This study investigates the relationship between clean and dirty energy markets, specifically focusing on clean energy stock indexes and their potential as hedging assets and safe havens during periods of global economic uncertainty. The research analyzes five clean energy indexes and five dirty energy indexes from May 2018 to May 2023, considering events like the global pandemic and the Russian invasion of Ukraine. The main objective is to examine the causal relationship among different stock indexes pertaining to dirty and clean energy by using the Granger causality test (VAR Granger Causality/Block Exogeneity Wald Test) to determine whether clean energy indexes can predict future prices of dirty energy indexes. However, the findings reveal that clean and dirty energy indexes do not exhibit hedging characteristics or serve as safe havens during times of economic uncertainty, rejecting the research question. These results have important implications for investment strategies, as assets lacking safe haven characteristics may not preserve portfolio efficiency in uncertain times. The study's insights provide valuable guidance for investors, poli-cymakers, and participants in energy financial markets. It highlights the need to adapt investment approaches and seek alternative options to navigate uncertain economic conditions effectively.

Green investors have expressed concerns about the environment and sustainability due to the high energy consumption involved in cryptocurrency mining and transactions. This article investigates the safe haven characteristics of clean energy stock indexes in relation to 3 cryptocurrencies, taking into account their respective levels of "dirty" energy consumption from May 16, 2018, to May 15, 2023. By virtue of analyzing a tumultuous era in the global economy, the level of integration between clean energy stock indexes and cryptocurrencies will be inferred by using Gregory and Hansen's methodology. Furthermore, to assess the presence of a volatility spillover effect between clean energy stock indexes and “dirty-classified” cryptocurrencies, the ?-test of heteroscedasticity of two samples from Forbes and Rigobon will be employed. The empirical findings show that clean energy stock indexes may offer a viable safe haven for dirty energy cryptocurrencies. However, the precise associations differ depending on the cryptocurrency under examination. The implications of the study's results are significant for investment strategies, this knowledge can inform decision-making procedures and facilitate the adoption of sustainable investment practices. Investors and policymakers can gain a deeper understanding of the interplay between investments in renewable energy and the cryptocurrency market.

This study investigates the relationship between energy metals and precious metals to assess their suitability as safe haven assets in clean energy investment portfolios. It focuses on the impact of events in 2020 and 2022, characterized by substantial investments in clean energy. The research reveals that, except for Nickel Futures (NICKELc1), energy metals are positively linked with clean energy indexes. This suggests that they can serve as a secure investment option for green investors looking to diversify their portfolios. As a result, the study dismisses the initial question, indicating that energy metals can indeed be considered safe havens within the context of clean energy investments. Additionally, the research reinforces prior findings that precious metals like gold, silver, and platinum possess safe haven characteristics in relation to specific clean energy stock indexes. These results have significant implications, particularly given the increasing investments in clean energy stocks and the recurring uncertainties in the market. In summary, this study supports the idea that both energy metals and precious metals can play valuable roles in clean energy portfolios, providing stability during turbulent times in the market.

The city of Lisbon, has any other capital of a European country, has a large number of issues while managing the waste and recycling containers spread throughout the city. This document presents the results of a study promoted by the Lisbon City Council for trialing LPWAN technology on the waste management vertical under the Lisbon Smart City initiative. Current waste management is done using GSM sensors, and the aim is to use LPWAN to reduce the costs, improve range and reduce provisioning times when changing the communications provider. After an initial study, LoRa was selected as the LPWAN of choice for the trials. The study is composed of multiple use cases at different distances, types of recycling waste containers, placements (underground and surface) and different kinds of waste level measurement LoRa sensors, deployed in order to assess the impact of the different use cases on the LoRa sensor usage. The results shown that the underground waste containers present the most difficult challenge, where the container itself imposes attenuation levels of 26dB on the link budget. The results promoted the deployment of a city wide LoRa network available to all departments inside the Lisbon City Council, and considering the network capacity the network, the network is also available to citizens to be used freely.

This work presents an analytical methodology to predict meat juiciness (discriminant semi-quantitative analysis using groups of intervals of intramuscular fat) and intramuscular fat (regression analysis) in Longissimus thoracis et lumborum (LTL) muscle of Bísaro pigs using as independent variables the animal carcass weight and parameters from color and image analysis. These are non-invasive and non-destructive techniques which allow development of rapid, easy and inexpensive methodologies to evaluate pork meat quality in a slaughterhouse. The proposed predictive supervised multivariate models were non-linear. Discriminant mixture analysis to evaluate meat juiciness by classified samples into three groups—0.6 to 1.1%; 1.25 to 1.5%; and, greater than 1.5%. The obtained model allowed 100% of correct classifications (92% in cross-validation with seven-folds with five repetitions). Polynomial support vector machine regression to determine the intramuscular fat presented R2 and RMSE values of 0.88 and 0.12, respectively in cross-validation with seven-folds with five repetitions. This quantitative model (model’s polynomial kernel optimized to degree of three with a scale factor of 0.1 and a cost value of one) presented R2 and RSE values of 0.999 and 0.04, respectively. The overall predictive results demonstrated the relevance of photographic image and color measurements of the muscle to evaluate the intramuscular fat, rarther than the usual time-consuming and expensive chemical analysis.

Artificial Intelligence (AI) is an automation mechanism that runs in a computer system performing tasks that normally require human intelligence, such as visual perception, speech recognition, decision making or translation [1]. Some authors argue that recent developments in AI are leading to a wave of innovation in organizational design and changes to institutionalized norms of the workplace [2]. Techno-optimists even named this present phase the ‘second machine age’, arguing that it now involves the substitution of the human brain (Brynjolfsson and McAfee 2014). Potentially, the ability to apply AI in a generalized way can produce significant technical, economic and social effects in firms. But how many of these AI applications are ready and how far can they be from reaching the manufacturing industry market? The paper will answer the question: what are the implications on industrial productivity and employment in the automotive sector with the recent automation trends in Portugal? We will focus on AI as the most relevant emergent technology to understand the development of automation in areas related to robotics, software, and data communications in Europe (Moniz 2018). R&D investments in industrial processes in general may reflect productivity improvements derived from the increased automation process. Our results will be based on case studies from the automotive and components sector combined with database search by keywords that signal intelligence automation developments and AI applications selected from national R&D projects (on robotics, machine learning, collaborative tools, human-machine interaction, autonomous systems, etc) supported by European structural funds. The implications on industrial productivity and employment will be discussed in relation to automation trends in the automotive sector.

With the recent advances in science and technology, more processing capability and data have become available, allowing a more straightforward implementation of data analysis techniques. Fortunately, the available online data storage capacity follows this trend, and vast amounts of data can be stored online freely or at accessible costs. As happens with every evolution (or revolution) in any science field, organizing and sharing this data is essential to contribute to new studies or validate the obtained results quickly. To facilitate this, we must guarantee interoperability between the existing datasets and the developed software, whether commercial or open source. This article explores this issue, analyzing the current initiatives to establish data standards and comparing some of the existing dataset online storage platforms. Through a Strengths, Weaknesses, Opportunities, and Threats (SWOT) analysis, it is possible to understand better the strategy that should be taken to improve the efficiency in this field, which directly depends on the data characteristics.

It is known for decades that viruses from the Coronoviridae family can adapt to human-to-human transmission. In 2020, SARS-CoV-2 caused a global pandemic of unprecedented scale imposing the loss of millions of human lives and being at the heart of a global economic crisis. Thus, we overviewed key research advances generated from the identification of the etiological agent to a better understanding of its origin, evolution and factors underlying global spread. Furthermore, we analyze the scientific productivity using the PubMed database. We found that the total number of publications increased more than 8% in 2020 when compared with 2019 or the average publications per year in the previous quinquennial. Remarkably, 86,638 publications related with COVID-19 and SARS-CoV-2 were published in 2020. Furthermore, there was also an increase in 2020 of publications in other major infectious diseases, such as AIDS, tuberculosis, or malaria. This success is likely the result from the vigorous, international, collaborative, and multidisciplinary response by the research community. During 2020 it was demonstrated, that with adequate support, it is possible to boost the rate of scientific progress in infectious diseases. Sustained investment in science will be key to address existing and future pandemics as the human population increases.

This paper presents a review on numerical and experimental methods to predict fracture of ad-vanced high strength steels (AHSS). AHSS are widely processed through sheet metal forming processes. Although being an excellent choice when lightweight, high strength and ductility are critical factors, their multi-phase microstructure accentuates forming challenges. To accurately model forming behavior, necking based failure criteria as well as direct fracture models require improvements. As a necking based failure model, the conventional forming limit diagram/curve (FLD/FLC) presents limitations such as in estimating direct fracture (surface cracks, edge cracks, shear cracks), as well as deformation histories under nonlinear strain paths. Thus, significant re-search efforts are being made towards the needs of advanced fracture constitutive models capa-ble of predicting fracture scenarios without necking, more frequently observed in the realm of AHSS. Scientific community research is divided into several directions aiming at improving the forming and fracture behavior accuracy of parts subjected to sheet metal forming operations. In this review paper, a comprehensive overview on ductile fracture modeling is presented. Firstly, the FLD/FLC limitations modeling fracture behavior in sheet metal forming operations are stud-ied. Followed by the recent trends in constitutive material modeling. Afterwards, material char-acterization methods advancements to cover a broad range of stress states are comprised. Final-ly, damage and fracture models predicting failure in AHSS are investigated. This review paper supplies relevant information on the current issues the sheet metal forming community is chal-lenged with due to the trend towards AHSS employment in the automotive industry.

Sensors available on mobile devices allow the automatic identification of Activities of Daily Living (ADL). This paper describes an approach for the creation of a framework for the identification of ADL, taking in account several concepts, including data acquisition, data processing, data fusion, pattern recognition, and machine learning. These concepts can be mapped in a module of the framework, including the use and creation of several algorithms. For the development of a framework that works in several conditions, e.g., without Internet connection, these algorithms should take in account the hardware and software limitations of the mobile devices to run all main tasks locally. The main purpose of this paper is related to the presentation the sensors, algorithms, and architecture of the proposed approach.

The molecular evolution of medulloblastoma is more complex than was previously imagined as emerging evidence suggests that multiples interactions between the tumor cells and components of the tumor microenvironment (TME) are important for tumor promotion and progression. The identification of several molecular networks within the TME, which interact with tumoral cells, has provided new clues to understand the tumorigenic roles of many TME components as well as potential therapeutic targets. In this review, we discuss the most recent studies regarding the roles of astrocytes in supporting the sonic hedgehog (SHH)–activated medulloblastoma molecular subgroup, and provide an overview of medulloblastoma progression through SHH expression and signal transduction mechanisms into the complex tumor microenvironment. In addition, we highlight the associations between tumor and stromal cells as possible prognostic markers and new therapeutic strategies.

Academic publishing is undergoing a highly transformative process, and many rules and value systems that were in place for years are being challenged in unprecedented forms leading to the evolution of novel ways of dealing with new pressures. One of the most important aspects of an integrated and valid academic literature is the ability to screen publications for errors during peer review to weed out mistakes, fraud and inconsistencies, such that the final published product represents a product that has value, intellectually, and otherwise. It is difficult to claim the existence of perfect manuscripts. The level of errors that exist in a manuscript will depend on the rigor of the research group and of the peer review process that was used to screen that paper. When errors slip into a final published paper, either through honest error or misconduct, and are not detected during peer review and editorial screening, but are spotted during post-publication peer review, an opportunity is created to set the record straight, and to correct it. To date, the most common forms of correcting the literature have been errata, corrigenda, expressions of concern, and retractions. Despite this range of corrective measures, which represent artificially created corrals around pockets of imperfect literature, certain cases do not quite fit this mold, and new suggested measures for correcting the literature have been proposed, including manuscript versioning, amendments, partial retractions and retract and replace. In this commentary, a discussion of the evolving correction of the literature is provided, as are perspectives of the risks and benefits of such new measures to improve it.

Maritime ports represent an important ecosystem for pollutant emissions and, taking into account the ongoing energy transition, need to adopt new solutions to mitigate current emission levels. These emissions are partially avoidable if ships and vessels docked at the port use electric energy to feed their internal power needs instead of using their internal combustion engines. In Europe, there is an ongoing discussion on including such emissions in the European Emissions Trading System which will represent added costs for maritime operators. Onshore Power Supply systems can contribute to the ongoing energy transition by allowing the use of electric power to feed docked ships. As a first step to contribute to the development of Onshore Power Supply solutions, it is necessary to evaluate the added power needs that these systems would represent for the port. This paper presents a methodology that allows port operators to verify, straightforwardly and transparently, their power needs for Onshore Power Supply applications. The methodology is based on the historical data of docked ships at the port or quay level and provides an energy analysis of each type of vessel to determine the power to be installed at the port so that it is possible to supply energy to different types of ships and vessels simultaneously. Additionally, the implemented methodology provides economic and technical decision support factors by comparing the fuel costs with electric power costs, assessing the potential for this transition to Onshore Power Supply. The methodology is validated using a real case study for the port of Lisbon and obtained results demonstrate the potential for the installation of Onshore Power Supply in medium to large-dimension maritime ports.

The application of machine learning techniques to satellite imagery has been the subject of interest in recent years. The increase in quality and quantity of images, made available by Earth observation programs, such as the Copernicus program, led to the generation of large amounts of data. Among the various applications of this data is the creation of land cover maps. The present work aimed to create machine learning models capable of accurately segment and classify satellite images, to automatically generate a land cover map of the Portuguese territory. Several experiments were carried out with the spectral bands of the Sentinel-2 satellite, with vegetation indices, and with several sets of land cover classes. Three machine learning architectures were evaluated, which adopt two different techniques for image classification. One of the classification techniques follows an object-oriented approach, and in this case the architecture adopted in our models was a U-Net artificial neural network. The other classification technique is pixel-oriented, and the machine learning models tested were random forest and support vector machine. The overall accuracy of the results obtained ranged from 68.6% to 94.75%, depending strongly on the number of classes into which the land cover is classified. The result of 94.75% was obtained when classifying the land cover only into 5 classes. However, a very interesting accuracy of 92.37% was achieved by the model when trained to classify 8 classes. These results are superior to those reported in the related bibliography.

This paper provides a comparative study between microwave tomography and synthetic time-reversal imaging techniques as applied to ground penetrating radar (GPR) surveys. The comparison is carried out by processing experimental data collected at a controlled test site, with various types of buried targets at given subsurface depths and representative soil conditions. It is shown that the two techniques allow us to obtain complementary information about position, depth and size of the targets from a single GPR survey.

The study presented here, through the use of GIS and physical variables, generate a new meth-odology for the calculation of erosivity (Factor R) for the qualitative evaluation of soil loss po-tential (laminar erosion) in the Northwest margin of the municipality of São Francisco, mostly located in the Pardo-MG river basin. The results obtained were statistically correct when com-pared to the traditional R calculation and the laminar erosion methodology. It is worth noting that the new proposal presented here indicated sites of qualitative loss of soil in the same places where there are closed-loop satellite signals of degraded Cerrado, something not identified in the traditional model. As conclusion it can be said that the obtained results were extremely sat-isfactory, being advised more studies to verify this new method proposed here in more places beyond the study area elaborated here

This study involved a comprehensive examination of sensory attributes in Bísaro dry-cured loins, including odor, androsterone, scatol, color, fat color, hardness, juiciness, chewiness, flavor intensity, and flavor persistence. Analysis of 40 samples revealed a wide variation in these attributes, ensuring a robust margin for multivariate calibration purposes. The respective near-infrared (NIR) spectra unveil distinct peaks associated with significant components such as protein, lipid, and water. Support Vector Regression (SVR) models were methodically calibrated for all sensory attributes, with optimal results using multiplicative scattering correction pre-treatment, MinMax normalization, and radial base kernel (non-linear SVR model). The predictive models exhibited acceptable results, characterized by R-squared values close to 1 (0.9616 - 0.9955) and low RMSE values (0.0400 – 0.1031). The prediction set's relative standard deviation (RSD) remained under 5%. Comparisons with prior research revealed significant improvements in prediction accuracy, particularly when considering attributes like pig aroma, hardness, fat color, and flavor intensity. This research underscores the potential of advanced analytical techniques to improve the precision of sensory evaluations in food quality assessment.

The use of nitrogen fertilizers can be a source of environmental pollution; the use of or-ganomineral fertilizers can become a nutritional source for crops, ensuring sustainability in the production system. Another alternative approach is through the inoculation and co-inoculation of microorganisms. The objective was to evaluate the development, nutrition, and agronomic yield of common bean through fertilization with organomineral formula "FMO" derived from sewage sludge biosolids, combined with Rhizobium tropici inoculation and co-inoculation with Azospirillum brasilense techniques. Three bean cultivars from different commercial groups, Pérola, BRS Esteio, and BRS Pitanga, were tested. They were subjected to organomineral fertilizer application, orga-nomineral fertilizer application combined with seed inoculation with R. tropici and re-inoculation; seed co-inoculation with R. tropici + A. brasilense prior to sowing, and foliar re-inoculation with R. tropici + A. brasilense. Seed inoculation, combined with foliar re-inoculation at the V4 stage, resulted in higher productivity of common bean. The combination of R. tropici with co-inoculation with A. brasilense generally led to increased productivity compared to mineral nitrogen fertilization. The use of organomineral fertilizer alone enabled gains in development, as well as productivity. The Pérola bean cultivar showed better adaptation to the applied treatments.

With the latest advances in information and communication technologies, greater amounts of sensitive user and corporate information are constantly shared across the network making it susceptible to an attack that can compromise data confidentiality, integrity and availability. Intrusion Detection Systems (IDS) are important security mechanisms that can perform a timely detection of malicious events through the inspection of network traffic or host-based logs. Throughout the years, many machine learning techniques have proven to be successful at conducting anomaly detection but only a few considered the sequential nature of data. This work proposes a sequential approach and evaluates the performance of a Random Forest (RF), a Multi-Layer Perceptron (MLP) and a Long-Short Term Memory (LSTM) on the CIDDS-001 dataset. The resulting performance measures of this particular approach are compared with the ones obtained from a more traditional one, that only considers individual flow information, in order to determine which methodology best suits the concerned scenario. The experimental outcomes lead to believe that anomaly detection can be better addressed from a sequential perspective and that the LSTM is a very reliable model for acquiring sequential patterns in network traffic data, achieving an accuracy of 99.94% and a f1-score of 91.66%.

Climate change is an important threat to orchard production at Mediterranean basin. Diversification seems to be implemented at a farm level as an important strategy to face these challenges. This paper aims to analyse farmer’s perceptions on crop diversification as a way to enhance farm’s adaptive capacity in a context of current and future climate changes impacts. Our case study is focused in orchards growers from French department of Vaucluse recently diversifying their activities through pistachio (Pistacia vera L.). We did in-depth semi-structured farmers’ interviews in 2021. The results show that diversification is supposed to enhance 3 main components of farms adaptative capacity: (1) strengthening robustness through improvement of buffering capacities to climate impacts (trough robust and adapted plants), economic uncertainties (by exploring local/niche markets) and labour scarcity (by lowering workforce requirements and mechanization); (2) Learning by experimenting, monitoring and exchanging with pairs and advisors (3) Cope with change related with societal demands and helps to increase personal satisfaction. Finally, promote farm’s diversification can contribute to enhance farm’s adaptive capacity under climate change impacts.

Institutional sustainability is a dynamic and multifaceted concept that relies on the contributions of various institutions, including the legal and the scientific system. On the other side, consumers boycotts are an expression of political consumerism by which consumers can use their market power to attain sustainability objectives. This article explores institutional trust on the legal system and trust on scientists as potential drivers for consumers’ boycotts. Using data retrieved from the European Social Survey covering twenty-five countries, the study employs binary logistic regression to assess the importance of institutional trust and other potential drivers of product boycotts in Europe. Results confirm that boycotting behaviour is affected by institutional trust, as well as other individual variables including gender, age and life-cycle effects, education, interest in politics and level of satisfaction with the political system, generalized trust, personal well-being, and consumers’ use and perceptions of information and communication technologies. The results of this study enrich the literature on consumer boycotts and have implications for policymakers involved in sustainability initiatives.

LoRa and its upper layers definition LoRaWAN is one of the most promising LPWAN technologies for implementing the Internet of Things (IoT). Although being a popular technology, several works in the literature have revealed various weaknesses regarding the security of LoRaWAN v1.0 (the official 1st draft). By using all these recommendations from the academia and industry, the LoRa-Alliance has worked on the v1.0 to develop an enhanced version and provide more secure and trustable architecture. The result of these efforts ended-up with LoRaWAN v1.1, which was released on Oct 11, 2017. This manuscript aims at demystifying the security aspects and provide a comprehensive Security Risk Analysis related to latest version of LoRaWAN. Besides, it provides several remedies to the recognized vulnerabilities. To the best of authors’ knowledge, this work is one of its first kind by providing a detailed security analysis related to latest version of LoRaWAN. According to our analysis, end-device physical capture, rogue gateway and replay attacks are found to be threating for safety operation of the network. Eventually, v1.1 of LoRaWAN is found to be less vulnerable to attacks compared to v1.0, yet possesses several security implications that need to be addressed and fixed for the upcoming releases.

Osteomyelitis is a significant cause of total carcass condemnation in pigs at the slaughterhouse. The decision for total condemnation of a pig carcass for osteomyelitis is often based on traditional perceptions of the risk of pyemia, leading to controversy among Official Veterinarians (OV) in the industry. This review aims to provide a more comprehensive understanding of the etiopatho-genesis of osteomyelitis in pigs, the microorganisms involved, and the risk factors. It also high-lights the urgent need for a more uniform method to evaluate osteomyelitis cases, which could significantly reduce economic losses in the industry. Lesions originating from tail-biting, tail docking, castration, teeth resection, and raw management are described as risk factors for oste-omyelitis. Osteomyelitis is caused by the entry of pathogens into the bloodstream of the animal through an open wound. The most described pathogens are Trueperella monocytogenes, Staphylo-coccus aureus, and Streptococcus spp. At slaughter, OVs condemn carcasses with osteomyelitis due to pyemia. Signs of acute disease are essential to identify pyemia cases. In chronic cases, total carcass condemnation can be avoided depending on the number of lesions and number of vertebrae af-fected. A clear overall image of the problem would help authorities in various countries adopt a more homogenous approach.

Cork oak mortality has reached alarming proportions in the last decades, exacerbated by climate change. Understanding this phenomenon is crucial in finding mitigation or adaptation strategies. This study conducts a diachronic analysis of cork oak mortality over 10 years using GIS tools, focusing on Portugal's Tagus Lezíria region. Topographic, edaphic and climatic variables were employed to create maps of edaphoclimatic aptitude for cork oaks. Dead trees were identified using remote sensing techniques and crown coverage was determined to calculate the mortality index. The diachronic analysis aimed to explore climate change effects on cork oak mortality. A decrease in precipitation was observed, significantly impacting stands with canopy cover below 40%. Furthermore, a negative effect of solar radiation identified only in stands with canopy cover of 40% suggested its role in cork oak decline. This study introduces a novel perspective, highlighting the protective effect of denser canopy cover (above 40%) against excessive solar radiation and the impact of reduced precipitation. The integrated and diachronic approach provides valuable information for adapting management strategies to climate change challenges.

The increasing social pressure for decarbonization has placed businesses under considerable scrutiny to actively reduce carbon emissions. A critical step towards achieving this objective is to shift conventional production and consumption systems to more sustainable alternatives. Thus, there is the emergent need to understand the patterns and drivers of the transformative business models (BMs) that underpin that shift. This study adopts a mixed-methods approach that integrates different literature streams--including Sustainability Transitions Theory (STT), Strategic Niche Management (SNM), and the Business Models approach--and stakeholders’ interviews to investigate the key elements of business models that lead towards sustainable practices. This research examines the organizational arrangements of European start-ups operating between 2014 and 2020. The transformation towards decarbonized production and consumption is characterized by efficient combination of business strategies that incorporate advanced technologies (ATs), such as artificial intelligence (AI), machine learning (ML) and its algorithms, along with sustainable elements, resulting in transformative business models. By exploring the driving elements behind the transition to low-carbon approaches, this study fills a significant gap in the existing literature on business models. The findings from this research also hold relevance for policymakers to promote decarbonization.

TomoSim comes as part of project ATMOS, a miniaturised DOAS tomographic atmospheric evaluation device, designed to fit a small drone. During the development of the project, it became necessary to write a simulation tool for system validation. TomoSim is the answer to this problem. The software has two main goals: to mathematically validate the tomographic acquisition method; and to allow some adjustments to the system before reaching final product stages. This measurement strategy was based on a drone performing a sequential trajectory and gathering projections arranged in fan beams, before using some classical tomographic methods to reconstruct a spectral image. The team tested three different reconstruction algorithms, all of which were able to produce an image, validating the team’s initial assumptions regarding the trajectory and acquisition strategy. All algorithms were assessed on their computational performance and their ability for reconstructing spectral "images", using two phantoms, one of which custom made for this purpose. In the end, the team was also able to uncover certain limitations of the TomoSim approach that should be addressed before the final stages of the system.

In this research paper we describe the development phase of a low-cost LoRa IoT solution applied to a kindergarten school with three years results. A set of sensors solution was developed in a LoRa communication board, battery powered, providing a simplified setup process. These sensors were used in order to measure temperature, humidity, luminosity, air quality and presence. Also, energy monitor solutions were integrated. The acquired data is transmitted and analysed for knowledge extraction, identifying savings and other related KPIs. From data, automatic saving actions were performed towards heating and cooling systems, lighting and a set of if-then actions were developed for automatic cost-saving actions, based on infrared signals to heating/cooling systems using some procedure of external command devices. This approach avoids the usage of proprietary vendor solutions in a flexible approach that can easily be deployed to any building facility. This is an important achievement since most of the building consumption is based on heating and cooling systems. In a three years test of the solution, the total energy consumption savings surpassed 20%

Obesity is one of the most prevalent and damaging metabolic conditions and is a risk factor for the development of other disorders that define the metabolic syndrome. Recent studies have identified a significant role of AGE accumulation and RAGE signaling pathways in the underlying mechanisms that cause the chronic inflammatory response present in obesity which, ultimately, leads to adipose tissue dysfunction. Given the current interest and increasing evidence on possible therapeutic opportunities in the AGE-RAGE axis, the purpose of this work is to review the key findings on new small molecules and bioactive compounds that act as AGE or RAGE inhibitors and their effects on metabolic parameters of people with obesity. The search queries were defined according to the following PICO question: “What are the effects of AGE-RAGE antagonism on adipose tissue metabolism and other metabolic parameters of people with obesity? “. Article search was performed in three online databases: PubMed, Scopus, and Web of Science. In the end, 20 studies were selected for this review. Overall, the reviewed molecules showed beneficial effects on body weight, glucose tolerance, insulin resistance, inflammatory profile, and adipose tissue metabolism in mice models with obesity. There are still very few studies on human application of these molecules, but the ones that were reviewed revealed controversial data when compared to animal studies. Therefore, further human clinical trials should be performed to retrieve more conclusive data.

The increased demand and use of autonomous vehicles and advanced driver-assistance systems has been constrained by an incidence of accidents involving errors with the perception layer’s functionality. In tandem, recent papers have noted the lack of standardized, independent testing formats and insufficient methods with which to analyze, verify and qualify LiDAR-based data and categorization. While camera-based approaches benefit from an ample amount of research, camera images can be unreliable in situations with impaired visibility such as dim lighting and fog. This paper aims to introduce a novel method based entirely on LiDAR data with the capability to detect anomalous patterns as well as complementing other performance evaluators using a Copula-based approach. With a promising set of preliminary results, this methodology may be used to evaluate an algorithm’s confidence score, the impact conditions may have on LiDAR data and detect cases in which LiDAR data may be insufficient or otherwise unusable.

Agricultural production needs technologies that assist the management of natural resources, for example, the collection of real-time data on soil, water, weather, crops, and biodiversity conditions. Sensor technology solutions and open-source software are appropriate for promoting more sustainable agricultural production. Among the advantages of using open-source technologies and software is its potential for extension, collaboration, customization, flexibility, maintenance cost, transparency, speed, and better security. Given the above, the objective of this research was to find, in different electronic databases, exclusively open-source software for precision agriculture, offering a systematic review, and addressing considerations and challenges. This survey considers up-to-date open-source software available in repositories such as GitHub and GitLab, to understand its characteristics and application formats.

Solid waste management is challenging in many countries, especially developing economies. The impacts of the pandemic continue to be felt and have indicated secondary impacts on waste management. This work draws on data on household solid waste (HSW), healthcare waste (HCW), and recyclables collected in the Rio de Janeiro municipality, analyzed from January 2018 to December 2022. As expected, the collection of HCW in Rio de Janeiro municipality experienced a noticeable increase in 2020 and 2021, with an average of 46.9 tons and 54.3 tons collected, respectively. Notably, 2021 saw a significant 30% increase compared to 2019 (p-value<0.001). No significant difference was observed in recyclables collected from 2018 to 2021. The average recyclable amount was 3,638 and 3,747 tons per month in 2020 and 2021. In contrast, the monthly amount was equal to 4,819.5 tons in 2022, representing an increase higher than 32% compared to previous years (p-value<0.05). Our findings can be used to adapt and improve waste systems to cope with similar emergency scenarios in the future, serving as a template for municipalities with similar challenges.

G‐quadruplexes (G4) are structures formed at the ends of the telomere, these are rich in guanines and were stabilized by molecules that bind to specific sites. TMPyP4 and Thymoquinone (TQ) are small molecules that bind to the G4, they have drawn attention because of their role as telomerase inhibitors. The aim of this study was to evaluate the effects of telomerase inhibitors on cellular proliferation, senescence, and death. Two cell lines LC‐HK2 (NSCLC) and RPE‐1 were treated with TMPyP4 (5μM) and TQ (10μM). Both inhibitors were effective in decreasing telomerase activity. TMPyP4 increased the percentage of cells with membrane damage associated with cell death and decreased the frequency of cells in the S‐phase. TMPyP4 changed the cell adhesion ability and modified the pattern of focal adhesion. TQ acted in a dose‐dependent manner, increasing the frequency of senescent cells, and inducing cell cycle arrest in the G1. In conclusion, the effects of both drugs on LC-HK2 and RPE-1 cell lines were different although both are telomerase inhibitors, because TMPyP4 decreased proteins of cell adhesion and TQ induces a decrease in cell viability.

Welded structures are subjected to internal residual stress after manufacturing that may affect the structural strength and normally are associated with an increase on initial geometrical imperfections. This study presents a simplified method to generate an adequate representation of residual stresses on Finite Element models for structural analysis of thin-walled structures and other applications. The results obtained shown that the methodology proposed to introduce residual stresses is simple, accurate and efficient on the modulation of post-welding stresses and their pattern, thus it may be used for simulation of the thermal process.

Low Power Wide Area Networks (LPWAN) enable a growing number of Internet-of-Things (IoT) applications with large geographical coverage, low bit-rate, and long lifetime requirements. LoRa (Long Range) is a well-known LPWAN technology that uses a proprietary Chirp Spread Spectrum (CSS) physical layer, while the upper layers are defined by an open standard - LoRaWAN. In this paper, we propose a simple yet effective method to improve the Quality-of-Service (QoS) of LoRa networks by fine-tuning specific radio parameters. Through a Mixed Integer Linear Programming (MILP) problem formulation, we find optimal settings for the Spreading Factor (SF) and Carrier Frequency (CF) radio parameters, considering the network traffic specifications as a whole, to improve the Data Extraction Rate (DER) and to reduce the packet collision rate and the energy consumption in LoRa networks. The effectiveness of the optimization procedure is demonstrated by simulations, using LoRaSim for different network scales. In relation to the traditional LoRa radio parameter assignment policies, our solution leads to an average increase of 6% in DER, and a number of collisions 13 times smaller. In comparison to networks with dynamic radio parameter assignment policies, there is an increase of 5%, 2.8%, and 2% of DER, and a number of collisions 11, 7.8 and 2.5 times smaller than equal-distribution, Tiurlikova's (SoTa), and random distribution, respectively. Regarding the network energy consumption metric, the proposed optimization obtained an average consumption similar to Tiurlikova's, and 2.8 times lower than the equal-distribution and random dynamic allocation policies. Furthermore, we approach the practical aspects of how to implement and integrate the optimization mechanism proposed in LoRa, guaranteeing backward compatibility with the standard protocol.

Considering the importance of assessing the impacts resulting from a sport career, this study aimed at developing and validating a semi-structure interview guide suitable for quantifying the socio-demographic and epidemiological profile of former professional football players. Based on the theoretical frameworks and several methodological procedures, an interview guide was de-veloped, consisting of 3 areas of conceptual organization (A1. Biographical data; A2. Career data; and A3. Post-Career Transition data) and 8 data collection categories (C1. Personal data; C2. Pro-fessional data; C3. Socio-demographic pathway in the post-career; epidemiological pathway; C4. Epidemiological pathway; C5. Moment of leaving the career; C6. Socio-demographic pathway in post-career; C7. Epidemiological pathway in the post-career; and C8. Perceptions on post-career planning). The construction and validation of the interview guide following 4 steps: Ad hoc con-struction of the interview guide (step 1); Review of the interview guide by a panel of experts (step 2); Definition of procedures and protocol for the application of the interview (step 3); Application of the pilot study for face validation of the interview guide (step 4). Thus, in procedural terms, four stages were considered for the construction and validation of the interview guide, namely the Ad hoc construction of the interview guide (i), the review of the in-terview guide by a panel of experts (ii), definition of procedures and protocol for the application of the interview (iii), and the application of the pilot study for the face validation of the interview guide (iv). The results showed that the interview guide for the study of the impacts of the sports careers on the quality of life of Portuguese former football players shows reliability for the collec-tion of qualitative and quantitative information from the respective content analysis. The use of the interview guide characterizes the path of former player, providing information and knowledge on the socio-demographic and epidemiological impact factors resulting from their post-career (sports retirement).

The diagnosis and the pathology of Myalgic Encephalomyelitis/Chronic Fatigue Syndrome (ME/CFS) remain under debate. However, there is a growing body of evidence for an autoimmune component in ME/CFS caused by the Epstein-Barr virus (EBV) and other viral infections. In this work, we took advantage of a large public dataset on the IgG antibodies to 3,054 EBV peptides to understand whether these immune responses could be used as putative biomarkers for disease diagnosis and triggers of pathological autoimmunity in ME/CFS patients using healthy controls (HCs) as a comparator cohort. We then aimed at predicting disease status of study participants using a Super Learner algorithm targeting an accuracy of 85% when splitting data into train and test datasets. When we compared data of all ME/CFS patients or data of a subgroup of these patients with non-infectious or unknown disease trigger to the dataset of HC, we could not find an antibody-based classifier that would meet the desired accuracy in the test dataset. In contrast, we could identify a 26-antibody classifier that could distinguish ME/CFS patients with an infectious disease trigger from HCs with 100% and 90% accuracies on the train and test sets, respectively. We finally performed a bioinformatic analysis of the EBV peptides associated with these 26 antibodies. We found no correlation between the importance metric of the selected antibodies in the classifier and the maximal sequence homology between human proteins and each EBV peptide recognized by these antibodies. In conclusion, these 26 antibodies against EBV have an effective potential for disease diagnosis of a subset of patients, but they are less likely to trigger pathological autoimmune responses that could explain the pathogenesis of ME/CFS.

Besides the Lagrangian and the Eulerian descriptions, the motion of a body can also be expressed relative to the present configuration of the body, known as the relative motion description. It is interesting to consider such a relative motion description in general to formulate the basic system of field equations for solid bodies. In doing so, when the time increment from the present state is small enough, the nonlinear constitutive equations can be linearized relative to the present state so that the resulting system becomes linear. This will be done for thermoelastic materials with a brief comment on the exploitation of entropy principle in general. Relative Lagrangian formulation is based on the well-known ``small-on-large'' idea, and can be implemented for solving problems with large deformation in successive incremental manner. Some applications of such a formulation in numerical simulations are briefly reviewed.

In this paper we investigate in different scenarios the feasibility of using massive multiple-input multiple-output (mMIMO) with Reconfigurable Intelligent Surfaces (RISs) to boost the throughput and coverage performances with high energy efficiency, considering sub-6 GHz, mmWave and THz bands. With that objective, a centralized radio access network (C-RAN) suitable for beyond fifth generation (B5G) systems is considered, where we integrate the base stations (BSs) with multiple RISs and devices or user equipment. RISs with a large number of quasi-passive reflecting elements constitute a low-cost approach capable of shaping the radio wave propagation and improve wireless connectivity. We consider a scenario where multiple RISs are combined with mMIMO in the uplink in order to provide connectivity to Smart City (thousands of active low power devices) wirelessly, in the 3.6GHz and 28GHz bands. We also address a scenario where RISs are adopted with mMIMO in the downlink so as to offer connectivity to a Stadium with Pitch, (thousands of active user equipment) in the 28GHz band. Finally, we have also studied the connectivity at 100GHz of a Factory where several RIS panels replacing most of the BSs equipped with mMIMO assure improved throughput and coverage. We concluded that RISs are capable of improving the performance in any of these analyzed scenarios at the different frequency bands, justifying that they are a key enabling technology for 6G.

(1) Background: Nursing homes’ preparedness in managing a public health crisis has been fragile, with effects on safety culture. The objective of this study was to assess nursing homes’ COVID-19 preparedness in Southern Portugal, including personnel’s work experiences during the pandemic. (2) Methods: We used a COVID-19 preparedness checklist to be completed by management teams, followed by follow-up calls to nursing homes. Thereafter, a survey to personnel was applied. Data analysis included descriptive statistics, exploratory factor analysis, and thematic analysis of open-end questions. (3) Results: In total, 71% (138/195) of eligible nursing homes returned the preparedness checklist. We conducted 83 follow-up calls and received 720 replies to the personnel survey. On average, 25% of nursing homes did not have an adequate decision-making structure to respond to the pandemic. Outbreak capacity and training were fragile areas among nursing homes’ contingency plans. We identified compliance with procedures and nonpunitive response to mistakes as fragile areas of safety culture, and teamwork as a strong safety area. (4) Conclusions: To strengthen how nursing homes cope with upcoming phases of the COVID-19 pandemic or future public health emergencies, nursing homes’ preparedness and safety culture should be fostered and closely monitored.

The main objective of this investigation was to study the effect of organizational competencies development practices on turnover intentions and whether affective commitment explains this relationship. Another of the study's objectives was to test whether these relationships vary ac-cording to the generation to which the participant belongs. The study sample consisted of 2123 participants working in Portuguese organizations. The results indicate that organizational com-petencies development practices (training, individualized support, and functional rotation) nega-tively and significantly affect turnover intentions and that affective commitment mediates this re-lationship. However, these relationships vary according to the participant's generation. For Gen-eration Y and Generation X, this mediating effect is found in all dimensions of organizational competencies development practices. For the baby boomer generation, there is only a mediating effect of affective commitment in the relationship between individualized support and turnover intentions. These results indicate that human resources should consider the generation to which the participant belongs when implementing competencies development practices.

Bimetallic (or multimetallic) catalysis has emerged as a powerful tool in modern chemical synthesis, offering improved reaction control and versatility. This review focuses on the recent de-velopments in bimetallic sequential catalysis for the synthesis of nitrogen heterocycles, essential building blocks in pharmaceuticals and fine chemicals. The cooperative action of two (and sometimes more) different metal catalysts enables intricate control over reaction pathways, enhancing selectivity and efficiency of N-heterocyclic compounds synthesis. By activating less reactive substrates, this multimetal catalytic strategy opens new synthetic possibilities for challenging compounds. The use of catalytic materials in bimetallic systems reduces waste and improves atom efficiency, aligning with green chemistry principles. With a diverse range of metal combinations and reaction conditions, bimetallic catalysis provides access to a broad array of N-heterocyclic compounds with various functionalities. This paper highlights the significant progress made in the past decade in this topic, emphasizing the promising potential of bimetallic catalysis in drug discovery and the fine chemical industries.

The use of Artificial Neural Networks (ANN) is a great contribution to medical studies since the application of forecasting concepts allows the analysis of future diseases propagations. In this context, this paper presents a study of the new coronavirus SARS-COV-2 with a focus on verifying the virus propagation associated with mitigation procedures and massive vaccination campaigns. There were proposed two methodologies to predict 28 days ahead the number of new cases, deaths, and ICU patients of five European countries: Portugal, France, Italy, United Kingdom, and Germany, and a case study of the results of massive immunization in Israel. The data input of cases, deaths, and daily ICU patients was normalized to reduce discrepant numbers due to the countries size, and the cumulative vaccination values by the percentage of population immunized, at least with one dose of vaccine. As a comparative criterion, the calculation of the mean absolute error (MAE) of all predictions presents the best methodology and targets other possibilities of use for the proposed method. The best architecture achieved a general MAE for the 1 to 28 days ahead forecast lower than 30 cases, 0,6 deaths and 2,5 ICU patients by million people.

Purpose: The goal of this article was to introduce a new technique for root coverage (RC), the Mixed-Thickness Tunnel access (MiTT), approaching a full-split design, showing the results obtained in a case series and demonstrating it step-by-step. Methods: Healthy individuals, non-smokers, and non-diabetics, who were diagnosed with gingival recession (GR) type 1 or 2 (RT1 or RT2). After all necessary evaluations, prophylaxis was performed 14 days before the surgical procedure. Then, after the basics clinical conduct and anesthesia, one or two vertical incision(s) on the mucosa (around 1-2 mm apical to the MGJ), lateral to the papilla base, were done. Initial detachment of the mucosa from the muscles (split design); it was permitted (but not mandatory) to do intrasulcular incisions; from the MGJ to coronal, subperiosteal access was done to raise the full-thickness tunnel. It must communicate up to the gingival sulcus area and the papilla’s base, keeping the papilla’s tip intact. A connective tissue graft was harvested, which was inserted through the linear incision or intrasulcularly. Interrupted sutures were done and may be used as adjunctive material. Results: Nine healthy individuals (7 females and 2 males) aged 19 and 43 years were enrolled. They were treated following the MiTT steps. There were four cases with a single GR, 2 patients with 2 teeth involved, and three with 3 or 4 GR. Seven cases were RT1 and two RT2. All RT1 cases achieved 100% RC, while the mean RC obtained for RT2 was around 80%. Conclusion: MiTT can be considered a more straightforward approach for minimally invasive surgical technique, which is a feasible option to treat RC with a high success rate, predictability, and esthetic preservation. There is a technical sensitivity to performing the full-split design procedure.

Introduction: Within primary ARDS, SARS-CoV-2-associated ARDS (C-ARDS) emerged in late 2019, reaching its peak during the subsequent two years. Recent efforts in ARDS research have concentrated on phenotyping this heterogeneous syndrome to enhance comprehension of its pathophysiology. Methods and Results: A retrospective study was conducted on C-ARDS patients from April 2020 to February 2021, encompassing 110 participants with a mean age of 63.2±11.92 (26-83 years). Of these, 61.2% (68) were male, and 25% (17) experienced severe ARDS, resulting in a mortality rate of 47.3% (52). Ventilation settings, arterial blood gases, and chest X-ray (CXR) were evaluated on the first day of invasive mechanical ventilation and between days two and three. CXR images were scrutinized using a convolutional neural network (CNN). A binary logistic regression model for predicting C-ARDS mortality was developed based on the most influential variables: age, PaO2/FiO2 ratio (P/F) on days one and three, CNN-extracted CXR features, and age. Initial performance assessment on test data (23 patients out of the 110) revealed an area under the receiver operating characteristic (ROC) curve of 0.862 CI (0.654-0.969). Conclusion: Integrating data available in all intensive care units enables the prediction of C-ARDS mortality by utilizing evolving P/F ratios and CXR. This approach can assist in tailoring treatment plans and initiating early discussions to escalate care and extracorporeal life support. Machine learning algorithms for imaging classification can uncover otherwise inaccessible patterns, potentially evolving into another form of ARDS phenotyping. The combined features of these algorithms and clinical variables demonstrate superior performance compared to either element alone.

Health and wellness tourism should be particularly valued in the post-pandemic phase, as a stra-tegic product to enhance the population's well-being and quality of life indicators, at social, phys-ical, and environmental dimensions, with different proposals for specialized experiences that complement the destination's offer, positioning regions as health and wellness destinations. Thermal tourism should be encouraged, as a specific product, due to the innovation and diversi-fication observed in the services made available and the benefits recognized at different age levels of tourists and destinations communities. Considering the relevance of thermal springs and thermal tourists for tourism destinations image, positioning, and development, this research aims to identify the specific motivations of tourists to the practice of thermal tourism, to understand how the benefits that thermal tourists search for, and their sociodemographic profile influence the motivations, and how the motivations determine the travel characteristics. This research was de-veloped on the North and Centre of Portugal, for their relevance in the context of thermal springs and related tourism activities. To achieve the research objectives, a questionnaire survey was ap-plied to thermal tourists, through a non-probability by convenience sampling, using bivariate tests, such as Pearson’s chi-squared test, one-way ANOVA, and t-student. The results highlight that most respondents practiced thermal tourism due to leisure and relaxation benefits, such as the escape from daily stress, spend time with family, and being "pampered"; relaxation is the most valued motivation, followed by the search for psychological and physical wellbeing. The research found relations between the benefits expected by thermal tourists, and their travel characteristics such as the composition of the group, the general travel motivation, the thermal destination cho-sen, and the number of nights spent. In thermal tourism, new challenges emerge, demanding the development of strategies, products, and services responding to the needs of specific market segments.

This study was conducted to determine the effect of different types of olive cake (five treatments) in the diet of Bísaro pigs on the volatile compounds and sensory characteristics in the dry-cured loin and dry-cured “cachaço” (2 processed meat products). The treatments applied are based on the type of extraction and this may imply differences in their water and fat content. Eighty com-pounds were identified, and grouped into eight chemical classes: hydrocarbons, aldehydes, es-ters, alcohols, ketones, acids, furans, and other compounds. Aldehydes and alcohols were the ma-jor groups of compounds, representing 57.06-66.07 % and 68.67-75.61 % for the loin and “cacha-ço”, respectively. There were no significant differences between treatments for any of the volatile compounds identified. The major aldehydes were hexanal, heptanal, pentanal, and propanal. These compounds were significantly higher (p<0.001) in “cachaço”. This significant difference be-tween the two types of dry-cured products is directly related to the amount of total fat content. The major alcohols were 2.3-butanediol, 1-octen-3-ol, 1-butanol, 3-methyl, 1-hexanol, benzyl-alcohol and glycidol. Except for compounds 2,3-butanediol and benzyl-alcohol, the majority in this group are significantly different in terms of the type of dry-cured product. As for the sensory evaluation, for both dry-cured products, the trained tasters did not detect significant differences between the different treatments, which is in line with the results obtained for volatile compounds.

Rapid developments in the field of underwater photogrammetry have given scientists1the ability to produce accurate 3-dimensional (3D) models which are now increasingly used in the representation and study of local areas of interest. This paper addresses the lack of systematic analysis of 3D reconstruction and navigation fusion strategies, as well as associated error evaluation of models produced at larger scales in GPS-denied environments using a monocular camera (often in deep-sea scenarios). Based on our prior work on automatic scale estimation of Structure from Motion (SfM)-based 3D models using laser scalers, an automatic scale accuracy framework is presented. The confidence level for each of the scale error estimates is independently assessed through the propagation of the uncertainties associated with image features and laser spot detections using a Monte Carlo simulation. The number of iterations used in the simulation was validated through the analysis of the final estimate behaviour. To facilitate the detection and uncertainty estimation of even greatly attenuated laser beams, an automatic laser spot detection method, mitigating the effects of scene texture, was developed, with the main novelty of estimating the uncertainties based on the recovered characteristic shapes of laser spots with radially decreasing1 intensities. The effects of four different reconstruction strategies resulting from the combinations of Incremental/GlobalSfM, and thea priori/a posterioriuse of navigation data were analyzed using two distinct survey scenarios captured during the SUBSAINTES 2017 cruise (doi: 10.17600/17001000). The study demonstrates that surveys with multiple overlaps of non-sequential images result in a nearly identical solution regardless of the strategy (SfM or navigation fusion), while surveys with weakly connected sequentially acquired images are prone to produce broad-scale deformation (doming effect) when navigation is not included in the optimization. Thus the scenarios with complex survey patterns substantially benefit from using multi-objective BA navigation fusion. In all cases, the errors in the models are inferior to 5%, with errors often being around 1%. The effects of combining data from multiple surveys were also evaluated. The introduction of additional vectors in the optimization of multi-survey problems successfully accounted for offset changes present in the underwater USBL-based navigation data and thus minimize the effect of contradicting navigation priors. Our results also illustrate the importance of collecting a multitude of evaluation data at different locations and moments during the survey.

The effects of the solvent used for the active layer materials of an OLED based on TADF emitters plays a fundamental role in solution-deposited devices. This work focuses the effects on the performance of different solvents employed to fabricate a very simple two organic layer OLED based on a green TADF emitter, under the concept of host:guest matrix. From the different results of the main figures of merit, it was possible to conclude that the OLED that used toluene as solvent for the active layer reached a maximum EQE of 14%, almost the maximum already obtained for this emitter in more complex device structures. With the analysis of the charge transport processes, it was possible to establish an explanatory model for the obtained results. Through impedance spectroscopy, additional characterization about the nature of charge transport processes was carried out. With these results, it was possible to corelate the relaxation times, with the electrical properties of the active layer, and infer about the interaction between the electrical charges and the defect levels opening new possibilities to further development in the printed OLEDs.

The microorganisms able of accumulating lipids in high percentages, known as oleaginous microorganisms, have been widely studied as an alternative for producing oleochemicals and biofuels. Microbial lipid, so called Single Cell Oil (SCO), production depends on several growth parameters, including the nature of the carbon substrate, which must be efficiently taken up and converted into storage lipid. Οn the other hand, substrates considered for large scale applications must be abundant and of low acquisition cost. Among others, lignocellulosic biomass is a promising renewable substrate containing high percentages of assimilable sugars (hexoses and pentoses). However, it is also highly recalcitrant and therefore it requires specific pretreatments in order to release its assimilable components. The main drawback of lignocellulose pretreatment is the generation of several by-products that can inhibit the microbial metabolism. In this review, we discuss the main aspects related to the cultivation of oleaginous microorganisms using lignocellulosic biomass as substrate, hoping to contribute to the development of a sustainable process for SCO production in the near future.

The non-existence of a land ownership database in most of the developing countries moves the inhabitants to the occupation of public lands. Some of this situation are the origin to areas of informal housing, commerce and agriculture and in the end into new ​​informal settlements. Informal settlements become a serious problem in developing countries. The most common typology of informal settlements is that they are the population settled in public lands without any infrastructures and against the administrator's will. Thought this action the result in an uncontrolled land occupation process that promotes new informal areas without any proper built-up utilities, located in risk areas on the territory, barely ensuring the minimum requirements for a heaty living of the population and in various cases incentives to an informal economy. The process of build a cadastral map in informal settlement areas is a fundamental base to support the future transformation of illegal areas and to regulate the occupation of new subdivision planning and into the creation of new expansion areas. In this paper, it is presented a methodology developed to be applied to support a new register of land and to management. The transformation of informal settlement areas. The model to register the land tenure has been associated with allows the process application to multiple typology of informal settlements. The model to register land tenure has developed on a series of qualitative and quantitative data that determine the identification and classification of the buildings and its physical and functional description. The model was developed using Geographic Information System and with an initial survey of existing land titles of possession and public proposals to develop new expansion areas. A case study of the method is presented, where the land management model was implemented - Chã da Caldeiras in Ilha do Fogo an informal settlement in Cape Verde. The results are a great acceptance of the proposal by the population and local authorities and the starting of the implementation phase.

In the Northeast of Portugal, like in many parts of the world, most soils are acidic, which may hamper crop productivity. This study presents the findings of a factorial experiment involving three factors: i) soil type [schist (Sch) and granite (Gra)]; ii) cultivars [Cobrançosa (Cob) and Arbequina (Arb)]; and iii) fertilizer treatments [liming (CaCO3) plus Mg (LMg), P application (+P), B application (+B), all fertilizing materials combined (Con+), and an untreated control (Con-)]. Dry matter yield (DMY) did not show significant differences between cultivars, but plants grown in schist soil exhibited significantly higher biomass compared to those in granite soil. Among the treatments, +B and Con+ resulted in the highest DMY (50.8 and 47.2 g pot-1, respectively), followed by +P (34.3 g pot-1) and Con- (28.6 g pot-1). Treatment LMg yielded significantly lower values (15.6 g pot-1) than Con-. LMg raised the pH above 7 (7.36), leading to a severe B deficiency. Although Con+ also raised the pH above 7 (7.48), it ranked among the most productive treatments for providing B. Therefore, when applying lime to B-poor sandy soils, moderate rates are advised to avoid inducing a B deficiency. Additionally, it seems prudent to apply B after lime application.

Effective waste elimination is critical for the success of construction projects. Although several studies have focused on various aspects of construction waste, limited efforts have investigated the dynamic effect of Making-Do (MD) practices on productivity, rework, defects, and materials wastage. From a lean construction perspective, this study aims to address MD waste using the Last Planner System (LPS) and BIM. First, the casual structure that can cause MD in construction projects was expressed in a casual loop diagram (CLD), and thematic analysis uncovered the strategies of LPS-BIM to eliminate MD identified by reviewing the literature. Secondly, twenty-five strategies from the LPS and BIM strategies to address MD using Structural Equation Modeling (SEM) were assessed. Subsequently, a system dynamics model (SDM) for investigating LPS-BIM strategies on MD decisions in a construction project was formulated based on the underlying causal loop diagrams and the mathematical relations among the variables. Finally, the model was applied to three projects, and simulations for four LPS-BIM scenarios were carried out. The findings show that dynamic interactions among diverse production planning and control factors are critical in evaluating MD impacts on a construction project. The results demonstrate that the LPS-BIM approach resulted in an average 43.8% reduction in the tasks performed with MD, 45.3% of constraints, 66.5% of construction waste, increasing 13.7% completion rate, and 29.3% cost reduction, demonstrating that LPS-BIM as a more efficient solution for MD mitigation and construction planning.

Tributyltin (TBT) is an environmental contaminant present on all continents, including Antarctica, with a potent biocidal action. Its use began to be intensified during the 1970s, being effectively banned in 2003, but remaining in the environment to this day due to several factors that increase its half-life and misuse despite the bans. In addition to the endocrine disrupting effect of TBT, that may lead to imposex induction in some invertebrate species, there are several studies that demonstrated that TBT also has an immunotoxic effect. The immunotoxic effects that have been observed experimentally in vertebrates using in vitro and in vivo models involve different mechanisms, but mainly alterations in the expression and/or secretion of cytokines. In this review, we summarize and update the literature on the impacts of TBT on the immune system, as well as discuss what still needs to be done to fill the knowledge gaps regarding the impact of this endocrine disrupting-chemical on immune system homeostasis.

Mannosylerythritol lipids (MELs), one of the most promising biosurfactants (BS), are glycolipids produced by yeasts or fungi, with great environmental performance and a high compatibility with the human body. MELs besides working as typical surfactants, can form diverse structures when in the critical aggregation concentration (CAC), reducing the surface tension of water and other solutions, and being stable over a wide range of conditions. Among others, MELs present anti-microbial, antitumor, antioxidant and anti-inflammatory activity, skin and hair repair capacity, which opens possibilities for their use in applications from cosmetics and pharmaceutics to bio-remediation and agriculture. However, their market share is still low when compared to other glycolipids, due to their less developed production process and higher production cost. This re-view gathers information on the potential applications of MELs mentioned on the literature since 1993. Furthermore, it is also explored the current strategies being developed to enhance the market presence of MELs, in parallel with the ones developed for rhamnolipids and sophorolipids.

A 3D graphene foam made of interconnected multilayer graphene flakes was produced on optical fibres (OF) by laser-induced transformation of a polyimide (PI) film coated on the OF cladding. This material, known as la-ser-induced graphene (LIG), was explored in the electrochemical detection and quantification of dopamine (DA) at physiologically relevant concentrations in the presence of the most relevant interfering molecules in biological fluids, ascorbic acid (AA) and uric acid (UA). The measured limit of detection is 100 nM, the linear range is 0.1 to 5 μM and a maximum sensitivity of 5.0 µA µM−1 cm−2 was obtained for LIG decorated with Pt nanoparticles (NPs). Moreover, immunity to AA and UA interference and to fouling was attained by decorating the LIG elec-trode with Pt NPs and coating with Nafion. These figures of merit underlines the potential of these sensors for the quantification of physiologically relevant concentrations of DA in biological fluids, paving the way for the development of hybrid electrochemical/optical sensing actuating platforms in a lab-on-fibre configuration, with relevant applications in biomedical engineering. The advantages of this hybrid arrangement include the possi-bility of in-situ counterproofing, extended measuring ranges, photoelectrochemical detection and the probing of inaccessible places. This elegant approach can also provide a simple and cost-effective way to fabricate biomed-ical devices with extended functionality, such as medical optical probes with added electrochemical capabilities, optogenetics combined with local electrochemical detection, among others.

Regional heterogeneity of microglia was first described a century ago by Pio del Rio Hortega. Currently, new hints on microglia heterogeneity across central nervous system (CNS) regions are still being unraveled by high-throughput techniques. It remains unclear whether these spatial specificities translate into different microglial behaviors in vitro. We cultured microglia isolated from the cortex and spinal cord and analyzed the effect of the CNS spatial source on in vitro behavior by applying the same experimental protocol and culture conditions. We analyzed microglial cell numbers, function, and morphology and found a distinctive in vitro phenotype. We found that microglia were present in higher numbers in spinal cord-derived glial cultures, presenting different expression of inflammatory genes and a lower phagocytosis rate under basal conditions or after activation with LPS and IFN-. Morphologically, cortical microglial cells are more complex and present longer ramifications, which were also observed in vivo in CX3CR1+/GFP transgenic reporter mice. Collectively, our data demonstrated that microglial behavior in vitro is defined according to specific spatial characteristics acquired in the tissue. Thus, our study highlights the importance of microglia as a source of CNS for in vitro studies.

Background: Visceral leishmaniasis affects approximately 12 million people worldwide. Current existing drugs cause several side effects and resistance, the identification of new therapeutic targets for the development of new drugs is necessary. The vesicular trafficking in the parasite flagellar pocket is essential for parasite survival and proliferation, but little is known about the proteins involved in the endocytic/secretory pathways. In this work, we are describing the characterization of a transporter cargo protein SFT-2/Got-1 like in Leishmania infantum. Material and Methods: Using bioinformatics tools, the putative Got-1 protein A4HSK3 was characterized structurally and phylogenetically. Molecular biology was used to clone and express the protein and confocal fluorescence to determine its subcellular localization. Results: The Got-1 like protein presents four alpha helix TM conserved domains (aa38-aa147) characteristics of the Got-1/SFT-2 family proteins and an important Pen-2 conserved motif LGDYXXF located in the extracellular loop. Confocal microscopy suggests that Got-1/SFT-2 like is localized in the flagellar pocket, and is partially co-localized with the L. infantum presenilin-like protein. Phylogenetically, the Leishmania sp Got-1 like is contained in a subgroup of proteins clearly detached from the other Trypanosomatidae, such as T. cruzi and T. brucei. Conclusions: Our data show the presence of an important transported proteins, and its colocalization with the presenilin aspartyl protease in the flagellar pocket of the L. infantum open new perspectives to identify novel targets, which can be an alternative therapeutic strategy against leishmaniasis.

In a world where physical activity and social participation are fundamental pillars for a full, healthy, and quality life, confidence in walking emerges as a fundamental aspect to be assessed, especially in older adults. The purpose of this study was therefore to develop a Portuguese (Euro-pean) version, linguistically and psychometrically adapted, of the Ambulatory Self-Confidence Questionnaire (ASCQ); A translation method was used followed by an assessment of its validity and reliability. The Portuguese version was completed by 173 older adults. To assess reliability was used Cronbach’s Alpha and Intraclass Correlation Coefficients (ICC). For sociodemographic and clinical characterization, as well as for the questionnaire scoring was used descriptive statistical analysis. Pearson's correlation (r), Student´s t-test and ANOVA were used to analyse the criterion and con-struction validity; The Portuguese interactions of ASCQ was effectively translated and adjusted, revealing exceptional internal consistency and test-retest reliability, as reflected in Cronbach's alpha and ICC values of 0.95. No Floor Effect was observed, however, a Celling Effect was identified (3.5%). Criterion and construct validity were verified because all the correlations established were statistically significant; The adaptation of the ASCQ to Portuguese culture is adequate, making it valid for use within the Portuguese population of Portugal.

Evaluating mutation testing behavior can help decide whether refactoring successfully maintains the expected initial test results. Moreover, manually performing this analytical work is both time-consuming and prone to errors. This paper extends an approach to assess test code behavior and proposes a tool called MeteoR. This tool comprises an IDE plugin to detect issues that may arise during test code refactoring, reducing the effort required to perform evaluations. A preliminary assessment was conducted to validate the tool and ensure the proposed test code refactoring approach is adequate. By analyzing not only the mutation score but also the generated mutants in the pre- and post-refactoring process, results show that the approach is capable of checking whether the behavior of the mutants remains unchanged throughout the refactoring process. This proposal represents one more step toward the practice of test code refactoring. It can improve overall software quality, allowing developers and testers to safely refactor the test code in a scalable and automated way.

The article addresses the importance of nutrition in the health of the elderly population and focuses on the qualitative evaluation of menus provided by a social solidarity institution in Portugal, in order to prevent and/or treat malnutrition or the risk of malnutrition in this vulnerable population. The methodology involves the evaluation of four weekly menus, totalling 28 complete daily menus for the elderly, using the “Avaliação Qualitativa de Ementas para a População Idosa” (AQEDI) tool. The assessment grid is organized into six domains (general items, soup, protein suppliers, carbohydrate supplier side, vegetable side and dessert), each composed of various parameters. The results indicate that all menus were classified as "acceptable”, with percentages ranging from 60.73% to 68.84%, and suggests that while the menus are deemed acceptable, there is room for improvement. Recommendations include increasing the presence of eggs and including seasonal fruits daily, avoiding canned fruit. The study emphasizes the need for coordinated efforts within the institution to enhance menu planning, considering both nutritional guidelines and the sensory aspects of food. Coordination efforts within the institution are crucial for preserving positive aspects and addressing inadequacies in menu planning.

Thermal comfort is extremely important in architecture, especially in environments with more people spending longer on studies or intellectual activities. This research describes a case study to investigate university buildings' energy and thermal performance as a part of the ANEEL program. Due to this importance, and the need to save energy in Brazilian public buildings, the ANEEL-the Brazilian Energy Electricity Regulatory Agency, launched 2016 a national program focusing on energy efficiency in public universities around the country. University offices and classrooms require high intellectual effort; thus, environmental comfort is critical for maintaining its users' physical and mental health. This study included a pre-diagnosis of the performance of the envelope, lighting, and air conditioning systems and a survey about the quality of the environments from the users' point of view. The Prescriptive Method of the Brazilian Labeling Program (PBE) for Commercial, Service, and Public Buildings (RTQ-C) assessed the building performance. Statistical analysis was applied to correlate the quality and thermal preference of the users from the PMV/PPD. The results showed a high rate of thermal discomfort in both environments of the studies, even when using air conditioning.

In the context of Shared Autonomous Vehicles, the need to monitor the environment inside the car will be crucial. This article focuses on the application of deep learning algorithms to detect objects, namely lost/forgotten items to inform the passengers, and aggressive items to monitoring if violent actions may arise between passengers. For object detection algorithms was used public datasets (COCO and TAO) to train state-of-the-art algorithms, such as YOLOv5. For violent action detection was used the MoLa InCar dataset to train on state-of-the-art algorithms such as I3D, R(2+1)D, SlowFast, TSN and TSM. At the end an embedded automotive solution was used to demonstrate both methods running in real-time.

When a limb suffers a fracture, rupture, or dislocation, it is traditionally immobilized with plaster. This may induce discomfort in the patient, excessive itching and sweating, which creates the growth of bacteria, leading to an unhygienic and difficulty to keep clean from treatment. Furthermore, if the plaster remains for a long period, it may cause lesions in the joints and ligaments. To overcome all these disadvantages, orthoses have emerged as important medical devices to help patients in rehabilitation, as well as for self-care of deficiencies in clinics and daily life. Traditionally, these devices are produced manually, which becomes time-consuming and error prone. From another point-of-view, it is possible to use imageology (X-ray or computed tomography) to scan the human body; a process that may help orthoses manufacturing but induces radiation to the patient. To overcome this great disadvantage, several types of 3D scanners, without any kind of radiation have emerged. This article describes the use of various types of scanners capable of digitizing the human body, to produce custom orthoses. Studies have shown that photogrammetry is the most used and most suitable 3D scanner for the acquisition of the human body in 3D. With this evolution of technology, it is possible to decrease the scanning time and it will be possible to introduce this technology in clinical environment.

With the rising trends in elderly populations around the world, there is a growing interest in understanding how climate sensitivity is related to their thermal perception. Therefore, we analyzed the associations between mortality in the elderly due to cardiovascular (CVD) and respiratory diseases (RD) and meteorological variables, for three cities in the State of São Paulo, Brazil: Campos do Jordão, Ribeirão Preto and Santos, from 1996 to 2017. We applied the Autoregressive Model Integrated with Moving Average (ARIMA) and the Principal Component Analysis (PCA) in order to evaluate statistical associations. Results showed CVD as a major cause of mortality, particularly in the cold period, when a high mortality rate is also observed due to RD. The mortality rate was higher in Campos do Jordão and lower in Santos (and intermediate values in Ribeirão Preto). Campos do Jordão results indicate an increased probability of mortality from CVD and RD due to lower temperatures. In Ribeirão Preto, the lower relative humidity may be related to the increase in CVD and RD deaths. This study emphasizes that, even among subtropical climates, there are significant differences. Therefore, this can assist decision makers in the implementation of mitigating and adaptive measures.

The development in information technology has played an influential role in transforming the restaurant industry services. Therefore, this research’s main agenda is to investigate factors that motivate employees to adopt and continue using information technology services by integrating two famous information system (IS) theories, namely, task technology fit (TTF) and technology continuance theory (TCT). The extant integrative perspective model details the cause-effect relationship between technology adoption and continuance intention. The positivist paradigm forms the basis of this research design, and the approach followed is quantitative research. Using the stratified random sampling technique, the empirical data was collected from 417 restaurant industry employees in the US (United States) on a five-point Likert scale. The PLS-SEM technique was utilized to analyze data while using Smart PLS 3 because of its suitability and wider application currently in the hospitality sector. Results suggest that the recently developed integrated technology continuance research model has considerable influence on predicting pre- and post-adoption behavior with continuance intention for technology usage within the restaurant industry. All hypotheses were found significant except one for the direct association of hedonic motivation and continuance intention of technology adoption. Moreover, the results revealed that factors like perceived security & information privacy and assisting conditions were the most important factors in determining the usage of information technology with continuance intention. Unlike previous research studies that focus majorly only on issues before adoption of informational technology usage, the current focus on investigating continuance intention toward information technology usage by focusing on factors that can also boost post-adoption behavior and pre-adoption usage information technology.

This work aims to investigate systematically the influence of process temperature, bio-mass-to-water ratio, and production scales (laboratory and pilot) on the chemical composition of aqueous and gaseous phases and mass production of chemical by hydrothermal processing of Açaí (Euterpe Oleraceae, Mart.) seeds. The hydrothermal carbonization carried out at 175, 200, 225, and 250 °C, 2 °C/min, biomass-to-water ratio of 1:10, and at 250 °C, 2 °C/min, and biomass-to-water ratios of 1:10, 1:15, and 1:20, in technical scale, as well as at 200, 225, and 250 °C, 2 °C/min, bio-mass-to-water ratio of 1:10, in laboratory scale. The elemental composition (C, H, N, S) of solid phase determined to compute the HHV. The chemical composition of aqueous phase determined by GC and HPLC and the volumetric composition of gaseous phase by using an infrared gas an-alyzer. For the experiments in pilot scale with constant biomass-to-water ratio of 1:10, the yields of solid, liquid, and gaseous phases varied between 53.39 and 37.01% (wt.), 46.61 and 59.19% (wt.), and 0.00 and 3.80% (wt.), respectively. The yield of solids shows a smooth exponential de-cay with temperature, while that of liquid and gaseous phases a smooth growth. By varying the biomass-to-water ratios, the yields of solid, liquid, and gaseous reaction products varied be-tween 53.39 and 32.09% (wt.), 46.61 and 67.28% (wt.), and 0.00 and 0.634% (wt.), respectively. The yield of solids decreases exponentially with increasing water-to-biomass ratio and that of liquid phase increases in a sigmoid fashion. For constant biomass-to-water ratio, the concentrations of Furfural and HMF decrease drastically with increasing temperature, reaching a minimum at 250 °C, while that of phenols increases. In addition, the concentrations of CH3COOH and total car-boxylic acids increase, reaching a maximum at 250 °C. For constant process temperature, the concentrations of aromatics vary smoothly with the temperature. The concentrations of furfural, HMF, and cathecol decrease with temperature, while that of phenols increases. The concentra-tions of CH3COOH and total carboxylic acids decrease exponentially with temperature. Finally, for the experiments with varying water-to-biomass ratios, the productions of chemicals (furfu-ral, HMF, phenols, cathecol, and acetic acid) in the aqueous phase is highly dependent on the biomass-to-water ratio. For the experiments in laboratory scale with constant biomass-to-water ratio of 1:10, the yields of solid ranged between 55.9 and 51.1% (wt.), showing not only a linear decay with tem-perature, but also a lower degradation grade. The chemical composition of main organic compounds (furfu-ral, HMF, phenols, cathecol, and acetic acid) dissolved in the aqueous phase in laboratory scale shows the same behavior of those in obtained in pilot scale.

Beef dry aging consist in a selection of unpackaged primal cuts that are placed in a refrigerator room with controlled environment for several weeks. The goals are the concentration of flavor, like nutty and beefy and tenderness improvement. In this study it was intended verify the microbiological and physicochemical behavior and the meat sensorial perception during a process example of meat dry aging. Twelve beef loins were selected for 90 days of dry aging and placed in a refrigerator room with average temperature, relative humidity and forced air 3.17 ± 0.68 °C, 60.65 ± 4.23 % and 0.5-2 m/s, respectively. On 1, 14, 21, 35, 60 and 90 days of dry aging, were taken two samples, crust and lean meat for microbiological counts, pH, aw, color L*a*b* and sensorial analysis. During drying, there weren´t any pathogenic bacteria counts and the average counts were higher for the crust. The aw and pH had an average of 0.98 ± 0.02 and 5.77± 0.015, with a slightly decrease and increase respectively (P&lt;0.05) along aging days. The dry aging process practices, with room refrigeration at RH&lt;65.00% and temperature &lt;4.00 °C can be the reason for aw&lt;0.98 and meat pH&lt;6.00 and therefore for the absence of pathogenic bacteria. The lower microbial counts on the lean meat and the overall acceptability assessed by the sensory panel confirm the importance of the good trimming and storage practices for the dry aged beef.

Drying grains in a fixed bed can be an interesting alternative to prevent undesirable breaks and fractures of solids due to mechanical shocks, something that cannot be avoided when drying in moving beds. A disadvantage of fixed bed drying is that there can be significant gradients in the critical variables if the layer of particulate solids is thick. This work shows that periodically changing the direction of drying air flow is an effective technique to reduce differences within the bed and allow better uniformity of the product. Drying in a thick layer of 10 cm of sorghum grains was carried out at 50 and 60oC for air flow velocity of 2.1 m.s-1. The results showed that despite increasing the total drying time, the technique actually allowed a significant decrease in the temperature gradients and moisture content of the sorghum grains. The change in direction of the air flow caused the drying front to be displaced, sometimes towards the top, sometimes towards the base of the bed. At 50oC, drying lasted a total of 240 min, bringing the sorghum grains to an average overall moisture content of 0.13 on a dry basis.

This research focused on the perception of visually impaired individuals regarding tactile image creation using 3D printing. We developed and applied an experiment with 28 participants with visual impairments. They performed tasks based on skills whose foundations are needed and used in their daily lives, such as scanning, tactile discrimination, picture and spatial comprehension. The tactile images used in this study were developed by additive manufacturing and printed over 180 g/m² sulphite paper. The best performances were obtained when (1) the tactile image contour line heights were between 0.2 mm and 0.4 mm; and (2) the texture presented densities between 10% and 50%, when alone, or between 10% and 90%, when combined with another texture. The tested line widths (0.8 mm and 1.2 mm) did not present statistically significant differences in the results. Vision status (low vision or blindness) and moment of vision loss (congenital or late blind) did not influence the results. Schooling affected the activities of identifying objects and locating their copies. In the Conclusion section, there is a detailed recommendation list for the production and application of tactile materials, which range from simplifying forms to encouraging the use of both hands during content assimilation.

The prospect of drinking water serving as a conduit for gut bacteria, artificially selected by disinfection strategies and lack of monitoring at the point of use, is concerning. Certain opportunistic pathogens, notably some nontuberculous mycobacteria (NTM), often exceed coliform bacteria levels in drinking water, posing safety risks. NTM and other microbiota resist chlorination and thrive in plumbing systems. When inhaled, opportunistic NTM can infect the lungs of immunocompromised or chronically ill patients, and the elderly, primarily postmenopausal women. When ingested with drinking water, NTM often survive stomach acidity, reach the intestines, migrate to other organs using immune cells as vehicles, potentially colonizing tumor tissue, including in breast cancer. The link between the microbiome and cancer is not new, yet the recognition of intratumoral microbiomes is a recent development. Breast cancer risk rises with age, and NTM infections emerged as a concern among breast cancer patients. In addition to studies hinting at a potential association between chronic NTM infections and lung cancer, NTM have also been detected in breast tumors at levels higher than normal adjacent tissue. Evaluating the risks of continued ingestion of contaminated drinking water is paramount, especially given the ability of various bacteria to migrate from the gut to breast tissue via entero-mammary pathways. This underscores a pressing need to revise water safety monitoring guidelines and delve into hormonal factors, which includes addressing the disproportionate impact of NTM infections and breast cancer on women and examining the potential health risks posed by the cryptic and unchecked microbiota from drinking water.

Evidence on adult mammalian neurogenesis and scarce studies with human brains led to the idea that adult human neurogenesis occurs in the subgranular zone (SGZ) of the dentate gyrus and in the subventricular zone (SVZ). However, findings published from 2018 rekindled controversies on adult human SGZ neurogenesis. We systematically reviewed studies published during the first decade of characterization of adult human neurogenesis (1994–2004) – when the two-neurogenic-niche concept in humans was consolidated – and compared with further studies. The synthesis of both periods is that adult human neurogenesis occurs in an intensity ranging from practically zero to a level comparable to adult mammalian neurogenesis in general, which is the prevailing conclusion. Nonetheless, Bernier and colleagues showed in 2000 intriguing indications of adult human neurogenesis in a broad area including the limbic system. Likewise, we later showed evidence that limbic and hypothalamic structures surrounding the circumventricular organs form a continuous zone expressing neurogenesis markers encompassing the SGZ and SVZ. The conclusion is that publications from 2018 on adult human neurogenesis did not bring novel findings on location of neurogenic niches. Rather, we expect that the search of neurogenesis beyond the canonical adult mammalian neurogenic niches will confirm our indications that adult human neurogenesis is orchestrated in a broad brain area. We predict that this approach may, for example, clarify that human hippocampal neurogenesis occurs mostly in the CA1-subiculum zone and that the previously identified human rostral migratory stream arising from the SVZ is indeed the column of the fornix expressing neurogenesis markers.

The use of smartphones, coupled with different sensors, makes it an attractive solution for measuring different physical and physiological features, allowing for the monitoring of various parameters and even identifying some diseases. The BITalino device allows the use of different sensors, including Electroencephalography (EEG) and Electrocardiography (ECG) sensors, to study different health parameters. With these devices, the acquisition of signals is straightforward, and it is possible to connect them using a Bluetooth connection. With the acquired data, it is possible to measure parameters such as calculating the QRS complex and its variation with ECG data to control the individual's heartbeat. Similarly, by using the EEG sensor one could analyze the individual's brain activity and frequency. The purpose of this paper is to present a method for recognition of the diseases related to ECG and EEG data, with sensors available in off-the-shelf mobile devices and sensors connected to a BITalino device. The data were collected during the elderly's experiences, performing the Timed-Up and Go test, and the different diseases found in the sample in the study. The data were analyzed, and the following features were extracted from the ECG, including heart rate, heart rate variability, the average QRS interval, the average R-R interval, and the average R-S interval, and the EEG, including frequency and variability. Finally, the diseases are correlated with different parameters, proving that there are relations between the individuals and the different health conditions.

Intrusion Detection Systems play a crucial role in a network. They can detect different network attacks and raise warnings on them. Machine learning-based IDSs are trained on datasets that, due to the context, are inherently large, since they can contain network traffic from different time periods and often include a large number of features. In this paper, we present two contributions: the study of the importance of feature selection when using an IDS dataset, while striking a balance between performance and the number of features; and the study of the feasibility of using a low-capacity device, the Nvidia Jetson Nano, to implement an IDS in a low-capacity network. The results, comparing the GA with other well-known techniques in feature selection and reduction, show that the GA has a higher F1-score of 76%, although the time to find the optimal set of features surpasses other methods; the reduction of the number of features reduces the processing time without a significant impact in f1-score. The Jetson Nano allows the classification of network traffic with an overhead of 10 times in comparison to a traditional server.

Background and Objectives: Blood flow restriction (BFR) has been investigated as an alternative method combined with resistance training or AT to promote different health benefits for older people. Nevertheless, no study analyzed chronic effects of BFR on muscle activation in this population, and in some investigations, the application of BFR has been employed arbitrary pressures, which can be a serious methodological error, both from the results and of the risk to the health of the older. Thus, this study analyzed the effect of 24 weeks of walking with BFR on activation and muscle strength in elderly women with osteoporosis. Materials and Methods: Thirty older women (66.0±4.6 years) performed randomly to one of three training groups: WALK (moderate-intensity walking), WALK+BFR (low-intensity walking with BFR), or BFR (BFR alone). Muscle activation (sEMG) and strength of knee flexors and extensors were measured pre-intervention and after 12 and 24 weeks. Results: Only a trivial effect size (ES) for the WALK+BFR (ES= 0.16) was observed in sEMG of the knee flexors compared to WALK. A moderate effect was observed in sEMG of the knee extensors (ES= 0.65) for the WALK+BFR compared to the WALK. However, adverse effects were found in the strength of the knee flexors for the BFR (ES= −0.86) and WALK+BFR (ES= −0.69) compared to WALK. Adverse and null effects, respectively for the BFR (ES= −0.16) and WALK+BFR (ES= 0.06) groups, were also observed on the strength gain of the knee extensors. Conclusions: Low-intensity walk combined with BFR does not provide relevant chronic effects on strength gain or even limit muscle strength gain, however, due to greater activation of knee extensors over 24 weeks, it is possible to benefit from the use of similar strategies to obtain neuromuscular gains in the long‐term for elderly women with osteopenia and osteoporosis.

More than 700 anthocyanins are described so far, and many different sources are rich in these natural pigments. During the last few years, researchers have been focusing of strategies to recover and purify anthocyanins, from simple liquid-liquid extractions to more advanced supercritical CO2 extractions, however, with such a huge number of different sources, it’s extremely hard to get a simple and fast methodology that fits several sources, not only by the structural nature of the anthocyanins but also by the presence of specific groups of natural compounds. Using simple methodologies like solid-phase extraction resins represents a powerful economical and efficiency strategy. In this work, we tested several sources of structurally distinct anthocyanins, including purple basil, purple cabbage, purple sweet potato, butterfly pea flower, cornflower and wild pansy, in different resins to assess their efficiency in the obtention of anthocyanin-pure extracts. The results showed us that the combination of oasis HLB® resin followed by a cation-exchange SPE with DSC-MCAX® resulted in high-purity anthocyanin extracts for all the cases.

The objective of this work is to evaluate and compare the levels of bioactive compounds in basil leaves (Ocimum basilicum), fresh and after thermal drying processing freeze-dried, using methodological procedures that follow internationally recommended and accepted standards. Fresh basil leaves had 9.50 -63.3 mg/100g (vitamin C), 1.8 -3.9 mg EAG/g (total polyphenols), 0.73-1.78 mg/g (flavonoids), 2287.8-1003,8 μg/100g (chlorophyll a), 2606-2287 μg/100g (chlorophyll b), 16.71-20.6 (total carotenoids).Regarding color, there was variation in the parameters L*, a* and b* of the dry sample, but maintained the tendency towards green e (a+) and yellow (b-). Infrared analysis (FTIR) demonstrated the presence of functional groups related to cellulose, hemicellulose and lignin, confirmed by micrography (SEM) with visualization of plant parenchyma residues and fiber bundles. Thermogravimetry (TG/DTG) shows stability in the range of 234 °C, showing more intense mass loss at 294.6 °C. Given the data, it is possible to infer that basil is little affected by freeze-drying, with few changes in bioactive compounds, chemical groups and with good thermal stability. Thus, the application of the freeze-drying technique is a viable alternative to the commercialization of basil leaves, prolonging their useful life and increasing the forms of food applications.

The COVID-19 pandemic has contributed to mental health problems worldwide. Nurses are particularly prone to stress because they directly care for individuals with suspected or confirmed cases of COVID-19. The aim of this study is to explore the association between the mental health promotion strategies used by nurses during the coronavirus disease (COVID-19) outbreak and their symptoms of depression, anxiety, and stress, and to compare the strategies and symptoms of mental health nurses and non-mental health nurses. Cross-sectional study was conducted with a sample of 821 nurses. Portuguese nurses demonstrated high symptoms of depressive symptoms, stress, and anxiety. Healthy eating, physical activity, rest between shifts, maintaining social contacts, verbalizing feelings/emotions, and spending less time searching for information about COVID-19 are associated with better mental health. Mental health nurses have less depression, anxiety, and stress, and use more strategies to promote mental health than other nurses. We consider it important to promote nurses’ mental health literacy by encouraging them to develop skills and strategies aimed at improving their resilience and ability to deal with difficult situations while caring for the population.

Dietary protein quality plays a key role in maintaining intestinal mucosal integrity, but also modulates the growth of luminal microorganisms. This work assessed the effect of dietary protein sources on the performance, gut morphology, and microbiome in Nile tilapia. Four isonitrogenous and isolipidic diets comprising equivalent amounts of the protein supply derived from either PLANT, ANIMAL, INSECT, or MICROBIAL (bacterial biomass) sources were fed to triplicate groups of fish (IBW: 12 g) during 46 days. Fish fed ANIMAL and MICROBIAL diets showed significantly higher growth than those fed the PLANT and INSECT diets (P < 0.05). Relative abundance at the phylum level shows Bacteroidetes, Fusobacteria and Proteobacteria as more abundant phyla in tilapia’s intestine, while Cetobacterium is the most representative genera in all treatments. Interesting patterns were observed in the correlation between amino acid intake and genus and species abundance. Metabolism prediction analysis showed that microbial amine and polyamine degradation pathways are modulated depending on diets. In conclusion, different protein sources interfere directly with the cross-talk of bacteria pathways and amino acid intake.

The Yellow-legged Hornet (Vespa velutina nigrithorax) (YLH) is an invasive insect that arrived in Europe in 2004 and is now spread across nine countries. It is a threat to the native entomofauna and harmful to beekeeping and agriculture, as it is a ravenous predator of the European Honey Bee (Apis mellifera) and other pollinating species. Its expansion has been unstoppable and all resources are needed to fight against it, including native vertebrate predators. Among these, the European Bee-eater (Merops apiaster) (EBE) is a potential one, but little is known about its predation on YLH. In a study carried out in Portugal, remains of YHL were detected in EBE nesting sites, which to the best of our knowledge is the first such report. This means that this bird could be one more agent in the biological control of this pest (although research on predation intensity is still needed), in conjunction with other natural predators and other strategies. In the Iberian Peninsula both species are allopatric in vast regions, so the role of EBE may be more limited. However, in the rest of Europe, at a country or continent scale, the scenario may be different and sympatry may occur to a greater extent.

Photonic integrated circuits (PIC) devices are impacted by fabrication tolerances and therefore, prior knowledge of such variation could improve the PIC fabrication process and overall yield. This paper presents a method for predicting the fabrication impacts on a telecommunication optical digital to analog converter (oDAC) based pulse amplitude modulator level four (PAM-4) transmitter. Our findings allow us to estimate the production yield in fabrication scenario using symbol error rate (SER) benchmark.

The purpose of this article is to conduct a bibliometric review of literary production in terms of market interdependence. We investigate the effect of contagion on agricultural commodities and identify the commodities and methods used in the most cited publications over the decades. For this, we used the SCOPUS database, sorting with Rayyan, Excel, and finally, the Bibliometrix/R-project. The results showed that corn, wheat, soybeans, cotton, and sugar are the most studied commodities. There is no uniqueness concerning the methods used to identify interdependence and the contagion effect. Also, it is possible to perceive the growing scientific interest concerning the subject, with a diversity of authors and magazines. However, there is a direction of the and magazines most cited articles for analyzing agricultural commodities and energy, demonstrated a worldwide trend of studies relating natural resources, biofuels, clean energy, and efficiency. In addition, countries like China and the United States stand out in this scientific scenario as the countries that produce the most articles.

Unmanned Aerial Vehicles (UAVs) are being increasingly viewed as valuable tools to aid the management of farms. This kind of technology can be particularly useful in the context of extensive cattle farming, as production areas tend to be expansive and animals tend to be more loosely monitored. With the advent of deep learning, and Convolutional Neural Networks (CNNs) in particular, extracting relevant information from aerial images has become more effective. Despite the technological advancements in drone, imaging and machine learning technologies, the application of UAVs for cattle monitoring is far from being thoroughly studied, with many research gaps still remaining. In this context, the objectives of this study were threefold: 1) to determine the highest possible accuracy that could be achieved in the detection of animals of the Canchim breed, which is visually similar to the Nelore breed (\textit{Bos taurus indicus}); 2) to determine the ideal Ground Sample Distance (GSD) for animal detection; 3) to determine the most accurate CNN architecture for this specific problem. The experiments involved 1,853 images containing 8,629 samples of animals, and 15 different CNN architectures were tested. A total of 900 models were trained (15 CNN architectures * 3 spacial resolutions * 2 datasets * 10-fold cross validation), allowing for a deep analysis of the several aspects that impact the detection of cattle using aerial images captured using UAVs. Results revealed that many CNN architectures are robust enough to reliably detect animals in aerial images even under far from ideal conditions, indicating the viability of using UAVs for cattle monitoring.

Wireless power transfer promises to revolutionize the way we use and power mobile devices. However, low transfer efficiencies prevent this technology from seeing wide scale real-world adoption. The aim of this work is to use quasioptics to develop a system composed of a dielectric lens fed by a phased array to reduce spillover losses, increasing the beam efficiency, while working on the antenna system’s Fresnel zone. The DC-RF electronics, digital beamforming and beam-steering by an FPGA, and radiating 4x4 microstrip patch phased array have been developed and experimented upon, while the lens has been designed and simulated. This paper details these preliminary results, where the phased array radiation pattern was measured, showing that the beam is being generated and steered as expected, prompting the lens construction for the complete system experimentation.

Among the leading immersive technologies, Augmented Reality is one of the most promising and empowering to support designers in production environments. This research investigates the application of mobile augmented reality, based on the Web, as a mediation tool focused on cognitive activities of reading and understanding of Technical Drawings in the production and assembly for Tailor Made projects of the scenographic industry. In this context, the research presents a method to use the WebAR to improve the reading of technical drawings, seeking efficiency on the visualization of models and the exchange of information between professionals, involved in the processes of design, production and assembly of products, in the scope of scenography. This mediation tool was developed using Web AR platforms, compatible with native libraries (ARCore and ARKit) to ensure, first, compatibility with commonly used devices that workers or businesses can access, and secondly, to leverage hybrid tracking techniques that combine vision and sensors to improve the reliability of augmented reality viewing. The proposed solution adopts multiple tracking and navigation techniques in order to expand Space Skills components to provide greater exploratory freedom to users. The research process took place in the light of the Design Science Research Methodology and the DSR-Model, since it aimed to develop a solution to a practical problem, as well as to produce knowledge from this process. Field experiments were conducted in two real companies, with end users on their respective mobile devices, in order to evaluate usability and behavioral intent, through the Acceptance, Intent and Use of Technology questionnaires; and perceived mental workload, NASA-TLX. The experimental results show that the adoption of this tool reduces the cognitive load in the process of reading technical drawings and project´s understanding. In general, it´s usability and intent to use provide significant levels of satisfaction, being positively accepted by all participants involved in the study.

In this work, dry and hydrothermal carbonization (DC and HTC) of RDF pellets were conducted to evaluate the physical, chemical, and fuel properties of the produced chars. In the dry carbonization tests, biomass sawdust was incorporated in different proportions on the samples to minimize agglomeration caused by the melting of the plastic fraction. The experiments were carried out in a temperature of 400°C (DC) and 250-300°C (HTC), in a residence time of 30 minutes. The respective chars and hydrochars were characterized according to their mass yield, apparent density, proximate, elemental, and mineral composition, chlorine content, high heating value, thermogravimetric profile, and surface functional groups. The results showed that dry carbonization of RDF pellets with biomass incorporation, followed by a washing step, resulted in the production of chars with improved properties such as higher fixed carbon and HHV (25-26 MJ/kg) and lower ash and chlorine content. Additionally, the HTC experiments demonstrated that hydrochars showed improved properties without the need for biomass addition and washing, however, with no significant difference in the HHV (20-21 MJ/kg). Therefore, DC of RDF pellets with 10% biomass incorporation seems to be a promising option to overcome the constraints of RDF utilization as an alternative fuel.

Dyslipidemia presents high levels of serum cholesterol, being characterized as a risk factor for cardiovascular diseases, especially for the development of atherosclerosis. E. oleracea (OFEO), A. esculentus (OFAE), B. orellana (OFBO) and granulated (CHR) oils are rich in bioactive compounds with potential to treat changes in lipid metabolism. This study investigated the effects of treatments with oils from A. esculentus, E. oleracea, B. orellana and granules (Chronic SM®) on saturated fat-induced dyslipidemia Cocos nucifera L. The chromatographic profile showed the majority of unsaturated fatty acids in the tested oils. The quantification of tocotrienols and geranylgeraniol was obtained in OFBO and CHR. Treatments with OFEO, OFAE, OFBO and CHR were able to significantly reduce glycemia with p&gt;0.001, as well as hypertriglyceridemia, total cholesterol and LDL-cholesterol, in addition to increasing HDL-cholesterol. The treatments inhibited the formation of atheromatous plaques in the vascular endothelium of the treated rats. The obtained results suggest that the OFEO, OFAE, OFBO and CHR groups have antidyslipidemic effects and antiatherogenic activity.

The required processes and steps for making bread include technological and innovative concepts. The current trend is the use of less toxic compounds and green processes. Besides lactic acid bacteria and yeast, other microorganisms with special properties, such as enzymes, new aroma and flavor, exopolysaccharides, and vitamins, among other compounds with beneficial properties, could be added to bread manufacture, improving bread quality and health effects for the consumers. Freeze drying, new encapsulation methods, cryoprotectants, spray drying, fluidized bed drying, and vacuum drying are used for probiotics and microorganism cultures that will be used as starters or biological additives in the fermentation. The same development is observed in the preservation methods, and studies with plant extracts and essential oils have been proposed and introduced, replacing chemical agents, such as propionate, within the clean-label bread formulations concept. Baking science is a growing research line incorporating innovative methods and biological additives.

This study analyzed the relationship between anthropometric measures, cardiorespiratory capacity, strength, power and local muscle endurance with performance in the CrossFit® Open 2020. For this, 17 volunteers (6 women) (29.0 ± 7.2 years; 70.5 ± 9.8 kg) completed, on separate weeks, body composition (dual-energy x-ray absorptiometry), maximal oxygen consumption (2km row test), muscle strength (1RM back and front squat, isometric peak torque), and muscle power (1RM snatch and clean &amp; jerk), and muscle endurance (Tibana test), which were compared with performance during the CrossFit® Open 2020. Multiple linear regression showed that for the CrossFit Open 2020.1 and 2020.2 workouts, the score in the Tibana test was the only variable that explained the outcomes (Beta = -0.78, p &lt; 0.01 for 2020.1 workout and Beta = 0.82, p &lt; 0.01 for 2020.2 workout). Performance in the CrossFit Open 2020.3 and 2020.4 workouts were explained through the relative strength (Beta = 0.58, p = 0.02 for 2020.3 workout and Beta = 0.50, p = 0.04 for 2020.4 workout). Lastly, Tibana test had the greatest influence on CrossFit Open 2020.5 workout (Beta = -0.75, p &lt; 0.01). A local muscle endurance and muscle strength may be used to predict CrossFit® open workout performance.

The sustainability of agroecological systems, biodiversity protection, animal welfare and consumer demand for higher-quality products from alternative and extensive farming methods, have reinforced interest in local breeds that are well adapted to low-input environments. However, food safety needs to be safeguarded to reinforce consumer confidence. The aim of this study was to conduct a preliminary investigation on the occurrence of Salmonella spp. in eggshells, hen’s cloaca and litter materials from autochthonous Portuguese laying hens raised in a semi-extensive system for small-scale production. A total of 279 samples were obtained, with 63 samples from the “Preta Lusitânica” breed, and 72 samples each from the remaining autochthonous breeds, namely “Branca”, “Amarela” and “Pedrês Portuguesa”. None (0%) of the samples analyzed were positive for Salmonella spp.. To the best of our knowledge, these are the first results of Salmonella evaluation from hen’s cloaca, eggshells, and litter materials in autochthonous Portuguese chickens, suggesting that a semi-extensive production system can contribute to better food security and a lower risk to public health and the environment.

Smart Grid systems have become popular and necessary for the development of a sustainable power grid. These systems use different technologies to provide optimized services to the users of the network. Regarding computing, these systems optimize electrical services by processing a large amount of data generated. However, privacy and security are essential in this kind of system. With a large amount of data generated, it is necessary to protect the privacy of users, because this data may reveal users’ personal information. Today, blockchain technology has proven to be an efficient architecture for solving privacy and security problems in different scenarios. Over the years, different blockchain platforms have emerged, attempting to solve specific problems in different areas. However, the use of different platforms fragmented the market, which was no different in the smart grid scenario. This work proposes a blockchain architecture that uses sidechains to make the system scalable and adaptable. We used three blockchains to ensure privacy, security, and trust in the system. To universalize the proposed solution, we used the OSGP protocol and smart contracts. The results show that architecture security and privacy are guaranteed, making it feasible for implementation in real systems. Although scalability issues regarding the storage of data generated still exists.

Exosomes have shown promising potential as a therapeutic approach for wound healing. Nevertheless, the translation from experimental studies to commercially available treatments is still lacking. To assess the current state of research in this field, a systematic review was performed to examine the methodological heterogeneity among studies conducted over the past five years. Additionally, the review analyzed the suitability of animal models used and their relevance to human medicine. A PubMed search was performed for english-language, full-text available papers published from 2018 to June 2023, focusing on exosomes derived from mammalian sources and their application in wound healing, particularly those involving in vivo assays. Out of 531 results, 148 papers were selected for analysis. The findings revealed significant variability in terms of cell sources and types, biomaterials, and administration routes under investigation, indicating the need for further research in this field. Additionally, a comparative examination encompassing diverse cellular origins, types, administration pathways, or biomaterials is imperative. Furthermore, the predominance of rodent-based animal models raises concerns, as there have been limited advancements towards more complex in vivo models and scale-up assays. These constraints underscore the substantial efforts that remain necessary before attaining commercially viable and extensively applicable therapeutic approaches using exosomes.

Plant loss in experimental plots occurs occasionally in field experiments with coffee crops. In breeding programmes, such loss can be extremely harmful, especially when the statistical analysis methods used are not consistent with the data generated in the experiments. In this study, we analysed a set of productivity data to determine whether the compensatory effect occurs in coffee crops, analyse the need for correcting the number of failures in experiments, and identify the best stand correction method to use. Productivity data from six harvests of 11 experiments with Coffea arabica plants were used. The experiments were implemented in a randomised block design, with four replications and six plants per plot. The following stand correction methods were evaluated: rule of three, Zuber [1], Vencovsky and Cruz [2]covariance of the average or ideal stands, and Cruz [3] and compared to data without correction adjustments. The most adequate correction methods were chosen based on the existence of genetic variance, selective accuracy, and progeny ordering. The compensatory effect was evident from the analysed data, with stand correction shown to be beneficial in progeny competition experiments. The covariance methods using average or ideal stands presented the best results, followed by the method proposed by Cruz [3]. The rule of three and Zuber [1] methods showed unsatisfactory results and are not recommended for stand correction in progeny competition experiments with coffee crops

Currently, some non-conventional therapies (NCT), such as acupuncture, homeopathy, osteopathy, naturopathy, herbology, and Traditional Chinese Medicine are structured and well-regulated for a market of teaching and clinical practice in Portugal, among which acupuncture has become one of the most appealing and functional branches. Through investigation of acupuncture laws, field surveys, teaching work and interviews with people from NCT field in Portugal, we showed the current acupuncture education in Portugal and found that according to the academic norms and rules of education in Portugal, there is a gradual difficulty in the progression and maintenance of the degree training dynamics, due to the lack of more tolerant transitional measures and also, a timid commitment on the part of the institutions that embark on these complementary programs. Therefore, it will be necessary to promote additional programs and measures that avoid a total emptiness of the teaching of acupuncture and at the same time losses of clinicians, competencies and quality of information that are difficult to recover. It could be very meaningful and thought-provoking to the future development and improvement of acupuncture in Portugal and in other countries that welcome acupuncture and intend to have a better legislation and application.

Staphylococcus aureus is a causative agent of nosocomial infections and its antibiotic-resistant strains are concerning. Solutions are being explored to improve the treatment of these infections, including repositioning drugs such as statins and using nanoparticles with antimicrobial properties. This study aimed to evaluate the antimicrobial effects of simvastatin (SIM) and biologically synthesized silver nanoparticles (bio-AgNPs) in isolate form and in combination by assays of minimum inhibitory concentration (MIC), an in vitro biofilm model, and the association of antimicrobials against clinical strains of S. aureus. Bio-AgNPs showed a 53.8 ± 1.23-nm mean diameter and standard deviation, a 0.23 polydispersity index, and a −25.66 ± 2.19-mV mean potential and standard deviation. Transmission electron microscopy confirmed the formation of nanoparticles and the presence of Ag0 and AgCl. S. aureus strains were sensitive to bio-AgNPs and SIM, showing 31.88-187.5 and 74.66-149.32 μM concentrations, respectively. Our association assay showed 2.0 fractional inhibitory concentration indices (i.e., indifferent for clinical strains) and 0.32 values for the standard ATCC 29213 strain (synergy). Our biofilm inhibition assays with isolated SIM and bio-AgNPs showed decreased biofilm formation from 4× to ⅛ MICs, showing no synergism in association. These findings evince that simvastatin and bio-AgNPs at subinhibitory concentrations can serve as antimicrobial agents against S. aureus biofilm.

Type 2 Diabetes Mellitus is a chronic metabolic disease that poses a significant long-term health risk due to its debilitating complications. While the diagnosis and monitoring of diabetes are well-established, the monitoring of its numerous complications presents a challenge, which can compromise patients' prognosis and quality of life. We analyzed the proteome of ten saliva samples, five from healthy individuals and five from patients with Type 2 Diabetes Mellitus. The aim was to identify potential biomarkers of Type 2 Diabetes Mellitus and its complications. We used PANTHER and FUNRICH tools to conduct a functional analysis and enrichment approach. Our findings revealed 622 proteins involved in 16 disrupted biological processes, which are linked to Type 2 Diabetes Mellitus. Metabolic processes, response to stimuli, processes of the immune system, and signaling are notable due to their known relation with Type 2 Diabetes Mellitus. Enrichment analysis has revealed that there are eleven biological processes that have been deregulated. These processes involve twenty different salivary proteins that are associated with multiple complications in diabetes. Our findings demonstrate that saliva is a dependable source of possible biomarkers that can be used to monitor diabetes and its complications.

The purpose of this study was to assess if self-regulation of intensity based on rating of perceived exertion (RPE) is a reliable method to control the intensity of metabolic conditioning of functional-fitness session. In addition, the relationship between RPE and changes in heart rate and lactate responses was also analyzed. Eight male participants (age 28.1 ± 5.4 years; body mass 77.2 ± 4.4kg; VO₂max: 52.6 ± 4.6 mL·(kg·min)⁻¹) completed three randomly sessions (5 to 7 days apart) under different conditions: (1) all-out (ALL); (2) self-regulation of intensity based on a RPE of 6 (hard) on the Borg CR-10 scale (RPE6); and (3) a control session. Rate of perceived exertion, LAC and HR response were measured pre, during and immediately after the sessions. The RPE and LAC during the ALL-OUT sessions were higher (p ≤ 0.05) than the RPE6 and control sessions for all the analyzed time points during the sessions. Regarding HR, the 22 min area under the curve of HR during ALL-OUT and RPE6 sessions were significantly higher (p ≤ 0.05) than the control session. The average number of repetitions was lower (p ≤ 0.05) for the RPE6 session (190.5 ± 12.5 repetitions) when compared to the ALL session (214.4 ± 18.6 repetitions). There was a significant correlation between RPE and LAC (p = 0.001; r = 0.76; very large) and number of repetitions during the session (p = 0.026; r = 0.55; large). No correlation was observed between RPE and HR (p = 0.147; r = 0.380). These results indicate that self-regulation of intensity of effort based on RPE may be a useful tool to control exercise intensity during a metabolic conditioning session of functional-fitness.

Sleep timing is one of the dimensions of sleep that refers to the time of day when sleep occurs. It was included in sleep-related research because of the potential associations between overweight and consumption of meals and snacks. This cross-sectional study aimed to investigate associations between sleep timing, meal and snack consumption, and weight status in 1333 schoolchildren aged 7-14 years. The midpoint of sleep was used as a sleep timing measure obtained by the midpoint between bedtime and wake-up time and classify as Early, intermediate, and Late. Schoolchildren in the Early group were less likely to be overweight (OR: 0.83, 95% CI 0.69; 0.99), had higher odds of mid-morning snack consumption (OR: 1.95, 95%CI 1.56; 2.44) and lower probability to consume the evening snack (OR: 0.75, 95%CI 0.59; 0.94) compared with the Intermediate group. The Late group had lower odds of mid-morning snack consumption (OR: 0.67, 95%CI 0.55, 0.80) than the Intermediate group. The consumption of mid-morning and evening snacks was associated with the Early and the Late midpoint of sleep. These results suggest that bedtime and wake-up time are relevant to consuming meals and snacks and may also be related to a greater probability of being overweight in children and adolescents.

The flexitarian diet, which emphasizes a reduction in meat consumption, has been identified as a crucial factor in transitioning to sustainable food systems that can help combat climate change and improve food and nutritional security, particularly in areas where food choices are abundant. Despite Brazil being a major meat producer, meat consumption among Brazilians has been decreasing in recent years, with a growing portion of the population adopting meat-free and meat-reduced dietary models. In this study, we conducted the first non-industry funded scientific investigation of Brazilian flexitarians, with the goal of characterizing their socio-economic and demographic characteristics, motivations for adopting flexitarianism, frequency of animal-based meat consumption, and main substitutes consumed. Data was collected from 1029 self-identified flexitarians in Brazil. Our findings indicate that the flexitarian food model is primarily adopted by women and is motivated by concerns about the environmental impact of meat consumption, personal health, and animal welfare. Flexitarians were found to have a consumption profile that can be divided into three groups: low (consuming meat 36 times a week), medium (consuming meat 7 times a week), and high (consuming meat 4 times a week). The flexitarian meals pattern is characterized by lower consumption of beef (less than 2 times per week) and higher consumption of chicken (3 times per week) and is supplemented by plant-based protein sources and eggs as the main meat substitutes.

The effect of the different dental implants positioning region on the stress performance of the implant-supported prosthesis is not yet clear. This study evaluated the dental treatment with six dental implants in three different models and three different occlusal loading conditions, in terms of the biomechanical response of implants, prosthetic screw and maxilla, using three-dimensional finite element analysis. The finite element models were modelled containing external hexagon implants, as well as a Cobalt-Chromium superstructure. Three types of loads were applied: in the area of ​​the central incisors, first premolar and in the second molars. For the finite element simulations, the von-Mises stress peaks in the implant and in the surrounding cortical bone were analyzed. All recorded results reported higher values ​​for the implant-supported prosthesis in group C compared to the groups A and B. The highest stress values, ​​regardless the evaluated model, was in the prosthesis in group C and in screws, the smallest were in group A.

Control of Tropical Theileriosis, a tick-borne disease with a strong impact on cattle breeding, can be facilitated by using marker-assisted selection in breeding programs. Genome-wide association studies (GWAS) using high-density arrays are extremely important for the ongoing process of identifying genomic variants associated with resistance to Theileria annulata infection. In this work, Single Nucleotide Polymorphisms (SNPs) were analyzed in the Portuguese autochthonous cattle breeds Alentejana and Mertolenga. In total, 14 SNPs suggestive of significance (p ≤ 10-4) were identified for Alentejana cattle and 20 SNPs for Mertolenga cattle. The genomic regions around these SNPs were further investigated for annotated genes and Quantitative trait loci (QTLs) previously described by other authors. Regarding the Alentejana breed, the MAP3K1, CMTM7, SSFA2, and ATG13 genes are located near suggestive SNPs and appear as candidate genes for resistance to Tropical Theileriosis, considering its action the immune response and resistance to other diseases. On the other hand, in the Mertolenga breed, the UOX gene is also a candidate gene due to its apparent link to the pathogenesis of the disease. These results may represent a first step towards the possibility of including genetic markers for resistance to Tropical Theileriosis in current breed selection programs.