal torque (RT). Group 2b showed the higher values for each of the evaluated parameters; groups 1b and 2b showed better results than 1a and 2a, respectively. Regarding IT and RT, group 1b achieved higher values than group 2a, but not for ISQ. The inter-groups comparison showed significant difference between groups 1a vs 2a, 1a vs 2b and 1b vs 2b for ISQ, and 1a vs 1b and 1a vs 2b for RT analysis. OD resulted in improved ISQ, IT and RT of both cylindrical and conical implants. Conical implants groups showed higher ISQ, but cylindrical OD resulted in higher IT and RT, compared to conical conventional ones.

This study examines geothermal energy extraction potential from the basement rock within the Denver-Julesburg (DJ) Basin, focusing on flow performance and heat extraction efficiency of different geothermal well configurations. It specifically compares U-Shaped, V-Shaped, Inclined V-Shaped, and Pipe-in-Pipe configurations against Enhanced Geothermal Systems (EGS) setups. Through numerical modeling, we evaluated the thermal behavior of these systems under various operational scenarios and fracture conditions. Results suggest that while closed-loop systems offer moderate temperature increases, EGS configurations show substantial potential for high-temperature extraction. This underscores the importance of evaluating well configurations in complex geological settings like the DJ Basin. The insights from this study aid in strategic geothermal energy planning and development, marking significant advancements in geothermal technology and setting a foundation for future explorations and optimizations.

We discuss the renormalization of the polarizability of a nanoparticle in the presence of either (i) a continuous graphene sheet or (ii) a plasmonic graphene grating, taking into account retardation effects. Our analysis demonstrates that the excitation of surface plasmon-polaritons in graphene produces a large enhancement of the real and imaginary parts of the renormalized polarizability. We show that the imaginary part can be changed by a factor of up to 100 relatively to its value in the absence of graphene. We also show that the resonance in the case of the grating is narrower than in the continuous sheet. In the case of the grating it is shown that the resonance can be tuned by changing the grating geometric parameters.

One of the operational challenges for the use of bentonite pellets as a sealing material in the abandonment of offshore fields consists in their disposition inside the well. This study aims to analyze the interaction of fluid media, consisting of saline solutions (NaCl, CaCl2 and KCl) and organic compounds (diesel, glycerin and olefin), with bentonite pellets, aiming its application as displacement fluid in offshore oil well abandonment operations. The physical integrity of the bentonite pellets in contact with the fluids was verified through visual inspections and dispersibility tests. Linear swelling tests were also performed to evaluate the potential for swelling of pellets in deionized water after contact with the fluid media. The results indicated that NaCl, CaCl2 and KCl solutions completely compromise the physical integrity of the pellets, while diesel and olefin showed the best responses regarding the structural preservation. Futhermore, the linear swelling tests showed that, even after the contact with diesel and olefin for 1 hour, bentonite pellets have reached a total swelling in water of 78%, after 24 hours. In this way, diesel and olefin proved to be highly promising alternatives to be used as displacement fluids for bentonite pellets in wells to be abandoned in a submarine environment.

Technology has transformed aeroponics, providing numerous advantages over traditional soil-based agriculture. However, there remains a need for comprehensive information on the types of technology employed in aeroponics and their impact on the growing process. This paper presents a literature review of 47 studies published between 2012 and 2023 in peer-reviewed journals and conference proceedings. As a result, it identifies the status and tendencies in the usage of technology in aeroponics as well as the main opportunities and challenges. Furthermore, this paper introduces the Technology Adoption and Integration in Sustainable Agriculture (TAISA) model. TAISA is a model that identifies the degree of technology integration in any sustainable agriculture system to determine how technology affects production and quality. Overall, the systematic review suggests that technology can play a vital role in improving the efficiency and sustainability of aeroponic farming. However, careful consideration must be given to the costs and technical requirements associated with using these technologies. Moreover, the TAISA model reveals that technology has primarily been employed in creating new processes that are not possible to implement without the help of technology. Therefore, we conclude that technology use has taken root in aeroponics and can be promoted to improve sustainable agriculture.

The objective of this study was to apply simulation and computational intelligence techniques using artificial intelligence and genetic algorithm for economic and environmental optimization of the reverse network (manufacturers, waste managers and recyclers in São Paulo, Brazil) of waste electrical and electronic equipment (WEEE) to promote circular economy. For the economic evaluation, the reduction of: fuel, drivers, insurance, depreciation, maintenance and charges was considered and for the environmental evaluation, the environmental impact was measured in the abiotic, biotic, water, land, air and greenhouse gases compartments. It is concluded that the optimized structure of the WEEE reverse chain for São Paulo, Brazil reduced the number of collections, making the most of the cubage. It also generated economic and environmental gains, contributing to the strategic actions of the circular economy. Thus, the proposed simulation allows replication in organizational practice, mainly to meet the 2030 agenda on reducing the carbon footprint generated in transport in large cities. Thus, this study can guide companies on structuring the reverse WEEE chain in São Paulo, Brazil for economic and environmental optimization, a relevant aspect considering the exponential generation of WEEE, requiring the implementation of the national solid waste policy, and subsequently the signature of the electronics sector agreement in São Paulo.

Dengue is a pan-tropical arthropod-borne disease, endemic in over 100 countries. The dengue virus comprises four antigenic serotypes (DENV 1-4). The envelope (E) and non-structural 1 (NS1) proteins are highly immunogenic, and the E protein carries epitopes eliciting neutralizing antibodies. In previous studies, mice immunizations with two DNA vaccines encoding the E ectodomain (pE1D2) and NS1 proteins (pcTPANS1) from DENV2 induced high protection. Based on these findings, we constructed new plasmids containing the codon-optimized genes from these proteins for expression in mouse and human cells, named pEotmD2 and pNS1otmD2. Compared to the pE1D2, the pEotmD2 mediated lower expression of the recombinant protein in human and mouse cell lines, while the pNS1otmD2 plasmid was slightly more efficient than the pcTPANS1 in these cells. Immunogenicity and protection were evaluated in BALB/c mice immunized with the original and codon-optimized plasmids followed by challenged with DENV2. In accordance with the in vitro experiments, the antibody response and protection elicited by the pE1otmD2 plasmid was lower than those observed with the pE1D2. In contrast, the pNS1otmD2 vaccine enabled slightly higher levels of the humoral and protective responses than the pcTPANS1. Overall, our study revealed different effects of codon optimization on these two dengue DNA vaccines.

This scoping review aims to identify the available evidence concerning the clinical and psychosocial impacts of the communication of oral potentially malignant disorders (OPMDs), and to map and analyze knowledge gaps regarding truth-telling about risk factors, malignant transformation, treatment, and follow-up approaches. Search strategy was performed using electronic databases (Medline/PubMed, Scopus, Embase, and Web of Science) and one grey literature database (Google Scholar). Studies focused on communicating the diagnosis of OPMDs and the patients' perceptions were included. Study selection and data extraction were performed by two authors in a two-phase process. Five publications were included in the qualitative analysis. Each publication involved a different study design, study population, types of OPMDs, and results on the important aspects of the professional-patient communication about the diagnosis of OPMDs. Although specific protocols on OPMDs communication have not yet been reported, there is an elevated interest on this topic since the strategies and skills on professional communication could provide better clinical outcomes to the patients. A list of recommendation strategies on how to communicate an OPMD diagnosis is proposed; however, future studies are still needed to design specific communication protocols for OPMD.

To effectively combat the COVID-19 pandemic, the state government of Bahia, Brazil, has distributed intensive and non-intensive care units along the nine regions that divide the state of Bahia, such that COVID-19 patients could be easily hospitalized in health care units located at the same regions where they live. However, the observed hospitalizations networks for COVID-19 patients shows that a considerable number of COVID-19 patients had to travel beyond their region of residence to be hospitalized. Hence, this study indicates that the current distribution of health care units in Bahia, Brazil, is not sufficient to effectively reduce the distances traveled by COVID-19 patients requiring hospitalization. We believe that such unnecessary travels to distant hospitals may put the sick patients as well as healthy people involved in the transportation process in risk, further delaying the stabilization of the COVID-19 pandemic in each region of the state of Bahia.

Glucose is a simple sugar molecule. The sugar molecule is chemically symbolised as C6H12O6. This means that the glucose molecule contains 6 carbon atoms (C), 12 hydrogen atoms (H) and 6 oxygen atoms (O). In human blood, the molecule glucose circulates as blood sugar. Normally after eating or drinking, our body breaks down the sugars in food and uses them to obtain energy for our cells. To do this, our pancreas produces insulin. Insulin "pulls" sugar from the blood and puts it into the cells for use. If someone has diabetes, their pancreas can't produce enough insulin. As a result, the level of glucose in the blood rises. This can lead one to many potential complications, including blindness, disease, nerve damage, amputation, stroke, heart attack and damage to blood vessels etc. In this study, a non-invasive method for monitoring blood glucose has been developed and is therefore easily usable. The device developed can measure the glucose level continuously and eliminates the disadvantages of the invasive system. Near-IR sensors (optical sensors) were used to estimate the concentration of glucose in the blood; these sensors have a wavelength of 940 nm. The sensor is placed on the tip of the finger and the output of the optical sensor is then connected to the microcontroller at the analogue input. Another sensor used, but only to provide more medical information was the heartbeat sensor. After processing and regression analysis, the glucose level is predicted, and data is sent via the Bluetooth network to a developed APP. The results of the implemented device were compared with available invasive methods. The study consists of a hardware platform inserted into an armband and then a small black parallelepiped-shaped box in which the optical sensors are inserted. The hardware consists of a microcontroller, a Near-IR optical sensor, a heartbeat sensor and a Bluetooth module.

Biosensors are analytical devices that utilize biological interactions to detect and quantify clinical biomarkers, contaminants, allergens, and microorganisms. They combine different disciplines including analytical chemistry, molecular biology, and electrical engineering. Biosensors operate by coupling a bioreceptor, such as nucleic acid or proteins, with a transducer that converts the biological interaction into an electrical signal. Electrochemical and optical transduction are commonly used approaches due to their high detection capability and compatibility with miniaturization. Biosensors provide both high specificity and sensitivity and can be integrated into low-cost microfluidic platforms for rapid and point-of-care applications. These attributes make these devices valuable tools in analytical chemistry, particularly for early diagnostic applications. However, conventional biosensors face challenges related to the immobilization of biorecognition elements on the transducer surface, leading to issues like lost of sensitivity and selectivity. To address these problems, the introduction of nanomaterials, particularly magnetic nanoparticles (MNPs) and magnetic beads (MBs), has been implemented. MNPs combine their magnetic properties with other interesting characteristics such as small size, high surface-to-volume ratio, and excellent biocompatibility. They can be tailored for specific applications and have been extensively used in various fields, including biosensing and clinical diagnosis. Furthermore, MNPs simplify sample preparation by isolating target analytes through magnetic separation, thus improving sensitivity, and reducing analysis time and interference phenomena. The synthesis and modification of MNPs play a crucial role in adjusting their properties for different applications. This review presents an overview of the synthesis and surface modifications of magnetic nanoparticles, their role in the development of biosensors and bioassays, and their applications across various scientific areas.

Traumatic Brain Injury (TBI) remains a leading cause of morbidity and mortality among all ages; despite the advances, understanding pathophysiological responses after TBI is still complex, involving multiple mechanisms. Previous reviews have focused on potential targets; however, the research on potential targets has continuously grown in the last five years, bringing even more alternatives and elucidating previous mechanisms. Knowing the key and updated pathophysiology concepts is vital for adequate management and better outcomes. This article reviews the underlying molecular mechanisms, the latest updates, and future directions for pathophysiology-based TBI management.

Background: School meals represent a significant supply of nutrients for children in Brazil, especially those in conditions of social vulnerability. Objectives: This study aimed to assess the levels of arsenic (As), cadmium (Cd), and lead (Pb) in meals served in public elementary schools in four municipalities in the state of Bahia, Brazil, and assess the risk posed to children's health. Methods: Ninety-six samples were collected from 16 schools, freeze-dried, and subjected to microwave-assisted digestion. The As, Cd, and Pb levels were determined by graphite furnace atomic absorption spectrometry. The risk assessment was based on calculating each element's hazard quotient (HQ). Results: None of the samples reached or exceeded the tolerable levels for the elements analyzed. Pb was the metal that obtained the most significant result, reaching maximum levels of 39-157 µg.kg-¹. Conclusions: No element exceeded the PTWI proposed by JECFA; thus, the toxic metal content in school meals poses a negligible risk to children´s health.

Opuntia ficus-indica has always interacted with many phytophagous insects at its center of origin; two of them are Dactylopius coccus and D. opuntiae. D. coccus, or true cochineal, is produced to extract carminic acid, and D. opuntiae or wild cochineal is a key invasive pest of O. ficus-indica in more than 20 countries around the world. Despite the economic and environmental relevance of this cactus and, D. opuntiae and D. coccus, there are few studies that have explored volatile organic compounds (VOCs) derived from the plant-insect interaction. The aim of this work was to determine VOCs of D. coccus and D. opuntiae feeding on cultivars suitable for their development and to identify different VOCs in cladodes infested by each Dactylopius species. Volatiles were identified through their essential oils, which were obtained by hydrodistillation. A total of 66 VOCs from both Dactylopius species were identified, and 125 from the Esmeralda and Rojo Pelón cultivars infested by D. coccus and D. opuntiae, respectively, were determined. Differential VOCs production due to infestation by each Dactylopius species was also found. Some changes in methyl salicylate, terpenes such as linalool or the alcohol p-vinylguaiacol were related to Dactylopius feeding on cladodes of their respective cultivars. Changes in these VOCs and their probable role in plant defense mechanisms should receive more attention because this knowledge could improve D. coccus rearing, or to its inclusion in breeding programs for D. opuntiae control in regions where it is a key pest of O. ficus-indica.

The fact that real dissipative (entropy producing) processes may be detected by non–comoving observers (tilted), in systems that appear to be isentropic for comoving observers, in general relativity, is explained in terms of the information theory, in analogy with the explanation of the Maxwell's demon paradox.

In this paper, we revisit a modified version of the classical Whitehead's theory of gravity in which all possible bilinear forms are considered to define the corresponding metric. Although, this is a linear theory that fails to give accurate results for the most sophisticated predictions of general relativity, such as gravity waves, it can still provide a convenient framework to analyze some new phenomena in the Solar System. In particular, recent development in the accurate tracking of spacecraft and the ephemerides of planetary positions have revealed certain anomalies in relation with our standard paradigm for celestial mechanics. Among them the so-called flyby anomaly and the anomalous increase of the astronomical unit play a prominent role. In the first case the total energy of the spacecraft changes during the flyby and a secular variation of the semi-major axis of the planetary orbits is found in the second anomaly. For this to happen it seems that a net energy and angular momentum transfer is taken place among the orbiting and the central body. We evaluate the total transfer per revolution for a planet orbiting the Sun in order to predict the astronomical unit anomaly in the context of Whitehead's theory. This could lead to a more deeply founded hypothesis for an extended gravity model.

High insertion torques increase the primary stability of dental implants, which might be beneficial for immediate loading protocols, but may lead to local ischemia and necrosis of the bone-implant interface. This study compared the outcomes of implants placed with low (<45Ncm), conventional(45-70Ncm), and high (≥75Ncm) insertion torques in All-on-4 concept cases with up to 2-year follow-up. Patients included in this study presented edentulous or partially dentate arches with an indication for full-arch rehabilitation. Implants were installed following the All on four protocol and were divided into 3 groups: Low, Conventional, and High torque, and were followed periodically for 2 years with ISQ measurements. The results showed no significant differences in success rates between the three groups. This suggests that high insertion torques may maintain higher primary stability values for immediately loaded implants during the healing period. Further studies are necessary to confirm these findings.

The present study investigates the impact of electrode surface roughness on the electrofreezing of water. This research focuses on how the electrode roughness induced by a laser treatment affects the nucleation and growth of ice crystals under controlled electric fields. To achieve this, a series of experiments were conducted using deionized water samples placed between electrodes with varying surface roughness. The electrodes, fabricated with the Al6061 T6 alloy were structured via the Laser Shock Processing (LSP) method. For this purpose, the pulsed densities during the LSP process were varied from 900 to 2500 pulses/cm2. The increase of the pulse density was correlated to the surface structuring and to the microstructural features and average roughness of the LSP-treated Al6061 alloy. A wavy-like microstructure was induced upon the LSP treatment with average roughnesses between ~ 3.5 and 6 µm at the selected pulse densities. The results indicate that electrode roughness significantly influences the electrofreezing process. Rougher electrodes were found to lower the nucleation temperature compared to smoother ones, suggesting enhanced ice nucleation activity. The findings are attributed to the increased electric field concentration at the asperities of the rough surfaces, which may facilitate the alignment of water molecules and the formation of critical ice nuclei.

Unmanned Aerial Vehicles (UAVs) in particular multirotors are becoming the {\it de facto} tool for aerial sensing and remote inspection. In large industrial facilities, a UAV can transmit an online video stream to inspect difficult to access structures, such chimneys, deposits and towers. However, the communication range is limited, constraining the UAV operation range. This limitation can be overcome with relaying UAVs placed between the source UAV and the control station, creating a line of communication links. In this work we assume the use of a digital data packet network technology, namely WiFi, and tackle the problem of defining the exact placement for the relaying UAVs that creates an end-to-end channel with maximal delivery of data packets. We consider asymmetric communication links and we show an increase as large as $15$\% in end-to-end packet delivery ratio when compared to an equidistant placement. We also discuss the deployment of such a network and propose a fully distributed method that converges to the global optimal relay positions taking, on average, 1.4 the time taken by a centralized method.

When present in specific amounts in the air, the colorless, odorless, and tasteless gases monoxide and carbon dioxide may either replace oxygen in red blood cells (CO) or increase the respiratory rate causing cardiac arrhythmias (CO2), leading to death. Commercial sensors take around 8 h to detect levels of CO (50 PPM), causing moderate poisoning. SnO2 presents controlled interactions with the atmosphere using conductance and vacancy adjustments to capture electrical properties. However, the selectivity of gas detection by SnO2 can still be improved, thus also increasing the application possibilities. The present study aimed to optimize the sensing of CO and CO2 in SnO2 using palladium functionalization. The vapor-liquid-solid method synthesized a network of SnO2 nanobelts decorated with palladium nanoparticles. The sensitivity of the sensors for CO and CO2 were evaluated, characterizing parameters such as response time, a wide range of CO and CO2 concentrations, and temperature. In the seventh measurement cycle, the sensor response for different concentrations of gases in consecutive cycles showed a sensitivity of up to 125% for CO in 60 s. Furthermore, we observed increased sensor sensitivity with material doping with nanoparticles from 130 ppm to 1360 ppm in 30 seconds to CO. Conclusion: The results provide a better understanding of the sensitivity of SnO2 in palladium-decorated nanoparticles, offering insights for detecting low CO concentrations quickly. The behavior of these doped nanosensors showed us the importance of considering them as a practical possibility for detecting these gases of importance to human health.

There is an urgent need to develop new therapies for cancer treatment due to high rates of resistance and tumor relapse. Moreover, chemotherapy and radiation weaken the immune system and leave patients susceptible to sudden death from infections and organ failure since antineoplastic drugs lack specificity. Hence, scientists worldwide continue the search for natural alternatives with anticancer activities and fewer side effects. In this regard, traditional medicine offers strategies for preventing and treating numerous diseases and nowadays scientific studies worldwide highlight some of the mechanisms underlying their potential as an effective alternative for the management of cancer. In Mexico, Mayan healers have been prescribed mainly medicinal plants for more than 2,000 years. Furthermore, their ethnomedical knowledge has led to drug discovery or the development of herbal remedies. Medicinal plants from the genus of Cissus remain an important element of all indigenous medical systems in Mexico including the Mayan tribes in Yucatan, particularly for the management of gastrointestinal illnesses, sores, cutaneous diseases, and tumors. In this review, we present the reported bioactivities against cancer cells of the extract and compounds from the species of Cissus with a particular focus on recent studies on the phytochemistry of C. trifoliata which is widely distributed in Mexican territory and used for tumor management in traditional medicine.

The increasing world steel production has contributed to the generation of million tons of mining residues. But, the huge demand of aggregates for the execution of pavements and the lack of raw material for this purpose, the research for new materials to be used in this area has become vital. The sandy residue that was studied was collected at Mariana– MG county, which was the result of the iron ore processing of the company Samarco S.A. This research has as objective the evaluation of the mechanical behaviour of asphalt mixtures utilizing residue from the processing of iron ore in substitution of the fine aggregate in the asphalt mixtures of the Asphaltic Concrete type, aiming its use in the rolling layer of a road pavement. To do so, the Marshall dosage of three asphalt mixtures and the mechanical tests characterized by the resilient modulus and fatigue life at a controlled tension were performed. It was also performed the determination of the optimum content by the Superpave dosage method conducted in two of these mixtures to obtain the Compaction Index and the mechanical behaviour by the Flow Number value. Concluded that the residue is compatible with all current standards for the use in asphalt mixtures, being able to be used in the CBUQ rolling layer, showing an improvement in the behaviour compared to the standard mixture.

Cassava (Manihot esculenta Crantz), domesticated in the Amazonian region of South America, presents an important diversity in Ecuador, where it is a main staple food; however, only few Ecuadorian cassava accessions have been included in international molecular assessments. The purpose of this study was to apply suitable cassava mi-crosatellites to characterize the genetic variability of the Ecuadorian cassava collection composed mainly of local landraces from the Coast, Andes and Amazonia regions. The use of microsatellite markers allowed the determination of the genetic diversity of the collection. Seven selected SSR primers, permitted to identify homozygous and hetero-zygous materials within the cassava collection of 133 accessions. The loci presented an average genetic diversity value of 0.7 and an average PIC value of 0.67, which is con-sidered high. Low number of duplicates (8.8%) were identified in the Ecuadorian col-lection which is not fully duplicated at CIAT. Currently, a wide range of cassava diver-sity is still cultivated in multi-crop agro-ecosystem, mainly in the Coast and Amazo-nian regions. Especially in the Amazonian region, due to important cultural uses of cassava by local ethnic communities, more in depth studies in the region could unveil the genetic diversity present in situ today.

In this work we present a new algorithm that achieves the perfect Shannon secret by means of the XOR function and a method that we call multiple key reuse. The algorithm has two execution modes: message authentication and data encryption. The XOR encryption scheme allows for batch encryption and exhibits Perfect Forward Secrecy (PFS). Furthermore, based on our fundamental algorithm, we have developed a new strategy for blockchain implementation that does not require Proof of Work (PoW), but defines a fair mechanism for miner selection and secure addition of blocks to the chain. Since our method is mainly based on the Boolean XOR function, the strength of the cryptosystem can be directly established thanks to its mathematical properties. Due to the risk that quantum computers represent for current cryptosystems based on prime factorization or discrete logarithm, we postulate that our method represents a promising alternative in the quantum era for the security of communications between Internet of Things devices as well as Blockchain technology.

In this study, we have designed a promising platform based on metal-organic frameworks (MOFs) to develop paper-based analytical devices (PADs) to immobilize biomolecules for application in biosensors. PADs have become increasingly popular in sensing applications in recent years due to their portability, low cost, simplicity, efficiency, fast detection capability, excellent sensitivity, and selectivity. In addition, MOFs are an excellent choice for developing highly sensitive and selective sensors. Their ability to reversibly and reproducibly adsorb and desorb specific molecules allows using these materials as sensors for various applications. They also offer the possibility to modify their structure and properties, making them highly versatile and adaptable to different environments and sensing needs. In this research, we synthesized and characterized three different amino-functionalized MOFs: UiO66-NH2 (Zr), MIL125-NH2 (Ti), and MIL101-NH2 (Fe). These MOFs were used to fabricate PADs capable of sensitive and portable monitoring of alkaline phosphatase (ALP) enzyme activity by laser-induced fluorescence (LIF). Overall, amino-derivated MOF platforms demonstrate significant potential for integration into biosensor PADs, offering key properties that enhance their performance and applicability in analytical chemistry and diagnostics.

The brain being arguably the most complex organ in the human body, its detailed functioning is yet to be fully deciphered, let alone accurately modeled. Nonetheless, the medical community has gathered quite a remarkable amount of studies about the consequences of illnesses and injuries on its development and functioning. This bibliographic review aims to cover mostly the findings related to the changes in the physical distribution of neurons and their connections - the connectome -, both structural and functional, as well as their modelling. It does not intend to offer an extensive medical description of all injuries and diseases affecting the brain, rather presenting the most common ones succinctly so the need for accurate brain modelling can be fully understood and pondered, offering propositions to this aim.

In an analogous manner as occurred during the development of a connected metabolism that at some point reached characteristics associated with what is called ‘life’ ―due mainly to a catalytic closure phenomenon when chemicals started to autocatalyze themselves forming a closed web of chemical reactions― it is here proposed that cognition and consciousness (or features associated with them) arose as a consequence of another type of closure within the nervous system, the brain especially. Proper brain function requires an efficient web of connections and once certain complexity is attained due to the number and coordinated activities of the brain cell networks, the emergent properties of cognition and consciousness take place. Seeking to identify main features of the nervous system organization for optimal function, it is here proposed that while catalytic closure yielded life, neuroglial closure produced cognition/consciousness.

This study aims to investigate whether 16 weeks of High-Intensity Interval Training (HIIT) implemented on Physical Education classes (PEC), can improve physical fitness in high-school adolescents This study was a two-arm randomized controlled trial design with adolescents (15-17 years old). Twelve classes were randomized to either a 16 weeks of HIIT (HIIT-G, n = 106 students) implemented on PEC warm-up or a control group (CG, n = 123 students) of usual PEC warm-up. The HIIT sessions ranged from 14 to 20 all-out bouts intervals, adopting a 2:1 work-to-rest ratio. Post-intervention measures revealed a significant difference between groups in CRF and girls from HIIT-G increased their cardiorespiratory fitness (CRF) with significant difference between female groups and a medium to large effect size. The main findings from this study indicate that brief whole-body HIIT of an extremely low volume, over 16 weeks, can improve CRF in adolescent girls.

Manufacturing systems need to meet I4.0 guidelines to deal with uncertainty in scenarios of turbulent demand for products. The engineering concepts to define the service’s resources to manufacture the products will be more flexible, ensuring the possibility of re-planning in operation. These can follow the engineering paradigm based on capabilities. The virtualization of industry components and assets achieves the RAMI 4.0 guidelines and (I4.0C), which describes the Asset Administration Shell (AAS). However, AAS are passive components that provide information about I4.0 assets. The proposal of specific paradigms is exposed for managing these components, as is the case of multi-agent systems (MAS) that attribute intelligence to objects. The implementation of resource coalitions with evolutionary architectures (EAS) applies cooperation and capabilities’ association. Therefore, this work focuses on designing a method for modeling the asset administration shell (AAS) as virtual elements orchestrating intelligent agents (MAS) that attribute cooperation and negotiation through contracts to coalitions based on the engineering capabilities concept. The systematic method suggested in this work is partitioned for the composition of objects, AAS elements, and activities that guarantee the relationship between entities. Finally, Production Flow Schema (PFS) refinements are applied to generate the final Petri net models (PN) and validate them with Snoopy simulations. The results achieved demonstrate the validation of the procedure, eliminating interlocking and enabling liveliness to integrate elements behavior.

Bananas, a staple food globally and a key agricultural commodity, face a severe threat from the fungus Fusarium oxysporum form specialis cubense (Foc), significantly impacting production. Genetic improvement to develop resistant cultivars stands out as a crucial strategy to mitigate this disease. This study focused on assessing and recommending enhanced diploid banana varieties for resistance against Foc subtropical race 4 (ST4) and Foc race 1 (R1). Twenty-five improved diploids developed by Embrapa, Brazil, underwent evaluation. Utilizing a scale for internal symptoms at 90 days post-inoculation, genotypes were categorized from highly resistant to highly susceptible based on the internal symptom index. The diploid M53 exhibited high resistance to R1 and resistance to Foc ST4, while only the diploid CNPMF 0534 demonstrated complete resistance to both R1 and ST4, with resistance to the latter likely associated with penetration. These findings provide valuable insights for banana and plantain breeding programs, offering selected diploids for crossbreeding with commercial cultivars to develop new, resistant genotypes against Foc.

Organizations can play a significant role in the advancement of Sustainable Development, and companies with Quality, Environmental and Occupational Health and Safety (QEOHS) certified management systems address the three Sustainability Dimensions (economic, environmental and social). This research aims to map the present level of engagement of those companies in contributing and reporting to the 17 Sustainable Development Goals of The United Nations 2030 Agenda. The content of companies reports (available in web sites, by 31 December 2017) of a total of 235 Portuguese organizations with QEOHS certified management systems, was analyzed. The results show a moderate reporting of SDGs by those companies, with the top five being SDG 12 - Responsible consumption and production (23.8%), SDG 13 – Climate action (22.1%), SDG 09 - Industry, innovation, and infrastructure (21.3%), SDG 08 - Decent work and economic growth (20.0%) and SDG 17 - Partnerships for the goals (19.6%). The results of the statistical tests indicate that the communication of SDGs is more prominent in organizations (QEOHS) with higher business volume, that are members of the United Nations Global Compact Network Portugal, and that disclose their sustainability reports on their web site. This study can be useful for decision-makers that aim to support organizations to contribute to the Sustainable Development Goals.

The health benefits of extra virgin olive oil (EVOO) are related with its chemical composition and the presence of bioactive compounds with antioxidant properties. The aim of this study was evaluate antioxidant compounds (pigments, CoQ10 and phenolic compounds) and antioxidant properties of EVOO from the same region comparing different cultivars (Hojiblanca and Arbequina), harvest year and crop stage. Antioxidant properties of oils were studied before and after a gastrointestinal digestion process, by in vitro assays (DPPH, ABTS and FRAP) and antioxidant markers in Caco-2 cells (reactive oxygen species production). The content of bioactive compounds measured was significantly affected by cultivar and harvest year (except for carotenoids) and by the crop stage (except for coenzyme Q10). Higher amount of coenzyme Q10 was observed in Hojiblanca than in Arbequina EVOO. Total phenol content and antioxidant properties were also different depending on cultivar and harvest year and the in vitro digestion process strongly improved antioxidant marker values. Antioxidant potential in bioaccessible fractions was mainly related with content of coenzyme Q10 and phenolic compounds in EVOO. Chemometric analysis showed that the oils were clearly classified by cultivars, harvest and crop stage, according with chemical composition and antioxidant activity analyzed in the present study

Gut protozoan parasites are neglected and not targeted by specific control initiatives and this have led to a knowledge gap concerning their regional diversity and epidemiology. The present study aims to explore Giardia duodenalis genetic diversity and assess the epidemiologic scenario of subclinical infections in different Brazilian biogeographic regions. Cross-sectional surveys (n=1,334 subjects) were conducted in the Amazon, Cerrado, Semiarid and Atlantic Forest. Microscopy of non-diarrheal feces and nucleotide sequencing of a β-giardin gene fragment were performed. Twenty-seven (52.9%) β-giardin sequences were characterized as assemblage A and 24 (47.1%) as assemblage B. In Amazon, assemblage B was the most frequently detected with 2 novel sub-assemblages. Assemblage A predominated in the extra-Amazon region, with 5 novel sub-assemblages. Prevalence rates reached 17.8% in Amazon, 8.8% in Atlantic Forest, 7.4% in Cerrado and 2.3% in the Semiarid. People living in poverty and extreme poverty presented significantly higher positivity rates, reaching 11.9% and 14.5%, respectively. Giardiasis tended to be more frequent in stunted (21.6%) than in eutrophic children (12.9%). In conclusion, subclinical giardiasis in endemic in Brazilian communities in different biogeographic regions, presenting high genetic diversity and a heterogeneous genotypic distribution.

This research explores the application of ARIMA (Autoregressive Integrated Moving Average) models and parallel computing techniques to analyze and forecast anemia diagnoses in children under 36 months in the Junín region of Peru. Using health data from 2023-2024, including insurance type, patient information, diagnosis dates, hemoglobin levels, and treatment details, we develop predictive models to understand trends and patterns in childhood anemia. The study aims to demonstrate the effectiveness of time series analysis and high-performance computing in addressing this critical public health issue. Results indicate improved forecasting accuracy and computational efficiency, potentially aiding in resource allocation and policy development for anemia prevention and treatment programs.

Cancer cell lines are widely used as in vitro models of tumorigenesis, facilitating fundamental discoveries in cancer biology and translational medicine. Currently, there are few options for glioblastoma (GBM) treatment and limited in vitro models with accurate genomic and transcriptomic characterization. Here, a detailed characterization of a new GBM cell line, namely AHOL1, was conducted in order to fully characterize its molecular composition based on its copy number alteration (CNA) and transcriptome profiling, followed by the validation of key elements associated with GBM tumorigenesis. Large numbers of CNAs and differentially expressed genes (DEGs) were identified. CNAs were distributed throughout the genome, including gains at Xq11.1-q28, Xp22.33-p11.1, Xq21.1-q21.33, 4p15.1-p14, 8q23.2-q23.3 and losses at Yq11.21-q12, Yp11.31-p11.2 and 12p13.31 positions. Nine druggable genes were identified, including HCRTR2, ETV1, PTPRD, PRKX, STS, RPS6KA6, ZFY, USP9Y and KDM5D. By integrating DEGs and CNAs, we identified 57 overlapping genes enriched in fourteen pathways. Altered expression of several cancer-related candidates found in the DEGs-CNA dataset was confirmed by RT-qPCR. Taken together, this first comprehensive genomic and transcriptomic landscape of AHOL1 provides unique resources for further studies and identifies several druggable targets that may be useful for therapeutics and biologic and molecular investigation of GBM.

The vegetation in constructed wetlands (CWs) plays an important role in wastewater treatment. Popularly, the common emergent plants in CWs have been vegetation of natural wetlands. However, there are ornamental flowering plants that have some physiological characteristics similar to the plants of natural wetlands that can stimulate the removal of pollutants in wastewater treatments; such importance in CWs is described here. A literature survey of 87 CWs from 21 countries showed that the four most commonly used flowering ornamental vegetation genera were Canna, Iris, Heliconia and Zantedeschia. In terms of geographical location, Canna spp. is commonly found in Asia, Zantedeschia spp. is frequent in Mexico (a country in North America), Iris is most commonly used in Asia, Europe and North America, and species of the Heliconia genus are commonly used in Asia and parts of the Americas (Mexico, Central and South America). This review also compares the use of ornamental plants versus natural wetland plants and systems without plants for removing pollutants (COD, BOD, nitrogen and phosphorous compounds). The removal efficiency was similar between flowering ornamental and natural wetland plants. However, pollutant removal was better when using ornamental plants than in unplanted CWs. The use of ornamental flowering plants in CWs is an excellent option, and efforts should be made to increase the adoption of these system types and use them in domiciliary, rural and urban areas.

When computers start to become a dominant part of technology around the 1950s, fundamental questions about reliable designs and robustness were of great relevance. Their development gave rise to the exploration of new questions such as what made brains reliable (since neurons can die) and how computers could get inspiration from neural systems. In parallel, the first Artificial Neural Networks came to life. Since then, the comparative view between brains and computers has been developed in new, sometimes unsuspected directions. With the rise of deep learning and the development of connectomics, an evolutionary look at how both hardware and neural complexity have evolved or designed is required. In this paper, we argue that important similarities have resulted both from convergent evolution (the inevitable outcome of architectural constraints) and inspiration of hardware and software principles guided by toy pictures of neurobiology. Moreover, dissimilarities and gaps originate from the lack of major innovations that have paved the way to biological computing (including brains) that are completely absent within the artificial domain. As it occurs within synthetic biocomputation, we can also ask whether alternative minds can emerge from A.I.\ designs. Here we take an evolutionary view of the problem and discuss the remarkable convergences between living and artificial designs and what are the pre-conditions to achieve artificial intelligence.

The food system, the most important driver of planetary transformation, is in a deep crisis. Therefore, seeking a sustainable and socially-fair transition pathway becomes an issue of utmost priority for our own survival. The consideration of food as a commodity, a social construct that played a central role in driving this crisis, remains the uncontested narrative to lead the different transition pathways what seems rather contradictory. By exploring the normative values in the transition landscape, this paper seeks to understand how relevant is the hegemonic narrative of “food as commodity” and its alternative of “food as commons” to determine transition trajectories and food policy beliefs. Applying the Multi-level Perspective framework and developing the ill-studied “agency in transition”, this research enquired food-related professionals that belong to an online community of practice (N=95) on valuation of food dimensions and agency in food transitions to check whether the valuation of food is relevant to explain personal stances in transition. Results suggest the socially-constructed view of food as commodity is positively correlated to the gradual reforming attitude, whereas food as commons is positively correlated to the counter-hegemonic transformers regardless the self-defined position in the transition landscape (regime or niches). At personal level, there are multiple loci of resistance with counter-hegemonic attitudes in varied institutions of the regime and the innovative niches, many of them holding this discourse of food as commons. Conversely, alter-hegemonic attitudes are not positively correlated to this alternative discourse and they may inadvertently or purportedly reinforce the ‘‘neoliberal narrative’’. Food as commons, a different narrative whose rationale is explained in the paper, seems to be a relevant framework that could enrich the multiple transformative constituencies that challenge the industrial food system and therefore facilitate the convergence of movements that reject the commodification of food.

We investigated the biomechanical behaviour of different fixations of the tibial posterior malleolus (TPM), simulating distinct situations of involvement of the tibiotalar articular surface (TTAS) through a finite element model (FEM). A 3D computer-aided design model of the left ankle was obtained. The materials used were divided according to their characteristics into ductile and non-ductile, and all materials were assumed to be linear elastic, isotropic, and homogenous. Three different fracture lines of the TPM were defined, with sagittal angles of 10º, 25º, and 45º. For biomechanical comparison, different constructions using a trans-syndesmotic screw (TSS) only (Group T), a one-third tubular plate only with (Group PT) and without (Group PS) a TSS, and a locked compression plate with (Group LCPT) and without (Group LCPS) a TSS were tested. FEM was used to simulate the boundary conditions of vertical loading. Load application regions were selected in the direction of the 700N Z axis, 90% on the tibia and 10% on the fibula. Data on the displacement and stress in the FEM were collected, including the total principal maximum (MaxT) and total principal minimum (MinT) for non-ductile materials, total displacement (desT), localized displacement at the fragment (desL), localized displacement at syndesmosis (desS), and Von Mises equivalent stress for ductile materials. The data were analyzed using ANOVA and multiple comparison LSD tests were used. For TPM fractures with a sagittal angles 10º and 25º, desL in the PT and LCP groups was significantly lower, as well as Von Mises stress in Group LCPT in 10º, and PT and LCPT groups in 25º. TPM fractures with a sagittal angle of 45º, desL in the LCP group and Von Mises stress in Group LCPS and LCPT was significantly lower. We found that any TPM fracture may indicate instability of the distal tibiofibular syndesmosis, even when the fragment is small. Our study showed that in fragments involving 10% of the TTAS, the use of a TSS is sufficient, but when the involvement is greater than 25% of the TTAS, either non-locked or locked plate must be used to buttress the TPM. In posterior fragments affecting 45% or more of the TTAS, the use of a locking plate is recommended.

Myelodysplastic syndromes (MDS) are diseases that occur when blood-producing cells in the bone marrow are damaged; such damage can affect one or more types of blood cells. Common types of MDS are refractory anemia with ring sideroblasts and refractory anemia with excess blasts (MDS-RS and MDS-EB, respectively). This work analyzed the proteomics of the medullary plasma of 10 patients with MDS-RS and MDS-EB compared to healthy control people. Overexpressed proteins that may be potential candidates for biological markers for the evaluation, study, and diagnosis of these diseases have been identified. These samples were subjected to immunodepleting, concentrated, and digested for further analysis by mass spectrometry. The ratios between selected groups and healthy people were calculated. Seven overexpressed proteins in both syndromes were identified as potential biomarker candidates: vitronectin (VTN), (2) fibrinogen (FGA), (3) pregnancy zone protein (PZP), (4) kininogen (KNG1), (5) immunoglobulin lambda chain (IGLL1), (6) complement factor C4b, and (7) hemopexin (HPX). A modified affinity chromatographic column with lectin frutalin (FTL) was used for non-depleted samples. Immunoglobulin M (IgM) was expressed in the samples from both syndromes. Surprisingly, IgM from patients with syndromes was over retained on the frutalin (FTL) column when compared with the control group. We further hypothesized that over retention of this protein by the FTL is due to the presence of α-galactosidic residues in the IgM of MDS-RS and MDS-EB patients. Differential recognition of proteins on non-depleted samples from the use of FTL appears to be a powerful tool for proteomic analysis.

Cancer is a prevalent disease worldwide and treatments such as radiotherapy and chemotherapy sometimes lead to adverse events. Oral mucositis is one of the most disabling and clinical guidelines do not take into account nutritional interventions. The primary endpoint was to gather the evidence about the efficacy of nutritional interventions in the prevention and/or treatment of antineoplastic induced oral mucositis in oncological patients. It was carried out a bibliographic review in PubMed data base by combining MesH terms with boolean operators. Articles were selected based on inclusion and exclusion criteria; 50 final articles were found. Although further evidence is needed, glutamine, honey and vitamins appear to be a good therapeutic option. The rest of the compounds presented controversial or insufficient results to draw conclusions over their utilization as prevention or treatment options. Low evidence is reported about oral mucositis nutritional interventions in spite of being attainable and affordable compounds. Scarce evidence is shown in paediatric patients compared to adults. Developing higher quality studies and combinations with the compounds researched is necessary to create stronger evidence.

Fluoride (iF) is important inorganic pollutant in groundwater in central México. The aim of this study was estimated environmental risk exposure of iF in residents of Jerez Zacatecas México. Fifty-five tap water samples were collected from households to determine iF concentrations using the ion-selective electrode method. Based on these environmental values, the Hazard Quotient (HQ) was estimated following the methodology of the Pan American Health Organization (PAHO). Subsequently, risk maps were generated from these values to visualize the spatial distribution of high-risk areas within the city. iF in tap water ranger in concentration from 1.3 – 7.3 mg/L (ppm). We estimated HQ in a range of 0.63 to 3.73. iF ex-posure in tap water is a health problem that must be addressed, carrying out risk communication actions that allow the population to take care of their health through simple actions, avoiding future health costs.

Larrea tridentata is an endemic plant from the Mexican highlands used in traditional medicine to treat hypertension and kidney stones, among many ailments. This study evaluated a vasorelaxant compound: 5- Hydroxy-2-(4-hydroxy-3-methoxyphenyl)-6,7,8-trimethoxy-4H-1-benzopyran-4-one (also known as 8-Methoxycirsilineol: 8-M) which we purified from an extract of this plant. Mesenteric artery rings were isolated from male guinea pigs for isometric force measurements. Freshly isolated smooth muscle cells from mesenteric artery were used for ionic current measurement for calcium and potassium. 10 μM 8-M completely relaxed vascular rings contracted with phenylephrine in a dose-dependent fashion with an EC50 = 4.26 ± 1.16 10-6 M and 4.56 ± 1.64 10-6 M for endothelium intact and endothelium-free tissue, respectively. The relaxant effect of 8-M was not affected by maximal doses of nifedipine, verapamil or iberiotoxin. Nevertheless, the relaxant effect was partially abolished by addition of 10 mM Tetraethylammonium (TEA). In accordance to this, calcium currents evoked by depolarization were not affected by 8-M, whereas TEA-sensitive potassium currents, were increased upon its addition. Vasorelaxation due to 8-M is partly due to activation of KV currents in an endothelium independent mode.

A large amount of data is produced every day by stakeholders of the Air Traffic Management (ATM) system, in particular airline operators, airports, and air navigation service provider (ANSP). Most data is kept private for many reasons, including commercial and security concerns. More than data, shared information is precious, as it leverages intelligent decision-making support tools designed to smooth daily operations. We present a framework to detect, identify and characterise anomalies in past aircraft trajectory data. It is based on an open source of ADS-B based aircraft trajectories, and extracted information can benefit a wide range of stakeholders: Air Traffic Control (ATC) training centres could play more realistic simulations; ANSP may improve capacity indicators; academics improve safety models and risk estimations; and commercial stakeholders, like airlines and airports, may use such information to improve short-term predictions and optimise their operations. The technique is based on autoencoding artificial neural networks applied on flows of trajectories, which provide a useful reading grid associating cluster analysis with quantified level of abnormality. In particular, we find that the highest anomaly scores correspond to poor weather conditions, whereas anomalies with a lower score relate to ATC tactical actions.

The World Health Organization has defined the outbreak of the new coronavirus as a public health emergency of international concern. The average age of patients affected by the disease caused by the virus ranges from 49 to 59 years. The symptoms of coronavirus disease 2019 (COVID-19) infection include fever, cough, acute respiratory disease, and, in severe cases, the disease may progress to pneumonia and renal failure that may lead to death. Many oral and maxillofacial hospital procedures produce aerosol and droplets contaminated by blood, bacteria, and viruses. The purpose of this study is to gather recommendations from health authorities and scientific articles in order to educate surgeons regarding the procedures to assist and treat in oral and maxillofacial surgeries. The objective is to prevent the transmission of COVID-19 during the treatment of patients in urgent and emergency situations. The study’s methodology used the guidelines provided by the Brazilian College of Oral and Maxillofacial Surgery, in addition to the recommendations and epidemiologic data from national and international health authorities. The implementation of special precautions in oral and maxillofacial surgeries may elucidate questions related to the transmission of the disease by asymptomatic carriers and help control the spread of the virus.

The capacitated lot-sizing problem with product recovery (CLSP-RM) holds significant importance in reverse logistics but is notoriously complex (NP-hard). In this study, two techniques are introduced to confront this challenge. The first technique entails devising a linear optimization task that eliminates capacity limitations across a wide problem spectrum, yielding a remarkably accurate approximation of the optimal solution. This adaptable approach presents a potent alternative and holds potential for extension to diverse problem categories owing to its versatile nature. The second technique employs a simulation methodology utilizing Halton’s uniform random numbers to address the issue. This randomized production search method sidesteps considerations of production costs, inventory expenditures, and production order when determining production batches. The research’s novelty lies in its application of these techniques to the problem. The suggested methods undergo evaluation via a benchmark dataset of approximately 4200 instances, with comparison against solutions derived through the Gurobi solver. The results underscore the efficacy and resilience of the introduced methodology in tackling the CLSP-RM predicament.

The number of physical devices connected to the Internet such as vehicles, household appliances and other "things" has been steadily increasing in recent years, thus forming the basis for the Internet of Things (IoT). IoT ecosystem extends beyond country borders and application domains, combining thousands of versatile devices that differ in terms of their structures, capabilities, and available resources. It is therefore not surprising that the landscape of wireless communication technologies and the degree of IoT devices available today is excessively broad and diverse. Interference between networks leads to frame collisions and consequent packet loss. Frame collisions occur when two or more packets overlap in time and frequency and use the same LoRa parameters, i.e. the same spreading factor (SF), bandwidth (BW) and carrier frequency (CF). When most devices use the same configuration, collision probability is higher. The probability of frame collisions is also affected by traffic characteristics, particularly the periodicity of the transmission and the payload size. Larger payload sizes and more frequent transmissions accumulate with higher time on air (ToA) and channel occupancy [1]. Transmission powers and the location of the gateways also influences this situation. The aim of this experimental work is to verify the effects of collisions and interference in LoRaWAN, regarding the periodicity of transmissions and the payload sizes. The hardware used is an Arduino board programmed in C/C++, a LoRa Bee module operating at a frequency of 868 MHz and a LoRaWAN LG02 gateway. Different scenarios were tested in an outdoor environment, with Line of Sight and Non-Line of Sight, and different variables such as: SFs equal to 7, 9 and 12; distances of 20, 40 and 60 meters and different data sizes of 14, 32 and 51 bytes, over the same channel. The packets with different SF’s and different data sizes were transmitted in a (pseudo) random way, one after the other, overlapping different SFs in the same channel and testing this way (theoretical) orthogonality among them. By fixing the bandwidth in 125 kHz, and testing different SFs we intend to increase the probability of cause packet loss by applying to our connection a combination of emitted power/short distance that leaves an interference power received, strong enough [2] for the effect. We validate our conclusions by analyzing ToA according with RSSI and different data sizes, the RSSI for different SFs and different data sizes and finally the packet loss through the PDR-Packet Delivery Ratio for a better understanding of the reliability of packet transmission in our link.

This paper presents high-resolution digital measurements at low cost, combining oversample and averaging. Experiments of processing data between samples and between multiple temperature sensors in the same environment are conducted. They provide results with effective increase in the analog to digital converter bits, in correspondence with the minimization on the effects of noise. It is shown that averaging a set of small, low-cost sensors at a small microcontroller can give flexible access to improved measurement accuracy.

Background: Sarcopenia, a subject of extensive research, has led to numerous clinical trials and systematic reviews (SR). These reviews aid healthcare professionals by summarizing results and conducting meta-analyses, enhancing reliability. However, the abundance of reviews complicates decision-making on sarcopenia management. To address this, SR of SR have emerged, consolidating data from various sources into comprehensive documents. Objective: to assess the isolated impact of dietary interventions on sarcopenia's diagnostic criteria for older individuals. Methods: a study protocol for a SR of SR, following Cochrane and PRISMA recommendations. The search strategy includes the MeSH ‘sarcopenia’ and its subheadings; ‘aged’ and its subheadings; ‘nutrition’ and its subheadings; and filter ‘systematic review’, performed at main databases. Selected studies must include older adults, submitted to nutritional interventions compared to control groups. Quantitative analyses will use inverse variance statistic method (random effects); the effect measures mean difference. Heterogeneity measured with Q-Test. Results: The results of this SR of SR will may provide valuable information about the sarcopenia treatment, deepening the knowledge about. Conclusion: this protocol is reproducible, requires low cost and personnel, and may allow a higher understanding on sarcopenia treatment and management on older people.

Generative adversarial networks (GANs) have become a recent and rapidly developing research topic in Machine Learning. Since their inception in 2014, a significant number of variants have been proposed to address various topics across many fields, and has particularly excelled not only in image and language processing, but also in the medical and data science domains. In this paper, we aim to highlight the significance and advance that these GAN models can introduce in the field of Business Economics, where they have yet to be fully developed. To this end, a review of the literature of GANs is presented in general together with a more specific review in the field of Business Economics wherein only a few papers can be found. Furthermore, the most relevant papers are analysed in order to provide an approach the opportunity to research into GANs in the field of Business Economics.

Plug and abandonment (P&A) operations demand valuable time and resources with operational procedures and materials to establish the well barrier element. This study proposes the use of a water-based fluid as a liquid well barrier element for temporary abandonment, based on esti-mates of its lifespan and survival probability on downhole conditions acquired through acceler-ated life tests. For that, the water-based formulation was tested and exposed to 95, 110, 140 and 150°C, for time intervals ranging from 1 to 10 days. After temperature exposure, the fluid prop-erties were verified and failure was detected by accounting for any deterioration in rheological parameters and/or a substantial increase in filtrate volume. Statistical analysis of failure data was performed in R software using Weibull Model, and fluid average lifespan and survival probability were estimated for P&A temperatures. The results obtained demonstrates that the degradation of the fluid only was observed for 140 and 150°C and is mostly related to the CMC deterioration. The reliability metrics shows that until 80°C the fluid is a promising alternative for temporary abandonment, with no need of monitoring. For higher downhole temperatures, theses metrics should be considered to define the maximum time of operation and requirements for monitoring management in the operation design.

Introduction: Sarcopenia, muscle loss, often coexists with MASLD, a common liver disorder, which is more prevalent in those with sarcopenia. Sarcopenia also increases the risk of liver conditions like steatosis and fibrosis. Studies on sarcopenia in MASLD are common in developed countries, but fewer follow the EWGSOP2 guidelines in Brazil. Aim: to assess sarcopenia prevalence in MASLD patients. Methods: Cross-sectional study conducted at the Gastroen-terology/Hepatology Service of ISCMPA with patients diagnosed with MASLD. The EWGSOP2 criteria were used to evaluate sarcopenia. Categorical data presented as absolute and relative frequency; parametric continuous data ex-pressed as mean±standard deviation; non-parametric continuous data as me-dian and IQR. Gender differences in were analyzed using Fisher's Exact Test or Chi-squared tests, and for continuous variables, T Student tests (parametric) and Mann-Whitney U tests for independent samples (non-parametric). The significance level was set at 5% (p<0.05). Results: The study involved 103 MASLD patients with an average age of 60.39 years, comprising 48 (46.60%) adults and 55 (53.40%) older individuals. Concerning sarcopenia diagnosis, four individuals exhibited decreased muscle strength; two had reduced MME (sarcopenia); and one showed decreased walking speed (severe sarcopenia). Among the participants, 63 (60.6%) were physically active. 35 (62.5%) had mild to moderate steatosis, while 21 (37.5%) had severe steatosis. In terms of EHNA, 13 subjects (24.08%) had moderate to severe EHNA. Regarding fibrosis classi-fication, 68 (72.34%) individuals had undetermined or high probability based on the NAFLD score, with higher prevalence in males (n=23; 88.5%). Fibrosis assessment via liver biopsy revealed 27 (28.72%) in F1 and F2 and 15 (16.96%) in F3 and F4. Stratification of fibrosis into F3 and F4 was more com-mon among men (n=9; 47.4%). Conclusion: Most of the population was physi-cally active. The parameters indicating sarcopenia exceeded the thresholds recommended by EWGSOP2. The prevalence of sarcopenia was low in individuals with MASLD.

This paper presents a methodology to calculate day-ahead wind speed predictions based on historical measurements done by weather stations. The methodology was tested for three locations: Colombia, Ecuador, and Spain. The data is input into the process in two ways: 1) as a single time series containing all measurements, and 2) as twenty-four separate parallel sequences, corresponding to the values of wind speed at each of the 24 hours in the day over several months. The methodology relies on the use of three non-parametric techniques: Least-Squares Support Vector Machines, Empirical Mode Decomposition, and the Wavelet Transform. Also, the traditional and simple Auto-Regressive model is applied. The combination of the aforementioned techniques results in nine methods for performing wind prediction. Experiments using a MATLAB implementation showed that the Least-squares Support Vector Machine using data as a single time series outperformed the other combinations, obtaining the least mean square error.

The smoke house works as a tourism model that will directly impact women living across Quintana Roo communities and small towns, with the idea that this project will empower them, and provide them with a more dignified income, with the end goal to reduce the poverty rates in the state Likewise, to introduce an adequate formula of cuisine that promotes the regional gastronomic identity, since this typology of cultural heritage is linked to the experience of enjoying the state's native food. (Carrillo, J. and Vazquez, L., 2018) It should be noted that the main representatives and transmitters of gastronomy are women, usually housewives. Therefore, a methodology based on the qualitative approach was designed, taking as a basis the ethnographic method, which allows understanding the behavioral patterns of a society. In the first instance, a gastronomic laboratory is proposed for the university, which will later be used as a business model within the tourism industry, directed at people who seek to enjoy cultural and ex-periential tourism. And at the same time, it will benefit communities across the state by generating more income for them. In addition, the project of model smoke kitchen is oriented to go in accordance with the 2030 agenda. Which includes 17 objectives and 169 goals; six of those objectives are directly aligned with this project, and the rest can be observed to relate it in a more indirectly manner. In the same way, a summary of the results obtained by the five-year groundwork is presented, as well as the division of the gastronomy in the state according to the characteristics that conform the gastronomic region.

In the last decade, the integration of robots into agricultural tasks has significantly transformed food production from planting to harvest. The precision and efficiency of a robot allow for specialized crop management in cases such as; plant disease identification, optimization of water and fertilizer use, monitoring of environmental and soil conditions, among others. That is, the adoption of robots in agricultural practices through intelligent automation increases crop yields and decreases environmental impact. Intelligent automation faces contemporary challenges such as climate change and population growth, promoting sustainable food security. Therefore, this article presents a review of the state of the art of modular robots and their applications in agriculture. Modular robots have the ability to reconfigure and adapt to different tasks, promoting versatile solutions for the agricultural sector. These solutions are linked to the robot's control systems, which can be centralized, decentralized, and hybrid. Firstly, centralized control allows for unified management and coordination in high-precision tasks. Secondly, the decentralized approach offers flexibility and robustness in changing environments where adaptability is required. Thirdly, hybrids incorporate features of both control types balancing control and autonomy to increase efficiency and effectiveness in practical applications. In some cases, control systems incorporate bio-inspired motion control techniques, where the robot mimics natural movements and behaviors to improve its adaptability in performing a task. For example, the chemosynthesis model, which is a biological process where bacteria convert an inorganic compound into energy, has been adapted for individual robots to explore and navigate their environment. Therefore, this article presents an overview of modular robots, the incorporation of bio-inspired motion control techniques, and their convergence towards the sustainable solution of contemporary problems in the agro-industry.

Lymphoma is the most prevalent type of cancer in cats, and the search for alternative treatments is of utmost importance given the significant number of animals that exhibit tumor recurrence or are unresponsive to conventional chemotherapy treatment. Oncolytic viruses possess a unique ability to target and eliminate cancer cells while simultaneously stimulating an immune response against these malignant cells. The present study aimed to explore the oncolytic potential of Newcastle Disease Virus expressing green fluorescent protein (NDV-GFP) in a feline leukemia virus (FeLV)-positive lymphoma cell line. Our research suggests that NDV-GFP has a propensity to selectively target, infiltrate, and replicate with-in feline lymphoma cells, resulting in the induction of apoptosis in these cells, as opposed to non-tumor cells. Therefore, our research provides evidence supporting the development of novel oncolytic therapies based on NDV for the treatment of feline lymphomas.

Developing a low-cost wireless energy meter with power quality measurement for smart grid applications represents a significant advancement in efficient and accurate electrical energy monitoring.In increasingly complex and interconnected electrical systems, this device is essential in various applications, such as smart grids, enabling real-time energy usage monitoring. In such a context, smart meters expand the possibilities for sustainable and efficient energy use and promote better utilization of energy sources, especially non-renewable ones. According to the 2020 International Energy Agency (IEA) research, non-renewable energy sources represent 65% of the global total. The smart meter developed in this work is built based on the ESP32 microcontroller and easily accessible components, using a user-friendly development platform that offers a cost-effective solution while ensuring reliable performance. The main objective of the smart meter development was to enhance the software and simplify the hardware. Unlike traditional meters that perform electrical parameter calculations using complex hardware circuits, this project performed the calculations directly on the microcontroller. This approach reduced the complexity of the hardware, simplifying the meter’s design. With the high-performance processing capability of the microcontroller, efficient and accurate calculations of electrical parameters were achieved without the need for additional circuits. This software-driven approach with simplified hardware brought benefits such as reduced production costs, lower energy consumption, and increased meter development and updates flexibility. Furthermore, the integrated wireless connectivity in the microcontroller enables the transmission of collected data to remote monitoring systems for later analysis. The developed smart meter offers cost, energy efficiency, and flexibility benefits. It represents an innovative, efficient, and versatile solution for smart grid applications.

Plankton monitoring by microscopy offers long-term ecological perspective of plankton com-munities but different detection approaches are biased uniquely. Genetic identification of marine plankton has become standard but is still not used in routine monitoring. This study assessed the diversity of plankton taxa using 18S high throughput sequencing from 2011-2012 from small-volume (~200ml) samples from the Water and Microplankton Sampler (WaMS) deployed on the Continuous Plankton Recorder platform (CPR). The 18S-HTS survey revealed a bias towards heterotrophic taxa, and phototrophs under 10µm within the photosynthetic community. In comparison with phytoplankton microscopic counts from the CPR survey and Western Channel Observatory station L4, only 8-12 taxonomic families were common to all three surveys, with a bias towards larger diatoms and dinoflagellate taxa in microscopy surveys. The WaMS survey detected a contrasting but complementary taxa set to that of microscopic surveys. Additional Quantitative PCR was carried out on the picoeukaryotic pelagophyte, Aureococcus anophagefferens, and the nanoeukaryotic potential harmful algae, Pseudo-nitzschia delicatissima, from 2011-2013. This confirmed the persistence presence of A. anophagefferens in the Western Channel and an elevated abundance of both species in 2011. Species specific seasonality were distinct from those of aggregrate phytoplankton groups.

Brain models present a viewpoint on the fundamental structural components of the brain and their mutual organization, generally relative to a particular concept of the brain axis. A model may be based on adult brain structure or on developmental morphogenetic aspects. Brain models usually have functional implications, depending on which functional properties derive from the postulated organization. This essay examines the present scenario about brain models, emphasizing the contrast between columnar or other longitudinal models and transverse subdivisional neuromeric models. In each case, the main functional implications and apparent problems are explored and commented. Particular attention is given to the modern molecularly based ‘prosomeric model’, which postulates a set of 20 transverse prosomeres as the developmental units that serve to construct all the cerebral parts and the particular typology of many different neuronal populations within the forebrain and the hindbrain, plus a number of additional spinal cord units. These metameric developmental units (serially repeated, but with unique molecular profiles) confer to this model remarkable functional properties based mainly on its multiplicity and modularity. Many important brain functions can be decomposed into subfunctions attended to by combined sets of neuronal elements derived from different neuromeres. Each neuromere may participate in multiple functions. Most aspects related to creation of precise order in neural connections (axonal navigation and synaptogenesis) and function is due to the influence of neuromeric anteroposterior and dorsoventral positional information. Research on neuromeric functionality aspects is increasing significantly in recent times.

Hidden markov models are a very useful tool in the modelling of time series and any sequence of data. In particular, they have been successfully applied to the field of mathematical linguistics. In this paper, we apply a hidden markov model to analyze the underlying structure of an ancient and complex manuscript, known as Voynich's manuscript, that remains still undeciphered. By assuming a certain number of internal states representations for the symbols of the manuscript we train the network by means of the $\alpha$ and $\beta$-pass algorithms to optimize the model. By this procedure, we are able to obtain the so-called transition and observation matrices in order to compare with known languages concerning the frequency of consonant and vowel sounds. From this analysis, we conclude that transitions occur between the two states with similar frequencies to other languages. Moreover, the identification of the vowel and consonant sounds matches some previous tentative bottom-up approaches to decode the manuscript.

The presence of heavy metals in cocoa crops is currently a serious problem for farmers and producers in various regions of Peru. Exports of cocoa and its derivatives to European markets are threatened by possible indications of contamination of heavy metals such as Cadmium (Cd) in cocoa beans for export, some at levels higher than those allowed by food regulations established by European Community, which are oriented to consumer protection. The possible sources of cadmium contamination in cocoa crops can be due to natural activities, such as volcanic activities, erosion processes and sedimentation in rocks that contain minerals with a high content of heavy metals (Greenockite, Burnsite, Hawleite, among others), and by anthropogenic activities such as: mining of associated deposits, agriculture (use of fertilizers), smelting of minerals and burning of fossil fuels. Currently, there is no information about contents of heavy metals in areas located in The Campo Verde-Honoria-Tournavista corridor (Ucayali Region and Huanuco Region), due to this, in this work we make a study of this region. A methodology will be used to take cocoa samples from the seed and soil in these areas, and then through chemical analysis, determine the concentrations of heavy metals, using an atomic absorption spectrophotometer. As a consequence of this study, we determined and concluded that the concentrations of cadmium obtained in soils are slightly higher than European standards allowed. Therefore, with this information we prepare a geochemical cadmium map in soils for the study area, which will help cocoa producers to identify areas that exceed the allowed cadmium values, in order to comply with standards that European Community demands in relation of concentration levels of heavy metals (Cadmium) in chocolate. In this way, we can carry out in the future a mitigation plan for areas with cadmium problems, which allows to reduce their content in order to export the product without any problem. .

In this paper, we introduce a model for the automatic generation of literary sentences in French. It is based on algorithms that we have previously used to generate sentences in Spanish and Portuguese, and on a new corpus consisting of literary texts in French that we have constructed, called [FR]. Our automatic text generation algorithm combines language models, shallow parsing and deep learning, artificial neural networks. We have also proposed and implemented a manual evaluation protocol to assess the quality of the artificial sentences generated by our algorithm, by testing if they fulfill four simple criteria. We have obtained encouraging results from the evaluators for most of the desired features of our artificially generated sentences.

Different types of disasters, whether natural or human character, lead to the significant loss of human lives. In the latter case, the quick action of identification of corpses and human remains is mandatory. There are a variety of protocols to identify victims, however, genetics is one of the tools that allow an exact identification of the victim. However, several factors may interfere with this identification, from the biological samples’ degradation not allowing the analysis of nuclear information, to failure to dispose of biological samples from family members. Access to certain family members could be a determinant of the proper choice of genetic markers that allow the identification of the victim, or his/her inclusion in a given genetic maternal or paternal lineage. With the new advances in the genetic field, it is expected to allow soon the identification of victims from disasters only with his/her biological postmortem samples, being possible to draw a robot portrait and its most likely physical characteristics. In all cases, genetics is the only modern tool with universal character and can be used in essentially all biological samples, giving and identification of more or less accurate statistical character, depending on whether nuclear or lineage markers are used.

Abstract: Background: In contrast to conventional definitions, the contemporary conceptualization of adulthood emphasizes psychological characteristics over sociodemographic milestones. Concurrently, there is a growing proposition that individuals' perceptions of adulthood exert a substantial influence on the mental well-being of adolescents and adults. However, empirical examination of this hypothesis has been notably limited to date. Method: This study applied some adulthood markers, and multiple mental health indices (including Well-being, Optimism, Alexithymia, Satisfaction with life, Goldberg's index of mental health, Dark triad, and dimensional personality disorders) to a community sample comprising 1772 individuals in Spain, spanning ages from 16 to 93 years. Results: The findings support the overarching hypothesis, as perceptions of adulthood exhibit significant associations with almost all measured mental health indices, especially with those conforming a factor of Negative emotions. These associations persist even after accounting for age and socioeconomic status, and in alignment with the psychological paradigm of adulthood, they demonstrate stability across different age cohorts. Conclusions: The study establishes that such perceptions of adulthood represent a modifiable factor contributing to positive mental health. The implications of these findings for the formulation of public policies aimed at promoting mental health in the context of adulthood are deliberated, as well as a number of future studies.

The study´s goals were to determine the health status of a group of heart transplant recipients (HTR) and their level of physical activity and to compare the health status among them and with a group of healthy sedentary individuals. Fifty-four HTR and eighteen S were assigned to four groups, according to their level of physical activity (determined with The International Physical Activity Questionnaire); patients with a low, a moderate and a high level of physical activity (HTRL, HTRM and HTRH, respectively) and sedentary individuals (S). Participants underwent a basic blood analysis and several tests to assess their cardiovascular, neuromuscular, functional mobility condition and their quality of life. The S and HTRH were very similar in terms of BP, HR and blood analysis while HTRM and HTRL differed from both S and HTRH in these parameters. Regarding the cardiovascular, neuromuscular, functional mobility, and quality of life variables assessed in this study, HTRH showed the best results across all of them, followed by S, HTRM, and HTRL. It is suggested that the weekly level of physical activity of HTR should be high, what might help them to enhance their health and quality of life.

This paper aims to establish a current relationship between pharmaceutical sciences and the development of perfumes and fragrances, which bring significant economic benefits and whose added value is among other professionals, the one made by professionals in Pharmacy. For this purpose, historical data are used as a starting point and galenic, chemical and botanical aspects are discussed in a transversal way. In this sense, it must be taken into account that in the case of Spanish pharmacy, it is closely linked to the knowledge and use of plants. Sources such as Web of Science (WOS) and databases such as Scopus, monographs and various web pages (where scientific-technical documents appear) have been used. The results and discussion are based on the selection of the 50 plant species most commonly used in high quality fragrances. Therefore, this publication should be considered as an approach to this subject based on an analysis of a representative sample of data. Some characteristics of perfumes (classification according to the concentration of essential oils and combination of plant extracts) are presented beforehand. They also briefly compile the traditional and modern ways in the treatment of these extracts. The main focus of this work is the botanical and chemical analysis of these described plants, pointing out their common name, correct botanical name, geographical place of origin, used part of the plant and main molecules. The 50 botanical species belong to 27 families of angiosperms and are represented in a large part of the phylogenetic tree of botanical systematics. The most significant families are aromatic: Rutaceae (16.7%), Lamiaceae (16.7%) and Apiaceae (6.5%). The most represented genus is Citrus (with seven species or hybrids). However, it should be noted that natural extracts of good quality natural fragrances may be supplemented with chemically synthesized molecules. Of the 50 botanical species selected, 84% of the extracts have their origin in Tropical Asia, the Middle East and the Mediterranean region. This figure generally coincides with the percentage of medicinal plants (or their extracts) admitted by the European Pharmacopoeia. All parts of a plant (depending on which one it is) can be a source of molecules for the elaboration of these products. The most commonly used parts to obtain extracts are flowers (34%) and leaves (30%), a biological circumstance that is explained in this work. On the opposite side are the resins (10%), rhizomes and roots (8%). In this work, 110 molecules have been found that are part of the essences of perfumes and fragrances, the most frequent are: linalool, limonene, 1,8-cineole, eugenol and derivatives, geraniol, vanillin and derivatives, β-cariophyllene, p-cmene and farnesene and derivatives (3.64%). However, in order to elaborate a quality perfume, many other molecules must be taken into account, according to the creative experience of the perfumer, which is subject to confidentiality and chemical analysis according to current legislation, which would avoid fraud, allergy and dermatitis problems.

Novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants of concern (VOC) are constantly threatening global public health. With no end date, the pandemic still persists with the emergence of novel variants that threaten the effectiveness of diagnostic tests and vaccines. Mutations in the Spike surface protein of the virus are regularly observed in the new variants, potentializing the emergence of novel viruses with different tropism from the current ones, which may change the severity and symptoms of the disease. Growing evidence has shown that mutations are being selected in favor of variants that are more capable of evading the action of neutralizing antibodies. In this context, the most important factor guiding the evolution of SARS-CoV-2 is its interaction with the host’s immune system. Thus, as current vaccines cannot block the transmission of the virus, measures complementary to vaccination, such as the use of masks, hand hygiene, and keeping environments ventilated remain essential to delay the emergence of new variants. Importantly, in addition to the involvement of the immune system in the evolution of the virus, we highlight several chemical parameters that influence the molecular interactions between viruses and host cells during invasion and are also critical tools making novel variants more transmissible. In this review, we dissect the impacts of the Spike mutations on biological parameters such as (1) increase of Spike binding affinity to hACE2; (2) bound time for the receptor to be cleaved by the proteases; (3) how mutations associate with increase of RBD up-conformation state in the Spike ectodomain; (4) expansion of uncleaved Spike protein in the virion particles; (5) increment of Spike concentration per virion particles; and (6) evasion of the immune system. These factors play key roles in the fast spreading of SARS-CoV-2 variants of concern, including the Omicron.

Abstract Chaga´s disease caused by Trypanosoma cruzi infections is included in the group of neglected diseases, and efforts to develop new therapeutic or immunoprevention approaches have not been successful. After the publication of the T. cruzi genome, the number of molecular and biochemical studies on this parasite have increased considerably, many of which are focused on families of variant-surface-proteins, especially the trans-sialidases, mucins and mucin-associated proteins. The disperse gene protein 1 family (DGF-1) is one of the most abundant families in the T. cruzi genome, however, the large gene size, high copy numbers, and low antibody titers detected in infected humans make it an unattractive study target. Here, we argue that the DGF-1 gene family although not being the most obvious participant of the host-parasite immunological gamble, where T. cruzi appears to have the upper hand, it may play an important role in more basic host-parasite interactions that deserve further examination.

This research undertakes a quantitative exploration of the impact of procurement mo-dalities on economic efficiency and inclusive procurement within the Dominican Repub-lic's public sector. Applying data science methodologies and machine learning techniques, this study analyzes a rich dataset of public procurement contracts spanning from 2018 to 2023. A focus is placed on understanding how different procurement modalities affect contract amounts and processing times—two key indicators of economic efficiency. Machine learning models, including Random Forest and Gradient Boosting, are em-ployed to predict these essential metrics across different procurement modalities. The findings indicate a significant positive correlation between certain procurement modali-ties and economic efficiency. The machine learning models reveal that procurement strategies focused on local sourcing and transparent bidding processes tend to yield high-er economic returns and more equitable outcomes. This research underscores the poten-tial of quantitative analysis to inform procurement policies, fostering a more economi-cally efficient and inclusive procurement ecosystem in the Dominican Republic's public sector. The insights garnered from this study could have significant implications for the design of more inclusive procurement strategies, contributing to socio-economic growth and corruption reduction in the Dominican Republic.