Mechanical robustness and high energy efficiency of composite materials are immensely important in modern stretchable, self-powered electronic devices. However, the availability of these materials and their toxicities are challenging factors. This paper presents the mechanical and energy-harvesting performances of low-cost natural rubber composites made of stearic acid-modified diatomaceous earth (mDE) and carbon nanotubes (CNTs). The obtained mechanical properties were significantly better than those of unfilled rubber. Compared to pristine diatomaceous earth, mDE has higher reinforcing efficiencies in terms of mechanical properties because of the effective chemical surface modification by stearic acid and enhanced filler-rubber interactions. The addition of a small amount of CNT as a component in the hybrid filler systems not only improves the mechanical properties but also improves the electrical properties of the rubber composites and has electromechanical sensitivity. For example, the fracture toughness of unfilled rubber (9.74 MJ/m3) can be enhanced by approximately 484% in a composite (56.86 MJ/m3) with 40 phr (per hundred grams of rubber) hybrid filler, whereas the composite showed electrical conductivity. At a similar mechanical load, the energy-harvesting efficiency of the composite containing 57 phr mDE and 3 phr CNT hybrid filler was nearly double that of the only 3 phr CNT-containing composite. The higher energy-harvesting efficiency of the mDE-filled conductive composites may be due to their increased dielectric behaviour. Because of their bio-based materials, rubber composites made by mDE can be considered eco-friendly composites for mechanical and energy harvesting applications and suitable electronic health monitoring devices.

Mangrove vegetation plays a vital role in habitat and nursing ground for different organisms and prevents coastal erosion caused by wave and tide action. In recent years the mangrove vegetation in Chattogram coast, Bangladesh, has been interrupted by other infrastructural development, which has a destructing effect on the surrounding environment. Land surface temperature analysis of an area helps learn about different environmental conditions, weather, and climate. It is also essential to monitor the rising temperature and global warming, the biggest threat to humanity. NDBI and NDVI are the efficient process for monitoring vegetation and build up areas of a geographical location. This study focused on those analyses to understand the importance of mangrove vegetation in the Salimpur area and surrounding coastal areas of Chattogram by studying the relationship between NDVI and NDBI, NDVI and LST, NDBI, and LST. The outcome indicates that a higher vegetation index results in lower land surface temperature during different periods, negatively correlated. This study also found a strong positive correlation between buildup index (NDBI) and land surface temperature (LST), which means Land Surface temperature was found higher in Buildup areas. The vegetation areas are greatly affected by the buildup areas. The correlation between buildup areas and vegetation areas was strongly negative, which means an increase of NDBI decreases NDVI, and a decrease of NDBI increases NDVI.

Microplastics, which are plastic particles smaller than 5 mm in size, are a growing environmental concern since they have been found in oceans, rivers, lakes, and even on land. These tiny particles can escape water filtration systems and end up in water bodies as well as through the degradation of the larger plastic products causing serious environmental and food safety concerns. This research represents the magnitude of this pollution, characterization of microplastic contamination, its type of polymer, and possible sources of this pollution in the rivers around Dhaka, Bangladesh. Quantitative analyses were done following the method suggested by the NOAA and other conventional methods. Among the rivers, Buriganga has the highest microplastic pollution with 3.654 items/L in surface water and 43.125 items/kg in sediment. The concentration in Shitalakshya and Turag rivers are 3.011 items/L and 2.051 items/L in surface water and 34.875 and 17.875 items/kg in sediment respectively. ANOVA test revealed a significant difference between the concentration level of microplastic in the surface water of the Burigana and Turag rivers. A positive correlation between the concentration level of microplastic in the surface water and the sediment was also found. On average 58% of the microplastics were found to be fibrous in surface water. Qualitative analyses were done to find the characteristics and chemical composition of the microplastics. Through the use of FTIR spectroscopy, the study identified different kinds of synthetic polymers in the sample including polyamide (Nylon), polyethylene (PE), polystyrene (PS), polypropylene (PP), polyethersulfone (PES), polyvinyl chloride (PVC), and polyethylene terephthalate (PET) and polyethylene were the most abundant polymer in the samples. This study involved the investigation of three distinct rivers located in the vicinity of Dhaka city

In terms of sustainability, cities become smart when they provide intelligent services to the inhabitants using information and communication technologies without threatening the future of the environment, economy or the society. However, the process of developing such sustainable smart services has certain challenges, especially in understanding the real needs of the people living in the city. Inhabitants of the city or the citizens are the key stakeholders in case of smart services in a city. Active involvement of the people throughout the process is a way to design such services. On the other hand, integrating sustainability, for example including environmental data to the smart city services has been found challenging. Therefore, this research discusses an approach on combining environmental data with regular smart city services and to engage city inhabitants in the process, the approach that is adapted from the concept of living lab methodology. Finally, an application has been developed to represent a smart city service following this method.

In this work, an analog front-end (AFE) circuit for Electrocardiogram (ECG) detection system has been designed, implemented, and investigated in an industry-standard Cadence simulation framework using advanced technology node of 45 nm. The AFE consists of an instrumentation amplifier, a Butterworth band-pass filter (with fifth-order low-pass and second-order high-pass sections), and a second-order notch filter- all are based on two-stage, Miller-compensated operational transconductance amplifiers (OTA). The OTAs have been designed employing the $g_m/I_D$ methodology. Both the pre-layout and post-layout simulation were carried out. The layout consumes an area of 0.0058 mm$^2$ without the resistors and capacitors. Analysis of various simulation results were carried out for the proposed AFE. The circuit demonstrates a post-layout bandwidth of 239 Hz with a variable gain between 44 to 58 dB, a notch depth of -56.4 dB at 50.1 Hz, a total harmonic distortion (THD) of -59.65 dB (less than 1\%), an input referred noise spectral density of $

Cervical cancer is mostly diagnosed cancer of women worldwide and the second most common cancer among middle-aged women in Bangladesh. Knowledge and perception of women are considered one of the major components of prevention strategy. We carried out this survey to assess the existing knowledge level of students and their perception to the role of vaccination in preventing cervical cancer. The participants were female undergraduate students studying Public Health in a university in Chattogram city of Bangladesh. A total of 275 female students were interviewed through prescribed questionnaire possessing questions on basic information of cervical cancer, its causal agent, risk factors, prevention methods, and vaccination. We marked the responses of participants with zero for wrong answer and one for every correct answer and ranked the knowledge level of students. The mean age of study participants was 20.68 years. In total, 69.1% students possessed poor knowledge whereas, 30.9% had good knowledge. The country of students has significant association with their level of knowledge. Most of the students got information on cervical cancer from traditional media (49.8%) and doctor (30.9%) and the effect of these two sources was statistically significant on the knowledge level of students. Students mostly identified vaccination (21.1%) and Gynecological examination (14.39%) as preventing methods. However, 65.5% of them acknowledge that vaccines cannot prevent this cancer and 33.4% believe in different risks of vaccine. Although students have heard of cervical cancer the overall knowledge was insufficient and perceived negative concepts about cancer vaccine. Therefore, we recommend the initiation of educational programs on basic reproductive health and health seeking behaviour targeting young women to successfully control and prevention of this life-threatening health problem.

Governance is one of the most essential instruments for environmental management. Biodiversity is in the core field of environmental governance. Yet environmental authorities are persistently challenged the loss of biodiversity as a very important global issue for several years due to high dependent exposure to risks. The study attempts to relook at the key governance tools that strengthen policies towards managing biodiversity within and around the national park’s survey in Moulvibazar district. The study showed that biodiversity related legislation amended was the highest in Bangladesh for the period of 2010 to 2016. The growth of policy instruments maximized at but in low environmental governance services within the same period. The study assessed that the existing environmental policy instrument is inadequate and sluggish for effective conservation, compared with several others governance tools and various performances are still below par. Governance knowledge is indispensable for biodiversity management but such knowledge is poorly identified. These results reflect the importance of effective governance for transparency that the State provides. The research is to represent a dynamic and adaptable framework that can be applied for collective governance relevant to policy integration, participation and enforcement in order to foster environmental conservation sustainability.

Acemella oleracea is known as toothache plant belongs to the family of Asteraceae. It is treated as a medicinal remedy like tuberculosis, illness, cough, rheumatism, and illness. This study was concentrated on the antioxidant, cytotoxic, antimicrobial & thrombolytic activities of methanol extract of Acmella oleracea leaves using in vitro model. The antioxidant activity was estimated as trolox equivalent antioxidant capacity utilizing the DPPH and reducing power tests. The plant extract was tested for its cytotoxic action using a brine shrimp lethality bioassay, thrombolytic activity using clot disruption, and antibacterial activity using a disc diffusion assay technique against four distinct gram-positive and gram-negative bacteria. IC₅₀ value of standard ascorbic acid for DPPH was 7.8µg/ml and the IC50 of the methanol extract of Acmella oleracea leaves was 198.34µg/ml that was moderate effect at all compare with ascorbic acid. Thrombolytic assay of Streptokinase as a positive control showed 88.49% where the extract shows 18.69% lytic activity shows the assay. In this study, the sample of LC₅₀ results of cytotoxicity assay was 1.431 µg/mL which can be treated as less activity. Moreover, the extracts showed low to moderate antibacterial activity against both gram-negative and gram-positive bacterial stains (zone of inhibition-10-26 mm). Vibrio Mimicus bacteria stains exhibited the highest level of activity, with a range of 23 for the diameter of the growth inhibition zone. The current review shows leaf extracts of Acmella oleracea may be used as a source of antioxidant and thrombolytic activity, as well as a significant source of antibacterial and anticancer substances. Further research is required to evaluate in-vivo the pharmacological activity of Acmella oleracea leaves in order to identify the essential metabolites and potential mechanisms.

Over the last decades, the coated glass products, and especially the low-emissivity coatings have become a common building material used in modern architectural projects. More recently, these material systems became common in specialized glazing systems featuring solar energy harvesting. Apart from achieving the stability of optical parameters in multilayer coatings, it is also important to have improved control over the design of visual color properties of the coated glass. We prepare metal-dielectric composite (MDC) based multilayer thin-film structures using the RF-magnetron sputtering deposition and report on their optical and chromaticity properties in comparison with these obtained using pure metal-based Dielectric/Metal/Dielectric (DMD) trilayer structures of similar compositions. Experimentally achieved Hunter L, a, b values of MDC-based multilayer building blocks of coatings provide a new outlook on the engineering of future-generation optical coatings with better color consistency and developing approaches to broaden the range of achievable color coordinates and better environmental stability.

In addressing the challenges of data scarcity in biometrics, this study explores the generation of synthetic palmprint images as an efficient, cost effective, and privacy preserving alternative to real-world data reliance. Traditional methods for synthetic biometric image creation primarily involve orientation modifications and filter applications, with no established method specific to palmprints. We introduced the utilization of the “Style-based generator”, StyleGAN2-ADA, from the StyleGAN series, renowned for generating high-quality images. Furthermore, we explore the capabilities of its successor, StyleGAN3, which boasts enhanced image generation, facilitating smooth and realistic transitions. By comparing the performance of StyleGAN3 on public dataset, we aim to establish the most efficient generative model for this purpose. Evaluations were conducted using the SIFT (Scale-Invariant Feature Transform) algorithm into our evaluation framework. Preliminary findings suggest that StyleGAN3 offers superior generative capabilities, enhancing equivariance in synthetic palmprint generation.

Beyond their significant contribution to the dietary and industrial supplies, marine algae are considered to be a potential source of some unique metabolites with diverse health benefits. The pharmacological properties, such as antioxidant, anti-inflammatory, cholesterol homeostasis, protein clearance and anti-amyloidogenic potentials of algal metabolites endorse their protective efficacy against oxidative stress, neuroinflammation, mitochondrial dysfunction, and impaired proteostasis which are known to be implicated in the pathophysiology of neurodegenerative disorders and the associated complications after cerebral ischemia and brain injuries. As was evident in various preclinical studies, algal compounds conferred neuroprotection against a wide range of neurotoxic stressors, such as oxygen/glucose deprivation, hydrogen peroxide, glutamate, amyloid β, or 1-methyl-4-phenylpyridinium (MPP+) and, therefore, hold therapeutic promise for brain disorders. While a significant number of algal compounds with promising neuroprotective capacity have been identified over the last decades, a few of them have had access to clinical trials. However, the recent approval of an algal oligosaccharide, sodium oligomannate, for the treatment of Alzheimer's disease enlightened the future of marine algae-based drug discovery. In this review, we briefly outline the pathophysiology of neurodegenerative diseases and brain injuries for identifying the targets of pharmacological intervention, and then review the literature on the neuroprotective potentials of algal compounds along with the underlying pharmacological mechanism, and present an appraisal on the recent therapeutic advances. We also propose a rational strategy to facilitate algal metabolites-based drug development.

In the manufacturing industry, cutting tool failure is a probable fault which causes damage to the cutting tools, workpiece quality and unscheduled downtime. It is very important to develop a reliable and inexpensive intelligent tool wear monitoring system for use in cutting processes. A successful monitoring system can effectively maintain machine tools, cutting tool and workpiece. In the present study, the tool condition monitoring system has been developed for Die steel (H13) milling process. Effective design of experiment and robust data acquisition system ensured the machining forces impact in the milling operation. Also, ANFIS based model has been developed based on cutting force-tool wear relationship in this research which has been implemented in the tool wear monitoring system. Prediction model shows that the developed system is accurate enough to perform an online tool wear monitoring system in the milling process.

{\bf Abstract.} \\ {\bf Background:} Bangladesh hosts more than 800,000 Rohingya refugees from Myanmar. The low health immunity, lifestyle, access to good healthcare services, social-security cause this population to be at risk of far more direct effects of COVID-19 than the host population. Therefore, evidence-based forecasting of the COVID-19 burden is vital in this regard. In this study, we aimed to forecast the COVID-19 burden among the Rohingya refugees of Bangladesh to keep up with the disease outbreak's pace, health needs, and disaster preparedness. \noindent{\bf Methodology and Findings:} To estimate the possible consequences of COVID-19 in the Rohingya camps of Bangladesh, we used a modified Susceptible-Exposed-Infectious Recovered (SEIR) transmission model. All the values of different parameters used in this model were from the Bangladesh Government’s database and the relevant emerging literature. We addressed two different scenarios, i.e., the best-fitting model and good fitting model with unique consequences of COVID-19. Our best fitting model suggests that there will be good control over the transmission of the COVID-19 disease. At the end of December 2020, there will be only 169 confirmed COVID-19 cases in the Rohingya refugee camps. The average basic reproduction number ($ \mathcal{R}_{0} $) has been estimated to be 0.7563. \noindent{\bf Conclusion:} Our analysis suggests that, due to the extensive precautions from the Bangladesh government as well as other humanitarian organizations, the coronavirus disease will be under control if the maintenance continues like this. Although detailed and pragmatic preparedness should be adopted for the worst scenario.

This experiment was carried out to determine the overall prevalence of pigeon diseases and especially emphasized on prevalence of parasitic diseases in study areas. During this study 45 farms were selected which have >20 pair of pigeon for commercial and >10 pair pigeon for traditional farm in the three study area namely Rajshahi, Natore and Pabna district of Bangladesh. The data were collected from different farm within the study area through a questionnaire and interview schedule with the farm owners. During one year of study period a total Out of 3677 pigeon, positive case in cage of external parasites were 722 and internal parasite positives 114 from 263 fecal sample. The overall prevalence of gastrointestinal and external parasites in pigeon at northern Bangladesh is obtained. The infestation of lice Columbaecula columbae and fly Pseudolynchia canariensis were observed 18.08% and 1.55% respectively. The present study found two species of ectoparasites lice and fly. Diversity of ectoparasite in birds infestation may be depend on many factors, which may include home range, behavior, size and roosting habit of the host. The overall prevalence of gastrointestinal parasites in pigeon are founded that 43.34% in research area. Specific incidence was 22.81% in Ascariasis, 18.63% in Capilariasis and 1.90% in Raillietina parasite in pigeon. Ascaridia colombae is one of the most common (22.81%) helminth species in pigeons in this study. The effect of breed of pigeon observed in present studies the highest in indigenous (63.47%) and lowest exotic (36%) prevalence of gastrointestinal parasite was observed. The specific percentages of Ascariasis, Capilariasis and Raillatina gastrointestinal parasites of pigeon were found 20% & 31.74%; 14% & 30.15% and 2% & 1.58% in exotic & indigenous breed, respectively. In the present study, there is a relation between the occurrence of gastrointestinal parasitic infections with the age of the pigeons which showed that high prevalence in adults (50%) and compare to young (22.22%). but it was statistically significant (P>0.05). In relation with farming system the gastrointestinal parasitic incidence of pigeon was observed in modern and tradition farming system, the highest incidence was 71.16% in traditional & lowest 31.14% in modern farming. When observed specifically in Ascariasis, Capillariasis & Raillietina were 16.39% & 37.41%; 13.11% & 31.25% and 1.63% & 2.5% in modern & traditional, respectively. The effect of regions on the prevalence of gastrointestinal parasites in pigeon was observed in Pabna (68.32%), Natore (57.84%) and Rajshahi (33.33%). The specific percentages of Ascariasis, Capilariasis and Raillatina gastrointestinal parasites of pigeon were 18.18%, 33.33% & 26.31%; 14.54%, 33.33% & 23.38% and 0.606%, 1.66% & 7.89% in Rajshahi, Pabna and Natore, respectively.

Wireless energy harvesting (EH) communication has long been considered a sustainable networking solution. However, it has been limited in efficiency, which has been a major obstacle. Recently, strategies such as energy relaying and borrowing have been explored to overcome these difficulties and provide long-range wireless sensor connectivity. In this article, we examine the reliability of the wireless-powered communication network by maximizing the net bit rate. To accomplish our goal, we focus on enhancing the performance of hybrid access points and information sources by optimizing their transmit power. Additionally, we aim to maximize the use of harvested energy by energy-harvesting relays for both information transmission and energy relaying. However, this optimization problem is complex as it involves non-convex variables and requires combinatorial relay selection indicators optimization for decode and forward (DF) relaying. To simplify this problem, we utilize the Markov decision process and deep reinforcement learning framework based on the deep deterministic policy gradient algorithm. This approach enables us to tackle this non-tractable problem, which conventional convex optimisation techniques would be difficult to solve in complex problem environments. The proposed algorithm significantly improves the end-to-end net bit rate of the smart energy borrowing and relaying EH system by 13.22%,27.57%, and 14.12% compared to the benchmark algorithm based on borrowing energy with an adaptive reward for Quadrature Phase Shift Keying, 8-PSK, and 16-Quadrature amplitude modulation schemes, respectively.

The COVID-19 has caused gigantic negative effects on populace wellbeing, society, education, and the economy in Bangladesh. The aim is to deliver a comprehensive overview of the observed and the possible impacts that could appear in the coming days. The study is based on secondary information. During the early period, due to a lack of accurate facts about the case affected and death tension up-and-down among the nations. The total number of confirmed cases is increasing following geometric patterns in Bangladesh. Dairy farmers, vegetable producers, pharmaceuticals, poultry farmers are in deep crisis due to lower prices. Also, the pandemic has seriously affected educational systems, banking, FDI, ready-made garments, remittances, etc Finally, it is not possible to mitigate the effects of pandemic individually but the integrated effort from the state authority as well as concern people of all sectors need to come forward.

Capital structure decision plays an imperative role in firm’s performance. Recognizing the importance, there has been many studies inspected the rapport of capital structure with performance of firms and findings of those studies are inconclusive. In addition, there is relative deficiency of empirical studies examining the link of capital structure with performance of banks in Bangladesh. This paper attempted to fill this gap. Using panel data of 22 banks for the period of 2005-2014, this study empirically examined the impacts of capital structure on the performance of Bangladeshi banks assessed by return on equity, return on assets and earnings per share. Results from pooled ordinary least square analysis show that there are inverse impacts of capital structure on bank’s performance. Empirical findings of this study is of greater significance for the developing countries like Bangladesh because it will call upon concentration of the bank management and policy makers to pursue such policies to reduce reliance on debt and to accomplish optimal level capital structure. This research also contributes to empirical literatures by reconfirming (or otherwise) findings of previous studies.

Zinc-oxide (ZnO) nanostructures including nanorods are currently considered as a pioneer research of interest world-wide due to their excellent application potentials in various applied fields especially for the improvement of energy harvesting photovoltaic solar cells (PSC). We report on the growth and morphological properties of zinc-oxide (ZnO) nanorods grown on the surface of plain zinc (non-etched and chemically etched) plates by using a simple, economical, and environment-friendly technique. We apply hot water treatment (HWT) technique to grow the ZnO nanorods and varies the process parameters, such as temperature and the process time duration. The morphological, and elemental analysis confirm the agglomeration of multiple ZnO nanorods with its proper stoichiometry. The obtained nanostructures for different temperatures with different time duration showed the variation in uniformity, density, thickness and nanonorods size. The ZnO nanorods produced on the etched zinc surface were found thicker and uniform as compared to those grown on the non-etched zinc surface. This chemically etched Zinc plates preparation can be an easy solution to grow ZnO nanorods with high density and uniformity suitable for PSC applications such as to enhance the energy conversion efficiency of the photovoltaic (PV) solar cells towards the future sustainable green earth.

Estimating peak flow for a catchment is commonly undertaken using the design event method, however this method does not allow for the understanding of uncertainty in the result. This research first presents a simplified method of fragments approach to rainfall disaggregation that ignores the need to consider seasonality, offering a greater diversity in storm patterns within the resulting sub-daily rainfall. By simulating 20 iterations of the disaggregated sub-daily rainfall within a calibrated continuous simulation hydrologic model, we were able to produce multiple long series of stream flow at the outlet of the catchment. With this data, we investigated the use of both the annual maximum and peaks over threshold approaches to flood frequency analysis and found that for a one in 100 year annual exceedance probability peak flow, the peaks over threshold method (333m3/s ±50m3/s) was significantly less uncertain than the annual maximum method (427m3/s ±100m3/s). For the one in 100 year annual exceedance probability, the median peak flow from the peaks over threshold method (333m3/s) produced an outcome comparable to the design event method peak flow (328m3/s), indicating that this research offers an alternative approach to estimating peak flow, with the additional benefit of understanding the uncertainty in the estimation. Finally, the paper highlighted the impact that length and period of streamflow has on peak flow estimation and noted that previous assumptions around the minimum length of gauged streamflow required for flood frequency analysis may not be appropriate in particular catchments.

This study addresses the pressing energy constraints in nations like Bangladesh by proposing the implementation of photovoltaic (PV) microgrids. Given concerns about environmental degrada-tion, limited fossil fuel reserves, and volatile product costs, renewable energy sources are gaining momentum globally. Our research focuses on a grid-connected solar PV system model at Char Jazira, Lalpur, Natore, Rajshahi, Bangladesh. Through PVsyst simulation software, we assess the performance ratio (PR) and system losses, revealing an annual solar energy potential of 3375 MWh at Standard Test Condition (STC) efficiency. After considering losses, the system generates 2815 MWh annually, with 2774 MWh exported to the grid. We analyze an average PR of 78.63% and calculate a levelized cost of energy (LCOE) of 2.82 BDT/kWh [1 USD = 110 BDT]. The financial assessment indicates a cost-effective LCOE for the grid-connected PV system, with an annual gross income of 27744 BDT from selling energy to the grid and operating costs of 64060.60 BDT/year. Remarkably, this initiative can prevent 33074.061 tCO2 emissions over the project’s 25-year lifespan.

In recent years, the utilization of machine learning algorithms and advancements in Unmanned Aerial Vehicle (UAV) technology have marked significant shifts in remote sensing practices. In particular, the integration of machine learning with physical models and their application in UAV-satellite data fusion have emerged as two prominent approaches for estimating vegetation biochemistry. This study evaluates the performance of five machine learning regression algorithms (MLRAs) for mapping crop canopy chlorophyll at the Kellogg Biological Station (KBS) in Michigan, USA, across three scenarios: (1) application to Landsat 7, RapidEye, and PlanetScope satellite images; (2) application to UAV-satellite data fusion; and (3) integration with the PROSAIL radiative transfer model (hybrid methods PROSAIL + MLRAs). The results indicate that the majority of the five MLRAs utilized in UAV-satellite data fusion perform better than the five PROSAIL + MLRAs. The general trend suggests that the integration of satellite data with UAV-derived information, including the normalized difference red-edge index (NDRE), canopy height model, and leaf area index (LAI), significantly enhances the performance of MLRAs. The UAV-RapidEye dataset exhibits the highest coefficient of determination (R2) and the lowest root-mean-square errors (RMSE) when employing kernel ridge regression (KRR) and Gaussian processes regression (GPR) (R2 = 0.89 and 0.89 and RMSE = 8.99 µg/cm2 and 9.65 µg/cm2, respectively). Similar performance is closely observed for the UAV-Landsat and UAV-PlanetScope datasets (R2 = 0.86 and 0.87 for KRR, respectively). For the hybrid models, maximum performance is attained with Landsat data using KRR and GPR (R2 = 0.77 and 0.51 and RMSE = 33.10 µg/cm2 and 42.91 µg/cm2, respectively), followed by R2 = 0.75 and RMSE = 39.78 µg/cm2 for PlanetScope data upon integrating partial least squares regression (PLSR) into the hybrid model. Across all hybrid models, RapidEye data yielded the most stable performance, with R2 ranging from 0.45 to 0.71 and RMSE ranging from 19.16 µg/cm2 to 33.07 µg/cm2. The study highlights the importance of synergizing UAV and satellite data which enables effective monitoring of canopy chlorophyll in small agricultural lands.

Dengue is one of the life-threatening common neglected tropical diseases of the world, yet to develop any therapeutic for its treatment and prevention. Although there is a licensed vaccine reported, but becomes less efficacious due to the presence of multiple serovars of the dengue virus (DENV). Thus, an efficacious dengue vaccine potent to work against all the serovars is very crucial and time-demanding. Here we used a comprehensive hierarchical reverse vaccinology approach to design an epitope-based vaccine, targeted against multiple serovars of the DENV. Conservancy and population coverage analysis of the promiscuous epitopes revealed the robust immune response against multiple serovars of the DENV and various ethnicities. Final vaccine constructs comprising of B and T-cell epitopes, Universal pan-HLA DR or PADRE (AKFVAAWTLKAAA) sequence, and an adjuvant (β-defensin) at N-terminal of the construct with suitable linkers. Physiochemical properties and secondary structure profiling of the vaccine protein secured its hydrophilic, thermostable, and other structural nature. Molecular docking analysis indicates the deep binding of the proposed vaccine in the binding groove of the human immune TLR4 receptor present on the dendritic cell. In addition, disulfide engineering was coped to extend its stability. Furthermore, molecular dynamics simulation of the modeled vaccine-TLR8 complex showed minimum deformability. Finally, in silico cloning approach of the vaccine construct within an expression vector (pET28a+) assure good expression. Proposed vaccine may give novel insights for treatment of dengue patients.

Bangladesh has achieved tremendous progress in the fisheries sector that is making evidential contribution to food security, nutrition and livelihoods. Based on secondary data collected from the Department of Fisheries, Bangladesh and related un-published grey literature, this paper highlights the performance and challenges of the fisheries with emphasis on COVID-19 impact as well as the significance of this sector for achieving the Sustainable Development Goals (SDGs). The total fish production is increased more than six times over the last three decades (7.54 to 43.84 lakh MT) due to the dissemination of improved culture techniques and extension services. Inland closed water contributions have been increasing to 16.24%, while inland open water have declined 10.23% and marine fisheries have dropped 6.27% over the past 18 financial years (2000-2001 to 2018-2019). COVID-19, a major health crisis has also affects various issues associated with aquatic resources and communities. Transportation obstacles and complexity in the food supply, abstraction to start production, labour crisis, sudden illness, poor consumer demand, commodity price hike, creditor's pressure and reduced income were identified as affecting COVID-19 drivers. The combined effect of these drivers poses a significant threat to people’s income (SDG1- eliminate poverty), nutrition (SDG2- erase hunger), food security (SDG3- good health and wellbeing, and SDG12- responsible consumption and production) that demands comprehensive actions. Several recommendations have been elicited, which are important to implement for the achievement of SDGs as well management and imprvement of the aquatic sector (SDG14- life below and SDG16- life above water) .

Measurement of breast cancer burden and identification of its influencing factors help in the development of public health policy and strategy against the disease. This study aimed to examine the variability of the excess mortality of female breast cancer patients in the North East Region of Peninsular Malaysia. This retrospective cohort study was conducted using breast cancer data from the Kelantan Cancer Registry between 2007 and 2011, and Kelantan general population mortality data. The breast cancer cases were followed up for five years until 2016. Out of 598 cases, 549 cases met the study criteria and were included in the analysis. Modelling of excess mortality was conducted using Poisson regression. Excess mortality of breast cancer varied according to age group (50 years old and below vs above 50 years old, Adj. EHR: 1.47; 95% CI: 1.31, 4.09; P=0.004), ethnicity (Malay vs non-Malay, Adj. EHR: 2.31; 95% CI: 1.11, 1.96; P=0.008), and stage (stage III and IV vs. stage I and II, Adj. EHR: 5.75; 95% CI: 4.24, 7.81; P<0.001). In conclusion, public health policy and strategy aim to improve cancer survival should focus more on patients presented at age below 50 years old, Malay ethnicity, and at a later stage.

Human trafficking is the third most lucrative form of trafficking in the world (just behind drugs and counterfeit goods). Multiple outbreaks of unrest between October 2016 and August 2017 in the Rakhine State of Myanmar triggered around 745,000 influxes of Rohingyas crossing into Bangladesh through the border boundaries at Teknaf and Ukhiya sub-districts of Cox’s Bazar. In this regard the media confirmed that over a thousand Rohingya people particularly women and girls were victims of human traffickers. This research aims to explore the underlying cause of human trafficking (HT) during emergency response and seeks how the knowledge and capacity of the refugee, local administration and law enforcement agencies in Bangladesh can be improved in promoting counter trafficking (CT) and safe migration processes. In order to achieve the objectives, this research starts with reviewing acts, rules, policies and action plans of the Government of Bangladesh on the HT, CT and safe migration processes. Then, a case study method has been applied to present ongoing the CT and safe migration programs of a NGO called Young Power in Social Action (YPSA) that received funding and technical support from the International Organization of Migration (IOM) for this purpose, the research in this paper will later evaluate the effectiveness of the program through conducting key informant interviews (KII) and focus group discussion (FGDs) with beneficiary and non-beneficiary participants from refugees, law-enforcing agencies (LEA) and non-governmental organizations’ (NGOs) in Teknaf, and Ukhyia sub-districts in Bangladesh. Thus, this research identified program level strengths and weaknesses in relation to the CT, and safe migration process and provide key directions how they can be improved.

From 2008 to 2024, the Newborn Screening Translational Research Network (NBSTRN), part of the National Institute of Child Health and Human Development (NICHD) Hunter Kelly Newborn Screening Program, served as a robust infrastructure to facilitate groundbreaking research in newborn screening (NBS), rare disease, and genomics. Over fifteen years, NBSTRN developed into a significant international network, supporting innovative research on novel technologies to screen, diagnose, treat, manage, and understand the natural history of more than 280 rare diseases. A key component of these efforts has been the development of resources and expertise for the newborn screening community in ethical, legal, and social issues (ELSI). This paper presents findings from a survey conducted by the NBSTRN team with input from one of theNBSTRN's expert workgroups, the Bioethics and Legal Workgroup. With responses from 88 members of the NBS community including researchers and state NBS programs, the survey found that individuals rely on internal and collegial ELSI resources and highlighted a substantial demand for structured, accessible training and resources. The survey’s insights emphasize the importance of privacy and informed consent in NBS research, and suggested a need for improved collaborative tools and educational programs focused on ELSI for the NBS community. The survey results may inform future efforts in ELSI and NBS research including the development of expanded ELSI tools that leverage digital platforms and consultative services.

This paper reports on the optimization of thin-film coating assisted self-sustainable off-grid hybrid power generation systems for cattle farming in rural areas of Bangladesh. Bangladesh is a lower middle-income country with declining rates of poverty among its 160 million people due to persistent economic growth in conjunction with balanced agricultural improvements. Most of the rural households adopt a mixed farming system by cultivating crops and simultaneously rearing livestock. Among the animals raised, cattle are considered as the most valuable asset for the small/medium-scale farmers in terms of their meat and milk production. Currently, along with the major health issue, the COVID-19 pandemic is hindering the world’s economic growth and has thrust millions into unemployment; Bangladesh is also in this loop. However, natural disasters such as COVID-19 pandemic and floods, largely constrain rural smallholder cattle farmers from climbing out of their poverty. In particular, small and medium-scale cattle farmers face many issues that obstruct them from taking advantage of market opportunities and imposing a greater burden on their families and incomes. An appropriate measure can give a way to make those cattle farmers’ businesses both profitable and sustainable. Optimization of thin-film coating assisted self-sustainable off-grid hybrid power generation system for cattle farming is a new and forward-looking approach for sustainable development of the livestock sector. In this study, we design and optimize a thin-film coating assisted hybrid (photovoltaic-battery-generator) power system by using the Hybrid Optimization of Multiple Energy Resources (HOMER, Version 3.14.0) simulation tool. An analysis of the results has suggested that the off-grid hybrid system is more feasible for small and medium-scale cattle farming systems with long-term sustainability to overcome the significant challenges faced by smallholder cattle farmers in Bangladesh.

The ameliorative effect ethanolic extract of M. oleifera (MO) leaves in combination of curcumin against seizures, cognitive impairment & oxidative stress PTZ-induced kindled rats. Molecular docking was performed to predict the potential phytochemical of MO and curcumin against Epilepsy. The effect of pretreatment with leaves of M. oleifera ethanolic extracts (MOEE) (250, 500mg/kg, orally), curcumin (200 and 300 mg/kg, orally), valproic acid used as standards (100mg/kg) and combined effect of MOEE (250mg/kg) and curcumin (200mg/kg) at low dose, on pentylenetetrazole (PTZ)-induced kindling. For the development of kindling the individual Wistar rats (Male) were injected pentyletetrazole (40 mg/kg, i.p.) on every alternate day. Molecular Docking has been done by AutoDock4.2 tool to merge the ligand orientations in the binding cavity. From the RCSB website, the crystal structure of Human Glutathione reductase (PDB ID: 3DK9) was obtained. Curcumin and MOEE showed dose-dependent effect. The combined effects of leaves of MOEE & curcumin significantly improved the seizure score and decreased the number of myo-clonic jerks in compare with standard dose of valproic acid. PTZ kindling induced a significant oxidative stress and cognitive impairment which was reversed by pretreatment with MOEE & curcumin. Glutathione reductase (GR) is an enzyme, which plays key role in the cellular control of reactive oxygen species (ROS). Therefore, activating GR can uplift the antioxidant property, which leads to the inhibition of ROS induced cell death in brain. The combination of ethanolic extract of M. oleifera (MOEE) leaves and curcumin have shown better result than any other combination for antiepileptic effect by virtue of antioxidant effects. As per docking study showed that the chloro-genic acid and quercetin is treated with the combination of curcumin can be much more potential.

A crucial component for developing an automated speaker or speech recognition system is voice preprocessing, which filters unwanted noise and detects the speech part. This study aimed to develop a computerized model to remove background noise and improve signal quality for future applications. This model was developed on a large longitudinal dataset containing varying real-world noise and validated on both a public dataset and a locally collected test dataset in different environments. An overall voice pre-processing pipeline is presented in this study, including denoising, segmentation, feature extraction, and ease of storage. The backbone of the denoising model is a Kalman filter, where the parameters were obtained from a grid search method; the signal-to-noise ratio (SNR) was used as the performance metric. Also, the segmentation was done to remove the pauses from the audio signal before the feature extraction. Finally, the data was stored as a template with the most common features. The SNR result suggested that the Kalman filter-based proposed method performed successfully across diverse datasets. Thus, this model provides a robust and adaptable solution for real-world scenarios and also ensures the data storing quality for future applications.

The paper portrays predictive models for dissolved oxygen (DO) levels in an urban lake using common water quality parameters like Temperature, pH, Conductivity and ORP at a time. Data were sampled using three real-time, industry-standard sensors, OPTOD, CTZN, and PHEHT, and then interpolated using the ArcGIS kriging technique. Correlation studies were analyzed through the ML algorithm, the correlation study signified a highly positive correlation between DO and other water parameters and the model was corroborated by R-score in order to create the linear regression model. In addition, an artificial neural network- a machine learning method using the Levenberg-Marquardt algorithm was developed to build a model to predict the do as well. Then, the performance of the models was validated and also the R² accuracy was checked of the predicted data against the actual data. Thus, the appropriateness of the ANN model for the forecasting of investigated attributes is indicated by the fact that the discrepancy between the forecasted and real ANN model is significantly lesser than that of the regression model. However, the model can be used to reveal DO data from unknown urban lake water.

Globally, the demand for plant-based alternative food is increasing rapidly as these products are getting quite popular in vegan and vegetarians. However, it is still in the early stage and faces various technological challenges, but the imitation of sensory profile is the most challenging part as the products are meant to be an alternative of meat. The development of similar product to meat requires an accurate selection of ingredients and processing. An understanding about the sensory profile can help to construct the product and technologies that are consumer centric and sustainable. In this review, we focus on the comparative differences in the sensory profile of animal meat and plant-based meat alternative specially in the color, texture and flavor, along with the method used to resemble them. The paper also explains about the sensory evaluation and how it affects the consumer preference and acceptability. Additionally, a direction to further research for developing better plant-based alternative products has also been suggested.

Bangladesh's railway system mostly uses typical manual railway crossing technique or boom gates through its 2,955.53 km rail route all over the country. The accidents are frequently happening in the railway crossings due to not having obstacle detectable and quickly operating gate systems, and also for fewer safety measures in the railway crossing. Currently, there are very few automatic railway crossing systems (without obstacle detectors) available, however, all of them are dependent on the national power grid without a backup plan for any emergency cases. Bangladesh is still running a bit behind in the power generation of its consumption, hence it is not possible to have a continuous power supply at all times all over the countryside. We aim to design and develop a smart railway crossing system with an obstacle detector to prevent common types of accidents in the railway crossing points. We design to use two infrared (IR) sensors to operate the railway crossing systems which will be controlled by the Arduino Uno. This newly designed level crossing system will be run with the help of sustainable renewable energy which is cost-effective, eco-friendly, and apply under the national green energy policy towards achieving sustainable development in Bangladesh as a part of the global sustainable goal to face climate change challenges. We have summarized the simulated results of several renewable energy sources including a hybrid system and optimized the Levelized Cost of Energy (LCOE), and the payback periods.

An opinion dependent cross sectional survey was conducted among charland peoples of Noakhali, Bangladesh with a view to identify the factors that affect green economy. Nijhumdwip Island and Tamaruddi union are highly affected by cyclone and soil salinity. Unpredictable rainfall is the most acute in Nijhumdwip. Lack of information the main problem in Nijhumdwip Island. Farmers are found less interest in integrated farming and crop diversification. Few farmers from Sonadia Union are involved in homestead gardening. Regression analysis have shown a negative relationship (p<0.001) between education of stockholders and decrease of crop production. On the other hand education level of stockholders is to be found positively (p<0.05) varied with decrease of food insecurity. So it can be said that educated farmers are more adaptive against climate change.

To estimate the recreational value provided by the Foy’s Lake annually using the most applicable model for on-site data is the main objective of this study. Adhere to the objective of this study; Individual Travel Cost Method (ITCM) has been applied and Zero Truncated Poisson Regression Model has been found plausible among other models to estimate consumer surplus. Based on the findings of the study, an estimate of the consumer surplus or recreational benefits per trip per visitor can be recommended as BDT 5,875 or US $ 73.44 and counting the consumer surplus per trip per visitor, the annual recreational value (total consumer surplus) provided by the lake is found to be BDT 321 million or US $ 40.2 million.

Background: The practice of self-medication is common worldwide and is an important component of medical self-care. However, the practice can be dangerous and is linked to various risks for the patients and the entire community. This study aimed to estimate the prevalence and factors associated with self-medication among Bangladeshi adults. Methods: A cross-sectional survey was conducted between April and June 2021 among Bangladeshi adults (aged &gt;19 years) using convenient sampling. A total of 1320 data were collected through face-to-face interviews using a standardized questionnaire. Multivariable logistic regression analysis was used to identify factors associated with self-medication practice (SMP). Results: Overall, 41% of adults in our survey reported SMP. The most common illnesses that prompted SMP were common cold/flu (66.4%), gastric problems (65%), and headache (64.4%). The most frequent reasons for SMP were to get better services (30.59%), perceive SMP without side effects (23.28%), and save time with effectiveness (14.56%). Potential risk factors included 10 years (AOR = 1.91; 95% CI: 1.04 - 3.50) and &gt;12 years of schooling (AOR = 5.03; 95% CI: 2.27 - 11.15), being a businessman (AOR = 4.64; 95% CI: 1.74 - 12.37), having ≤6 family members (AOR = 2.13; 95% CI: 1.40 - 3.24), being a member of a social group (AOR = 1.53; 95% CI: 1.10 - 2.12), a health status check after every six months (AOR = 1.52; 95% CI: 1.08 - 2.13), and current ill-health (AOR = 1.41; 95% CI: 1.06 - 1.87). Protective factors identified included ≤30 years of age (AOR = 0.40; 95% CI: 0.17 - 0.93), and practice of modern (AOR = 0.39; 95% CI: 0.22- 0.69) and herbal (AOR = 0.45; 95% CI: 0.21- 0.97) healing types. Conclusion: More than one-third of the study participants reported practicing self-medication. Increasing the community’s awareness of the extreme consequences of SMP and not just the average experience might sway individuals away from SMP, and implementing strict jurisdiction could be a way to minimize the SMP.

In this work, kinetics of the reaction between 5,10,15,20-tetrakis(N-methylpyridium-4-yl)porphyrin and Ni2+ species were investigated in aqueous solution at 25 ±1 ºC in I = 0.10 M (NaNO3). Speciation of Ni2+ was carried out in I = 0.10 M (NaNO3) in order to provide the distribution of the Ni2+ species with different solution pH. The experimental data have been compared with the speciation diagram constructed from the values of hydrolysis constants of Ni2+ ion. Speciation data showed that the hexaaquanickel(II), [Ni(H2O)6]2+, ions take place in hydrolysis reactions through formation of [Ni(OH2)6-n(OH)n]2-n species with solution pH. Based on the speciation of Ni2+ and pH dependent rate constants, rate expression can be written as: d[Ni(TMPyP)4+]/dt = (k1[Ni2+(aq)] + k2[Ni(OH)+(aq)] + k3[Ni(OH)2o(aq)] + k4[Ni(OH)3-(aq)])[H2TMPyP4+], where k1, k2, k3 and k4 were found to be k1 = (0.62 ± 0.22) × 10-2; k2 = (3.60 ± 0.40) × 10-2; k3 = (2.09 ± 0.52) × 10-2, k4 = (0.53 ± 0.04) × 10-2 M-1s-1 at 25 ±1 °C, respectively. Kinetic results showed that monohydroxo, [Ni(H2O)5(OH)]+, is the most reactive among the [Ni(OH2)6-n(OH)n]2-n species. The enhanced reactivity has been ascribed to the formation of hydrogen bonding between oxygen atom of hydroxyl group of the [Ni(H2O)5(OH)]+ species and the pyrrolic hydrogen atom of the [H2TMPyP]4+. The rate of formation of [Ni(II)TMPyP]4+ complex was to be 3.99 × 10-2 M-1s-1 in I = 0.10 M, NaNO3 (25 ± 1 ºC). Ionic strength effect on the reaction rate is suggested that the net charge of the tetracationic porphyrin is to be +3.6 on the basis of Brønsted-Bjerrum equation. The UV-Vis and fluorescence data revealed that [Ni(II)TMPyP]4+ and H2(TMPyP)4+ interact with DNA, and UV-Vis results suggest that Ni(II)-porphyrin and free base porphyrin interact with DNA via outside binding with self-stacking and intercalation, respectively. Mechanism of kinetics of formation of the [Ni(II)TMPyP]4+ complex in aqueous medium is discussed. An investigation of application of the [Ni(II)TMPyP]4+ complex along with other metalloporphyrins such as Zn2+-, Ru2+-, Pt2+-, [Au(III)TMPyP]5+ as anti-COVID-19 agents is now in progress under international collaboration.

The wetlands in northeastern Bangladesh are home to some of the most prolific and valuable ecosystems on the planet, offering a wide range of benefits to both the local and wider communities. A limited number of research on this topic have been carried out in various wetlands in coastal hilsa, but none have been located in the northeastern region of Bangladesh. Thus, the goal of this study was to better understand the most commercially relevant species (anadromous hilsa) in northeastern Bangladesh as well as to assess the wetland ecosystem services more thoroughly with the contribution of their fish genetic resources. In addition to laboratory studies, fieldwork was done in the fishing settlements along the Surma River, Hakaluki Haor, and Tanguar Haor. The study classified 77 fish species into 21 subcategories of ecosystem services, of which 56% were not threatened, 17% were vulnerable, and 10% were highly endangered. The species Hilsa was found to be the most economically significant, accounting for 1% of the GDP overall. The study determined if the hilsa stock of the examined wetlands maintains a single or several subpopulations in comparison to other parts of the country when they migrate from saline water to northeastern Bangladesh (freshwater). But when compared to other groups, the FST score was between 0.000 to 0.017, indicating that the populations are identical and that there is genetic material sharing between them. Additionally, these statistics imply that the Sylhet haor and adjacent river systems contain a single stock of Hilsa fish. Nevertheless, a number of stresses and risks, including overexploitation, illicit and destructive fishing, siltation, and natural disasters like flash floods, have been linked to changes in the supply of hilsa and other ecosystem services. This study also emphasizes the necessity of policy attention and research to address the concerns.

One of the major concerns in structural health management (SHM) is the early detection of a growing crack. Using this, future damage due to crack propagation can be mitigated or eliminated by implementing proper repair and maintenance. Acoustic Emission (AE) is a non-destructive testing (NDT) method with potential applications for locating and monitoring fatigue cracks. The research presented in this paper focuses on SHM using AE. A novel AE signal analysis approach was proposed in order to detect crack initiation and assess small crack lengths. Experimental investigation indicated that initiation of a crack could be identified through the statistical analysis of the resulting features of the AE signals. A probabilistic AE-based model for small fatigue crack sizing was developed and the uncertainties of the model were estimated. In addition, a probabilistic model validation approach was implemented to confirm accurate estimation of the results. The outcome of this research can be used to evaluate the integrity of structures under fatigue loading. The proposed approach can also be applied as an approach to manage health and assess prognosis of structures.

Molecular dynamics(MD) simulations are playing an increasingly important role in structure-based drug discovery (SBDD). Here we review the use of MD for proteins in aqueous solvation, organic/aqueous mixed solvents (MDmix) and with small ligands, to the classic SBDD problems: binding mode and binding free energy predictions. The simulation of proteins in their condensed state reveals the solvent structure and preferential interaction sites (hot spots) on the protein surface. This information is largely transferable across all classes of protein ligands (from water to drugs) and can be used very effectively to understand ligand recognition and improve the predictive capability of well-established methods such as molecular docking. MD simulations for protein and drug or drug-like compounds are now being used but are still computationally expensive and can only be applied to specific cases. On the other hand, MDmix simulations can now be used in SBDD and we will describe the latest developments and implementations. We expect to see an increase in the application of these techniques to a plethora of protein targets to identify new drug candidates with the advent of new tools and faster computers.

Transporter associated with antigen processing 1 (TAP1) gene codes for a transporter protein, which is responsible for tumor antigen presentation in the MHC I or HLA complex. A defect in the gene results in an inadequate tumor tracking. TAP1 may also influence multi drug resistance, which is an extreme threat in providing treatment by drugs which are chemotherapeutic. The gene of TAP1 was analyzed bioinformatically. It gave us prognostic data as a confirmation of whether it should be used as a biomarker. The expression level and pattern analysis were conducted using ONCOMINE, GENT2 and GEPIA2 online platforms. Samples with different clinical outcomes were investigated for expression and promoter methylation analysis was done in cancer vs normal tissues using UALCAN. The copy number alteration and mutation frequency and expression in different cancer studies were analyzed using cBioPortal. The PrognoScan and KM plotter survival analysis of significant data (p-value<0.05) was representing graphically. Pathway and Gene ontology analysis of gene correlated to TAP1 gene was presented using bar charts. After arranging the data in a single panel and correlating expression to prognosis, understanding mutational and alterations and comparing pathways, TAP1 may be a potential novel target to evade a threat against chemotherapy and the study gives new aspects to consider for immunotherapy in human breast, lung, liver and ovarian cancer.

MPC (Magneto-Photonic Crystal) Optimisation is a feature-rich Windows software application designed to enable researchers to analyze the optical and magneto-optical spectral properties of multilayers containing gyrotropic constituents. A set of computational algorithms aimed at enabling the design optimization and optical or magneto-optical (MO) spectral analysis of 1D magnetic photonic crystals (MPC) is reported, together with its Windows software implementation. Relevant material property datasets (e.g., the optical spectra of refractive index, absorption, and gyration) of several important optical and MO materials are included, enabling easy reproduction of the previously published results from the field of MPC-based Faraday rotator development, and an effective demonstration-quality introduction of future users to the multiple features of this package. We also report on the methods and algorithms used to obtain the absorption coefficient spectral dispersion datasets for new materials, for which the film thickness, transmission spectrum, and refractive index dispersion function are known.

The main objective of this paper is to continue the development of activities of basic and applied research related to wind energy and to develop methods of optimal control to improve the performance and production of electrical energy from wind. A new control technique of Double fed induction generator for wind turbine is undertaken through a robust approach tagged nonlinear sliding mode control (SMC) with exponential reaching law control (ERL). The SMC with ERL proves to be capable of reducing the system chattering phenomenon as well as accelerating the approaching process. A nonlinear case numerical simulation test is employed to verify the superior performance of the ERL method over traditional power rate reaching strategy. Results obtained in Matlab/Simulink environment show that the SMC with ERL is more robust, prove excellent performance for the control unit by improving power quality and stability of wind turbine.

Risedronate sodium (RIS) possesses very low bioavailability and several adverse effects in the gastrointestinal tract when administered through an oral route. Thus, this necessitates the need to develop novel formulation. Hence, we had developed RIS-HA-TCS loaded mPEG coated nanoparticles for the treatment of osteoporosis. Chitosan was used to synthesize thiolated chitosan and its characterization was done using DSC and FTIR. Ellman's reagent was used to measure the degree of thiol immobilization. The RIS-HA fabrication was done and was further conjugated with the synthesized TCS. The Box-Behnken design process was used for designing fifteen batches of RIS-HA-TCS nanoparticles, which were formulated by ionic gelation procedure in which tripolyphosphate (TPP) was used as a crosslinking agent. Moreover, RIS and RIS-HA-TCS in-silico activity was compared for farnesyl pyrophosphate synthetase enzyme. The obtained results revealed that the binding affinity of RIS was much more than the conjugated RIS. Successful docking results paved the way for thiolation of chitosan with RIS. The drug entrapment efficiency (%EE), particle size and Polydispersity index (PDI) of RIS-HA-TCS nanoparticles obtained were 85.4 ±2.21%, 252.1 ±2.44 nm and 0.2± 0.01 respectively. The particle size, PDI, and encapsulation efficiency of RIS-HA-TCS were reported to be 264.9 ±1.91 nm, 0.120± 0.01, and 91.1 ±1.17%, respectively, after being further conjugated with mPEG. TEM showed the spherical particle size of RIS-HA-TCS and RIS-HA-TCS-mPEG. The in-vitro release of RIS-HS-TCS-mPEG was found to be significantly higher (95.13±4.64%) as compared to RIS-HA-TCS (91.74 ± 5.13%), RIS suspension (56.12 ± 5.19%) and marketed formulation (74.69 ± 3.98%). In an ex-vivo gut permeation study, RIS-HA-TCS-mPEG nanoparticles was found to have an apparent permeability of 0.5858×10-1 cm/min which was better than the apparent permeabilities of RIS-HA-TCS formulation (0.4011 ×10-4cm/min), RIS suspension (0.2005 ×10-4 cm/min) and marketed preparation (0.3401 ×10-4 cm/min)..

A developed six-port reflectometry (SPR) system was integrated to measure the relative permittivity of tumor and normal breast tissue for medical diagnostic purpose. In order to obtain an accurate and precise measurement, the calibration process was done to the SPR using the well-known three-standard technique. Next, the studied dielectric probe was connected to the calibrated measurement-port of the SPR. The open end of the probe aperture was dibbed into the normal and tumor synthetic breast tissue samples to measure the synthetic breast tissues dielectric constant, ɛrʹ, and loss factor, ɛrʺ in the frequency range of 1.5 GHz to 3.3 GHz. Finally, the comparative studies were conducted between commercial VNA with Keysight 85070E dielectric probe and the studied SPR-probe system based on the measured magnitude of the reflection coefficient, phase shift, dielectric constant, and loss factor of the synthetic breast samples. The maximum absolute errors of the measured reflection coefficient magnitude, phase shift, dielectric constant, and loss factor were found to be 0.01, 1.07°, 1.12, and 0.75, respectively. It was ascertained that the predicted dielectric constant, ɛrʹ, is able to differentiate between normal, (ɛrʹ &lt; 50) and tumor, (ɛrʹ &gt; 50) breast tissues.

Background: The UNHLM pledged to enroll 30 million in TB preventive treatment (TPT) by 2022, necessitating TPT expansion to all at TB risk. We assessed uptake and completion of a 12-dose, weekly isoniazid-rifapentine (3HP) TPT regimen. Methods: Between February 2018 - March 2019 in Dhaka, community-based TPT using 3HP targeted household contacts of 883 confirmed drug-sensitive pulmonary TB patients. Adhering to WHO guidelines, contacts underwent active TB screening before TPT initiation. Results: Of 3,193 contacts who advised health facility visits for screening, 67% (n=2,149) complied. Among these, 1,804 (84%) received chest X-rays. Active TB was diagnosed in 39 (2%) contacts; they commenced TB treatment. Over 97% of 1,216 contacts began 3HP TPT, with completion rates higher among females, those with more education and income, non-slum residents, and those without 3HP-related adverse events. Adverse events, mainly mild, occurred in 5% of participants. Conclusions: The 3HP weekly regimen, with its short duration, self-administered option, and minimal side effects, achieved satisfactory completion rates. A community-focused 3HP TPT approach is feasible, scalable nationally, and aligns with UNHLM targets.

This research introduces a pioneering solution to the challenges posed by gastrointestinal tract (GI) cancer in radiation therapy, focusing on the imperative task of precise organ segmentation for minimizing radiation-induced damage. GI imaging has historically used manual demarcation, which is laborious and uncomfortable for patients. We address this by introducing the ResECA-U-Net deep learning model, a novel combination of the UNet and ResNet34 architectures. Furthermore, we further augment its functionality by incorporating the Efficient Channel Attention (ECA-Net) methodology. By utilizing data from the UW-Madison Carbone Cancer Centre, we carefully investigate several image processing techniques designed to capture critical local characteristics. With its foundation in computer vision concepts, the ResECA-U-Net model is excellent at extracting fine details from GI images. Sophisticated metrics such as intersection over union (IoU) and the dice coefficient are used to evaluate performance. Our study's outcomes demonstrate the effectiveness of the suggested method, yielding an impressive 96.27% Dice coefficient and 91.48% IoU. These results highlight the significant contribution that our strategy has made to the advancement of cancer therapy. Beyond its scientific merits, this work has the potential to significantly enhance cancer patients' quality of life and provide better long-term outcomes. Our work is a significant step towards automating and optimizing the segmentation process, which can potentially change how GI cancer is treated completely.

Introduction: Young adults are the second largest segment of the immigrant population in the United States (US). Given recent trends in later age of initiation of tobacco use, we examined variation in use of tobacco products by nativity status for this population group. Methods: Our study included young adults 18-30 years of age sampled in the National Health Interview Survey (2015-2019), a nationally representative sample of the US population. We calculated prevalence of use of any and 2 or more tobacco products (cigarettes, cigars, pipes, e-cigarettes, and smokeless tobacco) for foreign-born (n=3,096) and US-born (n=6,811) young adults. Logistic regression models adjusted for age, sex, race-ethnicity, education, and poverty, while accounting for the complex survey design. Results: Foreign-born young adults were significantly less likely to use any tobacco product (Cigarette = 7.3% vs 10.7%; Cigar= 1.8% vs 4.8%; E-cigarette= 2.3% vs 4.5%, respectively; p<0.01) or poly tobacco use (1.9% vs. 4.2%; p<0.01) than US-born young adults. Adjusted regression models showed lower odds of poly tobacco use among the foreign-born than their US-born counterparts (Odds Ratio = 0.41, (95% Confidence Interval: 0.26-0.63)). Conclusion: Findings highlight the importance of targeted interventions by nativity status and further tobacco prevention efforts needed for the US-born.

A study of photovoltaic solar window technologies is reported, focusing on their structural features, functional materials, system development, and suitability for use in practical field applications, e.g. public infrastructures and agricultural installations. Energy generation performance characteristics are summarized and compared to theory-limit predictions. Working examples of pilot-trial solar window-based installations are described. We also report on achieving electric power outputs of about 25 W_p/m² from clear and transparent large-area glass-based solar windows.

In the age of next-generation computer, the role of the cloud, the internet and smart devices will become stronger. These days we all know the word smart well. This word is often used in our daily lives. The Internet of Things (IoT) will generate a variety of information from a variety of resources. It can store big data in the cloud. Fog computing acts as a signal between cloud and IoT. Fog extensions in this framework apply to material under IoT. IoT devices are called Fog nodes, which can be accessed anywhere within the network range. A blockchain is a novel way of recording in a secure sequence. Creating a new framework in the development of Internet of Things is one of the critical problems of wireless communication where solving such a problem can lead to continued growth in the use and popularity of IoT. Proposed research creates a framework for providing a framework for middleware on the internet of smart devices network for the internet of things using blockchains technology. Our great offering connects new research that integrates blockchains into the Internet of Things and provides secure Internet connection for smart devices. Blockchain (BC) Internet of Things (IoT) is a new technology that works with low-level, distributed, public and real-time leaders to maintain transactions between IoT sites. A blockchain is a series of blocks, each block being linked to its previous blocks. All blocks have cryptographic hash code, previous block hash, and its data. Transactions in BC are the basic components used to transfer data between IoT nodes. IoT nodes are a variety of portable but smart devices with embedded sensors, actuators, systems and the ability to communicate with other IoT nodes. The role of BC in IoT is to provide a process for processing secure data records using IoT nodes. BC is a protected technology that can be used publicly and openly. IoT requires this type of technology to allow secure communication between IoT nodes in different environments. Events in BC can be tracked and monitored by anyone who is certified to communicate within IoT.

The mHealth is a term that is used for mobile health supported by smart devices such as mobile phones, tablets, and wearable smart devices, etc. The smart devices strengthen the efficiency and effectiveness of interaction with patients, physicians, and specialists. Patients nowadays would like to be intimately involved in their diagnosis as well as to make more informed decisions concerning their care. It has begun to measure the success of the quality of treatment. This was a reason that patients trust mHealth to provide them with consistency in their communications with the physicians. Most wireless strategies do not measure up to this standard so that patient engagement ultimately ended up decreasing. The blockchain can boost mHealth through storing and sharing electronic data securely and transparently. It can enhance the accessibility of patient information in real-time. The Internet of Things (IoT) provides a unique identification number to every connected device such as mobile devices, medical devices, and wearable devices. This framework uses the blockchain and IoT technologies together to provide quick help to the patients, monitor remotely, reduce the cost and unnecessarily hospitalization physically and find the real diagnosis. In order to increase patient involvement, mHealth framework with blockchain and IoT technologies has built with the key objective of providing patients with full information on their treatment and diagnosis.

We present a review of the current state of the field for a rapidly evolving group of technologies related to solar energy harvesting in built environments. In particular, we focus on recent achievements in enabling the widespread distributed generation of electric energy assisted by energy capture in semi-transparent or even optically clear glazing systems and building wall areas. Whilst concentrating on the cutting-edge recent results achieved in the integration of traditional photovoltaic device types into novel concentrator-type windows and glazings, we compare the main performance characteristics reported with these achievable using more conventional (opaque or semi-transparent) solar cell technologies. A critical overview of the current status and future application potential of multiple existing and emergent energy harvesting technologies for building integration is provided.

Amorphous ferrite-type rare-earth (RE) substituted garnets and garnet-oxide nanocomposite layers are prepared on clear glass substrates by using RF magnetron sputter-deposition process. By using a combination approach employing custom-built spectrum-fitting software in conjunction with Swanepoel’s envelope method, the spectral dispersion function of optical constants and the layer thicknesses are derived accurately from the transmission spectra of the as-deposited samples. The effects of excess metal-oxides added to the base material systems during the co-deposition process are found to affect the refractive index and the optical absorption coefficients of garnet-oxide composites. A number of optical constant datasets are presented, enabling the experimentalists to design nanophotonic or integrated-optics devices employing these functional materials.

Currently, the COVID‐19 has directly affected the millions of humans lives. The symptoms of the disease involving fever, malaise, chest infection, and breathing difficulties, were identified, and its existence is continuously becoming restructured. The World Health Organization (WHO) had mentioned the wide diagnostics test besides COVID-19 that would also assist medical facilities to recognize infectious diseases as well as currently focusing efficiently on preventing and afterward defeating this viral disease. The infection is usually transmitted among human beings in direct contact, greatest through the liquid bubbles generated through cough, sneeze, or speaking. This paper reviews the COVID 19 pandemic, its history, current updates, contact tracing applications, and use of emerging technologies like the Internet of Things (IoT) and Blockchain for stopping the spreading and provide service online to the patient from a distance.

Online class now is the demand of the day as little scopes are to find out alternatives to online class in these unprecedented days caused by corona pandemic across the globe. The study was qualitative in approach and data were collected from secondary sources i.e. different newspapers and journals in the recent times along with a mini interview with students of private universities studying in different subjects over mobile phone by the researcher. Findings of the study show that though online education has a number of challenges faced by two main stakeholders; students and teachers, handling all these challenges carefully can have the chance to create a positive atmosphere in the field of education as an alternative teaching learning resulting in positive outcomes in all regards.

Blockchain (BC) in the Internet of Things (IoT) is a novel technology that acts with decentralized, distributed, public and real-time ledger to store transactions among IoT nodes. A blockchain is a series of blocks, each block is linked to its previous blocks. Every block has the cryptographic hash code, previous block hash, and its data. The transactions in BC are the basic units that are used to transfer data between IoT nodes. The IoT nodes are different kind of physical but smart devices with embedded sensors, actuators, programs and able to communicate with other IoT nodes. The role of BC in IoT is to provide a procedure to process secured records of data through IoT nodes. BC is a secured technology that can be used publicly and openly. IoT requires this kind of technology to allow secure communication among IoT nodes in heterogeneous environment. The transactions in BC could be traced and explored through anyone who are authenticated to communicate within the IoT. The BC in IoT may help to improve the communication security. In this paper, I explored this approach, its opportunities and challenges.

The COVID-19 is an exponentially growing disease that has intentioned nations to use technologies to detect the coronavirus infection. Several nations are working greatly to fight against COVID-19. Many nations have been using a range of devices to combat the pandemic, seeking information about growth, monitoring as well as the leaking the confidential information of the residents. This research aims to assist infected people online using the Internet of Things (IoT) and Blockchain technologies through smart devices. IoT-based healthcare devices gather useful information, provide additional insight through symptoms and behaviors, allow remote monitoring, and simply give people better self - determination and healthcare. Blockchain allows the secure transfer of patient health information, regulates the medical distribution network. A four-layer architecture is proposed using IoT and Blockchain to detect and prevent individuals to be COVID 19. This research provides a framework for patients with COVID-19 infectious disease and recognizes health issues and diagnoses online. Smart devices such as smartphones can install any mobile apps such as Aarogya Setu, Tawakkalna, and so on. These applications can track COVID-19 patients properly. The installation of mobile apps on smart devices focuses to reduce the time and cost and increase the performance of the infectious patient's condition. A four-layer architecture is proposed using IoT and Blockchain technologies. Many research works focus on investigating, analyzing, and highlighting the affected individuals through guiding the COVID-19 infection. Eventually, various mobile apps are recognized and addressed in this paper.

Despite the expansion of financial institutions and proliferation of mobile financial services, reaching the unbanked and bringing them under formal financial services has become a policy concern in many developing countries. Due to the lack of financial accounts, unbanked people prefer informal, risky, and inconvenient mechanisms for receiving, sending and transferring money. Previous studies rely much on common intervention like no account maintenance and opening fees, easy documentation processes and money subsidies for opening financial accounts. This study aims to examine the impact of the motivational workshop on opening savings accounts through causality among the unbanked people in a setting where the respondents are unbanked despite having all the requirements and many institutional offers for opening savings accounts. We encouraged the unbanked people through a one-hour-long motivational workshop to open saving account. Based on our cross-sectional data and randomized controlled trial experiment among 505 unbanked Village Defense Party (VDP) members at Dhubil Union under Sirajganj in Bangladesh, we have the evidence that motivational workshop positively impacts opening ac-counts by 32.33 percent. However, the account opening rate differs in terms of respondent’s pref-erence for financial institutions. Our study also finds that unbanked people have the highest pref-erence for mobile financial services for opening accounts resulting in 15.33 percent. The result of the study has some policy implications for adopting effective strategies of financial access in many developing countries.

Data integrity and security are among the most essential things in this digital era performance. Digital certificates can be one solution to this problem. This research will develop the architecture of digital certificate verification and validation using blockchain. The blockchain concept for digital certificates uses three stages: requirements planning, workshop design, and implementation. Digital certificate files will be tested based on a scenario in which there could be any changes to those files, such as compressing files, changing data of files, inserting images in the file, and rotating files. This system architecture will detect any changes that could occur to the digital certificate file by using a digital signature, Keccak256 hash algorithm, and blockchain. This research shows that change detection accuracy for digital certificate files is 100%. However, there is a digital signature nature that could reduce the accuracy of change detection, and several solutions can be resolved. The average time to generate a signature using blockchain technology is 2.11 seconds, faster than 3.23 seconds when it does not use blockchain. The average time to validate a signature is 2.11 seconds without using blockchain, which is reduced to 0.22 seconds using blockchain technology. This research concludes that the architecture for digital certificate verification and validation using blockchain technology has successfully improved the security of digital certificates. Testing showed that even minor changes to a digital certificate could affect the signature, ensuring the certificate's integrity. For further research, evaluating the performance of various hash algorithms within the blockchain network is recommended.

Background: Oral cancer (OC) is serious health concerning issue that has a high fatality rate. The oral cavity has seven kinds of OC, including the lip, tongue, and floor of the mouth, as well as the buccal, hard palate, alveolar, retromolar trigone, and soft palate. The goal of this study is to look into new biomarkers and important pathways that might be used as diagnostic biomarkers and therapeutic candidates in OC. Methods: Publicly available repository the Gene Expression Omnibus (GEO) was responsible to collect OC-related datasets. GSE74530, GSE23558, and GSE3524 microarray datasets were collected to apply analysis. Minimum cut-off criteria of |log fold-change (FC)| > 1 and adjusted p < 0.05 were applied to figure out the up-regulated and down-regulated differential expression genes (DEGs) from the three datasets. After that only common DEGs in all three datasets were collected to apply further analysis. Gene ontology (GO) and Pathway analysis were implemented to explore the functional behaviors of DEGs. Then protein-protein interaction (PPI) networks were built to identify the most performed genes, clustering algorithm was also implemented to identify complex parts of PPI. TF-miRNA networks were also constructed to study deeply about OC-associated DEGs. Finally, top gene performers from PPI networks were used to apply drug signature analysis. Results: After applying filtration and cut-off criteria 2508, 3377, and 670 DEGs were found for GSE74530, GSE23558, and GSE3524 respectively, and 166 common DEGs were found in every dataset. The GO annotation remarks that most of the DEGs were associated with the terms of type I interferon signaling pathway. The pathways of KEGG reported that the common DEGs are related to the Cell cycle and Influenza A. The PPI network holds 88 nodes and 492 edges and CDC6 had the highest number of connections. 4 clusters were identified from the PPI. Drug signatures doxorubicin and resveratrol showed high significance according to the hub genes. We anticipate that our bioinformatics research will aid in the definition of the pathophysiology and the development of new therapies for OC.

At present, the world is now passing a very far different time than normal situation due to the COVID-19 pandemic crisis. The global life-style and human civilization is currently progressing with down-stream that affecting almost every sectors necessary for human civilizations except the current environmental situation. To control the COVID-19 spreading, most of the countries are following lockdown process that reduces human mobility, thus reducing the CO2 emission to the environment. Though the COVID-19 pandemic is a blessing for the present environment, however, the post-COVID world will face a massive thrust of energy and only conventional energy resources may not be enough to mitigate the energy demands. Solar power generation technology mainly the photovoltaic (PV) systems and their advancement can be the leading possibilities to minimize the gap between the power demand and generation. It is now time to think how we can improve the PV power generation in future and the post-COVID world. In this encyclopaedia communication, we report on Nano-technological approach to improve the conversion efficiency of GaAs solar cells. We have designed and optimized several types of nano-structured assemblies that can be implemented to reduce the front surface incident light reflection losses thus can assist to improve the conversion efficiency of GaAs solar cells.

This article examines the wavelet transforms and the machine learning methods in accelerating large eddy simulations of turbulent flows. An overarching challenge of large eddy simulations is to accurately represent the cascade of kinetic energy across the cut-off length scale. Taylor hypothesis suggests that the energy cascade occurs through the process of vortex stretching. However, Richardson hypothesis assumes the self-amplification of the strain field and a hierarchical break down of large eddies lead the energy cascade. The large eddy simulations typically employs the self-amplification of the strain in formulating subgrid models. However, several studies also proposed subgrid models based on vortex stretching. The wavelet-based coherent vortex simulation of turbulence directly accounts for vortex stretching in overall forward scatter of energy, while allowing local backscatter. The wavelet-based large eddy simulation adapts the grid to capture the creation of small-scale eddies, while adopting subgrid models based on the self-amplification of strain. The advancement of artificial intelligence in turbulence modelling is currently evolving around accelerating the numerical simulations of turbulent flow. However, there is a clear connection between the application of wavelet transfroms and neural networks for directly solving the Navier-Stokes equation, indicating some potential benefits of wavelet methods over the neural networks.

Skin cancer is an exquisite disease globally nowadays. Because of the poor contrast and apparent resemblance between skin and lesions, automatic identification of skin cancer is complicated. The rate of human death can be massively reduced if melanoma skin cancer can be detected quickly using dermoscopy images. In this research, an anisotropic diffusion filtering method is used on dermoscopy images to remove multiplicative speckle noise and the fast-bounding box (FBB) method is applied to segment the skin cancer region. Furthermore, the paper consists of two feature extractor parts. One of the two features extractor parts is the hybrid feature extractor (HFE) part and another is the convolutional neural network VGG19 based CNN feature extractor part. The HFE portion combines three feature extraction approaches into a single fused feature vector: Histogram-Oriented Gradient (HOG), Local Binary Pattern (LBP), and Speed Up Robust Feature (SURF). The CNN method also is used to extract additional features from test and training datasets. This two-feature vector is fused to design the classification model. This classifier performs the classification of dermoscopy images whether it is melanoma or non-melanoma skin cancer. The proposed methodology is performed on two ordinary datasets and achieved the accuracy 99.85%, sensitivity 91.65%, and specificity 95.70%, which makes it more successful than previous machine learning algorithms.

The multidrug resistance transporter NorM is an important drug resistance pump and plays a critical role in multidrug resistance in bacteria and mammals. In this study we carried out molecular dynamics simulation to study the mechanism of Na+ binding and dynamical structures of two long loops in the substrate-releasing process in substrate binding NorM. Our simulation study identified several key residues (D41, E261 D377) along the Na+ binding pathway and a multi-state ion-binding mechanism is proposed based on the simulation study. In this proposed model, the transport of Na+ is a multi-stage process with D41 being the first station for binding to Na+, followed by Na+ binding to the second station E262 and finally to the cation-binding site of E262 and D377. During the transport of Na+, the transmembrane components TM1, TM7 and TM2 are rearranged to facilitate the ion transport as well conformational changes of NorM to a closed state. Further, substrate-bound simulation revealed that Loop3-4 and Loop9-10 control the substrate-releasing process.

Synthesis and antitumour activity of a palladium compound, [Bis (quinoline) palladium (II) chloride] (coded as NH1) alone and in combination along with its proposed mechanism of action has been described in the present study. Antitumour activity has been performed in seven different cancer cell lines using colorimetric 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay. The investigated palladium compound demonstrated superiority over clinical standard cisplatin against drug resistant ovarian cancer cell lines. NH1 also demonstrates 4.4 times greater activity than cisplatin against breast cancer model. Binary sequenced combination study showed that NH1 in combination with curcumin is mostly additive to antagonistic. However, combination of NH1 with 6-shogaol demonstrated synergism depending on dose and sequence. Proteomic study revealed that changes in expression of 14 proteins were significantly associated with anticancer mechanism of NH1. In vivo anticancer activity of NH1 at a dose of 0.75 mg/kg was also evaluated using Erlich Ascites Carcinoma (EAC) cell lines in Swiss-albino mice model. Preliminary toxicity study in Swiss-albino mice proved that NH1 is comparatively less toxic at both of the administered doses, either 2.5 mg/kg or 5 mg/kg. However, cisplatin demonstrated significant toxicity at both of the administered doses. Biochemical investigations also supported that NH1 demonstrated lesser toxicity profile towards liver or kidney compared to clinical standard cisplatin.

Dried blood spot (DBS) testing on confetti is one of the most common methods used to collect and extract DNA from field samples for molecular epidemiology of malaria studies. Here, we investigated whether ethanol or other solutions used to clean scissors are a source of sample contamination. DBS were prepared from 3 drops of blood from two Plasmodium falciparum cultures spotted on confetti, and 3 solutions (water, ethanol and DNase) were used to clean scissors between spots during DNA extraction. For each cleaning solution, two blank confetti were used as negative controls. Samples were analyzed by PCR-based genotyping of merozoite surface proteins 1 & 2 (msp-1 and msp-2), and P. falciparum chloroquine resistance transporter (Pfcrt). A total of 15 samples were analyzed. Based on msp-1 and msp-2 amplification, P. falciparum was detected on blank confetti when scissors were washed with ethanol. Based on Pfcrt amplification, DNA of P. falciparum was detected on blank confetti when scissors were cleaned with ethanol or water. No P. falciparum genes were detected on blank confetti when scissors were cleaned with DNase. Scissors cleaned with DNase prevented cross-contamination between samples during processing of dried blood spots, whereas ethanol (which is commonly used) fails to avert cross-contamination.

We report on the development of several different thin-film functional material systems prepared by RF magnetron sputtering at Edith Cowan University nanofabrication labs. We conduct research on the design, prototyping, and practical fabrication of high-performance magneto-optic (MO) materials, oxide based sensor components, and heat regulation coatings for advanced construction and solar windows.

Metallic thin-film materials and nanoparticles (mainly Silver (Ag)-based) are recently being used in many nano-technological applications including sensors, reflective heat-mirror coatings, and antibacterial coatings as well. The physical vapor deposition technique attracts significant attention for Ag-based nanocomposites with tailoring the structural and optical properties of metallic thin films thus allowing further improvements and application possibilities in various existing fields namely electronics, catalysis, magnetics, optics in alongside the environment and health and new emergent fields in, particularly thin-film coatings. This study highlights the preparation, characterization, properties, and possible future application directions of several types of Silver (Ag)-based nanocomposite thin films prepared by using physical vapor deposition techniques.

With the dramatic increase in world population, continued advances in modern greenhouse agriculture and plant growth practices are expected to help overcome the global problem of future food shortages. Next generation greenhouse design practices will need to address a range of issues, ranging from energy and land use efficiency to providing plant-optimised growth techniques. In this paper, we focus on investigating the optimum irradiation spectra matched to the lettuce species (Lactuca sativa, L.), which is commonly grown in greenhouse environments, in order to develop low-emissivity glass panes that maximize the biomass productivity of glass greenhouses. This low-emissivity glass passes the solar spectral components needed for crop growth, while rejecting other unwanted radiations, leading to significant energy savings and other beneficial effects related to greenhouse climate control, in a range of climates. This is due to reducing both the solar heat gain and photosaturation, which can raise the temperature of the crops to harmful levels. Experimental results show that substantial biomass productivity improvements in lettuce (up to ~14.7%) can be attained using spectrally optimized illumination, compared with white light irradiation. We also report on the development of advanced metal-dielectric thin-film filters that produce the optimum illumination spectrum when exposed to sunlight.

Spinal cord injuries (SCI) can result in sensory and motor dysfunctions, which were long-considered permanent. Recent advancement in electrical neuromodulation has been proven to restore sensorimotor function in people with SCI. These stimulation protocols, however, were mostly invasive, expensive, and difficult to implement. In this study, transcutaneous electrical stimulation (tES) was used to restore over-ground walking of an individual with 21 years of chronic paralysis from a cervical SCI. After a total of 66 weeks of rehabilitation training with tES, which included standing, functional reaching, reclined sit-up, treadmill walking and active biking, significant improvement in lower-limb volitional movements and overall light touch sensation were shown by International Standards for Neurological Classification of Spinal Cord Injury (ISNCSCI) score. By the end of the study, the participant could walk in a 4-meter walking test with the aid of a walking frame and ankle foot orthoses. The success in the sensorimotor recovery of our study participant sheds light on the future of non-invasive neuromodulation treatment for SCI paralysis.

Since 2007, at the Electron Science Research Institute (ESRI) nano-fabrication laboratories, Edith Cowan University, Australia, we have devoted research efforts to the synthesis and characterization of bismuth-containing ferrite-garnet-type thin-film magneto-optic (MO) materials of different compositions. We report on the development and properties of highly bismuth-substituted iron-garnet thin films prepared by using radio frequency (RF) magnetron sputtering. We study the process parameters associated with the RF magnetron sputter deposition technique and investigate the results of optimizing process parameters and implementing several special techniques including the fabrication of co-sputtered nanocomposite films, all-garnet multilayer structures, applying oxygen plasma treatment on amorphous garnet layers just after the deposition process, and designing modifications of the annealing crystallization process and regimes for achieving the best MO properties. We demonstrated significant improvement in MO properties of Bi-containing ferrite-type garnet thin-film materials, including record-high MO figures of merit and improved conventional and un-conventional hysteresis loops of Faraday rotation. The attractive optical, magnetic, and magneto-optic properties obtained in highly bismuth-substituted iron garnet thin-film materials of multiple composition types are relevant in the context of manufacturing next-generation ultra-fast optoelectronic devices, such as light intensity switches and modulators, high-speed flat panel displays, and high-sensitivity sensors.

We report on the field testing datasets and performance evaluation results obtained from a commercial property-based visually-clear solar window installation site in Perth-Australia. This installation was fitted into a refurbished shopping centre entrance porch, and showcases the potential of glass curtain wall-based solar energy harvesting in built environments. In particular, we focus on photovoltaic (PV) performance characteristics such as the electric power output, specific yield, day-to-day consistency of peak output power, and the amounts of energy generated and stored daily. The dependencies of the generated electric power and stored energy on multiple environmental and geometric parameters are also studied. An overview of the current and future application potential of high-transparency, visually-clear solar window-based curtain wall installations suitable for practical building integration is provided.

This research was devoted to study the effect of the tacticity of PMMA on the surface physicochemical properties such as the London dispersive component of the surface energy of the polymer, the polar and dispersive free energies, the Lewis’s acid-base surface parameters, and the Lewis acid and base surface energies of atactic, isotactic and syndiotactic PMMAs as a function of the temperature. Inverse gas chromatography (IGC) at infinite dilution was used to determine the surface thermodynamic properties of PMMA at different tacticities. The experimental values of the net retention time and volume of model organic molecules adsorbed on the atactic, isotactic and syndiotactic PMMAs, were obtained by IGC technique at infinite dilution. The London dispersion interaction energy was used for the separation of the polar and dispersive energy of the different n-alkanes and polar solvents adsorbed on the different PMMA surfaces. The London dispersive surface energy γ_s^d (T) of PMMAs was determined by applying the Hamieh thermal model that took into account the effect of the temperature on the surface area of adsorbed molecules. The obtained results showed non-linear variations of γ_s^d (T) of atactic, isotactic, and syndiotactic PMMAs with three maxima characterizing the three transition temperatures of PMMAs, T_g, T_g and T_(liq-liq) with a shift of these temperatures with the isotactic and syndiotactic PMMAs. It was showed that the polar interaction free energy ∆G_a^p (T) also showed the presence of the three above transition temperatures of the polymers. The study showed an important non-linearity variation of the different acid-base parameters in the various polymer surfaces proving the highest effect of the temperature and the tacticity on these parameters. The determination of the enthalpic and entropic Lewis’s acid-base parameters showed an amphoteric character for the different PMMAs. The basicity of the atactic PMMA was about four times larger than its acidity outside the neighborhood of the transition temperatures of the polymer. Whereas, the isotactic PMMA was about 2 to 2.5 times more basic than acid, while the syndiotactic PMMA exhibited the highest basicity by showing a surface 5 to 8 times more basic than acid. However, the Lewis acid-base parameters strongly depended on the temperature and sudden variations of these surface parameters were observed around the transition temperatures largely depending on the PMMA tacticity. The determination of the polar acid and base surface energies of the three PMMAs led to the same previous transition temperatures with an important effect of the tacticity of PMMA on the values of these acid-base surface energies.

The temperature effect plays an important role for an accurate determination of the polar free energy, polar thermodynamic parameters, and enthalpic and entropic Lewis’s acid base properties of oxides, polymers and composites polymers/oxides. The adsorption of polymers on other solid surfaces is crucial in many industrial applications, coatings, paints, catalysis, colloids and adhesion processes. (1) Background: Inverse gas chromatography at infinite was used for the physico-chemical characterization of solid substrates by determining the thermodynamic parameters of adsorption of model organic solvents on solid surfaces such as polymers, metallic oxides, carbon fibers, pharmaceutical or 3D/4D printing substrates. (2) Methods: A new method based on the London dispersion equation was applied with a new parameter associating the deformation po-larizability and the harmonic mean of the ionization energies of solvent. More accurate values of the dispersive and polar interaction energies of the various organic solvents adsorbed on PMMA in bulk phase and PMMA/silica at different recovery fractions were obtained as well as the Lewis acid-base parameters and the transition temperatures of the different composites. (3) Results: This new methodology gave very interesting results on the behavior of PMMA adsorbed on silica. An important effect of the temperature and the recovery fraction on the various physicochemical and thermodynamic properties was highlighted. The variations of all interaction parameters showed the presence of three transition temperatures for the different PMMA adsorbed on silica with the various coverage rates with a shift of these temperatures for a recovery fraction of 31% (4) Con-clusions: An important variation of the polar enthalpy and entropy of adsorption, the Lewis ac-id-base parameters and the intermolecular separation distance as a function of the temperature and the recovery fraction of PMMA on silica.

The poly lactic acid (PLA) is one of the most used bio-derived thermoplastic polymers in 3D and 4D printing applications. The determination of PLA surface properties is of capital importance in 3D/4D printing technology. (1) Background: The surface thermodynamic properties of PLA polymer were determined by using the inverse gas chromatography (IGC) technique at infinite dilution. The determination of the retention volume of polar and non-polar molecules adsorbed on the PLA particles filling the column allowed us to obtain the dispersive, polar, and Lewis’s acid-base surface properties at different temperatures from 40 °C to 100 °C. (2) Methods: the applied surface method was based on our recent model that used the London dispersion equation and the new chromatographic parameter function of the deformation polarizability and the harmonic mean of the ionization energies of the PLA polymer and organic molecules. (3) Results: The application of this new method led to the determination of the dispersive and polar free surface energy of adsorption of molecules on the polymeric material, as well as the glass transition and the Lewis acid-base constants. (4) Conclusions: four interval temperatures were distinguished showing four zones of the variations of the surface properties of PLA as a function of the temperature before and after the glass transition.

Hypertension is a frequent risk factor for cardiovascular diseases and the prevalence rate is continuously rising. Multiple pathophysiological mechanisms are responsible for hypertension, necessitating a combination of drugs from different classes for best management. Combination therapy is five times more effective in decreasing blood pressure compared to escalating the dose of a single agent. As per the ACCOMPLISH trial analysis, coupling a renin-angiotensin system inhibitor with a calcium channel blocker is more effective than the combination of a renin-angiotensin system inhibitor with diuretics in reducing major cardiovascular events, cardiovascular-related mortality, and the progression of chronic kidney disease. The renin-angiotensin system can be suppressed by inhibiting the angiotensin-converting enzyme or angiotensin type 1 receptor (AT1R), resulting, in decreased vascular smooth muscle contraction, heart performance, and reduced aldosterone synthesis. Calcium channel blockers work by inhibiting L-type calcium channels, reducing heart performance via negative inotropic, chronotropic, and bathmotropic effects, along with reducing vascular smooth muscle contraction. Diuretics exert their antihypertensive impact by changing body fluid volume and electrolytes. Initially, hypertension treatment commences with a single medication but often, different classes of two or more antihypertensive medications are necessary for achieving the target blood pressure goal. Sometimes, for Resistant hypertension four different classes of antihypertensive medications are necessary to reach the target blood pressure goal.

We analyze the thermal convection thresholds and linear characteristics of the primary and secondary instabilities for viscoelastic fluids saturating a porous horizontal layer heated from below by a constant flux. Galerkin method is used to solve the eigenvalue problem by taking into account the elasticity of the fluid, the ratio between the viscosity of the solvent and the total viscosity of the fluid and the lateral confinement of the medium. For the primary instability, we found out that depending on the rheological parameters, two types of convective structures may appear when the basic conductive solution loses its stability: stationary long wavelength instability as for Newtonian fluids and oscillatory convection. The effect of the lateral confinement of the porous medium by adiabatic walls is to stabilize the oblique and longitudinal rolls and therefore selects transverse rolls at the onset of convection. In the range of the rheological parameters where stationary long wave instability develops first, we use a parallel flow approximation to determine analytically the velocity and temperature fields associated to the monocellular convective flow. The linear stability analysis of the monocellular flow is performed, and the critical conditions above which the flow becomes unstable are determined. The combined influence of the viscoelastic parameters and the lateral confinement on the characteristics of the secondary instability is quantified. The major new findings concerning the secondary instabilities may be summarized as follows: (i) For concentrated viscoelastic fluids, computations showed that the most amplified mode of convection corresponds to oscillatory transverse rolls which appears via a Hopf bifurcation. This pattern selection is independent of both the fluid elasticity and the lateral confinement of the porous medium; (ii) For diluted viscoelastic fluids, the preferred mode of convection is found to be oscillatory transverse rolls for a very laterally confined medium. Otherwise stationary or oscillatory longitudinal rolls may develop depending on the fluid elasticity. Results also showed the destabilizing effect of the relaxation fluid elasticity and the stabilizing effect of the viscosity ratio for the onset of both primary and secondary instabilities.

Anemia and thyroid disorders are global health issues that affect all ages but are more apparent in women. In this case, some serological components responsible for IDA and TSH disorders in women have been found actively regulated through a complex steroidal-calcitriol mediated pathway. This research has been investigated the correlation between Calcitriol and the serological components responsible for IDA and TSH disorders in childbearing and non-child-bearing women of different health conditions. Experimental sampling from 452 women suffering from both IDA and TSH disorders were taken, aged between 0 and 70 years. Serological parameters, such as iron, total iron-binding capacity and ferritin, were assessed for IDA profiling, whereas thyroid-stimulating hormone and free thyroxin were for TSH profiling based on the individual’s serum calcitriol status. The resulted serological data were interpreted using sophisticated computer programming language and algorithms for quantitative biochemical analysis. The study resulted in a significant correlation between FT4 and Calcitriol (P<0.0001) for all age groups. TSH also showed strong interactions with the fluctuation of calcitriol level (P<0.0001), except for the children aged below 10 years (P<0.063). The iron, TIBC, TSH, and FT4 showed phenomenal regulation with the steroidal-calcitriol concentration for congenital patients. Unlike the others, ferritin has a substantial connection with Calcitriol (P<0.0064) fluctuation in the serum. To ratify, the concentrations of TSH, FT4, iron, TIBC, and ferritin were found to be significantly interconnected in terms of serum calcitriol level in women suffering from IDA and TSH disorders simultaneously. To understand the accuracy and efficacy of the Calcitriol in IDA and TSH disorders, some other inflammatory markers and parathyroid hormone analysis are need in future studies, besides a large number of samples.

Iron is an essential nutrient and necessary for biological functions from DNA replication and repair to transcriptional regulation, mitochondrial respiration, electron transfer, oxygen transport, photosynthesis, enzymatic catalysis, and nitrogen fixation. However, due to iron’s propensity to generate toxic radicals which can cause damage to DNA, proteins, and lipids, multiple processes regulate uptake and distribution of iron in living systems. Understanding how intracellular iron metabolism is optimized and how iron is utilized to regulate other intracellular processes is important to our overall understanding of a multitude of biological processes. One of the tools that the cell utilizes to regulate a multitude of functions is ligation of the iron-sulfur (Fe-S) cluster cofactor. Fe-S clusters comprised of iron and inorganic sulfur are ancient components of living matter on earth that are integral for physiological function in all domains of life. Here we will explore the ways in which the cell utilizes Fe-S clusters to sense the intracellular environment and respond to maintain equilibrium.

This work proposes a hollow-core photonic crystal fiber-based edible oil sensor in the terahertz (THz) range (e.g., 1.0THz ≤ f ≤ 3.0THz) and different sensing characteristics are numerically analyzed. The suggested sensor’s performance was assessed by means of COMSOL Multiphysics, a commercial program that uses the finite element approach. The computational results indicate that the relative sensitivity is 85.591%, 84.648%, 82.625%, 82.683%, and 79.161%, respectively, at f = 2.2 THz, for several types of sunflower oil, mustard oil, coconut oil, olive oil and palm oil; and the corresponding effective areas are 7.22×10-8 um2, 7.09×10-8 um2, 6.83×10-8 um2,7.09×10-8 um2, 6.5231 ×10-8 um2. In addition, the effective material loss for sunflower oil, muster oil, coconut oil, olive oil, and palm oil has been found to be 0.02561 cm-1, 0.027054 cm-1, 0.030322 cm-1, 0.028854 cm-1 ,0.035427cm-1 respectively. Moreover, the proposed sensor also has low confinement loss are 1.55×10-8 dB/m, 1.63×10-8 dB/m, 1.31×10-8 dB/m, 1.99×10-8 dB/m, 4.0345×10-8 dB/m.This proposed sensor can be fabricated using extrusion and 3D-printing technologies, and due to its augmented detecting capabilities, it can be a vital part of oil sensing devices implemented in real life such as industry fields.

Alzheimer’s disease (AD) is one of the most prevailing neurodegenerative diseases, characterized by memory dysfunction and the presence of hyperphosphorylated tau and amyloid β (Aβ) aggregate in multiple brain regions, including the hippocampus and cortex. The exact etiology of AD has not yet been confirmed. However, epidemiological reports suggest that populations who were exposed to environmental hazards are more likely to develop AD than those who were not. Arsenic (As) is a naturally occurring environmental risk factor abundant in the Earth’s crust and human exposure to As predominantly occurs through drinking water. Convincing evidence suggests that As causes neurotoxicity and impairs memory and cognition although the hypothesis and molecular mechanism of As-associated pathobiology in AD are not clear yet. However, exposure to As and its metabolites leads to various pathogenic events such as oxidative stress, inflammation, mitochondrial dysfunctions, ER stress, apoptosis, impaired protein homeostasis, and abnormal calcium signaling. Evidence has indicated that As exposure induces alterations that coincide with most of the biochemical, pathological, and clinical developments of AD. Here, we overview existing literature to gain insights into the plausible mechanisms that underlie As-induced neurotoxicity and the subsequent neurological deficits in AD. Prospective strategies for the prevention and management of arsenic exposure and neurotoxicity have also been discussed.

Malignant mesothelioma is a rare proliferative cancer that develops in the thin layer of tissues surrounding the lungs. Malignant mesothelioma is associated with an extremely poor prognosis and the majority of patients do not show symptoms. The epidemiology of mesothelioma is important for the identification of disease. The primary aim of this study is to explore the risk factors associated with mesothelioma. The dataset consists of healthy and mesothelioma patients but only mesothelioma patients were selected for the identification of symptoms. The raw data set has been pre-processed and then the Apriori method was utilized for association rules with various configurations. The pre-processing task involved the removal of duplicated and irrelevant attributes, balanced the dataset, numerical to the nominal conversion of attributes in the dataset and creating the association rules in the dataset. Strong associations of disease’s factors; asbestos exposure, duration of asbestos exposure, duration of symptoms, erythrocyte sedimentation rate and Pleural to serum LDH ratio determined via Apriori algorithm. The identification of risk factors associated with mesothelioma may prevent patients from going into the high danger of the disease. This will also help to control the comorbidities associated with mesothelioma which are cardiovascular diseases, cancer-related emotional distress, diabetes, anemia, and hypothyroidism.

We report on the study of energy-harvesting performance in medium-size (400 cm²) glass-based semitransparent solar concentrators employing edge-mounted photovoltaic modules. Systems using several different types of glazing system architecture and containing embedded diffractive structures are prepared and characterized. The technological approaches to the rapid manufacture of large-area diffractive elements suitable for use in solar window-type concentrators are described. These elements enable the internal deflection and partial trapping of light inside glass-based concentrator windows. We focus on uncovering the potential of pattern-transfer polymer-based soft lithography for enabling both the improved photon collection probability at solar cell surfaces, and the up-scaling of semitransparent solar window dimensions. Results of photovoltaic characterization of several solar concentrators employing different internal glazing-system structure and diffractive elements produced using different technologies are reported and discussed.

Zinc oxide (ZnO) as a semiconductor in its crystalline or amorphous form is still a promised material, especially under isobaric and isothermal ensembles. In this work, Parallel and Equilibrium Molecular Dynamics and DL_POLY_4 software are employed to predict the relationship between the behavior of ZnO chemical bonds and the phase transition literatures, using correlation function g(r) of Zn-Zn, Zn-O, and O-O pairs. Our system is composed of 5832 atoms of ZnO rocksalt structure (2916 atoms of Zn2+ and 2916 atoms of O2-), under the temperature of 300 (K) and the range of pressure 0-400 (GPa). The lengths of ZnO bonds, the standard error, standard deviation, the maximum of g(r), and the percentage of the variation of the bonds are analyzed. The interatomic interactions are modeled by the potential of Buckingham for short-range and Coulomb for long-range interactions. The calculations were run on the RAVEN Supercomputer of Cardiff University (UK). Our data are mostly in the vicinity of available information of bonds lengths; the rest can be deduced from the pressure of phase transition to use it as a new approach of phase transition confirmation. However, the rest of our results are still a prediction because of no results under extended pressure used in this work.

The permeation of dioxin-like pollutants, namely, chlorinated dibenzodioxins and dibenzofurans, through lipid membranes has been simulated using classic molecular dynamics (CMD) combined with the umbrella sampling approach. The most toxic forms of chlorinated dibenzodioxin and dibenzofuran, 2,3,7,8-tetrachloro-p-dibenzodioxin (TCDD) and 2,3,7,8-tetrachlorodibenzofuran (TCDF), and a dioleyl-phosphatidylcholine (DOPC) lipid membrane of 50 Å wide have been chosen for our study. The free energy profile shows the penetration process is largely favoured thermodynamically (DG≈-12 kcal/mol), with a progressively decrease of the free energy until reaching the energy minima at distances of 8Å and 9.5Å from the centre of the membrane for, respectively, TCDD and TCDF. At the centre of the membrane, both molecules display subtle local maxima with free energy differences of 0.5 and 1 kcal/mol with respect to the energy minima for TCDD and TCDF, respectively. Furthermore, the intermolecular interactions between the molecules and the lipid membrane have been characterized at the minima and the local maxima using hybrid quantum mechanics/molecular mechanics energy decomposition analysis (QM/MM-EDA). Total interaction energies of -17.5 and -16.5 kcal/mol have been found at the energy minima for TCDD and TCDF, respectively. In both cases, the dispersion forces govern the molecule-membrane interactions, no significant changes have been found at the local maxima, in agreement with the classical free energy profile. The small differences found in the results obtained for TCDD and TCDF point out the adsorption and diffusion processes through the cell membrane are not related to the different toxicity shown by these pollutants.

This research project focuses on the optimization of the hybrid energy system together with the assistance of thin-film coatings aiming to achieve self-sustainable food and crop storage facilities which will run effectively with its own generated energy. An infrastructure will be designed and constructed that will comprise a hybrid power generation system accompanied by thin-film coated semitransparent and non-transparent construction materials for energy saving. Thin-film low emissivity (Low-E) type coatings will assist the transparent or semitransparent construction materials to reflect most of the infrared (IR-mostly heat) and UV spectra of sunlight without interrupting the visible spectrum and will lead to saving energy consumption by reducing the heat and lighting during day time

CO2 geological sequestration in coal seams can achieve the dual objectives of CO2 emission reduction and enhanced coalbed methane production, making it a highly promising carbon capture and storage technology. However, the injection of CO2 into coal reservoirs in the form of supercritical fluid (ScCO2) leads to complex physicochemical reactions with the coal seam, altering the properties of the coal reservoir and impacting the effectiveness of CO2 sequestration and methane production enhancement.In this paper, theoretical calculations based on ReaxFF-MD were conducted to study the interaction mechanism between ScCO2 and the macromolecular structure of both low-rank and high-rank coal, to address the limitations of experimental methods. The reaction of ScCO2 with low-rank coal and high-rank coal exhibits significant differences. At swelling stage, the low-rank coal experiences a decrease in aromatic structure and aliphatic structure, high-rank coal shows an increase in aromatic structure and a decrease in aliphatic structure, while swelling phenomenon is more pronounced in high-rank coal. At dissolution stage, low-rank coal is initially decomposed into two secondary molecular fragments, and then recombine to form new molecular structure, the aromatic structure increased and the aliphatic structure decreased. In contrast, high-rank coal occurs stretches-breakage-movement-reconnection, a reduction in aromatic structure and an increase in aliphatic structure.The primary reasons for these variations lie in distinct molecular structure compositions and the properties of ScCO2, leading to different reaction pathways of functional group and aromatic structure. The reaction pathways of functional groups and aromatic structures in coal can be summarized as follows: the breakage of the O-H bond in hydroxyl groups, the breakage of the C-OH bond in carboxyl groups, transformation of aliphatic structures into smaller hydrocarbon compounds or formation of long-chain alkenes, and various pathways involving broken, rearrangement, recombination of aromatic structures. In low-rank coal, there is a higher abundance of oxygen-containing functional groups and aliphatic structures. The breakage of O-H and C-OH chemical bonds results in the formation of free radical ions, while some aliphatic structures detach to produce hydrocarbons. Additionally, some of these aliphatic structures combine with carbonyl groups and free radical ions to generate new aromatic structures. Conversely, in high-rank coal, the lower content of oxygen-containing functional groups and aliphatic structures, along with stronger intramolecular forces, results in fewer chemical bond breakages and makes it less conducive to the formation of new aromatic structures.These results elucidate the specific deformations of different chemical groups, offering a molecular-level understanding of the interaction between CO2 and coal.

While the majority of previous studies assessing pain-related variables in psychopaths used electric shocks, little is known about the effectiveness of alternative pain-inducing methods to increase emotional responses such as fear and anxiety. A small sample of healthy undergraduate men (N = 15) was recruited to assess the effectiveness of a heat stimulus to induce pain in an immediate versus delayed punishment paradigm. Although pain catastrophizing, anxiety, and threat of pain did not increase throughout the experiment, participants experienced a significant increase of fear of pain and pain intensity, indicating that the heat stimulus was effective in inducing pain. Furthermore, subjects were slower in initiating the pain stimulus during the first five trials, but no time difference was found during the 15 remaining trials. No correlation was found between psychopathic traits and pain-related variables, with the exception of inconsistent results within the Fearless Dominance factor. Findings are discussed in terms of improvement for a larger scale study involving psychopathic individuals.

Multivariate statistical approaches (MSA), such as principal components analysis and multidimensional scaling, seek to uncover meaningful patterns within datasets by considering multiple response variables in a concerted fashion. Although these techniques are readily used by ecologists to visualize and explain differences between study sites, they could theoretically be employed to differentiate organisms within an experimental framework while simultaneously identifying response variables that drive documented experimental differences. Therefore, MSA were used herein to attempt to understand the response of the common, Indo-Pacific reef coral Seriatopora hystrix to temperature changes using data from laboratory-based temperature challenge studies performed in Southern Taiwan. Gene expression and physiological data partitioned experimental specimens by time of sampling, treatment temperature, and site of origin upon employing MSA, signifying that S. hystrix and its dinoflagellate endosymbionts display physiological and molecular signatures that are characteristic of sampling time, site of colony origin, and/or temperature regime. These findings promote the utility of MSA for documenting biologically meaningful shifts in the physiological and/or sub-cellular response of marine invertebrates exposed to environmental change.

The software industry has adopted component-based software development (CBSD) to rapidly build and deploy large and complex software systems with significant savings at minimal engineering effort, cost, and time. However, CBSD encounters issues on security trust, mainly with respect to dependability attributes. A system is considered dependable when it can produce the outputs for which it was designed with no adverse effect on its intended environment. Dependability consists of several attributes that imply availability, confidentiality, integrity, reliability, safety, and maintainability. Dependability attributes must be embedded in a CBSD model to develop dependable component software. Motivated by the importance of these attributes, this paper pursues two objectives: to design a model for developing a dependable system that mitigates the vulnerabilities of software components, and to evaluate the proposed model. The model proposed in this study is labelled as developing dependable component-based software (2DCBS). To develop this model, the CBSD architectural phases and processes must be framed and the six dependability attributes embedded according to the best practice method. The expert opinion approach was applied to evaluate 2DCBS framing. In addition, the 2DCBS model was applied to the development of an information communication technology (ICT) portal through an empirical study method. Vulnerability assessment tools (VATs) were employed to verify the dependability attributes of the developed ICT portal. Results show that the 2DCBS model can be adopted to develop web application systems and to mitigate the vulnerabilities of the developed systems. This study contributes to CBSD and facilitates the specification and evaluation of dependability attributes throughout model development. Furthermore, the reliability of the dependable model can increase confidence in the use of CBSD for industries.

The emergence of unmanned aerial vehicles (UAVs) raised multiple concerns, given their potential for malicious misuse in unlawful acts Vision-based counter-UAV applications offer a reliable solution compared to acoustic and radio frequency-based solutions because of their high detection accuracy in diverse weather conditions. The existing solutions work well on trained datasets, but their accuracy is relatively low for real-time detection. In this paper, we model deep learning-empowered solutions to improve the multi-class UAV's classification performance using single-shot object detection algorithms YOLOv5 and YOLOv7. The transfer learning is employed for performance improvement and rapid training with improved results. We customized a multi-class dataset containing multi-rotor, fixed-wing, and single-rotor UAVs in challenging weather conditions. Experiments show that the integration of transfer learning has achieved good results, with an overall best average-classification precision of 94\%, an average recall of 93.1\%, a mAP$@$0.5 average of 95.3\%, and an average F1 score of 92.33\%. The dataset and code are available as an open source: https://github.com/ZeeshanKaleem/YOLOV5-Large-vs-YOLOV7.git

Background and Research Highlights: Despite all the concerns and initiatives, natural resources like forests, as well as biodiversity are decreasing at an alarming rate worldwide. Conservation is considered as one of the major tools to prevent such loss and rapid degradation. Evidence around the world shows the adverse effects of conservation laws and policies on indigenous peoples and other local communities. Objectives: This study was conducted in one of the forest-dependent communities situated in Sundarban (world’s largest mangrove forest) to understand the impact of conservation laws and policies on their livelihood. Materials and Methods: A qualitative methodology was designed to collect data, using focus group discussions and case study with community people, and individual interviews with the personnel from NGOs and relevant government departments. Findings: Strict conservation policies and restrictions in accessing forest resources made lives and livelihoods of the local community insecure and unstable, thus putting the community in a vulnerable situation. The had to leave their traditional mode of income and look for alternative livelihood options. Almost no evidence was found in relation to upkeeping their rights in conservation activities. Prohibited movement, provision of punishment for entering into the forest without proper permission and struggles in everyday life were some of the highlighted issues. They had no participation in conservation activities, management of alternative livelihood options, and even they were not sensitized before putting restrictions. Although they had a history of emotional and physical attachment with the forest, existing activities did not consider these issues. In addition, corruption and abuse of power by law enforcement agencies towards the local community intensified the sufferings. Conclusion: This study argues that the realization of human rights in conservation activities and the sensitization of the implementing stakeholders are prerequisites for ensuring the sustainability of both biodiversity and the affected people.

This work is devoted to physical vapor deposition synthesis, and characterisation of bismuth and lutetium-substituted ferrite-garnet thin-film materials for magneto-optic (MO) applications. The properties of garnet thin films sputtered using a target of nominal composition type Bi_0.9Lu_1.85Y_0.25Fe_4.0Ga₁O₁₂ are studied. By measuring the optical transmission spectra at room temperature, the optical constants and the accurate film thicknesses can be evaluated using Swanepoel’s envelope method. The refractive index data are found to be matching very closely to these derived from Cauchy’s dispersion formula for the entire spectral range between 300-2500 nm. The optical absorption coefficient and the extinction coefficient data are studied for both the as-deposited and annealed garnet thin-film samples. A new approach is applied for accurately deriving the optical constants data simultaneously with the physical layer thickness, using a combination approach employing custom-built spectrum-fitting software in conjunction with Swanepoel’s envelope method. MO properties, such as specific Faraday rotation, MO figure of merit and MO swing factor are also investigated for several annealed garnet-phase films.

(1) Background: Various cutaneous adverse drug reactions (ADRs) are observed with the development of mRNA COVID-19 vaccines. To gain insight into the clinicopathologic features, we analyzed the correlation of histological and clinical data in 48 patients with these ADRs.; (2) Methods: Single-center retrospective study in patients with ADRs post-mRNA COVID-19 vaccination (mRNA-1273 and BNT162b2 vaccines).; (3) Results: Distant generalized ADRs prevailed (91%), often appearing clinically as spongiotic dermatitis or maculo-papular exanthema. Histopathological analysis revealed spongiotic changes (46%) and dermal superficial perivascular lympho-histiocytic infiltrates (17%). Eosinophils were found in 66% of biopsies, neutrophils in 29%, and plasma cells only in 8% of biopsies. Most ADRs occurred post-second vaccine dose (44%). Histologically spongiotic changes were associated with clinical features of spongiotic dermatitis in only 50% and maculo-papular exanthema in the remaining patients. ADRs represented an aggravation of preexisting skin disease in 23% of patients. ADRs regressed within 28 days or less in 53% of patients and persisted beyond a month in the remaining patients.; (4) Conclusions: Our study demonstrates a diverse spectrum of generalized ADRs, revealing correlations between histology and clinical features but also instances of divergence. The majority of ADRs are self-limited with a few extending beyond a month.

The details of antigen-antibody interactions and the identification of epitopes are critical for the development of monoclonal antibody drugs. Ab42 is a native human-derived anti-CFH monoclonal antibody. In this study, the interaction between antigen pCFH and antibody (Ab42) was theoretically demonstrated by molecular docking and MD simulation, combined with free energy calculation and computational alanine scanning (CAS), and key amino acids and epitopes were identified. Experimental alanine scanning (EAS) was then carried out to verify the results of the calculation, and our results indicated that Ab42 antibody forms hydrogen bonds and interacts hydrophobically with pCFH through the Tyr315, Ser100, Gly33, and Tyr53 residues on its CDR, while the main pCFH epitopes are located at the six sites of Pro441, Ile442, Asp443, Asn444, Ile447, and Thr448. In conclusion, this study has explored the mechanism of antigen-antibody interaction from both theoretical and experimental aspects, and our results have important theoretical significance for the design and development of relevant antibody drugs.

Since the first coronavirus patient was identified in Bangladesh on March 8, the most controversial issue is about the exact level of the infection in Bangladesh. Conformity with the population density the number of COVID-19 tests is inadequate. As the number of tests increases, so does the number of infections, making it difficult to predict the spread of COVID-19 in Bangladesh. In this case, the unplanned initiatives are particularly responsible in other for unplanned measures, lack of public awareness, and lack of proper knowledge. In this case, the Ministry of Health has made three major mistakes, three important features of the medical system in Bangladesh have been mentioned. It is more effective to prevent COVID-19 by isolating the infected person by further testing COVID-19 until effective treatment is available and to provide adequate and effective masks and personal protective equipment (PPE). In this case, the COVID-19 testing kit invention has received a good response in many countries of the world. This study focuses on the comprehensive data verification, selection, and evaluation of COVID-19 in Bangladesh and its implications for the future, what to do to address and prevent the COVID-19 challenge, and effective treatment against the coronavirus (COVID-19). It is hopeful that the discussion of the material mentioned in this research paper will help to strike a balance between the government, citizens, and experts which will be feasible in improving the current situation in COVID-19 Bangladesh and reducing its severity.

A cross-sectional study was carried out to determine the prevalence of subclinical mastitis (SCM) among medium to large scale household dairy farms in southwestern district, Jhenaidah, Bangladesh during July to December 2019. A total of 78 (n=100) lactating cows from household dairy farms (N=32) having three or more dairy cows were selected randomly as sampled populations. Milk samples were screened for SCM by using Surf Field Mastitis Test (SFMT). The prevalence of SCM varied among farm level [71.9% (95% CI: 53.3-86.3)], individual animal level [67.9% (95% CI: 56.4-86.3)] and quarter level [29.5% (95% CI: 24.5-34.9)]. Descriptive statistics represented the farmers and farm demography, characteristics of the sampled population, and overall management feature. Random Effect Logistic Regression identified, Body Condition Score (BCS) [OR=3.8 and 2.9, at cows level and quarter level respectively (BCS-2 vs. BCS-≥3)], and breed [OR=5.1 and 2.9, at cows level and quarter level respectively (HF× Sahiwal vs. HF × Local)] as potential risk factors. This study shows that SCM is highly prevalent in the study area, which is a major threat to the dairy industry's production performance. Regular screening by SFMT, proper hygiene, improve the management system, and farmer’s awareness is required to control the disease.

The present study was carried out at the north-eastern part of Bangladesh to investigate organochlorine pesticide (OCP) residues and microbiological quality of dried barb (Puntius sophore). Samples were collected from both producers and retailers from December 2016 to April 2017. A control sample was also prepared with the same raw fish used by the producers in the laboratory to compare the result. Gas Chromatography with Electron Capture Detector (GC-ECD) was used to detect and quantify OCP residues. Around 22 % (6) samples out of 27 were found contaminated with OCP residues. Among these six adulterated samples, four were from retailers and two from producers. Only Aldrin was detected in four samples and rest two samples were detected with both Aldrin + Dieldrin and Aldrin + Endrin. Aldrin was found between 0.332 to 0.967 ppm, Dieldrin 0.762 ppm, and Endrin 0.828 ppm. All these values were much higher than the Maximum Residual Limit (MRL) 0.1 ppm. Aerobic Plate Count (APC) of producer samples were ranged between log5.3 ± 0.02 to log5.4 ± 0.03, log6.2 ± 0.02 to log6.4 ± 0.02 for retailer samples and log5.0 ± 0.03 to log5.2 ± 0.04 for control samples. While fungal count was ranged between log3.2 ± 0.04 to log3.5 ± 0.04, log3.4 ± 0.04 to log3.6 ± 0.03 and log2.2 ± 0.05 to log2.5 ± 0.03 for producer, retailer and control samples respectively. All the producer and retailer samples and one-third of the control samples were found contaminated with Escherichia coli. Whereas, Salmonella sp. was detected as 13.3% in producer samples, 20% in retailer samples except for the control. In case of Vibrio sp., maximum count was found for retailer samples (13.3%), whereas, producer and control samples showed no detection. The finding of the present study revealed the presence of pesticides and poor microbiological quality of dried barb are alarming for the consumers of Bangladesh and which may cause chronic disease and potential long-term risk for human health.

The concept of Green Human Resource Management (GHRM) is regarded as a major turning point in managing human capital among firms. Sustainable practices, ecofriendly initiatives, and adequate management of employees (i.e. recruitment, training, performance, rewards, and involvement) are fundamental aspects of GHRM, which enable improvements in the performance of firms and enhanced competitiveness among their rivals. In this regard, the current study takes a quantitative approach towards analyzing GHRM practices and their effects on employee retention among hotels of UAE. Furthermore, the indirect effect of green innovation is analyzed as a potential mediating variable that can better explain the GHRM-employee retention relationship. A total of 207 employees from five 5*-hotels were selected as participants to provide information regarding the factors under examination in this research. The collected data is analyzed using Smart-PLS v.3 and via PLS-SEM technique. The perspective of employees on the outcome of GHRM initiatives and their willingness to remain in their firms can greatly contribute to the current understanding of GHRM and its effectiveness on employee retention in the context of hotel industry of UAE, and thus, aid the practitioners and scholars alike.

The detection of Fasciola eggs in ruminant fecal samples typically occurs around 15 weeks post-infection during patent infections. The recent introduction of coproantigen ELISA (cELISA) diagnostics, which capture antigenic enzymes in fecal material, holds promise for monitoring Fasciola fecal egg count (FFEC) to implement control programs, particularly targeted treatments. This study compared two study groups, those with positive FFEC (FFEC+ve) and negative FFEC (FFEC-ve), to assess the sensitivity of Flukefinder sedimentation and a cELISA kit. This study reports that the coproantigen ELISA detection limit was 4.5 eggs per gram (epg) for a 100% positivity rate. Additionally, a moderate, statistically significant positive correlation (r²=0.716, p-value < 0.01) and an odds ratio of 1.96 (p-value < 0.01) were observed between FFEC and Fasciola coproantigen from cELISA. This implies that for every single unit increase in FFEC, there is a 96% likelihood of obtaining a higher optical density (OD) reading from the cELISA test. The results suggest that cELISA can complement fecal sedimentation tests, serving as a valuable tool for detecting cattle with high FFEC. This capability facilitates targeted treatment strategies, thereby aiding in the control and prevention of the spread of fasciolosis within the studied area.

Alkaloids are the most diversified nitrogen-containing secondary metabolites having antioxi-dant, and antimicrobial properties and are extensively used in pharmaceuticals to treat different types of cancer. Nicotiana serves as a reservoir of anticancer alkaloids and is also used as a model plant for the de novo synthesis of various anti-cancer molecules through genetic engineering. Up to 4% of the total dry weight of Nicotiana was found to be composed of alkaloids where nicotine, nornicotine, anatabine, and anabasine are reported as the dominant alkaloids. And, among the alkaloids present in Nicotiana, β-carboline (Harmane and Norharmane), Kynurenines are found to show anti-tumor effects, especially in the case of colon and breast cancer. Creating new or shunting of existing biosynthesis pathways in different species of Nicotiana resulted in de novo or increased synthesis of different anti-tumor molecules or their derivatives or precursors includ-ing Taxadiane (~22.5 µg/g), Artemisinin (~120 μg/g), Parthenolide (~2.05 ng/g), Costunolide (~60 ng/g), Etoposide (~1 mg/g), Crocin (~400 µg/g), Catharanthine (~60 ng/g), Tabersonine (~10 ng/g), Strictosidine (~0.23 mg/g), etc. Enrich precursor pool especially Dimethylallyl Diphos-phate (DMAPP) and down-regulating of other bi-product pathways, compartmentalization or metabolic shunting, or organelle-specific reconstitution of the precursor pool might trigger the enhanced accumulation of the targeted anticancer alkaloid in Nicotiana.