The objective of the study was to apply the principles of analytical quality by design (AQbD) to the analytical method for the determination of the radiochemical purity (PQR) of the radiopharmaceutical sodium iodide 131I oral solution, by means of thin layer chromatography (TLC) with a Radio-TLC scanner, the same one that allows to evaluate the quality of the product. For the AQbD, the analytical objective profile (ATP), critical quality attributes (CQA), risk management, the method operable design region (MODR) were defined through the response surface methodology for method optimization using the MINITAB ® software, Control Strategy and the validation of the method where the parameters of selectivity, linearity, precision, robustness, detection limit, quantification limit, range and stability of the sample solution were evaluated. Under the experimental conditions, the conditions of the method were demonstrated by TLC-Scanner and optimization was carried out for an injection volume of 3 µL, radioactive concentration of 10 mCi/mL and carrier volume of 40 µL. It was statistically demonstrated that the method is selective for the 131I iodide band Rf of 0,8 and for the radiochemical impurity IO₃⁻ Rf of 0.6, linearity from 6,0 to 22.0 mCi/mL, intermediate precision with Global RSD of 0,624%, robustness with global RSD 0,101%, detection limit of 0,09 mCi/mL, quantification limit of 0.53 Ci/mL, conforming range, and stability of the sample solution evaluated over time 0, 2 and 20 hours with a global RSD of 0,362%, obtaining consistent results. The development of the method based on AQbD allowed the generation of a design space and an operational space with knowledge of all the characteristics and limitations of the method, likewise in all the operations the conformity of the tests to the acceptance criteria was verified. The validity of our method is concluded under the established conditions, suitable for use in the manufacturing process of sodium iodide 131I and application in nuclear medicine services.

: Belize is located within the Mesoamerican biodiversity hotspot and is an important link between critical biodiverse habitats in Central America. Despite considerable research on biodiversity in marine environments of Belize, research in freshwater environments is limited, with the most recent checklists having been published in obscure, mostly unavailable references more than 20 years ago.Belize is currently experiencing serious degradation of some of its major freshwater resources such as the New River in the northern part of the country. These unique habitats are increasingly threatened by agro-urban development, invasive species and erratic climatic events. The economically important barrier coral reef is also experiencing impacts from the degraded freshwater watersheds that empty into the sea near the reefs. This work addresses the paucity of documentation of the freshwater fishes of Belize, particularly for the Shipstern Peninsula area. The Shipstern Peninsula is a unique region in northern Belize, adjacent to the southern border of Mexico and the northeastern end of the Corozal Bay Wildlife Sanctuary. This paper reports on fish collected in 2015, with comparisons to historical data in surveys published in 1990, 1993, and 1997. We report on 12 genera/species collected in 2015 and provide molecular barcode data on several, which was not available in previous publications. Floridichthys polyommus, a new observation for the Shipstern Lagoon, and Dajaus monticola, a revised name and new observation for the Inland Blue Hole, were confirmed by barcodes. This update is vital to the continued management of freshwater environments in Belize, and especially for the Shipstern Peninsula and its important habitats held in trust for perpetuity for the Belizean people.

The importance of diet and the gut-brain axis for brain health and cognitive function is increasingly acknowledged. Dietary interventions are tested for their potential to prevent and/or treat brain disorders. Intermittent fasting (IF), the abstinence or strong limitation of calories for 12 to 48 hours, alternated with periods of regular food intake, has shown promising results on neurobiological health in animal models. In this review article, we discuss the potential benefits of IF on cognitive function and the possible effects on the prevention and progress of brain-related disorders in animals and humans. We do so by summarizing the effects of IF which - through metabolic, cellular and circadian mechanisms - lead to anatomical and functional changes in the brain. Our review shows that there is no clear evidence of a positive short-term effect of IF on cognition in healthy subjects. Clinical studies show benefits of IF for epilepsy, Alzheimer’s disease and multiple sclerosis on disease symptoms and progress. Findings from animal studies show mechanisms by which Parkinson’s disease, ischaemic stroke, autism spectrum disorder and mood- and anxiety disorders could benefit from IF. Future research should disentangle whether positive effects of IF hold true regardless of age or the presence of obesity. Also, variations in fasting patterns, total caloric intake and intake of specific nutrients may be relevant components of IF success. Longitudinal studies and Randomized Clinical Trials (RCTs) will provide a window into the long-term effects of IF on the development and progress of brain-related diseases.

Modeling the flow of polymer solutions requires knowledge at various length and time scales. The macroscopic behavior is described by the overall velocity, pressure and stress. The polymeric contribution to the stress requires knowledge of the evolution of polymer chains. In this work, we use a microscopic model, the finitely extensible nonlinear elastic (FENE) model, to capture the polymer behavior. The benefit of microscopic models is they remain faithful to the polymer dynamics without information loss via averaging. The downside is the computational cost needed to solve the thousands to millions of differential equations describing the microstructure. We thus describe a multiscale flow solver that utilizes GPUs for massively parallel, efficient simulations. We compare and contrast the microscopic model with its macroscopic counterpart under various flow conditions. In particular, significant differences are observed under nonlinear flow conditions, where the polymers become highly stretched and oriented.

Introduction: Intraventricular Hemorrhage (IVH) is a devastating condition mostly in preterm infants at < 30 weeks GA with large morbidities and mortality usually in the first 72 hours after birth. Prevention seems to be the only way to completely deal with this problem. The IVH prevention in this age group has been studied and includes some strategies such as prenatal corticosteroids, cesarean delivery, careful extraction among others, but still, it has an unacceptably high incidence in this population. A protocol with the name Drive to Zero IVH Prevention Project that was presented in one of EpicLatino conferences some years ago. As with any quality improvement in practices, we adapted this project to our unit. Objective: To compare the IVH incidence in our unit after the protocol implementation with and historic cohort from the same unit and with all other units un the epilactino network. Material and method: In October 2017 we begun to implement a neuro protection protocol. For this analysis we include every patient born <30 weeks of GA, inborn or outborn but less than 2 days old, that survived at least three days and had a neuroimaging preformed. We include cases until July 2022, and we use the EpicLatino, a Latin-American database, from 2018 to 2020 excluding our own unit for comparison as well as an historical cohort from our unit from 2010-2017. The protocol consists of: Minimal manipulation, low volume ventilation, one routine fiscal exam a day, neutral head position, one blood pressure measured per shift, no keel stick measurements, continuous dim light and low noise level, minimal touch, no vasoactive therapy except in extreme cases, temperature and humidity at 80%, catheters, when possible, fluid restriction followed with diuresis, no PDA therapy or Echo if possible and routine therapy with hydrocortisone, erythropoietin, caffeine, parenteral nutrition, and trophic feeding. e performed a univariate analysis for IVH and groups and a logistic regression model with variables that had statistical significance in the univariate analysis. Results: The study group included 64 cases, the historic cohort 123 and the EpicLatino 1029. Demographic characteristics were similar with few statistically significant differences. We found four grade 1-2 and six grade 3-4 IVH in the study group (some caused by very traumatic delivery with multiples hematomas in head, body, and extremities), all significantly lower that the other two groups. The logistic regression model confirmed the independent statistically significant result in the study group. Conclusion: The hemorrhage during delivery must be prevented by the obstetric team. Afterwards, a set of interventions like very gentle handling with minimal manipulation and unnecessary strict lab managing seams to decrease the incidence of IVH.

Introduction: Some of the practices in medicine are carried out of habit without proven benefits. This is the case of premature babies from 30 to 34 weeks of gestation who are always given parenteral fluids, even though this practice has been associated with an increase incidence of infection. At the end of 2017, we started a protocol of rationalization in the use of parenteral fluid. To administer nutrition/fluids, we used oral fluids by suction if this was possible or otherwise by oral/nasogastric tube at volumes of 70-80 mL/Kg/day divided every 3 hours, with 5 mL increments every 12-24 hours until 200 mL/K/day was achieved, always using breast milk when possible. Material and methods: The present study sought to compare results before and after this new policy. For this work, we review all premature babies between 30-34 weeks of gestation in two time periods, the first from 01/01/2010 to 12/31/2017 and the second from 01/01/2018 to 08/15/2022. The number of cases with and without parenteral fluids (PF), the incidence of infection, the weight at admission and discharge, and the change in the weight Z score between birth and discharge were compared. Both the anthropometric and outcome variables were compared using the different statistical methods according to each variable. Results: were found 920 cases with the described characteristics. The groups before and after the intervention did not show significant differences in their general demographic characteristics. We observed a decrease use of PF in the second period, from 425 cases (82.0%) before to 297 (26.2%) after implementation, p <0.0001 and fewer days of use (4.1 days/average before vs 1.3 after, p <0.0001) of PF. The weight at discharge and the change in weight Z-score were the same in both groups. Infections went from nine cases before to two cases after but it was not statistically significant. There were no complications due to less use of PF. Discussion: This study showed that the use of PF is not associated with significant changes in outcomes of interest, which reinforces that its use does not generate any benefit for the patient. Larger number of cases is required to detect differences in low incidence events such as infections.

This paper deals with the analysis of the cognitive functions of the cerebral cortex or cortex in the evolutionary context. The triune brain model is presented given its notorious popularity in fields that are not strictly neuroscientific, and its limitations and inaccuracies are also shown. Although it is an outdated theory, this one represented the passage to a new era, because it really was the model of the movement towards understanding the brain in evolutionary terms. Next, the paper illustrates the different areas of the cortex and their functions, as well as the evolution of the brain and the cortex in vertebrates. To date, the expansion of the cortex with the amniotes was placed 300 million years ago, although recent studies place it in the lampreys more than 500 million years ago. Evolutionary changes in mammalian brain and cortex size are discussed, showing the evolution from three to six cell layers and trends in different groups of mammals. Finally, the most recent contributions in the field of research are illustrated, such as the role of neurogenesis and the evolution of the connectivity of the cortex.

Mechanical recycling of solid plastic wastes on a small-scale level can be accomplished with the correct approaches. Thermoplastics are mostly considered for mechanical recycling because of their physical properties and ease of reprocessing. This paper reviews the mechanical reprocessing techniques of selected thermoplastics (polyethylene terephthalate and polyolefins) since they constitute a significant proportion of plastics used commercially. Furthermore, necessary considerations for effective operation of small-scale plants, including energy requirements of machinery and optimisation in order to improve efficiency and product quality, are discussed. A clearer understanding and addressing of the process-related challenges will lead to successful establishment and management of small-scale mechanical recycling facilities to benefit communities. Efficient small-scale mechanical reprocessing establishments have become essential in reducing the environmental impacts of solid plastic wastes and for energy conservation.

'Cv 'Doña María' table grape is a high-quality table grape variety included in the Protected Designation of Origin (PDO) of the European Union "The bagged grape of the Vinalopó." The PDO stipulates that grape clusters must be protected with paper bags from inclement weather and insects, which helps enhance the final grape quality. However, 'Doña María' is a variety prone to high shattering in the late stages of ripening on the vine and during postharvest. Inorganic calcium treatments are one of the most commonly used tools to reduce this disorder, but the translocation of this mineral from veraison onward has been questioned. In this study, five applications were performed, from veraison to harvest, using sorbitol-chelated calcium (0.7 % + 1.0 %), Ca(NO3)2 (Ca) at 0.7% and sorbitol at 1%. It was observed that bagged grapes (not wetted with the solutions) only increased the concentration of total and bound calcium when treated with Sorbitol-Ca. This resulted in reduced berry drop during cultivation and postharvest and improved fruit firmness. Additionally, it reduced grape metabolism indicators such as respiration rate, weight loss, malic acid degradation, prevented abscisic acid (ABA) and malondialdehyde (MDA) accumulation, and favored the accumulation of secondary metabolites such as total polyphenols, increased antioxidant activity, and sugar content. The application of sorbitol-chelated calcium is an effective and safe tool that enhances fruit quality and prevents losses due to shattering during postharvest.

DC residential distribution system (RDS) consisted by DC living home will be a significant integral part in the future green transmission. Meanwhile, the increasing number of distributed resources and intelligent devices will change the power flow between main grid and demand sides. The utilization of distributed generations (DGs) requires an economic operation, stability, environmentally friendly in the whole DC system. This paper not only presents an optimization schedule and transactive energy (TE) approach through centralized energy management system (CEMS), but a control approach to implement and ensure DG output voltages to various DC buses in DC RDS. Based on data collection, prediction and a certain objection, the expert system in CEMS can work out the optimization schedule, after this, the voltage droop control for steady voltage is aligned with the command of unit power schedule. In this work, a DC RDS is as a case study to demonstrate the process, the RDS is associated with unit economic models, cost minimization objective is proposed to achieve based on real-time electrical price. The results show that the proposed framework and methods will help the targeted DC residential system to reduce the total cost and reach stability and efficiency.

This study was carried out with a low-cost electronic nose prototype based on eight metal oxide sensors (MQ) in order to characterize samples of lemons treated with 0.5% and 0.1% of sodium benzoate. The MQ sensors designed are sensitive to one or more chemicals to detect the presence of a variety of chemicals in the air. The sensor MQ135 detects ammonia, hydrogen sulphide and benzene. Signal data were studied to obtain a pattern recognition of rotten in lemon fruits. Network analysis was used to obtain a calibration of measures among the stage of lemons. In this article, an electronic nose prototype based on 8 MQ metal oxide sensors has been used in order to analyze and characterize different lemon varieties to which different chemical treatments have been applied in pre-harvest. PCA-based data analyzes were used to observe clusters in the data. Through the combined use of the data obtained by the nose and these Sequential Neural Networks (SNNs) a classification tool for lemon varieties and applied treatments has been obtained. It is shown the ability of this device to be used as a reliable discrimination method, in addition to providing low cost and optimization of time and expert resources.

Objectives: To assess the short-term impact of a single global stretching session on plantar pressures and lumbar range of motion (RoM) over one week in sedentary university students. Design: A randomised controlled trial with two parallel groups. Participants: Sixty-four university students were randomly assigned to a stretching group or control group. The stretching group received a single session of global stretching and the control group remained seated for the same length of time as the stretching session. Main outcome measures: Lumbar RoM and plantar pressures were assessed before, immediately after, 48 hours after, and 7 days after intervention. Results: Group-by-time interaction was significant for lumbar lateral flexion (p = 0.044), right maximal pressure (p = 0.003), left maximal pressure (p = 0.008), right mean pressure (p = 0.025), left mean pressure (p = 0.002), and maximal pressure minus mean pressure in right foot (p = 0.007). The model with plantar pressures showed a significant difference for group-by-time interaction (p = 0.010).Conclusion: Global stretching seems to counteract the ill-effects of prolonged sitting up to seven days with respect to plantar pressure in standing without improving lumbar ROM

The present study shows a methodology for analyzing and designing a cylindrical packed-bed reactor considering stationary and dynamic models. The design comprises the reactor's stationary and dynamic governing differential equations for mass and heat transfer under multi-dimensional approaches. The results included simulation of concentration, temperature, and reaction rate profiles via the 1-D and 2-D differential equations solution with FlexPDE software. The analysis was complemented with a scaled 3-D dynamic model implemented in COMSOL Multiphysics. Both FlexPDE and COMSOL Multiphysics relied on the finite element technique to solve the governing differential equations. The simulated concentration and temperature profiles from both FlexPDE and COMSOL models were compared to experimental data gathered from literature (specifically from a Fischer-Tropsch process to produce low-molecular-weight hydrocarbons in a configuration of cylindrical packed-bed reactors). Simulated concentration and temperature profiles from the 2-dimensional dynamic model and the COMSOL model were in good agreement with the trend observed in experimental data. Finally, the predicted reaction rate profiles from the COMSOL model and the 2-dimensional dynamic model followed the temperature trend, thus reflecting the temperature dependence of the reaction.

The aim of this work is to evaluate the impact of proposed modifications to conventional capturing and discharging effluents devices in Subsurface Flow Wetland (SSFW) systems. Main modifications proposed consist on extending the influence of the capture and discharge device in such a way that the SSFW width and height are fully covered. Additionally an SSFW prototype was built as pilot including the proposed modifications and the impact of the innovative device is measured based on the efficiency of the Chemical Oxygen Demand (COD) removal as compared to a traditionally built SSFW. The results show that for the innovative device, the COD removal was 10% higher than for the conventional device.

The objective of this work is to evaluate the impact of the innovative modifications made to the conventional effluent capture and discharge devices used in subsurface flow wetlands (SSFW). The main modifications developed consist on extending the influence of the capture and discharge device in such a way that the SSFW width and height are fully covered. This improved innovative device was applied and evaluated in two subsurface flow wetlands, one on a pilot scale and one on a real scale. To evaluate the impact of the innovative device with respect to conventional one in the operational functioning of subsurface flow wetlands, the elimination of chemical oxygen demand was measured and compared. The results show that for the innovative device, the COD removal was 10% higher than for the conventional device, confirming the validity and effectiveness of the modifications implemented in the effluent capture and discharge devices used in SSFW.

Aiming for the problems emerging in the PWM drive system with long cables, accurate modeling of power cables is the premise to predict and analyze the relevant phenomenon, and a proper filter design is the key solution to these problems. This paper proposes high-frequency cable models to represent the frequency-dependent characteristics, especially for the high-frequency resistance of the cable that is an easily overlooked factor but determines the damping of overvoltage. The proposed models can be used for accurately representing the cable parameters in a wide frequency range, and correctly simulating the differential mode (DM) overvoltage and common mode (CM) current, including the peak value, oscillation frequency and damping of the transient waveform. In addition, improved filter networks are proposed to suppress the DM voltage and CM current, with the merit of low losses, small volume and an excellent ability of suppressing overvoltage. The proposed cable models and the filter design have been validated in a 750W PWM drive system with 200m power cables.

The agronomic characteristics of Cenchrus purpureus were assessed through a randomized block experimental design with seven accessions (Taiwan grass, King grass, Elephant grass, Merkeron, CT-115, Purpule grass and Maralfalfa) as treatments and four replications research was carried out at the Instituto Tecnológico Superior de Tantoyuca, in 2019 and 2020, under rainfed conditions. Sowing density was established at 36 tillers in 25 m2. Green and dry matter yield, daily rates of dry matter accumulation in leaves, leaf/stem ratio, height, leaf area index and cutting frequency were assessed. Rainfall amount, temperature, relative humidity and global radiation levels were recorded to assess their effect on the evaluated variables. One-way ANOVA and multivariate analysis techniques, such as multiple linear regression (MLR), Clustering, and Principal component analysis (PCA) with the Statistica V7 software, were used. The leaf area index was greatest (p &lt; 0.05) on the dry season. Green and dry matter yield were greatest in Maralfalfa (p &lt; 0.05). Variation in the results is attributed to weather phenomena; nonetheless, Elephant grass and Maralfalfa showed the highest yields. Quality parameters must be evaluated to identify those grasses with the best attributes.

Glutathione (GSH) is an antioxidant that our cells utilize to prevent damage done by reactive oxygen species, free radicals, peroxides, lipid peroxides, and heavy metals [1]. Due to its immune role in tuberculosis (TB), GSH is hypothesized to play an important part in the immune response against M. tb. Furthermore, one of the hallmark structures of TB is granuloma formation, which involves many types of immune cells. T cells specifically are a major component and are involved in the release of cytokines and activation of macrophages. GSH acts as an important function in macrophages, natural killer cells, and T cells in modulating their activation, their metabolism, the proper cytokine release, the proper redox activity, and free radical levels. For more susceptible patients with HIV and Type 2 Diabetes, the demand for higher GSH levels is increased. This review compiles reports demonstrating the benefits of GSH in improving the immune cell responses against M. tb infection and the use of GSH as adjunctive therapy for TB.

This work addresses the challenge of EEG visual multiclass classification into 40 classes for Brain-Computer interface applications, by using deep learning architectures. The visual multiclass classification approach offers BCI applications a significant advantage, since it allows the supervision of more than one BCI interaction, considering that each class label supervises a BCI task. However, because of the nonlinearity and nonstationarity of EEG signals, performing multiclassifiers based on EEG features remains a significant challenge for BCI systems. In the present work, mutual information-based discriminant channel selection and Minimum-Norm Estimate algorithms are implemented to select discriminant channels and enhance EEG data. Hence, deep EEGNet and Convolutional-recurrent neural networks are implemented separately to classify EEG data of image visualization into 40 labels. By using the k-fold cross-validation approach, average classification accuracies of 94.8% and 89.8% were obtained by implementing the aforementioned network architectures, respectively. Satisfactory results obtained with this method offer a new implementation opportunity for multi-task BCI applications by utilizing a reduced number of channels (&lt;50%), compared to those presented in the related literature where the whole set of channels is used.

In this research work, an adaptive scheme for the coordinated protection of AC Microgrids using directional overcurrent (DOCR) relays is presented. Protection of AC MGs is a complex and challenging issue due to the dynamic nature of the network including, a) its capability to reconfigure the modes of operation ranging from grid-connected to the islanded mode, c) bidirectional-power flow capability, and c) integration of intermittent renewable energy resources with real-time variations in the resource availability. Consequently, the fault current contributions may largely vary depending upon the incident conditions on the network. Conventional protection schemes, generally designed for radial networks, and unidirectional power flow from the source end to the load may either mal-operate or exhibit very poor performance, if not adapted according to the dynamic conditions of the network. To address this issue, a communication-based adaptive protection scheme capable to adapt its settings according to the generation resource availability and network configuration is presented in this work. The proposed scheme consists of an intelligent central protection unit (ICPU) capable to update the settings and communicate it to the individual relays based on the pre-calculated offline settings. The directional overcurrent relays employed in the scheme use two-stage settings, i.e. definite time and inverse definite minimum time characteristics for the effective coordination among the downstream and upstream relays. An adaptive algorithm for ICPU operation is presented and a case study is implemented for a modified IEEE 9-bus system using DigSilent Power factory. The results for various scenarios including, a) grid-connected mode of operation, b) islanded mode of operation, and c) variable distributed generation mode are obtained and compared to the static scheme, which validates the effectiveness of the proposed scheme.

Recently the polyvalent bacteriophage FP01, isolated from wastewater in Valparaiso, Chile, was described to have lytic activity across species against Escherichia coli and Salmonella enterica serovars. Due to it polyvalent nature the bacteriophage FP01 could have potential application in food and agri-industry. Also, fundamental aspects of polyvalent bacteriophage biology are not well known. In this study we sequenced and describe the complete genome of the polyvalent phage FP01 (MH745368) using the nanopore technology. The bacteriophage FP01 genome has a 44,900 bp, double-stranded DNA with an average G+C content of 49.41% and 90 coding sequences (CDSs). We found that the phage FP01 critically depends on host factors for replication and transcription. Also, it has a critical lysogenic repressor pseudogene. Phylogenetic analyses indicated that the phage FP01 is closely related to phages lambda and P22. These results suggest that the phage FP01 could be a lytic variant of a lysogenic phage or acquired genes from lysogenic phages during host infection.

When working with the novel coronavirus SARS-CoV-2 during a pandemic response, having a rapid, reproducible and reliable assay for infectious virus quantitation and utilization for evaluation of potential therapeutics is critical. Compared to traditional agarose overlay plaques visualized with neutral red, assays performed with Avicel R RC-591 semi-solid overlay provide a simplified format for rapid and easy detection and neutralization testing. The method is easily modified for higher throughput using dispensers or automated processing. Fixation using formalin provides flexibility when dealing with pathogenic agents such as SARS-CoV-2 where tissue culture plates might be removed from biocontainment for staining. Although plaque assays are considered straightforward in principle, having an easily reproducible, consistent plaque assay is an invaluable tool.

Different polyurethanes (PUs) were synthesized with polycarbonate polyols of molecular weights 500, 1000 and 2000 Da. Their self-healing abilities at 20 °C were tested and their structural, thermal, and mechanical properties were analyzed. The PUs made with polycarbonates of molecular weights 500 (YC500) and 1000 Da (YC1000) exhibited self-healing at 20 °C and the self-healing time of YC1000 was the shortest. The high mobility of the short polymeric chains, the absence of crystallinity and the low degree of micro-phase separation favored self-healing at 20 °C in YC500. However, the presence of tack and the existence of allophanate species and urethane-carbonate and urea-carbonate hydrogen bonds disfavored self-healing. Consequently, the self-healing time at 20 °C of YC500 was longer than expected. On the other hand, YC1000 exhibited an “equilibrium” between the urethane-carbonate and urea-carbonate hydrogen bonds and carbonate-carbonate interactions among the soft segments, so a particular structural order was produced which was associated to its fastest self-healing at 20 °C. The PU made with the polycarbonate of molecular weight 2000 Da did not exhibit self-healing at 20 °C because its significant micro-phase separation and the presence of semi-crystalline soft domains.

Two polyurethanes (PUs) were similarly synthesized by reacting a cycloaliphatic isocyanate with 1,4 butanediol and two polyols of different nature (polyester, polycarbonate diol) with molecular weights of 1000 Da. The PU made with polycarbonate diol polyol (YCD) was the only showing intrinsic self-healing at 20 °C. For assessing the mechanism of intrinsic self-healing of YCD, a structural characterization by molecular weights determination, infrared and X-ray photoelectronic spectroscopies, differential scanning calorimetry, X-ray diffraction, thermal gravimetric analysis and dynamic mechanical thermal analysis was carried out. It was concluded that the self-healing at 20 °C of YCD was due to non-covalent dynamic exchange interactions among the carbonate groups of the soft segments. Therefore, the chemical nature of the polyol played a key role in developing PUs with intrinsic self-healing at 20 °C.

The revaluation of agri-food waste to provide consumers with bioactive compounds for a healthy and environmentally sustainable diet is growing exponentially in society. In the present work, the chemical and physical properties of essential oils (EO) extracted from the peels of four citrus fruits grown and commercialized in Amazonas, Peru: lime (Citrus limetta Risso), sweet lemon (Citrus limetta sp.), mandarin (Citrus reticulata) and orange (Citrus sinensis) were determined. The essential oils were extracted using green solvent and then their antioxidant capacity was determined by 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) free radical scavenging technique; the total phenolic content using Folin Ciocalteu's reagent. Total flavonoids, refractive index, density, specific heat capacity, Ramam mapping and main phenolic compounds were also determined by liquid chromatography (UHPLC-DAD). It was found that lime and mandarin essential oils had higher antioxidant capacity (1592.38 and 1216.13 μmol TE/g) and higher total phenolic content (680.78 and 420.28 mg AGE/g); while sweet lemon peel essential oil had higher total flavonoid content (23.18 mg QE/g). Given their characteristics, these essential oils have a high potential for use in the food and/or pharmaceutical industry.

Active magnetic bearings have higher efficiency than other bearings because there is no physical contact. However, this benefit is mitigated by the addition of electrical power consumption. It is therefore important for magnetic bearings to have efficient power electronics. Gallium nitride-based transistors are a relatively new form of transistor which have shown to be more efficient than MOSFETs. There is an insufficient body of literature in the area of application of these transistors for magnetic levitation. This work presents a simple 1 degree-of-freedom voltage controlled levitation experiment in which levitation is achieved with both a gallium nitride transistor and a MOSFET.
Voltage losses and current consumption are measured when using each transistor during levitation. In particular, transients during open-to-closed and closed-to-open states are measured for PWM pulsing. It is found that the
gallium nitride transistor is superior in both switching time and efficiency in situ for magnetic levitation.

In the frame of the I-MOVE-COVID-19 project, a cohort of 2050 patients admitted in two Spanish reference hospitals between March 2020 and December 2021 was selected, and a range of clinical factors data were collected at admission to assess their impact on the risk COVID-19 severity outcomes through a multivariate adjusted analysis and nomograms. The need for ventilation and ICU admission were found directly associated with a higher mortality risk (OR 6.9 and 3.2, respectively). The clinical predictors of mortality were need for ventilation and ICU, advanced age, neuromuscular disorders, thrombocytopenia, hypoalbuminaemia, dementia, cancer, elevated CPK and neutrophilia (OR between 1.8 and 3.5), whilst the presence of vomiting, sore throat and cough diminished risk of death (OR 0.5, 0.2 and 0.1 respectively). Admission to ICU was predicted by the need for ventilation, abdominal pain and elevated LDH (OR 371.0, 3.6 and 2.2, respectively) as risk factors; otherwise, it was prevented by advanced age (OR 0.5). In turn, the need for ventilation was predicted by low oxygen saturation, elevated LDH and CPK, diabetes, neutrophilia, obesity and elevated GGT (OR between 1.7 and 5.2), whilst prevented by hypertension (OR 0.5). These findings could enhance patient management and strategic interventions to combat COVID-19.

As consequence of COVID-19, millions of households suffered mobility restrictions and changes in their lifestyle during several months. The aim of this study was to evaluate the effects of COVID-19 home confinement in food habits, lifestyle and emotional balance of the Spanish population. This cross-sectional study used data collected via an anonymous online questionnaire during the last month before lockdown finished in Spain in a total of 675 participants. 38.8% of the respondents experienced weight gain while 31.1% lost weight during confinement. The increase in body weight was positively correlated with the age (Rs = 0.14, p &lt;0.05) and BMI (Rs = 0.20, p &lt;0.05). We also identified that 39.7% reported poorer quality sleep, it was positively correlated with BMI (Rs = -0.18, p &lt;0.05) and with age (Rs = -0.21, p &lt;0.05). 44.7% of the participants had not performed physical exercise during confinement with differences by sex (p &lt;0.05), by age (p &lt;0.05), by BMI (p &lt;0.05) and sleep quality (p &lt;0.05). According to emotional-eater questionnaire, 21.8% and 11% were classified as emotional eater and very emotional eater, respectively. We emphasize the importance of adopting a healthy lifestyle, as the COVID-19 pandemic nowadays is ongoing.

The Ethnographic Museum in Dubrovnik holds an extensive textile collection that includes a range of dress and costume from Croatia and neighbouring countries. Until recently, the costumes were displayed on mannequins created by the academic artist Zvonimir Lončarić (1927–2004). His sculptures are expressive forms constructed from terracotta, fibreglass, wood, metal, acrylic paint and other materials selected for their visual appeal. Due to their importance, the museum considered the mannequins as protected artworks in the permanent exhibition, however, they had a harmful effect on the costumes displayed. In 2018, after completing a series of conservation-restoration projects within the collection, it was decided to replace the existing mounts with new, museum–quality mannequins. Two project–based learning workshops were organised, led by a team of textile conservators from the University of Dubrovnik and the Croatian Conservation Institute, in cooperation with the curator of the Ethnographic Museum. This case study highlights the challenges of exhibiting ethnographic costumes by discussing past presentation methods and how new solutions have been implemented conforming with the modern conservation-restoration profession. The new solutions consider ethics, decision–making processes, and the understanding of contemporary materials and methodology.

Microgrid is one of the promising green transition technologies that will provide enormous benefit to the seaport, as a solution to the major concerns in this sector, namely energy crisis, economical and environmental pollution. However, finest design of the microgrid is a challenging task considering different objectives, constraints and uncertainties involved. To ensure the optimal operation of the system, determining the right configuration framework and size for each component in the seaport microgrid at the minimum cost is a vital decision at the design stage. This paper aims to design a hybrid system of seaport microgrid with optimally sized component .The selected case study is the Port of Aalborg, Denmark. The proposed grid-connected structure consists of renewable energy sources (photovoltaic system and wind turbines), an energy storage system and cold ironing as seaport’ loads. The architecture is then optimized by utilizing HOMER to meet the maximum load demand by considering a few parameters such as solar global horizontal irradiance, temperature and wind resources. Then, the best configuration framework is analyzed in terms of economic feasibility, energy reliability and environmental impact.

Glucose is a simple sugar molecule. The sugar molecule is chemically symbolised as C6H12O6. This means that the glucose molecule contains 6 carbon atoms (C), 12 hydrogen atoms (H) and 6 oxygen atoms (O). In human blood, the molecule glucose circulates as blood sugar. Normally after eating or drinking, our body breaks down the sugars in food and uses them to obtain energy for our cells. To do this, our pancreas produces insulin. Insulin "pulls" sugar from the blood and puts it into the cells for use. If someone has diabetes, their pancreas can't produce enough insulin. As a result, the level of glucose in the blood rises. This can lead one to many potential complications, including blindness, disease, nerve damage, amputation, stroke, heart attack and damage to blood vessels etc. In this study, a non-invasive method for monitoring blood glucose has been developed and is therefore easily usable. The device developed can measure the glucose level continuously and eliminates the disadvantages of the invasive system. Near-IR sensors (optical sensors) were used to estimate the concentration of glucose in the blood; these sensors have a wavelength of 940 nm. The sensor is placed on the tip of the finger and the output of the optical sensor is then connected to the microcontroller at the analogue input. Another sensor used, but only to provide more medical information was the heartbeat sensor. After processing and regression analysis, the glucose level is predicted, and data is sent via the Bluetooth network to a developed APP. The results of the implemented device were compared with available invasive methods. The study consists of a hardware platform inserted into an armband and then a small black parallelepiped-shaped box in which the optical sensors are inserted. The hardware consists of a microcontroller, a Near-IR optical sensor, a heartbeat sensor and a Bluetooth module.

In recent years, numerous approaches have been developed to comprehend the molecular altera-tions underlying thyroid cancer (TC) oncogenesis and explore novel therapeutic strategies for TC. It is now well established that the neurokinin-1 receptor (NK-1R) is overexpressed in cancer cells and that NK-1R is essential for viability of cancer cells. The binding of substance P (SP) to NK-1R in neoplastic cells plays a pivotal role in cancer progression by promoting neoplastic cell growth, protecting tumour cells from apoptosis, triggering invasion and metastasis through enhanced migration of cancer cells, and stimulating endothelial cell proliferation for tumour angiogenesis. Remarkably, all types of human TC (papillary, follicular, medullary, anaplastic), as well as met-astatic lesions, exhibit overexpression of SP and NK-1R compared to the normal thyroid gland. TC cells synthesize and release SP, which exerts its multiple functions through autocrine, para-crine, intracrine, and neuroendocrine processes, including the regulation of tumour burden. Con-sequently, the secretion of SP from TC results in increased SP levels in plasma, which are signifi-cantly higher in TC patients compared to controls. Additionally, NK-1R antagonists have demonstrated a dose-dependent antitumour action. They impair cancer cell proliferation on one side and induce apoptosis of tumour cells on the other side. Furthermore, it has been demonstrat-ed that NK-1R antagonists inhibit neoplastic cell migration, thereby impairing both invasiveness and metastatic abilities, as well as angiogenesis. Given the consistent overexpression of NK-1R in all types of TC, targeting this receptor represents a promising therapeutic approach for TC. Therefore, NK-1R antagonists, such as the drug aprepitant, may represent novel drugs for TC treatment.

Percutaneous aortic valve replacement (TAVI) has become the treatment of choice for elderly patients with severe aortic valve stenosis because of its less invasiveness compared to surgery. However, it introduces new complications, such as vascular lesions, access site problems, paravalvular leaks, and aortic dissection. Aortic dissection after TAVI is rare but serious, occurring in 0.2% to 0.3% of cases, with both intraprocedural and late cases reported. This case study concerns a 68-year-old woman who developed Stanford B aortic dissection, external iliac artery dissection, and right common femoral artery occlusion after TAVI. Treatment included stenting of the iliac and common femoral arteries, followed by a staged procedure: debranching, thoracic endovascular aortic repair (TEVAR) and endovascular aneurysm repair (EVAR), with satisfactory results. This case, underscores the importance of vigilance in the management of TAVI-related complications to optimize patient care and outcomes.

Brushless Synchronous Machines (BSM) are replacing conventional synchronous machines with static excitation in generation facilities due to the absence of sparking and lower maintenance. However, this excitation system makes challenging measuring electric parameters in the rotor. This fact highly difficult the detection of ground faults, which are the most common type of electrical fault in electric machines. In this paper, a ground fault detection method for BSM is proposed. It is based on an inductive AC/DC rotating current sensor installed in the shaft. In case of a ground fault in the rotating parts of the BSM, a fault current will flow through the rotor’s sensor, inducing voltage in its stator. Analyzing the frequency components of the induced voltage the detection of a ground fault in the rotating elements is possible. The ground faults detection method proposed covers the whole rotor and discern between DC and AC sides. To corroborate the detection method, experimental tests have been performed using a prototype of this sensor connected to laboratory synchronous machines achieving satisfactory results.

Construction and demolition waste (CDW) represents 1/3 of the weight of all-waste produced. Increasing their recycling and reutilization with recycled aggregates (RA) means closing the life cycle of construction materials. Research has been carried out on artificial aggregates from the exclusive crushing of structural concrete waste in selective demolitions (CDWRConc). This study analyses the use of recycled concrete as graded aggregate (GARConc) and in cement soil (CSRConc). The material complies with the requirements as a road base, although due to the low values of resistance to fragmentation these materials are adequate for use in sensitive road systems and other places such as urban roads and car parks. The sensitive road systems are infrastructures in places of great natural wealth and low traffic intensity, with an annual average of heavy vehicle traffic (AADTh) below 50 vhp/d. As soluble salt contents have been detected, additional waterproofing or drainage measures must be adopted to prevent water infiltration into the layers made up of CDWRHorm. Finally, the high initial values of UCS allow the temporary passage of light vehicles over CSRConc after 3 days.

Incorporating renewables in the power grid presents challenges for stability, reliability, and operational efficiency. Integrating Energy Storage Systems (ESS) offers a solution by managing unpredictable loads, enhancing reliability, and serving the grid. Hybrid storage solutions have gained attention for specific applications, suggesting higher performance in some respects. This paper compares the performance of hybrid energy storage systems (HESS) to single battery, evaluating their energy supply cost and environmental impact through optimization problems. The model generates an optimized dispatch, minimizing cost or environmental impact of supplying energy to a generic load while considering battery degradation. Seven technologies are assessed, with an example applied to an industrial site contrasting vanadium redox flow (VRFB) and lithium batteries considering the demand of a local load (building). The results also indicates that efficiency and degradation curves have the highest impact in the final costs and environmental functions on the various storage technologies assessed. For the simulations of the example case, a single system only outperforms the hybrid system in cases where lithium efficiency is higher than approximately 87% and vanadium is lower approximately 82%.

As a medical student (Granada University Medical School, Spain), interested in Pediatrics, expended countless hours at the hospital pediatric facilities and got to know many of the children and their medical problems. A particular case, still vivid on my mind, awaken my scientific curiosity. One day, walking and talking with a seven years old child he unexpectedly felt down unconscious with multiple, incontrollable and erratic muscular contractions involving face, body and extremities and salivating. I was overwhelmed thinking it was the child’ last hour. At the time, my knowledge of epilepsy was nil. Following the seizures, the child was up, talking and walking with me as if nothing has happened and without any knowledge of the event. What could have caused the brain motor cortex to suddenly discharge that amount of altered activity causing generalized and erratic muscular contractions remains inexplicable. I migrated to USA, become a Pediatric (Developmental) Pathologist and Director of the Pediatrics Autopsy Service (1962-1999) at the Dartmouth-Hitchcock Medical Center, New Hampshire. I carried out countless postmortem studied of children brains, normal (unaltered) as well as those altered by hemorrhagic, hypoxic-ischemic and/or traumatic damage. With an NIH Fellowship, I spend one year (1967-68) at the Cajal Institute (Madrid, Spain) studying Cajal’ old Golgi preparations and learning about the method. Some of my Golgi studies of children’ brains have been published: The Human Brain. Prenatal Development and Structure, Springer, Heidelberg, Germany, 2012. The present monograph explores the developmental neuropathology of selected perinatal cortical injuries through their acute, subacute and chronic stages. Including: a) how an altered neuronal activity evolves in a damaged cortical region; b) how it moves through the cortex (epileptic auras); and c) how it reaches the motor cortex to be discharged as erratic and incontrollable muscular contractions. Understanding these processes should provide insights into the pathogenesis of epilepsy secondary to perinatal brain damage.

Weight loss solutions are on the rise, and there is growing interest in natural alternatives to the pharmaceuticals in the market, which are not devoid of relevant side effects. To this end, the objective of the current study is to assess the effects of a botanical-based blend comprised of lemon verbena and hibiscus extracts in weight management, body fat, appetite, lipid, and glucose profiles, in an overweight population, for 90 days. As a result, the volunteers presented significant weight loss in absence of diet, which coincided with decreased body fat. Body fat was assessed by anthropometry, electrical bioimpedance and DEXA scan. Cholesterol levels were also significantly decreased. Satiety assessment revealed that the product contributed to increased feeling of fullness and satisfaction after a meal, compared to the placebo group, which could contribute to the weight loss observed. Blood glucose and blood pressure levels remained unchanged, which was expected as the volunteers were normoglycemic and their blood pressure was in the healthy range. In conclusion, daily supplementation of a botanical-based blend contributes to weight loss in overweight individuals, in absence of diet, while not affecting other parameters that are in the healthy range. This product could be a candidate alternative or add-on to other weight loss products, as part of a healthy lifestyle.

As most of the videos are destined for human perception, many techniques have been designed to improve video coding based on how the human visual system perceives video quality. In this paper, we propose the use of two perceptual coding techniques, namely contrast masking and texture masking, jointly operating under the High Efficiency Video Coding (HEVC) standard. These techniques aim to improve the subjective quality of the reconstructed video at the same bit rate. For contrast masking, we propose the use of a specific weighting matrix for each block size (from 4×4 up to 32×32). We achieve average Bjøntegaard Delta-Rate (BD-rate) gains of between 2.5% and 4.48%, depending on the perceptual metric and coding mode used. The texture masking scheme is based on the classification of each coding unit, using its mean directional variance features as input to a support vector machine model. According to this classification, the block’s energy, the type of coding unit, and its size, an over-quantization is computed to provide a QP offset (DQP) for this coding unit. By applying both techniques in the HEVC Reference Software, an overall average of 5.79% BD-rate gain is achieved.

Arsenic is naturally present in many geological formations around the world and is a major source of groundwater contamination. Bolivia is not exempt from this problem. Physical-chemical studies of water quality in deep and shallow wells have determined the presence of arsenic in some areas of the Bolivian Altiplano, valleys, and plains. In the Lake Poopó basin, water from shallow wells (up to 30 m) has arsenic concentrations that exceed the Bolivian drinking water standard and the WHO recommendation of 10 μg-As/l by up to 25 times. In peri-urban areas of Cochabamba, the arsenic content in groundwater is up to 113 μg-As/l. chronic exposure to arsenic is associated with neurological and dermatological problems and carcinogenic effects. To date, no measures have been taken to mitigate the arsenic problem for the rural population, who often rely on arsenic-contaminated water as their only source of drinking water. This contamination represents a serious threat to the health and economic well-being of the inhabitants and ecosystem in these areas. In this work, for arsenic removal, iron and iron oxide nanoparticles obtained from recycling metal chips by top-down and bottom-up technology have been used for arsenic adsorption in an experimental filter combined with other artisanal filtering materials in the form of layers. The results have shown that water contaminated with arsenic after passing through the filter reduces the concentration of total arsenic filtered from 83, 52 ppb to less than 5 ppb, less than the Bolivian standard 512 of 10 ppb for drinking water.

While adequate for English-speaking users in the United States, as well as many Commonwealth countries and other English-speaking jurisdictions (e.g., Canada, Australia, New Zealand or South Africa among others), typing in Romance Languages (Spanish, French, Portuguese and Italian) by using a standard US-QWERTY Keyboard is not easy since it is not adapted to special characters such as accented vowels, tildes and cedillas or ligatures, used in Romance Languages. With regard to the International Layout, intended to enable access to the most common diacritics used in Western European Languages, the problem comes from the fact that accented vowels are spread throughout the Keyboard layout, and their uppercase versions need chord combinations which can require good manual dexterity. This paper will analyze how the Spanish or Portuguese Keyboards are the best options for these users since they are QWERTY-based and the most compatible ones for the different character sets in Spanish, French, Portuguese and Italian Languages.

In the present work we revise and extend the Characteristic Crystallographic Element (CCE) norm, an algorithm used to simultaneously detect radial and orientational similarity of computer-generated structures with respect to specific reference crystals and local symmetries. Based on the identification of point group symmetry elements, the CCE descriptor is able to gauge local structure with high precision and finely distinguish between competing morphologies. As test cases we use computer-generated monomeric and polymer systems of spherical particles interacting with the hard-sphere and square-well attractive potentials. We demonstrate that the CCE norm is able to detect and differentiate, between others, among: hexagonal close packed (HCP), face centered cubic (FCC), hexagonal (HEX) and body centered cubic (BCC) crystals as well as non-crystallographic fivefold (FIV) local symmetry in bulk 3-D systems; triangular (TRI), square (SQU) and honeycomb (HON) crystals, as well as pentagonal (PEN) local symmetry in thin films of one-layer thickness (2-D systems). The descriptor is general and can be applied to identify the symmetry elements of any point group for arbitrary atomic or particulate system in two or three dimensions, in the bulk or under confinement.

This article aims to understand the domains and conceptual uses of contagion, its modalities and its effects, in its different historical contexts and meanings, as an expression of the process of interdependence between the positions and the different points of view of different actors involved in multiple scientific, moral, social and political challenges. Another objective focuses on understanding the process of collective management of contagion, disease and health, where prevention is an essential element of its objectives and justifications, its discursive order, as well as its practical activities.

Covid-19 is a disease caused by SARS-CoV-2, which has spread worldwide since the beginning of 2020. Several pharmaceutical and non-pharmaceutical strategies were proposed to contain the virus dissemination, including vaccination and lockdowns. One of the consequences of the pandemic was the denial or delay of access to convenient health care services, but also potentially the increase of adverse events within those services, like the number of hospital infections. Therefore, the main question here is: What happened to the performance and sustainability of hospitals? The main goal of this work was to test if the Portuguese public hospitals' performance has been affected by the SARS-CoV-2 pandemic. We used the Benefit-of-Doubt method integrated with the Malmquist Index to analyze the performance evolution over time. Then, we employed a multiple regression model to test whether some pandemic-related variables could explain the performance results. We considered a database of 40 Portuguese public hospitals evaluated from January 2017 to May 2022. The period 2017 to 2019 corresponds to the baseline (pre-pandemic), against which the remaining period will be compared (during the pandemic). We also considered fourteen variables characterizing hospital quality, divided into three main performance definitions (efficiency and productivity; access; safety and care appropriateness). As potential explanatory variables, we consider seven dimensions, including vaccination rate and the need for intensive care for Covid-19 infected people. Results suggest that Covid-19 pandemic features help explain the drop on access after 2020, but not the evolution of safety and appropriateness of care, which surpris-ingly increased the whole time.

3,4-methylenedioxypyrovalerone (MDPV) is a new psychoactive substance (NPS) and the most widespread and life-threatening synthetic cathinone of the “bath salts”. Preclinical research has proven the cocaine-like psychostimulant effects of MDPV and its potential for abuse. Cannabidiol (CBD) is a non-psychotropic phytocannabinoid that has emerged as a new potential treatment for drug addiction. Here, we tested the effects of CBD (20 mg/kg) on MDPV (2 mg/kg)-induced conditioned place preference and MDPV (0.05 and 0.075 mg/kg/infusion) self-administration paradigm. We also assessed the effects of the combination of CBD, and MDPV (3 and 4 mg/kg) on anxiety-like behaviour using the elevated plus maze (EPM). CBD mitigated the MDPV-induced conditioned place preference. On the contrary, CBD administration throughout the MDPV (0.075 mg/kg/infusion) self-administration increased drug-seeking and taking behaviours, but only in the high-responders group of mice. Additionally, CBD exerted anxiolytic-like effects, but only in MDPV-treated mice. Taken together, our results indicate that CBD modulation of MDPV-induced motivational responses in mice vary depending on the requirements of the learning task, resulting in a complex response. More research attempting to decipher the behavioural and molecular interactions between CBD and MDPV is needed.

The minimum energy structures of the Si3C5 and Si4C8 clusters are planar and contain planar tetracoordinate carbons (ptCs). These species have been classified, qualitatively, as global () and local () aromatics according to the adaptive natural density partitioning (AdNDP) method, which is an orbital localization method. This work evaluates these species' aromaticity, focusing on confirming and quantifying their global and local aromatic character. For this purpose, we use an orbital localization method based on the partitioning of the molecular space according to the topology of the electronic localization function (LOC-ELF). In addition, the magnetically induced current density is analyzed. The LOC-ELF-based analysis coincides with the AdNDP study (double aromaticity, global and local). Besides, the current density analysis detects global and local ring currents. The strength of the global and local current circuit is significant, involving 4n+2 - and -electrons, respectively. The latter implicates the Si-ptC-Si fragment, which would be related to the 3c-2e -bond detected by the orbital localization methods in this fragment.

Sociology and History as consolidated scientific and academic projects have maintained a peculiar and paradoxical relationship. The growing disciplinary and subdisciplinary specialization of these two sciences poses relevant epistemological and methodological challenges to face potential situations of isolation, fragmentation and enable the apology of an interdisciplinary perspective characterized by the historicity of social structures, actions and senses.Several types of reasons shape this diffuse process of approach/distinction between Sociology and History, namely, epistemological and methodological, disciplinary closure, academic, professional, configuring what can be called contained dialogues. This paper, starting from the sociological perspective of the authors, seeks to contribute to the reflection on the relevance of a scientific project aimed at affirming an interdisciplinary perspective that may foster the heuristic potentialities of both Sociology and History in the analysis of the complexity of social reality and human action.

Currently, the textile industry is a poorly automated sector, due in part to problems in the handling of deformable leather and textile parts during production operations. In this work, several problems in the handling process of leather and textile parts are addressed, introducing methods to increase the automation of the process. A pneumatic actuator designed to pick up textile or leather parts avoiding their deformation during transport has been developed. This actuator maximizes the number of gripping points to improve handling, making it more stable and efficient. Additionally, a vision system has been implemented in the part picking task which, in conjunction with the CAD information of the part, sends the modified gripping position of the part to the robot. This allows customized handling of each textile or leather part. Finally, validation tests have been carried out on this development, both in simulations and in laboratory conditions, demonstrating its viability and direct applicability in the production line.

The Textile and Clothing (T\&C) value chain is one of the most polluting in the world and one that produces the most waste. It is, therefore, important to encourage the Circular Economy (CE) model in this sector, to reduce pollution and mitigate the effects of waste production, and consequently increase environmental sustainability. For that, the involvement of the final consumer is essential. And, the final consumer's use of an Eco-gamified application for registering and promoting Consumer-to-Consumer (C2C) and Consumer-to-Business (C2B) activities, which extends the life time of textile products, is of utmost importance. In this article, we survey gamification frameworks for analyzing system design level techniques that enable engaging the final consumer in the CE process. Then, we select and use one of such frameworks, Gameful Design Heuristics (GDH), for defining the gamification structure needed to implement on a Business-to-Consumer-to-Consumer (B2C2C) context of a circular economy. As result, we present a B2C2C circular business process model for the T\&C value chain, and propose the design model of a gamified platform for the final consumers, which allows them to register the C2B and C2C activities, from the circular value chain's business process, and benefit from a game-like experience. All model features have been mapped to GDH framework heuristics, validating that it is possible to support a set of defined heuristics of applied gamification for promoting CE in the T\&C value chain.

Iapetus, a Saturn moon, shows the most differentiated albedo dichotomy of the Solar System. The dark leading side has a lower albedo than the bright trailing side. Spectral data on the visible light reveal the existence of two types of materials on the surface. The darkening in the leading side is thought to be originated by the presence of organic material and carbonaceous compounds on surface, while the trailing side is covered by water ice due to migration processes from the dark side. On airless bodies like Iapetus, the surface escape speed is greater than the speed of water molecules, resulting in the retention of a H2O atmosphere that allows some species to get diffused through it. Here, there were performed simulations of the evolution of the surface temperature for each of the two hemispheres of Iapetus. The results showed a slow yet steady increment of temperatures for both sides, with a steeper slope for the dark hemisphere. It was also simulated how much energy budget can be accumulated in both sides and its consequences. Finally, we calculated the diffusion coefficients for ammonia, methane, and water ice. The results let us infer how these compounds could evolve over time.

This study addresses the implementation of the International Financial Reporting Standard 9 (IFRS 9) in the European Union as of January 1, 2018, replacing the International Accounting Standard 39 (IAS 39) to introduce a new model for recognizing Loan Loss Provisions (LLP) based on Expected Credit Loss (ECL). This model responds to criticisms of the former Incurred Credit Loss (ICL) system for its inability to reflect credit losses in a timely manner, potentially exacerbating the effects of financial crises (Bushman &amp; Williams, 2015; Gebhardt &amp; Novotny-Farkas, 2011). The study focuses on the effects of adopting the ECL model on the level of Loan Loss Allowances (LLA) in loans, own equity, and the Common Equity Tier 1 (CET1) ratio across 13 Portuguese commercial banks. A mean comparison test is used to evaluate scenarios before and after the application of the ECL model, highlighting the importance of regulator actions and the adequacy of loss recognition policies, including the effects of Regulation (EU) 2017/2395 of December 12. The results obtained demonstrate significant negative impacts on the net values of loans, own equity, and the CET1 ratio upon adopting the IFRS 9 ECL model, due to the widespread increase in LLAs.

This paper presents high-resolution digital measurements at low cost, combining oversample and averaging. Experiments of processing data between samples and between multiple temperature sensors in the same environment are conducted. They provide results with effective increase in the analog to digital converter bits, in correspondence with the minimization on the effects of noise. It is shown that averaging a set of small, low-cost sensors at a small microcontroller can give flexible access to improved measurement accuracy.

The European mink (Mustela lutreola) is one of Europe's most endangered species, and it is on the brink of extinction in the Iberian Peninsula. The species' precarious situation requires the application of new ex-situ conservation methodologies that complement the existing ex-situ and in-situ conservation measures. Here, we report for the first time the establishment of a biobank of European mink mesenchymal stem cells (emMSC) and oocytes from specimens found dead in the Iberian Peninsula, either free or in captivity. New emMSC lines were isolated from different tissues: bone marrow (emBM-MSC), oral mucosa (emOM-MSc), dermal skin (emDS-MSC), oviduct (emO-MSc), endometrium (emE-MSC), testicular (emT-MSC), and adipose tissue from two different adipose depots: subcutaneous (emSCA-MSC) and ovarian (emOA-MSC). All the eight emMSC lines showed plastic adhesion, detectable expression of characteristic markers of MSCs and, when cultured under osteogenic and adipogenic conditions, differentiation capacity to these lineages. Additionally, we were able to keep 227 Cumulus-oocyte complexes (COCs) in the biobank, 97 of which are grade I or II. The European mink MSC and oocyte biobank will allow for the conservation of the species' genetic variability, the application of assisted reproduction techniques, and the development of in vitro models for studying the molecular mechanisms of infectious diseases that threaten the species' precarious situation.

. Sealants and adhesives are used in the repair and preservation of damaged solid organs. This study examines the matrix metalloproteinases (MMP) activity in the healing of liver injuries treated with two biological adhesives (Tachosil® and GelitaSpon®) as well as that of a new elastic cyanoacrylate (Adhflex®). Methods. We induced in 90 male rats hepatic lesions using a Stiefel biopsy punch in the liver. Wound healing was assessed 2, 6, and 18 days after injury by quantifying MMP1, 2, 8, 9, and 13 tissue levels. The histopathological repair was evaluated by hematoxylin-eosin, Masson’s trichrome, and Periodic Acid Schiff (PAS) staining and CD31, CD68 immunohistochemical marker. The three sealants used contributed to the complete healing of hepatic lesions. Both histopathology and MMP findings point to the fact that degradation with Adhflex® is slower and causes a strong inflammatory reaction at the onset of healing. Results. All the MMPs measured showed higher values early in the healing process in animals treated with Adhflex® and Tachosil, expression for MMP2 and MMP9 being significantly higher in the Adhflex-treated group. Animals treated with Tachosil had significant greater values of MMP8 and MPP13 than the Adhflex group. Animals treated with Adhflex® showed a sustained overexpression in all MMPs even at the latest wound healing stages. Conclusion. Notably, the overexpression of the MMPs did not negatively influence the histological healing process of liver injuries. Since all hepatic trauma injuries should be treated as emergencies, any easy-to-use and rapid sealant, like Adhflex®, could be considered an adequate treatment option.

Background: The febrile patient from tropical areas, in which emerging arboviruses are endemic, represent a diagnostic challenge and potential co-infections with other pathogens (i.e bacteria or parasites) are usually overlooked. Objectives: We present a case of an elderly woman diagnosed with dengue, chikungunya and Leptospira interrogans co-infection. Study Design: Case report. Results: An 87-year old woman from Colombia complained of upper abdominal pain, arthralgia, myalgia, hyporexia, malaise and intermittent fever accompanied with progressive jaundice. She had a medical history of chronic heart failure (Stage C, NYHA III), without documented cardiac murmurs, right bundle branch block, non-valvular atrial fibrillation, hypertension, and chronic venous disease. Her cardiac and pulmonary status quickly deteriorated after 24 hours of her admission without electrocardiographic changes and she required ventilatory and vasopressor support. In the next hours the patient evolved to pulseless electrical activity and then she died. Dengue IgM, NS1 ELISA, MAT for Leptospira interrogans and RT-PCR for chikungunya, were positive. Discussion: This case illustrates a multiple co-infection in a febrile patient from a tropical area of Latin America that evolved to death.

Larus michahellis increased its population throughout the 20th century in its worldwide distribution area. The increase in the Salinas de San Pedro del Pinatar has produced changes in the habitats due to the contribution of guano, predation on birds, incidents with workers, and the production of salt. The objective is to analyze the impacts of L. michahellis on the landscape, habitats, waterfowl, salt production, and workers, as well as to evaluate the effectiveness of control activities. Censuses of wintering L. michahellis have been carried out between 1990-2021, of nesting aquatic birds between 1994-2021, and nests and eggs of L. michahellis have been eliminated between 2000-2021. The result has been a decrease in pairs of L. michahellis, recovery of waterfowl populations, colonization of others, absence of incidents with workers, and reduction of damage to salt production. However, to reach a definitive solution, measures should be adopted to prevent L. michahellis from accessing the main sources of human food: urban solid waste dumps, aquaculture farms, and fish discards.

Zn2GeO4 is considered a very promising alternative to current luminescent semiconductors. Previous results suggest that its emitted wavelength may depend on different variables, such as particle size and morphology, among others. In this work, we have prepared pure and highly homogeneous Zn2GeO4 nanorods under hydrothermal synthesis conditions with a willemite-like structure. Their luminescent properties have been explored and their band gap estimated, which are distinct to previously reported Zn2GeO4 bulk particles. Therefore, our results identify particle morphology as a crucial factor for maximizing and fine-tuning the luminesce of Zn2GeO4 nano-phosphors.

The objective was to model the teams’ style of play (SoP) in elite football and relate them to the match result. For this, the twenty Spanish first division teams in the 2016-17 season were analysed, using nine interaction performance indicators (IRi). A principal component (PC) analysis was applied. From two PCs four SoPs were established: deep or high-pressure defending, and elaborate or direct attack. The SoPs were distributed according to average performance obtained throughout the championship. The connection between the preferred SoP and the final result was estimated. Teams with elaborate offensive styles and teams defensively minded got better results. In addition, most of the teams showed variability in their SoP. The applications of the study are: 1) the IRi have served to identify SoP and can be used as a reference to optimize team performance; 2) teams should have a varied SoP repertoire, as well as being prepared to deal with different SoPs; 3) particular player profiles should be connected with the desired SoP when creating the squad. 4) clubs should develop a varied range of SoPs at their academies.

Yellow pitahaya is a tropical fruit that has gained popularity in recent years. Natural elicitors are compounds that can stimulate the resistance and quality of fruits. The objective of this study was to evaluate the effects of natural elicitors: methyl salicylate (MeSa), methyl jasmonate (JaMe), salicylic acid (SA) and oxalic acid (OA) at concentrations of 0.1 mM (SaMe and JaMe) and 5 mM (SA and OA), applied to the yellow pitahaya fruits, under greenhouse conditions. After full blossom, 4 applications were made with a frequency of 15 days. At time of harvest and after storage, the following variables were evaluated: firmness (whole fruit), total soluble solids (TSS), total acidity (TA), phenolics and carotenoids (in the pulp), while phenolics, carotenoids, macronutrients and micronutrients were determined in the peel. The results showed that JaMe presented a delay of the ripening process, according to TSS, TA, firmness, and total phenolic compounds results, while MeSa advanced the fruit maturation. Regarding the alternative use of the peel as by-product, the application of natural elicitors significantly increased the content of polyphenols, carotenoids, macronutrients and micronutrients in the peel, which can be used as a bioactive compound in the food industry. In conclusion, the results indicate that natural elicitors can be an alternative to improve the quality and shelf life of yellow pitahaya fruits.

This study examines the matrix metalloproteinase (MMP) activity in the healing of liver injuries treated with biological adhesives Tachosil^® and GelitaSpon^® and the elastic cyanoacrylate Adhflex^®. Hepatic lesions were induced in male rats using a Stiefel biopsy punch. Healing was assessed 2, 6, and 18 days after injury by quantifying tissue levels of MMP1, 2, 8, 9, and 13. Histopathological repair was evaluated using hematoxylin-eosin, Masson’s trichrome, and Periodic Acid Schiff (PAS) staining and immunohistochemical markers CD31 and CD68. The sealants contributed to complete healing. Histopathology and MMP findings indicate that Adhflex^® has slower degradation and a strong inflammatory reaction at the onset of healing. Early on, all MMPs showed higher levels in Adhflex^® and Tachosil^®-treated animals, and MMP2 and MMP9 expressions were significantly higher in the Adhflex-treated group at 18 days post-injury (T3). The Adhflex^® group had significantly higher MMP8 and MPP13 levels than other treated groups and showed a sustained overexpression of all MMPs, even in the latest healing stages. Notably, the overexpression did not negatively influence the histological healing process. All hepatic trauma injuries should be treated as emergencies, and any easy-to-use and rapid sealant like Adhflex^® could be considered as an option for treating liver trauma.

Surveillance is the systematic data collection, analysis, and interpretation essential to planning and implementing control activities. The lack of success in control and surveillance elsewhere for the Ae. aegypti mosquito demands developing new accessible and effective strategies. This work aimed to develop and evaluate an adhesive and lure trap for household indoor and outdoor surveillance of Ae. aegypti. Based on a bibliographic review, four compounds with significant attraction percentages for Ae. aegypti were considered. Our more effective blend was determined by preliminary bioassays using the high-throughput screening system (HITSS) and 90 × 90 cm mosquito cages. We designed a low-cost, pyramid-shaped, sticky cardboard trap to incorporate the selected blend. Semi-field 2 x 2 m cages and field tests were conducted to evaluate its effectiveness through mosquito capture percentages. In laboratory tests, blend number 2 presented an attraction percentage of 47.5 ± 4.8%; while in semi-field cages, a 4-inch, 110-v powered fan was used to disperse the attractants, then a similar capture percentage of 43.2 ± 4.0 % was recorded. Field evaluation of the at-house indoor environment and comparing it with the golden standard BG-Sentinel trap recorded interesting results, i.e., an average of our prototype 6.0 ± 1.5 trapped mosquitoes versus 10.0 ± 2.6. In most Latin American countries, there is a lack of formal and accessible strategies for monitoring adult populations of Ae. aegypti, therefore, must develop tools that reinforce entomological surveillance methods.

This study presents a systematic review to evaluate the effectiveness of virtual patients in enhancing clinical reasoning skills in medical education, utilizing a hybrid methodology that combines human reviewers and ChatGPT. By analyzing various studies involving conversational virtual patients, the review examines the impact of these digital tools on student learning outcomes and satisfaction. Consistent with previous systematic reviews, our findings suggest that conversational virtual patients can improve clinical competencies, particularly in history-taking and clinical reasoning. Regarding student feedback, satisfaction tends to be higher when virtual patients’ interactions are more realistic, often due to the use of artificial intelligence (AI) and natural language processing (NLP) in the simulators. Furthermore, the study compares the accuracy of AI-driven reviews with human assessments, revealing comparable results. This research highlights AI’s potential to complement human expertise in academic evaluations, contributing to more efficient and consistent systematic reviews in rapidly evolving educational fields.

Many drylands around the world have seen both soil and vegetation degradation around watering points. It can be seen in spaceborne imagery as radial brightness belts that fade with distance from the water areas. The study's primary goal was to characterize spatio-temporal land degradation/rehabilitation in the drylands of the southeast Iberian Peninsula. The brightness index of Tasseled Cap was discovered to be the best spectral transformation for enhancing the contrast between the bright-degraded areas near the points and the darker surrounding areas far from and in-between these areas. To comprehend the spatial structure present in spaceborne imagery of two desert sites and three key time periods, semi-variograms were created (mid-late 2000s, around 2015, and 2020). In order to assess spatio-temporal land-cover patterns, a geostatistical model (kriging) was used to smooth brightness index values extracted from 30 m spatial resolution images. To assess the direction and intensity of changes between study periods, a change detection analysis based on kriging prediction maps was performed. These findings were linked to the socioeconomic situation prior to and following the EU economic crisis. The study discovered that degradation occurred in some areas as a result of the region's agricultural activities being exploited.

This study aimed to assess the psychological effects of being processed by the justice system, either as a plaintiff or as a defendant. The sample consisted of 360 subjects, 32.8% defendants and 52.2% plaintiffs, residents in the Autonomous Community of Galicia (NW Spain). A lot of psychological test were administered. The results indicated significant differences between plaintiffs and defendants. The former were more pessimistic about the future, used poor strategies for protecting health, and had less empathy. In contrast, defendants had a more negative outlook on life, and in general more psychosomatic symptomology. Thus, both defendants and plaintiffs suffered health problems. Moreover, the group with the longest exposure to litigation had the worst deteriorated health. In conclusion, defendants were more pessimistic about the future, used poor strategies for protecting their own health, and showed less empathy. Likewise, plaintiffs had a more negative outlook on life, and on the whole presented more psychosomatic symptomology. Thus, both defendants and plaintiffs presented health problems. Moreover, the comparison between litigants and non-litigants showed health was more deteriorated in the former, but only in a few specific variables.

The purpose of this disquisition is to analyze bullfighting, its advances and setbacks at a global and local level in terms of animal law. It was developed as a descriptive documentary research with a non-experimental design, using the observation and interpretation of documents related to the subject, from the global level, to the local, the national, specific to the regions and communities, being interpreted through the hermeneutic method. In the analysis, results were reached such as: every day more countries are willing to assume that bulls, because they are living beings that feel, are being attended to from the legal and the ethical, propitiating changes in the way of thinking of people in terms of wanting to consider bullfighting, a sport, art and hobby considered cultural heritage of many countries. For this reason, different actions have been generated from surveys, to define the acceptance or not of these events. It is concluded that there are important advances in this regard, as bullfighting is being prohibited in different parts of the world, taking into account the protection that protects animals, but the laws do not establish specific prohibition in this regard worldwide.

Stochastic mortality models seek to forecast future mortality rates; thus, apparently the objective variable should be the mortality rate expressed in the original scale. However, the performance of stochastic mortality models - in terms, that is, of their goodness-of-fit and prediction accuracy - is often based on the logarithmic scale of the mortality rate. In this article, we examine whether the same forecast outcomes are obtained when the performance of mortality models is assessed based on the original and log scales of the mortality rate. We compare four different stochastic mortality models: the original Lee-Carter model, the Lee-Carter model with (log-)normal distribution, the Lee-Carter model with Poisson distribution and the median Lee-Carter model. We show that the preferred model will depend on the scale of the objective variable, the selection criteria measure and the range of ages analysed.

All hydropower project type requires an ample availability of stream flow data. Unfortunately most of the hydropower projects especially small hydropower projects are conducted on ungauged river and consequently hydrologists have for a longtime used stream flow estimation methods using the mean annual flows to gauge rivers. Unfortunately flow estimation methods which include the runoff data method, area ratio method and the correlation flow methods employ a lot of assumptions which affect their uncertainty. Although hydropower energy is one of most promising clean energy technologies available, it has potential drawbacks as compared with various other forms of renewable energy, such as biomass, solar and wind energy, due in particular to it high capital investment costs. For most of the rural population in Mozambique, access to conversional energy in the form of electricity is limited. The aim of the present investigation was to analyze the functions of the Chua micro-hydropower plant in the Manica district in Mozambique and to examine the possibility of increasing energy production there. The total power generation capacity currently installed in Mozambique is about 939 MW. Hydropower accounts for 561 MW or 61% of this, oil and natural gas in turn, for 27% and 12% of it, respectively.

Cleomella serrulata is a native flowering plant found in North America. Even though this plant is of ecological and native medicinal importance, very little is known about the genomic makeup of Cleomella and the Cleomaceae family at large. Here we report the complete chloroplast genome of Cleomella serrulata and provide an evolutionary comparison to other chloroplast genomes from Cleomaceae and closely related families. This study confirms the taxonomic placement of Cleomella as a distinct genus, but also provides phylogenetic insights that imply potential adaptive strategies and evolutionary mechanisms driving genomic diversity of the Cleomella genus. Whole genome-based and ANI comparisons indicate that the Cleomella species form a distinct clade that is about equidistant from the other Cleomaceae genera as it is from the genera from the nearby Capparaceae and Brassicaceae. This is the first complete chloroplast-based phylogenetic comparison of Cleomella species to other related genera and helps refine the complex taxonomic distinctions of the Cleomaceae.

Second-level hospitals face peculiarities that hinder the implementation of the hearing rescreening protocol, which are not uncommon in other settings. This study analyzes the hearing rescreening process in this kind of hospital. A total of 1130 individuals were included. In this cohort, 61.07% were newborns in the hospital who failed their first otoemission test after birth (n=679) or were unable to have the test performed (n=11), then being referred to outpatient clinic. The remaining 38.93% were individuals who were born in another hospital with their first test conducted in the outpatient clinic (n=440). A high amount of rescreenings were made outside the recommended time frame, mainly in children referred from another hospital. There was a high rate of lost to follow-up especially with otolaryngologist referrals. Neonatal Hearing screening in second level hospitals is difficult because of the staffing and time constraints. This results in longer than recommended turnaround times and interferes with the timely detection of hearing loss. This is particularly serious in outpatients. Referral of children with impaired screening to out-of-town centers leads to unacceptable loss of follow-up. A legislative support for all these rescreening issues is necessary. We discuss these findings and propose some solutions.

Plastics are very versatile materials that have contributed to the development of society since the 19th century, however, their mismanagement has led to an accumulation of waste in almost every ecosystem affecting the fauna of the planet. In this way recently, studies have shown that some insects might be able to adapt, consuming a wide range of hydrocarbon base polymers. In this work it was studied the adaptive capacity of Zophobas morio larvae when feeding on different synthetic polymers derived from petroleum. Four 30-day larval feeding treatments were carried out with synthetic polymers as expanded polystyrene (PS), low density polyethylene (PBD), polyisoprene (PI) and butyl rubber (BT), in addition a positive control of organic diet was included. Intestinal bacteria were isolated from the treatments and identified by Sanger sequencing. To analyze the chemical composition and physical form of the frass produced, fourier transform infrared spectroscopy (FITR) and images of the feces surface were taken with scanning electron microscopy (SEM) respectively. Zophobas morio larvae were able to consume 54% of PS in 30 days, equivalent to 3.2 mg/d/larva. Nine bacterial strains associated with the decomposition of synthetic polymers were identified in the intestine of the larvae. As for the physicochemical analysis of the feces, FTIR spectra showed the scission of bands corresponding to functional groups of the synthetic polymers in the comparison of the plastic diet treatments versus the feces of antibiotic-treated and plastic-fed larvae, while the comparison of spectra of the plastic and control treatments also identified differences in the absorption peaks. SEM imaging demonstrated that superworm feces differed in dependence on the substrate consumed. The findings demonstrate that Zophobas morio larvae possess a gut biological complex that allows them to feed and survive by consuming various petroleum-derived polymers.

The number of physical devices connected to the Internet such as vehicles, household appliances and other "things" has been steadily increasing in recent years, thus forming the basis for the Internet of Things (IoT). IoT ecosystem extends beyond country borders and application domains, combining thousands of versatile devices that differ in terms of their structures, capabilities, and available resources. It is therefore not surprising that the landscape of wireless communication technologies and the degree of IoT devices available today is excessively broad and diverse. Interference between networks leads to frame collisions and consequent packet loss. Frame collisions occur when two or more packets overlap in time and frequency and use the same LoRa parameters, i.e. the same spreading factor (SF), bandwidth (BW) and carrier frequency (CF). When most devices use the same configuration, collision probability is higher. The probability of frame collisions is also affected by traffic characteristics, particularly the periodicity of the transmission and the payload size. Larger payload sizes and more frequent transmissions accumulate with higher time on air (ToA) and channel occupancy [1]. Transmission powers and the location of the gateways also influences this situation. The aim of this experimental work is to verify the effects of collisions and interference in LoRaWAN, regarding the periodicity of transmissions and the payload sizes. The hardware used is an Arduino board programmed in C/C++, a LoRa Bee module operating at a frequency of 868 MHz and a LoRaWAN LG02 gateway. Different scenarios were tested in an outdoor environment, with Line of Sight and Non-Line of Sight, and different variables such as: SFs equal to 7, 9 and 12; distances of 20, 40 and 60 meters and different data sizes of 14, 32 and 51 bytes, over the same channel. The packets with different SF’s and different data sizes were transmitted in a (pseudo) random way, one after the other, overlapping different SFs in the same channel and testing this way (theoretical) orthogonality among them. By fixing the bandwidth in 125 kHz, and testing different SFs we intend to increase the probability of cause packet loss by applying to our connection a combination of emitted power/short distance that leaves an interference power received, strong enough [2] for the effect. We validate our conclusions by analyzing ToA according with RSSI and different data sizes, the RSSI for different SFs and different data sizes and finally the packet loss through the PDR-Packet Delivery Ratio for a better understanding of the reliability of packet transmission in our link.

Chronic obstructive pulmonary disease (COPD) is a multifactorial lung inflammatory disease affecting 174 million people worldwide, with a recently reported increased incidence in female patients. Patients with COPD are especially vulnerable to the detrimental effects of environmental exposures, especially from air particulate and gaseous pollutants. Exposure to air pollution severely influences COPD outcomes, resulting in acute exacerbations, hospitalizations, and death. In the current study, we conducted a review of the literature addressing air pollution induced acute exacerbations of COPD (AECOPD) in order to determine whether air pollution affects COPD patients in a sex-specific manner. We found that while the majority of studies enrolled both male and female patients, only a few reported results disaggregated by sex. Most studies had a higher enrollment of male patients, only four compared AECOPD outcomes between sexes, and only one study identified sex differences in AECOPD, with females displaying higher rates. Overall, our analysis of the literature confirmed that air pollution exposure is a trigger for AECOPD hospitalizations and revealed a significant gap in our knowledge of sex-specific effects of air pollutants on COPD outcomes, highlighting the need for more studies considering sex as a biological variable.

Some evidence supports the influence of the implant macro-design and primary stability. Additionally, tactile perception can be used to assess implant stability when placing the implant. This research aimed to quantify the primary and secondary stability of three implant systems with two different macro geometries (cylindrical and conical) determined through the insertion torque and the implant stability quotient (ISQ) at the moment of implant placement as a function of implant-related factors (length, width, dental arch, and implant location in the arch), intraoperative factors (bone density determined subjectively by the clinician's tactile perception), and patient-related factors (age, gender and bone density determined objectively in the cone beam computed tomography (CBCT). Methods: 102 implants of three implant systems with two different macro geometries (conical and cylindrical) were placed in 53 patients. The insertion torque, the ISQ at the implant placement (ISQ0), and bone quality according to the clinician's tactile sensation were recorded on the day of the surgery. After a three-month healing period, the ISQ was re-evaluated (ISQ3). Results: Cylindrical implants exhibited significantly higher insertion torque and ISQ at the moment of the surgery and after three months than conical implants. Cylindrical implants also showed significantly lower indices of tactile evaluation of bone quality during the implant placement surgery. However, no differences were demonstrated in the bone density measured objectively in the CBCT. (4) Conclusions: The cylindrical implants achieved the highest values for primary stability (Ncm and ISQ) and secondary stability (ISQ after three months). Insertion torque was the variable that most influenced ISQ on the day of the surgery. Implant location (incisors-canines, bicuspids-molars) and the implant macro geometry were the variables that most influenced the secondary stability (ISQ at three months).

Congenital deafness is a major pediatric problem, affecting about 1.5-3 per 1000 newborns. The early treatment through cochlear implantation and auditory rehabilitation has been a historic milestone. Early diagnosis of congenital deafness is an essential requirement to obtain the best results, which is achieved through neonatal screening, a diagnostic practice that we began systematically at the Hospital Clínico in Valencia (Spain) 30 years ago.

We give three new authentication schemes without secrecy. The first two on finite fields and Galois rings, using Gray map for this link. The third construction is given on Galois rings. The main achievement in this work is to obtain optimal impersonation and substitution probabilities in the schemes. Additionally, in the first and second scheme, we simplify the source space and bring a better relationship between the size of the message space and the key space than the given in [8]. Finally, we provide a third scheme on Galois rings, which generalizes the scheme over finite fields constructed in [9].

Frontal incomes play an important role in human behavioral regulation and can be a determinant of eating behavior. The aim of this study was to analyse the frontal incomes in obese patients with and without Binge Eating Disorder (BED), compared to normoweight (NW) subjects and to analyse the effect of sex and binge disorder on quality of life, with age and BMI as covariates. A total of 114 participants comprised three different groups (obese with BED, obese without BED and NW) completed the Frontal Assessment Battery (FAB) and Impact of Weight on Quality of Life (IWQOL-lite). The results showed that obese patients, with and without BED, have poorer frontal functioning than NW persons. Obese patients with BED have lower performance in frontal income than obese patients without BED. Male participants have a higher perception of quality of life in all dimensions, with women showing lower values in self-esteem and sex life. Obese with BED show greater weaknesses in physical function. These results suggest that low frontal incomes and worse quality of life characterize obese patients, more evident in obese patients with BED.

In this study, a simple approach to solving the Riemann Hypothesis, one of the most prominent unsolved problems in the field of Number Theory in mathematics and one of the “Millenium Prize Problems”, is presented. The Riemann Hypothesis, a conjecture about distribution of prime numbers, has remained unsolved since it was first proposed by German mathematician, Bernhard Riemann in 1859. This paper introduces an analytic continuation of the Zeta Function as well as symmetric approach through integration by parts to address this hypothesis. The proposed solution is obtained through analytical continuation in the critical strip 0<Re(s)<1 to establish that Re(s)=1/2.

Security in IoT systems is extremely important, as an intrusion into an IoT device or network can affect not only our domestic lives, but also industrial assets, with the potential to cause enormous damage. We discuss IoT security issues as defined by the OWASP Foundation, focusing on network related aspects. After a brief description of SDN in general and OpenFlow in particular, we discuss how SDN technologies can greatly help in designing and deploying more secure IoT networks by enhancing the cryptographic capabilities of devices, isolating devices or networks, blocking access to unwanted services, redirecting traffic to deep inspection systems, monitoring packet flows and devices, etc. These capabilities can be implemented using open-source OpenFlow controllers such as Faucet.

Recent evidence indicates that the risk of being diagnosed with cancer in a tissue is strongly correlated (0.80) with the number of stem cell divisions accumulated by the tissue. Since cell division can generate random mutations during DNA replication, this correlation has been used to propose that cancer is largely caused by the accumulation of unavoidable mutations in driver genes. However, no correlation between the number of gene mutations and cancer risk across tissues has been reported. Because many somatic mutations in cancers originate prior to tumor initiation and the number of cell divisions occurring during tumor growth is similar among tissues, here I use whole genome sequencing information from 22,086 cancer samples and incidence data from the largest cancer registry in each continent to study the relationship between the number of gene mutations and the risk of cancer across 33 tissue types. Results show a weak positive correlation (mean = 0.14) between these two parameters in each of the five cancer registries. The correlation became stronger (mean = 0.50) when gender-related cancers were excluded. Results also show that 1,003 samples from 29 cancer types have zero mutations in genes. These data suggest that cancer etiology can be better explained by the accumulation of stem cell divisions than by the accumulation of gene mutations. Possible mechanisms by which the accumulation of cell divisions in stem cells increases the risk of cancer are discussed.

All cancer registries constantly show striking differences in cancer incidence by age and among tissues. For example, lung cancer is diagnosed hundreds of times more often at age 70 than at age 20, and this cancer in nonsmokers occurs thousands of times more frequently than heart cancer in smokers. An analysis of these differences using basic concepts in cell biology indicates that cancer is the end-result of the accumulation of cell divisions in stem cells. In other words, the main determinant of carcinogenesis is the number of cell divisions that the DNA of a stem cell has accumulated in any type of cell from the zygote. Cell division, process by which a cell copies and separates its cellular components to finally split into two cells, is necessary to produce the large number of cells required for living. However, cell division can lead to a variety of cancer-promoting errors, such as mutations occurring during DNA replication, chromosome aberrations arising during mitosis, errors in the distribution of cell-fate determinants between the daughter cells, and failures to restore physical interactions with other tissue components. Some of these errors are spontaneous, others are promoted by endogenous DNA damage occurring during quiescence, and others are influenced by pathological and environmental factors. The cell divisions required for carcinogenesis are primarily caused by multiple local and systemic physiological signals rather than by errors in the DNA of the cells. As carcinogenesis progresses, the accumulation of DNA errors promotes cell division and eventually triggers cell division under permissive extracellular environments. The accumulation of cell divisions in stem cells drives not only the accumulation of the DNA alterations required for carcinogenesis, but also the formation and growth of the abnormal cell populations that characterize the disease. This model of carcinogenesis provides a new framework for understanding the disease and has important implications for cancer prevention and therapy.

The southeast of Spain is one of the most arid and desertification-prone areas in continental Europe, with climate change contributing to this situation. Climatic conditions affect the availability of water in the plant structures of wild species, facilitating the onset and/or spread of forest fires and increasing aridity. The Region of Murcia, in southeastern Spain, has small forest stands of gall oak (Quercus faginea) with relict value. It is of interest to investigate the situation of these stands, allowing us to know about their distribution and their evolution in the face of climate change. For this purpose, previous dasometric, available from a specific stand, studies are considered to be contrasted with current data, individual trees were geolocated, and distribution maps of contrasting environmental conditions were created. In general, gall oak has been observed to be distributed up to 1200 m altitude, especially in shady areas and embedded valleys and north-northeast orientations. Importantly, there was a positive evolution of the vegetative development, with increments in the number of trees during the study period, despite some negative affections in specific areas due to climate change.

The extent of micro-phase separation in polyurethanes (PUs) depended on the molecular weight, the chemical nature and the structure of the polyol/soft segments. Balanced properties in PUs were obtained by using blends of polyols during synthesis. No previous studies have been devoted to understand the interactions between the soft segments that affect the properties of the PUs. In this study, different blends of two polyols of different nature (polyester – PE - and polycarbonate diol - CD) and similar molecular weight were prepared and their structural, thermal, surface, viscoelastic and self-adhesion properties were assessed. PE showed larger number of structural repeating units and higher number of polar groups than CD, but the carbonate-carbonate interactions in CD were stronger than the ester-ester interactions in PE. The blending of CD and PE imparted synergic structural properties, particularly in the ones containing less than 50 % PE, they were associated to the disrupt of carbonate-carbonate interactions in CD and the formation of new ester-carbonate and hydroxyl-carbonate interactions. Therefore, higher glass transition temperatures, a new diffraction peak at 2θ = 24°, one additional thermal degradation at 426-436 °C, and less steeper decline of the storage moduli to lower temperature were found in CD+PE blends with less than 50 wt.% PE. Furthermore, the different interactions between the polyol chains in the blends were also evidenced on their surface properties, and all CD+PE blends showed self-adhesion property which seemed related to the existence of ester-carbonate and carbonate-carbonate interactions.

Proteomics in respiratory allergic diseases has such a battery of techniques and programs that one would almost think that there is nothing impossible to find, invent or mold. All these resources that we document here, are involved in solving problems in allergic diseases, both diagnostic, prognostic, treatment and immunotherapy development. The main perspectives, according to this version, are in three strands and / or lockout immunological system: 1) In blocking the diapedesis of cells involved, 2) modifications and blocking of paratopes and epitopes being understood by modifications to antibodies, antagonism or blocking them and 3) blocking FcεR1 receptors to prevent specific IgEs from sticking to mast cells and basophils. These tools and targets in the allergic landscape are, in our view, the prospects in the field.

The soma, dendrites and axon of neurons may display calcium-dependent release of transmitters and peptides. Such release is named extrasynaptic for occurring in the absence of synaptic structures. This review describes cooperative actions of three calcium sources on somatic exocytosis. Emphasis is given to the release of serotonin by the classical serotonergic leech Retzius neuron, which has allowed detailed studies of each step between excitation and exoctytosis. Trains of action potentials induce transmembrane calcium entry through L-type channels. If the frequency of action potentials is above 5 Hz, summation of calcium transients upon individual action potentials increases the intracellular calcium concentration to activate calcium–induced calcium release. The amplified calcium wave activates motochondrial ATP synthesis that fuels the transport of vesicles to the plasma membrane. Serotonin that is released activates autoreceptors coupled to phospholipase C. Production of IP3 produces release of calcium that sustains the large-scale exocytosis. The swiss-clock workings of the release machinery for somatic exocytosis has a striking disadvantage. The essential calcium-releasing endoplasmic reticulum that lays between resting vesicles and the plasma membrane becomes an obstacle for the vesicle transport. Such architecture reduces drastically the thermodynamic efficiency of the vesicle transport and elevates its energy cost..

This research focuses on the customer orientation of insurance brokers, whose activity is regulated by the Law of 26/2006 of July 17 on the mediation of private insurances and reinsurances. The goal is to ascertain whether the intermediation inherent in the insurance broker’s activity, which implies a customer-oriented service, entails a positive behaviour that transcends the immediate environment, reaching society. This study presents a comparative analysis between the insurance brokerage society, characterised by providing a personalised customer service, and banks’ advisory services on insurance. To this end, we study the evolution of the total volume of business and new production, compared for a portfolio of insurance products. The results presented in this research suggest that the customer values the advisory service provided by the broker. However, for a particular business segment in standardised insurance products and products related to banking assets, customers are more likely to resort to the bank’s services. In addition, the results indicate that the commission percentages applied by the entities operating in the banking insurance channel exceed those perceived by the insurance broker. With all this, intermediation in the development of the insurer’s activity can entail an ethical and social behaviour that involves customer-orientation and, possibly, social service, which does not always benefit the insurer.

Camelina (Camelina sativa L.) is an oilseed with potential for use as a raw material in second-generation biofuels. Camelina has a seed yield of up to 2380 kg ha^-1 and contains around 45% fatty acids. Selection of a suitable site is critical for production optimization. The objective of this study was to determine Chilean agro-climatic suitability for establishing camelina as a productive alternative. Climate and soil requirements and geographical restraints were evaluated for the species, considering the climatological characteristics of its regions of origin, as well as regions where camelina is successfully grown in the rest of the world. The variables considered include factors (maximum temperatures of the warmest month, water deficits, and degree days) and limitations (altitude, geomorphology, and current land use), which permitted the evaluation of the national territory for a certain level of suitability. It was determined that 1.3% of the national territory (960,664 ha) has some degree of suitability for camelina adoption. Between the Biobío and Los Lagos regions, 49.0% of land (471,203 ha) is in the category of without thermic restrictions, with mild water restrictions, and mild soil restrictions or without information, which can be used for camelina production. The Los Ríos region had 21.4% surface area (321,176 ha) with some level of suitability for camelina, the most suitable region to establish this crop in Chile.

In the last decades we have experienced great social, cultural, and educational changes, spending more time performing tasks in near vision and less hours in outdoor activities, having more overexposure to digital screens, especially the youngest and increasingly from younger ages. It is common to see cases when performing tasks in near vision the posture or position of the head is not adequate, especially the youngest, being essential to have a correct posture of the head to avoid visual, muscular, or articular problems. We present a procedure to try to control the correct position of the head in real time when performing close-up activities. The aim is to detect the inclination of the head and to know if a bad position is adopted due to a visual problem or simply to inadequate visio-postural habits, warning us of the postural anomaly to correct it.

We developed an amorphous solid dispersion (ASD) of the poorly water-soluble molecule niclosamide that achieved more than a 2-fold increase in bioavailability. Notably, this niclosamide ASD formulation increased the apparent drug solubility about 60-fold relative to the crystalline material due to the generation of nanoparticles. Niclosamide is a weakly acidic drug, BCS class II, and a poor glass former with low bioavailability in vivo. Hot-melt extrusion is a high-throughput manufacturing method commonly used in the development of ASDs for increasing the apparent solubility and bioavailability of poorly water-soluble compounds. We utilized the polymer polyvinylpyrrolidone–vinyl acetate (PVP–VA) to manufacture niclosamide ASDs by extrusion. Samples were analyzed based on their microscopic and macroscopic behavior and their intermolecular interactions, using DSC, XRD, NMR, FTIR, and DLS. The niclosamide ASD generated nanoparticles with a mean particle size of about 100 nm in FaSSIF media. In a side-by-side diffusion test, these nanoparticles produced a 4-fold increase in niclosamide diffusion. We successfully manufactured amorphous extrudates of the poor glass former niclosamide that showed remarkable in vitro dissolution and diffusion performance. These in vitro tests were translated to a rat model that also showed an increase in oral bioavailability.

Textile and clothing is one of the most important industrial sectors, not only due to the significant number of jobs generated, but also because it addresses one of the people’s fundamental needs (clothing). It is, however, a sector with a huge environmental impact, all over the world, and also an important social impact, especially in developing countries. Sustainability in the Textile &amp; Clothing value chain is a known issue, concerning both environmental, and economical-social facets of sustainability. One way to improve sustainability in this sector is by measuring the environmental, economic and social impacts of value chain activities and, ultimately, computing an Environmental and Circular score for each batch of textile and clothing product, and an Economical and Social score for each involved firm, reflected in their products. The consumer will then have the opportunity and responsibility for selecting products with the least negative environmental, economical and social impact. This article presents the results of STVgoDigital project - PPS1, developed in Portugal with the aim of implementing the traceability of textile and clothing products, boosting sustainability in this sector, and preparing the ground for the implementation of the circular economy. More exactly, a blockchain-based textile and clothing value-chain traceability platform is presented, for tracing textile product lots and activities, along the value chain, classifying them with a score, which measures their environmental and social impact. The environmental, economic and social impact scores are based on a set of proposed indicators. The results are assessed through the presentation of a case study of a face towel (home textile) and a case study of a T-shirt (clothing).

"Industry 5.0” is the latest industrial revolution. A variety of cutting-edge technologies, including artificial intelligence, the Internet of Things (IoT), and others, come together to form it. This new era will bring about significant changes in the way businesses operate, allowing them to become more cost-effective, more efficient, and produce higher-quality goods and services. Because sen-sors are getting better, 5G networks are being put in place, and more industrial equipment and machinery are becoming available, the manufacturing sector is going through a significant period of transition right now. These newly scalable opportunities make it possible to use and spread blockchain architectures on the shop floor, which is made possible by the ever-decreasing costs associated with implementing blockchain technology. Even though modern production models make use of the cloud (both internal and external services), networks and systems can take ad-vantage of the cloud's relatively low cost, scalability, increased computational power, real-time communication, and data transfer capabilities to create much smarter and more autonomous systems. This paper presents the results of an investigation into how blockchain services for large-scale industry networks could benefit from increased levels of security, transparency, and efficiency. We discuss the ways in which decentralized networks that make use of protocols and meshes might make things better with these technologies, which are not going away anytime soon. We emphasize the significance of new design in regards to cybersecurity, data integrity, and storage by using straightforward examples that have the potential to lead to the excellence of distributed systems.

This article delves into the pro-cyclicality of Loan Loss Provisions (LLPs) and earnings management, along with equity management, in Portuguese banks against the backdrop of implementing the IFRS 9's Expected Credit Loss (ECL) model. It concentrates on how LLPs mirror economic cycles and financial management practices, providing valuable insights into the operational dynamics of the Portuguese banking sector, marked by distinct economic and regulatory challengesThe research examined a sample of five Portuguese commercial banks, chosen from a group of seventeen in the Portuguese Banking Association. Data spanning from 2013 to 2022 were manually gathered. A multiple linear regression model was employed to scrutinize the relationship between LLPs and variables indicative of economic cycles and the earnings and equity management. The methodology aligns with the approaches of Araújo et al. (2018), Beatty and Liao (2014), and Casta et al. (2019). The analysis indicates a pro-cyclicality in LLPs within the Portuguese context, with a positive response of LLPs to economic indicators like unemployment. Contrarily, the extent of earnings and equity management under the ECL model was less marked compared to the Incurred Credit Loss (ICL) model, suggesting the impact of more stringent regulatory measures. The research corroborates the pro-cyclicality of LLPs in Portuguese banks under the ECL framework, underscoring the necessity for ongoing monitoring and refinement of models for forecasting and recognizing credit losses. The findings point to an area for improvement in financial management practices, despite regulatory enhancements, to promote transparency and ensure financial stability.

Attention-deficit/hyperactivity disorder (ADHD) is a common neurodevelopmental disorder. Given the growing evidence of gut microbiota being involved in psychiatric (including neurodevelopmental) disorders, we aimed to identify differences in gut microbiota composition between participants with ADHD and controls and to investigate the role of the microbiota in inattention and hyperactivity/impulsivity. Fecal samples were collected from 107 participants (NADHD=42; Ncontrols=50; NsubthreholdADHD=15; range age: 13-29 years). The relative quantification of bacterial taxa was done using 16S ribosomal RNA gene amplicon sequencing. Beta-diversity revealed significant differences in bacterial composition between participants with ADHD and healthy controls, which was also significant for inattention, but showing a trend in case of hyperactivity/impulsivity only. Ten genera showed nominal differences (P < 0.05) between both groups, of which seven genera were tested for their association with ADHD symptom scores (adjusting for age, sex, body mass index, time delay between feces collection and symptoms assessment, medication use and family relatedness). Our results show that variation of a genus from the Ruminococcaceae family (Ruminococcaceae_UCG_004) is associated (after multiple testing correction) with inattention symptoms, and suggest a role of gut microbiota in ADHD pathophysiology.

Automated systems, regulated by algorithmic protocols and predefined set-points for feedback control, require the oversight and fine-tuning of skilled technicians. This necessity is particularly pronounced in automated greenhouses, where optimal environmental conditions depend on the specialized knowledge of dedicated technicians, emphasizing the need for expert involvement during installation and maintenance. To address these challenges, this study proposes the integration of data acquisition technologies using Internet of Things (IoT) protocols and optimization services via Reinforcement Learning (RL) methodologies. The proposed model was tested in an industrial production greenhouse for the cultivation of industrial hemp, applying adapted strategies to the crop, and was guided by an agronomic technician knowledgeable about the plant. The expertise of this technician was crucial in transferring the RL model to a real-world automated greenhouse equipped with IoT technology. The study concludes that the integration of IoT and RL technologies is effective, validating the model's ability to manage and optimize greenhouse operations efficiently and adapt to different types of crops. Moreover, this integration not only enhances operational efficiency but also reduces the need for constant human intervention, thereby minimizing labor costs and increasing scalability for larger agricultural enterprises. Furthermore, the RL-based control has demonstrated its ability to maintain selected temperatures and achieve energy savings compared to classical control methods.

Making sustainable business models, especially in manufacturing, is a key approach for organizations to adopt in order to create more sustainable processes. New technologies are needed to implement new policies that can minimize the economic, environmental, and social consequences of industrial activity. Sustainable maintenance is decisive to guarantee the availability, reliability, and safety of assets, surpassing traditional maintenance policies and embracing the principles of the circular economy. The main objective of Maintenance 4.0 is to increase the lifespan and availability of the equipment by preventing unplanned downtime, reducing planned shutdowns, and improving safety. This research focuses on the integration of advanced Industry 4.0 tools with conventional monitoring and control techniques in process industries. The article suggests that while complex neural networks might provide good predictions, simpler solutions can generalize well and have lower prediction errors because they can capture the underlying relationships between variables in a specific asset better. The combination of maintenance function, Industry 4.0 tools, and advanced statistical solutions to obtain sustainable processes can facilitate organizational change and aid decision-making in equipment management. These solutions seek to reduce interruptions and expenses through the unnecessary utilization of labor and spare parts. All these considerations improve communication and data processing, resulting in improved maintenance of a hydrogen compressor in the petrochemical industry.

Shock waves, as used in medicine, can induce cell permeabilization, genetically transforming filamentous fungi; however, little is known on the interaction of shock waves with the cell wall. Because of this, the selection of parameters has been empirical. We studied the influence of shock waves on the germination of Aspergillus niger, to understand their effect on the modulation of four genes related to the growth of conidia. Parameters were varied in the range reported in protocols for genetic transformation. Vials containing conidia in suspension were exposed to either 50, 100 or 200 single-pulse or tandem shock waves, with different peak pressures (approximately 42, 66 and 83 MPa). In the tandem mode, three delays were tested. To equalize the total energy, the number of tandem “events” was halved compared to the number of single-pulse shock waves. Our results demonstrate that shock waves do not generate severe cellular effects on the viability and germination of A. niger conidia. Nevertheless, increase in the aggressiveness of the treatment induced a modification in the four genes tested. Scanning electron microscopy revealed significant changes to the cell wall of the conidia. Under optimized conditions, shock waves could be used for several biotechnological applications, surpassing conventional techniques.

The fields of electronics and information technology have witnessed rapid development during the last decades, providing significant technical support to the field of biological sciences. Radio-Frequency Identification (RFID) technology has been used to automate the monitoring of animal location and behaviors in a wide range of vertebrate and invertebrate species, including social insects such as ants and honey bees (Apis mellifera L.) This technology relies on electromagnetic fields to identify and track transponders attached to objects automatically. Implementing new technologies to serve research purposes could be time-consuming and require technical expertise from entomologists and researchers. Herein, we present a detailed description on how to harness RFID technology to serve honey bee research effectively. We describe how to build and operate a 32-antenna RFID system used to monitor various honey bee behaviors such as foraging, robbing, queen and drone mating, which can be used in other social insects as well. Preliminary data related to queen nuptial flights were obtained using this unit and presented in this study. Virgin queens labeled with ~5mg transponders performed multiple (1-4) nuptial/orientation flights a day (9 am to 5 pm) ranging from 8 to 145 seconds each. Contrary to virgin queens, no hive exit was recorded for mated-queens. At full capacity, this unit can monitor up to 32 honey bee colonies concurrently and is self-sustained by a solar panel to work in remote areas. All materials, hardware and software needed to build and operate this unit are detailed in this study, offering researchers and beekeepers a practical solution and a comprehensive source of information enabling the implementation of RFID technology in their research perspective.

Particle size can pose a challenge to random embankment compaction control methods, where practical techniques have hardly been developed and procedural control is used instead. In order to develop new quality control procedures for slate random fill, the necessary fieldwork and laboratory tests were carried out. This involved the revision of certain methods such as the wheel-tracking or topographic settlement tests. More than six hundred in-situ density and moisture content measurements were carried out for this research. In addition, more three hundred topographic settlements and three hundred wheel-tracking carriage tests were performed. The quality control processes were completed with more than thirty plate bearing tests. Possible evidence of statistical correlations between compaction control tests were identified. An analysis of variance (ANOVA) was performed. When testing proved relationships between them, the replacement of one of them by the other was assessed by deduction. Finally, the study suggests new procedures for compaction quality control of random slate fill used in crown area.

The severity of forest fires derived from remote sensing data for research and management has become increasingly widespread in the last decade, where these data typically quantify the pre- and post-fire spectral change between satellite images on multi-spectral sensors. However, there is an active discussion about which of the main indices (dNBR, RdNBR or RBR) is the most adequate to estimate the severity of the fire, as well about the adjustment model used in the classification of severity levels. This study proposes and evaluates a new technique for mapping severity as an alternative to regression models, based on the use of the maximum likelihood estimation (MLE) automatic learning algorithm, from GeoCBI field data and spectral indices dNBR, RdNBR and RBR applied to Landsat TM, ETM+ Images, for two fires in central Spain. We compare the severity discrimination capability on dNBR, RdNBR and RBR, through a spectral separability index (M) and then evaluated the concordance of these metrics with field data based on GeoCBI measurements. Specifically, we evaluated the correspondence (R²) between each metric and the continuous measurement of fire severity (GeoCBI) and the general precision of the regression and MLE models, for the four categorized levels of severity (Unburned, Low, Moderate, and High). The results show that the RBR has more spectral separability (average between two fires M = 2.00) that the dNBR (M = 1.82) and the RdNBR (M=1.80), additionally the GeoCBI has a better adjustment with the RBR of (R² = 0.73), than the RdNBR (R² = 0.72), and dNBR (R² = 0.71). Finally, the overall classification accuracy achieved with the MLE (Kappa = 0.65) has a better result than regression models (Kappa = 0.58) and higher accuracy of individual classes.

The effect of individual and combined supplementation of FA and GPM on physiological variables, productive performance, and carcass characteristics of finishing pigs under heat stress conditions were investigated. Forty Yorkshire x Duroc pigs (80.23 kg) were individually housed and randomly distributed into 4 groups under a 2 x 2 factorial arrangement (n=10): Control (basal diet, BD); FA, BD + 25 mg FA; GPM, BD with 2.5% GPM; and MIX, BD with 25 mg FA and 2.5% GPM. Additives were supplemented for 31 days. The inclusion of FA or GPM did not modify rectal temperature and respiratory rate. An interaction effect (P &lt;0.05) was observed on FI, while average daily gain (ADG) and feed conversion (FC) were not affected by treatments (P &gt;0.05). The inclusion of FA improved hot and cold carcass weight and carcass yields, while the addition of GPM decreased the marbling (P &lt;0.05), and GPM tended to increase loin area (P &lt;0.10). GPM increased liver weight (p &lt;0.05). The addition of GPM and FA can improve some carcass characteristics under heat stress conditions. It is necessary to continue investigating different levels of inclusion of GPM and FA, to demonstrate their potential growth promoting effect in finishing pigs.

This study assesses the development of professional skills in university students using serious games (SG), from a sustainability perspective. The Sustainable Development Goals (SDGs) were set by the United Nations’ 2030 Agenda for Sustainable Development. Universities are strategic agents in the transformation process towards sustainability. This way, they should be committed to promoting such sustainable values in the students through curricular sustainability, implementing active methodologies and SG for that purpose. Transversal skills are essential for the development of future graduates. The objective of this study was to assess which professional skills should be developed through the SG called The Island, to improve the degree of student satisfaction with the incorporation of a sustainable curriculum. The data were obtained using a questionnaire, and then analysed using linear regression models, with their inference estimated through the goodness of fit and ANOVA. The first results indicated that the implementation of the SG promoted a strengthening of the students' sustainable curriculum through the development of those skills. It was concluded that the key to success in education for sustainable development is improving the development of strategic thinking, collaborative thinking, and self-awareness, in addition to encouraging systemic, critical, and problem-solving thinking.