Bimetallic (or multimetallic) catalysis has emerged as a powerful tool in modern chemical synthesis, offering improved reaction control and versatility. This review focuses on the recent de-velopments in bimetallic sequential catalysis for the synthesis of nitrogen heterocycles, essential building blocks in pharmaceuticals and fine chemicals. The cooperative action of two (and sometimes more) different metal catalysts enables intricate control over reaction pathways, enhancing selectivity and efficiency of N-heterocyclic compounds synthesis. By activating less reactive substrates, this multimetal catalytic strategy opens new synthetic possibilities for challenging compounds. The use of catalytic materials in bimetallic systems reduces waste and improves atom efficiency, aligning with green chemistry principles. With a diverse range of metal combinations and reaction conditions, bimetallic catalysis provides access to a broad array of N-heterocyclic compounds with various functionalities. This paper highlights the significant progress made in the past decade in this topic, emphasizing the promising potential of bimetallic catalysis in drug discovery and the fine chemical industries.

(1) Background: Nursing homes’ preparedness in managing a public health crisis has been fragile, with effects on safety culture. The objective of this study was to assess nursing homes’ COVID-19 preparedness in Southern Portugal, including personnel’s work experiences during the pandemic. (2) Methods: We used a COVID-19 preparedness checklist to be completed by management teams, followed by follow-up calls to nursing homes. Thereafter, a survey to personnel was applied. Data analysis included descriptive statistics, exploratory factor analysis, and thematic analysis of open-end questions. (3) Results: In total, 71% (138/195) of eligible nursing homes returned the preparedness checklist. We conducted 83 follow-up calls and received 720 replies to the personnel survey. On average, 25% of nursing homes did not have an adequate decision-making structure to respond to the pandemic. Outbreak capacity and training were fragile areas among nursing homes’ contingency plans. We identified compliance with procedures and nonpunitive response to mistakes as fragile areas of safety culture, and teamwork as a strong safety area. (4) Conclusions: To strengthen how nursing homes cope with upcoming phases of the COVID-19 pandemic or future public health emergencies, nursing homes’ preparedness and safety culture should be fostered and closely monitored.

In this paper we investigate in different scenarios the feasibility of using massive multiple-input multiple-output (mMIMO) with Reconfigurable Intelligent Surfaces (RISs) to boost the throughput and coverage performances with high energy efficiency, considering sub-6 GHz, mmWave and THz bands. With that objective, a centralized radio access network (C-RAN) suitable for beyond fifth generation (B5G) systems is considered, where we integrate the base stations (BSs) with multiple RISs and devices or user equipment. RISs with a large number of quasi-passive reflecting elements constitute a low-cost approach capable of shaping the radio wave propagation and improve wireless connectivity. We consider a scenario where multiple RISs are combined with mMIMO in the uplink in order to provide connectivity to Smart City (thousands of active low power devices) wirelessly, in the 3.6GHz and 28GHz bands. We also address a scenario where RISs are adopted with mMIMO in the downlink so as to offer connectivity to a Stadium with Pitch, (thousands of active user equipment) in the 28GHz band. Finally, we have also studied the connectivity at 100GHz of a Factory where several RIS panels replacing most of the BSs equipped with mMIMO assure improved throughput and coverage. We concluded that RISs are capable of improving the performance in any of these analyzed scenarios at the different frequency bands, justifying that they are a key enabling technology for 6G.

Purpose: The goal of this article was to introduce a new technique for root coverage (RC), the Mixed-Thickness Tunnel access (MiTT), approaching a full-split design, showing the results obtained in a case series and demonstrating it step-by-step. Methods: Healthy individuals, non-smokers, and non-diabetics, who were diagnosed with gingival recession (GR) type 1 or 2 (RT1 or RT2). After all necessary evaluations, prophylaxis was performed 14 days before the surgical procedure. Then, after the basics clinical conduct and anesthesia, one or two vertical incision(s) on the mucosa (around 1-2 mm apical to the MGJ), lateral to the papilla base, were done. Initial detachment of the mucosa from the muscles (split design); it was permitted (but not mandatory) to do intrasulcular incisions; from the MGJ to coronal, subperiosteal access was done to raise the full-thickness tunnel. It must communicate up to the gingival sulcus area and the papilla’s base, keeping the papilla’s tip intact. A connective tissue graft was harvested, which was inserted through the linear incision or intrasulcularly. Interrupted sutures were done and may be used as adjunctive material. Results: Nine healthy individuals (7 females and 2 males) aged 19 and 43 years were enrolled. They were treated following the MiTT steps. There were four cases with a single GR, 2 patients with 2 teeth involved, and three with 3 or 4 GR. Seven cases were RT1 and two RT2. All RT1 cases achieved 100% RC, while the mean RC obtained for RT2 was around 80%. Conclusion: MiTT can be considered a more straightforward approach for minimally invasive surgical technique, which is a feasible option to treat RC with a high success rate, predictability, and esthetic preservation. There is a technical sensitivity to performing the full-split design procedure.

A 3D graphene foam made of interconnected multilayer graphene flakes was produced on optical fibres (OF) by laser-induced transformation of a polyimide (PI) film coated on the OF cladding. This material, known as la-ser-induced graphene (LIG), was explored in the electrochemical detection and quantification of dopamine (DA) at physiologically relevant concentrations in the presence of the most relevant interfering molecules in biological fluids, ascorbic acid (AA) and uric acid (UA). The measured limit of detection is 100 nM, the linear range is 0.1 to 5 μM and a maximum sensitivity of 5.0 µA µM−1 cm−2 was obtained for LIG decorated with Pt nanoparticles (NPs). Moreover, immunity to AA and UA interference and to fouling was attained by decorating the LIG elec-trode with Pt NPs and coating with Nafion. These figures of merit underlines the potential of these sensors for the quantification of physiologically relevant concentrations of DA in biological fluids, paving the way for the development of hybrid electrochemical/optical sensing actuating platforms in a lab-on-fibre configuration, with relevant applications in biomedical engineering. The advantages of this hybrid arrangement include the possi-bility of in-situ counterproofing, extended measuring ranges, photoelectrochemical detection and the probing of inaccessible places. This elegant approach can also provide a simple and cost-effective way to fabricate biomed-ical devices with extended functionality, such as medical optical probes with added electrochemical capabilities, optogenetics combined with local electrochemical detection, among others.

The Yellow-legged Hornet (Vespa velutina nigrithorax) (YLH) is an invasive insect that arrived in Europe in 2004 and is now spread across nine countries. It is a threat to the native entomofauna and harmful to beekeeping and agriculture, as it is a ravenous predator of the European Honey Bee (Apis mellifera) and other pollinating species. Its expansion has been unstoppable and all resources are needed to fight against it, including native vertebrate predators. Among these, the European Bee-eater (Merops apiaster) (EBE) is a potential one, but little is known about its predation on YLH. In a study carried out in Portugal, remains of YHL were detected in EBE nesting sites, which to the best of our knowledge is the first such report. This means that this bird could be one more agent in the biological control of this pest (although research on predation intensity is still needed), in conjunction with other natural predators and other strategies. In the Iberian Peninsula both species are allopatric in vast regions, so the role of EBE may be more limited. However, in the rest of Europe, at a country or continent scale, the scenario may be different and sympatry may occur to a greater extent.

The city of Lisbon, has any other capital of a European country, has a large number of issues while managing the waste and recycling containers spread throughout the city. This document presents the results of a study promoted by the Lisbon City Council for trialing LPWAN technology on the waste management vertical under the Lisbon Smart City initiative. Current waste management is done using GSM sensors, and the aim is to use LPWAN to reduce the costs, improve range and reduce provisioning times when changing the communications provider. After an initial study, LoRa was selected as the LPWAN of choice for the trials. The study is composed of multiple use cases at different distances, types of recycling waste containers, placements (underground and surface) and different kinds of waste level measurement LoRa sensors, deployed in order to assess the impact of the different use cases on the LoRa sensor usage. The results shown that the underground waste containers present the most difficult challenge, where the container itself imposes attenuation levels of 26dB on the link budget. The results promoted the deployment of a city wide LoRa network available to all departments inside the Lisbon City Council, and considering the network capacity the network, the network is also available to citizens to be used freely.

The prospect of drinking water serving as a conduit for gut bacteria, artificially selected by disinfection strategies and lack of monitoring at the point of use, is concerning. Certain opportunistic pathogens, notably some nontuberculous mycobacteria (NTM), often exceed coliform bacteria levels in drinking water, posing safety risks. NTM and other microbiota resist chlorination and thrive in plumbing systems. When inhaled, opportunistic NTM can infect the lungs of immunocompromised or chronically ill patients, and the elderly, primarily postmenopausal women. When ingested with drinking water, NTM often survive stomach acidity, reach the intestines, migrate to other organs using immune cells as vehicles, potentially colonizing tumor tissue, including in breast cancer. The link between the microbiome and cancer is not new, yet the recognition of intratumoral microbiomes is a recent development. Breast cancer risk rises with age, and NTM infections emerged as a concern among breast cancer patients. In addition to studies hinting at a potential association between chronic NTM infections and lung cancer, NTM have also been detected in breast tumors at levels higher than normal adjacent tissue. Evaluating the risks of continued ingestion of contaminated drinking water is paramount, especially given the ability of various bacteria to migrate from the gut to breast tissue via entero-mammary pathways. This underscores a pressing need to revise water safety monitoring guidelines and delve into hormonal factors, which includes addressing the disproportionate impact of NTM infections and breast cancer on women and examining the potential health risks posed by the cryptic and unchecked microbiota from drinking water.

Increasing environmental distress is associated with a growing asthma incidence and, with no treatments available, montelukast (MTK) – an antagonist of the cysteinyl leukotrienes receptor 1 – is widely used in the management of symptoms among adults and children. Recently, new molecular targets have been identified and MTK has been proposed for repurposing in other therapeutic applications, with several ongoing clinical trials. The proposed applications include neuroinflammation control, which could be explored in some neurodegenerative disorders, such as Alzheimer’s and Parkinson’s diseases (AD and PD). However, this drug has been associated with an increasing number of reported neuropsychiatric adverse drug reactions. Besides, and despite being on the market since 1998, MTK metabolism is still poorly understood and the mechanisms underlying neuropsychiatric ADRs remain unknown. We review the role of MTK as modulator of leukotriene pathways and systematize the knowledge about MTK metabolism. Known toxic effects of MTK are discussed, and repurposing applications are presented comprehensively, with a focus on AD and PD.

Advanced composite materials have drawn significant interest in the last years as an alternative to traditional materials due to their higher performance. However, industry struggle to provide low-cost, higher occupational safety, lower footprint with composites, making them suitable for holistic analyses. Therefore, the material design becomes an essential element that can impact the competitiveness, particularly in terms of productivity, circularity, safety, sustainability, and quality of the value chain. The Material Design-for-eXcellence is a state-of-art methodology for material performance multi-dimensional assessment along its life cycle phases, either useful to support ma-terial selection for new products or also to new material design support optimizing resource effi-ciency. In this methodology, the material behaviour and its multiple characteristics assessment, and the manufacturing processes efficiency are evaluated. The framework considers the analogy of product design holistic approaches, as Lean Design-for-X, to organize and assess the mul-ti-dimensional performance for each “X” Material Property. In this work, it was possible to observe that the bio-based composites solutions could be a good sustainable alternative for several sectors. Every day researchers are creating more new materials, having a diversity of properties at different scales, Material Design-for-eXcellence must also in the near future consider other factors. Hence, additional studies are thus foreseen to explore and develop this new tool.

Titanium dioxide (TiO2) thin films have been widely used in transparent optoelectronic devices owing to their excellent optical properties also is used in photocatalysis, cosmetics, and many other biomedical applications. However, a lack of studies was published on microstructure and adherence comparison of the TiO2 deposited on both AISI substrates. In this work, TiO2 thin films were deposited onto AISI 304 and AISI 316L stainless steel (SS) substrates via atomic layer deposition. Its heterostructure, morphology, and adhesion were compared in both substrates looking for synergistic and multifunctional properties. Raman spectroscopy mapping and X-ray diffraction using the Rietveld refinement method showed that the films are composed of anatase and rutile phases in different percentages. Scratching tests were used to analyze the film adher-ence and friction between a diamond tip and TiO2 film, showing well adhered in both substrates.

Artificial Intelligence (AI) is an automation mechanism that runs in a computer system performing tasks that normally require human intelligence, such as visual perception, speech recognition, decision making or translation [1]. Some authors argue that recent developments in AI are leading to a wave of innovation in organizational design and changes to institutionalized norms of the workplace [2]. Techno-optimists even named this present phase the ‘second machine age’, arguing that it now involves the substitution of the human brain (Brynjolfsson and McAfee 2014). Potentially, the ability to apply AI in a generalized way can produce significant technical, economic and social effects in firms. But how many of these AI applications are ready and how far can they be from reaching the manufacturing industry market? The paper will answer the question: what are the implications on industrial productivity and employment in the automotive sector with the recent automation trends in Portugal? We will focus on AI as the most relevant emergent technology to understand the development of automation in areas related to robotics, software, and data communications in Europe (Moniz 2018). R&D investments in industrial processes in general may reflect productivity improvements derived from the increased automation process. Our results will be based on case studies from the automotive and components sector combined with database search by keywords that signal intelligence automation developments and AI applications selected from national R&D projects (on robotics, machine learning, collaborative tools, human-machine interaction, autonomous systems, etc) supported by European structural funds. The implications on industrial productivity and employment will be discussed in relation to automation trends in the automotive sector.

With the recent advances in science and technology, more processing capability and data have become available, allowing a more straightforward implementation of data analysis techniques. Fortunately, the available online data storage capacity follows this trend, and vast amounts of data can be stored online freely or at accessible costs. As happens with every evolution (or revolution) in any science field, organizing and sharing this data is essential to contribute to new studies or validate the obtained results quickly. To facilitate this, we must guarantee interoperability between the existing datasets and the developed software, whether commercial or open source. This article explores this issue, analyzing the current initiatives to establish data standards and comparing some of the existing dataset online storage platforms. Through a Strengths, Weaknesses, Opportunities, and Threats (SWOT) analysis, it is possible to understand better the strategy that should be taken to improve the efficiency in this field, which directly depends on the data characteristics.

It is known for decades that viruses from the Coronoviridae family can adapt to human-to-human transmission. In 2020, SARS-CoV-2 caused a global pandemic of unprecedented scale imposing the loss of millions of human lives and being at the heart of a global economic crisis. Thus, we overviewed key research advances generated from the identification of the etiological agent to a better understanding of its origin, evolution and factors underlying global spread. Furthermore, we analyze the scientific productivity using the PubMed database. We found that the total number of publications increased more than 8% in 2020 when compared with 2019 or the average publications per year in the previous quinquennial. Remarkably, 86,638 publications related with COVID-19 and SARS-CoV-2 were published in 2020. Furthermore, there was also an increase in 2020 of publications in other major infectious diseases, such as AIDS, tuberculosis, or malaria. This success is likely the result from the vigorous, international, collaborative, and multidisciplinary response by the research community. During 2020 it was demonstrated, that with adequate support, it is possible to boost the rate of scientific progress in infectious diseases. Sustained investment in science will be key to address existing and future pandemics as the human population increases.

This paper presents a review on numerical and experimental methods to predict fracture of ad-vanced high strength steels (AHSS). AHSS are widely processed through sheet metal forming processes. Although being an excellent choice when lightweight, high strength and ductility are critical factors, their multi-phase microstructure accentuates forming challenges. To accurately model forming behavior, necking based failure criteria as well as direct fracture models require improvements. As a necking based failure model, the conventional forming limit diagram/curve (FLD/FLC) presents limitations such as in estimating direct fracture (surface cracks, edge cracks, shear cracks), as well as deformation histories under nonlinear strain paths. Thus, significant re-search efforts are being made towards the needs of advanced fracture constitutive models capa-ble of predicting fracture scenarios without necking, more frequently observed in the realm of AHSS. Scientific community research is divided into several directions aiming at improving the forming and fracture behavior accuracy of parts subjected to sheet metal forming operations. In this review paper, a comprehensive overview on ductile fracture modeling is presented. Firstly, the FLD/FLC limitations modeling fracture behavior in sheet metal forming operations are stud-ied. Followed by the recent trends in constitutive material modeling. Afterwards, material char-acterization methods advancements to cover a broad range of stress states are comprised. Final-ly, damage and fracture models predicting failure in AHSS are investigated. This review paper supplies relevant information on the current issues the sheet metal forming community is chal-lenged with due to the trend towards AHSS employment in the automotive industry.

Sensors available on mobile devices allow the automatic identification of Activities of Daily Living (ADL). This paper describes an approach for the creation of a framework for the identification of ADL, taking in account several concepts, including data acquisition, data processing, data fusion, pattern recognition, and machine learning. These concepts can be mapped in a module of the framework, including the use and creation of several algorithms. For the development of a framework that works in several conditions, e.g., without Internet connection, these algorithms should take in account the hardware and software limitations of the mobile devices to run all main tasks locally. The main purpose of this paper is related to the presentation the sensors, algorithms, and architecture of the proposed approach.

Maritime ports represent an important ecosystem for pollutant emissions and, taking into account the ongoing energy transition, need to adopt new solutions to mitigate current emission levels. These emissions are partially avoidable if ships and vessels docked at the port use electric energy to feed their internal power needs instead of using their internal combustion engines. In Europe, there is an ongoing discussion on including such emissions in the European Emissions Trading System which will represent added costs for maritime operators. Onshore Power Supply systems can contribute to the ongoing energy transition by allowing the use of electric power to feed docked ships. As a first step to contribute to the development of Onshore Power Supply solutions, it is necessary to evaluate the added power needs that these systems would represent for the port. This paper presents a methodology that allows port operators to verify, straightforwardly and transparently, their power needs for Onshore Power Supply applications. The methodology is based on the historical data of docked ships at the port or quay level and provides an energy analysis of each type of vessel to determine the power to be installed at the port so that it is possible to supply energy to different types of ships and vessels simultaneously. Additionally, the implemented methodology provides economic and technical decision support factors by comparing the fuel costs with electric power costs, assessing the potential for this transition to Onshore Power Supply. The methodology is validated using a real case study for the port of Lisbon and obtained results demonstrate the potential for the installation of Onshore Power Supply in medium to large-dimension maritime ports.

The application of machine learning techniques to satellite imagery has been the subject of interest in recent years. The increase in quality and quantity of images, made available by Earth observation programs, such as the Copernicus program, led to the generation of large amounts of data. Among the various applications of this data is the creation of land cover maps. The present work aimed to create machine learning models capable of accurately segment and classify satellite images, to automatically generate a land cover map of the Portuguese territory. Several experiments were carried out with the spectral bands of the Sentinel-2 satellite, with vegetation indices, and with several sets of land cover classes. Three machine learning architectures were evaluated, which adopt two different techniques for image classification. One of the classification techniques follows an object-oriented approach, and in this case the architecture adopted in our models was a U-Net artificial neural network. The other classification technique is pixel-oriented, and the machine learning models tested were random forest and support vector machine. The overall accuracy of the results obtained ranged from 68.6% to 94.75%, depending strongly on the number of classes into which the land cover is classified. The result of 94.75% was obtained when classifying the land cover only into 5 classes. However, a very interesting accuracy of 92.37% was achieved by the model when trained to classify 8 classes. These results are superior to those reported in the related bibliography.

The Brazilian economy, the rural in particular, was until the end of the 19th century based on slave labour. In this research, it was intended to obtain, through a review of historical descriptive studies, a detailed picture of the occupational hygiene conditions related to the slaves’ work and their interactions with climatic and environmental conditions. The search was done in the following databases: Science Direct, Scopus, Web of Science, Criminal Justice, Ebsco, Business Source Supplement, as well as original historical documents. Descriptive studies, without the restriction of language, were selected that involved the rural work of slaves in colonial and imperial Brazil. Working environmental conditions have been evaluated: environmental and occupational hygiene conditions to which the captive workers were exposed, as well as their accommodation and clothing. The analysed studies registered the existence of accommodation and similar dresses all over Brazil, regardless of the region's climate. In addition to these accommodation conditions, slaves were still exposed in a similar way to physical, chemical and biological agents throughout the country. Finally, it was also possible to identify a clear similarity with the occupational exposure conditions of the modern slaves in the 21^st century.

With the latest advances in information and communication technologies, greater amounts of sensitive user and corporate information are constantly shared across the network making it susceptible to an attack that can compromise data confidentiality, integrity and availability. Intrusion Detection Systems (IDS) are important security mechanisms that can perform a timely detection of malicious events through the inspection of network traffic or host-based logs. Throughout the years, many machine learning techniques have proven to be successful at conducting anomaly detection but only a few considered the sequential nature of data. This work proposes a sequential approach and evaluates the performance of a Random Forest (RF), a Multi-Layer Perceptron (MLP) and a Long-Short Term Memory (LSTM) on the CIDDS-001 dataset. The resulting performance measures of this particular approach are compared with the ones obtained from a more traditional one, that only considers individual flow information, in order to determine which methodology best suits the concerned scenario. The experimental outcomes lead to believe that anomaly detection can be better addressed from a sequential perspective and that the LSTM is a very reliable model for acquiring sequential patterns in network traffic data, achieving an accuracy of 99.94% and a f1-score of 91.66%.

The objective of this work is to analyze publications on the Balanced Scorecard (BSC), since 1956 (in the last sixty-five years), identifying evolution trends. Based on bibliometric techniques, the study was carried out based on data available in the Web of Science database through a systematic literature review. Web of Science is one of the main databases in the world, indexing the most cited journals in different areas of research and thus providing a set of data, essential for systematic analyses, including areas of study, list of journals, year of publication, citations from articles, among other relevant information. Because the chosen database is very complete, multidisciplinary and access to the use of Vosviewer software, which we used in this study, is acceptable.From the systematic search, 694 articles published until December 2021 were identified. The analysis of these publications indicates a growing trend in the publication of articles on BSC, highlighting partnership publications as well as their dispersion across journals from different areas.Most are qualitative studies (namely case studies) and questionnaires, as the main method of data collection. The main themes studied, we found that there are several articles on the application or integration of the BSC as a management model and that the studies are essentially concentrated on large companies belonging to the private sector, to the detriment of small and medium-sized companies and public and non-profit organizations profitable.

Although research has long established that the interaction with the natural environment is associated with better overall health and well-being outcomes, the Western model mainly focuses on treating the symptoms. In Aotearoa-New Zealand, the Indigenous Māori have long demonstrated significantly more negative health outcomes than non-Māori. Little research has examined the causes compared to Western populations or the role of the natural environment in health outcomes for Māori. An exploration of rongoā Māori (traditional healing system) was conducted to ascertain the importance of landscape in the process of healing. Eight rongoā healers or practitioners took part in semi-structured narrative interviews from June to November 2020. Transcribed interviews were analysed using an interpretative phenomenological analysis and Kaupapa Māori techniques. The findings show how rongoā is underpinned by a complex set of cultural values and beliefs, drawing from the connection to wairua (spirit), tinana (body), tikanga and whakaora (customs and healing), rākau (plants), whenua (landscape) and whānau (family). Incorporating such constructs into the landscape can foster our understanding of health and well-being and its implications for conceptualising therapeutic environments and a culturally appropriate model of care for Māori and non-Māori communities.

Institutional sustainability is a dynamic and multifaceted concept that relies on the contributions of various institutions, including the legal and the scientific system. On the other side, consumers boycotts are an expression of political consumerism by which consumers can use their market power to attain sustainability objectives. This article explores institutional trust on the legal system and trust on scientists as potential drivers for consumers’ boycotts. Using data retrieved from the European Social Survey covering twenty-five countries, the study employs binary logistic regression to assess the importance of institutional trust and other potential drivers of product boycotts in Europe. Results confirm that boycotting behaviour is affected by institutional trust, as well as other individual variables including gender, age and life-cycle effects, education, interest in politics and level of satisfaction with the political system, generalized trust, personal well-being, and consumers’ use and perceptions of information and communication technologies. The results of this study enrich the literature on consumer boycotts and have implications for policymakers involved in sustainability initiatives.

LoRa and its upper layers definition LoRaWAN is one of the most promising LPWAN technologies for implementing the Internet of Things (IoT). Although being a popular technology, several works in the literature have revealed various weaknesses regarding the security of LoRaWAN v1.0 (the official 1st draft). By using all these recommendations from the academia and industry, the LoRa-Alliance has worked on the v1.0 to develop an enhanced version and provide more secure and trustable architecture. The result of these efforts ended-up with LoRaWAN v1.1, which was released on Oct 11, 2017. This manuscript aims at demystifying the security aspects and provide a comprehensive Security Risk Analysis related to latest version of LoRaWAN. Besides, it provides several remedies to the recognized vulnerabilities. To the best of authors’ knowledge, this work is one of its first kind by providing a detailed security analysis related to latest version of LoRaWAN. According to our analysis, end-device physical capture, rogue gateway and replay attacks are found to be threating for safety operation of the network. Eventually, v1.1 of LoRaWAN is found to be less vulnerable to attacks compared to v1.0, yet possesses several security implications that need to be addressed and fixed for the upcoming releases.

This study investigates the relationship between clean and dirty energy markets, specifically focusing on clean energy stock indexes and their potential as hedging assets and safe havens during periods of global economic uncertainty. The research analyzes five clean energy indexes and five dirty energy indexes from May 2018 to May 2023, considering events like the global pandemic and the Russian invasion of Ukraine. The main objective is to examine the causal relationship among different stock indexes pertaining to dirty and clean energy by using the Granger causality test (VAR Granger Causality/Block Exogeneity Wald Test) to determine whether clean energy indexes can predict future prices of dirty energy indexes. However, the findings reveal that clean and dirty energy indexes do not exhibit hedging characteristics or serve as safe havens during times of economic uncertainty, rejecting the research question. These results have important implications for investment strategies, as assets lacking safe haven characteristics may not preserve portfolio efficiency in uncertain times. The study's insights provide valuable guidance for investors, poli-cymakers, and participants in energy financial markets. It highlights the need to adapt investment approaches and seek alternative options to navigate uncertain economic conditions effectively.

Cork oak mortality has reached alarming proportions in the last decades, exacerbated by climate change. Understanding this phenomenon is crucial in finding mitigation or adaptation strategies. This study conducts a diachronic analysis of cork oak mortality over 10 years using GIS tools, focusing on Portugal's Tagus Lezíria region. Topographic, edaphic and climatic variables were employed to create maps of edaphoclimatic aptitude for cork oaks. Dead trees were identified using remote sensing techniques and crown coverage was determined to calculate the mortality index. The diachronic analysis aimed to explore climate change effects on cork oak mortality. A decrease in precipitation was observed, significantly impacting stands with canopy cover below 40%. Furthermore, a negative effect of solar radiation identified only in stands with canopy cover of 40% suggested its role in cork oak decline. This study introduces a novel perspective, highlighting the protective effect of denser canopy cover (above 40%) against excessive solar radiation and the impact of reduced precipitation. The integrated and diachronic approach provides valuable information for adapting management strategies to climate change challenges.

The increasing social pressure for decarbonization has placed businesses under considerable scrutiny to actively reduce carbon emissions. A critical step towards achieving this objective is to shift conventional production and consumption systems to more sustainable alternatives. Thus, there is the emergent need to understand the patterns and drivers of the transformative business models (BMs) that underpin that shift. This study adopts a mixed-methods approach that integrates different literature streams--including Sustainability Transitions Theory (STT), Strategic Niche Management (SNM), and the Business Models approach--and stakeholders’ interviews to investigate the key elements of business models that lead towards sustainable practices. This research examines the organizational arrangements of European start-ups operating between 2014 and 2020. The transformation towards decarbonized production and consumption is characterized by efficient combination of business strategies that incorporate advanced technologies (ATs), such as artificial intelligence (AI), machine learning (ML) and its algorithms, along with sustainable elements, resulting in transformative business models. By exploring the driving elements behind the transition to low-carbon approaches, this study fills a significant gap in the existing literature on business models. The findings from this research also hold relevance for policymakers to promote decarbonization.

TomoSim comes as part of project ATMOS, a miniaturised DOAS tomographic atmospheric evaluation device, designed to fit a small drone. During the development of the project, it became necessary to write a simulation tool for system validation. TomoSim is the answer to this problem. The software has two main goals: to mathematically validate the tomographic acquisition method; and to allow some adjustments to the system before reaching final product stages. This measurement strategy was based on a drone performing a sequential trajectory and gathering projections arranged in fan beams, before using some classical tomographic methods to reconstruct a spectral image. The team tested three different reconstruction algorithms, all of which were able to produce an image, validating the team’s initial assumptions regarding the trajectory and acquisition strategy. All algorithms were assessed on their computational performance and their ability for reconstructing spectral "images", using two phantoms, one of which custom made for this purpose. In the end, the team was also able to uncover certain limitations of the TomoSim approach that should be addressed before the final stages of the system.

In this research paper we describe the development phase of a low-cost LoRa IoT solution applied to a kindergarten school with three years results. A set of sensors solution was developed in a LoRa communication board, battery powered, providing a simplified setup process. These sensors were used in order to measure temperature, humidity, luminosity, air quality and presence. Also, energy monitor solutions were integrated. The acquired data is transmitted and analysed for knowledge extraction, identifying savings and other related KPIs. From data, automatic saving actions were performed towards heating and cooling systems, lighting and a set of if-then actions were developed for automatic cost-saving actions, based on infrared signals to heating/cooling systems using some procedure of external command devices. This approach avoids the usage of proprietary vendor solutions in a flexible approach that can easily be deployed to any building facility. This is an important achievement since most of the building consumption is based on heating and cooling systems. In a three years test of the solution, the total energy consumption savings surpassed 20%

Obesity is one of the most prevalent and damaging metabolic conditions and is a risk factor for the development of other disorders that define the metabolic syndrome. Recent studies have identified a significant role of AGE accumulation and RAGE signaling pathways in the underlying mechanisms that cause the chronic inflammatory response present in obesity which, ultimately, leads to adipose tissue dysfunction. Given the current interest and increasing evidence on possible therapeutic opportunities in the AGE-RAGE axis, the purpose of this work is to review the key findings on new small molecules and bioactive compounds that act as AGE or RAGE inhibitors and their effects on metabolic parameters of people with obesity. The search queries were defined according to the following PICO question: “What are the effects of AGE-RAGE antagonism on adipose tissue metabolism and other metabolic parameters of people with obesity? “. Article search was performed in three online databases: PubMed, Scopus, and Web of Science. In the end, 20 studies were selected for this review. Overall, the reviewed molecules showed beneficial effects on body weight, glucose tolerance, insulin resistance, inflammatory profile, and adipose tissue metabolism in mice models with obesity. There are still very few studies on human application of these molecules, but the ones that were reviewed revealed controversial data when compared to animal studies. Therefore, further human clinical trials should be performed to retrieve more conclusive data.

Smart grids represent the evolution of traditional electrical grids through the integration of digital and communication technologies. These grids are capable of monitoring and managing the distribution of electricity efficiently and resiliently. Artificial Intelligence (AI) plays a crucial role in this context, offering advanced solutions for optimization, forecasting, and energy management. This paper explores the main AI technologies applied to smart grids, highlighting their advantages, challenges, and impacts on energy efficiency and sustainability. The methodology employed includes a comprehensive literature review, analysis of current AI applications in smart grids, and examination of case studies to illustrate the practical implementation and benefits of AI technologies in this field.

This study analyzes the convergence between artificial intelligence (AI) and management accounting in hospital contexts. Management accounting plays a central role in the effectiveness of planning, control and decision-making in healthcare institutions such as hospitals. The application of AI in this scenario offers powerful tools to improve accounting processes, optimize operational efficiency and maximize the use of available resources, resulting in an improvement in the quality of care provided to patients. Through in-depth analysis, the article explores how AI is bringing about a revolution in hospital management accounting, presenting case studies illustrating its successful implementation, outlining the tangible benefits.

The increased demand and use of autonomous vehicles and advanced driver-assistance systems has been constrained by an incidence of accidents involving errors with the perception layer’s functionality. In tandem, recent papers have noted the lack of standardized, independent testing formats and insufficient methods with which to analyze, verify and qualify LiDAR-based data and categorization. While camera-based approaches benefit from an ample amount of research, camera images can be unreliable in situations with impaired visibility such as dim lighting and fog. This paper aims to introduce a novel method based entirely on LiDAR data with the capability to detect anomalous patterns as well as complementing other performance evaluators using a Copula-based approach. With a promising set of preliminary results, this methodology may be used to evaluate an algorithm’s confidence score, the impact conditions may have on LiDAR data and detect cases in which LiDAR data may be insufficient or otherwise unusable.

Agricultural production needs technologies that assist the management of natural resources, for example, the collection of real-time data on soil, water, weather, crops, and biodiversity conditions. Sensor technology solutions and open-source software are appropriate for promoting more sustainable agricultural production. Among the advantages of using open-source technologies and software is its potential for extension, collaboration, customization, flexibility, maintenance cost, transparency, speed, and better security. Given the above, the objective of this research was to find, in different electronic databases, exclusively open-source software for precision agriculture, offering a systematic review, and addressing considerations and challenges. This survey considers up-to-date open-source software available in repositories such as GitHub and GitLab, to understand its characteristics and application formats.

Stainless steel 316L (SS316L) and titanium-alloy Ti6AL4V exhibit properties for bio-medical applications; however their tribocorrosion associated with metallosis is still a major concern. Therefore smoothing DLC coatings aiming for the improvement of tri-bocorrosion and cell viability of stainless steel 316L (SS316L) and titanium-alloy Ti6AL4V with and without DLC coatings were compared. The motivation was due to many papers detailing metallosis caused by metal debris in the body's soft tissues. Nowadays, metallosis is responsible for almost of prosthesis replacement surgeries. DLC coatings were produced using the Plasma Enhanced Chemical Vapor Deposition (PECVD) technique; acetylene gas was used as a carbon precursor, and silane gas produced an amorphous silicon interface between the DLC coating and metal substrate. A combined setup of techniques thoroughly evaluated the coatings considering chemical composition, coatings adhesion at a metallic substrate, scratch resistance, and tribocorrosion susceptibility. The cytotoxicity and genotoxicity of metallic samples with and without DLC coatings were analyzed, considering cell viability and its correlation with coatings’ chemical composition

South America has become the new epicenter of the coronavirus, especially in Brazil where the disease continues to spread exponentially across the country. This text aims to analyze the psychosocial factors of Covid-19 on back to school strategies in Brazil from a bioecological perspective. At the microsystem level, the population is experiencing different levels of stress and fear; at the mesosystem level, changes in routines, separation from family and friends, and closure of schools; and at the macrosystem level, national guidelines to control the pandemic, institutional standards on a national and international scale. Therefore, the main focus for the success of school return must be in the prevention of contagion and with physical and psychological health, and should not only consider the demands of curricula, financial or administrative management. For this reason, it is paramount that greater female representativeness is increased in decision-making levels of the meso and macrosystem, regarding the resumption of school and academic activities in the pandemic period, since the number of female leaders in decision-making, is still insufficient.

This study analyzes the convergence between artificial intelligence (AI) and management accounting in hospital contexts. Management accounting plays a central role in the effectiveness of planning, control and decision-making in healthcare institutions such as hospitals. The application of AI in this scenario offers powerful tools to improve accounting processes, optimize operational efficiency and maximize the use of available resources, resulting in an improvement in the quality of care provided to patients. Through in-depth analysis, the article explores how AI is bringing about a revolution in hospital management accounting, presenting case studies illustrating its successful implementation, outlining the tangible benefits.

The basis of this project is a health literacy cohort study (LISA) being developed in the county of Leiria. The study aims to reach and monitor the adult population of the county over time. Counting with a multidisciplinary team, the study stakeholders asked the designers to develop the study’s brand so it could be more advertisable to the population, turning the communication between the stakeholders and the public easier. The development of the brand identity and elements of communication used some graphic design approaches. These approaches were reinforced by the opinions given by the interviewed sample of the population, that answered some of the study’s questions. The interviews held by designers allowed the team to receive information about what was expected the study to be, and how and where to better communicate the LISA’s Study. Trough the aforementioned process resulted in the current finalized outcomes of the study’s brand and communication materials. Both printable and digital communication elements (i.e., roll-up, id cards, flyers, QR Code, and website) were developed and disseminated according to the brand's strategy. Concluding, the communication elements created are seen as the first phase of this project, leaving a second phase related to the design and structuration of the Study to be developed, and published in future articles.

Green investors have expressed concerns about the environment and sustainability due to the high energy consumption involved in cryptocurrency mining and transactions. This article investigates the safe haven characteristics of clean energy stock indexes in relation to 3 cryptocurrencies, taking into account their respective levels of "dirty" energy consumption from May 16, 2018, to May 15, 2023. By virtue of analyzing a tumultuous era in the global economy, the level of integration between clean energy stock indexes and cryptocurrencies will be inferred by using Gregory and Hansen's methodology. Furthermore, to assess the presence of a volatility spillover effect between clean energy stock indexes and “dirty-classified” cryptocurrencies, the ?-test of heteroscedasticity of two samples from Forbes and Rigobon will be employed. The empirical findings show that clean energy stock indexes may offer a viable safe haven for dirty energy cryptocurrencies. However, the precise associations differ depending on the cryptocurrency under examination. The implications of the study's results are significant for investment strategies, this knowledge can inform decision-making procedures and facilitate the adoption of sustainable investment practices. Investors and policymakers can gain a deeper understanding of the interplay between investments in renewable energy and the cryptocurrency market.

Low Power Wide Area Networks (LPWAN) enable a growing number of Internet-of-Things (IoT) applications with large geographical coverage, low bit-rate, and long lifetime requirements. LoRa (Long Range) is a well-known LPWAN technology that uses a proprietary Chirp Spread Spectrum (CSS) physical layer, while the upper layers are defined by an open standard - LoRaWAN. In this paper, we propose a simple yet effective method to improve the Quality-of-Service (QoS) of LoRa networks by fine-tuning specific radio parameters. Through a Mixed Integer Linear Programming (MILP) problem formulation, we find optimal settings for the Spreading Factor (SF) and Carrier Frequency (CF) radio parameters, considering the network traffic specifications as a whole, to improve the Data Extraction Rate (DER) and to reduce the packet collision rate and the energy consumption in LoRa networks. The effectiveness of the optimization procedure is demonstrated by simulations, using LoRaSim for different network scales. In relation to the traditional LoRa radio parameter assignment policies, our solution leads to an average increase of 6% in DER, and a number of collisions 13 times smaller. In comparison to networks with dynamic radio parameter assignment policies, there is an increase of 5%, 2.8%, and 2% of DER, and a number of collisions 11, 7.8 and 2.5 times smaller than equal-distribution, Tiurlikova's (SoTa), and random distribution, respectively. Regarding the network energy consumption metric, the proposed optimization obtained an average consumption similar to Tiurlikova's, and 2.8 times lower than the equal-distribution and random dynamic allocation policies. Furthermore, we approach the practical aspects of how to implement and integrate the optimization mechanism proposed in LoRa, guaranteeing backward compatibility with the standard protocol.

The construction industry, a vital sector of the global economy, is projected to grow significantly over the next 15 years. Despite its importance, this industry struggles with inefficiency, high costs, prolonged timelines, and substantial ecological impacts. These challenges have led governments to advocate for Building Information Modeling (BIM) to enhance Efficiency and sustainability through comprehensive digital representations of physical and functional characteristics. The effective integration of BIM technology hinges on the active participation of industry providers, raising the question of how these providers can positively contribute to improving BIM dimen-sions. This study investigates the potential of coopetition networks within the Portuguese Orna-mental Stone industries (OS-PT) to address this challenge. Coopetition networks, which blend competition and cooperation, foster collaborative networks among companies to enhance their re-sponse to digital supply chains. The research employs an Experimental Pilot Network facilitated by an Industrial Internet of Things (IIoT) artefact to assess the benefits of coopetition networks. The findings demonstrate that transitioning from current practices (CB.P) to coopetition network practices (CN.P) significantly improves operational Efficiency, labour productivity, and sustaina-bility. Specifically, the transition resulted in a 15.6% increase in on-time delivery performance, a 27.38% improvement in labour productivity, and a 21.8% reduction in CO₂ emissions per part produced. These improvements align with Sustainable Development Goals (SDGs) 8, 9, 11, and 13, highlighting the strategic value of coopetition in driving innovation and sustainability in the construction industry. Future research should explore the scalability of these findings across different sectors and further refine methodologies to maximize the benefits of coopetition net-works.

The efficient and sustainable management of hospitals is an increasingly relevant challenge in the healthcare sector. With limited financial resources, regulatory pressures and increasing demands for quality services, hospitals are faced with the want to approve sound policies to certify financial and operational sustainability. Management accounting is critical in this instance. In Portugal the DL nº 284, of July 26, 1999, allow us to confirm the need to reinforcement of profitability and efficiency in the provision of healthcare. Management accounting is an essential tool for monitoring and controlling costs, making strategic decisions, efficiently allocating resources and evaluating performance in the hospital environment. It allows a comprehensive view of financial and operational aspects, providing valuable information for management and strategic planning. However, the sustainability of hospital management accounting is a critical and complex topic that deserves special attention. Hospitals face several challenges, such as the complexity of hospital costs, the integration of information systems and the measurement of healthcare value. These challenges can compromise the effectiveness of management accounting and its ability to provide relevant and reliable information for decision making. As a result, it is required to address the sustainability of hospital management accounting by identifying the specific challenges faced in this area and exploring opportunities to overcome them. By addressing these challenges and seizing opportunities, hospitals can strengthen their position in the healthcare sector, improve their operational efficiency, optimize resource allocation and ensure the provision of quality services to patients. In this article, the challenges faced by hospital management accounting will be analysed, such as the complexity of costs, the integration of information systems and the measurement of value in healthcare. Additionally, opportunities to improve financial and operational management will be highlighted through the adoption of advanced technologies, an emphasis on value-based management and collaborative partnerships. By exploring these themes, this essay aims to make a contribution. to the advancement of hospital management accounting and the sustainability of hospitals in the current healthcare scenario.

The diagnosis and the pathology of Myalgic Encephalomyelitis/Chronic Fatigue Syndrome (ME/CFS) remain under debate. However, there is a growing body of evidence for an autoimmune component in ME/CFS caused by the Epstein-Barr virus (EBV) and other viral infections. In this work, we took advantage of a large public dataset on the IgG antibodies to 3,054 EBV peptides to understand whether these immune responses could be used as putative biomarkers for disease diagnosis and triggers of pathological autoimmunity in ME/CFS patients using healthy controls (HCs) as a comparator cohort. We then aimed at predicting disease status of study participants using a Super Learner algorithm targeting an accuracy of 85% when splitting data into train and test datasets. When we compared data of all ME/CFS patients or data of a subgroup of these patients with non-infectious or unknown disease trigger to the dataset of HC, we could not find an antibody-based classifier that would meet the desired accuracy in the test dataset. In contrast, we could identify a 26-antibody classifier that could distinguish ME/CFS patients with an infectious disease trigger from HCs with 100% and 90% accuracies on the train and test sets, respectively. We finally performed a bioinformatic analysis of the EBV peptides associated with these 26 antibodies. We found no correlation between the importance metric of the selected antibodies in the classifier and the maximal sequence homology between human proteins and each EBV peptide recognized by these antibodies. In conclusion, these 26 antibodies against EBV have an effective potential for disease diagnosis of a subset of patients, but they are less likely to trigger pathological autoimmune responses that could explain the pathogenesis of ME/CFS.

Polydimethylsiloxane (PDMS) is one of the most popular elastomers and has been used in different fields, especially in biomechanics research. Among the many interesting features of this material, its hyperelastic behaviour stands out, which allows the use of PDMS in various applications, like the ones that mimic soft tissues. However, the hyperelastic behaviour is not linear and needs detailed analysis, especially the characterization of shear strain. In this work, two approaches, numerical and experimental, were proposed to characterize the effect of shear strain on PDMS. The experimental method was implemented as a simple shear testing associated with 3D digital image correlation and was made using two specimens with two thicknesses of PDMS (2 and 4 mm). A finite element software was used to implement the numerical simulations, in which four different simulations using the Mooney-Rivlin, Yeoh, Gent, and Polynomial hyperelastic constitutive models were performed. These approaches showed that the maximum value of shear strain occurred in the central region of the PDMS, and higher values emerged for the 2 mm PDMS thickness. Qualitatively, in the central area of the specimen, the numerical and experimental results have similar behaviours and the values of shear strain are close. For higher values of displacement and thicknesses, the numerical simulation results move further away from experimental values.

With consumers increasingly aware of the effects of human activity on the environment, tourism products and destinations are increasingly marketed as sustainable and socially responsible. As most sustainable practices lead to additional costs, and tourists’ decisions tend to be price sensitive, achieving sustainability goals necessarily involves understanding how much tourists are willing to pay extra for sustainable practices, as well as the antecedents of such Willingness to Pay (WTP). The present study aims to advance knowledge on the antecedents of WTP for Sustainable Destinations (WTP-4-SD), for which it builds on previous studies employing the Theory of Planned Behavior (TPB) and the New Environmental Paradigm (NEP). In this context, a theoretical model involving Ecotourism Attitudes, Environmental Beliefs, Climate Change-Related Risk Perceptions (CC-RRP), Environmental Concern During trip (ECDT), and Sustainable Consumption Behavior (SCB) as antecedents of WTP-4-SD is proposed. The model was tested based on data collected through an online survey, form a sample of 1,545 Spanish and Portuguese tourists, and analyzed through Structural Equations Modelling (SEM). The findings suggest that a cohesive set of attitudes and beliefs regarding the man-nature relationship, the risks of climate change and the role of tourism – which have been labelled “No Planet-B Attitudes” – is the main driver of WTP-4-SD.

Product Development Process is widely known among industry and automobile companies. With the advance of technology and the need to improve product efficiency, many companies have been applying Lean Thinking principles. Their benefits lead those companies to implement their concepts and tools, like Value Stream Design in Indirect Areas, Obeya, Just-in-time (JIT) which is based on the production control system developed and implemented by Toyota. This article describes the case study of the implementation of Lean Product & Process Development (LPPD) on the current Product Development Process (PDP) in an automotive company. The PDP was created by the organization and adapted from Advanced Product Quality Planning (APQP). The main findings were a Value Stream Design model of an improved PDP as a useful and successfully contribution for the company. These improvements reduced the product development lead time from 700 days to 369 days. The process efficiency increased from 68% to 85%. The communication and transparency between the cross-functional team (CFT) was improved and show promise for achieving a successful launch of new products.

Soils provide important regulating ecosystem services and have crucial implications for human well-being and environmental conservation. However, soil degradation and particularly soil erosion jeopardize the maintenance and existence of these services. This study explores the spatio-temporal relationships of soil erosion to understand the distribution patterns of sediment retention services in mainland Portugal. Based on Corine Land Cover maps from 1990 to 2018, the InVEST Sediment Delivery Ratio (SDR) model was used to evaluate the influence of sediment dynamics for soil and water conservation. Spatial differences in the sediment retention levels were observed within the NUTS III boundaries, showing which areas are more vulnerable to soil erosion processes. Results indicated that the Region of Leiria, Douro and the coastal regions have decreased importantly sediment retention capacity over the years. However, in most of the territory (77.52%) changes in sediment retention were little or not important (i.e., less than 5%). The statistical validation of the model proved the consistency of the results, highlighting the usefulness of this methodology to analyse the state of soil erosion in the country. These findings can be relevant to support strategies for more efficient land use planning regarding soil erosion mitigation practices.

Objectives This article focuses on exploring the evolution of Palliative Care in Portugal. Ten years after the approval of its Basic Law, the aim was to investigate the quality of the path followed and the guidelines that could promote its development. Thus, this study sought to identify a) the goals of the current members of parliament concerning Palliative Care, b) the major priorities that should guide the development of Palliative Care in the coming decade, c) the facilitating or hindering factors to accelerating the process, and d) to propose consensually agreed measures for an integral development of Palliative Care within the health system. Methods Qualitative data analysis was performed from the reading of literature and interviews conducted via Zoom with several intentionally chosen participants, leading to the creation of a Focus Group. The NVivo® 10 was used for data processing and categorisation. Results Three key themes emerged concerning the current status of palliative care: the policymakers, the technicians, and the society. This first line of structuring is explained by a second set of categories, namely, a) knowledge about palliative care; b) Palliative care organisation from the policymakers’ perspective. In the technicians' domain: a) knowledge about palliative care, b) clinical training, and c) medical specialty. Finally, in society: a) knowledge about palliative care. Significance of the Results Advancing general education, increasing qualitative training for the different health professionals, reformulating laws supporting them, promoting flexibility of the implementation methodologies, and establishing medical specialty, are crucial to achieving the proposed goal.

Introduction: Within primary ARDS, SARS-CoV-2-associated ARDS (C-ARDS) emerged in late 2019, reaching its peak during the subsequent two years. Recent efforts in ARDS research have concentrated on phenotyping this heterogeneous syndrome to enhance comprehension of its pathophysiology. Methods and Results: A retrospective study was conducted on C-ARDS patients from April 2020 to February 2021, encompassing 110 participants with a mean age of 63.2±11.92 (26-83 years). Of these, 61.2% (68) were male, and 25% (17) experienced severe ARDS, resulting in a mortality rate of 47.3% (52). Ventilation settings, arterial blood gases, and chest X-ray (CXR) were evaluated on the first day of invasive mechanical ventilation and between days two and three. CXR images were scrutinized using a convolutional neural network (CNN). A binary logistic regression model for predicting C-ARDS mortality was developed based on the most influential variables: age, PaO2/FiO2 ratio (P/F) on days one and three, CNN-extracted CXR features, and age. Initial performance assessment on test data (23 patients out of the 110) revealed an area under the receiver operating characteristic (ROC) curve of 0.862 CI (0.654-0.969). Conclusion: Integrating data available in all intensive care units enables the prediction of C-ARDS mortality by utilizing evolving P/F ratios and CXR. This approach can assist in tailoring treatment plans and initiating early discussions to escalate care and extracorporeal life support. Machine learning algorithms for imaging classification can uncover otherwise inaccessible patterns, potentially evolving into another form of ARDS phenotyping. The combined features of these algorithms and clinical variables demonstrate superior performance compared to either element alone.

B chromosomes are supernumerary chromosomes which are found in addition to the normal standard chromosomes (A chromosomes). B chromosomes are well known to accumulate several types of repeats. Although the evolution of B chromosomes has been subject of numerous studies, the mechanisms of accumulation and evolution of repetitive sequences is not fully understood. Recently, new genomic approaches have shed light on the origin and accumulation of different classes of repetitive sequences in the process of B chromosome formation and evolution. Here we discuss the impact of repetitive sequences accumulation on the evolution of plant B chromosomes.

The main purpose of this article is to identify key areas of research on climate change in the context of the SDGs, focusing on the potential development impacts on Bolivia and Paraguay. Application of the Delphi technique with the involvement of a panel of experts allowed the consolidation of different perspectives and knowledge on climate change, focusing on those that experts considered to have the greatest potential impact on the regions. The results of this study constitute a valuable guide for decision-makers and funding bodies, highlighting research areas that could have a significant impact at the national and regional levels, as well as for researchers, identifying specific research areas crucial for regional development and climate change mitigation.

This paper makes a theoretical contribution by exploring the integration of sustainability principles into project management. It compares two recent methodologies, PM² and PRiSM^TM, and provides a practical contribution by advocating for the adoption of these sustainability-driven practices among practitioners. Sustainability remains relatively unknown in the realm of project management, and this research aims to bridge that gap. The study follows an interpretivist philosophy and employs a combination of interviews and archival data analysis. PM², created by the European Commission, provides a project management methodology free to organizations and includes best practices from other bodies of knowledge. However, it doesn't include sustainability, because it aims to be generic. PRiSM^TM, based on the P5™, aims to make the project management process more sustainable. PRiSM^TM has P5 Impact Analysis and Sustainability Management Plan as the main differentiating deliverables and is an extension of the Triple Bottom Line, also including product and process. The PM² Alliance CEO believes that PM² aims to be generic, so a focus on sustainability would remove the methodology's "elasticity". However, users wishing to use PM² and consider sustainability can include it in the additional objectives and use PRiSM^TM differentiating deliverables.

Enzymes are in high demand for very diverse biotechnological applications. However, natural biocatalysts often need to be engineered for fine-tuning their properties towards the end applications, such as the activity, selectivity, stability to temperature or co-solvents, and solubility. Computational methods are increasingly used in this task, providing predictions that narrow down the space of possible mutations significantly and can enormously reduce the experimental burden. Many computational tools are available as web-based platforms, making them accessible to non-expert users. These platforms are typically user-friendly, contain walk-throughs, and do not require deep expertise and installations. Here we describe some of the most recent outstanding web-tools for enzyme engineering and formulate future perspectives in this field.

Rapid developments in the field of underwater photogrammetry have given scientists1the ability to produce accurate 3-dimensional (3D) models which are now increasingly used in the representation and study of local areas of interest. This paper addresses the lack of systematic analysis of 3D reconstruction and navigation fusion strategies, as well as associated error evaluation of models produced at larger scales in GPS-denied environments using a monocular camera (often in deep-sea scenarios). Based on our prior work on automatic scale estimation of Structure from Motion (SfM)-based 3D models using laser scalers, an automatic scale accuracy framework is presented. The confidence level for each of the scale error estimates is independently assessed through the propagation of the uncertainties associated with image features and laser spot detections using a Monte Carlo simulation. The number of iterations used in the simulation was validated through the analysis of the final estimate behaviour. To facilitate the detection and uncertainty estimation of even greatly attenuated laser beams, an automatic laser spot detection method, mitigating the effects of scene texture, was developed, with the main novelty of estimating the uncertainties based on the recovered characteristic shapes of laser spots with radially decreasing1 intensities. The effects of four different reconstruction strategies resulting from the combinations of Incremental/GlobalSfM, and thea priori/a posterioriuse of navigation data were analyzed using two distinct survey scenarios captured during the SUBSAINTES 2017 cruise (doi: 10.17600/17001000). The study demonstrates that surveys with multiple overlaps of non-sequential images result in a nearly identical solution regardless of the strategy (SfM or navigation fusion), while surveys with weakly connected sequentially acquired images are prone to produce broad-scale deformation (doming effect) when navigation is not included in the optimization. Thus the scenarios with complex survey patterns substantially benefit from using multi-objective BA navigation fusion. In all cases, the errors in the models are inferior to 5%, with errors often being around 1%. The effects of combining data from multiple surveys were also evaluated. The introduction of additional vectors in the optimization of multi-survey problems successfully accounted for offset changes present in the underwater USBL-based navigation data and thus minimize the effect of contradicting navigation priors. Our results also illustrate the importance of collecting a multitude of evaluation data at different locations and moments during the survey.

This study investigates the relationship between energy metals and precious metals to assess their suitability as safe haven assets in clean energy investment portfolios. It focuses on the impact of events in 2020 and 2022, characterized by substantial investments in clean energy. The research reveals that, except for Nickel Futures (NICKELc1), energy metals are positively linked with clean energy indexes. This suggests that they can serve as a secure investment option for green investors looking to diversify their portfolios. As a result, the study dismisses the initial question, indicating that energy metals can indeed be considered safe havens within the context of clean energy investments. Additionally, the research reinforces prior findings that precious metals like gold, silver, and platinum possess safe haven characteristics in relation to specific clean energy stock indexes. These results have significant implications, particularly given the increasing investments in clean energy stocks and the recurring uncertainties in the market. In summary, this study supports the idea that both energy metals and precious metals can play valuable roles in clean energy portfolios, providing stability during turbulent times in the market.

The non-existence of a land ownership database in most of the developing countries moves the inhabitants to the occupation of public lands. Some of this situation are the origin to areas of informal housing, commerce and agriculture and in the end into new ​​informal settlements. Informal settlements become a serious problem in developing countries. The most common typology of informal settlements is that they are the population settled in public lands without any infrastructures and against the administrator's will. Thought this action the result in an uncontrolled land occupation process that promotes new informal areas without any proper built-up utilities, located in risk areas on the territory, barely ensuring the minimum requirements for a heaty living of the population and in various cases incentives to an informal economy. The process of build a cadastral map in informal settlement areas is a fundamental base to support the future transformation of illegal areas and to regulate the occupation of new subdivision planning and into the creation of new expansion areas. In this paper, it is presented a methodology developed to be applied to support a new register of land and to management. The transformation of informal settlement areas. The model to register the land tenure has been associated with allows the process application to multiple typology of informal settlements. The model to register land tenure has developed on a series of qualitative and quantitative data that determine the identification and classification of the buildings and its physical and functional description. The model was developed using Geographic Information System and with an initial survey of existing land titles of possession and public proposals to develop new expansion areas. A case study of the method is presented, where the land management model was implemented - Chã da Caldeiras in Ilha do Fogo an informal settlement in Cape Verde. The results are a great acceptance of the proposal by the population and local authorities and the starting of the implementation phase.

In the Northeast of Portugal, like in many parts of the world, most soils are acidic, which may hamper crop productivity. This study presents the findings of a factorial experiment involving three factors: i) soil type [schist (Sch) and granite (Gra)]; ii) cultivars [Cobrançosa (Cob) and Arbequina (Arb)]; and iii) fertilizer treatments [liming (CaCO3) plus Mg (LMg), P application (+P), B application (+B), all fertilizing materials combined (Con+), and an untreated control (Con-)]. Dry matter yield (DMY) did not show significant differences between cultivars, but plants grown in schist soil exhibited significantly higher biomass compared to those in granite soil. Among the treatments, +B and Con+ resulted in the highest DMY (50.8 and 47.2 g pot-1, respectively), followed by +P (34.3 g pot-1) and Con- (28.6 g pot-1). Treatment LMg yielded significantly lower values (15.6 g pot-1) than Con-. LMg raised the pH above 7 (7.36), leading to a severe B deficiency. Although Con+ also raised the pH above 7 (7.48), it ranked among the most productive treatments for providing B. Therefore, when applying lime to B-poor sandy soils, moderate rates are advised to avoid inducing a B deficiency. Additionally, it seems prudent to apply B after lime application.

Mannosylerythritol lipids (MELs), one of the most promising biosurfactants (BS), are glycolipids produced by yeasts or fungi, with great environmental performance and a high compatibility with the human body. MELs besides working as typical surfactants, can form diverse structures when in the critical aggregation concentration (CAC), reducing the surface tension of water and other solutions, and being stable over a wide range of conditions. Among others, MELs present anti-microbial, antitumor, antioxidant and anti-inflammatory activity, skin and hair repair capacity, which opens possibilities for their use in applications from cosmetics and pharmaceutics to bio-remediation and agriculture. However, their market share is still low when compared to other glycolipids, due to their less developed production process and higher production cost. This re-view gathers information on the potential applications of MELs mentioned on the literature since 1993. Furthermore, it is also explored the current strategies being developed to enhance the market presence of MELs, in parallel with the ones developed for rhamnolipids and sophorolipids.

Regional heterogeneity of microglia was first described a century ago by Pio del Rio Hortega. Currently, new hints on microglia heterogeneity across central nervous system (CNS) regions are still being unraveled by high-throughput techniques. It remains unclear whether these spatial specificities translate into different microglial behaviors in vitro. We cultured microglia isolated from the cortex and spinal cord and analyzed the effect of the CNS spatial source on in vitro behavior by applying the same experimental protocol and culture conditions. We analyzed microglial cell numbers, function, and morphology and found a distinctive in vitro phenotype. We found that microglia were present in higher numbers in spinal cord-derived glial cultures, presenting different expression of inflammatory genes and a lower phagocytosis rate under basal conditions or after activation with LPS and IFN-. Morphologically, cortical microglial cells are more complex and present longer ramifications, which were also observed in vivo in CX3CR1+/GFP transgenic reporter mice. Collectively, our data demonstrated that microglial behavior in vitro is defined according to specific spatial characteristics acquired in the tissue. Thus, our study highlights the importance of microglia as a source of CNS for in vitro studies.

This paper investigates the relationship between public spaces and quality of life (QoL) for older adults, aiming to identify knowledge gaps within the context of population ageing and urbanization. Recognizing the growing importance of sustainable urban development, the research explores how cities can foster active ageing and improve QoL through accessible and inclusive public spaces. A scoping literature review identifies five key QoL domains for older adults: autonomy, meaningful activities, positive social relationships, leisure opportunities, and health. The review highlights areas requiring further investigation, including the interplay between environmental design and social connections, intergenerational perspectives on public space liveliness, the influence of context on QoL and the built environment, and the value of qualitative research in this field. By contributing to the understanding of QoL in relation to public spaces through the lens of Person-Environment fit theory, this study aims to inform urban design, landscape architecture, and policymaking in the creation of age-friendly communities with inclusive public spaces.

Small and Medium Enterprises (SMEs) play a crucial role in the European economy, representing the vast majority of businesses and a significant portion of employment. As the global business environment increasingly embraces digital supply chains, coopetition—collaborative competition—has emerged as a vital strategy for sustaining business growth and competitiveness. Despite its recognized importance, the potential of coopetition to enhance firm performance, particularly within SMEs, remains underexplored. This study aims to address this gap by developing and validating a reference model for coopetition networks specifically tailored for SMEs, utilizing the Service-Dominant framework. The research introduces a comprehensive model that guides the formation, management, and dissolution of coopetition networks throughout their lifecycle. The model is empirically validated within the Portuguese ornamental stone sector, providing insights into its practical applicability. Key findings demonstrate that the implementation of coopetition networks can significantly enhance production efficiency and operational effectiveness within SMEs. The study also highlights the critical role of technology as an enabler of service exchange and institutionalization within coopetition networks, facilitating collaborative interactions and value co-creation. While the study makes substantial contributions to the literature, it also identifies areas for further research, including the exploration of human dynamics within coopetition networks and the long-term sustainability of such networks. The findings offer valuable guidance for SMEs seeking to enhance their competitiveness and operational efficiency in an increasingly digital and interconnected business landscape.

Petroselinum crispum (Mill.) Fuss (Apiaceae), popularly known as parsley, is a ubiquitous aromatic herb used for culinary and medicinal purposes worldwide. Besides the richness in nutrients, sev-eral bioactive secondary metabolites, especially the flavone apigenin and its glycosides, have been described in the species. Parsley has already been shown to have several health-promoting activi-ties, such as antithrombotic, antihypertensive, and hypolipidemic. The multiple studies conducted in animal models so far suggest the species is a potential source of cardioprotective agents. This review provides up to date information and perspectives on the potential of parsley and its bioac-tive compounds for the development of nutraceutical products and drugs for the promotion of cardiovascular health. It includes not only a discussion on reported bioactivities, but also the knowledge of supplements and food additives developed as innovative parsley-based products.

Interactions of soil moisture with plant root systems are very important for plant growth. For non-invasive determination of volumetric soil moisture in a rhizobox, a microwave system based on transmittance of electromagnetic waves in the microwave frequency range was developed using microstrip patch antennas. Vector Network Analyzers (VNAs) were used to measure the S-parameters at frequency ranges close to 5 GHz. A transmission system with microstrip patch antennas was developed. The result of this attenuation is in the frequency domain. The antennae were designed as resonant microstrip antennae. The antennae were placed on both sides of a rhizobox, which allowed non-invasive measuring soil moisture in the box. The attenuation (S21(dB)) was used to measure the effect of temperature, and different types of soil; as well as sensitivity, reproducibility and repeatability of the system. In this work we present quantitative results of soil moisture in rhizobox. The microwave technique, using microstrip patch antennas, is a reliable and accurate system, and showed very promising potential applications for rhizobox-based investigations of root performance.

Advanced Glycation End Products (AGEs) represent a set of substances that contribute directly to the triggering and/or aggravation of pathologies associated with ageing. AGEs are produced by the reaction between reducing sugars (or α-dicarbonyl compounds) proteins and amino acid residues. Current methodologies require an incubation period of 1-3 weeks to generate AGEs. In this study the reaction time for the formation of AGEs (48 and 3 hours) is significantly reduced by coupling and adapting procedures already existing in the literature to the free radical generation system called the hypoxanthine/xanthine oxidase assay. The capacity of different classes and chemical compounds (aminoguanidine, chlorogenic acid, rutin, extracts of Hancornia speciosa Gomes) were evaluated to inhibit the protein glycation process, acting as capturing agents of α-dicarbonyl species. Aminoguanidine, rutin and the leaf extracts of Hancornia speciosa Gomes show a high capacity to act as α-dicarbonyl compound scavengers (RCS-trapping) and resulting in the inhibition of AGEs formation.

Screening of pollen traits in diploid wild potatoes (Solanum sect. Petota, Solanaceae) is desirable to develop heat-tolerant potato (S. tuberosum) cultivars. To accomplish this goal requires exploring potato genetic resources that are conserved in genebanks. The goal of this study was to assess pollen viability and 2n pollen production of the diploid potato wild relatives under heat stress condition. We assessed pollen viability and size of nine potato accessions conserved at the Embrapa Potato Gene Bank, including eight wild potatoes S. chacoense (BRA 00167447-2, BRA 00167017-3, BRA 00167023-1, BRA 00167028-0), S. commersonii (BRA00167007-4, BRA00167420-9, BRA00183760-8), and S. malmeanum (BRA 00183755-8), along with a control accession from the cultivated species S. tuberosum (BRA 00167251-8). The plant accessions were cultivated in different growth chambers, subjected to both control temperature (ranging from 14 to 27°C) and supraoptimal temperature conditions (ranging from 24 to 34°C). At heat stress, the accessions BRA 00167251-8 did not bloom, and BRA 00167023-1 did not produce pollen. The remaining accessions did not exhibit a significant reduction in pollen viability as the temperature increased. Pollen viability at the control temperature had the lowest value in BRA-00167420-9 (S. commersonii) with 68.5% and the highest in BRA 00183755-8 (S. malmeanum) with 100%. At the supraoptimal temperature the lowest value was in BRA 00167420-9 (S. commersonii) with 54.5% and the highest in BRA 00167017-3 (S. chacoense) with 94%. The average of pollen diameter was 20 μm in all wild potato genotypes, and the increase of temperature did not lead to 2n pollen production. Estimated Genotypic Coefficient of Variation (GCV) was lower than Phenotypic Coefficient of Variation (PCV) for pollen viability. The observed heritability values ranged from 58.82% in BRA00167007-4 to 91.32% in BRA 00183755-8. Our results highlight the genetic variability available in wild potato germplasm concerning pollen viability under heat stress. Furthermore, these first insights offer valuable guidance for ongoing and future endeavors in diploid potato breeding.

Atopic dermatitis (AD) is a chronic eczematous inflammatory disease that may arise from environmental, genetic and immunological factors. Despite the efficacy of current treatment options like corticosteroids, such approaches are mainly focused on symptoms relief, and may present certain undesirable side effects. In recent years, investigation regarding isolated natural compounds, oils, mixtures and/or extracts, have gained scientific attention because of their high efficiency and moderate to low toxicity. Despite their promising therapeutic effects, the applicability of such natural health care solutions is somehow limited by their instability, poor solubility, and low bioavailability. Therefore, novel nanoformulation-based systems have been designed to overpass these limitations, thus enhancing the therapeutic potential, by promoting the capacity of these natural drugs to properly exert their action in AD-like skin lesions. For the best of our knowledge, this is the first literature review that focused on summarizing the last nanoformulation-based solutions loaded with natural ingredients, and specifically for the management of AD. We suggest that future studies should focus on robust clinical trials that may confirm the security and effectiveness of such natural-based nanosystems, thus paving the way for more reliable AD treatments.

Master Valentim’s fountain became an important historical patrimony for Brazil, being portrayed by famous artists among them Jean-Baptiste Debret. In 1938, it was registered as cultural heritage by the Brazilian National Historical and Artistic Heritage Institute (IPHAN), and in 1990 it was subjected to excavation and restoration works. The fountain was built in Gneiss and Lioz limestone, with metallic plates and mortar connecting the Gneiss blocks. Currently, deteriorations in the fountain stones can be observed such as light stains and some aesthetic modifications caused by inadequate restorations. Petrography, XRF, XRD, Physical Properties, Colorimetry, Electrical Conductivity, ICP-OES, SEM-EDX, and TGA were performed in order to characterize the Gneiss blocks, the metallic plates, the stones used in previous restorations, as well as light stains observed on the Gneiss blocks. The petrography and XRD analyses inferred that light stains may have been caused by the formation of an insoluble salt as a result of the association of the lead from the plates with other elements. The XRD analysis on the light staining area indicated presence of cerussite (PbCO₃), and anglesite (PbSO₄), which are the probable cause of the light stains. The SEM-EDX results suggested that sulfur is the main element associated to lead.

Objectives: Chronic pulmonary aspergillosis (CPA) is a fungal lung infection characterized by slowly progressive destruction of the lung parenchyma and has four main subtypes. The objective of this work was to evaluate the epidemiology of CPA in our area and evaluate the involvement of the different subtypes in mortality. Methods: This was a descriptive longitudinal retrospective study developed in three tertiary hospitals in Spain. Among all patients admitted with a pulmonary aspergillosis diagnosis, we selected those who fulfilled the criteria for chronic aspergillosis according to the criteria of Denning, excluding those with a haematological disorder. Results: Among 409 inpatients recorded as having pulmonary aspergillosis infection, only 76 (18.5%) fulfilled the criteria for CPA, with an estimated incidence of 0.67 cases/100,000 inhabitants/year. The subtypes detected were subacute invasive aspergillosis (SAIA) in 33 (43.4%) patients, simple aspergilloma (SA) in 25 (32.9%) patients, cavitary chronic aspergillosis (CCPA) in 13 (17.1%) patients and chronic fibrosant (CFAP) in 5 (6.5%) patients. The overall three-month mortality was 23%, which was higher in SAIA patients. The predictors of early mortality were age >65 years (OR 3.0 CI 95 1.0–9.5 0.043) and SAIA subtype vs. other subtypes (OR 3.1 CI 95 1.0–9.5 p 0.042). Conclusions: The incidence rate estimated was inferior to that previously reported. Three-month mortality in patients with CPA was high, with older age and SAIA subtype being the variable independent predictors of a worse prognosis.

In the context of Shared Autonomous Vehicles, the need to monitor the environment inside the car will be crucial. This article focuses on the application of deep learning algorithms to detect objects, namely lost/forgotten items to inform the passengers, and aggressive items to monitoring if violent actions may arise between passengers. For object detection algorithms was used public datasets (COCO and TAO) to train state-of-the-art algorithms, such as YOLOv5. For violent action detection was used the MoLa InCar dataset to train on state-of-the-art algorithms such as I3D, R(2+1)D, SlowFast, TSN and TSM. At the end an embedded automotive solution was used to demonstrate both methods running in real-time.

When a limb suffers a fracture, rupture, or dislocation, it is traditionally immobilized with plaster. This may induce discomfort in the patient, excessive itching and sweating, which creates the growth of bacteria, leading to an unhygienic and difficulty to keep clean from treatment. Furthermore, if the plaster remains for a long period, it may cause lesions in the joints and ligaments. To overcome all these disadvantages, orthoses have emerged as important medical devices to help patients in rehabilitation, as well as for self-care of deficiencies in clinics and daily life. Traditionally, these devices are produced manually, which becomes time-consuming and error prone. From another point-of-view, it is possible to use imageology (X-ray or computed tomography) to scan the human body; a process that may help orthoses manufacturing but induces radiation to the patient. To overcome this great disadvantage, several types of 3D scanners, without any kind of radiation have emerged. This article describes the use of various types of scanners capable of digitizing the human body, to produce custom orthoses. Studies have shown that photogrammetry is the most used and most suitable 3D scanner for the acquisition of the human body in 3D. With this evolution of technology, it is possible to decrease the scanning time and it will be possible to introduce this technology in clinical environment.

The development in information technology has played an influential role in transforming the restaurant industry services. Therefore, this research’s main agenda is to investigate factors that motivate employees to adopt and continue using information technology services by integrating two famous information system (IS) theories, namely, task technology fit (TTF) and technology continuance theory (TCT). The extant integrative perspective model details the cause-effect relationship between technology adoption and continuance intention. The positivist paradigm forms the basis of this research design, and the approach followed is quantitative research. Using the stratified random sampling technique, the empirical data was collected from 417 restaurant industry employees in the US (United States) on a five-point Likert scale. The PLS-SEM technique was utilized to analyze data while using Smart PLS 3 because of its suitability and wider application currently in the hospitality sector. Results suggest that the recently developed integrated technology continuance research model has considerable influence on predicting pre- and post-adoption behavior with continuance intention for technology usage within the restaurant industry. All hypotheses were found significant except one for the direct association of hedonic motivation and continuance intention of technology adoption. Moreover, the results revealed that factors like perceived security & information privacy and assisting conditions were the most important factors in determining the usage of information technology with continuance intention. Unlike previous research studies that focus majorly only on issues before adoption of informational technology usage, the current focus on investigating continuance intention toward information technology usage by focusing on factors that can also boost post-adoption behavior and pre-adoption usage information technology.

The saltmarsh plant Halimione portulacoides was shortly exposed to realistic levels of inorganic mercury (iHg), aiming to investigate adaptative processes of the roots and leaves regarding re-dox homeostasis, physiology, and Hg accumulation. Plants were collected at a contaminated (CONT) and a reference (REF) site, addressing the interference of contamination background. The influence of major abiotic variables (i.e., temperature and light) was also examined. Total Hg lev-els, antioxidant enzymes, lipid peroxidation (LPO), and photosynthetic activity were analyzed after 2 and 4 hours of exposure. Accumulation of iHg in the roots was noticed poorly, and no translocation to stems and leaves was found, but plants from CONT seemed more prone to iHg uptake (in winter). Despite that, antioxidant modulation in roots and leaves was found, disclos-ing, in winter, higher thresholds for the induction of enzymatic antioxidants in CONT leaves compared to REF, denoting that the former are better prepared to cope with iHg redox pressure. Consistently, CONT leaves exposed to iHg had remarkably lower LPO levels. Exposure did not impair the photosynthetic activity, pinpointing H. portulacoides ability to cope with iHg toxicity under a very short-term exposure. Biochemical changes were noticed before enhancements in ac-cumulation, reinforcing the relevance of these responses in precociously signaling iHg toxicity.

The odontogenic cysts can lead to a bone destruction that can hamper the dental implant place-ment in the ideal 3D position. Different biomaterials and techniques that allow bone regeneration are described in the literature, each with its advantages and disadvantages. This clinical case with 18 months of follow-up shows the enucleation of an odontogenic cyst fol-lowing the guide bone regeneration with fence technique. After 6 months 2, dental implants were placed at the region of tooth 11 and 21, being rehabilitated nine weeks after. The fence technique allowed the recovery of the bone morphology and the placement of the dental implants in the 3D ideal position.

The Haar wavelet decomposition technique is used to detect the planetary magnetosphere boundaries and discontinuities. We use the magnetometer data from the CASSINI and MESSENGER spacecraft to identify the abrupt changes in the magnetic field when the spacecraft crossed the magnetospheric bow shocks and magnetopauses of Saturn and Mercury, respectively. The results confirm that the Haar transform can efficiently identify the planetary magnetosphere boundaries characterized by the abrupt magnetic field changes. It is suggested that this technique can be applied to detect the planetary boundaries as well as the discontinuities such as the shock waves in the interplanetary space.

Intrusion Detection Systems play a crucial role in a network. They can detect different network attacks and raise warnings on them. Machine learning-based IDSs are trained on datasets that, due to the context, are inherently large, since they can contain network traffic from different time periods and often include a large number of features. In this paper, we present two contributions: the study of the importance of feature selection when using an IDS dataset, while striking a balance between performance and the number of features; and the study of the feasibility of using a low-capacity device, the Nvidia Jetson Nano, to implement an IDS in a low-capacity network. The results, comparing the GA with other well-known techniques in feature selection and reduction, show that the GA has a higher F1-score of 76%, although the time to find the optimal set of features surpasses other methods; the reduction of the number of features reduces the processing time without a significant impact in f1-score. The Jetson Nano allows the classification of network traffic with an overhead of 10 times in comparison to a traditional server.

Among the leading immersive technologies, Augmented Reality is one of the most promising and empowering to support designers in production environments. This research investigates the application of mobile augmented reality, based on the Web, as a mediation tool focused on cognitive activities of reading and understanding of Technical Drawings in the production and assembly for Tailor Made projects of the scenographic industry. In this context, the research presents a method to use the WebAR to improve the reading of technical drawings, seeking efficiency on the visualization of models and the exchange of information between professionals, involved in the processes of design, production and assembly of products, in the scope of scenography. This mediation tool was developed using Web AR platforms, compatible with native libraries (ARCore and ARKit) to ensure, first, compatibility with commonly used devices that workers or businesses can access, and secondly, to leverage hybrid tracking techniques that combine vision and sensors to improve the reliability of augmented reality viewing. The proposed solution adopts multiple tracking and navigation techniques in order to expand Space Skills components to provide greater exploratory freedom to users. The research process took place in the light of the Design Science Research Methodology and the DSR-Model, since it aimed to develop a solution to a practical problem, as well as to produce knowledge from this process. Field experiments were conducted in two real companies, with end users on their respective mobile devices, in order to evaluate usability and behavioral intent, through the Acceptance, Intent and Use of Technology questionnaires; and perceived mental workload, NASA-TLX. The experimental results show that the adoption of this tool reduces the cognitive load in the process of reading technical drawings and project´s understanding. In general, it´s usability and intent to use provide significant levels of satisfaction, being positively accepted by all participants involved in the study.

Urban tourism has witnessed significant growth in recent years, driven by various factors that foster the transformation of urban areas into tourist hotspots. These factors include a rising interest in culture and heritage, ongoing urban redevelopment and conversion processes, and the introduction of new experiences and activities. Two particularly influential factors contributing to this growth are low-cost travel, which facilitates more accessible access to urban destinations, and the emergence of new types of accommodation, such as short-term rental (also known as local accommodation or Airbnb-type accommodation). This sudden and continuous growth of this type of tourist accommodation brings new challenges to cities and local communities. On the positive side, it contributes to job opportunities, the dynamism of the local economy, and urban revitalization. On the other hand, it also represents more difficulty in retaining the local population in city centers, as more and more buildings are converted into hostels and tourist apartments. In this context, it becomes essential to conduct studies evaluating the impacts of these dynamics in urban areas and how they influence residents' and visitors' perspectives. Therefore, this study aims to identify the main transformations resulting from short-term rental (STR) development, focusing on the impacts felt by tourists and residents in Porto. A questionnaire was distributed to tourists and residents in Porto's city center in June 2023. The results reveal differences in opinions between tourists and residents, particularly concerning historical heritage preservation, local population relocation, and reduced housing availability for residents. Nevertheless, there is a similarity in their opinions regarding the stimulus that local accommodation brings to the economy and the rehabilitation of buildings and urban areas. This study reinforces the need to pay more attention to the future development of tourist accommodation in city centers, especially regarding local policies and territorial planning, to balance better tourism development and local communities' quality of life.

More than 700 anthocyanins are described so far, and many different sources are rich in these natural pigments. During the last few years, researchers have been focusing of strategies to recover and purify anthocyanins, from simple liquid-liquid extractions to more advanced supercritical CO2 extractions, however, with such a huge number of different sources, it’s extremely hard to get a simple and fast methodology that fits several sources, not only by the structural nature of the anthocyanins but also by the presence of specific groups of natural compounds. Using simple methodologies like solid-phase extraction resins represents a powerful economical and efficiency strategy. In this work, we tested several sources of structurally distinct anthocyanins, including purple basil, purple cabbage, purple sweet potato, butterfly pea flower, cornflower and wild pansy, in different resins to assess their efficiency in the obtention of anthocyanin-pure extracts. The results showed us that the combination of oasis HLB® resin followed by a cation-exchange SPE with DSC-MCAX® resulted in high-purity anthocyanin extracts for all the cases.

Technological progress brings new tools to help society's development. In this context, the Internet of Things (IoT) helps to advance modern society. By connecting everyday objects and devices to the Internet, IoT enables benefits such as efficiency and automation, healthcare, environmental sustainability, safety, security, and data-driven decision-making. One of the possible technologies for devices' communication is LoRa, a wireless technology designed for the IoT that allows devices to communicate over long ranges using little battery power. This makes it useful for situations where it is needed to connect many devices spread out over a large area, like in smart cities or industrial settings. This paper aims to verify and evaluate the LoRa communication signal loss in a building environment. For this evaluation, we collected and processed data through experiments with LoRa links in the Instituto Federal de Pernambuco (IFPE) Campus.

The coronavirus disease 2019 (COVID-19) pandemic caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) challenges include understanding what triggered SARS-CoV-2 emergence, how this RNA virus is evolving or how the genomic variability may impact the primary structure of proteins that are targets for vaccine. We analyzed 19471 SARS-CoV-2 genomes and 199,984 spike glycoprotein sequences available at the GISAID database from all over the world and 3335 genomes of other Coronoviridae family members available at Genbank, collecting SARS-CoV-2 high-quality genomes and distinct Coronoviridae family genomes. Here, we identify a SARS-CoV-2 emerging cluster containing 13 closely related genomes isolated from bat and pangolin that showed evidence of recombination, which may have contributed to the emergence of SARS-CoV-2. The analyzed SARS-CoV-2 genomes presented 9632 single nucleotide polymorphisms (SNPs) corresponding to a variant density of 0.3 over the genome, and a clear geographic distribution. SNPs are unevenly distributed throughout the genome and hotspots for mutations were found for the spike gene and ORF 1ab. We describe a set of predicted spike protein epitopes whose variability is negligible. All predicted epitopes for the structural E, M and N proteins are highly conserved. This result favors the continuous efficacy of the available vaccines.

Cancer patients may experience significant distress. The “Emotion Thermometers” (ETs) are a short visual analogue scale used to screen patients for psychosocial risk. This study aimed to assess emotional distress in a large sample of cancer patients attending psychological services at an NGO, and to explore factors that may contribute to it. The ETs were answered by 899 cancer patients. They were, on average, 59.9 years old, the majority were female, had breast cancer, were under treatment or were disease-free survivors, and reported high levels of emotional distress, above the cut-off (≥5). A Generalized Linear Model was used to measure the association between the level of Distress and 33 items of the problem list. Four items - sadness, depression, sleep and breathing - were found to be significantly related to a higher level of Distress. Additionally, women and those who were in the palliative phase also had significantly higher levels of Distress. Conclusions: The results confirm the need for early emotional screening in cancer patients, as well as the relevance of attending to the characteristics of each patient. Additionally, they highlight the utility of the ETs for the clinical practice, allowing to optimize the referral to specialized psy-chosocial services.

Wireless power transfer promises to revolutionize the way we use and power mobile devices. However, low transfer efficiencies prevent this technology from seeing wide scale real-world adoption. The aim of this work is to use quasioptics to develop a system composed of a dielectric lens fed by a phased array to reduce spillover losses, increasing the beam efficiency, while working on the antenna system’s Fresnel zone. The DC-RF electronics, digital beamforming and beam-steering by an FPGA, and radiating 4x4 microstrip patch phased array have been developed and experimented upon, while the lens has been designed and simulated. This paper details these preliminary results, where the phased array radiation pattern was measured, showing that the beam is being generated and steered as expected, prompting the lens construction for the complete system experimentation.

The intensive global use of glyphosate has led to the evolution of glyphosate resistant (GR) weed species, including the economically damaging horseweed (Conyza sumatrensis). We evaluated the glyphosate resistance mechanisms of C. sumatrensis. While 5-enolpyruvylshikimate-3-phosphate synthase activity was similar between the glyphosate resistant (GR) and nonresistant biotypes, plants from the GR population accumulated lower shikimate levels than susceptible ones, suggesting the absence of target-site resistance mechanisms. Decreases over time in glyphosate concentrations in GR leaves were not accompanied by increases in glyphosate concentrations in their stem and roots, indicating lower glyphosate distribution rates in GR plants. The early appearance of aminomethylphosphonic acid (the main glyphosate metabolite) in leaves, as well as its presence only in the stems and roots of GR plants, suggests faster glyphosate metabolism in GR plants than in susceptible ones. GR plants treated with glyphosate also showed greater antioxidant (ascorbate peroxidase [APX] and catalase [CAT]) and cytochrome P450-enzyme activities, indicating their great capacity to avoid glyphosate-induced oxidative stress. Three non-target mechanisms (reduced glyphosate translocation, increased metabolism, and increased antioxidant activity) therefore confer glyphosate resistance in C. sumatrensis plants. This is the first time that APX, CAT and P450 enzyme activities are related to GR in C. sumatrensis.

In this work, dry and hydrothermal carbonization (DC and HTC) of RDF pellets were conducted to evaluate the physical, chemical, and fuel properties of the produced chars. In the dry carbonization tests, biomass sawdust was incorporated in different proportions on the samples to minimize agglomeration caused by the melting of the plastic fraction. The experiments were carried out in a temperature of 400°C (DC) and 250-300°C (HTC), in a residence time of 30 minutes. The respective chars and hydrochars were characterized according to their mass yield, apparent density, proximate, elemental, and mineral composition, chlorine content, high heating value, thermogravimetric profile, and surface functional groups. The results showed that dry carbonization of RDF pellets with biomass incorporation, followed by a washing step, resulted in the production of chars with improved properties such as higher fixed carbon and HHV (25-26 MJ/kg) and lower ash and chlorine content. Additionally, the HTC experiments demonstrated that hydrochars showed improved properties without the need for biomass addition and washing, however, with no significant difference in the HHV (20-21 MJ/kg). Therefore, DC of RDF pellets with 10% biomass incorporation seems to be a promising option to overcome the constraints of RDF utilization as an alternative fuel.

Immersive Unit Visualization is an emergent form of visualization that arose from Immersive Analytics where, unlike traditional visualizations, each data point is represented by an individual visual mark in an immersive virtual environment. This practice has focused almost exclusively on virtual reality, excluding augmented reality (AR). This article develops and tests a prototype of an immersive Unit Visualization (Floating Companies II) with two AR devices: head-mounted display (HMD) and hand-held display (HHD). Results from the testing sessions with 20 users were analyzed through qualitative research analysis and thematic coding indicating that, while the HHD enabled a first contact with AR visualization on a familiar device, HMD improved the perception of hybrid space by supporting greater stability of virtual content; wider field of view; improved spatial perception; increased sense of immersion; and more realistic simulation, which impacted on information reading and sense-making. The materialization of abstract quantitative values into concrete reality through its simulation in the real environment and the ludic dimension stand out as important opportunities of this type of visualization. This paper investigates the aspects distinguishing two experiences regarding data visualization in hybrid space; and characterizes ways of seeing information with AR, identifying opportunities to advance information design research.

This study examines the potential of combining decision support approaches to identify optimal bundles of ecosystem services. A forested landscape, Zona de Intervenção Florestal of Paiva and Entre-Douro and Sousa (Portugal), is used to test and demonstrate this potential. The landscape extends over 14,000 ha, representing 1,976 stands. The property is fragmented into 376 holdings. The overall analysis was performed in three steps. First, we selected six alternative solutions (A to F) in a Pareto frontier generated by a multiple criteria method within a decision support system (SADfLOR) for subsequent analysis. Next, an aspatial strategic multi-criteria decision analysis (MCDA) analysis was performed with the Criterium DecisionPlus (CDP) component of another decision support system (EMDS) to assess the aggregate performance of solutions A to F for the entire forested landscape with respect to their utility for delivery of ecosystem services. For the CDP analysis, SADfLOR data inputs were grouped into two sets of primary criteria: Wood Harvested and Other Ecosystem Services. Finally, a spatial logic-based assessment of solutions A to F for individual stands of the study area was performed with the NetWeaver component of EMDS. The NetWeaver model was structurally and computationally equivalent to the CDP model, but the key NetWeaver metric is a measure of the strength of evidence that solutions for specific land stands were optimal for the unit. Solutions D and B performed best in the aspatial strategic MCDA analysis, and a composite of the maps generated by NetWeaver demonstrated the spatial basis for the performance of solutions D and B in individual land stands. We conclude with a discussion of how the combination of decision support approaches encapsulated in the two systems could be further automated.

This study analyzed the relationship between anthropometric measures, cardiorespiratory capacity, strength, power and local muscle endurance with performance in the CrossFit® Open 2020. For this, 17 volunteers (6 women) (29.0 ± 7.2 years; 70.5 ± 9.8 kg) completed, on separate weeks, body composition (dual-energy x-ray absorptiometry), maximal oxygen consumption (2km row test), muscle strength (1RM back and front squat, isometric peak torque), and muscle power (1RM snatch and clean & jerk), and muscle endurance (Tibana test), which were compared with performance during the CrossFit® Open 2020. Multiple linear regression showed that for the CrossFit Open 2020.1 and 2020.2 workouts, the score in the Tibana test was the only variable that explained the outcomes (Beta = -0.78, p < 0.01 for 2020.1 workout and Beta = 0.82, p < 0.01 for 2020.2 workout). Performance in the CrossFit Open 2020.3 and 2020.4 workouts were explained through the relative strength (Beta = 0.58, p = 0.02 for 2020.3 workout and Beta = 0.50, p = 0.04 for 2020.4 workout). Lastly, Tibana test had the greatest influence on CrossFit Open 2020.5 workout (Beta = -0.75, p < 0.01). A local muscle endurance and muscle strength may be used to predict CrossFit® open workout performance.

The sustainability of agroecological systems, biodiversity protection, animal welfare and consumer demand for higher-quality products from alternative and extensive farming methods, have reinforced interest in local breeds that are well adapted to low-input environments. However, food safety needs to be safeguarded to reinforce consumer confidence. The aim of this study was to conduct a preliminary investigation on the occurrence of Salmonella spp. in eggshells, hen’s cloaca and litter materials from autochthonous Portuguese laying hens raised in a semi-extensive system for small-scale production. A total of 279 samples were obtained, with 63 samples from the “Preta Lusitânica” breed, and 72 samples each from the remaining autochthonous breeds, namely “Branca”, “Amarela” and “Pedrês Portuguesa”. None (0%) of the samples analyzed were positive for Salmonella spp.. To the best of our knowledge, these are the first results of Salmonella evaluation from hen’s cloaca, eggshells, and litter materials in autochthonous Portuguese chickens, suggesting that a semi-extensive production system can contribute to better food security and a lower risk to public health and the environment.

Smart Grid systems have become popular and necessary for the development of a sustainable power grid. These systems use different technologies to provide optimized services to the users of the network. Regarding computing, these systems optimize electrical services by processing a large amount of data generated. However, privacy and security are essential in this kind of system. With a large amount of data generated, it is necessary to protect the privacy of users, because this data may reveal users’ personal information. Today, blockchain technology has proven to be an efficient architecture for solving privacy and security problems in different scenarios. Over the years, different blockchain platforms have emerged, attempting to solve specific problems in different areas. However, the use of different platforms fragmented the market, which was no different in the smart grid scenario. This work proposes a blockchain architecture that uses sidechains to make the system scalable and adaptable. We used three blockchains to ensure privacy, security, and trust in the system. To universalize the proposed solution, we used the OSGP protocol and smart contracts. The results show that architecture security and privacy are guaranteed, making it feasible for implementation in real systems. Although scalability issues regarding the storage of data generated still exists.

In wild habitats, fruit dehiscence is a critical strategy for seed dispersal; however, in cultivated crops it is one of the major sources of yield loss. Therefore, indehiscence of fruits, pods, etc., was likely to be one of the first traits strongly selected in crop domestication. Even with the historical selection against dehiscence in early domesticates, it is a trait still targeted in many breeding programs, particularly in minor or underutilized crops. Here, we review of this trait in pulse (grain legume) crops, which are of growing importance as a source of protein in human and livestock diets, and which have received less attention than cereal crops and the model plant Arabidopsis thaliana. We specifically focus on the i) history of indehiscence in domestication across legumes, ii) structures and the mechanisms involved in shattering, iii) the molecular pathways underlying this important trait, iv) an overview of the extent of crop losses due to shattering, and the effects of environmental factors on shattering, and, v) efforts to reduce shattering in crops. While our focus is mainly pulse crops, we also included comparisons to crucifers and cereals because there is extensive research on shattering in these taxa.

Exosomes have shown promising potential as a therapeutic approach for wound healing. Nevertheless, the translation from experimental studies to commercially available treatments is still lacking. To assess the current state of research in this field, a systematic review was performed to examine the methodological heterogeneity among studies conducted over the past five years. Additionally, the review analyzed the suitability of animal models used and their relevance to human medicine. A PubMed search was performed for english-language, full-text available papers published from 2018 to June 2023, focusing on exosomes derived from mammalian sources and their application in wound healing, particularly those involving in vivo assays. Out of 531 results, 148 papers were selected for analysis. The findings revealed significant variability in terms of cell sources and types, biomaterials, and administration routes under investigation, indicating the need for further research in this field. Additionally, a comparative examination encompassing diverse cellular origins, types, administration pathways, or biomaterials is imperative. Furthermore, the predominance of rodent-based animal models raises concerns, as there have been limited advancements towards more complex in vivo models and scale-up assays. These constraints underscore the substantial efforts that remain necessary before attaining commercially viable and extensively applicable therapeutic approaches using exosomes.

Type 2 Diabetes Mellitus is a chronic metabolic disease that poses a significant long-term health risk due to its debilitating complications. While the diagnosis and monitoring of diabetes are well-established, the monitoring of its numerous complications presents a challenge, which can compromise patients' prognosis and quality of life. We analyzed the proteome of ten saliva samples, five from healthy individuals and five from patients with Type 2 Diabetes Mellitus. The aim was to identify potential biomarkers of Type 2 Diabetes Mellitus and its complications. We used PANTHER and FUNRICH tools to conduct a functional analysis and enrichment approach. Our findings revealed 622 proteins involved in 16 disrupted biological processes, which are linked to Type 2 Diabetes Mellitus. Metabolic processes, response to stimuli, processes of the immune system, and signaling are notable due to their known relation with Type 2 Diabetes Mellitus. Enrichment analysis has revealed that there are eleven biological processes that have been deregulated. These processes involve twenty different salivary proteins that are associated with multiple complications in diabetes. Our findings demonstrate that saliva is a dependable source of possible biomarkers that can be used to monitor diabetes and its complications.

The purpose of this study was to assess if self-regulation of intensity based on rating of perceived exertion (RPE) is a reliable method to control the intensity of metabolic conditioning of functional-fitness session. In addition, the relationship between RPE and changes in heart rate and lactate responses was also analyzed. Eight male participants (age 28.1 ± 5.4 years; body mass 77.2 ± 4.4kg; VO₂max: 52.6 ± 4.6 mL·(kg·min)⁻¹) completed three randomly sessions (5 to 7 days apart) under different conditions: (1) all-out (ALL); (2) self-regulation of intensity based on a RPE of 6 (hard) on the Borg CR-10 scale (RPE6); and (3) a control session. Rate of perceived exertion, LAC and HR response were measured pre, during and immediately after the sessions. The RPE and LAC during the ALL-OUT sessions were higher (p ≤ 0.05) than the RPE6 and control sessions for all the analyzed time points during the sessions. Regarding HR, the 22 min area under the curve of HR during ALL-OUT and RPE6 sessions were significantly higher (p ≤ 0.05) than the control session. The average number of repetitions was lower (p ≤ 0.05) for the RPE6 session (190.5 ± 12.5 repetitions) when compared to the ALL session (214.4 ± 18.6 repetitions). There was a significant correlation between RPE and LAC (p = 0.001; r = 0.76; very large) and number of repetitions during the session (p = 0.026; r = 0.55; large). No correlation was observed between RPE and HR (p = 0.147; r = 0.380). These results indicate that self-regulation of intensity of effort based on RPE may be a useful tool to control exercise intensity during a metabolic conditioning session of functional-fitness.

The flavor, aroma and color of coffee may change due to mechanical damage, reducing its qual-ity. To measure the mechanical response of materials, compression tests can be performed, de-termining the effect of force application on the mechanical behavior of the fruit at different stages of ripeness. In this context, this study aimed to analyze the deformation, strain energy and equivalent von Mises stress of coffee fruits at mature, semi-mature and immature maturation stages and compressed by collapse forces. Compression in three directions (x, y and z) was sim-ulated on coffee fruit models using the finite element method, with a compression support in the direction opposite to the force application axis. The numerical simulation of the compression process allowed to verify that the more mature the fruit, the greater the associated mean defor-mation (2.20 mm mm-1, 0.78 mm mm-1 and 0.88 mm mm-1), the lower the mean strain energy (0.07 mJ, 0.21 mJ and 0. 34 mJ) and the lower the mean equivalent von Mises stress (0.25 MPa, 1.03 MPa and 1.25 MPa), corresponding to ripe, semi-ripe and immature fruits; and these proper-ties may be used to analyze how processes in the production chain affect the amount of mechan-ical damage.

Socioeconomically disadvantaged people are disproportionally more likely to develop obesity and obesity-related diseases. However, it remains unclear to what extent diet quality contributes to socioeconomic inequalities in obesity. We aimed to assess the role of diet quality in the association between socioeconomic status (SES) and obesity. Data originated from the national nutrition survey, a cross-sectional sample of the adult Swiss population (N=1860). We used education and income as proxies for SES; calculated the Alternate Healthy Eating Index (AHEI) as measure of diet quality; and used body mass index (BMI), waist circumference (WC), waist-to-hip ratio (WHR), and waist-to-height ratio (WHtR) as obesity markers. We applied counterfactual mediation modelling to generate odds ratios, 95% confidence intervals, and the proportion mediated by diet quality. Individuals with less than a tertiary education were two to three times more likely to be obese, regardless of the marker (OR; 95% CI: 3.36 (2.01, 5.66) using BMI; 2.44 (1.58, 3.75) using WC; 2.48 (1.63, 3.78) using WHR; and 2.04 (1.43, 2.96) using WHtR). The proportion of the association between educational level and obesity that was mediated by diet quality was 22.1% using BMI, 26.6% using WC, 31.4% using WHtR, and 35.8% using WHR. Similar findings were observed for income. Our findings suggest that diet quality substantially contributes to socioeconomic inequalities in obesity while it does not fully explain them. Focusing efforts on improving the diet quality of disadvantaged groups could help reduce social inequalities in obesity.

A single farmed fish species assimilates about 20% of the nutrients in the supplied diet. This study evaluated if the culture of complementary ecological-function species can recover nutrients dispersed into the water and transform them into high-valued biomass. A completely randomized experiment was designed with three treatments and four replications of each production system: monoculture of lambari (Astyanax lacustris); integrated aquaculture of lambari and Amazon river prawn (Macrobrachium amazonicum); and integrated aquaculture of lambari, Amazon river prawn, and curimbatá (Prochilodus lineatus). Fingerlings of lambari (0.8 ± 0.8 g) were stocked in twelve earthen-ponds (0.015 ha) at the density of 50 fish m^-2. Eight ponds, were stocked with juveniles of Amazon river prawn (1.1 ± 0.2 g) at the density of 25 prawn m⁻². Four of these eight ponds were stocked with curimbatá fingerlings (0.2 ± 0.1 g) at a density of 13 fish m^-². Only lambari was fed twice a day with an extruded commercial diet. The experiment lasted 60 days when lambari attained commercial size. The inclusion of prawn increased the total species yield from 1.8 to 2.4 t ha^-1 cycle^-1 and reduced the feed conversion ratio (FCR) from 2.5 to 1.8. The inclusion of prawn and curimbatá increased the total yield to 3.2 t ha^-1 cycle^-1 and reduced the FCR to 1.4. Therefore, the integrated culture of lambari, prawn, and curimbatá improves the use of space, water, feed, and benthic species can recover the large quantity of nutrients accumulated in the bottom of lambari pond production, converting them into high-nutritional and monetary-valued biomass.

Control of Tropical Theileriosis, a tick-borne disease with a strong impact on cattle breeding, can be facilitated by using marker-assisted selection in breeding programs. Genome-wide association studies (GWAS) using high-density arrays are extremely important for the ongoing process of identifying genomic variants associated with resistance to Theileria annulata infection. In this work, Single Nucleotide Polymorphisms (SNPs) were analyzed in the Portuguese autochthonous cattle breeds Alentejana and Mertolenga. In total, 14 SNPs suggestive of significance (p ≤ 10-4) were identified for Alentejana cattle and 20 SNPs for Mertolenga cattle. The genomic regions around these SNPs were further investigated for annotated genes and Quantitative trait loci (QTLs) previously described by other authors. Regarding the Alentejana breed, the MAP3K1, CMTM7, SSFA2, and ATG13 genes are located near suggestive SNPs and appear as candidate genes for resistance to Tropical Theileriosis, considering its action the immune response and resistance to other diseases. On the other hand, in the Mertolenga breed, the UOX gene is also a candidate gene due to its apparent link to the pathogenesis of the disease. These results may represent a first step towards the possibility of including genetic markers for resistance to Tropical Theileriosis in current breed selection programs.

The study describes the acute and delayed time course of recovery following the CrossFit® Benchmark Workout Karen. Eight trained men (28.4±6.4 years; 1RM back squat 139.1±26.0 kg) undertook the Karen protocol. The protocol consists of 150 Wall Balls, aiming to hit a target 3 meters high. Countermovement jump height (CMJ), creatine kinase (CK), and perceived recovery status scale (PRS) (general, lower and upper limbs) were assessed pre, post-0h, 24h, 48h and 72h after the session. The CK concentration 24h after was higher than pre-exercise (338.4 U/L vs. 143.3 U/L; effect size: 0.74; p≤0.05). At 48h and 72h following exercise, CK concentration had returned to baseline levels. The PRS general and of the lower limbs were lower in the 24-hours post-exercise compared to pre-exercise (PRS general: 4.7 ±1.5 and 7.9 ±1.7 mmol/L; and PRS of the lower limbs: 4.0 ±2.5 and 7.9 ±0.8, respectively). The PRS general, lower, and upper limbs were reduced at 48-post exercise compared to 72-hours post-exercise scores. Our findings provide insights into the fatigue profile and recovery in acute CrossFit® and can be useful to coaches effectively design the daily session.

Identifying cracks in the incipient state is essential to prevent the failure of engineering structures. Detection methods relying on the analysis of the changes in modal parameters are widely used because of the advantages they present. In our previous research, we have found that eigenfrequencies were capable of indicating the position and depth of damage when sufficient vibration modes were considered. The damage indicator we developed was based on the relative frequency shifts (RFS). To calculate the RFSs for various positions and depths of a crack, we established a mathematical relation that involved the squared modal curvatures in the healthy state and the deflection of the healthy and damaged beam under dead mass, respectively. In this study, we propose to calculate the RFS for beams with several cracks by applying the superposition principle. We demonstrate that this is possible if the cracks are far enough from each other. In fact, if the cracks are close to each other, the superposition method does not work and we distinguish two cases: (i) when the cracks affect the same beam face, the frequency drop is less than the sum of the individual frequency drops, and (ii) on the contrary, cracks on opposite sides cause a decrease in frequency, which is greater than the sum of the frequency drop due to individual damage. When the RFS curves are known, crack assessment becomes an optimization problem, the cost function being the distance between the measured RFSs and all possible RFSs for several vibration modes. Thus, the RFS constitutes a benchmark that characterizes damage using only the eigenfrequencies. We can accurately locate multiple cracks and estimate their severity trough experiments and thus prove the reliability of the proposed method.

Over the last two decades, a considerable amount of equipment has been acquired (spreaders, seeders, sprayers, among others) to respond to the challenges of Precision Agriculture (PA) concept. Most of this equipment has been purchased at a high cost. However, many of them, despite still being functional and equipped with sensors, actuators, and electronic processing units capable of adjusting to variations in speed, have become obsolete in terms of communication, and incompatible with new monitoring and control systems based on the “Isobus” protocol. This work aims to present a solution for updating the control system (“Ferticontrol”) of a “Vicon RS-EDW” spreader with variable rate application (VRA), making it compatible with the “InCommand” system from “Ag Leader”. The solution includes low-cost “Arduino” and “Raspberry Pi” microcontrollers and open-source software. The development shows that it is possible to implement a solution that is accessible to farmers in general. It also provides a niche business opportunity for young researchers to set up small technology-based enterprises associated with universities and research centers. These partnerships guarantee permanent innovation and represent a decisive step towards modern, technological, competitive, and sustainable agriculture.