This paper presents a complete control strategy of the active return-to-center (RTC) control for electric power steering (EPS) systems. We first establish the mathematical model of the EPS system and analyze the source and influence of the self-aligning torque (SAT). Second, based on the feedback signals of steering column torque and steering wheel angle, we give the trigger conditions of a state switch between the steering assist state and the RTC state. In order to avoid the sudden change of the output torque for the driving motor when the state switches frequently between the steering assist state and the RTC state, we design an undisturbed state switching logic algorithm. This state switching logic algorithm ensures that the output value of the RTC controller is set to an initial value and increases in given steps up to a maximum value after entering the RTC state, and the output value of the RTC controller will reduce in given steps down to zero when exiting the RTC state. This therefore ensures smooth switch control between the two states and improves the driver’s steering feeling. Third, we design the RTC controller, which depends upon the feedback signals of the steering wheel angle and the angular velocity. In addition, the controller increases the auxiliary control function of the RTC torque based on vehicle speed. The experimental results show that the active RTC control method does not affect the basic assist characteristics, which effectively reduces the residual angle of the steering wheel at low vehicle speed and improves the RTC performance of the vehicle.

This paper considers the direction of arrival (DOA) estimation problem of phase ambiguity for unfolded coprime linear array (UCLA). The existing most common stacking subarray-based method can tackle the phase ambiguity problem. However, the method is not always true. For a given DOA, it has its corresponding steering vector, but if there are two DOAs which have the same steering vectors with the given DOA for different subarrays, the phase ambiguity problem still arises. A modified method, which defines a decision variable and uses the classic beamforming technique to estimate the DOAs is proposed. However, this method needs additional algorithm to distinguish the true DOAs besides multiple signal classification (MUSIC) spectrum. And sometimes this method is not reliable if the decision variable is not chosen appropriately. Therefore, based on the UCLA, we reconstruct the array to design an improved UCLA called IUCLA. With moving the reference element, the linear relationship among the directional vectors can be broken. In this way, we can directly utilize the MUSIC algorithm to estimate with no additional algorithm. The proposed method can solve the phase ambiguity problem and it does not demand other technique to decrease the complexity. Moreover, the Cramer-Rao Bound (CRB), as the lower bound of the unbiased estimation, is provided and numerical simulations are given to demonstrate the effectiveness and superiority of the proposed method.

The prediction of system degradation is very important as it serves as an important basis for the formulation of condition-based maintenance strategies. An effective health indicator (HI) plays a key role in the prediction of system degradation as it enables vital information for critical tasks ranging from fault diagnosis to remaining useful life prediction. To address this issue, a method for monitoring data fusion and health indicator construction based on autoencoder (AE) and long short-term memory (LSTM) network is proposed to improve the predictability and effectiveness of health indicator in this study. Firstly, an unsupervised method and overall framework for HI construction is built based on deep autoencoder and LSTM neural network. The neural network is trained fully based on the normal operating monitoring data and then the construction error of the AE model is adopted as the health indicator of the system. Secondly, we propose related machine learning techniques for monitoring data processing to overcome the issue of data fusion, like mutual information for sensor selection and t-distributed stochastic neighbor embedding (T-SNE) for operating condition identification, etc. Thirdly, in order to verify the performance of the proposed method, experiments are conducted based on CMAPSS dataset and results are compared with algorithms of principal component analysis (PCA) and vanilla autoencoder model. Result shows that LSTM-AE model outperforms the PCA and Vanilla-AE model in metrics of monotonicity, trendability, prognosability and fitness. Fourthly, in order to analyze the impact of the time step of the LSMT-AE model on HI construction, we construct and analyze the system HI curve under different time steps of 5, 10, 15, 20, and 25 cycles. Finally, the results demonstrate that the proposed method for HI construction can effectively characterize the health state of system, which is helpful for further failure prognostics and converting the scheduled maintenance into condition-based maintenance.

Severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2) continues to be a global threat due to its ability to evolve and generate new subvariants, leading to new waves of infection. Additionally, other coronaviruses like Middle East respiratory syndrome coronavirus (MERS-CoV, formerly known as hCoV-EMC) which first emerged in 2012, persists and continues to present a threat of severe illness to humans. The continued identification of novel coronaviruses, coupled with the potential for genetic recombination between different strains, raises the possibility of new coronavirus clades of global concern emerging. As a result, there is a pressing need for pan-CoV therapeutic drugs and vaccines. After extensive optimization of an HCV protease inhibitor screening hit, a novel 3CLPro inhibitor (MK-7845) was discovered and subsequently profiled. MK-7845 exhibited nanomolar in vitro potency with broad spectrum activity against a panel of clinical SARS-CoV-2 subvariants and MERS-CoV. Furthermore, when administered orally, MK-7845 demonstrated a notable reduction of viral burdens by >6 log orders in the lungs of transgenic mice infected with SARS-CoV-2 (K18-hACE2 mice) and MERS-CoV (K18-hDDP4 mice).

Simple Summary: 200 words Will biology, including humans, benefit or harm from new developments in information such as artificial intelligence (AI). First, are biology and information different? Life is an ordered form that can reproduce, maybe with variation; and any ordered arrangement, biological or not, potentially contains information. There have been ordered forms since earth was just a ball of chemicals, and some such chemicals can reproduce. So biological and non-biological information might be components of a unified process, ‘PanEvolution’ or ‘Pan-Evo’, based on the same four operations for living or non-living entities - Innovation; Transmission and replication; Adaptation; and Movement. This can produce separate groups called ‘species’. In a current Panspeciation event, information held in biology - especially our brains - is moving into its own environment. Harm to biology might be minimal if humans and AI both behave intelligently, because vastly different environments are optimal for humans and machines containing AI. This would be the first speciation-like event involving humans for millennia, but will not be particularly hostile to humans, if humans learn how to evaluate information and cooperate, to minimize the effect of both human stupidity and artificial simulated stupidity (ASS – a failure of AI). Abstract: 200 words Many people wonder whether biology, including humans, will benefit or harm from new developments in information such as artificial intelligence (AI). Biological and non-biological information might be components of a unified process, ‘Pan-Evolution’ or ‘Pan-Evo’, based on four basic operations – Innovation, Transmission, Adaptation, and Movement. Pan-Evo contains many types of variable objects, from molecules to ecosystems. Biological innovation includes mutations and behavioural changes; non-biological innovation includes naturally-occuring physical innovations, and innovation in software. Replication is commonplace in and outside biology, including autocatalytic chemicals, and autonomous software replication. Adaptation includes biological selection, autocatalytic chemicals and ‘evolutionary programming’ used in AI. Extension of biological speciation to non-biological information, creates a concept called ‘Panspeciation’. Panevolution might benefit or harm biology, but harm might be minimal if AI and the humans behave intelligently, because humans, and the machines in which AI resides, might split to the vastly different environments that suit them. That is a possible example of panspeciation, and would be the first speciation event involving humans for thousands of years. This event will not be particularly hostile to humans, if humans learn to evaluate information and cooperate better, to minimize both human stupidity and artificial simulated stupidity (ASS – a failure of AI).

As the Universe is dominated by of baryons, there must have been a process in early Universe creating such a asymmetry via baryon number violation. However, until recently all the confirmed experimental data indicate that lepton and baryon number are conserved in agreement with Standard Model of quarks and leptons. This paper proposes an alternative path of baryogenesis. Once the over abundant magnetic monopoles predicted by grand unification emerged at universe temperature of $10^{16}$ GeV, then their annihilation should first give rise to photons driving the expansion of the early universe. As the universe temperature dropped to the desert scale of around 10 EeV, departure from thermal equilibrium occurred. Thus the annihilation produced photons give rise to electron-positron pairs, which collide with remnant magnetic monopoles and antimonopoles. The resultant unstable intermediate X and antiX particle become asymmetric, and thereby leading to baryon asymmetry. The excess of antimonopoles corresponding to ten times of mass comparing with that of baryons provides a natural candidate for dark matter. The physics of such a desert regime baryogenesis can be simply characterized by three parameters. The collision predicts a ratio of particle and anti-particle equivalent to that of ultra-high-energy neutrino to their anti-particle, which can be tested by future observations, e.g., the constructing IceCube-Gen2.

Over abundance of magnetic monopoles predicted by the Grand Unification Theories is inconsistence with current astronomical observation. The inflationary hypotheses with a vacuum energy deriving the exponential expansion can explain the two long-standing problems, flatness and horizon of the universe; and somehow suppress the abundance of monopoles. However, the dynamical scalar field has considerable uncertainties, which even leads to inflationary models separating from particle physics. This paper makes a small change, the early universe undergoes free expansion rather than an adiabatic one widely adopted, In such a case, the annihilation of abundant magnetic monopoles is just required in driving the inflation, so that the three long-term problems are automatically solved. On the other hand, the relic mass of failed annihilation of monopoles is responsible for the dark matter at present epoch. And ongoing annihilation on stars and compact objects corresponds to the dark energy. As monopole relics may exist in the form of monopole anti-monopole pairs, a new strategy of direct search is proposed.

There is an observed general low performance of Ethiopian Sport Governing Bodies (SGBs) in service delivery. Evidence shows that the trend can be corrected with proper understanding and insight into the process of organisational and management factors of these SGBs. This study aimed to investigate the contribution of organisational and management factors on effective sport service delivery in SGBs. For this study, a cross-sectional research design was employed. Purposive sampling was used to choose 350 samples. Pearson Product Moment Correlation Coefficient and multiple regression were used to analyse the data at the 0.05 significant level. The findings confirmed that organisational and management factor variables had a significant positive relationship with sport service delivery (organisational structure (r=0.515), organisational capabilities (r=0.701), communication (r=0.549), management practice (r=0.571), materials & resources (r=0.527) and stakeholders satisfaction (r=0.742). In addition, Management factors were found to be significant contributors for predicting effective sport service delivery (F(3, 329)= 165.868, R2= 0.612). Furthermore, organisational factors had a joint significant contribution to effective sport service delivery (F(3, 329) = 148.743, R2= 0.576). In addition, organisational and management factor variables jointly best predicted effective sport service delivery in Ethiopian SGBs (F(6, 326) =130.81, R2= 0.707). Therefore, this study suggests organisational and management factor variables can be used to predict effective sport service delivery.

One method of estimating the evaporation rate (ER) is to use a variety of evaporation pans, such as the Class A standard evaporation pan (CASEP) and the Colorado Sanken standard evaporation pan (CSSEP). In this study, the rate of evaporation of CASEP and CSSEP have been investigated and compared with each other. This study was conducted in Semnan, Iran. CSSEP was used as a test pan, which was performed in an open space around the Faculty of Civil Engineering, Semnan University. Evaporation was recorded daily for 123 days. The evaporation of the CASEP pan was obtained from the synoptic station of Semnan, which is located at a distance of 2.39 km from the test site. Meteorological data were also obtained from the synoptic station of Semnan and compared with experimental evaporation data. The results of this study showed that the daily ER from CASEP and CSSEP in the tested time periods were not significantly different. Based on the Klomogorov-Sminrov method, the best statistical distributions for CASEP and CSSEP were calculated as Error and Gamma, respectively. The coefficient of determination (R 2 ) between the two pans was estimated to be about 93%. Also, by examining the ER with other meteorological data, it was observed that the ER has the highest correlation with the average daily air temperature.

To investigate the effect of Polyvinylpyrrolidone (PVP) addition and consequently porosity, two different sets of membranes are manufactured, since PVP is a widely used poring agent which has an impact on the mechanical properties of the membrane material. The first set (PAN 1) includes PAN and the necessary solvent while the second set (PAN 2) is made of PAN and PVP. These membranes are put through several characterisation processes including tensile testing. The obtained data are used to model the static behaviour of the membranes with different geometries, but similar loading and boundary conditions that represent their operating conditions. This modelling process is undertaken by using finite element method. The main idea is to investigate how geometry affects the load-carrying capacity of the membranes. Alongside membrane modelling, their materials are modelled with representative elements with hexagonal and rectangular pore arrays (RE) to understand the impact of porosity on the mechanical properties. Exploring the results, the best geometry is found as the elliptic membrane with the aspect ratio 4 and the better RE as the hexagonal array which can predict the elastic properties with an approximate error of 12%.

During the COVID-19 pandemic, antibody-based vaccines targeting the SARS-CoV-2 spike glycoprotein were the key focus for development because neutralizing antibodies were associated with protection against the SARS-CoV-2 infection in pre-clinical models and human trials. While deploying these spike-based vaccines saved millions of lives worldwide, it has become clear that the immunological mechanisms of protection against severe disease are multifaceted and involve non-neutralizing antibody components. Here, we describe a novel pan-sarbecovirus T-cell vaccine, ChAdOx1.COVconsv12, designed to complement and broaden the protection of spike vaccines. The vaccine immunogen COVconsv12 employs the two regions in the viral proteome most conserved among sarbecoviruses delivered by replication-deficient vector ChAdOx1. It focuses T cells towards epitopes shared among sarbecoviruses including evolving SARS-CoV-2 variants. Here, we show that ChAdOx1.COVconsv12 induced broad T-cell responses in the BALB/c and C57BL/6 mice. In the Syrian hamster challenge model, ChAdOx1.COVconsv12 alone did not protect against the SARS-CoV-2 infection, but when co-administered with 1/50th of the ChAdOx1 nCoV-19 spike vaccine protective dose, faster recovery and lower oral swab viral load were observed. Induction of CD8+ T cells may decrease COVID-19 severity and extend the T-cell response coverage of variants to match the known (and as yet unknown) members of the beta-coronavirus family.

Root crops grow in the soil deeply and bond with soil closely, which results in that the process of the separation between soil and root becomes the most difficult during the harvesting processes. In order to harvest root crops efficiently, the mechanical harvesting has become the main developing trend. However, high power and high damage rate are still occurred when mechanical harvester gets in touch with the roots. In this paper, we review the research of the development and evaluation of the mechanical harvesting of root crops and its performance optimization on the past years. The process of soil separation mainly consists in the initial separation between root and the ground and further separation between root and adhered soil. In general, the soil-cutting operation in the initial separation and the sieving mechanism in the further separation require high draught and power. And the dramatic friction, impact, pressure and so on, which happen in the components and soil-roots, are the key reasons to lead to root damage. The optimization of harvesting methods and parameters, including the digging shovel shape, working conditions, vibration, and screening way, is more significant in improving the harvesting performance. But there are still some limitations in the research and application of the mechanical harvester for root crops. Future research is suggested to focus on the development of the soil break-up when the digging shovel cutting soil, the insight into the interaction between soil and roots by different external compression loads, and the long-term studies to verify the high-efficiency and low-damage performances of mechanical harvester in practical application.

Iron overnutrition has been implicated with higher risk of developing metabolic and cardiovascular diseases, including metabolic syndrome (MetS), while iron deficiency anemia exacerbates many underlying chronic conditions. Hemoglobin (Hb) concentration in the blood, which reflects a major functional iron (i.e., heme iron) in the body, may serve as a surrogate of iron nutrition status. We conducted sex-specific observational association studies where we carefully titrated the association between Hb deciles and MetS and its components among the Taiwanese Han Chinese (HC) from the Taiwan Biobank and Europeans of White ancestry from the UK Biobank, representing two large ethnicities. Our data show that at higher-than-normal levels of Hb, increasing deciles of Hb concentration were significantly associated with MetS across all sex subgroups in both ethnicities, with the highest deciles resulting in up to three times greater risks than the reference group [Taiwanese HC: OR=3.17 (95% CI, 2.75-3.67) for Hb >16.5 g/dL in men, OR=3.11 (2.78-3.47) for Hb >14.5 g/dL in women; European Whites: OR=1.89 (1.80-1.98) for Hb >16.24 g/dL in men, OR=2.35 (2.24-2.47) for Hb >14.68 g/dL in women]. The association between stronger risks and increasing Hb deciles was similarly observed with all metabolic components except diabetes. Here we found that both the highest Hb decile groups and contrarily the lowest ones, with respect to the reference, were associated with higher odds of diabetes in both ethnic groups [e.g., Taiwanese HC men: OR=1.64 (1.33-2.02) for Hb >16.5 g/dL, OR=1.71 (1.39-2.10) for Hb <13.5 g/dL; European Whites women: OR=1.39 (1.26-1.45) for Hb >14.68 g/dL, OR=1.81 (1.63-2.01) for Hb <12.39 g/dL]. These findings confirm that elevated Hb concentrations, a potential indicator of iron overnutrition, may play a role in the pathophysiology of MetS and metabolic components.

A method for estimating river water surface elevation (WSE) from Landsat imagery using the river inundation area - water surface elevation (RIA-WSE) rating curve constructed from the U.S. Geological Survey Topobathymetric Elevation Model (TEM) data was developed and tested at six gauging stations along the upper Mississippi River. The Otsu's automatic threshold selection algorithm was employed for the image classification and estimation of inundation areas within each pre-defined polygon around each gauging station. In addition to the commonly used green-band based water indices, Landsat 8 and 9 OLI's ultra-blue, blue, and red band-based water indices were also tested in this study, which resulted in twenty different water indices: NDWIv (Normalized Difference Water Index), MNDWI1v and MNDWI2v (Modified Normalized Difference Water Index), AWEIsv (Automatic Water Extraction Index with shadow), and AWEInsv (AWEI without shadow), where v represents the visible light band used in the water index. At each station, about 60-80 Landsat 8 or 9 images during 2013-2023 were used for assessing the performances of the twenty water indices through comparing the estimated WSEs with the measured WSEs. Results showed that the ultra-blue or red band-based AWEIs yielded the most accurate estimations of WSEs among the twenty tested water indices.

Inflationary model provides a conceptual explanation of the horizon problem, the flatness problem and may also suppress the over abundant magnetic monopoles predicted by Grand Unified Theories. Although various inflationary models have been proposed since 1981, difficulties like fine tuning is not only unsolved but also becomes severer in confrontation with data of Planck Satellite. This paper proposes an alternative model of inflation: the spontaneous symmetry breaking phase transition at early universe is only responsible for the production of magnetic monopoles expected by Grand Unified Theories; it is the subsequent energy release of monopole annihilation that drives the inflation. As a result, the early universe underwent a free expansion with a heat source originating in the annihilation, which expects a smooth, plateau-like potential consistent with the observational data. Beside interpreting a number of long standing inflationary problems, the new scenario predicts a significant increase of entropy during the inflation, and tends to produce large scale structures exceed scale of 300 million light-years correlated with a CMB smoothen and flatten by a simple dynamical mechanism.

In 1935 Einstein, Podolsky, and Rosen (EPR) studied general entangled states in the two photon experiment and pointed out the contradiction between local realism and the completeness of quantum mechanism. Most of the EPR experiments in recent years are based on the detection of polarization correlations of optical photons between spatially separated photon channels, some of which are split and directed to two spatially separated Michelson interferometers. Later, the two arms of Michelson interferometers are replaced by dual-channel Fabry-Perot (F-P) interferometry enabling precise analysis of the energy-time entanglement between a pair of photons. On the other hand, F-P type detectors on gravitational radiation have caught dozens of gravitational wave (GW) events successfully. This paper proposes a combined experiment of EPR and GW, exhibiting whether the coincident rate of EPR is modulated by GW induced change of cavity length or not. Such an experiment could test the coupling of quantum mechanics and general relativity for the first time, and be a useful tool to explore the nature of quantum gravity.

Two major sample configurations are adopted in all the instruments for fabric hand measurement, flat sample as in KES and FAST types machines, and wrinkled sample as in PhabrOmeter. This paper compares the two sample types to examine which one if any offers a better coverage and reflection of the fabric sensory attributes. Fabrics have unique behaviors of drape, wrinkle and tactile sense which are entirely due to the simultaneous occurrence of both in-plane membrane deformation and out-of-plane bending deformation in multiple curvature. Such singular deformation mode cannot be detected by any machines using flat sample, whereas during a PhabrOmeter test, the fabric sample genuinely produces drape, wrinkle in addition to other related deformations. This paper then introduced the theoretical research pertaining to the measurement. Then a split sample experiment is conducted to demonstrate the importance of the internal connections in fabric during drape and wrinkle processes. As such fabric interconnection will be barely disclosed during tests using flat samples, another important advantage of PhabrOmeter is hence clearly shown.

The diffusion coefficient--a measure of dissipation, and the entropy--a measure of fluctuation are found to be intimately correlated in many physical systems. Unlike the fluctuation dissipation theorem in linear response theory, the correlation is often strongly non-linear. To understand this complex dependence, we consider the classical Brownian diffusion in this work. Under certain rational assumption, i.e. in the bi-component fluid mixture, the mass of the Brownian particle $M$ is far greater than that of the bath molecule $m$, we can adopt the weakly couple limit. Only considering the first-order approximation of the mass ratio $m/M$, we obtain a linear motion equation in the reference frame of the observer as a Brownian particle. Based on this equivalent equation, we get the Hamiltonian at equilibrium. Finally, using canonical ensemble method, we define a new entropy that is similar to the Kolmogorov-Sinai entropy. Further, we present an analytic expression of the relationship between the diffusion coefficient $D$ and the entropy $S$ in the thermal equilibrium, that is to say, $D =\frac{\hbar}{eM} \exp{[S/(k_Bd)]}$, where $d$ is the dimension of the space, $k_B$ the Boltzmann constant, $\hbar $ the reduced Planck constant and $e$ the Euler number. This kind of scaling relation has been well-known and well-tested since the similar one for single component is firstly derived by Rosenfeld with the expansion of volume ratio.

In order to achieve its carbon peak and neutrality targets, a high proportion of distributed power sources are connected to the distribution network in China, which greatly increases the risk of distribution network operation. Aiming at the above problems, this paper proposes an active distribution network risk planning model based on multi-source data from carbon capture and power internet of things, and conducts exceeding testing of distribution network based on the stochastic load flow algorithm with semi-invariant and level expansion, calculates the semi-invariant of each order of node state vectors and branch current vectors, and then utilizes the Gram-Charlier level expansion to obtain the exceeding probability density function and probability distribution function of the node voltages and line powers of the distribution network. The probability density function and probability distribution function of the exceeding are obtained using the Gram-Charlier series expansion. Combined with multi-source data, the active distribution network with integrated energy system considering carbon capture is modeled. According to the risk scenario of the distribution network, the nonconvex constraints in the model are simplified by the second-order cone relaxation, and the optimal planning scheme of the distribution network is solved by combining the gurobi solver with the risk index as the first-level objective and the economic benefit as the second-level objective. The simulation results of a coupled network consisting of a 39-node distribution network and an 11-node transportation network verify the effectiveness of the proposed model.

This paper extends the application of the ROTASE model for the formation of spiral arms of disc galaxies, questions and confusions from readers about this model are addressed. The optical trail effect behind the spiral arm rotation is the natural consequence of the model. The morphologies of ring-galaxies are classified into four categories: type I: single ring; type II: 8-shaped double ring; type III: 8-shaped double ring wrapped by a larger outer ring; type IV: single ring without spiral and bar. All four types of ring galaxies can be described by the ROTASE model. The ROTASE model predicts that the false impression of spiral arm rotating ahead of the galactic bar in the galaxy MCG+00-04-051 will change with time, it will look like a normal galaxy with about 30° to 40° bar rotation in the future and the galactic bar ends will look like rotating ahead of the spiral arms with further 10 ° to 15 °bar rotation. The formation of one arm galaxies is due to X-matter at one side of supermassive black hole is much stronger than other side. More evidence is found to support the explanation of the formation and the evolution of the Hoag’s object. The possible evolution of spiral pattern of galaxies is illustrated by UGC 6093. The winding of the Milky Way could be tighter in the future based on the ROTASE model.

We suggest a deep learning based sensor signal processing method to remove chemical, kinetic and electrical artifacts from ion selective electrodes’ measured values. An ISE is used to investigate the concentration of a specific ion from aqueous solution, by measuring the Nernst potential along the glass membrane. However, application of ISE on a mixture of multiple ion has some problem. First problem is a chemical artifact which is called ion interference effect. Electrically charged particles interact with each other and flows through the glass membrane of different ISEs. Second problem is the kinetic artifact caused by the movement of the liquid. Water molecules collide with the glass membrane causing abnormal peak values of voltage. The last artifact is the interference of ISEs. When multiple ISEs are dipped into same solution, one electrode’s signal emission interference voltage measurement of other electrodes. Therefore, an ISE is recommended to be applied on single-ion solution, without any other sensors applied at the same time. Deep learning approach can remove both 3 artifacts at the same time. The proposed method used 5 layers of artificial neural networks to regress correct signal to remove complex artifacts with one-shot calculation. Its MAPE was less than 1.8% and R² of regression was 0.997. A randomly chosen value of AI-processed data has MAPE less than 5% (p-value 0.016).

Train fault detection primarily relies on the comparative analysis of collected images with standard reference images, making the accurate identification of the collected image types crucial for effective fault detection. Most current systems achieve indirect classification of carriage images by using Automatic Equipment Identification (AEI) devices to recognize carriage identification number information while capturing the carriage images. However, damaged RF tags or blurred characters can hinder these devices, obstructing further train fault analyses. The unique features of carriage linear array images, such as high resolution, extreme aspect ratios, and local non-linear distortions, pose significant challenges to recognition algorithms. This paper proposes a method specifically designed to recognize these types of images. First, we implement an object detection algorithm to locate the positions of key components in carriage linear array images. By leveraging the spatial layout mapping between these key components and the carriage type classification, we simplify the complex image recognition problem into a sparse point set alignment task. To ensure effective registration despite local distortions in the linear array images, we propose a weighted radial basis function. To address the issues of unknown matching relationships and quantity mismatches during point set alignment, the proposed objective function is designed to maximize the similarity between Gaussian mixtures of point sets, thereby determining the RBF weights. Extensive experiments have demonstrated that our algorithm achieves 100% recognition accuracy under local nonlinear scale distortions of less than 15%. The algorithm remains effective even in the presence of some false positives or missed detections in key component object detection results. It can accurately identify the target category from 79 image categories within 24 milliseconds on an i7 CPU without GPU support. It is of great significance to reduce system cost and promote automatic exterior fault detection for train rolling stock.

Soybean is one of the world’s most economically significant crops and is widely utilized as an essential source of vegetable protein and edible oil. Cultivated soybean is domesticated from its annual counterpart, wild soybean, which is considered valuable germplasm for soybean breeding. However, wild soybean accessions generally produce seeds with impermeable coats, a trait known as hard seededness (HS), which is beneficial for long-term seed survival but is undesirable for the uniform water absorption and germination of seeds, thus limiting the utilization of wild soybeans in breeding. However, moderate HS can isolate the embryo from the surrounding environment and is thus beneficial for long-term seed storage and germplasm preservation. The HS trait is primarily associated with the structure and chemical composition of the seed coat. However, its development is also influenced by various environmental conditions, such as water and temperature. Genetic analysis has revealed that HS of soybean is a complex quantitative trait controlled by multiple genes or minor quantitative trait loci (QTL), with many QTLs and several causal genes currently identified. Investigating the physiological and molecular mechanisms underlying this trait is crucial for soybean breeding, production, and food processing. For this article, the literature was reviewed and condensed to create a well-rounded picture of the current understanding of internal and external factors, QTLs, causal genes, and the regulatory mechanisms related to the HS of soybean, with the aim of providing reference for future research and utilization of this trait.

Common prosperity is the core goal of rural revitalization, and sustainable growth of farmers' income is an inevitable requirement. This study uses CLDS2016-2020 village and family level questionnaire data to reveal how the degree of village organization affects the sustainable growth of farmers' income, thus providing reference and decision-making for the local government to promote the increase of farmers' income and narrow the gap from the village level. The results show that the degree of village organization can significantly affect farmers' income, and the analysis results of the degree of formal organization are consistent with them. Specifically, for every 1% increase in the degree of village organization, the per capita household income will increase by 32.4%, among which the wage income will increase by 22.6%, the operational income will increase by 5%, the property income will increase by 0.8%, and the transfer income will increase by 4.2%. The estimation results through instrumental variables are consistent, and the results are robust. At the same time, improving the degree of village organization can also significantly increase the proportion of farmers' non-agricultural income and narrow the income gap among farmers. On the impact of heterogeneity, it is found that the geographical distance between villages and county and township governments, as well as the political identity and education level of farmers will affect the role of the degree of organization. The results of mechanism analysis show that improving the degree of village organization is mainly through promoting the circulation of agricultural land, socialized service of agricultural machinery and industrial and commercial capital to the countryside to increase farmers' income. The research revealed that the modernization of rural governance should be accelerated, and the degree of village organization should be improved, especially the degree of formal organization, so as to build a benign trust and cooperation relationship between the two village committees and the villagers, and implement policies and measures to improve the income of farmers according to local conditions. At the same time, strengthen the publicity and education in party member to improve the proportion of rural party member and the education level of farmers.

FV (finger vein) identification is a biometric identification technology that extracts the features of FV images for identity authentication. To address the limitations of CNN-based FV identification, particularly the challenge of small receptive fields and difficulty in capturing long-range dependencies, an FV identification method Let-Net(Large kernel and attention mechanism Network) was introduced, which combines local and global information. Firstly, Let-Net employs large kernels to broaden the receptive field and incorporates depthwise convolution with residual connections to reduce parameter count. Secondly, Let-Net integrates an attention mechanism to enhance the information flows in channels and spaces for more comprehensive and distinctive FV feature extraction. The experimental results on nine public datasets show that Let-Net has excellent identification performance, and the EER and accuracy rate on the FV_USM dataset can reach 0.04% and 99.77%. The parameter number and FLOPs of Let-Net are only 0.89M and 0.25G, which means that the time cost of training and reasoning of the model is low, and it is easier to deploy and integrate into various applications.

Process safety plays a vital role in the modern process industry. To prevent undesired accidents caused by malfunctions or other disturbances in complex industrial processes, considerable attention has been paid to data-driven fault detection techniques. To explore the underlying manifold structure, manifold learning methods including Laplacian eigenmaps, locally linear embedding, and Hessian eigenmaps have been utilized in data-driven fault detection. However, only the partial local structure information is extracted from the aforementioned methods. In this paper, these typical manifold learning methods are synthesized to find the underlying manifold structure from different angles. A more comprehensive local structure is discovered under a unified framework by constructing an objection optimization function for dimension reduction of the process data. The proposed method takes advantage of different manifold learning methods. Based on the proposed dimension reduction method, a new data-driven fault detection method is developed. Hotelling’s T2 and Q statistics are established for the purpose of fault detection. Experiments on an industrial benchmark Tennessee Eastman process and a real blast furnace ironmaking process are carried out to demonstrate the superiority and effectiveness of the proposed method.

The study of notable people as agents for increasing cancer awareness started just in the last decades of the 20th century. This study aimed to identify Pan-American notable people with head and neck cancer (HNC) and to assess HNC’s professional perspective on communicating stories of notable patients with HNC to promote prevention. Methods: This cross-sectional study was conducted by applying a RedCap questionnaire to oral medicinists, oral pathologists, head and neck surgeons, and clinical oncologists with experience in HNC research, education, or treatment in Pan-American countries. Additionally, a structured search was performed on PubMed, Scopus, EMBASE, Web of Science, LILACS, and gray literature Results: We identified 42 notable people from the United States, Brazil, Argentina, Mexico, El Salvador, Chile, Colombia, and Peru who were mainly actors, athletes, and musicians. Participants agreed that stories of notable patients with HNC can positively impact the population and promote prevention if communicated by the internet, social media, and television. Conclusion: In the Pan-American region, notable individuals who have suffered from HNC may be powerful advocates for increasing cancer awareness and promoting prevention strategies. The professionals involved in the study expressed a positive inclination towards using the stories of these notable HNC survivors as an effective prevention strategy.

G protein-coupled receptor 15 (GPR15, also known as BOB) is an extensively studied orphan GPCR involving HIV infection, colonic inflammation and smoking-related diseases. Recently, GPR15 was deorphanized and its corresponding natural ligand demonstrated an ability of inhibiting cancer cell growth. However, no study reported the potential role of GPR15 in a pan-cancer manner. Using large-scale publicly available data from the Cancer Genome Atlas (TCGA) and the Genotype-Tissue Expression (GTEx) databases, we found that GPR15 expression is significantly lower in colon adenocarcinoma (COAD) than in normal tissues. And among 33 cancer types, GPR15 expression is significantly correlated with the prognoses of COAD, neck squamous carcinoma (HNSC), lung adenocarcinoma (LUAD) positively and stomach adenocarcinoma (STAD) negatively. This study also revealed that commonly upregulated gene set in the high GPR15 expression group (stratified via median) of COAD, HNSC, LUAD and STAD are enriched in immune systems, indicating that GPR15 might be considered as a potential target for cancer immunotherapy. Furthermore, we modelled the 3D structure of GPR15 and conducted the structure-based virtual screening. The top 8 hits compounds were screened and then subjected to molecular dynamics (MD) simulation for stability analysis. Our study provided novel insights into the role of GPR15 in a pan-cancer manner and discovered a potential hit compound for GPR15 antagonists.

With the rapidly increasing of people’s purchasing power, the fast moving consumer goods (FMCG) industry is supposed to grow dramatically. In order to gain more market access and profile, it is important for the FMCG manufacturers and retailers to find the preferences and provincial characteristics of consumers, to develop more suitable goods distribution strategy. Based on retails marketing data with geographic characteristics, this paper proposes a new combination of geography methods to solve the problems in distribution of FMCG. Via multiple K-means clustering and cross validation of KNN half off, the mesoscopic sales features are extracted through the classification of retails, which can indirectly grasp the consumer behavior characteristics. Based on space division and Moran’ I spatial autocorrelation arithmetic, two strategies are developed to satisfy consumer’s needs and promote sales, including conservative and positive strategies. According to our analysis, the total sales volume of the regions will increase by 5.1% and 10.3%. This study can be applied to the provide purchase strategies for FMCG retails according to their locations. The research can explore the consumption potential of different areas, thus improving the profile of retails and the development of economy in more mesoscopic scale.

As an emerging model, self-service fitness centers are reshaping the consumer fitness experience globally. Given the crucial role of customer loyalty in the sustainable operation and management of fitness service enterprises, this study constructs a structural model incorporating service quality, service convenience, customer satisfaction, word-of-mouth intentions, and repatronage intentions. The model is designed to elucidate the factors and mechanisms impacting customer loyalty at self-service fitness centers and further investigates how these relationships are affected by service methods, either with staff or without staff. The study employs PLS-SEM to empirically analyze 552 customer questionnaires from four self-service fitness centers in first-tier cities in China. The results reveal positive correlations among the constructs in the structural model, emphasizing the important position of raising service quality standards and reducing the time and effort expended by customers in the management of customer loyalty. Concurrently, service convenience was found to play a significant driving role in customers' perceived service quality. Through the chain-mediating effect of service quality and customer satisfaction, service convenience exerts a considerable positive impact on word-of-mouth intentions and repatronage intentions. Moreover, the study reveals significant differences in these relationships when considering service methods, either with staff or without staff.

Since the discovery of graphene, due to its excellent optical, thermal, mechanical and electrical properties, it has a broad application prospect in energy, materials, biomedicine, electromagnetism and other fields. A great quantity of researches on the physical mechanism of graphene has been applied to engineering in electromagnetism and optics. To study the properties of graphene, different kinds of numerical methods have been developed for simulating the electromagnetic field effects of graphene, and equivalent boundary conditions have been employed to replace graphene in the computational domain. In this work, the numerical methods with equivalent boundary conditions are reviewed, and some examples are provided to illustrate their applicability.

A number of epidemiological studies have implicated elevated iron levels with higher risks of cardiometabolic diseases, including the metabolic syndrome (MetS). MetS is a pathologic clustering of metabolic derangements characterized by central obesity, insulin resistance, hypertension, and dyslipidemia, which can all lead to increased cardiovascular disease morbidity and mortality. However, it remains unclear whether a causal association exists between higher iron status and MetS and its associated risk components. Using the data from the Taiwan Biobank (TWB) (19,012 males; 42,340 females) and of the European Whites from the UK Biobank (UKB) (128,549 males; 142,817 females), we first constructed ethnic- and sex-specific hemoglobin-polygenic risk scores (Hb-PRS) as instrumental variable (IV) for iron status with the Hb-associated SNPs we previously identified from genome-wide association studies (GWAS). We then conducted Mendelian randomization (MR) analyses to elucidate the causal role of elevated iron (either Hb-PRS quintiles or continuous Hb-PRS) on various metabolic components. MR-Egger regressions determined the potential pleiotropic effects of the constructed Hb-PRSs, while the causal relationship of Hb-PRS with anemia served as a control in the analyses. The mean Hb concentration range corresponding to the Hb-PRS quintiles is relatively narrow in both UKB (14.91-15.21 g/dL for males and 13.39-13.71 g/dL for females) and TWB (14.79-15.28 g/dL for males and 12.78-13.21 g/dL for females). In these windows of Hb-PRSs, we found differential associations of Hb-PRS with diabetes (T2D) or hyperglycemia (HGY) as compared to other MetS components. The highest quintiles of Hb-PRSs were causally associated with greater risks of hypertension (HTN) and hypertriglyceridemia (DLP) (i.e., [Taiwanese HC males: Q5 vs. Q1 ORHTN = 1.10 (1.00–1.21), p = 0.0473, Q4 vs. Q1 ORDLP = 1.10 (1.00–1.22), p = 0.0485; European White males: ORHTN = 1.05 (1.01–1.09), p = 0.0194, ORDLP = 1.04 (1.00–1.08), p = 0.0468]). Interestingly, we obtained a consistent negative causal association between increasing Hb-PRS quintiles and T2D or HGY risk across all sex subgroups (i.e., [Taiwanese HC females: ORHGY = 0.89 (0.84–0.95), 0.88 (0.83–0.94), 0.87 (0.82–0.93), 0.86 (0.81–0.92) from Q2 to Q5; European White females: ORHGY = 0.92 (0.87–0.98), 0.91 (0.86–0.97), 0.93 (0.87–0.98), 0.87 (0.82–0.93) from Q2 to Q5; all p &lt; 0.05]. The positive causal relationships between Hb-PRSs and diastolic blood pressure (DBP) and triglycerides (TG) but inverse causal association with glucose (GLU) and glycated hemoglobin (HbA1c) further corroborated such findings. There is, however, a lack of causal association with central obesity (CO), while a U-shaped type of causality was observed for gout (GT) or hyperuricemia (HUA). Sensitivity analyses, which excluded subjects based on self-reports of health conditions or medications and hospital episode statistics data, revealed similar results. Our MR studies confirm a modest causal relationship between propensity of elevated iron status and increased risk of HTN and DLP. We have further observed that modestly lower iron levels causally contribute to the development of T2D. Further validation and elucidation of the underlying biological mechanisms are highly warranted.

Land use is an embodiment of human socioeconomic activities and represents a bridge between these activities and natural systems. Through social activities, humans transform land use to promote social and economic development and improve production, living conditions, and eco-logical functions of land. Rural residential land represents a space for rural residents to reside in and exhibits spatial characteristics that evolve over time, which is proof of rural socioeconomic development. This paper observes rural residential land in 21 cities on the Grand Canal and analyses its spatial differentiation. Then, it explores the driving factors of this land using spatial grid analysis and the geographic detector model. Lastly, it proposes three different forms of rural residential land based on the results. The study found that: (1) the change of rural residential land in the northern part of the Grand Canal was more volatile than that in the southern part. The change of rural residential land from 1990 to 2020 conformed to the pattern of cultivated land - rural residential land - urban construction land; (2) Based on the driving factors of rural residen-tial land, the land is divided into one-dimensional cities, two-dimensional cities and three-dimensional cities. Circular, linear, and scattered cities of different sizes were affected by socioeconomic factors, transportation accessibility, and the natural environment, respectively; and (3) Finally, according to the spatial differentiation characteristics and the driving factors of rural residential land, the study proposes the construction of three types of villages through the strate-gies of constructing large-scale villages, relocating and reconstructing new villages, and con-structing high-quality villages, respectively. Enhancing the scientific planning of rural residential land and its efficiency can offer the protection of agricultural land and the integration of urban and rural areas in the new era.

Automatic recognition methods for non-stationary EEG data collected from EEG sensors play an essential role in neurological detection. The integrative approaches proposed in this study consists of Symlet wavelet processing, a gradient boosting machine, and a grid search optimizer for a three-level classification scheme for normal subjects, intermittent epilepsy, and continuous epilepsy. Fourth-order Symlet wavelets were adopted to decompose the EEG data into five time-frequency sub-bands, whose statistical features were computed and used as classification features. The grid search optimizer was used to automatically find the optimal parameters for training the classifier. The classification accuracy of the gradient boosting machine was compared with that of a support vector machine and a random forest classifier constructed according to previous descriptions. Multiple-index were used to evaluate the Symlet wavelet transform-gradient boosting machine-grid search optimizer classification scheme, which provided better classification accuracy and detection effectiveness than has recently reported in other work on three-level classification of EEG data.

Alternative splicing can produce transcripts that affect cancer development and shows potential for cancer diagnosis and treatment. However, intron retention (IR), a type of alternative splicing, has been less systematically studied in cancer biology research. Here, we generated a pan-cancer IR landscape for more than 10,000 samples across 33 cancer types from The Cancer Genome Atlas (TCGA). We characterized differentially retained introns between tumor and normal samples and identified retained introns associated with survival. We discovered 988 differentially retained introns in 14 cancers, some of which demonstrated diagnostic potential in multiple cancer types. We also inferred a large number of prognosis-related introns in 33 cancer types, and the associated genes included well-known cancer hallmarks such as angiogenesis, metastasis, and DNA mutations. Notably, we discovered a novel intron retention event inside 5′UTR of STN1 that is associated with the survival of lung cancer patients. The retained intron reduces translation efficiency by producing upstream open reading frames (uORFs) and thereby inhibits colony formation and cell migration of lung cancer cells. Besides, the IR-based prognostic model achieved good stratification on certain cancers, as illustrated in acute myeloid leukemia. Taken together, we performed a comprehensive IR survey at a pan-cancer level, and the results implied that IR has the potential to be diagnostic and prognostic cancer biomarkers, as well as new drug targets.

BACKGROUND AND OBJECTIVE: The use of biomass for cooking carries significant health implications and can lead to adverse environmental issues such as deforestation, greenhouse gas emissions, and erosion. Despite these concerns, there is a lack of information about the nature and extent of cooking emissions in many developing countries. To address this gap, a study was conducted to assess cooking emission levels and their associated health effects among households in Dodoma City, Tanzania. METHODS: A descriptive cross-sectional design was conducted, involving 285 households in the peri-urban area of Dodoma City, Tanzania. A combination of questionnaires, observational checklists, and sampling devices (Aeroqual series 500 for Carbon Monoxide and Temptop PMD 351 for Particulate Matters) were employed for data collection, adhering to established protocols. Additionally, lung function tests were conducted with consent from the primary household cooks. Collected data were entered into an Excel spreadsheet and analyzed using STATA 17 software. FINDINGS: Out of 285 participants, 74.7% predominantly use charcoal for cooking, with 68.4% having outdoor kitchen setups. Significant differences in pollutant concentrations were observed across various fuel types (P=0.0001), with firewood emitting higher levels of particulate matter and carbon monoxide. Carbon monoxide concentrations during cooking were 6 times higher for firewood, 5 times higher for charcoal-gas, and 3 times higher for charcoal compared to WHO daily average limits. Additionally, a positive correlation between pollutant concentrations was noted (P-value = 0.0000). Lung problems 17.8% followed by eye irritation 15.7% were mentioned by those who claimed to know the health effects associated with cooking emissions. In addition, the spirometry test indicated that the majority of the participants had % predicted >80 while only 19% had % predicted below 50. CONCLUSION: Charcoal and firewood remain the primary cooking fuels in the study area despite their significant negative impacts. Our findings highlight a lack of awareness among community members regarding the health effects of biomass cooking emissions and insufficient guidance on constructing healthy kitchens. To address this, enforcing building standards, raising health awareness, and ensuring affordable access to modern fuels are crucial steps. These measures are essential for promoting healthier cooking practices and mitigating the adverse effects on households.

At secondary healthcare, Carbapenem-Resistant Enterobacterales (CREs) such as observed in Klebsiella pneumoniae are a global public health priority with significant clinical outcomes. In this study, we describe clinical, phenotypic, and genotypic characteristics of three pan-drug resistant (PDR) isolates that demonstrated extended resistance to conventional and novel antimicrobials. All patients had risk factors for acquisition of multidrug resistant organisms while microbiological susceptibility testing showed resistance to all conventional antimicrobials. Advanced susceptibility testing demonstrated resistance to broad agents such as ceftazidime-avibactam, ceftolozane-tazobactam, and meropenem-vaborbactam. Nevertheless, all isolates were susceptible to cefiderocol, one of the novel antimicrobials that demonstrated potent in vitro activity against resistant Gram-negative bacteria including CREs pointing towards potential therapeutic role for PDR pathogens. Expanded genomic studies revealed multiple antimicrobial resistant genes (ARGs), including blaNMD-5 and blaOXA derivative types as well as a mutated outer membrane porin protein (OmpK37).

The ZIPs (ZRT/IRT-like proteins) play critical roles in the absorption, transport, and intracellular balance of metal ions essential for various physiological processes in plants. However, little is known about the pan-genomic characteristics and properties of ZIP genes in cucumber (Cucumis sativus L.). In this study, we identified 10 CsZIP genes from the pan-genome of 13 C. sativus accessions. Among them, only CsZIP10 showed no variation in protein sequence length. We analyzed the gene structure, conserved domains, promoter cis-elements, and phylogenetic relationships of these 10 CsZIP genes derived from "9930". Based on phylogenetic analysis, the CsZIP genes were classified into three branches. Amino acid sequence comparison revealed the presence of conserved histidine residues in the ZIP proteins. Analysis of promoter cis-elements showed that most promoters contained elements responsive to plant hormones. Expression profiling in different tissues showed that most CsZIP genes were expressed at relatively low levels in C. sativus leave, stem, and tendril, and CsZIP7 and CsZIP10 were specifically expressed in root, indicating their potential involvement in the absorption and transport of metal ions. Transcriptomic data indicated that these 10 ZIP genes displayed responses to both downy mildew and powdery mildew, and CsZIP1 were significantly downregulated after both salt and heat treatments. In conclusion, this study deepens our understanding of the ZIP gene family and enhances our knowledge of the biological functions of CsZIP genes in C. sativus.

Recent studies suggest that PEBP1/RKIP and YY1, despite having distinct molecular functions, may interact and mutually influence one another's activity. They exhibit reciprocal control over each other's expression through regulatory loops, prompting the hypothesis that their interplay could be pivotal in cancer advancement and resistance to drugs. To delve into this interplay's functional characteristics, we conducted a comprehensive analysis using bioinformatics tools across a range of cancers. Our results confirm the association between elevated YY1 mRNA levels and varying survival outcomes in diverse tumors. Furthermore, we observed differing degrees of inhibitory or stimulatory effects of these two genes in various cancer pathways, along with correlations between their mRNA expression and immune infiltration. Additionally, YY1/PEBP1 expression (or methylation) displayed connections with genomic alterations across cancer types. Notably, we uncovered links between YY1/PEBP1 and different indicators of immunosuppression, such as immune checkpoint blockade response, and T-cell dysfunction/exclusion levels, across different patient groups. Overall, our findings underscore the significant role of the interplay between YY1 and PEBP1 in cancer progression, influencing genomic changes, tumor immunity or the tumor microenvironment. Additionally, these two gene products appear to impact the sensitivity of anticancer drugs, opening new avenues for cancer therapy.

Evaluation of the effectiveness of protected areas is critical for forest conservation policies and priorities. To evaluate their effectiveness, we used 30-m resolution forest cover change data between 1990 and 2010 for ~4,000 protected areas and analyzed the relationships of the effectiveness of protected areas with socio-economic variables. Our results show that protected areas in the Tropics avoided 83,500 ± 21,200 km2 of deforestation during the 2000s. Brazil’s protected areas have the largest amount of avoided deforestation of 50,000 km2. We also show the amount of international aid received by tropical countries compared to the effectiveness of protected areas. International aid had major benefits in Latin America led by Brazil while tropical Asian countries used the resource ineffectively. Our results demonstrate that protected areas have been relatively more efficient in countries where deforestation pressures were increasing, and governance and forest change monitoring capacity are important factors for enhancing the efficacy of international aid.

Our paper examines the place of Pan-Africanism as an educational, political, and cultural movement which had a lasting impact on the on the relationship between liberation and people of African descent, in the continent of Africa and the Diaspora. We also show its evolution, beginning with formerly enslaved Africans in the Americas, to the colonial borders of the 1884 Berlin Conference, and conclude with the independence movements in Africa. For formerly enslaved Africans, Pan-Africanism was an idea that helped them see their commonalities as victims of racism. That is, they realized that they were enslaved because they came from the same continent and shared the same racial heritage. They associated the continent of Africa with freedom. The partitioning of Africa at the Berlin Conference (colonialism) created pseudo-nation states out of what was initially seen as an undivided continent. Pan-Africanism provided an ideology for rallying Africans at home and abroad against colonialism, and the creation of colonial nation-states did not erase the idea of a united Africa. As different African nations gained political independence, they took it upon themselves to support those countries fighting for their independence. The belief, then, was that as long as one African nation was not free, the continent could not be viewed as free. The existence of nation-states did not imply the negation of Pan-Africanism. The political ideas we examine include those of Marcus Garvey, W.E.B. Du Bois, Kwame Nkrumah, and Thabo Mbeki.

Background: Participation is low (43%) in Australia’s National Bowel Cancer Screening Program which provides a biennial Fecal Immunochemical Test kit mailed to the home of Australians aged 50-74 years. While several factors for non-participation have been identified, the role of mental and physical health on screening behaviour has not been assessed. Methods: Participants of the Australasian Colorectal Cancer Family Registry Cohort were asked to complete a questionnaire on their colorectal cancer screening in the past five years and a validated measure of mental and physical health. The association between mental and physical health and screening was determined for Australian participants aged 45-75 years who had never been diagnosed with colorectal cancer. Multivariable logistic regression was used to adjust for measured potential confounders. Results: Of the 1130 eligible participants, 819 reported colorectal cancer screening in the past five years (72%). After adjusting for potential confounders, there was no evidence that overall mental or physical health was associated with colorectal cancer screening. However, one specific scale, general health, was positively associated with colorectal cancer screening (p=0.014) with those reporting higher levels of general health undergoing screening.Conclusion: We found limited evidence that mental and physical health, as measured by a short questionnaire, are associated with colorectal cancer screening. A potential limitation is reverse causation where previous screening may have impacted mental or physical health. A more detailed study of physical and mental health as barriers or enablers of screening is needed.

Quantification of the trade-offs among greenhouse gas (GHG) emissions, yield and farmers’ incomes is essential for proposing economic and environment nitrogen (N) management strategies for optimizing agricultural production. A four-year (2017–2020) field experiment (including four treatments: control experiment (CK), suitable utilization of fertilization (SU), emission reduction treatment (ER), and high fertilization (HF)) was conducted on maize (Zea mays L.) in the North China Plain. The Life Cycle Assessment (LCA) method was used in this study to quantify the GHG emissions and farmers’ incomes during the whole maize production process. The total GHG emissions of CK, SU, ER and HF treatments in the process of maize production are 10,755.2, 12,908.7, 11,950.1, and 14,274.5 kg CO2-eq ha−1 respectively, of which the direct emissions account for 84.8%, 76.8%, 74.9%, and 71.0%, respectively. Adding inhibitor significantly reduced direct GHG emissions, and the N2O and CO2 emissions from the maize fields in the ER treatment decreased by 30.0% and 7.9% compared to those in the SU treatment. Insignificant differences in yield were found between the SU and ER treatments, indicating that adding fertilizer inhibitors did not affect farmers’ incomes while reducing GHG emissions. The yield for SU, ER and HF treatments all significantly increased by 12.9%–24.0%, 10.0%–20.7% and 2.1%–17.4% compared to CK, respectively. In comparison with CK, both SU and ER significantly promoted agricultural net profit (ANP) by 16.6% and 12.2% with the mean ANP values of 3,101.0 USD ha-1 and 2,980.0 USD ha-1, respectively. Due to the high agricultural inputs, the ANP values in the HF treatment was 11.2%, 16.6% and 12.4% lower than those in the SU treatment in 2018–2020. In conclusion, the combination of N fertilizer and inhibitors was proved to be an environmentally friendly, high-profit and low-emissions production technology while sustaining or even increasing maize yields in the North China Plain, which was conducive to achieving agricultural sustainability.

This paper proposed emotion recognition methods for consecutive facial images, and implements the inference of neural network model on a field-programmable gate array (FPGA). The proposed emotion recognition methods are based on a neural network model architecture that combines convolution neural networks (CNNs), long short-term memory (LSTM), and fully connected neural networks (FCNNs), called CLDNN or ConvLSTM-FCN. This type of neural network mod-el can analyze the local feature sequences obtained through convolution of data, making it suita-ble for processing time-series data such as consecutive facial images. In this paper, sequences of facial images are sampled from videos corresponding to various emotional state of subjects. The sampled images are then pre-processed with the processes includes facial detection, greyscale conversion, resize, and data augmentation if necessary. The 2-D CNN in ConvLSTM-FCN is used for feature extraction for these pre-processed facial images. These sequences of facial im-age features are time sequences with dependent properties between the elements within them. The LSTM is then used to model these time sequences followed by fully connected neural net-works (FCNNs) for classification. The proposed consecutive facial emotion recognition method achieves an average recognition rate of 99.51% on RAVDESS dataset, 87.80% on BAUM-1s dataset and 96.82% on eNTERFACE’05 data set, using 10-fold cross-validation on the PC. Some com-parisons of recognition accuracies between the proposed method and the other existing related works are conducted in this paper. According to the comparisons, the proposed emotion recog-nition methods outperform the existing related researches. The proposed emotion recognition methods are then implemented on an FPGA chip using the neural network model inference algo-rithms in this paper, and the accuracies of the experiments conducted on the FPGA chip are iden-tical to those obtained on the PC. This verifies that the proposed neural network model imple-mented on the FPGA chip performs well.

As matrix representations of magic labelings of related hypergraphs, magic squares and their various variants have been applied to many domains. Among various subclasses, trimagic squares have been investigated for over a hundred years. The existence problem for trimagic squares with singly even orders and orders 16n has been solved completely. However, very little is known for the existence of trimagic squares with other even orders except for the only three examples and three families. We construct normal trimagic squares by using product constructions, row-square magic rectangles, and trimagic pairs of orthogonal diagonal Latin squares. We give a new product construction: For positive integers p, q, and r having the same parity other than 1, 2, 3, 6, if normal p × q and r × q row-square magic rectangles exist, then a normal trimagic square with order pqr exists. As its application, we construct normal trimagic squares of orders 8q^3 and 8pqr for all odd integers q not less than 7 and p,r ∈ {7, 11, 13, 17, 19, 23, 29, 31, 37}. Our construction can easily be extended to construct multimagic squares.

This paper aims to explore the development of the field of Intangible Cultural Heritage Design. It seeks to understand the global trends in this field and provide insights for its growth and development. The objectives are achieved through a mixed-methods approach that combines bibliometric methods and content analysis. This approach allows for a quantitative and qualitative analysis of the scientific literature related to Intangible Cultural Heritage Design. The findings of the work include an analysis of the most productive countries/regions, institutions, journals, and authors in the field of Intangible Cultural Heritage Design. It also includes citation and co-citation analysis, which helps identify influential scholars and popular journals in the field, as well as patterns of col-laboration within the field. The outcomes and implications for practice include a better understanding of the global trends in Intangible Cultural Heritage Design and insights for its growth and development. The research find-ings have important theoretical and practical implications for the field, and future research directions are pro-posed. The value of the paper lies in its contribution to a better understanding of the global trends in Intangible Cultural Heritage Design. It provides insights and assistance for its growth and development, mak-ing it valuable to researchers and practitioners in the field.

This paper serves as a seamless continuation of the previous work titled "Special Spirals are Produced by the ROTASE Galactic Spiral Equations with the Sequential Prime Numbers." Upon revisiting the data, a noteworthy observation emerged: the special spirals can be meticulously aligned with the prime spiral on a point-by-point basis through careful scaling and rotation for the parameter ρ remaining a constant greater than one. As ρ increases, both the scaling factor and rotation angle exhibit a corresponding augmentation, albeit with an intriguing caveat—the rotation angle asymptotically approaches its limit of 90°. Notably, the galactic spiral can be perceived as a remarkably close approximation of the Archimedean spiral, with the degree of proximity increasing as ρ grows larger. Furthermore, an intriguing correspondence arises when ρ takes on a value of 1; at this value, the galactic spiral bears a striking resemblance to the Fermat spiral, the space between two consecutive spiral loops undergoes a continuous reduction as the loop's radius expands, yet it never diminishes to zero; simultaneously, the area between two successive loops experiences an augmentation with the value of ρ.

With the galaxy J101652.52 as a model galaxy, this paper studied on the temporal duration of optically observed spiral patterns in disc galaxies is based on the finite reservoir of hydrogen available without replenishment following the initial formation of these well-isolated galaxies. The galaxy J101652.52 exhibits a grand design spiral pattern of two wide open spiral arms with perfect central symmetry, has only rear side trail effect, which clearly indicates that there is no corotation circle, therefore, the Density wave theory proposed for the spiral arm formation may not be applicable in this galaxy. The results reveal a gradual decline in observable spiral arms regardless of any spiral arm formation mechanism. This reduction occurs after half-loop rotation (as defined in the paper) as hydrogen reserves deplete, hindering new star formation. Ultimately, spiral patterns may possibly become optically invisible at normal conditions after a full-loop rotation (as defined in the paper) with hydrogen depletion, even if the formation mechanism remains active. The spiral galaxies with spiral arms decoupled from galactic bars or having soft spiral structures shall have similar results as long as that the spiral pattern rotation speed is significant different from the galactic matter rotation speed. Most of observed spiral galaxies have soft spiral structures, their spiral patterns dynamically change constantly. The results of this study support the idea of short-lived spiral patterns compared to the lifespan of the spiral galaxies. The spiral arm formation may occur once like the onetime firework show in a galaxy’s life based on the limited availability of hydrogens. A concise, universally applicable mechanism for spiral arm formation across various galaxies should exist which provides a single mathematical formula to describe the broad range of morphologies of the spiral arms with few adjustable parameters. Some exceptions may be explained within this framework. Furthermore, the observed data on spiral pattern and galactic bar rotation speeds in the Milky Way require rigorous verification, particularly concerning the winding problem.

The Density Wave Theory, which aims to explain the formation of spiral arms in disc galaxies, has been subject to discussion. According to this theory, at the co-rotation circle, the rotational velocity of the density waves or spiral arms matches that of the galactic matter. Consequently, this alignment should impede the formation of new stars within this co-rotation circle, leading to the presence of dark or dim gaps within the spiral arms. Additionally, the theory predicts the occurrence of the front side trail effect in the inner region of the co-rotation circle and the rear side trail effect in the outer region. However, despite these expectations, no such spiral patterns have been observed, prompting the need for revision or reconsideration of the Density Wave Theory.

This paper illustrates that the ROTASE model proposed by the author for the formation of spiral arms of galaxies is nicely demonstrated by the spirals generated by rockets venting fuel during free fall. The patterns of spirals by the falling rockets strongly support that the spiral galaxies with perfect central symmetry have to be originated from the galactic centers, and the spiral arms and the galactic bars are bound together as “rigid” body. The exclusive presence of a rear side trail effect in galaxies indicates the absence of co-rotation, and the rotation of spiral arms is faster than the galactic matters. The exact nature of X-matter remains an open question.

This short paper demonstrates that the galactic spiral equations developed from ROTASE model can be used to morphologically simulate the phyllotactic spiral-ring patterns of plants. It is also noticed during this project that although the numbers in the Fibonacci sequence dominate the phyllotactic numbers, there are still significant phyllotactic numbers are not in the Fibonacci sequence, however, most of those numbers are well fit into a Fibonacci sibling sequence starting with numbers 0 and 2. Many plants show the phyllotactic number pairs of 10-16, 16-26 and 26-42 from the Fibonacci sibling sequence, which is the second dominated sequence in the phyllotaxis.

In this paper, the sequential prime numbers are used as variables for the galactic spiral equations which were developed from the ROTASE model. Special spiral patterns are produced when prime numbers are treated with the unit of radian. The special spiral patterns produced with the first 1000 prime numbers have 20 spirals arranged in two groups. The two groups have perfect central symmetry with each other and are separated with two spiral gaps. The special spiral pattern produced with natural numbers from 1 to 7919 shows 6 spirals in the central area and 44 spirals in the outer area. The whole 7919 spiral points can be plotted with either 6-spiral pattern or 44-spiral pattern. For the spirals only produced by the prime numbers in the 6-spiral pattern plotting, the spiral 2 and spiral 3 each has only one spiral point produced by prime number 2 and 3, respectively, all other spiral points produced by other prime numbers are located on the spiral 1 and spiral 5. The special spiral pattern is well explained with careful analysis, it is concluded that all prime numbers greater than 3 must meet one of the equations: P₁ = 1 + 6 * n (n > 0) P₅ = 5 + 6 * n (n ≥ 0) In other words, every prime number greater than 3 is either a P₁ prime number or a P₅ prime number, no exception. Matching one of the equations is a necessary condition for a number to be a prime number, not a sufficient condition. Hope such sufficient condition can be found in the future. The number of P₁ prime numbers roughly equal the number of P₅ prime number in the first 2 billion prime numbers. The galactic spiral equations with golden angle can duplicate Vogel’s result for the simulation of sunflower seed head pattern, and a pinwheel pattern can be produced also with galactic spiral equations and 1 degree more than golden angle.

Sensory evaluation has been widely applied in assessing the quality of many consumer products that directly serve human needs such as food, beverages, clothing, etc. This paper first examined the inherent deficiencies in this approach, due mainly to the essentially subjective nature of human sensory preference. It then argued that instinctively designating certain materials attributes as sensory perceptions is unnecessary; considering every scientific concept is in essence the processed results of our sensory organs/brains, i.e., all quantities were initially human perceptions. Scientific advances have inevitably generated gradual transformation of such human perceptions as warmth and heaviness into objective parameters measurable in physical quantities like temperature and kilograms. Then using existing successful examples, it demonstrated firmly how the sensory attributes can be assessed by more reliable instrumental methods, and envisioned the key steps to turning a perception into scientifically measurable parameter(s).

Cloth wearing seems so natural that everyone is self-deemed knowledgeable and has some expert opinions about it. However to clearly explain the physics involved, and hence to make predictions for clothing design or selection, turns out as demonstrated below to be quite challenging even for experts. Cloth is a multiphased, porous and anisotropic material system and usually in multilayers. Unlike ordinary engineering heat transfer problems, the human body acts as an internal heat source in a clothing situation, thus forming a temperature gradient between body and ambient, and the sign of this gradient often changes as the ambient temperature varies. Our body also perspires and the sweat evaporates, an effective body cooling process via phase change. To bring all the variables into analysis quickly escalates into a formidable task. This work attempts to unravel the problem from a physics perspective, focusing on several rarely noticed yet critically important mechanisms involved so as to offer a clear and accurate depiction of the principles in clothing thermal comfort.

This study, based on the AISAS model, explores the impact of the interaction effect between visual and auditory signals on consumer purchase behavior. Using experimental methods, 120 participants were randomly assigned to four different visual and auditory signal combinations, and their purchase intentions and actual purchase behavior were measured. The results show that the interaction effect between visual and auditory signals has a significant impact on both purchase intentions and actual purchase behavior, and there is a significant positive relationship. Specifically, when visual and auditory signals are mutually consistent, consumers have the highest purchase intentions and actual purchase behavior; when both visual and auditory signals are absent, consumers have the lowest purchase intentions and actual purchase behavior; when either the visual or auditory signal is missing, consumers' purchase intentions and actual purchase behavior are in between the two extremes. This study provides a new perspective for understanding consumers' decision-making processes in multi-sensory environments and offers valuable insights for the development of marketing strategies.

In order to achieve the dual carbon goal and simplify the decarbonization process, a CO2 recovery process of the fire-flooding exhaust was designed. The process adopted the two-stage membrane separation method to recover CO2 and obtain high purity CO2 rich flow, and then through the mixed refrigerant liquefaction and rectification column, food grade liquid CO2 was obtained. HYSYS process simulation shows that for the fire-flooding exhaust with a flow rate of 1000 kg/h and a given composition, the process can achieve a CO2 recovery of 69.02%, total product sales S=2086.8 yuan/h, and specific power consumption of 2.818 kW∙h/kg. On this basis, a hybrid simulation platform of HYSYS & Matlab was established. Taking the specific power consumption of the product as the objective function, sequential quadratic programming (SQP) algorithm was adopted to optimize the process, and the optimized specific power consumption was reduced by 18.8%. Finally, by adjusting N2/CO2 components, the adaptability of the optimization condition was analyzed.

Motivated by South Africa's need in the transition to a net-zero economy; this study 10 investigates the integration of renewable energy sources (RES) into oil refineries, considering 11 therein unique challenges and opportunities. The research focuses on optimizing RES allocation 12 using Particle Swarm Optimization (PSO), a data-driven approach that adapts to real-time 13 operational conditions. Traditional energy management systems often struggle with the inherent 14variability of RES, leading to suboptimal energy distribution and increased emissions. Therefore, 15 this study proposes a PSO-based renewable energy allocation strategy specifically designed for oil 16 refineries. It considers factors like the levelized cost of energy, geographical location, and available 17 technology. The methodology involves formulating the optimization problem, developing a PSO 18 model, and implementing it in a simulated oil refinery environment. The results demonstrate 19 significant convergence of the PSO algorithm, leading to an optimal configuration for integrating 20 RES and achieving cost reductions and sustainability goals. The optimization result of 4,457,527.00 21 Rand achieved by iterations is much better than the result of 4,829,638.88 Rand acquired using 22Linear Programming as the baseline model. The mean cost, indicating consistent performance, has 23 remained at its original value of 4,457,527.00 Rand, highlighting the convergence. Key findings 24 include the average distance measure decreasing from 4.2 to 3.4, indicating particle convergence; 25 swarm diameter decreasing from 4.7 to 3.8, showing swarm concentration on promising solutions; 26 average velocity decreasing from 7.8 to 4.25, demonstrating refined particle movement; and the 27 optimum cost function achieved at 4,457,527 Rand with zero standard deviation, highlighting 28 stability and optimal solution identification. This research offers a valuable solution for oil 29 refineries seeking to integrate RES effectively, contributing to South Africa's transition to a 30sustainable energy future.

In order to quickly develop a multi ship collaborative collision avoidance plan in multi ship encounter scenarios, a multi ship collision avoidance decision model is proposed in accordance with the requirements of the International Maritime Collision Avoidance Regulations, taking into account the collision avoidance operations in multi ship encounter scenarios. Firstly, the collision risk between ships is determined by the closest encounter distance (DCPA) and closest encounter time (TCPA). Secondly, a decision objective function is established based on rules, degree of ship deviation, and ship risk. Finally, the prediction mechanism is used to calculate the minimum value of the objective function and complete the collision avoidance decision. The simulation results show that in the scenario of multiple ship encounters, the collision avoidance model can achieve safe collision avoidance with a smaller steering frequency and a shorter col-lision avoidance time. The proposed multi ship collision avoidance model can provide reference for collision avoidance decision-making in multi ship encounter scenarios, which helps to im-prove the collision avoidance efficiency in multi ship collision avoidance

In mesoscale eddies, chemical properties and biological composition are different from those in surrounding water, due to their unique physical processes. It is unclear how physical-biological coupling occurs in warm-core eddies, particularly since no study has examined the relationship between bacteria and viruses. The purpose of the present study was to examine the influence of anticyclonic warm eddy on the relationship between bacterial and viral abundances as well as viral activity (viral production) in different depths. In the core of warm eddy, bacterial abundance (0.48 to 2.82 ×105 cells mL−1) fluctuated less than that of the outside eddy (1.12 to 7.03×105 cells mL−1). In particular, there was four-folds higher of viral-bacterial abundance ratio (VBR) estimated within the eddy below DCM than the outside eddy. We suggest that prevailing physical forces with downwelling at the center of the anticyclonic warm eddy, viruses can also be transmitted into the deep ocean directly through adsorption on particulate organic matter during sinking. Overall, our findings provide valuable insights into the interaction between bacterial and viral communities and their ecological mechanism within the warm eddy.

Global wind observations are fundamental for studying weather and climate dynamics. Most wind measurements come from atmospheric motion vectors (AMVs) by tracking the displacement of cloud or water vapor features. These AMVs generally rely on thermal infrared (IR) techniques for their height assignments, which are subject to large uncertainties in the presence of weak or reversed vertical temperature gradients around the planetary boundary layer (PBL) and with tropopause folding. Stereo imaging can overcome the height assignment problem using geometric parallax for feature height determination. In this study we develop a stereo 3D-Wind algorithm to simultaneously retrieve AMV and height from geostationary (GEO) and low Earth orbit (LEO) satellite imagery and apply it to collocated Geostationary Operational Environmental Satellite (GOES) and Multi-angle Imaging SpectroRadiometer (MISR) imagery. The new algorithm improves AMV and height relative to products from GOES or MISR alone, with an estimated accuracy of <0.5 m/s in AMV and <200 m in height with 2.2 km sampling. The algorithm can be generalized to other LEO-GEO or GEO-GEO combinations for greater spatiotemporal coverage. The technique demonstrated with MISR and GOES has important implications for future high-quality AMV observations, for which a low-cost constellation of CubeSats can play a vital role.

Mammalian seminal plasma contains a multitude of bioactive components, including lipids, glucose, mineral elements, metabolites, proteins, cytokines and growth factors, with various functions during insemination and fertilization. The seminal plasma protein PDC-109 is one of the major soluble components of the bovine ejaculate and is crucially important for sperm motility, capacitation and acrosome reaction. A hitherto underappreciated function of seminal plasma is its anti-microbial and anti-viral activity, which may limit sexual transmission of infectious diseases during intercourse. We have recently discovered that PDC-109 inhibits the membrane fusion activity of influenza virus particles and significantly impairs viral infections at micromolar concentrations. Here we investigated whether the antiviral activity of PDC-109 is restricted to Influenza or if other mammalian viruses are similarly affected. We focused on Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2), the etiological agent of the Coronavirus Disease 19 (COVID-19), thoroughly assessing PDC-109 inhibition with SARS-CoV-2 Spike (S)-pseudotyped reporter virus particles, but also live-virus infections. Consistent with our previous publications we found significant virus inhibition, albeit accompanied by substantial cytotoxicity. Using time-of-addition experiments however, we discovered treatment regimen that enable virus suppression without affecting cell viability. We furthermore demonstrated that PDC-109 is also able to impair infections mediated by the VSV glycoprotein (VSVg) thus indicating a broad pan-antiviral activity against multiple virus species and families.

Evaporation is one of the main processes in the hydrological cycle, and it is one of the most critical factors in agricultural, hydrological, and meteorological studies. Due to the interactions of multiple climatic factors, the evaporation is a complex and nonlinear phenomenon; therefore, the data-based methods can be used to have precise estimations of it. In this regard, in the present study, Gaussian Process Regression (GPR), Nearest-Neighbor (IBK), Random Forest (RF) and Support Vector Regression (SVR) were used to estimate the pan evaporation (PE) in the meteorological stations of Golestan Province, Iran. For this purpose, meteorological data including PE, temperature (T), relative humidity (RH), wind speed (W) and sunny hours (S) collected from the Gonbad-e Kavus, Gorgan and Bandar Torkman stations from 2011 through 2017. The accuracy of the studied methods was determined using the statistical indices of Root Mean Squared Error (RMSE), correlation coefficient (R) and Mean Absolute Error (MAE). Furthermore, the Taylor charts utilized for evaluating the accuracy of the mentioned models. The outcome indicates that the optimum state of Gonbad-e Kavus, Gorgan and Bandar Torkman stations, Gaussian Process Regression (GPR) with the error values of 1.521, 1.244, and 1.254, the Nearest-Neighbor (IBK) with error values of 1.991, 1.775, and 1.577, Random Forest (RF) with error values of 1.614, 1.337, and 1.316, and Support Vector Regression (SVR) with error values of 1.55, 1.262, and 1.275, respectively, have more appropriate performances in estimating PE. It found that GPR for Gonbad-e Kavus Station with input parameters of T, W and S and GPR for Gorgan and Bandar Torkmen stations with input parameters of T, RH, W, and S had the most accurate performances and proposed for precise estimation of PE. Due to the high rate of evaporation in Iran and the lack of measurement instruments, the findings of the current study indicated that the PE values might be estimated with few easily measured meteorological parameters accurately.

In this paper, we consider an economy, in which consumers exhibit unrealistic optimism, and show that such an economy is more likely to undergo early recessions and underinvestment rather than experiencing bubbles or overinvestment. In this model, each consumer incorrectly believes that a negative aggregate preference shock will hit all other consumers, but not herself. When consumers have such an unrealistic optimism, the output price must fall prematurely before the aggregate shock occurs. The reason is that if the price does not plummet today, all consumers would postpone making purchases by falsely expecting that an arbitrage opportunity will arise in the future when the aggregate shock hits the economy, in which case, the output market cannot clear. We also show that the government has the potential to improve welfare of the economy by providing subsidies, if the government judiciously selects the right timing for intervention.

In this paper, a land utilization efficiency evaluation model, which takes environmental loss into consideration, has been structured via taking advantage of the slack-based measure (SBM) model. Meanwhile, based on the panel data from 280 prefecture-level cities in China from 2003 to 2013, the paper thoroughly probed into, and discussed, the effect imposed by industry clustering and specialization on the utilization efficiency of urban land. Research results indicate several conclusions, as follows: (1) Taking environmental loss into account, the land utilization efficiency of prefecture-level cities in China is generally low. During the research period, the average value of the land utilization efficiency of prefecture-level cities in China is only 0.349, with, first, a declining trend, and then a rise. Geographically speaking, the land utilization efficiency presents a “depression in the center” phenomenon which means the land utilization efficiency of prefecture-level cities in the central China are relatively lower than in the east and west. Now, the difference among the urban land utilization efficiency in China significantly reflects the distinctions among Eastern, Western, and Central China. Moreover, the contribution degree of the difference of the land utilization efficiency among cities of central China to the aggregation difference shows an ascending momentum. Additionally, the relation between the population scale and land utilization efficiency in cities manifests as a U shape; (2) theoretically speaking, the relation between industry clustering and urban land utilization efficiency presents an inverted-U shape. However, this kind of relation is not significant in Western and Central China and medium-sized cities. Moreover, most of cities are still relatively far away from the inflection point or the critical value; and (3) the industry professional level has imposed a positive influence on urban land utilization efficiency. However, that influence is not significant in Eastern China and large cities. Consequently, strengthening the industry professional development of Western and Central China and small and medium-sized cities, facilitating diversified development of industries in Eastern China and large cities, and accelerating industrial clustering, all of these measures above will be conducive to improving urban land utilization efficiency in China.

Increased attention has been paid to the influence of coal mining subsidence on ecological environment. Restoration of ecosystem in damaged mining area is critical for restoring disturbed environment. The comparing of plant communities and microbial communities in the artificial restoration and natural restoration areas provides an effective method for evaluating the restoration effects. However, such studies are limited in coal mining subsidence restoration areas. Subsidence area in Shendong mining area, located in the semi-arid region of Western China, was restored from 2003 with 5 ecological restoration plant species. In July 2017, the comparison and analysis of plant and microbial communities were conducted at the artificial restoration areas (AR) and the natural remediation areas (NR). The results showed that the artificial ecological restoration in Shendong mining area has achieved some success, but it has not recovered to a similar ecosystem before the destruction. A higher plant species, coverage and bacterial community diversity were observed in AR. However, these features have lower similarity compared with those in NR sites. Potential soil factors, such as pH, moisture content, total carbon content, organic matter, nitrogen and bulk density, have a greater impact on soil bacterial community structure and diversity. In the ecological restoration of the mining area, attention should be paid to the restoration of soil properties in the mining area. This study can provide theoretical guidance for more scientific ecological restoration in the damaged mining area.

Natural gas hydrate, also known as combustible ice and mainly composed of methane, it is identified as the potential clean energy in the 21th century. Due to its large reserves, gas hydrate can ease problems caused by energy resource shortage and has gained attention around the world. In this paper, we focus on the exploration and development of gas hydrate as well as discussing its status and future development trend in China and abroad, then we analyze its opportunities and challenges in China from four aspects: resource, technology, economy and police with five forces model and PEST method. The results show, China has abundance gas hydrate resource; however the backward technologies and inadequate investment has seriously hindered the future development of gas hydrate, so China should establish relevant cooperation framework and intuitional arrangement to attract more investment as well as breaking through technical difficulties to make gas hydrate commercialization as soon as possible.

Surface water plays a crucial role in climate change, human production, and life, making accurate monitoring and observation of surface water particularly important. However, due to the significant diversity and complexity of water distribution in surface space, accurate mapping of surface water faces considerable challenges. When extracting water bodies from medium-resolution satellite remote sensing images, CNN methods may suffer from limitations in receptive fields and insufficient context modeling capabilities, leading to the loss of water body boundary details and poor fusion of multiscale features. Currently, there is relatively little research on this issue; therefore, it is necessary to explore new combinations of deep learning networks to address these challenges. The purpose of this study is to address the above issues. We propose a new combination of deep learning networks that fully utilize multiscale information to enhance water features. Specifically, we first combine deformable convolutions with the Swin Transformer to increase effective receptive fields while better integrating global semantic information. This combination can capture features of water bodies at different scales, improve the accuracy and integrity of water extraction, and provide reliable technical support for detailed water body extraction. We tested the newly constructed model using Sentinel-2 satellite images. Our model achieved results of over 90%, with an average accuracy of 97.89%, average precision of 94.98%, average recall of 90.05%, and an average F1 score of 92.33%. In addition, our model achieved an accuracy of 98.03% in mountainous areas. Our experiments and results validate the potential of combining the Swin Transformer and deformable convolutions in detailed water body extraction.

To handle the problem of solving the results of aircraft’s visual navigation with scene matching, this paper take the measure of the spherical EPnP positioning posture solving by measuring the central angle threshold value and approaches for constructing a measuring model. The detailed steps are as follows: firstly, this approach needs to construct a positioning coordinate model for the earth surface, makes sure the expression for the 3-dimensional coordinate of the earth surface and solves the positioning of constructing data model with EPnP positioning posture solving algo-rithm. Secondly, by contrasting and analyzing the positioning posture value of approximate plane coordinates, the critical value is acquired, which can be recognized as plane calculation. Lastly, this method should construct a theoretical model of measurement for the visual height and central angle with the decided central angle threshold value. The simulation experiment shows that the average positioning precision of taking the spherical coordinates as input is 16.42 percent way higher than taking the plane coordinates as input. When the central angle is less than 0.05 degrees and the surface district is less than 5585 square meters, the positioning precision of the plane co-ordinates is pretty much equal to the spherical coordinates. At this moment, the sphere can be seen as flat. The conclusion of this essay can theoretically guide the further study of positioning posture solving of the scene matching, which is also of vital significance for theory research and engineering application.

The availability of multiple sequenced genomes from a single species made it possible to explore intra- and inter-specific genomic comparisons at higher resolution and build clade-specific pangenomes of several crops. The pan-genomes of crops constructed from various cultivars/accessions, landraces, and wild ancestral species represent a compendium of genes and structural variations and allow researchers to search for the novel genes and alleles that were inadvertently lost in domesticated crops during the historical process of crop domestication or in the process of extensive plant breeding. Fortunately, many valuable genes and alleles associated with desirable traits like disease resistance, abiotic stress tolerance, plant architecture, and nutrition qualities exist in landraces, ancestral species, and crop wild relatives. The novels genes from the wild ancestors and landraces can be introduced back to high-yielding varieties of modern crops by implementing classical plant breeding, genomic selection, and transgenic/gene editing approaches. Thus, pan-genomic represents a great leap in plant research and offers new avenues for targeted breeding for mitigating the impact of global climate change. Here we summarize the tools used for pangenome assembly and annotations, web-portals hosting plant pangenomes. Furthermore, we highlight a few discoveries made in crops using the pan-genomic approach and its future potential.

Purpose: Acute kidney injury (AKI) is a severe symptom of the 2019 novel coronavirus disease (COVID-19), especially for patients in a critical condition.This study explored the potential mechanism of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) on AKI at the single-cell level. Methods: 15 normal human kidney samples were collected and analyzed using single-cell RNA sequencing (scRNA-seq). Subsequently, we analyzed the components and proportions of kidney cells expressing the host cellular receptor ACE2 and the key protease TMPRSSs family, and analyzed the expression differences in Occidental and Asian populations. Results: We drafted the currently available world's largest human kidney cell atlas with 42,589 cells and identified 19 clusters through unsupervised hierarchical clustering analysis. ACE2 and TMPRSSs genes were significantly co-expressed in podocytes and proximal convoluted tubules as potential host cells targeted by SARS-CoV-2. Comparative analysis showed that ACE2 expression in kidney cells was no less than that in the lung, esophagus, small intestine and colon, suggesting that the kidney may be an important target organ for SARS-CoV-2. In addition, given the high expression of ACE2 and kidney disease-related genes in Occidental donors relative to Asian donors, Occidental populations with SARS-CoV-2 infection might be a higher risk of of kidney injury.

This manuscript investigates the dispersion of cetyltrimethylammonium bromide (CTAB) treated cellulose nanocrystals (CNCs) in polypropylene (PP) by melt mixing. FTIR spectra of CTAB-modified CNCs and unmodified CNCs in a PP matrix were used to evaluate the surface treatments. The surface energies and morphologies of CTAB surface modified CNCs in polypropylene (PP) were used to interpret the effects of nanoparticle dispersion on the crystallization and rheological and mechanical properties of the PP matrix.

Locomotor impairment is a high-prevalent and significant source of disability and significantly impacts a large population’s quality of life. Despite decades of research in human locomotion, the challenges of simulating human movement to study the features of musculoskeletal drivers and clinical conditions remain. Most recent efforts in utilizing reinforcement learning (RL) techniques are promising to simulate human locomotion and reveal musculoskeletal drives. However, these simulations often failed to mimic natural human locomotion because most reinforcement strategies have yet to consider any reference data regarding human movement. To address these challenges, in this study, we designed a reward function based on the trajectory optimization rewards (TOR), and bio-inspired rewards, which includes the rewards obtained from reference motion data captured by a single Intertial Moment Unit (IMU) sensor. The sensor was equipped on the participants’ pelvis to capture reference motion data. Also, we adapted the reward function by leveraging previous research in walking simulation for TOR. The experimental results showed that the simulated agents with the modified reward function performed better in mimicking the collected IMU data from participants, which means the simulated human locomotion was more realistic. Also, as this bio-inspired defined cost, IMU data enhanced the agent’s capacity to converge during the training process. As a result, the models’ convergence is faster than those developed without reference motion data. Consequently, human locomotion can be simulated more quicker and in a broader range of environments with a better simulation performance.

The work safety standardization of enterprises based on the traditional work safety theory has played a significant role in reducing the number of accidents and improving work safety to some extent in China. However, some problems are coming with the work safety standardization of enterprises developing constantly in China. On the one hand, it is not combined with the actual situation of the enterprise, lacking pertinence and specificity, these defects resulted that it is not integrated with original safety production management system of enterprise and make it difficult to carry out. On the other hand, there is a lack of systematic management methods for the work safety management system of enterprise, most of enterprises only pay attention to the inspection result rather than the process control. This means after the check of the government, many enterprises will relax to carry out the system. This paper puts forward a new method for optimizing the standardization management mode of work safety based on the Viable System Model(VSM), which can solve the defects of work safety standardization of enterprises management system. An optimization model of work safety standardization based on VSM was construct for explaining the process optimization and control of work safety standardization management. It can improve the connectivity between the enterprise and the government. The conclusion of this paper can provide reference for achieving the development and optimization of work safety standardization of enterprises in China.

Evaporation from surface water plays a key role in water accounting of basins, water resources management, and irrigation systems management, so simulating evaporation with high accuracy is very important. In this study, two methods for simulating pan evaporation under different climatic conditions in Iran were developed. In the first method, six experimental relationships (linear, quadratic, and cubic, with two input combinations) were determined for Iran’s six climate types, inspired by a multilayer perceptron neural network (MLP-NN) neuron and optimized with the genetic algorithm. The best relationship of the six was selected for each climate type, and the results were presented in a three-dimensional graph. In the second method, the best overall relationship obtained in the first method was used as the basic relationship, and climatic correction coefficients were determined for other climate types using the genetic algorithm optimization model. Finally, the accuracy of the two methods was validated using data from 32 synoptic weather stations throughout Iran. For the first method, error tolerance diagrams and statistical coefficients showed that a quadratic experimental relationship performed best under all climatic conditions. To simplify the method, two graphs were created based on the quadratic relationship for the different climate types, with the axes of the graphs showing relative humidity and temperature, and with pan evaporation was drawn as contours. For the second method, the quadratic relationship for semi-dry conditions was selected as the basic relationship. The estimated climatic correction coefficients for other climate types lay between 0.8 and 1 for dry, semi-dry, semi-humid, Mediterranean climates, and between 0.4 and 0.6 for humid and very humid climates, indicating that one single relationship cannot be used to simulate pan evaporation for all climatic conditions in Iran. The validation results confirmed the accuracy of the two methods in simulating pan evaporation under different climatic conditions in Iran.

The damage evolution rules of coal under true triaxial combined static-dynamic loads are important to understand and reveal the mechanism of rockburst in coal mines. The numerical simulation was carried out using FLAC3D to explore the coupling effect of static and dynamic stress, especially the influence of dynamic load parameters. The results show that the increase of dynamic load amplitude not only makes the plastic zone grow exponentially and shorten the damage development time, but also decreases the residual strength of the coal sample, which leads to a much more violent of the dynamic failure. The stress wave can propagate more stable in the coal sample with the increase of dynamic load frequency and the development time of the plastic zone also show synchronous fluctuating features, and when the frequency is like the intrinsic frequency of the coal sample, the dynamic load has a significant stimulate effect. The static and dynamic loads have different damage effect to the coal sample under true triaxial stress path, the weight decreases in order of the minimum principal stress, the maximum principal, the amplitude of the dynamic load and at last the dynamic stress frequency by the entropy weight method analysis.

Focused microwave breast hyperthermia (FMBH) employs a phased antenna array to perform beamforming that can focus microwave energy at targeted breast tumors. Selective heating of the tumor endows the hyperthermia treatment with high accuracy and low side effects. The effect of FMBH is highly dependent on the applied phased antenna array. This work investigates the effect of polarizations of antenna elements on the microwave focusing results by simulations. We explore two kinds of antenna arrays with the same number of elements using different digital realistic human breast phantoms. The first array has all the elements’ polarization in the vertical plane of the breast while the second array has half elements’ polarization in the vertical plane and the other half in the transverse plane, i.e., cross polarization. In total 96 sets of different simulations are performed, and the results show that the second array leads to a better focusing effect in dense breasts than the first array. This work is very meaningful for the potential improvement of the antenna array for FMBH, which is of great significance for the future clinical applications of FMBH. The antenna array with cross polarization can also be applied in micro-wave imaging and sensing for biomedical applications.

In this paper, we synthesized MC(BeA-co-MMA) copolymer microcapsules through suspension polymerization. The pendent n-behenyl group of BeA is highly crystalline, and it acts as the side-chain in the structure of BeA-co-MMA copolymer. The highly crystalline n-behenyl side-chain provides BeA-co-MMA copolymer thermal-energy-storage capacity. In order to investigate the correlation between thermal properties and crystal structure of BeA-co-MMA copolymer, the effects of monomer ratio, temperature changing and changing rate, as well as synthesis method were discussed. The monomer ratio influenced crystal transition behavior and thermal properties greatly. The DSC results proved that when the monomer ratio of BeA and MMA was 3:1, MC(BeA-co-MMA)3 showed the highest average phase change enthalpy ΔH (105.1 J·g–1). It indicated that the n-behenyl side-chain formed relatively perfect crystal region, which ensured a high energy storage capacity of copolymer. All the DSC and SAXS results proved that the amount of BeA had a strong effect on the thermal-energy-storage capacity of copolymer and the long spacing of crystals, but barely on the crystal lamella. It was found that MMA units worked like defects in the n-behenyl side-chain crystal structure of BeA-co-MMA copolymer. Therefore, a lower fraction of MMA, that is, a higher fraction of BeA contributed to a higher crystallinity of BeA-co-MMA copolymer for providing a better energy storage capacity and thermoregulation property. ST(BeA-co-MMA) copolymer sheets with the same ingredients as microcapsules were also prepared through light-induced polymerization aiming at clarifying the effect of synthesis method. The results proved that synthesis method mainly influenced the copolymer chemical component, but lightly on the crystal packing of n-behenyl side-chain.

Inclusive and sustainable development has become an important part of China's sustainable development agenda, the self-recovery and stability of China's economy cannot be achieved without the macro-governance of the government. Figuring out the internal logic of digital finance and economic resilience is an important part of effective government governance. Based on the panel data of 193 counties in five provinces in northwest China from 2014 to 2021, the paper tested digital finance and county-level economic resilience by using two-way fixed-effect model, intermediary-effect model and threshold-effect model, to test whether financial development promotes government governance in underdeveloped regions. The results prove that digital inclusive finance significantly enhances the resilience of county economies by improving capital allocation efficiency, stimulating entrepreneurship and employment, and reducing pollution emissions. In addition, there are dual threshold effects between capital allocation efficiency and employment vitality, in which capital allocation efficiency has a gradually increasing threshold effect, and entrepreneurship and employment vitality have a fluctuating increasing threshold effect. Therefore, "Digital inclusive finance" in underdeveloped regions is an indispensable part of financial globalization；promoting the healthy development of digital finance is the basis and premise for providing a good financial environment for government management; deepening the reform in the financial field and promoting the green and sustainable development of finance are the future trend and direction of efforts.

With the rapid development of Internet of Vehicles (IoV), particularly the introduction of mobile edge computing (MEC), vehicles can efficiently share data with one another. However, edge computing nodes are vulnerable to various network attacks, posing security risks to data storage and sharing. Moreover, the presence of abnormal vehicles during the sharing process poses significant security threats to the entire network. To address these issues, this paper proposes a novel reputation management scheme, which proposes an improved multi-source multi-weight subjective logic algorithm. This algorithm fuses direct and indirect opinion feedback of nodes through the subjective logic trust model while considering factors such as event validity, familiarity, timeliness, and trajectory similarity. Vehicle reputation values are periodically updated, and abnormal vehicles are identified through reputation thresholds. Finally, blockchain technology is employed to ensure the security of data storage and sharing. By analyzing real vehicle trajectory datasets, the algorithm is proven to effectively improve the differentiation and detection rate of abnormal vehicles.

This research examines how rainfall and mining affect the slope damage resulting from the transition from open-pit mining to underground mining. Using unmanned aerial vehicle (UAV), the Huangniu slope of Dexing Copper Mine was fully characterized, and experiments were conducted on rock samples from appropriate sites. First, the mechanical properties of the samples were measured. Then, the parameters of the similarity simulation experiments were derived based on the similarity theory. Subsequently, the rainfall, rock slope, data acquisition and monitoring systems were designed. Finally, the rock mass failure with different slope angles was analyzed, and the deformation and damage patterns under the coupling effect were obtained. The results show that rainfall increases pore water pressure and moisture content. Rainfall and slope-slip water have more impact on the open-pit platform. The pore water pressure values on the upper rock mass rise faster than inside. In the open-pit mining stage, the rock mass shifts slightly to the upper left. In the room mining stage, vertical fractures and goaf sinking occur. The fractures above the mine room form a semi-ellipse. In the pillar mining stage, the overlying rock displacement is evident, and fractures persist. In the continuous pillar mining stage, the overlying rock collapses massively. The 65° slope model is the most damaged, while the 55° slope model is the least damaged. The results also suggest that the UAV guides sample selection.

This study investigated the phenolic compounds of 15 Chrysanthemum morifolium Ramat cv. ‘Hangbaiju’, including 6 ‘Duoju’ and 9 ‘Taiju’ using high performance liquid chromatography. The antioxidant activities of these ‘Hangbaiju’ were estimated by DPPH, ABTS and FPAR assays. Results showed that a total of 14 phenolic compounds were detected in these flowers, including 3 mono-caffeoylquinic acids, 3 di-caffeoylquinic acids, 1 phenolic acid and 7 flavonoids. ‘Duoju’ and ‘Taiju’ possessed different concentration of phenolic compounds, and ‘Taiju’ exhibited higher caffeoylquinic acids and stronger antioxidant activities than ‘Duoju’. Caffeoylquinic acids showed a strong correlation with the antioxidant activities of the samples. Principal component analysis revealed an obvious separation between ‘Duoju’ and ‘Taiju’ using phenolic compounds as variables. Apigenin-7-O-glucoside, 3,5-di-O-caffeoylquinic acid, luteolin and acacetin were found to be the key phenolic compounds to differentiate ‘Duoju’ from ‘Taiju’.

The tailoring of the surface properties of cellulose nanocrystals (CNCs) to meet various requirements in environmental, food, and material areas has always been of great interest. In this study, the surface chemistry of CNCs was noncovalently modified by cetyltrimethylammonium bromide (CTAB), followed by characterizations and an application as a coating material for interfacial interaction investigation over various substrates. Due to the CTAB modification, the surface charge of the CNCs was neutralized, resulting in an increased size of each nanocrystal at the aqueous status and the aggregated microfibers when dried up. The CTAB modification not only decreased the crystallinity of the samples from 48.57% to 9.12% but also hydrophobized the CNCs and decreased their total surface energy. Finally, the adsorption behavior of the CNCs and CTAB-CNCs over nonionic, anionic, and cationic polymers was investigated by ellipsometry. Based on the thickness of the CNC and CTAB-CNC layers over 2-Hydroxyethyl cellulose (HEC), carboxymethyl cellulose (CMC), and polyethyleneimine (PEI), we proposed that the adsorption behavior was overall influenced by electrostatic interaction, hydrogen bonding, and van der Waals forces and the thickness of the adsorbed layers could be impacted by both the surface charge and the size of the crystals.

Climate change represents a prevalent challenge confronted by humanity, and with cities being one of the regions most heavily impacted by such change, enhancing their climate resilience is paramount in adapting to and mitigating the associated risks and losses. This article evaluates the climate resilience of 270 major cities in China by creating an urban climate resilience indicator system centered on exposure, vulnerability, and resilience. The article analyses the spatial and temporal evolution trend of climate resilience in Chinese cities, as well as the source of regional differences using Kernel density analysis and the Dagum Gini coefficient decomposition. The article then explores the influence of financial investments on urban climate resilience, considering the moderating effect of urbanization rate.

This paper reviews the requirements for the production, quality, and quality assurance of solid recovered fuels (SRF) that are increasingly used for the substitution of fossil fuels in the indus-trial utilities. The economical, technological and environmental aspects should be considered before using SRF as an alternative fuel. In general, the most important factors determining the commercial production of SRF referred to the calorific values and their available amounts adopted in the starting materials. Furthermore, the low-melting impurities and undesired constituents/elements, including chlorine, sulfur, potassium and sodium, may pose negative impacts on air pollutant emission and slagging & fouling in the process utilities. In this regard, the vent emitted from the industrial utilities must comply with the effluent standards of station-ary sources like particulate, sulfur oxides, nitrogen oxides, heavy metals (e.g., lead, cadmium, and mercury) and dioxins. For these reasons, this work will summarize the legal or regulatory requirements under development in Asian countries (i.e., Japan, South Korea, and Taiwan) and European Union (EU). Finally, the outlook of solid recovered fuel (SRF) in the waste manage-ment and industrial sectors will be addressed to echo the sustainable development goals (SDGs).

In the ground-based infrared optical remote sensing system, the target signal is very weak due to the dynamic strong light background and the movement of small and small targets. In order to improve the limit detection capability, the background suppression and target enhancement methods are required to be more suitable for this scene. To solve this problem, we first analyze the image features in the current scene, and propose a more perfect point target and noise model. Then, we propose a new WY distribution function based on the Fermi Dirac distribution function, and propose an anisotropic filtering method based on this function, and further suppress the back-ground through the difference results of two steps. Then, based on the distribution function, we further designed an energy concentration accumulation strategy in 9 scale directions, through which the SNR of the target is effectively improved and the suppression ability of the background is enhanced. Through quantitative and qualitative experimental analysis, compared with the same type of algorithms, the proposed method has better robustness against extremely weak targets and dynamic backgrounds.

Hepatocellular carcinoma (HCC) is characterized by uncontrolled cellular proliferation driven by aberrant signal transduction. Cells respond to potential carcinogenic signals by inducing cellular senescence (CS) as a defense mechanism. However, assessing CS levels in various tumors is challenging due to heterogeneity and the lack of universal CS markers. This study integrates single-cell RNA sequencing (scRNA-seq) and bulk RNA-seq data from HCC samples to analyze gene expression profiles. HCC-specific senescence-related pathways are identified, and genes from these pathways distinguish molecular subtypes associated with senescence in HCC. These subtypes exhibit significant variations in biological and clinical attributes. A specific CS risk model is developed, revealing associations between CS scores and prognosis, clinical staging, immune infiltration, immunotherapy response, and drug sensitivity. The key gene G6PD is identified as a potential senescence-related target in liver cancer. Molecular experiments confirm the effective suppression of HepG2 cell proliferation, invasion, and migration upon G6PD knockdown. In summary, this analysis enhances our understanding of HCC-specific senescence molecular features and introduces a novel senescence-related biomarker, offering promising implications for future research.

Open-vocabulary learning has recently gained prominence as a means to enable image segmentation for arbitrary categories based on textual descriptions. This advancement has extended the applicability of segmentation systems to a broader range of generally purpose scenarios. However, current methods often revolve around specialized architectures and parameters tailored to specific segmentation tasks, resulting in a fragmented landscape of segmentation models. In response to these challenges, we introduce OVAMTSeg, a versatile framework designed for Open-Vocabulary and Multitask Image Segmentation. OVAMTSeg harnesses adaptive prompt learning to empower the model to capture category-sensitive concepts, enhancing its robustness across diverse multi-task and scenario contexts. Text prompts are employed to effectively capture semantic and contextual features of the text, while cross-attention and cross-modal interactions enable the fusion of image and text features. Furthermore, a transformer-based decoder is incorporated for dense prediction. Extensive experimental results underscore the effectiveness of OVAMTSeg, showcasing its state-of-the-art performance and superior generalization capabilities across three segmentation tasks. Notable achievements include a 47.5 mIoU in referring expression segmentation, 51.6 mIoU on Pascal-VOC with four unseen classes, 46.6 mIoU on Pascal-Context in zero-shot segmentation, 65.9 mIoU on Pascal-5i, and 35.7 mIoU on COCO-20i datasets for one-shot segmentation.

Probiotics, known for regulating gut microbiota, may aid those with overweight or obesity, but their mechanisms require more research. This study involved 75 overweight or obese young adults, randomly assigned to either a Bifidobacterium brevis BBr60 group or a placebo group. Both groups received diet guidance and took either BBr60 (1×1010 CFU/day) or a placebo for 12 weeks. Re-searchers analyzed body composition, serum glucose, lipids, liver and kidney function, comprehensive metabolome, and intestinal homeostasis before and after the intervention. After 12 weeks, BBr60 significantly reduced weight and BMI compared to pre-treatment levels and outperformed the placebo. The BBr60 group also showed improved blood biochemistry, with notably lower fasting blood glucose (FBG) levels than the placebo group (p < 0.05). Additionally, BBr60 influenced vital serum and fecal metabolites related to three amino acid metabolic pathways and regulated the bacteria Dialister, Klebsiella, and Bacteroides, which correlated strongly with serum metabolites. These findings indicate that BBr60 can safely and effectively regulating BMI, body weight, serum glucose, lipids, and liver function markers, which may involve BBr60's impact on key gut bacteria, which influence metabolites related to the valine, leucine, and isoleucine biosynthesis; glycine, serine, and threonine metabolism; and alanine, aspartate, and glutamate metabolism.

The security of several full homomorphic encryption (FHE) schemes depends on the hardness of the approximate common divisor (ACD) problem. The analysis of attack and defense against the system is one of the frontiers of cryptography research. In this paper, the performance of existing algorithms, including orthogonal lattice, simultaneous diophantine approximation, multivariate polynomial and sample pre-processing are reviewed and analyzed for solving the ACD problem. Orthogonal lattice (OL) algorithms are divided into two categories (OL-$\land$ and OL-$\vee$) for the first time. And an improved algorithm of OL-$\vee$ is presented to solve the GACD problem. This new algorithm works well in polynomial time if the parameter satisfies certain conditions. Compared with Ding and Tao's OL algorithm, the lattice reduction algorithm is used only once, and when the error vector $\mathbf{r}$ is recovered in Ding et al.'s OL algorithm, the possible difference between the restored and the true value of $p$ is given. It is helpful to expand the scope of OL attacks.

Melatonin, a naturally occurring chemical, has pleiotropic effects across various species. It plays a vital role in animals by regulating the body clock, while in plants, it is known to resist aging. Melatonin is associated with various plant physiological processes, including stress response, plant growth, and flowering time. It has prospects in enhancing and promoting plant growth and development, as well as in strengthening crop yield and increasing sustainability in agriculture. This review summarized the potential roles of melatonin in several plant species, as well as its biosynthetic modes. In addition, we described the recently uncovered melatonin features in plants, summarized the issues and challenges facing plant melatonin research and some feasible solution ideas are proposed.

To address three important issues related to extraction of water features from Landsat imagery, i.e., selection of water indexes and classification algorithms for image classification, collection of ground truth data for accuracy assessment, this study applied four sets (ultra-blue, blue, green, and red light based) of water indexes (NWDI, MNDWI, MNDWI2, AWEI_ns, and AWEI_s) combined with three types of image classification methods (zero-water index threshold, Otsu, and kNN) to 24 selected lakes across the globe to extract water features from Landsat-8 OLI imagery. 1440 (4x5x3x24) image classification results were compared with the extracted water features from high resolution Google Earth images with the same (or ±1 day) acquisition dates through computing the Kappa coefficients. Results show the kNN method is better than the Otsu method, and the Otsu method is better than the zero-water index threshold method. If the computational cost is not an issue, the kNN method combined with the ultra-blue light based AWEI_ns is the best method for extracting water features from Landsat imagery because it produced the highest Kappa coefficients. If the computational cost is taken into account, the Otsu method is a good choice. AWEI_ns and AWEI_s are better than NDWI, MNDWI and MNDWI2. AWEI_ns works better than AWEI_s under the Otsu method, and the average rank of the image classification accuracy from high to low is the ultra-blue, blue, green, and red light-based AWEI_ns.

Background: Boron Neutron Capture Therapy (BNCT) is an emerging radiotherapy. There are ongoing efforts to develop a Canadian accelerator-based BNCT center. However, it remains unclear how Canadian radiation oncologists (RO), medical physicists (MP), and their trainees perceive BNCT and its impact on radiation oncology as a discipline. Methods: A survey was created to explore knowledge of BNCT, its clinical role, and support for Canadian research. It was distributed through the Canadian Association of Radiation Oncology (CARO) and Canadian Organization of Medical Physicists (COMP). Results: We received 118 valid responses from all 10 provinces, from 70 RO (59.3%) and 48 MP (40.7%), including 9 residents. Most knew of BNCT and its indications (60.2%). Although many were unaware of reasons behind early failures (44.1%), common reasons were lack of clinical trials and inaccessibility of neutron sources (42.4%) and reactor unsuitability (34.7%). Additionally, 90.6% showed definite (66.9%) or possible (23.7%) support for Canadian BNCT research, while 89% indicated definite (56.8%) or possible (32.2%) willingness for BNCT referrals. Conclusions: Most RO and MP supported Canadian BNCT research and would refer patients. However, limited awareness and lack of experiences remain a challenge. Educational sessions are needed to realize this innovative cancer treatment in Canada.

To date, viral RNA detection is almost the only way to confirm SARS-CoV-2infectionin practice.However, variousreasons can cause low sensitivity for RNA detection, and thisposes aserious challenge to disease control. We tested the performance of detecting total antibody(Ab) and IgM levels in serum by the methods of chemiluminescence, enzyme-linked immunosorbent assay (ELISA), and colloidal golddetection. The datashowed that the sensitivity and specificity for detecting total Ab and IgM levels were high by all three methods, and the sensitivity was higher for detecting total Ab than for detecting IgM. Evidence from studieshas shown thatviral RNA testingcombinedwith serological testing could increase the diagnostic sensitivity while maintaining a high specificity. Specific serology testsfor SARS-CoV-2 havegreat value for clinical practice and public health.

The increasing use of whole-body computed tomography (WBCT) examinations, also known as panCT, in emergency departments for trauma patients has raised concerns about potential over-use and the associated risk of unnecessary radiation exposure. The purpose of this study was to examine the utilization patterns and findings of panCT scans performed over one year at a major academic hospital. This retrospective cohort study included 599 trauma patients (adults and pe-diatrics) who underwent panCT scans in 2023. De-identified data for each patient, including the radiology report, age, gender, and dose-length product (DLP), were retrieved and reviewed. Ra-diology reports were classified as negative (no acute traumatic injuries) or positive, with posi-tive cases further subclassified based on injury location. Injury severity scores (ISS) were also calculated based on the findings of the radiology reports. Statistical analysis was performed us-ing Python programming language to assess predictors of report findings. Overall, 56% of panCT scans were negative. Logistic regression showed that age significantly impacted the like-lihood of negative findings (p=0.009), while gender did not (p=0.182). One-third of positive cases showed injuries either in head and neck (H&N) or chest-abdomen-pelvis (CAP) regions. Most cases (70% adults, 65% pediatrics) had an ISS between 1 and 8. Median DLP values were 2264 mGy.cm in pediatrics and 2666 mGy.cm in adults. The study showed a high rate of negative panCT scans, suggesting potential overuse of panCT. These findings highlight the need for more selective CT imaging approaches, evidence-based guidelines, and decision-support tools to promote appropriate utilization of panCT scans, reducing unnecessary radiation exposure while ensuring high-risk patients receive appropriate imaging.

Dolomite is a common type of natural soluble rock. The strength of rock decreases under the action of corrosion, which has a significant impact on the self-stability and long-term safety of the tunnel surrounding the rock. To reveal the microscopic structure evolution and strength-damage law of carbonate rock caused by corrosion, chemical corrosion, rock uniaxial compression, and electron microscope scanning tests are conducted at different pH values on the dolomite of the Doushantuo Formation. The rock dissolution at different pH values exhibits four typical stages: the initial dissolution stage, secondary dissolution acceleration stage, stable dissolution rate stage, and dissolution attenuation stage. During the dissolution process, the initial dissolution rate is 25.91 times that of the stable stage, and the maximum strength attenuation is 76.2% after 21 days of dissolution. For macroscopic failure, the rock is developed from 1 to 2 external fractures to multiple internal and external fractures and penetrated, and the specimen transforms from brittle to flexible. For microstructure, the sample exhibits corrosion characteristics along the joint surface, intensified corrosion at the edge, etc. The porosity increase rate is 0.6%/d; however, the length–width ratio of the pores is maintained at 1.7–1.85, indicating that the development rate of pores in different directions is similar. The results of this study have enriched the study of the dolomite dissolution mechanism and have important reference value for the stability evaluation of tunnel surrounding rock in karst environments.

Dielectric elastomer actuators (DEAs) offer robust, high energy density solutions for soft robotics. The proposed end effector consists of three spring roll configuration DEAs, each acting as a robotic finger, using a 3M VHB-F9473PC adhesive membrane. The lateral force, bending angle and response time of the actuator are measured experimentally and compared with the predictions of an analytical model. The cylindrical actuator measures 70 mm in length and 15 mm in diameter and achieved a lateral force of 30 mN, a bending angle of 6.8 ° and a response time of ≈ 1 s. Spring roll configuration DEAs are shown to reduce the effects of viscoelasticity seen in the membrane, making the actuator more controllable at higher voltages. The dielectric constant of the membrane is shown to be a limiting factor of actuation, with a decrease in dielectric constant resulting in larger actuation. The end effector successfully gripped numerous light objects for extended periods, showing the applicability of spring roll DEAs for soft end effectors.

The purpose of this study is to investigate and validate the influencing factors of audiences’ attitude toward virtual concerts. To address this issue, the current study proposes a conceptual model integrating player experiences’ factors (autonomy, relatedness, and engagement) and the technology acceptance model (perceived usefulness, perceived ease of use, and perceived enjoyment). An online questionnaire on virtual concert experiences was distributed to Chinese audiences who had attended virtual concerts. Structural equation modeling was then used to establish the relationship between variables. The results suggested autonomy, relatedness and engagement positively impacted perceived usefulness, perceived ease of use, and perceived enjoyment. Furthermore, the perceived usefulness, perceived ease of use, and perceived enjoyment were significant predictors of audiences’ attitude. The findings of this study can provide a reference for relevant virtual entertainment providers and can also serve as a point of development and exploration for technology acceptance model and player experience in the field of virtual concerts.

With the continuous improvement of people's quality of life and aesthetics, furniture products have higher requirements. Excellent solid wood chairs are the most representative products in furniture to enhance space and taste and whose design may significantly impact consumers' emo-tional experience and purchase decisions. This study aims to evaluate how the modeling imagery of solid wood chairs affects user preferences and emotional experiences. The development of the current era is inseparable from the analysis of big data. Firstly, a representative sample was ob-tained by multidimensional scaling (MDS), and the sample was analyzed and evaluated by fac-tor analysis. Moreover, five groups of adjective vocabulary were selected to describe the model-ing imagery of solid wood chairs, such as "balanced and coordinated", "unique and novel", "prac-tical and simple", "quality and detailed" and "traditional and plain". Further, the triangular fuzzy theory was applied to analyze and discuss the 12 types of solid wood chairs in the five groups of adjective vocabulary. Then the study verified that the differences in the evaluations of the 12 sam-ples in the "unique and novel" and "quality and detailed" groups were significant, but more minor differences in the groups of "traditional and plain", "balanced and coordinated" and "practical and simple". Through comprehensive comparison, five groups with similar modeling imagery were created, and solid wood chairs with different modeling imagery should be placed in suita-ble spaces. According to the results of this study, the evaluation of the modeling imagery of solid wood chairs can not only rely on subjective judgments but can be reasonably described through data analysis and mathematical algorithms. It can scientifically and effectively reflect the poten-tial perception needs of consumers on the modeling imagery of solid wood chairs, as well as help to improve the design efficiency of the furniture product development stage.

Modified ammonium polyphosphate (MAPP) as a novel mono-component intumescent flame retardant (IFR) was prepared via the ionic exchange between ammonium polyphosphate (APP) and piperazine sulfonate, which is synthesized by self-assembly using 1-(2-Amioethyl) piperazine (AEP) and p-amino benzene sulfonic acid (ASC) as raw materials. This all-in-one IFR integrating three functional elements (carbon, acid, and gas source) showed more efficient flame retardancy and excellent smoke suppression as well as better mechanical properties than the conventional APP. The incorporation of 22.5 wt.% MAPP into polypropylene (PP) eliminated the melt dripping phenomenon and passed the UL-94 V-0 rating. The results of the cone calorimetry test (CCT) revealed that the release of heat, smoke, and CO is significantly decreased, demonstrating that this novel IFR endows PP with excellent fire safety more effectively. For PP/MAPP composites, a possible IFR mechanism was proposed based on the analysis of the pyrolysis gas and char residues.

The switched inertance hydraulic system (SIHS) is a novel high-bandwidth and energy-efficient digital device which can adjust or control flow and pressure by a means that does not rely on throttling the flow and dissipation of power. An SIHS can provide an efficient step-up or step-down of pressure or flow rate by using a digital control signal. In this article, analytical models of an SIHS in a four-port high-speed switching valve configuration are proposed, and the system dynamics and performance are investigated theoretically and experimentally. The flow responses, system characteristics and power consumption can be predicted effectively and accurately by using the proposed models, which were validated by comparing with experiments and with numerical simulation. The four-port configuration is compared with the three-port configuration, and it is concluded that the former one is less efficient for valves of the same size, but provides a bi-direction control capability. As bi-direction control is a common requirement, this constitutes an important contribution to the development of efficient digital hydraulics.