Synthesis of new series of 1-phenyl-3-(4-(pyridin-3-yl) phenyl) urea derivatives and its in vitro antiproliferative activities against NCI-60 human cancer cell lines of nine different cancer types are described. Fourteen compounds 5a-n have been synthesized with three different hydrogen bondable moieties (4-hydroxylmethylpiperidinyl and trimethoxyphenyloxy and 4-hydroxyethylpiperazine) attached to the core structure 1-phenyl-3-(4-(pyridin-3-yl) phenyl) urea. Different substituents with different π and σ values were added on the terminal phenyl group. Compounds with 4-hydroxymethylpiperidine moiety showed higher mean percentage inhibition values over the 60-cell line panel at 10-µM concentration. They showed broad-spectrum antiproliferative activity over many cell lines of different cancer types. For instance, compound 5a elicited some lethal rather than inhibition effects on SK-MEL-5 melanoma cell line, 786-0, A498, RXF 393 renal cancer cell lines, and MDA-MB-468 breast cancer cell line by 146.1, 108.7, 136.2, 134.8, 116.6 % at 10 µM, respectively. Compounds 5a-e exhibited superior antiproliferative activity than Paclitaxel and Gefitinib against the most sensitive cell lines. Two compounds, 5a and 5d showed promising mean growth inhibitions and thus were further tested at five-dose testing mode to determine their IC₅₀ values. The data revealed that 5a and 5d urea compounds are the most active derivatives with significant efficacies and superior potencies than Paclitaxel in 21 different cancer cell lines, belonging particularly to renal cancer and melanoma cell lines. Moreover, 5a and 5d had superior potencies than Gefitinib in 38 and 34 cancer cell lines, respectively; belonging particularly to colon cancer, breast cancer and melanoma cell lines.

This study aims at investigating the catalytic performance of Pd, Pd/Pt, and Pd/Au nanocatalysts toward the 2-propanol electro-oxidation reaction (2POR) in an alkaline medium. The catalyst components (Pd, Pt, and Au) were sequentially electrodeposited onto a glassy carbon (GC) electrode surface and further characterized using electrochemical (cyclic voltammetry (CV)) and materials (Field-emission scanning electron microscopy (FE-SEM) coupled with energy dispersive X-ray (EDX)) characterization methods. The Pd/Au/GC catalyst showed the highest catalytic activity in terms of the highest oxidation current (0.386 mA) and the highest stability in terms of the highest obtained current after 1800 s of continuous electrolysis. This behaviour was attributed to the enhancement in the charge transfer kinetics where the Pd/Au/GC catalysts acquired the lowest charge transfer resistance (Rct, 1.85 kΩ) during the 2POR.

Over the past decade, significant developments have occurred in treatment strategies for ovarian cancer, yet targeted therapy with few side effects is still a major issue. The cytochrome P450 (CYP) enzyme family plays a vital role in the tumorigenesis process and metabolism of drugs, with a negative impact on therapy outcomes. Gaining more insight into CYP expression is crucial for understanding the pathophysiology of ovarian cancer since many isoforms are essential for the metabolism of xenobiotics and steroid hormones, which drive the disease's development. The purpose of this review is to provide a clear understanding of differential CYP expression in ovarian cancer and its implications for the prognosis of ovarian cancer patients, together with their polymorphisms' effect on chemotherapy metabolism. Finally, we provide our thoughts on opportunities to exploit metabolic CYP expression for novel therapeutic development to treat ovarian cancer.

Water scarcity is a significant challenge facing Jordan today. It is a challenge in all areas that use water, and it has become certain that water is the critical factor in the population/resources equation. The water resources in Jordan have become limited with the noticeable increase in the population, mostly resulting from forced migrations in neighboring countries because of the wars and until our time. The rising natural population growth rate, along with the massive influx of refugees, has turned into a state of disproportion between the daily consumption of the population and the amount of water available. That Jordan shares most of its surface water resources with neighboring countries has exacerbated the situation. The current use of water already exceeds its renewable supply. Excessive withdrawal from aquifers, which leads to a lowering of the water table and deterioration in water quality, covered the deficit. This paper focuses on assessing the water situation in Jordan, mainly evaluating this problem and the solution being considered, the true basis for a sustainable water solution requires awareness by the population, and several governmental and non-governmental organizations are actively involved in educating residents about water shortages. The most important and 'actionable' elements of comprehensive water solutions are discussed in this paper, and these elements exist, develop extra water supplies, water harvesting, water desalination, proper wastewater reuse in the agricultural sector, and reduce the demand for drinking water. This research provides specific recommendations to address the shortage of water resources in the Kingdom and highlights the importance of water conservation and optimal use.

Objective. Political instability, corruption, exclusive institutions et al. are some of the hypotheses backed by literature as to why some nations are more developed than others. One hypothesis which has not been intensively studied is the culpability of individual and institutional behavior and its impact on development. To examine the validity of such a hypothesis, a composite index which quantifies such development hindering behavior must be developed. The prelude to developing this index is to investigate whether such a quantitative measure exists to begin with. To achieve this objective, a bibliometric analysis of Scopus and Web of Science databases will be conducted. Method. A bibliometric and content analysis of Scopus and Web of science databases using Excel, VOSviewer, and R software. Results. The findings of the bibliometric analysis indicate the absence of such measure particularly within the scope of ‘bad behavior’, ‘unethical behavior’, and ‘development’. Conclusions. The study findings provide the greenlight to proceed with the construction of the ‘Bad Behavior Index’. Contribution. The practical contribution of this study is that it provides researchers with an improved methodology on how to conduct a bibliometric analysis to identify the absence of knowledge and provide a justification for the creation of such knowledge by integrating and analyzing two journal databases instead of one, using three mediums: Excel, VOSviewer, and R software.

How important are institutions for the development of nations? Are there any existing measures which quantify the behavior of institutions? Is there any theoretical justification for measuring their behavior? This paper introduces a framework influenced by Plato’s needs theory to provide justification for measuring the behavior of institutions. This involves introducing the humanization hypothesis which states that the behavior of institutions can be measured as they, similar to human beings, are living entities with similar hierarchical needs which are essential for their survival. The paper employs an explanatory and descriptive research design which is highly theoretical in nature.

In recent years, the implementation of artificial intelligence (AI) in accounting has grown in many domains, including auditing. AI permits auditors to evaluate large data sets and rapidly identify discrepancies and sequences in audit. This means auditors can review all of a client's transactions via a low time and effort. This entails auditing firms investing heavily in technological infrastructure as well as training their human resources to use cutting-edge AI technologies. Thus, this research sought to investigate the impact of the use of AI techniques by Jordanian external auditors in fraud risk assessment, the moderating effect of auditor size. The descriptive analytical method was used by distributing 280 questionnaires electronically to auditors employed in auditing firms operating in Jordan, The result reveals that AI techniques are extremely beneficial in fraud risk assessment at all levels, and the relationship between the use of AI techniques and the assessment of fraud risk has improved as auditor size has increased.

Spatial regression models have garnered significant attention across several disciplines, including functional magnetic resonance imaging analysis, econometrics, home price analysis, and many other domains. The phenomenon of sparsity is often found in nature, when a limited number of factors contribute significantly to the overall variation. Spatial regression models frequently use sparsity to indicate less complex computational and more superficial covariance structures. The spatial error model is a significant spatial regression model that focuses on the geographical dependence present in the error terms rather than the response variable. This study proposes an effective approach for estimating the vector of regression coefficients in the spatial error model, taking into consideration of the prior knowledge that some coefficients are insignificant and there is multicollinearity among the regressors. It also introduces pretest and shrinkage ridge estimators for spatial error regression models, evaluating their performance compared to traditional maximum likelihood estimators. It also assesses their efficacy using real-world data and bootstrapping techniques for comparison purposes.

Necrotizing pneumonia due to Methicillin-Resistant Staphylococcus Aureus (MRSA) is devastating and difficult to treat in preterm infants. We report a case of severe MRSA necrotizing pneumonia in a preterm infant. As an add-on rescue therapy to vancomycin, linezolid rapidly cured this case after the failure of vancomycin plus rifampicin. This rapid cure suggests that adjunctive rather than rescue linezolid may be considered in such cases.

Keywords: Barriers; Facilitators; Sepsis; Sepsis Six Guidelines; Nurses.

High dimensional datasets are highly likely to have redundant, irrelevant, and noisy features that negatively affect the performance of the classification algorithms. Selecting the most relevant features and reducing the dimensions of datasets by removing the undesired features is a dimensional reduction technique called Feature Selection (FS). In this paper, we propose an FS approach based on the Black Hole Algorithms (BHO) with a mutation technique called MBHO. Generally, BHO contains two major phases. At the exploitation phase, a set of stars are modified based on some rule and according to some objective function, the best star is selected as the black hole which attracts other stars. Furthermore, when a star gets closer to the event horizon, it will be swallowed and a new one will be randomly generated in the search space which thus is the exploration phase. However, randomness may cause the algorithm to fall into the trap of local optima, and to overcome such complications, inversion mutation is used. Furthermore, we modify a widely utilized objective function in most of the proposed works for wrapper feature selection by combining two new terms that are based on the correlation among the selected subset of features and the features and the classification label. We also utilize a transfer function, known as the V2 transfer function, to convert continuous values into discrete ones to enhance search. We assess our approach via extensive evaluation experiments using fourteen benchmark datasets. We benchmark the performance of a wrapper FS approach called Binary Cuckoo Search (BCS), and three filter-based FS approaches (namely Mutual Information Maximisation (MIM), Joint Mutual Information (JMI), and minimum Redundancy Maximum Relevance (mRMR)). Our evaluation has shown that the proposed model is an effective approach for FS, in selecting better features that enhance the performance metrics on the classifiers. Thus, MBHO can be utilized as one alternative to the existing state-of-art-approaches. We release the source codes of our implementation for the community to build on with new methods and datasets.

The Ministry of Health (MOH) in the Kingdom of Saudi Arabia (KSA) established a National School-based Screening Program (NSBSP) for health screening of school-going children. Students from specific grades were systematically screened for several health problems including obesity, visual and auditory problems, dental cavities, scoliosis, and attention-deficit/hyperactivity disorder (ADHD). This cross-sectional study aimed to determine the prevalence of these health problems among primary school students based on secondary data obtained from the NSBSP. We included 444,259 screened school children from the 1st and 4th grades of 50% of the selected schools (both private and public) across the KSA during the academic year 2018-2019. Among them, the most prevalent health problems identified were dental cavities (38.7%), eye refractory errors (10.9%), and overweight and obesity (10.5%); the less prevalent problems included ADHD (2.81%), auditory problems (0.6%), and scoliosis (0.48%). A greater prevalence of most health problems was observed in girls than boys. The NSBSP successfully aided the detection of health conditions with high and low prevalence among primary school students in the KSA, and thus, identification of health problems of specific concern. Implementation of effective school health services for the prevention, early detection, diagnosis, and treatment of these health problems is imperative.

This study introduces a novel nanocomposite coating composed of PANI/CeO2 nanocomposite films, aimed at addressing corrosion protection needs. Analysis through FTIR spectra and XRD patterns confirms the successful formation of the nanocomposite films. Notably, the PANI/CeO2 nanocomposite films exhibit a hydrophilic nature. The bandgap energy of the PANI composite film measures at 3.74 eV, while the introduction of CeO2 NPs into the PANI matrix reduces the bandgap energy to 3.67 eV. Furthermore, the electrical conductivity of the PANI composite film is observed to be 0.40 S.cm-1, with the incorporation of CeO2 NPs leading to an increase in electrical conductivity to 1.07 S.cm-1. To evaluate its efficacy, electrochemical measurements were conducted to assess the corrosion protection performance. Results indicate a high protection efficiency of 92.25% for the PANI/CeO2 nanocomposite film.

Due to their wide range of uses in modern technology, nanomaterial’s of silver metallic (Ag-NPs) have engaged considerable concern, driving significant research with development efforts. This study focuses on investigating the antimicrobial properties of Ag-NPs, encompassing their production, characterization, and biological aspects. The eco-friendly extracellular biosynthetic method employed in this work utilized extracts from the marine fungus Aspergillus flavus MK4 as reducing agents for nanoparticle synthesis. Analyzing the colloidal Ag-NPs using UV-visible spectroscopy revealed a peak in absorbance at 460 nm, indicating the presence of plasmonic properties. The electrons imaging of internal structure (TEM) elucidated spherical shape of the Ag-NPs by 15 nm size. Testing against bacterial diversities (Gr-ve & Gr+ve) revealed potent antibacterial and antifungal efficacy. Cytotoxicity versus HepG-2 cell line was assessed using the MTT assay, and antioxidant properties were examined through the radical scavenging (DPPH) assay. In wise of their conceivable applications in the fields of antibacterial, anticancer, and wound-healing, the Ag-NPs that were synthesized exhibit promising features. With its powerful ability to synthesize silver nanoparticles (Ag-NP), Aspergillus flavus MK4 Aspergillus flavus MK4 can generate nanoparticles extensively characterized, demonstrating their antibacterial, antioxidant, anticancer, and wound-healing properties.

Pneumonia kills over two million children under-age of five every year. Oral amoxicillin was recommended by WHO as the first drug of choice for treatment of non-severe pneumonia. The study aimed to determine the clinical failure rate of amoxycillin for the treatment of childhood non-severe pneumonia at Primary Health Care Centers (PHCCs). A randomized controlled multicenter-trial study was conducted in Sana’a. IMCI strategy was used to enrollments the cases where randomly allocated to receive amoxicillin or co-trimoxazole orally for five days. Multivariate logistic regression was used for identified risk factors associated with clinical failure. A total of 254 children were enrolled, of whom 128 cases were treated with amoxicillin while 126 with co-trimoxazole. The clinical failure for amoxicillin was significantly more than co-trimoxazole (30% vs 10%) p value > 0.001. the most risk factor which significantly associated to amoxicillin failure were pre-infection in the last 6 months, while abnormal CBC and literate mothers were associated with clinical failure of co-trimoxazole (p value > 0.05). The use of co-trimoxazole as an alternative to amoxicillin for the treatment of non-severe pneumonia in the PHCCs and conducting further studies to determine the appropriate antibiotic as the first line of defense are recommended.

Zinc-oxide (ZnO) nanostructures including nanorods are currently considered as a pioneer research of interest world-wide due to their excellent application potentials in various applied fields especially for the improvement of energy harvesting photovoltaic solar cells (PSC). We report on the growth and morphological properties of zinc-oxide (ZnO) nanorods grown on the surface of plain zinc (non-etched and chemically etched) plates by using a simple, economical, and environment-friendly technique. We apply hot water treatment (HWT) technique to grow the ZnO nanorods and varies the process parameters, such as temperature and the process time duration. The morphological, and elemental analysis confirm the agglomeration of multiple ZnO nanorods with its proper stoichiometry. The obtained nanostructures for different temperatures with different time duration showed the variation in uniformity, density, thickness and nanonorods size. The ZnO nanorods produced on the etched zinc surface were found thicker and uniform as compared to those grown on the non-etched zinc surface. This chemically etched Zinc plates preparation can be an easy solution to grow ZnO nanorods with high density and uniformity suitable for PSC applications such as to enhance the energy conversion efficiency of the photovoltaic (PV) solar cells towards the future sustainable green earth.

As the aileron mass parameter and its position on the velocity and frequency of the flutter is an important problem in design of the aircraft wings, the optimization of the composite wing with an aileron is represented in this paper. Mass properties and its distribution have a great influence on the multi-disciplinary optimization procedure based on speed and frequency of flutter. At first, flutter speed was obtained with and without aileron, then aileron was mass-equilibrated and other studies were performed using the proposed method. It is deduced that changing the position and mass properties of the aileron the speed and frequency of the flutter changed. The position of the aileron was determined for better wing performance in flutter instability and minimizing the composite stress. In the present study, it has been attempted to model the aerodynamics of the problem under ultrasound with the panel method, and the structure has been modeled using finite element method and coupled with the aerodynamics. Using the p-k method, the equations are solved and the results are extracted.

The fuel prices are increasing nowadays, causing a burden on the power system. From this, diesel generators that are still in use, must be hybridized with renewable energy (RE) to levelized the overall projects costs. This study aims to schedule an operation of a hybrid system photovoltaic (PV)/ diesel in a remote area which located in Wadi Rum district in Jordan to serve factory load in addition to obtain the best economical system combination that can serve the needs of a continuous electrical load without any interruption. Based on the results of the analysis using HOMER software, the configuration in the system will be a combination between PV modules, and diesel generator. The hybrid system has met the target for electricity production which is documented in upcoming sections.

This study provides the bibliographical analysis of the articles produced by various authors from the year 1965 to 2017. Bibliometric approach is used to analyze data that is provided through standard statistical calculations. Findings indicated that, the highest rate of researches were produced during 1980s, with the average publication of 28.6 articles each year. Findings further indicated that the ratio of male population was high in producing articles, where most of the articles were based on single authorship. The analysis of the trend in terms of article type indicated researchers high level interest in producing biographies during 90s, which was then shifted to the production of articles related to library management after the beginning of 2000. Following the findings of this study, it is suggested to encourage researchers to explore diverse topics that lacked the interest of different authors.

Objectives: Studies on the association between non-steroidal anti-inflammatory drugs (NSAIDs) and major adverse cardiovascular events (MACE) in the Arabian Gulf are scarce. The aim of this study was to evaluate the association between NSAIDs use and MACE in acute coronary syndrome (ACS) patients in the Arabian Gulf region. Methods: Data was analyzed from 3,007 consecutive patients diagnosed with ACS admitted to 29 hospitals in four Arabian Gulf countries from January 2012 to January 2013 as well as being on prior NSAIDs use during the index admission. MACE included stroke/transient ischemic attacks (TIAs), myocardial infarction (MI), all-cause mortality and readmissions for cardiac reasons. Results: The overall mean age of the cohort was 62 ± 12 years and 9.6% (n = 290) of the patients were on prior NSAID use during the index admission. At 12-months follow-up, after adjusting for confounding factors, those on NSAIDs were significantly more likely to have had MACE (adjusted OR (aOR), 1.89; 95% confidence interval (CI): 1.44-2.48; p < 0.001). Specifically, the higher event rates observed were stroke/TIA (aOR, 2.50; 95% CI: 1.51-4.14; p < 0.001) and readmissions for cardiac reasons (aOR, 2.09; 95% CI: 1.59-2.74; p < 0.001) but not MI (aOR, 1.26; 95% CI: 0.80-1.99; p = 0.320) and all-cause mortality (aOR, 0.79; 95% CI: 0.46-1.34; p = 0.383). Conclusions: NSAIDs use was associated with significant stroke/TIA events as well as readmissions for cardiac reasons. However, NSAIDs were not associated with increased MI or all-cause mortality rates in ACS patients in the Arabian Gulf.

Over 3.0 billion people of the 7.75 billion globally suffer from malnutrition due to deficiencies in micronutrients, particularly iron, zinc, and vitamins (such as vitamin A, B complex, E, and folate, etc.). In response, there is growing consumer interest in foods that provide traditional nutrients and contain additional compounds beneficial to health and well-being. Wheat is the most important cereal crop in terms of both production and consumption, contributing about 30% of total cereal consumption worldwide. It provides a significant source of carbohydrates and gluten protein (around 12-14% protein), which supply substantial energy. Wheat grain is also rich in various nutrients, such as macro-elements like phosphorus (P), potassium (K), calcium (Ca), and magnesium (Mg); microelements like iron (Fe), zinc (Zn), manganese (Mn), and vitamins B complex: thiamin (B1), riboflavin (B2), niacin (B3), pantothenic acid (B5), pyridoxine (B6), biotin (B7), folate (B9), additionally soluble fiber and other trace minerals which are higher than in other major cereals. The inner bran coats, phosphates, and other mineral salts in wheat contribute to its beneficial effects on bowel movements. Despite its nutritional benefits, the quality of wheat's nutrients is a topic of ongoing discussion. Exploring ways to enhance the nutritional quality of wheat could provide valuable insights for scientists working to improve global nutrition status.

Culinary herbs and spices are widely used in daily diets. Pakistan flora is enriched with phytochemicals due to a diverse range of land. Phytochemicals, including volatile and non-volatile compounds, have captured much interest due to their numerous health advantages and significance in daily diet. The present study aimed to conduct in-depth metabolomic profiling of Pakistani-grown fenugreek leaves (Trigonella foenum-graecum), fennel seeds (Foeniculum vulgare), mint leaves (Mentha royleana), coriander seeds (Coriandrum sativum) and basil leaves (Ocimum basilicum) by using liquid chromatography–mass spectrometry (LC-MS/MS) and gas chromatography–mass spectrometry (GC-MS). The first study was conducted to optimize extraction using different solvents (methanol, ethanol, chloroform, acetone, and water). Total phenolic content (TPC), total flavonoid content (TFC), and total condensed tannins (TCT) were quantified along with the antioxidant and anti-diabetic activities. The highest TPC (125.42 ± 10.89 mg GAE/g) and the highest antioxidant and anti-diabetic potential were quantified in mint. Seventy-one phytochemical metabolites were identified using LC-MS/MS, while forty-nine volatile constituents were identified using the GC-MS. A positive correlation was identified between phenolic contents and their biological activities. Furthermore, molecular docking helped to find drug molecules with more excellent anti-diabetic activity based on their binding affinities. This study suggests that selected medicinal herbs from Pakistan have significant nutraceutical and phytopharmaceutical potential. This study could further help in drug discovery.

Cloud computing is a strong and efficient technology facing some efficiency challenges attributable to its decentralized nature. The emergence of fog computing has subdivided the expansive cloud into numerous smaller units known as "cloudlets." Fog computing is one of the most recent advancements in today’s cloud computing landscape. Each cloudlet is a novel and diminutive architectural element extending the contemporary cloud computing infrastructure. The term "cloudlets" has been integrated with fog computing due to its augmenting impact on the attributes of cloud computing. F fog computing is a significant foundation and an indispensable cloud component. Consequently, this technology holds the potential to address efficiency concerns effectively. As a result, this paper focuses on enhancing the efficiency of the cloud computing environment by fine-tuning the efficiency parameters derived from fog computing. These parameters encompass response time, latency, and network utilization. The proposed solution involves developing a simulation system to minimize task redundancy and increase performance levels in the healthcare environment. The outcomes manifest a substantial improvement in the performance of the suggested system, with a clear increase depending on the three key parameters (response time, network utilization, and latency). Therefore, these findings are encouraging and carry significant implications, promoting the application of the proposed system in the real healthcare environment.

Malware complexity is rapidly increasing, causing catastrophic impacts on computer systems. Memory dump malware is gaining increased attention due to its ability to expose plaintext passwords or key encryption files. This paper presents an enhanced classification model based on One class SVM (OCSVM) classifier that can identify any deviation from the normal memory dump file patterns and detect it as malware. The proposed model integrates OCSVM and Principal Component Analysis (PCA) for increased model sensitivity and efficiency. An up-to-date dataset known as “MALMEMANALYSIS-2022” was utilized during the evaluation phase of this study. The accuracy achieved by the traditional one-class classification (TOCC) model was 55%, compared to 99.4% in the one-class classification with PCA (OCC-PCA) model. Such results have confirmed the increased performance achieved by the proposed model.

This paper addresses the capability to alter the wettability characteristics of poly(vinyl alcohol) (PVA) polymer films doped with glycerol. Films of PVA and glycerol-choline chloride (GCC) blends have been prepared by solution casting method with different glycerol dopants ranging from 0% to 10% (wt %). The results show that as the dopant content increases from 0% to 10%, the wettability increases and hence increases the surface energy of the solid film. The wettability changes are observed by identifying the contact angle of 10 µL deionized water droplet which altered from 55o to 28o as dopant content changed from 0% to 10% per PVA solution weight. The results show that the roughness of film surfaces increases as the content of dopant (GCC) increases in the film which indicates that roughness has a strong influence on the wettability of the casted films.

Coinfection of B virus (HBV) and hepatitis Delta virus (HDV) lead to severe forms of progressive liver diseases. However, commercially available antiviral drugs have shown considerable adverse effects and low efficacy in managing these patients. Thus, there is a pressing need to develop new, innovative, and evidence-based therapies for these pathological entities. In line with this, some investigators have attempted to develop anti-viral drugs targeting HBV/HDV coinfection. In another development, investigators have also attempted to establish immune therapy targeting for HBV infection as recovery or effective control of HBV infection also lead to efficient control of HDV infection. This review has discussed an account of the evolving antiviral and immune therapeutic drugs for HBV/HDV infection. Also, based on current scientific knowledge how we have described the pros and cons of these drugs as no suitable drug has been developed during the last forty years for treating HBV infection except the availability of two” repurposed drugs”; interferons and its derivatives and nucleoside analogs, for managing HBV or HBV/HDV coinfection. It seems that an evolving and innovative therapeutic regimen that combines both antiviral drugs and immune modulators may be the best and realistic option for management of HBV/HDV coinfection.

this paper focuses on a scientific study of the restoration, rehabilitation and reuse of the great throne hall, the most important hall in al-jawhara palace. it also aims to study the most important factors and forces of damage that affected the great throne hall, natural, biological, and human, and the resulting damage. field tests were performed, laboratory tests to determine fracture stress, liquidity and spandex limits tests, chemical analysis on soil samples and geoelectrical testing of the soil, and the results did not show caves or voids in the ground until a depth of 10.00 m, construc-tion materials were studied and tested using x-ray, (xrd), mechanical tests (tensile, shear, com-pression), and a study of the effect of seismic loads on the walls; the results showed horizontal and vertical cracks; based on the study and analysis of these cracks, it was possible to present modern techniques in restoration and reinforcement methods, and in conclusion, the researcher's recommendations.

The musculoskeletal system consisting of bones and muscles have been recognized as endocrine organs secreting hormones that are involved in regulating metabolic and inflammatory pathways. Obesity and type 2 diabetes (T2D) are associated with several musculoskeletal system complications. We hypothesized that an interaction exists between adipomyokines namely, irisin and METRNL, and various bone markers in individuals with obesity and T2D. A total of 228 individuals were enrolled in this study, including 124 non-diabetic and 104 T2D. A Multiplex assay was used to assess the level of various bone markers namely Osteoactivin, Syndecan, osteoprotegerin (OPG) and osteonectin/SPARC. Our data shows elevated levels of Osteoactivin, Syndecan, OPG and SPARC in T2D as compared to non-T2D individuals (p ≤ 0.05). Using Spearman’s correlation, irisin was positively correlated only with Osteoactivin and OPG (p &lt; 0.05). Similarly, a positive association was observed between METRNL and Osteoactivin (p &lt; 0.05). The strong positive association shown in our study between irisin, METRNL and various bone markers emphasises the strong interaction between these organs. This suggests that a dysregulation in the functional interaction between these molecules could play a possible role in the development of bone and muscle related complications that are associated with obesity and T2D.

Titania is one of the most comprehensively studied nanostructures due to its widespread applications in production of catalytic, gas- sensing and corrosion- resistance materials [1]. M-polynomial of nanotubes has been vastly investigated as it produces many degree-based topological indices which are numerical parameters capturing structural and chemical properties. These indices are used in the development of quantitative structure-activity relationships (QSARs) in which the biological activity and other properties of molecules are correlated with their structure like boiling point, stability, strain energy etc of chemical compounds. In this paper, we determine M-polynomials of single-walled titanium (SW TiO2) nanotubes and recover important topological degree based indices of them to theoretically judge these nanotubes. We also use Maple to plot surfaces associated to different types of single-walled titanium (SW TiO2) nanotubes.

This mini-review discusses the importance of microorganisms in various biological processes and the paradigm shift in researchers' perception of microorganisms' biology and genetics. Microorganisms are now understood to interact with their associated microorganisms, and advanced sequencing technology is used to study these interactions. The article highlights the importance of careful study design to efficiently generate and integrate data derived from meta-omics approaches such as (meta)genomics, (meta)transcriptomics, (meta)proteomics, and (meta)metabolomics to fully explore the extent of interactions between host organisms and their associated microbiota. The article also discusses the usefulness of metabarcoding and metagenomics in studying coral holobiont diversity and composition. While metabarcoding can comprehensively explore the genetic diversity of various biological taxa, it has limitations in classifying prokaryotes based on 16S rRNA amplicons. On the other hand, metagenomics generates vast amounts of short reads sequencing data that can be used to examine microbial diversity with greater precision and predict the possible functions of the gene set that is presented in the sample. However, the ability to link species to their functional capabilities is challenging, especially for microbes with uncertain evolutionary relationships, hidden microbes, and microeukaryotes. Finally, the article highlights the potential usefulness of these approaches in conservation biology and molecular and environmental science.

Fatty acids (FFAs) are important biological molecules that serve as a major energy source and are key components of biological membranes. Besides, FFAs play important roles in metabolic regulation and contribute to the development and progression of metabolic disorders like diabetes. Recent studies have shown that FFAs can act as important ligands of G-protein coupled receptors (GPCRs) on the surface of cells and impact key physiological processes. Free fatty acid activated receptors include FFAR1 (GPR40), FFAR2 (GPR43), FFAR3 (GPR41) and FFAR4 (GPR120). FFAR2 and FFAR3are activated by short chain fatty acids like acetate, propionate and butyrate whereas FFAR1 and FFAR4 are activated by medium and long chain fatty acids like palmitate, oleate, linoleate and others. FFARs have generated considerable attention over the last few years and have become attractive pharmacological targets in the treatment of type 2 diabetes and metabolic syndrome. Several lines of evidence point to their importance in the regulation of whole-body metabolic homeostasis including adipose metabolism. Here we summarize our current understanding of the physiological functions of FFAR isoforms in adipose biology and explore the prospect of FFAR based therapies to treat patients with obesity and Type 2 Diabetes.

Products made from petroleum-derived plastic materials are linked to many environmental problems such as greenhouse gas emissions and plastic pollution. It is desirable to manufacture products from environmentally friendly materials instead of petroleum-based plastic materials. Products made from biomass-fungi composite materials are biodegradable and can be utilized for packaging, construction, and furniture. In biomass-fungi composite materials, biomass particles (derived from agricultural wastes) serve as the substrate and the fungal hyphae network binds the biomass particles together. There are many reported studies on 3D printing of biomass-fungi composite materials. However, there are no reported studies on biodegradation of 3D printed samples from biomass-fungi composite materials. In this study, two types of biomass materials were used to prepare printable mixture hemp hurd and beechwood sawdust. The fungi strain used was Trametes versicolor. Extrusion based 3D printing was used to print samples. 3D printed samples were left for five days to allow fungi to grow. The samples were then dried in an oven for 4 hours at 120ºC to kill all the fungi in the samples. The samples were buried in the soil using a mesh bag and kept in an environmental chamber at 25℃ with a relative humidity of 48%. The weight of these samples was measured every week over the period of three months. Both types of samples (prepared from beechwood sawdust and hemp hurd, respectively) showed weight change after three months. Furthermore, the samples made from hemp hurd had more weight change than the samples made from beechwood sawdust. The SEM (scanning electron microscope) micrographs and FTIR (Fourier transform infrared) spectroscopy showed evidence of biodegradation of these samples.

Nowadays recurrent implantation failure (RIF) after invitro fertilization is common problem that reproductive specialists usually faced. The phenomenon of thin endometrium in RIF patients has yet not completely understood and properly treated. This study aimed to reveal significantly dysregulated selected genes expression between RIF patients with thin endometrium and fertile women. Endometrial samples were collected in the implantation window days (LH+7 – LH+10) of the natural menstrual cycle from RIF patients (n=20) and fertile women (n=14). Ten genes were chosen as target genes regarding their possible relations with the implantation process. Endometrial gene expression levels showed differences in RIF samples compared to fertile samples. The significant downregulation was observed for CXCL1 (p=0.005) and C4BPA (p=0.03) genes. There was no statistically significant difference between the RIF groups and the fertile group in the expression of 8 genes: CXCL8, HPRT1, MMP10, INFG, VEGFB, HAND2, IL15 and TNC (p&gt;0.05). The use of a combination of two markers (C4BPA + CXCL1) allows for good discrimination of RIF patients from fertile women (AUC 0.806).

In response to a threefold increase in osteoporotic vertebral fractures (OVF) at our institution over the past decade and the subsequent development of new fractures within a year in a third of cases, we evaluated the effectiveness of STIR MRI scans in conjunction with CT scans for initial OVF diagnosis. This study, conducted over five months, involved full spine sagittal STIR MRI scans alongside CT scans for patients over 50 with minor injury-related vertebral fractures. The independent assessments by radiologists and neurosurgeons of 64 patients revealed that while CT scans identified 161 fresh fractures, of which only 68 were previously reported, MRI detected 266 fractures, 1.65 times more than CT. CT scans showed single fractures in 27% of patients and multiple fractures in 73%, whereas MRI identified single fractures in 9% and multiple fractures in 91% of patients. Additionally, MRI demonstrated a 1.5-fold increase in adjacent fracture detection. The use of MRI influenced treatment plans in 67% of cases. Given these findings, we advocate for including a STIR MRI of the entire spine alongside CT scans in OVF cases, as it significantly enhances fracture detection and can alter treatment strategies.

Inclusive education recognizes the diverse needs of students and ensures that each student is pro-vided with equal opportunities to learn and succeed. The Dubai government has implemented an inclusive education policy aimed at promoting equity and inclusivity in schools. This study aimed to investigate school leaders' understanding, implementation, and perspectives on the Dubai Inclusive Education Policy Framework (DIEPF). To gather data, a qualitative research study was conducted using semi-structured interviews with ten school leaders from private schools located in Dubai, United Arab Emirates (UAE). The findings show that school leaders have a strong understanding of the policy and deem it to be significant. The study also found evidence of effective strategies implemented by school leaders to promote inclusive education. However, there are challenges in the UAE that resonate with those worldwide such as inadequate funding, high student-teacher ratios, shortage of specialized staff, and limited training opportunities for teachers. These findings emphasize the significance of ongoing professional development and training of educators who are involved in inclusive education. Implications for practice and suggestions for future research are provided.

Obesity, type 2 diabetes, and different forms of cancers are among the leading human diseases and highly complex in terms of diagnostic and therapeutic approaches. Diabetes and cancer are among the most frequent and complex diseases and based on epidemiological evidence and study it can be concluded that the patients suffering from diabetes are considered to be significantly at higher risk for a number of cancer types. Both these diseases are among the highly complex and heterogeneous in nature. There are a number of evidences which support the hypothesis that these diseases interlinked and obesity may aggravate the risk(s) of both these diseases type 2 diabetes and different types of cancers. Multi-level unwanted alterations such as (epi-)genetic alterations, changes at the transcriptional level, and altered signaling pathways (receptor, cytoplasmic, and nuclear level) are the major source which promotes a number of complex diseases and such heterogeneous level of complexities are considered as the major barrier in the development of therapeutic. With so many known challenges, it is critical to understand the relationships and the common shared causes between type 2 diabetes and cancer which is difficult to unravel and understand. Furthermore, the real complexity arises during diagnosis from contended corroborations that specific drug(s) (individually or in combination) during diagnosis process of type 2 diabetes may increase or decrease the cancer risk or affect cancer prognosis. In this review article, we have presented the recent and most updated evidences from the studies where the origin, biological background, correlation between them have been presented or proved. Furthermore, we have summarized the methodological challenges and tasks that are frequently encountered. we have also outlined the physiological links between type 2 diabetes and cancers. Finally, we have presented and summarized the outline of the hallmarks for both these diseases diabetes and cancer.

Cancer ranks second among the causes of mortality worldwide,following cardiovascular diseases.Brain cancer, in particular, has lowest survival rate of any kind of cancer. Brain tumours vary in their morphology, texture, and location, which determine their classification. Accurate diagnosis of the tumour category enables physicians to select optimal treatment strategies and potentially prolong patients’ lives. Researchers who also implemented deep learning models for diagnosing diseases in recent years largely focused on deep neural network optimization to enhance neural network performance. This implicates implementing models with the best performance and incorporating various network architectures by configuring their hyperparameters. This paper presents a novel hybrid approach method for improved brain tumour classification by combining CNN and EfficientNetV2B3 as feature extraction, followed by (KNN) for classification. To evaluate the recommended method’s efficacy, two widely known benchmark MRI datasets were utilized in the experiments. The initial dataset consisted of 3064 MRI images depicting meningiomas,pituitary,and gliomas tumours.Images from two classes of normal brain and brain tumour were included in the second dataset, which was obtained from Kaggle.In order to enhance performance even more, the study concatenates the CNN and EfficientNetV2B3 flattened outputs before feeding them into the KNN classifier. The proposed framework run on two different dataset and demonstrates outstanding performance with an accuracy of 99.51% and 99.8% on each dataset.

Cooperative learning (CL) is a teaching and learning pedagogy that has been used widely in school but there is limited information on instructors’ perceptions of CL nor observations of how CL is implemented in higher education settings. In this study, we investigated the ad-vantages and challenges of embedding CL into instructors’ teaching in Iran and Australia. Data were collected through interview and observation. Results showed that despite challenges such as the lack of familiarity of CL and how it can be implemented in university curricula, issues associated with assessment, and time constraints, CL created an interactive, pleasant and safe environment for deep learning in both countries. The findings showed that there were challenges in Iran such as a tendency to use traditional approaches to teaching, insufficient understanding of how to establish teamwork, and a lack of up-to-date teaching resources. In Australia, changing courses, working with external students, catering for individual differences, and building positive relationships were some of the challenges of implementing CL. We believe that these challenges can be overcome if university instructors are prepared to address them.

With the global increase of photovoltaic (PV) modules deployment in recent years, the need to explore and realize their reported failure mechanisms has become crucial. Despite PV modules being considered reliable devices, failures and extreme degradations often occur. Some degradations and failures can be minor and cause no critical harm if within the expected range. Others, may start mildly and then deteriorate faster to become catastrophic, especially in harsh environments. This paper conducts a state-of-the-art literature review to scan PV failures, types, and their root cause based on PV’s constructed components (from protective glass to junction-box). It outlines the hazardous consequences beyond PV module failures, describing what harm they can bring to the PV system. As we delve into the literature, it becomes clear that every component is vulnerable to certain types of failures; some can deteriorate within themselves, and others infect further PV components resulting in emerging more severe failures. In the end, the review briefly summarises PV failure detection techniques, emphasising electrical characterization techniques, and disclosing the need to engage more electrical parameters. Most importantly, this review can prepare the stage for the PV research community to identify the most prevalent degradation processes. This, in turn, encourages researchers to investigate them throughout modelling and experimental studies to forecast them at the early onset in order to protect the PV systems from hazardous malfunctions.

Educational institutions must identify students who are academically struggling to provide them with necessary support to improve their performance. In this context, recommendation systems powered by deep learning techniques are vital for detecting and categorizing such students. These systems help students plan their future by uncovering patterns in their historical academic data. This study introduces a new deep learning model designed to classify academically underperforming students in educational settings. The model incorporates a Gated Recurrent Neural Network (GRU) and includes specific neural network features like a dense layer, max-pooling layer, and the ADAM optimization algorithm. The model's training and evaluation were conducted using a dataset comprising 15,165 student assessment records from various academic institutions. The performance of the developed GRU model was benchmarked against other educational recommendation systems, including Recurrent Neural Network models, AdaBoost, and the Artificial Immune Recognition System v2. The proposed GRU model demonstrated remarkable accuracy, achieving an overall rate of 99.70%.

Abstract: In recent years, the construction engineering sector has undergone a transformative shift towards the integration of machine learning (ML) techniques, particularly in predicting the properties of steel fiber-reinforced concrete (SFRC). Despite the theoretical sophistication of existing models, a persistent challenge remains – their opacity, lacking transparency and real-world relevance for practi-tioners. To address this gap and advance our current understanding, this study employs the extra gradient (XG) Boosting algorithm, crafting a comprehensive ap-proach. Grounded in a meticulously curated database drawn from 43 seminal pub-lications, encompassing 420 distinct records, this research focuses predominantly on three primary fiber types: crimped, hooked, and mil-cut. Complemented by hands-on experimentation involving 20 diverse SFRC mixtures, this empirical campaign is further illuminated through the strategic use of Partial Dependence Plots (PDPs), revealing intricate relationships between input parameters and con-sequent compressive strength. A pivotal revelation of this research lies in the identification of optimal SFRC formulations, offering tangible insights for real-world applications. The developed ML model stands out not only for its sophistication but also its tangible accuracy, evidenced by exemplary performance against inde-pendent datasets, boasting a commendable mean target-prediction ratio of 99%. To bridge the theory-practice gap, we introduce a user-friendly digital interface, thri-ughly designed to guide professionals in optimizing and accurately predicting the compressive strength of SFRC. This research thus contributes to the construction and civil engineering sectors by enhancing predictive capabilities and refining mix designs, fostering innovation, and addressing the evolving needs of the industry.

The mechanism of ciprofloxacin action involves interference with transcription and replication of bacterial DNA, which results in elevated oxidative stress, and bacterial cell death. Vorinostat was shown to induce oxidative DNA damage. In the current work, the possibility for interactive effect of vorinotat on ciprofloxacin-induced cytotoxicity against a number of reference bacteria was investigated. Standard bacterial strains were Escherichia coli ATCC 35218, Staphylococcus aureus ATCC29213, Pseudomonas aeruginosa ATCC 9027, Staphylococcus epidermidis ATCC 12228, Acinetobacter baumannii ATCC 17978, Proteus mirabilis ATCC 12459, Klebsiella pneumoniae ATCC 13883, methicillin-resistant Staphylococcus aureus (MRSA) (ATCC 43300), and Streptococcus pneumoniae (ATCC 25923). The antibacterial activity of ciprofloxacin with or without pretreatment of bacterial cells by vorinostat was examined using disc diffusion procedure and determination of the minimum inhibitory concentration (MIC) and zones of inhibition of bacterial growth. All tested bacterial strains showed sensitivity to ciprofloxacin. When pretreated with vorinostat, significantly larger zones of inhibition and smaller MIC values were observed in all bacterial strains compared ciprofloxacin alone. As a conclusion, current results showed the possible agonistic properties for vorinostat when it is used together with ciprofloxacin. Future research will be focus on molecular mechanisms possible for such interactive effect.

Objective: Rheumatoid Arthritis (RA) is a chronic inflammatory disease affecting the synovium and articular cartilage that initiates joint damage. RA associates with a change in many inflammatory biomarkers. The present study aims to measure the levels of inflammatory adipocytokines (chemerin and visfatin) and their ratio in addition to some related biomarkers in RA patients group in comparison to healthy control group and find out their efficacy in diagnosis of RA.Methods: The study included 60 RA patients and 30 healthy control group. Serum visfatin and chemerin were measured by using ELISA technique, while other biomarkers were determined spectrophotometrically. Multivariate general linear model analysis and Receiver operating curve was used to study the opportunity of using chemerin and visfatin as diagnostic tools for RA.Results: The results indicated that there was a significant increase (p<0.05) in all lipid profile components, except HDLc that decreased, in RA patients in comparison with healthy control group; while significant decrease (p<0.001) in high density lipoprotein-cholesterol of RA patients in comparison with control group. Serum chemerin, visfatin, C-reactive protein, and uric acid levels were significantly higher (p<0.05) in RA patients than those of control group. The results showed a relatively good sensitivity and specificity of chemerin (sensitivity=88.1, specificity=75.9) at a concentration=187.88ng in diagnosis of RA.Conclusions: chemerin is able to diagnose RA efficiently but this diagnoses, due to relatively small specificity, may interfere with other inflammatory disorders. However, with adjuvant with other diagnostic parameters, chemerin may represent a useful addition in diagnosis of RA.

The Impact of Event Scale-Revised (IES-R) is the most popular measure of post-traumatic stress disorder (PTSD), which has been recently validated in Arabic. This instrumental study aimed to determine optimal cutoff scores of the IES-R and its subscales in Arab samples of psychiatric patients (N = 168, 70.8% females) and healthy adults (N = 992, 62.7% females) from Saudi Arabia during the COVID-19 pandemic as an ongoing collective traumatic event. Based on a cutoff score of 14 of the Depression Anxiety Stress Scale 8-items (DASS-8), receiver operator curve (ROC) analysis revealed two optimal points of 39.5 and 30.5 for the IES-R in the samples (area under the curve (AUC) = 0.86 &amp; 0.91, p values = 0.001, 95% CI: 0.80-0.92 &amp; 0.87 to 0.94, sensitivity = 0.85 &amp; 0.87, specificity = 0.73 &amp; 0.83, Youden index = 0.58 &amp; 0.70, respectively). Different cutoffs were detected for the six subscales of the IES-R, with numbing and avoidance expressing the lowest predictivity for distress. Meanwhile, hyperarousal followed by the irritability expressed stronger predictive capacity for distress than all subscales in both samples. In path analysis, pandemic-related irritability resulted from direct and indirect effects of key PTSD symptoms (intrusion, hyperarousal, and numbing). Irritability contributed to traumatic symptoms of sleep disturbance in both samples while the opposite was not true. The findings suggest usefulness of the IES-R at a score of 30.5 for detecting adults prone to trauma related distress, with higher scores needed for screening in psychiatric patients. Various PTSD symptoms may induce dysphoric mood, which represents a considerable burden that may induce circadian misalignment and more noxious psychiatric problems/ co-morbidities (sleep disturbance) in both healthy and diseased groups.

Reproductive disorders are a common event in modern reproductive medicine, occurring both in spontaneous and assisted pregnancies. Studies of the molecular mechanisms of implantation disorders in thin endometrium, including the study of gene transcriptional activity, have shed light on the identification of potential biological markers of endometrial receptivity. Background/Objectives: to reveal significantly dysregulated selected genes expression between RIF and RPL patients with thin endometrium. Methods: Endometrial samples were collected in the implantation window days (LH+7 – LH+10) of the natural menstrual cycle from RIF patients (n=20) and RPL patients (n=19). Ten genes were chosen as target genes regarding their possible relations with the implantation process. Total RNA was purified, reverse-transcribed; gene expression was quantified by RT-PCR. Results: The expression of the IL-15, INFG and HPRT1 genes were significantly decreased in RIF with thin endometrium patients compared to the RPL patients (log2 fold change=0.92, p=0.023 for IL-15, log2 fold change=1.24, p=0.046 for INFG, and log2 fold change=0.579, p=0.046 for HPRT1). There were not significant differences in expression of CXCL8, CXCL1, MMP10, C4BPA, TNC, VEGFB and HAND2 genes between groups. Conclusions: decreased expression of IL-15, INFG and HPRT1 genes was found in patients with RIF with thin endometrium compared to the endometrium of women with RPL. This has practical significance for clinicians for differentiated prescription of immunomodulatory therapy in patients undergoing ART programs.

Introduction: Infection of a wound during the thirty days after surgery is considered a surgical site infection (SSI). Because of lack of large studies or documented guidelines for SSI after surgery, we aimed to study risk factors and comorbidities that may lead to SSI.Methods: A cross-sectional study was conducted in one month (May, 2023) included 111 patients. All patients underwent to either abdominal or urological surgeries. Inclusion criteria were: patients aged 18 or older, any type of abdominal or urological open surgery, and no documented history of infection at surgical site infection.Results: we found 24 (21.6 %) patients out of 111 developed SSI after surgery. Male predominance was clear in this study. The number of patients with age 40 years or less was 60 (54 %) and 10 of them developed SSI (14.2 %).Patients who stayed more than 24 hour of preoperative at hospital were less in number than patients who did not (36.9% vs. 63%; p=0.002) respectively. Patients with emergency procedure were 12 patients (10.8 %) in contrast to 99 patients (89.1 %) who underwent a planned surgery (p-value= 0.003). Conclusion: our study revealed a higher incidence of SSI after surgery. Older patients with comorbidities, preoperative stay, emergency surgery, male sex are all correlated to the developing SSI.

Background: Abdominal wall hernias are a common condition that is seen in daily general surgery patients. However, still more researches are needed to be conducted regarding hernias. The aim of this study is to see the prevalence of hernias among patients admitted to the Department of Surgery of a tertiary care center. Methods: A descriptive cross-sectional study was performed among patients who admitted to the department of surgery in a tertiary care center between 1 August 2023 and 20 September 2023. All patients data were extracted to an excel sheet. Results: We had 760 patients who visited in this period. Only 272 patients (27.9 %) were diagnosed with hernias. We found 52.6 % of patients were male and 47.4 % of patients were female. The age between 46- 60 years old was the most to have hernias (97 patients). Inguinal hernias were the common among other types. Diabetes mellitus, hypertension, COPD, and hydrocele were found in 10.7 % of all patients. Conclusion: The prevalence of hernias in this study was nearly to other studies that conducted in the same conditions. Early diagnosis and patient’s education are the corner stone to prevent morbidities and mortalities.

Background: Community-based medical education (CBME) is an essential component of medical education, where primary healthcare physicians (PHPs) play a crucial role. This study explores PHPs' awareness and engagement in CBME and investigates the factors influencing their participation. Methods: This mixed study was conducted in two phases. In the first phase, a qual-itative study was conducted using semi-structured interviews with PHPs, and thematic analysis related to their awareness and engagement in CBME. In the second phase, a quantitative survey was conducted among 72 PHPs pre- and post-training programs. Results: Primary healthcare physicians had a positive attitude toward community-based medical education. The participants have an acceptable level of awareness and engagement, which increased substantially (p-value = 0.03) and (p-value = 0.003), respectively. Logistic analysis indicated that non-Saudi physicians were likelier to participate in the CBME (p-value=0.001). Professions and academic experiences influence their willingness and engagement to participate in CBME (OR= 7.5, p-value=0.001) and (OR=0.21, p-value=0.001), respectively. Conclusion: The study findings highlighted the importance of increased awareness and the factors that enhance PHPs' engagement in CBME. This positive perspective of the PHPs helps build effective partnerships and facilitates the extension of the curriculum to apply CBME.

Carbon nanotubes (CNTs) can be considered as semi-rigid all-carbon polymers. However, unlike conventional polymers that can form 3D networks such as hydrogels or elastomers through crosslinking with each other in solution, the cylindrical carbon lattice of CNTs was not believed to be directly crosslinkable in solution until our recent discovery of UV-defluorination driven direct CNT crosslinking. In this study, we further reveal that the UV-defluorination-driven crosslinked CNTs are metastable and can decompose more readily than fluorinated or pristine CNTs upon exposure to Raman laser irradiation. Specifically, we investigate the stability of UV-defluorinated single-walled and multi-walled fluoro-nanotubes using Raman spectroscopy under controlled varying laser power. The results indicate that both the defluorinated single-walled and multi-walled CNTs are thermally less stable than pristine CNTs or untreated fluorinated CNTs, which can be attributed to the strains on the crosslinking bonds created from the curved carbon lattice of linked CNTs. This instability, particularly evident under high-power laser irradiation, leads to combustion processes ignited at relatively lower temperatures that cause an extended burned area centered on the laser spot, offering potential future applications as mechanically robust, lightweight materials with feasible post-use degradation options.

Spinal metastatic tumors are common and often cause debilitating symptoms. Image-guided percutaneous thermal ablation (IPTA) has gained significant recognition in managing spinal column tumors due to its exceptional precision and effectiveness. Conventional guidance modalities, including computed tomography, fluoroscopy, and ultrasound, have been important in targeting spinal column tumors while minimizing harm to adjacent critical structures. This study presents a novel approach utilizing a fusion of Cone Beam Computed Tomography with Magnetic Resonance Imaging to guide percutaneous thermal ablation for four patients with secondary spinal column tumors. The visual analog scale (VAS) evaluated procedure effectiveness during an 18-month follow-up. Percutaneous vertebroplasty was performed in two cases, and a thermostat was used during all procedures. Imaging was performed using the Stealth Station navigation system Spine 8 (SSS8) and a 1.5T MRI machine. The fusion of CBCT with MRI allowed precise tumor localization and guidance for thermal ablation. Initial results indicate successful tumor ablation and symptom reduction, emphasizing the potential of CBCT-MRI fusion in spinal column tumor management. This innovative approach is promising in optimizing therapy for secondary spinal column tumors. Further studies are necessary to validate its efficacy and applicability.

The considerable biological and medicinal activities of pyridazines has stimulated considerable research on efficient syntheses of these derivatives. In the last decade, microwave irradiation has generally been used for the energy source. As demonstrated in recent studies, pressure reactor “Q-tubes” may be used to accelerate several of these reactions in a more optimal and safer manner (compared to microwaves). In these studies there has been postulated a pathway for the formation of pyridazino[5,4,3-de][1,6]naphthyridine derivatives . In this paper we consider this pathway, and an alternate pathway, for several reactions. Contrary to the suggestion in these studies the pathway in which initial dimerization of malononitrile was postulated could be excluded based on chemical evidence. The reactions performed were the reaction of arylhydrazonals 1a,b with benzylidinemalononitrile which afforded in Q-tube the 3-acyl-4-aryl-1-phenyl-6-amino-1,4-dihydropyridazines, and the reaction of arylhydrazonals 1a,b, malononitrile 9 and aromatic aldehydes 10a-g in Q-tubes which afforded the tricyclic systems 12a-n whose structure could be established by X-ray crystal structure determination. In conclusion, we have added to the work of the recent studies by excluding a reaction pathway for one of their reaction products.

Water resources worldwide are limited, especially in desert areas like Saudi Arabia. Therefore, the rational and sustainable management of irrigation water supply is an imperative required by the conditions of space and time. This study evaluates the irrigation system through partial root-zone drying (PRD) and regulated deficit irrigation (RDI). The effect of applying the PRD and RDI systems on the efficiency and rationalization of irrigation water consumption in a greenhouse and open field cucumber was studied in addition to using the surface (S) and subsurface (SB) drip irrigation methods on irrigation efficiency. The productivity of the RDI-S regular drip irrigation treatment was considered 100% as the control on which the results of all treatments are measured. The results showed that in terms of irrigation technique, the PRD-SB technique had the highest productivity during the winter season in greenhouse cucumbers, with a general average of 13.8 kg m-2 for all irrigation levels, while the RDI-SB technique had the highest productivity during the summer season, with a general average of 16.1 kg m-2. Regarding irrigation level results, the study showed that an irrigation level of 100% is the highest productivity in all irrigation techniques, with a general average of 14.9 kg m-2 for all irrigation techniques during the winter season and 16.4 kg m-2 during the summer. However, the increase in the irrigation level to 150% did not increase productivity. In comparison, the application of the deficit irrigation technique by reducing the level of irrigation to 50% was not accompanied by a similar decrease in productivity. The study results also showed that irrigation with the PRD-SB system was the most productive in the open field at all irrigation levels, with a general average of 7.3 kg m-2. The general average of the percentage decrease in productivity in all irrigation techniques compared to reducing the irrigation percentage to 50% and 75% was 22% and 3 %. The irrigation efficiencies were higher when applying the PRD (PRD-SB) in winter. In contrast, applying a deficit irrigation system (RDI-SB) in the summer season had the highest efficiency. It could be concluded that using PRD and RDI systems for indoor and outdoor cucumber can save irrigation water.

The purpose of this study was to conduct a meta-analysis that shows the influence of fiber on ultimate compressive strength and tensile strength of ultra-high performance concrete. The internet scholarly search engines and ScienceDirect article references were used to illustrate the papers concerning the experimental investigations of mechanical properties of ultra-high strength concrete with and without fiber with clearly, completely and comparative raw data. The normal concrete test results were dismissed from this search. Seven trials were identified based on the adopted inclusion and exclusion criteria above. The meta-analysis based on standardized mean difference was carried out on the basis of a fixed-effects model for the major outcomes of the ultimate compressive and tensile properties of ultra-high performance concrete. A total of 888 test specimens were enrolled in these seven trials. The combined analysis yielded a sign of a significant improvement in ultimate compressive strength and tensile strength of ultra-high strength concrete with fiber addition of 2% by concrete volume. The summary effect size of ultimate compressive strength was 2.34 while a more improvement in term of tensile strength with effect size of 2.64. By addition fiber of 2% provides a significant benefit in mechanical properties of ultra-high performance concrete.

This paper addresses the conceptual exploration of various issues that form an integral part of the ethical dimensions surrounding the use of artificial intelligence (AI) in the field of marketing. We critically review some of the main ethical challenges AI poses to humanity: privacy, data security, bias, transparency, and accountability. Therefore, we will discuss the delicate balance between exploiting the transformation potential of AI for personally designed marketing strategies and ethical imperatives to safeguard the rights of consumers to retain trust. Then, the present regulatory landscape responding to these ethical challenges will be assessed by building on effective regulation, like the GDPR, existing proposed legislative frameworks, and industry guidelines. To underscore the role of an ongoing dialogue between marketers, technologists, ethicists, and regulators for developing a responsible AI ecosystem in marketing. Further, strategic recommendations for implementing company-based ethical AI marketing practices. The further strong guidelines provide enhancement transparency to consumers and investment in research to remove biases from algorithms. It also underscores principal scopes of further research and development, focusing on the need for new-age solutions to guide the ethical quagmires that AI-led marketing throws up. We suggest that integration should be done proactively and collaboratively. Thus, if attention is paid more to ethics and multidisciplinary dialogue, only such hyperbolic promises can be realized by AI-driven marketing. There are such promises through which AI-driven marketing will meet business goals and be huge at societies' values.

Introduction: These days, obesity is considered an important factor for many medical problems such as diabetes mellitus, cardiovascular diseases and joint degeneration. Obesity is one of the leading causes of osteoarthritis and the need for arthroplasty. We aim to study the effect of obesity and the duration of knee replacement surgery.Method: A cross-sectional study was conducted at the orthopedic department between February 2023 and July 2023. We had 68 patients who underwent total knee replacement surgery. Variables like age, gender, smoking history, ASA grade, BMI, and side of injury (unilateral or bilateral) were studied.Results: Out of 68 patients, we had 37 (54.4 %) of patients were female. The most common age group was 44- 54 years. 60.3 % of patients were non-smokers. We had 50 patients with unilateral injury and the rest were bilateral. ASA grade II (51 patients) were more than ASA grade I (17 patients). In this study, 41 patients were obese and the duration for total knee replacement was 90 - 120 minutes, in contrast to overweight patients (75 – 90 minutes) and normal patients (60-75 minutes).Conclusion:We found a significant correlation between BMI and the duration of total knee replacement surgery. The time could be doubled if the arthroplasty was bilateral.

Traumatic brain injury (TBI) is among the leading causes of mortality and long-term impairment globally. TBI has a dynamic pathology encompassing a variety of metabolic and molecular events that occur in two phases, primary and secondary. An external forceful blow to the brain initiates the primary phase, which is followed by a secondary phase that involves the release of calcium ions (Ca2+) and the initiation of a cascade of inflammatory processes, including mitochondrial dysfunction, rise in oxidative stress, activation of glial cells, and damage to the blood-brain barrier (BBB), resulting in paracellular leakage. There is currently no FDA-approved drug for TBI, but existing approaches rely on delivering small and macromolecular treatments, which are severely constrained by the BBB, poor retention, off-target toxicity, and complex pathology of TBI. Therefore, there is a demand for innovative and alternative therapeutics with effective delivery tactics for diagnosis and treatment of TBI. Tissue engineering and use of biomaterials is one such alternative approach. With this approach, neuronal stem cell therapy is combined with synthetically generated tissue materials such as hydrogels, self-assembling peptides, and electrospun nanofibers, which may induce neurite outgrowth, differentiation of human neural stem cells, and nerve gap bridging in TBI. This review examines tissue engineering and the use of biomaterials as potential treatments for TBI, including their synthesis, mechanisms of action, and limitations. The review also discusses challenges facing tissue engineering and biomaterial technology including survival rate of transplanted stem cells and the development of biodegradable, biocompatible, and mechanically flexible biomaterials. A better understanding of the mechanisms and drawbacks of these novel therapeutic approaches will help guide the design of future TBI therapies.

Ti-Al based alloys, particularly TiAl and Ti3Al two-phase alloys, have garnered significant attention as potential replacements for various high-temperature structural materials due to their exceptional properties, including low density, oxidation resistance, and high strength at elevated temperatures. Despite these advantages, experimental studies on the microstructure evolution of Ti-Al based alloys under complex conditions remain challenging to observe and characterize. This review article examines the current research on molecular dynamics (MD) simulations of Ti-Al based alloys, focusing on two-phase Ti-Al alloys, Ti-Al amorphous alloys, Ti-Al composite materials, and the welding and multi-layer/film applications of Ti-Al alloys. The review highlights the unique capabilities of MD simulations in predicting the behavior of Ti-Al based alloys and addresses existing scientific challenges. Furthermore, the article discusses future research directions and development prospects in this field.

The emergence of novel coronavirus (SARS-CoV-2) in marked as the highest pathogenic coronavirus that has crossed from the hosts to the human population in the twenty-first century. The spreading of COVID-19 in different chinese cities and around the world is travel-related viral spread with the unprecedented nosocomial outbreaks. It has also shown with high case-fatality rates, indeed to urgent prophylactic and therapeutic settings. Scientific advancements of the SARS-CoV-2 pandemic allowed for rapid progress to understand the epidemiology and pathogenesis of SARS-CoV-2. This review highlights the the genomic structure of SARS-CoV-2 with the proposed roles of genotype and phenotype of SARS-CoV-2 in pathogenesis and discuss recent results supporting treatment strategies of COVID-19 with a special focus on how these new insights may facilitate rational development of SARS-CoV-2 for targeted therapies in the future.

Introduction: Bone fractures may be the result of high force impact or stress, or a minimal trauma injury as a result of certain medical conditions that weaken the bones, such as osteoporosis, osteopenia, bone cancer, or osteogenesis imperfecta, where the fracture is then properly termed a pathologic fracture. Bone cancer can be primarily or secondary to metastasis. Case presentation: We report a rare case of left humerus fracture in a 59-year-old male patient due to metastatic renal cell carcinoma. Our patient had no important past medical history. He suffered from two months of left arm pain, moderate disability and fever at night. Analgesics consumption resulted in minimal relieve. Trauma history was negative. X-ray of the left arm showed an osteolytic lesion with humerus fracture. Abdominal computed tomography with contrast showed right renal mass.Radical right nephrectomy was performed in addition to alignment nailing of the left humerus fracture with biopsy. Pathology report documented clear cell carcinoma with metastatic bone. The treatment was completed by chemotherapyDiscussion: Secondary bone tumors are metastatic lesions which have spread from other organs, most commonly carcinomas of the breast, lung, and prostate, and rarely from kidney. In some cases, bone metastasis could be the first symptoms of renal cell carcinoma. Conclusion: suspected pathological bone fractures should be investigated completely. It may hide a tumor as a cause.

Abstract: The study aimed to investigate the antitumor efficacy of anti-LMP1 antibodies in EBV-positive nasopharyngeal and stomach cell lines and xenograft models. The study also exam-ined the NF-κB expression and cell cycle activation of NPC serum exosome-associated LMP1. An-ti-LMP1 antibody treatment before or during cell implantation prevented tumor growth in nude mice. A small dose of antibodies resulted in complete tumor regression for at least three months af-ter the tumors had grown in size. The consumption of antigen-antibody complexes by tumor cells limited tumor growth. In vitro experiments showed that anti-LMP1 antibodies killed EBV-positive NPC- or GC-derived epithelial cell lines and EBV-positive human B cell lines but not EBV-negative cell lines. Treatment with anti-LMP1 reduced NF-κB expression in cells. The animal model experi-ments showed anti-LMP1 inhibited and prevented NPC- or GC-derived tumor growth. The results suggest that LMP1 antibody immunotherapy could cure nasopharyngeal cancer, EBV-positive gastric carcinoma, and EBV-associated lymphomas. However, further validation of these findings is required through human clinical trials.

In 1789, the Annonaceae family was cataloged by de Jussieu. It encompasses tropical and subtropical plants which are widespread in distribution across various continents such as Asia, South and Central America, Australia and Africa. The genus of Annona is one of the 120 genera of the Annonaceae family and contains more than 119 species of trees and shrubs. The majority of these species are found in tropical America with more than 105 species (26 of them are endemic). Due to its edible fruits and medicinal properties, Annona is the most important genus of Annonaceae family. Despite Annona having many species, only limited species of this family are economically important such as A. squamosa L. (sugar apple), A. cherimola Mill. (Cherimoya), A. muricata L. (guanabana or soursop), A. atemoya Mabb. (atemoya), a hybrid between A. cherimola and A. squamosa, A. reticulata L. (custard apple), A. glabra L. (pond-apple) and A. macroprophyllata Donn. Sm. (ilama). Phytochemically, several classes of secondary metabolites such as acetogenins, essential oils, alkaloids, terpenoids and flavonoids have been described in this genus. A variety of pharmacological activities have been reported from various parts of Annona species specially leaves and seeds including applications against antibacterial, anticancer, antidiabetic and anti-inflammatory.

The purpose of this study was to examine the problem of violent extremism among young people. Additionally, a youth violent extremism scale (YVES) was developed that takes into account the differences between and within Arab cultures. The goal was to produce a scale that could be used and tested within an Arab country or between Arab countries. The scale was developed in three stages: generation, refinement, and validation. A literature review and nomological network were utilized to show the scale's dimensions, correlations to those dimensions, and other relevant variables (such as the LSC, LSE, and criminality scale). A sample of 6726 young students from fifteen Arab countries and the authorities involved were selected. Findings showed that six factors were obtained through principal component factor analysis using Varimax and Kaiser normalization (29 items). A significant positive association was found (r=.651, p = 0.000), supporting the scale's validity. Using Cronbach's alpha, the scale reliability was strong and assessed at 0.98. The scale's construct validity was estimated by assessing the correlation between the Youth Violent Extremism scale and low self-control. A significant positive correlation (r=.651, p = 0.000) indicates the scale's validity. Findings showed significant differences between males and females in youth violent extremism (F = 13.678, α ≤0.000). Descriptive results showed, however, that females have a slightly higher mean of violent extremism than males (M =85.2 vs. 87.6), with a close variation (26 vs. 27) for males and females, respectively. In this study, a measurement tool was provided that can be used as a knowledge base for security strategies. The scale can be applied to identify legal, social, and educational policies and applications of violent extremism. Future research is needed to test the scale on different professions like teachers, police officers, and parents. Also, a need to test the scale on different age groups, settings, and cultures. A need for atheoretical and empirical framework for understanding and preventing youth violent extremism through promoting a more cohesive and resilient youth society.

The traditional standards employed for pain assessment have many limitations. One such limitation is reliability because of inter-observer variability. Therefore, there have been many approaches to automate the task of pain recognition. Recently, deep-learning methods have appeared to solve many challenges, such as feature selection and cases with a small number of data sets. This study provides a systematic review of pain-recognition systems that are based on deep-learning models for the last two years only. Furthermore, it presents the major deep-learning methods that were used in review papers. Finally, it provides a discussion of the challenges and open issues.

This study aims to formulate binary cementitious systems containing silica fume (SF) and micro quartz (MQ) to improve cementitious concrete's durability and mechanical properties. In this investigation, we examined the effects of different essential variables, such as the level of SF and MQ replacement and the ratio of the water-binder (w/b). In this study, the w/b ratios were 0.25, 0.3, 0.35, and 0.4. Replacement levels for SF were 8, 10, and 12%, while replacement levels for MQ were 5, 8, 10, 15, 25, and 35%. The porosity and permeability decreased with an increase in replacement levels, regardless of the type of fine material used or the amount of replacement. Meanwhile, the strength increased markedly with SF replacement, reaching its maximum MQ of 25% at the SF level. The strength of the SF mixing was the highest in all mixes, and it remained the highest until 15% of MQ was replaced. The ultrafine size of MQ particles contributes to the improvement of compressive strength, porosity, and permeability in a similar way to SF particles, despite their high crystalline structure. Furthermore, in this study, analysis of variance (ANOVA) was employed to verify the influence of each variable on the studied response.

While significant efforts have been made to recycle metals like lithium or cobalt for sustainable development in the battery industry, other high-value materials in the renewable energy sector, such as fluorinated carbon nanotubes (FCNTs), have not been adequately explored for re-utilization after their quality has been downgraded. FCNTs are expensive and energy-intensive to produce, making their sustainable use crucial. This study explores the potential of reusing quality-downgraded fluorinated carbon nanotubes (QD-FCNTs) as eco-friendly nano-additives in microgel composites for water retention applications. By employing a surface treatment process that avoids additional energy costs and environmentally harmful chemicals, we successfully enhanced the interaction between QD-FCNTs and microgels. This treatment significantly improved water retention time by reducing rapid evaporation, enabling sustained water release. Our findings demonstrate a promising avenue for the sustainable application of quality-downgraded fluorinated carbon nanotubes in agricultural and environmental technologies.

Background and aims: For many surgical procedures, spinal anesthesia is a reliable and efficient anesthetic approach. Numerous drugs have been reported to be administered to intrathecal local anesthetics as adjuvants to increase the efficacy of spinal anesthesia. There is little evidence of the effect of intrathecal dexmedetomidine on pain scores and the consumption of analgesia postoperatively. Methods: After obtaining ethical approval, demographical and clinical data of patients who underwent surgical procedures under spinal anesthesia with intrathecal dexmedetomidine or fentanyl was collected and analyzed. Results: In this study with 96 patients, intrathecal dexmedetomidine (group D) resulted in significantly lower post-operative pain scores compared to intrathecal fentanyl (group F) (p=0.000). Across various surgical types, including Orthopedic, General, Urology, and Obs/Gyne procedures, group D consistently displayed reduced pain scores (p&lt;0.001). The number of patients who needed post-operative analgesia was significantly higher in group (F) than in group (D) (40 vs 23, p=0.002). Conclusion: Compared to fentanyl, intrathecal dexmedetomidine as an adjuvant to local anesthesia was found to lower post-operative pain scores and decrease the need for post-operative analgesia.

In this project, four of fibers Bragg gratings were fabricated by injecting different volumes of liquids (star line Glass Mechanix optical adhesive material, olive oil diluted with ethanol) into the hollow core fiber. The amplitude splitting interferometric technique with a high resolution specially designed translation stage was used for the fabrication process. The fabrication was done using ultraviolet laser operated at wavelength 405nm. The fabricated Bragg length of the four fibers is equal to 3.8 cm. The results presented fiber Bragg grating (FBG) with successful fabrication at 653.3 nm Bragg reflected wavelength.

This study investigates the impact of Government Consumption (GC) on Saudi Arabia’s GDP during major economic crises from 1969 to 2022, with a focus on periods marked by fluctuations in oil and non-oil revenues. By integrating these revenue streams, the research provides a more comprehensive analysis of fiscal policy effectiveness during economic downturns. Using an Autoregressive Distributed Lag (ARDL) model, the study reveals the complex role of Government Consumption (GC) in stabilizing and stimulating the Saudi economy amidst revenue volatility.Key findings indicate that while GC does not significantly influence GDP in the short term, its long-term effectiveness varies across different crises. Specifically, GC has acted as a buffer against immediate economic shocks during certain crises while providing a stimulus for economic recovery in others. For instance, during the 2020 COVID-19 pandemic, timely fiscal measures significantly boosted GDP, underscoring the importance of adaptive and proactive fiscal policies. Conversely, the 2014-2016 oil price collapse demonstrated that GC alone was insufficient to counteract economic downturns, emphasizing the need for diversified revenue strategies.These findings underscore the dual role of GC in economic stabilization and recovery. During the COVID-19 pandemic, GC played a crucial role in both mitigating negative economic impacts and supporting recovery efforts, showcasing its effectiveness in times of global disruptions. This demonstrates GC's capability as an immediate buffer against economic shocks and a stimulus for economic recovery. In contrast, during the 2014-2016 oil price collapse, GC was less effective, indicating the limitations of relying solely on government spending without broader economic diversification. This highlights the necessity of diversified revenue strategies to complement fiscal measures for long-term economic resilience.The robustness of the findings was ensured through various diagnostic tests, including checks for autocorrelation, heteroskedasticity, and stationarity of residuals. The absence of significant autocorrelation and heteroskedasticity, along with the stationarity of differenced variables, confirms the validity of the econometric models used.The study contributes to the discourse on fiscal policy in oil-dependent economies by illustrating the critical role of diversified revenue strategies and adaptive fiscal measures in enhancing economic resilience. Recommendations are offered for policymakers to optimize fiscal strategies, ensuring robust economic recovery and long-term stability in volatile markets. This research highlights the necessity for Saudi Arabia to refine its fiscal policies towards greater economic diversification and stability.

Text recognition is an important area of the pattern recognition field. Natural language processing (NLP) and pattern recognition have been utilized efficiently in script recognition. Much research has been done on handwritten script recognition. However, the research on the Arabic language for handwritten text recognition received little attention compared with other languages. Therefore, it is crucial to develop a new model that can recognize Arabic handwritten text. Most of the existing models used to acknowledge Arabic text are based on traditional machine learning techniques. Therefore, we implemented a new model using deep machine learning techniques by integrating two deep neural networks. The architecture of the Residual Network (ResNet) model is used to extract features from raw images. Then, the Bidirectional Long Short-Term Memory (BiLSTM) and connectionist temporal classification (CTC) are used for sequence modeling. Our system improved the recognition rate of Arabic handwritten text compared to other models of similar type with a character error rate of 13.2% and character error rate of 27.31%. In conclusion, the domain of Arabic handwritten recognition is advancing swiftly with the use of sophisticated deep learning methods.

The digital society is an outcome of the Internet which has nearly made everything connected and accessible no matter where or when. Nevertheless, despite the fact that conventional IP networks are complicated and very hard to manage, they are still widely adopted. The already established policies make the network configuration/reconfiguration a complex process that reacts to errors, load, and modifications. The prevailing networks are vertically integrated which makes things more and more complicated: Data planes and control are strapped together. Software-defined networking is a model that is meant to solve this issue by splitting the vertical integration and detaching the network’s control logic from the implicit routers and switches; this could be achieved by reinforcing centralization of network control and making the network programmable. In this work, we worked to implement MPLS networks with SDN, to enhance the traffic engineering over the network, and to minimize the network delay and latency, with minimum cost using three of the different SDN networks. The experiment results showed the advantage of the proposed approach for reducing the network delay, comparing with previous studies. Where the average of network delay in our approach reaches to 3.01 milliseconds.

Abstract: As a low-input crop, Miscanthus offers numerous advantages that, in addition to agricultural applications, permits its exploitation for energy, fuel, and material production. Depending on the Miscanthus genotype, season, and harvest time as well as plant component (leaf versus stem), correlations between structure and properties of the corresponding isolated lignins differ. Here, a comparative study is presented between lignins isolated from M. x giganteus, M. sinensis, M. robustus and M. nagara using a catalyst-free organosolv pulping process. The lignins from different plant constituents are also compared regarding their similarities and differences regarding monolignol ratio and important linkages. Results showed that the plant genotype has the weakest influence on monolignol content and interunit linkages. In contrast, structural differences are more significant among lignins of different harvest time and/or season. Analyses were performed using fast and simple methods such as nuclear magnetic resonance (NMR) spectroscopy. Data was assigned to four different linkages (A: b-O-4 linkage, B: phenylcoumaran, C: resinol, D: b-unsaturated ester). In conclusion, A content is particularly high in leaf-derived lignins at just under 70 % and significantly lower in stem and mixture lignins at around 60 % and almost 65 %. The second most common linkage pattern is D in all isolated lignins, the proportion of which is also strongly dependent on the crop portion. Both stem and mixture lignins, have a relatively high share of approximately 20 % or more (maximum is M. sinensis Sin2 with over 30 %). In the leaf-derived lignins, the proportions are significantly lower on average. Stem samples should be chosen if the highest possible lignin content is desired, specifically from the M. x giganteus genotype, which revealed lignin contents up to 27 %. Due to the better frost resistance and higher stem stability, M. nagara offers some advantages compared to M. x giganteus. Miscanthus crops are shown to be very attractive lignocellulose feedstock (LCF) for second generation biorefineries and lignin generation in Europe.

Introduction: Transportation logistics play a pivotal role in facilitating both individual mobility and supply chain operations on a global scale. However, conventional transportation systems have contributed significantly to urban congestion and environmental degradation. In response to these challenges, there is a growing momentum towards the adoption of intelligent transportation systems (ITS) and sustainable transportation solutions. This research aims to explore the potential of renewable energy sources to power electric vehicles (EVs) and flying automobiles, thereby accelerating the transition towards a low-carbon future. Objectives: The primary objectives of this research are as follows: - Investigate the role of renewable fuels in powering both EVs and flying cars to reduce reliance on fossil fuels and mitigate carbon emissions. - Analyze the dynamic growth and sustainability implications of advancements in battery technology and alternative renewable energy sources, such as Hydrogen Fuel Cells. - Evaluate the challenges and opportunities associated with the integration of flying vehicles into existing transportation infrastructure, focusing on safety, airspace control, and infrastructure development. - Review insights and guidance to stakeholders on promoting sustainable transportation solutions for EVs and flying cars through the utilization of renewable energy sources and the reduction of carbon emissions from the literature. Methodology: This research employs a mixed-method approach, combining literature review, and causal loop diagram analysis. The literature review provides a comprehensive understanding of current trends, challenges, and opportunities in sustainable transportation and renewable energy technologies. A causal loop diagram is utilized to visualize the dynamic interactions between various factors influencing the adoption of EVs and flying cars, including technological advancements, policy interventions, and market dynamics. Results and Discussion: The findings of this research highlight the significant potential of renewable energy sources, such as solar, wind, and hydrogen, in powering both EVs and flying cars. Advances in battery technology and hydrogen fuel cells are identified as key drivers in accelerating the transition towards sustainable transportation systems. However, challenges remain in terms of infrastructure development, safety regulations, and airspace management for flying vehicles. Nevertheless, there is a noticeable advancement in reducing carbon emissions and reliance on fossil fuels with the widespread adoption of EVs. By harnessing renewable energy and implementing effective policy measures, stakeholders might able to promote the widespread adoption of sustainable transportation solutions, thereby contributing to environmental protection and societal well-being. Conclusion: Literally, this research underscores the importance of sustainable transportation solutions in addressing urban congestion, environmental pollution, and energy security concerns. By leveraging renewable energy sources and embracing technological advancements, such as EVs and flying cars, stakeholders pave the way for a more sustainable and resilient transportation system. However, concerted efforts are needed to overcome existing challenges and ensure the successful integration of these technologies into existing infrastructure. Through collaborative partnerships and innovative initiatives, a low-carbon future for transportation logistics can be achieved, benefiting both the environment and society as a whole.

In this study, the effects of grain size and gradation of riprap, overtopping flow depth and downstream slope of embankment on scouring and deposition characteristics at the downstream toe of the embankment was investigated. For the experiment, three different downstream slopes (1:2, 1:3, and 1:4), three different overflow depths (1, 2, and 3 cm), and three different sizes (d₅₀ of 16.41 mm, 8.48 mm, and 3.39 mm herein referred as No.5, 6 and 7 respectively) of riprap particles, respectively, were used in the laboratory. The experimental results demonstrated that the scour depth and deposition height increased with increasing energy head for each downstream slope condition. Among the three particle sizes, for No. 5 size particle shows the lowest scour depth and highest deposition height. For the 1:2 slope, the No. 5 particle size could resist scour 62% and 75% less than that of the No. 6 and No. 7 particles, respectively. For the 1:3 slope case, this was 31% and 46%, and for the 1:4 slope case, this was 39% and 49% less than the No. 6 and No. 7 size particles, respectively.

Malaysia is a developing country and agro-industries contribute country’s economy. However, it is largely unknown the scenarios of agricultural practice and food supply over the years. To understand the fact, this study was designed to explore the agricultural land use changes and domestic food supply for last 50 years in Malaysia. The result showed that oil palm plantation area and yield, both are increased by folds, conforming “oil palm” mono-culture practice. Rice cultivation area remained almost unchanged but the yield increased. However, both area of plantation and yield in case of rubber, coca and coconut were decreased. When, it comes to domestic food supply, in 1973 food grain (Rice, Wheat, Maize) import was lower than domestic production. However, the import increased more than 3 times than the domestic production in 2013. Domestic production of vegetables and vegetables import was almost 50:50. Fruits import increased almost 3 times of domestic production, though domestic production was increased. In conclusion, it is understood that Malaysian agriculture economy is standing on “oil palm” wearers domestic food supply is import dependent. It is high time to reshuffle the policy for sustainable development and achieving food sovereignty.

Survivability is a critical concern in WSNs, heavily influenced by energy efficiency. Addressing severe energy constraints in WSNs requires solutions that meet application goals while prolonging network life. This paper presents an energy optimization approach (EOAMRCL) for WSNs, integrating the Grey Wolf Optimization (GWO) for enhanced performance. EOAMRCL aims to enhance energy efficiency by selecting the optimal duty-cycle schedule, transmission power, and routing paths. The proposed approach employs a centralized strategy using a hierarchical network architecture. During the cluster formation phase, an objective function, augmented with GWO, determines the ideal cluster heads (CHs). The routing protocol then selects routes with minimal energy consumption for data transmission to CHs, using transmission power as a metric. In the transmission phase, the MAC layer forms a duty-cycle schedule based on cross-layer routing information, enabling nodes to switch between active and sleep modes according to their network allocation vectors (NAV). This process is further optimized by an enhanced CSMA/CA mechanism, which incorporates sleep/activate modes and pairing nodes to alternate between active and sleep states. This integration reduces collisions, improves channel assessment accuracy, and lowers energy consumption, thereby enhancing overall network performance. EOAMRCL was evaluated in a MATLAB environment, demonstrating superior performance compared to EEUC, DWEHC, and CGA-GWO protocols, particularly in terms of network lifetime and energy consumption. This highlights the effectiveness of integrating GWO and the updated CSMA/CA mechanism in achieving optimal energy efficiency and network performance.

In the present study. At first, some properties of r-fuzzy soft β-closed sets are introduced on fuzzy soft topological spaces based on the paper Aygunoglu et al. (Hacet. J. Math. Stat. 2014, 43, 193-208). Also, we define the closure and interior operators with respect to the classes of r-fuzzy soft β-closed and r-fuzzy soft β-open sets, and investigate some of their properties. In addition, the concept of r-fuzzy soft β-connected sets is introduced and characterized with help of fuzzy soft β-closure operators. Thereafter, some properties of a fuzzy soft β-continuity are studied. Furthermore, we introduce and study the concepts of fuzzy soft almost (weakly) β-continuous functions, which are weaker forms of a fuzzy soft β-continuity. Also, the relationships between these classes of functions are specified with the help of some illustrative examples. Finally, we explore new types of fuzzy soft functions called, fuzzy soft β-irresolute (strongly β-irresolute, β-irresolute open, β-irresolute closed and β-irresolute homeomorphism) functions, and discuss some properties of them. Also, we show that fuzzy soft strongly β-irresolute → fuzzy soft β-irresolute → fuzzy soft β-continuity, but the converse may not be true.

Inorganic nanoparticles based on magnetite improve the mechanical, thermal, and magnetic properties of microporous cryogel polymer composites. Here we report the synthesis of microporous cryogel based on the crosslinked sodium vinyl sulfonate (Na-VS) and 2-acrylamido-2-methylpropane sulfonic acid sodium salt (Na-AMPS). The magnetite nanoparticles were inserted into Na-VS/Na-AMPS cryogel either during its crosslinking polymerization or by in-situ technique after its crosslinking. The morphology, particle sizes, thermal stability and magnetite contents of Na-VS/Na-AMPS cryogel and its magnetite composites were investigated. The prepared Na-VS/Na-AMPS cryogel and its magnetite composites were used as adsorbents for methylene blue (MB) cationic dye using optimum conditions. The magnetite Na-VS/Na-AMPS cryogel composite prepared by in-situ technique achieved the best adsorption MB removal capacity for 7 cycles among the other adsorbents via chemical adsorption mechanism at room temperature.

The field of construction materials is pivotal in developing sustainable and resilient infrastructure. This demands continuous research to understand the properties and behaviors of these materials under diverse conditions. Although advancements in material science and numerical modeling have been significant, experimental testing remains indispensable for a thorough comprehension of material characteristics, particularly under extreme stresses and environmental factors. This need has forced the development of a wide array of testing techniques, each designed to evaluate specific engineering properties, thus creating a complex and varied landscape of experimental methodologies. This study provides a comprehensive overview of both conventional and innovative experimental testing techniques used to characterize construction materials. It explores the related methodologies and identifies potential gaps in their application within the industry. The spectrum of testing covered includes mechanical, chemical, thermal, microstructural, durability, physical, rheological properties, and non-destructive testing methods. Mechanical tests assess strength, hardness, and fatigue, whereas chemical analyses utilize techniques such as spectroscopy and chromatography. Thermal properties are examined using thermogravimetric analysis, and microstructural characteristics are explored through advanced imaging techniques. Durability testing focuses on materials’ resistance to environmental challenges, while physical properties tests evaluate aspects like porosity and water absorption. Rheological and non-destructive tests further examine materials’ behavior and integrity without causing damage. By discussing these methodologies, the study sheds light on various approaches to material evaluation and aims to enhance the selection, application, and development of testing standards. This overview seeks to inform and inspire future research and innovation in the science of construction materials, contributing to the development of more resilient and sustainable construction practices.

Cervical injuries from athletic activities are rare; they can have severe consequences if not diagnosed and managed promptly. The choice of diagnostic imaging modality is pivotal in ensuring timely and accurate diagnosis. We detail the case of a 19-year-old female athlete who sustained a C2 Durel Type II Subclass C fracture during a short-track speed skating championship. Initial evaluation using X-ray imaging at the athletic center medical facility did not detect the injury, allowing her to continue competing. Persistent pain led to further evaluation at our institution, where MRI and CT scans confirmed the fracture. Approximately 45 days post-injury, the patient underwent a successful surgical intervention utilizing O-arm CBCT navigation for C1-C2 dorsal fusion. Post-surgery, she embarked on a comprehensive rehabilitation program and fully recovered within 12 weeks. This case underscores the limitations of relying solely on X-ray imaging for diagnosing cervical fractures post-trauma. Our findings advocate prioritizing CT scans as a primary diagnostic tool in such scenarios, emphasizing the need for a robust diagnostic approach to ensure athlete safety and well.

Background: Pneumococcal carriage surveillance study took place in urban and rural areas for Jordanian children in the period 2015-2019. Objectives: Determine urban and rural differences in pneumococcal carriage rate, resistance, and serotypes from healthy Jordanian children of Amman (urban) and eastern Madaba (rural). Methods: Nasopharyngeal swabs (NP) were taken from 682 children aged 1 to 163 months. Pneumococcal identification, serotyping and resistance were done according to standard method. Results: Number of cases tested for Amman 267 and for eastern Madaba 415. Carriage rate for eastern Madaba was 39.5% and for Amman 31.1%. Predominant serotypes for eastern Madaba and Amman were 19F (21.3%; 15.7%), 23F (12.2%; 9.6%), 14 (6.7%; 2.4%), 19A (4.9%; 2.4%), 6A (5.5%; 3.6%). Resistance rates for eastern Madaba and Amman were: penicillin (95.8%; 81.9%), clarithromycin (68.9%; 59.0%), clindamycin (40.8%; 31.3%), and trimethoprim-sulfamethoxazole (73.2%; 61.4%). Coverage of PCV7, PCV13, and the future PCV20 for Amman were 42.2%, 48.2%, and 60.2%; and for eastern Madaba were 50.0%, 62.2%, and 73.2%, respectively. In Amman 25.8% have received 1-3 PCV7 injections compared to 1.9% in eastern Madaba. Conclusions: There was significant differences in carriage, resistance and coverage in both regions. The potential inclusion of PCV vaccination program for rural areas is essential.

Despite the effectiveness of insulin injections in managing hyperglycemia in Type 1 Diabetes, they fall short in addressing autoimmunity and regenerating damaged islets. This review aims to explore the potential of various treatment modalities for T1DM, including mesenchymal stem cells (MSCs), MSC-derived exosomes, gene therapy, islet allotransplantation, and pancreatic islet cell transplantation. Results: MSCs demonstrate efficacy in T1DM treatment through immunomodulation and tissue regeneration, although further research is warranted to optimize their therapeutic potential. Gene therapy presents a promising approach despite challenges such as donor shortage and immune rejection. Pancreatic islet cell transplantation emerges as a viable option, albeit with associated risks including graft rejection and the need for immunosuppression. Teplizumab, an FDA-approved humanized monoclonal antibody, revolutionizes the treatment landscape of Type 1 Diabetes by significantly delaying its onset, offering a paradigm shift since the discovery of insulin Conclusion: Ongoing studies and technological advancements in T1DM management offer a promising outlook for improved treatments and possibly even eradication on a global scale. MSCs, MSC-derived exosomes, gene therapy, and pancreatic islet transplantation hold considerable potential.

Type 2 diabetes mellitus (T2DM) is an endocrine illness associate with various changes in the immune system and adaptor protein levels. Cytokine dependent hematopoietic cell linker (CLNK) is an adapter protein that regulates immune receptor signaling and acts as a regulator of the receptor signaling of T-cells and natural killer T-cell. The role of CLNK in T2DM is not studied previously. In the present study, serum CLNK level was measured and correlated with some sociodemographic and insulin resistance (IR) parameters. This is achieved by performing measurement of CLNK and insulin parameters (glucose, insulin, and HbA1c in addition to the calculation of the functions of IR (HOMA2IR), insulin sensitivity (HOMA%S), and beta-cell function (HOMA%B)) in 60 T2DM patients and 30 controls. The results indicated a significant increase (p=0.025) in serum CLNK in patients group in comparison with the controls. Multivariate generalized linear model (GLM) analysis revealed no significant effect of age, BMI, and sex on the CLNK level. The results of tests for between-subjects showed that the CLNK affects diagnosis significantly (F=7.445, p=0.008, partial η² =0.081) and its effect is approximately the same as the effect of insulin (F=8.107, p=0.006, partial η² =0.087). The correlation study showed a highly significant positive correlation between CLNK and the duration of disease (rho=0.420, p<0.001). It can be concluded that the increase CLNK in T2DM revealing the role of the adaptor proteins level in the nature of disease. Elevation of CLNK level may be used as a predictor for diabetes complications, which needs more investigations.

The design of torsional springs for Series Elastic Actuators (SEAs) is challenging, especially when it comes to balancing good stiffness characteristics and efficient torque robustness. This study focuses on the design of a lightweight, low-cost, and compact torsional spring for use in rotary series elastic actuator (ES-RSEA) of lumbar support exoskeleton. The exoskeleton is used as an assistive device to prevent lower back injuries. The torsion spring was designed following design for manufacturability (DFM) principles, focusing on minimal space and weight. The design process consisted of determining the potential topology and optimizing the selected topology parameters through finite element method (FEM) to reduce equivalent stress. The prototype was made using a waterjet cutting process with low-cost material (AISI-4140-alloy) and tested using a custom-made test rig. The results showed that the torsion spring had a linear torque-displacement relationship with 99% linearity, and the deviation between FEM simulation and experimental measurements was less than 2%. The torsion spring has a maximum torque capacity of 45.7 Nm and a stiffness of 440 Nm/rad. The proposed torsion spring is a promising option for lumbar support exoskeletons and similar applications requiring high stiffness, low weight-to-torque ratio, and cost-effectiveness.

Water scarcity challenges have necessitated the adoption of water-saving techniques in protected and nom-protected farming. This study aimed to assess the performance of a water-saving soil-less cultivation technique and to compare it with conventional soil-based cultivation in protected farming. The soilless technique used local gravel and a mixture of peat-moss, humin-substrate, and perlite in ratios of 4:3:1.5. Three irrigation regimes were imposed using emitters 8Lh-1 design discharge (D1) emitters with 6Lh-1 design discharge (D0.75) and 4Lh-1 de-sign discharge (D0.5) for the two cultivation methods during the growth cycle of tomato by drip irrigation. The vegetative growth, fruit yield and water consumption were measured and water productivity was determined. Moreover, an economic assessment was carried out by estimating and comparing economic coefficients for the two cultivation methods. Estimated coefficients include revenues, net profit, benefit-cost ratio, break-even levels of production and prices, revenues over variable cost, and revenues on investment. The tomato fruit yield under soil-based cultivation overtopped the yield under soilless cultivation. The water productivity under the soilless cultivation was almost twice that (24.3 kg m-3) of the soil-based cultivation (15.5 kg m-3). The soilless cultivation saved 50% of irrigation water applied by the conventional soil-based method, saving energy and soil from deterioration. Revenues and net profits stimulated by higher yield coupled with lower variable cos supported the soil-based cultivation. The economic assessment showed that both cultivation methods were economically viable. However, the soil-based cultivation method was more profitable due to its higher fruit yield. Overall, the results of this study suggest that the soilless cultivation technique is a viable option for wa-ter-saving cultivation. However, the soil-based cultivation method is still more profitable due to its higher fruit yield

Desalination accounts for 1% of the total global water consumption and is an energy-intensive process, with the majority of operational expenses attributed to energy consumption. Moreover, at present, a significant portion of the power comes from traditional fossil fuel-fired power plants and the greenhouse gas emissions associated with power production along with concentrated brine discharge from the process, pose a severe threat to the environment. Due to the dramatic impact of climate change, there is a major opportunity to develop sustainable desalination processes to combat the issues of brine discharge, greenhouse gas emissions along with a reduction in energy consumption per unit of freshwater produced. Nanotechnology can play a vital role to achieve specific energy consumption reduction as nanofluids application increases the overall heat transfer coefficient enabling the production of more water for the same size desalination plant. Furthermore, concentrated brine discharge harms the marine ecosystems, and hence, this problem must also be solved to support the objective of sustainable desalination. Several studies have been carried out in the past several years in the field of nanotechnology applications for desalination, brine treatment and the role of renewable energy in desalination. This paper aims to review the major advances in this field of nanotechnology for desalination. Furthermore, a hypothesis for developing an integrated solar thermal and nanofluid sustainable desalination system, based on the cyclic economy model is proposed.

Innovation is rapidly growing and affecting various industries, including hydrocarbon processing. This study aims to conduct a comprehensive and organized review of the literature on innovation ecosystems and their performance. It will examine existing definitions of innovation ecosystems and related concepts and identify metrics and indicators for measuring innovation and entrepreneurial ecosystems. The term "innovation ecosystem" has gained considerable attention from scholars and practitioners over the past fifteen years. Despite the proliferation of research in this area, there are concerns about its fragmented knowledge base. While previous reviews have highlighted the theoretical connections between innovation ecosystems and related concepts, there is still a need for a more comprehensive understanding of the current state of innovation ecosystem research. The study used a systematic literature review approach that combines bibliographic coupling and content analysis methods, drawing on over 100 studies to identify five streams of current innovation ecosystem research: technology innovation, platform innovation ecosystems, regional development, innovation ecosystem conceptualization and theorization, and entrepreneurship and innovation. The study's contribution lies in decoding the intellectual structure of current innovation ecosystem research and providing targeted recommendations for future research.

Eurycomanone and eurycomalactone are known quassinoids present in the roots and stems of Eurycoma longifolia. These compounds had been reported to have cytotoxic effects, however, their mechanism of action in a few cancer cell lines have yet to be elucidated. This study was aimed to investigate the anti-cancer effects and mechanisms of action of eurycomanone and eurycomalactone in cervical (HeLa), colorectal (HT29) and ovarian (A2780) cancer cell lines via Sulforhodamine B assay. Their mechanism of cell death was evaluated based on Hoechst 33342 assay and in silico molecular docking toward DHFR and TNF-α as putative protein targets. Eurycomanone and eurycomalactone exhibited in vitro anti-cancer effects manifesting IC50 values of 4.58 ± 0.090 µM and 1.60 ± 0.12 µM (HeLa), 1.22 ± 0.11 µM and 2.21 ± 0.049 µM (HT-29), and 1.37 ± 0.13 µM and 2.46 ± 0.081 µM (A2780) respectively. They induced apoptotic cancer cell death in dose- and time-dependent manners. Both eurycomanone and eurycomalactone were also predicted to have good inhibitory potential as demonstrated by the docking into TNF-α with binding affinity of -8.83 and -7.51 kcal/mol, respectively, as well as into DHFR with binding affinity results of -8.05 and -8.87 kcal/mol, respectively. These results support the evidence of eurycomanone and eurycomalactone as anti-cancer agents via apoptotic cell death mechanism that could be associated with TNF-α and DHFR inhibition as among possible protein targets.

This paper introduces the complex Rayleigh-van der Pol-Duffing oscillators (RVDOs), which are hyperchaotic and can be either autonomous or non-autonomous. The fundamental dynamics of the autonomous and nonautonomous complex RVDOs including dissipation, symmetry, fixed points and their stability are studied. These oscillators are found in various important fields of physics and engineering. The paper proposes a scheme to achieve phase synchronization (PS) and antiphase synchronization (APS) for different dimensional models. These kinds of synchronization are considered as generalization of several other types of synchronization. For this scheme we use the active control method based on Lyapunov stability theory. By analytically determining the control functions, the scheme achieved PS and APS. Our scheme is applied to study PS of hyperchaotic behaviours for two distinct hyperchaotic non-autonomous and autonomous complex RVDOs. Additionally, the scheme is employed to achieve APS of chaotic real non-autonomous RVDO and hyperchaotic complex autonomous RVDO, including those with different dimensions. Our work presents numerical results that plot the amplitudes and phases of these hyperchaotic behaviours, demonstrating the successful achievement of PS and APS.

The preparation of transition metal salt ammine complexes having oxidizing anions is a great challenge due to the reaction between the ammonia and oxidizing anions during the synthesis of these materials. However, they have an important role in the development of new oxidants in organic chemistry and especially as precursors in the preparation of mixed metal oxides and alloys in controlled temperature thermal decomposition reactions. Therefore, the synthetic procedures to prepare the complexes of transition metal permanganate, pertechnetate, and perrhenate (VIIB group tetraoxometallates) salts with ammonia as ligand or co-ligand have been comprehensively reviewed. The available data about the structure and spectroscopic properties of these compounds, including the hydrogen bonds that act as redox reaction centers under their thermal decomposition are given and evaluated. Their thermal decomposition processes and products have been summarized. The available pieces of information about their role in organic oxidation reactions like the oxidation of benzyl alcohols, and regeneration of oxo-compounds from oximes and phenylhydrazones including the kinetics of these processes have also been collected.

Background: The biofilm-forming bacteria Porphyromonas gingivalis (P. gingivalis) is primarily responsible for periodontal disorders, which continue to be a global health issue. Despite the widespread use of antibiotics like metronidazole, other potent therapeutic a crucial quorum sensing molecule implicated in the formation of P. gingivalis biofilm. Approaches are now being explored due to the growing challenge of antibiotic resistance. Objective: In particular, chemicals from Symphytum Officinale (S) and Panax Ginseng (G) plants will be examined in this study to assess if they have the ability to inhibit biofilm and to prevent the development of acylated homoserine lactones (AHLs), a quorum sensing molecule. Materials and Methods: With Metronidazole serving as a control, the antibacterial effects of these substances (Symphytum Officinale and Panax Ginseng) were examined against a standard strain and a clinical isolate of P. gingivalis. Dilutions of these plant extracts were used either alone (G+S) or in conjunction with metronidazole (G+S+F), to assess their antibacterial activity using antibacterial susceptibility test (inhibition zone), biofilm inhibition and disruption assay (optical density) and quorum sensing inhibition assay (AHL). Results: The combinations of Symphytum officinale, Panax Ginseng and metronidazole (S+G+F) showed the maximum effectiveness with highest zone of inhibition (25.000±0.001 mm) and biofilm inhibition (98.46%), and were comparable to G+S (inhibition zone of 24.341±0.593 mm and biofilm inhibition of 97.76%), and significantly different in the degree of biofilm inhibition with different treatment scenarios. Additionally, the plant's extracts and combinations are specific concentrations had a significant effect on the suppression of the generation of AHL (p &lt; 0.05). Conclusion: According to preliminary research, these plant-derived substances, especially when paired with metronidazole, significantly inhibited the growth of P. gingivalis biofilm providing valuable information for the development of innovative therapeutic approaches for periodontitis and other biofilm-associated illnesses.

Batch and transport experiments were used to investigate the remediation of a loamy sand soil contaminated with Cr(VI) using zero valent iron nanoparticles (nZVI) stabilized by the carboxy methyl cellulose (CMC-nZVI). The effect of pH, ionic strength (IS), and flow rate on the removal efficiency of Cr(VI) were investigated under equilibrium (uniform transport) and non-equilibrium (Two-site sorption) transport using the Hydrus-1D model. The overall removal efficiency ranged from 70 to over 90% based on the chemical characteristics of the CMC-nZVI suspension and the transport conditions. The concentration and pH of the CMC-nZVI suspension had the most significant effect on the removal efficiency and transport of Cr(VI) in the soil. The average removal efficiency of Cr(VI) was increased from 24.1 to 75.5% when the concentration of CMC-nZVI nanoparticles was increased from 10 to 250 mg L-1, mainly because of the increased total surface area at larger particle concentration. Batch experiments showed that removal efficiency of Cr(VI) was much larger under acidic conditions. The average removal efficiency of Cr(VI) reached 90.1 and 60.5 % at pH 5 and 7, respectively. The Two-site sorption model described quite well (r2 = 0.96-0.98) the transport of Cr(VI) in soil as compared to the uniform transport model (r2 = 0.81-0.98). The average retardation of Cr(VI) was 3.51 and 1.61 at pH 5 and 7, respectively, indicating earlier arrival for the breakthrough curves and shorter time to reach maximum relative concentration at lower pH. The Hydrus-1D model has proven to be an efficient tool for assessing the removal of Cr(VI) pollutants, offering innovative, cost-effective, and environmentally friendly remediation methodologies.

Background and Objectives: In recent years, electric scooters have gained widespread popularity as an easy and affordable mode of transport in urban areas worldwide. Simultaneously, trauma centres have observed an increasing number of associated injuries to users. While injury patterns associated with other vehicles are now well-researched, electric scooter-related injuries are a new topic in the literature. Our study aims to investigate the disparities in injury patterns and other critical accident characteristics among bicycle, electric scooter, and scooter riders. Materials and Methods: In this one-year prospective observational study, we examined patients who sustained injuries while riding bicycles, electric scooters, or scooters between April 2021 and March 2022 at Hungary's largest trauma centre in Budapest. During this one-year period, we identified 1938 patients, 1378 cyclists, 370 electric scooters and 190 scooter users. We collected basic demographic information, recorded injury type and severity, time of day the injury occurred, and alcohol intoxication. Results: While 4.6% of cyclists and 5.8% of scooter riders had consumed alcohol, 26.8% of electric scooter riders were intoxicated at the time of their accident. 45.8% of electric scooter-related injuries occurred at night, compared to only 9.2% and 14.1% of bike and scooter-related injuries, respectively. Sober patients were more likely to suffer mild and severe limb injuries (Odds Ratio (OR): 3.85, P = .0001 and OR: 3.26, P = .0001), but less likely to experience mild and severe head injuries (OR: 0.1, P = .0001 and OR: 0.25, P = .0001) than intoxicated patients. Cyclists had significantly fewer cases of severe head trauma than those injured while using electric scooters (OR: 0.34, P = .0166). Conclusions: Severe craniofacial injuries are more common in intoxicated patients and in patients injured using electric scooters.

The literature study delves into novel therapeutic strategies in transplantation medicine, highlighting unique approaches that could revolutionize current practices. It emphasizes novel patterns that have the potential to transform the current landscape. Commencing with a thorough examination of the historical environment, it traces crucial advances and changes in transplantation. The focus is on traditional techniques, emphasizing their limitations and challenges. An extensive examination of contemporary transplantation therapies offers valuable insights into the most recent progress in organ, cellular, and tissue transplantation. This analysis examines the immunological obstacles and outlines the current advancements and constraints. The exploration further navigates into novel models and concepts such as immunomodulation, developments in organ preservation techniques, gene editing, biomaterials, scaffold-based solutions, and the integration of precision medicine, artificial intelligence, and machine learning applications. Each section analyzes the potential for change and current progress in various areas, backed by relevant scientific sources up to 2023. The subsequent sections delve into innovative cellular therapies, biotechnological progress, current clinical trials, and case studies demonstrating effective applications. This examination delves into the ethical and regulatory considerations of innovative therapeutic procedures, emphasizing ethical implications, regulatory frameworks, and the importance of balancing innovation with patient welfare. The literature review concludes by offering a forward-looking perspective, emphasizing potential progress, anticipated challenges, and advocating for collaboration and interdisciplinary approaches to overcome limitations in the field of transplantation medicine.

Adipocytes play a critical role in maintaining a healthy systemic metabolism by storing and releasing energy in the form of fat and helping to regulate glucose and lipid levels in the body. Adipogenesis is the process through which pre-adipocytes are differentiated into mature adipocytes. It is a complex process involving various transcription factors and signaling pathways. Dysregulation of adipogenesis has been implicated in the development of obesity and metabolic disorders. Therefore, understanding the mechanisms that regulate adipogenesis and the factors that contribute to its dysregulation may provide insights into the prevention and treatment of these conditions. RNA Binding Motif Single Stranded Interacting Protein 1 (RBMS1) is a protein that binds to RNA and plays a critical role in various cellular processes such as alternative splicing, mRNA stability, and translation. The RBMS1 polymorphism has been shown to be associated with obesity and Type 2 diabetes, but the role of RBMS1 in adipose metabolism and adipogenesis is not known. We show that RBMS1 is highly expressed during the early phase of differentiation of the murine adipocyte cell line 3T3-L1 and is significantly upregulated in adipose tissue depots and adipocytes of high-fat-fed mice, implying a possible role in adipogenesis and adipose metabolism. Knockdown of RBMS1 in pre-adipocytes impacted the differentiation process and reduced the expression of some of the key adipogenic markers. Transcriptomic and proteomic analysis indicated that RBMS1 depletion affected the expression of several genes involved in major metabolic processes, including carbohydrate and lipid metabolism. Our findings imply that RBMS1 plays an important role in adipocyte metabolism and may offer novel therapeutic opportunity for metabolic disorders such as obesity and type 2 diabetes.

Polarimetric Synthetic Aperture Radar (PolSAR) images encompass valuable information that can facilitate extensive land cover interpretation and generate diverse output products. Extracting meaningful features from PolSAR data poses challenges distinct from those encountered in optical imagery. Deep Learning (DL) methods offer effective solutions for overcoming these challenges in PolSAR feature extraction. Convolutional Neural Networks (CNNs) play a crucial role in capturing PolSAR image characteristics by leveraging kernel capabilities to consider local information and the complex-valued nature of PolSAR data. In this study, a novel three-branch fusion of complex-valued CNN named Shallow to Deep Feature Fusion Network (SDF2Net) is proposed for PolSAR image classification. To validate the performance of the proposed method, classification results are compared against multiple state-of-the-art approaches using the Airborne Synthetic Aperture Radar (AIRSAR) datasets of Flevoland, San Francisco, and ESAR Oberpfaffenhofen dataset. The results indicate that the proposed approach demonstrates improvements in OA, with 1.3% and 0.8% enhancement for the AIRSAR datasets and 0.5% improvement for the ESAR dataset. The analyses conducted on the Flevoland data underscore the effectiveness of the SDF2Net model, revealing a promising OA of 96.01% even with only 1% sampling ratio.

As we know, the economy of science is to achieve optimal gains using scarce resources. Similarly, a problem where economies of the world are trying to resolve it is the issue of how to achieve an optimal economic contribution from limited tourism resources. According to the fact that global studies and statistics indicate that good governance is considered as the most important factor in developing countries and is considered as a strong governance of the development and as Information and Communication Technology (ICT) is effective in the interactions and economic and social exchanges of any society, it is the link between the tourism industry and the technology under the form of a robust tool and utilitarian in the tourism process called E-tourism can play a significant role. Therefore, the aim of this study was to investigate the effect of network Readiness Index and good governance on income from tourism industry. In this study, data and information about 14 selected countries were collected from Southwest Asia in the annual period of 2016-2011 in the form of panel data and the proposed model was used and estimated by the generalized torques system method. The estimated results of the model indicate that both hypotheses have a positive and significant impact on the amount of Network Readiness Index in the income of tourism industry, as well as the positive and significant effect of the index the amount of income from the tourism industry is confirmed, and their impact has been positive and significant, as well as exchange rate variables, revenue and commercial openness, also have a positive and significant effect on revenues of the tourism industry.

Insulin-like growth factor binding proteins (IGFBPs) are critical modulators of the metabolism. In adults, IGFBPs are associated with obesity and insulin resistance but the association of IGFBPs with metabolic homeostasis in children and adolescents is not fully characterized. In this study we investigated the association of plasma IGFBPs (IGFBP-1, 3 and 7) with weight status, central adiposity and cardiovascular disease markers Hs-CRP and Ox-LDL. A total of 420 adolescents (age 11-14 years) were randomly recruited from public middle schools in Kuwait. IGFBPs were measured using bead-based multiplexing while Hs-CRP and Ox-LDL were measured using ELISA. IGFBP-1 levels were significantly lower in obese and overweight participants compared to normal weight children. Only IGFBP-1 was negatively associated with waist circumference to height (WC/Ht) ratio. IGFBP-1 was negatively correlated with Hs-CRP while IGFBP-3 and IGFBP-7 were negatively correlated with Ox-LDL. These data demonstrate a robust negative association of IGFBP-1, but not IGFBP-3 or -7, with overweight and obesity, and the inflammation marker Hs-CRP. Central adiposity (WC/Ht ratio) was a stronger predictor of IGFBP-1 than BMI-for-age z-score. IGFBP-1 could thus be used as a sensitive predictive diagnostic tool for obesity and its subsequent effects in screening and monitoring of obesity-related metabolic complications in adolescents.

Fibromyalgia is a complex and often misunderstood chronic pain disorder. It is characterized by widespread musculoskeletal pain, fatigue, and heightened sensitivity, and has evolved in diag-nostic criteria and understanding over the years. Initially met with skepticism, fibromyalgia is now recognized as a global health concern affecting millions of people, with a prevalence trans-cending demographic boundaries. The clinical features and diagnosis of fibromyalgia encompass a range of symptoms beyond pain, including sleep disturbances and cognitive difficulties. The study emphasizes the importance of a comprehensive evaluation for accurate diagnosis, considering the shift from tender point reliance to a more holistic approach. Etiology and pathophysiology involve genetic predisposition, neurotransmitter dysregulation, central sensitization, and immune system involvement. Risk factors such as gender, age, family history, and comorbid conditions contribute to susceptibility. The impact on quality of life is profound, affecting physical and social aspects, often accompanied by mood disorders. Management approaches include pharmacological interventions, non-pharmacological therapies, lifestyle modifications, and alternative treatments. The study also delves into emerging research, exploring advances in neurobiological understanding, brain imaging, genetic markers, glutamate modulation, cannabinoids, gut microbiome, and digital health tools for fibromyalgia manage-ment. Overall, this study provides a nuanced and up-to-date overview of the complexities sur-rounding fibromyalgia, aiming to enhance understanding and support for individuals grappling with this challenging condition.

Background/Objectives: Meconopsis has long been used in traditional Tibetan medicine to treat various diseases. However, blue-flowered Meconopsis (M. betonicifolia) is becoming increasingly scarce due to overharvesting. As a potential alternative, yellow-flowered Meconopsis (M. integrifolia) shows promise but requires comprehensive characterization. This study aimed to evaluate and compare the anti-inflammatory potential of yellow- and blue-flowered Meconopsis species. Methods: LC-MS was used to analyze the chemical profiles of yellow- and blue-flowered Meconopsis. Putative targets of shared constituents were subjected to GO and disease enrichment analysis. The LPS-induced RAW264.7 macrophage model was employed to assess anti-inflammatory effects. Metabolomics was applied to gain mechanistic insights. Results: LC-MS revealed over 70% chemical similarity between species. Enrichment analysis associated targets with inflammation-related pathways. In macrophage assays, both species demonstrated dose-dependent anti-oxidative and anti-inflammatory activities, with yellow Meconopsis exhibiting superior efficacy. Metabolomics showed modulation of key inflammatory metabolic pathways. Conclusions: This integrative study validated yellow-flowered Meconopsis as a credible alternative to its blue-flowered counterpart for anti-inflammatory applications. Metabolic profiling provided initial clues regarding their multi-targeted modes of action, highlighting clinical relevance and potential for sustainable utilization and biodiversity conservation.

In this study, the olive pomace was considered because of its importance in the environment. So, this study carried out to estimate the total nitrogen content and the fatty acids profile of olive pomace. The olive pomace samples were collected from Irbid, Jarash, Ajloun and Mafraq during the harvesting season 2014 to study the biochemical characteristics of fatty acid composition and the total nitrogen (TN) content. The total nitrogen content was determined by standard Kjeldahl method and the fatty acid profile was detected by gas chromatography (GC). The results show that the total nitrogen content ranged from (0.39 ± 0.0) to (0.62 ± 0.02) with statistically significant difference suggesting that the composition of matrices and their percentage may be responsible for composition of amendments. The calculated total protein percentage ranged between (2.43 ± 0.00) to (3.87 ± 0.17). Also, 13 different fatty acids were quantitatively profiled and quantitated. Oleic acid (C 18:1) was found to be the highest percentage of all other fatty acids and ranged between (59.03%) and (63.81%), moreover the C 18:1/C 18:2 (oil quality) was calculated and C.V% showed variation meaning that nutritional implication could affect the oxidative stability of oils. In conclusion, OP by-product could give a sustainable and alternative-cheap source for fertilizers, pharmaceutical industries, cosmetics and other industries.