Reaction of 2-mercapto-3-phenylquinazolin-4(3H)-one (MPQ) with both 4-vinyl benzyl chloride and allyl bromide furnished the reactive heterocyclic monomers 3-phenyl-2-((4-vinylbenzyl) thio) quinazolin-4(3H)-one (PVTQ) and 2-(allylthio)-3-phenylquinazolin-4(3H)-one (APQ), respectively. Copolymerization of PVTQ monomer with styrene and methyl methacrylate in the presence of 2,2′-azobisisobutyronitrile (AIBN) afforded the copolymers PS-co-PPVTQ and PMMA-co-PPVTQ, respectively. Similarly, copolymerization of monomer APQ with styrene and methyl methacrylate (MMA) afforded the copolymers PS-co-PAPQ and PMMA-co-PAPQ, respectively. The resulted copolymers were characterized by using FT-IR, 1H-NMR and GPC techniques. Silver nanocomposites of PS, PMMA, PS-co-PPVTQ, PMMA-co-PPVTQ, PS-co-PAPQ and PMMA-co-PAPQ were synthesized by the addition of silver nitrate into the polymer solution. The reduction of silver ions into silver nanoparticles was performed in DMF and water. Thermogravimetric (TGA) analysis was used to determine the thermal stability of the copolymers and their silver nanocomposites. The X-ray diffraction (XRD) analysis indicated the amorphous structures of the co-polymers and confirmed the formation of silver nanoparticles. The antitumor and antibacterial activities were screened for the copolymers and enhanced by the formation of their silver nanocomposites. In vivo antitumor activity in Ehrlich Ascitic Carcinoma (EAC) mice model showed that PS-co-PPVTQ/Ag NPs, PMMA-co-PPVTQ/Ag NPs, and PMMA-co-PAPQ/Ag NPs displayed promising inhibitory effects against EAC and induce apoptosis against MCF-7 cells.

The increased emergence of multidrug-resistant Helicobacter pylori influences the prevention of stomach cancer. Zingiber officinale is a plant usually used in folk medicine to treat a variety of diseases involving infections, nausea, vomiting, peptic ulcer, dyspepsia, and inflammation. This study was conducted to evaluate the ability of Z. officinale extract to combat resistant H. pylori. The disc diffusion, microdilution, and microplate assays were performed to evaluate the susceptibility to antibiotics, and the antibacterial and antibiofilm activities of the Z. officinale extracts. Using the checkerboard method, the combined effects of the gentamicin and Z. officinale extract were investigated. In addition, anti-inflammatory activity and GC-MS analysis were determined by the modified protocol. According to the findings, H. pylori isolates exhibited resistance rates of 56.33, 50.0, and 45.85 for metronidazole, gentamicin, and tetracycline, respectively. The methanolic extract of Z. officinale had the strongest effectiveness against resistant H. pylori isolates with MIC of 20.0 to 50.0 µg/ml against both H. pylori isolates and the stranded strain NCTC 11637. Z. officinale extract suppress the biofilm formed by H. pylori isolates with a percentage of 92.96% at 50.0µg/ml, compared with 97.19% for gentamicin at the same concentration. According to FICI values, combination of methanolic Z. officinale extract to gentamicin increases bacterial sensitivity to such drugs. Moreover, the Z. officinale extract exhibits strong anti-inflammatory activity. The GC-MS analysis of Z. officinale extract exhibits 17 different chemical compounds. Conclusions: The Z. officinale extract contain the anti-inflammatory compound gingerol as the main constituent which inhibits the growth of H. pylori and its biofilm, are a promising natural therapeutic alternative or enhance antibiotics activity

The technology-driven world of the 21^st century is currently confronted with a major threat to humankind in the form of the coronavirus disease (COVID-19) pandemic, caused by the severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). As of April 22, 2020, COVID-19 has claimed 169, 006 human lives and had spread to over 200 countries with more than 2,471,136 confirmed cases. The perpetually increasing figures associated with COVID-19 are disrupting the social and economic systems globally. The losses are unmatched and significantly higher compared to those from previously encountered pathogenic infections. Previously, two CoVs (SARS-CoV and Middle East respiratory syndrome-CoV) affected the human population in 2002 and 2012 in China and Saudi Arabia, respectively. Based on genomic similarities, animal-origin CoVs, primarily those infecting bats, civet cats, and pangolins, were presumed to be the source of emerging human CoVs, including the SARS-CoV-2. The cohesive approach amongst virologists, bioinformaticians, big data analysts, epidemiologists, and public health researchers across the globe has delivered high-end viral diagnostics. Similarly, vaccines and therapeutics against COVID-19 are currently in the pipeline for clinical trials. The rapidly evolving and popular technology of artificial intelligence played a major role in confirming and countering the COVID-19 pandemic using digital technologies and mathematical algorithms. In this review, we discuss the noteworthy advancements in the mitigation of the COVID-19 pandemic, focusing on the etiological viral agent, comparative genomic analysis, population susceptibility, disease epidemiology, animal reservoirs, laboratory animal models, disease transmission, diagnosis using artificial intelligence interventions, therapeutics and vaccines, and disease mitigation measures to combat disease dissemination.

The importance of understanding the corrosion mechanisms of excavated metal artefacts help in determining the physico-chemical parameters of the burial environment and the formation of different corrosion products. These products can be observed and analysed with the help of various techniques that provide information on their morphology, chemical composition and structure. The analysis of ancient coins is extremely challenging in the presence of heavily corroded surfaces; as quantitative information may not exactly concur with its bulk composition. In the case of silver coins, the use of surface information can be used as a guide for bulk composition only. The current study carries out investigation and characterization of selected coins from a large coin hoard excavated from Amheida, Dakhla oasis, Egypt. The study and analysis of the alloy composition and corrosion products was performed using a multi-technique approach which included Light optical microscopes, Scanning Electron microscope (SEM) coupled with energy dispersive spectroscopy (EDS) and X-ray diffraction analysis. Investigation of the coins revealed the presence of a thick active inhomogeneous corrosion crust, while analysis showed that the coins were made from a binary silver copper alloy (billon) while the corrosion crust was rich in chlorides and carbonates, later identified by XRD analysis as Paratacamite, Malachite and Chrysocolla.

The purpose of this paper is to explore the impact on corporate social responsibility when Jordanian banks disclose risks. The main objective of the study is to investigate the relationship between risk disclosure and corporate social responsibility in the banking sector in Jordan. To achieve this goal, data was collected from 23 Jordanian banks listed on the Amman Stock Exchange (ASE) over a period of 10 years, from 2010 to 2019. The data was analyzed using a regression model with four independent variables that represent the risk disclosure; corporate social responsibility was used as the dependent variable. The study also built in controls for the age of each bank, its size, leverage, and ROE, to ensure that the results were not affected by these factors. The results of the study show that all independent variables are positively correlated with corporate social responsibility. This suggests that disclosing risks is an effective way to improve corporate social responsibility in the banking industry. The findings of this study have important practical implications for bank managers, future researchers, and policymakers. The study also highlights the importance of future research in this field in order to understand the relationship between risk disclosure and corporate social responsibility in other countries and within other sectors of industry.

This research answers the knowledge gap regarding the explanation of the quantum jump of the electron. This scientific paper aims to complete Einstein's research regarding general relativity and attempt to link general relativity to quantum laws.

This research answers the knowledge gap regarding the explanation of the quantum jump of the electron. This scientific paper aims to complete Einstein's research regarding general relativity and attempt to link general relativity to quantum laws.

Superficial mycoses, encompassing a range of fungal infections affecting the outer layers of the skin, hair, and nails, have become increasingly prevalent in recent years. While these infections are generally non-life-threatening, the emergence of antifungal resistance poses a growing threat to effective treatment strategies. In this article we explore the escalating specter of antifungal resistance in superficial mycoses, focusing on the underlying mechanisms driving resistance, the clinical implications, and potential avenues for mitigation. The rise of antifungal resistance in superficial mycoses is multifactorial. Consequently, the efficacy of conventional treatments is diminishing, leading to persistent or recurrent infections. Understanding the molecular mechanisms underlying antifungal resistance is crucial for developing targeted therapeutic approaches. Research efforts aimed at unraveling these mechanisms are essential for identifying new drug targets and designing innovative treatment strategies to combat resistant strains. In response to the escalating threat of antifungal resistance, a multifaceted approach is required. This includes enhanced surveillance of antifungal susceptibility patterns, the development of novel antifungal agents, and the implementation of stringent guidelines for antifungal use. Additionally, educational initiatives targeting healthcare professionals and the public are essential to promote responsible antifungal use, reduce the risk of resistance emergence, and improve treatment outcomes.

Objectives: Multicentric Osteolysis, Nodulosis, and Arthropathy (MONA) syndrome is a rare genetic skeletal dysplasia. Its diagnosis can be deceptively similar to childhood-onset genetic skeletal dysplasias and juvenile idiopathic arthritis. We aimed to report the syndrome’s clinical and radiologic features with emphasis on skeletal manifestations. And establish relevant phenotype-genotype correlations. Methods: We evaluated two boys, 4-and-7-years-old with MONA syndrome. Both patients had consanguineous parents. We verified the diagnosis by correlating the outcomes of clinical, radiologic and molecular analysis. We specifically evaluated the craniofacial morphology and clinical and radiographic skeletal abnormalities. We contextualized the resultant phenotype-genotype correlations to publications on MONA and its differential diagnosis. Results: Skeletal manifestations were the presenting symptoms and mostly restricted to hands and feet in terms of fixed extension deformity of the metacarpophalangeal and flexion deformity of the interphalangeal joints with extension deformity of big toes. There were arthritic symptoms in the older patient especially of the wrists and minute pathologic fractures. The skeletal radiographs showed osteopenia/dysplastic changes of hands and feet. Both patients had variants in the matrix metalloproteinase2 gene which conformed to phenotype of previously reported literature in one patient while the other had a novel variant which conformed to MONA phenotype. Craniofacial abnormalities were present. However, minimal extra-skeletal manifestations. Conclusion: Overall, there is an emerging distinctive skeletal pattern of involvement in terms of both clinical and radiographic features. This includes age of onset and location of presenting skeletal manifestations, chronological order of joint affection, longitudinal disease progression, specifics of skeletal radiographic pathology and craniofacial features. Nevertheless, physicians are cautioned against differential diagnosis of similar genetic skeletal dysplasias and juvenile idiopathic arthritis.

Background: As the impacts of diabetes-induced reproductive damage are now evident in young people, we are now in an urgent need to devise new ways to protect and enhance the reproductive health of diabetic people. The purpose of this study was to assess the protective impact of enalapril (an ACE inhibitor) and paricalcitol (a vitamin D analogue) alone and in combination, on streptozotocin (STZ) diabetes-induced testicular dysfunction in rats. Material and methods: This study was carried on 50 male Sprague-Dawley rats; 10 normal rats were allocated as non-diabetic control group. 40 rats developed diabetes after receiving a single dose of STZ, then the diabetic rats were divided into four groups of equivalent number assigned as diabetic control, enalapril treated, paricalcitol treated, in addition to combined enalapril and paricalcitol treated groups. The effects of mono and combined therapy with paricalcitol and enalapril on testicular functions, sperm activity, glycemic state oxidative stress and inflammatory parameters as well as histopathological examination were assessed when compared to the normal and diabetic control rats. Results: As a result of diabetes induction, epididymal sperm count, sperm motility, serum levels of testosterone, follicle stimulating hormone (FSH) as well as luteinizing hormone (LH) and the antioxidant enzyme activities were significantly decreased, while abnormal sperm (%), insulin resistance, nitric oxide (NO), malondialdehyde (MDA), interleukin-6 (IL-6) as well as tumor necrosis factor-α (TNF-α) were significantly increased, along with sever distortion of testicular structure. Interestingly, treatment with paricalcitol and enalapril either alone or in combination significantly improved the sperm parameters, increased antioxidant enzyme activities in addition to serum levels of testosterone, FSH and LH, reduced insulin resistance, IL-6 and TNF-α levels and finally ameliorated the diabetes-induced testicular oxidative stress and histopathological damage with somewhat superior effect for paricalcitol monotherapy and combined therapy with both drugs than monotherapy with enalapril alone. Conclusion: Monotherapy with paricalcitol and its combination therapy with enalapril has a somewhat superior effect in improving the diabetes-induced testicular dysfunction (most probably as a result of their hypoglycemic, antioxidant, anti-inflammatory and anti-apoptotic properties), than monotherapy with enalapril alone in male rats, recommending a synergistic impact of both drugs.

Nuclear receptors (NRs) constitute a superfamily of ligand-activated transcription factors with a paramount role in ubiquitous physiological functions such as metabolism, growth, and reproduction. Owing to their physiological role and druggability, NRs are deemed attractive and valid targets for medicinal chemists. Pentacyclic triterpenes (PTs) represent one of the most important phytochemical classes present in higher plants, where oleanolic acid (OA) is the most studied PTs representative owing to its multitude of biological activities against cancer, inflammation, diabetes, and liver injury. PTs possess a lipophilic skeleton that imitates the NRs endogenous ligands. Herein, we report a literature overview on the modulation of metabolic NRs by OA and its semi-synthetic derivatives, highlighting their health benefits and potential therapeutic applications. Indeed, OA exhibited varying pharmacological effects on FXR, PPAR, LXR, RXR, PXR, and ROR in a tissue-specific manner. Owing to those NRs modulation, OA exhibited prominent hepatoprotective properties comparable to ursodeoxycholic acid (UDCA) in a bile duct ligation mice model and antiatherosclerosis effect as simvastatin in a model of New Zealand white (NZW) rabbits. It also demonstrated a great promise in alleviating non-alcoholic steatohepatitis (NASH) and liver fibrosis, attenuated alpha-naphthol isothiocyanate (ANIT)-induced cholestatic liver injury, and controlled blood glucose levels, making it a key player in the therapy of metabolic diseases. We also compiled OA semi-synthetic derivatives and explored their synthetic pathways and pharmacological effects on NRs, showcasing their structure-activity relationship (SAR). To the best of our knowledge, this is the first review article to highlight OA activity in terms of NRs modulation.

Shale gas production is associated with significant usage of fresh water and discharge of wastewater. Consequently, there is a necessity to create the proper management strategies for water resources in shale gas production and to integrate conventional energy sources (e.g., shale gas) with renewables (e.g., solar energy). The objective of this study is to develop a design framework for integrating water and energy systems including multiple energy sources, cogeneration process, and desalination technologies in treating wastewater and providing fresh water for shale gas production. Solar energy is included to provide thermal power directly to a multi-effect distillation plant (MED) exclusively (to be more feasible economically) or indirect supply through a thermal energy storage system. Thus, MED is driven by direct or indirect solar energy, and excess or direct cogeneration process heat. The proposed thermal energy storage along with the fossil fuel boiler will allow for the dual-purpose system to operate at steady-state by managing the dynamic variability of solar energy. Additionally, electric production is considered to supply a reverse osmosis plant (RO) without connecting to the local electric grid. A multi-period mixed integer nonlinear program (MINLP) is developed and applied to discretize operation period to track the diurnal fluctuations of solar energy. The solution of the optimization program determines the optimal mix of solar energy, thermal storage, and fossil fuel to attain the maximum annual profit of the entire system. A case study is solved for water treatment and energy management for Eagle Ford Basin in Texas.

Researches are moving to iron and ammonia elimination from ground water. Here, we are using poly acrylic–poly acrylamide hydrogel which grafted with 3-chloroaniline. This copolymer was synthesized by addition polymerization. Effect of agitation time, dosage and adsorbents temperature on the removal process sensitivity has been investigated. The copolymer was described experientially and theoretically. Isothermal, kinetic adsorption models and were discussed. This hydrogel could be regenerated efficiently (98.3%removal of iron and 100% removal of ammonia). Density functional theory DFT method using B3LYP/6-311G(d,p),LANL2DZ level of the theory were managed to investigate stationary states of grafted co-polymer and the complexation energy of the hydrogel with the studied cations. NBO analysis is using DFT to investigate the negative centers on the hydrogel. The complexation energy showed selectively of hydrogel to studied cations.

Water pollution with dyes is a critical environmental issue because off the huge amount of dyes disbarred annually which cause severe damage for the ecosystem and human life. On the other hand, the core-shell based magnetic materials have showed amazing character for controlling the material synthesis with targeted structure to enhance the adsorptive-removal of pollutants. Herein, Fe3O4 core-TiO2/mesoSiO2 and Fe3O4 core-mesoSiO2/TiO2 double shell nanoparticles were prepared by first (R1) and second (R2) routes. The preparation procedure is controlled to prepare the magnetic core with further coating layers from silica and titania for the uptake of methylene blue from aqueous solutions. The reported adsorption capacities for R1-0.2, R1-0.4 and R2 samples were 46, 38 and 50 mg/g respectively at pH 6 after 80 min contact time form 50 ppm methylene blue solution. The adsorption process of methylene blue onto Fe3O4core-meso SiO2/TiO2 double shell was well fitted with the pseudo-second-order kinetic model and Freundlish isotherm which suggested the quick and multilayer adsorption mechanism. In addition, results of thermodynamic investigation indicated that the surfaces of Fe3O4 core-mesoSiO2/TiO2 and Fe3O4 core-TiO2/mesoSiO2 double shell exhibit spontaneous tendency to adsorb methylene blue from the aqueous solutions. These results will encourage the further application of Fe3O4 core-meso SiO2/TiO2 and Fe3O4 core-TiO2/meso SiO2 double shell for removal of other dyes and pollutants from wastewater.

The requirement for developing tools capable of detecting and monitoring heavy metals (HMs) has recently taken on more significance due to worries about their toxic effect on human health and aquatic habitats. In this study, a simple electrochemical sensing carbon paste electrode (CPE) based on composite of Zinc/Iron layered double hydroxide (LDH) and polyaniline (PANI) was developed for the determination of lead ions in aquatic solutions. For this purpose, Zn-Fe LDH/PANI was prepared and characterized by Fourier transform infrared (FTIR), X ray diffraction (XRD), and scanning electron microscopy (SEM). Modified carbon electrode based Zn-Fe LDH/PANI was electrochemically characterized compared with unmodified electrode in FCN as a redox probe using cyclic voltammetry (CV). Thus, Zn-Fe LDH/PANI was utilized as sensing material for the electrochemical determination of lead ions using differential pulse voltammetry (DPV). Zn-Fe LDH/PANI/CPE show limits of detection (LOD) and quantification (LOQ) of 167.8 nM and 559.4 nM, respectively. Zn/Mg/Fe LDH was prepared using co-precipitation method and characterized by XRD, FTIR, SEM and BET, used for removal of Pb+2 ions. Removal process was investigated at different conditions as pH, metal ion concentrations, starting adsorbent dose at first and contact time. Zn/Mg/Fe LDH was evaluated as an effective adsorbent material for lead ions elimination in aquatic solutions, with capacity of adsorption 700 mg/g. The elimination of lead ions on Zn/Mg/Fe LDH fitted the pseudo first-order kinetics model and the isotherm was matched with Langmuir model. Studies revealed that the ideal removal conditions were pH = 5.0, an adsorbent mass of 0.05 g, and 20 ml of 50 ppm metal ion concentration at 60 min. The Zn-Fe LDH/PANI composite also showed potential anti-cancer properties against lung cancer cells (A549) while maintaining safety for normal lung fibroblast cells (WI-38). Collectively, advancements in electrochemical sensors offer promising solutions for lead ion detection, with wide-reaching applications in wastewater treatment and cytotoxicity assessment. These innovations have the potential to enhance environmental monitoring and public health safety.

Water microbial contamination is a serious issue that poses a risk to both animal and human health. 120 water samples collected from main water source and drinkers from a poultry farm. Different bacterial pathogens were isolated from water sources. Escherichia (E.) coli, Pseudomonas (P.) aureoginosa, (Salmonella) S. Typhimurim, Aeromonas (A.) hydrophila at different percentages. Variable degree of bacterial resistance to some commercial disinfectants commonly used to disinfect water system (iodine, terminator and H2O2). Nanoparticles were used to control bacteria in water. About the safety investigation for the prepared nanomaterials, the work results demonstrated that zinc oxide (ZnO) nanoparticles (NPs) exhibit the highest safety profile among the manufactured materials. The median fatal dose (LD50) for ZnO NPs was determined to be 3709 mg/kg body weight. In comparison, the LD50 values for zeolites and nanocomposites were 3251 mg/kg and 2658 mg/kg, respectively. Therapeutic dosages were estimated based on the LD50. Zeolite NPs, ZnO NPs and ZnO/zeolite NPs showing promising results in control of those bacteria. It was concluded that the escalating resistance of bacteria to disinfectants have led to a need to find alternative such as nanoparticles that proved promising results in control of pathogens, particularly it showed a safe effect on laboratory animals.

The coexistence of SAH with T2DM is a common comorbidity. In this present study, we investigated the link between altered plasma antioxidant trace elements (ATE: Manganese, Selenium, Zinc and Copper) and fatty acids ratio (FAR: polyunsaturated/saturated) imbalance as transition biomarkers between vascular pathology (SAH) to metabolic pathology (T2DM). Our data revealed strong correlation between plasma ATE and FAR profile which is modified during SAH-T2DM association compared to healthy group. This relationship is mediated by lipotoxicity (simultaneously prominent visceral adipose tissue lipolysis, significant flow of non-esterified free fatty acids release, TG-Chol-dyslipidemia, high association of Total SFA, Palmitic acid, Arachidonic acid and PUFA 6/ PUFA 3; drop in tandem of PUFA / SFA and EPA+DHA); oxidative stress (lipid peroxidation confirmed by TAS depletion and MDA raise, concurrently drop of Zn/Cu-SOD, GPx, GSH, Se, Zn, Se/Mn, Zn/Cu; concomitantly enhance Cu, Mn and Fe); endothelial dysfunction (endotheline-1 increase); athero-thrombogenesis risk (concomitantly raise of ApoB100/ApoA1, Ox-LDL, tHcy and Lp(a)) and inflammation (higher of Hs-CRP, Fibrinogen and Ferritin). Our study open to new therapeutic targets and to better dietary management, such as to establish dietary ATE and PUFA 6 / PUFA 3 or PUFA / SFA reference values for atherosclerotic risk prevention in hypertensive-diabetics patients.

This study challenges the prevailing belief in the necessity of complex models for accurate forecasting by demonstrating the effectiveness of parsimonious econometric models, namely ARCH(1) and GARCH(1,1), over deep learning robust approaches, such as LSTM and 1D-CNN neural networks, in modeling historical volatility within pre-emerging stock markets, specifically the Moroccan and Bahraini stock markets. The findings suggest reevaluating the balance between model complexity and predictive accuracy. Future research directions include investigating the potential existence of threshold effects in market capitalization for optimal model performance. This research contributes to a deeper understanding of volatility dynamics and enhances forecasting models’ effectiveness in diverse market conditions.

Phylogenetic analysis of blood parasite infections including Babesia (B.) bovis, Babesia microti and Trypanosoma (T.) spp. in one-humped camel (Camelus dromedarius) (n= 142) breeds in Halayeb and Shalateen, in Upper Egypt were performed in the current study. Polymerase chain reaction (PCR) assays targeting the Rhoptry Associated Protein-1 (RAP-1), Babesia microti small subunit rRNA (ss-rRNA) and internal transcribed spacer 1 (ITS1) genes were used to detect the prevalence of B. bovis, B. microti and Trypanosoma spp. in camels, respectively. Nested PCR assays were used for the detection of Babesia spp. (B. bovis and B. microti). While, KIN-multi species PCR reaction was employed to detect and identify trypanosome DNA in camels. B. microti was detected in (17/142) with infection rate (11.97 %). Sequencing and phylogenetic analyses revealed that B. microti detected in camel was closely related to the German strain in rats and voles in France. B. bovis was also detected in (4/142) with infection rate (2.81%). The sequence and phylogenetic analyses revealed that the isolated B. bovis was closely related to strains isolated from Argentine, USA and Brazil. Moreover, T. evansi was detected in (8/142) with infection rate (5.63%). Sequence and phylogenetic analyses revealed that isolated T. evansi was closely related to T. theileri that was detected from cattle in Brazil. This study provides the first evidence of B. microti in camel in Egypt and highlights the possible role of one-humped camels in maintaining the enzootic cycle of Babesia transmission in Egypt.

This paper aims to provide an adaptation of the TL-moments method to censored data. The present study concentrates on Type-I censored data. The idea of using TL-moments with censored data may seem conflicting. But our perspective in that, we may use data censored from one side and trimmed from the other side. This study is applied to estimate the two unknown parameters of the Weibull distribution. The suggested point is compared with Direct L-moments and ML methods. A Monte Carlo simulation study is carried out to compare these method in terms of estimate average, root of mean square error (RMSE) and relative absolute biases (RAB).

Background: Early identification and prevention of hypoxic ischemic encephalopathy (HIE) may reduce neonatal mortality and morbidity. Objective: We aimed to correlate between urinary Activin-A and MRI (conventional and Diffusion-weighted) and the severity of HIE in full-term neonates. Methods: Forty-five full-term neonates with HIE admitted to NICU and 15 normal neonates were enrolled into the study. The concentration of urinary Activin-A was determined using enzyme immunoassay kits and MRI were done. Correlations between urinary Activin-A and MRI with the degree of HIE were done. Results: Urinary Activin-A levels were significantly higher in neonates with HIE than controls (P<0.001). It was positively correlated with the clinical grading of HIE and a cutoff value of 0.08µg/l on day-1 after birth had a sensitivity of 98.6% and specificity of 97.1% for prediction of HIE. DW-MRI detected HIE with a high sensitivity (85%) compared to the low sensitivity of conventional MRI (35%). An ADC value of ≤ 0.8 was the best sensitivity-specificity cutoff point for detecting severe ischemic injury. DW-MRI imaging was positively correlated with Urinary Activin-A and both of them were positively correlated with the clinical grades of HIE (P < 0.001). Conclusions: DW-MRI imaging is correlated well with urinary Activin-A in full-term neonates with HIE and both of them are correlated with the degree of HIE. Early determination of urinary Activin-A combined with DW-MRI imaging can early detect HIE and its severity in full-term neonates with HIE.

This study introduces a novel algorithm tailored for the precise detection of lower outliers in univariate datasets, particularly suited for scenarios with a single cluster. The approach leverages a combination of transformative techniques and advanced filtration methods to efficiently segregate anomalies from normal values. Notably, the algorithm emphasizes high precision, ensuring minimal false positives, and requires only a few parameters for configuration. Its unsupervised nature enables robust anomaly filtering without the need for extensive manual intervention. To validate its efficacy, the algorithm is rigorously tested using real-world data obtained from photovoltaic (PV) module strings with similar DC capacities, containing various anomalies. Results demonstrate the algorithm's capability to accurately identify lower outliers while maintaining computational efficiency and reliability in practical applications.

Water stress (drought and waterlogging) is drastic abiotic stress to plant growth and development. Melatonin, bioactive plant hormone, has been widely tested in drought situations in diverse plant species, while a few studies on the role of melatonin in waterlogging stress conditions have been published. In the current review, we analyze the bio-stimulatory functions of melatonin on plants under both drought and waterlogging stress. Melatonin controls the levels of reactive oxygen and nitrogen species and positively changes the molecular defense to improve plant tolerance against drought and waterlogging stress. Moreover, the crosstalk of melatonin and other phytohormones is a key element on plant survival under drought stress, while this relationship needs further investigation under waterlogging stress. In this review, we draw the complete story of water stress on both sides: drought and waterlogging through discussing the previous critical studies under both conditions. Moreover, we suggest several research directions, especially for waterlogging, which remains a big vague piece of melatonin and water stress puzzle.

The resonance spectra of neutral silver indicate self-absorption for the studied Ag I lines at the wavelengths of 327.9 nm and 338.2 nm. The center dip is associated with self-reversal due to self-absorption in the plasma. The Q-switched radiation of 355 nm, 532 nm, or 1064 nm from a Nd:YAG laser device generates the plasma at the surface of silver nano-material targets, with experiments conducted in standard ambient temperature and pressure laboratory air. Procedures for recovery of the spectral line shapes confirm that over and above the effects of self-reversal, line shape distortion are important in the analysis. The work discusses parameters describing self-absorption when using fluence levels of 2 to 33 J/cm² to generate the plasma. Furthermore, subsidiary calibration efforts that utilize the hydrogen alpha line of the Balmer series show that the Ag I lines at 827.35 nm and 768.7 nm are optically thin.

Electric energy has become essential nowadays not only for the daily life of each of us but also for the economy of different countries. The dissemination of geographic information plays an important role in national development as it facilitates communication between managers, investors, and consumers in this sector. Since the management of electricity network data was previously done in Tunisia based on paper maps and plans, the purpose of this article is to present a case of planning based on GIS, Web, and 3D Web GIS, which would have significant positive consequences on this sector from a technical and financial sides with an improvement in customer satisfaction and the creation of an intelligent electricity network which will be a real decision-making tool. This work draws up an inventory of the network MV (Medium Voltage)/LV (Low Voltage) of the region of Medjez El Bab which routes electricity to the big centers of consumption with access to MV/LV subscribers. The analysis of the network's impedance allowed carrying out different scenarios to optimize performance and obtain more realistic routes. Many thematic maps were produced as part of this project (Slope map, Land use map, map of the MV voltage domains, map of the MV/LV transformer stations power, etc.). A three-dimensional virtual city has been developed to visualize the graphical and attribute data for the study area. A Web and 3D Web GIS applications that allows the publication of the interactive maps on the Web as well as the database information have been developed to offer users the possibility of consulting the produced products by internet. Finally, a website related to the study was developed.

Converting chemical energy from green hydrogen to electricity using Membrane Exchange Protons Fuel cell (PEMFC) is a promising solution in various applications such e-mobility and building facilities. The electrical efficiency of PEMFCs can reach 60%. However, they are immensely sensitive to the working temperature, requiring good thermal management. Active thermal management systems are expensive and energy-consuming. Passive thermal management systems enable PEMFC thermal management without additional energy consumption. Here various passive thermal management technologies are reviewed. Different techniques are thorougly described and critically compared in terms of complexity, efficiency, cooling rate, scope of applicability, and the sizes of PEMFCs to which they apply. The conclusions provide a solid background for further investigations, and recommendations for future work are suggested.

This study evaluates the feasibility of stabilizing clay bricks with marble cutting waste (MCW). This waste currently discarded in huge quantities as a sludge resulted from sawing the marble blocks to slabs, grinding and polishing of marble processes to the landfills located around the marble processing factories located in the Shaq El-Thoban industrial zone, Cairo governorate, Egypt causing negative impacts on the environment, health and sustainable development. Experimental investigations were carried out to explore the effect of addition of the MCW in different clay-base mixes at different percentages up to 25% at the expense of the hydrated lime. Cement, hydrated lime and MCW are the three types of solidification agents used, clay and sand were also added in the formulations of the unfired clay brick specimens. Laboratory cylindrical stabilized and compressed specimens were made, and then they were cured in a humidity chamber for 2 and 4 weeks, then after were air dried, tested and evaluated according to the Egyptian code for the building by the stabilized and compressed earth soil (ECBS, 2016). To enhance the durability of the cured specimens, transparent silicon – based paint was used for this purpose. The laboratory results demonstrate high potential usage of MCW based additives up to 15% incorporating HL. In addition, the used paint could be an effective treatment way for the use of stabilized bricks in a wet environment. The use of eco-friendly building materials will be a great contribution for the environmental advantages and suggest a remarkable economical alternative to the fired building units.

Amyloids are fibrillar protein aggregates that are associated with diseases such as Alzheimer’s disease, Parkinson’s disease, type II diabetes and Creutzfeldt–Jakob disease. The process of amyloid aggregation involves three pathological protein transformations; from natively-folded conformation to the cross-β conformation, from biophysically soluble to insoluble, and from biologically functional to non-functional. While amyloids share a similar cross-β conformation, the biophysical transformation can either take place spontaneously via a homogeneous nucleation mechanism (HON) or catalytically on an exogenous surface via a heterogeneous nucleation mechanism (HEN). Here, we postulate that the different nucleation pathways can serve as a mechanistic basis for an etiological classification of amyloidopathies, where hereditary forms generally follow the HON pathway, while sporadic forms follow surface-induced (including microbially-induced) HEN pathways. Furthermore, the conformational and biophysical amyloid transformation results in loss-of-function (LOF) of the original natively-folded and soluble protein. This LOF can, at least initially, be the mechanism of amyloid toxicity even before amyloid accumulation reaches toxic levels. By highlighting the important role of non-protein species in amyloid formation and LOF mechanisms of toxicity, we propose a generalized mechanistic framework that could help better understand the diverse etiology of amyloid diseases and offer new opportunities for therapeutic interventions including replacement therapies.

The present study focuses on the synthesis, characterization, and investigation of a p-n heterojunction photocatalysis. Titanium dioxide (TiO2) can’t alone induce the photocatalytic water splitting due to its wide bandgap, which decreases its catalytic activity in the visible light. To make redshift of absorptivity for the TiO2, Nickel (Ni)-doped Graphene (rGO) supported TiO2 was synthesized. Several characterization techniques have been employed to validate the composition and the light absorption ability of the prepared photocatalysts including TEM, SEM, EDS, XRD, XPS, and UV-Vis spectroscopy. The characterization revealed successful doping of the Ni and TiO2 on the rGO nanosheet. Moreover, the UV-Vis spectroscopy indicated a significant shift of light absorption toward the visible spectrum. The photon-induced evolution of H2 was remarkably enhanced using the prepared Ni-rGO/TiO2 nanocomposite. Furthermore, the optimum ratio of rGO: TiO2: Ni in the hybrids was 10:1:4, while the higher Ni ratio would decrease the photocatalytic activity. The stability of the photocatalyst was also verified during 8 cycles of photocatalytic reactions. The kinetic study revealed the nature of the integrated reaction and the controlling step governing the reaction sequence. .

We investigated the radioclinical outcomes of naviculectomy and limited/tailored soft-tissue releases in a short series of ambulatory children with complex/intractable congenital vertical talus subsets namely neglected, multiple operated and recurrent patients. We postulated that this technique will yield satisfactory radioclinical outcomes and minimal complications because it avoids extensive surgical release/trauma that is otherwise classically recommended for complex congenital vertical talus (CVT). The cohort consisted of five -four boys, one girl- complex CVT children with neglected, multiple operated and/or recurrent subsets. Patients were included if manipulative casting techniques were deemed unlikely to produce a plantigrade foot. Patients underwent naviculectomy with variable on-demand limited soft tissue releases. Two patients had bilateral affection and two had a non-idiopathic aetiology. The mean age was 5.2 years (4 to 6.25) and mean follow-up was 2.3 years (1 to 3). We reported satisfactory outcomes as per foot posture, function, overall parent satisfaction including pain and radiography per lateral views of talar-axis-first metatarsal base angle on the short/intermediate term. Whereas manipulative casting is unlikely to yield lasting outcomes in ambulatory children with complex subsets of CVT, extensive surgical soft-tissue releases have unfavourable long-term complications. As a substitute, naviculectomy as a form of resection arthroplasty created a practical and affordable third way between manipulative casting with minimally invasive surgery and the extensive surgical soft tissue releases on the short/intermediate term.

This article examines the impact of some system parameters on an industrial system composed of two dissimilar parallel units with one repairman. The active unit may fail due to essential factors like aging or deteriorating, or exterior phenomena such as Poisson shocks that occur at various time periods. Whenever the value of a shock is larger than the specified threshold of the active unit, the active unit will fail. The article assumes that the repairman has the right to take any of two decisions at the beginning of the system operation: either a takes a vacation if the two units work in a normal way, or stay in the system to monitor the system until the first system failure. In case of having a failure in any of the two units during the absence of the repairman, the failing unit will have to wait until the repairman is called back to work. We suppose that the value of every shock is assumed to be i.i.d. with some known distribution. The length of the repairman’s vacation, repair time, and recall time are arbitrary distributions. Various reliability measures have been calculated by the supplementary variable technique and the Markov’s vector process theory. At last, numerical computation and graphical analysis have been given for a particular case to validate the derived indices.

Egyptians face a significant challenge in meeting the growing population's water needs for agriculture and food production. To address this, policymakers and researchers have implemented the National Great Project for Lining and Rehabilitation of All Open Canals of the Irrigation Network to reduce irrigation water losses through seepage, evaporation, and evapotranspiration. The current field study evaluates water losses from the Al Maanna canal network in Assiut governorate, Middle Egypt, using empirical formulas and field ponding methods. The obtained results indicated that the Moleth-Worth formula is more compatible and gives results that are in good agreement with the field measurements carried out. The estimated seepage losses from the existing, distorted Al Maanna canal network using the Moleth-Worth formula and field ponding method were about 2.07 and 2.20 million m3/month, respectively. Also, the calculated maximum evaporation and evapotranspiration losses were about 0.086 and 1.133 million m3/month, respectively. Consequently, the total water losses might be about 3.42 million m3/month, representing nearly 13.63% of the Al Maanna canal’s total discharge. After completing the lining process, seepage losses from lined canals were determined to be only about 0.472 million m3/month using the ponding method, while evaporation and evapotranspiration losses will be significantly decreased after canal rehabilitation. Hence, lining the Al Maanna canal network can decrease the total water losses by about 84%, which is sufficient to recommend and encourage the lining processes where the value of the gained quantities of water exceeds all the implementation expenses, in addition to other moral, cultural, and environmental gains.

Longer operating time in radical prostatectomy may escalate the risk of perioperative complications. Various factors like cancer extent, procedure’s level of difficulty, habitus and previous surgeries may lengthen robotic assisted radical prostatectomy (RARP) and therefor compromise outcomes. Objective: this study investigates the influence of operating time on outcomes after RARP in real life settings in a monocentric single surgeon study. Methods: 500 consecutive patients who underwent RARP between April 2019 and August 2022 were included. Patients were divided in three groups. Short (n=157; 31.4%) under or equal to 120 minutes, average (n=255; 51%) between 121 and 180 minutes, long (n=88; 17,6%) above 180 minutes console-time. Demographic, baseline and perioperative data were analyzed and compared between groups. Univariate logistic regression was completed to investigate the association between console-time and outcomes and to predict factors which may prolong surgery. Results: hospital stay and catheter days were significantly longer in group 3 with medians 6 and 7 days (p<0.001 and <0.001, respectively). Those findings were confirmed in univariate analysis, p=0.012 for Catheter days and p<0.001 for Hospital stay. Moreover, major complications were higher in patients with longer procedures p=0.008. Prostate volume was the only predictor for prolonged console time (p=0.005). Conclusion: RARP is a safe procedure and most patients will be discharged uneventfully. Yet longer console-time is associated with longer hospital stay, catheter days and major complications. Caution has to be taken in large prostate to avoid longer procedures, which may prevent postoperative advert events.

This work aims to describe the early life history and the length frequency distribution of larval stages of three mesopelagic species collected near coral reef areas in the Red Sea. Larvae were collected monthly using a plankton net (500 µ) from three coastal coral reef areas surrounding Sharm El-Shekikh on the Egyptian Red Sea coast between January and December 2015. The identification of larvae was based on the author’s experience and other literature. The larvae of this species were divided into preflexion, flexion, and postflexion based on the flexion of the notochord and they were also categorized according to their size into relevant size classes. Mesopelagic fishes were represented in the collection by four species belonging to four families; Vinciguerria mabahiss (Family: Phosichthyidae), Benthosema pterotum (Family: Myctophidae), Astronesthes martensii (Family: Stomiidae; subfamily: Astronesthidae) and Trichiurus sp. (Family Scombridae). In general, a total of 3678 larvae were collected, of which 1191 belonged to mesopelagic species. The most abundant species was V. mabahiss with 677 larvae that constituted 18% of total larvae collected. The second most abundant species was B. pterotum that was represented by 485 larvae (13%). A. martensii was represented by the lowest number of larvae (29 larvae, 2%). Most larvae of the three species were in preflexion stage and more abundant in the cooler months of the year between November and April. The high number of preflexion larvae at the time may indicate the spawning of the three species in the colder times of the year.

Background: Nutritional rickets is still considered as a global health problem especially in low-resource countries and immigrant societies of developed countries. Generalized skeletal deformities including angular knee deformities as genu varum and genu valgum are prominent features of nutritional rickets. Angular knee deformities can cause gait difficulties. However, the true remodelling potential of the healed knee deformities is largely unknown to the pediatric and orthopedic community. Aims: The primary objective of this study protocol is to investigate the natural history of disease in regard to the remodelling potential of angular knee deformities in children and adolescents with healed nutritional rickets. And determine the potential patient- and deformity-related factors that are associated with a favorable deformity remodelling as age and sex of patients and type, severity, laterality of deformities etc. Methods: This will be a prospective observational analytical cohort natural history of disease study. A minimum of at least 140 knees with healed nutritional rickets and angular knee deformities will be observed at regular three-monthly intervals over a period of at least one year. We will report two outcome variables namely; clinical and radiological tibio-femoral angle. And independent patient and deformity-related variables as age, sex, deformity type, severity and laterality. Inferential statistics namely bivariate and multivariate analysis will be employed accordingly to identify the relation between outcome variables and the different independent variables. Ethics and dissemination: This protocol study has been approved by the institutional research ethics committee. Results will be presented at conferences and submitted to relevant international and society publications. Authors will also communicate the results to their scholarly networks and post them on scholarly networking sites. Conclusions: This study has the potential for improving the decision-making process as to which patients deserve conservative treatment and which deserve surgical deformity correction. Results are expected to have an impact on the clinical practice of pediatricians, orthopedic surgeons and family physicians alike.

Plants especially in their natural habitat are considered part of a rich ecosystem that includes many various microorganisms in the soil. The current study aimed to identify the bacterial profile of agriculture-related soil samples using the metabarcoding technique to compare and explore relevant rhizosphere bacteria associated with plant cultivations in newly reclaimed land and habitual cultivated ones. Total environmental DNA was extracted from rhizosphere and non-cultivated samples derived from three land types in Egypt. The bacterial 16S rDNA was amplified and sequenced by NGS technology to profile each sample. The microbial profile was characterized by statistical and literature-based methods. Among all samples, the most identified phyla were Actinobacteriota (28%), followed by Proteobacteriota (26%), Firmicutes (14%), Ac-idobacteriota and Chloroflexi (7%), Gemmatimonadota (5%), Bacteriodota and Crenarchaeota (3%), and Myxococcota (2%), in addition to 37 other phyla with <1% counts. A total of 74 OTU was unique to the plant rhizosphere area and classified as Bacteriodota (5.1%:0.3%), Firmicutes (2.4%:0.1%), and Proteobacteria (3.5%:2%) phyla in agriculture and reclaimed lands, respectively. Moreover, the rhizosphere profile included a large portion of uncultured and unidentified bac-terial species, which opened a window to further analysis. Our analysis provides a key Knowledge about the rhizosphere microbiome and highlights its possible use to create microbial-based bi-ofertilizers targeting plant performance in contrast to traditional fertilizers and their side effect on the agriculture sector.

The deployment of Artificial Intelligence (AI) systems in decentralized environments is on the rise, yet representation of shared conceptualization in such scenarios remains a challenging issue. The absence of a shared understanding can lead to suboptimal performance of AI systems and hinders the ability to comprehend the knowledge and beliefs of agents in the domain. This paper proposes a formal model for modeling conceptualization in AI systems that integrates ontology, epistemology, and epistemic logic. The model aims to address the gap in representing shared conceptualization in decentralized environments and enhance the performance of AI systems operating in such environments. The proposed model is a hybrid structure that blends extensional and intensional structures and leverages logic-based languages for modeling purposes. A case study in the healthcare sector is presented to illustrate the application of the proposed model. The study contributes to the existing literature by providing a formal model for representing shared conceptualization in decentralized environments, which can be utilized to optimize the performance of AI systems in these environments.

In the present study, fish were exposed to sub-lethal doses of CuONPs (68.92 ± 3.49 nm) (10, 20, and 50 mg/L) for a long exposure period (25 days). Compared to the control group (0.0 mg/L CuONPs), a significant dose-dependent elevation in blood urea and creatinine values, serum alanine transaminase, aspartate transaminase, and alkaline phosphatase enzyme activities were evident in CuONPs-exposed groups (P &lt; 0.05). Fish exposure to 50 mg/L CuONPs significantly upregulated the transcription of pro-inflammatory cytokines (tumor necrosis factor-alpha, interleukin-1beta, interleukin 12, and interleukin 8), heat shock protein 70, apoptosis-related gene (caspase 3), and oxidative stress-related (superoxide dismutase, catalase, and glutathione peroxidase) genes in liver and gills of the exposed fish in comparison with those in the control group (P &lt; 0.05). Moreover, varying histopathological injuries were noticed in the hepatopancreatic tissues, posterior kidneys, and gills of fish groups correlated to the examined exposure dose of CuONPs. In summary, our results provide new insights and helpful information for better understanding the mechanisms of CuONPs toxicity in Nile tilapia at hematological, molecular levels, and tissue levels.

Rising fuel costs, significant air pollution, and the need to mitigate the negative consequences of oil consumption have diminished the relevance of traditional vehicles. This shift encourages the adoption of safer, more efficient, and eco-friendly transportation alternatives, such as fuel cell, electric, and hybrid vehicles. Brushless direct current motors are gaining popularity due to their high efficiency, power factor, torque, and controllability. By 2030, Brushless Direct Current motors are expected to replace conventional motors as the standard for power transfer, especially in dynamic applications like automobiles, more electric aircraft. This study explores a control technique to improve real-time control of brushless direct current motors in electric vehicles It presents speed control of these system for electric vehicle applications and an overview of electric vehicle technologies. A model for the 120-degree mode was developed using electrical and mechanical equations in MATLAB/Simulink. Three scenarios were examined to assess the potential of controlling brushless direct current motors using constant and dynamic speed and torque. The actual value reached the reference value in the first two scenarios.

Background: The presence of a skilled health professional at delivery is critical to reduce infant and maternal mortality. Health development plans and strategies, especially in developing countries, consider equity in access to maternal health care services as a priority. This study aimed to measure and analyze the inequality in the use of skilled births attendance services in Mauritania. The study identifies the inequality determinants and to explore its changes over the period 2007–2015. Methods: The concentration curve, concentration index, decomposition of the concentration index and Oaxaca-type decomposition technique were performed to measure socio-economics related inequalities in skilled birth attendance services utilization and identify contribution of different determinants to such inequality as well as the changes in inequality overtime using data from Mauritania Multiple Indicator Cluster Surveys (MICS) 2007, 2011 and 2015. Results: The concentration index for skilled birth attendance services utilization dropped from 0.6324 [P < 0.001] in 2007 to 0.5852 [P < 0.001] in 2015. Prenatal care, household wealth Status and urban-rural location made the biggest contributions to socio-economic related inequalities. Decomposition of the concentration index and Oaxaca-type decomposition revealed changes prenatal care, rural-urban location made positive contributions to decline in inequality. However, alternation in household wealth score, woman’s age, her education level and the number of living children pushed the equality toward deterioration. Conclusion: Clearly, the pro-rich inequality in skilled birth attendance is high in Mauritania despite a slight decrease during the study period. Policy actions on eliminating urban-rural and wealth index disparity should target increase access to skilled birth attendance. Multisectoral Policy actions is needed to improve social determinants of health and to remove health system bottlenecks including socio-economic empowerment of women and girls, enhancing availability and affordability of Reproductive and Maternal Health commodities, improving availability of obstetrical providers in rural area, promoting a better distribution and quality of health infrastructure particularly health posts and health centers, and replacing user fees by an equitable, efficient and sustainable financing scheme under an universal health coverage vision.

Maxillofacial fractures are a prevalent occurrence, and the widespread use of miniplates to stabilize and secure these fractures during surgery is common. However, the post-surgical fate of these miniplates remains a subject of contention among surgeons. Some advocate for their removal, while others suggest leaving them in place. This study aims to perform an extensive meta-analysis of pertinent studies to ascertain the destiny of miniplates employed in maxillofacial surgery and discuss the consequences of either their extraction or retention. To execute this meta-analysis, an exhaustive search was conducted across multiple databases, encompassing PubMed, Scopus, and Google Scholar. Keywords such as "titanium miniplates," "screws," "maxillofacial surgery," "complications," and "removal" were utilized to identify pertinent studies. The search was constrained to studies published between 1989 and 2022. The analysis encompassed only studies reporting outcomes related to miniplates in maxillofacial surgery, including complication rates and removal frequencies. Eleven studies conformed to the inclusion criteria and were incorporated into the meta-analysis, encompassing a total of 2240 patients. All the studies had a retrospective design, with the largest study involving 800 patients. The overall complication rate was determined to be 13.3%. The most prevalent reasons for miniplate removal included patient preference, tooth extraction, and infections. The average time span for miniplate removal was 10.7 months, with the most prolonged reported duration being 24 years. These findings imply that immediate removal might not be imperative in the majority of instances. In conclusion, our meta-analysis underscores the necessity of removing miniplates in cases where hardware leads to a variety of complications and physical discomfort. Principal factors driving plate removal included patient requests, tooth extractions, and infections. Ordinarily, plate removal took place within the span of 6 to 12 months, with the mandible being the most frequent site for removal. These findings accentuate the significance of extended monitoring to assess the trajectory of miniplates in maxillofacial surgery and provide valuable insights for future clinical decisions. To validate these conclusions and gain deeper insights into the factors influencing plate removal in maxillofacial surgery, further research with larger participant cohorts and standardized outcome reporting is imperative.

This study compared the Biodentine (BD) and MTA in repair of furcation perforation (FP) in a dog model in terms of inflammatory cell count and new hard tissue formation through histological and immunohistochemical evaluations. Ninety six teeth in six adult mongrel dogs were divided according to the time of repair into two groups (48 teeth/3 dogs each); immediate and delayed repair of the induced FP. Each group was divided into three subgroups (16 teeth each) according to the evaluation periods; 1, 2, and 3 months. Each subgroup was further subdivided into four subdivisions according to the material used; MTA (6 teeth), Biodentine (6 teeth), negative control (2 teeth) and positive control (2 teeth). In experimental and positive control samples, the teeth were instrumented and obturated then, a FP was performed. The perforations were sealed according to the groups and subdivisions. Histopathology and immunohistochemical analysis using Osteonectin antibodies were performed for assessment of the inflammatory cell count and new hard tissue formation. In all groups and subgroups, there were no significant differences between MTA and BD in the inflammatory cell count and new hard tissue formation (P>0.05). Biodentine can alternate the MTA as a FP repair material.

African indigenous herbs and medicinal plants are extensively reported for their protective and therapeutic potential against Diabetes. However, most of the constituent phytochemicals that may account for the therapeutic activity are largely uninvestigated. Exploring novel phytochemical–target interactions in silico could help to provide useful insights into the mechanism underpinning the biological activities of these plants and their constituent phytochemicals. The aim of this study was to explore the interactions of terpene struc-tures previously reported from selected African antidiabetic with two emerging drug targets in diabetes. Structure-based virtual screening was used to screen 107 terpene structures against DPP-4 and PTP1B enzymes. The MD simulation, MM-GBSA free energy calculation and DFT were used to clarify the inter-actions of the in silico hits with the target enzymes. Molecular docking, post-docking Prime MM-GBSA analysis revealed the top terpenes with high binding affinity with the active site regions of DPP-4 and PTP1B. Ensemble docking revealed three triterpenes viz: cucurbitacin B (T1), 6-Oxoisoiguesterin (T4) and 20-Epi-isoiguesterinol (T2) as in silico hits which exhibit strong interaction potential with critical residues that define the catalytic triad (Ser630 and His740); oxyanion cavity (Ser631); hydrophobic S1 pocket (Tyr662) and the charged S2 pocket (Arg125) in the active site region of DPP-4. The interactions of these compounds with DPP-4 exhibited structural stability and conformational flexibility during 100 ns full atomistic MD simulation as indicated by the structure dynamics parameters including RMSD, RoG, SASA and hydrogen bond number. The post-MD MM/GBSA calculations further revealed the stability of the triterpene-DPP-4 complexes. Furthermore, Frontier molecular orbital calculations showed that, the triterpenes possess high interaction potential with the enzyme. The triterpenes showed desirable ADMET properties and drug-likeness. Therefore, cucurbitacin B, 6-Oxoisoiguesterin and 20-Epi-isoiguesterinol are recommended for experimental validation.

Invasive fungal infections, notably candidemia, have been associated with COVID-19. The epidemiology of candidemia has significantly changed during the COVID-19 pandemic. We aim to identify the microbiological profile, resistance rates, and outcomes of COVID-19 associated candidemia (CAC) compared to patients with candidemia not associated with COVID-19. We retrospectively collected data on patients with candidemia admitted to the American University of Beirut Medical Center between 2004 and 2022. We compared the epidemiology of candidemia during and prior to the COVID-19 pandemic. Additionally, we compared the outcomes of critically ill patients with CAC to those with candidemia without COVID-19 from March 2020 till March 2022. Among 245 candidemia episodes, 156 occurred prior to the pandemic and 89 during the pandemic. Of the latter, 39 (43.8%) were CAC, most of which (82%) were reported from intensive care units (ICU). Non-albicans Candida (NAC) spp. were predominant throughout the study period (67.7%). Candida auris infection was the most common cause of NAC spp. in CAC. C. glabrata had decreased susceptibility rates to fluconazole and caspofungin during the pandemic period (46.1% and 38.4% respectively). Mortality rate in the overall ICU population during the pandemic was 76.6%, much higher than the previously reported mortality of candidemia from previous studies at our center. There was no significant difference in 30-day mortality between CAC and non-CAC (75.0% vs 78.1%; P =0.76). Performing ophthalmic examination (P = 0.002), CVC removal during the 48 hours following the candidemia (P = 0.008) and identifying the Candida spp. (P = 0.028) were significantly associated with a lower case-fatality rate. The epidemiology of candidemia has been significantly affected by the COVID-19 pandemic at our center. Rigorous infection control measures and proper antifungal stewardship are essential to combat highly resistant species like C. auris.

Non-enzymatic glucose sensing is a crucial field of study because of the current market demand. This study proposes a novel design of glucose sensor with enhanced selectivity and sensitivity by using graphene Schottky diodes, which is composed of Graphene/Platinum Oxide/n-Silicon heterostructure. The sensor was tested with different glucose concentrations and interfering solutions to investigate its sensitivity and selectivity. Different structures of the device were studied by adjusting the platinum oxide film thickness to investigate its catalytic activity. It was found that the film thickness plays a significant role in the efficiency of glucose oxidation and hence in overall device sensitivity. Moreover, theoretical investigations were conducted using Density Function Theory (DFT) to better understand the detection method and the origins of selectivity. The working principle of the sensors puts it in a competitive position with other non-enzymatic glucose sensors. DFT calculations provided a qualitative explanation of the charges distributed across the graphene sheet within a system of a platinum substrate with D-glucose molecules above. The proposed graphene/PtO/n-Si heterostructure has proven to satisfy these factors, which opens the door for further developments of more reliable non-enzymatic glucometers for continuous glucose monitoring systems.

New Schiff base ofN'-((E)-3,3-diphenyl-2,3-dihydro-1H-inden-1-ylidene)-2-((Z)-2-oxoindolin-3-ylidene)hydrazine-1-carbothiohydrazide (HL) and its Co(II),Ni(II), Fe(III), Cu(II), Cd(II), Zn(II) and Mn(II) complexes were created, isolated, and characterized by analytical analysis in good yields of 60 to 90%, UV–Vis, magnetic measurements, molar conductivity, and FT-IR. Additionally, mass spectrometry was used to examine the new ligand complexes' structural characteristics.1H NMR spectroscopy and elemental analysis. Depending on the electronic spectra and magnetic susceptibility measurements, these complexes are predicted to have octahedral molecular geometry. As an example, the quantum chemical properties, bond lengths, and bond angles were discussed. The structural formula for the examined ligand was improved using the Gaussian09 tool. The DFT/B3LYP method was used to calculate the energy gaps and other crucial theoretical features. The prepared hydrazine ligand complexes Co (II), Ni (II), Fe (III), Cu (II), Cd (II), Zn (II) and Mn (II) complexes were evaluated for its antimicrobial properties. As antimicrobial agents, it was found that the organic ligand was less biologically active than the targeted complexes. Gram positive bacteria (3ty7-Staphylococcus), Gram negative bacteria (3t88-Escherichia coli), and fungi (5k04-Candida albicans) all have crystal structures that interact well with the chemicals in the title, according to molecular docking.

In this work, we offer a novel and accurate method in order to find the solution of the linear differential equations over the intervals [0, 1) based on the generalization of Legendre wavelets. The mechanism is still upon workable implementation of the operational matrix of integration and its derivatives. This method reduces the problems into algebraic equations via the properties of generalized Legendre wavelet (GLW) together with the operational matrix of integration. The function approximation has been picked out in such a way so as to enumerate the connection coefficients in an facile manner. The proposed numerical technique, based on the GLW, has been examined on three linear problems as a consequence of this investigation. The outcomes have shown that this method, as opposed to some other existing numerical and analytical methods, is a very useful and advantageous for tackling such problems.

For bounded unit interval, we propose a new Kumaraswamy generalized (G) family of distributions from a new generator which could be an alternate to the Kumaraswamy-G family proposed earlier by Cordeiro and de-Castro in 2011. This new generator can also be used to develop alternate G-classes such as beta-G, McDonald-G, Topp-Leone-G, Marshall-Olkin-G and Transmuted-G for bounded unit interval. Some mathematical properties of this new family are obtained and maximum likelihood method is used for estimating the family parameters. We investigate the properties of one special model called a new Kumaraswamy-Weibull (NKwW) distribution. Parameter estimation is dealt and maximum likelihood estimators are assessed through simulation study. Two real life data sets are analyzed to illustrate the importance and flexibility of this distribution. In fact, this model outperforms some generalized Weibull models such as the Kumaraswamy-Weibull, McDonald-Weibull, beta-Weibull, exponentiated-generalized Weibull, gamma-Weibull, odd log-logistic-Weibull, Marshall-Olkin-Weibull, transmuted-Weibull, exponentiated-Weibull and Weibull distributions when applied to these data sets. The bivariate extension of the family is proposed and the estimation of parameters is given. The usefulness of the bivariate NKwW model is illustrated empirically by means of a real-life data set.

The integration of robotic devices into healthcare settings for rehabilitation purposes represents a rapidly advancing field with significant benefits for both therapists and patients. However, standalone robot systems face limitations such as inefficient processing of patient data and logistical challenges for patients, such as travel time to rehabilitation centers. To address these shortcomings, this paper proposes the integration of cyber-physical systems into rehabilitation robotics. Cyber-physical systems leverage network connectivity and real-time data processing to enhance the efficiency and convenience of robot-based rehabilitation. By seamlessly integrating sensors, actuators, and computational algorithms, cyber-physical rehabilitation systems empower therapists to more effectively treat patients by providing actionable insights derived from comprehensive data analysis. This enables therapists to tailor treatment plans precisely to each patient’s unique needs, ultimately leading to improved outcomes. Additionally, cyber-physical rehabilitation systems facilitate remote monitoring and intervention, allowing therapists to oversee patient progress and make timely adjustments to treatment protocols without the need for in-person visits. This not only saves patients valuable time and resources but also ensures continuity of care, particularly for individuals residing in remote or underserved areas. Furthermore, cyber-physical rehabilitation systems enable collaborative decision-making by facilitating communication and information sharing among healthcare professionals, further enhancing the quality and efficacy of rehabilitation services. In summary, integrating cyber-physical systems into rehabilitation robotics represents a significant advancement in leveraging technology to optimize patient care and outcomes, promising to revolutionize rehabilitation therapy.

Early detection of cancer increases the probability of recovery. This paper presents an intelligent decision support system (IDSS) for the early diagnosis of cancer based on gene expression profiles collected using DNA microarrays. Such datasets pose a challenge because of the small number of samples (no more than a few hundred) relative to the large number of genes (on the order of thousands). Therefore, a method of reducing the number of features (genes) that are not relevant to the disease of interest is necessary to avoid overfitting. The proposed methodology uses the information gain (IG) to select the most important features from the input patterns. Then, the selected features (genes) are reduced by applying the grey wolf optimization (GWO) algorithm. Finally, the methodology employs a support vector machine (SVM) classifier for cancer type classification. The proposed methodology was applied to two datasets (Breast and Colon) and was evaluated based on its classification accuracy, which is the most important performance measure in disease diagnosis. The experimental results indicate that the proposed methodology is able to enhance the stability of the classification accuracy as well as the feature selection

This work aims to investigate the impact of chemical treatment of Juncus acutus fibers on the hygric and mechanical performances of an innovative bio-sourced clay-sand-Juncus acutus fibers composite. This lightweight specimen has been produced from a mixture of 60 % natural clay and 40 % sand by mass, as a matrix, and reinforced with different amounts of Juncus fibers. The fibers were used as a partial replacement of sand in mixture by volume at 0 % (Control Specimen), 5 %, 10 %, and 20 %. In order to enhance the fiber-matrix interfacial bound, the raw fibers have undergone an NaOH alkali treatment with different concentrations of 1, and 2 wt. %. Morphological and mineralogical evaluation based on SEM micrographs and EDX analyses revealed that, the alkaline concentration of 1 wt. % is the optimized one for natural fiber surface modifications (removal of impurities without any surface damage). This optimal concentration is confirmed by tensile strength tests, showing that the treated fibers with this alkali solution presents the higher tensile stress value of 81.97 MPa, compared to those of treated fibers with 2 % NaOH (74.45 MPa), and the untreated fibers (70.24 MPa). However, mechanical test-results highlighted the benefit effect of the fiber alkali treatment on both the compressive and flexural strengths, particularly for fiber contents of 5 % and 10 %, which corresponds to a strengthening rate of 25 % and 30 %, respectively. Results also showed that the sample containing treated fibers exhibited a better moisture regulating property than that produced with untreated fibers. The specimens are classified as excellent hygric regulator based on their moisture buffer performance (MBV > 2 g/(m2.%RH)), according to NORDTEST classification. Results also indicated that the capillary water absorption and the apparent moisture diffusivity of composites was lowered due to high fiber-matrix interfacial bound, after fiber treatment. Consequently, the composite with treated fibers is less diffusive compared to that with untreated fibers, and thus expected to be more durable in a humid environment. These results were confirmed by morphological analysis of fibers-matrix interfacial transition zone.

In this paper, we investigate the accuracy and robustness of three classes of methods for solving two-phase incompressible flows on a staggered grid. Here, the unsteady two-phase flow equations are simulated by finite volumes and penalty methods using implicit and monolithic approaches (such as the augmented Lagrangian and the fully coupled methods), where all velocity components and pressure variables are solved simultaneously (as opposed to segregated methods). The interface tracking is performed with a Volume-of-Fluid (VOF) method, using the Piecewise Linear Interface Construction (PLIC) technique. The home code Fugu is used for implementing the various methods. Our target application is the simulation of two-phase flows at high density and viscosity ratios, which are known to be challenging to simulate. The resulting strategies of monolithic approaches will be proven to be considerably better suited for these two-phase cases, they also allow to use larger time step than segregated methods.

In this paper we introduce the concept of Nano Beta Closure, Nano Beta Interior and study the relationship between them also study some of their properties. Based on these notions we introduced the topological Approach to Decision Making and Its Application in the Medical Field" which describes the use of topological methods in decision-making, specifically through the utilization of nano beta closure and nano beta interior. These mathematical tools are applied in the medical field to improve diagnostic accuracy and aid in treatment planning. The authors demonstrate the effectiveness of this approach through a case study on the diagnosis of Chronic Kidney. The results show that the topological approach using nano beta closure and nano beta interior provides a reliable and accurate method for medical decision-making. Finally, we introduce a medical application for disease groups patients of with chronic kidney. To identify the main causative agent of kidney disease. where using this approach, the medical team can identify the specific areas of the kidney that are affected by the infection, as well as the extent of damage and any potential complications. This information is used to create an individualized treatment strategy that is customized to meet the specific requirements of the patient. and medical history. We write an algorithm that can be a helpful tool for doctors to utilize in diagnosing infection disease Chronic Kidney infections. By utilizing this approach, clinicians can provide accurate diagnoses, develop effective treatment plans, and ultimately improve patient outcomes. finally, we show that fractals hold significant importance in future nano topological generation of the human factor. Their unique properties and self-similar patterns offer insights into the complex organization of biological systems and provide a foundation for designing advanced Nanosystems.

The variability of ozone over Egypt has been studied in this work. Higher values of coefficient of variation (COV) at eight stations occur at winter while lowest values occur at summer. The COV is function of latitude in annual, winter and spring where it decreases gradually from the north to south of Egypt. The trend analysis of ozone over the eight stations indicates negative trends over northern stations for both annual and seasonal time series with the greatest one at winter. The horizontal distribution of ozone trend values is negative over all Egypt in winter while it positive over middle and south Egypt in the other seasons. The long-term variability of the behavior of the annual ozone shows positive trend values in ozone are the dominant features during the period 1979- 1989 at the most stations. Negative trend values in ozone are the dominant features during the period 1990- 2014 at all stations. The Mann–Kendall test confirms that there is an abrupt change towards decreasing of ozone occurs in 1981, 1984, 2012, 1999, 2000, 1998 and 2010, while a change towards increasing of ozone appears in 2006, 2014, 1993 and 1989.

Forty-five of intact three sheep breeds (Awassi, Harri, and Najdi) were used in this study (15 animals of each breed), with weight ranged from 23.40 to 25.87 kg. Five animals from each group at the end of growth trial were used for digestibility and nitrogen balance trials. The three groups of sheep had effect (p > 0.05) in the final live weight (FLW). Average daily feed intake (ADI), average daily gain (ADG) and feed conversion ratio (FCR) were significantly (p < 0.05) different among the three groups. For digestibility coefficients, the three breeds of sheep had no effect (p > 0.05) in dry matter (DM), organic matter (OM), crude protein (CP), crude fiber (CF), nitrogen free extract (NFE), neutral detergent fiber (NDF) and acid detergent fiber (ADF). In the similar approach, no significant differences were founds among three breeds of sheep in digestible organic matter, digestible of crude protein, total digestible nutrients and nitrogen retention. The current study concluded that the sheep breeds affected average daily feed intake, average daily gain and feed conversion ratio (FCR). Awassi breed showed the best of average daily gain and feed conversion ratio followed by Najdi then Harri breeds. The breed of sheep had no effect on digestibility coefficients and nitrogen retention.

It is at the chemistry-biology interface that this work that we have carried out takes place. Indeed, the expected goal is to develop simple molecules, capable of activating the catalytic action of certain metalloenzymes such as tyrosinase. The official name of an enzyme includes the type of reaction catalyzed, the name of the substrates involved. In this work, we carried out the study of the catalytic activity of the complexes of organotin carboxylates synthesized vis-à-vis the oxidation of 3,5-di-tert-butylcatecchol. The results obtained show that the various complexes exhibit good catalytic activity for the oxidation of 3,5-di-tert-butylcatecchol under mild conditions. The complexes that showed good catalytic activity are the compounds C1 and C2.

Learning dental procedures is a complex task involving the development of fine motor skills. The reported use of theories and/ or evidence for designing learning activities to develop the fine motor skills needed for dental practice is limited. The aim of this review is to explore the available body of knowledge related to learning fine motor skills in dentistry. Evidence from studies investigating motor skill learning highlights the negative impact of self-focus and self-regulation on learning outcomes, particularly during the early stages of learning. The development of activities and schedules that enable novices to demonstrate characteristics similar to experts, without the reported long period of ‘deliberate practice’, is clearly of value. Outcomes of learning implicitly are important in dentistry because working under stressful conditions is common, either during undergraduate study or in practice. It is suggested that learning implicitly in the simulation stage can reduce disrupted performance when transitioning to clinical settings. Therefore, further investigation of effective methods for learning dental fine motor skills is indicated, using approaches that result in robust performance, even under stressful conditions.

Although carbon (C) efflux from soils treated with organic wastes was widely covered in temperate and cold regions, still such data is not sufficient from arid and semi-arid regions. Saudi Arabia produces more than 335,000 tons/year of cow manure (CM), this CM either left as raw manure or being composted. The application of high C/N amendments is expected to increase soil organic carbon and reduce CO₂ fluxes. A 90-day incubation experiment was conducted to study CO₂ efflux, organic C microbial biomass C, available NH₄+and NO₃-when added to agricultural soil. Six manure types were added: cow manure, cow manure compost, cow manure biochar, cow manure stripped ammonia at pH 12 with a temperature of 95oC, cow manure stripped ammonia at pH 9 with a temperature of 95oC and control. The application of CM resulted in a considerable increase in soil available nitrogen, CO₂ efflux compared to other treatments. Cow manure biochar showed the lowest CO₂ efflux. Cumulative CO₂ effluxes of cow manure effluents were lower than CM this possibly due to the relatively high C:N ratio of manure effluent. The content of, P, Fe, Cu, Zn and Mn were decreased as incubation time increased. microbial biomass C of cow manure stripped ammonia at pH 12 with a temperature of 95oC were increased at 7 and 60 days illustrating to temperature effect on the decomposing of manure materials.

Multi-receiver encryption enables a sender to encrypt a message and transmit the ciphertext to a set of authorized users, while no one out this group of authorized users can decrypt the message. Multi-receiver encryption is of great importance in many sectors such as broadcast communication, cloud computing, wireless communications, networking applications, e-voting, lottery, and medical applications. This paper proposes an efficient multi-receiver public key encryption scheme based on Lucas sequences. The results of the computational analysis show that, projected scheme is better against renown attacks and prevailing anonymous multireceiver algorithms

(1) Background: The present study was carried out to provide new information about the relation between angiogenesis, tumor stage Oral squamous cell carcinoma (OSCC); (2) Materials and methods: Thirty formalin-fixed paraffin embedded blocks were used, 10 of them were previously diagnosed as well differentiated OSCC, 10 moderate differentiated OSCC and 10 poorly differentiated OSCC. To determine the expression of CD31 and D2-40 proteins, streptavidin-biotin immunoperoxidase staining technique was used. The areas with the most vascular density (hot spots) were determined. The stained vessels were counted independently in intratumoral and peritumoral stroma in five areas of hot spot at ×400 magnification; (3) Results: Immunohistochemical staining using CD 31 protein showed that CD31-positive vessels in the peritumoral and intratumoral stroma subjacent to the malignant invading nests which was recorded highest values in poor differentiated OSSC followed by moderate differentiated OSSC then well differentiated OSSC. D2-40 expression was positive in lymphatic vessel in the peritumoral and intratumoral stroma subjacent to the malignant invading nests. Poorly differentiated OSSC tissue sections recorded the highest vessels count followed by moderate differentiated OSSC then well differentiated OSSC. There was statistically significant difference found between the three studied groups regarding CD31 and D2-40 levels. Also there was statistically significant positive correlation found between CD31 level and D2-40 level and vice versa; (4) Conclusion: CD31 and D2-40 are related to stage of OSCC and are consistent with angiogenesis in tumor progression.

Objectives: The present study was performed to compare between two different fixation techniques and evaluate the histopathological changes which occur in temporomandibular joint (TMJ) of the dogs after surgically induced unilateral subcondylar fracture. Methods: Twenty- One healthy beagle male dogs with a mean age of 30 months were used in the present study. One of these animals was sacrificed to study the normal histology of the dog TMJ. The rest of the animals (20 animals) were operated on to induce a displaced unilateral subcondylar fracture then, the animals were randomly equally divided into 2 groups. After surgery, 5 dogs of each group were sacrificed at 2 months after surgery (Short-Term), while the remaining 5 were sacrificed at 4 months after surgery (Long-Term). The heads were separated and fixed, oscillating saw was used to articulate the entire TMJ. Specimens were decalcified, then the specimens were washed, grossed and sectioned in a sagittal plane. Tissue sections of 4 um thick were cut and stained with Hematoxylin and Eosin to be studied microscopically. Results: In group I animals, at 2 months after surgery, there was a marked hypertrophy of the articular fibrous covering of the condylar head, while at 4 months after surgery, the articular fibrous covering appeared thinner than normal, with marked decrease in thickness of the articular cartilage layer. In group II, at 2 months after plate insertion, the articular fibrous covering became hypertrophic, and the articular cartilage was markedly reduced but it was of a uniform thickness, while at 4 months after subcondylar fracture and plate fixation, no significant changes could be detected either in thickness or structure of the articular fibrous covering. Conclusion: Based on this study, it is obvious that the plate fixation group gave the most favorable results, when compared with maxillomandibular fixation (MMF) group.

The aim of this paper is to analyze the five grand parks in Dubai, United Arab Emirates (UAE) and provide a geoprocessing approach to different aspects such as sport, health, leisure, recreation, and public wellbeing. The study uses a hybrid of qualitative and quantitative approach as methodology. Sustainability offerings, accessibility for people of determination and special needs, typology and the geolocations of the grand parks plays crucial role in residents’ wellbeing. The paper concludes with recommendations for Dubai government to design new and innovative approaches to manage wellbeing of urban public places into the leisure environment for residents.

In remote sensing applications, one of the key points is the acquisition, real-time pre-processing and storage of information. Due to the large amount of information present in the form of images or videos, compression of this data is necessary. Compressed sensing (CS) is an efficient technique to meet this challenge. It consists in acquiring a signal, assuming that it can have a sparse representation, using a minimal number of non-adaptive linear measurements. After this CS process, a reconstruction of the original signal must be performed at the receiver. Reconstruction techniques are often unable to preserve the texture of the image and tend to smooth out its details. To overcome this problem, we propose in this work, a CS reconstruction method that combines the total variation regularization and the non-local self-similarity constraint. The optimization of this method is performed by the augmented Lagrangian which avoids the difficult problem of non-linearity and non-differentiability of the regularization terms. The proposed algorithm, called denoising compressed sensing by regularizations terms (DCSR), will not only perform image reconstruction but also denoising. To evaluate the performance of the proposed algorithm, we compare its performance with state-of-the-art methods, such as Nesterov's algorithm, group-based sparse representation and wavelet-based methods, in terms of denoising, and preservation of edges, texture and image details, as well as from the point of view of computational complexity. Our approach allows to gain up to 25% in terms of denoising efficiency, and visual quality using two metrics: PSNR and SSIM.

Face milling is a well known commercial process highly used in heavy industries that consumes high amount of power. Besides power issue, modern manufacturing industries are aiming for per part cost reduction keeping the product quality unimpaired. Unexpectedly if the part is rejected in any stage of manufacturing, the cost of manufacturing dramatically increases. Major cause of part rejection is excessive tool wear that imparts poor surface profile or catastrophic tool failure that causes adherence of broken tool debris onto machined surface. Furthermore, the tool wear is associated with sliding distance (frictional distance) and the tool life quantifies the cost of tools. As such, from the perspective of manufacturing industries it is imperative to optimize the surface quality parameter, cost of part, power consumption, and material removal – this is exactly what is accomplished here. By this work, it is possible to conserve power consumption, produce parts with lower cost, manufacture with uncompromising surface quality and enhanced material removal rate. Moreover, as intermediate factors of interest, the influences of sliding distance, tool life and tool flank wear on the overall machining performance are evaluated. The multi-objective optimization by Grey Relational Analysis (GRA) revealed that for improved product performance and fast manufacturing (case 1) optimum results are: feed per tooth fz = 0.25 mm/tooth, cutting speed vc = 392.6 m/min and cutting length l = 0.5 mm; for resource conservation (case 2) the optimum results are: feed per tooth fz = 0.125 mm/tooth, cutting speed vc = 392.6 m/min, cutting length l = 0.5 mm.

The study of localized surface plasmons (LSPs) in nanoscale structures is an essential step towards identifying optimal plasmonic modes that can facilitate robust optomechanical coupling and deepen our understanding of light-matter interactions at the nanoscale. This paper investigates numerically, using the finite element method, LSPs modes in a design comprising two coupled nano-ridges deposited on a gold layer, with an interposing polymer spacer layer. Such a structure, usually referred to as particles-on-mirror, shows exquisite optical properties at the nanoscale. We first examine the LSPs modes of a single nano-ridge through the analysis of its scattering cross-section in the visible and infrared range. To enhance the plasmonic response, a thin polymer layer is placed at the middle of the ridge, which introduces additional LSPs modes confined within the former. Then, we extend the analysis to the dimer configuration, which exhibits more complex and enhanced plasmonic behavior compared to a single nano-ridge. In particular, the dimer configuration yields LSPs resonances with a quality factor enhancement of approximately threefold relative to single nano-ridge. Furthermore, the presence of the polymer layer within the ridges significantly improves plasmon field localization and quality factor. These findings underscore the potential of nano-ridge-based structures in advancing optomechanical coupling and plasmon-phonon interaction studies, offering valuable insights for the development of high-performance acousto-plasmonic devices. In particular, the proposed device could help significantly improve the design of nano-acousto-optic modulators operating in the visible or in the near infrared, that require enhanced light-photon coupling rate.

Cities are complex systems requiring urban design models that balance order and disorder. Collective creativity initiatives engage citizens in these processes, empowering bottom-up approaches that prioritize people and social well-being within urban development. This paper investigates an 'Urban Laboratory' as a case study, examining the potential of collective creativity to address urban complexity. The successful and ongoing project 'El Campo de Cebada' in Madrid, Spain, demonstrates how a community transformed a vacant lot into a vibrant social hub. The phases of this study include case selection, data collection, data analysis, and presentation of the results. This study identifies key enabling factors, including agents, management, social dynamics, infrastructure, and actions. These insights offer a methodological framework for designing future collaborative, resilient, and inclusive urban spaces, addressing the complex needs of communities within our cities.

Vertical wind speed extrapolation is a commonly used method that involves estimating wind speeds at various heights based on measurements taken at a specific height. In this study, we compared the short-and long-term extrapolation methods of wind parameters using data collected on site by anemometers at two different heights. We assessed the accuracy of these methods by calculating the statistical indicators for performance evaluation, and then determined the most appropriate model for the two types of vertical extrapolation. Additionally, we evaluated energy potential characteristics, as well as the statistical analysis of wind speed distribution and wind power density based on the Weibull and Rayleigh distribution. Our results indicated that the power law is the most suitable model for the short-term method, while the modified Mikhail model is the most appropriate for long-term extrapolation. We also found that the wind potential of this area is favorable for wind turbine integration.

Teeth segmentation plays a pivotal role in dental diagnosis, treatment, planning, and the development of computer-aided dental systems. It enables precise identification and analysis of dental structures, aiding in detecting dental abnormalities, measuring tooth dimensions, and assessing oral health conditions. Accurate teeth segmentation also facilitates the automation of dental workflows, leading to improved efficiency and reduced human error. Artificial Intelligence (AI) has witnessed rapid advancements, with various approaches developed or enhanced. While Convolutional Neural Networks (CNNs) have been widely used in medical image segmentation, the U-Net architecture has emerged as a standout performer due to its exceptional segmentation capabilities. This paper presents a proof of concept for the Attention U-Net architecture, as previously used in [1], applied to teeth segmentation. The study demonstrates the superior performance of this network in accurately segmenting teeth using a newly available benchmark dataset called Tufts Dental X-Ray Dataset. When trained and tested on 10-fold cross-validation, the model achieved an average dice coefficient of 95.01%, intersection over union of 90.6%, and pixel accuracy of 98.82%. These scores surpass those of all other networks implemented on the same dataset. By leveraging the Attention U-Net architecture, our research showcases the potential of advanced AI techniques in dental radiography. The findings contribute to the ongoing efforts to develop automated systems to assist dental professionals in their clinical practice.

The solar water heater must be integrated into future residential buildings as the main energy source, which will subsequently reduce the energy cost of water heating. An original configuration for efficient Domestic Hot Water "DHW" storage tank is developed and experimentally evaluated under Saharan climate. This novel DHW configuration includes a hybrid (solar and electric) energy system with a flat plate solar collector coupled with an electric heater. Additionally, phase change material "PCM" mixture that is composed of paraffin wax and animal fat with a melting temperature between 35.58°C and 62.58°C and latent heat between 180 and 210 kJ/kg is integrated into this novel tank configuration. The experimental results indicated that hot water production by using latent heat storage could be economically attractive. In this proposed configuration, one liter of hot water may cost around 0.1362 DZD/liter (i.e., 0.00096 US$/liter) compared to 0.4431 DZD/liter for the conventional water heater, an average energy cost savings of 69.26%. On a yearly basis, the average energy cost savings may reach up to 80.25% if optimal tilt for the solar collector is adopted on a monthly basis. The flat plate collector may be vulnerable to convective heat transfer, and therefore, other solar collectors such as vacuum tube collectors may provide enhanced energy performance.

In addition to the risk of vaccine failure caused by strain mismatch, the production of inactivated FMD vaccines is dangerous if adequate biosafety cannot be maintained. Using a high-throughput sequencing protocol optimized for short nucleic acid fragments, the composition of a local inactivated vaccine was analyzed in depth. The serotype O strain identified in the vaccine was genetically identical to viruses found in recent FMD outbreaks in Egypt.

Natural risks encompass a range of disasters and dangers, requiring comprehensive management through assessments, anticipations, and advanced alert systems. Our specific focus is on landslides in challenging terrains. The evaluation of landslide risks employs sophisticated multicriteria models, such as the weighted sum approach, integrating qualitative parameters. Despite the challenges of the rugged terrain in Northern Algeria, it paradoxically hosts a dense population attracted by valuable hydro-agricultural resources. Our research is dedicated to studying landslide risks in these areas, particularly in the Mila region, with the aim of constructing a statistical model integrating considerations of both danger and vulnerability. This complex process identifies threats and their determining factors, including geomorphology and socio-economic conditions. The result is a valuable tool for effective risk management, strengthening safety and resilience against natural disasters. By understanding the intricate interplay of geological, environmental, and social elements, our research can contribute to the development of targeted interventions, fostering a more resilient community in the face of natural adversities.

This study describes an eco-friendly synthesis of ZnO nanoparticles using aqueous oat extract. The advanced electrochemical and optical features of green synthesized ZnONPs displayed excellent antibacterial activity, and exhibited an important role in pharmaceutical determinations. The formation of nanoscale ZnO was confirmed using various spectroscopic and microscopic investigations. The formed nanoparticles were found to be around 100 nm. The as-prepared ZnONPs were monitored for their antibacterial potential against different bacterial strains. The inhibition zones for ZnONPs were found as E. coli (16 mm), P. aeruginosa (17 mm), S. aureus (12 mm) and B. subtilis (11 mm) using 30 µg mL-1 sample concentration. Also, ZnONPs exhibited significant antioxidant effects 58 to 67 % with an average IC50 value of 0.88 ± 0.03 scavenging activity and 53 to 71 % (IC50 value 0.73 ± 0.05) against the DPPH and ABTS scavenging free radicals, respectively. The photocatalytic potential of ZnONPs for Rhodamine B dye degradation dye under UV irradiation was performed. The photodegradation process was carried out as a function of time-dependent and the complete degradation (nearly 98 %) with color removal after 120 min. Conclusively, the synthesized ZnONPs using oat biomass might provide a great promise in the future for biomedical applications.

The recently reported microbial natural product N-benzoyl-tryptophane (1) along with twenty-two diverse known bioactive compounds were isolated from the marine Aspergillus terreus LGO13 after its re-cultivation using liquid culture fermentation. Structures of the isolated compounds were established on the basis of HR-ESIMS 1D/2D NMR spectroscopy, and comparison with literature data. The antimicrobial, cytotoxicity, and antiviral activities of the microbial extract and the obtained compounds were investigated using a set of microorganisms, cervix carcinoma KB-3-1, non-small cell lung cancer (NSCLC) A549, and coronavirus (SARS-CoV-2), respectively. Molecular docking (MD) simulation was employed to explore the theoretical targets of the isolated metabolites as anti-SARS-CoV-2 agents. Chaetominine (2) seemed to be a potential candidate against papain-like protease (PLpro), one of the viral proteins being aimed by recent research as a possible target of anti-covid agents. Inspired by the MD results, we accordingly assessed the antiviral efficacy of chaetominine (2), fumitremorgin C (6), and azaspirofuran A (9) against SARS-CoV-2. Fumitremorgin C (6) showed a high selectivity index (SI = 20.3), while chaetominine (2) and azaspirofuran A (9) showed moderate selectivity index (SI = 6.6 and 3.2, respectively). These results showed a promising antiviral activity of Fumitremorgin C against SARS-CoV-2 virus.

Exotic plants are usually problematic for the native species where they coexist. This study evaluated the effect of naturalised alien Cenchrus echinatus L. on native plants in the urban vegetation. A field trial was conducted to assess the effect of this species on cover and diversity of the native vegetation. The allelopathic potential of such species was examined. Plots comprising C. echinatus had lower cover of some native species. Lower floristic diversity was observed at more dense cover of this plant. The soil under Cenchrus attained lower N, P and K contents. This soil had no effect on germination and growth of the native species. It also comprised germinable seeds of some species which were absent from the standing vegetation. Exotic C. echinatus may exert a negative effect on the native vegetation of the urban plant communities. Dense cover of Cenchrus may inhibit germination of native species, leading to reduction in their cover. The reduction in cover and diversity of native species was not attributed to allelopathy. These results suggest that naturalised C. echinatus may be more competitor than the native ones, particularly at higher densities. Furthermore, it may represent a threat for the native plants in the urban vegetation.

Chemoinformatics is the combination of physical chemistry theory with computer and information science techniques "in silico techniques" to a variety of descriptive and prescriptive chemistry issues, including applications to biology, drug discovery, and related molecular areas. On the other hand, machine learning has become a vital tool for drug designers to mine chemical information from enormous compound databases in order to build medications with important biological features. In Egypt, chemoinformatics were used recently in different applications. For example; the development of new antimicrobial agents like tetracycline analog B (Iodocycline). Another area of application in bioinformatics included heart disease classification based on hybrid ensemble stacking technique. In the era of COVID-19, hybrid approach for COVID-19 detection from chest radiography was applied. Furthermore, bio/chemoinformatics methods were used to compare antimicrobial medications in order to choose an effective nose-to-brain formulation targeting meningitis infection by using differences in the drugs' primary structural, topological, and electronic characteristics. An example for this included cefotaxime and ceftriaxone that were examined at three levels: at formulation level, by comparing the loading in gelatin and tripalmitin matrices as basis for the production of nanoparticulate systems, at biopharmaceutical level, through interaction with mucin and the P-gp efflux pumps, and at therapeutic level, through studying the interaction with S. pneumoniae bacterial receptors.

In the Lemongrass (Cymbopogon citratus), the investigations showed a wide range of active molecules their biological properties. However, most of these studies were conducted on the wid varieties, while cultivated plan addressed. This study aimed to characterize the biomolecules and biological activities of Lemongrass growing us African conditions sons in in Marocco. Marocco. Phenolic compound profiles of aqueous (AE) E) ethanol ethanol (EE), (EE), and methanol (ME) extract: fractions were obtained with steric exclusion chromatography on Sephadex 050 gel and identified by LC-MS/MS polyphenols (TPC), flavonoids (TFC), and antioxidant activities (FRAP: scavenging value and TAC: Total Antioxidant C the fraction were evaluated as well as the antimicrobial activity Obtained results showed that the ME contained e compounds (ie. Apigenine-7-0-rutinoside and myricitine-3-0-rutinoside). The AE showed the presence of five mole kaemiferol-3-0-glucuronide), while EE showed the presence of three molecules (Le. Quercetine-3-0-rutinoside). Reg chemical characterization, the rization, e highest value of Total phenolic content (TPC) was obtained in conten btained in AE ΑΕ (25) (4.60-0.29 mg highest value of Total flavonoids content (TFC) was obtained Ined in ME (29) (0.7±0.08 mg/g). Concerning the antioxide the highest FRAP was obtained in ME (29) (97.89%) and the highest total antioxidant capacity (TAC) was obtained (89.89%) Correlation between FRAP, TPC, and TFC was noted poly in fractions of AE and ME. All tested extracts of and their fractions showed a significant antimicrobial effect. The lowest minimum inhibitory concentration (MIC) wa for ME against E. col. Extracts biological activities and their fractions were governed by their active molecules. Ther new and clarify a novel aspect of bioactive molecules in the extracts of cultivated C. citratus Equaly, throughout this we clarified the relationship between identified molecules and their biological properties including antioxidant and comparative studies new activities, which is new for the study area. This study is suggested to be a reference. assays of other biological activities for the study plant

Venoms are a rich source of bioactive compounds, and among them is leberagin-C (Leb-C), a disintegrin-like protein derived from the venom Macrovipera lebetina transmediterrannea snakes. Leb-C has shown promising inhibitory effects on platelet aggregation. Previous studies have demonstrated that this SECD protein specifically targets α5β1, αvβ3 and αvβ6 integrins through a mimic mechanism of RGD disintegrins. In our current study, we focused on exploring the potential effects of Leb-C on metastatic breast cancer. Our findings revealed that Leb-C disrupted the adhesion, migration, and invasion capabilities of MDA-MB-231 breast cancer cells and its highly metastatic D3H2LN sub-population. Additionally, we observed significant suppression of adhesion, migration, and invasion of Human Umbilical Vein Endothelial Cells (HUVECs). Furthermore, Leb-C demonstrated a strong inhibitory effect on fibroblast growth factor 2-induced proliferation of HUVEC. We conducted in vivo experiments using nude mice and found that treatment with 2 µM of Leb-C resulted in a remarkable 73% reduction in D3H2LN xenograft tumor size. Additionally, quantification of intratumor microvessels revealed a 50 % reduction in tumor angiogenesis in xenograft after 21 days of twice-weekly treatment with 2 µM of Leb-C. Collectively, these findings suggest the potential utility of this dinsintegrin-like protein for inhibiting aggressive and resistant metastatic breast cancer.

The rate of accidents in Morocco is experiencing a significant increase. Automatic license plate detection and recognition (ALPR) is an essential road safety technology. It facilitates applications such as traffic control, law enforcement, and toll collection by allowing for the automated recognition of vehicles on the road. In this study, we incorporated ShuffleNet V2 into the end-to-end YOLOV5 object detection system. The objective was to develop a model capable of identifying Moroccan license plates with an accuracy of 87%. The proposed model is intended to attain a high processing performance of 60 frames per second (FPS) while maintaining a low weight of 1.3 megabytes (MB) and a parameter count of 0.44 million floating point operations (MGFLOP). Our model maintains superior performance and is highly compatible with embedded systems compared to other models utilized in the same context.

Due to a lack of knowledge about arthropod biodiversity in Egyptian organic agro-ecosystems; the study aimed to introduce information on the diversity, richness, and distribution of insect and mite species in two organic agro-ecosystems, also, to investigate the impact of plant-arthropod interactions. Samples collected from two organic farms, i) Shampoliah farm, Fayoum (GCS 29°21'07.4"N 30°44'17.8"E), and ii) SEKEM farm, Sharkia (GCS 18 30°22'56.1"N 31°39'17.4"E). Results shown 39 species recorded in Shampoliah farm, and 35 species in SEKEM of mite, insect, medicinal, and weed species. When 14 species shared among two sites. Study has measured the H', D and 1/D indices within each location, and the similarity/dissimilarity between locations. The study hypothesized the possible plant-arthropod interactions that explain why diversity differs from an ecosystem to another; due to; plant size, plant morphological characters, soil fertilization, plant nutritional content, and the prey-predator interactions. The added hypothesis; is to show that the importance of natural habitat is supporting natural enemies and distribution of arthropods, which could vary dramatically with the type of pest species, IPM, and landscape type considered.

Due to their wide range of uses in modern technology, nanomaterial’s of silver metallic (Ag-NPs) have engaged considerable concern, driving significant research with development efforts. This study focuses on investigating the antimicrobial properties of Ag-NPs, encompassing their production, characterization, and biological aspects. The eco-friendly extracellular biosynthetic method employed in this work utilized extracts from the marine fungus Aspergillus flavus MK4 as reducing agents for nanoparticle synthesis. Analyzing the colloidal Ag-NPs using UV-visible spectroscopy revealed a peak in absorbance at 460 nm, indicating the presence of plasmonic properties. The electrons imaging of internal structure (TEM) elucidated spherical shape of the Ag-NPs by 15 nm size. Testing against bacterial diversities (Gr-ve & Gr+ve) revealed potent antibacterial and antifungal efficacy. Cytotoxicity versus HepG-2 cell line was assessed using the MTT assay, and antioxidant properties were examined through the radical scavenging (DPPH) assay. In wise of their conceivable applications in the fields of antibacterial, anticancer, and wound-healing, the Ag-NPs that were synthesized exhibit promising features. With its powerful ability to synthesize silver nanoparticles (Ag-NP), Aspergillus flavus MK4 Aspergillus flavus MK4 can generate nanoparticles extensively characterized, demonstrating their antibacterial, antioxidant, anticancer, and wound-healing properties.

Molecular dynamics simulations were performed to examine the impact of temperature (ranging from 250K to 350K) on the structural behavior of cellulose chains when dissolved in an aqueous cuprammonium hydroxide Cuam solvent system. By monitoring the root mean square deviation (RMSD) and radius of gyration (Rg) values at each temperature, we found that the geometric deformation of the cellulose chains changed significantly at T=300K. In contrast, Rg and RMSD values remained stable at temperatures in the range of 250K, 270K and the range of 330K, 350K. Calculating the interaction energy between the solvent and cellulose chains revealed that temperature significantly influences the cellulose dissolution process in the Cuam solvent system and that T=300K is an efficient temperature for its dissolution. The number of intra- and interchain hydrogen bonds was also calculated as a function of temperature, and the analysis confirmed that there is no breakage of these bonds at temperatures below 300 K (i,e: 250K, 270K) and above 310 K (I,e, : 330K and 350K) either between two native chains or between a native chain and another derivative.

The olive tree (Olea europaea L.) is an evergreen tree that occupies 19% of the woody crop area and is cultivated in 67 countries on five continents. The largest olive production is concentrated in the Mediterranean basin, where the olive tree has had an enormous economic, cultural and environmental impact since the 7th century BC. In the Mediterranean region, salinity stands out as one of the main abiotic stress factors significantly affecting agricultural production. Moreover, climate change is expected to lead to increased salinisation in this region, threatening olive productivity. Salt stress causes combined damage by osmotic stress and ionic toxicity, restricting olive growth and interfering with multiple metabolic processes. A large variability in salinity tolerance among olive cultivars has been described. This paper aims to synthesize information from the published literature on olive adaptations to salt stress and its importance in salinity tolerance. The morphological, physiological, biochemical, and molecular mechanisms of olive tolerance to salt stress are reviewed.

Multiple myeloma (MM) is an incurable, diverse cancer in which abnormal plasma cells produce and release monoclonal immunoglobulin (Ig), also known as monoclonal protein or M protein. MM is always preceded by monoclonal gammaglobulinemia of unknown significance (MGUS) and smoldering multiple myeloma (SMM). Diagnosis of MM is made from a bone marrow sample, which involves analysis of the appearance of plasma cells. Quantification of CD138+ plasma cells in core biopsies is performed using techniques such as immunohistochemistry, flow cytometry, fluorescence in situ hybridization (FISH) and conventional cytogenetics. Urinalysis includes total protein by immunofixation and 24-hour urine by serum protein electrophoresis. FISH probes should detect the presence of at least del 13, del 17p, t(4;14), t(11;14), t(14;16), and 1q21 amplifications. Indeed, next-generation sequencing (NGS) has become an increasingly important tool in the diagnosis and treatment of MM. It can be used to identify genetic mutations, copy number changes, and clonal structures to help determine disease prognosis and treatment strategies. NGS can identify subclonal populations of cancer cells that are resistant to therapy and may lead to disease relapse, and can be used to identify potential targets for personalized therapy. For example, NGS can identify mutations in genes involved in drug resistance, enabling the selection of drugs that may be more effective in treating a patient's cancer. This systematic review analyzes 182 papers to determine the position and role of NGS in the diagnosis of MM. We first analyze the platforms and sample types used in the selected studies, and then start discussing the results.

The main objective of the present study was to investigate arsenate [As (V)] resistance genes in rice cultivars grown in arsenic contaminated Egyptian soil in order to genetically induce resistance against arsenic in the local rice varieties as well as defining contaminated rice grains and/or soil. Three local rice cultivars; Sakha 102-104 were cultivated on modified Murashige and Skoog Basal Medium (MS medium) containing elevated concentrations of arsenate (0.1, 1 and 10 mg/l). The three varieties showed different resistant attitudes against arsenate with Sakha 104 being the most resistant. Extracted messenger RNA (mRNA) from treated and untreated Sakha 104 plantlets was scanned using differential display to demonstrate the arsenate resistant genes using three different arbitrary primers. About 100 different RNAs with (1500 bp - 50 bp) were obtained from which seven were up-regulated genes, subjected to DNA cloning using TOPO TA system and the selected clones were sequenced. The sequence analysis described four genes out of the seven namely disease resistance protein RPM1, Epstein-Barr virus EBNA-1-like, CwfJ family protein and outer membrane lipoprotein OmlA while the other three genes were hypothetical proteins. It is concluded the four induced genes in the resistant rice cultivar considered as a direct response to arsenic soil pollution. Genes detected in the present study can be used as geno-sensors for rice grains and soil contamination with As (V). Moreover, local rice cultivars may be genetically modified with such genes to induce high resistance and to overcome arsenic soil pollution.

This paper presents a novel cheminformatics approach for the design and synthesis of hydroxyapatite/collagen nanocomposites, which have potential biomedical applications in tissue engineering, drug delivery, orthopedic and dental implants. The nanocomposites are synthesized by the co-precipitation method with different ratios of hydroxyapatite and collagen, and their mechanical, biological, and degradation properties are analyzed using various experimental and computational techniques, such as attenuated total reflection Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, scanning electron microscopy with energy-dispersive X-ray spectroscopy, and molecular simulation. The antimicrobial activity of the nanocomposites is evaluated in vitro against several bacterial and fungal strains, demonstrating their medical potential. Additionally, in silico analyses are performed to predict the absorption, distribution, metabolism, and excretion properties and the bioavailability of the collagen samples. This work opens new avenues for the development of novel biomaterials using cheminformatics tools and methods, which can facilitate the optimization of the design and synthesis parameters, as well as the prediction of the biological outcomes. Future research directions include the investigation of the biocompatibility and bioactivity of the nanocomposites in vivo, as well as the exploration of other applications and functionalities of these nanocomposites.

The field of biosensors has found great use for surface plasmon resonance (SPR), which has attracted attention for its multiple applications. With the goal of early cancer detection at the level of a single living cell, this research numerically investigates a very sensitive D-shaped fiber-optic biosensor based on surface plasmon resonance (SPR). The titanium oxide (TiO2) is coated on gold (Au), which is utilized as a thin-film plasmonic material in the suggested biosensor structure. The guiding of light in the fiber is modeled using the finite element method (FEM) when six different types of healthy human cells and their malignant counterparts are exposed to its sensitive region. Refractive index (RI) differences between cancer cells and healthy cells are found through the analysis of the optical spectra and their amplitudes. This enables us to identify small changes in the optical characteristics of cells that could be a sign of pathogenic alterations. In this work, we concentrated on three forms of cancer: skin cancer (basal cell) and breast cancer (MDA-MB-231 and MCF-7). The results show which parameters are optimal to ensure that the sensor performs well when used to detect the three types of cancer under study. When the suggested sensor’s performance is compared to SPR sensors that have previously been published in the literature, it becomes clear that our sensor offers great promise for early cancer detection.

The efficiency of organic solar cells (OSCs) is influenced by various factors, among which environmental temperature plays a significant role. Previous studies have shown that the thermal stability of these cells can be enhanced by incorporating a third component into their structure. Ternary organic solar cells, in particular, have shown promising results in improving thermal stability. A well-designed electron transport layer (ETL) can significantly bolster thermal stability by facilitating efficient charge transport and reducing charge recombination. In this study, we investigated the effect of temperature on the efficiency of inverted ternary structures, ranging from 300 K to 400 K. The structures examined include FTO/SnO2/PM6:D18:L8-BO/PEDOT: PSS/Ag, FTO/Spiro-OMeTAD/PM6:D18:L8-BO/PEDOT: PSS/Ag, and FTO/PC60BM/PM6:D18:L8-BO/PEDOT: PSS/Ag. Through simulations employing three different electron transport layers—SnO2, Spiro-OMeTAD, and PC60BM—we observed that at 340 K (65°C) these structures maintained 92% of their original high efficiency of ~20% at 300 K, which represents a high level of thermal stability under the high PCE condition.

Background: Antibiotic resistance is an urgent issue everywhere in the globe. It is necessary to look into new sources of antibiotics to address this issue. Aim of the study: studying the purification of Corallopyronin B from various soil conditions in Egypt, as well as the antibacterial effectiveness of Corallopyronin B in preclinical animal testing and randomized human clinical trials phases 1/2. Type of the study: Screening experimental study. Methodology: Several soil conditions in Egypt were examined to create bacterial isolates that generated the antibiotic chemical Corallopyronin B. Using reversed-phase HPLC, Myxopyronin B was purified. The test antibiotic's minimum inhibitory concentration( MIC) and in vitro antibacterial activity were ascertained using the paper disc diffusion assay and the broth microdilution technique. Furthermore, in stages 1/2 of randomized clinical trials including human and animal models, pharmacokinetics, adverse drug reactions, and the in vivo antibacterial spectrum were discovered. Results: The soil bacterial isolate Corallococcus coralloides DSM 2259, which was grown on a Casein yeast peptone( CYP) plate, produced Corallopyronin B from its culture supernatant. At MICs more than 100 mcg/ml, the test antibiotic inhibited the growth of many Gram -ve bacteria, including Escherichia coli, while also preventing the growth of numerous Gram +ve bacteria, with MICs ranging from 1 to 10 mcg/ml. Eukaryotic cells, on the other hand, including those in humans and fungi, were unharmed. The test antibiotic was shown to have a bactericidal effect by inhibiting bacterial DNA-dependent RNA polymerase( RNLP). In phases 1/2 of randomized human clinical trials, when 600 mg of the dose per 70 kg of body weight was administered SC, the Cmax was 8.6 mcg/ml at Tmax 1 hour; T1/2 reached 136 min following first-order kinetics of elimination. It stopped acting around 6-7 hours after SC was administered. In the preclinical and randomized human clinical trial phases 1/2, less than 6 percent of experimental candidates had uncommon toxicity, which showed up as reduced bile flow. Protein binding with plasma albumin was detected which reached about 83%. Conclusion: The current work was noteworthy since it involved the production of the bactericidal antibiotic Corallopyronin B from Corallococcus coralloides DSM 2259 which was isolated from several soil environments in Egypt.

Modern advances in technology have increased the demand for traditional accounting systems to be upgraded for real-time data processing, security, and standardized reports. Thus, this paper proposes a new accounting information system that integrates IoT, blockchain, and XBRL. The proposed system aims to automate the accounting process by using IoT to collect data and send it automatically to a blockchain, which acts as a database that will generate journal entries automatically through smart contracts. XBRL will then be used as an output method for standardized financial reports based on the data transferred from the blockchain. This paper uses a qualitative research design based on semi-structured interviews with 13 industry experts from IT engineering, academia, and financial systems analysis. NVivo software was used to conduct a thematic analysis of interview transcripts. The findings revealed the technical feasibility, challenges, and benefits of the proposed integration and identified the most efficient mechanism for data transmission across the three technologies. The paper concluded that while integration complexity and user adoption are challenging, this integrated system can revolutionize accounting by enabling real-time data capture, automation of essential operations, data security, and integrity improvements. To our knowledge, this is the first paper to develop a comprehensive accounting information system framework using IoT, blockchain, and XBRL to automate data collection, improve data security, and streamline financial reporting. The study's potential to impact accounting systems and financial reporting research and practice emphasizes its importance.

Abstract: Ovulation failure was associated with a reduction in pre-mating concentrations of oestradiol-17β and prolactin (PRL). The present study aimed to evaluate whether pre-mating PRL levels have a role on the reproductive efficiency of doe rabbits. A total of 78 multiparous California does (2nd parity) were divided, according to plasma pre-mating PRL, into five categories, >20-25, >25-30, >30-35, >35-40, and >40-45 ng/ml. Does in all categories were naturally mated and kindled, then their reproductive measurements and progesterone (P4) levels were determined. Results show that pre-mating PRL averaged 23.60±0.78, 28.00±0.83, 33.46±0.43, 38.17±0.49 and 41.98±0.68 ng/ml in five categories (p < 0.05), respectively, representing the highest distribution (38.5%) in the 3rd-category. Live body weight of doe rabbits, at mating, pregnancy, and parturition increased (p < 0.05) with increasing pre-mating PRL level. The number of services, litter size, and pregnancy rate increased (p < 0.05) by increasing PRL levels. Reproductive traits and P4 level at mid-pregnancy of does, and average weight of kits at birth increased (p < 0.05) by increasing PRL levels. The pre-mating PRL profile is important for the identification of reproductive performance in doe rabbits.

Direct Energy Deposition (DED) is a versatile and efficient method in metal additive manufacturing. However, humping, caused by abnormal dynamics in the melt pool (MP), poses a significant threat to the geometric integrity of manufactured products. Current state-of-the-art (SOTA) methods primarily detect humping by analyzing late-stage spatial abnormalities, such as MP detachment. This approach is fundamentally reactive, leading to a tendency to miss early humping spatiotemporal dynamics, like cyclic elongation of the MP. This study introduces a novel, proactive indicator named VIMPS (Variability of Instantaneous MP Solidification-Front Speed), a physics-based tool designed to quantify early abnormal fluctuations in MP solidification speed. The experiments demonstrate VIMPS correlation with humping-induced geometric inaccuracies. By capturing early spatiotemporal dynamics of the MP, VIMPS reduces detection latency by 30 seconds compared to existing SOTAs that focus solely on spatial abnormalities. This significant improvement transforms detection from reactive to proactive, providing the time needed for corrective actions to enhance the overall productivity and quality of the DED process.

Energy harvesting is an emerging topic recently. This harvested energy is used to operate wireless sensors for different industrial monitoring and automation. To maximize the harvested energy in spinning systems, the harvester should vibrate at resonance for different spinning frequencies which can be achieved by active fitting. In this research, a novel methodology was developed by actively customizing the length of vibrating element beam to manipulate its natural frequency according to the spinning frequency. Different models were investigated numerically and experimentally to verify the proposed methodology. COMSOL Multiphysics software V5.1 was used to develop the numerical model, then and tip deformation and voltage difference results were benchmarked. The numerical model was verified experimentally by attaching a piezoelectric MIDE PPA 1021 which its vibrating length was varied by changing the supporting length from 0 mm to 12 mm to a spinning object having variable frequency from 0-200 Hz. It is found that the MIDE PPA 1021 beam vibrated at its resonance throughout the specified spinning frequencies. The proposed harvester can be applied in battery-free sensors being used in automotives, wind-mills blades, and rotating machinery.

Background: Bacterial resistance to several antibiotic classes is seen as a grave threat worldwide. Bacterial resistance to antibiotics was mostly caused by the abuse and overuse of antibiotics, particularly penicillins and first-generation cephalosporins, in Egypt's primary healthcare facilities. Aim of the study: To investigate the main resistant bacteria to a few chosen penicillins and first-generation cephalosporins, as well as the characterization of these antibiotics' resistant genes and their detrimental effects in Egypt's main medical facilities. Methodology: Two hundred respiratory and urinary tract infection (RTI and UTI) specimens were gathered from Egyptian primary medical center patients. The turbidimetric assay at 630 nm wavelength, the broth dilution technique, and the nanopore sequencing homology approach were used to characterize the major resistant pathogenic bacteria and their resistant genes to cefadroxil (first generation cephalosporins) and nafcillin (antipseudomonal penicillin). Moreover, adverse outcomes resulting from antibiotic resistance were noted. Results: Out of 200 specimens with RTI and UTI, 186 samples showed the proliferation of resistant bacteria isolates. Enterococcus faecium strain NFC and Staphylococcus aureus strain CDX were among them. Nanopore sequencing confirmed that the antibiotic-resistant gene in Enterococcus faecium was the NFC gene, whereas the antibiotic-resistant gene in Staphylococcus aureus was the CDX gene. Penicillin-binding proteins with modest affinity were encoded by both genes. These bacterial resistance patterns were linked to a low death rate of 5% and a high morbidity rate of 47%. Conclusion: By expressing low-affinity penicillin-binding proteins through resistant NFC and CDX genes, Enterococcus faecium strain NFC and Staphylococcus aureus strain CDX were found to be the predominant bacterial isolates that cause antibiotic resistance to first-generation cephalosporins and penicillins.

Background: Across the world, antibiotic resistance is a critical challenge. To address such a problem, it has to be done to investigate new antibiotic sources. Aim of the study: Study of the antibacterial activity of Corallopyronin A in preclinical animal testing and randomized human clinical trials stages 1/2, as well as investigating the purification of Corallopyronin A from different soil conditions in Egypt. Type of the study: Screening experimental study. Methodology: Egypt's various soil conditions were tested to develop bacterial isolates that produced the antibiotic compound Corallopyronin A. Reversed phase HPLC was used to purify Myxopyronin A. The broth microdilution method and the paper disc diffusion assay determined the test antibiotic's minimum inhibitory concentration( MIC) and in vitro antibacterial activity. Moreover, in vivo antibacterial spectrum, adverse medication responses, and pharmacokinetics were found in phases 1/2 of randomized clinical studies involving humans and animal models. Results: Corallopyronin A was generated from the culture supernatant of the soil bacterial isolate Corallococcus coralloides M2, cultivated on a Casein yeast peptone( CYP) plate. The test antibiotic prevented the growth of several Gram-ve bacteria, including Escherichia coli, at MICs higher than 100 mcg/ ml; while blocking the development of many Gram +ve bacteria, with MICs ranging from 3 to 15 mcg/ ml. However, eukaryotic cells—such as those found in fungi and humans—were unaffected. A bactericidal consequence of the test antibiotic was detected in the inhibition of prokaryotic DNA-dependent RNA polymerase( RNLP). Conclusion: The synthesis of the bactericidal antibiotic Corallopyronin A from Corallococcus coralloides M2 isolated from different soil settings in Egypt intrigued the current investigation.

Background: Antibiotic resistance is an overwhelming serious difficulty globally. This necessitates the exploration of novel sources of antibiotics to overcome this challenge. Aim of the study: Bacterial Myxopyronin A production from various soil environments Egypt; as well as testing its antimicrobial activity in preclinical animal testing and randomized human clinical trials phases 1/2. Type of the study: Screening experimental study. Methodology: Different soil environments in Egypt were screened for the growth of bacterial isolates producing Myxopyronin A as an antimicrobial agent. Purification of Myxopyronin A was performed via reversed-phase HPLC. Paper disc diffusion assay, as well as the Broth dilution technique, were exploited to assess the invitro antimicrobial and minimum inhibitory concentration( MIC) of the test antibiotic. Furthermore, in vivo antimicrobial spectrum, adverse drug reactions, and pharmacokinetics were detected during animal model testing stages and human randomized clinical trials phases 1/2. Results: From the culture supernatant of the Myxobacterium Myxococcus fulvus 124B02 which was the predominant soil bacterial isolate grown on the Casein yeast peptone plate, Myxopyronin A was produced. The test antibiotic blocked the growth of many Gram +ve bacteria with MICs less than 100 mcg/ ml. In contrast, it inhibited the growth of a few Gram -ve bacteria such as Escherichia coli at MICs greater than 100 mcg/ ml. On the other hand, Eukaryotic cells such as fungal and human cells were not affected. Prokaryotic DNA-dependant-RNA polymerase( RNLP) was noticed to be inhibited via the test antibiotic suggesting its bactericidal action. The maximum concentration was 7-8 mcg/ ml at a maximum time of 2 hours when 600 mg dose was orally administered in randomized human clinical trials phases 1/2, and T1/2 reached 2.5 hours following first-order kinetics of elimination. The duration of its action was nearly 12 hours after oral administration. Rare toxicity was detected during preclinical and randomized human clinical trials phases 1/2 in the form of mild diarrhea and cholestatic jaundice in less than 5 % of experimental candidates. Conclusion: The present study was promising due to the bactericidal antibiotic Myxopyronin A production from Myxococcus fulvus 124B02 isolated from different soil environments in Egypt.

The transition to sustainability requires major behavioural changes. This requires a complete rethinking of ecosystems and their interconnections, reassessing environmental issues, and a behavior change manifesting. Thus, understanding how sustainability Knowledge, Attitudes, and Practices (KAP) change is essential to sustainability as they shape human behaviour. The main aim of this study was to investigate the constructs of sustainability KAP among university and non-university populations. Data were collected using a structured questionnaire of items measured on a five-point Likert scale ranging from 1 (strongly disagree) to 5 (strongly agree). The questionnaire was distributed to diverse participants, ensuring a broad representation of views on sustainability. There are ten sociodemographic variables, 344 respondents in UAE where the female (28.5%) and male (13.7%), (58.1%) participants did not belong to the UAE university and their age fall into the 18-24 years old. The mean scores indicate a positive orientation towards sustainability, with Knowledge (M = 4.2272), Attitudes (M = 4.2650), and Practices (M = 3.8198) all above the midpoint and the UAE university students showed more knowledge, attitude and practices scores ‎than others population. Associations between KAP were significant at a significant level of p &lt; 0.05. This indicates that the next generation will have more environmentally KAP.

المستخلص تصنيع لقاح مكون من الحمض النووي الريبوزي الرسول الخاص بالبروتينات المسئولة عن انتاج البروتينات نيورامنيديز والهيم اجليوتونين لفيروسي الانفلونزا الخنازير والطيورمحاط بجزيئات دهنية بحجم النانوميتر عدوى انفلونزا الخنازير وانفلونزا الطيور مشكلة خطيرة تؤرق العالم كله هذه الايام خصوصا انها مميتة لكثير من اطفال العالم . بعد فترة التعافي من الاصابة تتكون المناعة المكتسبة ضدها لمدة عام تقريبا. هذه الانفلونزا تسبب تسمم فيروسي في الدم بالاضافة للالتهاب الرئوي وهذامن بين اكبرالاسباب للوفاة بين الاطفال قبل سن عامين عالميا بشكل مباشر. الهدف من الدراسة هو انتاج لقاح الحمض النووي الريبوزي الرسول من نوع الام بالنانوتكنولوجي لبروتينات الهيم اجليوتونين والنيورامنيديز الموجودة على سطح هذه الفيروسات التي تساعدتها في الاتصاق بالعائل الذي ستتكاثر داخل خلاياه بالجهاز التنفسي. هذه الدراسة دراسة استكشافية ومن خلالها استطاعنا تصميم هذا اللقاح باستعمال نظام توصيل للقاح بالنانوتكنولوجي حجم جزيئاته 70نانوميمتر. اللقاح الجديد اظهر فاعلية بنسبة 60% واظهر فاعلية حيوية مقاربة واثار جانبية اقل بالمقارنة باللقاحات المتوفرة حاليا بالسوق الدوائي ضد هذا النوع من الفيروسات الوبائية. ABSTRACT Background: Worldwide, Swine and Avian influenza, or the H1N1 and H5N1 serotypes of the Influenza A virus, is a highly contagious illness. In recent years, the global incidence of mortality rate has surpassed 284,000 fatalities. Aim of the study: The production of mRNA vaccine lipid nanoparticles (LNP) to combat the deadly strains of Avian and Swine influenza (H1N1 and H5N1 of the influenza A serotype). Methodology: Polymerase chain reaction (PCR) was used to clone genes of interest encoding Haemagglutinin (HA) and Neuraminidase (NA) of Influenza A virus strains (H5N1 and H1N1) known as Avian flu and Swine flu, respectively. The genes were then inserted using the EcoR1, BAM Hind II restriction endonuclease type II, and Ligase enzyme into the pET-21(+) transcription vector plasmid. On the other hand, the hybrid transcription vectors were mixed with T7 RNA polymerase and ribonucleotides within a test tube after being linearized using EcoR II. Following their purification via reversed-phase high-performance liquid chromatography (RP-HPLC), the mRNAs of the HA and NA were encased in 70 nm LNPs and subjected to reverse-phase high-performance liquid chromatography (RP-HPLC). Lastly, immunogenicity studies were performed in stages 1/2 of randomized human and preclinical clinical trials. Results: The bivalent vaccination had around 63% efficacy in preclinical studies and approximately 60% efficacy in randomized human clinical trials. As shown by the ELISA test, strong neutralizing antibodies against HA were prevalent. Conclusion: The current study is a promising effort because of the development of the novel LNP-mRNA vaccine, which could lower the incidence of Avian and Swine flu infectious disorders.

The dramatic increased rates of uncontrolled urbanization in various parts of the World have resulted in loss of native species and overall threats to biodiversity. Over the last few decades Saudi Arabia has witnessed a remarkably rapid population growth and unparalleled levels of urbanization, leading to threats to biodiversity. Ants were pitfall-trapped across an urban-rural gradient to evaluate ant assemblage responses to urbanization in Wadi Hanifa, Riyadh, Central Saudi Arabia. Fifteen sampling sites were selected along three different urbanization gradients, each traversing urban, suburban and rural zones. Within each site 10 traps were distributed and operated for 7 consecutive days, at 3-monthly intervals throughout one year. Vegetation, ground cover, and chemical and physical soil variables at sampling sites were analyzed concurrently. Ant abundance, species richness, evenness, and diversity indices of Shannon and Simpson were calculated for each site using PC-ORD to demonstrate diversity patterns along the urbanization gradients. Ant assemblages were assessed by detrended corresponding analysis (DCA), canonical correspondence analysis (CCA), and analysis of similarity (ANOSIM) using PC-ORD. Indicator species analysis was conducted to define representative species along the urbanization gradient. A total of 42 ant species were identified. The diversity parameters were consistent across the urbanization gradient. However, significant differences were observed in the ant assemblages between rural and urban, suburban and urban, but only marginal between rural and suburban. Eleven ant species were identified as indicator species (IV values between 50.7-80.7%). The ant assemblages were influenced by flora, ground cover, and soil variables.

Background: Breast cancer and other neoplasms like acute lymphocytic leukemia pose a serious threat to public health worldwide. Treatment for malignancies including acute lymphocytic leukemia and breast cancer requires enzymes that break down L-glutamine. An amidohydrolase called L-glutaminase can be an effective chemotherapeutic tool for treating various cancers. Methods: On mineral L-glutamine agar selective medium (MGA), a few bacterial isolates were examined in the current investigation to see if they produced L-glutaminase. However, the most effective positive bacterial isolates generating L-glutaminase were identified using morphological and biochemical testing. Molecular detection using the direct Southern blotting approach was also used to determine the main positive isolate that produces L-glutaminase. L-glutaminase synthesis by bacteria was evaluated for its characteristics. Using an MTT test, the anticancer activity was evaluated. Results: exclusive bacterial isolates that used L-glutamine as their sole source of metabolic nitrogen exhibited favorable growth on MGA. PH 7.4 and a temperature of 37 0C were the ideal environmental and physiological conditions for developing positive bacterial isolates. From the soil samples taken from various soil conditions in Egypt, the morphological and biochemical analyses showed that Bacillus cereus 14579 was the main positive bacterial generating L-glutaminase isolate. At a pH of 7.4 and a temperature of 37 °C, the following activators—KCL, ZnSO4, FeSO4, K2HPO4, and MgSO4—provided the high-grade circumstances for characterizing L-glutaminase synthesis. Bacillus cereus-produced L-glutaminase has shown excellent bioavailability and effectiveness as an anticancer therapy. The yield [productivity] was 5.2 U/ml during the original manufacture from MGA, but it increased to 42.96 U/ ml by bacterial recombinant DNA manufacturing. The molecular mass of L-glutaminase was roughly 37 KDa. L-glutaminase was purified, yielding final enzyme recovery of 55 1.23%, total activity 12,990± 19.76 ( U), specific activity 384.66± 8.92( U/ mg of protein), and purification fold 2± 2.99. Furthermore, the L-glutaminase activity was raised by 19%, 23%, 15%, and 9%, respectively, by the enzymatic activators Mn2+, K+, Na+, and Fe3+. It demonstrated strong DPPH scavenging activity (IC50 = 61 μg/ mL) and anticancer activity( IC50 = 40.72, 9.7, 7.39, 20.61, 51.28, and 11.55 μg/ mL, respectively) against human liver (HepG-2), colon ( HCT-116), breast ( MCF-7), lung( A-549), lymphocytic( CCL-120), and cervical( Hela) cancer cell lines. A stronger affinity for its substrate was shown by the kinetic parameters of Km and Vmax, which were 13.2 10-5 M and 119.86 μmol/ ml/ min, respectively. Conclusion: Acute lymphocytic leukemia and breast cancer are examples of auxotrophic malignancies for which L-glutamine serves as the only metabolic source, and L-glutaminase generated by Bacillus cereus was an appropriate enzyme in the therapy of these diseases.

Background: RSV, or respiratory syncytial virus, is a deadly condition that is present all over the world today. The infection is initially contained in the lower respiratory tract without systemic transmission. The objective of the study: Bioinformatics was used in Egypt to create an mRNA vaccine against the Respiratory syncytial virus (RSV). Methodology: In the present screening experimental study, a lipid nanoparticles vaccine of mRNA of the surface fusion protein of Respiratory syncytial virus was manufactured. The present vaccine delivery system was lipid nanoparticles with a particle size of approximately 90 nanometres, manufactured by the hot micro-emulsion method. In stages 1 and 2 of clinical trials, the immunogenicity of the current mRNA RSV vaccine was evaluated. Results: The current vaccine demonstrated 81% immunogenicity in animal testing, but only 69% in stages 1 and 2 of clinical trials. Its side effects were manageable. The results persisted for a while. In the current trial, the vaccination proved effective as a preventative measure against RSV infection. The current vaccination lacked antibody-dependent enhancement, which causes non-protective antibodies to develop. These non-neutralizing antibodies exacerbate infection by activating cytokines and complement cascade through the formation of immune complexes or enhancement of the virus entry and replication in the host cells. On the other hand, the current RSV mRNA vaccine of the surface fusion protein consequent on the production of powerful neutralizing antibodies with prolonged immunity especially to infants and elderly candidates who received the optimal dosage regimen.