Nonlinear loads, a crucial component of power systems grids, pose a challenge due to harmonics injection. Our research tackles this issue with a novel approach - a modified green plug / switched filter compensation scheme using fuzzy logic controllers. This innovative scheme, presented in the paper, utilizes dual action pulse width modulation to ensure switching functions from harmonic reduction and capacitive compensation for inrush nonlinear type AC loads.  The scheme's multi-loop regulations and online switching effectively handle dynamic type slow acting inrush, motorized and other rectifier type-nonlinear loads, enhancing power factor, power quality at source and load buses, and reducing total harmonic distortion at key source and sensitive nonlinear load buses. A simulation model in the MATLAB/SIMULINK software environment demonstrates the efficiency of the proposed FACTS technique. The results show that voltage, current, active power, reactive power, power factor regulation, and effective energy utilization are achievable with the designed FACTS-MFCC-SFC. The switched modulated AC green plug filter significantly improves power quality and enhances power factor in the case of inrush and nonlinear loads.

The information on the land use and soil conservation practice based on year 2006, 2010 and 2014, hence offering an opportunity to model the impacts of land use change on erosion, deposition and surface water runoff. Limitation in the use of hydrological models had been their inability to handle the large amount of input data that describe the heterogeneity of the natural system. In this study, a procedure that takes into account soil conservation practice based on the land use change, the response of soil erosion and sediment export from the George Town Conurbation catchment area, and average annual sediment yields were estimated for each grid cell of the watershed to identify the critical erosion areas of rural and urban planning proposes. Average annual sediment yield and data on a grid basis estimated using Universal Soil Loss Equation (USLE) and an emerging technology represented by Geographic Information System (GIS) used as a tool to produce a map for erosion rate. The changing of the land use from forest to agriculture and then to an urban area is a challenging task to research on land use demand for population, and environmental impact assessment is important for the planning of natural resources management, allowing research the modification of land use properly and implement more sustainable for long term management strategies. The challenge is to formulate strategies that would promote an integrated approach to the land use planning at an appropriate level as to address the issues that arose. Modelling for creating urban growth boundary for the George Town Conurbation must have to be controlled surface runoff and soil loss and sediment export from land use of the George Town Conurbation catchment.

The presence of premature termination codons (PTCs) in transcripts is dangerous for the cell as they encode potentially deleterious truncated proteins that can act with dominant-negative or gain-of-function effects. To avoid synthesis of these shortened polypeptides, several RNA surveillance systems can be activated to decrease the level of PTC-containing mRNAs. Nonsense-mediated mRNA decay (NMD) ensures an accelerated degradation of mRNAs harboring PTCs by using several key NMD factors such as up-frameshift (UPF) proteins. Another pathway called nonsense-associated altered splicing (NAS) upregulates transcripts that have skipped disturbing PTCs by alternative splicing. Therefore, these RNA quality control processes eliminate abnormal PTC-containing mRNAs from the cells by using positive and negative responses. In this review, we will describe the general mechanisms of NMD and NAS and their respective involvement in the decay of aberrant immunoglobulin and TCR transcripts in lymphoid cells.

Medicinal and aromatic plants are gaining more importance because of their potential application in food, pharmaceutical and fragrance industry. Medicinal and aromatic plants have been used in cosmetics, perfumery, pharmaceuticals and food flavoring since ancient times, because of the presence of essential oils and different components. Seeds are of immense economic and biological importance, and they contain high oil, protein and starch reserves. The seeds of medicinal and aromatic plants are stores of important and active secondary metabolites that have been economically and commercially beneficial and helpful for medicine and pharmacy. The seeds of fennel are highly nutritious, and the seeds contain different minerals such as calcium, magnesium, and potassium. The seeds are helpful in weight loss and cancer prevention. They can also improve digestive health, regulate blood pressure, improve skin appearance, and promotes lactation. The main chemical components of lavender are linalool, linalyl acetate, 1,8-cineole, β-ocimene, camphor and terpinen-4-ol. The lavender essential oil has anxiolytic, anti-inflammatory, antimicrobial, antioxidant and antinociceptive activities.The main components of thyme are p-cymene, γ-terpinene and thymol. Thyme can help to improve eyesight, and it has high anti-bacterial and anti-inflammatory activities. The main compounds of Echinacea species are chlorogenic acid, caftaric acid, cynarin, echinacoside and cichoric acid. The keyword searches for Fennel, Lavender, Thyme, Echinacea, Seed biology, Traditional medicinal science and seed anatomy were performed by using Web of Science, Scopus, PubMed and Google scholar. The aim of this article review is to survey the pharmacological and health benefits of seeds of important medicinal plants.

Background: Aflatoxins (AFs) as toxic compounds are widely spread. They are frequent contaminants of crops that are produced by fungi species. Corn is of crops that widely used in the corn dry milling process; a four-step procedure comprises grain handling and milling, liquefaction and saccharification, fermentation, and co-product recovery that produces ethanol and animal feed. However, it is possible that corn as a feed for dry milling process might be contaminated with AFs. Therefore, monitoring AFs in during widespread this process results having a better understanding of the fate of AFs. Methods: In this study, a sample of corn kernel was contaminated with a high level of AFs using Aspergillus parasiticus. Then, the corn flour comprising 23400.5 µg/kg of the total level of aflatoxins (AFT), was hydrolyzed by enzymes and acid for ethanol fermentation with Saccharomyces cerevisiae. Also, the level of AFs was monitored during ethanol fermentation process. Results: The results showed that AFs did not detect in the ethanol produced through fermentation and it was safe. Also, during the experiments, the AFT level reduced by 58.5 and 95.7% for the ethanol fermentation with simultaneous saccharification and fermentation and ethanol production with acidic hydrolysis, respectively. Conclusion: The results of this study showed that highly contaminated corn with AFs can be used for ethanol fermentation through dry milling process and the produced ethanol was safe.

The damage caused by global warming is rapidly increasing, and its adverse effects become more evident with each passing day. Although it is known that the use of alternative binder materials in concrete would decrease this negative effect, reluctance to new composites continues. Waste use plays a vital role in sustainability studies. In this study, pure cement paste was prepared and enriched with carbon fiber. This study investigated the wide range of volume fraction of carbon fiber in cement-based composites. Two different industrial wastes, marble dust, and bottom ash were chosen and mixed with cement and four different (0.3%, 0.75%, 1.5%, and 2.5%) carbon fiber volume fractions. Based on physical, mechanical, and durability tests at 7, 28, and 56-days of curing, the composites were resistant to sulfate and seawater attack. The 0.75% carbon fiber addition seems to be an optimum volume percentage beyond which both physical and mechanical properties were adversely affected. The composites with 0.75% carbon fiber have reached 48.4 MPa and 47.2 MPa at 56-days of curing for marble dust and bottom ash mixture groups, respectively.

The General equilibrium theory tries to show how and why all free markets tend toward equilibrium in the long run. However, what is meant by equilibrium in this paper is more from a thermodynamical point of view. In order to understand the actual situation, it is necessary to study open systems which are complex. In physics, such a behavior in a complex system can be explain by using Non Equilibrium Thermodynamics. A system is able to self-organize and sustain itself away from equilibrium. Economic systems may fluctuate around a particular point. To sustain it far from the equilibrium state, it needs to degrade more energy and materials. In this study, the energy consumption patterns of Sri Lanka and USA are discussed. The pattern concerning Sri Lanka is close to the model proposed here, whereas the energy consumption pattern of USA is more complicated due to external factors.

Tamm Plasmon Polariton (TPP) is a nanophotonic phenomenon that has attracted much attention due to its spatial strong field confinement, ease of mode excitation and polarization independence. TPP has applications in sensing, storage, lasing, perfect absorber, solar cell, nonlinear optics, and many others. In this work, we demonstrate a biosensing platform based on TPP resonant mode. Both theoretical analyses based on Transfer Matrix Method and experimental validation through nonspecific detection of liquids of different refractive indices and specific detection of SARS-CoV-2 nucleocapsid protein (N-protein) are presented. Results show that TPP biosensor has high sensitivity and good specificity. For N-protein detection, the sensitivity is 1.5 nm/(µg/ml) and the limit of detection can reach down to below 7 ng/ml with spectrometer of 0.01 nm resolution of wavelength shift. This work paves the way for design, optimization, fabrication, characterization, and performance analysis of TPP based biosensors

Knowledge about pharmacological benefits of different seeds is an important factor for cultivation and application of medicinal herbs and plants. The seeds of medicinal plants are stores of valuable and active secondary metabolites that have been commercially and economically beneficial and helpful for medicine and pharmacy. The major parameter of reproduction and preservation of plants are also seeds which have a functional role in the distribution and establishment of plant in different regions. Five important seeds which have tremendous medicinal and pharmacological benefits are anise, basil, borage, cilantro and chamomile. Anise seed is used as a spice, either whole or ground, and its essential oil and extract are also obtained from the seeds. Basil seeds have a long history of usage in Chinese and Ayurvedic medicine, which are the good source of minerals, high in fiber including pectin, rich is flavonoids and other polyphenols. Borage seed oil is used for skin disorders such as seborrheic dermatitis, atopic dermatitis, and neurodermatitis. Cilantro is an annual herb that is part of the Apiaceae family. The seeds are rich in iron, zinc, copper and essential minerals which can decrease bad cholesterol and improves good cholesterol in the body. Chamomile can be considered for treatment of insomnia, hemorrhoids, anxiety, diarrhea and may help with wound healing and skin irritation. The keyword searches for Anise, Seed, Basil, Borage, Cilantro, Chamomile, Seed biology, Traditional medicinal science and seed anatomy were performed by using Scopus, Web of Science, PubMed and Google scholar. The aim of this article review is to survey the pharmacological and health benefits of seeds of five important medicinal plants.

The objective of this study is to examine different types of bias present in assessment tools and techniques, identify and eliminate any forms of favoritism, and suggest effective approaches for advancing equity and objectivity in assessment procedures. The research utilizes a qualitative methodology, incorporating surveys and focus group discussions with educators and students to collect data. Thematic analysis is a method employed for the purpose of analyzing qualitative data. The results suggest that students hailing from diverse cultural backgrounds perceive partiality in the language and cultural context of evaluations, leading to diminished scores. According to academic professionals, standardized tests are subject to bias, and offering accommodations that cater to linguistic and cultural diversity may improve the academic achievement of students from diverse cultural backgrounds. The findings of this research are of great importance to professionals in the domains of education, policy development, and academia who seek to improve assessment practices and promote equitable educational opportunities for all learners.

A large number of studies have indicated that plant community modulate the yield, improve growth and promote development of host plants, and among them rhizosphere growth-promoting bacteria play an important role in increasing crop yield. Bacteria benefit from the plant nutrients provided by the roots, but plants can benefit from their rhizobacteria as well. Rhizobia are considered as the most important candidate for plant growth promotion in comparison with rhizobacteria due to their endophytic nature and nitrogen fixing ability. They can also provide auxins which play a notable function in plant growth and plant-microbe interactions. Bacillus spp., the sporulating Gram-positive bacteria, have important roles in plant growth promotion and induction of systemic resistance. Pseudomonas are Gram-negative aerobic chemoheterotroph and are usually found in the environment. Streptomyces are important groups of soil bacteria from the actinomycetes family. Most of them are efficient rhizosphere and rhizoplane colonizers, and they can also be endophytes colonizing inner tissues of host plants. The present review aims to present the most up-to-date findings and results regarding the effects of plant growth promoting bacteria on yield of different crops, especially sorghum. Furthermore, the mechanisms of the actions of different bacteria briefly illustrated, aiming to present future needs to be addressed in sustainable crop production. Plant growth promoting rhizobacteria inoculation with different plants or treating plants with microbe-to-plant signal constituents can be an effectual technique to stimulate crop growth. They are also active in protecting crops from phytopathogens and environmental stress, plant pathogens and they have positive roles in nutrient cycling.

The development in the field of ceramics has been increasing over the past several decades. Among all of the dental ceramics, zirconia ceramics show very good mechanical properties and a significant improvement in mechanical function. However, it is properly established that each step of the fabrication process of zirconia ceramics must be controlled to achieve the expected mechanical properties. These steps include the block constructing, sintering process, machining and surface processing. Recent advances have focused on zirconia ceramics in forming and sintering processes, mechanical properties, combining with various materials, and on surface processing. All these items provide conceptions about the formability and machinability of the zirconia. Until now, very excellent studies have been done to specify the evolution of microstructures, phase and mechanical properties of zirconia ceramics during the sintering process. However, more studies are required in this field. This paper aims to demonstrate general views and various studies in the field of zirconia ceramics. The properties, applications and tests performed and the recent developments in the field of zirconia bioceramics are discussed.

Chronic inflammation may have a detrimental impact on human health as it tends to result in cancer. In addition, it is often linked to different steps that participate in tumorigenesis, including cellular transformation, survival, promotion, invasion, proliferation, angiogenesis, and metastasis. Hence, inflammation predisposes cancer development and plays a vital role in promoting all tumorigenesis stages. Inflammation is caused by many factors, such as bacterial and viral infections, tobacco smoking, autoimmune diseases, obesity, asbestos exposure, and many others, increasing cancer risk. Moreover, cancer can be enhanced by mutations that proceed to cancer progression. Consequently, it leads to immunosuppression and provides a favorable background for tumor development. Although many studies address the question of relationships between inflammation and cancer development, little attention is paid to the link between inflammation and blood cancer. Therefore, the current study reviews the role of inflammation in cancer development, particularly in blood cancer. A meta-analysis research approach meets the research objective and answers the research question. The review results indicate that chronic inflammation directly relates to the development of many cancer types, blood cancer in particular.

Natural hazards such as earthquakes take place around the world and when combined with humans create natural disasters. Earthquakes, a form of natural hazard, have, in recent years, caused damage and destruction in many rural areas due to the lack of sustainability in political, economic, social, physical and operational criteria. Thus, to overcome the damage caused by earthquakes in rural areas, an assessment of sustainability status seems necessary to plan and strengthen in relation to the status of sustainability indicators. Data collection was performed through field methods and questionnaires. To test the hypothesis, T statistical methods, correlation method and F-test were performed using SPSS software (V22.0, IBM Corporation, Armonk, NY, USA). The results of the study showed that villages were at a low and undesirable level for all aspects, except social index in terms of sustainability. Comparisons showed that there was a significant mean difference among villages in terms of sustainability. The multi-criteria decision-making analysis has been considered and applied to a ranking of villages in terms of sustainability against the hazard of earthquakes. Finally, in order to improve the sustainability indicators of villages, some strategies have been presented.

Background: The uptake of COVID-19 booster vaccines has been significantly low. Therefore, it is questionable whether combining the COVID-19 booster vaccines with Influenza vaccines can increase the population's interest in taking such vaccines and manage the health pandemic effectively. Methodology: In this systematic review and meta-analysis, a synthesis of the findings and summary of a total of 30 research articles based on the topic, ‘combining influenza and COVID-19 booster vaccination strategy’ was undertaken. The research articles were identified from three databases, namely, PubMed, Cochran Library, and Google Scholar using specific keywords and inclusion criteria. However, research articles that were not peer-reviewed and not published in English were excluded from the systematic review and meta-analysis. The average risk ratio of the included articles was 0.78% based on a 95% CI. On the other hand, the heterogeneity between such studies was I² = 35%, while the statistical significance of their findings occurred at p < 0.05. The average p-value of the included research studies was p = 0.62, implying that the null hypothesis was not rejected in almost all the studies. Results: A synthesis of the chosen research articles revealed that when influenza and COVID-19 booster vaccines are combined, there is potential for an increase in the uptake of the latter, mainly because many populations have already been accustomed to taking influenza vaccines on an annual basis. Conclusions: In this way, through such findings, medical health experts can make informed decisions to increase the population's willingness to receive the COVID-19 booster vaccines.

Marine clay deposits are commonly found worldwide. Considering the cost of dumping and the related environmental concerns, an alternative solution involving the reuse of soils that have poor conditions is crucial. In this research, the authors examined the durability of marine deposited clays and compiled a corresponding database. The use of slag alone as a binder, at any percentage, increased the accumulated mass loss (ALM) up to 2%. However, the use of lime as the third binder seemed to accelerate the chemical reactions associated with the hydration of clay and cementitious material and to enhance the chemical stability, i.e., samples that included both lime and slag experienced the same ALM as samples treated with cement only. Scanning electron microscopy analysis confirmed the durability improvements of these clays. The proposed unconfined compressive strength and accumulated mass loss relationship yielded practical approximation for the fine- and coarse-grained soils blended with up to three binders until 60 days of curing.

A three-phase multilevel inverter (MLI) synthesized with 31-levels in the output voltage is used to provide ac supply to a three-phase, squirrel-cage induction motor. The gating angles required for thirty power switches in MLI are optimized by both Genetic Algorithm (GA) and Gray Wolf Op-timization (GWO). In the optimization technique, the optimal angles are determined by solving the trigonometric equations from the Fourier analysis for targeting minimum total harmonic distortion (THD) at the MLI output. Simulation model and experimental prototype are developed for performance analysis and validation. The results obtained demonstrate that the MLI is effec-tively able to produce 31-levels of three-phase ac output voltages with THD not exceeding 5% when loaded with a resistive load and a three-phase induction motor. The voltages and currents are measured and recorded for different loads and operating conditions, including the amount of energy consumed by the loads, as well as frequency analysis, which shows the absence of most of the triple harmonics that have a negative impact on the efficiency of the inverter.

Background of the Study: We investigated the link between hypertension and cancer since it has been suggested that hypertension may raise the long-term risk of cancer. Previous large observational cohort studies found that greater blood pressure (BP) was related to a higher risk of cancer. Mendelian randomization (MR) was utilized to produce less confounded blood pressure estimates (BP) on overall and site-specific malignancies. The study aims to draw conclusions on the relationship between high blood pressure and cancer. Methods: Studies on high blood pressure and various malignancies are inconclusive, except for renal cell carcinoma. However, given that most meta-analyses only contained a limited number of trials, some relative risks had small to moderate magnitudes, and several may have been impacted by residual confounding, careful interpretation is necessary. The study was conducted using the meta-analysis technique. Cochran's Q test and I2 test were used to assess statistical heterogeneity between studies in the current investigation for research involving two or more cause and outcome combinations. Results: Positive correlations were also reported between high blood pressure and esophageal adenocarcinoma, squamous cell carcinoma, liver, and squamous cell carcinoma. However, most studies lacked multivariable adjustments. Physical and numerical risk of cardiovascular disease is linked to bowel cancer but no other cancers. According to a meta-analysis, hypertensive persons could also be at increased danger of gastrointestinal and breast cancer. Most meta-analyses comprised several trials with moderate or mild hazard ratios.ConclusionDifferent types of cancers have been noted to be directly caused by hypertension. In addition, some treatments have also been associated with the side effects of cancer treatments to cause hypertension. Women facing hypertension have an increased risk of getting breast cancer. Although some cancers showed a real relationship with hypertension, others had no connection at all.

This study aims to examines three elements shape leadership in Leader-Member Exchange (LMX) theory as a relationship and process. LMX quality is important for the company, because it relates to employee behavior and attitudes, including improving employee performance. The research method applied literature review using description logic and systematics. In this article the theory will be observed specially the effect of LMX on employee performance and antecedents of LMX. The results of the study found that the effect of LMX quality on performance is determined by the characteristics of the task as antecedent LMX in the company.

The current work investigates how adding a battery of optimal capacity to a grid-connected photovoltaic (PV) system can improve its economic feasibility. Also, the effect of different parameters on the feasibility of the PV system was evaluated. The OBC was determined for different saving targets of the annual electricity consumption of the chosen building. For this aim, real electricity consumption data of a residential building in Landskrona, Sweden, was used as energy consumption profile. Solar World SW325XL, which is a monocrystalline solar panel, was selected as PV panels. The calculations were performed under the metrological and economic conditions of southern Sweden. Different working parameters (WP)were considered (prices of the battery, feed-in tariffs, and saving targets). The performed calculations show that the optimal battery capacity (OBC), in which the payback time (PBT) of the system is maximized, strongly depends on the WP. The proper selection of the battery can considerably increase the economic feasibility of the PV system in southern Sweden. However, in some cases, using battery can have a negative impact on the PBT of the system. The results show that the electricity price, the module price, the inverter price, and the inverter lifetime have the highest effect on the PBT.

Helicobacter Pylori (H. Pylori) is a common pathogen with high prevalence of infection in human populations. Diagnosis of H. Pylori infection is critical for its treatment, eradication, and prognosis. Biosensors have been demonstrated to be powerful for rapid onsite detection of pathogens, particularly for point-of-care test (POCT) scenarios. In this work, we propose a novel optical biosensor, based on nanomaterial porous silicon (PSi) and photonic surface state Tamm Plasmon Polariton (TPP), for detection of cytotoxin-associated antigen A (CagA) antigen of H. Pylori bacterium. We fabricated the PSi TPP biosensor, analysed its optical characteristics and demonstrated through experiments towards sensing of CagA antigen, that TPP biosensor has sensitivity of 100 pm/(ng/ml), limit of detection of 0.01 ng/ml, and specificity in terms of positive-to-negative ratio of more than six. From these performance factors, it can be concluded that TPP biosensor can serve as an effective tool for diagnosis of H. Pylori infection, either in analytical labs or in POCT applications.

Abstract: Background: Stigma in health can result in a broad range of vulnerabilities and risk for patients and healthcare providers. The media plays a role in people’s understanding of health and stigma is socially constructed through many communication channels including via media framing. Among health issues that were affected by stigma recently were the Monkeypox and Covid-19. Objectives: This research aims to examine how The Washington Post framed stigma around mon-keypox and COVID-19. Guided by the framing theory and stigma theory, online news coverage for monkeypox and COVID-19 were analyzed to understand the construction of social stigma through the media reporting. Methods: This research employed a qualitative content analysis to compare news framing in The Washington Post online news regarding monkeypox and COVID-19. Results: Based on endemic, reassurance, and sexual transmission frames, the The Washington Post predominantly defined Africa as the source of the disease, blames gay communities, and empha-sizes no need to worry about the spread of the monkeypox virus. For the COVID-19 coverage, The Washington Post described China as the source of the coronavirus and constructs the image of panic towards the spread of the virus. Conclusions: The shifts in stigma discourse essentially manifest racism, xenophobia, and sexism in public health. This research affirms that the media reinforces stigma phenomenon in health through framing and offers constructive suggestions for mitigating this issue.

A simple undirected graph $\Gamma=(V_\Gamma,E_\Gamma)$ admits an $H$-covering if every edge in $E_\Gamma$ belongs to at least one subgraph of $\Gamma$ that isomorphic to a graph $H$. For any graph $\Gamma$ admitting $H$-covering, a total Labelling $\beta: V_\Gamma \cup E_\Gamma \longrightarrow \{1,2,\dots,p\}$ is called an $H$-irregular total $p$-labelling of $\Gamma$ if every two different subgraphs $H_1$ and $H_2$ of $\Gamma$ isomorphic to $H$ have distinct weights where the weight $w_\beta(K)$ of subgraph $K$ of $\Gamma$ is defined as $w_f(K):=\displaystyle \sum_{v\in V_K} f(v) + \sum_{e\in E_K} f(e)$. The smallest number $p$ for which a graph $\Gamma$ admits an $H$-irregular total $p$-labelling is called the total $H$-irregularity strength of $\Gamma$ and is denoted by $ths(\Gamma)$. In this paper, we determine the total $H$-irregularity strength of edge comb product of two graphs.

Deep Learning (DL) has made significant advances in computer vision with the advent of Vision Transformers (ViT). Unlike Convolutional Neural Networks (CNNs), ViTs use self-attention to extract both local and global features from image data, and then use residual connections to feed these features directly into a fully networked multilayer perceptron head. In hospitals, hematologists prepare peripheral blood smears (PBSs) and read them under a medical microscope to detect abnormalities in blood counts such as leukemia. However, this task is time-consuming and prone to human error. This study investigates the transfer learning process of Google ViT and ImageNet CNNs to automate the reading of PBSs. The study used two online PBS datasets, PBC and BCCD, and transferred them into balanced datasets to investigate the influence of data amount and noise immunity on both neural networks. The PBC results show that Google ViT is an excellent DL neural solution for data scarcity. The BCCD results show that Google ViT is superior to ImageNet CNNs in dealing with unclean, noisy image data because it is able to extract both global and local features and use residual connections, despite the additional time and computational overhead.

OpenAI has managed to turn 100 million heads in two months towards their new Language model tool (LM) ChatGPT. The third generation Generative Pretrained Transformer (GPT-3) has the capacity to tackle simple to complex and sophisticated problems, while providing reasoning behind its generated answers. ChatGPT can be used to increase productivity and improve efficiency and face challenging problems. Programming mobile applications is a challenging task that requires professional software engineers, skills and abilities to be developed. The following paper takes a case study approach to assess how novice app developers can use ChatGPT to generate Java scripts that will be used in Android studio to create a functional application. The results after, many iterations and ongoing conversations with ChatGPT managed to create an application for the anticipated function. Important insights have been drawn from the case study that could set the ground for any novice user seeking to create applications using Java scripting and Android Studio.

A smart water quality monitoring system based on the Internet of Things (IoT) paradigm was designed to protect water resources from pollution in real-time. Long-range (LoRa) application of the low-power, wide-area networking (LPWAN) concept has become a phenomenon in IoT smart monitoring applications. This study proposes the implementation of a LoRa network in a water quality monitoring system-based IoT approach. The LoRa nodes were embedded with measuring sensors pH, turbidity, temperature, total dissolved solids (TDS), and dissolved oxygen (DO), in the designated water station. It operates at a transmission power of 14 dB and a bandwidth of 125 kHz. The network properties were tested with two different antenna gains of 2.1 dBi and 3 dBi with three different spread factors (SF) of 7, 9, and 12. The water stations were located at Sungai Pantai and Sungai Anak Air Batu, both rivers on the Universiti Malaya campus. Following a dashboard display and K-means analysis of the water quality data received by the LoRa gateway, it was determined that both rivers are Class II B rivers. The results from the evaluation of LoRa performance on the Received Strength Signal Indicator (RSSI), Signal Noise Ratio (SNR), loss packet, and path loss at best were -83 dBm, 7 dB, &lt; 0%, and 64.41 dB, respectively, with a minimum received sensitivity of -129.1 dBm. LoRa has demonstrated its efficiency in an urban environment for smart river monitoring purposes.

The purpose of this study is to analyse the drivers and outcomes of the brand love derived from consumption experiences in the automobile retail sector. We examine the effects of consumers’ perceptions of perceived service quality and the trust they feel towards a car dealership (cognition) on emotions and brand love (affection), and the effects of brand love on consumers´ behavioural intentions (conation). This research provides insights into customer brand love in the automobile industry.

Enhancing the management and monitoring of oil and gas processes demands developing precise predictive analytics techniques. Over the past two years, oil and its prediction have advanced significantly using conventional and modern Machine Learning techniques. Several review articles detail the developments in predictive maintenance and technical and non-technical aspects of influencing the uptake of big data. The absence of references for machine learning techniques impacts the effective optimization of predictive analytics in the oil and gas sector. This review paper offers readers thorough information on the latest machine learning methods utilized in this industry's predictive analytical modelling. The review covers forms of Machine Learning techniques used in predictive analytic modelling from 2021 to 2023 (91 articles). It provides an overview of the details of the papers that were reviewed, comprising of the model’s categories, the data's temporality, field, and name, the dataset's type, predictive analytics (classification or clustering or prediction), the models' input and output parameters, performance metrics, optimal model, and benefits and its drawbacks. Additionally, suggestions for future research directions are provided to raise the potential of the associated knowledge and increase the accuracy of oil and gas predictive analytics models.

The COVID-19 pandemic underscores the significance of vaccine hesitancy in shaping vaccination outcomes. Understanding the factors underpinning COVID-19 vaccination hesitancy is crucial for tailoring effective vaccination strategies. This cross-sectional study, conducted in three communities across the United States and Lebanon, employed surveys to assess respondents' knowledge, attitudes, and perceptions regarding COVID-19 infection and vaccination. Among the 7,196 participants, comprising 6,775 from the US and 422 from Lebanon, vaccine hesitancy rates were comparable at 12.2% and 12.8%, respectively. Notably, a substantial proportion of respondents harbored misconceptions, such as attributing the potential to alter DNA (86.4%) or track individuals (92.8%) to COVID-19 vaccines, and believing in the virus's artificial origins (81%). Primary determinants of hesitancy included perceptions that the vaccine poses greater risk than the infection itself (aOR = 8.7 and 9.4, respectively) and negative recommendations from healthcare providers (aOR = 6.5 and 5.4, respectively). Conversely, positive endorsements from healthcare providers were associated with reduced hesitancy (aOR = 0.02 and 0.4, respectively). Targeting healthcare providers to dispel misinformation and elucidate COVID-19 vaccine risks holds promise for enhancing vaccination uptake.

Cryo electron microscopy (cryo-EM) instrumentation allows obtaining 3D reconstruction of the structure of biomolecular complexes in vitro (purified complexes studied by single particle analysis) and in situ (complexes studied in cells by cryo electron tomography). Standard cryo-EM approaches allow high-resolution reconstruction of only a few conformational states of a molecular complex, as they rely on data classification into a given number of classes to increase the resolution of the reconstruction from a few, most populated classes and discard all other classes. Such discrete-classification approaches result in a partial picture of the full conformational variability of the complex, due to continuous conformational transitions with many, uncountable intermediate states. In this article, we present the software with user-friendly graphical interface for running two recently introduced methods, namely MDSPACE and MDTOMO, to obtain continuous conformational landscapes of biomolecules by analyzing in vitro and in situ cryo-EM data (single particle images and subtomograms) based on molecular dynamics simulations of an available atomic model of one of the conformations. The MDSPACE and MDTOMO software is part of the open-source ContinuousFlex package, which can be run as a plugin of the Scipion software package, broadly used in the cryo-EM field.

Significant changes have occurred at Arabian Gulf Coast of Saudi Arabia over the last three decades. The area of mangrove was reduced by about 55%. Thus the economic, social, and environmental value of mangroves must be assessed over short -to long-term scales and employ these assessments for the awareness rising at local communities. This study provides a preliminary assessment of the risks on mangrove vegetation; it will provide database to mitigate the tremendous pressures due to coastal development and urban activities. The effects of human development on the mangrove plant cover in Eastern Region of KSA were recognised, during 2013 to 2016. The mean variations of physio-chemical characteristics in water and sediment were recorded. With regard to water analyses including; nitrogen, phosphorus, TSS, TDS, BOD, and turbidity were evaluated. On the other hand, for sediment: TDS, nitrogen, phosphorus, sulphate and total organic carbon were assessed. Moreover, the growth parameters: plant height, and size index, of Avicennia marina were recorded and estimated. It is concluded that human impact and urban developments have exerted drastic effects on the coastal ecosystems and its environments.

We describe a machine learning (ML) approach to process the signals collected from Covid-19 optical-based detector. Multilayer Perceptron (MLP) and Support Vector Machine (SVM) were used to process both raw data and feature engineering data, and high performances for qualitative detection of the SARS-CoV-2 virus with concentration down to 1 TCID50/ml has been achieved. Valid detection experiments contain 486 negative and 108 positive samples; and control experiments, in which biosensors without antibody functionalization were used to detect SARS-CoV-2, contains 36 negative samples and 732 positive samples. Data distribution patterns of the valid and control detection dataset, based on T-distributed Stochastic Neighbor Embedding (t-SNE), was used to study the distinguishability between positive and negative samples, and explain the ML prediction performances. This work demonstrates that ML can be a generalized effective approach to process signals and dataset of biosensors dependent on resonant modes as biosensing mechanism.

In the United States, obesity is prevalent, and it could be described as a pandemic. Obesity is excessive fat accumulation, leading to a BMI ≥ 30 (Fruh, 2017). Surveys conducted by the CDC show that the obesity prevalence in the US is on the rise, as several obese people rose from 30.5% to 41.9% between 1999 and 2020 (Bryan et al., 2021). During the same time, several people suffering from severe obesity rose from 4.7% to 9.2% (Bryan et al., 2021). Additionally, childhood obesity is on the rise. Statistics indicate that between 2017-2020 over 19.7% of children and adolescents aged 2-19 years had obesity. During the same period, obesity prevalence in children aged 2-5 years, 6-11 years, and 12-19 years olds was 12.7%, 20.7%, and 22.2%, respectively (Bryan et al., 2021). With so many people suffering from obesity, the WHO declared it a public health crisis (WHO, 2020). The COVID-19 pandemic further exacerbated the prevalence of obesity in the US. According to the surveys, there was a 4.4% increase in obesity between 2019 to March 2020 due to lifestyle changes that were put on people during the COVID-19 pandemic (Akter et al., 2022). Many comorbidities are associated with obesity. Without adequate health interventions, millions of people could suffer severe health disorders like respiratory problems, type II diabetes, psychological issues, gastrointestinal disorders, and cardiovascular diseases. It is also essential to develop health interventions to mitigate obesity due to its strain on the healthcare system. Research shows that people suffering from obesity spend $2,505 more than people with average weight on healthcare (Cawley et al., 2021). Obesity has financial ramifications in every healthcare category: inpatient, outpatient, and prescription drugs (Cawley et al., 2021). One essential action toward the efforts to mitigate the soaring obesity rates is understanding the demographic inequities across populations and how they can be resolved.

Oncological patients need the proper doses of medications to facilitate their recovery. The two basic approaches used in dosing Monoclonal Antibodies (mAbs) are fixed-dose combination and variable dosing. In Fixed-Dose Combination Drugs (FDCs), two or more active components are combined in a single formulation at a predetermined dose. Variable dosage, which has long been the industry standard, is the polar opposite of this approach. The body changes over time; the Body Surface Area (BSA) in square meters is often used as a Measure (m2). This study uses a systematic review. Most mAbs used in oncology are predominantly given as cytotoxic anticancer drugs using body-size-based (variable) regimens. Despite the benefits of fixed-dose, variable dosing has become the industry standard, despite being criticized for ineffectiveness. While variable dosing has some advantages, the prevalent view is that continuous dosing has significant advantages based on the balance of probabilities. After assessing each alternative, including its benefits and drawbacks, history of use, and suitability in the current context, fixed dosing emerges as a viable option.

Extinction of natural resources builds up pressure on governments to invest in research to find more sustainable resources for construction sector. Earlier studies on mortar and concrete show that bottom ash and basalt fiber are independently alternative binder in the concrete sector. This study aims to use bottom ash and basalt fiber blends as alternative novel-based composites in pure cement paste. Strength and durability properties of two different percentages of bottom ash (40% and 50%) and three volume fractions of basalt fiber (0.3%, 0.75%, and 1.5%) were used at three curing periods (7, 28, and 56 days). In order to measure physical properties of the basalt-reinforced bottom ash cement paste composites flowability, dry unit weight, porosity and water absorption measurements at 7, 28, and 56 days of curing were performed. Furthermore, mechanical properties of composites determined by unconfined compressive strength and flexural strength tests. Finally, to assess the durability sulfate-resistance and seawater-resistance tests have been performed on composites at 28 and 56 days of curing. Results showed that addition of basalt fiber improves physical, mechanical and chemical stability properties of paste up to a limiting basalt fiber addition (0.3% volume fraction) where above an adverse effect have been monitored. It is clear that observed results can lead to development of sustainability strategies in the concrete industry by utilizing bottom ash and basalt fiber as an alternative binder.

Assessment of the trends of land cover and vegetation dynamics (VD) using remote sensing (RS) and indicators such as anthropogenic activities and the socio-demographic information is essential in order to make proper planning for sustainable management. This paper attempts to evaluate land cover change (LCC) and VD in Kebbi State, Nigeria using historical Landsat data from 1986-2016 by means of remote sensing. The Driver-Pressure-State-Impact-Response (DPSIR) framework was later employed using both primary and secondary data for a better understanding of the drivers, the state of the environmental condition, the causes as well as the impact of the change. The images were classified into five thematic land cover classes as Dense Vegetation, shrubs/built area, farmland, bare/grassland and water body by means of Maximum likelihood supervised classification technique in accordance with Anderson classification scheme level 1, with acceptable accuracy. Pre-classification and post-classification change detection (CD) methodologies were executed using Normalized difference vegetation index (NDVI) and Image differencing respectively. The study illustrates a steady decline in dense vegetation and shrubs/build areas while farmland and bare/grassland increases, however, water bodies remain unchanged. The DPSIR pin-point that the major drivers of change in the study area have been the pressing need for farming land as the population grows and socioeconomic demands including fuelwood consumption and endemic poverty. Expansion of Farming land, fuelwood consumption and the need for construction materials are identified as the main key elements exerting pressure for the change. The state of the condition indicates a steady decline in dense vegetation and shrubs areas while farmland and bare/grassland are increasing significantly. The impacts include land degradation, the decline in the provision ecosystem goods and services, biodiversity loss through loss of habitats. The study, however, noted that many international and national policies in response to land degradation are channelled toward land restoration and remediating of the environment, through afforestation programs and improving the livelihood of the rural people through providing alternative income sources since they depend heavily on land for sustenance. However, the state governments, communities and individual commonly organized annual tree planting campaign with the main purpose of environmental protection.

In recent years, extensive research has been conducted on the IoT, one of its challenges has been the field security and penetration in these networks. security solutions it Require more planning and awareness to ensure system security and privacy protection.it has also been shown that adjusting the weights of neural networks can help improve the accuracy of detection to what extent. the challenge in the attack detection field is to increase the accuracy of attack detection by machine learning methods, in this paper, a new method is presented to adjust weights of the random neural network for attack detection. Evaluations of the proposed method show that compared to random neural network methods, nearest neighbor, and support vector machine, the accuracy of attack detection improves up to 99.49 percent, and the random neural network method has been able to improve by 99.01 percent, placing the best methods together in these experiments in the form of a multi-learning model showed that the results also had an increase in accuracy up to 99.56 percent, while the training time in the proposed model is less compared to the random neural network method.

In the upper charged layers of the atmosphere, the plasma is very rarefied. The collisions between its molecules are almost non-existent, and the driving forces behind them are the Lorentz forces resulting from the electric and magnetic fields. For this reason, we are interested in studying the behavior of non-collision plasmas because of its essential applications, such as the movement of satellites in the charged atmosphere. In this paper, the flow problem of collisionless gaseous plasma is examined. For that propose, we solve the unsteady Vlasov-Maxwell system of non-linear partial differential equations analytically. Methods of moments and traveling wave parameters are used to acquire an exact solution. Specific macroscopic properties of collisionless gaseous plasma are calculated along with electrical and magnetic fields. Further, thermodynamic estimation, such as entropy and entropy production, is presented. Those calculations allow us to measure the consistency with the laws of non-equilibrium thermodynamics. Relations between internal energy modification participations are predicted using Gibbs' equation for collisionless plasma. The modification effect of internal energies due to electro-magnetic fields is found to be small compared with the internal energy change due to the effect of entropy. That is because these fields are self-induced by plasma particles due to the sudden movement of the rigid plane plate. The results are accomplished according to the typical argon gaseous plasma model. Three-dimensional diagrams showing the measured variables are drawn to investigate and discuss their behavior. The problem has many commercial applications for the movement of objects in the charged atmosphere.

The year 2022 was characterized by several major events that impacted the business world in Indonesia and even globally after the COVID-19 pandemic devastated all business sectors in Indonesia and the world. The current business environment is experiencing accelerating turbulence characterized by increasing intensity of business competition, rapid changes in the market, and industrial connections climate. The industrial connection climate of an institution can be measured by the pattern of relationships that occur between workers and management. Industrial connections are fundamental to the sustainability of an organization and are understood as an important factor in influencing institutional performance. This research aims to look at the impact of the existence of industrial connections instruments, turbulence in the business environment on the industrial connections climate. Besides, how the industrial connections climate relates to firm performance. The research design is an inferential quantitative, using sampling and snowball sampling methods with total sample are 406. The data collected were analyzed using Structural Equation Model using LISREL version 8.70. This research used a survey to build an SEM model that tested the effect of organizational turbulence and industrial connections instruments on organizational climate directly, and tested mediation on organizational performance. All related indicators have outer loading more than 0.5 and T-value more than 1.96. Therefore, the conclusion is that all measurements are valid. Composite Reliability (CR) and VE for all indicators are >0.7 and >0.5 respectively. This research shows that industrial assosiation climate has a positive effect on business turbulence and industrial connections instruments. However, industrial connections instruments show a greater impact on the assosiation climate. This is because industrial connections instruments are the media used in the implementation of industrial connections in organizations. This research also confirms that industrial assosiation climate is positively related to organizational performance. The result of the indirect influence (IE) of 0.20 with t value is 8.47 means that the climate of Industrial connections is able to mediate the influence of Industrial connections Facilities on Organizational Performance.

Conditional Privacy Preserving Authentication (CPPA) schemes are an effective way of securing communications in Vehicular Adhoc Networks (VANETs), as well as ensuring user privacy and accountability. Cryptanalysis plays a crucial role in pointing out the vulnerabilities in existing schemes to enable the development of more resilient ones. In 2019, Zhang proposed a CPPA scheme for VANET security (PA-CRT), based on identity batch verification (IBV) and Chinese remainder theorem (CRT). In 2023, this scheme was crypt-analyzed by Tao. In this paper we provide our own crypt analysis of Zhang’s scheme and propose counter measures to mitigate Tao’s attacks. Furthermore, in 2021, Xiong proposed a Certificateless Aggregate Signature (CLAS) scheme which was cryptanalyzed by Shim in 2023. Xiong subsequently proposed a modified CLAS scheme which is also cryptanalyzed in this paper.

This study is aimed to explore the environmental risk posed by the unsustainable mining activities in Mulawarman village, East Kalimantan, and articulate the disproportionate impact from the perspective of environmental justice on how mining regulations affect the lives of a vulnerable community. A qualitative comparative analysis based on the legislation and administrative rules on coal mining, and a case study of Mulawarman village were adopted. The information was framed based (participatory) observation, and in-depth interview, and purposively conducted to six selected respondents. The result shows how the laws and regulations disadvantage the community and expose them to unequal treatment. The adverse effects of mining activities change the socio-environmental dynamics in this village. Being the breadbasket in 1997, Mulawarman villagers experience the loss of food self-sufficiency, and turn to the government and mining company for social welfare, and clean water. Also, inconsistent and incomplete regulations pertaining to mining, favor to serve the business interests before the environment and the local community. This results in severe encroachment upon community rights and leads to long-term conflicts between mining companies and local communities, and has weakened the capacity of local authorities to help the affected community to recover their rights.

The Imbalance Cost Pass-Through (ICPT) is a flexible component of the Incentive Regulation (IBR) that empowers power producers to adjust tariffs in response to variable fuel prices, thereby enhancing the economic resilience of electricity generation. However, the cost of electricity generation is significantly influenced by the volatility of commodity prices, including coal, gas and LNG. In Malaysia, the Energy Commission has conducted biannual reviews of fuel and other generation costs. Any cost savings or increases identified during these reviews will be passed on to customers in the form of rebates or surcharges. Due to that reason, this study proposes ICPT price forecasting for the electricity market in Peninsular Malaysia. The study aims to construct an ICPT-related baseline model for the peninsular generation data by employing three forecasting methods. The forecasting performance is analysed by a Mean Absolute Percentage Error (MAPE). In findings, the ARIMA method is one of the most accurate forecasting methods for fuel prices compared to the Moving Average (MA) and LSSVM methods. The observed price differences between the ARIMA and LSSVM models for ICPT are minimal. The ICPT price for July-December 2022 and January-June 2023 is MYR 0.21/ kWh for ARIMA and MYR 0.18/kWh for LSSVM, which are close to the actual TNB’s ICPT tariff. As for the forecasting, the ICPT price is expected to drop for the next announcement. The findings of this study may contribute to a positive impact on the sustainability of the energy sector in Malaysia.

In this paper, we redefine the boundaries of blood cell classification, expanding from 5 to 11 distinct blood cell types using the challenging 11-class PBC dataset. This shift enables a deeper understanding of blood cell diversity, overcoming previous limitations in medical image analysis. Our approach combines state-of-the-art deep learning techniques, including pre-trained ConvNets, ViTb16 models, and custom CNN architectures. We employ transfer learning, fine-tuning, and ensemble strategies, such as CBAM and Averaging ensembles, to achieve unprecedented accuracy and interpretability. Our fully fine-tuned EfficientNetV2 B0 model sets a new standard, with a macro-average precision, recall, and F1-score of 91%, 90%, and 90%, respectively, and an average accuracy of 93%. This breakthrough underscores the transformative potential of 11-class blood cell classification for more precise medical diagnoses. Moreover, our groundbreaking "Naturalize" augmentation technique produces remarkable results. The 2K-PBC dataset generated with "Naturalize" boasts a macro-average precision, recall, and F1-score of 97%, along with an average accuracy of 96% when leveraging the fully fine-tuned EfficientNetV2 B0 model. This innovation not only elevates classification performance but also addresses data scarcity and bias in medical deep learning. Our research marks a paradigm shift in blood cell classification, enabling more nuanced and insightful medical analyses. The "Naturalize" technique’s impact extends beyond blood cell classification, emphasizing the vital role of diverse and comprehensive datasets in advancing healthcare applications through deep learning.

Heart failure (HF) diagnosis, phenotyping, prognosis, and treatment decisions are all based on the left ventricular ejection fraction (EF). Heart failure with mid-range EF (HFmrEF) is a third EF category for heart failure with an EF between 40 and 49 percent. Comparatively, heart failure with preserved EF or reduced EF has been largely unexplored. 10–25% of patients with HF have HFmrEF. Although HFmrEF has an intermediate clinical profile, it is more similar to HF with reduced EF, particularly because these patients have a high incidence of ischaemic heart disease. Heart failure with preserved EF has a lower risk of cardiovascular events than heart failure with reduced EF, which is milder. HFmrEF and HF with preserved EF patients have a similar or higher risk of non-cardiovascular adverse events than patients with HF with reduced EF. There is still a great deal of mystery surrounding HFmrEF. The purpose of this review is to describe the major pathophysiology of HFmrEF and its similarities and differences with the other two types of EF. It is the purpose of this paper to present a comprehensive overview of the currently available evidence in support of the pathophysiology of patients with HFmrEF. Further investigation of the pathophysiology, treatment, and prognosis of this condition will be needed in the future in order to better understand it.

Hyperlipidemia is the fat particles excess in the serum. Hyperlipidemia increases the mortality rate that occurs with other metabolic disorders. Hyperlipidemia is classified into familial and acquired subgroups. Moreover, Hyperlipidemia etiology is based on environmental or genetic factors. For instance, abnormal HMG-CoA regulation down-regulates ubiquitin ligase and targets variable oxidative stress-related condition proteins. There has been proven reactive oxygen species (ROS) overshoot happens during hyperlipidemia occurrence. OS, directly and indirectly, regulates molecular cascades within the cell and leads to gene expression alteration. At this molecular juncture, AMPK is affected by ROS. AMPK is a serine-threonine kinase and a critical energy balance. Low energy conditions result in AMPK activation due to the down-regulation of protein and lipid synthesis. Furthermore, ER stress and activated unfolded protein proteasomal response and autophagy are AMPK mediated. Polyphenols are widespread dietary plant-based compounds that regulate gene expression and signal conduction. Through the hyperlipidemic state, FFAs releasing indirectly connect to AMPK/NF-κB pathway then polyphenols target them. AMPK, during this FFA exposure, down-regulates de novo lipid molecules generation. Likewise, if AMPK/mTOR pathway failure is prolonged, the hyperlipidemic state may be explicit, activated by natural herbal mediators, e.g., polyphenols. Polyphenols activate the AMPK signaling pathway and influence lipid metabolism. Polyphenol-mediated AMPK activation results in lipogenesis inhibition and lipophagy. Cholesterol efflux mediated polyphenols lipid-lowering effects, accessing LXR pathway. All these clues persist on direct or indirect AMPK-related polyphenolic anti-hyperlipidemic effects.

Smoking have been linked to male infertility by affecting the sperm epigenome and genome. In this study, we aimed to determine possible changes in the transcript levels of the PTPRN2, PGAM5, and TYRO3 genes in heavy smokers compared with non-smokers; and to investigate their association with fundamental sperm parameters. One hundred eighteen sperm samples (63 heavy-smokers (G1) and 55 non-smokers (G2) were included in this study. Semen analysis was performed according to WHO guidelines. After total RNA extraction, RT-PCR was used to quantify the transcript levels of studied genes. In G1 a significant decrease in standard semen parameters in comparison to non-smokers has been shown (p&lt;0.05). Moreover, PGAM5 and PTPRN2 were differentially expressed (P≤0.03 and P≤0.01, respectively), and downregulated in spermatozoa of G1 compared to G2. In contrast, no difference was observed for TYRO3 (p≤0.3). In G1, mRNA expression level of studied genes correlated negatively with motility, sperm count, normal form, vitality, and sperm membrane integrity (p&lt;0.05). Therefore, smoking may affect gene expression and male fertility by altering DNA methylation patterns in genes associated with fertility and sperm quality, including PGAM5, PTPRN2, and TYRO3.

The COVID-19 pandemic creates anxiety among hospitalised SARS-CoV-2 patients. Therefore, this study aims to determine the prevalence of anxiety and its associated factors among stable inpatient COVID-19 patients in Malaysia. A cross-sectional study was conducted using a web-based online survey involving 401 patients from Malaysia's leading COVID-19 hospitals from 15th April until 30th June 2020 who were chosen using quota sampling. General Anxiety Disorders 7 items (GAD-7), Coping Orientation to Problems Experienced Inventory (Brief-COPE) and Socio-demographic profile questionnaire were used. Descriptive analysis and multiple logistic regression were performed using SPSS v23 to determine the prevalence of anxiety and its associated factors. The results showed that prevalence of anxiety was 7.0%. Multiple logistic regression analysis revealed that female (p < 0.05), fear of infection (p < 0.05), lack of information (p < 0.05), maladaptive coping mechanism of behavioural disengagement (p < 0.001) and self-blame (p < 0.001) were significantly associated with anxiety. Whereas adaptive coping mechanisms via instrumental support (p < 0.001) was a significant protective predictor of anxiety. COVID-19 infection has had a significant influence on the mental health of patients. Findings in our study provides baseline findings on prevalence of anxiety among stabilized COVID-19 inpatient in Malaysia. Despite the relative low prevalence, the data has the potential to improve the present mental health monitoring system and the deployment of suitable treatments in dealing with similar circumstances

Increasing the quality factor (Q) of an optical resonator device has been a research focus to be utilized in various applications. Higher Q-factor means light is confined in a longer time which will produce a shaper peak and higher transmission. In this paper, we introduce a novel technique to increase further the Q-factor of a one-dimensional photonic crystal (1D PhC) cavity device by using an end loop-mirror (ELM). The technique utilizes and recycles the light transmission from the conventional 1D PhC cavity design. The design has been proved to work by using the 2.5D FDTD simulation with Lumerical FDTD and MODE softwares. By using the ELM technique, the Q- factor of a 1D PhC design has been shown to have increased up to 79.53 % from the initial Q value without the ELM. This novel design technique can be combined with any high Q-factor and very high Q-factor designs to increase more the Q-factor value of a photonic crystal cavity devices or any other suitable optical resonator devices. The experimental result shows that the device is measurable by adding a Y-branch component to the one-port structure and able to get the high-Q result.

Mine waste rock and drainage pose lasting environmental, social, and economic threats to the mining industry, regulatory agencies, and society as a whole. Mine drainage can be alkaline, neutral, moderately or extremely acidic and contains significant levels of sulfate, dissolved iron, and frequently a variety of heavy metals and metalloids, such as cadmium, lead, arsenic, and selenium. In acid neutralization by carbonate and silicate minerals, a range of secondary minerals can form and possibly scavenge these potentially harmful elements. Apart from the extensively-studied microbial-facilitated sulfide oxidation, the diverse microbial communities present in mine rock and drainage may also participate in the formation, dissolution, and transformation of secondary minerals influencing the mobilization of these metals and metalloids. This article reviews major microbial-mediated geochemical processes occurring in mine rock piles that affect drainage chemistry, with a focus on the role of microorganisms in the formation, dissolution and transformation of secondary minerals. Understanding this is crucial for developing biologically-based measures to deal with contaminant release at the source, i.e., source control.

A flat-plate unglazed solar water heater (SWH) with polymer thermal absorber was developed and tested. Polymer thermal absorber as a viable alternative to metal thermal absorber that is found in most SWH systems. The performance of this polymer SWH system is measured based on inlet and outlet water temperature, water flowrate, ambient air temperature and solar irradiance. The polymer thermal absorbers are hollow Polyvinyl Chloride (PVC) pipes with 20mm external diameter and 3 mm thick, painted in black to enhance radiation absorption. The pipes are arranged in a rectangular spiral inward-outward opposing-flow (RSioof). The collector pipes are placed in a 1 m2 square enclosure with bottom insulation and reflective surface for better radiation capture. Water circulation is a closed loop with a 16-liter uninsulated storage tank, driven by a pump and controlled by valves to maintain a mass flow rate of 0.00031 to 0.00034 kg/s. The test was conducted under partially clouded sky from 9 am to 5 pm, with solar irradiance between 105 and 1003 W/m2 and 27-36oC ambient air temperature. The SHW produced outlet hot water at 65oC by mid-day and maintained the storage temperature at 63oC until the end of test duration. Photo-thermal energy conversion was recorded with 23% maximum value. Results indicate that a flat plate solar water heater with polymer thermal absorber in RSioof design can be an effective alternative to the metal thermal absorber solar water heater and can be further optimized with glazing and tube sizing.

The research analysed the publications metric of literature regarding the impact of socially responsible investing (SRI) and environmental, social, and governance (ESG) on portfolio and financial performance. The study aimed to determine the latest trends, key themes, authors, and influential journals. Data from the SCOPUS database was used in this study. A total of 1377 research articles from academic journals related to this topic and published from 2013 to 2022, they data was cleaned to remove duplicate, and documents that do not meet the criteria of this study. For this bibliometric analysis, a total of 260 articles were chosen in order to summarise the collective knowledge and emerging patterns in ESG, SRI, ethical, and impact investing, a bibliometric analysis was employed. The thematic map classified the ESG, SRI, and performance relationship themes into four categories of themes: niche themes, motor themes (corporate financial performance, corporate social performance, ESG, ESG factors, sustainability, performance, integrated reporting, gender diversity, and board size), emerging or declining themes (social responsibility, environmental performance, socially responsible investment, ethical investment, and SRI), and basic or transversal themes (financial performance, corporate social performance, ESG performance, environmental, social, and governance). Social responsible investing, engagement, and ESG, implies a position between niche themes and highly developed topic/emerging or decreasing theme, and covid, ROA, while, tobin’s Q, implies a position between highly developed topic/emerging or decreasing theme and basic theme. The findings contribute to the enhanced understanding of ESG, SRI, ethical, and impact investing, which are crucial for an efficient capital market in promoting sustainability and sustainable development. The study offers vital practical implications and future research directions.

A number of studies have investigated different crustacean food stuffs, feeding methods, 18 and feeding behavior, but little attention has been given to the interaction between these aspects in 19 crustaceans. The aim of the present review is to update knowledge, and examine challenges and 20 opportunities in the development of formulated diets, as pelleted feed, which is vital for developing 21 better quality of seed or broodstock in hatcheries, and adaptation of hatchery product to the aqua- 22 culture environment, and production systems.

Heart disease is a global health concern of paramount importance, causing a significant number of fatalities and disabilities. Precise and timely diagnosis of heart disease is pivotal in pre-venting adverse outcomes and improving patient well-being, thereby creating a growing demand for intelligent approaches to predict heart disease effectively. This paper introduces an Ensemble Heuristic-Metaheuristic Feature Fusion Learning (EHMFFL) algorithm for heart disease diagnosis. Within the EHMFFL algorithm, a diverse ensemble learning model is crafted, featuring different feature subsets for each heterogeneous base learner, including support vector machine, K-nearest neighbors, logistic regression, random forest, naive bayes, decision tree, and XGBoost. The primary objective is to identify the most pertinent features for each base learner, leveraging a combined heuristic-metaheuristic approach that integrates the heuristic knowledge of Pearson correlation coefficient with the metaheuristic-driven grey wolf optimizer. The second objective is to aggregate the decision outcomes of the various base learners through ensemble learning, aimed at constructing a robust prediction model. The performance of the EHMFFL algorithm is rigorously assessed using the Cleveland and Statlog datasets yielding remarkable results with an accuracy of 91.8% and 88.9%, respectively, surpassing state-of-the-art machine learning, ensemble learning, and feature selection techniques in heart disease diagnosis. These findings underscore the potential of the EHMFFL algorithm in enhancing diagnostic accuracy for heart disease and providing valuable support to clinicians in making more informed decisions regarding patient care.

Antibiotic resistance among bacterial pathogens is recognized as a major threat to human health worldwide. The emergence of multidrug-resistant bacteria can also be found in the community settings, apart from hospital environment, which indicates that reservoirs of antibiotic resistance genes do exist outside the hospital. The growth of antibiotic resistance is a consequence of bacterial adaptations in response to selective pressures. To survive in this hostile environment, bacteria develop defence mechanisms such as chemical modification of antibiotics, enzyme-catalysed antibiotic degradation, altered permeability, antibiotic efflux, mutation of target sites and biofilm formation, resulting in resistance to nearly all currently available antibiotics used in the clinical practice. The present review summarizes insights into the molecular mechanisms underlying the antibiotic resistance which is useful for planning strategies to combat antibiotic resistance and devise innovative therapeutic tools to fight against multidrug-resistant bacterial species.

The purpose of this article is to characterize the Caristi type mapping by the absolute derivative. The equivalences of the Caristi mapping with contraction mapping is discussed too. In addition, it was shown that the contraction mapping can be characterized by its absolute derivative.

Abnormalities in sperm nuclei and chromatin can interfere with normal fertilization, embryonic development, implantation, and pregnancy. We aimed in this study to determine the impact of H2BFWT gene variants in sperm DNA on ICSI outcomes in couples undergoing ART treatment. One hundred and nineteen partners were divided into pregnant (G1) and non-pregnant (G2) groups. After semen analysis, complete DNA was extracted from purified sperm samples. The sequence of the H2BFWT gene was amplified by PCR and then subjected to Sanger sequencing. The results showed that there are three mutations in this gene: rs7885967, rs553509 and rs578953. rs553509 and rs578953 showed significant differences in the distribution of alternative and reference alleles between G1 and G2 (P = 0.0004 and P = 0.0020, respectively). However, there was no association between these SNPs and the studied parameters. This study is the first to shed light on the connection between H2BFWT gene variants in sperm DNA and pregnancy after ICSI therapy. This is a pilot study, so further investigations about these gene variants at the transcriptional and translational levels, in a larger cohort of patients, are needed to determine its functional consequences and to understand the mechanism of how the pregnancy is affected by sperm DNA.

Citrus essential oils (EOs) have various bioactivities like antioxidants, with many applications. Antioxidant activities depend on the chemical compositions of the EOs, which are affected by climate, soil, and geographical region. Thus, investigations on chemical compositions and antioxidant activities of Citrus EOs in different countries are valuable. In this study, we distilled EOs from peels of Indonesian-grown Citrus, including C. nobilis, C. limon, C. aurantifolia, C. amblycarpa, and Citrus spp.Chemical compositions of EOs were analyzed using Gas Chromatography-Mass Spectrometer (GC-MS), whereas the antioxidant activities were determined by employing 2,2-diphenyl-2-picrylhydrazyl (DPPH) method. Furthermore, principal component analysis (PCA) was applied to elucidate the main contributing compounds for antioxidant activity. The results show that all EOs possess unique chemical characteristics, with limonene as the majority constituent. For antioxidant activities, C. limon and C. amblycarpa EOs are the two strongest, IC50 values below 7.00 μL/mL. PCA approach suggests that -terpinene mainly contributes to the high antioxidant activities of C. limon and C. amblycarpa. Moreover, o-cymene, thymol, p-cymene, and α-pharnesene may also be responsible for the antioxidant activity of C. limon EO. These results are valuable information for the applications of Citrus EOs as antioxidant sources.

The fluctuation of the conditions on Lake Limboto affects people's activities around the lake. They try to survive by facing the problem of the lake, which is shallowing and narrowing. Yet the lake is predicted will be disappeared in 2030. This means that the productivity of the lake also diminishes. This article aims to analyze how the communities around the lake respond to the evolution and shocking prediction toward the lake into their daily activities. This study uses an interdisciplinary approach by integrating some fields of study to understand and solve the problems. One of the approaches involves interviewing people around the lake. Nevertheless, the base of the study is socio-cultural studies, which uses also old texts and oral literature as the support of the study. The research needs the theory of cultural studies to look at the survival and resilience of the people of lake so that they form their special daily activity. The results of the study show that some people know that there is a prediction of disappearing of the lake, but they have not anticipated it, as if this problem is only a government affair. They still live at the lake bank, try to survive and to be resilience even in poor conditions.

In this article, we show the existence of fixed point for the derivative of interval-valued functions. Meanwhile, the fixed point inquiry will utilize the common fixed point methods under the condition of compatibility of the hybrid composite mappings in the sense of the Hausdorff metric. Some examples are given to support the usability of the result of this research .

After Frankland first synthesized organotin compounds for the first time in 1849, their broad range of applications, including in industry and agriculture, resulted in a substantial increase in demand for organotin (IV) compounds after the 1940s. Because of the broad range of coordination numbers and molecular geometry that could result in numerous features, the structural diversity of organotin (IV) compounds is of great interest. Organotin (IV) dithiocarbamate has recently received attention as a therapeutic agent among organotin (IV) compounds. The hybrid complex individual properties of organotin (IV) and the dithiocarbamate moieties form a synergy of action stimulating increased biological activity. Organotin (IV) components have been shown in cytotoxicity studies to play a crucial role in cytotoxicity. Ligands serve to target and react to molecules while preventing unwanted changes in biomolecules. Organotin (IV) dithiocarbamate compounds have also been discovered to exhibit a broad range of cellular, biochemical, and molecular effects, with their toxicity largely determined by their structure. This review discusses the potential cytotoxicity effect of organotin(IV) dithiocarbamate, as well as its synthesis, elemental and spectroscopy analysis.

Silicon-based photonic integrated circuit (PIC) is a research focus in producing high-density photonics. One of the potential applications of silicon PIC is the sensing and measurement system. In this work, we use the one-dimensional photonic crystal (1D-PhC) cavity design which and utilize it at the PIC level design. The 1D PhC design used as the compact model has the same characteristics as experimentally demonstrated in previous works. The compact model is made from the S-parameter extraction of the 1D-PhC device which is done by using Lumerical FDTD software. The PIC design integrates the 1D-PhC device as a sensing component with a PN-phase shifter (PN-PS) to function as a refractive index (RI) sensor calibration or tuning circuit. A custom design of PN-PS device is used by simulating and extracting the bias voltage-effective index (bias-Neff) data by using Lumerical DEVICE and MODE into the circuit simulator. The circuit-level simulation is done by using Lumerical Interconnect software. Finally, we show the GDSII layout design of the 1D-PhC based photonic sensor calibration circuit with an analysis of generic silicon PIC design rules. The designed PIC is applicable for the bio-sensing applications and photonic SOC component. This work also shows the promise of PIC design approach for further PIC development.

This study investigates the influence of the porous structure, on the density and the mechanical behaviour of new foam concretes incorporating hemp shives. A total of eight batches of foam concretes were manufactured and tested, made with a protein-based foam agent, containing cement, ground granulated blast furnace slag and Metakaolin as binder and hemp shives as natural aggregate. The effect of several parameters is studied, elaboration method (direct and preformed), amount of pozzolanic additions (0% and 30%) and incorporation of hemp shives (5 and 15 vol%) on the resulting physical properties, microstructure, porous structure and mechanical behaviour of the concretes. Hemp shives incorporation results in increased concrete porosity and air bubble radius, decreased uniformity and mechanical strength, and lower cohesion with the cement matrix compared to standard concretes.

The process of Thermal spray is effective for creating a metal matrix composite (MMC) by embedding zirconium diboride reinforcement into a molybdenum matrix. This allows for the combination of beneficial properties in a new composite, as both materials have a high The materials Mo and ZrB2 possess different characteristics. For example, Mo has a melting point of 2622 ◦C while ZrB2 has a higher melting point of 3246 ◦C. Additionally, Mo has a high thermal conductivity of 139 W/m◦C compared to ZrB2's thermal conductivity of 24 W/m◦C. However, both materials have good thermal shock resistance, and Mo has a low coefficient of thermal expansion of 5.35 µm/m◦C while ZrB2 has a coefficient of thermal expansion of 5.8 × 10−6 K−1., as well as the ability to maintain strength at elevated temperatures and stability in extreme environments. The study focused on creating Mo/Zrb2 composites using a thermal spray coating technique, varying the parameters of spraying distance, number of passes, and gas pressure, and testing the resulting castings to evaluate their hardness and Young's Modulus. The primary objective of the research was to use the Taguchi technique for identifying the optimal parameters for generating the highest Young's Modulus and hardness for the castings. The Taguchi method integrates experimental and analytical principles to identify the most significant parameter affecting the response, which can significantly enhance overall performance. The study found that the optimal parameters were a spraying distance of 20 cm, gas pressure of 6 bar, and the number of passes of 18. The Taguchi method accurately predicted the parameters that produced the highest properties for the composite coatings, which demonstrated good surface formation without hot cracks and fewer pores, with well-formed metallurgical bonding between the coating and the substrate.

SARS-CoV-2 was detected in China in December 2019. Myocardial injury is a crucial presentation of COVID-19, based on the association of ACE-2 and SARS-CoV-2. Down-regulating ACE-2 decreases the cardioprotective effects of angiotensin, leading to a higher TNF-α activation. TNF-α causes the inflammatory response in the myocardial damage as an apoptotic inducer. Moreover, as an inducer of necroptosis, TNF-α binds to a part of TNF receptor 1, which involves receptor-interacting protein 1 (RIP1) and causes cell death through RIP1 inhibition and NF-κB stimulation, which are also done through Tpl-2. Calcineurin controls the Tpl-2-driven NFAT stimulation. Bcl-2 or Bcl-X_L entirely blocks these pathways. Bcl-2 overexpression reduces FasL expression with a mechanism based on Bcl-2 inhibiting the NFAT. Moreover, the Fas/FasL system activates apoptosis in various cells. Bcl-XL stimulates Fas-related cell death. Additionally, TNF-α, as a part of inflammatory cytokine storms, indirectly interacts with NFAT/Bcl-2 through Tpl-2/NF-κB. Diversely, TNF-α and IL-1ẞ, the basis of inflammatory cytokine storms in COVID-19, can stimulate generating NO. Also, IL-2 is highly up-regulated in COVID-19 patients and stimulates NO generation in patients. TNF-α can provoke the generation of superoxides in neutrophils. A well-determined mechanism is the intracellular production of NO via calcium-calmodulin-dependent NO synthase (NOS). NO enhances NFAT’s calcium-dependent activity. Also, Intra/extracellular calcium exchange activates calcineurin and its related molecule, NFAT. Nitration provokes RIP1 necroptosis cascade, with respiratory complex I. Nitrites converse protection against ischemia-reperfusion injuries in the myocardium. Regulating this intrinsic molecular pathway can prevent the necroptosis of cardiomyocytes.

Neural-objective and image optimization approaches for drilling fluid rheology automation are crucial for drilling engineering optimization. A myriad of intelligent computational models are employed to predict and monitor the parameters of mud rheology and filter cake permeability posture using an artificial neural network feedforward (ANN-FF) function, a non-ANN-FF function, an image processing tool, and a model optimization tool. 498 datasets of synthetic-based mud (SBM) flat rheology from a drilling mud laboratory at Nazarbayev University were imported into a user-friendly MATLAB application using image processing and nftool. Apart from the Google TensorFlow Sequential API DNN architecture used, a Levenberg-Marquardt training algorithm with input sigmoid hidden neurons 10, 12, and 18 coupled with a linear output layer was also used to predict the SBM flow index. OBM and SBM filter cakes were processed for void spaces; however, a model study was extrapolated to maximize filtration volume Vf. The study’s findings show that the ANN-FF model employed for rheological property monitoring and prediction had higher steady and exponential levels of accuracy and a correlation coefficient of 0.96-0.99. More so, SBM and OBM image processing presented an area of void spaces of 1790M2 and 1739M2, respectively. The porosity and permeability postures of both SBM and OBM resulted in a significant void space capable of maximizing the flow index. In addition, the single-objective modelling based on a genetic algorithm did validate the experimental rheological data for flow index or filtration volume Vf optimization; the study resulted in the finding that the constrained physics-informed objective function hindered maximizing oil recovery and instead predicted possible formation damage. It is empirical to note that automating flow predictions with neural, objective, and image functions has presented an alternative novel method for non-programmers using MATLAB and Google Colabs that is capable of enhancing mud rheological parameters, drilling efficiency, and hydrocarbon recovery.

: Leveraging the sustainability of the power system market, researchers have developed various ML models for forecasting electricity demand. The LSSVM is well suited to handle complex non-linear power load series. However, the less optimal regularization parameter and the Gaussian kernel function in the LSSVM model have contributed to flawed forecasting accuracy and random generalization ability. Thus, these parameters of LSSVM need to be chosen appropriately using intelligent optimization algorithms. This study proposes a hybrid model based on the LSSVM optimized by the IBFOA for forecasting the daily electricity load in Peninsular Malaysia. The IBFOA for parameter optimization of LSSVM is introduced. The IBFOA based on the sine cosine equation is proposed to adjust the constant step size in the BFOA, which creates an imbalance between the exploration and exploitation during optimization. Finally, the load forecasting model based on LSSVM-IBFOA is constructed using MAPE as the objective function. Comparative analysis demonstrates the model, achieving the highest R2 (0.9880) and significantly reducing error metrics (MAPE, MAE, RMSE, MSE, NRMSE) compared to the baseline LSSVM (average reduction of 27.72% to 47.72%). Additionally, IBFOA exhibits faster convergence and higher accuracy compared to BFOA, highlighting the accuracy of LSSVM-IBFOA for short-term load forecasting.

Rice varieties such as Mahsuri Mutan and Basmati 370 are categorized as specialty rice with kernel elongation ratio exceeding 1.6 and 2.0, respectively. Ageing treatment in rice could affect the physical and chemical properties of rice such as grain size and shape, quality and taste of the cooked rice. The main objective of this study was to determine the effects of ageing treatment on the physicochemical properties of Mahsuri Mutan, Basmati 370 and MR219 rice varieties. The three rice varieties were subjected to heat treatment at 90ºC using the oven for 3 hours. After the heat treatment, the samples were cooled at room temperature (25ºC) for 1 hour. Physicochemical properties such as alkali digestion value, water uptake ratio (WUR), solids in cooking water (SCW), high kernel elongation (HKE) ratio and amylose contents were determined. Data collected on physicochemical traits and ageing vs non-ageing treatments were subjected to analysis of variance (ANOVA) using SAS software version 9.4. Phenotypic correlation coefficient indicated that there was a high positive correlation between HKE and water uptake ratio. The ageing treatment also showed significant difference in all the physicochemical traits of the varieties studied. Observation under electron microscope showed that the ageing samples had more cracks on the tissue structure compared to normal rice samples. The hexagon structure in Mahsuri Mutan gave more elongation effect on its kernel. The findings from this study could be useful to breeders in selection and development of new high kernel elongation rice variety.

.Various synthetic nematicides are currently used effectively in the control of plant parasitic nematodes. However, these nematicides have adverse effects on humans and the environment. Neem oil is eco-friendly alternatives to synthetic nematicides. The effectiveness of repeated neem oil application in suppressing the root-knot nematodes infestation in figs seedlings was therefore examined in this study, both in its natural form (10 ml/L) and in its nano-emulsion form (5 and 7 ml/L). The recorded reduction parameters of M. incognita were J2/250g soil, galls and egg masses / 5g roots of infected fig seedlings were measured at that time, and the effects of these natural additives were compared with the Fosthiazate (Krenkel 75%EC). The impact of such soil amendments on some typical plant parameters, the total microbial count of soil, and the overall enzymatic activity of the fig rhizosphere were also included. Obtained results revealed that the soil population density of root knot nematode suppressed by 80.3% , reduction of nematode egg masses (60.4%) due to the application of nano-emulsion of neem oil (at 7ml/L). Present work recommend the use of nano-emulsion of neem oil as one of the effective and eco-friendly means to reduce the root- knot nematode on fig .

Corn starch-based nanocomposite films usually have low moisture barrier properties. The addition of virgin coconut oil (VCO) as a hydrophobic component can improve the nanocomposite film's characteristics, especially the film's permeability and elongation properties. This study aimed to determine the role of VCO with various concentrations (0,3,5 wt%) on the physical, mechanical, and water vapor transmission characteristics of corn starch/NCC-based nanocomposite films. The results showed that the concentration of 3 wt% VCO was most effective in reducing the WVTR value of nanocomposite films with a value of 4.721 g/m2.h. While the value of tensile strength was 4.243 MPa, elongation 68.58%, modulus of elasticity 0.062 MPa, thickness 0.219 mm, lightness 98.77, and water solubility 40.51%. However, the addition of 5 wt% VCO was more effective in increasing the elongation properties of the film. The addition of VCO gave the appearance of a porous film surface and a finer structure was formed. The FTIR test on corn starch nanocomposite films with the addition of VCO did not show any new absorption peaks. The results of this study may provide opportunities for the development of nanocomposite films as biodegradable packaging in the future.

Starch is widely applied in various industrial sectors, including the food industry. Starch is used as a thickener, stabilizer, or emulsifier. However, arrowroot starch generally has weaknesses, such as unstable under heating and acidic conditions, which are generally applied to processing in the food industry. Modifications were applied to improve the characteristics of native arrowroot starch. In this study, arrowroot starch was modified by heat-moisture treatment (HMT), octenylsuccinylation (OSA), and dual modification between OSA and HMT in a different sequence, namely HMT followed by OSA, and OSA followed by HMT. This study aims to determine the effect of different modification methods on the physicochemical and functional properties of native arrowroot starch. The result shows that both single HMT and dual modification caused damage to native starch granules, such as the formation of cracks and roughness. Especially for single OSA treatment, there is no significant change in granule morphology after modification. All modification treatments did not change the crystalline type of starch but reduced the RC of native starch. Both single HMT and dual modifications (HMT-OSA, OSA-HMT) increased pasting temperature and setback, conversely decreasing the peak and breakdown viscosity of native starch. Whereas, single OSA has the opposite trend compared with the other modifications. HMT played a greater role in increasing the thermal stability and retrogradation ability of arrowroot starch. Both single modifications (HMT and OSA) increase the hardness and gumminess of native starch, conversely for dual modifications. HMT has a greater effect on color characteristics, where decreased the lightness and whiteness index of native arrowroot starch. Single OSA modification increased swelling volume higher than dual modification. Both single HMT and dual modifications increase water absorption capacity and decrease the oil absorption capacity of native arrowroot starch.

Purpose: We hypothesized that a recently introduced epibulbar micro-shunt (PRESERFLO, P) produces nycthemeral (24h) intraocular pressure (IOP) profiles different from ab-interno trabeculectomy (Trabectome, T). P is a flow restrictor that drains fluid into the sub-tenon space. In contrast, T increases conventional outflow, which is limited by episcleral venous pressure. Methods: In this prospective cohort, we analyzed 68 patients (34 P and 34 T) who presented for 24-h IOP monitoring 6 to 12 months after surgery. IOP and tonographic outflow facility were measured in the habitual position using a pneumatonometer. The IOP variation was considered the primary outcome measure. Glaucoma medications were also compared. Results: P had a higher baseline IOP than T (24.8±10.0 vs. 17.3±7.9 mmHg, p=0.001). Postoperatively, P and T had similar nycthemeral IOP profiles, but IOP in P was significantly lower than in T, except at 4 pm. P had a lower absolute IOP variation than T (5.8±2.6 vs. 7.1±2.7 mmHg, p=0.049). The relative IOP variation was similar in both (34.8±13.2 vs. 37.2±13.1, p=0.45) as was the tonographic outflow facility (0.35±0.23 vs. 0.26±0.18 µl/min/mmHg, p=0.097). Conclusion: Nycthemeral IOP profiles of P and T were similar, but P had lower IOPs and less variation than T. This could reflect how T, unlike P, is more impacted by habitual, positional factors, especially at night.

Fused deposition modeling (FDM) is widely applied in various fields due to its affordability and ease of use. However, it faces challenges such as achieving high surface quality, precise dimensional tolerance and overcoming anisotropic mechanical properties. This paper analyzes and compare the machinability of 3D printed PLA, PETG and carbon fiber reinforced PETG focusing on surface roughness and burr formation. A design of experiments (DoE) with a full factorial design was used, considering three factors: rotation speed, feed rate and depth of cut. Each factor had different levels: rotational speed at 3000, 5500 and 8000 rpm; feed rate at 400, 600 and 800 mm/min; and depth of cut at 0.2, 0.4, 0.6, and 0.8 mm. Machinability was evaluated by roughness and burr height using a profilometer for all the materials under the same milling conditions. To evaluate the statistical significance of the influence of various processing parameters on surface roughness and burr formation in 3D printed components made of three different materials PLA, PETG and carbon fiber reinforced PETG, an analysis of variance (ANOVA) test was conducted. This analysis investigated whether variations in rotational speed, feed rate and depth of cut resulted in measurable and significant differences in machinability results. Results showed that milling parameters significantly affect roughness and burr formation, with optimal conditions for minimizing any misalignment highlighting the trade-offs in parameter selection. These results provide insights into the post-processing of FDM-printed materials with milling, indicating the need for a balanced approach to parameter selection based on application-specific requirements.

This paper proposes a heuristic approach for managing complex construction projects. The tool incorporates with Primavera P6 EPPM and Synchro 4D, enabling proactively clash detection and resolution of spatial conflicts during concurrent tasks. Additionally, it performs resource verification for sufficient allocation before task initiation. This integrated approach facilitates the generation of conflict-free and feasible construction schedules. By adhering to project constraints and seamlessly integrating with existing industry tools, the proposed solution offers a comprehensive and robust approach for construction project management. This constitutes to our knowledge the first dynamic digital twin for the delivery of a complex project.

The Atlantic puffin is a medium-sized seabird with black and white plumage and orange feet. It is distributed mainly along the northern Atlantic Ocean and due, among other reasons, to human activities, it is in a threatened situation and classified as a vulnerable species according to the International Union of Conservation of Nature (IUCN). In this study, we used a total of 20 carcasses of juvenile Atlantic puffins to perform anatomical cross sections and magnetic resonance images. Thus, an adequate description of the head was made, providing valuable information that could be helpful as a diagnostic tool for veterinary clinicians, who increasingly treat these birds in zoos, rehabilitation centers and even in the wild.

The current revolution in communication and information technology is facilitating the Internet of Things (IoT) infrastructure. Wireless Sensor Networks (WSN) are a broad category of IoT applications. However, power management in WSN poses a significant challenge when the WSN is required to operate for a long duration without the presence of a consistent power source. In this paper, we develop a batteryless, ultra-low-power Wireless Sensor Transmission Unit (WSTx) depending on the solar-energy harvester and LoRa technology. We investigate the feasibility of harvesting ambient indoor light using polycrystalline photovoltaic (PV) cells with a maximum power of 1.4mW. The study provides comprehensive power management design details and a description of the anticipated challenges. The power consumption of the developed WSTx was 21.09µW during the sleep mode and 11.1mW during the operation mode. The harvesting system can harvest energy up to 1.2mW per second, where the harvested energy can power the WSTx for six hours with a maximum power efficiency of 85.714%.

The use of high strength to weight ratio laminated composites is emerging in marine industry and applications as a very efficient solution for improving productivity. Nevertheless, delamination between the layers is a limiting factor for the wider application of laminated composites, as it reduces the stiffness and strengths of the structure. Interleaving nanofibrous mats between layers of composite laminates has been proved to be an effective method for improving composites delamination resistance. This paper aims to characterize the effect of interleaved nanofiber on mode I interlaminar properties and failure mechanisms when subjected to static and fatigue loadings. For this purpose, virgin and nanomodified woven laminates were subjected to Double Cantilever Beam (DCB) specimens. Static and fatigue tests were performed and the tests were monitored by acoustic emission technique. The mechanical results showed a 130% increase of delamination toughness for nanomodified specimens in the static loadings and more crack growth resistance in the fatigue loading. The AE results revealed that different type of failure mechanisms was the cause of these improvements for the modified specimens compared with the virgin ones.

Over the centuries, honey is known for its superior usage in culinary, and for its rich nutrition and therapeutic values which are scientifically proven in the medical field. The chemical composition of honey varies depending on its botanical sources and environment. Therefore, the nutrition content in honey is highly likely to be affected by contaminants, such as heavy metals and pesticides. To ensure the quality of honey, parameters such as the heavy metal content should be within the safe range of total standard mineral and trace elements as defined by the International Food Standard (Codex Alimentarius), and pesticides should not be present at all. The high concentration of heavy metal and pesticides not only deteriorates the quality and quantity of honey, but also causes harm to the bee colony itself. In the agriculture sector, the excessive usage of pesticides and fertilizer negatively impacts the overall honey production process. Bees, a pollinating agent, bring the polluted nectar back to their beehives, eventually contaminating the honey and depreciating its value. Hence, this article will comprehensively review the activities that contribute to heavy metal and pesticide contamination, the interactions of bees as a pollinating agent, the impact of the pollutant to the colonies, and subsequently to the honey production.

ICT and digital technology adoption, sustainable development, community empowerment and local wisdom and destinations uniqueness are keywords that will be further explored in the de-velopment of tourism villages in Kenderan as the most importance of tourism destinations de-velopment from the village level. Therefor this research is aimed at developing suitable model for post smart or wise tourism village through proposing Culture and Tradition Festival and the application of a circular economy. Circular economy development in tourism villages focuses on the application of sustainable production principles in the tourism value chain, namely in creating tourism experiences together with tourists (co-creation of experience) and integrated in a tourism system that supports environmental sustainability. This research is applied research conducted with a sequential mixed method research by conducting qualitative research through expert judgment and quantitative research by circulating questionnaire to tourists visiting Kenderan village, while the collected data is analyzed by Structural Equation Modelling to see the rela-tionship between variables. The results of this research show that creative event as the locality aspects of tourist village, digital competence, and sustainability practice are the building blocks of post smart tourism village, while digital competence and sustainable practice have significant mediating effect of locality on post smart tourism village. To make tourism village possesses sustainable competitive advantages, the village must explore and promote its locality aspects to differentiate its tourist village by identifying the valuable, rare, inimitable and non-substitutable tourism resources. The implication of this research is that to develop smart tourism destination wiser and distinctive, tourist village should explore their local values and resources, embed them into its tourism basic components and core resources, and co create, distribute, deliver and promote it to global market through technology adoption and global sustainability value.

Antioxidants are very beneficial for health because they protect the body from the effects of free radicals on various degenerative diseases caused by food contamination, air pollution, sunlight, etc. In general, methods for measuring the capacity of antioxidants generally use accurate meth-ods such as spectrophotometry and chromatography. Still, it takes time, sample preparation and must be done in a laboratory with particular expertise. Therefore, a new, more practical method needs to be developed for determining antioxidants, namely the electrochemical method. The electrochemical method is promising to develop because it has several advantages, including high sensitivity and fast response. The electrochemical method discussed in this article reviews sensors, biosensors, and nanosensors. This paper comprehensively analyzes contemporary developments in electrochemical biosensor techniques and antioxidant evaluation methodologies. The discussion centers on utilizing multiple biosensors. Electrochemical biosensors have been determined to be prevalent in analyzing food quality, assessing active factor functionality, and screening practical components. The present study outlines the difficulties linked with electrochemical bio-sensor technology and provides insights into the potential avenues for future research in this domain.

Chronic obstructive pulmonary disease (COPD) is increasingly being recognized as a systemic disease rather than a mere disorder of the lungs. Central (respiratory) and peripheral (limb) muscle weakness are among the main pronounced systemic effects of COPD. While the disease primarily affects the lower limb muscles and contributes to gait impairment, COPD is also associated with an increasing risk of falls in patients (COPDp). Previous studies have reported higher rates of falls among COPDp (1.17 to 1.20 falls/person-year), amounting to four times higher than an age-matched healthy group. Potential fall risk factors include muscle weakness, impaired daily activities, cognitive dysfunction, and gait and balance impairment. Although COPDp often manifest many of these risk factors, there remains a gap in literature regarding falls during walking in this population. This study aimed to 1. analyze the literature to identify the risk factors of falling in COPDp, and 2. investigate the underlying mechanisms by which these risk factors can lead to increased prevalence of falling. The results suggest that in addition to the known risk factors of falling, low back pain and mental fatigue should also be considered as relevant risk factors in the treatment process of these patients. Moreover, respiratory problems, which are common in this population, have demonstrated pronounced effects on energy expenditure, gait, and other types of activities of daily living (ADLs), leading to reduced intensity, disrupted coordination of the trunk-pelvic structure with the lower limbs during gait, and altered motor control performance due to activation of muscles in an inefficient synergic manner. These problems potentially lead to the increased vulnerability of these patients to external disturbances and higher incidence risk of falls and injuries. Cognitive problems, which are typically due to reduced oxygen received by the brain, as well as general inflammation caused by COPD, also play a significant role in gait disruption and balance. Future research is warranted to determine the prevalence of falls in COPDp by examining the response of these patients to Medio-Lateral (ML) and Anterior-Posterior (AP) disturbances during gait in association with traditional and recommended fall risk factors.

Topological indices are invariant numerical fields of a graph that give facts about the structure of graphs and are found to be very helpful in predicting the physical properties of aluminophosphates. The characteristics of the aluminophosphates are similar to those of zeolites. Two examples of current applications are natural gas dehydration and humidity sensor. New frameworks are being synthesised by researchers in chemistry and materials science. There are many layers and holes in these substances. In this study, Vertex version of distance-based topological indices, the entropy of topological indices and their numerical analysis are explained.

Purpose: To determine whether 24-hour IOP monitoring can be a predictor for glaucoma progression and to analyze the inter-eye relationship of IOP, perfusion and progression parameters. Methods: We extracted data from manually drawn IOP curves with HIOP-Reader, a software suite we developed. The relationship between measured IOPs and mean ocular perfusion pressures (MOPP) to retinal nerve fiber layer (RNFL) thickness was analyzed. We determined the ROC curves for peak IOP (Tmax), average IOP (Tavg), IOP variation (IOPvar) and historical IOP cut-off levels to detect glaucoma progression (rate of RNFL loss). Bivariate analysis was conducted to check for various inter-eye relationships. Results: 217 eyes were included. The average IOP was 14.8±3.5 mmHg, with a 24-hour variation of 5.2±2.9 mmHg. 52% of eyes with RNFL data showed disease progression. There was no significant difference in Tmax, Tavg and IOPvar between progressors and non-progressors (all p>0.05). Except for Tavg and the temporal RNFL, there was no correlation between disease progression in any quadrant, Tmax, Tavg and IOPvar. 24-hour and outpatient IOP variables had poor sensitivities and specificities in detecting disease progression. The correlation of inter-eye parameters was moderate; correlation with disease progression was weak. Conclusion: In line with our previous study, IOP data obtained during a single visit (outpatient or inpatient monitoring) make for a poor diagnostic tool, no matter the method deployed. Glaucoma progression and perfusion pressure in left and right eyes correlated weakly to moderately with each other.

Purpose: To investigate trabeculopuncture (TP) for predicting the outcome of ab interno trabeculectomy (AIT). AIT is an effective, low-risk procedure for open angle glaucoma. Despite widespread utilization, it fails in patients with an unidentified distal outflow resistance. Methods: We bisected 81 enucleated porcine eyes and perfused them for 72 hours. They were assigned to two groups: trial (n=42) and control (n=39). Intraocular pressure (IOP) was measured continuously. At 24 hours, four YAG-laser trabeculopunctures on the nasal trabecular meshwork were performed, followed by a 180° AIT at the same site at 48 hours. Eyes were divided into TP and AIT responders and non-responders; the proportion of TP responders between both AIT groups was compared. Results: Both post-TP and post-AIT IOPs were lower than baseline IOP (p=0.015 and p<0.01, respectively). The success rates of TP and AIT were 69% and 85.7%, respectively. The proportion of TP responders among AIT responders was greater than that of AIT non-responders (p<0.01). Sensitivity and specificity values of TP as predictive test for AIT success were 77.7% and 83.3%, respectively. The positive and negative predictive values were 96.6% and 38.5%, respectively. Conclusion: A 10% reduction in IOP after TP can be used as predictor for the success (>20% IOP decrease) of 180° AIT in porcine eyes.

A Natural gas is increasingly being sought after as a vital source of energy, given that its production is very cheap and does not cause the same environmental harms that other resources, such as coal combustion, do. Understanding and characterizing the behavior of natural gas is essential in hydrocarbon reservoir engineering, natural gas transport, and process. Natural gas compressibility factor, as a critical parameter, defines the compression and expansion characteristics of natural gas under different conditions. In this study, a simple second-order polynomial model based on the group method of data handling (GMDH) is presented to determine the compressibility factor of different natural gases at different conditions, using corresponding state principles. The accuracy of the model evaluated through graphical and statistical analyses. The results show that the model is capable of predicting natural gas compressibility with an average absolute error of only 2.88%, a root means square of 0.03, and a regression coefficient of 0.92. The performance of the developed model compared to widely known, previously published equations of state (EOSs) and correlations, and the precision of the results demonstrates its superiority over all other correlations and EOSs.

Neural microprobes represent an important component of neural prosthetic systems where implanted microprobes record the electro-potentials generated by specific thoughts in the brain and convey the signals to algorithms trained to interpret these thoughts. Here, we present novel elongated multi-site neural probe that can reach depths greater than 10mm. We hypothesize that reaching such depth allows the recording of cognitive signals required to drive cognitive prosthetics. The impedance of the recording sites on the probes was on the order of 500 kΩ at 1 kHz, which is consistent with probes used for neurophysiological recordings. The probes were made porous using Xenon Difluoride (XeF₂) dry etching to improve the biocompatibility and their adherence to the surrounding neural tissue. Numerical studies were performed to determine the reliability of the porous probes. We implanted the elongated probe in rats and show that the elongated probes are capable of simultaneously recording both spikes and local field potentials (LFPs) from various recording sites.

This research delves into librarians' perceptions of artificial intelligence (AI) support in learning experiences, lifelong learning, and digital literacy within the library context, undertaking a comparative analysis between Malaysia and Indonesia. Employing a survey methodology, a self-developed questionnaire was administered to 59 librarians in Malaysia and 85 in Indonesia. The questionnaire, utilizing a Likert scale, systematically explored subjective judgments on AI's impact across various dimensions. A noteworthy finding is the consistent and harmonized perception among librarians in both countries, underscoring a universal recognition of AI's perceived support for learning experiences, lifelong learning, and digital literacy. Of particular interest is the emphasis on sustainability in librarians' perspectives, as they recognize the enduring value of AI in fostering educational growth. Despite the limitations inherent in perceptual measures and a relatively modest sample size, the empirical and practical contributions of this study are significant. It offers a nuanced exploration of librarians' viewpoints, providing valuable insights for future research endeavors. Moreover, the study's findings have immediate practical implications for the integration of AI tools in library services, policy-making, and professional development, with a focus on ensuring sustainable implementation for long-term benefits.

This study explores the use of remote ultrasound vibration to enhance welding strength. It examines the effects of 20 kHz, and 40 kHz High Power Ultrasound Transducers (HPUT) in contact and contactless modes during ultrasonic assistance laser welding. Employing shear tests and microscopy for assessment, the research evaluates ultrasound's impact on welding strength and identifies the optimal transducer. Theoretical and numerical analyses investigate vibration transmission into the welding area, particularly examining the vibration distribution and cavitation initiation within the molten pool area. Results indicate that ultrasound-assisted welding increases pull test performance, including the resistance force and strain, and improves microscopic structural integrity. Numerical simulations suggest that narrow-band vibration intensifies pressure in specific welding zones. Contactless ultrasound application also shows enhanced welding quality, offering a promising alternative to current methods. This work contributes to electric car technology by suggesting improvements in welding techniques for power battery systems.

Amidst the burgeoning global concerns surrounding skin cancer, the quest for precise and efficient diagnostic methodologies has intensified. Conventional diagnostic approaches relying on subjective visual inspection by dermatologists often grapple with subjectivity and resource constraints. This predicament underscores the critical role of Artificial Intelligence (AI) in revolutionizing diagnostic paradigms by significantly enhancing accuracy and accessibility. This study embarks on an extensive exploration of skin cancer classification, specifically targeting the intricate task of 8-class skin cancer classification. Employing cutting-edge deep learning models on the ISIC2019 dataset, a comprehensive analysis was conducted utilizing a diverse array of pre-trained ImageNet architectures and Vision Transformer models. To counteract the inherent class imbalance in skin cancer datasets, a pioneering "Naturalize" augmentation technique was introduced, leading to the creation of indispensable tools—the Naturalized 2.4K ISIC2019 and groundbreaking Naturalized 7.2K ISIC2019 datasets—catalyzing advancements in classification accuracy. The pivotal role of AI in mitigating the risks of misdiagnosis and under-diagnosis in skin cancer becomes evident through this research. AI’s proficiency in analyzing vast datasets and discerning subtle patterns augments the diagnostic prowess of dermatologists significantly. Integration of AI-powered systems in skin cancer diagnosis holds immense promise in facilitating early detection and substantially improving patient outcomes. The meticulous evaluation employed quantitative measures such as confusion matrices, classification reports, and visual analyses using Score-CAM across diverse dataset variations. Astonishingly, the culmination of these endeavors culminated in an unprecedented achievement—100% average accuracy, precision, recall, and F1-Score—within the groundbreaking Naturalized 7.2K ISIC2019 dataset. This remarkable feat underscores the transformative potential of AI-driven methodologies, exemplifying their prowess in redefining the landscape of skin cancer diagnosis and management. In summary, this research represents a pivotal stride towards redefining dermatological diagnosis, showcasing the remarkable impact of AI-powered solutions in surmounting the challenges inherent in skin cancer diagnosis. The attainment of 100% across crucial metrics within the Naturalized 7.2K ISIC2019 dataset serves as a testament to the transformative capabilities of AI-driven approaches in reshaping the trajectory of skin cancer diagnosis and patient care.

Purpose: Nycthemeral (24-hour) glaucoma inpatient intraocular pressure (IOP) monitoring has been used in Europe for more than 100 years to detect peaks missed during regular office hours. Data supporting this practice is lacking, partially because it is difficult to correlate manually drawn IOP curves to objective glaucoma progression. To address this, we deployed automated IOP data extraction tools and tested for a correlation to a progressive retinal nerve fiber layer loss on spectral-domain optical coherence tomography (SDOCT). Methods: We created and deployed a machine-learning image analysis software to extract IOP data from hand-drawn, nycthemeral IOP curves of 225 retrospectively identified glaucoma patients. The relationship between demographic parameters, IOP and mean ocular perfusion pressure (MOPP) data to SDOCT data was analyzed. Sensitivities and specificities for the historical cut-off values of 15 mmHg and 22 mmHg in detecting glaucoma progression were calculated. Results: IOP data could be extracted efficiently. The IOP average was 15.2±4.0 mmHg, nycthemeral IOP variation was 6.9±4.2 mmHg, and MOPP was 59.1±8.9 mmHg. Peak IOP occurred at 10 AM and trough at 9 PM. Disease progression occurred mainly in the temporal-superior and -inferior SDOCT sectors. No correlation could be established between demographic, IOP, or MOPP parameters and SDOCT disease progression. The sensitivity and specificity of both cut-off points (15 and 22 mmHg) were insufficient to be clinically useful. Outpatient IOPs were non-inferior to nycthemeral IOPs. Conclusion: IOP data obtained during a single visit make for a poor diagnostic tool, no matter whether obtained using nycthemeral measurements or during outpatient hours.

Corporate identity has played a vital role in the Halal industry to create a strong foundation for its reputation in the long run. This paper used two modeling analyses for two different data. The first analysis aims to predict the relationship between Corporate Identity Management between Internal Brand and Employee Brand Support (consequence) mediated by CIM using partial-least squares-structural equation modeling (PLS-SEM). A total of 206 employees from Malaysia’s Halal food SMEs took part in the survey. The second analysis to identify topic proportions patterns using the topic modeling approach on Halal brand identity Machine learning approach of knowledge mining was applied for this analysis. Metadata of 1,091 articles were mined from the Scopus database on Halal studies across all social sciences fields. The result revealed that there was a partial relationship between Internal Brand (antecedent) and Employee Brand Support (consequence) mediated by CIM. This finding was supported by the identified topic proportions patterns from the topic modeling approach that pointed out a weak topic proportion on the Halal brand identity discussion globally, interestingly the result also found that the Halal brand identity discussion involving the Halal food industry is almost non-existed in Malaysia’s Halal food SMEs. The contributions of this paper were apparent in three major areas which are methodology, theoretical and future suggestions. The utilization of two different model analyses was able to confirm the consistency of the major findings with the literature review which opens up more possibilities for future researchers.

Background: Low-level (LLLT) and high-intensity laser therapy (HILT) can be beneficial additions to knee osteoarthritis (KOA) rehabilitation exercises; however, it is still being determined which modality is more effective. Aim: To compare the effects of LLLT and HILT as adjuncts to rehabilitation exercise (LL+EX and HL+EX) on clinical outcomes in KOA. Methods: Thirty-four adults with mild to moderate KOA were randomly allocated to either LL+EX (n = 17) or HL+EX (n = 17) groups. All participants underwent their designated laser treatment combined with rehabilitation exercises weekly for twelve consecutive weeks. The Knee Injury and Osteoarthritis Outcome Score (KOOS), Numerical Pain Rating Scale (NPRS), active knee flexion, and Timed Up-and-Go test (TUG) were assessed at baseline and immediately post-intervention. Results: Post-intervention, both groups significantly improved their KOOS, NPRS, active knee flexion, and TUG scores compared to baseline (p &lt; 0.01). The mean difference of change in KOOS, NPRS, and active knee flexion scores for the HL+EX group surpassed the minimal clinically important difference threshold. In contrast, the LL+EX group only demonstrated clinical significance in NPRS scores. Conclusions: Incorporating HILT as an adjunct to usual KOA rehabilitation led to significantly higher improvements in pain, physical function, and knee-related disability compared to LLLT.

Due to the increased use of memristors, and its many applications, the use of emulators has grown in parallel to avoid some of the difficulties presented by real devices such as variability and reliability. In this paper, we present a memristive emulator designed using a Switched Capacitor (SC), this is, an analog component/ block and a control part or block implemented using stochastic computing (SCo) and therefore fully digital. Our design is thus a mixed signal circuit. Memristor equations are implemented using stochastic computing to generate the control signals necessary to work with the controllable resistor implemented as switched capacitor.

Background: Nephrolithiasis, or kidney stone disease, presents a significant global health burden, with incidence rates and treatment practices varying widely globally. This study aims to discuss the epidemiology, risk factors, treatment modalities, and challenges for nephrolithiasis in the lower half of the World Bank Rank; low and lower-middle-income countries. Methods: A comprehensive literature review was conducted using PubMed for each country on the list, focusing on studies published from January 2000 onwards and reporting data on prevalence, risk factors, treatment practices, and economic implications. Results: Nephrolithiasis represents a significant burden for healthcare systems, with noteworthy geographical variability in prevalence possibly dependent on socioeconomic status and gender. Risk factors include dietary habits, climate, pollution, and infectious diseases. Treatment practices in some regions still rely on open surgery due to limited access to advanced endourological techniques, while other regions demonstrate high proactivity in research. The burden is exacerbated by inadequate healthcare infrastructure and training. Conclusions: Addressing nephrolithiasis in challenging economic circumstances requires targeted interventions, including improved access to modern treatment methods, enhanced training for healthcare professionals, and better socioeconomic and environmental conditions. Future research should focus on region-specific strategies and the development of sustainable healthcare solutions.

Central nervous system (CNS) uses vision, vestibular, and somatosensory information to maintain body stability. Research has shown that there is more lumbar proprioception error among low back pain (LBP) individuals as compared to healthy people. In this study, two groups of 20 healthy people and 20 non-specific low back pain participants (LBP) took part in this investigation. This investigation focused on somatosensory sensors and in order to alter proprioception, a vibrator (frequency of 70Hz, amplitude of 0.5 mm) was placed on the soleus muscle area of each leg and two vibrators were placed bilaterally across the lower back muscles. Individuals, whose vision was occluded, were placed on two surfaces (foam and rigid) on force plate, and trunk angles were recorded simultaneously. Tests were performed in 8 separate trials; the independent variables were vibration (4 levels) and surface (2 levels) for within subjects and 2 groups (healthy and LBP) for between subjects (4×2×2). MANOVA and multi-factor ANOVA tests were done. Linear parameters for center of pressure (COP) (deviation of amplitude, deviation of velocity, phase plane portrait (PPP), and overall mean velocity) and nonlinear parameters for COP and trunk angle ((recurrence quantification analysis) RQA and Lyapunov exponents) were chosen as dependent variables. Results indicated that NSLBP individuals relied more on ankle proprioception for postural stability. Similarly, RQA parameters for the COP on both sides and for the trunk sagittal angle indicated more repeated patterns of movement among the LBP cohort. Analysis of short and long Lyapunov exponents showed that people with LBP caused no use of all joints in their bodies (non-flexible), are less stable than healthy subjects.

Background: Health behaviors, such as diet and exercise, are actions individuals take that can potentially impact gastrointestinal (GI) symptoms and the gut microbiota. Little is known about how health behaviours impact GI symptoms and the gut microbiota after anti-cancer therapies. Methods: This is a secondary analysis of a cross-sectional study that investigated relationships between GI symptoms, gut microbiota, and patient-reported outcomes in adult cancer survivors. Gut microbiota was assessed from stool samples using 16S rRNA gene sequencing. GI symptoms and health behaviors were measured via self-report. Descriptive statistics, linear regression, and correlation analyses are reported. Results: A total of 334 cancer survivors participated and a subsample of 17 provided stool samples. Most survivors rated their diet as moderately healthy (55.7%) and reported engaging in low intensity exercise (53.9%) for ≤5 hours/week (69.1%). Antibiotic use was associated with more belly pain, constipation, and diarrhea (p&lt; .05). Survivors consuming a healthier diet had fewer symptoms of gas/bloating (p= 0.02). Better diet health was positively correlated with Lachnospiraceae abundance, and negatively with Bacteroides abundance (ps &lt;.05). Greater exercise frequency positively correlated with abundance of Lachnospiraceae, Faecalibacterium, Bacteroides, Anaerostipes, Alistipes, and Subdoligranulum. (ps&lt;.05). Conclusion: Results provide evidence for associations between dietary health behaviours and GI symptoms. Diet and exercise behaviours are related to certain types of bacteria, but the direction of causality is unknown. Dietary-based interventions may be optimally suited to address survivors’ GI symptoms by influencing the gut microbiota. Larger trials are needed.

Biofilms are complex communities of microorganisms that adhere to surfaces and develop a protective matrix. The colonization of devices in the food and health care industries by microbial biofilms poses numerous risks. Existing antimicrobial agents often fail to penetrate the biofilm matrix, allowing the pathogen to grow and persist. The objective of this study was to evaluate the impact of MADIO PRO+ multipurpose disinfectant on Salmonella Typhimurium biofilm using crystal violet assay and FTIR spectroscopy. Results demonstrated that MADIO PRO+ multipurpose disinfectant significantly (p<0.05) inhibited biomass of S. Typhimurium biofilm and altered the structure of S. Typhimurium biofilm. In conclusion, MADIO PRO+ multipurpose disinfectant offers an advantage in biofilm control strategy. This discovery could help the food and health care industries to plan better microbial intervention strategies.

Propolis is known to have many benefits, especially in the health sector. Due to the sharp aroma &amp; taste, and the phenolic compounds contained in propolis are easily oxidized &amp; hydrolyzed at high temperatures, the application of propolis in the food sector is still lacking. Microencapsulation with a coacervation complex is used to overcome these problems. The thickness of the coating material is an important factor in the microencapsulation of complex coacervation. This study aimed to determine the coating ratio used to produce propolis microcapsules with the highest phenolic stability during storage and heating. This study consisted of three treatment ratios of whey protein isolate (WPI) &amp; pectin coating materials 1:2, 1:1, and 2:1. The results showed that the yield value ranged from 37.279-40.116%, aw 0.375-0.529, and encapsulation efficiency 85.45-96.44%. The color of the microcapsules produced was bright (L* = 94.28-95.35%), tended to be reddish (a* = 0.07-0.11) &amp; yellowish (b* = 4.36-4.83). The difference in the ratios treatment significantly affected the storage stability, while the heating stability ratio only significantly affected the 2:1 treatment. The best total phenolic stability of propolis microcapsules during storage &amp; heating was obtained by 1:1 treatment with retention values of 97.31% and 63.86%.

Ganoderma boninense is the major causal agent for the basal stem rot (BSR) disease in oil palm, causing the progressive rot of the basal part of the stem. Despite its prominence, key pathogenicity determinants for the aggressive nature of hemibiotrophic infection remain unknown. In this study, genome sequencing and annotation of G. boninense T10 were carried out using the Illumina sequencing platform and comparative genome analysis was performed with previously reported G. boninense strains (NJ3 and G3). The pan-secretome of G. boninense was constructed and comprised of 937 core orthogroups, 243 accessory orthogroups, and 84 strain-specific orthogroups. A set of core candidate effector proteins (CEPs) were found to be enriched with catalytic protein classified as the carbohydrate-active enzymes, hydrolases as well as non-catalytic proteins. Differential expression analysis revealed an upregulation of CEP genes which was linked to the suppression of PTI signaling cascade while the downregulation of CEP genes was linked to the inhibition of PTI by preventing host defense elicitation. Genome architecture analysis revealed the one-speed architecture of the G. boninense genome and the lack of preferential association of CEP genes to the transposable elements. The findings obtained from this study would aid in the characterization of pathogenicity determinants and molecular biomarkers of BSR disease.

Drought and high temperature often occur simultaneously will eventually affect rice (Oryza sativa L.) yield and seed quality. The objective of the study was to compare the effects of high temperature (HT) and water limitation (WL) during seed development and maturation on yield component, seed quality, and amylose content in aerobic rice cv. MRIA. Two experiments were conducted concurrently in greenhouse with ⁓35/26℃ subjected to elevated HT and/or WL; 5 days 38/28°C at 10, 15, 29 DAA and/or HT; 7 days at 40/28℃ at 8 and 21 DAA with 12h photoperiod in control environment growth chamber. Both experiments were respectively harvested at physiological maturity of 31 and 35 DAA. Grain yielded from the irrigated plant declined from over 27% to below 18% between 15 and 29 DAA. Combination stresses resulted in greater reduction of grain yield than single stress. Late seed development (29 DAA) had no effect either on yield component or seed quality as well as produce a high concentration in amylase content (16.7%) with greater germination capacity (91%). The non-stress plant harvested at 21 DAA resulted the highest percentage of germinated seeds (97%) whereas the vigour index (VI) was reduced to 70.3% and 58.9% at 8 and 21 DAA respectively. Extended plant stress to 7 consecutive days incurred the highest VI with low concentration of amylose content. There was a linear relationship incurred between seed amylase content with germination capacity and VI, however, there was an inverse relationship (R2 = 0.19) between amylase content with VI from plant treated with (HT and/or WL) for 7 days. The present results confirmed that the avoidance HT and WL during early (10 DAA) and mid (15 DAA) seed development with short duration of stress (5 days) obtained better in yield component, enhanced the seed quality and amylose concentration. The combined HT and WL damaged seeds’ quality were more than each stress alone. Therefore, avoiding HT and WL can be practically applied by farmers by irrigating throughout the rice plant during histodifferentiation to save water usage during seed maturation.

Purpose: To compare the standard implantation technique of a new ab externo microshunt (PRESERFLO) to a posterior technique with a small incision. The standard anterior approach (A) requires a relatively large, 6-8 mm perilimbal peritomy. In contrast, the posterior approach (P) involves only a 2-3 mm snip incision 2 mm posterior to the limbus. Methods: Charts of 126 PRESERFLO patients (54 A and 72 P) were retrospectively analyzed. Follow-up was 270 days. We compared the surgical time, intraocular pressure (IOP), number of medications, and complications. Results: The preoperative IOP in A was 21.8±8.5 mmHg and 23.9±8.1 mmHg in P (p=0.08). The surgical time for A was 26±0.8 minutes and 10±0.4 minutes for B (p<0.001). Following a low-pressure phase during the first week, A and P had an IOP value of 10.8±5.9 mmHg and 10.6±4.5 mmHg at 30 days, respectively (p=0.62). IOPs remained at this level throughout the study (all intra-group p> 0.08). There were no inter-group differences in IOP at any visit (all p-values > 0.3). Patients in A and P took 3.2 ± 1.3 and 3.3 ± 1.0 pressure-lowering medications at baseline, respectively (p=0.4). These values declined to 0.2 ± 0.6 in A and 0.3 ± 0.7 in P at 270 days. Both groups had a similar number of revisions (13 (10.3%) versus 10 (7.9%, p=0.14)) and complications (26 (20.8%) versus 31 (24.6%, all p>0.25). Conclusion: The posterior PRESERFLO insertion technique was 2.6 times faster than the standard anterior technique and yielded similar results with a large reduction in IOP and medications and a safety profile favorable over traditional filtering surgery.