Coronavirus Disease 2019 (COVID-19), caused by a novel coronavirus named Severe Acute Respiratory Syndrome - Coronavirus-2 (SARS-CoV-2), emerged in early December 2019 in China and attained a pandemic situation worldwide by its rapid spread to nearly 167 countries with 287.239 confirmed cases and 11.921 human deaths with a case fatality rate (CFR) of around 4 per cent. Bats were considered as the reservoir host, and the search of a probable intermediate host is still going on. Animals have anticipated culprit of SARS-CoV-2 as of now. The disease is mainly manifested by pneumonia and related respiratory signs and symptoms, but the involvement of the gastrointestinal system and nervous system is also suggested. The severe form of the disease associated with death is mainly reported in older and immune-compromised patients with pre-existing disease history. Death in severe cases is attributed to respiratory failure associated with hyperinflammation. Cytokine storm syndrome associated with rampant inflammation in response to SARS-CoV-2 infection is considered as the leading killer of COVID-19 patients. COVID-19 patients were reported with higher levels of many pro-inflammatory cytokines and chemokines like IFN-g, IL-1b, IP-10, and MCP-1. Furthermore, severe cases of COVID-19 revealed higher levels of TNF-α, G-CSF, and MIP-1A. Blood profile of the COVID-19 patients exhibits lymphopenia, leucopenia, thrombocytopenia and RNAaemia along with increased levels of aspartate aminotransferase. SARS-CoV-2 infection in pregnant women does not lead to fetus mortalities unlike other zoonotic coronaviruses like SARS-CoV and MERS-CoV, with no evidence of intrauterine transmission to neonates. Rapid and confirmatory diagnostics have been developed, and high efforts are being made to develop effective vaccines and therapeutics. In the absence of any virus-specific therapeutic, internationally health care authorities are recommending adoption of effective prevention and control measures to counter and contain this pandemic virus. This paper is an overview of this virus and the disease with a particular focus on SARS-COV-2 / COVID-19 clinical pathology, pathogenesis and immunopathology along with a few recent research developments.

The risk of 'zoonotic spillovers,' or the transmission of viruses from animals to humans, has been raised by climate change and the devastation of nature, as infectious disease experts have long warned. Even as the world works to stop the spread of the currently unfolding pandemic of coronavirus disease 2019 (COVID-19) and the breakout of monkeypox virus (MPXV), a new animal virus, the Langya henipavirus (LayV), has been discovered in humans in Eastern China. The scientists say there is little danger of the virus spreading among humans, but it shares genetic material with Hendra virus and Nipah virus, two other henipaviruses that infect humans and cause life-threatening respiratory diseases. Humans infected with LayV can expect to experience high body temperature, cough, weariness, poor appetite, muscle discomfort, myalgia, nausea and vomiting. It is likely that the virus will spread from animals to humans. Currently, the health authorities of Taiwan and other health organizations are tracking the progress of the ailment to ensure it does not reach humans. Researchers have examined 25 species of small wild animals for presence of the virus, and so far, shrews are the only ones that have tested positive for the virus's RNA. Based on these results, shrews are a possible candidate for the virus's natural reservoir. Too far, no therapies or vaccines have been developed and licensed for henipaviruses like the LayV. When other therapies fail to alleviate viral infections, ribavirin may be the next best thing. The need for novel vaccinations against the LayV infection and the timely delivery of these vaccines to areas at high epidemiological risk is real. To lessen the likelihood of a health calamity being caused by this newly developing virus, it is crucial to conduct active surveillance in a transparent and globally collaborative manner. The questions that have not been answered yet require additional study.

A novel coronavirus (SARS-CoV-2), causing an emerging coronavirus disease (COVID-19), first detected in Wuhan City, Hubei Province, China has resulted in an outbreak in China which has taken a catastrophic turn with high toll rates in China and subsequently spreading across the globe. The rapid spread of this virus to more than 175 countries while affecting nearly 500,000 persons and causing more than 22,000 human deaths, it has resulted in a pandemic situation in the world. The SARS-CoV-2 virus belongs to the genus Betacoronavirus, like MERS-CoV and SARS-CoV, all of which originated in bats. It is highly contagious, causing symptoms like fever, dyspnea, asthenia and pneumonia, thrombocytopenia and the severely infected patients succumb to the disease. Coronaviruses (CoVs) among all known RNA viruses have the largest genomes ranging from 26 to 32 kb in length. Extensive research has been conducted to understand the molecular basis of the SARS-CoV-2 infection and evolution, develop effective therapeutics, antiviral drugs and vaccines, and to design rapid and confirmatory viral diagnostics as well as adopt appropriate prevention and control strategies. Till date, no clinically proclaimed, proven therapeutic antibodies or specific drugs and therapeutics, and vaccines have turned up. Several molecular diagnostic tests such as Real Time-PCR, isothermal loop-mediated amplification of coronavirus (i-LACO), full genome analysis by next-generation sequencing (NGS), multiplex nucleic acid amplification, and microarray-based assays are in use currently for the laboratory confirmation of this CoV infection. In this review article, we describe the basic molecular organization and phylogenetic analysis of the coronaviruses, including the SARS-CoV-2, and recent advances in diagnosis and vaccine development in brief and focusing mainly on developing potential therapeutic options that can be explored to manage this pandemic virus infection, which would help in valid countering of COVID-19.

Coronavirus Disease 2019 (COVID-19), caused by SARS-CoV-2 (Severe Acute Respiratory Syndrome - Coronavirus-2) of the family Coronaviridae, appeared in Wuhan, Hubei province, China being its epicenter in December 2019. This disease was declared as posing Public Health International Emergency by World Health Organization on January 30, 2020, attained the status of a very high-risk category on February 29, and now having a pandemic status (March 11, 2020). COVID-19 has presently spread to more than 195 countries/territories while killing nearly 19,600 humans out of cumulative confirmed cases accounting to more than 430,000 within a short period of just a few weeks. The majority of deaths have been reported in Italy and China. Researchers worldwide are pacing with high efforts to counter the spread of this virus and to design effective vaccines and therapeutics/drugs. Few of the studies have shown the potential of animal-human interface and zoonotic links in the origin of SARS-CoV-2. Exploring the possible zoonosis and revealing the factors responsible for its initial transmission from animals to humans will pave ways to design and implement effective preventive and control strategies to counter COVID-19. The present review presents an overview of COVID-19 and the causative virus SARS-CoV-2, with particular emphasis on the role of animals and their jumping the cross-species barriers, experiences learned from SARS- and MERS-CoVs, zoonotic links, and spillover events, transmission to humans and rapid spread., highlighting in very brief the preventive and control measures along with a few of the recent research developments to counter this pandemic virus/disease.

The technology-driven world of the 21^st century is currently confronted with a major threat to humankind in the form of the coronavirus disease (COVID-19) pandemic, caused by the severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). As of April 22, 2020, COVID-19 has claimed 169, 006 human lives and had spread to over 200 countries with more than 2,471,136 confirmed cases. The perpetually increasing figures associated with COVID-19 are disrupting the social and economic systems globally. The losses are unmatched and significantly higher compared to those from previously encountered pathogenic infections. Previously, two CoVs (SARS-CoV and Middle East respiratory syndrome-CoV) affected the human population in 2002 and 2012 in China and Saudi Arabia, respectively. Based on genomic similarities, animal-origin CoVs, primarily those infecting bats, civet cats, and pangolins, were presumed to be the source of emerging human CoVs, including the SARS-CoV-2. The cohesive approach amongst virologists, bioinformaticians, big data analysts, epidemiologists, and public health researchers across the globe has delivered high-end viral diagnostics. Similarly, vaccines and therapeutics against COVID-19 are currently in the pipeline for clinical trials. The rapidly evolving and popular technology of artificial intelligence played a major role in confirming and countering the COVID-19 pandemic using digital technologies and mathematical algorithms. In this review, we discuss the noteworthy advancements in the mitigation of the COVID-19 pandemic, focusing on the etiological viral agent, comparative genomic analysis, population susceptibility, disease epidemiology, animal reservoirs, laboratory animal models, disease transmission, diagnosis using artificial intelligence interventions, therapeutics and vaccines, and disease mitigation measures to combat disease dissemination.

In this work, an analog front-end (AFE) circuit for Electrocardiogram (ECG) detection system has been designed, implemented, and investigated in an industry-standard Cadence simulation framework using advanced technology node of 45 nm. The AFE consists of an instrumentation amplifier, a Butterworth band-pass filter (with fifth-order low-pass and second-order high-pass sections), and a second-order notch filter- all are based on two-stage, Miller-compensated operational transconductance amplifiers (OTA). The OTAs have been designed employing the $g_m/I_D$ methodology. Both the pre-layout and post-layout simulation were carried out. The layout consumes an area of 0.0058 mm$^2$ without the resistors and capacitors. Analysis of various simulation results were carried out for the proposed AFE. The circuit demonstrates a post-layout bandwidth of 239 Hz with a variable gain between 44 to 58 dB, a notch depth of -56.4 dB at 50.1 Hz, a total harmonic distortion (THD) of -59.65 dB (less than 1\%), an input referred noise spectral density of $

Single-molecule magnets (SMMs) have garnered significant interest in the field of molecular magnetism due to their unique magnetic properties at the nanoscale. These molecular systems exhibit magnetisation behaviour reminiscent of conventional bulk magnets but with distinct advantages such as size-dependent properties and potential applications in quantum computing and high-density data storage. However, challenges remain in harnessing their properties for practical applications, including their susceptibility to degradation and limited control over their assembly and organisation.

Inspired by nature's examples such as lotus leaves and insect wings, superhydrophobic surfaces have been extensively studied and engineered. However, achieving superoleophobic surfaces, which repel oils, has proven to be more challenging due to the oils' lower surface tension than water. This article presents a novel, cost-effective technique for fabricating superoleophobic surfaces with enhanced durability. We demonstrate the effectiveness of this technique by using Perfluorooctyltriethoxysilane (PFOTES) and silicon dioxide nanoparticles on stainless steel mesh substrate. The resulting surfaces exhibit remarkable superoleophobic properties by incorporating re-entrant structures, low surface energy, and high surface roughness, making them ideal for oil-repellency applications.

Mechanochemical production of copper (II) isonicotinate Metal-Organic Framework ([Cu (INA)2]-MOF) and its modified magnetic iron composite ([Cu (INA)2]-MOF@Fe3O4]) allowed for the adsorptive removal of Terbutaline from water. A variety of characterization techniques, including Fourier, transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM), were used to elucidate the distinct chemical and morphological features of the two advanced materials. The optimal adsorption conditions were determined by investigating a wide range of adsorption-related variables, including contact time, initial Terbutaline concentration, adsorbent dosages pH, and temperature. The chemistry involved in the adsorption process between the adsorbents and the adsorbate molecules was evaluated using the best-fitting models, such as kinetics, isotherms, and thermodynamics, and the regeneration study was performed to evaluate the adsorbents' reusability. Incredibly maximum adsorption capacities (Qmax) of 1667 and 2500 mg L-1 were attained within 40 minutes under alkaline pH 11 by the [Cu (INA)2]-MOF and the [Cu (INA)2]-MOF@Fe3O4, respectively. The adsorbents have been proven to be good for the adsorption of Terbutaline as a priority pollutant in an aqueous solution, with pseudo-first order and Langmuir as the best-fitting models for the kinetic and isotherm models respectively.

Ransomware is one of the most dangerous types of malware, which is frequently intended to spread through a network to damage the designated client by encrypting the client’s vulnerable data. Conventional signature-based ransomware detection technique falls behind because it can only detect known anomalies. When it comes to new and non-familiar ransomware traditional system unveils huge shortcomings. For detecting unknown patterns and sorts of new ransomware families,behavior-based anomaly detection approaches are likely to be the most efficient approach. In the wake of this alarming condition, this paper presents an ensemble classification model consisting of three widely used machine learning techniques that include Decision Tree (DT), RandomForest (RF), and K-nearest neighbor (KNN). To achieve the best outcome ensemble soft voting and hard voting techniques are used while classifying ransomware families based on attack attributes. Performance analysis is done by comparing our proposed ensemble models with standalone models on behavioral attributes based ransomware dataset..

The research aims to discover the natural occurrence of patulin (PAT) in selected citrus fruits from the central cities of Punjab and Pakistan's Northern cities. Total 2970 samples of twelve citrus fruits; kinnow, orange, grapefruits, bitter orange, mausami, red blood, pineapple, sweet orange, rough lime, sweet lime, kagzi lime and lemon were examined using liquid chromatography fitted with UV detector. The limit of detection (LOD) and quantification limit was 0.04 and 0.12 µg/kg, respectively. The results have shown that 56% of samples of citrus fruits from Punjab's central cities, Pakistan, were discovered to be infected from PAT. The elevated amounts of PAT ranging from 0.04 to 1150 µg/kg were found in citrus fruit samples from Multan cities. Furthermore, 31.7% of samples of citrus fruits from Northern cities of Pakistan were discovered to be infected with PAT, and the elevated amounts were found ranging from 0.04-320 µg/kg from Swat city. About 22.1% of samples of citrus fruits have levels of PAT greater than the suggested limits established by the European Union (EU). PAT's dietary intake levels ranged from 0.10-1.11 µg/kg bw/day from the central cities of Punjab, Pakistan, and 0.13-1.93 µg/kg bw/day were documented from Northern cities of Pakistan

Due to the digitization and Internet of Things revolutions, the present electronic world has a wealth of cybersecurity data. Efficiently resolving cyber anomalies and attacks is becoming a growing concern in today's cyber security industry all over the world. Traditional security solutions are insufficient to address contemporary security issues due to the rapid proliferation of many sorts of cyber-attacks and threats. Utilizing artificial intelligence knowledge, especially machine learning technology, is essential to providing a dynamically enhanced, automated, and up-to-date security system through analyzing security data. In this paper, we provide an extensive view of machine learning algorithms, emphasizing how they can be employed for intelligent data analysis and automation in cybersecurity through their potential to extract valuable insights from cyber data. We also explore a number of potential real-world use cases where data-driven intelligence, automation, and decision-making enable next-generation cyber protection that is more proactive than traditional approaches. The future prospects of machine learning in cybersecurity are eventually emphasized based on our study, along with relevant research directions. Overall, our goal is to explore not only the current state of machine learning and relevant methodologies but also their applicability for future cybersecurity breakthroughs.

Artificial Intelligence (AI) is a leading technology of the current age of the Fourth Industrial Revolution (Industry 4.0 or 4IR), with the capability of incorporating human behavior and intelligence into machines or systems. Thus AI-based modeling is the key to building automated, intelligent, and smart systems according to today's needs. To solve real-world issues various types of AI such as analytical, functional, interactive, textual, and visual AI can be applied to enhance the intelligence and capabilities of an application. However, developing an effective AI model is a challenging task due to the dynamic nature and variation in real-world problems and data. In this paper, we present a comprehensive view on "AI-based Modeling" with the principles and capabilities of potential AI techniques that can play an important role in developing intelligent and smart systems in various real-world application areas including business, finance, healthcare, agriculture, smart cities, cybersecurity and many more. We also emphasize and highlight the research issues within the scope of our study. Overall, the goal of this paper is to provide a broad overview of AI-based modeling that can be used as a reference guide by academics and industry people as well as decision-makers in various real-world scenarios and application domains.

Due to the rising dependency on digital technology, cybersecurity has emerged as a more prominent field of research and application that typically focuses on securing devices, networks, systems, data and other resources from various cyber-attacks, threats, risks, damages, or unauthorized access. Artificial Intelligence (AI), also referred to as a crucial technology of the current Fourth Industrial Revolution (Industry 4.0 or 4IR), could be the key to intelligently dealing with these cyber issues. Various forms of AI methodologies, such as analytical, functional, interactive, textual as well as visual AI can be employed to get the desired cyber solutions according to their computational capabilities. However, the dynamic nature and complexity of real-world situations and data gathered from various cyber sources make it challenging nowadays to build an effective AI-based security model. Moreover, defending robustly against adversarial attacks is still an open question in the area. In this paper, we provide a comprehensive view on "Cybersecurity Intelligence and Robustness", emphasizing multi-aspects AI-based modeling and adversarial learning that could lead to addressing diverse issues in various cyber applications areas such as detecting malware or intrusions, zero-day attacks, phishing, data breach, cyberbullying and other cybercrimes. Thus the eventual security modeling process could be automated, intelligent, and robust compared to traditional security systems. We also emphasize and draw attention to the future aspects of cybersecurity intelligence and robustness along with the research direction within the context of our study. Overall, our goal is not only to explore AI-based modeling and pertinent methodologies but also to focus on the resulting model's applicability for securing our digital systems and society.

The digital world has a wealth of data, such as Internet of Things (IoT) data, business data, health data, mobile data, urban data, security data, and many more, in the current age of the Fourth Industrial Revolution (Industry 4.0 or 4IR). Extracting knowledge or useful insights from these data can be used for smart decision-making in various applications domains. In the area of data science, advanced analytics methods including machine learning modeling can provide actionable insights or deeper knowledge about data, which makes the computing process automatic and smart. In this paper, we present a comprehensive view on "Data Science'' including various types of advanced analytics methods that can be applied to enhance the intelligence and capabilities of an application through smart decision-making in different scenarios. We also discuss and summarize ten potential real-world application domains including business, healthcare, cybersecurity, urban and rural data science, and so on by taking into account data-driven smart computing and decision making. Based on this, we finally highlight the challenges and potential research directions within the scope of our study. Overall, this paper aims to serve as a reference point on data science and advanced analytics to the researchers and decision-makers as well as application developers, particularly from the data-driven solution point of view for real-world problems.

Coating of suitable materials having thickness of few atoms to several microns on a substrate is of great interest to the scientific community. Hard coatings develop under the significant composition of suitable-natured atoms where their force-energy behaviors when in certain transition state favour binding. In the binding mechanism of suitable atoms, electron belonging to outer ring filled state of gas-atom undertakes another clamp of energy knot belonging to outer ring unfilled state of solid-atom. Set process conditions develop the binding of different-natured atoms when processing their suitable composition in a system. Atoms of different nature develop structure in the form of hard coating by locating their ground points between the original ones. Here, gas-natured atoms increase the potential energy under decreasing levitational force of electrons, whereas, solid-natured atoms decrease the potential energy under decreasing gravitational force of electrons. In TiN coating, Ti–Ti atoms bind under the difference of expansion of their lattices, called nets of energy knots, where one atom just lands on the already landed atom. An adhered N-atom to a Ti-atom forms its position among four Ti-atoms where N-atom occupies the interstitial site of Ti-atoms. Two oppositely working force-energy behavior atoms deposit in the form of coating at substrate surface as per set conditions of the process. The rate of ejecting (or dissociating) solid-natured atoms depend on the nature of their source (target), process parameters and processing technique. In random arc-based vapor deposition system, depositing differently natured atoms at substrate surface depends on the input power. In addition to intrinsic nature of atoms, different properties and characteristics of coatings emerge as per engaged forces under their involved energy. The present study sets new trends in the field of coatings involving the diversified class of materials and their counterparts.

In the current age of the Fourth Industrial Revolution ($4IR$ or Industry $4.0$), the digital world has a wealth of data, such as Internet of Things (IoT) data, cybersecurity data, mobile data, business data, social media data, health data, etc. To intelligently analyze these data and develop the corresponding real-world applications, the knowledge of artificial intelligence (AI), particularly, machine learning (ML) is the key. Various types of machine learning algorithms such as supervised, unsupervised, semi-supervised, and reinforcement learning exist in the area. Besides, the deep learning, which is part of a broader family of machine learning methods, can intelligently analyze the data on a large scale. In this paper, we present a comprehensive view on these machine learning algorithms that can be applied to enhance the intelligence and the capabilities of an application. Thus, this study's key contribution is explaining the principles of different machine learning techniques and their applicability in various real-world applications areas, such as cybersecurity, smart cities, healthcare, business, agriculture, and many more. We also highlight the challenges and potential research directions based on our study. Overall, this paper aims to serve as a reference point for not only the application developers but also the decision-makers and researchers in various real-world application areas, particularly from the technical point of view.

Artificial Intelligence (AI) is one of the key technologies of the Fourth Industrial Revolution (Industry 4.0), which can be used for the protection of Internet-connected systems from cyber-threats, attacks, damage, or unauthorized access. To intelligently solve today's various cybersecurity issues, popular AI techniques involving Machine Learning (ML) and Deep Learning (DL) methods, the concept of Natural Language Processing (NLP), Knowledge Representation and Reasoning (KRR), as well as the concept of knowledge or rule-based Expert Systems (ES) modeling can be used. Based on these AI methods, in this paper, we present a comprehensive view on "AI-driven Cybersecurity" that can play an important role for intelligent cybersecurity services and management. The security intelligence modeling based on such AI methods can make the cybersecurity computing process automated and intelligent than the conventional security systems. We also highlight several research directions within the scope of our study, which can help researchers do future research in the area. Overall, this paper's ultimate objective is to serve as a reference point and guidelines for cybersecurity researchers as well as industry professionals in the area, especially from an AI-based technical point of view.

Deep learning (DL), a branch of machine learning (ML) and artificial intelligence (AI) is nowadays considered as a core technology of today's Fourth Industrial Revolution (4IR or Industry 4.0). Due to its learning capabilities from data, DL technology originated from artificial neural network (ANN), has become a hot topic in the context of computing, and is widely applied in various application areas like healthcare, visual recognition, cybersecurity, and many more. However, building an appropriate DL model is a challenging task, due to the dynamic nature and variations in real-world problems and data. Moreover, the lack of core understanding turns DL methods into black-box machines that hamper development at the standard level. This article presents a structured and comprehensive view on DL techniques including a taxonomy considering various types of real-world tasks like supervised or unsupervised. In our taxonomy, we take into account deep networks for supervised or discriminative learning, unsupervised or generative learning as well as hybrid learning and relevant others. We also summarize real-world application areas where deep learning techniques can be used. Finally, we point out ten potential aspects for future generation DL modeling with research directions. Overall, this article aims to draw a big picture on DL modeling that can be used as a reference guide for both academia and industry professionals.

Deep learning (DL), which is originated from an artificial neural network (ANN), is one of the major technologies of today's smart cybersecurity systems or policies to function in an intelligent manner. Popular deep learning techniques, such as Multi-layer Perceptron (MLP), Convolutional Neural Network (CNN or ConvNet), Recurrent Neural Network (RNN) or Long Short-Term Memory (LSTM), Self-organizing Map (SOM), Auto-Encoder (AE), Restricted Boltzmann Machine (RBM), Deep Belief Networks (DBN), Generative Adversarial Network (GAN), Deep Transfer Learning (DTL or Deep TL), Deep Reinforcement Learning (DRL or Deep RL), or their ensembles and hybrid approaches can be used to intelligently tackle the diverse cybersecurity issues. In this paper, we aim to present a comprehensive overview from the perspective of these neural networks and deep learning techniques according to today's diverse needs. We also discuss the applicability of these techniques in various cybersecurity tasks such as intrusion detection, identification of malware or botnets, phishing, predicting cyber-attacks, e.g. denial of service (DoS), fraud detection or cyber-anomalies, etc. Finally, we highlight several research issues and future directions within the scope of our study in the field. Overall, the ultimate goal of this paper is to serve as a reference point and guidelines for the academia and professionals in the cyber industries, especially from the deep learning point of view.

In its 8th Malaysia Plan (MP*), the Malaysian government has given nanotechnology development a high priority and has been made a Strategic Research (SR) programme. Consequently, an exhaustive and long-term approach is essential. Additionally, specific laws are required to provide an optimal health and safety environment for workers. Consequently, the current study intends to assist Malaysian policymakers in promoting improved safety, risk assessment, and management for nanotechnology workplaces, as well as drafting a comprehensive policy for the recently released DOSH guideline in 2018. Utilizing a unique methodology, this study evaluated the assessment and management of nanotechnology health and safety risks in Malaysia using the international risk governance council (IRGC) framework. In addition to document analysis, n = 20 semi-structured interviews were conducted with representatives of several nanotechnology platforms to collect data that was then analyzed thematically. The research evaluated current workplace safety regulations and laws. Consequently, we propose a future dynamic strategy for Malaysian nanotechnology with more favourable upgrades supported by increased concentrations in the following areas: I policy creation, ii) comprehensive management system, iii) knowledge transfer, and iv) infrastructure management. In addition, the findings highlight the need of cross-sectional communication in bridging existing gaps. This study laid the groundwork for a more systematic and comprehensive health and safety strategy.

A large number of smart devices (things) are being deployed with the swift development of Inter- net of Things (IOT). These devices, owned by different organizations, have a wide variety of services to offer over the web. During a natural disaster or emergency (i.e., a situation), for example, relevant IOT services can be found and put to use. However, appropriate service matching methods are required to find the relevant services. Organizations that manage situation responses and organizations that provide IOT services are likely to be independent of each other, and therefore it is difficult for them to adopt a common ontological model to facilitate the service matching. Moreover, there exists a large conceptual gap between the domain of discourse for situations and the domain of discourse for services, which cannot be adequately bridged by existing techniques. In this paper, we address these issues and propose a new method, WikiServe, to identify IOT services that are functionally relevant to a given situation. Using concepts (terms) from situation and service descriptions, WikiServe employs Wikipedia as a knowledge source to bridge the conceptual gap between situation and service descriptions and match functionally relevant IOT services for a situation. It uses situation terms to retrieve situation related articles from Wikipedia. Then it creates a ranked list of services for the situation using the weighted occurrences of service terms in weighted situation articles. WikiServe performs better than a commonly used baseline method in terms of Precision, Recall and F measure for service matching.

With global climate change and resource constraints looming large, sustainable design has become a focus of attention for all industries. The purpose of this study was to investigate the attitudes and behavioural intentions of undergraduate fashion design students towards sustainable fashion practices. Undergraduate fashion design students (n = 441) from three universities in Guangdong Province, China, participated in this survey. By constructing different scales of environmental knowledge, attitude towards sustainable fashion practice and behavioural intention towards sustainable fashion practice, and by using structural equation modelling to analyse the relationship between environmental knowledge and sustainable fashion practice, the following conclusions were drawn: (1) environmental knowledge has a positive effect on attitude towards sustainable fashion practice (p＜0.05); (2) environmental knowledge has a positive effect on behavioural intention towards sustainable fashion practice (p＜0.05); (3) Subjective norms has a positive effect on behavioural intention towards sustainable fashion practice (p＜0.05). (4) Attitudes towards sustainable fashion practice play a mediating role in the relationship between environmental knowledge and intentions towards sustainable fashion practice behaviour (p＜0.05). The findings of this study have implications for environmental education for undergraduate fashion design students and for sustainable production in companies.

Joining of aluminium alloys to steels has been extensively studied, especially in the automotive sector. However, aluminium alloys are known to be difficult to join with steels when methods involving fusion welding are used because of hot cracking problem. Hence, a high strength joint between these dissimilar metals would be of benefit especially in reducing the weight of products. In this work the torch brazing method was applied to join AR500 steel with AA7075 aluminium alloy using Al-Si-Zn base filler metal at various flame times. The effect of the brazing work on the intermetallic phase formation and the mechanical strength of the joints were investigated. In this work, the maximum shear load obtained was 6460 N and the presence of the intermetallic phases had reduced the shear strength of the brazed joints. However, the torch brazing process using Al-Si-Zn filler metal had successfully facilitated the joining of these dissimilar metals.

Election Algorithm (EA) is a powerful metaheuristics model motivated by phenomena of the socio-political mechanism of the presidential election conducted in many countries. EA is selected as a topic of discussion due to its capability and robustness to carry out complex problems in the random-2SAT logic program. This paper utilizes a hybridized EA assimilated with the Hopfield neural network (HNN) in carrying out random logic program (HNN-R2SATEA). The efficiency of the proposed method was compared with the existing traditional exhaustive search (HNN-R2SATES) model and the recently introduced HNN-R2SATICA model. From the result obtained, clearly proven that based on our proposed hybrid model outperformed other existing model based on the Global Minima Ratio (ZM), Mean Absolute Error (MAE), Bayesian Information Criterion (BIC) and Execution Time (ET). The expected outcome portrays that the EA algorithm outperformed the other two algorithms in doing random-kSAT logic program. The results proved the robustness, effectiveness, and compatibility of the HNN-R2SATEA model.

Bioconvective flows have attracted attention in recent years due to actual and potential applications. In this paper, we consider a steady and laminar convective MHD flow of a nanofluid with heat, mass and microorganism transfer with a heat source/sink present. In addition, we assume there exists a first order chemical reaction. The governing partial differential equations (PDEs) are reduced to ordinary differential equations (ODEs) using the scaling group transformation and the associated boundary value problem is then solved. The influences of selected governing parameters on the dimensionless velocity, temperature, nanoparticle concentration, density of motile microorganisms, skin friction, heat transfer, mass transfer, and motile microorganism density rates are computed and discussed

Purpose: For businesses of all sizes, turnover is a significant issue that has a detrimental impact on organizational performance. This study investigates the variables influencing SME workers' intentions to leave their current employers. This study also examines the moderating effect of organizational commitment on the relationships between attitude, subjective norms, perceived behavioral control, and turnover intentions. Methodology: Six hypotheses were proposed regarding the connections between the initial TPB components and organizational commitment. Results: The PLS-SEM structural path analysis findings revealed that the three fundamental predictors of TPB significantly influence turnover intention, with perceived behavioral control most strongly influencing intention. Furthermore, the results revealed that organizational commitment moderated the relationship between TPB constructs and turnover intention. Practical Implications and Originality: This study used an extended TPB model to introduce fresh perspectives into the literature on SME workers' organizational commitment.

Differentiated instruction has been implemented in classrooms where students who come from various backgrounds require appropriate lessons that are tailored to their varied learning preferences. As the spread of coronavirus 19 (Covid-19) is becoming more rampant, online learning has been lifted up as the main platform of teaching and learning, forcing the need to shift from the conventional face-to-face classroom to online, or virtual, mode of knowledge transfer. Having such global phenomenon affecting education, how does it affect the implementation of differentiated instruction that has been practised regularly by teachers before the wake of Covid-19? Previous studies have shown how it is done in the normal classroom setting, and that the practice of differentiated instruction contributes to students’ motivation as well as academic performance. However, there is a need to explore how do teachers go about with online differentiated instruction and how does it affect the students, since online learning poses various threads to both teachers and students; and thus, one might argue the effectiveness of not only the teaching approach but also the overall teaching and learning outcomes. Borg’s framework of teacher cognition, which has been extensively used in exploring how teachers teach, can be utilized to document the practice of online differentiated instruction. This study aimed to explore the practice of online differentiated instruction by teachers and examined its impact on students’ motivation and academic performance during the Covid-19 outbreak. The participants of this study consists of 247 gifted students from a public school in Malaysia. To meet these aims, this study employed a mixed method research design, utilizing the framework of teacher cognition to explore the teachers’ practice of online differentiated through interviews; and, utilizing a survey design using a questionnaire to determine the impact of online differentiated instruction towards students’ motivation and academic performance. The findings revealed that although online differentiated instruction is feasible, however, appropriate combination of differentiation constructs need to be applied in order to achieve higher motivation and better academic performance among the students.

Nanofibres have gained increasing attention due to their advantages of having a high porous structure, narrow pore size and distribution, and a high specific surface area. One of the most efficient techniques for producing nanofibres is via electrospinning. Nanofibres are currently being used in various fields, including water filtration. Although nanofibres possess the ability to filter various components, the fibres generally have a low mechanical strength that can mitigate the performance over time. Therefore, in overcoming this issue, several studies have focused on improving the strength of the nanofibre membranes for a water filtration application. This review discusses the advantages and challenges of nanofibres for water filtration membranes and summarises the methods to increase the strength of the membranes, including solvent vapour, thermal treatment, and chemical crosslinking.

Assessment of the trends of land cover and vegetation dynamics (VD) using remote sensing (RS) and indicators such as anthropogenic activities and the socio-demographic information is essential in order to make proper planning for sustainable management. This paper attempts to evaluate land cover change (LCC) and VD in Kebbi State, Nigeria using historical Landsat data from 1986-2016 by means of remote sensing. The Driver-Pressure-State-Impact-Response (DPSIR) framework was later employed using both primary and secondary data for a better understanding of the drivers, the state of the environmental condition, the causes as well as the impact of the change. The images were classified into five thematic land cover classes as Dense Vegetation, shrubs/built area, farmland, bare/grassland and water body by means of Maximum likelihood supervised classification technique in accordance with Anderson classification scheme level 1, with acceptable accuracy. Pre-classification and post-classification change detection (CD) methodologies were executed using Normalized difference vegetation index (NDVI) and Image differencing respectively. The study illustrates a steady decline in dense vegetation and shrubs/build areas while farmland and bare/grassland increases, however, water bodies remain unchanged. The DPSIR pin-point that the major drivers of change in the study area have been the pressing need for farming land as the population grows and socioeconomic demands including fuelwood consumption and endemic poverty. Expansion of Farming land, fuelwood consumption and the need for construction materials are identified as the main key elements exerting pressure for the change. The state of the condition indicates a steady decline in dense vegetation and shrubs areas while farmland and bare/grassland are increasing significantly. The impacts include land degradation, the decline in the provision ecosystem goods and services, biodiversity loss through loss of habitats. The study, however, noted that many international and national policies in response to land degradation are channelled toward land restoration and remediating of the environment, through afforestation programs and improving the livelihood of the rural people through providing alternative income sources since they depend heavily on land for sustenance. However, the state governments, communities and individual commonly organized annual tree planting campaign with the main purpose of environmental protection.

In this paper, we present a framework that automatically labels Latent Dirichlet Allocation (LDA) generated topics using sentiment and aspect terms from COVID-19 tweets to help the end-users by minimizing the cognitive overhead of identifying key topics labels. Social media platforms especially Twitter are considered as one of the most influential sources of information for providing public opinion related to a critical situation like the COVID-19 pandemic. LDA is a popular topic modelling algorithm that extracts hidden themes of documents without assigning a specific label. Thus automatic labelling of LDA-generated topics from COVID-19 tweets is a great challenge instead of following the manual labelling approach to get an overview of wider public opinion. To overcome this problem, in this paper, we propose a framework named \texttt{SATLabel} that effectively identifies significant topic labels using \textit{top unigrams features of sentiment terms and aspect terms clusters from LDA generated topics} of COVID-19 related tweets to uncover various issues related to the COVID-19 pandemic. The experimental results show that our methodology is more effective, simpler, and traces better topic labels compare to the manual topic labelling approach.

Purpose: The pandemic, named COVID-19, which shook global economy, production and trade has equally affected the social and domestic lives of ours. In this study the COVID-19’s impact has been investigated on lack of social interaction, financial stress and how it influences the domestic violence in a developing country like Pakistan. The study focuses on some of the important factors that are root causes of increased domestic violence in Pakistan. Design/methodology/approach: The study is quantitative and survey questionnaire has been conducted for structural equation modelling (SEM) to evaluate the hypotheses. The modified scale was validated using confirmatory factor analysis, the Purposive and snowball sampling technique is used for collecting data from 200 respondents of Punjab Pakistan for data analysis through SPSS and SmartPLS. Findings: It is revealed that Covid 19 has a significant effect on lack of social interaction and financial stress. Moreover, lack of social interaction and financial stress also enhances domestic violence. Finally, lack of social interaction and financial stress mediates COVID-19 and domestic violence. Originality/value: This study appears to be frontier research which determines the impact of COVID-19 on lack of social interaction, financial stress and domestic violence particularly in a developing country like Pakistan.

A biofilm is any syntrophic consortium of microorganisms in which cells adhere to one another and, in some cases, to a surface. These adherent cells become encased in a slimy extracellular matrix made up of extracellular polymeric substances (EPSs). Until now, the use of commercial disinfectants remains the main strategy to control biofilm-mediated problems. This mini review summarizes common antibiofilm mode of actions taken by disinfectants and how water channels in microbial biofilms contribute to disinfectant resistance.

A sustainable, scalable source of energy‐dense chemical fuel is urgently needed to ensure the security of our energy supply for future generations. Solar energy is the only renewable energy source of sufficient scale to replace fossil fuels and meet rising environmental demand. Hydrogen is expected to play a key role as an energy carrier in future energy systems of the world. As fossil fuel supplies become scarcer and environmental concerns increase, hydrogen is likely to become an increasingly important chemical energy carrier and eventually may become the principal chemical energy carrier. When most of the world’s energy sources become non-fossil based, hydrogen and electricity are expected to be the two dominant energy carriers for the provision of end-use services. Photocatalytic hydrogen evolution from water by solar energy over semiconductors offers a promising way for clean and renewable production of hydrogen. The TiO2-based materials have received considerable attention in recent years due to their extensive application in photocatalysis for hydrogen evolution. Though TiO2 is the most widely investigated photocatalyst for hydrogen evolution, it still provides low photocatalytic activity due to the wide bandgap that results in photocatalytic activity only under ultraviolet (UV) irradiation. Modification of TiO2 photocatalysts with several transition metals has been extensively studied to extend the absorbance capacity of TiO2 into the visible range. The effect of different photocatalytic deposition and reaction parameters also play major roles in enhancing the photostability of photoanode and increasing the hydrogen gas output, respectively.

Moringa oleifera is a miracle plant with many nutritional and medicinal properties. Chemopreventive value of the combined mixture of moringa leaves and seed residues (MOLSr) at different ratios (M1S9, M1S1 and M9S1) were investigated. MOLSr extracts were subjected to phytochemical screening, antioxidant assays, metabolite profiling and cytotoxic activity on various human cancer cell lines including primary mammary epithelial cells (PMEC). The MOLSr ratio with the most potent antiproliferative activities were used in xenograft mice injected with MDA-MB-231 cell lines for in vivo tumourigenicity study as well as protein and gene expression studies. M1S9, specifically comprised of saponin and amino acid, retained the lowest antioxidant activity and highest glucosinolates content as compared to other ratios. Cell viability decreased significantly in MCF-7 breast cancer cells and PMEC after treatment with M1S9. Solid tumour from MDA-MB-231 xenograft mice was inhibited up to 64.5% at third week after treatment with high-dose M1S9. High-dose M1S9 significantly decreased the expression of calcineurin (CaN) and vascular endothelial cell growth factor (VEGF) proteins as well as the secreted frizzled-related protein 1 (SFRP1) and solute carrier family 39 member 6 (SLC39A6) genes. This study provides new scientific evidence for the chemoprevention properties of MOLSr in breast cancer model.

Disease classification based on biological data is an important area in bioinformatics and biomedical research. It helps the doctors and medical practitioners for the early detection of disease and support them as a computer-aided diagnostic tool for accurate diagnosis, prognosis, and treatment of disease. Earlier Microarray gene expression data have wide application for the classification of disease, but now Next-generation sequencing (NGS) has replaced the Microarray technology. From the last few years, RNA sequence (RNA-Seq) data are widely used for the transcriptomic analysis. Hence, RNA-Seq based classification of disease is in its infancy. In this article, we present a general framework for the classification of disease constructed on RNA-Seq data. This framework will guide the researchers to process RNA-Seq, extract relevant features and apply the appropriate classifier to classify any kind of disease.

Sentiment analysis is a process of extracting opinions into the positive, negative, or neutral categories from a pool of text using Natural Language Processing (NLP). In the recent era, our society is swiftly moving towards virtual platforms by joining virtual communities. Social media such as Facebook, Twitter, WhatsApp, etc are playing a very vital role in developing virtual communities. A pandemic situation like COVID-19 accelerated people's involvement in social sites to express their concerns or views regarding crucial issues. Mining public sentiment from these social sites especially from Twitter will help various organizations to understand the people's thoughts about the COVID-19 pandemic and to take necessary steps as well. To analyze the public sentiment from COVID-19 tweets is the main objective of our study. We proposed a deep learning architecture based on Bidirectional Gated Recurrent Unit (BiGRU) to accomplish our objective. We developed two different corpora from unlabelled and labeled COVID-19 tweets and use the unlabelled corpus to build an improved labeled corpus. Our proposed architecture draws a better accuracy of 87% on the improved labeled corpus for mining public sentiment from COVID-19 tweets.

Smartphones are prone to SMS phishing due to the rapid growth in the availability of smart mobile technologies driven by Internet connections. Also, detecting phishing SMS is a challenging task due to the unstructured nature of SMS text data with non-linear complex correlations. In this concern, considering the recent advancements in the domain of cybersecurity, we have proposed a hybrid deep learning framework that extracts robust features from SMS texts followed by an automatic detection of Phishing SMS. Due to combining the potential capability of individual models into one hybrid framework, it has outperformed various other individual machine learning and deep learning models. The proposed Phishing Detection framework is an effective hybrid combination of pretrained transformer model, MPNet (Masked and Permuted Language Modeling), with supervised ConvNets (CNN) and Bi-directional Gated Recurrent Units (GRU). It is intended to successfully detect unstructured short phishing text messages that contain complex patterns.

Almost all single-family detached house in Canada consume huge electricity for space heating and domestic hot water (DHW) purposes. There are many possibilities to design an energy-efficient house. A solar water heating system can be used for domestic water and space heating. Water temperature can be kept constant always by connecting a heat pump or oil burner because solar energy is intermittent. Proper and optimized solar photovoltaic and collector design, tank design, heat pump selection, house insulation, total demand calculation in each section are essential. Energy-Efficient house design has been proposed with water heating and space heating system and compared with the existing system, solar PV based systems, and solar collector based system. The tracking and non-tracking based solar thermal collector based and the solar photovoltaic based system has been compared in this paper and investigate the suitable one for practically applicable and acceptable by the people. Simulation has been done by using the PolySun software. It found that by implementing the proposed PV based system with tracking is highly suitable considering lower cost, high output power, flexibility, easy installation.

The information on the land use and soil conservation practice based on year 2006, 2010 and 2014, hence offering an opportunity to model the impacts of land use change on erosion, deposition and surface water runoff. Limitation in the use of hydrological models had been their inability to handle the large amount of input data that describe the heterogeneity of the natural system. In this study, a procedure that takes into account soil conservation practice based on the land use change, the response of soil erosion and sediment export from the George Town Conurbation catchment area, and average annual sediment yields were estimated for each grid cell of the watershed to identify the critical erosion areas of rural and urban planning proposes. Average annual sediment yield and data on a grid basis estimated using Universal Soil Loss Equation (USLE) and an emerging technology represented by Geographic Information System (GIS) used as a tool to produce a map for erosion rate. The changing of the land use from forest to agriculture and then to an urban area is a challenging task to research on land use demand for population, and environmental impact assessment is important for the planning of natural resources management, allowing research the modification of land use properly and implement more sustainable for long term management strategies. The challenge is to formulate strategies that would promote an integrated approach to the land use planning at an appropriate level as to address the issues that arose. Modelling for creating urban growth boundary for the George Town Conurbation must have to be controlled surface runoff and soil loss and sediment export from land use of the George Town Conurbation catchment.

Three-Dimensional mesoporous TiO2 scaffolds of anatase phase possess inherent eximious optical behavior that are beneficial in designing photoelectrodes for solar energy conversion applications. However, substantial efforts have been devoted in maximizing the UV and/or visible light absorption efficiency, and suppressing the annihilation of photogenerated charged species in pristine mesoporous TiO2 structure for improved solar illumination conversion efficiencies. This study provides the fundamental insights into Mxene functionalized mesoporous TiO2 as photoelectrode for the first time. This novel combination of Mxene functionalized TiO2 electrodes with and without TiCl4 treatments have been successfully optimized to intensify the process of photon absorption, charge segregation and photocurrent, resulting in superior photoelectrode performance. The photocurrent measurements of prepared photoelectrodes are significantly enhanced upon increased contents of Mxene due to improved absorption efficiency within the visible region as verified by UV–Vis absorption spectroscopy. Moreover, as evident through structural analysis, the anatase phase of TiO2 is well grown due to increased contents of Mxene and post-deposition heat treatments. Consequently, an appreciable coverage of well-developed grains on FTO surface observed in SEM images. Thereby, the newly fabricated conductive mesoporous TiO2 photoelectrodes are potential candidates for photoinduced energy conversion and storage purposes.

The Ranau Earthquake that struck on 5, June 2015 and follow by February 2018 and April 2021, were a new disaster in Sabah and caused many Sabahan to panic. The unpredicted disaster also caused a serious impact on all aspects of life in Sabah. The earthquake has caused severe damage to eight primary schools in the vicinity of the epicenter; although no casualties were reported. However, the disaster has passing deep psychological effects among students. In this study, we examine how the primary school teachers enabled the student to be resilient during and after the disaster. Based on the interviews of 16 primary school students it was revealed that most of the teachers used WhatsApp to support resilience during and after the earthquake. Interviews with 16 primary school teachers revealed there were two main reasons for them to communicate with students namely, delivering emotional aid and monitoring their stress. Based on student interviews, five content categories of emotional support were identified: caring, reassuring, emotion sharing, belonging, and distracting. The main contribution of this study is social media can be used as a spontaneously and proactive tool to support student's resilience during and after the earthquake trauma.

Cities are undergoing huge shifts in technology and operations in recent days, and `data science' is driving the change in the current age of the Fourth Industrial Revolution (Industry 4.0 or 4IR). Extracting insights or actionable knowledge from city data and building a corresponding data-driven model is the key to making a city system automated and intelligent. Data science is typically the study and analysis of actual happenings with historical data using a variety of scientific methodology, machine learning techniques, processes, and systems. In this paper, we concentrate on and explore ``Smart City Data Science", where city data collected from various sources like sensors and Internet-connected devices, is being mined for insights and hidden correlations to enhance decision-making processes and deliver better and more intelligent services to citizens. To achieve this goal, various machine learning analytical modeling can be employed to provide deeper knowledge about city data, which makes the computing process more actionable and intelligent in various real-world services of today's cities. Finally, we identify and highlight ten open research issues for future development and research in the context of data-driven smart cities. Overall, we aim to provide an insight into smart city data science conceptualization on a broad scale, which can be used as a reference guide for the researchers, professionals, as well as policy-makers of a country, particularly, from the technological point of view.

In a computing context, cybersecurity is undergoing massive shifts in technology and its operations in recent days, and data science is driving the change. Extracting security incident patterns or insights from cybersecurity data and building corresponding data-driven model, is the key to make a security system automated and intelligent. To understand and analyze the actual phenomena with data, various scientific methods, machine learning techniques, processes, and systems are used, which is commonly known as data science. In this paper, we focus and briefly discuss cybersecurity data science, where the data is being gathered from relevant cybersecurity sources, and the analytics complement the latest data-driven patterns for providing more effective security solutions. The concept of cybersecurity data science allows making the computing process more actionable and intelligent as compared to traditional ones in the domain of cybersecurity. We then discuss and summarize a number of associated research issues and future directions. Furthermore, we provide a machine learning-based multi-layered framework for the purpose of cybersecurity modeling. Overall, our goal is not only to discuss cybersecurity data science and relevant methods but also to focus the applicability towards data-driven intelligent decision making for protecting the systems from cyber-attacks.

Cyber security has recently received enormous attention in today’s security concerns, due to the popularity of the Internet-of-Things (IoT), the tremendous growth of computer networks, and the huge number of relevant applications. Thus, detecting various cyber-attacks or anomalies in a network and building an effective intrusion detection system that performs an essential role in today’s security is becoming more important. Artificial intelligence, particularly machine learning techniques, can be used for building such a data-driven intelligent intrusion detection system. In order to achieve this goal, in this paper, we present an Intrusion Detection Tree (“IntruDTree”) machine-learning-based security model that first takes into account the ranking of security features according to their importance and then build a tree-based generalized intrusion detection model based on the selected important features. This model is not only effective in terms of prediction accuracy for unseen test cases but also minimizes the computational complexity of the model by reducing the feature dimensions. Finally, the effectiveness of our IntruDTree model was examined by conducting experiments on cybersecurity datasets and computing the precision, recall, fscore, accuracy, and ROC values to evaluate. We also compare the outcome results of IntruDTree model with several traditional popular machine learning methods such as the naive Bayes classifier, logistic regression, support vector machines, and k-nearest neighbor, to analyze the effectiveness of the resulting security model.

Computer network attacks are evolving in parallel with the evolution of hardware and neural network architecture. Despite major advancements in Network Intrusion Detection System (NIDS) technology, most implementations still depend on signature-based intrusion detection systems, which can’t identify unknown attacks. Deep learning can help NIDS to detect novel threats since it has a strong generalization ability. The deep neural network’s architecture has a significant impact on the model’s results. We propose a genetic algorithm based model to find the optimal number of hidden layers and the number of neurons in each layer of the deep neural network (DNN) architecture for the network intrusion detection binary classification problem. Experimental results demonstrate that the proposed DNN architecture shows better performance than classical machine learning algorithms at a lower computational cost.

Electrification coverage in Sarawak is the lowest at 78.74%, compared to Peninsular Malaysia at 99.62% and Sabah at 82.51%. Kapit, Sarawak with its 88.4% populations located in rural areas and mostly situated along the main riverbanks has great potential to generate electrical energy by hydrokinetic system. Yearly water velocity data is the most significant parameter to perform hydrokinetic analysis study. Nevertheless, the data retrieved from local river databases are inadequate for river energy analysis, thus hindering its progression. Instead, flow rates and rainfall data had been utilised to estimate the water velocity data. This signifies no estimation of water velocity in an unregulated river by using water level data had been made. Therefore, a novel technique of estimating the daily average water velocity data in unregulated rivers is proposed. The modelling of regression equation for water velocity estimation was performed and two regression model equations were generated to estimate both water level and water velocity on-site and proven to be valid as the coefficient of determination values had been R² = 87.4% and R²=87.9%, respectively. The combination of both regression model equations can be used to estimate long-term time series water velocity data for type-C unregulated river in remote areas.

Global waste generation keeps increasing over the year and requires innovative solutions to minimize their impacts on environmental quality and public health. Predicted 2.2 billion tonnes per year of global municipal waste generation in the year 2025 which 1.6 fold is higher than in 2012. Hence, a strategic plan must be ascertained to overcome the future challenges of MSW locally and globally. Universiti Putra Malaysia (UPM) coined an initiative to demonstrate a showcase pilot plant for green energy production from MSW. Therefore, the data was obtained from the survey and actual sampling within the UPM compound to estimate the MSW generated and it's potentially used for green energy production. It is estimated that 5.0 – 7.0 tonne per day of MSW generated which about 30 - 35% is an organic fraction. Upon separation, the organic fractions were digested into biogas through anaerobic. At the maximum conversion of organic fraction, about 775 kWh of electricity may able to generate from the waste. In this study, the complete biorefinery setup and utilize organic components from the MSW generated in UPM was proposed that the biogas subsequently will be used to produce green energy in the form of electricity or cooking fuel.

Nigella sativa (NS) is an effective medicinal plant possessing noteworthy antioxidant property. In NS, there are more than hundred phyto-chemicals reported, out of which thymoquinone is the utmost active phyto-constituent having sturdy antioxidative property. Thymoquinone is a cyclicdione, when reacts with sodium azide, converts into α-azido ketones i.e its analogs which are handy with extensive range of reactions. Sodium azide induces stress in plants thereby, modulating the antioxidant system. The present investigation was planned to elucidate the effect of sodium azide at different concentrations (5µM, 10µM, 20µM, 50µM, 100µM and 200µM) on its secondary metabolites (mainly thymoquinone) in NS callus culture extract (NSE). The results showed sodium azide effect on thymoquinone content and a concentration dependent boost in antioxidant property. It was also observed that thymoquinone content and percent yield (analyzed by RP-HPLC; Reverse Phase- High Performance Liquid Chromatography) were minimum (0.033±0.006% and 0.420±0.045%, respectively) at 200 µM sodium azide used. Whereas, antioxidant activity (analyzed by DPPH; 2, 2-diphenyl-1-picrylhydrazyl) was found to be maximum (3.873±0.402%) at same dose. Further, analysis was done for inhibition of oxidative DNA damage at different concentrations of sodium azide on NSE, maximum inhibition of DNA damage (0.243±0.017%) was found at 200 µM concentration of sodium azide. When correlated, strong positive correlation was observed between percent yield and percent thymoquinone, antioxidant property and inhibition of DNA damage. Whereas, strong negative correlation was observed between percent yield and antioxidant property, percent thymoquinone and antioxidant property, percent thymoquinone and inhibition of DNA damage. The findings evidently point out that the content of thymoquinone, antioxidant property and inhibition of DNA damage was affected by sodium azide.

Short Message Service (SMS) is becoming the secure medium of communication due to large-scale global coverage, reliability, and power efficiency. As person--to--person (P2P) messaging is less secure than application-to-person (A2P) messaging, anyone can send a message, leading to the attack. Attackers mistreat this opportunity to spread malicious content, perform harmful activities, and abuse other people, commonly known as spam. Moreover, such messages can waste a lot of time, and important messages are sometimes overlooked. As a result, accurate spam detection in SMS and its computational time are burning issues. In this paper, we conduct six different experiments to detect SMS spam from the dataset of 5574 messages using machine learning classifiers such as Multinomial Naïve Bayes (MNB) and Support Vector Machine (SVM), considering variations of \textit{Term Frequency-- Inverse Document Frequency (TF--IDF)} features for exploring the trade-off among accuracy, F1-score and computational time. The experiments achieve the best result of the accuracy of 98.50\%, F1--score of 98\%, and area under roc curve (AUC) of 0.97 for multinomial naïve bayes classifier with TF--IDF after stemming.

Recently, spam emails have become a significant problem with the expanding usage of the Internet. It is to some extend obvious to filter emails. A spam filter is a system that detects undesired and malicious emails and blocks them from getting into the users' inboxes. Spam filters check emails for something "suspicious" in terms of text, email address, header, attachments, and language. However, we have used different features such as word2vec, word n-grams, character n-grams, and a combination of variable length n-grams for comparative analysis in our proposed approach. Different machine learning models such as support vector machine (SVM), decision tree (DT), logistic regression (LR), and multinomial naïve bayes (MNB) are applied to train the extracted features. We use different evaluation metrics such as precision, recall, f1-score, and accuracy to evaluate the experimental results. Among them, SVM provides 97.6 \% of accuracy, 98.8\% of precision, and 94.9\% of f1-score using a combination of n-gram features.

The present study explained factors influencing citizen satisfaction service in the Investment and One-Stop Service Agency of Tanah Bumbu Regency. In particular, this research analyses the level of citizen satisfaction and the extent to which Awareness, Rules, Organizational, Income, Skill-Ability, and Service Facility Factor influence Citizen Satisfaction. This study uses a mixed methodology with a sequential explanatory strategy. Using the incidental sampling with Slovin's Formula to calculate the number of samples is 93 respondents. The quantitative data were analyzed by the SmartPLS 3.0 program. The findings showed that the level of citizen satisfaction is included in the category "Satisfied". Furthermore, the variable of Citizen Satisfaction is influenced by variables of Awareness, Rules, Organizational, Income, Skill-Ability dan Service Facility Factor for 70,5%. Whereas Awareness, Rules, Organizational, and Skill-Ability Factor has a significant influence on Citizen Satisfaction. Besides, Income and Service Facility Factor do not have a significant influence on Citizen Satisfaction.

Populaces are prominent indicators of livability in creating ‘street life’ for cities and public spaces. Evaluating people’s experiences is significant in creating a city liveliness and urban heritage trail. The exploration of design strategies that could allow them to integrated and connected with other spaces in the context of city and heritage as well as creating a social life among them. The measuring variables are people’s experience on the spaces; thus, create the pattern of behavior, which cause spaces liveliness, using Kuala Lumpur Heritage Trail as an example of pedestrian priority streets, city environment and heritage value. The aim of this research is to evaluate people’s experiences and analyze their behavior towards the urban street design within cities environment and Malaysia heritage values. The analyzed review comprising on the livability of the street in the context of interrelation between behavioral patter of people and the preferences of urban heritage. Hence, this paper will give an understanding of how people experiences the presence of urban streets and heritage values, thus, bringing liveliness to the streets.

Agroforestry practices evolve with the development of basic and advanced facilities, changes in natural and artificial factors of land use change. The study aims to examine the socioeconomic characteristics and compare satisfaction levels across forest products and vegetable farming of the agroforestry community in Khost Province. Data were collected from 662 farmers and was analyzed using univariate Analysis of Variances (ANOVA) and Multivariate Analysis of Variances (MANOVA). The results found that forest and vegetable products, including fruits, berries, herbs, mushrooms, wild animals, oils, wood, honey, okra, eggplant, carrot, cucumber, pine nuts, pepper, and timber has different impact in terms of satisfaction with basic and advanced facilities, knowledge about land use and impacts, natural and artificial factors of land use change, and positive and negative impact of land use change. The limitation of the study included an absence of exogenous factors in the model such as climate change, financial conditions, market fluctuations, regulatory system, an area in which the study is selected, research design, and current condition of endogenous factors. Overall, agroforestry practices can improve the socioeconomic development of agroforestry-dependent communities in Khost Province, Afghanistan. This study provided useful insights for policymakers and development practitioners to promote agroforestry practice adoption and improve the socioeconomic development of agroforestry-dependent communities. Future works could explore the implications of agroforestry practices on the socioeconomic development of other dependent communities in Afghanistan.

In this study, we construct a new Atangana-Baleanu fractional model for whooping cough disease to predict future dynamics of the disease, as well as to suggest strategies to eliminate the disease in an optimal way. We prove that the proposed model has a unique solution which is positive and bounded. To measure contagiousness of the disease, we determine the reproduction number R0 and use it to examine the local and global stability at equilibrium points that have symmetry. Through sensitivity analysis, we determine parameters of the model that are most sensitive to R0. The ultimate aim of this research is to analyze different disease prevention approaches in order to find the most suitable one. For this, we include the vaccination and quarantine compartments in the proposed model and formulate an optimal control problem to assess the effect of vaccination and quarantine rates on disease control in three distinct scenarios. Firstly, we study the impact of vaccination strategy and conclude findings with presentation of graphical results. Secondly, we examine the impact of quarantine strategy on whooping cough infection with possible elimination from the society. Lastly, we implement vaccination and quarantine strategies together to visualize their combine effect on infection control. In addition to the study of an optimal control problem, we examine the effect of fractional order on disease dynamics as well as the impact of constant vaccination and quarantine rates on disease transmission and control. We determine that the optimal control strategy with the three controls is more effective in reducing the spread of whooping cough infection. Implementation of Toufik-Atangana type numercial scheme both for the state and adjoint equations is another contribution of this article.

Extensive research has been conducted on printable antenna technologies, believed to be fast-growing due to their significant impact on wireless devices. It is necessary to study the progress of printable antenna technology as they are core devices for wireless technology today. This review work offers a comprehensive account of the previous and recent research achievements based on the principle of printable antenna, and parametric studies of several key design parameters, for future wireless network applications. The systems considered for evaluation include broadband techniques, large Bandwidth, high gain, dual/multi-band, or reconfigurable structure, low-profile, size-reduction, compact, linear, or circular polarization applications. It also highlights the fabrication procedures, and the numerous material characteristics affecting the antenna performance for various wireless applications with design considerations. Fully printed antennas on different substrates and conductive ink were investigated, including polyethylene terephthalate (PET), synthetic paper (Teslin), resin-coated photo paper, and Kapton polyimide substrates, among many others. The findings show that the fully inkjet-printed antenna made fabrication easy, improving the accuracy and conductivity of the printed patterns by concentrating on the inherently difficult problems and opportunities. Inkjet-printed antennas are believed to be the futuristic demand for sustainability and wireless solution in several ways.

The integration of artificial intelligence (AI) into academic settings in Sabah, Malaysia, is transforming education and research landscapes. While AI technologies promise to enhance teaching, learning, and scholarly activities, they also pose challenges such as ethical concerns and skill gaps among academic staff. This study addresses the multifaceted impacts of AI adoption on academicians in Sabah, focusing on two key research questions: the impact of AI-based intelligent tutoring systems on student engagement, learning outcomes, and educational equity, and the challenges and opportunities in building academicians' capacity to integrate AI technologies effectively. Through a multidisciplinary approach, incorporating insights from education, computer science, social sciences, and ethics, this research aims to evaluate the effectiveness of AI tools in educational settings and identify strategies for skill development and infrastructure support. The study recommends empirical assessments within Sabah's educational institutions, considering contextual factors and fostering collaborative partnerships with local communities. Professional development programs, collaboration with industry partners, and improved access to AI infrastructure are proposed strategies. Longitudinal studies and interdisciplinary research initiatives are suggested for future research, along with qualitative methods to capture diverse perspectives. Ultimately, by embracing a collaborative and multidisciplinary approach, Sabah's academic community can harness the transformative potential of AI to advance education, research, and scholarship while promoting ethical and inclusive practices.

Abstract: In recent years, the construction engineering sector has undergone a transformative shift towards the integration of machine learning (ML) techniques, particularly in predicting the properties of steel fiber-reinforced concrete (SFRC). Despite the theoretical sophistication of existing models, a persistent challenge remains – their opacity, lacking transparency and real-world relevance for practi-tioners. To address this gap and advance our current understanding, this study employs the extra gradient (XG) Boosting algorithm, crafting a comprehensive ap-proach. Grounded in a meticulously curated database drawn from 43 seminal pub-lications, encompassing 420 distinct records, this research focuses predominantly on three primary fiber types: crimped, hooked, and mil-cut. Complemented by hands-on experimentation involving 20 diverse SFRC mixtures, this empirical campaign is further illuminated through the strategic use of Partial Dependence Plots (PDPs), revealing intricate relationships between input parameters and con-sequent compressive strength. A pivotal revelation of this research lies in the identification of optimal SFRC formulations, offering tangible insights for real-world applications. The developed ML model stands out not only for its sophistication but also its tangible accuracy, evidenced by exemplary performance against inde-pendent datasets, boasting a commendable mean target-prediction ratio of 99%. To bridge the theory-practice gap, we introduce a user-friendly digital interface, thri-ughly designed to guide professionals in optimizing and accurately predicting the compressive strength of SFRC. This research thus contributes to the construction and civil engineering sectors by enhancing predictive capabilities and refining mix designs, fostering innovation, and addressing the evolving needs of the industry.

Abstract: Heavy metals (HMs) contamination is one of the main among abiotic factors affecting crop productivity and also threatens human health via consuming metal contaminated crops as a food source. Over the past few years, HMs have drawn a lot of attention due to their increased use for commercial purposes and their harmful effects on plants and other life forms, thus threatening human survival. However, in recent years, several methods have been adopted to combat the harsh effects of HMs. After phytohormones, use of mineral nutrients such as selenium (Se) in the prevention of HM stress has been explored by the researchers more recently. Selenium is an important micronutrient widely known for its antioxidant properties in both plants and animals. Exogenous Se inhibits metal uptake and its translocation and also improves the antioxidant system, thus imparts resistance to HM toxicity in plants. Moreover, Se also regulates the production of various osmolytes in cells that helps in developing cell osmolarity. Selenium also induces the production of different types of secondary metabolites (SMs) that are also involved in plant's secondary defense mechanisms to different stresses. Uptake of mineral nutrients is a vital process for plant growth and development, which is also positively correlated with Se under metalloid toxicity. However, in order to understand the exact mechanism of Se in HM tolerance, different metabolic processes stimulated by Se and their pathways need to be explored. Hence, this review focuses on the role of Se on nutritional status, antioxidants metabolism, interaction with phytohormones and its role in the regulation of various genes involved in Se induced HM tolerance. Thus, this study will help researchers in the future for the improvement of HM tolerance via Se application in plants.

Mucosal vaccines can target specific mucosal surfaces, such as the respiratory, genital, or intestinal mucosa. Conventional systemic immunization, such as intramuscular injections, do not provide mucosal immunity, including IgA, nor do they prevent pathogens from entering the mucous membranes. Nasal immunization protects mucosal membranes, but nasal antigen presentation appears to entail adjuvant to stimulate immunogenicity. Current treatments for mucosal diseases such as inflammatory bowel disease (IBD) and allergic dermatitis only aimed to temporarily relieve symptoms. Moreover, these treatments not only have drug resistance or side effects, but the disease can recur, leading to switching to other treatments. Therefore, there is a need to develop safe and effective treatments that provide better long-term outcomes to reduce the risk of recurrence. Regulatory T (Treg) cells have been used to suppress inflammation. To find advances in mucosal treatment, we investigated the therapeutic effects of intranasal pep27 mutant immunization. Here, a new method of Treg induction through intranasal immunization without adjuvant has been developed to potentially overcome allergies and mucosal inflammation of the lung-gut axis in animal models. The implementation of the pep27 mutant for these therapies should be preceded by studies of Treg resilience through clinical translational studies of dietary changes.

This paper presents a new proof of the infinite nature of prime numbers. Grounded in fundamental Set theory and Analysis, the proof uses the method of contradiction to demonstrate the absurdity of assuming the set of all prime numbers to be finite.

The generation of arithmetic sequences involves arithmetic operations. However, is it possible to generate such sequences without being subject to any arithmetic or related operations, all by just hand? The answer may be negative, as the very rule defining these sequences itself relies on arithmetic operations. Nonetheless, this paper presents a few results demonstrating that the exact sequences of $an$, where, $a \in \{ 2,3,\cdots,9,10\}$ and $n \in \mathbb N \cup \{0\}$, can indeed be generated up to any desired number of terms without relying on any arithmetic operations and others derived from such. This is done by the formation of a specialized table that leverages numerical patterns and the notion of concatenation.

Abstract: The effect of some weather parameters (rainfall and temperature) on the production of oil palm in Peninsular Malaysia was investigated. Data were analysed using the Statistical Package for Social Sciences (SPSS 20.0 version), with descriptive statistics, time series analysis, and multiple linear regression (MLR) carried out. SPSS and Microsoft Excel 2010 were used to analyse the results. The MLR model determined the strength of the relationship between oil palm yield (dependent variable) and the changing variables of temperature and rainfall (independent variables). The regression output returned three components; regression coefficients, regression statistics and ANOVA. The findings of the study revealed medium to high rainfall variability at the rate of 0.0008. This implies that rainfall is increasing over time with variations in its amount and intensity. As rainfall increases oil palm FFB production is predicted to increase at a slow rate of 0.0009. The estimation of average annual temperature indicated an increase of 5.6℃ at the rate of 0.0357℃ per year with a temperature maximum of 32.01℃ and minimum of 25.45℃. The result also revealed an increase in oil palm yield at the rate of 0.2581 per year with a mean value of 176247.6. Overall, there is a significant difference in the impact of rainfall and temperature on oil palm yield. This signifies that rainfall has a significant impact on oil palm yield (FFB) compared to temperature.

In this study, the effects of music therapy on anxiety for patients undergoing regional anaesthesia in an operating room was succinctly investigated. This investigation was largely based on the adapted Hospital Anxiety and Depression Score (HADS) and Spielberger State-Trait Anxiety Inventory (STAI-S), of patients undergoing regional anaesthesia in an operating room. A randomized control trial was performed on 90 patients due for surgery. The selected patients for regional anaesthesia were allocated to either the music therapy group who listened to music using headphones for the entire surgery or the no-treatment control group. Based on the findings, it has been conclusively demonstrated that music can decrease the patient's anxiety level. According to the socio-demographic evaluation, elderly patients have the highest stress hormones levels when compared to young patients. Although elderly patients are more likely to choose religious songs to help them relax, cortisol analysis revealed an increase in cortisol levels among the elderly compared with younger patients. As a result, music is especially important to be delivered to elderly patients. Nonetheless, there is no restriction against administering music to elderly patients because evidence from the Hospital Anxiety and Depression Score (HADS) and State-Trait Anxiety Inventory (STAI-S) has shown that music helps to shift their attention away from pain and complications and makes them feel tranquil. Similarly, the HADS and modified Spielberger STAI (STAI-S) analyses demonstrate a substantial outcome for both groups, with respondents responding positively. The study found that listening to music during regional anaesthesia might help people feel less worried.

In the realm of smart manufacturing, equipment plays a pivotal role, impacting the efficiency and quality of production. Ensuring equipment availability and optimal performance is crucial, necessitating effective maintenance strategies. This paper addresses the complexities of smart device maintenance, which often involves collaboration between multiple entities like device owners, manufacturers, suppliers, and external maintenance services. To enhance this cooperative maintenance, we propose a novel maintenance system based on permissioned blockchain technology, offering superior security and reliability compared to conventional cloud-based platforms. Our contributions include developing an integrated maintenance system framework for smart manufacturing, which facilitates interactions among diverse stakeholders. Additionally, we have developed a prototype of this maintenance system, serving as a practical model for real-world application. Our research primarily demonstrates the practicality and advantages of using permissioned blockchain for maintenance systems in the manufacturing sector, paving the way for more secure, efficient, and collaborative maintenance practices.

Over the years, scarcity of fresh potable water has increased the demand for clean water. Meanwhile, with the advent of nanotechnology, the use of nanomaterials for photocatalytic degradation of pollutants in wastewaters has increased. Herein, a new type of nanohybrids of La and Mn co-doped bismuth ferrite (BiFeO₃) nanoparticles embedded into transition metal carbide sheets (MXene) were prepared by a low-cost double solvent sol-gel method, and investigated for their photocatalytic activity. The photoluminescence results showed that pure BFO has highest electron hole recombination rate as compared to all the co-doped BFO/MXene nanohybrids. The larger surface area and higher electron-hole pair generation rate provides suitable environment for fast photo-degradation of organic molecules. The band gap of the prepared nanohybrids was tuned to 1.96 eV having largest BiFeO₃ surface area (147 m²g⁻¹) reported till date. Moreover, the BLFO/MXene and BLFMO-5/Mxene degraded the 92% organic pollutant from water in dark and remaining in light spectrum as compare to undoped BFO/Mxene due to enhancement of the surface area and electron-hole recombination rate upon doping. Therefore, these synthesized nanohybrids could be a promising candidate for photocatalytic applications in future.

Heavy metals pollution in the Straits of Malacca warrants the development of rapid, simple and sensitive assays. Enzyme-based assays are excellent preliminary screening tool with near real-time potential. The heavy-metal assay based on the protease ficin was optimized for mercury detection using Response Surface Methodology. The inhibitive assay is based on ficin action on the substrate casein and residual casein is determined using the Coomassie dye-binding assay. Heavy metals strongly inhibit the hydrolysis. A Central Composite Design (CCD) was utilized to optimize detection. The results show a marked improvement for the concentration causing 50% inhibition (IC50) for mercury, silver and copper. Compared to One-factor-at-a-time (OFAT) optimization, RSM gave an improvement of IC50 from 0.060 (95% CI, 0.0300.080) to 0.017 (95% CI, 0.0160.019), from 0.098 (95% CI, 0.0770.127) to 0.028 (95% CI, 0.0220.037) and from 0.040 (95% CI, 0.035.045) to 0.023 (95% CI, 0.0200.027), for mercury, silver and copper, respectively. A near real-time monitoring of mercury concentration in the Straits of Malacca at one location in Port Klang was carried out over a 4-h interval for a total of 24 h and validated by instrumental analysis with the result revealing an absence of mercury pollution in the sampling site.

Due to the substantial growth of internet users and its spontaneous access via electronic devices, the amount of electronic contents is growing enormously in recent years through instant messaging, social networking posts, blogs, online portals, and other digital platforms. Unfortunately, the misapplication of technologies has boosted with this rapid growth of online content which leads to the rise in suspicious activities. People misuse the web media to disseminate malicious activity, perform the illegal movement, abuse other people, and publicize suspicious contents on the web. The suspicious contents usually available in the form of text, audio or video, whereas text contents have been used in most of the cases to perform suspicious activities. Thus, one of the most challenging issues for NLP researchers is to develop a system that can identify suspicious text efficiently from the specific contents. In this paper, a Machine Learning (ML)-based classification model is proposed (hereafter called STD) to classify Bengali text into non-suspicious and suspicious categories based on its original contents. A set of ML classifiers with various features has been used on our developed corpus, consisting of 7000 Bengali text documents where 5600 documents used for training and 1400 documents used for testing. The performance of the proposed system is compared with the human baseline and existing ML techniques. The SGD classifier `tf-idf’ with the combination of unigram and bigram features are used to achieve the highest accuracy of 84.57%.

Recently, many authors have been interested to introduce fuzzy implications over t-norms and t-conorms. In this paper, we introduce (S,N) and residuum fuzzy implication for Dubois t-norm and Hamacher's t-norm. Also, new concepts so-called (T,N) and residual fuzzy co-implication in dual Heyting Algebra are investigated. Some examples as well as application are discussed as well.

Polycystic ovary syndrome (PCOS) is a common endocrine disorder in women, characterized by fluid-filled sacs in the ovaries and various symptoms including high androgen levels, endometrial irregularities, and cysts. While the cause of PCOS is unknown, it has been linked to genetic, endocrine, and metabolic factors, and there are several treatment options, including lifestyle modifications, medications, and surgery. Natural products, such as medicinal plants and fruits, are being explored as potential treatments for PCOS due to their bioactive compounds with pharmacological effects related to antioxidant, antimicrobial, anticancer, and antidiabetic properties. Some of these compounds improve insulin sensitivity, reduce inflammation, and enhance glucose metabolism, which is beneficial for women with PCOS. This review examined the effects of natural products on PCOS, including their effects on ovarian histological changes, blood glucose, sex hormones, and lipid profile, based on animal and human studies. This study suggests that the use of natural products as complementary medicine can be a promising resource for the development of effective therapeutics for PCOS, but that further research is needed to fully understand their benefits

Crop digital twin is redefining traditional farming practices, offering unprecedented opportunities for real-time monitoring, predictive and simulation analysis, and optimization. This research embarks on an exploration of the synergy between precision agriculture, crop modeling, and regression algorithms to create a digital twin for augmenting farmers the concentration and composition prediction-based crop nutrient recovery. This captures the holistic representation of crop characteristics, considering the intricate relationships between environmental factors, nutrient concentrations, and crop compositions. However, the complexity arising from diverse soil and environmental conditions makes nutrient content analysis expensive and time-consuming. This paper presents the result of a predictive digital twin case study that employs six regression algorithms namely Elastic Net, Polynomial, Stepwise, Ridge, Lasso, and Linear Regression to predict rice nutrient content efficiently, particularly considering the coexistence and composition of multiple nutrients. Our research findings highlight the superiority of the Polynomial Regression model in predicting nutrient content, with a specific focus on accurate nitrogen percentage prediction. This insight can be used for nutrient recovery intervention by knowing the precise amount of nutrient to be added into the crop medium. The adoption of the Polynomial Regression model offers a valuable tool for nutrient management practices in the crop digital twin, potentially resulting in higher-quality rice production and a reduced environmental impact. The proposed method can be replicable in other low-resourced crop digital twin system.

This study aims to formulate binary cementitious systems containing silica fume (SF) and micro quartz (MQ) to improve cementitious concrete's durability and mechanical properties. In this investigation, we examined the effects of different essential variables, such as the level of SF and MQ replacement and the ratio of the water-binder (w/b). In this study, the w/b ratios were 0.25, 0.3, 0.35, and 0.4. Replacement levels for SF were 8, 10, and 12%, while replacement levels for MQ were 5, 8, 10, 15, 25, and 35%. The porosity and permeability decreased with an increase in replacement levels, regardless of the type of fine material used or the amount of replacement. Meanwhile, the strength increased markedly with SF replacement, reaching its maximum MQ of 25% at the SF level. The strength of the SF mixing was the highest in all mixes, and it remained the highest until 15% of MQ was replaced. The ultrafine size of MQ particles contributes to the improvement of compressive strength, porosity, and permeability in a similar way to SF particles, despite their high crystalline structure. Furthermore, in this study, analysis of variance (ANOVA) was employed to verify the influence of each variable on the studied response.

The rural road landscape is crucial in forming rural areas' landscape character (LC). As a platform for portraying the rural landscape, the rural roads demonstrate the area's unique natural and cultural characteristics to the visitors. However, with the continuous development of rural areas, the rural LC has been severely impacted, thus impacting visitors' visual experience. In order to preserve and protect the rural landscape, this study aims to assess the visual quality of rural road landscapes based on public preference and heatmap analysis. The results indicated that most of the participants had a higher level of preference for rural landscapes with open horizontal views represented by agricultural areas such as paddy fields. It was also found that different paddy field characters based on their planting stages can also positively affect the visual quality of rural road landscapes. The study also revealed that rural LCs with roadside settlements, commercial structures, mixed agricultural crops, and vegetation received low preference ratings. These characters negatively impact the visual quality of the rural road landscape. These findings provide significant insight for planners and decision-makers regarding protecting and preserving the essential rural road landscapes for the rural tourism experience.

The fractional Hilbert transform, a generalization of the Hilbert transform, has been extensively studied in the literature because of its extensive use in optics, engineering, and signal processing. In the present work, we aimed to expand the fractional Hilbert transform to a space of generalized functions known as Boehmians. We introduce a new fractional convolution operator for the fractional Hilbert transform to prove a convolution theorem similar to the classical Hilbert transform and also to extend the fractional Hilbert transform to Boehmians. We also construct a suitable Boehmian space on which the fractional Hilbert transform exists. Further, we investigate convergence of the fractional Hilbert transform for the class of Boehmians and discuss the continuity of the extended fractional Hilbert transform.

Ag/TiO₂ thin films were prepared using the sol-gel spin coating method. The microstructural growth behaviors of the prepared Ag/TiO2 thin films were elucidated using real-time synchrotron radiation imaging, its structure determined using grazing incidence X-ray diffraction (GIXRD), its morphology imaged using the field emission scanning electron microscopy (FESEM), and its surface topography examined using the atomic force microscope (AFM) in contact mode. Cubical white spots were detected, identified as Ag, while the TiO₂ thin film resembles a porous ring-like structure with each ring coalescing and forming channels. Junction growth is directly proportional with time under continuous heating conditions (annealing), and its growth orientations and patterns were seemingly random.

The new emergence and re-emergence of arbovirus infections vectored by Aedes mosquitoes have been spread across Southeast Asia, Central Africa, United States, tropical Oceania and become a major of public health concerns. These arbovirus diseases found to have a similar vector, symptoms of the diseases and environments. The situation has become complicated without any specific vaccine or treatment for the diseases. As far as we concern, vector control is the best defense with many challenges, a scattered breeding site and biological behavioral sometimes, more difficult to control. Herein, we present a review of studies on current techniques proposed to combat arbovirus infections vectored by Aedes mosquitoes. A crucial gap in a vector control program is the inability to eliminate and destroy the cryptic breeding site by using conventional control methods. The idea and proper concept of using mosquitoes to bring insecticide to their oviposition site had been getting more interest in people to explore. Autodissemination is a self-delivery technique by manipulating the behavior of mosquitoes, carrying the insecticide and disseminate to cryptic breeding sites. This technique has shown a promising result in some countries and can be considered as additional tools in a vector control program

Gender recognition is trivial for physiotherapist, but it is considered a challenge for computers. The electromyography (EMG) and heart rate variability (HRV) were utilized in this work for gender recognition during the stepping exercise using a stepper. The relevant features were extracted and selected. The selected features were then fused to automatically predict gender recognition. However, the feature selection for gender classification became a challenge to ensure better accuracy. Thus, in this paper, a feature selection approach based on both the performance and the diversity between the two features from the rank-score characteristic (RSC) function in a combinatorial fusion approach (CFA) was employed. Then, the features from the selected feature sets were fused using a CFA. The results were then compared with other fusion techniques such as naive bayes (NB), decision tree (J48), k-nearest neighbor (KNN) and support vector machine (SMO). Besides, the results were also compared with previous researches in gender recognition. The experimental results showed that the CFA was efficient for feature selection. The fusion method was also able to improve the accuracy of the gender recognition rate. The CFA provides much better gender classification results which is 94.51% compared to Nazarloo's work (90.34%) and other classifiers.

Presently, nano-crystallization is widely accepted for increasing the solubility and biological barrier permeability of poorly soluble drugs. It improves the bioavailability of therapeutic agents, increasing the effectiveness for treating diseased conditions, and could be safely administered by oral, parenteral, or transdermal routes. Drug nanocrystals are drug particles coated with a thin polymer layer to enhance their stability and could be decorated with ligands for active targeting. In addition, nanocrystals, due to their morphological properties, improve cell internalization. Therefore, passive targeting by high cellular uptake and retention in the mononuclear phagocyte system (MPS) may be expected. Drug nanocrystals are formulated by either top-down or bottom-up methods and could be scaled up for industrial manufacturing. In the past few decades, nanocrystal formulation has been increasingly studied to overcome the limitations of BCS Class II and IV chemotherapeutic agents. The study of cytotoxic effects of drug formulation on cell lines gives an insight for estimating its in-vivo biodistribution. This review highlights the role of morphology, stabilizer, and ligand conjugation on drug targeting and cellular uptake in cancer cells, as well as a brief discussion on nanocrystal production.

This study aimed to characterize the antioxidant, mechanical and physical properties of chicken skin gelatin/CMC/Centella asiatica blended film. The influence of Centella asiatica at 0.3% and 0.7% on antioxidant activities; mechanical properties and physical properties of chicken skin gelatin/CMC/Centella asiatica film were investigated. Characterization of the blended films with 0.7% Centella asiatica extract shows higher antioxidant activities with a total phenolic content of 0.36 mg/g of GAE, DPPH of 89.26%, and reducing power of 0.80 nm compared to 0.3% Centella asiatica extract. The addition of 0.3% of Centella extract provide higher value in tensile strength (5.0 × 10⁻² MPa), elongation at break (281%), melting point (131.31 °C), transparency (0.86) but lower UV-light penetration. While the addition of 0.7% Centella extract contribute to higher value in WVP (1.13 × 10⁻⁴ g m⁻¹s⁻¹Pa⁻¹) and puncture test (0.06 N). There are no significant differences between functional groups obtained from this blended film as evaluated by FTIR analysis (p > 0.05). Furthermore, XRD analysis showed the addition of extract decrease the crystallinity of film. In conclusion, the incorporation of Centella asiatica extracts on film greatly increased antioxidant levels and improved some of the mechanical and physical properties of the film blends.

Phage, which is often used therapeutically, has begun to receive interest as an alternative to antibiotic growth promoters (AGPs) to enhance chicken growth. Another option that has been extensively studied as a growth promoter in chicken is probiotics. However, there are no studies using phages and probiotics as prospective feed additives for broiler chickens. Therefore, this study demonstrated the effects of phage cocktail, probiotics and their combinations on growth performance and gut microbiota of broiler chickens. A total of 288 one-day-old male Cobb 500 broilers were randomly allotted to 1 of 6 treatments in a completely randomised design. The treatments were: (i) C (basal diet (BD) only), (ii) 1ɸ (BD + 0.1% phage cocktail), (iii) 2ɸ (BD + 0.2% phage cocktail), (iv) P (BD + 0.1% probiotic), (v) 1ɸP (BD + 0.1% phage cocktail + 0.1% probiotic), (vi) 2ɸP (BD + 0.2% phage cocktail + 0.1% probiotic). The 1ɸP treatment had significantly (P < 0.05) better BW (35 d), BWG (22 – 35 d, 1 – 35d), and FCR (1-21 d. 22-35 d, 1-35 d) compared to C. Unique gut microbiota diversity was also found between the ɸP (1ɸP and 2ɸP) and non-ɸP groups (C, 1ɸ, 2ɸ and P) in ilea, particularly in the 35 d chickens. Microorganisms associated with short-chain fatty acid (SCFA) producers were significantly (P <0.05) present in the ɸP group than in the non- ɸP group. The carbohydrate and amino acid metabolism predicted genes were significantly upregulated in ɸP groups compared to non- ɸP groups. These genes were involved in the digestion and absorption of nutrients as well as the production of energy. Our findings showed that 1ɸP treatment could be a potential alternative to AGPs for poultry where growth performance was enhanced, and gut microbiota was positively modulated.

Since the first case of 2019 novel coronavirus disease (COVID-19) detected on Jan 30, 2020, in India, the number of cases rapidly increased to 3819 cases including 106 deaths as of 5 April 2020. Taking this into account, in the present work, we are studying a Bats-Hosts-Reservoir-People transmission fractional-order COVID-19 model for simulating the potential transmission with the thought of individual social response and control measures by the government. The real data available about infectious cases from $14^{th}$ March to $26^{th}$ March 2020 is analysed and accordingly various parameters of the model are estimated or fitted. The Picard successive approximation technique and Banach's fixed point theory have been used for verification of the existence and stability criteria of the model. Numerical computations are done utilizing the iterative Laplace transform method. In the end, we illustrate the obtained results graphically. The purpose of this study is to estimate the effectiveness of preventive measures, predicting future outbreaks and potential control strategies using the mathematical model.

Genetic disorders are preeminent determinants of infant mortality. The inherited pediatric-onset genetic disorders have consequential stress on child growth and development: several congenital, complex and rare disorders with indistinguishable clinical symptoms where diagnosis always remains a challenging task. Traditional diagnosis methods include biochemical tests followed by chromosomal microarray and sequencing of a single gene or panel of genes. These methods had several limitations, but with the advent of whole-exome sequencing (WES), genetic testing has become cost-effective and transformative. Exome sequencing has been known for its effectiveness, which appropriately elucidates and distinguishes the heterogeneous disorders to avoid misdiagnosis and decode the underlying genetic alterations. WES has led to discovering genes and genomic variants in a broad spectrum of diseases, including autism, epilepsy, congenital heart diseases, neurodevelopmental diseases, cancer, nephrotic disorders, neural tube defects and fetal structural anomalies. WES is significant in producing immense genomic biomarkers that can be made as appropriate pharmacogenomic targets for drug therapy. In this article, we analyze the recent exploration of WES technology to revolutionize not only the process of genetic variation and disease detection but also the convention of preventative and targeted drug discovery.

Microalgae are known as a rich source of bioactive compounds which exhibit different biological activities. Increased demand for sustainable biomass for production of important bioactive components with various potential especially therapeutic applications has resulted in noticeable interest in algae. Utilization of microalgae in multiple scopes has been growing in various industries ranging from harnessing renewable energy to exploitation of high-value products. The focuses of this review are on the isolation of bioactive compounds from microalgae regarding different metabolites which are currently used and new possible applications of the compounds in industries and future prospects. Moreover, this work discusses the advantage, potential new beneficial strains, applications, limitations, research gaps and future prospect of microalgae in industry.

While there has been a tremendous decline in malaria disease burden in the remote parts of the Malaysia, little is known about malaria incidence in its urban localities. This study aimed to analyse trends of malaria cases in urban Kuala Lumpur, Malaysia. All suspected cases presented to a university hospital in Kuala Lumpur from January 2005 to December 2020 were examined by microscopy. Infection status was analysed using descriptive statistics and curve estimation analysis. Of 3105 blood films examined, 92 (3%) were microscopically confirmed malaria cases. Plasmodium vivax infections accounted for the majority (36.9%) of all malaria cases. Nearly half (47.8%) of cases were found among foreign cases (P&lt;0.001). The majority of foreign cases were males (86.4%) and came from Southeast Asian countries (65.9%). Curve estimation analysis showed significant decreases of malaria cases due to P. vivax (R2 = 0.598; P&lt;0.001) and Plasmodium falciparum (R2 = 0.0259, P = 0.029), but increase for Plasmodium knowlesi (R2 = 0.325, P = 0.021) during the 16 years. This study revealed that malaria incidence in urban Kuala Lumpur is low and has remained stable since 2005. However, P. knowlesi played a significant role in the increase of overall malaria in the area, highlighting the importance of continued vigilance and improved surveillance.

Assessment of stigma among cancer patients is of utmost importance as stigma may lead to various psychological sequelae and lower quality of life. This study aimed to translate the English version of the Shame and Stigma Scale (SSS) into Malay and validate the Malay version of the SSS (SSS-M) among cancer patients in Malaysia. Initially, concurrent translation and back translation of the SSS-M was performed, and face and content validity were assessed. Then, the SSS-M was administered to a total of 234 patients of mixed types of cancer to assess its reliability (internal consistency and test-retest reliability), construct validity (convergent and discriminant validity), exploratory factor analysis (EFA) and confirmatory factor analysis (CFA). The SSS-M total score registered good internal consistency (Cronbach’s α of 0.886) and test-retest reliability (intraclass correlation coefficient of 0.846, p < 0.001). EFA and CFA confirmed that the SSS-M consisted of 20 items in 5 domains. Its convergent and discriminant validity were achieved. Hence, the SSS-M demonstrated good psychometric properties and is available for use to assess stigma among cancer patients in Malaysia.

A Zn(II) perchlorate complex has been prepared and characterized by single X-ray crystallography, nuclear magnetic resonance spectroscopy, thermogravimetric analysis, infrared spectroscopy, elemental analysis, and UV-vis spectroscopy. The complex crystallizes in the monoclinic space group P21/c (Z = 4) with a pentacoordinated zinc center. Interestingly, the Zn complex was found be to a potential fluorophore that could sense acetone and other ketones with high selectivity and sensitivity.

There are many pollution and environment problem in the human ecosystem. There are different methods are used to removal of sulfur from sour gases for example Basic Claus process and Modified Claus process . There are different chemical software are used for simulation and optimization of Claus process for example Aspen Plus and Chemcad ECT. The Gibbs free energy method is introduced and model of Claus process. There are new parameter are introduced in reaction furnace to reduce the error from 33% to 7 %. The waste heat boiler is installed at the reaction furnace in which high pressure stream is produced and study the decomposition the hydrogen sulphide. The new rate of reaction is introduced of the enhancement of H2 production in chemical process. The simulation of reaction furnace in Aspen plus software is the maximum utilization of process. Due to suitable operating condition of reaction furnace is caused the maximum destruction of ammonia gas in the reactor. When we are increasing the oxygen concentration and temperature of feed is causing decreasing the ammonia production in reaction furnace. It is below than acceptance value of ammonia is 150 ppm in the reaction furnace. The presence of oxygen components, Sulfur oxide, hydroxide components are effect on decreasing the amount of ammonia in furnace and temperature is about at 1350⁰C. It is noted that when the production of sulfur recovery is decrease in Claus process and the production of carbon monoxide is increase in the thermal section at the existence. Now we are work on parametric studies of furnace that could be causes the production of ammonia destruction and CO emission in the Claus process. Due to optimize the reaction furnace parameter are help to get large of sulfur production, ammonia gas destruction, increased the catalyst life and decreased of dangerous gases.

Biogenic emission can have significant impact on atmospheric chemistry. Isoprene (C5H8) is known as the most predominant volatile organic compound and its emission is highly dependent on temperature and light (solar radiation). This study aims to investigate future changes of isoprene emission under climate change scenario. The Southeast Asia (SEA) region is home to 15% of the world’s tropical forest, and the biogenic emission from this region can have significant effect on the global climate chemistry. Three climate change scenarios (RCP4.5, RCP6.0 and RCP8.5) were used to drive climate change simulation in 2013 (baseline), 2030 (near-future), 2050 (mid-century), 2070 (post-mid) and 2100 (end of century) using the Weather Research Forecasting (WRF v3.9.1) model. The Model Emission of Gases and Aerosol from Nature (MEGAN v2.1) was then used to simulate isoprene fluxes using climate output datasets from the WRF model. This study highlights that the projected mean surface temperature and PAR (photosynthetic active radiation) were higher in July than in January. Towards the end of the century, the overall surface temperature and PAR over the SEA region is expected to increase by 0.9℃ - 2.1℃, and 7.6 W m-2 – 12 W m-2 under all RCPs. The all-time high isoprene emitters are Borneo and Papua Island. Meanwhile, the projected increment of isoprene emission over this region is between 10 – 14%, 15-30% and 29 – 53% for RCP4.5, RCP6.0 and RCP8.5, respectively. Our result concludes that the total isoprene emission was higher during July, consistent with the high surface temperature and PAR. The results also agreed with the hypothesis of high isoprene emission over the region that has oil palm plantation. Thus, challenges in dealing with future emissions of isoprene in SEA are closely tied to future climate policies to limit the warming of the atmosphere over this region and the land-use conversion of palm oil plantations.

Artificial intelligence (AI) techniques have grown rapidly in recent years in the context of computing with smart mobile phones that typically allows the devices to function in an intelligent manner. Popular AI techniques include machine learning and deep learning methods, natural language processing, as well as knowledge representation and expert systems, can be used to make the target mobile applications intelligent and more effective. In this paper, we present a comprehensive view on mobile data science and intelligent apps in terms of concepts and AI-based modeling that can be used to design and develop intelligent mobile applications for the betterment of human life in their diverse day-to-day situation. This study also includes the concepts and insights of various AI-powered intelligent apps in several application domains, ranging from personalized recommendation to healthcare services, including COVID-19 pandemic management in recent days. Finally, we highlight several research issues and future directions relevant to our analysis in the area of mobile data science and intelligent apps. Overall, this paper aims to serve as a reference point and guidelines for the mobile application developers as well as the researchers in this domain, particularly from the technical point of view.

Biofilm-associated proteins (BAPs) are important in the development and resilience of biofilms, which are intricate populations of microbes protected by extracellular matrix. All members of the BAP family are known to possess common characteristics such as high molecular weight and a signal sequence for extracellular secretion. It has been shown that BAPs are directly linked to the pathogenicity of many bacteria. This mini review highlights several potential strategies to target BAPs for drug development.

This chapter is written for the welfare of the society, questioning and enlightening the effects of the increment or decrement in the percentage of quality of air causing pollution due to the rise in the traffic post-lockdown due to COVID-19 in metro cities, specifically in Delhi. In this chapter, we address the question about people's preference in moving in the shared taxis to their workplaces or their reluctance and denial of the idea of moving in the shared vehicle because of the fear of getting infected. The sensitivity of the situation will compel the people to move in a single occupied vehicle (SOV). The rise in the number of vehicles on the roads will result in traffic jams and different kinds of pollution where people battling with the pandemic will inevitably get exposed to other health-related issues. We use a BPR (Bureau of Public Roads) model to combat this issue endangering the environment and public health. We exploit the BPR function to relate average travel time to the estimated number of commuters travelling by car. We collect mode share data from the NITI Ayog, the State Resource Centre and other authentic sources, which gives unique figures of the impact of shared mobility in India and how, in its absence, various sectors will get affected. Using the given data and the BPR, we evaluate increased vehicle volumes on the road if different portions of transit and carpool users switch to single-occupancy vehicles and its effect on multiple other factors. Based on the study of densely populated city, Delhi, we predict that cities with significant transit ridership are at risk for extreme traffic and pollution unless transit systems can resume safe with effective protocols.

Increase demand for palm oil production has indirectly increased waste and pollution. Empty fruit bunch (EFB), which is the major solid waste from this industry, has the potential to be further treated into valuable product. In this study, cellulose will be extracted from EFB through alkali treatment and acid hydrolysis treatment with a different approach and further modified via acetylation and silylation technique. The modified samples are to be utilized to reduce pollution due to palm oil mill effluent (POME) and carbon dioxide (CO2) emission from the industry. The characterization of the extracted and modified cellulose was carried out using attenuated total reflectance-Fourier transform infrared (ATR-FTIR), thermogravimetric analysis (TGA) and scanning electron microscope (SEM). ATR-FTIR analysis revealed that the cellulose was successfully extracted from raw EFB and the cellulose-acetyl, nanocrystalline cellulose (NCC) and cellulose-2 has been successfully modified from the cellulose. TGA analysis shows that both modified cellulose have higher thermal stability compared to raw EFB and extracted cellulose. SEM morphology of the modified cellulose shows a higher surface area due to the wrinkled formation while the wax layer and cuticle pore has been diminished clearly. The modified sample gave a significant performance where cellulose-acetyl absorbed 98.5% of oil compared to unmodified cellulose-1 sample that only absorbed 5% of oil from POME. NCC-AEAPDMS adsorbed physically and chemically 3.5 cm3/g CO2 gas compared to NCC sample, which undergoes only physical adsorption with maximum capacity up to 2.4 cm3/g. Thus, modification can enhanced the performance of cellulose for industrial applications.

Remanufacturing is a way for product recovery initiative and maintaining sufficient production flow to satisfy customer demand through circular economy. Recently, manufacturers have been progressively incorporating remanufacturing processes, making their supply chain vulnerable to disruptions. Among the disruptions that usually occur is the shortage in spare parts supply, which causes unexpected delay in production and possible loss of sales. In the face of potential disruption, it is essential for remanufacturing facilities to manage their supply chains in an optimum manner as to decrease the adverse impact of disruptions to their business. In this study, a two-stage production-inventory system is analysed by developing a cost-minimisation model focusing on the recovery schedule after a disruption occurrence in sourcing spare parts for a remanufacturer’s production cycle. The developed model was solved using the branch and bound algorithm. Through numerical experiments, the results indicate that the optimal recovery schedule and the number of recovery cycles are significantly dependant on disruption time, lost sales and backorder costs. Moreover, a sensitivity analysis shows that the lost sales option seems to be more effective than the backorder option in optimising the system’s overall cost. The proposed model could assist managers in deciding the optimal production strategy while providing interesting managerial insights into vital spare parts recovery issues when disruption strikes.

The recent happenings in the world such as flood and wild forest fire were as a result of climate effect as being envisaged by scientists. It is urgent now to adopt a source of energy that will eliminate this effect on our universe. Solar energy is the major energy means that is abundant which could be utilized. In this review, the prospects of solar energy exploration were studied in Nigeria which include assessments, economic viability and hybrid systems. Findings show higher potential in the North as compared to the Southern region. Additionally, potential of offshore solar energy system was simulated by considering 2002, 2003 and 2004 data sets from Era5-land base. Their monthly mean, seasonal changes and annual mean value were estimated. The algebraic annual solar radiance for 2002, 2003 and 2004 were 34,914.732 kWh/m2, 33,898.316 kWh/m2 and 34,338.324 kWh/m2. Suggestions were made due to the present status of solar energy utilization that will enhance its maximum usage and development. One of these is the establishment of a functioning financial scheme and the database for all renewable energy systems. When all these are put in place, the energy supply will increase, climate effect will be reduced, and the economy will be boosted.

We proposed a so-called Beta Kumaraswamy Burr Type X distribution which gives the extension of the Kumaraswamy-G class of family distribution. Some properties of this proposed model were provided, like: the expansion of densi- ties and quantile function. We considered the Bayes and maximum likelihood methods to estimate the parameters and also simulate the model parameters to validate the methods based on dierent set of true values. Some real data sets were employed to show the usefulness and exibility of the model which serves as generalization to many sub-models in the elds of engineering, medical, survival and reliability analysis.

We proposed a so-called Beta Kumaraswamy Burr Type X distribution which gives the extension of the Kumaraswamy-G class of family distribution. Some properties of this proposed model were provided, like: the expansion of densities and quantile function. We considered the Bayes and maximum likelihood methods to estimate the parameters and also simulate the model parameters to validate the methods based on different set of true values. Some real data sets were employed to show the usefulness and flexibility of the model which serves as generalization to many sub-models in the field of engineering, medical, survival and reliability analysis.

The effect of SARS-CoV-2 pandemic has been subsided significantly following the rapid development of vaccine. However, patients with cancer and immunosuppressed state, who are more prone to mortality and morbidity due to this infection, were excluded from majority of the vaccine trials. Moreover, suggested dose modification for cancer and immunosuppressed patients are often not followed because of lack of awareness or unavailability of vaccination schedule. This review will try to bridge this knowledge gap by summarizing the current suggestions of dose modification of COVID-19 vaccine for patients with cancer and immunosuppression.

Customer satisfaction is the process of reaching a customer's expectations to generate delightful experiences with a product or a brand. Delight involves delivering an unforgettable experience to users by focusing on their requirements, desires, and interests. Delighting Customers is crucial for organizations’ economic growth worldwide, especially in the airline industry. This study aims to determine if safety measures, ticketing policies, and the cost of air travel impact among the airline passengers’ satisfaction post-COVID-19 in Malaysia. A research framework is designed to present an in-depth understanding of the mentioned variables. In this study, a comprehensive survey using online questionnaire was used and 388 valid responses were obtained from airline passengers in Malaysia. Data were analyzed by employing data reduction technique and multivariate data analysis. The results revealed that safety appears to be the most essential aspect of airline customer satisfaction among Malaysians, while cost is perceived as a significant factor. Moreover, as the cost of living rose because of the pandemic, many of the income earners in the lower category are less inclined to take vacations. In a nutshell, the study recommends that airlines implement a conscious practice that contributes to the happiness of passengers, which in turn increases profitability and ensures sustainable growth of the airlines.

Enhancing the management and monitoring of oil and gas processes demands developing precise predictive analytics techniques. Over the past two years, oil and its prediction have advanced significantly using conventional and modern Machine Learning techniques. Several review articles detail the developments in predictive maintenance and technical and non-technical aspects of influencing the uptake of big data. The absence of references for machine learning techniques impacts the effective optimization of predictive analytics in the oil and gas sector. This review paper offers readers thorough information on the latest machine learning methods utilized in this industry's predictive analytical modelling. The review covers forms of Machine Learning techniques used in predictive analytic modelling from 2021 to 2023 (91 articles). It provides an overview of the details of the papers that were reviewed, comprising of the model’s categories, the data's temporality, field, and name, the dataset's type, predictive analytics (classification or clustering or prediction), the models' input and output parameters, performance metrics, optimal model, and benefits and its drawbacks. Additionally, suggestions for future research directions are provided to raise the potential of the associated knowledge and increase the accuracy of oil and gas predictive analytics models.

Human-Robot Interaction (HRI) for collaborative robots has become an active research topic recently. Collaborative robots assist the human workers in their tasks and improve their efficiency. But the worker should also feel safe and comfortable while interacting with the robot. In this paper, we propose a human-following motion planning and control scheme for a collaborative robot which supplies the necessary parts and tools to a worker in an assembly process in a factory. In our proposed scheme, a 3-D sensing system is employed to measure the skeletal data of the worker. At each sampling time of the sensing system, an optimal delivery position is estimated using the real-time worker data. At the same time, the future positions of the worker are predicted as probabilistic distributions. A Model Predictive Control (MPC) based trajectory planner is used to calculate a robot trajectory that supplies the required parts and tools to the worker and follows the predicted future positions of the worker. We have installed our proposed scheme in a collaborative robot system with a 2-DOF planar manipulator. Experimental results show that the proposed scheme enables the robot to provide anytime assistance to a worker who is moving around in the workspace while ensuring the safety and comfort of the worker.