In this unprecedented era of computer-supported and distance learning, it is critical to rethink the way students are supported through vital skills like self-regulation and peer collaboration. A variety of digital media has emerged, allowing learners autonomy while requiring the ability to effectively regulate different components of the educational process for long-term academic success. We reviewed collaboration, communication, and self-regulation in digital learning environments as part of online learning. We discussed how these abilities are reflected in highly cited content. High-impact factor studies were identified using advanced software Herzing Publish or Perish to retrieve highly cited research publications metrics. The search resulted in 272 records from 2010 to 2022, 192 duplicates were identified to remove and 48 JCR articles were shortlisted for review. We examined and reflected on sufficient connections to make firm judgments about correlations of concepts. The review identified prominent themes surfaced in the high impact factor academic publication e.g., digital learning environment, interaction, engagement, feedback, self-efficacy, motivation, meta-cognition, achievement, technology, blended learning, and orientation of ICT. Many studies support different features of SRL & PCL through different tools, access to educators or feedback, encouragement, and through peers. However, all of them discuss the processes that students use to self-regulate learning in these situations. It is suggested to examine whether the effectiveness of certain SRL processes varies by online learning mode.

Organizational diagnosis (OD) is a comprehensive review of an organization's objectives, re-source allocation, and utilization to achieve those objectives. This study employed OD to en-hance the effectiveness of the Department of Special Education within the Government of Punjab. A questionnaire based on Weisbord's six-box organizational model called the Organ-izational Diagnostic Questionnaire (ODQ), was administered to N=1200 participants, consist-ing of heads of top, middle, and bottom tiers at district and tehsil levels of special education schools, centers, and the main office. Out of these, 506 participants voluntarily completed the ODQ survey. The study findings indicated that the employees of the department possess a good understanding of the organization's objectives. However, there is a lack of opportunities for employee participation in departmental discussions, centralized decision-making, irra-tional task distribution, and unsupportive allocation of human resources. Additionally, there is poor communication, unsatisfactory promotions, incentives, and a lack of knowledge shar-ing among employees, as well as poor inter-relationships, conflicts, and ineffective help-seeking mechanisms. The study also revealed low readiness for change in the organization. Respondents' opinions differed significantly based on their qualifications, job experience, years served, and gender. To improve the department's capacity to absorb change, the study recommends enhancing collaboration and inter-departmental communication, soliciting comprehensive input from all tiers, and promoting employee participation, supportive supervision, and communication. The study contributes to the body of knowledge on OD and highlights the need for improved communication, collaboration, and employee participation, as well as a supportive and supervisory support system to enhance the effectiveness of organizations.

Optimizing the nitrogen (N) timings and rate can improve nutrient uptake, and nutrient-efficiencies, especially of N in wheat under the changing climate scenario. Climatic stress in the form of high temperature and drought resulted in the decreased crop physiology and, ultimately, grain yield. Taking the example of rainfed wheat, we quantified the impact of N application rates as full and split-dose at three variable sites of rainfed Pothwar, Pakistan by conducting field experiments for two years (2013-14 and 201-15). Treatments include, T1 = Control (No fertilizer applied), full dose of N applied at the time of crop sowing, i.e. T2 = 50 kg N ha^-1, T3 = 100 kg N ha^-1 and T4 = 150 kg N ha^-1 and split application of N at different timings during different stages of the crop called as split application of N, i.e. T5: Application of 50 kg N ha^-1 (15 kg N ha^-1 (Sowing) : 20 kg N ha^-1 (Tillering) :15 kg N ha^-1 (Anthesis), T6: Application of 100 kg N ha^-1 (30 kg N ha^-1 (Sowing): 40 kg N ha^-1 (Tillering) : 30 kg N ha^-1 (Anthesis) and T7: Application of 150 kg N ha^-1(45 kg N ha^-1 (Sowing) : 60 kg N ha^-1 (Tillering) : 45 kg N ha^-1 (Anthesis). Three study sites include viz. Islamabad (High rainfall with optimum temperature), University Research Farm (URF)-Koont (Medium rainfall with moderate temperature), and Talagang (low rainfall with high temperature). Results showed that the highest stomatal conductance (0.80 mole m^-2 sec^-1), net photosynthetic rate (20.07 μmole m^-2s^-1), transpiration rate (9.58 mmole m^-2s^-1), intercellular CO2 concentration (329.25 μmole CO₂ mol^-1 air), SPAD values (58.86 %) and proline contents (35.42 μg g^-1) were obtained for split application of N (T6 = Split N100) compared to control and full dose of N treatments. Among sites, these physiological traits remained highest at Islamabad and lowest at Talagang, while among years, maximum values of the measured parameters were obtained in 2013-14. A similar trend was observed for crop total N, N efficiencies, and agronomic traits of the crop. Our results suggest that optimum N application rate and its suitable timings can help to harvest real benefits of N as in our findings, split dose resulted in the maximum performance of the crop from physiological parameters to the agronomic traits of the rainfed wheat crop.

Peste des Petits Ruminants (PPR), a highly contagious viral disease, causes significant economic losses in sheep and goats. Laboratory diagnosis is crucial to disease control and eradication. Since PPRVs have recently adopted new hosts, genetic diversity within isolates of the same lineage is more likely than if they were host-specific, sheep and goats most often. ELISA detects antibodies and antigens in serology. However, mishandling, environmental conditions (temperature and humidity), storage, and sensitivity issues of commercially available ELISA kits prevent rapid PPR virus detection in third-world countries like Pakistan. In the 2020-21 outbreaks in Pakistan, 325 blood samples, 19 swabs, and 6 virus tissue samples of sheep and goats were collected from Gilgit, Islamabad, and Fateh Jang. These virus isolates were submitted to NCBI for partial N gene sequencing. Antigen was prepared from indigenous virus Using semi-purified antigen from PPRV, an indirect ELISA for the detection of PPR antibodies in goat and sheep serum was developed using MW600922 grown in Vero cells. Dilutions of 1:200 serums and 1:32 antigens improve antibody detection. The N-gene-based analysis revealed a better understanding of PPRV genetic characterization. This study develops an RT-PCR assay to detect PPRV by targeting the N-protein gene. This assay offers an accurate and affordable diagnostic tool for PPRV and partial genome sequencing. Results described that PPRV isolates from the current study have 99.73% and 99.4% similarity to previously published Lahore and Faisalabad isolates from Pakistan, respectively. Compared to previous isolates from NCBI data, the virus showed high divergence rates with the Turkish strain. The comparative analysis between Commercial kit (c-ELISA) and I-ELISA revealed that the former had a high sensitivity of 90.60% and specificity of 85.23% compared with the cELISA kit. By comparing I-ELISA and VNT, we find that the current assay is 100% specific and 82.14 % sensitive. Based on these results, serological surveys for PPR antibodies, on a larger scale, in small ruminants can be conducted with indirect ELISA rather than competitive ELISA. Furthermore, the cost and storage efficiency was highly significant because the currently developed method has a low production cost, which is much lesser than the commercially available kit. Our findings demonstrated a significant breakthrough in terms of cost-effectiveness and storage efficiency, and they are highly recommended for developing countries.

The application of instrumented indentation to assess material properties like Young’s modulus and micro-hardness has become a standard method. In recent developments, indentation experiments and simulations have been combined to inverse methods, from which further material parameters as yield strength, work hardening rate, and tensile strength can be determined. In this work, an inverse method is introduced by which material parameters for cyclic plasticity, i.e. kinematic hardening parameters, can be determined. To accomplish this, cyclic Vickers indentation experiments are combined with finite element simulations of the indentation with unknown material properties, which are then determined by inverse analysis. To validate the proposed method, these parameters are subsequently applied to predict the uniaxial stress-strain response of a material with success. The method has been validated successfully for a quenched and tempered martensitic steel and for technically pure copper, where an excellent agreement between measured and predicted cyclic stress-strain-curves has been achieved. Hence, the proposed inverse method based on cyclic nanoindentation, as a quasi-non-destructive method, could complement or even substitute the resource-intensive conventional fatigue testing in the future for some applications.

Gambogic acid, a common traditional Chinese medicine and widely distributed throughout South China, Vietnam, Cambodia, and Thailand. It is prenylated xanthone which is the significant bioactive compound of gamboge. Gambogic acid is known as a strong apoptotic inducer in cancer cells. It has been found as strong anticancer agent against various types of cancer cells lines such as breast cancer, pancreatic, and cervical cancer. It induces apoptosis, down regulates the anti-apoptotic proteins (survivin and BCL2,) and down regulates the activities of P-glycoprotein in drug sensitive human breast MCF-7 and drug-resistant MCF-7/ADR cells. Similarly, it also exerts alteration in P13K, AKT, p21, MMP-2 &-9, and phosphorylated-AKT expressions. The current review highlights the anticancer and chemo-preventive perspectives of gambogic acid and its mechanistic role against human and animal cancers.

Applications for Wireless Sensor Networks (WSNs) range from monitoring the environment to automating factories. However, sustained and effective functioning is made more difficult by Sensor Nodes (SNs) limited energy supplies in which optimization is the main issue. So with the aim of increasing the lifespan by decreasing the energy consumption of WSN, Low-Energy Adaptive Clustering Hierarchy (LEACH) protocol with Deep Learning (DL) algorithm is analyzed in this paper. LEACH is a hierarchical mechanism that elects Cluster Heads (CHs) and regularly rotates their positions in order to allocate energy use effectively by using the same amount of energy. However, Deep Learning (DL) method is used to further improve energy optimization. In many applications, the types of Deep Learning methods like Artificial Neural Networks (ANNs) have shown to be very useful. Using this method, WSNs may make more efficient decisions that reduce energy consumption. Data aggregation, duty cycling, and transmission protocols may all be optimized by Deep Learning model's ability to recognize patterns and forecast network behavior. This results in lower energy consumption, a longer lifespan for the network, and better overall performance.

This study evaluated the using of machine vision in combination with deep learning to identify weeds in real-time for wheat production system. PMAS-Arid Agriculture university research farm were selected for collection of images (6000 total images) of weeds and wheat crops under different weather condition. During growing season, the database was constructed to identify the weeds. For this study two framework were used TensorFlow and PyTorch under CNNs and Deep learning. Deep learning perfromed better with in PyTourch value as compared to another model in Tensorflow. comparing with other networks such as YOLOv4, we concluded that our network reaches a better result between speed and accuracy. Specifically, the maximum precision of weed and wheat plants were 0.89 and 0.91 respectively with 9.43 ms and 12.38 ms inference time per image (640 × 640) NVIDIA RTX2070 GPU.

Failaka Island is located 20 kilometers east of the Kuwait mainland. The island includes archaeological sites dating back to the Bronze, Hellenistic, Christian, and Islamic ages. To develop the island as a tourist attraction the state is pursuing a new urban plan based on the island's environmental potential. This study is the basis of the urban plan depends on environmental criteria from the view of Geoarchaeology. The study analysis the land-use and land-cover changes of Failaka Island between 1958- 2018. It provides a topographic survey of the island's coastline and a classification of its geomorphological features and a state of the art identification of its archaeological sites by using a drone to make a terrain model. The study used a medium to high-resolution image analysis of the land-use and land-cover changes: WorldView2-50cm 2010 and 2018; Landsat 8; aerial photography; Drone images and a digital elevation model (DEM), to analysis the expected sea level changes by the end of this century. This study also created a geodatabase of the island that can be adapted for future studies. The results emphasize the importance of preserving the historical and ecological features of the island while developing its infrastructure.

Developing countries like Pakistan is among those where lack of adoption to science and technology advancement is a major constraint for Satellite Remote Sensing use in crops and land use land cover digital information generation. Exponential rise in country population, increased food demand, limiting natural resources coupled with migration of rural community to urban areas had further led to skewed official statistics. This study is an attempt to demonstrate the possible use of freely available satellite data like Landsat8 under complex cropping system of Okara district of Punjab, Pakistan. An Integrated approach has been developed for the satellite data based crops and land use/cover spatial area estimation. The resultant quality was found above 96% with Kappa statistics of 0.95. Land utilization statistics provided detail information about cropping patterns as well as land use land cover status. Rice was recorded as most dominating crop in term of cultivation area of around 0.165 million ha followed by autumn maize 0.074 million ha, Fallow crop fields 0.067 million ha and Sorghum 0.047 million ha. Other minor crops observed were potato, fodder and cotton being cultivated on less than 0.010 million ha. Population settlements were observed over an area of around 0.081 million ha of land.

The emerging wireless energy transfer technology enables sensor nodes to maintain perpetual operation. However, maximizing the network performance while preserving short charging delay is a great challenge. In this work, a Wireless Mobile Charger (WMC) and a Directional Charger (DC) are deployed to transmit wireless energy to the sensor node to improve the network's throughput. To the best of our knowledge, this is the first work to optimize the data sensing rate and charging delay by joint scheduling of MC and DC. We prove we can transmit maximum energy to each sensor node to obtain our optimization objective. In our proposed work, a DC selects a total horizon of equipped with DCs, which selects the horizon of each specific area with based on its antenna orientation. DC's orientation is scheduled for each time slot. Furthermore, multiple MCs are used to transmit energy for sensor nodes which cannot be covered by DCs. We divided the Rechargeable Wireless Sensor Network into several zones via the Voronoi diagram. We deployed a static DC and one MC charging location in each zone to provide wireless charging service jointly. We obtain the optimal charging location of MCs in each zone by solving Mix Integral Programming for energy transmission. The optimization objective of our proposed research is to sense maximum data from each sensor node with the help of maximum energy. The lifetime of each sensor network can increase, and the end delay can be maximized with joint energy transmission. Extensive simulation results demonstrate that our RWSNs are designed significantly to improve network lifetime over the baseline method.

Rice grassy stunt virus (RGSV) a member of Tenuivirus family, is very potent and destructive which effects rice crop in many countries, particularly China. Non coding RNAs have important functions in development and epigenetic regulation of gene expression in numerous organsisms. There is three type of small non coding RNAs have been found in eukaryotes, which are small interferring RNAs (siRNAs), microRNAs (miRNAs) and piwi interacting RNAs (piRNAs). Small RNAs (sRNAs) origination is from the infecting virus which is known as virus-derived small interfering RNAs (vsiRNAs), has responsibility for RNA silencing in plants. Virus-induced gene silencing (VIGS) is mainly dependent on RNA silencing (RNAi). Interestingly, RNA silencing happens in plants during viral infections. RNAi technique showed significant results in Nephotettix cincticeps. RNAi technique demonstrated the gene silencing of planthopper Nilaparvata lugens. The proteins P5, pcf4, Dnj, psn5, and pn6 act as potential movement proteins and serve as silencing suppressors for RGSV. VsiRNAs originate from dsRNA molecules which require Dicer-like (DCL) proteins, RNA dependent RNA polymerase (RdRP) proteins, and Argonaute (AGO) proteins. RdRP uses ssRNA for perfect RNA amplification process and can also be used for DCL dependent secondary vsiRNA formation. VSRs interfere with the movement of signals during silencing mechanism. Moreover, intercellular movement of viruses is facilitated by virus-encoded movement protein. RNAi is found in many eukaryotes which are related to transcriptional or post-transcriptional regulation by gene suppression. Transcription is bidirectional in ssDNA viruses which are originated from dsRNA molecules. In this review, we highlighted the biology of Rice grassy stunt virus and its insect vector and its silencing suppressors. This work will be helpful for plant virologists to understand the whole biogenesis mechanism for rice viruses especially RGSV.

Social media platforms are not serving only as tools of communication rather they are acting like intricate systems managing our interactions. A major setback to our interactions occur when the flow of information in these networks gets distorted through polarization. It resembles a society where every debate turns into divide. Our research focuses exclusively on quantifying polarization as well as solving this issue head-on. In order to accurately gauge polarization, we’ve developed a new method that takes into consideration majority of its influencing factors. This helps us in correctly quantifying the polarization value of a given network and then by proposing it as an optimization problem we are attempting to maximally decrease polarization while staying within the set budget. We test our method on synthetic and real-world data sets, and find out that polarization is declining, and diversity is increasing. This proves that our recommendation engine has a penchant for finding the ideal connections between the nodes to start a dialogue. Our research presents a successful tactic to quantifying and reducing polarization in social media networks. The results indicate that our novel metric and intervention technique are effective in dismantling echo chambers, thereby promoting diversity in these networks.

The world is growing very rapidly concerning technology. In the next-generation Internet, the existing architecture requires to be upgraded from Host-Centric Networking paradigm to Information-centric networking architecture. The unique aspect of information-centric networking is in-network cashing. Due to the system augmentation and In-network cashing technique, this novel system needs extremely high content security to ensure system integrity and maintenance. 5G network may be supported by the Information-Centric Network due to its high data transmission rate. In order to handle the serious security issues such as attack on confidentiality, authentication and integrity of the content, a Digital Signature based Access Control Mechanism in Information-Centric Network (DSAC) scheme is proposed to enhance security of ICN. Briefly, this new scheme uses Digital Signature, hash function, Trusted Third Party (TTP) and Proxy TTP. The client request for content, after receiving a request, the content provider generates and encrypts content with the digital signature and random value ‘k’ hash function and send it to TTP. After the signing process, the TTP sends the encryption hash key to Proxy TTP. In this proposed scheme authentication, confidentiality, the integrity aspects of the content security are improved.

The contextual and risk perception of climate change plays a critical role in an individual’s decision-making process. It could also help people to respond appropriately to the consequences of global climate change and eventually take necessary adaptation actions. However, the perceptions of climate change are often gendered and vary among men and women. Therefore, this study explores different perceptions of climate change and its local adaptation options among ultra-poor vulnerable women, particularly in highly vulnerable flood-prone regions of Bangladesh. The research followed an empirical research methodology to collect primary and secondary information using qualitative and quantitative research tools. The study findings reveal that climate change perceptions at the individual level are relatively low (63%). Still, they have been observing significant changes in various climatic variables over the past 30 years. Moreover, this study identified some major adaptation options such as plinth raising (100%), livestock rearing (100%), homestead gardening (82%), seasonal migration (82%), and using indigenous knowledge (69%), and so on to tackle the adverse impacts of climate change-induced extreme events including flooding at the local level. For implementing these adaptation measures, the respondents spent a significant amount of financial resources from individual sources in the study area. Structural Equation Modeling (SEM) is used in addition to the statistical analyses to understand any connections between the climate change perceptions and other variables associated with the community under study. The SEM result shows that climate change will be a long–term problem, which offers a strong predictor in this model, considering standardized regression weight β= 0.56. It means, despite inadequate knowledge on climate change of the respondent’s, climate change is occurring and becoming the worst factor limiting cultural, economic, and environmental development in the study area.

The SARS-CoV-2 was confirmed to cause the regional outbreak of coronavirus disease 2019 (COVID-19) in Wuhan, China. The 3C-like protease (3CL^pro), an essential enzyme for viral replication, is a valid target to compacts SARS-CoV and MERS-CoV. In this research, an integrated library consisting of 1000 compounds from Asinex Focused Covalent (AFCL) library and 16 FDA-approved protease inhibitors were screened against SARS-CoV-2 3CL^pro. Top compounds with significant docking scores and making stable interactions with catalytic dyad residues were obtained. The screening results in identification of compound 621 from AFCL library as well as Paritaprevir and Simeprevir from FDA-approved protease inhibitors as potential inhibitors of SARS-CoV-2 3CL^pro. The mechanism and dynamic stability of binding between the identified compounds and SARS-CoV-2 3CL^pro were characterized using 50 nanoseconds (ns) molecular dynamic (MD) simulation approach. The identified compounds are potential inhibitors worthy of further development as SARS-CoV-2 3CLpro inhibitors/drugs. Importantly, the identified FDA-approved therapeutics could be ready for clinical trials to treat infected patients and help to curb the COVID-19.

The contemporary landscape of eHealth is characterized by major concerns related to electronic medical records (EMRs). In an EMR, critical patient health information gets its own repository, which is the core of the eHealth system. Notably, the EMR not only retrieves health information generated in ambulatory clinical settings but also includes court-generated records. These overlapping records assume the role of a foundational data source for a comprehensive electronic health record (EHR). This scholarly review sheds light on recent trends in medical records and associated challenges, while at the same time providing insights into Saudi Arabia’s targeted approaches to healthcare delivery. Additionally, the talk expands to include a description of blockchain technology and its underlying conceptual framework. This demonstration positions blockchain technology as a promising approach that requires consideration for future use in the healthcare system.

Yeast extract is widely used in different food industries as a flavoring agent or vitamin supplement. In this study, a process was optimized for the production of yeast extract from Baker’s yeast (Saccharomyces cerevisiae). A glass vessel stirred fermenter was used for the cultivation of yeast biomass. The effect of various physical and chemical factors was evaluated on the production of yeast cells and optimum conditions for the production of maximum yeast biomass were determined. The optimum growth was obtained at 30ºC with pH 4.5 using molasses as a substrate supplemented with urea at 150rpm. Yeast cells were then separated by centrifugation and ruptured and autolysis was observed to be the most feasible method. Among various method employed to dry the yeast extract, spray dryer appeared as most efficient one. Yeast extract obtained after drying was subjected to different analyses and compared with commercial yeast extract. The produced yeast extract was applied in media preparation to grow different microorganisms including yeast, bacteria and fungi and considerable growth was observed. These results indicated that the developed process is a cost effective alternate approach for the production of yeast extract.

This study was carried out to formulate and evaluate controlled release (CR) matrix tablets of Acyclovir using combination of hydrophilic and hydrophobic polymers. Acyclovir is a guanine derivative and is its half-life is short hence administered five times a day using immediate release tablets. Six formulations (F1-F6) were developed using Ethocel and Carbopol in equal combinations at drug-polymer (D:P) ratio of 10:5, 10:6, 10:7, 10:8, 10:9 and 10:10. Solubility study was performed using six different solvents. The compatibility studies were carried out using FTIR and DSC. According to USP, Quality Control and dimensional tests (hardness, friability, disintegration and thickness) were executed. In-vitro drug release studies of Acyclovir was carried out in dissolution apparatus using using 0.1 N HCl medium at constant temperature of 37 ± 0.5 ºC. In order to analyze the drug release kinetics, five different mathematical models were applied to the release data. The results showed that there was no incompatibility between drug and polymers. Physical QC tests were found within limits of USP. The release was retarded upto 24 hrs and non-fickian in-vitro drug release mechanism was found. A formulation developed using blend of polymers, showed excellent retention and desired release profiles thus providing absolute control for 24 hrs.

Patients satisfaction with fast and high-quality services is the most important in the healthcare settings and specially in outpatient departments and private clinics. High quality services on health sector are indicated by continuous quality improvement (CQI). CQI is a progressive incremental process focused on safety of all participants, outcomes, systematic process, regulated and improved working environment at the later than earlier stages. Among the various suggested strategies, we adopted the patents feedback to improve the quality of services our clinic. All of the patient visited hospital were sent a massage on mobile and requested to provide their feedback on our services. Roughly around 5% of all visitors responded and filled up questionnaire. Majority of them were satisfied with the services in various department. However, they provided us some suggestions to identify the further gaps and improve the services in improving patients experience at our clinic. We considered their feedback, identified problems, redesigned the policies and implemented. After implementation of new strategies, we preliminary again evaluated the patients’ feedback on our services. Patients feedback explores that optimized methods of services for the has considerably increased the patients’ satisfaction. Taken together, our this shows that patients’ feedback is very important factor to improve patients’ experience at outpatient clinics using continuous quality improvement tools. For that reason, this study would serve as reference for public health stack holders, administrators and researchers.

The emergence of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) linked with coronavirus disease 2019 (COVID-19) poses a serious threat to public health worldwide. Firstly, the SARS-CoV-2 was reported in Wuhan, Hubei Province, China in December 2019. Initially, the major proportion of virus-infected cases (i.e. about 99%) was reported in China and now it is being reported in other counties as well. Humans begin to be infected within their communities and transmittance of the viral epidemic increased rapidly due to lack of understanding of its transmission routes and precautionary measures. The existence of SARS-CoV-2 in China threatened the population greatly due to the high incidence of fatal respiratory infections. Current investigations speculated that this virus transferred into a human from viral-infected bats. However, the process of interspecies viral transmission is an important scientific question to be addressed. Due to the continuous increase in the patients infected with COVID-19 associated pneumonia, the World Health Organization (WHO) has included this viral epidemic to the priority list of diseases. Therefore, accelerated research developments are required to control the spread of this outbreak, as it is declared as a public health emergency by WHO especially in the absence of efficacious drugs and vaccines. Our review encompasses the recent status of disease severity in China, a particular replication mechanism of SARS-CoV-2 and potential risks and precautionary measures required to avoid contact with this fatal viral infection.

COVID-19 outbreak started in the Chinese city of Wuhan and spread around the globe in months due to its high contagious level. Hence, this disease posed a great challenge to researchers and mathematicians. Numerous mathematical models have been suggested to visualize the spreading speed and trends of this pandemic. In this paper, a comparison of a widely established and accepted method, the Susceptible-Exposed-Infected-Quarantined-Recovered-Death-Insusceptible (SEIQRDP) model with a newly-proposed fractional-order SEIQRDP is studied. Densely populated Countries of Asia (Pakistan, India, and Bangladesh) have been chosen as data sets and both algorithms have been applied to their data. The same comparison technique has also been used on the data of two polar countries, New Zealand and Russia, that validated our findings. Error comparison of both algorithms has been recorded in a tabulated form which shows multi-fold erroneous trends over WHO data of selected countries.

This review focuses on the therapeutic effects of metallic ions when released in physiological environments. Recent studies have shown that metallic ions like Ag+, Sr2+, Mg2+, Mn2+, Cu2+, Ca2+, P+5, etc., have shown promising results in drug delivery systems and regenerative medicine. These metallic ions can be loaded in nanoparticles, mesoporous bioactive glass nanoparticles (MBGNs), hydroxyapatite (HA), calcium phosphates, polymeric coatings, and salt solutions. The metallic ions can exhibit different functions in the physiological environment such as antibacterial, antiviral, anti-cancer, bioactive, biocompatible, and angiogenic effect. Furthermore, the metallic ions can be loaded in scaffolds to improve osteoblast proliferation, differentiation, bone development, fibroblast growth, and improved wound healing efficacy. Moreover, different metallic ions possess different therapeutic limits. Therefore, further mechanisms need to be developed for the highly controlled and sustained release of these ions. This review paper summarizes the recent progress in the use of metallic ions in regenerative medicine and encourages further study of metallic ions as a solution to cure diseases.

Background/Objectives: This study aimed to identify various risk factors associated with breast cancer and explore different treatment strategies based on socio-economic, hormonal, and clinical perspectives.; Methods: We analyzed socio-economic, hormonal, genetic, and clinical variables using data from 356 questionnaires obtained from breast cancer patients at Hassan II Regional Hospital in Agadir, Morocco ; Results:The study reveals that the average age of breast cancer patients is 50 ± 10.72 years, with a mode of 47 years and an age range from 29 to 94 years. Notably, women aged 38 are most frequently diagnosed with triple-negative breast cancer. Significant socio-economic trends were observed among the participants, with the majority being housewives (91%) and nearly half residing in rural areas (48.60%). High rates of illiteracy (74.72%) and financial difficulties (54.2%) pose challenges in accessing healthcare services. Psychological distress is prevalent, with 40.7% experiencing anxiety and 30.1% experiencing sadness. The use of oral contraceptives varies, with implications for breast cancer risk. Additionally, statistics on menarche and menopause suggest hormonal influences on breast cancer development. Histological analysis indicates a predominance of grade II invasive ductal carcinoma and left breast localization. Metastases are present in nearly 38.20% of cases. Notably, surgery as the primary treatment effectively treats medium-sized tumors while limiting metastasis. Furthermore, a comparison of treatment strategies reveals a preference for letrozole among postmenopausal patients and tamoxifen among premenopausal patients; Conclusions:These findings highlight the complexity of breast cancer risk factors and therapeutic approaches, emphasizing the importance of personalized care and targeted interventions.

Rice wheat cropping system prevailed in more than fifty percent areas of rice belt of central and upper Punjab. In this area yield of wheat is curtailed every year due to late harvesting of rice crop. In addition to this, lack of machinery for direct sowing of wheat into combine harvested rice is a major limitation for timely wheat sowing due to presence of heavy straw load dropped by the combine harvester. A field experiment was planned and executed during two consecutive years 2017-18 and 2018-19 at Agronomic Research Station Farooqabad to evaluate the various stubble management techniques for the sowing of wheat in a rice-wheat cropping system. The Experiment consist of four treatments Happy seeder (Zero tillage), conventional sowing without burning of rice stubble, Rotavator two times, and Conventional sowing with the burning of rice stubble. The trail was arranged as a Randomized Complete Block Design with four replications having a net plot size of 8 m x 20 m. The Treatments have significant effects on Plant height, Number of productive tillers, 1000- grain weight, and grain yield. Maximum plant height (94.74 and 94.25 cm), numbers of productive tillers/m2 (324.00 and 322.25), 1000-grain weight (36.35 and 36.20 g), grain yield (3780 and 3613 kg/ha), and benefit-cost ratio (2.54 and 2.43) were recorded from the treatment happy seeder (Zero tillage) during both years respectively. It is concluded that the sowing of wheat with a happy seeder (Zero tillage) is an appropriate technique in the rice-wheat cropping system by protecting the environment and soil health from the burning of rice stubbles.

Nigeria is the most populous country in the African continent. The aim of this study was to analyze risk factors for COVID-19 prevalence and deaths in all 6 geopolitical regions and 37 states in Nigeria. We analyzed the data retrieved from various sources, including Nigeria CDC, Nigeria National Bureau of Statistics, Unicef-Nigeria multiple indicator cluster survey and the Institute of Health Metrics and Evaluation, University of Washington. We examined 4 clinical risk factors (prevalence of TB, HIV, smoking and BCG vaccination coverage) and 5 sociodemographic factors (age ≥65, population density, literacy rate, unemployment and GDP per capita). Multivariate modeling was conducted using generalized linear model. Our analysis showed that the incidence of confirmed COVID-19 cases differed widely across the 37 states, from 0.09 per 100,000 in Kogi to 83.7 in Lagos. However, more than 70% of confirmed cases were concentrated in just 7 states: Lagos, Abuja, Oyo, Kano, Edo, Rivers and Delta. Case mortality rate (CMR) per million population also varied considerably, with Lagos, Abuja and Edo having CMR above 9. On bivariate analysis, higher CMR correlated positively with GDP and to a lesser extent with TB and population density. On multivariate analysis, which is more definitive, states with higher HIV prevalence and BCG coverage had lower CMR, while high GDP states had a greater CMR. This study indicates that COVID-19 has disproportionately affected certain states in Nigeria. Population susceptibility factors include higher economic development but not literacy or unemployment. Death rates were mildly lower in states with higher HIV prevalence and BCG vaccination coverage.

As Alberta increases solar power generation, land use conflicts with agriculture increase. A solution that enables low-carbon electricity generation and continued (in some cases increased) agricultural output is the co-locating of solar photovoltaics and agriculture: agrivoltaics. This study reviews policies that impact the growth of agri-voltaics in Alberta. Solar PV-based electricity generation is governed by three regula-tions based on system capacity. In addition, agrivoltaics falls under various legisla-tions, frameworks, and guidelines for land utilization. These include Land Use Frame-work, Alberta Land Stewardship Act, Municipal Government Act, Special Areas Dis-position, Bill 22 and other laws/policies all of which are reviewed in the context of agrivoltaics. Several policies are recommended to support rapid diffusion of agrivolta-ics. First, open access research into agrivoltaics, which not only will help optimize agrivoltaic systems for the region, but also coupled with public education is expected to galvanize social acceptability of large-scale PV deployment. Clearly defining and categorizing agrivoltaic technology, developing agrivoltaic standards, making agri-voltaic technology-friendly regulations/frameworks and developing programs and pol-icies to incentivize agrivoltaic deployment over conventional PV will all accelerate dif-fusion. Through these measures, Alberta can achieve conservation and sustainability in food and energy sector while simultaneously addressing the renewable energy and climate-related goals.

Copper indium gallium selenide (CIGS) is an inexpensive material that has the potential to dominate the next-generation photovoltaic (PV) industry. Here we detail computational investigation of CIGS solar cell with encouragement of adopting cuprous dioxide (Cu₂O) as a Hole Transport Layer (HTL) for efficient fabricated CIGS solar cells. Although Cu₂O as a HTL has been studied earlier for perovskite and other organic/inorganic solar cell yet no study has been detailed on potential application of Cu₂O for CIGS solar cells. With the proposed architecture, recombination losses are fairly reduced at the back contact and contribute to enhanced photo-current generation. With the introduction of Cu₂O, the overall cell efficiency is increased to 26.63%. The wide-band of Cu₂O pulls holes from the CIGS absorber which allows smoother extraction of holes with experiencing lesser resistance. Further, it was also inferred that, HTL also improves the quantum efficiency (QE) for photons with large wavelengths thus increases the cell operating spectrum.

Partial shading on solar photovoltaic (PV) arrays is a prevalent problem in photovoltaic systems that impair the performance of PV modules and is responsible for reduced power output as compared to that in standard irradiance conditions thereby resulting in the appearance of multiple maximas on panel output power characteristics. These maxims contribute to mismatch power losses among PV modules. The mismatch losses depend on shading characteristics together with different interconnected configuration schemes of PV modules. The research presents a comparative analysis of partial shading effects on a 4 x4 PV array system connected in series(S), parallel (P), serries-parallel (SP),total-cross-tied (TCT),central-cross-tied(CCT),bridge-linked(BL),bridge-linked total cross-tied (BLTCT) ,honey-comb(HC), honey-comb total-cross-tied (HCTCT) and ladder (LD) configurations using MATLAB/Simulink. The PV module SPR-X20-250-BLK was used for modeling and simulation analysis. Each module is comprised of 72 number of PV cells and a combination of 16 PV modules was employed for the contextual analysis. Accurate mathematical modeling for the HCTCT configuration under partial shading conditions (PSCs) is provided for the first time and is verified from the simulation. The different configuration schemes were investigated under short-narrow,short-wide,long-narrow,long-wide, diagonal, entire row distribution, and entire column distribution partial shading condition patterns with mathematical implementation and simulation of passing clouds. The performance of array configurations is compared in terms of maximum power generated ), mismatch power loss (∆), relative power loss ) and the fill factor (FF). It was inferred that on average, TCT configuration yielded maximum power generation under all shading patterns among all PV modules interconnection configurations with minimum mismatch power losses followed by hybrid and conventional PV array configurations respectively.

Cardiopulmonary resuscitation (CPR) is a widely practiced lifesaving skill. Conventional CPR is based on manual chest compressions and delivering mouth-to-mouth breaths. There has been advancement in biomedical technology over the last few decades which has led to the introduction of new techniques and devices in CPR as well. In light of these advancements, we propose SMEAR (Standard, Mechanical, ECMO Assisted, Augmented virtual and Remote) classification system to provide structured overview from traditional to novel methods and devices. The standard or Manual CPR, widely practiced by the general public during out-of-hospital cardiac arrests, combines active chest compressions with or without mouth breathing. However, to enhance CPR’s efficacy, various mechanical devices have been developed, encompassing Active Chest Compression, Passive Decompression, and those integrated with Automated External Defibrillators. Feedback sensor-equipped devices, include the Metronome, Accelerometer, Barometer, and Triaxial Field Induction. Mechanical devices, classified by their compression mechanisms, can be isolated – like the Piston-driven, Load-distributing, and Active Compression-Decompression (ACD) – or combined, as in ACD-ITV (Impedance Threshold Device), ACD-IAC (Interposed Abdominal Compression), and ACD-ITV-EECP (Enhanced External Counter Pulsation). Beyond mechanics, Extracorporeal CPR offers veno-arterial Extracorporeal Membrane Oxygenation in refractory cardiac arrest and can improve outcomes. Augmented Virtual Reality usage in training and provision of CPR is at the early stages. It has the potential of expanded usage in training public to provide high-quality CPR. A provider can be remotely guided step by step via telephone or smartphone applications, ensuring continuous support until professional assistance arrives.

Aerosol Optical Thickness (AOT) is one of the critical factors for global atmospheric conditions, climate change, and air pollution. AOT has been exposed as a major component of air pollution in Bangladesh. This paper aims to map the seasonal distribution of AOT from 2002-2022 and to explore the internal relationship between AOT and ten air pollutants using remote sensing and machine learning tools. These ten air pollutants are Particulate matter (PM2.5), Methane (CH4), Carbon monoxide (CO), Nitrogen dioxide (NO2), Formaldehyde (HCHO), Ozone (O3), Sulfur dioxide (SO2), Aerosol Particulate Radius (APR), Nitrogen oxide (NOx) and Black carbon (BC). The results show that the concentrations of AOT were higher in December-January-February (mean value 0.50) and March-April-May (mean value 0.50) seasons, mostly in the central, western, and southern parts of Dhaka, Narayanganj, and Munshiganj districts. AOT was a bit less in June-July-August (mean value 0.33) and September-October-November (mean value 0.37). This paper also revealed that the AOT was correlated positively with PM2.5 (0.60), CH4 (0.80), NO (0.76), and BC (0.83) while correlated negatively with CO (-0.66), HCHO (-0.16), SO2 (-0.41), APR (-0.48), and NOx (-0.20). From the machine learning, the Rational quadratic GPR (RME-0.0024, MAE-0.0015, R2-0.96), Matern 5/2 GPR (RMSE-0.0023, MAE-0.0015, R2-0.96), and Squared Exponential GPR (RMSE-0.0015, MAE-0.0015, R2-0.96) were found good classifiers to predict AOT. UN agencies, government line departments, and local and regional development councils for air pollution mitigation and long-term protective measures may use the paper's key results.

Voltage Stability & Control, is very crucial compared to other Power System (PS) Quality and Stability issues. Long-Vertical-Power-Flows in Conventional Grids, causes voltage drops which in turn causes huge power losses, especially in the Medium Voltage (MV) and Low Voltage (LV) Distribution Networks. Such technical losses in abysmally-planned weak distribution networks, lead to substantial loss of revenues to the utility grid. Apart from classic Voltage Regulation (VR) techniques, with the rise of Distributed Generation (DG) based on Renewable Energy Sources (RES), Horizontal-Power-Flows can be introduced in the network, through various Smart Grid techniques. Coupling such sources, near load centers shall mitigate long flows from expensive conventional sources at times of huge demands, improving feeders’ Voltage Profile. This Ancillary Service of Voltage Support from DG RESs shall thereby alleviate revenue losses caused by long-power-flows in weak distribution grids. For a developing country like Pakistan, loss of revenue from an already expensive utility gives huge blow to the economy. So, a similar technique for voltage support is proposed for an 11-kV feeder, which faces similar problem, and the results are remarkable. The technique is implemented using OpenDSS Tool by modelling 3MWp PV Penetration along with some future storage.

Dataspaces are decentralized and open ecosystems that guarantee trustworthy and secure sharing of data among their participants. In recent years, dataspaces have gained popularity due to their design for managing and sharing heterogeneous data from various sources and domains; and their capability to incrementally solve data integration issues. Leveraging dataspace and advanced technologies plays a vital role in solving many real-world applications effectively and efficiently in real-time. Drone technology is one type of technology that can be deployed to gather data from different resources in harsh or smart environments. Beyond fifth-generation (B5G) communication networks significantly contribute to drones’ development and widespread use by providing low latency and high throughput. Therefore, data sharing among drones in B5G networks offer significant potential to enhance commercial and civilian applications. However, several security issues for collaboration and data sharing, such as data privacy leakage, because of sensitive data and the lack of trustworthy centralized monitoring. Furthermore, sharing data is one of the essential requirements for drone collaboration to achieve their tasks effectively and efficiently in real-time. This conceptual framework presents a novel dataspace in the sky, focusing on securing drone data sharing in B5G for Industry 4.0 toward Industry 5.0. We present how Federated Learning (FL) assists drones in collaboration effectively and efficiently, sharing models instead of raw data. However, because of the fragility of the central curator, the reliability of contribution recording, and the poor quality of shared local models, there are still significant security and privacy issues for drone-assisted smart environments in B5G. Therefore, we present the conceptual framework for leveraging blockchain and FL to secure and manage data sharing of collaborative drones’ dataspace in space in a decentralized fashion. The decentralisation of dataspaces would significantly expand the drive and market for the development of citizen-friendly mobility services.

Sustainable Humanitarian logistics is gaining attention due to increased disasters. It involves various operations to support people's survival efforts. Key characteristics include unpredictable demand, sudden large demand volumes, high stakes in delivery timeliness, and limited resources. However, the complexity and unpredictability of disaster scenarios necessitate robust and adaptable performance measurement models to evaluate the effectiveness of sustainable humanitarian relief logistics (SHRL). This study proposes a novel performance measurement model for sustainable humanitarian logistics and supply chains that integrates the Fuzzy Delphi Method (FDM) and Fuzzy Decision-Making Trial and Evaluation Laboratory (Fuzzy-DEMATEL) method. In this research, using 115 articles focused on sustainable humanitarian logistics and supply chains, crisis management, and humanitarian aid, this research identified 25 key performance indicators (KPIs) in the initial phase. Following the implementation of FDM, 19 KPIs were identified as crucial for further analysis. These KPIs were then divided into four distinct categories: "Quality," "Accountability," "Operational Excellence," and "Sustainability". Initially, FDM is utilized to reach a consensus among experts concerning KPIs for humanitarian logistics and supply chains. By incorporating the inherent uncertainty and vagueness in expert judgments, FDM refines the list of key performance indicators that reflect the real-life conditions and constraints in disaster operations. Finally, the fuzzy DEMATEL approach was used to analyze interrelationships among factors, identifying cause-and-effect behavior and ranking them, forming a robust theoretical framework. The study concludes with the development of a comprehensive performance measurement model that facilitates the strategic planning and operational assessment of humanitarian organization operations. The integration of FDM and fuzzy DEMATEL methods offers multiple perspectives for decision-making and helps stakeholders identify critical areas for improvement. Based on the acquired results, the KPIs attached to the Quality (P1) aspect of the proposed framework have gained significant importance and main cause in the cause-and-effect relationship which impacts and is helpful to improve the performance of humanitarian organizations in all phases of disaster management. The KPIs prompt delivery (D1), and delivery accuracy (D2) are more significant, while capacity building and training (D19) and delivery compliance (D15) are least significant in SHRL scenarios. This research is expected to support humanitarian organizations in enhancing their capabilities, thereby improving the effectiveness and efficiency of aid delivery in disaster-stricken areas.

Rigid pavements at military airfields experience surface deterioration within 6-18 months of construction. The cause of this degradation is mainly due to combined exposure to repeated heat shocks from jet engine exhaust and spilled aviation oils (hydrocarbons). Surface degradation occurs in the form of disintegration of aggregates and cement paste into small pieces that pose severe risks of physical injury to maintenance crews or damage to an aircraft engine. Since coarse aggregates typically occupy 60-80% of the concrete volume, aggregates' thermal properties and microstructure should play a crucial role in the degrading mechanism. At high temperatures, concrete with lightweight aggregates is reported to have better performance compared to concrete with normal-weight aggregate. Thus, the present study carried out a detailed investigation of the mechanical and thermal performance of lightweight aggregate concrete exposed to the combined effects of high temperature and hydrocarbon oils simultaneously. To identify the resistance of different concrete with various lightweight coarse aggregates, pumice, perlite, lytag (sintered fly ash), and crushed brick were used as lightweight coarse aggregates in concrete. Also, basalt aggregate concrete was used as a reference. After cyclic exposures, all specimens were tested for residual mechanical, thermal, chemical, and microstructural properties. Overall, concrete with crushed brick aggregate and LYTAG used in this study showed superior resistance to the simulated airfield conditions.

Recent legalization and normalization of euthanasia through the government program of medical assistance in dying (MAiD) is impacting Canada's population dynamics and is now the fifth leading cause of death. Ongoing proposals suggest expanding MAiD eligibility to mental illness. A knowledge gap exists to determine to what degree this expansion of MAiD may exacerbate the existing challenges associated with an aging population and declining birth rates. It may also complicate meeting national population targets of 100 million by 2100 set by the Century Initiative. To fill these knowledge gaps, this study conducts a comprehensive evaluation of the prevalence of mental illness in Canada. The results show that if MAiD is expanded to mental disorders under the high MAiD scenario by mid-century it will impact about 12.3% of the population. The low MAiD scenario projects an increase from 45,786 to 227,024 additional deaths/year. The likely scenario shows MAiD growing from 214,499 to approximately 896,312 by mid-century. Thus, if MAiD is expanded to mental illness under the likely scenario, more than half a million additional immigrants will be needed per year. These results emphasize the importance of integrating immigration policies with MAiD practices to ensure demographic stability and achieve long-term population objectives.

The major industrial cities of Bangladesh are heavily experiencing air pollution-related problems due to the increased trend of Particulate Matter (PM2.5) and other pollutants. This paper aimed to investigate and understand the relationship between PM2.5 and land use and climatic variables and to identify the riskiest area and population groups using a Geographic information system and regression analysis. The results show that about 41% of PM2.5 concentration increased within 19 years (2002-2021) in the study area, while the highest concentration of PM2.5 was found from 2012 to 2021. The concentrations of PM2.5 were higher over barren lands, forests, croplands, and urban areas. About 64%, 62.7%, 57%, and 55% concentrations were increased annually over barren lands, forests, cropland, and urban regions, respectively, from 2002-2021. The highest concentration level of PM2.5 (84 mg m-3) among other land use classes was found in urban areas in 2021. The regression analysis shows that air pressure (r2= - 0.26), evaporation (r2= - 0.01), humidity (r2= - 0.22), rainfall (r2= - 0.20), and water vapor (r2= - 0.03) were negatively correlated with PM2.5. On the other hand, air temperature (r2= 0.24), ground heat (r2= 0.60), and wind speed (r2= 0.34) were positively correlated with PM2.5. More than 60 Upazilas were the most polluted areas, with 1,948,029 populations (ages 0-5), 485,407 (ages 50-69), and a total population of 11,260,162 were in the high-risk/hotspot zone. The government line department may use the main results paper's key results, policymakers, stainable development practitioners, academicians, and others for integrated air pollution mitigation and management in Bangladesh and other geographical settings worldwide.

Two representable substructural logics ${\rm {\bf UL}}_\omega $ and ${\rm {\bf IUL}}_\omega $ are logics for finite UL and IUL-algebras, respectively. In this paper, the standard completeness of ${\rm {\bf UL}}_\omega $ and ${\rm {\bf IUL}}_\omega $ is proved by the method developed by Jenei, Montagna, Esteva, Gispert, Godo and Wang. This shows that ${\rm {\bf UL}}_\omega $ and ${\rm {\bf IUL}}_\omega $ are substructural fuzzy logics.

The EFQM Model, established in 1991, serves as a framework for organizational excellence, helping achieve sustainable success through an integrated management system. The model's evo-lution is driven by the need to adapt to global trends, threats, and technological innovations such as: digital transformation, employee engagement and well-being, remote work, agile performance management, diversity, equity and inclusion (DEI), sustainability, AI, and big data. The new EFQM Model 2025, presented in Istanbul in June 2024, introduces significant changes, emphasiz-ing sustainability, innovation, and technology. These changes are analyzed based on the logic of three questions: Why, How, and What. Why: There is a necessity for better alignment of organizations with contemporary challenges through flexibility, risk resilience, and innovation capabilities in a dynamic business environ-ment, including alignment with the UN Sustainable Development Goals (SDGs). How: The model introduces an integrated approach to performance management and transfor-mation, incorporating advanced technologies such as AI and data analytics. What: Implementing the EFQM Model 2025 enhances organizational adaptability, innovation, and flexibility, improving financial, operational, and strategic outcomes. Better alignment with sustainability goals leads to long-term value and social responsibility. Improved stakeholder engagement methods enhance understanding and satisfaction. The use of advanced technologies supports innovation and operational efficiency, while better strategic and operational performance and risk management ensures greater stability and the ability to anticipate future challenges.

We studied the influence of lava meal, zeolite and top layer of sandy soil as bedding additives on gaseous C and N losses from a sloping-floor barn of naturally ventilated animal housing. We selected four barn units where eight young bulls’ group was reared in each barn. Chopped straw of wheat and barley applied daily at the rate of 5 kg per livestock unit (LU) in bedding areas where one LU consisted of 500 kg body mass of live bulls. Zeolite, lava meal and sandy soil (18% clay + silt) applied in barn at the rate of 10, 20 and 30% of straw dose, respectively. Static flux chamber was used to measure gases emissions from the barn unit and mass balance calculation was used to calculate straw manure total N (TN) losses during housing phase. On an average, all bedding additives decreased 85% of the NH₃ emission compared to control; however, they did not influence CH₄ emission. Zeolite decreased CO₂ (35%) and N₂O (37%) emission rates. Subsequently, lava meal, sandy soil and zeolite decreased 23, 37, and 50% of TN losses from barn manure, respectively. Overall, measured N emissions through NH₃-N and N₂O-N from the barns was 11% of calculated TN losses while remainder 89% was most probably attributed to di-nitrogen (N₂), a harmless gas. Hence, in straw-based cattle housings, zeolite could be a promising additive for reduction of CO₂, N₂O and NH₃ emissions and sandy soil can be considered as cheap and readily available resource for reducing NH₃ emission.

Although solar photovoltaic (PV) system costs have declined, capital cost remains a barrier to widespread adoption. Do-it-yourself (DIY) system designs can decrease costs by about 50% by reducing labor costs, but if not attached to a building structure demand ground penetration for conventional footings. This is not technically and economically feasible at all sites. To overcome these challenges, this study details systems designed to eliminate drilling holes and pouring concrete. Two different designs for both fixed tilt and variable tilt PV racking are investigated to assess their structural integrity, constructability, and economic cost when fabricated with a ballast-supported foundation. The ballast-supported foundations are analyzed for eight such systems by proposing two separate ballast designs: one for single line of post systems, and one for double line of post systems built on a 4-kW basis. The results of the analysis found that both designs are slightly more expensive than typical in-ground concrete systems by 25%, but the overall DIY systems costs remain economically advantageous. Sensitivity analyses are conducted to show how modifications to the dimensions including clearances and distances between gabions influence the weight of the system and thus change the economic value of the design, so users can trade dimensional freedom for cost-savings, and vice versa. Overall, all the wood-based PV racking system designs provide users with cost-effective and easy DIY alternatives to conventional metal racking, and the novel ballast systems presented provide more versatility for PV systems installations.

Canada has committed to reducing greenhouse gas (GHG) emissions by increasing the non-emitting share of electricity generation to 90% by 2030. As solar energy costs have plummeted, agrivoltaics (co-development of solar photovoltaic (PV) systems and agriculture) provide an economic path to these goals. This study quantifies agrivoltaic potential in Canada by province using geographical information system analysis of agricultural areas and numerical simulations. Systems modeled would enable conventional farming of field crops to continue (and potentially increase yield) by using bifacial PV for single-axis tracking and vertical system configurations. Between a quarter (vertical) to more than one third (single axis tracking) of Canada’s electrical energy needs can be provided solely by agrivoltaics using only 1% of current agricultural lands. These results show that agrivoltaics could be a major contributor to sustainable electricity generation and provide the ability for Canada to render the power generation sector net zero/GHG emission free. It is clear that the potential of agrivoltaic-based solar energy production in Canada far outstrips current electric demand and can thus be used to electrify and decarbonize transportation, heating, expand economic opportunities by powering the burgeoning computing sector, and export green electricity to the U.S. to help eliminate their dependence on fossil fuels.

Failaka Island, located in the far east of Kuwait Bay, is about 20 km from the State of Kuwait’s coast, and represents a focal point for regional geography and history, with pristine beaches and archaeological sites dating to the Bronze, Iron, Hellenistic, Christian and Islamic periods. According to environmental data and in coordination with local authorities to develop an urban plan, the island is set to become the first tourist destination for the State of Kuwait. To achieve the Vision of Kuwait 2035, one of the planning objectives focuses around Urban Planning for the Establishment of Environmental Cities that Achieve (UPEECA) environmental sustainability criteria. The paper then, aims to propose the environmental urban plan for Failaka Island. Based around Environmental Analytical Hierarchical Processes (EAHP), and using the Field Calculator and ModelBuilder functions in ArcGIS, this research centres on the feasibility of carrying out an urban plan using suitability modelling that includes four factors and 13 criteria covering the island’s ecological and human composition. This study utilizes both remote sensing (UAVs for 3D imaging) and field study (ground truthing) to identify changes in land use and land cover – such as using sample analysis of the historical sites and soils for tracing evidence and creating/updating a soil map – and create the first GIS database for the island that can lead to generating a suitability model.

Various methods of polymer surface tailoring have been studied to control the changes in wetting behavior. Polymers having precisely controlled wetting behavior in a specific environment are blessed with a wealth of opportunities and potential applications exploitable in biomaterial engineering. The controlled wetting behavior can be obtained by combining surface chemistry and morphology. Plasma assisted polymer surface modification technique have played a significant part to control surface chemistry and morphology. This review focuses on plasma polymerization and investigations regarding surface chemistry, surface wettability, coating kinetics, as well as coating stability. We begin with brief overview of plasma polymerization; these include growth mechanisms of plasma polymerization and influence of plasma parameters. Next, surface wettability and theoretical background structures and chemistry of superhydrophobic and superhydrophilic surfaces. In this review, overview of recent work on tunable wettability by tailoring surface chemistry and physical appearance (i.e. substrate texture) is also described. The formation of smart polymer coatings, which adjust their surface wettability by according to outside environment, including, pH, light, electric field and temperature. Finally, the applications of tunable wettability and pH responsiveness of polymer coatings in real life are addressed. This review should be of interest to plasma surface science communality specifically focused controlled wettability of smart polymer surfaces.

The prohibitive costs of small-scale solar photovoltaic (PV) racks decreases PV adoption velocity. To overcome these costs challenges, an open hardware design method is used to develop two novel variable tilt racking designs. These are the first stilt mounted racking designs that allow manual change of tilt angle from zero to 90 degrees by varying the length of cables. The racks are designed using the calculated dead, wind and snow loads for Canada as conservative design for most of the rest of the world. Structural capacities of the wooden members are then ascertained and resisting bending moment, shear force, tensile force, and compressive force for them is calculated. A structural and truss analysis is performed to ensure that racking design with-stands the applicable forces. Moreover, implications of changing the tilt angle on the wooden members/cables used to build the system are also determined. The systems offer significant economic savings ranging from 1/3rd to 2/3rd the capital expenses of the commercially available alternatives. In addition, the racking designs are easy-to-build and require minimal manufacturing operations, which increases their accessibility. The stilt-mounted designs can be employed for agrivoltaic settings while allowing farm workers shaded ergonomic access to perform planting, weeding, and harvesting.

Optimizing the nitrogen (N) timings and rate can improve nutrient uptake, and nutrient-efficiencies, especially of N in wheat under the changing climate scenario. Climatic stress in the form of high temperature and drought resulted in the decreased crop physiology and, ultimately, grain yield. Taking the example of rainfed wheat, we quantified the impact of N application rates as full and split-dose at three variable sites of rainfed Pothwar, Pakistan by conducting field experiments for two years (2013-14 and 201-15). Treatments include, T₁ = Control (No fertilizer applied), full dose of N applied at the time of crop sowing, i.e. T₂ = 50 kg N ha^-1, T₃ = 100 kg N ha^-1 and T₄ = 150 kg N ha^-1 and split application of N at different timings during different stages of the crop called as split application of N, i.e. T₅: Application of 50 kg N ha^-1 (15 kg N ha^-1 (Sowing) : 20 kg N ha^-1 (Tillering) :15 kg N ha^-1 (Anthesis), T₆: Application of 100 kg N ha^-1 (30 kg N ha^-1 (Sowing): 40 kg N ha^-1 (Tillering) : 30 kg N ha^-1 (Anthesis) and T₇: Application of 150 kg N ha^-1(45 kg N ha^-1 (Sowing) : 60 kg N ha^-1 (Tillering) : 45 kg N ha^-1 (Anthesis). Three study sites include viz. Islamabad (High rainfall with optimum temperature), University Research Farm (URF)-Koont (Medium rainfall with moderate temperature), and Talagang (low rainfall with high temperature). Results showed that the highest stomatal conductance (0.80 mole m^-2 sec^-1), net photosynthetic rate (20.07 μmole m^-2s^-1), transpiration rate (9.58 mmole m^-2s^-1), intercellular CO₂ concentration (329.25 μmole CO₂ mol^-1 air), SPAD values (58.86 %) and proline contents (35.42 μg g^-1) were obtained for split application of N (T₆ = Split N₁₀₀) compared to control and full dose of N treatments. Among sites, these physiological traits remained highest at Islamabad and lowest at Talagang, while among years, maximum values of the measured parameters were obtained in 2013-14. A similar trend was observed for crop total N, N efficiencies, and agronomic traits of the crop. Our results suggest that optimum N application rate and its suitable timings can help to harvest real benefits of N as in our findings, split dose resulted in the maximum performance of the crop from physiological parameters to the agronomic traits of the rainfed wheat crop.

Respiratory syncytial virus (RSV) is a leading cause of acute lower respiratory infections in young children worldwide. RSV-associated deaths in children are underreported in Bangladesh. We analyzed hospital-based surveillance data on severe acute respiratory infections (SARI) in under-five children before (August 2009–February 2020) and during the COVID-19 pandemic (March 2020–March 2022). Using the World Health Organization definition, we identified SARI cases in 14 tertiary-level hospitals. Nasopharyngeal and oropharyngeal swabs were collected for real-time reverse transcriptase-polymerase chain reaction (rRT-PCR) testing of six respiratory viruses, including RSV. SARI deaths during the pandemic (2.6%, 66) were higher than pre-pandemic (1.8%, 159; p<0.001). Nearly half of pandemic deaths (47%) had underlying respiratory viruses, similar to the pre-pandemic rate (45%). RSV detection in deaths was consistent pre-pandemic (13%, 20/159) and during the pandemic (12%, 8/66). Children aged <6 months constituted 57% (16) of RSV-related deaths. Evaluating interventions like maternal vaccination and infant monoclonal antibody prophylaxis is crucial to address RSV, a major contributor to under-five SARI deaths.

The article focusses on detecting the unbalance of a mechanical component in the electric drive system of a two-mass servomechanism with a PMSM motor, which is connected to the load via a long, flexible shaft. In the example analysed, the degree of unbalance was determined using the reference current signal from the speed controller of the FOC control system. The authors pre-sented a two-mass model with an unbalanced mechanical system. The STFT transform was used to analyse the symptoms of unbalance and an artificial neural network MLP was used for system state inference. The effectiveness of the presented analysis, based on the reference current signal from the sensor embedded in the control system, was experimentally confirmed.

Newcastle disease (ND) is a viral infection that affects domestic and wild type birds especially poultry and establishing serious economic costs for poultry industry. Newcastle disease virus’ (NDV) HN membrane receptor is attractive therapeutic candidate, contributes to pathogenicity with various functions such as fusion and prevent viral self-agglutination to permit viral spread. No validated HN inhibitor has been reported yet. However, the purpose of current study was to determine potential compounds via pharmacophore-based screening of natural molecules to inhibit HN receptor of NDV. Physicochemical characteristics and phylogenetic analysis were determined to elucidate structural information and phylogeny of target protein across different species as well as members of gene family. Fill missing residues of HN target protein and evaluated via PROCHECK and VERIFY 3D. We employed shape and feature-based pharmacophore model and screen natural compound’s library through numerous scoring schemes. Top 48 hits with 0.8860 pharmacophore fit score were subjected towards structure-based molecular docking. Top 9 compounds was observed witihin the range of -8.9 to -7.5 kcal/mol binding score. Five best-fitting compounds in complex with HN receptor were subjected to predict biological activity and ADMET analysis. Top two hits were selected for MD simulations to validate binding modes and structural stability. Upon scrutinization, A1 (ZINC05223166) emerges as potential HN inhibitor to treat ND, necessitating further validation via clinical trials.

Advances in early detection of Breast cancer and treatment improvements have significant-ly increased survival rates. Traditional screening methods, including mammography, MRI, ultrasound, and biopsies, while effective, often come with high costs and risks. Recently, thermal imaging has gained attention due to its minimal risks compared to mammography, although it is not widely adopted as a primary detection tool since it depends on identifying skin temperature changes and lesions. The advent of machine learning (ML) and deep learning (DL) has enhanced the effectiveness of breast cancer detection and diagnosis using this technology. In this study a novel methodology for developing an interpretable computer-aided diagnosis (CAD) system for breast cancer detection, leveraging explaina-ble Artificial Intelligence (XAI) throughout its various phases. To achieve these goals, we proposed a new multi-objective optimization approach named Hybrid Particle Swarm Optimization algorithm (HPSO) and Hybrid spider Monkey Optimization algorithm (HSMO). These algorithms simultaneously combine the continuous and binary representations of PSO and SMO to effectively manage trade-offs between Accuracy, feature selection and hyperparameter tuning. We evaluate several CAD models and investigate the impact of handcrafted methods such as Local Binary Patterns (LBP), Histogram of Oriented Gradients (HOG), Gabor filters, and edge detection. We further shedding light on the effect of feature selection and optimization on feature attribution and model decision-making processes using the SHapley Additive exPlanations (SHAP) framework, with a particular emphasis on cancer classification using the DMR-IR dataset. The results of our experiments demonstrate in all trials that the performance of the model is improved. Also with HSMO our models achieved a high accuracy of 98.27% and F1- score of 98.15% while selecting only 25.78% of the HOG features. This approach not only boosts the performance of CAD models but also ensures comprehensive interpretability. This method emerges as a promising and transparent tool for early breast cancer diagnosis.

A growing number of clinical data suggests that the use of antiplatelets and/or statins pre-stroke are associated with reduced severity and better functional outcomes for ischemic stroke. Studies have shown that the long-term use of ACEI/ARB pre-stroke is beneficial in reducing severity at onset and improving functional outcomes. We aimed to compare stroke severity and early functional outcome between patients taking ACEI/ARB and those who were not, and to identify any additional effects to taking ACEI/ARB with antiplatelets, statins, or both. In this retrospective case-control study, we assessed 218 patients who presented with ischemic stroke to the stroke unit in Padeh-Poriyah Hospital between 2019-2020. Of these patients, 119 took ACEI/ARB pre-stroke. A significantly higher percentage of ACEI/ARB-treated patients had a history of hypertension (HTN) and hyperlipidemia and were taking antiplatelets and/or statins, compared to the non-ACEI/ARB group. We observed that pre-stroke treatment with ACEI/ARB is associated with worsened stroke severity and reduced early functional outcomes. No significant benefit to taking ACEI/ARB with antiplatelets and/or statins pre-stroke was observed. Due to the nature of our study, the data should be interpreted as suggestive. Thus, prospective studies of these medications on ischemic stroke severity and early outcomes are warranted.

This study introduces an integrated method for managing process risks in a Business Process Reengineering (BPR) project, using Robust Data Envelopment Analysis (RDEA) and machine learning (ML). The goal is to prioritize risks based on three standard factors of PFMEA: Severity, Occurrence, and Detection (S-O-D), and incorporating two additional factors (Breakdown Cost and Breakdown Duration) seen as undesirable outputs. The model also accounts for the effect of uncertainty on expert-estimated values by applying disturbance percentages in the linear PFMEA-RDEA model. A machine learning model is proposed to predict new values if partial or total modifications have been made to the processes. The approach was implemented in an au-tomotive sector company, and the results showed the impact of uncertainty on values by com-paring different approaches such as RPN, PFMEA-DEA, and PFMEA-RDEA. A new reduced risk categorization was achieved, who allowed for decision-makers to focus on necessary actions for reengineering.

Poliomyelitis, commonly known as “polio” is a paralytic and perilous disease caused by the poliovirus. Due to its highly contagious nature, the virus was a challenge to the world in the late 1980s. . Since 1988 the collective work of the Global Polio Eradication Initiative (GPEI), Centre for Disease Control and Prevention (CDC), and World Health Organization (WHO) through immunizations, communication awareness, and monitoring have helped the world exonerate polio. The mission of polio-free Pakistan was herculean and had confronted enormous challenges in different ways but came out with positive results. In 2019, with only two remaining polio-endemic countries, Pakistan and Afghanistan, GPEI launched an “Endgame strategy 2019-2023” which aims to eradicate polio globally, with a targeted focus, especially on polio-endemic countries, the plan emphasizes the early detection of polio cases for complete eradication and to restrict the spread of polio. Pakistan has achieved a milestone in combating polio despite having a web of factors that have thwarted Pakistan’s polio eradication efforts, but this is not the end, the struggle continues until we really get an internationally verified certification of Polio free nation, for this WHO has designed a multidisciplinary strategy 2022-2026 to really end this polio for once and for all.

The present study deals with the transplantation of mature Argan trees (Argania spinosa L. Skeels) and focuses on optimizing survival rates depending on the seasons, the type of shoot pruning applied to the trees and preconditioning treatments consisting of root pruningand watering for a few months before transplanting. So far, the transplantation of this species at the adult stage has not received enough attention in spite of its ecological and socio-economic importance for the regions where it thrives. The results obtained show that transplanting in summer, autumn and winter resulted in survival rates exceeding 50%. The Argan trees transplanted in spring hardly achieved 10% survival. However, the total cutback of the crown induced survival improvement that reached a rate greater than 70% for summer, autumn and winter, and 50% for spring. Watering alone or combined with root pruning for 6 months helped improve the recovery rate but only when carried out in autumn with transplantation in spring. On the other hand, when these pre-treatments were applied in the spring to transplant the trees in summer, the recovery rate was not improved.

Nowadays, more than 180 million people believe that the Holy Qur'an was sent by the Almighty Allah through Prophet Muhammad in 610-632 A.D in Mecca and Medina. However, the word Mecca (Q: 48:24) is mentioned only once in the entire Holy Qur'an, which is not related to the birth of the Prophet or any worship. Conventional Islam is mostly based on the hearsay of some Islamic narrators published in the eighth and ninth centuries. To think deeply and conduct research on the verses of the Holy Quran has been mentioned (special urge) directly and indirectly by this Holy Scripture itself many times but it would not be wrong to say that there is no scholarship on the verses of the Quran based on the research method described in the Holy Quran until the present century. Therefore, this paper has been dared to carry out by combining the methods of research followed in the Holy Quran and the academically accepted research methodology. The analysis shows that the results of almost fourteen hundred years of mythological history of conventional Islamic narrators are opposites. First of all, the proper name of the Prophet revealed by the Holy Quran is Ahmed, but Muhammad is an adjective and there are many such names. Secondly, this prophet was not born in Mecca, KSA, nor in 570/571 A.D, but in the Beqaa Valley of Lebanon, between the third and fourth centuries. Thirdly, the Muslim Hajj (pilgrimage) of Mecca is celebrated entirely according to the Lahwal Hadith (idle tales) (Q: 31:6) in the language of the Holy Quran. Originally the place designated for pilgrimage was in the Beqaa Valley, Lebanon. This article will have a double influence on the Muslim world, that is, Islamic scholars will think again deeply and research new ways of scholarship of the Holy Quran, instead of based on the hearsay of idle tales (Lahwal Hadith). On the contrary, those who are stubborn Islamic narrators, since they have already rejected the Holy Quran, will not hesitate to violently attack the researchers and they will not be positively motivated by this paper. This article specifically urges Islamic scholars to conduct in-depth studies on the most important issues of Islam using the Holy Quranic research method.

This research paper describes the social engineering concepts, techniques, and security countermeasures. This research aims to study various social engineering techniques to find the best countermeasures that would help to reduce social engineering attacks.

One of the models that could be used to understand the adoption of vaccine uptake is the Health Belief Model (HBM). The aim of this study is to assess the role of HBM constructs and perceived health status (PHS) on vaccination status of individuals and to understand the role of socio-demographic variables on HBM scoring. A comparative cross-sectional telephone survey was conducted among 1,325 vaccinated (60.0%) and non-vaccinated (40.0%) vaccinated individuals aged 40 years and above in July 2021 in Punjab province, Pakistan. A higher level of education was the strongest predictor of positive HBM. All constructs of HBM, PHS and cues-to-action were significant predictors of COVID-19 vaccination uptake with perceived benefits as the strongest predictor. In order to expand the vaccination coverage, doubled pronged interventions utilizing both ICT and human resources should be designed that address each barrier perceived by individuals and understandably communicate the benefits of COVID-19 vaccine to the broader population.

Over the years, leaked fluids from the aircraft caused severe deterioration of the airfield pavement. The combined effect of hot exhaust from the auxiliary power unit of military aircraft and spilt aviation oils caused rapid pavement spalling. If the disintegrated concreted pieces caused by spalling is sucked into the jet engine, it may cause catastrophic damage to the aircraft engine or physical injury to maintenance crews. This study investigates the effectiveness of incorporating hybrid fibres into ordinary concrete to improve the residual mechanical and thermal properties to prevent spalling damage of pavement. Three fibre reinforced concrete samples made with micro steel fibre and polyvinyl alcohol fibre with a fibre content of zero, 0.3%, 0.5% and 0.7% by volume fraction. These samples were exposed to recurring high temperature and aviation oils. Tests were conducted to measure the effects of repeated exposure on the concrete's mechanical, thermal and chemical characteristics. The results showed that polyvinyl alcohol fibre reinforced concrete suffered a significant loss of thermal properties and residual mechanical strength than the micro steel fibre reinforced concrete. However, hybrid fibre reinforced concrete performed better in retaining higher residual properties, and no spalling of concrete was observed.

This paper investigates an innovative photovoltaic cell configuration, denoted as “Au/CuSCN/RbGeI3/CdTe/ZnO/TiO2/FTO", using SCAPS-1D simulation. The research focuses on optimizing device performance by analyzing key components, including ZnO as the electron transport layer (ETL), RbGeI3 as the perovskite absorber layer, CuSCN as the hole transport layer (HTL), and CdTe as the active buffer layer. A comparison is made with the standard “Au/CuSCN/CH3NH3SnI3/CdTe/ZnO/TiO2/FTO" configuration under dark and illuminated conditions. Through an in-depth investigation involving temperature effects, generation rate analysis, RbGeI3 absorber layer thickness, Nd level, and interface defect levels, an optimized design for a unit area is achieved. The proposed solar cell demonstrates outstanding performance metrics, including an open circuit voltage (Voc) of 0.94V, a short circuit current density (Jsc) of 34.52mA/cm2, a fill factor (FF) of 77.77%, and an energy conversion efficiency (η) of 25.40%. These values significantly outperform the reference models with energy conversion efficiencies of 10.11% and 21.09%. Real-world applicability is validated by implementing these optimized characteristics in a photovoltaic system for Pakistan’s geographical location using PVSyst software. The suggested solar cell achieves a remarkable performance ratio (PR) of 85.6%, surpassing the PR of the reference basic solar cell model at 83%. The findings of this research offer a promising and superior solar cell design, incorporating innovative materials and optimization techniques to achieve exceptional energy conversion efficiency and overall performance. This study’s outcomes have the potential to advance photovoltaic technology and contribute to sustainable energy solutions worldwide.

Coronavirus that is also known as COVID-19 disease is produced by SARSCoV-2. This causative agent is highly contagious and can cause potentially fatal pneumonia worldwide with serious public health concerns. In the beginning among infected individuals, most of them were those who were mainly shown to the wet animal market in a big city of China known as Wuhan. So, it was suggested that this was almost certainly the zoonotic source of COVID-19illness. The transitional source of origin and their mode of transmission to humans were not known obviously. Conversely, from human to human rapidly transformation have been confirmed generally. Currently, there is no availability of FDA approved clinically antiviral drugs and/or vaccines to be used against the COVID-19. Afterward, SARS-CoV and MERS-CoV, the occurrence of SARS-CoV-2 has been manifested as the third sketch of an enormously pathogenic coronavirus into human population globally. In this review, we provide a brief overview of the history of COVID-19 in Pakistan up-to 18^th weeks after beginning, current situation, epidemiology, and its impact on the human population. Moreover, we focused on physiological variation during the incubation period, genome analysis of SARS-CoV2, supportive treatment approaches, and safety measures in the Pakistani population, which may be supportive for combating the risk of COVID-19 epidemic. We also reviewed the future approaches for the development of therapeutic interventions and vaccines to cope with the COVID-19 epidemic.

Four new zoonotic coronaviruses outbreak occurred in the past two decades. The first coronavirus outbreak happened in 2003 and was named Severe Acute Respiratory Syndrome Coronavirus-1 (SARS-CoV-1), followed by Middle East Respiratory Syndrome Coronavirus (MERS-CoV) in 2013, and by Swine Acute Diarrhoea Syndrome (SADS) in 2017. In late December 2019, a patient from Wuhan Seafood Wholesale Market, China, was admitted to Huang's hospital with respiratory distress syndrome (RDS) of apparently unknown etiology, which later was diagnosed with SARS-CoV-2-induced coronavirus disease-19 (COVID-19). SARS-CoV-2 was identified from another clade within the subgenus Sarbecovirus of the genus Betacoronavirus. This new CoV variant showed 96.2% similarity at whole-genome level to bat coronavirus. Based on genetic studies, pangolin, bats, and snakes are suspected to be a possible intermediate host of this virus, but further research is in progress to determine how this virus appeared and what is the exact source of infection. The SARS-CoV-2 outbreak has higher transmissibility, contagiosity and pathogenicity compared to that of SARS-CoV-1 and MERS-CoV. SARS-CoV-2 swiftly spread from continent to continent and is persistently causing a shocking global public health concern albeit the rate of infected cases and mortality is relatively decreasing over time. In this review, we provide an update on the origin, transmissibility, etiology, epidemiology, and evolution of COVID-19. We also highlight the current diagnostics, therapies, and prognostics for SARS-CoV-2. Eventually, we report and provide our humble opinion about the preventive strategies to control the ongoing related pandemic situation at global and individual levels, considering the international public health emergency and possible future epidemics and pandemics.

Occupational incidents in construction workplaces present a persistent challenge, with severe consequences for both workers and project outcomes. This study aims to examine the specific causal factors contributing to these incidents, focusing on the interaction between worker-related, environmental, and procedural factors. The objective is to identify key contributors to workplace accidents and develop a unified predictive model to mitigate future risks. To achieve this, we employed a machine learning approach on a comprehensive accidentology dataset collected from contractors across multiple construction sites. The dataset includes variables such as worker ex-perience, environmental conditions, adherence to safety protocols, and more. By analyzing direct, indirect, and root causes, the methodology uncovers hidden patterns and interdependencies that traditional analysis might overlook. The study’s findings indicate that worker experience and environmental factors are the most significant contributors to incident occurrence, with a clear interaction effect between these variables. The results not only confirm previous research but also offer enhanced predictive capabilities for future safety measures. This research demonstrates the value of machine learning in generating data-driven insights, ultimately aiding in the develop-ment of targeted interventions to improve safety standards in the construction industry.

Nutrients management is a mainspring in agricultural systems for sustained productivity, economy sustainability and environmental quality. Excessive and lesser nutrient application caused environmental pollution and reduced production, respectively impacting socio-economics of the entire ecosystems. Sustainable agricultural production thus demands supplementation of nutrients either through natural processes, application of animal by-products, and mineral fertilizers to crop fields. Technology application for treating useless agricultural wastes into useful source is a management strategy that prevents environment pollution. Crude animal manures triggered soil degradation, attenuation air and water quality, and resulted in higher concentrations of heavy metals. Primary nutrients, i.e., nitrogen, phosphorus and potassium are used globally and are non-renewable. Augmented upsurge in prices of inorganic fertilizers and required discharge restrictions on nutrient has stimulated the technological developments including biochar, composting, vermicomposting, composting with biochar, pyrolysis, forward osmosis, and electro-dialysis to recover nutrients. Therefore, outlining the research gaps considering the present and imminent potential of these technologies for adaptation of nutrient recycling is of great importance. Thus, it’s need of an hour to fix our environment and for that scientists are trying to introduce and renovate the technologies which have immense potential to mitigate the negative effects of technology adversities on our environment.

Introduction: Hypertension is a serious public health problem in Morocco. The objective of this pilot study was to estimate the salt intake of Moroccan adults by measuring 24-hour urinary sodium excretion. Methods: 132 participants were recruited from the central region of Morocco. Sodium, potassium and creatinine levels were measured using the 24-hour urine samples. Additional data included anthropometric measurements and socio-demographic questionnaire. Results: The daily sodium, potassium and creatinine excretions were 2779.1±1334.9 mg, 1350.0±642.8 mg and 820.3 ± 381.2 mg, respectively. Data analysis revealed that 71.2% of the participants had a daily sodium intake more than 2000 mg (5g of salt) recommended by the WHO. The mean of potassium excretion was 1350.0±642.8 mg /day, this average was lower than 3.51g per day recommended by the WHO. Conclusion: Public health measures to reduce sodium and increase potassium consumption in order to decrease the population’s risk of high blood pressure and heart disease are recommended.

Melioidosis, or Whitmore's disease, is an infectious disease initiated by a bacteria known as Burkholderia pseudomallei. This bacteria is commonly found in contaminated soil and water. In Malaysia, the mortality from melioidosis infection was reported to be higher than in other infectious diseases. The research on melioidosis is still limited in Malaysia but slightly increasing. The article's objective was to seek all the melioidosis research related to mortality in Malaysia. The information from the selected papers was then abstracted into two sections; Section 1: Review of literature and Section 2: Findings on mortality from melioidosis in Malaysia. In Section 1, the information on transmission and clinical features of melioidosis, demographic, severity of melioidosis, a clinical signs of melioidosis, diagnosis of melioidosis, management of melioidosis, the economic burden of melioidosis, and incidence of mortality from melioidosis were discussed in this paper. Meanwhile, in Section 2, the findings on mortality of melioidosis in Malaysia were discussed according to eight published articles. It is important to manage patients with melioidosis with appropriate treatment and management to reduce severe complications, high fatality rate, and relapse. More published research on melioidosis will provide input to the clinicians on a more detailed understanding of how to improve the diagnosis of melioidosis and the prognosis factors of this disease.

In this short communication, a concept has been presented to model geographical data to predict future temperature of Tabuk, region. Machine learning has been applied to the weather station data to develop a prediction model. The preliminary results are promising and encouraging and are envisaging to further this research towards the determination of unknown temperature rise in the region. This is important to mention here, that the problem has been formulated as a Regression problem, NOT as a classification problem. Hence, applying Convolutional neural networks is not possible, due to the non-existence of classes or converting the temperature values to classes does not make any sense. Hence, this is defined as a regression problem which achieved encouraging desirable results.

In the article, the results of research on a NiTi alloy with a high nickel content (51.7 at.%), produced using the additive technology SLM method and subjected to isothermal aging after so-lution annealing, are presented. The study involved the determination of the sequence of phase transformations occurring using differential scanning calorimetry (DSC), and the determination of the temperature range of these transformations. In parallel, the phase composition was determined using the XRD method; hardness and the Young’s modulus were also determined. The analysis of the DSC results obtained indicates the following characteristic features of the NiTi alloy, which change with ageing time: (1) during cooling (from +1500C to -500C), the type of transformation changes from a one-step transformation after solution annealing to a two-step transformation after the ageing process over 1, 20 and 100 hours at 500°C; (2) during heating (from -500C to +1500C) for all the samples, regardless of the ageing time, only a one-step transformation from martensite M(B19’) to austenite A(B2) is observed; (3) the temperature at which the transformation starts increases with the ageing time, (4) the width of the total temperature range of the transformation M(B19’)  A(B2) during heating changes from large (∆T=49,7°C), after solution annealing, to narrow (∆T=19.3°C and ∆T=17.9°C after 20 h and 100 h of ageing) and, most importantly, (5) a comparison with literature data shows that, irrespective of the composition of the NiTi alloy and the manufacturing technology of the alloy samples (regardless of the fact whether this was traditional or additive technology), a sufficiently long ageing process period leads to the occurrence of the martensite  austenite transformation in the same temperature range.

Sugarcane mosaic virus (SCMV) is a (genus, Potyvirus; family, Potyviridae) is a widespread, deleterious, and the most damaging pathogen of sugarcane ((Saccharum officinarum L. and Saccharum spp.) which causes a substantial barrier to producing high sugarcane earning. Sugarcane mosaic disease (SCMD) is caused by, single or compound infection of SCMV, disseminated by the several aphid vectors in a non-persistent manner. SCMV has flexuous filamentous particle of 700-750 nm long, which encapsidated a positive-sense, single-stranded RNA molecule of 9575 nucleotides. RNA interference (RNAi)-mediated antiviral innate immunity is an evolutionary conserved, key biological process in eukaryotes and has evolved as an antiviral defence system to interfere with viral genomes for controlling infections in plants. The current study aims to analyze sugarcane (Saccharum officinarum L. and Saccharum spp.) locus-derived microRNAs (sof-miRNAs/ssp-miRNAs) with predicted potential for targeting the SCMV +ssRNA-encoded mRNAs, using a predictive approach that involves five algorithms. The ultimate goal of this research is to mobilize the in silico- predicted endogenous sof-miRNAs/ssp-miRNAs to experimentally trigger the catalytic RNAi pathway and generate sugarcane cultivars to evaluate the potential antiviral resistance surveillance ability and capacity for SCMV. Experimentally validated mature sugarcane (S. officinarum, 2n = 8X = 80) and (S. spp., 2n = 100-120) sof-miRNA/ssp-miRNA sequences (n = 28) were downloaded from the miRBase database and aligned with the SCMV genome (KY548506). Among the 28 targeting mature locus-derived sof-miRNAs/ssp-miRNAs evaluated, one sugarcane miRNA homolog, sof-miR159c, was identified to have a predicted miRNA binding site, at nucleotide position 3847 of the SCMV genome targeting CI ORF. To verify the accuracy of the target prediction accuracy and to determine, whether the sugarcane sof-miRNA/ssp-miRNA could bind the predicted SCMV mRNA target(s), we constructed an integrated Circos plot. A genome-wide in-silico-predicted miRNA-mediated target gene regulatory network has implicated to validate interactions necessary to warrant in vivo analysis. The current work provides valuable computational evidence for the generation of SCMV-resistant sugarcane cultivars.

A significant attention has been made to the accurate detection of diabetes which is a big challenge for the research community to develop a diagnosis system to detect diabetes in a successful way in the IoT e-healthcare environment. Internet of Things (IOT) has emerging role in healthcare services which delivers a system to analyze the medical data for diagnosis of diseases applied data mining methods. The existing diagnosis systems have some drawbacks, such as high computation time, and low prediction accuracy. To handle these issues, we have proposed a IOT based diagnosis system using machine learning methods, such as preprocessing of data, feature selection, and classification for the detection of diabetes disease in e- healthcare environment. Model validation and performance evaluation metrics have been used to check the validity of the proposed system. We have proposed a filter method based on the Decision Tree (Iterative Dichotomiser 3) algorithm for highly important feature selection. Two ensemble learning Decision Tree algorithms, such as Ada Boost and Random Forest are also used for feature selection and compared the classifier performance with wrapper based feature selection algorithms also. Machine learning classifier Decision Tree has been used for the classification of healthy and diabetic subjects. The experimental results show that the Decision Tree algorithm based on selected features improves the classification performance of the predictive model and achieved optimal accuracy. Additionally, the proposed system performance is high as compared to the previous state-of-the-art methods. High performance of the proposed method is due to the different combinations of selected features set and GL, DPF, and BMI are more significantly important features in the dataset for prediction of diabetes disease. Furthermore, the experimental results statistical analysis demonstrated that the proposed method would be effectively detected diabetes disease and can easily be deployed in IOT wireless sensor technologies based e-healthcare environment.

Introduction: Hospitalization in a COVID-19 unit represents a significant source of stress and psychological distress for patients. Our study aims to determine the factors of psychological distress in the therapeutic and psychosocial management of patients hospitalized with a COVID-19 infection. Methods: This cross-sectional study was carried out over 8 months at the COVID-19 zone of the CHU HASSAN II of FES. 99 patients were evaluated within days of diagnosis by psychometric scales of anxiety, depression, and post-traumatic stress. In the course of this follow-up, we found the presence of psychological impacts in these patients, and we tried to find correlating factors between the occurrence of psychiatric disorders and the set of factors related to sociodemographic data, hospitalization course and treatments taken, as well as family support. Results: 35% of patients had scores in favor of post-traumatic stress disorder, 37% of the patients had definite depression and 50% had anxiety. Post-traumatic stress, depression, and anxiety were correlated with sociodemographic factors, hospitalization, treatments received, and length of stay. Conclusion: The prevalence of anxiety-depressive disorders and post-traumatic stress disorder was high in patients with COVID-19, hence the interest in providing psychological and psychosocial care in the emergency department.

The videofluorographic study is indicated for diseases potentially causing dysphagia and aspiration, such as gastrointestinal reflux disease, cancers of the oropharynx and esophagus, and certain neurologic diseases needing swallowing assessment. The study is designed to survey the anatomy and physiology of swallowing to diagnose any swallowing impairment and is standardized using scales such as the Modified Barium Swallow Impairment Profile (MBSImP). The procedure requires the patient to swallow a barium contrasted bolus which helps to visualize and obtain a real-time result. There are certain complications of the procedure including radiation exposure which requires necessary safety protocols to be followed.

The ever-evolving landscape of technology continually drives the demand for more robust and secure systems. Intrusion Detection and Prevention Systems (IPS) play a pivotal role in safeguarding digital infrastructures. IPS harnesses a blend of cutting-edge technologies, specifically Network-Based, Wireless-Based, and Host-Based Intrusion Detection Systems (IDS), to fortify network security. This multifaceted approach enhances the system's capacity to scrutinize incoming data and network traffic, effectively reducing the risk of intrusion. In the realm of malicious activity detection, IPS employs a diverse array of techniques and mechanisms. Our proposed IPS integrates both anomaly-based and signature-based analysis approaches. In signature-based analysis, intrusions are identified by matching data collected from various activities with pre-defined signatures, employing rule-based methods to detect anomalies effectively. In the anomaly-based analysis approach, the system juxtaposes current activities with a baseline of normal behaviour to flag any deviations. This is achieved through distance-based methods, ensuring a well-rounded approach to threat detection. Our comprehensive prevention system encompasses a suite of security measures, including anti-virus software, Deep Packet Inspection, and Quarantine. These components work in synergy to detect and thwart malicious activities effectively. Even when concealed or hidden, the IPS remains a reliable sentinel, ensuring the integrity of your digital ecosystem. This review delves into the intricate web of terminologies and concepts surrounding Intrusion Detection and Prevention Systems, shedding light on the evolving technology landscape and the critical role IPS plays in bolstering cybersecurity.

Despite Low Power Wide Area Networks’ ability to offer an extended range, it might still encounter challenges with coverage blind spots in the network. This article proposes an innovative energy-efficient nature-inspired relay selection algorithm for LoRa-based LPWAN networks, serving as a solution for challenges related to poor signal range in areas with limited coverage. A behavior swarm-inspired approach has been utilized to select the relays’ localization in the network, providing network energy efficiency and radio signal extension. These relays help bridge communication gaps, significantly reducing the impact of coverage blind spots by forwarding signals from devices with poor direct connectivity with the gateway. The proposed algorithm considers critical factors for the LoRa standard, such as the Spreading Factor or device energy budget analysis. The simulation experiments validate the proposed scheme’s effectiveness in terms of energy efficiency under diverse multi-gateway topology scenarios involving thousands of devices. Specifically, it has been verified that the proposed approach outperforms the reference method in preventing the battery depletion of relays, which is vital for battery-powered IoT devices. Furthermore, for some large-scale problems, the proposed heuristic method achieves over twice the speed of the exact method with a negligible accuracy loss of less than 2%.

Accidents and mishaps in industrial environments like construction, mining, and transport are rampant - mainly due to human negligence and improper monitoring of the workplace. In this paper, we address the safety of workers operating in dangerous environments by improving their situational awareness. According to Occupational health and safety rules, everyone must wear hard hats while on site. Our main idea is to make the hard hats smart by incorporating miniature-sized Doppler radars sensing the users’ surroundings. These Doppler radars are lightweight, rugged, and consume low-power compared to vision-based solutions. This paper discusses the observability of range from Doppler frequency measurements and the magnitude of estimation errors introduced by the human head, walking, and working motions. We present the framework to estimate the position of walls and targets surrounding the worker. For testing, we simulated an indoor environment with randomly moving workers. Experiments showed that once observability conditions are met, human head and walking movements can be handled through added noise in the system. We also present an innovative idea of using two Doppler radars to obtain the estimators’ initial estimates, reducing the estimation error to less than 5cm and convergence time by more than 80

In a generalized topological space Tg = (Ω, Tg), ordinary interior and ordinary closure operators intg, clg : P (Ω) −→ P (Ω), respectively, are defined in terms of ordinary sets. In order to let these operators be as general and unified a manner as possible, and so to prove as many generalized forms of some of the most important theorems in generalized topological spaces as possible, thereby attaining desirable and interesting results, the present au- thors have defined the notions of generalized interior and generalized closure operators g-Intg, g-Clg : P (Ω) −→ P (Ω), respectively, in terms of a new class of generalized sets which they studied earlier and studied their essen- tial properties and commutativity. The outstanding result to which the study has led to is: g-Intg : P (Ω) −→ P (Ω) is finer (or, larger, stronger) than intg : P (Ω) −→ P (Ω) and g-Clg : P (Ω) −→ P (Ω) is coarser (or, smal ler, weaker) than clg : P (Ω) −→ P (Ω). The elements supporting this fact are reported therein as a source of inspiration for more generalized operations.

In a generalized topological space T_g = (Ω, T_g) (T_g-space), the g-topology T_g : P (Ω) −→ P (Ω) can be characterized in the generalized sense by specifying the generalized open, generalized closed sets (g-T_g-open, g-T_g-closed sets), generalized interior, generalized closure operators g-Intg, g-Cl_g : P (Ω) −→ P (Ω) (g-T_g-interior, g-T_g-closure operators), or generalized derived, generalized coderived operators g-Der_g, g-Cod_g : P (Ω) −→ P (Ω) (g-T_g-derived, g-T_g-coderived operators), respectively. For very many T_g-spaces, the δ^th-iterates g-Der_g^(δ), g-Cod_g^(δ) : P (Ω) −→ P (Ω) of g-Der_g, g-Cod_g : P (Ω) −→ P (Ω), respectively, defined by transfinite recursion on the class of successor ordinals are also themselves g-T_g-derived, g-T_g-coderived operators for new g-topologies in the generalized sense on Ω. Thus, the use of novel definitions of g-T_g-derived, g-T_g-coderived operators g-Der_g, g-Cod_g : P (Ω) −→ P (Ω), respectively, based on a very clever construction, together with their δ^th-iterates g-T_g-operators g-Der_g^(δ), g-Cod_g^(δ) : P (Ω) −→ P (Ω), defined by transfinite recursion on the class of successor ordinals, will give rise to novel generalized g-topologies on Ω. The present authors have been actively engaged in the study of g-T_g-operators in T_g-spaces. The study of the essential properties and the commutativity of novel definitions of g-T_g-interior and g-T_g-closure operators g-Int_g, g-Cl_g : P (Ω) −→ P (Ω), respectively, in T_g has formed the first part, and the study of the essential properties and sets of consistent, independent axioms of novel definitions of g-T_g-exterior and g-T_g-frontier operators g-Ext_g, g-Fr_g : P (Ω) −→ P (Ω), respectively, has formed the second part. In this work, which forms the last part on the theory of g-T_g-operators in T_g-spaces, the present authors propose to present novel definitions and the study of the essential properties of g-T_g-derived and g-T_g-coderived operators g-Der_g, g-Cod_g : P (Ω) −→ P (Ω), respectively, and their δ^th-iterates, and the notions of g-T_g-open and g-T_g-closed sets of ranks δ in T_g-spaces.

In a generalized topological space Tg = (Ω, Tg), generalized interior and generalized closure operators g-Intg, g-Clg : P (Ω) −→ P (Ω), respectively, are merely two of a number of generalized primitive operators which may be employed to topologize the underlying set Ω in the generalized sense. Generalized exterior and generalized frontier operators g-Extg, g-Frg : P (Ω) −→ P (Ω), respectively, are other generalized primitive operators by means of which characterizations of generalized operations under g-Intg, g-Clg : P (Ω) −→ P (Ω) can be given without even realizing generalized interior and generalized closure operations first in order to topologize Ω in the generalized sense. In a recent work, the present authors have defined novel types of generalized interior and generalized closure operators g-Intg, g-Clg : P (Ω) −→ P (Ω), respectively, in Tg and studied their essential properties and commutativity. In this work, they propose to present novel definitions of generalized exterior and generalized frontier operators g-Extg, g-Frg : P (Ω) −→ P (Ω), respectively, a set of consistent, independent axioms after studying their essential properties, and established further characterizations of generalized operations under g-Intg, g-Clg : P (Ω) −→ P (Ω) in Tg.

This study aims at providing a climatological analysis of annual and long-term variability of dry periods in the Polish Carpathians in the period of 35 years between 1986 and 2020. Aside days with precipitation, dry periods, namely sequences of days with no precipitation, constitute an inherent characteristic of the climate. The input data for the research was formed by daily precipitation totals from 17 meteorological stations acquired from the Institute of Meteorology and Water Management - National Research Institute, and T. Niedźwiedź catalogue of circulation types over southern Poland. Frequency of dry periods of different duration has been presented. The incidence of long-term periods has been related to the atmospheric circulation. An analysis was performed regarding the change of the average quantity and average length of dry sequences in the 35-year period covered. At most stations, there were no statistically significant trends with respect to the analysed dry day characteristics. This is an obvious result of high variability year-to-year, which means that exclusively large changes may achieve statistical significance. Dry days have been evidenced to related to circulation types. A vast majority of dry days is related to anti-cyclonal systems, particularly the anti-cyclonal wedge (Ka) and western anti-cyclonal (Wa) situations.

Background/Objectives: The aim of the project is a longitudinal assessment of body image and mental health in scoliosis females pre-, postoperatively and in a follow-up, and implementation (one group-CBT scoliosis sample, CBTSS) or not (second group-control scoliosis sample, CSS) of CBT interventions. A healthy female sample (HFS) was also selected for comparative purposes. Methods. 36 in total AIS patients participated in the 1st and 2nd study phases, whereas 23 were eligible in the follow-up. Regarding HFS, 18 participants were included in the study. The CBT intervention took place pre- and postoperatively, during the patients' stay in hospital. Participants completed the Spinal Appearance Questionnaire (SAQ), Body Esteem Scale (BES) and Strengths and Difficulties Questionnaire-25 (SDQ-25). Body image was also assessed using a virtual reality-based application “Avatar Scoliosis 3D”. Results: The difference between the desired and objective, actual body shape is significant preoperatively both in the CBTSS and CSS at p

Agriculture sector is the backbone of developing countries for their economy. Growing world’s population is putting more pressure on agriculture sector and there is a need to develop new technology to address the crises of food safety and food shortage. Today’s agriculture has been entered in a new era where nanotechnology works as a technological advancement regarding entire agriculture crops, and food sector revolution, even though, it has prodigious applications in food production, food processing, food packaging, food storage and economic growth of industries. Moreover, nanotechnology is the best solution to solve problems related to better food and agriculture. Likewise, biotechnology, nanotechnology also raised high concerns upon safety on biodiversity, health and environment. Nanotechnology is providing efficient alternatives to increase the crop production by managing the insect/pests in agriculture in an eco-friendly manner. It also promotes plant efficiency to absorb nutrients. However, the concerns are very high regarding regulation, safety and approval of nanotechnology products by risk assessment authorities. The suggested review includes stupendous applications of nanotechnology in food and agriculture sector along with its prospective merits and associated risks.

Background/Objectives Gastroparesis, a chronic digestive disorder characterized by delayed gastric emptying, often results from diabetes, post-surgical complications, autoimmune diseases, and neurological disorders. In approximately 50% of cases, the cause is idiopathic gastroparesis (IGD). Recent studies suggest a link between chronic enteroviral infections and persistent gas-trointestinal symptoms, including delayed gastric emptying. This study investigates the effects of a silydianin-rich extract from Silybum marianum seeds on enteroviral infections in vitro and the mitigation of delayed gastric emptying in mice. Silydianin, a key bioactive compound known for its liver-protective and antioxidant properties, has not been extensively studied for its impact on enteroviral infections and gastroparesis; Methods NMR spectroscopy (¹H, ¹³C, and DEPT) identi-fied silydianin as the primary compound, with minor flavonolignans and trace amounts of an oxidation product. The study assessed the cytotoxicity and antiviral activity of the extract at various stages of the viral life cycle, including virucidal activity, cell protection, and post-infection effects, using neutral red assays in RD cells, with results confirmed by real-time PCR. The viruses studied included Coxsackievirus B2, Coxsackievirus A10, Poliovirus SL-1, and Enterovirus EV71. The impact on delayed gastric emptying was evaluated in a mouse model of gastroparesis using doses of 100 and 200 mg/kg compared to a control; Results: The silydianin-rich extract exhibited con-sistent antiviral activity, with the highest selectivity index (SI) for EV71 (4.08) during virucidal activity. It provided moderate cell protection, with EC50 values ranging from 120.88 to 186.10 µg/mL and SI values from 2.20 to 3.39. Post-infection treatment showed varying efficacy, with Coxsackie A10 demonstrating the highest SI (3.90). In vivo, the extract at 200 mg/kg significantly improved gastric emptying to 96.47% and slightly increased gastrointestinal transit from 50.33% to 61.46%; Conclusions These results suggest that silydianin may be effective in treating enteroviral infections and enhancing intestinal function, making it a promising candidate for gastroparesis treatment and warranting further research.

Currently, the use of recycled waste plastic in road construction is not just considered ecofriendly but also considered advantageous for improving road performance over time. This research explores using recycled plastic bags, made of low-density polyethylene (LDPE), in asphalt mixtures to improve road performance and manage waste. The study aims to assess the effects of incorporating different amounts of shredded waste plastic into asphalt mixes and determine the optimal percentage. The aggregate used was obtained from Sargodha quarry Pakistan and asphalt used was 60/70 grade obtained from national refinery limited Pakistan. Using the Marshall mix design, the optimum bitumen content (OBC) was found to be 4.5% of the asphalt mix weight. Thirty samples were tested with waste plastic proportions of 6%, 8%, 10%, 12%, and 14% of OBC weight, along with a standard mix. Tests on stability, bulk density, flow, and air voids showed that a 10% plastic content significantly enhances asphalt performance, increasing stability by around 25%. The study recommends using 10% plastic by OBC weight in asphalt mixes for better performance and suggests further research on optimal incorporation techniques of waste materials in asphalt mixtures.

Globally, the fuel demand is increasing rapidly and the conventional method to produce fuel is toxic which causes environmental degradation and climate crisis. Therefore, biodiesel emerges as the substitute to overcome the conventional fuel problems because biodiesel is renewable and non-toxic. Biodiesel synthesis is the process of using fats and oils to produce biodiesel ester and glycerol. Biodiesel can be produced using edible and non-edible feedstock but using the edible feedstocks problems like fuel vs food, nutritional value and economic considerations were raised. Therefore, non-edible feedstocks are being used to overcome problems arising from edible feedstock. As non-edible feedstocks can easily be grown anywhere on land, doesn’t cause imbalance to food economy and has low cost. Many non-consumable seeds like Mahua, Jatropha, Castor, Neem etc. are used to produce biodiesel. Now a days, researchers are using nanoparticles to enhance the stability, quality, and properties of biodiesel. In future, researchers can use algae and microbial oils for production of biodiesel. Research can also use biojet fuel in such a way that it reduces the carbon emission. In future, production of biodiesel can be integrated into circular economy models to reduce environmental waste and impact. In this review we will discuss the production methods for biodiesel, catalysts for biodiesel production, and non-edible feedstock properties of biodiesel.

Breast cancer is the most widespread malignancy in women from corner to corner of the world. Nanostructured lipid carrier (NLC) proved its efficacy in the treatment of cancer. NLC loaded with Imatinib (IMA) (NANIMA) was prepared and evaluated for in vitro efficacy in MCF-7 breast cancer cells. Hot homogenization method was used for the preparation of NANIMAs. Aqueous solution of surfactants (hot) was mixed with molten mixture of stearic acid and sesame oil (hot) under homogenization. The prepared NANIMAs were characterized and evaluated for size, polydispersity index, zeta potential, encapsulation efficiency, release studies, stability studies and MTT assay (cytotoxicity studies). The optimized NANIMA revealed particle size of 104.63 ± 9.55 d.nm, PdI of 0.227 ± 0.06 and EE of 99.79 ± 0.03. All NANIMAs revealed slow and sustained release behaviour. The surfactants used in the preparation of NANIMAs exhibited their effects on particle size, zeta potential, encapsulation efficiency, stability studies and release studies. The cytotoxicity studies unveiled 8.75 times increase in cytotoxicity for optimized NANIMA (IC50 = 6 µM) when compared with IMA alone (IC50 = 52.5 µM) on MCF-7 breast cancer cells. After this, NLC containing IMA possibly will be employed for the cure of breast cancer. A lesser amount of IMA loaded NLC will be sufficient than IMA alone for the treatment of breast cancer. Moreover, the patient will exhibit not as much of adverse effects as in case of IMA alone. Consequently, NANIMA could prove to be useful for effective therapeutic outcome in breast cancer treatment.

Osteoarthritis of the hand (HOA) is one of the most common musculoskeletal diseases affecting health. Osteophytes, documented by imaging procedures are often used as diagnostic criteria. The gold standard is the radiographic image, however, more sensitive and saver methods such as ultrasound are gaining in importance. We investigated the prevalence, grade and pattern of osteophytes by high resolution ultrasound investigation (US) in a population-based cross-sectional study. Factory workers were recruited at work. 26 finger joints of each participant were examined with US with grading the occurrence of osteophytes in a semiquantitative score ranging 0-3, increasing scores indicated larger osteophytes. 427 participants (mean age 53.5 years, range. 20-79 years) were investigated, resulting in 11,000 scored joints. At least one osteophyte was found in 4,546/11,000 (41.3%) joints or 426/427 (99.8%) participants but grade 2 or 3 osteophytes were seen in only 553 (5.0%) joints. The number of os-teophyte sum score increased with age (0.18/year of age increase, p<0.001). Distal interphalange-al joints (DIP) were predominantly affected with 61%, followed by proximal interphalangeal joints (PIP) with 48%, carpometacarpal joint 1 (CMC1) with 39% and metacarpophalangeal joints (MCP) with 16%. In conclusion, US is a feasible screening tool for osteophytes and HOA. Grade 1 osteophytes are a common finding in the working population when assessed by ultrasound and their prevalence is increasing with age. Prevalence of grade 2 or 3 osteophytes is less common and reflects clini-cal presence of HOA. Follow up investigations are necessary to recognize the predictive rele-vance of early osteophytes.

The spread of micro- (MPs) and nanoplastics (NPs) in the environment has become a significant environmental concern, necessitating effective removal strategies. In this comprehensive scientific review, we examine the use of magnetic nanoparticles (MNPs) as a promising technology for the removal of MPs and NPs from water. We first describe the issue of MPs and NPs and their impact on the environment and human health. Then the fundamental principles of using MNPs for the removal of these pollutants will be presented, emphasizing that MNPs enable selective binding and separation of MPs and NPs from water sources. Furthermore, we provide a short summary of various types of MNPs that have proven effective in the removal of MPs and NPs. These include ferromagnetic nanoparticles, MNPs coated with organic polymers, as well as nanocomposites and magnetic nanostructures. We also review their properties, such as magnetic saturation, size, shape, surface functionalization and stability, and their influence on removal efficiency. Next, we describe different methods of utilizing MNPs for the removal of MPs and NPs. We discuss their advantages, limitations, and potential for further development in detail. In the final part of the review, we provide an overview of existing studies and results demonstrating the effectiveness of using MNPs for the removal of MPs and NPs from water. We also address challenges that need to be overcome, such as nanoparticle optimization, process scalability, and the removal and recycling of nanoparticles after the completion of the process. This comprehensive scientific review offers an extensive insight into the use of MNPs for the removal of MPs and NPs from water. With improved understanding and the development of advanced materials and methods, this technology can play a crucial role in addressing the issue of MPs and NPs and preserving a clean and healthy environment.

Endolysin of bacteriophage T5 (EndoT5) is a Zn2+-dependent and Ca2+-activated L-alanyl-D-glutamate peptidase that hydrolyses peptidoglycans during the destruction of the cell wall of the phage host bacterium Escherichia coli. To elucidate the mechanism of calcium activation, the spatial solution structure of EndoT5 in a complex with two ions - catalytic Zn2+ and regulatory Ca2+ (EndoT5-Zn2+Ca2+, PDB ID: 8P3A) was determined by high-resolution NMR and deposited in the Protein Data Bank. We show that coordination of the Ca2+ ion fix the spatial position of polar amino acid residues D113, N115 and S117. As a result, the intramolecular mobility of extended protein loops (residues 40-70 and 111-132) is significantly reduced compared to the mobility of these loops in the structure of an enzyme containing only a catalytic a Zn2+ ion (EndoT5-Zn2+, PDB ID: 2MXZ). In the stabilized EF-like calcium-binding loop (residues 111-132), the number of van der Waals interactions with amino acid residues of the globular core of the protein increases. The binding of the Ca2+ ion is accompanied by the selection of the functional states of both extended loops of the enzyme (residues 40-70 and 111-132), because of which EndoT5-Zn2+Ca2+ acquires the structural integrity necessary for catalysis. Therefore, the mechanism of activation of L-alanyl-D-glutamate peptidase of bacteriophage T5 by Ca2+ ions involves stabilization of the enzyme molecule in a catalytically active “open” conformation. This work sheds light on the structural grounds of the ion-dependent functional proteoforms of this interesting protein.

Background: Convectional methods for drug delivery often faces setbacks due to systemic distribution, short half-life and degradation of therapeutics and therefore reduce concentrations of drug available to target tissue. Nanotheranostic provide a novel method for treating and diagnosing diseases Methodology: collection and review of relevant literatureResult: while nanotheranostic offer advantage of personalized medicine and often combines diagnosis and therapy using single molecular approach, nuclear medicine relies on radioactive isotopes to diagnosed and destroys cancer cells. In both cases, nanocarriers such as lipid-based, polymer-based, drug-conjugate, inorganic nanoparticles are used to deliver drugs/probes/isotopes to target site, generating images and thereafter chemotherapy/radiotherapy begins.Conclusion: Nanotheranostic plays important role in diseases diagnostic, therapy, imaging, monitoring of disease progression / response through the use of nanocarriers. This is made possible through nanoparticles/nanocarriers that delivers drug to the target tissues/cells.

To control the volatility and reduce the electricity costs for indoor farming, the agrivoltaics agrotunnel introduced here uses: 1) high insulation for a building dedicated to vertical growing, 2) high-efficiency LED lighting, 3) heat pumps (HPs), and 4), solar photovoltaics (PV) provide known electric costs for 25 years. In order to size the PV array, this study develops a thermal model for agrotunnel load calculations and validates it using the Hourly Analysis Program and measured data so the effect of plants’ evapotranspiration can be included. HPs are sized, plug loads (i.e., water pump energy needed to provide for the hybrid aeroponics/hydroponics system, DC power running the LEDs hung on grow walls, and dehumidifier assisting in moisture condensation in summer) are measured/modeled. Ultimately, all models are combined to establish an annual load profile for an agrotunnel that is then used to model the necessary PV to power the system throughout the year. The results find that agrivoltaics to power an agrotunnel range from 40 to 50kW and make up an areas from 3.2 to 10.48 m²/m² of an agrotunnel footprint. Net zero agrotunnels are technically viable although future work is needed to deeply explore the economics of localized vertical food growing systems.

The interplay between the human gut microbiota and the peripheral immune system significantly affects the efficacy of immune checkpoint inhibitors (ICIs) in cancer therapy. Despite this profound connection, the practical implications of microbiota dysbiosis in cancer immunotherapy ICIs & and CAR-T remain intricate and poorly understood in practical terms. This paper offers a comprehensive review of current literature on the role of gut microbiota dysbiosis in tumor development, and emerging microbiota modulation interventions, with a focus on fecal microbiota transplantation (FMT). FMT is a cost-effective therapeutic avenue, particularly in addressing diseases rooted in antibiotic-resistant bacteria, such as Clostridium difficile. Here we provided insights into the applications of FMT and other gut microbiota therapies in the landscape of cancer treatment, emphasizing their influence on the tumor microenvironment and the efficacy of ICIs with suggestions for future research directions and their implications for clinical practice.

The main aim of this article is to examine the inter-relationships among the top cryptocurrencies on the crypto stock market in the presence and absence of the COVID-19 pandemic. The nine chosen cryptocurrencies are Bitcoin, Ethereum, Ripple, Litecoin, Eos, BitcoinCash, Binance, Stellar, and Tron and their daily closing price data are captured from coinmarketcap over the period from 9/13/2017 to 9/21/2020. To determine the order of integration, the Augmented Dickey-Fuller (ADF), Phillips-Perron (PP), and Kwiatkowski, Phillips, Schmidt, and Shin (KPSS) unit root tests were carried out, and all of the cryptocurrencies were found to be integrated of order 1 i.e. I(1). It has been found that there is strong evidence of a long-run relationship between Bitcoin and altcoins irrespective of whether it is pre-pandemic or pandemic period. Hence these cryptocurrencies' prices and their inter-relationship are resilient to the pandemic.

Multi-walled carbon nanotubes (MWCNTs) and graphene oxide (GO) reinforced carbon foam (CF) composite were prepared by direct pyrolysis of MWCNTs, GO and mesophase coal tar pitch. The effect of additive amount of the mixture of MWCNTs and GO on the microstruture and properties of carbon foam was analzyed by transmission electron miscroscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), Four-probe resistance meter, universal testing machine, and laser thermal conductivity tester respectively. The result shows that MWCNTs and GO had significant impact on the microstructure of carbon foam. Futhermore, the electrical, mechanical and thermal properties of carbon foam composites were significantly enhanced by increasing the additive amount. Maximum compressive strenght of 19.2 MPa and Young’s modulus of 56.8 MPa of CF composite were observed. Similarly, Highest thermal conductivity of 30.91 W/m.K and electrical conductivity of 27.2 ×103 S/m were observed at 2 wt. % of MWCNTs-GO additive loading.

LIFI was first introduce by Professor Harald Haas on July 2011. Light fidelity (LI-FI) may be a technology which uses light as a medium to travel from one place to a different. It uses Light like Light Emitting Diode (LED) visible radiation Communication (VLC) for data Transferring and Internet connection. LIFI may be a technique which uses light as a medium because it uses light to travel it's 20 times faster than any WIFI within the world. during this paper we speak about things like what's LIFI and the way it's better then WIFI why we want LIFI and What changes did bring LIFI in our Future LIFI. How it'll make IOT devices far better than before The Technique to implement LIFI and also the problem we face of implementation of LIFI

Urban environments face escalating challenges, e.g. due to uncontrolled urbanization, rapid population growth or climate changes, prompting the exploration of sustainable solutions for enhancing urban green spaces (UGS). For this reason, poplars (Populus L.), due to their rapid growth, wide range adaptability to environmental conditions and versatility of use, would have emerged as very promising. This comprehensive review synthesizes current knowledge regarding poplar's application in urban landscapes, emphasizing its multifaceted contributions and benefits. However, challenges arise from the variable lifespans of different poplar cultivars, necessitating strategic management approaches. Selecting cultivars based on growth rates, root system characteristics, and adaptability to urban conditions is pivotal. Adaptive replanting strategies, incorporating species with varying lifespans, offer solutions to maintain continual greenery in urban landscapes. Collaborative efforts between researchers, urban planners, and policymakers are essential for devising comprehensive strategies that maximize benefits while addressing challenges associated with their variable lifespans. In conclusion, harnessing poplar's potential in urban greenery initiatives requires a balanced approach that capitalizes on their benefits while mitigating challenges. Further research and adaptive strategies are crucial for sustained and effective utilization in creating resilient and vibrant urban landscapes.

Polyploidy means having more than two basic sets of chromosomes. Polyploid plants may be artificially obtained through chemical, physical and biological (2n gametes) methods. This approach allows an increased gene scope and expression, thus resulting in phenotypic changes such as yield and product quality. Nonetheless, breeding new cultivars through induced polyploidy should overcome deleterious effects that are partly contributed by genome and epigenome instability after polyploidization. Furthermore, shortening the time required from early chromosome set doubling to the final selection of high yielding superior polyploids is a must. Despite these hurdles, plant breeders have successfully obtained polyploid bred-germplasm in broad range of forages after optimizing methods, concentration and time, particularly when using colchicine. These experimental polyploids are a valuable tool for understanding gene expression, which seems to be driven by dosage dependent gene expression, altered gene regulation and epigenetic changes. Isozymes and DNA-based markers facilitated the identification of rare alleles for particular loci when compared with diploids, and also explained their heterozygosity, phenotypic plasticity and adaptability to diverse environments. Experimentally induced polyploid germplasm could enhance fresh herbage yield and quality, e.g. leaf protein content, leaf total soluble solids, water soluble carbohydrates and sucrose content. Offspring of experimentally obtained hybrids should undergo selection for several generations to improve their performance and stability.

Light is an electromagnetic radiation that has visible and invisible wavelength spectrum. The visible light can only be detected by the eyes through the optic pathways. With the presence of scalp, cranium and meninges, the brain is seen as being protected from direct exposure to light. For that reason, the brain can be viewed as a black body lying inside a black box. In physics, a black body tends to be in thermal equilibrium with its environment and can tightly regulate its temperature via thermodynamics principles. Therefore, a healthy brain inside a black box should not get exposed to light. On the contrary, photobiomodulation, a form of light therapy to the brain has been shown to have beneficial effects for some neurological conditions. The proposed underlying mechanisms are multiple. Herein we present our intraoperative findings of rapid electrocorticographic brainwave changes when the brain was shone directly with different wavelengths of light during awake brain surgery. Our findings provide literature proof on light’s ability to influence human brain energy and function. Our proposed mechanism for these rapid changes is the presence of plasma-like energy inside the brain which causes fast brain activities that are akin to lightning strikes.

Carbon dioxide capture and storage (CCS) is highly expected to be mitigating the discharges of carbon dioxide in a surrounding environment. Solvents are an integral part of CCS. So far, several solvents have been explored the interest of meeting the requirements such as accessibility, non-harmfulness, biocompatibility, recyclability, and inexpensiveness. However, most solvents face failure in fulfilling the requirements due to many factors, so, this review paper gives a brief discussion about another category of solvent, an analogue of ionic liquids (ILs) named deep eutectic solvent (DES). Extensive research has been done on DES in recent years because of their various attractive advantages, i.e., non-poisonousness, biodegradability, cheap cost and easy preparation, that make them as a promising green solvent for many industrial procedure and application, for instance, polymer synthesis, biodiesel treatment, green chemistry, electrochemistry etc. Therefore, this manuscript mainly focusses on CO2 capturing through DES in oil and gas field. In addition, the preparation and chemical structures of this novel solvent (DES) is also discussed. Moreover, a detailed study based on experimental solubility of CO2 in DESs is also reported in this article.

Originating in the Mediterranean, B. oleracea is grown all over the world and is highly valued for its nutritional value and variety in cooking. Its susceptibility to pests, diseases, and environmental stressors, however, poses significant challenges to sustaining consistent crop quality and productivity. The BASIC PENTACYSTEINE gene significantly impacts plant growth and responses to abiotic stresses. Nevertheless, little is known about its precise role and the underlying biological processes in B. oleracea. Eleven BPC genes in B. oleracea were identified by a thorough genome-wide investigation and categorized into three categories according to their structural traits and gene motifs. There were eight different chromosomes on which these BoBPCs were located. Comparative synteny analysis was used to reveal the evolutionary traits of potatoes, Arabidopsis, and B. oleracea. The BoBPC family genes in B. oleracea were found to have specific cis-elements linked to growth, stress responses, and hormone regulation when their promoter regions were studied. Cuticular wax synthesis expression revealed that all BoBZR1 genes, from wild to mutant, expressed at varied amounts in distinct types. Moreover, distinctive BoBPC gene expression patterns were found in the seven distinct tissues that were studied. Our thorough analysis shows that the BoBPC family is widely involved in B. oleracea developmental processes. The present findings provide an established theoretical basis for further exploration into the composition and roles of BoBPC in B. oleracea.

Green spaces localized in cities create favourable environmental conditions for Ixodes ricinus, the most widespread and important vector of tick-borne pathogens in Central Europe. In this study, we described the prevalence of Borrelia burgdorferi s.l. and Babesia species found in mono- and double infections among I. ricinus ticks occurring in urban areas of the city of Poznań, west-central Poland. Two tick groups were examined: (i) a group of 1,029 host-seeking ticks (460 nymphs, 289 females, and 280 males and (ii) a group of 1,268 engorged female ticks removed from 1,115 tick-infested animals, dogs and cats. The overall prevalence of B. burgdorferi s.l. found in host-seeking ticks was almost two-fold higher in comparison to ticks derived from pets (8.7 vs. 4.7%, respectively, χ2 test, P = 0.001). Borrelia afzelii and B. garinii were the most prevalent species both in ticks from vegetation (3.7% and 3.7%, respectively) and from pets (3.7% and 0.6%, respectively). Babesia infections were slightly more common in feeding ticks compared to those from vegetation (6.0 vs. 4.7%, respectively), however, the difference was not significant. Three Babesia species including Ba. microti, Ba. venatorum and Ba. canis were identified. Babesia canis and Ba. microti were the most prevalent in host-seeking (2.6% and 1.4%, respectively) and feeding ticks (2.8% and 2.2%, respectively), whereas Ba. venatorum was the rarest piroplasm. All Ba microti obtained sequences (n=42) were identical to Ba. microti genotype "Jena/Germany" that is considered as pathogenic to humans. Furthermore, the sequences of Ba. venatorum (n=17) were identical with those isolated from patients in Italy, Austria and Poland. Altogether, out of 121 Babesia-positive ticks, 19.8% were simultaneously infected with B. burgdorferi s.l. spirochetes. We found similar prevalences of co-infections in host-seeking (1.1%) as well as in feeding ticks (1.0%). In the first group, Ba. canis prevailed in coinfections (73%), mostly with B. afzelii and B. garinii, in the second group, Babesia microti dominated with B. afzelii (92.7%). This is the first finding documenting the co-occurrence of both pathogens in ticks from companion animals. The detection of Ba. microti and Ba. venatorum sequences identical to strains pathogenic to humans as well as predominance of LB spirochetes, B. afzelii and B. garinii in I. ricinus from vegetation and animals indicates that there is a potential risk of acquiring human babesiosis and/or Lyme borreliosis in urban areas of the city of Poznań. Although, the overall risk of encountering a Ba. microti and B. burgdorferi s.l. co-infected tick was low (1.0%), the potential for more severe clinical symptoms and complications deserves notice. A relatively high infection rates of Ba. canis in dog-derived ticks (3.2%) and in host-seeking ticks (2.6%), suggests that I. ricinus could potentially be involved in the circulation of this piroplasm in areas, where the competent vector, Dermacentor reticulatus is absent or rare.

Vaccination against HPV significantly reduced the incidence of HPV-related le-sions worldwide. Considering the increasingly younger age of patients in the gynaecological office and the resulting earlier sexual initiation and potentially contact with the HPV virus, doctors need to have tools to verify the diagnosis. Nowadays, women plan motherhood later, so it is necessary to consider whether sexual treatment in the form of, among others, LEEP-conization may increase the risk of premature birth or difficulty dilating the cervix during labour.For this reason, to avoid overtreatment of LSIL changes, methylation testing may be considered. In patients with histopathologically confirmed HSIL during biopsy and ultimately a lower diagnosis - i.e., LSIL or no signs of atypia - methylation turned out to be a useful tool. We performed Pap-smear, HPV genotyping, punch biopsy, LEEP-conization (if needed) and methylation test in 108 women admitted to the District Public Hospital in Poland. Women with a negative methylation test result were significantly more likely to be ultimately diagnosed with LSIL (p=0.013). This means that in 85.7% of patients with HSIL, major cervical surgery could have been avoided if methylation was negative. Methylation testing, as well as dual-staining and diagnostics detecting mRNA transcripts of highly oncogenic types of HPV, might be used in future in the diagnosis of pre-cancerous conditions, mainly of the cervix, and in HPV-dependent cervical cancer screening. The methylation test may also be used in the diagnosis and identification of lesions within the cervical canal, including those located deep within the frontal crypts, not visible even during a professional colposcopic evaluation of the cervix, as well as within the crypts of the palatine tonsils - in diagnostics of head and neck diseases.