Stevia rebaudiana (Bert.) is a natural sweetener with diterpenic glycosides, offering 300 times more sweetness than sucrose, and boasting low-calorie content, along with medicinal and therapeutic properties. To address a limited genetic diversity, a germplasm bank comprising 115 segregated lines of stevia was established in Colombia. Notwithstanding, the fungus Athelia rolfsii adversely impacted key stevia lines, leading to wilting and plant mortality. For this reason our study aimed to explore the biocontrol potential of native strains of Trichoderma spp., isolated from productive lots in Colombia's Cordoba department, as a solution to manage A. rolfsii. Soil samples underwent serial dilution technique (103 conidia.mL-1) to obtain Trichoderma spp. isolates, which were thoroughly morphologically and molecularly characterized. A total five native strains were identified through sequencing the PCR products using universal ITS primers, and comparisons with the GENBANK database confirmed their identity (OK310695.1, ON237703.1, ON238106.1, ON237737.1, and ON237923.1). Their biocontrol efficacy against A. rolfsii was evaluated using the dual culture technique. Remarkably, all strains exhibited significant biocontrol capacity against the A. rolfsii isolate INVEPAR-05 (OK271308.1), except for Trichoderma viride INVEPAR-T10 (ON237923.1). These findings suggest that Trichoderma spp. could be a potential option to manage the fungus in stevia.

Background: Gram-negative bacteremia, especially from Klebsiella spp., Escherichia coli, and Pseudomonas aeruginosa, poses a significant public health threat due to multidrug resistance and high mortality rates. Cost-effective treatments are essential in low-middle income countries as Colombia. Methods: This descriptive, phase IV study was conducted in a tertiary care hospital in Colombia. Adult patients with Gram-negative bacteremia treated with generic piperacillin/tazobactam (Penibactam®) were evaluated. Clinical and microbiological responses were assessed over 12 months. Results: The study included 30 critically ill patients with an average APACHE II score of 22.12. The clinical response at day 7 was 66% (n = 20), and the microbiological response was 56.7% (n = 17). By the end of follow-up, clinical improvement was observed in 63.3% (n = 19), with a mortality rate of 23% (n = 7). The cardiovascular system was the most common infection site. Conclusions: Generic piperacillin/tazobactam demonstrated effectiveness and safety comparable to existing literature in treating Gram-negative bacteremia, offering a viable, cost-effective alternative for critically ill patients in real-world settings.

Objectives: To assess the short-term impact of a single global stretching session on plantar pressures and lumbar range of motion (RoM) over one week in sedentary university students. Design: A randomised controlled trial with two parallel groups. Participants: Sixty-four university students were randomly assigned to a stretching group or control group. The stretching group received a single session of global stretching and the control group remained seated for the same length of time as the stretching session. Main outcome measures: Lumbar RoM and plantar pressures were assessed before, immediately after, 48 hours after, and 7 days after intervention. Results: Group-by-time interaction was significant for lumbar lateral flexion (p = 0.044), right maximal pressure (p = 0.003), left maximal pressure (p = 0.008), right mean pressure (p = 0.025), left mean pressure (p = 0.002), and maximal pressure minus mean pressure in right foot (p = 0.007). The model with plantar pressures showed a significant difference for group-by-time interaction (p = 0.010).Conclusion: Global stretching seems to counteract the ill-effects of prolonged sitting up to seven days with respect to plantar pressure in standing without improving lumbar ROM

Strandings are one of the most worrying issues in relation to the conservation of cetacean species, and in the case of Chile, due to its geography and large extension of the coastline, monitoring and access to these events is difficult, making their study more complex. Chile has a shortage of specialized scientific forensic research facilities for cetacean; however, for this study it was able to collect data recorded from official institutions and sporadic scientific biological sampling oriented to investigate the causes of death or stranding. According to the Chilean government official database, we described that the main causes of unusual mortality events (UME) and mass strandings from year 2015 and 2016 were acute poisoning by biotoxin and trauma to the auditory complex, respectively, while individual strandings would have their causes in anthropogenic activities such as entanglements in fishing an aquaculture gear and collisions with vessels. The predominant species in mass strandings was the sei whale (Balaenoptera borealis). The geographical area of greatest prominence in mass strandings was the Aysén Region in the Central Patagonia of Chile, while the species mostly involved in individual strandings along the south-central, central, and northern coast of Chile was the small porpoise (Phocoena spinipinnis). The most common gross pathological findings were advance decay of the carcasses and nonspecific wounds of different nature, difficult to associate with possible causes of death without further histopathological studies.

The design and engineering of antibacterial materials is key for preventing bacterial adherence and proliferation in biomedical and house-hold instruments. Silver nanoparticles (AgNPs) and chitosan (CHI) are broad-spectrum antibacterial materials with different properties, whose combined application is currently under optimization. This study proposes the formation of antibacterial films with AgNPs embedded in carboxymethylcellulose/chitosan multilayers by the layer-by-layer (LbL) method. The films were deposited onto nanoporous silicon (nPSi), an ideal platform for bioengineering applications, due to its biocompatibility, biodegradability, and bioresorbability. We focus on two alternative multilayer deposition processes: cyclic dip coating (CDC) and cyclic spin coating (CSC). The physicochemical properties of the films were the subject of microscopic, microstructural and surface-interface analyses. The antibacterial activity of each film was investigated against Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria strains as model microorganisms. According to the findings, CDC technique produced multilayer films with higher antibacterial activity for both bacteria compared to the CSC method. Bacteria adhesion inhibition was observed from only 3 cycles. The developed AgNPs-multilayer composite film offers advantageous antibacterial properties for biomedical applications.

In the whole world, including Mexico, the rising prevalence of diabetes poses significant challenges to healthcare systems, with a notable impact on hospital admissions even being an ambulatory care sensitive condition, that means, hospital admissions are avoidable. Traditional healthcare methodologies have been instrumental in managing diabetes and preventing complications, yet they often face limitations such as merging, cleansing, and outlier analysis of health data to identify and address diseases effectively. This paper aims to address this gap by conducting a comprehensive comparison of the methodologies used in healthcare and data science for this purpose. This work uses hospital diabetes discharge records from 2010 to 2023, a total of 36,665,793 records, which belong to medical units of the Ministry of Health of Mexico. In this work, we seek to provide the arguments why as a data scientist it is mandatory to learn the field of knowledge of the problem and its implications if this is not done, and therefore to disclose insights that can help in policy decisions and reduce the burden of avoidable hospitalizations. The approach is mainly based on the standardization or adjust rates by sex and age groups. This study provides the foundations for a new way of data scientist must deal with health data.

The diagnosis and treatment of autoimmune diseases are major challenges. Their signs, symptoms, and their clinical severity change throughout the course of the disease. The available treatments for these conditions do not result in complete remission, and their long-term use generates several side effects. The main challenges in this field are the development of more sensitive diagnostic tools, and effective treatments. Studies in patients and animal models reported alterations in monocyte phenotype, activation, and function. These cells play an essential role in the pathogenesis of chronic inflammatory states and have become a target for extracorporeal monitoring and specific intervention. Nanoparticles (NPs) are ultrafine particles that can be used as contrast agents in diagnostic imaging techniques to detect specific cells in inflammatory infiltrates in tissues that are not easily accessible by biopsy. In addition, NPs can be designed to deliver drugs to a cell population or tissue. This review describes several experimental pieces of evidence demonstrating that monocytes and macrophages can specifically uptake various types of NPs, thus becoming detectable in vivo by magnetic resonance imaging and susceptible to be modulated by therapeutic agents. Hence, nanoparticles targeting mononuclear phagocytes represent promising tools for diagnosing and treatment.

Wearable vital signs monitoring and specially the electrocardiogram have taken important role due to the information that provide about high-risk diseases, it has been evidenced by the needed to increase the health service coverage in home care as has been encouraged by WHO. Some wearables devices have been developed to monitor the ECG in which the location of the measurement electrodes is modified respect to the Einthoven model. However, mislocation of the electrodes on the torso can lead to the modification of acquired signals, diagnostic mistakes and misinterpretation of the information in the signal. This work presents a volume conductor evaluation and an ECG signal waveform comparison when the location of electrodes is changed, to find a electrodes’ location that reduces distortion of interest signals. In addition, effect of motion artifacts and electrodes’ location on the signal acquisition are evaluated. A group of volunteers was recorded to obtain ECG signals, the result was compared with a computational model of the heart behavior through the EA ECG, DTW and SNR methods to quantitatively determine the signal distortion. It was found that while the Einthoven method is followed, it is possible to acquire the ECG signal from the patient’s torso or back without a significant difference, and the electrodes position can be moved 6cm at most from the suggested location by the Einthoven triangle in Mason-Likar’s method.

The use of different sources to energize a load is convenient in many applications, particularly those where two or more renewable energy sources are employed as: energy harvesting, hybrid vehicles, and off-grid systems. In these cases, a multi-input converter able to admit sources with different characteristics and, if necessary, select the output power of each source. Several topologies of multi-input converters have been proposed to this aim, however, most of them are based on multi-stage designs, which decreases efficiency and increases control complexity, particularly when more than two sources are used. In this work, a three-input step-up converter easy to control in open loop condition is analyzed. A designed procedure is described, and experimental results are presented for a 1 kW power converter. The implemented converter results in a higher voltage gain, less storage element keeping high efficiency compared to similar topologies. Using the procedure here proposed, this converter that was initially proposed for photovoltaic applications is enabled to be used in medium and high-power applications, for example when renewable energy sources are used.

High efficacy LED lamps combined with adaptive lighting control and greenhouse integrated photovoltaics (PV) could enable the concept of year-round cultivation and become a feasible option even in the harsh climate of the Nordic countries. Meteorological satellite data of this region was analyzed in a parametric study to evaluate the potential of these technologies. The generated maps showed monthly average temperatures fluctuating from -20°C to 20°C throughout the year. The natural photoperiod and light intensity also changed drastically, resulting in monthly average daily light integral (DLI) levels ranging from 45-50 mol·m-2·d-1 in summer and contrasting with 0-5 mol·m-2·d-1 during winter. To compensate, growth room cultivation independent from outdoor conditions could be used in winter. Depending on the efficacy of the lamps, the electricity required for sole-source lighting at 300 µmol·m-2·s-1 for 16 hours would be between 1.4 and 2.4 kWh·m-2·d-1. Greenhouses with supplementary lighting could help start the cultivation earlier in spring and extend it further into autumn. The energy required for lighting highly depends on several factors such as the natural light transmittance, the light threshold settings and the lighting control protocol, resulting in electric demands between 0.6 and 2.4 kWh·m-2·d-1. Integrating PV on the roof or wall structures of the greenhouse could offset some of this electricity, with specific energy yields ranging from 400 to 1120 kWh·kWp-2·yr-1 depending on the region and system design.

Drawing on contextualization literature, this paper seeks to evaluate the impact of contextual theology from a Latin American perspective. Bevans' (2002) Praxis Model of contextual theology sets the conceptual framework used to evaluate the evangelical response to the sociopolitical crisis in Nicaragua. The case study provides an example of how Bevans’ Praxis Model can be applied by looking at the manner with which the evangelical and the catholic church have responded to the sociopolitical upheaval in Nicaragua. The literature on contextualization highlights how theologizing is inextricably tied to culture, that contextual theology is necessary to effectively communicate the truth of the Gospel in varying cultural contexts, and that the issues of syncretism and the plurality of theologies can be effectively addressed.

The Haar wavelet decomposition technique is used to detect the planetary magnetosphere boundaries and discontinuities. We use the magnetometer data from the CASSINI and MESSENGER spacecraft to identify the abrupt changes in the magnetic field when the spacecraft crossed the magnetospheric bow shocks and magnetopauses of Saturn and Mercury, respectively. The results confirm that the Haar transform can efficiently identify the planetary magnetosphere boundaries characterized by the abrupt magnetic field changes. It is suggested that this technique can be applied to detect the planetary boundaries as well as the discontinuities such as the shock waves in the interplanetary space.

Conventional academic debate on sustainability and transformation has begun to be disputed by researchers, policymakers and other stakeholders from the private sector. The complexity of linking sustainability with transformation necessitates the development of new ways of understanding and explaining actors, processes, issues, structures, and outcomes related to transformation to sustainability (T2S). A persistent problem in understanding and managing the T2S is the implied notion of a monolithic transformation to achieve sustainability. This notion underestimates the diversity of actors as well as the historical contexts of transformations. At the same time, achieving T2S is highly dependent on technical solutions as well as policies that can stir needed behavioural change, whereas these technical solutions and policies are not always socially acceptable or politically implementable. Therefore, achieving T2S also calls for evaluating normative foundations of policies and actions needed to advance T2S. This article argues that T2S is composed of different phases, each of which having a different set of actors, resources and audience. This article explains how collective decision can be achieved through multiple levels and types of negotiations that occur in an orchestrated manner. To understand this, this article introduces a theoretical model as an analytical framework to structure how T2S unfolds. This model uses insights from negotiation studies to focus on the actors’ perspectives on T2S. It proposes the division of the transformation process into phases – entry point, learning, sequencing, disrupting and fortifying. Using the Germany’s energy transition (Energiewende), each of these phases is analysed to determine the “quality” of cooperation that can help fulfil the tasks required to master the so-called “cognitive games” of T2S (ripeness game, power game, bargaining game, policy game, scaling game). Moreover, insights are presented to explain how the designated milestone can be achieved that indicates the advancing to the next phase and eventually entrench the transformation process. The lessons and findings resulting from the analysis of the phases of T2S suggest that there is also the need to revisit underlying assumptions on negotiations, sustainability and transformation.

Blockchain technology has emerged as a necessity for the decentralization of payment methods and transactions, but it has brought with it many properties of distributed systems that have made it a crucial technology for overcoming some of society's challenges, especially in the context of decentralizing services, transparency of information, availability, and security. Its architecture and communication methods, although possessing some complex nuances to understand, particularly for the lay audience in the field of distributed systems, protocols, and computer networks. In this article, we will explore some topics of distributed systems related to blockchain technology.

Marker-assisted selection (MAS) and genomic selection (GS) have been used to select individuals with desirable traits. MAS used a few markers associated with a specific trait to select individuals with desirable traits, which are determined after a Genome-wide association studies (GWAS). On the contrary, GS uses a large number of markers distributed across the genome to predict the genomic breeding values for a further selection of the individuals. In general, MAS has shown a high prediction accuracy but is not suitable for traits that are controlled for multiple genes, and has another constraint, it is required the phenotypic data; on the contrary, GS has not shown the highest prediction accuracy as MAS but it takes into account the effect of multiple genes controlling a target trait and it can be used without phenotypic data. Including GWAS-selected markers in GS can enhance the reduced prediction accuracy that GS shows in comparison with MAS. Thus, the objective of this study was to compare the prediction accuracy of MAS, and some models of genomic prediction (gBLUP, gBLUP including GWAs-selected markers, and some Bayesian models such as Bayes A, Bayes B, Bayes LASSO and Bayesian Ridge Regression) with GWAS-selected markers incorporated in gBLUP in order to confirm if the incorporation of GWAS in GS increases the prediction accuracy of GS. As a model for this study, it was used data from Sorghum which has shown population structure, to evaluate if the incorporation of GWAs-selected markers into GS improves prediciton accuracy. It was used a sample of 6000 SNPs out of the 265.487 reported in the study conducted by Morris et al (2013), and also it was considered some parameters that affect the efficiency of the selection such as the size of the training population, the heritability, and the number of QTNs. The GWAS-selected SNPs were identified after using the model BLINK. The results showed that the incorporation of GWAS-selected markers enhanced the performance of the genomic selection with similar prediction accuracy as MAS, the number of QTNs and size of the training population affected the accuracy, with higher accuracy with a bigger size of the training population and with a lower number of QTNs, but it seems that the heritability does not have any impact in the model where GWAS-selected SNPs were included in gBLUP.

This work discusses the relationship between foreign direct investment (FDI) and pollution in Spain using an autoregressive distributed lag regression model (ARDL) from 1961 to 2018. The authors apply the theoretical context of pollution haven/halo and conclude that FDI in Spain does not contribute to the transfer of green technologies for cleaner production, despite being included within the European environmental regulatory framework. The authors also verify the adequacy of the environmental Kuznets curve (EKC) and the Load Capacity Curve hypothesis (LCC) in the Spanish environmental context and find that income per capita has a positive effect on environmental sustainability and quality. In this sense, the further development of an efficient renewable energy infrastructure could efficiently drive to a better standards all pollution indexes in Spain, including nuclear energy production, contributing the emissions neutrality aimed by the EU by 2050.

Proteins and DNA exhibit key physical chemical properties that make them advantageous for building nanostructures with outstanding features. Both DNA and protein nanotechnology have growth notably and proved to be fertile disciplines. The combination of both types of nanotechnologies is helpful to overcome the individual weaknesses and limitations of each one, paving the way for the continuing diversification of the structural nanotechnologies. Recent studies have implemented a synergistic combination of both biomolecules to assemble unique and sophisticate protein-DNA nanostructures. These hybrid nanostructures are highly programmable and display remarkable features that create new opportunities to build in the nanoscale. This review focuses on the strategies deployed to create hybrid protein-DNA nanostructures. Here, we will discuss strategies such as polymerization, spatial directing and organizing, coating, rigidizing or folding DNA into particular shapes or moving parts. The enrichment of structural DNA nanotechnology by incorporating protein nanotechnology has been clearly demonstrated and still shows a large potential to create useful and advanced materials with cell-like properties or dynamic systems. It can be expected that structural protein-DNA nanotechnology will open new avenues in the fabrication of nano-assemblies with unique functional applications and enrich the toolbox of bionanotechnology.

This compendium presents new mathematical techniques for modeling Point Absorbers. A combined frequency-time domain framework is developed. It is used to simulate the energy generated by the wave farms. With Matlab and Fortran as a base, this leads to obtain physical variables of primary importance, namely position, velocity and power to energy net balance relationships of absorption. Integration of different degrees of freedom with heave as main executable leads in turn to a single buoy motion focus. Acquisition of the needed hydrodynamic coefficients is provided through application of potential field solvers with Boundary Element Methodology background. Initially, this Wave-to-motion model is validated by comparison with previous experimental results for a floating cone cylinder shape (Buldra-FO3). A single, generic, vertical floating cylinder is contemplated then, that responds to the action of the passing regular waves excitation. Later, two equally sized vertical floating cylinders aligned with the incident wave direction are modeled for a variable distance between the bodies. For both unidirectional regular and irregular waves as an input in deep water, we approximate the convolutive radiation force function term through the Prony method. By changing the spatial disposition of the axisymmetric buoys, using for instance triangular or rectangular shaped arrays of three and four bodies respectively, the study delves into motion characteristics for regular waves. The results highlight efficient layouts for maximizing the energy production whilst providing important insights into their performance, revealing displacement amplification- and capture width-ratios, while deriving in possible interpretations of scenarios related to the known park effect. These terms are encompassed by the novelty of a new conceptual Post-Processing methodology in the field, which leads to obtain an optimal distance for the separated bodies with effective energy absorption in a regular wave regime. The main objective is to generate a tendency within the hydrodynamic field of study, which is the Wave to motion perspective. More generally, this computational excursion envisions and depicts potential fields of study, which will surely enhance new connections and link this renewable energy form. Therefore, this research delves first into the historical and technical background on Ocean Wave Energy. Next, it is in the section regarding Materials and Methods, where boundaries and related equations are introduced step by step, together with latter mentioned case scenarios, and their corresponding configuration parameters. A separate section frames then the scope of results, while finally, there is an ensuing discussion and conclusions for evaluation assessment.

This thesis completion works it out to deepen into diverse modeling techniques for Point Absorbers. A combined frequency-time domain model is conceived, designed and developed in Matlab with Fortran as a base, leading to obtain physical variables of primary importance, namely position, velocity and power to energy net balance relationships of absorption. Integration of different degrees of freedom with heave as main executable leads in turn to a single buoy motion focus. Acquisition of the needed hydrodynamic coefficients is provided through application of NEMOH \& BEMIO solvers due to the Boundary Element Methodology. Initially, this Wave-to-motion model is validated by comparison with previous experimental results for a floating cone cylinder shape (Buldra-FO3). A single, generic, vertical floating cylinder is contemplated then, that responds to the action of the passing regular waves excitation. Later, two equally sized vertical floating cylinders aligned with the incident wave direction are modeled for a variable distance between the bodies. For both unidirectional regular and irregular waves as an input in deep water, we approximate the convolutive radiation force function term through the Prony method. By changing the spatial disposition of the axisymmetric buoys, using for instance triangular or rectangular shaped arrays of three and four bodies respectively, the study delves into motion characteristics for regular waves. The results highlight efficient layouts for maximizing the energy production whilst providing important insights into their performance, revealing displacement amplification- and capture width-ratios, while deriving in possible interpretations of scenarios related to the the known park effect. These terms are encompassed by the novelty of a new conceptual Post-Processing methodology in the field, which leads to obtain an optimal distance for the separated bodies with effective energy absorption in a regular wave regime. In conclusion, this computational excursion envisions and proposes potential fields of study, which will surely enhance new connections and link this renewable energy form.

The molecular structure and vibrational spectra of six 1,2,3-triazoles-containing molecules with possible anticancer activity were investigated. In two of them, the optimized geometry was determined in the monomer, cyclic dimer and staking forms using the B3LYP, M06-2X and MP2 methods. The effect of the para-substitution in the aryl ring was evaluated based on the changes in the molecular structure and atomic charge distribution of the triazole ring. Several relationships were obtained that could facilitate the selection of the substituents on the triazole ring for their further synthesis. The observed IR and Raman bands in the solid state of two of these compounds were accurately assigned according to the functional calculations on the monomer and dimer forms, together with the polynomic scaling equation procedure (PSE).

Post-quantum public cryptosystems introduced so far do not define an scalable public key infrastructure for the quantum era. We demonstrate here a public certification system based in Lizama’s non-invertible Key Exchange Protocol which can be used to implement a public key infrastructure (PKI), secure, scalable, interoperable and efficient. We show functionality of certificates across different certification domains. Finally, we discuss that non-invertible certificates can exhibit Perfect Forward Secrecy (PFS).

We introduce a new integral method for Quantum Key Distribution to perform sifting, reconciliation and amplification processes to establish a cryptographic key through the use of binary structures called frames which are capable to increase quadratically the secret key rate. The method can be implemented with the usual optical Bennett-Brassard (BB84) equipment allowing strong pulses in the quantum regime.

Inflammatory bowel diseases (IBD) represent a growing public health concern due to increasing incidence worldwide. The current notion on the pathogenesis of IBD is that genetically susceptible individuals develop intolerance to dysregulated gut microflora (dysbiosis) and chronic inflammation develops as a result of environmental triggers. Among the environmental factors associated to IBD, diet plays an important role in modulating the gut microbiome, influencing epigenetic changes and, therefore, could be applied as a therapeutic tool to improve the disease course. Nevertheless, the current dietary recommendations for disease prevention and management are scarce and of weak evidence. This review summarizes the current knowledge on the complex interactions among diet, microbiome and epigenetics in IBD. Whereas over-abundance of calories and some macronutrients increases gut inflammation, several micronutrients have the potential to modulate it. Immunonutrition has emerged as a new concept putting forward the importance of vitamins such as vitamins A, C, E, D, folic acid and beta-carotene and trace elements such as zinc, selenium, manganese and iron. However, when assessed in clinical trials, specific micronutrients exerted a limited benefit. Beyond nutrients, anti-inflammatory dietary patterns as a complex intervention approach have become popular over the recent years. Hence, exclusive enteral nutrition in pediatric Crohn’s disease is the only nutritional intervention currently recommended as a first-line therapy. Other nutritional interventions or specific diets including the Specific Carbohydrate Diet, the low fermentable oligosaccharides, disaccharides, monosaccharides, and polyol diet and most recently the Mediterranean diet have shown strong anti-inflammatory properties and provide a promise for improving disease symptoms. Definitely, more work is required to evaluate the role of individual food compounds and complex nutritional interventions with potential to decrease inflammation as means for prevention and management of IBD.

Taxes on the consumption of certain products have played a key role in public revenue analysis in European countries. This work aims to assess the differences in tax planning on new non-combustion products across some European territories. Through theoretical analysis, the paper has three distinct aspects. Firstly, we show the taxpayer profile in different countries. Secondly, the study analyzes the risks for the health system and the individual. Thirdly, the design of the land tax is based on previous experience and planning in Europe. This paper concludes with a case study for different countries: 1) Spain “vapers” and “smokers”, where the analysis is based on micro-data from the European Health Interview Survey 2020. 2) Sweden with the analysis of snus, shows it as a practice to reach economic savings while decreasing economic costs thanks to the nudging of consumers towards better products. The results show taxation and, specially, land taxation, should consider differences in planning in the case of new products, such as the non-combustion products, given the user per capita income and the potential lower health risks involved.

Breast cancer (BC) is a heterogeneous disease representing a substantial economic burden. In order to develop policies that successfully decrease this burden, the factors affecting costs need to be fully understood. Evidence suggests that early detection in Stage I has a lower cost than late detection. We aim to provide conservative estimates of BC's stage-wise medical costs from German healthcare and the payer's perspective. To this end, we conducted a literature review of articles evaluating stage-wise costs of BC in Germany through PubMed, Web of Science, and Econ Lit databases supplemented by Google Scholar. We developed a decision tree model to estimate BC related medical costs in Germany using available treatment and cost information. The review generated seven studies; none estimated the stage-wise costs of BC. The studies were classified into two groups: (1) case scenarios (five studies) and two studies based on administrative data. The first sickness funds data study (Gruber, Stock, et al. 2012) used 1999 information to approach BC attributable cost; their results suggest a range between €3,929 and €11,787 depending on age. The second study (Kreis, Plöthner, et al. 2020) used 2011-2014 data and suggested an initial phase incremental cost of €21,499, an intermediate phase cost of €2,620, and a terminal phase cost of €34,513 per incident case. Our decision tree model based BC stage-wise cost estimates were €21,523 for Stage I, €25,679 for Stage II, €30,156 for Stage III, €42,086 for Stage IV. Alternatively, the modeled cost estimates are €20,284 for the initial phase of care, €851 for the intermediate phase of care, and €34,963 for the terminal phase of care. Our estimates for phases of care are consistent with recent German estimates provided by Kreis and Plöthner et al. Furthermore, the data collected by sickness funds are collected primarily for reimbursement purposes, where the German ICD-10 classification system defines a cancer diagnosis. As a result, claims data lack the clinical information necessary to understand stage-wise BC costs. Our model-based estimates fill the gap and inform future economic evaluations of BC interventions.

With the Sendai Framework (2015-2030) and the Paris Agreement (2015), the UN has been promoting at a global level, the priority objectives to protect the life and well-being of people, these documents of global consensus have scheduled in several countries, an extensive list of actions of responsibilities and commitments to the environment, to address natural disasters among those of greatest impact earthquakes and floods and among earthquakes (seismic activity). The materialization of the disaster is a natural or human-induced event, it manifests itself in permanent changes in society and by its origin it is classified as natural, anthropogenic (anthropogenic) and mixed, creating a worldwide problematic situation of immediate reaction. The attention and alert in the scientific community have been adding efforts, but in a disorganized way, with limited human and material resources and with globalized strategies still to be improved. The literature review of disaster risk management due to seismic activity, from 2008 to 2023, allows us to have updated information to identify the factors and deepen them, with the understanding, comprehension, and multidisciplinary knowledge. The selected researches that mention the factors (elements) that influence risk management of natural disasters due to seismic activity (RMNDDSA) allow us to know the advances and spaces to approach them, which constitutes the motivation to study the twenty-four (24) factors present in this type of disasters. The selected research articles indicate important advances that associate disaster risk management (DRM) and communication technology (ICTs). The technological means mentioned are well received and accepted by society, capable of detecting and communicating in real time seismic activity worldwide, with the help of social mobile networks, technological platforms, Twitter, Facebook, and others.

We introduce a novel key exchange protocol based on non-commutative matrix multiplication defined in $\mathbb{F}_p^{n \times n}$. The security of our method does not rely on computational problems as integer factorization or discrete logarithm whose difficulty is conjectured. We show that the public, secret and channel keys become indistinguishable to the eavesdropper under matrix multiplication. Remarkably, for achieving a 512-bit security level, the public key is 1024 bits and the private key is 768 bits, making them the smallest keys among post-quantum key exchange algorithms. Also, we discuss how to achieve key authentication, interdomain certification and Perfect Forward Secrecy (PFS). Therefore, Lizama's algorithm becomes a promising candidate to establish shared keys and secret communication between (IoT) devices in the quantum era.

We present an error reconciliation method for Quantum Key Distribution (QKD) that corrects 100% of errors generated in regular binary frames transmitted over a noisy quantum channel regardless of the quantum channel error rate. In a previous investigation, we introduced a novel distillation QKD algorithm whose secret key rate descends linearly with respect to the channel error rate. Now, as the main achievement of this work, we demonstrate an improved algorithm capable of retaining almost all the secret information enclosed in the regular binary frames. Remarkably, this technique increases quadratically the secret key rate as a function of the double matching detection events and doubly quadratically in the number of the quantum pulses. Furthermore, this reconciliation method opens up the opportunity to use less attenuated quantum pulses, would allow greater QKD distances at drastically increased secret key rate. Since our method can be implemented as a software update, we hope that quantum key distribution technology would be fast deployed over global data networks in the quantum era.

We introduce a novel key exchange protocol based on non-commutative matrix multiplication defined in $\mathbb{Z}_p^{n \times n}$. The security of our method does not rely on computational problems as integer factorization or discrete logarithm whose difficulty is conjectured. We claim that the unique eavesdropper's opportunity to get the secret/private key is by means of an exhaustive search which is equivalent to the unsorted database search problem. Furthermore, we show that the secret/private keys become indistinguishable to the eavesdropper. Remarkably, to achieve a 512-bit security level, the keys (public/private) are of the same size when matrix multiplication is done over a reduced 8-bit size modulo. Also, we discuss how to achieve key certification and Perfect Forward Secrecy (PFS). Therefore, Lizama's algorithm becomes a promising candidate to establish shared keys and secret communication between (IoT) devices in the quantum era.

Gestational diabetes mellitus (GDM) triggers alterations in the maternal gut microbiome. Alongside metabolic shifts, microbial products may impact clinical factors and influence pregnancy outcomes. Here, we performed two separate analyses to integrate the maternal microbiome-metabolomic differences from a subset of the “Choosing Healthy Options in Carbohydrate Energy” (CHOICE) study. Women diagnosed with GDM were randomized to a diet higher in complex carbohydrates (CHOICE, n=18, 60% complex carbohydrate/25% fat/15% protein) or a conventional GDM diet (CONV, n=16, 40% carbohydrate/45% fat/15% protein). All meals were provided, diets were eucaloric, and fiber content was similar. CHOICE diet was associated with increases in TMAO, lysophosphotidylcholines, indoxyl sulfate, and several triglyceride (TG) species, while CONV diet was associated with higher plasma hippuric acid, aspartic acid, betaine, glutamic acid, indole propionic acid, and indoleacetic acid, suggesting that differences in lipid metabolism and tryptophan utilization pathways are linked to specific maternal diets. We also identified two latent metabolic groups not associated with either diet treatment: one metabolome associated with higher fasting glucose, and the other associated with higher fasting TGs after 7 weeks on either diet. Our study underscores the importance of utilizing dietary approaches to optimize maternal-fetal health outcomes in GDM treatment.

Recently, coastal swamps have been acknowledged for their capability to alleviate shorelines and defend coastal communities. Mangroves play a prominent role in obstructing water currents in riverbanks, shorelines, and coastal areas. Mangrove roots have the significant contribution to the resiliency of the vegetation structure. Yet, mangrove model has lately been called into question by lab experimental evidence. In this paper, the flow characteristics past root models are reviewed. coastal swamps are among the most fruitful and carbon‐rich ecosystems on the planet. Long‐term carbon putting away in coastal wetlands happens mostly below ground as soil organic matter. Mangrove servs as a carbon sink, impacts wetland ecosystem configuration, purpose, and firmness. To expect and ease the properties of climate change, there is a necessity to advance considerate of environmental controls on wetland. The impact of four soil formation factors are reviewed. Across the shorelines, soil organic matter was highest in mangrove forests and it was lower areas.

The escalating environmental challenges that stem from urban residential waste in densely populated areas have become increasingly prominent in recent times. As a result, the waste management sector has experienced significant growth nationwide. However, due to the predominantly manual nature of these processes, their effectiveness falls short of meeting the current demand. Addressing these issues requires process enhancement. In this context, Industry 4.0, particularly the concept of Digital Twins, emerges as a potential avenue for refining processes. To tackle both current and future industry challenges, it is imperative to create a comprehensive methodology capable of generating effective solutions within the waste management sector. This paper provides an explanation of digital twins, outlines the methodological framework comprising an architectural structure and layered model, and details a series of sequential methodical stages for implementing digital twins based on the specific scope determined by the end-user. A noteworthy aspect is the transformative potential of digital twins in enhancing efficiency and precision within waste management practices. By providing a virtual real-time representation of the waste management system, digital twins empower simulations and experimentation to fine-tune processes. Furthermore, they facilitate informed decision-making by offering a detailed visualization of the complete system, simplifying the identification of challenges and opportunities for improvement. that this article derives from the presentation titled "Digital Twin application methodology for the improvement of production and service systems. Application to waste management processes" at the "Sustainable Smart Cities and Territories International Conference" held in the city of Manizales, Colombia, from 21st to 23rd June 2023.

In this work a new method is proposed to tackle down the multiple objective optimization problem of the calculation of cation distribution in spinels structure, through the difference of intensity ratios between experimental and calculated intensities of cation sensitive Bragg planes, by introducing a new factor, Rabs, in Bertaut method. This factor is introduced as the sum of absolute R factors, and it is minimized by varying cation distribution. To test this method aluminate manganese spinel where synthesized though modified Pechini method and characterized though XRD. The results show to be in agreement with literature for the aluminum inversion in tetrahedral sites, which is near to the reported value of 10%. Also, it was noticed that the manganese atoms are present in octahedral sites with a mixed valence state of +2 and +3. Which might be an indicator that oxygen vacancies are present in the structure, so the vacancies value of oxygen is proposed considering the total charge of cations and thus proposing the value of 3.678 mol per formula unit of the spinel, thus having the next stoichiometry considering normalized Al and Mn, MnAl2O3.678. Finally, the last cation distribution proposed was [Mn0.867^(+2) Al0.129^(+3) ][Mn0.034^(+2) Mn0.098^(+3) Al1.871^(+3) ] O3.678 with a Rabs factor value of 0.6466, which considers the cation distribution and oxygen vacancies.

Maternal obesity is increasingly prevalent and is associated with elevated morbidity and mortality rates in both mothers and children. As the interface between the mother and fetus, the placenta has mediates the impact of the maternal environment on fetal development. Most of the literature data on the effects of maternal obesity on placental functions do not exclude potential confounding factors like metabolic diseases (e.g. gestational diabetes). Moreover, it is now clear that the placental response to maternal environment depends on the fetal sex. In this context, we reviewed how maternal obesity (in the absence of gestational diabetes) affects the human placenta in terms of (i) endocrine function, (ii) morphological characteristics, (iii) nutrient exchanges and metabolism, (iv) inflammatory/immune status, (v) oxidative stress, and (vi) transcriptome, with a focus on fetal sex specificities. A better understanding of sex-specific placental responses to maternal obesity is crucial for improving pregnancy outcomes and the health of mothers and children.

A developed six-port reflectometry (SPR) system was integrated to measure the relative permittivity of tumor and normal breast tissue for medical diagnostic purpose. In order to obtain an accurate and precise measurement, the calibration process was done to the SPR using the well-known three-standard technique. Next, the studied dielectric probe was connected to the calibrated measurement-port of the SPR. The open end of the probe aperture was dibbed into the normal and tumor synthetic breast tissue samples to measure the synthetic breast tissues dielectric constant, ɛrʹ, and loss factor, ɛrʺ in the frequency range of 1.5 GHz to 3.3 GHz. Finally, the comparative studies were conducted between commercial VNA with Keysight 85070E dielectric probe and the studied SPR-probe system based on the measured magnitude of the reflection coefficient, phase shift, dielectric constant, and loss factor of the synthetic breast samples. The maximum absolute errors of the measured reflection coefficient magnitude, phase shift, dielectric constant, and loss factor were found to be 0.01, 1.07°, 1.12, and 0.75, respectively. It was ascertained that the predicted dielectric constant, ɛrʹ, is able to differentiate between normal, (ɛrʹ < 50) and tumor, (ɛrʹ > 50) breast tissues.

Pomegranate extract (PG-E) has been reported to exert a protective effect in skin due to its antioxidant activity. Ingredients rich in phenolic compounds are unstable in extract solutions and, therefore, the use of a suitable nanosystem to encapsulate this type of extract could be necessary in different biotechnological applications. Thus, we investigated the capacity of Brassica oleracea L. (cauliflower) inflorescence vesicles (CI-vesicles) to encapsulate PG-E and determined the stability and the antioxidant capacity of the system over time. In addition, the protective effect against UV radiation and heavy metals in HaCaT cells was also tested. The CI-vesicles had an entrapment efficiency around 50% and accelerated stability tests did not show significant changes in the parameters tested. The results for the HaCaT cells show the non-cytotoxicity of the CI-vesicles containing PG-E and their protection against heavy metals (lead acetate and mercuric chloride) and UV-B radiation through a reduction of oxidative stress. The reduction of the percentage of deleted mtDNA (mtDNA4977, “common deletion”) in UV-treated HaCaT cells due to the presence of CI-vesicles containing PG-E indicates the mechanism of protection. Therefore, the effects of CI-vesicles loaded with PG-E against oxidative stress support their utilization as natural cosmeceuticals to protect skin health against external damage from environmental pollution and UV radiation.

Background: The clinical outcomes of antiretroviral drugs may be modified by drug interactions; thus, it is important to update the drug interactions in people living with HIV. Aim: To update clinically relevant drug interactions in people living with HIV on antiretroviral therapy. Methods: A systematic review in Medline/PubMed database from July 2017 to December 2022, using the Mesh terms: Anti-retroviral agents and drug interactions or herb-drug interactions or food-drug interactions. Publications with drug interactions in humans, in English or Spanish, and with full text were retrieved. The clinical relevance of drug interaction was grouped into 5 levels according to gravity and probability of occurrence. Results: 361 articles were identified and 148 were included, which allowed the identification of 894 drug interaction pairs. Among these 894 drug pairs, 355 have not been identified previously; and 89 (25.1%) and 72 (20.2%) were of levels 1 and 2, respectively. In addition, for 197 (55.5%) pairs the mechanism was pharmacokinetic. The non-nucleoside reverse transcriptase inhibitors (NNRTIs) and the protease inhibitors (PIs) with 91 (25.6%) and 76 (21.4%) pairs, respectively were more frequent. Conclusions: In people living with HIV on antiretroviral therapy, we identify 355 new drug interaction pairs, of them 161 (45.3%) are assessed as levels 1 and 2 and thus, clinically relevant; a figure that is lower compared to 2014-2107 update. The pharmacokinetic mechanism is the most frequently identified. The non-nucleoside reverse transcriptase inhibitors (NNRTIs) and the protease inhibitors (PIs) are the antiretroviral groups with the highest number of clinically relevant drug interactions.

Abiotic stress in plants is an increasingly common problem in agriculture, and thus, studies on plant treatments with specific certain compounds that may help to mitigate these effects have increased in recent years Melatonin (MET) application and its role in mitigating the negative effects of abiotic stress in plants have become important in the last few years. MET, a derivative of tryptophan, is an important plant-related response molecule involved in the growth, development, and reproduction of plants, and the induction of different stress factors. In addition, MET plays a protective role against different abiotic stresses such as salinity, high/low temperature, high light, waterlogging, nutrient deficiency and stress combination by regulating both the enzymatic and non-enzymatic antioxidant defense systems. Also, MET interacts with many signaling molecules, among these, reactive oxygen species (ROS) and nitric oxide (NO), and participates in a wide variety of physiological reactions. It is well known that NO produces S-nitrosylation and NO2-Tyr of important antioxidant-related proteins, being this an important mechanism for maintaining the antioxidant capacity of the AsA/GSH cycle under nitro-oxidative conditions, being extensively reviewed here under different abiotic stress conditions. Lastly, in this review, we show the coordination between NO and MET as a long-range signaling molecule, regulating many responses in plants, including plant growth and abiotic stress tolerance. Despite all the knowledge acquired over the years, there is still more to know about how MET and NO act on tolerance to abiotic stresses.

The positional cloning of single nucleotide polymorphisms (SNPs) of the neutrophil cytosolic factor 1 (Ncf1) gene, advocating that a low oxidative burst drives autoimmune disease, demands an understanding of the underlying molecular causes. A cellular target could be T cells, which have been shown to be regulated by reactive oxygen species (ROS). However, the pathways by which ROS mediate T cell signaling remain unclear. The adaptor molecule linker for activation of T cells (LAT) is essential for coupling T cell receptor-mediated antigen recognition to downstream responses, and it contains several cysteine residues that have previously been suggested to be involved in redox regulation. To address the possibility that ROS regulate T cell-dependent inflammation through LAT, we established a mouse strain with cysteine-to-serine mutations at positions 120 and 172 (LATSS). We found that redox regulation of LAT through C120 and C172 mediate its localization and phosphorylation. LATSS mice had reduced numbers of double-positive thymocytes and naïve peripheral T cells. Importantly, redox insensitivity of LAT enhanced T cell-dependent autoimmune inflammation in collagen-induced arthritis (CIA), a mouse model of rheumatoid arthritis (RA). This effect was reversed on an NCF1-mutated (NCF1m1j), ROS-deficient, background. Overall, our data shows that LAT is redox-regulated, acts to repress T cell activation, and is targeted by ROS induced by NCF1 in antigen-presenting cells (APCs).

The cancer stem cell hypothesis suggests that neoplastic cells with stem characteristics hierarchically regulate tumor generation and its high cellular heterogeneity. These cells have been detected in all cancer types, and specific signaling pathways give the regulation of self-renewal and differentiation. In prostate cancer, androgen receptor signaling has been extensively studied, and in non-stem cells, it promotes cell proliferation and tumor progression, but in the cancer stem cell population, it negatively regulates processes such as self-renewal. However, in other types of cancer, such as breast and glioblastoma, the androgen receptor seems to favor the maintenance of cancer stem cells, suggesting that androgen signaling has different effects depending on the tumor context. This review discusses the role of androgen receptor in maintaining cancer stem cells by regulating proliferation, self-renewal, and differentiation, as well as the possible signaling pathways involved in these processes.

Background: White matter hyperintensities (WMH), of presumed vascular origin, are visible and quantifiable neuroradiological markers of brain parenchymal change. These changes may range from damage secondary to inflammation and other neurological conditions, through to healthy ageing. Fully automatic WMH quantification methods are promising, but still, traditional semi-automatic methods seem to be preferred in clinical research. We systematically reviewed the literature for fully automatic methods developed in the last five years, to assess what are considered state-of-the-art techniques, as well as trends in the analysis of WMH of presumed vascular origin. Method: We registered the systematic review protocol with the International Prospective Register of Systematic Reviews (PROSPERO), registration number - CRD42019132200. We conducted the search for fully automatic methods developed from 2015 to July 2020 on Medline, Science direct, IEE Explore, and Web of Science. We assessed risk of bias and applicability of the studies using QUADAS 2. Results: The search yielded 2327 papers after removing 104 duplicates. After screening titles, abstracts and full text, 37 were selected for detailed analysis. Of these, 16 proposed a supervised segmentation method, 10 proposed an unsupervised segmentation method, and 11 proposed a deep learning segmentation method. Average DSC values ranged from 0.538 to 0.91, being the highest value obtained from an unsupervised segmentation method. Only four studies validated their method in longitudinal samples, and eight performed an additional validation using clinical parameters. Only 8/37 studies made available their method in public repositories. Conclusions: We found no evidence that favours deep learning methods over the more established k-NN, linear regression and unsupervised methods in this task. Data and code availability, bias in study design and ground truth generation influence the wider validation and applicability of these methods in clinical research.

Arsenic is highly toxic, affecting millions of people in many regions of the world. That is why developing economic and efficient technologies is imperative to eliminate it. Sorption techniques are attractive as efficient and inexpensive sorbents can be used. Chitosan is an abundant, naturally occurring, biodegradable, low-cost biopolymer that can be combined with metal oxide to enhance its removability. This work aimed to synthesize a new chitosan-magnetite-based sorbent for arsenic removal. The synthesized sorbent does not present pores, and by FT-IR, functional groups of the chitosan and the presence of As(V) in the sorbent treated with arsenic were identified. The synthesized magnetite was characterized by XRD spectroscopy. Application of the Composite Central Design model showed that 0.22 g of the sorbent at pH 6.0 could remove 27.6% of As(V). Kinetic data, fitted with the pseudo-first and second-order models, indicated an ion exchange sorption and activation energy of 28.1-31.4 kJ mol-1. The isotherms were fitted with the Langmuir model, indicating a favourable monolayer adsorption with high affinity. The sorption energy, calculated by Dubinin-Radushkevich, 9.60-8.80 kJ mol-1, confirms a sorption mechanism mediated by ion exchange. The thermodynamic parameters of the process were ΔG°(-21.7/-19.7 kJ mol-1), ΔH°(16.7 kJ mol-1) and ΔS°(123.3 J mol-1 K-1).

A whole-exome capture and next-generation sequencing applied to an 11 y/o patient with a clinical history of congenital hypotonia, generalized motor and cognitive neurodevelopmental delay, severe cognitive deficit, without any identifiable Syndromic pattern, and to her parents, disclosed a de novo heterozygous pathogenic mutation, c.697_699del p.Phe233del (rs786204835)(ACMG classification PS2, PM1, PM2, PP5), harbored in the PURA gene (MIM*600473) (5q31.3), associated to Autosomal Dominant Mental Retardation 31 (MIM # 616158). We used the significant improvement in the accuracy of protein structure prediction recently implemented in AlphaFold that incorporates novel neural network architectures and training procedures based on the evolutionary, physical, and geometric constraints of protein structures. The wild-type (WT) sequence and the mutated one, missing the Phe233, were reconstructed. The predicted local Distance Difference Test (lDDT) for the PURA WT and the PURA-Phe233del showed that the occurrence of the Phe233del affects between 220-320 amino acids. The distortion in the PURA structural confor-mation in the ~5Å surrounding area after the p.Phe233del produces a conspicuous disruption of the repeat III, where the DNA and RNA helix unwinding capability occurs. PURA Protein-DNA Docking corroborated these results in silico Analysis that showed a loss of the contact of the PURA-Phe233del III repeat domain model with the DNA. Together, i) the energetic and stereochemical, ii) the hydropathic indices and polarity surfaces, and iii) the hybrid Quantum Mechanics-Molecular Mechanics (QM-MM) analyses of the PURA molecular models demarcate at the atomic resolution the specific surrounding region affected by these mutations and paves the way for future cell-based functional analysis. To the best of our knowledge, this is the first report of a de novo mutation underpinning a PURA syndrome in a Latin American patient and highlights the importance of predicting the molecular effects in protein structure using artificial intelligence algorithms and molecular and atomic resolution stereochemical analyses.

The energy sector plays an important role in Mexico’s development trajectory. Mexico makes an interesting case study, because it shows how difficult it is to reduce fossil energy dependence despite geographic and climatic conditions that favour renewable energy deployment and use. Resolving path dependencies and the related carbon lock-in are key to Mexico’s sustainable energy transition. This case study aims to identify and discuss how carbon lock-in affects Mexico’s sustainable energy transition. Mexico’s carbon lock-in involves oil and oil-run power plants that are costly to build but relatively inexpensive to operate. This case study identifies potential entry points for transitioning towards sustainable energy in Mexico – resources that can promote the use of clean energy despite carbon lock-in. For example, focusing on electrification – particularly of the carbon-intensive sectors – can help Mexico transit towards sustainable energy despite institutional constraints. Complementing this case study is a teaching guide with recommendations for using Mexico’s energy transition in courses on sustainability. It introduces a “learning activation framework” to identify emerging opportunities that can advance sustainable energy transitions in different cases of carbon lock-in. Finally, the framework also gives students a chance to help dismantle or cope with carbon lock-ins.

The 1,2,3-triazole derivative 2-(4-chlorophenyl)-5-(pyrrolidin-1-yl)-2H-1,2,3-triazole-4-carboxylic acid with potential anticancer activity was used as a ligand in complex formation with the lan-thanum(III) ion. The molecular structure and vibrational spectra of the complex were optimized at three DFT levels and the scaled IR and Raman spectra were compared to the experimental ones. Several scaling procedures were used. Through a detailed analysis, the structure predicted for the newly synthetized La(III) complex was confirmed by the good accordance of the calculat-ed-experimental IR and Raman spectra. The best DFT method appears to be M06-2X with the Lanl2mb basis set, followed closely by Lanl2dz. The effect of the lanthanide atom on the molecular structure and atomic charge distribution of the triazole ring was evaluated. Potential free radical scavenging activity of both, ligand and complex, was investigated in several radical-generating model systems. Potential mechanisms of antioxidant action (hydrogen atom transfer – HAT and single electron transfer - SET) were elucidated.

Indonesia is an interesting case study for students of sustainable development and sustainable energy due to its ability to connect the multiple “worlds” it has become part of. Indonesia is an important bridge to Muslim countries, the voice of the Global South in the G20 and a main pillar of the 134-country-strong G77. Indonesia’s development trajectory is also key to the achievement of the Paris Climate Agreement as well as of the 2030 Agenda. Students can learn from how Indo-nesia address contradictions that would have been unsurmountable for other countries. Indone-sia’s energy transition offers helpful lessons, because of its aspiration to become a developed country by 2045. This goal is only possible when a country is able to effectively address barriers and caveats to sustainable energy. It is interesting how Indonesia focuses on silver linings and come up with pragmatic solutions to energy-related issues. This is followed by the “teaching guide,” which provides recommendations how the lessons from Indonesia can be embedded into a learning experience. The “learning activation approach” is introduced, which encourages stu-dents to systematically reflect on the complexity of selected contexts and understand this com-plexity by looking at the technical issues and processes that allow decision-making.

We present a new post-processing method for Quantum Key Distribution (QKD) that raise cubically the secret key rate in the number of double matching detection events. In Shannon’s communication model information is prepared at Alice’s side then it is intended to pass it over a noisy channel. In our approach, secret bits do not rely in Alice’s transmitted quantum bits but in Bob’s basis measurement choices. Therefore measured bits are publicly revealed while bases selections remain secret. Our method implements sifting, reconciliation and amplification in a unique process, it just require a round iteration, no redundancy bits are sent and there is no limit in the correctable error percentage. Moreover, this method can be implemented as a post processing software into QKD technologies already in use.

The widespread integration and growing dependence among currency, stock and commodity markets make these markets often very vulnerable to shocks and at risk of collapse at the same time. As a result, these trends threaten the sustainability of the entire financial system. In this study, we explore the spillovers and nonlinear dependences between the seven major foreign ex-change rates, crude oil and gold prices, a global stock price index, and oil and stock implied volatility indices as proxy variables for global risk factors by em-ploying directional spillover network approach. We also use multi-scale de-composition method and nonlinear causality test between these variables to capture multi-level relationships at short and long horizons. Major findings are summarized as follows. First, from the multi-scale decomposition analysis, we identify that Granger causality test results and the direction and strength of return spillovers change with the level of decomposition. Second, the results of nonlinear causality tests show variation in both the significance and direction of Granger causality relationships between the decomposed currency and other series at different timescales, especially for the decomposed oil, gold, and OVX series. Third, the measured directional spillover indices identify the EUR as the largest contributor of connectedness to the other series. The central role of the EUR is a net transmitter of connectedness to gold, oil, the GBP, JPY, and CHF.

Due to their contribution to human health, the production of healthy snacks has garnered the attention of both the scientific community and the food industry. This study was conducted to determine the suitability of frying and baking processing methods for producing green banana chips using two varieties: Barraganete and Dominico. The aim was to identify a treatment geared towards producing healthy snacks. Initially, the physicochemical properties of the raw materials were analyzed, revealing significant differences in starch, fat, fiber, and protein content. Subsequently, the bananas were processed into baked and fried chips. Multivariate statistical techniques such as ANCOVA, MANOVA, and post-hoc tests were applied to examine the influence of initial characteristics and detect variations attributable to the cooking method. The main findings showed that the initial protein level had a significant covariate effect on the final content in the chips. The Dominico variety generally proved more suitable for making baked chips, retaining higher percentages of protein, starch, fiber, and lower fat content than Barraganete. Baked chips showed significantly lower sodium and fat values than fried ones when differentiated by processing method. The "Dominico + Baked" treatment emerged as the superior alternative, with favourable levels of protein, starch, and low sodium and fat, positioning it as the most suitable for producing a healthy snack.

An adequate representation of the water infiltration process in the soil allows improving the efficiency in application and the uniformity in surface irrigation. The Green and Ampt model has shown a good representation of the process, and researchers from the United States Department of Agriculture (USDA) determined the values of their parameters for soils of that country, which are shown in tables or through functional relationships and this information is used as reference in several parts of the world, although there is no certainty that they are representative of the soils in Mexico. In this study, the parameters of the Green & Ampt equation were determined and evaluated in some soils of agricultural importance in Mexico. The parameters were obtained in four ways: one of them applied a methodology adapted from Brooks and Corey to quantify the wetting front capillary pressure head and used an permeameter under constant hydraulic head to determine the saturated hydraulic conductivity, and the other three consisted in taking them from three studies reported by the USDA. The values of the parameters suggested in Mexico drastically underestimated the results with relative errors (RE) in a range of -49.0 to -94.0% and the most representative were those obtained with the methodology proposed in this research with RE of -15.0 to 6.0%.

The market for autonomous vehicles (AV) is expected to experience significant growth over the coming decades and to revolutionize the future of transportation and mobility. The AV is a vehicle that is capable of perceiving its environment and perform driving tasks safely and efficiently with little or no human intervention and is anticipated to eventually replace conventional vehicles. Self-driving vehicles employ various sensors to sense and perceive their surroundings and, also rely on advances in 5G communication technology to achieve this objective. Sensors are fundamental to the perception of surroundings and the development of sensor technologies associated with AVs has advanced at a significant pace in recent years. Despite remarkable advancements, sensors can still fail to operate as required, due to for example, hardware defects, noise and environment conditions. Hence, it is not desirable to rely on a single sensor for any autonomous driving task. The practical approaches shown in recent research is to incorporate multiple, complementary sensors to overcome the shortcomings of individual sensors operating independently. This article reviews the technical performance and capabilities of sensors applicable to autonomous vehicles, mainly focusing on vision cameras, LiDAR and Radar sensors. The review also considers the compatibility of sensors with various software systems enabling the multi-sensor fusion approach for obstacle detection. This review article concludes by highlighting some of the challenges and possible future research directions.

The Industrial Internet of Things (IIoT) is bringing evolution with remote monitoring, intelligent analytics, and control of industrial processes. A reference architecture provides the general layout information for the flexible integration of IIoT systems; however, as the industrial world is currently in its initial stage of adopting the full-stack development solutions with IIoT, some challenges need to be addressed. To cope with the rising challenges and provide the blueprint guidelines to develop and implement IIoT in real-time, researchers around the globe have proposed IIoT architectures based on different architectural layers and emerging technologies. In this paper, we first review and compare some widely accepted IIoT reference architectures and present a state-of-the-art review of conceptual and experimental IIoT architectures in literature. We highlight scalability, interoperability, security, privacy, reliability, and low latency as the main IIoT architectural requirements and compare how the current architectures address these challenges. We also highlight the role of emerging technologies in current IIoT architectures to address these requirements and present the literature gap for future research work to address the challenges.

Previously, using the conjugate frame-based reconciliation approach, we defined a method to correct errors produced in pairs of non-orthogonal quantum states that are transmitted through a quantum key distribution (QKD) link. The security of the frame-based reconciliation was discussed in order to deal with Photon Number Division (PNS) attack and Intercept and Forward (IR) attack, among others. However, until the time of publication we did not have the distillation software to test our method. In this article, following the conjugate frame distillation method, we present the implementation of the post-processing system that demonstrates that it is capable of correcting errors in the presence of error rates close to unity. The system shows that when the number of double-sensing events at Bob's station is as low as 100, the number of secret bits stays above 4500 bits in about 12 seconds, giving a secret rate of 375 bits per second while that the channel error rate reaches 90\%.

Under the “Korean emission trading system in the forestry sector (KETSF)” initiative, the South Korean government has developed several greenhouse gas (GHG) emissions reduction programs that include forestry activities as the cornerstones of the initiative. Forest management is deemed to be a major strategy to implement KETSF; this has been confirmed by most participants in the program, who have shown their preference for forest management projects as the most effective and encouraging strategy to participate in the KETSF program. For a successful implementation of KETSF projects is essential to explore methods that optimize the positive impacts of such strategies, thereby maximizing the economic returns and carbon stocks that result from the implementation of forest management activities. Thus, this study investigated several value-added KETSF projects in South Korea, which included simulated scenarios under two main forest management strategies: one based on an extension of the rotation age, and a second one based on reforestation with new species. Five forest management scenarios were examined and evaluated in their ability to maximize carbon stocks and economic returns. Based on the results, Scenarios 2 and 4 were identified as the best KETSF projects in terms of carbon stock increments. Additionally, the results indicated that projects including reforestation with new species added more economic value than projects that considered an extension of the rotation age. The study also revealed that KETSF projects generated revenue in both scenarios, by either extending the rotation age or by implementing reforestation with new species.

A mathematical model, composed of two non-linear differential equations that describe the population dynamics of CD4 T cells in the human immune system, as well as viral HIV particles, is proposed. The invariance region is determined, classical equilibria stability analysis is performed using the basic reproduction number, and numerical simulations are carried out, in order to illustrate stability results. Later, the model is modified with a delay term, which describes the time that cells require for immunological activation. This generates a two-dimensional integro-differential system, which is transformed into a system with three ordinary differential equations, via auxiliary variable use. For the new model, equilibrium points are determined, their local stability is examined, and results are studied by way of numerical simulation.

In recent years, online social media information has been subject of study in several data science fields due to its impact on users as a communication and expression channel. Data~gathered from online platforms such as Twitter has the potential to facilitate research over social phenomena based on sentiment analysis, which usually employs Natural Language Processing and Machine Learning techniques to interpret sentimental tendencies related to users opinions and make predictions about real events. Cyber attacks are not isolated from opinion subjectivity on online social networks. Various security attacks are performed by hacker activists motivated by reactions from polemic social events. In this paper, a methodology for tracking social data that can trigger cyber attacks is developed. Our main contribution lies in the monthly prediction of tweets with content related to security attacks and the incidents detected based on ℓ1 regularization.

Pygoscelis penguin populations in the Antarctic Peninsula have dropped dramatically in the last 50 years. The main probable cause is the reduction in Krill (Euphausia superba), the most important feeding item for Pygoscelis penguins during breeding. The scientific community has expressed concerns on the potential that competition with the fishery during periods of low krill availability might be exacerbating the effects of climate change. By bringing together data on breeding success of penguin colonies throughout the Antarctic Peninsula with information of krill availability from acoustic survey and krill fishery monitoring data, we were able to show that fishery has had in the past an effect over breeding success. That is a consequence of a management strategy based on a constant catch level enabling the fishery to maintain the same levels of production even when krill availability is low. The total catch limit may have represented a substantial amount of the available krill biomass in some years, and we detected that when the catch goes over 5% of the available biomass during summer, breeding success of penguins decreased by one third. We discuss the implications of our findings to the revised ecosystem-based management strategy of the krill fishery in Antarctica.

Pipeline integrity is an important area of concern for the oil and gas, refining, chemical, hydrogen, carbon sequestration, and electric-power industries, due to the safety risks associated with pipeline failures. Regular monitoring, inspection, and maintenance of these facilities is therefore required for safe operation. Large standoff magnetometry (LSM) is a non-intrusive, passive magnetometer-based mea- surement technology that has shown promise in detecting defects (anomalies) in regions of elevated mechanical stresses. However, analyzing the noisy multi-sensor LSM data to clearly identify regions of anomalies is a significant challenge. This is mainly due to the high frequency of the data collection, mis-alignment between consecutive inspections and sensors, as well as the number of sensor measurements recorded. In this paper we present LSM defect identification approach based on ma- chine learning (ML). We show that this ML approach is able to successfully detect anomalous readings using a series of methods with increasing model complexity and capacity. The methods start from unsupervised learning with "point" methods and eventually increase complexity to supervised learning with sequence methods and multi-output predictions. We observe data leakage issues for some methods with randomized train/test splitting and resolve them by specific non-randomized splitting of training and validation data. We also achieve a 200x acceleration of support-vector classifier (SVC) method by porting computations from CPU to GPU leveraging the cuML RAPIDS AI library. For sequence methods, we develop a customized Convolutional Neural Network (CNN) architecture based on 1D convolutional filters to identify and characterize multiple properties of these defects. In the end, we report the scalability of the best-performing methods and compare them, for viability in field trials.

Electric vehicles (EVs) play a significant role in reducing carbon emissions. In the US, EVs are mostly owned by multi-vehicle households, and their usage is primarily studied in the context of vehicle miles traveled. This study takes a unique approach by analyzing EV usage through the lens of vehicle choice (between EVs and internal combustion engine vehicles) within multi-vehicle households. A two-step machine-learning framework (clustering and decision trees) is proposed. The framework determines the preferred trip category for EV use and captures the effects of household attributes, driver attributes, built-environment factors, and gas prices on EV use in multi-vehicle households. Results indicate that discretionary trips (accumulated local effect = 0.037) are mostly preferred for EV use. EV preference is more pronounced among households with fewer workers (<2) and lower income levels. These findings are valuable for policymakers and auto manufacturers in targeting specific market segments and promoting EV adoption.

The RMA11 water quality model, which has been previously calibrated and validated, was coupled with the RMA10 3D hydrodynamic model to evaluate sanitation scenarios in Buenaventura Bay. The bay receives direct discharge of untreated wastewater from 500,000 people through 695 outlets along the coast. Five different effluent reduction scenarios were proposed and compared based on fecal coliform concentration as an indicator. The areas where values exceed the standard for primary contact were also used to evaluate the scenarios. The model results indicate poor water quality in the bay and how that the situation will become even more severe if immediate action is not taken. The proposed reduction in discharges in stages will have temporarily more severe effects than the current situation, but these will end when the treatment plant becomes operational. However, even with the plant in operation, complete sanitation of the bay cannot be achieved, and further measures must be considered.

AML is a highly aggressive and heterogeneous form of hematological cancer. Proteomics-based stratification of patients into more refined subgroups may contribute to a more precise characterization of the patient-derived AML cells. Here, we reanalyzed liquid chromatography-tandem mass spectrometry (LC-MS/MS) generated proteomic and phosphoproteomic data from 26 chemoresistant/relapse (RELAPSE) and 15 relapse-free (REL_FREE) AML patients. We considered not only the RELAPSE and REL_FREE characteristics but also integrated the French-American-British (FAB) classification, along with considering the presence of nucleophosmin 1 (NPM1) mutation and cytogenetically normal AML. We found a significant number of differentially enriched proteins (911) and phosphoproteins (257) between the various FAB subtypes in RELAPSE patients. Patients with the myeloblastic M1/M2 subtype showed higher levels of RNA processing-related routes and lower levels of signaling related to terms like translation and degranulation, when compared to the M4/M5 subtype. Moreover, we found that high abundance of proteins associated to mitochondrial translation and oxidative phosphorylation, particularly observed in the RELAPSE M4/M5 NPM1 mutated subgroup, distinguishes relapsing from non-relapsing AML patient cells with the FAB subtype M4/M5. Thus, the discovery of subtype-specific biomarkers through proteomic profiling may complement the existing classification system for AML and potentially aid in selecting personalized treatment strategies for individual patients.

Vegetable oils contain fatty acids, phenolic compounds, natural antioxidants, and fat-soluble vitamins, which are beneficial against different diseases. Oil extraction methods can, however, affect their composition. This study aims to characterize the chemical composition of oils from two Andean seeds, cañihua (Chenopodium pallidicaule) and tarwi (Lupinus mutabilis), extracted with different organic solvents, petroleum ether, hexane, and ethanol. This study compares these oils with commercial sunflower, rapeseed, and olive oils. Results showed that oils extracted with hexane had the highest yield, while those extracted with ethanol had higher antioxidant activity and total phenolic compound content. Additionally, using ethanol makes the process more sustainable than non-green solvents. The composition of tarwi and cañahua oils extracted with ethanol includes fatty acids, tocopherols, antioxidants, and phenolic compounds associated with health benefits.

Ferulic acid has numerous beneficial effects for human health, which are frequently attributed to its antioxidant behavior. In this report many of them are reviewed and 185 new ferulic acid derivatives are computationally designed, using the CADMA-Chem protocol. For the later, the chemical space was sampled and evaluated. To that purpose selection and elimination scores were used, which are built from a set of descriptors accounting for ADME properties, toxicity, and synthetic accessibility. After the first screening, 12 derivatives were selected and further investigated. Their potential role as antioxidants was predicted from reactivity indexes, directed related with the formal hydrogen atom transfer and the single electron transfer mechanisms. The best performing molecules were identified by comparisons with the parent molecule and two references: Trolox and alpha-tocopherol. Their potential as polygenic neuroprotectors was investigated through the interactions with enzymes directed related with the etiologies of Parkinson’s and Alzheimer’s diseases. They are acetylcholinesterase, catechol-O-methyltransferase, and monoamine oxidase B. Based on the obtained results, the most promising candidates (FA-26, FA-118, and FA-138) are proposed as multifunctional antioxidants with potential neuroprotective effects. The findings derived from this investigation are encouraging and might promote further investigations on these molecules.

The reliability analysis allows to estimate the system's probability of detecting and identifying outlier. Failure to identify an outlier can jeopardise the reliability level of a system. Due to its importance, outliers must be appropriately treated to ensure the normal operation of a system. The system models are usually developed from certain constraints. Constraints play a central role in model precision and validity. In this work, we present a detailed optical investigation of the effects of the hard and soft constraints on the reliability of a measurement system model. Hard constraints represent a case in which there exist known functional relations between the unknown model parameters, whereas the soft constraints are employed for the case where such functional relations can slightly be violated depending on their uncertainty. The results highlighted that the success rate of identifying an outlier for the case of hard constraints is larger than soft constraints. This suggested that hard constraints should be used in the stage of pre-processing data for the purpose of identifying and removing possible outlying measurements. After identifying and removing possible outliers, one should set up the soft constraints to propagate the uncertainties of the constraints during the data processing. This recommendation is valid for outlier detection and identification purpose.

The complex interplay between dietary factors, inflammation, and macrophage polarization is pivotal in the pathogenesis and progression of chronic liver diseases (CLDs). Omega-3 fatty acids (FAs) have been attracted attention due to their potential to modulate inflammation and exert protective effects in various pathological conditions. This review explores the emerging role of omega-3 FAs and their specialized pro-resolving mediators (SPMs) in the context of macrophage polarization, with a focus on chronic liver diseases. Omega-3, eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) have promising effects in mitigating inflammation and enhancing the resolution of inflammatory responses. They influence the M1/M2 macrophage phenotype balance, promoting a shift towards the M2 anti-inflammatory phenotype. SPMs, such as resolvins (Rvs), protectins (PDs), and maresins (MaRs), have emerged as potent regulators of inflammation and macrophage polarization. They show anti-inflammatory and pro-resolving properties. These mediators modulate the expression of cytokines, facilitate the phagocytosis of apoptotic cells, and promote tissue repair. MaR1, in particular, has demonstrated significant hepatoprotective effects by promoting M2 macrophage polarization, reducing oxidative stress, and inhibiting key inflammatory pathways such as NF-κB. In the context of CLD, such as nonalcoholic fatty liver disease (NAFLD) and cirrhosis, omega-3 and their SPMs have shown promise in attenuating liver injury, promoting tissue regeneration, and modulating macrophage phenotypes. However, the mechanisms underlying their effects and their interactions with other cell types within the liver microenvironment require further investigation. Understanding the intricate relationship among SPM and macrophage polarization holds unlimited potential for the development of novel therapeutic strategies for chronic liver diseases.

The present work sets out the evaluation of composite laminates through optimization objective functions. Genetic Algorithms (GA), as well as Simulated Annealing (SA), were performed in order to determine the optimal ply orientations of a fiber-reinforced polymer laminate for three given load cases: 1) in-plane loads, 2) combined moments, and 3) in-plane loads and combined moments. It searches the optimal orientation layup, which fulfills at the same time both the maximum strain criterion and the Tsai-Wu failure criterion. Construction of an objective function based on the strains and the stresses involves a minimization process to deformations and a maximization of the safety factor. For the first load case, the initial solution is [±45/0/90/±45]s, and the best solution is [(45/135)2/452]s. For the second load case, [-45/45/45/-45/0/90]s is the initial layup sequence, then the best solution obtained is [(45/-45)2/452]s, where plies at 0° and 90º are not necessary even when axial loads are applied. For the third study case, the original layup sequence is [0/45/-45/45/0/90]s; meanwhile, the best solution calculated is [21/24/145/140/45/49]s. An interesting observation is that each pair of layers has a 5º gap. The simulations show that the qualitative results from the GA are better than the SA, but with a significantly higher computational cost. These kinds of computational tools are expected to be used as a reference guide for an optimal fiber configuration with respect to the common orientations used when composite laminates are designed for a structural application.

The aim of this work is to evaluate the impact of proposed modifications to conventional capturing and discharging effluents devices in Subsurface Flow Wetland (SSFW) systems. Main modifications proposed consist on extending the influence of the capture and discharge device in such a way that the SSFW width and height are fully covered. Additionally an SSFW prototype was built as pilot including the proposed modifications and the impact of the innovative device is measured based on the efficiency of the Chemical Oxygen Demand (COD) removal as compared to a traditionally built SSFW. The results show that for the innovative device, the COD removal was 10% higher than for the conventional device.

The objective of this work is to evaluate the impact of the innovative modifications made to the conventional effluent capture and discharge devices used in subsurface flow wetlands (SSFW). The main modifications developed consist on extending the influence of the capture and discharge device in such a way that the SSFW width and height are fully covered. This improved innovative device was applied and evaluated in two subsurface flow wetlands, one on a pilot scale and one on a real scale. To evaluate the impact of the innovative device with respect to conventional one in the operational functioning of subsurface flow wetlands, the elimination of chemical oxygen demand was measured and compared. The results show that for the innovative device, the COD removal was 10% higher than for the conventional device, confirming the validity and effectiveness of the modifications implemented in the effluent capture and discharge devices used in SSFW.

The global warming our generation is experiencing is just one of the great environmental crises of the Anthropocene, a geological period that began with the use of fossil fuels and that, in merely one century and a few decades of industrial activity, has altered ecosystemic processes that sustain human health and well-being. Beyond the loss of the “intrinsic value of nature”, changes in the magnitude and direction of biogeochemical cycles and increases in temperature are phenomena that not only accompany the loss of habitats and species but impair resilience by ultimately generating greater and more complex numbers and types of exposures that constitute a danger to human health. In this study, we attempted to offer some notes about the margin, understood as that space with the greatest inequity and therefore the fastest growth of risk: the collision area where deprivation marks the social determinants of health and where the greatest interaction with causes of disease occur.

Cervical cancer is preventable through vaccination, early detection, and treatment of precancerous lesions. However, global inequalities mean that the disease remains a leading cause of cancer death around the world, with over 80% of new cases and 90% of deaths occurring in low and middle-income countries (LMICs). In El Salvador, joint efforts between the Ministry of Health (MoH) and the non-profit organization Basic Health International (BHI) have been in place since 2008 with the goal of reducing the country’s disease burden. While the World Health Organization’s (WHO) call to action to eliminate cervical cancer provided worldwide momentum to implement new public health initiatives, the COVID-19 pandemic disrupted ongoing programs and jeopardized plans for the future. The purpose of this manuscript is to describe the progress that El Salvador has achieved in improving cervical cancer prevention, the impact of the pandemic on current strategies, and potential solutions that can help the country meet the WHO’s strategic targets by 2030 to accelerate the elimination of cervical cancer.

This thesis completion works it out to deepen into diverse modeling techniques for Point Absorbers. A combined frequency-time domain model is conceived, designed and developed in Matlab with FoRtran as a base., leading to obtain physical variables of primary importance, namely position, velocity and power to Energy net balance relationships of absorption. Integration of different degrees of freedom with heave as main executable leads in turn to a single buoy motion focus. Acquisition of the needed hydrodynamic coefficients is provided though application of NEMOH & BEMIO solvers due to the Boundary Element Methodology. Initially, this Wave-to-motion model is validated through comparison with previous experimental results for a floating cone cylinder shape (Buldra-FO3). A single, generic, vertical floating cylinder is contemplated then, that responds to the action of the passing regular waves excitation. Later, two equally sized vertical floating cylinders aligned with the incident wave direction are modeled for a variable distance between the bodies. For both unidirectional regular and irregular waves as an input in deep water, we approximate the convolutive radiation force function term through the Prony method. By changing the spatial disposition of the axisymmetric buoys, using for instance triangular or rectangular shaped arrays of three and four bodies respectively, the study delves into motion characteristics for regular waves. The results highlight efficient layouts for maximizing the energy production whilst providing important insights into their performance, revealing displacement amplification- and capture width-ratios, while deriving in possible interpretations of scenarios related to the the known park effect. These terms are encompassed by the novelty of a new conceptual Post-Processing methodology in the field, which leads to obtain an optimal distance for the separated bodies with effective energy absorption in a regular wave regime. In conclusion, this computational excursion envisions and proposes potentials fields of study, which will surely enhance new connections and link this renewable energy form.

In this paper we evaluate the effects of hard and soft constraints on the Iterative Data Snooping (IDS), an iterative outlier elimination procedure. Here, the measurements of a levelling geodetic network were classified according to the local redundancy and maximum absolute correlation between the outlier test statistics, referred to as clusters. We highlight that the larger the relaxation of the constraints, the higher the sensitivity indicators MDB (Minimal Detectable Bias) and MIB (Minimal Identifiable Bias) for both the clustering of measurements and the clustering of constraints. There are circumstances that increase the family-wise error rate (FWE) of the test statistics, increase the performance of the IDS. Under a scenario of soft constraints, one should set out at least three soft constraints in order to identify an outlier in the constraints. In general, hard constraints should be used in the stage of pre-processing data for the purpose of identifying and removing possible outlying measurements. In that process, one should opt to set out the redundant hard constraints. After identifying and removing possible outliers, the soft constraints should be employed to propagate their uncertainties to the model parameters during the process of least-squares estimation.

The use of mathematical models of physiological systems in medicine has allowed the development of diagnostic, treatment, and medical educational tools, but their application for predictive, preventive, and personalized purposes is restricted by their complexity. Although there are strategies that reduce the complexity of applying models by fitting techniques, they focus on a single instant of time, neglecting the effect of the system's temporal evolution. The aim of this work is to propose a dynamic fitting strategy of physiological models with large number of parameters and a constrained amount of experimental data, focused on obtaining better predictions based on the system's temporal trend and useful to predict future states. It was applied in a cardiorespiratory model as a case study. Experimental data from a longitudinal study of healthy adult subjects under aerobic exercise were used for fitting and validation. The model predictions obtained at steady-state using the proposed strategy and the nominal values of the parameters were compared. The best results corresponded mostly to the proposed strategy, mainly regarding the overall prediction error. The results evidenced the usefulness of the dynamic fitting strategy, highlighting its use for predictive, preventive, and personalized applications.

Meteorological drought indicators are commonly used for agricultural drought contingency planning in Ethiopia. Agricultural droughts arise due to soil moisture deficits. While these deficits may be caused by meteorological droughts, the timing and duration of agricultural droughts need not coincide with the onset of meteorological droughts due to soil moisture buffering. Similarly, agricultural droughts can persist even after the cessation of meteorological droughts due to delayed hydrologic processes. Understanding the relationship between meteorological and agricultural droughts is therefore crucial. An evaluation framework was developed to compare meteorological and agricultural droughts using a suite of exploratory and confirmatory tools. Receiver operator characteristics (ROC) was used to understand the covariation of meteorological and agricultural droughts. Comparisons were carried out between SPI-2, SPEI-2 and Palmer Z-index to assess intra-seasonal droughts and between SPI-6, SPEI-6 and PDSI for full-season evaluations. SPI was seen to correlate well with selected agricultural drought indicators but did not explain all the variability noted in agricultural droughts. The relationships between meteorological and agricultural droughts exhibited spatial variability which varied across indicators. SPI is better suited to predict non-agricultural drought states more so than agricultural drought states. Differences between agricultural and meteorological droughts must be accounted for better drought-preparedness planning.

This article aims at presenting the results that were found in the design and implementation of a new management model of Critical Success Factors for improving the effects of research projects. The model was based on the theory of structural equations derived from factor analyses and multiple linear regression models. For achieving the purpose, the authors developed an empirical evidence analysis founded on a literature review in the knowledge area of project management. Afterwards, the process of identification of the CSFs was carried out for a group of research projects launched in Colombia as a result of the application and measurement of an instrument. They were the basis for the development of a structural relationship modeling. Also, this contributed to determine the CSFs that explain the generation of effects of research projects, and the project management execution process from which it can be carried out based on said measurement indicators.

In this contribution, different lane-keeping control strategies for Autonomous Ground Vehicles (AGV) have been analyzed and compared. The AGV must be oriented and kept within a given reference path using the front wheel steering angle as the control action for a specific longitudinal velocity. While non-linear models can describe the lateral dynamics of the vehicle in an accurate manner, they might lead to difficulties when computing some real-time control laws such as Model Predictive Control (MPC). Linear Parameter Varying (LPV) models can provide a trade-off between computational complexity and model accuracy. Another way to reduce computational complexity is to explore other control strategies, for example, the one based on the Inverse Kinematic Bicycle model (IKIBI). Additionally, AGV sensors typically work at different measurement acquisition frequencies so that Kalman Filters (KF) are usually needed for sensor fusion. If these frequencies are slower than the actuation rate, a multi-rate KF may be needed. The two control strategies (MPC using a LPV model and IKIBI) have been compared in simulations over a circuit path in the presence of process and measurement Gaussian noise. The MPC controller has shown to provide a more accurate lane-keeping behavior than an IKIBI control strategy. Finally, it has been seen that Dual-Rate Extended Kalman Filters (DREKF) constitute an essential tool when only slow and noisy sensor feedback is available in an AGV lane-keeping application.

Configurable process models are frequently used to represent business workflows and other discrete event systems among different branches of large organizations: they unify commonalities shared by all branches and describe their differences, at the same time. The configuration of such models is usually done manually, which is challenging. On the one hand, when the number of configurable nodes in the configurable process model grows, the size of the search space increases exponentially. On the other hand, the person performing the configuration may lack the holistic perspective to make the right choice for all configurable nodes at the same time, since choices influence each other. Nowadays, information systems that support the execution of business processes create event data reflecting how processes are performed. In this article, we propose three strategies (based on exhaustive search, genetic algorithms, and greedy heuristic) that use event data to automatically derive a process model from a configurable process model that better represents the characteristics of the process in a specific branch. These strategies have been implemented in our proposed framework, and tested in both business-like event logs as recorded in a higher educational ERP system, and a real case scenario involving a set of Dutch municipalities.

This study investigates the valorization potential of yellowfin tuna tails for the production of high-value commercial products. Muscle and skins were firstly mechanically separated by using a specifically designed device. The muscle was then used as a nitrogen source for the growth of the proteolytic enzymes-producer Bacillus subtilis, whereas the skins were employed for gelatin extrac-tion. The proteases from Bacillus subtilis were partially purified and used to produce antioxidant peptides from gelatin obtained. The gelatin obtained formed a gel upon cooling, with gelling and melting temperatures at 16 ºC and 22 ºC, respectively, and Bloom Strength of ≈ 160. RSM was used to determine the optimal hydrolysis conditions to obtain the highest antioxidant activity (35.96%, measured as DPPH radical scavenging activity), which were 50°C / 6.5 IU of enzyme. The findings emphasize the importance of an integrated approach to maximize the value of tuna by-products, promoting sustainability in the frame of circular bioeconomy. Overall, these results contribute to the efficient utilization of tuna by-products, waste reduction, and enhance economic viability of the tuna industry.

The vocal folds are found in the larynx and their vibrations produce the voice. Little is known about morphology and the size of cattle larynx. The aim of the study was to quantify the shape asymmetry of the vocal folds in calves obtained post-mortem using a geometric morphometric approach. A sample of 14 larynges from calves (in an age range 335 to 625 days) belonging to “Bruna dels Pirineus” breed and its F1 crosses was obtained in an abattoir during the first semester of 2021. Landmark sets were superimposed on images of fixed transverse sections of larynges. Using geometric morphometric techniques, we analysed the presence of asymmetries. Results demonstrate differences between right and left vocal fold sides as directional asymmetry, at least in fixed structures. Our findings provide a foundation for quantifying the possible contribution of vocal organ asymmetry among cattle. This study can be considered the first to detect vocal fold asymmetries in cattle. Studies with a larger sample size are needed to validate the information in large populations. One limitation is that the present study does not have samples from adult animals, so it would be interesting to know if the results are similar among them.

Mammalian fertilization initiates the reprogramming of oocytes and sperm, leading to the formation of a totipotent zygote. The zygotic genome remains transcriptionally silent throughout this intricate process, undergoing the maternal-to-zygotic transition (MZT) and subsequent zygotic genome activation (ZGA). Histone modifications are pivotal in shaping cellular identity and gene expression in many mammals. Recent advances in chromatin analysis enable a detailed exploration of histone modifications during ZGA. This review delves into conserved and unique regulatory strategies, providing essential insights into the dynamic changes in histone modifications and their variants during ZGA in mammals. The objective is to explore recent advancements in leading mechanisms related to histone modifications governing this embryonic development phase in depth. These considerations will be useful for informing future therapeutic approaches that target epigenetic regulation in diverse biological contexts, ranging from regenerative medicine to cancer research. It will also contribute to the extensive areas of evolutionary and developmental biology and possibly lay the foundation for future research and discussion on this seminal topic.

Fifty bull calves of the Continental × British crossbred (147.0 ± 1.67 kg body weight, BW) were used in a completely randomized design to investigate the effect varying levels and duration of calcium propionate (CaPr) supplementation on the growth performance, body fat reserves, serum metabolites, and hemogram of high-risk newly received stocker calves. These calves were individually housed and fed a received-diet for 56 d. The calves received the following treatments: 1) No CaPr (CTL), 2) 20 g CaPr/calf/d, 3) 40 g CaPr/calf/d, 4) 60 g CaPr/calf/d, and 5) 80 g CaPr/calf/d, during 14, 28, 42 and 56 d the after arrival. The supplementation with 20 g CaPr from 28 to 56 d after arrival increases average daily gain (ADG) and BW (p &lt; 0.05), and DMI is not affected (p &gt; 0.05). This is reflected at 28 d with increases (p &lt; 0.05) in ADG:DMI ratio and longissimus muscle area (LMA), and at 56 d in back fat thickness (BFT) y fat thickness at the rump (FTR). Also, with 20 g, blood urea nitrogen decreased (p &lt; 0.05); and increases were observed in the activity of gamma glutamyltransferase, monocytes (quadratic trend, p &lt; 0.07) and granulocytes% (quadratic effect, p &lt; 0.03). However, as the level of CaPr increased during the first 14 d after arrival, daily water intake, creatinine, total cholesterol, mean corpuscular hemoglobin concentration (linear effect, p &lt; 0.05), globulin, calcium and mean corpuscular volume (linear trend, p = 0.08) increased, while alkaline phosphatase (linear trend, p = 0.07) and lymphocytes (linear effect, p = 0.05) decreased. Finally, the different levels of CaPr supplementation did not produce any significant effects or differences (p &gt; 0.05), in the remaining serum metabolites and hemogram (p &gt; 0.05). Ultimately, the inclusion of 20 g CaPr/calf/d in the diet for 28 d in newly received stocker calves increases ADG, ADG:DMI ratio and LMA. If extended to 42 or 56 d, the increases in ADG persist, but there is also a rise in body fat reserves (BFT and FTR) at the expense of a reduction in ADG:DMI ratio. Furthermore, the different supplementation levels did not impact the reference range for most serum metabolites or the health of stocker calves.

Ethiopian agriculture is not only affected by precipitation declines (meteorological droughts) but also soil dryness caused by temperature increases and associated long-term hydrological changes. Meteorological drought indicators (e.g., SPI), do not fully capture the water deficits in agricultural systems (i.e., agricultural droughts). An Ethiopia-wide assessment of meteorological and agricultural drought trends was carried out to characterize century-scale (1902 – 2016) changes in droughts. SPI and SPEI calculated using two-month accumulation and the Palmer Z-index were used for assessing intra-season drought trends. SPI and SPEI at six-month accumulations and PDSI were used to define full season droughts. Detrended variance corrected Mann-Kendall test was used for trend analysis during Bega (dry), Belg (short-rainy) and Meher (long-rainy) seasons. The SPEI-2 and PDSI were most aggressive in characterizing intra-season and seasonal-drought trends. There is on average 1% - 6% annual increase in dryness with the lower estimate based on precipitation declines and the upper end accounting for seasonal soil moisture dynamics. The area between 37.5° E – 42.5° E denotes a climate hot-spot. Precipitation declines in Belg along the Ethiopia-South-Sudan/Sudan border during Belg and along Eretria-Ethiopia border during Meher have the potential to exacerbate transboundary water conflicts and further threaten the food security of the region.

With an increasing demand for quality of care and lower costs, hospitals are looking for industry-based methods to improve efficiency in their processes. This study aims to reduce waste in a public hospital in Mexico by improving the medical supply process for the operating room. To this end, a lean healthcare (LH) implementation following the DMAIC approach (Define-Measure-Analyze-Improve-Control) is carried out. We analyze the value stream of the supply process, including main surgical procedures and their related medical supplies, and identify different causes of inefficiency, which are evaluated and controlled through different tools, including a value stream map, Kanban, and the 5S program. As a result, five types of waste were reduced. Over-processing requests were reduced by 15.3%, defective identification numbers were reduced by 46.5%, redundant processing was improved by 94.8%, near 2.8% of the unnecessary inventory was reduced, and transportation waste was reduced by up to 16.7%. Finally, the lead-time for the main supplies was reduced by 33 days. This work demonstrates that LH and DMAIC are effective in reducing waste and are highly conducive to improving sustainability in healthcare processes. Moreover, it provides practical insights for practitioners regarding the implementation of LH in public hospitals in developing countries.

Twenty-four extensively-reared Iberian pigs were used to study the influence of fattening period length (30, 60 or 90 days) on the fatty acid profiles of intramuscular and subcutaneous fat and the relationships between both profiles. Regarding fatty acid (FA) percentage, PUFA was greater in backfat and MUFA was greater in intramuscular fat (IMF), regardless fattening period length. The longer fattening period increased MUFA content in backfat (which had a more marked change in oleic acid) and decreased PUFA content in backfat and IMF, but it did not affect SFA content. Within the 3-layers subcutaneous backfat, SFA content was greater in the inner layer, MUFA was greater in the outer layer and PUFA was greater in both of these layers. The few differences in FA composition between both adipose tissues suggest that the changes due to the feeding regime are slow and, therefore, although the length of the fattening phase was increased, the fatty acid profile did not change substantially. The strong relationship between the FA profiles of IMF and backfat might be used to predict one profile from the other one when this latter was more readily available for sampling or analytical reasons.

Measurements of systems taken along a continuous functional dimension, such as time or space, are ubiquitous in many fields, from the physical and biological sciences to economics and engineering. Such measurements can be viewed as realisations of an underlying smooth process sampled over the continuum. However, traditional methods for independence testing and causal learning are not directly applicable to such data, as they do not take into account the dependence along the functional dimension. By using specifically designed kernels, we introduce statistical tests for bivariate, joint, and conditional independence for functional variables. Our method not only extends the applicability to functional data of the Hilbert-Schmidt independence criterion (HSIC) and its d-variate version (d-HSIC), but also allows us to introduce a test for conditional independence by defining a novel statistic for the conditional permutation test (CPT) based on the Hilbert-Schmidt conditional independence criterion (HSCIC), with optimised regularisation strength estimated through an evaluation rejection rate. Our empirical results of the size and power of these tests on synthetic functional data show good performance, and we then exemplify their application to several constraint- and regression-based causal structure learning problems, including both synthetic examples and real socio-economic data.

Over the years, chitosan has been the subject of numerous studies and has gained significant popularity as a biomaterial due to its various characteristics, including biocompatibility, biodegradability, and bioactivity. In this work, chitosan fibres surface was modified with ursolic acid to improve their antibacterial properties by wet impregnation method. Five specimens of chitosan fibres were immersed in ursolic acid (UA) solution for varying immersion times of 1, 2, 4, 6, and 8 hours. Characterization was carried out by means of FTIR, SEM, UV-Vis spectroscopy; the results indicated an ongoing chemical reaction between chitosan and ursolic acid resulting in changes to the chemical structure. After 2 hours, the absorbance ratio remained constant; suggesting that the reaction had reached completion and the chemical structure of the sample remained stable. Antibacterial tests were performed on the resulting chitosan fibres against two bacterial strains. The fibres without ursolic acid did not exhibit any noteworthy antibacterial activity against either strain. However, the chitosan fibres modified with ursolic acid showed significant and almost strong antibacterial activity against the Gram-positive strain, S. aureus. These results suggest that chitosan fibres modified with ursolic acid could have potential applications as antibacterial materials, particularly against Gram-positive bacteria.

The Mar Menor is a Spanish coastal lagoon of great ecological and economic interest. The agricultural and tourist activities developed in the surroundings of the lagoon, together with the modifications in its channels of connection with the Mediterranean Sea, have notably affected the quality of its waters, which is altering the natural balance of the ecosystem. In this work, an analysis of the density of phytoplankton present in the lagoon between the months of May to December 2017 has been carried out. There, it has been a notable increase in the density of organisms in post-summer samplings, following the recording of higher temperatures, and the presence of Chlorophyceae, Cyanophyceae, Chrysophyceae and nanoplanktonic Cryptophyceae stands out. The data collected indicate a significant increase in the eutrophication process of the lagoon that requires the development of management plans to reduce agricultural discharges and promote the recovery of the lagoon and its native species.

The emergence of the COVID-19 pandemics prompted a fast development of novel diagnostic methods of the etiologic virus SARS-CoV-2. Methods based on CRISPR-Cas systems have been particularly promising because they can achieve a similar sensitivity and specificity to the golden standard RT-qPCR, especially when coupled to an isothermal pre-amplification step. Furthermore, they have also solved inherent limitations of RT-qPCR that impede its decentralized use and deployment in the field, such as the need for expensive equipment, high cost per reaction, and delivery of results in hours, among others. In this review, we evaluate publicly available methods to detect SARS-CoV-2 that are based on CRISPR-Cas and isothermal amplification. We critically analyze the steps required to obtain a successful result from clinical samples and pinpoint key experimental conditions and parameters that could be optimized or modified to improve clinical and analytical outputs. The COVID outbreak has propelled intensive research in a short time, which is paving the way to develop effective and very promising CRISPR-Cas systems for the precise detection of SARS-CoV-2. This review could also serve as an introductory guide to new labs delving into this technology.

Background: Adolescence is a developmental stage when there is a high risk of engaging in non-suicidal self-injury (NSSI). There is recent interest in the study of thwarted belongingness and perceived burdensome as variables associated with the frequency of NSSI in adolescents. Meaning in life (MIL) could be negatively associated with thwarted belongingness and perceived burdensome. To date, no studies have analyzed whether thwarted belongingness and perceived burdensomeness could be associated with the frequency of NSSI in adolescents. On the other hand, no studies have analyzed the buffering role of MIL in the association between thwarted belongingness and perceived burdensomeness and the frequency of NSSI. Aims: a) to test whether thwarted belongingness and perceived burdensomeness are associated with NSSI frequency; b) to test whether MIL moderates the association between thwarted belongingness and NSSI frequency; and c) to test whether MIL moderates the association between perceived burdensomeness and NSSI frequency. Method: The sample consisted of N = 1531 participants between 12 and 18 years old from Spain. The participants filled out the Inventory of Statements about Self-Injury, Purpose-In-Life Test-Adolescents Version, and Interpersonal Needs Questionnaire. Moderation analysis were performed. Results: Thwarted belongingness and perceived burdensomeness were positively associated with the frequency of NSSI in Spanish adolescents. MIL was a moderating variable between thwarted belongingness and the frequency of NSSI, and between perceived burdensomeness and the frequency of NSSI. Conclusion: Thwarted belongingness and perceived burdensomeness could be a risk factor for NSSI and MIL could be a protective factor against NSSI, and adding these variables to current descriptive theories of NSSI in adolescents would allow us to improve the assessment and treatment protocols for adolescents with NSSI.

In the international scenario of agriculture, Brazil stands out as the main producer and consumer of common bean (Phaseolus vulgaris L.) The increase in the productive potential of the crop is mainly due to breeding programs. The objective of this study was to estimate genetic parameters, predict genotypic values with REML/BLUP (Restricted Maximum Likelihood/Best Linear Unbiased Prediction) and, based on these values, study the variability in common bean cultivars with carioca and black grain. Twenty three agromorphological descriptors were evaluated, among them grain yield. Deviance analysis detected significant differences between the cultivars in both groups. Selective accuracy (Ac) was considered high for most of the traits. Broad-sense heritability (h_g² ) ranged from 0.05 to 0.72, but it was low for the trait yield (YLD). In the carioca grain group, the h_g² values for the traits related to plant morphology were higher than in the black group. Nevertheless, the h_g² values in the black group were higher in relation to the pod and seed traits. The correlations for YLD were moderate but different in the two commercial groups studied. In the black group, variables related to the seed morphology were correlated with grain yield, and in the carioca group, traits related to seed quantity. Based on the groupings, variability among the cultivars was observed. Three distinct clusters were formed for the carioca group and four for the black group. Based on the predicted genetic values, genetic variability and the most adapted and stable cultivars were detected among the cultivars in the studied environments.

The major stress-inducible Hsp70 (HSPA1A) is overexpressed in the cytosol of many highly aggressive tumor cells including glioblastoma multiforme and presented on their plasma membrane. Depending on its intracellular or membrane localization, Hsp70 either promotes tumor growth or serves as a target for NK cells. The kinetics of the membrane Hsp70 (mHsp70) density on human glioma cells (U87) was studied after different irradiation doses to define the optimal therapeutic window for Hsp70-targeting NK cells. To maintain the cells in the exponential growth phase during a cultivation period of 7 days different initial cell counts were seeded. Although cytosolic Hsp70 levels remained unchanged on days 4 and 7 after a sublethal irradiation with 2 Gy, 4 Gy and 6 Gy, a dose of 2 Gy resulted in an upregulated mHsp70 density in U87 cells which peaks on day 4 and starts to decline on day 7. Higher radiation doses (4 Gy, 6 Gy) resulted in an earlier and more rapid onset of the mHsp70 expression on days 2 and 1, respectively, followed by a decline on day 5. Membrane Hsp70 levels are higher in G2/M than in G1, however, an irradiation-induced cell cycle arrest on days 4 and 7, was not associated with an increase in the mHsp70 density. Extracellular Hsp70 concentrations increased significantly compared to sham (0 Gy) irradiated cells on days 4 and 7 but not on day 1. Functionally, elevated mHsp70 densities were associated with a significantly better lysis by Hsp70-targeting NK cells. In summary, the kinetics of changes in the mHsp70 density upon irradiation on tumor cells is time- and dose-dependent.

The continuous casting tundish is non-isothermal due to heat losses and temperature variation from the inlet stream generating relevant convection forces. This condition is commonly avoided through qualitative fluid dynamic analysis only. This work searches to establish the conditions for which non-isothermal simulations are mandatory or for which isothermal simulations are enough to accurately describe the fluid dynamics inside the tundish by quantifying the buoyant and inertial forces. The mathematical model, simulated by CFD software, considers the Navier-Stokes equations, the realizable k- model for solving the turbulence, and the Lagrangian discrete face to track the inclusion trajectories. The results show that temperature does not significantly impact the volume fraction percentages or the mean residence time results, nevertheless, bigger velocity magnitudes under non-isothermal conditions than in isothermal conditions and noticeable changes in the fluid dynamics between isothermal and non-isothermal cases in all the zones where buoyancy force dominates over inertial forces were observed. Because of the results, it is concluded that isothermal simulations can accurately describe the flow behavior in tundishes when the flow control devices control the fluid dynamic, but the simulation without control devices or with a weak fluid dynamic dependence on the control devices requires non-isothermal simulations.

The licensing of Talimogene Laherparepvec (T-Vec) represented a landmark moment for oncolytic virotherapy, since it provided unequivocal evidence for the long-touted potential of genetically modified replicating viruses as anti-cancer agents. Whilst T-Vec is promising as a locally delivered virotherapy, especially in combination with Immune-checkpoint inhibitors, the quest continues for a virus capable of specific tumour cell killing via systemic administration. One candidate is oncolytic Adenovirus; it’s double stranded DNA genome is easily manipulated and a wide range of strategies and technologies have been employed to empower the vector with improved pharmacokinetics and tumour targeting ability. As well characterised clinical and experimental agents we have detailed knowledge of Adenoviruses mechanisms of pathogenicity, supported by detailed virological studies and in vivo interactions. In this review we highlight the strides made in the engineering of bespoke adenoviral vectors to specifically infect, replicate within, and destroy tumour cells. We discuss how mutations in genes regulating adenoviral replication after cell entry can be used to restrict replication to the tumour, and summarise how detailed knowledge of viral capsid interactions enable rational modification to eliminate native tropisms, and simultaneously promote active uptake by cancerous tissues. We argue that these designer-viruses, exploiting the viruses natural mechanisms and regulated at every level of replication, represent the ideal platforms for local overexpression of therapeutic transgenes such as immunomodulatory agents. Where T-Vec has paved the way, Ad based vectors now follow. The era of designer oncolytic virotherapies looks decidedly as though it will soon become a reality.

Threats to natural ecosystems are closely linked to human development, and the lack, insufficiency or inefficiency of public policies are some of the most important drivers of negative effects on the environment. The contribution of the IUCN’s Red List of Ecosystems (RLE) to conservation topics has been discussed in previous studies; however, to date its implications for conservation in public policies have not been addressed. This perspective discusses how the RLE may support the improvement and development of these policies, specifically through the implications for public policy of each of the criteria that substantiate the threat status of ecosystems. We aim to provide a plausible baseline to the operationalization of RLE in public and conservation policy, facilitating the work of governments, practitioners and decision makers. Finally, we provide recommendations and examples as to how to proceed in creating and modifying different public policy instruments, such as land-use planning, spatial zoning, tax reduction, compensation schemes, climate change adaptation plans, management of introduced species, development offsets and restoration investment. This perspective contributes to implement RLE into public policy and to improve ecosystem conservation by expanding the current scope of RLE into practical and political dimensions through plausible actions, policies and strategies.

This paper presents the mathematical modeling for designing a 10[kW] DC-AC inverter system from 48 [V] DC to 120 V ACrms, considering its non-linear operation, allowing to obtain a detailed simulation to assess the proposed fuzzy PI control (with anti-windup action) and its optimal operation. The performance assessment of the converter was carried out with the discrete treatment of the voltage and current signals using spectral analysis, filtering considerations, and evaluation of limit cycle technique to determine the system's stability. The main results showed that THD at the filter output (transformer and capacitor) was around 0.0322% and 0.0632% at nominal load in open loop and closed loop, respectively. The inverter system presented more sensitivity in the current signal with a ripple at 120 [Hz] of 2.02% and at 5000 [Hz] of 10.62% (at nominal load). However, when the system operates in a closed loop, the current ripple at 120 [Hz] is 2.38% and at 5000 [Hz] is 10.62%.

During the last decades, the production systems have developed different strategies to increase their competitiveness in the global market. In a manufacturing and services systems, Lean Manufacturing has been consolidated through the correct implementation of its tools. The present paper presents a case study developed in a Food Packer company where a Simulation Model was considered as an alternative to reduce the waste time generated by the poor distribution of operations and transportation areas for a product within the factory. As a matter of fact, the company has detected problems on the layout distribution that prevents to fulfill the market demand. In addition, the principal aim was to create a simulation model to test different hypothetical scenarios and alternative designs for the layout distribution without modifying its facilities. Moreover, the implemented methodology was based on classical models of simulation projects and a compendium of the manufacturing systems optimization by simulation process used during the last ten years. Also, a mathematic model supported by the Promodel ® simulation software was developed considering the company characteristics; along with the model development, it was possible to compare the production system performance from the percentage of used locations, the percentage of resources utilization, the number of finished products, and the level of Work in Process (WIP). Finally, the verification and validation stages were performed before running the scenarios in the real production area. The results generated by the implementation of the project represent an increase of 68% in the production capacity and a reduction of 5% in the WIP. In addition, both outcomes are associated with the resources management, which were reassigned to other production areas.

Forty-five male Dorper crossbred lambs (40.17 ± 0.35 kg BW) were used in order to investigate the effects of the duration of calcium propionate (CaPr) supplementation in lambs finished with zilpaterol hydrochloride (ZH) on the productive performance, carcass characteristics, and meat quality. Lambs were individually housed and fed a finishing-diet for 42 d before being slaughtered. Lambs received the following treatments: 1) No additives (CTL), 2) ZH supplementation for 28 d (with 3 d ZH withdrawal before slaughter) at a dosage of at 7.2 mg/kg diet (ZH), for treatments 3, 4, and 5, lambs received ZH and 10g CaPr/lamb/d throughout the entire phase (42 d), or during the last 28 or 14 d before slaughter. Compared to CTL, ZH lambs exhibited a similar average daily gain (ADG) but had lower dry matter intake (DMI), leading to increased feed efficiency. Supplementing with ZH alone did not affect carcass traits, visceral mass, whole cuts, or meat quality. Lambs that received both CaPr and ZH exhibited quadratic increases (p &lt; 0.05) in final BW (FBW), ADG, and dressing percentage (D%). These increases were optimal at an estimated inclusion durations of 26 d for FBW, 30 for ADG, and 39 d for D%. The ADG:DMI ratio and the longissimus muscle area (LMA) both exhibited quadratic increases (p &lt; 0.05). The optimal duration of CaPr supplementation for ADG:DMI ratio was found to be 28 d, while for LMA, it was 14 d. As the period of CaPr supplementation increased, there was a linear increase (p &lt;0.05) in hot carcass weight, leg circumference, and whole cuts of breast IMPS209 and shoulder IMPS207. Cook loss percent increased quadratically (p &lt; 0.05), being higher when CaPr was included for an estimated duration of 26 d. As the duration of CaPr supplementation increased, the purge loss percentage (PLR) also increased linearly (p &lt; 0.05). In conclusion, including CaPr in the diet for a duration of 28 d in lambs improved the response to ZH supplementation on the productive performance, carcass weight and some whole cuts. However, it can also have a negative effect on PRL%.

Farmland edge plants can support high butterfly richness. Our objective was determine if, even in farms under intensive cultivation, the diversity of plants (mostly native) in crop edges is enough to sustain a high species richness of butterfly. We characterized the vegetation on the edges of Medicago sativa farms in central Mexico and identified the species of diurnals butterflies (Rhopalocera) associated. Butterflies and plants were counted along transects at the edges of a cul-tivated field during 24 months. We found 2710 individuals of plants, belonging to 48 different species from 24 families; 1749 individuals of diurnal butterflies, belonging to 57 species from six families. Most than half of the plant species found were native flora of central Mexico and with ethnobotanical use. A similarity analysis test showed significant differences in floristic composi-tion between transects. The Canonical Correspondence Analysis between butterfly species and plant families showed three groups. Six butterfly species were migratory and four mexican en-demic species, most of them associated with a group formed by Amaranthaceae, Euphorbiaceae, Annonaceae Lamiaceae Apiaceae and Fabaceae families. The high diversity of plants in our agro-ecosystem plays an important role to sustain a high diversity of butterflies and could be useful as biological corridors.

Abstract: Background: Of the many side effects suffered by cancer patients, those related to cognitive performance have become increasingly prominent in clinical practice. We know that chemotherapy generates a series of side effects, such as nausea and vomiting, alopecia, and so on, which can be counteracted by complementary medication. However, in the case of post-chemotherapy cognitive impairment, or chemo brain, these cannot be controlled with drug therapies. However, before any intervention can be considered, it is necessary to know exactly what cognitive impairment is being triggered. For this reason, we decided to study the cognitive status of breast cancer patients. Methods: analytical, prospective, three-measure longitudinal, intrasubject unifactorial, non-probabilistic and accidental assignment study. The sample came from the Medical Oncology Department at Hospital de Salamanca, in Spain. Cognitive function (Trail Making Test and Stroop Test) was established as the primary variable; the presence of sleep disorders (Insomnia Severity Index, ISI) and anaemia (haemoglobin levels in blood) were analysed as secondary variables, in addition to sociodemographic variables (age, stage, type of carcinoma, radiotherapy, menopause, social support network, marital status, years of schooling and employment status). Results: We recruited 151 individuals according to the selection criteria. We can confirm that factors including anaemia, menopause, patient support network and marital status, years of schooling, and employment status did affect the cognitive performance of the patients in active chemotherapy treatment in the study. In contrast, sleep disorders, age, radiotherapy treatment, stage of disease, and type of carcinoma did not affect the cognitive performance of the cancer patients. Conclusions: Chemotherapy does impact the cognitive performance of breast cancer patients.

Background: Of the many side effects suffered by cancer patients, those related to cognitive performance have become increasingly prominent in clinical practice. We know that chemotherapy generates a series of side effects, such as nausea and vomiting, alopecia, and so on, which can be counteracted by complementary medication. However, in the case of post-chemotherapy cognitive impairment, or chemo brain, these cannot be controlled with drug therapies. However, before any intervention can be considered, it is necessary to know exactly what cognitive impairment is being triggered. For this reason, we decided to study the cognitive status of breast cancer patients. Methods: analytical, prospective, three-measure longitudinal, intrasubject unifactorial, non-probabilistic and accidental assignment study. The sample came from the Medical Oncology Department at Hospital de Salamanca, in Spain. Cognitive function (Trail Making Test and Stroop Test) was established as the primary variable; the presence of sleep disorders (Insomnia Severity Index, ISI) and anaemia (haemoglobin levels in blood) were analysed as secondary variables, in addition to intervening variables (age, stage, type of carcinoma, radiotherapy, menopause, social support network, marital status, years of schooling and employment status). Results: We recruited 151 individuals according to the selection criteria. We can confirm that factors including anaemia, menopause, patient support network and marital status, years of schooling, and employment status did affect the cognitive performance of the patients in the study. In contrast, sleep disorders, age, radiotherapy treatment, stage of disease, and type of carcinoma did not affect the cognitive performance of the cancer patients. Conclusions: Chemotherapy does impact the cognitive performance of breast cancer patients.