Background Some patients with mild cognitive impairment (MCI) experience gait disturbances. However, there are few reports on the relationship between gait disturbance and cognitive function in patients with MCI. Therefore, we investigated the neural correlates of gait characteristics related to cognitive dysfunction. Methods Eighty patients diagnosed with MCI from three dementia centres in Gangwon-do, Korea were recruited for this study. We defined MCI as a Clinical Dementia Rating global score of 0.5 or higher, with a memory domain score of 0.5 or greater. The patients were classified as having either early or late MCI based on their Mini Mental Status Examination z-scores. Multiple logistic regression analysis was performed to examine the association between the gait characteristics and cognitive impairment. Analyses included variables such as age, sex, years of education, number of comorbidities, body mass index and height. Results Gait velocity, step count, step length, heel-to-heel base support, swing and stance phase duration, and support time were associated with cognitive function. A decrease in gray matter volume in the right pericalcarine area was associated with gait characteristics related to cognitive dysfunction. An increase in the curvature of gray matter in the right entorhinal, right lateral orbitofrontal, right cuneus, and right and left pars opercularis areas was also associated with gait characteristics related to cognitive dysfunction. Conclusion Since gait impairment is an important factor in determining activities of daily living in patients with mild cognitive impairment, the evaluation of gait and cognitive functions in patients with mild cognitive impairment is important.

This study identifies the optimal management policy of a given energy storage system (ESS) installed in a grid-connected wind farm for maximizing the monetary benefits and provides guidelines for defining the economic value of the ESS under the optimal management policy and selecting the optimal size of the ESS based on the economic value. Considering stochastic models for wind power and electricity price, we develop a finite-horizon periodic-review Markov decision process (MDP) model to seek the optimal management policy. We also use a simple optimization model to find the optimal storage capacity and charging/discharging capacity of the ESS. By applying our analytic approach to a real-world grid-connected wind farm located in South Korea, we verify the usefulness of this study. Our numerical study shows that the economic value of the ESS is highly dependent on the management policy, wind electricity variability, and the electricity price variability. Thus, the optimal size of ESS should be carefully determined based on the locational characteristics and management policy even with limited investments. Furthermore, this study provides a meaningful policy implication on how much a subsidy the government should provide for installing ESS in a wind farm.

For the effective utilization of rice husk, organosolv fractionation was investigated to separate three main components (glucan, xylose, and lignin) with low acid concentration. Reaction temperatures of 170–190 °C, ethanol concentrations of 50–70% (v/v), and sulfuric acid concentrations of 0–0.7% (w/v) were investigated, with the reaction time and liquid-to-solid ratio kept constant at 60 min and 10, respectively. The fractionation conditions for the efficient separation into the three components of rice husk were determined to be 180 °C, 60% (v/v) of ethanol, and 0.25% (w/v) of sulfuric acid. Under these fractionation conditions, 86.8% of the xylan and 77.5% of the lignin were removed from the rice husk, and xylose and lignin were obtained from the liquid in 67.6% and 49.8% yields, respectively. The glucan digestibility of the fractionated rice husk was 85.2% with an enzyme loading of 15 FPU (filter paper unit) of cellulase per g-glucan.

Porcine parvovirus (PPV) 1 is a major causative pathogen of reproductive failure, and porcine circovirus (PCV) 2 is an etiological pathogen causing PCV-associated and PCV diseases worldwide. PPV2–6 and PCV3 were recently identified as newly emerging viruses with unknown pathogeneses. However, little is known of PPV1–6 and PCV3 effects or their co-infections with PCV2. In this study, we examined 926 samples (272 aborted pig fetuses and 654 pig lung tissues) from domestic pig farms for the presence of PPV1–6 or PCV3 and for PCV2 co-infection with these seven viruses. The prevalence of PPV and PCV was significantly greater in lung tissue samples than aborted pig fetus samples. PPV3–6 were detected for the first time in Korean domestic pigs. Co-infection rates with PCV2 and other viruses were significantly higher in abattoir samples than that in aborted pig fetus samples. Concurrent infections are more common than single infection in pig population and nu-merous infectious pathogens such as PPV and PCV2 can impact the respiratory diseases. Fur-thermore, Korean PPV1 strain (PPV1-82) was identical to the virulent PPV-27a strain in this respect. Our results describe, for the first time the prevalence of PPV1–6 and PCV3 infections and their co-infection rates with PCV2 in Korean domestic pigs.

Effective oral care is a critical requirement to maintain high quality of life. Most oral diseases are caused by plaque (oral biofilm), which is also correlated with systemic diseases. A common method to remove biofilm is brushing teeth with a toothpaste. However, 3.5 billion people in the world have oral diseases, meaning that more efficient methods of removing biofilms are needed. We have developed a toothbrush applying bioelectric effect (BE) utilizing an electric force for biofilm removal. It demonstrated significantly higher biofilm removal efficiency than non-BE manual toothbrushes. Tests were performed in saline and toothpaste conditions using various pressure. Results showed that the BE toothbrush had a significantly higher biofilm removal efficiency in saline (0.5 N: 215.43 ± 89.92 %, 2.5 N: 116.77 ± 47.02 %) and in a toothpaste slurry (0.5 N: 104.96 ± 98.93 %, 2.5 N: 96.23 ± 35.16 %) than non-BE manual toothbrushes. Results also showed that BE toothbrushes were less dependent on toothpaste. This study suggests that the application of BE can be a new solution to plaque problems in oral care.

The number of fishers working on commercial fishing vessels worldwide is approximately 159,800 according to the Food and Agriculture Organization of the United Nations. The International Labour Organization estimates that the mean annual number of deaths during fishing is approximately 24,000. Most guidelines for the prevention of marine accidents have been developed with a focus on vessels involved in international navigation. As these guidelines may have parts that are unsuitable for application in small-scale boats operating in coastal areas, appropriate modifications are required. This study analyzed quantitative data on 1,790 marine accidents that occurred in trap fishery, a globally common type of fishery, and data obtained through a survey of 101 fishers in South Korea. A guideline to reduce the rate of fatal accidents was developed using the Bayesian network, a method used for the analysis of accidents, as suggested in the formal safety assessment protocol. The results of data analysis and the developed guidelines are expected to be beneficial to all fishers involved in trap fishery across many countries worldwide.

Hydrogels incorporated with hydrophobic motifs have received considerable attention to recapitulate the cellular microenvironments, specifically for the bio-mineralization of a 3D matrix. Introduction of hydrophobic motifs into a hydrogel often results in irregular arrangement of the motifs, and further phase separation of hydrophobic domains, but limited efforts have been made to resolve this challenge in the hydrophobically-modified hydrogel. Therefore, this study presents an advanced integrative strategy to incorporate hydrophobic domains regularly in a hydrogel by self-assembling of polymer cross-linkers, building blocks of a hydrogel. Self-assemblies between polymer cross-linkers were examined as micro-domains to incorporate hydrophobic motifs in a hydrogel. The self-assembled structures in a pre-gelled solution were confirmed with the fluorescence analysis and the hydrophobicity of a hydrogel could be tuned by incorporating the motifs in a controlled manner. Overall, the results of this study would greatly serve to tuning performance of a wide array of hydrophobically-modified hydrogels in drug delivery, cell therapies and tissue engineering.

This study aims to provide an updated overview of the systematic evaluation and management of Post-Traumatic trigeminal neuropathic pain (PTTN) resulting from dental procedures or trauma. PTTN arises following an injury to the trigeminal nerve, which is responsible for sensory and motor functions in the maxillofacial region. The etiology encompasses various dental procedures and craniofacial trauma, leading to a spectrum of symptoms, from tingling to severe pain. Diagnostic challenges stem from the absence of standardized criteria and the overlap with focal neuralgia, necessitating comprehensive evaluation. Misdiagnosis can result in prolonged suffering and unnecessary procedures. Successful management hinges on prompt diagnosis and interdisciplinary collaboration, with early intervention crucial in mitigating chronicity. While nerve recovery post-trauma is challenging, preventive measures through accurate evaluation and treatment are paramount.  Management for PTTN includes non-invasive and surgical interventions. Non-invasive intervention includes systematic and local pharmacological management. This review enhances uniformity in PTTN evaluation and treatment approaches despite standardized study limitations.

Coronary artery disease (CAD) is a prevalent cardiovascular condition characterized by the accumulation of plaque within coronary arteries. This plaque accumulation obstructs blood flow to the heart, resulting in a heart attack. While distinct features of CAD have been identified, its causes remain largely unclear, with the exception of environmental and nutritional factors. This study aimed to investigate the connection between genetic factors and CAD, focusing on the thymidylate synthase (TS) gene, a gene involved in one-carbon metabolism. Therefore, our research targeted single nucleotide polymorphisms that could potentially impact TS gene expression and lead to dysfunction. Our findings strongly associate the TS 1100T>C and 1170A>G genotypes with CAD susceptibility. We observed that TS 1100T>C polymorphisms increased disease susceptibility in several groups, while the TS 1170A>G polymorphism displayed a decreasing trend for disease risk when interacting with clinical factors. Furthermore, our results demonstrate the potential contribution of the TS 1100/1170 haplotypes to disease susceptibility, indicating a synergistic interaction with clinical factors in disease occurrence. Based on these findings, we propose that polymorphisms in the 3'-UTR miRNA binding site of the TS gene could serve as clinically useful biomarkers for the prevention, prognosis, and management of CAD.

The objective of this study is to investigate the effect of the premixed ethanol ratio based on the same total heating value in-cylinder on the equivalence ratio distributions and the injected fuel droplet behavior in the cylinder of the RCCI engine. The spray simulation was conducted by dividing two-part. First, the spray validation simulations progressed to find the spray-influenced factor of the test injector. Next, the engine simulations were performed with the spray-influenced factor obtained from spray validation simulations to investigate the effect of the premixed ethanol ratio based on the same total heating value in-cylinder on the injected fuel atomization and the equivalence ratio distributions. The introduced total heating value was fixed at 595J based on the lower heating value of diesel 14mg. The heating value of the premixed ethanol ratio varied from 0% to 40% based on the same total heating value in-cylinder in steps of 10%. It was revealed that when the premixed ethanol ratio based on the same total heating value in-cylinder was increased, the spray tip penetration value was reduced from the time after 4deg of diesel injection start because of the short injection duration by the small amount of diesel fuel. The SMD value was also more enormous up to 32.58% with increasing the premixed ethanol ratio because of the low kinetic energy of the injected fuel by the short injection duration and the slow evaporation of the injected fuel by the low cylinder temperature.

OBJECTIVE: Although 3D-printed anatomic models are not new to medicine, the high costs and lengthy production times entailed have limited their application. Our goal was developing a new and less costly 3D modeling method to depict organ-tumor relations at faster printing speeds. METHODS: We have devised a method of 3D modeling using DICOM images. Coordinates are extracted at a specified interval, connecting them to create mesh-work replicas. Adjacent constructs are depicted by density variations, showing anatomic targets (ie, tumors) in contrasting color. RESULTS: An array of organ solid-tumor models were printed via Fused Deposition Modeling 3D printer at significantly less cost ($0.05/cm3) and time expenditure (1.73 min/cm3; both, p<.001). Printed models helped promote visual appreciation of organ-tumor anatomy and adjacent tissues. Our mesh-work 3D thyroidal prototype reproduced glangular size/contour and tumor location, readily approximating the surgical specimen. CONCLUSIONS: This newly devised mesh-type 3D printing method may facilitate anatomic modeling for personalized care and improve patient awareness during informed surgical consent.

This paper presents a novel dynamic camera parameter control method for position and posture estimation of highly miniaturized AR markers (micro AR markers) using a low cost general camera. The proposed method performs iterative calculation of the marker’s position and posture to converge them to specified accuracy with dynamically updating the camera’s zoom, focus and other parameter values based on the detected marker’s depth distances. For a 10 mm square micro AR marker, the proposed system demonstrated recognition accuracy of better than ±1.0% for depth distance and 2.5∘ for posture angle with a maximum recognition range of 1.0 m. In addition, the iterative calculation time was at most 0.7 seconds in an initial detection of the marker. These experimental results suggest that the proposed method and system can be applied to a robotic precise handling of small objects with low cost.

Recently, research on ultra-high-performance concrete (UHPC) with the characteristics of ultra-high strength, high toughness, and high durability has been actively conducted from materials to actual structural applications. However, research on experimental methods that reflect the unique characteristics of UHPC, which are different from those of normal concrete, is insufficient. To solve the difficulties in applying the compressive creep test method for normal concrete to UHPC and to verify the validity of the recently proposed ASTM C 1856 standard test method, this study performed compressive creep tests on UHPC with variables of specimen size, sustained load intensity, fiber length, and strain measuring method. Two types of cylindrical specimens of ϕ100 × 200 mm and ϕ75 × 150 mm were used for a specimen size variable. The sustained load intensities of 10% to 40% based on the specified compressive strength of 150 MPa were applied. Two types of steel fiber lengths of 13 mm and 19.5 mm in the UHPC mix were used as a variable, and three strain measuring methods of the embedded strain gauge method, the attached strain gauge method, and the strain meter with stud measured the change in length of the UHPC specimens. The experimental results showed that the strain meter method using the standard rod had limitations due to the error in the verification process using the standard rod and the observation error of the measurer, and the sustained load intensity is preferable to 15% to 40% of the actual compressive strength. It was found that it is possible to perform a compressive creep test for UHPC using a specimen with a size of ϕ75 mm or more, and the fiber length did not affect the creep behavior of UHPC up to 19.5 mm. As a result of comparing the UHPC creep test results with the creep prediction model, the B3 model was found to most accurately predict the UHPC creep behavior. The creep coefficient pattern of the B3 model was very similar to the measured results, and well reflected the effects of the mixing ratio and compressive strength of UHPC.

In this study, the microbial community during the barley yeast fermentation of stevia leaves and its correlation with antioxidant, antiobesity, and anti-inflammatory properties, as well as metabolites, were investigated using UPLC-Q-TOF-MS. Stevia was fermented using commercial TSB media (TSB 1, TSB 2, and TSB 3) and sucrose (Sucrose 1, Sucrose 3, and Sucrose 3) for 1, 3, and 5 days, respectively. Stevia ferments showed higher DPPH and ABTS radical scavenging capacity compared to samples incubated with sucrose for 5 days, and all six ferments inhibited nitric oxide production in a concentration-dependent manner in LPS-induced mouse macrophages. Furthermore, UPLC-QTOF-MS analysis identified 23 related substances, including 10 terpenoids, including rubusoside, steviolbioside, and rebadioside derivatives; dulcoside A; and phlomisoside II, which are indicators of stevia, as well as five flavonoids, four phenolic acids, and four fatty acids. We also identified the microbial community during fermentation via the next-generation sequencing of the 16S rRNA gene for bacteria and the internal transcribed spacer (ITS) gene for fungi. The results showed that TSB 1 and Sucrose 1 ferments were dominated by the pathogens Enterococcus hirae (58.93%) and Cronobacter sakazakii (80.92%), while samples fermented for more than 3 days were pathogen-free and dominated by lactic acid bacteria such as Pediococcus stilesii (73.37%). Microbial community analysis using the ITS region showed that Saccharomycopsis fibuligera, classified as a yeast rather than a mold, dominated the stevia fermentation regardless of the fermentation duration. In particular, the microbial community of the fermentation with a sugar solution was dominated by S. fibuligera by more than 99% throughout the fermentation periods of 1, 3, and 5 days. Finally, to apply the stevia ferments topically to human skin, skin irritation tests were performed on 30 volunteers. The results showed that the highly concentrated extracts (1 mg/mL) of all six stevia ferments were hypoallergenic. Taken together, these findings suggest that brewer's yeast fermented from stevia leaves with a sugar solution offers promise as a natural ingredient for use in functional foods and cosmetics.

We suggest a deep learning based sensor signal processing method to remove chemical, kinetic and electrical artifacts from ion selective electrodes’ measured values. An ISE is used to investigate the concentration of a specific ion from aqueous solution, by measuring the Nernst potential along the glass membrane. However, application of ISE on a mixture of multiple ion has some problem. First problem is a chemical artifact which is called ion interference effect. Electrically charged particles interact with each other and flows through the glass membrane of different ISEs. Second problem is the kinetic artifact caused by the movement of the liquid. Water molecules collide with the glass membrane causing abnormal peak values of voltage. The last artifact is the interference of ISEs. When multiple ISEs are dipped into same solution, one electrode’s signal emission interference voltage measurement of other electrodes. Therefore, an ISE is recommended to be applied on single-ion solution, without any other sensors applied at the same time. Deep learning approach can remove both 3 artifacts at the same time. The proposed method used 5 layers of artificial neural networks to regress correct signal to remove complex artifacts with one-shot calculation. Its MAPE was less than 1.8% and R² of regression was 0.997. A randomly chosen value of AI-processed data has MAPE less than 5% (p-value 0.016).

In this study, a flexible strain sensor is devised using corrugated poly(3-hexylthiophene) (P3HT) thin film. In the previous studies, the P3HT-based photoactive thin film was shown to generate direct current (DC) under broadband light, and the generated DC voltage varied with applied tensile strain. Yet, the mechanical resiliency and strain sensing range of the P3HT-based thin film strain sensor were limited due to relatively more brittle thin film constituent—poly(3,4-ethylenedioxythiophene)-polystyrene(sulfonate) (PEDOT:PSS) conductive thin film as a bottom electrode. To address this issue, it is aimed to design mechanically resilient strain sensor using corrugated thin film constituents. Buckling is induced to form corrugation in the thin films by applying pre-strain to the substrate, where the thin films are deposited, and releasing the pre-strain afterwards. It is known that corrugated thin film constituents exhibit different optical and electronic properties from non-corrugated ones. Therefore, to optimize design of the flexible strain sensor, it was studied to understand how the applied pre-strain and thickness of the PEDOT:PSS thin film affect the optical and electrical properties. Also, pre-strain effect on light absorptivity of the corrugated P3HT-based thin films was studied. In addition, strain effect was investigated on the optical and electrical properties of the corrugated thin film constituents. Finally, flexible strain sensors are fabricated by following the design guideline, which is suggested from the studies on the corrugated thin film constituents, and DC voltage strain sensing capability was validated. As a result, flexible strain sensor exhibited tensile strain sensing range up to 5% at frequency up to 15 Hz with maximum gage factor ~7.

TVs and monitors are among the most widely used displays in various environments. However, they have limitations in their physical display conditions, such as a fixed size/position and a rigid/flat space. In this paper, we suggest a new "Display In the Wild" (DIW) concept to overcome the aforementioned problems. Our proposed DIW system allows us to display a flexibly large screen on dynamic non-planar surfaces at an arbitrary display position. To implement our DIW concept practically, we choose a projector as the hardware configuration in order to a generate screen anywhere with different sizes. However, distortion occurs when the projector displays content on a surface that is dynamic and/or non-planar. Therefore, we propose a distortion correction method for DIW to overcome the aforementioned surface-constraints. Since projectors are not capture devices, we propose using a depth camera to determine the distortions on the surfaces quickly. We also propose DIW-specific calibration and fast/precise correction methods. Our calibration method is constructed to easily and quickly detect the projection surface, and also allows our proposed system to accommodate the intrinsic parameters such as a display resolution and field of view. We accomplish a fast undistortion process of the projector by considering only surface boundary pixels, which enables our method to run in real time. In our comprehensive experiments, the proposed DIW system generates undistorted screens such as TVs and monitors on dynamic non-planar surfaces at an arbitrary display position with Unmanned Aerial Vehicles (UAVs) in a fast and accurate manner, demonstrating its usefullness in practical DIW scenarios.

Objectives: The aim of the study was to evaluate the effects of oral administration of clinical dose of beraprost for feline CKD in healthy cats, and also to examine whether NOS inhibition reversed them. Methods: A placebo-controlled pharmacological sequential design study was carried out to assess plasma aldosterone and renin concentrations, mean blood pressure, heart rate, renal plasma flow, and renal vascular resistance. Results: Beraprost reduced plasma aldosterone when compared to the placebo (P < 0.05); this was reversed when NOS inhibitor NG-nitro-L-arginine methyl ester (L-NAME) was added to beraprost treatment (P < 0.01). No differences in the plasma renin concentration or hemodynamic parameters were detected between beraprost and placebo. The correlation ratios (η2) showed opposite relationships between beraprost and added L-NAME effects on aldosterone concentration, mean blood pressure, heart rate, renal plasma flow, and renal vascular resistance (P < 0.001). Conclusions: In healthy cats, the clinical dose of beraprost suppresses plasma concentration of aldosterone, which can be reversed by inhibition of NOS.

Histone demethylases, enzymes responsible for removing methyl groups from histone proteins, have emerged as critical players in regulating gene expression and chromatin dynamics, thereby influencing various cellular processes. LSD2 and LSD1 have attracted considerable interest among these demethylases because of their associations with cancer. However, while LSD1 has received significant attention, LSD2 has not been recognized to the same extent. In this study, we conduct a comprehensive comparison between LSD2 and LSD1, with a focus on exploring LSD2's implications. While both share structural similarities, LSD2 possesses unique features. Functionally, LSD2 shows diverse roles, particularly in cancer, with tissue-dependent roles. Additionally, LSD2 extends beyond histone demethylation, impacting DNA methylation and DNA damage repair pathways. This study underscores the distinct roles of LSD2, providing insights into their contributions to cancer and other cellular processes.

Hydrostatic bearings for liquid rocket engine turbopumps provide distinctive advantages including high load capacity even with low viscosity cryogenic fluid and extending a life span by minimizing friction and wear between rotor and bearing surfaces. Application of hydrostatic bearings into turbopumps demands reliable test data base with well-quantified operating parameters and experimentally validated accurate performance predictive tools. The present paper shows the comprehensive experimental data and validation of predicted static load characteristics of hydrostatic journal bearings lubricated with air, water, and liquid nitrogen. Extensive experiments for static load characteristics of hydrostatic bearings are conducted using a turbopump rotor-bearing system simulator while increasing supply pressure (Ps) into the test bearings. The test results demonstrate notable effects of the test fluids and their temperatures, as well as Ps, on the bearing performance. In general, the measured bearing flow rate, rotor displacement, and stiffness of the test bearings steadily increase with Ps. The static load bearing characteristics predictions considering flow turbulence and compressibility matched well with the experimental results. The work with an independent test data and engineering computational programs will further the implementation of hydrostatic bearings in high performance turbopump shaft systems with improved efficiency and enhanced reusability of liquid rocket engine sub-systems.

As climate changes, our daily life has been much influenced by abnormal meteorological phenomena such as heavy rainfall, heat wave, heavy snowfall, and fine dust. Atmospheric air quality is worsening day by day and indoor air quality is also affected by interconnected daily activities throughout the inside and outside of buildings and houses. Nowadays, pollutants from various sources are emitted, transformed by sunlight, vapor, and ozone and transported into the city from country to country. Due to these reasons, there have been high demands to monitor the transportation of particulate matters and improve air quality. Monitoring of pollutants and identification of type and its concentration enables us to track and control its generation and consequently find out the solution. However, monitoring of pollutants, especially, particulate matter generation and its transportation is still not fully operated in atmospheric air due to its open nature and meteorological factors. Even though indoor air is relatively easy to monitor and control than outdoor in the aspect of specific volume and contaminant source, but it still needs to consider the meteorological parameters because indoor air is not fully separated from the outdoor air flow and contaminants transportation. In this study, optical approach using spectral sensor was attempted to reveal the feasibility of wavelength and chromaticity values of reflected light from specific particles. From the analysis of reflected light of various particulate matters according to different liquid additives, parameter studies were performed to investigate which experimental conditions can contribute to the enhanced selective sensing of particulate matters. Five different particulate matters such as household dust, soil, talc powder, gypsum powder and yellow pine tree pollen were utilized and observed to elucidate the relationship between property of particulate matter and detected light spectrum. Applicable approaches to assist current particle matter sensors and improve the selective sensing were suggested.

Submucosal invasion is a critical step in gastric cancer (GC) progression, which greatly enhances metastasis risk. Cancer stem cells are responsible for invasion, metastasis, and tumor growth. To identify stem cell-related markers associated with submucosal invasion in GCs, we investigated the expression of candidate cancer stem cell (CSC) markers (CD133, CD44, and ALDH1A) and intestinal stem cell (ISC) markers (EPHB2, OLFM4, and LGR5) in early GCs with submucosal invasion. Remarkably, expression of all ISC markers and CD133 was frequently confined to the basal area of the lamina propria (basal pattern) in mucosal cancer. The proportion of stem cell marker-positive cells substantially increased during submucosal invasion. Given that ISC markers are restricted to the crypt base of the normal intestinal mucosa, these findings suggest that many early GCs may retain hierarchical characteristics. CD44 expression showed a focal pattern, ALDH1A was predominantly expressed diffusely, and there was no expansion of CD44 or ALDH1A expression in the submucosal cancer cells. RSPO2 from muscularis mucosa seem to be partly responsible for the increased expression of ISC markers in GC cells at the basal areas. We also found that ISC markers were correlated with CDX2 expression in GCs, indicating that ISC markers are involved in the intestinal differentiation in GCs. Interestingly, ISC markers (EPHB2 and OLFM4) and CD133 showed a positive impact on clinical outcomes. In particular, the prognostic value of EPHB2 was significant for intestinal-type GCs in a multivariate analysis. In summary, ISC markers and CD133 showed a basal distribution pattern along with enhanced expression in submucosal invading cells in early GCs. EPHB2 was an independent prognostic marker in intestinal-type GCs.

There is an accelerating requirement for ocean sensing where autonomous vehicles can play an essential role in assisting engineers, researchers, and scientists with environmental monitoring and collecting oceanographic data. This paper is performed to develop a rigid sail for the autonomous sailing drone. Our study aims to numerically analyze the aerodynamic characteristics of curvy twin sail and compare it with wing sail. Because racing regulations limit the sail shape, only the two-dimensional geometry was open for an optimization. Therefore, this study’s first objective was to identify the aerodynamic performance of such curvy twin sails. Simultaneously, a secondary objective was to estimate the effect of the sail’s spacing and shapes. A viscous Navier-Stokes flow solver is used for the numerical aerodynamic analysis. The 2D aerodynamic investigation is a preliminary evaluation. The results have shown that the curvy twin sail designs have improved lift, drag, and driving force coefficient compared to the wing sails. The spacing between the port and starboard sails of curvy twin sail is an important parameter. The spacing is 0.035L, 0.07L, and 0.14L shows the lift coefficient reduction because of dramatically stall effect, while flow separation is improved with spacing is 0.21L, 0.28L, and 0.35L. Significantly, the spacing 0.28L shows the maximum high pressure at the lower area and the small low pressure area at leading edges, so the highest lift is generated.

This study examines how the design of museum archaeological boxes and the overall museum image affect behavioral intention. This research used partial least squares-structural equation modeling, indicating a relationship between aesthetics, symbolism, affective museum image, perceived value, and behavioral intention. This study found that symbolism predicted behavioral intention. Moreover, aesthetics, symbolism, and affective museum image affected perceived value, in turn triggering behavioral intention. This indicates theoretical and practical implications for museum products.

Hope is important in the rehabilitation of persons with schizophrenia, through scales to measure hope are not appropriate for this population. The purpose of this cross-sectional study was to identify the psychometric properties of the Schizophrenia Hope Scale-9 (SHS-9) using data from 83 people with schizophrenia in four mental health centers and 762 healthy persons from two universities in South Korea. The mean (standard deviation) SHS-9 score of the participants with schizophrenia and healthy participants was 11.24 (4.90) and 14.83 (3.10), respectively. Lower scores indicate a lower level of hope. The internal consistency alpha coefficient was 0.92 with a 4-week test-retest reliability of 0.89. Criterion-related construct validity was established by examining the correlation between the SHS-9 and the State-Trait Hope Inventory scores. Divergent validity was identified through a negative relationship of SHS-9 with the Beck Hopelessness Scale. The construct validity of the SHS-9 was confirmed through principal component analysis with extraction methods, which resulted in a one-factor solution, accounting for 49–60% of the total item variance.. This study provided evidence for the validity and reliability of the SHS-9; therefore, it could be used to measure hope in people with schizophrenia.

Licochalcone H (LCH), a regioisomer of licochalcone C derived from the root of Glycyrrhiza inflata. CRC treatment has always been challenged by the development of resistance. We investigated the antiproliferative activity of LCH in oxaliplatin (Ox)-sensitive and -resistant CRC cells. LCH significantly inhibited cell viability and colony growth in both Ox-sensitive and Ox-resistant CRC cells. We found that LCH decreased epidermal growth factor receptor (EGFR) and AKT kinase activities and related activating signaling proteins including phospho (p)-EGFR and pAKT. A computational docking model indicated that LCH may interact with EGFR, AKT1, and AKT2 at the ATP-binding sites. LCH induced ROS generation, as verified by N-acetyl-L-cysteine (NAC) treatment, and increased the expression of the ER stress markers. LCH treatment of CRC cells induced depolarization of MMP and increased. Multi-caspase activity was induced by LCH treatment and confirmed by Z-VAD-FMK treatment. LCH increased the number of subG1 cells and arrested the cell cycle at the G1 phase. LCH inhibits the growth of Ox-sensitive and Ox-resistant CRC cells by targeting EGFR and AKT, and inducing ROS generation and ER stress-mediated apoptosis. Therefore, LCH could be a potential therapeutic agent for improving not only Ox-sensitive but also Ox-resistant CRC treatment.

Rice, as a staple crop feeding billions, faces constant threats from various diseases jeopardizing global food security. Precise understanding of disease resistance mechanisms is crucial for developing resilient rice varieties. Traditional genetic mapping methods, such as QTL mapping, provide valuable insights into the genetic basis of diseases. However, the complex nature of rice diseases demands a holistic approach to gain accurate knowledge of it. Omics technologies, including genomics, transcriptomics, proteomics, and metabolomics, enable a comprehensive analysis of biological molecules, uncovering intricate molecular interactions within the rice plant. Integration of various mapping techniques using multi-omics data has revolutionized our understanding of rice disease resistance. By overlaying genetic maps with high-throughput omics datasets, researchers can pinpoint specific genes, proteins, or metabolites associated with disease resistance. This integration enhances the precision of disease-related biomarkers with better understanding of their functional roles in disease resistance. Improvement of rice breeding for disease resistance through this integration represents a significant stride in agricultural science because better understanding of the molecular intricacies and interactions underlying disease resistance architecture leads to more precise and efficient development of resilient and productive rice varieties. In this review, we explore how the integration of mapping and omics data can give a transformative impact on rice breeding for enhancing disease resistance.

Recently, cobalt iron boron (CoFeB) thin films have been widely investigated to apply to magnetic sensors, due to their high magnetic moment, anisotropy, and stability. However, most of these studies are conducted on rigid silicon substrates. For more diverse applications of magnetic sensors and angle sensors, it is important to explore the properties of ferromagnetic thin films grown on non-rigid deformable substrates. Here, using representative deformable substrates such as polyimide (PI), polyethylene naphthalate (PEN) and polydimethylsiloxane (PDMS) that can be bent or stretched, we report experimental comparison of in-plane magnetic field angle-dependent properties of the amorphous Ta/CoFeB/MgO/Ta thin film which is grown on those deformable substrates. We investigate effects of substrate roughness, tensile stress, characteristics of deformable substrates, and sputtering process on the change of magnetic properties like coercive field (Hc), remanence over saturation magnetization (Mr/Ms), and their biaxial characteristics. This work presents unconventional foundations for exploring deformable magnetic sensors capable of detecting magnetic field angle.

Febrile seizure (FS), which occurs as a response to fever, is the most common seizure that occurs in infants and young children. FS is usually accompanied by diverse neuropsychiatric symptoms including impaired social behaviors; however, no causative link between FS and autism spectrum disorder (ASD) has yet been established. Here, we provide evidence linking FS occurrence with ASD pathogenesis in rats. We developed an FS juvenile rats model and found ASD-like abnormal behaviors including deficits in social novelty, repetitive behaviors, and hyperlocomotion. In addition, FS model juvenile rats showed enhanced levels of gliosis and inflammation in the hippocampal CA2 region and cerebellum. Furthermore, abnormal levels of social and repetitive behaviors persisted in adults FS model rats. These findings suggest that occurrence of FS in infants can cause behavioral endophenotypes of ASD.

The spring-in phenomenon of the composite parts can affect the assembly process. This study aims to predict the spring-in phenomenon of carbon fiber reinforced plastic (CFRP) part. Here, we predict the spring-in of the CFRP part using a coupled analysis of the forming and cooling processes during the stamping process. First, a simulation of the entire forming process, such as the transfer of the composite laminate, gravity analysis, and forming was performed to obtain the temperature distribution of the CFRP part. Subsequently, a finite-element (FE) simulation of the cooling process was conducted to predict the spring-in phenomenon of the shaped CFRP part using the temperature data obtained in the forming simulation. Finally, a CFRP part was manufactured and compared with the results of the FE simulation.

This study was conducted on elderly over 65 years of age to verify that healing garden activities control stress in the elderly. The experimental group performed garden activities once a week for 12 weeks, 2 hours each, and the control group continued their daily lives. Each group's cumulative stress at the beginning and end, total power (TP), the standard deviation of the normal-to-normal interval (SDNN), and root mean square differences of successive R-R intervals (RMSSD) were measured using a stress index meter, u-bio MACPA. As a result of the analysis, the experimental group had a statistically significant decrease in cumulative stress compared to the control group, and TP significantly increased compared to the control group. SDNN and RMSSD of the experimental group increased, respectively, and the control group decreased, respectively, but it was not statistically significant. The fact that cumulative stress decreased, and stress evaluation indicators increased shows that daily stress can be controlled through healing garden activities. This confirms that the value of the garden can extend to healing.

In this study, effluent water was produced through Submerged Membrane Bio-Reactor (SMBR) process, which is a simple system and decomposes organic matter contained in wastewater with biological treatment process and performs solid-liquid separation, Especially, ozone oxidation treatment process is applied to effluent water containing fluorescent whitening agent, which is a trace pollutant which is not removed by biological treatment, and influences the quality of reused water. The concentration of COD in the SMBR was 449.3 mg/ℓ-COD, and the concentration of permeate water was 100.3 mg/ℓ-COD. The removal efficiency was about 70.1%. The amount of ozone re- quired for the removal of the fluorescent whitening agent in the permeated water in SMBR was 6.67 g-O3/min, and the amount of ozone required to remove COD relative to the permeate water was calculated to remove 0.997 mg-COD for 1 mg of O3.

We present an automated system for nutrient solution management. Prior arts usually measure only pH and EC of the nutrient solutions for maintenance. When EC drops, they just simply add concentrated nutrient to the horticulture bed. Such approach can maintain the density of nutrient solution but cannot maintain the rates of individual ion particles. To prevent nutrition related disorders, fertilization methods with ion selective electrodes are widely introduced. This trend measures individual ion concentration of nutrient solution to maintain appropriate nutrient composition by supplying only insufficient ions. Many researchers have suggested ISE based automated fertilization systems. However, they failed to control a chemical artifact called ion interference effect, which becomes greater at higher density. Our system measures individual concentration of multiple ions and add only deficient nutrients, while handling the ion interference effect issue. To ensure the performance of ion selective electrodes, the system also performs fully automated 3-point calibration 24 times a day. A machine learning algorithm is applied on the sensory parts to remove ion interference effect which make measurement of complex solution with ISE almost impossible. With automated calibration and signal processing technology, the system robustly and continuously maintains nutrient condition for plants. We suggest applying this system on closed hydroponic systems such as smart farms or plant factory, to reduce water consumption and to provide more appropriate environment for the crops.

Korean manufacturers have developed a new varicella vaccine, NBP608. This phase 3, randomized, double-blind, multicenter study aimed to compare the immunogenicity and safety of NBP608 among healthy children to those of VarivaxTM (control). Children aged 12 months to 12 years were randomized 1:1 to receive either NBP608 or control vaccine. Serum samples were obtained before vaccination and within six to eight weeks after vaccination. A total of 499 participants (NBP608, n = 251; control, n = 248) was enrolled. The seroconversion rate (SCR) measured using FAMA assay was 99.53% in the NBP608 group, and the lower limit of the 95% confidence interval (95% LCL) for SCR difference (NBP608 minus control) was 0.52%. This 95% LCL for the difference was higher than the specified non-inferiority margin of –15%. In assessment by gpELISA, the SCR was 99.53% in the NBP608 group; and the 95% LCL for SCR difference was 6.5%, which was higher than the specified non-inferiority margin of –15%. There were no significant differences between the NBP608 and control group with respect to proportions of participants who demonstrated local and systemic solicited AEs. This study indicated that NBP608 had a clinically acceptable safety profile and was not immunologically inferior to VarivaxTM.

Low fertility is a critical social problem worldwide, and infertility has a prevalence of 15%. This cross-sectional study aimed to understand the factors affecting the usage and satisfaction of Korean medicine (KM) in subfertile women. An online survey was conducted from November 3 to November 8, 2021. The survey collected basic information, KM treatment experience, and satisfaction from women who experienced poor pregnancy. The t-test and chi-square test (χ2-test) were used to determine the overall characteristics of the subjects and factors affecting the utilization and satisfaction of KM treatment. Of the total of 29,465 people, 4,922 read the survey email, and 601 responded. After excluding 51 insincere respondents, 550 respondents were included in the final analysis. Of these, 43.1% had experience with conventional treatment, and 15.6% had received KM treatment. Integrative subfertility treatment was significantly more common (24.9%) than KM treatment alone (10.2%) (P=0.00). Women with no childbirth experience (P=0.01) and those with a master’s degree (P=0.01) were more willing to participate in the ‘KM Support Project for Subfertility’. Our findings suggest that subfertile patients prefer integrated medical treatment over KM alone. Further studies are needed to assess the status of integrative medicine treatment, satisfaction with each KM intervention, factors for low satisfaction, and patient requirements.

Software is playing the most important role in recent vehicle innovation, and consequently the amount of software has been rapidly growing last decades. Safety-critical nature of ships, one sort of vehicles, makes Software Quality Assurance (SQA) has gotten to be a fundamental prerequisite. Just-In-Time Software Defect Prediction (JIT-SDP) aims to conduct software defect prediction (SDP) on commit-level code changes to achieve effective SQA resource allocation. The first case study of SDP in maritime domain reported feasible prediction performance. However, we still consider that the prediction model has still rooms for improvement since the parameters of the model are not optimized yet. Harmony Search (HS) is a widely used music-inspired meta-heuristic optimization algorithm. In this article, we demonstrated that JIT-SDP can produce the better performance of prediction by applying HS-based parameter optimization with balanced fitness value. Using two real-world datasets from the maritime software project, we obtained an optimized model that meets the performance criterion beyond baseline of previous case study throughout various defect to non-defect class imbalance ratio of datasets. Experiments with open source software also showed better recall for all datasets despite we considered balance as performance index. HS-based parameter optimized JIT-SDP can be applied to the maritime domain software with high class imbalance ratio. Finally, we expect that our research can be extended to improve performance of JIT-SDP not only in maritime domain software but also in open source software.

Wireless sensor networks are widely used in many applications such as environmental monitoring, health care, smart grid and surveillance. Many security protocols have been proposed and intensively studied due to the inherent nature of wireless networks. In particular, Wu et al. proposed a promising authentication scheme which is sufficiently robust against various attacks. However, according to our analysis, Wu et al.'s scheme has two serious security weaknesses against malicious outsiders. First, their scheme can lead to user impersonation attacks. Second, user anonymity is not preserved in their scheme. In this paper, we present these vulnerabilities of Wu et al.'s scheme in detail. We also propose a new scheme by fixing such vulnerabilities and improving the performance of the protocol.

We introduce the lower chaos grade of a real-valued function F defined on the Markov triple (E,μ,Γ), where μ is a probability measure and Γ is the carré du champ operator. As an application of this concept, we obtain the better estimate of the four moments theorem for Markov diffusion generators worked by Bourguin et al (2019). For our purpose, we need to find the largest number except zero in the set of eigenvalues corresponding to its eigenfunction in the case where the square of a random variable F, coming from a Markov triple structure, can be expressed as a sum of eigenfunctions, We give some examples of eigenfunctions of the diffusion generators such as Ornstein-Uhlenbeck, Jacobi and Romanovski-Routh. In particular, two bounds, called the four moments theorem and fourth moment theorem respectively, will be provided for the normal approximation of the case where a random variable F comes from eigenfunctions of a Jacobi generator.

Flap surgery is a common method used to cover defects following tumor ablation, trauma, or infection. However, insufficient vascularity in the transferred flap can lead to flap necrosis and failure. Proper postoperative monitoring is essential to prevent these complications. Recently, research has explored the use of infrared thermal imaging in plastic surgery, leading to its clinical application. This study investigates the use of a forward-looking infrared (FLIR) camera to monitor blood flow in flaps. In the study, 28 rats underwent reverse McFarlane flap surgery, and their flaps were analyzed using a FLIR thermal imaging camera seven days post-surgery. Additionally, thermal images of flaps were taken on postoperative days 0, 1, 2, 3, and 7 in 22 patients. The study focused on temperature differences between normal skin and the perforator compared to the average flap temperature. Results showed that the temperature difference was higher in the necrosis group and increased over time in cases of total necrosis. A lower perforator temperature compared to the flap's average indicated vascular compromise, potentially leading to flap failure. The FLIR camera, being contact-free and convenient, shows promise for understanding and inferring the clinical progression of flaps in postoperative monitoring.

Displacement mapping is a computer graphics technique that enables the design of components with regularly or randomly textured surfaces that can be quickly materialized on a three-dimensional (3D) printer when needed. This approach is in principle more flexible, faster and more economical compared to conventional texturing methods, but the accuracy of the texture depends heavily on the parameters used. The purpose of this study is to demonstrate how to produce a surface-textured part using polygonal (mesh) modeling software and a photopolymerizable resin, and to develop a universal methodology to predict the dimensional accuracy of the model file log combined with a resin 3D printer. The printed components were characterized on a scanning confocal microscope. In the setup used in this study, the mesh size had to be reduced to 10% of the smallest feature size and the textured layer had to be heavily (x4) overexposed to achieve the desired accuracy. As a practical application, two functional stamps with a regular (honeycomb) and a random texture, respectively, were successfully manufactured. The insights gained will be of great benefit in quickly and cost-effectively producing components with innovative patterns and textures for a variety of hobby, industrial and biomedical applications.

Alginate, a biopolymer promising in food, biomedical, pharmaceutical, and electronic materials industries, is characterized by its biodegradability, biocompatibility, low toxicity, and gel-forming properties. It is most abundantly found in brown algae. However, conventional dilute acid and alkali extraction methods face limitations in commercialization due to their long processing time, low throughput, and high solvent requirements. In this study, a microwave-assisted extraction (MAE) process for sodium alginate was designed to improve extraction efficiency. Solid/liquid ratio, extraction temperature, and extraction solvent concentration were major variables affecting sodium alginate extraction from Undaria pinnatifida(sea mustard). They were then statistically optimized using response surface methodology. Under optimal conditions (13.27 g/L, 91.86 ℃, 2.51 %(w/v), and 15 min), the yield was 38.41 %, which was 93.43 % of the theoretical content of sodium alginate in Undaria pinnatifida. Our work has confirmed the productivity and industrial feasibility of efficient extraction of sodium alginate from marine biomass, and we hope that it will serve as an encouraging case for the application of biopolymers as one of the desirable options for alternative petrochemicals to construct a sustainable society.

Attention deficit hyperactivity disorder (ADHD) is a prevalent neurodevelopmental disorder that can diminish the quality of life of both children and adults in academic, occupational, and social contexts. The kynurenine pathway (KP) contains a set of enzymatic reactions involved in tryptophan (TRP) degradation. It is known to be associated with the risk of developing ADHD. This review will address the KP and underlying mechanism of inflammation in ADHD. Potential inflammatory biomarkers reported in the most recent studies are summarized. Although a strong neuroimmunological basis has been established due to advances of recent neurobiological research, the pathophysiology of ADHD remains unclear.

This study emphasizes the necessity of introducing a blockchain-based joint logistics system to strengthen the competency of medical supply chain management (SCM) and tries to develop a healthcare supply chain management (HSCM) competency measurement item through an analytic hierarchy process. The variables needed for using blockchain-based joint logistics are the performance expectations, effort expectations, promotion conditions, and social impact of the UTAUT model, and the HSCM competency results in increased reliability and transparency, enhanced SCM, and enhanced scalability. Word cloud results, analyzing the most important considerations to realize work efficiency among medical industry-related agencies, mentioned numerous words, including sudden situations, delivery, technology trust, information sharing, effectiveness, urgency, etc. This might imply the need to establish a system that can respond immediately to emergency situations during holidays. It could also suggest the importance of real-time information sharing to increase the efficiency of inventory management. Therefore, there is a need of a business model that can increase the visibility of real-time medical SCM through big data analysis. By analyzing the importance of securing reliability based on the blockchain technology in the establishment of a supply chain network for HSCM competency, we reveal that joint logistics can be achieved and synergistic effects can be created by implementing the integrated database to secure HSCM competency. Strengthening partnerships, such as joint logistics, will eventually lead to HSCM competency. In particular, HSCM should seek ways to upgrade its competitive capabilities through big data analysis based on the establishment of a joint logistics system.

Collagen type I production decreases with aging, leading to wrinkles and impaired skin function. Prostaglandin E2 (PGE2), a lipid-derived signaling molecule produced from arachidonic acid by cyclo-oxygenase, inhibits collagen production and induces matrix metallopeptidase 1 (MMP1) expression by fibroblasts in vitro. PGE2-induced collagen expression inhibition and MMP1 promotion are aging mechanisms. This study investigated the role of E-prostanoid 1 (EP1) in PGE2 signaling in normal human dermal fibroblasts (NHDFs). When EP1 expression was inhibited by EP1 small interfering RNA (siRNA), there were no significant changes in messenger RNA (mRNA) levels of collagen, type I, alpha 1 (COL1A1)/MMP1 between siRNA-transfected NHDFs and siRNA-transfected NHDFs with PGE2. This result showed that EP1 is a PGE2 receptor. Extracellular signal-regulated kinase 1/2 (ERK1/2) phosphorylation after PGE2 treatment significantly increased by ~2.5 times. In addition, PGE2 treatment increased the intracellular Ca²⁺ concentration in NHDFs. These results indicated that PGE2 is directly associated with EP1 pathway–regulated ERK1/2 and inositol trisphosphate (IP₃) signaling in NHDFs.

Various peptides or non-structural amino acids are recognized by their specific target proteins and perform biological role in various pathways in vivo. Understanding the interactions between target protein and peptides (or non-structural amino acids) provides key information on the molecular interactions, which can be potentially translated to the development of novel drugs. However, it is experimentally challenging to determine the crystal structure of protein-peptide complexes. To obtain structural information on substrate recognition of peptide-recognizing enzyme, X-ray crystallographic studies were performed using triglycine (Gly-Gly-Gly) as main-chain of peptide. The crystal structure of Parengyodontium album Proteinase K in complex with triglcyine was determined at 1.4 Å resolution. Two different bound conformations of triglycine were observed at the substrate recognition site. The triglycine backbone forms stable interactions with β5-α4 and α5-β6 loops of main-chain. One of the triglycine-binding conformations was identical with the binding mode of a peptide-based inhibitor from a previously reported crystal structure of Proteinase K. Triglycine has potential application X-ray crystallography to identify substrate recognition sites in peptide binding enzymes.

Background The prognostic value of estimated pulse wave velocity (ePWV) has been infrequently explored in high-risk patient groups. Our study aimed to evaluate the prognostic significance of ePWV among patients undergoing percutaneous coronary intervention (PCI) with drug-eluting stent (DES). Methods A total of 4,119 consecutive subjects who underwent PCI with DES (mean age, 67.1 ± 11.6 years and 33.1% were female) were retrospectively analyzed. ePWV was calculated based on the patient’s age and mean blood pressure. Major adverse cardiovascular event (MACE), including cardiac death, non-fatal myocardial infarction, coronary revascularization, and ischemic stroke, were evaluated. Reults During a median follow-up duration of 3.51 years (interquartile range, 1.35 ~ 6.37 years), there were 746 MACE (18.1%). Multivariable analysis showed that higher ePWV was associated with higher MACE incidence (middle tertile vs. the lowest tertile: hazard ratio [HR], 2.49; 95% confidence interval [CI], 1.81-3.42; P < 0.001; the highest tertile vs. the lowest tertile: HR, 6.18; 95% CI, 4.33-8.80; P < 0.001) The inclusion of ePWV data significantly increased the global chi-square values when added to the clinical information (from 96 to 128; P < 0.001). Conclusion ePWV demonstrated a significant association with MACE in patients who underwent DES implantation. Given its relative simplicity to calculate, ePWV could potentially serve as a valuable instrument for stratifying cardiovascular risk within this high-risk patient population.

Directed Energy Deposition (DED) is a process that enables high-speed deposition with a sub-millimeter thickness using laser technology. Thus far, defect studies on additive manufacturing, including DED, have focused mostly on preventing pores and crack defects that reduce fatigue strength. On the other hand, evaporation products, fumes and spatters, generated by the high energy have often been neglected despite being some of the main causes of porosity and defects. In high-quality metal deposition, the problems caused by evaporation products are difficult to solve, but they have not yet caught the attention of metallurgists and physicists. This review examines the effect of the laser, material, and process parameters on the evaporation products to help obtain a high-quality metal film layer in thin-DED.

This study aims to identify the knowledge structure and research trends of soccer psychology research during the last 33 years (1990–2022). Data were obtained from 1,863 papers from the Web of Science database. The data were collected through keyword text mining and data preprocessing to determine the keywords needed for analysis. Based on the keywords, latent Dirichlet allocation-based topic modeling analysis was performed to analyze the topic distribution of papers and explore research trends by topic area. The topic modeling process included four topic area and fifty topics. The “Coaching Essentials in Football” topic area had the highest frequency, but it was not statistically identified as a trend. However, coaching, including training, is expected to continue to be an important research topic, as it is a key requirement for success in the highly competitive elite football world. Interest in the research field of “Psychological Skills for Performance Development” has waned in recent years. This may be due to the predominance of other subject areas rather than a lack of interest. Various high-tech interventions and problem-solving attempts are being made in this field, providing opportunities for qualitative and quantitative expansion. “Motivation, cognition, and emotion” is a largely underrated subject area in soccer psychology. This could be because survey-based psychological evaluation attempts have decreased as the importance of rapid field application has been emphasized in recent soccer-related studies. However, measuring psychological factors contributes to the study of football psychology through a new methodology and theoretical background. Recognizing the important role of psychological factors in player performance and mental management, as well as presenting new research directions and approaches that can be directly applied to the field, will advance soccer psychology research.

In this paper, we consider an economy, in which consumers exhibit unrealistic optimism, and show that such an economy is more likely to undergo early recessions and underinvestment rather than experiencing bubbles or overinvestment. In this model, each consumer incorrectly believes that a negative aggregate preference shock will hit all other consumers, but not herself. When consumers have such an unrealistic optimism, the output price must fall prematurely before the aggregate shock occurs. The reason is that if the price does not plummet today, all consumers would postpone making purchases by falsely expecting that an arbitrage opportunity will arise in the future when the aggregate shock hits the economy, in which case, the output market cannot clear. We also show that the government has the potential to improve welfare of the economy by providing subsidies, if the government judiciously selects the right timing for intervention.

The star matter composed of nucleons deep inside the compact star like a neutron star is believed to be very dense and various new types of concepts and physical phenomena due to the nontrivial strong correlations are naturally expected. Peudo-conformality in dense star matter has been discussed recently assuming the hidden underlying scale symmetry, which is partly supported by the recent discussions of infrared conformal window of QCD. It is found that the appearance of dilaton and the dilatonic mean field calculation of nucleonic matter lead to the density independent nucleon mass at higher density regime than normal nuclear matter density. Non-vanishing constant nucleon mass can be considered as a chiral invariant mass of the parity doublet model, in which the chiral symmetry is manifested even in the massive nucleon sector provided with a parity doubling. In this paper we will discuss how the chiral and scale symmetry are correlated to lead the parity doublet symmetry inside the core of the compact star. A simple schematic model is adopted. The star matter at T=0 is basically composed of the nucleons. As a first approximation, they can be treated as free fermions with the effective mass filled up to fermi surface. There is a nontrivial feature due to the interplay between vector meson and nucleon(or equivalently dilaton, χ). The trace of energy momentum tensor approaches density independent, the pseudo-conformal phase. Local fluctuations inside the star matter will be travelling with the speed of sound which depends on the equation of state. In the pseudo-conformal phase, the speed of sound approaches to the conformal velocity for the scale symmetric matter, vc=13c. The excitations of the parity doublets in the compact star matter as an emerging phenomena in pseudo-conformal phase will be discussed in connection to the chiral symmetry. The possible implication on the corespondence of hadrons to quark degrees of freedom will be briefly discussed.

The TRPV3 calcium ion channel is vital for maintaining skin health and has been associated with various skin-related disorders. Since TRPV3 is involved in the development of skin inflammation, inhibiting TRPV3 could be a potential treatment strategy. Alpha-mangostin isolated from Garcinia mangostana L. extract exhibits diverse positive effects on skin health; however, the underlying mechanisms remain obscure. This study investigated the TRPV3-inhibitory properties of alpha-mangostin on TRPV3 hyperactive mutants associated with Olmsted syndrome and its impact on TRPV3-induced cytokine secretion and cell death. Our findings demonstrate that alpha-mangostin effectively inhibits TRPV3, with an IC50 of 0.077 ± 0.013 μM, showing inhibitory effects on both wild-type and mutant TRPV3. TRPV3 inhibition with alpha-mangostin decreased calcium influx and cytokine release, protecting cells from TRPV3-induced death. These results indicate that alpha-mangostin reduced inflammation in TRPV3-activated skin keratinocytes, suggesting that alpha-mangostin could be potentially used for improving inflammatory skin conditions such as dermatitis.

The plant Allium hookeri, belonging to the Allium genus, has a history of being used both as a common food ingredient and in herbal medicine. It has recently been reported to have anti-oxidant and anti-inflammatory effects. A. hookeri has been also shown to exhibit neuroprotective and anti-neuroinflammatory activities, but the active compounds responsible for these effects have not been identified in previous studies. This study aimed to perform a metabolite profiling using an HRESI-qTOF MS/MS-based molecular networking approach and identify the active compounds from A. hookeri that target senescent cell-associated secretory phenotype (SASP) inhibitory effects, which contribute to neuroprotective activities. As a result, ten compounds, including one new flavonoid (2) and nine known compounds (1 and 3–10), were identified, and their biological activity was tested. The most potent compound was N-trans-feruloyltyramine (7), which inhibited SASP markers and contributed to the senomorphic activities of A. hookeri. These findings suggest that the phenolamides from A. hookeri could be a promising source of bioactive compounds for preventing senescence-associated diseases.

Maxillomandibular advancement (MMA) is a surgical intervention that reduces the symptoms of obstructive sleep apnea via anterior repositioning of the upper and lower jaws. Pre-operative orthodontic alignment is often a critical component in aiding MMA. Orthodontia are important in intraoperative anchorage for intermaxillary fixation, healthy post-operative occlusion, and post-operative skeletal stability. Sequential clear aligners (SCA) refer to removable orthodontic appliances that are replaced at regular intervals to stimulate dental migration without the use of bonded hardware. These aligners have demonstrated efficacy in aiding orthognathic surgery for dentofacial deformities, which share some technical similarities with MMA for OSA. Here, we explore the treatment protocol for MMA followed by post-operative SCA treatment. Our experiences show that post-operative orthodontic treatment with SCAs results in similarly successful post-operative surgical outcomes given that the patient’s pre-operative occlusion is stable.

Recently, “mature” silkworms (MS) of Bombix mori have been considered as a potential nutraceutical, with a number of health benefits reported for steamed and lyophilized MS powder (SMSP). However, no obesity-related effects have been reported for SMSP. In the present study, anti-obesity effects of SMSP were investigated in adult mice in vivo, aged 12 weeks at the onset of drug administration, fed normal diet (ND) and high-fat diet (HFD), respectively, for 12 weeks. SMSP significantly suppressed body weight gain, intra-abdominal adipose tissue, and food efficiency in both ND-fed and HFD-fed adult mice. In addition, SMSP significantly decreased food intake and liver weight in HFD-fed mice, indicating that SMSP suppressed appetite and simultaneously reduced the conversion of feed into body weight in HFD-fed mice. SMSP also significantly lowered serum levels of glucose, triglyceride, total cholesterol, low-density lipoprotein cholesterol, asparagine transaminase, alanine transaminase, and alkaline phosphatase. However, SMSP had no significant effect on the weights of kidney, spleen, and thymus and serum levels of blood urea nitrogen and creatinine. Taken together, the above results suggest that SMSP has potent anti-obesity effects and is safe for long-term use as a potential therapeutic and/or nutraceutical in both obese patients and non-obese individuals.

Juvenile hormones (JH) play crucial roles in insect development, reproduction, and other physi-ological functions. Because JH is specific to arthropods, including insects, it has long been stud-ied for use in pest control. Accordingly, this study aimed to identify the substances that act as JH disruptors from edible plants. Curcuminoids generally exhibit a wide range of biological ac-tivities, such as antioxidant, anti-inflammatory, antibacterial, and insecticidal properties, and they exhibit insect growth inhibitory effects. Demethoxycurcumin and bisdemethoxycurcumin, two curcuminoids from the turmeric plant Curcuma longa L. inhibit the formation of a metho-prene-tolerant (Met)–Taiman (Tai) heterodimer complex as shown through in vitro yeast two-hybrid assays. An artificial diet containing 1% (w/v) demethoxycurcumin or bisdemethox-ycurcumin reduced the number of larvae, leading to no pupal development. Building on our re-sults regarding curcuminoids, researchers can use our study as a reference to develop eco-friendly pesticides.

This study was designed to extend the literature on multicomponent interventions for the children of deaf adults (CODA) population. This study used two evidence-based behavior intervention strategies: pre-session pairing (PSP) and independent group contingency (GC). These strategies have been successfully used to decrease off-task behavior in elementary school children with various abilities and diverse backgrounds. However, the research on multicomponent interventions has yet to examine their effects on the CODA population in inclusive classrooms. This study used a concurrent multiple baseline design across participants with an ABC sequence to examine teacher-implemented PSP with independent GC in reducing the off-task behavior of three CODAs in an inclusive classroom at a public elementary school. The results show that the intervention successfully decreased off-task behavior for all participating CODAs. The results suggest that CODAs can adapt to classroom rules and expectations when PSP and independent GC are systematically applied to them in classrooms.

The introduction of electrical vehicle charging infrastructure including EV charger, renewable energy resource at secondary feeder in distribution system has been increased as one of countermeasure for global environmental issues. However, the Electric Vehicle Charging (EVC) infrastructure may act as the peak load in distribution system, which can adversely impact on the voltage stability when the electric vehicle is quickly charged. Therefore, to keep within the limit capacity of secondary feeder and allowable limit for feeder voltage, this paper proposes a stabilization method by the Energy Storage System (ESS) control strategy at secondary feeder in order to be not violated over than lower and upper limit. Also, this paper presents the estimation method to keep the proper standard value of State of Charge (SOC). From the simulation results, the voltage stabilization operation by ESS should make the feeder voltages of the distribution system(secondary feeder) introduced EVC Infra keep better voltage conditions, also estimation method to keep the proper standard value is confirmed that the SOC of ESS when is the standby condition could be exactly kept within the proper reference range.

Axonal degeneration resulting from optic nerve damage can lead to the progressive death of retinal ganglion cells (RGCs), culminating in irreversible vision loss. We contrasted two methods for inducing optic nerve damage: optic nerve compression (ONCo) and optic nerve crush (ONCr). These were assessed for their respective merits in simulating traumatic optic neuropathies and neurodegeneration. We also administered neural progenitor cells (NPCs) into the subtenon space to validate their potential in mitigating optic nerve damage. Our findings indicate that both ONCo and ONCr successfully induced optic nerve damage, as shown by increased ischemia and expression of genes linked to neuronal regeneration. Post NPCs injection, recovery in the expression of neuronal regeneration-related genes was more pronounced in the ONCo model than in the ONCr model, while inflammation-related gene expression saw a better recovery in ONCr. In addition, proteomic analysis of R28 cells in hypoxic conditions identified Vps35 and Syntaxin12 genes. Vps35 preserved mitochondrial function in ONCo, while Syntaxin12 appeared to restrain inflammation via the Wnt/β-catenin signaling pathway in ONCr. NPCs managed to restore damaged RGCs by elevating neuroprotection factors and controlling inflammation through mitochondrial homeostasis and Wnt/β-catenin signaling in hypoxia-injured R28 cells and in both animal models. Our results suggest that ischemic injury and crush injury cause optic nerve damage via different mechanisms, which can be effectively simulated using ONCo and ONCr, respectively. Moreover, cell-based therapies such as NPCs may offer promising avenues for treating various optic neuropathies, including ischemic and crush injuries.

Polypyrrole (PPy)-capped caped silver nanowire (Ag NW) nanomaterials (core–shell rod-shaped Ag NW@PPy) were synthesized suing a one–port suspension polymerization technique. The thickness of PPy layer on the 50-nm-thickness/15-μm-length Ag NW was effectively controlled to 10, 40, 50, and 60 nm. Thin films cast from one-dimensional conductive Ag NW@PPy formed a three-dimensional (3-D) conductive porous network structure and provided excellent electrochemical performance. The 3-D Ag NW@PPy network can significantly reduce the internal resistance of the electrode and maintain structural stability. As a result, a high specific capacitance of 625 F/g at a scan rate of 1 mV/s was obtained from the 3-D porous Ag NW@PPy composite film. The cycling performance over a long period exceeding 10,000 cycles was also evaluated. We expect that our core–shell-structured Ag NW@PPy composites and their 3-D porous structure network films can be applied as electrochemical materials for the design and manufacture of supercapacitors and other energy storage devices.

Microbial production is a promising method that can overcome major limitations in conventional methods of lycopene production, such as low yields and variations in product quality. Significant efforts have been made to improve lycopene production by engineering either the 2-C-methyl-D-erythritol 4-phosphate (MEP) pathway or mevalonate (MVA) pathway in microorganisms. To further improve lycopene production, it is critical to utilize metabolic enzymes with high specific activities. Two enzymes, 1-deoxy-D-xylulose-5-phosphate synthase (Dxs) and farnesyl diphosphate synthase (IspA), are required in lycopene production using MEP pathway. Here, we evaluated the activities of Dxs and IspA of Vibrio sp. dhg, a newly isolated and fast-growing microorganism. Considering that the MEP pathway is closely related to the cell membrane and electron transport chain, the activities of the two enzymes of Vibrio sp. dhg were expected to be higher than the enzymes of E. coli. We found that Dxs and IspA in Vibrio sp. dhg exhibited 1.08-fold and 1.38-fold higher catalytic efficiencies, respectively. Consequently, the heterologous overexpression improved the specific lycopene production by 1.88-fold. Our findings could be widely utilized to enhance production of lycopene and other carotenoids.

This article explores the behavioral geography of the Hajj pilgrimage, focusing on the impact of the physical environment on pilgrims' behavior. Using qualitative research and analyzing religious literature and online publications, the study reveals significant findings. The spatial arrangement of the Grand Mosque, including the central courtyard and pillars, influences pilgrims' behavior during the Tawaf ritual. Environmental factors such as crowds and noise affect pilgrims' experiences, evoking anxiety while enhancing the ceremony's spiritual significance. Cultural and religious beliefs also shape pilgrims' behavior during the circumambulation. This study provides valuable insights into the multifaceted factors shaping pilgrims' behavior during the Hajj, including spatial organization, cultural influences, and social interactions. The findings can inform improvements in infrastructure, crowd management, and services to enhance the overall pilgrimage experience.

Chromatin structure plays a fundamental role in regulating gene expression, with histone modifiers shaping the structure of chromatin by adding or removing chemical changes to his-tone proteins. The p53 transcription factor controls gene expression, binds target genes, and regulates their activity. While p53 has been extensively investigated in the context of cancer research, its association with histone modifiers has received limited attention. This review ex-plores the interplay between histone modifiers and p53 in regulating gene expression. We discussed how histone modifications can influence how p53 binds to target genes and how this interplay can be disrupted in cancer cells. This study provides insights into the complex mechanisms underlying gene regulation and their implications for potential cancer therapy.

Characters are one of the most important elements in composing digital animation. The appear-ance and voice of a character should be designed to express the personality and values of the character. However, it is not easy for animation producers to harmoniously match the appear-ance and voice of a character. Advances in deep learning technology have made it possible to overcome this limitation. To achieve this, firstly, an audio-visual dataset of characters is required. In this study, we construct and verify a Korean audio-visual dataset consisting of frontal face im-ages of various characters and short voice clips. We developed an application that can automati-cally extract the frontal face image and a short voice clip of a character by collecting videos up-loaded to YouTube. Through this, a dataset consisting of a total of 1,522 face images and a total of 7,999 seconds of voice clips was built based on 490 characters. Furthermore, we automatically la-bel characters by gender and age to validate the dataset. The dataset built in this study is expected to be used in various deep learning fields, such as classification, generative adversarial networks, and speech synthesis.

To identify gender- and age-related associations between adult dental checkups and unmet dental care needs, we analyzed data of 14,000 participants, ages ≥ 19, from the 7th Korea National Health and Nutrition Examination Survey (2016–2018) (KNHANES VII). Data was collected via self-report questionnaires and interviews. Complex sample chi-square test and multiple logistic regression analysis indicated 31.7% of participants had unmet dental care needs; in the prior 12months, 67.1% had not utilized dental services, and 43.3% had not received dental checkups. Odds ratios (ORs) for dental checkups and unmet dental needs were 8.87 (CI:7.80–10.09, p < 0.001) for those who used dental services and 1.28 (CI: 1.13–1.44, p < 0.001) for those who had not. Significant age-dependent associations between those not receiving dental checkups and the rate of unmet dental care include men and women aged 50–59 years (OR: 1.77; CI = 1.22–2.58 and OR: 1.43; CI: 1.02–2.02; p = 0.040, respectively) and women ≥ 70 years (OR = 1.79, CI = 1.20–2.66, p = 0.004). Reducing unmet dental care needs requires greater public health promotion and education regarding regular dental checkups; additional practical strategies could enhance dental checkup compliance.

An effective method for coating textile fabrics with porous materials is proposed, and the removal rates of nitrogen oxides (NOx), sulfur oxides (SOx), and fine dust particles in the coated textile fabrics are evaluated. The textile fabrics made of polyester are used to effectively reduce fine dust particles through static electricity. Zeolite and coconut shell activated carbon are used as porous material to reduce SOx and NOx, respectively. The effects of the epoxy content and dilution solution types on the SOx removal rate of textile fabrics coated with zeolite are evaluated to determine the optimum coating conditions. In addition, the effects of external environmental conditions, such as washing and freeze thawing, on the SOx and NOx removal rates of the textile fabrics coated with porous materials using the optimum coating conditions are examined. The test results show that the SOx removal rate of textile fabrics coated with zeolite decreases with the increase in the epoxy content. The decrease is 2.9 times larger for textile fabrics coated using deionized water than those coated using isopropyl alcohol. After one wash, the SOx removal rate decreases dramatically. However, the decrease is reduced by 16% when the epoxy content ratio is increased by 0.5%. The effects of washing and freeze thawing on the SOx and NOx removal rates of textile fabrics coated using the deionized water diluted with the epoxy content ratio of 2% are minimal. Consequently, to maintain stable SOx and NOx removal rates under external environmental conditions such as washing and freeze thawing, 98% deionized water dilution and 2% epoxy content ratio are required for the optimum coating of textile fabrics with zeolite and coconut shell activated carbon.

Regardless of country and age, the importance of history education is always being emphasized. Although the importance of history education is being emphasized in Korea, there are many difficulties in getting students to understand history properly through school classes alone, and it is also difficult to attract students to participate in classes. The effectiveness of education using games has been proven 20 years ago, and the demand for game-based education is gradually increasing in the current education world, which is becoming more open. In this paper, based on the effects proven through research on the existing game-based education, the improvement of historical thinking ability, experiential history learning, and the problems of game-based education introduced in the ESN report and the discomfort of teachers who participated in the education were improved. A plan was suggested to select and use games suitable for basic education. In this thesis, we selected a history game with a clear historical and periodic background and without distortion of history, and experimented with teaching using games focusing on historical thinking and empirical history learning. The learning achievement of textbook-based education was compared.

Regardless of country and age, the importance of history education is always being emphasized. Although the importance of history education is being emphasized in Korea, there are many difficulties in getting students to understand history properly through school classes alone, and it is also difficult to attract students to participate in classes. The effectiveness of education using games has been proven 20 years ago, and the demand for game-based education is gradually increasing in the current education world, which is becoming more open. In this paper, based on the effects proven through research on the existing game-based education, the improvement of historical thinking ability, experiential history learning, and the problems of game-based education introduced in the ESN report and the discomfort of teachers who participated in the education were improved. A plan was suggested to select and use games suitable for basic education. In this thesis, we selected a history game with a clear historical and periodic background and without distortion of history, and experimented with teaching using games focusing on historical thinking and empirical history learning. The learning achievement of textbook-based education was compared.

Stresses due to drought and high soil salt content are the most severe threats to global rice pro-duction, causing a significant decline in rice yield. Therefore, this study examined the effects of treatment with various plant extracts on the stresses on rice plants associated with drought and high salinity. Additionally, this study examined various physiological and biochemical parameters such as growth, photosynthetic activity, chlorophyll content, and lipid peroxidation in rice plants after treatment with selected plant extracts under drought and salt stress conditions. Out of the eleven extracts tested, four extracts, namely soybean leaf, soybean stem, Chinese chive, and onion extracts, were found to effectively reduce drought stress. A reduction of only 24-37% in shoot fresh weight was observed in rice plants under drought stress that were treated with these ex-tracts compared to the 78% reduction observed in control plants. In addition, rice plants under salt stress which were treated with soybean leaf, soybean stem, moringa (Moringa oleifera), and Undaria pinnatifida extracts were observed to have lower reductions in shoot fresh weight (3-23%) com-pared to the control plants (43%). The effectiveness varied with the concentrations of the plant ex-tracts. Water content was higher in the rice plants treated with extracts than in the control plants after 6 days of drought and salt stress, but not after 4 days of drought and salt stress. Although photosynthetic efficiency (Fv/Fm) and electron transport rate (ETR), and the content of pigments (chlorophyll and carotenoid) varied based on the types and levels of stress and the extracts that the rice plants were treated with, generally photosynthetic efficiency and pigment contents were higher in the treated rice compared to control plants than in the control plants. Reactive oxygen species (ROS) such as the superoxide radical, hydrogen peroxide (H2O2), and malondialdehyde (MDA) levels increased as the duration of the period of stress increased. ROS and MDA levels were lower in the treated rice compared to control plants. Proline and soluble sugar accumulation also increased as the duration of the stressperiod increased. However, proline and soluble sugar ac-cumulation were lower in the treated rice compared to control plants. Generally, all the parame-ters investigated in this study were similar regardless of the plant extract used for treating the rice plants. Thus, extracts found to be effective in this study can be used to alleviate the adverse effects of stress on rice crops associated with drought and high salinity soil.

The formation of atroposelective biaryl compounds in plants and fungi is well understood; however, the polyketide aglycone synthesis and dimerization in bacteria remain unclear. Thus, the biosynthetic gene cluster (BGC) responsible for antibacterial setomimycin production from Streptomyces nojiriensis JCM3382 was examined in comparison with the BGCs of spectomycin, julichromes, lincolnenins, and huanglongmycin. Setomimycin BGC includes post-PKS assembly/cycling enzymes StmD (C-9 ketoreductase), StmE (aromatase), and StmF (thioesterase) as key components. The heterodimeric TcmI-like cyclases StmH and StmK are proposed to aid in forming the setomimycin monomer. In addition, StmI (P-450) is predicted to catalyze biaryl coupling of two monomeric setomimycin units, with StmM (ferredoxin) specific to setomimycin BGC. The roles of StmL and StmN, part of the nuclear transport factor 2 (NTF-2)-like protein family and unique to setomimycin BGCs, could particularly interest biochemists and combinatorial biologists. α-Glucosidase, a key enzyme in type 2 diabetes, hydrolyzes carbohydrates into glucose, thereby elevating blood glucose levels. This study aimed to assess the α-glucosidase inhibitory activity of EtOAc extracts of JCM 3382 and setomimycin. The JCM 3382 EtOAc extract and setomimycin exhibited greater potency than the standard inhibitor, acarbose, with IC50 values of 285.14 ± 2.04 μg/mL and 231.26 ± 0.41 μM, respectively. Kinetic analysis revealed that setomimycin acts as a competitive inhibitor of α-glucosidase. Molecular docking demonstrated two hydrogen bonds with maltase-glucoamylase chain A residues Thr205 and Lys480 (binding energy = −6.8 kcal·mol⁻¹), two π-π interactions with Trp406 and Phe450, and one π-cation interaction with Asp542. Residue-energy analysis highlighted Trp406 and Phe450 as key in setomimycin's binding to maltase-glucoamylase. These findings suggest that setomimycin is a promising candidate for further enzymological research and potential antidiabetic therapy.

We used a metal-organic chemical vapor deposition technique to synthesize a boron-doped reduced graphene oxide (B-rGO) material with various electrical characteristics, dependent on simultaneous reduction and doping procedures. The effect of the doping level on the B bonding in the reduced graphene oxide (rGO) layer controlled by the annealing temperature was investigated using X-ray photoelectron spectroscopy (XPS). The XPS data indicated that the B-rGO layer had a higher B concentration and a considerable number of O-B bonds as a result of the appreciable annealing temperature, which resulted in a decreased work function and Schottky contact between B-rGO and n-type Si. Owing to the higher proportion of B-C and B-C3 bonding in the B-rGO device than that in the rGO/Si device, the lower Schottky barrier height of the B-rGO/n-Si vertical junction photodetector resulted in a higher responsivity. This work suggests a facile method of B doping to alter the electrical properties of graphene materials.

This study aimed to elucidate the antibacterial efficacy and unique chemical compositions generated from plasma-activated water (PAW) when utilized a novel vaginal cleansing device. We conducted an analysis of antibacterial activity against probiotics and several chemical compositions including ions under various operational parameters of PAW, including electrical power (12 and 24 V), treatment duration (1, 10, and 20 min), and stay duration (immediate, 30 and 60 min). Our findings revealed that as treatment duration increased, hypochlorous acid (HOCl), Ca2+, and Mg2+ concentrations increased and Cl−concentrations decreased. Higher electrical power and longer treatment duration resulted in increased HOCl levels, which acts to prevent the growth of general microorganisms. Notably, PAW exhibited no antibacterial effects against a type of probiotic, Lactobacillus reuteri that produces lactic acid for vaginal health. This result demonstrated the ability of the vaginal cleaning device to generate ions, primarily HOCl and some cations (Ca2+ and Mg2+), thereby providing vaginal mucosa protecting and cleansing effects with the vaginal environment.

Many biological functions of curcumin have been reported. As certain bioactivities of curcumin are eliminated by antioxidants, reactive oxygen species generated by curcumin have been suggested as a relevant mechanism. In the present study, effects of different types of antioxidants on stability and bioactivities of curcumin were analyzed. High concentrations (>4mM) of the thiol antioxidants including N-acetylcysteine (NAC), glutathione (GSH) and β-mercaptoethanol accelerated decomposition of curcumin and other curcuminoids; Submillimolar levels (<0.5 mM) of GSH and NAC rather improved their stability. Ascorbic acid or superoxide dismutase also stabilized curcumin regardless of their concentration. Cellular levels and bioactivities of curcumin including cytotoxicity and induction of heme oxygenase-1 were significantly reduced in the presence of 8 mM of GSH and NAC. The effects were enhanced in the presence of submillilmolar GSH and NAC, or non-thiol antioxidants. The present results indicate that antioxidants with reduced thiol group could directly interact with α, β-unsaturated carbonyl moiety of curcuminoids and modulate their stability and bioactivity.

In the field of visualization, understanding users’ analytical process is important to determine the effectiveness of a designed visualization application. To understand the users’ analytical process, numerous studies have been performed to capture and analyze user interactions. Although many studies have emphasized the importance of analyzing user interactions to understand users’ analytical reasoning processes, few have successfully linked these interactions to users’ reasoning processes. This paper introduces an approach that bridges this gap by correlating semantic user interactions with analysis decisions through an interactive wire transaction analysis system and a visual state transition matrix. With the designed analysis system, interactive analysis can be performed to evaluate financial fraud in wire transactions. It also allows the mapping of captured user interactions and analytical decisions back onto the visualization, revealing users’ distinct results. The visual state transition matrix further aids to help understanding users’ analytical flows, revealing their decision-making processes. Classification machine learning algorithms are applied to assess the effectiveness of our approach in understanding analysts’ strategies by connecting them to their decisions. From the study, we observed an average of 72% accuracy in clearly classifying the semantic user interactions. For classifying individual decisions, we observed an average of 70% classification accuracy. This emphasizes the importance of capturing semantic user interactions to understand users’ analytical processes. Overall, it is determined that the proposed approach not only enhances the understanding of analytical behaviors but also offers a robust approach for evaluating user interactions in visualization tools.

This study was conducted to recover valuable metals (silicon and silver) using acid leaching and substitution reactions with copper powder from the pulverized solar cell separated from the PV ribbon. Leaching experiments were conducted according to nitric acid concentration by molar solution as 1M, 2M, and 3M using an ultrasonic cleaner at a reaction temperature of 60 °C for the leaching times of 30 to 120 minutes. Si phases were detected at all leaching reaction times, it was confirmed that the aluminium was removed effectively if the nitric acid leaching time was more than 30 minutes, and silicon with a purity above 99% could be recovered. The silver was precipitated by adding copper, which has greater reducibility than Cu, Al, Si, Pb, and Sn. When the addition of copper powder was 0.75 and 1.0 g, precipitate was produced 0.23 and 0.55 g, respectively. The optimal condition for the recovery of silver by the addition of copper powder was 1 g, where is recovery rate reached 93.3%.

To address the limitations of the current anodes of Li+-ion batteries (LIBs), a Ge/GeO2/Carbon (Ge@GeO2-C) composite was designed by introducing a high-energy ball-milling process for advanced LIBs. Ge@GeO2-C is prepared and characterized by XPS, XRD, SEM, and TEM, which facilitate synthesis and provide controllability with respect to milling time. Interestingly, as the ball-milling time increased, the proportion of metallic Ge increased during the carbon thermal reduction reaction. The electrochemical characteristics of Ge@GeO2-C are assessed using differential capacity analysis (dQ/dV) and galvanostatic charge-discharge techniques to confirm its viability as an anode material in LIBs. The results demonstrated decent initial and secondary capacities of approximately 1800 mAh g-1 (for the first cycle) and 838 mAh g-1 (for the second cycle) at a rate of C/60 by the reaction between Ge and the Li-Ge complex. Furthermore, postmortem characterization was performed to gain an understanding of the material, suggesting future prospects for advanced LIBs.

Geniposide is a major ingredient in the herb gardenia, and this study investigated effects of geniposide on lipopolysaccharide-stimulated macrophages (RAW 264.7). Griess reagent assay, Fluo-4 calcium assay, dihydrorhodamine 123 assay, multiplex cytokine assay, quantitative RT-PCR, and flow cytometry assay were done using RAW 264.7. Data showed that geniposide at concentrations of 10, 25, and 50 μM reduced significantly levels of nitric oxide, intracellular Ca2+, and hydrogen peroxide in lipopolysaccharide-stimulated RAW 264.7. Multiplex cytokine assay represented geniposide at concentrations of 10, 25, and 50 μM meaningfully suppressed levels of IL-6, G-CSF, MCP-1 and MIP-1α in RAW 264.7 provoked by lipopolysaccharide; additionally, geniposide at concentrations of 25 and 50 μM meaningfully suppressed levels of TNF-α, IP-10, GM-CSF, and MIP-1β. Flow cytometry assay represented that geniposide reduces significantly the level of phosphorylated P38 MAPK in RAW 264.7 provoked by lipopolysaccharide. Geniposide meaningfully suppressed lipopolysaccharide-induced transcription of inflammatory target genes such as Chop, Jak2, Fas, c-Jun, c-Fos, Stat3, Nos2, Ptgs2, Gadd34, Asc, Xbp1, Nlrp3, and Par-2. Taken together, geniposide exerts anti-inflammatory effects in lipopolysaccharide-stimulated macrophages via calcium-P38 MAPK pathway.

Ensuring safe, high-quality food is an ongoing priority, yet consumers face heightened risk from foodborne pathogens due to extended supply chains and climate change in food industry. Nanomaterial-based assays are popular and have recently been developed to ensure food safety and high quality. This review discusses strategies for using nanomaterials in colorimetric biosensors. Localized surface plasmon resonance (LSPR) biosensors are commonly utilized for colorimetric biosensing. Several emerging technologies aimed at simple and rapid immunoassays for onsite applications have been introduced in the food industry. In the foreseeable future, field-friendly colorimetric biosensors could be adopted in food monitoring systems. The onsite and real-time detection of possible contaminants and biological substances in food and water is essential to ensure human health safety.

Background: Diffuse large B-cell lymphoma is the most common type of non-Hodgkin's lymphoma. Due to the variety of clinical manifestations, accurate diagnosis can be challenging. Here, we present a case of DLBCL that was initially misdiagnosed as a hematoma, highlighting the importance of considering malignancy in the setting of non-responsive soft tissue swelling. Methods: A 76-year-old man presented to the emergency department with right periorbital swelling and ecchymosis. The symptoms first appeared after an injury and did not resolve spontaneously. The patient was taking warfarin for atrial fibrillation. A facial bone CT revealed a large irregular homogeneous mass. An extraconal hematoma was suspected based on clinical history and radiologic findings. Incision and drainage were performed, resulting in evacuation of old blood. Despite continued drainage, the patient's symptoms worsened. A comparison with the previous CT revealed an increase in the size of the lesion. As a result, a surgical excisional biopsy was performed. Results: Biopsy of the mass showed a diffuse infiltrate of lymphocytes around the tissue. The diagnosis of diffuse large B-cell lymphoma was confirmed pathologically. The patient was referred to hematology for further management. Conclusions: DLBCL is a rare disease associated with a poor prognosis. Due to the previous injury and the use of anticoagulants, the patient was initially misdiagnosed as having a hematoma. This delayed the prompt diagnosis and affected the timing of treatment initiation. We must be aware that a malignant mass is a potential cause of unresponsive soft tissue swelling.

Serial femtosecond crystallography (SFX) using an X-ray free-electron laser (XFEL) enables determination of room-temperature structures without causing radiation damage. Using an optical pump-probe or mix-and-injection, SFX enables the intermediate state visualization of a molecular reaction. In SFX experiments, serial and stable microcrystal delivery to the X-ray interaction point is vital for reasonable data collection and efficient beam time. The Pohang Accelerator Laboratory X-ray Free Electron Laser (PAL-XFEL) facility established SFX instruments at a nanocrystallography and coherent imaging (NCI) experimental station. Various sample delivery methods, including injection, fixed-target scanning, and hybrid methods, have been developed and applied to collect XFEL diffraction data. Herein, we review the currently available sample delivery methods for SFX at the NCI experimental station at the PAL-XFEL. This article will help PAL-XFEL users access the SFX system for their experiments.

Water management can improve the quality of valuable ecosystem services but can be costly to implement and the management costs are covered by national taxes collected by water users. Based on 30 valuation studies of water quality improvement from the Environmental Valuation Information System (EVIS) database provided by Korea Environment Institute (KEI), a meta-regression analysis was employed to measure the benefits that major river basins provided to the society. We compare these benefits to the costs, namely River Management Funds (RMFs) which are financial resources to support a variety of projects for managing and improving upstream water quality. Based on benefit-cost comparison, this study evaluates the efficiency of water resource management in South Korea. This study also provides policy options that are helpful to maintain the sustainability of water resource by improving the planning and performance of water management in the long run.

Breath volatile organic compound analysis is a non-invasive tool for assessing health status; the compositional profile of these compounds in the breath of patients with chronic kidney disease is believed to change with decreasing renal function. We aimed to identify breath volatile organic compounds for recognizing patients with chronic kidney disease. Using thermal desorption-gas chromatography-mass spectrometry, untargeted analysis of breath markers was performed using breath samples of healthy controls (n=18) versus non-dialysis (n=21) and hemodialysis (n=12) patients with chronic kidney disease in this cross-sectional study. A total of 303 volatile organic compounds alongside 12 clinical variables were used to determine the breath volatile organic compound profile. Metabolomic analysis revealed that age, systolic blood pressure, and fifty-eight breath volatile organic compounds differed significantly between the chronic kidney disease group (non-dialysis + hemodialysis) and healthy controls. Thirty-six volatile organic compounds and two clinical variables that showed significant associations with chronic kidney disease in the univariate analysis were further analyzed. Different spectras of breath volatile organic compounds between the control and chronic kidney disease groups were obtained. Multivariate model incorporating age, 2-methyl-pentane, and cyclohexanone showed high performance (accuracy, 86%) in identifying patients with chronic kidney disease, with odds ratios (95% confidence interval) P-values of 0.18 (0.07-2.49) 0.013; 2.10 (0.94-2.24) 0.025; and 2.31 (0.88–2.64) 0.008, respectively. Hence, renal dysfunction-associated characteristic profiles of breath volatile organic substances can be used as non-invasive markers to screen for chronic kidney disease.

Drug-induced liver injury (DILI) stands as a significant cause of drug attrition. To mitigate clinical DILI risks, assessing drugs using human liver models is crucial since animal studies may fall short due to species-specific liver pathway variations. Cell-based preclinical hepatotoxicity testing is often pertinent. In the present study, cells from a human liver cancer line (HepG2, HepaRG) were cultured in both formats of 2D and 3D spheroids to explore their responses to drugs. Liver-specific marker expressions across cell lines and culture formats were also examined to assess disparities in drug-induced liver injury marker expressions. In cytotoxicity assays, HepG2 cells exhibited heightened sensitivity to amiodarone HCl, while HepaRG cells showed greater sensitivity to acetaminophen. Generally, 2D cultures were more responsive to drugs than 3D cultures. Consistency was observed between cytotoxicity assays and liver injury markers AST and ALT. Variations were also noted in liver cell marker secretion, with albumin and urea concentrations declining post-drug treatment, particularly with higher baseline expression in HepaRG cells and 3D cultures. Additionally, mRNA expression levels of CYP enzymes involved in hepatocellular drug metabolism were compared following treatment with enzyme inducers. CYP1A2 and CYP2C9 were not expressed in HepG2 cells. On the other hand, CYP3A4 was expressed higher in 3D culture than in 2D culture. HepaRG cells exhibited significantly increased expression of all three enzymes post-treatment. Notably, enzyme expression was notably higher in 3D cultures than in 2D cultures. Collectively, these findings suggest that HepaRG cells and 3D cultures hold promise for evaluating DILI during early-stage drug development.

The study of pain requires a balance between subjective methods that rely on self-reports and complementary objective biometrics that ascertain physical signals associated with subjective accounts. There are at present no objective scales that enable the personalized assessment of pain, as most work involving electrophysiology rely on summary statistics from a priori theoretical population assumptions. Along these lines, recent work has provided evidence of differences in pain sensations between participants with Sensory Over Responsivity (SOR) and controls. While these analyses are useful to understand pain across groups, there remains a need to quantify individual differences more precisely in a personalized manner. Here we offer new methods to characterize pain using the moment-by-moment standardized fluctuations in EEG brain activity centrally reflecting the person’s experiencing temperature-based stimulation at the periphery. This type of gross data is often disregarded as noise, yet here we show its utility to characterize the lingering sensation of discomfort raising to the level of pain, individually, for each participant. We show fundamental differences between the SOR group in relation to controls and provide an objective account of pain congruent with the subjective self-reported data. This offers the potential to build a standardized scale useful to profile pain levels in a personalized manner across the general population.

The calmodulin-binding transcription activators (CAMTAs) mediate transcriptional regulation of development, growth, and responses to various environmental stresses in plants. To characterize the biological processes of soybean CAMTA (GmCAMTA) family members in response to abiotic stress, we identified 15 GmCAMTA genes from soybean (Glycine max L.) and investigated their roles in the abiotic stress response. The transcriptions of GmCAMTAs exhibited distinct circadian regulation patterns and were expressed differently in response to salt, drought, and cold stresses, except ABA. Interestingly, the expression levels of GmCAMTA2, GmCAMTA8, and GmCAMTA12 were higher in stem tissue than in other soybean tissues. To determine the roles of GmCAMTAs in the regulation of developmental processes and stress responses, we isolated GmCAMTA2 and GmCAMTA8 cDNAs from soybean and generated Arabidopsis overexpressing transgenic plants. The GmCAMTA2-OX and GmCAMTA8-OX plants showed hypersensitivity to drought stress. The water in the leaves of GmCAMTA2-OX and GmCAMTA8-OX plants was lost faster than that in WT plants under drought stress conditions. In addition, stress-responsive genes in the GmCAMTA2-OX and GmCAMTA8-OX plants were down-regulated under drought stress conditions. Our results suggest that GmCAMTA2 and GmCAMTA8 genes are regulated by circadian rhythms and function as negative regulators in development and drought stress responses.

Although many policosanols from different sources, such as sugar cane, rice bran, and insects, have been marketed worldwide, there has been no comparative study of the in vivo efficacy using a hyperlipidemic animal model. This study compared the efficacy of treating dyslipidemia with four different policosanols, including one sugar cane wax alcohol from Cuba (Raydel®) and three policosanols from China (Xi’an Natural sugar cane, Xi’an Realin sugar cane, and Shaanxi rice bran) in hyperlipidemic zebrafish. After 12 weeks of consumption of each policosanol (final 0.1% in diet, wt/wt) and high cholesterol diet (HCD, final 4%, wt/wt) in a tetrabit, the Raydel policosanol group and Xi’an Natural policosanol group showed the highest survivability of approximately 81%, whereas the Xi’an Realin policosanol group and Shaanxi policosanol group showed 57% and 67% survivability, respectively. Among five HCD groups, the Raydel policosanol group showed the lowest serum total cholesterol (TC, p<0.001 versus HCD control) and triglyceride (TG, p<0.001 versus HCD control) with the highest percentage of high-density lipoproteins (HDL)-C in TC. The Raydel policosanol group also showed the lowest serum aspartate aminotransferase (AST) and alanine aminotransferase (ALT) levels with the least infiltration of inflammatory cells and interleukin-6 production in hepatocytes. In the ovary, the Raydel policosanol group also showed the highest contents of mature vitellogenic oocytes with the lowest production of reactive oxygen species and cellular apoptosis in ovarian cells. In the testis, the Raydel policosanol group also showed the healthiest morphology for spermatogenesis with the least interstitial area and reactive oxygen species (ROS) production in testicular cells. In conclusion, 12 weeks of Raydel policosanol consumption resulted in remarkable improvement of the blood lipid profile, amelioration of inflammation in the liver, and enhancement of the cell morphology in the ovary and testis with the highest survivability under the HCD.

Our previous study demonstrated that mesenchymal stem/stromal cells (MSCs) induced the differentiation of myeloid-derived suppressor cells (MDSCs) in the bone marrow (BM) under inflammatory conditions. In the present study, we aimed to explore the signaling pathway in BM cells responsible for MDSC generation. RNA-seq revealed that the mitogen-activated protein kinase (MAPK) pathways, among biochemical pathways, exhibited the highest number of differentially expressed genes in BM cells with MSC coculture relative to those without. Western blot confirmed strong phosphorylation of c-Jun N-terminal kinase (JNK) in BM cells cocultured with MSCs under GM-CSF stimulation, whereas p38 kinase activation remained unaltered by MSCs. Inhibition of JNK by SP600125 significantly abolished the expression of Arg1 and Nos2, the hallmark genes of MDSCs, as well as Hif1α, a molecule mediating monocyte functional re-programming into suppressive phenotype, in MSC-cocultured BM cells, while increasing TNF-α in response to lipopolysaccharides stimulation. Furthermore, JNK inhibition markedly abrogated the effect of MSCs on the production of TGF-β1, TGF-β2 and IL-10 in BM cells. These results suggest that MSCs induce MDSC differentiation in BM during inflammation, at least in part, through the activation of the JNK MAPK signaling pathway.

The purpose of this study was to identify subgroups of quality of life (QOL) changes in breast cancer survivors (BCS) and to determine factors associated with subgroups of consistently low or deteriorated QOL. We enrolled 101 women recently diagnosed with breast cancer in South Korea and asked them to complete a questionnaire at baseline (within 1 month of diagnosis), 1 year later (Year 1), 2 years later (Year 2), and 3 years later (Year 3). We assessed QOL using the global QOL subscale from the EORTC QLQ-C30. We defined low QOL as a global QOL score 10 points below the mean score of the general population. Based on low QOL as defined in this study, we identified subgroups of QOL changes over 3 years. We identified four subgroups of QOL changes: improved (47.4%), stable (30%), continuously low (8.8%), and deteriorated (13.8%) and considered the last two categories (22.6%) as poor QOL. Logistic regression analyses demonstrated that significant determinants of poor QOL were insomnia at Year 1, fatigue and anxiety at Year 2, and fatigue, depression, and comorbidity at Year 3. In conclusion, persistent symptoms of insomnia, fatigue, anxiety, depression, and comorbidity are potential risk factors for poor QOL in BCS.

Marine vessels operating on the Arctic Sea route are constantly prone to collisions and friction with ice. This study discusses the wear of the hull plate caused by the collision of ice against vessels operating in Arctic Sea routes. The abrasive wear of the hull due to ice impact was numerically assessed based on both the incident behavior of ice particles interacting with the flow around the hull and the wear loss of the hull surface caused by the contact force of ice particles. A multi-phase approach was adopted to account for the behavior of ice particles continuously affected by the fluid force around the hull. The fluid force acting on the ice floe was evaluated using computational fluid dynamics (CFD) and the dynamic motion of the drift ice was evaluated using the discrete element method (DEM). The motion of the floating ice particles was updated in real time by iteratively coupling the fluid force and the motion of the ice floe at each time step of the numerical simulation. The results of the wear simulation models were presented in terms of the shape change of the hull surface due to wear. At first, the wear was evaluated for cases in which only the surface paint of the hull was damaged. Thereafter, a computation model considering the shape change of the hull surface experiencing long-term friction of ice particles was introduced. Finally, the numerical procedures to predict the abrasive wear of the hull surface by ice impact were discussed.

The etiological agent of various viral diseases has been identified, and clinical characteristics and complications of each disease are well known. In general, a viral disease appears as acute systemic inflammatory disease, but after acute infection, some patients remain asymptomatic carriers or suffer chronic viral diseases, suggesting that the phenomena are unavoidable processes for viruses’ coexistence with their hosts as virome in microbiota of human species. Although each viral disease has been described as having different pathophysiology, the host's control systems, including immune systems, against the insults from any viral infections, have the same components in previously healthy hosts. Therefore, considering the characteristics of the life cycle of viruses being dependent on the host cell and the same immune components of the host, it is reasonable assumption that there is a common immune mechanism to respond to the insults from all viral diseases. The authors discuss on the characteristics of virus infection and unresolved issues in viral diseases and propose a rationale of early immune modulators for acute insults from viral diseases based on our clinical experiences and the protein-homeostasis-system hypothesis.

The study is to identify motivational factors that lead to collective intelligence and to understand how these factors relate to each other and to innovation capabilities in enterprises. The relationships between each of the sub-factors of the collective intelligence construct with the sub-factor of incremental innovation were examined. The study used the convenience sampling of corporate employees who use collective intelligence from corporate panel members (n=1500). Collective intelligence was found to affect work process, operations, and service innovation. This suggests that as work processes are made more innovative, the more actively collective intelligence is pursued, the greater the improvement in the performance of work processes, work procedures, work efficiency, customer satisfaction, and services. This study provides significant implications for corporations operating collective intelligence services such as online communities. First, such corporations vitalize their services by raising the quality of information and knowledge shared in their communities. Additionally, contribution motivations that take the characteristics of knowledge and information contributors into consideration require further development.The sample for this study was identified through convenience sampling of corporate employees who use collective intelligence from corporate panel members (n=1500). Collective intelligence was found to affect work process, operations, and service innovation. This suggests that as work processes are made more innovative, the more actively collective intelligence is pursued, the greater the improvement in the performance of work processes, work procedures, work efficiency, customer satisfaction, and services. This study provides significant implications for corporations operating collective intelligence services such as online communities. First, such corporations vitalize their services by raising the quality of information and knowledge shared in their communities. Additionally, contribution motivations that take the characteristics of knowledge and information contributors into consideration require further development.

The high demand for liquefied natural gas (LNG) requires more LNG carriers (LNGCs) to be in operation. During transportation, there is a high risk due to the required extremely low temperatures and the explosive nature of LNG cargo. Moreover, when there is a lack of experience in operating old LNGCs, there is a serious concern regarding operational accidents. A systematic maintenance strategy, especially for LNG cargo containment systems, is crucial for maintaining safe LNG transportation at sea. The purpose of this study is to develop preventive LNG cargo containment system maintenance models by using LNGC dock specifications from LNGCs of various ages. The dock specifications from a conventional LNGC repairing dock were analyzed using natural language processing techniques in order to develop preventive maintenance models of the LNG cargo containment system. From these results, and by considering the ship’s age, it was found that for young LNGCs the priority for repair should focus on checking routine consumable spare parts by tank inspections, whereas for older LNGCs the focus should be on tank condition maintenance rather than on other facilities. These results are expected to be useful in the development of a maintenance strategy of preventive LNG cargo containment systems in maritime LNG transportation.

Considering the isotropic release process of nanoelectromechanical systems (NEMS), defining the active region of NEM memory switches is one of the most challenging process technologies for the implementation of monolithic-three-dimensional (M3D) CMOS-NEM hybrid circuits. In this paper, we propose a novel encapsulation method of NEM memory switches. It uses alumina (Al2O3) passivation layers which are fully compatible with CMOS baseline process. The Al2O3 bottom passivation layer can protect intermetal dielectric (IMD) and metal interconnection layers from vapor hydrogen fluoride (HF) etch process. Thus, the controllable formation of the cavity for the mechanical movement of NEM memory switches can be achieved without causing any damage to CMOS baseline circuits as well as metal interconnection lines. As a result, NEM memory switches can be located in any places and metal layers of an M3D CMOS-NEM hybrid chip, which makes circuit design easier and more volume-efficient. The feasibility of our proposed method is verified based on experimental results.

Radiator reliability is crucial in environments characterized by high temperatures and friction, where prompt interventions are often required to prevent system failures. This study introduces a proactive approach to radiator fault diagnosis, leveraging the integration of Gaussian Mixture Model (GMM) and Long-Short Term Memory (LSTM) autoencoders. Vibration signals from radiators were systematically collected through randomized durability vibration bench tests, resulting in four operating states—two normal, one unknown, and one faulty. Time-domain statistical features of these signals were extracted and subjected to Principal Component Analysis (PCA) to facilitate efficient data interpretation. Subsequently, this study discusses the comparative effectiveness of GMM and LSTM in fault detection. GMMs are deployed for initial fault classification, leveraging their clustering capabilities, while LSTM autoencoders excel in capturing time-dependent sequences, facilitating advanced anomaly detection for previously unencountered faults. This alignment offers a potent and adaptable solution for radiator fault diagnosis, particularly in challenging high-temperature or high-friction environments. Consequently, the proposed methodology not only provides a robust framework for early-stage fault diagnosis but also effectively balances diagnostic capabilities during operation. Additionally, this study presents the foundation for advancing reliability life assessment in accelerated life testing, achieved through dynamic threshold adjustments using both the absolute log-likelihood distribution of the GMM and the reconstruction error distribution of the LSTM autoencoder model.

Potential breeding habitat of egrets and herons was evaluated using the Maximum Entropy Model (MaxEnt). Model output can help guide management of nuisance egret and heron rookeries in urban forests of Daejeon Metropolitan City, Korea. This study examined 126 locations regarded as breeding sites of egrets and herons at the nationwide census conducted by the National Institute of Environmental Research between 2011 and 2012. In addition, 252 randomly selected locations were used to identify the significant variables among a total of 15 environmental variables within 4 factors (topography, natural environment, distance and climate). Twelve variables were significantly different between the breeding and randomly selected points. The final 10 variables were selected through Pearson’s correlation analysis. Using MaxEnt, breeding area was estimated using the 10 selected variables in Daejeon. The area under the receiver operating characteristic curve (AUC) was 0.950, which was the average value through 10-fold cross-validation to estimate the model reliability. The potential breeding habitat for egrets and herons was estimated to be 106.69 km2 (19.76% of the total area) in Daejeon. Within the estimated potential habitat, 11.82 km2 (12.46%) were less than 50 m from the residential district while 79.85 km2 (88.92%) were more than 50m from the residential district. Discriminative management strategies considering the breeding location of egrets and herons should be applied not only to minimize conflicts with residents, but also to maintain stable egret and heron breeding sites in Daejeon, Korea.

The narrow process window during intercritical annealing and discontinuous yielding have limited the commercialisation of medium Mn steels. In this study, a double annealing process based on the commercial continuous annealing line is proposed. The cold-rolled medium Mn steels were first fully austenitized and quenched during the first annealing, followed by the intercritical annealing for reverted austenite transformation. The microstructure of duplex lath-shaped austenite and ferrite is produced and the steel exhibit a desirable continuous yielding during tensile deformation. Al is added into the medium Mn steel to enlarge the process window and to improve partitioning efficiency of Mn. The produced steel is more robust with temperature fluctuation during the industrial process due to the enlarged intercritical region. Mn partitioning is more efficient owing to elevated annealing temperature, which results in the improvement of ductility in the Al-added steel with increased austenite stability.

A programmable DC power supply with Real-time Digital Simulator (RTDS)-based photovoltaic (PV) Power Hardware-In-the-Loop (PHIL) simulators have been used to improve the control algorithm and reliability of PV Inverter. This paper proposes a supervisory control algorithm for PV PHIL simulator with non-RTDS device that is an alternative solution of high cost PHIL simulator. However, when such a simulator with conventional algorithm which is used in RTDS is connected to a PV inverter, the output is in the transient state and it makes it impossible to evaluate the performance of the PV Inverter. Therefore proposed algorithm controls the voltage and current target values according to the constant voltage (CV) and constant current (CC) modes to overcome the limitation of the Computing Unit, DC power supply and also uses a multi-rate system to account for the characteristics of each component of simulator. A mathematical models of a PV system, programmable DC power supply, isolated DC measurement device and Computing Unit are integrated to form a real-time processing simulator. Performance tests using a PV PHIL simulator which is applied proposed algorithm connected a PV inverter are carried out and proved superiority and utility of this method against conventional methods.

Smartphone-based point-of-care testing (POCT) is rapidly emerging as an alternative to traditional screening and laboratory testing, particularly in resource-limited settings. In this proof-of-concept study, we present a smartphone- and cloud-based artificial intelligence quantitative analysis system (SCAISY) for relative quantification of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2)-specific IgG antibody lateral flow assays that enables rapid and accurate evaluation of test strips. By capturing an image with a smartphone camera, SCAISY quantitatively analyzes antibody levels and provides results to the user. We analyzed changes in antibody levels over time in over 248 individuals, including vaccine type, number of doses, and infection status, with a standard deviation of less than 10%. We also tracked antibody levels in six participants before and after SARS-CoV-2 infection. Finally, we examined the effects of lighting conditions, camera angle, and smartphone type to ensure consistency and reproducibility. This study suggests that SCAISY is a simple and powerful tool for real-time public health surveillance, enabling the acceleration of quantifying SARS-CoV-2-specific antibodies generated by either vaccination or infection and tracking of personal immunity levels.

Very poor oral health, common among older adults, is associated with cognitive decline.This study aimed to investigate the association between denture use, chewing ability, and cognitive function in Korean middle-aged adults using samples representing middle-aged people at the national level. This longitudinal study included 9,998 middle-aged adults via Korea Longitudinal Study of Aging 7th special survey data. Denture use, chewing ability, health-related factors, and general characteristics were assessed by the Computer Assisted Personal Interview. After controlling general characteristics using a generalized estimating equation model, the association of denture use and MMSE scores with chewing ability of those with or without dentures and MMSE scores were analysed. Twenty-four percent of participants wore dentures among them, 35.1% complained of difficulty chewing when wearing dentures. Among participants who did not wear dentures, 16.4% complained of difficulty chewing. MMSE scores were lower among denture-wearers than non-denture wearers (β = -0.026, p < 0.001). In both groups, MMSE scores decreased with chewing difficulty and were significantly reduced among non-denture wearers (p < 0.05). Chewing ability was closely associated with cognitive function. Given the negative effect of difficulty chewing on cognitive function, maintaining chewing ability should be of great concern.

This study aims to investigate the changes in the structural relationship between alienation in physical education (PE) class, school happiness, and future healthy life expectancy in Korean adolescents after the COVID-19 pandemic. The data were collected from adolescents in the Republic of Korea using scales for these factors. The collected data were analyzed with frequency analysis, reliability analysis, validity analysis, independent t-test, and path analysis. The key results were as follows. First, there were partial changes in each of the parameters since the outbreak of COVID-19. Second, before the pandemic, alienation in PE class negatively affected school happiness, and school happiness positively affected future healthy life expectancy; however, alienation in PE class did not affect future healthy life expectancy showing a complete mediating effect. Third, during the pandemic, alienation in PE class negatively affected school happiness, and school happiness positively affected future healthy life expectancy; alienation in PE class negatively affected future healthy life expectancy, showing a partial mediating effect. These findings emphasize the importance and potential of school education, especially PE, in promoting happiness and healthy life in adolescents. We expect these findings to have practical implications for future research by presenting theoretical and empirical data.

Effective oral care is important to maintain a high quality of life. Therefore, plaque control can prevent the development and recurrence of periodontitis. Brushing with a toothbrush and toothpaste is a common way to remove plaque; however, excessive brushing or brushing with abrasive toothpaste can cause wear and tear on the dental crown. Hence, we aimed to quantitatively compare the plaque-removal efficiency and tooth wear of toothbrushes using bioelectric effect (BE) with those of mechanical electric toothbrushes. To generate the BE signal, an electronic circuit was developed and embedded in a toothbrush. Further, typodonts were coated with cultured artificial plaques and placed in a brushing simulator. A toothpaste slurry was applied, and the typodonts were eluted with tap water after brushing. The plaques of the typodonts were captured, and the images were quantified. For the tooth wear experiment, polymethyl methacrylate disk resin blocks were brushed twice a day, and the thickness of the samples was measured. Subsequently, statistical differences between the experimental toothbrushes and typical toothbrushes were analyzed. The BE toothbrush had a higher plaque-removal efficiency and could minimize tooth wear. This study suggests that the application of BE may be a new solution for oral care.