Glycine in its neutral form can exist in the gas phase while its zwitterion form is more stable in water solution.But how many waters are actually necessary to stabilize the zwitterionic structure in the gas phase? Are the intramolecular isotropic spin spin coupling constants sensitive enough to accuse the change in the environment? or the conformer observed? These and related questions have been investigated by a computational study at the level of density functional theory employing the B3LYP functional and the 6-31++G**-J basis set. We found that at least two water molecules explicitly accounted in the super-molecule structure are necessary to stabilize both conformers of glycine within a water polarizable continuum model. At least half of the SSCC’s of both conformers are very stable to changes in the environment and at least four of them differ significantly between Neutral and Zwitterion conformation.

Gold nanoparticles (AuNPs) are currently under intense investigation for biomedical and biotechnology applications, thanks to their ease in preparation, stability, biocompatibility, multiple surface functionalities and size-dependent optical properties. The most commonly used method for AuNPs synthesis in aqueous solution is the reduction of tetrachloroauric acid (HAuCl₄) with trisodium citrate. We observed variations in the pH and concentration of the gold colloidal suspension synthesized under standard conditions, verifying a reduction in the reaction yield by around 46% from pH 5.3 (2.4 nM) to pH 4.7 (1.29 nM). Citrate-capped AuNPs were characterized by UV-visible spectroscopy, TEM, EDS and zeta-potential measurements, revealing a linear correlation between pH and the concentration of the generated AuNPs. This result can be attributed to the adverse effect of protons both on citrate oxidation and on citrate adsorption onto the gold surface, which is required to form the stabilization layer. Overall, this study provides insight into the effect of the pH over the synthesis performance of the method, which would be of particular interest from the point of view of large-scale manufacturing processes.

The bloom-forming toxic dinoflagellate Alexandrium catenella was first detected in Southern Chile (39.5–55°S) 50 years ago and is responsible for most of the area’s cases of paralytic shellfish poisoning (PSP). Given the complex life history of A. catenella, which includes benthic sexual cysts, in this study we examined the potential link between latitude, toxicity, and sexual compatibility. Nine clones isolated from Chilean Patagonia were used in self- and out-crosses in all possible combinations (n=45). The effect of latitude on toxicity, reproductive success indexes, and cyst production was also determined. Although the toxin profiles were similar for all strains, consisting of C1, C2, GTX4, GTX1, GTX3, and NeoSTX, a latitudinal gradient was determined for their proportions (%) and content per cell (pg cell⁻¹), with the more toxic strains occurring in the north (−40.6°S). Reproductive success also showed a latitudinal tendency and was lower in the north. None of the self-crosses yielded resting cysts. Rather, the production of resting cysts was highest in pairings of clones separated by distances of 1000–1650km. Our results contribute to a better understanding of PSP outbreaks in the region and demonstrate the importance of resting cysts in fueling new toxic events. They also provide additional evidence that the introduction of strains from neighboring regions is a cause for concern.

Background: Sexually transmitted infections and pregnancy in adolescents are acknowledged public health problems in many countries. Although it is known that the proper use of condoms allows avoiding these health problems, their use in Chile is still limited, for unknown reasons. Objective: Based on planned behavioural theory, the aim was to validate a behaviour model regarding condom use by measuring the influence of the variables that predict this use among Chilean university students. Methods: A cross-sectional descriptive study was carried out in October 2016 among 151 Chilean university students belonging to the health and engineering areas. The information was collected through a self-administered survey. The sample was divided into two groups: stable and not stable relationships. Partial least squares (PLS) regression was used for the analysis. Results: It was possible to explain the condom use of the students by 57%. The attitude was the main variable related to the intention of using condoms, together with the perceived behavioural control. Additionally, there are statistically significant differences in the variables that predict condom use among students with stable relations compared to those without a stable relationship. Conclusions: The planned behavioural theory is useful for predicting condom use behaviour when students have a stable partner.

In this work, we report the magnetocaloric effect (MCE) in a quantum dot corresponding to an electron interacting with an antidot, under the effect of an Aharonov-Bohm flux subjected to a parabolic confinement potential. We use the Bogachek and Landman model, which additionally allows the study of quantum dots with Fock-Darwin energy levels for vanishing antidot radius and flux. We find that the Aharonov-Bohm flux (AB-flux) strongly controls the oscillatory behaviour of the MCE, thus acting as a control parameter for the cooling or heating of the magnetocaloric effect. We propose a way to detect AB-flux by measuring temperature differences.

We present the case of a 35-year-old male with first degree family history of gastric cancer (father diagnosed at the age of 45), that was presumed to have gastric cancer himself when evaluating the features of his upper endoscopy performed after hematemesis. Surprisingly, no cancer cells were found in the biopsies. Thanks to a different diagnostic suspicion subsequent to performing a full clinical history, a more favorable diagnosis was reached: gastric syphilis.

Polymyalgia rheumatica (PMR) is an inflammatory disease common in people aged 50 years and older. This condition is characterized by the presence of pain and stiffness involving mainly the shoulder and pelvic girdle. Besides the frequent association with giant cell arteritis (GCA), several conditions may mimic PMR or present with PMR features. Since the diagnosis is basically clinical, an adequate diagnosis of this condition is usually required. Positron emission tomography-computed tomography (PET-CT) has proved to be a useful tool for the diagnosis of PMR. The use of 18F-FDG-PET imaging appears promising as it provides detailed information on inflammatory activity that may not be evident with traditional methods. However, since PET-CT is not strictly necessary for the diagnosis of PMR, clinicians should consider several situations in which this imaging technique can be used in patients with suspected PMR.

The Region of Arica and Parinacota is characterized as an agricultural region located in Atacama Desert at the extreme north of Chile. Its agriculture has allow developing the economy of pre- and post-Hispanic communities, which have been settled since colonial times at different locations in the region. This article is focused on how Aymara communities of Lluta Valley and Precordillera of Arica and Parinacota Region have been included as part of Chilean population, particularly, from social and economic point of view. Furthermore, a characterization of agronomic aspects of the main towns of this zone, and commercialization of agricultural and livestock is included. It must be considered that the evolution of this region would have an important impact in the safeguard on endemic flora and fauna so that it is imperative to protect the genetic heritage of local species and to promote new technologies which allow the production of commercial products from Arica and Parinacota Region.

In searching for compounds with antioxidant and antifungal activity, our study focused on the subshrub species Empetrum rubrum Vahl ex Willd. (Ericaceae), commonly known as Brecillo or Murtilla de Magallanes. We measured the antioxidant activity of its methanolic extract (MEE) obtained from the aerial parts (leaves and stems). The antioxidant activity of MEE was evaluated in vitro by 2,2-Diphenyl-1-picrylhydrazyl (DPPH) free radical and 2,2′-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) cationic radical. Results were expressed in gallic acid and Trolox equivalents for DPPH and ABTS assays, respectively. The antioxidant activities, for the DPPH and ABTS assays, were also calculated as an inhibitory concentration of extract needed to inhibit 50% of the absorbance (IC50 value). The results of IC50 values measured by the DPPH and ABTS methods were 0.4145 mg mL-1 and 0.1081 mg mL-1, respectively. In relation to the antioxidant activity, the total phenolic content (TPC) in MEE was determined by the Folin-Ciocalteu method, and the presence of secondary metabolites groups, including phenolic compounds, was determined by using different standardized test procedures. Phenolic compounds contained in leaves, stems, and fruits of E. rubrum were determined qualitatively by means of high-performance liquid chromatography coupled with mass spectrometry (HPLC-MS) analysis. The antifungal activity of MEE obtained from aerial parts of E. rubrum was tested against Rhizoctonia solani. In vitro, mycelial growth of this fungus was reduced from 90% to 100% in the presence of MEE.

Background: Cancer therapy-related cardiac dysfunction (CTRCD) is a growing concern for public health, with a growing incidence due to improved survival rates for patients with hematological malignancies due to diagnostic and therapeutic advances. Identification of patients at risk CTRCD is vital to develop preventive strategies. Methods: A single-center retrospective cohort study was conducted between 1 January 2017 and 15 February 2023. Medical records of patients with lymphoma treated with first-line anthracyclines were reviewed. Demographic data, cardiovascular risk factors, biomarkers of myocardial damage and echocardiographic information were collected. Results: A total of 200 patients were included. The incidence of CTRCD was 17.4 % (35/200). Patients with CTRCD were older than those without CTRCD, with a mean age of 65.17 years vs 56.77 (p = 0.008). Dyslipidemia (DL) (31.4% vs 13.4% p = 0.017) and previous cardiovascular disease (40% vs 13.3%, p< 0.001) were more frequent in the group who developed an event. Mean baseline NT-proBNP levels in the subgroup with cardiovascular events were 388.73 kg /L ± 101.02, and 251.518 kg /L ± 26.22 in those who did not (p = 0.004). Differences in Troponin I levels were identified during and after treatment without exceeding the laboratory’s upper reference limit. Patients were followed for a median of 51.83 months (0.76-73.49). The presence of a CTCRD event had a negative impact on overall mortality from any cause (HR = 2.23 (95% CI 1.08-2.93), p = 0.031). Conclusions: Early identification of risk factors is crucial to manage patients at risk for CTRCD.

Blueberry (Vaccinium spp.) has been recognized worldwide as a valuable source of health-promoting compounds, becoming a crop with some of the fastest rising consumer demand trends. Fruit firmness is a key target for blueberry breeding as it directly affects fruit quality, consumer preference, transportability, shelf life, and the ability of cultivars to be machine harvested. Fruit softening naturally occurs during berry development, maturation, and postharvest ripening. However, some genotypes are better at retaining firmness than others, and some are crispy, which is a putatively extra-firmness phenotype that provides a distinct eating experience. In this review, we summarized important studies addressing the firmness trait in blueberry, focusing on physiological and molecular changes affecting this trait at the onset of ripening and also the genetic basis of firmness variation across individuals. New insights into these topics were also achieved by using previously available data and historical records from the blueberry breeding program at the University of Florida. The complex quantitative nature of firmness in an autopolyploid species such as blueberry imposes additional challenges for the implementation of molecular techniques in breeding. However, we highlighted some recent genomics-based studies and the potential of a QTL mapping analysis and genome editing protocols such as CRISPR to further assist and accelerate the breeding process for this important trait.

The Galápagos archipelago is a vast reservoir of terrestrial and marine biodiversity and is particularly susceptible to human, animal, and environmental impacts. Climate change, globalization, and the blurring of human-domestic animal-wildlife interfaces are poised to bring new threats and challenges to the region. A One Health perspective that simultaneously considers human, animal, and environmental health is imperative in assessing and mitigating the challenges facing the Galápagos Islands. Many challenges facing biodiversity in the Galápagos Islands can ultimately be linked to anthropogenic factors. In Part I of this review, we reviewed the impacts of invasive species and identified infectious diseases of importance. In Part II of this review, we discuss the impacts of climate change and ocean acidification, and highlight the effects of several direct human activities, including tourism, overfishing, pollution, land use, and human-wildlife conflict. We also review the socioeconomic and political context of the Galápagos Islands, including current challenges in water and energy use, sanitation, and economic stability. We examine the importance of investment in local development for building resiliency and sustainability in the archipelago. Finally, we discuss the impact of the COVID-19 pandemic in the region. Throughout this two-part review, we build a cohesive picture of One Health in the Galápagos Islands by integrating past work, current needs, and emerging threats. We also consider overarching goals for conservation, ecosystem management, and socioeconomic sustainability that have been previously defined by both governmental and non-governmental stakeholders, and identify discrete, implementable, and interdisciplinary recommendations that will facilitate achievement of those goals.

The Galápagos archipelago is a vast reservoir of terrestrial and marine biodiversity, owing in large part to its relatively recent volcanic genesis and colonization by humans. This unique ecological system is particularly susceptible to human, animal, and environmental impacts. Climate change, globalization, and the blurring of human-domestic animal-wildlife interfaces are poised to bring new threats and challenges to the region. A One Health perspective that simultaneously considers human, animal, and environmental health is imperative in assessing and mitigating the challenges facing the Galápagos Islands.In Part I of this review, we provide the historical context for biodiversity in the archipelago; discuss the role of invasive species in habitat destruction, fragmentation, and competition with endemic species; and summarize the established and emerging infectious disease threats. We also discuss the imperative to implement research, surveillance, and preventative measures to identify and manage future threats from a One Health perspective, with a specific emphasis on implications for wildlife health. In Part II, we outline the socioeconomic context of life in the Galápagos Islands, evaluate the current and predicted effects of climate change, and discuss direct anthropogenic factors affecting Galápagos biodiversity, such as tourism, fishing, pollution, and the illegal wildlife trade. We also examine the impact of the COVID-19 pandemic in the region. Throughout this two-part review, we build a cohesive picture of One Health in the Galápagos Islands by integrating past work, current needs, and emerging threats. We also consider overarching goals for conservation, ecosystem management, and socioeconomic sustainability that have been previously defined by both governmental and non-governmental stakeholders, and we identify discrete, implementable, and interdisciplinary recommendations that will facilitate achievement of those goals.

The rapid ageing of populations around the World is creating complex challenges for national governments. The establishment of sustainable and equitable long-term care systems for old and dependent people is one of the main issues of social policy in developed countries. The aim of this work is to define a cost model for residential and day care centres for dependent persons in Cantabria (Spain). The cost model will make it possible to establish the theoretical cost of attending to the needs of the different types of dependent persons in the different types of care centres, and the methodology used could be extrapolated to other regions. The daily cost per user for elderly residential care is €53.72. The cost per user in elderly day centres (5 days) is 32.56 euros. In residential centres for people with disabilities, the values range between €47.41 and €75.25 depending on the category of the centre. In three categories of centres the public price is not enough to cover the cost (physical disability, intellectual disability, mental illness – low care), and therefore the administration should reconsider their public prices for these kind of centres if they want to really contribute to the sustainability of these residential care centres. This research will have important implications for policy-makers in a context of fulfilment of SDGs and where better support for old and disabled people and their carers, as well as fair and efficient financing of social care services, are essential to address the current and future challenges of dependency.

In this work, we report the magnetocaloric effect (MCE) in two systems of non-interactive particles, the first corresponds to the Landau problem case and the second, the case of an electron in a quantum dot subjected to a parabolic confinement potential. In the first scenario, we realize that the effect is totally different from what happens when the degeneration of a single electron confined in a magnetic field is not taken into account. In particular, when the degeneracy of the system is negligible, the magnetocaloric effect cools the system, while in the other case, when the degeneracy is strong, the system heats up. For the second case, we study the competition between the characteristic frequency of the potential trap and the cyclotron frequency to find the optimal region that maximizes the ΔT of the magnetocaloric effect, and due to the strong degeneration of this problem, the results are in coherence with those obtained for the Landau problem. Finally, we consider the case of a transition from a normal MCE to an inverse one and back to normal as a function of temperature. This is due to the competition between the diamagnetic and paramagnetic response when the electron spin in the formulation is included.

In the realm of educational technology, Data Analytics (DA) is reshaping teaching and learning. This paper investigates the impact of DA on education, specifically comparing Student Information Systems (SIS) and Learning Management Systems (LMS). Data-driven insights from SIS and LMS platforms enable educators to tailor instructional strategies to individual student needs effectively. While SIS manages student data for administrative tasks, LMS offers tools for content delivery and collaboration. Using the strengths of SIS and LMS, educators can optimise teaching and learning experiences, tracking student progress, and fostering collaboration. The comparison emphasises their distinct roles: SIS manages administrative tasks, while LMS focusses on content delivery and collaboration. Using both systems, educators improve the teaching and learning experience, leveraging DA for continuous improvement. In summary, this paper underscores the transformative role of DA in education, framed within the context of comparing the SIS and LMS functionalities. By examining the intersection of data-driven decision making and educational technology, educators are equipped with the tools and knowledge to harness the power of data for meaningful and impactful teaching and learning.

Convolutional Neural Networks (CNNs) present drawbacks for modeling geometric transformations, such as scaling and rotation, caused by the convolution operation’s locality. Deformable convolution (DCON), a mechanism that substitutes standard convolution, increasing the receptive field to capture relevant features, is a promising approach to solve this drawback and improve the robustness of CNNs. However, the optimal way to replace the standard convolution with its deformable counterpart in a CNN model is unclear. In this study, we clarify this aseveration by conducting several experiments using deformable convolutions applied in the layers that conform a small four-layer CNN model. We also use deformable convolutions on the four-layers of several ResNet CNNs with depths 18, 34, 50, and 101. The models were tested in binary balanced classes with 2D data for image classification: Cats &amp; Dogs, EyesPACS, Spyders &amp; Chickens, and Shapes. After this testing, we evaluated DCON in 3D data for action recognition: UCF101 and Human2 (a dataset we compiled to control movement, clothing and background). The contribution of this research lies in a guideline to use DCON. It can be summarized as follows: if DCON is used on the first layers of the proposal of model (with simple features), the computational resources expressed as the quantity of Flops will tend to increase and produce bigger misclassification than the standard CNN. However, if the DCON is used at the end layers, the quantity of Flops used in the training and testing will decrease, and the classification accuracy will improve by up to 20% about the base model. Moreover, it gains robustness when using deformable convolutions because it can adapt to the region of interest. Also, the best kernel size of the DCON is three. It showed better results than size five. In the last case, the quantity of Flops increase quadratically, but their performance does not increase significantly. With these results, we propose a guideline to use the DCON and contribute to understanding the impact of DCON on the robustness of CNNs.

This article proposes a monitoring system that allows to track transitions between different stages in the berry harvesting process (berry picking, waiting for transport, transport, and arrival to the packing) solely using information from temperature and vibration sensors located in the basket. The monitoring system assumes a characterization of the process based on Hidden Markov Models and uses the Viterbi algorithm to perform inference and estimate the most likely state trajectory. The obtained state trajectory estimate is then used to compute a potential damage indicator in real-time. The proposed methodology does not require information about the weight of the basket to identify each of the different stages, which makes it effective and more efficient than other alternatives available in the industry.

In this work, a colorimetric indicator based on gold nanoparticles (AuNP) and a biodegradable and eco-friendly polymer (sodium alginate, Alg.), has been developed, for the real-time detection of fish spoilage products. AuNP and colorimetric indicator were characterized by: UV-Vis, FTIR spectroscopies, TGA, DSC, XRD, TEM, and colorimetry. The UV-Vis spectrum and TEM showed the successful synthesis, the spherical shape, and the size of AuNPs. Results indicated color changes of the indicator in packaged fish on day 9 of storage at refrigerated temperature (5ºC). These results showed the successful application of colorimetric indicator in the detection of TVB-N in packaged fish.

Paving blocks are concrete pieces placed in exposed places to the weather, which are sub-jected to loads and wear. Hence, quality control in the manufacture of paving blocks is es-sential to guarantee the properties and durability of the product in construction projects. In Ecuador, the requirements are described in the Ecuadorian technical standard "NTE INEN 3040", and tensile splitting strength is a fundamental requirement to guarantee product quality. It is analyzed using quality control measurements such as dimensions, the weight of the fresh paving block in the vibro-compacted process, and the percentage of water absorption in order to know how the variables influence and manage to predict the tensile splitting strength to avoid product non-conformity in advance, having a timely and better control of the manufacturing process. The data was obtained from a company that can produce 30 000 units per day of rectangular paving blocks with 6 cm thickness. Mul-tivariate models such as multiple linear regression, regression trees, random forests and neural networks are performed to predict the tensile splitting strength variable through two groups of predictors; the first group is the thickness mm, width mm, length mm, mass of fresh paving block g and percentage of water absorption %. The second group of pre-dictor variables is the density of the fresh paving block kg/m3 and the percentage of water absorption %. It is concluded that the multiple linear regression method performs better in predicting the first group of predictor variables with a mean square error (MSE) of 0.110086, followed by the neural network without hidden layers resulting in an MSE of 0.112198. The best method for the second set of predictors was the neural network with-out hidden layers with a mean square error ( MSE ) of 0.112402, closely followed by the multiple linear regression model with an MSE of 0.115044.

Climate change is currently one of the main problems facing agriculture to achieve sustainability. It causes situations such as drought, increased rainfall, and increased diseases, causing a decrease in food production. In order to combat these problems, Agricultural Big Data contributes with tools that allow improving the understanding of complex, multivariate, and unpredictable agricultural ecosystems through the collection, storage, processing, and analysis of vast amounts of data from diverse heterogeneous sources. This research aims to discuss the advancement of technologies used in Agricultural Big Data architectures in the context of climate change. The study aims to highlight the tools used to process, analyze, and visualize the data and discuss the use of the architectures in the crop, water, climate, and soil management, especially to analyze the context, whether it is in Resilience Mitigation or Adaptation. The PRISMA protocol guided the study, finding 33 relevant papers. Despite the advances in this line of research, few papers were found that mention the components of the architectures, in addition to the lack of standards and the use of reference architectures, which allow the proper development of Agricultural Big Data in the context of climate change.

The purpose of this paper is to explore the extent to which traditional economic policies can be oriented by sound practices. It is becoming widely accepted that sustainable economic growth (and not only economic growth) is the final target of economic policies; but most economic policies are applied just looking to the short-run without taking in account the long-run perspective. Our aim will be to show how a sustainable economic policy-making would be possible, making compatible the stabilization of the economy in the short-run with a sustainable economic growth in the long-run. We confront the design of economic policies with the 17 goals of the 2030 Agenda. We argue that all sustainable development goals can be attained by the design and implementation of sustainable economic policies. Finally, to illustrate this point we will conduct a simulation exercise to show under which combinations of demand policies technological shocks would promote a path of sustainable growth. Our results will provide a reference framework for a sustainable economic policy-making.

In this paper, we revisit the q-states clock model for small systems. We present results for the thermodynamics of the q-states clock model from $q=2$ to $q=20$ for small square lattices $L \times L$, with L ranging from $L=3$ to $L=64$ with free-boundary conditions. Energy, specific heat, entropy and magnetization are measured. We found that the Berezinskii-Kosterlitz-Thouless (BKT)-like transition appears for $q>5$ regardless of lattice size, while the transition at $q=5$ is lost for $L<10$; for $q\leq 4$ the BKT transition is never present. We report the phase diagram in terms of $q$ showing the transition from the ferromagnetic (FM) to the paramagnetic (PM) phases at a critical temperature T$_1$ for small systems which turns into a transition from the FM to the BKT phase for larger systems, while a second phase transition between the BKT and the PM phases occurs at T$_2$. We also show that the magnetic phases are well characterized by the two dimensional (2D) distribution of the magnetization values. We make use of this opportunity to do an information theory analysis of the time series obtained from the Monte Carlo simulations. In particular, we calculate the phenomenological mutability and diversity functions. Diversity characterizes the phase transitions, but the phases are less detectable as $q$ increases. Free boundary conditions are used to better mimic the reality of small systems (far from any thermodynamic limit). The role of size is discussed.

This study contributes to the debate on accessibility of higher education in Chile, focusing on both socioeconomic and geospatial dimensions of access to university study. The central question we address in this paper is the following: Does geography (physical distance and neighborhood effects) play a significant role in determining accessibility of higher education in Chile? We use Heckman probit-type (Heckit) models to adjust for selection in the process of completing the trajectory towards higher education – that is, pre-selection, application to study at university, and ultimately admission (or denial) to a higher education institution. The results shows that the geospatial elements have a significant local effect on the student’s application and access to Chilean universities.

Graphene is perhaps the most prominent “Dirac material,” a class of systems whose electronic structure gives rise to charge carriers that behave as relativistic fermions. In multilayer graphene several crystal sheets are stacked such that the honeycomb lattice of each layer is displaced along one of the lattice edges. When subject to an external magnetic field, the scaling of the multilayer energy spectrum with the magnetic field, and thus the system’s thermodynamic behavior, depends strongly on the number of layers. With this in mind, we examine the performance of a finite-time endoreversible Otto cycle with multilayer graphene as its working medium. We show that there exists a simple relationship between the engine efficiency and the number of layers, and that the efficiency at maximum power can exceed that of a classical endoreversible Otto cycle.

Learning systems have been very focused on creating models that are capable of obtaining the best results in error metrics. Recently, the focus has shifted to improvement in order to interpret and explain their results. The need for interpretation is greater when these models are used to support decision making. In some areas this becomes an indispensable requirement, such as in medicine. This paper focuses on the prediction of cardiovascular disease by analyzing the well-known Statlog (Heart) Data Set from the UCI’s Automated Learning Repository. This study will analyze the cost of making predictions easier to interpret by reducing the number of features that explain the classification of health status versus the cost in accuracy. It will be analyzed on a large set of classification techniques and performance metrics. Demonstrating that it is possible to make explainable and reliable models that have a good commitment to predictive performance.

Sufficient evidence is currently available to demonstrate the reality of the warming of our planet's climate system. Global warming has different effects on climate at the regional and local levels. The detection of changes in extreme events using instrumental data provides further evidence of such warming and allows for the characterization of its local manifestations. The present study analyzes changes in temperature and precipitation extremes in the Mexican state of Zacatecas using climate change indices developed by the Expert Team on Climate Change Detection, Monitoring and Indices (ETCCDI). We studied a 40-year period (1976-2015) using annual and seasonal time scales. Maximum and minimum temperature data were used, as well as precipitation statistics from the Mexican climatology database (CLICOM) provided by the Mexican meteorological service. Weather stations with at least 80% of data availability for the selected study period were selected; these databases were subjected to quality control, homogenization, and data filling using Climatol, which runs in the R programming language. These homogenized series were used to obtain daily grides of the three variables at a resolution of 1.3 km. Results reveal important changes in temperature-related indices, such as the increase in maximum temperature and the decrease in minimum temperature. Irregular variability was observed in the case of precipitation, which could be associated with low-frequency oscillations such as the Pacific Decadal Oscillation and the El Niño–Southern Oscillation. The possible impact of these changes in temperature and the increased irregularity of precipitation could have a negative impact on the agricultural sector, especially given that the state of Zacatecas is the largest national bean producer. The most important problems in the short term will be related to the difficulty of adapting to these rapid changes and the new climate scenario, which will pose new challenges in the future.

Wireless sensor networks can provide a cheap and flexible infrastructure to support the measurement of noise pollution. However, the processing of the gathered data is challenging to implement on resource-constrained nodes, because each node has its own limited power supply, low-performance and low-power micro-controller unit and other limited processing resources, as well as limited amount of memory. We propose a sensor node for monitoring of indoor ambient noise. The sensor node is based on a hardware platform with limited computational resources and utilizes a number of simplifications to approximate more complex and costly signal processing stage. Furthermore, to reduce the communication between the sensor node and a sink node, as well as the power consumed by the IEEE 802.15.4 (ZigBee) transceiver, we perform digital A-weighting filtering and non-calibrated calculation of the sound pressure level on the node. According to experimental results, the proposed sound level meter can accurately measure the noise levels of up to 100~dB, with the mean difference of less than 2~dB compared to Class 1 sound level meter. The proposed device can continuously monitor indoor noise for several days. Despite the limitations of the used hardware platform, the presented node is a promising low-cost and low-power solution for indoor ambient noise monitoring.

The objective of this study is to evaluate the effects of the 3D point cloud density derived from unmanned aerial vehicle (UAV) photogrammetry and structure from motion (SfM) and multi-view stereopsis (MVS) techniques, the interpolation method for generating a digital terrain model (DTM), and the resolution (grid size) of the derived DTM on the accuracy of estimated heights in small areas, where a very accurate high spatial resolution is required. A UAV-photogrammetry project was carried out on a bare soil of 13 × 13 m with a rotatory wing UAV at 10 m flight altitude (equivalent ground sample distance = 0.4 cm). The 3D point cloud was derived, and five sample replications representing 1, 2, 3, 4, 5, 10, 15, 20, 30, 40, 50, 60, 70, 80 and 90% of the original cloud were extracted to analyze the effect of cloud density on DTM accuracy. For each of these samples, DTMs were derived using four different interpolation methods (Inverse Distance Weighted (IDW), Multiquadric Radial Basis Function (MRBF), Kriging (KR), and Triangulation with Linear Interpolation (TLI)) and 15 DTM grid size (GS) values (20, 15, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0.67, 0.5, and 0.4 cm). Then, 675 DTMs were analyzed. The results showed, for each interpolation method and each density, an optimal GS value (most of the cases equal to 1 cm) for which the Root Mean Square Error (RMSE) is minimum. IDW was the interpolator which yielded best accuracies for all combination of densities and GS. Its RMSE, considering the raw cloud, was 1.054 cm. The RMSE increased 3% when a point cloud with 80% extracted from the raw cloud was used to generate the DTM. When the point cloud included the 40% of the raw cloud, RMSE increased 5%. For densities lower than 15%, RMSE increased exponentially (45% for 1% of raw cloud). The grid size minimizing RMSE for densities of 20% or higher was 1 cm, which represents 2.5 times the ground sample distance of the pictures used for developing the photogrammetry project.

In this work, we report the caloric effect for an electronic system of the antidot type, modeled by combining a repulsive and attractive potential (parabolic confinement). In this system, we consider the action of a perpendicular external magnetic field and the possibility of having an Aharonov-Bohm flux (AB-flux) generated by a current passing through a solenoid placed inside the forbidden zone for the electron. The energy levels are obtained analytically, and the model is known as the Bogachek and Landman model. We propose to control the caloric response of the system by varying only the AB-flux, finding that in the absence of an external magnetic field, the maximization of the effect always occurs at the same AB-flux intensity independent of the temperature while fixing the external magnetic field at a non-zero value breaks this symmetry and changes the point where the caloric phenomenon is maximized and is different depending on the temperature to which the process is carried. Due to the great diversity in technological applications that have antidots in electronics, the possibility of controlling their thermal response just by varying the intensity of the internal current inside the solenoid can be a platform of interest for experimental studies.

This present work explores the performance of a thermal-magnetic engine of Otto type, considering as a working substance an effective interacting spin model corresponding to the q− state clock model. We obtain all the thermodynamic quantities for the q = 2, 4, 6, 8 cases in a small lattice size (3×3 with free boundary conditions) by using the exact partition function calculated from the energies of all the accessible microstates of the system. The extension to bigger lattices was performed using the mean-field approximation. Our results indicate that the total work extraction of the cycle is highest for the q=4 case, while the performance for the Ising model (q=2) is the lowest of all cases studied. These results are strongly linked with the phase diagram of the working substance and the location of the cycle in the different magnetic phases present, where we find that the transition from a ferromagnetic to a paramagnetic phase extracts more work than one of the Berezinskii–Kosterlitz–Thouless to paramagnetic type. Additionally, as the size of the lattice increases, the extraction work is lower than smaller lattices for all values of q presented in this study.

The implementation of residential distributed generation (DG) in South America has shown significant growth in the last decade, driven by increased research on photovoltaics and renewable energy sources. Regulatory policies and business models have been crucial in fostering the adoption of DG in the region, with residential self-supply being the most receptive sector for implementing the concept. This article presents a literature review on DG as applied to residential self-supply in South America by comprehensively analyzing documents published between 2013 and 2023, applying the PRISMA methodology. In total, 37 literature resources have been systematically selected and reviewed to contribute to the identification of trends and developments in the field of DG in the residential sector, as well as highlighting areas that require further research and attention from stakeholders, including policymakers, investors, technology providers and consumers in the South American context.

Autoimmune thyroid disease refers to a spectrum of various diseases, with two extremes of clinical presentation, hypo-thyroidism (Hashimoto's thyroiditis), and hyperthyroidism (Graves-Basedow disease). Both conditions are character-ized by presenting a cellular and humoral autoimmune reaction, with an increase in the synthesis and secretion of an-tibodies directed towards various thyroid antigens, together with a phenomenon of thyrocyte necrosis and apoptosis (in Hashimoto's thyroiditis) and a persistent thyrotropin-receptor stimulation (in Graves-Basedow disease). The diagnosis of both entities is based on the clinical, laboratory and imaging findings. In this review, the usefulness of thyroid antibodies in the diagnostic approach to autoimmune thyroid disease is de-scribed.

The Southern king crab, Lithodes santolla, is an important fishery resource in the inner seas of Chilean Patagonia. The fishing gear used to catch Southern king crab (bait trap) and its operation at different depths over several months provide the opportunity to gather information about relative abundance. The aim of the present study was to analyze the information collected from the catches of Southern king crab and its associated fauna in the Magdalena Fjord to study the biodiversity and ecology of scavenging decapod crustaceans. Specifically, the study aimed to determine the bathymetric patterns of abundance by species, to model the abundance by season (winter and spring) and to determine the structuring pattern of scavenging decapods assemblage. Samples were collected between June and November 2019 by deploying traps in four bathymetric strata: 1 = 0–50 m; 2 = 51–100 m; 3 =101–150 m; 4 = 151–200 m. We registered a total of 673 decapod specimens associated with the Southern king crab fishery, representing five species: Lithodes santolla (n = 96), Libidoclaea smithii (n = 10), Metacarcinus edwardsii (n = 58), Munida gregaria (n = 507) and Peltarion spinulosum (n = 2). The abundance of decapod species varied by month and bathymetric strata. We found bathymetric patterns for L. santolla abundance, M. gregaria, M. edwardsii, and total species abundance. The most informative model to explain scavenging decapod abundance by GLM included species and season. The null model of species co-occurrence analysis revealed that all species associations during the sampled months were random. Our study is the first that provides evidence about patterns of bathymetrical and temporal variation of scavenging decapod abundance and expands the body of knowledge regarding the biodiversity of scavenger decapods in the Magdalena Sound, which currently is affected by multiple stressors such as climate change and anthropic activities (aquaculture and fisheries).

The study analyzed Ecuador's presence in the Web of Science (WoS) post-pandemic from a multivariate dynamic, highlighting a significant transformation in scientific communication towards open access (OA). The methodology integrated multivariate statistical techniques, using R and specialized tools, to process 9,085 relevant articles, 52% of the Ecuadorian publications in WoS between 2019 and 2021 were open access. This movement reflects a commitment to quality research and accessibility, showing an increase in publications and citations under OA. The research underscores the importance of establishing robust national OA policies in Ecuador to promote scientific collaboration and an equitable distribution of knowledge. Despite funding challenges and the lack of specific regulations, educational institutions in Ecuador have maintained a constant scientific output, adapting to the global environment and the demand for transparent information. The study concludes that there is an urgent need for a holistic approach to OA in the country, recognizing the progress made despite the difficulties.

This paper aims to establish a current relationship between pharmaceutical sciences and the development of perfumes and fragrances, which bring significant economic benefits and whose added value is among other professionals, the one made by professionals in Pharmacy. For this purpose, historical data are used as a starting point and galenic, chemical and botanical aspects are discussed in a transversal way. In this sense, it must be taken into account that in the case of Spanish pharmacy, it is closely linked to the knowledge and use of plants. Sources such as Web of Science (WOS) and databases such as Scopus, monographs and various web pages (where scientific-technical documents appear) have been used. The results and discussion are based on the selection of the 50 plant species most commonly used in high quality fragrances. Therefore, this publication should be considered as an approach to this subject based on an analysis of a representative sample of data. Some characteristics of perfumes (classification according to the concentration of essential oils and combination of plant extracts) are presented beforehand. They also briefly compile the traditional and modern ways in the treatment of these extracts. The main focus of this work is the botanical and chemical analysis of these described plants, pointing out their common name, correct botanical name, geographical place of origin, used part of the plant and main molecules. The 50 botanical species belong to 27 families of angiosperms and are represented in a large part of the phylogenetic tree of botanical systematics. The most significant families are aromatic: Rutaceae (16.7%), Lamiaceae (16.7%) and Apiaceae (6.5%). The most represented genus is Citrus (with seven species or hybrids). However, it should be noted that natural extracts of good quality natural fragrances may be supplemented with chemically synthesized molecules. Of the 50 botanical species selected, 84% of the extracts have their origin in Tropical Asia, the Middle East and the Mediterranean region. This figure generally coincides with the percentage of medicinal plants (or their extracts) admitted by the European Pharmacopoeia. All parts of a plant (depending on which one it is) can be a source of molecules for the elaboration of these products. The most commonly used parts to obtain extracts are flowers (34%) and leaves (30%), a biological circumstance that is explained in this work. On the opposite side are the resins (10%), rhizomes and roots (8%). In this work, 110 molecules have been found that are part of the essences of perfumes and fragrances, the most frequent are: linalool, limonene, 1,8-cineole, eugenol and derivatives, geraniol, vanillin and derivatives, β-cariophyllene, p-cmene and farnesene and derivatives (3.64%). However, in order to elaborate a quality perfume, many other molecules must be taken into account, according to the creative experience of the perfumer, which is subject to confidentiality and chemical analysis according to current legislation, which would avoid fraud, allergy and dermatitis problems.

UAV photogrammetry development during the last decade has allowed to catch information at a very high spatial and temporal resolution from terrains with very difficult or impossible human access. This paper deals with the application of these techniques to study and produce information of very extreme topography which is useful to plan works on this terrain or monitoring it over the time to study its evolution. The methodology stars with the execution of UAV flights on the cut slope studied, one with the cam vertically oriented and other at 45º respect that orientation. Ground control points (GCPs) and check points (CPs) were measured for georeference and accuracy measurement purposes. Orthophoto was obtained projecting on a fitted plane to a studied surface. Moreover, since a digital surface model (DSM) is not able to represent faithfully that extreme morphology, information to project works or monitoring it has been derived from the point cloud generated during the photogrammetric process. An informatics program was developed to generate contour lines and cross sections derived from the point cloud, which was able to represent all terrain geometric characteristics, like several Z coordinates for a given planimetric (X, Y) point. Results yield a root mean square error (RMSE) in X, Y and Z directions of 0.053 m, 0.070 m and 0.061 m respectively. Furthermore, comparison between contour lines and cross sections generated from point cloud with the developed program on one hand and those generated from DSM on other hand, shown that the former are capable of representing terrain geometric characteristics that the latter cannot. The methodology proposed in this work has been shown as an adequate alternative to generate manageable information, as orthophoto, contour lines and cross sections, useful for the elaboration, for example, of projects for repairing or maintenance works of cut slopes with extreme topography.

Plastid genomes are in general highly conserved given their slow evolutionary rate, thus large changes in their structure are unusual. However, when specific rearrangements are present, they are often phylogenetically informative. Asteraceae is a highly diverse family whose evolution is long driven by polyploidy (up to 48x) and hybridisation, both processes usually complicating systematic inferences. In this study, we have generated one of the most comprehensive plastome-based phylogenies of family Asteraceae, providing information about the structure, genetic diversity, and repeat composition of these sequences. By comparing the whole plastome sequences obtained, we confirmed the double inversion located in the long single copy region, for most of the species analysed (with the exception of basal tribes), a well-known feature for Asteraceae plastomes. We also show that genome size, gene order and gene content are highly conserved along the family. However, species representative of the basal subfamily Barnadesioideae -as well as in the sister family Calyceraceae - are lacking the pseudogene rps19 located in one inverted repeat. The phylogenomic analysis conducted here, based on 63 protein-coding genes, 30 transfer RNA genes and 21 ribosomal RNA genes from 36 species of Asteraceae, are overall consistent with the general consensus for the family’s phylogeny, while resolving the position of tribe Senecioneae and revealing some incongruences at tribe level between reconstructions based on nuclear and plastid DNA data.

After 40 years of the discovery of metallocene catalysts, there are still several aspects that remain unresolved, especially when the “conventional” alkylaluminum activators are not used. Herein, we systematically investigate the synthesis of PE via three different zirconocene catalysts, with different alkyl substituents, activated via different organoboron compounds. The polymerization behavior, as well as the properties of the materials, are evaluated. The results demonstrate that the highest catalytic activity is shown by Bis(cyclopentadienyl)dimethylzirconium activated by trityl tetra(pentafluorophenyl)borate. Also finding that toluene is the optimum solvent for these systems and at these reaction conditions. Moreover, to validate our experimental results, a comprehensive mathematical model is developed on the basis of thermodynamic and kinetic principles. The concentration of ethylene transferred to the solvent phase (toluene) in a liquid-vapor equilibrium (LVE) system is estimated based on the Duhem’s theorem. Arrhenius expressions for the kinetic rate constants of a proposed kinetic mechanism are estimated by a kinetic model, in which the rate of polymerization is fitted by a least-square optimization procedure and the molecular weight averages by the method of moments. The simulations of the coordination polymerization suggest the presence of two types of active sites, principally at low temperatures, and the reactivation of the deactivated sites via a boron-based activator. However, the effect of the temperature on the reactivation step is no clear; a deeper understanding via designed experiments is required.

We studied the performance of a quantum magnetic Stirling cycle that uses a working substance composed of two entangled antiferromagnetic qubits (J) under the influence of an external magnetic field (Bz) and an uniaxial anisotropy field (K) along the total spin in the y-direction. The efficiency and work were calculated as a function of Bz and for different values of the anisotropy constant K given hot and cold reservoir temperatures. The anisotropy has been shown to extend the region of the external magnetic field in which the Stirling cycle is more efficient compared to the ideal case.

The process of establishing secure communication between devices in the Internet of Things (IoT) can be approached by using a One-time-Pad (OTP) protocol. We propose using a known secure multiparty sum protocol for generating a One-time-Pad key using true (physical) random numbers in each device (party). We implemented the proposal using ZeroC-Ice, a middleware for distributed computing. The protocol security properties were analyzed under the assumptions of the Dolev-Yao threat model.

Anthropogenic lead pollution is an environmental problem that threatens the quality of soils and waters and endangers living organisms in numerous surface and subsurface habitats. Lead coprecipitation on mineral surfaces through dissolution-recrystallization processes has long term effects on lead bioavailability. Gypsum and calcite are among the most abundant and reactive rock forming minerals present in numerous geological settings. In this work, we study the interaction of slightly acidic (pHi = 5.5) Pb-bearing aqueous solutions ([Pb]i = 1 mM and 10 mM) with crystals of gypsum and /or calcite under atmospheric conditions. This interaction results in a reduction of the concentration of lead in the liquid phase due to the precipitation of newly formed Pb-bearing solid phases. The extent of this Pb removal mainly depends on the nature of the primary mineral phase involved in the interaction. Thus, when gypsum is the only solid phase initially present in the system the Pb-bearing liquid-gypsum interaction results in Pb removals in the 98-99.8 % range, regardless of [Pb]i. In contrast, when the interaction takes place with calcite, Pb removal strongly depends on [Pb]i. It reaches 99% when [Pb]i = 1 mM while it is much more modest (⁓13%) when [Pb]i = 10 mM. Interestingly, Pb-removal is maximized for both [Pb]i (99.9 % for solutions with [Pb]i = 10 mM and 99.7% for solutions with [Pb]i = 1 mM) when Pb-polluted solutions simultaneously interact with gypsum and calcite crystals. Despite the large Pb removals found in most of the cases studied, the final Pb concentration ([Pb]f) in the liquid phase always is well above the maximum permitted in drinking water (0.1 ppm), with the minimum ([Pb]f = 0.7 ppm) being obtained for solutions with [Pb]i =1 mM after their interaction with mixtures of gypsum and calcite crystals. This result suggests that integrating the use of mixtures of gypsum-calcite crystals might help to develop more efficient strategies for in-situ decontaminating Pb-polluted waters through mineral coprecipitation processes.

The synthesis and structural characterization of a new triangular Cu3-3OH pyrazolato complex of formula, [Cu3(μ3-OH)(pz)3(Hpz)3][BF4]2 (1-Cu3), Hpz = pyrazole, is presented. The triangular unit forms a quasi-isosceles triangle with Cu-Cu distances of 3.3739(9), 3.3571(9), and 3.370(1) Å. This complex is isostructural to the hexanuclear complex [Cu3(μ3-OH)(pz)3(Hpz)3](ClO4)2]2 (QOPJIP). A comparative structural analysis with other reported triangular Cu3-3OH pyrazolato complexes has been done, showing that, depending on the pyrazolato derivative, auxiliary ligand or counter-anion can affect the nuclearity and/or the dimensionality of the system. The magnetic properties of 1-Cu3 are analyzed by experimental data and DFT calculation. A detailed analysis is done on the magnetic properties comparing experimental and theoretical data of other molecular triangular Cu3-3OH complexes, showing that the displacement of the μ3-OH- from the Cu3 plane, together with the type of organic ligands, influences the nature of the magnetic exchange interaction between the spin-carrier centers, since it affects the overlap of the magnetic orbitals involved in the exchange pathways. Finally, a detailed comparison of the magnetic properties of 1-Cu3 and QOPJIP was done, which allowed us to understand the differences in their magnetic properties.

We study the performance of an endoreversible magnetic Otto cycle with a working substance composed of a single quantum dot described using the well-known Fock-Darwin model. We find that tuning the intensity of the parabolic trap (geometrical confinement) impacts the proposed cycle’s performance, quantified by the power, work, efficiency, and parameter region where the cycle operates as an engine. We demonstrate that a parameter region exists where the efficiency at maximum output power exceeds the Curzon-Ahlborn efficiency, the efficiency at maximum power achieved by a classical working substance.

Spent batteries recycling is an important way to obtain low-cost graphite. Nevertheless, the obtaining of crystalline graphite with a rather low density of defects is required for many applications. In the present work, high-quality graphites have been obtained from different kinds of spent batteries. Black masses from spent alkaline batteries (batteries black masses, BBM), and lithium-ion batteries from smartphones (smartphone black masses, SBM) and electric and/or hybrid vehicles (lithium-ion black masses, LBM) were used as starting materials. A hydrometallurgical process was then used to obtain recycled graphites by acidic leaching. Different leaching conditions were used depending on the type of the initial black mass. The final solids were characterized by a wide set of complementary techniques.

The aim of Predictive Maintenance, within the field of Prognostics and Health Management (PHM), is to identify and anticipate potential issues in the equipment before these become critical. The main challenge to be addressed is to assess the amount of time a piece of equipment will function effectively before it fails, which is known as Remaining Useful Life (RUL). Deep Learning (DL) models, such as Deep Convolutional Neural Networks (DCNN) and Long Short-Term Memory (LSTM) networks, have been widely adopted to address the task, with great success. However, it is well known that this kind of black box models are opaque decision systems, and it may be hard to explain its outputs to stakeholders (experts in the industrial equipment). Due to the large number of parameters that determine the behavior of these complex models, understanding the reasoning behind the predictions is challenging. This work presents a critical and comparative revision on a number of XAI methods applied on time series regression model for PM. The aim is to explore XAI methods within time series regression, which have been less studied than those for time series classification. The model used during the experimentation is a DCNN trained to predict the RUL of an aircraft engine. The methods are reviewed and compared using a set of metrics that quantifies a number of desirable properties that any XAI method should fulfill. The results show that GRAD-CAM is the most robust method, and that the best layer is not the bottom one, as is commonly seen within the context of Image Processing.

Beyond the usual ferromagnetic and paramagnetic phases present in spin systems, the usual q-state clock model, presents an intermediate vortex state when the number of possible orientations q for the system is equal to 5 or larger. Such vortex states give rise to the Berezinskii-Kosterlitz-Thouless (BKT) phase present up to the XY model in the limit q→∞. Based on information theory, we present here an analysis of the classical order parameters plus new short-range parameters defined here. Thus, we show that even using the first nearest neighbors spin-spin correlations only, it is possible to distinguish the two transitions presented by this system for q greater than or equal to 5. Moreover, the appearance at relatively low temperature and disappearance of the BKT phase at a rather fix higher temperature is univocally determined by the short-range interactions recognized by the information content of classical and new parameters.

Wild germplasm can be classified as the raw material essential for crop improvement. Introgression of wild germplasm is normally used in breeding to increase crop quality or resilience to evolving biotic and abiotic threats. Here, we explore the potential of introgressing Vaccinium elliottii into commercial blueberry germplasm. Vaccinium elliottii is a wild diploid blueberry species endemic to the southeastern United States that possesses highly desirable and economically important traits for blueberry breeding such as: short bloom to ripe period, adaptation to upland sandy soils, disease resistance, firmness, and pleasant flavor. To examine the potential of hybridization, we evaluated populations of interspecific hybrids across multiples stages of breeding (i.e., F1, F2, and backcrosses) in two crop seasons. We used our extensive pedigree data to generate breeding values for pre-breeding blueberry hybrid populations. Hybrid performance was evaluated considering fitness (i.e., plant vigor and plant height) in addition to evaluating six fruit-quality and marketable-related traits (i.e., size, firmness, acidity, soluble solids, weight, and yield). Overall, F2 and backcrosses rapidly achieved market thresholds, presenting values not significantly different from commercial blueberry germplasm. Our results confirmed the potential of exploiting the high genetic variability contained in V. elliotii for interspecific hybridization. Additionally, we developed germplasm resources that can be further evaluated and utilized in the breeding process, advancing selections for fruit quality and environmental adaptation.

Confinement can induce substantial changes in the physical properties of macromolecules in suspension. Soft confinement is a particular class of restriction where the boundaries that constraint the particles in a region of the space are not well-defined. This scenario leads to a broader structural and dynamical behavior than the observed in systems enclosed between rigid walls. In this contribution, we study the ordering and diffusive properties of a two-dimensional colloidal model system subjected to a one-dimensional parabolic trap. Increasing the trap strength makes it possible to go through weak to strong confinement, allowing a dimensional transition from two- to one-dimension. The non-monotonic response of the static and dynamical properties to the gradual dimensionality change affects the system phase behavior. We find that the particle dynamics is connected with the structural transitions induced by the parabolic trap. In particular, at low and intermediate confinement regimes, complex structural and dynamical scenarios arise, where the softness of the external potential induces melting and freezing, resulting in faster and slower particle diffusion, respectively. Besides, at strong confinements, colloids move basically along one direction, and the whole system behaves structurally and dynamically similar to a one-dimensional colloidal system.

In this work we aim to experimentally study the nucleation and growth of CaCO3 phases precipitated from supersaturated aqueous solutions in the presence of varying concentrations of sulphate oxyanion. The experiments were conducted under pH conditions close to neutral (7.6) and considering a wide range of initial (SO42-)/(CO32-) ratios (0 to ~ 68) in the aqueous solution. We paid special attention to the evolution of the precipitates during ageing within a time framework of 14 days. The mineralogy, morphology and composition of the precipitates were studied by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy and EDX microanalysis. The concentration of sulphate ions in the reacted aqueous solution was study by ICPs. The experimental results show that the mineral composition of the precipitate recovered in each run varied with the (SO42-)/(CO32-) ratio in the parental solution, which influences the mineral evolution of the precipitates during ageing. We observe that high concentrations of sulphate in the aqueous solution stabilize the vaterite precipitates and inhibit calcite formation. Furthermore, aragonite never precipitates directly form the solution and it is only formed via a dissolution-precipitation process in solutions with high (SO42-)/(CO32-) ratio after long reaction times. Finally, gypsum only precipitates after long ageing in those aqueous solutions with the highest concentration of sulphate. The reaction pathways during ageing, the morphology of the calcite crystals and the composition of vaterite and calcite are discussed considering both, kinetic and thermodynamic factors. These results show a considerably more complex behavior of the system than that observed in experiments conducted under higher pHs and supersaturation levels and lower (SO42-)/(CO32-) ratios in the aqueous phase.

This review describes the positive effects of growth hormone on the cardiovascular system. We analyze why the vascular endothelium is a real internal secretion gland, whose inflammation is the first step for developing atherosclerosis, as well as the mechanisms by which GH acts on the vascular endothelium improving its dysfunction. We also report how GH acts on coronary arterial disease and heart failure, and on peripheral arterial disease inducing the generation of new collateral vessels able to bypass a major artery occlusion. We include some preliminary data from a trial in which GH or placebo is given to elder people suffering from critical limb ischemia, showing the effects of the hormone on plasma markers of inflammation, and stating that the administration of GH in short periods of time is safe and effective even in diabetic patients. We also analyze how Klotho may have strong relationships with GH, inducing, after being released from the damaged vascular endothelium, the pituitary secretion of GH to repair the damaged tissue. Lastly, we show how GH induces wound healing by increasing the blood flow to the ischemic tissue. In summary, we postulate that short-time GH administration is useful for treating cardiovascular diseases.

The decapod fauna in intertidal rocky shore in continental Chile has high species diversity mainly in northern and central Chile due high productivity of these coast due influence of cold Humboldt stream. One of the abundant species in these ecosystems is decapod Cyclograpsus cinereus Dana, 1851. The aim of the present study was determine the spatial distribution pattern of C. cinereus along rocky shore in Antofagasta bay, north of Chile between spring and summer 2018-2020. Data was obtained counting individuals from random quadrants in intertidal zones, to the obtained data was applied the variance mean ratio for determine if the specimens have random, aggregate or uniform distribution, that are associated to Poisson, negative binomial or positive binomial distributions respectively. Data obtained revealed the existence of associated distribution with respective negative binomial distribution pattern in 16 observations, and uniform distribution for 3 observations. The sites corresponds to rocky shores in urban zones, and in a protected zone, and the density does not have significant differences for both kind of sites. The observed data about aggregated pattern agree with observations for decapods for rocky shore in central and southern Chile, specifically in interpretative probabilistic models.

The article reports on a patient who required a cranial protection system.Using additive manufacturing techniques and surgical planning with the help of bio-models, a patient-specific bone implant solution was proposed that allows aesthetic restoration of the affected area and provides an adequate level of protection. In addition, through a comparative analysis with finite elements, the mechanical response to external actions of the medical device, printed with two materials: polymethylmethacrylate (PMMA) and polyether-ether-ketone (PEEK), is simulated. The tested materials have recognized biocompatibility properties, but their costs on the market differ significantly. The results obtained demonstrate the similarities in the responses of both materials. It offers the possibility that low-income people can access these devices, guaranteeing adequate biomechanical safety, considering that PMMA is a much cheaper material than PEEK.

A via ferrata (from the German “klettersteig”, hereinafter VF) is a sports route located on forest and mountains vertical rock walls equipped with steps, chains, artificial dams, bridges and other fixed elements and which have a steel cable (safety cable) all the way along allowing users to secure their progress and avoid possible falls [1]. This article aims to analyse the state of the art of the VF sector in Spain, especially in terms of the regulations of obligatory compliance, in addition to defining the basic characteristics of the installations to ensure that these are safe for users, providing a previously non-existent summary of the most important recommendations regardless of the country where they are installed.

Southern highbush blueberry plantations have been expanded into worldwide non-traditional growing areas with elite cultivars and improved horticultural practices. This article presents a comprehensive review of current production systems – alternatives to traditional open field production – such as production in protected environments, high-density plantings, evergreen production, and container-based production. We discuss the advantages and disadvantages of each system and compare their differences to the open field production. In addition, potential solutions have been provided for some of the disadvantages. We also highlight some of the gaps existing between academic studies and production in industry, providing a guide for future academic research. All these alternative systems have shown the potential to produce high yields with high quality berries. Alternative systems, compared to the field production, require higher establishment investments and thus create an entry barrier for new producers. Nevertheless, with their advantages, alternative productions have potential to be profitable.

The 2030 Agenda sets out seventeen Sustainable Development Goals (SDGs). The educational goal is to promote the education of citizens on sustainable development, among other things. Educating today's digital citizens on sustainability means training them for justice and social activism, commitment and political engagement. However, research into the subject shows a lack of consistency in the education of university students. This paper presents a study of students of Education, on education on sustainability through the practice of active and critical digital citizenship. A quasi-experimental method was used to learn about the behaviours of digital citizens, and intervention was carried out by means of an SDG-focused workshop and observation of the final level of commitment. The results show a positive level of commitment and digital activism around content related to sustainable development, which can be addressed from the university syllabus in a cross-curricular way.

The FTF (Fusarium Transcription Factor) gene family is composed of two members (FTF1 and FTF2) with high sequence homology. Both genes encode Zn(II)2Cys6 binuclear zinc finger transcription factors involved in the modulation of virulence in the F. oxysporum species complex (FOSC). While FTF1 is a multicopy gene exclusive of highly virulent strains of FOSC and is located in the accessory genome, FTF2 is a single copy gene, located in the core genome, and well conserved in all filamentous ascomycete fungi, except yeast. The involvement of FTF1 in the colonization of the vascular system and regulation of the expression of SIX effectors has been stablished. To address the role of FTF2 we generated and characterized null FTF2 mutants in a F. oxysporum f. sp. phaseoli weakly virulent strain and analyzed them together with the equivalent mutants formerly obtained in a highly virulent strain. The results obtained highlight a role for FTF2 as a negative regulator of the production of macroconidia and demonstrate that it is required for full virulence and positive regulation of SIX effectors. In addition, gene expression analyses provide compelling evidence that FTF2 is involved in the regulation of hydrophobins likely required for plant colonization.

This study aimed to assess the enhancement of physical fitness and quality of life through an 8 weeks strength program training in male adolescents soccer players. A lower body muscle groups intervention was performed, with 17 players in the experimental group (EG) and 15 in the control group (CG). The EG carried out soccer training complemented by specific strength work. Pre and post- intervention assessments included body composition, jump height, speed with change of direction, maximum speed in 20 m, movement velocity in back-squat, perceived fatigue effort, academic performance and quality of life. A general linear repeated measures model analysis was used considering for each variable, the interaction between groups (CG, EG) and time (basal, final), to analyze the differences between and within groups. The results showed reduction of fat in the upper limbs and trunk EG, improvements in jump height, maximum speed of 20 m, changes of direction and quality of life increased (p<0.05) in the EG too. It was concluded that a strength program could improve some components of physical performance in male adolescents soccer players.

The linkage between the salt wedge, tidal patterns, and the Magdalena River discharge is established by assessing the ensuing parameters: stratification (ϵ), buoyancy frequency (β), potential energy anomaly (φ), Richardson number (RL), and bottom turbulent energy production (P). The salinity, temperature, density, and water velocity data utilized were derived from MOHID 3D, a previously tailored and validated model for the Magdalena River Estuary. To grasp the dynamics of the river, a flow regime analysis was conducted during both wet and dry climatic seasons of the Colombian Caribbean. The utilization of this model aimed to delineate the estuary's spatial reach, considering flow rates spanning from 2000 to 6500 m³/s across two tidal cycles. This approach facilitates the prediction of the position, stability, and stratification degree of the salt front. Among the conclusions drawn, it is highlighted that: 1. The river flow serves as the principal conditioning agent for the system, inducing a strong estuary response to weather stations; 2. The extent of wedge intrusion and the river discharge exhibit a non-linear, inversely correlation; 3. Tidal waves cause differences of up to 1000 m in the horizontal extent of the wedge; 4. Widespread channel erosion occurs during the rainy season when the salt intrusion does not exceed 2 km; 5. Flocculation processes intensify during the transition between dry and wet seasons; 6. The stability of the salt layering and the consolidation of the FSI-TMZ are contingent upon the geometric attributes of the channel.

This study analyzed the levels of mental workload and the presence of burnout on a sample of fashion retailing workers from Spain and its relationship with the actual Covid-19 pandemic by exploring Covid-19 pandemic predictors of burnout and mental workload. We established a prospective cross-sectional design. Participants (n = 360) answered an online survey including questions about sociodemographic data, perception of Covid-19, CarMen-Q questionnaire (workload), and MBI (burnout syndrome). We obtained data throughout October-November 2020. The results showed that participants exhibit deep concern about the Covid-19 pandemic and its influence at the work level. Although the mental workload was near the middle point of the scale, participants showed moderate to high burnout levels, revealing that the sample is at risk of experiencing higher burnout levels over time as the pandemic and associated economic crisis continue. The multidimensional regression analysis results indicated that environmental changes, work overload, somatic symptoms, insomnia, negative job expectations, and uncertainty constituted significant mental workload predictors. Insomnia, somatic symptoms, and negative job expectations constituted significant predictors for burnout. In conclusion, the uncertainty at work derived from the Covid-19 pandemic is harming the psychological wellbeing of fashion retailing workers in Spain.

Background: Understanding the trophic ecology of threatened freshwater fishes is relevant to managing their conservation. The genus Orestias is endemic to the Andes region and shows great biogeographical interest in the Neotropics due to its adaptation to the high-altitude systems of the Andes as well as because several species are considered threatened. (2) Methods: Here, we synthesize the documented trophic interaction of Orestias spp. in freshwater ecosystems of the Andes region available in the literature and use available data to explore the trophic interaction of Orestias species via null models. (3) Results: Our findings showed that Orestias spp. consume a wide range of prey (i.e., mainly aquatic insects, crustaceans, and mollusks) that varied according to their habitats and feeding morphology. The null model revealed that species associations in diet were random because of the presence of many repeated species. Our results would reveal that some Orestias spp. may show an opportunistic feeding strategy that concurs with previous reports. Additionally, we highlight major information gaps associated with the trophic ecology of Orestias spp. and propose some direction for future studies. (4): Our study provides valuable in-formation on Orestias spp. trophic ecology, which may be useful for developing conservation strategies for native fish in the Neotropical region.

This article is a scoping review analyzing advances in experimental studies on bacterial self-healing of concrete. From Scopus, ScienceDirect, Web of Science and Google Scholar search engine databases, 54 studies were selected for analysis, and an increasing trend of publications since 2015 was found, with India as the country with the largest research presence. Different ma-terials are used as replacement or admixture in concrete, such as fibers, particles and recycled material from construction waste. It was found that the most commonly used bacteria are Bacillus subtilis and Bacillus sphaericus, which can improve the strength of concrete by generating calcite and sealing cracks. In addition, it was found that the presence of materials such as fibers, ashes and construction recyclates can protect bacteria in an alkaline environment. The designs usually in-clude more than two experimental groups and a control. In summary, this study highlights the importance of bacterial self-healing in concrete and provides information on advances in this field of research.

In contemporary construction, the prevalence of vibration serviceability issues in lightweight and slender structures has become increasingly common, owing to advancements in building materials and construction methods. While these structures often meet the criteria for ultimate limit states, they can still elicit complaints due to excessive vibrations induced by human activity. To address this challenge, the Integral Resonant Control (IRC) technique has emerged as a favored approach for actively damping vibrations in various systems. This study introduces a fresh perspective on implementing a multi-input multi-output (MIMO) IRC scheme for active vibration control (AVC) specifically tailored for pedestrian structures utilizing inertial mass actuators. Building upon a common framework and design methodology outlined in previous research, this work presents a novel application of MIMO IRC for AVC. The designed controller is rigorously tested and implemented on a laboratory floor structure to validate its efficacy.

Flare stacks are a key element in the safety of petrochemical and refinery industries; the correct operating conditions thereof must be ensured through a schedule for the periodic reviewing of all parts thereof. Advances in Non-Destructive Testing (NDT) in recent years and the application thereof to this field allow reliable, objective information to be obtained. This article describes and groups together the main applicable NDT techniques, analysing their advantages and disadvantages, updated with the new possibilities offered by unmanned aircraft or drones.

Modern imaging strategies are paramount to studying living systems such as cells, bacteria, and fungi and their response to pathogens, toxicants, and nanomaterials as modulated by exposure and environmental factors. The need to understand the processes and mechanisms of damage, healing and cell survivability of living systems continues to motivate the development of alternative imaging strategies. Of particular interest is the use of label-free techniques that minimize interference of biological processes by foreign marking substances and reduce intense light exposure and potential photo-toxicity effects. This review focus on the potential synergic capabilities of atomic force microscopy (AFM) as a well-developed and robust imaging strategy with demonstrated applications to unravel intimate details in biomedical applications, with the label-free, fast, and enduring Holotomographic Microscopy (HT) strategy. We first review the operating principles that form the basis for the complementary details provided by these techniques regarding the surface and internal information provided by HT and AFM is essential and complimentary for the development of several biomedical areas studying the interaction mechanisms of nanomaterials with living organisms. First, AFM can provide superb resolution on surface morphology and biomechanical characterization. Second, the quantitative phase capabilities of HT enable superb modeling and quantification of the volume, surface area, protein content, and mass density of the main components of cells and microorganisms, including morphology of cells in microbiological systems. These capabilities result from directly quantifying refractive index changes without requiring fluorescent markers or chemicals. As such, HT is ideally suited for long-term monitoring of living organisms in conditions close to their natural settings. We present a case-based review of the principal uses of both techniques and their essential contributions to nanomedicine and nanotoxicology, emphasizing cancer and infectious disease control. The synergic impact of the sequential use of these complementary strategies provides a clear drive for adopting these techniques as interdependent fundamental tools.

Background: The duration of the vaccine's protective efficacy against SARS-CoV-2 is unknown. Evaluation of the clinical performance of available tests is required. Objectives: To evaluate the clinical performance of three immunoassays for the detection of IgG antibodies generated by mRNA vaccines against SARS-CoV-2. Methods: Two automated immunoassays (Euroimmun Anti-SARS-CoV-2 ELISA IgG and Abbott SARS-CoV-2 CLIA IgG) and one lateral flow immunoassay (LFIA Test Livzon IgG) were tested. 300 samples distributed in 3 groups were analyzed: 100 subjects over 18 years old and under 45 years old, 100 subjects between 45-65 years old and another 100 over 65 years old. collected before vaccination, at 21 days, 1, 2, 3 and 6 months post-vaccination. Sensitivity, specificity, positive predictive value, negative predictive value, positive likelihood ratio, negative likelihood ratio, and agreement (I. Kappa) were calculated for each serological test. Results: Maximum sensitivity for IgG was 98.7%, 98.1%, and 97.8% for the ELISA Euroimmun, CLIA Abbott, and Livzon LFIA assays and maximum specificity for IgG was 99.4%, 99.9%. % and 98.4% ELISA, CLIA and LFIA respectively at 3 months after vaccination with a decrease in antibody levels from the sixth month. The best agreement was observed between ELISA and CLIA 100%; (k = 1.00). The agreement between ELIA, CLIA and LIFIA was 99% (k = 0964) at the second and third month after vaccination. Seroconversion was faster and longer lasting in the younger age groups. Conclusion: Our study showed an equivalent and homogeneous clinical performance for IgG of three immunoassays after vaccination and that the LIFIA assay is the most cost-effective, reliable and accurate for routine use in population studies of seroconversion and seroprevalence.

The cancer stem cell hypothesis suggests that neoplastic cells with stem characteristics hierarchically regulate tumor generation and its high cellular heterogeneity. These cells have been detected in all cancer types, and specific signaling pathways give the regulation of self-renewal and differentiation. In prostate cancer, androgen receptor signaling has been extensively studied, and in non-stem cells, it promotes cell proliferation and tumor progression, but in the cancer stem cell population, it negatively regulates processes such as self-renewal. However, in other types of cancer, such as breast and glioblastoma, the androgen receptor seems to favor the maintenance of cancer stem cells, suggesting that androgen signaling has different effects depending on the tumor context. This review discusses the role of androgen receptor in maintaining cancer stem cells by regulating proliferation, self-renewal, and differentiation, as well as the possible signaling pathways involved in these processes.

The use of vitamin D (VitD) supplements has become widespread in the last decade due not only to the dissociation between the blood levels recommended as "optimal" and those shown by the healthy population, but also to its presumed beneficial effects on multiple disorders. This work evaluated the levels of 25-hydroxyvitamin D [25(OH)D] in a healthy population of European origin living in a region with high solar irradiation. In serum samples from a population-based study conducted in the Canary Islands, levels of 25(OH)D were analyzed. In 876 individuals who had no history of kidney or malabsorption disorders and who had not been treated with calcium and/or VitD supplementation, the median 25(OH)D level was 26.3 (5th;95th percentile, 14.3;45.8)ng/mL. Notably, 65.4% of the population had 25(OH)D blood levels below 30ng/mL, 23.4% below 20ng/mL and 6.4% below 15ng/mL. Based on the lack of evidence supporting causality between 25(OH)D levels below what is recommended as optimal (≥20ng/mL, or even ≥30ng/mL) and major skeletal and non-skeletal diseases, and in light of the distribution of the concentration of this vitamin in healthy adults living under optimal conditions of solar irradiation, it seems reasonable to consider 25(OH)D levels below 20ng/mL and close to 15ng/mL as adequate for the general population.

Since the 1960s Rare earths (REs) applications gradually have expanded to everyday life. REs have great strategic importance in industrial and technological development, so it is expected an increase in their demand. Among the REs the European Commission considered Cerium and Lanthanum as critical raw materials. This research article studies the adsorption of Ce and La onto two carbon nanomaterials, multiwalled carbon nanotubes (MWCNT) and carboxylic functionalized multiwalled carbon nanotubes (MWCNT_ox). The latter has slightly more affinity for REs than MWCNT. The recovery percentage for Ce were 89 and 98% and in the case of for La were 99 and 92% using 0.8 g of MWCNT and 0.2 g of MWCNT_ox respectively. The adsorption process fits a pseudo second-order kinetic model and the Langmuir isotherm best represented the metal uptake.

The cerebellum is an encephalic region classically known for its central role in the control of movement, although recent research has revealed its involvement in other cognitive and affective tasks. Several different pathologies are known to affect this structure, causing a wide range of behavioral and gait impairments. Intriguingly, although the neurodegenerative factors affect all Purkinje cells of the cerebellum uniformly, certain neurodegeneration patterns can be distinguished, in which some Purkinje cells persist longer than other cell types. Precisely, there is a cerebellar region, lobe X, which is more resistant to different types of neurodegeneration regardless of the injury. This work will review the main models of cerebellar degeneration, with special emphasis on this region, and aims to reveal a common origin for its resistance to neuronal death.

Dendroclimatology has gained relevance during the XXI century. We analyze the state of-the-art of dendroclimatology in Latin America during the past 28 years (1990 to 2019), identifying the current state and recent advances in the application of dendroclimatology in this region. We carried out a systematic review in ScienceDirect, Web of Science, and Scopus databases using Boolean operators to logically connect the keywords “dendrochronology,” “dendroclimatology,” “trend,” “climatic variability,” and “climatic variability trend”, for each country. Dendroclimatological research conducted in the region focused on climatic reconstruction and the evaluation of new tree species with dendrochronological potential, which increase in 2010, then there was a gap between 1995 and 1996, later increase to present. Dendroclimatological studies in Latin America have been mainly developed in temperate climate zones (82.4 %) followed by tropical or subtropical areas (17.6 %). Dendroclimatological research in Latin America has provided advances in the study of climate variability by defining response functions of tree rings to climate. The generated information allows for a better understanding of the spatial and temporal dynamics of climatic variability and about its effects on ecosystems and society. We also call for increased dendroclimatological research based on subtropical and tropical forests limited studied until today.

We study the performance of a classical and quantum magnetic Otto cycle with a quantum dot as a working substance using the Fock-Darwin model with the inclusion of the Zeeman interaction. Modulating an external/perpendicular magnetic field, we found in the classical approach an oscillating behavior in the total work that is not perceptible under the quantum formulation. Also, we compare the work and efficiency of this system for different regions of the Entropy, $S(T,B)$, diagram where we found that the quantum version of this engine always shows a reduced performance in comparison to his classical counterpart.

Coronavirus Disease 2019 (Covid-19) was first described in December 2019 in Wuhan, Hubei Province, China; and produced by a novel coronavirus designed as the acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Covid-19 has become a pandemic reaching over 1.3 million confirmed cases and 73,000 deaths. Several efforts have been done to identify pharmacological agents that can be used to treat patients and protect healthcare professionals. The sequencing of the virus genome not only has offered the possibility to develop a vaccine, but also to identified and characterize the virus proteins. Among these proteins, main protease (M^pro) has been identified as a potential therapeutic target, since it is essential for the processing other viral proteins. Crystal structures of SARS-CoV-2 M^pro and inhibitors has been described during the last months. To describe additional compounds that can inhibit SARS-CoV-2 M^pro, in this study we performed a molecular docking-based virtual screening against a library of experimental and approved drugs. Top 10 hits included Pictilisib, Nimorazole, Ergoloid mesylates, Lumacaftor, Cefuroxime, Cepharanhine, and Nilotinib. These compounds were predicted to have higher binding affinity for SARS-CoV-2 M^pro than previously reported inhibitors for this protein, suggesting a higher potential to inhibit virus replication. Since the identified drugs have both pre-clinical and clinical information, we consider that these results may contribute to the identification of treatment alternative for Covid-19. Nevertheless, in vitro and in vivo confirmation should be performed before these compounds could be translated to the clinic.

Urban wind energy has emerged as an attractive source of distributed generation in cities to achieve sustainable development goals. The advance in technologies for the use of urban wind energy has turned this source into an attractive alternative for the decarbonization of cities and the energy transition. The objectives of this work are (1) to identify the potential of wind energy through numerical weather prediction (NWP) data tools and (2) to identify the roles and responsibilities of the stakeholders involved in the decision-making process. A methodology was developed in two phases and applied to a case study in the Dominican Republic. The first phase consisted of estimating the wind energy potential for the 32 provinces at a height of 10 m using open-access geographic reference systems tools provided by NASA. In the second phase, 28 stakeholders were identified through snowball sampling. The Responsible, Accountable, Consult, and Informed (RACI) matrix tool was applied to identify the roles of the 28 institutions addressed at the country level as relevant in the decision-making process for the energy sector. The annual average wind speed and energy potential for each province were determined. It was found 24 provinces have poor potential, below &lt;4.5 m/s. In the northwest and east is where there is the greatest potential, between 4.83 - 6.63 m/s. The population density was established and was observed that the provinces with greater potential are less densely populated. Through 59 interviews 28 institutions were identified and evaluated due to their relevance in decision-making for the implementation of energy projects. The MEM has strongly categorized as “A”, electricity distribution companies as “R”, energy associations and universities as “C”, and educational and justice institutions as “I”.

Abstract: Coal bed methane (CBM) reservoirs are complex systems whose properties differ from those of conventional reservoirs. Coal seams are dual-porosity systems that comprise the porosities of the matrix and cleat system. Gas in the coal seams can be stored as free gas in the cleat system and as adsorbed gas in the porous medium. The flow mechanisms of the natural gas through the formation include desorption, diffusion, and Darcy’s flow regimes. The permeability of CBM reservoirs is more sensitive to pressure variations than conventional gas reservoirs. To study the flow behavior of CBM reservoirs it is mandatory to use a model that considers their unique characteristics. The objective of this study was to propose a physical and mathematical model of production performance for horizontal wells in CBM reservoirs whose permeability is dependent on pressure. A solution for the model was obtained by applying Pedrosa´s transformation, perturbation theory, Laplace transformation, the point source method, and Sthefest´s algorithm. The solution to this problem was validated with previous work thoroughly. The type curves of the model were built and the pressure transient behavior of the model was analyzed and discussed. The effects of several parameters on pressure behavior were also discussed.

Positive education is seen as a transformative methodological approach capable of improving the act of teaching and learning and, above all, essential for the development of students' personal skills and competences. However, few studies have been carried out on this subject in the field of lifelong and adult education. This study works with a sample of 399 people over 16 years of age and students of the Universidad Popular de Dos Hermanas in order to show the relationship between the Pygmalion effect and learned helplessness in the process of acquiring knowledge in adulthood. In this way, three tools were used: a questionnaire that showed teachers' perceptions of students' qualities and behaviour and two that provided information on self-concept, self-esteem, personal and social skills and other variables directly related to emotional intelligence and positive education. It shows how exposure to negative operational conditioning factors influences the psychosocial and socio-educational development of students in every possible way, while on the other hand, it indicates the importance of positive education to compensate for this phenomenology by improving the development and growth of those who study and participate in non-formal education. Likewise, the factorial interrelation of both positive and negative conditioning factors and their incidence on learning is shown; the importance of neutralising the negative components and strengthening the positive reinforcement and the role played by the community and education professionals as catalysts and behavioural modulators at any stage of learning and age group for the achievement of the objectives of the student and of education itself in a broad sense

Ready-to-eat fresh fruit have an increasing presence in international markets due to its convenience and health benefits. However, these produces are highly perishable and efficient technologies to increase their shelf life are needed. In the present research, different citrus fruit species and cultivars from organic farming were assayed to obtain enzymatically citrus segments. The best results in terms of segment quality were observed for ‘Hernandina’ clementine which was chosen to make a new ready-to-eat produce based on peeled citrus segments packaged in glass jars with slight syrup made on citrus juice and organic sugar cane. The most appreciated syrup was those containing 50-50 (v/v) of ‘Fino’ lemon juice and ‘Hernandina’ clementine based on the sensory scores given by the panellists. In addition, different pasteurization treatments were assayed to preserve the new produce safety and nutritional and sensory quality properties during storage at cold temperature. Results showed that pasteurization treatment at 50 °C for 45 min could be enough to avoid microbial contamination with mesophilic and psychrophilic aerobic bacteria or yeast and mould and to maintain sensory properties until five weeks of storage at 4 °C. In addition, only a 10 % reduction of vitamin C was observed from fresh segments or syrup until the end of storage period, showing that the new ready-to-eat produce would conserve high bioactive compound content and health benefits after pasteurization and prolonged cold storage.

Virtual tours with 360 photos present a quick, easy and accessible way to create immersive experiences. The visualization in diverse devices, provide a user experience that can be different. A virtual tour with 360 photos of the Chapel of Dolores (Tenerife), has been created. Whose access is limited to specific days, so the creation of a virtual tour allows you to visit it at any time, in addition, a pilot test has been carried out with students of the degree of restoration and conservation of cultural heritage in order to measure the user experience of the virtual tour depending on the device used. The participants took a virtual tour of the Dolores Chapel, first with a cell phone and then with the virtual reality headset, and then completed a user experience questionnaire. The results obtained comparing both visualization technologies are detailed, highlighting that when using the virtual reality headset no better results are obtained in the immersion subscale, in addition, the visualization on a Smartphone is more comfortable and obtains better results in consequences such as dizziness and vertigo. Therefore, it may be an interesting strategy to have simple versions that work quickly on the cell phones.

This study assessed the hydrological performance and runoff water quality of 12 green roof (GR) modular systems located at the Universidad de los Andes campus (Bogotá, Colombia). Based on 223 rainfall events spanning a 3-year period, average rainfall retention was 85% (SD = 25%). T-tests, Welch Test, multiple linear regressions and correlation analysis were performed in order to assess the potential effect of air temperature, substrate type, vegetation cover, relative humidity, antecedent dry weather period (ADWP), rainfall duration and rainfall maximum intensity. In some cases, GR design variables (i.e. growing media and type of vegetation) were found to be significant for describing rainfall retention efficiencies and, depending on the GR type, some hydrological variables were also correlated with the rainfall retention. Rainfall and GR runoff were monitored for Total Kjeldahl Nitrogen (TKN), Nitrates, Nitrites, Ammonia, Total Phosphorus (TP), Phosphates, pH, Total Dissolved Solids (TDS), Total Suspended Solids (TSS), Color, Turbidity, Biological Oxygen Demand (BOD), Chemical Oxygen Demand (COD), Total Coliforms, metals and Poliaromatic Hydrocarbons (PAHs). The results obtained confirmed that GR systems have the ability to neutralize pH, but are source of the rest of the aforementioned parameters, excluding PAHs (with concentrations below detection limits), Ammonia, TSS, Se and Li, where differences with reference values (rainfall and plastic panel runoff) were not statistically significant. Substrate type, event size and rainfall regime are relevant variables for explaining runoff water quality.

There has been growing interest in using permanent magnet synchronous motors (PMSMs) for pumping applications to improve energy efficiency. One promising approach for powering these motors in variable speed applications is using modular multilevel cascaded converters based on a Triple-Star Bridge Cell (M3C) due to their inherent fault tolerance capability. However, M3C converters require a more complex control system than simpler converters. For instance, A basic M3C control system for power transmission requires seventeen (17) PI controllers, whose adjustment depends on the M3C’s dynamical model parameters’ value knowledge needing extensive and time-consuming testing to obtain them. To solve this control system issue, we propose an adaptive M3C control system for variable speed drives powering multiple PMSM-driven centrifugal pumps that reduces the number of controllers to six (6). Furthermore, the proposal does not require knowledge of the converter, motor, or load parameters, making it more practical and versatile. The proposal introduces an ad-hoc hybrid passivity-based model reference adaptive controller in cascade with a passivity-based control. It has been validated through theoretical stability proof and comparative simulation results with a basic control system under normal and fault operations. As a result, the proposal effectively follows the required rotor speed while enhancing performance by decreasing the current consumption and recovering from a 10% input phase imbalance, a cell short circuit, and an open cell.

In the present work we propose a dynamical mathematical model of the lung cells inflammation process in response to SARS-CoV-2 infection. In this scenario the main protease Nsp5 enhances the inflammatory process, increasing the levels of NF kB, IL-6, Cox2, and PGE2 with respect to a reference state without the virus. In presence of the virus the translation rates of NF kB and IkB arise to a high constant value, and when the translation rate of IL-6 also increases above the threshold value of 7 pg mL^-1 s^-1 the model predicts a persistent over stimulated immune state with high levels of the cytokine IL-6. Our model shows how such over stimulated immune state becomes autonomous of the signals from other immune cells such as macrophages and lymphocytes, and does not shut down by itself. We also show that in the context of the dynamical model presented here, Dexamethasone or Nimesulide have little effect on such inflammation state of the infected lung cell, and the only form to suppress it is with the inhibition of the activity of the viral protein Nsp5.To that end, our model suggest that drugs like Saquinavir may be useful. In this form, our model suggests that Nsp5 is effectively a central node underlying the severe acute lung inflammation during SARS-CoV-2 infection. The persistent production of IL-6 by lung cells can be one of the causes of the cytokine storm observed in critical patients with COVID19. Nsp5 seems to be the switch to start inflammation, the consequent overproduction of the ACE2 receptor, and an important underlying cause of the most severe cases of COVID19.

Photogrammetry involves aerial photography of the earth’s surface and subsequently processing the images to provide a more accurate depiction of the area (Orthophotography). It’s used by the Spanish Instituto Geográfico Nacional to update road cartography but requires a significant amount of manual labor due to the need to perform visual inspection of all tiled images. Deep Learning techniques (artificial neural networks with more than one hidden layer) can perform road detection but it is still unclear how to find the optimal network architecture. Our system applies grammar guided genetic programming to the search of deep neural network architectures. In this kind of evolutive algorithm all the population individuals (here candidate network architectures) are constrained to rules specified by a grammar that defines valid and useful structural patterns to guide the search process. Grammar used includes well-known complex structures (e.g. Inception-like modules) combined with a custom designed mutation operator (dynamically links the mutation probability to structural diversity). Pilot results show that the system is able to design models for road detection that obtain test accuracies similar to that reached by state of the art models when evaluated over a dataset from the Spanish National Aerial Orthophotography Plan.

Cerebral aneurysms come in a wide range of shapes and sizes, they can evolve over time and present significant changes. It is generally accepted that large aneurysms are more prone to rupture, but the rupture of small aneurysms has also been observed, indicating the presence of additional risks factors. The aim of this study is to assess the effects of the aneurysm size and wall thickness on its rupture risk by using fluid-structure interaction simulations. Six patient-specific geometries were chosen, four were used for studying the size effect and two for studying the thickness effect. Additional cases where the aneurysm was removed were included. It was found that thinner walls suffer from significantly greater stresses, whereas an increment in size means, in general, lower wall shear stress and greater equivalent stress. By removing the aneurysm, it could be noted that at the rupture point, the reduction in the time-averaged wall shear stress was 75%. Although the size of an aneurysm has a great impact in its rupture risk, its wall thickness needs to be considered, since even maintaining its size, the aneurysm could suffer from a thin-ning of its walls that can lead to structural failure.

The objective of this work was the use of goat and sheep liquid whey concentrates (LWCs) produced by ultrafiltration (UF) for the manufacture of frozen yoghurts with or without different concentrations of inulin. In a first step, natural yoghurts using only goat and sheep LWCs as raw material were obtained. One day after production, these yoghurts were used to produce frozen yoghurts with different concentrations of added inulin. The physicochemical charateristics of ewe´s and goat´s yoghurts were significantly different regarding dry matter, protein, fat and minerals. Ewe´s yoghurts were solids while goat´s yoghurts behaved as a viscous liquid. Frozen yoghurts with different levels of inulin addition also presented significant differences concerning physicochemical and microbiological characteristics. Overrun was similar for all formulations except for the one produced with ewe’s LWC containing 5.0% inulin, which presented a significantly higher value. Higher meltdown rates in goat’s whey frozen yoghurts were observed. The survival rates of lactic acid bacteria were lower than data reported for similar products. Concerning sensory acceptance, both products showed encouraging results. It can be considered that the production of frozen yoghurts by using LWCs as main ingredient can be an interesting option to broaden the product’s portfolio of small/medium scale dairy producers.

Due to the irruption of new technologies in cities such as mobile applications, geographic infor-mation systems, Big Data, Internet of Things (IoT) or Artificial Intelligence (AI), new approaches to citizen management are being developed with the aim of adapting citizen services to this new en-vironment. These new services can enable city governments and businesses to offer their citizens a truly immersive experience that facilitates their day-to-day lives and ultimately improves their quality of life. In this sense, it is important to emphasize that all investments in infrastructure and technological developments in smart cities will be wasted if the citizens for whom they have been created eventually do not use them for whatever reason. To avoid these kinds of problems, the citizen's level of adaptation to the technologies should be evaluated. However, although much has been studied about new technological developments, studies to validate the actual impact and user acceptance of these technological models are much more limited. This paper tries to fill this gap presenting a new model of recommender system based in the most cited and used model in the scientific and academic literature: the Technology Acceptance Model (TAM) and using the most cited and agreed upon criteria in the existing literature. To accomplish the objective, this study in-troduces a novel recommender system that utilizes a fuzzy 2-tuple linguistic model in conjunction with the analytic hierarchy process (AHP) method to prioritize and personalize the relationship between tourists and smart cities. The methodology proposed in this paper was tested and validated in a case of study through different clusters to derive global recommendations tailored to each specific cluster. The main findings reveal that the use of technology is closely linked to the ability to enjoy personalized experiences in the realm of Smart Cities and Smart Tourism. As future works, authors recommend extending the recommender system model to any cluster of tourists using the proposed methodology and evaluate also other kind of disruptive technologies such as artificial intelligence (AI) in supporting the citizens.

Ageing wine is a commonly practice used in winemaking since the quality and sensory profile increase due to the extractable compounds coming from wood by means of barrels or chips. The quantitative and qualitative compounds from wood depend on the species, its origins and the treatments applied in cooperages. Traditionally, oak wood species are most often used in cooperage, specifically Quercus alba, Known as American oak and Q. robur and Q. petraea both known as French oak. However, although this stage is very common for red wines, its use is still restricted in the case of white wines. However, this topic is particularly interesting, since due to the sensorial benefits of wood contact, the option for ageing white wines in barrels or chips is increasingly and widely chosen by winemakers. This review compiles the novel strategies applied to white wines by means of wood contact in the last years with the aim to increase wine quality and sensorial features.

Purpose: Young transgender and non-binary are exposed to situations of discrimination and have a greater risk of violence. The purpose of this study is to analyze which protective, violence and health and well-being factors have more influence on transgender and non-binary people compared to cisgender people. Method: The sample comprised 856 people between 14 and 25 years old. A survey including questions about sociodemographic information and protective, violence and health and well-being factors was designed ad hoc for this study. Results: The results show non-binary group received the least support from family and friends, higher risk of suffering cyberbullying and a higher feel isolated and unhappy. Non-binary and transgender have suffered more verbal attacks both inside and outside their school and physical attacks at school than cisgender young. Conclusions: These results are important and may contribute to promote public policies and clinical interventions to favor the integration of non-binary and transgender people in our society.

Background: In PE, the methodology used to develop coeducation must consider the tastes and preferences of students. The purpose of this work was to analyze how teachers work with different aspects of PE classes and how their work is perceived by students. Methods: The sample was formed by 176 teachers and 1,136 secondary school students. The research design was descriptive. The Questionnaire of Coeducational Aspects in Physical Education for teachers and the Questionnaire of Perception of Equality and Discrimination in Physical Education for Students. Results: The different statistical analyses showed significant differences in how male and female teachers assigned responsibility to the students and their control of motor activity space. In regards to the students, significant differences were found between boys and girls in their opinions of how their teachers apply the same rules to all the students. Conclusions: No differences exist between male and female teachers in regards to their utilization neither of materials and sexist language or in their evaluation and feedback given to the students. In regards to the students, girls perceive to a greater extent than their male counterparts that the activities in PE classes promote equality in the improvement of their capacities.

This study presents the design and implementation of a PLC microprocessor adhering to the IEC-61131-3 standard, executed on a Cyclone-V FPGA using a DE10-NANO development board. Our microprocessor optimizes the central processing unit by streamlining the data path, achieving a remarkable simulated response time of approximately 60 ns, equivalent to three clock cycles at a 50MHz frequency for Boolean operations. To substantiate our approach, we conducted practical experiments utilizing a FESTO conveyor station, employing relays as actuators, and incorporating optical and inductive sensors. The results underscore the feasibility of our proposed approach and serve as practical validation of its efficacy. This work introduces a promising avenue for the development of cost-effective PLCs employing SoC FPGA variants. Additionally, a thorough comparison of execution times with other early reported architectures. Our microprocessor outperforms even well-established PLCs like the S7-312, with substantial reductions in execution times of 94.54% for floating-point operations, 71.42% to 93.33% for word operations, and up to 78.57% for bit operations.

We are all similar, but a bit different. These differences are partially due to variations in our genomes and are related to the heterogeneity of symptoms and responses to treatments that patients exhibit. Most animal studies are performed in one single strain with one manipulation. However, due to the lack of variability, therapies are not always reproducible when treatments are translated to humans. Panels of already sequenced organisms are valuable tools for mimicking human phenotypic heterogeneities and gene mapping. This review summarizes the current knowledge of mouse, fly and yeast panels with insightful applications for translational research.

Biosurfactants (BSs) are microbial compounds that have emerged as potential alternatives to chemical surfactants due to their multifunctional properties, sustainability, and biodegradability. Owing to their amphipathic nature and distinctive structural arrangement, biosurfactants exhibit a range of physicochemical properties, including excellent surface activity, efficient critical micelle concentration, humectant properties, foaming and cleaning abilities and the capacity to form microemulsions. Furthermore, numerous biosurfactants display additional biological characteristics, such as antibacterial, antifungal, and antiviral effects, antioxidant, anticancer, and immunomodulatory activities. Over the past two decades, numerous studies have explored their potential applications, including pharmaceuticals, cosmetics, antimicrobial and antibiofilm agents, wound healing, anticancer treatments, immune system modulators and drug/gene carriers. These applications are particularly important in addressing challenges such as antimicrobial resistance and biofilm formation in clinical, hygiene, and therapeutic settings. They can also serve as coating agents for surfaces, enabling antiadhesive, suppression, or eradication strategies. Not least importantly, biosurfactants have shown compatibility with various drug formulations, including nanoparticles, liposomes, micro and nanoemulsions, and hydrogels, improving drug solubility, stability, and bioavailability and enabling targeted and controlled drug release. These qualities make biosurfactants promising candidates for the development of next-generation antimicrobial, antibiofilm, anticancer, wound healing, immunomodulating, drug or gene delivery agents, as well as adjuvants to other antibiotics. Analyzing recent literature, this review aims to provide insights into the present understanding, highlight emerging trends, identify promising directions and advancements in the utilization of biosurfactants within the pharmaceutical and biomedical fields.

High Resolution Melting Analysis (HRM) has been pointed as a suitable alternative method to detect and identify Leishmania species. Herein, we aimed to evaluate the sensitivity, specificity, accuracy, and limitations of a HSP70-HRM protocol both as a diagnostic scheme applied in clinical samples and as a species typing tool for laboratory research and reference services. Our data reveal the pronounced species-typing potential of the HSP70-HRM in DNA from cultured parasites. For clinical samples, however, we advise caution due to the parasite load-dependent accuracy. In the light of these findings and considering the importance of parasite load determination for clinical and research purposes we recommend the integration of the presented typing scheme and the previously published Leishmania quantifying approach as combined tools for clinicians, surveillance, and research.

Wildfires are important sources of landscape change in Mediterranean environments, creating large patches of natural habitats (i.e., scrublands) inside protected areas, whereas woodland patches remained at the border in the vicinity of human settlements. Landscape patterns resulting from these gradients influence habitat suitability for mesocarnivores regarding food and shelter. In winter and summer 2019, we sampled 16 independent line-transects of four camera traps each (for a total of 64 cameras), covering the main habitats of the study area (woodlands, scrublands, and crops). Cameras were baited to compensate for low detectability of target species, and mesocarnivore contacts were analyzed by means of GLMMs and occupancy models. We hypothesized that Mediterranean mesocarnivores were constrained by two opposing forces, pushing them living in semi-natural but highly fragmented and heterogeneous landscapes created by humans, or living in natural but less suitable and continuous habitats created by fire regimes. In the former case, mesocarnivores will find protection against predators and resting sites in forests, as well as improved food opportunities in crops and urban areas, despite the possible interference with humans and their pets. Potential cascading effects linked to ecological roles of Mediterranean mesocarnivores on the succession of Mediterranean landscapes would imply longer-term effects of human disturbance on landscape trends.

Inertial focusing conditions of fluorescent polystyrene spherical particles are studied at the pointwise level along their pathlines. This is accomplished by an algorithm that calculates a de-gree of spreading function of the particles' trajectories taking streaklines images as raw data. Different confinement ratios of the particles and flow rates are studied and the results are pre-sented in state diagrams showing the focusing degree of the particles in terms of their position within a curve of an asymmetric serpentine and the applied flow rate. In addition, together with numerical simulation results, we present empirical evidence that the preferred trajectories of inertially focused spheres are contained within Dean vortices' centerlines. We speculate about the existence of a new force, never postulated before, to explain this fact.

The dynamics of a spherical particle in an asymmetric serpentine is studied by finite element method (FEM) simulations in a physically unconstrained system. The two-way coupled time dependent solutions illustrate the path of the particle along a curve where a secondary flow (Dean flow) has developed. The simulated conditions were adjusted to match those of an experiment for which particles were focused under inertial focusing conditions. The obtained rotational modes allowed to infer the influence of the local flow around the particle. We propose a new approach to find the decoupled secondary flow contribution employing a quasi-Stokes flow.

Background: our purpose is to assess the effectiveness and safety of sacubitril/valsartan (SV) in “real-world” patients with heart failure and reduced ejection fraction (HFrEF), including a broader spectrum of patients than those in clinical trials and evaluating variables not previously described in the literature. Methods: real-world study in HFrEF patients (N:204), both in and out-patients, who started SV between October 2017 and December 2018. We performed a prospective analysis with a 12-month follow-up. The study outcomes were effectiveness and safety, measured by individual parameters and combined endpoints, comparing the pre and post practice periods. Results: at the end of follow-up, an improvement of left ventricle ejection fraction (LVEF): 29.8% vs 33.7; p<0.0001, a decrease in NT-proBNP levels (3928 pg/mL vs 2902 pg/mL; p=0.012), number of hospital admissions (141 vs 35; p<0.0001) and percentage of patients with implantable cardioverter defibrillator (ICD) indication (79.9% vs 49.5%; p<0.0001) were observed. Of our population, 81.3% met a combined efficacy endpoint (defined by increase of LVEF, reduction of hospital admission or improvement in functional class). No differences were observed in parameters regarding safety. Conclusions: Sacubitril/valsartan has brought about a revolution in the therapeutic management of HFrEF patients and its use may raise questions about what is considered "optimal medical therapy" prior to implantation of cardiac devices.

This article discusses the use of a hand held electronic nose to obtain information on the presence of some aromatic defects in natural cork stoppers, such as haloanisoles, alkylmethoxypyrazines and ketones. The proposed prototype has been developed as an instrumentation system with up to eight commercial gas sensors. Machine learning algorithms such as k-nearest neighbors and artificial neural networks has been used. The use of this system tries to improve the current aromatic defect detection process in the cork stopper industry, which is done by gas chromatography or human test panels.

Aim: To perform a descriptive analysis of eating patterns and biophysical conditions of previously diagnosed and currently under treatment individuals from a semi-urban Mayan community of Yucatan, and to contrast them with T2DM therapeutic guidelines. Methods: The present study is derived from a randomized clinical trial conducted at Komchen, Yucatan. Participants’ diagnosed with T2DM were included. A 24-hour dietary recall, anthropometric parameters (weight, visceral fat, height, and waist circumference), biochemical (HbA1c) and clinical (blood pressure) variables were evaluated and compared via hypothesis test with T2DM treatment cut-off points (based on World Health Organization criteria). Results: Anthropometric characteristics differ significantly from the ideal criteria. Obesity prevalence within women with T2DM was 92.9%. Only 21% of the participants were under T2DM control (≤7%). Energy and carbohydrates consumption, significantly exceed therapeutic guidelines, whereas protein, fat, and fiber intake were lower than the recommendations. Conclusions: Komchen’s diet, concomitantly with food characteristics, could be related to glycemic decontrol. There is a disproportion in macronutrients consumption in favor of carbohydrates, probably associated with socioeconomic limitations, food availability, and price. Developing nutritional assistance programs which contemplate cultural and economic factors in this Mayan population must be taken into consideration.

Since smart cities aim at becoming self-monitoring and self-response systems, their deployment relies on close resource monitoring through large-scale urban sensing. The subsequent gathering of massive amounts of data makes essential the development of event filtering mechanisms that enable the selection of what is relevant and trustworthy. Due to the rise of mobile event producers, location information has become a valuable filtering criterion as it not only offers extra information on the event described but also enhances trust on the producer. Implementing mechanisms that validate the quality of location information becomes then imperative. The lack of such strategies in cloud architectures compels the adoption of new communication schemes for IoT-based urban services. To serve the demand for location verification in urban event-based systems (DEBS), we have designed three different fog architectures that combine proximity and cloud communication. Moreover, we have successfully assessed their performance using network simulations with realistic urban traces.

The search for new food products that promote consumers health has always been of great interest. The dairy industry is perhaps the best example regarding the emergence of new products with claimed health benefits. Cheese whey (CW), the by-product resulting from cheese production, and second cheese whey (SCW), which is the by-product of whey cheese manufacture, have proven to be potential ingredients for the development of food products with improved nutritional characteristics and other functionalities. Nowadays, due to their nutritional quality, whey products have gained a prominent position among healthy food products. However, for long, CW and SCW were usually treated as waste or as animal feed. Due to their high organic content, these by-products can cause serious environmental problems if discarded without appropriate treatment. Small and medium size dairy companies do not have equipment and structure to process whey and second cheese whey. In these cases, generally, they are used for animal feed or discarded without an appropriate treatment, being the cause of several constraints. There are several studies regarding CW valorization and there is a wide range of whey products in the market. However, in the case of SCW remains a lack of studies regarding its nutritional and functional properties, as well as ways to reuse this by-product in order to create economic value and reduce environmental impacts associated to its disposal.