This paper aims to provide an adaptation of the TL-moments method to censored data. The present study concentrates on Type-I censored data. The idea of using TL-moments with censored data may seem conflicting. But our perspective in that, we may use data censored from one side and trimmed from the other side. This study is applied to estimate the two unknown parameters of the Weibull distribution. The suggested point is compared with Direct L-moments and ML methods. A Monte Carlo simulation study is carried out to compare these method in terms of estimate average, root of mean square error (RMSE) and relative absolute biases (RAB).

This paper discusses domestic problem of waiting hot water for the shower use till it reaches satisfactory temperature, which result a lot of wastage in fresh water. The outcome from research survey shows that there is no satisfactory solution till now as all solutions were either expensive or with no effective results. Local small inline electric heater equipped with fuzzy logic controller is proposed in this paper to be installed just before the showerhead to measure the water temperature and flow before the showerhead, as control input-variables, and decide the operating voltage of the heater, as control output-variable (MISO). MATLAB Simulink is used to model the proposed system. Different test cases are simulated to prove the performance and the safe operation of the system. Techno-economic study is carried out to determine the “Direct Benefits” and “Indirect Benefits” that can be achieved if such system is implemented in wide range. Azerbaijan data is taken as an example to calculate the economic benefits. The results show important benefits not only for economy but also for climate and the reduction of CO₂ gas emission. Different economic indices are provided to be an easy reference for decision makers and project managers.

Background: Antibiotic resistance is an overwhelming serious difficulty globally. This necessitates the exploration of novel sources of antibiotics to overcome this challenge. Aim of the study: Bacterial Myxopyronin A production from various soil environments Egypt; as well as testing its antimicrobial activity in preclinical animal testing and randomized human clinical trials phases 1/2. Type of the study: Screening experimental study. Methodology: Different soil environments in Egypt were screened for the growth of bacterial isolates producing Myxopyronin A as an antimicrobial agent. Purification of Myxopyronin A was performed via reversed-phase HPLC. Paper disc diffusion assay, as well as the Broth dilution technique, were exploited to assess the invitro antimicrobial and minimum inhibitory concentration( MIC) of the test antibiotic. Furthermore, in vivo antimicrobial spectrum, adverse drug reactions, and pharmacokinetics were detected during animal model testing stages and human randomized clinical trials phases 1/2. Results: From the culture supernatant of the Myxobacterium Myxococcus fulvus 124B02 which was the predominant soil bacterial isolate grown on the Casein yeast peptone plate, Myxopyronin A was produced. The test antibiotic blocked the growth of many Gram +ve bacteria with MICs less than 100 mcg/ ml. In contrast, it inhibited the growth of a few Gram -ve bacteria such as Escherichia coli at MICs greater than 100 mcg/ ml. On the other hand, Eukaryotic cells such as fungal and human cells were not affected. Prokaryotic DNA-dependant-RNA polymerase( RNLP) was noticed to be inhibited via the test antibiotic suggesting its bactericidal action. The maximum concentration was 7-8 mcg/ ml at a maximum time of 2 hours when 600 mg dose was orally administered in randomized human clinical trials phases 1/2, and T1/2 reached 2.5 hours following first-order kinetics of elimination. The duration of its action was nearly 12 hours after oral administration. Rare toxicity was detected during preclinical and randomized human clinical trials phases 1/2 in the form of mild diarrhea and cholestatic jaundice in less than 5 % of experimental candidates. Conclusion: The present study was promising due to the bactericidal antibiotic Myxopyronin A production from Myxococcus fulvus 124B02 isolated from different soil environments in Egypt.

In the present study, fish were exposed to sub-lethal doses of CuONPs (68.92 ± 3.49 nm) (10, 20, and 50 mg/L) for a long exposure period (25 days). Compared to the control group (0.0 mg/L CuONPs), a significant dose-dependent elevation in blood urea and creatinine values, serum alanine transaminase, aspartate transaminase, and alkaline phosphatase enzyme activities were evident in CuONPs-exposed groups (P < 0.05). Fish exposure to 50 mg/L CuONPs significantly upregulated the transcription of pro-inflammatory cytokines (tumor necrosis factor-alpha, interleukin-1beta, interleukin 12, and interleukin 8), heat shock protein 70, apoptosis-related gene (caspase 3), and oxidative stress-related (superoxide dismutase, catalase, and glutathione peroxidase) genes in liver and gills of the exposed fish in comparison with those in the control group (P < 0.05). Moreover, varying histopathological injuries were noticed in the hepatopancreatic tissues, posterior kidneys, and gills of fish groups correlated to the examined exposure dose of CuONPs. In summary, our results provide new insights and helpful information for better understanding the mechanisms of CuONPs toxicity in Nile tilapia at hematological, molecular levels, and tissue levels.

Background: Catalase is a vital antioxidant enzyme that dismutates H₂O₂ into water and molecular oxygen. Many protocols have been developed to measure catalase enzyme activity. Spectrophotometric methods are the most common assays that used to assess catalase enzyme activity. Methods: Because the rate-limiting step during catalase enzyme activity depends upon the dissociation of hydrogen peroxide, the developed assay measures the reaction between a hydroquinone/anilinium sulfate/ammonium molybdate reagent and Unreacted Hydrogen Peroxide, which results in the production of a purple, disubstituted quinone compound with a maximum absorbance value at 550 nm. Results: To clarify the precision of the developed method, the coefficients of variation were determined to be 2.6% and 4.7% for within run measurements and between run measurements, respectively. This method returned results that correlated well (r = 0.9982) with the results returned using the peroxovanadate method to assess catalase enzyme activity. Additionally, we examined the use of the newly developed hydroquinone assay to measure catalase enzyme activity in liver and bacterial homogenate samples. Conclusion: These results demonstrated that this assay can be used for scientific research and routine health applications because it is inexpensive, simple, accurate, and rapid. This method is suitable for use in clinical pathology laboratories because it is simple and produces precise and reproducible results.

Background: Antibiotic resistance is an urgent issue everywhere in the globe. It is necessary to look into new sources of antibiotics to address this issue. Aim of the study: studying the purification of Corallopyronin B from various soil conditions in Egypt, as well as the antibacterial effectiveness of Corallopyronin B in preclinical animal testing and randomized human clinical trials phases 1/2. Type of the study: Screening experimental study. Methodology: Several soil conditions in Egypt were examined to create bacterial isolates that generated the antibiotic chemical Corallopyronin B. Using reversed-phase HPLC, Myxopyronin B was purified. The test antibiotic's minimum inhibitory concentration( MIC) and in vitro antibacterial activity were ascertained using the paper disc diffusion assay and the broth microdilution technique. Furthermore, in stages 1/2 of randomized clinical trials including human and animal models, pharmacokinetics, adverse drug reactions, and the in vivo antibacterial spectrum were discovered. Results: The soil bacterial isolate Corallococcus coralloides DSM 2259, which was grown on a Casein yeast peptone( CYP) plate, produced Corallopyronin B from its culture supernatant. At MICs more than 100 mcg/ml, the test antibiotic inhibited the growth of many Gram -ve bacteria, including Escherichia coli, while also preventing the growth of numerous Gram +ve bacteria, with MICs ranging from 1 to 10 mcg/ml. Eukaryotic cells, on the other hand, including those in humans and fungi, were unharmed. The test antibiotic was shown to have a bactericidal effect by inhibiting bacterial DNA-dependent RNA polymerase( RNLP). In phases 1/2 of randomized human clinical trials, when 600 mg of the dose per 70 kg of body weight was administered SC, the Cmax was 8.6 mcg/ml at Tmax 1 hour; T1/2 reached 136 min following first-order kinetics of elimination. It stopped acting around 6-7 hours after SC was administered. In the preclinical and randomized human clinical trial phases 1/2, less than 6 percent of experimental candidates had uncommon toxicity, which showed up as reduced bile flow. Protein binding with plasma albumin was detected which reached about 83%. Conclusion: The current work was noteworthy since it involved the production of the bactericidal antibiotic Corallopyronin B from Corallococcus coralloides DSM 2259 which was isolated from several soil environments in Egypt.

Background: Nutritional rickets is still considered as a global health problem especially in low-resource countries and immigrant societies of developed countries. Generalized skeletal deformities including angular knee deformities as genu varum and genu valgum are prominent features of nutritional rickets. Angular knee deformities can cause gait difficulties. However, the true remodelling potential of the healed knee deformities is largely unknown to the pediatric and orthopedic community. Aims: The primary objective of this study protocol is to investigate the natural history of disease in regard to the remodelling potential of angular knee deformities in children and adolescents with healed nutritional rickets. And determine the potential patient- and deformity-related factors that are associated with a favorable deformity remodelling as age and sex of patients and type, severity, laterality of deformities etc. Methods: This will be a prospective observational analytical cohort natural history of disease study. A minimum of at least 140 knees with healed nutritional rickets and angular knee deformities will be observed at regular three-monthly intervals over a period of at least one year. We will report two outcome variables namely; clinical and radiological tibio-femoral angle. And independent patient and deformity-related variables as age, sex, deformity type, severity and laterality. Inferential statistics namely bivariate and multivariate analysis will be employed accordingly to identify the relation between outcome variables and the different independent variables. Ethics and dissemination: This protocol study has been approved by the institutional research ethics committee. Results will be presented at conferences and submitted to relevant international and society publications. Authors will also communicate the results to their scholarly networks and post them on scholarly networking sites. Conclusions: This study has the potential for improving the decision-making process as to which patients deserve conservative treatment and which deserve surgical deformity correction. Results are expected to have an impact on the clinical practice of pediatricians, orthopedic surgeons and family physicians alike.

Cannabis sativa is one of the oldest plants utilized by humans for both economic and medical purposes. Although the use of cannabis started millennia ago in the Eastern part of the hemisphere, its use has moved and flourished in the Western Nations in more recent centuries. C. sativa is the source of psychoactive cannabinoids that are consumed as recreational drugs worldwide. The C21 aromatic hydrocarbons are restricted in their natural occurrence to cannabis (with a few exceptions). Delta-9-tetrahydrocannabinol (Δ9-THC) is the main psychoactive component in cannabis with many pharmacological effects and various approved medical applications. However, a wide range of side effects are associated with the use of Δ9-THC, limiting its medical use. In 1966, another psychoactive cannabinoid, Delta-8-tetrahydrocannabinol (Δ8-THC) was isolated from marijuana grown in Maryland but in very low yield. Δ8-THC is gaining increased popularity due to its better stability and easier synthetic manufacturing procedures compared to Δ9-THC. Passing the U.S. Farm Bill in 2018 led to an increase in the sale of Δ8-THC in the United States. The marketed products contain Δ8-THC from synthetic sources. In this review, methods of extraction, purification, and structure elucidation of Δ8-THC will be presented. The issue of whether Δ8-THC is a natural compound or an artifact will be discussed, and the different strategies for its chemical synthesis will be presented. Δ8-THC of synthetic origin is expected to contain some impurities due to residual amounts of starting materials and reagents as well as side products of the reactions. The various methods of analysis and detection of impurities present in the marketed products will be discussed. The pharmacological effects of Δ8-THC, including its interaction with CB1 and CB2 cannabinoid receptors in comparison with Δ9-THC, will be reviewed.

A comprehensive kinetic model of the Fischer-Tropsch synthesis (FTS) is developed in a fixed bed reactor under operating conditions (temperature, 230–235°C, pressure, 20–25 bar, gas hourly space velocity, 4000–5000 cm³(STP)/h/g_catalyst ,H₂/CO feed molar ratio, 2.1) over a Co based catalyst. Reaction rate equations based on Eley-Rideal (ER) type model for initiation step and Langmuir-Hinshelwood-Hougen-Watson (LHHW) type model for propagation and termination steps of the FTS reactions have been considered and the readsorption of olefins were taken into account. The model that was reported in the literature was modified in order to explain many significant deviations from the ASF distribution. Optimum parameters have been obtained by Genetic Algorithms (GA). The calculated activation energies to produce n-paraffins and 1-olefins were in the range of 82.24 to 90.68 kJ/mol and 100.66 to 105.24 kJ/mol, respectively. The hydrocarbon distribution in FTS reactions was satisfactorily predicted particularly for paraffins.

Background: RSV, or respiratory syncytial virus, is a deadly condition that is present all over the world today. The infection is initially contained in the lower respiratory tract without systemic transmission. The objective of the study: Bioinformatics was used in Egypt to create an mRNA vaccine against the Respiratory syncytial virus (RSV). Methodology: In the present screening experimental study, a lipid nanoparticles vaccine of mRNA of the surface fusion protein of Respiratory syncytial virus was manufactured. The present vaccine delivery system was lipid nanoparticles with a particle size of approximately 90 nanometres, manufactured by the hot micro-emulsion method. In stages 1 and 2 of clinical trials, the immunogenicity of the current mRNA RSV vaccine was evaluated. Results: The current vaccine demonstrated 81% immunogenicity in animal testing, but only 69% in stages 1 and 2 of clinical trials. Its side effects were manageable. The results persisted for a while. In the current trial, the vaccination proved effective as a preventative measure against RSV infection. The current vaccination lacked antibody-dependent enhancement, which causes non-protective antibodies to develop. These non-neutralizing antibodies exacerbate infection by activating cytokines and complement cascade through the formation of immune complexes or enhancement of the virus entry and replication in the host cells. On the other hand, the current RSV mRNA vaccine of the surface fusion protein consequent on the production of powerful neutralizing antibodies with prolonged immunity especially to infants and elderly candidates who received the optimal dosage regimen.

G-protein coupled receptors (GPCRs), one of the largest superfamilies of cell-surface receptors, are heptahelical integral membrane proteins that play critical roles in virtually every organ system. G-protein-coupled receptors operate in membranes rich in cholesterol, with an imbalance in cholesterol level within the vicinity of GPCR transmembrane domains affecting the structure and/or function of many GPCRs, a phenomenon that has been linked to several diseases. These effects of cholesterol could result in indirect changes by altering the mechanical properties of the lipid environment or direct changes by binding to specific sites on the protein. There are a number of studies and reviews on how cholesterol modulates class A GPCRs, however, this area of study is yet to be explored for class C GPCRs, which are characterized by a large extracellular region and often form constitutive dimers. This review highlights specific sites of interaction, functions, and structural dynamics involved in the cholesterol recognition of the class C GPCRs. We summarize recent data from some typical family members to explain the effects of membrane cholesterol on the structural features and functions of Class C GPCRs and speculate on their corresponding therapeutic potential.

The increase in incidence of superficial fungal infections combined with the emergence of antifungal resistance represents both a global health challenge and a considerable economic burden. Recently, dermatophytes, the main culprit causing superficial fungal infections, have started to exhibit antifungal resistance. This can be observed in some of the most common species such as Trichophyton rubrum and Trichophyton mentagrophytes. Importantly, the new subspecies, known as Trichophyton indotineae, has been reported to show high resistance to terbinafine, a first-line treatment for dermatophyte infections. Compounding these issues is the realization that diagnosing the causative infectious agents requires using molecular analysis that goes beyond the conventional macroscopic and microscopic methods. These findings emphasize the importance of conducting antifungal susceptibility testing to select the appropriate antifungal necessary for successful treatment. Implementing these changes may improve clinical practices that combat resistant dermatophyte infections.

Objectives: Multicentric Osteolysis, Nodulosis, and Arthropathy (MONA) syndrome is a rare genetic skeletal dysplasia. Its diagnosis can be deceptively similar to childhood-onset genetic skeletal dysplasias and juvenile idiopathic arthritis. We aimed to report the syndrome’s clinical and radiologic features with emphasis on skeletal manifestations. And establish relevant phenotype-genotype correlations. Methods: We evaluated two boys, 4-and-7-years-old with MONA syndrome. Both patients had consanguineous parents. We verified the diagnosis by correlating the outcomes of clinical, radiologic and molecular analysis. We specifically evaluated the craniofacial morphology and clinical and radiographic skeletal abnormalities. We contextualized the resultant phenotype-genotype correlations to publications on MONA and its differential diagnosis. Results: Skeletal manifestations were the presenting symptoms and mostly restricted to hands and feet in terms of fixed extension deformity of the metacarpophalangeal and flexion deformity of the interphalangeal joints with extension deformity of big toes. There were arthritic symptoms in the older patient especially of the wrists and minute pathologic fractures. The skeletal radiographs showed osteopenia/dysplastic changes of hands and feet. Both patients had variants in the matrix metalloproteinase2 gene which conformed to phenotype of previously reported literature in one patient while the other had a novel variant which conformed to MONA phenotype. Craniofacial abnormalities were present. However, minimal extra-skeletal manifestations. Conclusion: Overall, there is an emerging distinctive skeletal pattern of involvement in terms of both clinical and radiographic features. This includes age of onset and location of presenting skeletal manifestations, chronological order of joint affection, longitudinal disease progression, specifics of skeletal radiographic pathology and craniofacial features. Nevertheless, physicians are cautioned against differential diagnosis of similar genetic skeletal dysplasias and juvenile idiopathic arthritis.

This review provides an understanding of the teaching and practising of forensic accounting across the globe. It includes a review of published forensic accounting studies that conclude that forensic accounting is of benefit to both students and professionals. Despite this, there are areas of concern; namely, the insufficiency of an appropriate structure of regulation and a lack of control over the academic qualifications to enter the profession. This review of both the teaching and practising of forensic accounting provides an overview of the vital issues and concerns that must be understood in order to advance the essential application of forensic accounting. It is expected that this review will influence future policy that will advance business and limit episodes of fraud. The amount of published literature on the subject of forensic accounting is widespread and diverse. However, there is a lack of comprehensive understanding regarding the strengths and weaknesses of forensic accounting; this review will address this and provide policymakers with a thorough explanation of the subject.

The importance of understanding the corrosion mechanisms of excavated metal artefacts help in determining the physico-chemical parameters of the burial environment and the formation of different corrosion products. These products can be observed and analysed with the help of various techniques that provide information on their morphology, chemical composition and structure. The analysis of ancient coins is extremely challenging in the presence of heavily corroded surfaces; as quantitative information may not exactly concur with its bulk composition. In the case of silver coins, the use of surface information can be used as a guide for bulk composition only. The current study carries out investigation and characterization of selected coins from a large coin hoard excavated from Amheida, Dakhla oasis, Egypt. The study and analysis of the alloy composition and corrosion products was performed using a multi-technique approach which included Light optical microscopes, Scanning Electron microscope (SEM) coupled with energy dispersive spectroscopy (EDS) and X-ray diffraction analysis. Investigation of the coins revealed the presence of a thick active inhomogeneous corrosion crust, while analysis showed that the coins were made from a binary silver copper alloy (billon) while the corrosion crust was rich in chlorides and carbonates, later identified by XRD analysis as Paratacamite, Malachite and Chrysocolla.

Chemoinformatics is the combination of physical chemistry theory with computer and information science techniques "in silico techniques" to a variety of descriptive and prescriptive chemistry issues, including applications to biology, drug discovery, and related molecular areas. On the other hand, machine learning has become a vital tool for drug designers to mine chemical information from enormous compound databases in order to build medications with important biological features. In Egypt, chemoinformatics were used recently in different applications. For example; the development of new antimicrobial agents like tetracycline analog B (Iodocycline). Another area of application in bioinformatics included heart disease classification based on hybrid ensemble stacking technique. In the era of COVID-19, hybrid approach for COVID-19 detection from chest radiography was applied. Furthermore, bio/chemoinformatics methods were used to compare antimicrobial medications in order to choose an effective nose-to-brain formulation targeting meningitis infection by using differences in the drugs' primary structural, topological, and electronic characteristics. An example for this included cefotaxime and ceftriaxone that were examined at three levels: at formulation level, by comparing the loading in gelatin and tripalmitin matrices as basis for the production of nanoparticulate systems, at biopharmaceutical level, through interaction with mucin and the P-gp efflux pumps, and at therapeutic level, through studying the interaction with S. pneumoniae bacterial receptors.

This paper introduces the complex Rayleigh-van der Pol-Duffing oscillators (RVDOs), which are hyperchaotic and can be either autonomous or non-autonomous. The fundamental dynamics of the autonomous and nonautonomous complex RVDOs including dissipation, symmetry, fixed points and their stability are studied. These oscillators are found in various important fields of physics and engineering. The paper proposes a scheme to achieve phase synchronization (PS) and antiphase synchronization (APS) for different dimensional models. These kinds of synchronization are considered as generalization of several other types of synchronization. For this scheme we use the active control method based on Lyapunov stability theory. By analytically determining the control functions, the scheme achieved PS and APS. Our scheme is applied to study PS of hyperchaotic behaviours for two distinct hyperchaotic non-autonomous and autonomous complex RVDOs. Additionally, the scheme is employed to achieve APS of chaotic real non-autonomous RVDO and hyperchaotic complex autonomous RVDO, including those with different dimensions. Our work presents numerical results that plot the amplitudes and phases of these hyperchaotic behaviours, demonstrating the successful achievement of PS and APS.

Despite being extremely potent against malignancies, cisplatin (CIS) has limited practical applicability due to its adverse effects such as testicular damage. Consequently, it becomes necessary to reduce its toxicity. In this study, cilostazol, a selective phosphodiesterase-3 inhibitor that is frequently used in the treatment of intermittent claudication, was examined for its ability to abrogate CIS-induces testicular toxicity and its ameliorative effect was compared with two phosphodiesterase inhibitors, tadalafil and pentoxifylline. The study also focused on the possible mechanisms involved in the proposed protective effect. Ten groups of rats were included; Group (1): control, Groups (2-4): 5 mg/kg tadalafil or 75 mg/kg pentoxifylline or 20 mg/kg cilostazol respectively), Group (5):7 mg/kg CIS, Group (6&7): CIS + 5 mg/kg tadalafil or 75 mg/kg pentoxifylline, Group (8-10) CIS+ 5, 10 or 20 mg/kg cilostazol respectively. CIS treated rats showed a significant decrease in testicular function, serum testosterone and reduced glutathione levels, and significant elevation in malondialdehyde, total nitrite levels, tumor necrosis factor-alpha and nuclear factor-kappa β alongside caspase-3. These outcomes were confirmed by marked testicular architecture deterioration. Contrary, Cilostazol in a dose-dependent manner showed potential protection against testicular toxicity, reversion of the disrupted testicular function and improvement of the histological alterations through rebalancing of oxidative stress, inflammatory and apoptotic biomarkers. In addition, cilostazol exerted more pronounced protective effect in comparison to tadalafil and pentoxifylline. In conclusion, administrations of cilostazol might ameliorate cisplatin-induced testicular impairment through alteration of oxidative stress, inflammation, and apoptotic pathway, offering a promising treatment for cisplatin -intoxication in the testes.

Background: Across the world, antibiotic resistance is a critical challenge. To address such a problem, it has to be done to investigate new antibiotic sources. Aim of the study: Study of the antibacterial activity of Corallopyronin A in preclinical animal testing and randomized human clinical trials stages 1/2, as well as investigating the purification of Corallopyronin A from different soil conditions in Egypt. Type of the study: Screening experimental study. Methodology: Egypt's various soil conditions were tested to develop bacterial isolates that produced the antibiotic compound Corallopyronin A. Reversed phase HPLC was used to purify Myxopyronin A. The broth microdilution method and the paper disc diffusion assay determined the test antibiotic's minimum inhibitory concentration( MIC) and in vitro antibacterial activity. Moreover, in vivo antibacterial spectrum, adverse medication responses, and pharmacokinetics were found in phases 1/2 of randomized clinical studies involving humans and animal models. Results: Corallopyronin A was generated from the culture supernatant of the soil bacterial isolate Corallococcus coralloides M2, cultivated on a Casein yeast peptone( CYP) plate. The test antibiotic prevented the growth of several Gram-ve bacteria, including Escherichia coli, at MICs higher than 100 mcg/ ml; while blocking the development of many Gram +ve bacteria, with MICs ranging from 3 to 15 mcg/ ml. However, eukaryotic cells—such as those found in fungi and humans—were unaffected. A bactericidal consequence of the test antibiotic was detected in the inhibition of prokaryotic DNA-dependent RNA polymerase( RNLP). Conclusion: The synthesis of the bactericidal antibiotic Corallopyronin A from Corallococcus coralloides M2 isolated from different soil settings in Egypt intrigued the current investigation.

This study examines the role of using algorithmic HRM to make strategic decisions pertaining to HR activities in organizations. The study develops a scale to measure algorithmic HRM usage in its first phase, and in the second phase, it finds that algorithmic HRM having significant impact on the strategic HR decision making that helps and enables organization in creating the competitive advantage. Utilizing the author’s LinkedIn profile, 234 final participants considered for this research. Collected data analyzed by applying PLS SEM. It evaluates the mediation role of the HR strategic decision making, and the HR digital maturity as a moderator in seeing the impact of algorithmic HRM on the competitive advantage of the firm. The study finds a strong relationship between the algorithmic HRM usage and competitive advantage, a significant relationship between algorithmic HRM usage and the strategic HR decision making, and lastly, a significant relationship between strategic HR decision making and the competitive advantage. The moderating role of HR digital maturity was found to be insignificant in this research which paves the way for further research. This research, the model, and its findings contribute to the theory and implicate the practicality of algorithmic HRM. It's one of few papers that address the algorithmic HRM usage in the transitioning economy like Saudi Arabia.

The objective of this study was to correlate the binding of drugs on a very popular nanoparticulate polymeric matrix; PLGA nanoparticles with their main constitutional, electronic and physico-chemical descriptors. Gaussian Processes (GPs) was the artificial intelligence machine learning method that was utilized to fulfil this task. The method could successfully model the results where optimum values of the investigated descriptors of the loaded drugs were deduced. A percentage bias of 12.68 % ± 2.1 was obtained in predicting the binding energies of a group of test drugs. As a conclusion, GPs could successfully model the drugs-PLGA interactions associated with a good predicting power. The GPs-predicted binding energies (ΔG) can easily be projected to the drugs loading as was previously proven. Adopting the “Pharmaceutics Informatics” approach can save the pharmaceutical industry and the drug delivery scientists a lot of exerted resources, efforts and time.

Non-enzymatic glucose sensing is a crucial field of study because of the current market demand. This study proposes a novel design of glucose sensor with enhanced selectivity and sensitivity by using graphene Schottky diodes, which is composed of Graphene/Platinum Oxide/n-Silicon heterostructure. The sensor was tested with different glucose concentrations and interfering solutions to investigate its sensitivity and selectivity. Different structures of the device were studied by adjusting the platinum oxide film thickness to investigate its catalytic activity. It was found that the film thickness plays a significant role in the efficiency of glucose oxidation and hence in overall device sensitivity. Moreover, theoretical investigations were conducted using Density Function Theory (DFT) to better understand the detection method and the origins of selectivity. The working principle of the sensors puts it in a competitive position with other non-enzymatic glucose sensors. DFT calculations provided a qualitative explanation of the charges distributed across the graphene sheet within a system of a platinum substrate with D-glucose molecules above. The proposed graphene/PtO/n-Si heterostructure has proven to satisfy these factors, which opens the door for further developments of more reliable non-enzymatic glucometers for continuous glucose monitoring systems.

This paper investigates the influence of sample size and layer height on the elastic modulus of samples 3D printed by fused filament fabrication (FFF). Cubic samples of different sizes from either a stiff thermoplastic polymer (polycarbonate (PC)) or a soft polymer (thermoplastic polyurethane (TPU)) were printed at three different layer heights: 0.1 mm, 0.2 mm, and 0.4 mm. The samples were imaged using micro-computed tomography to visualize porosity and tested under compression. The results indicate that the elastic modulus of TPU varied with sample size, demonstrating size effects due to high porosity. In contrast, PC samples had a low void volume fraction and did not demonstrate statistically significant size effects on the elastic modulus. The variations in elastic modulus due to layer height were statistically significant for both materials. The highest elastic modulus was observed at 0.2 mm layer height for both materials across different sample sizes, which can be attributed to low void volume fractions. The study develops process-structure-property relations for PC and TPU samples manufactured by FFF. It provides new insights into the design guidelines for FFF based on the size effects. The results indicate that variations in mechanical properties due to size effects must be considered during the design stage for TPU to accurately predict the material’s behavior. Additionally, the locations of the printed parts that are subjected to higher loads should be printed closer to the heated print bed due to the lower void volume fraction observed in the section of the samples printed adjacent to the heated print bed.

Heat transfer enhancement and hydrodynamic characteristics of nanofluid use in a micro heat exchanger is investigated for cooling electronic components working in hot climatic conditions. The cooling fluid employed was water and TiO2 nanoparticles at concentrations of 1% and 5%, Reynolds numbers ranged from 400 to 2000, and inlet temperatures ranged between 35ºC and 65ºC. At a nanofluid inlet temperature of 55ºC and a nanoparticle concentration of 1%, the Nusselt number increased by 23% up to 54% as the Reynolds number varied between 400 and 2000. At a nanoparticle concentration of 5%, the percentages which correspondingly enhanced the Nusselt number were 32% and 63%. The temperature of the electronic heating component decreased by 4.6-5.2ºC when the nanofluid concentration was increased from 0 to 5% at a Reynolds number of 400 and a nanofluid inlet temperature of 35ºC. Small increments in pressure drop of about 6% and 13% were observed at nanofluid concentrations of 1% and 5%, respectively. With nanoparticle concentrations of 1% and 5%, a Reynolds number of 2000 and a nanofluid inlet temperature of 35ºC, performance evaluation criterion (PEC) values of 1.36 and 1.45 were obtained. When the nanofluid inlet temperature was increased to 65ºC, the PEC parameter decreased to 1.02-1.10 for both concentrations.

This initial report of a longitudinal study of 192 English hospital nurses has measured Nursing Values (the 6Cs of nursing); Personality, Self-Esteem and Depression; Burnout Potential; Work-Life Balance Stress; ‘Hardy Personality’; and Intention to Leave Nursing. Correlational, component and cluster analysis identifies four groups: “The Soldiers” (N = 79) , with medium scores on most measures, who bravely ‘soldier on’ in their nursing roles, in the face of numerous financial cuts to the National Health Service, and worsening nurse-patient ratios; “Cheerful Professionals” (N = 54), coping successfully with nursing roles, and a variety of challenges, in upwardly mobile careers; “High Achievers” (N = 39), senior nurses with strong profiles of a ‘hardy personality’, and commitment to fundamental nursing values; “Highly Stressed, Potential Leavers” (N = 20), with indicators of significant psychological distress, and difficulty in coping with nursing role challenges. We propose a model of co-counselling and social support for this distressed group, by nurses who are coping more successfully with multiple challenges. We discuss the role of nurse educators in fostering nursing values, and developing and supporting ‘hardy personality’ and emotional resilience in recruits to nursing. This study is framed within the disciplinary approach of Critical Realism, which identifies the value basis for research and dialogue in developing strategies for social change.

Nutrigenomics is the study of the interaction of nutrition and genes, focusing on the influence of nutrients on the genome, proteome, and metabolome, and how nutrition affects human health. In the context of nutrigenomics, bioactive components are dietary ingredients that may transmit information from the external environment and alter gene expression in the cell, and hence the overall function of the organism. It is critical to consider food not only as a source of energy and essential nutrients necessary for life and growth, but also as a factor impacting health/disease, biochemical processes, biochemical pathway activation and affecting the diversity of the gut microbiome. Antimicrobial resistance in pathogenic and commensal microorganisms has emerged as a major public health concern due to emerging antimicrobial resistance genes in E. coli isolates from pig, cattle, chicken, and turkey meat, against tetracycline, streptomycin, and sulfonamides. Also, Salmonella spp. and Campylobacter spp. have shown antibiotic resistance at farms and slaughterhouses, and in animal-based food products. A correlation has been proven between a critical nutrient-responsive signaling system and catabolite control of gene expression, and a two-component signaling system that drives antibiotic resistance in E. faecalis, revealing a previously unknown integration between the nutritional status of the cell and intrinsic antibiotic resistance. Moreover, different nutrigenomic approaches can be applied to mitigate possible emergence of antimicrobial resistance against novel antibiotics. However, little progress has been achieved in converting nutrigenomics information into clinical advice, so far.

This article is a continuity of prevouse two reserch in daylight harvastion control that were deigned using classical control apoproach and then fuzzy logic technique, In this article ANN controller is designed and its response is compared with the performance of the other two controllers. Detailed compression for the different error type is illustrated, however, the results show that the three controller operate with satisfactory accuracy.

Electronic text stylometry is a collection of forensics methods that analyze the writing styles of input electronic texts in order to extract information about authors of the input electronic texts. Such extracted information could be the identity of the authors, or aspects of the authors, such as their gender, age group, ethnicity, etc. This survey paper presents the following contributions: 1) A description of all stylometry problems in probability terms, under a unified notation. To the best of our knowledge, this is the most comprehensive definition to date. 2) A survey of key methods, with a particular attention to data representation (or feature extraction) methods. 3) An evaluation of 23,760 feature extraction methods, which is the most comprehensive evaluation of feature extraction methods in the literature of stylometry to date. The importance of this evaluation is two fold. First, identifying the relative effectiveness of the features (since, currently, many are not evaluated jointly; e.g. syntactic n-grams are not evaluated against k-skip n-grams, and so forth). Second, thanks to our generalizations, we could evaluate novel grams, such as what we name compound grams. 4) The release of our associated Python feature extraction library, namely Fextractor. Essentially, the library generalizes all existing n-gram based feature extraction methods under the "at least l-frequent, dir-directed, k-skipped n-grams'', and allows grams to be diversely defined, including definitions that are based on high-level grammatical aspects, such as POS tags, as well as lower-level ones, such as distribution of function words, word shapes, etc. This makes the library, by far, the most extensive in this domain to date. 5) The construction, evaluation, and release of the first dataset for Emirati social media text. This evaluation represents the first evaluation of author identification against Emirati social media texts. Interestingly, we find that, when using our models and feature extraction library (Fextractor), authors could be identified significantly more accurately than what is reported with similarly sized datasets. The dataset also contains sub-datasets that represent other languages (Dutch, English, Greek and Spanish), and our findings are consistent across them.

This article introduces new method using ANN to control SVC in order to correct the source power factor of low voltage network. Two ANN approaches are investigated to design accurate and fast power factor correction (PFC) controller. First approach uses simple ANN (SANNA). Second approach uses cascaded ANN (CANNA). ANN regression, performance and the calculated error for both approaches are investigated to select between the two approaches. CANNA is selected as a better solution and it used to build the ANN PFFC controller using database, generated by MATLAB-Simulink, for standard three low voltage levels (240V, 220V and 110V). Nine test cases are carried out to validate the performance of proposed ANN PFC controller with a network has variable loads and low power factor (0.6 approximately). In order to extend the use of the controller to other voltage levels not included in the training process of the cascaded ANN, only the SVC is resized. Another nine cases are carried out with the same loads using the same ANN controller, as it is, to test its performance with the extended voltage level range (415V, 230V and 120V). The results show accurate and fast response in all test cases.

Abstract. This article proposes new fuzzy controller to regulation the voltage, damp the oscillations and limit the overshoot behavior in single-machine infinite-bus power system. Two different independent MISO fuzzy controllers are designed. First controller, is voltage stabilizer and it composes of two adaptive fuzzy modules and proportional gain AVR. The voltage stabilizer is designed to regulate the terminal voltage, damp the voltage oscillation and limit the voltage overshoot to the industrial maximum allowable limit. The input signals of this stabilizer is are taken from the terminal voltage and the imposed voltage disturbance that can be read from any smart relay. The fuzzy output is used as feedback signal to control the AVR in order to achieve stabilized voltage equal to the reference voltage. The second fuzzy controller is designed with two input signals; “mechanical angle” and its derivative, and one output which is used as feedback signal to adapt the damping torque in order to damp the mechanical oscillation fast and with maximum overshoot not exceeding 10%, and hence damp the power angle oscillation that is important in the PSS improvement. MATLAB-SIMULINK was used for modelling and the test cases simulation. The results show very good performance for the proposed fuzzy controllers.

This paper attempts to compare two different approaches to solve the problem of accident rates prediction based on human factors for industrial workers. One of the methods has already been done using Fuzzy c-Means Clustering and proved to be working with decent results. The second method which will be covered in this paper is using Artificial Neural Networks. The primary goal of this work is to insure that ANN will work efficiently in such prediction problem. The second goal is to reveal the fact that which one of the two selected methodologies is better at defining the estimation of accident rates among people who work in different industrial fields. The purpose has been achieved when the outcome of the ANN was obtained and compared accordingly with the output of the research previously carried out with Fuzzy c-means clustering method. Comparing the outcomes of these two different methods gave an immense insight on which features are more important than others when it comes to laborers properties with completely different background such as varying levels of health, knowledge, experience, training and physical properties. At the end of the research, it becomes clear that accident rates estimation for laborers with properly trained Artificial Neural Network gives better results when it is compared with Fuzzy c-Means Clustering method. Standard deviation method was used to calculate the validity of ANN technique. The result was compared with Fuzzy c-mean clustering technique. Impressive improvement of 8.8% in the accident rate prediction was achieved using Tailored-Made-ANN.

Global temperature rise due to hydrocarbon gases emission that are produced by generating the electrical power has a great attention by the researchers to reduce it till zero emission is successfully achieved. Sustainable energy source such as solar energy, wind, hydro-energy and sea wave energy are focal areas to replace the fossil fuel by clean energy. In this article, daylight is used to minimize the power consumption that required for indoor lighting using electric roller blind. Smart controller is designed to adjust the position of the roller blind stepper motor, and hence, adjust the roller blind opening, based on the preset light intensity, to achieve precise utilization of daylight inside the room. If the desired Lux is not achieved for any reason, the smart controller adjusts the LED circuit current to boost the light intensity to achieve precisely the desired Lux. Comprehensive test cases using MATLAB-Simulink is carried out to verify the performance of the proposed smart controller. Techno-economic analysis is introduced to evaluate the benefits of installing the controller. Summary and recommendation are given at the end.

Gold nanoparticles are currently used for the treatment of cancer through a myriad of modalities and delivery approaches. Conjugation of tumor imaging Single Photon Emitting Computed Tomographic (SPECT) radiopharmaceutical to gold nanoparticles will allow systemic targeting and imaging of cancer tissues simultaneously. In this study, gold nanoparticles (AuNPs) were prepared using Epigallocatechingallate (EGCG), loaded with doxorubicin (Dox), and characterized before and after doxorubicin conjugation. Cytotoxicity of EGCG-AuNPs and Dox-EGCG-AuNPs were evaluated against breast carcinoma (MCF-7) and hepatocellular carcinoma (HepG-2) cell lines demonstrating high cytotoxic effects of Dox-EGCG-AuNPs against both cell lines. Doxorubicin was radiolabeled with ^99mTc and our new approach has optimized various labeling conditions resulting in a radiochemical yield of 93.5 ± 2.04%. Biodistribution of ^99mTc-Dox-EGCG-AuNPs was studied in normal and tumor bearing mice following I.V. and intratumoral injections at different time intervals. Results showed high uptake of the intravenously injected ^99mTc-Dox-EGCG-AuNPs in tumor tissue (22.45 %ID/g at 2 h). In addition, localized intratumoral injection of ^99mTc-Dox-EGCG-AuNPs showed extremely high levels of uptake in tumor (80.22 %ID/g at 15 min) with high retention for extended periods post injection. Our results present prospects for the utility of ^99mTc-Dox-EGCG-AuNPs as a multiplexed theranostic agent through SPECT imaging of tumor tissue and therapy through photothermal destruction of cancer tissue through the application of exogenous laser lights as well as through tyrosine phosphatases inhibitor (through EGCG), and topoisomerase II inhibitor (through doxorubicin) effects.

This paper is an extension to previous work that introduced successful classical-control for indoor lighting system that simultaneously control LED system and roller curtain to achieve accurate light intensity for indoor lighting applications. In this paper, Multi Input Multi Output Fuzzy Logic Controller (MIMO FLC) is proposed to replace the classical-controller. Detailed method is provided to illustrate the steps to design the required MIMO FLC that has two fuzzy input, two fuzzy output and forty-five fuzzy rules with mamdani fuzzy engine. The proposed MIMO FLC is simulated in Matlab using Simulink tools. The results are illustrated, analyzed and compared with the classical-control. The response showed very close performance to the classical-controller. The maximum average error and the maximum error with respect to “Desired Lux” inside the room is -6% and -10% respectively.

Background: Breast cancer and other neoplasms like acute lymphocytic leukemia pose a serious threat to public health worldwide. Treatment for malignancies including acute lymphocytic leukemia and breast cancer requires enzymes that break down L-glutamine. An amidohydrolase called L-glutaminase can be an effective chemotherapeutic tool for treating various cancers. Methods: On mineral L-glutamine agar selective medium (MGA), a few bacterial isolates were examined in the current investigation to see if they produced L-glutaminase. However, the most effective positive bacterial isolates generating L-glutaminase were identified using morphological and biochemical testing. Molecular detection using the direct Southern blotting approach was also used to determine the main positive isolate that produces L-glutaminase. L-glutaminase synthesis by bacteria was evaluated for its characteristics. Using an MTT test, the anticancer activity was evaluated. Results: exclusive bacterial isolates that used L-glutamine as their sole source of metabolic nitrogen exhibited favorable growth on MGA. PH 7.4 and a temperature of 37 0C were the ideal environmental and physiological conditions for developing positive bacterial isolates. From the soil samples taken from various soil conditions in Egypt, the morphological and biochemical analyses showed that Bacillus cereus 14579 was the main positive bacterial generating L-glutaminase isolate. At a pH of 7.4 and a temperature of 37 °C, the following activators—KCL, ZnSO4, FeSO4, K2HPO4, and MgSO4—provided the high-grade circumstances for characterizing L-glutaminase synthesis. Bacillus cereus-produced L-glutaminase has shown excellent bioavailability and effectiveness as an anticancer therapy. The yield [productivity] was 5.2 U/ml during the original manufacture from MGA, but it increased to 42.96 U/ ml by bacterial recombinant DNA manufacturing. The molecular mass of L-glutaminase was roughly 37 KDa. L-glutaminase was purified, yielding final enzyme recovery of 55 1.23%, total activity 12,990± 19.76 ( U), specific activity 384.66± 8.92( U/ mg of protein), and purification fold 2± 2.99. Furthermore, the L-glutaminase activity was raised by 19%, 23%, 15%, and 9%, respectively, by the enzymatic activators Mn2+, K+, Na+, and Fe3+. It demonstrated strong DPPH scavenging activity (IC50 = 61 μg/ mL) and anticancer activity( IC50 = 40.72, 9.7, 7.39, 20.61, 51.28, and 11.55 μg/ mL, respectively) against human liver (HepG-2), colon ( HCT-116), breast ( MCF-7), lung( A-549), lymphocytic( CCL-120), and cervical( Hela) cancer cell lines. A stronger affinity for its substrate was shown by the kinetic parameters of Km and Vmax, which were 13.2 10-5 M and 119.86 μmol/ ml/ min, respectively. Conclusion: Acute lymphocytic leukemia and breast cancer are examples of auxotrophic malignancies for which L-glutamine serves as the only metabolic source, and L-glutaminase generated by Bacillus cereus was an appropriate enzyme in the therapy of these diseases.

Fire hazards present a multifaceted global challenge that endangers human lives and environmental safety. Despite advancements in fire risk management technologies and methods, fires continue to be a prime concern for human security. The Arabian Gulf region, influenced by its climatic and environmental conditions, is especially susceptible to these threats. The Emirate of Sharjah, part of the United Arab Emirates, has made significant progress in reinforcing fire safety measures within residential structures, achieving a decrease in the number of fire-related accidents compared to neighboring Emirates. However, the incidence rate remains relatively high. This study undertook a thorough review and assessment of the existing Fire Management System (FMS) for Sharjah's residential sector, leading to the recommendation of a more robust framework. Through a series of literature reviews, interviews with stakeholders, and surveys, using analytical techniques such as the Delphi method and Failure Mode Effect and Criticality Analysis, vital factors that influence the FMS's effectiveness were pinpointed. The study exposed that the current FMS was largely reactive. In response, a proactive framework incorporating nine essential components was designed to strengthen the Sharjah FMS. These components span across various domains such as fire assurance, assessment of fire risks, management of accidents, evaluation of performance, training programs, research and development initiatives, digital services, monitoring of regulatory compliance, firefighting strategies, automated responses to fires, recovery processes, as well as the use of resilient materials and architectural design considerations. Furthermore, the research introduced two specific fire indexes, the HRBFI and the EFRI. Anchored in the principles of Systems Thinking and Industry 4.0, this proposed framework is aimed at streamlining Sharjah's approach to fire management in dwellings, with the objective of diminishing the frequency of fire incidents yearly. The ultimate aspiration of this framework is to enhance the Emirate's standing in terms of safety and to guarantee a living environment that is safeguarded against the risk of fires..

The design of highly efficient sensitizers is one of the most significant areas in dye-sensitized solar cell (DSSC) research. We have studied a series of benzothiadiazole-based D-π-π-A organic dyes, putting emphasis on the influence of the donor moiety on the DSSC’s efficiency. Using linear response time-dependent density functional theory (TDDFT) with the CAM-B3LYP functional different donor groups were characterized in terms of electronic absorption spectra and key photovoltaic parameters. As a reference a dye has been considered which has a benzothiadiazole fragment linked via thiophene rings to a diphenylamine donor and a cyanoacrylic acid acceptor. The different systems are first studied in terms of individual performance parameters, which are eventually aggregated into the power conversion efficiency. Here only the amino-substituted species shows a modest increase, whereas the dimethylamino case even shows a decrease.

Many historical areas are exposed to many problems and ongoing changes that may negatively affect those areas. One of these historical areas is Historic Jeddah in Saudi Arabia, which was placed on the UNESCO World Heritage List in 2014. This site is located within the scope of the second largest city in the Kingdom, which is witnessing a continuous urban movement in which the image of the city is changing in response to (Kingdom’s Vision 2030) to modernize the image of its major cities. The study aims to review the urban preservation strategies for historic Jeddah and the vision set for it through the ongoing modernization process of the city, especially with the projects that have been undertaken in it since 2021. The study follows both theoretical and descriptive approaches with the aim of reviewing current conservation strategies. This is with the aim of reaching results related to the challenges facing the area, demonstrating the effectiveness of the conservation strategies used, and deducing what could contribute in the future to the process of developing, preserving, and optimally exploiting it, without losing its value as a result of the modernization processes taking place now, but rather as a compatible part of it.

The concept of this prototype is to create a cold air film layer, in indoor side of the window. The function of this extra cold air layer is to increase the amount of window resistance and decrease its U-Value. It provide air film layer by using the same concept of desert cooler or wind catcher. They both bring the hot air from outside then let it go throw straw miost with cold water. After hot air move through straw, it would become cold, thus increase the window resistance and decrease the haet gian, therefore, decrease the cooling load. So, this window model works by heating the air in air room by sun radiation, then after a while, air pressure will rise and its volume will increase then it will impulse to wet hay, and become cold. Then there is fins to guide air flow to its correct direction, thus inner side of window will become cold, not like other type of window which when temperature rise, the inner side of window become hot. So, this window prevents heat transition and creare regenereted trubouland air flim in the inner side of the window. Using calculation to find air film characteristics and WINDOW7.7 software to calculate heat gain through window, shows that it is expected from this prototype to reduce heat gain by 6.85 % for double glazed clear window.

Effective waste elimination is critical for the success of construction projects. Although several studies have focused on various aspects of construction waste, limited efforts have investigated the dynamic effect of Making-Do (MD) practices on productivity, rework, defects, and materials wastage. From a lean construction perspective, this study aims to address MD waste using the Last Planner System (LPS) and BIM. First, the casual structure that can cause MD in construction projects was expressed in a casual loop diagram (CLD), and thematic analysis uncovered the strategies of LPS-BIM to eliminate MD identified by reviewing the literature. Secondly, twenty-five strategies from the LPS and BIM strategies to address MD using Structural Equation Modeling (SEM) were assessed. Subsequently, a system dynamics model (SDM) for investigating LPS-BIM strategies on MD decisions in a construction project was formulated based on the underlying causal loop diagrams and the mathematical relations among the variables. Finally, the model was applied to three projects, and simulations for four LPS-BIM scenarios were carried out. The findings show that dynamic interactions among diverse production planning and control factors are critical in evaluating MD impacts on a construction project. The results demonstrate that the LPS-BIM approach resulted in an average 43.8% reduction in the tasks performed with MD, 45.3% of constraints, 66.5% of construction waste, increasing 13.7% completion rate, and 29.3% cost reduction, demonstrating that LPS-BIM as a more efficient solution for MD mitigation and construction planning.

In recent years, the implementation of artificial intelligence (AI) in accounting has grown in many domains, including auditing. AI permits auditors to evaluate large data sets and rapidly identify discrepancies and sequences in audit. This means auditors can review all of a client's transactions via a low time and effort. This entails auditing firms investing heavily in technological infrastructure as well as training their human resources to use cutting-edge AI technologies. Thus, this research sought to investigate the impact of the use of AI techniques by Jordanian external auditors in fraud risk assessment, the moderating effect of auditor size. The descriptive analytical method was used by distributing 280 questionnaires electronically to auditors employed in auditing firms operating in Jordan, The result reveals that AI techniques are extremely beneficial in fraud risk assessment at all levels, and the relationship between the use of AI techniques and the assessment of fraud risk has improved as auditor size has increased.

Deep sky observation is a fascinating activity, but it requires favourable conditions in order to be fully appreciated. Complex equipment, light pollution around urban areas, lack of contextual information often prevents newcomers from making the most of their observations, restricting the field to a niche expert audience. In this paper, we show how combining the usage of smart telescopes with eXplainable Artificial Intelligence makes the practice of astronomy even more accessible and educative, and how it has been applied during outreach sessions In Luxembourg Greater Region.

This article discuss the estimation of electrical stresses input that is required to determine lifetime degradation of the HV cables installed within overhead transmission lines (OHTL’s). Abort from lightning effects, these electrical stresses are mainly generated due to repetitive switching operation of the transmission line that produces transient overvoltage (TOV) stress and high frequency stress. The transient overvoltage (TOV) due to switching-off the transmission line at the interface points between the cable and OHTL is estimated using artificial neural network (ANN). PSCAD software is used to build the transmission line model for 749 different case in order to build the required database for ANN training. Two different algorithm input to train ANN with one hidden layer and one output layer using different number of nodes are modeled in MATLAB. The results performance is continuously compared and evaluated till acceptable Regression is achieved to insure the error is less than +/-1.5%. The high frequency due to switching-on the transmission line is also recorded and analyzed. The results show that this new method is efficient, accurate and useful as there is no cable monitoring system is available for each HV cable installed within the transmission line.

This paper proposes a novel deterministic methodology for estimating the optimal sampling frequency (SF) of water quality monitoring systems. The proposed methodology is based on employing two-dimensional contaminant transport simulation models to determine the minimum SF considering all the potential changes in the boundary conditions of a water body. A two-dimensional contaminant transport simulation model (RMA4) was implemented to estimate the distribution patterns of the total dissolved solids (TDS) within the Al-Hammar Marsh in the southern part of Iraq for 30 cases of potential boundary conditions. Using geographical information system (GIS) tools, a spatiotemporal analysis approach was applied to the results of the RMA4 model to determine the minimum SF of the monitoring stations with an accuracy level of detectable change in TDS concentration (ALC) of 5%, 10% and 15%. The proposed methodology specified a minimum and maximum SF for each monitoring station (MS) that ranged between 12 and 33 times per year, respectively. Additionally, increasing the ALC to 10% and 15% increase the minimum SF for some MSs by approximately 18% and 21%, respectively. However, the proposed methodology includes all the potential values and cases of boundary conditions, which increases the certainty of monitoring the system and the efficiency of the SF schedule. Moreover, the proposed methodology can be effectively applied to all types of surface water resources.

Due to their wide range of uses in modern technology, nanomaterial’s of silver metallic (Ag-NPs) have engaged considerable concern, driving significant research with development efforts. This study focuses on investigating the antimicrobial properties of Ag-NPs, encompassing their production, characterization, and biological aspects. The eco-friendly extracellular biosynthetic method employed in this work utilized extracts from the marine fungus Aspergillus flavus MK4 as reducing agents for nanoparticle synthesis. Analyzing the colloidal Ag-NPs using UV-visible spectroscopy revealed a peak in absorbance at 460 nm, indicating the presence of plasmonic properties. The electrons imaging of internal structure (TEM) elucidated spherical shape of the Ag-NPs by 15 nm size. Testing against bacterial diversities (Gr-ve & Gr+ve) revealed potent antibacterial and antifungal efficacy. Cytotoxicity versus HepG-2 cell line was assessed using the MTT assay, and antioxidant properties were examined through the radical scavenging (DPPH) assay. In wise of their conceivable applications in the fields of antibacterial, anticancer, and wound-healing, the Ag-NPs that were synthesized exhibit promising features. With its powerful ability to synthesize silver nanoparticles (Ag-NP), Aspergillus flavus MK4 Aspergillus flavus MK4 can generate nanoparticles extensively characterized, demonstrating their antibacterial, antioxidant, anticancer, and wound-healing properties.

We investigated the radioclinical outcomes of naviculectomy and limited/tailored soft-tissue releases in a short series of ambulatory children with complex/intractable congenital vertical talus subsets namely neglected, multiple operated and recurrent patients. We postulated that this technique will yield satisfactory radioclinical outcomes and minimal complications because it avoids extensive surgical release/trauma that is otherwise classically recommended for complex congenital vertical talus (CVT). The cohort consisted of five -four boys, one girl- complex CVT children with neglected, multiple operated and/or recurrent subsets. Patients were included if manipulative casting techniques were deemed unlikely to produce a plantigrade foot. Patients underwent naviculectomy with variable on-demand limited soft tissue releases. Two patients had bilateral affection and two had a non-idiopathic aetiology. The mean age was 5.2 years (4 to 6.25) and mean follow-up was 2.3 years (1 to 3). We reported satisfactory outcomes as per foot posture, function, overall parent satisfaction including pain and radiography per lateral views of talar-axis-first metatarsal base angle on the short/intermediate term. Whereas manipulative casting is unlikely to yield lasting outcomes in ambulatory children with complex subsets of CVT, extensive surgical soft-tissue releases have unfavourable long-term complications. As a substitute, naviculectomy as a form of resection arthroplasty created a practical and affordable third way between manipulative casting with minimally invasive surgery and the extensive surgical soft tissue releases on the short/intermediate term.

Exotic plants are usually problematic for the native species where they coexist. This study evaluated the effect of naturalised alien Cenchrus echinatus L. on native plants in the urban vegetation. A field trial was conducted to assess the effect of this species on cover and diversity of the native vegetation. The allelopathic potential of such species was examined. Plots comprising C. echinatus had lower cover of some native species. Lower floristic diversity was observed at more dense cover of this plant. The soil under Cenchrus attained lower N, P and K contents. This soil had no effect on germination and growth of the native species. It also comprised germinable seeds of some species which were absent from the standing vegetation. Exotic C. echinatus may exert a negative effect on the native vegetation of the urban plant communities. Dense cover of Cenchrus may inhibit germination of native species, leading to reduction in their cover. The reduction in cover and diversity of native species was not attributed to allelopathy. These results suggest that naturalised C. echinatus may be more competitor than the native ones, particularly at higher densities. Furthermore, it may represent a threat for the native plants in the urban vegetation.

A milk drink flavored with dates syrup produced at a lab scale level was evaluated. The production process of date syrup involves a sequence of essential unit operations, commencing with the extraction, filtration, and concentration processes from two cultivars: Sukkary and Khlass. Date syrup was then mixed with cow’s and camel’s milk at four percentages to form a nutritious, natural, sweet, and energy milk drink. Sensory, physical, and chemical characteristics of the milk drinks flavored with date syrup were examined. The objective of this work was to measure physiochemical properties of dates fruits and milk drinks flavored with dates syrup, then to evaluate the physical properties of milk drinks utilizing a non-destructive NIR spectra. The study assessed the characteristics of the milk drink enhanced with date syrup by employing near-infrared spectra (NIR) spectra and analyzed utilizing partial least-square regression (PLSR) and artificial neural network (ANN) analysis. The NIR spectrum proved to be highly effective in estimating the physiochemical attributes of the flavored milk drink. The ANN model outperformed the PLSR model in this context. RMSECV is considered a more reliable indicator of a model's future predictive performance compared to RMSEC, R2 ranged between 0.946 and 0.989. Consequently, non-destructive NIR technology demonstrates significant promise for accurately predicting and contributing to the entire production process of the product's properties examined.

There is a need to develop enriched milk drinks with healthy and natural additives. A consumer test was conducted to compare milk (cow and camel) flavored with date syrup (Khlass and Sukkary varieties) at different percentage. The objective of the present work was to study consumers liking patterns for flavored milk drinks from dates syrup (from Khlass and Sukkary dates), at different percentages, added to milk (cow and camel) utilizing preference mapping analysis. A total of sixteen trained panelists took part in the test. The obtained data were used to develop an internal preference map for these samples. Principal component analysis (PCA) and Agglomerative hierarchical clustering (AHC) algorithms were used to construct the preference map. The first component signifies overall acceptance of taste and color, while the second focuses on texture and flavor. Consumers were grouped into five clusters based on preferences. Cluster two favored both components positively, while cluster four leaned negatively on both. A factorial ANOVA was performed and the results showed a significant effect of the main factors as well as the interactions. Panelists preferred cow's milk over Camel’s milk in all aspects. For taste, cow’s milk with 20% Khlass syrup or 10% Sukkary syrup was favored, while in flavor, it was cow’s milk with 5% Khlass syrup and Camel’s milk with 10% Sukkary syrup. Texture-wise, Camel’s milk with 5% Khlass syrup and 15% Sukkary syrup, along with cow’s milk with 10% Khlass syrup, received top marks. In color evaluation, cow’s milk with 15% Sukkary syrup was the preferred choice. Finally, for overall color score, cow’s milk with 10% Sukkary syrup led, followed by cow’s milk with 5% Sukkary syrup. This research suggests that dairy companies may have more impact if they use date syrup as a natural and healthy flavor. The preference map includes two main dimensions; the first represents overall acceptance, taste, and color while the second is related to flavor and texture attributes. The preference map can be used in product optimization and development.

As the Autonomous Vehicle (AV) industry is rapidly advancing, classification of non-motorized (vulnerable) road users (VRUs) becomes essential to ensure their safety and to smooth operation of road applications. The typical practice of non-motorized road users’ classification usually takes numerous training time and ignores the temporal evolution and behavior of the signal. In this research effort, we attempt to detect VRUs with high accuracy be proposing a novel framework that includes using Deep Transfer Learning, which saves training time and cost, to classify images constructed from Recurrence Quantification Analysis (RQA) that reflect the temporal dynamics and behavior of the signal. Recurrence Plots (RPs) were constructed from low-power smartphone sensors without using GPS data. The resulted RPs were used as inputs for different pre-trained Convolutional Neural Network (CNN) classifiers including constructing 227×227 images to be used for AlexNet and SqueezeNet; and constructing 224×224 images to be used for VGG16 and VGG19. Results show that the classification accuracy of Convolutional Neural Network Transfer Learning (CNN-TL) reaches 98.70%, 98.62%, 98.71%, and 98.71% for AlexNet, SqueezeNet, VGG16, and VGG19, respectively. The results of the proposed framework outperform other results in the literature (to the best of our knowledge) and show that using CNN-TL is promising for VRUs classification. Because of its relative straightforwardness, ability to be generalized and transferred, and potential high accuracy, we anticipate that this framework might be able to solve various problems related to signal classification.

Choosing the optimal location for a city based on sound environmental geomorphology planning is of the utmost importance to achieving environmental sustainability, as it can spare the State and other decision-making entities a great deal of stress in the long run. GIS offers great potential for environmental planners to choose the most appropriate places for the cities of the future, especially when coupled with environmental geomorphological analyses. The State of Kuwait seeks sustainable development through the implementation of clear and specific urban plans, some of which suffer from a severe lack of geomorphological and spatially based environmental planning. This study aims to: 1) Conduct suitability modelling for establishing new cities in Kuwait, 2) Assess the current 2005-2030 urban plan, and 3) Propose possible recommendations and solutions for potential urban problems. The study relies on integrating several methods to devise a framework that will aid researchers and decision-makers in selecting optimal locations for built structures based on analysis and modelling (e.g., digital elevation model, geologic mapping, geomorphology, natural hazards, heritage/archaeological sites, military areas, oil fields, soils). Using this methodology in choosing city sites contributes to achieving sustainable development, reducing city problems, saving countries’ budgets, and saving lives. Results from this study enhance understanding of how environmental geomorphology, when combined with GIS, can be harnessed to achieve sustainable urban development in the Arabian Gulf countries and other desert countries.

Background: The current review was conducted to determine the effectiveness of atenolol on all-cause mortality rate among Asian patients with chronic progressive diseases, mainly diabetes mellitus, primary hypertension, and coronary artery disease. Methods: We searched the COCHRANE, MEDLINE, TRIP, and EMBASE databases for published articles up to 31 March 2023. Studies that compared all-cause mortality rates among Asian patients who were on atenolol or other medications were included. Results: The review included 79603 Asian patients from three cohort studies. Out of the studied patients, 36046 were atenolol users and 43557 were non-atenolol users. The review revealed that atenolol users recorded lower all-cause mortality rates compared to non-users with a significant difference (OR= 0.57, CI= 0.44-0.75, P<0.001). The pooled estimate of the all-cause mortality rate was also lower among atenolol users (7.02%) compared to metoprolol tartrate users (13.15%) with a significant difference (OR= 0.50, CI= 0.47-0.53, p < 0.0001). Although the included studies were categorized as having a low risk of bias for most of the studied domains, significant heterogeneity was recorded across these studies (I2 =88%, P=0.001). Conclusion: This review found that atenolol when compared to a control or metoprolol tartrate, has a significant effect in reducing the all-cause mortality rate among Asian patients with chronic progressive disease.

The purpose of this paper is to explore the impact on corporate social responsibility when Jordanian banks disclose risks. The main objective of the study is to investigate the relationship between risk disclosure and corporate social responsibility in the banking sector in Jordan. To achieve this goal, data was collected from 23 Jordanian banks listed on the Amman Stock Exchange (ASE) over a period of 10 years, from 2010 to 2019. The data was analyzed using a regression model with four independent variables that represent the risk disclosure; corporate social responsibility was used as the dependent variable. The study also built in controls for the age of each bank, its size, leverage, and ROE, to ensure that the results were not affected by these factors. The results of the study show that all independent variables are positively correlated with corporate social responsibility. This suggests that disclosing risks is an effective way to improve corporate social responsibility in the banking industry. The findings of this study have important practical implications for bank managers, future researchers, and policymakers. The study also highlights the importance of future research in this field in order to understand the relationship between risk disclosure and corporate social responsibility in other countries and within other sectors of industry.

In Nigeria, desertification has become one of the most pronounced ecological disasters, with the impacts mostly affecting eleven frontline States. This has been attributed to a range of both nat-ural and man-made factors. This study applied a remote sensing-based change detection and indicator analysis to explore land use/land cover changes and detect major conversions from ecologically active land covers to sand dunes. Results indicate that areas covered by sand dunes (a major indicator of desertification) have doubled over the 25 years under consideration (1990 to 2015). Although about 0.71 km2 of dunes have been converted to vegetation, indicative of the success of various international, national, local, and individual afforestation efforts, conversely about 10.1 km2 of vegetation were converted to sand dunes, implying around 14 times more de-forestation compared to afforestation. Juxtaposing the progression of sand dune with climate records of the study area and examining the relationship between indicators of climate change and desertification suggested a mismatch between both processes as increasing rainfall and lower temperatures observed in 1994, 2005, 2012, and 2014 did not translated into positive feedbacks for desertification in the study area. On average, our results reveal that sand dune is progressing at a mean annual rate of about 15.2 km2 in the study area. Based on this study’s land cover change, trend and conversion assessment, visual reconciliation of climate records with land cover data, statistical analysis, observations from ground-truthing, as well as previous literature, it can be inferred that desertification in Nigeria is less a function of climate change, but more a product of human activities driven by poverty, population growth and failed government policies. Further projections by this study also reveal a high probability of more farmlands being converted to sand dunes by the year 2030 and 2045 if current practices prevail.

Background: Asthma is a widespread chronic respiratory disease that poses a significant public health challenge. The current study investigated the associations between air pollution and asthma severity among individuals residing near the Sohar industrial port (SIP) in Oman. Despite the presence of multiple major industrial complexes in Oman, limited knowledge regarding their impact on respiratory health is accredited. Hence, the primary objective of this study is to offer valuable insights into the respiratory health consequences of industrial air pollution in Al Batinah North. Methods: The state health clinics' records for patient visits related to asthma were collected for the timeframe spanning 2014 to 2022. Exposure was defined as the distance from SIP, Majan Industerial Area (MIA) and Sohar Industerial Zone (SIZ) to determine high, intermediate, and low exposure zones (12 km, respectively). Exposure effect modifications by age, gender, and smoking status were also examined. Results: The conducted cross-sectional study of 410 patients (46.1% males and 53.9% females) living in over 17 areas around SIP revealed that 73.2% of asthmatics were under 50 years old, with severity significantly associated with closeness to the port. Risk ratios were estimated to be (RR:2.42; CI95%: 1.01–5.78), (RR:1.91; CI95%: 1.01–3.6), and (RR:1.68; CI95%: 0.92–3.09) for SIP, MIP and SIZ areas, respectively, compared to the control area. Falaj Al Qabail (6.4 km) and Majees (6 km) had the highest number of asthma patients (N. 69 and N. 72), and highest percentages of severe asthma cases among these patients (28% and 24%) with significant risk ratios (RR:2.97; CI95%: 1.19–7.45 and RR:2.55; CI95%: 1.00–6.48), correspondingly. Moreover, severe asthma prevalence peaked in the 25-50 age group (RR:2.05; CI95%: 1.26–3.33), and this linkage between asthma and age was much more pronounced in males than females. Smoking and exposure to certain contaminant (dust and smoke) increased also the risk of severe asthma symptoms, but their effects were less important in the high risk zone, suggesting much more important risk factor. A neural network model accurately predicted asthma risk (94.8% accuracy), with proximity to Sohar Industrial Port as the most influential predictor. Conclusion: The study highlights the High asthma burden near Sohar Industrial Port, linked to port proximity and smoking and wind direction as major risk factors. These findings inform vital public health policies to reduce air pollution and improve respiratory health in the region, prompting national policy review.

The present paper presents findings from the follow-up of 185 of these nurses who had been involved in the front-line care of COVID-19 patients in urban centres in Northern England, during and after the “second wave” of COVID patients in November, 2020. Measures of adjustment, stress (including PTSD), and Maslowian self-actualization were added to earlier measures of personality, adjustment, work-life stress, and career intention. Cluster analysis identified three types in the 2020-2023 cohort: I ‘Actualizing Professionals’; (N=62); II ‘Strong Professionals’ (N=56); III ‘Highly Stressed Nurses’ (N=45). These latter very stressed nurses included all nurses (N=16) identified as having PTSD symptoms.

Purpose: This study aimed to describe the molecular epidemiology and seasonality of human rhinovirus (HRV) in chronic obstructive pulmonary disease (COPD) and its association with COPD exacerbations in Abu Dhabi, the United Arab Emirates (UAE). Methods: Sputum specimens were collected for analysis from all COPD patients who visited a medical center from November 2021 to October 2022. The real-time quantitative polymerase chain reaction (qPCR) test was used to detect HRV. Results: Of the 78 COPD patients included in the study, 58 (74%) pa-tients presented with one or more exacerbation episodes. The incidence of COPD exacerbation peaked over the winter and substantially decreased during the summer. HRV positivity in pa-tients during exacerbation (E1) was 11/58 (19%) and 15/58 (26%) two weeks after the exacerbation episode (E2). There was no significant difference in the HRV load in these patients. No statistically significant difference was observed in the detection of HRV during exacerbation compared to patients with stable COPD. Conclusion: This is the first study to assess the association between HRV detection by qPCR and COPD exacerbations in the UAE. The high sensitivity of the detec-tion technology helped collect reliable epidemiologic data. Few studies have provided similar Middle East data. This study's pattern of COPD exacerbations and HRV detection parallels that of temperate countries. This information can help with future, more extensive surveillance of res-piratory viruses in the UAE and the Middle East and their association with COPD exacerbations.

The State of Kuwait seeks sustainable development through implementation of clear and specific urban plans, some of which suffer from a severe lack of geomorphological and spatially-based environmental planning, such as the use of geographic information systems (GIS). Choosing the optimal location for a city based on sound environmental planning is of the utmost importance to achieving environmental sustainability, as it can spare the State and other decision-making entities a great deal of stress in the long run. GIS, in particular, offers great potential for the environmental planner and decision-maker to choose the most appropriate places for the cities of the future, especially when coupled with geomorphological analyses. To achieve the Vision of Kuwait 2035, one of the State’s planning objectives focuses on Urban Planning for the Establishment of Environmental Cities that Achieve (UPEECA) environmental sustainability criteria. To gain a more holistic analysis related to the Vision, this study aims to: 1) Conduct suitability modelling for establishing new cities in Kuwait, 2) Assess the current 2005-2030 urban plan, and 3) Propose possible recommendations and solutions for potential urban problems. The study relies on integrating several methods to devise a framework that will aid researchers and decision-makers in selecting optimal locations for built structures based on analysis and modelling (e.g., digital elevation model, geologic mapping, geomorphology, natural hazards, heritage/archaeological sites, military areas, oil fields, soils)

A comparative efficacy of apathogenic genotype I (V4) and lentogenic genotype II (LaSota) strains of live Newcastle disease virus (NDV) vaccines was done following vaccination with pathogen-associated molecular pattern (PAMP) H9N2 avian influenza vaccine and challenge with velogenic NDV genotype VII.1.1 (vNDV-VII.1.1). Eight groups (Gs) of day-old chicks were used (n=25). Groups 1-4 received a single dose of PAMP-H9N2 subcutaneously, while Gs (1, 5) and (2, 6) received eye drops of V4 and LaSota respectively as twice doses. All Gs except 4 and 8 were intramuscularly challenged with vNDV-VII.1.1 at 28th days of age. No signs were detected in Gs 1, 5, 4, and 8. The mortality rates were 0% in Gs 1, 4, 5, and 8; 40% in G2; 46.66% in G6; and 100% in Gs 3 and 7. Lesions were recorded as minimal in Gs 1 and 5, but mild to moderate in Gs 2 and 6. The lowest significant viral shedding was detected in Gs 1, 2, and 5. In conclusion, two successive vaccinations of broilers with a live V4 NDV vaccine provided a higher protection against vNDV-VII.1.1 challenge than LaSota. Besides, PAMP-H9N2 with live NDV vaccines induced more protection than live vaccine alone.

The objective of this research was to explore the impact of a gradual replacement of Ca2+ with Mn1+ on the crystal structure of CaHPO4·2H2O, which could be beneficial for producing Ca1−xMnxHPO4·nH2O compounds. In order to prepare the starting solutions required for this study, Ca(NO3) 2·4H2O, (NH4)·2HPO4, and MnNO3·4H2O were used at various molar concentrations. The findings reveal that Mn substitutes Ca partly at low Mn/Ca molar ratios, and Mn doping reduces the unit cell of CaHPO4·2H2O. The produced biphasic compound was composed of monoclinic CaHPO4·2H2O and triclinic/monoclinic nanostructured Mn3PO4O11 after a continuous increase in the Mn/Ca molar ratio to 1. When the Ca/Mn molar ratio is 1.5, a triphasic compound of monoclinic CaHPO4·2H2O, triclinic Mn3P4O11, and Orthorhombic MnHPO4·(H2O)3 phases is formed. The formation of the monophasic MnHPO4·(H2O)3 compound was achieved by increasing the Mn/Ca molar ratio above 4. By adjusting the Mn/Ca molar ratio in the initial solutions, it is possible to produce biomaterials with specific and bespoke characteristics in the future. The Mn/Ca ratio of the starting solution can be modified to produce Ca1-xMnxHPO4-nH2O phases with weight percent compositions, as established. For the first time, Ca1−xMnxHPO4·nH2O compounds were synthesized using novel methods in this manuscript.

Background: Early identification and prevention of hypoxic ischemic encephalopathy (HIE) may reduce neonatal mortality and morbidity. Objective: We aimed to correlate between urinary Activin-A and MRI (conventional and Diffusion-weighted) and the severity of HIE in full-term neonates. Methods: Forty-five full-term neonates with HIE admitted to NICU and 15 normal neonates were enrolled into the study. The concentration of urinary Activin-A was determined using enzyme immunoassay kits and MRI were done. Correlations between urinary Activin-A and MRI with the degree of HIE were done. Results: Urinary Activin-A levels were significantly higher in neonates with HIE than controls (P<0.001). It was positively correlated with the clinical grading of HIE and a cutoff value of 0.08µg/l on day-1 after birth had a sensitivity of 98.6% and specificity of 97.1% for prediction of HIE. DW-MRI detected HIE with a high sensitivity (85%) compared to the low sensitivity of conventional MRI (35%). An ADC value of ≤ 0.8 was the best sensitivity-specificity cutoff point for detecting severe ischemic injury. DW-MRI imaging was positively correlated with Urinary Activin-A and both of them were positively correlated with the clinical grades of HIE (P < 0.001). Conclusions: DW-MRI imaging is correlated well with urinary Activin-A in full-term neonates with HIE and both of them are correlated with the degree of HIE. Early determination of urinary Activin-A combined with DW-MRI imaging can early detect HIE and its severity in full-term neonates with HIE.

For bounded unit interval, we propose a new Kumaraswamy generalized (G) family of distributions from a new generator which could be an alternate to the Kumaraswamy-G family proposed earlier by Cordeiro and de-Castro in 2011. This new generator can also be used to develop alternate G-classes such as beta-G, McDonald-G, Topp-Leone-G, Marshall-Olkin-G and Transmuted-G for bounded unit interval. Some mathematical properties of this new family are obtained and maximum likelihood method is used for estimating the family parameters. We investigate the properties of one special model called a new Kumaraswamy-Weibull (NKwW) distribution. Parameter estimation is dealt and maximum likelihood estimators are assessed through simulation study. Two real life data sets are analyzed to illustrate the importance and flexibility of this distribution. In fact, this model outperforms some generalized Weibull models such as the Kumaraswamy-Weibull, McDonald-Weibull, beta-Weibull, exponentiated-generalized Weibull, gamma-Weibull, odd log-logistic-Weibull, Marshall-Olkin-Weibull, transmuted-Weibull, exponentiated-Weibull and Weibull distributions when applied to these data sets. The bivariate extension of the family is proposed and the estimation of parameters is given. The usefulness of the bivariate NKwW model is illustrated empirically by means of a real-life data set.

The Dubai Digital Government launched its recent guidelines, which call for artificial intelligence systems to be subject to legal accountability. This study discusses the extent to which autonomous robots can be granted legal personality in UAE law and the consistency of this approach with the provisions of Islamic jurisprudence. This research paper answered two main questions: First, the extent to which these guidelines are considered the beginning of work on granting legal personality to AI systems in the UAE. Second, what form of legal personality can be given to autonomous robots in UAE law to be consistent with the provisions of Islamic jurisprudence as a primary source of legislation in the country? The research concluded the impossibility of considering autonomous robots as a "thing" and classifying them within the concept of "persons." It also concluded that it is possible to give them legal personality according to two legislative solutions: granting them partial or incomplete performance eligibility like minors.

Soil and Water Assessment Tool (SWAT) was used to simulate five glacierized river basins that are global in coverage and vary in climate. The river basins included the Narayani (Nepal), Vakhsh (Central Asia), Rhone (Switzerland), Mendoza (Central Andes, Argentina), and Central Dry Andes (Chile) with a total area of 85,000 km2. A modified SWAT snow algorithm was applied in order to consider spatial variation of associated snow melt /accumulation by elevation band across each subbasin. In the previous studies, melt rates varied as a function of elevation resulting from an air temperature gradient while the snow parameters were constant throughout the entire basin. A major improvement of the new snow algorithm is separating the glaciers from seasonal snow based on their characteristics. Two SWAT snow algorithms were evaluated in simulation of monthly runoff from glaciered watershed: 1) the snow parameters are lumped (i.e. constant throughout the entire basin) and 2) the snow parameters are spatially variable based on elevation band-subbasin (i.e. modified snow algorithm). Applying the distributed SWAT snow algorithm improved the model performance in simulation of monthly runoff with snow-glacial regime, so that mean RSR decreased to 0.49 from 0.55 and NSE increased to 0.75 from 0.69. Improvement of model performance was negligible in simulation of monthly runoff from the basins with monsoon runoff regime.

Extensive genome structure variation, such as copy number variations (CNVs) and presence/absence variations, is the basis for the remarkable maize genetic diversity; however, the effect of CNVs on maize herbivory defense remains largely underexplored. Here, we report that the naturally occurring duplication of the maize 9-lipoxygenase gene, ZmLOX5, leads to increased resistance of maize to herbivory by fall armyworms (FAW). Previously, we showed that ZmLOX5-derived oxylipins are required for defense against chewing insect herbivores and identified several inbred lines, including Yu796, that contained duplicated CNVs of ZmLOX5, referred to as Yu796-2×LOX5. To test whether introgression of the Yu796-2×LOX5 locus into the herbivore-susceptible B73 background that contains a single ZmLOX5 gene is a feasible approach to increase resistance, we generated a series of near-isogenic lines that contained either 2, 1 or 0 copies of the Yu796-2×LOX5 locus in the B73 background by six back crosses (BC6). Droplet digital PCR (ddPCR) confirmed the successful introgression of the Yu796-2×LOX5 locus in B73. The resulting B73-2×LOX5 inbred line displayed increased resistance against FAW associated with increased expression of ZmLOX5, increased wound-induced production of its primary oxylipin product, the α-ketol, 9-hydroxy-10-oxo-12(Z),15(Z)-octadecadienoic acid (9,10-KODA), and the downstream defense hormones regulated by this molecule, 12-oxo-phytodienoic acid (12-OPDA) and abscisic acid (ABA). Surprisingly, wound-induced JA-Ile production was not increased in B73-2×LOX5, resulting from the increased JA catabolism. Furthermore, B73-2×LOX5 displayed enhanced drought tolerance likely due to increased ABA and 12-OPDA content. Taken together, this study revealed that the duplicated CNV of ZmLOX5 quantitively contributes to maize antiherbivore defense and presents proof-of-concept evidence that the introgression of naturally occurring duplicated CNVs of a defensive gene into the productive, but susceptible, crop varieties is a feasible breeding approach for enhancing plant resistance to herbivory and tolerance to abiotic stress.

Recently, there has been a growing interest in the production of electricity from renewable energy sources (RES). The RES investment is characterized by uncertainty, which is long-term, costly, depend on feed-in-tariff and support schemes. In this paper, we address the real option valuation (ROV) of a solar power plant investment. The real option framework is investigated. This framework considers the renewable certificate price, furthermore the cost of delay between establishing and operating the solar power plant. The optimal time of launching the project and assess the value of deferred option are discussed. The new three stage numerical methods are constructed, the Lobatto3C-Milstein (L3CM) methods. The numerical methods are integrated with concept of Black-Scholes option pricing theory, and applied in option valuation for solar energy investment with uncertainty. The numerical results of L3CM, finite difference and Monte Carlo methods are compared to show the efficiency of our methods. Our data set refers to the Arab Republic of Egypt.

This study examines the relationship between firm-level and macroeconomic variables and stock prices (SP) in Iran, Saudi Arabia (KSA), and Iraq, where economic conditions are uncertain. The sample consists of all firms listed on these countries' stock exchanges between 2015 and 2019, yielding a comprehensive dataset from 154 Iranian firms, 82 KSA firms, and 33 Iraqi firms. Using a fixed effect model, intriguing relationships are uncovered between firm-level and macroeconomic factors on SP. The findings indicate that, at a 1% significance level, there is a strong link between Iran and Iraq's GDP and their respective SP. In KSA, the association between GDP and SP is positive and significant at a 5% level. In addition, there is a positive and statistically significant correlation between the inflation rate and SP in all three countries. Moreover, the association between exchange rates and SP is significant and positive in KSA and Iraq but negative and significant at the 1% significance level in Iran. Furthermore, in KSA, the connection between oil prices and SP is positive and significant, whereas, in Iran, the relationship is negative at the 1% level. Surprisingly, there is no association between the price of oil and Iraqi SP. Regarding intangible assets, their impact on SP in Iran and KSA is negligible. In Iraq, however, there is a negative and significant relationship at the 5% level, indicating that intangible assets have a detrimental impact on SP. These findings highlight the complex link among macroeconomic factors, intangible assets, and SP in the examined countries. Policymakers and governments should prioritize implementing measures to foster sustainable economic growth, manage inflation, and stabilize exchange rates. These actions can boost investor confidence and contribute to the stock market's overall development.

This research aims to explore the complex interplay between supply chain resilience (SCR), digital supply chain (DSC), and sustainability, focusing on the moderating influence of supply chain dynamism. The goal is to understand how these elements interact within the framework of contemporary supply chain management and how they collectively contribute to enhancing sustainability outcomes. The sample size is 300 CEOs and managers. The study approach integrates quantitative research methods. Structural equation modeling (SEM) is utilized to quantitatively analyze the direct and indirect effects of SCR and DSC on sustainability. The numerous surveys we conduct among supply chain ecosystem stakeholders provide a rich picture of practical implications and contextual nuances. In sum, our early findings generally support a positive relationship between SCR and sustainability in and of itself decrying the need for more resilient supply networks for sustainability. We further find the beneficial impact of digital technologies in promoting sustainability via enhancing environmental control and controlling for efficiency in supply chains. We also offer evidence to show that supply chain dynamism compounds the positive logic between SCR and DSC and sustainability. As a final word, it must be noted that our work speaks to the burgeoning Supply Chain Dynamism as moderator literature by examining the direct and contingent effects of SCR and DSC on not only performance but sustainability. By shedding light on the moderating role of dynamism, the study provides fresh insights into the multifaceted nature of supply chain management and sustainability practices. The study's findings enhance theoretical understanding by elucidating the synergistic effects of SCR, DSC, and sustainability in dynamic supply chain settings. It augments existing theoretical frameworks by integrating concepts of resilience, digitalization, and sustainability into a comprehensive model. Practical and economical, the research offers actionable guidance for organizations aiming to improve sustainability performance through resilient and digitally advanced supply chains. By acknowledging the role of supply chain dynamism, managers can tailor strategies to manage disruptions effectively and leverage digital innovations. Economically, adopting sustainable practices can result in cost savings and competitive advantages. The research emphasizes the importance of aligning supply chain strategies with sustainability goals to drive long-term value and societal impact.

Soil-borne Trichoderma spp. have been extensively studied for their biocontrol activities against pathogens and growth promotion ability with plants. However, the beneficial effect of Trichoderma on inducing resistance against insect herbivores has been considered only recently. Among diverse Trichoderma species, consistent with previous reports, we showed that root colonization by T. virens triggered induced systemic resistance (ISR) to leaf-infecting fungal pathogens. Whether T. virens induces ISR to insect pests has not been tested before. In this study, we investigated whether T. virens affects jasmonic acid (JA) biosynthesis and defense against fall armyworm (FAW) and western corn rootworm (WCR). Unexpectedly, the results showed that T. virens colonization of maize seedlings grown in autoclaved soil suppressed wound-induced production of JA, resulting in reduced resistance to FAW. Similarly, the bacterial endophyte Pseudomonas chlororaphis 30-84 suppressed systemic resistance to FAW due to reduced JA. Further comparative analyses of the systemic effects of these endophytes when applied into sterile or non-sterile field soil showed that both T. virens and P. chlororaphis 30-84 triggered ISR against hemibiotrophic fungal pathogen Colletotrichum graminicola in both soil conditions, but only suppressed resistance to FAW in sterile soil. In contrast to the effect on FAW defense, T. virens colonization of maize roots suppressed WCR larvae survival and weight gain. This is the first report suggesting the potential role of T. virens as a biocontrol agent against WCR.

Mycoviruses are widespread across the major taxa of fungi including yeasts. Mycoviruses in the yeast fungus Geotrichum candidum are not well studied with three G. candidum-associated viral species characterized to date, all of which belong to the Totiviridae genus Totivirus. In this study, we report the molecular characteristics of another two totiviruses co-infecting isolate Gc6 of G. candidum. The two totiviruses were tentatively named Geotrichum candidum totivirus 2 (GcTV2-Gc6) and GcTV4-Gc6). Both viruses have typical genome organization of totiviruses comprising two ORFs encoding capsid protein (CP) and RNA-dependent RNA polymerase (RdRp) at the N and C termini, respectively. Genomes of GcTV2-Gc6 and GcTV4-Gc6 are 4592 and 4530 bp long, respectively. Both viruses contain the -1 frameshifting elements and their proteins could be expressed as a single fusion protein. GcTV2-Gc6 is closely related to a totivirus isolated from the same host whereas GcTV4-Gc6 is related to insect-associated totiviruses. The phylogenetic analysis indicated that GcTV2-Gc6 and GcTV4-Gc6 belong to two different sister clades, I-A and I-B, respectively. It is interesting that all viruses identified from G. candidum belong to the genus Totivirus. It is possible that the RNA interference (RNAi) mechanism is not active to suppress totivirus accumulation in isolate Gc6.

This research aims to identify the role of the Dyson model for strategic development in achieving strategic success, and the starting point of the research was the following main question: What is the role of the Dyson model in achieving success?The research was applied in the field in the departments of the Baghdad Municipality, where the examination list was relied upon, which included a set of questions that the senior and middle leaders in the Baghdad Municipality answered, and it was the main means by which the information related to the field of research was collected, and the checklist included two variables and three dimensions From each variable, as each dimension included four questions that express indicators that revolve around one of the research hypotheses, and the case study methodology was used, which defined its path and steps, collected and analyzed field data, and linked it to its theoretical framework, in order to reach To achieve the goal of completing this research, and through analyzing, interpreting and discussing the results, the most important results were drawn up: It was found that the principle of motivation within the departments of Baghdad Municipality does not exist and this affects the employees who do not receive it from the higher leaders in their departments, and this shows that the leaderships in The Municipality of Baghdad do not have the skills and experience. Baghdad Municipality seeks to work alone and not to involve employees who have experiences and skills and strive to achieve development in their departments, and this is what the community members expressed. Among them and poor business completion in their departments.

Muscle-enriched A-type lamin-interacting protein (MLIP) is an emerging protein involved in cellular homeostasis and stress adaptation. Eukaryotic cells regulate various cellular processes, including metabolism, DNA repair, and cell cycle progression, to maintain cellular homeostasis. Disruptions in this homeostasis can lead to diseases such as cancer, characterized by uncontrolled cell growth and division. This review aims to explore for the first time the unique role MLIP may play in cancer development and progression, given its interactions with the PI3K/Akt/mTOR pathway, p53, and FOXO transcription factors, all critical regulators of cellular homeostasis and tumor suppression. We discuss the current understanding of MLIP's involvement in pro-survival pathways and its potential implications in cancer cells' metabolic remodeling and dysregulated homeostasis. Additionally, we examine the potential of MLIP as a novel therapeutic target for cancer treatment. This review aims to shed light on MLIP's potential impact on cancer biology and contribute to developing innovative therapeutic strategies.

Discovery of microRNAs (miRNAs) twenty years ago, has advocated a new era of “Molecular Genetics”. About 2000 miRNAs are present, that regulate one third of the genome. MiRNAs dysregulated expression may contribute to several diseases including tumor growth. Their presence in body fluids, reflecting levels alteration in various cancers, merit circulating miRNAs as the “next generation biomarkers” for early stages tumor diagnosis and/or prognosis. Herein, we performed a comprehensive literature search focusing on the origin, biosynthesis and role of miRNAs and summarized the foremost studies centering on miRs value as non-invasive biomarkers in different non-communicable diseases, including various cancer types. Moreover, during chemotherapy many miRNAs were linked to multidrug resistance, via modulating numerous biological processes and/or pathways that will be highlighted as well.

Researches are moving to iron and ammonia elimination from ground water. Here, we are using poly acrylic–poly acrylamide hydrogel which grafted with 3-chloroaniline. This copolymer was synthesized by addition polymerization. Effect of agitation time, dosage and adsorbents temperature on the removal process sensitivity has been investigated. The copolymer was described experientially and theoretically. Isothermal, kinetic adsorption models and were discussed. This hydrogel could be regenerated efficiently (98.3%removal of iron and 100% removal of ammonia). Density functional theory DFT method using B3LYP/6-311G(d,p),LANL2DZ level of the theory were managed to investigate stationary states of grafted co-polymer and the complexation energy of the hydrogel with the studied cations. NBO analysis is using DFT to investigate the negative centers on the hydrogel. The complexation energy showed selectively of hydrogel to studied cations.

A hallmark of Alzheimer’s disease (AD) are the proteinaceous aggregates formed by the amyloid-beta peptide (Aβ) that is deposited inside the brain as amyloid plaques. The accumulation of aggregated Aβ may initiate or enhance pathologic processes in AD. According to the amyloid hypothesis any agent that has the capability to inhibit Aβ aggregation and/or destroy amyloid plaques represents a potential disease modifying drug. In 2023, a humanized IgG1 monoclonal antibody (lecanemab) against the Aβ soluble protofibrils was approved by US FDA for AD therapy thus providing compelling support to the amyloid hypothesis. To acquire a deeper insight on the in vivo Aβ aggregation, various animal models, including aged herbivores and carnivores, non-human primates, transgenic rodents, fish and worms are widely exploited. This review is based on the recent data obtained using transgenic animal AD models and presents experimental verification of the critical role in Aβ aggregation seeding of the interactions between zinc ions, Aβ with the isomerized Asp7 (isoD7- Aβ) and the α4β2 nicotinic acetylcholine receptor.

Background: World Health Organization (WHO) estimates that there were 558000 new cases with resistance to Rifampicin, of which 82% had multidrug-resistant tuberculosis (MDR-TB). Objectives: We aimed to identify the prevalence of MDR-TB in River Nile state, Sudan, and the risk factors contributing to its occurrence. Methods: This was a descriptive cross-sectional hospital-based study involved 200 specimens taken from patients suspected of having MDR-TB tested using an automated GeneXpert assay. Results: Results of GeneXpert assay showed that the presence of Mycobacterium tuberculosis in 81 (40.5%), and out of 81 positive test results there were 13 (16%) had MDR-TB. Additionally, 7 cases of MDR-TB were previously treated which represented about (53%) of MDR patients, the remaining 6 MDR-TB patients were new cases and represented (47%) of MDR-TB patients. Moreover, there were 4 MDR-TB patients who had a history of contact with MDR-TB patients. Conclusion: Prevalence of MDR-TB in River Nile State, Sudan was 16%, which is greater than WHO estimation for Sudan (10.1%). The results revealed that the main risk factor to develop MDR-TB was a history of contact with MDR-TB, so adherence to treatment and social awareness about the spread of MDR-TB are crucial preventive measures.

Reaction of 2-mercapto-3-phenylquinazolin-4(3H)-one (MPQ) with both 4-vinyl benzyl chloride and allyl bromide furnished the reactive heterocyclic monomers 3-phenyl-2-((4-vinylbenzyl) thio) quinazolin-4(3H)-one (PVTQ) and 2-(allylthio)-3-phenylquinazolin-4(3H)-one (APQ), respectively. Copolymerization of PVTQ monomer with styrene and methyl methacrylate in the presence of 2,2′-azobisisobutyronitrile (AIBN) afforded the copolymers PS-co-PPVTQ and PMMA-co-PPVTQ, respectively. Similarly, copolymerization of monomer APQ with styrene and methyl methacrylate (MMA) afforded the copolymers PS-co-PAPQ and PMMA-co-PAPQ, respectively. The resulted copolymers were characterized by using FT-IR, 1H-NMR and GPC techniques. Silver nanocomposites of PS, PMMA, PS-co-PPVTQ, PMMA-co-PPVTQ, PS-co-PAPQ and PMMA-co-PAPQ were synthesized by the addition of silver nitrate into the polymer solution. The reduction of silver ions into silver nanoparticles was performed in DMF and water. Thermogravimetric (TGA) analysis was used to determine the thermal stability of the copolymers and their silver nanocomposites. The X-ray diffraction (XRD) analysis indicated the amorphous structures of the co-polymers and confirmed the formation of silver nanoparticles. The antitumor and antibacterial activities were screened for the copolymers and enhanced by the formation of their silver nanocomposites. In vivo antitumor activity in Ehrlich Ascitic Carcinoma (EAC) mice model showed that PS-co-PPVTQ/Ag NPs, PMMA-co-PPVTQ/Ag NPs, and PMMA-co-PAPQ/Ag NPs displayed promising inhibitory effects against EAC and induce apoptosis against MCF-7 cells.

We present a very computationally light and fast approximation algorithm and then verify it with genetic algorithm and simulated annealing. We show that our algorithm is on par with GA and SA in terms of output produced while having a tightly bounded time complexity. Our algorithm works best when there is a strong positive correlation between the reliability of a component and its cost. We present two algorithms with the same essence. One of them is system cost bounded and the other is target reliability bounded. Our proposed algorithm works on a subsystem level redundancy instead of component level redundancy.

Hospital-acquired infections (HAIs) contribute to increased length of hospital stay, high mortality and higher health-care costs. Prevention and control of HAIs is a critical public health concern. We conducted a cross-sectional survey of 213 hospital health-care workers in Qassim, Saudi Arabia. We assessed Knowledge, Attitude and Practice (KAP) of standard infection control precautions using a structured questionnaire. Predictors of KAP were investigated using multivaraible logistic regression analyses and independent sample t tests. Prevalence of good (≥80% correct response) knowledge, attitude and practice were 67.6%, 61.5% and 73.2%, respectively. Predictors of good knowledge included age over 34 years (adjusted odds ratio: 30.5, p<0.001), and receiving training (13.3, p<0.001). Predictor of positive attitude was having >6 years of experience (5.5, p<0.001). While, the predictors of good practice were having >6 years of experience (2.9, p<0.01), previous exposure to HAIs (2.5, p<0.05) and training (3.5, p<0.01). However, being female (0.22, p<0.001) and older (>34 years) (0.34, p<0.01) were negatively associated with knowledge. Results indicate that older academic programs might not have adequately covered infection crontrol. Arranging training for HCWs might be useful in improving their knowledge of standard infection control precautions and is also expected to facilitate positive attitude and practice.

The aims of this study are to measure the technical efficiency (TE) of Cambodian household’s rice production and trying to determine its main influencing factors using the stochastic frontier production function. The study utilized primary data collected from 301 rice farmers in three selected districts of Battambang by structured questionnaires. The empirical results indicated the level of household rice output varied according to differences in the efficiency of production processes. The mean TE is 0.34 which means that famers produce 34% of rice at best practice at the current level of production inputs and technology, indicates that rice output has the potential of being increased further by 66% at the same level of inputs if farmers had been technically efficient. Furthermore, between 2013-2015 TE of household’s rice production recorded -14.3% decline rate due to highly affected of drought during dry season of 2015. Moreover, evidence reveals that land, fertilizer, and pesticide are the major influencing input factors of household’s rice production, while disaster, education of household head, family size and other crops’ cultivated area are core influencing factors decreasing TE. Conversely, the main influencing factors increasing TE are irrigated area, number of plot area and sex of household head.

The aims of this study are to measure the technical efficiency (TE) of Cambodian household’s rice production and trying to determine its main influencing factors using the stochastic frontier production function. The study utilized primary data collected from 301 rice farmers in three selected districts of Battambang by structured questionnaires. The empirical results indicated the level of household rice output varied according to differences in the efficiency of the production processes. The mean TE is 0.34 which means that famers produce 34% of rice at best practice at the current level of production inputs and technology, indicates that rice output has the potential of being increased further by 66% at the same level of inputs if farmers had been technically efficient. Furthermore, between 2013-2015, TE of household’s rice production recorded -14.3% decline rate due to highly affected of drought during dry season of 2015. Moreover, evidence reveals that land, fertilizer, and pesticide are the major influencing input factors of household’s rice production, while disaster, education of household head, family size and other crops’ cultivated area are core influencing factors decreasing TE. Conversely, the main influencing factors increasing TE are irrigated area, number of plot area and sex of household head.

The present study aims to measure the technical efficiency and establish core factors effecting rice production in Cambodia. Four-years dataset generated from the central government document “Profile on Economics and Social” of entire 25 provinces between 2012-2015 and the stochastic production frontier model (SFA) was applied. The results indicated that the level of output (quantity) of Cambodian rice production varied according to the different level of capital investment in agricultural machineries, total rice actual harvested area, and technically fertilizers application within provinces. Furthermore, evidence revealed the overall mean efficiency of rice production is 78.4% implies that there is still room to further improve technical efficiency by given the same level of inputs and technology. More importantly, the findings revealed that irrigation, production technique and amount of agricultural supporting staffs are being as the most important influencing factors of rice production’s technical efficiency in Cambodia. In conclusion, present study strongly recommends the development of irrigation systems and good water management practices to be considered and bring into more effective actions by the central government as well as related agencies for improving rice production in Cambodia in addition to capital investment and improving technical skills of supporting staffs and rural farmers.

Cotton is the most ubiquitous and profitable fiber with diverse industrial and domestic applications. Grown in over 100 countries, it has a global market value of about $40 billion and employs over 350 million people from fields to textile mills, contributing about 7% of total labor-force recruitment in developing economies. Cotton has an indeterminate growth habit and an extensive tap root system affected by soil physicochemical and environmental conditions. There is a consensus among experts that conventional cotton cultivation still has a long way to attain sustainability, which is essential if cotton will maintain its competitive edge over other natural and synthetic fibers like hemp, polyesters, and rayon. Despite several efforts already committed to growing cotton sustainably, sustainability has eluded cotton cultivation globally because of the intense farm inputs (freshwater, pesticides, and heavy-duty equipment) needs, especially in developing economies. Some of the technological advancements towards achieving the goal of sustainable cotton cultivation include the development of new varieties, improved irrigation and mulching and precision agriculture techniques, application of remote sensing and Unmanned Aerial Systems (UAS) combined with image processing, and the introduction of autonomous and multi-purpose robotic platforms for growing and harvesting cotton. This review attempts to evaluate the successes already achieved by stakeholders in moving cotton towards sustainable production and identify areas where efforts are still needed to reach sustainable production and improved profitability goals for cotton with projections for future research directions.

The increased emergence of multidrug-resistant Helicobacter pylori influences the prevention of stomach cancer. Zingiber officinale is a plant usually used in folk medicine to treat a variety of diseases involving infections, nausea, vomiting, peptic ulcer, dyspepsia, and inflammation. This study was conducted to evaluate the ability of Z. officinale extract to combat resistant H. pylori. The disc diffusion, microdilution, and microplate assays were performed to evaluate the susceptibility to antibiotics, and the antibacterial and antibiofilm activities of the Z. officinale extracts. Using the checkerboard method, the combined effects of the gentamicin and Z. officinale extract were investigated. In addition, anti-inflammatory activity and GC-MS analysis were determined by the modified protocol. According to the findings, H. pylori isolates exhibited resistance rates of 56.33, 50.0, and 45.85 for metronidazole, gentamicin, and tetracycline, respectively. The methanolic extract of Z. officinale had the strongest effectiveness against resistant H. pylori isolates with MIC of 20.0 to 50.0 µg/ml against both H. pylori isolates and the stranded strain NCTC 11637. Z. officinale extract suppress the biofilm formed by H. pylori isolates with a percentage of 92.96% at 50.0µg/ml, compared with 97.19% for gentamicin at the same concentration. According to FICI values, combination of methanolic Z. officinale extract to gentamicin increases bacterial sensitivity to such drugs. Moreover, the Z. officinale extract exhibits strong anti-inflammatory activity. The GC-MS analysis of Z. officinale extract exhibits 17 different chemical compounds. Conclusions: The Z. officinale extract contain the anti-inflammatory compound gingerol as the main constituent which inhibits the growth of H. pylori and its biofilm, are a promising natural therapeutic alternative or enhance antibiotics activity

The measurement of discrimination in employment is a key variable in understanding dynamics in the nature of and change in ‘race relations’. Measuring such discrimination using ‘situation’ and ‘correspondence’ tests was influenced by John Rex’s sociological analyses, begun in in England in the 1960s, and replicated in Europe and America in later decades. This literature is reviewed, and the methodologies of testing for employment discrimination are discussed. Recent work in Britain and The Netherlands is considered in detail in the light of changing social structures, and the rise of Islamophobia. Manchester, apparently the city manifesting the most discrimination in Britain, is considered for a special case study, with a focus on one individual, a Muslim woman seeking intermediate level accountancy employment. Her vita was matched with that of a manifestly indigenous, white Briton. Submitted vitas (to 1,043 potential employers) indicated significant discrimination against the Muslim woman candidate. Results are discussed within the context of Manchester’s micro-sociology, and Muslim women’s employment progress in broader contexts, drawing on our work in Jordan and Palestine. We conclude with the critical realist comment that the “hidden racism” of employment discrimination shows that capitalist societies continue to be institutionally racist, and the failure to reward legitimate aspirations of minorities pushes ethnic minorities into a permanent precariat, with implications for social justice and social control, which denies minority efforts to “integrate” in society’s employment systems.

This study evaluates the feasibility of stabilizing clay bricks with marble cutting waste (MCW). This waste currently discarded in huge quantities as a sludge resulted from sawing the marble blocks to slabs, grinding and polishing of marble processes to the landfills located around the marble processing factories located in the Shaq El-Thoban industrial zone, Cairo governorate, Egypt causing negative impacts on the environment, health and sustainable development. Experimental investigations were carried out to explore the effect of addition of the MCW in different clay-base mixes at different percentages up to 25% at the expense of the hydrated lime. Cement, hydrated lime and MCW are the three types of solidification agents used, clay and sand were also added in the formulations of the unfired clay brick specimens. Laboratory cylindrical stabilized and compressed specimens were made, and then they were cured in a humidity chamber for 2 and 4 weeks, then after were air dried, tested and evaluated according to the Egyptian code for the building by the stabilized and compressed earth soil (ECBS, 2016). To enhance the durability of the cured specimens, transparent silicon – based paint was used for this purpose. The laboratory results demonstrate high potential usage of MCW based additives up to 15% incorporating HL. In addition, the used paint could be an effective treatment way for the use of stabilized bricks in a wet environment. The use of eco-friendly building materials will be a great contribution for the environmental advantages and suggest a remarkable economical alternative to the fired building units.

Keywords: olfactory rehabilitation; chronic pain; fMRI;

Revealing the spatial distribution mechanism of the coupling effect between soil water and salt is essential for managing saline-alkali farmland. This study utilized the multifractal method to analyze soil water and salt under varying water content levels in arid saline-alkali farmland. Soil samples were collected on the second (S1), fifth (S2), eighth (S3), eleventh (S4), and fourteenth (S5) days after a rainfall event. The findings showed that a significant decrease in soil water content, contrasting with an increase in soil salt content throughout the soil layers post-rainfall. As water content decreased, the spatial variability of soil water initially increased from S1-3 and then decreased, while the spatial variability of soil salt decreased. The spatial distribution between soil water and salt exhibited a high correlation at S3-4 (with relative water content of soil ranging from 0.52 to 0.75) due to their coupling effect. However, soil salt was unevenly leached by rainfall at high water content levels (S1-2) and precipitated at low water content levels (S5), resulting in low spatial variability correlations between soil water and salt. This study elucidated the coupling process of soil water and salt, identifying their spatiotemporal distribution mechanism in dryland agricultural areas.

More than 20 years after the discovery of the first anelloviruses (AVs), they still remain a mysterious group of viruses. To date, there is no clear understanding of their impact on the host organism, although information is emerging about their participation in various pathologies. However, it is well known that AVs are an important component of the human virome. In the current study we assessed the abundance of AVs in viromes from four nasal and pharyngeal samples from children with respiratory symptoms using a metagenomic approach. It is worth noting that three patients had known respiratory viruses and one did not have any. Regarding AVs, they were detected in all samples, namely Torque teno mini virus (TTMV). The greatest abundance and diversity of AVs (Torque teno virus (TTV), TTMV and Torque teno midi virus (TTMDV)) were shown in a diseased patient with an absence of respiratory viruses, which may indicate the potential involvement of AVs in the maintenance of respiratory symptoms. An activated immune system to combat the main pathogens, against the background of which the number of AVs decreases, is discussed as a possible reason for the reduced diversity of anellome in other patients. We also compared the results of the metagenomic approach and qPCR for major respiratory viruses, which were in agreement. In addition, metagenomic sequencing made it possible to obtain additional data on viral genomes in order to establish their taxonomic identification and characterize individual viral profiles in patients from the Siberian part of Russia.

In the current paper, we present our work towards developing a solution combining computer vision and AI to support footrest design customization in the wheelchair industry. Wheelchairs and postural systems are complex and often user centric in the design process. Those products require a wide range of adjustments to adapt to the various anthropometries and disabilities of patients. Most commercial products, dedicated to severe disability, also include a series of additional elements, designed to keep the patient in a comfortable but “fixed” position. Such systems do not allow to “fix and maintain” the position of patient foot, especially for patients who have no control over their lower limbs. For that reason, it becomes essential to supply wheelchairs with specific elements to hold patient's shoe in place. Commercial foot supports are typically developed on standard sizes and do not always cover the entire population. In addition, those designs are based on standard shoes, thus they do not lend themselves well to adapting to special shoes or orthopedic shoes. Feet final position therefore becomes a key element in correct postural management. In this paper, we investigate the use of computer vision and AI to correctly define customization parameters of the footrest. The proposed design has been developed based on the specifications received from the Pro Medicare S.r.l orthopedic technicians. We present suitable algorithms, design principles and well defined components towards the implementation of our proof of concept. We also present the testing activities we have undertaken and the obtained performance results.

Shale gas production is associated with significant usage of fresh water and discharge of wastewater. Consequently, there is a necessity to create the proper management strategies for water resources in shale gas production and to integrate conventional energy sources (e.g., shale gas) with renewables (e.g., solar energy). The objective of this study is to develop a design framework for integrating water and energy systems including multiple energy sources, cogeneration process, and desalination technologies in treating wastewater and providing fresh water for shale gas production. Solar energy is included to provide thermal power directly to a multi-effect distillation plant (MED) exclusively (to be more feasible economically) or indirect supply through a thermal energy storage system. Thus, MED is driven by direct or indirect solar energy, and excess or direct cogeneration process heat. The proposed thermal energy storage along with the fossil fuel boiler will allow for the dual-purpose system to operate at steady-state by managing the dynamic variability of solar energy. Additionally, electric production is considered to supply a reverse osmosis plant (RO) without connecting to the local electric grid. A multi-period mixed integer nonlinear program (MINLP) is developed and applied to discretize operation period to track the diurnal fluctuations of solar energy. The solution of the optimization program determines the optimal mix of solar energy, thermal storage, and fossil fuel to attain the maximum annual profit of the entire system. A case study is solved for water treatment and energy management for Eagle Ford Basin in Texas.

Electrospun ultrathin fibers based on binary compositions of polylactide (PLA) and poly(ε-caprolactone) (PCL) with different ratios of polymer components from 0/100 to 100/0 wt. % were studied. Using a combination of thermal (DSC) and relaxation (EPR) measurements, the effect of biopolymers content on the characteristics of the crystal structure of PLA and PCL and the diffusive rotational mobility of the stable TEMPO radical in the amorphous regions of PLA/PCL compositions was shown. It was revealed that after PLA and PCL blending, significant changes in the degree of crystallinity of PLA, PCL segmental mobility, sorption capacity of the radical as well as activation energy of rotational diffusion in the amorphous regions of PLA/PCL composition are observed. The characteristic region of biopolymers’ composition from 50/50 to 30/70 % PLA/PCL blends ratio was found, where the inversion transition of PLA from dispersive medium to dispersive phase where an inversion transition is assumed when the continuous medium of the PLA transforms into a discrete phase. The performed studies made it possible for the first time to carry out a comprehensive analysis of the effect of the system component ratio on the structural and dynamic characteristics of the PLA/PCL film material at the molecular level.

The fifth Industrial revolution (I5.0) prioritizes resilience and sustainability, integrating cognitive cyber-physical systems and advanced technologies to enhance machining processes. Numerous research studies have been conducted to optimize machining operations by identifying and reducing the sources of uncertainty and estimating the optimal cutting parameters. Virtual modeling and Tool Condition Monitoring (TCM) methodologies have been developed to assess the cutting states during machining processes. With a precise estimation of cutting states, the safety margin necessary to deal with the uncertainties can be reduced, resulting in improved process productivity. This paper reviews the recent advances in high-performance machining systems with a focus on the cyber-physical models developed for the cutting operation of difficult-to-cut materials using cemented carbide tools. An overview of the literature and background on the advances in the offline and online process optimization approaches have been presented. Process optimization objectives such as tool life utilization, dynamic stability, enhanced productivity, improved machined part quality, and reduced energy consumption and carbon emissions are independently investigated for the offline and online optimization methods. Addressing the critical objectives and constraints prevalent in industrial applications, the paper explores the challenges and opportunities inherent in developing a robust cyber-physical optimization system

Substantial research is required to ensure that micro-mobility ride sharing provides a better fulfillment of user needs. This study proposes a novel crowdsourcing model for the ride-sharing system where light vehicles such as scooters and bikes are crowdsourced. The proposed model consists of three entities: suppliers, customers, and a management party responsible for receiving, renting, booking, and demand matching with offered resources. It can allow suppliers to define the location of their private e-scooters/e-bikes and the period of time they are available for rent. Using a dataset of over 9 million e-scooter trips in Austin, Texas, we ran an agent-based simulation six times using three maximum battery ranges (i.e., 35, 45, and 60 km) and different numbers of e-scooters (e.g., 50 and 100) at each origin. Computational results show that the proposed model is promising and might be advantageous to shift the charging and maintenance efforts to a crowd of suppliers.

Mining can impact the environment, biodiversity and human health through direct and indirect practices. This study investigated the effects of gold mining on Gerbillus nanus, pointing to organ dysfunction and redox imbalance. Soil samples, Lycium shawii and G. nanus were collected from a site near a mining planet and a control site. Soil and L. shawii samples from the mining site showed a significant increase cadmium (Cd), cupper (Cu), mercury (Hg), arsenic (As), zinc (Zn), lead (Pb) and vanadium (V). Hepatic, renal and pulmonary Cd, Pb, Hg, Zn, Cu, Fe, As and V concentrations were increased significantly in G. nanus at the mining site. Markers of liver and kidney function were elevated in serum, and several histological manifestations were demonstrated in liver, kidney and lung of G. nanus at the mining site. Malondialdehyde and nitric oxide were increased, and glutathione and antioxidant enzyme were declined in the liver and kidney of G. nanus. In conclusion, mining practices triggered tissue damage and oxidative stress in G. nanus living close to the mining site. These findings can represent the scientific basis for evaluating the environmental and health impact of mining in the on the nearby communities.

Shape Memory Polymer (SMP) actuators are smart materials that adapt and switch shape in response to environmental conditions, allowing controlled and dynamic building systems. The integrated SMP strip enabled the adaptive facade shading system to operate independently and with flexibility under certain thermoresponsive conditions to regulate building performance. This study aims to improve adaptive façade performance in a hot-humid climate by determining optimal thermal activation factors for the shape memory polymer. This was achieved by comprehensively examining and analysing the impact of various SMP activation parameters on energy efficiency, thermal comfort, and visual comfort. In addition, dynamic IES-VE building energy simulation was used to evaluate the thermal performance of the adaptable facade. The results were validated using a multicriteria approach to compare with the existing glass façade of a high-rise apartment. The results showed that the coactivation technique, which combines solar radiation and air temperature triggers, proved to be the most efficient strategy to improve the performance of the adaptive façade. This strategy minimised heat gain, lowered indoor temperatures, reduced glare, and enhanced daylight comfort, resulting in notable energy savings through reduced cooling consumption. The study concluded that the utilisation of SMP actuators with fine-tuning activation parameters significantly optimised adaptive façade performance, promoting functionality, efficiency, and sustainability in buildings.

With the vast amount of goods being shipped around the world, there is a need to track and manage various types of assets, particularly shipping containers. Logistics industries dealing with small facilities, shipments, equipment, and vehicles must be tracked. There are many applied asset tracking systems such as Radio-Frequency Identification (RFID), Bluetooth Low Energy (BLE) Beacon, and Long-Range Radio (LoRa). This paper presents these systems and focuses on locating assets using LoRaWAN technology, which has a positive impact on the responsive and sustainable cities in Egypt. IoT-based Long Range (LoRa) is a low-power, wide-area communication technology that uses radio frequencies to transmit data over long distances. The extended range, low power consumption, low maintenance, and the ability to store location data when the end node that needs to connect to the asset is out of the gateway's coverage make LoRa a good choice for developing asset-tracking applications. This paper introduces a real-time tracking experiment as a result of a project implementation, whose goals are aligned with industry, innovation, and infrastructure and Sustainable Cities and Communities, the Sustainable Development Goals (SDGs) No. 9 and 11.

All over the world, externally bonded fiber-reinforced polymer systems used to strengthen concrete elements improve building sustainability. However, reports issued by the American Concrete Institute Committee 440 called for heavy scrutinizing before actual field implementation. The very limited number of proposed equations lacks reliability and accuracy. Thus, further investigation in this area is needed. In addition, machine learning techniques are being implemented successfully in developing strength models for complex problems. This study aims to provide a reliable machine learning model based on an experimental database. The proposed model was developed and validated against the experimental database and the very limited models in the literature. The model showed improved agreement with the experimental results compared to the previous models.

The ability of S. aureus to infect humans and cause a wide range of infections so efficiently is a consequence of the many variant virulence factors that it can produce. Superantigens (SAgs) make up a group of them and include staphylococcal enterotoxins (SE). The main objective of this study was to detect enterotoxin gene cluster (EGC) in S. aureus isolates that caused infections in Paraguayan children in the year 2017, through an observational and cross-sectional study. The detection of the EGC including the seg, sei, sem, sen, seo, and seu genes, was carried out by end-point PCR. 181 S. aureus isolates were collected, most of them caused skin and soft tissue infections (SSTI, n=140, 77%) and came from children under 6 years 50% (n=90). At least one SE gene was detected in 96% (174/181) of isolates and 24% (44/181) carried the entire EGC. An association between methicillin resistance and seg, sei, seo, and seu gene carriage (p ≤0.05) was observed. A high prevalence of EGC was detected in S. aureus isolates collected from infected children attending the main health care centers in Paraguay, its importance is due to the potential of these toxins to aggravate staphylococcal infections.

This paper analyses the application of deep learning techniques for predicting wave overtopping events in port environments using sea state and weather forecasts as inputs. The study was conducted in the outer port of Punta Langosteira, A Coruña, Spain. A video recording infrastructure was installed to monitor overtopping events from 2015 to 2022, identifying 3709 overtopping events. The data collected was merged with actual and predicted data for the sea state and weather conditions during the overtopping events, creating three datasets. We used these datasets to create several machine learning models to predict whether an overtopping event would occur based on sea state and weather conditions. The final models achieved a high accuracy level during the training and testing stages: 0.81, 0.73, and 0.84 average accuracy during training and 0.67, 0.48, and 0.86 average accuracy during testing, respectively. The results of this study have significant implications for port safety and efficiency, as wave overtopping events can cause disruptions and potential damage. Using deep learning techniques for overtopping prediction can help port managers take preventative measures and optimize operations, ultimately improving safety and helping to minimize the economic impact that overtopping events have on the port's activities.