We present the design and overall development of an eight degrees of freedom (DOF) based Bioinspired Quadruped Robot (BiQR). The robot is designed with a skeleton made of cedar wood. The wooden skeleton is based on exploring the potential of cedar wood to be a choice for legged robots’ design. With a total weight of 1.19 kg, the robot uses eight servo motors that run the position control. Relying on the inverse kinematics, the control design enables the robot to perform the walk gait-based locomotion in a controlled environment. The robot has two main aspects: 1) the initial wooden skeleton development of the robot showing it to be an acceptable choice for robot design, 2) the robot’s applicability as a low-cost legged platform to test the locomotion in a laboratory or a classroom setting.

The aim of this article is introduced the concept of double framed T-soft fuzzy set (DFT-soft fuzzy set) which is the combination of soft set and fuzzy set. We also defined the notions and apply this concept in BCK/BCI-algebras. By using example, we also discussed the concept of double framed T-soft fuzzy algebra (DFT-soft fuzzy algebra) and double framed B-soft fuzzy algebra (DFB-soft fuzzy algebra) and also investigated their properties. Each double framed T-soft fuzzy algebra is double framed B-soft fuzzy algebra but by using example, we proved that converse may or may not be possible.

In this study, we first discover some new concept coordinated UD-convex mappings with fuzzy-number values. After that, we look into Hermite-Hadamard type inequalities via fuzzy-number-valued coordinated UD-convex fuzzy-number-valued mapping (coordinated UD-convex FNVM). In the case of coordinated UD-convex FNVM, novel conclusions are derived by making particular decisions in recently proven inequalities. Additionally, it is demonstrated that the recently discovered inequalities are expansions of comparable findings in the literature. It is important to note that the main outcomes are validated by nontrivial examples.

This study addresses the central question that how can a precise measurement of the gluon Parton Distribution Function (PDF) be attained, thereby enhancing our understanding of the intricate quark-gluon composition within nucleons? Through a dual approach involving Quantum Chromodynamics (QCD) and high-energy particle collisions, the research combines computational tools and experimental techniques, focusing on protons and neutrons. Scattering experiments and advanced detectors are utilized to probe nucleon structure. Theoretical frameworks like QCD equations and the Momentum Sum Rule investigate Parton Distribution Functions at specific momentum fractions and energy scales. The primary goal is to achieve an accurate measurement of the gluon PDF, crucial for unraveling strong force complexities and internal nucleon dynamics. The study's theoretical plots and equations illustrate hypothetical behaviors of gluon distribution, quark distribution, and splitting functions, contributing to a deeper understanding of fundamental particles.

The consumption and sale of fresh-cut products and salads have been growing tremendously in the present era. Therefore, the microbial safety of such products is of great concern. In the current study, a survey of general microbiological safety of fresh-cut produce and salads at quick-service restaurants (QSR) was undertaken across the Kingdom of Saudi Arabia. These findings were compared with microbiological criteria for foodstuffs by Saudi standards, metrology, and quality organization SASO-GSO-1016. Of the 82 samples of fresh-cut produce, 7% of samples were found to be unsatisfactory or beyond the acceptable limits. TPC count was unsatisfactory at 22%, coliform at 48%, and Staphylococcus aureus at 4%. For 108 samples for fresh salads, 11% of samples were found to be unsatisfactory or beyond the acceptable limits,13%, 27%, 4%, and 27% of samples showed an unsatisfactory range of TPC, coliforms, S. aureus, and Escherichia coli, respectively. The fresh-cut produce and salads were microbiologically safe in the central region compared to the eastern region followed by the western region. The relatively higher count was found in green pepper, mixed vegetables, and lettuce followed by fresh-cut onions and coleslaw salads. No Salmonella was detected in both fresh-cut produce and salads. The restaurants should be more stringent in their processing to ensure the consumer safety. Washing and sanitization of produce is the only way to reduce the diffusion of food borne pathogens.

Keywords: Electrical power systems, Support vector machines, Random Forest, Machine learning, Wavelet transform, Transmission lines fault, Electrical power quality, Short circuit, Classification of faults, Localization of faults, Decision trees, Ensemble learning, K-nearest neighbors.

With the advent of digitization, the integration of advanced technologies in operations and projects across all sectors is in progress. Accordingly, efforts are being made to utilize cutting-edge technologies to improve the circularity of the built environment. This study aimed to review the existing applications and limitations of building information modeling (BIM) tools for circular economy (CE) implementation from this perspective. A literature review was conducted to provide an overview of the use of BIM tools for conducting life cycle assessments, energy analysis, waste management, and formulation of material passports for buildings. It was found that BIM tools, which are available across all life cycle phases of building, have a great potential to improve the circularity of the sector. The overview provided on the use of various BIM tools may help stakeholders of the built environment understand the role of BIM for CE adoption in the sector.

In recent years, e-commerce platforms have replaced conventional marketplaces. People are rapidly adopting internet shopping due to the convenience of making purchases from the comfort of their homes. Online review sites allow customers to share their thoughts on products and services. Customers and businesses are increasingly relying on online reviews to assess and improve the quality of products. Existing literature uses Natural language processing (NLP) to analyze customer reviews for different applications. Due to the growing importance of NLP for online customer reviews, this study attempts to provide a taxonomy of NLP applications based on existing literature. This study also examined emerging methods, data sources, and research challenges by reviewing 154 publications from 2013 to 2023 that explore state-of-the-art approaches for diverse applications. Based on existing research, the taxonomy of applications divides literature into five categories: sentiment analysis, review analysis, customer feedback and satisfaction, user profiling, and marketing and reputation management. It is interesting to note that the majority of existing research relies on Amazon user reviews. Additionally, recent research has encouraged the use of advanced techniques like Bidirectional Encoder Representations from Transformers (BERT), Long Short-Term Memory (LSTM), and ensemble classifiers. The rising number of articles published each year indicates increasing interest of researchers and continued growth. This survey additionally addresses open issues, providing future directions in online customer review analysis.

The term Air Quality (AQ) pertains to the standard of air, which has a direct impact on the health and well-being of individuals. It is crucial to maintain high Air Quality (AQ), for better health and productivity. Though most of people spend more time indoors nowadays, it is not to be overlooked that the pollutant concentration in indoor air is directly linked to the outdoor air quality. Due to the changes in occupancy patterns, outdated maintenance of ventilation systems, and structural flaws in buildings, the indoor air is significantly polluted; pollutants emitted outdoors enter indoor air through open windows, ventilation systems and infiltration. In this paper, we have proposed a new technique, DTMCPM (discrete-time Markov chain (DTMC) model for the analysis and forecasting of AQ, using the power method). Specialized sensors and equipment to measure different pollutants, such as particulate matter, ozone, nitrogen dioxide, sulfur dioxide, benzene and toluene, are used to collect data by the Institute of Pakistan Air Quality Monitor in various cities; the data is converted to US EPA standard for all pollutant species. This data is used to calculate the transition matrix, steady-state values and mean return rate for the analysis of IAQ. The calculated and actual return rates have been compared and the proposed model is found to have a low average prediction error of 2.356%.

For a considerable length of time synthetic composts are utilized to satisfy the dirt necessity of supplements and yield, however huge measure of these substance manures are hazardous for condition, advantageous microorganisms, creatures, and people also. In this way, natural inviting and savvy biofertilizers are utilized. Biofertilizer are the substances which contain microorganisms those microorganisms might be growths, microscopic organisms, and protozoa which have capacity to build ripeness of soil by Nitrogen obsession, Phosphorous solubilization, and Iron sequestration. These cycles convert insoluble type of supplements into solvent structure and make it accessible to the foundations of plant which effectively take them up and use them. There are assortment of the yields whose profitability can be expanded by applying biofertilizer, for example, rice, oat, and other grain crops. In this audit we experience the method of utilization of biofertilizers, and how the assistance the plants and in which they help.

The world is looking towards organizations for social responsibility to contribute to a sustainable environment. Employees’ organizational citizenship behavior for the environment (OCBE) is a voluntary environmental-oriented behavior that is important for organizations’ environmental performance. Based on social learning theory, the study examined the effects of responsible leadership in connection with OCBE by using a sample of 520 employees of manufacturing and service sector including engine manufacturing, petroleum plants banking and insurance sector organizations of China. Further, the role of psychological ownership and employee environmental commitment were used as mediators and moderators simultaneously. The direct, mediation, and moderation model results exposed a positive relationship between responsible leadership and OCBE via employee psychological ownership and employee environmental commitment. The study also revealed that the indirect effect is stronger when employees hold higher employee environmental commitment. The theoretical and practical implications for environmental sustainability in respect of organizations as well as future research directions are discussed.

The fourth industrial revolution has resulted in the digitalization of projects and operations across all sectors. Accordingly, efforts are being made to utilize advanced technologies to improve the energy efficiency of the building sector. This study has reviewed the current application and limitations of cutting-edge technologies in this regard. An overview of the use of the Internet of Things (IoT), artificial intelligence (AI), digital twin (DT), and building information modeling (BIM) for energy efficiency of buildings has been provided. It has been found that the use of Industry 4.0 technologies, during the construction and operational phase of buildings, has a great potential to reduce energy consumption and emissions of the sector. This study may help stakeholders of the built environment to understand the role of industry 4.0 tools for energy efficiency of the sector.

Hyperspectral imaging provides vital information about the objects and elements present inside the image. That’s why they are very useful in satellite imagery as well as image forensics. Hyperspectral document analysis (HSDI) can be used for document authentication using ink analysis which can provide sufficient information about the composition and type of ink. In this project, we have implemented HSDI based ink classification technique using Principle Component Analysis for dimensionality reduction and K-means clustering for ink classification. This is unsupervised learning approach and it is very simple and efficient in order to classify limited number of bands. We have used this technique to classify 33 different bands of ink.

Crowd density estimation is an important task for crowd monitoring. Many efforts have been done to automate the process of estimating crowd density from images and videos. Despite series of efforts, it remains a challenging task. In this paper, we proposes a new texture feature-based approach for the estimation of crowd density based on Completed Local Binary Pattern (CLBP). We first divide the image into blocks and then re-divide the blocks into cells. For each cell, we compute CLBP and then concatenate them to describe the texture of the corresponding block. We then train a multi-class Support Vector Machine (SVM) classifier, which classifies each block of image into one of four categories, i.e. Very Low, Low, Medium, and High. We evaluate our technique on the PETS 2009 dataset, and from the experiments, we show to achieve 95% accuracy for the proposed descriptor. We also compare other state-of-the-art texture descriptors and from the experimental results, we show that our proposed method outperforms other state-of-the-art methods.

We proposed a deep learning based chemometric data analysis technique. We trained L2 regularized sparse autoencoder end-to-end for reducing the size of the feature vector to handle the classic problem of curse of dimensionality in chemometric data analysis. We introduce a novel technique of automatic selection of nodes inside hidden layer of an autoencoder through pareto optimization. Moreover, linear regression, ϵ-SVR , and Gaussian process regressor are applied on the reduced size feature vector for the regression. We evaluated our technique on orange juice and wine dataset and results are compared against state-of-the-art methods. Quantitative results are shown on Normalized Mean Square Error (NMSE) and the results show considerable improvement in the state-of- the-art.

Structural design optimization (SDO) plays a pivotal role in enhancing various aspects of construction projects, including design quality, cost-efficiency, safety, and structural reliability. Recent endeavors in academia and industry have sought to harness the potential of Building Information Modeling (BIM) and optimization algorithms to optimize SDO and improve design outcomes. This review paper aims to synthesize these efforts, shedding light on how SDO contributes to project coordination. Furthermore, the integration of sustainability considerations and the application of innovative technologies and optimization algorithms in SDO necessitate more interactive early-stage collaboration among project stakeholders. This study offers a comprehensive exploration of contemporary research in integrated SDO employing BIM and optimization algorithms. It commences with an exploratory investigation, employing both qualitative and quantitative analysis techniques following the PRISMA systematic review methodology. Subsequently, an open-ended opinion survey was conducted among construction industry professionals in Europe. This survey yields valuable insights into the coordination challenges and potential solutions arising from technological shifts and interoperability concerns associated with widespread SDO implementation. These preliminary steps of systematic review and industry survey furnish a robust knowledge foundation, enabling the proposal of an intelligent framework for automating early-stage sustainable structural design optimization (ESSDO) within the construction sector. The framework ESSDO addresses the challenges of fragmented collaboration between architects and structural engineers. This proposed framework seamlessly integrates with the BIM platform, i.e., Autodesk Revit for architects. It extracts crucial architectural data and transfers it to the structural design and analysis platform, i.e., Autodesk Robot Structural Analysis (RSA), for structural engineers via the visual programming tool Dynamo. Once the optimization occurs, optimal outcomes are visualized within BIM environments. This visualization elevates interactive collaborations between architects and engineers, facilitating automation throughout the workflow and smoother information exchange.

Cardiac amyloidosis is caused by amyloid fibrils that deposit in the myocardial interstitium, causing restrictive cardiomyopathy and eventually death. The electromechanical, inflammatory, and autonomic changes due to amyloid deposition result in arrhythmias. Atrial fibrillation is by far the most common arrhythmia. Rate control strategy is generally poorly tolerated due to restrictive filling physiology and heart rate dependance, favoring adoption of rhythm control strategy. Anticoagulation for stroke prophylaxis is warranted irrespective of CHA2DS2Vasc score in patients with favorable bleeding profile; data on left appendage closure devices is still insufficient. Ventricular arrhythmias are also not uncommon and the role of implantable cardioverter-defibrillator in cardiac amyloidosis is controversial. There is no evidence of improvement in outcomes when used for primary prevention in these patients. Bradyarrhythmia is most commonly associated with sudden cardiac death in cardiac amyloidosis. Pacemaker implantation can help provide symptomatic relief but does not confer mortality benefit.

Classification of human actions from uni-modal and multi-modal datasets is an ongoing research problem in computer vision. This review is aimed to scope current literature on data-fusion and action-recognition techniques and to identify gaps and future research direction. Success in producing cost-effective and portable vision-based sensors has dramatically increased the number and size of datasets. The rise in number of action recognition datasets intersects with advances in deep-learning architectures and computational support, both of which offer significant research opportunities. Naturally, each action-data modality - such as RGB, depth, skeleton, and infrared - has distinct characteristics; therefore, it is important to exploit the value of each modality for better action recognition. In this article we will focus solely on areas such as data fusion and recognition techniques in the context of vision with a uni-modal and multi-modal perspective. We conclude by discussing research challenges, emerging trends, and possible future research directions.

The study experimentally investigated a novel approach for producing hydrogen from methane cracking in dielectric barrier discharge catalytic plasma reactor using a nanocatalyst. Plasma-catalytic methane (CH4) cracking was undertaken in a dielectric barrier discharge (DBD) catalytic plasma reactor using Ni/MgAl2O4. The Ni/MgAl2O4 was synthesised through co-precipitation followed customised hydrothermal method. The physicochemical properties of the catalyst were examined using X-ray diffraction (XRD), scanning electron microscopy - energy dispersive X-ray spectrometry (SEM-EDX) and thermogravimetric analysis (TGA). The Ni/MgAl2O4 shows a porous structure spinel MgAl2O4 and thermal stability. In the catalytic-plasma methane cracking, the Ni/MgAl2O4 shows 80% of the maximum conversion of CH4 with H2 selectivity 75%. Furthermore, the stability of the catalyst was encouraging 16 hours with CH4 conversion above 75%, and the selectivity of H2 was above 70%. This is attributed to the synergistic effect of the catalyst and plasma. The plasma-catalytic CH4 cracking is a promising technology for the simultaneous H2 and carbon nanotubes (CNTs) production for energy storage applications.

As a traditional Muslim country, the problem of gender discrimination in employment among women in Pakistan is more common. If we let it develop without taking measures, it will seriously restrict the speed and quality of Pakistan’s domestic economic development in the long run. In this study, the author obtained the first-hand information on the employment status of professional women in the Rahim Yar Khan region of Pakistan through questionnaire survey, supplemented by the public data of the Federal Statistical Office of Pakistan, and combined with the existing research results of the predecessors. Sex discrimination in employment of professional women in Pakistan. Through the collection of the data obtained from the questionnaire, the author found that economic factors are one of the main factors that cause local women to encounter gender discrimination in employment. Specifically, it includes the imbalance of labor supply and demand and the pursuit of maximum profits. At the same time, the traditional Muslim culture, women's own literacy and the imperfect legal system in Pakistan are also the key factors that cause female employees in the local area to encounter gender discrimination in employment. Women’s gender discrimination in employment is a universal problem. In any country in the world, gender discrimination may exist as long as women are involved in the work. Based on Pakistan's basic national conditions and relevant professional knowledge, the author provides several suggestions for eliminating the problem of gender discrimination in employment for local female employees in Pakistan. 1) The Pakistani government should further promote the domestic economic growth, increase the number of jobs, and ease the imbalance between the supply and demand of labor. At the same time, encourage self-employment and provide corresponding policy support. A variety of measures are also intended to address local gender discrimination in employment for women. 2) The government's leadership accelerates the transformation of the concept of the whole society. On the one hand, it requires the whole society to correctly understand the social status and social contribution of women, and strives to bring the concept of equality between men and women into the hearts of the people. It is intended to encourage qualified women to go out of the family to participate in social work. At the same time, correctly guide corporate values. Enterprises should not unilaterally pursue the maximization of interests, and should take the initiative to assume social responsibilities. 3) Women should also actively and consciously improve their literacy. Including not only active learning advanced cultural knowledge and professional skills. For the professional skills that have already been mastered, you must study harder and make yourself more and more progressive. At the same time, families should guarantee that girls of the appropriate age receive the education they deserve, so that they can gather their strengths in the workplace in the future.

The present study assessed the effect of abscisic acid (ABA; 25 µM) and/or nitrogen (N; 10 mM) in minimization of salinity (NaCl; 100mM)-impact on growth, photosynthetic efficiency, Rubisco activity, nitrogen and sulfur assimilation, oxidative stress (H₂O₂), lipid peroxidation measured as thiobarbituric acid reactive substances, (TBARS), osmolyte (Proline) content, and the activity of antioxidant enzymes (superoxide dismutase, SOD glutathione reductase, GR; ascorbate peroxidase, APX) in cultivar RH0-749 of Brassica juncea L. NaCl stress caused significant elevations in H₂O₂ and TBARS, and differentially modulated proline content, the activity of antioxidant enzymes, and impaired growth and photosynthetic functions. Exogenously applied 25 µM ABA negatively affected plant growth and photosynthesis in B. juncea without NaCl. In contrast, exogenously applied 25 µM ABA and 10 mM N, alone or in combination minimized oxidative stress, and maintained a fine-tuning between proline content and the activity of antioxidant enzymes, and thereby improved plant growth and photosynthetic functions in NaCl exposed B. juncea.

A reliable and affordable energy supply is a fundamental prerequisite for reducing poverty, promoting investment, and boosting economic growth in the developing world. Among the different challenges that developing countries face, chronic energy crises are harrowing. The crises result from the unsatisfactory state of the central grid, a misguided energy mix, and ill-informed policies, among other things. The possibility of solving energy crises through a variety of alternative solutions is worth exploring. This review discusses two paths of energy development side by side: a traditional “hard” path of energy development (i.e., central grid extension powered by fossil fuels and nuclear energy expansion) and a relatively recent “soft” path of energy development, which is based on energy conservation and the deployment of renewable energy resources. This paper focuses on one central axis of the discussion: centralization vs. decentralization. This discussion, in turn, has technological, economic/business, and political dimensions. Finally, the paper discusses the significance of the debate from meeting the developing world’s energy demands. The paper intends not to prefer one or another path of energy development, nor it gives recommendations on diffusing or adopting those development paths. Instead, it explores the literature’s central arguments that might help frame the questions for further research. While this debate could be used to ask interesting questions that might help solve the energy crisis in the developing world, the discussion informs countries to advance policies specific to their circumstances under the umbrella of a sound and thoughtful energy productivity policy framework.

Ovarian lymphoma is an infrequent disease, accounting for less than 1% of all non-Hodgkin lymphoma diagnosis. Symptoms include abnormal vaginal bleeding or discharge, abdominal pain, and urinary obstruction due to the large mass. In our case, a 60-year-old woman, underwent a total abdominal hysterectomy and bilateral salpingo-oophorectomy, as she presented with low-grade follicular lymphoma (FL) in both the ovaries, and the left ovary was observed to be enlarged. The tumor is categorized as lymphoma based upon immunohistochemical markers. Computed tomography (CT) scan of the chest, abdomen, and pelvis and bone marrow biopsy are important for the staging of primary lymphoma of the ovary. The first-line chemotherapy regimen includes rituximab, cyclophosphamide, doxorubicin hydrochloride (hydroxydaunorubicin), vincristine sulfate (Oncovin), and prednisone (R-CHOP) for rapidly proliferative non-Hodgkin lymphoma (NHL). Lymphomas with slower growth patterns can be treated with Bendamustine-Rituximab and don’t need aggressive R-CHOP treatment.

In this study, we surveyed over 600 participants to determine: a) major causes to mental stress during the pandemic and its future impacts, and b) diversity in public perception and acceptance (specifically for children) of Covid-19 vaccination. Statistical results and intelligent clustering outcomes indicate significant relationships between sociodemographic diversity, mental stress causes, vaccination perception, and Covid-19 infections. For instance, statistical results indicate significant dependence between mental stress due to Covid-19 and gender (p = 1.7e-05). Over 25% of males indicated work related stress comparing 35% in females however, females indicated more stressed (17%) due to relationships comparing to males (12%). Around 30% of Asian/Arabic participants don’t feel vaccination being safe as compared to 8% of white-British and 22% of white-European indicating significant dependence (p = 1.8e-08) with ethnicity. More specifically, vaccination acceptance for children is significantly dependent to ethnicity (p = 3.7e-05) where only 47% participants show willingness towards children’s vaccination. Primary dataset in this study along with experimental outcomes identifying sociodemographic information diversity with respect to public perception and acceptance of vaccination to children and potential stress factors might be useful for public and policy makers to be better prepared for future epidemics as well as working globally to combat mental health issues and running more effective vaccination campaigns.

Construction 4.0 is witnessing exponential growth in Digital Twin (DT) technology developments and applications, revolutionizing the adoption of Building Information Modelling (BIM) and other emerging technologies used throughout the lifecycle of the built environment. BIM provides technologies, procedures, and data schemas representing building components and systems. At the same time, DT enhances this with real-time data for cyber-physical integration, enabling live asset monitoring and better decision-making. Despite being in the early stages of development, DT applications have rapidly progressed in the AEC sector, resulting in a diverse literature landscape due to the various technologies and parameters involved in fully developing the DT technology. The intricate complexities inherent in digital twin advancements have confused professionals and researchers. This confusion arises from the nuanced distinctions between the two technologies, i.e., BIM and DT, causing a convergence that hinders realizing their potential. To address this confusion and lead to a swift development of DT technology, this study presents a holistic review of the existing research focusing on the critical components responsible for developing DT applications in the construction industry. The study identifies five crucial elements: technologies, maturity levels, data layers, enablers, and functionalities. Additionally, it identifies research gaps and proposes future avenues for streamlined DT developments and applications in the AEC sector. Future researchers and practitioners can target data integrity, integration and transmission, bi-directional interoperability, nontechnical factors, and data security to achieve mature digital twin applications for AEC practices. This study highlights the growing significance of DTs in construction and provides a foundation for further advancements in this field to harness its potential to transform built environment practices.

The present study assessed the effect of abscisic acid (ABA; 25 µM) and/or nitrogen (N; 10 mM) in minimization of salinity (NaCl; 100mM)-impact on growth, photosynthetic efficiency, Rubisco activity, nitrogen and sulfur assimilation, oxidative stress (H2O2), lipid peroxidation measured as thiobarbituric acid reactive substances, (TBARS), osmolyte (Proline) content, and the activity of antioxidant enzymes (superoxide dismutase, SOD glutathione reductase, GR; ascorbate peroxidase, APX) in cultivar RH0-749 of Brassica juncea L. NaCl stress caused significant elevations in H2O2 and TBARS, and differentially modulated proline content, the activity of antioxidant enzymes, and impaired growth and photosynthetic functions. Exogenously applied 25 µM ABA negatively affected plant growth and photosynthesis in B. juncea without NaCl. In contrast, exogenously applied 25 µM ABA and 10 mM N, alone or in combination minimized oxidative stress, and maintained a fine-tuning between proline content and the activity of antioxidant enzymes, and thereby improved plant growth and photosynthetic functions in NaCl exposed B. juncea.

Different materials prepared by appropriate synthesis methods and applying different post syn-thesis processes could be used as hole transport layer in perovskite solar cells. In the present work annealing was employed to enhance physical properties of copper oxide (CuO) thin films fabricated via spin coating technique and the effects of annealing on their optical, morphological, electrical and structural properties were investigated. The XRD findings revealed the polycrystalline structure with large crystallite size. Optical spectra showed larger transmission beyond the visible region, reduced absorption, and a decrease in bandgap energy from 1.93 eV to 1.81 eV. The Ag phonon modes at 299.22 and 304 cm-1 shown by the Raman shift confirmed the development of the CuO pure phase. FTIR spectra showed the Cu-O stretching band at 759, 764 and 446 cm−1. SEM revealed the agglomeration of nano crystallites with large grains on the surface. The carrier type conductivity of annealed CuO thin films was determined via two-point hot probe technique. Low resistivity values were determined via four-point probe method. These findings indicate that CuO thin films may be successfully used as a companion with an n-type layer in p-n junction solar cells, and a hole transport layer in perovskite solar cells.

Hyperlipidemia is an identified risk factor for metabolic syndrome, obesity and cardiovascular complications characterized by elevated levels of lipids in blood. The present study aimed to inhibit HMG-CoA reductase with 15-oxoursolic acid through in-vivo and in-silico assessments. HFD-induced hyperlipidemia in rats was developed with a marked increase in total cholesterol (58.34 ± 0.21 mg/dl), triglycerides (45.45 ± 0.39 mg/dl), LDL-c (66.12 ± 0.10 mg/dl), VLDL-c (19.34 ± 0.16 mg/dl), and a decrease in HDL-c (10.34 ± 0.18 mg/dl). The oral administration of 15-oxoursolic acid at a concentration of 30 mg/Kg b.w significantly reduced the serum concentration of total cholesterol (42.65 ± 0.54 mg/dl), triglycerides (32.33 ± 0.16 mg/dl), LDL-c (50.34 ± 0.15 mg/dl) and VLDL-c (13.15 ± 0.45 mg/dl) respectively and an increased in the serum HDL-c (18.56 ± 0.34 mg/dl). 15-oxo ursolic acid also caused a decrease in the coronary risk index and atherogenic risk index. In-silico studies of 15-oxoursolic acid with HMG-CoA reductase showed significant interaction capability with binding energy (-9.26805 Kcal/mol). It is concluded that 15-oxoursolic acid could significantly reduce the total cholesterol, triglycerides and LDL levels in HFD-induced hyperlipidemia rats which might lead to new medication with significant hypolipidemic potential.

In this article, we demonstrate the weak gravitational lensing in the context of Bocharova-Bronnikove-Melnikov-Bekenstein (BBMB) black hole. To this desire, we derive the deflection angle of light in a plasma medium by BBMB black hole using the Gibbons and Werner method. First, we obtain the Gaussian optical curvature and implement the Gauss-Bonnet theorem to investigate the deflection angle for spherically symmetric spacetime of BBMB black hole. Moreover, we also analyze the graphical behavior of deflection angle by BBMB black hole in the presence of plasma medium.

In this article, we analyze the weak gravitational lensing in the context of Einstein-non-linear Maxwell-Yukawa black hole. To this desire, we derive the deflection angle of light by Einstein-non-linear Maxwell-Yukawa black hole using the Gibbons and Werner method. For this purpose, we obtain the Gaussian optical curvature and implement the Gauss-Bonnet theorem to investigate the deflection angle of Einstein-non-linear Maxwell-Yukawa black hole. Moreover, we derive the deflection angle of light in the presence of plasma medium. We also analyze the graphical behavior of deflection angle by Einstein-non-linear Maxwell-Yukawa black hole in the presence of plasma as well as non-plasma medium.

In this study, we presented a simple highly sensitive sensor based on commercially available solid core photonic crystal fiber (PCF) and surface plasmon resonance (SPR) for measuring the refractive index (RI) of analytes. The numerical simulation based on the finite element method (FEM) has been examined to compute the optical properties such as confinement loss, power spectrum, and transmission intensity of the sensor. The most sensitive and inert plasmonic materials (gold and silver) have been assumed to be coated inside the fiber with the range of analytes RI from 1.32 to 1.40. The performance of the proposed sensor has been evaluated by tracing the several optical features like wavelength sensitivity, amplitude sensitivity, resolution of the sensor, and figure of merit. As a result, the comparative study between silver and gold elements has been carried out in which the maximum sensitivity received as 1.15 μm/RIU and 1.10 μm/RIU respectively. Whereas, on the base of power spectrum the obtained sensitivity was 513 μm/RIU for the gold layer. Moreover, the effect of other structural parameters (air holes and plasmonic layers thickness) on the sensing performance has been taken into an account. According to the simulation analysis and results, this sensor would have a great potential in various sensing applications of biomedical and liquid refractive index.

The goal of the next generation World Wide Web is machine readability through linked databases. To improve web search, integration, and mining in local languages like Urdu, there is a growing need to develop ontologies and vocabulary in these languages. The majority of people use the web in local languages for agriculture, social media interaction, news, etc. How to create agents for the integration of web data. In our country, the literacy ratio is very low and IT literacy is negligible. More comprehensive information for its target audience is only possible through the World Wide Web. Our first target is to improve and enhance the use of social media and the web in local languages. That will encourage its constructive use in Urdu for society and the economy. The Web in natural languages is the source of income for small and medium enterprises. The semantic web is concerned with linked databases and structured data. In this work, we are focused on some selected ontologies to be translated into natural languages. Expertise in Ontology Engineering helps us in job production. Ontology Engineering has extensive freelancing opportunities. Only if the web is correctly interpreted in regional languages is an economic boost achievable. A standardized foundation for data sharing and reuse on the internet is provided by the Semantic Web. In other words, a group of standards and technology that enables computers to comprehend the semantics (meaning) of material on the Web.

Drinking water supplies in the developing world often serve as a biosphere for various organisms. Viral gastroenteritis is a neglected area of research in Pakistan, there is no data for the prevalence of enteric viruses in drinking water of the largest city of Karachi. The present study aimed to provide a survey of the existence of enteric viruses: human adenovirus (HAdV), human enteroviruses (hEV), and genotype A rotavirus (GARV) in tap water. Using a simple PCR approach, we detected 20%, 43%, and 23% of HAdV, hEV, and GARV in tap water respectively. We have also shown an overall quality of tap water at the pumping station and consumer tap. Moreover, we assessed the efficiency of small-scale water treatment methods for the removal of viruses.

The prevalence of cardiac amyloidosis (CA), especially as a cause of heart failure, has significantly increased in recent years. Early detection and accurate assessment of the disease burden are crucial for initiating timely treatment and ensuring precise prognosis. CA primarily results from the infiltration of the myocardium by either immunoglobulin light chain fibrils (AL) or transthyretin fibrils (ATTR), leading to restrictive cardiomyopathy and eventual death if untreated. Over the past decade, advancements in diagnostic imaging and heightened clinical awareness have revealed a substantial presence of CA, particularly ATTR, among the elderly. These diagnostic improvements encompass echocardiography, cardiac computerized tomography scan, magnetic resonance imaging, and radionuclide scintigraphy with bone-avid tracers. Concurrently, significant progress has been made in therapeutic options, with new disease-modifying treatments now available that can dramatically alter the disease trajectory and improve survival rates when administered early. However, despite these advancements, there remains an urgent need for the early and accurate detection of CA to ensure that patients can fully benefit from these emerging therapies.

In this paper, we introduced a comprehensive study, based on both numerical and experimental analyses, of side polished (SP) single mode fibers (SMF) to investigate their evanescent field interaction with air and liquid analytes. In particular, the finite element method (FEM) and the beam propagation method (BPM) are employed to predict the optical properties of the SP-SMF. An ad-hoc experimental setup has been designed and built to characterize the side polished single mode fiber when air, water, and isopropanol are set in the side polished region. The sensitivity of the analytes is obtained as 1.207 V/RIU. The performance in terms of effective refractive index and transmittance are reported to show how these SP-SMF can be efficiently used for calculating the liquid refractive index. The simulation and experimental results display the significant performance of the SP-SMF as a sensing element.

Building an ethical culture is challenging and a basic requirement of the companies to embed transparency in their systems, creating a positive image; serving the internal and external communities. This paper based on detailed interviews of 12 family owned businesses over a period of 16 months explores how these companies build the ethical culture, identifying the ethical culture sustainability triggers, challenges and role of religion in such practices. The values, culture, community and social norms are identified as major ingredients of a sustainable ethical culture development and implementation of the ethical policies and procedures require institutional and structural mechanisms for effectiveness in family owned businesses. The findings at numerous occasions are in contrast to the literature, whereas, in other instances are similar. The religion, society, family image, the entrepreneurs themselves and their family members play a vital role. Non-interference in private matters of the employees, whistle blowing, code of ethics, training and awareness creation and a number of other factors play a leading role in ethical culture development in family businesses.

The long term sustainability and longevity of the business life cycle depends on correct understanding of the contextual constituents, triggers and dynamics, pre-startup planning, strategy and financial forecasting where business plans are developed to understand and forecast project viability, pitch ideas and secure funding. At the same time there is a lack of one page startup business model. Identifying this need, a ‘startup business strategy frame’ has been developed through learnings and encompassing design thinking, the business canvas and other strategy models and approaches. It provides a logical sequential flow and connects value drivers on environmental, strategic including operational and financial levels of proposed startup in a sequential format. To arrive at the frame as a logical conclusion a website www.strategizestartup.com is developed to build startup business model and plans in a time and cost effective process. The website assists the startups at each stage through a work and guidebook. The website takes the user from creative ideation by charting the context to build the strategy and measuring the financial impact. This startup strategy model will alleviate the problems for the first and second stage entrepreneurs to ideate creatively and strategizing. It also eradicates the issues related to reading and understanding long plans which could be an exhaustive and cumbersome process.

Background: Understanding factors associated with protective immunity against emerging viral infections is crucial for global health. Pakistan reported its first COVID-19 case on February 26, 2020, but compared to other countries, it experienced relatively low COVID-19-related morbidity and mortality between 2020 and 2022. The underlying reasons remain unclear. Our research aims to shed light on this crucial issue. Methods: We conducted serial household surveys over 16 months (Rounds 1-4, July 2020 - November 2021) in urban (Karachi) and rural (Matiari) Sindh, sampling 1100 households and 3900 individuals. Our comprehensive approach included measuring antibodies in sera, testing a subset of respiratory samples for COVID-19 using RT-PCR and antigen tests, and measuring Hemoglobin, CRP, Vitamin D, and zinc in Round 1. Results Participants showed 23% (95% CI 21.9-24.5) antibody seroprevalence in round 1, increasing across rounds to 29% (95% CI 27.4-30.6), 49% (95% CI 47.2-50.9) and 79% (95% CI 77.4-80.8). Urban residents had 2.6 times (95% CI 1.9-3.6) higher odds of seropositivity than rural residents. Seropositivity did not differ between genders. Individuals aged 20-49 had 7.5 (95% CI 4.6-12.4) times higher odds of seropositivity compared to children aged 0-4. Most participants were asymptomatic, with no reported mortality. Vitamin D deficiency was linked to seroprevalence. COVID-19 was confirmed in 1.8% of individuals via RT-PCR and antigen tests. Conclusions: The data suggests a steady increase in humoral immunity in Pakistan, likely due to increased transmission and potential cross-protective immunity, which may be associated with asymptomatic disease, leading to the reduction of morbidity and mortality observed.

Mitochondria is a cellular source of energy, playing an essential role in cellular stress induced by environmental stimuli. The genetic diversity of mitochondrial genes involved in oxidative phosphorylation affects the production of cellular energy and regional adaptation to various ecological (climatic) pressures influencing amino acid sequences (variants of protein). However, a little is known about the combined effect of protein changes on cell-level metabolic alterations in simultaneous exposure to various environmental conditions, including mitochondrial dysfunction and oxidative stress induction. Present study was designed to address this issue by analyzing the mitochondrial proteins in Fasciola species including Cytochrome C oxidase (COX1, COX2, COX3 and CYTB) and NADH dehydrogenase (ND1, ND2, ND3, ND4, ND5 and ND6). Mitochondrial proteins were used for a detailed computational investigation using available standard bioinformatics tools to explore structural and functional relationships. Our analysis shows that the mitochondrial protein family of Fasciola species are extensively diversified in all species studied, showing an extending role in various biological processes The results showed that the protein of COX1 of F. hepatica, F. gigantica and F. jacksoni consist of 510, 513 and 517 amino acids respectively. The alignment of proteins showed that these proteins are conserved in the same regions at ten positions in COX and CYTB proteins while at twelve locations in NADH. Three dimensional structure of COX, CYTB and NADH proteins were compared and the differences in additional conserved and binding sites in COX and CYTB proteins as compared to NADH were found in three Fasciola species. These results, based on the amino acid diversity pattern, were used to identify sites in the enzyme and the variations in mitochondrial proteins among Fasciola species. This study provides valuable information for future experimental studies including identification of therapeutics, diagnostics and immunoprophylactic interests with novel mitochondrial proteins.

In this paper, we discuss the weak gravitational lensing in the context of stringy black holes. Initially, we examine the deflection angle of photon by charged stringy black hole. For this desire, we compute the Gaussian optical curvature and implement the Gauss-Bonnet theorem to investigate the deflection angle for spherically balanced spacetime of stringy black hole. We also analyze the influence of plasma medium in the weak gravitational lensing for stringy black hole. Moreover, the graphical impact of coupling constant $\alpha$, impact parameter $b$ , black hole charge $Q$ on deflection angle by charged stringy black hole has been studied in plasma as well as non-plasma medium.

In advanced world stroke is one of the disabling cause of death that can be managed with thrombolysis if presents early despite further risk of intracerebral haemorrhage. Secondary prevention is an important objective in ischaemic stroke where recurrence is very high with subsequent stroke. Carotid End Arterectomy impact a definitive and effective role for both symptomatic and asymptomatic carotid stenosis for secondary stroke prevention in selective cases. Thrombolysis is a potential primary management for certain group whereas carotid surgery employs secondary preventative measure in a specified ischaemic stroke group.

In this study organic bulk heterojunction (BHJ) solar cell along with the spiro OMeTAD as a hole transport layer (HTL) and the PDINO as an electron transport layer (ETL) was simulated through the Solar Capacitance Simulator, one dimensional (SCAPS-1D) software to examine the performance of this type of polymer thin film organic solar cells. As an active layer the blend of polymer donor PBDB-T and non-fullerene acceptor ITIC-OE was used. Numerical simulation was performed by varying the thickness of HTL and active layer. Firstly, the HTL layer thickness was optimized to 50 nm, after that the active layer thickness varied up to 80 nm. These results of simulation demonstrated that the HTL thickness has rather little impact on efficiency while in the case of active layer thickness improves efficiency significantly. The temperature effect on the performance of solar cells was considered, by the simulation performed for temperature from 300 K up to 400 K and the efficiency of solar cell decreases with increasing temperature. Generally, polymer films usually are full of traps and defects, the density of defects (Nt) value was also introduced to the simulation, and it was confirmed that with the increasing of defect density (Nt), the efficiency of solar cell decreases. After thickness, temperature and defect density optimization, the reflection coating was also applied on it. It turned out that by introducing the reflection coating on the back side of solar cell, the efficiency increases by 2.5 %. Additionally, the positive effect of HTL and ETL doping on efficiency of this type of solar cells was demonstrated.

Academic failure, low attendance, financial difficulties, and mental illness are some of the major reasons most students drop out of high schools. We investigated how high school dropout risk is affected by socioeconomic, demographic, and institutional characteristics. Therefore, research design is composed of a literature review, Questionnaire surveys by interviewing each student. Besides, the analysis and statistical modelling, the Logistic Regression method was used. The results show that academic performance, job, lack of interest and low learning ability were the significant individual characteristics that affect the high school dropout. Moreover, parental characteristics, including financial condition, lack of awareness, and education, are significant factors associated with high school dropout rates. Some other related factors, such as adaptability and influence of the peer groups, abandoning school by siblings, and extra responsibility at home and a joint family system, are also some notable factors that significantly affect the dropout rate in schools Malakand District of KP province. This research study delivered the results that contribute to the literature in education to identify different factors like student's own, parental, institutional, and household characteristics, which affect a student being a dropout from high school in Malakand district Pakistan.

The aim of the current study was to develop and evaluate the therapeutic potential of apocynin (APO) loaded pH-sensitive nanoparticles (NPs) based transdermal hydrogel for management of rheumatoid arthritis (RA). Slightly modified nanoprecipitation technique was used for preparation of polymeric nanoparticles. Optimization was done through design expert software. Optimized APO-NPs were loaded into carbopol-934 based hydrogel as final dosage form and further studied for physicochemical properties. Optimized APO-NPs formulation had a minimum particle size 63.44 nm, polydisperibility index 0.161, and zeta potential -15mV with a maximum encapsulation efficiency of 89%. In-vitro and ex-vivo studies of APO-NPs based hydrogel was performed at pH 5.5 (pH of normal skin) and 6.8 (pH of inflammed joint) showed a pH-responsive sustained drug release and increased penetration in comparison to free APO based hydrogel. The stability studies of APO-NPs based hydrogel were done to strengthen the potential use of the prepared formulation through transdermal route. Assessment and therapeutic efficacy of the prepared pH-sensitive nanocarriers system was evaluated in chronic inflammatory RA mice model. Parameters associated with chronic inflammation were investigated including behavioral changes and histopathological, and radiological x-rays images of joints of mice paws. In-vivo study depicts improvement in behavioral parameter, decline in synovial hyperplasia and bone structure restoration. In conclusion, APO loaded pH-sensitive NPs based transdermal is a promising carrier system that can effectively manage RA.

Cash holding is important for Chinese manufacturing firms coping with the increasing cost of financing and stiff market conditions. This study examines the impact of cash holding on the firm value of Chinese manufacturing firms. We find evidence that a non-linear relationship exists between cash holding and firm value in manufacturing firms of China. The study reveals that financially constrained firms having a higher level of cash holding negatively affects the firm value, while the unconstrained firms having a lower level of cash holding positively influences the firm value. Finally, this research is enriched by adopting the novel measure of managerial op-timism and reveals the interactive role of cash holding and optimism on firm value. The study concludes that managerial optimism influences the firm’s cash holding decisions and this is more costly for unconstrained firms.

Cadmium Sulfide nanoparticle (CdS-LA hybrid nanoparticles) was synthesized here by a green approach using the precursor cadmium acetate and sodium sulphide along with the extract of a plant Lathyrus aphaca L. containing the phytochemicals which were responsible for surface modification of nanoparticles. The nanoparticle was used to evaluate their inhibition potential against species of bacteria and fungi. The nanoparticles were characterized by XRD which demonstrates the hexagonal crystal structure. SEM confirms the homogenous surface appearance of the CdS-LA hybrid crystalline structure. EDX analysis confirms surface modification of nanoparticles by phytochemicals. FTIR confirmed the Cd-S linkage laterally with the related functional groups and the presence of metabolites on the surface of nanoparticles. The UV-visible spectroscopy confirmed the peak at the characteristic wavelength range but a slight shift occurred in the peak of the CdS nanoparticles due to the presence of the phytochemicals. This study particularly provides an environment-friendly strategy to synthesize the CdS nanoparticles capped by Lathyrus Aphaca L. extract that are biologically active due to the mediation of the plant extract. CdS-LA hybrid nanoparticles have shown inhibition potential against various species of bacteria and fungi and realize the biological importance of the green synthesis of nanoparticles especially mediated with the plant extract.

Type 2 diabetes mellitus (T2DM) is a global health concern driven by factors such as obesity, sedentary behavior, and poor diet. This study uses data from the 2017-18 Bangladesh Demographic and Health Survey (BDHS) to analyze regional and individual predictors of diabetes and predi-abetes. Employing a Bayesian multinomial mixed-effects model, we account for regional varia-bility and individual factors like age, gender, BMI, residence, wealth, education, employment, and hypertension. Our results indicate significant regional differences and associations between de-mographic and health-related factors with diabetes risk. Younger individuals and those with higher BMI are more likely to be diabetic, while hypertension significantly increases diabetes risk. We applied machine learning (ML) models, including logistic regression, decision trees, k-nearest neighbor, linear discriminant analysis, and random forest, to classify diabetic status using these predictors, assessing their accuracy through 10-fold cross-validation. Logistic regression and linear discriminant analysis demonstrated robust performance across various response distributions. Simulation studies further examined the impact of different response distributions on model performance, revealing significant differences in classification accuracies. This approach of esti-mating parameters with a Bayesian model, applying ML for prediction, and conducting simulation studies to explore various scenarios highlights the importance of integrating these methodologies for effective diabetes prediction, providing insights for public health strategies to mitigate T2DM's impact.

This study was to designed to develop sorafenib-loaded polymeric nanoparticles, surface-modified with pluronic F-127 for the effective treatment of hepatocellular (HCC) and renal cell carcinomas (RCC). Poly lactic coglycolic acid (PLGA) was used to encapsulate different concentrations of sorafenib by a simple modified solvent evaporation method applying pluronic F-127 as a surfactant and coating agent. The preformulation and characterization studies were conducted to evaluate the incompatibilities among sorafenib, PLGA and pluronic F-127, and physicochemical properties of the formulations, respectively. The sizes of the coated and plain PLGA nanoparticles were ~140 ± 14.7 nm and ~ 120 ± 10.1 nm, respectively. It has been confirmed from the in vitro release studies that PLGA sustained the release of sorafenib, avoiding the initial burst release, while the in vivo studies demonstared that surface-modified nanoparticles have greater affinity in the target aorgans than plain PLGA nanoparticles and free drug keeping the dose constant (20 mg/kg body weight). The delivery of sorafenib-loaded polymeric PLGA nanoparticles into the target tissues and their pharmacokinetic parameters have been improved significantly compared to the reported formulations.

Glaciers in northern Pakistan are a prime source of fresh water, providing headwater in the Indus River System and serving as a lifeline to millions of people in the region. These glaciers undergo continuous changes by melting due to global warming or accumulation due to snowfall/precipitation at higher altitudes. In this study, we used remote sensing data to quantify glacier changes in spatiotemporal variability in the past three decades. Five glaciers in the Gilgit region (near the junction of the Hindukush and Karakoram Mountains) with an extent of less than 5 square kilometers were selected, namely Phakor glacier, Karamber glacier, East Gammu glacier, Bhort glacier, and Bad-e-Swat glacier. The fluctuations in these glaciers were monitored using a digital elevation model (DEM) and a cloud-free continuous series of Landsat satellite pictures from the minimal snow cover season. The annual climatic trends were studied through spatially interpolated gridded climate data WοrldClim version-1 climate database for 1970 – 2000. We used it to study the variations of minimum and maximum temperature, solar radiation, and precipitation by preparing sub-sets from the original global grids. The temporal assessment of Bhort, Bad-e-Sawat, East Gammu, Karamber, and other rivers was also carried out. It is observed that the glaciers in the Gilgit watershed are rather stable. The little variability of glaciers is due to their geographic condition, altitude, topography, and orientation. The mapped glacier classes have been validated to check the accuracy assessment through an error matrix method. The kappa coefficient from the error matrix has been calculated to be 84 %. The study makes a critical input to a greater understanding of watershed controlling and hydrological processes in the upper Indus catchment's Gilgit watershed.

As urban populations and transport demand expand, Pakistani metropolitan centers face traffic congestion and environmental challenges. This research aims to assess carpooling (CP) to alleviate traffic congestion, fuel demand, and pollution. This study was conducted in Islamabad, a fast-growing city with a high percentage of personal cars in Pakistan, to assess the travelers’ perceptions, and public acceptance of CP and determine the effects on traffic congestion, fuel consumption, and CO2 emissions. The investigation of travelers' perceptions towards CP was conducted through a stated preference questionnaire survey. A total of 700 responses from one million population of Islamabad were collected as per Sloven's Formula. SPSS and Smart PLS software were used for data analysis. Various factors influencing peoples’ travel perceptions, mode choice, and tendency to carpool, were categorized to evaluate the relationship between travelers’ perception and the tendency to carpool in the presence of mode choice as a mediating variable. Confirmatory factor analysis was conducted in SMART PLS to refine the number of scale items for each variable. One-way ANOVA, step-wise and mediated multiple regression analysis was conducted in SPSS to check the direct and mediating relationship between different variables. Moreover, the probability of reducing traffic congestion and assessing fuel reduction resulting from CP was also analyzed. The findings imply that travelers’ mode choice acts as a mediator between the relationship between travelers’ perception and tendency to carpool. Furthermore, results predicted that CP might reduce 0.25 million cars on the road, about 33.6% of the total private vehicles. Thereby, saving up to 546,810 barrels per year, about 3.42% of Pakistan's total petrol consumption. The findings of this study could be helpful for transport planners, environmentalists, and policymakers to implement carpool systems. Thus, reducing traffic congestion and harmful CO2 emissions and maintaining a sustainable environment.

Silybum marianum L. is a well-known medicinal herb, primarily used in liver protection. Light strongly affects several physiological processes along with secondary metabolites biosynthesis in plants. Herein, S. marianum was exploited for in vitro potential under different light regimes in the presence of melatonin. The optimum callogenic response occurred in combination of 1.0 mg/L α-naphthalene acetic acid and 0.5 mg/L 6-Benzylaminopurine under photoperiod. Continuous light associated with melatonin treatment increased total flavonoid content (TFC), total phenolic content (TPC) and antioxidant potential, followed by photoperiod and dark treatments. The increased level of melatonin has a synergistic effect on biomass accumulation under continuous light and photoperiod, while adverse effect was observed under dark condition. More detailed phytochemical analysis showed maximum total silymarin content (11.92 mg/g DW) when placed under continuous light + 1.0 mg/L melatonin. Individually, the level of silybins (A and B), silydianin, isolsilychristin and silychristin was found highest under continuous light. Anti-inflammatory activities were also studied and highest percent inhibition was recorded against 15-LOX for cultures cultivated under continuous light (42.33%). The current study helps to better understand the influence of melatonin and different light regimes on silymarin production as well as antioxidant and anti-inflammatory activities in S. marianum callus extracts.

We investigate the behavior of thermal quantum coherence in the Heisenberg XXX model for a two-qubit system placed in independently controllable Inhomogeneous magnetic fields applied to two qubits respectively. We discuss the behavior of quantum coherence by systematically varying the coupling parameter, magnetic field, and temperature for both ferromagnetic and antiferromagnetic cases. The results show the interesting behavior of quantum coherence in a certain range of parameters. Generally, it is observed that quantum correlations decay with temperature, but in the ferromagnetic case with uniform magnetic interaction, it rises with temperature up to a certain threshold value and ultimately it decreases its value to zero. Moreover, it is observed that preserving the quantum coherence for small temperatures is very hard with the increasing magnetic field because, at small temperatures, quantum coherence decays sharply with the increase in magnetic field whereas at larger temperatures it decays completely at fairly large values of the magnetic field. The variation of quantum coherence with uniform magnetic field in the antiferromagnetic case is observed to be Gaussian for larger temperature but at zero or nearly zero temperature, it behaves as a constant function for uniform magnetic field up to a threshold value and then decays to zero with an infinite slope. This shows the signature of quantum phase transition from quantum nature to classicality.

Emerging and reemerging pathogens is a global challenge for public health. Recently, a novel coronavirus disease emerged in Wuhan, Hubei province of China, in December 2019. It is named COVID-19 by World Health Organization (WHO). It is known to be caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) that affects the lower respiratory tract and manifests as pneumonia in humans. Coronaviruses (CoVs) are structurally more complicated as compared to other RNA viruses. This viral epidemic has led to the deaths of many, including the elderly or those with chronic disease or compromised immunity. Viruses cause infection and diseases in humans of varying degrees, upper respiratory tract infections (URTIs) cause common cold while lower respiratory tract infections induce pneumonia, bronchitis, and even severe acute respiratory syndrome (SARS). The costs of COVID-19 are not limited. It equally affects all the medical, sociological, psychological, and economic aspects globally. This is regarded as the third deadly outbreak in the last two decades after Severe Acute Respiratory Syndrome SARS (2002–2003) and Middle East Respiratory Syndrome MERS (2012). Based on the sequence homology of SARS-CoV-2, different animal sources including bats, snakes, and pangolins have been reported as potential carriers of this viral strain. Real-time RT-PCR represents the primary method for the diagnosis of new emerging viral strain SARS-CoV-2. The transmission dynamics suggest that SARS-CoV-2 is transmitted from person-to-person through direct contact or coughing, sneezing, and by respiratory droplets. Several anti-viral treatments including lopinavir/ritonavir, remdesivir, chloroquine phosphate, and abidor are also suggested with different recommendations and prescriptions. Protective and preventive strategies as suggested by various health organization i.e. WHO and US Center for Disease Control and Prevention (CDC) must be adopted by everyone. This review covers the important aspects of novel COVID-19 including characteristics, virology, symptoms, diagnostics, clinical aspects, transmission dynamics, and protective measures of COVID-19.

During the last two decades, energy poverty has captured a growing attention of researchers and policymakers due to its strong association with economic poverty and poor economic performance. This study uses a broad set of macro level indicators and makes the first attempt to measure energy poverty and its impact on economic growth of Pakistan over the period 1990 to 2017. In particular, our energy poverty indicator considers four main dimensions of energy poverty, namely, energy services, clean energy, energy governance and energy affordability. Our main results show that though the overall energy poverty has reduced in Pakistan during the selected sample period, the country shows an increasing dependence on polluted energy supply in order to meet its growing demand of energy. In second stage of the investigation, we test the neoclassical growth theory where we incorporate energy poverty along with human capital as source of economic growth. Our cointegration results reveal a strong relationship between energy poverty and economic growth that is also dynamically stable in short run. These strong negative linkages between energy poverty with economic growth for the sample economy complement the previous literature on the subject.

This comprehensive critical review shows how green buildings and energy optimization solutions improve indoor air quality as well as environmental quality (IEQ) and human health. Electricity-efficient green buildings create a better indoor atmosphere and save electricity. Green buildings improve occupant well-being through IAQ, thermal comfort, acoustics, and lighting. Renewable energy, green construction materials, and intelligent technologies increase sustainability and reduce environmental impact. Environmental hazards, architectural design, and societal variables can improve indoor air quality and subsequently reduce health risks linked with poor air quality. The evaluation highlights the pros and cons of low-cost IAQ sensors and equipment. These devices provide valuable insights, but calibration and validation using reference equipment are necessary to ensure accuracy and reliability. Architects, engineers, environmentalists, and policymakers are essential in creating green buildings with high IEQ. Prioritizing occupant comfort, health, and productivity ensures a sustainable and healthy future for future generations. However, continual monitoring and research are needed to improve green building practices and overcome construction problems. Intelligent models for continual on-field calibration of low-cost sensors may improve performance. Green buildings benefit occupants and the environment by optimizing energy use and using IAQ monitoring technologies.

This paper discusses some of the most common misconceptions about large language models (LLMs), including the belief that they are sentient or conscious, that they are always accurate, and that they can replace human creativity. The paper also proposes a strategy for overcoming these misbeliefs, which involves educating the public about the capabilities and limitations of LLMs, developing guidelines for the responsible use of LLMs, and conducting more research to understand the potential impact of LLMs on society.

The elegance of mathematical models in quantum mechanics has often been seen with awe, and especially frustration. Nonetheless, the mathematical physics of quantum mechanics is fascinating beyond measure. And fortunately, there are quite baffling things about quantum mechanics that showed us what we never thought could be seen, making it simpler to figure out the behavior of physical systems without having to delve into the subtleties of the subject. In this paper, we present a review on the density of quantum states in an intuitive fashion that is easily comprehensible to undergraduate students with an elementary background in physics.

The purpose of this paper is to develop WebSecuDMiner algorithm to discover unusual web access patterns based on analysing the potential rules hidden in web server log and user navigation history. Design/methodology/approach: WebSecuDMiner uses equivalence class transformation (ECLAT) algorithm to extract user access patterns from the web log data, which will be used to identify the user access behaviours pattern and detect unusual one. Data extracted from the web serve log and user browsing behaviour is exploited to retrieve the web access pattern that is produced by the same user. Findings: WebSecuDMiner is used to detect whether any unauthorized access have been posed and take appropriate decisions regarding the review of the original rights of suspicious user. Research limitations/implications: The present work uses the database which is extracted from web serve log file and user browsing behaviour. Although the page is viewed by the user, the visit is not recorded in the server log file, since it can be access from the browser's cache.

The fatigue crack growth rate (FCGR) of aluminium alloys under the combined influence of temperature and humidity remains a relatively unexplored area, receiving limited attention due to its intricate nature and challenges in predicting the combined impact of these factors. The challenge was to investigate and address the specific mechanisms and interactions between temperature and humidity, as in coastal environment conditions, on the FCGR of aluminium alloy. The present study conducts a comprehensive investigation on the combined influence of temperature and humidity on the FCGR of Al6082 alloy. The fatigue pre-cracked compact tension specimens were corroded for 7 days and then subjected to various temperature and humidity conditions in a thermal chamber for 3 days to simulate coastal environments. The obtained data were analysed to determine the influence of temperature and humidity on the FCGR of Al6082 alloy. An empirical model was also established to predict fatigue life cycle values under these environmental conditions precisely. The correlation between FCGR and fracture toughness models was also examined. The Al6082 alloy exhibits a 34% increase in the Paris constant C, indicating reduced FCGR resistance due to elevated temperature and humidity levels. At the same time, fatigue, corrosion, moisture-assisted crack propagation, and hydrogen embrittlement lead to a 27% decrease in threshold fracture toughness. The developed model exhibited accurate predictions for fatigue life cycles, and the correlation between fracture toughness and FCGR showed less than 10% error, indicating a strong relationship between these parameters.

Ring necked-pheasant (Phasianus colchicus) is bird of order Galliformes. Ring necked-pheasant is also known as gallinaceous bird and game bird. It looks like chicken bird. It is national bird of South Dakota. It is mostly found in wild areas but in Pakistan it exists as Domestic bird. It has high proteins and low fat in its meat. The present study was conducted to check the effect of ascorbic acid on sperm Motility, sperm cytoplasmic membrane integrity, sperm livability and acrosome integrity of Ring-necked pheasant at different concentrations of ascorbic acid (0mM, 1mM, 2mM, 3mM and 4mM) were used. Semen was collected by abdominal massage technique. Motility of sperm was greater than 70%.Then it was processed further. The cryopreservation of semen was checked at various stages like Post Dilution, Post Cooling, Post Equilibration and Post Thawing. Semen was cooled from post-dilution stage (37⁰ C) to post-cooling (20⁰C).Then it further cooled gradually to get post-equilibration stage (4⁰ C) within 24 hours. After that 10% glycerol was added to the sample. Then it was transferred to liquid nitrogen (LN₂) cylinder for 24 hours. After thawing stage sample was removed from LN₂ cylinders and placed in water bath for 4 hours to achieve post-thawing. Then performed sperm quality assays at each stage of cryopreservation. Sperm motility was assessed by Neubauer Chamber Hemocytometer. Plasma Membrane Integrity was checked by using Hypo Osmotic Swelling Test with the help to 2% Eosin. Sperm livability was assessed by Lake’s glutamate solution and sperm Acrosome Integrity was checked by dual staining technique by using Formal citrate solution and Giemsa stain. The better results were seen at 3mM treatment of ascorbic acid. Sperm motility percentage was significantly different (P < 0.05) on 3mM treatment on all the stages of cryopreservation rather than other treatments. Plasma membrane integrity assay also showed good results at same concentration (P < 0.05) on all the stages of cryopreservation rather than other treatments. At the sperm livability stage 3mM treatment showed significantly difference (P < 0.05) on all the stages of cryopreservation rather than other treatments. The sperm acrosome integrity showed highest percentage on 3mM treatment (P < 0.05) on all stages of cryopreservation rather than other treatments. Effect of ascorbic acid on all the quality parameters (sperm motility, plasma membrane integrity, livability and acrosome integrity) was showed significant difference (P < 0.05) at 3mM treatment of ascorbic acid as compare to control as well as remaining treatments. It was seen that by increasing the concentration of ascorbic acid from 3mM concentration to onward it shows negative results on its cryopreservation. Now this cryopreserved semen can be transfer from one place to another place to obtain good varieties as well as better genetic characteristics of this species.

In Pakistan, 2018 National Nutrition Survey reported 40% of under five children were stunted. This study assesses the effectiveness of nutritional supplementation in reducing stunting among under-five children in two rural districts in Sindh, Pakistan. This was a mixed-method quasi-experimental study with intervention and control population. 3397 and 3277 under-five children participated in the baseline and end-line surveys. Both study areas were matched for demographic and economic circumstances. The participants received nutrient supplements underpinned by nutrition behaviour change communication for appropriate complementary feeding practices and hand hygiene targeted at primary caregivers during the first 1000 days of an infant's life. The impact was assessed using the difference in difference analysis with kernel propensity score matching to adjust the differences among control and intervention populations.

The current study was formulated with the aim of assessing the impact of the Extent of Drug addiction on the Family environment and interventions for drug-addicted youth in rural areas of Dir Lower Khyber Pakhtunkhwa, Pakistan. The study comprised a dependent variable (Extent of Drug addiction) and an independent variable (Family Environment). A sample size of 266 was randomly selected for primary data collection through structured interviews. The collected information was evaluated through descriptive analysis (frequency and percentage distribution) and inferential analysis, specifically utilizing the Chi-square Statistical Test. The study concluded that drug addiction among youth has an adverse impact on the family environment, leading to instability and violent behavior. Further, families of drug-addicted youth experience a high level of dissatisfaction in relationships, often culminating in divorce. Similarly, the families of drug-addicted are characterized by low cohesion, role conflict, and tolerance. Thus, the government should formulate polices and strategies for the prevention of drug addiction, with speedy implementation across all institutional dynamics, including family. Moreover, It is also crucial to rehabilitate the lifeblood of a nation (youth) in terms of socio-economic, emotional and psychological growth. These recommendations were put forward in the light of the current study.

Sugarcane is an important industrial crop of semitropical and tropical areas. Due to the importance of this crop it is cultivated on nearly 20 million hectares by more than 90 countries. This crop belongs to family Poaceae, a grass family which is economically vital tracheophyte family that has properties much like that of wheat, maize, rice and sorghum. The Poaceae family is globally vital for providing dietary macromolecules, carbohydrates, and different nutrients. The most important item of sugarcane for the consumption is sucrose that gets accumulated in the stalk internodes. Sucrose is taken out and refined by different mills which is used as a sweetener in human food industries and in the fermentation industry. Large production of alcohol is attained by Brazilian sugarcane industries.

Zinc nanoparticles (ZnNPs) open new opportunities for biomedical applications as a strategy against microbes and dye removal in an efficient way. The composite ZnNPs using Rhododendron arboreum (R. arboreum) stem bark were synthesized and characterized for UV-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The synthesized nanoparticles showed zones of inhibition of 23±0.09, 18±0.1 and 16±0.05 mm, against the Klebsiella pneumoniae (K. pneumoniae), Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli strains. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) values against K. pneumoniae, S. aureus, and E. coli were found to be 34±0.21 and 72.71±0.47, 47±0.11 and 94.86±0.84 and 94±0.18 and 185.43±0.16 µg/mL, respectively. The biosynthesized ZnNPs resulted in significant eradication of the outer and inner membranes of the bacterial cells. Likewise, the synthesized ZnNPs showed time-dependent photocatalytic degradation activity and revealed 65% methyl orange dye degradation with an irradiation period of 6 hours. The findings of this study suggest the suitability of the novel R. arboreum stem bark-based ZnNPs as an effective ameliorant against bactericidal activities and photocatalysts for the removal of hazardous water contaminants.

Over the last three decades, special economic zones (SEZs) have given new impetus to the ever-growing export-oriented industrialization in developing countries. Where various economies have benefited from SEZs, many zones have ended up becoming enclaves with trifling advantage. The SEZs in Pakistan have experienced the same fate and failed to contribute to exports, employment and creating linkages with the domestic economy. Recently under China Pakistan Economic Corridor (CPEC), SEZs are proposed to be set up in Pakistan; with a hope to fuel the stuttering economy. However, it is pertinent to first understand the local context and device policies considering stakeholders' perspectives. This study aims to identify the factors for the successful implementation of SEZs derived from the regional context of Pakistan. In-depth interviews are conducted from most relevant stakeholders, who have been involved in the development of SEZs. The results pointed towards the removal of political influence over zones and government taking the lead role in deciding the types of industry to be invited in these zones. Each zone should have a clear vision of development based on its regional advantage. The zone promotions should be based on competitiveness rather than fiscal incentives. Joint ventures and PPP to be encouraged inside the zones for sustainable operations.

Bone marrow-derived mesenchymal stem cells (BMSCs) have been considered a promising therapeutic approach to cardiovascular disease. This study intends to compare the effect of BMSCs through a standard active cardiac support device (ASD) and intravenous injection on global myocardial injury induced by isoproterenol. BMSCs were cultured in vitro, and the transplanted cells were labeled with a fluorescent dye CM-Dil. Isoproterenol (ISO) was injected into the rats; two weeks later, the labeled cells were transplanted into ISO-induced heart-injury rats through the tail vein or ASD device for five days. The rats were sacrificed on the first day, the third day, and the fifth day after transplantation to observe the distribution of cells in the myocardium by fluorescence microscopy. The hemodynamic indexes of the left ventricle were measured before sacrificing. H&E staining and Masson’s trichrome staining were used to evaluate the cardiac histopathology. In the ASD groups, after three days of transplantation, there were many BMSCs on the epicardial surface, and after five days of transplantation, BMSCs were widely distributed in the ventricular muscle. But in the intravenous injection group, there were no labeled-BMSCs distributed. In the ASD+BMSCs-three days treated group and ASD+BMSCs -five days-treated group, left ventricular systolic pressure (LVSP), the maximum rate of left ventricular pressure rise (+dP/dt), the maximum rate of left ventricular pressure decline (-dP/dt) increased compared with model group and intravenous injection group (P<0.05). By giving BMSCs through ASD device, cells can rapidly and widely distribute in the myocardium and significantly improve heart function.

In this paper a new monolithic Eulerian formulation in the framework of non-classical continuum is presented for the analysis of fluid-strucutre interaction problems. In this respect, Cosserat continuum theory taking into account the micro-rotational degrees of freedom of the particles is considered. Continuum description of the model and variational formulation of the governing flow dynamics for non-classical -fluid-structure interaction nCFSI is presented. The model is analyzed by computing a well known benchmark problem by Hecht and Pironneau [16]. The algorithmic description is presented and implemented using FreeFEM++. Code is validated with the benchmark solution of Turek and Hron [38] in case of flow around a flag attached with cylinder. New microstructral behavior of the solution is studied and numerical simulations and results are shown in the form of figures. Some interesting feature of the flow is observed and microstructural characteristics are discussed.

The world is growing very rapidly concerning technology. In the next-generation Internet, the existing architecture requires to be upgraded from Host-Centric Networking paradigm to Information-centric networking architecture. The unique aspect of information-centric networking is in-network cashing. Due to the system augmentation and In-network cashing technique, this novel system needs extremely high content security to ensure system integrity and maintenance. 5G network may be supported by the Information-Centric Network due to its high data transmission rate. In order to handle the serious security issues such as attack on confidentiality, authentication and integrity of the content, a Digital Signature based Access Control Mechanism in Information-Centric Network (DSAC) scheme is proposed to enhance security of ICN. Briefly, this new scheme uses Digital Signature, hash function, Trusted Third Party (TTP) and Proxy TTP. The client request for content, after receiving a request, the content provider generates and encrypts content with the digital signature and random value ‘k’ hash function and send it to TTP. After the signing process, the TTP sends the encryption hash key to Proxy TTP. In this proposed scheme authentication, confidentiality, the integrity aspects of the content security are improved.

The most important plastic resins used for wire coating are Polyvinyl Chloride (PVC), Nylon, Polysulfone and Low-high density polyethylene (LDPE / HDPE). In this article,the coating process is performed using elastic-viscous fluid as a coating material for wire coating in a pressure type coating die. The elastic-viscous fluid is electrically conducted in the presence of an applied magnetic field. The governing non-linear equations are modeled and then solved analytically by utilizing an Adomian decomposition method (ADM). The convergence of the series solution is established. The results are also verified by Optimal Homotopy Asymptotic Method (OHAM). The effect of different emerging parameters such as non-Newtonian parameters α and β, magnetic parameter M and the Brinkman number Br on solutions (velocity and temperature profiles) are discussed through several graphs. Additionally, the current result also compares with the published work already available in the literature.

Hepatitis B and C are major health issues in developing countries such as Pakistan and Afghan-istan. The aim of this study was to determine the prevalence and effectiveness of a screening program for hepatitis B and C in a region with no existing programs, and to estimate their prev-alence in the general population in Khyber Pakhtunkhwa Province, Pakistan, as well as in Afghan refugees or migrants. A prospective cohort study was done in the general population of Peshawar and its adjacent districts, as well as migrants from neighboring provinces of Afghani-stan, who presented to our tertiary-care health facility. A Microsoft Excel registry was created for data collection, which were analyzed using IBM SPSS via descriptive analysis, normal distribution curve histograms, and chi-squared tests. A total of 9563 individuals were screened for hepatitis (5894 males and 3669 females), including Afghan migrants in Peshawar and surrounding districts. 876 individuals tested positive for hepatitis, with 538 positive for hepatitis B (383 males and 155 females) and 330 positive for hepatitis C (198 males and 134 females). Eight individuals had a hepatitis B and C co-infection. Among the study population, the prevalence rates were 2.2% for hepatitis B and 2.3% for hepatitis C, of which the Afghan migrants accounted for 2.7% and 0.5%, respectively. According to the gender-based distribution, hepatitis B was more prevalent in males, whereas there was no significant gender-based difference for hepatitis C. Our results highlight the need for a comprehensive approach to control hepatitis B and C in Pakistan and Afghanistan. Increased awareness, improved healthcare, and preventive measures such as screening and elimination programs to prevent severe liver diseases and eradicate hepatitis are necessary.

The multidisciplinary nature of the work required for research in the Covid-19 pandemic has created new challenges for health professionals in the battle against the virus. They need to be equipped with novel tools and resources ---that have emerged during the pandemic--- to gain access to breakthrough findings, know the latest developments, and to address their specific needs for rapid data acquisition, analysis, evaluation, and reporting. Because of the complex nature of the virus, the healthcare systems worldwide are severely impacted as the treatment and the vaccine for Covid-19 disease are not yet discovered. This leads to frequent changes in regulations and policies by governments and international organizations. Our analysis suggests that given the abundance of information sources, finding the most suitable tool for a given task is one of such challenges. But health professionals and policymakers need access to the most relevant, reliable, trusted, and latest information and tools that can be used in their day-to-day tasks of Covid-19 research and analysis. In this article, we present our analysis of various novel and important tools that have been specifically developed during the Covid-19 pandemic and that can be used by the health professionals community to help in advancing their analysis and research. These tools comprise of search engines, information repositories for literature and clinical trials, data sources, dashboards, and forecasting models. We present list of the minimally essential tools to serve a multitude of purposes, from hundreds of those developed since the beginning of the pandemic. A critical analysis is provided for the selected tools based on 17 parameters that can be useful for researchers and analysts for their evaluations. These parameters make up our evaluation framework and have not been used previously for analysis and evaluation. Hence, knowledge of the tools will not only increase the productivity but will also allow to explore new dimensions for using existing tools with more control, better management, and greater outcome of their research. In addition, the parameters used in our framework can be applied for future evaluations of similar tools and health professionals can adapt them for evaluation of other tools not covered in this analysis.

The paper discusses how joint damage and deterioration affect the seismic response of existing reinforced concrete frames with sub-standard beam-column joints. The available simplified modeling techniques are critically reviewed to propose a robust, yet computationally efficient technique for simulating the nonlinear behavior of substandard beam-column joints. Improvements over the existing models include simulation of the cyclic deterioration of joint stiffness and strength as well as pinching in the hysteretic response, implemented considering a deteriorating hysteretic rule. A fibre-section forced-based inelastic beam-column element is developed; considering improved material models and fixed-end rotation due to bond failure, rebars-slip and inelastic extension, to simulate the deteriorating cyclic behavior of existing pre-cracked beam-column members. For the assessment of frames with substandard exterior beam-column joints, a nonlinear model for the exterior joint is developed and validated through a full-scale quasi-static cyclic test performed on a substandard T-joint connection. The proposed model allows considering structural performance in risk assessment while accounting for true inelastic mechanisms at the joints.

Wheat pollen, characterized by its short lifespan, exhibits rapid germination after anthesis. The preservation of wheat pollen is contingent upon environmental factors, including temperature, relative humidity, light, and wind. The objective is to develop a method for preserving wheat pollen effectively, specifically for the purpose of breeding. The short longevity of wheat pollen grains renders it impractical to conduct tests for pollen viability and in vitro germination on a large scale. Herein, the impact of storage temperatures and duration was assessed on pollen viability and in vitro germination to optimize storage conditions for preserving pollen viability. Pollen grains from 50 diverse spring wheat genotypes, each with three replicates, were harvested and stored at temperatures of 22°C, -20°C, and 4°C. Subsequently, pollen viability and in vitro germination rates were determined after storage of 1, 3, and 6 days. The results revealed that storage temperatures, durations, genotypes, and their interactions had a statistically significant impact on both pollen viability and in vitro germination. Notably, when pollen was kept at 22°C, almost all genotypes exhibited a loss of pollen viability and in vitro germination after 1, 3, and 6 days of storage. Likewise, storage at -20°C failed to extend pollen germination. However, at a storage temperature of 4°C, the pollen of 36 wheat genotypes exhibited a range of 6-14% in vitro pollen germination and remained viable even for 6 days. Simple linear regression analysis further revealed a significant negative correlation between pollen viability, in vitro germination, and storage time and temperature. In conclusion, our findings underscore 4°C as the optimal temperature for preserving pollen viability and in vitro pollen germination in spring wheat for up to 6 days. The results of the present study suggests that pollen viability of wheat is genotype de-pendent, storage temperature and storage duration. Thus, the 36 wheat genotypes identified during the present work could be efficiently maintained at 4◦C for short-term storage (6 days) and could be further used for genetics and breeding purposes.

Nigeria is the most populous country in the African continent. The aim of this study was to analyze risk factors for COVID-19 prevalence and deaths in all 6 geopolitical regions and 37 states in Nigeria. We analyzed the data retrieved from various sources, including Nigeria CDC, Nigeria National Bureau of Statistics, Unicef-Nigeria multiple indicator cluster survey and the Institute of Health Metrics and Evaluation, University of Washington. We examined 4 clinical risk factors (prevalence of TB, HIV, smoking and BCG vaccination coverage) and 5 sociodemographic factors (age ≥65, population density, literacy rate, unemployment and GDP per capita). Multivariate modeling was conducted using generalized linear model. Our analysis showed that the incidence of confirmed COVID-19 cases differed widely across the 37 states, from 0.09 per 100,000 in Kogi to 83.7 in Lagos. However, more than 70% of confirmed cases were concentrated in just 7 states: Lagos, Abuja, Oyo, Kano, Edo, Rivers and Delta. Case mortality rate (CMR) per million population also varied considerably, with Lagos, Abuja and Edo having CMR above 9. On bivariate analysis, higher CMR correlated positively with GDP and to a lesser extent with TB and population density. On multivariate analysis, which is more definitive, states with higher HIV prevalence and BCG coverage had lower CMR, while high GDP states had a greater CMR. This study indicates that COVID-19 has disproportionately affected certain states in Nigeria. Population susceptibility factors include higher economic development but not literacy or unemployment. Death rates were mildly lower in states with higher HIV prevalence and BCG vaccination coverage.

Single cell proteins are the dead dried cells of microorganisms or purified protein isolated from microorganism’s cell culture, used as a food supplement to humans’ food and animals feed. World suffer from malnutrition particularly developing countries, due to rapid increase in population, increased the demand for protein and nutrients requirement. Bacteria is potential microorganism for SCP production due to high protein content, fast generation time, bio-active secondary metabolites production and can grow on various substrates. Actinobacteria species and strain have capability to produce biological active compounds, produced about two-thirds of antibiotics available in the market, actively used as antibiotics, antiprotozoal, antifungal, antiviral, anticancer, anticholesterol, antihelminth and immunosuppressant. Actinomycetes can be used as probiotic as well as single cell protein that will deal with antibiotic as well as protein source.

Producing cherry tomatoes became interesting to know watering volume and growing design on growth, yield, and quality of cherry tomatoes. The research aimed to intend the best treatment for each treatment of watering volume and Growing design on the productivity and quality of cherry tomato cultivar Ruby. The study is an experimental exploration using RCBD factorial. The treatment factors include: Growing Design (greenhouse, Rain shelter, Screen house) and Watering Volume (100% Etc, 75% ETc, 50% ETc). The result showed that root dry weight and root-shoot ratio were found higher in the screen house design, while fruit firmness was higher in the rain shelter design. Considering the effect of watering volume, higher fruit diameter, heavier fruit, fruits per plant, ultimate fruit &amp; biological yield per plant, higher root &amp; shoot biomass, root-shoot ratio, leaf chlorophyll content, greater fruit skin firmness and elasticity was noted in the 100% ETc treatment. In contrast, the growth rate was higher in 50% ETc treatment. Cultivating cherry tomatoes in a greenhouse using a watering volume of 100% ETc under the results is recommended. These conditions have led to better growth, higher fruit yield, and improved fruit quality, making them favorable options for successful cherry tomato production.

This study was conducted to investigate heavy metal contamination and potential health risk of ground water of selected municipal solid waste (MSW) disposal sites of Khyber Pakhtunkhwa (KP) Pakistan. For this purpose a total of 30 composite samples of both surface and ground water were collected from dumpsites of Abbottabad, Bannu and Peshawar. The collected samples were analyzed for physico-chemical parameters and heavy metals by following standard methods. Results indicated that pH values were found within the acceptable limits specified by national environmental quality standards (NEQS) and world health organization (WHO). Mean concentrations of heavy metals were within NEQS and WHO limits, except for Ni which exceeded the NEQS and WHO limit of 0.02 mg/L in all samples, Similarly, Mn exceeded the limit set by NEQS and WHO (0.5 mg/L) in the ground water samples collected from Bannu dumpsite. The multivariate analysis indicated that the heavy metal contamination of the groundwater of the selected dumpsites was anthropogenic. The pollution index (PI) values (PI≥100) of Mn and Ni indicated very high pollution at individual levels while collectively based on heavy metals pollution index (HPI) values (HPI ≥ 200) the ground water of all the selected dumpsites were found highly polluted. Whereas, the hazard index (HI) values (HI ≥ 5) suggested adverse health effects. It was concluded that the ground water of all the dumpsites was highly polluted with heavy metals particularly Ni and Mn thus, posing a high health risk.

In this research work the study of Buongiorno Model Darcy Forchheimer flow of Hybrid nanofluid flow on isothermal permeable stretch/shrink sheet with homogeneous and heterogeneous reaction is investigated. The effects of MHD, thermal radiation, viscous dissipation, Joule heating, and heat generation/absorption are taken into account. Hybrid nanofluids can act as a medium for heterogeneous-homogeneous reactions. The nanoparticles dispersed in the fluid can influence reaction kinetics and species transport, potentially, altering reaction rates and pathways. The applications of HNF in reactions, both homogeneous and heterogeneous, lie in leveraging their enhanced thermal properties, catalytic potential, and improved mixing capabilities to optimize reaction efficiency and control reaction conditions. Similarity transformation is used to convert a set of PDEs into a set of ODEs. HAM is used for the solution of the obtained ODEs system. In a heterogeneous reaction, the concentration gradient is amplified; in a homogeneous reaction, the impact is opposite. Moreover, at higher compositions of HNPs, the concentration and velocity rise while the temperature falls. Furthermore, as the values of homogeneous and heterogeneous reactions increase, the concentration falls. It is reliable with the idea that a greater reaction rate lowers the diffusion rate. Nevertheless, these parameters do not affect temperature or velocity.

In this work, meshless methods are applied for the solution of two-dimensional steady-state heat conduction problems with nonlocal multi-point boundary conditions (NMBC). These meshless procedures are based on multiquadric radial basis function (MQ RBF) and its modified version (i.e. integrated MQ RBF). The proposed meshless methods which were recently published in \cite{Reutskiy2016} is compared with standard collocation method (i.e. Kansa's method). Three different sorts of solution domain are considered in which Dirichlet boundary condition is specified on some part of the boundary and is related to the unknown function values at a discrete set of interior points. The influence of NMBC on the accuracy and condition number of the system matrix associated to the proposed methods is investigated. The sensitivity of the shape parameter is also analyzed in the proposed methods. Performance of the proposed approaches in terms of accuracy and efficiency is confirmed on the benchmark problems.

Antimicrobial resistance (AMR) due to community carriage of antibiotic-resistant bacteria is highly prevalent in the WHO South-East Asia region. One of the major reasons is the misuse of antibiotics in animal farming practices and at community level, which threatens both human and animal health. However, this multifaceted One Health (OH) problem of antibiotic use (ABU) in poultry farms and respective farmers is not well studied in countries like Pakistan. Therefore, we conducted n OH cross-sectional study in rural Punjab to explore the current practices of ABU in poultry and poultry farmers, associated factors, their healthcare-seeking behaviour and biosecurity practices. We found all the participating farmers using antibiotics for poultry, 60% of which were Colistin sulphate and Amoxicillin trihydrate. The significant consumption of antibiotics in poultry farms (60%) and poultry farmers (50%) was without prescription. Most of the farms (85%) had no wastewater drainage system, causing direct shedding of poultry waste and antibiotic residue in the surrounding environment. Lack of farmers’ education, professional farm training and duration of farming experience were the significantly associated factors with ABU and knowledge of AMR. Our study implies the necessity of an integrated OH-AMR policy with the inclusion of farmers’ education, mass awareness, and strict antibiotic usage guidelines.

Organizational diagnosis (OD) is a comprehensive review of an organization's objectives, re-source allocation, and utilization to achieve those objectives. This study employed OD to en-hance the effectiveness of the Department of Special Education within the Government of Punjab. A questionnaire based on Weisbord's six-box organizational model called the Organ-izational Diagnostic Questionnaire (ODQ), was administered to N=1200 participants, consist-ing of heads of top, middle, and bottom tiers at district and tehsil levels of special education schools, centers, and the main office. Out of these, 506 participants voluntarily completed the ODQ survey. The study findings indicated that the employees of the department possess a good understanding of the organization's objectives. However, there is a lack of opportunities for employee participation in departmental discussions, centralized decision-making, irra-tional task distribution, and unsupportive allocation of human resources. Additionally, there is poor communication, unsatisfactory promotions, incentives, and a lack of knowledge shar-ing among employees, as well as poor inter-relationships, conflicts, and ineffective help-seeking mechanisms. The study also revealed low readiness for change in the organization. Respondents' opinions differed significantly based on their qualifications, job experience, years served, and gender. To improve the department's capacity to absorb change, the study recommends enhancing collaboration and inter-departmental communication, soliciting comprehensive input from all tiers, and promoting employee participation, supportive supervision, and communication. The study contributes to the body of knowledge on OD and highlights the need for improved communication, collaboration, and employee participation, as well as a supportive and supervisory support system to enhance the effectiveness of organizations.

Membrane transporters (MTs) are mainly localized at the plasma membrane (PM), tonoplast and vacuolar membrane (VM) of cells in all plant organs. Their work is to maintain the cellular homeostasis by controlling ionic movements across PM channels from roots to upper plant parts, xylem loading and remobilization of sugar molecules from photosynthesis tissues in the leaf (source) to roots, stem and seeds (sink) via phloem loading. The plant’s whole source-to-sink relationship is regulated by multiple transporting proteins in a highly sophisticated manner and driven based on different stages of plant growth and development (PG&D), and environmental changes. The MTs play a pivotal role in PG&D in terms of increased plant height, branches/tiller numbers, enhanced numbers, length and filled panicles per plant, seed yield and grain quality. Dynamic climatic changes disturbed the ionic balance (salt, drought and heavy metals) and sugar supply (cold and heat stress). Due to poor selectivity, some of the MTs also uptake toxic elements in the roots that negatively impact on PG&D, later on also exported to upper parts and then deteriorate the grain quality. As an adaptive strategy, in response to salt and HMs plants activated PM and VM localized MTs that export toxic elements into vacuole, and also translocate in the root’s tips and shoot. However, in case of drought, cold and heat stresses, MTs increased the water and sugar supply to all organs. In this review, we mainly reviewed recent literature from Arabidopsis, halophytes, and major field crops such as rice, wheat, maize and oilseed rape to argue on the global role of MTs in PG&D and abiotic stress tolerance. We also discussed the gene expression level changes and genomic variations within a species as well as within a family in response to developmental and environmental cues.

Yeast extract is widely used in different food industries as a flavoring agent or vitamin supplement. In this study, a process was optimized for the production of yeast extract from Baker’s yeast (Saccharomyces cerevisiae). A glass vessel stirred fermenter was used for the cultivation of yeast biomass. The effect of various physical and chemical factors was evaluated on the production of yeast cells and optimum conditions for the production of maximum yeast biomass were determined. The optimum growth was obtained at 30ºC with pH 4.5 using molasses as a substrate supplemented with urea at 150rpm. Yeast cells were then separated by centrifugation and ruptured and autolysis was observed to be the most feasible method. Among various method employed to dry the yeast extract, spray dryer appeared as most efficient one. Yeast extract obtained after drying was subjected to different analyses and compared with commercial yeast extract. The produced yeast extract was applied in media preparation to grow different microorganisms including yeast, bacteria and fungi and considerable growth was observed. These results indicated that the developed process is a cost effective alternate approach for the production of yeast extract.

3D reconstruction from a single 2D input is a classic problem in the field of computer vision. With the advancements in deep learning, the performance of 3D reconstruction has also significantly improved. The reconstruction task is more difficult for objects with no textures or complex deformations. This paper serves as a review of recent literature on 3D reconstruction from a single view, with a focus on deep learning methods from 2018 to 2021. Due to lack of standard datasets or 3D shape representation methods, it is hard make direct comparisons between all reviewed methods. However, this paper reviews different approaches for reconstructing 3d shape as depth maps, surface normals, point clouds and meshes; along with various loss functions and evaluation metrics used to train and evaluate these methods.

Human displacement is on the rise globally, and the increase in the burden of tuberculosis (TB) is also attributed to migrations worldwide. A significant number of such displacement occur in regions with considerably higher areas of TB burden. Displacements may delay in TB diagnosis and treatment, which possibly will lead to TB transmission among healthy individuals. In this study, we assessed the association of existing determinants after a protracted internal displacement of people with the delay in TB diagnosis and treatment outcomes. A cross-sectional study was conducted on internally displaced TB patients registered at selected health facilities in three urban districts of Pakistan from March 2019 to February 2020. The univariate and multivariate logistic regression model was used to assess the delay in diagnosis and treatment outcomes. IDPs with delay in initiation of treatment beyond 30 days were at high possibility of unsuccessful TB treatment outcomes (adjusted odds ratio AOR,2.60; 95% CI 1.06-6.40). Analysis of factors that affect health seeker behavior and timely treatment showed a significant association (p<0.05) in-between age group 55-65 years (AOR, 2.66; 95% CI 1.00-7.07), female patients (AOR, 2.42; 95% CI 1.21-4.81), visited non-formal health provider (AOR, 8.81; 95% CI 3.99-19.46), self-medication (AOR, 2.72; 95 % CI 1.37-5.37), poor knowledge of TB (AOR, 11.39; 95% CI 3.31-39.1), and perceived stigma (AOR, 8.81; 95% CI 3.99-19.4). Prolong delay in treatment was associated with unfavorable treatment outcomes among IDPs, more specifically. As migrants and IDPs are more likely to experience an interruption in care due to overall exclusion from social and health care services. Therefore, it is imperative to understand the barriers in providing public health care services, particularly in preventing and treating TB.

Inflammatory bowel diseases (IBD), including Crohn's disease and ulcerative colitis, is a disease of chronic inflammatory conditions of the intestinal tract due to disturbance of the inflammation and immune system. Symptoms of IBD include abdominal pain, diarrhea, bleeding, reduced weight, and fatigue. In IBD, the immune system attacks the intestinal tract's inner wall, causing chronic inflammation and tissue damage. In particular, IL-6 and IL-17 act on immune cells, including T cells and macrophages, to amplify the immune responses so that tissue damage and morphological changes occur. Of note, excessive calorie intake and obesity also affect the immune system due to inflammation caused by lipotoxicity and changes in lipids supply. Similarly, individuals with IBD have alterations in liver function after sustained high-fat diet feeding. In addition, excess dietary fat intake, along with alterations in primary and secondary bile acids in the colon, can affect the onset and progression of IBD because inflammatory cytokines contribute to insulin resistance; the factors include the release of inflammatory cytokines, oxidative stress, and changes in intestinal microflora, which may also contribute to the disease progression. However, interfering with de novo fatty acid synthase by deleting the enzyme acetyl-CoA-carboxylase 1 in intestinal epithelial cells leads to the deficiency of epithelial crypt structures and tissue regeneration, which seems to be due to Lgr5+ intestinal stem cell function. Thus, conflicting reports exist regarding high-fat diet effects on IBD animal models. This review will focus on the pathological basis of the link between dietary lipids intake and IBD and cover currently available pharmacological approaches.

Fruit production is an important part of the gross domestic product for many countries around the world especially to those who have a strong focus on agriculture. However, long-term maintenance and yield stability of fruit production may be threatened by the ongoing climate change and its consequences like extended drought periods, heavy rain events, and floodings. Genome editing, with its progressive technological developments, offers opportunities to adapt relevant fruit plant species to new climatic conditions. Among modern genome editing techniques, CRISPR/Cas, in particular, has the potential to support breeding for those fruit plant species with extended breeding cycles, e.g., perennial fruits. In this review, we discuss CRISPR/Cas and other genome editing techniques in detail and how these techniques can be applied to support the breeding of fruit plant species for adaptation to changing climates. The chronological history of CRISPR/Cas9 systems, their associated computational tools, genomic data sources, transformation methods along with their delivery vehicles, quality improvement, environmental-stress resiliency, limitations, and future perspectives will also be discussed with respect to securing future global fruit production.

Our environment has been impacted by man-made pollutants mainly industries make substantial use of synthetic dyes which exhibit cytotoxicity and have significant environmental consequences. Effective photocatalyst-based approaches for degrading synthetic dyes into less toxic chemical are of great interest. Synthesizing NPs using biological approaches, particularly plant-based approaches offer advantages, decreasing the risk of NPs losing biocompatibility during synthesis, cost-effectiveness, and eco-friendliness. In this study, we employed a green synthesis method to produce manganese oxide nanoparticles (MnO NPs) utilizing leaf extract from the Lathyrus Aphaca plant. The synthesized MnOx NPs were characterized through various techniques; X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), Fourier-transform infrared spectroscopy (FTIR), and UV–visible spectroscopy. XRD analysis showed distinct peaks, indicated the presence crystallographic planes within the MnO₂ nanoparticles, thus confirming their crystalline structure. SEM study highlighted closely packed configurations with average size of approximately ≥ 50-70 nm, with well-defined boundaries. EDX analysis showed the presence of elemental manganese (Mn) in the samples, with peaks corresponding to Mn detected at lower energy levels, predominantly represented by MnO. FTIR, showed the presence of the O-O stretching mode at a frequency of 719 cm^-1, the presence of MnO₆ oxides of manganese, and peak at 548 cm^-1 corresponded to the Mn-O stretching mode. Furthermore, the green-synthesized manganese oxide nanoparticles exhibited promising photocatalytic and adsorption capabilities against Methylene Blue (MB) dye, leading to approximately 93.21% degradation of MB when treated with the green-synthesized MnO nanoparticles derived from plant extract. This highlights the efficacy and potential of these nanoparticles in environmental remediation applications, particularly in the degradation of methylene blue contaminants.

Tapping panel dryness (TPD) syndrome is a complex disease of Rubber tree (Hevea brasiliensis L.) which causes cessation of latex drainage upon tapping of rubber tree. Rubber tree virus (RTV1) was identified as a novel pathogen associated with rubber tree and a potential causal agent of TPD. RTV1 is a monopartite RNA virus that is linear, non-enveloped and has a single-stranded (ss) positive RNA genome of approximately 6081 nucleotides and is composed of two major open reading frames (ORFs), ORF1 (polyprotein), and ORF2 (movement protein. This study aimed to investigate the possibility of rubber genome encoded tree microRNAs (miRNAs) as novel therapeutic targets against RTV1 using in silico algorithms. Mature rubber tree miRNAs are retrieved from the miRBase database and are used for hybridization of RTV1 using five different five different computational algorithms including miRanda, RNA22, RNAhybrid and psRNATarget. A total of eleven common rubber tree miRNAs were identified based on consensus genomic positions. The consensus of four algorithms predicted the hybridization sites of hbr-miR396a and hbr-miR398 at common locus positions 6676, 1840 respectively. To validate the prediction, secondary structures of the consensual rubber tree miRNAs and free energy of duplex binding were calculated using the RNAfold and RNAcofold algorithms respectively. We created a plot between rubber tree miRNAs and RTV1 ORFs by using Circos algorithm. In this study, we predicted eleven consensual rubber tree miRNAs. Among these miRNAs, hbr-miR398 was identified as the most effectual miRNA that may target the ORF1 gene of the RTV1 genome. The predicted data will be important in the development of rubber trees resistant to RTV1.

An efficient cooling system is necessary for the reliability and safety of the modern microchips for longer life. As microchips become smaller and more powerful, the heat flux generated by these chips per unit area also rises sharply. Traditional cooling techniques are inadequate to meet the recent cooling requirements of microchips. To meet the current cooling demand of Microelectromechanical devices (MEMS) devices and microchips, microchannel heat sinks (MCHS) technology is the latest invention that can dissipate a significant amount of heat because of its high surface area to volume ratio. This study provides a concise summary of design, material selection, and performance parameters of MCHS that are developed over the last few decades. The limitations and challenges associated with different techniques employed by researchers over time to enhance the thermal efficiency of microchannel heat sinks are discussed. The effects on the thermal enhancement factor, Nusselt number, and pressure drop at different Reynold numbers, in passive techniques (flow obstruction) i.e. ribs, grooves, dimples, and cavities change in curvature of MCHS are discussed. This study also discusses the increase in heat transfer using nanofluids and how change in coolant type also significantly affects the thermal performance of MCHS by obstructing flow. This study provides trends and useful guidelines for researchers to design more effective MCHS to keep up with the cooling demands of power electronics.

Voltage Stability & Control, is very crucial compared to other Power System (PS) Quality and Stability issues. Long-Vertical-Power-Flows in Conventional Grids, causes voltage drops which in turn causes huge power losses, especially in the Medium Voltage (MV) and Low Voltage (LV) Distribution Networks. Such technical losses in abysmally-planned weak distribution networks, lead to substantial loss of revenues to the utility grid. Apart from classic Voltage Regulation (VR) techniques, with the rise of Distributed Generation (DG) based on Renewable Energy Sources (RES), Horizontal-Power-Flows can be introduced in the network, through various Smart Grid techniques. Coupling such sources, near load centers shall mitigate long flows from expensive conventional sources at times of huge demands, improving feeders’ Voltage Profile. This Ancillary Service of Voltage Support from DG RESs shall thereby alleviate revenue losses caused by long-power-flows in weak distribution grids. For a developing country like Pakistan, loss of revenue from an already expensive utility gives huge blow to the economy. So, a similar technique for voltage support is proposed for an 11-kV feeder, which faces similar problem, and the results are remarkable. The technique is implemented using OpenDSS Tool by modelling 3MWp PV Penetration along with some future storage.

In this unprecedented era of computer-supported and distance learning, it is critical to rethink the way students are supported through vital skills like self-regulation and peer collaboration. A variety of digital media has emerged, allowing learners autonomy while requiring the ability to effectively regulate different components of the educational process for long-term academic success. We reviewed collaboration, communication, and self-regulation in digital learning environments as part of online learning. We discussed how these abilities are reflected in highly cited content. High-impact factor studies were identified using advanced software Herzing Publish or Perish to retrieve highly cited research publications metrics. The search resulted in 272 records from 2010 to 2022, 192 duplicates were identified to remove and 48 JCR articles were shortlisted for review. We examined and reflected on sufficient connections to make firm judgments about correlations of concepts. The review identified prominent themes surfaced in the high impact factor academic publication e.g., digital learning environment, interaction, engagement, feedback, self-efficacy, motivation, meta-cognition, achievement, technology, blended learning, and orientation of ICT. Many studies support different features of SRL &amp; PCL through different tools, access to educators or feedback, encouragement, and through peers. However, all of them discuss the processes that students use to self-regulate learning in these situations. It is suggested to examine whether the effectiveness of certain SRL processes varies by online learning mode.

The rapid growth of the elderly population is a major global demographic and social issue. Unfortunately, there is a shortage of pension plans and social se-curity programmes for this population in developing countries which has severe consequences for their quality of life and planetary health (PH) wellbeing. In this article, we aimed to better understand the pension systems in Ghana, Pakistan, and Myanmar, by reviewing the official government materials (such as pension reports) and published literature. We observed several policy implementation gaps and inequity in pension schemes for older people, specifically for informal and private sector workers. Considering the size of formal versus informal economies and the level of development index of each country, we suggest a wide variety of options in pension policies, financing, designing cash benefits and pension payments to cover all older citizens. This article addresses an unmet need of the elderly people, their wider environmental and economic sustainability to ensure social justice and resource utilization. The governments of developing countries should embrace and establish unique, inclusive, and friendly policies encompassing the informal sector to warrant older adults’ functional and planetary wellbeing with dignity and honor.

The wettability of the oil-brine-rock systems is very challenging mainly for the carbonate reservoirs and it plays a significant role to enhance the oil recovery (EOR). Carbonate rocks are mad-up of complex lithology, hence these requires careful treatments in controlling their wetting behavior for enhanced oil recovery. Therefore, it is extremely important to modify their wettability from an oil-wet rock behavior to a water-wet so that the residual oil can be produced efficiently. Thus, the present study has examined the effectiveness of alumina nanofluid as well as a new chemical methyl blue to alter the wettability. The methyl blue is released on massive scale from various industries i.e. pharma, textile and food industry which is a key environmental concern which contaminates the water table. Hence the study, explores the effects of MB and alumina nanofluid on the wettability. The effect of nanofluids formulated via dispersing the alumina nanoparticles in aqueous solutions at various concentration (0. 0.05, 0.3, 0.50, 0.75 and 1.0 wt. %) were tested for wettability modification under different physio-thermal conditions. Subsequently, the wettability change was examined for the samples treated with different concentrations of MB (10, 15, 30, 50 and 100 mg/L) for 7-days at two different temperatures of (25 and 50 0C). The results showed that hydrophobicity of the SML carbonate rock has significantly reversed while treating with alumina nanofluids and MB. Thus, the wettability modification/reversal via treatment of MB and alumina nanofluid can be an effective mechanism to hydrogen injection and for EOR processes.

In this work, we report the engineering of a sub-70 nm nanocomposite of ZnO/Zn2TiO4 using a low-temperature solution-phase method. Titanium isopropoxide and zinc acetate were used as precursors, and isopropyl alcohol and water were used as solvents. The investigation focused on the growth of nanocomposites by varying the concentrations of precursors and surfactants, as well as their efficiency within different pH ranges. All three ZnO/Zn2TiO4 nanocomposites consist of hexagonal wurtzite ZnO and Zn2TiO4 structures in the three nanocomposites. The crystallite size in three ZnO/Zn2TiO4 nanocomposites, with a hexagonal wurtzite ZnO structure, were measured to be 62.67, 40.34, and 39.50 nm. The crystallite size values in three ZnO/Zn2TiO4 nanocomposites were 26.15 nm, 25.36 nm, and 21.24 nm, respectively, with Zn2TiO4. Morphological observations, conducted using FESEM, reveal the formation of three ZnO/Zn2TiO4 nanocomposites across the entire sample. These nanocomposites resemble dispersed cotton packets, with sizes ranging from 18 to 350 nm. Peaks in the range of 610-1250cm-1 are attributed to Ti-O bond formation and peak located at 1350-1450 cm-1 are attributed to Zn-O bond formation. Also, EDX spectrum reveals peaks for various sample components such as Ti, O and Zn. UV spectrums confirmed the formation of three nanocomposite of ZnO/Zn2TiO4 as showing two peaks for each sample. Photocatalytic investigation carried out by analyzing the UV-Visible absorption spectra of methylene blue dye on the surface of ZnO/Zn2TiO4 nanocomposites, dye degradation at various irradiation time intervals, dye degradation at varied catalyst concentrations and the influence of pH on dye-degradation. Furthermore, the said nanocomposites were used to degrade environmental pollutant (Methylene blue dye). Different sets of experiments were conducted under ambient conditions which show an excellent photo catalytic degradation efficiency.

This paper intends to discuss SSLs, how they work, their advantages and drawbacks. It will end with the author’s thoughts on the efficacy of the system and whether it is a viable solution for the majority of network security problems or if those drawbacks prevent that.

Salmonella enterica serovar Typhi, is one of the major infection spreading from consuming contaminated food and water. The poor sanitation is one the major cause for successful infection. S. typhi is responsible for causing typhoid fever, which is a growing public health concern in developing countries. This bacterium has acquired antimicrobial resistance to many promising which is a growing health concern for community. This study is aim to elucidate the molecular complexity of flouroquinolone resistance in S. Typhi isolates (n=286). Genomic data was downloaded from NCBI and analysis was done by Resfinder, MLST, and Pointfinder. Genomic analysis unveils a complex resistance profile, featuring antimicrobial resistance genes (ARG) including blaCTXM-15, blaTEM-1D, catA1, dfrA7, qnrS1, sul1, sul2, and tetA(B). The investigation focuses on mutations in DNA gyrA, parC, and qnrS1 genes which plays an important role in quinolone resistance. Mutation analysis reveals mutations such as DNA gyrA_S83F, DNA gyrA_D87N, DNA gyrA_S83Y, DNA gyrB_S464F, parC_S80I, and parE_L416F with the presence of qnrS1 gene produces resistance against quinolones. The Docking studies was conducted by “Autodock vina” and visualize by “Discovery studio” which demonstrate that these mutations leads to ciprofloxacin resistance, indicating reduced binding affinity, and altered solvent accessibility which indicates the structural changes at mutation sites. This study provides crucial insights into the molecular mechanisms driving flouroquinolone resistance in S. typhi, guiding future strategies to combat antibiotic resistance. Further validation through experimental mutagenesis is recommended, for targeted therapeutic interventions against the mounting threat of antibiotic-resistant S. typhi.

In recent years, numerous topologies of single phase and three phase Field Excited Flux-Switching Machine (FEFSM) have been developed for several applications. Comparative study of three types of single-phase low-priced Field Excited Flux-Switching Machine (FEFSM) is presented in this paper. Both the conventional 8S/4P sub-part rotor design and 6S/3P salient rotor design have an overlapped winding arrangements between armature coil and field excitation coil that depicts high copper losses as well as results in increased size of motor. Additionally, FEFSM with salient structure of the rotor have high flux strength in the stator-core that has much impact on high iron losses. Copper consumption and iron loss being a crucial proportion in total machine losses. Therefore a novel topology of single phase modular rotor field excited FSM with 8S/6P configuration is proposed, which enable non-overlap arrangement between armature coil and FEC winding that facilitates devaluation in the copper losses. The proposed modular rotor design acquires reduced iron losses as well as reduced active rotor mass comparatively to conventional rotor design. It is very persuasive to analyze the best range of speed for these rotors to avoid cracks and deformation, the maximum tensile strength (can be measured with principal stress in research) of the rotor analysis is conducted using JMAG. A deterministic optimization technique is used to enhance the performance of 8S/6P modular rotor design. The electromagnetic performance of conventional sub-part rotor design, F1-A3-3P design and proposed novel-modular rotor design are analyzed by 3D-Finite Element Analysis (3D-FEA), includes flux linkage, flux distribution, flux strength, back-EMF, cogging torque, torque characteristics, iron losses and efficiency.

Worldwide, hypoxia-related conditions, including cancer, COVID-19, and neuro-degenerative diseases, often lead to multi-organ failure and significant mortality. Oxygen, crucial for cellular function, becomes scarce as levels drop below 10 mmHg (<2% O2), triggering mitochondrial dysregulation and activating hypoxia-induced factors (HiFs). Herein, Oxygen nanoBubbles (OnB), an emerging versatile oxygen de-livery platform, implies to offer a novel approach to address hypoxia-related pathologies. This review explores OnB oxygen delivery strategies and systems, including diffusion, ultrasound, photodynamic, and pH-responsive nanobubbles. It delves into the nanoscale mechanisms of OnB, elucidating their role in mitochondrial metabolism (TFAM, PGC1alpha), hypoxic responses (HiF-1alpha), and their interplay in chronic pathologies including cancer and neurodegenerative disorders, amongst others. By understanding these dynamics and underlying mechanisms, this article aims to contribute to our accruing knowledge of OnB and the developing potential in ameliorating hypoxia- and metabolic stress-related conditions and fostering innovative therapies.

Chronic eosinophilic pneumonia (CEP) is an idiopathic disorder characterized by an abnormal and marked accumulation of eosinophils in the interstitial and alveolar spaces of the lung. Idiopathic chronic eosinophilic pneumonia is reported to comprise anywhere from 0-2.5% of cases within the registries of interstitial lung disease. Diagnosis is based on the clinical constellation of symptoms, characteristic radiographic findings and peripheral blood or BAL eosinophilia, in the absence of infection or drug-induced eosinophilia. There is no consensus on the dose and duration of treatment, but most authors recommend initial doses of prednisone at 0.5–1 mg/kg/day with gradual tapering of the dose for total treatment duration of 6–12 months.