Objective: Elucidate the main clinical aspects of the CANOMAD spectrum. Methods: Bibliographical review trough databases (PubMed, Google Scholar, Orphanet, Oxford Academic) of articles from 1985 (1) to 2019 and later selection of the most applicable of the above, in order to construct a non-systematic review. Conclusion: CANOMAD is a chronic-ataxic autoimmune neuropathy associated with IgM monoclonal gammopathy. The correct diagnosis of this rare and multi-faceted disease will help optimal treatment.

The objective of this review is to do an overview about the current knowledge of Anti Iglon5 Syndrome, a disease that was first described in 2014. The IgLON proteins are a family of cell adhesion molecules and the presence of antibodies against IgLON5 are crucial for diagnosis of Anti IgLON5 Syndrome. This syndrome has an expanded clinical spectrum that involves prominent sleep disorder, progressive bulbar dysfunction, gait instability with abnormal eye movements reminiscent and cognitive deterioration sometimes associated with chorea. The main neuropathological finding is the neuronal loss with hyperphosphorylated tau (p-Tau) protein accumulation at hypothalamus, brainstem tegmentum, hippocampus, periaqueductal gray matter, medulla oblongata and upper cervical cord. The exact pathogenesis is still unclear and involves a neurodegenerative process and autoimmune response. The early diagnosis is important to avoid unnecessary tests and prevent complications. Important resources for diagnosis are the antibody testing of serum and CSF for IgLON5-IgG. The mortality of anti IgLON5 syndrome is high and new studies published described a good response to immune therapy. However, the response to immune therapy depends of some clinical and analytical characteristic. In addition, future studies are needed to thoroughly study the aspects of pathogenesis and treatment of this important pathological syndrome.

Multiple Sclerosis (MS) has a well established link with Epstein-Barr virus (EBV) and a growing association with human endogenous retroviruses (HERVs). In this review, we described how these two pieces may interact in MS pathogenesis

Dengue virus an arbovirus is endemic in an area that comprise almost half of the world's population, contrary to past beliefs that dengue virus differentiate from other neuroinvasive arbovirus due to its lack of neurological invasion and disease related neurological complications excluding hemorrhagic and thromboembolic , the body of evidence have grown to demonstrate a series of neurological manifestations linked to dengue virus with possible mechanisms involving direct virus invasion of the nervous system or immune mediated complications. In this review we provide a wide approach to this neglect but not so rare manifestations of a very common disease.

The emergence of SARS-CoV-2 is a challenge in the actual medical scenario. Besides the classical lung and respiratory disease, patients infected with the virus can present with cardiac injury, and pathogenic mechanisms point to a direct infection of the heart.

The recently emerged coronavirus named Severe Acute Respiratory Syndrome Coronavirus 2 (SARS- CoV-2) is the newest threat to human health. It has already infected more than half a million people worldwide, leading to a lot of deaths. Although it causes mild flu-like disease in most patients, lethality may increase to more than 20% in elderly subjects, especially those with comorbidities, like hypertension, diabetes or lung and cardiac disease, and the mechanisms are still elusive. Common symptoms at the onset of illness are fever, cough, myalgia or fatigue, headache, and diarrhea or constipation. Interestingly, respiratory viruses have also placed themselves as relevant agents for CNS pathologies. Here we discuss several CNS related features, referred by several patients, especially at the beginning of the disease. Thus, we also discuss the possibility by which SARS-CoV-2 may affect the olfactive system of patients, either directly or indirectly.

Introduction: Unlike cigarette smoking, secondhand smoke (SHS) has not been as well described as an environmental risk for Multiple sclerosis (MS) nor as a risk factor for disease progression. We systematically reviewed the association between SHS and the risk of onset and/or progression of MS.Methods: We systematically screened MEDLINE/PUBMED, Science Direct, LILACs, and SCIELO searching for publications between January 1st , 2010, and July 5, 2021 with the following keywords: “multiple sclerosis and smoking”; “multiple sclerosis and passive smoking”; “multiple sclerosis and secondhand smoking”. An 11-year filter was applied from 2010 to 2021. Results: Fifteen articles were included in this review, which consisted of systematic reviews with meta-analysis (N = 2), systematic reviews (N = 2), and observational studies (N = 11). Both meta-analyses reported an impact of SHS on MS onset among secondhand smokers. One of the systematic reviews selected two observational studies showing the association between SHS and MS development, and one study that did not find a significant association between SHS and the risk of MS development. The other systematic review identified selected eight articles showing a relationship between SHS and MS. Seven observational studies reported higher odds of MS onset when associated with SHS. Four observational studies did not show a relationship between SHS and MS onset or progression.Discussion: Most articles showed a positive association between SHS exposure and the risk of developing MS. On the other hand, an association between SHS and a higher risk for MS progression could not be established.

Introduction: Multiple sclerosis (MS) is a demyelinating, chronic, inflammatory and autoimmune disease of the central nervous system (CNS) with axonal degeneration, presenting a progressive and variable course. MS patients usually have complications, such as bladder dysfunction, presence of urinary symptoms and Urinary Tract infection (UTI), which is one of the three most common non-neurological complications in MS patients. Objective: Analyze the most diverse aspects of UTI in MS patients, focusing on risk factors, prevalence, hospitalization and mortality rates of UTIs in this group. Methods: A non-systematic review of articles published on PubMed in the last 10 years with the search terms "Urinary Tract Infection" AND "Multiple Sclerosis". Discussion: MS patients have a high UTI prevalence, mainly due to the occurrence of urinary disorders in these patients. The most common symptoms of UTI in MS patients are urinary urgency, polyuria, nocturia, urinary retention, and incontinence. Escherichia coli, Pseudomonas aeruginosa, and Klebsiella pneumoniae were the most found organisms and treatment is based on antibiotic therapy. Moreover, UTIs can precipitate outbreaks, worsen the disease, causing more damage and a severe neurological condition deterioration. Therefore, UTIs in this group are associated with a high hospitalizations rate and a high mortality rate. Conclusion: UTI represents a great risk and concern in MS patients. The high prevalence, hospitalization rate and mortality rate of UTI in MS is worrying, such as the cause-consequence relationship between UTIs and the use of corticosteroids in outbreaks. Therefore, it is important to be aware of a UTI in this group to make early diagnoses, adequate management, and new infections prevention. Thus, further studies are needed to thoroughly analyze each nuance of this important comorbidity for MS patients.

Lambert-Eaton myasthenic syndrome is a primary autoimmune or paraneoplastic neuromuscular disorder, which causes muscle weakness, areflexia and autonomic disorders through the production of antibodies to voltage-gated calcium channels. Diagnosis may be challenging, yet at the same time extremely important, allowing the detection of a possible underlying malignancy, in cases of paraneoplastic presentation. Some antibodies have good sensitivity and specificity for malignancy and are also discussed. Although most of times being correlated to small cell lung cancer, other types of tumors may be also found in the paraneoplastic syndrome. Misdiagnosis with Myasthenia Gravis may occur and differences between these two disorders are discussed. Therapy choice may vary from each patient depending on drug response and the situation in which the patient is encounter. Overall, the present paper brings a review of Lambert-Eaton, involving the diagnosis, as well as, the pathophysiology, differential diagnosis, tumor investigation and treatment. Also, a brief overview through guidance on therapy during the Corona Virus Disease 2019 pandemic is analyzed.

The time-resolved CIDNP method can provide information about degenerate exchange reactions (DEE) involving short-lived radicals. In the temperature range from 8 to 65°C, the DEE reactions of the guanosine-5’-monophosphate anion GMP(-H)- with the neutral radical GMP(-H)•, of the N-acetyl tyrosine anion NacTyrO- with a neutral radical NacTyrO• and of the tyrosine anion TyrO- with a neutral radical TyrO• were studied. In all the studied cases, the radicals were formed in the reaction of quenching triplet 2,2’-dipyridyl. The reorganization energies were obtained from Arrhenius plots. The rate constant of the reductive electron-transfer reaction in pair GMP(-H)•/TyrO- was determined at T = 25°C. Rate constants of GMP(-H)• radical reduction reactions with TyrO- and NacTyrO- anions calculated by the Marcus cross relation differ from the experimental ones by two orders of magnitude. The rate constants of several other electron transfer reactions involving GMP(-H)-/•, NacTyrO-/•, and TyrO-/• pairs calculated by cross relation agree well with the experimental values. The rate of nuclear paramagnetic relaxation was found for the 3,5 and β-protons TyrO• and NacTyrO•, the 8-proton GMP(-H)• the 3,4-protons DPH• at each temperature. In all cases, the dependences of the rate of nuclear paramagnetic relaxation on temperature are described by the Arrhenius dependence.

There is only a very short reaction time for people to find the best way out of a building in a fire outbreak. Software applications can be used to assist the rapid evacuation of victims; however, this is an arduous task, which requires an understanding of advanced technologies. Since well-known pathway algorithms (such as, Dijkstra, Bellman-Ford and A*) can lead to serious problems over performance, we decided to make use of deep reinforcement learning techniques. A wide range of strategies including a random initialization of replay buffer and transfer learning were assessed in three projects involving schools of different sizes. The results showed the proposal was viable and that in most cases the performance of transfer learning was superior. In addition, the study raised challenges that had to be faced in the future.

Tuberculosis (TB) is an infectious-contagious disease caused by M. tuberculosis (Koch’s bacillus). About one-quarter of the world’s population is infected with that bacillus and at risk of developing TB disease. Latent tuberculosis corresponds to people who have been infected by TB bacteria but are not (yet) ill. The most vulnerable population to TB activation includes HIV infected, drug abuse and autoimmune disease patients. Multiple Sclerosis (MS) is a chronic and autoimmune neurological disease caused by lymphocytic infiltration. Its prevalence worldwide is 22.2 million cases of MS. There is a relation between TB and MS: due to immunomodulation or immunosuppression treatment of MS (reactivation of latent infection), or due to the intense inflammatory response before the infection of the bacillus (increased susceptibility to the development of autoimmune diseases). Screening for TB includes complete patient history, physical exam, chest radiography, and Tuberculin Skin Test or IGRA (Interferon Gamma Release Assay). This investigation is suggested when MS drugs (immunomodulatory and immunosuppressant medications) are prescribed. If a patient has positive results, the treatment for MS should not be delayed for the finishing TB treatment. In this paper, considering the high prevalence of tuberculosis, we recommend that TB screening should be also done at the moment of Multiple Sclerosis diagnosis.

Water footprint has been widely used to illustrate the consumption of water in many situations; for instance, in products, processes or regions of interest. In this work, we analyzed – using a sensitivity analysis approach – the effect of some variables in the calculation of the water footprint in the viticulture in Brazilian Serra Gaúcha (the major producing region of Brazilian Wine).The classical Penman-Monteith model for evapotransporation was considered, with uncertainties in some parameters (dead mulch covering fraction in the vineyard, maximum temperatures for some months, altitudes and latitudes of the site). The sensitivity analysis was conducted using the SAFE toolbox under Octave framework. The results indicated that the the portion of the water footprint corresponding to the evapotranspiration is more sensitive to the values of mulch covering fraction and the altitude of the site in comparison with the latitude and the maximum temperatures.

Carbonate reservoirs, influenced by depositional and diagenetic processes and characterized by features like faults and vugs that impact storage capacity, require more than traditional Borehole Imaging logs (BHI) for accurate porosity data. This data is essential for geological assessments, production forecasting, and reservoir simulations. This work aims to address this limitation by developing methods to measure and monitor the sustainability of carbonate reservoirs and exploring the application of sustainability principles to their management. The study integrates BHI and conventional logs from two wells to classify porosity-based facies within the Barra Velha Formation (BVF) in the Santos Basin. The methodology involves four steps: (i) analyzing conventional logs; (ii) segmenting BHI logs; (iii) integrating conventional and segmented BHI logs using Self-Organizing Maps (SOM); and (iv) interpreting the resulting classes. Matrix porosity values and non-matrix pore sizes categorize the porosity into four facies (A to D). Facies A has high non-matrix porosity with 14,560 small megapores, 5,419 large megapores, and 271 gigapores (71.9%, 26.76%, and 1.34% of the 20,250 pores, respectively). Facies B shows moderate non-matrix porosity with 8,669 small megapores, 2,642 large megapores, and 33 gigapores (76.42%, 23.29%, and 0.29% of the 11,344 pores, respectively) and medium matrix porosity. Facies C exhibits low non-matrix porosity with 7,749 small megapores, 2,132 large megapores, and 20 gigapores (78.27%, 21.53%, and 0.20% of the 9,901 pores, respectively) and medium matrix porosity. Facies D has low non-matrix porosity with 9,355 small megapores, 2,346 large megapores, and 19 gigapores (79.82%, 20.02%, and 0.16% of the 11,720 pores, respectively) and low matrix porosity. The novelty of this work lies in integrating data from two sources to classify porosity across the Pre-Salt reservoir interval, serving as a proxy for preliminary litho-facies identification without core data. This study advances our understanding of carbonate reservoir sustainability and heterogeneity, offering valuable insights for robust, sustainable reservoir characterization and management in the context of global environmental and geological changes.

The definition, origin and recreation of life remain elusive. As others have suggested, only once we put life into reductionist physical terms will we be able to solve those questions. To that end, this work proposes the phenomenon of life to be the product of two dissipative mechanisms. From them, one reinterprets extant biological life and deduces a testable scenario for its origin. The proposed theory of life allows its replication, reinterprets ecological evolution, creates new constraints on the search for life and lays the foundations for groundbreaking technologies.

This paper proposes an upper bound for mine productivity and also a simple truck dispatch rule that demonstrates how tight the upper bound can be using simulation. It also proposes a greedy search to approximate the productivity upper bound, which is faster and often exact. Uncertainty is added to the simulation in order to verify how the productivity responds to it. Typically, the productivity upper bound is less tight close to its saturation point as a function of the number of trucks, where adding more trucks only increases queues. Furthermore, more uncertainty in the model typically leads to a less tight upper bound. The results are conducted using real data from an open pit mine in Brazil.

This paper presents a case study on using Emacs and Org-mode for literate programming in undergraduate data science courses. Over three academic terms, the author mandated these tools across courses in R, Python, C++, SQL, and more. Onboarding relied on simplified Emacs tutorials and starter configurations. Students gained proficiency after initial practice. Live coding sessions demonstrated the flexible instruction enabled by literate notebooks. Assignments and projects required documentation alongside functional code. Student feedback showed enthusiasm for learning a versatile IDE, despite some frustration with the learning curve. Skilled students highlighted efficiency gains in a unified environment. However, uneven adoption of documentation practices pointed to a need for better incorporation into grading. Additionally, some students found Emacs unintuitive, desiring more accessible options. This highlights a need to match tools to skills levels, potentially starting novices with graphical IDEs before introducing Emacs. Key takeaways include literate programming aids comprehension but requires rigorous onboarding and reinforcement; Emacs excels for advanced workflows but has a steep initial curve. With proper support, these tools show promise for data science education.

Long coronavirus disease 2019 (COVID-19) may occur after experiencing acute COVID-19 infec-tion with many effects on patients´ kidneys. This study aimed to evaluate the clinical and labora-tory aspects of kidney function in individuals with long COVID in the Amazon region of Brazil. This cross-sectional study selected participants from a ‘long COVID’ clinical care program. Clini-cal data and baseline demographics were obtained, and blood samples were collected to quantify kidney-related markers. Patients were evaluated after COVID-19 infection at several time points as follows: 0–3 months, 3–6 months, 6–12 months, and 12 months. Altogether, 246 patients were selected for this study, and only 79 were hospitalised (9 in the intensive care unit because of COVID-19. Of the patients, 38 were diagnosed with hypertension after COVID-19, 52 cases had to have their medications adjusted, and 83 patients presented with kidney function decline. The older age group and individuals with glycaemic alterations presented with a higher risk of devel-oping kidney dysfunction. Therefore, health professionals should monitor long-term kidney mark-ers in long COVID.

Background: Due to the importance of brain death (BD) diagnostic do not mistake, reliable confirmatory exams should be performed to enhance its security. This study aims to evaluate the intracranial pressure (ICP) pulse morphology behavior in brain-dead patients through a noninvasive monitoring system. Methods: A pilot case-control study was conducted in adults that met the BD national protocol criteria. Quantitative data from the ICP waveforms were extracted and analyzed comparing BD patients and health subjects. Results: Fifteen patients were included. ICP waveforms presented substantial differences amidst BD patients when compared to the control group. Moreover, pulse amplitude and time to peak variables values in the case group were also statistically significant. Conclusions: In this exploratory study, noninvasive ICP waveforms have shown potential as a screening method in patients with suspected brain death. Future studies should be carried out in a larger population.

Bringing toghether mathematical and philosophical ideas related to transcendental numbers, this paper begins with a survey on transcendence and transcendental numbers, it then presents several properties of the transcendental numbers e and π, and then it gives the proof of a new inequality for transcendental numbers. Also, in relationship with these topics, we study solutions to the Yang-Baxter equation from hyperbolic functions and from logical implication.

Many neurodegenerative diseases are directly related to the formation of toxic protein aggregates, such as Parkinson’s and Alzheimer’s diseases, which are associated with the aggregation of alpha-synuclein (α-syn) and beta-amyloid (Aβ ), respectively. In this context, protein fibrils are the hallmark of these neurodegenerative diseases. In this sense, planning or designing compounds that are capable of preventing or reducing the formation of protein aggregation in the brain can be of fundamental importance for the curative treatment of these diseases. This work presents an in silico and experimental study to investigate the inhibitory potential of the ligands Octovespin (bioinspired by the wasp venom Polybia Occidentalis) and Fraternine-10 (bioinspired by the wasp venom Parachartergus fraternus wasp) against the aggregation of fibrils of the peptides Aβ(17-42) and α-syn, respectively. Using molecular docking and molecular dynamics simulations with 100 ns, the disaggregation capacity of these ligands was studied. The results obtained indicate that Octovespin and Fraternine-10 interact with the Aβ and α-syn protein fibrils throughout the simulation time. The RMSD values and the interactions with amino acids responsible for fibril aggregation demonstrate that both Octovespin and Fraternine-10 have a significant disaggregation potential, which corroborates the observations in vitro and in vivo. Furthermore, experimental results of Fraternine-10 demonstrate an anti-aggregation effect, indicating that it can promote the disaggregation of fibrils and prevent them from aggregating again to form oligomers. These discoveries qualify these molecules as potential candidates to become medicines against Parkinson’s and Alzheimer’s diseases.

The development of integrated, compact, and multifunctional photonic circuits is crucial to increase the capacity of all-optical signal processing for communications, data management or microsystems. Plasmonics brings compactness to numerous photonic functions, but its integration into circuits in not straightforward due to insertion losses and poor modes matching. The purpose of this article is to detail the integration strategies of plasmonic structures on dielectric waveguides, and to show through some examples the variety and the application prospect of integrated plasmonic functions.

In this tutorial review, we compare and contrast the chemical mechanisms of electrophile/oxidant sensing, and the molecular mechanisms of signal propagation. We critically analyze biological systems in which these different pathways are believed to be manifest and what the data really mean. Finally, we discuss applications of this knowledge to disease treatment and drug development.

For several years, drugs bearing reactive electrophilic appendages have been developed. These units typically confer prolonged residence time of the drugs on their protein targets, and may assist targeting shallow binding sites and/or improving drug-protein target spectrum. Studies on natural electrophilic molecules have indicated that in many instances natural electrophiles use similar mechanisms to alter signaling pathways. However, natural reactive species are also endowed with other important mechanisms to hone signaling properties that are uncommon in drug design. These include ability to be active at low occupancy and elevated inhibitor kinetics. Here we discuss how we have begun to harness these properties in inhibitor design.

In these days of information overload and high-throughput analysis, it is easy to lose focus on the study of individual proteins. It is our conjecture that such investigations are still crucially important and offer uniquely penetrative insights. We thus present a discussion of biophysical methods to allow readers to get to know their protein of interest better. Although this perspective is not written with the expert in mind, we hope that for interdisciplinary scientists, or researchers who do not routinely perform biophysical analyses, the content will be helpful and inspiring.

Here we draw insights from the latest serendipitous findings made on the opposing roles of a validated drug-target protein Keap1. We weigh up how natural reactive electrophiles and electrophilic small-molecule drugs in clinical use directly impinge on seemingly conflicting, yet both Keap1-electrophile-modification-dependent, cell-survival- vs. cell-death-promoting behaviors. In the process, we convey how understanding reactive chemical-signal regulation at a single-protein-specific level is an enabling necessity in deconstructing otherwise intricate reactive-small-molecule-responsive cellular pathways. We hope this opinion piece further spurs the broader interests of basic and pharmaceutical research communities toward better understanding of molecular mechanisms underpinning reactive small-molecule-regulated signaling subsystems.

The beer industry is a major producer of solid waste globally, primarily in the form of brewer’s spent grains (BSG), which due to its low value has historically been diverted to livestock as feed or to landfills as waste. Its high moisture content and chemical composition positions BSG as an ideal candidate for further processing with microbial fermentation, and recent research has focused on filamentous fungi and the ability of some species therein to degrade the predominant recalcitrant cellulolignin components of BSG to produce valuable compounds. Many species have been investigated to biovalorize this waste stream, including those in the genuses Aspergillus, Pennicillium, Rhyzopus, and Trichoderma, which have been used to produce a wide array of highly valuable enzymes and other functional compounds, and to increase the nutritional value of BSG as an animal feed. This review of recent developments in the application of filamentous fungi for the valorization of BSG will discuss the biochemical makeup of BSG, the biological mechanisms underlying fungi’s primacy to this application, and the current applications of fungi in this realm. As the majority of these studies are at lab-scale, the challenges to scale-up and more widespread application and will be discussed as well.

CoVID-19 is a multi-symptomatic disease which has made a global impact due to its ability to spread rapidly, and its relatively high mortality rate. Beyond the heroic efforts to develop vaccines, which we will not discuss, the response of scientists and clinicians to this complex problem has reflected the need to detect CoVID-19 rapidly, to diagnose patients likely to show adverse symptoms, and to treat severe and critical CoVID-19. Here we aim to encapsulate these varied and sometimes conflicting approaches and the resulting data in terms of chemistry and biology. In the process we highlight emerging concepts, and potential future applications that may arise out of this immense effort.

Cervical cancer is associated with persistent infections by high-risk HPV types that may have nucleotide polymorphisms and, consequently, different oncogenic potentials. Therefore, the objective of this study was to evaluate the genetic variability and structural effects of E7 oncogene of HPV58 in cervical scraping samples from Brazilian women. The study was carried out with patients from hospitals in metropolitan area of Recife, PE, Brazil. The most frequent HPV type was HPV16, 18 and 58, respectively. Phylogenetic analysis showed that the isolates were classified as sublineages A2, C1 and D2. Two positively selected mutations were found in E7: 63G and 64T. The mutations G41R, G63D and T64A in E7 protein were predicted to reduce the stability of the protein structure. Regarding the interaction of the E7 variant of HPV58 with the signaling of the NF-kB pathway, we observed that the variant HPV58/UFPE-54S decreased the activity of the pathway when compared to the prototype and the other variants behaved similarly to the prototype and the prototype increased the activity of the pathway when compared to pcDNA. In this study, it was possible to identify mutations that may interfere in the molecular interaction between the viral oncoproteins and host proteins.

The Covid‐19 pandemic, evolving needs of students & mentors, and the drive for global educational equality are collectively shifting how courses are packaged/distributed, ushering a more holistic approach and blending of fields. We recently created interdisciplinary courses in chemical biology aimed at massive open online and small private levels. These courses cover biology, chemistry, & physics, and concepts underlying modern chemical‐biology tools. We discuss what we learned while creating/overseeing these courses: content optimization and maintaining material freshness while fostering a stimulating learning environment. We outline mechanisms that help sustain student attention throughout rapidly‐moving courses, how to integrate adaptability to students’ needs in the short & long term, and speculate how we could have improved. We believe this will be an important guide for anyone wanting to develop online learning formats ideal for nurturing interdisciplinary scientists of tomorrow.

The efficacy of the product development process is measured by the ability to launch a project with product and production process specifications that could guarantee that the manufacturing can produce it with the least impact. If a problem is detected late, they bring consequences beyond the high cost of the solution, if related to physical ergonomics, which will influence the well-being of operators, productivity, and quality. Virtual Reality (VR) and Digital Human Modeling (DHM) are ones of the enabling technologies of Industry 4.0 and has already been applied on a large scale in industries such as automotive, construction, and aeronautics. However, even though the huge applications, these technologies are not yet applied by these industries for the analysis of physical ergonomics during product development phases. This study aims to characterize the state of the art and technology about the application of Virtual Reality and Digital Human Modeling for the physical ergonomics analysis in the during product development phases in the industry through a systematic review of the literature and patents. In patent documents recovery, we used Derwent Innovation database. The research is based on searching the selected terms in the title, summary, and claims of the documents through a search strategy containing IPC code and keywords. In articles recovery, we searched ScienceDirect, Springer, and IEEExplore databases for scientific publications. The search resulted in 311 patents documents and 16 articles in the scientific database. This study analyzed the patents to map out the technological progress in this area, where we found in the charts and data an increasing number of publications per year and a spread application with a considerable number of new technologies presented in these recent patents. The literature review indicated that Virtual Reality technology complements the Digital Human Modeling during physical ergonomics analysis for manufacturing process already designed. The majority of research on the use of VR and DHM technologies for physical ergonomics analysis focus on the automotive industry and the ergonomic assessment of workstations and current processes. Further research is needed to investigate how Virtual Reality and Digital Human Modeling might assist in the understanding of physical ergonomics in certain tasks throughout the product development process, such as the simulation of worker posture or effort when assembling parts.

COVID-19 had a significant impact on construction projects due to labor shortages and COVID-19 restrictions, yet little is known about the impact it had on construction safety. To address this gap, an Australian construction project was selected to study the impact of COVID-19 on safety performance, safety climate and safety leadership. The study collected data from safety climate surveys, leading and lagging safety indicators and used linear regression to compare safety performance pre and post the onset of COVID-19. Our results showed after the onset of COVID-19 there was a significant reduction (Pr>F at 0.05%) in incident rate, an improvement in supervisor safety leadership and safety climate, and satisfaction with organisational communication. The study identified the increase level of safety awareness due to COVID-19 did not result in an increase in the level of engagement in safety leadership. Interestingly, participation in the safety leadership activities did not improve until a change of Project Manager occurred. The study determined leaders who establish a positive safety climate within a project could negate the safety performance impact of COVID-19. The study confirms the importance of site safety leadership in maintaining engagement in risk management and the value of focused safety communication.

Mass customization, small batch sizes, high variability of product types and a changing product portfolio during the life cycle of an industrial plant are current trends in the industry. Due to an increasing decoupling of the development of software and hardware components in an industrial context, compatibility problems within industrial control systems arise more and more frequently. In this publication, a strategy concept for compatibility testing is derived and discussed by means of literature review and applied research. This 4-phased strategy concept identifies incompatibilities between software and hardware components in the industrial control environment and enables test engineers to detect problems at an early stage. By automating the compatibility test on an external I-PC, the test can be run both when new software is installed on the industrial controller and when the controller is restarted. Thus, changes to the components are constantly detected and incompatibilities are avoided. Furthermore, early incompatibility detection can ensure that a system remains permanently operational. Based on a discussion, additionally strategies are identified to consolidate the robustness and applicability of the presented concept.

Here we will electrically-quantum model the neutron and proton as a three-phase alternating current electric generator, for this, we will use the theory of three-phase electric generators and vector or phasor diagrams. We will use this model to hypothesize how the quarks that form neutrons and protons with a combined mass of 10 MeV/c², can generate, through quarks-antiquarks-gluon interactions, a mass of 939.56 MeV/c² for the neutron and a mass of 938.27 MeV/c² for the proton. Using quantum mechanics and the theory of the generalization of the Boltzmann constant in curved space-time we will calculate the number of quarks-antiquarks-gluons and gravitons inside a neutron. We will also analyse βˉ decay using vector diagrams, we will calculate the tension of the string T₀ and the length of the string ℓs between quarks-antiquark and finally, we will model a black hole using a neutron equivalent model. In version 2 of this article, we will update the vector diagrams of the βˉ decay and theoretically calculate the energy of the W⁻ boson, the Z⁰ boson, and the Θ angle, Θ = arc cos (W⁻/Z⁰). We will demonstrate, through vector diagrams, that quarks-antiquarks-gluon interactions are the cause of the origin of the W⁻ boson and the Z⁰ boson. We will also demonstrate how the fine structure constant α originates. It is important to make clear, in future updates, we will describe the relationship that exists between the theory described in this paper and the Isospin theory, flavour and colour theory

Nowadays the dynamism induced by the constant change of strategic decisions on the markets produces an extra difficulty in the management of an organization. The strategic decisions made by managers can become obsolete in a short period of time. One of the major difficulties in managing a commercial organization is to predict, with some precision degree, the impact some strategic decisions have on the financial results. Business Intelligence (BI) is an area widely used to help managers to make strategic decisions. But the methods used, behind the scenes, to achieve the conclusions are kept secret by BI company-based services. Modelling the environment can be a good option to study the impact of an action, provided by a strategic decision, in a real environment. A good model should give an approximate result of an action applied to a previous state of the environment. Artificial Neural Networks (ANNs) are proven to be excellent in modeling environments with some level of data noise. The same strategic action can have different results in different organizations. A tool that allows an evaluation of a strategic action applied to an environment should have a major importance in the management scope. Modeling the environment should save time and money for the organization to improve the performance of the strategic plan. If one evaluates the state of the environment after a strategic action being applied, it can be possible to mitigate the risk of failure of the strategic plan. As we will be able to verify, it is possible to use ANNs to model strategic environments that should allow the prediction of sales and operating results by the used strategies with some precision, although the level of success will be directly related with the user’s necessity.

Several studies have already demonstrated the relationship between the loss of natural habitats and the incidence of diseases caused by vectors, such as dengue, which is an acute fever disease, considered a serious public health problem. The aim of the present study was to analyze the relationship between land use changes between 2009 and 2019 and the occurrence of dengue fever in 2015 and 2019 by municipality, using the state of Minas Gerais as a case study. For this, secondary data obtained from openly available sources were used. Natural vegetation cover data were obtained from the MAPBiomas platform and dengue occurrence data from the Ministry of Health, in addition to socioeconomic indicators from the Brazilian Institute for Geography and Statistics. Between 2015 and 2019, 1,255,731 cases of dengue were recorded throughout the state of Minas Gerais, ranging from 0 to 227 per thousand inhabitants between municipalities. The occurrence of dengue was distributed throughout all regions of Minas Gerais, affected by climatic and socioeconomic aspects. In general, municipalities with net loss of natural vegetation, predominantly located in the Cerrado biome, had the highest number of dengue cases in the studied period. Despite the significant positive relationship between these two variables, three of the eight socioeconomic parameters analyzed also affected the occurrence of dengue: population density, human development index (both positively) and Gini inequality index (negatively). These results indicate that, contrary to expectations, municipalities with better social conditions had more dengue cases. Our study indicates that natural vegetation is, directly or indirectly, involved in the ecosystem service of dengue control, despite the occurrence of this disease being affected by multiple factors that interact in a complex way. Thus, policies towards reducing deforestation must be complemented by a continuous investment in public health policies and reduction of social inequalities to efficiently control dengue fever.

Here we mathematically model black holes following dynamics similar to RC electrical model, focusing on their similarities at the singularity. We use this mathematically modelling to hypothesize the origin and growth of a black Hole. Or model consists of several steps defined by: (1) the formation of a black hole following general relativity equations; (2) growth of the black hole modelled as a resistance-capacitance-like electrical circuit. Based on the mathematical modeling of a black hole following dynamics similar to an RC circuit, for a circular motion with constant acceleration, in which the condition is fulfilled, Vt = ω r, we are going to calculate the amount of dark matter in the Milky Way galaxies and the Andromeda galaxy and subsequently the rotation curve of both galaxies to compare them with observed or measured values.

This paper proposes a method based on genetic algorithm (GA) for the security-constrained optimal dispatch of integrated natural gas and electricity networks, considering operating scenarios in both energy systems. The mathematical formulation of the optimization problem consists of a multi-objective function which aims to minimize both cost of thermal generation (diesel and natural gas) as well as the production and transportation of natural gas. The joint gas-electricity system is modeled by two separate groups of nonlinear equation, which are solved by the combination of Newton's method with the GA. The applicability of the proposed method is tested in the Belgian gas network integrated with the IEEE 14-bus test system and a 15-node natural gas network integrated with the IEEE 118-bus test system. The results demonstrate that the proposed method provides efficient and secure solutions for different operating scenarios in both energy systems.

Objectives: The impact of COVID-19 in metropolitan areas has been extensively studied. The geographic spread to smaller cities is of great concern and may follow hierarchical influence of urban centers. With that in mind, we investigated factors that affect vulnerability of inner municipalities in São Paulo State, Brazil, an area with 24 million inhabitants. Methods: Surveillance data for confirmed COVID-19 cases and admissions for severe acute respiratory disease (SARD) up to April 18^th were recorded for each of 604 municipalities that lay outside São Paulo metropolitan area. Vulnerability was assessed in Multivariable models, including sociodemographic indexes, road distance to the State Capital and the municipalities classification proposed by the Brazilian Institute of Geography and Statistics. Municipalities of great regional relevance were used as reference category for that classification. The outcome of interest for Cox regression was having COVID-cases, with time counting from the first report in São Paulo State. For binomial negative regression models, the outcomes of interest were rates of confirmed COVID-19 cases and admissions for SARD.Results: A total of 198 (32.8%) municipalities had autochthonous COVID-19 cases. In Cox models, affected municipalities were likely to have greater population density (Hazard Ratio[HR] for each 100 inhabitants per square kilometer, 1.07; 95% Confidence Interval [CI], (1.05-1.10)), proportion of inhabitants in urban area (HR, 1.02; 95%CI, 1.00-1.04), higher human development index (HDI, HR for 1%, 1.06; 95%CI, 1.00-1.13) and Gini Index for Inequality of income (HR for 1%, 1.04, 95% CI, 1.00-1.07). On the other hand, distance from the Capital was protective (HR for each 100Km, 0.82; 95%CI, 0.74-0.90). The HR95%[95%CI] also varied negatively according to the categories of influence of major centers (0.41 [0.22-0.77], 0.16 [0.09-0.32], 0.07 [0.03-0.15]). The binomial negative regression models for COVID-19 incidence also detected positive association with population density (Incidence Rate Ratio[IRR], 1.13; 95%CI, 1.07-1.18) and proportion of urban population (IRR, 1.04; 95%CI, 1.01-1.05), protection for cities distant to the Capital (IRR=0.73; 95%CI, 0.68-0.81) and increasing negative association for categories of influence (0.19 [0.09-0.42], 0.07 [0.03-0.15] and 0.03 [0.02-0.08]). Similar findings were detected when we used SARD incidence as outcome.Conclusion: Municipalities with greater population, density and regional influence were more likely to be affected earlier and more intensely by COVID-19. Non-pharmacological measures should be strengthened in those areas of greater risk.

The use of electronic means to support tasks such as pastoralism is a way of intelligently optimizing that activity. As any autonomous system, it requires human intervention in case of failure, and therefore it needs an autonomous mechanism that draws the attention of the human operator whenever the system or the animals evolve to undesired conditions. The present work progresses an existing alarm system, used in the SheepIT gateway, which can monitor the behavior of animals and equipment, warning human supervisors of the occurrence of unwanted events and the need for intervention. Concretely, given the lack of coverage of Internet access in rural areas, the system was integrated with a satellite interface to guarantee communication and the timely delivery of alarm messages. The paper compares the overall networking performance of the satellite link, against a Wi-Fi laboratorial baseline.

The uptake of buildings employing cross-laminated timber (CLT) assemblies and designed to Passivhaus standard has accelerated internationally over the past two decades due to several factors including design responses to the climate crisis by decarbonising the building stock. Structural CLT technology and the voluntary Passivhaus certification both show measurable benefits in reducing energy consumption, while contributing to durability and indoor comfort. However, there is a general lack of evidence to support a fast uptake of these technologies in Australia. This paper responds to the compelling need of providing quantitative data and adoption strategies, it explores their combined application as a potential pathway for climate-appropriate design of energy-efficient and durable mass timber envelope solutions for subtropical and tropical Australian climates. Hygrothermal risk assessments of interstitial condensation and mould growth of CLT wall assemblies inform best-practice design of mass timber buildings in hot and humid climates. This research found that the durability of mass timber buildings located in hot and humid climates may benefit from implementing the Passivhaus standard to manage interior conditions. The findings also suggested that climate-specific design of the wall assembly is critical for mass timber buildings, in conjunction with excellent stormwater management practices during construction and corrosion protection for metallic fasteners.

IHepatitis C virus (HCV) has a high genetic diversity, with seven genotypes with 86 subtypes. This genetic variability confers persistence in the infection and escape of the immune system with evolution to cirrhosis and cancer. Environmental factors can contribute to different disease progression, being essential to assess the viral genotype in the infection and discuss the environmental particularities of Eastern Amazon, and the frequencies of Liver fibrosis between different HCV genotypes in patients living in a region of the Brazilian Eastern Brazilian Amazon. Consists in an observational cross-sectional study. Sociodemographic and clinical data of 76 individuals diagnosed with Hepatitis C between 2019 and 2020 in public health services were selected. Data collected was tabulated in Microsoft Excel 2010TM spreadsheets and analysed in GraphPad Prism 5.0TM. Liver fibrosis was associated with genetic subtypes. Subtype 1b was predominant (42.1%), followed by 1a (13%) and 3a (1.3%). 69.7% of participants had chronic hepatitis, with mild fibrosis (F1/F2) being the most prevalent (38.1%). Severe fibrosis was detected in 75% of individuals infected with the subtype 1b, that is associated with more severe disease. We suggest further studies, to assess other communities in the region, as well as the monitoring of these patients with Liver Elastography to determine the disease evolution and its better management.

This paper investigates experiences of how local cultural norms and social capital influenced the disaster relief process following the 2011 GEJET disaster. To underline social capital’s multiple‐influence aspects, this paper draws from field research that focuses on collective and individual social capital in disaster relief to systematise the findings according to the social capital framework. The paper uncovers new effects of individual social capital and collective capital in a mega-disaster context, thus contributing to pushing the research agenda toward a more critical appraisal of individual social capital and collective capital. We contribute to the nascent but growing literature that clarifies the relationship between social capital and disaster resilience. A qualitative study was conducted to capture the essence of their shared experiences. Findings revealed three main themes capturing the essence of the research participants’ disaster experiences. First, disaster response relied mostly on locally driven relief due to a clear understanding of the local culture. Second, there was an urgency to establish a sense of normalcy by providing quality supplies that would help survivors. Third, Japanese gender roles and expectations were reflected in the disaster relief process. The themes establish a wide array of lived experiences that are important to reflect on the role social capital plays in the policy-making and needs assessment processes in post-disaster relief and response efforts. The findings provide insights for integrating social dimensions into a humanitarian aid culture as citizens work towards a sense of normalcy.

The required processes and steps for making bread include technological and innovative concepts. The current trend is the use of less toxic compounds and green processes. Besides lactic acid bacteria and yeast, other microorganisms with special properties, such as enzymes, new aroma and flavor, exopolysaccharides, and vitamins, among other compounds with beneficial properties, could be added to bread manufacture, improving bread quality and health effects for the consumers. Freeze drying, new encapsulation methods, cryoprotectants, spray drying, fluidized bed drying, and vacuum drying are used for probiotics and microorganism cultures that will be used as starters or biological additives in the fermentation. The same development is observed in the preservation methods, and studies with plant extracts and essential oils have been proposed and introduced, replacing chemical agents, such as propionate, within the clean-label bread formulations concept. Baking science is a growing research line incorporating innovative methods and biological additives.

Barry Turner’s 1978 Man-made Disasters and Charles Perrow’s 1984 Normal Accidents were seminal books but a detailed comparison has yet to be undertaken. Doing so is important to establish content and priority of key ideas underpinning contemporary safety science. Turner’s research found socio-technical and systemic patterns that meant that major organisational disasters could be foreseen and were preventable. Perrow’s macro-structuralist industry focus was on technologically deterministic but unpredictable and unpreventable ‘system’ accidents, particularly rare catastrophes. Andrew Hopkins and Nick Pidgeon respectively suggested that some prominent writers who wrote after Turner may not have been aware of, or didn’t properly acknowledge, Turner’s work. Normal Accidents didn’t cite Turner in 1984 or 1999. Using a methodology involving systematic reading and historical, biographical and thematic theory analysis, a detailed review of Turner’s and Perrow’s backgrounds and publications sheds new light on Turner’s priority and accomplishment, highlighting substantial similarities as well as clear differences. In a previously unpublished letter, Perrow confirmed reading Man-made Disasters while writing Normal Accidents. Turner became better known after a 1997 second edition but under-acknowledgment issues continued. Ethical citation and potential reasons for under-acknowledgment are discussed. It is concluded that Turner’s foundational importance for safety science should be better recognised.

We survey SoTA open-domain conversational AI models with the purpose of presenting the prevailing challenges that still exist to spur future research. In addition, we provide statistics on the gender of conversational AI in order to guide the ethics discussion surrounding the issue. Open-domain conversational AI are known to have several challenges, including bland responses and performance degradation when prompted with figurative language, among others. First, we provide some background by discussing some topics of interest in conversational AI. We then discuss the method applied to the two investigations carried out that make up this study. The first investigation involves a search for recent SoTA open-domain conversational AI models while the second involves the search for 100 conversational AI to assess their gender. Results of the survey show that progress has been made with recent SoTA conversational AI, but there are still persistent challenges that need to be solved, and the female gender is more common than the male for conversational AI. One main take-away is that hybrid models of conversational AI offer more advantages than any single architecture. The key contributions of this survey are 1) the identification of prevailing challenges in SoTA open-domain conversational AI, 2) the unusual discussion about open-domain conversational AI for low-resource languages, and 3) the discussion about the ethics surrounding the gender of conversational AI.

Of the manifold concepts in drug discovery and design, covalent drugs have re-emerged as one of the most promising over the past 20-or so years. All such drugs harness the ability of a covalent bond to drive an interaction between a target biomolecule, typically a protein, and a small molecule. Formation of a covalent bond necessarily prolongs target engagement, opening avenues to targeting shallower binding sites, protein complexes, and other difficult to drug manifolds, amongst other virtues. This opinion piece discusses frameworks around which to develop covalent drugs. Our argument, based on results from our research program on natural electrophile signaling, is that targeting specific residues innately involved in native signaling programs are ideally poised to be targeted by covalent drugs. We outline ways to identify electrophile-sensing residues, and discuss how studying ramifications of innate signaling by endogenous molecules can provide a means to predict drug mechanism and function and assess on- versus off-target behaviors.

Consumer demands for new sensory experiences have driven the research of unconventional yeasts in beer. While much research exists on the use of various common Saccharomyces cerevisiae strains as well as non-Saccharomyces yeasts, there exists a gap in knowledge regarding other non-cerevisiae Saccharomyces species in the fermentation of beer, outside that of S. pastorianus. Here, five distinct species of Saccharomyces from the UC Davis Phaff Yeast Culture Collection, as well as one interspecies hybrid from Fermentis, were chosen to ferment 40 L pilot scale beers. S. kudriavzevii, S. mikatae, S. paradoxus, S. bayanus, and S. uvarum yeasts were fermented in duplicate, with one fermenter in each pair receiving 10 g/L dry-hop during fermentation. Analytical measurements were made each day of fermentation and compared to controls of SafAle US-05 and SafLager W 34/70 for commercial brewing parameters of interest. Finished beers were also analyzed for aroma, taste, and mouthfeel to determine the flavor of each yeast as it pertains to brewing potential. All beers exhibited spicy characteristics, likely from the presence of phenols; dry-hopping increased fruit notes while also increasing perceived bitterness and astringency. All of the species in this study displayed great brewing potential, and might be an ideal addition to beer depending on a brewery’s desire to experiment with flavor and willingness to bring a new yeast into their production environment

Here, using the theory of electrical-quantum modelling of the neutron and proton as a three-phase alternating current electrical generator, we will analyse the proton decay and the inverse neutron decay and determine the following subatomic particles, Dproton, Protoniu, Dneutron and Neutroniumd.

As modern systems are becoming more complex their control strategy cannot longer relay only on measurement information that usually comes from probes but also from mathematical models. Those systems models can lead to unbearable computation times due to their own complexity, turning the control process non-viable, which leads to the implementation of surrogate models that enable to achieve estimates within acceptable time to take decisions. A control trained with Deep Reinforcement Learning algorithm, using a Physics-Informed Neural Network to obtain the temperature map on the following time step, replaces the need of running Direct Numerical Simulations. On this work we considered an 1D heat conduction problem, which temperature distribution feeds a control system to activate a heat source aiming to obtain a constant, previously defined, temperature value. With this approach, control training becomes much faster without the need of performing numerical simulations or laboratory measurements, as well the control is taken based on Neural Network enabling its implementation on simple processors to edge computing.

Cross-cultural mobility is a phenomenon that is increasingly growing, and the resulting stress has become a severe health issue. Thus, we conducted a systematic review of articles reporting research on stress measures of cross-cultural mobility or acculturative stress, emphasizing its internal structure. We adopted the PRISMA procedures for scoping reviews (e.g., searching articles in databases), resulting in the inclusion 20 articles in the final analysis that present evidence of validity based on the internal structure of 16 measures. The most common factors identified were related to cultural stressors, language stressors, and discrimination stressors. After analyzing a cross-cultural mobility stress concept implicit in the definitions used in the articles, we found that most measures of acculturative stress did not evaluate it according to the Stress and Coping Model of Lazarus and Folkman. Most measures only focused on part of the phenomena (some estimated the stressors, others the coping strategies). Few took into account the physiological and psychological responses to internal or external stressors, and even fewer considered its positive aspects (eustress). Consequently, it is pivotal to develop measures that take into account the multiple dimensions of the cross-cultural mobility stress. Other results (e.g., validity evidence of the measures) and limitations of this systematic scoping review are presented and discussed.

This work aimed to assess and characterize the air quality in what concerns particulate pollution in urban-industrial environments. The main objectives were to study the spatial variability of the deposition flux of particulate pollution identifying areas with higher deposition, associate the variability with climatological variables and with possible surrounding emitting sources. The method for collecting the deposited particles was based on the standard NF X 43-007. Sampling for particulate pollution took place between April 2015 and February 2016, through seven sampling campaigns. Maps of the spatial dispersion for the particulate pollution were obtained through statistics and geostatistics techniques. Elemental identification by scanning electron microscopy (SEM) was also used but only in two sampling campaigns. The results show that the sampling campaigns that took place during hot and dry periods, 2nd and 3rd, present higher deposition flux: 2.04 g/(m2 x month) and 1.72 g/(m2 x month), respectively. Lower deposition fluxes were registered in the 6th and 7th campaigns: 0.23 g/(m2 x month) and 0.24 g/(m2 x month), respectively. It was also observed a recurrent high deposition at specific sampling points which may be due to both the nearby road traffic and the presence of chimneys. SEM analysis allowed to associate repetitive element deposition, at the same sampling point, to the same emitting source.

Across the global construction industry, fatalities continue to occur from high-risk activities where the risk controls have been defined, however were unreliable. In the mining industry, Critical Control Risk Management has provided positive results in reducing major accidents, which raises the question, could the Critical Control approach reduce the fatality rate in the construction industry? This study analysed 10 years of serious and fatal incident investigation reports from four international construction companies to i) assess the reliability of their Critical Controls (CCs) and ii) assess the factors which affect the reliability of CCs. The results show the reliability of CCs, measured by implementation and effectiveness, averaged just 42%. Human performance factors including risk identification, decision-making and competency together with supervision, job planning, communication organisational factors were identified as affecting the reliability of CCs. The study used bow-tie diagrams with real event data to find the actual CC effectiveness. This gave actionable findings directly related to individual CCs enabling the participating organization to focus resources on improving specific verification processes. The results confirm the applicability of CCs for the Major Accident Event hazards analyzed and highlights further review is required of the factors which need to be considered when implementing a CC program. This paper details our methodology and results, to assist others apply CCs as a risk management tool.

The theory of one-photon ionization and two-photon above-threshold ionization is formulated for applications to heavy atoms in attosecond science using the Dirac-Fock formalism. A direct comparison of the Wigner-Smith-Eisenbud delays for photoionization is made with delays from the Reconstruction of Attosecond Beating By Interference of Two-photon Transitions (RABBIT) method. Photoionization by an attosecond pulse train, consisting of monochromatic fields in the extreme ultraviolet range, is computed with many-body effects at the level of the Relativistic Random Phase Approximation (RRPA). Subsequent absorption and emission processes of infrared laser photons in RABBIT are evaluated using static ionic potentials as well as asymptotic properties of relativistic Coulomb functions. As expected, light elements, such as Argon, show negligible relativistic effects, while heavier elements, such a Krypton and Xenon, exhibit delays that depend on the fine-structure of the ionic target. The relativistic effects are notable close to ionization thresholds and Cooper minima with differences in fine-structure delays predicted to be as large as tens of attoseconds. The separability of relativistic RABBIT delays into a Wigner-Smith-Eisenbud delay and a universal continuum--continuum delay is studied with reasonable separability found for photoelectrons emitted along the laser polarization axis in agreement with prior non-relativistic results.

In recent years, extensive research has delved into the pathophysiology of local reactions triggered by Bothrops snake venoms. Even though antivenom works well at reducing death and systemic effects, it is still not very effective in treating local reactions because the venom works so quickly, and antivenom cannot fix injuries that have already been triggered. This might be attributed to certain molecules amplifying the venom-induced innate response. While evidence suggests endogenous mediators at the venom site play a role in this envenomation, in Brazil, concurrent use of anti-inflammatories or other drugs associated with the antivenom remains uncommon. The aim of this study was to determine how various inflammatory mediators affected the leukocyte-endothelium interaction (LEI) following a B. jararaca bite. According to our findings, nitric oxide and cyclooxygenase pathway eicosanoids significantly contribute to alteration of LEI induced by B. jararaca venom. Conversely, lipoxygenase-mediated eicosanoids, histamine, or serotonin had minimal participation. Markedly, treatment with dexamethasone alongside antivenom mitigated alterations of LEI induced by the B. jararaca snake venom. The limited efficacy of the antivenom in managing Bothrops venom-induced local reactions emphasizes the critical need for supplementary treatments to enhance therapeutic outcomes.

The adoption of health information technology (HIT) has increased considerably, contributing to better communication between physicians and patients and providing technological bases for learning and institutional improvement. This type of technology brings many challenges; therefore, understanding its adoption and assimilation is important to assess its potential for engendering desirable outcomes in health management. The assimilation of health information systems should be highlighted as their importance in health organisations is now recognised as a key facilitator assisting in providing better health outcomes. Thus, this study aimed to analyse HIT adoption based on models such as Technology, Organisation and Environment (TOE), which analyses at the organisational level, with other models, such as the Technology Acceptance Model (TAM), which analyses at the individual level, and the assimilation of the adopted technologies.

Significance: Electrophile signaling is coming into focus as a bona fide cell signaling mechanism. The electrophilic regulation occurs typically through a sensing event (i.e., labeling of a protein) and a signaling event (the labeling event having an effect of the proteins activity, association, etc.). Recent advances: Herein, we focus on the first step of this process, electrophile sensing. Electrophile sensing is typically a deceptively simple reaction between the thiol of a protein-cysteine, of which there are around 200,000 in the human proteome, and a Michael acceptor, of which there are numerous flavors, including enals and enones. Recent data overall paint a picture that despite being a simple chemical reaction, electrophile sensing is a discerning process, showing labeling preferences that are often not in line with reactivity of the electrophile. Critical issues: With a view to trying to decide what brings about highly electrophile-reactive protein-cysteines, and how reactive these sensors may be, we discuss aspects of the thermodynamics and kinetics of covalent/non-covalent binding. Data made available by several laboratories indicate that it is likely that specific proteins exhibit highly stereo- and chemoselective electrophile sensing, which we take as good evidence for recognition between the electrophile and the protein prior to forming a covalent bond. Future directions: We propose experiments that could help us gain a better and more quantitative understanding of the mechanisms through which sensing comes about. We further extoll the importance of performing more detailed experiments on labeling and trying to standardize the way we assess protein-specific electrophile sensing.We propose experiments that could help us gain a better and more quantitative understanding of the mechanisms through which sensing comes about. We further extoll the importance of performing more detailed experiments on labeling and trying to standardize the way we assess protein-specific electrophile sensing.

Performance of the overhead squat may affect golf swing mechanics associated with golf-related low back pain. This study investigates the difference in lumbar kinematics and joint loads during the golf downswing between golfers with different overhead squat abilities. Based on the per-formance of the overhead squat test, 21 golfers aged 18 to 30 years were divided into the highest-scoring group (HS, N=10, 1.61 ± 0.05 cm, and 68.06 ± 13.67 kg) and lowest-scoring group (LS, N=11, 1.68 ± 0.10 cm, and 75.00 ± 14.37 kg). Data collection used a motion analysis system, two force plates, and TrackMan. OpenSim software was used to simulate the joint loads for each lum-bar joint. An independent t-test was used for statistical analysis. Compared to golfers demonstrat-ing limitations in the overhead squat test, golfers with better performance in the overhead squat test demonstrated significantly greater angular extension displacement on the sagittal plane, smaller lumbar extension angular velocity, and smaller L4-S1 joint shear force. Consequently, the overhead squat test is found to be a useful index to reflect lumbar kinematics and joint loading patterns during the downswing, and provides a good training guide reference for reducing the risk of a golf-related low back injury

This paper presents a study on the influence of the frequency variation of a nonlinear1 control allocation technique execution, developed by the author [1], named by Fast Control2 Allocation (FCA) for the Quadrotor Tilt-Rotor (QTR) aircraft. Then, through Software In The3 Loop (SITL) simulation, the proposed work considers the use of Gazebo, QGroundControl, and4 Matlab applications, where different frequencies of the FCA can be implemented separated in5 Matlab, always analyzing the QTR stability conditions from the virtual environment performed in6 Gazebo. TheresultsshowedthattheFCAneedsatleast200HzoffrequencyfortheQTRsafeflight7 conditions, i. e., 2 times smaller than the main control loop frequency, 400 Hz. Lower frequencies8 than this one would case instability or crashes during the QTR Operation.

Since it was proposed, the Robot Operating System (ROS) has fostered solutions for various problems in robotics in the form of ROS packages. One of these problems is Simultaneous Localization and Mapping (SLAM), a problem solved by computing the robot pose and a map of its environment of operation at the same time. The increasingly availability of robot kits ready to be programmed and also of RGB-D sensors often pose the question of which SLAM package should be used given the application requirements. When the SLAM subsystem must deliver estimates for robot navigation, as is the case of applications involving autonomous navigation, this question is even more relevant. This work introduces an experimental analysis of GMapping and RTAB-Map, two ROS compatible SLAM packages, regarding their SLAM accuracy, quality of produced maps and use of produced maps in navigation tasks. Our analysis aims ground robots equipped with RGB-D sensors for indoor environments and is supported by experiments conducted on datasets from simulation, benchmarks and from our own robot.

Our bodies produce a host of electrophilic species that can label specific endogenous proteins in cells. The signaling roles of these molecules are underactive debate. However, in our opinion it is becoming increasingly likely that electrophiles can rewire cellular signaling processes at endogenous levels. Attention is turning more to understanding how nuanced electrophile signaling in cells is. In this perspective, we describe recent work from our laboratory that has started to inform on different levels of context-specific regulation of proteins by electrophiles. We discuss the relevance of these data to the field, and to the broader application of electrophile signaling to precision medicine development, beyond the traditional views of their pleiotropic cytotoxic roles.

This study assesses the applicability of different-resolution multispectral remote sensing images for mapping and estimating the aboveground biomass (AGB) of Carpobrotus edulis, a prominent invasive species in European coastal areas. The performance of three sets of multispectral images with different resolutions was compared: (i) 2.5 cm Ground Sample Distance (GSD), 5 cm GSD and 10 cm GSD images. The images were classified using the supervised classification algorithm Random Forest and later improved applying a sieve filter. The results show that the three tested image resolutions allow constructing reliable coverage maps of C. edulis, with Overall Accuracy values of 89%, 85% and 88% for the classification of the 2.5 cm, 5 cm and 10 cm GSD images, respectively. Samples were also collected, dried and weighed to estimate AGB using the relationship between the Dry Weight and Vegetation Indices (VI). The regressions were evaluated based on their R² and Normalised RMSE. The best-performing VI-DW regression models achieved: R² = 0.87 and NRMSE = 0.09 for the 2.5 cm resolution; R² = 0.77 and NRMSE = 0.12 for the 5 cm resolution; and, R² = 0.64 and NRMSE = 0.15 for the 10 cm resolution. C. edulis area and total AGB were: 3441.10 m² and 28,327.1 kg (with a Relative Error (RE) = 0.08), for the 2.5 cm resolution; 3070.04 m² and 29,170.8 kg (RE = 0.08), for the 5 cm resolution; and, 2305.06 m² and 22,135.7 kg (RE = 0.11), for the 10 cm resolution. Differences were analysed in detail, spatially, to determine their causes. Final analyses suggest that, for C. edulis, multispectral imagery of up to 5 cm GSD is adequate for the estimation of the species’ distribution and biomass.

In this paper, we present the idea of Self Supervised learning on the Shape Completion and Classification of point clouds. Most 3D shape completion pipelines utilize autoencoders to extract features from point clouds used in downstream tasks such as Classification, Segmentation, Detection, and other related applications. Our idea is to add Contrastive Learning into Auto-Encoders to learn both global and local feature representations of point clouds. We use a combination of Triplet Loss and Chamfer distance to learn global and local feature representations. To evaluate the performance of embeddings for Classification, we utilize the PointNet classifier. We also extend the number of classes to evaluate our model from 4 to 10 to show the generalization ability of learned features. Based on our results, embedding generated from the Contrastive autoencoder enhances Shape Completion and Classification performance from 84.2% to 84.9% of point clouds achieving the state-of-the-art results with 10 classes.

Shafts with a stepped shoulder are particularly well known in the field of drive technology. In combination with a form-fit shaft–hub connection, the shaft shoulder fixes the hub on the shaft as well as the absorption of the axial forces. With profiled shafts, there is a notch overlay in the shaft shoulder, involving the shaft shoulder and profile. If the hub is also connected with the profiled shaft, the hub edge acts as an additional notch in the shaft shoulder area. The multiple resulting notches have not previously been part of research activities in the field of innovative trochoidal profile connections. Compared to conventional positive-locking connections, such as the keyway connection or the involute splined shaft profile, the favourable features of trochoidal profiles have only been based on connections with smooth shafts without a shoulder in previous studies. Accordingly, this article addresses the numerical and experimental investigations of trochoidal profile connections with offset shafts for pure torsional loading. Focusing on a hybrid trochoid with four eccentricities and six drivers, a well-founded numerical and experimental investigation was carried out with numerous fatigue tests. In addition, the influence of a shaft shoulder was also demonstrated on simple epi- and hypotrochoidal profiles.

Keap1 is associated with cytoprotective signaling. These roles of Keap1 typically focus on its role as a degrader of the antioxidant response (AR) transcription factor, Nrf2, and the inhibition of this process upon Keap1 labeling by electrophiles. However, work from several laboratories has reemphasized both the important role of Nrf2 binding in negatively regulating AR, and the fact that electrophile Keap1 modification dissociates Nrf2 from Keap1. This model appears to be applicable to other signaling modes regulated by Keap1. Here we use recent data we have derived using experiments in zebrafish and cultured cells to discuss different models of Keap1 regulation.

Table detection is a preliminary step in extracting reliable information from tables in scanned document images. We present CasTabDetectoRS, a novel end-to-end trainable table detection framework that operates on Cascade Mask R-CNN, including Recursive Feature Pyramid network and Switchable Atrous Convolution in the existing backbone architecture. By utilizing a comparatively lightweight backbone of ResNet-50, this paper demonstrates that superior results are attainable without relying on pre and post-processing methods, heavier backbone networks (ResNet-101, ResNeXt-152), and memory-intensive deformable convolutions. We evaluate the proposed approach on five different publicly available table detection datasets. Our CasTabDetectoRS outperforms the previous state-of-the-art results on four datasets (ICDAR-19, TableBank, UNLV, and Marmot) and accomplishes comparable results on ICDAR-17 POD. Upon comparing with previous state-of-the-art results, we obtain a significant relative error reduction of 56.36%, 20%, 4.5%, and 3.5% on the datasets of ICDAR-19, TableBank, UNLV, and Marmot, respectively. Furthermore, this paper sets a new benchmark by performing exhaustive cross-datasets evaluations to exhibit the generalization capabilities of the proposed method.

Although the influence of climate on the fire regime is unanimously recognized, most publications are studies on this influence are at the global scale. Therefore, this study aims to demonstrate the role of climate in the incidence of wildfires at the country and regional scale using statistical analysis and machine learning methods. Mainland Portugal was chosen as a case study due to its climate and because it is the European region most affected by wildfires. Results demonstrate the climate signature in the spatial and temporal distribution of the wildfire incidence. The conclusions of the study include (i) the existence of two pyro-regions, with different types of climate (Csb and Csa) composed of NUTS II regions: the northern region composed of the Norte and Centro regions and the southern region composed of Alentejo and Algarve; (ii) the intra-annual variability in the incidence of wildfires, characterized by two peaks, one in spring and the other in summer, are a consequence of the country's type of climate; and, (iii) how the annual cycle of wildfire incidence varies over the years depends on the weather conditions throughout each year. These results are of fundamental importance for wildfire managers, especially in the context of climate change.

ClinVar is a web platform that stores around 774k curated entries, which allows exploring genetic variants and their associations with complex phenotypes. A partial set of ClinVar’s genetic associations were reported with conflict of interpretation or uncertain clinical impact significance, which currently challenges clinicians and geneticists. Here, we evaluate the performance of data pre-processing methods combined with classical prediction methods, such as Naive Bayes, Random Forest, and Support Vector Machine to build a meta-prediction model aiming to improve genetic pathogenicity interpretation. Models were trained with ClinVar data (September 2020), and genetic variants were annotated with eight functional impact predictors catalogued with SnpEff/SnpSift (v4.3). A 10-fold cross-validation strategy was performed for evaluation by accuracy, F1-Score, Receiver Operating Characteristic, Area Under Curve. The best meta-prediction model raises by combining one-hot encoding with tree-based classifiers as Random Forest, which shows Area Under Curve ≥ 0,93. We predict pathogenicity for 109k genetic variants, which were found labeled as uncertain significance or conflict of interpretation. Additionally, we implemented AmazonForest (https://www.lghm.ufpa.br/amazonforest), a web tool to query data for a set of 5k variants that were predicted with high pathogenic probability (RFprob >= 0.9).

Despite a global push in the development and implementation of widespread alternative energy use, significant disparities exist across given nation-states. These disparities, frequently referred to as the local-national gap, reflect both technical and economic factors, as well as the social, political, and ecological gaps between how communities see energy development and national/global policy goals. This dataset is an attempt to bridge the local-national gap regarding solar PV adoption in the state of Georgia (U.S.A.). This dataset is an aggregation of variables from seven different publicly-available sources that was designed to help researchers interested in the context underlying solar adoption on the local scale of governance (e.g. the county level). The SolarView database includes information necessary for informing policymaking activities such as solar installation information, a historical county zip code directory, county-level census data, housing value indexes, renewable energy incentive totals, PV rooftop suitability percentages, and utility rates. As this is a database from multiple sources, incomplete data entries are noted.

HIV-1 infection can activate the expression of human endogenous retroviruses (HERVs), particularly HERV-K (HML-2). HIV controllers (HICs) are rare people living with HIV (PLWH) who naturally control HIV-1 replication. The ability of HICs to control the expression of endogenous retroviruses has not been previously addressed. In this study, we measured ERVK-6 RNA expression in PBMCs of HICs (n = 23), antiretroviral (ART)-suppressed subjects (n = 8), and HIV-1-negative (NEG) individuals (n = 10) and correlated the transcript expression of ERVK-6 with multiple HIV-1 restriction factors. Our study reveals that ERVK-6 RNA expression in PBMCs from HICs was significantly downregulated compared with both ART and NEG control groups. Moreover, we detected that ERVK-6 RNA levels in PBMCs across all groups were negatively correlated with the expression levels of p21 and MCPIP1. In our previous study, these two cellular restriction factors were upregulated in HICs compared with control groups. Interestingly, p21 and MCPIP1 limit the activation of macrophages and T cells by downregulating the activity of NF-kB, a transcription factor that stimulates the LTR-driven transcription of HIV-1 and HERV-K proviruses. These findings support that HICs activate innate antiviral mechanisms that may simultaneously downregulate the transcription of both HIV-1 and endogenous retroviruses.

Uncertainty relations in hydrodynamics are numerically studied. We first give a review for the formulation of the generalized uncertainty relations in the stochastic variational method (SVM), following the work by two of the present authors [Phys.\ Lett.\ A\textbf{382}, 1472 (2018)]. In this approach, the origin of the finite minimum value of uncertainty is attributed to the non-differentiable (virtual) trajectory of a quantum particle and then both of the Kennard and Robertson-Schr\"{o}dinger inequalities in quantum mechanics are reproduced. The same non-differentiable trajectory is applied to the motion of fluid elements in the Navier-Stokes-Fourier equation or the Navier-Stokes-Korteweg equation. By introducing the standard deviations of position and momentum for fluid elements, the uncertainty relations in hydrodynamics are derived. These are applicable even to the Gross-Pitaevskii equation and then the field-theoretical uncertainty relation is reproduced. We further investigate numerically the derived relations and find that the behaviors of the uncertainty relations for liquid and gas are qualitatively different. This suggests that the uncertainty relations in hydrodynamics are used as a criterion to classify liquid and gas in fluid.

Iron-containing nickel sulfides, selenides, and sulfoselenides were synthesized via a simple two-step hydrothermal reaction (temperature 160 °C) for their application as electrocatalysts in the oxygen evolution reaction (OER) in an alkaline solution (1 mol L–1 KOH). The study demonstrated that iron-containing nickel cobalt sulfides and selenides exhibit superior OER performance with lower overpotentials compared to iron-free nickel cobalt sulfide and selenide, which highlights the significant role of iron in enhancing OER nickel cobalt electrocatalysts: Fe0.1Ni1.4Co2.9(S0.87O0.13)4, η50 = 318 mV; Fe0.2Ni1.5Co2.8(S0.9O0.1)4, η50 = 310 mV; Fe0.3Ni1.2Co2.5(S0.9O0.1)4, η50 = 294 mV; Fe0.6Ni1.2Co2.5(S0.83O0.17)4, η50 = 294 mV, Fe0.4Ni0.7Co1.6(Se0.81O0.19)4, η50 = 306 mV compared to Ni1.0Co2.1(S0.9O0.1)4, η50 = 346 mV and Ni0.7Co1.4(Se0.85O0.15)4, η50 = 355 mV (all values at current densities η50 of 50 mA cm–2). Furthermore, the iron-containing nickel cobalt sulfoselenide Fe0.5Ni1.0Co2.0(S0.57Se0.25O0.18)4 displayed exceptional OER performance with η50 = 277 mV, surpassing the benchmark RuO2 electrode with η50 = 299 mV. The superior performance of the sulfoselenide was attributed to its low charge transfer resistance (Rct) of 0.8 Ω at 1.5 V vs. the reversible hydrogen electrode (RHE). Moreover, the sulfoselenide demonstrated remarkable stability, with only a minimal increase in overpotential (η50) from 277 mV to 279 mV after a 20 h chronopotentiometry test. These findings suggest that trimetallic iron, nickel and cobalt sulfide, selenide and especially sulfoselenide materials hold promise as high-performance, cost-effective, and durable electrocatalysts for sustainable OER reactions. This study provides a valuable approach for the development of efficient electrocatalytic materials, contributing to the advancement of renewable energy technologies.

Abstract: Rotavirus (RV) it’s the agent of one of the main causes of severe viral gastroenteritis in the pediatric population, being responsible for a significant portion of deaths related to diarrhea among children under five years. RV are identified as a potential reference pathogen and it is known that the persistence and infectivity of the viral particles can be related to environmental factors. The aim of the study was to identify and correlate the presence of Rotavirus in collective and individual water sources (deep tubular wells, shallow tubular wells, shallow dug wells, springs, surface water, rainwater stored in cisterns and water trucks that were collected from surface water) of rural communities in the state of Goiás, with the seasons in which the collections were made (rainy and dry season). For this, 86 water samples in the dry period and 160 samples in the rainy period were collected. Concentration of water samples, extraction of viral genetic material, cDNA synthesis and molecular tests (qPCR) were performed. When analyzing the presence of RV in the samples in relation to the period studied, RV was found to be more prevalent in the dry season (54.7%) than in the rainy season (20%), showing a strong statistical association with the dry season (p-value < 0.001). The proportion of positive samples in the dry period, considering the type of source, resulted in higher in Shallow dug wells (p-value <0.001), higher in surface waters (p = 0.001) and higher in spring water (p-value = 0.02). The presence of pathogenic microorganisms in water is a public risk problem, enabling the emergence of outbreaks, endemics and epidemics. In the present research, there was an association among the presence of Rotavirus and the dry period of the year, when compared to the rainy period. Describing or identifying the seasonal behavior of pathogens is important for prevention and attention to water treatment and help in the monitoring of the virus in the water sources.

Seaweeds have been the target of much attention due to the known bioactivities of some of their compounds. Although many studies about the application of seaweeds in various areas are available, these data are mostly about the raw extracts and not about specific compounds, such as seaweeds pigments. Moreover, the fungal infections of the skin, nails and hair caused by dermatophytes, are the most common fungal infections in humans. These pathologies require long periods of topical and/or systemic treatment that are associated with adverse effects and contraindications. This study had two objectives, the first was to evaluate the possibility of isolating and characterizing the pigments of Calliblepharis jubata and Fucus vesiculosus; the second was to assess their antifungal activity. The extraction of pigments was performed using a method of extraction by exhaustion; the purification was carried out by column chromatography. Three techniques were used to characterize the pigments, thin layer chromatography (TLC), UV-visible spectrophotometry and Fourier-transform infrared spectroscopy (FTIR). The antifungal activity was evaluated using the micro-dilution method, following the EUCAST international standards, on three dermatophytes, Trichophyton rubrum, Trichophyton mentagrophytes and Microsporum canis. It was possible to observe that the extract obtained from the seaweed C. jubata and F. vesiculosus, corresponding to the purified pigment phycobiliprotein, and the crude extract, an enriched extract, obtained from the seaweed C. jubata showed antifungal activity against the three fungal agents of human skin infection.

As use of composite materials increases, the search for suitable automated processes gains relevance to guarantee production quality by ensuring uniformity of the process, minimizing the amount of generated scrap and reducing time and energy consumption. Limitations on production by traditional means such as hand lay-up, vacuum bagging and in-autoclave methods, tend not to be as efficient when the size and shape complexity of the part being produced increases, motivating the search for alternative processes such as the Automated Tape Laying (ATL). This work aims to describe the process of modelling and simulating a composite ATL with in situ consolidation by characterizing the machine elements, using the finite differences method in conjunction with energy balances, in order to create a digital twin of the process for further control design. The modelling approach implemented is able to follow the process dynamics when changes to the heating element are imposed as well as to predict the composite material temperature response, making it suitable to work as a digital twin of a production process using an ATL machine.

The adoption of harmful postures due to a sedentary lifestyle, which involves long periods at work in offices, is a factor that exacerbates musculoskeletal risks. To examine these risks, there are numerous postures analysis methods, such as Rapid Upper Limb Assessment (RULA) and Rapid Office Strain Assessment (ROSA). RULA is a consolidated method to evaluate the exposure of individual workers to ergonomic risk factors associated with upper extremity musculoskeletal disorders. In turn, ROSA is a more recent method that quantifies exposure to risk factors in an office work environment. This research aims to identify whether there is harmony between these two methods, ROSA and RULA. Through applied research, from a qualitative perspective, the scientific procedures adopted were direct observation and ROSA and RULA postural assessment instruments. The study was conducted in the radiology service and focused on the outpatient reception workstation. Results indicated that further investigation must occur to make working conditions changes as soon as possible and that both methods are harmonic. As contributions of the analysis, we have discussed the working conditions and suggested improvements to reduce the risks of musculoskeletal morbidity symptoms. We recommend future studies aimed at measuring the levels of complementarity between these methods by quantitative approaches.

The accurate prediction of molecular properties such as lipophilicity and aqueous solubility are of great importance and pose challenges in several stages of the drug discovery pipeline. Machine learning methods like graph-based neural networks (GNNs) have shown exceptionally good performance in predicting these properties. In this work, we introduce a novel GNN architecture, called directed edge graph isomorphism network (D-GIN). It is composed of two distinct sub-architectures (D-MPNN, GIN) and achieves an improvement in accuracy over its sub-architectures employing various learning, and featurization strategies. We argue that combining models with different key aspects help make graph neural networks deeper and simultaneously increase their predictive power. Furthermore, we address current limitations in assessment of deep-learning models, namely, comparison of single training run performance metrics, and offer a more robust solution.

In the present study, a numerical model was developed to predict the flow pattern inside a broiler building. The model intends to predict the velocities fields inside the domain and ammonia (NH3) emitted or released by litter from poultry housing. The numerical model developed in Computational Fluid Dynamics (CFD) commercial code, intends to represent a commercial broiler building, and intends to simulate the 3D and heat transfer, in steady state flow. The evaporative cooling pads were also included in the model. The validation of the model was based in experimental measurements obtained in previous studies. The simulations were focused on Summer, Winter and also Mid-Season situation. The numerical results of NH3 concentration were compared with the experimental measurements, and a quite good agreement was verified. The numerical results allowed the characterization of: the inside flow pattern developed for the summer and winter situation; the inside NH3 distribution, and the velocity field distribution inside the broiler building. It was found that NH3 concentration increases along the tunnel, especially in low flow rate imposed from the exhaust fan. Also, it was verified that the low velocities inside domain are no sufficient to remove the gaseous pollutants.

There is a large body of research on determining the impact of field variability of soil on crop yields. In contrast, site-specific information about crop responses to agronomic treatments is less frequent. On-Farm Precision Experimentation (OFPE) brings important information to understand the spatial variation of crop response to agronomic practices and thus to improve agronomic decisions. The objective of this work was to investigate the spatial variability of corn yield responses to nitrogen and seed rates using OFPE in four fields in the US Midwest. Geographically weighted regression was applied to generate local regression coefficients, which were used to delineate response zones in each field. The results showed the existence of great potential to adjust the rates of these inputs according to the response of each zone identified by the proposed method. The results of this study can be applied to reevaluate expectations on variable rate prescriptions guided largely by soil and variability.

Abstract: Lipodystrophies (LDs) are rare, complex disorders of the adipose tissue characterized by selective fat loss, altered adipokines profile and metabolic impairment. Sirtuins (SIRTs) are class III NAD+-dependent histone-deacetylases linked to fat metabolism. SIRT1 plays a critical role in metabolic health by deacetylating target proteins in tissues including liver, muscle and adipose tissue. Circulating SIRT1 levels have been found to be reduced in obesity while increased in anorexia nervosa and in patients experiencing weight loss. We evaluated circulating SIRT1 levels in relation to fat amount in 32 lipodystrophic patients affected by congenital or acquired LDs compared to non-LD subjects (24 with anorexia nervosa, 22 normal weight and 24 with obe-sity). SIRT1 serum levels were higher in LDs as compared with normal weight subjects (mean ± SEM: 4.17 ± 0.48 vs. 2.59 ± 0.20 ng/mL) or subjects with obesity (1.7 ± 0.39 ng/mL), whereas they were close to those measured in anorexia nervosa (3.44 ± 0.46 ng/mL). Our findings show that within the LD group there was no relationship between SIRT1 levels and the amount of body fat. The mechanisms responsible for secretion and regulation of SIRT1 in LD deserve further investi-gation.

The advancement of mechanization in forestry has increased productivity in the forestry sector, bringing positive and negative impacts that require a deeper understanding for sustainable forest management. This study aimed to apply a simplified instrument for assessing damage and environmental impacts in forest harvesting of commercial eucalyptus plantations, using a combination of methodologies. The methodology used combined interaction networks and impact assessment matrices, carrying out field surveys, transposing them to interaction networks and weighting them through assessment matrices, resulting in environmental indices (ES) for prioritizing actions. The study was conducted on a commercial eucalyptus plantation in the municipality of São Pedro, São Paulo, Brazil. The mechanized harvesting of the area consists of the structure of a module with a mobile unit consisting of a harvester and forwarder. The results indicated that wood transport presented the highest ES, both positive and negative. The most significant negative impacts (ES) were the depletion of water resources and erosion, while the positive impacts included regional development and job creation. The most notable changes, positive and negative, were observed in the physical and anthropic environment, with a lesser impact on the biotic environment.

(1) Background: The purpose of this study was to investigate the relationship between IMO and burnout while assessing the contribution of job demands and resources on increasing internal orientation and worker well-being and, consequently, the levels of perceived performance; (2) Methods: Data were collected between April and December 2021 by completing an online questionnaire, developed in the Google Forms platform. The following descriptive statistics were analyzed: measures of central tendency (mean), dispersion (standard deviation), minimum value and maximum value. Next, Pearson's correlation coefficient was calculated to analyze the relationship between the variables under study.; (3) Results: The results showed the mediating effect of IMO between performance feedback and perceived performance, while burnout mediates the relationship between emotional and technology demands and perceived performance. (4) Conclusions: These conclusions demonstrate that constructive feedback might help a more efficient performance through better internal communication and the positive effects of technology demands could be the result of the interaction between personal and organizational resources.

The knowledge of the optical properties of biological tissues in a wide spectral range is highly important for the development of noninvasive diagnostic or treatment procedures. The absorption coefficient is one of those properties, from which various information about tissue components can be retrieved. Using transmittance and reflectance spectral measurements acquired from ex vivo rabbit brain cortex samples, allowed to calculate its optical properties in the ultraviolet to the near infrared spectral range. Melanin and lipofuscin, the two pigments that are related to the ageing of tissues and cells were identified in the cortex absorption. By subtracting the absorption of these pigments from the absorption of the brain cortex, it was possible to evaluate the true ratios for the DNA/RNA and hemoglobin bands in the cortex – 12.33 fold (at 260 nm), 12.02 fold (at 411 nm) and 4.47 fold (at 555 nm). Due to the fact that the accumulation of melanin and lipofuscin increases with the ageing of the brain tissues and are related to the degeneration of neurons and their death, further studies should be performed to evaluate the evolution of pigment accumulation in the brain to prevent the development of Alzheimer, Parkinson and stroke pathologies in the brain.

Recent progress in deep learning has led to accurate and efficient generic object detection networks. Training of highly reliable models depends on large datasets with highly textured and rich images. However, in real-world scenarios, the performance of the generic object detection system decreases when (i) occlusions hide the objects, (ii) objects are present in low-light images, or (iii) they are merged with background information. In this paper, we refer to all these situations as challenging environments. With the recent rapid development in generic object detection algorithms, notable progress has been observed in the field of object detection in challenging environments. However, there is no consolidated reference to cover state-of-the-art in this domain. To the best of our knowledge, this paper presents the first comprehensive overview, covering recent approaches that have tackled the problem of object detection in challenging environments. Furthermore, we present the quantitative and qualitative performance analysis of these approaches and discuss the currently available challenging datasets. Moreover, this paper investigates the performance of current state-of-the-art generic object detection algorithms by benchmarking results on the three well-known challenging datasets. Finally, we highlight several current shortcomings and outline future directions.

Here, applying the theory of the generalization of the Boltzmann constant in curved space-time, we will model the mechanism by which elementary particles are formed. We will determine the relationship between gravity and each of the elementary particles that form the standard model following analogies to that of stellar bodies. In order to achieve our goal, we will propose new models for photons, quarks and gluons; with this, we will demonstrate why there are stable and unstable elementary particles; why the first family of elementary particles forms hadrons and why the second and third families cannot form hadrons; why the fermions comply with the Pauli exclusion principle and why the bosons do not comply with the Pauli exclusion principle, etc. Finally, we will analyse the generalization of the ADS/CFT correspondence and propose a theory of everything (T.O.E.).

Biodiesel is seen as a successor to diesel of petrochemical origin, as it can be used in cycle engines and stationary engines, and be obtained from renewable raw materials. Currently, the biodiesel production process on an industrial scale is mostly carried out through the transesterification reaction, also forming glycerol as a product. Pure glycerol is used in the pharmaceutical, cosmetic, cleaning, food and other industries. Even presenting numerous applications, studies indicate that there is a saturation of glycerol in the market which is directly related to the production of biodiesel. This increase causes a commercial devaluation of pure glycerol; making the separation and purification processes unfeasible from an economic point of view. Despite the economic unfeasibility of the aforementioned processes, they continue to be carried out due to environmental issues. Faced with the problem presented, this work aims at a bibliographical review of works that aimed to use glycerol as a raw material for the production process of biofuels, these processes being carried out mostly via fermentation.

This study aimed to compare three different extracts of Saco sweet cherry, namely non-coloured fraction, coloured fraction and total extract concerning phenolic composition, antioxidant and antidiabetic potential, erythrocytes’ protection and effects on Caco-2 cells. A total of 22 phenolic compounds were identified by LC-DAD. Hydroxycinnamic acids were the most predominant in both non-coloured fraction and total extract, while cyanidin-3-O-rutinoside was the main anthocyanin found in the coloured fraction. The total extract was the most effective against DPPH, nitric oxide and superoxide radicals, and in the inhibition of α-glucosidase enzyme. Finally, the protective effect of the extracts to prevent oxidative damage in human erythrocytes was assessed. The coloured fraction revealed the best activity against hemoglobin oxidation and hemolysis. Regarding to Caco-2 cells, the coloured extract exhibited the most cytotoxic effects, while the total extract was the most efficient in protecting these cells against oxidative damage induced by t-BHP.

Photoacoustic spectroscopy allows the identification of specific molecules in gases. We evaluate the spectral resolution and detection limits for a PAS system in the broadband infrared wavelength region 3270 nm ≲ λ ≲ 3530 nm driven by a continuous wave optical parametric oscillator with P ≈ 1.26 W by measuring the absorption of diluted propane, ethane and methane test gases at low concentrations c ~ 100 ppm for ~1350 discrete wavelengths λ_i. The resulting spectra I_PAS(λ_i) were compared to the high resolution cross section data σ_FTIR obtained by Fourier Transform Infrared Spectroscopy from the HITRAN database. Deviations as little as 7.1(6)% for propane, 8.7(11)% for ethane and 15.0(14)% for methane with regard to the average uncertainty between I_PAS(λ_i) and the expected reference values based on σ_FTIR were recorded. The wavelengths λ_res of the characteristic absorption lines can be pinpointed with a high relative accuracy <5 × 10⁻⁵ corresponding to a resolution of λ_res ~ 0.16 nm. Detection limits range between 7.1 ppb (ethane) to 13.6 ppb (methane) coinciding with high experimental signal-to-noise ratios. Moreover, using EUREQA, an artificial intelligence program, simulated mixed gas samples at low limits of detection could be deconvoluted. These results justify a further development of PAS technology to support, e.g., biomedical research.

In a wide range of lymphoid neoplasms, the process of malignant transformation is associated to somatic mutations in B cells that affect the epigenetic machinery. Consequential alterations in histone modifications contribute to disease-specific changes in the transcriptional program. Affected genes commonly play important roles in cell cycle regulation, apoptosis-inducing signal transduction and DNA damage response, thus facilitating the emergence of malignant traits that impair immune surveillance and favor the emergence of different B-cell lymphoma subtypes. In the last two decades, the field has made a major effort to develop therapies that target these epigenetic alterations. In this review, we discuss which epigenetic alterations occur in non-Hodgkin B-cell lymphoma. Furthermore, we aim to present in close to comprehensive manner the current state-of-the-art in the preclinical and clinical development of epigenetic drugs. We focus on therapeutic strategies interfering with histone methylation and acetylation as these are most advanced in being deployed from the bench-to-bedside and have greatest potential to improve the prognosis of lymphoma patients.

According to the World Health Organization, about 15% of the world’s population has some form of disability. Assistive Technology, in this context, contributes directly to the overcoming of difficulties encountered by people with disabilities in their daily lives, allowing them to receive education and become part of the labor market and society in a worthy manner. Assistive Technology has made great advances in its integration with Artificial Intelligence of Things (AIoT) devices. AIoT processes and analyzes the large amount of data generated by IoT devices and applies Artificial Intelligence models, specifically Machine Learning, to discover patterns for generating insights and assisting in decision making. Based on a systematic literature review, this article aims at identifying the Machine Learning models used in multiple different research about Artificial Intelligence of Things applied to Assistive Technology. The survey of the topics approached in this article also highlights the context of such research, their application, IoT devices used, and gaps and opportunities for further development. Survey results show that 50% of the analyzed research address visual impairment, and for this reason, most of the topics cover issues related to computational vision. Portable devices, wearables, and smartphones constituted the majority of IoT devices. Deep Neural Networks represent 81% of the Machine Learning models applied in the reviewed research.

We are going to demonstrate the origin of dark energy, using a Hardwire similarity, a test that is carried out in terrestrial seismic with vibroseis in the search for gas and oil. In the first instance, we are going to analyse the mathematical function of Dirac's delta and compare it with the detonation of an explosive that is carried out in the search for gas and oil. Let's understand that in both cases a frequency spectrum is produced. We will also explain the meaning of a non-causal, zero-phase system; a causal system, of minimum phase, in order to determine the mathematical behaviour that corresponds to the Big Bang. Next, following the line of seismic, we will analyse a Hardwire Similarity to demonstrate that a vibroseis source, which generates a sweep, produces, in addition to the ideal sweep of fundamental frequencies, spurious harmonic frequencies and additional noise. We will show that this additional energy generated by the spurious harmonic frequencies and additional noise adds to the energy of the fundamental frequency sweep in analogy as dark energy does.

Viral infections inflict many serious human diseases, being responsible for remarkably high mortality rates. In this sense, both the academy and the pharmaceutical industry are continuously searching for new compounds with antiviral activity, and in addition, face the challenge of developing greener and more efficient methods to synthesize these compounds. This becomes even more important with drugs possessing stereogenic centers as highly enantioselective processes are required. In this minireview, the advances achieved to improve synthetic routes efficiency and sustainability of important commercially antiviral chiral drugs are discussed, highlighting the use of organocatalytic methods.

Signaling modules that integrate the diverse extra- and intracellular inputs to control cell proliferation are essential during both development and adult stages to guarantee organism homeostasis. Mobs are small adaptor proteins that participate in several of these signalling pathways. Here we review recent advances unraveling Mob4 cellular functions, a highly conserved non-catalytic protein, that plays a diversity of roles in cell proliferation, sperm cell differentiation and simultaneously is involved in synapse formation and neural development. In addition, the gene is often overexpressed in a wide range of tumors and is linked to poor clinical outcomes. Nevertheless, Mob4 molecular functions remain poorly defined, although it integrates the core structure of STRIPAK, a kinase/phosphatase protein complex, that can act upstream of the Hippo pathway. In this review we focus on the recent findings of Mob4 functions, that have begun to clarify its critical role on cell proliferation and development of tissues and individuals.

Caffeine is a naturally occurring alkaloid found in various plants. It acts as a stimulant, antioxidant, anti-inflammatory and even an aid in pain management, and is found in several over-the-counter medications. This naturally derived bioactive compound is the best-known ingredient in coffee and other beverages, such as tea, soft drinks, and energy drinks, and is the most widely consumed substance worldwide. Therefore, it is extremely important to research the effects of this substance on the human body. With this in mind, caffeine and its derivatives have been extensively studied to evaluate its ability to prevent diseases and exert anti-aging and neuroprotective effects. This review is intended to provide an overview of the effects of caffeine on cancer, cardiovascular, immunological, inflammatory, and neurological diseases, among others. The heavily researched area of caffeine in sports will also be discussed. Finally, recent advances in the development of novel formulations, in the form of dietary supplements of caffeine and nanocarriers, to enhance the bioavailability of caffeine and its beneficial effects will be discussed. On the other hand, caffeine may contribute to elevated blood pressure, anemia, and migraine.

Agricultural crops productivity is heavily influenced by the strength of their seeds. Current methods for testing seed vigor, such as the germination rate and tetrazolium test, rely on time-consuming human visual inspections. Computer Vision, a crucial technology in smart production processes, offers an automated alternative and is increasingly applied in digital agriculture processes. Here we propose a method that combines YOLOv8 and morphological analysis of seeds using X-ray images to aid seed quality analysts in classifying seed lots based on their physiological potential. We examined the internal morphology of three seed lots and generated X-ray images to train a YOLOv8-based model with a post-segmentation module. This model assessed various parameters such as the total seed area, area filled by the embryo and endosperm, length, width, and calculated the percentage occupied by the embryo and endosperm in relation to the total seed area. Subsequently, seeds were classified into four categories based on the internal area occupied by the endosperm and embryo. Our findings reveal the robust performance of the YOLOv8 model in segmenting and classifying despite the challenges posed by a relatively small dataset. Notably, the proposed model achieved an impressive accuracy of up to 95.6% in identifying and segmenting the endosperm over 1,500 epochs with just 15 training images. The endosperm/seed area ratio, particularly within the 50-60% range covering over 50% of the samples, emerged as a significant metric for evaluating the viability of seed batches.

With the rising trends in elderly populations around the world, there is a growing interest in understanding how climate sensitivity is related to their thermal perception. Therefore, we analyzed the associations between mortality in the elderly due to cardiovascular (CVD) and respiratory diseases (RD) and meteorological variables, for three cities in the State of São Paulo, Brazil: Campos do Jordão, Ribeirão Preto and Santos, from 1996 to 2017. We applied the Autoregressive Model Integrated with Moving Average (ARIMA) and the Principal Component Analysis (PCA) in order to evaluate statistical associations. Results showed CVD as a major cause of mortality, particularly in the cold period, when a high mortality rate is also observed due to RD. The mortality rate was higher in Campos do Jordão and lower in Santos (and intermediate values in Ribeirão Preto). Campos do Jordão results indicate an increased probability of mortality from CVD and RD due to lower temperatures. In Ribeirão Preto, the lower relative humidity may be related to the increase in CVD and RD deaths. This study emphasizes that, even among subtropical climates, there are significant differences. Therefore, this can assist decision makers in the implementation of mitigating and adaptive measures.

Optical current sensors have been developed and improved in recent decades, and their use has been widespread in power systems, including smart grids. Like any measuring instrument or system, the result of its measurements is associated with a measurement uncertainty, which quantifies its precision. This article presents a review of the main uncertainty contributions that affect the quality and performance of optical current sensors.

Air pollution is an important public health issue. High levels of carbon monoxide in the atmosphere are hazardous to human health. Studies regarding the concentration of this and other gases in the atmosphere allow political actions to manage and reduce the emission of pollutants. In this context, this paper studied the annual, seasonal and daily variations of carbon monoxide (CO) concentration for the Metropolitan Region of São Paulo (MRSP). We studied three sites in the MRSP, chosen due to the longer time series and the localities. Two of them are located in areas under the influence of heavy vehicle traffic (Osasco and Congonhas) and the third one in a city park (Ibirapuera Park). The results showed high influence of gasoline vehicles on CO emission. In the annual scale, instead of following the increasing number of vehicles, CO emission and concentration decreased due to improvements in emission technology. CO emission showed a seasonal, weekly and diurnal cycle. The highest values of mean concentration were observed in June/July for Osasco (2.20 ppm), Congonhas (2.04 ppm) and Ibirapuera (1.04 ppm), during the morning, due to weak dispersion of the polluting gases.

Anthocyanins are among the best-known phenolic compounds and possess remarkable biological activities, including antioxidant, anti-inflammatory, anticancer, and antidiabetic effects. Despite their therapeutic benefits, they are not widely used as health-promoting agents due to their insta-bility, low absorption, and thus, low bioavailability and rapid metabolism in the human body. Recent research suggests that the application of nanotechnology could increase their solubility and/or bioavailability, and thus, their biological potential. Therefore, in this review, we decided to provide, for the first time, a comprehensive overview of in vitro and in vivo studies on nanocarriers used as delivery systems of anthocyanins, and their aglycones, i.e., anthocyanidins alone or com-bined with conventional drugs to the treatment or management of chronic diseases.

The ingestion of ethanol presents a significant global public health challenge. Chronic alcohol consumption is associated with the development of conditions such as cancer, cirrhosis, hepatic diseases, cardiovascular diseases, and diabetes, as well as neurological impairments that may predispose individuals to dementia, schizophrenia, and behavioral disorders such as violence and suicide. Alcohol-related fatalities constitute 5.3% of worldwide deaths annually, totaling approximately 3 million. Notably, alcohol consumption is implicated in 25% of cirrhosis-related deaths and 4.1% of cancer-related deaths. Taurine (2-aminoethanesulfonic acid) is a non-protein β-amino acid essential for cellular homeostasis, possessing antioxidant, anti-inflammatory, and cytoprotective properties crucial for life maintenance. This study aimed to evaluate the effects of taurine administration on hippocampal neurogenesis, neuronal preservation or reverse damage in rats exposed to forced ethanol consumption. Results demonstrated the neuroprotective effects of taurine on ethanol-treated rats, promoting tissue regeneration and suggesting its pivotal role in this process. However, this aminoacid failed to induce neurogenesis in the tissues of healthy rats, implying that its activity may be contingent upon post-injury stimuli.