There are many species of endemic plants from Mexico, without food or commercial use, but with different applications in traditional medicine and valuable for their content of secondary metabolites. In this sense, we found two species of Cucurbitacea family plants natives of southeast and gulf of México, with traditionally use how soap and laundry agent, control of some pests, and it has also been used how infusion for the treatment of different types of dermatitis and stomachache. In the present work, we evaluate the antiproliferative activity in vitro, of six crude organic extracts, tested against six human tumor cell lines, A549 (lung), HBL-100 (breast), HeLa (cervix), SW1573 (lung), T-47D (breast) and WiDr (colon), the results indicated that at least three extracts from both species presents an interesting antiproliferative activity on five tumor cell lines.

This article presents a unique set of voltage and current data from a public building and acquired using a hybrid measurement solution that combines Python and Grafana. The transversal purpose consists of contributing to the community with a vision of the quality of the supply more oriented to the monitoring of the state of the network, providing a more realistic vision, which allows a better understanding, and the adoption of the best decisions to achieve the efficient energy management and thus optimize the operation and maintenance of power systems. The work focuses on higher order statistical estimators that, combined with exploratory data analysis techniques, improve the characterization of the shape of the stress signal. These techniques and data, together with the acquisition and monitoring system, present a unique combination in the line of low-cost measurement solutions. It also incorporates the underlying benefit of the contribution to industrial benchmarking. The paper also includes a computational comparison between Python and LabVIEW to elicit the performance of the measurement solution.

One of the challenges posed by renewable energies is the stabilization of parameters related to the quality of electrical energy. This study demonstrates the existence of a relationship between input blocks of hydropower and the variation of the fundamental frequency of the electricity grid. By mapping production data provided by Spanish Electric Network with frequency measured in the laboratory, it is shown that gradients of hydropower are correlated with frequency fluctuations for certain characteristic times. Considering hourly instances of energy input, the study compares two methods for calculating hydropower gradients (linear regression and pseudo-linear regression); and two methods for calculating local frequency extremes (the "specular inertia" method and analysis by comparison with the moving average), in order to corroborate the results.

This article proposes a measurement solution designed to monitor instantaneous frequency in power systems. It uses a data acquisition module and a GPS receiver for time stamping. A program in Python takes care of receiving the data, calculating the frequency, and finally transferring the measurement results to a database. The frequency is calculated with two different methods, which are compared in the article. The stored data is visualized using the Grafana platform, thus demonstrating its potential for comparing scientific data. The system as a whole constitutes an efficient low cost solution as a data acquisition system.

Today, enterococci (mainly Enterococcus faecalis) are one of the main causes of infective endocarditis in the world, generally affecting an elderly and fragile population, with a high mortality rate. enterococci are intrinsically resistant to many commonly used antimicrobial agents. All enterococci exhibit decreased susceptibility to penicillin and ampicillin, as well as high-level resistance to most cephalosporins and all semi-synthetic penicillins, as the result of expression of low-affinity penicillin-binding proteins, that precludes an unacceptable number of therapeutic failures with monotherapy with these drugs. For years, the synergistic combination of penicillins and aminoglycosides was the cornerstone of treatment, but the emergence of strains with high resistance to aminoglycosides led to the search for new alternatives, such as dual beta-lactam therapy. The development of multi-drug resistant strains of Enterococcus faecium is a matter of considerable concern due to its probable spread to E. faecalis and have forced the search of new alternatives with the combination of daptomycin, fosfomycin or tigecycline. Some of them have scarce clinical experience and others are still under investigation and will be analyzed in this review. In addition, the need for prolonged treatment (6-8 weeks) to avoid relapses has led to the consideration of viable options such as outpatient parenteral therapies or long-acting administrations with the new lipoglycopeptides (dalbavancin or oritavancin), and sequential oral treatments, which will also be discussed.

Health information and communication are key elements that allow patients and family members to make decisions about end-of-life process and guarantee a death with dignity. Objective: To understand carers’ experiences regarding health information and communication during the illness and death of family members. Methods: This qualitative study was conducted in Andalusia based on the paradigm of hermeneutic phenomenology. Participants were carers who had accompanied a family member at the end of life for over 2 months and less than 2 years. Five nominal groups and 5 discussion groups were established, and 41 in-depth interviews with 123 participants were conducted. Atlas.ti 7.0 software was used to analyse the discourses. Results: Four dimensions of the dying process emerged: differences in carers’ perceptions of information and communication, a conspiracy of silence, consequences of the absence or presence of information, and the need for a culture change. Conclusions: Poor management of health information and communication at the end of life suffering and discomfort patients and their families. The culture of denying and avoiding death is still present today. A change in education about death would better enable health professionals to care for patients at the end of life.

Copper-nitride (Cu3N) material is attracting much attention as a potential next-generation thin-film solar-light absorber. In this work, polycrystalline Cu3N thin films were prepared using reactive-RF-magnetron sputtering, at room temperature,onto glass and silicon substrates. The optical properties of the Cu3N thin layers were studied by spectroscopic ellipsometry and transmission, to achieve a low-cost absorber material to replace conventional silicon. The reactive-RF-sputtered Cu3N films were also investigated by FIB-SEM microscopy and FTIR spectroscopy.

The evolution of photovoltaic cells is intrinsically linked to advancements in the materials from which they are fabricated. This review paper provides an in-depth analysis of the latest developments in silicon-based, organic, and perovskite solar cells, which are at the forefront of photovoltaic research. We scrutinize the unique characteristics, advantages, and limitations of each material class, emphasizing their contributions to efficiency, stability, and commercial viability. Silicon-based cells are explored for their enduring relevance and recent innovations in crystalline structures. Organic photovoltaic cells are examined for their flexibility and potential for low-cost production, while perovskites are highlighted for their remarkable efficiency gains and ease of fabrication. The paper also addresses the challenges of material stability, scalability, and environmental impact, offering a balanced perspective on the current state and future potential of these material technologies.

For development and successful application of any material, a clear understanding of their mechanical behavior is one of the most important things, but when it comes to nanofibers networks it become a challenge due to, their high porosity, many scales in their structure, and characteristics non-linear. Therefore, an experimental methodology in conjunction with a theoretical model that can fully consider their characteristics is still needed. In this work we proposed a model that incorporates the propagation of the elastic waves in two-phase media to determine the effective elastic modulus of electrospun membranes of PLA/gelatin given the mechanical properties of nanofibers, shape, distribution and concentration. The model was verified via laser ultrasonic testing. It was found that the values predicted for the effective modulus by the model were higher than the values obtained from experimental results. One explanation is due to the experimental density. As a result, the P-Wave velocity from the model best fit to experimental results and it has the same behavior, decrees as the concentration of gelatin in the solution. These results indicate the model and experimental methodology can assist in the dressing of nanofibers networks and electrospun materials.

Background: Endometriosis affects between 1% to 10% of women worldwide; it is associated with a significant burden on the woman, her relationships, productivity, mental health, family and society. Aim:To contribute to the current understanding of the impact of endometriosis on women’s lives by integrating qualitative research findings to explore the illness experiences of women living with endometriosis. Study design:Synthesis of qualitative data using Britten’s meta-ethnography.Methods:Six bibliographic databases (Medline, Embase, CINAHL, Web of Science, Scopus and PsycINFO) and Google Scholar were searched for peer-reviewed papers published in English language from inception of until August 6th 2021. Results: Fifteen studies were included in the data synthesis. The review included a total of 354 women from fourteen countries (including South Africa, Iran, England, Australia and United States of America), of age range 16-78 years. Subjects represented diverse ethnicities, cultures and native languages distributed across socioeconomic classes. Representation of all stages of endometriosis was included.Findings incorporate the following nine categories into a conceptual model: disease symptoms; health services experience; isolation and limited social participation; limited physical functioning; a coterie of emotions; sex and intimate relationships; infertility; work life and education; coping strategies and support. Diagnostic delays, persistent symptoms, healthcare costs and inadequate education to patients about the disease; all intersect into a web of struggles and incoherence for patients. Conclusion:Women with endometriosis living in various countries report similar illness experiences; although gender roles, culture and socio-economic status may act as mediating factors that shape an individual’s illness experience.

We give three new authentication schemes without secrecy. The first two on finite fields and Galois rings, using Gray map for this link. The third construction is given on Galois rings. The main achievement in this work is to obtain optimal impersonation and substitution probabilities in the schemes. Additionally, in the first and second scheme, we simplify the source space and bring a better relationship between the size of the message space and the key space than the given in [8]. Finally, we provide a third scheme on Galois rings, which generalizes the scheme over finite fields constructed in [9].

Objective: To evaluate the physical and chemical stability of the antibiotic temocillin at the recommended dose for severe infections and contained in infusion bags or elastomeric devices at different temperatures for its use in Outpatient Parenteral Antimicrobial Therapy (OPAT) programs.Method: Solutions of temocillin 12 g/L diluted in 0.9% sodium chloride were stored at 4ºC ± 2ºC, 25°C ± 2°C, 32°C ± 2°C and 37°C ± 2°C for 72 h both in polypropylene infusion bags and in polyisoprene elastomeric pumps. Physical and chemical stability were evaluated at 12, 24, 30 48 and 72 h after manufacturing. The solutions were considered stable if color, clearness and pH remained unchanged and if the percentage of intact drug was ≥90%. Results: There were no observed changes in color or clarity in any of the refrigerated (4°C) samples or in the samples incubated at 25ºC and 32ºC. At 37ºC, an increase in intensity of yellow color was observed at 30, 48 and 72 h in both infusion bags and elastomeric pumps samples. All samples remained within the pH range 6.84–6.06. At 4ºC, 25ºC and 32°C ± 2°C, temocillin attained the stability criteria of ≥90% of the original concentration for the whole experiment in both devices. At 37ºC, temocillin was stable for 24 h but its concentration dropped below 90% from that time point both in the infusion bags and in the elastomeric pumps.Conclusions: According to the data provided in this stability study, temocillin administrated by continuous infusion would be an appropriate candidate for the treatment of patients that can be discharge to complete therapy in an OPAT program.

Background: The effectiveness of the anti-COVID-19 vaccine remains a matter to be clarified. Methods: The humoral and cellular immunity after the administration of three doses of the Pfizer–BioNTech and Oxford AstraZeneca vaccines against SARS-CoV-2 over one year and the appearance of post-vaccination COVID-19 have been studied. Results: Anti-SARS-CoV-2 IgG and IgA antibodies showed a progressive increase throughout the vaccination period. This increase was greatest after the third dose. The highest levels were observed in subjects who had anti-SARS-CoV-2 antibodies prior to vaccination. There was an increase in CD4+ αβ, CD8+ γδ and TEM CD8+ γδ T cells, and a decrease in apoptosis in CD4+CD8+ and CD56+ αβ and γδ T cells. Post-vaccination SARS-CoV-2 infection was greater than 60%. The symptoms of COVID-19 were very mild and were related to γδ T cell deficit, specifically CD8+ TEMRA and CD56+ γδ TEM, as well as lower pre-vaccine apoptosis levels. Conclusions: Those results demonstrate the important role that γδ T cells play in SARS-CoV-2 vaccine immunization.

The primary goal of this review is to provide a comprehensive overview of the state-of-the-art in solid-state batteries (SSBs), with a focus on recent advancements in solid electrolytes and anodes. The paper begins with a background on the evolution from liquid electrolyte lithium-ion batteries to advanced SSBs, highlighting their enhanced safety and energy density. It addresses the increasing demand for efficient, safe energy storage in applications like electric vehicles and portable electronics. A major part of the paper analyzes solid electrolytes, key to SSB technology. It classifies solid electrolytes as polymer-based, oxide-based, and sulfide-based, discussing their distinct properties and application suitability. The review also covers advancements in anode materials for SSBs, exploring materials like lithium metal, silicon, and intermetallic compounds, focusing on their capacity, durability, and compatibility with solid electrolytes. It addresses challenges in integrating these anode materials, like interface stability and lithium dendrite growth. This review includes a discussion on the latest analytical techniques, experimental studies, and computational models to understand and improve the anode-solid electrolyte interface. These are crucial for tackling interfacial resistance and ensuring SSBs' long-term stability and efficiency. Concluding, the paper suggests future research and development directions, highlighting SSBs' potential in revolutionizing energy storage technologies. This review serves as a vital resource for academics, researchers, and industry professionals in advanced battery technology development. It offers a detailed overview of materials and technologies shaping SSBs' future, providing insights into current challenges and potential solutions in this rapidly evolving field.

As the global community shifts away from fossil fuels towards more environmentally friendly energy alternatives, there is an escalating demand for sophisticated energy storage solutions. Solid-State Batteries (SSBs) have emerged as a promising advancement, presenting a superior substitute to conventional lithium-ion batteries. This review provides an in-depth examination of SSBs, emphasizing their enhanced energy density, safety, and longevity. We evaluate conventional cathode materials, including lithium cobalt oxide (LiCoO2), lithium manganese oxide (LiMn2O4), and lithium iron phosphate (LiFePO4). Additionally, we introduce emerging materials such as sulfides, oxides, and air-based cathodes, discussing their benefits, limitations, and their congruence with solid electrolytes. Special attention is devoted to the structural fine-tuning of cathode ma-terials, investigating approaches like nanostructuring, surface coatings, and composite strategies to counteract issues such as restricted conductivity and structural volatility. The review critically analyzes the electrical and thermal properties of these materials, which are essential for battery safety and efficacy. Moreover, we present a comparative assessment of cathode materials based on performance indicators and identify prevailing research voids and hurdles in the commerciali-zation of SSB cathodes. Concluding, we suggest prospective research directions and innovations, underscoring the revolutionary potential of SSB technologies in paving the way for a sustainable energy horizon.

The diversity and inclusion discussion permeates many sectors of society. Within this dialogue, science and scientists are acutely aware of the value of diversity and the need for inclusion. While demographic diversity in science has received considerable recent attention, very little research and understanding exists on inclusion. Our study presents empirical data on the meaning of inclusion using a crowdsourcing approach that sought responses to the question “What does inclusion mean to you?”. The most prominent concepts were those of empathy, warmth, support, love, acceptance and curiosity; diverse perspectives; and participation. We clustered conceptual elements of inclusion into four themes: access and participation, embracing diverse perspectives, a welcome environment, and team belonging. On the basis of these data, we theorize a conceptual framework model from which inclusion may be put into practice. Our model suggests a dynamic process of inclusion operating from principal structural elements of 1) a foundation that involves place, access and participation, and space; 2) reciprocal engagement as an engine for inclusion; and 3) expression of inclusion as culture. The framework model demonstrates a means by which the practice of diversity can be more than shifts in demographic statistics, and instead promote the full expression of benefits derived when the many dimensions of diversity are truly included.

Copper nitride (Cu3N), a metastable semiconductor material, but with reasonably-high-stability at room temperature, is drawing a great deal of attention as a very promising next-generation, earth-abundant, thin-film solar absorber. Its non-toxicity, on the other hand, makes it a very attractive eco-friendly semiconducting material. In the present work, Cu3N thin films were grown by employing radio-frequency magnetron sputtering, at room temperature, with 50-W RF-power, and partial nitrogen pressures of 8.0 and 1.0, onto glass substrates. Thus, the influence of argon on the optical properties of the Cu3N thin films was studied, with the goal of being able to achieve a low-cost, light absorber material, with appropriate properties in order to substitute the more conventional silicon, in photovoltaic cells. Variable-angle spectroscopic ellipsometry measurements have been conducted at three angles, 50∘, 60∘, and 70∘, respectively, in order to obtain the two ellipsometric parameters psi, ψ, and delta, Δ, respectively. For the constructed optical model, the bulk planar Cu3N layer is described by a one-dimensional graded-index model, combine with the mixture of a Tauc-Lorentz oscillator and up to four Gaussian oscillators, whereas a BEMA model with 50%-air-void is adopted in order to account for the existing surface-roughness layer. In addition, the optical properties such as the energy-band gap, and refractive index and absorption coefficient, were determined in order to assess the actual capability of this material as a light absorber for solar cells. The direct and indirect band gap energies were accurately calculated, and they were found to be in the ranges of 2.14-2.21 eV and very clse to 1.50 eV, respectively.

The North-Marchean Apennines (central Italy) host an extraordinary geological and geomor-phological heritage, significant for its richness, diversity, rarity, scientific interest, aesthetic ap-peal, naturalistic, cultural, and educational values. The area, which covers 600 square kilometres and includes numerous spectacular geosites, embraces 18 municipalities in the provinces of Pesaro-Urbino and Ancona. These municipalities are distributed along the ridge that includes the peaks of Mts. Strega, Catria, Acuto, Petrano, Tenetra and Nerone and covers the parallel ridge of Mts. Paganuccio-Pietralata, together with the spectacular Furlo Gorge. It is a real geological museum outdoors, which, with its continuous stratigraphic succession of 200 million years, its geosites, and a vast system of karstic caves, is distinctive for geologists all over the world. This study aims to analyse the environmental heritage of the North-Marchean Apennines through the integrated study and description of the geo-environmental aspects of 7 geosites, se-lected from a list of 44, presented here and localized. These 7 geosites were chosen as being par-ticularly significant from a scientific, naturalistic as well as aesthetic, and cultural point of view. The richness of its geological and geomorphological heritage and the great wealth of its naturalistic, historical, and cultural aspects make it an area with high educational, tourist and recreational potential.

In mesoscale eddies, chemical properties and biological composition are different from those in surrounding water, due to their unique physical processes. It is unclear how physical-biological coupling occurs in warm-core eddies, particularly since no study has examined the relationship between bacteria and viruses. The purpose of the present study was to examine the influence of anticyclonic warm eddy on the relationship between bacterial and viral abundances as well as viral activity (viral production) in different depths. In the core of warm eddy, bacterial abundance (0.48 to 2.82 ×105 cells mL−1) fluctuated less than that of the outside eddy (1.12 to 7.03×105 cells mL−1). In particular, there was four-folds higher of viral-bacterial abundance ratio (VBR) estimated within the eddy below DCM than the outside eddy. We suggest that prevailing physical forces with downwelling at the center of the anticyclonic warm eddy, viruses can also be transmitted into the deep ocean directly through adsorption on particulate organic matter during sinking. Overall, our findings provide valuable insights into the interaction between bacterial and viral communities and their ecological mechanism within the warm eddy.

Real-time multi-axis distributed tactile sensing is a critical capability if robots are to perform stable gripping and dexterous manipulation, as it provides crucial information about the sensor-object interface. In this paper, we present an optical-based 6-axis tactile sensor designed in a fingertip shape for robotic dexterous manipulation. The distributed sensor can precisely estimate local XYZ force and displacement at ten distinct locations, and provide global XYZ force and torque measurements. Its compact size, comparable to that of a human thumb, and minimal thickness allow seamless integration onto existing robotic fingers, eliminating the need for complex modifications to the gripper. The proposed sensor design uses a simple, low-cost fabrication method. Moreover, the optical transduction approach uses light angle and intensity sensing to infer force and displacement from deformations of individual sensing units that form the overall sensor, providing distributed 6-axis sensing. The local force precision at each sensing unit in the X, Y, and Z axes is 20.89 mN, 19.19 mN, and 43.22 mN, respectively, over an local force range of approximately ±1.5 N in X and Y and 0 to -2 N in Z. The local displacement precision in the X, Y and Z axes is 56.70 μm, 50.18 μm and 13.83 μm, respectively, over a local displacement range of ±2 mm in the XY directions and 0 to -1.5mm in Z (i.e., compression). Additionally, the sensor can measure global torques, Tx, Ty and Tz, with a precision of of 1.90 N-mm, 1.54 N-mm and 1.26 N-mm, respectively. The fabricated design is showcased by integrating it with an OnRobot RG2 gripper and illustrating real-time measurements during in simple demonstration task which generate changing global forces and torques.

Research on alternatives to rectal thermometry in canine and feline patients has focused on equipment and measurement location but not procedure duration. In a cross-over designed clinical scenario, we evaluated the time prior to and after (Pre-TempT and Post-TempT) rectal and axillary thermometry in canine (n = 114) and feline (n = 72) patients. Equipment duration was controlled for to determine a presumptive total time (TTime) associated with each thermometry method. Pre-TempT and TTime was significantly shorter in axillary thermometry trials for both canine and feline pets (P < 0.001). There was no difference in Post-TempT between thermometry methods in canine patients (P = 0.887) however, the Post-TempT was longer in felines after axillary thermometry (P = 0.004). Reductions in Pre-TempT and TTime were not significant in Scottish Fold breed cats and within the feline rectal trials, the TTime of domestic-long hair breeds was significantly longer than domestic-short hair breeds (P = 0.019). No other tested parameter played a significant role in these results. Axillary thermometry was faster than rectal thermometry in both canine and felines pets due primarily to the time associated with animal approach and restraint (Pre-TempT). These results have implications when optimizing clinic workflow, appointment durations and patient handling time.

This review paper presents a comprehensive synthesis of current knowledge on the contamination of water systems by polycyclic aromatic hydrocarbons (PAHs). PAHs, organic contaminants characterized by two or more fused aromatic rings, are notably problematic due to their persistence, bioaccumulation, and significant health risks. The review commences with an examination of various sources of PAHs in aquatic environments, encompassing both anthropogenic activities, such as industrial discharges, urban runoff, and oil spills, and natural phenomena including volcanic eruptions and wildfires. Subsequently, the discussion shifts to the distribution patterns of PAHs within different aquatic ecosystems, with an analysis of factors that influence their transport. Considerable focus is placed on the entry mechanisms of PAHs into water systems and their interactions with diverse environmental matrices. Additionally, the ecotoxicological effects of PAHs on aquatic life are scrutinized, with particular emphasis on molecular, individual, and ecosystemic impacts. This includes an exploration of PAH bioaccumulation in aquatic organisms and their potential mutagenic and carcinogenic consequences. The review further addresses the challenges associated with detecting and quantifying PAHs in aquatic settings, reflecting on the advancements in analytical methodologies and the complexities introduced by their varied physicochemical properties. The paper concludes with a summary of existing regulatory frameworks and guidelines governing PAH contamination in water systems, underscoring the imperative for global collaboration in the monitoring and management of PAH pollution.

Electrochemical Impedance Spectroscopy techniques were applied in this work to 9 lead-acid battery prototypes fabricated industrially, divided on three type/technology packages. Frequency dependent impedance changes were interpreted during successive charge/discharge cycles on two distinct stages: 1) immediately after fabrication; and 2) after a controlled aging procedure to 50% Depth of Discharge, following industrial standards. By investigating their State of Health behaviour vs electrical response, three methods were employed, namely the (Q-Q0) total charge analysis, the decay values of Constant Phase Element in the equivalent Randles circuits, and the resonance frequency of the circuit. A direct correlation has been found for prediction of the best performant batteries in each package, thus allowing a qualitative analysis capable to provide the decay of the battery State of Health. We emphasized which parameters are directly connected with their lifetime performance in both stages, and by consequence, which type/technology battery prototype emphasize the best performance. Based on this methodology, the industrial producers can further establish the quality of the novel batteries in terms of performance vs lifespan, allowing them to validate the novel technological innovations implemented in the current prototypes.

This study investigated whether reciprocal collaborative pedagogy significantly impacts Indonesian electrical engineering polytechnic students in reducing reading anxiety and improving self-efficacy in ESP reading comprehension skills. Fifty Polytechnic students were equally assigned to two groups. Control groups learned in the traditional reciprocal teaching method individually. Experimental group engaged in reciprocal collaborative pedagogy. Each group received a 6-week reading strategy training. E-learning platforms were used in this study as a complementary tool to distribute ESP reading materials, announcements, and the experiment details being taught. The quantitative and qualitative results demonstrated that the tasks in reciprocal collaborative pedagogy positively affects Indonesian electrical engineering polytechnic students' learning experience and outcomes. This pedagogy promotes a productive learning environment through peer interaction, active engagement, and peer group discussions of the whole learning activities, reducing feelings of anxiety and building confidence in ESP-specialized text.

We argue that several potentials proposed recently for the analysis of the vibrational-rotational spectra of diatomic molecules and their thermodynamic properties exhibit a flaw. One can easily show that the parameters $D_e $ and $r_e$ in those potentials are not the dissociation energy and equilibrium bond length, respectively, as the proposers believe. We show how to overcome the mistake in a simple and quite general way.

The ancient Duchy of Urbino (Marche and Emilia-Romagna Regions, Italy) is known for its spectacular landscapes linked to a unique geological history. This area owns an unexpected cultural resource, which concerns using its landscapes in art. Some great Renaissance artists, including Piero della Francesca, Raphael, and Leonardo, were so impressed by the landscapes that they reproduced them in their most famous paintings. This paper summarizes research concerned with their identification, employing a multidisciplinary method that has enabled the recognition of many morphologies. This contribution provides the scientific community with information on the methodology and regional and national projects developed in this area to enhance its cultural landscapes. Starting from the geological description of the territory, the research focuses on famous works by three great Renaissance artists, providing evidence and morphological details related to the recognition of places: “Nativity” by Piero della Francesca, “Madonna Litta” by Leonardo da Vinci and “Knight’s Dream” by Raphael. Finally, it is proposed to make these landscapes a timeless resource through their inclusion in UNESCO’s cultural heritage. This contribution is addressed to representatives of the administration, conservation, and enhancement of artistic and landscape heritage to stimulate new perspectives for research, education, and tourism within the cultural heritage of this area.

Supramolecular structures are of great interest due to their applicability in various scientific and industrial fields. These fields of scientific action include promising applications i biomedical areas, in sensing, and in conductive and electrical phases. The sensible definition of supramolecular molecules is being set by investigators, who, because of the different sensitivities of their methods and observational timescales, may have different views as to what constitute these supramolecular structures. Besides, diverse polymers can be found to offer unique avenues for multifunctional systems with properties in medicine industrial applications. Aspects of this review provide different conceptual strategies to address molecular design, properties, and potential applications of self-assembly materials and the use of metal coordination as a feasible and useful strategy for constructing complex supramolecular structures. In this order of appreciations and ideas order, it is that this review report involves classic topics such as hydrogels that range from their relationship with drug delivery systems, to metallo-supramolecular materials, through applications in ophthalmic systems, in applications that require adhesiveness and electrically conductive hydrogels. This review also addresses systems that are largely based on hydrogel chemistry and the enormous opportunities to design very specific structures for applications that demand enormous specificity.

Six bacterial strains with differing abilities to produce varying concentrations of Indole Acetic Acid were tested individually and in consortia for plant growth promoting and fitness related traits of Cicer arietinum. In all experiments the presence of the nitrogen fixer Mesorhizobium ciceri resulted in increased biomass production. In the absence of this strain, IAA Psedomonas putida and Bacillus megaterium hinder plant growth and fitness related traits. The application of mixes of the three strains always resulted in better plant performance when M. ciceri was present. Whereas P. putida has a noticeable plant growth-promoting effect B. megaterium resulted less effective. The low levels of IAA produced by the selected strains had a significantly greater positive effect on plant biomass accumulation, flower, pods and seed production as well as on total plant nitrogen and nitrogen concentration in seed than high IAA producer strains.

(1) Background: There are links between tension-type headache and/or migraine with dysfunctions of the cervical and masticatory muscles and with psychosocial factors. The study aims to highlight the connections between primary headaches, bruxism and psychosocial issues, the effectiveness of a multidisciplinary approach in decreasing the intensity and frequency of the headache episodes and bruxism. (2) Methods: 67 patients with primary headache and bruxism were divided into two equal groups. The subjects attended manual therapy sessions twice a week and a weekly counselling session for three months. (3) Results: an overall comparison before and after three months show a significant decrease of the qualitative variables (tension-type headache, migraine, awake bruxism, limited jaw opening, anxiety and stress) after 3 months. Comparing the efficiency of the procedures after 3 months between the two groups, awake bruxism and perceived stress are significantly different. (4) Conclusions: Although the differences are not radical when comparing MT with MT+C at three months, the patients who received either manual therapy or this treatment combination showed an improvement in pain relief, in the frequency and complexity of their symptoms, a reduction in functional disability and an overall improvement of the quality of their lives after three months of treatment.

As air traffic demand grows, robust, data-driven anomaly detection methods are required to ensure that aviation systems become safer and more efficient. The terminal airspace is identified as the most critical airspace for both individual flight-level and system-level safety and efficiency. As such, developing data-driven anomaly detection methods to analyze terminal airspace operations is paramount. With the expansion of ADS-B technology, open-source flight tracking data has become more readily available to enable larger-scale analyses of aircraft operations. This paper makes a distinction between spatial metrics in ADS-B trajectory data and energy metrics derived from ADS-B trajectory data. Motivated by the limited number of approaches that simultaneously consider both spatial and energy metrics, this paper introduces the concepts of spatial anomalies and energy anomalies. In particular, it proposes a novel, unified framework for detection of spatial and energy anomalies in ADS-B trajectory data (and associated derived metrics). The framework consists of three main parts - a data processing procedure, a spatial anomaly detection method, and an energy anomaly detection method. The framework is demonstrated utilizing four months of ADS-B trajectory data associated with arrivals at San Francisco International Airport, and the relationship between the spatial and energy anomalies in this terminal airspace is explored. The results that stem from the implementation of this framework indicate that if an aircraft is spatially not conforming to an identified set of air traffic flows representing standard spatial operations, then this aircraft is more likely to experience non-conformance to standard operations in its energy metrics. Aviation operators, such as air traffic controllers, may benefit from this observation, as it may factor into decision-making in instances where there is the potential to instruct an aircraft to spatially deviate from standard operations. Additionally, this research revealed underlying differences between trajectories that are spatially nominal yet energy-anomalous and those trajectories that are spatially anomalous and energy-anomalous. Focusing solely on energy anomaly detection does not provide insight into potential spatial-related decisions that may have been made to result in off-nominal energy behavior.

Poikilodermatous plaque-like hemangioma (PPH) is a recently described clinical and pathological entity, with only 18 cases reported in the literature. Although uncommon, this benign condition presents consistent clinical and histological findings. We present a new case of PPH in an 81-year-old male and review the existing literature. The persistence over time and the need to distinguish PPH from more significant lesions underscore the importance of its clinical and pathological recognition.

The enhanced multi-objective symbolic discretization for time series (eMODiTS) method employs a flexible discretization scheme using different value cuts for each non-equal time interval, which requires a computational cost for evaluating each objective function. Therefore, surrogate models were implemented to minimize this disadvantage. Nevertheless, each solution found by eMODiTS is a different-sized vector, so the surrogate model must be able to handle data sets under this characteristic. Consequently, this work's contribution lies in analyzing the surrogate models' implementation on the time series discretization, where each potential scheme is a real-number different-sized vector. For this reason, the surrogate model proposed was k-nearest Neighbors for regression with Dynamic Time Warping as a distance measure. Results suggest our proposal finds a suitable approximation to the final eMODiTS solutions with a functions evaluation reduction rate between 15% and 95%. However, according to Pareto front performance measures, the proposal Pareto front is competitive compared to the eMODiTS Pareto front, reaching an average Generational Distance (GD) between 0.0447 and 0.0536. Moreover, the average Hypervolume Ratio (HVR) ranges between 0.334 and 0.3891. Finally, our proposal compared against SAX-based methods presents a similar behavior regarding classification tasks and statistical tests.

Cities are complex systems requiring urban design models that balance order and disorder. Collective creativity initiatives engage citizens in these processes, empowering bottom-up approaches that prioritize people and social well-being within urban development. This paper investigates an 'Urban Laboratory' as a case study, examining the potential of collective creativity to address urban complexity. The successful and ongoing project 'El Campo de Cebada' in Madrid, Spain, demonstrates how a community transformed a vacant lot into a vibrant social hub. The phases of this study include case selection, data collection, data analysis, and presentation of the results. This study identifies key enabling factors, including agents, management, social dynamics, infrastructure, and actions. These insights offer a methodological framework for designing future collaborative, resilient, and inclusive urban spaces, addressing the complex needs of communities within our cities.

As companies increasingly undergo digital transformation, the role of talent management pro-cesses becomes pivotal in enhancing overall organizational performance. The research addresses the significance of talent management in corporate digital transformation, examining whether variations in the digitalization of these processes can be attributed to company size. A qualitative approach was employed, utilizing a questionnaire, collecting responses from 202 organizations across diverse sectors. Findings reveal disparities in digitalization throughout the talent man-agement process, with pronounced presence in the attracting, selecting, and rewarding phases, but diminishing in deployment and development, further declining in planning. A positive cor-relation between company size and adoption of specific digital platforms was observed. Larger enterprises exhibit greater utilization of digital platforms in talent deployment and development. Moreover, corporate communication tools are consistently utilized in the rewarding phase, irre-spective of company size. These findings offer practical insights for organizations to optimize their digitalization strategies based on their scale, thereby contributing to more effective and tailored digitalization endeavors. The uniqueness of this research lies in its exploration of the in-fluence of company size on the digitalization of talent management processes and its potential to explain variations across different stages of these processes.

There is no doubt that seagrass beds constitute one of the most productive ecosystems in shallow coastal waters. Despite this, picoplankton in seagrass ecosystems has received relatively little attention. The purpose of this study was to compare picoplankton growth and mortality rates between seagrass and unvegetated habitats using chamber incubations. We tested two main hypotheses: (i) incubation with seagrass would result in higher bacterial growth rates due to increased DOM release from seagrass photosynthesis, and (ii) Synechococcus spp. would be lower in the presence of seagrass due to competition for inorganic nutrients. Our results showed bacterial growth rates of 2.31 and 2.44 d–1 without and with seagrass, respectively. In seagrass chambers, bacterial growth was higher than that in non-seagrass chambers, suggesting that organic carbon coming from the seagrass community may support bacterial production. Furthermore, we observed a negative Synechococcus spp. growth rate (-0.9 d–1) in the seagrass treatment, likely reflecting nutrient competition with the seagrass. Small-scale chambers proved to be a useful tool for studying the factors controlling spatial and temporal patterns of picoplankton across different habitats. Furthermore, future studies should examine picoplankton growth over a wider range of spatial scales in seagrass beds and adjacent unvegetated sediment.

Mexico is a well-known seismically active country, which is primarily affected by several tectonic plate interactions along the southern Pacific coastline and by active structures in the Gulf of Baja California. In this paper we investigate this seismicity in the context of a non-extensive statistical approach based on Tsallis entropy. The analysis is performed using data from the corrected Mexican seismic catalogue provided by the National Seismic Service, spanning a period from January 2000 to October 2023. The Gutenberg-Richter law fitting to the earthquake sub-catalogues for all six regions studied indicates magnitudes of completeness between 3.30 and 3.76. All six regions display values of the entropic index in the range 1.52≲q≲1.61, which are lower than the previously estimated range 1.54≲q≲1.70 using catalogue data from 1988 to 2010. The cause of this discrepancy is certainly due to the use of modern recording devices, which are sensitive enough to detect a larger number of low-magnitude events compared to older instrumentation.

(1) Background: The purpose of this study was therefore to analyze the predictive capacity of the three variables (impulsivity, sensation-seeking and drug use) in aggressors and victims of violence. (2) Methods: The design is cross-sectional quasi-experimental. A sample of 822 students aged 13 to 18 who had filled in an ad hoc questionnaire, the State Impulsivity Scale and the Sensation-Seeking Scale, was used for this. (3) Results: The results show that aggressors had high levels of gratification, automatism, attentional factor, disinhibition and susceptibility to boredom, and use alcohol and/or tobacco. The variables that could predict involvement as an aggressor in peer conflict are use of alcohol, smoking, high levels of gratification, automatism and attentional factors and a high degree of disinhibition and susceptibility to boredom. The disinhibition is the best predictor of aggressor. (4) Conclusions: Thus having available empirical evidence that facilitates detection of predictive variables for participation in violence is going to favor the design of effective education intervention for reducing risk behavior.

Transcription is carried out in most eukaryotes by three multimeric complexes (RNA polymerases I, II and III). However, plants contain two additional RNA polymerases (IV and V), which have evolved from RNA polymerase II. RNA polymerases II, IV and V contain both common and specific subunits that may specialize some of their functions. In this study, we conducted a search for the genes that putatively code for the specific subunits of RNA polymerases IV and V, as well as the corresponding of RNA polymerase II in olive. Based on the homology with the genes of Arabidopsis thaliana, we identified 13 genes that putatively code for the specific subunits of polymerases IV and V, and 16 genes that code for the corresponding specific subunits of polymerase II in olive. The transcriptomic analysis by RNA-Seq revealed that the expression of the RNA polymerases IV and V genes was induced during the initial stages of fruit development. Given that RNA polymerases IV and V are involved in the transcription of long non-coding RNAs, we investigated their expression and observed relevant changes in the expression of this type of RNAs. Particularly, the expression of the intergenic and intronic long non-coding RNAs tended to increase in the early steps of fruit development, suggesting their potential role in this process. The positive correlation between the expression of RNA polymerases IV and V subunits and the expression of non-coding RNAs supports the hypothesis that RNA polymerases IV and V may play a role in fruit development throughout the synthesis of this type of RNAs.

Migratory movements are a political, social and public health issue on a global scale. Access to sexual and reproductive health services for irregular migrant women (IMW) is a public health issue. The aim of this study is to identify qualitative evidence on IMW's experiences of sexual and reproductive health care in emergency and primary care settings. Methods: meta-synthesis of qualitative studies. Synthesis includes assembling and categorising findings based on the simili-arty in meaning. The search was conducted between January 2010 and June 2022 using PubMed, WOS and CINAHL databases. Results: of 131 articles found in the initial search, only 9 articles met the criteria and were included in the review. Four main themes were established: (1) The need to focus emergency care on sexual and reproductive health, (2) Unsatisfactory clinical experiences, (3) Forced reproduction, (4) Alternating between formal and informal healthcare services. Con-clusions: IMW’s attitudes towards sexual and reproductive health are influenced by culture, ed-ucational level, fear, barriers and the attitude of healthcare providers. Healthcare institutions need to be aware of the IMW’s experiences to understand the specific difficulties they face. IMW call for socially and culturally sensitive health care, cultural mediators, improved communication and safe environments that ensure confidentiality.

The exploration and understanding of sentiments and emotions through textual analysis are foundational to advancements in natural language processing (NLP). While sentiment analysis, which involves discerning the polarity of text, has been extensively explored, the nuanced detection of complex emotions within textual content is still an emerging area of study. In this paper, we introduce EmoLeverage, a model leveraging Transformer architecture and enhanced with a novel Fusion Adapter module. This model aims to deepen emotion detection capabilities by drawing insights from fundamental sentiment analysis tasks, focusing exclusively on textual data. EmoLeverage sets a new standard in the field by demonstrating that deep, nuanced understanding of emotions is achievable through text alone, challenging and surpassing existing methodologies in emotion identification on key datasets. This is a significant step forward, considering the complexity of human emotions and the subtleties involved in their expression through language. By concentrating on textual input, EmoLeverage offers a promising avenue for applications where audio or visual data is not available, highlighting the versatility and potential of text-based emotional analysis. Our approach illustrates the untapped potential of leveraging sophisticated NLP techniques to enhance the detection and comprehension of a wide array of emotions from text. The success of EmoLeverage in outperforming conventional models in emotion recognition tasks underscores the model's effectiveness in parsing and understanding the intricate expressions of human emotions through linguistic cues alone. This achievement paves the way for more accurate, efficient, and nuanced emotion detection tools, potentially transforming various sectors by providing deeper insights into human emotional states through text.

This paper offers a comprehensive examination of the process involved in developing and automating supervised end-to-end machine learning workflows for forecasting and classification purposes. It offers a complete overview of the components (i.e. feature engineering, model selection, etc), principles (i.e. bias-variance decomposition, model complexity, overfitting, model sensitivity to feature assumptions and scaling, output interpretability, etc), models (i.e. neural networks, regression models, etc), methods (i.e. Cross-Validation, data augmentation, etc), metrics (i.e. Mean Squared Error, F1-score, etc) and tools that rule most supervised learning applications with numerical and categorical data, as well as their integration, automation, and deployment. The end goal and contribution of this paper is the education and guidance of the non-AI expert academic community over complete and rigorous machine learning pipelines and data science practices, from problem scoping to design and state-of-the-art automation tools, including basic principles and reasoning in the choice of methods. The paper delves into the critical stages of supervised machine learning workflow development, many of which are often omitted by researchers due to brevity, and covers foundational concepts essential for understanding and optimizing a functional machine learning workflow, thereby offering a holistic view of task-specific application development for applied researchers who are not AI experts.

The livestock sector can be a major contributor to the mitigation of greenhouse (GHG) emissions. Within the sector, beef production produces the largest proportion of the livestock sector’s direct emissions. The objective of this study was to assess the on-farm GHG emissions in semi-arid rangelands in Argentina and to identify the relationships between emissions and current farm management practices. A survey recorded detailed information on farm management and characteristics. Assessments of GHG emissions were based on the IPCC Tier 2 protocols [1]. The relationships between farm management and GHG emissions were identified using General Linear Models. Cluster analysis was used to identify groups of farms that differed from others in emissions and farm characteristics. Emissions per product sold were low on farms that had improved livestock care management, rotational grazing, received technical advice, and had high animal and land productivities. Emissions per hectare of farmland were low on farms that had low stocking rates, low number of grazing paddocks, little or no land dedicated to improved pastures and forage crops, and low land productivity. Our results suggest that the implementation of realistic, relatively easy-to-adopt farming management practices has considerable potential for mitigating GHG emissions in semi-arid rangelands of central Argentina.

The United States is plagued with the highest rates of preventable metabolic diseases it has ever seen, and while poor nutrition is increasingly recognized as a critical contributing factor, good nutrition has been shown to be a potent factor in prevention and management of these illnesses. Notably, nutrition is inextricably intertwined with farming practices and the stewardship of our environment – particularly its soil. In this proposal, we propose a method to expose medical students to basic agricultural and environmental knowledge regarding the production of food, as well as educate them in practical nutrition education within the interactive, case-based, and longitudinal preclinical curriculum at Case Western Reserve University School of Medicine (CWRU SOM). We propose a two-part approach; first: integrating relevant topics in nutrition, culinary medicine, and farming practices into the preclinical blocks through Official Learning Objectives, and second: an optional 8-week, zero credit elective for students interested in pursuing a deeper understanding of these topics. Through these interventions, we believe courses like this will support a generation of physicians able to understand health from soil to plate with a consideration for the environment in addition to exemplifying healthful lifestyles themselves. We believe these kinds of future physicians will be the most effective in treating (and ideally reversing) the chronic disease epidemic.

Sea-level rise is a problem increasingly affecting coastal areas worldwide. The existence of Free and Open-Source Models to estimate the sea-level impact can contribute to better coastal man-agement. This study aims to develop and to validate two different models to predict the sea-level rise impact supported by Google Earth Engine (GEE) – a cloud-based platform for planetary-scale environmental data analysis. The first model is a Bathtub Model based on the uncertainty of projections of the Sea-level Rise Impact Module of TerrSet - Geospatial Monitoring and Modeling System software. The validation process performed in the Rio Grande do Sul coastal plain (S Brazil) resulted in correlations from 0.75 to 1.00. The second model uses Bruun Rule formula implemented in GEE and is capable to determine the coastline retreat of a profile through the creation of a simple vector line from topo-bathymetric data. The model shows a very high cor-relation (0.97) with a classical Bruun Rule study performed in Aveiro coast (NW Portugal). The GEE platform seems to be an important tool for coastal management. The models developed have been openly shared, enabling the continuous improvement of the code by the scientific commu-nity.

Sea-level rise is a problem increasingly affecting coastal areas worldwide. The existence 15 of Free and Open-Source Models to estimate the sea-level impact can contribute to better coastal 16 management. This study aims to develop and to validate two different models to predict the 17 sea-level rise impact supported by Google Earth Engine (GEE) – a cloud-based platform for plan-18 etary-scale environmental data analysis. The first model is a Bathtub Model based on the uncer-19 tainty of projections of the Sea-level Rise Impact Module of TerrSet - Geospatial Monitoring and 20 Modeling System software. The validation process performed in the Rio Grande do Sul coastal 21 plain (S Brazil) resulted in correlations from 0.75 to 1.00. The second model uses Bruun Rule for-22 mula implemented in GEE and is capable to determine the coastline retreat of a profile through the 23 creation of a simple vector line from topo-bathymetric data. The model shows a very high correla-24 tion (0.97) with a classical Bruun Rule study performed in Aveiro coast (NW Portugal). The GEE 25 platform seems to be an important tool for coastal management. The models developed have been 26 openly shared, enabling the continuous improvement of the code by the scientific community.

Solid-state batteries (SSBs) have emerged as a promising alternative to conventional lithium-ion batteries, with notable advantages in safety, energy density, and longevity, yet the environmental implications of their lifecycle, from manufacturing to disposal, remain a critical concern. This review paper examines the environmental impacts associated with the production, use, and end-of-life management of SSBs, starting with the extraction and processing of raw materials which highlights significant natural resource consumption, energy use, and emissions. A comparative analysis with traditional battery manufacturing underscores the environmental hazards of novel materials specific to SSBs. The review also assesses the operational environmental impact of SSBs by evaluating their energy efficiency and carbon footprint in comparison to conventional batteries, followed by an exploration of end-of-life challenges including disposal risks, regulatory frameworks, and the shortcomings of existing waste management practices. A significant focus is placed on recycling and reuse strategies, reviewing current methodologies like mechanical, pyrometallurgical, and hydrometallurgical processes, along with emerging technologies that aim to overcome recycling barriers, while also analyzing the economic and technological challenges of these processes. Additionally, real-world case studies are presented, serving as benchmarks for best practices and highlighting lessons learned in the field. In conclusion, the paper identifies research gaps and future directions for reducing the environmental footprint of SSBs, underscoring the need for interdisciplinary collaboration to advance sustainable SSB technologies and contribute to balancing technological advancements with environmental stewardship, thereby supporting the transition to a more sustainable energy future.

We overview the main equations of the Rayleigh-Ritz variational method and discuss their connection with the problem of simultaneous diagonalization of two Hermitian matrices.

We discuss in detail a well known method for obtaining the frequencies of the normal modes of coupled harmonic oscillators that is based on the simultaneous diagonalization of two symmetric matrices. We apply it to some simple illustrative examples recently chosen for the presentation of an alternative approach based on a set of constants of the motion. We show that the traditional method is simpler, even in the case of equal frequencies. We also discuss a problem that commonly appears in elementary courses on quantum mechanics that also requires the diagonalization of two symmetric matrices.

The potential of sodium alginate (ALG) and gum arabic (GA) as wall polymers for L-ascorbic acid (AA) encapsulation as a tool for their preservation against the thermo-oxidative degradation was investigated. The influence of such polymers used as wall material on the AA-content, size, encapsulation efficiency, encapsulation yield and thermo-oxidative stability were evaluated. The AA-microparticles were obtained using the spray-drying technique. An experimental Taguchi design was employed to assess the influence of the variables in the encapsulation process. The microparticles morphology and size distribution were characterized by scanning electron microscopy and laser diffraction. The thermal stability of AA microparticles was studied by differential scanning calorimetry and thermogravimetry analysis. This work points out the viability to encapsulate AA using GA and ALG through a spray-drying process. In general, a product yield ranging from 35.1% to 83.2% and an encapsulation efficiency above 90% was reached. Spherical microparticles with a smooth surface were obtained with a mean diameter around 6 μm and 9 μm for the those prepared with GA and ALG, respectively. The thermo-oxidative analysis showed that both polymers allow maintaining AA stable up to 188 °C, which is higher than the traditional processing temperature used in the fish feed industry.

Current antibiograms cannot discern the particular effect of a specific antibiotic when the bacteria are incubated with a mixture of antibiotics. To prove that this task is achievable, Escherichia coli strains were treated with ciprofloxacin for 45 min, immobilized on a slide and stained with SYBR Gold. In susceptible strains, the nucleoid relative surface started to decrease near the MIC, being progressively condensed as dose increased. The shrinkage level correlated with the DNA fragmentation degree. Ciprofloxacin-resistant bacilli showed no change. Additionally, E. coli strains were incubated with ampicillin for 45 min and processed similarly. The ampicillin-susceptible strain revealed intercellular DNA fragments that increased with dose, unlike the resistant strain. Co-incubation with both antibiotics revealed that ampicillin did not modify the nucleoid condensation effect of ciprofloxacin, whereas the quinolone partially decreased the background of DNA fragments induced by ampicillin. Sixty clinical isolates, with different combinations of susceptibility-resistance to each antibiotic, were co-incubated with the EUCAST breakpoints of susceptibility of ciprofloxacin and ampicillin. The morphological assay correctly categorized all the strains for each antibiotic in 60 min, demonstrating the feasible independent evaluation of a mixture of quinolone and beta-lactam. The rapid phenotypic assay may shorten the incubation times and necessary microbial mass currently required for evaluation.

This work assesses sea-level rise using three different models created on Free and Open-Source Software for Geographic Information System (FOSS4GIS). Based on regional projections of Special Report on Climate Change and Oceans and Cryosphere (SROCC) of the Intergovernmental Panel on Climate Change (IPCC), the models were applied to a case of study on Rio Grande do Sul coast – Brazil under different sea-level rise scenarios by the end of this century. The End Point Rate for QGIS (EPR4Q), calculates a shoreline projection using End Point Rate method. The Uncertainty Bathtub Model (uBTM), analyses the sea-level rise impact by the uncertainty of sea-level projec-tions and vertical error of the Digital Elevation/Terrain Model (DEM/DTM). The Bruun Rule for Google Earth Engine Model (BRGM) predicts the shoreline position with sea-level rise, using topographic and bathymetric data from Unmanned Aerial Vehicles (UAV) and Coastal Modelling System (SMC – Brazil), respectively. The results indicated a maximum shoreline retreat for 2100 of -502 m and -1727 m using EPR4Q and BRGM, correspondingly. The uBTM using the land-use of Mapbiomas showed a maximum of 44.57 km2 of urban area impacted by the sea-level flood. This research highlights the possibility of performing coastal management analysis in GIS environ-ment using non-commercial software.

A pathway frequently altered in cancer is glutaminolysis where glutaminase (GA) catalyses the main step: the deamidation of glutamine to form glutamate and ammonium. There are two types of GA isozymes, named GLS and GLS2, which differ considerably in their expression patterns and can even perform opposing roles in cancer. GLS correlates with tumor growth and proliferation, while GLS2 may function as a context-dependent tumor suppressor. However, both isoenzymes have been described as essential molecules handling oxidant stress because of their involvement in glutathione production. We have reviewed the literature to highlight the critical roles of GLS and GLS2 to restrain ROS and regulate both cellular signaling and metabolic stress due to their function as indirect antioxidant enzymes and also by modulating both reductive carboxylation and ferroptosis. Blocking GA activity appears to be a potential strategy to dual activate ferroptosis and inhibit cancer cell growth in a ROS-mediated mechanism.

The present study reports on the fabrication and performance of ammonia sensors based on single-walled carbon nanotubes (SWCNTs) coated with gold nanoparticles (AuNPs). The sensors were subjected to controlled concentrations of ammonia at two temperatures, namely 25 oC and 140 oC, and their response was monitored through successive cycles of ammonia exposure and nitrogen purging. The results demonstrate that the sputtering-based deposition of AuNPs on SWCNTs led to the best sensor performance, characterized by a rapid increase in resistance values upon exposure to ammonia, and efficient recovery at 140 oC. By contrast, the sensor with chemically impregnated AuNPs exhibited a slower response time. Furthermore, a novel device was developed that combined MoS2-AuNPs (sputtering)-SWCNTs, and it showed improved sensor performance compared to the devices with only AuNPs. Overall, the study provides valuable insights into the fabrication and optimization of SWCNT-based ammonia sensors for various applications, especially for detecting and quantifying small amounts of ammonia (concentrations below 1 ppm).

After brings about a brief review of the theoretical explanations and researches on the reasons for being a victim, this article is organized into two sections. The first presents a comparative analysis of the data for 1999 and 2016 in terms of perceptions, profiles and most significant sociodemographic and socioeconomic variables. The second one shows an explanatory analysis based on a multivariate logistical regression model using as an independent variable lifestyle of the population and socioeconomic variables, and as dependent variables individual’s susceptibility to becoming a victim of certain crimes. The results points towards an explanatory model of victimization in which sociodemographic variables play an increasingly less important role while variables related to lifestyle and subjective perceptions make a significant contribution to greater understanding of the nature of being the victim of a crime.

This study aims to identify the model that best approximates the credit spread that should be fixed on debt instruments issued by both public and private companies, considering the particularities of the Mexican market. Five models were analyzed: Merton's [1], those proposed by Denzler et al., the one presented in this paper, which includes the conformable derivatives, taking as a reference the change of variable made by Morales-Bañuelos et al., and the Corporate Default Risk Model (DRSK) for Publics Firms of Bloomberg [4]. The required financial information was obtained from the Bloomberg platform, from which the probabilities of default, credit spreads, and credit ratings for each company in the sample under the model (DRSK) were extracted directly. Likewise, the program developed by Moody's K.M.V. was used to obtain the EDF (Expected Default Frequencies). It was concluded that the Modified Merton model approximates to a greater extent the credit spreads that fix on a prime rate on the loans granted to the Mexican non-financial companies.

In this work, we investigate by ab initio calculations and optical experiments the sensitiv- ity of graphene quantum dots in their use as devices to measure the presence, and concentration, of heavy metals in water. We demonstrate that the quenching or enhancement in the optical response (absorption, emission) depends on the metallic ion considered. In particular, two test cases of opposite behaviour are considered: Cd 2+ , where we observe an increase in the optical response for increasing concentration, and Pb 2 whose emission spectra are quenched along the concentration rise. We envisage that quantum dots of graphene may be routinely used as cheap detectors to measure the degree of poisoning ions in water

Transition metal complexes have historically played a pivotal role in creating vibrant pigments utilized across artistic mediums such as ceramics, paintings, and glass mosaics. Despite their extensive historical use, our understanding of the mechanisms governing transition metal complex behavior has predominantly emerged in recent times, leaving numerous aspects of this process ripe for exploration. These complexes exhibit striking color variations under diverse conditions when employed in pigment formulations. This review utilizes a bottom-up scientific approach, spanning from microscopic to macroscopic scales, to unravel the molecular origins of the colors generated by transition metal complexes in pigments and ceramic glazes. Advanced spectroscopy techniques and computational chemistry play pivotal roles in this endeavor, highlighting the significance of understanding and utilizing analytical data effectively, with careful consideration of each technique's specific application. Furthermore, the review investigates the influence of processing conditions on color variations, providing valuable insights for artists and manufacturers aiming to enhance the precision and quality of their creations while mitigating environmental impact.

This paper presents the validation of the End Point Rate (EPR) tool for QGIS (EPR4Q), a tool built-in QGIS Graphical Modeler to calculate the shoreline change by End Point Rate method. The EPR4Q tries to fill the gap of user-friendly and free open-source tool for shoreline analysis in Geographic Information System environment, since the most used software - Digital Shoreline Analysis System (DSAS) - although is a free extension, is suited for commercial software. Besides, the best free open-source option to calculate EPR called Analyzing Moving Boundaries Using R (AMBUR), since it is a robust and powerful tool, the complexity and heavy processes can restrict the accessibility and simple usage. The validation methodology consists of applying the EPR4Q, DSAS, and AMBUR on different examples of shorelines found in nature, extracted from the U.S. Geological Survey Open-File. The obtained results of each tool were compared with Pearson correlation coefficient. The validation results indicate that the EPR4Q tool created acquired high correlation values with DSAS and AMBUR, reaching a coefficient of 0.98 to 1.00 on linear, extensive, and non-extensive shorelines, guarantying that the EPR4Q tool is ready to be freely used by the academic, scientific, engineering, and coastal managers communities worldwide.

In coastal areas around the world, seagrass meadows play a crucial ecological and economic role. A large amount of seagrass beds dominates primary production and contributes to the high secondary productivity of this ecosystem. The microbial loop (consuming bacterial biomass by grazers and using seagrass-derived detritus by bacteria) may be an important mechanism for transferring seagrass-derived organic matter to the aquatic food chain. This study aims to improve our understanding of how bacterial growth and mortality (grazing and viral lysis rates) differ in seagrass and adjacent unvegetated meadow habitats. We found that viral lysis and grazing caused similar mortality rates of bacteria in a seagrass environment during the summer. It has been found, however, that bacterial production is controlled by the availability of resources (bottom-up control) and is cycled within the bacteria-virus-DOC loop in adjacent unvegetated waters. Our study region may be affected by this shift in organic matter fate and cycling.

The analysis of curated genomic, metagenomic, and proteomic data are of paramount importance in the fields of biology, medicine, education, and bioinformatics. Although this type of data is usually hosted in raw form in free international repositories, its access requires plenty of computing, storage, and processing capacities for the domestic user. The purpose of the study is to offer a comprehensive set of genomic and proteomic reference data, in an accessible and easy-to-use form to the scientific community. A representative type material set of genomes, proteomes and metagenomes were directly downloaded from the site: https://www.ncbi.nlm.nih.gov/assembly/ and from Genome Taxonomy Database, associated with the major groups of Bacteria, Archaea, Virus, and Fungi. Sketched databases were subsequently created and stored on handy raw reduced representations, by using Mash software. Our dataset contains near to 100 GB of space disk reduced to 585.78 MB and represents 87,476 genomics/proteomic records from eight informative contexts, which have been prefiltered to make them accessible, usable, and user-friendly with computational resources. Potential uses of this dataset include but are not limited to, microbial species delimitation, estimation of genomic distances, genomic novelties, paired comparisons between proteomes, genomes, and metagenomes.

This article provides an overview of multi-fidelity modeling trends. Fidelity in modeling refers to the level of detail and accuracy provided by a predictive model or simulation. Generally, models with higher fidelity deliver more precise results but demand greater computational resources. Multi-fidelity models integrate high-fidelity and low-fidelity models to obtain fast yet accurate predictions. Their growing popularity is due to their ability to approximate high-fidelity models with high accuracy and low computational cost. This work classifies publications in multi-fidelity modeling based on various factors, including application, surrogate selection, fidelity difference, fidelity combination method, field of application, and year of publication. The study also examines the techniques used to combine fidelities, focusing on multi-fidelity surrogate models. To accurately evaluate the advantages of utilizing multi-fidelity models, it is necessary to report the achieved time savings. This paper includes guidelines for authors to present their multi-fidelity-related savings in a standard, succinct, yet thorough way to guide future users. According to a select group of publications that provided sufficient information, multi-fidelity models achieved savings of up to 90% while maintaining the desired level of accuracy. However, the savings achieved through multi-fidelity models depend highly on the problem.

This article analyses from a post-Marxist view, particularly, an ecological and gender-oriented perspective, the perception and attitudes of the Mexican people by gender, political affiliation and income level towards such current environmental issues as global warming, water shortage, water pollution and the influence of economic growth on the environment, among others. It highlights the influence of political ideology on the environment and of gender awareness on conservation and a more positive attitude towards ecological issues, despite women having usually been excluded from the administrative and decision-making arenas. A new theoretical model is proposed related to the Responsibility Footprints, a new concept more critical than the neoliberal Corporate Social Responsibility. The data for this study come from the 2012 International Social Survey Program. The results analysed brought to light some relevant questions for designing public policies that will greatly bolster initiatives to prompt better female professional involvement in the conservation of natural resources.

Effective teamwork is essential to the success of sport and athletic organizations. Interprofessional Collaboration (IPC) and team-based care has also been identified as a priority for health and social care organizations.(World Health Organization, 2010) The Interprofessional Education Collaborative (IPEC) Core Competencies of (1) Values and Ethics; (2) Roles and Responsibilities; (3) Communication; and (4) Teams and Teamwork provide a guiding framework for IPC. (Interprofessional Education Collaborative, 2023). Student-athlete well-being is a key objective for individuals working with or for university athletic departments, with high levels of well-being being correlated with sport, academic, and personal improvements (Navarro et al., 2020). Due to the multifaceted factors that influence student-athlete well-being (e.g., cultural factors, coaches, academic pressure, family stress, etc.), there is an increasing need for an interdisciplinary/interprofessional approach to well-being (Lemelin et al., 2022, Navarro et al., 2020; Ulrich et al., 2022) However, significant barriers exist in implementing IPC into university athletic departments and little research exists on how to overcome roadblocks to integrating IPC in university athletic departments for enhancing student-athlete wellness. This paper will describe how a university athletic department used a team approach to enhance student-athlete health and well-being. The Interprofessional Wellness Team (IWT) included a clinical sport psychology doctoral student, a licensed mental health professional, athletic trainer, and sport dietitian. A case vignette is used to demonstrate how IPEC core competencies are operationalized by the team to address athlete health and well-being through IPC. Recommendations on the further implementation of IPC centered around student-athlete well-being will be provided.

In commercial terms, Virgin Olive Oil (VOO) is considered an exceptional food of excellent sensory and nutritional quality, for its taste and genuine odour and, as well as for its bioactive compounds, of a great interest for the health. This quality can be affected by oxidative degradation, chemical as well as enzymatic (activity of oxidative endogenous enzymes from polyphenol oxidase and peroxidase olive fruit type), of essential components during extraction and conservation of VOO. In the bibliography, the reduction of oxygen during the malaxation process and the storage of the oil has been studied in different ways. However, research about the reduction of oxygen in the crushing of olive fruit, malaxation of the paste and/or both at the same time in “real extraction condition” is scarce. The reduction of oxygen has been compared to control conditions (concentration of atmospheric oxygen of 21%). Batches of 200 kg of olive fruit, Picual cultivar, were used and the following treatments were applied: Control (21% O2 Mill - 21% O2 Mixer), “IM-NM”: Inerted milling -Normal malaxation (6.5% O2 Mill-21% O2 Mixer), “NM-IM”: Normal milling-Inerted malaxation (21% O2 Mill-4 % O2 Mixer) and “IM-IM”: Inerted milling-Inerted malaxation (5.5% O2 Mill-10% O2 Mixer). The parameters of commercial quality covered by Regulation: free acidity, peroxide value and absorbency in ultra-violet (k 232 and k270) did not suffer any change in relationship to the control, the oils belong to the comercial category of “Extra virgin olive oil”. The phenolic compounds are involved in the distinctive bitter and purgent taste and, their healthy properties and their oxidative stability, increased with the downsizing amounts of oxygen regarding control and the IM-NM, NM-IM and IM-IM treatments with an average of 4, 10 and 20 %, respectively. By contrast, total volatile compounds decrease between a 10-20 % in all oxygen reduction treatments. The volatile compounds arising from lipoxygenase pathway, which are responsable for the green and fruity notes of VOO, also decreased their concentration with the treatments, between 15-20%. The results show how the reduction of oxygen in the milling and malaxation stages of olive fruit can modulate the content of phenols, volatile compounds, carotenoids and chlorophyll pigments of the VOO avoiding the degradation of compound with sensorial and nutritional interest.

The management of shoulder instability in children and adolescents is a challenging field of orthopaedics. There are several complicating factors which originate from the variable underlying cause that is often a unique combination of traumatic factors, ligamentous laxity, and the pattern of muscle contractility. As the cause is often multifactorial, this makes interpretation of the literature difficult as nomenclature is variable. The purpose of this review is to shed light on the nuances of paediatric and adolescent shoulder instability.

Atopic dermatitis (AD) is a protease-modulated chronic disorder with heterogenous clinical manifestations which may lead to an imprecise diagnosis. So far, there are no diagnostic protease tests for AD. We explored the gingival crevicular fluid (GCF) protease profile of periodontally-healthy individuals with moderate/severe AD compared to healthy controls. An exploratory case-control study was conducted. Matching AD patients (n=6) and controls (n=6) were enrolled at the International Center for Clinical Studies, Santiago, Chile. Complete dermatological and periodontal evaluations (involving the collection of GCF samples) were made. The levels of 35 proteases were analyzed using a human protease antibody array. The GCF levels of zinc-binding ADAM8, ADAM9, MMP8 and Neprilysin/CD10, aspartyl-binding Cathepsin E, and serin-binding Protein convertase9 and uPA/Urokinase proteases were lower in moderate/severe AD patients compared to controls (p<0.05). No inter-group differences in the levels of the other 28 proteases were found. MMP8, Cathepsin E and ADAM9 were the biomarkers with the highest sensitivity and specificity regarding the detection of AD (p < 0.05). The area under receiver operating characteristic (ROC) curve for MMP-8+ADAMP-9 was 0.90. In conclusion, differences in the protease profile between AD and control patients associated with MMP8, Cathepsin E and ADAM9. MMP8, ADAM9 and Cathepsin E may be useful as combined diagnostic and therapeutic biomarkers of moderate/severe AD.

Our hypothesis that controlled ozone applications interfere into the redox balance of the biological organism (first published in 1998 with a preclinical trial on protecting the liver from CCl4 intoxication), has been verified over the last 2 decades in reactive oxygen species (ROS)-induced mitochondrial pathologies, such as rheumatoid arthritis, osteoarthritis, aging processes, diabetes-2 and in prevention of intoxications. Low-dose ozone acts as a redox bioregulator: The restoration of the disturbed redox balance is comprehensible in a number of preclinical and clinical studies by a remarkable increase of the antioxidant repair markers, here mainly shown as glutathione increase and a reduction in oxidative stress markers, mainly malondialdehyde. The mechanism of action is shown, relevant data are displayed, evaluated and comprehensively discussed: The repair side of the equilibrium increases by 21% up to 140% compared to the non-ozone treated groups and depending on the indication; the stress markers are simultaneously reduced, the redox system regains its balance.

Chagalapoli fruit (Ardisia compressa) is similar to Vaccinium myrtillus (berries) with high-polyphenol content. The objective of this study was to evaluate the physicochemical properties of Chagalapoli fruit and to determine the conditions for the preparation of a fermented beverage using Saccharomyces cerevisiae yeast, evaluating the impact on sensory properties. The fermentation process lasted 4 days at 27 °C, with absence of light and a fixed pH of 3.8. The phenolic contents obtained in samples according to chromatograms were 1.27 mg(EPI)/mL in filtered juice, 1.59 mg(EPI)/mL in filtered fermented beverage, 1.91 mg(EPI)/mL in partially filtered juice and 3.19 mg(EPI)/mL in partially filtered fermented beverage. An affective test was carried out to determine the sensory acceptability of the final product, evaluating the flavor, color and aroma parameters. The fermented beverage with the greatest preference on color and flavor attributes was the partially filtered fermented beverage.

1) Background: Studies have shown that there is a higher risk of burnout among employees in the healthcare sector. Therefore, this study focused on “Certified Nursing Aides” (CNAs) who have shown a high prevalence of burnout, and are therefore considered an especially vulnerable group. The objective of this study was to identify the relationships between some organizational, personal and sociodemographic factors and burnout; 2) Methods: The final study sample was made up of 278 working CNAs with a mean age of 40.88 (SD=9.41). To compile the data, an ad hoc questionnaire was used to collect sociodemographic information, and to collect professional and employment information, the Brief Emotional Intelligence Inventory for Adults, the Brief Questionnaire on Perceived Social Support, and The General Self-Efficacy Scale.; 3) Results: The results show that the Burnout Syndrome is significantly related negatively to all the emotional intelligence factors, self-efficacy and perceived social support. The risk of burnout is higher in younger persons and in permanently employed professionals. General self-efficacy and stress management act as protective factors against the likelihood of burnout.; and 4) Conclusions: This study suggests that organizations should urge coaching and transformational leadership training programs to promote the wellbeing and organizational commitment of workers.

The purpose of this longitudinal study was to determine the effects of a rowing training program on physical fitness and body composition in female breast cancer survivors (56.78 ± 6.38 years). Over six months, the participants (n=40) performed two training sessions per week for an average of 75 minutes, combining resistance and muscle strength exercises with rowing. To evaluate the impact of the program, physical fitness tests and anthropometric measurements were carried out before and after the training protocol. The results show statistically significant improvements in measures such as weight (-1.84 kg), BMI (-0.7 kg/m2), hip (-3.24 cm) and waist circumference (-2.45 cm). In addition, variables associated with physical fitness also improved including leg strength (3.04 cm), dominant handgrip strength (4.24 kgf), non-dominant handgrip strength (3.49 kgf), aerobic endurance (78.35 m) and muscle flexibility (3.96 cm). We can therefore conclude that a rowing-based exercise program is an effective strategy to improve physical fitness in this type of population, yielding improvements in both anthropometric measurements and basic physical capacity variables, essential factors for better health and quality of life.

Water stress is one of the main factors affecting the development of agricultural crops. An inno-vative alternative to improve tolerance to water stress is the application of biostimulants. In the present study, the efficacy and physiological and biochemical responses of different biostimulants were evaluated in beans under moderate and severe stress. The treatments consisted of three types of irrigation: FC100, without water stress, FC75, irrigation reduced by 25% (moderate water stress) and FC50, irrigation reduced by 50% (severe water stress). In the treatments with water deficit, foliar biostimulants were applied: zinc oxide nanoparticles plus chitosan, Codasil®, Osmoplant®, Stimplex® and salicylic acid. Foliar application of ZnO + chitosan nanoparticles benefited biomass accumulation and yield under moderate water stress (FC75) and Codasil® and Osmoplant® under severe water stress (FC50). Proline, free sugars and gas exchange were higher under the application of ZnO + chitosan nanoparticles under moderate water stress and under Codasil® and Osmoplant® under severe water stress. Depending on the severity of water stress, ZnO + chitosan nanoparticles, Codasil® and Osmoplant® are viable products to increase tolerance in green bean cv. Strike plants.

The best form of prevention against human infection through bacteria, viruses and other parasites is ozone disinfection of wastewater and drinking water as a highly effective, well-known method. As a therapeutic measure, various preclinical studies showed promising results, which are being revisited and reconsidered in times of pandemics and led to interesting results in recent clinical trials and reports, as presented by the example of protective measures against covid-19 in particularly vulnerable clinical personnel. In patients with rheumatoid arthritis, repeated ozone treatments have led to new findings in the "immunomodulation" through ozone. The more effective immune response is discussed as the response of innate immune memory and opens interesting aspects for complementary treatment of autoimmune diseases.

Objective: This systematic review investigates the diagnostic, prognostic, and therapeutic implications of immunohistochemical markers in dentigerous cysts (DC) and odontogenic keratocysts (OKC) associated with impacted third molars. Materials and Methods: A comprehensive search strategy was employed across major databases including MEDLINE/PubMed, EMBASE, and Web of Science, from the inception of the databases to March 2024. Keywords and Medical Subject Heading (MeSH) terms such as "dentigerous cysts," "odontogenic kerato-cysts," "immunohistochemistry," "Ki-67," and "p53" were used. The PRISMA 2020 guidelines were followed to ensure methodological rigor. Inclusion criteria encompassed studies on humans and animals providing de-finitive diagnoses or specific signs and symptoms related to DC and OKC, with results on protein expression derived from immunohistochemistry, immune antibody, proteomics, or protein expression methods. Results: Of the 159 studies initially identified, 138 met the inclusion criteria. Our analysis highlighted sig-nificantly higher expressions of Ki-67 (22.1% ± 4.7 vs. 10.5% ± 3.2, p < 0.001), p53 (15.3% ± 3.6 vs. 5.2% ± 1.9, p < 0.001), and Bcl-2 (18.4% ± 3.2 vs. 8.7% ± 2.4, p < 0.001) in OKCs compared to DCs, indicating a higher proliferative index, increased cellular stress, and enhanced anti-apoptotic mechanisms in OKCs. Ad-ditionally, PCNA levels were higher in OKCs (25.6% ± 4.5 vs. 12.3% ± 3.1, p < 0.001). Genetic mutations, particularly in the PTCH1 gene, were frequently observed in OKCs, underscoring their aggressive behavior and potential malignancy. Conclusion: The findings emphasize the significant role of immunohistochemical markers in distinguishing between DCs and OKCs, with elevated levels of Ki-67, p53, Bcl-2, and PCNA in OKCs suggesting a higher potential for growth and recurrence. Genetic insights, including PTCH1 mutations, further support the need for personalized treatment approaches. These markers enhance diagnostic accuracy and inform targeted thera-peutic strategies, potentially transforming patient management in oral and maxillofacial surgery.

This paper presents a new methodology that provides the analysis of surface texture changes in areas adjacent to the volcano and its impact product of volcanic activity. To do this, algorithms from digital image processing such as the co-occurrence matrix and the wavelet transform are used. These methods are working on images taken by the Landsat satellite platform sensor 5 TM and Landsat 7 ETM + sensor, and implemented with the purpose of evaluating superficial changes that can warn of surface movements of the volcano. The results were evaluated by similarity metrics for grayscale images, and validated in two different scenarios that have the same type of eruption, but differ, essentially, in climate and vegetation. Finally, the proposed algorithm is presented, setting the parameters and constraints for implementation and use.

This experimental research presents an easier model for fitting experimental results that can be simulate the dynamical behaviour of a single degree freedom system, SDFS, subjected in a forced vibration in a shaking table. The fractional damping using a Kelvin-Voigt fractional derivative rheological model, KVFRdm, to represent a fractional oscillator and compare with the experimental model.

Sarcopenia is an age-related condition that involves a progressive decline in muscle mass and function, leading to increased risks of falls, frailty, and mortality. Although the exact mechanisms are not fully understood, aging-related processes like inflammation, oxidative stress, reduced mitochondrial capacity, and cell apoptosis contribute to this decline. Disruption of the circadian system with age may initiate these pathways in skeletal muscle, preceding the onset of sarcopenia. At present, there is no pharmacological treatment for sarcopenia, only resistance exercise and proper nutrition may delay its onset. Melatonin, derived from tryptophan, emerges as an exceptional candidate for treating sarcopenia due to its chronobiotic, antioxidant, and anti-inflammatory properties. Its impact on mitochondria, organelle where it is synthesized and crucial in aging skeletal muscle, further highlights its potential. In this review, we discuss the influence of clock genes in muscular aging, with special reference to peripheral clock genes in the skeletal muscle, as well as their relationship with melatonin, which is proposed as a potential therapy against sarcopenia.

Epithelial ovarian cancer is an aggressive disease of the female reproductive system and a leading cause of cancer death in women. Standard of care includes surgery and platinum-based chemotherapy yet patients continue to experience a high rate of recurrence and metastasis. Hyperthermic intraperitoneal chemotherapy (HIPEC) treatment in highly selective patients extends overall survival by nearly 12 months. The clinical studies are highly supportive of the use of HIPEC in the treatment of ovarian cancer though the therapeutic approach is limited to academic medical centers. The mechanism underlying HIPEC benefit remains unknown. The efficacy of HIPEC therapy is impacted by several procedural and patient/tumor factors including the timing of surgery, platinum sensitivity, and molecular profiling such as homologous recombination deficiency. The present review aims to provide insight into the mechanistic benefit of HIPEC treatment with a focus on how hyperthermia activates the immune response, induces DNA damage and impairs DNA damage repair pathways, and has a synergistic effect with chemotherapy, with the ultimate outcome of increasing chemosensitivity. Identifying the points of fragility unmasked by HIPEC may provide the key pathways that could be the basis of new therapeutic strategies for ovarian cancer patients.

Background: Underreporting of Visceral Leishmaniasis (VL) in India remains a problem to public health controls. Effective and reliable surveillance systems are critical for monitoring disease outbreaks and public health control programs. However, in India, government surveillance systems are affected by levels of scarcity in resources and therefore, uncertainty surrounds the true incidence of asymptomatic and clinical cases, affecting morbidity and mortality rates. The State of Bihar alone contributes up to the 40\% of the worldwide VL cases. The inefficiency of surveillance systems occurs because of multiple reasons including delay in seeking health care, accessing non-authentic health care clinics, and existence of significant asymptomatic self healing infectious cases. This results in a failure of the system to adequately report true transmission rates and number of symptomatic cases that have sought medical advice (thus, high underreporting of cases). Objectives and Methods: There are several methods to estimate the extent of underreporting in the surveillance system. In this research, we use a mathematical dynamic model and two different types of data sets, namely, monthly incidence for 2003-2005 and yearly incidence from 2006-2012 from the Bihar's 21 most VL affected districts out of its 38 districts. The goals of the study are to estimate critical metrics to measure level of transmission and to evaluate the estimation process between the two data sets and 21 districts. In particularly, our focus is on (i) estimating infection transmission potential, underreporting level in incidence and proportion of self-healing cases, (ii) quantifying reproduction number of the$R_0$, and (iii) comparing underreporting incidence levels and proportion of self-healing cases between the two periods 2003-2005 and 2006-2012 and between 21 districts. Results: Our research suggests that the number of asymptomatic individuals in the population who eventually self-heal may have a significant effect on the dynamics of VL spread. The estimated mean self-healing proportion (out of all infected) is found to be $\sim 0.6$ with only 7 out of 21 affected districts having self-healing proportion less than $0.5$ for both data sets. The estimated mean underreporting level is at least $64$\% for the state of Bihar. The estimates of the basic reproduction numbers obtained are similar in magnitude for most of the districts, being in the range of (0.88, 2.79) and (0.98, 1.01) for 2003-2005 and 2006-2012, respectively. Conclusions: The estimates for the two types (monthly and yearly) of temporal data suggest that monthly data are better for estimation if less number of data points are available, however, in general, using such data set results in larger variances in parameters as compared to estimates obtained through aggregated yearly data. Estimated values of transmission related metrics are lower than those obtained from earlier analyses in the literature, and the implications of this for VL control are discussed. The spatial heterogeneity in these control metrics increases the risk of epidemics and makes the control strategies more complex.

Background: Since the beginning of the 20th century, the importance of creating healthy work environments and promoting the health of workers in the healthcare sector to create Healthy and Resilient Organizations has been emphasized. In this context, self-esteem is an essential construct which influences health and healthy life styles, and therefore, the general wellbeing of nurses. The objective of this study was to analyze the mediating role of reasons for exercising in the effect that self-esteem has on uncontrolled eating by nursing professionals. Methods: The sample was made up of 1094 nurses who were administered the Rosenberg General Self-esteem Scale, the Goal Content for Exercise Questionnaire and the Three-Factor Eating Questionnaire-R18. Results: Bivariate correlation analysis and multiple mediation analysis showed that self-esteem has direct and indirect effects on uncontrolled eating. More so, self-esteem predicts doing physical exercise to improve one’s image, recognition and social affiliation, although the effects on uncontrolled eating were only significant through image. Conclusions: The results have important practical implications in the framework of Positive Occupational Health Psychology (POHP) as it emphasizes self-esteem, physical exercise and eating as essential aspects of the health and wellbeing of employees in the healthcare sector, highlighting the importance of creating organizations committed to promoting the psychosocial health of their workers.

The main purpose of the study was to study the effects of a specific rowing ergometer training program on the athletic performance of young adolescents (n=56; 11.73 ± 1.4 years old) com-pared to a workout based on general strength training. Eight-week training program was im-plemented, with four sessions per week and two-hours per session. Sample was divided in two groups: a control group (CG) that performed circuit training with exercises aimed at building general strength and an experimental group (EG) who focused on specifically training on a rowing ergometer (rowing machine). The data obtained in a rowing meter test over the compe-tition distance were analyzed to obtain the average power attained (W) at the beginning of the training, at the middle (4 weeks), at the end of the training (8 weeks) and one year after the ex-perimentation. The results show that, although both forms of training improve the average W obtained in both categories, the EG subjects (+29.94W) obtained better averages in all phases of the study compared to the CG (+5.88W). Furthermore, this increase was greater in male rowers (+ 34.06W) than in female rowers (+24.54W). These results reveal that a specific rower rowing ergometer training program has a significant effect than a general strength program and these effects can even be observed a year after the intervention.

Although it may seem paradoxical, primary care and mental health professionals develop prejudices and discriminatory attitudes towards people with mental health problems in a very similar way to the rest of the population. The main objective of this project was to design, implement and evaluate two awareness interventions respectively tailored to reduce stigma and discrimination beliefs and attitudes towards persons with a mental health diagnosis among primary care (PC) and mental health (MH) professionals. These interventions were developed by Obertament, the Catalan alliance against stigma and discrimination in mental health. The TLC3 (Targeted, Local, Credible, Continuous Contact) methodology was adapted to the Catalan PC and MH professional contexts. Activists with lived experience of mental health diagnosis carried out awareness-raising interventions in PC and MH health centres. The efficacy of these interventions was evaluated using two prospective double-blind cluster-wait-list-randomized-controlled trial experimental designs. Stigmatizing beliefs and behaviours were measured with the Opening Minds Stigma Scale for Health Care Providers in primary care centres and with the Beliefs and Attitudes towards Mental Health Service users’ rights in mental health centres. Positive reductions in both PC and MH professionals’ stigmatising beliefs and attitudes were found in the 1-month follow-up, although a ‘rebound effect’ at the 3-month follow up was also detected. This emphasizes the importance of the continuity of the presence of anti-stigma activities and messages. Attrition rates where high, which can hamper the reliability of the results. Further follow-up studies should enquiry effects of long-term interventions aimed at reducing stigmatising beliefs and attitudes among primary care and mental health professionals.

Anthropogenic lead pollution is an environmental problem that threatens the quality of soils and waters and endangers living organisms in numerous surface and subsurface habitats. Lead coprecipitation on mineral surfaces through dissolution-recrystallization processes has long term effects on lead bioavailability. Gypsum and calcite are among the most abundant and reactive rock forming minerals present in numerous geological settings. In this work, we study the interaction of slightly acidic (pHi = 5.5) Pb-bearing aqueous solutions ([Pb]i = 1 mM and 10 mM) with crystals of gypsum and /or calcite under atmospheric conditions. This interaction results in a reduction of the concentration of lead in the liquid phase due to the precipitation of newly formed Pb-bearing solid phases. The extent of this Pb removal mainly depends on the nature of the primary mineral phase involved in the interaction. Thus, when gypsum is the only solid phase initially present in the system the Pb-bearing liquid-gypsum interaction results in Pb removals in the 98-99.8 % range, regardless of [Pb]i. In contrast, when the interaction takes place with calcite, Pb removal strongly depends on [Pb]i. It reaches 99% when [Pb]i = 1 mM while it is much more modest (⁓13%) when [Pb]i = 10 mM. Interestingly, Pb-removal is maximized for both [Pb]i (99.9 % for solutions with [Pb]i = 10 mM and 99.7% for solutions with [Pb]i = 1 mM) when Pb-polluted solutions simultaneously interact with gypsum and calcite crystals. Despite the large Pb removals found in most of the cases studied, the final Pb concentration ([Pb]f) in the liquid phase always is well above the maximum permitted in drinking water (0.1 ppm), with the minimum ([Pb]f = 0.7 ppm) being obtained for solutions with [Pb]i =1 mM after their interaction with mixtures of gypsum and calcite crystals. This result suggests that integrating the use of mixtures of gypsum-calcite crystals might help to develop more efficient strategies for in-situ decontaminating Pb-polluted waters through mineral coprecipitation processes.

Abstract: The purpose of this review is to summarize recent knowledge on the main processes that occur during wound healing, including the responses of various cell types and the molecular mechanisms involved. Particular attention is also dedicated to new therapies often involved in the resolution of wounds, whether acute or chronic. Awareness of these dynamics is important for the various professional figures who are confronted with these kinds of problem daily. However, the study of the healing mechanisms has yet to be defined in detail, in fact there are alterations of variously coordinated events which lead to a delayed resolution or, as in the case of keloids, to pathological states consisting in the excessive formation of scars with consequences yet to be seen. to define. Therefore, it is necessary to know the most feasible approaches and the most effective therapies.

Apoptosis, necroptosis, and autophagy are cellular mechanisms by which cells are programmed to die under a wide range of physiological and developmental stimuli. A multitude of protein mediators of programmed cell death have been identified and apoptosis, necroptosis, and autophagy signals have been found to utilize common pathways elucidating the proteins involved. This narrative review focuses on caspase-dependent and caspase-independent programmed cell death systems. Included studies of caspase-dependent programmed cell death include extrinsic pathway apoptotic mechanisms including phosphatidylserine (PS), FAS (APO-1/CD95), Tumor Necrosis Factor (TNF) Receptor type 1 (TNF-R1) and TNF-Related Apoptosis-Inducing Ligand (TRAIL) and intrinsic or mitochondrial pathway such as Cytochrome C, the Bcl-2 family of proteins and Smac/Diablo. The Bcl-2 family has apoptotic mediators Bcl-2-associated X protein (Bax) and Bcl-2 homologous antagonist/killer (Bak), Bcl-2-Interacting Protein BIM (Bim), Bcl-2 agonist of cell death (Bad), Bid, Bcl-2 adenovirus E1B 19kDa-interacting protein 1 NIP3 (Bnip3), BMF, HRK, Noxa and PUMA and anti-apoptotic proteins such as Bcl-2 itself, Mcl-1, Bcl-w, A1, and Bcl-XL. Moreover, caspase-independent programmed cell death pathways include the mitochondrial pathway with the protein mediators Apoptosis Inducing Factor (AIF), and Endonuclease G, the pathways Necroptosis, and Autophagy. Understanding programmed cell death from those reported in this review could shed substantial light on the processes of biological homeostasis. In addition, identifying specific proteins involved in these processes is mandatory to identify molecular biomarkers as well as therapeutic targets. This knowledge could provide the ability to modulate the programmed cell death response and could lead to new therapeutic interventions in a wide range of diseases.

(1) Background: Elite sport can increase vulnerability to developing mental health pathologies. The purpose of the study is to determine the frequency at which these behavioural disorders appear in elite footballers and evaluate their relationship with other addictions. (2) Methods: A cross-sectional study was conducted between November 2020 and January 2022 on 306 participants. The variables of gambling and gaming were studied. The different groups were compared using Chi-squared tests. Probabilities exceeding 95% (p-values &lt; 0.05) and residuals results greater than 2 or less than −2 were considered significant. (3) Results: There were significant differences between the two groups in terms of alcohol (p &lt; 0.001), tobacco (p &lt; 0.001), and cannabis (p &lt; 0.018) consumption. We also found differences between those who had a history of a nervous disease (p &lt; 0.015). 6.6% of the of football players had a probable diagnosis of gambling disorder compared to 1% in the general population (p &lt; 0.007). Among the pathological and non-pathological cases of gambling in the football population, significant differences were found between those with a salary of €900–1,500/month (p &lt; 0.033) or a history of a nervous pathology (p &lt; 0.001). (4) Conclusions: This study showed that professional football players were vulnerable to mental health pathologies related to gaming.

This research investigates the potential application of generative language models, especially ChatGPT, in aviation safety analysis as a means to enhance the efficiency of safety analyses and accelerate the time it takes to process incident reports. In particular, ChatGPT was leveraged to generate incident synopses from narratives, which were subsequently compared with ground truth synopses from the Aviation Safety Reporting System (ASRS) dataset. The comparison was facilitated by using embeddings from Large Language Models (LLMs), with aeroBERT demonstrating the highest similarity due to its aerospace-specific fine-tuning. A positive correlation was observed between synopsis length and their cosine similarity. In a subsequent phase, human factor issues involved in incidents as identified by ChatGPT were compared to human factor issues identified by safety analysts. A concurrence rate of 61% was found, with ChatGPT demonstrating a cautious approach towards attributing human factor issues. Finally, the model was used to attribute incidents to relevant parties. As no dedicated ground truth column existed for this task, a manual evaluation was conducted. ChatGPT attributed the majority of incidents to the Flight Crew, ATC, Ground Personnel, and Maintenance. This study opens new avenues for leveraging AI in aviation safety analysis.

The “NWCSAF High Resolution Winds (NWC/GEO-HRW)” software is developed by the EUMETSAT’s “Satellite Application Facility on support to Nowcasting and very short range forecasting (NWCSAF)”, inside its stand-alone software package for calculation of meteorological products with geostationary satellite data (NWC/GEO). The whole NWC/GEO software package can be obtained after registration at the NWCSAF Helpdesk, www.nwcsaf.org. It is easy to get, install and use. The code is easy to read and fully documented. And in the NWCSAF Helpdesk, users find support and help for its use. “NWCSAF High Resolution Winds” provides a detailed calculation of Atmospheric Motion Vectors (AMVs) and Trajectories, locally and in near real time, using as input NWP model data and geostationary satellite image data. The latest version of the software, v2018, is able to process MSG, Himawari-8/9, GOES-N and GOES-R satellite series images, so that AMVs and Trajectories can be calculated all throughout the planet Earth with the same algorithm and quality. In the “2014 and 2018 AMV Intercomparison Studies”, “NWCSAF High Resolution Winds” has shown to be one of the two best AMV algorithms for both MSG and Himawari-8/9 satellites. And the “Coordination Group for Meteorological Satellites (CGMS)” has recognized in its “2012 Meeting Report”: 1. “NWCSAF High Resolution Winds” fulfills the requirements to be a portable stand-alone AMV calculation software due to its easy installation and usability. 2. It has been successfully adapted by some CGMS members and serves as an important tool for development. It is modular, well documented, and well suited as stand-alone AMV software. 3. Although alternatives exist as portable stand-alone AMV calculation software, they are not as advanced in terms of documentation and do not have an existing Helpdesk. Considering this, a full description and validation of the “NWCSAF/High Resolution Winds” is shown here for the first time in a peer-reviewed paper. The procedure to obtain the software for operational meteorology and research is also explained.

The ankle is a complex joint with a high injury incidence. Rehabilitation Robotics applied to the ankle is a very active research field. We present cable-driven reconfigurable robot kinematics and statics. We studied how the tendons pull mid-foot bones around the talocrural and subtalar axes. Likewise, we propose a hybrid serial-parallel mechanism analogous to the ankle. Then, using screw theory, we synthesized a cable-driven robot with the human ankle in the closed-loop kinematics. We incorporate a draw-wire sensor to measure the axes’ pose and compute the product of exponentials. We reconfigure the cables to balance the tension and pressure forces using the axis projection on the base and platform planes. Likewise, we also computed the workspace to show that the reconfigurable design fits several sizes. The data used is from anthropometry and statistics. Finally, we validated the robot’s statics with MuJoCo for various cable length groups corresponding to the axes’ range of motion. We suggested a platform adjusting system and an alignment method. The design is lightweight, and the cable-driven robot has advantages over rigid parallel robots, such as Stewart platforms. We will use compliant actuators.

Synucleins are a family of small, soluble proteins mainly expressed in neural tissue and in certain tumors. Since their discovery, tens of thousands of scientific reports have been published about this family of proteins as they are associated to severe human diseases. Although the physiological function of these proteins still elusive, their relation with neurodegeneration and cancer was clearly described over the years. In this review, we summarize data connecting synucleins and cancer, going from the structural description of these molecules, to their involvement in tumor-related processes, and discuss the putative use of this proteins as cancer molecular biomarkers.

Neurodevelopmental disorders arise from genetic and/or from environmental factors and are characterized by different degrees of intellectual disability. The mechanisms that govern important processes sustaining learning and memory, which are severely affected in intellectual disability, have classically been thought to be exclusively under neuronal control. However, this vision has recently evolved into a more integrative conception, in which astroglia, rather than just acting as metabolic supply and structural anchoring for neurons, interact at distinct levels modulating neuronal communication and possibly also cognitive processes. Recently, genetic tools have made it possible to specifically manipulate astrocyte activity unraveling novel functions that involve astrocytes in memory function in the healthy brain. However, astrocyte manipulation has also underscored potential mechanisms by which dysfunctional astrocytes could contribute to memory deficits in several neurodevelopmental disorders revealing new pathogenic mechanisms in intellectual disability. Here, we review the current knowledge about astrocyte dysfunction that might contribute to learning and memory impairment in neurodevelopmental disorders, with special focus on Fragile X syndrome and Down syndrome.

Greenhouses are instrumental in the advancement of regions globally. The geometric arrangement of these structures plays a pivotal role in governing sunlight distribution, facilitating ventilation, and managing condensation. The roof's shape significantly affects energy efficiency and the accumulation of condensation water, which, when dripping onto crops, can induce diseases and diminish production. This study introduces a Matlab program designed for defining and analyzing greenhouse roof geometry, adaptable to both single-span and multi-span structures. Various roof shapes are examined, determining angles along their length to facilitate condensation droplet runoff. Furthermore, the greenhouse's energy efficiency is evaluated by analyzing diverse roof models, accounting for surface area and internal air volume. The results aim to aid in selecting the optimal greenhouse type based on climate and latitude. This study offers a valuable decision-making tool for the planning and design of agricultural structures, providing insights to enhance overall sustainability and performance in diverse environmental contexts.

Functional Data Analysis (FDA) is a relatively new field of statistics dealing with data expressed in the form of functions. FDA methodologies can be easily extended to the study of imaging data, an application proposed in Wang et al. (2020), where the authors settle the mathematical groundwork and properties of the proposed estimators. This methodology allows for the estimation of mean functions and simultaneous confidence corridors (SCC), also known as simultaneous confidence bands, for imaging data and for the difference between two groups of images. This is especially relevant for the field of medical imaging, as one of the most extended research setups consists on the comparison between two groups of images, a pathological set against a control set. FDA applied to medical imaging presents at least two advantages compared to previous methodologies: it avoids loss of information in complex data structures and avoids the multiple comparison problem arising from traditional pixel-to-pixel comparisons. Nonetheless, computing times for this technique have only been explored in reduced and simulated setups (Arias-López et al., 2021). In the present article, we apply this procedure to a practical case with data extracted from open neuroimaging databases and then measure computing times for the construction of Delaunay triangulations, and for the computation of mean function and SCC for one-group and two-group approaches. The results suggest that previous researcher has been too conservative in its parameter selection and that computing times for this methodology are reasonable, confirming that this method should be further studied and applied to the field of medical imaging.

The production and N-glycosylation of recombinant human butyrylcholinesterase (BChE), a model highly glycosylated therapeutic protein, in a transgenic rice cell suspension culture treated with kifunensine, a strong α-mannosidase I inhibitor, was studied in a 5 L bioreactor. A media exchange was performed at day 7 of cultivation by removing spent sugar rich media (NB+S) and adding fresh sugar free (NB-S) media to induce the rice α-amylase 3D (RAmy3D) promoter to produce rice recombinant human BChE (rrBChE). Using a 1.25X concentrated sugar-free medium together with an 80% reduced working volume during the media exchange lead to a total active rrBChE production level of 79 ± 2 µg (g FW)^-1 or 7.5 ± 0.4 mg L^-1 in the presence of kifunensine, which is 1.5-times higher than our previous bioreactor runs using normal sugar free medium with no kifunensine treatment. Importantly, the amount of secreted active rrBChE in culture medium was enhanced in the presence of kifunensine, comprising 44% of the total active rrBChE at day 5 post-induction. Coomassie stained SDS-PAGE gel and Western blot analyses reveal different electrophoretic migration of purified rrBChE bands with and without kifunensine treatment, which is attributed to different N-glycoforms. N-Glycosylation analysis shows substantial increase of oligomannose glycans (Man5/6/7/8) in rrBChE treated with kifunensine compared to controls. However, mass transfer limitation of kifunensine is likely the major reason for incomplete inhibition of α-mannosidase I in this bioreactor study.

Magnetic Particle Imaging (MPI) is a new imaging modality that sensitively and specifically detects superparamagnetic iron oxide nanoparticles (SPIONs). Many labs have been developing cellular magnetic resonance imaging (MRI) tools using both SPIONs and fluorine-19 (19F)-based contrast agents for numerous important applications, including tracking of immune and stem cells used for cellular therapies. SPION-based MRI cell tracking has very high sensitivity, but low specificity. SPIONs produce negative contrast in MRI, or signal voids. SPIO is not directly detected by MRI, but indirectly through its relaxation effects on protons, therefore, it is not possible to reliably quantify the local tissue concentration of SPION particles and cell number cannot be determined. 19F based cell tracking uses perfluorocarbons (PFC) to label cells. The number of 19F atoms can be directly measured from 19F MR images and related to cell number. 19F MRI has high specificity, but low sensitivity. MPI cell tracking displays great potential for overcoming the challenges of MRI-based cell tracking allowing for both high cellular sensitivity and high specificity and quantification of SPIO labeled cell number. In this paper we describe nanoparticle and MPI system factors that influence MPI sensitivity and resolution, quantification methods and give our perspective on testing and applying MPI for cell tracking.

In this work we aim to experimentally study the nucleation and growth of CaCO3 phases precipitated from supersaturated aqueous solutions in the presence of varying concentrations of sulphate oxyanion. The experiments were conducted under pH conditions close to neutral (7.6) and considering a wide range of initial (SO42-)/(CO32-) ratios (0 to ~ 68) in the aqueous solution. We paid special attention to the evolution of the precipitates during ageing within a time framework of 14 days. The mineralogy, morphology and composition of the precipitates were studied by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy and EDX microanalysis. The concentration of sulphate ions in the reacted aqueous solution was study by ICPs. The experimental results show that the mineral composition of the precipitate recovered in each run varied with the (SO42-)/(CO32-) ratio in the parental solution, which influences the mineral evolution of the precipitates during ageing. We observe that high concentrations of sulphate in the aqueous solution stabilize the vaterite precipitates and inhibit calcite formation. Furthermore, aragonite never precipitates directly form the solution and it is only formed via a dissolution-precipitation process in solutions with high (SO42-)/(CO32-) ratio after long reaction times. Finally, gypsum only precipitates after long ageing in those aqueous solutions with the highest concentration of sulphate. The reaction pathways during ageing, the morphology of the calcite crystals and the composition of vaterite and calcite are discussed considering both, kinetic and thermodynamic factors. These results show a considerably more complex behavior of the system than that observed in experiments conducted under higher pHs and supersaturation levels and lower (SO42-)/(CO32-) ratios in the aqueous phase.

Background: Diets based on meat products are not recommended in the case of ulcerative colitis (UC). However, some foods, as those containing high oleic acid and a low omega-6/omega-3 ratio show anti-inflammatory properties. The objective here is to test if some traditional cured meat products, as acorn-fed ham (high levels of oleic acid), may be useful for controlling inflammatory diseases as UC in animal models. Methods: 3 rat cohorts have been used: vegetable rat feed, control ham and acorn-fed ham (a traditional ham where high oleic acid concentration from acorns is storage in the muscle fat). UC was induced with DSS in drinking water ad libitum for one week. Short-chain fatty acids (SCFAs) and 16S rRNA from bacterial populations were analyzed in cecum samples. Colon samples were analyzed for histological parameters (inflammatory cell density, mucosa damages, myeloperoxidase). Results: In the acorn-fed ham cohort, a protective effect was observed with respect to UC disease activity index, inflammatory cells density, colon mucosa alterations, myeloperoxidase levels, blood total antioxidant capacity and lower levels of pro-inflammatory cytokines, in comparison with feed cohort. Both ham diets caused a reduction in Firmicutes and an increase in Actinobacteria, Bacteroidetes and Proteobacteria in comparison with rat feed diet. Also, acorn-fed ham diet induced changes in gut microbiota composition, with pronounced enrichments in anti-inflammatory bacterial genera such as Alistipes, Bacteroides, Blautia, Butyricimonas and Parabacteroides. Conclusions: In the acorn-fed ham cohort, as a result of the dietary intake of oleic acid and low intake of omega-6 fatty acids, a strong preventive effect against UC symptoms was observed, indicating a valuable effect of this traditional Mediterranean cured meat product.

Many drastic actions are taken by cocaine users for the sake of experiencing high dopamine levels, which depends on iron for its synthesis. Dopamine depletion and iron deficiency are also involved in the symptoms of restless leg syndrome (RLS). The intersecting biochemical pathways of cocaine use, iron deficiency, and RLS have not been adequately investigated. This case report reveals the successful treatment of a patient with these conditions. A 63-year-old male with a history of cocaine use disorder, insomnia, and RLS sought emergency care for suicidality. Upon admission, he was also found to be iron-deficient. He revealed that his RLS worsened when he attempted to abstain from cocaine. He also used alcohol to sustain the effects of cocaine when the cost of cocaine was too high. During hospitalization, his mood, cravings, and RLS were resolved with adjunctive iron supplementation as well as 300 mg of Wellbutrin. If iron-deficient, replenishment of adequate dopaminergic receptor density and function via supplementation may play an essential role in the prevention of cocaine use and cessation of cocaine withdrawal. Further research is warranted to validate these findings and understand the implications of iron supplementation in addiction medicine.

Requirements are predominantly written in Natural Language (NL), which makes them accessible to stakeholders with varying degrees of experience, as compared to a model-based language which requires special training. However, despite its benefits, NL can introduce ambiguities and inconsistencies in requirements, which may eventually result in system quality degradation and system failure altogether. The system complexity that characterizes current systems warrants an integrated and comprehensive approach to system design and development. This need has brought about a paradigm shift towards Model-Based Systems Engineering (MBSE) approaches to system design and a departure from traditional document-centric methods. While, MBSE shows great promise, the ambiguities and inconsistencies present in NL requirements hinder their conversion to models directly. The field of Natural Language Processing (NLP) has demonstrated great potential in facilitating the conversion of NL requirements into a semi-machine-readable format that enables their standardization and use in a model-based environment. A first step towards standardizing requirements consists of classifying them according to the ``type'' (design, functional, performance, etc.) they represent. To that end, a language model capable of classifying requirements needs to be fine-tuned on labeled aerospace requirements. This paper presents the development of an annotated aerospace requirements corpus and its use to fine-tune BERT$_\text{BASE-UNCASED}$ to obtain aeroBERT-Classifier: a new language model for classifying aerospace requirements into design, functional, or performance requirements. A comparison between aeroBERT-Classifier and bart-large-mnli (zero-shot text classification) showcased the superior performance of aeroBERT-Classifier on classifying aerospace requirements despite being fine-tuned on a small labeled dataset.

The cooperation between humans and robots is becoming increasingly important in our society. Consequently, there is a growing interest in the development of models that can enhance the interaction between humans and robots. A key challenge in the Human-Robot Interaction (HRI) field is to provide robots with cognitive and affective capabilities, developing architectures that let them establish empathetic relationships with users. Several models have been proposed in recent years to solve this open-challenge. This work provides a survey of the most relevant attempts/works. In details, it offers an overview of the architectures present in literature focusing on three specific aspects of HRI: the development of adaptive behavioural models, the design of cognitive architectures, and the ability to establish empathy with the user. The research was conducted within two databases: Scopus and Web of Science. Accurate exclusion criteria were applied to screen the 1007 articles found (at the end 30 articles were selected). For each work, an evaluation of the model is made. Pros and cons of each work are detailed by analysing the aspects that can be improved so that an enjoyable interaction between robots and users can be established.

This study presents a novel method based in ray tracing for analyzing wave propagation in composites, specifically tailored for Structural Health Monitoring applications. The method offers distinct advantages over the commonly used Finite Element Method mainly in computational resource utilization, that has become a limiting factor for this kind of analyses. The ray tracing method is evaluated against a number of example cases representing structural details such as thickness changes, stringers or simulated damages and it highlights the significance of ray tracing to study wave propagation under these conditions and how it can serve as a valuable tool for structural health monitoring.