The primary aim of this study is to investigate the relationship of the Mediterranean diet (MD) with metabolic syndrome (MetS) and its components in Caucasian subjects between 35 and 74 years. The secondary aim is to analyze sex differences. Methods: A cross‑sectional trial. This study utilized data from the EVA, MARK, and EVIDENT studies, a total of 3417 subjects with a mean age of 60.14±9.14 years (57% men). MetS was defined based on the Joint Scientific Statement National Cholesterol Education Program III. Waist circumference, blood pressure, fasting plasma glucose, and lipid profile were measured. Adherence to the MD was assessed with the 14-item Mediterranean Diet Adherence Screener (MEDAS) questionnaire used in the PREDIMED study. Good adherence was considered when the MD value was higher than the median value. Results: The mean value of the MEDAS questionnaire was 5.83±2.04; (Men 5.66±2.06 and women 6.04±1.99; p<0.001). Adherence to the MD was observed by 38.6% (34.3% men and 40.3% women; p<0.001). MetS was observed in 41.6% (39.0% men and 45.2%women p<0.001). In the multiple regression analysis after adjusting for possible confounders, the mean MD value showed a negative association with the number of MetS components per subject (β=-0.336), and with the different components of MetS: Systolic blood pressure (β=-0.011), Diastolic blood pressure (β=-0.029), glycemia (β=-0.009), Triglycerides (β=-0.004), Waist circumference (β=-0.026), except with the HDL-cholesterol value which showed a positive association (β=0.021); (p<0.001 in all cases). The adjusted logistic regression models showed that an increase in MDA decreases the probability of MetS (OR =0.56) and its components: blood pressure ≥130/85 mmHg (OR = 0.63), fasting plasma glucose ≥100 mg/dL (OR = 0.62); triglycerides ≥150 mg/dL (OR = 0.65); waist circumference ≥88 cm in women and ≥102 cm in men (OR = 0.74), and increases high-density lipoprotein cholesterol <40 mg/dL in men or <50 mg/dL in women (OR = 1.70); (p<0.001 in all cases). The results by sex were similar, both in multiple regression and logistic regression. Conclusion: The results of this study suggest that a greater adherence to the Mediterranean diet decreases the probability of presenting Mets globally and by sex.

Huntington’s Disease (HD) is a devastating neurodegenerative disorder caused by a CAG trinucleotide repeat expansion in the HTT gene, for which no disease modifying therapies are currently available. Much of the recent research has focused on developing therapies to directly lower HTT expression, and while promising, these therapies have presented several challenges regarding administration and efficacy. Another promising therapeutic approach is the modulation of HTT post-translational modifications (PTMs) that are dysregulated in disease and have shown to play a key role in HTT toxicity. Among all PTMs, modulation of HTT phosphorylation has been proposed as an attractive therapeutic option due to the possibility of orally administering specific kinase effectors. One of the kinases described to participate in HTT phosphorylation is Protein Kinase CK2. CK2 has recently emerged as a target for the treatment of several neurological and psychiatric disorders, although its role in HD remains controversial. While pharmacological studies in vitro inhibiting CK2 resulted in reduced HTT phosphorylation and increased toxicity, genetic approaches in mouse models of HD have provided beneficial effects. In this review we discuss potential therapeutic approaches related to the manipulation of HTT-PTMs with special emphasis on the role of CK2 as a therapeutic target in HD.

The chemistry and electrochemistry basic fields have been active since the last two decades of the past century studying how surface modification of electrodes by coating with conductive films enhances their activity and performance. In the light of the development of alternative sustainable ways of energy storage and carbon dioxide conversion by electrochemical processes, these research studies have jumped in the 21st century to more applied fields such as chemical engineering, energy and environmental science and engineering. The huge amount of literature on experimental works dealing with the development of CO2 electroreduction processes addresses electrocatalyst development. Membranes can help understanding and controlling the mass transport limitations of current electrodes and reactors designs. The present bibliometric review addresses the papers published in the 21st century regarding membrane coated electrodes and electrocatalysts to enhance electrochemical reactor performance and viability with a special focus on the urgent issue of carbon dioxide capture and utilization.

Microalgae are used in various biotechnological processes, such as biofuel production due to their high biomass yields, agriculture as biofertilizers, production of high-value-added products, de-contamination of wastewater, or as biological models for carbon sequestration. The number of these biotechnological applications is increasing, and as such, any advances that contribute to reducing costs and increasing economic profitability can have a significant impact. Nitrogen fixing organisms, often called diazotroph, also have great biotechnological potential, mainly in agri-culture as an alternative to chemical fertilizers. Microbial consortia typically perform more com-plex tasks than monocultures and can execute functions that are challenging or even impossible for individual strains or species. Interestingly, microalgae and diazotrophic organisms are capable to embrace different types of symbiotic associations. Certain corals and lichens exhibit this sym-biotic relationship in nature, which enhances their fitness. However, this relationship can also be artificially created in laboratory conditions with the objective of enhancing some of the biotech-nological processes that each organism carries out independently. As a result, the utilization of microalgae and diazotrophic organisms in consortia is garnering significant interest as a potential alternative for reducing production costs and increasing yields of microalgae biomass, as well as for producing derived products and serving biotechnological purposes. This review makes an effort to examine the associations of microalgae and diazotrophic organisms, with the aim of highlighting the potential of these associations in improving various biotechnological processes.

The Convective Rainfall Rate from Cloud Physical Properties (CRPh) for Meteosat Second Generation Satellites is a day-only precipitation algorithm developed at the Spanish Meteorological Agency (AEMET) for EUMETSAT’ Satellite Application Facility in support to Nowcasting and Very Short Range Forecasting (NWC SAF). It is therefore mainly intended to provide input for monitoring and near-real-time forecasts for the next few hours. This paper critically discusses the theoretical basis of the algorithm with special emphasis in the empirical values and assumptions in the microphysics of precipitation and compares the performances of the CRPh with its antecessor, the Convective Rainfall Rate algorithm (CRR), using an object-based method. The analyses show that AEMET’s CRPh is physically consistent and that outperforms the CRR. The applicability of the algorithm for nowcasting and the challenges to evolve the product to an all-day algorithm are also presented.

The practice of spatial econometrics revolves around a weighting matrix, which is often supplied by the user on previous knowledge. This is the so called $\mathbf{W}$ issue. Probably, the aprioristic approach is not the best solution although, nowadays, there few alternatives for the user. Our contribution focuses on the problem of selecting a $\mathbf{W}$ matrix from among a finite set of matrices, all of them considerer appropriate for the case. We develop a new and simple method based on the Entropy corresponding to the distribution of probability estimated for the data. Other alternatives, which are common in current applied work, are also reviewed. The paper includes a large Monte Carlo to calibrate the effectiveness of our approach compared to the others. A well-known case study is also included.

Probiotics are microorganisms infused in products for health benefits including acceleration of nutrient digestion, however, it is also important to ensure the safety prior to incorporation. Here, we present evidence of the ability of two probiotic isolates,Lacticaseibacillus paracasei BCRC-16100 and Lacticaseibacillus paracasei ZFM54, in the (1) enhancement of carbohydrate digestion, (2) tolerance to stress, and (3) antibiotic resistance. Approaches include whole genome sequence (WGS) analysis and bioactivity assays. WGS revealed genes suggesting the ability of the two isolates to promote carbohydrate digestion, tolerance to stress and antibiotic resistance. Carbohydrate digestive ability was confirmed through a biochemical assay where the two isolates cause glucose release from starch. The two isolates also showed versatility in a range of temperature and alcohol concentration. For antibiotic resistance particularly on vancomycin, there are three mechanisms namely transporter control, transcriptional regulation, and efflux pump. Furthermore, promoter and transposable element analysis showed that some of the active antibiotic resistant (AbR) genes can be laterally transferred. Altogether, we show the potential of two probiotic isolates to be incorporated in products for improved carbohydrate digestion and the need to address the removal of active and mobile antibiotic resistance genes that may compromise safety.

Molybdenum (Mo) is vital for the activity of a small but essential group of enzymes called mo-lybdoenzymes. So far, specifically five molybdoenzymes have been discovered in eukaryotes: nitrate reductase, sulfite oxidase, xanthine dehydrogenase, aldehyde oxidase, and mARC. In order to become biologically active, Mo must be chelated to a pterin, forming the so-called Mo cofactor (Moco). Deficiency or mutation in any of the genes involved in Moco biosynthesis results in the simultaneous loss of activity of all molybdoenzymes, fully or partially preventing the normal development of the affected organism. To prevent this, the different mechanisms in-volved in Mo homeostasis must be finely regulated. Chlamydomonas reinhardtii is a unicellular, photosynthetic, eukaryotic microalga that has produced fundamental advances in key steps of Mo homeostasis over the last 30 years, which have been extrapolated to higher organisms, both plants and animals. These advances include the identification of the first two molybdate transporters in eukaryotes (MOT1 and MOT2), the characterization of key genes in Moco biosynthesis, the identification of the first enzyme that protects and transfers Moco (MCP1), the first characteriza-tion of mARC in plants, and the discovery of the crucial role of the nitrate reductase-mARC complex in plant nitric oxide production. This review aims to summarize all these advances made using C. reinhardtii as a model organism in Mo homeostasis and suggest how this microalga can continue to contribute to progress in this field.

In studies of dynamic stability and power quality, it is necessary to know the mechanical parameters that determine the transient response of a wind turbine. The exact value of these parameters is not as decisive as the power curve can be, but an estimate that is far from reality can distort or even invalidate the simulation results. Despite its importance, this information, especially the inertia, but also the stiffness and damping constant of the drive-train, is hardly available for the turbine model under investigation. In this work, the different bibliographical sources that provide values of blade inertia in kg·m2 will be reviewed, and above all, those that provide a distribution of masses along the span of the blade. With this, different reliable relations will be obtained that allow calculating the inertia of the turbine rotor, based on the mass and length of the blade. When the center of gravity is also available, a very correlated expression is provided to obtain the inertia. The even rarer references to the stiffness and damping constant of the drive-train will also be reviewed.

A new layout optimization method for offshore wind farms is proposed to minimize power deficits due to wake effect. The main engine of the algorithm is a gradient-descent method, in which an analogy is established between power deficit and repulsive electrostatic potential energy. To achieve a maximum dispersion in the initial solution, throughout the optimization process, new turbines are included in the centre of the concession area, and quickly expand outward looking for areas with less potential, in turn pushing the previous ones. When the optimization process ends, to avoid local maximums, it enters into a process of suppression of the set of locations that cause the greatest potential (power deficit). Then, a potential map of the entire area is created and a greedy algorithm includes new turbines to complete the layout with the final number of turbines. To speed up the search process and the creation of the potential map, two simplifications have been validated and added: the spatial distribution of velocities has been converted into its equivalent with point symmetry; and, for turbines affected by multiple wakes, the power deficit has been calculated by using a linear aggregation of powers, instead of the usual linear (or quadratic) aggregation of speeds. Owing to this type of aggregation, the process is accelerated in a factor of 90.

Sometimes there are clear and natural limits to the scope of action of a science, and in other cases they are simply convenient ones. Geographic Information Science (GISc) is a transversal science, with contacts with all geosciences but also with various formal sciences such as Mathematics, Logic and Computer Science. A first approach to specifying the limits of a science is through its definition. Definitions of GISc are often so expansive that they have been rightly criticized for practicing gerrymandering, in particular with the rest of the geosciences. To avoid this, an operational definition is proposed that places GISc among the sciences that handle Data and not Information. This solves the gerrymandering problem without really implying a significant cut of what is usually considered within GISc. As an unforeseen consequence, this delimitation will allow it to be characterized as Formal Science, leaving it as the only geoscience with this characteristic.

Inertial training is one of the most popular training methodologies in the last years and one of the objects of study in recent literature, however more studies are necessary to know its usefulness in young athletes. The aim of the current systematic review is to evaluate the current literature surrounding the chronic effect of inertial training on physical capacities of team sports through functional test. This systematic review was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses Protocols (PRISMA). The results revealed the effectiveness of these tools for improving abilities such jumps, sprints, change of directions and power measure. In conclusion, inertial training can be an adequate stimulus for the better performance in young athletes on team sports.

In this communication the concept of functional materials is understood such as real modified substrates for nanomedicine applications. Functional and modified substrates focused on microcapsules and devices for new nanomedicine diagnosis and treatments. Cases of different materials are shown to support the functionality strategy, as in particular chemicals, pharmacophores, and controlled nano-chemistry for the design of nanoplatforms. Recent studies have reported hybrid inorganic/organic compositions for biocompatible, biodegradable, and support materials added to particular physical properties such as conductive, semiconductive, and high electromagnetic fields from the near field within the nanoscale to far-field applications and new nano-pharmacophores and nanomedicine therapeutics. New approaches are shown from the nano-scale to the micro- and higher sizes of substrates for improved therapeutic strategies. Micro-capsules for biosensing and drug delivery applications were developed. In addition, we report recent and novel research centered on implantable, portable, and wearable devices applied to future treatments.

The development of biofuels and biodiesel industry specifically, has resulted in the generation of large amounts of glycerol as a surplus. The conversion of glycerol, into chemicals with indus-trial interest, through anaerobic fermentation using E. coli as a biocatalyst is an attractive alter-native to improve economic performance in the biodiesel industry, for example through the bi-otransformation of residual glycerol into ethanol. For 2019, the size of the global ethanol market was valued at $ 89.1 billion US dollar. Biodiesel can be produced from several materials like rapeseed, palm, soya, corn, palm kernel, frying oil or olive-pomace oil (OPO). The last, can be extracted from alperujo, byproduct of olive oil process. However, olive-pomace oil converting into biodiesel is not enough established to achieve a global olive-oil/biodiesel derived process with minimized waste generation. Traditionally biodiesel production process produces an equivalent of 10% by mass of glycerol as a waste or by-product. This work explores the conver-sion of residual glycerol into chemicals like ethanol and hydrogen with a focus on projecting raw material potential availability from OPO, contributing to the promotion of the use of biofu-els and biodegradable compounds.

Copper-nitride (Cu3N) semiconductor material is attracting much attention as a potential, next-generation thin-film solar-light absorber in solar cells. In this communication, polycrystalline Cu3N thin films were prepared using reactive-RF-magnetron-sputtering deposition, at room temperature, onto glass and silicon substrates. The very-broadband optical properties of the Cu3N thin film layers were studied by UV-MIR (0.2-40 μm) ellipsometry and optical transmission, to be able to achieve the goal of a low-cost absorber material to replace the conventional silicon. The reactive-RF-sputtered Cu3N films were also investigated by focused ion beam scanning electron microscopy, and both FTIR and Raman spectroscopies.

Air pollution is a global issue, and the transportation sector is recognized as the third-largest contributor to anthropogenic greenhouse gas emissions. Vehicles emit a range of chemical compounds as a direct result of the combustion process. The nature and quantity of these emissions depend on the vehicle's characteristics, road, and local weather conditions. As a result, these emissions require special attention due to the adverse effects contributing to global warming and significantly impacting human health. In this regard, diagnosing and monitoring air quality is crucial for understanding the nature and quantity of emissions generated by various sources. However, in developing countries, the necessary inputs, and data for conducting such analyses are not always available. Therefore, the purpose of this study is to estimate emissions specifically generated from road operations. To achieve this, HDM-4 calculation tool is utilized to quantitatively estimate these emissions. This tool was applied in Baja California, Mexico, on the Centinela-La Rumorosa highway. The results obtained show that annually, 372.5 tons of pollutant emissions are generated, composed of HC, CO, CO2, NOx, Par, SO2, and PB, covering a mere 128 kilometers of length within a state road network spanning 11,429 kilometers. This highlights the necessity of implementing strategies to reduce emissions or the environmental impact generated by vehicular operations on roads in developing countries.

Given the rise in the number of cases and their recurrences, Urinary Tract Infections (UTI) are one of the major burdens on public healthcare worldwide. Rapid, inexpensive and selective detection of Uropathogenic E. coli (UPEC), a major contributor to UTIs, is the need of the hour for effective treatment, given the rise of antibiotic-resistant bacteria due to improper diagnosis. Here we present a rapid, real-time, selective and label-free detection of UPEC using an integrated sensing platform based on Crossed Surface Relief Gratings (CSRGs) as nanoplasmonic sensors. Detection is achieved due to the unique Surface Plasmon Resonance (SPR)-based light energy exchange attributed to the CSRGs, allowing real-time sensing in a very narrow bandwidth of the incident light to pass where the SPR energy conversion occurs. The sensing ability of the platform is experimentally demonstrated by the detection of bulk Refractive Index (RI) changes, with a bulk sensitivity of 382.2 nm/RIU and a resolution in the order of 10-6 RIU. We demonstrate selective capture and detection of clinical concentration of UPEC, as opposed to other gram-negative bacteria, in real-time, a first for CSRGs. This work is particularly important for effective treatment of UTIs, allowing point-of-care diagnosis for economically disadvantaged regions around the world.

This literature review aims to assess the extent and depth of existing angel investment literature, particularly focusing on the city of Florianópolis. Through an examination of available literature, the report seeks to elucidate the mechanisms and practices employed in angel investing within the Florianópolis ecosystem. This comprehensive analysis involves synthesizing scientific literature and incorporating insights from authoritative sources in the field. Key findings highlight the imperative for further research and exploration in this domain and the potential for increased angel investment within the studied ecosystem.

The development of an equipment starts from an effective design activity. The concept selection process is an activity that is entailed in the design stage and its relevance in the design process cannot be overemphasized because it informs the choice of optimal conceptual design from a set of alternative design. Hence, there is a need to accrue efforts to the concept selection process because of its importance. This article presents the identification of optimal conceptual design as a Multicriteria decision making model by assessing the suitability of Fuzzy Measurement Alternatives and Ranking according to COmpromise Solution (MARCOS). The Fuzzy MARCOS model was developed to access four alternative conceptual designs of briquetting machines considering eight design features with several sub features. The fuzzy MARCOS model was able to rank the conceptual designs and the results obtained from the decision analysis showed that the Fuzzy MARCOS model was able to rank the designs based on their performance and the final values of the overall utility function. The overall utility function is a based on the utility degree of the conceptual design alternatives in terms of the best and worst designs identified by the model. The utility degree created a platform for comparison on how the design alternatives varies from the best and worst design.

Copper nitride (Cu3N), a metastable semiconductor material, but with reasonably-high-stability at room temperature, is drawing a great deal of attention as a very promising next-generation, earth-abundant, thin-film solar absorber. Its non-toxicity, on the other hand, makes it a very attractive eco-friendly semiconducting material. In the present work, Cu3N thin films were grown by employing radio-frequency magnetron sputtering, at room temperature, with 50-W RF-power, and partial nitrogen pressures of 8.0 and 1.0, onto glass substrates. Thus, the influence of argon on the optical properties of the Cu3N thin films was studied, with the goal of being able to achieve a low-cost, light absorber material, with appropriate properties in order to substitute the more conventional silicon, in photovoltaic cells. Variable-angle spectroscopic ellipsometry measurements have been conducted at three angles, 50∘, 60∘, and 70∘, respectively, in order to obtain the two ellipsometric parameters psi, ψ, and delta, Δ, respectively. For the constructed optical model, the bulk planar Cu3N layer is described by a one-dimensional graded-index model, combine with the mixture of a Tauc-Lorentz oscillator and up to four Gaussian oscillators, whereas a BEMA model with 50%-air-void is adopted in order to account for the existing surface-roughness layer. In addition, the optical properties such as the energy-band gap, and refractive index and absorption coefficient, were determined in order to assess the actual capability of this material as a light absorber for solar cells. The direct and indirect band gap energies were accurately calculated, and they were found to be in the ranges of 2.14-2.21 eV and very clse to 1.50 eV, respectively.

Copper-nitride (Cu3N) material is attracting much attention as a potential next-generation thin-film solar-light absorber. In this work, polycrystalline Cu3N thin films were prepared using reactive-RF-magnetron sputtering, at room temperature,onto glass and silicon substrates. The optical properties of the Cu3N thin layers were studied by spectroscopic ellipsometry and transmission, to achieve a low-cost absorber material to replace conventional silicon. The reactive-RF-sputtered Cu3N films were also investigated by FIB-SEM microscopy and FTIR spectroscopy.

We describe a family of paraxial and quasi-monochromatic optical wave packets with finite energy and smoothly shaped amplitude in space and time that develops a singularity in the intensity when spatiotemporally focused by imparting a converging spherical wave front and a negative temporal chirp. This singular behavior upon ideal focusing is manifested in actual focusing with finite apertures and in media with high-order dispersion in an "exploding" behavior featuring indefinitely increasing concentration of the energy when opening the aperture radius, thus exercising a continuous control on the focal intensity and spatial and temporal resolution. These wave packets offer a new way of focusing that outperforms what can be achieved with standard Gaussian wave packets in terms of focal intensity and resolution, and new possibilities in applications where energy concentration and its control are crucial.

The aim of this paper is to introduce a new methodology for the fault diagnosis of induction machines working in transient regime, when time-frequency analysis tools are used. The proposed method relies on the use of the optimized Slepian window for performing the short time Fourier transform (STFT) of the stator current signal. It is shown that for a given sequence length of finite duration the Slepian window has the maximum concentration of energy, greater than can be reached with a gated Gaussian window, which is usually used as analysis window. In this paper the use and optimization of the Slepian window for fault diagnosis of induction machines is theoretically introduced and experimentally validated through the test of a 3.15 MW induction motor with broken bars during the start-up transient. The theoretical analysis and the experimental results show that the use of the Slepian window can highlight the fault components in the current's spectrogram with a significant reduction of the required computational resources.

We present an attempt to estimate the long-term changes of Relative Sea Level (RSL) and the different factors contributing to such trends on a local and regional scale using a statistical linear model. The time series analysed correspond to 17 tide-gauges grouped in three different areas: the northern and western Atlantic coasts of the Iberian Peninsula, the Canary Islands, and the southern and eastern coasts of the Iberian Peninsula and Balearic Islands. The analysis was performed for two periods: 1948-2019, using tide-gauge data, and 1993-2019, using both tide-gauge and altimetry data for comparison. The trends for the period 1948-2019 ranged between 1.09 0.14 (Canary Islands) and 2.05 0.21 mm/yr, for the northern and western Atlantic Iberian Peninsula. Altimetry data during the period 1993-2019 yielded quite homogeneous results for all the locations and regions, ranging between 2.7 0.4 and 3.0 0.3 mm/yr. On the contrary, the results obtained from tide-gauge data for this recent period showed a large dispersion, very likely due to local effects or even levelling or instrumental errors. Nevertheless, when the results were averaged for each area, the observed trends were comparable to the altimetry results, with values of 2.3 0.8, 2.7 0.5 and 2.8 0.8 mm/yr for the three regions of study. A stepwise forward linear regression has been used to relate the observed RSL variability to the atmospheric forcing and the thermosteric and halosteric components of the sea level. Surprisingly, the thermosteric and halosteric contributions were not significantly correlated to the observed RSL in many cases, and consequently the steric, the total addition of mass, the mass of salt, and the freshwater contributions to the observed sea level trends could not be reliably estimated. This result seems to be the consequence of the scarcity of temperature and salinity data. This hypothesis is confirmed by the exception of L’Estartit tide-gauge. This location is close to a well sampled region. In this case, the atmospheric variables and the thermosteric and halosteric terms explained the 80 % of the observed RSL variance and the contributions of these terms could be estimated. The freshwater contribution for this location was between 1.3 and 1.4 mm/yr, consistent with recent estimations of the contributions of glaciers and Greenland and Antarctica Ice Sheets. These results highlight the importance of monitoring programs and routine sampling for the determination of the different factors contributing to the sea level variability.

Dupilumab is used to treat atopic dermatitis patients who have proven to be refractory to previous treatments. The aim of this study was to assess evolution and patient reported outcome measures in adult patients with moderate-to-severe atopic dermatitis treated with Dupilumab in routine clinical practice. The outcomes were evaluated and registered at baseline and weeks-16, 40 and 52. The variables evaluated were: diseases severity, pruritus, stressful life events, difficulty to sleep, anxiety and depression, quality of life, satisfaction, adherence to the treatment, efficacy and safety. Eleven patients were recruited between Nov 14th 2017 and Jan 16th 2018. Demographic variables: 90% Caucasian, 82% women. Clinical variables: Mean duration of AD =17.7 (±12.8), 91% had severe disease severity. At baseline, SCORAD mean score = 61.7 (±15.5); itch was reported by 100% of patients; itch Visual Analogue Scale mean range of 8 (6-10); HADS mean total score =13.9 (±5.5); DLQI mean score =13.3 (±8.3): EQ-5D-3L mean range = 57 (30-99). At week-52 there is a significant reduction of SCORAD scores, HADS total score and improved quality of life. ¡This study confirms that Dupilumab, used for 52-weeks under routine clinical practice, maintains the improved atopic dermatitis signs and symptoms obtained at week-16, with a good safety profile.

The main purpose of this paper is to present a system to detect extrusion failures in Fused Deposition Modelling (FDM) 3D printers by sensing that the filament is moving forward properly. After several years using these kind of machines, authors detected that there is not any system to detect the main problem in FDM machines. Authors thought in different sensors and used the Weighted Objectives Method, one of the most common evaluation methods, for comparing design concepts based on an overall value per design concept. Taking into account the obtained scores of each specification, the best choice for this work is the optical encoder. Once the sensor is chosen, it is necessary to design de part where it will be installed without interfering with the normal function of the machine. To do it, photogrammetry scanning methodology was employed. The developed device perfectly detects the advance of the filament without affecting the normal operation of the machine. Also, it is achieved the primary objective of the system, avoiding loss of material, energy and mechanical wear, keeping the premise of making a low-cost product that does not significantly increase the cost of the machine. This development has made it possible to use the printer with remains coil filament, which were not spent because they were not sufficient to complete an impression and also printing models in two colours with only one extruder.

The stability and harmony of ecological niches rely on intricated interactions between their members. During evolution, organisms have developed the ability to thrive in different environments taking advantage of each other’s metabolic symphonies. Among them, microalgae are a highly diverse and widely distributed group of major primary producers whose interactions with other organisms play essential roles in their habitats. Understanding the basis of these interactions is crucial to control and exploit these communities for ecological and biotechnological applications. The green microalga Chlamydomonas reinhardtii, a well-established model, is emerging as a model organism for studying a wide variety of microbial interactions with ecological and economic significance. In this review, we bring together and discuss current knowledge that points to C. reinhardtii as a model organism for studying microbial interactions.

The use of machine learning (ML) approaches to target clinical problems is called to revolutionize clinical decision-making. The success of these tools is subjected to the understanding of the intrinsic processes being used during the classical pathway by which clinicians make decisions. In a parallelism with this pathway, ML can have an impact at four levels: for data acquisition, predominantly by extracting standardized, high-quality information with the smallest possible learning curve; for feature extraction, by discharging healthcare practitioners from performing tedious measurements on raw data; for interpretation, by digesting complex, heterogeneous data in order to augment the understanding of the patient status; and for decision support, by leveraging the previous step to predict clinical outcomes, response to treatment or to recommend a specific intervention. This paper discusses the state-of-the-art, as well as the current clinical status and challenges associated with each of these tasks, together with the challenges related to the learning process, the auditability/traceability, the system infrastructure and the integration within clinical processes.

In the northern Patagonian region of Argentina, there exist some of the largest bentonite deposits. Four bentonite samples (B1, B2, B3, and B4) from two deposits were thoroughly characterized and evaluated as potential adsorbents of anthocyanins extracted from red cabbage. Anthocyanins (ACy) are natural colourants obtained from fruits and plants and have shown excellent antioxidant properties that have promising applications in health. The adsorption of ACy onto bentonites enhances their stability relative to that observed in aqueous solutions. Material characterization showed that three of the samples are sodium bentonites (Na-bentonites: B2, B3, and B4), while the fourth exhibits a large quantity of magnesium and calcium in its interlayer, classifying it as a Mg-Ca-Na-bentonite (B1). Na-bentonites demonstrated higher ACy adsorption capacities, occurring through cation exchange while Mg-Ca-Na-bentonite adsorption occurs by another kind of interaction and a cooperative adsorption mechanism, resulting in the lowest ACy adsorption. The highest adsorption capacity was for B3, characterized by the highest smectite content, cation exchange capacity, and proportion of monovalent cations in its interlayer. Under the conditions studied, sodium smectites proved to be capable of retaining red cabbage ACy, there by introducing a novel avenue for potential applications of regional materials with potential implications for health-related uses.

In birds, unlike mammals, there is no complete separation between the thoracic and abdominal cavities. Instead, they have the coelomic cavity where most main organs are found. Therefore, an adequate knowledge of the anatomy of the coelomic cavity is of great importance for veterinarians, biologists and the scientific community. This study aimed to evaluate the coelomic cavity anatomy in the Atlantic puffins (Fratercula Arctica) using anatomical sections and computed tomography images.

Background: The protocol described in this paper is part of a research project coordinated 1 between three Spanish universities where a technology aimed at improving the quality of life of 2 people suffering from cerebral palsy will be developed. Part of the technology developed will consist 3 of developing an interface and a series of applications to increase motivation for daily physical activity. 4 The basis of these developments is based on the measurement of the emotional state of the subjects. 5 Methods: The experimental protocol is designed with two objectives, on the one hand to identify the 6 emotional state through physiological signals, and on the other to determine whether music can be 7 a motivating factor to promote physical activity. It has been specifically designed for subjects with 8 cerebral palsy taking into account the special characteristics of this population. These are people with 9 whom it is difficult to use questionnaires to have a basis to contrast with the measured physiological 10 signals, so measurements must be taken in carefully chosen daily life situations Discussion: As results 11 we hope to obtain which physiological parameters are the most robust to measure the emotional state 12 and how to design rehabilitation and physical activity promotion routines that are motivating, in 13 addition to being able to avoid risk factors during the performance of these routines. Trial registration: 14 NCT05621057. https://clinicaltrials.gov/ct2/show/NCT05621057

: This paper presents a comparison between direct integer orders or classical model reference adaptive control (IO-DMRAC) versus its fractional orders counterpart (FO-DMRAC) applied to the F-16 aircraft longitudinal model pitch rate control. A substantial improvement is achieved when using fractional order adaptive control, since, in addition to performance indices, such as Integral Square-Error criterion (ISE) and Integral Square-Input criterion (ISU) being lower, the oscillations of the system output (pitch rate) in the transient period, are eliminated. Moreover, it is the first attempt in literature of adaptive control that a FO-DMRAC is applied to the pitch rate control of an aircraft. A F-16 short-period model, whose relative degree is equal to 1 (n^*=1) is analyzed by mean of simulations with good results. A FO-DMRAC is designed, for a specific operating flight conditions and compared with its IO-DMRAC counterpart. Furthermore, the boundedness of all signals, including the internal ones ω(t) are assured.

Induction machines drive many industrial processes, and their unexpected failure can cause heavy production losses. The analysis of the current spectrum can identify online the characteristic fault signatures at an early stage, avoiding unexpected breakdowns. Nevertheless, frequency domain analysis requires stable working conditions, which is not the case for wind generators, motors driving varying loads, etc. In these cases an analysis in the time-frequency domain -such as a spectrogram- is required for detecting faults signatures. The spectrogram is built using the short frequency Fourier transform, but its resolution depends critically on the time window used to generate it: short windows provide good time resolution, but poor frequency resolution, just the opposite than long windows. Therefore, the window must be adapted at each time to the shape of the expected fault harmonics, by highly skilled maintenance personnel. In this paper, this problem is solved with the design of a new multi-band window, which generates simultaneously many different narrow-band current spectrograms, and combines them into a single, high resolution one, without the need of manual adjustments. The proposed method is validated with the diagnosis of bar breakages during the start-up of a commercial induction motor.

U.S. Spanish-speaking populations experienced gaps in timely COVID-19 information during the pandemic and disproportionate misinformation exposure. Brigada Digital de Salud was established to address these gaps with culturally-tailored, Spanish-language COVID-19 information on social media. From May 1, 2021-April 30, 2023, 495 Twitter, 275 Facebook, and 254 Instagram posts were published and amplified by 10 trained community health workers. A qualitative content analysis was performed to characterize topics and formats of 251 posts. To assess reach and engagement, page analytics and advertising metrics for 287 posts were examined. Posts predominantly addressed vaccination (49.45%), infection risks (19.12%), and COVID-related scientific concepts (12.84%). Posts were educational (48.14%), and aimed to engage audiences (23.67%), promote resources (12.76%), and debunk misinformation (9.04%). Formats included images/text (55.40%), carousels (27.50%), and videos (17.10%). By June 9, 2023, 394 Facebook, 419 Instagram, and 228 Twitter followers included mostly women aged 24-54. Brigada Digital reached 386,910 people with 552,037 impressions and 96,868 engagements, including 11,292 likes, 15,240 comments/replies, 9,718 shares/retweets, and 45,381 video play-throughs. The most engaging posts included videos, trending topics, and music or audio-narration. This community-based model to engage Spanish-speaking audiences on social media with culturally-aligned content to counter misinformation shows promise for addressing public health threats.

The Smart Angel connected medical device allows ambulatory surgery patients to monitor their health by taking their own blood pressure and oxygen levels and by answering a health questionnaire from home. This preventive device must necessarily be "usable" by patients with different profiles. The objective of this article is, therefore, to better understand the links between certain characteristics of potential patients and usability. We conducted an experimental study involving thirty-six participants, investigating the effects of four patient characteristics (i.e. age, education, technophilia and health literacy) on usability measured in terms of effectiveness, efficiency, and satisfaction. The results show a moderate correlation between age, health literacy and usability. However, there is a weak correlation between technophilia and usability and no relationship between the level of education and usability. This study provides theoretical insights into the effects of user characteristics by means of personas in usability (ISO 9241-11).

Background: Deficiency of alpha-1 antitrypsin (AAT1) is a rare disorder that represents a significant health threat and early diagnostic a priority issue. We investigate the usefulness of the serum protein electrophoresis (SPE) as an opportunistic screening tool for AAT1 deficiency. Methods: For 6 months, all SPE carried out for any reasons were evaluated in our center. In those with less than 3% of Alpha-1 globulins, AAT1 concentrations were studied. The SERPINA1 gene was subsequently sequenced in those subjects displaying concentrations below 100 mg/dL. Results: Out of the total, 14 patients (0.3%) were identified with low AAT1 concentrations, 11 of them agreeing to enter the study. Of those, mutations in the SERPINA1 gene were discovered in 10 subjects (91%). Heterozygous mutations were detected in 7 patients; 3 had the c.1096G>A mutation (p.Glu366Lys; Pi*Z), 2 the c.863A>T mutation (p.Glu288Val; Pi*S), one the c.221_223delTCT mutation (p.Phe76del; Pi*Malton) having the last one the c.1066G>A (p.Ala356Thr) mutation not previously described. Finally one patient had the c.863A>T mutation in homozygosis whereas two double heterozygous patients c.863A> T/ c.1096G>A were detected. Conclusions: an altered result in the concentration of AAT1 anticipates a mutation in the SERPINA1 gene in a manner close to 91%. The relationship between a decrease in the Alpha-1 globulin band of the SPE and an alteration in the AAT1 concentration is direct in basal states of health. The SPE is presented as a highly sensitive test for opportunistic screening of AAT1 deficiency.

Post chemotherapy retroperitoneal lymph node dissection (PC-RPLND) in non-seminomatous germ-cell tumours (NSTGCTs) is a complex procedure. We evaluated whether 3D computed tomography (CT) rendering and their radiomics analysis help predict resectability by junior surgeons. The ambispective analysis was performed between 2016-2021. Prospective group (A) of 30 patients undergoing CT were segmented using 3D slicer software while retrospective group (B) of 30 patients were evaluated with conventional CT (without 3D reconstruction). CatFisher’s exact test showed a p-value of 0.13 for group A and 1.0 for Group B. Difference between proportion test showed a p-value of 0.009149 (IC 0.1-0.63). Proportion of correct classification showed a p-value of 0.645 (IC 0.55-0.87) for A, and 0.275 (IC 0.11-0.43) for Group B. Furthermore, 13 shape features were extracted: elongation, flatness, volume, sphericity, surface area, among others. Performing logistic regression with the entire dataset, n=60, the results were: Accuracy: 0.7, Precision: 0.65. Using n=30 randomly chosen, the best result obtained was Accuracy: 0.73, Precision: 0.83, with a p-value: 0.025 for Fisher's exact test. In conclusion, the results showed a significant difference in the prediction of resectability with conventional CT versus 3D reconstruction by junior surgeon versus experienced surgeon. Radiomics features used to elaborate an artificial intelligence model improve the prediction of resectability. The proposed model could be of great support in a university hospital, allowing to plan the surgery and to anticipate complications.

3D bioprinting, like 3D printing, is a process that builds structures by depositing material layer by layer. In the specific case of bioprinting, these layers are composed of a biocompatible material together with living cells, allowing the creation of three-dimensional structures that recreate functional tissues and organs. Bioprinting cell-laden structures is complicated by the high rate of cell damage and stress that occurs during the process, caused by the high pressures and stresses to which they are subjected. To minimise damage during the process, it is important to study and optimise certain bioprinting conditions beforehand and to analyse how they affect the cells by means of computational simulations. In this review, both quantitative and qualitative data are collected to improve the nozzle geometry through computational simulation studies. Optimal ranges for nozzle diameter (0.2-1mm) and length (8-10mm; 300-900μm) have been defined, and recommendations for improving nozzle performance during bioprinting, such as the provision of an inner angle of 20-30°, an inner EDTA coating and a shear stress of less than 10kPa, have been gathered. Finally, based on the data collected, a design of experiments is proposed to obtain an optimal bioprinting configuration for a particular bioink.

Abstract: Introduction: Covid-19 lockdown has caused important changes in children's routines, especially in terms of nutrition, physical activity, screen time, social activity, and school time. Regarding these changes, recent studies show that Covid-19 lockdown was associated with higher levels of anxiety and depression in children. The objective of this study was to assess changes in sleep quality in Spanish children during lockdown decreed by the Spanish government between March and June 2020. Methodology: We compared the BEAR score of 478 participants in the SENDO project at the periods before, during and after lockdown. We used hierarchical models with two levels of clustering to account for the intra-cluster correlation between siblings. Interaction of time with and a set of a priori selected variables was assessed by introducing the interaction term into the model and calculating the likelihood ratio test. Results: Mean scores in the BEAR questionnaire referred to the periods before, during, and after lockdown were 0.52 (sd 1.25), 1.43 (sd 1.99) and 1.07 (sd 1.55), respectively, showing a worsening of sleep quality as a result of confinement. Parental level of education was found to be an effect modifier (p for interaction=0.004). Children whose parents had higher education (university graduates or higher) showed a smaller worsening than those without. Conclusion: We found that the mean score in the BEAR questionnaire significantly worsened during lockdown and significantly improved after it. However, it did not reach the initial level. The mean score in the BEAR questionnaire referred to the period after lockdown was significantly higher than before.

There is a need for alternatives or complements to synthetic fertilizers to enhance agricultural sustainability. Applying organic amendments can play a significant role in this. Insect droppings show high potential, though studies evaluating their agronomic value have only recently begun to emerge. This study compared black soldier fly (Hermetia illucens) and mealworm (Tenebrio molitor) larvae frass with another organic amendment (Nutrimais) derived from composting forestry, agro-industrial, and domestic waste. The experiment also included ammonium nitrate at two rates [the same as the organic amendments, 50 kg ha–1 nitrogen (N) (FullR), and half that rate (HalfR)] and an unfertilized control. The study spanned two growth cycles of lettuce (Lactuca sativa L.) grown in pots, followed by unfertilized oats (Avena sativa L.) to assess the residual effects of the fertilizing treatments. Mealworm larvae frass mineralized rapidly, with an apparent N recovery of 37.4% over the two lettuce growth cycles, indicating its high availability to soil heterotrophic microorganisms. The average dry matter yield (DMY) of lettuce was the highest among all treatments (12.8 and 9.8 g plant–1 in the first and second lettuce cycles), even compared to the FullR treatment (12.2 and 7.8 g plant–1), though without significant differences. Although mealworm larvae frass exhibited a high mineralization rate, the DMY cannot be attributed solely to N supply, as plants in the FullR treatment showed better N nutritional status. Mealworm larvae frass provided strong evidence of a plant biostimulant effect, not explained by the variables measured in this study. Black soldier fly larvae frass exhibited typical behavior of a moderately reactive organic amendment, while Nutrimais showed low reactivity, with a near-neutral mineralization/immobilization balance. The results suggest mealworm larvae frass is recommended for early maturing vegetable crops, whereas Nutrimais appears more suitable for perennial crops with low short-term nutrient requirements.

Systemic lupus erythematosus (SLE) is an autoimmune disorder characterized by a broad array of clinical signs. In this study, we aimed to use intravenous immunoglobulins (IVIG), called intacglobin, as a monotherapy to manage SLE in three patients. Laboratory investigations for SLE diagnosis were performed, including the detection of anti-nuclear antibodies (ANA) and SLE confirmation by detecting high titers of anti-dsDNA antibodies. C3 and C4 serum levels were assessed, as well as the determination of immunoglobulins. The SLEDAI score was measured to determine whether a significant degree of disease activity existed and as a prognostic value. The evaluation of any chest infection was performed by chest-X-ray. The patients were treated with five–ten g/day of IVIG for six consecutive days, followed by five–ten g/month. Immunological evaluation demonstrated that patients presented with a flare of SLE with high titers of ANA and anti-dsDNA antibodies, low C3 and C4, and elevated immunoglobulin levels. The SLEDAI score falls from 10 to below 3, and chest infections in some patients are cleared up. The postulated mechanisms of action of IVIG demonstrated that it could be used as an immunosuppressor, immunomodulator, and antimicrobial agent in patients with SLE.

This review focuses on the role of small extracellular vesicles in the pathophysiological mechanisms of retinal degenerative diseases. Many of these mechanisms are related or modulated by the oxidative burden of the retinal cells. It has been recently demonstrated that cellular communication in the retina involves extracellular vesicles and that their rate of release and cargo features might be affected by the cellular environment and in some instances also mediated by autophagy. The fate of these vesicles is diverse, and could end up in the circulation and be used as markers, or target neighbour cells modulating gene and protein expression and eventually also angiogenesis. Neovascularization in the retina promotes vision loss in diseases such as diabetic retinopathy and age-related macular degeneration. The importance of micro RNAs, either as small extracellular vesicles’ cargo or free circulating, on the regulation of retinal angiogenesis is also discussed.

The global craft beer market is witnessing substantial growth, with a particular spotlight on sour beers. These unique brews are created through lactic fermentation initiated by lactic acid bacteria (LAB). However, the presence of hops, renowned for their antimicrobial properties, can pose a limitation within the realm of sour beer production. This research aims to explore and assess the potential of sour beer as a probiotic beverage. It involves a comparative analysis of the viability of Lacticaseibacillus paracasei subsp. paracasei F19 (F19) and 431 (L431) in a sour beer with an International Bitterness Unit (IBU) value of 26.65, alongside examining the ex-pression of genes such as horA, horB, horC, hitA, bsrA, and recA, which are associated with hop resistance. The study encompasses the development of two formulations of sour beers characterized by both high hop content and a robust probiotic count (8.44 – 8.77 log CFU/mL). The findings suggest that both probiotic strains of F19 and L431, are well-suited to produce sour beers with elevated hop levels, demonstrating excellent stability. Notably, the expression of genes responsible for hops resistance exhibited distinct modulation patterns among the two strains. It appears that a higher concentration of bsrA, as observed in strain L431, may be more effective in mitigating the effects of hop-related stress, potentially surpassing the combined expression of horA and bsrA. Nonetheless, further research is essential to validate this observation in gene expression. F19 and L431 emerge as promising candidates for the development of sour beers with increased hop intensity.

As synthetic/artificial life forms become more abundant and sophisticated, an increasing number of bizarre creatures - xenobots, robots, soft A-life entities, genetically engineered organisms, etc. - are invading our society. Therefore, we need to bring order to all this, to establish what is living and what is not. Here, I intend to classify all these non-natural entities and clarify their status with reference to their consideration or not as living beings, leaving the door open to an uncertain future in which perhaps we can see how "the artificial" and "the natural" merge to originate something new. To order all this "new biodiversity" and to also give entry to viruses (which are excluded of the three-domains tree of life), I propose the creation of a new domain, Lithbea (from the name: life-in-the-border entities), in which all these new human-made entities as well as the viruses will be included. Within this domain there would be two kingdoms, Virus and Humade (contraction of human-made), based on their origin, natural or human-made. A brief description of each component of Lithbea is included and the implications for society and biology of this “new biodiversity” is briefly discussed.

The ecosystem is an essential biological concept linking the living and the inanimate and represents the main structural and functional unit of nature. The biodiversity that exists on our planet can be organized into closely interconnected living worlds: acellular (viruses and capsidless genetic elements), prokaryotic (bacteria and archaea), and eukaryotic (all nucleated organisms). I want to highlight the presence of viruses as components of biodiversity because they are often overlooked in many studies despite their essential ecological and evolutionary role. Furthermore, I propose seven distinctive hallmarks that are inherent to any ecosystem: biodiversity, physical environment, hierarchy, interactivity, openness, “homecostasis”, and evolutionary. From the interaction and coupling of these living worlds with the environment (the environmental world), I define the ecosystem as a specific and dynamic ensemble of living and non-living worlds that functions as an open, hierarchical, and evolving system. This complex web of interactions that we call ecosystem can be graphically represented as a triangle reflecting the dynamic equilibrium between all the worlds. Finally, I propose a new way of graphically relating the ecosystem to biodiversity by taking the ecosystem as the nucleus from which all living worlds emerge.

What is life, what is the difference between something that is alive and something that is not, are viruses living beings, or what would life be like elsewhere in the universe, are questions that still do not have clear-cut answers fully accepted by the scientific community. Based on the fundamental attributes of all living things, I define life as a process that takes place in very ordered organic structures and is characterized by being automatic, interactive and evolutionary. I also define a living being as an organic, highly ordered, automatic, interacting and evolutionary system, and a robot as an ordered automatic and interacting system. Based on this definition and what we know about the biology of viruses, I maintain that they should be considered as living entities. Finally, I explain why if there were life elsewhere in the universe, it would be very similar to what we know on our planet.

We know that living matter must behave in accordance with the universal laws of physics and chemistry. However, these laws are insufficient to explain the specific characteristics of the vital phenomenon and, therefore, we need new principles, intrinsic to biology, which are the basis for developing a theoretical framework for understanding life. Here I propose what I call the seven commandments of life (the Vital Order, the Principle of Inexorability, the Central Dogma, the Tyranny of Time, the Evolutionary Imperative, the Conservative Rule, the Cooperating Thrust) as a set of principles that help us explain the vital phenomenon from an evolutionary perspective. In a metaphorical way, we can consider life like an endless race in which living beings are the runners, who are changing as the race goes on (the evolutionary process), and the commandments the rules.

Objective: To determine blood lead levels (BLL) in a healthy paediatric population and to analyse related sociodemographic, dietary and haematological factors. Methods: A cross-sectional study was made of 1,427 healthy subjects aged 1-16 years from the city of Almería (south-eastern Spain). BLL, iron parameters and erythropoietin were determined, and sociodemographic and dietary data obtained. The study data were analysed by multiple logistic regression. Results: The mean BLL was 1.98±1.1 µg/dl (95% CI:1.91–2.04). For 5.7% of the population, mean BLL was 2-5 µg/dl, for 2.1% it was >5 µg/dl and for 0.15% it was >10 µg/dl. Multivariate analysis showed that immigrant origin (OR:11.9; p<0.0001), low level of parental education (OR:4.6; p<0.02) and low dietary iron bioavailability (OR: 3.2; p<0.02) were all risk factors for toxic BLL. Subjects with toxic and non-toxic BLL presented similar iron and erythropoiesis-related parameters, except erythrocyte protoporphyrin, which was significantly higher in the BLL >5 µg/dl group. Conclusions: BLL and the prevalence of toxic BLL in healthy subjects aged 1-16 years living in south-eastern Spain are low and similar to those found in other developed countries. The factors associated with toxic BLL are immigrant origin, low level of parental education and dietary iron deficiency. The toxicity of BLL was not related to changes in the analytical parameters studied.

We present an open-source Star Tracker (ST) for Attitude Determination. Our implementation makes use of open source software of common usage in astronomy running on a Raspberry Pi 2 platform. The developed platform is open and available for parties interested in further development. Evaluation of the system showed that the ST is suitable for Cubesats of 2U or larger. The ST platform is capable of solving the Lost-In-Space (LIS) problem. Currently, the average accuracy reached of the algorithm is close to 5 seconds of arc with an average processing time of 75 seconds. However, a average accuracy of about 3 minutes of arc can be reached with 35 seconds in average processing time. We also describe the evaluation procedure, the found conclusions of this procedure, in particular the section of the algorithm where most of the processing time is spent and other possible source of errors not included in this study.

Data from NASA’s Soil Moisture Active Passive Mission (SMAP) and from the California Cooperative Oceanic Fisheries Investigations (CalCOFI) were used to examine the freshening that occurred during 2015-2016 in the Southern California Current System. Overall the freshening was found to be related to the 2014-2016 Northeast Pacific Warm Anomaly. The primary goal was to determine the feasibility of using SMAP data to observe the surface salinity signal associated with the warming. As a first step direct comparisons were done with salinity from the CalCOFI data at one-meter depth. During 2015 SMAP was saltier than CalCOFI by 0.5 PSU, but biases were reduced to < 0.1 PSU during 2016. South of 33°N, and within 100 km of the coast, SMAP was fresher in 2015 by almost 0.2 PSU. CalCOFI showed freshening of 0.1 PSU. North of 33°N SMAP and CalCOFI saw significant freshening in 2016, SMAP by 0.4 PSU and CalCOFI by 0.2 PSU. Differences between SMAP and CalCOFI are consistent with the increased stratification in 2015 and changes in the mixed layer depth.

Nanotechnology is a multidisciplinary science covering matters involving nanoscale level that is being developed for a great variety of applications. Nanomedicine is one of these attractive and challenging uses focused on the employment of nanomaterials in medical applications such as drug delivery. However, the uses of these nanometric systems requires specific parameters to establish the possible advantages and disadvantages in specific applications. This review presents the fundamental factors of nanoparticles and it´s microenvironment that must be considered to make an appropriate design for medical applications: (i) Interactions between nanoparticles and their biological environment, (ii) the interaction mechanisms, (iii) and the physicochemical properties of nanoparticles. On the other hand, the repercussions of the control, alteration and modification of these parameters in the final applications. Additionally, we here briefly report the implications of nanoparticles in nanomedicine and provide perspectives for some particular applications which still are challenged

The intricate mechanisms of the immune response elicited by vaccines and the interplay between the immune system and the central nervous system (CNS) are poorly understood. This review explores these mechanisms, emphasizing the interplay between the immune system and the central nervous system (CNS). A critical aspect is the examination of how vaccine-induced immune responses can interact with the CNS, influencing neuroinflammation and neuroimmune interactions. Furthermore, the link between vaccination and persistent symptoms observed in long-COVID patients is discussed. Vaccination initiates a complex cascade of events, starting with the production of specific proteins, such as S1/S2 spike proteins, leading to robust immune activation in the axillary lymph nodes. The role of macrophages and antigen-presenting cells (APCs) in cytokine production, antigen presentation, and the stimulation of B and T cells highlights the sophistication of the adaptive immune response. The migration of immune cell-derived exosomes to the brain plays a dynamic role in CNS inflammation, neurodegenerative processes and long COVID. On the other hand, the prolonged presence of viral and vaccine-derived spike proteins may contribute to the complex pathophysiology of Long-COVID, shedding light on the delicate balance between beneficial immune responses and possible adverse neurological outcomes of vaccination. It is worth rigorous monitoring and further research to understand the mechanisms of neuroinflammation and the persistence of spike proteins and their long-term effects on the brain, emphasising the importance of a nuanced approach to vaccine safety and efficacy in the context of COVID-19 and beyond.Principio del formulario

In this work, optimal consumption and investment strategies are derived for risk-averse investors under the 4/2 stochastic volatility class of models. We work under an expected utility (EUT) framework and consider a Constant Relative Risk Aversion (CRRA) investor, who might also be ambiguity-averse. The corresponding Hamilton-Jacobi-Bellman (HJB) and HJB-Isaacs (HJBI) equations are solved in closed-form for a subset of the parametric space and under some restrictions on the portfolio setting, for complete markets. Conditions for proper changes of measure and well defined solutions are provided. These are the first analytical solutions for the 4/2 stochastic volatility model and the embedded 3/2 model for the type of excess returns established in .

The mechanisms underlying the establishment of asymmetric structures during development remain elusive. The wing of Drosophila is asymmetric along the Anterior-Posterior (AP) axis, despite that its growth signals that drive its growth are presumably symmetric. Here, we investigated the contribution of cell recruitment, a process that drives wing fate differentiation in Drosophila, to the asymmetric shape and pattern of the adult wing. Genetic impairment of cell recruitment results in a significant reduction in adult wing asymmetry, primarily affecting the region between longitudinal vein 5 and the wing margin (L5-M). Morphometric analysis reveals that the lack of cell recruitment results in a more symmetric wing with respect to the AP, suggesting a contribution of cell recruitment to the establishment of asymmetry in the adult wing. A close examination of the expression of the wing selector gene vestigial (vg) in wing disc does not support this hypothesis. However, the circularity of the Vg pattern significantly increase in recruitment-impaired wing disc, suggesting that while the decrease of the L5-M region in the adult wing may not be attributed to cell recruitment, it could contribute to the overall asymmetry of the adult wing. We conclude that cell recruitment, a widespread mechanism that participates in growth and patterning of several developing systems, could drive, at least partially, the asymmetric shape of the Drosophila wing.

War dominated the royal policies in late Medieval Europe, yet recent historiography has shifted focus to the conflict resolution strategies employed by nonsovereign powers. This essay delves into the escalation of confrontations at sea, distinguishing between legal acts of privateering and criminal acts of piracy. It further compares the conflict mitigation policies of the town ports of Northern Iberia and the duchy of Brittany, highlighting the role of an international arbitration court, the Guild of the Contractation. The analysis concludes that attempts to diminish maritime violence through shortlived bilateral peace agreements were largely unsuccessful, with the more stringent policies of monarchical states taking precedence. Despite this, trade and maritime transport remained crucial for the inhabitants of both regions, who endeavored to surmount the perils of the sea by fostering networks of trust, bolstered by shared institutions for risk management. Nevertheless, these efforts were ultimately eclipsed by the royal policies aimed at extending state jurisdiction over the seas, through the criminalization of certain sea activities, thereby reinforcing the state's control over maritime commerce. The essay underscores the complex interplay between local interests and royal ambitions, illustrating how the latter often subsumed the former in the quest for greater control over maritime resources and trade routes.

The knowledge of COVID-19 impact on the human body has increased rapidly. Although many people recover from COVID-19, some continue to experience persistent symptoms that have been identified as Long COVID. This condition can have a severe impact on quality of life, and it remains a significant concern for medical professionals and researchers. One of the key components of the SARS-CoV-2 virus that enables it to enter human cells is the spike (S) protein. Recent studies have revealed a complex network of interactions between G proteins, spike (S) protein, and the Renin-Angiotensin System (RAS) may be responsible, at least in part, for long COVID. SARS-CoV-2 can also affect the brain, leading to neurological symptoms such as confusion, memory loss, and fatigue. Increasing evidence suggests that COVID-19 is not just a respiratory illness since it is likely that the virus could influence signal transduction pathways such as G-protein-coupled receptor (GPCR), among others, in the brain, either directly or indirectly, affecting neural functions. These interactions with the spike (S) protein and RAS, alongside the brain, are complex and require deep research to understand their implications for Long COVID-19 manifestation fully. While recent research has shed light on the complex interactions between G proteins, spike (S) protein, the brain, and the angiotensin system, this article explores these interconnected pathways and their implications for long COVID-19 manifestations. The present review summarises current research on different molecular mechanisms in Long COVID pathophysiology and may help identify possible targets or new strategies for the diagnosis and treatment.

Several studies have already demonstrated the relationship between the loss of natural habitats and the incidence of diseases caused by vectors, such as dengue, which is an acute fever disease, considered a serious public health problem. The aim of the present study was to analyze the relationship between land use changes between 2009 and 2019 and the occurrence of dengue fever in 2015 and 2019 by municipality, using the state of Minas Gerais as a case study. For this, secondary data obtained from openly available sources were used. Natural vegetation cover data were obtained from the MAPBiomas platform and dengue occurrence data from the Ministry of Health, in addition to socioeconomic indicators from the Brazilian Institute for Geography and Statistics. Between 2015 and 2019, 1,255,731 cases of dengue were recorded throughout the state of Minas Gerais, ranging from 0 to 227 per thousand inhabitants between municipalities. The occurrence of dengue was distributed throughout all regions of Minas Gerais, affected by climatic and socioeconomic aspects. In general, municipalities with net loss of natural vegetation, predominantly located in the Cerrado biome, had the highest number of dengue cases in the studied period. Despite the significant positive relationship between these two variables, three of the eight socioeconomic parameters analyzed also affected the occurrence of dengue: population density, human development index (both positively) and Gini inequality index (negatively). These results indicate that, contrary to expectations, municipalities with better social conditions had more dengue cases. Our study indicates that natural vegetation is, directly or indirectly, involved in the ecosystem service of dengue control, despite the occurrence of this disease being affected by multiple factors that interact in a complex way. Thus, policies towards reducing deforestation must be complemented by a continuous investment in public health policies and reduction of social inequalities to efficiently control dengue fever.

This short paper reveals a simple methodology to create local-correlation models suitable for the closed-form pricing of multi-asset financial derivatives. The multivariate models are built to ensure two conditions, first, marginals follow desirable processes, e.g. we choose the Geometric Brownian Motion (GBM), popular for stock prices. Second, the payoff of the derivative should follow a desired one dimensional process. These conditions lead to a specific choice of the dependence structure, in the form of a local-correlation model. Two popular multi-asset options are entertained, a spread option and a basket option.

Systemic lupus erythematosus (SLE) is a chronic idiopathic autoimmune disease affecting various organs. Patients with SLE also present numerous neuropsychiatric manifestations. These neuro-psychiatric manifestations are referred to as neuropsychiatric systemic lupus erythematosus (NPSLE). Neuropsychiatric involvement in patients with SLE was first mentioned by Kaposi more than 100 years ago and is a generic term that refers to neurological and psychiatric symp-toms resulting directly from or as a complication of SLE. NPSLE affects both the CNS and PNS and can manifest as various symptoms, such as cognitive dysfunction, organic brain syndromes, delirium, seizures, headache, and psychosis. NPSLE was previously referred to as ‘lupus cerebri-tis’ or lupus sclerosis. However, these terms are no longer recommended because there is no de-finitive pathological cause for the neuropsychiatric manifestations of SLE.[2]

In this study was found that these cancers were attributable to risk factors such as cigarette smoking, second-hand smoke, alcohol intake, excess body weight, diet, and six cancer-associated infections. Several databases were reviewed including PUBMED, Google scholar, and Web of Science. The facts suggest that a number of individuals present risk factors for cancer, which can be modifiable.

Water is a fundamental resource for ecosystems, humans, and the development of all economic sectors; it is necessary to identify and evaluate its environmental pressures or impacts. The water footprint (WF) is an appropriate indicator for the consumption of water used to produce a product. The present study uses this tool to evaluate the green and blue water requirements and the sustainability of irrigation water use for agroindustrial avocado production in Ziracuaretiro, Michoacán (2012-2021). Our analysis was based on aggregating weather and soil data at the municipal level and official government databases of avocado cultivated surface, fruit production, and water rights concessions. The analysis considers the homogeneity of information throughout the study area. We estimated that rainfed plantations require 839.03 m³/ton and irrigated plantations require 2355.80 m³/ton, with an average of 1597.47 m³/ton. In addition, we determined that avocado cultivation can demand up to 124.3% of agricultural water concessions in this municipality. In addition to the WF estimates, the analysis indicates that such studies are fundamental for decision-makers to develop and implement water use-efficiency strategies and shows the need for further research related to water consumption of avocado as a crop at more detailed scales to reduce uncertainty.

This paper presents the experimental implementations of the mathematical models and algorithms developed in Part I. Two experiments are carried out. The first experiment aims at the determinations of the correction coefficients of the mathematical model. The dot grid target is measured and the measurement data are processed by our developed and validated algorithms introduced in Part I. The values of the coefficients are indicated and analysed. Uncertainties are evaluated with implementation of the Monte Carlo method. The second experiment measures a different area of the dot grid target. The measurement results are corrected according to the coefficients determined in the first experiment. The mean residual between the measured points and their corresponding certified values reduced 29.6% after the correction. The sum of squared errors reduced 47.7%. The methods and the algorithms for raw data processing, such as data partition, fittings of dots’ centres, K-means clustering, etc., are the same for both two experiments. The experimental results demonstrate that our method for the correction of the errors produced by the movement of lateral stage of confocal microscope is meaningful and practicable.

The Western ‘discovery’ of Japanese cinema in the 1950s prompted scholars to articulate essentialist visions understanding its singularities as a result of its isolation from the rest of the World and its close links to local aesthetic and philosophical traditions. Recent approaches however, have evidenced the limitations of this paradigm of ‘national cinema’. Higson (1989) opened a critical discussion on the existing consumption, text andproduction-based approaches to this concept. This article draws on Higson´s contribution and calls into question traditional theorising of Japanese film as a national cinema. Contradictions are illustrated by assessing the other side of the ‘discovery’ of Japanese cinema: certain gendaigeki works that succeeded at the domestic box office while jidaigeki burst into European film festivals. The Taiyōzoku and subsequent Mukokuseki Action created a new postwar iconography by adapting codes of representation from Hollywood youth and western films. This article does not attempt to deny the uniqueness of this film culture, but rather seeks to highlight the need to reformulate the paradigm of national cinema in the Japanese case, and illustrate the sense in which it was created from outside, failing to recognise its reach transnational intertextuality.

Myocilin is an enigmatic glaucoma-associated glycoprotein whose biological role remains incompletely understood. To gain novel insight into its normal function, we used transposon-mediated transgenesis to generate the first zebrafish line stably overexpressing myocilin [Tg(actb1:myoc-2A-mCherry)]. qPCR showed an approximately four-fold increased myocilin expression in transgenic zebrafish embryos (144 hpf). Adult (13 months old) transgenic animals displayed variable and age-dependent ocular anterior segment alterations. Almost 60% of two-years old male, but not female, transgenic zebrafish developed enlarged eyes with severe asymmetrical and variable abnormalities in the anterior segment, characterized by corneal limbus hypertrophy, and thickening of the cornea, iris, annular ligament and lens capsule. The most severe phenotype presented small or absent ocular anterior chamber and pupils, due to iris overgrowth along with dysplastic retinal growth and optic nerve hypertrophy. Immunohistochemistry revealed increased presence of myocilin in most altered ocular tissues of adult transgenic animals, as well as signs of retinal gliosis, and expanded ganglion cells and nerve fibers. The preliminary results indicate that these cells contributed to retinal dysplasia. Visual impairment was demonstrated in all old male transgenic zebrafish. Transcriptomic analysis of the abnormal transgenic eyes identified disrupted expression of genes involved in lens, muscular and extracellular matrix activities, among other processes. In summary, the developed transgenic zebrafish provides a new tool to investigate this puzzling protein and provides evidence for the role of zebrafish myocilin in ocular anterior segment and retinal biology, through the influence of extracellular matrix organization and cellular proliferation.

Background. Shoulder in CrossFit should have a balance between mobility and stability. Glenohumeral internal rotation deficit and posterior shoulder stiffness are risk factors for overhead shoulder injury. Objective. To determine the effectiveness of instrument assisted soft tissue mobilization and horizontal adduction stretch in CrossFit practitioners’ shoulders. Methods: Twenty-one regular CrossFitters were allocated to experimental (stretching with isometric contraction and instrument assisted soft tissue mobilization) or control group (instrument assisted soft tissue mobilization). Each session lasted 5 minutes, 2 days a week, over a period of 4 weeks. Shoulder internal rotation and horizontal adduction (digital inclinometer), and posterior shoulder stretch perception (Park scale) were evaluated. Shapiro-Wilk test was used to analyze the distribution of the sample. Parametric student's t-test was used to obtain the intragroup differences. The inter- and intra-rater differences were calculated using a repeated measures ANOVA. Results. Changes were found in the experimental group following intervention (p < 0.05), and when comparing baseline and follow-up assessments (p < .05) in all variables. Significant differences were found in the control group following intervention (p < 0.05), in right horizontal adduction and left internal rotation. When comparing perception of internal rotation and horizontal adduction in both groups in the three assessments significant differences were found. Conclusions. Instrument assisted soft tissue mobilization can improve shoulder horizontal adduction and internal rotation. An instrument-assisted soft tissue mobilization technique yields the same results alone as those achieved in combination with post-isometric stretch with shoulder adduction.

Background The high incidence of diverticulitis and hemorrhoidal proctitis episodes in the population imposes an important healthcare and economic burden. Aim To determine the association between intake of certain plant foods and diverticulitis and hemorrhoidal proctitis episodes. Methods Case-control study with quantitative food frequency questionnaire focusing on selected plant foods and derived products. These were grouped by main chemical components into: ethanol, caffeine/theine/theobromine, capsaicin, alliin, acids, eugenol, and miscellaneous foods like curcumin. We quantified intake according to 24-h recall, either on a 1-4 scale (no intake, low, moderate, high intake) or as the number of units consumed (e.g. cups of tea/coffee, n of oranges or lemons); this value was multiplied by the number of reported intake days per week (1-7). Overall intake was expressed as a continuous variable obtained by successively multiplying the score for each food category, and the result was transformed into a common logarithm (range 0.3 to 27.7). Cases and controls were compared using the chi-squared test, student’s t test, odds ratio (OR) and 95% confidence interval (CI), and predictive analysis (multiple logistic regression). Results The sample included 410 cases and 401 controls, who were similar in mean age and gender distribution. The mean score for overall intake of included plant foods was 6.3 points (standard deviation [SD] 4.5), and this was significantly higher in cases (8.5 points, SD 5.3) than in controls (4.1 points, SD 1.2; p < 0.001). Overall intake was similar in cases presenting diverticulitis or hemorrhoidal proctitis. Cases had 13 times the odds of being in the upper quartile for overall intake (> 7 points) compared to controls (OR 13.2, 95% CI 8.3 to 20.8, p < 0.001). Predictive logistic regression models showed that the chemical food group most closely associated with diverticulitis and hemorrhoidal proctitis was capsaicin, followed by ethanol, eugenol, caffeine/theine/theobromine, and acids. The OR for age was near the null value. Neither alliin nor miscellaneous food groups showed any association. Conclusions High, frequent consumption of some plant foods and derived products increases the risk of presenting symptoms of diverticulitis and hemorrhoidal proctitis.

The link between the world of communication and the world of racing is provided by telemetry systems in electric racing cars. These systems send real-time data about the vehicle’s behavior and systems to enable informed decisions during the race. The aim of this research was to integrate telemetry into the battery bank of a racing electric vehicle to find the optimal values of current and voltage that optimize the charging process, thus improving the vehicle’s performance in competition using Response Surface Analysis. Particularly, the telemetry system consisted of an Arduino Mega, a digital wattmeter, and temperature sensors, all installed in the vehicle. Once the telemetry data was obtained, a response surface design was adapted with current, voltage, and temperature as factors, varying from low to high values, with the objective function being to minimize the battery’s charging time. Applying the response surface methodology and the steepest descent algorithm, it was found that all factors significantly affect the charging time, with the minimum charge time being 6961 seconds, obtained with a current of 2.4 amps and voltages of 50.5 volts and 43.6 volts.

Aim: This study aimed to carrying out a prospective survey on socio-demographics and lifestyle factors among a population of Caribbean immigrants living in the US. Materials and Methods: The data were processed and analysed using the SPSS software and Excel. Crosstabulations were done. The Chi-square test was use to evaluate different hypotheses in this study. Statistical significance was defined as p<0.05.Results: Gender was found statistically significant difference with the country of birth of the Caribbean immigrants (p=0.038), and in the cleanness of their neighbourhoods (p=0.045). There were differences in occupations between males and females (p=0.001). Males were less unemployed than females (p=0.011). Gender also showed statistically significant difference in how easy the immigrants balanced their work and personal life (p=0.044). Age groups depicted differences in the physical health of the immigrants (p=0.001). The use of alcohol and tobacco was not an important risk factor among participants (p=0.529).Conclusions: These facts suggest that socio-demographics among a population of Caribbean immigrants were significantly different among genders. However the use of tobacco and alcohol showed not significant differences among the immigrants.

Configurable process models are frequently used to represent business workflows and other discrete event systems among different branches of large organizations: they unify commonalities shared by all branches and describe their differences, at the same time. The configuration of such models is usually done manually, which is challenging. On the one hand, when the number of configurable nodes in the configurable process model grows, the size of the search space increases exponentially. On the other hand, the person performing the configuration may lack the holistic perspective to make the right choice for all configurable nodes at the same time, since choices influence each other. Nowadays, information systems that support the execution of business processes create event data reflecting how processes are performed. In this article, we propose three strategies (based on exhaustive search, genetic algorithms, and greedy heuristic) that use event data to automatically derive a process model from a configurable process model that better represents the characteristics of the process in a specific branch. These strategies have been implemented in our proposed framework, and tested in both business-like event logs as recorded in a higher educational ERP system, and a real case scenario involving a set of Dutch municipalities.

This research aims to introduce a model, SectraBank, designed to mitigate cyber fraud attacks, specifically targeting SIM Swapping and Fake App schemes in mobile banking users. A quantitative methodology with an experimental design was meticulously employed to examine the rise of cyber fraud within mobile banking. The study involved a sample of 100 professionals with advanced knowledge in Information and Communication Technologies (ICTs). Surveys were utilized to measure awareness of threats and perceptions of security before and after the implementation of the proposed model. SectraBank leverages unique user identifiers such as fingerprint authentication and the International Mobile Equipment Identity (IMEI) number, in addition to geolocation and One Time Passwords (OTP) for validating electronic transactions in mobile banking. The effectiveness of the proposed model was notable, achieving a 96.1% efficacy rate in mitigating Fake App attacks and a 90.2% success rate in countering SIM Swapping attacks. These findings underscore the potential of SectraBank as a robust solution to enhance cybersecurity measures in the realm of mobile banking.

: Aim: The aim in this study was to conduct a prospective survey regarding the sociodemographics and lifestyle risk factors for cancer of a population of Caribbean immigrants living in the U.S. Materials and Methods: The data were processed and analysed using SPSS software 27 and Excel. Crosstabulations were performed. The chi-square test was used to evaluate different hypotheses. Statistical significance was defined as p &lt; 0.05. Results: Statistically significant differences in the country of birth of the Caribbean immigrants were found for sex (p = 0.038) and the cleanness of their neighbourhoods (p = 0.045). We found differences in occupations between men and women (p = 0.001). Men were less unemployed than women (p = 0.011). Sex also showed statistically significant differences in how easily the immigrants balanced their work and personal life (p = 0.044). Age groups depicted differences in the physical health of the immigrants (p = 0.001). The use of alcohol and tobacco was not an important risk factor among participants (p = 0.529). Conclusions: These findings suggest that the sociodemographics risk factors for cancer among a population of Caribbean immigrants were significantly different between the sexes. However, the use of tobacco and alcohol showed insignificant differences among the immigrants.

The allocation of funding for higher education typically focuses on competition in neoliberal mechanisms. Surprisingly, much less attention has been paid to considering the effect of fund locations for sustainable development through public goods purposes in neoliberal contexts. This study aims to examine specific funding schemes and determine the influential factors impacting funding for teaching, research, and public goods transformation. Taking Taiwan's Higher Education Sprout Project (HESP) as an example, we explored the effect of policy initiatives on public goods transformation towards sustainable development. The data were collected from the Ministry of Education and Scopus databases. First, a regression analysis was conducted to determine which factors influence the effect of funding allocations in academic institutes. Second, we used logistic regression to detect the effects of the system and the sector. Third, we used partial least square structural equation modeling (PLS-SEM) to explore the causal effects among the selected impact variables on expected outcomes. Finally, we used the bootstrap method to demonstrate the model’s robustness. Our study found that only diversity was shown in private technology groups receiving less HESP funding. At the same time, it did not widen the differences in the sector and system in the transformation process. Our findings suggest that funding allocations will not affect teaching and research based on sectors and systems. In contrast, this study demonstrates that transforming public goods through special funding can play a critical role in leading sustainable development in higher education.

We give three new authentication schemes without secrecy. The first two on finite fields and Galois rings, using Gray map for this link. The third construction is given on Galois rings. The main achievement in this work is to obtain optimal impersonation and substitution probabilities in the schemes. Additionally, in the first and second scheme, we simplify the source space and bring a better relationship between the size of the message space and the key space than the given in [8]. Finally, we provide a third scheme on Galois rings, which generalizes the scheme over finite fields constructed in [9].

The literature on substance use usually extracts conclusions from data with correlational methods. Our study shows the usefulness of complementing ordered logistic regression (OLR) and fuzzy set qualitative comparative analysis (fsQCA) to assess factors inducing cannabis consumption in a sample of 1,935 teenagers. OLR showed a significant influence of gender (odd ratio (OR) =0.383, p<0.0001), parental monitoring (OR=0.587, p=0.0201); religiousness (OR=0.476, p=0.006); parental tolerance to substance use (OR=42.01, p<0.0001) and having close peers that consume substances (OR=5.60, p<0.0001). FsQCA has allowed fitting linkages between factors from a complementary perspective. (1) Coverage (cov) and consistency (cons) attained by solutions explaining use (cons=0.808, cov=0.357) are clearly lower than by recipes of non-use (cons=0.952, cov=0.869) (2) The interaction of gender, a tolerant family to use and the attitude toward substances by peers is very consistent to explain cannabis use. (3) The most important recipe explaining resistance to cannabis is simply parental disagreement with substance consumption (cons=0.956, cov=0.861) (4) Factors as gender, religiosity, parental monitoring and age show also a relevant impact on attitude toward cannabis use. However, whereas some of them impact symmetrically on use and non-use this does not follow in factors such as parental monitoring or age.

Cognitive scientists have paid very little attention to magic as a distinctly human activity capable of creating situations or events that are considered impossible because they violate expectations and conclude with the apparent transgression of well-established cognitive and natural laws. And even though magic techniques appeal to all known cognitive processes from sensing, attention and perception to memory and decision making, the relation between science and magic has so far been mostly unidirectional, with the primary goal of unraveling how magic works. Building up from the deconstruction of a classic magic trick, we provide here a cognitive foundation for the use of magic as a unique and largely untapped research tool to dissect cognitive processes in tasks arguably more natural than those usually exploited in artificial laboratory settings. Magicians can submerge every spectator into the precise experimental protocol they have previously designed, accounting with ease for both circumstantial and social contexts. Magicians do not base the success of their experiments in statistical measures that smear out the individual in favor of an average spectator that we know never exists in the real world. They target each and everyone in the audience and, often, with a complete accomplishment. Magicians deliver their cognitive manipulations in real-time, in tight closed-loop with the audience, and in a single trial (they cannot afford to repeat the trick if it fails). Magic has also an inherent and strong social component, merging the private cognitive processes of each spectator with the group dynamics. Finally, when combined with the wide range of precise measuring and wearable technologies available today, magic paves the way for a road not taken towards real-world cognitive science. We dare to speculate that some of the mysteries of how the brain works may be trapped in the split realities present in each magic effect.

This brief communication intends to develop critical thinking on the development at different levels that could be evaluated in the well-being of humans from the local development towards a global scale or planetary point of view. Therefore it was presented and discussed how Artificial Intelligence tools could provide important contributions and influence in the design of critical thinking to develop ideas and insights within Research as well as funding for technology transfer. In this context it should be highlighted that the generation of funding and economy for sustainability that it should be based on critical thinking and analysis of what is need it from the close surrounding towards longer distances as well as in the inversed direction. In this regard, the main axes that support it are based on the importance of entailment of individuals in their close surrounding as well as to longer physical distances and cultural differences. An in this context it should be highlighted the existence of large diversity and varied Multicultural differences. These factors could affect the developments of technology, education; level, and quality of life. Thus the Economical and development indexes could be largely varied and different between them. For this reason it should highlighted the local development within shortened times by interacting to receive or provide materials with aggregated value or non-tangible values. Therefore, it could be accelerated the process of improvement in a targeted field looking for average homogeneous development everywhere. And there, it is where the link-up and transfer strategies of technology and education by creation of varied strategies in communication media. As for example the communication plays an important role to transfer knowledge within the different social status and imagining the development of thinking that later it will be the basis for the next generation of technology. By this manner, it could be coupled different levels of educations degrees by a factor in common related with curiosity and open minds to learn, work, and live together in the context of developments of new smart manners of living where economy and new encrypted currency are involucred and provide by different manners sustainability. In these perspectives the development and education at the University and higher degrees taking into account the transmission of important factors such as; i) entailment , ii) development of knowledge, and iii) transference, is fundamental. Finally, it should be highlighted the particular need of good human relationships, emotional intelligence, and diplomacy to afford from the simplest challenges to the higher ones.

The effect of legumes adapted to a temperate climate on gas production kinetics, enteric methane, and rumen fermentation in vitro was evaluated. The species studied were Acacia dealbatha, Acacia melanoxylon, Albizzia lopantha, Lupinus pubescens, Inga insignes, Senna multiglandulosa and Tecoma stans. The effective degradation of the dry matter was estimated, the in vitro gas production was measured up to 120 hours of incubation, and the production of enteric methane, VFAs, and ammonia were measured at 24 hours. Dry matter, organic matter, ash, crude protein, neutral detergent fiber, acid detergent fiber, and acid detergent lignin were evaluated. The content of total phenols and condensed tannins was quantified. To determine digestibility, the samples were incubated for up to 120 hours. I. insignes presented a higher dry matter content and a high crude protein content. L. pubescens presented low dry matter digestibility. The neutral detergent fiber content was higher in I. insignes and with a higher value in dry matter digestibility and lower content of total phenols and condensed tannins. While S. multiglandulosa showed low detergent acid fiber content. The acid detergent lignin value was higher in I. insignes and lower in L. pubescens. In vitro gas and enteric methane production was higher in L. pubescens. propionic acid and ammonia they were higher in S. multiglandulosa. It is concluded that the amount of secondary compounds affects methane production, compromises digestibility and rumen kinetics of the legumes studied.

The orchid genus Brachystele Schltr. comprises 20 species distributed from Mexico to Argentina; 10 are found in Brazil. Anatomical studies of Orchidoideae Lindl. have been scarce, and the anatomy and histochemistry of Brachystele are still largely unknown. We characterized the vegetative organs of B. guayanensis (Lindl.) Schltr. using standard anatomical and histochemical microtechniques. Brachystele guayanensis was observed to display the anatomical characters commonly found in the vegetative organs of representatives of the Orchidaceae and Orchidoideae (including a uniseriate epidermis, thin cuticle, amphistomatic leaves, anomocytic, diacytic and tetracytic stomata, a homogeneous mesophyll, collateral vascular bundles, rhizomes with pericyclic fibers, roots with velamen, uniseriate exodermis, endodermis and pericycle). Histochemical tests confirmed the presence of lignin, proteins, and alkaloids, the lipidic nature of the cuticle, starch grains stored in spiranthosomes in the roots, and the composition of the raphides. Alkaloids were observed in great abundance, especially in the roots, and may have potentially useful medicinal activities, as has been observed in groups phylogenetically related to Brachystele.

On the 6th September at 03:08AM local time, the Iburi-Hokkaido Earthquake, only 33 km deep triggers >5,000 co-seismic mass-movements in the hills in a 25 km radius from the epicenter. Although the majority of the mass-movements occurred in complex-geometry valley with the coalescence of deposits, a small sub-set of 59 events deposited on the semi-horizontal val-ley-floor generating separated deposits that were studied in the present contribution. The aim of the present contribution was to contribute to the existing databases of empirical relationships based on planform and vertical dataset, and to define the scalars of those relations that charac-terize the mass-movements of the Iburi-Hokkaido earthquake, with the overarching goal of generating predictors for hazard-mapping. To reach these objectives, the methodology relies on LiDAR data flown in the aftermath of the earthquake as well as aerial photographs. Using Geo-graphical Information Science (GIS) tools planform and vertical parameters were extracted to calculate the power-law relations between areas and volume, between the Fahrböschung and the volume of the deposits, as well as other geometric relationships. Results have shown that the relation S=k〖V_d〗^(2/3) where S is the surface area of a deposit and Vd the volume, and k a scalar that is function of S: k=2.1842 ln⁡(S)-10.167 with a R2 of 0.52, and this relation is improved for the open-slope mass-movements but not the valley-confined ones, that present more varia-bility. The Fahrböschung for events that started as valley-confined mass-movements was Fc = -0.043ln(D) + 0.7082 with a R2 of 0.5m while for open-slope mass-movements, the Fo = -0.046ln(D) + 0.7088 with a R2 of 0.52. These results contribute to the growing co-seismic land-slide database and they can also be the base to understand the role of the counter-slopes and complex topography on the spread and distance travelled by the mass-movement deposits.

Citizen participation has always been of vital importance in decision-making processes and, likewise, joint work in the formulation and execution of projects that respond to territorial needs. This in order to ensure the best impact of public or private investment, optimizing the result and community articulation. For this reason, this investigation proposes a methodology of evaluation and prioritization of projects based on an approach integrated between the modelling in dynamics systems (SDM) and the Analytical process network (ANP), in which the citizen factors are used as qualitative and quantitative variables inside the posed balance sheet model. This is how the model developed by the Stella Architect software, it offers to the decision makers approximate information about the reality of the community, especially those who were affected by the Colombian conflict and where the expectations of a comprehensive repair could disrupt the socioeconomic system and reveal more pressing interests than those of the central government. The methodology is described by the information gotten through the participatory workshops done in the California county that belongs to the Magdalena region, this is a very affected region by the conflict in Colombia. The investigation results confirm the useful of, first of all, the use of the modelling as an information-generating tool by allowing the simulation of relevant variables in the evaluation and prioritization of projects at different moments of time and, in second place, use the knowledge of the experts that expose the ANP method for establishing the importance of each variable compared with other variables and, likewise of each project compared to the rest of the alternatives in each of the different instants of time in which the evaluation is carried out, given that the results could change in any time, the official ranking is showed after an optimization process with partial results.

The wide metabolic diversity of microalgae, their fast growth rates, and cost-effective production make these organisms highly promising resources for a variety of biotechnological applications, addressing critical needs in industry, agriculture, and medicine. The utilization of microalgae in consortia with bacteria is proving to be valuable in different biotechnological fields, including treating various types of wastewaters, producing biofertilizers, and extracting various products from their biomass. Monoculture of the microalgae Chlamydomonas has been a prominent research model for many years, extensively utilized in studying photosynthesis, sulfur and phosphorus metabolism, nitrogen metabolism, respiration, and flagella synthesis, among others. Recent re-search has increasingly recognized the potential of Chlamydomonas-bacteria consortia as a bio-technological tool for various applications. Bioremediation of wastewater using Chlamydomonas, and its bacterial consortia presents significant potential for the sustainable reduction of contam-inants, while also facilitating resource recovery and valorization of microalgal biomass. Using Chlamydomonas and its bacterial consortia as biofertilizers can offers several benefits, such as en-hancing crop yield, protecting crops, maintaining soil fertility and stability, aiding in CO2 miti-gation, and contributing to sustainable agriculture practices. Chlamydomonas-bacterial consortia play a significant role in the production of high-value products, particularly in biofuel and en-hancing H2 production. This review aims to achieve a comprehensive understanding of the po-tential of Chlamydomonas monoculture and its bacterial consortia, identifying current applications, and proposing new research and development directions to maximize its potential.

We consider an $N$ fermion system at low temperature $T$ in which we encounter special particle number values $N_m$ exhibiting special traits. These values arise in focusing attention upon the degree of mixture (DM) of the pertinent quantum states. Given the coupling constant of the Hamiltonian, the DMs stay constant for all $N$-values, but experience sudden jumps at the $N_m$. For a quantum state described by the matrix $\rho$, its purity is expressed by $Tr \rho^2$ and then the degree of mixture is given by $1 - Tr \rho^2$, a quantity that coincides with the entropy $S_q$ for $q=2$. Thus, Tsallis entropy of index two faithfully represents the degree of mixing of a state, that is, it measures the extent to which the state departs from maximal purity . Macroscopic manifestations of the degree of mixing can be observed through various physical quantities. Our present study is closely related to properties of many-fermion systemsn that are usually manipulated at zero temperature. Here we wish to study the subject at finite temperature. Gibbs' ensemble is appealed to. Some interesting insights are thereby gained.

Differences are introduced as outputs of linear systems called differencers, being considered two classes: shift and scale-invariant. Several types are presented, namely: nabla and delta, bilateral, tempered, bilinear, stretching, and shrinking. Both continuous and discrete-time are described. ARMA type systems based on differencers are introduced and exemplified. In passing, the incorrectness of the usual delta difference is shown.

This paper discusses the concept of fractional derivative with complex order from the application point of view. It is shown that a fractional derivative is hermitian, if and only if the order is real. The hermitian part of complex order derivatives behave like allpass filters with almost logarithmic phase.

This paper investigates pseudo-polymorphism in 2-pyridylmethoxy derivatives of p-tert-butylcalix[4]arene (PyC4), p-tert-butyldihomooxa-calix[4]arenes (PyHOC4), and p-tert-butylhexahomotrioxacalix[3]arenes (PyHO3C3), presenting 11 crystal structures with 15 crystallographically independent molecules. The macrocycle of PyC4 is smaller and less flexible with respect to those of PyHOC4 and PyHO3C3 and in solution, the cone conformation of these three molecules exhibit different point symmetries: C4, Cs and C3, respectively. A correlation is observed between the macrocycle's structural rigidity and the number of pseudo-polymorphs formed. The more rigid PyC4 displays a higher number (6) of pseudo-polymorphs compared to PyHOC4 and PyHO3C3, which exhibit a smaller number of crystalline forms (3 and 2, respectively). The X-ray structures obtained show that the conformation of the macrorings is primarily influenced by the presence of an acetonitrile guest molecule within the cavity, with limited impact from crystal packing and intermolecular cocrystallized solvent molecules. Notably, both calix[4]arene derivatives produce host-guest complex with acetonitrile, while the most flexible and less aromatic PyHO3C3 do not give crystals with acetonitrile as guest. Intertwined 1D and 2D solvent channel networks were observed in the PyHOC4-hexane and in the PyHO3C3-H2O-MeOH crystal structures, respectively, while the other pseudopolymorphs of PyHOC4 and PyHO3C3 and all PyC4 crystal forms exhibit a closely packed crystal structures without open channels.

This study investigates the vertical structure of the dynamical properties of a warm-core ring in the Gulf of Mexico (Loop Current ring) using glider observations. We introduce a new method to correct the glider’s along-track coordinate which is, in general, biased by the unsteady relative movements of the glider and the eddy, yielding large errors on horizontal derivatives. Here, we take advantage of the synopticity of satellite along-track altimetry to apply corrections on the glider’s position, by matching in situ steric height with satellite-measured sea surface height. This relocation method allows to recover the eddy’s azimuthal symmetry, to precisely estimate the rotation axis position, and to compute reliable horizontal derivatives. It is shown to be particularly appropriate to compute the eddy’s cyclo-geostrophic velocity, relative vorticity, and shear strain, which are otherwise out of reach when using the glider’s raw traveled distance as an horizontal coordinate. The Ertel potential vorticity (PV) structure of the warm core ring is studied in details, and we show that the PV anomaly is entirely controlled by vortex stretching. Sign reversal of the PV gradient across the water column suggests that the ring might be baroclinically unstable. The PV gradient is also largely controlled by gradients of the vortex stretching term. We also show that the ring’s total energy partition is strongly skewed, with available potential energy being 3 times larger than kinetic energy. The possible impact of this energy distribution on the Loop Current rings longevity is also discussed.

A very high parking occupancy can negatively influence the traffic performance of an area by causing very long cruising times. A very low parking occupancy, on the other hand, is inefficient from a space utilization perspective. Thus, this paper proposes a framework to compute the optimal parking occupancy rate over a given time horizon based on a macroscopic traffic and parking model. This rate is set high enough to ensure an efficient usage of the parking infrastructure. However, it should also guarantee a high likelihood of finding parking in order to eliminate the drivers’ time wasted in cruising for parking and the added congestion it causes. The model outputs are based on small data collection efforts and low computational costs, and they can be generated without complex simulation software using a simple numerical solver. Multiple vehicle types are included into our methodology allowing us to generate insights about the optimal parking occupancy with or without differentiated parking (i.e., parking for specific vehicles, such as fuel and electric vehicles). In times of a modal shift towards electric vehicles, cities can use our model to evaluate how much parking supply (with battery charging opportunities) they would like to dedicate to electric vehicles in order to achieve optimal traffic and parking results, and whether a differentiated or semi-differentiated parking policy is desirable. We illustrate our framework in a case study of a central area within the city of Zurich, Switzerland, showing the traffic and parking impacts (e.g., average searching time for parking, total revenue created by parking fees, optimal parking occupancy rate) for different proportions of fuel and electric vehicles in the parking demand and/or supply. Our results confirm that optimal occupancy rates are between and for most realistic scenarios. We then discuss how these rates might change depending on various demand and supply relationships, and according to different parking policies. We show that equal proportions between electric vehicles in the demand and their parking spaces in the supply lead to the best traffic performance in the area. We also provide the tools for cities to analyze their loss in performance if they do not react, e.g., to an increasing demand for electric vehicles over time. Moreover, we illustrate how some of these risks can be mitigated by having more flexible parking policies, e.g., allowing electric vehicles to use parking spaces for fuel vehicles.

Toxoplasma gondii, a protozoan parasite with the ability to infect various warm-blooded vertebrates, including humans, is the causative agent of toxoplasmosis. This infection poses significant risks, leading to severe complications in immunocompromised individuals and potentially affecting the fetus through congenital transmission. A comprehensive understanding of the intricate molecular interactions between T. gondii and its host is pivotal for the development of effective therapeutic strategies. This review emphasizes the crucial role of proteomics in T. gondii research, with a specific focus on host-parasite interactions, post-translational modifications (PTMs), PTM crosstalk, and ongoing efforts in drug discovery. Additionally, we provide an overview of recent advancements in proteomics techniques, encompassing interactome sample preparation methods such as BioID, APEX, and Y2H, as well as various proteomics approaches, including single-cell analysis, DIA, targeted, top-down, and plasma proteomics. Furthermore, we discuss the integration of proteomics with other omics technologies, highlighting its potential in unraveling the intricate mechanisms of T. gondii pathogenesis and identifying novel therapeutic targets.

In this study, using information theory tools, we investigate the quantum degree of mixedness, particle number fluctuations, and temperature variations in the paradigmatic Lipkin model, focusing on the interplay between these factors in a system of many fermions. Our analysis reveals intriguing dependencies of quantum mixedness on the total fermion number, showcasing distinct behaviors at different temperatures. Notably, we find that the degree of quantum mixedness exhibits a strong dependence on the total fermion number, with varying trends observed across different temperature regimes. Remarkably, this dependence remains unaffected by the strength of the fermion-fermion interaction (if it does not vanish, of course), underscoring the robustness of the observed phenomena. Through comprehensive numerical simulations, we provide illustrative graphs that depict these dependencies, offering valuable insights into the fundamental characteristics of many-fermion systems. Our findings shed light on the intricate dynamics of quantum degree of mixedness and particle number fluctuations in fermionic systems, with potential implications for diverse fields ranging from condensed matter physics to quantum information science.

The extensive metabolic diversity of microalgae, coupled with their rapid growth rates and cost-effective production, position these organisms as highly promising resources for a wide range of biotechnological applications. These characteristics allow microalgae to address crucial needs in both the agricultural, medical, and industrial sectors. Microalgae are proving to be val-uable in various fields, including the remediation of diverse wastewater types, the production of biofuels and biofertilizers, and the extraction of various products from their biomass. For decades, the microalga Chlamydomonas has been widely used as a fundamental research model organism in various areas such as photosynthesis, respiration, sulfur and phosphorus metabolism, nitrogen metabolism, and flagella synthesis, among others. However, in recent years, the potential of Chlamydomonas as a biotechnological tool for bioremediation, biofertilization, biomass, and bio-products production has been increasingly recognized. Bioremediation of wastewater using Chlamydomonas presents significant potential for sustainable reduction of contaminants and fa-cilitates resource recovery and valorization of microalgal biomass, offering important economic benefits. Chlamydomonas has also established itself as a platform for the production of a wide va-riety of biotechnologically interesting products, such as different types of biofuels, and high-value-added products. The aim of this review is to achieve a comprehensive understanding of the potential of Chlamydomonas in these aspects, and to explore their interrelationship, which would offer significant environmental and biotechnological advantages.

The ceramic sherds from approximately 20 samples of lead-glazed tableware, recovered from diverse archaeological sites, including three repurposed storage pits transformed into dumpsters within the medieval city of Santarém (13th-14th century), underwent a meticulous examination. This investigation utilized techniques such as micro-Raman, ground state diffuse reflectance absorption, and X-ray fluorescence spectroscopies, in addition to X-ray diffraction and stereomicroscopy. A parallel study was conducted on contemporaneous European ceramics (glazed sherds) sourced from archaeological sites dating back to the 13th-15th centuries in Saintonge (France), Ardenne, Zomergem, and Bruges (Belgium), as well as Surrey-Hampshire, Kingston, and Cheam (England). The colour of the ceramic bodies is predominantly white or whitish, with a few exhibiting a vivid red hue. Ceramic sherds with a light paste composition were likely crafted using kaolin clays as raw materials. Analyses of fabric, mineralogical, and elemental composition of the sherds suggest that the majority of Santarém's glazed ceramics were locally or regionally produced, potentially derived from a Pliocene kaolin-rich sand formation. However, this conclusion is not supported by the absence of discovered lead glaze kilns or workshops in Santarém for the late Middle Ages. A distinctive feature from the European workshop ceramics lies in the quartz temper content and fabric.

Opossums, native to the Americas, are unique marsupials with over 100 species. The Common Opossum and Virginia Opossum are notable species. They are nocturnal, omnivorous, and adapt to various habitats. Their reproduction involves a short gestation and marsupial pouch development. Despite their ecological benefits like seed dispersal and insect control, their proximity to human habitats exposes them to pathogens, posing public health risks. These include protozoa, helminths, and arthropods that can spread zoonotic parasites and vector-borne diseases. The marsupial immune system, including opossums, is complex, rivaling eutherian mammals. Key immune genes were identified in the grey short-tailed opossum genome. CD1 protein and VpreB surrogate light chain were also found. Marsupials are proposed as ideal models for studying developmental immunology. A West Indian opossum (Didelphis marsupialis) was found and examined. Blood tests revealed abnormalities, including a low white blood cell count and signs of anemia. The results contribute to understanding the species’ health and adaptability in the wild.

Soil management in orchards can have several economic and environmental implications. In this study, three different soil management systems were compared in a dry-farmed olive grove: conventional tillage (Tillage), glyphosate-based herbicide (Herbicide) and Sheep Walking. The experiment lasted eleven years (2011-2022) and was carried out after a previous trial conducted on the same plot with the same treatments and duration (2001-2011). However, in the earlier trial, the Herbicide and Sheep Walking treatments switched positions in the plot, while the tillage treatment remained in its original place. The average total accumulated olive yields between 2011 and 2022 were 225.1, 230.9, and 245.0 kg tree–1 for the Sheep Walking, Tillage, and Herbicide treatments, respectively. However, no significant differences were observed between the treatments. The levels of total organic carbon in the soil, measured in samples collected in the last year of the study, were 41.3, 33.7, and 37.3 g kg–1, respectively for the same treatments. These findings indicated that the Tillage treatment exhibited lower soil organic matter content and reduced bioavailability of some nutrients, which raises concerns about its sustainability. On the contrary, employing Sheep Walking with an appropriate stocking rate, effectively controlling vegetation in the spring, ensured favourable soil properties and olive yields comparable to the other treatments. Moreover, the Sheep Walking approach provides supplementary advantages to the farmer, including revenue from the sale of animal products and the opportunity to transition to organic farming systems, which better align with the preferences of contemporary societies.

This article presents a review of resources for batteries with a specific focus on sustainability aspects related to raw materials, electrode and electrolyte chemistries suitable for the automobile industry. We emphasize the importance of prioritizing sustainability in battery technology evolution, which is expected to shift towards earth-abundant materials. One notable advancement in this direction is the utilization of glass solid-state electrolytes, known for their high ionic conductivity, low electronic conductivity, and high dielectric constant. However, our review suggests that further research should explore synthesis methods to modify anisotropic properties, enhancing the performance of solid-state electrolytes, particularly in facilitating the flow of ions.

Undergraduate learning is a multifaceted concept that many researchers have investigated to promote student engagement, academic performance, etc. Exploring factors promoting learning among undergraduates in FYW programs, which are required for undergraduates might potentially contribute to sustainable, cross-disciplinary undergraduate education. This study used the 10-year longitudinal grade and survey data at San José State University (SJSU) and the data was collected from Academic Years (AYs) 2015 to 2020, and five student surveys constituted the sample size of 18,101 students. In 2016, SJSU changed the remedial writing course to college writing courses. Since then, students need to complete an online module course before placing themselves into a one-semester or two-semester writing course. The previous study showed that students with higher writing comfort and confidence tend to place themselves into a semester-long class. Regression analysis was applied to examine the relationships among factors promoting learning among those students. University admitted students from various diversity and backgrounds, the results of this study suggested that what students chose and persisted in were more important in advancing their academic success rather than prior learning experience or psychological factors before the class.

The relationship between religion and politics is a constant in the history of humanity. In the specific case of Western culture, it is possible to trace an archeology of the political as an effect of theological-political devices (essentially Christian-inspired). If we add to this the evolution of politics, in modern times, towards biopolitics, then the relationship focuses on very concrete topics. This is the case of the immunological process – from a personal, social, and philosophical perspective – thoroughly analyzed by Italian philosopher Roberto Esposito. In the context of his philosophical immunology, the place of religion is mainly archaeological and is interpreted critically. This article also aims to critically analyze his position, proposing a reading close to his thought but which is, at the same time, somewhat different.

Polyolefin fibre reinforced concrete (PFRC) has become an attractive alternative to steel for the reinforcement of concrete elements mainly due to its chemical stability and the residual strengths that can be reached with lower weights. The use of polyolefin fibres can meet the requirements in the standards, although the main constitutive relations are based on the experience with steel fibres. Therefore, the structural contributions of the fibres should be assessed by inverse analysis. In this study, the fibre dosage has been fixed at 6kg/m³ and both self-compacting concrete and conventional concrete have been used to compare the influence of the positioning of the fibres. An idealized homogeneous distribution of the fibres with such fibres crossing from side to side of the specimen has been added to self-compacting concrete. The experimental results of three-point bending tests on notched specimens have been reproduced by using the cohesive crack approach. Hence, the constitutive relations were found. The significance of this research relies on the verification of the formulations found to build the constitutive relations. Moreover, with these results it is possible to establish the higher threshold of the performance of PFRC and the difficulties of limiting the first unloading branch typical of fracture tests of PFRC.

Natural rocks are highly heterogeneous due to various geological processes that constantly alter their properties. The accumulation, deposition, and cementation of mineral and organic particles continuously modify the spatial characteristics of rock properties. Property variability or anisotropy is commonly observed in most rock types and influences strength, transport, and thermal conductivity behavior. This unpredictability presents a significant challenge for laboratory testing. Binder-jet additive manufacturing (3D printing) has emerged as a valuable technology for characterizing rock properties in geoscience and engineering. This study proposes a methodology to evaluate the variability and repeatability of mechanical properties of 3D-printed sandstones during binder-jet additive manufacturing. The mechanical properties were analyzed statistically for samples located in various parts of the 3D printer build volume. The results showed that the 3D-printed sandstones exhibited significant variations in their strength and stiffness properties when measured from samples produced within the same build volume during binder-jet additive manufacturing. The Uniaxial Compressive Strength (UCS) varied from 23 to 38 MPa, with an average value of 29 MPa. The Young's modulus, on the other hand, ranged from 1.5 to 4.05 GPa, with an average value of 2.33 GPa. The variability of the mechanical properties, quantified by the standard deviation, decreased when the entire population of 3D-printed sandstones was divided into smaller samples situated at different elevations of the build platform.

Entrepreneurship has been viewed as an opportunity for economic development and changing economic scenarios in global markets. Women are viewed as a reservoir of entrepreneurial talent, so they can be growth engines in novel markets. Previous studies have considered entrepreneurship as the most effective way towards the economic empowerment of women. Female students engaged in entrepreneurial education have been addressed persistently, while what transforms them in an education process is still unclear. Considering the transforming global economy and its influence on higher education, this study aims to detect female students transforming entrepreneurial competency, mindset, and intention into sustainable entrepreneurship. Using a self-compiled survey, we targeted 752 female students to investigate their entrepreneurial competency, mindset, and intention. SPSS and AMOS were used to transform the data for interpretation. We assumed that the impact of female students’ entrepreneurial competency could be modified by an entrepreneurial mindset and result in entrepreneurial intention. To detect this causal relationship, this study employed reliability, factor, structural equation modeling (SEM), and bootstrap-ping analyses to verify the evidence. The result of the SEM confirms that female students’ entrepreneurial competency will, through their entrepreneurial mindset, impact entrepreneurial intention. With bootstrapping, 5000 samples were collected, and it was demonstrated that the measure constructs were still reliable in the model. This study found that there is a mediation effect between entrepreneurial competency and entrepreneurial intention. The entrepreneurial mindset plays a crucial role in the transformation process. Without an entrepreneurial mindset, entrepreneurial competency cannot exert a significant effect on entrepreneurial intention. The findings can help reinvent related entrepreneurial education in higher education.

Centropomus undecimalis (common snook, sergeant fish or robalo) and Centropomus parallelus (fat snook, smallscale fat snook, little snook or chucumite) have tropical and subtropical wide distribution from southern Florida (Gulf of Mexico) to southern Brazil (Rio Grande do Sul) waters, and due the value of their flesh, these species have been explored with predatory fishing, generating a deficiency for their conservation. Adequate conservation of this species depends on population genetic parameters. Thus, in this study, we used microsatellite markers to investigate the genetic variability and the genetic characterization of C. undecimalis and C. parallelus populations, identifying if the citations species are geographically connected, using 10 loci of microsatellites, bringing strategies of management, sustainability, and conservation for species citations, and providing genetic subsidies needed to be used in breeding programs for snooks. Microsatellite molecular genetic markers were efficient in the study of the genetic variability of the samples of C. parallelus and C. undecimalis, resulting in data on the genetic structuring of these populations, thus aiding in their management and conservation. The data presented may provide subsidies for future use in programs aimed at animal breeding of sea bass, establishing tools for use in fish farming. In addition, despite being two species that are not on the endangered list, we can observe that there are genetic differences between the studied populations of the same species.