Leucine-rich α-2 glycoprotein1 (LRG1) is a member of the leucine-rich repeat (LRR) family that was implicated in multiple diseases including cancer, aging and heart failure as well as diabetes and obesity. LRG1 plays a key role in diet-induced hepatosteatosis and insulin resistance by mediating the crosstalk between adipocytes and hepatocytes. LRG1 also promotes hepatosteatosis by upregulating de novo lipogenesis in the liver and suppressing fatty acid β oxidation. In this study, we investigated the association of LRG1 with obesity markers including leptin and other adipokines in adolescents (11-14 years; n=425). BMI-for-age classification based on WHO growth charts was used to define obesity. Plasma LRG1 was measured by ELISA while other markers were measured by multiplexing assay. Median (IQR) of LRG1 levels was higher in obese [30 (25, 38) µg/mL] and overweight [30 (24, 39) µg/mL] adolescents, compared to normal-weight participants [27 (22, 35) µg/mL]. The highest tertile of LRG1 had an OR [95%CI] of 2.55 [1.44, 4.53] for obesity. LRG1 was positively correlated to plasma levels of HsCRP (R=0.2), Leptin (R=0.2) and Chemerin (R=0.24) with p<0.001. Additionally, it was positively associated with plasma level of IL6 (R=0.17) and IL10 (R=0.14) but not TNF-α. In conclusion, LRG1 levels are increased in obese kids and associate with increased levels of adipogenic markers. These results suggest the usefulness of LRG1 as an early biomarker for obesity and its related pathologies in adolescents.

We aimed to investigate the relationship between membrane material and development of membrane fouling in a membrane bioreactor (MBR) using membranes with different pore sizes and hydrophilicities. Batch filtration tests were performed using submerged single hollow fiber membrane ultrafiltration (UF) modules with different polymeric membrane materials including cellulose acetate (CA), polyethersulfone (PES), and polyvinylidene fluoride (PVDF) with activated sludge taken from a municipal wastewater treatment plant. The three UF hollow fiber membranes were prepared by a non-solvent-induced phase separation method and had similar water permeabilities and pore sizes. The results revealed that transmembrane pressure (TMP) increased more sharply for the hydrophobic PVDF membrane than for the hydrophilic CA membrane in batch filtration tests, even when membranes with similar permeabilities and pore sizes were used. PVDF hollow fiber membranes with smaller pores had greater fouling propensity than those with larger pores. In contrast, CA hollow fiber membranes showed good mitigation of membrane fouling regardless of pore size. The results obtained in this study suggest that the surface hydrophilicity and pore size of UF membranes clearly affect the fouling properties in MBR operation when using activated sludge.

This paper reports on the optimization of thin-film coating assisted self-sustainable off-grid hybrid power generation systems for cattle farming in rural areas of Bangladesh. Bangladesh is a lower middle-income country with declining rates of poverty among its 160 million people due to persistent economic growth in conjunction with balanced agricultural improvements. Most of the rural households adopt a mixed farming system by cultivating crops and simultaneously rearing livestock. Among the animals raised, cattle are considered as the most valuable asset for the small/medium-scale farmers in terms of their meat and milk production. Currently, along with the major health issue, the COVID-19 pandemic is hindering the world’s economic growth and has thrust millions into unemployment; Bangladesh is also in this loop. However, natural disasters such as COVID-19 pandemic and floods, largely constrain rural smallholder cattle farmers from climbing out of their poverty. In particular, small and medium-scale cattle farmers face many issues that obstruct them from taking advantage of market opportunities and imposing a greater burden on their families and incomes. An appropriate measure can give a way to make those cattle farmers’ businesses both profitable and sustainable. Optimization of thin-film coating assisted self-sustainable off-grid hybrid power generation system for cattle farming is a new and forward-looking approach for sustainable development of the livestock sector. In this study, we design and optimize a thin-film coating assisted hybrid (photovoltaic-battery-generator) power system by using the Hybrid Optimization of Multiple Energy Resources (HOMER, Version 3.14.0) simulation tool. An analysis of the results has suggested that the off-grid hybrid system is more feasible for small and medium-scale cattle farming systems with long-term sustainability to overcome the significant challenges faced by smallholder cattle farmers in Bangladesh.

Due to the great nutritional and medicinal value of honey, there has been growing consumer’s preference towards honey of a known identity. However, honey now is the third food in the world subjected to adulteration. Therefore, the current study was focused on judging the identity of Sudanese honeys and checking whether there is any misdesignation from originality. Melissopalynology was used as a tool for this purpose. A number of 60 honey samples were purchased from honey sellers. Results indicated that honey bees foraged on a bio-diversified number of plant species constituted of 11 major families [Fabaceae (43.3%), being the predominant family] and 8 minor families. Respectively, 18.3% &amp; 2% of the honey samples were found to be misdesignated by the honey sellers from their botanical and geographical identities. Some samples were predicted by melissopalynology to be originated from Ethiopia by the presence of marker pollens such as Kniphofia foliosa, Guizotia abyssinica, and Acacia abyssinica an indigenous Ethiopian flora. Thus these findings proved that melissopalynology is an effective tool in judging the identity of honey and pro of being inexpensive.

Bangladesh's railway system mostly uses typical manual railway crossing technique or boom gates through its 2,955.53 km rail route all over the country. The accidents are frequently happening in the railway crossings due to not having obstacle detectable and quickly operating gate systems, and also for fewer safety measures in the railway crossing. Currently, there are very few automatic railway crossing systems (without obstacle detectors) available, however, all of them are dependent on the national power grid without a backup plan for any emergency cases. Bangladesh is still running a bit behind in the power generation of its consumption, hence it is not possible to have a continuous power supply at all times all over the countryside. We aim to design and develop a smart railway crossing system with an obstacle detector to prevent common types of accidents in the railway crossing points. We design to use two infrared (IR) sensors to operate the railway crossing systems which will be controlled by the Arduino Uno. This newly designed level crossing system will be run with the help of sustainable renewable energy which is cost-effective, eco-friendly, and apply under the national green energy policy towards achieving sustainable development in Bangladesh as a part of the global sustainable goal to face climate change challenges. We have summarized the simulated results of several renewable energy sources including a hybrid system and optimized the Levelized Cost of Energy (LCOE), and the payback periods.

MPC (Magneto-Photonic Crystal) Optimisation is a feature-rich Windows software application designed to enable researchers to analyze the optical and magneto-optical spectral properties of multilayers containing gyrotropic constituents. A set of computational algorithms aimed at enabling the design optimization and optical or magneto-optical (MO) spectral analysis of 1D magnetic photonic crystals (MPC) is reported, together with its Windows software implementation. Relevant material property datasets (e.g., the optical spectra of refractive index, absorption, and gyration) of several important optical and MO materials are included, enabling easy reproduction of the previously published results from the field of MPC-based Faraday rotator development, and an effective demonstration-quality introduction of future users to the multiple features of this package. We also report on the methods and algorithms used to obtain the absorption coefficient spectral dispersion datasets for new materials, for which the film thickness, transmission spectrum, and refractive index dispersion function are known.

A study of photovoltaic solar window technologies is reported, focusing on their structural features, functional materials, system development, and suitability for use in practical field applications, e.g. public infrastructures and agricultural installations. Energy generation performance characteristics are summarized and compared to theory-limit predictions. Working examples of pilot-trial solar window-based installations are described. We also report on achieving electric power outputs of about 25 W_p/m² from clear and transparent large-area glass-based solar windows.

In the age of next-generation computer, the role of the cloud, the internet and smart devices will become stronger. These days we all know the word smart well. This word is often used in our daily lives. The Internet of Things (IoT) will generate a variety of information from a variety of resources. It can store big data in the cloud. Fog computing acts as a signal between cloud and IoT. Fog extensions in this framework apply to material under IoT. IoT devices are called Fog nodes, which can be accessed anywhere within the network range. A blockchain is a novel way of recording in a secure sequence. Creating a new framework in the development of Internet of Things is one of the critical problems of wireless communication where solving such a problem can lead to continued growth in the use and popularity of IoT. Proposed research creates a framework for providing a framework for middleware on the internet of smart devices network for the internet of things using blockchains technology. Our great offering connects new research that integrates blockchains into the Internet of Things and provides secure Internet connection for smart devices. Blockchain (BC) Internet of Things (IoT) is a new technology that works with low-level, distributed, public and real-time leaders to maintain transactions between IoT sites. A blockchain is a series of blocks, each block being linked to its previous blocks. All blocks have cryptographic hash code, previous block hash, and its data. Transactions in BC are the basic components used to transfer data between IoT nodes. IoT nodes are a variety of portable but smart devices with embedded sensors, actuators, systems and the ability to communicate with other IoT nodes. The role of BC in IoT is to provide a process for processing secure data records using IoT nodes. BC is a protected technology that can be used publicly and openly. IoT requires this type of technology to allow secure communication between IoT nodes in different environments. Events in BC can be tracked and monitored by anyone who is certified to communicate within IoT.

The mHealth is a term that is used for mobile health supported by smart devices such as mobile phones, tablets, and wearable smart devices, etc. The smart devices strengthen the efficiency and effectiveness of interaction with patients, physicians, and specialists. Patients nowadays would like to be intimately involved in their diagnosis as well as to make more informed decisions concerning their care. It has begun to measure the success of the quality of treatment. This was a reason that patients trust mHealth to provide them with consistency in their communications with the physicians. Most wireless strategies do not measure up to this standard so that patient engagement ultimately ended up decreasing. The blockchain can boost mHealth through storing and sharing electronic data securely and transparently. It can enhance the accessibility of patient information in real-time. The Internet of Things (IoT) provides a unique identification number to every connected device such as mobile devices, medical devices, and wearable devices. This framework uses the blockchain and IoT technologies together to provide quick help to the patients, monitor remotely, reduce the cost and unnecessarily hospitalization physically and find the real diagnosis. In order to increase patient involvement, mHealth framework with blockchain and IoT technologies has built with the key objective of providing patients with full information on their treatment and diagnosis.

We present a review of the current state of the field for a rapidly evolving group of technologies related to solar energy harvesting in built environments. In particular, we focus on recent achievements in enabling the widespread distributed generation of electric energy assisted by energy capture in semi-transparent or even optically clear glazing systems and building wall areas. Whilst concentrating on the cutting-edge recent results achieved in the integration of traditional photovoltaic device types into novel concentrator-type windows and glazings, we compare the main performance characteristics reported with these achievable using more conventional (opaque or semi-transparent) solar cell technologies. A critical overview of the current status and future application potential of multiple existing and emergent energy harvesting technologies for building integration is provided.

Amorphous ferrite-type rare-earth (RE) substituted garnets and garnet-oxide nanocomposite layers are prepared on clear glass substrates by using RF magnetron sputter-deposition process. By using a combination approach employing custom-built spectrum-fitting software in conjunction with Swanepoel’s envelope method, the spectral dispersion function of optical constants and the layer thicknesses are derived accurately from the transmission spectra of the as-deposited samples. The effects of excess metal-oxides added to the base material systems during the co-deposition process are found to affect the refractive index and the optical absorption coefficients of garnet-oxide composites. A number of optical constant datasets are presented, enabling the experimentalists to design nanophotonic or integrated-optics devices employing these functional materials.

Currently, the COVID‐19 has directly affected the millions of humans lives. The symptoms of the disease involving fever, malaise, chest infection, and breathing difficulties, were identified, and its existence is continuously becoming restructured. The World Health Organization (WHO) had mentioned the wide diagnostics test besides COVID-19 that would also assist medical facilities to recognize infectious diseases as well as currently focusing efficiently on preventing and afterward defeating this viral disease. The infection is usually transmitted among human beings in direct contact, greatest through the liquid bubbles generated through cough, sneeze, or speaking. This paper reviews the COVID 19 pandemic, its history, current updates, contact tracing applications, and use of emerging technologies like the Internet of Things (IoT) and Blockchain for stopping the spreading and provide service online to the patient from a distance.

Online class now is the demand of the day as little scopes are to find out alternatives to online class in these unprecedented days caused by corona pandemic across the globe. The study was qualitative in approach and data were collected from secondary sources i.e. different newspapers and journals in the recent times along with a mini interview with students of private universities studying in different subjects over mobile phone by the researcher. Findings of the study show that though online education has a number of challenges faced by two main stakeholders; students and teachers, handling all these challenges carefully can have the chance to create a positive atmosphere in the field of education as an alternative teaching learning resulting in positive outcomes in all regards.

Blockchain (BC) in the Internet of Things (IoT) is a novel technology that acts with decentralized, distributed, public and real-time ledger to store transactions among IoT nodes. A blockchain is a series of blocks, each block is linked to its previous blocks. Every block has the cryptographic hash code, previous block hash, and its data. The transactions in BC are the basic units that are used to transfer data between IoT nodes. The IoT nodes are different kind of physical but smart devices with embedded sensors, actuators, programs and able to communicate with other IoT nodes. The role of BC in IoT is to provide a procedure to process secured records of data through IoT nodes. BC is a secured technology that can be used publicly and openly. IoT requires this kind of technology to allow secure communication among IoT nodes in heterogeneous environment. The transactions in BC could be traced and explored through anyone who are authenticated to communicate within the IoT. The BC in IoT may help to improve the communication security. In this paper, I explored this approach, its opportunities and challenges.

The COVID-19 is an exponentially growing disease that has intentioned nations to use technologies to detect the coronavirus infection. Several nations are working greatly to fight against COVID-19. Many nations have been using a range of devices to combat the pandemic, seeking information about growth, monitoring as well as the leaking the confidential information of the residents. This research aims to assist infected people online using the Internet of Things (IoT) and Blockchain technologies through smart devices. IoT-based healthcare devices gather useful information, provide additional insight through symptoms and behaviors, allow remote monitoring, and simply give people better self - determination and healthcare. Blockchain allows the secure transfer of patient health information, regulates the medical distribution network. A four-layer architecture is proposed using IoT and Blockchain to detect and prevent individuals to be COVID 19. This research provides a framework for patients with COVID-19 infectious disease and recognizes health issues and diagnoses online. Smart devices such as smartphones can install any mobile apps such as Aarogya Setu, Tawakkalna, and so on. These applications can track COVID-19 patients properly. The installation of mobile apps on smart devices focuses to reduce the time and cost and increase the performance of the infectious patient's condition. A four-layer architecture is proposed using IoT and Blockchain technologies. Many research works focus on investigating, analyzing, and highlighting the affected individuals through guiding the COVID-19 infection. Eventually, various mobile apps are recognized and addressed in this paper.

Data integrity and security are among the most essential things in this digital era performance. Digital certificates can be one solution to this problem. This research will develop the architecture of digital certificate verification and validation using blockchain. The blockchain concept for digital certificates uses three stages: requirements planning, workshop design, and implementation. Digital certificate files will be tested based on a scenario in which there could be any changes to those files, such as compressing files, changing data of files, inserting images in the file, and rotating files. This system architecture will detect any changes that could occur to the digital certificate file by using a digital signature, Keccak256 hash algorithm, and blockchain. This research shows that change detection accuracy for digital certificate files is 100%. However, there is a digital signature nature that could reduce the accuracy of change detection, and several solutions can be resolved. The average time to generate a signature using blockchain technology is 2.11 seconds, faster than 3.23 seconds when it does not use blockchain. The average time to validate a signature is 2.11 seconds without using blockchain, which is reduced to 0.22 seconds using blockchain technology. This research concludes that the architecture for digital certificate verification and validation using blockchain technology has successfully improved the security of digital certificates. Testing showed that even minor changes to a digital certificate could affect the signature, ensuring the certificate's integrity. For further research, evaluating the performance of various hash algorithms within the blockchain network is recommended.

At present, the world is now passing a very far different time than normal situation due to the COVID-19 pandemic crisis. The global life-style and human civilization is currently progressing with down-stream that affecting almost every sectors necessary for human civilizations except the current environmental situation. To control the COVID-19 spreading, most of the countries are following lockdown process that reduces human mobility, thus reducing the CO2 emission to the environment. Though the COVID-19 pandemic is a blessing for the present environment, however, the post-COVID world will face a massive thrust of energy and only conventional energy resources may not be enough to mitigate the energy demands. Solar power generation technology mainly the photovoltaic (PV) systems and their advancement can be the leading possibilities to minimize the gap between the power demand and generation. It is now time to think how we can improve the PV power generation in future and the post-COVID world. In this encyclopaedia communication, we report on Nano-technological approach to improve the conversion efficiency of GaAs solar cells. We have designed and optimized several types of nano-structured assemblies that can be implemented to reduce the front surface incident light reflection losses thus can assist to improve the conversion efficiency of GaAs solar cells.

This article examines the wavelet transforms and the machine learning methods in accelerating large eddy simulations of turbulent flows. An overarching challenge of large eddy simulations is to accurately represent the cascade of kinetic energy across the cut-off length scale. Taylor hypothesis suggests that the energy cascade occurs through the process of vortex stretching. However, Richardson hypothesis assumes the self-amplification of the strain field and a hierarchical break down of large eddies lead the energy cascade. The large eddy simulations typically employs the self-amplification of the strain in formulating subgrid models. However, several studies also proposed subgrid models based on vortex stretching. The wavelet-based coherent vortex simulation of turbulence directly accounts for vortex stretching in overall forward scatter of energy, while allowing local backscatter. The wavelet-based large eddy simulation adapts the grid to capture the creation of small-scale eddies, while adopting subgrid models based on the self-amplification of strain. The advancement of artificial intelligence in turbulence modelling is currently evolving around accelerating the numerical simulations of turbulent flow. However, there is a clear connection between the application of wavelet transfroms and neural networks for directly solving the Navier-Stokes equation, indicating some potential benefits of wavelet methods over the neural networks.

Software engineering is a comprehensive process that requires developers and team members to collaborate across multiple tasks. In software testing, bug triaging is a tedious and time-consuming process. Assigning bugs to the appropriate developers can save time and maintain their motivation. However, without knowledge about a bug's class, triaging is difficult. Motivated by this challenge, this paper focuses on the problem of assigning the suitable developer to new bug by analyzing the history of developers’ profiles and analyzing history of bugs for all developers using machine learning-based recommender systems. Explainable AI (XAI) is AI that humans can understand. It contrasts with "black box" AI, which even its designers can't explain. By providing appropriate explanations for results, users can better comprehend the underlying insight behind the outcomes, boosting the recommender system's effectiveness, transparency, and confidence. In this paper, we propose two explainable models for recommendation. The first one is an explainable recommender model for personalized developers generated from bug history to know what the preferred type of bug is for each developer. The second model is an explainable recommender model based on bugs to generate the best developer for each bug from bug history.

Microplastics, which are plastic particles smaller than 5 mm in size, are a growing environmental concern since they have been found in oceans, rivers, lakes, and even on land. These tiny particles can escape water filtration systems and end up in water bodies as well as through the degradation of the larger plastic products causing serious environmental and food safety concerns. This research represents the magnitude of this pollution, characterization of microplastic contamination, its type of polymer, and possible sources of this pollution in the rivers around Dhaka, Bangladesh. Quantitative analyses were done following the method suggested by the NOAA and other conventional methods. Among the rivers, Buriganga has the highest microplastic pollution with 3.654 items/L in surface water and 43.125 items/kg in sediment. The concentration in Shitalakshya and Turag rivers are 3.011 items/L and 2.051 items/L in surface water and 34.875 and 17.875 items/kg in sediment respectively. ANOVA test revealed a significant difference between the concentration level of microplastic in the surface water of the Burigana and Turag rivers. A positive correlation between the concentration level of microplastic in the surface water and the sediment was also found. On average 58% of the microplastics were found to be fibrous in surface water. Qualitative analyses were done to find the characteristics and chemical composition of the microplastics. Through the use of FTIR spectroscopy, the study identified different kinds of synthetic polymers in the sample including polyamide (Nylon), polyethylene (PE), polystyrene (PS), polypropylene (PP), polyethersulfone (PES), polyvinyl chloride (PVC), and polyethylene terephthalate (PET) and polyethylene were the most abundant polymer in the samples. This study involved the investigation of three distinct rivers located in the vicinity of Dhaka city

Cervical cancer is mostly diagnosed cancer of women worldwide and the second most common cancer among middle-aged women in Bangladesh. Knowledge and perception of women are considered one of the major components of prevention strategy. We carried out this survey to assess the existing knowledge level of students and their perception to the role of vaccination in preventing cervical cancer. The participants were female undergraduate students studying Public Health in a university in Chattogram city of Bangladesh. A total of 275 female students were interviewed through prescribed questionnaire possessing questions on basic information of cervical cancer, its causal agent, risk factors, prevention methods, and vaccination. We marked the responses of participants with zero for wrong answer and one for every correct answer and ranked the knowledge level of students. The mean age of study participants was 20.68 years. In total, 69.1% students possessed poor knowledge whereas, 30.9% had good knowledge. The country of students has significant association with their level of knowledge. Most of the students got information on cervical cancer from traditional media (49.8%) and doctor (30.9%) and the effect of these two sources was statistically significant on the knowledge level of students. Students mostly identified vaccination (21.1%) and Gynecological examination (14.39%) as preventing methods. However, 65.5% of them acknowledge that vaccines cannot prevent this cancer and 33.4% believe in different risks of vaccine. Although students have heard of cervical cancer the overall knowledge was insufficient and perceived negative concepts about cancer vaccine. Therefore, we recommend the initiation of educational programs on basic reproductive health and health seeking behaviour targeting young women to successfully control and prevention of this life-threatening health problem.

We report on the development of several different thin-film functional material systems prepared by RF magnetron sputtering at Edith Cowan University nanofabrication labs. We conduct research on the design, prototyping, and practical fabrication of high-performance magneto-optic (MO) materials, oxide based sensor components, and heat regulation coatings for advanced construction and solar windows.

Metallic thin-film materials and nanoparticles (mainly Silver (Ag)-based) are recently being used in many nano-technological applications including sensors, reflective heat-mirror coatings, and antibacterial coatings as well. The physical vapor deposition technique attracts significant attention for Ag-based nanocomposites with tailoring the structural and optical properties of metallic thin films thus allowing further improvements and application possibilities in various existing fields namely electronics, catalysis, magnetics, optics in alongside the environment and health and new emergent fields in, particularly thin-film coatings. This study highlights the preparation, characterization, properties, and possible future application directions of several types of Silver (Ag)-based nanocomposite thin films prepared by using physical vapor deposition techniques.

With the dramatic increase in world population, continued advances in modern greenhouse agriculture and plant growth practices are expected to help overcome the global problem of future food shortages. Next generation greenhouse design practices will need to address a range of issues, ranging from energy and land use efficiency to providing plant-optimised growth techniques. In this paper, we focus on investigating the optimum irradiation spectra matched to the lettuce species (Lactuca sativa, L.), which is commonly grown in greenhouse environments, in order to develop low-emissivity glass panes that maximize the biomass productivity of glass greenhouses. This low-emissivity glass passes the solar spectral components needed for crop growth, while rejecting other unwanted radiations, leading to significant energy savings and other beneficial effects related to greenhouse climate control, in a range of climates. This is due to reducing both the solar heat gain and photosaturation, which can raise the temperature of the crops to harmful levels. Experimental results show that substantial biomass productivity improvements in lettuce (up to ~14.7%) can be attained using spectrally optimized illumination, compared with white light irradiation. We also report on the development of advanced metal-dielectric thin-film filters that produce the optimum illumination spectrum when exposed to sunlight.

Since 2007, at the Electron Science Research Institute (ESRI) nano-fabrication laboratories, Edith Cowan University, Australia, we have devoted research efforts to the synthesis and characterization of bismuth-containing ferrite-garnet-type thin-film magneto-optic (MO) materials of different compositions. We report on the development and properties of highly bismuth-substituted iron-garnet thin films prepared by using radio frequency (RF) magnetron sputtering. We study the process parameters associated with the RF magnetron sputter deposition technique and investigate the results of optimizing process parameters and implementing several special techniques including the fabrication of co-sputtered nanocomposite films, all-garnet multilayer structures, applying oxygen plasma treatment on amorphous garnet layers just after the deposition process, and designing modifications of the annealing crystallization process and regimes for achieving the best MO properties. We demonstrated significant improvement in MO properties of Bi-containing ferrite-type garnet thin-film materials, including record-high MO figures of merit and improved conventional and un-conventional hysteresis loops of Faraday rotation. The attractive optical, magnetic, and magneto-optic properties obtained in highly bismuth-substituted iron garnet thin-film materials of multiple composition types are relevant in the context of manufacturing next-generation ultra-fast optoelectronic devices, such as light intensity switches and modulators, high-speed flat panel displays, and high-sensitivity sensors.

We report on the field testing datasets and performance evaluation results obtained from a commercial property-based visually-clear solar window installation site in Perth-Australia. This installation was fitted into a refurbished shopping centre entrance porch, and showcases the potential of glass curtain wall-based solar energy harvesting in built environments. In particular, we focus on photovoltaic (PV) performance characteristics such as the electric power output, specific yield, day-to-day consistency of peak output power, and the amounts of energy generated and stored daily. The dependencies of the generated electric power and stored energy on multiple environmental and geometric parameters are also studied. An overview of the current and future application potential of high-transparency, visually-clear solar window-based curtain wall installations suitable for practical building integration is provided.

Abstract Purpose of review: RNA therapeutics are a new and rapidly expanding class of drugs to prevent or treat a wide spectrum of diseases. We discuss the defining characteristics of the diverse family of molecules under the RNA therapeutics umbrella. Recent findings:RNA therapeutics are designed to regulate gene expression in a transient manner. For example, depending upon the strategy employed, RNA therapies offer the versatility to replace, supplement, correct, suppress, or eliminate the expression of a targeted gene. RNA therapies include antisense nucleotides, microRNAs and small interfering RNAs, RNA aptamers, and messenger RNAs. Further, we discuss the mechanism(s) by which different RNA therapies either reduce or increase the expression of their targets. Summary: We review the RNA therapeutics approved (and those in trials) to treat cardiovascular indications. RNA-based therapeutics are a new, rapidly growing class of drugs that will offer new alternatives for an increasing array of cardiovascular conditions.

Background: Media coverage of Lyme disease (LD) has led to an increase in consultations for presumed LD in Europe. However, LD is confirmed in only 10-20% of patients, with a significant number remaining in a diagnostic dead-end. Objectives: To reach a deeper understanding of how patients themselves contribute to the diagnostic process. To describe the genesis of the LD hypothesis in care pathways. Methods: In 2019, 30 patients from a prospective cohort consulting in the infectious diseases department at University Hospital in Marseille for presumed LD were recruited for semi-structured interviews. The inclusion criteria were : suffering from subjective symptoms for 6 months, no clinical or paraclinical argument suggesting current LD. The patients’ medical trajectories were collected using a biographical approach. Results: The diagnosis of Lyme disease was primarily triggered by identification with personal testimonies found on the internet. Most of patients were leading their own diagnostic investigation. The majority of participants were convinced they had LD despite the lack of medical evidence and the scepticism of their referring GP. Conclusion: GPs should first systematically explore patients’ etiologic representations in order to improve adherence to the diagnosis especially in the management of medically unexplained symptoms. Long COVID-19 syndrome challenge offers an opportunity to promote active patient involvement in diagnosis.

The Metaverse of Things (MoT) is an advanced technology that has the potential to revolutionise urban living in the present era. This article explores the advantages, uses, and transformative outcomes of MoT in smart cities. The covered subjects encompass sustainability, urban planning, citizen participation, infrastructure management, and various more. MoT integrates the Internet of Things (IoT) with metaverse technologies. The ultimate objective is to develop virtual environments that are highly interactive, interconnected, and immersive while maintaining a high level of fidelity to reality. The IoT utilises virtual reality (VR), augmented reality (AR), and other digital technologies to gather data, facilitate communication, and automate certain processes, thereby enhancing several elements of urban living. It is all a component of the metaverse. The IoT will bring about a profound transformation in the way cities gather and utilise data to enhance services and optimise efficiency. Cities that can efficiently distribute this data can enhance public safety, optimise energy usage, regulate traffic, and manage waste properly. MoT apps that utilise immersive technologies and the IoT can be used to generate more intelligent and captivating cityscapes. The implementation of MoT can greatly enhance the quality of life for residents of smart cities through improvements in transportation, healthcare, education, and community engagement. The study's author examined how smart cities utilise the IoT to enhance the daily experiences of their inhabitants. This study examines the technical structure, possible advantages, and difficulties of implementing MoT in urban settings, aiming to enhance the resilience, responsiveness, and adaptability of cities. The findings emphasise the importance of robust legislative frameworks, stringent security requirements, and well-developed infrastructure to facilitate the extensive use of MoT technology. These factors are crucial for establishing a highly interconnected and efficient urban environment.

Malignant mesothelioma is a rare proliferative cancer that develops in the thin layer of tissues surrounding the lungs. Malignant mesothelioma is associated with an extremely poor prognosis and the majority of patients do not show symptoms. The epidemiology of mesothelioma is important for the identification of disease. The primary aim of this study is to explore the risk factors associated with mesothelioma. The dataset consists of healthy and mesothelioma patients but only mesothelioma patients were selected for the identification of symptoms. The raw data set has been pre-processed and then the Apriori method was utilized for association rules with various configurations. The pre-processing task involved the removal of duplicated and irrelevant attributes, balanced the dataset, numerical to the nominal conversion of attributes in the dataset and creating the association rules in the dataset. Strong associations of disease’s factors; asbestos exposure, duration of asbestos exposure, duration of symptoms, erythrocyte sedimentation rate and Pleural to serum LDH ratio determined via Apriori algorithm. The identification of risk factors associated with mesothelioma may prevent patients from going into the high danger of the disease. This will also help to control the comorbidities associated with mesothelioma which are cardiovascular diseases, cancer-related emotional distress, diabetes, anemia, and hypothyroidism.

In terms of sustainability, cities become smart when they provide intelligent services to the inhabitants using information and communication technologies without threatening the future of the environment, economy or the society. However, the process of developing such sustainable smart services has certain challenges, especially in understanding the real needs of the people living in the city. Inhabitants of the city or the citizens are the key stakeholders in case of smart services in a city. Active involvement of the people throughout the process is a way to design such services. On the other hand, integrating sustainability, for example including environmental data to the smart city services has been found challenging. Therefore, this research discusses an approach on combining environmental data with regular smart city services and to engage city inhabitants in the process, the approach that is adapted from the concept of living lab methodology. Finally, an application has been developed to represent a smart city service following this method.

Over the last decades, the coated glass products, and especially the low-emissivity coatings have become a common building material used in modern architectural projects. More recently, these material systems became common in specialized glazing systems featuring solar energy harvesting. Apart from achieving the stability of optical parameters in multilayer coatings, it is also important to have improved control over the design of visual color properties of the coated glass. We prepare metal-dielectric composite (MDC) based multilayer thin-film structures using the RF-magnetron sputtering deposition and report on their optical and chromaticity properties in comparison with these obtained using pure metal-based Dielectric/Metal/Dielectric (DMD) trilayer structures of similar compositions. Experimentally achieved Hunter L, a, b values of MDC-based multilayer building blocks of coatings provide a new outlook on the engineering of future-generation optical coatings with better color consistency and developing approaches to broaden the range of achievable color coordinates and better environmental stability.

We report on the study of energy-harvesting performance in medium-size (400 cm²) glass-based semitransparent solar concentrators employing edge-mounted photovoltaic modules. Systems using several different types of glazing system architecture and containing embedded diffractive structures are prepared and characterized. The technological approaches to the rapid manufacture of large-area diffractive elements suitable for use in solar window-type concentrators are described. These elements enable the internal deflection and partial trapping of light inside glass-based concentrator windows. We focus on uncovering the potential of pattern-transfer polymer-based soft lithography for enabling both the improved photon collection probability at solar cell surfaces, and the up-scaling of semitransparent solar window dimensions. Results of photovoltaic characterization of several solar concentrators employing different internal glazing-system structure and diffractive elements produced using different technologies are reported and discussed.

This research project focuses on the optimization of the hybrid energy system together with the assistance of thin-film coatings aiming to achieve self-sustainable food and crop storage facilities which will run effectively with its own generated energy. An infrastructure will be designed and constructed that will comprise a hybrid power generation system accompanied by thin-film coated semitransparent and non-transparent construction materials for energy saving. Thin-film low emissivity (Low-E) type coatings will assist the transparent or semitransparent construction materials to reflect most of the infrared (IR-mostly heat) and UV spectra of sunlight without interrupting the visible spectrum and will lead to saving energy consumption by reducing the heat and lighting during day time

The software industry has adopted component-based software development (CBSD) to rapidly build and deploy large and complex software systems with significant savings at minimal engineering effort, cost, and time. However, CBSD encounters issues on security trust, mainly with respect to dependability attributes. A system is considered dependable when it can produce the outputs for which it was designed with no adverse effect on its intended environment. Dependability consists of several attributes that imply availability, confidentiality, integrity, reliability, safety, and maintainability. Dependability attributes must be embedded in a CBSD model to develop dependable component software. Motivated by the importance of these attributes, this paper pursues two objectives: to design a model for developing a dependable system that mitigates the vulnerabilities of software components, and to evaluate the proposed model. The model proposed in this study is labelled as developing dependable component-based software (2DCBS). To develop this model, the CBSD architectural phases and processes must be framed and the six dependability attributes embedded according to the best practice method. The expert opinion approach was applied to evaluate 2DCBS framing. In addition, the 2DCBS model was applied to the development of an information communication technology (ICT) portal through an empirical study method. Vulnerability assessment tools (VATs) were employed to verify the dependability attributes of the developed ICT portal. Results show that the 2DCBS model can be adopted to develop web application systems and to mitigate the vulnerabilities of the developed systems. This study contributes to CBSD and facilitates the specification and evaluation of dependability attributes throughout model development. Furthermore, the reliability of the dependable model can increase confidence in the use of CBSD for industries.

The emergence of unmanned aerial vehicles (UAVs) raised multiple concerns, given their potential for malicious misuse in unlawful acts Vision-based counter-UAV applications offer a reliable solution compared to acoustic and radio frequency-based solutions because of their high detection accuracy in diverse weather conditions. The existing solutions work well on trained datasets, but their accuracy is relatively low for real-time detection. In this paper, we model deep learning-empowered solutions to improve the multi-class UAV's classification performance using single-shot object detection algorithms YOLOv5 and YOLOv7. The transfer learning is employed for performance improvement and rapid training with improved results. We customized a multi-class dataset containing multi-rotor, fixed-wing, and single-rotor UAVs in challenging weather conditions. Experiments show that the integration of transfer learning has achieved good results, with an overall best average-classification precision of 94\%, an average recall of 93.1\%, a mAP$@$0.5 average of 95.3\%, and an average F1 score of 92.33\%. The dataset and code are available as an open source: https://github.com/ZeeshanKaleem/YOLOV5-Large-vs-YOLOV7.git

Background and Research Highlights: Despite all the concerns and initiatives, natural resources like forests, as well as biodiversity are decreasing at an alarming rate worldwide. Conservation is considered as one of the major tools to prevent such loss and rapid degradation. Evidence around the world shows the adverse effects of conservation laws and policies on indigenous peoples and other local communities. Objectives: This study was conducted in one of the forest-dependent communities situated in Sundarban (world’s largest mangrove forest) to understand the impact of conservation laws and policies on their livelihood. Materials and Methods: A qualitative methodology was designed to collect data, using focus group discussions and case study with community people, and individual interviews with the personnel from NGOs and relevant government departments. Findings: Strict conservation policies and restrictions in accessing forest resources made lives and livelihoods of the local community insecure and unstable, thus putting the community in a vulnerable situation. The had to leave their traditional mode of income and look for alternative livelihood options. Almost no evidence was found in relation to upkeeping their rights in conservation activities. Prohibited movement, provision of punishment for entering into the forest without proper permission and struggles in everyday life were some of the highlighted issues. They had no participation in conservation activities, management of alternative livelihood options, and even they were not sensitized before putting restrictions. Although they had a history of emotional and physical attachment with the forest, existing activities did not consider these issues. In addition, corruption and abuse of power by law enforcement agencies towards the local community intensified the sufferings. Conclusion: This study argues that the realization of human rights in conservation activities and the sensitization of the implementing stakeholders are prerequisites for ensuring the sustainability of both biodiversity and the affected people.

This work is devoted to physical vapor deposition synthesis, and characterisation of bismuth and lutetium-substituted ferrite-garnet thin-film materials for magneto-optic (MO) applications. The properties of garnet thin films sputtered using a target of nominal composition type Bi_0.9Lu_1.85Y_0.25Fe_4.0Ga₁O₁₂ are studied. By measuring the optical transmission spectra at room temperature, the optical constants and the accurate film thicknesses can be evaluated using Swanepoel’s envelope method. The refractive index data are found to be matching very closely to these derived from Cauchy’s dispersion formula for the entire spectral range between 300-2500 nm. The optical absorption coefficient and the extinction coefficient data are studied for both the as-deposited and annealed garnet thin-film samples. A new approach is applied for accurately deriving the optical constants data simultaneously with the physical layer thickness, using a combination approach employing custom-built spectrum-fitting software in conjunction with Swanepoel’s envelope method. MO properties, such as specific Faraday rotation, MO figure of merit and MO swing factor are also investigated for several annealed garnet-phase films.

Capital structure decision plays an imperative role in firm’s performance. Recognizing the importance, there has been many studies inspected the rapport of capital structure with performance of firms and findings of those studies are inconclusive. In addition, there is relative deficiency of empirical studies examining the link of capital structure with performance of banks in Bangladesh. This paper attempted to fill this gap. Using panel data of 22 banks for the period of 2005-2014, this study empirically examined the impacts of capital structure on the performance of Bangladeshi banks assessed by return on equity, return on assets and earnings per share. Results from pooled ordinary least square analysis show that there are inverse impacts of capital structure on bank’s performance. Empirical findings of this study is of greater significance for the developing countries like Bangladesh because it will call upon concentration of the bank management and policy makers to pursue such policies to reduce reliance on debt and to accomplish optimal level capital structure. This research also contributes to empirical literatures by reconfirming (or otherwise) findings of previous studies.

Identifying influential actors within social networks is pivotal for optimizing information flow and mitigating the spread of both rumors and diseases. Several methods have emerged to pinpoint these influential entities in networks that are represented as graphs. In these graphs, nodes corre-spond to individuals and edges indicate their connections. This study focuses on centrality measures, prized for their straightforwardness and effectiveness. We categorize structural central-ity into two: local, considering a node's immediate vicinity, and global, accounting for overarching path structures. Some techniques blend both centralities to highlight nodes influential at both mi-cro and macro levels. Our paper presents a novel centrality measure, accentuating node degree and incorporating the network's broader features, especially paths of different lengths. Through Spearman and Pearson's correlations tested on seven standard datasets, our method proves its merit against traditional centrality measures. Additionally, we employ the SIR model, portraying disease spread, to further validate our approach. The ultimate influential node is gauged by its capacity to infect the most nodes during the SIR model's progression. Our results indicate a nota-ble correlative efficacy across various real-world networks relative to other centrality metrics.

As prominent oil producers, the Gulf Cooperation Council (GCC) countries have played a significant role in the global energy market. However, as the world's attention increasingly shifts towards environmental sustainability, understanding the implications of the GCC's economic activities on CO2 emissions becomes indispensable. This research paper investigates the relationship between specific economic indicators and their impact on CO2 emissions in the GCC from 2001 to 2021. The study employs quantile regression, a powerful statistical method that estimates the conditional quantiles of a response variable given a set of predictor variables. The findings reveal several important insights: Financial institution efficiency is significant and negative at a 1% level at the lower (10th) -83537.3 and the higher quantile (90th) -549002.3. The relationship between GDP per capita and CO2 emissions varies across quantiles, highlighting the complexity of the growth-environment nexus. Total patents exhibit a positive and significant relationship with emissions, underscoring the importance of directing innovation towards environmentally sustainable solutions. Renewable energy consumption displays a nuanced relationship with CO2 emissions, with a stronger negative impact observed at higher consumption levels. This underscores the potential of renewable energy to mitigate emissions when integrated at scale. The study's outcomes hold crucial policy implications for the GCC countries as they seek to align economic growth with environmental sustainability. The findings emphasize the importance of fostering financial institution efficiency, promoting green innovation, and expanding renewable energy sources to reduce emissions

Keywords: Knowledge; Attitudes; Practices; Salt intake.

At present there is a renewed interest in theories of ”modified” gravity. Here, under a more drastic modification enforced by Galilei group, we obtain a completely new gravitational structure, and which exists in addition to the already available general relativity of today. Correlated with this, we show that in addition, there is a new ”modified” quantum mechanics, in as much as it exists as an independent and new ”pure” non-relativistic quantum me- chanics, and which has no relativistic counterpart. This is in addition to the present quantum mechanics, where the relativistic and non-relativistic structures are counterparts of each other. The above holds, firstly due to the correlation between Galilei group and quantum mechanics. These math- ematical conclusions are consolidated by the fact that there exists a physical Majorana interaction between each neutron- proton pairs in nuclei. Galilei invariance of Majorana exchange in Majorana interaction, shows that the mass here is of pure gravitational nature, and which is immune to the other three forces. This makes an amazing connection between the gravitational force and the quantum mechanics. This pure gravitational mass would man- ifest itself as dark matter of the universe. It is our new modified gravity that generates the dark matter.

Despite being under development for decades, RNA therapeutics have only recently emerged as viable platform technologies. The COVID-19 mRNA vaccines have demonstrated the promise and power of the platform technology. In response, novel RNA drugs are entering clinical trials at an accelerating rate. As the skin is the largest and most accessible organ, it has always been a preferred target for drug discovery. This holds true for RNA therapies as well, and multiple candidate RNA-based drugs are currently in development for an array of skin conditions. In this mini review, we catalog the RNA therapies currently in clinical trials for different dermatological diseases. We summarize the main types of RNA-related drugs and use examples of drugs currently in development to illustrate their key mechanism of action.

Global rapidly evolving events, e.g., COVID-19, are usually followed by countermeasures and policies. As a reaction, the public tends to express their emotions on social media platforms. Therefore, predicting emotional responses to events is critical to put a plan to avoid risky behaviors. This paper proposes a machine learning-based framework to detect public emotions based on social media posts in response to specific events. It presents a precise measurement of population-level emotions which can aid governance in monitoring public response and guide it to put in place strategies such as targeted monitoring of mental health, to react to a rise in negative emotions in response to lockdowns, or information campaigns, for instance in response to elevated rates of fear in response to vaccination programs. We evaluate our framework by extracting 15,455 tweets. We annotate and categorize the emotions into 11 categories based on Plutchik’s study of emotion and extract the features using a combination of Bag of Words and Term Frequency-Inverse Document Frequency. We filter 813 COVID-19 vaccine-related tweets and use them to demonstrate our framework’s effectiveness. Numerical evaluation of emotions prediction using Random Forest and Logistic Regression shows that our framework predicts emotions with an accuracy up to 95%.

The research aims to discover the natural occurrence of patulin (PAT) in selected citrus fruits from the central cities of Punjab and Pakistan's Northern cities. Total 2970 samples of twelve citrus fruits; kinnow, orange, grapefruits, bitter orange, mausami, red blood, pineapple, sweet orange, rough lime, sweet lime, kagzi lime and lemon were examined using liquid chromatography fitted with UV detector. The limit of detection (LOD) and quantification limit was 0.04 and 0.12 µg/kg, respectively. The results have shown that 56% of samples of citrus fruits from Punjab's central cities, Pakistan, were discovered to be infected from PAT. The elevated amounts of PAT ranging from 0.04 to 1150 µg/kg were found in citrus fruit samples from Multan cities. Furthermore, 31.7% of samples of citrus fruits from Northern cities of Pakistan were discovered to be infected with PAT, and the elevated amounts were found ranging from 0.04-320 µg/kg from Swat city. About 22.1% of samples of citrus fruits have levels of PAT greater than the suggested limits established by the European Union (EU). PAT's dietary intake levels ranged from 0.10-1.11 µg/kg bw/day from the central cities of Punjab, Pakistan, and 0.13-1.93 µg/kg bw/day were documented from Northern cities of Pakistan.

The study focused on investigating the natural incidence of deoxynivalenol (DON) in corn and products from corn producing districts of Punjab, Pakistan. The analysis was carried out using HPLC with UV detector and immunoaffinity cleanup columns. The detection limit (LOD) and limit of quantification were 25 and 50 µg/kg, respectively. Total 1220 samples of corn and products were analyzed to detect the DON, and 539 (44.2%) samples were observed to be contaminated with DON (n ≥ LOD). Furthermore, 92 (7.5%) samples of corn & products have DON levels, elevated than the proposed limits of the EU. The data is significantly different from a normal distribution for DON in corn and products samples and from different locations (p < 0.05) for Shapiro-Wilk and Kolmogorov-Smirnov values. However, a significant difference in DON levels was found between corn and corn derived-products types (p ≤ 0.05). The lowest and highest exposure & hazard quotient (HQ) of 0.92 and 9.68 µg/kg bw/d were documented in cornflour samples.

Magneto-optic (MO) imaging and sensing are at present the most developed practical applications of thin-film MO garnet materials. However, future component and system-level sensors and imagers technology improvements are still necessary in order to improve sensitivity for a range of established and also the forward-looking applications. These improvements are expected to originate from new material system development. We propose a set of technological modifications for the RF-magnetron sputtering deposition and crystallization annealing of magneto-optic bismuth-substituted iron-garnet films and investigate the improved material properties. Results show that standard crystallization annealing for the as-deposited ultrathin (sputtered 10 nm thick, amorphous phase) films resulted in more than a factor of two loss in the magneto-optical activity of the films in visible spectral region, compared to the liquid-phase grown epitaxial films. Results also show that an additional 10 nm-thick metal-oxide (Bi2O3) protective layer above the amorphous film results in ~2.7 times increase in the magneto-optical quality of crystallized iron-garnet films. On the other hand, the effects of post-deposition oxygen (O2) plasma treatment on the magneto-optical (MO) properties of Bismuth substituted iron garnet thin films material is investigated. Results show that, in the visible part of the electromagnetic spectrum (at 532 nm), the O2 treated (up to 3 minutes) garnet films retain higher specific Faraday rotation and figure of merit than those of non-treated garnet films.

This study was performed to evaluate the efficacy of nicotinic acid against Streptococcus pneumoniae biofilm. The experimental results indicate that S. pneumoniae forms biofilms, particularly at the liquid-air interface, as evidenced by the pellicle assay. Nicotinic acid demonstrated significant inhibition of S. pneumoniae biofilm formation at 6 h and 18 h, with higher concentrations leading to lower biofilm biomass, suggesting a concentration-dependent response. However, minimal biofilm inhibition was observed at 12 h. Treatment with nicotinic acid induced FTIR spectral changes in protein biomolecules of S. pneumoniae biofilm at 6 h and 18 h, evidenced by alterations in spectral peaks at 750 cm-1, 906 cm-1, 1540 cm-1, 1548 cm-1, and 1644 cm-1. Notably, no FTIR spectral changes were detected in 12 h S. pneumoniae biofilm following exposure to nicotinic acid. These findings suggest that nicotinic acid inhibits biofilm formation in a time and concentration-dependent manner, possibly by altering the structure of protein biomolecules within the biofilm.

Hand gesture recognition has many valuable applications in engineering and health care. This study proposes a novel model which can accurately distinguish hand gestures using forearm muscles' surface electromyogram (sEMG) signals. A deep learning algorithm with hyper parameters impacting the final model’s accuracy and a convolutional neural network (CNN) were employed in the recognition stage. The number of convolutional layers, kernels per layer, and neurons in the dense layer were selected for optimization, while the remaining parameters, such as the learning rate, batch size, and number of epochs, were chosen based on trial and error and prior knowledge. The optimal values for the selected hyperparameters were obtained using a genetic algorithm to achieve maximum recognition accuracy. The UC2018 Dual-Myo database was used for training and testing the model based on EMG signals characterizing the activity of eight different hand gestures. The final structure of the model consisted of two convolutional layers with 131 and 28 kernels, a dense layer with 111 neurons, and a softmax layer with eight neurons. Upon optimizing the hyperparameters using the genetic algorithm, the accuracy of the proposed model increased from 91.86% to 96.4% at best and 95.3% on average in real-time applications and 99.6% in an offline mode. Future work is warranted towards improving the architecture and the computational cost.

Wind energy is a rapidly expanding renewable energy technique. Wind farm developers need to understand the interaction between wind farms and the atmospheric flow over complex terrain. Large-eddy simulations provide valuable data for gaining further insight into the impact of rough topography on wind-farm performance. In this research, we investigate the influence of spatial heterogeneity on wind turbine performance. We conducted numerical simulations of a 12×5 wind-turbine array on various rough topographies. First, we evaluated our LES method through mesh convergence analysis, using mean vertical profiles, vertical friction velocity, and resolved and subgrid-scale kinetic energy. Next, we analyze the effects of surface roughness and dispersive stresses on the performance of fully developed large wind farms. Our results demonstrate that the ground roughness element’s flow resistance boosts large wind-farm power production by almost 68% in fully aerodynamic rough surface compared to flat terrain. Dispersive stress analysis revealed that the primary degree of spatial heterogeneity in the wind farm is in the streamwise direction, which is the “wake-occupied” region, and the relative contribution of dispersive shear stress is almost 45% to the overall drag. We also observed that the power performance of the wind farm in complex terrain outperforms the drag. Our study has implications for improving the design of wind turbines and wind farms in complex terrain to increase their efficiency and energy output.

Non-woody forest products play a vital role in the economic uplifts of the local communities living in forest areas. This study was conducted in the Shishikoh Valley, district Chital to identify the economic importance of the Chilghoza nuts. The study was based on interviews and questionnaires, and a total of 50 questionnaires were collected from the whole valley. The results showed that before 2003, the people were unaware of the high economic value of the Chilghoza nuts, they used to sell the Chilghoza nuts at a very low price (US$ 1.7 to 2.4 per bag: approximately 5 Kg) and harvest it for fuelwood purposes. After the IPRP interventions, training and awareness, the local people started conservation of Chilghoza trees and sustainable cone harvesting. The total collection and sell out of Chilghoza nuts in the Shishikoh valley jumped to 87.9 tons and US$ 7.64/kg in 2005 from 32.7 tons and US$ 0.34-0.48/kg, respectively. This study concludes that IPRP interventions improved the economic values of Chilghoza nuts as well as the living standards of the local people.

The occurrence and ability of Salmonella typhimurium to withstand the effects of various antibiotics has been extensively recorded. This highlights the necessity for alternative methods to combat Salmonella infections. The current investigation aimed to ascertain the impact of benzoic acid on the extent of surface coverage and biomass of S. typhimurium biofilm after 48 and 72 hours. The findings indicated that all the different doses of benzoic acid (ranging from 3.125% to 50%) resulted in a decrease in the extent of biofilm surface coverage. Benzoic acid exhibited a substantial inhibitory effect on the biofilm biomass at all concentrations. Higher concentrations of benzoic acid led to a decrease in biofilm biomass, suggesting a concentration-dependent response. This finding implies that benzoic acid is effective in managing Salmonella infections.

The concept of friction damper is widespread technique and used to reduce the structural vibrations in many industrial applications. These friction dampers are generally coated with low wear rate materials to reduce the fretting wear. This paper investigates the use of physical vapor deposition (PVD) nitride based AlTiN coating material applied over the stainless steel friction damper to enhance the damping capacity and to reduce the fretting wear. A friction test rig has been developed to measure the dynamic hysteresis characteristics of friction damper at high temperature (700 °C). The damping capacity and fretting wear analysis is carried out at room temperature, 300 °C and 600 °C. The force versus displacment characterisitcs curve is used to predict the damping capacity and fretting wear analysis is carried out at microscopic level for the comparision. It is observed that at room temperature AlTiN coated friction damper has not much influence to improve the damping capacity and to reduce the fretting-wear. However, at high temperature it has better damping capacity and less wear in comparision to uncoated friction damper. Wear behaviour in coated and uncoated damper is different at room temperature and at elevated temperature.

The effect of transition metal substitution for Fe and the structural and magnetic properties of Gd2Fe16Ga0.5TM0.5 (TM=Cr, Mn, Co, Ni, Cu, and Zn) compounds were investigated. Rietveld analysis of X-ray diffraction indicates that all the samples crystallize in the hexagonal Th2Ni17 structure. The lattice parameters: a, c and unit cell volume show TM ionic radii dependence. Both Ga and TM atoms show preferred site occupancy for 12j and 12k sites. The saturation magnetization at maximum room temperature was observed for Co, Ni, and Cu of 69, 73, and 77 emu/g, respectively while minimum value was observed for Zn (62emu/g) doping Gd2Fe16Ga0.5TM0.5. Highest Curie temperature of 590 K was observed for Cu doping which is 15% and 5% and thesehigher than Gd2Fe17 and Gd2Fe16Ga compounds, respectively. The hyperfine parameters viz. hyperfine field and isomer shift, show systematic dependence on the TM atomic number. The observed magnetic and Curie temperature behavior in Gd2Fe16Ga0.5TM0.5 is explained on the basis of Fe(3d)-TM(3d) hybridization. The superior Curie temperature and magnetization value of Co, Ni, and Cu doped Gd2Fe16Ga0.5TM0.5 compounds as compared to pure Gd2Fe17 or Gd2Fe16Ga makes Gd2Fe16Ga0.5TM0.5 a potential candidate for high-temperature industrial magnet applications.

The study examined the learner autonomy in EFL learning at the undergraduate level in the context of Bangladesh. It investigated the effectiveness of learner autonomy on EFL learning. Besides, it explored the factors affecting autonomous learning in English language class. This study adopted a mixed- method approach. Data were collected from 60 students who had just completed their second semester at a private university in Dhaka city. The respondent students attended the compulsory English foundation course including their two semesters. Data were also collected from 12 ELT teachers teaching at the tertiary education level. Five EFL classes were observed following a sample of classroom observation schedule. Both open-ended and closed-ended questionnaires were used by the researchers for collecting the data from the students and teachers. Major findings of the study showed that lack of confidence, teachers’ dependency, lack of motivation, short-term goals in learning, huge confusions and confinement in memorization, tendency of using mother tongue and unawareness to self-evaluation of students affected learner autonomy in EFL learning of the undergraduate students. However, the study revealed that motivated students hardly faced any difficulties in achieving maximum outcomes with autonomous learning in the EFL class. Finally, the researchers gave a number of recommendations to bring out effective EFL learning with learner autonomy.

Artificial intelligence (AI) is a versatile term that is a conclusive remedy to solve the problem using past rational data after deep contemplation using these terms i-e basic statistics, carving data, familiarity with common AI algorithms. Seafood especially tiger prawn export as a busi-ness will provide enormous foreign exchange to any country if the farmers overcome the corre-lated vulnerabilities in prawn farming. This research is elucidating lacking in Tiger prawn (TP) farming like curbing of Oxygen, pH, water temperature, and nutrients, etc. Moreover, hatchery statistics in terms of juveniles will depict this study's clear picture of curbed aquaculture. For normative decisions, the Analytical Hierarchical Process (AHP) is used. The problem which has been faced by local prawn farmers that there is a stagnant TP growth in ponds, the reason is the predominant sensitivity factor in TP. For this reason, they need indemnification of thirteen fac-tors with natural resources to get the plausible results to get calmness in their lives. This study will solely focus on the TP growth model, and the monitoring effect will be established by the Artificial Intelligence algorithm. This study will employ the AHP, 0-1 scaling method, data cura-tion techniques, and ecological statistics. The life of Tiger Prawn (TP) depends upon these factors mainly, a) Physical and b) Chemical parameters. Physical parameters contain environment (E) provided to TP like season (S) and temperature (T) etc. whereas the quality of Ammonia NH3 (N) from fish waste, Oxygen level (O), and water quality hard & soft (W) lies in chemicals do-main. This research will Elucidate the factors which cause conceptual muddles in the aquamarine life of TP, for this reason, Statistical tools will assess the current result, forecast the gap. AHP will analyze the domain inputs, circumspect ramification which will depict visceral factors, later results depict which pond suits the TP. In curtail, these factors will be curbed to improve the growth of TP in a control conditioned environment.

Mangrove vegetation plays a vital role in habitat and nursing ground for different organisms and prevents coastal erosion caused by wave and tide action. In recent years the mangrove vegetation in Chattogram coast, Bangladesh, has been interrupted by other infrastructural development, which has a destructing effect on the surrounding environment. Land surface temperature analysis of an area helps learn about different environmental conditions, weather, and climate. It is also essential to monitor the rising temperature and global warming, the biggest threat to humanity. NDBI and NDVI are the efficient process for monitoring vegetation and build up areas of a geographical location. This study focused on those analyses to understand the importance of mangrove vegetation in the Salimpur area and surrounding coastal areas of Chattogram by studying the relationship between NDVI and NDBI, NDVI and LST, NDBI, and LST. The outcome indicates that a higher vegetation index results in lower land surface temperature during different periods, negatively correlated. This study also found a strong positive correlation between buildup index (NDBI) and land surface temperature (LST), which means Land Surface temperature was found higher in Buildup areas. The vegetation areas are greatly affected by the buildup areas. The correlation between buildup areas and vegetation areas was strongly negative, which means an increase of NDBI decreases NDVI, and a decrease of NDBI increases NDVI.

Acemella oleracea is known as toothache plant belongs to the family of Asteraceae. It is treated as a medicinal remedy like tuberculosis, illness, cough, rheumatism, and illness. This study was concentrated on the antioxidant, cytotoxic, antimicrobial & thrombolytic activities of methanol extract of Acmella oleracea leaves using in vitro model. The antioxidant activity was estimated as trolox equivalent antioxidant capacity utilizing the DPPH and reducing power tests. The plant extract was tested for its cytotoxic action using a brine shrimp lethality bioassay, thrombolytic activity using clot disruption, and antibacterial activity using a disc diffusion assay technique against four distinct gram-positive and gram-negative bacteria. IC₅₀ value of standard ascorbic acid for DPPH was 7.8µg/ml and the IC50 of the methanol extract of Acmella oleracea leaves was 198.34µg/ml that was moderate effect at all compare with ascorbic acid. Thrombolytic assay of Streptokinase as a positive control showed 88.49% where the extract shows 18.69% lytic activity shows the assay. In this study, the sample of LC₅₀ results of cytotoxicity assay was 1.431 µg/mL which can be treated as less activity. Moreover, the extracts showed low to moderate antibacterial activity against both gram-negative and gram-positive bacterial stains (zone of inhibition-10-26 mm). Vibrio Mimicus bacteria stains exhibited the highest level of activity, with a range of 23 for the diameter of the growth inhibition zone. The current review shows leaf extracts of Acmella oleracea may be used as a source of antioxidant and thrombolytic activity, as well as a significant source of antibacterial and anticancer substances. Further research is required to evaluate in-vivo the pharmacological activity of Acmella oleracea leaves in order to identify the essential metabolites and potential mechanisms.

Nowadays genetic algorithm (GA) is greatly used in engineering pedagogy as an adaptive technique to learn and solve complex problems and issues. It is a meta-heuristic approach that is used to solve hybrid computation challenges. GA utilizes selection, crossover, and mutation operators to effectively manage the searching system strategy. This algorithm is derived from natural selection and genetics concepts. GA is an intelligent use of random search supported with historical data to contribute the search in an area of the improved outcome within a coverage framework. Such algorithms are widely used for maintaining high-quality reactions to optimize issues and problems investigation. These techniques are recognized to be somewhat of a statistical investigation process to search for a suitable solution or prevent an accurate strategy for challenges in optimization or searches. These techniques have been produced from natural selection or genetics principles. For random testing, historical information is provided with intelligent enslavement to continue moving the search out from the area of improved features for processing of the outcomes. It is a category of heuristics of evolutionary history using behavioral science-influenced methods like an annuity, gene, preference, or combination (sometimes refers to as hybridization). This method seemed to be a valuable tool to find solutions for problems optimization. In this paper, the author has explored the GAs, its role in engineering pedagogies, and the emerging areas where it is using, and its implementation.

Berberine (BBR) is an isoquinoline that inhibits the proliferation of transformed cells in vitro, but due to its poor solubility and bioavailability, it has only moderate therapeutic potential in vivo. Increasing evidence indicates that BBR specifically targets several metabolic, signaling and gene transcription events in transformed cells, altering their progression through the cell cycle and decreasing their metabolic rate and proliferation. In order to further develop BBR as a therapeutic, its mode of cellular internalization and localization within the cell needs to be further examined. BBR’s molecular targets and interactions with kinases, transcription factors and some enzymes are discussed in an attempt to better understand BBR’s role in these important pathways and how they may lead to changes in metabolism. Lastly, this review examines some of the benefits and challenges of using BBR as an inhibitor in cancer cell proliferation in breast cancer and glioblastoma, as two examples. BBR is a potent drug with multiple targets and it is this multiplicity of function that makes BBR such a promising drug for targeting cell metabolism and proliferation.

In this work, an analog front-end (AFE) circuit for Electrocardiogram (ECG) detection system has been designed, implemented, and investigated in an industry-standard Cadence simulation framework using advanced technology node of 45 nm. The AFE consists of an instrumentation amplifier, a Butterworth band-pass filter (with fifth-order low-pass and second-order high-pass sections), and a second-order notch filter- all are based on two-stage, Miller-compensated operational transconductance amplifiers (OTA). The OTAs have been designed employing the $g_m/I_D$ methodology. Both the pre-layout and post-layout simulation were carried out. The layout consumes an area of 0.0058 mm$^2$ without the resistors and capacitors. Analysis of various simulation results were carried out for the proposed AFE. The circuit demonstrates a post-layout bandwidth of 239 Hz with a variable gain between 44 to 58 dB, a notch depth of -56.4 dB at 50.1 Hz, a total harmonic distortion (THD) of -59.65 dB (less than 1\%), an input referred noise spectral density of $

Abstract: This study explores the antibacterial and antifungal activity of four floral honey types (12 samples) (A. seyal, Zizuphus spina-christi, Cucurbita maxima and A. nilotica) as related to their phenolic content, antioxidant capacity, and assessing their cytotoxic effects. The cup-plate agar diffusion assay was employed to examine the antimicrobial potency against different pathogens including Bacillus subtilis, Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Aspergillus niger and Candida albicans. Scavenging activity, total phenolic, flavonoid contents, and cytotoxicity were determined by the DPPH radical scavenging, Folin–Ciocalteu, spectrophotometry, and Brine shrimp lethality, bioassays respectively. All assessed honeys significantly inhibited the growth of the tested pathogens. Both Acacias honey exhibited high antioxidants with IC50: 6.68 and 9.08 mg/ml respectively for A. seyal and A. nilotica. The total phenol content varied from 5.75 to 67.95 mg (GAE)/100 g while the overall flavonoid content varied from 0.15 to 0.5mg (QE)/100 g. All honey types expressed no cytotoxicity effects one cell lines. Thus the study, supports the existing antimicrobial activity of honey. However, the strong antimicrobial activity of Cucurbita and Ziziphus honeys, with their corresponded poor antioxidant furtherly provides evidence that the high levels of phenolic substances in honeys is not always the only cause of their antimicrobial potency.

Dr. Jurg Tschopp created the word "inflammasome" in 2002. Inflammasome activation and its function in disease processes have been the subject of significant investigation over the last 15 years. Four important inflammasomes have been identified: NLRP1, NLRP3, NLRC4, and AIM2. When these inflammasomes are activated, they process and secrete inflammatory cytokines such as IL-1b and IL-18, as well as cause pyroptosis, an inflammatory form of cell death. In this review, we will look at how these inflammasomes have been connected to Periodontitis pathogenesis.

Objectives: Human herpes viruses can cause life-threatening diseases in immunocompromised children, especially leukemic patients. Therefore, the aim of this study is to detect the human herpes viruses (HHV1-7) and to investigate its clinical significance in Middle Eastern Pediatric Leukemia Patients by using 2 Independent PCR assays. Methods: Detection of human herpes virus DNA has been done in blood samples of 200 pediatric leukemia patients in addition to 90 blood donors as a control group using multiplex PCR assays. When a ‘‘positive’’ result was observed, real-time PCR was performed to measure the viral load. Results: The most frequent herpes virus infection in Middle Eastern Pediatric Leukemia cases was CMV, followed by EBV, then HHV6, VZV, HHV7, HSV1, and HSV2, where they were 92/200 (46%), 76/200 (38%), 72/200 (36%), 48/200 (24%), 12/200 (6%), 8/200 (4%), and 2/200 (1%) respectively. Also, there was a statistically significance difference between leukemic patients and their controls regarding CMV, EBV, HHV6, and VZV (P <0.05). Correlation between percentage of co-infection, and clinical parameters for the 7 herpes viruses has been studied, and there is an increase in absolute neutrophilic count (ANC), total leukocyte count (TLC) and duration of fever and neutropenia in age group 6-11 years for HHV6/CMV, then in age group 12-18 years especially for EBV/CMV and CMV/HHV6. Also, our results show that multiplex PCR assay is close to single PCR assay in relation to specificity and sensitivity which in turn prove its validity for early diagnosis of herpes viral infection. Conclusions: Adopting multiplex PCR technique is helpful in screening of virus infections. It will save time, effort, cost effective and will assist in rapid diagnosis. However, the clinical relevance of the virus infection needs to be evaluated by quantitative real-time PCR which in turn will help patient's management by using appropriate antiviral treatment.

The aim of this research study was to develop hydrogels samples for using in potential biomedical applications. Hydrogels consisting of different volumes of keratin, polyvinyl alcohol (PVA), Polyvinylpyrrolidone (PVP), and starch. The keratin is derived from the chicken was the primary material on the hydrogels due to attractively for the potential wound healing application. The hydrogel samples were made by using the freeze‑thawing method, and they were examined using the Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), porosity amusement, swelling ratio and keratin release kinetic models that analyzed using (zero-order, first-order Higuchi and Korsmeyer-Peppas models). These results were indicated that feather keratin could use with formulated hydrogels suitably for controlled keratin release studies .

In addressing the challenges of data scarcity in biometrics, this study explores the generation of synthetic palmprint images as an efficient, cost effective, and privacy preserving alternative to real-world data reliance. Traditional methods for synthetic biometric image creation primarily involve orientation modifications and filter applications, with no established method specific to palmprints. We introduced the utilization of the “Style-based generator”, StyleGAN2-ADA, from the StyleGAN series, renowned for generating high-quality images. Furthermore, we explore the capabilities of its successor, StyleGAN3, which boasts enhanced image generation, facilitating smooth and realistic transitions. By comparing the performance of StyleGAN3 on public dataset, we aim to establish the most efficient generative model for this purpose. Evaluations were conducted using the SIFT (Scale-Invariant Feature Transform) algorithm into our evaluation framework. Preliminary findings suggest that StyleGAN3 offers superior generative capabilities, enhancing equivariance in synthetic palmprint generation.

The global COVID-19 pandemic has affected all spheres of human life, resulting in millions of deaths and overwhelming medical facilities. Moreover, the world has witnessed great financial hardship because of job losses resulting in economic havoc. Many sections of society have contributed in different ways to slow the spread of the virus and protect public health. For example, medical scientists are praised for their efforts to develop COVID-19 vaccines. Clinical trials have shown that the COVID-19 vaccines are highly effective in preventing symptomatic COVID-19 infections. However, many people around the world have been hesitant to get vaccinated. Vaccine misconceptions have emerged and increased due to a combination of factors, including the availability of information on the Internet and the influence of celebrities and opinion leaders. In this context, we have analyzed ChatGPT responses to relevant queries on vaccine misconceptions. The positive responses and supportive opinions provided by the AI chatbot could be instrumental in shaping people’s perceptions of vaccines and in encouraging users to get vaccinated and reduce misconceptions.

Abstract: Background: Aging is an important risk factor for cardiovascular diseases and con-vincing data has shown that chronic low-grade inflammation, which develops with advanced age, contributes significantly to cardiovascular risk. Objectives: The present study aimed to use ¹⁸F-FDG/¹⁸F-NaF-PET/CT imaging to respectively gauge arterial inflammation and microcalcifi-cation in healthy elderly and to assess the potential benefits of a tyrosol- and hydroxytyrosol-rich diet on these two markers of atherosclerotic plaque fragility. Methods: Eleven healthy partici-pants (mean age 75 ± 5.67 years) were supplemented for 6 months with high polyphenol-rich extra virgin olive oil (HP-EVOO), extra virgin olive oil (EVOO), or refined olive oil (ROO). The partic-ipants underwent PET/CT imaging with ¹⁸F-FDG and ¹⁸F-NaF radiotracers at baseline and after 6 months. ¹⁸F-FDG and ¹⁸F-NaF uptakes were quantified using standardized uptake values (SUV) and were categorized based on artery calcification and olive oil type. Results: A total of 324 slices of the aortas of the imaged participants were analyzed for arterial inflammation and 327 slices were analyzed for microcalcification. 18F-FDG uptake was significantly higher in the non-calcified segments than in the calcified segments (SUVmax = 2.70  0.62 and SUVmax = 2.54  0.44, respectively, p<0.042). Conversely, the non-calcified segments displayed significantly lower 18F-NaF uptake than the calcified segments (SUVmax = 1.90 0.37 and 2.09  0.24, respec-tively, p<0.0001). The 6-month supplementation with HP-EVOO induced a significant reduction in 18F-FDG uptake in both the non-calcified (2.93  0.23 to 2.75  0.38, p<0.004) and calcified seg-ments of the aortas (2.25  0.29 to 2.15  0.19, p<0.02). 18F-NaF uptake was also significantly low-er in patients supplemented with HP-EVOO (SUVmax = 1.98  0.33 at baseline compared to 1.85  0.28, after the 6-month supplementation, p<0.004), whereas no significant effect was observed with EVOO. Conversely, participants supplemented with ROO displayed a significant increase in 18F-NaF uptake (SUVmax = 1.78  0.34 to 1.95  0.34, p<0.0001). Conclusion: The present study confirmed that ¹⁸F-FDG/¹⁸F-NaF-PET/CT imaging is a valuable approach for assessing age-related arterial damage and demonstrated that a phenolic compound-rich diet reduces both arterial inflammation and atherosclerotic lesion microcalcification.

The present study examined the volatile composition and antimicrobial and gastrointestinal activity of the essential oils of Elettaria cardamomum (L.) Maton harvested in India (EC-I) and Guatemala (EC-G). Monoterpene were present in higher concentration in EC-I (83.24%) than in EC-G (73.03%), whereas sesquiterpenes were present in higher concentration in EC-G (18.35%) than in EC-I (9.27%). Minimum inhibitory concentrations (MICs) of 0.5 and 0.1 mg/mL were demonstrated against Pseudomonas aeruginosa in EC-I and EC-G, respectively, whereas MICs of 0.125 and 1 mg/mL were demonstrated against Escherichia coli in EC-I and EC-G, respectively. The treatment with control had the highest kill-time potential, whereas the treatment with oils had shorter kill-time. EC-I was found to be more potent in the castor oil-induced diarrhoea model than EC-G. At 100 and 200 mg/kg, EC-I exhibited 40% and 80% protection, respectively, and EC-G exhibited 20% and 60% protection, respectively, in mice, whereas loperamide (positive control) exhibited 100% protection. In the in vitro experiments, EC-I inhibited both carbachol (CCh, 1 µM) and high K+ (80 mM)-induced contractions at significantly lower concentrations than EC-G. Thus, EC-I significantly inhibited P. aeruginosa and E. coli and exhibited more potent antidiarrheal and antispasmodic effects than EC-G.

Wireless energy harvesting (EH) communication has long been considered a sustainable networking solution. However, it has been limited in efficiency, which has been a major obstacle. Recently, strategies such as energy relaying and borrowing have been explored to overcome these difficulties and provide long-range wireless sensor connectivity. In this article, we examine the reliability of the wireless-powered communication network by maximizing the net bit rate. To accomplish our goal, we focus on enhancing the performance of hybrid access points and information sources by optimizing their transmit power. Additionally, we aim to maximize the use of harvested energy by energy-harvesting relays for both information transmission and energy relaying. However, this optimization problem is complex as it involves non-convex variables and requires combinatorial relay selection indicators optimization for decode and forward (DF) relaying. To simplify this problem, we utilize the Markov decision process and deep reinforcement learning framework based on the deep deterministic policy gradient algorithm. This approach enables us to tackle this non-tractable problem, which conventional convex optimisation techniques would be difficult to solve in complex problem environments. The proposed algorithm significantly improves the end-to-end net bit rate of the smart energy borrowing and relaying EH system by 13.22%,27.57%, and 14.12% compared to the benchmark algorithm based on borrowing energy with an adaptive reward for Quadrature Phase Shift Keying, 8-PSK, and 16-Quadrature amplitude modulation schemes, respectively.

The COVID-19 has caused gigantic negative effects on populace wellbeing, society, education, and the economy in Bangladesh. The aim is to deliver a comprehensive overview of the observed and the possible impacts that could appear in the coming days. The study is based on secondary information. During the early period, due to a lack of accurate facts about the case affected and death tension up-and-down among the nations. The total number of confirmed cases is increasing following geometric patterns in Bangladesh. Dairy farmers, vegetable producers, pharmaceuticals, poultry farmers are in deep crisis due to lower prices. Also, the pandemic has seriously affected educational systems, banking, FDI, ready-made garments, remittances, etc Finally, it is not possible to mitigate the effects of pandemic individually but the integrated effort from the state authority as well as concern people of all sectors need to come forward.

This study reports fractal analysis of one-year radon in groundwater disturbances from five stations in China amid the catastrophic Wenchuan (Mw=7.9) earthquake of May 12, 2008 (day 133). Five techniques are used (DFA, fractal dimensions with Higuchi, Katz, Sevcik methods, power-law analysis) in segmented portions glided throughout each signal. Noteworthy fractal areas are outlined in the KDS, GS, MSS station data, while the portions were non-significant for PZHS and SPS. Up to day 133 critical epoch DFA-exponents have 1.5<=a<2.0 with several above 1.8. Fractal dimensions exhibit Katz’s D around 1.0-1.2, Higuchi’s D between 1.5-2.0 and Sevcik’s D between 1.0-1.5. Several power-law exponents are above 1.7 and numerous above 2.0. All fractal results of KDS-GS-MSS stations are further analysed using a novel computerised methodology which locates the exact out-of-threshold fractal areas and combines the outcomes of different methods per five, four, three, and two (maximum 13 combinations) versus nineteen Mw<=5.5 earthquakes of the area. Most different-technique coincidences are before the great Wenchuan earthquake and its post-earthquakes. This is not only with one method, but with 13 different methods. Other interpretations are also discussed.

Tropical cyclones devastate large areas, take numerous lives and damage extensive property in Bangladesh. Research on landfalling tropical cyclones affecting Bangladesh has primarily focused on events occurring since AD1960 with limited work examining earlier historical records. We rectify this gap by developing a new tornado catalogue that include present and past records of tornados across Bangladesh maximizing use of available sources. Within this new tornado database, 119 records were captured starting from 1838 till 2020 causing 8,735 deaths and 97,868 injuries leaving more than 1,02,776 people affected in total. Moreover, using this new tornado data, we developed an end-to-end system that allows a user to explore and analyze the full range of tornado data on multiple scenarios. The user of this new system can select a date range or search a particular location, and then, all the tornado information along with Artificial Intelligence (AI) based insights within that selected scope would be dynamically presented in a range of devices including iOS, Android, and Windows. Using a set of interactive maps, charts, graphs, and visualizations the user would have a comprehensive understanding of the historical records of Tornados, Cyclones and associated landfalls with detailed data distributions and statistics.

Risk assessment management have been a hot topic for the researchers since a very long time. Software risk management is an important part of project management as it contains the identification, analysis, estimation and monitoring of different risks present in the system. This helps developers in decision making while assessing the problems that could arise in the software systems. Risk management is very complex in large scale system as these systems have very complex development. The paper describes risk management techniques for large scale system. Furthermore we have provided a detailed comparative analysis of these techniques with commonly identified risks in software systems and have provided a systematic order for risk management process to ensure risk mitigation.

Whole genome duplication (WGD) or polyploidization can occur at the cellular, tissue, and organismal levels. At the cellular level, tetraploidization has been proposed as a driver of aneuploidy and genome instability, and correlates strongly with cancer progression, metastasis, and development of drugs resistance[1–6]. WGD is also a key developmental strategy for regulating cell size, metabolism, and cellular function[1,7–10]. In specific tissues, WGD is involved in normal development (e.g. organogenesis), tissue homeostasis, wound healing, and regeneration[10–17]. At the organismal level, WGD propels evolutionary processes such as adaptation[18], speciation[19], and crop domestication[20]. An essential strategy to further our understanding of the mechanisms promoting WGD and its effects is to compare isogenic strains that differ only in their ploidy. Caenorhabditis elegans (C. elegans) is emerging as an animal model for these comparisons, in part because relatively stable and fertile tetraploid strains can be produced rapidly from nearly any diploid strain[7]. Here we review the use of Caenorhabditis polyploids as tools to understand important developmental processes (e.g. sex determination, dosage compensation, and allometric relationships)[21–27] and cellular processes (e.g. cell cycle regulation, chromosome dynamics during meiosis)[28–32]. We also discuss how the unique characteristics of the C. elegans WGD model will enable significant advances in our understanding of mechanisms of polyploidization and its role in development and disease.

Mechanical robustness and high energy efficiency of composite materials are immensely important in modern stretchable, self-powered electronic devices. However, the availability of these materials and their toxicities are challenging factors. This paper presents the mechanical and energy-harvesting performances of low-cost natural rubber composites made of stearic acid-modified diatomaceous earth (mDE) and carbon nanotubes (CNTs). The obtained mechanical properties were significantly better than those of unfilled rubber. Compared to pristine diatomaceous earth, mDE has higher reinforcing efficiencies in terms of mechanical properties because of the effective chemical surface modification by stearic acid and enhanced filler-rubber interactions. The addition of a small amount of CNT as a component in the hybrid filler systems not only improves the mechanical properties but also improves the electrical properties of the rubber composites and has electromechanical sensitivity. For example, the fracture toughness of unfilled rubber (9.74 MJ/m3) can be enhanced by approximately 484% in a composite (56.86 MJ/m3) with 40 phr (per hundred grams of rubber) hybrid filler, whereas the composite showed electrical conductivity. At a similar mechanical load, the energy-harvesting efficiency of the composite containing 57 phr mDE and 3 phr CNT hybrid filler was nearly double that of the only 3 phr CNT-containing composite. The higher energy-harvesting efficiency of the mDE-filled conductive composites may be due to their increased dielectric behaviour. Because of their bio-based materials, rubber composites made by mDE can be considered eco-friendly composites for mechanical and energy harvesting applications and suitable electronic health monitoring devices.

At present, sustainability and emerging technology are the most expressed issues in any supply chain management (SCM) sector. At the same time, pandemic makes consumers more concerned regarding health, and safe food with a sustainable way to access the current market. Thus, supervision and monitoring of product quality with symmetric traceability information in fresh food and fisheries SCM is significant. Research on food safety and traceability systems based on blockchain, internet of service (IoT), wireless sensor networks (WSN), and radio frequency identification (RFID) provides the solution of constancy from production to consumption. This review focused on the RFID-based traceability systems in fisheries SCM, which have been employed globally in the last fifteen years to ensure fish quality and security. Additionally, a summarized comparison study has presented different sectors’ traceability systems using RFID and their advantages over real-time applications. The outcome of this study will help future researchers to solve the crisis in terms of trust between consumers and the fisheries SCM. Thus, this review would be a guideline and solution for enhancing the reliability of RFID-based traceability in food SCM systems to ensure the integrity and reducing the opacity and asymmetry in the product information.

Guava is a vital fruit worldwide, especially in Pakistan, and due to its nutritional value famous in each age group. Due to a very short shelf life, the marketing and export of this fruit faced severe constraints. Therefore, in the current study, edible coating of chitosan (0, 0.5, 1.0, 1.5, and 2.0%) was evaluated on postharvest shelf life when guava fruits were stored (room temperature and 4 °C temperatures) for 12 days. The chitosan treated coating fruits have shown reduced total sugars and malondialdehyde levels compared to untreated control samples. However, a significant difference (p ≤ 0.05) in total sugar and malondialdehyde levels exists between samples stored in m compared to refrigerated temperature (4 °C). The chitosan-coated samples have shown a greater amount of vitamin C, quercetin, rutin, and total phenolic contents than control samples. However, these nutritional parameters' levels were significantly different (p ≤ 0.05) in samples stored at room than samples stored at refrigerated temperature. However, the levels of crude fiber, potassium, and sodium were found statistically nonsignificant (p ≥0.05) in control versus chitosan treated coating treatments. The findings have documented that the coatings of 1.5 and 2.0% were most effective for extension in shelf life and maintaining the nutritional attributes of guava fruit.

The objectives of the current research were to determine the levels of deoxynivalenol (DON) in four different cultivars of corn and subsequently to investigate the fate of DON during pro-cessing steps involved for the production of cornbread. The samples (n = 30) of each cultivar which were found positive were selected for the study. The average level of DON was ranged from LOD to 650 µg/kg. The amount of DON in cornflour samples were ranged from LOD to 630 µg/kg and insignificantly lower than the levels found in corn grain samples (p ≥ 0.05). Further-more, the levels of DON in corn dough samples were insignificantly higher than the levels in cornflour samples (p ≥ 0.05), with levels ranged from LOD to 645 µg/kg. However, the amount of DON in cornbread samples was significantly different from the levels found in corn grains sam-ples (p ≤ 0.05), with levels ranged from LOD to 611.5 µg/kg. The percentage reduction of DON in grains to cornbread samples was 22.4%, 35.6%, 44.5%, and 42.6% in type 1, type 2, type 3, and type 4 cultivars, respectively. The highest dietary exposure and hazard quotient (HQ) of DON was 0.13 and 0.17 µg/kg bw/d, in male and female individuals resulted from the consumption of cornbread samples, respectively.

Population growth and increasing global demand for freshwater have raised a serious challenge for the depleting sources of freshwater in the 21st century. Desalination technologies can be a reliable technique for providing freshwater. Capacitive deionization is one of the innovative desalination methods that has received increasing interest. Flow-electrode capacitive deionization (FCDI) (a new architecture of capacitive deionization) is one of the efficient, cost-effective, and environmentally-friendly desalination methods for freshwater production. In this experimental research, the performance of an FCDI system was investigated and the influence of important parameters such as flow rate of flow-electrodes, electrolyte salt concentration of flow-electrodes, and initial feed water concentration will be assessed on the efficiency of desalination operation. In this study, the flow-electrodes operated in short-circuited closed-cycle operation (SCC) mode, and also the feed water operated similarly to the flow-electrodes in closed-cycle. Moreover, in all the experiments, the salt adsorption capacity (SAC) and salt removal efficiency (SRE) was calculated. Herein, by optimizing the above mentioned parameters, the salt removal efficiency of 83% and a SAC value of 29.12 mg/g dry carbon were achieved in 5 hours.

In the manufacturing industry, cutting tool failure is a probable fault which causes damage to the cutting tools, workpiece quality and unscheduled downtime. It is very important to develop a reliable and inexpensive intelligent tool wear monitoring system for use in cutting processes. A successful monitoring system can effectively maintain machine tools, cutting tool and workpiece. In the present study, the tool condition monitoring system has been developed for Die steel (H13) milling process. Effective design of experiment and robust data acquisition system ensured the machining forces impact in the milling operation. Also, ANFIS based model has been developed based on cutting force-tool wear relationship in this research which has been implemented in the tool wear monitoring system. Prediction model shows that the developed system is accurate enough to perform an online tool wear monitoring system in the milling process.

Changing climate conditions coupled with the transformations of cultivation practices and land use in sole crop-based sunflower production may significantly decline yield stability of this oilseed crop. Given that sunflower takes the third place in the world oilseed market, with 45 million tons per year, and in the fourth place in vegetable oil production, it is necessary to adapt production technologies toward sustainable agriculture. Considering that, the goal of the research was to analyze and beneficial sustainable production technology of sunflower in intercropping systems. A four-year trial was conducted in Serbia’s agroecological rain-fed conditions (45°34’23.2"N 19°86’18.9"E) using a split-plot design. Two oil types and one confectionary sunflower hybrid were intercropped with common vetch, red clover and alfalfa. Analyses showed that intercropping of sunflower with common vetch resulted in the decrease in almost all sunflower trait values. Also, sunflower × alfalfa intercropping provided to be the most appropriate. The yield of NS Gricko and Rimi PR were statistically on the same level with sole cropping, while alfalfa biomass had better results when intercropped with NS Gricko as compared to sole cropping. Concerning the general belief that yields are more stable in intercropping than in sole crop, further research in this respect is needed, in addition to the research of time and method of sowing.

Salmonella typhimurium is the predominant serovar identified in cases of salmonellosis. It is recognised for adhering to various surfaces and creating biofilm, leading to several foodborne outbreaks and antibiotic resistance. Actinomycetes are thought to possess a wide array of antibacterial characteristics that can combat different diseases. Currently, it is unclear whether it has antibiofilm properties against S. typhimurium. This study aimed to assess the antibiofilm efficacy of actinomycetes extracts against S. typhimurium ATCC 14028 by the Crystal Violet assay. Four actinomycetes isolates, EAS5, EAS7, EAA141, and EAA11, were obtained from BRIS soil in Terengganu. The actinomycetes isolates were extracted using ethyl acetate (EA). S. typhimurium was exposed to extracts for 6, 12, and 18 hours. The results showed that all EA extracts effectively prevented the S. typhimurium biofilm at 12 and 18 hours. EAAA11 was the most effective against the 12-hour biofilm, whereas EAS5 was the most effective against the 18-hour biofilm among these extracts. In conclusion, actinomycetes isolated from the BRIS soil in Terengganu show potential for controlling Salmonella infection.

The study aimed to determine the relationship between glucose, C-peptide, BDNF, and leptin between mother and fetus and neonatal weight. Methods: In the prospective observational cohort study, we included 66 women with T1DM. According to the z-score for neonatal weight, patients were divided into Healthy weight neonates (n=42) and Overweight neonates (n=24). The maternal blood samples were taken during pregnancy and cesarean section when the umbilical vein blood sample was also withdrawn. The maternal vein sera were analyzed for fasting glucose, CRP, leptin, BDNF, TSH, FT3, and FT4. The umbilical vein sera were analyzed for glucose, C-peptide, leptin, TSH, FT3, FT4, and BDNF concentration. The neonatologist measured the skinfold thickness on the third day of neonatal life. Results: A strong correlation was confirmed between maternal and umbilical vein glucose concentration and maternal glucose and C-peptide in umbilical vein blood. A negative correlation was found between the concentration of BDNF in the umbilical vein and glucose in maternal blood. A strong correlation was seen between BMI and maternal blood leptin concentration, neonatal fat body mass, and umbilical vein blood leptin concentration. Increased odds for Overweight neonates were BMI, BDNF, and TSH in the first trimester of pregnancy. Maternal leptin concentration decreased the odds of Overweight neonates. Conclusions: Maternal glucose concentrations affect the fetus’s glucose, C-peptide, and BDNF concentrations. Leptin levels increase in maternal blood due to increased body mass index, and in the neonate, its fat body mass is responsible for increased leptin concentrations.

Background: Obesity and diabetes are two metabolic disorders linked by an inflammatory process named insulin resistance (IR). Various research on the role of gut microbiota in developing obesity and its associated disorders has led to the growing interest in probiotic supplementation. Considering the life-threatening complications of diabesity this mini-review explored the effects of probiotic supplementation on IR in obesity-associated diabetes. Method: This review is based on recent articles from 2005-2020, studying the role of probiotic supplementation on glucose and insulin parameters in healthy and diabetic mouse models. Result: Probiotic supplementation altered the gut microbiota composition, increased short-chain fatty acid production, and decreased pro-inflammatory cytokines. Additionally, they decreased intestinal permeability, circulating lipopolysaccharide, and metabolic endotoxemia hence improved insulin sensitivity and reduced obesity. Although multi-strain probiotic supplementation showed greater benefits than single strain interventions, variations in the concentration of probiotics used and the duration of treatment also influenced the results. Conclusion: Probiotic supplementation could manipulate the gut microbiota by reducing intestinal permeability, inflammation and ameliorate IR and obesity-associated diabetes in animal models which requires further long-term clinical studies in humans.

In large eddy simulation (LES) of turbulent flows, the most critical dynamical processes to be considered by dynamic subgrid models to account for an average cascade of kinetic energy from the largest to the smallest scales of the flow is not fully clear. Furthermore, evidence of vortex stretching being the primary mechanism of the cascade is not out of the question. In this article, we study some essential statistical characteristics of vortex stretching and its role in dynamic approaches of modeling subgrid-scale turbulence. We have compared the interaction of subgrid stresses with the filtered quantities among four models using invariants of the velocity gradient tensor. This technique is a single unified approach to studying a wide range of length scales in the turbulent flow. In addition, it also provides a rational basis for the statistical characteristics a subgrid model must serve in physical space to ensure an appropriate cascade of kinetic energy. Results indicate that the stretching mechanism extracts energy from the large-scale straining motion and passes it onto small-scale stretched vortices.

With the ever-increasing rate, obesity has become an epidemiological problem throughout the globe comprising about 39% of the world population as of now. Among several reasons, disruption of the gut microbial ecosystem might contribute to the pathogenesis of metabolic disorders, including obesity, metabolic syndrome, type 2 diabetes, and other associated comorbidities. Though the mechanisms related to dysbiosis are unclear, diet might play a modulating role where different dietary approaches manipulate microbial richness and abundance as well as stability. For instance, shifting of Firmicutes and Bacteroidetes ratio in the gut might have a role in association with the dietary approaches and ingestion duration. Along with altered gut microbial composition, microbial metabolites such as short-chain fatty acids (SCFA) after ingestion of non-digestible dietary starches may have an impact on host metabolism by regulating lipogenesis, gluconeogenesis, and inflammation with potential associations to health and obesity. The dietary approaches like carbohydrates, fibre, protein, and/or fat diet at various arrangements can make a shift in the composition of gut microbiota if introduced for a short period. However, the unique pattern of the gut microbes usually remains the same along with the longer period of habitual diet. Though the short-term dietary intervention or circadian rhythm influences a transient change in gut microbes, other than habitual diet, the understanding related to long-term dietary change-induced permanent alterations is minimum. Alternatively, the usage of prebiotics, probiotics as well as postbiotics could be beneficial to overcome dysbiosis. This review highlights the current knowledge and the interaction between the human intestinal microbiota and diet as a modifying factor, in obesity allowing the scientists to uncover novel targets and tools to use as customized therapy.

Increased awareness of the multiple roles of RNA molecules has led to the realization that, in addition to their structural and functional roles, RNAs can be drug targets for small molecular therapy. The aim of this study was to identify multivalent amikacin specific RNA aptamers that can be a new target sites for aminoglycoside antibiotics, including amikacin using the systemic evolution of ligands by exponential enrichment (SELEX) method. Amikacin, a member of the aminoglycoside group of antibiotics, binds to specific sites in bacterial 16S ribosomal RNAs (rRNAs) and interferes with protein synthesis, leading to cell death. Here, we used the SELEX method to isolate high affinity RNA fragments (aptamers) that bind to amikacin. After five rounds of SELEX selection, in which a linear N25 DNA template was used for the first selection cycle, the resulting RNA was cloned and sequenced. Among the 38 clones generated, five groups of sequences (groups A through E) containing nine conserved motifs were identified. The sequences of groups A and B were almost identical, indicating that the selected RNA was enriched. Subsequently, the Basic Local Alignment Search Tool program was used to search for the conserved motifs in bacterial 16S rRNA sequences. Strikingly, no sequence homology was observed, suggesting that the conserved sequences (motifs) identified in this study may be novel target sites for amikacin.

The environmental impact and associated health issues have been seen as a significant global challenge. Efforts have been made to make solar cookers efficient to reduce the health risk and environmental impact of traditional cooking energy supplies used in rural areas. The solar cookers effectiveness for cooking purposes must be assessed in a specific area before installation. In essence, this paper assesses the experimental efficiency of German Scheffler, small mirror pieces, and aluminum foil based solar cookers. The solar cookers performances are evaluated at international standards by analyzing the figure of merits such as standard cooking power, sensible heating time, and exergy efficiency by using 1.7652 kg water and 1-liter oil as a heating material. The regression analysis is also performed to observe experimental data compliance with regression line. The time required to attain a water temperature of 95˚C by German Scheffler and small mirror pieces is 25 min and 1 hour with their exergy efficiency of 48.51% and 19.16% respectively, while the aluminum foil solar cooker achieves maximum water temperature of 74˚C within 2 hours and 5 minutes with 13.47% exergy efficiency. Similarly, the highest oil temperature of 275˚C is observed for the German Scheffler solar cooker. From experimental and regression results, it is revealed that German Scheffler possesses more cooking power relative to other solar cookers and their performances are highly dependent on following factors such as solar radiations, ambient temperature, environment (dust particles concentration and wind speed), radiation reflective material, aperture area, and heat losses respectively.

The aim of this research was to analyze the impact of implemented erosion control works (ECW) on soil erosion intensity in the watershed of the Ćelije reservoir (Rasina River) in the period between 1968 and 2022. The Erosion Potential Method was used to calculate the annual gross erosion (W), sediment transport (G), and erosion coefficient (Z) in the study area. As a result of the performed ECW there was a general decreasing trend in the intensity of soil erosion processes in the last 54 years. The specific annual gross erosion was 1189.12 m3/km-2/year-1 in 1968, while in 2022 it was 554.20 m3/km-2/year-1. The specific sediment transport was 540.18 m3/km-2/year-1 in 1968 and 253.55 m3/km-2/year-1 in 2022. Due to the changes in the intensity of erosion processes the specific annual gross erosion decreased by 634.92 m3/km-2/year-1, and the specific sediment transport by 286.63 m3/km-2/year-1. The erosion coefficient was reduced from Z=0.62 to Z= 0.35. A dependence between the slope of siltation and the natural bed slope was defined. The results show a significant correlation between erosion intensity and performed ECW, providing a basis for future watershed management and defining a strategy for soil erosion control in the Ćelije reservoir watershed.

Governance is one of the most essential instruments for environmental management. Biodiversity is in the core field of environmental governance. Yet environmental authorities are persistently challenged the loss of biodiversity as a very important global issue for several years due to high dependent exposure to risks. The study attempts to relook at the key governance tools that strengthen policies towards managing biodiversity within and around the national park’s survey in Moulvibazar district. The study showed that biodiversity related legislation amended was the highest in Bangladesh for the period of 2010 to 2016. The growth of policy instruments maximized at but in low environmental governance services within the same period. The study assessed that the existing environmental policy instrument is inadequate and sluggish for effective conservation, compared with several others governance tools and various performances are still below par. Governance knowledge is indispensable for biodiversity management but such knowledge is poorly identified. These results reflect the importance of effective governance for transparency that the State provides. The research is to represent a dynamic and adaptable framework that can be applied for collective governance relevant to policy integration, participation and enforcement in order to foster environmental conservation sustainability.

By shifting eating hours from daytime to nighttime, Ramadan intermittent fasting (RIF) illustrates how religious beliefs influence human dietary behavior and subsequent anthropometric and metabolic measures. This study aimed to investigate socioeconomic characteristics and examine how observing RIF affects dietary intake, anthropometric indices, and metabolic markers in healthy premenopausal (PRE-M) and post-menopausal (POST-M) Saudi women. Before starting the study, the authors hypothesized that the RIF improves some nutritional aspects and health in respondents, but not after breaking the fast.. The study includes 62 women (31 PRE-M, 21-43 years, and 31 POST-M, 44-68 years). A structured questionnaire was used to collect socioeconomic data. Physical activity, anthropometric, dietary, and biochemical assessments were undertaken before RIF and at the end of the third week of Ramadan fasting month. Socioeconomic data varied among respondents. Observing RIF was associated with significantly (at either p ≤ 0.01 or p ≤ 0.05) lower intake of calories, macronutrients, minerals (except for Na), and vitamins than before RIF for both groups. In terms of body mass index (BMI), and waist-to-height ratio (WHtR) for PRE-M, the percentage of overweight decreased significantly (p≤0.01) while obesity remained unchanged. In contrast, for POST-M, the percentage of overweight increased significantly (p≤0.05), but obesity decreased after RIF. Both groups' waist-to-hip ratio (WHR), body fat (BF), and fat mass (FM) decreased after RIF. High-density lipoprotein cholesterol (HDL-C), fasting blood glucose (FBG), triglycerides (TG), and blood pressure (SBP, DBP) were generally maintained at acceptable normal levels in most responders before and after RIF. However, low-density lipoprotein cholesterol (LDL-C) was significantly decreased during RIF than before, especially for POST-M. Age, occupation, and monthly income were the most important factors influencing women’s nutritional status and body fat. In conclusion, observing RIF by PRE- and POST-M Saudi women was associated with significant improvements in variable health indicators, with a few exceptions, particularly POST-M, and may help lower risk factors for chronic diseases.

The mutation databases have vital importance in detecting genetic mutation and their corresponding phenotypes. The emergence of next generation sequencing genetic technologies has accelerated this process, and the growth of genetic disease identification has created a need for quality control and documentation of mutation-related information. Ethnic-specific mutation databases offer valuable information for researchers, and the article evaluates the homogeneity and effectiveness of these databases. The aim to raise awareness of NEMDBs to healthcare professionals, the general public, and researchers studying genetic disorders. The article also recommendations to improve the effectiveness of these databases.

A total of 779 samples of edible nuts (melon seeds, watermelon seeds, pumpkin seeds, and cantaloupe seeds) from southern cities of Punjab, Pakistan were collected from the summer and the winter seasons. The natural occurrence of aflatoxins (AFs) and vitamin E (tocopherols) levels were investigated using HPLC. The results have shown that 180 (43.4%) samples from the winter season and 122 (33.4%) samples from the summer season were found positive with AFs. The elevated average levels of total AFs (20.9±3.10 µg/kg) were observed in watermelon seeds without shell and the lowest average amount (15.9±3.60 µg/kg) were documented in melon seeds without shell samples from the winter season. The elevated average amount of total AFs 17.3±1.50 µg/kg were found in pumpkin seeds available as without shell. The results have documented a significant difference in total AFs levels in edible seeds available as shells versus without shells (α = 0.05 & 0.01). The highest dietary intake of 6.30 µg/kg/day was found in female individuals from pumpkin seeds (without shell) in the winter season and the value of 3.00 µg/kg/day were found in pumpkin seed without shell in summer season in female individuals. The highest amount of total tocopherol levels of 22.2 ± 7.70 ng/100g in pumpkin seeds samples from winter season and 14.5 ± 5.50 mg/100g were found in melon seeds samples from summer season. The variation of total tocopherol levels in edible seeds among the winter and summer seasons showed significant difference (p ≤ 0.0054), except watermelon seeds samples which shown non-significant difference (p ≥ 0.183).

Chipless radio frequency identification (RFID) technology is expected to replace barcode technology due to its ability to read in non-line-of-sight (NLOS) situations, long reading range, and low cost. Currently, there is extensive research being conducted on frequency-coded (FC) co-polarized radar cross-section (RCS)-based tags, which are widely used. However, detecting co-polarized chipless RFID tags in cluttered environments is still a challenge, as confirmed by measuring two co-polarized tags in front of a perfect metal reflector (30.5cm×22.5cm). To address this challenge, a realistic mathematical model for a chipless RFID system has been developed that takes into account the characteristics of the reader and the tag, as well as reflections from cluttered objects. This model has been simulated and verified with measurement results by placing a single flat metal reflector behind two co-polarized one-bit designs: a dipole array tag and a square patch tag. The results showed that the interfering signal completely overlaps the ID of the co-polarized tag, severely limiting its detectability. To solve this issue, the proposed solution involves reading the tag in cross-polarization mode by etching a diagonal slot in the square patch tag. This proposed tag provides high immunity to the environment and can be detected in front of both dielectric and metallic objects.

The objective of this research was to explore the impact of a gradual replacement of Ca2+ with Mn1+ on the crystal structure of CaHPO4·2H2O, which could be beneficial for producing Ca1−xMnxHPO4·nH2O compounds. In order to prepare the starting solutions required for this study, Ca(NO3) 2·4H2O, (NH4)·2HPO4, and MnNO3·4H2O were used at various molar concentrations. The findings reveal that Mn substitutes Ca partly at low Mn/Ca molar ratios, and Mn doping reduces the unit cell of CaHPO4·2H2O. The produced biphasic compound was composed of monoclinic CaHPO4·2H2O and triclinic/monoclinic nanostructured Mn3PO4O11 after a continuous increase in the Mn/Ca molar ratio to 1. When the Ca/Mn molar ratio is 1.5, a triphasic compound of monoclinic CaHPO4·2H2O, triclinic Mn3P4O11, and Orthorhombic MnHPO4·(H2O)3 phases is formed. The formation of the monophasic MnHPO4·(H2O)3 compound was achieved by increasing the Mn/Ca molar ratio above 4. By adjusting the Mn/Ca molar ratio in the initial solutions, it is possible to produce biomaterials with specific and bespoke characteristics in the future. The Mn/Ca ratio of the starting solution can be modified to produce Ca1-xMnxHPO4-nH2O phases with weight percent compositions, as established. For the first time, Ca1−xMnxHPO4·nH2O compounds were synthesized using novel methods in this manuscript.

A total of 744 samples of vegetable seeds and oil (soybean, sunflower, canola, olive, corn, and mustard) were collected for the presence of aflatoxin B1 (AFB1) and total aflatoxins (AFs). The results have shown that 92 (56.7%) samples of branded and 108 (57%) samples of non-branded edible seeds were observed to be contaminated with AFs. The maximum mean of AFB1 and total AFs in non-branded soybean seeds was 21.01 ± 4.70 and 36.37 ± 6.10 µg/kg, respectively. Furthermore, all samples of edible seeds have concentrations of AFB1 greater than the proposed limit of European Union (EU, 2 µg/kg) and 12 (7.40%) samples of branded seeds and 14 (7.40%) samples of non-branded seeds were found in the range ≥ 50 µg/kg. About 78 (43.3%) samples of branded edible oil and 103 (48.3%) sample of non-branded edible oil were observed to be positive with AFs, and the elevated average of AFB1 (14.29 ± 2.51 µg/kg) and total AFs (25.61 ± 7.50) µg/kg were found in non-branded soybean oil samples. Furthermore, 16 (8.88%) and 6 (3.33%) samples of branded vegetable oil have levels of total AFs in a range (21 - 50 µg/kg) and ≥ 50 µg/kg, respectively. The findings have indicated significant difference of AFs levels between branded and non-branded vegetable oil samples (t = 22.274 and p = 0.000) at α = 0.05 and significant difference of AFs levels in vegetable seeds and oil samples ( t = -17.75, p = 0.000) at α =0.05. The highest dietary intake was found in non-branded sunflower oil sample (0.90 µg/kg/day) in female individuals (16-22 age group), followed by the dietary intake of 0.69 µg/kg/day body weight in male individuals (16-22 age group).

Research in brain stroke prediction is very crucial as it can lead to the development of early detection techniques and interventions that can enhance the prognosis for stroke victims. Early detection and intervention can help to minimise the damage caused by a stroke, reduce the risk of long-term complications, and enhance the general quality of life for people who have survived a stroke. Additionally, research in stroke prediction can help to identify risk factors and improve understanding of the underlying causes of stroke, which can lead to the development of better prevention strategies. Research on brain stroke prediction is ongoing and has led to the development of various models and tools for predicting the risk of stroke and detecting it early. However, the implementation and use of these tools in clinical practise vary depending on several factors, such as the availability of resources, the specific healthcare system, and the level of awareness and acceptance of these tools among healthcare providers and patients. In general, risk prediction models may be used to quickly identify individuals at high risk of stroke and target them for preventive interventions, such as lifestyle changes, medication management, and screenings. Early detection tools can be used to quickly identify stroke symptoms and initiate appropriate treatment, which can improve outcomes for stroke patients. However, it is important to note that research and development of these models and tools are ongoing, and their use in clinical practise is constantly evaluated and updated. It may take time for these tools to be widely adopted in clinical practise and to see their real-world impact. This research paper focuses on predicting brain stroke occurrence using a range of machine learning algorithms such as Logistic Regression (LR), Decision Tree (DT), Random Forest (RF), Support Vector Machine (SVM), K-Nearest Neighbor (KNN), Gaussian Naive Bayes (GNB), Bernoulli Naive Bayes (BNB), and a Voting Classifier. The main emphasis of this research was to compare the effectiveness of oversampling techniques, as the data was significantly imbalanced. We have used evaluation metrics in this research to assess the accuracy, precision, recall, and other key performance indicators of a model's predictions. Area under the Receiver Operating Characteristics Curve (AUC), minority class accuracy, and majority class accuracy were used to assess the approaches.

The complex systems that require safety are the Safety Critical Systems. Maintaining these systems is a big challenge. Now a days, safety is a very critical requirement for the latest systems. Safety critical systems must be safe. Different approaches to ensure quality and safety in safety critical systems has been discussed in this paper. A comparison is also conducted between these various approaches. Safety critical systems must remain more influential in future.