The integration of artificial intelligence (AI) into academic settings in Sabah, Malaysia, is transforming education and research landscapes. While AI technologies promise to enhance teaching, learning, and scholarly activities, they also pose challenges such as ethical concerns and skill gaps among academic staff. This study addresses the multifaceted impacts of AI adoption on academicians in Sabah, focusing on two key research questions: the impact of AI-based intelligent tutoring systems on student engagement, learning outcomes, and educational equity, and the challenges and opportunities in building academicians' capacity to integrate AI technologies effectively. Through a multidisciplinary approach, incorporating insights from education, computer science, social sciences, and ethics, this research aims to evaluate the effectiveness of AI tools in educational settings and identify strategies for skill development and infrastructure support. The study recommends empirical assessments within Sabah's educational institutions, considering contextual factors and fostering collaborative partnerships with local communities. Professional development programs, collaboration with industry partners, and improved access to AI infrastructure are proposed strategies. Longitudinal studies and interdisciplinary research initiatives are suggested for future research, along with qualitative methods to capture diverse perspectives. Ultimately, by embracing a collaborative and multidisciplinary approach, Sabah's academic community can harness the transformative potential of AI to advance education, research, and scholarship while promoting ethical and inclusive practices.

Bipolar plates significantly contribute in the development of the polymer electrolyte membrane (PEM) fuel cells technology due to their ability to produce high electrical conductivity based on type of materials used. Mismatching of inappropriate materials and manufacture may lead to the inferior performance of PEM fuel cells. Hence, material development was determined crucial to balance the overall performance of PEM fuels including the mechanical properties and electrical conductivity of the materials. Studies on conductive polymer composites (CPCs) offered filler orientation as an alternative method to enhance the overall performance of bipolar plate. Filler orientations permit an excellent conductivity network formation while controlling the filler alignment based on required applications. This paper reviewed various studies of filler orientations including materials used and methods of manufacture of CPC materials for the effective development of bipolar plate.

Influential Observations, which are outliers in x direction, y direction or both, remain a hitch in classical regression model fitting. Spatial regression model, with peculiar nature of outliers due to their local nature, is not free from the effect of such influential observations. Researchers have adapted some classical regression techniques to the spatial models and yielded satisfactory results. However, masking or/and swamping remain stumbling block to such methods. We obtained the spatial representation of the classical regression measures of diagnostic in general spatial model. Commonly used diagnostic measure in spatial diagnostic, the Cook's distance, is compared to some robust methods, Hi2 (using robust and non-robust measures), and classification based on generalized residuals and diagnostic generalized potentials, ISRs-Posi and ESRs-Posi, with the help of the obtained spatial prediction residuals and the spatial leverage term. Results of simulation and applications to real data have shown the advantage of the ISRs-Posi and ESRs-Posi due to classification of outliers over Cook's distance and non-robust Hsi12, which suffer from masking, and robust Hsi22 which suffer from swamping in general spatial model.

A sustainable, scalable source of energy‐dense chemical fuel is urgently needed to ensure the security of our energy supply for future generations. Solar energy is the only renewable energy source of sufficient scale to replace fossil fuels and meet rising environmental demand. Hydrogen is expected to play a key role as an energy carrier in future energy systems of the world. As fossil fuel supplies become scarcer and environmental concerns increase, hydrogen is likely to become an increasingly important chemical energy carrier and eventually may become the principal chemical energy carrier. When most of the world’s energy sources become non-fossil based, hydrogen and electricity are expected to be the two dominant energy carriers for the provision of end-use services. Photocatalytic hydrogen evolution from water by solar energy over semiconductors offers a promising way for clean and renewable production of hydrogen. The TiO2-based materials have received considerable attention in recent years due to their extensive application in photocatalysis for hydrogen evolution. Though TiO2 is the most widely investigated photocatalyst for hydrogen evolution, it still provides low photocatalytic activity due to the wide bandgap that results in photocatalytic activity only under ultraviolet (UV) irradiation. Modification of TiO2 photocatalysts with several transition metals has been extensively studied to extend the absorbance capacity of TiO2 into the visible range. The effect of different photocatalytic deposition and reaction parameters also play major roles in enhancing the photostability of photoanode and increasing the hydrogen gas output, respectively.

This study aimed to characterize the antioxidant, mechanical and physical properties of chicken skin gelatin/CMC/Centella asiatica blended film. The influence of Centella asiatica at 0.3% and 0.7% on antioxidant activities; mechanical properties and physical properties of chicken skin gelatin/CMC/Centella asiatica film were investigated. Characterization of the blended films with 0.7% Centella asiatica extract shows higher antioxidant activities with a total phenolic content of 0.36 mg/g of GAE, DPPH of 89.26%, and reducing power of 0.80 nm compared to 0.3% Centella asiatica extract. The addition of 0.3% of Centella extract provide higher value in tensile strength (5.0 × 10⁻² MPa), elongation at break (281%), melting point (131.31 °C), transparency (0.86) but lower UV-light penetration. While the addition of 0.7% Centella extract contribute to higher value in WVP (1.13 × 10⁻⁴ g m⁻¹s⁻¹Pa⁻¹) and puncture test (0.06 N). There are no significant differences between functional groups obtained from this blended film as evaluated by FTIR analysis (p > 0.05). Furthermore, XRD analysis showed the addition of extract decrease the crystallinity of film. In conclusion, the incorporation of Centella asiatica extracts on film greatly increased antioxidant levels and improved some of the mechanical and physical properties of the film blends.

Stingless bee beekeeping provides new opportunities to improve the incomes of many households in Malaysia through the sale of honey and other bee products. While Heterotrigona itama is one of the most commonly cultured species of stingless bees, its behavior is not very well understood. Hence, we conducted this study to investigate the behavior of H. itama in exploiting food sources by ascertaining the nectar sugar concentration preferred by the bee. We also aimed to determine the preferred distance of food source from the bee hive. Our results suggest that H. itama prefers high sugar concentrations of 35% and above, and they would fly up to 7 m from the hive to collect food. We discuss how nectar concentration and food distance influence the number of bees exploiting food sources and the overall foraging pattern of H. itama.

Drought and high temperature often occur simultaneously will eventually affect rice (Oryza sativa L.) yield and seed quality. The objective of the study was to compare the effects of high temperature (HT) and water limitation (WL) during seed development and maturation on yield component, seed quality, and amylose content in aerobic rice cv. MRIA. Two experiments were conducted concurrently in greenhouse with ⁓35/26℃ subjected to elevated HT and/or WL; 5 days 38/28°C at 10, 15, 29 DAA and/or HT; 7 days at 40/28℃ at 8 and 21 DAA with 12h photoperiod in control environment growth chamber. Both experiments were respectively harvested at physiological maturity of 31 and 35 DAA. Grain yielded from the irrigated plant declined from over 27% to below 18% between 15 and 29 DAA. Combination stresses resulted in greater reduction of grain yield than single stress. Late seed development (29 DAA) had no effect either on yield component or seed quality as well as produce a high concentration in amylase content (16.7%) with greater germination capacity (91%). The non-stress plant harvested at 21 DAA resulted the highest percentage of germinated seeds (97%) whereas the vigour index (VI) was reduced to 70.3% and 58.9% at 8 and 21 DAA respectively. Extended plant stress to 7 consecutive days incurred the highest VI with low concentration of amylose content. There was a linear relationship incurred between seed amylase content with germination capacity and VI, however, there was an inverse relationship (R2 = 0.19) between amylase content with VI from plant treated with (HT and/or WL) for 7 days. The present results confirmed that the avoidance HT and WL during early (10 DAA) and mid (15 DAA) seed development with short duration of stress (5 days) obtained better in yield component, enhanced the seed quality and amylose concentration. The combined HT and WL damaged seeds’ quality were more than each stress alone. Therefore, avoiding HT and WL can be practically applied by farmers by irrigating throughout the rice plant during histodifferentiation to save water usage during seed maturation.

Coating of suitable materials having thickness of few atoms to several microns on a substrate is of great interest to the scientific community. Hard coatings develop under the significant composition of suitable-natured atoms where their force-energy behaviors when in certain transition state favour binding. In the binding mechanism of suitable atoms, electron belonging to outer ring filled state of gas-atom undertakes another clamp of energy knot belonging to outer ring unfilled state of solid-atom. Set process conditions develop the binding of different-natured atoms when processing their suitable composition in a system. Atoms of different nature develop structure in the form of hard coating by locating their ground points between the original ones. Here, gas-natured atoms increase the potential energy under decreasing levitational force of electrons, whereas, solid-natured atoms decrease the potential energy under decreasing gravitational force of electrons. In TiN coating, Ti–Ti atoms bind under the difference of expansion of their lattices, called nets of energy knots, where one atom just lands on the already landed atom. An adhered N-atom to a Ti-atom forms its position among four Ti-atoms where N-atom occupies the interstitial site of Ti-atoms. Two oppositely working force-energy behavior atoms deposit in the form of coating at substrate surface as per set conditions of the process. The rate of ejecting (or dissociating) solid-natured atoms depend on the nature of their source (target), process parameters and processing technique. In random arc-based vapor deposition system, depositing differently natured atoms at substrate surface depends on the input power. In addition to intrinsic nature of atoms, different properties and characteristics of coatings emerge as per engaged forces under their involved energy. The present study sets new trends in the field of coatings involving the diversified class of materials and their counterparts.

Bus services play a significant role as the main public transportation, especially in urban areas throughout the years. Since bus services compete greatly with other types of public transportation, such as e-hailing service and private vehicles, they have recently attracted scholars to conduct many relevant studies. However, most past research studies in the Asian region were not focused on engineering, social science, and Internet of Things (IOT). This present study concentrated on the service quality of bus services in Asia by using systematic literature review of articles. This study conducted a review based on previous studies, specifically on the service quality of performance. Several previous studies were selected by using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRIMSA) approach. SCOPUS and Science Direct were chosen as the main journal database. By using this method, 41 articles were selected for further analysis. This study was merely focused on three primary themes, such as study approach, stakeholder, and service quality attributes. Advanced analysis on these primary themes was used to formulate another 18 sub-themes. All themes and sub-themes which reflected the significant impacts of service quality towards bus services were discussed in detail. This study had addressed several qualities of bus services of bus performance towards improvement of urban transportation polices. Lastly, several recommendations that could provide necessary knowledge and information for future research were presented.

Coronavirus disease (COVID-19) is a new discovered strain where WHO officially declares the disease as COVID-19 while the virus responsible for it called Severe Acute Respiratory Syndrome Coronavirus 2 or SARS-CoV-2. The incubation period of this disease is between 14 days. Ordinary clinical symptoms that reported around the world include fever, cough, fatigue, diarrhoea and vomiting as well as asymptomatic for certain people. Infection is spread mainly through broad droplets. In early March 2020, WHO again has announced that COVID-19 is a pandemic with currently no specific treatment. The potential use of SARS-COV-2 proteome as a vaccine candidate by analysing through B-cell and T-cell antigenicity by using a immunoinformatics approach as a vaccine development early stage. In this study, we used consensus sequence for SARS-COV-2 proteome that was retrieved from NCBI database. VaxiJen 2.0 was mainly used to identify the antigenic property of SARS-COV-2 proteins. IEDB then used to analyse the B-cell epitope, the presence of T cell immunogenic epitope in SARS-COV-2 proteins was obtained by using compromise method of MHC class I and II tools that accessible respectively using ProPred-1 server and MHC II Binding Prediction in IEDB database. The best epitopes of B and T-cell epitopes were predicted with high antigencity and the information is disseminated through web-based database resource (https://covid-19.omicstutorials.com/epitopes/). This study will be useful to find a new epitope-based candidate for SARS-COV-2. However, further study needs to be done for the next stages of vaccine development.

Antibiotic resistance among bacterial pathogens is recognized as a major threat to human health worldwide. The emergence of multidrug-resistant bacteria can also be found in the community settings, apart from hospital environment, which indicates that reservoirs of antibiotic resistance genes do exist outside the hospital. The growth of antibiotic resistance is a consequence of bacterial adaptations in response to selective pressures. To survive in this hostile environment, bacteria develop defence mechanisms such as chemical modification of antibiotics, enzyme-catalysed antibiotic degradation, altered permeability, antibiotic efflux, mutation of target sites and biofilm formation, resulting in resistance to nearly all currently available antibiotics used in the clinical practice. The present review summarizes insights into the molecular mechanisms underlying the antibiotic resistance which is useful for planning strategies to combat antibiotic resistance and devise innovative therapeutic tools to fight against multidrug-resistant bacterial species.

In recent years, the production of cement has grown globally in a very rapid manner due to the modernization of the world we live in, and after fossil fuels and land-use change, cement production is the third-largest source of anthropogenic emissions of carbon dioxide, CO₂. Cement being the primary binding material for concrete and with the prospects for the concrete industry continues to grow so will the emissions of CO₂. Hence, a method to reduce the CO₂ production while keeping up with the progression of the concrete industry is very crucial in current times. This is where CO₂ sequestration comes in. It is a process where CO₂ is converted into a mineral which will then be trapped into the concrete forever. Required data to carry out the research between CO₂ sequestered concrete and concrete without CO₂ have been observed, obtained and tabulated as necessary. These data are then used to compare the concrete samples with one another and also prove the theoretical effects of CO₂ exposure to concrete. Hence, experimental results on the compressive strength of the concrete samples for 7, 14 and 28 days has also been tabulated, graphed and further disputed. The objective of this research is mainly to determine the compressive strength of CO₂ sequestered concrete in comparison with concrete without CO₂ in order to decrease the effects the concrete industry has on the environment. The compressive strength of concrete samples with sequestration of CO₂ gas is expected to be higher than of the concrete without CO₂.

Carbon dioxide, CO₂ accounts for most of the emission from all the types of greenhouse gasses in the world. The ability of CO₂ to remain longer than other greenhouse gases and the convenience of producing CO₂ has resulted in its high projection in a yearly manner. The prime factor for the emission of CO₂ are from the actions of human beings. One such human act is the concrete industry. Total emissions from the concrete industry could therefore contribute as much as 8% of global CO₂ emissions. Sequestered CO₂ in concrete can provide an impact on reducing the carbon footprint and is also able to improve the compressive strength of concrete. During this process, the sequestered carbon dioxide chemically reacts with cement to produce a mineral, trapping carbon dioxide gas in the concrete. Hence, sequestering carbon dioxide gas in concrete does not only on a bigger scale reduces carbon footprint, but it also reduces the impact the construction industry has on the environment. This paper presents a detailed review on the chemical reaction that takes place during the sequestration of carbon dioxide and the research published on the effects of carbon dioxide sequestered concrete on its properties. The impact this process has on the concrete industry and the environment is discussed in this paper.

Over the years, researchers have been developing different ventilation strategies as a potential solution for controlling infectious airborne transmissions in healthcare facilities. The effects of ventilation systems on airflow characteristics have been extensively discussed among researchers since SARS-CoV-2 outbreak in 2019. Based on a bibliometric study of 154 publications from 1970 to 2021 retrieved from the Web of Science (WoS) database, this paper examines the research landscape on the effects of ventilation strategies on airflow analysis in healthcare facilities. Results show that China is the most productive country due to its significant contributions to the top prolific authors and funding agencies, which have promoted the research development of the topic. Several research hotspots were identified through keyword co-occurrence analysis. Cluster 1 highlights the ventilation studies involving ventilation layouts and ventilation rates in healthcare facilities. Cluster 2 underlines the computational analysis of ventilation performance for reducing the exposure risk of occupants, which promotes the development of infection control measures. Cluster 3 strengthens the knowledge of the emission and dispersion characteristics of respiratory droplets in healthcare facilities. Overall, this paper highlights the future direction of the current research field other than identifying strategic collaborators and suitable publication outlets for interested researchers.

Corporate identity has played a vital role in the Halal industry to create a strong foundation for its reputation in the long run. This paper used two modeling analyses for two different data. The first analysis aims to predict the relationship between Corporate Identity Management between Internal Brand and Employee Brand Support (consequence) mediated by CIM using partial-least squares-structural equation modeling (PLS-SEM). A total of 206 employees from Malaysia’s Halal food SMEs took part in the survey. The second analysis to identify topic proportions patterns using the topic modeling approach on Halal brand identity Machine learning approach of knowledge mining was applied for this analysis. Metadata of 1,091 articles were mined from the Scopus database on Halal studies across all social sciences fields. The result revealed that there was a partial relationship between Internal Brand (antecedent) and Employee Brand Support (consequence) mediated by CIM. This finding was supported by the identified topic proportions patterns from the topic modeling approach that pointed out a weak topic proportion on the Halal brand identity discussion globally, interestingly the result also found that the Halal brand identity discussion involving the Halal food industry is almost non-existed in Malaysia’s Halal food SMEs. The contributions of this paper were apparent in three major areas which are methodology, theoretical and future suggestions. The utilization of two different model analyses was able to confirm the consistency of the major findings with the literature review which opens up more possibilities for future researchers.

Global waste generation keeps increasing over the year and requires innovative solutions to minimize their impacts on environmental quality and public health. Predicted 2.2 billion tonnes per year of global municipal waste generation in the year 2025 which 1.6 fold is higher than in 2012. Hence, a strategic plan must be ascertained to overcome the future challenges of MSW locally and globally. Universiti Putra Malaysia (UPM) coined an initiative to demonstrate a showcase pilot plant for green energy production from MSW. Therefore, the data was obtained from the survey and actual sampling within the UPM compound to estimate the MSW generated and it's potentially used for green energy production. It is estimated that 5.0 – 7.0 tonne per day of MSW generated which about 30 - 35% is an organic fraction. Upon separation, the organic fractions were digested into biogas through anaerobic. At the maximum conversion of organic fraction, about 775 kWh of electricity may able to generate from the waste. In this study, the complete biorefinery setup and utilize organic components from the MSW generated in UPM was proposed that the biogas subsequently will be used to produce green energy in the form of electricity or cooking fuel.

Solar pavement technology has numerous benefits for advanced life and environmental protection, including reduced fossil fuel usage, reduction harmful emissions from conventional electricity generation and handy reliable electricity via solar energy. This paper aims to find an alternative for cost effective renewable energy sources is in conjunction with the principles of sustainability. This research studies whether the application of thermal energy harvesting road pavement using sustainable conductive piping such as stainless steel, copper, and aluminium are feasible in Malaysia. The scope of the paper is to optimize the suitable parameters for different materials of thermal energy harvester such as pipe material, pipe depth inserted into pavement, types of pipe arrangement, pipe spacing, and flow rate for maximum thermal energy extraction using numerical simulation. The simulation is testing under engineering software ANSYS Workbench 19.2 (Fluent) and Solidworks 2020 to develop project prototype from optimize thermal energy harvester. Thus, serpentine copper pipe shows the highest heat efficiency which is 32.22% with the temperature outlet of 327.35K (54.21°C) at the pipe located at 50 mm from the surface pavement with the pipe spacing of 80 mm centre-to-centre.

Hb Adana is a non-deletional α-thalassaemia variant, due to mutations in α1- or α2-globin codon 59 (αCD59) that produce unstable α-globin. Clinical appearance can range from silent carrier to blood transfusion reliance, hepatosplenomegaly, skeletal deformities, and spinal cord compression. Despite the importance of Hb Adana inheritance, this Hb variant is challenging to study since molecular tests are scarce and routine diagnosis can be missed. This study explored the distribution of Hb Adana among local high school students and evaluate the hematological parameters and haemoglobin analysis of Hb Adana in this region of Malaysia. This retrospective study included 13,721 blood samples from high school students enrolled in Malaysia's National Thalassaemia Screening Program at Hospital Raja Perempuan Zainab II (HRPZ II). Multiplex Gap PCR was used to detect deletional α-thalassaemia. Common non-deletional α-thalassaemia was detected using multiplex ARMS PCR. Evaluable data were retrieved from the HRPZ II database. Results: A total of 2327 subjects exhibited common deletional (n=1037, 44.6%) and non-deletional (n=1290, 55.4%) α-thalassaemia. Hb Constant Spring was the most frequent non-deletional α-thalassaemia. Thirty-one participants (1.33%) had αCD59α/αα and one (0.04%) had αCD59α/-α3.7. The 32 Hb Adana subjects were 87.5% Malay, and 12.5% Orang Asli. Additionally, seven cases of HbE/Hb Adana were discovered. The haemoglobin level in heterozygous Hb Adana ranged from mild anaemia to normal, 95.0 g/L to 153.0 g/L. The MCV and MCH were approximately 73 fL and 23 pg, respectively. Conclusions: We have denoted the distribution of alpha thalassaemia mutation patterns among high school students in Kelantan, Northeast Peninsular of Malaysia. Our observation showed Hb Adana was rarely uncommon in our region and the co-inheritance with an α-gene deletion generates α+-thalassaemia; with HbE, α0-thalassaemia. All heterozygous Hb Adana exhibited low MCVs and MCHs.

The research analysed the publications metric of literature regarding the impact of socially responsible investing (SRI) and environmental, social, and governance (ESG) on portfolio and financial performance. The study aimed to determine the latest trends, key themes, authors, and influential journals. Data from the SCOPUS database was used in this study. A total of 1377 research articles from academic journals related to this topic and published from 2013 to 2022, they data was cleaned to remove duplicate, and documents that do not meet the criteria of this study. For this bibliometric analysis, a total of 260 articles were chosen in order to summarise the collective knowledge and emerging patterns in ESG, SRI, ethical, and impact investing, a bibliometric analysis was employed. The thematic map classified the ESG, SRI, and performance relationship themes into four categories of themes: niche themes, motor themes (corporate financial performance, corporate social performance, ESG, ESG factors, sustainability, performance, integrated reporting, gender diversity, and board size), emerging or declining themes (social responsibility, environmental performance, socially responsible investment, ethical investment, and SRI), and basic or transversal themes (financial performance, corporate social performance, ESG performance, environmental, social, and governance). Social responsible investing, engagement, and ESG, implies a position between niche themes and highly developed topic/emerging or decreasing theme, and covid, ROA, while, tobin’s Q, implies a position between highly developed topic/emerging or decreasing theme and basic theme. The findings contribute to the enhanced understanding of ESG, SRI, ethical, and impact investing, which are crucial for an efficient capital market in promoting sustainability and sustainable development. The study offers vital practical implications and future research directions.

Thermal plasma technique is becoming prominent in the treatment of variety of waste ranging from municipal solid waste, incinerator residue, hospital waste, electronics waste and industrial sludge. Application of the new treatment technology to petroleum sludge requires information on the nature and characteristics of the sludge that will be use to optimize the treatment system. In this investigation, petroleum sludge obtained from Petronas Melaka was characterized for its physical and chemical features. Proximate and ultimate analysis as well as determination of elemental composition were carried out. The sludge was found to contain high moisture (78.91%), low ash (5.06%), low volatiles (5.52%) and high fixed carbon (10.51%). The sludge has a TOC of 54.48% and HHV of 23.599MJ/kg. Despite the high moisture content, the higher heating value (HHV) is high when compared to literature values. The high value of HHV may be associated with the high fixed carbon, low ash content and high value of TOC. The apparent density of the sludge is slightly lower. Fourteen heavy metals are detected in significant quantities. Proper waste management that will safely dispose the sludge is required. The waste disposal technique should take into cognizant the possibility of leaching of heavy metals into ground water on one hand and the gasification of lighter ones on the other.

The resource curse indicates that economic growth performs poorly in countries with significant natural resources. Nevertheless, certain countries rich in energy managed to protect their resource riches in the long run. It is necessary to enforce effective policies in resource-rich countries to fully leverage the advantages which can come from the abundance of natural resources. This study aimed to evaluate how oil-rich countries would avoid resource flows by successful fiscal and management policies. By taking the guidance of Norway and implementing fiscal policy focused on tax rules on its oil management, it is proposed that oil-exporting countries benefit significantly. The framework attempts to mitigate this resource curse and utilise oil revenues in the interest of the country.

Virtual Histology- Intravascular Ultrasound (VH-IVUS) image is an available method for visualizing plaque component to detect thin cap fibroatheroma. Nevertheless, this imaging modality has considerable limitations to extract the plaque component features and identifying the TCFA plaque. The aim of this paper is to improve the identification of TCFA using fusion of IVUS and VH-IVUS images. In order to generate the automatic technique for reducing the human interaction, a new method namely Active Contour based Plaque Border Detection (ACPB) is proposed. In order to perform the pixel wise classification, hybrid of K-means algorithm with Particle Swarm Optimization and Plaque based Minimum Euclidean Distance (KMPSO-PMED) method is presented to classify the plaque region as well. Moreover, to obtain more significant information of imaging modalities, fusion of two different images consisting of VH-IVUS and IVUS is performed. Therefore, geometric features are extracted from the plaque region and combine with IVUS features. Furthermore, different group of plaque features are divided by means of the histopathological studies. SVM classifiers is applied to detect the TCFA and non-TCFA plaques. The proposed method is applied on 566 in-vivo IVUS and their matching VH-IVUS images obtained from 9 patients. The best result of SVM illustrates the accuracy rates of 99.41% for classification of TCFA plaque. The results prove that the highest accuracy is achieved by integrated features of IVUS and VH-IVUS images.

We report on the study of energy-harvesting performance in medium-size (400 cm²) glass-based semitransparent solar concentrators employing edge-mounted photovoltaic modules. Systems using several different types of glazing system architecture and containing embedded diffractive structures are prepared and characterized. The technological approaches to the rapid manufacture of large-area diffractive elements suitable for use in solar window-type concentrators are described. These elements enable the internal deflection and partial trapping of light inside glass-based concentrator windows. We focus on uncovering the potential of pattern-transfer polymer-based soft lithography for enabling both the improved photon collection probability at solar cell surfaces, and the up-scaling of semitransparent solar window dimensions. Results of photovoltaic characterization of several solar concentrators employing different internal glazing-system structure and diffractive elements produced using different technologies are reported and discussed.

Salmonella sp. is a globally prevalent organism responsible for causing salmonellosis, a foodborne illness. Salmonella Typhimurium represents a type of Salmonella sp. not associated with typhoid fever but capable of causing stomach and intestinal inflammation or severe infection. In the present study, 150 uncharacterized proteins of S. Typhimurium were randomly selected from UniProtKB and analyzed using TMHMM, PROSITE, STRING, DEG, and BLASTp. Results indicated that 32 uncharacterized proteins (21%) were predicted to be transmembrane proteins involved in various biological pathways. Among them, 30 transmembrane proteins were predicted to be essential and non-host homologous. This study's findings suggest their potential as drug targets against salmonellosis.

The Ali-Cesaro Stolz theorem, introduced in this paper, extends the classical Cesaro-Stolz theorem by addressing cases where the latter does not yield results or provides a "Does Not Existe (DNE) form. This novel theorem leverages the properties of limits and Z-transforms, offering a robust framework for analyzing sequences and series. The theorem is particularly effective in scenarios where traditional approaches fail, providing new insights and tools for mathematical analysis. This paper presents a detailed formulation of the Ali-Cesaro Stolz theorem, including proofs, applications, and a discussion on its implications and advantages over existing methods.

Background: Young adults, particularly university students might be at greater risk of developing psychological distress, and exhibiting symptoms of anxiety and depression during the COVID-19 pandemic. Objective: The primary objective of this study was to explore and compare the determinants and predictors of mental health (anxiety and depression) during and after COVID-19 lockdown among university students. Methods: This was an observational, cross-sectional study with a sample size of 417 students. An online survey utilizing International Physical Activity Questionnaire–Short Form (IPAQ-SF), General Anxiety Disorder–7 (GAD-7) and Patient Health Questionnaire-9 (PHQ-9) was distributed to Universiti Tunku Abdul Rahman students via Google forms. Results: During lockdown, family income [χ² (1, n=124) = 5.155, p=0.023], and physical activity [χ² (1, n=134) = 6.366, p=0.012] were associated with anxiety, while depression was associated with gender [χ² (1, n=75) = 4.655, p=0.031]. After lockdown, family income was found to be associated with both anxiety [χ2 (1, n=111) = 8.089, p=0.004], and depression [χ2 (1, n=115) =9.305, p=0.002]. During lockdown, family income (OR=1.60, p=0.018), and physical activity (OR=0.59, p=0.011) were predictors for anxiety, and gender (OR=0.65, p=0.046) being the only predictor for depression. After lockdown, family income was a predictor for both anxiety (OR=1.67, p=0.011), and depression (OR=1.70, p=0.009). Conclusion: Significant negative effects attributed to the COVID-19 lockdown, and certain factors predisposed to the worsening of mental health status in university students. Family income, physical activity level, and gender were some of the major determinants that influenced the anxiety and depression.

Immunosensors have been widely developed to use antibodies to detect a pathogen of interest; it is interesting to look at the effect of nonspecific antibody binding to E. coli using electrochemical methods. IgG antibody not specific to E. coli O157:H7 was crosslinked onto a screen-printed carbon electrode. The presence of E. coli at 4, 4 × 10², 4 × 10⁵, and 4 × 10⁸ CFU/mL on the electrode surface was detected via linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS). Current transfer at both electrodes was reduced as the concentration of bacteria increased; however, the calibration of number of cells to decreased current was nonlinear for IgG-modified electrodes. The nonlinearity is confirmed by EIS measurements which showed highest impedance at 4 CFU/mL E. coli when impedance should be the lowest. FESEM images showed higher binding of cells when IgG is present compared to electrodes with reduced graphene oxide (rGO) alone. Electrodes with rGO alone show less attachment of E. coli, with EIS showing a linear calibration profile, while LSV shows not much difference in current values for all concentrations aside from the highest concentration. These results suggest that nonspecific binding can provide false signals in electrochemical measurements, and it is crucial to provide proper controls.

The sustainability of ecotourism is the backbone of tourism development of a country. Ecotourism can contribute to both conservation and development in which involves dynamic relationship between tourism, biodiversity and communities, facilitate by great management. The purpose of this study is to analyze the dimensions of the socio-economic and environmental impacts of ecotourism in communities surrounding the Tasik Kenyir in Terengganu, Malaysia. This study provides a framework for the development and evaluation of ecotourism. The framework will determine if the relationships between indicators are positively correlated which will result in positive contribution to the other by using System Dynamic. Socio-cultural and economic data will be collected through interviews and group discussions in selected communities in Tasik Kenyir. Data on wildlife will be extracted from secondary data from Kenyir Research Institute, Universiti Malaysia Terengganu. The data analysis will explore the socio-cultural and economic differences between and within different communities due to ecotourism development, the contribution of ecotourism to conservation activities, local support for conservation and ecotourism as well as the influence of tourist activities on the distribution of wildlife species in Tasik Kenyir. This study aims to contribute toward understanding the natural resource community-ecotourism inter-relationship and help to bridge the knowledge gap that hinders biodiversity conservation initiatives. The findings will be used as a base for further development of ecotourism and will recommend alternative management options where necessary for the study area.

The There are many factors influencing the performance of photovoltaic (PV) systems. Among these factors, temperature and solar radiation are two major parameters that have a large effect on the efficiency of PV systems. The cell temperature of PV panels is related to the ambient temperature while the solar radiation incident on the surface of the PV modules depends on the slope and azimuth of these modules. Furthermore, ground reflectance (albedo) affects the irradiance incident on the PV panel surface, which in turn affects the output of a PV system. Nevertheless, the effects of these factors on the economic performance of the solar PV systems are scarcely reported. This paper presents a complete design of a stand-alone PV/battery system to supply electric power for a mobile base station in Choman, Erbil, Iraq. The effects of different factors on the total electricity produced by PV arrays and its economic performance are simultaneously investigated. HOMER software has been used as a tool for the techno-economic and environmental analysis. As indicated from the simulation results, the PV array capacity and its economic performance are highly affected by the variation of the slope and azimuth. With a base case (albedo of 20% and average annual ambient temperature of 11°C), the best feasible system which is achieved by facing PV due to south with a tilt angle of 40° or 45°, is found to have net present cost (NPC) of 70595 $ and cost of energy (COE) of 0.54 $/kWh. Moreover, the results indicate that increasing the ground reflectance from 10% to 90% results in a 7.2% decrease in the PV array capacity and about 3% decrease in the NPC and COE. On the other hand, increasing the ambient temperature from 0°C to 40°C results in a 19.7% increase in the PV array capacity and an 8.2% increase in the NPC and COE. Furthermore, according to the ambient temperature of Choman, using PV modules with high sensitivity to temperature is found to be an attractive option. Provided simulation performance analysis proves that the studied parameters must be treated well to establish an enabling environment for solar energy development in Iraq.

Dengue has long been a serious health burden to the global community, especially for those living in the tropics. In spite of the availability of vaccines, effective treatment for the infection is still needed and currently remained absent. In the present study, antiviral properties of the KSF 103 ME which consisted of a number of potential antiviral compounds were investigated against DENV-2. The effects of this extract against DENV-2 replication were determined using the qRT-PCR. Findings from the study suggested that the KSF 103 ME showed maximum inhibitory properties toward the virus during the virus entry stage at concentrations of more than 12.5 µg/mL. Minimal antiviral activities were observed at other virus replication stages; adsorption (42% reduction at 50 µg/mL), post-adsorption (67.6% reduction at 50 µg/mL), prophylactic treatment (68.4% and 87.7% reductions at 50 µg/mL and 25 µg/mL, respectively) and direct virucidal assay (48% and 56.8% reductions at 50 µg/mL and 25 µg/mL, respectively. The KSF 103 ME inhibited dengue virus repication with an IC50 value of 20.3 µg/mL and SI value of 38.9. The KSF 103 ME showed potent antiviral properties against DENV during the entry stage. Further studies will be needed to deduce the antiviral mechanisms of the KSF 103 ME against DENV.

Mechanochemical production of copper (II) isonicotinate Metal-Organic Framework ([Cu (INA)2]-MOF) and its modified magnetic iron composite ([Cu (INA)2]-MOF@Fe3O4]) allowed for the adsorptive removal of Terbutaline from water. A variety of characterization techniques, including Fourier, transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM), were used to elucidate the distinct chemical and morphological features of the two advanced materials. The optimal adsorption conditions were determined by investigating a wide range of adsorption-related variables, including contact time, initial Terbutaline concentration, adsorbent dosages pH, and temperature. The chemistry involved in the adsorption process between the adsorbents and the adsorbate molecules was evaluated using the best-fitting models, such as kinetics, isotherms, and thermodynamics, and the regeneration study was performed to evaluate the adsorbents' reusability. Incredibly maximum adsorption capacities (Qmax) of 1667 and 2500 mg L-1 were attained within 40 minutes under alkaline pH 11 by the [Cu (INA)2]-MOF and the [Cu (INA)2]-MOF@Fe3O4, respectively. The adsorbents have been proven to be good for the adsorption of Terbutaline as a priority pollutant in an aqueous solution, with pseudo-first order and Langmuir as the best-fitting models for the kinetic and isotherm models respectively.

The Imbalance Cost Pass-Through (ICPT) is a flexible component of the Incentive Regulation (IBR) that empowers power producers to adjust tariffs in response to variable fuel prices, thereby enhancing the economic resilience of electricity generation. However, the cost of electricity generation is significantly influenced by the volatility of commodity prices, including coal, gas and LNG. In Malaysia, the Energy Commission has conducted biannual reviews of fuel and other generation costs. Any cost savings or increases identified during these reviews will be passed on to customers in the form of rebates or surcharges. Due to that reason, this study proposes ICPT price forecasting for the electricity market in Peninsular Malaysia. The study aims to construct an ICPT-related baseline model for the peninsular generation data by employing three forecasting methods. The forecasting performance is analysed by a Mean Absolute Percentage Error (MAPE). In findings, the ARIMA method is one of the most accurate forecasting methods for fuel prices compared to the Moving Average (MA) and LSSVM methods. The observed price differences between the ARIMA and LSSVM models for ICPT are minimal. The ICPT price for July-December 2022 and January-June 2023 is MYR 0.21/ kWh for ARIMA and MYR 0.18/kWh for LSSVM, which are close to the actual TNB’s ICPT tariff. As for the forecasting, the ICPT price is expected to drop for the next announcement. The findings of this study may contribute to a positive impact on the sustainability of the energy sector in Malaysia.

In its 8th Malaysia Plan (MP*), the Malaysian government has given nanotechnology development a high priority and has been made a Strategic Research (SR) programme. Consequently, an exhaustive and long-term approach is essential. Additionally, specific laws are required to provide an optimal health and safety environment for workers. Consequently, the current study intends to assist Malaysian policymakers in promoting improved safety, risk assessment, and management for nanotechnology workplaces, as well as drafting a comprehensive policy for the recently released DOSH guideline in 2018. Utilizing a unique methodology, this study evaluated the assessment and management of nanotechnology health and safety risks in Malaysia using the international risk governance council (IRGC) framework. In addition to document analysis, n = 20 semi-structured interviews were conducted with representatives of several nanotechnology platforms to collect data that was then analyzed thematically. The research evaluated current workplace safety regulations and laws. Consequently, we propose a future dynamic strategy for Malaysian nanotechnology with more favourable upgrades supported by increased concentrations in the following areas: I policy creation, ii) comprehensive management system, iii) knowledge transfer, and iv) infrastructure management. In addition, the findings highlight the need of cross-sectional communication in bridging existing gaps. This study laid the groundwork for a more systematic and comprehensive health and safety strategy.

The present study drops the line for the flow characteristics of fly ash-based (FA) geopolymers reinforced with polypropylene (PP) fibers undergoing the extrusion process during three-dimensional printing. Applying to the Herschel-Bulkley rheological model the research is ready with the sound theoretical basis which is used to understand the flow behavior of these materials under various conditions. A combination of experimental and numerical techniques that are based on the Finite Element Method (FEM) in COMSOL has been used in this study. The results of both the experimental and simulation approaches are then compared and the behavior of the material during extrusion is then examined. The experimental results proved PP fiber content has significant effects on rheological properties. The experiments on mixes which are either devoid of fibers or possess a high content of fiber, encountered problems like a high static yield stress and material segregation. Mixes with fibers of moderate content showed smoother extrusion processes, which means that a suitable range of fiber addition exists for the fibers that optimally balance the mechanical properties and extrudability. Numerical simulations typically agreed with experimental data for fiber contents up until it reached a certain level but not above, suggesting the existence of more complex interactions inside the fibers and the necessity for the subsequent model refinements. The investigation outlines a 0.25% and 0.5% fiber content range that leads to enhanced performance without bringing the extrusion process to greater complications and further making the production of proper, architecturally printed structures possible.

The purpose of this study was to investigate the effect of chitosan (CS) and Alginate (Alg) polymers concentrations and CaCl2 concentration on metronidazole (MET) drug loading (LE), size particles and zeta potential. Nanocomposites were prepared by ionotropic pregelation method. A (21 *31 *21) *3= 36 full factorial design (FFD) was used to predict statistical equation and responses. The MET-CS-AlgNPs nanocomposites were characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, thermal gravimetric analysis, scanning electron microscope and in vitro drug release studies. All data indicated the presence of drug into MET-CS-AlgNPs nanocomposites. The release profile of MET-CS-AlgNPs nanocomposites was found to be sustained

Synthesis and antitumour activity of a palladium compound, [Bis (quinoline) palladium (II) chloride] (coded as NH1) alone and in combination along with its proposed mechanism of action has been described in the present study. Antitumour activity has been performed in seven different cancer cell lines using colorimetric 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay. The investigated palladium compound demonstrated superiority over clinical standard cisplatin against drug resistant ovarian cancer cell lines. NH1 also demonstrates 4.4 times greater activity than cisplatin against breast cancer model. Binary sequenced combination study showed that NH1 in combination with curcumin is mostly additive to antagonistic. However, combination of NH1 with 6-shogaol demonstrated synergism depending on dose and sequence. Proteomic study revealed that changes in expression of 14 proteins were significantly associated with anticancer mechanism of NH1. In vivo anticancer activity of NH1 at a dose of 0.75 mg/kg was also evaluated using Erlich Ascites Carcinoma (EAC) cell lines in Swiss-albino mice model. Preliminary toxicity study in Swiss-albino mice proved that NH1 is comparatively less toxic at both of the administered doses, either 2.5 mg/kg or 5 mg/kg. However, cisplatin demonstrated significant toxicity at both of the administered doses. Biochemical investigations also supported that NH1 demonstrated lesser toxicity profile towards liver or kidney compared to clinical standard cisplatin.

Background: Two years after the first cases, critical gaps remain in identifying prognostic factors in multisystem inflammatory syndrome in children (MIS-C). Methods: This retrospective study included 99 patients with MIS-C hospitalized between August 2020 and March 2022 in a pediatric tertiary center. The patients were divided into two groups according to clinical severity (low and high-risk). Prognostic values of baseline clinical and laboratory characteristics were evaluated with advanced statistical analysis, including machine learning. Results: Sixty-three patients were male, and the median age was 83 (3–205) months. Fifty-nine patients (%59.6) were low-risk cases. Patients aged six years and over tended to be at higher risk. Involvement of aortic or tricuspid valve or >1 valve was more frequent in the high-risk group. Mortality in previously healthy children was 3.2%. Intensive care unit admission and mortality rate in the high-risk group were 37.5% and 7.5%, respectively. At admission, high-risk patients were more likely to have reduced lymphocyte count and total protein level and increased brain natriuretic peptide (BNP), ferritin, D-dimer, and troponin concentrations. The multiple logistic regression model showed that BNP, total protein, and troponin were associated with higher risk. When the laboratory parameters were used together, BNP, total protein, ferritin, and D-dimer provided the highest contribution to the discrimination of the risk groups (100%, 89.6%, 85.6%, and 55.8%, respectively). Conclusions: Our study widely evaluates and points to some clinical and laboratory parameters that, at admission, may indicate a more severe course. Modeling studies with larger sample groups are strongly needed.

The prominent cultivation of lemongrass relies on the pharmacological incentives of its essential oil. The lemongrass essential oil (LEO) has a significant amount of citral (mixture of geranial and neral), isoneral, isogeranial, geraniol, geranyl acetate, citronellal, citronellol, germacrene-D, and elemol in addition to numerous other bioactive compounds. These components confer various medicinal activities to LEO including antifungal, antibacterial, antiviral, anticancer, and antioxidant properties. These attributes are commercially exploited in pharmaceutical, cosmetics, and food preservations industries. Furthermore, the employment of LEO in the treatment of cancer opens a new vista in the field of therapeutics. Although different LEO components have shown promising anticancer activities in vitro, these effects have not been assessed yet in humans. Further studies on the anticancer mechanisms exerted by lemongrass components are required. The present review intends to provide a timely discussion on the relevance of lemongrass extracts in cancer and health treatment, and in food industry applications.

With global climate change and resource constraints looming large, sustainable design has become a focus of attention for all industries. The purpose of this study was to investigate the attitudes and behavioural intentions of undergraduate fashion design students towards sustainable fashion practices. Undergraduate fashion design students (n = 441) from three universities in Guangdong Province, China, participated in this survey. By constructing different scales of environmental knowledge, attitude towards sustainable fashion practice and behavioural intention towards sustainable fashion practice, and by using structural equation modelling to analyse the relationship between environmental knowledge and sustainable fashion practice, the following conclusions were drawn: (1) environmental knowledge has a positive effect on attitude towards sustainable fashion practice (p＜0.05); (2) environmental knowledge has a positive effect on behavioural intention towards sustainable fashion practice (p＜0.05); (3) Subjective norms has a positive effect on behavioural intention towards sustainable fashion practice (p＜0.05). (4) Attitudes towards sustainable fashion practice play a mediating role in the relationship between environmental knowledge and intentions towards sustainable fashion practice behaviour (p＜0.05). The findings of this study have implications for environmental education for undergraduate fashion design students and for sustainable production in companies.

The abstract summarizes the transformative impact of artificial intelligence (AI) on employment in Malaysia, highlighting the need for comprehensive strategies to ensure inclusivity and equitable access to AI-driven opportunities and digital skills training. It addresses the research problem of potential inequalities and marginalization among vulnerable populations due to uneven distribution of AI-related employment opportunities and training. The research objectives focus on developing decentralized strategies tailored to rural communities and marginalized groups, alongside evaluating policy interventions for equitable access. The literature review provides theoretical frameworks emphasizing skill development, understanding structural shifts, fostering inclusive innovation, and promoting collaborative governance. Future research directions include implementing and evaluating strategies in real-world contexts, exploring technological solutions, conducting qualitative research on individuals' experiences, and adopting interdisciplinary approaches. Overall, a multidimensional approach combining theoretical insights, empirical evidence, and stakeholder engagement is essential for developing inclusive and sustainable solutions to harness AI's potential for the benefit of all Malaysians.

Joining of aluminium alloys to steels has been extensively studied, especially in the automotive sector. However, aluminium alloys are known to be difficult to join with steels when methods involving fusion welding are used because of hot cracking problem. Hence, a high strength joint between these dissimilar metals would be of benefit especially in reducing the weight of products. In this work the torch brazing method was applied to join AR500 steel with AA7075 aluminium alloy using Al-Si-Zn base filler metal at various flame times. The effect of the brazing work on the intermetallic phase formation and the mechanical strength of the joints were investigated. In this work, the maximum shear load obtained was 6460 N and the presence of the intermetallic phases had reduced the shear strength of the brazed joints. However, the torch brazing process using Al-Si-Zn filler metal had successfully facilitated the joining of these dissimilar metals.

Thyroid hormones have a catabolic effect on bone homeostasis. Hence, this study aimed to evaluate serum vitamin D, calcium, and phosphate and bone marker levels and bone mineral density (BMD) among patients with different thyroid diseases. This cross-sectional study included patients with underlying thyroid diseases (n=64, hyperthyroid; n=53 euthyroid; and n=18, hypothyroid) and healthy controls (n=64). BMD was assessed using z-score and left hip and lumbar bone density (g/cm2). Results showed that the mean serum vitamin D Levels of all groups was low (<50 nmol/L). Thyroid patients had higher serum vitamin D levels than healthy controls. All groups had normal serum calcium and phosphate levels. The bone marker levels were significantly high in the hyperthyroid group and low in the hypothyroid group. The z-score for hip and spine did not significantly differ between thyroid patients and control groups. The hip bone density was remarkably low in the hyperthyroid group. In all groups, the serum vitamin D levels were below the cutoff value. However, thyroid patients had a higher serum vitamin D level than healthy controls. The carboxy terminal collagen crosslink and procollagen type I N-terminal propeptide levels were high in hyperthyroid patients and low in hypothyroid patients. Further, hyperthyroid patients had a low hip BMD.

Differences in metabolic regulation among obesity phenotypes, specifically metabolically healthy obese (MHO) and metabolically unhealthy obese (MUO) women, may lead to varied responses to interventions, which could be elucidated through metabolomics. Therefore, this study aims to investigate the differences in metabolite profiles between MHO and MUO women and the changes following a lifestyle intervention. Serum from 36 MHO and 34 MUO women, who participated in a lifestyle intervention for weight loss were analyzed using an untargeted proton nuclear magnetic resonance spectroscopy (1H NMR) at baseline and 6 months post-intervention. Anthropometric, clinical and dietary intake parameters were assessed at both time points. Both groups showed differential metabolites profile at baseline and sixth month. Seven metabolites including trimethylamine-N-oxide (TMAO), arginine, ribose, aspartate, carnitine, choline and tyrosine significantly changed between group post-intervention, in which all showed a decreasing pattern in MHO. Significant reduction in body weight and BMI in the MUO correlated with changes in carnitine and tyrosine levels. In conclusion, metabolite profiles differed significantly between MHO and MUO women before and after a lifestyle intervention. Changes in carnitine and tyrosine levels in MUO correlated with weight loss, suggesting potential targets for therapeutic intervention.

Election Algorithm (EA) is a powerful metaheuristics model motivated by phenomena of the socio-political mechanism of the presidential election conducted in many countries. EA is selected as a topic of discussion due to its capability and robustness to carry out complex problems in the random-2SAT logic program. This paper utilizes a hybridized EA assimilated with the Hopfield neural network (HNN) in carrying out random logic program (HNN-R2SATEA). The efficiency of the proposed method was compared with the existing traditional exhaustive search (HNN-R2SATES) model and the recently introduced HNN-R2SATICA model. From the result obtained, clearly proven that based on our proposed hybrid model outperformed other existing model based on the Global Minima Ratio (ZM), Mean Absolute Error (MAE), Bayesian Information Criterion (BIC) and Execution Time (ET). The expected outcome portrays that the EA algorithm outperformed the other two algorithms in doing random-kSAT logic program. The results proved the robustness, effectiveness, and compatibility of the HNN-R2SATEA model.

Bioconvective flows have attracted attention in recent years due to actual and potential applications. In this paper, we consider a steady and laminar convective MHD flow of a nanofluid with heat, mass and microorganism transfer with a heat source/sink present. In addition, we assume there exists a first order chemical reaction. The governing partial differential equations (PDEs) are reduced to ordinary differential equations (ODEs) using the scaling group transformation and the associated boundary value problem is then solved. The influences of selected governing parameters on the dimensionless velocity, temperature, nanoparticle concentration, density of motile microorganisms, skin friction, heat transfer, mass transfer, and motile microorganism density rates are computed and discussed

Purpose: For businesses of all sizes, turnover is a significant issue that has a detrimental impact on organizational performance. This study investigates the variables influencing SME workers' intentions to leave their current employers. This study also examines the moderating effect of organizational commitment on the relationships between attitude, subjective norms, perceived behavioral control, and turnover intentions. Methodology: Six hypotheses were proposed regarding the connections between the initial TPB components and organizational commitment. Results: The PLS-SEM structural path analysis findings revealed that the three fundamental predictors of TPB significantly influence turnover intention, with perceived behavioral control most strongly influencing intention. Furthermore, the results revealed that organizational commitment moderated the relationship between TPB constructs and turnover intention. Practical Implications and Originality: This study used an extended TPB model to introduce fresh perspectives into the literature on SME workers' organizational commitment.

The detection of Fasciola eggs in ruminant fecal samples typically occurs around 15 weeks post-infection during patent infections. The recent introduction of coproantigen ELISA (cELISA) diagnostics, which capture antigenic enzymes in fecal material, holds promise for monitoring Fasciola fecal egg count (FFEC) to implement control programs, particularly targeted treatments. This study compared two study groups, those with positive FFEC (FFEC+ve) and negative FFEC (FFEC-ve), to assess the sensitivity of Flukefinder sedimentation and a cELISA kit. This study reports that the coproantigen ELISA detection limit was 4.5 eggs per gram (epg) for a 100% positivity rate. Additionally, a moderate, statistically significant positive correlation (r²=0.716, p-value < 0.01) and an odds ratio of 1.96 (p-value < 0.01) were observed between FFEC and Fasciola coproantigen from cELISA. This implies that for every single unit increase in FFEC, there is a 96% likelihood of obtaining a higher optical density (OD) reading from the cELISA test. The results suggest that cELISA can complement fecal sedimentation tests, serving as a valuable tool for detecting cattle with high FFEC. This capability facilitates targeted treatment strategies, thereby aiding in the control and prevention of the spread of fasciolosis within the studied area.

Differentiated instruction has been implemented in classrooms where students who come from various backgrounds require appropriate lessons that are tailored to their varied learning preferences. As the spread of coronavirus 19 (Covid-19) is becoming more rampant, online learning has been lifted up as the main platform of teaching and learning, forcing the need to shift from the conventional face-to-face classroom to online, or virtual, mode of knowledge transfer. Having such global phenomenon affecting education, how does it affect the implementation of differentiated instruction that has been practised regularly by teachers before the wake of Covid-19? Previous studies have shown how it is done in the normal classroom setting, and that the practice of differentiated instruction contributes to students’ motivation as well as academic performance. However, there is a need to explore how do teachers go about with online differentiated instruction and how does it affect the students, since online learning poses various threads to both teachers and students; and thus, one might argue the effectiveness of not only the teaching approach but also the overall teaching and learning outcomes. Borg’s framework of teacher cognition, which has been extensively used in exploring how teachers teach, can be utilized to document the practice of online differentiated instruction. This study aimed to explore the practice of online differentiated instruction by teachers and examined its impact on students’ motivation and academic performance during the Covid-19 outbreak. The participants of this study consists of 247 gifted students from a public school in Malaysia. To meet these aims, this study employed a mixed method research design, utilizing the framework of teacher cognition to explore the teachers’ practice of online differentiated through interviews; and, utilizing a survey design using a questionnaire to determine the impact of online differentiated instruction towards students’ motivation and academic performance. The findings revealed that although online differentiated instruction is feasible, however, appropriate combination of differentiation constructs need to be applied in order to achieve higher motivation and better academic performance among the students.

Nanofibres have gained increasing attention due to their advantages of having a high porous structure, narrow pore size and distribution, and a high specific surface area. One of the most efficient techniques for producing nanofibres is via electrospinning. Nanofibres are currently being used in various fields, including water filtration. Although nanofibres possess the ability to filter various components, the fibres generally have a low mechanical strength that can mitigate the performance over time. Therefore, in overcoming this issue, several studies have focused on improving the strength of the nanofibre membranes for a water filtration application. This review discusses the advantages and challenges of nanofibres for water filtration membranes and summarises the methods to increase the strength of the membranes, including solvent vapour, thermal treatment, and chemical crosslinking.

Assessment of the trends of land cover and vegetation dynamics (VD) using remote sensing (RS) and indicators such as anthropogenic activities and the socio-demographic information is essential in order to make proper planning for sustainable management. This paper attempts to evaluate land cover change (LCC) and VD in Kebbi State, Nigeria using historical Landsat data from 1986-2016 by means of remote sensing. The Driver-Pressure-State-Impact-Response (DPSIR) framework was later employed using both primary and secondary data for a better understanding of the drivers, the state of the environmental condition, the causes as well as the impact of the change. The images were classified into five thematic land cover classes as Dense Vegetation, shrubs/built area, farmland, bare/grassland and water body by means of Maximum likelihood supervised classification technique in accordance with Anderson classification scheme level 1, with acceptable accuracy. Pre-classification and post-classification change detection (CD) methodologies were executed using Normalized difference vegetation index (NDVI) and Image differencing respectively. The study illustrates a steady decline in dense vegetation and shrubs/build areas while farmland and bare/grassland increases, however, water bodies remain unchanged. The DPSIR pin-point that the major drivers of change in the study area have been the pressing need for farming land as the population grows and socioeconomic demands including fuelwood consumption and endemic poverty. Expansion of Farming land, fuelwood consumption and the need for construction materials are identified as the main key elements exerting pressure for the change. The state of the condition indicates a steady decline in dense vegetation and shrubs areas while farmland and bare/grassland are increasing significantly. The impacts include land degradation, the decline in the provision ecosystem goods and services, biodiversity loss through loss of habitats. The study, however, noted that many international and national policies in response to land degradation are channelled toward land restoration and remediating of the environment, through afforestation programs and improving the livelihood of the rural people through providing alternative income sources since they depend heavily on land for sustenance. However, the state governments, communities and individual commonly organized annual tree planting campaign with the main purpose of environmental protection.

The purpose of this study was to recommend to the government about the appropriate land use based on geoelectric and hydrochemical works. The results were supposed to be used as models for effective land use. During the study, a groundwater survey using a geoelectrical method was conducted and was used to map an aquifer flow. In general, Solok groundwater mapping was meant to provide information necessary to optimize follow-up activities for the use of clean water. It was also intended to minimize the negative impacts of exploitation and utilization of groundwater. This research aimed to provide information on groundwater conditions in Solok. It focused on the survey of groundwater sources, the inversion of measurement data on Sclumberger electrode configuration geoelectric in thirteen districts, and chemical analysis of pH, Fe, Nitrite, and DHL. The results show there was a great potential for groundwater-unconfined aquifers.

Dietary pattern (DP) and its relationship with disease biomarkers has received recognition in nutritional epidemiology investigations. However, DP relationships with adipokines (i.e., adiponectin and leptin) among breast cancer survivors remain unclear. Therefore, we assessed relationships between DP with high molecular weight (HMW) adiponectin and leptin concentration among breast cancer survivors. This cross-sectional study involved 128 breast cancer survivors who attended the oncology outpatient clinic at two main government hospitals in East Coast of Peninsular Malaysia. The serum concentration of HMW adiponectin and leptin were measured using enzyme-linked immunosorbent assay (ELISA) kits. Reduced rank regression method was used to analyze DP. Relationships between DP with HMW adiponectin and leptin were examined using regression models. Findings showed that a one-unit increase in the ‘energy-dense, high-saturated fat and low-fiber’ DP z-score was associated with a 0.41 µg/mL lower HMW adiponectin (95% CI: -0.806, -0.014) which was independent of age, BMI, cancer stage, duration since diagnosis, education level and occupation status. A similar relationship with leptin concentration was not observed. In conclusion, ‘energy-dense, high-saturated fat and low-fiber’ DP, which is characterized by high sugar-sweetened drink and fat-based spread but low intake of fruits and vegetables, is an unhealthy dietary pattern and unfavorable for HMW adiponectin concentration but not for leptin. These findings could serve as a basis in developing specific preventive strategies that are tailored to the growing population of breast cancer survivors.

A biofilm is any syntrophic consortium of microorganisms in which cells adhere to one another and, in some cases, to a surface. These adherent cells become encased in a slimy extracellular matrix made up of extracellular polymeric substances (EPSs). Until now, the use of commercial disinfectants remains the main strategy to control biofilm-mediated problems. This mini review summarizes common antibiofilm mode of actions taken by disinfectants and how water channels in microbial biofilms contribute to disinfectant resistance.

Moringa oleifera is a miracle plant with many nutritional and medicinal properties. Chemopreventive value of the combined mixture of moringa leaves and seed residues (MOLSr) at different ratios (M1S9, M1S1 and M9S1) were investigated. MOLSr extracts were subjected to phytochemical screening, antioxidant assays, metabolite profiling and cytotoxic activity on various human cancer cell lines including primary mammary epithelial cells (PMEC). The MOLSr ratio with the most potent antiproliferative activities were used in xenograft mice injected with MDA-MB-231 cell lines for in vivo tumourigenicity study as well as protein and gene expression studies. M1S9, specifically comprised of saponin and amino acid, retained the lowest antioxidant activity and highest glucosinolates content as compared to other ratios. Cell viability decreased significantly in MCF-7 breast cancer cells and PMEC after treatment with M1S9. Solid tumour from MDA-MB-231 xenograft mice was inhibited up to 64.5% at third week after treatment with high-dose M1S9. High-dose M1S9 significantly decreased the expression of calcineurin (CaN) and vascular endothelial cell growth factor (VEGF) proteins as well as the secreted frizzled-related protein 1 (SFRP1) and solute carrier family 39 member 6 (SLC39A6) genes. This study provides new scientific evidence for the chemoprevention properties of MOLSr in breast cancer model.

Rhenium Disulfide (ReS2) has evolved as a novel 2D transition-metal dichalcogenide (TMD) material which has promising applications in optoelectronics and photonics because of its distinctive anisotropic attributes. In this review, we emphasize on formulating saturable absorbers (SAs) based on ReS2 to produce Q-switched and mode-locked pulsed lasers of diverse operation wavelengths like 1 μm, 1.5 μm, 2 μm, and 3 μm. We outline ReS2 synthesis techniques and integration platforms concerning solid-state and fiber-type lasers. We discuss the laser performance based on SAs attributes. Lastly, we draw conclusions and outlook by recommending additional improvements for SA devices so as to advance the domain of ultrafast photonic technology.

This article presents an overview of the philosophical and theoretical foundations of the Family Resilience, The Resiliency Model of Family Stress, the Adjustment, and Adaptation Model in families caring for the elderly, The Concept of Religious Coping and its application in order to strengthen family resilience. It is based on the phenomenon the increasing elderly population worldwide has become a global problem, along with the fact that the extension of life expectancy in a person is also accompanied by a decrease in function due to degenerative processes, that require complex health care services. So far, the family is still the primary care setting of choice in the care of the elderly. However, as an informal caregiver, the family also has many limitations that cause the burden of caring for the elderly to become a source of stress in itself. Hence, it impacts the quality of care and the quality of life of the elderly themselves. Meanwhile, from various sources, it is known that religious coping is one of the sources of overcoming stress. So that a strategy is needed to strengthen family resilience in accepting the responsibility of health care for the elderly with a religious coping approach.

Abstract: The empirical soil loss model, RUSLE, was used with a conjunction of remotely sensed data and geographic information system technology to delineate the soil erosion and watershed priorities in terms of conservation practices at seven boundary sub-watersheds (labeled as SW-00, SW-01, …, SW-06) between Iraq and Iran at Ali Al-Gharbi area, southern Iraq. The six factors of the RUSLE model, ie. the rainfall erosivity, the soil erodibility, the slope steepness length, the crop management, and management practice, were calculated or estimated using information from different data sources such as remotely sensed data and previous studies. The finding showed that the annual soil erosion loss ranges from 0 - 1890 (tons h-1 y-1) with an average of 0.66 (tons h-1 y-1). Values of soil erosion were classified into five classes: very low, low, moderate, high, and very high. The potential soil loss in the high and very high classes ranges from 14.84 to 1890 (tons h-1 y-1), and these classes occupy only 27 km2 of the study area, indicating that the soil loss is very low in the area being examined. In terms of the spatial distribution of soil loss, the northern and northeastern parts (mountains and hills) of the sub-watersheds where the slope is steeper are more likely to erode than the plain area in the southern and southeastern portions, indicating that slope, in addition to rainfall erosivity, has a dominant effect on the soil erosion rate. The study of soil erosion in the watersheds under consideration reveals that only the northern portions of the SW-00, SW-02, and SW-04 watersheds require high priority conservation plans; however, these portions are primarily located in mountain regions, making conservation plans implementation in these areas impractical. Due to low soil loss, other sub-watersheds, particularly SW-01, SW-03, SW-05, and SW-06, are given low priority.

Endoplasmic reticulum (ER) is an important organelle responsible as protein synthesis regulator in plant. High salinity can also lead to the activation of ER stress, caused by the accumulation of misfolded protein. This could lead to a stress response mechanism, unfolded protein response (UPR). Failure of UPR to reverse the effect of protein misfolding will activate Programmed Cell Death (PCD). Metacaspase genes regulate programmed cell death (PCD) in plants. The present study was focused on comprehensive gene analyses of the expression patterns of type II rice metacaspase (OsMC) genes in response to the endoplasmic reticulum (ER) and salinity stress in rice leaf and OsMC4 in callus. A strong evidence of unfolded protein response (UPR) during tolerance to both ER and salinity stress was found in the present study. Overexpression of OsMC4 in rice callus as a fusion protein with TagRFP and controlled by the CaMV35 promoter caused major changes in the expression of the stress ER-marker genes, protein disulfide isomerase (PDI) and Binding immunoglobulin Protein (BiP), and OsMC4 in overexpressing calli. These expression analyses of the OsMC family provide valuable information for further functional studies on the biological roles of OsMCs in PCD related to ER and salinity stress responses.

The Ranau Earthquake that struck on 5, June 2015 and follow by February 2018 and April 2021, were a new disaster in Sabah and caused many Sabahan to panic. The unpredicted disaster also caused a serious impact on all aspects of life in Sabah. The earthquake has caused severe damage to eight primary schools in the vicinity of the epicenter; although no casualties were reported. However, the disaster has passing deep psychological effects among students. In this study, we examine how the primary school teachers enabled the student to be resilient during and after the disaster. Based on the interviews of 16 primary school students it was revealed that most of the teachers used WhatsApp to support resilience during and after the earthquake. Interviews with 16 primary school teachers revealed there were two main reasons for them to communicate with students namely, delivering emotional aid and monitoring their stress. Based on student interviews, five content categories of emotional support were identified: caring, reassuring, emotion sharing, belonging, and distracting. The main contribution of this study is social media can be used as a spontaneously and proactive tool to support student's resilience during and after the earthquake trauma.

Electrification coverage in Sarawak is the lowest at 78.74%, compared to Peninsular Malaysia at 99.62% and Sabah at 82.51%. Kapit, Sarawak with its 88.4% populations located in rural areas and mostly situated along the main riverbanks has great potential to generate electrical energy by hydrokinetic system. Yearly water velocity data is the most significant parameter to perform hydrokinetic analysis study. Nevertheless, the data retrieved from local river databases are inadequate for river energy analysis, thus hindering its progression. Instead, flow rates and rainfall data had been utilised to estimate the water velocity data. This signifies no estimation of water velocity in an unregulated river by using water level data had been made. Therefore, a novel technique of estimating the daily average water velocity data in unregulated rivers is proposed. The modelling of regression equation for water velocity estimation was performed and two regression model equations were generated to estimate both water level and water velocity on-site and proven to be valid as the coefficient of determination values had been R² = 87.4% and R²=87.9%, respectively. The combination of both regression model equations can be used to estimate long-term time series water velocity data for type-C unregulated river in remote areas.

The ameliorative effect ethanolic extract of M. oleifera (MO) leaves in combination of curcumin against seizures, cognitive impairment & oxidative stress PTZ-induced kindled rats. Molecular docking was performed to predict the potential phytochemical of MO and curcumin against Epilepsy. The effect of pretreatment with leaves of M. oleifera ethanolic extracts (MOEE) (250, 500mg/kg, orally), curcumin (200 and 300 mg/kg, orally), valproic acid used as standards (100mg/kg) and combined effect of MOEE (250mg/kg) and curcumin (200mg/kg) at low dose, on pentylenetetrazole (PTZ)-induced kindling. For the development of kindling the individual Wistar rats (Male) were injected pentyletetrazole (40 mg/kg, i.p.) on every alternate day. Molecular Docking has been done by AutoDock4.2 tool to merge the ligand orientations in the binding cavity. From the RCSB website, the crystal structure of Human Glutathione reductase (PDB ID: 3DK9) was obtained. Curcumin and MOEE showed dose-dependent effect. The combined effects of leaves of MOEE & curcumin significantly improved the seizure score and decreased the number of myo-clonic jerks in compare with standard dose of valproic acid. PTZ kindling induced a significant oxidative stress and cognitive impairment which was reversed by pretreatment with MOEE & curcumin. Glutathione reductase (GR) is an enzyme, which plays key role in the cellular control of reactive oxygen species (ROS). Therefore, activating GR can uplift the antioxidant property, which leads to the inhibition of ROS induced cell death in brain. The combination of ethanolic extract of M. oleifera (MOEE) leaves and curcumin have shown better result than any other combination for antiepileptic effect by virtue of antioxidant effects. As per docking study showed that the chloro-genic acid and quercetin is treated with the combination of curcumin can be much more potential.

The information on the land use and soil conservation practice based on year 2006, 2010 and 2014, hence offering an opportunity to model the impacts of land use change on erosion, deposition and surface water runoff. Limitation in the use of hydrological models had been their inability to handle the large amount of input data that describe the heterogeneity of the natural system. In this study, a procedure that takes into account soil conservation practice based on the land use change, the response of soil erosion and sediment export from the George Town Conurbation catchment area, and average annual sediment yields were estimated for each grid cell of the watershed to identify the critical erosion areas of rural and urban planning proposes. Average annual sediment yield and data on a grid basis estimated using Universal Soil Loss Equation (USLE) and an emerging technology represented by Geographic Information System (GIS) used as a tool to produce a map for erosion rate. The changing of the land use from forest to agriculture and then to an urban area is a challenging task to research on land use demand for population, and environmental impact assessment is important for the planning of natural resources management, allowing research the modification of land use properly and implement more sustainable for long term management strategies. The challenge is to formulate strategies that would promote an integrated approach to the land use planning at an appropriate level as to address the issues that arose. Modelling for creating urban growth boundary for the George Town Conurbation must have to be controlled surface runoff and soil loss and sediment export from land use of the George Town Conurbation catchment.

In this paper, Rice water requirement and irrigation water requirement in Amol agro meteorological Station in 2016-2045 are forecasted based on the projected meteorological data of Hadcm3 under A2 scenario. Rice water requirements are estimated by using crop coefficient approach. Reference evapotranspiration are calculated by FAO Penman-Monteith method. Moreover, the irrigation water requirements are simulated by calibrated CROPWAT model using the meteorological parameters. The results show that both crop water requirement and irrigation water requirement present downward trend in the future. In 2016-2045, the rice water requirement and irrigation water requirement decrease by more than 9.9% under A2 scenario, respectively. Furthermore, the precipitation rise may be the main reason for the decrease in crop water requirement, while significant decrease of irrigation water requirement should be attributed to combined action of rising precipitation and a slight increase in temperature.

Populaces are prominent indicators of livability in creating ‘street life’ for cities and public spaces. Evaluating people’s experiences is significant in creating a city liveliness and urban heritage trail. The exploration of design strategies that could allow them to integrated and connected with other spaces in the context of city and heritage as well as creating a social life among them. The measuring variables are people’s experience on the spaces; thus, create the pattern of behavior, which cause spaces liveliness, using Kuala Lumpur Heritage Trail as an example of pedestrian priority streets, city environment and heritage value. The aim of this research is to evaluate people’s experiences and analyze their behavior towards the urban street design within cities environment and Malaysia heritage values. The analyzed review comprising on the livability of the street in the context of interrelation between behavioral patter of people and the preferences of urban heritage. Hence, this paper will give an understanding of how people experiences the presence of urban streets and heritage values, thus, bringing liveliness to the streets.

Extensive research has been conducted on printable antenna technologies, believed to be fast-growing due to their significant impact on wireless devices. It is necessary to study the progress of printable antenna technology as they are core devices for wireless technology today. This review work offers a comprehensive account of the previous and recent research achievements based on the principle of printable antenna, and parametric studies of several key design parameters, for future wireless network applications. The systems considered for evaluation include broadband techniques, large Bandwidth, high gain, dual/multi-band, or reconfigurable structure, low-profile, size-reduction, compact, linear, or circular polarization applications. It also highlights the fabrication procedures, and the numerous material characteristics affecting the antenna performance for various wireless applications with design considerations. Fully printed antennas on different substrates and conductive ink were investigated, including polyethylene terephthalate (PET), synthetic paper (Teslin), resin-coated photo paper, and Kapton polyimide substrates, among many others. The findings show that the fully inkjet-printed antenna made fabrication easy, improving the accuracy and conductivity of the printed patterns by concentrating on the inherently difficult problems and opportunities. Inkjet-printed antennas are believed to be the futuristic demand for sustainability and wireless solution in several ways.

This study investigates the impact of climate change on the efficiency of organic honey production in Türkiye using a machine learning approach. The eXtreme Gradient Boosting (XGBoost) algorithm is employed for the Machine Learning (ML) modelling. The analysis includes data on organic honey production performance from 2004 to 2023, spanning a period of 20 years, and 8 different climate variables (16 variables depending on daytime and nighttime values). The dataset created to investigate the impact of climate change on organic honey yield comprises 28 columns and 120,960 rows. The study aimed to determine the significance of different climatic variables on the efficiency of organic honey production. The study found that, in addition to daytime solar radiation and temperature, wind speed and direction were also important factors. The sensitivity analysis has shown that minor alterations in the variables have a significant impact on the model's predictions. Additionally, non-linear relationships between the variables and honey production were identified. These findings suggest that it may be beneficial to consider implementing climate change adaptation and mitigation strategies in agricultural policies and beekeeping practices. The study suggests that machine learning has the potential to provide valuable insights into the complex relationship between climate change and agricultural production. This could aid in the sustainability and economic optimization of the sector.

Abstract: Heavy metals (HMs) contamination is one of the main among abiotic factors affecting crop productivity and also threatens human health via consuming metal contaminated crops as a food source. Over the past few years, HMs have drawn a lot of attention due to their increased use for commercial purposes and their harmful effects on plants and other life forms, thus threatening human survival. However, in recent years, several methods have been adopted to combat the harsh effects of HMs. After phytohormones, use of mineral nutrients such as selenium (Se) in the prevention of HM stress has been explored by the researchers more recently. Selenium is an important micronutrient widely known for its antioxidant properties in both plants and animals. Exogenous Se inhibits metal uptake and its translocation and also improves the antioxidant system, thus imparts resistance to HM toxicity in plants. Moreover, Se also regulates the production of various osmolytes in cells that helps in developing cell osmolarity. Selenium also induces the production of different types of secondary metabolites (SMs) that are also involved in plant's secondary defense mechanisms to different stresses. Uptake of mineral nutrients is a vital process for plant growth and development, which is also positively correlated with Se under metalloid toxicity. However, in order to understand the exact mechanism of Se in HM tolerance, different metabolic processes stimulated by Se and their pathways need to be explored. Hence, this review focuses on the role of Se on nutritional status, antioxidants metabolism, interaction with phytohormones and its role in the regulation of various genes involved in Se induced HM tolerance. Thus, this study will help researchers in the future for the improvement of HM tolerance via Se application in plants.

Abstract: The effect of some weather parameters (rainfall and temperature) on the production of oil palm in Peninsular Malaysia was investigated. Data were analysed using the Statistical Package for Social Sciences (SPSS 20.0 version), with descriptive statistics, time series analysis, and multiple linear regression (MLR) carried out. SPSS and Microsoft Excel 2010 were used to analyse the results. The MLR model determined the strength of the relationship between oil palm yield (dependent variable) and the changing variables of temperature and rainfall (independent variables). The regression output returned three components; regression coefficients, regression statistics and ANOVA. The findings of the study revealed medium to high rainfall variability at the rate of 0.0008. This implies that rainfall is increasing over time with variations in its amount and intensity. As rainfall increases oil palm FFB production is predicted to increase at a slow rate of 0.0009. The estimation of average annual temperature indicated an increase of 5.6℃ at the rate of 0.0357℃ per year with a temperature maximum of 32.01℃ and minimum of 25.45℃. The result also revealed an increase in oil palm yield at the rate of 0.2581 per year with a mean value of 176247.6. Overall, there is a significant difference in the impact of rainfall and temperature on oil palm yield. This signifies that rainfall has a significant impact on oil palm yield (FFB) compared to temperature.

Agroforestry practices evolve with the development of basic and advanced facilities, changes in natural and artificial factors of land use change. The study aims to examine the socioeconomic characteristics and compare satisfaction levels across forest products and vegetable farming of the agroforestry community in Khost Province. Data were collected from 662 farmers and was analyzed using univariate Analysis of Variances (ANOVA) and Multivariate Analysis of Variances (MANOVA). The results found that forest and vegetable products, including fruits, berries, herbs, mushrooms, wild animals, oils, wood, honey, okra, eggplant, carrot, cucumber, pine nuts, pepper, and timber has different impact in terms of satisfaction with basic and advanced facilities, knowledge about land use and impacts, natural and artificial factors of land use change, and positive and negative impact of land use change. The limitation of the study included an absence of exogenous factors in the model such as climate change, financial conditions, market fluctuations, regulatory system, an area in which the study is selected, research design, and current condition of endogenous factors. Overall, agroforestry practices can improve the socioeconomic development of agroforestry-dependent communities in Khost Province, Afghanistan. This study provided useful insights for policymakers and development practitioners to promote agroforestry practice adoption and improve the socioeconomic development of agroforestry-dependent communities. Future works could explore the implications of agroforestry practices on the socioeconomic development of other dependent communities in Afghanistan.

In this study, the effects of music therapy on anxiety for patients undergoing regional anaesthesia in an operating room was succinctly investigated. This investigation was largely based on the adapted Hospital Anxiety and Depression Score (HADS) and Spielberger State-Trait Anxiety Inventory (STAI-S), of patients undergoing regional anaesthesia in an operating room. A randomized control trial was performed on 90 patients due for surgery. The selected patients for regional anaesthesia were allocated to either the music therapy group who listened to music using headphones for the entire surgery or the no-treatment control group. Based on the findings, it has been conclusively demonstrated that music can decrease the patient's anxiety level. According to the socio-demographic evaluation, elderly patients have the highest stress hormones levels when compared to young patients. Although elderly patients are more likely to choose religious songs to help them relax, cortisol analysis revealed an increase in cortisol levels among the elderly compared with younger patients. As a result, music is especially important to be delivered to elderly patients. Nonetheless, there is no restriction against administering music to elderly patients because evidence from the Hospital Anxiety and Depression Score (HADS) and State-Trait Anxiety Inventory (STAI-S) has shown that music helps to shift their attention away from pain and complications and makes them feel tranquil. Similarly, the HADS and modified Spielberger STAI (STAI-S) analyses demonstrate a substantial outcome for both groups, with respondents responding positively. The study found that listening to music during regional anaesthesia might help people feel less worried.

Glass samples (59.5 – x) B2O3 – 20Na2O – 20CaO – xV2O5 – Er2O3 – 0.5AgCl (x = 0 – 2.5 mol%) were prepared using melt – quenching method to investigate the structural and optical properties of the glass. The structural of the glass were characterized by using XRD, TEM and FTIR, meanwhile the optical properties were characterized by UV – VIS absorption. The XRD patterns confirmed the amorphous nature of the prepared glass samples. FTIR confirmed the presence of VO4, VO5, BO3, and BO4 vibration, and this result showed NBO increased with increasing vanadium concentration. The UV – Vis – NIR spectra exhibits six absorption band centered at 490, 520, 540, 660, 800, and 980 nm. The optical band gap (Eopt), Urbach energy and refractive index shown decrease, increase and increase, respectively. The Judd – Ofelt intensity parameter reveal the trends was Ω2 &gt; Ω4 &gt; Ω6. There are three emission bands at 516 nm, 580 nm, and 673 nm which are represented by 2H11/2 – 4I15/2, 4S3/2 – 4I15/2, and 4F15/2 – 4I15/2, respectively under 800 nm excitation was obtained.

Biofilms are complex communities of microorganisms that adhere to surfaces and develop a protective matrix. The colonization of devices in the food and health care industries by microbial biofilms poses numerous risks. Existing antimicrobial agents often fail to penetrate the biofilm matrix, allowing the pathogen to grow and persist. The objective of this study was to evaluate the impact of MADIO PRO+ multipurpose disinfectant on Salmonella Typhimurium biofilm using crystal violet assay and FTIR spectroscopy. Results demonstrated that MADIO PRO+ multipurpose disinfectant significantly (p<0.05) inhibited biomass of S. Typhimurium biofilm and altered the structure of S. Typhimurium biofilm. In conclusion, MADIO PRO+ multipurpose disinfectant offers an advantage in biofilm control strategy. This discovery could help the food and health care industries to plan better microbial intervention strategies.

Heavy metals pollution in the Straits of Malacca warrants the development of rapid, simple and sensitive assays. Enzyme-based assays are excellent preliminary screening tool with near real-time potential. The heavy-metal assay based on the protease ficin was optimized for mercury detection using Response Surface Methodology. The inhibitive assay is based on ficin action on the substrate casein and residual casein is determined using the Coomassie dye-binding assay. Heavy metals strongly inhibit the hydrolysis. A Central Composite Design (CCD) was utilized to optimize detection. The results show a marked improvement for the concentration causing 50% inhibition (IC50) for mercury, silver and copper. Compared to One-factor-at-a-time (OFAT) optimization, RSM gave an improvement of IC50 from 0.060 (95% CI, 0.0300.080) to 0.017 (95% CI, 0.0160.019), from 0.098 (95% CI, 0.0770.127) to 0.028 (95% CI, 0.0220.037) and from 0.040 (95% CI, 0.035.045) to 0.023 (95% CI, 0.0200.027), for mercury, silver and copper, respectively. A near real-time monitoring of mercury concentration in the Straits of Malacca at one location in Port Klang was carried out over a 4-h interval for a total of 24 h and validated by instrumental analysis with the result revealing an absence of mercury pollution in the sampling site.

This paper reports on the optimization of thin-film coating assisted self-sustainable off-grid hybrid power generation systems for cattle farming in rural areas of Bangladesh. Bangladesh is a lower middle-income country with declining rates of poverty among its 160 million people due to persistent economic growth in conjunction with balanced agricultural improvements. Most of the rural households adopt a mixed farming system by cultivating crops and simultaneously rearing livestock. Among the animals raised, cattle are considered as the most valuable asset for the small/medium-scale farmers in terms of their meat and milk production. Currently, along with the major health issue, the COVID-19 pandemic is hindering the world’s economic growth and has thrust millions into unemployment; Bangladesh is also in this loop. However, natural disasters such as COVID-19 pandemic and floods, largely constrain rural smallholder cattle farmers from climbing out of their poverty. In particular, small and medium-scale cattle farmers face many issues that obstruct them from taking advantage of market opportunities and imposing a greater burden on their families and incomes. An appropriate measure can give a way to make those cattle farmers’ businesses both profitable and sustainable. Optimization of thin-film coating assisted self-sustainable off-grid hybrid power generation system for cattle farming is a new and forward-looking approach for sustainable development of the livestock sector. In this study, we design and optimize a thin-film coating assisted hybrid (photovoltaic-battery-generator) power system by using the Hybrid Optimization of Multiple Energy Resources (HOMER, Version 3.14.0) simulation tool. An analysis of the results has suggested that the off-grid hybrid system is more feasible for small and medium-scale cattle farming systems with long-term sustainability to overcome the significant challenges faced by smallholder cattle farmers in Bangladesh.

MPC (Magneto-Photonic Crystal) Optimisation is a feature-rich Windows software application designed to enable researchers to analyze the optical and magneto-optical spectral properties of multilayers containing gyrotropic constituents. A set of computational algorithms aimed at enabling the design optimization and optical or magneto-optical (MO) spectral analysis of 1D magnetic photonic crystals (MPC) is reported, together with its Windows software implementation. Relevant material property datasets (e.g., the optical spectra of refractive index, absorption, and gyration) of several important optical and MO materials are included, enabling easy reproduction of the previously published results from the field of MPC-based Faraday rotator development, and an effective demonstration-quality introduction of future users to the multiple features of this package. We also report on the methods and algorithms used to obtain the absorption coefficient spectral dispersion datasets for new materials, for which the film thickness, transmission spectrum, and refractive index dispersion function are known.

Polycystic ovary syndrome (PCOS) is a common endocrine disorder in women, characterized by fluid-filled sacs in the ovaries and various symptoms including high androgen levels, endometrial irregularities, and cysts. While the cause of PCOS is unknown, it has been linked to genetic, endocrine, and metabolic factors, and there are several treatment options, including lifestyle modifications, medications, and surgery. Natural products, such as medicinal plants and fruits, are being explored as potential treatments for PCOS due to their bioactive compounds with pharmacological effects related to antioxidant, antimicrobial, anticancer, and antidiabetic properties. Some of these compounds improve insulin sensitivity, reduce inflammation, and enhance glucose metabolism, which is beneficial for women with PCOS. This review examined the effects of natural products on PCOS, including their effects on ovarian histological changes, blood glucose, sex hormones, and lipid profile, based on animal and human studies. This study suggests that the use of natural products as complementary medicine can be a promising resource for the development of effective therapeutics for PCOS, but that further research is needed to fully understand their benefits

In the past decades, Fiber Reinforced Concrete has been gaining more attention in the concrete research development. There are many advantages of the inclusion of fiber into reinforced concrete structures. It was found that the inclusion of fibers in concrete, be it synthetic or natural, resulted in the improvement of the thermal properties of concrete, as well as its strength to some extent. However, the inclusion of fibers in concrete does affects its thermo-mechanical properties. The objective of this study is to identify the potential of the addition Polypropylene and Kenaf fibers in cement mortar at different compositions (0.1%, 0.2%, and 0.3%). Eight mixes were analyzed for this purpose. Upon investigating the flow ability, compressive strength, tensile strength, and thermal conductivity of the mortar samples, it was found that the incorporation of PP and Kenaf fibers reduced the flow ability. Cement mortar samples containing 0.1% addition of PP and Kenaf fibers show the highest compressive strength compared to other percentages, while samples containing 0.3% addition of PP and Kenaf fibers show the highest tensile strength compared to other percentages. The thermal conductivity of mortar samples shows reduction when high percentages of both fibers were used.

Demand for nutmeg essential oil in Indonesia and the world is increasing. Nutmeg essential oil is obtained from young nutmeg seeds extracted by water steam distillation (WSD). The weakness of the extraction process with WSD is the long distillation time (24 hours), wasteful of fuel, wasteful of manpower, produces polluting gases which damage the environment and requires a lot of water as a coolant. The purpose of this study was to compare the WSD and SCFE methods for extracting nutmeg essential oil. The research was conducted by extracting nutmeg essential oil using two methods are WSD and SCFE. The results showed that the chemical composition of the nutmeg essential oil produced by the two methods was almost similar. Nutmeg essential oil produced by both methods shows the same characterization. The yield between the two methods is almost the same, in the range of 10-12% using extraction time 15-60 minutes. The SCFE method has advantages over WSD are a faster extraction time, does not require heating materials and CO2 gas can be reused. In conclusion, SCFE is an alternative method to increase the production of nutmeg oil.

Transitioning towards sustainable food systems and sustainable diets is critical in reducing environmental impact and achieving the Sustainable Development Goals established by the United Nations General Assembly. This transition requires collaborative efforts across multiple stakeholders, including the general public’s knowledge and attitudes. To assess the knowledge and attitudes towards food sustainability we carried out a cross-sectional study among Kuwait University students with a total of 278 participants aged ≥18 years (78% females and 22% males). A validated questionnaire was used for this study. Most respondents (&gt;70%) recognized the concept of “local food” and “environmental impact.” The concept “green water-blue water” was least recognized among respondents (75%). Participants perceived that a sustainable diet was rich in vegetables, included plenty of fresh products and was affordable. Participants (&gt;66%) perceived that a positive impact of meat and its derivatives towards sustainability, a misconception most common among males. Overall, participants with more knowledge about environmental concepts showed favorable attitudes towards a sustainable diet. Women showed more interest in changing their current dietary habits towards food sustainability. In conclusion, despite participants’ positive attitude towards food sustainability, lack of understanding persists, necessitating public health interventions aimed at educating consumers about sustainable diets and its impact on the environment.

Crop digital twin is redefining traditional farming practices, offering unprecedented opportunities for real-time monitoring, predictive and simulation analysis, and optimization. This research embarks on an exploration of the synergy between precision agriculture, crop modeling, and regression algorithms to create a digital twin for augmenting farmers the concentration and composition prediction-based crop nutrient recovery. This captures the holistic representation of crop characteristics, considering the intricate relationships between environmental factors, nutrient concentrations, and crop compositions. However, the complexity arising from diverse soil and environmental conditions makes nutrient content analysis expensive and time-consuming. This paper presents the result of a predictive digital twin case study that employs six regression algorithms namely Elastic Net, Polynomial, Stepwise, Ridge, Lasso, and Linear Regression to predict rice nutrient content efficiently, particularly considering the coexistence and composition of multiple nutrients. Our research findings highlight the superiority of the Polynomial Regression model in predicting nutrient content, with a specific focus on accurate nitrogen percentage prediction. This insight can be used for nutrient recovery intervention by knowing the precise amount of nutrient to be added into the crop medium. The adoption of the Polynomial Regression model offers a valuable tool for nutrient management practices in the crop digital twin, potentially resulting in higher-quality rice production and a reduced environmental impact. The proposed method can be replicable in other low-resourced crop digital twin system.

The rural road landscape is crucial in forming rural areas' landscape character (LC). As a platform for portraying the rural landscape, the rural roads demonstrate the area's unique natural and cultural characteristics to the visitors. However, with the continuous development of rural areas, the rural LC has been severely impacted, thus impacting visitors' visual experience. In order to preserve and protect the rural landscape, this study aims to assess the visual quality of rural road landscapes based on public preference and heatmap analysis. The results indicated that most of the participants had a higher level of preference for rural landscapes with open horizontal views represented by agricultural areas such as paddy fields. It was also found that different paddy field characters based on their planting stages can also positively affect the visual quality of rural road landscapes. The study also revealed that rural LCs with roadside settlements, commercial structures, mixed agricultural crops, and vegetation received low preference ratings. These characters negatively impact the visual quality of the rural road landscape. These findings provide significant insight for planners and decision-makers regarding protecting and preserving the essential rural road landscapes for the rural tourism experience.

A challenging problem in the aquaculture industry is bacterial disease outbreaks which results in the global reduction of fish supply and foodborne outbreaks. Biofilms in marine pathogens protect against antimicrobial treatment and host immune defence. Zeolites are minerals of volcanic origin made from crystalline aluminosilicates which are useful in agriculture and in environmental management. In this study, silver ion-exchanged zeolite A of four concentrations; 0.25M (AgZ1), 0.50M (AgZ2), 1.00M (AgZ3)and 1.50M (AgZ4) were investigated for biofilm inhibition and antimicrobial properties against two predominant marine pathogens V. campbelli and V. parahemolyticus by employing the Minimum Inhibitory Concentration(MIC), Crystal Violet Biofilm Quantification assays as well as Scanning Electron Microscopy. In the first instance, all zeolite samples AgZ1-AgZ4 showed antimicrobial activity for both pathogens. For V. campbellii AgZ4 exhibited the highest MIC at 125.00 µg/ml while for V. parahaemolyticus the highest MIC was observed for AgZ3 at 62.50 µg/ml. At sublethal concentration, biofilm inhibition of V. campbelli and V. parahemolyticus by AgZ4 were observed at 60.2% and 77.3% inhibition respectively. Scanning electron microscopy exhibited profound structural alteration of the biofilm matrix by AgZ4. This is the first known study that highlights the potential application of ion-exchanged Zeolite A against marine pathogens and their biofilms.

A major health threat for children in the 21st century is physical inactivity in conjunction with the elevated prevalence of obesity. In Malaysia, low physical activity among children is a major concern. The objective of the study was to analyze the day to day variation of step count in a sample of obese children using the activPAL^TM monitor. This was a cross sectional study conducted in Kuala Terengganu, Terengganu. The sample compromised 41 boys and 24 girls between the ages of 9-11 years. Number of steps was objectively measured using an activPAL^TM accelerometer over a period of 4-7 days and had their height and weight measured. Mean step count from this sample of obese children was 8861 ± 3157steps. Steps per day were significantly higher for boys compared to girls (p=0.034). Obese children took significantly more steps at weekdays than on weekends (p=0.001). Steps/hour were significantly higher in weekday compared to weekend between 0600 to 0700 (p<0.001), 0700 to 0800 (p<0.001), 0800 to 0900 am (p<0.001), 0900 to 1000 (p=0.032), 1000 to 1100 (p=0.046), 1100 to 1200 (p<0.001), 1300 to 1400 (p=0.002), 1400 to 1500 (p<0.001), 1800 to 1900 (p=0.026) and 2000 to 2100 (p=0.019). Detailed daily patterns of physical activity are required to fully understand the differences across days that help future interventions to target those falling short particularly during weekend.

Ag/TiO₂ thin films were prepared using the sol-gel spin coating method. The microstructural growth behaviors of the prepared Ag/TiO2 thin films were elucidated using real-time synchrotron radiation imaging, its structure determined using grazing incidence X-ray diffraction (GIXRD), its morphology imaged using the field emission scanning electron microscopy (FESEM), and its surface topography examined using the atomic force microscope (AFM) in contact mode. Cubical white spots were detected, identified as Ag, while the TiO₂ thin film resembles a porous ring-like structure with each ring coalescing and forming channels. Junction growth is directly proportional with time under continuous heating conditions (annealing), and its growth orientations and patterns were seemingly random.

Sustainable diet behaviour is crucial in ensuring food security and healthy life with low environmental impacts, for the present and future generations. However, sustainable diet is a new concept both globally as well as in Malaysia. Therefore, this study aimed to adapt and validate a questionnaire on sustainable diet behaviours, as well as to assess the levels and willingness of sustainable diet behaviour and its association with socio-demographic characteristics among university students in a public university in Malaysia. The final questionnaire resulted in three factors (perceived effectiveness, local/ seasonal food and behavioural control). The questionnaire displayed acceptable factor loadings (0.57 - 0.79) with total variance of 50.4% in the Exploratory Factor Analysis and demonstrated relative fitness in the Confirmatory Factor Analysis. These findings showed that the adapted questionnaire was valid and could be used in the assessment of sustainable diet behaviour among young adults. In the survey, the participants showed moderate positive sustainable diet behaviour. Females and Indian participants were more likely to purchase seasonal / local foods and choose sustainable food products (p<0.05). Participants in the preparation and action stage for sustainable diet behaviour had higher scores in all three factors individually or combined. The findings should be used as the basis for future studies among the general population and intervention programs in promoting sustainable diet behaviour in the country.

The SLC12 family of cation-chloride-cotransporters (CCCs), comprising potassium chloride cotransporters (KCCs)-mediated Cl- extrusion relative to sodium chloride cotransporters (NKCCs)-mediated Cl- loading, play vital roles in cell volume regulation and ion homeostasis. These functions of the CCCs influence a variety of physiological processes, many of which overlap with the pathophysiology of cardiovascular disease. Although not all of the cotransporters have been linked to Mendelian genetic disorders, recent studies have provided new insights into their functional role in vascular and renal cells along with their contribution to cardiovascular diseases. Particularly, an imbalance in potassium levels promote the pathogenesis of atherosclerosis and disturbances in sodium homeostasis are one of the causes of hypertension. Recent findings even suggest hypothalamic signalling as a key signalling pathway in the pathophysiology of hypertension. In this review, we summarize and discuss the role of CCCs in cardiovascular disease with particular emphasis on knowledge gained in recent years on NKCCs and KCCs.

Capital structure decision plays an imperative role in firm’s performance. Recognizing the importance, there has been many studies inspected the rapport of capital structure with performance of firms and findings of those studies are inconclusive. In addition, there is relative deficiency of empirical studies examining the link of capital structure with performance of banks in Bangladesh. This paper attempted to fill this gap. Using panel data of 22 banks for the period of 2005-2014, this study empirically examined the impacts of capital structure on the performance of Bangladeshi banks assessed by return on equity, return on assets and earnings per share. Results from pooled ordinary least square analysis show that there are inverse impacts of capital structure on bank’s performance. Empirical findings of this study is of greater significance for the developing countries like Bangladesh because it will call upon concentration of the bank management and policy makers to pursue such policies to reduce reliance on debt and to accomplish optimal level capital structure. This research also contributes to empirical literatures by reconfirming (or otherwise) findings of previous studies.

A study of photovoltaic solar window technologies is reported, focusing on their structural features, functional materials, system development, and suitability for use in practical field applications, e.g. public infrastructures and agricultural installations. Energy generation performance characteristics are summarized and compared to theory-limit predictions. Working examples of pilot-trial solar window-based installations are described. We also report on achieving electric power outputs of about 25 W_p/m² from clear and transparent large-area glass-based solar windows.

Finding sustainable renewable energy sources for energy conversion and management is still an obscure topic. This paper presents a model-based simulation for an energy conversion system using piezoelectric energy harvester (PEH) technology. A dynamic mathematical model of a PEH device consists of a piezoelectric transducer, a controlled PWM rectifier, and a closed-loop buck boost converter is developed. A piezoelectric transducer converts mechanical vibrations from a wind force into an oscillating train of electrical charges. The sinewave peak-to-peak level relationship describes the changeable values of these charges, which depend on the severity of the wind vibration. The controlled PWM rectifier, in conjunction with a closed-loop buck-boost converter, converts this train of sinewave cycles into DC voltages. The control blocks of the closed-loop buck-boost converter use the perturbation and observation (P&amp;O) algorithm based on maximum power point tracking (MPPT), which adapts the operational voltage of the piezoelectric source to deliver the maximum power to load and improves the PEHS output voltage stability. A simulation program is employed to perform mathematical analysis on various wind vibration scenarios, piezoelectric sources without PWM converters, and piezoelectric vibration sources connected to a closed-loop P&amp;O converter. The crucial results of this paper demonstrate that the proposed dynamic PEHS model effectively feeds low-power electronic loads by directly adjusting the output voltage level to the set voltage, even under different vibration severity levels. As a result, the proposed PEHS dynamic model serves as a guideline for researchers in the development of self-powered sensors, which contributes to understanding sustainable energy alternatives.

Coffee is rich in phenolic acids, such as caffeic acid and chlorogenic acid (CGA). Polyphenol-rich diets have been shown to reduce the risk of metabolic syndrome (MeTS). Background and Objectives: This systematic review and meta-analysis discusses the effects of coffee consumption and its dose-response on MeTS parameters. Materials and Methods: PubMed and Scopus® were searched for relevant articles published between 2015 and 2020. This review focused on randomised controlled trials (RCTs) investigating the effect of coffee consumption on anthropometric measurements, glycaemic indices, lipid profiles, and blood pressure. Data from relevant studies were extracted and analysed using random, fixed, or pooled effects models with 95% confidence intervals (CIs). Results: Green coffee extract (GCE) supplementation (180 to 376 mg) was found to reduce waist circumference (weighted mean difference (WMD) = -0.39; 95% CI: -0.68, -0.10), triglyceride levels (WMD = -0.27; 95% CI: -0.43, -0.10), high-density lipoprotein-cholesterol levels (WMD = 0.62; 95% CI: 0.34, 0.90), systolic blood pressure (WMD = -0.44; 95% CI: -0.57, -0.32), and diastolic blood pressure (WMD = -0.83; 95% CI: -1.40, -0.26). Decaffeinated coffee (510.6 mg) reduced the fasting blood glucose levels (WMD = -0.81; 95% CI: -1.65, 0.03). The meta-analysis showed that the intake of GCE containing 180 to 376 mg of CGA (administered in a capsule) and liquid decaffeinated coffee containing 510.6 mg of CGA improved the MeTS outcomes in study participants. Conclusions: The findings of the review suggested that the effect of coffee on MeTS parameters varies depending on the types and doses of coffee administered. A more detailed RCT on specific coffee doses (with adjustment for energy and polyphenol intake) and physical activity is needed to further confirm the observed outcomes.

The new emergence and re-emergence of arbovirus infections vectored by Aedes mosquitoes have been spread across Southeast Asia, Central Africa, United States, tropical Oceania and become a major of public health concerns. These arbovirus diseases found to have a similar vector, symptoms of the diseases and environments. The situation has become complicated without any specific vaccine or treatment for the diseases. As far as we concern, vector control is the best defense with many challenges, a scattered breeding site and biological behavioral sometimes, more difficult to control. Herein, we present a review of studies on current techniques proposed to combat arbovirus infections vectored by Aedes mosquitoes. A crucial gap in a vector control program is the inability to eliminate and destroy the cryptic breeding site by using conventional control methods. The idea and proper concept of using mosquitoes to bring insecticide to their oviposition site had been getting more interest in people to explore. Autodissemination is a self-delivery technique by manipulating the behavior of mosquitoes, carrying the insecticide and disseminate to cryptic breeding sites. This technique has shown a promising result in some countries and can be considered as additional tools in a vector control program

Gender recognition is trivial for physiotherapist, but it is considered a challenge for computers. The electromyography (EMG) and heart rate variability (HRV) were utilized in this work for gender recognition during the stepping exercise using a stepper. The relevant features were extracted and selected. The selected features were then fused to automatically predict gender recognition. However, the feature selection for gender classification became a challenge to ensure better accuracy. Thus, in this paper, a feature selection approach based on both the performance and the diversity between the two features from the rank-score characteristic (RSC) function in a combinatorial fusion approach (CFA) was employed. Then, the features from the selected feature sets were fused using a CFA. The results were then compared with other fusion techniques such as naive bayes (NB), decision tree (J48), k-nearest neighbor (KNN) and support vector machine (SMO). Besides, the results were also compared with previous researches in gender recognition. The experimental results showed that the CFA was efficient for feature selection. The fusion method was also able to improve the accuracy of the gender recognition rate. The CFA provides much better gender classification results which is 94.51% compared to Nazarloo's work (90.34%) and other classifiers.

Arrhythmia is a cardiac condition characterized by an irregular heart rhythm that hinders the proper circulation of blood, posing a severe risk to individuals’ lives. Globally, arrhythmias are recognized as a significant health concern, accounting for nearly 12 percent of all deaths. As a result, there has been a growing focus on utilizing artificial intelligence for the detection and classification of abnormal heartbeats. In recent years, self-operated heartbeat detection research has gained popularity due to its cost-effectiveness and potential for expediting therapy for individuals at risk of arrhythmias. However, building an efficient automatic heartbeat monitoring approach for arrhythmia identification and classification comes with several significant challenges. These challenges include addressing issues related to data quality, determining the range for heart rate segmentation, managing data imbalance difficulties, handling intra- and inter-patient variations, distinguishing supraventricular irregular heartbeats from regular heartbeats, and ensuring model interpretability. In this study, we propose the Reseek-Arrhythmia model, which leverages deep learning techniques to automatically detect and classify heart arrhythmia diseases. The model combines different convolutional blocks and identity blocks, along with essential components such as convolution layers, batch normalization layers, and activation layers. To train and evaluate the model, we utilized the MIT-BIH and PTB datasets. Remarkably, the proposed model achieves outstanding performance with an accuracy of 99.35% and 93.50% and an acceptable loss of 0.688 and 0.2564, respectively.

A newly UHPLC-MS/MS method development and validation for S-Allyl Cysteine was used to evaluate the comparative pharmacokinetic parameters. SC PLGA NPs were developed by the emulsion solvent evaporation method. SC PLGA NPs showed their drug loading and encapsulation efficiency i.e. 5.13±0.10% and 82.36±4.01%, respectively. SC PLGA NPs showed a spherical morphology on an average size (134.8±4.61nm), PDI: 0.277±0.004, and −25.3±1.03mV zeta-potential is suitable for oral delivery. Development and validation of the UHPLC-MS/MS bioanalytical method were performed successfully for PK-parameters examinations with 1.219-minutes RT, MS (162.00/73.10), and a total run-time was 2.0-minutes. 1.0–1000.0ng/mL was a linear-range with inter & intra-day accuracy (92.55–99.40%) followed by precision (1.88–4.23%). SC PLGA NPs oral bioavailability was significantly higher (**p<0.01) as compared to SC-S treated groups (iv & oral). We found that the antimicrobial activity of SC PLGA NPs was more effective than pure S-Allyl-L-Cysteine with significant results (p<0.01) as compared to SC-S. SC PLGA NPs showed fitted physicochemical and enhanced antimicrobial properties which can be helpful for oral administration. On the basis of our observations, SC PLGA NPs suggested the highest potential for the improvement of oral bioavailability with a sustained and controlled release of S-Allyl-L-Cysteine delivery.

We present a review of the current state of the field for a rapidly evolving group of technologies related to solar energy harvesting in built environments. In particular, we focus on recent achievements in enabling the widespread distributed generation of electric energy assisted by energy capture in semi-transparent or even optically clear glazing systems and building wall areas. Whilst concentrating on the cutting-edge recent results achieved in the integration of traditional photovoltaic device types into novel concentrator-type windows and glazings, we compare the main performance characteristics reported with these achievable using more conventional (opaque or semi-transparent) solar cell technologies. A critical overview of the current status and future application potential of multiple existing and emergent energy harvesting technologies for building integration is provided.

Bangladesh's railway system mostly uses typical manual railway crossing technique or boom gates through its 2,955.53 km rail route all over the country. The accidents are frequently happening in the railway crossings due to not having obstacle detectable and quickly operating gate systems, and also for fewer safety measures in the railway crossing. Currently, there are very few automatic railway crossing systems (without obstacle detectors) available, however, all of them are dependent on the national power grid without a backup plan for any emergency cases. Bangladesh is still running a bit behind in the power generation of its consumption, hence it is not possible to have a continuous power supply at all times all over the countryside. We aim to design and develop a smart railway crossing system with an obstacle detector to prevent common types of accidents in the railway crossing points. We design to use two infrared (IR) sensors to operate the railway crossing systems which will be controlled by the Arduino Uno. This newly designed level crossing system will be run with the help of sustainable renewable energy which is cost-effective, eco-friendly, and apply under the national green energy policy towards achieving sustainable development in Bangladesh as a part of the global sustainable goal to face climate change challenges. We have summarized the simulated results of several renewable energy sources including a hybrid system and optimized the Levelized Cost of Energy (LCOE), and the payback periods.

Amorphous ferrite-type rare-earth (RE) substituted garnets and garnet-oxide nanocomposite layers are prepared on clear glass substrates by using RF magnetron sputter-deposition process. By using a combination approach employing custom-built spectrum-fitting software in conjunction with Swanepoel’s envelope method, the spectral dispersion function of optical constants and the layer thicknesses are derived accurately from the transmission spectra of the as-deposited samples. The effects of excess metal-oxides added to the base material systems during the co-deposition process are found to affect the refractive index and the optical absorption coefficients of garnet-oxide composites. A number of optical constant datasets are presented, enabling the experimentalists to design nanophotonic or integrated-optics devices employing these functional materials.

Atlantic salmon (Salmo Salar) is one of the fish species that rich in omega-3 fatty acids. Consumption of omega-3 fatty acids can lower down the risk of cardiovascular disease and coronary heart disease. The extraction of omega-3 fish oil from Atlantic salmon by using hexane and isopropanol was conducted in this research. Response Surface Methodology (RSM) was used to study the impact of parameters which were temperature (50-90°C), centrifuge speed (1000-3000rpm) and solvent ratio of hexane to isopropanol (0.5-1.5) to the percentage of oil yield. The results obtained shows that 15.23%± 0.61 of oil yield from Atlantic salmon under an optimum condition of 70°C, 3000 rpm and solvent ratio of hexane to isopropanol of 1.5. The acid value, peroxide value and p-anisidine value of the fish oil obtained were 7.48 mg KOH/g, 1.94 meq/kg and 5.56 respectively which were all within the acceptable limit which stipulated by Global Organization for EPA and DHA (GOED) and Food and Agricultural Organization of the United Nations (FAO). The FTIR analysis proved the presence of alkane and carboxylic acid in the fish oil. Furthermore, GC-MS analysis showed that the fish oil contains higher monounsaturated fatty acids (MUFA) contents followed by polyunsaturated fatty acids (PUFA) and 4.5525% of total omega-3 fatty acids.

Recent years have witnessed significant advances in reinforcement learning (RL), which has registered remarkable success in solving various sequential decision-making problems in machine learning. Most of the successful RL applications, e.g., the games of Go and Poker, robotics, and autonomous driving, involve the participation of more than one single agent, which naturally fall into the realm of multi-agent RL (MARL), a domain with a relatively long history, and has recently re-emerged due to advances in single-agent RL techniques. Although, typically, the communication protocol between agents is manually specified and not altered during training, recently, some papers have shown signs of trying to emerge a communication between agents on the one hand and, on the other hand, to understand what is exchanged between agents. So, there is a growing body of literature on this topic which includes qualitative and quantitative studies and the ones that apply mixed methods. This study presents the scoping review of the methodological strategies undertaken in a total of 16 research articles. The results present the critical appraisal of quantitative methods in terms of validity and reliability and for qualitative methods considering four trustworthiness factors. In the end, relevant insights are further explored with implications and reflections on how they can benefit one's research in the field.

Phage, which is often used therapeutically, has begun to receive interest as an alternative to antibiotic growth promoters (AGPs) to enhance chicken growth. Another option that has been extensively studied as a growth promoter in chicken is probiotics. However, there are no studies using phages and probiotics as prospective feed additives for broiler chickens. Therefore, this study demonstrated the effects of phage cocktail, probiotics and their combinations on growth performance and gut microbiota of broiler chickens. A total of 288 one-day-old male Cobb 500 broilers were randomly allotted to 1 of 6 treatments in a completely randomised design. The treatments were: (i) C (basal diet (BD) only), (ii) 1ɸ (BD + 0.1% phage cocktail), (iii) 2ɸ (BD + 0.2% phage cocktail), (iv) P (BD + 0.1% probiotic), (v) 1ɸP (BD + 0.1% phage cocktail + 0.1% probiotic), (vi) 2ɸP (BD + 0.2% phage cocktail + 0.1% probiotic). The 1ɸP treatment had significantly (P < 0.05) better BW (35 d), BWG (22 – 35 d, 1 – 35d), and FCR (1-21 d. 22-35 d, 1-35 d) compared to C. Unique gut microbiota diversity was also found between the ɸP (1ɸP and 2ɸP) and non-ɸP groups (C, 1ɸ, 2ɸ and P) in ilea, particularly in the 35 d chickens. Microorganisms associated with short-chain fatty acid (SCFA) producers were significantly (P <0.05) present in the ɸP group than in the non- ɸP group. The carbohydrate and amino acid metabolism predicted genes were significantly upregulated in ɸP groups compared to non- ɸP groups. These genes were involved in the digestion and absorption of nutrients as well as the production of energy. Our findings showed that 1ɸP treatment could be a potential alternative to AGPs for poultry where growth performance was enhanced, and gut microbiota was positively modulated.