The process of identifying and approving a new drug is a time-consuming and expensive procedure. One of the biggest issues to overcome is the risk of hepatotoxicity, which is one of the main reasons for drug withdrawal from the market. While animal models are the gold standard in preclinical drug testing, the translation of results into therapeutic intervention is often ambiguous due to interspecies differences in hepatic metabolism. The discovery of human induced Pluripotent Stem Cells (hiPSCs) and their derivatives has opened new possibilities for drug testing. We used mesenchymal stem cells and hepatocytes both derived from hiPSC, together with endothelial cells, to miniaturize the process of generating hepatic organoids. These organoids were then cultivated in vitro using both static and dynamic cultures. Additionally, we tested spheroids composed solely by induced hepatocytes. By miniaturizing the system, we demonstrated the possibility of maintaining the organoids, but not the spheroids, in culture for up to 15 days. This timeframe may be sufficient to carry out a hypothetical pharmacological test or screening. In conclusion, we propose that the hiPSC-derived liver organoids model could complement or, in the near future, replace the pharmacological and toxicological tests conducted on animals.

Energy system modelling is an essential practice to assist a set of heterogeneous stakeholders in the process of defining an effective and efficient energy transition. From the analysis of a set of open source energy system models, it has emerged that most models employ an approach directed at finding the optimal solution for a given set of constraints. On the contrary, a simulation model is a representation of a system that is used to reproduce and understand its behaviour under given conditions, without seeking an optimal solution. Given the lack of simulation models that are also fully open source, in this paper a new open source energy system model is presented. The developed tool, called Multi Energy Systems Simulator (MESS), is a modular, multi-node model that allows to investigate non optimal solutions by simulating the energy system. The model has been built having in mind urban level analyses. However, each node can represent larger regions allowing wider spatial scales to be be represented as well. MESS is capable of performing analysis on systems composed by multiple energy carriers (e.g. electricity, heat, fuels). In this work, the tool’s features will be presented by a comparison between MESS itself and an optimization model, in order to analyze and highlight the differences between the two approaches, the potentialities of a simulation tool and possible areas for further development.

In a Water-Cooled Lithium-Lead (WCLL) Breeding Blanket (BB), the heat generated by the plasma thermal radiation and nuclear reactions is removed mainly by two components; namely, the First Wall (FW) and the Breeding Zone (BZ). The FW faces the neutrons and charged particles fluxes generated by the fusion reactions and the thermal radiation coming from the plasma. The present work takes into account the FW cooling system inspired by the WCLL BB 2018 design of DEMO 2017 baseline. Unlike the baseline where a Pressurized-Water Reactor (PWR) setup is used for the coolant, various setup between the Boiling Water Reactor (BWR) and the High-Pressure (HP) BWR are studied in the present work operating in the Two-Phase Flow (TPF) regime. The 3D model of the FW in the WCLL BB 2018 design is simplified into a 1D model and a steady state analysis is carried out to optimize the mass flow rate of the water and the number of parallel channels at the BB cells at different poloidal locations of the reactor, which helps not only in reducing the used coolant but also in improving the Tritium Breeding Ratio (TBR). The present work takes into account forced convection in the liquid only region, the subcooled boiling region, and the saturated boiling region using suitable empirical or semi-empirical models from the literature. The results are validated against the existing results in the literature. In the end, related conclusions are made regarding the pros and cons of the studied operating conditions.

Background: Pediatric obesity treatment is based on high-intensity lifestyle counseling. However, high dropout rates and low effectiveness have been reported even in specialized centers. Mobile health technologies have been used in research settings to overcome these limits with contrasting results. This study aims to evaluate the effectiveness of a six-month intervention with a mobile app for the treatment of pediatric obesity at 6 and 12 months of follow-up. Methods: Patients were randomly assigned to standard care or standard care plus mobile app (2:1). The mobile app delivered high-intensity lifestyle counseling for diet and physical activity. Results: Seventy-five subjects were prospectively enrolled. At six months of follow-up, the m-app group showed significantly lower dropout rates compared to standard care(p=0.01). The risk of dropout was significantly higher in controls compared to the intervention group (OR 3.86,95%C.I. 1.39-10.42,p=0.01). After one year of follow-up, we observed lower albeit non statistically significant dropout rates in the m-app compared to the standard care group(p=0.24). No differences were observed in terms of z-score BMI and percentage of BMI reduction between the two groups. Conclusion: our findings suggest that mobile app might help in the clinical management of children and adolescents with obesity in terms of dropout reduction.

Aims: The aim of our work was to demonstrate the possibility, in carefully selected cases, to perform operations under local anesthesia with a benefit to the patient and savings for national health care. Method: 123 patients with breast cancer underwent quadrantectomy or wide tumorectomy and sentinel lymph node removal under local anesthesia in out-patient surgery. Results: Of the 123 patients, 9 had micro-metastases and 4 had macro-metastases and only three of this had metastasis in other lymph nodes. Conclusions: Our results demonstrate that it is possible in selected cases to operate on breast cancer in out-patient surgery, with an advantage for the patient and savings for national health care.

High levels of air pollution can contribute to high rate of the COVID-19 outbreaks. Air pollutants induce oxidative stress, inflammatory process, immune imbalance and coagulation at systemic level, making the organism susceptible to complications caused by various pathogens, including viruses, resulting in a possible important damage co-factor. Sperm cells are highly sensitive to the pro-oxidant effects of environmental pollutants, and may represent an important alarm bell indicating that the burden of environmental pressure in a certain area is causing damage to humans. A comparison of the maps of COVID-19 case fatality rates, male infertility rates and air pollution may suggest a way to understand the dynamics of the virus impact. Semen quality may be considered as an early and sensitive environmental marker, and also a potential susceptibility indicator to viral insults (including SARS-CoV-2 ) in heavily polluted areas. Therefore, assessing the burden of environmental exposure of a given population and its potential susceptibility to insults through early biological stress indicators may be helpful for predicting the risk of the adverse effects by the SARS-CoV-2 epidemic .

This study examines change detection techniques in dense point clouds for the purpose of Cultural Heritage preservation, with a particular focus on the San Pietro Barisano Bell Tower in Matera, Italy. Dense point clouds, obtained via advanced laser scanning, offer detailed 3D representations of heritage structures, facilitating the precise monitoring changes over time. The investigation uses a variety of change detection algorithms, including the Iterative Closest Point (ICP) algorithm, which is renowned for its robust registration capabilities in aligning point clouds with high accuracy. The combination of ICP with deviation analysis and feature-based methods allows for the effective identification of alterations, including deformations, material loss, and surface degradation. This methodology establishes a comprehensive framework for the monitoring of Cultural Heritage, thereby enabling timely and targeted preservation efforts. The results emphasise the substantial contribution of dense point cloud analysis to the enhancement of heritage management and the safeguarding of vulnerable architectural sites.

Integrating nanomaterials like carbon nanotubes (CNTs) and iron oxide (Fe₃O₄) into epoxy composites has significant interest due to their potential to enhance mechanical properties. This study evaluates the impact of dispersion quality on the mechanical performance of CNT/Fe₃O₄/Epoxy composites, comparing stirring and sonication methods at three different loadings: 0.1, 0.3, and 0.5 wt.%. Tensile testing revealed that sonicated composites consistently outperformed stirred composites, with a significant increase in elastic modulus and ultimate tensile strength (UTS). However, fracture strain decreased in both composite types compared to pure epoxy, with sonicated composites experiencing a more significant reduction than stirred composites. These results underscore the importance of high-quality dispersion for optimizing mechanical properties.

Background: over the past 20 years, the treatment scenario of multiple sclerosis (MS) has radically changed and an ever-increasing number of disease-modifying treatments has emerged. Among high efficacy treatment agents, monoclonal antibodies (mAbs) have become a mainstay in the MS patient’s treatment due to their targeted mechanism, high efficacy and favorable risk profile. The latter varies from drug to drug and a skin cancer warning has emerged with sphingosine 1-phosphate receptors inhibitors. Several cases of skin malignancy in people with MS (pwMS) undergoing therapy with mAbs have also been described, but dermatological follow-up is not currently indicated. Objectives: the aim of this review is to investigate cases of cutaneous ma-lignancy during mAbs therapy and to explore possible pathophysiological mechanisms to evaluate the potential need for regular dermatological follow-up in pwMS treated with mAbs. Methods: literature search for original articles and review in PubMed. No date restrictions. Results: 1019 results were retrieved. Duplicates were removed using Endnote and manually. Only peer-reviewed studies published in English were considered for inclusion. At the end of these screening procedures, 54 studies published between 2001 and 2023 that met the objectives of this review were selected and reported. Conclusions: the available data do not show a clear link be-tween monoclonal antibody (mAb) treatment in pwMS and the risk of skin cancer. At present, these treatments remain contraindicated for people with cancer. Dermatological screening is ad-visable before starting mAb treatment in pwMS, and subsequent follow-up should be individual-ised according to each patient's risk profile.

The escalating demand for multifunctional and advanced materials for growing industries has turned scientific exploration to graphene-based hybrid filler polymer composites. The introduction of graphene with other fillers into polymer matrices results in astonishing properties and thus has gained significant attention in recent years. This study addresses the significance of graphene-based hybrid filler polymer composites in progressive materials science and engineering. The paper encloses some traditional and current preparation techniques employed in the fabrication of composites and a comprehensive review of successfully prepared graphene hybrid polymer composites with enhanced mechanical, thermal, and electrical properties reported in published research. The role of different factors, e.g., filler type, aspect ratios, filler-matrix compatibility, dispersion effects, homogeneity, filler orientation through polymer matrices, and curing conditions, are summarized. Finally, the applications in heavy industries, e.g., aerospace, electronics, energy storage, and automotive sectors were also analyzed. We hope this study will serve as a practical resource for new researchers and practitioners to understand and harness the full potential of these composites in various scientific and industrial fields.

Growth monitoring of crops is a crucial aspect of precision agriculture, essential for optimal yield prediction and resource allocation. Traditional crop growth monitoring methods are labor-intensive and prone to errors. This study introduces an automated segmentation pipeline utilizing multi-date aerial images and ortho-mosaics to monitor the growth of cauliflower crops (Brassica Oleracea var. Botrytis) using an object-based image analysis approach. The methodology employs YOLOv8, Grounding Detection Transformer with Improved Denoising Anchor Boxes (DINO), and the Segment Anything Model (SAM) for automatic annotation and segmentation. The YOLOv8 model was trained using aerial image datasets, which then facilitated the training of the Grounded Segment Anything Model framework. This approach generated automatic annotations and segmentation masks, classifying crop rows for temporal monitoring and growth estimation. The study’s findings utilized a multi-modal monitoring approach to highlight the efficiency of this automated system in providing accurate crop growth analysis, promoting informed decision-making in crop management and sustainable agricultural practices. Results indicate consistent and comparable growth patterns between aerial images and ortho-mosaics, with significant periods of rapid expansion and minor fluctuations over time. The results also indicated a correlation between the both the time and method of observation which paves a future possibility of integration of such techniques aimed at increasing the accuracy in crop growth monitoring based on automatically derived temporal crop row segmentation masks.

Background: Pancreatic neuroendocrine tumors (pNETs) represents a rare subset of pancreatic cancer. Functional tumors caused hormonal changes and clinical syndromes, while non-functional ones are often diagnosed late. Surgical management need a multidisciplinary planning, involving enucleation, distal pancreatectomy with or without spleen preserving, cen-tral pancreatectomy, pancreaticoduodectomy or total pancreatectomy. Minimally invasive ap-proach increased in the last decade compared to the open technique. The aim of this study is to analyze current diagnostic and surgical trends for pNETs, to identify better interventions and their outcomes. Methods: The study adhered to PRISMA guidelines, conducting a systematic review of literature from May 2008 to March 2022 across multiple databases. Several combinations of keywords was used ("NET", "pancreatic", "surgery", "laparoscopic", "minimally invasive", "robotic”, “enuclea-tion”,“parenchima sparing”) and relevant article references was manually checked. Manuscript quality was evaluated. Results: The study screened 3867 manuscripts, twelve studies were selected, primarily from Ita-ly, the United States, and China. A total of 7767 surgical treated patients was collected from 160 included centers. The mean age was 56,3 y.o. Enucleations (EN) and distal pancreatectomy (DP) was the most common performed surgery and represents 43.4% and 38.6% of the total interven-tions, respectively. Pancreatic fistula, post operative bleeding, re-operation and follow up was recorded and analyzed. Conclusions: Enucleation show better postoperative outcomes and lower mortality rates com-pared to pancreaticoduodenectomy (PD) or distal pancreatectomy (DP), despite similar risks of postoperative pancreatic fistula (POPF). DP was preferred over enucleation for pancreas body-tail, while laparoscopic enucleation is better for head pNETs.

The UNESCO World Heritage Hadrian’s Villa lies over the Colli Albani volcanic district near Rome. Magnetic, paleomagnetic, radar, and electric resistivity surveys were performed in the Plutonium–Inferi sector to detect buried buildings and outline a segment of the underground system of tunnels that link different zones of the villa. In particular, a paleomagnetic analysis of the bedrock unit allowed to accomplish an accurate geomagnetic field modelling and characterize the archaeological sources of the magnetic field anomalies. We used a computer-assisted forward modelling procedure to generate a structural model of the sources of the observed anomalies. The intrinsic ambiguity of the magnetic field modelling was reduced with the support of ground penetrating radar amplitude slices and an analysis of radar and electric resistivity profiles. The bedrock lithology in this area is an ignimbrite tuff characterized by abundant iron oxides. The high-amplitude magnetic anomalies observed in the Plutonium–Inferi area are due to strong bedrock remnant magnetization and susceptibility contrasts between topsoil infill of cavities and the surrounding tuff. The resulting magnetization model of the Plutonium–Inferi complex shows that the observed anomalies are mostly due to the presence of tunnels, skylights and a system of ditches excavated in the tuff.

Benign Paroxysmal Positional Vertigo (BPPV) represents the most frequent cause of peripheral vertigo. In most cases it is successfully treated by canalith repositioning procedure (CRP), but it is often followed by a continuous lightheadedness in absence of vertigo or nystagmus (residual dizziness, RD). Our aim is to describe the clinical effectiveness and the urine metabolomics profile treating these patients by a polyphenol compound supplementation. We enrolled 30 patients reporting RD after BPPV successfully treated using CRP. A supplementation with a Polyphenol compound was administered for 60 days, and patients were evaluated after 30 and 60 days of treatment by a self-administered questionnaires (Visual Analog Scales for Dizziness and Nausea, Dizziness Handicap Inventory, DHI) and by urine metabolomics analysis performed by 1H-NMR spectroscopy and multivariate followed by univariate analysis. Most patients reported an excellent or good efficacy of RD with a significant decrease for VAS and DHI values. The metabolomics analysis identified six significant metabolites related to the treatment: 1-methylnicotinamide, anserine, Hippurate, lysine, methyl succinate, and urea indicating an inflammatory activities and antioxidant properties of the polyphenol compound. These preliminary data suggest that supplementation with a polyphenol compound cold induces some metabolic changes that can help recover RD. However, the future steps will require confirmation with a more significant cohort of patients and an extension of the metabolomic evaluation to other problems concerning the different clinical aspects of BPPV, such as the high relapse found in a high percentage of patients.

Cigarette smoke (CS) is a major driver of many respiratory diseases including chronic obstructive pulmonary disease (COPD) and non-small cell lung cancer (NSCLC). Tobacco causes oxidative stress, impaired phagocytosis of alveolar macrophages (AMs), and alterations in gene expression in the lungs of smokers. MicroRNAs (miRNAs) are small non-coding RNAs that influence several bi-ological processes and interfere with several regulatory pathways. The purpose of this study was to assess the effect of active CS on miRNAs expression in AMs obtained from bronchoalveolar lavage (BAL) of ever- or never-smoker subjects and patients with COPD or NSCLC. BAL specimens were collected from 43 sex-matched subjects to determine the expression of has-miR-34a-5p, 17-5p, 16-5p, 106a-5p, 223-5p, and 20a-5p before and after in vitro CS exposure by RT-PCR. In addition, bioin-formatic analysis of miRNAs target genes linked to inflammation was performed. Distinct and common miRNA expression profiles were identified in response to CS, suggesting their possible role in smoking-related diseases. It is noteworthy that, following exposure to CS, the expression levels of hsa-miR-34a-5p and 17-5p in both ever- or never-smokers, 106a-5p in never-smokers and 20a-5p in ever-smokers, shifted towards those found in individuals with COPD, suggesting them like a risk factor in developing this lung condition. Moreover, we identified miRNA targets involved in the immune system or AMs property regulation using in silico analysis. In conclusion, our study iden-tified miRNA signatures in AMs exposed to CS, indicating that CS is an important driver of epige-netic changes that contribute to the onset of various lung diseases.

Graphene hybrid-filler polymer composites have emerged as prominent materials that revolutionize heavy industries. This study encapsulates the in-depth analysis of different influential factors such as filler/graphene type, aspect ratios, dispersion methods, filler-matrix compatibility, fiber orientation, synergistic effects, different processing techniques, and post-curing conditions that affect the processing, properties and determine the resultant applications of graphene hybrid polymer composites. Additionally, it discusses the substantial role of graphene collaboration with other fillers such as carbon nanotubes, silica, nano-clays and metal oxides to produce functionalized hybrid polymer composites with synergistically enhanced tailored properties to offer solutions for heavy industries like aerospace, automotive, electronics, and energy harvesting. The review concludes with some suggestions and outlook on the future of these composite materials by emphasizing the need for continued research to fully optimize their potential.

Data security in the Internet of things (IoT) is often implemented by means of encryption, which can be burdensome for some entities. We propose in this paper a solution based on routing, by which data are forwarded only to entities that are intended to receive them. An IoT network can be seen as a partial order of equivalence classes of entities, and each entity can be labeled according to the position of its equivalence class in the partial order. The partial order can be constructed according to requirements of secrecy (or confidentiality), integrity and conflicts. Routing tables among entities can be compiled by using the labels. The method is demonstrated in this paper for Software defined networking (SDN) routers and controllers. We propose a centralized IoT architecture with a cloud structure using SDN as networking infrastructure, where storage entities (i.e. cloud servers) are associated with application entities. A small ‘hospital’ example is shown for illustration. Procedures for network reconfigurations are discussed. We also demonstrate the method for the normal case where different partial orders coexist among a set of entities. The method proposed does not impose an overhead on the normal functioning of an SDN network, since it requires calculations only when the network must be reconfigured, because of administrative intervention or policies.

In this paper, we propose and demonstrate a network analysis optical frequency domain reflectometer (NA-OFDR) for distributed temperature measurements at high spatial (down to 3 cm) and temperature resolution. The system makes use of a frequency-stepped, continuous-wave (cw) laser, whose output light is modulated using a vector network analyzer. The latter is also used to demodulate the amplitude of the beat signal obtained by coherently mixing the Rayleigh backscattered light with a local oscillator. The system is capable of high measurand resolution (50 mK at 3-cm spatial resolution), thanks to the high sensitivity of coherent Rayleigh scattering to temperature. Furthermore, compared to the conventional optical-frequency domain reflectometry (OFDR), the proposed system does not rely on the use of a tunable laser, therefore it is less prone to limitations related to the laser coherence or sweep nonlinearity. Two configurations are analyzed, both numerically and experimentally, based on either a double sideband or single sideband modulated probe light. The results confirm the validity of the proposed approach.

The time series of daily new cases of Covid-19 infection in different zones of Italy, several European countries and New York City were analyzed in order to characterize the large fluctuations contained in them. The comparison shows that the time series share a similar evolution, although with delays of one or two weeks, with Italy that precedes the other countries. Correlation analysis indicates a strict resemblance between the time series of the first differences, which emphasize accelerations and slowdowns of the epidemic (e.g., correlation coefficient r=0.70 for Italian vs. worldwide data). According to Fourier analysis the signals have a dominant oscillatory component at a period of seven days, with minima located near the weekends. Some of the possible causes of this time modulation are discussed. In particular, it is hypothesized a delayed or missed recognition of a significant fraction of the new cases during the weekend, with possible consequences for the evolution of the epidemic.

Alcoholic liver disease (ALD) is a major cause of chronic liver disease. This term covers a broad spectrum of liver lesions, from simple steatosis to alcoholic hepatitis and cirrhosis. The patho-genesis of ALD is multifactorial and not fully elucidated due to complex mechanisms related to direct ethanol toxicity with subsequent hepatic and systemic inflammation. The accumulation of pro-inflammatory cytokines and the reduction of anti-inflammatory cytokines promote the development and progression of ALD. To date, there are no targeted therapies to counteract disease progression and prevent acute liver failure. Corticosteroids reduce mortality by acting on the hepatic-systemic inflammation. On the other hand, several studies analyzed the effect of the inhibition of pro-inflammatory cytokines and the stimulation of anti-inflammatory cytokines as potential therapeutic targets in ALD. This narrative review aims to clarify the role of the cy-tokines in the pathogenesis and treatment of ALD.

Tadalafil is a selective phosphodiesterase type-5 (PDE5) inhibitor that is approved for the treatment of men with erectile dysfunction (ED) and/or benign prostate hyperplasia (BPH) associated symptoms. Besides its classical actions on PDE5 within the genitourinary tract, where the specific enzyme expression is maximal, it may exert different systemic effects. This is mainly due to the pleiotropic distribution of PDE5 enzyme throughout human (and animal) body, where it can exert protective effects in different clinical conditions. Recently, it has been demonstrated that tadalafil may display novel actions on androgen receptor (AR) expression and activity, cytochrome P19a1 (Cyp19a1) and estrogen receptor β (ERβ) expression in different in vitro systems, such as adipose, bone and prostate cancer cells where it can act as a selective modulator of steroid hormone production. This may determine novel potential mechanism(s) of control in pathophysiologic pathways. In this review we summarize basic research and translational results applicable to the use of tadalafil in the treatment of different clinical conditions.

Chronic obstructive pulmonary disease (COPD) is a progressive lung disease that is commonly considered to be a potent driver of non-small cell lung cancer (NSCLC) development and related mortality. A growing body of evidence supports the role of the immune system, mainly played by alveolar macrophages (AMs), as key axes regulating the development of COPD or NSCLC phenotypes in response to harmful agents. MicroRNAs (miRNAs) are small non-coding RNAs that influence most biological processes and interfere with several regulatory pathways. The purpose of this study was to assess miRNA expression patterns in patients with COPD, NSCLC, and ever- or never-smoker controls to explore theirinvolvment in smoking-related diseases. Bronchoalveolar lavage (BAL) specimens were collected from a prospective cohort of 43 sex-matched subjects to determine expression of hsa-miR-223-5p, 16-5p, 20a-5p, -17-5p, 34a-5p and 106a-5p by RT-PCR. In addition, bioinformatic analysis of miRNA target genes linked to cancer was performed. Distinct and common miRNA expression levels were identified in each pathological group suggesting their possible role as an index of NSCLC or COPD microenvironment. Moreover, we identified miRNA targets linked to carcinogenesis using in silico analysis. In conclusion, this study identified miRNA signatures in AMs, allowing us to understand the molecular mechanisms underlying smoking-related conditions and potentially providing new insight for diagnosis or pharmacological treatment.

Silicon-based thin-films and nanostructures are of paramount importance in a wide range of applications, including microelectronics, photovoltaics, large area sensors, as well as biomedicine. The wide accessibility of silicon and its relatively low cost have driven a continuous improvement of the technology based on this element. Plasma technology has been widely used for the synthesis of coatings and nanostructures based on silicon. Moreover, it has given a fundamental contribution for continuously improving the control of the physicochemical properties of silicon-based materials, and for allowing the synthesis of nanometric structures with well-defined shape and morphology. In this work, we have reviewed the most interesting developments of plasma-assisted processed for the synthesis of Si-based materials, both inorganic and organic, in the last five years. A special attention has been given to the new techniques, or modifications of already existing ones, that open new possibilities for the synthesis of materials with new properties, as well as nanostructures with novel characteristics.

Ecological information of invasive alien species are crucial for their effective management. How-ever, they are often lacking in newly invaded ecosystems. This is the case of the European catfish Silurus glanis L. in Lake Maggiore where the species is present since 1990 but no scientific infor-mation are available on its ecology. To start filling this knowledge gap, 236 catfish (67 cm to 150 cm of total length) were collected, measured, and dissected for stomach content analyses from three localities and in two habitats (littoral vs. pelagic) in late autumn/early winter. NPUE and BPUE (individuals and biomass (g) per unit effort (m2)) of catfish was generally higher in littoral (NPUE > 0.01; BPUE > 96) than pelagic habitats (NPUE < 0.009; BPUE < 114) but catfish had, on average, larger sizes in pelagic habitats. Overall, 581 individual prey items were recorded belonging to12 taxa. Pelagic catfish specialized their diet exclusively on three prey fish (coregonids, shad and roach) whilst the diet of littoral catfish was more variable, and was dominated by crayfish, perch, and roach. These results highlighted for the first time the interaction of larger catfish with the lake’s pelagic food web, and thus possible consequences are discussed, including the potential contrasting role S. glanis may have for the lake’s fishery.

The demand for polymer composites with improved mechanical and electrical properties is crucial for advanced aerospace, electronics, and energy storage applications. Single-walled carbon nanotubes (SWCNTs) and iron oxide (Fe₃O₄) nanoparticles are key fillers that enhance these properties, yet challenges like orientation, uniform dispersion, and agglomeration must be addressed to realize their full potential. This study focuses on developing SWCNTs/Fe₃O₄ epoxy composites by keeping the SWCNT concentration constant at 0.03 Vol.% and varying Fe₃O₄ concentrations at 0.1, 0.5, and 1 Vol.% with two different configurations: randomly orientated (R-) and magnetic field-assisted horizontally aligned (A-) SWCNTs/Fe3O4 epoxy composites and investigates the effects of filler concentration, dispersion, and magnetic alignment on the mechanical and electrical properties. The research reveals that both composite configurations achieve an optimal mechanical performance at 0.5 Vol.% Fe₃O₄, while A- SWCNTs/Fe3O4 epoxy composites outperformed at all concentrations. However, at 1 Vol.% Fe₃O₄, mechanical properties decline due to nanoparticle agglomeration, which disrupts stress distribution. In contrast, electrical conductivity peaks at 1 Vol.% Fe₃O₄, indicating that the higher density of Fe₃O₄ nanoparticles enhances the conductive network despite the mechanical losses. This study highlights the need for precise control over filler content and alignment to optimize mechanical strength and electrical conductivity in SWCNTs/Fe₃O₄ epoxy nanocomposites.

Big Epidemiology is an innovative framework that extends the interdisciplinary approach of Big History to understand disease patterns, causes, and effects across human history on a global scale. This comprehensive methodology integrates epidemiology, genetics, environmental science, sociology, history, and data science to address contemporary and future public health challenges through a broad historical and societal lens. The foundational research agenda involves mapping the historical occurrence of diseases and their impacts on societies over time, utilizing archaeological findings, biological data, and historical records. By analyzing skeletal remains, ancient DNA, and artifacts, researchers can trace the origins and spread of diseases, such as Yersinia pestis in the Black Death. Historical documents, including chronicles and medical treatises, provide contextual narratives and quantitative data on past disease outbreaks, societal responses, and disruptions. Modern genetic studies reveal the evolution and migration patterns of pathogens and human adaptations to diseases, offering insights into co-evolutionary dynamics. This integrative approach allows for temporal and spatial mapping of disease patterns, linking them to social upheavals, population changes, and economic transformations. Big Epidemiology also examines the roles of environmental changes and socioeconomic factors in disease emergence and re-emergence, incorporating climate science, urban development, and economic history to inform public health strategies. The framework reviews historical and contemporary policy responses to pandemics, aiming to enhance future global health governance. By addressing ethical, legal, and social implications, Big Epidemiology seeks to ensure responsible and effective epidemiological research and interventions. This approach aims to profoundly impact how we understand, prevent, and respond to diseases, leveraging historical perspectives to enrich modern scientific inquiry and global public health strategies.

The rapid and accurate detection of viruses and the discovery of single nucleotide polymorphisms (SNPs) are crucial for disease management and understanding viral evolution. In this study, a pipeline for virus detection, validation, and SNP discovery from next-generation sequencing (NGS) data is presented. By integrating state-of-the-art bioinformatics tools with artificial intelligence, the pipeline processes raw sequencing data to identify viral sequences with high accuracy and sensitivity. Before aligning the reads to the reference genomes, quality control measures and adapter trimming are performed to ensure the integrity of the data. Unmapped reads are subjected to de novo assembly to reveal novel viral sequences and genetic elements. The effectiveness of the pipeline is demonstrated by the identification of virus sequences, illustrating its potential for the detection of known and emerging pathogens. SNP discovery is performed using a custom Python script that compares the entire population of sequenced viral reads to a reference genome. This approach provides a comprehensive overview of viral genetic diversity and identifies dominant variants and a spectrum of genetic variations. The robustness of the pipeline is confirmed by the recovery of complete viral sequences, which improves our understanding of viral genomics. This study highlights the synergy between traditional bioinformatics techniques and modern approaches, providing a robust tool for analyzing viral genomes and contributing to the broader field of viral genomics.

In this review we collect some recent achievements in the accurate and efficient solution of the Nonlinear Schrödinger Equation (NLSE), with the preservation of its Hamiltonian structure. This is achieved by using the energy-conserving Runge-Kutta methods named Hamiltonian Boundary Value Methods (HBVMs) after a proper space semi-discretization. The main facts about HBVMs, along with their application for solving the given problem, are here recalled and explained in detail. In particular, their use as spectral methods in time, which allows efficiently solving the problems with spectral space-time accuracy.

Herein we present the biocatalysed preparation of mono-N-carbamate-protected precursor of antitumoral Nutlin-3a, through enantioselective alkoxycarbonylation of meso-1,2-disubstituted-1,2-diaminoethane, using enzyme lipases and dialkyl carbonates as acylating agents. A series of supported or free lipase enzymes were screened in combination with commercially available diallyl-, diethyl and dimethyl- carbonate. The reactions were conducted at different temperatures, reaction times and with variable co-solvent systems to evaluate the effect on the enzyme catalytic activity. The best results in terms of conversion, enantiomeric excess and yield were obtained when lipase from Candida antarctica B (CAL-B) was used with diallyl carbonate (DAC) conducting the reaction solventless at 75 °C.

Cardiac arrest (CA) is a life-critical condition. Patients who survive after CA, they go into a defined post-cardiac arrest syndrome (PCAS). In this clinical context, the role of the echocardiogram in recent years has become increasingly important to assess the causes of arrest, the prognosis, and any direct and indirect complications dependent on cardiopulmonary resuscitation (CPR) maneuvers. The aim of our review is to evaluate the increasingly important role of the transthoracic and transesophageal echocardiogram in the CA phase and especially post-arrest, analyzing the data already present in the literature.

A number of research projects and a rich literature have dealt with the theme of abandoned medieval villages in Sardinia since the end of the 60s of the last century. Some more or less precise catalogues and reviews of villages in limited territories have been published. Only recently, however, this subject is being addressed in an interdisciplinary manner, combining traditional historical research with the results of archaeological surveys and excavation campaigns, geo-archaeology, toponymy, paleoclimatology. This allows us to have a picture of the landscape and human settlement evolution with its historical changes, conditioned not only by institutional superstructures but also by human and natural traumatic events. Particular attention will be given to the sudden changes that occurred between the thirteenth and fourteenth centuries. To carry out this survey, it is possible to use some very powerful IT tools which, through the aggregation, organization, correlation and management of information, allow the geo-localization of abandoned villages as proven by the documentary evidence. Thus, on this documentation, existing and acquired in the future, is founded the construction of the related information system. The most easy and suitable tools for this purpose are the CMSs (Content Management Systems) which, in association with GIS (Geographic Information Systems) engines, allow spatial and contextual analysis of the settlements, as they were inserted in their territory. This type of tools aggregates different peculiarities of the object of study, supporting a multidisciplinary reading on the argument. The computerized tools, integrated as a system, offer the possibility to implement it, feeding it and correcting it continuously, basing on new acquisitions. In this study, we will examine a historical areal, for which we have a sufficient number of sources available: Sarrabus, Colostrai and Quirra, adding to the geographical visual information, the temporal visual evolution.

Graphs are largely used in computer science to model relations, or associations, among entities the compose complex systems. More recently, they found a broad field of application in bioinformatics and medical informatics supporting modelling, analysis of many systems. The applications span from representing interactions among molecules within cells, to model the functions of the brains. In order to support research, algorithms from graph theory that are able to extract knowledge from network should be coupled to efficient visualisation techniques. Although the importance of such topic, we retain that many challenges should be faced in the futures, such as automated pathway and network layout to better match biologists’ needs, the developing of a standard able to give more and better choices to represent nodes, edges finally, the developing of automated mechanism able to improve the network navigation methods that help users manage large and complex networks with the goal to improve the usability.

Sustainability of current energy policies and known mid-term policies are analised in their multiple facets. First an overview is given about the trend of global energy demand and energy production, analysing the share of energy sources and the geographic distribution of demand, on the basis of statistics and projections published by major agencies. The issue of sustainability of the energy cycle is finally addressed, with specific reference to systems with high share of renewable energy and storage capability, highlighting some promising energy sources and storage approaches.

This paper discusses the theoretical and experimental correlations between fatigue and static strength statistical distributions. We use a two-parameter residual strength model that obeys the qualitative Strenght-Life Equal-Rank (SLERA) assumption for guidance. The modeling approach consists of recovering the model's parameters by best fitting the constant amplitude (CA) fatigue data at a given stress ratio, R, and the experimental Weibull parameters of the static strength distribution function. Once the model's parameters are fixed, its capabilities, potential, and limits are discussed by comparing its predictions with residual strength and fatigue data obtained at different stress ratios, R. Moreover, from a preliminary analysis, the theoretical extension of the model's capabilities to variable amplitude loadings is conceptualized. The application of Miner's rule is also discussed and compared with a new damage rule to analyze the fatigue responses under variable amplitude loadings.

Introduction: SARS-CoV-2 infection was first reported in 2019 and has since spread throughout the world. This is a cross-sectional study in cooperation with 118 Department of Pre-Hospital and Territorial Emergency (118 SET) of Taranto City and the University of Bari, Aldo Moro, and the School of Medicine from Italy. We conducted a study on how the COVID-19 epidemics evolved and how it was contained by different countermeasures by taking into account data showing socio-demographic and that older persons, as well as individuals with comorbidities and poor metabolic health, and people coming from economically depressed areas with lower quality of life in general, are more likely to develop severe COVID-19 infection. Objective: Examine the association between county-level socio-demographic risk factors and COVID-19 incidence and mortality, determining the possible emo-biological markers, ferritin, and lymphocytes, that could be indicative of SARS-CoV-2 infection. Methods: Descriptive cross-sectional study on 600 patients examined and treated at general hospital Ninh Thuan from January to September 2022. Results: 33/600 patients were confirmed to be infected with SARS-CoV-2 (5.5%), males 4.8% and females 5.8%, the median age of infected patients is 36 years. Most infections were mild (75.8%). Our results revealed that the structure and the spatial arrangement of socio-demographic arrangements are important either as epidemiological determinants or as disease markers. Conclusion: Approximately 5.5% of patients infected with SARS-CoV-2 come to examination and treatment at the hospital, these findings suggested that possible infection rate in the burden of the COVID-19 pandemic, the sociodemographic risk factors, and their root causes must be addressed. In addition, lab results obtained from affected patients showed that lymphocytes and ferritin could be considered traits of mild COVID-19 infection.

Neural or mental simulation of actions is a powerful tool for allowing cognitive agents to develop Prospection Capabilities that are crucial for learning and memorizing key aspects for challenging skills. In previous studies we developed an approach based on the animation of the redundant human Body Schema based on the Passive Motion Paradigm (PMP). In this paper we show that this approach can be easily extended to hyper-redundant serpentine robots as well as to hybrid configurations where the serpentine robot is functionally integrated with a traditional skeletal infrastructure. A simulation model is analyzed in detail showing that it incorporates spatio-temporal features discovered in the biomechanical studies of biological hydrostats like the elephant trunk or the octopus tentacles. It is proposed that such generative internal model can be the basis for a cognitive architecture appropriate for serpentine robots, independent of the underlying design and control technologies. Although robotic hydrostats have received a lot of attention in the last decades, the great majority of research activities have been focused on the actuation/sensorial/material technologies that can support the design of hyperredundant soft robots as well as the related control methodologies. The cognitive level of analysis has been limited to motion planning, without addressing synergy formation and metal time travel. This is where the contribution of the paper is focused on.

The Italian Stone Pine (Pinus pinea L.) is one of the most employed ornamental trees in towns with Mediterranean climates. For example, in the city of Rome, Pinus is the most common genus, with more than 51,000 trees. This study investigates technical and economic features of maintenance operations of Stone Pines and evaluates the productivity and costs of the observed yards. Pruning and felling are the most frequent management operations of trees in towns and this study analyzes the features of these operations carried out in 14 work sites. The operations were carried out either with aerial platforms (19 trees) or ascending the crown by tree-climbing (6 trees). The operations were sampled with time studies (12 trees for pruning and 13 for felling). Work time was measured from the beginning of operations to the transport of the residual biomass to the collection and loading point, using centesimal stopwatches and video recording. The total residual biomass was weighed or assessed. Total observation time amounted to 63.1 hours. The evaluation of the costs of each work site considered the fixed and the variable costs and the costs for the labor force. A Multiple Linear Regression model (statistics: determination coefficient R2: 0.74, adjusted R2: 0.67, p-value < 0.001) which utilizes four regressors easily evaluable before the work, was adopted to predict the gross time of the operations. This paper can contribute to optimize trees maintenance methods in urban sites and to assess the potential residual wood biomass attainable from urban forestry maintenance in the city of Rome.

The COVID-19 appears as a catastrophic health risk with psychological, emotional, social and relational implications. From the early stages of the virus spread, the elderly population was identified as the most vulnerable and the health authorities have rightly focused on such frailest population. Conversely, less attention was paid to emotional and psychological dimension of children and adolescents. Actually, they were less at risk quoad vitam or quoad valetudinem, nevertheless they had to face a reality of anxiety, fears and uncertainties. The current study investigated state anxiety and emotion awareness in a healthy sample of older adolescents, 84 females and 64 males, aged 17 to 19, during the pandemic lockdown, using Self-rating Anxiety Scale and the Italian Emotion Awareness Questionnaire. An unexpected anxious phenomenology, impacting the anxiety ideo-affective domain, was found, while the somatic symptomatology appeared to be less severe. The highest anxiety symptom were the breathing difficulties. These findings supported the hypothesis that the COVID-19 pandemic may be a risk condition for an increased state anxiety in older adolescents and suggest the need to provide 1. an effective, empathic communication system with the direct participation of older adolescents, 2. a psychological counseling service for stress management of adolescents.

Idiopathic acute pancreatitis (IAP) presents a diagnostic challenge and refers to cases where the cause of acute pancreatitis remains uncertain despite a comprehensive diagnostic evalua-tion. Endoscopic ultrasound (EUS) has emerged as a valuable tool in the diagnostic workup of IAP. This review explores the pivotal role of EUS in detecting the actual cause of IAP, as-sessing its accuracy, timing, safety, and future technological improvement. Following PRISMA guidelines, 60 pertinent studies were selected and analysed. EUS emerges as a cru-cial diagnostic tool, particularly when conventional imaging fails. It can offer intricate visu-alization of the pancreas, biliary system, and adjacent structures. High accuracy of EUS is evident in detecting the actual causes of IAP such as microlithiasis, small bile duct stones, pancreas divisum, and small pancreatic tumors. Optimal timing for EUS is post-resolution of the acute phase of the disease. EUS, when conducted by experienced endoscopists, it boasts minimal safety concerns, and is crucial to prevent complications. EUS-guided interventions, including fine-needle aspiration, collection drainage, and biopsies, aid in cytological analy-sis. With high diagnostic accuracy, safety, and therapeutic potential, EUS is able to improve patient outcomes when managing IAP. Further refinement of EUS techniques and cost-effectiveness assessment of EUS-guided approaches need to be explored in multicenter prospective studies. This review underscores EUS as a transformative tool in unraveling IAP's enigma and advancing diagnostic and therapeutic strategies.

During embryonic development stem cells undergo the differentiation process so that they can specialise for different functions within the organism. Complex programs of gene transcription are crucial for this process to happen. Epigenetic modifications and the architecture of chromatin in the nucleus, by the formation of specific regions of active as well as inactive chromatin, allow the coordinated regulation of the genes for each cell fate. In this mini review, we discuss the current knowledge regarding the regulation of three-dimensional chromatin structure during neuronal differentiation. We also focus on the role played in neurogenesis by the nuclear lamina that ensures the tethering of the chromatin to the nuclear envelope.

Oestrogen receptor expression in breast cancer (BC) cells is a marker of high cellular differentiation and allows the identification of two BC groups (ER-positive and ER-negative) that, although not completely homogeneous, differ in biological characteristics, clinical behaviour and therapeutic options. The study, based on three publicly available EWAS datasets, focuses on the comparison between these two groups of breast cancer using an epimutation score. The score is calculated not only based on the presence of the epimutation but also on the deviation amplitude of the methylation outlier value. For each dataset, we performed a functional analysis based first on the functional gene region of each annotated gene (we aggregated the data per gene region TSS1500, TSS200, first-exon, body-gene identified by the information from the Illumina Data Sheet) and then we performed a pathway enrichment analysis through the REACTOME database based on the genes with the highest epimutation score. Thus, we blended our results and found common pathways for all three data sets. We found that a higher and significant epimutation score due to hypermethylation in ER-positive BC is present in the promoter region of the genes belonging to the SUMOylation pathway, the NOTCH pathway, the IFN-$\gamma$ signalling pathway and the deubiquitination protease pathway; while a higher and significant level of epimutation due to hypomethylation in ER-positive BC is present in the promoter region of the genes belonging to the ESR-mediated pathway. The presence of this state of promoter hypomethylation in the ESR-mediated signalling genes is consistent and coherent with an active signalling pathway mediated by oestrogen function in the group of ER-positive BC. SUMOylation and NOTCH pathways are associated with BC pathogenesis and have been found to play distinct roles in the two BC subgroups. We speculated that the altered methylation profile may play a role in regulating signalling pathways with specific functions in the two subgroups of ER-BC.

Recently, many independent research project focus on the study of the molecular basis of aging processes. I parallel, the different progression of many diseaes between sex is a hot topic research area. These studies require many data, models and tools for inferring aging and sex specific molecular machinaries. Among the others, the Genotype-Tissue Expression (GTEx) database is one of the preminent resources for the analysis of expression data related to tissues, sex and age. The current version of the database has a lot of querying interface that enable many analysis centered on the expression of genes on tissues. Despite this the database lacks on the analysis at sex/age level, thus the researcher has to download data and then write queries by hand. Nevertheless it lacks on the integration with existing protein interaction data. Therefore, the need for the introduction of tools enabling easy access and powerful analysis capabilities (i.e. state of the art network based analysis and integration), arises. We here present NOMA-DB a framework for the analysis of age related genes based on the GTEx database that enable easy querying at sex/age level, network based analysis. The framework is based on wrapping the GTEx database and on building an application logic level on top of existing data. The current version enables the analysis of genes by tissue, gene and age, thus it may be used in potentially future directions of analysis towards better comprehension of aging/sex-related molecular machineries based on the analysis of expression dat

In the paper, the authors express the Fuss–Catalan numbers as several forms in terms of the Catalan–Qi function, find some analytic properties, including the monotonicity, logarithmic convexity, complete monotonicity, and minimality, of the Fuss–Catalan numbers, and derive a double inequality for bounding the Fuss–Catalan numbers.

Inside hippocampal circuits, neuroplasticity events that individual cells may undergo during synaptic transmissions occur in the form of Long Term Potentiation (LTP) and Long Term Depression (LTD). The high density of NMDA receptors expressed on the surface of the dendritic CA1 spines confers to hippocampal CA3-CA1 synapses, the ability to easily undergo NMDA-mediated LTP and LTD, that is essential for some forms of explicit learning in mammals. Providing a comprehensive kinetic model that can be used for running computer simulations of the synaptic transmission process is currently a major challenge. Here, we propose a compartmentalized kinetic model for CA3-CA1 synaptic transmission. Our major goal was to tune our model in order to predict the functional impact caused by disease associated variants of NMDA receptors related to severe cognitive impairment. Indeed, for variants Glu413Gly and Cys461Phe, our model predicts negative shifts in the glutamate affinity and changes in the kinetic behavior, consistent with experimental data. These results pinpoint to the predictive power of this multiscale viewpoint, which aims to integrate the quantitative kinetic description of large interaction networks typical of system biology approaches with a focus on the quality of few, key, molecular interactions typical of structural biology ones.

Dyslipidemia (Dys) is a disease characterised by abnormally high levels of lipids in the 1 blood. It causes the deposits of lipids on the arterial wall, leading to the insurgence of atherosclerosis, 2 i.e. the increased thickness of arterial walls, which finally increases the risk of cardiovascular diseases. 3 Dyslipidemia is as comorbidity of Type 2 Diabetes Mellitus (T2DM). A set of genes has been associated 4 with dyslipidemia, but examining the regulation of such genes in age and sex is still an open research 5 field. In this study, starting from publicly available databases, we select genes associated with 6 dyslipidemia and we analyse their basal level changes by means of age and sex. Also studying the 7 networks associated to the genes, we identify the rewiring changes showing that there exists a set of 8 genes whose expression changes with age in: artery tibial, artery aorta and blood. Finally, we report 9 about changes associated to gender atributes in the extracted data

During the last 150 years, the trout-culture industry focused on enhancing trout populations by stocking, in response to the growing anglers’ demand and the habitat degradation associated to the rapid urbanization and hydropower development. The industrialized north of Italy, home to the Italian Alpine and subalpine trout populations, is the source of most of the revenues of the national trout-culture industry. Its rapid growth and the massive introduction of non-native interfertile trouts eroded the genetic diversity of native lineages, leading to harsh confrontations between scientists, institutions, and sportfishing associations. We review here the state of art of the taxonomy and distribution of the northern Italian native trouts, presenting both scientific results and historical documentation. We think the only native trouts in this region are Salmo marmoratus, widespread in this region, plus small and fragmented populations of S. ghigii, present only in the Southwestern Alps. We strongly recommend the interruption of stocking of domesticated interfertile non-native trouts in this area, and recommend the adoption of Evolutionary Significant Units for salmonid fishery management. We further propose future research directions for a sustainable approach to the conservation and ecosystem management of the fishery resources and inland waters of northern Italy.

Digital Twin (DT) technology is a pivotal innovation within the built environment industry, facilitating digital transformation through advanced data integration and analytics. DTs have demonstrated significant benefits in building design, construction, and asset management, including optimizing lifecycle energy use, enhancing operational efficiency, enabling predictive maintenance, and improving user adaptability. By integrating real-time data from IoT sensors with advanced analytics, DTs provide dynamic and actionable insights for better decision-making and resource management. Despite these promising benefits, several challenges impede the widespread adoption of DT technology, such as technological integration, data consistency, organisational adaptation, and cybersecurity concerns. Addressing these challenges requires inter-disciplinary collaboration, standardization of data formats, and the development of universal design and development platforms for DTs. This paper provides a comprehensive review of DT definitions, applications, capabilities, and challenges within the Architecture, Engineering, and Construction (AEC) industries. This paper provides important insights for researchers and professionals, helping them gain a more comprehensive and detailed view of DT. The findings also demonstrate the significant impact that DTs can have on this sector, contributing to advancing DT implementations and promoting sustainable and efficient building management practices. Ultimately, DT technology is set to revolutionize the AEC industries by enabling autonomous, data-driven decision-making and optimizing building operations for enhanced productivity and performance.

The EU has planned the phase-out of new vehicles based on internal combustion engines in favour of high efficiency electric cars by 2035 (Fit for 55 package). However, many doubts remain about the effectiveness of this choice for each Country of the Union in terms of CO2 emissions reduction, as each State is characterized by a different carbon intensity related to the production of electricity needed to manufacture and recharge vehicles. This study seeks to explore the Italian case. To this aim, carbon intensities related to the electricity production were calculated considering both the Italian electricity mix production at 2021 and those at 2035, envisaged considering two scenarios based on different introductions of renewable sources (RES). Afterwards, the values obtained were adopted for determining the CO2 emissions related to the whole production process of battery systems in Italy (emissions from mining and refining, scrap materials and final assembly included) by comparing some of the most up-to-date Life-Cycle Assessment (LCA) analysis related to the manufacturing cycle of the batteries. Finally, the results were adopted to calculate the starting carbon debit for A, B, C and M car segments for Mild Hybrid, Full Hybrid and Full Electric powertrains. At the same time, statistical road fuel/electricity consumption data were collected and overall CO2 emissions were calculated for the same vehicles for a defined mileage, so to determine break-even points with respect to the cumulative (i.e., from battery and road) carbon emissions. The results showed that advantages related to electric vehicles are significant only if a low carbon intensity related to electricity production is reached by means of a very high introduction of RES, thus keeping the door open for innovative powertrain technologies (plug-in), if fed with low carbon fuels.

Dementia is a major issue for healthcare systems worldwide, necessitating the development of creative and effective strategies for its management. This paper examines the use of Artificial Intelligence (AI) technologies in caring for and managing people with dementia. AI-driven solutions can improve diagnosis, personalize care, optimize medication management, and reduce the burden on caregivers. This paper discusses the implementation of an AI-based framework for creating videos related to people’s memories to support train-therapy or travel- therapy, a non-pharmacological intervention for Alzheimer’s disease patients

With challenged early detection came the collapse of a school roof, initiating a storm of public mistrust and hundreds of schools under investigation in the United Kingdom. The culprit is a poorly understood material heavily used in the 1950s to mid-1990s, reinforced autoclaved aerated concrete (RAAC). As a lightweight material with excellent insulation, RAAC was mainly used in roof and floor panels in many parts of the world. However, RAAC has a comparatively weak compressive strength, poor reinforcement anchorage, and high permeability and susceptibility to creep. The uniqueness of RAAC properties is exacerbated by poor manufacturing, negligent construction and maintenance as well as structural deviations from original design intent. Current guidance lacks in specifying RAAC management strategies beyond recommendations for periodic surveying. This paper delivers a state-of-the-art review of the material properties and structural performance of RAAC to recommend improved measures characterised by non-destructive testing methods and digital asset management. The reviewed literature targets understanding the influence of variable environmental exposure conditions, reinforcement condition, operational loading variations, structural deficiencies, and ageing, to predict their effect on the mechanism of RAAC failure. The established risk factors of RAAC are examined to inform of feasible response strategies against specific issues encountered in affected RAAC structures such as inadequate bearings, compromised transverse reinforcement, and environmental conditions.

Background: Many clinical conditions are affected by meteorological factors and climate changes. Psychiatric disorders are large contributors to the global disease burden, but the literature on the impact of climate changes on mental health is limited. The aim of this study is to investigate the correlation between rising temperatures and admissions for acute exacerbations of psychiatric disorders. Methods: Data were collected for summer months of years 2013 to 2022. Mean monthly tempera-tures were obtained from the meteorological station of the Department of Physics of the Universi-ty of Turin. Data on patients admitted to the acute psychiatric unit of San Luigi Gonzaga Univer-sity Hospital (Turin, Italy) were extracted from the hospital registry. Linear regression analyses were used to investigate the correlation between temperature and number of admissions. Results: A total of 1600 admissions to our psychiatric ward were recorded. Mean monthly temper-ature and monthly number of admissions were directly correlated (P = 0.0020). The correlation between temperature and admissions was significant for the subgroup of admissions due to Bipo-lar Disorders (BD) (P=0.0011), but not for Schizophrenia (P=0.6070) (SCZ) or Major Depressive Disorder (MDD) (P=0.0588). Conclusions: These results confirm the impact of meteorological factors on mental disorders, and in particular on the course of BD. This provides new insights into etiopathological mechanisms and can contribute to improved follow up and relapse prevention.

As the emission regulations get more and more stringent in the different fields of energy and environmental systems, the electric and fuel cell vehicles (FCV) have attracted growing attention by automakers, governments, and customers. Research and development efforts have been focused on devising novel concepts, low-cost systems, and reliable electric/fuel cell powertrain. In fact, electric and fuel cell vehicles coupled with low-carbon electricity sources offer the potential for reducing greenhouse gas emissions and exposure to tailpipe emissions from personal transportation. In particular, Pedal Assisted Bicycles (PAB) popularity is rising in urban areas due to their low energy consumption and environmental impact. In fact, when electrically moved, they are zero emission vehicles with very low noise emissions, as well. These positive characteristics could be even improved by coupling a PAB with a fuel cell based power generation system, thus increasing the vehicle autonomy without influencing their emissions and consumption performances. In this paper, four types of vehicles are compared from an environmental and accessibility point of view: conventional car, bus, electric PAB and hydrogen fuel cell PAB; for such vehicles, the respective utilization stages are accounted for, i.e. without considering the manufacturing process. The analysis has been carried out comparing different vehicles performance along different routes of an Italian middle-size city, Viterbo, which represents a very good pilot case as its Municipality is adopting many solutions suggested by European Union (EU) through the planning tool called Sustainable Energy Action Plan (SEAP). The comparison is based on an ad-hoc developed mathematical procedure, which includes environmental (greenhouse gas and air pollution emissions), health (pollutants toxicity levels) and accessibility time (waiting times) indicators. According to this analysis, electric and fuel cell PAB exhibit interesting advantages over the other vehicles. However, the global economic efficiency of electric or fuel cell apparatus depends substantially on the exploited source of electrical energy.

Introduction. Anesthesia is widely used in various fields of dentistry to reduce patient discomfort when the treatment would be painful. The dentist may need to infiltrate the anesthetic into multiple locations and this is usually done with the same needle which passes through the soft tissues several times to distribute the anesthetic solution over a larger area. The present study aims to evaluate, through a morphological analysis under a scanning electron microscope (SEM), how the beveled tip of a 30G needle, used to inject anesthetic several times into different areas of the vestibular mucosa, changes. Materials and methods. 30G needles with two different brands were tested, in vivo used for a variable number of sequential injections from 1 to 6 on 192 patients. The specimens were analyzed under SEM observation to evaluate any deformations induced by contact with the vestibular soft tissues. Results. The amount of deformation, measured along the axis parallel to the needle, was proportional to the number of injections. The protrusion of deformations, measured on an axis perpendicular to the needle, were maximum on the needles used 3 times. For the needles used 4,5 and 6 injections, no further increase in deformations was noted. Conclusion. From the data it seems that the tested needles are not produced to withstand multiple injections consequently after the first injection on soft tissues, they undergo a deformation which could increase the risk of injury to the mucosa itself or to nerves and vessels with which they come into contact. It would be advisable to use the single needle for a reduced number of injections.

Recently, polyacetylene (PA) is receiving a renewed scientific attention due to its electrical properties potentially useful for energy applications (e.g., fabrication of electrodes for batteries and supercapacitors) and unique functional characteristics (e.g., flame retardant, oxygen scavenger, EMI-shielding, etc.). This chemical compound can be obtained in form of a polyacetylene-PVOH copolymers simply by chemical dehydration of poly(vinyl alcohol) (PVOH), which is a very common type of polymer, widely used in packaging and other technological areas. This very inexpensive chemical reaction for the large-scale synthesis of PA/polyvinylenes has been investigated by reacting PVOH with fuming sulfuric acid at room temperature. In this process, PVOH, shaped in form of film, is dipped in fuming sulfuric acid (i.e., H₂SO₄ at 95-97%) and, after complete chemical-dehydration, it has been mechanically removed from the liquid phase by using a nylon sieve. The reduction process leads to a substantial PVOH film conversion to PA as it has been proved by infrared spectroscopy (ATR-mode). Indeed, the ATR spectrum of the reaction product included all characteristic absorption bands of PA. The reaction product has been also characterized by UV-Vis spectroscopy in order to evidence the presence in the structure of conjugated carbon-carbon double bonds of various lengths. Differential scanning calorimetry (DSC) and thermogravimetric analysis have been used respectively to investigate the PA solid-state cis-trans isomerization and thermal stability in air and nitrogen, respectively.

Many metabolic processes at the molecular level support both viral attack strategies and human defenses during Covid-19. This knowledge is of vital importance in the design of antiviral drugs. In this study, we extracted 18 articles (2021-2023) from PubMed reporting the discovery of hub-nodes specific for the liver during covid-19, identifying 142 hub-nodes. They are highly connected proteins from which to get deep functional information on viral strategies when used as functional seeds. Therefore, we evaluated the functional and structural significance of each of them to endorse their reliable use as seeds. After filtering, the remaining 111 hubs were used to get by STRING an enriched interactome of 1111 nodes (13,494 interactions). It shows the viral strategy in the liver is to attack the entire cytoplasmic translational system, including ribosomes, to take control of protein bio-synthesis. We used the SARS2-Human-Proteome Interaction Database (33,791 interactions), de-signed by us with BioGRID data to implement a reverse-engineering process that identified human proteins actively interacting with viral proteins. The results show 57% of human liver proteins di-rectly involved in Covid, a strong impairment of the ribosome and spliceosome, an antiviral defense mechanism against cellular stress of the p53 system, and, surprisingly, a viral capacity for multiple protein attacks against single human proteins that reveal underlying evolutionary-topological molecular mechanisms. Viral behavior over time suggests different molecular strategies for different organs.

The growing interest in the use of energy storage systems to improve the performance of tramways has prompted the development of control techniques and optimal storage devices, displacement, and sizing to obtain the maximum profit and reduce the total installation cost. Recently, the rapid diffusion of renewable energy generation from photovoltaic panels has also created a large interest in coupling renewable energy and storage units. This study analyzed the integration of a photovoltaic power plant, supercapacitor energy storage system, and railway power system. Random optimization was used to verify the feasibility of this integration in a real tramway electric system operating in the city of Naples, and the benefits and total cost of this integration were evaluated.

Acquired immunodeficiency syndrome (AIDS) has transitioned from a progressive, fatal disease to a chronic, manageable disease thanks to better defining of antiretroviral therapy, hence contributing to increased life expectancy. In parallel, a growing number of subjects without overt clinical signs of disease but living with chronic HIV infection (people living with HIV, PLWH) are experiencing early cardiovascular disease worldwide. However, a progressive increase in the prevalence of multiple comorbid diseases has been reported as these patients age, including cardiovascular disease (CVD). Cardiovascular mortality can be either directly related to the viral infection, a progressive reduction of response to the antiretroviral therapy, chronic inflammation or lifestyle-related. Cardiovascular ageing represents a relevant issue in the management of HIV-infected patients. Although the exact pathophysiological mechanism that leads PLWH to develop cardiovascular disease is not entirely understood, there is substantial evidence that they accumulate age-related conditions earlier than the general population. Furthermore, since the proportion of PLWH growing older than 50 years has progressively increased, this results in a complex interaction between disease-related pathophysiology and the exposition of a growing burden of cardiovascular risk factors. For this reason, we performed a systematic review of the genes most frequently associated with ageing in HIV-infected subjects, followed by a bioinformatic analysis to explore the biological impact of the genes related to ageing.

The Water-Cooled Lead Lithium (WCLL) Breeding Blanket (BB) is one of the two BB concepts candidate to be selected as driver blanket for the EU-DEMO fusion reactor. In this regards, the development of a sound architecture of the WCLL Central Outboard Blanket (COB) Segment, ensuring the fulfilment of the thermal and structural design requirements, is one of the main goals of the EUROfusion consortium. To this purpose, an exploratory research campaign has been launched to preliminarily investigate the thermo-mechanical performances of the Bottom Cap (BC) region of the WCLL COB segment, because of its peculiarities making its design different from the other regions. The assessment has been carried out considering the nominal BB operating conditions, the Normal Operation (NO) scenario, as well as a steady-state scenario derived from the in-box LOCA accident, the Over-Pressurization (OP) scenario. Starting from the reference geometric layout of the WCLL COB BC region, a first set of analysis has been launched in order to evaluate its structural performances under a previously calculated thermal field and to select potential geometric improvements. Then, the analysis of a more complete BC region has been conducted from both the thermal and structural standpoints, evaluating its structural behaviour in compliance with the RCC-MRx code. Finally, after some iterations and geometric updates, a promising geometric layout of the BC region has been obtained even though some criticalities still persist in the internal Stiffening Plates and First Wall. However, the obtained results clearly showed that the proposed layout is worthy to be further assessed to achieve a robust enough configuration. The work has been performed following a theoretical-numerical approach based on the Finite Element Method (FEM) and adopting the quoted Ansys commercial FEM code.

The spread of high-performance personal computers, frequently equipped with powerful Graphic Processing Units (GPU), raised the interest on a set of techniques able to extract models of electromagnetic phenomena (and devices) directly from available examples of the desired behavior. Such approaches are collectively referred to as Machine Learning (ML). A typical representative ML approach is the so called “Neural Network” (NN). Using such data-driven models allows evaluating the output in a much shorter time when a theoretical model is available, or allows predicting the behavior of the systems and devices when no theoretical model is available. With reference to a simple yet representative benchmark electromagnetic problem, some of the possibilities and the pitfalls of the use of NN for the interpretation of measurements (inverse problem) or to obtain the required measurements (optimal design problem) are discussed. The investigated aspects include the choice of the NN model; the generation of the dataset(s); the selection of hyperparameters (hidden layers, training paradigm). Finally, the capabilities in the handling of ill-posed problems are critically revised.

The ovary is the major determinant of female reproductive health. Ovarian functions are mainly related to the primordial follicle pool, which is gradually loss with aging. Ovarian aging and reproductive dysfunctions share oxidative stress as common underlying mechanism. ROS signaling is essential for normal ovarian processes yet can contribute to various ovarian disorders when disrupted. Therefore, balance in the redox system is crucial for proper ovarian functions. In the present study, by focusing on mRNAs and ncRNAs described in the ovary and taking into account only validated ncRNA interactions, we built up an ovarian antioxidant ceRNA network, namely OvAnOx ceRNA, composed of 5 mRNAs (SOD1, SOD2, CAT, PRDX3, GR), 10 miRNAs and 5 lncRNAs (XIST, FGD5-AS1, MALAT1, NEAT1, SNHG1). Our bioinformatic analysis indicated that the components of the OvAnOx ceRNA not only contribute to antioxidant defence, but are also involved in other ovarian functions. Indeed, antioxidant enzymes encoded by mRNA of OvAnOx ceRNA operate within a regulatory network that impacts ovarian reserve, follicle dynamics, and oocyte maturation in normal and pathological conditions. The OvAnOx ceRNA represents a promising tool to unravel the complex dialogue between redox potential and ovarian signalling pathways involved in reproductive health, aging and diseases.

Background: Permanent tracheostomy because of total laryngectomy surgery entails great conse-quences for the patient regarding respiratory physiopathology such as the filtering, humidifying, and heating function of the air by the nose is lost. The use of special stomal filters can determine adequate protection of the trachea-broncho-pulmonary system with a reduction in respiratory pathologies. In fact, in most cases laryngectomee patients are first cigarette smokers who for this reason already have also respiratory diseases such as chronic obstructive pulmonary disease (COPD). Despite the availability of tracheal filters, multiple times, as reported in the literature, the patient tends to limit their use due to reported breathing difficulties, especially in conditions of intense breathing. Methods: The objective of this clinical study was to evaluate the most suitable stomal filter for the laryngectomee patient during physical activity. The filters studied were an INHEALTH device (Blom-Singer SpeakFree HME); two ATOS devices (Provox® Life™ Energy HME and Provox® Life™ Home HME); and an FAHL device (Laryvox HME Sport). Results: For this purpose, the performances of 31 laryngectomee patients, subjected to medi-um-high physical effort, were analyzed through a standardized pneumological test, the Six Minute Walking Test (6MWT) which involves a sustained walk lasting six minutes, with evaluation , every 60 seconds, heart rate, oxygen saturation and meters travelled; furthermore, it examines two sub-jective indices, namely, the basal and final dyspnea index and the initial and final muscular fatigue index.

: This study was conducted to evaluate the behavior of nitrate, moisture and organic matter in a soil with low agronomic input. The test was conducted on silty-sandy soil, a temporal variability of the variables in the different seasons was observed in the three theses. The theses were observed in parallel twice a week. Nitrates showed an increase during the summer-autumn season with higher values ​​in the thesis containing organic matter, “bare soil” followed by the thesis “fallow” and finally by the “cultivated” (see below in experimental set up). The humidity was higher in the “bare soil” thesis followed by “fallow” and “cultivated” one during the summer, in winter the “cultivated” showed the lowest humidity compared to the other two theses. The organic matter does not show great variability in the seasons but is higher in the “fallow” thesis followed by “bare soil” and “cultivated” one. The Montecarlo test informed us that organic matter and humidity were autocorrelated within 5-7.5 m of distance (10-15 lag) while nitrates even if they seemed to be not autocorrelated with each other and have a cyclical pattern.

This article examines the evolution of bariatric surgery, with a focus on emerging technologies such as robotics and laparoscopy. In the case of gastric bypass, no significant differences have emerged between the two techniques in terms of hospitalization duration, weight loss, weight regain, or 30-day mortality. Robotic surgery, while requiring more time in the operating room, has been associated with lower rates of bleeding, mortality, transfusions, and infections. In revisional bariatric surgery, the robotic approach has shown fewer complications, shorter hospital stays, and a reduced need for conversion to open surgery. In the case of sleeve gastrectomy, robotic procedures have required more time and longer post-operative stays but have recorded lower rates of transfusions and bleeding compared to laparoscopy. However, robotic surgeries have proven to be more costly and potentially more complex in terms of post-operative complications. The review has also addressed the topic of the single anastomosis duodeno-ileal switch (SADIS), finding comparable results between robotic and laparoscopic techniques, although robotic procedures have required more time in the operating room. Robotic technology has proven to be safe and effective, albeit with slightly longer operating times in some cases.

In this work, we experimentally investigate mass and heat transport phenomena in a modular device while converting a solution salinity difference into a temperature difference. Operations occur under fixed total ambient pressure and without mechanical moving parts, thus realizing a fully static conversion. Provided that a constant salinity gradient can be imposed, the proposed device is able to generate a steady cooling capacity. Here, we purposely operate with environmentally benign and easily accessible sodium chloride water solutions only. A numerical model is finally elaborated, validated and used to explore a wider range of possible device configurations and operating conditions.

A huge part of corrosion failures and even of catastrophes takes origin from a trivial mistake in either choice or connection of different materials, as well as from an inaccurate evaluation of the compatibility between materials an environment. The example shown in the present paper summarizes several wrong solutions due to the lack of knowledge of the basic rules of corrosion control. By chance, either the consequences of such mistakes were so precocious that it was possible to find a remedy during the construction, or they were happily so venial as to be tolerated. This paper is third in a series devoted to enhancing the need of a professional corrosion control design for infrastructures.

Smart living, a concept that has gained increasing attention in recent years, revolves around integrating advanced technologies in homes and cities to enhance the quality of life for citizens. Sensing and human action recognition are crucial aspects of this concept. Smart living applications span various domains, such as energy consumption, healthcare, transportation, and education, which greatly benefit from effective human action recognition. This field, originating from computer vision, seeks to recognize human actions and activities using not only visual data but also many other sensor modalities. This paper comprehensively reviews the literature on human action recognition in smart living environments, synthesizing the main contributions, challenges, and future research directions. This review selects five key domains: Sensing Technology, Multimodality, Real-time Processing, Interoperability, and Resource-Constrained Processing, as they encompass the critical aspects required for successfully deploying human action recognition in smart living. These domains highlight the essential role that sensing and human action recognition play in successfully developing and implementing smart living solutions. This paper serves as a valuable resource for researchers and practitioners seeking to explore further and advance the field of human action recognition in smart living.

Non-alcoholic fatty liver disease (NAFLD) affects up to a quarter of the adult population in many developed and developing countries. This spectrum of liver disease ranges from simple steatosis to nonalcoholic steatohepatitis (NASH) and cirrhosis. The incidence of NASH is projected to increase by up to 56% over the next 10 years. There is growing epidemiological evidence that NAFLD has become the fastest growing cause of hepatocellular carcinoma (HCC) in industrialized countries. The annual incidence of HCC varies between patients with NASH cirrhosis and patients with noncirrhotic NAFLD. In this review, NAFLD/NASH-associated HCC will be described, including its epidemiology, risk factors promoting hepatocarcinogenesis, and management of HCC in patients with obesity and associated metabolic comorbidities, including preventive strategies and therapeutic approaches to address this growing problem.

The detection of subtle changes in the pituitary dimensions has relevant implications since this gland is crucial for the endocrine system. In cats, few studies established the cut-offs values of the pituitary gland’s dimensions, but using small and inhomogeneous samples. The aims of this study were: to determine by computed tomography (CT) the pituitary linear dimensions and the pituitary-to-brain (P:B) ratio in a sample of domestic short-haired (DSH) cats; to assess the effects of sex, age and weight on pituitary dimensions; to evaluate the inter- and intra-observer agreement for such measurements. Exclusion criteria were: clinical, laboratory or CT alterations of pituitary gland or brain diseases, fractures of the neurocranium, or diabetes mellitus. Pituitary dimensions and brain area were assessed by two different observers using multiplanar reconstructions and automated segmentation tools. Fifty-one cats were included in the final sample. The intraclass correlation coefficient for intra- and inter-observer reliability showed good/excellent and moderate/good reliability, respectively. No differences between sexes were detected, and negligible correlations were found with age and weight. Findings from the current study provided normal reference values for pituitary height (1.88 – 4.01 mm) and P:B ratio (0.25 – 0.49), useful for assessing abnormally enlarged pituitary gland in DSH cats.

Today, the kennel is considered one of the crucial concerns of the human-animal relationship, since it is very often regarded as animal dump where dogs exile, thus representing a burden on society. Therefore, drawing up strategies for a new “kennel conception”, as an added value for human society, environment, and dogs is still an unmet need. Here, we described the activities of a shelter dog in southern Italy, which faithfully meets criteria aimed at One Health perspective. It normally relies on an initial careful assessment by veterinary behaviorist, in order to guarantee the most suitable life conditions for the animals in the kennels, increase the chances of adoption and enroll them in projects tailored to their predispositions. Accordingly, dogs housed there are normally included in training courses to increase the skills to be used in different human social contexts, like support to the inmates, rescue in the rubble, animal-assisted interventions, as well as zooanthropology educational programs. The main strength for this groundbreaking shelter relies on the environmental protection schedule, where the purposes, employing technically and economically sustainable tools, point towards the continuous improvement and minimization of the environmental impact, promoting joint integrative projects for a sustainable One Health framework.

The outbreak of coronavirus disease-19 (COVID-19) has infected more than 11 million people and has claimed more than 530.000 deaths world-wide. In July 2020, still, there is no specific treatment for disease caused by the novel coronavirus. In the search to curb the global pandemic COVID-19, some eastern and developing countries have approved various treatment with controversial efficacy, among that the use of the antimalarial Hydroxychloroquine (HCQ), so far with inconclusive clinical evidence of effectiveness. On the other hand, computer-based screening suggest that HCQs analog are promising molecules, to impair viral replication in vitro[1]. Therefore, what is emerging from this complex background, is the need to understand molecular mechanism beyond drugs that can be helpful against viral infection for this and future pandemic. The intent of this Brief Report is to highlight: i) the involvement of the Mitogen Activated Protein Kinase (MAPK) cascade in viral infection and ii) the urgent need to have molecular data on the effectiveness of the combination of MAPK inhibitors together with HCQ and HCQs analogs in curbing viral infection. We are convinced that a better understanding of the patterns of elicited molecular mechanisms will be critical for new molecular approaches to this severe disease

Dyslipidemia (Dys) is a disease characterised by abnormally high levels of lipids in the blood. It causes the deposits of lipids on the arterial wall leading to the insurgence of atherosclerosis, i.e. the increased thickness of arterial walls, which finally increases the risk of cardiovascular diseases. Dyslipidemia is a comorbidity of Type 2 Diabetes Mellitus (T2DM). A set of genes has been associated with dyslipidemia, but examining the regulation of such genes in age and sex is still an open research field. In this study, we select from publicly available databases the genes associated with dyslipidemia and analyse changes in the basal level of such genes by age and sex. Moreover, we also distinct differential rewiring of the related gene association network in males and females. Our results show that there exist a set of genes whose expression changes with age in artery tibial, artery aorta and blood. Moreover, there exist significant differences between sex.

Although hundreds of keV in energy gain have already been demonstrated in dielectric laser accelerators (DLAs), there remains challenge in creating structures that can confine electrons for multiple millimeters. We focus here on dual gratings with single sided drive, which have experimentally demonstrated energy modulation numerous times. Using a FTDT simulation to find the fields within various DLA structures and correlating these results with particle tracking simulation, we look at the impact of teeth height and width, as well as gap and offset, on the performance of these structures. We find a tradeoff between electron throughput and acceleration, but that for any given grating geometry there is a gap and offset that will allow some charge acceleration. For our 780 nm laser wavelength, this results in a 1200 nm optimal gap size for most gratings.

Due to the high computational burden and the high nonlinearity of the responses, crashworthiness optimizations are notoriously hard-to-solve challenges. Among various approaches, methods like the Successive Response Surface Method (SRSM) have stood out for their efficiency in enhancing baseline designs within a few iterations. However, these methods have limitations that restrict their application. Their minimum iterative resampling required is often computationally prohibitive. Furthermore, surrogate models are conventionally constructed using Polynomial Response Surface (PRS), a method that is poorly versatile, prone to overfitting, and incapable of quantifying uncertainty. Furthermore, the lack of continuity between successive response surfaces results in suboptimal predictions. This paper introduces the Multi-Fidelity Successive Response Surface (MF-SRS), a Gaussian process-based method, which leverages a nonlinear multi-fidelity approach for more accurate and efficient predictions compared to SRSM. After initial testing on synthetic problems, this method is applied to a real-world crashworthiness task: optimizing a bumper crossmember and crash box system. Results, benchmarked against SRSM and the Gaussian Process Successive Response Surface (GP-SRS) – a single-fidelity Gaussian process-driven extension of SRSM, show that MF-SRS offers distinct advantages. Specifically, it improves upon the specific energy absorbed optimum value achieved by SRSM by 14.1 %, revealing its potential for future applications.

Predicting change from multivariate time series has relevant applications ranging from medical to engineering fields. Multisensory stimulation therapy in patients with dementia aims to change the patient’s behavioral state. For example, patients who exhibit a baseline of agitation may be paced to change their behavioral state to relaxed. This study aims to predict changes in behavioral state from the analysis of the physiological and neurovegetative parameters to support the therapist during the stimulation session. In order to extract valuable indicators for predicting changes, both handcrafted and learned features were evaluated and compared. The handcrafted features were defined starting from the CATCH22 feature collection, while the learned ones were extracted using a Temporal Convolutional Network, and the behavioral state was predicted through Bidirectional Long Short-Term Memory Auto-Encoder, operating jointly. From the comparison with the state-of-the-art, the learned features-based approach exhibits superior performance with accuracy rates of up to 99.42% with a time window of 70 seconds and up to 98.44% with a time window of 10 seconds.

In the current industrial landscape, increasingly pervaded by technological innovations, the adoption of optimized strategies for asset management is becoming a critical key success factor. Among the various strategies available, the “Prognostics and Health Management” strategy is able to support maintenance management decisions more accurately, through continuous monitoring of equipment health and “Remaining Useful Life” forecasting. In the present study, Convolutional Neural Network-based Deep Neural Network techniques are investigated for the Remaining Useful Life prediction of a punch tool, whose degradation is caused by working surface deformations during the machining process. Surface deformation is determined using a 3D scanning sensor capable of returning point clouds with micrometric accuracy during the operation of the punching machine, avoiding both downtime and human intervention. The 3D point clouds thus obtained are transformed into bidimensional image-type maps, i.e., maps of depths and normal vectors, to fully exploit the potential of convolutional neural networks for extracting features. Such maps are then processed by comparing 15 genetically optimized architectures with the transfer learning of 19 pre-trained models, using a classic machine learning approach, i.e., Support Vector Regression, as a benchmark. The achieved results clearly show that, in this specific case, optimized architectures provide performance far superior (MAPE=0.058) to that of transfer learning which, instead, remains at a lower or slightly higher level (MAPE=0.416) than Support Vector Regression (MAPE=0.857).

Continuous in-home monitoring of older adults living alone aims to improve their quality of life and independence, by detecting early signs of illness and functional decline or emergency conditions. To meet requirements for technology acceptance by seniors (unobtrusiveness, non-intrusiveness, privacy-preservation), this study presents and discusses a new smart sensor system for the detection of abnormalities during daily activities, based on ultra-wideband radar providing rich, not privacy-sensitive, information useful for sensing both cardiorespiratory and body movements, regardless of ambient lighting conditions and physical obstructions (through-wall sensing). The radar sensing is a very promising technology, enabling the measurement of vital signs and body movements at a distance, and thus meeting both requirements of unobtrusiveness and accuracy. In particular, impulse-radio ultra-wideband radar has attracted considerable attention in recent years thanks to many properties that make it useful for assisted living purposes. The proposed sensing system, evaluated in meaningful assisted living scenarios by involving 30 participants, exhibited the ability to detect vital signs, to discriminate among dangerous situations and activities of daily living, and to accommodate individual physical characteristics and habits. The reported results show that vital signs can be detected also while carrying out daily activities or after a fall event (post-fall phase), with accuracy varying according to the level of movements, reaching up to 95% and 91% in detecting respiration and heart rates, respectively. Similarly, good results were achieved in fall detection by using the micro-motion signature and unsupervised learning, with sensitivity and specificity greater than 97% and 90%, respectively.

This study introduces numerical advancements in an alternative design for the SPS Beam Dump Facility (BDF) at CERN. The design envisions a high-power operation target made of flowing liquid lead. The BDF is a proposed versatile facility at CERN, intended for both beam-dump-like and fixed-target experiments. The target behavior is assessed, assuming a proton beam with a momentum of 400 GeV/c, a pulse frequency of 1/7.2 Hz, and an average beam power of 355 kW. An evaluation is conducted using various Computational Fluid Dynamics (CFD) codes to analyze the behavior of liquid lead and to predict the thermal stress on the target vessel induced by the pulsed heat source generated by the charged particle beam. The comparison increases the reliability of the results, investigating the dependencies on the CFD modeling approach. The beam is modeled as a volumetric heat source with data coming from beam-lead interaction simulations provided by CERN and obtained with the Monte-Carlo code FLUKA. The velocity field and stress profiles are utilized to enhance the design of the lead loop and verify its viability and safety when operated with a liquid metal target.

The paper proposes a human explainable artificial intelligence approach for mapping the status of environmental phenomena from multisource geo data. It is both knowledge and data driven: it exploits remote sensing expert’s knowledge to define the contributing factors from which partial evidence of the environmental status can be computed. Furthermore, it aggregates the partial evidences to compute a map of the environmental status by adapting to a region of interest through a learning mechanism exploiting Volunteered Geographic Information (VGI), both from in situ observations and photointerpretation. The approach is capable to capture the specificities of local context as well as to cope with the subjectivity and incompleteness of expert’s knowledge. The proposal is exemplified to map the status of standing water areas (i.e. water bodies and river, human driven or natural hazard flooding) by considering satellite data and geotagged observations. Results of the validation experiments were performed in three areas of Northern Italy, characterized by distinct ecosystems. Results of the proposed methodological framework showed better performances than traditional approaches based on single spectral indexes thresholding. The use of expert’s knowledge, possibly imprecise/uncertain and incomplete, the need of few ground truth data for learning, and finally the explainability of learned rules are the distinguishing characteristics of the proposal with respect to traditional machine learning methods.

In numerous instances, the fate of a single cell not only represents its peculiar outcome but also contributes to the overall status of an organism. In turn, cell division cycle and its control strongly influence cell destiny playing a critical role in targeting it towards a specific phenotype. Several factors participate to the control of growth and among them p27 and p57, two proteins modulating various transitions of cell cycle, appear to play key functions. In this review, the major features of p27 and p57 will be described, focusing in particular on their recently identified roles not directly correlated to cell cycle modulation. Then, their possible role as molecular effectors of polyphenols activities are discussed. Polyphenols represent a large family of natural bioactive molecules that have been demonstrated to play promising protective activities against several human diseases. Their use has also been proposed in association with classical therapies for ameliorating their clinical effects and for diminishing their negative side activities. The importance of p27 and p57 in polyphenol cellular effects will be discussed with the aim of identifying novel therapeutic strategies for the treatment of important human diseases, such as cancers, characterized by an altered control of growth.

Lung cancer remains the main cause of global cancer-related deaths. Currently low-dose computed tomography (LD-CT) shows a 20% reduction of mortality. However, its clinical suitability is hindered by cost, radiation, and some false positives. Thus, the discovery non-invasive and less-expensive biomarker is urgent needed. In this scenario, proteins released in biological fluids could be considered interesting biomarkers for their role in cancer development. We conducted a pioneering case-control pilot study aimed at assessing the usefulness of Raf Kinase Inhibitory Protein (RKIP) and its phosphorylated form (pRKIP) as potential early-stage lung cancer biomarkers. Urine and Blood samples of two consecutive and independent cohorts of lung cancer patients and healthy controls were screened by means of a novel experimental ELISA assay designed to evaluate both forms of the biomarker. Although urinary levels of RKIP were not statistically different between the lung cancer group and high-risk healthy group, serum ones instead increased significantly in early stage LC patients and permitted to discriminate LC patients from both low-risk (HS) and high-risk healthy subjects (HR-HS) with an overall 93% accuracy (AUC 0.93) when LC was compared to HS and 74% (AUC 0.73) when it was compared to high-risk group. Of note, the analysis of RKIP/pRKIP ratio also showed a high accuracy (90% - AUC 0.95) in discriminating LC patients from HS and more importantly, it allowed to identify LC patients compared to HR-HS, with a higher accuracy (79% - AUC 0.79) than RKIP alone. We hypothesize that serum RKIP levels may be correlated to the activation of the immune systems against the tumor during the first phases of its development. Our study identified a preliminary, non-invasive, RKIP and pRKIP profile able to discriminate with high specificity and sensitivity the early-stage lung cancer patients from high-risk Healthy Subjects. These results, although preliminary, suggest the utility of measuring RKIP/pRKIP as potential new screening test for lung cancer and provide the basis for future validation studies.

(1) Background: Usually, the majority of patients suffering from vertigo and dizziness can be identified in four major categories: acute spontaneous vertigo, episodic (recurrent) vertigo, recurrent positional vertigo, chronic imbalance. Our purpose is to retrospectively evaluate the main causes of episodic vertigo and to find indications for a reliable clinical suspicion useful for a definitive diagnosis, comparing patients affected by different presenting symptomatology (acute vertigo, recurrent episodic vertigo, and imbalance) (2) Methods: we retrospectively evaluated the clinical records in a population of 249 consecutive patients observed for vertigo in our tertiary referral center in the period 1 January 2019 – 31 January 2020. On the basis of the reported clinical history, patients were divided into three groups: patients with first ever attack of vertigo, patients with recurrent vertigo and dizziness; patients with chronic imbalance. (3) Results: On the basis of the results of the instrumental examination, we arbitrary divided (for each type of symptoms) the patients in a group with a normal vestibular instrumental examination and a group of patients in which the clinical-instrumental evaluation showed some pathological results; a highly significant difference (p: 0.157) was found between recurrent and acute vertigo and between recurrent vertigo and imbalance. (4) Conclusions: patients with recurrent vertigo more frequently exhibit a negative otoneurological examination since they are often examined in the intercritical phase. A precise and in-depth research of the patient's clinical history is the key to suspect or make a diagnosis together with the search for some instrumental or clinical hallmark, especially in cases where the clinical picture does not fully meet the international diagnostic criteria.

Personalized medicine is an aspect of the P4 medicine (predictive, preventive, personalized and participatory) based precisely on the customization of all medical characters of each subject. In personalized medicine, the development of medical treatments and drugs is tailored to the individual characteristics and needs of each subject, according to the study of diseases at different scales from genotype to phenotype scale. To make concrete the goal of personalized medicine, it is necessary to employ high-throughput methodologies such as Next Generation Sequencing (NGS), Genome-Wide Association Studies (GWAS), Mass Spectrometry or Microarrays, that are able to investigate a single disease from a broader perspective. For example, by using genotyping microarrays (e.g. collections of Single Nucleotide Polymorphism - SNP) it is possible to uncover the reasons (i.e. mutation in genes) because a treatment works properly in some patients (for example absence of mutated genes), but it does not work (presence of mutated genes) in others. A side effect of high-throughput methodologies is the massive amount of data produced for each single experiment, that poses several challenges (e.g. high execution time and required memory) to bioinformatic software. Thus a main requirement of modern bioinformatic software is the use of good software engineering methods and efficient programming techniques, able to face those challenges, that include the use of parallel programming and efficient and compact data structures. Thus, to exploit all the potential of this massive amount of data in the short possible time (before that data becomes obsolete), the necessity to develop parallel software tools for efficient data collection and analysis arise. Moreover, due to the heterogeneity of the data produced by the different kinds of experimental platforms, it is necessary to automatize in a comprehensive software pipeline, the various steps that compose a bioinformatic analysis, such as: the preprocessing of raw data to remove noise or corrupted data; the annotation of data with external knowledge (e.g. Gene Ontology), and the integration of molecular data with clinical data. It should be noted that such steps are necessary to make statistical or data mining analysis more effective. This paper presents the design and the experimentation of a comprehensive software pipeline, named microPipe, for the preprocessing, annotation and analysis of microarray-based SNP genotyping data. A case study in pharmacogenomics is presented. The main advantages of using microPipe are: the reduction of errors that may happen when trying to make data compatible among different tools; the possibility to analyze in parallel huge datasets; the easy annotation and integration of data.

A growing area in neurosciences is focused on the modeling and analysis the complex system of connections in neural systems, i.e. the connectome. Here we focus on the representation of connectomes by using graph theory formalisms. The human brain connectomes are usually derived from neuroimages; the analyzed brains are co-registered in the image domain and brought to a common anatomical space. An atlas is then applied in order to define anatomically meaningful regions that will serve as the nodes of the network - this process is referred to as parcellation. Recently, it has been proposed to perform atlas-free random brain parcellation into nodes and align brains in the network space instead of the anatomical image space to define network nodes of individual brain networks. In the network domain, the question of comparison of the structure of networks arises. Such question is tackled by modeling the comparison of brain network as a network alignment (NA) problem. In this paper, we first defined the NA problem formally, then we applied three existing state of the art of multiple alignment algorithms (MNA) on diffusion MRI-derived brain networks and we compared the performances. The results confirm that MNA algorithms may be applied in cases of atlas-free parcellation for a fully network-driven comparison of connectomes.

No data on wild mammals run over along the roads in Osijek-Baranja County, in the north-eastern part of Croatia, have been available so far. Mammals run over from 2016 to 2024 on the Zmajevac-Osijek road, 33.4-km long, were recorded using the road sampling method while travelling back and forth from Zmajevac to Osijek. A total of 86 run-over specimens of wild mammals, classified into eight species and one subspecies, were recorded. The northern white-breasted hedgehog, Erinaceus roumanicus, topped the list with 38 individuals, followed by the European badger, Meles meles, with 23 individuals. Together, these two species amounted to 70.93% of the run-over mammal fauna. Other species and subspecies were recorded in lower numbers. The number of wild mammals run over per kilometer of the observed road section was on the rise from 0.09 to 0.20 in the period from 2016 to 2022, while in 2023 it increased to 0.77 and in 2024 to 0.86. The high proportion of run over wildlife per kilometer is likely due to the high volume of traffic, which disrupts wildlife activities during both day and night.

Transdermal drug delivery systems have become an intriguing research topic in healthcare technology and one of the most frequently developed pharmaceutical products in the global market. In recent years, researchers and pharmaceutical companies have made significant progress in developing new solutions in the field. This study sheds light on current trends, collaboration patterns, research hotspots, and emerging frontiers of transdermal drug delivery. Herein, a bib-liometric and patent analysis of data recovered from Scopus and The Lens databases, respectively, is reported over the last 20 years. From 2000 to 2022, the annual global publications increased from 131 in 2000 to 659 in 2022. Researchers in the United States, China, and India produced the highest number of publications. Likewise, most patent applications have been filed in the USA, China, and Europe. The recovered patents are 7,275, grouped into 2,997 patent families, of which 314 were granted. This study could support the work of decision-makers, scientific managers, or scientists to create new business opportunities or save money, time, and intellectual capital, thus, defining when a research or technology project should be a priority or not.

The connectivity level of last-generation vehicles is constantly on the rise. The combined use of Vehicle-To-Everything (V2X) connectivity and autonomous driving can provide remarkable benefits through the optimization of the route and speed trajectory. In this framework, this paper focuses on vehicle eco-driving optimization in a connected environment. The virtual test rig of a premium segment passenger car was used for generating the simulation scenarios. The benefits, in terms of energy and time savings, that the introduction of V2X communication, integrated with cloud computing, can have in a real-world scenario were assessed. The Reference Scenario is a pre-defined Real Driving Emissions (RDE) compliant route, while the simulation scenarios were generated by assuming two different penetration levels of V2X technologies. The associated energy minimization problem is formulated and solved by means of a global optimization algorithm, i.e., Dynamic Programming (DP). The optimization framework includes information coming from the surrounding environment, e.g., traffic lights state, speed limits, distance to travel, etc. The simulations show that introducing a smart infrastructure along with optimizing the vehicle speed in a real-world route can potentially reduce the required energy by 54% while shortening the travel time by 38%. Finally, a sensitivity analysis is performed on the bi-objective optimization cost function to find a set of Pareto optimal solutions, between energy and travel time minimization.

As a result of decades of austerity, the economies of the Eurozone are experiencing under-investment and crumbling infrastructures in an era of extremely severe emergencies as the cli-mate change and aggressive global competition. The private savings glut of the rich and the strict fiscal rules suggest a crowding-in approach in partnership with big finance in a new age of in-fra-structures. If governments mint public infrastructures into investable assets, they can gen-erate steady returns for investors and asset managers who look after pensions and insurances schemes and unlock trillions now devoted to welfare state. For the big finance to accept to be partner, however, governments must take the task of de-risking returns. Innovation technology and macro-financial literacy can synergically act to enhance this new de-risking role to address in a financially sustainable way the intense phenomena of Natural Hazards (NHs) that can severely compromise economic growth. This is precisely the aim of our Public-Private Partnership (PPP) among the Department of Economics, Management and Institutions of the University of Naples and a Knowledge Transfert Management, the Department of Engineering and the Aca-demic Spin-Off “STRAIN”, of the University of Campania. Our PPP has been contributing to the eval-uation and mitigation of NHs such as floods, landslides and earthquakes since 2012. The ex-tremely advanced results of this multi-stakeholder partnership ensure a better knowledge of NHs which, as evidenced in the paper, is the fundamental input for the desired Public-Private In-surance Programmes (PIPPs).

The availability of new self-sensing cement-based strain sensors allows the development of dense sensor networks for Structural Health Monitoring (SHM) of reinforced concrete structures. These sensors are fabricated by doping cement-matrix materials with conductive fillers, such as Multi Walled Carbon Nanotubes (MWCNTs), and can be embedded into structural elements made of reinforced concrete prior to casting. The strain sensing principle is based on the multifunctional composites outputting a measurable change in their electrical properties when subjected to a deformation. Previous work by the authors was devoted to material fabrication, modeling and applications in SHM. In this paper, we investigate the behavior of several sensors fabricated with and without aggregates and with different MWCNTs content. The strain sensitivity of the sensors, in terms of fractional change in electrical resistivity for unit strain, as well as their linearity are investigated through experimental testing under both static and dynamically varying compressive loadings. Moreover, the responses of the sensors when subjected to destructive compressive tests are evaluated. Overall, the presented results contribute to improving the scientific knowledge on the behavior of smart concrete sensors and to furthering their understanding for SHM applications.

Epigenetic changes regulate gene expression through histone modifications, chromatin remod-eling and proteins interpreter of these modifications. The PRC1 and PRC2 complexes shape gene repression via histone modifications. Specifically, the CBX protein family aids PRC1 recruitment to chromatin, impacting the progressive multistep process driving chromatin silencing. Among family members, CBX3 is a complex protein involved in aberrant epigenetic mechanisms that drive lung cancer progression. CBX3 promotes lung tumorigenesis by interacting with key pathways such as PI3K/AKT, Ras/KRAS, Wnt/β-catenin, MAPK, Notch, and p53, leading to in-creased proliferation, inhibition of apoptosis, and enhanced resistance to therapy. Given our current lack of knowledge, additional research is required to uncover the intricate mechanisms underlying CBX3 activity, as well as its involvement in molecular pathways and its potential biomarker evaluation. Specifically, the dissimilar roles of CBX3 could be reexamined in order to gain a greater insight into lung cancer pathogenesis. This review aims to provide a clear overview of the context-related molecular profile of CBX3, which could be useful for addressing clinical challenges and developing novel targeted therapies based on personalized medicine.

In addition to CD4+ T lymphocytes, myeloid cells, and, particularly, differentiated macrophages, are targets of the human immunodeficiency virus type-1 (HIV-1) infection via interaction of gp120Env with CD4 and CCR5 or CXCR4. Both T cells and macrophages support virus replication although with substantial differences. In contrast to activated CD4+ T lymphocytes, HIV-1 replication in macrophages occurs in nondividing cells and it is characterized by virtual absence of cytopathicity both in vitro and in vivo. These general features should be considered in evaluating the role of cell-associated restriction factors aiming at preventing of curtailing virus replication in macrophages and T cells particularly in the context of designing strategies to tackle the viral reservoir in infected individuals receiving combination antiretroviral therapy. In this regard, we will here also discuss a model of reversible HIV-1 latency in primary human macrophages and the role of host factor determining restriction or reactivation of virus replication in myeloid cells.

Usually, towed hydrophone arrays are instrumented with a set of compasses. Data from these sensors are utilized while beamforming the acoustic signal for target bearing estimation. However, elements of the hydrophone array mounted in the neighborhood of a compass can affect the Earth’s magnetic field detection. The effects depend upon the kind of elements present in the platform hosting the compass. If the disturbances are constant in time, they can be compensated for by means of a magnetic calibration. This process is commonly known as soft and hard iron compensation. In this paper, a solution is presented to carry out the magnetic calibration of a COTS (Commercial Off The Shelf) digital compass without unattainable sensor motion. This approach is particularly suited in applications where a physical rotation of the platform that hosts the sensor is unfeasible. In our case, the platform consists in an assembled and operational towed hydrophone array. A standard calibration process relies on physical rotation of the platform and thus on the use of the geomagnetic field as a reference during the compensation. As a variation on this approach, we provide to the sensor an artificial reference magnetic field to simulate the unfeasible physical rotation. We obtain this by using a tri-axial Helmholtz coil, which enables programmability of the reference magnetic field and assures the required field uniformity. In our work, the simulated geomagnetic field is characterized in terms of its uncertainty. The analysis indicates that our method and experimental set-up represent a suitably accurate approach for the soft and hard iron compensation of the compasses equipped in the hydrophone array under test.

Information and communication technologies (ICT) are increasingly permeating our daily life and we ever more commit our data to the cloud. Events like the COVID-19 pandemic put an exceptional burden upon ICT infrastructures. This involves increasing implementation and use of data centers, which increased energy use and environmental impact. The scope of this work is to take stock on data center impact, opportunities, and assessment. First, we estimate impact entity. Then, we review strategies for efficiency and energy conservation in data centers. Energy use pertain to power distribution, IT-equipment, and non-IT equipment (e.g. cooling): Existing and prospected strategies and initiatives in these sectors are identified. Among key elements are innovative cooling techniques, natural resources, automation, low-power electronics, and equipment with extended thermal limits. Research perspectives are identified and estimates of improvement opportunities are presented. Finally, we present an overview on existing metrics, regulatory framework, and bodies concerned.

Qualtra, an innovative 10 MW geothermal power plant proposal, employs a closed-loop design to mitigate emissions, ensuring no direct release into the atmosphere. A thorough assessment utilizing energy and exergy analysis, Life Cycle Assessment (LCA), Exergo-economic and Exergo Environmental Analysis (EevA) was conducted. The LCA results, utilizing the ReCiPe 2016 midpoint methodology, encompass all the spectrum of environmental indicators provided. The technology implemented makes it possible to totally avoid direct atmospheric emissions from the Qualtra plant, so the environmental impact is mainly due to indirect emissions over the life cycle. The results obtained for the Global Warming Potential indicator is about 6.6 g CO2/kWh, notably lower compared to other conventional systems. Contribution analysis reveals that the construction phase dominates, accounting for over 90% of the impact in all LCA MidPoint categories. At the component level, a single score calculation incorporating normalization and weighting was executed. The resulting single score is then used into Exergo-Environmental Analysis (EEvA), highlighting the well system as the most impactful contributor, constituting approximately 45% of the total impact. Other substantial contributions to the environmental impact include the condenser (21%), the turbine (17%), and the HEGeo (14%). The Exergo-Economic analysis assesses cost distribution across major plant components, projecting an electricity cost of about 8.3 c€/kWh.

With the outbreak of the COVID-19 disease, the research community is producing unprecedented efforts dedicated to better understand and mitigate the affects of the pandemic. In this context, we review the data integration efforts required for accessing and searching genome sequences and metadata of SARS-CoV2, the virus responsible for the COVID-19 disease, which have been deposited into the most important repositories of viral sequences. Organizations that were already present in the virus domain are now dedicating special interest to the emergence of COVID-19 pandemics, by emphasizing specific SARS-CoV2 data and services. At the same time, novel organizations and resources were born in this critical period to serve specifically the purposes of COVID-19 mitigation, while setting the research ground for contrasting possible future pandemics. Accessibility and integration of viral sequence data, possibly in conjunction with the human host genotype and clinical data, are paramount to better understand the COVID-19 disease and mitigate its effects.

Mini-drones can be used for a variety of tasks, such as weather monitoring, package delivery, search and rescue, and recreation. Their uses are mostly restricted to outside locations with access to the Global Positioning System (GPS) and/or similar systems since their usefulness, safety, and performance substantially rely on ubiquitously accurate positioning and navigation. Indoor localization is getting better, thanks to technologies like Visual Simultaneous Localization and Mapping (V-SLAM). However, more advancements are still required for mini-drone navigation applications with greater safety standards. In this research, a novel method for enhancing indoor mini-drone localization performance is proposed. By merging Oriented Rotated Brief SLAM (ORB-SLAM2), Semi-Direct Monocular Visual Odometry (SVO), and an Adaptive Complementary Filter, the suggested strategy improves V-SLAM approaches (ACF). The findings demonstrate that, when compared to other widely-used indoor localization algorithms, the suggested methodology performs better at estimating location under various situations (low light, low texture, and dynamic environments).

Phased injection of natural gas into internal combustion marine engines is a promising solution for optimizing performance and reducing harmful emissions, particularly unburned methane, a potent greenhouse gas. This innovative practice distinguishes itself from continuous injection because it allows for more precise control of the combustion process with only a slight increase in system complexity. By synchronizing the injection of natural gas with the intake and exhaust valve opening and closing times while also considering the gas path in the manifolds, methane release into the atmosphere is significantly reduced, making a substantial contribution to efforts to address climate change. Moreover, phased injection improves the efficiency of marine engines, resulting in reduced overall fuel consumption, lower fuel costs, and increased ship autonomy. This technology has been tested on a single-cylinder, large-bore, four-stroke research engine designed for marine applications, operating in dual-fuel mode with diesel and natural gas. Performance was compared with that of the conventional continuous feeding method. Evaluation of the effect on equivalent CO2 emissions indicates a potential reduction of up to approximately 20%. This reduction effectively brings greenhouse gas emissions below those of the diesel baseline case, especially when injection control is combined with supercharging control to optimize the air-fuel ratio.

This paper proposes an unusual method for the dissemination of geological sciences and the promotion of geotourism: the scientific documentary, where a representative itinerary of geological and geomorphological evolution of this portion of the Apennines was presented. The considerations that led to the identification of the geological route proposed to the editorial staff of FOCUS TV are presented in detail. At each stop there was an explanation by academic professors and researchers, mainly from the Geology Division of the University of Camerino (MC), who explained in detail the outcrops. During the episode, insights were also given into the anthropogenic frequentation of the epigean caves in Frasassi (AN), ancient places of frequentation and worship thanks to their suggestiveness and the sense of sublime that they can elicit. In addition to the illustration of the individual stops, the article offers further insights into the geomorphology of the most important geosites depicted, all of which are in nature parks or protected areas and characterized by a high landscape value. The result was the production of an episode of the television program 'Geological Wonders of Italy: The Marche and Umbria Regions', which was broadcast in October 2022 by the Italian national Mediaset group.

Although many devices have recently been proposed for pressure regulation and energy harvesting in water distribution and transport networks, very few applications are still documented in the scientific literature. A new in-line Banki turbine with positive outflow pressure and a mobile regulating flap, named PRS, was installed and tested in a real water transport network for pressure and discharge regulation. The PRS turbine was directly connected to a 55 kW asynchronous generator with variable rotational velocity, coupled to an inverter. The start-up tests showed how automatic adjustment of the flap position and the impeller velocity variation are able to change the characteristic curve of the PRS according to the flow delivered by the water manager or to the pressure set-point assigned downstream or upstream of the system, still keeping good efficiency values in hydropower production.

Climate change is one of the biggest challenges of our times. Its impact on human populations is not yet completely understood. Many studies have focused on single aspects with contradictory observations. However, climate change is a complex phoenomenon that cannot be adequately addressed from a single discipline's perspective. Hence, we propose a comprehensive conceptual framework on the relationships between climate change and human responses. This framework includes biological, psychological and behavioural aspects, and provides a multidisciplinary overview and critical information for focused interventions. The role of tipping points and regime shifts is explored, and a historical perspective is presented to describe the relationship between climate evolution and socio-cultural crisis. Vulnerability, resilience and adaptation are analyzed from an individual and a community point of view. Finally, emergent behaviours and mass effect phenomena are examined that account for mental maladjustment and conflicts.

The quartz tuning fork used as an acoustic sensor in Quartz-Enhanced Photo-Acoustic Spectroscopy gas detection systems is usually read-out by means of a transimpedance preamplifier, based on a low-noise operational amplifier closed in a feedback loop. The gain-bandwidth product of the operational amplifier used in the circuit is a key parameter which must be properly chosen to guarantee that the circuit works as expected. Here we demonstrate that, if the value of this parameter is not sufficiently large, the response of the preamplifier exhibits a peak at a frequency which does not coincide with the series resonant frequency of the quartz tuning fork. If this peak frequency is selected for modulating the laser bias current and is also used as reference frequency of the lock-in amplifier, a penalty results in terms of signal to noise ratio at the output of the QEPAS sensor. This worsens the performance of the gas sensing system in terms of ultimate detection limits. We show that this happens when the front-end preamplifier of the quartz tuning fork is based on some amplifier models that are typically used for such application, both when the integration time of the lock-in amplifier filter is long, to boost noise rejection, and when it is short, in order to comply with a relevant measurement rate.