Globally, football as a sport has recorded the highest rate of injury morbidity compared with other sports due to the high degree of contact between the players. Coaches play an important role in reducing injuries among the players. The objective of this study was to explore the pattern of football-related sports injuries among junior high school footballers in Dhaka, Bangladesh. A descriptive cross-sectional study was conducted between January 2019 to March 2019 in 20 junior high schools in Dhaka Metropolitan city. We observed 368 boys in the age range of 10 to 18 years old. A pre-structured questionnaire was provided to six trained junior physiotherapists to conduct the face-to-face interview with the boys in the school setting. Most students were from middle-income families. The injury prevalence of defenders was the most (157, 42.7%) followed by mid-fielders (132, 35.94%), forwards (63, 17.1%), and goalkeepers (16, 4.3%). Tackling was the main cause of injury in 21.1% of cases followed by foul play in 19.1% of the cases. In July, there were more injuries (69.0%) and associated muscle strain. Injured footballers did not visit sports physiotherapists as much as they did other health profession and the association was significant. When considering scientific knowledge, students were aware of fitness, flexibility & endurance (25.5%), sports massage (24.5%), the relation of body structure with sports Injury (21.2%), warm-up and/or cool down (19.6%). Based on the study, it was seen that students had no scientific knowledge of sports. As sports is a key activity for school-going children, comprehensive sports injury preventive knowledge is needed for students and sports teachers and coaches. Access to sports physiotherapists is also needed to prevent and manage sports injury at the field level and for rehabilitation.

The biotic and abiotic stresses are the main causes of the loss of agricultural crops productivity, their normal growth and development in the environment. It has been calculated that two-thirds of the major crops are frequently lost due to adverse environmental conditions. The productivity of crops under unfavorable environmental stresses is apparently the main challenge to the breeders and farmers where polyamines (PAs) play diverse roles in environmental stimuli. PAs (putrescine, spermidine, and spermine) are low molecular weight positively charge compounds have the active potential power to negative charge molecules (DNA, RNA, and proteins) is widely distributed in all living organisms. Evidence showed that PAs contribute a lot of different physiological and biological functions, such as cell growth and development, controlling the cell cycle, involve in gene expression, cell signaling, replication, transcription, translation, and membrane stabilization. Naturally occurring polyamines activity acuminated to their involvement with different biotic and abiotic stresses and contribute to the survival of the plant in the environment. Here, we have described the potential mechanisms, synthesis, and various roles of PAs during stresses tolerant and disease resistance.

Soil pH, either low (acidity) or high (alkalinity) is one of the major constraints that affect many biochemical and biological processes within the cell. The present study was carried out to understand the oxidative damage and antioxidant defense in wheat (Triticum aestivum L. cv. BARI Gom-25) grown under different pH regimes. Eight-day-old seedlings were exposed to growing media with different pH levels (4.0, 5.5, 7.0 and 8.5). Seedlings grown in pH 4.0 and in pH 8.5 showed reductions in biomass, water, and chlorophyll contents; whereas plants grown at pH 7.0 (neutral) exhibited better performance. Extremely acidic (pH 4.0) and/or strongly alkaline (pH 8.5)-stress also increased oxidative damages in wheat by excess reactive oxygen species (ROS) generation and methylglyoxal (MG) production, which increased lipid peroxidation and disrupted the redox state. In contrary, the lowest oxidative damage was observed at neutral condition followed by strong acidic condition (pH 5.5), which was attributed mainly due to better performance of the antioxidant defense and glyoxalase systems. Interestingly, seedlings grown at pH 5.5 showed a significant increase in morphophysiological attributes compared with extreme acidic (pH 4.0)- and strong alkaline (pH 8.5)-stress treatments, which indicates the tolerance of wheat to the acidic condition.

The Corona Virus (COVID-19) pandemic situation has posed significant effect on tourism industry. Tourism destinations have embraced emergency health care measures and restrictions imposed on human movement around the world. Beaches and resorts are empty, peoples’ movements are stopped and travelling between territories is strictly controlled. The COVID-19 lockdown around the world has imposed negative impact on the livelihood of people and world economy as well. The present study attempts to find out the scopes for sustainable tourism development in near future from the consequences of social, economic, and environment in COVID-19 pandemic situation.

Breast cancer (BC) is the most common type of cancer in both men and women alike, but it is more prevalent in women. Natural compounds that can modulate the oncogenic process can be considered a significant anti-cancer agent for treating BC. These natural compounds are more effective than synthetic drugs, which have profound side effects on the normal cell and resistance to cancer cells. Genistein is a type of dietary phytoestrogen included in the flavonoid group with a similar structure of estrogen that might provide a strong alternative and complementary medicine to existing chemotherapeutics drugs. Several research studies demonstrated that it can target the estrogen receptor (ER), Human epidermal growth factor receptor-2 (HER2), and Breast cancer gene-1 (BRCA-1) in multiple BC cell lines, as well as sensitize cancer cell lines to this compound when used at an optimal inhibitory concentration. Genistein effectively showed anti-cancer activities through apoptosis induction, arresting cell cycle, inhibiting angiogenesis with metastasis, reducing inflammation, mammosphere formation, tumor growth, up-regulating tumor suppressor gene, and downregulating oncogene in suppressing cancer progression in vitro and animal model study. In addition, research studies have also suggested that these phytochemicals synergistically reverse the resistance mechanism of chemotherapeutic drugs, increasing the efficacy of some chemoinformatics drugs. Our review article aims to unbox and validate the molecular pharmacology in breast tissue, cell-specific anti-cancer mechanism with synergistic activity, and possible pharmacokinetic parameters of Genistein as a potential alternative therapeutic option for the treatment of BC.

In terms of sustainability, there is a pressing need to evaluate agricultural and forestry leafy biomass that has no current economic value or may pose a threat to the environment. In this aspect, leafy biomass, which represents around 5% of the total tree, can be used for purposes that would be more profitable and ecofriendly. To this end, biorefinery of leafy biomass in the way of extracting valuable health compounds such as phenolics would ensure a valuable societal health ingredient besides alleviating waste disposal problem. However, during the biorefinery process, the primary challenges start with ensuring the feedstock to produce phenol rich leaves extract followed by their isolation and commercialization of this leaves extract. This current review aims to detail the types of biomasses, biorefinery approach of leafy biomass towards the phenolic extraction, leaves commercialization followed by the marketing strategy of the application of phenol rich leaves extract. The outcome of this overview will serve researchers and relevant industries in understanding the process for feedstock collection and the suitable sectors to apply leafy biomass derived healthy compounds.

Green development ensures the socioeconomic development that incorporates environmental issues while remaining economically viable for owners and tenants. Government as the authority of the state should provide favorable incentives, policy and regulatory pressure for green development. The present study aims to investigate the government policies and regulations for green development in Bangladesh and make a critical discussion of the initiatives. The study is descriptive in nature and collects secondary information. Evidence suggests that environmental degradation and climate change related risks and vulnerabilities have intensified in Bangladesh. The government of Bangladesh (GOB) is concerned about green development and formulates various Acts, regulations and policy initiatives since 2010. Major green development initiatives observed in the financial institutions due to the mandatory requirements by Bangladesh Bank but green bond and green insurance in capital market are yet to be developed. The GOB required taking proper policy initiatives for the garments and leather industries to ensure pollution free production system which ensures green trade initiatives. The environmental taxes and ecological compensation mechanisms should be revised. Urban green space and Government green procurement are still less concerning matter. The GOB should make effective collaboration with all related stakeholders to ensure the green development.

The COVID-19 epidemic and the measures adopted to contain it have had a significant impact on energy patterns throughout the world. The pandemic and movement restrictions led to unpredictable fluctuations in power systems demand and the fuel price for a delayed period. Monkeypox, another viral disease, appeared during the post-COVID period. It is assumed that the outbreak of monkeypox is unlikely due to the implication of preventive measures experienced by COVID-19. At the same time, the probability of an epidemic cannot be blindly overlooked. This paper aims to examine and analyze historical data to look at how much petroleum fuel was used for generating power and how the price of petroleum fuel changed over seven years, from January 2016 to August 2022. This period covers the time before the COVID-19 pandemic, during the pandemic, and after the pandemic. Several time-series forecasting models, including all four benchmark methods (Mean, Naïve, Drift, and Snaïve), Seasonal and Trend decomposition using Loess (STL), Exponential Smoothing (ETS), and Autoregressive Integrated Moving Average (ARIMA) methods have been applied for both fuel consumption and price prediction. The best forecasting method for fuel price and consumption has been identified among these methods. The paper also utilizes the ARIMAX model by incorporating multiple exogenous variables, such as monthly mean temperature, mean fuel price, and mileage of vehicles traveling during a certain period of pandemic lock-down. It will assist in capturing the non-smooth and stochastic pattern of fuel consumption and price due to the pandemic by separating the seasonal influence and thus provide a prediction of the consumption pattern in the event of any future pandemic.

Ocean wave energy is a significantly well-liked renewable energy source. The Internet of Things (IoT) offers a great opportunity for development of the ocean wave energy research. The IoT technology significantly enhanced the performance of the ocean wave energy converter (WEC). The data obtained from IoT devices reduce the risk of using WEC. However, Integrating IoT devices with the WEC is a daunting task because controlling the WEC needs real-time data. This paper investigated the performance of WEC and estimate the lifetime of the modules. IoT devices integrated with various sensors determine different parameters and conditions of the ocean. The IoT platform is used for wireless voltmeters, wireless AC current meters, wireless voltage detection, wireless resistance sensors, wireless temperature sensor, wireless accelerometer, wireless pressure meters, and wireless water level sensors to determine the real-time condition of the ocean wave. These devices are also proven to be reliable and accurate.

Global crop yield and food security are being threatened by phytophagous insects. Innovative methods are required to increase agricultural output while reducing reliance on hazardous synthetic insecticides. It appears to be quite effective at reducing production costs and boosting farm profitability to use the ground-breaking CRISPR-Cas technology to create plants that are insect resistant. In contrast, this new technique can modify an insect's genome to either produce gene drive or get beyond an insect's tolerance to various insecticides. This paper reviews and critically discusses the use of CRISPR-Cas genome editing technology in long-term insect pest management. The emphasis of this review is on the prospective uses of the CRISPR-Cas system for insect stress management in crop production by creating genome-edited crops and insects. The potential and difficulties of using CRISPR-Cas technology to reduce pest stress in crop plants are critically examined and discussed.

The need for integrated high-frequency systems has increased significantly, leading to the development of efficient antennas operating in the 0.1-10 terahertz (THz) range. Using graphene as the conducting 2D material and hexagonal boron nitride (hBN) as the dielectric substrate, this research effort examines the design and performance evaluation of a THz band antenna functioning on supporting nanotechnology. The researchers contrasted the system’s performance with the 6G wireless network requirements after analyzing the antenna performance, radiation patterns, and impedance matching. According to this research, graphene, along with hBN can enhance antenna performance overall in the THz band and open pathways for advanced communication. The application of the designed antenna in a 6G wireless network will be tested through um MIMO configuration to achieve a higher data rate.

Open System Interconnection (OSI) model is the best means to understand the way the internet works and the communication of computers over a network system. It is considered as the standard model for network communication. This article describes the OSI model with an example and provides a brief description of the seven layers of the OSI model.

This paper focused on impact localization of composite structures, which possess more complexity in the guided wave propagation because of the anisotropic behavior of composite materials. In this work, a composite plate was manufactured by using a compression molding process with proper pressure and temperature cycle. Eight layers of woven composite prepreg were used to manufacture the composite plate. A structural health monitoring (SHM) technique is implemented with piezoelectric wafer active sensors (PWAS) to detect and localize the impact on the plate. There are two types of impact event are considered in this paper (a) low energy impact event (b) high energy impact event. Two clusters of sensors recorded the guided acoustic waves generated from the impact. The acoustic signals are then analyzed using a wavelet transform based time-frequency analysis. The proposed SHM technique successfully detect and localize the impact event on the plate. The experimentally measured impact locations are compared with the actual impact locations. An immersion ultrasonic scanning method was used to visualize the composite plate before and after the impact event. A high frequency 10 MHz 1-inch focused transducer was used to scan the plate in the immersion tank. Scanning results show that there is no visible manufacturing damage in the composite plate. However, clear impact damage was observed after the high-energy impact event.

Antibiotics are the most magnificent discovery of 20th century that have saved millions of lives from infectious diseases. Microbes have developed acquired antimicrobial resistance (AMR) to many drugs due to high selection pressure from increasing use and misuse of antibiotics over the years. The transmission and acquisition of AMR occur primarily via human–human interface both within and outside of the healthcare facilities. A huge number of interdependent factors related to healthcare and agriculture govern the development of AMR through various drug resistance mechanisms. The emergence and spread of AMR from the unrestricted use of antimicrobials in livestock feed has been a major contributing factor. The prevalence of AMR bacteria has attained its incongruous level worldwide and threatening global public health as silent pandemic, necessitating urgent intervention. Therapeutic options of AMR bacterial infections are limited resulting in significant morbidity and mortality with high financial impact. The paucity in discovery and supply of new novel antimicrobials to treat life-threatening AMR infections stands in sharp contrast to demand. Immediate interventions to contain AMR include surveillance and monitoring, minimizing over the counter antibiotics and antibiotics in food animals, access to quality and affordable medicines, vaccines and diagnostics, and enforcement of legislation. An orchestral collaborative action within and between multiple national and international organizations are required urgently, otherwise, a post-antibiotic era can be a real possibility than an apocalyptic fantasy for the 21st century. This narrative review highlights on the basis, mechanisms and factors in microbial resistance and key strategies to combat antimicrobial resistance.

The U.S. Energy Information Administration (EIA) provides crucial data on monthly and annual fuel consumption for electricity generation. This data covers significant fuels such as coal, petroleum liquids, petroleum coke, and natural gas. Fuel consumption patterns are highly dynamic, influenced by diverse factors. Understanding these fluctuations is essential for effective energy planning and decision-making. This study outlines a comprehensive analysis of fuel consumption trends in electricity generation. Utilizing advanced statistical methods, including time series analysis and autocorrelation, our objective is to uncover intricate patterns and dependencies within the data. This paper aims to forecast fuel consumption trend for electricity generation using data from 2015 to 2022. Several time-series forecasting models, including all four benchmark methods (Mean, Naïve, Drift, and seasonal Naïve), Seasonal and Trend Decomposition using Loess (STL), Exponential Smoothing (ETS), and Autoregressive Integrated Moving Average (ARIMA) methods, have been applied. The best-performing models are determined based on Root Mean Squared Error (RMSE) values. For Natural Gas (NG) consumption, the ETS model achieves the lowest RMSE of 20,687.46. STL demonstrates the best performance for coal consumption with an RMSE of 5,936.203. The seasonal Naïve (SNaïve) model outperforms others for petroleum coke forecasting, yielding an RMSE of 99.49. Surprisingly, the Mean method has the lowest RMSE of 287.34 for petroleum liquids, but the ARIMA model is reliable for its ability to capture complex patterns. Residual plots are analyzed to assess the models' performance against statistical parameters. Accurate fuel consumption forecasting is very important for effective energy planning and policymaking. The findings from the study help policymakers strategically allocate resources, plan infrastructure development and support economic growth.

Aerosol Optical Thickness (AOT) is one of the critical factors for global atmospheric conditions, climate change, and air pollution. AOT has been exposed as a major component of air pollution in Bangladesh. This paper aims to map the seasonal distribution of AOT from 2002-2022 and to explore the internal relationship between AOT and ten air pollutants using remote sensing and machine learning tools. These ten air pollutants are Particulate matter (PM2.5), Methane (CH4), Carbon monoxide (CO), Nitrogen dioxide (NO2), Formaldehyde (HCHO), Ozone (O3), Sulfur dioxide (SO2), Aerosol Particulate Radius (APR), Nitrogen oxide (NOx) and Black carbon (BC). The results show that the concentrations of AOT were higher in December-January-February (mean value 0.50) and March-April-May (mean value 0.50) seasons, mostly in the central, western, and southern parts of Dhaka, Narayanganj, and Munshiganj districts. AOT was a bit less in June-July-August (mean value 0.33) and September-October-November (mean value 0.37). This paper also revealed that the AOT was correlated positively with PM2.5 (0.60), CH4 (0.80), NO (0.76), and BC (0.83) while correlated negatively with CO (-0.66), HCHO (-0.16), SO2 (-0.41), APR (-0.48), and NOx (-0.20). From the machine learning, the Rational quadratic GPR (RME-0.0024, MAE-0.0015, R2-0.96), Matern 5/2 GPR (RMSE-0.0023, MAE-0.0015, R2-0.96), and Squared Exponential GPR (RMSE-0.0015, MAE-0.0015, R2-0.96) were found good classifiers to predict AOT. UN agencies, government line departments, and local and regional development councils for air pollution mitigation and long-term protective measures may use the paper's key results.

This study aims to determine the present and future scopes of the digital economy in Bangladesh to build a developed and prosperous country by 2041. Simultaneously, it analyses the components of the Digital Economy from numerous perspectives from contributing to Bangladeshi economy with an adaptation of the 4th Industrial Revolution and emerging technologies. In the methodology section, qualitative approach is conducted to determine the research objectives where secondary data is used. Around 100 papers are collected and 51 articles are used for conducting this study. The findings of the study are to present the current state of the digital economy which is developing trends that contribute to national GDP for the adaptation of the 4IR for the transformation of smart Bangladesh. From the conceptual implication, companies and individuals are aware of the digital economy, which would lessen digital divide and create a strong link between technology and the economy. Furthermore, establishing customer confidence and trust would be a big issue for Bangladesh's digital platform economy in the future days. From a practical standpoint, IT industries and commercial organizations would have to deal with emerging 4IR and its technologies. The job market would also be expanded in a variety of areas, which would ultimately benefit the national economy. According to the study's conclusions, the digital economy is predicted to expand its commercial and corporate opportunities. Future research might be extended based on qualitative approach towards a digital Bangladesh and create a better developing economy.

The major industrial cities of Bangladesh are heavily experiencing air pollution-related problems due to the increased trend of Particulate Matter (PM2.5) and other pollutants. This paper aimed to investigate and understand the relationship between PM2.5 and land use and climatic variables and to identify the riskiest area and population groups using a Geographic information system and regression analysis. The results show that about 41% of PM2.5 concentration increased within 19 years (2002-2021) in the study area, while the highest concentration of PM2.5 was found from 2012 to 2021. The concentrations of PM2.5 were higher over barren lands, forests, croplands, and urban areas. About 64%, 62.7%, 57%, and 55% concentrations were increased annually over barren lands, forests, cropland, and urban regions, respectively, from 2002-2021. The highest concentration level of PM2.5 (84 mg m-3) among other land use classes was found in urban areas in 2021. The regression analysis shows that air pressure (r2= - 0.26), evaporation (r2= - 0.01), humidity (r2= - 0.22), rainfall (r2= - 0.20), and water vapor (r2= - 0.03) were negatively correlated with PM2.5. On the other hand, air temperature (r2= 0.24), ground heat (r2= 0.60), and wind speed (r2= 0.34) were positively correlated with PM2.5. More than 60 Upazilas were the most polluted areas, with 1,948,029 populations (ages 0-5), 485,407 (ages 50-69), and a total population of 11,260,162 were in the high-risk/hotspot zone. The government line department may use the main results paper's key results, policymakers, stainable development practitioners, academicians, and others for integrated air pollution mitigation and management in Bangladesh and other geographical settings worldwide.

This study investigates the impact of Government Consumption (GC) on Saudi Arabia’s GDP during major economic crises from 1969 to 2022, with a focus on periods marked by fluctuations in oil and non-oil revenues. By integrating these revenue streams, the research provides a more comprehensive analysis of fiscal policy effectiveness during economic downturns. Using an Autoregressive Distributed Lag (ARDL) model, the study reveals the complex role of Government Consumption (GC) in stabilizing and stimulating the Saudi economy amidst revenue volatility.Key findings indicate that while GC does not significantly influence GDP in the short term, its long-term effectiveness varies across different crises. Specifically, GC has acted as a buffer against immediate economic shocks during certain crises while providing a stimulus for economic recovery in others. For instance, during the 2020 COVID-19 pandemic, timely fiscal measures significantly boosted GDP, underscoring the importance of adaptive and proactive fiscal policies. Conversely, the 2014-2016 oil price collapse demonstrated that GC alone was insufficient to counteract economic downturns, emphasizing the need for diversified revenue strategies.These findings underscore the dual role of GC in economic stabilization and recovery. During the COVID-19 pandemic, GC played a crucial role in both mitigating negative economic impacts and supporting recovery efforts, showcasing its effectiveness in times of global disruptions. This demonstrates GC's capability as an immediate buffer against economic shocks and a stimulus for economic recovery. In contrast, during the 2014-2016 oil price collapse, GC was less effective, indicating the limitations of relying solely on government spending without broader economic diversification. This highlights the necessity of diversified revenue strategies to complement fiscal measures for long-term economic resilience.The robustness of the findings was ensured through various diagnostic tests, including checks for autocorrelation, heteroskedasticity, and stationarity of residuals. The absence of significant autocorrelation and heteroskedasticity, along with the stationarity of differenced variables, confirms the validity of the econometric models used.The study contributes to the discourse on fiscal policy in oil-dependent economies by illustrating the critical role of diversified revenue strategies and adaptive fiscal measures in enhancing economic resilience. Recommendations are offered for policymakers to optimize fiscal strategies, ensuring robust economic recovery and long-term stability in volatile markets. This research highlights the necessity for Saudi Arabia to refine its fiscal policies towards greater economic diversification and stability.

The propeller jet from a ship has a significant component directed upwards towards the free surface of the water, which can be used for ice management. This paper describes a comprehensive laboratory experiment where the influences of operational factors affecting a propeller wake velocity field were investigated. The experiment was done on a steady wake field to investigate the characteristics of the axial velocity of the fluid in the wake and the corresponding variability downstream of the propeller. The axial velocities and the variability recorded were time-averaged. Propeller rotational speed was found to be the most significant factor, followed by propeller inclination. The experimental results also provide some idea about the change of the patterns of the mean axial velocity distribution against the factors considered for the test throughout the effective wake field, as well as the relationships to predict the axial velocity for known factors.

A number of experimental and numerical studies point out that incorporating a rotating cylinder can superiorly enhance the aerofoil performance, especially for higher velocity ratios. Yet, there have been less or no studies exploring the effects of lower velocity ratio at a higher Reynolds number. In the present study, we investigated the effects of Moving Surface Boundary-layer Control (MSBC) at lower velocity ratios (i.e. cylinder tangential velocity to free stream velocity) and higher Reynolds number on a symmetric aerofoil (e.g. NACA 0021) and an asymmetric aerofoil (e.g. NACA 23018). In particular, the aerodynamic performance with and without rotating cylinder at the leading edge of the NACA 0021 and NACA 23018 aerofoil was studied on the wind tunnel installed at Aerodynamics Laboratory. The aerofoil section was tested in the low subsonic wind tunnel, and the lift coefficient and the drag coefficient were studied for different angles of attack. The experiments were conducted for two Reynolds numbers: 200000 and 250000 corresponding to two free stream velocities: 20 m/s and 25 m/s, respectively, for six different angle of attacks (-5°, 0°, 5°, 10°, 15° and 20°). This study demonstrates that the incorporation of a leading edge rotating cylinder results in an increase of lift coefficient at lower angle of attacks (maximum around 33%) and delay in stall angle (from 10° to 15°) relative to the aerofoil without rotating cylinder.

Plants have a natural protective process of altering their genetic molecules in response to changing environments. To uncover the genetic potential of plants, it is crucial to understand how they adapt to adverse conditions by analyzing their genetic molecules. In the study, we focused on understanding the responsive genes of tomatoes under drought conditions. We analyzed RNASeq data from different Tomato genotypes, tissue types, and different drought durations. We used a time series scale to identify early and late drought-responsive gene modules and applied a machine learning method to identify the best responsive genes. We found six candidate genes of Tomato (ASCT, FLA2, BAG5, DCL2b, NFP7.3, and ADC1) that were responsive to drought. We further constructed their protein-protein interaction network to identify their potential interactors and found them drought responsive proteins. The candidate genes can help to explore the adaptation of tomato plants under drought conditions. The identification of these candidate genes and modules can have far-reaching implications for molecular breeding and genome editing in Tomato, providing insights into the molecular mechanisms that underlie drought adaptation. This research underscores the importance of the genetic basis of plant adaptation, particularly in changing climates and growing populations.

Agriculture is one of the indispensable fields for the survival of mankind. Potatoes also have a significant role in the field of agriculture. The quality and quantity of potatoes are significantly impacted by several diseases, such as early blight and late blight, and manual interpretation of these leaf diseases is time-consuming and inconvenient. Fortunately, leaf appearance is used to detect diseases in potato plants. Productivity will considerably rise if the infections are detected early. Different types of image processing methods and machine learning methods are used for early recognition of those diseases from leaf images so that the product losses are decreased significantly. For the incredible and marvelous performance of CNN, it is the most popular deep learning method that is used immensely for the recognition of leaf diseases from images. Several pretrained deep learning models, such as VGG16, ResNet50, InceptionV3, MobileNetV2, Xception, and a deep learning model developed using CNN, are employed for potato leaf disease classification and recognition on the same dataset. The transfer learning technique is applied to the pretrained model and the data augmentation technique is applied to the Proposed CNN model for potato disease classification from leaf samples. Compared to pretrained models, the proposed CNN model offers the lowest loss and highest accuracy for potato leaf disease detection while using fewer parameters and layers. It achieves the best performance with a test accuracy of 99.33% compared to other Pretrained models used in the diagnosis of potato leaf disease.

The study aims to provide technical information on the development and application of hazard analysis and critical control points (HACCP) in one of Dhaka's popular baking (cake) industries. A generic HACCP plan in accordance with legal requirements was created after a detailed analysis of data collected from the company. Every step of the production was examined for biological, chemical, and physical hazards. The prerequisite program was designed to address some hazards prior to production, thereby simplifying the HACCP plan. The critical control points were determined by answering the questions in the decision trees. Finally, the HACCP control chart was created to include critical limits, monitoring, and corrective action as components of several HACCP principles. One critical control point (CCP) and two operational pre-requisite programs (oPRPs) were identified throughout the manufacturing process.

Background: COVID-19, caused by SARS-CoV-2, is still a global public health concern due to the absence of effective antiviral treatment against different strains. Studies have shown that pregnant women are more susceptible to COVID-19 due to altered physiology and immunological features. Therefore, this study was designed to investigate pregnant women's knowledge, attitudes, and practice (KAP) to prevent COVID-19 and determine the factors associated with KAP. Methods: A community-based cross-sectional study was conducted among 425 pregnant women in Northern Bangladesh. The samples were obtained using a simple random sampling technique from April 5 to June 15, 2020. The data were collected by face-to-face survey with a structured and pre-tested questionnaire and analyzed using SPSS version 25. Bivariable and multivariable logistic regression analyses were performed, and p-values < 0.05 at 95% CI were considered statistically significant. Results: Overall, the score of KAP among the respondents was 47.76%, 49.41%, and 56.24%, respectively. Participants' area of residence, educational status of the husband, and antenatal care (ANC) visit were significantly associated with the level of knowledge, whereas age, educational status of the husband, number of living children, and knowledge were significant predictors of attitude. The knowledge of COVID-19 was the only predictor associated with the practice. Conclusion: Our study shows that almost half of the participants had poor knowledge, a negative attitude, and poor practices toward COVID-19. Additional health education programs by healthcare professionals and different media, coordinated and combined efforts of government and individuals' participation will be required to fight the spread of the infection.

Hydrogen is believed to be the principal domain of sustainable energy drive as an alternative to fossil fuels. Unlike the existing standards and knowledge for other fuels, the integrity of sealing and storage materials under the hydrogen environment is not comprehensively studied due to the comparatively new technology and lack of standard laboratory protocols. Typically, storage and polymer materials used as sealing experience degradation and damage in different ways over time in the exposure of hydrogen at different operating conditions, called aging. Improved understanding of the physical and chemical mechanism of degradation due to gaseous hydrogen atmosphere; helps to select and develop the materials best suited to carrier and sealing for respective applications. Damage to materials from aging is inevitable in high-pressure hydrogen gas exposure. This review discusses the mechanism of different categories of aging of storage and sealing materials under the hydrogen environment. Also, the article approaches discussing different laboratory test methods for each type of aging simulation. It covers the limitation of current research on determining material integrity through existing techniques of aging experiments and also explores the latest development. Important improvements are suggested in terms of materials development and testing procedures to meet the existing knowledge in the literature.

Background: Physical activity (PA) has paramount importance for achieving good health and an active lifestyle among university students. Quality physical education (QPE) program ensures the attainment of sustainability in PA. Motivation can be considered a critical factor in promoting PA in students. However, motivation alone cannot bring inclusivity unless quality aspects are not being incorporated thoughtfully into physical education (PE) programs. Aims: As such this study aimed at examining three research questions: i) do the motive of PA participation can be enhanced through the quality provision of PE programs in university settings ii) does the quality provision of PE help promote sustainable PA among adolescents? and iii) whether or not this carry-over process is influenced by gender. Methods: This cross-sectional study recruited N = 610 (male = 467) & female = 143) university students. Students who studied PE as one of their course subjects were only included in this study. They participated in > 27 different sports and had a mean age of 20.76 (SD = 3.47) years and a mean of 4.70 (SD = 4.93) years of athletic experience. Descriptive (mean, SD) statistics, Pearson’s correlation, and regression analysis were used to meet the objectives. To examine the variables’ differences in gender, data were then computed using a 2 (Gender) by 2 (Type of Sport: Individual vs. Team) MANCOVA, with the covariate being age. Results: The factors provided sound reliability scores and highlighted positive correlations between QPE and exercise needs satisfaction. However, the factors lacked establishing correlations with PA. The perceived competence for exercise needs satisfaction reported differences in sexes, with the male being scored higher. Furthermore, QPE did not show any significant differences in gender. In comparison to females, males showed higher mean scores in the PA. Conclusion: The provision of QPE is identified as a pivotal factor in determining the competence of exercise satisfaction among students. QPE provision was adequate in the university, however, it could not promote PA among females as expected.

Groundwater (GW) flooding mechanisms differ from river flooding both spatially and temporally, and preventative methods against groundwater flooding must take this into account. Although groundwater flooding caused by river water rise occurs seldom, it can occasionally become severe and last for a long time if the river is significantly flooded. In the southwest portion of the research domain, Friedrichshafen with a few urban communities, the level of the groundwater table was discovered to be roughly 1 m below the surface. It was discovered that the urban settlement area only has one-story buildings. In the study region, it is typical for the single-story building's foundation bottom level to extend up to a depth of about 1.5 meters. Therefore, flood mitigation methods are taken into account for the southwest portion of the study region. The installation of a pumping well, drainage, and a barrier in the affected area are three different flood control strategies that are taken into consideration for the study area. From a technical and cost-benefit perspective, installing a pumping well that withdraws water and lowers the groundwater table was found to be the most effective flood control measure locally in a small region (e.g., 1km x 1km). By contrast, removing groundwater by building drainage and barriers was also shown to be ineffective to lower the groundwater table over an extended region and was significantly more expensive than the installation of wells. Additionally, when river flooding is taken into account compared to the default scenario where no intake of water from the river is included along the western border of the study area, it is discovered that the spread of pollution is significantly greater.

River renaturation can be an effective management method for restoring the floodplain's natural capacity and minimizing the effects during high flow periods. A 1D-2D HEC-RAS model, in which the flood plain was considered as 2D and the main channel as 1D, was used to simulate flooding in the restored reach of the Spree River. When computing in this model, finite volume and finite difference approximations using the Preissmann approach are used for the 1D and 2D models, respectively. To comprehend the sensitivity of the parameters and model, several scenarios were simulated using different time steps and grid sizes. Additionally, dykes, dredging, and changes to the vegetation pattern have been used to simulate flood mitigation measures. The model predicted that flooding would occur mostly in the downstream portion of the channel in the majority of the scenarios without mitigation measures, whereas with mitigation measures, flooding in the floodplain would be greatly reduced. By preserving the natural balance on the channel's floodplain, the restored area needs to be kept in good condition. Therefore, mitigating measures that balance the area's economic and environmental aspects must be considered in light of the potential for floods.

Crack inspection is important to monitor the structural health of pavement structures and to facilitate an easier rehabilitation process. Currently, pavement crack inspection is conducted manually, which is inefficient and costly at the same time. For solving the problem, this work has developed a robotic system for automated data collection and analysis in real-time. The robotic system navigates on the pavement and collects visual images from the surface. A deep learning-based semantic segmentation framework named RCDNet was proposed and implemented on the onboard computer of the robot to identify cracks from the visual images. Simulation results show that the deep learning model obtained 96.29% accuracy for predicting the images. The proposed robotic system was tested on both indoor and outdoor environments and was observed that it can complete inspecting a 3m × 2m grid within 10 minutes and a 2.5m × 1m grid within 6 minutes. This outcome shows that the proposed robotic method can drastically reduce the time of manual inspection. Furthermore, a severity map based on the results from visual images was also generated to provide an idea of which locations should be paid more attention to repair in a test grid.

Crack inspection in railway sleepers is crucial for ensuring rail safety and avoiding deadly accidents. Traditional methods for detecting cracks on railway sleepers are very time-consuming and lack efficiency. Therefore nowadays, researchers are paying attention to the vision-based algorithm, especially Deep Learning algorithms. In this work, we adopted the U-net for the first time for detecting cracks on a railway sleeper and proposed a modified U-net architecture named Dense U-net for segmenting the cracks. In the Dense U-net structure, we established several short connections between the encoder and decoder blocks, which enabled the architecture to obtain better pixel information flow. Thus, the model extracted the necessary information in more detail to predict the cracks. We collected images from railway sleepers, processed them in a dataset, and finally trained the model with the images. The model achieved an overall F1-score, precision, Recall, and IoU of 86.5% 88.53%, 84.63%, and 76.31% respectively. We compared our suggested model with the original U-net, and the results demonstrate that our model outperformed the U-net in both quantitative and qualitative results. Moreover, we considered the necessity of crack severity analysis and measured a few parameters of the cracks (e.g., length, maximum width, area, density). The engineers must know the severity of the cracks to have an idea about the most severe locations and take the necessary steps to repair the badly affected sleepers.

Natural gas combined cycle power plants (CCPPs) are widely used to meet peak loads in electric energy production. Continuous monitoring of the output electrical power of CCPPs is a requirement for power performance. In this study, the role of ambient temperature change having the greatest effect on electric production is investigated for a natural gas CCPP. The plant has generated electricity for fourteen years and setup at 240 MW in Aliağa, İzmir, Turkey. Depending on the seasonal temperature changes, the study data were obtained from each gas turbine (GT), steam turbine (ST) and combined cycle blocks (CCBs) in the ambient temperature range of 8-23°C. It has been found that decreases of the electric energy in the GTs because of the temperature increase and indirectly diminishes of the electricity production in the STs. As a result, the efficiency of each GT, ST and CCB reduced, although the quantity of fuel consumed by the controllers in the plant was decreased. As a result of this data, it has been recommended and applied that additional precautions have been taken for the power plant to bring the air entering the combustion chamber to ideal conditions and necessary air cooling systems have been installed.

Beyond their significant contribution to the dietary and industrial supplies, marine algae are considered to be a potential source of some unique metabolites with diverse health benefits. The pharmacological properties, such as antioxidant, anti-inflammatory, cholesterol homeostasis, protein clearance and anti-amyloidogenic potentials of algal metabolites endorse their protective efficacy against oxidative stress, neuroinflammation, mitochondrial dysfunction, and impaired proteostasis which are known to be implicated in the pathophysiology of neurodegenerative disorders and the associated complications after cerebral ischemia and brain injuries. As was evident in various preclinical studies, algal compounds conferred neuroprotection against a wide range of neurotoxic stressors, such as oxygen/glucose deprivation, hydrogen peroxide, glutamate, amyloid β, or 1-methyl-4-phenylpyridinium (MPP+) and, therefore, hold therapeutic promise for brain disorders. While a significant number of algal compounds with promising neuroprotective capacity have been identified over the last decades, a few of them have had access to clinical trials. However, the recent approval of an algal oligosaccharide, sodium oligomannate, for the treatment of Alzheimer's disease enlightened the future of marine algae-based drug discovery. In this review, we briefly outline the pathophysiology of neurodegenerative diseases and brain injuries for identifying the targets of pharmacological intervention, and then review the literature on the neuroprotective potentials of algal compounds along with the underlying pharmacological mechanism, and present an appraisal on the recent therapeutic advances. We also propose a rational strategy to facilitate algal metabolites-based drug development.

Green products have excellent potential for discovering and producing new medicinal products. In recent years, there is a growing interest towards the green synthesis of metal nanoparticles, particularly from plants sources. This eco-friendly approach was used in the recent research to biosynthesize zinc oxide nanoparticles (ZnO NPs) from Cissus antractica plant. The present study aims to examine the cell cytotoxicity, cell death, and pathways of apoptosis in lung cancer cells (A549) and inflammation properties treated with biosynthesized ZnO NPs. Additionally, synthe-sized ZnO nanoparticles were characterized using UV–vis spectroscopy, X-ray diffraction (XRD), Transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FT-IR), and Energy-dispersive X-ray spectroscopy (EDS). The XRD and TEM analyses exhibited 31 nm as the size of synthesized nanoparticles, the pure crystal form of ZnO NPs, and the shape of the NPs as nearly spherical and hexagonal quartzite. The MTT assay used for cytotoxicity evaluation de-picted the significant toxic effect of CA-ZnONPs against the A549 lung cancer cells at concentra-tions up to 20 µg/mL than non-cancerous cells. Furthermore, we observed an elevated ROS level in cancer cells. These NPs also demonstrated dose-dependent ability to suppress colony for-mation and cell migration, which increases their potential as a lung cancer treatment. Further-more, The NPs formulation's ability to induce apoptosis in cancer cells was further supported by Hoechst and propidium iodide dye. Further, CA ZnO NPs increased the gene expression of BAX, Cyto-c, Caspase 3 and 9, but decreased the expression of Bcl-2, indicating that the nanoformulation triggered mitochondrial-mediated apoptosis. Besides, this study showed that NPs suppressed in-flammatory responses by subsequently decreasing reactive oxygen species (ROS) generation, downregulating the expression of the pro-inflammatory cytokines TNF-α, iNOS, COX-2, IL-6, IL-8, and NO. Moreover, the study's findings imply that Cissus antractica are a potential source with biosynthesize nanoparticles that can might be further investigated for the progress of an-ti-inflammatory and anti-cancer drugs with further study.

The novel coronavirus disease (COVID-19) pandemic is provoking a prevalent consequence on mental health because of less interaction among people, economic collapse, negativity, fear of losing jobs, and death of the near and dear ones. To express their mental state, people often are using social media as one of the preferred means. Due to reduced outdoor activities, people are spending more time on social media than usual and expressing their emotion of anxiety, fear, and depression. On a daily basis, about 2.5 quintillion bytes of data are generated on social media, analyzing this big data can become an excellent means to evaluate the effect of COVID-19 on mental health. In this work, we have analyzed data from Twitter microblog (tweets) to find out the effect of COVID-19 on peoples mental health with a special focus on depression. We propose a novel pipeline, based on recurrent neural network (in the form of long-short term memory or LSTM) and convolutional neural network, capable of identifying depressive tweets with an accuracy of 99.42%. Preprocessed using various natural language processing techniques, the aim was to find out depressive emotion from these tweets. Analyzing over 571 thousand tweets posted between October 2019 and May 2020 by 482 users, a significant rise in depressing tweets was observed between February and May of 2020, which indicates as an impact of the long ongoing COVID-19 pandemic situation.

The environmental issues we are currently facing require long-term prospective efforts for sustainable growth. Renewable energy sources seem to be one of the most practical and efficient alternatives in this regard. Understanding a nation's pattern of energy use and renewable energy production is crucial for developing strategic plans. No previous study has been performed to explore the dynamics of power consumption with the change in renewable energy production on a country-wide scale. In contrast, a number of deep learning algorithms demonstrated acceptable performance while handling sequential data in the era of data-driven predictions. In this study, we developed a scheme to investigate and predict total power consumption and renewable energy production time series for eleven years of data using a Recurrent Neural Network (RNN). The dynamics of the interaction between the total annual power consumption and renewable energy production are investigated through extensive Exploratory Data Analysis (EDA) and a feature engineering framework. The performance of the model is found satisfactory through the comparison of the predicted data with the observed data, visualization of the distribution of the errors and Root Mean Squared Error (RMSE) value of 0.084. Higher performance is achieved through the increase in the number of epochs and hyperparameter tuning. The proposed framework can be used and transferred to investigate the trend of renewable energy production and power consumption and predict the future scenarios for different communities. Incorporation of the cloud-based platform into the proposed pipeline may lead to real-time forecasting.

River flow prediction is a pivotal task in the field of water resource management during the era of rapid climate change. The highly dynamic and evolving nature of the climatic variables e.g., precipitation has a significant impact on the temporal distribution of the river discharge in recent days making the discharge forecasting even more complicated for diversified water-related issues e.g., flood prediction and irrigation planning. To predict the discharge, various physics-based numerical models are used using numerous hydrologic parameters. Extensive lab-based investigation and calibration are required to reduce the uncertainty involved in those parameters. However, in the age of data-driven predictions, several deep learning algorithms showed satisfactory performance in dealing with sequential data. In this research, Long Short-term Memory (LSTM) neural network regression model is trained using over 80 years of daily data to forecast the discharge time series up to 3 days ahead of time. The performance of the model is found satisfactory through the comparison of the predicted data with the observed data, visualization of the distribution of the errors and Root Mean Squared Error (RMSE) value of 0.09. Higher performance is achieved through the increase in the number of epochs and hyper parameter tuning. This model can be transferred to other locations with proper feature engineering and optimization to perform univariate predictive analysis and potentially be used to perform real-time river discharge prediction.

The COVID-19 pandemic has wreaked havoc on the whole world, taking over half a million lives and capsizing the world economy in unprecedented magnitudes. With the world scampering for a vaccine, early detection and containment is the only redress. Existing diagnostic technologies with high accuracy like RT-PCRs are expensive and sophisticated, requiring skilled individuals for specimen collection and screening, resulting in lower outreach. So, methods excluding direct human intervention are much sought after, and artificial intelligence-driven automated diagnosis, especially with radiography images, captured the researchers' interest. This survey marks a detailed inspection of the deep-learning-based automated detection of COVID-19 works done to date, a comparison of the available datasets, methodical challenges like imbalanced datasets, and others, along with probable solutions with different pre-processing methods, and scopes of future exploration in this arena. We also benchmarked the performance of 315 deep models in diagnosing COVID-19, Normal, and Pneumonia from x-ray images of a custom dataset created from four others. The dataset is publicly available at https://github.com/rgbnihal2/COVID-19-X-ray-Dataset. Our results show that DenseNet201 model with Quadratic SVM classifier performs the best (accuracy: 98.16%, sensitivity: 98.93%, specificity: 98.77%) and maintains high accuracies in other similar architectures as well. This proves that even though radiography images might not be conclusive for radiologists, but it is so for deep learning algorithms for detecting COVID-19. We hope this extensive review will provide a comprehensive guideline for researchers in this field.

CCNs are specific type of matricellular proteins, which are essential signaling molecules, and play multiple roles in multicellular eukaryotes. This family of proteins consists of six separate members in mammals. The architecture of CCN proteins is multimodular and comprises four distinct motifs. CCN proteins achieve their specific physiological functions by binding to integrin receptors. The CCN family has been implicated in both cure and disease with impacts on biological interactions, such as cell adhesion, chemotaxis and migration, mitogenesis, cell survival, angiogenesis, differentiation, tumorigenesis, immune functions, chondrogenesis, and wound healing. Breast cancer is the most commonly diagnosed cancer worldwide and the leading cause of cancer mortality among women triggered by atypical expression of CCNs. A favorable or unfavorable association between various CCNs has been reported in patients with breast carcinomas. Aberrant expression of CCN1 intensifies the proliferation of epithelial cells that line the lobes and ducts of the breast. Evidence also shows that the expression of CCN2 can ameliorate tumor growth and metastasis. However, CCN3 (NOV), CCN5 (WISP-2), and CCN6 (WISP-3) are consistent with neoplastic development and metastasis repression. Particular CCN members can develop tumors and cancer progression, whereas others can competitively counter the processes. Several studies have been conducted on CCN proteins and cancer in recent years. In our study, we intend to provide an overview of those research works while keeping breast carcinoma on focus. We believe that the importance of the CCN protein family in breast cancer should be reconsidered.

Curcumin is one of the bioactive metabolites of turmeric (Curcuma longa), known for its pleiotropic pharmacological actions, including antioxidant and anti-inflammation, anticholinesterase, immunomodulation, and neuroprotection. Substantial evidence suggests the therapeutic benefits of curcumin against neurodegenerative disorders, including Alzheimer’s disease (AD), acting on a diverse array of brain targets that make the molecular mechanisms complicated. System biology level-investigation could potentially present a comprehensive molecular mechanism to delineate the neuropharmacological action of curcumin. In this study, we used integrated system pharmacology and molecular simulation analysis to gain insights into the underlying mechanism of curcumin action against AD. Network pharmacology study identified curcumin-targeted potential cellular pathways such as phosphatidylinositol 3-kinase/protein kinase B (PI3K/Akt) signaling, neurotrophin signaling, toll-like receptor (TLR) signaling, and autophagy, and proteins such as tropomyosin receptor kinase B (TrkB), liver X-receptor-beta (LXR-β), estrogen receptor-β (ER-β), mammalian target of rapamycin (mTOR), TLR-2, N-methyl-D-acetate receptor subunit 2B (GluN2B), β-secretase and glycogen synthase kinase-3β (GSK-3β), which are intimately associated with neuronal growth and survival, immune response, and inflammation. Moreover, the molecular modeling further verified that curcumin showed a significant binding affinity to mTOR, TrkB, LXR-β, TLR-2, ER-β, GluN2B, β-secretase, and GSK-3β, which are the crucial regulators of molecular and cellular processes associated with AD. Together, the present system pharmacology and in silico findings demonstrate that curcumin might play a significant role in modulating AD-pathobiology, supporting its therapeutic application for the prevention and treatment of AD.

During the last decade, Bangladesh has been experienced a significant climatic anomalies which lead to an increase in magnitude and frequency of various climate relate extreme events. Climate scientists substantiate that global temperature and precipitation pattern is expected to change, which may result in consequential impact on agriculture, livelihood, and ecosystem. Bangladesh is therefore likely to face substantial challenges in the coming decades. In order to adequately understand this complex, dynamic phenomena, Analyzing historical Climate change scenarios as well as projecting its future trends is a great concern for researcher. This study aims to analyzes/ historical climatic data from (1901-2020), and predict future temperature and precipitation patterns in Bangladesh using CMIP6 data. Data used in this study (Observed data is from CRU TS 4.05 and future data is from CMIP6) have been acquired from WorldClim v2.1. Various methods including correlation, regression, standard deviation, correlation matrix, percentiles, cell statistics, and IDW interpolation were performed to analyze the trends, variability and spatial patterns of temperature and rainfall. This study revealed that Over the historical study period (1901-2020) Bangladesh has been experienced a significant warming trend with an average increase in temperature 2°C and with annual decline of the total precipitation 607.26 mm along with a shift towards drier conditions despite weak correlation with hotter years. Projected climate models represents that Bangladesh minimum temperature is expected to increase from 1°C to 4.4°C as well as maximum temperatures from 1°C to 4.1°C by 2100. Moreover, projected precipitation is expected to increase by 480.38 mm, with the biggest rises during monsoon months. Regional variations in temperature and precipitation are again expected, with the Southeast (SE) likely experiencing the most significant warming and the Northeast (NE) seeing the most substantial increase in precipitation.

Over the years, leaked fluids from the aircraft caused severe deterioration of the airfield pavement. The combined effect of hot exhaust from the auxiliary power unit of military aircraft and spilt aviation oils caused rapid pavement spalling. If the disintegrated concreted pieces caused by spalling is sucked into the jet engine, it may cause catastrophic damage to the aircraft engine or physical injury to maintenance crews. This study investigates the effectiveness of incorporating hybrid fibres into ordinary concrete to improve the residual mechanical and thermal properties to prevent spalling damage of pavement. Three fibre reinforced concrete samples made with micro steel fibre and polyvinyl alcohol fibre with a fibre content of zero, 0.3%, 0.5% and 0.7% by volume fraction. These samples were exposed to recurring high temperature and aviation oils. Tests were conducted to measure the effects of repeated exposure on the concrete's mechanical, thermal and chemical characteristics. The results showed that polyvinyl alcohol fibre reinforced concrete suffered a significant loss of thermal properties and residual mechanical strength than the micro steel fibre reinforced concrete. However, hybrid fibre reinforced concrete performed better in retaining higher residual properties, and no spalling of concrete was observed.

The mechanisms involved in immune responses to cancer have been extensively studied for several decades and, considerable attention has been paid to harnessing the immune system's therapeutic potential. Cancer immunotherapy has established itself as a promising new treatment option for a variety of cancer types. Various strategies including cancer vaccines, monoclonal antibodies (mAbs), adoptive T-cell-cancer therapy and immune test therapy have gained prominence through immunotherapy. However, it remains to be accomplished the full potential of cancer immunotherapy. In spite of having startling aspects, the cancer immunotherapies have some difficulties including the inability to effectively targeting the cancer antigens and the abnormalities in patient response. With the advancement of technology, this system has changed the genome-based immunotherapy process in the human body including generation of engineered T cells. Due to its high specificity, CRISPR-Cas9 has become a simple and flexible genome-editing tool to target nearly any genomic locus. Recently, the CD19-mediated CAR-T cell (chimeric antigen receptor T cell) therapy has opened a new avenue for the treatment of human cancer, though low efficiency is a major drawback of this process. Thus, increasing the efficiency of the CAR-T cell (engineered T cells that induce the chimeric antigen receptor) by using CRISPR-Cas9 technology could be a better weapon to fight against the cancer. In this review, we have broadly focused on the use of CRISPR-Cas9 technology for the modification of the T-cell, which can specifically recognize cancer cells and be used as immune therapeutics against cancer. We have also demonstrated the other potential strategies for the treatment of cancer.

In this paper, we introduce some basic idea of Variational iteration method for short (VIM) to solve the Volterra’s integro-differential equations. The VIM is used to solve effectively, easily, and accurately a large class of non-linear problems with approximations which converge rapidly to accurate solutions. For linear problems, it’s exact solution can be obtained by only one iteration step due to the fact that the Lagrange multiplier can be exactly identified. It is to be noted that the Lagrange multiplier reduces the iteration on integral operator and also minimizes the computational time. The method requires no transformation or linearization of any forms. Two numerical examples are presented to show the effectiveness and efficiency of the method. Also, we compare the result with the result from Homotopy perturbation method (HPM). Finally, we investigate the absolute difference between variational iteration method and homotopy perturbation method and draw the graph of difference function by using Mathematica.

Hypoxia contributes to tumor progression and metastasis, and hypoxically dysregulated RNA molecules may thus be implicated in poor outcomes. Canine oral melanoma (COM) has a par-ticularly poor prognosis, and some hypoxia-mediated miRNAs are known to exist in this cancer; however, equivalent data on hypoxically dysregulated other non-coding RNAs (ncRNAs) are lacking. Accordingly, we aimed to elucidate non-miRNA ncRNAs that may be mediated by hy-poxia, targeting primary-site and metastatic COM cell lines and clinical COM tissue samples in next generation sequencing (NGS), with subsequent qPCR validation and quantification in COM primary and metastatic cells, plasma and extracellular vesicles (EVs) for any identified ncRNA of interest. Findings suggested that a number of non-miRNA ncRNA species are hypoxically up- or downregulated in COM. We identified one ncRNA, the long ncRNA fragment EN-SCAFT00000084705.1, as a molecule of interest due to its consistent downregulation in COM tissues, hypoxically and normoxically cultured primary and metastatic cell lines, when compared to the oral tissues from healthy dogs. However, this molecule was undetectable in plasma and plasma EVs, suggesting that its expression may be tumor tissue-specific and it has little potential as a biomarker. Here, we provide evidence of hypoxic transcriptional dysregulation for ncRNAs other than miRNA in COM for the first time, and suggest that ncRNA ENSCAFT00000084705.1 is a molecule of interest for future research on the role of the transcriptome in hypoxia-mediated progression of this aggressive cancer.

Background: The Government of Bangladesh is currently providing COVID-19 vaccines free of cost, but for a massive population, the free vaccination program’s sustainability is challenging. In this regard, assessing willingness to pay can help to explore vaccine pricing, subsidizing strategy, and vaccine demand. The study aimed to evaluate the prevalence of willingness to pay (WTP) for the COVID-19 vaccine and its associated factors to ensure the sustainability of the vaccination program. Methods: A cross-sectional research design was adopted to collect data from 1497 respondents through online and face-to-face interviews. Data were analyzed using the chi-square test and point-biserial correlation for descriptive statistical analysis, and multiple logistic regression analysis was also used to identify the factors associated with the dependent variable in the study. Results: The prevalence of WTP towards a COVID-19 vaccine was 50.9 %, and mean and median WTP were respectively 754.55 BDT (US$ 8.93), 300 BDT (US$ 3.55). WTP of other religions was significantly higher than Muslims (aOR=1.5, P=0.037). WTP was also higher among Graduate (aOR=2.2, P=0.007), Masters & MPhil/PhD (aOR=2, P=0.030), higher family income group (aOR=1, P=0.039) and respondents with higher knowledge about the vaccine (aOR=1.1, P=0.003), behavioral practice (aOR=1.1, P< 0.001), higher subjective norms (aOR=1.2, P=0.009), higher anticipated regret (aOR=1.2, P=0.005) and higher perceived benefits from the vaccine (aOR=1.1, P=0.029). On the contrary, WTP is lower among respondents who had a higher negative attitude toward vaccines (aOR= 0.9, P

In this investigation dyeing of alginate fiber was carried out after cationic treatment of EPTAC (2, 3-Epoxypropyl Trimethyl Ammonium Chloride). Optimum dyeing process and parameter show good dyeing performance when alginate fiber dyed with rhubarb dye. In addition to cationic treatment is taken into account for alginate fiber to improve fastness, color strength, breaking strength. Later in dyeing for fixation ferrous sulfate, copper sulphate was considered as mordents. Moreover using pre-mordanting methods conveyed the dyeing of alginate fiber with the stave of metallic mordant and without metallic salt mordents. The evaluation of each color dyed material was done through following two terms for instance CIELAB (L*, a*, and b*) and K/S values. According to AATCC test methods color fastness to washing of the dyed fiber was determined whereas according to the ASTM D3822M standard the breaking strength of alginate fiber was estimated and tested. When dyeing was carried out on alginate fiber through considering optimum parameter like 80◦C for 90 min, M: L 1:40 and at pH 7 which showed optimum results. In addition to mostly very good wash fastness was obtained while there was no fading of the color, whereas the moderate level of color fastness to crocking was achieved. Later after dyeing the evaluations of SEM of the cationized alginate fiber and FTIR of powder from the rhubarb dye were observed. The results suggested that the surface of cationized alginate fiber was smoother than the raw alginate fiber.

Leakages in the water distribution networks (WDNs) are real problems for utilities and other governmental agencies. Timely leak detection and location identification has been a challenge. In this paper, an integrated approach to geospatial and infrared image processing method was used for robust leak detection. The method combines drops in flow, pressure, and chlorine residuals to determine potential water leakage locations in the WDN using Geographic Information System (GIS) techniques. GIS layers were created from the hourly values of these three parameters for the city of Sharjah provided by Sharjah Electricity, Water and Gas Authority (SEWA). These layers are then analyzed for locations with dropped values of each of the parameters and are overlaid with each other. In the case where there were no overlaying locations between flow and pressure, further water quality analysis was avoided, assuming no potential leak. In the case where there are locations with drops in flow and pressure layers, these overlaying locations are then examined for drops in chlorine values. If overlaying locations are found, then these regions are considered potential leak locations. Once potential leak locations are identified, a specialized remote sensing technique can be used for precise leak location. This study also demonstrated the suitability of using an infrared camera for leak detection in a laboratory-based setup. This paper concludes that the following methodology can help water utility companies in the timely detection of leaks, saving money, time, and effort.

Cesium lead iodide (CsPbI3) perovskite nanocrystals (NCs) are a promising material for red light-emitting diodes (LEDs) due to their excellent color-purity and high luminous efficiency. However, small-sized CsPbI3 colloidal NCs, such as nanocubes, used in LEDs suffer from confinement effects, negatively impacting their photoluminescence quantum yield (PLQY) and overall efficiency. Here, we introduced YCl3 into the CsPbI3 perovskite, which formed anisotropic, one-dimensional (1D) nanorods. This was achieved by taking advantage of the difference in bond energies between Cl− and I− ions, which caused YCl3 to promote the anisotropic growth of CsPbI3 NCs. The YCl3-based nanorods improved the PLQY and storage stability by passivating the defects reducing the nonradiative recombination rates. When the YCl3-substituted CsPbI3 nanorods are applied to the emissive layer in LEDs, we achieve an external quantum efficiency of ~3.16% which is 1.86-fold higher than the pristine CsPbI3 NCs (1.69%) based LED. Notably, the ratio of horizontal transition dipole moments (TDMs) in the anisotropic YCl3:CsPbI3 nanorods was determined to be 75%, which is higher than the isotropically oriented TDMs in CsPbI3 nanocrystals (67%). This increased TDM ratio led to higher light outcoupling efficiency in nanorods-based LEDs. Overall, the results suggest that YCl3-substituted CsPbI3 nanorods could be promising for achieving high-performance perovskite LEDs.

This paper proposes a position control method for low cost EGR valve system in automotive application. Generally, position control system using in automotive application has many restrictions such as cost and space, the mechanical structure of actuator implies high friction and large difference between static friction and coulomb friction. This large friction difference occurs the vibrated position control result when the controller uses conventional linear controller such as P, PI. In this paper, low cost position control method which can apply under the condition of high difference friction mechanical system. Proposed method is verified by comparing conventional control result of experiments.

The increasing demand for water in agriculture and the need for more efficient irrigation systems has led to the development of smart irrigation systems based on the Internet of Things. In this system, an Arduino microcontroller is used to control and monitor the watering of crops. The system is equipped with sensors that measure soil moisture which are used to optimize the irrigation process. The data collected by the sensors is transmitted to the Arduino, which then adjusts the watering schedule based on the information received. The use of IoT in smart irrigation systems provides several benefits, including reduced water waste, increased crop yields, and improved plant health. The implementation of this system using an Arduino platform is relatively simple, cost-effective, and can be easily integrated into existing irrigation systems. Overall, the use of IoT in smart irrigation using an Arduino platform has the potential to revolutionize the way we manage water resources in agriculture.

Being a chilling-sensitive staple crop, rice (Oryza sativa L.) is vulnerable to climate change. The competence of rice to withstand chilling stress should, therefore, be enhanced through technological tools. The present study employed chemical intervention like application of sodium nitroprusside (SNP) as nitric oxide (NO) donor and elucidated the underlying molecular mechanisms of NO-mediated chilling tolerance in rice. At germination stage, germination indicators were interrupted by chilling stress (5.0 ± 1.0°C for 8 h day‒1), while pretreatment with 100 μM SNP markedly improved the indicators. At seedling stage (14-day-old), chilling stress caused stunted growth with visible toxicity along with alteration of biochemical markers, for example, increase in oxidative stress markers (superoxide, hydrogen peroxide, and malondialdehyde) and osmolytes (total soluble sugar; proline and soluble protein content, SPC), and decrease in chlorophyll (Chl), relative water content (RWC), and antioxidants. However, NO application attenuated toxicity symptoms with improving growth performance which might be attributed to enhanced activities of antioxidants, mineral contents, Chl, RWC and SPC. Furthermore, principal component analysis indicated that water imbalance and increased oxidative damage were the main contributors to chilling injury, whereas NO-mediated mineral homeostasis and antioxidant defense were the critical determinants for chilling tolerance in rice. Collectively, our findings revealed that NO protects against chilling stress through valorizing cellular defense mechanisms, suggesting that exogenous application of NO could be a potential tool to evolve cold tolerance as well as climate resilience in rice.

Risedronate sodium (RIS) possesses very low bioavailability and several adverse effects in the gastrointestinal tract when administered through an oral route. Thus, this necessitates the need to develop novel formulation. Hence, we had developed RIS-HA-TCS loaded mPEG coated nanoparticles for the treatment of osteoporosis. Chitosan was used to synthesize thiolated chitosan and its characterization was done using DSC and FTIR. Ellman's reagent was used to measure the degree of thiol immobilization. The RIS-HA fabrication was done and was further conjugated with the synthesized TCS. The Box-Behnken design process was used for designing fifteen batches of RIS-HA-TCS nanoparticles, which were formulated by ionic gelation procedure in which tripolyphosphate (TPP) was used as a crosslinking agent. Moreover, RIS and RIS-HA-TCS in-silico activity was compared for farnesyl pyrophosphate synthetase enzyme. The obtained results revealed that the binding affinity of RIS was much more than the conjugated RIS. Successful docking results paved the way for thiolation of chitosan with RIS. The drug entrapment efficiency (%EE), particle size and Polydispersity index (PDI) of RIS-HA-TCS nanoparticles obtained were 85.4 ±2.21%, 252.1 ±2.44 nm and 0.2± 0.01 respectively. The particle size, PDI, and encapsulation efficiency of RIS-HA-TCS were reported to be 264.9 ±1.91 nm, 0.120± 0.01, and 91.1 ±1.17%, respectively, after being further conjugated with mPEG. TEM showed the spherical particle size of RIS-HA-TCS and RIS-HA-TCS-mPEG. The in-vitro release of RIS-HS-TCS-mPEG was found to be significantly higher (95.13±4.64%) as compared to RIS-HA-TCS (91.74 ± 5.13%), RIS suspension (56.12 ± 5.19%) and marketed formulation (74.69 ± 3.98%). In an ex-vivo gut permeation study, RIS-HA-TCS-mPEG nanoparticles was found to have an apparent permeability of 0.5858×10-1 cm/min which was better than the apparent permeabilities of RIS-HA-TCS formulation (0.4011 ×10-4cm/min), RIS suspension (0.2005 ×10-4 cm/min) and marketed preparation (0.3401 ×10-4 cm/min)..

In sheep raised for meat production, the relationship between external udder conformation, colostrum quality, and lamb growth rates has not received much attention. We hypothesize that ewes with a more desirable udder conformation at lambing have greater colostrum quality and increased growth rates in lambs. Fifty Suffolk ewes were used in this study. Within 6-8 hours of parturition, colostrum samples from both halves of the udder were collected and a visual scoring of the udder was conducted. Colostrum quality was measured for total protein using both optical and Brix refractometers. On day 2, day 45, and day 60 after parturition, lamb weights were recorded, and udder conformation measurements were repeated. A visual scoring system evaluating udder floor (scale 1-4), udder depth (scale 1-9), teat placement (scale 1-9), teat lesions (present or absent), and the presence of wool (present or absent) was used to assess external udder conformation. Normal udder parameters include udder depth scores of 5 or 6, udder floor score of 1 or 2, teat placement scores 4, 5, and 6, and the absence of teat lesions and wool. All ewes not meeting normal parameters were considered to have an abnormal udder. The data was analyzed using the GLM procedure. Mean total colostrum total protein was greater (p = 0.03) in ewes displaying ‘normal’ udder conformation compared with those with ‘abnormal’ (14.82±0.5 and 13.31±0.3mg/dl). Mean Brix values were also greater (p = 0.03) for ewes with a ‘normal’ udder compared to an abnormal udder confirmation, respectively (21.70±0.8 and 19.54±0.5). On day 2 after parturition, mean lamb body weight was not different between ewes with ‘normal’ and abnormal udder (5.38±0.26 vs 5.46±0.15). No difference (p > 0.05) in lamb weights were detected between ewes with normal and abnormal udder conformations on day 45 and 60 after parturition. This data provides evidence of increased colostrum total protein values and increased Brix values present in ewes with ‘normal’ udder conformation and no difference in lamb weights between udder conformations.

The COVID-19 pandemic has affected millions of people globally, with respiratory organs being strongly affected in individuals with comorbidities. Medical imaging-based diagnosis and prognosis have become increasingly popular in clinical settings to detect COVID-19 lung infections. Among various medical imaging modalities, ultrasound stands out as low-cost, mobile, and radiation-safe imaging technology. In this comprehensive review, we focus on ultrasound-based AI studies for COVID-19 detection that use public or private lung ultrasound datasets. We surveyed articles that used publicly available lung ultrasound datasets for COVID-19 and reviewed publicly available datasets and organize ultrasound-based AI studies per dataset. We analyzed and tabulated studies in several dimensions, such as data preprocessing, AI models, cross-validation, and evaluation criteria. In total, we reviewed 42 articles, where 28 articles used public datasets, and the rest used private data. Our findings suggest that ultrasound-based AI studies for the detection of COVID-19 have great potential for clinical use, especially for children and pregnant women. Our review also provides a useful summary for future researchers and clinicians who may be interested in the field.

Understanding the dynamics of land use and land cover (LULC) change in today's context of rapid urbanization is critical for sustainable urban planning and environmental conservation. Therefore, the research aim is to understand the LULC changes in Chattogram Metropolitan Area and to assess the policy implications of these changes for sustainable urban development. Through a comparative analysis of LULC maps for two periods (1997–2007; 2007–2017), we investigated the transformation of a detailed planning zone before and after detailed area plan (DAP) approval. Using a mixed-method approach integrating quantitative data with policy analysis, we elucidated the impacts of urbanization trends on local ecosystems—specifically the conversion of forest cover and waterscape use. The findings reveal a significant conversion of forested and waterscape areas to urban and peri-urban landscapes, highlighting the urgent need for sustainable planning interventions that focus on these peri-urban areas. The study further critiques the DAP's effectiveness, revealing a disconnect between regional policy implementation and local outcomes. This research proposes a validated, scalable framework for urban master plans that adapts to the complex socio-ecological contexts of rapidly urbanizing regions.

Rigid pavements at military airfields experience surface deterioration within 6-18 months of construction. The cause of this degradation is mainly due to combined exposure to repeated heat shocks from jet engine exhaust and spilled aviation oils (hydrocarbons). Surface degradation occurs in the form of disintegration of aggregates and cement paste into small pieces that pose severe risks of physical injury to maintenance crews or damage to an aircraft engine. Since coarse aggregates typically occupy 60-80% of the concrete volume, aggregates' thermal properties and microstructure should play a crucial role in the degrading mechanism. At high temperatures, concrete with lightweight aggregates is reported to have better performance compared to concrete with normal-weight aggregate. Thus, the present study carried out a detailed investigation of the mechanical and thermal performance of lightweight aggregate concrete exposed to the combined effects of high temperature and hydrocarbon oils simultaneously. To identify the resistance of different concrete with various lightweight coarse aggregates, pumice, perlite, lytag (sintered fly ash), and crushed brick were used as lightweight coarse aggregates in concrete. Also, basalt aggregate concrete was used as a reference. After cyclic exposures, all specimens were tested for residual mechanical, thermal, chemical, and microstructural properties. Overall, concrete with crushed brick aggregate and LYTAG used in this study showed superior resistance to the simulated airfield conditions.

From 2008 to 2024, the Newborn Screening Translational Research Network (NBSTRN), part of the National Institute of Child Health and Human Development (NICHD) Hunter Kelly Newborn Screening Program, served as a robust infrastructure to facilitate groundbreaking research in newborn screening (NBS), rare disease, and genomics. Over fifteen years, NBSTRN developed into a significant international network, supporting innovative research on novel technologies to screen, diagnose, treat, manage, and understand the natural history of more than 280 rare diseases. A key component of these efforts has been the development of resources and expertise for the newborn screening community in ethical, legal, and social issues (ELSI). This paper presents findings from a survey conducted by the NBSTRN team with input from one of theNBSTRN's expert workgroups, the Bioethics and Legal Workgroup. With responses from 88 members of the NBS community including researchers and state NBS programs, the survey found that individuals rely on internal and collegial ELSI resources and highlighted a substantial demand for structured, accessible training and resources. The survey’s insights emphasize the importance of privacy and informed consent in NBS research, and suggested a need for improved collaborative tools and educational programs focused on ELSI for the NBS community. The survey results may inform future efforts in ELSI and NBS research including the development of expanded ELSI tools that leverage digital platforms and consultative services.

Molecular dynamics(MD) simulations are playing an increasingly important role in structure-based drug discovery (SBDD). Here we review the use of MD for proteins in aqueous solvation, organic/aqueous mixed solvents (MDmix) and with small ligands, to the classic SBDD problems: binding mode and binding free energy predictions. The simulation of proteins in their condensed state reveals the solvent structure and preferential interaction sites (hot spots) on the protein surface. This information is largely transferable across all classes of protein ligands (from water to drugs) and can be used very effectively to understand ligand recognition and improve the predictive capability of well-established methods such as molecular docking. MD simulations for protein and drug or drug-like compounds are now being used but are still computationally expensive and can only be applied to specific cases. On the other hand, MDmix simulations can now be used in SBDD and we will describe the latest developments and implementations. We expect to see an increase in the application of these techniques to a plethora of protein targets to identify new drug candidates with the advent of new tools and faster computers.

Skin cancer is an exquisite disease globally nowadays. Because of the poor contrast and apparent resemblance between skin and lesions, automatic identification of skin cancer is complicated. The rate of human death can be massively reduced if melanoma skin cancer can be detected quickly using dermoscopy images. In this research, an anisotropic diffusion filtering method is used on dermoscopy images to remove multiplicative speckle noise and the fast-bounding box (FBB) method is applied to segment the skin cancer region. Furthermore, the paper consists of two feature extractor parts. One of the two features extractor parts is the hybrid feature extractor (HFE) part and another is the convolutional neural network VGG19 based CNN feature extractor part. The HFE portion combines three feature extraction approaches into a single fused feature vector: Histogram-Oriented Gradient (HOG), Local Binary Pattern (LBP), and Speed Up Robust Feature (SURF). The CNN method also is used to extract additional features from test and training datasets. This two-feature vector is fused to design the classification model. This classifier performs the classification of dermoscopy images whether it is melanoma or non-melanoma skin cancer. The proposed methodology is performed on two ordinary datasets and achieved the accuracy 99.85%, sensitivity 91.65%, and specificity 95.70%, which makes it more successful than previous machine learning algorithms.

In this study, the effects of grain size and gradation of riprap, overtopping flow depth and downstream slope of embankment on scouring and deposition characteristics at the downstream toe of the embankment was investigated. For the experiment, three different downstream slopes (1:2, 1:3, and 1:4), three different overflow depths (1, 2, and 3 cm), and three different sizes (d₅₀ of 16.41 mm, 8.48 mm, and 3.39 mm herein referred as No.5, 6 and 7 respectively) of riprap particles, respectively, were used in the laboratory. The experimental results demonstrated that the scour depth and deposition height increased with increasing energy head for each downstream slope condition. Among the three particle sizes, for No. 5 size particle shows the lowest scour depth and highest deposition height. For the 1:2 slope, the No. 5 particle size could resist scour 62% and 75% less than that of the No. 6 and No. 7 particles, respectively. For the 1:3 slope case, this was 31% and 46%, and for the 1:4 slope case, this was 39% and 49% less than the No. 6 and No. 7 size particles, respectively.

In this project, four of fibers Bragg gratings were fabricated by injecting different volumes of liquids (star line Glass Mechanix optical adhesive material, olive oil diluted with ethanol) into the hollow core fiber. The amplitude splitting interferometric technique with a high resolution specially designed translation stage was used for the fabrication process. The fabrication was done using ultraviolet laser operated at wavelength 405nm. The fabricated Bragg length of the four fibers is equal to 3.8 cm. The results presented fiber Bragg grating (FBG) with successful fabrication at 653.3 nm Bragg reflected wavelength.

Although numerous articles have been published to address drivers or barriers of corporate social responsibility (CSR), some parts of the world have received less attention. In this study, I reviewed the literature, from 2010 to 2021, to identify drivers and barriers of CSR in the the Middle East and North Africa (MENA) region and compare them with the findings in western countries. (2) Methods: For this study, I used a structured literature review method. By setting the inclusion and exclusion criteria, only 28 articles remained from selected database; (3) Results: The findings revealed some CSR drivers, such as leadership styles, profitability, reputation, moral commitment, and environmental conservation are common in both regions. There are also some differences between CSR drivers, for example religious beliefs, low concentration of ownership, and company characteristics are some of the drivers in the MENA region. Maintaining social license to operate, avoiding the risks of community opposition, pressure from the government, and consumer demand tend to be more important in western countries. Common barriers in both regions are lack of financial resources, cost, lack of CSR knowledge and awareness, and ownership concentration. This review also highlighted that lack of law enforcement, lack of stakeholder communication, lack of management commitment, lack of interests, corruption, and financial debts are some of the addressed barriers of CSR in the MENA region, while cost/benefit ratio, lack of customer interest, and lack of scientific frameworks are the special barriers in western countries. (4) Conclusions: While researchers in western countries have more focus on energy sector, there is a lack of research about drivers and barriers of CSR in the MENA region in several industries, including oil and gas.

Survivability is a critical concern in WSNs, heavily influenced by energy efficiency. Addressing severe energy constraints in WSNs requires solutions that meet application goals while prolonging network life. This paper presents an energy optimization approach (EOAMRCL) for WSNs, integrating the Grey Wolf Optimization (GWO) for enhanced performance. EOAMRCL aims to enhance energy efficiency by selecting the optimal duty-cycle schedule, transmission power, and routing paths. The proposed approach employs a centralized strategy using a hierarchical network architecture. During the cluster formation phase, an objective function, augmented with GWO, determines the ideal cluster heads (CHs). The routing protocol then selects routes with minimal energy consumption for data transmission to CHs, using transmission power as a metric. In the transmission phase, the MAC layer forms a duty-cycle schedule based on cross-layer routing information, enabling nodes to switch between active and sleep modes according to their network allocation vectors (NAV). This process is further optimized by an enhanced CSMA/CA mechanism, which incorporates sleep/activate modes and pairing nodes to alternate between active and sleep states. This integration reduces collisions, improves channel assessment accuracy, and lowers energy consumption, thereby enhancing overall network performance. EOAMRCL was evaluated in a MATLAB environment, demonstrating superior performance compared to EEUC, DWEHC, and CGA-GWO protocols, particularly in terms of network lifetime and energy consumption. This highlights the effectiveness of integrating GWO and the updated CSMA/CA mechanism in achieving optimal energy efficiency and network performance.

Only languages with abundant resources are given the opportunity to build speech recognition systems, whereas low resource languages are disregarded. This project attempts to create a system that can normally convert speech to text in the Myanmar (Burmese) language, a language part of low resource languages. The Burmese language is extremely intricate and is made up of vowels, consonants, tones, and stress. There are 10 numbers, 12 vowels, and 33 letters in the Myanmar alphabet. Deep learning allows for the evolution of numerous algorithms while eradicating ignorance and even low-resource languages may be turned into speech-to-text systems with a small quantity of data. The procedures required to construct a successful speech recognition system that can assist both the corporate sector and society will be covered in this project, including data collecting, preprocessing, modeling, prototyping, assessment, and ultimately deployment.

Multidrug resistant organisms (MDROs) outbreaks have been steadilyincreasing in Intensive care units (ICUs). Still, healthcare institutions and workers (HCW) reached no unanimity on how and when implementing infection prevention and control (IPC) strategies. We aimed to provide a pragmatic, physician practice-oriented, resume of strategies towards different MRDOs outbreaks in ICU. We performed a narrative review on IPC in ICUs, investigating patient-to-staff ratios, education, isolation, decolonization, screening and hygiene practices, outbreak reporting, cost-effectiveness, reproduction-number(R0), and future perspectives. The most effective IPC strategy remains unknown. Most studies focus on a specific pathogen or disease, making the clinician losing the big picture. IPC strategies proved their cost-effectiveness regardless typology, country, or pathogen. A standardized, universal, pragmatic protocol for HCW education should be elaborated. Likewise, a rapid outbreak recognition tool elaboration (i.e., an easy-to-use mathematical model) would improve early diagnosis and spreading prevention. Further studies are needed to express in favor or against MDROs decolonization. New promising strategies are emerging and need to be tested in the field. The lack of IPC strategies application has made, and still makes ICUs a major MDROs reservoir into the community. In a not-too-distant future genetic engineering and phage therapies could represent a plot-twist in MDROs IPC strategies.

Despite the effectiveness of insulin injections in managing hyperglycemia in Type 1 Diabetes, they fall short in addressing autoimmunity and regenerating damaged islets. This review aims to explore the potential of various treatment modalities for T1DM, including mesenchymal stem cells (MSCs), MSC-derived exosomes, gene therapy, islet allotransplantation, and pancreatic islet cell transplantation. Results: MSCs demonstrate efficacy in T1DM treatment through immunomodulation and tissue regeneration, although further research is warranted to optimize their therapeutic potential. Gene therapy presents a promising approach despite challenges such as donor shortage and immune rejection. Pancreatic islet cell transplantation emerges as a viable option, albeit with associated risks including graft rejection and the need for immunosuppression. Teplizumab, an FDA-approved humanized monoclonal antibody, revolutionizes the treatment landscape of Type 1 Diabetes by significantly delaying its onset, offering a paradigm shift since the discovery of insulin Conclusion: Ongoing studies and technological advancements in T1DM management offer a promising outlook for improved treatments and possibly even eradication on a global scale. MSCs, MSC-derived exosomes, gene therapy, and pancreatic islet transplantation hold considerable potential.

Contact tracing has become an indispensable tool of various extensive measures to control the spread of COVID-19 pandemic due to novel coronavirus. This essential tool helps to identify, isolate and quarantine the contacted persons of a COVID-19 patient. However, the existing contact tracing applications developed by various countries, health organizations to trace down the contacts after identifying a COVID-19 patient suffers from several security and privacy concerns. In this work, we have identified those security and privacy issues of several leading contact tracing applications and proposed a blockchain-based framework to overcome the major security and privacy challenges imposed by the applications. We have discussed the security and privacy measures that are achieved by the proposed framework to show the effectiveness against the security and privacy issues raised by the existing mobile contact tracing applications.

CO2 geological sequestration in coal seams can achieve the dual objectives of CO2 emission reduction and enhanced coalbed methane production, making it a highly promising carbon capture and storage technology. However, the injection of CO2 into coal reservoirs in the form of supercritical fluid (ScCO2) leads to complex physicochemical reactions with the coal seam, altering the properties of the coal reservoir and impacting the effectiveness of CO2 sequestration and methane production enhancement.In this paper, theoretical calculations based on ReaxFF-MD were conducted to study the interaction mechanism between ScCO2 and the macromolecular structure of both low-rank and high-rank coal, to address the limitations of experimental methods. The reaction of ScCO2 with low-rank coal and high-rank coal exhibits significant differences. At swelling stage, the low-rank coal experiences a decrease in aromatic structure and aliphatic structure, high-rank coal shows an increase in aromatic structure and a decrease in aliphatic structure, while swelling phenomenon is more pronounced in high-rank coal. At dissolution stage, low-rank coal is initially decomposed into two secondary molecular fragments, and then recombine to form new molecular structure, the aromatic structure increased and the aliphatic structure decreased. In contrast, high-rank coal occurs stretches-breakage-movement-reconnection, a reduction in aromatic structure and an increase in aliphatic structure.The primary reasons for these variations lie in distinct molecular structure compositions and the properties of ScCO2, leading to different reaction pathways of functional group and aromatic structure. The reaction pathways of functional groups and aromatic structures in coal can be summarized as follows: the breakage of the O-H bond in hydroxyl groups, the breakage of the C-OH bond in carboxyl groups, transformation of aliphatic structures into smaller hydrocarbon compounds or formation of long-chain alkenes, and various pathways involving broken, rearrangement, recombination of aromatic structures. In low-rank coal, there is a higher abundance of oxygen-containing functional groups and aliphatic structures. The breakage of O-H and C-OH chemical bonds results in the formation of free radical ions, while some aliphatic structures detach to produce hydrocarbons. Additionally, some of these aliphatic structures combine with carbonyl groups and free radical ions to generate new aromatic structures. Conversely, in high-rank coal, the lower content of oxygen-containing functional groups and aliphatic structures, along with stronger intramolecular forces, results in fewer chemical bond breakages and makes it less conducive to the formation of new aromatic structures.These results elucidate the specific deformations of different chemical groups, offering a molecular-level understanding of the interaction between CO2 and coal.

This study presents a prediction model based on Logistic Growth Curve to evaluate the effectiveness of Movement Control Order (MCO) on COVID-19 pandemic spread. The evaluation assesses and predicts the growth models. The estimated model is a forecast-based model that depended on partial data from the COVID-19 cases in Malaysia. The model is then studied together with the effectiveness of the three phases of MCO implemented in Malaysia. Evidence from this study suggests that results of the LGC prediction model match with the progress and effectiveness of the MCO to flatten the curve, thus helped to control the spike in number of active COVID-19 cases and spread of COVID-19 infection growth.

This research aimed to figure out the applications of HbA1c protein and HbA1 gene as the prognostic biomarkers for assessing the risks of different cancers among male T2D patients in Bangladesh considering their serological and oncoinformatic parameters. Depending on the concentrations of HbA1c (%) of the T2D patients (n=300), their individual FBS (mmol/L); THABF (mmol/L); creatinine (mg/dl); SC (mg/dl); STGs (mg/dl); HDLC (mg/dl); and LDLC (mg/dl) were estimated. The values of the patients were compared with the control (n=60) group as the serological analysis. Besides, HbA1 gene (encoding hBA1c protein) overexpression and promotor methylation responsible for BLCA, BRCA, CHOL, COAD, LUAD, LUSC, PAAD, and PRAD cancers in the male T2D patients were profiled as the oncoinformatic parameters based on the sample types; caner stages; racial footprints; gender; age; nodal metastasis; p53 methylations; pancreatitis; diabetes status; smoking behaviors; and overall/disease-free survivability. Finally, the ‘HbA1 gene strings’ responsible for genetic coexpression; endophytic vesicle regulation; antioxidant regulation; oxygen species metabolic regulation; and gene-mediated response to the reactive oxygen molecules were studied comprehensively. A strong correlation between BMI and FBS was observed in both the patients and the control (P<0.0001). Similarly, the values of FBS, THABF, and creatinine resulted in equal significance (P<0.0001) as compared to the HbA1c concentrations of all the T2D and control individuals. The SC, STGs, HDLC, and LDLC concentrations regulated ardently in both the control (P<0.0001), and patients group (P<0.0001), while HbA1c ranged from 3.8-5.8%, and 5.11-15.8% respectively. HbA1 gene is found downregulating with cancer progressed in most of the oncoinformatic parameters. According to the DA, CS, EI, CE, PC, NC, GF, H, and AT profiles; the HbA1 gene interacts with 8 other genes responsible for creating a protein cluster comprising- AHSP, HBA1, HBA2, HBB, HBD, HBE1, HBG2, RPS12, and RPS19 proteins for cancer formation. To recapitulate, HbA1c protein and HbA1 gene can be used as the prognostic serological and molecular biomarkers respectively for determining the risks of cancers among male chronic T2D patients.

The dynamics of suspended sediment involves inherent non-linearity and complexity as a result of the presence of both spatial variability of the basin characteristics and temporal climatic patterns. As a result of this complexity, the conventional sediment rating curve (SRC) and other empirical methods produce inaccurate predictions. Deep neural networks (DNNs) have emerged as one of the advanced modeling techniques capable of addressing inherent non-linearity in hydrological processes over the last few decades. DNN algorithms are used to perform predictive analysis and investigate the interdependencies among the most pivotal water quantity and quality parameters i.e., discharge, suspended sediment concentration (SSC), and turbidity. In this study, the Long short-term memory (LSTM) algorithm of DNNs is used to model the discharge-suspended sediment relationship for the Stony Clove Creek. The simulations were run using primary data on discharge, SSC and turbidity. For the development of the DNN models and examining the effects of input vectors, combinations of different input vectors (namely discharge, and SSC) for the current and previous days are considered. Furthermore, a suitable modelling approach with an appropriate model input structure is suggested based on model performance indices for the training and testing phases. The performance of developed models is assessed using statistical indices such as root mean square error (RMSE), mean absolute error (MAE), and coefficient of determination (R2). Statistically, the performance of DNN-based models in simulating the daily SSC performed well with observed sediment concentration series data. The study demonstrates the suitability of the DNN approach for simulation and estimation of daily SSC, opening up new research avenues for applying hybrid soft computing models in hydrology.

The literature study delves into novel therapeutic strategies in transplantation medicine, highlighting unique approaches that could revolutionize current practices. It emphasizes novel patterns that have the potential to transform the current landscape. Commencing with a thorough examination of the historical environment, it traces crucial advances and changes in transplantation. The focus is on traditional techniques, emphasizing their limitations and challenges. An extensive examination of contemporary transplantation therapies offers valuable insights into the most recent progress in organ, cellular, and tissue transplantation. This analysis examines the immunological obstacles and outlines the current advancements and constraints. The exploration further navigates into novel models and concepts such as immunomodulation, developments in organ preservation techniques, gene editing, biomaterials, scaffold-based solutions, and the integration of precision medicine, artificial intelligence, and machine learning applications. Each section analyzes the potential for change and current progress in various areas, backed by relevant scientific sources up to 2023. The subsequent sections delve into innovative cellular therapies, biotechnological progress, current clinical trials, and case studies demonstrating effective applications. This examination delves into the ethical and regulatory considerations of innovative therapeutic procedures, emphasizing ethical implications, regulatory frameworks, and the importance of balancing innovation with patient welfare. The literature review concludes by offering a forward-looking perspective, emphasizing potential progress, anticipated challenges, and advocating for collaboration and interdisciplinary approaches to overcome limitations in the field of transplantation medicine.

COVID-19 infection is extremely dangerous for persons with comorbidities such as kidney disease and diabetes. Although many people of all ages and socioeconomic backgrounds have suffered due to this pandemic, those with underlying medical conditions like kidney disease and diabetes are more vulnerable to becoming infected with COVID-19 related to weak immunity. However, the role of vaccination in the co-infection of COVID-19 with diabetics is not available in the literature. Therefore, we examine the unique challenges presented by the co-infection of COVID-19 in individuals with diabetes, focusing on its disease transmission dynamics. A mathematical modelling technique is to be employed in this work to analyse the dynamics of COVID-19 outbreaks with seven compartments, including vaccination with comorbidities such as diabetes. We also investigated analytically by displaying the solutions' existence, boundedness, positivity and sensitivity. After calculating the basic reproduction numbers, the stability analysis of model equilibrium points is also covered. If the reproduction numbers are less than unity, the disease-free equilibrium points of the model appear to be both locally and globally stable. The findings of this study are that as the vaccination rate rises, the incidence of COVID-19 and its co-infections with diabetes decreases. Effective disease treatment strategies may be based partly on the possible impact of vaccination on the co-infection of COVID-19 related to diabetic disease insights.

The study of angiosperm flora, endemic plants in the literature, and investigations of ‘POWO Build a checklist’ were used to compile an updated list of Bangladesh's endemic plants. According to the study, at least 49 (1.24%) of Bangladesh's 3,956 plant species are endemic to the country including 5 varieties, belonging to 41 genera in 26 families. Magnoliopsida account for thirty of them, Liliopsida for the remaining sixteen, and Pteridohpytes for the final three. The four families Zingiberaceae (9 taxa), Araceae (6 taxa), Rubiaceae (4 taxa), and Euphorbiaceae (3 taxa), include the most endemic taxa. The five most numerous endemic taxa belong to the Curcuma genus. The endemic flora, which is mostly found in the districts of Chattogram, Moulvibazar, and Rangamati, consists of 13 tree species, 4 shrubs, 5 climbers, and 27 herbaceous plant species.

Microelectromechanical System (MEMS) vibrating gyroscope design considerations are always intriguing due to their microscale mechanical, electrical, and material behavior. MEMS vibrating ring gyroscopes have become important inertial sensors in inertial measurement units (IMU) for navigation and sensing applications. The design of a MEMS vibrating ring gyroscope incorporates an oscillating ring structure as a proof mass, reflecting unique design challenges and possibilities. This paper presents a comprehensive design analysis of the MEMS vibrating ring gyroscope from the mechanical, electrical, and damping perspectives. The mechanical design of the MEMS vibrating ring gyroscope investigates the various frame designs of the vibrating ring structure, as well as the various beam structures, including curved, rectangular, and semicircular beam structures, which are analyzed using mathematical models and finite element analysis (FEA) simulations that provide an in-depth analysis of the stiffness and deflection of the vibrating structures. The electrical designs of the MEMS vibrating ring gyroscope were analyzed using various electrode configurations, electrostatic actuation, and capacitive detection mechanisms, respectively. The design analysis of various forms of damping, including viscous, structural, thermoelastic, and anchor damping, has been discussed. The variety of design structures investigated for MEMS vibrating ring gyroscopes' mechanical, electrical, and damping performance.

Among the plant nutrients potassium (K) is one of the vital elements required for plant growth and physiology. Potassium is not only a constituent of plant structure but also plays regulatory function in several biochemical processes related to protein synthesis, carbohydrate metabolism, enzyme activation. There are several physiological processes like stomatal regulation and photosynthesis are dependent on K. In the recent decades K was found to provide abiotic stress tolerance. Under salt stress, K helps in maintaining ion homeostasis and regulation of osmotic balance. Under drought stress condition K regulates the stomatal opening and makes the plants adaptive to water deficit. Many reports provided the notion that K enhances the antioxidant defense in plants and therefore, protects the plants from oxidative stress under various environmental adversities. Also, it provides some cellular signaling alone or in association with other signaling molecules and phytohormones. Although a considerable progress in understanding K-induced abiotic stress tolerance in plants has been achieved the exact molecular mechanisms of such protections are still under research. In this review, we summarized the recent literature on the biological functions of K, its uptake, and translocation and its role in plant abiotic stress tolerance.

No single evolutionary event has been identified as the cause for the final emergence of our species. I propose that a mutation on CD155 receptor gene occurred to establish a symbiosis with poliovirus, which exerted its beneficial impact via RNA dependent non-genetic transgenerational inheritance, which caused a qualitative enhancement of cognitive functions. I posit that this mutation occurred in what we call, Anatomically Modern Humans, our immediate ancestor species and that the disruption of this symbiosis causes autism spectrum disorder. Positive selection of CD155 to the extent of becoming a species defining characteristic, the chronology of autism spectrum disorder prevalence increase and continued increase, the multigenerational nature of RNA inheritance, the universal infection of humans by poliovirus and a very low associated mortality rate, and several other factors support this hypothesis. Specific genetic, epidemiological and sperm miRNA content studies are suggested to test this hypothesis.

Background: The practice of self-medication is common worldwide and is an important component of medical self-care. However, the practice can be dangerous and is linked to various risks for the patients and the entire community. This study aimed to estimate the prevalence and factors associated with self-medication among Bangladeshi adults. Methods: A cross-sectional survey was conducted between April and June 2021 among Bangladeshi adults (aged &gt;19 years) using convenient sampling. A total of 1320 data were collected through face-to-face interviews using a standardized questionnaire. Multivariable logistic regression analysis was used to identify factors associated with self-medication practice (SMP). Results: Overall, 41% of adults in our survey reported SMP. The most common illnesses that prompted SMP were common cold/flu (66.4%), gastric problems (65%), and headache (64.4%). The most frequent reasons for SMP were to get better services (30.59%), perceive SMP without side effects (23.28%), and save time with effectiveness (14.56%). Potential risk factors included 10 years (AOR = 1.91; 95% CI: 1.04 - 3.50) and &gt;12 years of schooling (AOR = 5.03; 95% CI: 2.27 - 11.15), being a businessman (AOR = 4.64; 95% CI: 1.74 - 12.37), having ≤6 family members (AOR = 2.13; 95% CI: 1.40 - 3.24), being a member of a social group (AOR = 1.53; 95% CI: 1.10 - 2.12), a health status check after every six months (AOR = 1.52; 95% CI: 1.08 - 2.13), and current ill-health (AOR = 1.41; 95% CI: 1.06 - 1.87). Protective factors identified included ≤30 years of age (AOR = 0.40; 95% CI: 0.17 - 0.93), and practice of modern (AOR = 0.39; 95% CI: 0.22- 0.69) and herbal (AOR = 0.45; 95% CI: 0.21- 0.97) healing types. Conclusion: More than one-third of the study participants reported practicing self-medication. Increasing the community’s awareness of the extreme consequences of SMP and not just the average experience might sway individuals away from SMP, and implementing strict jurisdiction could be a way to minimize the SMP.

Demand for environmentally friendly types of energy is growing all over the world, which naturally increases the intensity of work on the production of hydrogen-containing fuel mixtures. Steam reforming of methanol is one of the most effective areas of research, as it is a process with low energy consumption. The results of steam reforming of methanol on the catalysts prepared by solution combustion synthesis (SCS) and impregnation by moisture capacity are presented. Investigation of the activity of Cu-Ce-Al catalysts of different composition was carried out for production of hydrogen and comparison of SCS with traditional impregnation method. Methanol conversion reaches 99%, while the selectivity of H2 was 88%, at 500 °C. It was found that CuAl2O4 spinel formation is due to substitution of Al3+ with Cu2+ Ce3+ cations. A consequence CuAl2O4 and CeAlO3 lattice parameters increase because of difference in ionic radius of Al3+ (0.53 Å) and Cu2+ (0.73 Å), Ce3+ (1.07 Å). Advantages of SCS catalysts in steam reforming of methanol were shown. The aim of this research is to develop a new catalyst for conversion of methanol into hydrogen containing fuel mixtures, which will further promote the organization of a new era of environmentally friendly energy-saving production methods.

Polyphenols, long-used components of medicinal plants, have drawn great interest in recent years as potential therapeutic agents because of their safety, efficacy, and wide range of biological effects. Approximately 74% of the world's population still uses plant-based medicines, indicating the ongoing significance of phytochemicals for human health. The study emphasizes the growing body of research examining the role of polyphenols in uncovering their anti-adipogenic and anti-obesity properties. Functions of polyphenols including phenylpropanoids, flavonoids, terpenoids, alkaloids, glycosides, and phenolic acids are distinct due to changes in chemical diversity, and structural characteristics. This review methodically investigates the mechanism of how naturally occurring polyphenols mediate obesity and metabolic function. To this end, hormonal control of hunger has the potential to inhibit pro-obesity enzymes such as pancreatic lipase, the promotion of energy expenditure, and the modulation of adipocytokine production. Specifically, polyphenols affect insulin, a hormone that is essential for regulating blood sugar, and they also play a role in part in a complex web of factors that affect the progression of obesity. This review also explores the immunomodulatory properties of polyphenols, providing insight into their ability to improve immune function. The effects of polyphenols on gut health, improving the number of commensal bacteria, cytokine production suppression, and immune cell mediation, including natural killer cells and macrophages. Taken together, continuous studies are required for prudent and precise mechanisms underlying polyphenols' therapeutic potential in obesity and immunomodulation. In the interim, this review emphasizes the holistic approach to health and promotes the consumption of a wide range of foods and drinks high in polyphenols. This review lays the groundwork for future developments, indicating that the components of polyphenols and their derivatives may provide the answer to urgent worldwide health issues. This compilation of the body of knowledge paves the way for future discoveries in the global treatment of pressing health concerns in obesity and metabolic diseases.

In this study, the olive pomace was considered because of its importance in the environment. So, this study carried out to estimate the total nitrogen content and the fatty acids profile of olive pomace. The olive pomace samples were collected from Irbid, Jarash, Ajloun and Mafraq during the harvesting season 2014 to study the biochemical characteristics of fatty acid composition and the total nitrogen (TN) content. The total nitrogen content was determined by standard Kjeldahl method and the fatty acid profile was detected by gas chromatography (GC). The results show that the total nitrogen content ranged from (0.39 ± 0.0) to (0.62 ± 0.02) with statistically significant difference suggesting that the composition of matrices and their percentage may be responsible for composition of amendments. The calculated total protein percentage ranged between (2.43 ± 0.00) to (3.87 ± 0.17). Also, 13 different fatty acids were quantitatively profiled and quantitated. Oleic acid (C 18:1) was found to be the highest percentage of all other fatty acids and ranged between (59.03%) and (63.81%), moreover the C 18:1/C 18:2 (oil quality) was calculated and C.V% showed variation meaning that nutritional implication could affect the oxidative stability of oils. In conclusion, OP by-product could give a sustainable and alternative-cheap source for fertilizers, pharmaceutical industries, cosmetics and other industries.

The variability of ozone over Egypt has been studied in this work. Higher values of coefficient of variation (COV) at eight stations occur at winter while lowest values occur at summer. The COV is function of latitude in annual, winter and spring where it decreases gradually from the north to south of Egypt. The trend analysis of ozone over the eight stations indicates negative trends over northern stations for both annual and seasonal time series with the greatest one at winter. The horizontal distribution of ozone trend values is negative over all Egypt in winter while it positive over middle and south Egypt in the other seasons. The long-term variability of the behavior of the annual ozone shows positive trend values in ozone are the dominant features during the period 1979- 1989 at the most stations. Negative trend values in ozone are the dominant features during the period 1990- 2014 at all stations. The Mann–Kendall test confirms that there is an abrupt change towards decreasing of ozone occurs in 1981, 1984, 2012, 1999, 2000, 1998 and 2010, while a change towards increasing of ozone appears in 2006, 2014, 1993 and 1989.

One of the major concerns in structural health management (SHM) is the early detection of a growing crack. Using this, future damage due to crack propagation can be mitigated or eliminated by implementing proper repair and maintenance. Acoustic Emission (AE) is a non-destructive testing (NDT) method with potential applications for locating and monitoring fatigue cracks. The research presented in this paper focuses on SHM using AE. A novel AE signal analysis approach was proposed in order to detect crack initiation and assess small crack lengths. Experimental investigation indicated that initiation of a crack could be identified through the statistical analysis of the resulting features of the AE signals. A probabilistic AE-based model for small fatigue crack sizing was developed and the uncertainties of the model were estimated. In addition, a probabilistic model validation approach was implemented to confirm accurate estimation of the results. The outcome of this research can be used to evaluate the integrity of structures under fatigue loading. The proposed approach can also be applied as an approach to manage health and assess prognosis of structures.

Cryopreservation has been used extensively for cattle in Bangladesh, albeit no study was conducted on the cryopreservation techniques of buffalo. This study compares two freezing methods and the effects of diluters on the semen quality of buffalo. In the first freezing protocol, semen was frozen in two-step: from 37 °C to 5 °C for 30 minutes in a BLRI-developed equilibration chamber and from 5 oC to -120 oC in a Styrofoam box using liquid nitrogen vapor from different distances (0.5, 1.5, 1.6, 2 and 3 inches). At the same time semen was frozen in a programmable freezer in three steps. The semen samples were then evaluated for motility and morphological quality by CASA. In another experiment, the efficacy of one locally developed diluter-Tris-fructose-egg yolk-based (TFE) and three commercial diluters (Andromed, Triladyl and Steridyl) were evaluated. The highest number of motile sperms (62.67±1.12; P< 0.01) and progressive motility (38.97±1.10; P < 0.001) was observed at 1.6 inches above liquid nitrogen. There was no significant difference in overall motility, progressive and slow motility between semen cryopreserved in the cheap nitrogen vapor technique (57.49±5.67, 38.70± 4.04 and 3.83± 0.63, respectively) and expensive automated technique (65.94±4.65, 45.54 ± 3.64 and 2.43± 0.36, respectively). The highest recovery rate and conception rate were observed in semen diluted with TFE (82.4% and 80%, respectively). Hence, the cryopreservation technique using nitrogen vapor and TFE diluent is cost-effective and suitable for freezing buffalo semen that would produce superior semen for artificial insemination.

The multidrug resistance transporter NorM is an important drug resistance pump and plays a critical role in multidrug resistance in bacteria and mammals. In this study we carried out molecular dynamics simulation to study the mechanism of Na+ binding and dynamical structures of two long loops in the substrate-releasing process in substrate binding NorM. Our simulation study identified several key residues (D41, E261 D377) along the Na+ binding pathway and a multi-state ion-binding mechanism is proposed based on the simulation study. In this proposed model, the transport of Na+ is a multi-stage process with D41 being the first station for binding to Na+, followed by Na+ binding to the second station E262 and finally to the cation-binding site of E262 and D377. During the transport of Na+, the transmembrane components TM1, TM7 and TM2 are rearranged to facilitate the ion transport as well conformational changes of NorM to a closed state. Further, substrate-bound simulation revealed that Loop3-4 and Loop9-10 control the substrate-releasing process.

The prevalence of internet gaming disorders (IGD) is considerably high among youth, especially with social isolation imposed by the ongoing COVID-19 pandemic. IGD adversely affects mental health, quality of life, and academic performance. The Internet Gaming Disorder Scale (IGDS9-SF) is designed to detect IGD according to DSM-IV diagnostic criteria. However, inconsistent results are reported on its capacity to diagnose IGD evenly across different cultures. To ensure the suitability of the IGDS9-SF as a global measure of IGD, this study examined the psychometric properties of the IGDS9-SF in a sample of Sri Lankan university students (N = 322, mean age =17.2 ± 0.6, range = 16-18 years, 56.5% males) and evaluated its measurement invariance across samples from Sri Lanka, Turkey, Australia, and the USA. Among Sri Lankan students, a unidimensional structure expressed good fit, invariance across different groups (e.g., gender, ethnicity, and income), adequate criterion validity (strong correlation with motives of internet gaming, daily gaming duration, and sleep quality), and good reliability (alpha = 0.81). Males and online multiplayers expressed higher IGD levels, greater time spent gaming, and more endorsement of gaming motives (e.g., Social and Coping) than females and offline players. Across countries, the IGDS9-SF was invariant at the configural, metric, and scalar levels, albeit strict invariance was not maintained. The lowest and highest IGD levels were reported among Turkish and American respondents, respectively. In conclusion, the IGDS9-SF can be reliably used to measure IGD among Sri Lankan youth. Because the scale holds scalar invariance across countries, its scores can be used to compare IGD levels in the studied countries.

The wetlands in northeastern Bangladesh are home to some of the most prolific and valuable ecosystems on the planet, offering a wide range of benefits to both the local and wider communities. A limited number of research on this topic have been carried out in various wetlands in coastal hilsa, but none have been located in the northeastern region of Bangladesh. Thus, the goal of this study was to better understand the most commercially relevant species (anadromous hilsa) in northeastern Bangladesh as well as to assess the wetland ecosystem services more thoroughly with the contribution of their fish genetic resources. In addition to laboratory studies, fieldwork was done in the fishing settlements along the Surma River, Hakaluki Haor, and Tanguar Haor. The study classified 77 fish species into 21 subcategories of ecosystem services, of which 56% were not threatened, 17% were vulnerable, and 10% were highly endangered. The species Hilsa was found to be the most economically significant, accounting for 1% of the GDP overall. The study determined if the hilsa stock of the examined wetlands maintains a single or several subpopulations in comparison to other parts of the country when they migrate from saline water to northeastern Bangladesh (freshwater). But when compared to other groups, the FST score was between 0.000 to 0.017, indicating that the populations are identical and that there is genetic material sharing between them. Additionally, these statistics imply that the Sylhet haor and adjacent river systems contain a single stock of Hilsa fish. Nevertheless, a number of stresses and risks, including overexploitation, illicit and destructive fishing, siltation, and natural disasters like flash floods, have been linked to changes in the supply of hilsa and other ecosystem services. This study also emphasizes the necessity of policy attention and research to address the concerns.

Although vaccinating the world is adopted by the WHO to limit COVID-19 transmission, people’s worries about vaccines may suppress their desire for vaccination despite vaccine availability. This study aimed to evaluate the levels of stress and anxiety among 250 Jordanians who received their first vaccine dose at a local community health center. The respondents completed the stress and anxiety subscales of the Depression Anxiety and Stress scale 21 (DASS-21) pre- and post-vaccination. The respondents expressed more moderate-severe levels of stress pre than post vaccination (20.8% and 13.2%, respectively). Meanwhile, 37.2% and 45.2% of the respondents expressed moderate-severe anxiety pre and post vaccination, respectively. Wilcoxon signed-rank test revealed that the drop in the level of stress from pre (median (IQR) = 5 (1-8)) to post vaccination (median (IQR) = 3 (1-7)) was statistically significant (z = -3.81, p = 0.001, r = 0.17) while the increase in anxiety was not. Anxiety median significantly dropped among individuals experiencing mild to severe anxiety pre vaccination. Similarly, stress and anxiety significantly increased among individuals expressing normal anxiety pre vaccination (z = -3.57 and -8.24, p values = 0.001, r = 0.16 and 0.37, respectively). Age positively correlated with post vaccination anxiety among respondents with mild pre vaccination anxiety, and it negatively correlated with pre vaccination level of stress in the normal anxiety group. Gender, marital status, respondents’ level of education, and history of COVID-19 infection had no significant correlation with anxiety or stress at either point of measurement. Overcoming their hesitancy to receive COVID-19 vaccine, individuals with normal levels of anxiety experienced a rise in their distress symptoms following immunization. On the contrary, vaccination seemed to desensitize anxious individuals. Policymakers need to formulate a population-specific plan to increase vaccine preparedness and promote psychological well-being over all during the pandemic.

Background: Intrauterine transfusion (IUT) of the donor and partial exchange (pET) of the recipient is a temporizing treatment for pregnancies with Twin Anemia Polycythemia Sequence (TAPS). We sought to give a detailed description of the procedural approach and outcomes for sequential donor IUT and recipient pET in TAPS. Methods: Retrospective study of spontaneous TAPS referred to the Johns Hopkins Center for Fetal Therapy treated with donor IUT followed by recipient pET utilizing a double-syringe set up. Procedure characteristics and outcomes as well as accuracy of existing transfusion formulas were analyzed and compared with the literature. Results: 5 of 78 patients with spontaneous TAPS underwent a total of 19 combined IUT/pET procedures (median first procedure to delivery interval 5.6 weeks [interquartile range IQR 1.9-6.0]). One pET was stopped for fetal decelerations. Patients delivered at 33.0 weeks [IQR 31.9-33.3] with two survivors and no neonatal transfusion requirements. IUT volumes were 48 ml [IQR 39-63 ml] and pET volumes 32 ml [IQR 20-50] utilizing aliquots of 5 – 20 mls for the latter (p=0.021). For IUTs, assumption of a fetal blood volume below 150 ml/kg underestimated required transfusion volume. For pETs, all formulas required adjustment of dilution volume based on bedside testing (p&lt;0.05 for all). Conclusions: Donor transfusion followed by partial exchange in the recipient can prolong pregnancy in spontaneous TAPS and obviate the need for neonatal transfusion. A double-syringe setup facilitates efficient saline exchange. Because the accuracy of volume formulas is limited, bedside testing is recommended to achieve the target hemoglobin.

The once near-extinct Russell’s viper has recently come back to the area beyond its historical range. A couple of decades ago, its distribution was confined to 11 districts of Bangladesh. Hence, the study aims to update the distributional map of Russell’s Viper (Daboia russelii) across the country and find out the surges' causal factors. Both primary and secondary data were utilized in this study. It revealed that the distributional range of this snake was expanded from 22 to 33 districts in 2024. The respondents noted that climatic stressors like high humidity accompanied by hot weather, increased salinity, and increased frequency of flooding facilitated the spreading of the viper across the country. The cropping pattern and crop diversification were another major contributing factor. The shifting of the single-cropped area to a multi-cropped area in the Barind tract increased its main prey rats. Contrarily, the killing of natural predators such as foxes, monitor lizards and mongoose led to the rise in the snake population. The destruction of vegetation coverage in the upper part of the Padma Basin facilitated the movement of Russell's vipers downstream.

This research introduces a pioneering solution to the challenges posed by gastrointestinal tract (GI) cancer in radiation therapy, focusing on the imperative task of precise organ segmentation for minimizing radiation-induced damage. GI imaging has historically used manual demarcation, which is laborious and uncomfortable for patients. We address this by introducing the ResECA-U-Net deep learning model, a novel combination of the UNet and ResNet34 architectures. Furthermore, we further augment its functionality by incorporating the Efficient Channel Attention (ECA-Net) methodology. By utilizing data from the UW-Madison Carbone Cancer Centre, we carefully investigate several image processing techniques designed to capture critical local characteristics. With its foundation in computer vision concepts, the ResECA-U-Net model is excellent at extracting fine details from GI images. Sophisticated metrics such as intersection over union (IoU) and the dice coefficient are used to evaluate performance. Our study's outcomes demonstrate the effectiveness of the suggested method, yielding an impressive 96.27% Dice coefficient and 91.48% IoU. These results highlight the significant contribution that our strategy has made to the advancement of cancer therapy. Beyond its scientific merits, this work has the potential to significantly enhance cancer patients' quality of life and provide better long-term outcomes. Our work is a significant step towards automating and optimizing the segmentation process, which can potentially change how GI cancer is treated completely.

Zinc-oxide (ZnO) nanostructures including nanorods are currently considered as a pioneer research of interest world-wide due to their excellent application potentials in various applied fields especially for the improvement of energy harvesting photovoltaic solar cells (PSC). We report on the growth and morphological properties of zinc-oxide (ZnO) nanorods grown on the surface of plain zinc (non-etched and chemically etched) plates by using a simple, economical, and environment-friendly technique. We apply hot water treatment (HWT) technique to grow the ZnO nanorods and varies the process parameters, such as temperature and the process time duration. The morphological, and elemental analysis confirm the agglomeration of multiple ZnO nanorods with its proper stoichiometry. The obtained nanostructures for different temperatures with different time duration showed the variation in uniformity, density, thickness and nanonorods size. The ZnO nanorods produced on the etched zinc surface were found thicker and uniform as compared to those grown on the non-etched zinc surface. This chemically etched Zinc plates preparation can be an easy solution to grow ZnO nanorods with high density and uniformity suitable for PSC applications such as to enhance the energy conversion efficiency of the photovoltaic (PV) solar cells towards the future sustainable green earth.

The work reports a facile synthesis of high thermally-stable nanocrystalline anatase TiO2 nanoparticles (NPs) doped with different atomic concentrations (0.5, 1.0, 3.0, and 6.0%) of Gd3+ and Nd3+ ions by a template-free and one-step solvothermal process, using titanium(IV) butoxide as titanium precursor and dimethyl sulfoxide (DMSO) as solvent. The structure and morphology of the Gd3+, Nd3+, and 0.5%Gd3+-0.5%Nd3+/doped TiO2 NPs have been characterized by using various analytical techniques. The Gd3+/ and Nd3+/TiO2 molar ratios were found to have a pronounced impact on the crystalline structure, size, and morphology of TiO2 NPs. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) studies revealed the proper substitution of Ti4+ by Gd3+ and Nd3+ ions in the TiO2 host lattice. The as-prepared Gdx/TiO2, Ndx/TiO2, and Gd1.0/Ndx/TiO2 bimetallic NPs, x = 0.5, 1.0, 3.0, and 6%, have been investigated as electrocatalysts for hydrogen evolution reaction (HER) in 1.0 M KOH solution using a variety of electrochemical techniques. At any doping percentage, the Gd1.0/Ndx/TiO2 bimetallic NPs showed higher HER catalytic performance than their corresponding counterparts i.e. Gdx/TiO2 and Ndx/TiO2. Upon increasing the Nd content from 0.5 to 6.0%, the HER catalytic performance of the Gd1.0/Ndx/TiO2 bimetallic NPs was generally enhanced. Among the studied materials, the bimetallic Gd1.0/Nd6.0/TiO2 NPs emerged as the most promising catalyst with an onset potential of -22 mV vs. RHE, a Tafel slope of 109 mV dec-1, and an exchange current density of 0.72 mA cm-2. Such HER electrochemical kinetic parameters are close to those recorded by the commercial Pt/C (onset potential: -15 mV, Tafel slope: 106 mV dec-1, and exchange current density: 0.80 mA cm-2), and also comparable with those measured by the most active electrocatalysts reported in the literature. The synergistic interaction of Gd and Nd is thought to be the major cause of the bimetallic catalyst's activity.

Background: Asthma is a widespread chronic respiratory disease that poses a significant public health challenge. The current study investigated the associations between air pollution and asthma severity among individuals residing near the Sohar industrial port (SIP) in Oman. Despite the presence of multiple major industrial complexes in Oman, limited knowledge regarding their impact on respiratory health is accredited. Hence, the primary objective of this study is to offer valuable insights into the respiratory health consequences of industrial air pollution in Al Batinah North. Methods: The state health clinics' records for patient visits related to asthma were collected for the timeframe spanning 2014 to 2022. Exposure was defined as the distance from SIP, Majan Industerial Area (MIA) and Sohar Industerial Zone (SIZ) to determine high, intermediate, and low exposure zones (12 km, respectively). Exposure effect modifications by age, gender, and smoking status were also examined. Results: The conducted cross-sectional study of 410 patients (46.1% males and 53.9% females) living in over 17 areas around SIP revealed that 73.2% of asthmatics were under 50 years old, with severity significantly associated with closeness to the port. Risk ratios were estimated to be (RR:2.42; CI95%: 1.01–5.78), (RR:1.91; CI95%: 1.01–3.6), and (RR:1.68; CI95%: 0.92–3.09) for SIP, MIP and SIZ areas, respectively, compared to the control area. Falaj Al Qabail (6.4 km) and Majees (6 km) had the highest number of asthma patients (N. 69 and N. 72), and highest percentages of severe asthma cases among these patients (28% and 24%) with significant risk ratios (RR:2.97; CI95%: 1.19–7.45 and RR:2.55; CI95%: 1.00–6.48), correspondingly. Moreover, severe asthma prevalence peaked in the 25-50 age group (RR:2.05; CI95%: 1.26–3.33), and this linkage between asthma and age was much more pronounced in males than females. Smoking and exposure to certain contaminant (dust and smoke) increased also the risk of severe asthma symptoms, but their effects were less important in the high risk zone, suggesting much more important risk factor. A neural network model accurately predicted asthma risk (94.8% accuracy), with proximity to Sohar Industrial Port as the most influential predictor. Conclusion: The study highlights the High asthma burden near Sohar Industrial Port, linked to port proximity and smoking and wind direction as major risk factors. These findings inform vital public health policies to reduce air pollution and improve respiratory health in the region, prompting national policy review.

In modern automobiles, Infotainment High-Performance Computing (HPC) systems play a vital role in enhancing the capabilities of drivers and passengers by providing advanced features consisting of music, navigation, communication, entertainment, etc. However, as the use of information technology in vehicles increases, it results in cybersecurity threats such as data breaches and the loss of sensitive information. To improve the security of the infotainment system in automotive vehicles, the research conducted threat modeling at the component level using Microsoft’s STRIDE tool and performed risk assessment by using SAHARA (Safety-Aware Hazard Analysis and Risk Assessment) and DREAD methodologies to evaluate associated risks. It provides a systematic representation of threats, associated risks, and generic mitigation strategies to counter cybersecurity attacks. Through the threat modeling process, 34 potential security threats were identified. The study also provided a comparative analysis to calculate the risk values of the threats to prioritize for treatment. These identified threats and associated risks need to be considered to avoid potential cyberattacks, before deploying the infotainment HPC system in real-world automotive vehicles.

Background: One of the most common occupational health hazard and serious health concern, now a days, recognized is Musculoskeletal disorders (MSDs). The high prevalence among students and teachers is a major cause of decline in their health related quality of life and work performance. This study aimed to identify the prevalence of musculoskeletal disorders among teachers and students during online education. Methods: A cross-sectional survey was conducted among university faculty members and students who were involved in online education during COVID-19. Data collection was carried out electronically through a validated Arabic version of the Nordic Musculoskeletal Questionnaire (NMQ) which is self reported. A total of 175 respondents responded to the questionnaire (response 60%). Results: The prevalence of any part of the body was 90.3%. The commonest site of MSDs for past 12 months was the low back (65.7%), the neck (58.3%), and shoulders (57.7%). Females (80%) suffered more than males (20%). The students reported slightly higher MSDs as compared to teachers (93.1% vs 90.3). Binominal regression analysis showed association of females with low back pain “OR: 2.24 (95% CI): 1.04-4.83; p = 0.03” and neck pain “OR: 2.7 (95% CI): 1.24–5.84; p = 0.012)” while bad posture was associated with pain in upper back “OR: 3.46 (95% CI): 1.73-6.93; p = 0.001”. Conclusion: The faculty members and students are prone to high MSDs during online classes and significant measures should be taken to reduce the prevalence by addressing associated risk factors.

Microplastics, which are plastic particles smaller than 5 mm in size, are a growing environmental concern since they have been found in oceans, rivers, lakes, and even on land. These tiny particles can escape water filtration systems and end up in water bodies as well as through the degradation of the larger plastic products causing serious environmental and food safety concerns. This research represents the magnitude of this pollution, characterization of microplastic contamination, its type of polymer, and possible sources of this pollution in the rivers around Dhaka, Bangladesh. Quantitative analyses were done following the method suggested by the NOAA and other conventional methods. Among the rivers, Buriganga has the highest microplastic pollution with 3.654 items/L in surface water and 43.125 items/kg in sediment. The concentration in Shitalakshya and Turag rivers are 3.011 items/L and 2.051 items/L in surface water and 34.875 and 17.875 items/kg in sediment respectively. ANOVA test revealed a significant difference between the concentration level of microplastic in the surface water of the Burigana and Turag rivers. A positive correlation between the concentration level of microplastic in the surface water and the sediment was also found. On average 58% of the microplastics were found to be fibrous in surface water. Qualitative analyses were done to find the characteristics and chemical composition of the microplastics. Through the use of FTIR spectroscopy, the study identified different kinds of synthetic polymers in the sample including polyamide (Nylon), polyethylene (PE), polystyrene (PS), polypropylene (PP), polyethersulfone (PES), polyvinyl chloride (PVC), and polyethylene terephthalate (PET) and polyethylene were the most abundant polymer in the samples. This study involved the investigation of three distinct rivers located in the vicinity of Dhaka city

Purpose: Prostate cancer remains the 2nd leading cancer killer of men, yet it is also a disease with a high rate of overtreatment. Diffusion weighted imaging (DWI) has shown promise as a reliable, grade-sensitive imaging method, but it is limited by low image quality. Currently, DWI image quality is directly related to low gradient ampli-tudes, since weak gradients must be compensated with long echo times. Methods: We propose a new type of MRl accessory, an "inside-out" and nonlinear gradient, whose sole purpose is to deliver diffusion encoding to a region of interest. Performance was simulated in OPERA and the resulting fields were used to simulate DWI with two compartment and kurtosis models. Experiments with a nonlinear head gradient prove the accuracy of DWI and ADC maps diffusion encoded with nonlinear gradients. Results: Simulations validated thermal and mechanical safety while showing a 5 to 10-fold increase in gradient strength over prostate. With these strengths, lesion CNR in ADC maps approximately doubled for a range of anatomical positions. Proof-of-principle experiments show that spatially varying b-values can be corrected for accurate DWI and ADC. Conclusions: Dedicated nonlinear diffusion encoding hardware could improve prostate DWI.

The key question for the understanding of corrosion phenomena of Si3N4-SiC material in Al reduction cell – whether corrosion by gases (and oxidation in particular) opens way for the corrosion by molten cryolite, or corrosion of Si3N4-SiC by cryolite plays its own role in degradation of the material in service. More probably the reactions of silicon carbide and silicon nitride with molten cryolite go after the stage of pre oxidation to silicon dioxide. The corrosion of Si3N4-SiC material in the reduction cell may take place by “gas-solid” reaction and by “liquid-solid” reaction. There are several variants of lab corrosion test for the evaluation of corrosion resistance of Si3N4-SiC material to cryolite. The results of investigation of Si3N4-SiC lab corrosion test give no direct evidence of selective dissolution of specific phase (Si3N4 or SiC, α-Si3N4 or β-Si3N4) in cryolite. The existing variants of lab corrosion testing require clarification.