Climate change and development have increased urban flooding, requiring modernization of stormwater infrastructure. Retrofitting standard passive systems with controllable valves/pumps is promising, but requires real-time control (RTC). One method of automating RTC is reinforcement learning (RL), a general technique for sequential optimization and control in uncertain environments. The notion is that an RL algorithm can use inputs of real-time flood data and rainfall forecasts to learn a policy for controlling the stormwater infrastructure to minimize measures of flooding. In real-world conditions, rainfall forecasts and other state information, are subject to noise and uncertainty. To account for these characteristics of the problem data, we implemented Deep Deterministic Policy Gradient (DDPG), an RL algorithm that is distinguished by its capability to handle noise in the input data. DDPG implementations were trained and tested against a passive flood control policy. Three primary cases were studied: (i) perfect data, (ii) imperfect rainfall forecasts, and (iii) imperfect water level and forecast data. Rainfall episodes (100) that caused flooding in the passive system were selected from 10 years of observations in Norfolk, Virginia, USA; 85 randomly selected episodes were used for training and the remaining 15 unseen episodes served as test cases. Compared to the passive system, all RL implementations reduced flooding volume by 70.5% on average, and performed within a range of 5%. This suggests that DDPG is robust to noisy input data, which is essential knowledge to advance the real-world applicability of RL for stormwater RTC.

Abstract: The objective of Peter Chew Triangle Diagram is to clearly illustrate the topic solution of triangle and provide a complete design for the knowledge of AI age. Peter Chew's triangle diagram will suggest a better single rule that allows us to solve any problem of topic solution of triangle simple , directly and more accurately. There are two important rules for solving the topic solution of triangle today [1,2], namely the sine rule and the cosine rule. The sine rule is used to find a non-included angle when are given two sides and a non-included angle or the opposite side angle given when are given two angles and one side. The cosine rule normally is used to find the included angle when are given three sides or the third side when are given two sides and the included angle. Peter Chew Method[3] allow us to find the third side simple and directly when given two sides and a non-included angle. Peter Chew rule [4] allow us to find a non included angle simple, directly and more accurately when given 2 sides and an included angle. Aply Peter Chew Triangle Diagram to Education 4.0 Calculator , Peter Chew Triangle Diagram Calculator allows the Calculator to solve any problems in the topic solution of triangle simple, directly and more accurate. This can be effective in increasing students' interest in using technology while learning mathematics and will help in the learning of mathematics, especially when similar covid-19 issues arise in the future.

The exact dynamics of emergence remains one of the most prominent outstanding questions for the field of complexity science. I first discuss various perspectives on emergence in various contexts, then offer a different perspective on understanding emergence in a graph-theoretic representation. From the discussion, an observer’s choice in state space seems to have an effect for that observer to detect emergent behavior. To test these ideas, I analyze the dynamics of all possible spatial state spaces near the critical temperature in an Ising model. As a result, state space topologies that appear more deterministic flip more bits than topologies that appear more random, which is contrary to our intuitions about randomness. In addition, the size of different state spaces constrain a system’s ability to explore various states within the same time frame. These results are important to understanding emergent phenomena in biological systems, which are layered with various state spaces and observational perspectives.

Keywords: lactic acid; ceramide; folate; nicotinamide; Alzheimer’s disease

Free-living terrestrial mites (Acari) have persisted through numerous glacial cycles in Antarctica. Very little is known, however, of their genetic diversity and distribution, particularly within the Ross Sea region. To redress this gap, we sampled for mites throughout the Ross Sea region, East Antarctica, including Victoria Land and the Queen Maud Mountains (QMM), covering a latitudinal range of 72-85oS, as well as from Lauft Island near Mt Siple (73oS) in West Antarctica and Macquarie Island (54oS) in the sub-Antarctic. We assessed genetic diversity using mitochondrial cytochrome c oxidase subunit I gene sequences (COI-5P DNA barcode region), and also morphologically identified voucher specimens. We obtained 130 sequences representing four genera: Nanorchestes (n = 30 sequences), Stereotydeus (n = 46), Coccorhagidia (n = 18) and Eupodes (n = 36). Tree-based analyses (maximum likelihood) revealed 13 genetic clusters, representing as many as 23 putative species indicated by Barcode Index Numbers (BINs) from the Barcode of Life Datasystems (BOLD) database. We found evidence for geographically-isolated cryptic species, e.g. within Stereotydeus belli and S. punctatus, as well as unique genetic groups occurring in sympatry (e.g. Nanorchestes spp. in QMM). Collectively, these data confirm high genetic divergence as a consequence of geographic isolation over evolutionary timescales. From a conservation perspective, additional targeted sampling of understudied areas in the Ross Sea region should be prioritised, as further diversity is likely to be found for these short-range endemic mites.

This research work was aimed at investigating and determining the depth resolution of a 500Mhz GPR Antenna. The survey was conducted in an open space at the Physics Department, College of science-KNUST. The MALA GPR equipment with 500MHz shielded Antenna in the common offset-mode was used to investigate the depth at which materials were buried. Concrete block, tree roots, plastic bottle with water, glass bottle and Electric wire were each buried in cavities with five different burial depths. The real depth of each material was measured both along and across the cavity and compared to their corresponding GPR measured depth. The comparison of the Real depth and the GPR depth showed almost identical depth measurements with a root mean square deviation of 0.028m. The implication of this is that the 500 Mhz GPR antenna can accurately locate and detect the position of buried materials in the subsurface at a depth within the range (0.20-0.66) m.

Background and Aims Insulin resistance is pivotal in the pathogenesis of Metabolic Syndrome (MetS), which predisposes to both type 2 diabetes mellitus (T2DM) and premature atherosclerotic cardiovascular disease (ASCVD). The triglyceride-glucose index (Ty-G index), a validated measure of insulin resistance also predicts MetS, T2DM, severity of albuminuria and ASCVD. There is scantly data providing mechanistic insights into these sequalae. Accordingly, we investigated the relationship between the TyG index and biomarkers of inflammation, oxidative stress, free fatty acids (FFA) levels and adipokine dysregulation in a cohort comprising both controls and patients with nascent MetS. Patients and Methods Participants included 47 patients with MetS and 41 controls. Persons with diabetes, ASCVD, smoking and macro-inflammation were excluded. Fasting blood was obtained for both plasma and monocyte isolation. Results: Receiver operating Characteristic (ROC) curve analysis revealed that TyG index was an excellent predictor of MetS with an area under the curve of 0.87 and it correlated with both hepatic and adipose tissue insulin ressitance .Both serum FFA levels and non-HDL-cholesterol increased significantly over tertiles of TyG index. Based on TyG index tertiles and or correlations, C reactive protein, endotoxin, chemerin , interleukin-6 levels and monocyte toll-like receptor (TLR)- 4 and TLR-2 and their cellular signaling were significantly associated with TyG index . Conclusion: Increased non-HDL-C and most importantly a pro-inflammatory state evidenced by both circulating and cellular biomarkers could be advanced as potential mechanisms explaining the increased risk for T2DM and ASCVD.

What drives an individual police officer to activate his body-worn camera (BWC)? Some evidence suggests officer attitudes and resistance to the technology contributes to the equivocal results in studies testing for BWCs effect on use-of-force, complaints, and other outcomes of interest. Leveraging a novel survey and administrative dataset, we investigate the predictors of BWC activation among 147 police officers in a single agency. With a test of three nested models, we find job function covariates offer robust predictive power of how often an officer activates her or his BWC. Neither demographic nor attitudinal measures significantly predict BWC activations, except for a negative relationship with how officers perceive BWC impacts on professional discretion. The study furnishes empirical support for understanding officers as Principled Agents: job function, guided by administrative policy is the most explanatory and parsimonious, while models of attitudes and demographics fail to improve upon the job function model.

In this paper is discussed sediment transport as a mechanical process that characterises a natural stream or channel flow regime. The objective of experimental work presented in this paper is to recall and to give another prospect of well-known Meyer-Peter and Müller approach for estimation of Shield’s number (θ_c,θ) in laboratory conditions, and calibration of dimensionless MPM number (A). For this purpose two different experiments are conducted, during the first experiment water amount flushed on the flume and bed slope was changed simultaneously until equilibrium state is achieved, meanwhile is estimated the critical Shield’s number (θ_c). While, during the second experiment, water amount was kept constant, only bed slope of flume was continuously tilted, meanwhile sediment, discharge and Shield’s number (θ) was determined for given hydraulic conditions. In addition calibration of dimensionless MPM number (A) was performed, where several iteration were considered until for (A=3.42), sediment discharge measured become almost equal with sediment discharge computed by using MPM formula. After these experiments, is concluded that MPM formula can be used also for other certain initial condition and similar procedure may be adopted to calibrate the dimensionless MPM number (A) .

Molnupiravir, a prodrug known for its broad antiviral activity, demonstrated efficacy in animal models of Covid-19, prompting clinical trials where initial results indicated a significant effect against the disease. However, subsequent clinical studies did not confirm these findings, leading to the rejection of molnupiravir for permanent market authorization in many countries. This report critically assessed 19 studies published in 17 reports that investigated the efficacy of molnupiravir in animal models of Covid-19 with the purpose of determining how well the design of these models informed human studies. We found that the administered doses of molnupiravir in most studies involving animal Covid-19 models were disproportionately higher than the dose rec-ommended for human use. Specifically, when adjusted for body surface area, half of the doses of molnupiravir used in the animal studies were more than twice as high as the human dose. Addi-tionally, the drug was frequently given prophylactically or shortly after SARS-CoV-2 inoculation in these models, in contrast to clinical trials where such timing is not consistently achieved. Furthermore, the recommended five-day treatment duration for humans was exceeded in several animal studies. Collectively, we suggest that these design elements in the reported animal studies contributed to a bias favoring molnupiravir, and thus inflated expectations for its efficacy against Covid-19. Addressing these elements may offer avenues to enhance the clinical efficacy of mol-nupiravir for treatment of Covid-19 that include dose increment, early treatment, and admin-istration by inhalation along with use of molnupiravir in antiviral combination therapy.

This study provides a comprehensive comparison of the Peter Chew Sum method and Newton's Sum in Quadratic Root Function Computations. Both methods offer significant advancements by alleviating the need for memorization of multiple formulas. However, when confronted with higher-order quadratic root functions such as the calculation of power 33. Newton's Sum method proves cumbersome due to its requirement of all previous answers for final computation, leading to increased steps and error risks. In contrast, the Peter Chew Sum method simplifies the computational process by requiring only a few previous answers, resulting in a more straightforward series of operations. We contextualize our analysis within the historical progression of mathematical techniques, highlighting the transformative leap represented by the Peter Chew Sum method in quadratic root function computations. Peter Chew Sum addressing the limitations of Newton's Sum , especially concerning higher-order functions such as the calculation of power 256. Furthermore, study demonstrates that the innovative approach of the Peter Chew Sum method not only simplifies complex computations but also fosters enhanced conceptual understanding among students. In conclusion, study findings underscore the profound impact of the Peter Chew Sum method on quadratic root function computations.

Computational methods are essential to support and advance nuclear technologies due to the hazards of handling and analysing highly radioactive materials such as spent nuclear fuel (SNF). However, many such methods, including those thatcan predict SNF compositions and decay heat parameters, require expensive, proprietary software, alongside significant programming experience and computational power for utilisation, severely limiting availability of data and hampering research throughput. Although some datasets are available, many are incomplete or only cover certain fuel systems for older reactor types. Research investigating new methods for SNF recycling, for example, requires compositional and decay heat data for fuel systems not covered by extant data, though analogous source data may be available. With this in mind, we have developed a simple, accessible, and flexible method for extrapolation of isotopic, elemental, and decayheat compositions for SNF at discharge and following decay storage before recycling, based on an extant dataset. This semi-empirical method uses physical and mathematical first principles and can be performed using software accessible to all researchers. This provides outputs accurate to within 1% of reference values interpolated within the range of available data for isotopic compositions, with sensible extrapolations at higher burnups beyond those reported, withoverall elemental outputs accurate to within 0.1%of expected totals. In this publication, we present the developmental methodology, some sample data, the present limitations, and options for future development and expansion of functionality.

We seek to examine effective collaboration when engaging in value cocreation with the customer for mobile financial services in EMs. Our study is a motivation for multi-stakeholder engagement in value cocreation with financial inclusion of all consumers including marginalized populations. Furthermore, our work discovers that social sustainability is a product of social creativity and results in financial inclusion. We apply a qualitative descriptive methodology utilizing exemplars from extant research and phenomenology to analyze the data from the contexts of Ghana and Kenya. The results show that value is co-created for mobile financial services in networks in emerging markets when actors integrate resources for social and environmental sustainability as essential elements for mobile financial inclusion.

Emerging autologous cellular therapies that utilize platelet-rich plasma (PRP) applications have the potential to play adjunctive roles in a variety of regenerative medicine treatment plans. There is a global unmet need for tissue repair strategies to treat musculoskeletal (MSK) and spinal disorders, osteoarthritis (OA), and patients with chronic complex and recalcitrant wounds. PRP therapy is based on the fact that platelet growth factors (PGFs) support the three phases of wound healing and repair cascade (inflammation, proliferation, remodeling). Many different PRP formulations have been evaluated, originating from human, in vitro, and animal studies. However, recommendations from in vitro and animal research often lead to different clinical outcomes because it is difficult to translate non-clinical study outcomes and methodology recommendations to human clinical treatment protocols. In recent years, progress has been made in understanding PRP technology and the concepts for bioformulation, and new research directives and new indications have been suggested. In this review, we will discuss recent developments regarding PRP preparation and composition regarding platelet dosing, leukocyte activities concerning innate and adaptive immunomodulation, serotonin (5-HT) effects and pain killing. Furthermore, we discuss PRP mechanisms related to inflammation and angiogenesis in tissue repair and regenerative processes. Lastly, we will review the effect of certain drugs on PRP activity, and the combination of PRP and rehabilitation protocols.

Plant-based diets are increasingly popular for health as well as financial, ethical, and religious reasons. The medical literature clearly demonstrates that plant-based diets can be both nutritionally sufficient and medically beneficial. However, any person on an intentionally restrictive but poorly-informed diet may predispose themselves to clinically-relevant nutritional deficiencies. For persons on a poorly-informed plant-based diet, deficiencies are possible in both macronutrients (protein, essential fatty acids) and micronutrients (vitamin B12, iron, calcium, zinc and vitamin D). Practitioner evaluation of symptomatic patients on a plant-based diet requires special consideration of 7 key nutrient concerns for plant-based diets. This article translates these concerns into 7 practical questions that all practitioners can introduce into their patient assessments and clinical reasoning. Ideally, persons on plant-based diets should be able to answer these 7 questions. Each serves as a heuristic prompt for both clinician and patient attentiveness to a complete diet. As such, these 7 questions support increased patient nutrition knowledge and practitioner capacity to counsel, refer, and appropriately focus clinical resources.

In this article, we present solutions for one of the oldest mathematical problems, the Collatz Conjecture, and provide a proof for the Riemann Hypothesis, utilizing a new number theory based on newly discovered number properties, which will also be presented in this paper. This is made possible through the Sophy-Peter mathematical framework, built upon this new number theory. The Collatz Conjecture will be disproven, but as an alternative, the Oscillating Theorem will be introduced, with its correctness proven within this article. Furthermore, we present the general version of the Riemann zeta function, developed based on the new number theory. The correctness of this function is verified by comparing it with existing results of the zeta function. Using this approach and the Sophy-Peter framework, we have successfully proven the Riemann Hypothesis, long considered a millennium problem. Moreover, since the general zeta function is proven, this implies the correctness of the new number theory and the Sophy-Peter framework.

Introduction Livestock abortigenic agents, which are microorganisms that lead to premature foetal death and expulsion before completion of the gestation period, are common in Africa and Asia. Abortion events cause economic losses by lowering reproduction (and hence herd/flock sizes) and effects on milk production. Despite the importance of livestock production for food security and livelihoods of millions of the world’s poorest communities, very little is known about the scale, magnitude or causes of livestock abortion in Africa. The aim of this review was to determine the current status of the burden of livestock abortion and surveillance measures adopted for livestock abortigenic pathogens in Africa and Asia, and to explore feasible surveillance technologies. Methodology A systematic literature search was conducted using Preferred Reporting of Systematic Reviews and Meta-analyses (PRISMA) guidelines in four databases for studies published between 1 Jan 1990 and 31 July 2021 that reported epidemiological surveys of livestock abortigenic pathogens in cattle, goats and sheep in Africa and Asia including; Brucella spp., Neospora caninum, Toxoplasma gondii, Rift valley fever virus, Coxiella burnetii, Chlamydia, Leptospira and Bovine viral Diarrhoea Virus. A meta-analysis was used to estimate the species-specific prevalence of the abortigenic diseases and the region where they were detected. Results In the systematic literature search, 48 full papers were included which in total included 50 species-specific surveillance reports from Africa and 19 from Asia. Adjusted median seroprevalence calculations estimated Brucella at 6.85% (range 1.2-11.6) of 9071 sheep, 3.35% (range 0.90-5.40) of 17,007 goats, 8.95% (range 0.50-63.60) of 171,733 cattle, Neospora at 6.80% (range 6.80 -6.80) of 555 sheep, 10.80 (range 10.80-10.80) of 185 goats, 12.65% (range 3.40- 25.60) of 3775 cattle, Toxoplasma at 27.50% (range 1.40 – 75.90) of 2284 sheep, 32.0% (range 20.00- 64.80) of 1226 goats, 7.50% (range 7.50 - 7.50) of 174 cattle, Coxiella at 9.20 (range 9.20 – 9.20) of 184 sheep, 24.20% (range 24.20-24.20) of 91 goats, 13.80% (range 13.80-13.80) of 217 cattle, Rift valley fever virus at 7.70 (2.40-40.00) of 874 sheep, 20.95 (range 2.50-40.00) of 547 goats, 7.45% (range 3.60-11.30) of 309 cattle, Bovine viral diarrhea virus at 78.90 (range 78.90 – 78.90) of 398 cattle, Leptospira at 70.50 (range 70.50 – 70.50) of 373 cattle and Chlamydia at 6.60 (6.60-6.60) of 803 sheep. We found that most studies, 45 (89%) used serological surveys, 1 (2%) used molecular and 1 (2%) reported to have used Mobile-phone based surveillance approach. Three studies (6.25%) of the 48 included were embedded in the national surveillance programs of the respective countries they were conducted, majority 89% were stand-alone cross-sectional studies. Conclusion In conclusion, livestock abortigenic pathogens are still a burden in many African and Asian countries.

Exercising surds to represent figures is a common practice in scientific and Engineering fields, especially in scripts where calculators are banned or unapproachable. Peter Chew Theorem make result becomes simple when dealing with converting Quadratic Surds. The substance of the Peter Chew Theorem lies in enabling the forthcoming generation to simple break problems related to Quadratic Surds more effectively, easing a direct comparison with contemporary results. By employing the Peter Chew Theorem, one can streamline the tutoring and literacy of math, particularly concerning second- order direct equations with constant portions. This theorem's objective aligns with Albert Einstein's famed quotation Everything should be made as simple as possible, but not simpler.

This paper discusses the tectonics of the St. Peter and St. Paul Archipelago (SPSPA) in the Equato-rial Atlantic Ocean, based on the joint-system geometry which show a North-South shorten-ing/transpressional uplift tectonism, is active leading to exhumation of the sub-oceanic mantle. These islets are the summits of a sigmoidal submarine ridge formed by mantle ultramafic rocks. The ridge is crossed by the principal transform deformation zone of the northern transform fault of the St. Paul Multifault System. The South flank ridge exposes serpentinized mantle perido-tites, while the North flank exposes strongly deformed/fractured ultramylonites, recording duc-tile and brittle deformation at lithospheric conditions. The SPSPA show multiple joint systems cutting mylonitic foliation of the exposed rocks, forming three main families: high-angle paral-lel joints of tectonic origin, serpentinization-related joints with random direction and load-release low-angle parallel joints. The tectonic joints show an average direction of N31°E and N28°W, forming a conjugate system with a N1ºW compression axes, coherent with a trans-pressive stress field. Accordingly, the earthquakes focal mechanism close to the islets also shows N-S compression. The previously reported active uplift with an average rate of 1.5 mm/year and the directions of the joint system here reported agreeing with a present-day active N-S compres-sive field at a high angle with the direction of the transform fault.

Sustainable continuous cover forestry is defined and analyzed in several ways. The differential equation representing growth of the basal areas of individual trees, motivated by fundamental biological production theory by Lohmander (2017a), is analyzed and extended in different directions. From the solution of the differential equation, the basal area and the tree diameter are obtained as explicit functions of time. The diameter is a strictly increasing function of time. In the absence of competitors, the diameter increment is shown to be a strictly decreasing function of time. Hence, the diameter increment can also be interpreted as a strictly decreasing function of the diameter. Alternative forms of adjustment of the differential equation, with consideration of competition, are defined. If the competition is strong, with large trees in the vicinity of a particular tree, then the basal area increment, and the diameter increment, are reduced. The growth of a large tree is less sensitive than the growth of a small tree, to competition from other trees. Under strong competition, the basal area increment, and the diameter increment, are strictly concave functions of the size of the tree. The unique maximum of the diameter increment occurs at a higher diameter, if the competition increases. In dynamic equilibrium, the tree size frequency distribution is stationary. If natural tree mortality can be avoided via the harvest strategy, the tree size frequency distribution is a function of the size and competition dependent growth function, and the harvest strategy. Empirical tree size frequency data are used to simultaneously estimate parameters of a size and competition dependent growth function and the applied harvest strategy, via nonlinear optimization. The properties of the estimated growth function are consistent with the corresponding properties of the production theoretically motivated hypothetical function, and the properties of the estimated harvest strategy confirm the corresponding hypotheses. The R2 of the nonlinear regression exceeds 0.97. With access to an empirically estimated equilibrium tree size distribution, it is possible to: 1. Estimate size frequency relevant parameters of tree size and competition dependent growth functions for individual trees. 2. Estimate the applied harvest strategy. 3. Explain and reproduce the empirically estimated tree size equilibrium distribution.

Children with hearing loss have been found to have significantly more behavioral and emotional challenges than their typically hearing peers, though these outcomes are variable at the individual level. Working memory deficits have been found to relate to executive functioning and overall emotion regulation, leading to behavior challenges. Language development is essential for development of social relationships and communicating one’s needs - this may lead to distress when children cannot communicate effectively. Based on prior findings in children with hearing loss and their typically hearing peers, working memory and language skills were hypothesized to be related to parent and teacher report of socioemotional functioning. Participants were 35 children with hearing loss (66% female, M = 5.17 years old, SD = ±1.97) whose language, working memory, and socioemotional functioning were evaluated during the course of treatment and educational planning. Bivariate analyses indicated that working memory was related to a number of socioemotional domains (e.g., functional communication, atypicality, withdrawal), as were language scores (e.g., social skills, inattention). The direction of these associations was such that stronger working memory and language skills were related to more regulated socioemotional functioning. A call to action of the current study includes more education with regard to profiles and presentations of children with hearing loss, and an early focus on socioemotional learning to foster the development of regulatory skills.

The study purpose was to train and validate a deep-learning approach to detect micro-scale streetscape features related to pedestrian physical activity. This work innovates by combining computer vision techniques with Google Street View (GSV) images to overcome impediments to conducting audits (e.g., time, safety, and expert labor cost). The EfficientNETB5 architecture was used to build deep-learning models for eight micro-scale features guided by the Microscale Audit of Pedestrian Streetscapes-Mini tool: sidewalks, sidewalk buffers, curb cuts, zebra and line crosswalks, walk signals, bike symbols, and streetlights. We used a train--correct loop, whereby images were trained on a training dataset, evaluated using a separate validation dataset, and trained further until acceptable performance metrics were achieved. Further, we used trained models to audit participant (N=512) neighborhoods in the WalkIT Arizona trial. Correlations were explored between micro-scale features and GIS-measured- and participant reported-macro-scale walkability. Classifier precision, recall, and overall accuracy were all >84%. Total micro-scale was associated with overall macro-scale walkability (r=0.300,p<.001). Positive associations were found between model-detected and self-reported sidewalks (r=0.41,p<.001) and sidewalk buffers (r=0.26,p<.001). Computer vision model results suggest an alternative to trained human raters, allowing for audits of hundreds or thousands of neighborhoods for population surveillance or hypothesis testing.

Poultry farming in Slovakia has a tradition and an irreplaceable position to ensure rational nutrition for the population. In terms of a nutritional value, poultrymeat (Galliformes) contains a high amount of proteins, essential amino acids, essential unsaturated fatty acids, minerals, vitamins and a low fat content. Poultrymeat production has a relatively short reproductive cycle and thus allows regulating the demand and supply. The poultry market also influences the development of domestic consumption. According to the Statistical Office of the Slovak Republic, the consumption of meat has witnessed a persistent increase over the last 10 years. [1] According to the 2023 AVEC (The Voice of European Meat Sector) annual report, the consumption of poultrymeat in Slovakia was 20.0 kg per person per year. The average consumption in the EU-27 (2021) was 23.4 kg, with the countries with the highest consumption being Portugal (37.8 kg), Ireland (36.0 kg), Hungary (33.5 kg) and Spain (29.9 kg). On the other hand, the countries with the lowest consumption of poultrymeat, apart from Slovakia, also include Austria and Greece with a consumption of 21.5, resp. 21.0 kg [2]. The breeding of broiler chickens, as well as the production and placing on the market of poultrymeat must comply with the requirements laid down by legislation, while the compliance is regularly checked by the competent authorities.

Despite the high prevalence of epilepsy in individuals with autism spectrum disorder (ASD) there is little information regarding whether seizure characteristics and treatment effectiveness change across age. Using an on-line survey, seizure characteristics, effectiveness of antiepileptic treatments, comorbidities and ASD diagnosis were collected from individuals with ASD and seizures. We previously reported overall general patterns of treatment effectiveness but did not examine the effect of seizure characteristics or age on antiepileptic treatment effectiveness. Such information would improve the personalized medicine approach to the treatment of seizures in ASD. Survey data from 570 individuals with ASD and clinical seizures were analyzed. Seizure severity (seizure/week) decreased with age of onset of seizures, plateauing in adolescence, with a greater reduction in generalized tonic clonic (GTC) seizures with age. Seizure severity was worse in those with genetic disorders, neurodevelopmental regression (NDR) and poor sleep maintenance. Carbamazepine and oxcarbazepine were reported to be more effective when seizures started in later childhood while surgery and the Atkin’s/Modified Atkin’s Diet (A/MAD) were reported to be more effective when seizures started early in life. A/MAD and the ketogenic diet were reported to be more effective in those with NDR. Interestingly, atypical Landau-Kleffner syndrome was associated with mitochondrial dysfunction and NDR, suggesting a novel syndrome. These interesting findings need to be verified in independent, prospectively collected cohorts, but none-the-less these data provide some insight into novel relationships that may assist in a better understanding of epilepsy in ASD and providing insight into personalizing epilepsy care in ASD.

There is a potential for synergy effects in utilizing CO2 for both enhanced gas recovery (EGR) and geothermal energy extraction (CO2-plume geothermal, CPG) from natural gas reservoirs. This “combined CO2-EGR–CPG system” has been introduced as a feasible approach that constitutes a CO2 Capture double-Utilization and Storage (CCUUS) system. In this study, we carry out reservoir simulations, using TOUGH2, to evaluate the sensitivity of the natural gas recovery, pressure buildup, and geothermal power generation performance of the combined system to various key reservoir and operational parameters. The reservoir parameters include horizontal permeability, permeability anisotropy, reservoir temperature, and pore-size-distribution index; while the operational parameters include wellbore diameter and ambient surface temperature. Using an example of a natural gas reservoir model, we also investigate the effects of different strategies of transitioning from the CO2-EGR stage to the CPG stage on the energy-recovery performance metrics and on the two-phase fluid-flow regime in the production well. The simulation results show that overlapping the CO2-EGR and CPG stages and having a relatively brief period of CO2 injection but no production (which we call the CO2-plume establishment stage) achieves the best overall energy (natural gas and geothermal) recovery performance. Permeability anisotropy and reservoir temperature are the parameters the natural gas recovery performance of the combined system is most sensitive to. The geothermal power generation performance is most sensitive to the reservoir temperature and the production wellbore diameter. The results of this study pave the way for future CPG-based geothermal power-generation optimization studies. For a CO2-EGR–CPG project, the results can be a guide regarding the required accuracy of the reservoir parameters during exploration and data acquisition.

In the cold deserts of the McMurdo Dry Valleys (MDV) the suitability of soil for microbial life is determined by both contemporary processes and legacy effects. Climatic changes and accompanying glacial activity have caused local extinctions and geochemical changes to soil ecosystems over several million years, while high elevation refugia may have escaped these disturbances and existed under relatively stable conditions. This study describes the impact of historical glacial and lacustrine disturbance events on microbial communities across the MDV. Soil bacterial communities from 17 sites representing either putative refugia or sites disturbed during the Last Glacial Maximum (LGM) (22-17kya) were characterized using 16S metabarcoding. Regardless of geographic distance, several putative refugia sites at elevations above 600 meter displayed highly similar microbial communities. At a regional scale, community composition was found to be influenced by elevation and geographic proximity more so than soil geochemical properties. These results suggest that despite the extreme conditions, diverse microbial communities exist in these putative refugia that have presumably remained undisturbed at least through the last glacial maximum. We suggest that similarities in microbial communities can be interpreted as evidence for historical climate legacies on an ecosystem-wide scale.

The rise in population density, vehicle ownership, and urban development has significantly influenced travel demand and altered travel patterns, leading to traffic congestion in rapidly growing urban centers like Accra, Ghana. The traditional approach of expanding roadways to accommodate rising traffic is no longer environmentally sustainable. Instead, emphasis has shifted towards travel demand management (TDM) strategies as a more sustainable solution. This study aimed to investigate a range of TDM strategies that can be adopted in Accra to improve traffic flow through the lenses of everyday road users. The study employed a questionnaire survey and a stratified sampling technique to gather data from 615 respondents for relative importance index (RII) ranking, and Chi-square statistical analysis. The findings reveal that the topmost preferred strategies were mass transit improvements, walking and cycling improvements, and alternative work schedules. Notably, mass transit improvements emerged as the most preferred strategy. The study also unveiled a statistically significant correlation between variables such as age, education level, marital status, income level, and mode of transportation with all selected TDM preferences. However, no significant relationship was found between gender and car ownership with all selected TDM preferences. The study provides valuable insights regarding road users’ preferences for TDM strategies that can aid in planning future urban mobility systems to proactively manage travel demand, alleviate congestion, and promote sustainable transportation options for the city’s residents.

The concentration of all-trans-retinoic acid, the bioactive derivative of vitamin A, is critically important for the optimal performance of numerous physiological processes. Either too little or too much of retinoic acid in developing or adult tissues is equally harmful. All-trans-retinoic acid is produced by the irreversible oxidation of all-trans-retinaldehyde. Thus, the concentration of retinaldehyde as the immediate precursor of retinoic acid has to be tightly controlled. However, the enzymes that produce all-trans-retinaldehyde for retinoic acid biosynthesis and the mechanisms responsible for the control of retinaldehyde levels have not yet been fully defined. The goal of this review is to summarize the current state of knowledge regarding the identities of physiologically relevant retinol dehydrogenases, their enzymatic properties and tissue distribution, and to discuss potential mechanisms for the regulation of the flux from retinol to retinaldehyde.

The estuarine exchange flow increases longitudinal dispersion of passive tracers and traps sinking particles, potentially creating an estuarine turbidity maximum (ETM): a localized maximum of suspended particulate matter concentration in an estuary. The ETM can have many implications - dead zones due to increased turbidity or hypoxia from organic matter decomposition, naval navigation challenges, and other water quality problems. Using timescales, we investigate how the interaction between exchange flow and particle sinking leads to ETMs by modeling a sinking tracer in an idealized box model of the Total Exchange Flow (TEF) first developed by Parker MacCready. Results indicate that the balance of particle sinking and vertical mixing is critical to determining ETM size and location. We then focus on the role of ecology in ETM formation through the use of The Peter-Parker Model: a new biophysical model which combines the TEF box model with a Nutrient-Phytoplankton-Zooplankton-Detritus (NPZD) model, the likes of which were first developed by Peter J.S. Franks. Detritus sinking rates similarly influence detritus peak concentration and location (an ETM), but detritus ETMs occur in a different location than the sinking tracer due to the influence of the biological factors which create a time lag of about 1 day. Lastly, we characterize the flow of the models with a dimensionless parameter that compares timescales and summarizes the dynamics of the sinking tracer in ETM formation and can be used across systems.

Peatlands in Indonesia are one of the world's largest carbon sinks, helping to regulate greenhouse gas emissions and global climate change. Lophostemon suaveolens is a plant found in Papua's endemic peat ecosystem that grows well in wet areas with low fertility. It is geographically dispersed and has the potential for peatland re-habilitation. We present an efficient and reproducible protocol for in vitro multiplication of plantlets using nodal segments and shoot apices collected from plantlets. The Murashige and Skoog (MS) medium was sup-plemented with single and double kinds of PGRs (BAP and NAA). The concentration used in this study is based on the best findings of earlier preliminary research on single PGR treatment (0.5 ml/l BAP and 0.1 ml/l NAA) for the initiation stage. After 3 months of in vitro axillary shoot initiation, elongated shoots from plant-lets were separated from the clumps and multiplied. Until 6 months incubation, the potential multiplication of axillary shoots was determined by counting the number of nodule multiplication coefficients (NMC), shoot length, root length, and number of leaves (6 successive subculture). The highest average per plantlet of NMC (8.4 0.13) was observed in MS medium with a combination of 0.5 ml/l BAP and 0.1 ml/l NAA (double PGRs), with the longest shoots (5.91 0.17 cm), the longest root length (8.83 0.69 cm), and the most leaves (32 0.69). They were cultured in a pH 5 environment with a light photoperiod (40 mol/m2/s intensity) for 16 hours. When BAP and NAA were used together after acclimatization, seedling survival was highest. This is the first report of L. suaveolens in vitro multiplication, and the protocol could be used to propagate this peatland species on a large scale.

Environmental DNA (eDNA) is an increasingly used non-invasive molecular tool for detecting species presence and monitoring populations. In this article, we review the current state of non-avian reptile eDNA work in aquatic systems, as well as present a field experiment on detecting the presence of painted turtle (Chrysemys picta) eDNA. Thus far, turtle and snake eDNA studies have been successful mostly in detecting the presence of these animals in field conditions. However, some instances of low detection rates and non-detection occur for these non-avian reptiles, especially for squamates. We explored this matter by sampling lentic ponds with different densities (0 kg/ha, 6 kg/ha, 9 kg/ha, and 13 kg/ha) of painted turtles over three months, attempting to detect differences in eDNA accumulation using a qPCR assay. Only one sample of the highest density pond readily amplified eDNA. Yet, estimates of eDNA concentration from pond eDNA were rank-order correlated with turtle density. We present a “shedding hypothesis”–the possibility that animals with hard, keratinized integument do not shed as much DNA as mucus-covered organisms–as a potential challenge for turtle eDNA studies. Despite challenges with eDNA inhibition and availability in water samples, we remain hopeful that eDNA can be used to detect freshwater turtles in the field. We provide key recommendations for biologists wishing to use eDNA methods for detecting non-avian reptiles.

Background: Nurses are essential members of the healthcare workforce and were among the first line carers for patients in community and hospital settings during the COVID-19 pandemic. As a result, they were at a heightened risk of contracting the disease, resulting in a significant number of reported deaths among them. Several preventive measures were adopted to contain the spread of this potentially lethal virus. This study aims to explore the knowledge, attitudes, and practices (KAP) of nurses regarding hand hygiene, mask wearing, and social distancing measures in healthcare settings in Barbados during the COVID-19 pandemic. Method: An online survey of nurses working in public hospitals and polyclinics (public primary care clinics) of Barbados from December 2020 to July 2021, was conducted. Participants completed a questionnaire capturing socio-demographic information and knowledge and practices related to hand hygiene, using face masks, and social distancing . Each correct response received one mark. Overall knowledge scores were categorized as poor (<60%), average (60-80%), or good (>80-100%). Results: Of 192 participants, the majority were female (82.8%) and had >5 years of experience (82%). Findings revealed that 45.8% had poor knowledge of hand hygiene, and the knowledge of 43.8% of respondents was average. Multivariable logistic regression showed that, after adjustment for age and gender, registered nurses had 2.1 times increased odds (95% CI 1.0, 4.2) of having good knowledge compared to other nursing categories. Regarding mask-wearing, 53.6% of nurses had average and 27.1% had good knowledge. Multivariable logistic regression showed that, after adjustment for age and gender, registered nurses had 3.3 times increased odds (95% CI 1.5, 7.4) of having good knowledge compared to nursing assistants. 68.6% of respondents followed the correct steps of handwashing every time, and 98.3% wore a mask in public places. More than half of the nurses (51.2%) kept a safe distance from others to avoid spreading SARS-CoV-2; one-third were in a crowded place(s) in the past three months, and 55.8% usually followed guidelines for social isolation as recommended by WHO. Conclusion: The study identified knowledge deficiencies related to hand hygiene and wearing masks among nurses. It is imperative to provide additional training on infection control measures.

Prescribed burning and other active forest management treatments have been proven to be essential for maintaining suitable habitat conditions for many wildlife species, including the federally endangered red-cockaded woodpecker (RCW). This study examines the perception of forest management treatments of recreation users participating in various activities (hunting, hiking/backpacking, camping, off-highway vehicle riding, and canoeing/kayaking) in terms of scenic beauty and recreation satisfaction. We used photographic images to capture various forest management treatments of different intensity levels and times after treatments, and assessed users’ perception of scenic beauty and recreation satisfaction. Results indicated variation among users participating in different recreation activities, but that good quality RCW habitat offered both higher scenic beauty and higher recreation satisfaction than poor quality habitat for most user groups. Finally, recreation satisfaction was statistically equal to perceived scenic beauty from both good and poor-quality RCW habitats for most of the user groups, thus suggesting the importance of scenic beauty on forest sites in determining recreation users’ attainment of visit satisfaction. Findings conclude that forest sites developed as good quality RCW habitat in the present state also offer quality experience to recreation users, thus supporting multi-objective forestry practices in public forests.

The implementation of management systems has become a strategic advantage in achieving business goals, especially in industrial organizations, but the implementation of social responsibility requirements is especially ethical. Large multinational companies have long been developing and, in particular, implementing their own codes of conduct, which include their suppliers, to demonstrate their commitment to Corporate Social Responsibility (CSR). The compliance with CSR requirements from stakeholders is thus extended or intertwined with requirements in established management systems (MSs). The objectives of the study were to (1) analyze the different approaches to CSR in internationally recognized cross-industry and industry-specific standards and codes in different industries; (2) select the most appropriate framework for assessing the degree of applicability of CSR in the selected management systems and develop a methodology for its assessment; (3) apply the proposed methodology (referred to as SRIMS) in the selected areas: automotive industry, research organization, and metallurgical industry; (4) through ANOVA, validate its use for assessing the overall level of CSR applicability in an organization's established management systems. The application of the Bonferroni method confirmed the hypotheses that the developed SRIMS model is a sufficiently appropriate tool for assessing the overall level of applicability of CSR requirements to established MSs.

SARS-CoV-2 continues to widely circulate in populations globally. Underdetection is acknowledged and is problematic when attempting to capture the true prevalence. Seroprevalence studies, where blood samples from a population sample are tested for SARS-CoV-2 antibodies that react to the SARS-CoV-2 virus, are a common method for estimating the proportion of people previously infected with the virus in a given population. However, obtaining reliable estimates from seroprevalence studies is challenging for a number of reasons, and the uncertainty in the results is often overlooked by scientists, policy makers and the media. This paper reviews the methodological issues that arise in designing these studies, and the main sources of uncertainty that affect the results. We discuss the choice of study population, recruitment of subjects, uncertainty surrounding the accuracy of antibody tests themselves, and the relationship between antibodies and infection over time. Understanding these issues can help the reader to interpret and critically evaluate the results of seroprevalence studies.

A proxy war, between a coalition of countries, BLUE and a country, RED, is considered. RED wants to increase the size of the RED territory. BLUE wants to involve more regions in trade and other types of cooperation. GREEN is a small and independent nation that wants to become a member of BLUE. RED attacks GREEN and tries to invade. BLUE decides to give optimal arms support to GREEN. This support can help GREEN in the war against RED and simultaneously reduce the military power of RED, which is valuable to BLUE, also outside this proxy war, since RED may confront BLUE also in other regions. The optimal control problem of dynamic arms support, from the BLUE perspective, is defined in general form. The objective function is a weighted sum of the present value of the free GREEN territory and the present value to BLUE of the net loss of military resources in the RED army. The net loss of RED at a particular point in time is a function of the location of the front line and the size of the mobile GREEN forces behind the RED line. First, it is assumed that the expected net loss is proportional to the force ratio behind the red front line. It is proved that the net loss function is a strictly concave quadratic function of x, the location of the front line. It is also proved that the unique maximum of the net loss function occurs at the same front location, also if the net loss function is proportional to the strength ratio behind the RED lines, raised to any strictly positive exponent. From the BLUE perspective, there is an optimal position of the front. This position is a function of the weights in the objective function and all other parameters. Optimal control theory is used to determine the optimal dynamic BLUE strategy, conditional on a RED strategy, which is observed by BLUE military intelligence. The optimal arms support strategy for BLUE is to initially send a large volume of arms support to GREEN, to rapidly move the front to the optimal position. Then, the support should be almost constant during most of the war, keeping the war front location stationary. In the final part of the conflict, when RED will have almost no military resources left and tries to retire from the GREEN territory, BLUE should strongly increase the arms support and make sure that GREEN rapidly can regain the complete territory and end the war

This study focuses on the optimal deployment problem, and determines the optimal size of a military force to send to the battle field. The decision is optimized, based on an objective function, that considers the cost of deployment, the cost of the time it takes to win the battle, and the costs of killed and wounded soldiers with equipment. The cost of deployment is modeled as an explicit function of the number of deployed troops and the value of a victory with access to a free territory, is modeled as a function of the length of the time it takes to win the battle. The cost of lost troops and equipment, is a function of the size of the reduction of these lives and resources. An objective function, based on these values and costs, is optimized, under different parameter assumptions. The battle dynamics is modeled via the Lanchester differential equation system based on the principles of directed fire. First, the deterministic problem is solved analytically, via derivations and comparative statics analysis. General mathematical results are reported, including the directions of changes of the optimal deployment decisions, under the influence of alternative types of parameter changes. Then, the first order optimum condition from the analytical model, in combination with numerically specified parameter values, is used to determine optimal values of the levels of deployment in different situations. A concrete numerical case, based on documented facts from the Battle of Iwo Jima, during WW II, is analyzed, and the optimal US deployment decisions are determined under different assumptions. The known attrition coefficients of both armies, from USA and Japan, and the initial size of the Japanese force, are parameters. The analysis is also based on some parameters without empirical documentation, that are necessary to include to make optimization possible. These parameter values are motivated in the text. The optimal solutions are found via Newton- Raphson iteration. Finally, a stochastic version of the optimal deployment problem is defined. The attrition parameters are considered as stochastic, before the deployment decisions have been made. The attrition parameters of the two armies have the same expected values as in the deterministic analysis, are independent of each other, have correlation zero, and have relative standard deviations of 20%. All possible deployment decisions, with 5000 units intervals, from 0 to 150000 troops, are investigated, and the optimal decisions are selected. The analytical, and the two numerical, methods, all show that the optimal deployment level is a decreasing function of the marginal deployment cost, an increasing function of the marginal cost of the time to win the battle, an increasing function of the marginal cost of killed and wounded soldiers and lost equipment, an increasing function of the initial size of the opposing army, an increasing function of the efficiency of the soldiers in the opposing army and a decreasing function of the efficiency of the soldiers in the deployed army. With stochastic attrition parameters, the stochastic model also shows that the probability to win the battle is an increasing function of the size of the deployed army. When the optimal deployment level is selected, the probability of a victory is usually less than 100%, since it would be too expensive to guarantee a victory with 100% probability. Some of many results of relevance to the Battle of Iwo Jima, are the following: In the deterministic Case 0 analysis, the optimal US deployment level is 66200, the time to win the battle is 30 days and 14000 US soldiers are killed or wounded. If the marginal cost of the time it takes to win a victory doubles, the optimal deployment increases to 75400, the time to win a victory is reduced to 26 days, and less than 12000 soldiers are killed or wounded. In the stochastic Case 0 analysis, the optimal US deployment level is 65000, the expected time to win the battle is 46 days and almost 25000 US soldiers are expected to be killed or wounded. If the cost per killed or wounded soldier increases from 0 to 5 M $US, the optimal deployment level increases to 75000. Then, the victory is expected to appear after 35 days and 19900 US soldiers are expected to be killed or wounded.

In this study, the Bohler K 190 steel was used. The steel was manufactured by the powder metallurgy (PM) process. The boronizing process was carried out in the range of 1173 to 1323 K, for 1-10 h. The samples were boronized in solid medium, called the Durborid powder mixture. For the microstructural observations, the scanning electron microscopy was utilized for determining the morphology of interfaces and measuring the layers’ thicknesses. The phase composition of boride layers was also determined with X-ray diffraction analysis. To investigate the redistribution of chemical elements redistribution during the boronizing process, the EDS mapping and EDS point analysis were used. The boride layers were constituted by FeB and Fe2B phases except for 1173 K for 1 h. The values of Vickers microhardness of Fe2B, FeB and transition zone were estimated. Finally, to assess the boron activation energies in FeB and Fe2B, the so-called integral method was applied and the results in terms of activation energies were confronted with the literature data.

Asphalt pavement temperature has several applications, including pavement structural design and evaluation, asphalt mixture design, asphalt binder grade determination and material aging characterization. However, available asphalt pavement temperature prediction models were mostly developed for temperate climatic conditions, outside of the tropics. Before such models are adopted for use in a tropical climate, their applicability must be evaluated. This study evaluated five empirical asphalt pavement temperature prediction models developed by Lukanen et al. [1], Park et al. [2], Diefenderfer et al. [3], Taamneh [4] all in the United States and Asefzadeh et al. [5] in Canada to ascertain their prediction accuracy in tropical climate, using Ghana as a case study. In-situ asphalt pavement temperature data were measured at two sites for eight months: Kumasi and Tamale in the Forest and Savannah climatic zones, respectively. The measured pavement temperature data were statistically compared with predicted temperatures, and it was found that the Park et al. [2] model provided a more accurate pavement temperature prediction in both climatic zones. The other models either over-predicted or under-predicted asphalt pavement temperature with significant error margins. However, there is a need to improve the prediction accuracy of the Park et al. [2] model or a local model developed.

The COVID-19 crisis has resulted in a shortage of personal protective equipment (PPE) [1]. COVID-19 is currently the leading cause of death in the United States[2]. Health care providers caring for COVID-19 patients or at high risk of being exposed to the SARS-CoV-2 virus benefit from a face shield to protect against aerosol droplets that could hit the face and minimize the chance of inadvertently touching the face with contaminated hands, and air filtration to filter out aerosolized SARS-CoV-2. Adapting commercially available full-faced snorkel masks has been proposed as an alternative to narrow the gap in PPE [3]. Here we explore a full-faced snorkel mask with commercially available particulate filters.

How does the world around us work and what is real? This question has preoccupied humanity since its beginnings. From the 16th century onwards, it has been periodically necessary to revise the prevailing worldview. But things became very strange at the beginning of the 20th century with the advent of relativity theory and quantum physics. The current focus is on the role of information, there being a debate about whether this is ontological or epistemological. A theory has recently been formulated in which spacetime and gravity emerges from microscopic quantum information, more specifically from quantum entanglement via entanglement entropy. A latest theory describes the emergence of reality itself through first-person perspective experiences and algorithmic information theory. In quantum physics, perception and observation play a central role. Perception, interaction with the environment, requires an exchange of information. Via biochemical projection, information is given an interpretation that is necessary to make life and consciousness possible. The world around us is not at all what it seems.

The European Union Water Framework Directive (2000/60/EC; WFD) aims to achieve a good ecological and chemical status of all bodies of surface water by 2027. The development of an integrated guidance on surface water chemical monitoring (e.g. WFD Guidance Document No. 7/19) has been transferred into national German law (Ordinance for the Protection of Surface Waters, OGewV). For the majority of compounds, this act requires a monthly sampling frequency to assess the chemical water quality status of a surface water body. To evaluate the representativeness of the sampling strategy under the OGewV, high-frequency online monitoring data is investigated under different sampling scenarios and compared with current, monthly grab sampling strategy. About 23 million data points were analyzed for this study, three chemical parameters (dissolved oxygen, nitrate-nitrogen, chloride concentration) and discharge data were selected from four catchment of different sizes ranging from 51391 km² to 84 km² (Elbe, Vereinigte Mulde, Neiße and two stations at Lockwitzbach). In this paper we proposed short-term online-monitoring (STOM) as a sampling alternative. STOM considers the placement of online sensors over a limited duration and return interval. In general we: (I) compare the results of conventional grab sampling with STOM, (II) investigate the different performance of STOM and grab sampling using discharge data as proxy for analyzing event-mobilized pollutants and (III) investigate the related uncertainties and costs of both sampling methods. Results show, that STOM outperforms grab sampling for parameters where minimum/maximum concentrations are required by law as the probability to catch a single extreme value is higher with STOM. Furthermore, parameters showing a pronounced diurnal pattern, like dissolved oxygen, are also captured considerably better. The performance of STOM showed no substantial improvements for parameters with small concentration variability, as nitrogen-nitrate The analysis of discharge events as a proxy parameter for event-mobilized pollutants proved that the probability of capturing samples during events is significantly increased by STOM.

When discussing the concepts of risk, safety, and security, people have an intuitive understanding of what these concepts mean, and, to a certain level, this understanding is universal. However, when delving into the real meaning of these concepts, one is likely to fall into semantic debates and ontological discussions. In industrial parks, it is important that (risk) managers from dierent companies, belonging to one and the same park, have the same understanding of the concepts of risk, safety, and security. It is even important that all companies in all industrial parks share a common understanding regarding these issues. As such, this paper explores the similarities and dierences behind the perceptions of these concepts, to come to a fundamental understanding of risk, safety, and security, proposing a semantic and ontological ground for safety and security science, based on an etymological and etiological study of the concepts of risk and safety. The foundation has been induced by the semantics used in the ISO 31000 risk management guidance standard. Hence, this article proposes a coherent, standardized set of concepts and definitions with a focus on the notion “objectives” that can be used as an ontological foundation for safety and security science, linking “objectives” with the concepts of safety, security, risk, performance and also failure and success, theoretically allowing for an increasingly more precise understanding and measurement of (un)safety across the whole range of individuals, sectors and organizations, or even society as a whole.

In Ultra-wideband (UWB)-based wireless ranging or distance measurement, differentiation between line-of-sight~(LOS), non-line-of-sight~(NLOS), and multi-path (MP) conditions are important for precise indoor localization. This is because the accuracy of the reported measured distance in UWB ranging systems is directly affected by the measurement conditions (LOS, NLOS or MP). However, the major contributions in literature only address the binary classification between LOS and NLOS in UWB ranging systems. The MP condition is usually ignored. In fact, the MP condition also has a significant impact on the ranging errors of the UWB compared to the direct LOS measurement results. Though, the magnitudes of the error contained in MP conditions are generally lower than completely blocked NLOS scenarios. This paper addresses machine learning techniques for identification of the mentioned three classes (LOS, NLOS, and MP) in the UWB indoor localization system using an experimental data-set. The data-set was collected in different conditions at different scenarios in indoor environments. Using the collected real measurement data, we compare three machine learning (ML) classifiers, i.e., support vector machine (SVM), random forest (RF) based on an ensemble learning method, and multilayer perceptron (MLP) based on a deep artificial neural network, in terms of their performance. The results show that applying ML methods in UWB ranging systems are effective in identification of the above-mentioned three classes. In specific, the overall accuracy reaches up to 91.9% in the best-case scenario and 72.9% in the worst-case scenario. Regarding the F1-score, it is 0.92 in the best-case and 0.69 in the worst-case scenario. For reproducible results and further exploration, we (will) provide the publicly accessible experimental research data discussed in this paper at PUB - Publications at Bielefeld University. The evaluations of the three classifiers are conducted using the open-source python machine learning library scikit-learn.

The rising global incidence of acute and chronic kidney diseases has increased the demand for renal replacement therapy. This issue, compounded with the limited availability of viable kidneys for transplantation, has propelled the search for alternative strategies to address the growing health and economic burdens associated with these conditions. In the search for such alternatives, significant efforts have been devised to augment the current and primarily supportive management of renal injury with novel regenerative strategies. For example, gene- and cell-based approaches that utilize recombinant peptides/proteins, gene, cell, organoid, and RNAi technologies have shown promising outcomes primarily in experimental models. Supporting research has also been conducted to improve our understanding of the critical aspects that facilitate the development of efficient gene- and cell-based techniques that the complex structure of the kidney has traditionally limited. This manuscript is intended to communicate efforts that have driven the development of such therapies by identifying the vectors and delivery routes needed to drive exogenous transgene incorporation that may support the treatment of acute and chronic kidney diseases.

The Industrial Internet of things (IIoT) enabled smart system has entered into a golden era of rapid technology growth. IIoT is a concept to make every system interrelated such that they are able to collect and transfer data over a wireless network without human intervention. In this paper, we discuss the development of an IoT enabled system to monitor the vibration signature of equipment as part of prognosis and availability management system (P&AM) that serves to prevent unplanned operation downtime and catastrophic failure of a whole system. In order to simply the complexity of processing video content and performing inference, the Intel OpenVINO platform was selected because of it’s simplicity, portability across Intel AI processors, performance and comprehensiveness of it’s analytical and diagnostics capabilities that can be tested in Intel’s DevCloud. The IIoT system consists of a High Performance Computing (HPC) platform based on Intel’s Xeon processors and Movidius AI accelerator, Intel’s OpenVINO toolkit for AI, a Regul high performance programmable controller capturing vibration data through sensors and a low-latency network connection. Notifications of anomalies are sent to a smartphone. This paper reveals an approach for the features extraction and selection, known as feature engineering, of the equipment component we want to protect. Feature engineering is the first step for the P&AM of these components and extends to the whole system. The broader aim of this paper is to help technical leaders at the exploring or experimenting stages of their AI framework to learn the concepts of implementing algorithms using datasets that have real value to their companies. Datasets generated and referred to in this paper were generated by simulation under various material failure scenarios.

We propose two methods for obtaining estimations on the minimum distance and covering radius of orthogonal arrays. Both methods are based on knowledge about the (feasible) sets of distance distributions of orthogonal arrays with given length, cardinality, factors and strength. New bounds are presented either in analytic form and as products of an ongoing project for computation and investigation of the possible distance distributions of orthogonal arrays with parameters in doable ranges.

The power sectors in most African countries face an enduring problem of utility performance – electricity utilities have failed to deliver adequate, reliable and competitively priced electricity to support economic growth and improve the welfare of their populations. Despite more than two decades of power sector re-forms, outcomes have been varied and often disappointing. Using a case study de-sign, we explore the five key enduring power challenges. The research utilizes a more powerful analytical framework that combines power sector reform theory and principal-agent theoretical lens to explore the experience of power sector reforms in Kenya and provides a deeper understanding of drivers of utility performance and reform impacts. Empirical findings show that the structural, governance and regulatory reforms that previously created incentives for improved utility performance are increasingly threatened by political influence. Kenya Power’s financial viability has deteriorated in recent years and the regulator has been undermined. One of our major conclusions is that when the relationship between the principal (government) and agent (utility) is well understood and the agent is properly incentivized, performance improvements are possible. However, when the government undermines or muddies those incentives through conflicting political interventions, performance improvements can be reversed.

This paper discusses two major applications of SU(3) theory, the first being the question of quantum brachistochrones and problems in time optimal control theory, the second being the use of spherical tensor decompositions of the special functions which are associated to SU(3) via the isotropic oscillator. We discuss the derivation of the quantum brachistochrone problem more generally from the perspective of von Neumann equations and matrix mechanics, arriving at an equivalent formulation to the Lagrangian method. Discussion is given to the application of such advanced methods in quantum computation, and some future directions that may be amenable to a similar sort of an

The use of pain relief during castration and dehorning of calves on commercial beef operations can be limited by constraints associated with the delivery of analgesic agents. As topical anaesthetic (TA) and buccal meloxicam (MEL) are now available in Australia, offering practical analgesic treatments for concurrent castration and dehorning of beef calves, a study was conducted to determine their efficacy in providing pain relief when applied alone or in combination. Weaner calves were randomly allocated to; (1) no castration and dehorning / positive control (CONP); (2) castration and dehorning / negative control (CONN); (3) castration and dehorning with buccal meloxicam (BM); (4) castration and dehorning with topical anaesthetic (TA); and (5) castration and dehorning with buccal meloxicam and topical anaesthetic (BMTA). Weight gain, paddock utilisation, lying activity and behaviour following treatment were measured. CONP and BMTA calves had significantly greater weight gain than CONN calves (P < 0.001). CONN calves spent less time lying compared to BMTA calves on all days (P < 0.001). All dehorned and castrated calves spent more time walking (P = 0.024) and less time eating (P < 0.001) compared to CONP calves. There was a trend for CONP calves to spend the most time standing and CONN calves to spend the least time standing (P = 0.059). There were also trends for the frequency of head turns to be lowest in CONP and BMTA calves (P = 0.098) and tail flicks to be highest in CONN and BM calves (P = 0.061). The findings of this study suggest that TA and MEL can improve welfare and production of calves following surgical castration and amputation dehorning.

With the advancement of long-read sequencing technologies and their more widespread use for bacterial genomics, several methods for generating genome assemblies from error-prone long reads have been developed. These are complemented by various tools for assembly polishing using either long reads, short reads, or reference genomes. End users are therefore left with a plethora of possible combinations of programs for obtaining a final trusted assembly. Hence, there is also the need for measuring completeness and accuracy of such assemblies, for which, again, several evaluation methods implemented in various programs are available. In order to automatically run all these programs, I developed two workflows for the workflow management system Snakemake for bacterial genome assembly and evaluation of assemblies, which provide end users with an easy-to-run method for both tasks. The workflows are available as open source software under the MIT license at https://github.com/pmenzel/ont-assembly-snake and https://github.com/pmenzel/score-assemblies.

A time integration scheme based on semi-Lagrangian advection and Laplace transform adjustment has been implemented in a baroclinic primitive equation model. The semi-Lagrangian scheme makes it possible to use large time steps. However, errors arising from the semi-implicit scheme increase with the time step size. In contrast, the errors using the Laplace transform adjustment remain relatively small for typical time steps used with semi-Lagrangian advection. Numerical experiments confirm the superior performance of the Laplace transform scheme relative to the semi-implicit reference model. The algorithmic complexity of the scheme is comparable to the reference model, making it computationally competitive, and indicating its potential for integrating weather and climate prediction models.

Post-Shoah Christology is embedded in the unique relationship of Jews and Christians, especially Jesus’ Jewishness and the Jewish roots of Christianity, as well as Christian moral failures towards Jews before and during the Shoah. Essential for contemporary Christianity, a vibrant post-Shoah Christology confronts three main challenges, each demanding a different response. The first challenge is the reality that soon there will be no more first-generation witnesses to the Final Solution. Such is an inevitable challenge that has to be faced and prepared for. Religious pluralism is the second challenge, and includes a number of related threads, yet should ultimately be embraced. The third challenge is the (inevitable?) loss of memory, passion, and urgency, a willful forgetfulness by Christians towards the importance of the Jewish-Christian relationship, and especially, Christian failure in the Shoah. This challenge demands robust refutation and ongoing struggle. Before addressing these challenges, I will first further define and highlight the need for a post-Shoah Christology and will conclude this article with three general and three concrete hopes for a viable post-Shoah Christology.

A review on several classical, algebraic models in nuclear structure physics, which use symmetries as an important tool, are presented. After a conceptual introduction to group theory, a selection of models is chosen to illustrate the methods and the power of the usage of symmetries. It enables to describe very involved systems in a greatly simplified manner. Some problems are also discussed, when ignoring basic principles of nature, as the Pauli Exclusion principle. We also show that, nevertheless, occasionally one can rescue these omissions. In a couple of representative models, applications of symmetries are explicitly applied, in order to illustrate how extremely complicate systems can be treated. This contribution is meant bas a review on the use of algebraic models in nuclear physics, leading to a better understanding of the articles in the same special volume.

Risk protection and precaution are noticeable present, especially in times of a pandemic like Covid 19. However, it is not only in times of abruptly upcoming and unexpected situations like Corona that companies and economic entities are exposed to opportunities and threats. Internal and external developments that could influence the organization’s aims are defined as risks. Hence, it is important to emphasize that every operational activity is associated with risks and is consequently a challenge for companies. The purpose of this paper is to contribute to the identification and classification of individual risks. In this regard, the objectives and relevance of risk management are highlighted. Through the accomplishment of a classic literature review and the application of a comparative methodology the procedure of how hedging instruments are applied, is elaborated. The analysis indicates that various business concerns have a high awareness of risks inherent in business transactions, although they are still very hesitant to insert hedging instruments. Their uncertainties consist in defining and classifying the relevant risks plus identifying the appropriate hedging methods for them. Thus, this research can add new dimensions to hedging transactions and, particularly, express the benefits and opportunities of hedge accounting.

Using publicly available data for 28 EU/EES countries from Eurostat and Our World in Data, we investigate how the current rate of Covid vaccination in a country compares to its average rate of excess mortality (EM) in the pandemic to date. We find that, in the linear regression, the correlation between average EM and vaccination rate is strongly negative, a priori evidence to support the claim that the Covid vaccines have saved many lives. However, a closer analysis of the timeline suggests otherwise. The correlation was already strongly negative before the vaccines were rolled out and is only weakly negative thereafter. In theory, survivor bias could still explain this shift, especially since waves of EM closely align with Covid waves. However, we find in addition that about half of our 28 countries experienced higher EM in 2022 than in 2021, and all that did so have higher than average vaccination rates. This is something which survivor bias cannot explain and raises the real possibility that the vaccines have not just failed to save many lives, but may have already caused net harm. Moreover, any such harm may be ongoing since we find that EM and vaccination rates have been consistently positively correlated since April 2022. We show that all these findings are robust to several different ways of measuring EM and/or vaccination rates. Finally, using public data from Worldometers, we show that the correlation over time of official Covid mortality rates with current vaccination rates closely tracks that of EM rates, even as Covid mortality has waxed and waned and even in the post-omicron period.

The dominant view of cleaning compulsion as a dimension of OCD is that it is motivated by contamination anxiety. However, in daily life, much cleaning is undertaken as part of tidying one’s home. Such cleaning as well as the other tidying chores may equally assume obsessive-compulsive proportions. However, empirical interest in this phenomenon has remained sparse so far. This article aims to increase awareness of this ill-acknowledged symptom cluster among OCD researchers and to invite them to investigate it. After the introduction, clinical evidence for this OCD dimension is dealt with. Next, empirical studies with OCD inventories, which contain items referring to compulsive tidying, are discussed. Two of these made use of an OCD-inventory, devised by the present author. These also provide the data for the main investigation to be discussed in this paper. In that latter study, six OCD-item clusters, among which tidying compulsion, are predicted. These predictions are tested by evaluating and comparing the item-cluster correlations of all six clusters. These also offer a basis to optimize the clusters toward more homogeneous and distinct ones. By comparing predicted with final clusters, the items can be qualified as either hits, false positives, or false negatives. This output provides the details for revising the predictions, but also allows for calculating the values of two global “goodness-of-fit” measures for each predicted cluster. Though the results do not completely endorse the predicted composition of part of the clusters in the second sample, tidying compulsion is doing rather well. To determine the incidence of tidying compulsion based on the cluster scores, decisions had to be made about what constitute a cluster score, how its gravity can be estimated, and what should be the cut-off per cluster to divide the sample into clinical and subclinical cases on each cluster. If these ‒ unavoidably arbitrary ‒ decisions are accepted, both samples show an incidence of tidying compulsion of around 25%. After a brief critical evaluation of all discussed studies, it is concluded that the evidence presented, though modest, is solid enough to warrant further research into tidying compulsion.

This paper attempts to describe the large-scale (solar system-like, astronomical-scale) systems of the known world using the physical models and mathematical tools of relativistic quantum mechanics. The value of H_x can be introduced and approximated as an analogue of the constant ℏ. Based on the quantum mechanical approach, the proper time scale of the solar system can be determined.

Increasing evidence points to host Th17 inflammatory responses as contributing to the severe lung pathology and mortality of lower respiratory tract infections from coronaviruses. This includes host inflammatory and cytokine responses to COVID-19 caused by the SARS-2 coronavirus (SARS CoV2). From studies conducted in laboratory animals, there are additional concerns about immune enhancement and the role of potential host immunopathology resulting from experimental human COVID-19 vaccines. Here we summarize evidence suggesting there may be partial overlap between the underlying immunopathologic processes linked to both coronavirus infection and vaccination, and a role for Th17 in immune enhancement and eosinophilic pulmonary immunopathology. Such findings help explain the link between viral-vectored coronavirus vaccines and immune enhancement and its reduction through alum adjuvants. Additional research may also clarify links between COVID-19 pulmonary immunopathology and heart disease.

Insufficient mixing in large-scale bioreactors, provokes gradient zones of substrate, dissolved oxygen, pH and other parameters. E. coli responds to a high glucose, low oxygen feeding zone with the accumulation of mixed acid fermentation products, especially formate, but also with the synthesis of non-canonical amino acids, such as norvaline, norleucine and -methyl-norleucine. These amino acids can be mis-incorporated into recombinant products, which causes a problem for pharmaceutical production whose solution is not trivial. While these effects can also be observed in scale down bioreactor systems, these are challenging to operate. Especially the high-throughput screening of clone libraries is not easy, as fed-batch cultivations would need to be controlled via repeated glucose pulses with simultaneous oxygen limitation, as has been demonstrated in well controlled robotic systems. Here we show that not only glucose pulses in combination with oxygen limitation can provoke the synthesis of these non-canonical branched-chain amino acids, but also that pyruvate pulses produce the same effect. Therefore we combined the enzyme based glucose delivery method Enbase® in a PALL24 mini-bioreactor system and combined repeated pyruvate pulses with simultaneous reduction of the aeration rate. These cultivation conditions, produced an increase in the non-canonical branched chain amino acids norvaline and norleucine in both the intracellular soluble protein and inclusion body fractions with mini-proinsulin as an example product, and this effect was verified in a 15 L stirred tank bioreactor. To our opinion this cultivation strategy is easy to apply for the screening of strain libraries under standard laboratory conditions if no complex robotic and well controlled parallel cultivation devices are available.

The paper argues that universal approaches to infiltration and drainage in permeable media that pivot around capillarity and that led to dual porosity, non-equilibrium, or preferential flow need to be replaced by a dual process approach. One process has to account for relatively fast infiltration and drainage based on Newton's shear flow, while the other one is responsible for storage and relatively slow redistribution of soil water by focusing on capillarity. Already Schumacher (1864) postulated two separate processes. However, Buckingham's (1907) and Richards' (1931) apparent universal capillary-based approach to flow and storage of water in soils dominated. The paper introduces the basics of Newton's shear flow in permeable media. It presents experimental support for the four presumptions of (i) sharp wetting shock fronts; (ii) that move with constant velocities; (iii) atmospheric pressure prevails behind the wetting shock front; (iv) laminar flow. It further discusses the scale tolerance of the approach, its relationship to Darcy's (1856) law, and its extension to solute transport.

Hypertensive disorders of pregnancy (HDP), including preeclampsia (PE) and gestational hypertension (GH), are major causes of maternal and fetal morbidity and mortality. This review elucidates the role of regulatory T cells (Tregs) in the immunological aspects of HDP and explores their therapeutic potential. Tregs, known for maintaining immune tolerance, are crucial in pregnancy to prevent immune-mediated rejection of the fetus. In HDP, Treg numbers and function imbalance are observed, correlating with disease severity. The review highlights that Tregs contribute to immunological adaptation in normal pregnancy, ensuring fetal acceptance and placental development. In contrast, HDP is associated with Treg dysfunction, marked by decreased numbers and impaired regulatory capacity, leading to inadequate immune tolerance and abnormal placental development. This dysfunction is particularly evident in PE, where Tregs fail to adequately modulate the maternal immune response against fetal antigens, contributing to the pathophysiology of the disorder. Therapeutic interventions aiming to modulate Treg activity represent a promising avenue for HDP management. Studies in animal models and limited clinical trials suggest that enhancing Treg functionality could mitigate HDP symptoms and improve pregnancy outcomes. However, the review acknowledges the complexity of translating these findings into effective clinical therapies, given the multifactorial nature of HDP and the intricate regulatory mechanisms of Tregs. In conclusion, while the precise role of Tregs in HDP is still being unravelled, their central role in immune regulation during pregnancy is indisputable. Further research is needed to fully understand the mechanisms by which Tregs contribute to HDP and to develop targeted therapies that can safely and effectively harness their regulatory potential for treating hypertensive diseases of pregnancy.

This paper builds upon my earlier studies, in interpreting interculturally how the Kashmiri nondual Śaiva thinkers, Upaladeva (c. 900-950 CE) and Abhinavagupta (c. 950-1020 CE), in their Pratyabhijñā philosophical theology respond to and reinterpret the Buddhist semantic theory of reference as the exclusion of the inapplicable (anyāpoha). It engages the issues in the Pratyabhijñā debate with the Buddhists, with the interrelations of Claude Shannon and Warren Weaver’s theory of Information, de Saussurean structuralist semiotics and Peircean pragmatic semiotics.

The removal of non-climatic biases, so-called inhomogeneities, from long climatic records needs sophistically developed statistical methods. One principle is that usually the differences between a candidate series and its neighbour series are analysed instead of directly the candidate series, in order to neutralize the possible impacts of regionally common natural climate variation on the detection of inhomogeneities. In most homogenization methods, two main kinds of time series comparisons are applied, i.e. composite reference series or pairwise comparisons. In composite reference series the inhomogeneities of neighbour series are attenuated by averaging the individual series, and the accuracy of homogenization can be improved by the iterative improvement of composite reference series. By contrast, pairwise comparisons have the advantage that coincidental inhomogeneities affecting several station series in a similar way can be identified with higher certainty than with composite reference series. In addition, homogenization with pairwise comparisons tends to facilitate the most accurate regional trend estimations. A new time series comparison method is presented here, which combines the use of pairwise comparisons and composite reference series in a way that their advantages are unified. This time series comparison method is embedded into the ACMANT homogenization method, and tested in large, commonly available monthly temperature test datasets.

A system of simultaneous multi-variable nonlinear equations can be solved by the Newton’s method with local q-quadratic convergence if the Jacobian is analytically available. If this is not the case, then quasi-Newton methods with local q-superlinear convergence give solutions by approximating the Jacobian in some way. Unfortunately, the quasi-Newton condition (secant equation) doesn’t completely specify the Jacobian approximate in multi-dimensional case, so its full-rank update is not possible with classic variants of methods. The suggested new iteration strategy (“T-Secant”) allows full-rank update of the Jacobian approximate in each iteration by determining two independent approximates for the solution. They are used to generate a set of new independent trial approximates, then the Jacobian approximate can fully be updated. It is shown, that the T-Secant approximate is in the vicinity of the classic quasi-Newton approximate, providing that the solution is evenly surrounded by the new trial approximates. The suggested procedure increases the super-linear convergence of the secant method (φS = 1.618...) to super-quadratic (φT = φS + 1 = 2.618...) and the quadratic convergence of the Newton-method (φN = 2) to cubic (φT = φN + 1 = 3) in one dimensional case. The Broyden-type efficiency (mean convergence rate) of the suggested method in multi-dimensional case is an order higher than the efficiency of other classic low-rank update quasi-Newton methods as shown by numerical examples on a Rosenbrock-type test-function with up to 1000 variables. The geometrical representation (hyperbolic approximation) in single variable case helps explaining the basic operations and a vector-space description is also given in multi-variable case.

Background: Anaemia in pregnancy have been a cause of serious concern and burden as it contributes significantly to high maternal mortality worldwide. This study aims to explore how big the burden of anaemia in pregnant women is, how it can be reduced during antenatal clinic in order to minimize risks and complications of anaemia among pregnant women. Method: An analytical cross-sectional study design used, involved 560 pregnant women attending antenatal clinic at three regional referral hospitals in Dar es Salaam region, Tanzania, from January to June 2022. Those willing to participate and met inclusion criteria were included in the study. Data was collected by interview through a structured questionnaire. Analysis of data was done using SPSS v25.0, (p<0.001) considered statistical significant. Results: A total of 560 pregnant women were interviewed. The prevalence of anaemia in pregnancy is high about 70.9% whereby 61.2% participants had mild anaemia, 33.2% participants had moderate anaemia and 25.6% participants had severe anaemia. Significant associations were found between age, education level, marital status, Less ANC attendance (<3 visit), lack of health insurance and lack of employment among pregnant women. Conclusion: Prevalence of anaemia in pregnancy women is still high and its predictors highly affect its control. Hence the ministry of health in collaboration with other stakeholders should develop policies, educating community on the importance of antenatal visit for early detection and treatment of anaemia and impacting knowledge to medical personnel in management of anaemia in pregnancy and associated complications in order to decrease maternal mortality rate.

Introduction: This empirical study investigates the impact of two distinct mathematical problem-solving methods – the Algebraic Formula Method and the Newton Sum Method – on enhancing ChatGPT's competence in effectively solving quadratic root functions. The integration of Artificial Intelligence (AI) into mathematical problem-solving has paved the way for innovative approaches. In this study, we delve into the Algebraic Formula Method and the Newton Sum Method, essential techniques for solving quadratic root functions. We aim to showcase the profound influence of these methods on ChatGPT's capacity to excel in solving quadratic equations. Evidence Through concrete evidence, we demonstrate ChatGPT's adept utilization of the Newton Sum Method for quadratic root function calculations. While ChatGPT can compute quadratic root functions of the form α^15 + β^15 using this method, its proficiency in using algebraic formula methods typically extends only up to α^4 + β^4. This marked discrepancy underscores the pivotal role that different methods play in amplifying the AI system's mathematical capabilities Result The results of this study provide concrete evidence of ChatGPT's superior utilization of the Newton Sum Method for calculating quadratic root functions. The model adeptly computes expressions of the form α^15 + β^15 using this method, while its proficiency using algebraic formula methods is generally limited to α^4 + β^4. This striking discrepancy underscores the transformative impact that different methods can have on elevating the AI system's mathematical prowess. Conclusion :Pushing Boundaries: Pioneering Novel Maths Approaches for Overcoming Limitations in AIThis study serves as an illuminating testament to the significance of pioneering innovative methodologies, rules, theorems, or formulas to surmount the current limitations in AI systems like ChatGPT. These innovative pursuits hold the key to unlocking the untapped potential that lies within, propelling AI systems to greater heights of proficiency. In essence, they offer a strategic pathway towards expanding the capabilities of AI and pushing the boundaries of what can be achieved. Discussion The outcomes derived from this study underscore the significant influence wielded by the method selection in augmenting the mathematical competencies of ChatGPT. Particularly noteworthy is the application of the Newton Sum Method, which surfaces as a compelling exemplar. This method serves as a pivotal conduit through which the model surpasses its prior constraints, allowing it to venture into the realm of calculations entailing higher exponents. Implications and Future Research: These findings not only contribute to AI's mathematical competencies but also emphasize the need for pioneering new methods, rules, theorems, or formulas to further enhance AI systems like ChatGPT. Future research could explore the development of novel mathematical techniques tailored to AI systems, thus expanding their capabilities across diverse problem-solving domains.

Successful fertilization treatments targeted to improve stand productivity while reducing operational complexities and cost depend on a clear understanding of soil nutrient availability under varying environmental conditions. Soil nutrient data collected from 154 forest sites throughout the Inland Northwest, USA were analyzed to examine soil nutrient characteristics on different geologic soil parent materials and to rank soil fertility. Results show that soil parent material explains significant differences in soil nutrient availability. Soils developed from volcanic rocks have the highest CEC and are relatively high in P, K, S, Mg, Cu, Ca, and B, but generally poor in N. Forest soils developed from plutonic rocks exhibit the lowest CEC and are low in N, S, K, Mg, Cu, and Ca, but higher in P. Some soils located on mixed glacial till are low only in K, Cu, Mg, and Ca, but many glacial soils are relatively rich in other nutrients, albeit the second lowest CEC. Soils developed from metasedimentary and sedimentary rocks are among those with lowest soil nutrient availability for P and B. Sulfur was found to have the highest concentrations in metasedimentary influenced soils and the least in sedimentary derived soils. Our results should be useful in designing site-specific fertilizer and nutrient management prescriptions for forest stands growing on soils developed from these major geologies within the Inland Northwest region of the United States.

The coevolution of species drives diversity in animals and plants and contributes to natural selection, whereas in host–parasite coevolution, a parasite may complete an incomplete evolutionary/developmental function by utilizing the host cell’s machinery. Analysis of related older data suggests that Plasmodium falciparum (P. falciparum), the pathogen of malaria tropica, cannot survive outside its human host because it is unable to perform the evolutionarily first protein glycosylation of serologically A-like, O-GalNAcα1-Ser/Thr-R, Tn antigen (“T nouvelle”) formation, owing to its inability for synthesizing the amino sugar N-acetyl-d-galactosamine (GalNAc). This parasite breaks the species barrier via hijacking the host's physiological A-like/Tn formation through abundantly expressing serine residues and creating hybrid A-like/Tn structures, which in the human blood group O(H) are attacked by the germline-encoded nonimmune polyreactive immunoglobulin M (IgM), exerting the highly anti-A/B/H-aggressive isoagglutinin activities. These activities physiologically undergo the ABO(H) blood group phenotype formation, occurring on the surfaces of red blood cells (RBC), epithelial and endothelial cells and on plasma proteins by identical glycosylation, performed by the ABO(H)-allelic glycotransferases, phenotypically downregulating the anti-A/B/H-reactive IgM (isoagglutinin) activities in the non-O blood groups. ABO(H) phenotype diversity, this way glycosidically linked and molecularly connected to humoral immunity, becomes exposed to the evolution.

Providing safely-managed sanitation/hygiene requires key competencies for education, training, service delivery, enterprise development and management, product and infrastructure design and development, construction and installation, governance, financing, research, etc. These strategic sanitation capacities will have to be built from higher education’s academic and professional programmes structured and designed to produce skilled and knowledgeable professionals and practitioners. This study aims to investigate the quality of the sanitation/hygiene management content of Environmental Health programmes; the adequacy of the existing central curricula; and the perception of environmental health sanitation/hygiene-trained professionals to determine the next phase for building knowledge and capacity of sanitation professionals in Nigeria through higher education institutions. A multilevel mixed method concurrent study was used for sampling and data collection with a multilevel perception analysis to examine the perceptions of students, lecturers and graduate alumni as well as employers/supervisors and clients/service-users of sanitation/hygiene related graduates. The main findings of this paper show limited understanding of the concepts of contemporary issues of sanitation/hygiene management; the central/national teaching and curricula were found to be seriously out of date; and clients/service-users were dissatisfied with the skills and knowledge levels of the graduates. The study concludes by recommending a national sanitation management higher education pathway to guide the provision of integrated sanitation/hygiene management education at higher education institutions (HEIs), to build effective, efficient, competent, and sufficient workforce for the country.

Purpose of review The forest industry has deployed ICTs to improve productivity of forest supply chains. In this sense, digitalization of data flows significantly impacts wood supply chains, from forest to mills, which must react flexibly to market fluctuations of forest products. The goal of this study was to conduct a literature review on data flow implementations in management systems of wood supply chains and to evaluate their applicability in supply chains to analyze the opportunities for improving them in practice. Recent findings We utilized the ScienceDirect database, Scopus and Web of Science in order to document data flows in systems and actual applications. Due to ongoing outsourcing, the wood procurement chains, and the wood supply chains were identified in the forest industry. Several different technologies can be implemented also in wood supply chains to digitalize the data flow depending on the specific needs of organizations. In this regard, digitalization of Big Data causes significant changes in elements of supply models that should be integrated and standardized in the optimization and simulation systems. Summary A modelling guide is suggested for accurate dynamic solution of problems of forest logistics. Then, the opportunities in digitalization for connecting different data flows, technologies, and stakeholders are discussed thoroughly. We conclude that data-driven dynamic optimization, and locally implemented digitalization contributes to wood supply modeling in the establishment of standards for cloud-based platforms at time-related and sequential measures which will ensure successful forest logistics through the planning and the monitoring of wood supply chains.

Conventional heat treatment is not capable of converting a sufficient amount of retained austenite into martensite in high-carbon or high-carbon and high-alloyed iron alloys. Cryogenic treatment induces the following alterations in the microstructures: (i) a considerable reduction in the retained austenite amount, (ii) formation of refined martensite coupled with an increased number of lattice defects, such as dislocations and twins, (iii) changes in the precipitation kinetics of nano-sized transient carbides during tempering, and (iv) an increase in the number of small globular carbides. These microstructural alterations are reflected in mechanical property improvements and better dimensional stability. A common consequence of cryogenic treatment is a significant increase in the wear resistance of steels. The current review deals with all the mentioned microstructural changes as well as the variations in strength, toughness, wear performance, and corrosion resistance for a variety of iron alloys, such as carburising steels, hot work tool steels, bearing and eutectoid steels, and high-carbon and high alloyed ledeburitic cold work tool steels.

The life cycles and biodiversity of Pacific coast gastropods were analyzed by videomicroscopy and DNA barcoding of indi-viduals collected from tide pools and in plankton nets from a variety of shore stations. In many species (Families Calyptrae-idae, Cerithiopsidae, Strombidae, Vermetidae, Columbellidae, Nassariidae, Olivellidae, Hermaeidae, Onchidorididae, Gas-tropteridae, Haminoeidae), the free-swimming veligers were recovered from plankton collections; in Roperia poulsoni (family Muricidae) veligers were usually recovered from egg sacs where they had been retained although some escapees were found in plankton collections; in Pteropurpura festiva (family Muricidae) free-living veligers were also found; and in Atlanta californiensis (family Atlantidae) both veligers and adults were obtained from plankton collections making this a holoplank-tonic species. The results confirm that DNA barcoding using the COI barcode is a useful strategy to match life-cycle stages within species as well as to identify species and to document the level of biodiversity within the gastropods.

Determining the DNA sequencing of a small element in the mitochondrial DNA (DNA barcoding) makes it possible to easily identify individuals of different larval stages of marine crustaceans without the need for laboratory rearing. It can also be used to construct taxonomic trees, although it is not yet clear to what extent this barcode-based taxonomy reflects more traditional morphological or molecular taxonomy. Collections of zooplankton were made using conventional plankton nets in Newport Bay and the Pacific Ocean near Newport Beach, California (Lat. 33.628342, Long. -117.927933) between May 2013 and January 2020, and individual crustacean specimens were documented by videomicroscopy. Adult crustaceans were collected from solid substrates in the same areas. Specimens were preserved in ethanol and sent to the Canadian Centre for DNA Barcoding at the University of Guelph, Ontario, Canada for sequencing of the COI DNA barcode. From 1042 specimens, 544 COI sequences were obtained falling into 199 Barcode Identification Numbers (BINs), of which 76 correspond to recognized species. The results show the utility of DNA barcoding for matching life-cycle stages as well as for documenting the diversity of this group of organisms.

Orthogonal operators can successfully be used to calculate eigenvalues and eigenvector compositions in complex spectra. Orthogonality ensures least correlation between the operators and thereby more stability in the fit, even for small interactions. The resulting eigenvectors are used to transform the pure transition matrix into realistic intermediate coupling transition probabilities. Calculated transition probabilities for close lying levels illustrate the power of the complete orthogonal operator approach.

Population genetic data underpin many studies of behavioral, ecological, and evolutionary processes in wild populations and contribute to effective conservation management. However, collecting genetic samples can be challenging when working with endangered, invasive, or cryptic species. Environmental DNA (eDNA) offers a way to sample genetic material non-invasively without requiring visual observation. While eDNA has been trialed extensively as a biodiversity and biosecurity monitoring tool with a strong taxonomic focus, it has yet to be fully explored as a means for obtaining population genetic information. Here, we review current research that employs eDNA approaches for the study of populations. We outline challenges facing eDNA-based population genetic methodologies, and suggest avenues of research for future developments. We advocate that with further optimizations, this emergent field holds great potential as part of the population genetics toolkit.

The aim of the article is to verify differences in the perception of selected factors of sustainability among small and medium-sized enterprises (SMEs) in Central Europe. The subjects of analysis are factors such as corporate social responsibility (CSR), business risk sources (market, financial, personnel, and operational), reputation and social media, national support, social changes, and crisis events in business. The questionnaire was completed by 1,090 SMEs from the business environments of Visegrad Group countries. Statistical hypotheses were verified using Z-scores for two population properties. The most negatively perceived factors among owners and managers in the SME segment are national support and legislative changes. The most positively perceived factor is reputation and social media. The country of doing business is a significant factor. The perception of crisis events in business is most negative among Czech SMEs. More than 80% of Hungarian SMEs perceive their companies as sustainable. In comparison with Slovak and Polish SMEs, Hungarian perceptions are more positive in the context of sustainability. The country of doing business is the strongest factor in evaluating CSR indicators. The positive perception of CSR in Czech SMEs (43.9%) is lower than in other countries.

It is estimated that pancreatic cancer will be the 2^nd leading cause of cancer-related deaths globally by 2030, highlighting the ongoing lack of effective treatment options in this devastating condition. There is a lack of reliable prognostic or predictive markers in pancreatic cancer to guide management decisions, whether for systemic chemotherapy, molecularly targeted therapies, or immunotherapies. To date, the results for targeted agents and immunotherapies in unselected populations of chemo-refractory pancreatic cancer have not met expectations. The reasons for this lack of efficacy of immunotherapy in pancreatic cancer are incompletely understood. The challenges in pancreatic cancer include the physical barrier created by the dense desmoplastic stroma surrounding the tumor, chemokine-mediated exclusion of T cells, poor antigenicity, paucity of infiltrating T cells within the tumor, ultimately leading to an immunosuppressive microenvironment. A better understanding of the role of inflammation in pancreatic cancer, its tumor microenvironment and individualized patient-related features, be they molecular, clinical or histopathological would enable a more effective tailored approach to the management of pancreatic cancer. In this review, the role of inflammation, the immune tumor microenvironment and potential immune biomarkers in pancreatic cancer are explored.

The structure of synthetic mRNAs as used in vaccination against cancer and infectious diseases contain specifically designed caps followed by sequences of the 5’ untranslated repeats of β-globin gene. The strategy for successful design of synthetic mRNAs by chemically modifying their caps aims to increase resistance to the enzymatic deccapping complex, offer a higher affinity for binding to the eukaryotic translation initiation factor 4E (elF4E) protein and enforce increased translation of their encoded proteins. However, the cellular homeostasis is finely balanced and obeys to specific laws of thermodynamics conferring balance between complexity and growth rate in evolution. An overwhelming and forced translation even under alarming conditions of the cell during a concurrent viral infection, or when molecular pathways are trying to circumvent precursor events that lead to autoimmunity and cancer, may cause the recipient cells to ignore their differential sensitivities which are essential for keeping normal conditions. The elF4E which is a powerful RNA regulon and a potent oncogene governing cell cycle progression and proliferation at a post-transcriptional level, may then be a great contributor to disease development. The mechanistic target of rapamycin (mTOR) axis manly inhibits the elF4E to proceed with mRNA translation but disturbance in fine balances between mTOR and elF4E action may provide a premature step towards oncogenesis, ignite pre-causal mechanisms of immune deregulation and cause maturation (aging) defects.

Literature pertaining to youth development has identified the importance of understanding the physical, intellectual and emotional needs of adolescent youth. The purpose of this study was to compare the use of a ‘traditional’ and ‘progressive’ coaching style to train a general male youth population to improve sprint and jump performances, whilst assessing enjoyment to comment on long term application. Maximal sprint times, sprint kinematics, unilateral jump distances and repetitive tuck jump scores were measured alongside anthropometric variables to characterise performance. Results revealed significant (p>0.05) pre/post differences in anthropometric variables across all maturation groups, and each of the maturational levels displayed a tendency to favour a particular coaching or control condition. Pre-PHV groups responded most effectively to the progressive style of coaching, displaying improvements in horizontal jump performances, and -0.7 to -2.7% improvements in all sprint times, despite also showing the largest increase in tuck jump scores (25.8%). The circa-PHV group produced their greatest improvements in the traditional intervention, as displayed through significant improvements (p<0.05) in 20m sprint times and dominant-leg horizontal jump performance, whilst also revealing the greatest deterioration in tuck jump scores (14.2%). Post-PHV displayed the greatest improvements in the control setting, suggesting the natural benefits gained through adolescent development were greater than the influence of the training interventions. In conclusion, it is suggested that matching coaching strategies and delivery techniques to the period of biological maturation may have implications for both performance and athlete safety.

"Metaverse" as a term came to the fore in 2021 when Facebook rebranded its corporate identity to Meta, and signaled its intention to invest at least $10 billion in developing the concepts and related products that year. However, there is still little consensus in defining what constitutes the metaverse, although there is a widespread, though not universal, agreement that it will bring a wide range of benefits across society. More specifically, the advent, and continuing evolution, of the metaverse has strategic and operational implications for, and impacts on, industry and business at large. Adopting an inductive, interpretivist approach, this exploratory research article presents case examples of the guidance on the responsible development of the metaverse provided by two IT business services companies. The article identifies the major risks and responsibilities associated with the metaverse and assesses how companies might address these responsibilities. Very little research has been published in this area and this article attempts to make a small contribution to filling this gap in the literature. The article finds that responsibilities are largely in line with those currently associated with corporate digital responsibility, and concludes that the strategic impact and extent of regulatory change will depend on the nature of the metaverse that materialises in the forthcoming decade.

Purpose: Perceptual learning and production practice are basic mechanisms that children depend on to acquire adult levels of speech accuracy. In this study, we examined perceptual learning and production practice as they contributed to changes in speech accuracy in three- and four-year-old children. Our primary focus was manipulating the order of perceptual learning and baseline production practice to better understand when and how these learning mechanisms interact. Method: Sixty-five typically-developing children between the ages of three and four were included in the study. Children were asked to produce CVCCVC nonwords like /bozjəm/ and /tʌvtʃəp/ that were described as the names of make-believe animals. All children completed two separate experimental blocks: a baseline block in which participants heard each nonword once and repeated it, and a test block in which the perceptual input frequency of each nonword varied between 1 and 10. Half of the participants completed a baseline-test order; half completed a test-baseline order. Results: Greater accuracy was observed for nonwords produced in the second experimental block, reflecting a production practice effect. Perceptual learning resulted in greater accuracy during the test for nonwords that participants heard 3 or more times. However, perceptual learning did not carry over to baseline productions in the test-baseline design, suggesting that it reflects a kind of temporary priming. Finally, a post hoc analysis suggested that the size of the production practice effect depended on the age of acquisition of the consonants that comprised the nonwords. Conclusions: The study provides new details about how perceptual learning and production practice interact with each other and with phonological aspects of the nonwords, resulting in complex effects on speech accuracy and learning of form-referent pairs. These findings may ultimately help speech-language pathologists maximize their clients’ improvement in therapy.

This paper deals with the analysis of trends in road accidents on major highways in Brazil. Using updated time series techniques, our results indicate that a low degree of long memory was detected in the series with shocks having transitory effects over time. We further find that the number of accidents taking place in Brazil has been reducing over time, though in the presence of negative shocks, the recovery is not going to be immediate due to the long memory nature of the data. Despite the absence of relevant investment relating to infrastructure expansion, it is worth mentioning the consolidation of a nationwide tolled road system in Brazil involving concessions to private administrators, alongside more severe traffic laws that can impose limitations on driving licences.

We summarise contributions made to the computational phase-field modelling of alloy solidification from the University of Leeds spoke of the LiME project. We begin with a general introduction to phase-field, and then reference the numerical issues that arise from solution of the model, before detailing each contribution to the modelling itself. These latter contributions range from controlling and developing interface-width independent modelling; controlling morphology in both single and multiphase settings; generalising from single to multi-phase models; and creating a thermodynamic consistent framework for modelling entropy flow and thereby postulate a temperature field consistent with the concepts of, and applicable in, multiphase and density-dependent settings.

Large ruminant production in developing countries is inefficient with low growth rates and likely high greenhouse gas emissions (GHGe) per unit of meat or milk produced. Trials conducted in Lao PDR from 2017-2020, studied ad-libitum supplementation for 12 weeks with 20kg high quality molasses nutrient blocks (MNB; Four Seasons Pty Ltd, Brisbane, Australia), that were either: non-medicated (NMB); fenbendazole-medicated (FMB5, Panacur100®, Coopers Australia, @ 5g/kg); triclabendazole-medicated (TMB5 or TMB10, Fasinex®, Novartis Australia, @ 5g/kg or @ 10g/kg, respectively); or formulated with urea (UMB8 or UMB10 @ 8% or 10% urea, respectively). Average daily gains (ADG) were determined for access to all MNB’s and compared with access to NMB’s, no supplementation, or previously determined free-grazing baseline ADG’s (55–84g in cattle; 92–106g in buffalo). ADGs were significantly improved following access to all MNBs for periods up to 12wks. ADGs following access to UMB8 or NMB were calculated for three age cohorts of cattle: young calves <8m (238-298g), growing cattle (143-214g) and lactating cows (179-191g). Modelling using IPCC Inventory software model V 2.69 of published data demonstrated a conservative net abatement of 350kg CO2e was achievable over a 200 day feeding period. An additional trial of Emissions control blocks (EMB’s, n = 200) distributed to farmers (n = 60) and two educational institutions, was conducted. Consumption rates (156g/day) and farmer and institutional acceptance of EMB’s were similar to published findings with other MNB’s, confirming all MNB’s and EMB’s improved animal productivity and body condition score, with healthier animals that were easier to manage. Modelling of changes in GHGe intensity identified an abatement of 470kg CO2e per EMB consumed, delivering a total project emissions abatement of 94t CO2e. Provision of MNBs and EMBs in smallholder large ruminant production systems is likely to achieve impressive abatement of GHGe due to improved efficiency of rumen fermentation and productivity.

Water quality forecasting is increasingly significant for agricultural management and environmental protection. Enormous amounts of water quality data are increasingly being collected by advanced sensors, which leads to an interest in using data-driven models for predicting trends in water quality. However, the unpredictable background noises introduced during water quality monitoring seriously degrade the performance of those models. Meanwhile, artificial neural networks (ANN) with feed-forward architecture lack the capability of maintaining and utilizing the accumulated temporal information, which leads to biased predictions in processing time series data. Hence, we propose a water quality predictive model based on a combination of Kernal Principal Component Analysis (kPCA) and Recurrent Neural Network (RNN) to forecast the trend of dissolved oxygen. Water quality variables are reconstructed based on kPCA method, which aims to reduce the noise from the raw sensory data and preserve actionable information. With the RNN's recurrent connections, our model can make use of the previous information in predicting the trend in the future. Data collected from Burnett River, Australia was applied to evaluate our kPCA-RNN model. The kPCA-RNN model achieved R2 scores up to 0.908, 0.823 and 0.671 for predicting the concentration of dissolved oxygen in the upcoming 1, 2 and 3 hours, respectively. Compared to current data-driven methods like ANN and SVR, the predictive accuracy of the kPCA-RNN model was at least 8 %, 17 % and 21 % better than the comparative models in these 3 cases. The study demonstrates the effectiveness of the kPAC-RNN modeling technique in predicting water quality variables with noisy sensory data.

Background: Sexual dysfunction is the most common side effect encountered by cervical cancer patients during and after treatment, and rehabilitation strategies are needed to improve their quality of life. A variety of rehabilitation strategies have been reported in previous studies, varying by country, race and even continent. However, the common rehabilitation strategies used by cervical cancer survivors in Tanzania and their outcomes are unknown. The study aimed to unfold sexual rehabilitation strategies and outcome practiced by cervical cancer survivors who experienced sexual dysfunction during and after treatment in North-western Tanzania. Methods: Descriptive qualitative study were employed. Phenomenology study design used with a sample of 7 participants and data corrected via in-depth interview guided by 11 questions. Audiotaped and transcribed to get main themes and sub themes through deductive analysis. Results: Most participants reported inability to achieve an orgasm and low libido and dyspareunia after treatment. Most participants were eagerly to have their sexual activity recovered. However, they were not familiar with any rehabilitation strategy after the experience of sexual dysfunction. Even though, some of the participants attempted various interventions, but all were unsatisfactory leading to a significant decline in sexual interest and activity. Conclusion: Cervical cancer survivors are not familiar with any sexual rehabilitation strategies. Health education concerning various sexual rehabilitation strategies should be provided to survivors during and even after treatment.

Recently, a paper was written to reformulate and strengthen the theory of semi-structured complex numbers H (a new number set invented to enable division by zero). Whilst the paper had profound results, the application of this number set in many areas of engineering and science has not been fully explored. Consequently, the aim of this paper was to establish the number set H as a useful mathematical tool by providing an amalgam of results arising from its application in several areas of engineering and science. In the process, this paper makes four major contributions: these are (1) determining the product of the gradients of a horizontal and vertical line; (2) developing new Euler formulas relating exponential, trigonometric and hyperbolic functions in the 3D semi-structured complex number Euclidean space; (3) establishing semi-structured complex numbers as a better extension of the complex number set than quaternions; (4) resolving singularities that may arise in engineering and science equations (because of division by zero) to develop reasonable conclusions in the absence of experimental data. These results and their applications provide a firm foundation to advance the number set H as a useful mathematical tool.

The production of high-quality castings without foundry defects at minimal production costs is a constant priority for foundries. Innovation and optimization of production processes are key to achieving this goal. Computer simulation of foundry processes offers a modern alternative to expensive and time-consuming experiments in real foundries and provides a reliable representation and analysis of casting and solidification processes. A detailed analysis of the casting and solidification simulation results allows the prediction of various risks that can cause defects in cast castings, thereby reducing their quality and, last but not least, the cost of their production. The paper deals with the analysis of a computer simulation of the casting of a brake disc in the Slovak foundry. This brake disc has had shrinkages and micro shrinkages that reduce the internal quality of the casting. These defects occurred in the ribs in the upper part of the casting under the feeders. A computer simulation of the casting and solidification of this casting was made according to real conditions. It turned out that the designed ingate system with a system of feeders was not sufficient to eliminate emerging defects. A new layout of the feeders was proposed, which ultimately eliminated the occurrence of defects based on the results of computer simulation. The input parameters were set to be as close as possible to the actual needs of the foundry. 3D models of the assemblies were designed in SolidWorks CAD software, and filling and solidification simulations were performed using the NovaFlow &amp; Solid CV 4.6r42 simulation program.

In the field of metallurgy, there are many factors that influence the final quality of cast iron. These are mainly charge materials, chemical composition, metallurgical preparation up to the final casting process. Even small deviations from metallurgical processing lead to fluctuations in melt quality and the occurrence of casting defects. Charge materials has a significant impact on the quality of cast iron, especially steel scrap, which is increasingly used from an economic and ecological point of view, especially when melting cast iron in electric furnaces. Cast iron produced from a higher proportion of steel scrap in the charge has higher hardness and tensile strength. On the other side, these cast irons has a higher tendency to chillout, brittleness, shrinkage, pearlitic microstructure, stresses and higher purity due to the difference in hardness at different wall thicknesses of the castings. It is the high hardness that is the problem in the final machining of castings. These negative properties are recorded mainly in heavy thick-walled castings with higher tensile strength and hardness. This negative effect is mainly due to the nitrogen content in the steel scrap. Based on these knowledges, operating melts were realized in the foundry's operating conditions. The influence of steel scrap in the charge and the possibility of eliminating its negative effects on the properties of cast iron were investigated.

The use of small Unmanned Aircraft Systems (sUAS ) as platforms for data capture has rapidly increased in recent years. However, while there has been significant investment in improving the aircraft, sensors, operations, and legislation infrastructure for such, little attention has been paid to supporting the management of the complex data capture pipeline sUAS involve. This paper reports on the outcomes of a four-year-long community-engagement-based investigation into what tools, practices, and challenges currently exist for particularly researchers using sUAS as data capture platforms. The key results of this effort are: (1) sUAS captured data – as a set that is rapidly growing to include data in a wide range of Physical and Environmental Sciences, Engineering Disciplines, and many civil and commercial use cases – is characterised as both sharing many traits with traditional remote sensing data and also as exhibiting – as common across the spectrum of disciplines and use cases – novel characteristics that require novel data support infrastructure. And (2), given this characterization of sUAS data and its potential value in the identified wide variety of use case, we outline eight challenges that need to be addressed in order for the full value of sUAS captured data to be realized. We then conclude that there would be significant value gained and costs saved across both commercial and academic sectors if the global sUAS user and data management communities were to address these challenges in the immediate to near future, so as to extract the maximal value of sUAS captured data for the lowest long-term effort and monetary cost.

The aim of this publication is to analyze the topic of high-frequency jet ventilation (HFJV), namely the catheter HFJV (C-HFJV) from a mathematical-physical as well as a clinical point of view. There are known issues with applying anesthesia and artificial lung ventilation (ALV) during surgical procedures in the upper airways, e.g. during bronchoscopy or tracheostomy. The principles, advantages, and disadvantages of HFJV are discussed in context with basic physical principles to clarify the proper use of this method. The basic technical principles of catheter construction, as well as its functional properties from a biophysical point of view, are introduced. Also, the placement of the catheter in the airways, the set-up of the HFJV ventilator, and the indications as well as the risks and contraindications of the use of C-HFJV are analyzed. This leads to the explanation of potentially optimal techniques for C-HFJV applications. In this article, we present the positive effects of C-HFJV even with complications such as bacterial or viral pneumonia, including COVID-19. In conclusion, we offer recommendations for clinical practice obtained from a literature review as well as from our own rich clinical experience.

This contribution addresses dry sliding friction of a “Non-Asbestos Organic” friction material (pad) rubbed against a pearlitic grey cast iron disc. This configuration is commonly used in brakes in US, Europe and Asia. The initial stage of friction is of particular interest when addressing “creep-groan” phenomena occurring in passenger and sport utility vehicles with automatic transmissions. The custom built Universal Friction Tester allowing the variation of sliding speed, test temperature, normal load, stiffness and humidity of the system was used in this experiment in combination with surface analysis by polarized light microscopy, scanning electron microscopy and stylus profilometry. The obtained results indicate that the “stick” phase in the so-called “stick-slip” phenomenon does not really exist. The surfaces of pad and disc are in continuous relative movement. The complexity of surfaces does not allow for a definitive description of exact mechanisms responsible for the detected changes of friction forces. The observed friction process can be rather described as a stretching with possible localized relaxations causing the jerky behavior in the stretching phase, followed by slip between two materials in contact. Understanding of factors contributing to the stretching at different scale levels of friction system is necessary for development of proper models. An accurate friction model should also incorporate the vibrational element introduced by phenomena occurring at the friction surfaces. The absence of heterogeneous regions on the friction surface and “evenly distributed friction level” can help when mitigating creep-groan in the investigated brake system. Understanding of factors on different scales of friction is also required when developing the improved brakes.

Hallux valgus deformity (HVD) involves subluxation of the first metatarsophalangeal joint. While HVD is primarily considered a forefoot condition, midfoot instability may play a significant role in its development and severity. Therefore, this review had a particular focus on understanding midfoot instability based upon weightbearing imaging assessments of the TMT joint. This review followed Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines and searched five databases for studies on midfoot instability in HVD patients. Severity of HVD was defined by hallux valgus angle (HVA) and distal metatarsal articular angle (DMAA). Data was extracted, and articles were graded using the Methodological Index for Non-Randomized Studies (MINORS). Of 547 initially retrieved articles, 23 met inclusion criteria. Patients with HVD showed higher HVA and DMAA on weight-bearing radiographs (WBRG) and weight-bearing computed tomography (WBCT) compared to healthy individuals. Midfoot instability was assessed through intermetatarsal angle (IMA) and tarsometatarsal angle (TMT angle). Patients with HVD exhibited greater IMA and TMT angles on both WBRG and WBCT. This review highlights the importance of weight-bearing imaging assessments for midfoot instability in HVD. IMA and TMT angles can differentiate between healthy individuals and HVD patients, emphasizing the significance of midfoot assessment in understanding HVD pathology.

The health and stability of trees are essential information for the safety of people and property in urban greenery, parks or along roads. The stability of the trees is linked to root stability but essentially also to trunk decay. Currently used internal tree stem decay assessment methods, such as tomography or penetrometry, are reliable but usually time-consuming and unsuitable for large-scale surveys. Therefore, a new method based on close-range remote sensed data, specifically close-range photogrammetry and iPhone LiDAR, was tested to detect decayed standing tree trunks automatically. The proposed study used the PointNet deep learning algorithm for 3D data classification. It was verified in three different datasets consisting of pure coniferous trees, pure deciduous trees or mixed data to eliminate the influence of the detectable symptoms for each group and species itself. The mean achieved validation accuracies of the models were 65.5 % for Coniferous trees, 58.4 % for Deciduous trees and 57.7 % for Mixed data classification. The accuracies indicate promising data, which can be either used by practitioners for preliminary surveys or for other researchers to acquire more input data and create more robust classification models.

: The objective of this work is to elucidate the role of partnerships and the number of partners necessary for lead user innovation outcomes. Lead user theory identifies these users as being ahead of market trends and experiencing significant benefits from innovating. So far, most lead user research has concentrated on firms and not individual lead users’ perspective. Data were obtained using a quantitative design during which 321 respondents participated. The SPSS software was used to analyze the data and determine significance. These findings indicate a connection between number of partners and lead user innovation success. This demonstrates that number of partners is significant in determining the success or failure of an innovation. This study provides empirical evidence that the number of partners is an essential factor that influences the success of innovation, and establishes the absolute numbers for achievement of successful innovation. Future studies must investigate the possible implications of integrating the partner variables with other characteristics of the lead user.

The up-to-date challenge towards clean road transport are non-exhaust emissions. Important advances regarding measurement systems, including well defined characterisation techniques, as well as regulation, will happen in the next few years. In this work we present detailed results of particle emissions from a test bed for wheel suspension and brakes, consisting of aerosol (size distribution, particle number (PN) and mass (PM)) and electron microscopy measurements (EM) under different load conditions. Standard tyres and brakes from series production were tested with a high-load driving cycle while particle measurements were conducted by gravimetric measurements and with a TSI SMPS, a TSI APS and a GRIMM OPS. Furthermore, samples were analyzed by electron microscopy. A bimodal particle size distribution (PSD) was obtained with the SMPS, with peaks at 20nm and around 400nm. EM analysis of &gt;1400 single particles from the electrostatic sampler matches the PSD results. EM analysis also showed ultrafine particles, mainly from O, Fe, Si, Ba, Mg and S and also fractal particles with high C fractions. Our results suggest, in agreement with previously published literature, that particulate emissions are related to brake disc temperature and occur in significant amounts above a threshold temperature.

Recently, a paper was written to establish semi-structured complex numbers ℍ (a new number set invented to enable division by zero) as a useful mathematical tool providing novel results from its application in engineering and science. Whilst the paper was a milestone, the application of this number set to quantum and classical physics had not been fully explored. Consequently, the aim of this research was to use semi-structured complex numbers to develop a new mathematical model for the mass of an object and in course unite classical and quantum physics in a simple yet effective manner. As its major contributions this paper: (1) develops a new mathematical model for the mass of an object called the wave-mass function using De Broglie’s mass and frequency relation and semi-structured complex numbers; (2) uses the new wave-mass function to determine what happens to an object traveling at the speed of light; (3) derives a relation between Schrödinger’s wave function and the new wave-mass function; (4) derives a relation between Einstein’s Field Equation and the new wave-mass function; (5) uses the wave-mass function to combine Einstein’s Field Equation with Schrödinger’s wave function to form a new quantum gravity equation. These results and their applications provide a firm foundation to advance the number set ℍ as a useful mathematical tool.

Ni-Al alloys have good corrosion-resistant properties making them preferable as a material of choice compared to ordinary metals. A good understanding of the phase diagram and thermodynamic properties of the Ni-Al alloy binary system is essential in determining relevant industrial applications of the system. The Ni-Al phase diagram is being reassessed since those found in the literatures are based on very old experimental studies. The phase diagram and thermodynamic properties of the Ni-Al alloy is determined using the Thermo-Calc 2022b software over a temperature range of 200 K to 2000 K and 1 atm of pressure. A total of nineteen fields (including elemental Al and Ni) comprising of five single solid phases, one liquid phase, and twelve double regions was obtained from the equilibrium calculation. The thermodynamic calculation has six invariant reactions comprising of two eutectic reactions (914.83 ± 0.025 K and 1641.80 ± 0.025 K), three peritectic reactions (1123.55 ± 0.025 K, 1400.72 ± 0.025 K and 1642.65 ± 0.025 K), and one peritectoid reaction (913.96 ± 0.025 K). The solubility of Al in Ni is also determined. The Thermo-Calc temperature – composition of the Ni-Al alloy is compared with the existing experimental studies to identify the physical properties of the different thermodynamic properties of the Ni-Al alloy binary system.

Real and complex analytic functions are largely studied in the field of complex analysis and are seen as very useful tools in solving problems in mathematics, physics and engineering. Real and complex numbers are a subset of semi-structured complex numbers (a new number set created to algebraically solve division by zero). Nevertheless, the properties of analytic functions made up of semi-structured complex variables (called semi-structured complex analytic functions) is yet to be explored. This limits the range of possible problems that can be resolved using analytic functions). In this regard, the aim of this paper was to expound upon the properties of semi-structured complex analytic functions and show their application in solving engineering problems. The results of this paper included (1) developing a full set of Cauchy–Riemann Equations for the semi-structured complex -space; (2) define sufficient and necessary conditions for a semi-structured complex function to be analytic; (3) determine the relationship between semi-structured complex analytic functions, Laplace’s Equations and Poisson’s Equations; and (5) provide an example of the use of these functions.