We study the μ-μ45-T phase diagram of the 2+1-dimensional Gross-Neveu model, where μ denotes the ordinary chemical potential, μ45 the chiral chemical potential and T the temperature. We use the mean-field approximation and two different lattice regularizations with naive chiral fermions. An inhomogeneous phase at finite lattice spacing is found for one of the two regularizations. Our results suggest that there is no inhomogeneous phase in the continuum limit. We show that a chiral chemical potential is equivalent to an isospin chemical potential. Thus, all results presented in this work can also be interpreted in the context of isospin imbalance.

Predicting how a genetic change affects a given character is a major challenge in biology, and being able to tackle this problem relies on our ability to develop realistic models of gene networks. However, such models are rarely tractable mathematically. In this paper, we propose a mathematical analysis of the sigmoid variant of the Wagner gene-network model. By considering the simplest case, that is, one unique self-regulating gene, we show that numerical simulations are not the only tool available to study such models: theoretical studies can be done too, by mathematical analysis of discrete dynamical systems. It is first shown that the particular sigmoid function can be theoretically investigated. Secondly, we provide an illustration on how to apply such investigations in the case of the dynamical system representing the one self-regulating gene.

Atopic dermatitis (AD) is a chronic and allergic skin disease, however, there is no cure for the disease. Many studies have shown anti-AD potentials of red ginseng, while red ginseng marc (RGM) remained after the ginseng extraction is discarded as industrial waste. However, it is recently reported that RGM, particularly fermented RGM (fRGM), still contains the bioactive properties. Thus, anti-allergic effects of fRGM were examined in 2,4-dinitrochlorobenzene-induced AD-like mice model. The model was topically treated with distilled water (control), dexamethasone, or fRGM for six weeks. The treatments of fRGM alleviated the skin lesions and reduced serum IgE levels, compared with the control. The fRGM also reduced skin levels of lipid peroxidation and superoxide anion, however, increased glutathione contents, with down-regulated gene expressions for inflammatory mediators. The histopathological analyses demonstrated that fRGM suppressed the epidermal thickening, collagen deposition, and inflammatory cell and mast cell infiltration, which involved the anti-inflammatory, anti-oxidant, and anti-apoptotic effects. Further, fRGM suppressed hypertrophic changes and inflammatory responses in the spleen and lymph node. The beneficial effects were observed in the dexamethasone and fRGM groups, however, the antioxidant effects were evident only in the fRGM treatments. These provide useful information for developing fRGM as therapeutic sources for AD.

TThe number of supermarkets offering a grocery delivery has been increasing during the last years. Many studies deduce CO₂ emission savings using this concept. Since the delivery of groceries also consumes energy and produces emissions, break-even points can be calculated, from where the delivery has environmental advantages compared to the customer pickup. In this paper, influences of differing vehicle use on break-even points for savings of energy and CO₂ emissions are analyzed for the case of Haidhausen Süd, a city district of Munich in Germany. Internal combustion engine and electric vehicles are investigated to depict current as well as future trends. After an introduction to the used methodology, the potential to save energy and CO₂ emissions related to the delivery of groceries in the chosen district of Munich is evaluated. Afterwards, influences on the break even points are presented and discussed. As the results show, a delivery of groceries leads to energy and carbon dioxide savings in a wide range of private vehicle use for grocery shopping trips. Nevertheless, if the complete customer vehicle fleet is electrified, the use of delivery vehicles with an internal combustion engine can cause an additional environmental impact at the current modal split for shopping trips in Germany.

Since the outbreak of SARS CoV-2 infection (Covid-19), healthcare professionals worldwide have been trying to find disease management and control alternatives to encourage immunotherapies. Immunotherapy is an efficient therapeutic option used against comparable viral contaminations such as MERS-CoV and SARS-CoV. The aim of the current study is to assess the existing knowledge associated with SARS-CoV-2 immunotherapy. Information available in published articles and their quality highlights the importance of following strict scientific rules for clinical outcomes. Thus, these studies have shown enough data to confirm that immunomodulation is the main topic investigated in research about Covid-19 therapy. Therefore, it is possible saying that immunotherapy is certainly the appropriate option against this virus.

The modeling of tilting-pad journal and thrust bearings presents a level of complexity beyond that of bearings of fixed-arc geometry, particularly with regard to dynamic influences. With tilting-pad bearings, the theory surrounding the fluid film must be complemented with representative modeling of the pad dynamics. What has been recognized in recent decades has been the significance of the pad support, in particular the flexibility of the pivot region of the pad. The typical model for including the stiffness of the pivot has been based on Hertzian contact theory. Some researchers have been noting that the Hertzian theory does not permit sufficient flexibility in the pivot region. It is suggested that the contact mechanics at the pivot would be better represented as a pairing of rough surfaces. The modeling used here is based on a statistical asperity micro-contact theory for rough-surface line contact that has been extended to include contact stiffness. This model has been applied to the determination of the effective dynamic properties of tilting-pad bearings. The results show that pivot stiffness can be as low as one-third the stiffness determined by Hertzian theory. Comparison to published experimental results confirms the significance of the rough-surface modeling, particularly for the line contacts associated with rocker-back tilting pads.

Two welcome extensions of evolutionary thinking have come to prominence over the last thirty years: the so-called “extended evolutionary synthesis” (EES) and debate about biological kinds and individuals. These two agendas have, however, remained orthogonal to one another. The EES has mostly restricted itself to widening the explanations of adaptation offered by the preceding “modern evolutionary synthesis” by including additional mechanisms of inheritance and variation; while discussion of biological kinds has turned toward philosophical questions of essential vs. contingent properties of life forms and realist vs. epistemological approaches to categorization and classification. Here we attempt to broaden the explanatory scope of evolutionary theory by linking these two agendas. We expand on the mechanistic orientation of the EES, using new understandings of networked systems of components in order to engage the distinct intellectual challenge of the origination of historical kinds. With this phrase we designate a subset of natural kinds that acquires, through evolutionary processes, a quasi-independent lineage-history. Such kinds emerge in both biology and culture, and we enlarge the limited number of historical kinds that have thus far been recognized in evolutionary biology in a series of paradigmatic exemplars, from genes and cell types to rituals and music. For each exemplar we discern specific mechanisms by which it arose and persists; comparing these, we suggest a general unity in the ways in which diverse historical kinds originate.

Since its inception, evolutionary theory has experienced a number of extensions. The most important of these took the forms of the Modern Evolutionary Synthesis (MES), embracing genetics and population biology in the early 20^th century, and the Extended Evolutionary Synthesis (EES) of the last thirty years, embracing, among other factors, non-genetic forms of inheritance. While we appreciate the motivation for this recent extension, we argue that it does not go far enough, since it restricts itself to widening explanations of adaptation by adding mechanisms of inheritance and variation. A more thoroughgoing extension is needed, one that widens the explanatory scope of evolutionary theory. In addition to adaptation and its various mechanisms, evolutionary theory must recognize as a distinct intellectual challenge the origin of what we call “historical kinds.” Under historical kinds we include any process that acquires a quasi-independent and traceable lineage-history in biological and cultural evolution. We develop the notion of a historical kind in a series of paradigmatic exemplars, from genes and homologues to rituals and music, and we propose a preliminary characterization.

Biological membranes are fascinating. Santiago Ramón y Cajal, who received the Nobel prize in 1906 together with Camillo Golgi for their work on the nervous system, wrote “[..]in the study of this membrane[..] I felt more profoundly than in any other subject of study the shuddering sensation of the unfathomable mystery of life”[1]. The visualization and conceptualization of these biological objects have profoundly shaped many aspects of modern biology, drawing inspiration from experiments, computer simulations, as well as from the imagination of scientists and artists. The aim of this review is to provide a fresh look on current ideas of biological membrane organization and dynamics by discussing selected examples across fields [1] The full quotation is “I must not conceal the fact that in the study of this membrane I for the first time felt my faith in Darwinism (hypothesis of natural selection) weakened, being amazed and confounded by the supreme constructive ingenuity revealed not only in the retina and in the dioptric apparatus of the vertebrates but even in the meanest insect eye. There, in fine, I felt more profoundly than in any other subject of study the shuddering sensation of the unfathomable mystery of life.” from the autobiography Recollections of My Life.

Biological function depends on the composition as well as structure of the organism, that is the organization of interactions between its parts. In multicellular organisms, the complex communication between cells is crucial for the coordination of cellular functions (growth, differentiation, apoptosis), compartmentalization of cellular processes within the organism, and the integration of cells into functioning higher levels of structural organization. Here we focus on the interaction among cells, as the basic level of biological organization, capable of a remarkable degree of autonomy and self-maintenance. While a wealth of data on putative cell interactions has recently become available, its biological interpretation depends on expectations we have for the structure of these interaction networks. This contribution is an attempt at formulating basic questions we may ask about cell interaction data. We build on the understanding that cells fulfill two general functions: the integrity-maintaining and the organismal service function. We derive the expected patterns of cell interactions considering two intertwined aspects: the immediate functional and the evolutionary. Based on these, we propose several guidelines for analysis and interpretation of transcriptional cell-interactome data.

A body plan is a stable configuration of characters for a major taxonomic group, such as chordates or arthropods. Despite widespread casual reliance on the concept for guiding comparisons within and between groups, the nature of body plans as well as the biological causes underlying their evolution have remained elusive. This paper proposes an abstract mechanistic model of body plan identity. We hypothesize that body plans are an evolutionary phenomenon that only applies to a relatively small subset of major clades, rather than being associated with each and every so-called “phylum.” Body plans arise in evolution by stepwise accretion, and require a level of developmental complexity that is only found in some animal clades. Further, we suggest that, parallel to the developmental mechanisms controlling character identity, there are “body plan identity mechanisms” (BpIMs) that maintain entire configurations of characters while possessing a mechanistic architecture that is itself stable and traceable through evolutionary change. These BpIMs, we suggest, are entrenched intercellular signaling networks operating between transient embryonic structures that are destined to differentiate into distinct individualized characters. The activity of a BpIM results in a transient long-range integration of the embryo that is highly sensitive to genetic and environmental perturbations, and that can be detected morphologically as a conserved phylotypic stage. This model is illustrated with detailed interpretations of the notochord signaling system and the segment polarity network as candidate BpIMs in vertebrates and arthropods, respectively. We conclude by contrasting the proposed developmental-mechanistic conception of body plans with the phylogenetic notion of ground plans, and sketch the general outlines of an empirical research program on body plan evolution.

Embryo implantation is a hallmark of the female reproductive biology of eutherian (placental) mammals and does not exist in a sustainable form in any other vertebrate group. Implantation is the initial process that leads to a sustained fetal-maternal unit engendering a complex functional relationship between the mother and the embryo/fetus. The nature of this relationship is often portrayed as one of conflict between an aggressive embryo and a passive or defensive maternal organism. Recent progress in elucidating the evolutionary origin of eutherian pregnancy leads to a different picture. The emerging scenario suggests that the very initial stages in the evolution of embryo implantation require evolutionary changes to the maternal physiology, which modified an ancestral generic mucosal inflammation in response to the presence of the embryo into an active embedding process. This “female-first” evolutionary scenario also explains the role of endometrial receptivity in human pregnancy. On the marsupial side, where in most animals the fetal-maternal interaction is short and does not lead to a long term sustainable placentation, the relationship is mutual. In these mammals uterine inflammation is followed by parturition in short order. The inflammatory signaling pathways, however, are cooperative, i.e. they are performed by both the fetus and the mother and therefore we call this relationship “cooperative inflammation.” Based on these discoveries we reconceive the narrative of the maternal-fetal relationship.

For more than half a century, Manfred Deistler has been contributing to the construction of the rigorous theoretical foundations of the statistical analysis of time series and more general stochastic processes. Half a century of unremitting activity is not easily summarized in a few pages. In this short note, we chose to concentrate on a relatively little-known aspect of Manfred's contribution which nevertheless had quite an impact on the development of one of the most powerful tools of contemporary time series and econometrics: dynamic factor models.

There is a continuous growth of heat pump installations in residential buildings in Germany. The heat pumps were not only used for space heating and domestic hot water consumption but also to offer flexibility to the grid. the high coefficient of performance and the low cost of heat storages made the heat pumps an optimal candidate for the power to heat applications. Thus, several questions are raised about the optimal integration and control of the heat pump system with buffer storages to maximize its operation efficiency and minimize the operation costs. In this paper, an experimental investigation is performed to study the performance of a ground source heat pump (GSHP) with a combi-storage under several configurations and control factors. The experiments were performed on an innovative modular testbed that is capable of emulating a ground source to provide the heat pump with different temperature levels at different times of the day. Moreover, it can emulate the different building loads such as the space heating load and the domestic hot water consumption in real-time. The data gathered from the testbed and different experimental studies were used to develop a simulation model based on Modelica that can accurately simulate the dynamics of a GSHP in a building. The model was validated based on different metrics. Energetically, the difference between the developed model and the measured values was only 3.08\% and 4.18\% for the heat generation and electricity consumption, respectively.

We discuss a remote sensing system that is used to simultaneously detect range-resolved differential absorption LIDAR (light detection and ranging; DIAL) signals and integrated path DIAL signals (IP-DIAL) from aerosol targets for ranges up to 22 km. The DIAL/IP-DIAL frequency converter consists of an OPO pumped at 1064 nm to produce light at 1.6 μm and operates at 100 Hz pulse repetition frequency. The probe light is free space coupled to a movable platform that contains one transmitter and two receiver telescopes. Hybrid photon counting/current systems increase the dynamic range for detection by two orders of magnitude. Range resolved and column integrated dry-air CO2 and CH4 mixing ratios are obtained from line shape fits of CO2 and CH4 centered at 1602.2 nm and 1645.5 nm, respectively and measured at 10 different frequencies over ≈ 1.5 cm-1 bandwidth. The signal-to-noise ratios (SNR) of the IP-DIAL returns from cloud aerosols approach 1000:1 and the uncertainties in the mixing ratios weighted according to the integrated counts over the cloud segments range from 0.1 % to 1 %. The range averaged DIAL mixing ratios are in good agreement with the IP-DIAL mixing ratios at the 1 % to 2 % level for both CO2 and CH4. These results can serve as a validation method for future active and passive satellite observational systems.

The extent to which projects are established as an organizational form in society to cope with various challenges has been analyzed extensively in research under the term ‘projectification.’ However, it remains unclear how the projectification at the level of society begins and which actors are involved in its institutionalization. Drawing on an explanatory case study in post-Soviet Kyrgyzstan, responses are provided to these questions and propositions for further research. The country is undertaking reforms as part of its ongoing transformation, which includes professional implementation of projects, particularly in the public sector. These activities are, to some extent, based on the developments in project management in neighboring Kazakhstan, where a presidential decree also constituted a first step towards the institutionalization of projectification. It later found its way into relevant sectors and to key actors via the presidential administration, primarily through regulative and normative institutions. Due to increased international cooperation, the number and importance of projects in Kyrgyzstan will continue to increase in the coming years, requiring greater emphasis on projectification. The results are informative for research into projectification and for those involved in countries with comparable situations.

In this paper we provide an ``expository overview" of classic epidemic projection models. Starting with the simple case of an epidemic that grows exponentially we then investigate ``compartmental" models. These assume that the growth of an infected population is limited endogenously by the size of the underlying pool of susceptibles. We then describe a new family of so-called "Exo-r" statistical models, which hinge on an exogenously driven growth rate of the infected population. This family, which can be used to model both infections and deaths, captures parsimoniously both the depletion of susceptibles and the effect of interventions such as lockdowns and ``social distancing". The model is used to fit numbers of Covid-19 infections in China. It is also used to model and project deaths in the United States. Results are used to inform a discussion on i) the challenges at hand and ii) the extent to which epidemic projection models may be useful despite being wrong.

This paper presents a) the novel hybrid learning method to train the type-1 non-singleton interval type-3 (IT3) fuzzy logic systems (IT3 NSFLS-1) and b) the novel method named enhanced Wagner-Hagras (EWH) IT3 NSFLS-1 fuzzy systems which includes the level alpha 0 output to calculate the output y alpha using the average of the outputs y alpha k instead of their weighted average. The development of the proposed methodology uses the orthogonal least square (OLS) method to train the consequent parameters and the back propagation (BP) method to train the antecedent parameters. This proposal dynamically changes the parameters of only the level alpha 0 minimizing some criterion function as new information becomes available to each level alpha k. The antecedent sets are type-2 fuzzy sets, the consequent sets are fuzzy centroids, the inputs are type-1 non-singleton fuzzy numbers with uncertain standard deviations, and the secondary membership functions are modeled as two Gaussians with uncertain standard deviation and the same mean. Based on the firing set of the level alpha 0, the proposed methodology calculates each firing set of each level alpha k to dynamically construct and update the EWH IT3 NSFLS-1 (OLS-BP) system. The algorithm was tested in a hot strip mill facility to predict the transfer bar surface temperature showing its superior capability to obtain the industrial pyrometer’s knowledge uncertainty for tuning and its better performance when compared with IT2 SFLS, IT2 NSFLS-1, GT2 SFLS, GT2 NSFLS-1, IT3 SFLS, and IT3 NSFLS-1 trained with the BP-BP algorithm.

Rhabdomyosarcoma is a cancer arising from arrested myogenic differentiation, seen mainly in children or adolescents. Metastatic rhabdomyosarcoma is often fatal even with aggressive cytotoxic chemotherapies, surgery, and irradiation. SALIQ is an acronym for a multidrug augmentation regimen designed as an adjunct to current rhabdomyosarcoma chemotherapies. SALIQ uses five common non-oncology drugs, repurposed from general medicine use, to promote malignant clone maturation and inhibit rhabdomyosarcoma growth. The five drugs are: the cholesterol lowering drug simvastatin, the acne medicine tretinoin (ATRA), the psychiatric drug lithium carbonate, the antifungal drug itraconazole, and the food supplement quercetin. All five drugs are in common use for non-cancer conditions, are cheap, have an eminently safe side effect profile, and all five have preclinical evidence and good rationale for inhibiting rhabdomyosarcoma growth.

Cryopreservation is a stressful process for sperm as it is associated with an increased production of reactive oxygen species (ROS). Elevated ROS levels, which create an imbalance with antioxidant capacity, may result in membrane lipid peroxidation (LPO), protein damage and DNA fragmentation. This study aimed to determine whether membrane LPO and DNA fragmentation of frozen-thawed horse sperm relies upon the antioxidant activity, including enzymes (superoxide dismutase (SOD), glutathione peroxidase (GPX), catalase (CAT), and paraoxonase type 1 (PON1)); non-enzymatic antioxidant capacity (Trolox equivalent antioxidant capacity (TEAC), plasma ferric reducing antioxidant capacity (FRAP), and cupric reducing antioxidant capacity (CUPRAC)); and the oxidative stress index (OSI), of their seminal plasma (SP). Based on total motility and plasma membrane integrity (SYBR14+/PI−) after thawing, ejaculates were hierarchically (p < 0.001) clustered into two groups of good (GFE) and poor (PFE) freezability. LPO and DNA fragmentation (global DNA breaks) were higher (p < 0.05) in PFE than in GFE, with LPO and DNA fragmentation (global DNA breaks) after thawing showing a positive relationship (p < 0.05) with SP-OSI levels and ROS production. In addition, sperm motility and membrane integrity after thawing were negatively (p < 0.05) correlated with the activity levels of SP antioxidants (PON1 and TEAC). The present results indicate that LPO and DNA fragmentation in frozen-thawed horse sperm vary between ejaculates. These differences could result from variations in the activity of antioxidants (PON1 and TEAC) and the balance between the oxidant and antioxidant components present in the SP.

There is a deep link existing between symmetry and nature that may be best apprehended by using group theory. In physics, giving a symmetry group is entirely equivalent to fix natural laws (Noether’s theorem). Within such a framework, it follows that all fundamental mechanical laws may be given by defining a group of symmetry operations belonging to the Gal(3,1) symmetry group having ten generators (3 + 3 + 3 + 1 = 10). The move to special relativity amounts simply to substitute another group ISO(3,1) to Gal(3,1) and having the same number of generators. In both cases, one immediately perceives that we live in universe with 3 dimensions of space and 1 dimension of time. A further progress could be made by looking for the symmetry group that leaves Maxwell’s equations invariant. The answer to this fundamental question is the group ISO(4,2)⊗U(2)⊗U(2) characterized by 23 generators : 15 = 10 + 5 for the conformal group ISO(4,2), 4 for U(2) and hence 8 = 4 + 4 for the compact part U(2)⊗U(2) that could be related to the existence of quantum physics besides relativity. As ISO(3,1) is a sub-group of ISO(4,2), the two numbers 4 and 2 suggests that, taking into account the existence of light besides matter, we live in an universe having 4 spacelike dimensions and 2 time-like dimensions. Here, it is proposed that, as music is characterized by a scale-invariant symmetry operation (transposition by octaves) and that as time may be perceived differently in shamanic trance for instance, the two “new” dimensions of our universe may be related to music and consciousness. Related to the fifth dimension of music, the notion of diapason linking physical frequencies to a musical note is revisited. It is thus proposed to adopt a new A4 = 429.62 Hz value based on universal physical constants of our universe and on the mass of the water molecule H₂O, the most abundant molecule in the universe. Demonstration is done that this new diapason is superior to other diapasons based on frequencies of 440 Hz or even 432 Hz

Previous reviews have investigated machine learning (ML) models used to predict the risk of developing preeclampsia but have not described how the ML models are intended to be deployed throughout pregnancy or feature performance. The aim of this study is to provide an overview of the existing ML models and their intended deployment patterns and performance along with identified features of high importance. This review used the Preferred Reporting Items for Systematic Reviews and Meta-Analyses 2020 guidelines. PubMed, Engineering Village, and the Association for Computing Machinery were searched between January and February 2024. A total of 86 studies were found of which 14 were included. Out of 12 studies, eight showed the intent to use the ML model as a single-use, two intended a dual-use, and two intended multiple-use. A total of seven studies listed the features of the highest importance. Systolic and diastolic blood pressure were listed along with mean arterial pressure to be of high importance. Out of four studies intending to use the ML model more than a single-use, three of them were conducted in the years 2023 and 2024, whereas the remaining study is from 2011. No ML model emerged as superior across the subgroups of PE. Utilizing body mass index and either mean arterial pressure or diastolic blood pressure and systolic blood pressure may benefit the performance. The deployment patterns are mainly single use being within the gestation weeks 11+0 to 14+1.

Diffuse type of gastric cancer (GC) has an increasing prevalence worldwide, especially in Western countries, is usually diagnosed at advanced stages, and has no efficacious treatment options. Epidemiological studies have reported an increased mortality from GC after occupational exposure to well-studied pro-carcinogen that are metabolically activated by Cyp P450 enzymes through aryl hydrocarbon receptor (AhR). Substantial studies support the involvement of AhR in gastric carcinogenesis. However, little is known about the role of AhR in diffuse GC, as compared to intestinal GC. In a cohort of 29 gastric tumors, we described a significantly increased AhR protein and mRNA expression levels in GCs, independently of subtypes and clinical parameters. AhR and RhoA mRNA expression were correlated in diffuse GC. Further, our study characterized how AhR affects gene expression in diffuse GC. Using qRT-PCR, we compared the expression levels of AhR, Cyp1A1 and Cyp1B1 to the expression of genes in a panel previously described. In diffuse GC, Cyp1A1 expression correlated with genes involved in IGF signalling, EMT (VIM), migration (MMP2). In an in vitro assay using the poorly differentiated KATOIII epithelial cell line, two well-known ligands for AhR (TCDD and BaP) induced mRNA expression of CYP1A1, IL1b, as well as UGT1, NQO1 and AhRR to a lower extent. We also observed a strong increase in Cyp1B1 expression in diffuse GC, along with a lower TCDD-increased Cyp1B1 expression as compared to Cyp1A1 in KATOIII cells, and immunostaining in stromal cells. In intestinal GC, Cyp1B1 inversely correlated with several genes including IDO1 (generating endogenous kynurenin-e AhR ligand). Our data provide evidence for a major role of AhR in GC, as an environmental xenobiotics receptor, through different mechanisms and pathways in diffuse and intestinal GC. Our results support continued efforts to clarify the identities of exogenous AhR ligands in diffuse GC in order to define new therapeutic strategies.

Dietary contaminants are often an over-looked factor in the health of zebrafish. Typically, water is considered to be the source for most contaminants, especially within an aquatic environment. For this reason, source water for zebrafish recirculating systems is highly regulated and monitored daily. Most facilities use reverse osmosis or de-ionized water filtration systems to purify incoming water to ensure that contaminants, as well as pathogens, do not enter their zebrafish housing units. However, diets are rarely tested for contaminants and, in the case of manufactured zebrafish feeds, since the product is marketed for aquaculture or aquarium use it is assumed that the feed is acceptable for animals used for research. The following provides examples as to how contaminants could lead to negative effects on development and behavior of developing zebrafish.

In the Brazilian Amazon, rural settlements are increasingly isolated by large-scale production farms, jeopardizing their sustainability and the good living of family farmers. Works were carried out in settlements to measure sustainability. However, the majority does not consider the participation and the collectively of those involved. In this way, we propose to evaluate, in a collective and participatory way, the sustainability and good living of the SDP São Paulo Rural Settlement, of the northern Amazon of Mato Grosso. We used the didactic-pedagogical method Circle of Sustainability, developed from five points: 1st - circle of investigation of generating themes; 2nd - circle of the history of the subject world; 3rd - circle of diagnosis of rural settlements; 4th - circle of exchange of knowledge; and 5th - circle of sustainable perceptions and narratives. The historical, socioeconomic and cultural characterization of the settlement allowed us to understand how sustainability and good living are being built in the settlement history process. Sustainability and good living are dialectical processes, are under construction, in movement.

This paper describes the design and implementation of an ultrasonic non-contact air-coupled technique (UNCACT) using antisymmetric Lamb waves (ALW) for NDT assessment in novel composite sandwich plates of the car body shell. This technique is complemented with a C-Scan image implementation using this kind of guided waves. The finite element method using Comsol 6.1 is developed for the interpretation of the several wave modes presented in the experiments, including the ALW mode. The phase velocity method (PVM) is applied for the verification of the ALW mode in the portion of the RF signal necessary in the C-Scan image.

Recent studies have demonstrated an important role for vitamin C in the epigenetic regulation of cancer-related genes via DNA demethylation by the ten-eleven translocation (TET) methylcytosine dioxygenase enzymes. DNA methyltransferase (DNMT) reverses this, increasing DNA methylation and decreasing gene expression. Dual oxidase (DUOX) enzymes produce hydrogen peroxide (H2O2) in normal pancreatic tissue but are silenced in pancreatic cancer (PDAC). Treatment of PDAC with pharmacologic ascorbate (P-AscH-, intravenous, high dose vitamin C) increases DUOX expression. We hypothesized that inhibiting DNMT may act synergistically with P-AscH- to further increase DUOX expression and cytotoxicity of PDAC. PDAC cells demonstrated dose-dependent increases in DUOX mRNA and protein expression when treated with DNMT inhibitors. PDAC cells treated with P-AscH- + DNMT inhibitors demonstrated increased DUOX expression, increased intracellular oxidation, and increased cytotoxicity in vitro and in vivo compared to either treatment alone. These findings suggest a potential therapeutic, epigenetic mechanism to treat PDAC.

In recent research, a growing body of empirical evidence, suggests that prosocial impact at work can play a significant role in enhancing creativity and innovativeness. Drawing from Self Determination Theory, we hypothesized that basic psychological needs and benevolence satisfaction could serve as a mediating factor in the relation between employees perceived social impact and innovative work behavior and creativity, thus illuminating the manner in which contentment of psychological needs fosters inventive proclivities within the organizational milieu. Results from a study in Greece and Canada (N=528) showed that both perceived social impact and prosocial motivation are positively associated with innovative work behavior and creativity while autonomy and competence satisfaction mediate the relation between perceived social impact and the work outcomes examined within this study. Moreover, prosocial motivation was found to moderate the relation between benevolence satisfaction and innovativeness. Findings extend prior research on the role of prosociality on creative behavior at work and provide supporting evidence for the organizations that encourage and support employees’ initiatives to make a positive difference in the lives of others.

Heating systems such as heat pump and combined heat and power cycle systems (CHP) are representing a key component in the future smart grid. Their capability to couple the electricity and heat sector promises a massive potential to the energy transition. Hence, these systems are continuously studied numerical and experimental to quantify their potential and develop optimal control methods. Although numerical simulations provide time and cost-effective solution for system development and optimization, they are exposed to several uncertainties. Hardware in the loop (HiL) system enables system validation and evaluation under different real-life dynamic constraints and boundary conditions. In this paper, a HiL system of heat pump testbed is presented. This system is used to present two case studies. In the first case, the conventional heat pump testbed operation method is compared to the HiL operation method. Energetic and dynamic analyses are performed to quantify the added value of the HiL and its necessity for dynamics analysis. The second case, the HiL testbed is used to validate the heat pump operation in a single family house participating in a local energy market. It enables not only the dynamics of the heat pump and the space heating circuit to be validated but also the building room temperature. The energetic analysis indicated a deviation of 2% and 5% for heat generation and electricity consumption of the heat pump, respectively. The model dynamics emphasized the model capability to present the dynamics of a real system with a temporal distortion of 3%.

By examining Planck's equation E=hν, one finds an analogy with accounting billing for electricity. Frequency and power have a physical dimension T-1, so one obtains an energy value accounted for over a time interval by multiplying them by this time interval. By investigating this analogy, one finds a surprising mistake in Planck's law for the frequency of black body radiation: confusion between two contexts, one for radiation power and one for a timeless energy density. One goes from one to the other by an accounting-type transformation: a multiplication by 4π/c or c/4π. Correcting this mistake makes a Planck constant h timeless, invalidating the photon definition and de Broglie’s wave-particle duality. Despite this mistake, one obtains the same value for the black body radiation; it goes unnoticed. Consequently, the Planck relation becomes P=hν, with the energy of a cycle equal to h, whatever the frequency. One can consider this cycle as a new photon, which behaves like a particle by its radiation pressure. Its energy-mass equivalence h=mɣc2 gives a mass of 4.134883524·10-15 eV, in the range referenced by the Particle Data Group. This correction of Planck's relation calls quantum physics into question.

We describe results from a Monte-Carlo simulation of Bell-CHSH type correlations in hydrodynamic walkers. We study feasibility of a real life walker test with relevant hydrodynamic parametric ranges. We observe the generic formation of pairs of walkers strongly anti-correlated both in position and momentum. With this source of entangled walkers, we model the insertion of 2 pins in the bath as a notion of measure, akin to the polarizers of photonic Bell tests. This insertion of pins, either static or dynamic, introduces 2 weak field signals. Each field has the physical form of a standing wave Bessel hat, representing the non-local (field mediated) influences of the measure on the walkers. With this representation of the measure, we develop protocol for a Bell game with actual hydrodynamic walkers. We model both static and dynamic insertion of pins in the walker bath. Static pins give us numerical S > 2, as a permissible Bell violation for a non-local (field based) effect. Dynamic insertion of the pins, however, leads to causal space separation of the two arms. We observe the again expected S ≤ 2. We argue for the hydrodynamic implementation and observation of these effects as a walker visualization of Bell inequalities.

Fused deposition modeling (FDM) is a rather new technology in the production of personalized dosage forms. Melting and printing of polymer–active pharmaceutical ingredient (API) – mixtures can be used to produce oral dosage forms with different dosage as well as release behavior. This process is utilized to increase the bioavailability of pharmaceutically relevant active ingredients that are poorly soluble in physiological medium by transforming them into solid amorphous dispersions (ASD). Release from such ASDs is expected to be faster and higher compared to the raw materials and thus enhance bioavailability. Printing directly from powder while forming ASDs was realized. Different techniques to change release patterns as well as a non-destructive way for determination of API distribution were shown. By measuring the melt viscosities of mixtures printed a rheological model for the printer used is proposed.

Conversational spoken dialogue systems that interact with the user rather than merely reading text can be equipped with hesitations to manage the dialogue flow and the users' attention. Based on a series of empirical studies, we built an elaborated hesitation synthesis strategy for dialogue systems that inserts hesitations of scalable extent wherever needed in the ongoing utterance. So far, evaluations of hesitating systems have shown that synthesis quality is affected negatively by hesitations, but that there is improvement in interaction quality. We argue that due to its conversational nature, hesitation synthesis needs interactive evaluation rather than traditional MOS-based questionnaires. To prove this point, we dually evaluate our system’s speech synthesis component: on the one hand, linked to the dialogue system evaluation, on the other hand, in the traditional MOS way. This way we are able to analyze and discuss differences that arise due to the evaluation methodology. Our results suggest that MOS scales are not sufficient to assess speech synthesis quality, which has implications for future research that are discussed in this paper. Furthermore, our results indicate that hesitations work well to increase task performance and that an elaborated strategy is necessary to avoid likability issues.

Mountain and pastoralist societies around the world have for centuries sustained their livelihoods and cultures by accumulating specialist knowledge about their local and regional socio-ecological environments. Developing traditional knowledge and customary practices takes time, sometimes spanning across generations. As macro-level changes to social and natural environment are now taking place, such as globalization and climate change, local communities could potentially also benefit from complementary, suitably adapted educational opportunities for sustainable development. However, access to education has often required moving to urban centres, which can weaken community structures and cohesion, and could also foster increased dependence on external specialists, providers or decision-makers. Careful introduction of emerging Educational Technologies could alleviate and possibly reverse such trends as mobile Internet access spreads to remote areas. This paper examines the role of education in sustainable development and specifically explores the potential for two educational innovations, open badges and blockchain, to provide a new construct for transformation in sustainable development amongst mountain and pastoralist societies. These technologies could not only facilitate education through online distance learning, but also allow geographically remote populations to highlight the value of their traditional knowledge and to engage more comprehensively in their changing worlds.

Human urinary bladder cancer has similar development that invasive urothelial cancer that happens spontaneously in dogs. Then, research of these malignant tumors associated with the advances of new treatment drive to the specific fight of the urothelial tumor cell, is highly valuably related to efficiency and reduction of side effects of treatments, even extrapolating to humans. Thus, a review of the most important aspects on new advances on canine bladder cancer was achieved. Many forms of therapies are being reported; one of them, of highly promising feature is the treatment with immunomodulators. The resemblance between spontaneous urothelial cancer in canines and urinary bladder cancer in humans makes this canine tumor relevant animal model to research and advances of treatment that may be more efficient in management of tumor with less unfavorable effects. Immunomodulators exhibit important outcomes when used in the therapy of bladder cancer in dogs. Nanomaterials that are possible carriers of some kinds of drugs to the target tumor significantly raise the efficiently of the therapy. Therefore, the advancement of immunomodulator combined with nanoparticles can disrupt the therapy of bladder cancer in dogs and thereafter in humans.

Although all isolates of the foodborne pathogen Listeria monocytogenes are considered to be pathogenic, epidemiological evidence indicates that certain serovar 4b lineages are more likely to cause severe invasive (neuromeningeal, maternal-fetal) listeriosis. Recently described as L. monocytogenes “hypervirulent” clones, no distinctive bacterial trait has been identified so far that could account for the differential pathogenicity of these strains. Here we discuss some preliminary observations in experimentally infected mice suggesting that serovar 4b hypervirulent strains may have a hitherto unrecognized capacity for prolonged in vivo survival. We propose the hypothesis that protracted survivability in primary infection foci in liver and spleen –first target organs after intestinal translocation– may cause L. monocytogenes serovar 4b hypervirulent clones to have a higher probability of secondary dissemination to brain and placenta.

In humankind’s endeavor to explore beyond our planet and travel further into space, we are now at the threshold of an era in which it is possible to move to and from low Earth orbit (LEO) with increasing ease and reduced cost. Through the International Space Station (ISS) U.S. National Laboratory, investigators from industry, academia, and government can easily access the unique LEO environment on the ISS to conduct research and development (R&D) activities in ways not possible on Earth. A key advantage of the LEO environment for life sciences research is the ability to conduct experiments in sustained microgravity conditions. The ability to conduct long-term research in microgravity enables opportunities for novel, fundamental studies in tissue engineering and regenerative medicine, including research on stem cell proliferation and differentiation, biofabrication, and disease modeling using microphysiological systems (MPS) that build on prior research using simulated microgravity conditions (Grimm, D., et al. 2018). Over the last decade, space-based research has demonstrated that microgravity informs our knowledge of fundamental biology and accelerates advancements in health care and medical technologies (International Space Station 2019). The benefits provided by conducting biomedical research in LEO may lead to breakthroughs not achievable on Earth. We are now at a transition point, in which nations are changing their approach to space-based R&D. The focus is shifting from government-funded fundamental science toward the expansion of privately funded R&D with terrestrial application and economic value that will drive a robust marketplace for innovation and manufacturing in LEO. Making this long-term transition requires public-private participation and near-term funding to support critical R&D to leverage the benefits of the LEO environment and de-risk space-based research. Studies conducted on the ISS over the past several years have indicated that one area with potential significant economic value and benefit to life on Earth is space-based biomanufacturing, or the use of biological and nonbiological materials to produce commercially relevant biomolecules and biomaterials for use in preclinical, clinical, and therapeutic applications. We must take advantage of the remaining lifetime of the ISS as a valuable LEO platform to demonstrate this economic value and Earth benefit. By facilitating access to the space station, the ISS National Lab is uniquely positioned to enable the R&D necessary to bridge the gap between the initial discovery phase of space-based biomedical research and the development of a sustainable, investment-worthy biomanufacturing market in LEO supported by future commercial platforms. Through a joint effort, the Center for the Advancement of Science in Space (CASIS), which manages the ISS National Lab, and the University of Pittsburgh’s McGowan Institute for Regenerative Medicine brought together thought leaders from around the U.S. for a Biomanufacturing in Space Symposium that consisted of a series of working sessions to review data from past space-based tissue engineering and regenerative medicine research, discuss relevant current space-based R&D in this area, and consider potential future markets to address the questions: What are the most promising opportunities to leverage the ISS to advance space-based biomanufacturing moving forward? What are the current gaps or barriers that, if overcome, could clear pathways toward private investment in LEO as a valued site for research, development, and production activity? And, most importantly: For which opportunities do the most compelling value propositions exist? The goal of the Biomanufacturing in Space Symposium was to help identify the specific areas in which government and industry investment would be most likely to stimulate advancements that overcome barriers. This would lead to a more investment-ready landscape for private interests to enter the market and fuel exponential growth. The symposium was meant to serve as the first step in developing a roadmap to a sustainable market for biomanufacturing in space. The symposium identified and prioritized multiple key R&D opportunities to advance space-based biomanufacturing. These opportunities fall in the areas of disease modeling, stem cells and stem-cell-derived products, and biofabrication. Additionally, symposium participants highlighted the critical need for additional data to help validate and de-risk these opportunities and concluded that approaches such as automation, artificial intelligence (AI), and machine learning will be needed to produce and capture the required data. Symposium participants also came to a consensus that public-private partnerships and funding will be needed to advance the opportunities toward a biomanufacturing marketplace in LEO. This paper will summarize the current state of the science and technology on the ISS and in the fields of tissue engineering and regenerative medicine; provide an overview of biomanufacturing R&D in space to date; review the goals of the Biomanufacturing in Space Symposium; highlight the key commercial opportunities and gaps identified during the symposium; provide information on potential market sizes; and briefly discuss the next steps in developing a roadmap to biomanufacturing in space.

The Doig Phosphate Zone (DPZ) is a phosphate-bearing marine unit located at the base of the Doig Formation, in the Triassic section of the Western Canada Sedimentary Basin. The DPZ has a maximum thickness of 90 m and extends across northeastern British Columbia and western central Alberta. In this study we characterize the significance and interpret the origin of apatite in the DPZ, through mineralogical and geochemical analyses, thin section study and field emission-scanning electron microscopy. The occurrence of apatite in the DPZ is not evenly distributed, but restricted to discrete 10 to 20 cm thick beds, located near the base of the DPZ. Phosphorites are of two types: grainstones composed primarily of unconformity-bounded coated grains, and intraclastic phosphorites composed of detrital silt-sized grains and apatite coated grains in a cryptocrystalline phosphatic matrix. The phosphorite beds are records of stratigraphic condensation due to low detrital input during transgression. The erosionally-truncated phosphatic coated grains and intraclasts are interpreted to be a result of various phases of phosphatization, exhumation, erosion reworking, winnowing and redeposition in alternating quiescence and storms or bottom currents. The abundance of pyrite and chalcophile trace elements, as well as the low concentration of proxy elements for organic matter productivity and preservation, are further evidences of stratigraphic condensation, with sulfidic pore water development and extensive organic recycling promoted by biological activity during the long exposure times. The phosphorites were formed under oxygenated water conditions, as suggested by the depletion in Ce and presence of a diverse benthic fauna.

In the context of global warming and increasing scarcity of fresh water resources, it becomes significant to evaluate the contribution and evolution of non-rainfall waters such as dew. This study therefore aims to evaluate the relative dew and rain contributions in three sites of south-western of Madagascar (Ifaty, Toliara and Andremba), a semi-arid region which suffers from a strong water deficit. The studied period is 1/1991 – 7/2023, with extrapolation to 8/2033. Dew is calculated from meteo data by using a well-established energy model. The extrapolation of dew and rain follows an artificial neural network approach. It is found that dew forms regularly (2-3 days in average between events), in contrast to rain (10-15 days). The evolutions of dew and rain are similar, with an increase from 1991 to 2000, a decrease up to 2020 and a further increase until 2033. These oscillations follow the Indian Ocean dipole variations and should be influenced by the climate change. Dew contribution to the water balance remains modest on a yearly basis (3-4%) but is important during the dry season (Apr.-Oct.), up to 30%. Dew therefore appears to be a reliable and sustainable resource for plants, small animals and population, especially during droughts.

Môle Saint-Nicolas, like all other communes in the Republic of Haiti, faces increasing climate variability, impacting agricultural production and water resources. Consequently, there is a pressing need for adaptation to these climatic changes. This research aims to showcase the adaptation strategies deployed by farmers to cope with the increasing climate variability. Surveys were conducted through group and individual discussions with a randomly selected cohort of 150 farmers. Two types of analysis were performed: quantitative and qualitative. The quantitative data analysis was conducted using SPSS software. The findings reveal that farmers have perceived changes in rainfall patterns, temperature, wind, and their environment. These changes manifest as irregular rainfall, higher temperatures, prolonged drought periods, violent winds accompanied by rain, premature cessation of rains, and reduced flow from water sources. In response, the most common adaptation strategies developed include selecting new cultivars, early-maturing varieties, crop rotation and diversification, canal dredging, new soil preparation methods, upstream water source protection, and micro-watershed management. The significance of this research lies in its contribution to enhancing farmers' adaptive capacities by alerting stakeholders in the irrigated perimeters about the consequences of climate change, thereby incorporating the real needs of farmers in future projects.

The recent revival of the study of organic natural products as renewable sources of medicinal drugs, cosmetics, dyes, and materials motivated the creation of general-purpose structural databases. Dereplication, the efficient identification of already reported compounds, relies on the grouping of structural, taxonomic and spectroscopic databases that focus on a particular taxon (species, genus, family, order…). A set of freely available python scripts, CNMRPredict, is proposed for the quick supplementation of taxon-oriented search results from the LOTUS database (lotus.naturalproducts.net) with predicted carbon-13 NMR data from the ACD/Labs (acdlabs.com) CNMR predictor and DB software to provide easily searchable databases. The database construction process is illustrated using Brassica rapa as taxon example.

Solar power innately has issues with weather, grid demand and time of day, which for the case of concentrating solar power (CSP) can be mitigated through use of thermal energy storage. Nuclear reactors, including lead-cooled fast reactors (LFRs), can load follow, but have high fixed and low operating costs which can make this economically unattractive. We investigate potential synergies through coupling CSP and LFR together in a single supercritical CO$_2$ Brayton cycle and/or using the same thermal energy storage. Combining these cycles allows for the LFR to thermally charge the salt storage in the CSP cycle during low demand periods to be dispatched when grid demand increases. The LFR/CSP coupling into one cycle is modeled to find the preferred location of the LFR heat exchanger, CSP heat exchanger, sCO$_2$-to-salt heat exchanger (C2S), turbines, and recuperators within the supercritical CO$_2$ Brayton cycle. Three cycle configurations have been studied: two-cycle configuration, which uses CSP and LFR heat for dedicated turbocompressors, has the highest efficiencies but with less component synergies; a combined cycle with CSP and LFR heat sources in parallel is the simplest with the lowest efficiencies; and a combined cycle with separate high temperature recuperators for both the CSP and LFR is a compromise between efficiency and component synergies. Additionally, four thermal energy storage charging techniques are studied: the turbine positioned before C2S, requiring a high LFR outlet temperature for viability; the turbine after the C2S, reducing turbine inlet temperature and therefore power; the turbine parallel to the C2S producing moderate efficiency; and a dedicated circulator loop. While all configurations have pros and cons, use of a single cycle offers component synergies with limited efficiency penalty. Using a turbine in parallel with the C2S heat exchanger is feasible but results in a low charging efficiency, while a dedicated circulator loop offers flexibility and near perfect heat storage efficiency but increasing cost with additional cycle components.

Condition monitoring of bearings is an open issue. The use of the stator current to monitor induction motors has been validated as a very advantageous and practical way to detect several types of faults. Nevertheless, for bearing faults the use of vibrations or sound generally offers better results in the accuracy of the detection although with some disadvantages related to the sensors used for monitoring. To improve the performance of bearing monitoring, it is proposed to take advantage of more information available in the current spectra, beyond the usually employed, incorporating the amplitude of a significant number of sidebands around the first eleven harmonics, growing exponentially the number of fault signatures. This is especially interesting for inverter-fed motors. But, in turn, this leads to the problem of overfitting when applying a classifier to perform the fault diagnosis. To overcome this problem, and still exploit all the useful information available in the spectra, it is proposed to use shrinkage methods, which have been lately proposed in machine learning to solve the overfitting issue when the problem has much more variables than examples to classify. A case study with a motor is shown to prove the validity of the proposal

We study the efficient computation of power indices for weighted voting games with precoalitions amongst subsets of players (reflecting, e.g., ideological proximity) using the paradigm of dynamic programming. Starting from the state-of-the-art algorithms for computing the Banzhaf and Shapley-Shubik indices for weighted voting games we present a framework for fast algorithms for the three most common power indices with precoalitions, i.e. the Owen index, the Banzhaf-Owen index and the Symmetric Coalitional Banzhaf index, and point out why our new algorithms are applicable for large numbers of players. We discuss implementations of our algorithms for the three power indices with precoalitions in C++ and review computing times as well as storage requirements.

Understanding the evolutionary role of environmentally-induced phenotypic variation (i.e., environmental plasticity) is an important issue in developmental evolution. One of the major physiological responses to environmental changes is cellular stress, which is counteracted by a generic stress reaction that detoxifies the cell, refolds proteins, and repairs DNA damage. In this paper, we elaborate on a previous finding suggesting that the cell differentiation cascade of human decidual stromal cells, a cell type critical for embryo implantation and the maintenance of pregnancy, evolved from a cellular stress reaction. We hypothesize that the stress reaction in these cells was elicited ancestrally through the inflammation caused by embryo attachment and invasion. We describe a model, Stress-Induced Evolutionary Innovation (SIEI), whereby ancestral stress reactions and their corresponding pathways can be transformed into novel structural components of body plans, such as new cell types. After reviewing similarities and differences between SIEI and the “plasticity first hypothesis” (PFH) of evolution, we argue that SIEI is a distinct form of plasticity-based evolutionary change because it leads to the origin of novel structures rather than the adaptive transformation of a pre-existing character.

This work explores the use of Kuhn verdazyl radicals as building blocks in multifunctional molecular materials in an exemplary study, focusing on the magnetic and the electron transfer (ET) characteristics, but also addressing the question whether chemical modification by cross-coupling is possible. The ET in solution is studied spectroscopically whereas solid state measurements afford information about the magnetic susceptibility or the conductivity of the given samples. The observed results are rationalized based on the chemical structures of the molecules, which have been obtained by X-ray crystallography. The crystallographically observed molecular structures as well as the interpretation based on the spectroscopic and physical measurements are backed up by DFT calculations. The measurements indicate that only weak, antiferromagnetic coupling is observed in Kuhn verdazyls owed to the low tendency to form face-to-face stacks, but also that steric reasons alone are not sufficient to explain this behavior. Furthermore, it is also demonstrated that ET reactions proceed rapidly in verdazyls/verdazylium redox couples and that Kuhn verdazyls are suited as donor molecules in ET reactions.

Gliomas are solid tumors of the Central Nervous System (CNS) that originated from different glial cells. The World Health Organization (WHO) classified these tumors into four groups (I-IV) with increasing malignancy. Glioblastoma (GBM) is the most common and aggressive type of brain tumor classified as a grade IV. GBM are resistant to conventional therapies with poor prognosis after diagnosis even when the Stupp protocol that combines surgery and radiochemotherapy is applied. Nowadays, few novel therapeutic strategies have been used to improve GBM treatment, looking for higher efficiency and lower side effects, but with relatively modest results. The circadian timing system temporally organizes the physiology and behavior of most organisms and daily regulates several cellular processes in organs, tissues, and even in individual cells, including tumor cells. The potentiality of the function of the circadian clock on cancer cells modulation as a new target for novel treatments with a chronobiological basis offers a different challenge that needs to be considered in further detail. The present review will discuss state of the art regarding GBM biology, the role of the circadian clock in tumor progression, and new chrono-chemotherapeutic strategies applied for GBM treatment.

Based on recent popular money priming research results, which conclude that money makes self-sufficient (e.g. less interest in other people), we assumed that people are less interested in finding out whether others are lying or telling the truth. In a laboratory experiment, 163 students (85 women, 78 men, M_Age = 23.08, ranging from 18 to 36 years) were primed by actively handling money (versus paper sheets). Afterwards, they classified 24 video statements as true or deceptive (senders describing their most/least favorite movie), rated their classification confidence for each decision and then answered control questions. Results revealed no influence of priming condition on judgmental bias, classification accuracy, and classification confidence. Also the level of self-reported motivation to find out who lied or told the truth did not differ between conditions. Higher motivation was correlated to higher classification confidence. Additionally, and in line with Reinhard (2010) and Reinhard et al. (2011), higher classification accuracy correlated to a higher use of verbal content cues for classification decisions. Thus, while we were able to replicate these findings, our results contradict the assumption of a money prime influence on lie detection ability. Concluding, our results make self-sufficiency in this context questionable and offer next steps for research.

Food allergies are a growing public health concern worldwide, especially in children and young adults. Allergen-specific IgE plays a central role in the pathogenesis of food allergies, but their titers poorly correlate with allergy development. Host immune systems yield allergen-specific immunoglobulin (Ig)A, IgE and IgG subclasses with low or high affinities and differential Fc N-glycosylation patterns that can affect the allergic reaction to food in multiple ways. High affinity IgE is required to induce strong mast cell activation eventually leading to allergic anaphylaxis while low affinity IgE can even inhibit the development of clinically relevant allergic symptoms. IgA and IgG antibodies can inhibit IgE-mediated mast cell activation through various mechanisms, thereby protecting IgE-positive individuals from allergy development. The production of IgE and IgG with differential allergenic potential seems to be affected by the signaling strength of individual B cell receptors, and by cytokines from T cells. This review provides an overview of the diversity of the B cell response and the diverse roles of antibodies in food allergy.

Molecular visualisation is fundamental in the current scientific literature, textbooks and dissemination materials, forming an essential support for presenting results, reasoning on and formulating hypotheses related to molecular structure. Visual exploration has become easily accessible on a broad variety of platforms thanks to advanced software tools that render a great service to the scientific community. These tools are often developed across disciplines bridging computer science, biology and chemistry. Here we first describe a few Swiss Army knives geared towards protein visualisation for everyday use with an existing large user base, then focus on more specialised tools for peculiar needs that are not yet as broadly known. Our selection is by no means exhaustive, but reflects a diverse snapshot of scenarios that we consider informative for the reader. We end with an account of future trends and perspectives.

In the context of global warming and reduction in fresh water availability is presented a study of the evolution of dew, rain and evapotranspiration in the NW of Africa. The time periods are concerned with the years 2005-2020, using existing data, and years 2020-2100, using the low and high emissions representative concentration pathway scenarios RCP 2.6/8.5 from the Cordex database. A continuous decrease in rain precipitation is observed, on order of -14 mm/decade for the more credible scenario RCP 8.5. The amplitude is maximum on the coast and on the foothills of Atlas. A clear decrease in dew yields is also observed along a NW/SE axis, strongly correlated with a corresponding decrease in relative humidity (up to 7%). Chemical dew and rain data in the representative site of Mirleft correspond to the major cations Na+ > Ca2+ > Mg2+ > K+, similar to a local spring water. Concentrations in rain are about two times less than in dew water. Ionic concentrations are compatible with WHO standards. The seasonal variations of the ionic concentrations in dew and rain follow a volume dilution dependence. The expected diminution in dew and rain volumes according to the RCPs 2.6 and 8.5 should increase the dew and rain ionic concentrations in the future.

Both types of surgical guides – with and without metal sleeves are founded beneficial in clinical studies. The aim of this in vitro study was to compare time of surgical procedure in dental implantology depending of used type of the surgical guide. Ten three dimensional (3D) printed models of lower jaws were prepared based on complete virtual model of patient clinical conditions with missing teeth 37, 46 and 47. Five of this models were used for implant sites preparation performed with use of surgical guide without metal sleeves and dedicated surgical kit, and next five were used for the same procedure performed with surgical guide with metal sleeves and dedicated surgical kit. Time of implant site preparation were measured and noted. Statistical analysis was performed using Student’s t test for independent samples. Difference of time in both groups were founded as statistically significant (t=-9.94; df =28; p=0.0000). Type of surgical guide is important factor which can impact on time of implant site preparation and all surgical procedure.

Probiotics have been used to ameliorate gastrointestinal symptoms since ancient times. Over the past 40 years, probiotics have been shown to exert major effects on the immune system, both in vivo and in vitro. This interaction is clearly linked to gut microbes, their polysaccharide antigens, and key metabolites produced by these bacteria. At least four metabolic pathways have been implicated in mechanistic studies of probiotics, based on carefully studied animal models. Microbial-immune system crosstalk has been linked to short chain fatty acid production and signaling, tryptophan metabolism and the activation of aryl hydrocarbon receptors, nucleoside signaling in the gut, and activation of the intestinal histamine-2 receptor. Several randomized controlled trials have now shown that microbial modification by probiotics may improve gastrointestinal symptoms and multi-organ inflammation in rheumatoid arthritis, ulcerative colitis, and multiple sclerosis. Future work will need to carefully assess safety issues, selection of optimal strains and combinations, and attempts to prolong the duration of colonization of beneficial microbes.

In this study, we introduce the concept and construction of an innovative Digital Miniature Cathode Ray Magnetometer designed for the precise detection of magnetic fields. This device addresses several limitations inherent to magnetic probes such as D.C. offset, nonlinearity, temperature drift, sensor aging, and the need for frequent recalibration, while capable of oper-ating in a wide range of magnetic fields. The core principle of this device involves the utilization of a charged particle beam as the sensitivity medium. The system leverages the interaction of an electron beam with a scintillator material, which, then, emits visible light that is captured by an imager. The emitted scintillation light is captured by a CMOS sensor. This sensor not only rec-ords the scintillation light but also accurately determines the position of the electron beam, providing invaluable spatial information crucial for magnetic field mapping. The key innova-tion lies in the combination of electron beam projection, CMOS imager scintillation-based de-tection and digital image signal processing. By employing this synergy, the magnetometer achieves remarkable accuracy, sensitivity and dynamic range. The precise position registration enabled by the CMOS sensor further enhances the device's utility in capturing complex magnetic field patterns, allowing for 2D field mapping. In this work, the optimization of the probe's per-formance is tailored for applications related to the characterization of insertion devices in light sources, including undulators.

The identification of fetal cells in the blood and tissues of healthy mothers raised questions about the potential alloreactive origins of various diseases, such as autoimmunity, diabetes, arteriosclerosis, and cancer. However, the extent to which alloreactivity contributes to these diseases remains unverified. This study presents a basic mathematical disease model based on the genes’ origin and immunological interactions. This model, grounded in set theory, classifies these immunological interactions based on their intrinsic, extrinsic, and allogeneic nature. Therefore, this model offers an unexpected common theoretical foundation for understanding alloreactivity, genetic diseases, and infections. Furthermore, this model provides a valuable framework for scrutinizing the role of alloreactivity in health and disease.

Abstract: Obstructive sleep apnea (OSA) is well known to often improve with non-supine positioning as opposed to su¬pine positioning. Emerging research supports a role for sleep position management in patients with central sleep apnea (CSA) as well. We report a case of de novo Complex Sleep apnea Syndrome (CompSAS) in a 78-year-old female, who presented after a car accident due to unclear syncope. Diagnostic polysomnography (PSG) showed a moderate OSA. A CompSAS developed under Automatic positive airway pressure (APAP), while download data of 4 years showed a good adherence. No significant benefit was reported under Adaptive Servo Ventilation (ASV) and BiPAP-ST, while a reduction of CSA in non-supine position was noticed. Oxygen and sleep positional therapy (SPT) were considered resulting in a significant improvement of CSA and sleep quality. Further research on the prevalence of positional CSA is needed.

Introduction: Type 2 diabetes (T2D) is a major driver of health care costs, thus treatments enabling T2D reversal may reduce expenditures. We examined the impact of a T2D continuous care intervention (CCI) on health care utilization. Previous research documented that CCI, including individualized nutrition supported by remote care, simultaneously reduced hemoglobin A1c and medication use and improved cardiovascular status after two years; however, the impact on utilization is unknown. Methods: This study used four years of data (two years pre-intervention, two years post-intervention) from the Indiana Network for Patient Care (INPC) health record. Two methods estimated the impact of CCI on utilization. First, an interrupted time series (ITS) including only CCI participants (n=193) compared post-intervention utilization to expected utilization had the pre-intervention trend persisted. Deviation from the trend was estimated non-parametrically for each 6-month interval after the implementation of CCI . Second, a 1:3 matched comparator group (n=579) was constructed and used for a difference-in-differences (DiD) analysis. The primary outcome was annualized outpatient encounters. Secondary outcomes included emergency encounters and hospitalizations. Results: In two years prior to intervention, CCI participants had a mean of 5.77 annualized encounters (5.62 outpatient, 0.04 hospitalizations, 0.11 emergency). The CCI group showed a reduction in outpatient utilization after intervention. In ITS analysis, 1.6 to 1.9 fewer annualized outpatient encounters occurred in each 6-month interval post-intervention relative to expected utilization based on pre-intervention trends (p<0.01 each 6-month period; 28-33% reduction). The DiD analysis suggested a larger reduction; 5 fewer annualized outpatient encounters in the quarter after intervention, diminishing to 2.5 fewer after 2 years (p<0.01 each quarter). The study was underpowered to draw conclusions about hospitalization and emergency encounters due to the limited number of CCI patients and the rarity of encounters. Conclusions: Outpatient encounters were significantly reduced for a T2D patient population up to 2 years after receiving an individualized intervention supporting nutrition and behavior change through remote care.

A proper transmission of the orientation between surface and underground workings, by means of vertical shafts, is an important challenge in the mining industry, especially when the mine exceeds 200 meters deep. In fact, this study is developed in a mine located to 700 meters deep. Likewise, this paper assesses the accuracy of this operation, in a case study, using the two shafts plumbing and gyroscope methods in order to compare and analyse the planimetric displacement of the base line due to different source of errors in each one. Upsides and downsides of both methods are analysed in the paper. Some disadvantages in each method have been reduced thanks to the technological progress, especially in the two shaft plumbing method. The different sources of error that affect the measures are thoroughly analysed in the study with the aim to compensate them and achieve the required precision for an underground infrastructure. Mine ventilation has been found as one of the most important sources of error in the plumbing method due to intake and return airflow. In this direction, the paper unfolds some measures to reduce the ventilation influence and details a compensation method to reduce ventilation errors.

There is a growing consensus that culture influences the perception of facial expressions of emotion. However, little is known about whether and how culture shapes the production of emotional facial expressions, and even less so about whether culture differentially shapes the production of posed versus spontaneous expressions. Drawing on prior work on cultural differences in emotional communication, we tested the prediction that people from the Netherlands (a historically heterogeneous culture where people are prone to low-context communication) produce facial expressions that are more distinct across emotions compared to people from China (a historically homogeneous culture where people are prone to high-context communication). Furthermore, we examined whether the degree of distinctiveness varies across posed and spontaneous expressions. Dutch and Chinese participants were instructed to either pose facial expressions of anger and disgust, or to share autobiographical events that elicited spontaneous expressions of anger or disgust. Using the complementary approaches of supervised machine learning and information-theoretic analysis of facial muscle movements, we show that posed and spontaneous facial expressions of anger and disgust were more distinct when produced by Dutch compared to Chinese participants. These findings shed new light on the role of culture in emotional communication by demonstrating, for the first time, effects on the distinctiveness of production of facial expressions.

Social media data is widely used to gain insights about social incidents, whether on a local or global scale. Within the process of analyzing and evaluating the data, it is common practice to download and store it locally. Considerations about privacy protection of social media users are often neglected thereby. However, protecting privacy when dealing with personal data is demanded by laws and ethics. In this paper we introduce a method to store social media data using the cardinality estimator HyperLogLog. Based on an exemplary disaster management scenario, we show that social media data can be analyzed by counting occurrences of posts, without becoming in possession of the actual raw data. For social media data analyses like these, that are based on counting occurrences, cardinality estimation suffices the task. Thus, the risk of abuse, loss or public exposure of the data can be mitigated and privacy of social media users can be preserved. The ability to do unions and intersections on multiple data sets further encourages the use of this technology. We provide a proof-of-concept implementation for our introduced method, using data provided by the Twitter API.

Is it possible to measure the dispersion of ex-ante chances (i.e. chances “before the event”) among people, be it gambling, health, or social opportunities? We explore this question and provide some tools, including a statistical test, to evidence the actual dispersion of ex-ante chances in various areas with a focus on chronic diseases. Using the principle of maximum entropy, we derive the distribution of the risk to become ill in the global population as well as in the population of affected people. We find that affected people are either at very low risk like the overwhelming majority of the population but still were unlucky to become ill, or are at extremely high risk and were bound to become ill.

Many ligands directly target adenosine receptors (ARs). Here we review the effects of noncanonical AR drugs on adenosinergic signaling. Non-AR mechanisms include raising adenosine levels by inhibiting adenosine transport (e.g. ticagrelor, ethanol, cannabidiol), affecting intracellular metabolic pathways (e.g. methotrexate, nicotinamide riboside, salicylate, 5‐aminoimidazole‐4‐carboxamide riboside), or undetermined means (e.g. acupuncture). Yet other compounds bind ARs in addition to their canonical ‘on-target’ activity (e.g. mefloquine). The strength of experimental support for an adenosine-related role in a drug’s effects varies widely. AR knockout mice are the ‘gold standard’ method for investigating an AR role, but few drugs have been tested in these mice. Given the interest in AR modulation for treatment of cancer, CNS, immune, metabolic, cardiovascular, and musculoskeletal conditions, it is informative to consider AR and non-AR adenosinergic effects of approved drugs and conventional treatments.

Soybean are vulnerable to drought and temperature increases potentially induced by climate change. The purpose of this study was to determine if the use of cover crops (CC) can influence the gas exchange potential of glyphosate tolerant soybean when the vapor pressure deficit (Vpd) increases. This two years study was conducted in an open experimental field comprising Direct Seeding plots without CC (DS) or with CC (DSCC). Stomatal conductance (Gs) was measured five times on the same identified leaves following GBH application. These leaves were then collected in order to observe the stomata (size, density and stomatal index) with a scanning electron microscope and to perform measurements on foliar traits (venation density, width of midrib). The Vpd was calculated concomitantly to Gs measurements at the leaf surface. The results suggest that the use of CC promotes phenotypic change in soybean leaves (more elaborate venation and a higher stomatal density), which in turn may enhance their tolerance to drier conditions. In 2019, Gs could be up to 29% higher in DSCC plots compared to DS ones along with similar Vpd values. This study shows that the benefits of using CC can be observed through the morphological development strategies of the crop plants and their higher tolerance to drought.

Protected areas have been used worldwide to conserve natural resources. Nevertheless, economic activities to provide income for communities living inside and surrounding conservation areas remain an issue. This study aimed to assess the sustainability of a Deuterodon iguape hatchery, placed inside an Atlantic Rainforest Park, to leverage this small native fish's grow-out farming, affording income and food security for local families. We have used a set of indicators of economic, social, and environmental sustainability. The initial investment is about US$ 40,000, which returned in ~2 years. The internal rate of return is close to 50%, including the externality costs, which is attractive for public and private investments. The hatchery generated few direct jobs, but the workforce can be recruited in the community, and hatchery can enable the establishment of several small grow-out farms, leveraging the development of indirect jobs and self-employments. The system had a low environmental impact, showing minor release of pollutants, low risk for biodiversity, and absorption of 18 g of CO2 equivalent per thousand post-larvae produced, contributing to the struggle against climate change. Therefore, D. iguape hatchery demonstrates the potential of combining biodiversity conservation and income generation, meeting the Sustainable Development Goals of Agenda 2030.

The assortment of low-cost 3D printers for “in-practice” use, e.g., for clear aligner therapies, is ever increasing. To address concerns about the accuracy of orthodontic models produced on such printers when cost efficient modes of 3D printing are employed, this study examined the effect of print model body type and print angulation on accuracy. Six printing-configuration groups were included: 2 model types (solid or hollow shell) combined with 3 print angles (0°, 70°, or 90°) with 10 models/group; all models were printed with 100-µm layer thickness using a digital light processing-based 3-dimensional printer. Eleven selected structures and distances were measured on the printed models with a digital microscope and compared to the same measures on a digitized master model. The clinically-acceptability range was set at ±0.25 mm difference from the master model for single tooth measurements (intra-tooth) and ±0.5 mm for cross-arch measurements (inter-tooth). For individual measurements across all models, 98% fell within clinical acceptability. For mean measurements within each model group, only canine height for the shell-0° model had a mean difference (0.26 mm ± 0.03) outside the clinically acceptable range for intra-tooth measurements. Standard deviations for all intra-tooth measurements were within 0.07 mm. While none of the mean inter-tooth measurements exceeded the acceptability range, the standard deviations were larger (0.04 to 0.30 mm). Accuracy of orthodontic models for clear aligner therapies was not impacted beyond the clinically acceptable range when altering model body type and print angulation to improve efficiency of 3D printing. These findings suggest greater flexibility of the practitioner to alter print settings to address time and cost efficiency in various clinical scenarios and still maintain clinically acceptable model accuracy.

Infant cry is evolutionarily, psychologically, and clinically significant. During the last 60 years, several researchers and clinicians assessed the possibility of investigating the acoustical properties of cry for medical purposes. However, there is a lack of standardization in conducting and reporting cry-based studies. In this work, methodologies and procedures employed in infant cry analysis are reviewed, and best practices for reporting studies are provided. First, available literature on vocal and audio acoustic analysis have been examined to identify critical aspects of participant information, data collection, methods, and data analysis. Then, 180 peer-reviewed research articles have been assessed to certify the presence of identified critical information. Results show a general lack of critical description. Researchers in the field of infant cry need to agree on a standard set of criteria to report experimental studies, to better demonstrate the validity of the methods and obtained results.

We previously reported that in multiple sclerosis (MS) patients with a progressive form of the disease, spinal cord periplaques extend distance away from plaque borders and are characterized by the co-occurrence of partial demyelination, astrocytosis and low-grade inflammation. However, transcriptomic analyses comparing periplaques to adjacent normal-appearing white matter (NAWM) areas did not allow providing a comprehensive view of molecular events in astrocytes vs oligodendrocytes. Here, we re-assessed our transcriptomic data with the aim of identifying functionally-relevant co-expression networks that would reflect astrocyte vs oligodendrocyte molecular signatures in periplaques. We identified an astrocytosis-related gene module comprising GFAP, the hub gene CX43/GJA1 and a set of transcripts forming a TGFB/SMAD1/SMAD2 genomic signature. Partial demyelination was characterized by a co-expression network which, besides myelin genes, comprised a highly significant number of translation/elongation-related genes. Interestingly, the main oligodendrocyte-related hub we identified was NDRG1, a gene previously shown to be specifically silenced in the NAWM of MS patients. This result indicated that NDRG1 down-regulation could be an important event in the process of periplaque partial demyelination. To establish a putative link between NDRG1 down-regulation and a cytokine/chemokine signature, we then sought to identify cytokine/chemokine genes whose mRNA levels inversely correlated with those of NDRG1. Following this approach we found 5 candidate immune-related genes whose up-regulation associated with NDRG1 down-regulation: TGFB1, PDGFC, IL-17D, IL-33, and IL-12A. From these results we propose that in the spinal cord of MS patients with progressive forms of the disease, TGFB1 may limit acute inflammation but concurrently induce astrocytosis and an alteration of oligodendrocytes terminal differentiation.

This paper establishes methods that quantify the structure of statistical interactions within a given data set using the characterization of information theory in cohomology by finite methods, and provides their expression in terms of statistical physic and machine learning. Following [1–3], we show directly that k multivariate mutual-informations (I_k) are k-coboundaries. The k-cocycles are given by I_k = 0, which generalize statistical independence to arbitrary dimension k. The topological approach allows to investigate Shannon’s information in the multivariate case without the assumptions of independent identically distributed variables. We develop the computationally tractable subcase of simplicial information cohomology represented by entropy H_k and information I_k landscapes. The I₁ component defines a self-internal energy functional U_k, and (−1)^k I_k,k≥2 components define the contribution to a free energy functional G_k of the k-body interactions. The set of information paths in simplicial structures is in bijection with the symmetric group and random processes, provides a topological expression of the 2nd law and points toward a discrete Noether theorem (1st law). The local minima of free-energy, related to conditional information negativity and the non-Shannonian cone of Yeung [4], characterize a minimum free energy complex. This complex formalizes the minimum free-energy principle in topology, provides a definition of a complex system, and characterizes a multiplicity of local minima that quantifies the diversity observed in biology. Finite data size effects and estimation bias severely constrain the effective computation of the information topology on data, and we provide simple statistical tests for the undersampling bias and for the k-dependences following [5]. We give an example of application of these methods to genetic expression and cell-type classification. The maximal positive I_k identifies the variables that co-vary the most in the population, whereas the minimal negative I_k identifies clusters and the variables that differentiate-segregate the most. The methods unravel biologically relevant I₁₀ with a sample size of 41. It establishes generic methods to quantify the epigenetic information storage and a unified epigenetic unsupervised learning formalism.

Metal additive manufacturing technologies have large potential for future use in load bearing aerospace applications, requiring a deeper understanding of mechanical performance and influencing factors. The objective of this study is to manufacture fatigue specimens by laser powder bed fusion with comparable bulk and different as-built surface quality (without post-processing). This goal was pursued by using identical bulk/hatch scan parameters while varying contour scan parameters. The bulk quality was evaluated by density measurements according to Archimedes’ principle and tensile testing. The surfaces were investigated using the optical fringe projection method and surface quality was assessed by the areal surface texture parameters Sa (arithmetic mean height) and Sk (core height, derived from material ratio curve). The resulting mean values of max (ultimate tensile strength) were between 375 and 405 MPa, which is a variation of roughly 8%, for seven different surface conditions. It could be confirmed that the influence of contour scan variation on bulk quality is insignificant for the assessed samples.

Fungal keratitis (FK) is an invasive infection of the cornea primarily associated with Aspergillus and Fusarium species. FK is treated empirically with a limited selection of topical antifungals with varying levels of success. Though clinical infections are typically characterized by a dense network of mature mycelium, traditional models used to test antifungal susceptibility of FK isolates exclusively evaluate susceptibility in fungal cultures derived from asexual spores known as conidia. The purpose of this study was to characterize differences in fungal response when topical antifungal treatment is initiated at progressive phases of fungal development. We compared efficacy of voriconazole and luliconazole against in vitro cultures of A. flavus and F. keratoplasticum at 0, 24, and 48 h of fungal development. A porcine cadaver corneal model was used to compare antifungal efficacy of voriconazole and luliconazole in ex vivo tissue cultures of A. flavus and F. keratoplasticum at 0, 24, and 48 h of fungal development. Our results demonstrate phase-dependent susceptibility of both A. flavus and F. keratoplasticum to both azoles in vitro as well as ex vivo. We conclude that traditional antifungal susceptibility testing with conidial suspensions does not correlate with fungal susceptibility in cultures of a more advanced developmental phase. A revised method of antifungal susceptibility testing that evaluates hyphal susceptibility may better predict fungal response in the clinical setting where treatment is often delayed until days after the initial insult.

Species data of 249 National Nature Reserves in China was used to identify potential underlying drivers of latitudinal gradients in plant diversity. We used generalized linear models (GLMs) to assess the correlations between predictor and response variables. We also used SAM (Spatial Analysis in Macroecology) to eliminate autocorrelation along each of the 249 studied locations. We used the Akaike information criterion (AICc; Montoya et al. 2007) to select the independent variables were those included in the best models from different combinations of climate, habitat and animal variables. Variance partitioning was used to decompose the variation in plant richness across different taxonomic levels among the three groups of predictors. We found that: Total plant species, gymnosperms, angiosperms and ferns showed significant latitudinal trends in richness (p < 0.001). Water-energy and habitat variables generally explained more variation in richness across different plant groups than did animal richness. Annual precipitation was selected as the best water-energy variable across different taxonomic plants groups, soil PH and elevation range were selected as the best habitat variables across different taxonomic plant groups. The independent effects of habitatvariables were higher than that of water-energy and animal variables across different taxonomic plants groups. Water-energy, habitat heterogeneity, and animal variables explain 48.8% of the variation in total species richness, 28.2% in gymnosperm richness, 44.2% in angiosperm richness, and 38.9% in fern richness.Plants showed significant latitudinal trends in richness (p < 0.001). Water-energy and habitat variables generally explained more variation in richness across different taxonomic plants groups than did animal variables. The independent effects of habitat variables were higher than those of water-energy and animal variables across different taxonomic plants groups.

The CAALA (Complex Augmentation of ALA) regimen was developed with the goal of redressing some of the weaknesses of 5-aminolevulinic acid (5-ALA) use in glioblastoma treatment as it now stands. 5-ALA is approved for use prior to glioblastoma surgery to better demarcate tumor from brain tissue. 5-ALA is also used in intraoperative photodynamic treatment of glioblastoma by virtue of uptake of 5-ALA and its selective conversion to protoporphyrin IX in glioblastoma cells. Protoporphyrin IX becomes cytotoxic after exposure to 410 nm or 635 nm light. CAALA uses four currently marketed drugs - the antibiotic ciprofloxacin, the iron chelator deferiprone, the antimetabolite 5-FU, and the xanthine oxidase inhibitor febuxostat - that all have evidence of ability to both increase 5-ALA mediated intraoperative glioblastoma demarcation and photodynamic cytotoxicity of in situ glioblastoma cells. Data from testing the full CAALA on living minipigs xenotransplanted with human glioblastoma cells will determine safety and potential for benefit in advancing CAALA to a clinical trial.

Alfalfa (Medicago sativa L.) is a perennial, outcrossing legume crop predominantly grown for hay, silage, or pasture. Intensive selection has resulted in dramatic improvement in fitness traits, including winter survival and disease resistance. However, there has been minimal improvement in other economically important traits, such as hay yield, which is still comparable to 30 years ago. Intensive phenotyping costs on this type of trait hinder high selection pressure to identify superior outcross individuals. Severe inbreeding depression inhibits the development of inbred lines with accumulated favorable alleles that exhibit heterosis. This review highlights the outcomes of inbreeding depression as well as the causes, including unmasking deleterious alleles and triggering self-incompatibility. We tracked the research efforts that unveil the genetic bases underlying deleterious alleles and self-incompatibility. The magnitudes of inbreeding depression were compared with the rate of heterozygous halved time in diploid and tetraploid organisms. To fill in the gaps between the controversy and existing hypotheses, we theorized a dosage dominant model of inheritance. The dosage dominant model is similar to the Mendelian dominance model, in which a genotype exhibits a dominant phenotype if there is a dominant allele (alphabet dominant). The difference is that in the dosage dominant model, a genotype will result in a dominant phenotype if the number of dominant alleles is equal to or greater than the number of recessive alleles. This review also includes a discussion on the development of pseudo inbreds and a hypothesis to identify deleterious alleles using bulked segregant analysis and consequently to purge deleterious alleles using marker-assisted selection, to progress toward the successful development of pure inbred lines in alfalfa.

Phytoremediation, a method of phytomanagement using the plant holobiont to clean up polluted soils, is particularly effective for degrading organic pollutants, such as alkanes and polycyclic aromatic hydrocarbons (PAHS). However, the respective contributions of host plants and their associated microbiota within the holobiont to the efficiency of phytoremediation is poorly understood. Identification of plant-associated bacteria capable of efficiently utilizing these compounds as carbon source while stimulating plant-growth, is a keystone for phytomanagement engineering in order to improve the efficiency of pollutant removal. In this study, we sampled the rhizosphere and the surrounding bulk soil of Salix purpurea and Eleocharis obusta from the site of a former petrochemical plant in Varennes, QC, Canada. Our objectives were to: (i) isolate and identify indigenous bacteria inhabiting these biotopes; (ii) assess the ability of isolated bacteria to utilize alkanes (dodecane and hexadecane) and PAHs (naphthalene, phenanthrene and pyrene) as the sole carbon source, and (iii) determine the plant growth-promoting (PGP) potential of the isolates using five key traits. A total of 438 morphologically different bacterial isolates were obtained, purified, preserved and identified through PCR and 16S rRNA gene sequencing. Identified isolates represent 62 genera, including taxa such as Acinetobacter, Arthrobacter, Bacillus, Enterobacter, Nocardia, Pseudomonas, Rhodococcus, Streptomyces and Variovorax. Approximately, 32% of bacterial isolates, including Arthrobacter, Pseudomonas, Streptomyces, Enterobacter, Nocardia, Acinetobacter and Microbacterium, were able to utilize all five different hydrocarbons compounds. Additionally, 5% of tested isolates belonging to genera Pseudomonas, Acinetobacter, Serratia, Klebsiella, Microbacterium, Bacillus and Stenotrophomonas possessed all five of the tested PGP functional traits. This culture collection of diverse, petroleum-hydrocarbon degrading bacteria, with multiple PGP traits, represents a valuable resource for future use in environmental bio- and phyto-technology applications, including phytoremediation of petroleum hydrocarbons contaminated soils and phytomanagement of anthropized areas.

Efficient train driving plays a vital role in reducing the overall energy consumption in the railway sector. An energy minimising control strategy can be computed using the framework given by optimal control theory, in particular the Pontryagin maximum principle. Our optimisation approach is based on an algorithm presented by Khmelnitsky that considers electric trains equipped with regenerative braking. A derivation of Khmelnitsky’s theory from a more general formulation of the maximum principle is given in this article, and a complete list of switching cases between different driving regimes has been included that is essential for practical application. A number of numerical examples are added to visualise the various switching cases. Energy consumption data from real-life operation of passenger trains are compared to the calculated energy minimum. In the presented study, the optimised strategy was able to save 37 percent of the average energy demand of the train in operation.

Surfaces of additively manufactured metal parts from powder-based processes typically show powder particle agglomerations and other features, resulting in high surface roughness. Proper characterization of those surfaces is necessary in order to assess part quality with respect to coatability, mechanical performance or corrosion resistance for use in aerospace, automotive, medical and more industrial applications. Optical surface texture measurement allows for collection of areal surface data, while the established contact stylus method only captures line profile data. When applying optical methods for surface topography measurements, proper data acquisition and post-processing in order to assess surface texture may be complex. A number of variables can be adjusted, such as different measurement settings, approaches to outlier removal, evaluated area size or form removal. This work shows the influence of selected z-range prior to measurement and the influence of choosing pre-defined outlier removal settings in MountainsMap 9.2 on selected ISO 25178-2:2022 parameters calculated from data obtained from confocal microscopy for as-built Ti6Al4V from laser powder bed fusion. The aim is to show the influence of variation in measurement and post-processing on calculated surface texture parameters and stress the importance of proper documentation in order to achieve reproducibility of data for quality management.

The energy sensor AMP-activated protein kinase (AMPK) is a key player in the control of energy metabolism. AMPK regulates hepatic lipid metabolism through the phosphorylation of its well-recognized downstream target acetyl CoA carboxylase (ACC). Although AMPK activation is proposed to lower hepatic triglyceride (TG) content via the inhibition of ACC to cause inhibition of de novo lipogenesis and stimulation of fatty acid oxidation (FAO), its contribution to the inhibition of FAO in vivo has been recently questioned. We generated a mouse model of AMPK activation specifically in the liver achieved by expression of a constitutively active AMPK using adenoviral delivery. Indirect calorimetry studies revealed that liver-specific AMPK activation is sufficient to induce a reduction in the respiratory exchange ratio and an increase in FAO rates in vivo. This led to a more rapid metabolic switch from carbohydrate to lipid oxidation during the transition from fed to fasting. Finally, mice with chronic AMPK activation in the liver display high fat oxidation capacity evidenced by increased [C14]-palmitate oxidation and ketone body production leading to reduced hepatic TG content and body adiposity. Our findings suggest a role for hepatic AMPK in the remodeling of lipid metabolism between the liver and adipose tissue.

In this work, an embroidered textile moisture sensor is presented. The sensor is based on a capacitive interdigitated structure embroidered on a cotton substrate with an embroidery conductor yarn composed by 99% pure silver plated nylon yarn 140/17 dtex. In order to evaluate the sensor sensitivity, the impedance of the sensor has been measured by means of a LCR meter from 20 Hz to 20 kHz on a climatic chamber with a sweep of the relative humidity from 25% to 65% at 20 ºC. The experimental results show a clear and controllable dependence of the sensor impedance with the relative humidity. Moreover, the reproducibility of the sensor performance subject to the manufacturing process variability and washing process is also evaluated. The results show that the manufacturing variability introduce a moisture measurement error up to 4%. The washing process impact on the sensor behavior after applying the first washing cycle implies a sensitivity reduction higher than 14%. Despite these effect, the textile sensor keeps its functionality and can be reused in standard conditions. Therefore, these properties point out the usefulness of the proposed sensor to develop wearable applications on health and fitness scope including the user needs to have a life cycle longer than one-time use

In this paper we explore extending the concept of common cross-study Common Data Element concepts beyond simple demographics to cover disease-specific concepts relevant to imaging. We test interactively linking the resulting database to the associated images in a federated manner. We examine the use of existing standards, not only for terminology, but for interchange of serialized data in forms familiar to imaging and clinical trials specialists and their dedicated systems. Our intent is to perform preliminary work to inform both the upcoming Imaging Data Commons specifically, as well as more general integration projects beyond imaging.

Freshwater pond aquaculture is the prevailing fish culture system worldwide, especially in developing countries. Climate change outcomes and inadequate environmental practices challenge its sustainability. This study applies emergy synthesis to assess the environmental performance of freshwater pond aquaculture in Brazil, aiming to identify and propose practices towards sustainability. As a study model, nine semi-intensive lambari farms operating at three levels of management were evaluated: low (LC), moderate (MC) and high (HC) control. Results showed that the main inputs for LC were services (27-46%), feed (7-39%), and water (15-21%), while for the MC and HC farms, they were feed (35-49% and 17-48%, respectively) and services (33-39% and 26-36%, respectively). All farms required more than 60% of their emergy from purchased inputs, resulting in low emergy sustainability index (ESI = 0.1-0.5). Replacing animal protein and oil on diet composition by vegetal sources, using superficial water instead of springwater, increasing juvenile productivity, and controlling pond fertilization can lead all systems to higher efficiency and resilience, increasing sustainability.

Introduction: The association of gene variants for interleukin 6(IL-6) (rs1800796), interleukin 10 (IL-10) (rs1800896) and tumor necrosis factorα (TNFα (rs1800629) with the occurrence of spontaneous preterm birth (PTB) was investigated to determine whether these genetic variants are a risk factor. Materials and methods: 199 blood samples from pregnant women who had given birth prematurely and 200 control blood samples were analyzed to determine single nucleotide polymor-phisms (SNPs) of genes for IL-6 (rs1800796), IL-10 (rs1800896) and TNFα (rs1800629). The control samples were samples from pregnant women with term delivery. Isolation of DNA was per-formed on mini-spin columns according to the manufacturer's protocol. The quality and purity of the isolated DNA were tested using a Qubit 3 fluorometer. Genotyping was performed with an ABI PRISM 7500 SDS using TaqMan SNP genotyping assays. The genotypes obtained were an-alyzed using the 7500 Software v2.3 package. Results: Carriers of the A/A genotype for the rs1800629 of the TNFα gene have 4.81 times greater chance of late-onset PTB compared to carriers of the G/G and A/G genotypes in the recessive inheritance model. The presence of the G/G genotype in the recessive inheritance model compared with the G/A and A/A genotypes for the rs1800896 of the IL-10 gene represents a potentially protective factor, with mothers in the term-birth group having an almost 2-fold lower odds of PTB in general and an almost 10-fold lower odds of early PTB. On the other hand, carriers of the A/G genotype of rs1800896 have a 1.54-fold higher chance of preterm birth in general and a 1.6-fold higher chance of late preterm birth in the super dominant inheritance model compared to the A/A and G/G genotypes in the group of mothers with PTB. In this study, no association was found between PTB and rs1800796 of the IL-6 gene. Conclusion: rs1800629 in mothers was associated with PTB. rs1800896 shows a potentially protective effect for the occurrence of PTB in this study. No association was found between PTB and rs1800796.

In recent years, electrochemical methods utilizing reactive electrochemical membranes (REM) have been recognized as the most promising technologies for the removal of organic pollutants from water. In this paper, we propose a 1D convection-diffusion-reaction model concerning the transport and oxidation of oxalic acid (OA) and oxygen evolution in the flow-through electrochemical oxidation system with REM. It allows the determination of unknown parameters of the system by treatment of experimental data and predicts the behavior of the electrolysis setup. There is a good agreement in calculated and experimental data at different transmembrane pressures and initial concentrations of OA. The model provides an understanding of the processes occurring in the system and gives the concentration, current density, potential and overpotential distributions in REM. The dispersion coefficient was determined as a fitting parameter and it is in good agreement with literary data for similar REMs. It is shown, that the oxygen evolution reaction plays an important role in the process even under the kinetic limit, and its contribution decreases with increasing total organic carbon flux through the REM.

The investigation of the electromagnetic properties of biological particles in microfluidic platforms may enable wireless monitoring and interaction with functional activity of microorganisms. Of high relevance is the membrane potential as it is one of the most important parameters of living cells. In particular, the complex mechanisms of the cell’s membrane potential are comparable to the dynamics of bacteria membranes, providing a simplified platform for advancing the current techniques and knowledge of general bio-particle dynamics. In this work, we provide a theoretical analysis and experimental results on the microwave detection of bacteria on a microfluidic-based framework for sensing the membrane potential of bacteria. The results enable to further advance the state-of-the-art of electromagnetic bacteria sensing and microfluidic control, and their implication for measuring and interacting with the cell and its membrane potentials, which is of great importance for developing new biotechnological engineered systems and solutions.

This bibliometric review is aimed to analyze the top 100 most-cited publications in dentistry and to compare its outcomes with similar analysis done by Feijoo et al., [1]. A literature search was performed using the Elsevier's Scopus without any restriction of language, publication year or study design. Of 336381 articles, the top 100 were included based on their citation count which ranged from 638 to 4728 citations (Feijoo et al., 326 to 2050). Most productive decade was the 2000s with 40 articles on the list (Feijoo et al., 1980s: 26). Marx RE (7%) was the major contributor in this study (Feijoo et al., Socransky SS: 9%) and a whopping 48% articles generated from the USA. 26% of top 100 articles focused periodontology (Feijoo et al., periodontology: 43%), while 17% of the total were published in the Journal of Dental Research (Feijoo et al., Journal of Clinical Periodontology: 20%). Most of the publications were narrative reviews/expert opinion (36%), (Feijoo et al., case series: 22%) and were within the evidence level V (64%) (Feijoo et al., 54%). The citation count that a paper secures is not necessarily a reflection of research's quality, however, the current analysis provides latest citation trends in dentistry.

Currently, SARS-CoV-2 infection which is the causative agent for COVID-19 disease is a worldwide pandemic with more than 100 million global cases and more than 2.0 million deaths (as of January, 2021). While several vaccines for prevention of COVID-19 have already been registered by the regulatory authorities, the problem is that the substitution rate of this virus is estimated to be one change per 2 weeks, thus mutations could arise that threaten the efficacy of vaccines. Unfortunately, there is no current evidence from random clinical trials to recommend any specific post-exposure treatment for patients with suspected or confirmed COVID-19 disease. Here we propose an innovative superinfection therapeutic (SIT) strategy, which could complement the development of prophylactic vaccines. SIT is based on clinical observations that unrelated harmless viruses might interact in patients infected with pathogenic virus. During SIT, the patient benefits from superinfection with an apathogenic double-stranded RNA (dsRNA) virus such as the infectious bursal disease virus (IBDV), which is a powerful activator of the interferon-dependent antiviral gene program. An attenuated vaccine strain of IBDV was already successfully administered to resolve acute and persistent infections induced by two completely different viruses, the hepatitis B (DNA) and C (RNA) viruses (HBV/HCV). The safety of orally administered acid-resistant IBDV strain R903/78 reverse engineered viral drug candidate was demonstrated in 10 stage IV cancer patients who exhausted all conventional therapy. Following repeated oral administration of the virus up to 10⁹ infectious units (IU)/ dose, only mild flu-like side effects were reported in some patients. Proof-of-principle efficacy was demonstrated in an early COVID-19 patient who was successfully treated with 3x10⁶ IU of an attenuated IBDV vaccine. A small scale dose-finding Phase I safety study is proposed.

Porphyrinic photosensitizers (PSs) and their nano-sized polymer-based carrier systems are required to exhibit low dark toxicity, avoid side effects, and ensure high in vivo tolerability. Yet, little is known about the intracellular fate of PSs during the dark incubation period and how it is af-fected by nanoparticles. In a systematic study, high resolution magic angle spinning NMR spectroscopy combined with statistical analyses was used to study the metabolic profile of cultured HeLa cells treated with different concentrations of the PS chlorin e4 (Ce4) alone or encapsulated in carrier systems. For the latter, either polyvinylpyrrolidone (PVP) or the micelle forming polyethylene glycol (PEG)-polypropylene glycol triblock copolymer Kolliphor P188 (KP) were used. Diffusion edited spectra indicated Ce4 membrane localization evidenced by Ce4 concentration dependent chemical shift perturbation of the cellular phospholipid choline resonance. The effect was also visible in the presence of KP and PVP, but less pronounced. The appearance of the PEG resonance in the cell spectra pointed towards cell internalization of KP whereas no conclusion could be drawn for PVP that remained NMR-invisible. Multivariate statistical analyses of the cell spectra (PCA, PLS-DA and oPLS) revealed a concentration-dependent metabolic response upon exposure to Ce4 that was attenuated by KP and even more by PVP. Significant Ce4-concentration dependent alterations were mainly found for metabolites involved in the tricarboxylic acid cycle and the phosphatidylcholine metabolism. The data underline an important protective role of the polymeric carriers following cell internalization. Moreover, the current study allowed - to our knowledge for the first time - to trace the intracellular PS localization on an atomic level by NMR methods.

Rationale:First discovered in 1990, the endocannabinoid system (ECS) was initially shown to have an intimate relationship with central areas of the nervous system associated with pain, reward, and motivation. Recently, however, the ECS has been extensively implicated in the cardiovascular system with contractility, heart rate, blood pressure, and vasodilation. Emerging data demonstrates modulation of the ECS plays an essential role in cardio metabolic risk, atherosclerosis, and can even limit damage to cardiomyocytes during ischemic events.Patient Concerns:This case describes a 63-year-old male who presented to a primary care physician for a medical cannabis (MC) consult due to unstable angina (UA) not relieved by morphine or cardiac medications; having failed all first- and second-line poly-pharmaceutical therapies. The patient reported frequent, unprovoked, angina and exertional dyspnea.Diagnosis:Having a complex cardiac history, the patient first presented 22 years ago after a suspected myocardial infarction (MI). He re-presented in 2010 and underwent stent placement at that time for inoperable triple-vessel coronary artery disease (CAD) which was identified via percutaneous transluminal coronary angioplasty. UA developed on follow up and, despite medical management over the past 6 years, his UA became progressively debilitating.Interventions and Outcomes:In conjunction with his standard cardiac care, patient had a gradual lessening of UA related pain, including frequency and character, after using an edible form of medical cannabis (MC) (1:1 CBD:THC). Following continued treatment, he ceased long term morphine treatment and describes the pain as no longer crippling. As demonstrated by his exercise tolerance tests, the patient experienced an improved functional capacity and reported an increase in his daily functioning, and overall activity.Lessons:This case uniquely highlights MC in possibly reducing the character, quality, and frequency of UA; while concordantly improving functional cardiac capacity in a patient with CAD. Additional case reports are necessary to verify this.

Rutin has been reported as a potential anti-cancer agent for several decades. This study evaluated the effects of rutin on the proliferation, metastasis, and angiogenesis of MDA-MB-231 and MCF-7 breast cancer cell lines. Increasing concentrations of rutin significantly stimulated the proliferation of MDA-MB-231 and MCF-7 cells compared to controls. Wound scratch assay demonstrated that rutin had an inducing effect on the migration of the cells. In MDA-MB-231 and MCF-7 cells, rutin upregulated MKI67, VIM, CDH2, FN1, and VEGFA and downregulated CDH1 and THBS1 genes. It also increased N-cadherin and VEGFA and decreased E-cadherin and thrombospondin 1 protein expression. Our data indicated that rutin could stimulate proliferation, migration, and pro-angiogenic activity in two different breast cancer cell lines. This phytoestrogen induced invasion and migration of both cell lines by a mechanism involving the EMT process. This suggests that rutin may act as a breast cancer-promoting phytoestrogen.

Despite the recognized benefits of fecal occult blood test (FOBT) and mammography screenings, participation in breast (BC) and colorectal cancer (CRC) screening programs is still suboptimal. This study investigates municipal characteristics associated with their BC/CRC screening uptake profiles among women aged 55–69 years. Using data from 308 municipalities of Flanders from 2014 to 2017, a profile for each municipality based on its BC/CRC screening uptake compared with the median screening uptake was created. Logistic regression with generalized estimating equations was used to assess the associations between municipal characteristics and BC/CRC screening uptake profiles. The overall median uptake of cancer screening was higher for CRC (57.4%) than for BC (54.6%). The following municipal characteristics were associated with worse performance in terms of only CRC, only BC, or both CRC and BC screening uptake, respectively: foreign nationality, self-employment rate, (early) retirement rate, diabetes, disabilities; (early) retirement rate; age group 65–69, foreign nationality, self-employment rate, (early) retirement rate, wage-earners, diabetes. The following municipal characteristics were associated with better performance in terms of only CRC, only BC, or both CRC and BC screening uptake respectively: residential stability, having a partner, having children, jobseeker rate, GP visits, preventive dental visits; having children, GP visits; age group 55–59, residential stability, having a partner, having children, jobseeker rate, higher education, GP visits, preventive dental visits. This study’s results regarding the interrelation between the BC and CRC screening could be used to tailor interventions to improve the participation of the target population in both programs.

Gyroscopes are fascinating instruments with a history of about 200 years. When J.G.F. Bohnenberger presented his machine to his students in 1810 at the University of Tuebingen, Germany, nobody could have foreseen that this fascinating development would be used for complex orientation and positioning. At the University of Stuttgart, Germany, a collection of 160 exhibits is available and in transition for a sustainable future. Here, the systems are digitized in 2D, 2.5D and 3D and are made available for a world-wide community using OpenAccess platforms. The technologies being used are Computed Tomography, Computer Vision, Endoscopy and Photogrammetry. The workflows for combining voxel representations and colored point clouds are described, to create Digital Twins of the tangible assets. Advantages and disadvantages are discussed und work for near future is outlined in this new and challenging field of Tech Heritage digitization.

Soil contamination with petroleum hydrocarbons (PHCs) has become a global concern in the word due to intensification of industrial activities. This creates a serious environmental issue, therefore there is a need to find solutions, including application of efficient remediation technologies, or to improve current techniques. Rhizoremediation is a sub-category of the phytoremediation which refers to Phytomanagement that uses plants and their associated microbiota. These green technologies have received a global attention as a cost-effective and possible efficient remediation technique that can be applied to cleanup PHCs-polluted soils. The mechanism of rhizoremediation process is that plant roots stimulate soil microbes to mineralize organic contaminants to H2O and CO2. However, this multipartite interaction is much complex because many biotic and abiotic factors can influence microbial processes in the soil, making the efficiency of rhizoremediation unpredictable. This review reports the progress made on rhizoremediation approaches that can overcome the limitations and improve the efficiency of PHCs-contaminated soils. The addressed approaches in this review include: 1) selecting plants with desired characteristics suitable for rhizoremediation, 2) the exploitation and manipulation of plant microbiome by using inoculant containing plant growth-promoting rhizobacteria (PGPR) or hydrocarbon-degrading microbes, or a combination of both types of organisms, and 3) enhancement of the understanding of how host-plant assembles a beneficial microbiome, and how it functions, under pollutant stress.

Titanium oxynitride thin films are deposited by DC reactive magnetron sputtering. A pure titanium target is sputtered in a reactive atmosphere composed of argon, oxygen and nitrogen gases. The oxygen mass flow rate as well as that of the nitrogen gas are both pulsed during the deposition time using an independent and rectangular signal for each reactive gas. A constant pulsing period T = 45 s is applied for both reactive gases and a delay time  of 34 s between N2 and O2 injection times is set for all depositions. Oxygen and nitrogen duty cycles are systematically and independently changed from 0 to 100% of their pulsing period. From real time measurements of the Ti target potential and total sputtering pressure, it is shown that the reactive process alternates between oxidized, nitrided and elemental sputtering modes as a function of the oxygen and nitrogen injection times. The full poisoning of the Ti target surface by oxygen and/or nitrogen can be avoided for some given ranges of O2 and N2 duty cycles. Deposition rates of titanium oxynitride films are substantially enhanced and can be adjusted between that of pure Ti and TiN films with a gradual transition of their optical transmittance in the visible range. These results support that titanium oxynitride compounds exhibiting absorbent to transparent behaviors can be precisely sputter-deposited by means of a two reactive gases pulsing process.

This paper presents some results from a computational fluid dynamics (CFD) model of a multi-megawatt crosswind kite spinning on a circular path in a straight downwind configuration. The unsteady Reynolds averaged Navier-Stokes equations closed by the k−ω SST turbulence model are solved in the three-dimensional space using ANSYS Fluent. The flow behaviour is examined at the rotation plane, and the overall (or global) induction factor is obtained by getting the weighted average of induction factors on multiple annuli over the swept area. The wake flow behaviour is also discussed in some details using velocity and pressure contour plots. In addition to the CFD model, an analytical model for calculating the average flow velocity and radii of the annular wake downstream of the kite is developed. The model is formulated based on the widely-used Jensen’s model (Technical Report Risø-M; No. 2411, 1983), which was developed for conventional wind turbines, and thus has a simple form. Expressions for the dimensionless wake flow velocity and wake radii are obtained by assuming self-similarity of flow velocity and linear wake expansion. Comparisons are made between numerical results from the analytical model and those from the CFD simulation. The level of agreement was found to be reasonably good. Such computational and analytical models are indispensable for kite farm layout design and optimization, where aerodynamic interactions between kites should be considered.

This study investigated the associations of imageability with fear reactivity. Imageability ratings of four word classes: positive and negative (i) emotional and (ii) propriosensitive, neutral and negative (iii) theoretical and (iv) neutral concrete filler, and fear reactivity scores – degree of fearfulness towards different situations (TF score) and total number of extreme fears and phobias (EF score), were obtained from 171 participants. Correlations between imageability, TF and EF scores were tested to analyze how word categories and their valence were associated with fear reactivity. Imageability ratings were submitted to recursive partitioning. Participants with high TF and EF scores had higher imageability for negative emotional and negative theoretical words. The correlations between imageability of negative emotional words and negative theoretical words for EF score were significant. Males showed stronger correlations for imageability of negative emotional words for EF and TF scores. High imageability for positive emotional words was associated with lower fear reactivity in females. These findings were discussed with regard to negative attentional bias theory of anxiety, influence on emotional systems, and gender-specific coping styles. This study provides insight into cognitive functions involved in mental imagery, semantic competence for mental imagery in relation to fear reactivity, and a potential psycholinguistic instrument assessing fear tendency.

Structural diversity is a key feature of forest ecosystems that influences ecosystem functions from local to macroscales. The ability to measure structural diversity in forests with varying ecological composition and management history can improve the understanding of linkages between forest structure and ecosystem functioning. Terrestrial LiDAR has often been used to provide a detailed characterization of structural diversity at local scales, but it is largely unknown whether these same structural features are detectable using aerial LiDAR data that are available across larger spatial scales. We used univariate and multivariate analyses to quantify cross-compatibility of structural diversity metrics from terrestrial versus aerial LiDAR in seven National Ecological Observatory Network sites across the eastern USA. We found strong univariate agreement between terrestrial and aerial LiDAR metrics of canopy height, openness, internal heterogeneity, and leaf area, but found marginal agreement between metrics that describe heterogeneity of the outer most layer of the canopy. Terrestrial and aerial LiDAR both demonstrated the ability to distinguish forest sites from structural diversity metrics in multivariate space, but terrestrial LiDAR was able to resolve finer-scale detail within sites. Our findings indicate that aerial LiDAR can be of use in quantifying broad-scale variation in structural diversity across macroscales.

Understanding and predicting damage progression within thin plain-woven CFRP components is an essential issue for scheduling maintenance intervals and structural inspections, and typically require extensive test series. However, uncertainties always remain and result in conservative design and unnecessary downtimes due to the repeated inspections of a healthy structure. SHM can be used to reduce these uncertainties, as it allows to evaluate the condition of a mechanical structure during operation. Numerous SHM methods are developed , that achieve different levels of damage identification but are often investigated at small coupons with non-realistic structural damages and loading conditions on both, structure and sensor. The present research investigates the electrical impedance tomography (EIT) featuring an elastoresistive thin-film sensor to evaluate damage that propagates from a circular hole in a large plate under cyclic tensile-tensile multi-block loading. Applied fatigue loads were increased multiple times up to a total number of two million cycles. During the loading damage initiated at the hole and continuously propagated into the plate. Repeated EIT evaluations of the applied sensor and validating evaluations by means of digital image correlation clearly revealed the robustness of the hardware and the potential of the SHM method for damage evaluation of plain-woven CFRP components.

In this work, two embroidered textile moisture sensors are characterized with three different conductive yarns. The sensors are based on a capacitive interdigitated structure embroidered on a cotton substrate with an embroidered conductor yarn. The performance comparison of 3 different type of conductive yarns has been addressed. In order to evaluate the sensor sensitivity, the impedance of the sensor has been measured by means of a LCR meter from 20 Hz to 20 kHz on a climatic chamber with a sweep of the relative humidity from 30% to 65% at 20 ºC. The experimental results show a clear and controllable dependence of the sensor impedance with the relative humidity and the used conductor yarns. This dependence points out the optimum conductive yarn to be used to develop wearable applications for moisture measurement.

Windup, a progressive increase in spinal response to repetitive stimulations of nociceptive peripheral fibres, is a useful model to study central sensitization to pain. Windup is expressed by neurons in of both dorsal and ventral horn of the spinal cord. In juvenile rats, it has been demonstrated both in vivo and in vitro that windup depends on calcium-dependent intrinsic properties and their modulation by synaptic components. However, the involvement of these two components in the adult remain controversial. In the present study, by means of electromyographic and extracellular recordings, we show that windup in adult, in vivo, depends on a synaptic balance between excitatory NMDA receptors and inhibitory glycinergic receptors. We also demonstrate the involvement of L-type calcium channels in both the dorsal and ventral horn of the spinal cord. These results indicate that windup in adults is similar to juveniles rats and that windup properties are the same regardless spinal network, i.e. sensory or motor.

An analysis of workplace accidents in the mining sector has been done using the database from the Spanish administration between the period 2005-2015 and applying data mining techniques. Data has been processed by means of the software Weka. Two scenarios were chosen regarding the accidents database, surface and underground mining. The most important variables involved in occupation accidents and their association rules have been determined. These rules are formed by several predictor variables that cause an accident, defining its characteristics and context. This study exposes the 20 most important association rules of the sector, either surface or underground mining, based on statistical confidence levels of each rule obtained by Weka. The outcomes display the most typical immediate causes with the percentage of accident basis of each association rule. The most typical immediate cause is body movement with physical effort or overexertion and type of accident is physical effort or overexertion. On the other hand, the second most important immediate cause and type of accident change in both scenarios. Data mining techniques have been proved as a very powerful tool to find out the root of the accidents, apply corrective measures and verify their effectiveness, either for public or private companies.

In New Orleans, Louisiana the population’s poor baseline health led to its establishment as an early epicenter for severe acute COVID-19. Antici-pating future outbreaks of COVID-19 and other respiratory viruses, we need to identify correlates of outcome, from real clinical experience. 89 patients were recruited into the ClinSeqSer acute COVID-19 longitudinal observational study, from the beginning of the outbreak in March to July 2020. Patients admitted for acute COVID-19 were enrolled in person. The cohort is unique as it is 68% Black, 53% female, of average age of early 60s, and prevalence of obesity and hypertension respectively of 55% and 83%. The outcomes are: 53% severe (20% fatal, 33% non-fatal) and 47% non-severe, with severe defined as death or requiring mechanical ventila-tion or high flow oxygen. Obesity and admit systolic blood pressure (SBP) >140mmHg are each associated with severe outcome and, despite respective sensitivity of 71% and 76%, specificity ~66% for both, and ac-curacy of 60% and 70% by ROC analysis, would likely provide useful predictors of outcome in critically stressed health care systems. We discuss pathophysiologic hypotheses to explain why high admit SBP is observed only in half of patients with pre-COVID hypertension and is associated with severe outcome.