A humidity-sensitive demand-controlled ventilation system is known for many years. It has been developed and commonly applied in regions with an oceanic climate. Some attempts were made to introduce this solution in Poland in a much severe continental climate. The article evaluates this system's performance and energy consumption applied in an 8-floor multi-unit residential building, virtual reference building described by the National Energy Conservation Agency NAPE, Poland. The simulations using the computer program CONTAM were performed for the whole hating season for Warsaw's climate. Besides passive stack ventilation that worked as a reference, two versions of humidity-sensitive demand-controlled ventilation were checked. The difference between them lies in applying the additional roof fans that convert the system to hybrid. The study confirmed that the application of demand-controlled ventilation in multi-unit residential buildings in a continental climate with warm summer (Dfb) leads to significant energy savings. However, the efforts to ensure acceptable indoor air quality require hybrid ventilation, which reduces the energy benefits. It is especially visible when primary energy use is analyzed.

Neutropenia is a common adverse event during myelosuppressive oncological chemotherapy, predisposing to febrile neutropenia (FN). Patients with coexisting moderate-to-severe chronic kidney disease (CKD) have an increased risk of FN, included in the guidelines for the primary prophylaxis of FN. However, this does not include mild kidney function impairment with esti-mated glomerular filtration rate (eGFR) 60–89 ml/min/1.73m2. This prospective study analyzed the risk of neutropenia in patients on chemotherapy without indication for the primary prophy-laxis of FN. The study enrolled 38 patients starting chemotherapy, including 26 (68.4%) patients aged 65 years or more. The median duration of follow-up was 76 days. The methodology of cre-atinine assessment enabled the use of the newly recommended CKD-EPI formula for identifying patients with a mild reduction of glomerular filtration. Sixteen (42.1%) patients developed at least G2 neutropenia without episodes of FN. Only five (13.1%) patients had eGFR<60ml/min/1.73m2, while 15 (62.5%) eGFR< 90ml/min/1.73m2. The relative risk of neutro-penia in patients with impaired eGFR was over six times higher than in patients with eGFR>90 ml/min/1.73m2 (RR=6.08; 95%CI:1.45–27.29; p< 0.01). Our observation indicates that even a mild reduction in eGFR is a risk factor for the development of neutropenia and a potential risk factor for FN.

Production of biofuel from lignocellulosic biomass is relatively low due to the limited knowledge about natural cell wall loosening and cellulolytic processes in plants. Industrial separation of cellulose fiber mass from lignin, its saccharification and alcoholic fermentation is still cost-ineffective and environmental unfriendly. Assuming that the green transformation is inevitable and that the new sources of raw materials for biofuels are needed, we decided to study cell death - a natural process occurring in plants in a context of reducing the recalcitrance of lignocellulose for production of second generation bioethanol. “members of the enzyme families responsible for lysigenous aerenchyma formation were identified during the root hypoxia stress in Arabidopsis thaliana cell death mutants. The cell death regulatory genes, LESION SIMULATING DISEASE 1 (LSD1), PHYTOALEXIN DEFICIENT 4 (PAD4) and ENHANCED DISEASE SUSCEPTIBILITY 1 (EDS1) conditionally regulate the cell wall when suppressed in transgenic aspen. During four years of growth in the field the following effects were observed: lignin content was reduced, the cellulose fiber polymerization degree increased and the growth itself was unaffected. The wood of transgenic trees was more efficient as a substrate for saccharification, alcoholic fermentation and bioethanol production. The presented results may trigger the development of novel biotechnologies in the biofuel industry.

Aim of the presented research was to develop an optical sensing system to investigate the demineralization process of the bones. Optical measurement techniques are widely used and increasingly adapted in biological and biomedical applications due to their non-destructive nature and safety. Optical examination of the bone condition could facilitate clinical trials and improve the safety of patients. The authors used a set of complementary methods: polarization-sensitive optical coherence tomography (PS-OCT) and Raman spectroscopy. To stimulate the process of demineralization and gradual removal of the hydroxyapatite, the test samples of chicken bones were placed into 10% acetic acid. Measurements were carried out in two series. The first one took two weeks with data acquired every day. In the second series, the measurements were made during one day at an hourly interval (after 1, 2, 3, 5, 7, 10, and 24 hours). Raman spectroscopy was used to evaluate the disappearance of the hydroxyapatite. The relation between the content of hydroxyapatite and images recorded using OCT was analyzed and discussed. Moreover, the polarization properties of the bones have been evaluated. Based on OCT images, the retardation angles of the bones have been calculated. This work presents a preliminary study on the mechanism of bone demineralization and confirms the potential of the applied optical methods.

Rocks are materials with a wide variety of structures and properties. These can be unprocessed conglomerates of conglomerated minerals as well as crystallized outcrop or metamorphic rocks. Their processing, especially shaping, poses many technological difficulties. Therefore, it is very important to answer the question of how these natural materials yield to high-pressure water jet and abrasive water. It is equally important to determine the effect of key process parameters such as pressure, water nozzle diameter and feed rate on cutting efficiency. The first two parameters determine the water output and power of the jet, while the third determines the jet erosion time per unit volume of material. Their interdependence, using appropriate evaluation indicators, allows to determine the energy intensity of processing and directions for its minimization.

Modern oncological therapy utilizes various types of immunotherapy. Immune checkpoint inhib-itors (ICIs), chimeric antigen receptor T cells (CAR-T) therapy, cancer vaccines and bispecific an-tibodies are improving patients’ outcomes. However, stimulation of the immune system, benefi-cial in terms of fighting against cancer, generates the risk of harm to other cells in a patient's body. Kidney damage belongs to the relatively rare adverse events (AEs). Best described, but still, su-perficially, are renal AEs in patients treated with ICIs. International guidelines issued by Euro-pean Society for Medical Oncology (ESMO) and American Society of Clinical Oncology (ASCO) cover the management of immune-related adverse events (irAEs) during ICI therapy. There are scarce data concerning renal adverse drug reactions of other immunotherapeutic methods. This implicates the need for the collection of safety data during ongoing clinical trials and in the re-al-life world to characterize the hazard related to the use of new immunotherapies and manage-ment of irAEs.

Anabantidae is a large and diverse group of fish cultured both under aquaculture conditions and as hobbyists. These fish share a common structural feature in the form of an additional respiratory organ. Despite the enormous availability of these fish worldwide, little is known to date about their feeding preferences in husbandry and their influence on homeostasis under both industrial and domestic conditions. This study describes, for the first time, the structure of the digestive tracts of two Anabantoidei fishes: African bushfish (Ctenopoma acutirostre) and paradise fish (Macropodus opercularis). The overall structure of the digestive tract and its histological structure were analyzed and compared in both fish species. In conclusion, it was shown that physiological predispositions indicate a predominance of omnivorous fish traits in the M. opercularis, in contrast to the C. acutirostre, which has several morphological traits indicating a greater adaptation to carnivory, particularly ichthyophagy. The results obtained will allow further research to be conducted in the future to optimize the nutrition and feeding of these fish and to develop appropriate dietary recommendations.

SIGNIFICANCE Putting worth on research and selection of studies by importance are crucial in medical innovation. Practical applications include choosing personal study topics, publication review, study grant selection, and decisions of spending or misspending billions in public health. Multiple studies raised alarm that current methods perform poorly in reproducibility, prediction of best research and objectivity. I propose using the metrics how much disease burden is reduced and calculating objective, numerical research value. The concept is that worth of medical research is not subjective but can be reproducible and numerically quantified. The method increases transparency by giving decision makers an externally accountable proof, and frees peer reviewers to check scientific integrity. Its numerical form can capture small differences important in competition between studies. ABSTRACT Finding value and selecting knowledge by importance are crucial in medical innovation. Applications include individuals designing research, funding organizations selecting grants, journals – publications, institutions – priorities in public health and health policy, and decision makers spending or misspending billions of research funds. Currently finding value of knowledge is done by peer review together with checking scientific integrity. Multiple studies raised alarm that it performs poorly in prediction of highest citations, bias, transparency and quality. The resulting problems include perception of slow medical progress and wasting funds and time. I introduce a standard, objective and numerical method for finding value of medical research. It measures disease burden prevented by new knowledge contained in a study or a publication. In its simple form, it is calculated by multiplying disease prevalence, disease burden, and efficacy of the therapy. It can be modified for risk of failure, multi-disease effect and for ethical considerations. The process is described step-by-step in terms common in medical practice. A quick estimate is often sufficient. The advantage is objectivity, since it is calculated from real world data. This gives transparency and externally accountability of decision making. The second advantage is a numerical form. This can measure small differences in research value which, in sharp competition, determine which studies are selected. A researcher can calculate the value of own future effort. Institutions might ask to provide it at submission. The method is also applicable to broad policy analysis, objective evaluation of scientific achievement and bibliometric studies.

Ultra-wide field optical coherence tomography (UWF-OCT) has been recently introduced into clinical ophthalmological practice. To date, there is little data on the reference values of retinal thickness (RT) and choroidal thickness (CT) measured with this technique. This study aimed to analyze the variance of RT and CT in healthy eyes with UWF-OCT tests performed with the largest available scan size of 23 x 20 mm. The data were analyzed with reference to the patients' age, gender, and the axial length of the eyeball. The results of UWF-OCT scanning enabled us to picture the shape of the retina and choroid in a large portion of the eyeball. Both anatomical entities become significantly thinner at the periphery. The peripheral CT is greater in the upper and temporal sectors; the RT is higher in the nasal compared to the temporal sectors. Both choroid and retina lose thickness with age, however, CT and RT do not show a statistically significant correlation with the axial length after adjusting for age and gender. Age-related variations in thickness are especially prominent in the choroid. The CT in UWF-OCT testing is significantly greater in females while the RT is greater in males. UWF-OCT testing provides additional information on the anatomical structure of the retina and choroid compared to standard-field OCT

Wide-field (WF) retinal imaging is becoming a standard diagnostic tool for diseases involving the retinal periphery. Technological progress elicited the advent of wide-field optical coherence tomography (WF-OCT) and WF-OCT angiography (WF-OCTA) examinations. This review presents the results of studies that analyzed the implementation of these procedures in clinical practice and refers to them as traditional and ultra-wide-field fluorescein angiography (UWF-FA). The PUBMED search was performed using the terms WF-OCT OR WF-OCTA OR UWF-FA AND the specific clinical entity, including diabetic retinopathy (DR), retinal vein occlusion (RVO), Coats disease, peripheral retinal telangiectasia, peripheral retinal degeneration, lattice degeneration, and posterior vitreous detachment. The analysis only included the studies in which the analyzed field of view for the OCT or OCTA exam was larger than 55 degrees. The evaluation of the extracted studies indicates that WF imaging with OCT and OCTA provides substantial information on retinal disorders involving the retinal periphery. Vascular diseases, such as DR or RVO, can be reliably evaluated using WF-OCTA with results superior to standard-field fluorescein angiography. Nevertheless, UWF-FA provides a larger field of view and still has advantages over WF-OCTA concerning the evaluation of areas of non-perfusion and peripheral neovascularization. Detailed information on the vascular morphology of peripheral changes should be obtained via WF-OCTA, not angiographic examinations. WF-OCT can serve as a valuable tool for the detection and evaluation of vitreoretinal traction, posterior vitreous detachment, and peripheral retinal degeneration, and guide therapeutic decisions on a patient’s eligibility for surgical procedures.

Paper discussed the problem of proper process of gas-freeing and ventilation of vessel cargo tank after washing process in aim to the entrance into the tank and its inspection. Correct assessment of atmosphere composition into the cargo tank is a basic condition of safe entrance and work of a crew. It should be done following actions: assessment of flammability hazard, the presence of other toxic gases for human and oxygen concentration. In the aim ship-owner should prepare adequate procedures: before entrance, during work and on emergency situations. On a vessel the assessment performs responsibility (entitled) officer whose decisions are crucial for the safety of prosecuting operations. The one of primary problem is proper (adequate) assessment of oxygen concentration in the air into the tank (enclosed spaces) after the measurement which should be properly interpreted. It concerns basically such situations when the oxygen concentration into the tank after measure leads the value over 22% or below 20.6% of volume (mole) contribution (v/v).

The article presents the issues related to load sharing in direct current grid and a novel control method which has advantages over known solutions. Unlikely of many similar sounding papers this article shows attempt of creation fully controllable non-isolated system which allows load sharing between permanent magnet alternator equipped with machine side converter (MSC) and dual active bridge (DAB) tied to batteries or supercapacitor. The power sharing is essential feature of parallel connected direct current generators and all types of voltage sources in this way are contributing power to the system. Such system should have possibility of the rapid voltage build up in the case of sudden electrical load changes. To keep the optimal efficiency of the alternator the rotational speed changes according to proper mapping of driving combustion engine. When rotational speed is too low then sudden electrical load can cause significant voltage drop and time needed for voltage build up will vary according to RPM increase. In such situations the undervoltage system can trip the breaker and finally there may be a blackout. To avoid such problem the DC systems which consist of batteries and supercapacitor were introduced. System components include a self-excited synchronous generator (SESG) operating at variable shaft speed as well as batteries and supercapacitors that provide electricity for sudden electrical load changes on the distribution grid. The core of presented system is in power distribution method which consists of programmed controllers structure allowing precise currents distribution. A novelty in the proposed method is the use of a cascaded system of current and DC voltage regulators which allows power distribution precise control. In contrary to previously presented solutions, the proposed system allows fast and accurate control of currents loading parallel connected DC voltage sources for wide range generator speed changes. In presented solution both converters have been equipped with Schottky diodes preventing flow of equalizing currents between closed transistors in the parallel mode of operation. An experimental test-stand of the described system is presented with its theoretical basis and experimental results.

One method of creating a brass coating is through electrodeposition, which is most often completed in cyanide galvanic baths. Because of the toxicity of cyanides, many are working on the development of cyanide-free baths, which are promising but not satisfactory to replace the classic methods. The purpose of the study was to explore a new generation of non-aqueous cyanide-free baths based on 1-ethyl-3-methylimidazolium acetate ionic liquids. The study involved the formation of copper, zinc, and brass coatings. The influence of the bath composition, cathodic current density, and temperature was determined. The obtained coatings were characterized by their morphology, chemical composition, roughness, and corrosion resistance. It was found that the structure of the obtained coatings is strongly dependent on the process parameters. The three main structures observed were fine-grained, porous, and olive-like. To the best knowledge of the authors, it is the first time the olive-like structure was observed in the case of an electrodeposited coating. The Cu-Zn coatings consisted of 19–96 at.% copper and exhibited relatively strong corrosion resistance. High improvement of corrosion properties was found in the case of copper and brass coatings with an olive-like structure.

In this study, a new approach to pesticide permeation through the apple peel into the pulp is discussed. The tested compounds can be classified, based on mode of action, as systemic (boscalid, cyprodinil, pirimicarb, propiconazole and tebuconazole) or contact (captan, cypermethrin and fludioxonil) pesticides. The barrier effect was assessed using a Franz flow-type vertical diffusion cell system. Residue analysis was performed using a modified quick, easy, cheap, efficient, rugged and safe (QuEChERS) extraction method coupled to gas chromatography with tandem mass spectrometry (GC-MS/MS). The limits of detection (LODs) ranged between 2.6 µg kg-1 (pirimicarb) and 17 µg kg-1 (captan), with the coefficient of variability (CV) lower than 6%, while recoveries ranged from 85% (boscalid) to 112% (captan) at 0.1 and 1 mg kg-1 spiked levels. The highest peel penetration was observed for pirimicarb, captan and cyprodinil, with cumulative permeation of 90, 19 and 17 µg cm-2, respectively. The total absorption was in the range from 0.32% (tebuconazole) to 32% (pirimicarb). Only cypermethrin was not quantitatively detected in the pulp and its use can be recommended in crop protection techniques. The obtained results indicate that molecular weight, octanol-water partition coefficient and water solubility are important parameters determining the process of pesticide absorption.

This study explored the development of neuromuscular fatigue responses during progressive cycling exercise. The sample comprised 32 participants aged 22.0 ± 0.54 years who were assigned into three groups: endurance-trained group (END, triathletes, n = 10), strength-trained group (STR, body-builders, n = 10), and control group (CON, recreationally active students, n = 12). The incremental cycling exercise was performed using a progressive protocol starting with a 3 min resting measurement and then 50 W workload with subsequent constant increments of 50 W every 3 minutes until 200 W. Surface electromyography (SEMG) of rectus femoris muscles was recorded during the final 30 s of each of the four workloads. During the final 15 s of each workload, participants rated their overall perception of effort using the 20-point RPE scale. Post-hoc Tukey’s HSD testing showed significant differences between END and STR groups in MF and MPF across all workloads (p < 0.001 and p < 0.01, respectively). Athletes from END group had significantly lower AEMG responses than those from STR (p = 0.0093) and CON group (p = 0.0006). Increasing RPE points from 50 to 200 W were significantly higher in STR than in END group (p < 0.001). In conclusion, there is a significant variation in neuromuscular fatigue profiles between athletes with different training backgrounds when a cycling exercise is applied. The approximately linear trend of the SEMG and RPE values of both groups of athletes with increasing workload support the increased skeletal muscle recruitment with perceived exertion or fatiguing effect.

The dynamic increase in non-cash transactions is a global trend in payments. In rich countries, cashless transactions have been dynamically replacing cash. The fact that non-cash transactions are pro-ecological is worth noting. This means that it is conducive to sustainable development of a country's economy. The purpose of this study is to analyze the process of changes in non-cash payments in Poland, against the background of payment card use for ATM cash withdrawals. The tool used to analyze the potential process of cash transaction erosion caused by non-cash payments is a two-equation econometric model with feedback. For this purpose, statistical data, obtained from the National Bank of Poland was used. Accordingly, clarification is expected regarding the question of whether the Polish payment system is heading towards a dominance of cashless transactions or not. The reaction, in the form of changes in the value of non-cash payment card transactions in Poland, affected by the increase in the wealth of citizens, measured by an increase in the average pay, was examined. The modeling results were used to estimate forecasts of the share of non-cash transactions in the total value of market transactions and of the share of ATM cash withdrawals in the total value of transactions.

The deep neural network - BERT model (Bidirectional Encoder Representations from Transformers) and the stocks cumulative abnormal return is used in this article to analyze the sentiment of financial texts. The proposed approach, unlike those used so far, does not require the creation of dictionaries, takes into account the broad context of words and their meaning in financial texts, eliminates the problem of ambiguity of words in various contexts, does not require manual labelling of data and is free from the subjective assessment of the researcher. The sentiment of financial texts in the meaning presented in this paper is directly related to the market reaction to the information contained in these texts. For texts belonging to one of the two classes (positive or negative) with the highest probability the BERT model gives the results of predictions with a precision level of 62.38% for the positive class and 55% for the negative class. The results at this level can be used in event study, market efficiency research, investment strategy development or support of investment analysts using fundamental analysis.

Rodents are known to be reservoirs of Toxoplasma gondii and keep the parasite circulation in the environment. We conducted biomonitoring to assess the role of sylvatic rodents in maintaining T. gondii and to analyse the prevalence and seroprevalence of the parasite in seven wild rodent species. Rodents were collected in our study sites (woodland and open grasslands) located in northeastern Poland and dissected. We collected brain, spleen, blood and serum samples. We applied both molecular (PCR assay, nested-PCR assay) and serological (ELISA and agglutination tests) methods to indicate the best approach for application in the biomonitoring of T. gondii in small mammals. We screened samples from 95 individuals sing PCR assays and found no T. gondii DNA. The agglutination test showed no signal. We found antibodies against T. gondii in 6 sera samples out of 74 analysed (seroprevalence = 8.11% [4.0-17.1]). Our results confirm that rodents participate in the life cycle of T. gondii as reservoirs of this parasite in the sylvatic environment. However, biomonitoring should be performed with the ELISA tests to search for T. gondii antigens, rather than a molecular approach only.

Sources of resistance to powdery mildew in wild barley (Hordeum vulgare subsp. spontaneum) collected in Jordan, Lebanon, and Libya Jerzy H. Czembor 1, *, Elżbieta Czembor 1 1 Plant Breeding and Acclimatization Institute – National Research Institute (IHAR-PIB), Radzikow, 05-870 Błonie, Poland; [email protected] (E.C.) *Correspondence: [email protected]) Abstract Barley powdery mildew (BPM) is caused by the pathogen Blumeria graminis f.sp. hordei (Bgh). It is an economically important disease and plant pathologists are looking for new sources of resistance to BPM. Barley genetic resources present in gene banks are often a rich source of disease resistance to be used by breeders. These new sources of resistance to BPM are often used in combination (pyramiding) with those that are already used in modern cultivars. Barley accessions, including the wild subspecies Hordeum vulgare subsp. spontaneum (Hvs), are stored in many gene banks and often are a valuable source of economically important characteristics. This source of biodiversity should be more efficiently used to improve barley in the process of plant breeding. However, their proper characterization and availability are urgently needed. The resistance to BPM in 81 accessions of wild barley (Hvs) collected in Jordan (47), Lebanon (23), and Libya (11) was investigated. The seed samples of these accessions were obtained from the ICARDA gene bank and collected in 10 expeditions from 1981 to 1995. Twenty European differential isolates of BPM were used to select accessions with efficient resistance. Thirty-one resistant single plant lines were selected from 15 accessions from Jordan and Libya based on tests performed with the most avirulent isolate of Bgh available. These resistant single plant lines were tested for the presence of specific resistance genes using a differential set of Bgh isolates. After analysis of obtained results, it was concluded that all tested 31 single plant lines of wild barley have genes for resistance that are not represented in the Pallas isolines differential s. Twenty-six lines of Hvs selected from accessions originated in Jordan and Libya showed resistance reaction to all isolates used. Identified new sources of effective resistance to BPM in single plant lines of Hvs will be further tested and used in barley pre-breeding programs. Keywords: Blumeria graminis; resistance genes; resistance; germplasm; gene bank;

The paper presents an error model of a measurement chain containing link performing discrete wavelet transform algorithm which is most often the last stage of measurement signal processing. The goal is to determine the uncertainty budget of the input quantities of the wavelet transform algorithm. The error model takes into account parts of analog, analog-to-digital and digital processing, describing the properties of subsequent fragments of the chain using their transmittance and processing functions. The proposed model enables the description of both deterministic and non-deterministic properties of signal errors. The proposed model was validated using an example measurement chain created for this purpose.

The aim of this study was to evaluate the usefulness of cystoscopic injection of Botulinum-A toxin (BTX) in the detrusor wall in the treatment of children with decreased bladder capacity due to neurogenic bladder. The prospective, randomized non placebo controlled trial is conducted in our institution since year 2006 with the approval of the local Ethics Committee. 556 cystoscopic injections of BTX were performed in 141 children with neurogenic bladder in age 1 to 18 years. In all cases decreased bladder capacity and bladder overactivity with urine incontinence were estimated. The pre-and post-treatment evaluations included determination of urinary continence status, bladder function in frequency/volume chart of catheterized urine and in urodynamic studies. Parameters measured in urodynamic investigations included maximal cystometric capacity, detrusor reflex volume, maximal detrusor pressure. Parameters were analyzed before the cystoscopy and during the follow-up examinations in 5 age groups. Values of all measured parameters improved significantly and equally after therapy in every from 5 age groups. The results obtained from the study confirmed that endoscopic administration of BTX improves function of urinary bladder in children with neurogenic bladder, and the method represents an alternative approach to conservative treatment and surgical augmentation.

Temporary pavilions play an important role as experimental fields for architects, designers and engineers, apart from providing exhibition spaces. Novel structural and formal solutions applied in pavilions also can give them unusual appearance that attracts eyesight of spectators. In this article authors explore the possibility of combination of structural novelty, visual attractiveness and low-cost by a design and construction of a temporary pavilion. For that purpose, an innovative structural system and design approach was applied, i.e. membrane structure designed in Rhino and Grasshopper environments with the use of Kiwi!3D IsoGeometric analysis tool. The designed pavilion, named Obverse/Reverse, was built in Opole, Poland, for the occasion of World Architecture Day in July 2019. Design and construction was performed by the authors in cooperation with students’ organisation Humanisation of Urban Environment from the Faculty of Architecture Wroclaw University of Science and Technology. The Rresultant pavilion proved the possibility of obtaining a low-budgets but visually attractive architectural solution with the adaption of parametrical design tools and some scientific background with innovative structural systems.

The research hypothesis states that the impregnation of the honeycomb paper core of lightweight sandwich panels with modified starch, sodium silicate and LiquidWood® resin has a significant effect on the elastic properties of it. In the study, a recycled paper was used in three thicknesses, seven types of cell shapes, including two after numerical optimization and three types of impregnating agents. The method of digital image analysis determined the elastic constants of manufactured paper cores, which were subjected to axial compression in two directions. Based on the experimental results, elastic constants of the cores were calculated and compared with the results of numerical calculations. It has been shown that each of the impregnating solutions used improves the stiffness of the paper core. The best results were obtained for LiquidWood® epoxy resin and modified starch. An important parameter of cell geometry affecting their rigidity is the angle of the cell wall φ, as well as the arrangement of the common cell wall in relation to the direction of load. The numerical models developed were positively verified.

Background: The most important causative agents of neoplasms in the anogenital area is the human papillomavirus (HPV). Due to the anatomical proximity of the genital and anus area and the ease with which HPV infection is transmitted, it seems that patients after treatment of HPV-related gynecological diseases may have increased risk of developing a second HPV-related neoplasm- anal cancer. The aim of the study was to determine the risk of anal intraepithelial neoplasia (AIN) and anal cancer (AC) among patients after treatment of HPV-related gynecological diseases. Methods: We conducted a comprehensive review of available literature in multiple databases. The study was performed following Cochrane Reviewers' Handbook and Preferred Reporting Items for Systematic Reviews and Meta-Analyses 2009 guidelines. Moreover, we assessed the quality of each study using QUADAS-2. Results: Twenty five studies were included in the final analysis. Patients after treatment of HPV-related gynecological diseases have a significantly higher risk of AC (mean standardized incidence ratio [SIR]= 5.387, mean incidence risk [IR]= 0.096%, mean IR per 100,000 person-years= 10.37), and AIN (mean IR= 23.683%) compared to the population risk. Conclusions: Patients with HPV-related gynecological diseases should constitute a group for which an appropriate primary and secondary screening for AC should be introduced.

With the escalation of size and complexity of modern Denial of Service attacks, there is a need for research in the context of Machine Learning (ML) used in attack execution and defense against such attacks. This paper investigates the potential use of ML in generating behavioral telemetry data using Long-Short Term Memory network and spoofing requests for the analyzed traffic to look legitimate. For this research, a custom testing environment was built, that listens for mouse and keyboard events and analyzes them accordingly. While the economic feasibility of this attack currently limits its immediate threat, advancements in technology could make it more cost-effective for attackers in the future. Therefore, proactive development of countermeasures remains essential to mitigate potential risks and stay ahead of evolving attack methods.

Shape of supracondylar fracture of the humeral of pediatric patients is analysed with Procrustes method. XR–images of fractures are considered both in anterio-posterior (AP) view (66 images) and in a lateral (L) view (24 images). Applying Procrustes method for both views mean images are constructed and compared. Variability of shapes is quantified with a shape principal component analysis. Non-parametric tests (permutational and bootstrap) do not indicate statistical difference between Procrustes mean shapes in anterio-posterior and lateral projections. It is shown, however, that AP and L shapes of humeral fractures differ in their variability quantified by shape principal components.

A new pterygosomatid mite species, Neopterygosoma robertmertensi sp. n. (Acariformes: Pterygosomatidae) was collected from two specimens of Liolaemus robertmertensi (Liolaemidae) from Argentina. This new species is described based on active stages: adults (female and male) and juveniles (deutonymphs, protonymphs, larvae), and quiescent stages (nymphchrysalis, deutochrysalis and imagochrysalis). The changes in morphological characters during the ontogeny of N. robertmertensi have been analyzed in detail. A difference in larval sex morphology was observed for the first time in the family Pterygosomatidae (female larvae differ from male larvae by the shape and size of the idiosoma and position of the genital area). This new mite species is most similar to N. cyanogasteri but can be distinguished by the presence of different leg chaetotaxy patterns of genua IV and femora IV, four to six genital setae, three to five dorsomedial setae and two to three ventromedial setae. Phylogenetic analysis was conducted based on 120 morphological characters of all Neopterygosoma spp. and four outgroup species using the maximum parsimony approach. The results indicated that this species is nested within mites of the chilensis group of Neopterygosoma associated with host species of the section chiliensis of Liolaemus s. str. An updated diagnosis of the chilensis group of Neopterygosoma and an identification key for all species of this genus has been provided.

Obesity is one of the factors leading to the development of atherosclerosis. This metabolic disorder is associated with an increased production of reactive oxygen species, which affect the oxidative stress level. The aim of this study was to evaluate oxidative/antioxidative status and to investigate the correlation between redox markers and anthropometric parameters and body composition in adult patients after myocardial infarction and in individuals without a cardiovascular event in the past. Descriptive data on socio-demographic, clinical, and anthropometric features and blood samples were collected and categorized into two equal groups: after myocardial infarction (study group (SG), n = 80) and without a cardiovascular event (control group (CG), n = 80). The oxidative/antioxidative status was assessed in plasma on the basis of total oxidative/capacitive status (PerOx), total antioxidative status/capacity (ImAnOx), and oxidized low-density lipoprotein (oxLDL). OxLDL was significantly higher in the CG group compared to the SG group (p = 0.02). No significant differences were found with regard to PerOx and ImAnOx values between the studied groups. Significant positive correlation between PerOx and percentage of adipose tissue (FM [%]) and body adiposity index (BAI) was found in the two studied groups. ImAnOx significantly positively correlated with VAI in SG and FM% in CG. OxLDL negatively correlated with body mass index and waist to hip circumference ratio in CG. The total oxidative/antioxidative status is related to the amount of adipose tissue and the BAI of the subjects. It was observed that it correlates more frequently with the visceral distribution of body fat.

Diabetic retinopathy (DR) is a progressive blinding disease that affects vision and quality of life of patients and severely impacts society. This complication, caused by abnormal glucose metabolism, leads to structural, functional, molecular, and biochemical abnormalities in the retina. Oxidative stress (OS) and inflammation also play pivotal roles in the pathogenic process of DR, leading to mitochondrial damage and decrease in the mitochondrial function. DR causes retinal degeneration in glial and neural cells, while the disappearance of pericytes in retinal blood vessels leads to modifications in vascular regulation and stability. Clinical changes include dilatation and blood flow alterations in response to the reduce in retinal perfusion in retinal blood vessels, leading to vascular leakage, neovascularization and neurodegeneration. Thus, DR is a highly complex disease with various biological factors that contribute to its pathogenesis. The interplay between biochemical pathways and non-coding RNAs (ncRNAs) is essential for understanding the development and progression of DR. Abnormal expression of ncRNAs has been confirmed to promote the development of DR, suggesting that ncRNAs such as miRNAs, lnc-RNAs and circ-RNAs have potential as diagnostic biomarkers and theranostic targets in DR. This review provides an overview of interactions between abnormal biochemical pathways and dysregulated expression of ncRNAs under the influence of hyperglycemic environment in DR.

Online food delivery services are rapidly growing in popularity, making customer satisfaction critical for company success in a competitive market. Accurate delivery time predictions are key to ensuring high customer satisfaction. While various methods for travel time estimation exist, effective data analysis and processing are often overlooked. This paper addresses this gap by leveraging spatial data analysis and preprocessing techniques to enhance the data quality used in Bayesian models for predicting food delivery times. We utilized the OSRM API to generate routes that accurately reflect real-world conditions. Next, we visualized these routes using various techniques to identify and examine suspicious results. Our analysis of route distribution identified two groups of outliers, leading us to establish an appropriate boundary for maximum route distance to be used in future Bayesian modelling. The spatial analysis revealed that these outliers were primarily deliveries to the outskirts or beyond the city limits. By refining the data quality through these methods, we aim to improve the accuracy of delivery time predictions, ultimately enhancing customer satisfaction.

The e-commerce sector is in a constant state of growth and evolution, particularly within its subdomain of online food delivery. As such, ensuring customer satisfaction is critical for companies working in this field. One way to achieve this is by providing accurate delivery time estimation. While companies can track couriers via GPS, they often lack real-time data on traffic and road conditions, complicating delivery time predictions. To address this, a range of statistical and machine learning techniques are being employed, including neural networks and specialized expert systems, with different degree of success. One issue with neural networks and machine learning models is their heavy dependence on vast, high quality data. To mitigate this issue we propose two Bayesian generalized linear models to predict time of the delivery. Utilizing a linear combination of predictor variables, we generate practical range of outputs with Hamiltonian Monte Carlo sampling method. These models offer a balance of generality and adaptability, allowing for tuning with expert knowledge. They were compared with PSIS-LOO and WAIC criteria. Results show that both models accurately estimated delivery times from the dataset, while maintaining numerical stability. Model with more predictor variables proved to be more accurate.

Rheumatoid arthritis (RA) is a chronic inflammatory disease. Despite new methods of diagnostics and treatment as well as extensive biological and immunosuppressive treatment, the etiology of RA is not fully understood. Moreover, the problem of diagnosis and treatment of RA patients is still current and affects a large group of patients. It is suggested that these ER-related features may impair adaptation to chronic stress, inferring the risk of rheumatoid arthritis. The main goal in this study was evaluation of changes in mRNA translation to determine chronic ER stress conditions in rheumatoid arthritis patients. The study group consist of 86 individuals including total 56 rheumatoid arthritis patients and 30 healthy controls. The expression level of mRNA form blood samples of RA patients as well as controls of the PERK-UPR associated genes: p-eIF2, BCL-2, PERK, ATF4, BAX were investigated by Real-Time qPCR. GAPDH expression was used as a standard control. Considering the median, the expression of PERK, BCL-2, p-eIF2, ATF4, BAX was found to be significantly increased in the blood of RA patients compared with the control group. The p-value for the PERK gene was 0.0000000036, the p-value for the BCL-2 gene was 0.000000014, the p-value for the p-eIF2 gene was 0.006948, the p-value for the ATF4 gene was 0.0000056 and the p-value for the BAX gene was 0.00019, respectively. Thus, it can be concluded that targeting of the components of the PERK-dependent UPR signaling pathway via small-molecule PERK inhibitors, may contribute to the development of novel, innovative treatment strategies against rheumatoid arthritis.

Epidemiological studies have shown a strong association between high body mass index (BMI) and papillary thyroid cancer (PTC). We assessed the clinical and histopathological features of PTC in patients with a higher BMI and compared them to analogous parameters in PTC patients with a normal BMI. We retrospectively analyzed 5,021 medical records of patients admitted and surgically treated for thyroid tumors in one center between 2008 and 2018. Finally, we extracted data from 523 adult patients with PTC and stratified patients into two groups according to BMI: Group 1 with BMI < 25 kg/m² and Group 2 with BMI ≥25 kg/m². Data stratification was performed to estimate the association of overweight and obesity with clinical and histopathological features of PTC in both univariate and multivariate binary logistic regression analyses. Overall, compared to patients with a normal BMI, overweight and obese patients had a greater risk of minimal extrathyroidal extension (minimal ETE), multifocality and bilaterality of PTC (p<0.001 for all). Analysis did not show that BMI was significantly associated with more advanced tumor-node-metastasis (TNM) stage (p=0.894). Obesity and overweight were significantly associated with higher aggressiveness of PTC. When considering various management options for PTC patients, these findings regarding overweight and obesity should be taken into consideration during the decision-making process.

The Software-Defined Networking concept plays an important role in network management. The central controller, which is the main element of SDN, allows to provide traffic engineering and security solutions in single and multiple-layer networks based on optical transmission. In this work, we compare selected open-source implementations of SDN controllers. Throughput and latency measurements were analyzed using the CBench program. The simulation of a link failure and a controller failure were conducted using the API provided by the Mininet network simulator. For detecting security vulnerabilities, a dedicated program, called sdnpwn, was used. The work provides an overview of the selected controllers, indicating their strengths and weaknesses. Moreover, some implemention suggestions and recommendations are presented.

Conventional MRI sequences are standard methods to monitor patients with brain tumors but have significant limitations especially after irradiation. Currently, the role of FET-PET in radiotherapy of glioblastoma is emerging, starting from target definition, response assessment and in distinguishing progression from post-irradiation changes. Recently a PET RANO criteria have been published providing optimal strategy for treatment evaluation with amino-acid PET. Earlier, a PET/RANO group reported contribution of PET imaging to radiotherapy planning and monitoring in glioma patients. Also, increasing evidence have showed advantages of amino-acid PET vs. RANO MRI for prediction of overall survival. In this narrative review we aimed to summarize published data on FET-PET based treatment response assessment to radiotherapy and focused on details in protocols.

One of the important issues being explored in Industry 4.0 is a collaborative mobile robots. This collaboration requires precise navigation systems, especially indoor navigation systems where GNSS (Global Navigation Satellite System) cannot be used. To enable precise localization of robots, different variations of navigation systems are being developed, mainly based on trilateration and triangulation methods. Triangulation systems are distinguished by the fact that they allow precise determination of an object’s orientation, which is important for mobile robots. An important feature of positioning systems is the frequency of position updates based on measurements. For most systems it is 10-20 Hz. In our work, we propose a high-speed 50 Hz positioning system based on the triangulation method with infrared transmitters and receivers. In addition, our system is completely static, i.e. it has no moving/rotating measurement sensors, which makes it more resistant to disturbances (caused by vibrations, wear and tear of components, etc.). In this paper we describe the principle of the system as well as its design. Finally, we present tests of the built system, which show centimeter positioning accuracy with a position update frequency of 50 Hz.

This article attempts to assess the light pollution of parking lots, using the proprietary measure-ment method with a drone. The main requirements, reflective features of parking lots and typical light curves of luminaires used in lighting this type of areas were presented. Calculations and simulations for various types of luminaires were performed, and then the obtained results were verified in real conditions. The main factors influencing the increase in light pollution were pre-sented and it was proved that it is possible to use the developed measurement method in order to assess the light pollution degree.

Slags and ashes generated in thermal waste treatment facilities require proper management. In line with the principles of the circular economy, new, more economical and ecological possibilities for utilizing these substances are sought. These waste materials exhibit characteristics similar to rocks in many aspects. This study focuses on analyzing the similarities and differences between nine selected rocks and three samples of slags and ashes obtained from municipal waste incineration. The main research device used was a polarizing microscope, using reflected, transmitted and fluorescent light. Additionally, low-pressure gas adsorption equipment, as well as helium and quasi-liquid pycnometers, were used for complementary analysis. The parameters analyzed mainly covered broadly defined petrographic properties of rocks and slags, with a particular emphasis on porosity, porous structure and the spatial distribution of pores and fractures. The conducted analyses confirmed a significant similarity between slags and ashes and clastic sedimentary rocks such as sandstones and mudstones. The research results underscore the importance of petrographic microscopic studies for analyzing materials other than rocks. They also allow for exploring applications for slags and ashes in areas traditionally reserved for natural rock resources. The findings also indicate the necessity of using methods other than microscopic ones to describe the pore space of rocks. The lower measurement range of the optical microscope is limited to approximately 1 μm, covering only macropores. Other methods extend this characteristic to micro- and mesopores. Therefore, a combination of different methods is often employed to obtain a more comprehensive characterization of rock porosity.

Polymer materials are increasingly being used for sliding machine elements due to their numerous advantages. They are used even where they are deformed and in such a state they interact frictionally e.g. in machine hydraulics or lip seals. Few publications deal with the influence of deformation, which is the effect of e.g. assembly on tribological properties of polymeric material. This deformation can reach up to ε ≈ 20% and is achieved without increasing the temperature of the polymer material. The paper presents the results of investigations in which high-density polyethylene (PE-HD) was maintained in deformation by means of a special grip (holder). The wear of the sample was significantly higher than that of the undeformed sample. This effect persisted even after partial relaxation of the stress in the sample after 24 hours. Additional investigations were carried out to explain the obtained results. There were the microscopic observations of the surface after friction, measurements of microhardness and free surface energy. Changes in the value of surface free energy and a significant decrease in microhardness with deformation under tension were observed. Strained material had a different surface appearance after friction and a different size and form of wear products. It was indicated that it is probable that the cohesion of the material will decrease and that the character of the wear process will change as a result of tension. Tension without heating of polymeric material (PE-HD), e.g. as a result of assembly, has been qualified as a hazard to be taken into account when designing and analysing polymeric sliding elements.

The corrugated board is a versatile and durable material that is widely used in the packaging industry. Its unique structure provides strength and cushioning, while its recyclability and bio-degradability make it an environmentally friendly option. The strength of corrugated board depends on many factors, including the type of individual papers on flat and corrugated layers, the geometry of the flute, temperature, humidity, etc. This paper presents a new approach to analysis geometric features of corrugated boards based on the images. It allows for precise determination of the geometry of the corrugated layer, as well as the thickness of individual papers in all cardboard layers. The experimental set used in the work and the created software are characterized by high reliability and precision of measurement thanks to the use of an identification procedure based on image analysis and evolutionary algorithms. This allows to quickly find the main geometric characteristics of the corrugated board, which in turn leads to the possibility of performing numerical analyzes taking into account the real model of the corrugated board. Calculations made on a real (correctly mapped geometrically) model allow, for example, a more reliable analysis of the composition of the cardboard, and thus also to obtain greater savings in the optimization process.

Plastics have recently become an indispensable part of everyone's daily life due to their versatility, durability, light weight and low production costs. The increasing production and use of plastics poses a great danger due to the very long period of degradation, but also the negative impact on living organisms. Decomposing plastics lead to the formation of microplastics, which accumulate in the environment and living organisms becoming part of the food chain. Polyvinyl chloride (PVC) contamination of soil and water seriously threatens ecosystems around the world. The durability and low weight make microplastic particles easily transported with water or air and end up in the soil. Thus, the problem of microplastic pollution affects the entire ecosystem. Since microplastics are commonly found in both drinking and bottled water, humans are also exposed to the harmful effects of microplastics. Because of the existing risks associated with PVC microplastic contamination of the ecosystem, intensive research is underway to develop methods to clean and eliminate it from the environment. Pollution of the environment with plastic, especially microplastic, results in the reduction of both water and soil resources used for agricultural and utility purposes. This review provides an overview of PVC's environmental impact and disposal options.

A rapid and appropriate genetic and metabolic acclimation, which is crucial for plants’ survival in a changing environment, is maintained due to the coordinated action of plant hormones and cellular degradation mechanisms influencing proteostasis. The plant hormone abscisic acid (ABA) rapidly accumulates in plants in response to environmental stress and plays a pivotal role in the reaction to various stimuli. Increasing evidence demonstrates a significant role of autophagy in controlling ABA signaling. This field has been extensively investigated and new discoveries are constantly being provided. We present updated information on the components of the ABA signaling pathway, particularly on transcription factors modified by different E3 ligases. Then, we focus on the role of selective autophagy in ABA pathway control and review novel evidence on the involvement of autophagy in different parts of the ABA signaling pathway that are important for crosstalk with other hormones, particularly cytokinins and brassinosteroids.

We consider a classial case of irrational integrals containing a square root of a quadratic polynomial. It is well known that they can be expressed in terms of elementary functions by one of three Euler’s substitutions. It is less known that the Euler substittutions have a beautiful geometric interpretation. In the framework of this interpretation one can see that the number 3 is not the most suitable. We show that it is natural to introduce the fourth Euler substitution. By the way, it is not clear who was the first to attribute these three substitutions to Euler. In his original treatise Leonhard Euler uses two substitutions which are sufficient to cover all cases.

Dietary supplements are more and more often used to increase daily intake of essential vitamins and minerals. These preparations are classified as special category of foods and are subject to food law, not pharmaceutical regulations. As a result the requirements to dietary supplements are much less restrictive than to medications. Also simple and inexpensive procedure of registration causes that the number of dietary supplements is widely spread every year. On every manufacturing phases of dietary supplements, there is a risk of contamination. One of the pollutions might be mercury which is classified as heavy metal. Its inorganic compounds damage kidneys and liver and methylmercury is easily absorbed from gastrointestinal system. Methylmercury is distributed in all tissues, also in nervous system. The aim of study was to determine the level of mercury in multivitamins and multiminerals preparations and to analyze the results. The study included 22 dietary supplements containing vitamins and minerals available on Polish market. Mercury was analyzed with atomic absorption spectrometry using AMA 254. The concentrations of Hg was 0.22–5.85 µg/kg (the average content was 2.40 µg/kg). The highest average mercury content was 4.51 µg/kg, whereas the lowest one was 0.31 µg/kg. The results was also analyzed in individual groups depending on main component and indication for use as well as pharmaceutical formulation. Also according to manufacturer’s recommendation, the dose of mercury taken with a single medicine was estimated for time of a day, a week, a month, 3 months and also a year. The findings were compared to limits defined in regulations of European Union and PTWI set by JECFA to assess the health risk. The results presented in this study proved that the amount of mercury in tested dietary supplements is much lower than the value of valid regulations. Analyzed supplements as long as they are used with the recommendation of manufacturer, do not pose a threat to human health.

The article presents the case of a 27-year-old female patient with idiopathic congenital complete heart block who was referred by her primary care physician for cardiological evaluation. The conduction disturbance was recognized at the age of 6 years and was asymptomatic. The disqualification from pacemaker implantation included detailed history of a patient’s symptoms, echocardiographic assessment of the heart, exercise testing and ECG Holter monitoring. The aid of salbutamol administered orally was also useful.

Generative adversarial networks (GAN) opened new possibilities for image processing and analysis. Inpainting, dataset augmentation using artificial samples or increasing spatial resolution of aerial imagery are only a few notable examples of utilizing GANs in remote sensing. This is due to a unique construction and training process expressed as a duel between GAN components. The main objective of the research is to apply GAN to generate an artificial Normalized Difference Vegetation Index (NDVI) using panchromatic images. The NDVI ground-truth labels were prepared by combining RGB and NIR orthophoto. The dataset was then utilized as input for a conditional generative adversarial network (cGAN) to perform an image-to-image translation. The main goal of the neural network was to generate an artificial NDVI image for each processed 256px × 256px patch using only information available in the panchromatic input. The network achieved 0.7569 ± 0.1083 Structural Similarity Index Measure (SSIM), 26.6459 ± 3.6577 Peak Signal-to-Noise Ratio (PNSR) and 0.0504 ± 0.0193 Root-Mean-Square Error (RSME) on the test set. The perceptual evaluation was performed to verify the usability of the method when working with a real-life scenario. The research confirms that the structure and texture of the panchromatic aerial remote sensing image contains sufficient information for NDVI estimation for various objects of urban space. Even though these results can be used to highlight areas rich in vegetation and distinguish them from urban background, there is still room for improvement in terms of accuracy of estimated values. The purpose of the research is to explore the possibility of utilizing GAN to enhance panchromatic images (PAN) with information related to vegetation. This opens interesting possibilities in terms of historical remote sensing imagery processing and analysis. The panchromatic orthoimagery dataset was derived from RGB orthoimagery.

Corrugated board, widely used in the packing industry, is a recyclable and durable material. Its strength and cushioning, influenced by geometry, environmental conditions like humidity and temperature, and paper quality, make it versatile. Double-walled (or five-ply) corrugated board, comprising two flutes and three liners, enhances these properties. This study introduces a novel approach to analyze 5-layered corrugated board, extending a previously published algorithm for single-walled boards. Our method focuses on measuring layer and overall board thickness, flute height, and center lines of each layer. Integrating image processing and genetic algorithms, the research successfully developed an algorithm for precise geometric feature identification of double-walled boards. Images were recorded using a special device with a sophisticated camera and image sensor for detailed corrugated board cross-sections. Demonstrating high accuracy, the method faced limitations only with very deformed or damaged samples. This research contributes significantly to quality control in the packaging industry and paves the way for further automated material analysis using advanced machine learning and image sensors. It emphasizes the importance of sample quality and suggests areas for algorithm refinement to enhance robustness and accuracy.

The study reports the effect of some metal carbides (niobium carbide, vanadium carbide, titanium carbide, and manganese sulfide) on hydrogen embrittlement in the pipeline industry using plane wave’s density functional theory (DFT). Our results predicted that the interaction of hydrogen molecules with these metals carbide occurs in the long range with binding energy varying in the energy window [0.70eV to 0.043eV]. Also, our study shows the desorption of H2 molecules from these metal carbides in the chemisorptions. Since, hydrogen embrittlement, occurs in the atomic state of hydrogen, therefore our finding in the atomic interaction of hydrogen with NbC, VC, TiC, and MnS showed that the strength of the trapping of the hydrogen atom could be classified as: TiC+H>VC+H>NbC+H> MnS+H. In addition, our study reveals that the carbon site is the most favorable hydrogen trapping site than the metal one. Furthermore, our results demonstrate that increasing the layer can also be an efficient way to enhance the trapping capacity.

The article addresses the issue of reducing the carbon footprint in the formula of the European Union’s New Green Deal using nuclear energy introduced in place of coal. It contains an analysis of the possibilities offered by currently developed concepts of using nuclear energy in the context of existing energy infrastructure in Poland. It indicates the compatibility of coal and nuclear technologies for generating electricity and heat, considering only those with the highest level of technological readiness. The aim of the article is to identify the energy transformation in Poland using nuclear technologies and acquiring, creating and developing knowledge on the subject. It is assumed that the future of coal-nuclear transformation depends on determining where investment processes could take place in Poland, demonstrating the power that can be replaced through transformation, and indicating appropriate coal CPP (Carbon Power Plant) and nuclear NPP (Nuclear Power Plant) technologies with which a roadmap for the development of Polish nuclear energy can be created. The direction of potential actions is shown, whose coordination and implementation requires cooperation between many entities with appropriate knowledge and experience. For the purposes of this article, preliminary research was conducted on the possibilities offered by currently developed concepts in the context of existing energy infrastructure in Poland, its transformation, and the necessary social capital and its sources. The considerations did not take into account power plants and combined heat and power plants that have been liquidated or the use of their remaining infrastructure.

Recent studies have revealed that several cancer cell types can upregulate inducible nitric oxide synthase (iNOS) and iNOS-derived nitric oxide (NO) after a moderate photodynamic challenge sensitized by 5-aminolevulinic acid (ALA)-induced protoporphyrin-IX. The NO signaled for cell resistance to photokilling as well as greater growth and migration/invasion aggressiveness of surviving cells. On this basis, it was predicted that diffusible NO from PDT-targeted cells in a tumor might enhance growth, migration, and invasiveness of non- or poorly PDT-targeted bystander cells. This was tested using a novel approach in which ALA-PDT targeted cancer cells on a culture dish were initially segregated from non-targeted bystander cells of the same type via impermeable silicone-rimmed rings. Several hours after LED irradiation, the rings were removed, and both cell populations analyzed in the dark for various responses. After a moderate extent of targeted cell killing (~25%), bystander proliferation and migration were evaluated, and both were found to be significantly enhanced. Enhancement corelated with iNOS/NO upregulation in surviving PDT-targeted cancer cells in the following cell type order: PC3 > MDA-MB-231 >U87 > BLM. If occurring in an actual PDT-challenged tumor, such bystander effects might compromise treatment efficacy by stimulating tumor growth and/or metastatic dissemination. Possible mitigation of these negative effects by using pharmacologic inhibitors of iNOS expression or activity as PDT adjuvants will be discussed.

The cutting of difficult-to-machine materials, including their preconditioning, often requires specialised tools and machinery. An alternative processing technology can be cutting materials with a water jet. From the initial stage, the selection of appropriate technological parameters will influence what further finishing treatments will be applied. Vibrations occurring during this process can negatively affect the quality of the cutting edges and surfaces. Therefore, this study analysed vibrations during water-jet cutting with variable technological parameters (speed vfi and pressure pi). To measure the vibrations, a three-axis accelerometer from SEQUOIA was used in water-jet cutting of three materials: aluminum alloy, titanium alloy, and steel. Based on the study, it was found that the maximum value of vibration amplitude reaches the lowest value of vibration acceleration for aluminum alloy (not exceeding 5 m/s2), regardless of the value of pressure during the cutting process. This, taking into account the material properties, indicates that aluminum alloy is the material most susceptible to the cutting process while maintaining a high quality of the cutting surface. Significantly higher values of vibration acceleration amplitude (reaching up to 60 m/s2) during cutting were registered for steel and titanium alloy in all zones and phases of the process (entry zone, cutting zone, and exit zones).

To assess cognitive impairment and affective symptoms and their association with damage to normal-appearing white matter (NAWM) in patients with clinically isolated syndrome (CIS), we compared neuropsychological test scores between patients with CIS and healthy controls, and examined correlations between these and proton magnetic resonance spectroscopy (1H-MRS) outcomes in patients with CIS. Forty patients with CIS and 40 healthy participants were tested with the set of neuropsychological tests, the Beck Depression Inventory (BDI) and the Hospital Anxiety and Depression Scale (HADS). Single-voxel 1H-MRS was performed on frontal and parietal NAWM of patients with CIS to assess ratios of N-acetyl-aspartate (NAA) to creatine (Cr), myo-inositol (mI), and choline (Cho), as well as mI/Cr and Cho/Cr ratios. Patients with CIS had lower cognitive performance, higher scores for the BDI and anxiety subscale of HADS than healthy controls. There were significant correlations between the following neuropsychological tests and metabolic ratios in the frontal NAWM: Stroop Color-Word Test and Cho/Cr, Symbol Digit Modalities Test and mI/Cr as well as NAA/mI, Go/no-go reaction time and NAA/Cho as well as NAA/mI, Californian Verbal Learning Test and NAA/Cr. BDI scores were related to frontal NAA/mI and parietal NAA/Cr and Cho/Cr ratios, whereas HADS-depression scores were associated with frontal NAA/Cr and NAA/mI, and parietal NAA/Cr and Cho/Cr ratios. HADS-anxiety correlated with parietal NAA/Cr ratio. This study suggests that neurochemical changes in the NAWM assessed with single-voxel 1H-MRS are associated with cognitive performance and affective symptoms in patients with CIS.

Worldwide, there is a significant increase in the use of unmanned aerial vehicles (UAVs) by emergency services. They offer a lot of possibilities during the rescue operation. Such a wide application for various purposes and environments causes many threats related to their use. To minimize the risks associated with conducting air operations with UAVs, the SORA methodology will be important. Due to its level of detail, it is a methodology adapted to civilian use. In this article, the authors' team will try to develop guidelines and directions for adapting SORA to the requirements of the operational work of emergency services. Thus following article aims to present the most important risks related to conducting operations with the use of UAVs by First Responders (FRs) and to show the sample risk analysis performed for this type of operation on the example of the ASSISTANCE project. The paper describes, on the one hand, possibilities offered by UAVs in crisis or disaster management and step-by-step Specific Operations Risk Assessment (SORA) and on the other hand, presents possible threats, consequences and methods of their mitigation during FRs missions.

The dynamic development of electromobility poses challenges to designers regarding not only the efficiency of energy transformation but also the battery life, which is influenced by the stability of its operating temperature. Designing cooling systems is connected not only with the optimization of energy management but also with other environmental parameters, such as noise emission. The paper presents the numerical optimization of an innovative radiator for use in electric buses in terms of energy consumption and noise emission. The results of the numerical studies were verified in laboratory and field conditions, showing a very good convergence of the model with the results of the experiments.

The paper describes an application of machine learning approach for parameter optimization. The method is demonstrated for the elasto-viscoplastic model with both isotropic and kinematic hardening. It is shown that the proposed method based on long-short term memory networks enabled to obtain reasonable agreement of stress-strain curves for cyclic deformation in low-cycle fatigue regime. The main advantage of the proposed approach over traditional optimization schemes lies in the possibility to get parameters for a new material without the necessity to conduct any further optimizations. As the power and robustness of the developed method was demonstrated on the very challenging problem (cyclic deformation, crystal plasticity, self-consistent model, isotropic and kinematic hardening), it is directly applicable to other experiments and models.

We introduce NodeFlow, a flexible framework for probabilistic regression on tabular data that combines Neural Oblivious Decision Ensemble (NODE) and Conditional Continuous Normalizing Flows (CNF). It offers improved modeling capabilities for arbitrary probabilistic distributions, addressing the limitations of traditional parametric approaches. In NodeFlow, the NODE captures complex relationships in tabular data through a tree-like structure, while the conditional CNF utilizes the NODE’s output space as a conditioning factor. The training process of NodeFlow employs standard gradient-based learning, facilitating end-to-end optimization of the NODEs and CNF-based density estimation. This approach ensures outstanding performance, ease of implementation, and scalability, making NodeFlow an appealing choice for practitioners and researchers. Comprehensive assessments on benchmark datasets underscore NodeFlow’s efficacy, revealing its achievement of state-of-the-art outcomes in multivariate probabilistic regression setup and its strong performance in univariate regression tasks. Furthermore, ablation studies are conducted to justify the design choices of NodeFlow. In conclusion, NodeFlow’s end-to-end training process and strong performance make it a compelling solution for practitioners and researchers. Additionally, it opens new avenues for research and application in the field of probabilistic regression on tabular data.

Photocatalytic decomposition of ethylene was performed under UV-Led irradiation at the presence of nanocrystalline TiO2 (anatase, 15 nm) supported on the porous nickel foam. Process was carried out in the high temperature chamber with regulated temperature from ambient to 125°C under flow of reacted gas (ethylene in a synthetic air, 50 ppm) with simultaneous FTIR measurements of sample surface. Ethylene was decomposed with higher efficiency in elevated temperatures with maximum of 28% at 100-125°C. The nickel foam used as support for TiO2 allowed to enhance the ethylene decomposition at the temperature of 50°C. However, at 50°C the stability of ethylene decomposition was not retained within the following reaction run, but it was at 100°C. Performed photocatalytic measurements at the presence of some radicals scavengers indicated that higher efficiency of ethylene decomposition was obtained due to the improved separation of charge carriers and increased formation of superoxide anionic radicals, which were formed at the interface of thermally activated nickel foam and TiO2.

Lubricated tribosystems such as main-shaft bearings in gas turbines have been successfully diagnosed by oil sampling for many years. In practice, the interpretation of wear debris analysis results can pose a challenge due to the intricate structure of power transmission systems and the varying degrees of sensitivity among test methods. In this work, oil samples acquired from the fleet of M601T turboprop engines were tested with optical emission spectrometry. Two-way analysis of variance (ANOVA) with interaction analysis and post hoc tests were carried out on measurement data from the whole fleet of the M-601T turboprop engines to study the impact of aluminum and zinc concentration on iron concentration. Finally, the developed model was used to evaluate the oil testing results for two specific engines of this type. Thanks to ANOVA, the assessment of engine health is based on a statistically proven correlation between the values of the dependent variable and the classifying factors.

The article is devoted to the preliminary concept of the Future Planetary Defense System (FPDS), emphasizing Astroballistics. This paper is intended to support international efforts to improve the planetary security of the Earth. The work covers three areas of knowledge: Astronautics, Astrodynamics, and Astroballistics. The most important part of the presented article is dynamic, contact combat modeling against small, deformable celestial bodies. For these purposes, the original, proprietary hydrocode of the Free Particle Method (HEFPM-G) with gravity was used. The main aim of combat is to redirect the Potentially Hazardous Objects (PHOs) to orbits safe for the Earth or destroy them. This concept's first task is to find, prepare and use dynamic three-dimensional models of celestial bodies' motion and spacecraft or human-crewed spaceships in the Solar System's relativistic frame. The second task is to prepare the FPDS' architecture and computer simulation space missions' initial concepts in the internal part of the solar system. The third and main task covers simulating, using hydrocodes, selected methods of fighting 100 m and 140 m diameter asteroids. The order of the article is as follows. The first part of the article presents an architecture and FPDS' modus operandi. Preliminary design and development of FPDS' space missions, including navigation, mission dynamics simulation, is prepared using an open-source space mission analysis and design tool. E.g., Asterank and Trajectory Browser or GMAT are presented in the second part. The third part of the article is devoted to computer hydrocodes (HEFPM-G) and the modeling and simulation of asteroid–asteroid collision, laser radiation effects on an asteroid, and FPDS spacecraft's warhead contact interaction on the small celestial body. The authors formulated the Main Planetary Defense Problem (MPDP) in this paper. The proposition of this problem solving has been realized by preparing its concepts, architecture, and modus operandi of the FPDS mission. Finally, a series of realistic simulations were made using hydrocode to deflect or destroy dangerous asteroids. The summary and conclusions can be found in the fourth part of the article.

Some biostimulants, including plant origin preparations, act similarly to plant hormones. Moreover, the supplementation of known and unknown rooting cofactors can stimulate rhizogenesis in cuttings. The aim of this research was to assess the response of difficult-to-root and long-rooting stem cuttings of the once-blooming old variety Rosa ‘Hurdal’ to preparations of plant origin. The hypothesis was that plant origin preparations could enhance rooting processes by inhibiting chlorophyll a/b degradation in leaves and postponing leaf senescence, simultaneously increasing the quality of cuttings. The one-bud stem cuttings were made in four phenological stages: (H1) flower buds closed, (H2) open flowers, (H3) just after petal fall, (H4) 7-14 days after petal shedding. They were treated with either standard commercial powder preparations containing 0.4% indolebutyric acid (IBA) or 0.2% naphthalene acetic acid (NAA) as well as with commercial plant origin preparations that this work will henceforth refer to as: Algae Extract, Organic Preparation, and Plant Extract. The cuttings were evaluated after 12 weeks of rooting them in two substrates: peat-perlite and peat-sand (v:v; 1:1). Mean root percentages for both substrates were noted after preparation from stage H1 (74.5 %), H2 (59.5 %), H3 (50.8 %) shoots. The H4 cuttings didn’t root at all and were not considered further. The means for all phenology stages together were the highest by the use of 0.6 % Algae Extract, 0.012 % and 0.02 % Organic Preparation, 0.2 % and 0.4 % Plant Extract. The lowest means were reported for the control cuttings as well as NAA and IBA treatment. Plant origin preparations encouraged growth parameters but did not unequivocally inhibit the decrease of chlorophyll content in the cuttings’ leaves. Rooting percentage depended on the quality of cuttings as well as chlorophyll a/b and soluble protein content in leaves in both rooting substrates.

Staphylococcus aureus bacteria are one of the leading microorganisms responsible for nosocomial infections as well as being the primary causative pathogen of skin and wound infections. Currently, the therapy of staphylococcal diseases faces many difficulties, due to a variety of mechanisms of resistance and virulence factors. Moreover, a number of infections caused by S. aureus is connected with biofilm formation that impairs effectiveness of the therapy. Short cationic lipopeptides that are designed on the basis of the structure of antimicrobial peptides structure are likely to provide a promising alternative to conventional antibiotics. Despite the fact that many research groups have proved a high antistaphylococcal potential of lipopeptides, the lack of unified protocols in determination of antimicrobial activity may be the reason of inconsistency of the results. The aim of this study was to learn how the use of various bacteriological media as well as solvents may affect activity of lipopeptides and their cyclic analogs.

The effect of Amaranthus cruentus L. seed oil (AmO) on collagen biosynthesis and wound healing was studied in cultured human dermal fibroblasts exposed to UVA radiation. It has been found that UVA radiation inhibited collagen biosynthesis, prolidase activity, expression of β1-integrin receptor, phosphorylated ERK1/2 and TGF-β, while increased the expression of p38 kinase. The AmO at 0.05-0.15% counteracted the above effects induced by UVA radiation in fibroblasts. UVA radiation also induced the expression and nuclear translocation of pro-inflammatory NF-κB fac-tor and enhanced the COX-2 expression. AmO effectively suppressed the expression of these pro-inflammatory factors induced by UVA radiation. Expressions of β1 integrin and IGF-I re-ceptors were decreased in the fibroblasts exposed to UVA radiation, while AmO counteracted the effects. Furthermore, AmO stimulated fibroblast’s migration in a wound healing model, thus facilitating the repair process following exposure of fibroblasts to UVA radiation. This data suggest the potential of AmO to counteract UVA-induced skin damage.

The link between scoliotic deformity and bone metabolism in adolescent idiopathic scoliosis (AIS) has not been well researched. Moreover, the data concerning the cross-talk between fat tissue content/hormonal activity and bone markers in this group of patients are lacking. The objective of this study was to correlate the extent of scoliotic-curve severity with the bone turnover vs. leptin level and nutritional status in girls with AIS. The study encompassed 77 AIS girls, aged 14.7 ± 2.17 years. Scoliotic curve severity assessed by Cobb’s angle was categorized as mild (10-19o) moderate (20-39º) or severe (≥40º). Corrected height, weight, waist and hip circumferences were measured and body mass index (BMI), corrected height Z-score, BMI Z-score and waist/height ratio (WHtR) were calculated for the entire group. Body composition parameters: fat mass (FAT), fat-free mass (FFM) and predicted muscle mass (PMM) were determined using a bioelectrical impedance analyzer. Bone turnover markers (osteocalcin (OC) and amino terminal of collagen cross-links NTx) and leptin levels were assessed in serum. Multiple regression analysis showed that, OC, NTx (negatively with p<0.05) and leptin (positively with p<0.01) were significantly associated with curve severity in AIS girls. Moreover, Cobb’s angle was positively correlated with W/HtR (p<0.01)and FAT (p<0.05). One-way analysis of variance (ANOVA) revealed significant differences in leptin (p<0.05 vs. mild only), OC (p<0.05 vs. mild and moderate)) and W/HtR (p<0.01 and p<0.05 vs. mild and moderate respectively) between the three AIS severity subgroups. OC was significantly lower in the severe AIS subgroup, while leptin and W/HtR were significantly higher. Significant correlations between leptin and anthropometrical parameters as BMI z-score and W/HtR were shown. Leptin level correlated also significantly with BMI z score (p<0.001), W/HtR (p<0.0001) and body composition parameters (p<0.000001). Moreover, there was a significant negative correlation between NTx and leptin level (p<0.05). Bone metabolism in AIS girls seems to be altered and significantly related to the scoliotic curve severity. Leptin may be a crucial link in the cross-talk between bone turnover and body composition in this group of patients. Further studies concerning this topic are needed.

Mitochondrial dysfunction has been linked to psoriasis, and may be an important underlying factor contributing to this disease. However, a precise methodology for assessing mitochondrial dysfunction has yet to be developed. One promising approach is to measure NADH autofluorescence from affected skin areas. In this study, we show that Flow Mediated Skin Fluorescence (FMSF) can be used for non-invasive assessment of mitochondrial dysfunction in psoriasis. The fluorescence level at baseline and the half-time of ischemic growth (t1/2) derived from the FMSF traces can be used for non-invasive assessment of NADH/NAD+ redox imbalance in psoriatic lesions compared to unaffected skin. These results are supported by analysis of the key FMSF parameters, Reactive Hyperemia Response (RHR) and Hypoxia Sensitivity (HS). This method not only contributes to understanding of the biochemical processes involved in the etiopathogenesis of psoriasis, but also provides a basis for identifying new drug targets and improving the treatment process.

UVA radiation inducing oxidative stress is harmful for the skin cells. The most sensitive are dermal fibroblasts. Exposure of the cells to prolonged UVA radiation induces apoptosis. Although, skin cells have a number of defense mechanisms that protect them against UV-induced oxidative stress, they are insufficient during long-lasting UV exposure. Therefore, there is a need for effective skin protection compounds with cytoprotective and antioxidant properties. One of their sources is Amaranthus cruentus L. seed oil, rich in unsaturated fatty acids, squalene, vitamin E derivatives, and phytosterols. The aim of this study was to evaluate whether Amaranthus cruentus seed oil evokes protective effect on the apoptosis stimulated by UVA radiation in human skin fibroblasts. UVA radiation at an applied dose of 10 J/cm2 caused a significant reduction in the survival of human skin fibroblasts and directed them into apoptosis pathway. Increased expression of p53, caspase 3, and caspase 9 and PARP proteins in UVA-treated fibroblasts suggests the intrinsic mechanism of apoptosis. The application of Amaranthus cruentus seed oil at 0.1% and 0.15% concentrations to UVA-treated cells decreased the expression of these proteins, which was accompanied by increased cell survival. Similarly, the UVA-dependent decrease in expression of p-Akt and mTOR proteins was restored, under the effect of studied oil. The molecular mechanism of this phenomenon is related to the stimulation of antioxidant processes through activation of Nrf2. This suggests that Amaranthus cruentus seed oil stimulate the antioxidant system in fibroblast cells and prevent the effects of UVA-induced oxidative stress and may find application in pharmacy and cosmetology as a sun- protective substance.

Magnetic sensors are widely used in health management systems for turbomachinery, but their applications in the hot zone are limited due to the loss of magnetic properties by permanent magnets with increasing temperature. The paper presents and verifies models and design solutions aimed at improving the performance of an inductive sensor for measuring the motion of rotating objects operating at elevated temperatures (200-1000C), such as compressor and turbine blades. Physical, analog and mathematical models of the interaction of blades with the sensor were developed. A prototype of the sensor was made and its tests were carried out on the RK-4 rotor rig for the speed of 7000 rpm, in which the temperature of the sensor head was gradually increased to 1100C. The sensor signal level was compared to that of an identical sensor operating at room temperature. The heated sensor works continuously producing the output signal whose level does not change significantly. What is more, a set of six probes passed an initial engine test in an SO-3 turbojet. It was confirmed that the proposed design of the inductive sensor is suitable for blade health monitoring of the last stages of compressors, steam turbines as well as previous generation gas turbines operating below 1000C, even without a dedicated cooling system. In real-engine applications, sensor performance will depend on how the sensor is installed and the available heat dissipation capability

Blade Health Monitoring (BHM) is often necessary in power plants and in aviation to prevent excessive blade vibration and cracks. This article proposes a network of blade tip timing sensors operated in a distributed BHM system. A number of cooperating agents is implemented in smart conditioning units which can autonomously operate in an adverse environment and communicate with other nodes via a serial interface. The project uses special versions of reduced instruction set chips that are able to operate near the hot section of the engine. Due to the limited number of types of microprocessors available in the extended temperature range grading, it was necessary to fully utilize the limited hardware resources and implement preemptive multitasking. For this purpose, a custom operating system and communication protocol were designed. The protocol hosts the middle layer which hides the implementation of the distributed system. The presented architecture ensures the sufficient computational capacity in individual nodes of the network operated in adverse conditions. It is scalable and resistant to transmission errors.

Radio techniques are widely used in wildlife tracking. Currently, the most common tracking methods include radio tracking (operating on VHF and UHF frequencies), satellite tracking (e.g., Argos satellite Doppler-based positioning system), and Global Navigation Satellite System (GNSS) tracking. One of the radio tracking systems is the Radio-Frequency Identification (RFID) system, characterized by small dimensions and a long operational period due to energy-efficient features. The advantages of RFID make it possible to apply this technique to track oak acorns in the process of zoochoric dispersal. In our study, we explored the potential applications of RFID systems for monitoring the dispersal of oak acorns. We developed a tracking system based on a semi-passive RFID tag, which we tested under laboratory and quasi-realistic conditions. The obtained results confirm the feasibility of using our system in radio tracking small objects such as oak acorns.

Alternative fuels containing biocomponents produced in various technologies are introduced in aviation to reduce its carbon footprint but there is little data describing their impact on the performance and emissions of engines. The purpose of the work is to compare the performance and gas emissions produced from two different jet engines: the GTM-140 microturbine and the full-size DGEN380 turbofan, powered by blends of Jet A-1 and one of two biocomponents: 1) ATJ and 2) HEFA produced from used cooking oil (UCO) in various concentrations. The acquired data will be used to develop an engine emissivity model to predict gas emissions. Blends of the mineral fuel with synthetic components were prepared in various concentrations, and their physicochemical parameters were examined in the laboratory. Measurements of emissions from both engines were carried out in selected operating points using the Semtech DS gaseous analyzer and the EEPS spectrometer. The impact of tested blends on engine operating parameters is limited, and their use does not carry the risk of a significant decrease in aircraft performance or increase in fuel consumption. Increasing the content of biocomponents causes a noticeable rise in the emission of CO and slight increase for some other gasses (HC and NOx), which should not, however, worsen the working conditions of the ground personnel. This implies that there are no contraindications against using tested blends for fuelling gas-turbine engines.

Supplementation with 200% of the recommended daily dietary quantity of copper modified vascular contraction and relaxation through increased reactive oxygen species (ROS) and prostaglandin formation, which modified the antioxidant status of middle–aged rats. In this study, young (1 month old) male Wistar rats (n/group = 10) received a diet supplemented with 6.45 mg copper/kg (100%—Group A) for 8 weeks. The experimental group received 12.9 mg copper/kg of diet (200%—Group B). Experimental supplementation with 200% copper increased the copper concentration in the blood, liver, and kidneys; increased the ROS concentration in the aortic rings; and enhanced the sensitivity of the aortic rings to acetylcholine. We observed increased participation of nitric oxide (NO) derived from inducible NO synthase (iNOS) in vascular contraction and a decreased net effect of vasodilator prostanoids derived from cyclooxygenase–2 (COX–2) in vascular relaxation. Supplementation with 200% copper was less significant than expected after previous studies conducted with middle–aged rats.

This study explores the Edaravone solubility space encompassing both neat and binary dissolution media. The efforts were made toward revealing the concentration limits inherently associated with common pure and mixed solvents. For this purpose, the published solubility data of the title drug were scrupulously inspected and cured. This enabled to make the dataset consistent and coherent. However, the lack of some important types of solvents in the collection called for an extension of the available pool of Edaravone solubility data. Hence, new measurements were performed for collecting Edaravone solubility in polar non-protic and polar di-protic media. Such an extended set of data was used for tuning the parameters of regressors models and formulating the ensemble for predicting new data. In both phases, namely the model training and ensemble formulation, close attention was paid not only to minimizing the deviation of computed values from the experimental ones but also to ensuring the high predictive power and computing solubility for new systems. Furthermore, the environmental friendliness characteristics determined based on the common green solvent selection criteria was included in the analysis. Our applied protocol led to the conclusion that the solubility space defined by ordinary solvents is limited, and it is unlikely to find solvents that are more suited for Edaravone dissolution than those depicted in this manuscript. The theoretical framework presented in this study provides a precise guide for conducting experiments, saving time and resources in the pursuit of new findings.

Many stable water dispersions of various chemical compositions containing bioactive chemical compounds: copper silicate, titanium dioxide and zinc oxide (and other auxiliary substances) were developed and fabricated - they were used for preparation of thin hybrid coatings having very good antimicrobial properties against gram negative bacteria (Escherichia coli), gram positive bacteria (Staphylococcus aureus) and yeast fungus (Candida albicans). Polyester (PES) nonwovens were modified by dip-coating, and PES and cotton fabrics - by dip-coating and coating methods.

Prosthetic infections are associated with high morbidity, mortality, and relapse rates making them still a serious problem for implantology. Staphylococcus aureus is one of the most common bacterial pathogens causing prosthetic infections. In response to the increasing rate of bacterial resistance to commonly used antibiotics, the work proposed a method of combating pathogenic microorganisms by modifying the surface of synthetic polymeric biomaterials using proteolytic enzyme inhibitors (serine protease inhibitors - 4-(2-aminoethyl)benzenesulfonyl fluoride hydrochloride and puromycin). While using techniques based on immobilization of biologically active molecules, it is important to monitor changes occurring on the surface of the modified biomaterial, where spectroscopic techniques (e.g. FTIR) are ideal. The ATR-FTIR measurements demonstrated that the immobilization of both inhibitors caused large structural changes on the surface of the tested vascular prostheses (polyester or polytetrafluoroethylene) and showed that they were covalently bonded to the surface of the biomaterials. Next, the bactericidal and antibiofilm activities of the tested serine protease inhibitors were determined using the CLSM microscopic technique with fluorescent staining. During LIVE/DEAD analyses, a significant decrease in the formation of Staphylococcus aureus biofilm after exposure to selected concentrations of native inhibitors (0.02-0.06 mg/mL for puromycin and 0.2-1 mg/mL for 4-(2-aminoethyl)benzenesulfonyl fluoride hydrochloride was demonstrated.

The relationship between physics and information processing is a topic of great significance in the realm of science and technology. The laws of physics, which govern the behavior of matter and energy, also have a profound influence on the way information is processed and utilized. While the mathematics governing information processing has not extensively utilized the laws of physics, it is evident that there is potential for these laws to play a more significant role, particularly in the context of quantum systems. based on the equivalence between information and energy, we can explore how other laws of physics can effectively contribute to more efficient and advanced information processing techniques. This research sheds light on the interconnectedness of physics and information processing, and its findings have the potential to significantly enhance our ability to process information, particularly in cutting-edge quantum systems. By recognizing and leveraging the influence of physics, we can pave the way for further advancements in information processing technologies.

The paper presents a conceptual model of the route of macroplastic debris (5 > mm) through a fluvial system, which can support future works on the overlooked processes of macroplastic storage and remobilization in rivers. We divided the macroplastic route into (1) input, (2) transport, (3) storage, (4) remobilization and (5) output phases. Phase 1 is mainly controlled by humans, phases 2–4 by fluvial processes, and phase 5 by both types of controls. We hypothesize that natural characteristics of fluvial systems and their modification by dam reservoirs and flood embankments construction are key controls on macroplastic storage and remobilization in rivers. The zone of macroplastic storage can be defined as a river floodplain inundated since the beginning of widespread disposal of plastic waste to the environment in the 1960s and remobilization zone as a part of the storage zone influenced by floodwaters and bank erosion. The amount of macroplastic in both zones can be estimated using data on the abundance of surface- and subsurface-stored macroplastic and the lateral and vertical extent of the zones. Our model creates the framework for estimation of how much plastic has accumulated in rivers and will be present in future riverscapes.

Background: Retinal vascular abnormalities may be associated with glaucomatous damage. Adaptive optics (AO) is a new technology that enables analysis of retinal vasculature at the cellular level in vivo. The purpose of this study is to evaluate retinal arteriolar parameters using the adaptive optics fundus camera (AO -FC) rtx1 in patients with primary open-angle glaucoma (POAG) at different stages and to investigate the relationship between these parameters and changes in optical coherence tomography (OCT) and perimetry. We wanted to assess whether vascular changes could be a cause or effect of glaucomatous damage. Methods: Parameters of retinal supratemporal and infratemporal arterioles (wall thickness (WT), lumen diameter (LD), total diameter (TD), wall-to-lumen ratio (WLR), and cross-sectional area of the vascular wall (WCSA)) were analysed with the rtx1 in 111 POAG eyes, divided into three groups according to the severity of disease and 70 healthy eyes in correlation of structural defects in retinal nerve fibre layer and visual fields defects. Results: Compared with the control group, the POAG groups showed significantly smaller TD and LD values (p<0,05) and significantly higher WLR and WT values (p<0,05) for supratemporal and infratemporal arterioles. Rtx1 parameters significantly correlated with OCT parameters (retinal nerve fibre layer, ganglion cell complex and rim area) and visual field parameters (mean deviation and pattern standard deviation) (p<0.05). Conclusion:  The results suggest that vascular dysfunction may be involved in POAG pathogenesis and neurodegenerative damage, even at the very early stage of glaucoma, without visual field defects.

Alzheimer’s disease (AD) is the most common cause of dementia worldwide. Pathological deposits of neurotoxin proteins within the brain, such as amyloid-Beta and hyperphosphorylated tau tangles, are prominent features in AD. The prion protein (PrP) is involved in neurodegeneration via its conversion from the normal cellular form PrPc, to the infection form PrP Sc. Some studies indicated that posttranslationally modified PrPc isoforms plays a fundamental role in AD pathological progression. Several studies have shown that interaction of Aβ oligomers with N-terminal residues of the PrPc protein region appears critical for neuronal toxicity. The PrPc-Aβ binding always occur in AD brains and is never detected in nondemented controls and the binding of Aβ aggregates to PrPc is restricted to the N-terminus of PrPc.

Pregnancy-induced hypertension and preeclampsia are associated with significant maternal and fetal mortality. A better understanding of those diseases, delineation of molecular pathomechanism, and efficient treatment development are some of the most urgent tasks in obstetrics and gynecology. Recent findings indicate a crucial role of inflammation in the development of hypertension and preeclampsia. Although the mechanism is very complex and needs further explanation, it appears that high levels of cholesterol, urate, and glucose activates NLRP3 inflammasome, which produces IL-1β, IL-18 and gasdermin D. Production of these proinflammatory chemokines is a beginning of local and general inflammation, what results in sympathetic outflow, angiotensin II production, proteinuria, hemolysis, liver damage, immunothrombosis, and coagulopathy. NLRP3 inflammasome is a critical complex in the mediation of inflammatory response, which makes it crucial for the development of pregnancy-induced hypertension and preeclampsia, as well as its complications, such as placental abruption and HELLP syndrome. Herein presented the article delineate molecular mechanisms of those processes, indicating directions of future advance.

The interest in the Spark Plasma Sintering (SPS) technique has continuously increased over the last few years. This article shows the possibility of the development of a SPS device used for material processing and synthesis both in both scientific and industrial applications. This work presents an example of processing Arc-Meleted (half-Heusler, cobalt triantimonide) and SHS-synthesized semiconductors (bismuth telluride) materials with SPS device. The system functionalities expansion is presented, showing the possible way of increasing the information amount obtained about SPS processes and using the SPS apparatus for conducting synthesis of materials and increasing reproducibility and accuracy of process parameters control.

Abstract Background: Massive resection of the small intestine leading to short bowel syndrome (SBS) deprives organism of many immunocompetent cells concentrated in gut associated lymphoid tissue- the largest immune organ in humans. We have aimed to access the influence of bowel resection on adaptive immunity in children, basing on peripheral lymphocyte subsets and serum immunoglobulins. Methods: 15 children, who underwent bowel resection in the first month of life and required further home parenteral nutrition were enrolled into the study.. Based on flow cytometry the following subsets of lymphocytes were evaluated: T, B, NK, CD4+, C8+and activated T cells. Results: Significantly statistical differences were found for the rates of lymphocytes B, T, CD8 + and NK cells. Absolute count of NK cells was lower in SBS group than in the control group. Absolute counts of lymphocytes, lymphocytes B, T, CD4+ and percentages of lymphocytes CD4+, and activated T cells inversely correlated with the time after resection. Conclusions: Children with SBS do not present with clinical signs of immunodeficiency as well as deficits in peripheral lymphocyte subsets and serum immunoglobulins. The tendency of the lymphocyte subpopulations to decrease over time after resection points out the necessity for longer follow- up.

The main objective of this this cross-sectional study was to analyze the influence of lifestyle fac-tors (diet, physical activity, sleep), which can affect the concentrations of fecal short-chain fatty acids (SCFAs) and SCFAs potential role in modulating cardiometabolic disease risk by interact-ing with biochemical and body composition parameters. The study comprised 77 healthy, non-obese individuals, aged 30-45 years who were assessed in the light of SCFAs concentration in stool, diet, physical activity level and sleep duration. Moreover, body composition measurement and patients’ biochemical parameters were included in the analysis. We have indicated a signifi-cant negative correlation between several SCFAs [especially acetic acid (AA), isobutyric acid (IBA), butyric acid (BA), isovaleric acid (IVA) and valeric acid (VA)] with BMI, VAT/SAT ratio (visceral to subcutaneous fat ratio) and percentage of fat mass in a group of females enrolled in the study as well as with waist circumference (WC) in case of both sexes included in the study. Moreover, the results of our study acknowledged the importance of a diet in shaping SCFAs pro-file - we noticed the significant negative associations between energy and fat intake and some SCFAs in males [IBA, IVA, VA, isocaproic acid (ICA)]. In terms of fiber intake, we noticed elevat-ed concentrations of vast majority of SCFAs and amount of SCFAs in total in case of both sexes included in the study. These strong correlations reflect the fact that diet shapes the composition of the gut microbiota and SCFAs (main microbial metabolites) are synthesized from dietary fiber. Furthermore, we noticed that in a group of women, the concentration of AA, propionic acid (PA) and ICA as well as the total concentration of SCFAs showed a significant positive association with their sleep duration. We concluded that SCFAs can have a potential role in modulating car-diometabolic disease risk by interacting with adiposity parameters and diet. In addition, this potential direct link between diet and SCFAs may at least partly contribute to sleep improvement.

The paper presents construction, laboratory tests as well as the first field application of a new fiber-optic rotational seismograph. The system based on fiber-optic gyroscope (FOG) with determined Angle Random Walk of the order of 10-8 rad/Sqrt(s) and a few rad/s maximum detectable amplitude of rotation in the frequency range from DC to 328.12 Hz. It has been designed for rotational seismology area of interest. This work also presents exemplary relevant measurements which were conducted using a set of two devices installed in the geophysical observatory in Książ, Poland.

Aim: To investigate the effects of intensive physical exercise on retinal microvascular regulation in healthy volunteers by the adaptive optics retinal camera measurement. Methods: We included healthy volunteers (11 men and 14 women) aged 20.6± 0.9. Heart rate (HR) and systolic and diastolic blood pressure (SBP, DBP) were recorded before and after a submaximal physical exertion of continuously riding a training ergometer. The superior temporal retinal artery measurements were captured using the adaptive optics (AO) camera rtx1TM (Imagine Eyes, Orsay, France) without pupil dilatation. We compared measures of vessel diameter (VD), lumen diameter (LD), two walls (Wall 1, 2), wall-to-lumen ratio (WLR), and wall cross-sectional analysis (WCSA) before and immediately after the cessation of exercise. Results: Cardiovascular parameters: After exercise, SBP, DBP and HR changed significantly from 130.2±13.2 to 159.7±15.6 mm Hg, 81.2±6.3 to 77.1±8.2 mm Hg and 80.8±16.1 to 175.0±6.2 bpm, respectively (p < 0.002). Retinal microcirculation analysis: Before the exercise, the mean LD was 96.0±6.8, VD 118.5±8.3, WLR 0.234±0.02, WCSA 3802.8±577.6. The mean LD and Wall 1 did not change significantly after exercise but slightly decreased. The VD, Wall 2, WLR and WCSA decreased significantly (p

The objectives of the study were to determine the spatial rate of CO₂ flux (Net Ecosystem Exchange) and soil moisture in a wetland ecosystem applying Sentinel-1 IW (Interferometric Wide) data of VH (Vertical Transmit/Horizontal Receive—cross polarization) and VV (Vertical Transmit/Vertical Receive—like polarization) polarization. In-situ measurements of carbon flux, soil moisture, and LAI (Leaf Area Index) were carried out over the Biebrza Wetland in north-eastern Poland. The impact of soil moisture and LAI on backscattering coefficient (σ°) calculated from Sentinel-1 data showed that LAI dominates the influence on σ° when soil moisture is low. The models for soil moisture have been derived for wetland vegetation habitat types applying VH polarization (R² = 0.70 to 0.76). The vegetation habitats: reeds, sedge-moss, sedges, grass-herbs, and grass were classified using combined one Landsat 8 OLI (Operational Land Imager) and three TerraSAR-X (TSX) ScanSAR VV data. The model for the assessment of Net Ecosystem Exchange (NEE) has been developed based on the assumption that soil moisture and biomass represented by LAI have an influence on it. The σ° VH and σ° VV describe soil moisture and LAI, and have been the input to the NEE model. The model, created for classified habitats, is as follows: NEE = f (σ° Sentinel-1 VH, σ° Sentinel-1 VV). Reasonably good predictions of NEE have been achieved for classified habitats (R² = 0.51 to 0.58). The developed model has been used for mapping spatial and temporal distribution of NEE over Biebrza wetland habitat types. Eventually, emissions of CO₂ to the atmosphere (NEE positive) has been noted when soil moisture (SM) and biomass were low. This study demonstrates the importance of the capability of Sentinel-1 microwave data to calculate soil moisture and estimate NEE with all-weather acquisition conditions, offering an important advantage for frequent wetlands monitoring.

(1) Background: The evaluation of ventricular assist devices requires the usage of biocompatible and chemically stable materials. The commonly used polyurethanes are characterized by versatile properties making them well suited for heart prostheses applications but simultaneously they show low stability in biological environment. (2) Methods: An innovative material - copolymer of poly(ethylene-terephthalate) and dimer linoleic acid - with controlled and reproducible physico-mechanical and biological properties was developed for medical applications. Biocompatibility (cytotoxicity, surface thrombogenicity, hemolysis and biodegradation) were evaluated. All results were compared to medical grade polyurethane currently used in the extracorporeal heart prostheses. (3) Results: No cytotoxicity was observed and no significant decrease of cells density as well as no cells growth reduction was noticed. Thrombogenicity analysis showed that the investigated copolymers have the thrombogenicity potential similar to medical grade polyurethane. No hemolysis was observed (the hemolytic index was under 2% according to ASTM 756-00 standard). These new materials revealed excellent chemical stability in simulated body fluid during 180 days ageing. (4) Conclusions: The biodegradation analysis showed no changes in chemical structure, molecular weight distribution, good thermal stability and no changes in surface morphology. Investigated copolymers revealed excellent biocompatibility and great potential as materials for blood contacting devices.

β-cyclodextrin (CD) derivatives containing aromatic triazole ring were studied as potential carriers of drugs containing an anthraquinone moiety in the structure: anthraquinone-2-sulfonic acid (AQ2S), anthraquinone-2-carboxylic acid (AQ2CA) and a common anthracycline, daunorubicin (DNR). UV-Vis and voltammetry measurements were carried out to determine the solubilities and stability constants of the complexes formed and revealed the unique properties of the chosen CDs as effective pH dependent drug complexing agents. The stability constants of the drug complexes with the CDs containing triazole: βCDLip and βCDGAL were significantly larger than with the native βCD. The AQ2CA and AQ2S drugs are ill-soluble and their solubilities increased as the result of complex formation with βCDLip and βCDGAL ligands. AQ2CA, AQ2S were negatively charged at pH 7.4 and therefore they were less prone to form inclusion complex with the hydrophobic CD cavity than at pH 3 (characteristic of gastric juices) when they were protonated. βCDTriazole and βCDGAL ligands were found to form weaker inclusion complexes with the positively charged drug DNR at acidic pH (pH 5.5) than in the neutral medium (pH 7.4) when the drug dissociates to the neutral, uncharged form. This pH dependence is favorable for anti-tumor applications.

Based on tests results, the possibility of using this solution in the technique of industrial hot forging was evaluated. The results of laboratory tests have confirmed that lubrication of metal pieces is sufficient as well as proved it to be effective in reducing decarburization of the surface layer. Research works conducted in an induction heater showed differences in decarburization depending on a substance and concentration of lubricants that were used. These differences become more apparent when observing the surface layer of the forged parts. Results indicate that decarburization may be reduced to a minimum when we use Bonderite product in a concentration of 66% and 50%. Another lubricant, Berulit 913, may also be used. However, due to burning graphite in high temperatures, reduction of decarburization goes only as far as half of the thickness of the decarbonized layer. Condursal has no significant effect; nevertheless, it protects over the induction heating stage.

On-stream inspections are the most appropriate method for routine inspections during plant operation without going through production downtime. Ultrasonic inspection, one of the on-stream inspection methods, faces challenges when performed at high temperatures exceeding the recommended 52°C. This study aims to determine the ultrasonic velocity and attenuation with the known material grade, thickness, and temperatures by comparing theory calculation versus experiment with temperatures ranging between 30°C to 250°C on low carbon steel covering most petrochemical equipment material and working conditions. The theoretical analysis was to obtain Young's modulus, Poisson's ratio, and longitudinal velocity at different temperatures. The experiments validated the predicted results of ultrasonic change due to temperature increase and showed a maximum error of 3%. The experimental data of velocity and decibel change from the temperature range provide a reference for the future when dealing with unknown materials information on site that require a quick corrosion status determination.

Background Ultrasonographic measurement of the optic nerve sheath diameter (ONSD) is helpful in the assessment of intracranial pressure. The aim of this study was to determine whether the Trendelenburg position during laparoscopic urological surgery changed the ONSD and whether changes correlated with postoperative complications. Methods In this prospective study, we measured ONSD before patients were placed in the Trendelenburg position. Then the Trendelenburg position was established by tilting the operating table to 20-25 degrees. After surgery, the patients were placed in a horizontal position, and the second measurement of ONSD was obtained. Results The study included 69 patients. The average preoperative ONSD in the right eye was 5.8 ± 0.7 mm and 5.8 ± 0.8 mm in the left eye. The average postoperative ONSD in the right eye was 6.6 ± 0.8 mm and 6.6 ± 0.7 mm in the left eye. The differences between postoperative and preoperative values in the right and left eyes were statistically significant (p <0.000001). ONSD increases above the norm did not correlate with the incidence of postoperative nausea (p = 0.94), delirium (p = 0.81), or the time to patient awakening (p = 0.29). Conclusion ONSD increased in patients who underwent surgical procedures performed in the Trendelenburg position, but the increase did not correlate with postoperative complications.

The description of protein disordered states is important for understanding protein folding mechanisms and their functions. In this short review, we briefly describe a simulation approach to modeling disordered protein interactions and unfolded states of globular proteins. It is based on the CABS coarse-grained protein model that uses a Monte Carlo (MC) sampling scheme and a knowledge-based statistical force field. We review several case studies showing that description of protein disordered states resulting from CABS simulations is consistent with experimental data. The case studies comprise investigations of protein-peptide binding and protein folding processes. The CABS model has been recently made available as the simulation engine of multiscale modeling tools enabling studies of protein-peptide docking and protein flexibility. Those tools offer customization of the modeling process, driving the conformational search using distance restraints, reconstruction of selected models to all-atom resolution and studies of large protein systems in a reasonable computational time. Therefore, CABS can be combined in integrative modeling pipelines incorporating experimental data and other modeling tools of various resolution.

Butanol extracts from leaves, twigs and fruits of Elaeagnus rhamnoides (L.) A. Nelson (sea buckthorn, SBT) were fractionated into phenolic and non-polar lipid components. Their chemical composition was analyzed using the Thermo Ultimate 3000RS chromatographic system, equipped with a diode array detector, a corona-charged aerosol detector, and coupled with a (Q-TOF) mass spectrometer. Assuming that an effect on natural microbiotaand host epithelial cells needs to be assessed, regardless of the purpose of using SBT formulations in vivo, the MIC/MBC/MFC of the fractions and reference phytocompounds were screened involving 17 species of Gram-positive and Gram-negative bacteria and Candida species. The impact of the fractions (subMIC) on the important in vivo persistence properties of S. aureus and C. albicans strains was evaluated. Tests for adhesion and biofilm formation on an abiotic surface and the surfaces conditioned with fibrinogen, collagen, plasma or artificial saliva showed the inhibitory activity of the fractions. The effects on FITC-labeled staphylococci adhesion to fibroblasts (HFF-1) and epithelial cells (Caco-2), and on fungal morphogenesis, indicated that SBT extracts have high anti-virulence potential. Cytotoxicity tests (MTT-reduction) on the standard fibroblast cell line showed variable biological safety of the fractions depending on their composition and concentration.

We recently proposed that topological quantum computing might be based on $SL(2,\mathbb{C})$ representations of the fundamental group $\pi_1(S^3\setminus K)$ for the complement of a link $K$ in the $3$-sphere. The restriction to links whose associated $SL(2,\mathbb{C})$ character variety $\mathcal{V}$ contains a Fricke surface $\kappa_d=xyz -x^2-y^2-z^2+d$ is desirable due to the connection of Fricke spaces to elementary topology. Taking $K$ as the Hopf link $L2a1$, one of the three arithmetic two-bridge links [the Whitehead link $5_1^2$, the Berge link $6_2^2$, the double-eight link $6_3^2$] or the link $7_3^2$, the $\mathcal{V}$ for those links contains the reducible component $\kappa_4$, the so-called Cayley cubic. In addition, the $\mathcal{V}$ for the later two links contains the irreducible component $\kappa_3$, or $\kappa_2$, respectively. Taking $\rho$ to be a representation with character $\kappa_d$ ($d<4$), with $|x|,|y|,|z| \le 2$, then $\rho(\pi_1)$ fixes a unique point in the hyperbolic space $\mathcal{H}_3$ and is conjugate to a $SU(2)$ representation (a qubit). Even though details on the physical implementation remain open, more generally, we show that topological quantum computing may be developed from the point of view of three-bridge links, the topology of the $4$-punctured sphere and Painlev\'e VI equation. The $0$-surgery on the $3$ circles of the Borromean rings L6a4 is taken as an example.

Using a breast cancer (BC) cellular model: MDA-MB-231 cells with blocked synthesis of galacto-sylceramide (GalCer; MDA.Δ.UGT8.4) and MCF7 and T47D cells that over-produced GalCer (MCF7.UGT8 and T47D.UGT8), we found that GalCer increased resistance to doxorubicin, paclitaxel, and cisplatin serving as an anti-apoptotic molecule. These results were supported by a study using murine mammary carcinoma 4T1 cells over-producing GalCer, which were trans-planted into Balb/c mice and were more resistant to doxorubicin therapy than the control. Sub-sequent studies revealed that GalCer specifically downregulated the level of pro-apoptotic TNFRSF1B and TNFRSF9 genes and increased the level of the anti-apoptotic BCL2 gene expres-sion, suggesting that GalCer regulates their expression at the level of transcription. Consistent with this hypothesis, MDA-MB-231 and MCF7.UGT8 cells with high GalCer content showed lower activity of TNFRSF1B and TNFRSF9 promoters than cells lacking GalCer. In contrast, the activity of the BCL2 promoter in MCF7.UGT8 was higher than in MCF7 cells without GalCer. However, no difference in BCL2 promoter activity was observed between MDA-MB-231 cells with high GalCer level and GalCer-negative MDA.Δ.UGT8.4 cells. Instead, we found that GalCer increased the stability of Bcl-2 mRNA. As a candidate protein that simultaneously increases the expression of TNFRSF1B and TNFRSF9 genes and decreases the expression of BCL2 gene and stability of Bcl-2 transcripts is probably p53, its expression was analysed in BC cells containing various amounts of GalCer. In agreement with this hypothesis, BC cells with high GalCer con-tent are characterized by significantly lower expression of p53, and inhibition of p53 using siR-NA resulted in decreased expression of TNFRS1B and TNFRS9 genes and increased expression of BCL2 gene.

Growing acreage and changing consumer preferences cause increasing interest in the cereal products originating from organic farming. Lack of results of objective test, however, does not allow drawing conclusions about the effects of cultivation in the organic system and comparison to currently preferred conventional system. Field experiment was conducted in organic and conventional fields. Thirty modern cultivars of winter wheat were sown. They were characterized for disease infection including Fusarium head blight, seed sowing value, the amount of DNA of the six species of Fusarium fungi as well as concentration of ergosterol and trichothecenes in grain. The intensity Fusarium head blight was at a similar level in both systems. However, Fusarium colonization of kernels expressed as ergosterol level or DNA concentration was higher for the organic system. It did not reflect in an increased accumulation of trichothecenes in grain, which was similar in both systems, but sowing value of organically produced seeds was lower. Significant differences between analyzed cropping systems and experimental variants were found. The selection of the individual cultivars for organic growing in terms of resistance to diseases and contamination of grain with Fusarium toxins was possible. Effects of organic growing differ significantly from the conventional and grain obtained such way can be recommended to consumers. There are indications for use of particular cultivars bred for conventional agriculture in the case of organic farming, and the growing organic decreases plant stress resulting from intense fertilization and chemical plant protection.

Background/Objectives: The aim of the project is a longitudinal assessment of body image and mental health in scoliosis females pre-, postoperatively and in a follow-up, and implementation (one group-CBT scoliosis sample, CBTSS) or not (second group-control scoliosis sample, CSS) of CBT interventions. A healthy female sample (HFS) was also selected for comparative purposes. Methods. 36 in total AIS patients participated in the 1st and 2nd study phases, whereas 23 were eligible in the follow-up. Regarding HFS, 18 participants were included in the study. The CBT intervention took place pre- and postoperatively, during the patients' stay in hospital. Participants completed the Spinal Appearance Questionnaire (SAQ), Body Esteem Scale (BES) and Strengths and Difficulties Questionnaire-25 (SDQ-25). Body image was also assessed using a virtual reality-based application “Avatar Scoliosis 3D”. Results: The difference between the desired and objective, actual body shape is significant preoperatively both in the CBTSS and CSS at p

Nanowater (NW-water declusterized in the cold plasma generator) can potentially ameliorate ram semen quality after freezing. Eighteen ejaculates from six Olkuska rams were divided into six equal portions each, and then diluted (800 × 106 spermatozoa/ml) and frozen in the fructose-skimmed milk-egg yolk Kareta extender containing 3% or 7% of glycerol (C3% and C7%) and diluted in deionized water (DW) or NW declusterized for 15 min (NW15)’ or 30 min (NW30’). All frozen-thawed semen samples were subjected to standard evaluation. In addition, ex situ survival time of spermatozoa was measured, and the proportions of apoptotic, necrotic and live sperm were determined by flow cytometry. The percentage of spermatozoa with mid-piece defects was lower (p &lt; 0.05) in NW15’-3% compared with C3%. The mean survival time of spermatozoa was greater (p &lt; 0.05) in NW30’ extenders compared with their respective controls. The proportion of necrotic spermatozoa 1 h after thawing was greater (p &lt; 0.05) in C7% compared with NW30’-7%, whereas the proportion of live cells detected immediately and 1 h after thawing were greater (p &lt; 0.05) in NW30’-7% than in C7%. NW enhanced cryoprotective effects of glycerol-containing extenders with an overall increase in sperm survivability being greater with 7% than 3% of glycerol.

Endometrial Cancer (EC) is the sixth most commonly occurring cancer in women with 380 000 cases in 2018. Sadly, EC morbidity and mortality are continuously increasing, therefore the medical society have a substantial need for an accurate and inexpensive diagnostic test for EC early detection and a prognostic tool for treatment planning and evaluation. Considering experience with different types of cancers C-reactive protein (CRP) appears to be a promising diagnostic and prognostic factor. Aiming to investigate its potential and in view of EC authors, this paper reviewed the following databases for metanalysis, randomized controlled trials and review articles published up to June 2020: Pubmed, Scopus, Google scholar and ClinicalKey. Studies indicate CRP >3.33 mg/l correlate with EC incidence with HR = 2.29 (p<0.05). Moreover, High-sensitivity CRP assay allows to detect CRP in very low concentrations and distinguish patients with endometriosis, soft tissue sarcomas and possibly EC. Preoperational and postoperational CRP, as well as its dynamic change are independent prognostic factors for EC and are more reliable if analyzed together. However, CRP-to-albumin ratio as well as Glasgow Prognostic Scale have greater prognostic value that CRP alone. Additionally, CRP is possibly a mediator of carcinogenesis and cancer progression through activation of inter alia FcgRs/MAPK/ERK, FcgRs/IL-6/AKT/STAT3 and FcgRs/NF-κB/NLRP3 pathways.

One way to reduce the negative impact of human activity on the natural environment is to use natural, easily available and relatively cheap to produce compounds in industrial processes. One such compound is naturally occurring calcium carbonate (CaCO3). This compound has adsorption properties so that it can be an alternative to commonly used adsorbents. The aim of this work is to determine the possibility of using CaCO3 to remove pharmaceutical substances such as sulfadiazine and tetracycline from water. The CaCO3 used in this work was synthesised using our own method, which allows the production of CaCO3 particles with nanometric size. In the conducted research, calcium carbonate was used in the form of a suspension in purified solutions and as an inorganic filling of the developed membranes. The mass of pharmaceutical substances removed from their aqueous solutions was determined in the tests carried out. Based on the results obtained, it can be concluded that CaCO3 has the ability to adsorb both tetracycline and sulfadiazine. In suspension tests, the mass of the removed substances per unit mass of adsorbent was 1.52 mg/g and 6.85 mg/g, respectively. In turn, in the case of the process using the developed membranes, the mass of the removed substances per unit mass of adsorbent was 232 mg/m2 and 524 mg/g, which is a several times greater increase in the mass of the removed substance compared to the process using an unmodified membrane.

The scope of this paper is to compare different dental sealants and flow materials indicated for sealing pit and fissures considering their chemical formula. The narrative review aims to address the questions: What is the essence of different dental sealants’ activity, how their chemical formula affects their mechanisms of caries prevention and what makes a dental sealant efficient mean of caries prevention. Another vital issue is whether the sealants which contain fluoride, or any other additions have potentially increased antimicrobial properties. Methods: An electronic search of the PubMed, Cochrane, Web of Science and Scopus databases was performed. The following keywords were used: (dental sealants) AND (chemical composition). Additionally, information about composition and indications for clinical use provided by manufacturers were utilized. The review aims are to find crucial elements of sealants’ composition which affect their cariostatic mechanisms.

Here, we designed the composition of the coating of the paper sheets composed of chitosan, bacterial cellulose (nanofibres), and ZnO with boosted antibacterial and mechanical activity. We investigated the compositions with ZnO exhibiting two different sizes/shapes: (1) rods and (2) irregular sphere-like particles. The proposed processing of bacterial cellulose resulted in the formation of nanofibers. Antimicrobial behavior was tested using E. coli ATCC® 25922™ following ASTM E2149-13a standard. Mechanical properties of the paper sheets were measured by comparison of tearing resistance, tensile strength, and bursting strength according to ISO 5270 standard. The increased antibacterial response is assigned to the combination of chitosan and ZnO (independently of its shape and size), while the boosted mechanical behavior is due to bacterial cellulose nanofibers. Therefore, the proposed composition is an interesting multifunctional mixture for coatings in food packaging applications.