This research delves into the epidemiology, clinical manifestations, and management of hyperprolactinemia, particularly focusing on prolactin-secreting pituitary adenomas, or prolactinomas, in Dolj County, a region historically underrepresented in medical literature. Hyperprolactinemia, a prevalent endocrine disorder, arises from excessive prolactin secretion by the pituitary gland's lactotrope cells and presents a diverse clinical picture. The most significant etiological contributors identified are prolactinomas, accounting for approximately 39% of all secretory pituitary tumors. In light of hyperprolactinemia's substantial morbidity and prevalence, this study underscores the necessity of comprehensive understanding of its regional epidemiology and clinical presentations. Our methodology incorporated collecting retrospective data across various medical facilities in Dolj, ensuing a meticulous analysis of clinical features, paraclinical investigation outcomes, and therapeutic responses among patients with prolactinomas. Emphasis was placed on discerning risk factors, demographic characteristics, and associated comorbidities to encapsulate the full spectrum of these tumors' impact within the community. Preliminary results suggest a nuanced incidence rate of prolactinomas within Dolj, with specific demographic and clinical trends potentially distinct from those reported in wider literature. These findings stress the critical role of localized studies in enhancing screening, diagnostic, and therapeutic protocols. Ultimately, this investigation offers critical insights into the epidemiology and symptomatology of prolactinomas in Dolj, significantly augmenting existing literature and informing regional medical practices.

The general desire of the world's population is to eat as healthily as possible, an aspect that has a direct impact on the technological complex aimed at animals raising (proper breeding systems, microclimate factors with implications for the welfare of animals, etc.), as well as on the quality of the finished products that will enter the food supply. Therefore, the authors set out to study how the growth system influences the health status of rainbow trout raised in different systems. The observed experimental factors did not undergo significant changes. However, differences were generated by the applied growth system. For the amount of glucose in the blood, no statistically significant differences were identified between the groups. In contrast, comparison of the amount of glycogen led to obtaining very distinctly significant statistical fluctuations (the mean for P-si was 2.314±0.638 and for P-i 1.980±0.822). Growth hormone varied between 0.504±0.46 in the case of P-si and 0.694±0.22 ng/ml for P-i. The values obtained for cortisol showed a significant influence of stress factors on the studied trout. The general conclusion of the present study is that various technological factors influence the health status of livestock.

This article investigates robust optimality and duality for a class of nonsmooth multiobjective programming problems with vanishing constraints under data uncertainty (in short, UNMPVC) via convexificators. Using the properties of convexificators, we introduce generalized standard Abadie constraint qualification (in short, GS-ACQ) for the considered problem UNMPVC. Moreover, we introduce generalized robust version of nonsmooth stationary conditions, namely, weakly stationary point (in short, RW-Stationary), T-stationary point (in short, RT-Stationary), M-stationary point (in short, RM-Stationary) and S-stationary point (in short, RS-Stationary) for UNMPVC. By employing GS-ACQ, we establish that the RS-Stationary is the necessary first-order optimality condition for a local Pareto solution of UNMPVC. Moreover, under generalized convexity assumptions, we establish sufficient optimality criteria for UNMPVC. Furthermore, we formulate the Wolfe-type (in short, WRD) and Mond-Weir-type (in short, MWRD) robust dual models corresponding to the primal problem UNMPVC.

Although a slightly radioactive element, thorium is considered very toxic because its various species, which reach the environment, can constitute an important problem for the health of the population. The present paper aims to expand the possibilities of using membrane processes in the removal, recovery and recycling of thorium from industrial residues reaching the municipal waste processing platforms. The paper includes a short introduction on the interest shown for this element, a weak radioactive metal, followed by highlighting of some common (domestic) uses. In a distinct but concise part, the bio-medical impact of thorium is presented. The classic technologies for obtaining thorium are concentrated in a single schema, and then the speciation of thorium is presented with an emphasis on the formation of hydroxo-complexes and complexes with common organic reagents. The determination of thorium has been highlighted both on the basis of its radioactivity, but especially through methods that call for extraction followed by an established electrochemical, spectral or chromatographic method. Membrane processes are presented based on the electrochemical potential difference, rapidly presenting barro-membrane processes, electrodialysis, liquid membranes and hybrid processes. A separate sub-chapter is devoted to proposals and recommendations for the use of membranes in order to achieve some progress in urban mining for the valorization of thorium.

The study's objective was to investigate changes in the fatty acid composition of cow milk in general and in 80 Romanian Spotted cows' husbandry and feeding systems in particular (grazing – GC group vs. stabulation – SC group). The ultimate objective was to determine if the changes that happened in the milk also transferred to the finished product. Also, the influence of the raw milk quality produced by both systems was evaluated when yogurt was made from it. The milk was gathered in May, July, and September and used for both the yogurt-making process and the study, which lasted from May to October. As comparison to milk from SC, milk from grazed caws had larger percentages of fat and dry matter throughout the summer (GC) season. Moreover, pasture-based rations (MGC) contained more PUFA than MCS did. Data research revealed that not only do factors like milk origin and initial quality have a substantial impact on yogurt quality parameters, but also technologies like milk fermentation have a considerable impact on the fatty acid profile of yogurt. As comparison to cows kept permanently in stables, grazed cows (MGC) had fat with a lower concentration of saturated fatty acids and a higher proportion of rumenic, vaccenic, and oleic acids (MSC). When fresh milk is processed into yogurt and other dairy products, the fatty acid profiles alter, with saturated fatty acids predominating over unsaturated ones. The findings show that pasture-fed cows have a positive impact on milk quality, particularly in terms of fatty acid profile, as well as on yogurt's ultimate nutritional and dietary quality.

This study investigates the comparative performance of autoencoders and traditional machine learning (ML) algorithms in predicting tumor dynamics following Gamma Knife radiosurgery (GKRS) for brain metastases (BMs). The research retrospectively analyzed clinical data from 77 patients (median age: 64 years; 45 males, 32 females) treated at the “Prof. Dr. NicolaeOblu” Emergency Clinic Hospital-Iasi. The dataset comprised 12 variables, including socio-demographic, clinical, treatment, and radiosurgery-related factors. The primary outcome was tumor progression or regression within three months post-GKRS, with 71 cases of regression and 6 cases of progression observed. Traditional ML models—Logistic Regression, Support Vector Machine (SVM), K-Nearest Neighbors (KNN), Extra Trees, Random Forest, and XGBoost—were evaluated, achieving accuracy rates ranging from 0.91 (KNN) to 1.00 (Extra Trees). When incorporating features extracted by autoencoders, the performance of these models generally improved, especially with compression in the bottleneck layer. For instance, Logistic Regression's accuracy increased from 0.91 to 0.94, while SVM's accuracy improved significantly from 0.85 to 0.96. XGBoost consistently performed well across both traditional and hybrid setups, maintaining an accuracy of 0.94 with an AUC of 0.98. The findings suggest that hybrid approaches combining deep learning with traditional ML techniques can significantly enhance predictive accuracy and robustness, particularly in the context of GKRS for BMs. This improved performance has potential implications for more informed clinical decision-making in personalized medicine.

The target area of the present study is the entrance to the Sulina channel in the Black Sea, the zero-kilometer of the Danube River. This represents the southern gate of the seventh Pan-European transport corridor and is subjected to high navigation traffic. The coastal environment at the Danube’s mouth is very often subjected to strong environmental conditions inducing high risks for navigation hazards. From this perspective, the objective of the present work is to provide a more comprehensive picture concerning the past and future expected dynamics of the environmental matrix in this area, including especially wind and wave conditions. An analysis of some in situ measurements performed at the zero kilometer of the Danube is first carried out for the 15 years 2009-2023. A second analysis is based on data provided by regional climate wind models. Two 30-year periods are considered, the recent past (1976-2005), when also comparisons with ERA5 reanalysis data were performed, and the near future (2041-2070), when two different models and three climate scenarios were considered. Finally, using as a forcing factor each of the wind fields before analyzed, simulations with a spectral wave model were carried out and the nearshore wave conditions were evaluated. The results show that both extreme wind and wave conditions are expected to be slightly enhanced in the future. Strong wind fields are characteristic in this area, with wind gusts exceeding on average with more than 70% the maximum hourly averaged wind speed. As regards the waves, due to the complex nearshore phenomena, considerable enhancements in terms of significant wave heights are induced. Furthermore, there is also a high risk of rogue wave’s occurrence.

Floating wind is becoming an essential part in terms of renewable energy. Therefore, highlighting the perspectives in developing the floating wind platforms is very important. In this paper, we focus on floating wind concepts and projects around the world. This will give a taste to the reader about what is going on in terms of the projects around the world. The main aim of this work is to further explain the collected data regarding the floating wind concepts and projects, and further classify them in terms of cost, power capacity, wind speed, water depth, and distance to shore.

Hydrodynamic modeling and hazard mapping are essential tools for urban flood mitigation and spatial planning. Leveraging software like HEC-RAS (Hydrologic Engineering Center - River Analysis System) and ArcGIS, this study aimed to map flood-prone areas along the Jijia River in the Ungheni administrative unit of Iasi County. Human-induced environmental changes and global climate shifts have heightened flood risks worldwide, particularly in urbanized areas. Hydrological and hydraulic modeling anticipate and assess flood events, while hydrodynamic modeling accurately simulates flow propagation, in-forming flood extent, timing, and volume. Flood hazard maps offer essential insights into flooded areas, water depths, and velocities, assisting in risk assessment and mitigation strategies. Through the use of different scenarios, river modeling aims to accurately replicate real-world conditions. This study focuses on Ungheni commune in Iasi County, Romania, situated along the Prut River's eastern bank. Utilizing a combination of fixed-grid and irregular mesh elements in modeling al-lows for fine-tuning of flow details and optimization of simulation times. Model accuracy, particularly regarding peak river levels, hinges on hydrograph duration. While a 30-minute error is typically accepted, greater tolerances may apply to river basins with longer response times. The extraction and processing of model results, including maximum water depths, flood extents, and velocity maps, are facilitated by ArcGIS, providing valuable data for effective flood management strategies.

The increasing importance of hydropower generation has led to the development of new smart technologies and the need for reliable and efficient equipment in this field. As long as hydropower power plants are more complex to build up than other power plants, the operation regimes and maintenance activities become essential for the hydropower companies to optimize their performance, such that including the data-driven approaches in the decision-making process represents a challenge. In the paper, a comprehensive and multi-task framework integrated into a Knowledge Discovery module based on Data Mining to support the decisions of the operators from the control rooms and facilitate the transition from the classical to smart Supervisory Control and Data Acquisition (SCADA) system in hydropower plants has been designed, developed, and tested. It integrates tasks related to detecting the outliers through advanced statistical procedures, identifying the operating regimes through the patterns associated with typical operating profiles, and developing strategies for loading the generation units that consider the number of operating hours and minimize the water amount used to satisfy the power required by the system. The proposed framework has been tested using the SCADA system's database of a hydropower plant belonging to the Romanian HydroPower Company. The framework can offer the operators from the control room comparative information for a time horizon longer than one year. The tests demonstrated the utility of a Knowledge Discovery module to ensure the transition toward smart SCADA systems that will help the decision-makers improve the management of the hydropower plants.

The steady-state multiplicity of the porous, non-isothermal, catalyst pellet when two parallel and consecutive chemical reactions take place was analysed in this work. The geometry selected for the catalyst pellet is finite hollow cylinder. A numerical multigrid continuation technique with the preconditioned conjugate gradient squared as coarse grid solver was used. The continuation parameter is the dimensionless adiabatic heat rise (Prater number) for the first chemical reaction. The effect of the other governing parameters was analysed and the results are compared to those provided by the single chemical reaction.

The steady-state, coupled heat and mass transfer from a fluid flow to a sphere accompanied by an exothermal catalytic chemical reaction on the surface of the sphere is analysed taking into consideration the effect of thermal radiation. The flow past the sphere is considered steady, laminar and incompressible. The radiative transfer is modeled by P₀ and P₁ approximations. The mathematical model equations were discretized by the finite difference method. The discrete equations were solved by the defect correction – multigrid method. The influence of thermal radiation on the sphere surface temperature, concentration and reaction rate was analysed for three parameter sets of the dimensionless reaction parameters. The numerical results show that only for very small values of the Prater number the effect of thermal radiation on the surface reaction is not significant.

The construction industry is a key driver of environmental change due to its extensive ‎use of resources and high levels of emissions, thus placing a significant burden on global ‎efforts towards sustainable development targets. A large portion of the environmental ‎footprint of buildings results from the energy required to sustain indoor comfort levels. ‎Therefore, enhancing the energy efficiency of existing buildings becomes critical in ‎reducing their environmental impact. This study examines the influence of increasing ‎thermal performance with the aim of reducing heating ‎demand. Thus, numerical modelling tools and different energy performance assessment meth-odologies have been used. ‎Specifically, it evaluates two existing residential buildings in Romania and compares ‎heating demand predictions using PHPP and Mc001-2022 methodologies across various ‎climatic data sets and case studies. The results reveal significant variability in heating ‎demand predictions, emphasizing the importance of methodological choice and climatic ‎data. The ‎study highlights that both PHPP and Mc001-2022 methodologies yield varying results ‎depending on the specific conditions and characteristics of each building. This variation in results underscores ‎the necessity for a nuanced and context-specific approach to energy performance ‎assessment, in-corporating multiple energy efficiency measures tailored to the unique ‎features of each building.

The splitting method developed in a previous study for linear, multi – component, convection-diffusion mass transfer equations is extended to non-linear, multi-component, convection-diffusion mass transfer equations. The diffusion term is non-linear (the diffusion coefficients depend on chemical species concentrations). Theoretical results about the splitting error are presented, as well as numerical simulations for mixtures with n ≤ 5. The numerical experiments show second-order accuracy and stability for the present splitting algorithm.

Daylighting design is not only a stage of dimensioning glazed surfaces to provide sufficient natural light to an occupied space, but also a method of analysing how this matter can be achieved without unwanted effects, such as: gains and losses of heat, glare, and variations of the daylighting intensity, at various indoor distances and levels. According to the international regulations in force, glazed surfaces must be designed with a careful balance between the admission of natural light and thermal performance, such as heat loss in winter and heat gain in summer. In a novel project, it is essential to determine the optimal ratio of window-to-wall surface area. This necessity arises because the materials constituting the glazed surfaces of windows typically exhibit lower insulation properties compared to those of the building's walls. This methodology could be applied to building renovations when envelope modifications are possible and suitable. The case study presented in the paper highlights the energy consumed due to a group of windows with a large glazed area in an existing building, located in a temperate continental climate area. The energy consumption results from supplementary artificial lighting required to maintain adequate illumination for indoor activities and that to counterbalance heat loss during colder periods are evaluated. The analysis performed by modifying the glazed surface led to the identification of an optimum value of windows dimensions for an energy consumed minimum.

Following the international trend of using hydrogen as combustible in many industry branches, this paper investigates the impact of mixing methane gas with 23% hydrogen (G222) on condensing boilers’ operation. After modeling and testing several boilers with heat exchange surface different designs, the authors gathered enough information to introduce a new concept, namely High-Performance Condensing Boiler (HPCB). All the boilers that fit into this approach have the same operational parameters at nominal heat load, including the CO2 concentrations in flue gases. After testing a flattened pipes condensing boiler, a CO2 emission reduction coefficient of 1.1 was determined, when converting from methane gas to G222 as combustible. Thus, by inserting into the national grid a G222 mixture, an important reduction in greenhouse gases can be achieved. For a 28 kW condensing boiler the annual reduction in CO2 emissions averages 1.26 tons, value which was experimentally obtained and is consistent with the theoretical evaluation.

The informational synthesis of neural structures, processes, parameters and characteristics that allow a unified description and modeling as neural machines of natural and artificial neural systems is presented. The general informational parameters as the global quantitative measure of the neural systems computing potential as absolute and relative neural power were proposed. Neural information organizing and processing follows the way in which nature manages neural information by developing functions, functionalities and circuits related to different internal or peripheral components and also to the whole system through a non-deterministic memorization, fragmentation and aggregation of afferent and efferent information, deep neural information processing representing multiple alternations of fragmentation and aggregation stages. The relevant neural characteristics were integrated into a neural machine type model that incorporates unitary also peripheral or interface components as the central ones. The proposed approach allows overcoming the technical constraints in artificial computational implementations of neural information processes and also provides a more relevant description of natural ones.

The numerical implementation of the controllers allows the use of very complex algorithms with ease. However, in practice, due to its proven advantages, the PID controller (and its variants) is widely used in industrial control systems as well as in many other applications that require continuous control. Most of the methods for tuning the parameters of PID controllers are based on time-invariant linear models of the processes, which in practice can lead to poor performance of the control system. The paper presents an application of reinforcement learning algorithms in tuning of PID controllers for the control of some classes of continuous nonlinear systems. Tuning the parameters of PID controllers is done with the help of Twin Delayed Deep Deterministic Policy Gradients (TD3) algorithm which presents a series of advantages compared to other similar methods from Machine Learning dedicated to continuous state and action spaces. TD3 algorithm is an off-policy Actor-Critic based method and was used as it does not require a system model. The presented technique is applied for control of a biotechnological system which has a strongly nonlinear dynamic. The proposed tuning method is compared to the classical tuning methods of PID controllers. The performance of the tuning method based on the TD3 algorithm is demonstrated through simulation illustrating the effectiveness of the proposed methodology.

This paper experimentally reveals some of the resources offered by the evolution of the instantaneous active electric power in describing the state of three-phase AC induction asynchronous electric motors (with squirrel-cage rotor) operating under no-load conditions. A mechanical power is required to rotate the rotor at no-load and this mechanical power is satisfactorily reflected in the constant and variable part of instantaneous active electric power. The variable part of this electrical power should necessarily have a periodic component with the same period as the period of rotation of the rotor. The paper proposes a procedure for extracting this periodic component description (as a pattern, by means of a selective averaging of instantaneous active electrical power) and analysis. The time origin of this pattern is defined by the time of a selected first passage through the origin of an angular marker placed on the rotor, detectable by a proximity sensor (e.g. a laser sensor). The usefulness of the pattern in describing the state of the motor rotor has been demonstrated by several simple experiments which show that a slight change in the no-load running conditions of the motor (e.g. by placing a dynamically unbalanced mass on the rotor) has clear effects in changing the shape of the pattern.

This work introduces a neuromorphic sensor based on force-sensing resistors (FSR) and spiking neurons for robotic systems. The proposed sensor integrates the FSR in the schematic of spiking neuron in order to make the sensor to generate spikes with frequency that depends on the applied force. The performance of the proposed sensor is evaluated for the control of a SMA-actuated ro-botic finger by monitoring the force during steady state when the finger pushes on a tweezers. For comparison purposes, we performed similar evaluation when the SNN receives input from a widely used compression load cell (CLC). The results show that the proposed FSR based neuro-morphic sensor has very good sensitivity to low forces and the function between the spiking rate and the applied force is continuous with good variation range. However, when compared to the CLC, the proposed sensor has lower linearity of the response, but it benefits from two orders of magnitude lower power consumption. These aspects imply that the neuromorphic sensor based on FSR are useful for bioinspired control of humanoid robotics representing a low power and low cost alternative the widely used sensors.

The effect of thermal radiation on the two – dimensional, steady-state, conjugate heat transfer from a circular cylinder with an internal heat source in steady laminar crossflow is investigated in this work. P₀ (Rosseland) and P₁ approximations were used to model the radiative transfer. The mathematical model equations were solved numerically. Qualitatively, P₀ and P₁ approximations show the same effect of thermal radiation on conjugate heat transfer; the increase in the radiation – conduction parameter decreases the cylinder surface temperature and increases the heat transfer rate. Quantitatively, there are significant differences between the results provided by the two approximations.

The Roma population constitutes the largest ethnic minority in Europe, however, data regarding the prevalence of non- communicable diseases are still scarce in the medical literature. The aim of this study was to assess the clinical and metabolic particularities of a Roma population with diabetes, in comparison with a group of Romanian Caucasians. We conducted an observational, transversal study and evaluated 808 adult patients with diabetes mellitus, from a tertiary hospital providing diabetes care, aged between 18 and 89 years old, of whom the majority were men (52.84%). Most of them had type 2 diabetes mellitus (T2DM), reaching 95.1% the Caucasian group and 87.8% among the Roma patients. 81.1% of the Caucasian patients had hypertension, approximately 15% higher than the Roma group, while more than half of the patients in both groups had obesity. There were no differences concerning myocardial infarction, however, the number of patients with history of stroke was 2.1 times higher in the Roma group compared to Caucasians. Chronic kidney disease was present in 22.1% of the Roma patients, 33.25% had retinopathy, and 72.7% presented polyneuropathy. The prevalence of cardiovascular risk factors, cardiovascular disease and microvascular complications among the study Roma population are quite significant, underscoring the importance of ethnic disparities in approaching healthcare management strategies.

Cardiac autonomic neuropathy (CAN) is a severe complication of diabetes mellitus (DM) strongly linked to a nearly five-fold higher risk of cardiovascular mortality. Patients with Type 2 Diabetes Mellitus (T2DM) are a significant cohort in which these assessments have particular relevance to the increased cardiovascular risk inherent in the condition. This study aimed to explore the subtle correlation between the Ewing test, Sudoscan-cardiovascular autonomic neuropathy score, and cardiovascular risk calculated using SCORE 2 Diabetes in individuals with T2DM. The cohort consisted of 211 patients diagnosed with T2DM with overweight or obesity without established ASCVD, aged between 40 to 69 years. The prevalence of CAN in our group was 67.2%. In the study group, according SCORE2-Diabetes, four patients (1.9%) were classified with moderate cardiovascular risk, thirty-five (16.6%) with high risk, and one hundred seventy-two (81.5%) with very high cardiovascular risk. On multiple linear regression, the SCORE2-Diabetes algorithm remained significantly associated with Sudoscan CAN-score and Sudoscan Nephro-score and Ewing test score. Testing for the diagnosis of CAN in very high-risk patients should be performed because approximately 70% of them associate CAN. Increased cardiovascular risk is associated with sudomotor damage and that Sudoscan is an effective and non-invasive measure of identifying such risk.

Some optimal control problems need metaheuristics in searching for the optimal solution, especially when the process has certain characteristics like the Photobioreactor for Algae Growth (distributed parameter, nonlinearities, etc.). Particle Swarm Optimization (PSO) algorithms within control structures are a realistic approach; their task is often to predict the optimal control values working with a process model (PM). Owing to numerous numerical integrations, there is a big computational effort that is reflected in a large controller execution time. The authors propose to replace the PSO predictor with a machine learning model that has “learned” the quasi-optimal behavior of the couple (PSO, PM); the training data is obtained through closed-loop simulations over the control horizon. The new controller should preserve the process’s quasi-optimal control. In identical conditions, the process evolutions must also be quasi-optimal. The multiple Linear Regression and the Regression Neural Networks were considered as predicting models. The paper first proposes algorithms for collecting and aggregating data sets for the learning process. Algorithms for constructing the machine learning models, implementing the controllers, and closed-loop simulations are also proposed. The simulations prove that the two machine learning predictors have learned the PSO predictor’s behavior such that the process evolves almost identically. The resulting controllers’ execution time drastically decreased while keeping their optimality.

The paper presents a new vision on the energy consumption management in the case of the Small and Medium Enterprises (SMEs), integrated into an advanced decision support platform, with technical and economic benefits on increasing the energy efficiency, which contains modules for database management, profiling, forecasting, and production scheduling. Inside each module, Artificial Intelligence and Data Mining techniques were proposed to remove the uncertainties regarding the dynamic of technological flows. Thus, the data management module includes the Data Mining techniques, that extract the technical details on the energy consumption needed in the development of production scheduling strategies, the profiling module uses an original approach based on clustering techniques to determine the typical energy consumption profiles required in the optimal planning of the activities, the forecasting module contains a new approach based on an expert system to forecast the total energy consumption of the SMEs, and production scheduling module integrates a heuristic optimization method to obtain the optimal solutions in flattening the energy consumption profile. The testing was done for a small enterprise from Romania, belonging to the domain of trade and repair of vehicles. The obtained results highlighted the advantages of the proposed decision support platform on the decrease in the intensity of energy consumption per unit of product, reduction of the purchase costs, and modification of the impact whom the energy bills have on the operational costs.

In the paper, an improved smart meter data-based three-stage algorithm to calculate the power/energy losses in the three-phase networks with the voltage level below 0.4 kV (low voltage - LV) is presented. In the first stage, a loading function of input data was built having as main feature the working at the same time with files from the database of smart metering system (SMS) containing the hourly electricity records, and files including the characteristic load profiles established by the Distribution Network Operator (DNO) for the consumers with standard energy meters depending the following factors: consumption class, day and season. In the second stage, a function which is based on the work with the structure vectors was implemented to identify easy the configuration of analysed networks. In the third stage, an improved version of forward/backward sweep-based algorithm was proposed to calculate fast the power/energy losses to three-phase LV distribution networks in balanced and unbalanced regime. A real LV rural distribution network from a pilot zone belonging to a Distribution Network Operator (DNO) from Romania was used to confirm the accuracy of the proposed approach. The comparison with the results obtained using the DigSilent PowerFactory Simulation Package certified the performance of the algorithm, the mean absolute percentage error (MAPE) being 0.94%.

Wearable exoskeleton solutions for upper limb rehabilitation or assistance, particularly for the hand area, have become increasingly attractive to researchers, proving to be effective over time in treating hand movement impairments following various neurological diseases. In the present work, the development of a wearable exoskeleton-type device for active hand rehabilitation has been addressed, based on fluid actuators made of elastomeric material and on myoelectric control by capturing myoelectric signals from the forearm area. The flexion movement of the fingers (phalanges) is actively assisted by pneumatic actuation of the built-in actuators and the extension movement is assisted by a depressurization control of the actuator. The device has been designed to be as easy to use as possible, light in weight, and to provide a high degree of comfort when used by the patient for rehabilitation training or daily life activities (ADL), which can be performed in the comfort of one's own home.

Precision agriculture including camera-guided row detection and hydraulic steering are often used as an alternative because crop damage can be decreased and driving speed can be increased comparable to herbicide applications.The effects of different approaches as uncontrolled (UC), mechanical weed control (MWC), herbicide weed control (HWC) and mechanical + herbicide control (MWC+HWC) on weed density and yield of sugar beet were tested and evaluated in two trials (2021 and 2022) in South Transylvania at the tested intervals BBCH 19 and 31. Weed control efficacy (WCE) depends on the emergence of the weeds and a good timing of weed controls in all the trials and methods, though the highest yield of sugar beet roots was recorded in the treatment MWC+HWC, with an increase up to 12-15% (56.48 t ha-1) yield from HWC (50.22 t ha-1) and a yield increase of more than 35- 40% than MWC (42.34 t ha-1). Our trials show that is possible to increase yield and have less chemical applications with the introduction of the new precision technologies in agriculture included here the sensor-guided mechanical controls.

The discharge of industrial effluents containing toxic heavy metals in water sources has serious consequences for human health and the environment, and biosorption appears to be an environmental-friendly and cost-effective alternative that can be used for wastewater treatment. The use of different types of agricultural waste as biosorbents for the removal of toxic heavy metals, although an alternative, is quite difficult to apply in practice because these wastes have many other uses. Based on these considerations, in this study, soybean biomass (SB), soybean waste biomass obtained from oil extraction (SBW) and biochar obtained from soybean waste pyrolysis (BC-SBW) were testes as biosorbents form the removal of Pb(II) and Cd(II) ions, in batch systems. Under optimal conditions (pH = 5.4, 4.0 g biosorbent/L, room temperature (25 ± 1 C), contact time = 180 min), the biosorption capacity increase in the order: SB < SBW < BC-SBW for both metal ions, indicating that BC-SBW has the highest efficiency in removing toxic heavy metals. In addition, experiments on wastewater samples have shown that, in addition to significant reducing the content of heavy metals, BC-SBW also significant improved other quality indicators (such as: pH, TSM, CCO-Cr, CBO5), compared to the other biosorbents (SB and SBW). Quantitative evaluation of the biosorptive performance of each biosorbent (SB, SBW and BC-SBW) shows that BC-SBW has a real chance of being used on an industrial scale for wastewater treatment. All these aspects allowed the development of a circular approach for the use of soybean biomass in the removal processes of toxic heavy metals. This approach minimizes the shortcomings of using biomass as a biosorbent and increase the chance of using these materials in industrial practice.

Sandblasting materials used for dental restoration is a valuable preconditioning technique enhancing the physical properties and promotes osseointegration and cell adhesion. Ti medical grade 4 and Ti6Al4V were blasted with a series of various naturally occurring and synthetically produced spraying materials of controlled granulometry, at precise spraying duration and spraying pressure, and the results were analyzed in terms of the obtained surface roughness and by SEM analysis. It was found that in all cases, regardless of the spraying material or working conditions, the roughness profile achieved is a uniformly distributed one. A reduction in the blasting pressure by half led to a decrease in the roughness between 30 and 35%. The use of glass balls as blasting material led to decreased roughness and a more uniformly distributed roughness values for Ti as well as for Ti6Al4V regardless of spraying duration or applied pressure comparing to other spraying materials, and blasting with olivine led to increased, as well as uniformly distributed values, and hence the conclusion that one may control the roughness size by choosing one or another from the above materials, without the need of changing any other operating parameters. In the case of Ti, the achieved roughness is greater than in the case of Ti4Al6V, irrelevant of the blasting material, the differences being smaller the softer the sandblasting material due to the fact that Ti alloys have better mechanical properties and increased hardness comparing to pure Ti. SEM analysis showed that the use of sintered hydroxyapatite as an additive to the blasting material does not necessarily lead to a substantial deposition of hydroxyapatite on the substrate materials, only traces of it being identified during the analysis.

Nowadays, in low voltage (LV) electric distribution networks (EDNs), the Distribution Network Operators (DNOs) are encountering a high number of connected small-scale distributed generation units, mainly photovoltaic (PV) prosumers. The irregular behavior of the prosumers, together with the uncertainty degree of the requested and injected powers associated with all end-users from the LV EDN, can cause voltage variations with violations of the allowable limits. In this context, the paper developed an efficient and resilient expert system integrating the rule-based reasoning applied to the On-load Tap Changer (OLTC)-fitted transformer to improve the efficiency of the voltage control in the PV-rich LV EDNs. An in-depth analysis based on 75 scenarios, resulting from the combinations of three indicators: the penetration degree of the PV prosumers, consumption evolution associated with the consumers, and energy production of the PV systems, has been performed to demonstrate the efficiency of the proposed expert system in an LV EDN from a rural area belonging to a Romanian DNO. The success rate of the expert system has been 86.7% (65 out of 75 scenarios didn't have voltage issues, all values being between the allowable limits in 100% of the time slots associated with the analyzed period). For the other scenarios (representing 13.3%), the values have been inside the range [-10%, +10%] at least 95% of the time slots, according to the European Power Quality Standard, and for the rest of the time slots up to 100% being very close to the upper and lower limits of the range, with highly mitigating of the voltage variations.

This paper delves into the multifaceted domain of the aerospace industry, examining its evolution, current challenges, and imperative focus on quality management and process integration. The aerospace sector, driven by technological advancements and a burgeoning global demand for air travel and freight transport, necessitates a thorough analysis of its industrial fabric and operational intricacies. This research endeavors to analyze the dynamics of the aerospace industry, pinpoint its challenges, and propose an integrated approach to enhance efficiency, quality, and sustainability. The primary goals encompass understanding the evolving industry landscape, identifying critical challenges, and offering innovative solutions by amalgamating principles of Industry 4.0 into quality management and processes within the aerospace sector. Through an in-depth exploration of various facets, this research underscores the pivotal role of efficient processes and integrated quality management in achieving sustainable growth and competitiveness in the aerospace industry. By aligning with the paradigm of Industry 4.0, organizations can optimize their operations and contribute to the industry's advancement, delivering safer and more cost-effective aerospace products. The study adopts a multifaceted approach, incorporating extensive literature review, critical analysis of industry trends, examination of quality management frameworks, and a thorough evaluation of the integration potential of Industry 4.0 technologies. The research also involves case studies and expert insights to validate the proposed approach. The investigation reveals that by leveraging Industry 4.0 technologies and embracing an integrated approach to quality management, the aerospace industry can significantly enhance operational efficiency, product quality, and overall sustainability. The seamless integration of processes and the implementation of advanced quality frameworks pave the way for a more competitive and future-ready aerospace industry, meeting the evolving demands of a globalized world.

The present study explored whether exposure to complex childhood trauma (CCT) is reflected in the resting-state electroencephalography (EEG) temporal alpha power of complex trauma-exposed adolescents, given the association of temporal alpha with fear circuitry (learning and conditioning) in a sample of 25 adolescents and similar controls, ages 12-17 years. Both trauma and psychopathology were screened or assessed, and resting-state EEG was recorded, following a preregistered protocol for data collection. Temporal alpha power, corresponding to T5 and T6 electrode location (10-20 international system), was extracted from resting-state EEG in both eyes-open and eyes-closed conditions. We found that in the eyes-open condition, right, but not left, temporal alpha was significantly higher in adolescents exposed to CCT, relative to healthy controls, suggesting that childhood trauma exposure may have a measurable impact on alpha oscillatory patterns, specifically in the right temporal region. Our study highlights the importance of considering neural markers, such as temporal alpha power, in understanding the long-term consequences of CCT exposure in developmental samples, with possible important clinical implications in guiding neuroregulation interventions.

This analysis focuses on identifying the most efficient and cost-effective method of supplying power to a remote site, exploring photovoltaics (PV) and small wind turbines as primary power sources, and evaluating battery banks and hydrogen storage fuel cell systems as potential storage options. The hydrogen storage system converts surplus renewable power into hydrogen through an elec-trolyzer, storing it for later use in a fuel cell when renewable sources produce less power, enabling efficient energy storage during peak production periods. A sensitivity analysis of wind speed and hydrogen subsystem cost was conducted to evaluate the hydrogen storage system's performance. The optimal system graph suggests that the hydrogen subsystem must significantly decrease in cost to rival the battery bank, and in most cases, both the hydrogen system and battery bank were recommended together, offering reliable and efficient power for the remote site. While the battery bank is presently the more feasible option for powering the remote site, continuous monitoring and evaluation of both systems, considering site location, energy needs, and available resources, are essential to determine the most suitable power supply approach as technology advances and costs evolve over time.

Yoga promotes acceptance, compassion, physicality, active postures, mental and emotional awareness, and spiritual benefits. It involves breath techniques, postures, and body locks, maintaining balance and strength. It's based on ethical principles. Beyond simple performance, swimming is a catalyst for overall well-being. Complementarily, yoga serves as an invaluable adjunct for swimmers, enhancing flexibility, strength, and body awareness - a triad essential to aquatic excellence. The confluence of yoga and swimming, particularly through the practice of aqua yoga asanas, presents a new paradigm for both athletes and non-performers alike. Athletes who embrace the harmonious fusion of swimming and yoga unearth the potential for achieving not just athletic mastery but also a more balanced and fulfilling lifestyle. This blend provides a route not only to enhance performance in the water but also to elevate the overall quality of life. We examined the feasibility of incorporating yoga and swimming practice into Romanian subjects' lifestyles, designing a factor analysis in SmartPLS software, based on an online survey. The study assesses the participants' knowledge of yoga's theory and philosophy, as well as their perceptions of the swimming practice's benefits for social and health issues. According to our study, Romanian participants practice yoga and swimming as often as possible to reduce stress, improve concentration for work-related tasks, and improve joint elasticity, balance, and muscular tone. Thus, Yoga and swimming are substitutes for other approaches in prevention and therapy.

3D printing with cement-based materials is a promising manufacturing technique for civil engineering applications that already allows for the design and the construction of complex and highly customized structures using a layer-by-layer deposition approach. Usually, in this type of additive manufacturing, a mixture of cement, water, aggregate and additives is extruded through a specific print head and deposited in successive layers to form the desired shape. The extrusion mechanism is one of the most expensive parts of the 3D printer. Also, for low scale 3D printers, based on the shape of the extruder and the geometry limitation of the mixing blade, the 3D mixture is often limited to a narrow range of materials due to the risk of layer splitting or blockage. Therefore, there is a need to develop affordable and feasible alternatives to the current design-fabrication-application approach of 3D printers. In this paper, various new designed mixtures of fiber reinforced mortars that can be 3D printed using only a commercially available screw pump are analyzed based on their fresh properties and mechanical characteristics. The reduced facility requirements in this approach allow 3D-printing to be more available for civil engineering applications. With further innovation in the future, this method and mixtures can be extended for sustainable and economically feasible printing of single-family housing units.

In an era where the proliferation of large language models blurs the lines between human and machine-generated content, discerning text authenticity is paramount. This study investigates transformer-based language models—BERT, RoBERTa, and DistilBERT—in distinguishing human-written from machine-generated text. By leveraging a comprehensive corpus, including human-written text from sources such as Wikipedia, WikiHow, various news articles in different languages, and texts generated by OpenAI's GPT-2, we conduct rigorous comparative experiments. Our findings highlight the superior effectiveness of ensemble learning models over single classifiers in this critical task. This research underscores the versatility and efficacy of transformer-based methodologies for a wide range of natural language processing applications, significantly advancing text authenticity detection systems. The results demonstrate competitive performance, with the transformer-based method achieving an F-score score of 0.83 with RoBERTa-large (monolingual) and 0.70 with DistilBERT-base-uncased (multilingual).

Essential oils (EOs) have gained economic importance due to their biological activities, and increasing amounts are demanded everywhere. However, substantial differences between the same essential oil samples from different suppliers are reported due to numerous companies involved in EOs production and the continuous development of online sales. The present study investigates the antibacterial and antibiofilm activities of 2-4 samples of five commercially available essential oils (Oregano, Eucalyptus, Rosemary, Clove, and Peppermint oils) from different manufacturers. Their effects were evaluated in vitro on Gram-positive and Gram-negative bacteria (Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa). The antibacterial efficacy (ABE%) and antibiofilm efficacy (ABfE%) were determined spectrophotometrically at 562 and 570 nm using microplate cultivation techniques. The essential oils' calculated parameters were compared with those of three standard broad-spectrum antibiotics: Amoxicillin/Clavulanic acid (AMC), Gentamycin (GEN), and Streptomycin (STR), active on tested bacteria. The results showed that at the first dilution (D1 = 2.5 mg/mL), all essential oils (EOs) exhibited antibacterial activity against Gram-positive and Gram-negative bacteria. On S. aureus and E. coli, EOs had considerable antibacterial effects (ABE = 79.70—92.80%, respectively, 71.30 ‒ 94.00%). The highest antibacterial effects of commercially available EOs were against P. aeruginosa because all exhibited a significant antibiofilm activity. Their antibiofilm efficacy intensively decreased on E. coli and S. aureus. Generally, the samples with different manufacturers of the same EO showed similar effects. Only Clove and Peppermint oils samples displayed a higher variability associated with active metabolites' different contents, maybe due to various zones of harvesting raw material, numerous technologies involved in EOs obtaining processes, and complex interactions between components.

This paper develops a chemical model for a closed constant volume combustion of gaseous mixtures of methane and hydrogen. Since the combustion is strongly depending on temperature, pressure and fuel composition, they were chosen the actual corresponding thermodynamic systems using this kind of combustion, respectively the spark ignition reciprocating engines in order to evaluate the combustion parameters and exhaust flue gases composition. The actual cycles impose extra restrictive operational conditions through the engine volumetric compression ratio, the geometry of combustion volume, the mode to prepare the mixture of methane and hydrogen, the cooling system and the delivered power. The chemical model avoided the unknown influences in order to explain accurately the influence of hydrogen upon the constant volume combustion and flue gases composition. The model adopted simplifying hypotheses, respectively isentropic compression and expansion processes, closed constant volume combustion developed by two successive steps obeying to the energy and mass conservation laws and, flue gases exhaust described also by two steps, i.e. an isentropic expansion through the flow section of exhaust valves followed by a constant pressure stagnation (this succession is corresponding in fact to a throttling direct process). The chemical model supposed the homogeneous mixtures of gases with variable heat capacities function of temperatures, the Mendeleev - Clapeyron ideal gas state equation and, the variable chemical equilibrium constants for chosen chemical reactions. It was assumed that the flue gases chemistry is prevailing during the isentropic expansion and flue gases exhaust and has mainly a thermal ground. The chemical model allowed evaluation of flue gasses composition and of noxious emissions.

Chemical substances such us CS-gas used in military operations are chemical compounds that present a series of peculiarities that affect the ecosystem by disrupting the ecological balance. This study evaluated the toxicological character of O-chlorobenzylidenemalonitrile (CBM), (substance present in CS-gas) on the algae Cholrella sp. and analyzed the toxicity limit and the response of the microorganism to the oxidative stress caused by this substance. In order to under-stand the toxicological mechanisms of CBM on algal culture, a series of parameters were analyzed such as: the cell growth curve, the average specific growth rate (µ), percent inhibition in yield(I%), dry cell weight (DCW), percent viability and productivity of algal biomass flocculation activity(FA), change in oxygen production. The content of chlorophyll pigments, was characterized by Fourier transform infrared spectroscopy (FTIR) fluorescence spectroscopy and analysis of the surface structure of algal cells by SEM spectroscopy. This study aims to provide fundamental data for understanding the toxicity of CBM to aquatic organisms and provides a basis for assessing the potential for impact on aquatic ecosystems. The results obtained could be taken into account in the management of the decontamination of the affected areas.

Pancreatic ductal adenocarcinoma (PDAC) is the most common malignant tumor of the pancreas, carrying a poor prognosis, in most cases patients being diagnosed in a nonresectable stage. Image-based artificial intelligence (AI) models implemented in tumor detection, segmentation and classification could improve diagnosis with better treatment options and increased survival. This review included papers published in the last 5 years and describes the current trends in AI algorithms used in PDAC. We analyzed the applications of AI in detection of PDAC, segmentation of the lesion and classification algorithms used in differential diagnosis, prognosis, and histopathological and genomic prediction. The results show lack of multi-institutional collaboration and stresses the need for bigger datasets in order for AI models to be implemented in a clinically relevant manner.

Fatal hemoptysis secondary to severe pulmonary veins stenosis is an exceptional late complication of radiofrequency ablation for atrial fibrillation. We report the case of a 53-year-old male with a history of atrial fibrillation treated by radiofrequency ablation and admitted in our center 6 months after the initial procedure because of aggravating dyspnea and fatigability. Transthoracic echocardiography showed moderate dilation of right heart cavities, severe pulmonary hypertension, and a turbulent flow in superior pulmonary veins. The cardiologist suspected pulmonary vein(s) stenosis and cardiac computed tomography (CT) angiography was performed with findings of severe stenosis of the right superior, right inferior and left inferior pulmonary veins, near-occlusion of the left superior pulmonary vein and the vein draining the apical segment of the right lower lobe. The CT scan also revealed soft tissue attenuation of the mediastinum posterior to the left atrium suggesting fibrosing mediastinitis together with parenchymal findings consistent with pulmonary venooclusive disease and an area of hemorrhagic infarction. Fatal hemoptysis occurred 3 days after the evaluation before any treatment was attempted. In conclusion, severe pulmonary stenosis remains a rare but severe complication of radiofrequency ablation. Prevention is the key element together with an early diagnosis as the entity is potentially life-threatening.

The purpose of this article is to investigate and analyze the practices of scientific management within the County Departments of Sports and Youth (CDYS) in Romania. Conducted through a comprehensive research endeavor spanning from January to June 2022, the study utilized a standardized questionnaire as its primary instrument for data collection, distributed among CDYS directors. A notable finding from the study indicates that a significant proportion of respondents (44.9%) perceive notable disparities in the normative-functional elements governing the National Sports System in Romania compared to international standards. Moreover, the majority (51%) consistently adhere to regulatory acts, while a substantial portion (69.4%) underscore the importance of strict adherence to internal regulations in strategy formulation. Furthermore, an overwhelming majority (88.9%) acknowledge the substantial influence of available resources on strategy development, with collaboration with authorities primarily occurring through direct communication channels. Respondents prioritize multiple objectives (44.9%), affirm the necessity of various competencies (53.1%), and identify a lack of human and financial resources (59.2%) as the most significant obstacle. Notable achievements highlighted in the study include the improvement of the county's sports performance (53.1%). Respondents also believe that setting clear and realistic objectives (38.8%) is pivotal to enhancing CDYS management, while considerations in formulating strategies emphasize trends in the sports domain (42.9%) and the specific needs of the local sports community (42.9%). Overall, this research contributes to the understanding and promotion of more efficient practices in managing sports and youth departments within Romania's counties.

The Global Burden of Disease Study (GBD) 2019 reveals an increasing prevalence of Type 2 Diabetes Mellitus (T2DM) from 1990 to 2019. This study delves into the role of dietary risk factors across different demographic and socioeconomic groups. Utilizing data from the GBD 2019, it analyzes age-adjusted T2DM metrics—death counts, Disability-Adjusted Life Years (DALYs), and Age-Standardized Rates (ASR)—stratified by age, sex, and region. The study employed Estimated Annual Percentage Changes (EAPCs) to track trends over time. Results show that in 2019, 26.07% of T2DM mortality and 27.08% of T2DM DALYs were attributable to poor diets, particularly those low in fruits and high in red and processed meats. Geographic variations in T2DM trends were significant, with regions like Southern Sub-Saharan Africa and Central Asia experiencing the most substantial increases in Age-Standardized Mortality Rate (ASMR) and Age-Standardized DALY Rate (ASDR). A positive correlation was noted between Socio-Demographic Index (SDI) and T2DM burden due to dietary risk factors. The study concludes that targeted public health initiatives promoting dietary changes could substantially reduce the global T2DM burden.

: Background and objectives: One of the most severe symptoms of extrapulmonary tuberculosis (TBEP) is tuberculous meningitis (TBM) which is linked to significant morbidity and high mortality. It is well recognized that HIV-positive people are more likely to develop TBEP, including TBM, especially if they have severe immunodeficiencies. Material and methods: We conducted a retrospective clinical study based on hospital medical records of the diagnosed patients with HIV/AIDS and Tuberculous Meningitis in North-eastern Romania, hospitalized at "Sf. Parascheva" Clinical Hospital of Infectious Diseases from Iasi. We aim to highlight the profile and the caracteristics of the HIV/AIDS and Tuberculous Meningitis coinfection cases. The time frame under study was from January 1st, 2010, to December 1st, 2022. Results: Our Center has a total number of patients on record of 1692. Patients co-infected with HIV- TB were 195 of which 19 cases were HIV- TBM coinfection and it was more common in women. From this total, 6 cases were late presenters and 13 patients were already in the center's records with a deficient immunological viral status, non-compliant, and non-adherent to antiretroviral therapy. The average age in the study group was 27 years old. The mean admission day number was 17.73 days. CSF findings (qualitative and quantitaitve examination, biochemestry) were in accordance with the literature. Conclusions: The key to the management of the HIV-positive patient is the multidisciplinary approach and access to antiretroviral therapy. We must find and eliminate obstacles affecting patients and the healthcare system. In order to increase ART uptake among HIV-infected TB patients and to put an end to the TB and HIV epidemics.

In this work, the degassing process of corn seeds was experimentally and numerically analyzed by removing air or other gases from around the seeds, specifically from the seed coating, in a rough vacuum chamber. The two complementary variants are employed to understand and optimize this process to improve the quality and germination rate of the seeds. Several experiments were conducted with well-established durations and masses of corn seeds at different temperatures to observe and record the behavior of the system, facilitating the modeling of the degasification process in the vacuum compartment. Modeling the degasification operation in the vacuum chamber allowed for determining the pressure profiles on the vacuum chamber and its lid. Numerical simulations were either conducted using a simulation program developed in the Visual Basic Applications (VBA) language for Microsoft Excel to model the degassing process in the vacuum chamber, or with the assistance of specialized software (transient structural analysis and simulation program in the ANSYS Workbench environment). Statistical analysis of the correlation between experimental and estimated pressure values revealed that both the proposed mathematical model and the solution method are well-chosen, with differences expressed through the absolute error (EA) being very small. Structural dynamic analysis carried through the Finite Element Method (FEM) highlights that the chosen materials for manufacturing the vacuum chamber vessel (316 stainless steel) or the chamber lid (transparent acrylic plastic) are durable and capable of withstanding the desired pressure and temperature demands in the seed treatment process. Additionally, through structural dynamic analysis, it was possible to study the deformation of system components, providing a detailed perspective on their structural distribution.

Damage detection based on modal parameter changes becomes popular in the last decades. Nowadays are available robust and reliable mathematical relations to predict the natural frequency changes if damage parameters are known. Using these relations, it is possible to create databases containing a large variety of damage scenarios. Damage can be thus assessed by applying an inverse method. The problem is the complexity of the database, especially for structures with more cracks. In this paper, we propose two machine learning methods, namely the random forest (RF) and the artificial neural network (ANN) as search tools. The databases we developed contain damage scenarios for a prismatic cantilever beam with one crack and ideal and non-ideal boundary conditions. The crack assessment is made in two steps. First, a coarse damage location is found from the networks trained for scenarios comprising the whole beam. Afterward, the assessment is made involving a particular network trained for the segment of the beam on which the crack is previously found. Using the two machine learning methods, we succeed to estimate the crack location and severity with high accuracy for both simulation and laboratory experiments. Regarding the location of the crack, which is the main goal of the practitioners, the errors are less than 0.6%. Based on these achievements, we concluded that the damage assessment we propose, in conjunction with the machine learning methods, is robust and reliable.

Evaluating the integrity of structures is an important issue in engineering applications. The use of vibration-based techniques has become a common approach to assessing cracks, which are the most often occurring damage in structural elements. When involving an inverse method, it is necessary to know the influence of the position and the geometry of the crack on the modal parameter changes. The geometry of the crack, both in size and shape, defines the damage severity (DS). In this study, we present a method (DS-SHC) used for estimating the DS for closed and open transverse cracks in beam-like structures by using the intact and damaged beam deflections under its weight and a Stochastic Hill Climbing (SHC) algorithm. After describing the procedure of applying DS-SHC, we calculate for a prismatic cantilever beam the severities for different crack types and depths. The results are tested by comparing the DS obtained with DS-SHC with those acquired from dynamic tests made using professional simulation software. We obtained a good fit between the severities determined in these two ways. Afterward, we performed laboratory experiments and find out that the severities obtained with the DS-SHC method can accurately predict the frequency changes due to the crack. Hence, these severities are a valuable tool for damage detection.

Neonatal diffuse cutaneous mastocytosis (NDCM) is defined as the infiltration of the epidermis by a clonal proliferation of mast cells, observed at birth, without initial signs of systemic involvement. The typical driver mutation is located in the KIT gene. We report a rare case of a boy, born at term, presenting already at birth with generalized subcutaneous nodules, on the face, scalp, trunk, back, hands, and feet. The spleen, liver and inflammatory markers were normal at birth. Tryptase was significantly elevated. Bone marrow biopsy showed no mast cell involvement at age 2 months. A punch biopsy at age 2 months revealed CD117-positive cells diffusely infiltrating the skin, with subsequent DNA NGS sequencing for the formalin fixed paraffin embedded tissue (FFPE) identifying the pathogenic NM_000222.3:c.1504_1509dup; p.(Ala502_Tyr503dup) variant in the KIT gene previously associated with cutaneous mastocytosis. At 2 years follow-up, he had splenomegaly and multiple cervical, and inguinal adenopathy while the skin nodules persisted especially on the scalp with accompanying pruritus. He received oral and local sodium cromoglycate, oral antihistamines, antibiotic cream for skin infection, and iron supplementation, however compliance to treatment was relatively low. The prognosis is difficult to predict, as he developed systemic involvement, failure to thrive and mild psychomotor delay. A case aggregation of NDCM reported in the literature was performed to provide a comprehensive overview of this rare pathology, to better understand the prognosis. NDCM is a life-threatening disease with severe complications. Almost half had severe complications, such as mast hepatosplenomegaly, adenopathy, bacterial infections, mast cell leukaemia, and systemic involvement.

Solar photovoltaic (PV) technology is a cornerstone of the global effort to transition towards cleaner and more sustainable energy systems. This paper explores the pivotal role of PV technology in re-ducing greenhouse gas emissions and combatting the pressing issue of climate change. At the heart of its efficacy lies the efficiency of PV materials, which dictates the extent to which sunlight is transformed into electricity. Over the last decade, substantial advancements in PV efficiency have propelled the widespread adoption of solar PV technology on a global scale. The efficiency of PV materials is a critical factor, determining how effectively sunlight is transformed into electricity. Enhanced efficiency, achieved through a decade of progress, has driven the global expansion of solar PV. Multi-junction photovoltaic materials have now exceeded 40% efficiency in lab tests. China leads the world in solar PV installations, boasting over 253 GW of installed capacity by the end of 2021. Other prominent countries in this sector are the United States, Japan, Germany, and India. Supportive policies like feed-in tariffs, net metering, tax incentives, and cost reductions in PV modules have made solar PV increasingly competitive against fossil fuel-based power generation. Solar PV technology holds immense potential for creating a cleaner, reliable, scalable, and cost-effective electricity system. To expedite its deployment and foster a more sustainable energy future, continued investment in research and development, along with supportive policies and market mechanisms, is essential. This paper underscores the pivotal role of solar PV technology in the global energy transition and advocates for a concerted effort to unlock its full potential in achieving a more sustainable and resilient energy future.

This paper represents a thermodynamic and chemical reactivity study regarding the possible formation of four proteinogenic amino acids: glutamic acid, glutamine, lysine and arginine, starting from three synthons: methylene, nitrene and carbon monoxide. All intermediates are specified: neutral molecules and radicals involved in the formation of these four proteinogenic amino acids. The study is based on the synthonic theory of the formation of the first proteinogenic amino acids and their corresponding polypeptides. The thermodynamic quantitative data are obtained from mechanical-quantum calculations mainly by the DFT-B88-LYP methods, DZVP basis set.

The military taxonomy of class indices for chemical and biological warfare agents considers halogenated tear agents (CS) to be incapacitating causing local pain and discomfort with associated reflexe. The removal yield of the organic substances present in the water depends on the environmental conditions, on the chemical composition of the water and on the chemical substance dissolved in the water, which constitutes the substrate of the metabolic activities of the microorganisms that use these substances in the biochemical reactions of the cellular enzyme complexes. The two -CN groups in the malonic nitrile molecule are strongly electron-attracting and activate the CH2 group to which they are linked, and because of this, malononitrile has the role of a methylene component in condensation reactions with aldehydes or ketones. The results obtained after analyzing the degree of hydrolysis in the samples that contained the biological suspension indicated that no CBM metabolites were detected in any biological sample, regardless of the test concentration, analyzed 24 h after incubation. In the parallel samples, the aqueous solutions of CBM without biological treatment had metabolites in the samples., at 30 minutes the degree of hydrolysis is 0.21%, at 60 minutes, the degree of hydrolysis is 5.42%, after 90 minutes, the degree of hydrolysis is 6.19%, and after 24 hours. the degree of hydrolysis is 23.41%. Chemical substances in contact with microorganisms are used by them in the biochemical processes in which they are involved, the retention time and biodegradation capacity have led to an increased effect of the metabolism of toxic substances, in metabolic reactions, organic substances are the source of carbon and energy for biochemical processes. The tests performed indicate that the suspension of Chlorella sp. consumed the entire amount of CBM and metabolites from the analyzed samples The tests prove that the biological material can be used for the decontamination of the affected areas.

The deregulated markets have replaced the traditional way of trading electricity from the producers to the consumer, via government-owned organizations and regulated tariffs. Nowadays, electricity prices are determined by the offer-demand mechanism and consumers can negotiate tariffs with their supplier of choice. For classic wholesale suppliers, the tariffs are a result of the transactions performed on the wholesale market and the energy mix available in certain geographical regions. In parallel with becoming eligible and participating in retail electricity markets, the consumers use increasingly local generation sources based mostly on renewable energy technologies such as PV panels, and become prosumers. They want to be able to sell back to the market the generation surplus, in order to obtain the maximum benefits from their initial investment. Currently, several trading mechanisms for prosumers are available, ranging from the simplest, selling back the surplus to an aggregator at fixed tariffs, to more complex market schemes. This paper proposed a two-tier local market model for prosumers and consumers connected in microgrids, based on the blockchain technologies and other technologies and concepts such as remote sensing, smart grids, crowdsourcing and energy poverty.

The deregulated markets have replaced the traditional way of trading electricity from the producers to the consumer, via government-owned organizations and regulated tariffs. Nowadays, electricity prices are determined by the offer-demand mechanism and consumers can negotiate tariffs with their supplier of choice. For classic wholesale suppliers, the tariffs are a result of the transactions performed on the wholesale market and the energy mix available in certain geographical regions. In parallel with becoming eligible and participating in retail electricity markets, the consumers use increasingly local generation sources based mostly on renewable energy technologies such as PV panels, and become prosumers. They want to be able to sell back to the market the generation surplus, in order to obtain the maximum benefits from their initial investment. Currently, several trading mechanisms for prosumers are available, ranging from the simplest, selling back the surplus to an aggregator at fixed tariffs, to more complex market schemes. This paper proposed a two-tier local market model for prosumers and consumers connected in microgrids, based on the blockchain technologies and other technologies and concepts such as remote sensing, smart grids, crowdsourcing and energy poverty.

With the development of the energy sector based on renewable primary sources, structural changes are emerging for the entire national energy system. Initially, it was estimated that energy generation based on fossil fuels would decrease until its disappearance. However, the evolution of CO2 capture capacity leads to a possible coexistence for a certain period with the renewable energy sector. The paper develops this concept of coexistence of the two systems, with the positioning of green hydrogen not only within the renewable energy sector but also as a transformation vector for carbon dioxide captured in the form of synthetic fuels such as CH4 and CH3OH. The paper also analyzes the economic aspects related to price differences for energy produced in the two sectors, as well as their interconnection. The technical aspect, as well as the economic one, for storage through various other solutions besides hydrogen, has been highlighted. The development of the renewable energy sector and its demarcation from the fossil fuel energy sector, even with the transcendent vector represented by green hydrogen, leads to the deepening of dispersion aspects between the electricity sector and the thermal energy sector, a less mentioned aspect in current works but of great importance.

This study focuses on the design, installation, and performance evaluation of a photovoltaic farm situated in Tulcea County, Romania, connected to a 20 kV distribution network. The farm, with a peak capacity of approximately 2800 kWp, benefits from Romania’s favorable climate conditions and supportive renewable energy policies. The analysis encompasses both the photovoltaic panel array and the electrical energy evacuation system. The substation at the park is equipped with technology that adheres to European standards and incorporates advanced features typical of modern electricity distribution networks. The assessment includes an evaluation of the park’s operational efficiency, with detailed calculations of the performance ratio and various power losses attributed to factors like temperature fluctuations, fouling, inverter efficiency, grid-related challenges, and availability issues. The farm contributes around 3620 MWh of electricity to the grid annually, demonstrating the effectiveness of photovoltaic installations in promoting sustainable energy solutions within regional energy networks.

(1) Background: Show caves are unique natural attractions and touristic traffic can trigger their degradation within a very short time. There are no universal solutions to counter the effects of the touristic impact upon cave environment and both protection protocols and management plans have to be established on a case-by-case basis; (2) Methods: The study includes four show caves from the Romanian Carpathians, where monitoring of the number of visitors, paralleled by the monitoring of the main physico-chemical parameters of the air and water (CO2, temperature, humidity, drip rate, conductivity, and pH) was implemented; (3) Results and Conclusions: The results of the study has: (i) established a monitoring protocol to be applied to each of the four show caves; (ii) established a set of basic principles to be enforced by the management of show caves; (iii) issued a set of preventive measures and instructions to be followed by the personnel and stakeholders of the caves.

There are many welded structures in the world such as bridges and viaducts that are subject to fatigue. These structures, generally made of non-alloy or low-alloy steels, have been put into operation some of them with many years ago and have accumulated a large number of variable load cycles over the time. For this reason the occurrence of fatigue phenomenon is inevitable and consists in the occurrence of failures at stresses applied to the structure, below the yield limit of the material. These stresses under the static loads would not cause the failures to appear..This paper will investigate whether two reconditioning techniques “weld toe grinding” and “WIG remelting weld toe”, influences favorably the behavior of welded structures made from HSLA steel, in static and variable loads and therefore if the application of these techniques is justified in both cases. In the paper will be presented the chemical composition and mechanical properties of the base and filler materials, micro and macrostructures, graphics with the variation of microhardness, static and fatigue tensile tests will be performed, and it will be rised durability curve in case of fatigue tests.

Type 1 Diabetes mellitus (T1DM) occurs when insulin is not produced in the Pancreas due to the autoimmune destruction of the beta cells. The patients may be diagnosed after 80-90% of the beta cells are destroyed. Insulin remains the essential medicine in T1DM management, under continuous monitoring of glucose levels. T1DM management consists of a complex and precise set of self-care measures for the entire life; during this continuous process, the patients could become overwhelmed, angry, anxious, frustrated, and/or discouraged. Therefore, to be widely used and provide general benefits, new technologies for DM management must provide clinical advantages without compromising safety. The compliance of T1DM patients is also essential, thus improving their quality of life (QoL). Moreover, the accessibility of the new system for patients through healthcare coverage is critical; they must be able to buy the new devices and accessories and pay for their maintenance. In this context, our work aims to describe the most recent technologies regarding continuous glucose monitors (CGMs) and continuous subcutaneous insulin infusion (CSII) systems, correlated with psychosocial impact and capacity to improve T1DM patients' life quality.

Four-wire low voltage microgrids supply one-phase consumers with continuously changing electricity demand. For addressing climate change concerns, governments implemented incentive schemes for residential consumers, encouraging the installation of home PV panels for covering self-consumption needs. In the absence of sufficient storage capacities, the surplus is sold back by these entities, called prosumers, to the grid operator or in local markets, to other consumers. While these initiatives encourage the proliferation of green energy resources, and ample research is dedicated to local market designs for prosumer-consumer trading, the main concern of distribution network operators is the influence of power flows generated by prosumer surplus injection on the operating states of microgrids. The change in power flow amount and direction can greatly influence the economic and technical operating conditions of radial grids. This paper proposes a metaheuristic algorithm for prosumer surplus management that optimizes the power surplus injections using the automated control of three-phase inverters, with the aim of improving the active power losses and balancing the phase voltage profiles. A case study is performed on two real distribution networks with distinct layouts and load profiles and the algorithm shows its efficiency in both scenarios.

A growing number of households benefit from the government subsidies to install renewable generation facilities such as PV panels, used to gain independence from the grid and provide cheap energy. In the Romanian electricity market, these prosumers can sell their generation surplus only at regulated prices, back to the grid. A way to increase the number of prosumers is to allow them to make higher profit by selling this surplus back into the local network. This would also be an advantage for the consumers, who could pay less for electricity exempt from network tariffs and benefitting from lower prices resulting from the competition between prosumers. One way of enabling this type of trade is to use peer-to-peer contracts traded in local markets, run at microgrid (μG) level. This paper presents a new trading platform based on smart peer-to-peer (P2P) contracts for prosumers energy surplus trading in a real local microgrid. Several trading scenarios are proposed, which give the possibility to perform trading based on participants’ locations, instantaneous active power demand, maximum daily energy demand and the principle of first come first served implemented in an anonymous blockchain trading ledger. The developed scheme is tested on a low-voltage (LV) microgrid model to check its feasibility of deployment in a real network. A comparative analysis between the proposed scenarios, regarding traded quatities and financial benefits is performed.

The paper concludes that the choice of charging strategy depends on the specific requirements and limitations of the off-grid solar PV system, and that a careful analysis of the factors that affect performance is necessary to identify the most appropriate approach. Also provides valuable insights for designing and optimizing off-grid solar PV systems, which can help to improve the efficiency, reliability, and cost-effectiveness of these systems.

The Covid-19 pandemic was a challenge for the whole world and it had major secondary effects on humans and environmental health. The viral infection induced, in many situations, secondary bacterial infections, especially enteric infections by destabilizing the balance of the gastrointestinal microbiota. The large-scale use of antibiotics and biocides both for curative and preventive purposes has determined an increase in bacterial resistance and at the same time the possibility of pathogenic microorganisms’ multiplication and their dissemination to natural environments. Wastewater is the main vector of faecal microorganisms that favour their dissemination into natural aquatic ecosystems. The present paper aimed to analyze the effect of Covid-19 pandemic on the microbiological quality of wastewater from sewage treatment plants in Romania and its impact on receiving rivers. In order to highlight different and important areas of Romania, 3 cities from the east, center and west were selected for a microbiological evaluation of their WWTPs influent and effluent between ante-Covid-19 and Covid-19 pandemic peak period, when the Covid-19 pandemic had a direct impact on WWTPs microbial composition. Our study showed a higher contamination with fecal bacteria linked to a higher Covid-19 incidence. The increased usage of pharmaceutical compounds, at their turn, increased the number of resistant bacteria reaching the environment via WWTP effluents.

Cardiotoxicity remains one of the leading causes of morbidity and mortality in childhood cancer survivors. This study aimed to evaluate cardiotoxic side effects of chemotherapeutic regimens in a pediatric population, as revealed by assessment of baseline end-of-treatment and in follow-up after 1 year. A prospective study was conducted on 39 children, enrolled over a period of 5 years (2017-2022), diagnosed with leukemia and receiving chemotherapy regimens. A multimodal echocardiographic evaluation was done (two-dimensional echocardiography and M-mode, tissue doppler imaging (TDI) and 2D-speckle tracking (2DST) before the initiation of the cytostatic treatment, at the end of the treatment and 1 year after the treatment. Ultrasound-derived parameter values were compared between evaluations and correlated with cumulative doses of chemotherapeutic agents used. There were no significant differences in mean values for any of the imagistic parameters analyzed. However, a significant correlation was found between E’value percentage variation and cumulative dose of both anthracyclines and antimetabolics administered (p=0.03). Moreover, a significant linear regression correlation was found between alkylating agent dose and global longitudinal strain (GLS)(p<0.01). Non-invasive cardiovascular imaging parameter values did not differ significantly from baseline in our study, but some of them seem to be dependent upon cumulative dose of cytostatic agents used. Further studies on larger populations and involving a longer follow-up period might provide more insight into cardiotoxicity of chemotherapy regimens.

Background and Objectives: Fibrillinopathies have different phenotypic expression: Marfan- like skeleton features, MLSF; mitral valve prolapse syndrome, MVPS; MASS phenotype, M= mitral valve prolapse, MVP, A= aortic root dilation, S= skeletal features, and the second S= (cutaneous) striae; Marfan syndrome, MS. These are inherited connective tissue diseases, provoked by a mutation of the encoding gene for a protein(fibrillin 1, FBN1) which has major importance in the formation of elastic fibers.The study had the following main objectives: the correlation between disc displacement, DD( a major sign for temporomandibular joint dysfunction, TMD) on magnetic resonance imaging, MRI, and aortic Z score(a major sign for aortic root dilation) on echocardiography; the predictive value of DD towards aortic Z score. DD had 2 types of severity: DD with reduction(the mild type, DDwR) , and DD without reduction( the severe type, DDwoR). Materials and Methods: The type of fibrillinopathy was precised by clinical exam( systemic score), ophthalmic exam(for ectopia lentis), and echocardiography(aortic Z score, MVP). Medical treatment consisted in betablockers, BB(for patients with tachycardia), or angiotensin II receptor blockers, ARB. Surgical treatment was addressed to aortic root aneurysm, and severe MR. DD benefited by dental conservatory treatment, or surgical restoration.Results: DD- Z score had a powerful correlation in MASS(Rho= 0.787, p&lt; 0.01), and in MS patients(Rho=0.819, p&lt; 0.01). For the entire sample, both DDwR- Z score, and DDwoR- Z score had a moderate correlation(Rho= 0.469, and respectively 0.669). Muchmore, DD was an important predictor for Z score. DDwoR had a double power of prediction for Z score, comparative with DDwR(B coefficient= 1.661 for DDwR, and 3.281 for DDwoR). Conclusions: TMD had a powerful correlation with aortic root dilation, in MASS, and MS patients from the sample. Likewise, TMD was a major predictor for aortic root dilation, in the entire sample. We can utilize in clinical practice, an extracardiac finding, TMD, obtained by a non-invasive technique, MRI, for cardiac severity stratification of fibrillinopathies.

In this article, we consider a class of nonsmooth interval-valued multiobjective semi-infinite programming problems with vanishing constraints (in short, NIMSIPVC). We introduce the VC-Abadie constraint qualification (in short, VC-ACQ) for NIMSIPVC and employ it to establish Karush-Kuhn-Tucker (in short, KKT)-type necessary optimality conditions. Related to NIMSIPVC, we formulate interval-valued vector Lagrange type dual and scalarized Lagrange type dual problems. Subsequently, we establish weak, strong, and converse duality results relating NIMSIPVC and corresponding dual problems. In addition, we introduce the notions of saddle points for interval-valued vector Lagrangian and scalarized Lagrangian of NIMSIPVC. Moreover, we establish the saddle point optimality criteria for NIMSIPVC. Various non-trivial examples are provided to demonstrate the validity of established results. To the best of our knowledge, optimality conditions, Lagrange type duality, and saddle point optimality criteria for NIMSIPVC have not been investigated yet via Clarke subdifferentials.

Non-alcoholic fatty liver disease (NAFLD) has gained attention in the last few years due to its increasing prevalence worldwide becoming a global epidemic. This review aims to discuss the latest recommendations regarding diagnosis and treatment of NAFLD-associated HCC and the remaining challenges. Thus, there is a high amount of data derived from basic and clinical studies that revealed the molecular pathways which drive NAFLD-associated hepatocellular carcinoma (HCC). Based on these findings, new prevention, surveillance and treatment strategies are emerging. However, current data on treatment modalities in NAFLD-associated HCC are still scarce, but based on subgroup analysis results from non-NAFLD HCC studies are promising and could provide a basis for future research agenda to address NAFLD/NASH patients. Conclusion: Due to the pandemic proportions that NAFLD gained in the last few years, there is a high amount of data derived from basic and clinical studies that revealed the molecular path-ways which drive NAFLD-associated HCC. Based on these findings, new prevention, surveillance and treatment strategies could be developed at an individual level.

Tomato is considered the most important vegetable crop worldwide. Improving the nutritional value of fruits must be based on sustainable production in terms of varieties and fertilization management. This study aimed to improve the nutritional value (total soluble solids, acidity, lycopene, β-carotene, polyphenols, macro and microelements) of two tomato varieties (‘Cristal’ and ‘Siriana’) under three fertilization types (NPK chemical fertilizer, chicken manure and biological fertilizer with microorganisms) for the greenhouse. Primary metabolism compounds do not vary significantly according to the type of fertilizer used. The results for the antioxidant compounds showed a better effect of biological fertilization compared to chemical fertilizer and control unfertilized. The tomato fruits from the local cultivar (‘Siriana’) are richer in nutritional compounds such as rutin, regardless of the type of fertilization, which denotes a good ability to adapt to crop conditions. Tomato cultivars reacted positively to microbiological fertilization compare to chemical, thus producing nutritious fruits under sustainable management. Tomato fruits were richer in the quality of microelement contents.

This paper presents a demonstration of the feasibility of fabricating micro-cantilever harvesters with extended stress distribution and enhanced bandwidth by exploiting an M-shaped two-degrees-of-freedom design. The measured mechanical response of the fabricated device displays the predicted dual resonance peak behavior with the fundamental peak at the intended frequency. This design has the features of high energy conversion efficiency in a miniaturized environment where the available vibrational energy varies in frequency. It makes such a design suitable for future large volume production of integrated self powered sensors nodes for the Internet-of-Things.

The global climate change mitigation efforts have increased the efforts of national government to incentivize local households in adopting individual renewable energy as a mean to help reduce the usage of electricity generated using fossil fuels and to gain independence from the grid. Since the majority of residential generation is made by PV panels that generate electricity at off-peak hours, the optimal management of such installations often considers local storage that can defer the use of locally generated electricity at later times. On the other hand, the presence of distributed generation can affect negatively the operating conditions of low-voltage distribution networks. The energy stored in batteries located in optimal places in the network can be used by the utility to improve the operation of the network. This paper proposes a metaheuristic approach based on a Genetic Algorithm that considers three different scenarios of using energy storage for reducing the losses in the network. Prosumer and network operator priorities can be considered in different scenarios inside the same algorithm, to provide a comparative study of different priorities in storage placement. A case study performed on a real distribution network provides insightful results.

In the last years, the Distribution Grid Operators (DGOs) assumed transition strategies of the distribution grids towards an active area associated with the "Smart Grids" concept. They are considering the use of Artificial Intelligence techniques, combined with advanced technologies and real-time remote communication solutions of the enormous data amounts, to develop smart solutions into the small size distribution grids, also called microgrids (μGs). These solutions will provide support for the DGOs to ensure an optimal operation of the technical infrastructure of the μGs. In this context, a bi-level methodology for solving the phase load balancing problem in the μGs with complex topologies and a high number of single-phase consumers, considering a clustering-based selection criterion of the consumers for placement of the switching devices, was proposed in the paper. A real μG from a rural area, with 114 consumers integrated into the Smart Metering System (SMS), belonging to the DGO from Romania, was considered in testing the proposed methodology. An implementation degree of 17.5%, corresponding to the phase load balancing equipment installed to only 20 consumers from the μG, led to a faster computational time with 43% and reducing the number of switching operations by 92% than in the case of a full implementation degree (100%). The performance indicators related to the unbalance factor and energy-saving used in the evaluation of the technical benefits highlighted the efficiency of the proposed methodology.

In the electric distribution systems, the “Smart Grid” concept is implemented to encourage energy savings and integration of the innovative technologies, helping the Distribution Network Operators (DNOs) in choosing the investment plans which to lead the optimal operation of the networks and increasing the energy efficiency. In this context, a new phase load balancing algorithm was proposed to be implemented in the low voltage distribution networks with hybrid structures of the consumption points (switchable and non-switchable consumers). It can work in both operation modes (on-line and off-line), uploading information from different databases of the DNO which contain: the consumers’ characteristics, the real loads of the consumers integrated into the Smart Metering System (SMS), and the typical load profiles for the consumers non-integrated in the SMS. The algorithm was tested in a real network, having a hybrid structure of the consumption points, on a time interval by 24 hours. The obtained results were analyzed and compared with other algorithms from the heuristic (Minimum Count of Loads Adjustment algorithm) and the metaheuristic (Particle Swarm Optimization and Genetic Algorithms) categories. The best performances were provided by the proposed algorithm, such that the unbalance coefficient resulted in the smallest value (1.0017). The phase load balancing led to the following technical effects: decreasing the average current in the neutral conductor with 94% and for the energy losses with 61.75 %, and increasing the minimum value of the phase voltage at the farthest pillar with the 7.14 %, compared to the unbalanced case.

The COVID-19 pandemic caused by severe acute respiratory syndrome coronavirus 2 (SARS- CoV-2) infection has required a complete change in the management of patients with gastrointestinal disease who needed to undergo endoscopic procedures. In the second year of the COVID-19 pandemic, due to restrictions for elective endoscopic procedures a large number of cancer patients were prevented from early diagnosis of several digestive cancers, which has led to a serious burden in the health system which nowadays needs to be dealt with. We designed a prospective study that included patients in whom access to elective endoscopic examinations during the COVID-19 pandemic has been delayed. Our aim was to investigate the impact of the COVID-19 pandemic on the diagnosis rate of digestive tract malignancies in the context of a health crisis management that generates an ethical dilemma regarding the balance of utilitarianism versus deontology. Our study shows that the decrease in the number of newly diagnosed gastrointestinal cancers by endoscopy and biopsy during the pandemic restrictions and the delay in diagnosis have hads a clear impact on stage migration due to disease progression.

Colorectal cancer is the second leading cause of cancer-related mortality worldwide. Numerous pathophysiological mechanisms, such as abnormal cell proliferation, cell differentiation, resistance to apoptosis, invasion of structures adjacent to colorectal tumor cells, and distant metastasis, are involved in colorectal carcinogenesis. These processes are initiated by the complex interaction of a number of genetic and environmental factors, including sedentary lifestyle, obesity, alcohol consumption, smoking or gut microbiota. Despite the significant progress achieved in the diagnostic and therapeutic management of patients with colorectal cancer, there has been recently a noteworthy increase in the incidence of colorectal cancer in individuals below the age of 50 years. Early-onset colorectal cancer has a different frequency of oncogenic mutations, a higher prevalence of mucinous histology, a distinct deoxyribonucleic acid (DNA) methylation profile, a more distal location, and lower survival rates. A significant improvement in the prognosis of these patients can be achieved through the detection and removal of modifiable risk factors, along with the implementation of personalized screening strategies for individuals at high risk for this malignancy. Furthermore, gaining comprehension of the pathophysiological mechanisms by which these risk factors contribute to the process of oncogenesis may facilitate the discovery of novel therapeutic targets.

In this paper, we consider a class of bilevel programming problems (abbreviated as, BLPP). Exploiting the generalized approximate convexity assumptions, we investigate the relations among the solutions of approximate Minty (respectively, Stampacchia) type variational inequalities (abbreviated as, AMTVI (respectively, ASTVI)), and the local ϵ-quasi solutions of the BLPP. Moreover, by employing the generalized Knaster–Kuratowski–Mazurkiewicz (abbreviated as, KKM)-Fan’s lemma, we derive some existence results for the solutions of approximate variational inequalities (abbreviated as, AVI), namely, AMTVI and ASTVI. A non-trivial example is given to highlight the importance of the established results. To the best of our knowledge, there is no research paper available in the literature that establishes relationships between the AVI and the BLPP under the assumptions of generalized approximate convexity in terms of limiting subdifferentials.

This research investigates entrepreneurial attitudes among 415 students in the academic sports domain. Utilizing a 15-item questionnaire, participants were categorized into four groups based on their sports background: individual and team sports with competitive history, amateur athletes, and non-practitioners. The questionnaire exhibited good internal consistency (Cronbach's alpha coefficient = 0.755). Statistical analysis using the Chi-Square Test of Homogeneity across criteria such as gender, competitive sports involvement, type of competitive sports, and engagement in amateur sports revealed significant differences in nine out of 60 comparisons. Furthermore, this study employs an explanatory approach to elucidate the distinctions among athletes, amateur, and non-athlete students in academic sports programs regarding assumption of responsibilities, proactive initiative, determination to establish their own businesses, perception of the comfort zone, and the perception of post-sports career adaptation. Additionally, a gender comparison is conducted concerning the perception of business risk, comfort and security in a stable workplace, and the applicability of sports-oriented approaches in business. These results provide valuable insights into how sports backgrounds shape entrepreneurial perspectives, thereby contributing to the development of customized entrepreneurial programs. Moreover, the study seeks to offer a nuanced comprehension of the diverse factors influencing the entrepreneurial attitudes and perceptions of students in sports academic programs.

The utilization of solar energy technology is crucial for generating hydrogen in sustainable energy systems. While traditional methods involving natural gas, coal, and oil have been employed for hydrogen production, this study aims to explore environmentally friendly techniques. Green hy-drogen, despite being a more expensive option compared to fossil fuel-derived hydrogen, has prompted engineers to develop affordable and low-carbon technologies. The microgrid model was developed to showcase a self-contained DC islanded system designed to supply power to an electrolyzer, capitalizing on both a solar array and an energy storage unit. This comprehensive model offers a versatile platform for evaluating the operational dynamics involved in the sustainable production of green hydrogen. Over a span of seven days, it permits the as-sessment of hydrogen generation characteristics through the utilization of solar energy, either di-rectly from a solar array or through an integrated system that incorporates energy storage. The model encompasses a multi-domain framework, encompassing electrical, thermal liquid, and thermal gas aspects, facilitating a holistic exploration of the intricate processes underlying the green hydrogen production system. Through this simulation, the feasibility and efficiency of harnessing renewable energy sources for hydrogen production in an off-grid setting can be comprehensively examined and optimized, contributing to the advancement of sustainable energy solutions.

Dairy calves are susceptible to a great range of welfare and health issues up to the age of weaning. The aim of the current pilot study was to evaluate incidence of the main health disorders affecting dairy calves up to one year of age. The study was carried out at the Experimental Farm of the Research and Development Institute for Bovine Balotesti, Romania, were health data was collected for two consecutive years, between November 2017 and October 2019, from a number of 176 purebred Romanian Black and White calves. Diarrhea had the highest incidence in un-weaned calves (0-3months old), of 29.55±0.34%, significantly higher (p≤0.001) compared to 3-6 months (2.16±1.24) and 6-12 months age groups (5.88±2.17), respectively. Coccidiosis incidence was on average of 39.20±0.36% in un-weaned calves, 1.44±1.01% in the 3-6 months group and of 5.04±2.01% in the 6-12 months group, significantly higher (p≤0.001) in the 0-3 months age group, compared to older calves.

In the last 20 years, the share of renewable energy sources in the production of electricity in the European Union has doubled, from about 15% to almost 35%. The main driver of this development has been the increase in the share of wind energy and solar photovoltaic energy. The authors aim to analyze the influencing factors that affect the energy transition process applied to nautical tourism, from polluting energy to renewable solar energy. The authors' research approach consists in using the framework offered by the energy transition process from the perspective of the socio-technical and economic approach, by applying the qualitative research method with a deductive approach. The tool used to achieve the objective was the semi-structured interview. The research unitarily, holistically, and specifically approaches the problem of energy transition from polluting sources to renewable ones offered by solar energy, in the case of nautical tourism with direct implications on the specific industry in the Netherlands. The research results are structured in the fields of technology, governance, economics, and user preferences. This research has the potential to provide support to find optimal solutions that encourage users to accelerate the energy transition process by adopting sustainable solutions for nautical tourism.

Innovative practices in irrigation systems can bring improvements in terms of economic efficiency and in the same time can reduce environmental impact. Investment in high tech technologies frequently involves additional costs, but an efficient water management can increase the lifetime of the equipment. The main objective of this article is to reduce the energy consumption by one thousand cubic meters pumped and automatically to increase the economic efficiency of the pumping groups. This paper develops a new operating algorithm that ensures the operation of the pumping group at safe operating intervals and in the same time identifies the equivalent pump operating points for the entire flow range and pumping height of the pumping group. This methodology is based on the principles of an Expert System to perform the optimization process of the energy consumption in pumping groups. The resulting methodology avoids the combinatorial explosion of the solutions to be analyzed and determines the point of maximum efficiency without violation of any of the system constraints under any operating condition. The proposed methodology is tested on an irrigation system that includes a pumping group with 5 pumps, showing its effectiveness in obtaining the optimal solution with a relatively low computational burden.

We present the full case pictorial assay including preoperative imaging as well as the surgical correction of the uterine anomaly and associated complication of a very rare case of occult unicornuate right uterus with rudimentary non-communicating functioning left horn and its natural evolution following an initially incomplete surgical treatment.

Steel surface protection with hard coatings is essential in the metalworking industry, yet developing high-performance hard coatings still remains a challenge. Quaternary nitride coatings, particularly TiAlSiN, have been extensively studied, but commercial TiAlSiN coatings vary widely, and there is a lack of consistent data. This study presents findings on the development and evaluation of TiAlSiN and TiAlSiN/TiN thin films, with an 800 nm thick TiAlSiN top coating and a 100 nm thick TiN mid-coating. The films were deposited on C120 tool steel discs via reactive DC magnetron sputtering. Ti and TiAlSi 75–20–5 (at.%) disc-shaped targets (50.8 mm diameter × 6.3 mm thickness), fabricated by our team through spark plasma sintering, were used for the sputtering process. Coatings were grown on smooth steel substrates heated to 300 °C, resulting in a uniform micro-structure with nanoparticles of globular (TiN) or pyramidal shape (TiAlSiN), as evidenced by SEM analysis. Nanoindentation tests showed superior mechanical properties for all coatings compared to the steel substrate. Micro-scratch tests indicated better scratch resistance for TiAlSiN/TiN bilayer (BL) coatings than for TiAlSiN single-layer (SL) coatings. Electrochemical impedance spectroscopy tests in a 3.5 wt.% NaCl solution revealed that the BL coatings demonstrated superior corrosion resistance compared to the SL coatings, even after thermal aging at 800 °C for 1 hour. The superior properties of the synthesized TiAlSiN/TiN films recommend them as protective coatings for tool steel surfaces.

This work presents the results regarding the synthesis of tungsten nanoparticles (W NPs) by magnetron sputtering combined with gas aggregation (MSGA) when H2 mixed with Ar is used as working gas, the amount of H2 being increased up to 82%. The results show that up to 40% H2 in discharge the synthesis rate increases over 60 times, rapidly decreasing for over 50% H2 in discharge. The W dust is still produced in H2 dominated discharge (82%), the deposition rate being small but not negligible (20 mg/hour). The obtained WNPs are isolated, with the diameter decreasing from 50 nm to 15 nm when the amount of H2 in discharge is smaller than 41%. Over this value, the particles tend to agglomerate, forming structures similar to film-like deposits. Also, the diameter of the deposited spots on substrates is dependent on the H2 content in discharge. This allows the efficient coating of substrates with dimensions up to 26 mm by translating them in front of the MSGA cluster source exit aperture. Supplementary, for 41% H2 in discharge, the influence of synthetic air leaks (0-5%) in discharge was investigated. The deposition rate decreases rapidly (ceasing for around 4% air in discharge) and the obtained nanoparticles tend to agglomerate (at 2% air content, the dust deposit has the aspect of a near continuous film). Chemical composition investigations show a pronounced tendency of oxidation, nitridation and oxynitride formation in the presence of air leaks.

Paralyzed patients have always been ideal candidates for physiotherapy due to their body's inability to recover on its own. Regardless of the cause that led to the onset of paralysis (whether localized or generalized), physiotherapy helps these patients with devices and methods designed to restore their proper functioning of the body, as well as quality of life. Obtaining the standing position is the main stage in the therapeutic process, being the indispensable element for the entire protocol. The present study focused on the devices we developed over time, adapting them for each patient, depending on the degree of damage they presented and the possible associated pathologies. At the same time, we wanted these devices to be available for any therapist or even owner, being made of common materials, easy to find, but also affordable.

Groove pancreatitis represents a chronic focal form of pancreatitis affecting the zone between the pancreatic head and the duodenal „C” loop, known as the groove area. This is a rare condition that affects the pancreatic periampullary part, including the duodenum and the common bile duct, associated usually with long-term alcohol and tobacco misuse and being more frequent in men than in women. The most common clinical symptoms of groove pancreatitis include weight loss, acute abdominal pain, nausea, and jaundice. This report is about a 66 year old woman with a history of heavy smoking, presenting with weight loss, nausea, and upper abdominal pain. Contrast enhanced computed tomography revealed the existence of a chronic pancreatitis as well as the dilatation of the main pancreatic duct, a cyst of the pancreatic head and enlargement of the biliary tract. Conservatory treatment was initiated but with no improvement of symptoms. Since there was no indication for endoscopic retrograde cholangiopancreatography, we decided to perform a pancreatoduodenectomy, as surgery appears to be the single effective treatment.

The strong competition in the automotive industry has required manufacturers to implement lean production, both with methods and techniques specific to Industry 4.0. At the same time, universities must provide graduates with specific skills for applying these new production methods and techniques. In this context, a Lean Learning Factory was developed in the Pitesti University Center, which allows students to learn, experiment, and research, in an environment similar to that of enterprises, the new Lean Manufacturing methods and techniques, and Industry 4.0. The research presented in this study had as its objective identifying the minimum number of repetitions necessary to train operators who serve two differently organized workstations, one classic, the other including digital techniques, but on which the same assembly operation is performed. Several indicators were considered in the analysis, such as the number of errors, the number of stops, the effective duration of the work cycle, and the percentage ratio between the standard duration of cyclical activities and the effective duration of the work cycle. The evolution of these indicators was mathematically modelled by regression functions, using the least squares method. The obtained results also highlight the usefulness of applying the DOJO method as a Lean manufacturing-specific learning technique and the efficiency of implementing digital techniques in work organization.

This study examines the effectiveness of a comprehensive psychomotor development program combined with adapted football training for adolescents diagnosed with intellectual disabilities in Romania. Twelve participants, with a mean age of 17.42 years underwent a carefully designed intervention program spanning 36 weeks. The program aimed to enhance fundamental movement skills, integrate these skills into specialized football training, and culminate in a Unified 7-a-side Football Match. Results indicate significant improvements in psychomotor skills, including static and dynamic balance, pulse processing speed, and identified stimuli. Moreover, the intervention positively impacted social interaction among participants. Statistical analysis, employing Pearson Correlation Analysis and Paired Samples t-Test (One-Sample), compared assessments. Results revealed significant differences between pre- and post-intervention measurements, providing robust evidence of the program's efficacy. The positive correlations between physical parameters and social interaction highlight the interconnectedness between physical fitness and social engagement. Our findings suggest that improvements in physical abilities may contribute to increased social interaction among children with intellectual disabilities, underscoring the holistic nature of our intervention, which addresses multiple dimensions of development simultaneously. The findings underscore the holistic benefits of integrating psychomotor development and adapted football programs for adolescents with intellectual disabilities, emphasizing the importance of promoting inclusive physical activities for their overall well-being.

(1) Background: This retrospective cohort study aimed to investigate the cephalometric evaluation of facial height ratio (FHR) and growth patterns. (2) Methods: We assessed facial height ratios, Y-axis to SN angle, and growth patterns in 94 participants from Timis county using digital cephalograms. Participants were categorized based on Angle’s classification. Cephalograms were digitally traced and analyzed using WebCeph imaging software. Statistical analysis was conducted using Python version 3.11.9. (3) Results: Significant correlations were observed between FHR and craniofacial development, particularly regarding hypodivergent growth patterns. In a sample of 94, molar classes showed varying patterns: Class I—33.3% hyperdivergent, 61.5% normodivergent, 33.3% hypodivergent. Class II—50% hyperdivergent, 30.8% normodivergent, 52% hypodivergent. Class III—16.7% hyperdivergent, 7.7% normodivergent, 14.7% hypodivergent. Y-axis to SN angle values were within normal limits across groups (Group I: 65.0 (IQR: 61.2-69.0), Group II: 65.0 (IQR: 62.0-69.0), Group III: 67.0 (IQR: 59.7- 69.0). A strong negative correlation was found between Y-axis to SN angle and Jarabak’s ratio (r = -0.72, p &lt; 0.001), highlighting the need for holistic assessment methods in orthodontic practice. (4) Conclusion: Patients from Timis county predominantly exhibit a hypodivergent growth pattern across all malocclusion types. Understanding these patterns is essential for comprehensive orthodontic treatment planning. Further research is needed to explore the implications of these findings on treatment outcomes and patient care.

Highly transparent thin films with the chemical formula BaSrMgWO6 were deposited by spin coating using a solution of nitrates of Ba, Sr and Mg and ammonium paratungstate in dimethylformamide with a ratio Ba:Sr:Mg;W=1:1:1:1. XRD, SEM, EDX and XPS investigations evidenced that an annealing at 800 ºC for 1h leaves the structure amorphous with a precipitate on the surface and that a supplementary annealing at 850 ºC for 45 min forms a nanocrystalline structure and dissolves a part of precipitates. It was evidenced a textured double perovskite cubic structure (61.9%) decorated with tetragonal and cubic impurity phases (12.7 %) like BaO2, SrO2 and MgO and an under-stoichiometric phase (24.4%) with the chemical formula Ba2-(x+y) SrxMgyWO5. From transmittance measurements the values of optical band gap were estimated for the amorphous (Eg= 5.15) and nanocrystalline (Eg=4.58 eV) phases. The presence of a lattice disorder was indicated by the high values of Urbach and weak absorption tail energies A decrease in their values was observed and attributed to the crystallization process and cation redistribution.

The aim of the study was to identify the existence of positive relationships between certain psychomotor behaviors, which we consider specific to swimming, and learning the execution technique of some styles (front crawl and backstroke). The study was carried out during 10 months, including 76 children (40 boys and 36 girls) aged between 6-9 years who practice recreational swimming in a Romanian city. Several tests were used: Tapping test for manual dexterity and laterality, the Goudenough test for body schema, the Flamingo test for static balance, the horizontal buoyancy test for body balance on the water. Results indicated better ratings on all psychomotor behaviors analyzed by gender (in favor of girls compared to boys), except for laterality. The levels of all analyzed psychomotor behaviors are directly proportional to the age of the subjects. Also, moderate positive correlations of manual dexterity (rs = 0.63 in front crawl; rs = 0.57 in backstroke) and strong correlations were identified for body scheme, laterality, static balance and buoyancy, coordination with the learning of the two styles of swimming (r or rs between 0.77 and 0.85). In conclusion, psychomotor behaviors can be predictors for learning swimming styles.

Conclusions: HRCT is a valuable tool in preoperative assessment of cholesteatoma, helping in making surgical decisions. It can accurately predict the extent of disease and is helpful for detecting unapparent dangerous situations. However it is not very accurate in detecting Fallopian canal and stapes erosion.

The present study aims to evaluate the antibacterial activity of five commercially available essential oils (EOs): Lavender (LEO), Clove (CEO), Oregano (OEO), Eucalyptus (EEO), and Peppermint (PEO) against the most-known MDR Gram-positive and Gram-negative bacteria - Staphylococcus aureus (ATCC 25923), Escherichia coli (ATCC 25922) and Pseudomonas aeruginosa (ATCC 27853) - alone and in various combinations. Gas Chromatography-Mass Spectrometry (GC-MS) analysis established their complex composition. Then, the antibacterial activity was investigated in vitro by diffusimetric antibiogram method, using sterile cellulose discs with Ø 6 mm impregnated with 10 µl of sample and sterile borosilicate glass cylinders loaded with 100 µl of sample; MIC (µg/mL) for each EO was calculated from IZD values (mm) measured after 24 hours. The following EO combinations were evaluated: OEO+CEO, CEO+EEO, CEO+PEO, LEO+EEO, and EEO+PEO. Then, the influence of each dual combination on 3 conventional antibacterial drugs – Neomycin (NEO), Tetracycline (TET), and Bacitracin (BAC) - activity was investigated. The most active EOs against S. aureus and E. coli were LEO and OEO (IZD = 40 mm). They were followed by the CEO and EEO (IZD = 20-27 mm); PEO exhibited the lowest antibacterial activity (IZD = 15-20 mm). EEO alone showed the highest inhibitory activity on P. aeruginosa (IZD = 25-35 mm). It was followed by the CEO, LEO, and EEO (IZD = 7-11 mm), while PEO proved no antibacterial action against it (IZD = 0 mm). Only one synergic action was recorded (OEO+CEO against P. aeruginosa); EEO+PEO revealed partial synergism against S. aureus and CEO+PEO additive behavior against E. coli. Two triple associations with TET showed partial synergism against E. coli, and the other 2 ones (with NEO and TET) evidenced the same behavior against S. aureus; all contained EEO+PEO or CEO+PEO. Most combinations reported indifference. However, numerous cases were of antagonism between constituents included in double and triple combinations, and EOs with the strongest antibacterial activities belong to the highest antagonistic combinations. A consistent statistical analysis supports our results, showing that EOs with moderate antibacterial activities could generate combinations with higher inhibitory effects based on synergistic or additive interactions.

(1) Background: Evaluating if necrosis volumetric assessment of pre-/post-RFA in HCC can be an accurate predictor of LTP (local tumor progression) and survival.; (2) Methods: Retrospective, descriptive and analytical study conducted between 01.01.2018 - 30.09.2021 in the Radiology and Medical Imaging Department of Fundeni Clinical Institute. 35 patients, each with one LI-RADS 4 or 5 treated lesion were eligible to be included. Volumetry was performed using OsiriX MD. Initial lesion volume, ideal necrosis volume (0,5-1 cm safety margin) and actual necrosis volume at 1 and 6 months post-procedure were performed; (3) Results: Results and discussions: Actual necrosis volume is influenced by several factors: lesion position, proximity to great vessels or other critical structures. The overall recurrence-free survival rate was similar to data in other studies (77% in the first year post-RFA). This study showed that having the actual necrosis volume at 1 month smaller than ideal necrosis volume is a good predictor for local tumor progression (p &lt; 0,05); (4) Conclusions: Volumetric assessment of necrosis is easily attainable and can help improve prediction of local tumour progression.

The Siret River crosses NE Romania from the north to the south and it discharges into the Danube, near the city of Galati. During the period, 17^th June - 10^th July 2010, significant amounts of precipitations in the mountainous basin of Siret were recorded. The floods comprised two periods with four bimodal cycles and they were counted among the strongest on the Romanian territory. The exceptional floods occurred in the rivers of Siret, Suceava, Moldova, Bistrita, Trotus and so on. The most important compound flood wave was determined by the precipitations which fell within the period, 29^th June to 1^st July 2010, when significant amounts of rain were recorded, sometimes, exceeding 80 mm. The high discharges on the Bistrita River – downstream from the Bicaz Reservoir – were controlled by complex hydro technical works. The maximum discharge for the year 2010 summer floods was recorded at Dragesti hydrometric station: 2,884 m³/s (historic discharge) compared to the preceding historic discharge of the year 2008 (2,850 m³/s). The effects of floods were strongest in the counties of Suceava, Neamt, and Bacau. The floods on the main course of the Siret River were analyzed in correlation with the tributaries within the mountainous sector.

The recovery and recycling of metals that generate toxic ions in the environment is of particular importance, especially when these are tungsten and, in particular, thorium. The radioactive element thorium has unexpectedly accessible domestic applications (filaments of light bulbs and electronic tubes, welding electrodes, working alloys containing aluminum and magnesium), which lead to its appearance in electrical and electronic waste from municipal waste management platforms. The current paper proposes the simultaneous recovery of waste containing tungsten and thorium from welding electrodes. The simultaneous recovery is done by applying a hybrid membrane electrolysis technology coupled with nanofiltration. An electrolysis cell with sulphonated polyether–ether–ketone membranes (sPEEK) and a nanofiltration module with chitosan-polypropylene membranes (C–PHF–M) are used to carry out the hybrid process. The analysis of welding electrodes led to a composition of: W (tungsten) 89.4%; Th 7.1%; O2 2.5% and Al 1.1%. Thus, the parameters of the electrolysis process were chosen according to the speciation of the three metals suggested by the superimposed Pourbaix diagrams. At a constant potential of 20.0 V and an electrolysis current of 1.0 A, the pH is varied and the possible composition of the solution in the anodic workspace is analyzed. Favorable conditions for both electrolysis and nanofiltration were obtained at pH from 6 to 9, when the soluble tungstate ion, the aluminum hydroxide and solid thorium dioxide were formed. Through a first nanofiltration, the tungstate ion is obtained in the permeate, and thorium dioxide and aluminum hydroxide in the concentrate. By adding a pH 13 solution over the two precipitates, the aluminum is solubilized as sodium aluminate which will be found after the second nanofiltration in permeate, the thorium dioxide remaining integrally (within an error of ±0.1ppm) on the C–PHF–M membrane.

Background: Given the potential for additional development to clarify a better knowledge of the overall impact of COVID-19 on the pediatric population, the clinical symptoms of SARS-CoV-2 infection in children and adolescents are still being explored. Morbidity in children is characterized by a variable clinical course. Our study's goal was to compare clinical aspects of 230 pediatric patients who tested positive for SARS-CoV-2 and were hospitalized between April 2020 and March 2022. Methods: In a retrospective analysis, we compared two groups hospitalized in the infectious diseases clinical ward IX at the National Institute for Infectious Diseases "Prof. Dr. Matei Bals," Bucharest, Romania. The first group of 88 patients was admitted between (April–December 2020) and their clinical manifestations were compared with the second group of 142 children followed between July 2021 and March 2022. Results: Of 230 children, the median age was 4.5 (interquartile range 0.6-17) years, 53.9% were male. 88 (36.21%) patients (first group) were admitted during the second wave in Romania, mostly aged < 5 years old, and experienced digestive manifestations like fever (p=0.001), and diarrhoea (p=0.004). The second group experienced different clinical signs when compared with the first group, with higher temperature and increased respiratory symptoms analogous to those of acute respiratory viral infections. The proportion in the second group increased, and 64.5% had symptoms for a median interval of 5 days; age (0-4 -years old) and length of stay were both proportionally inversely (p<0.01) and with correlation with hospital admission (p = 0.04). We report two Paediatric Inflammatory Multisystem Syndrome (PIMS) in the second group, with favourable evolution under treatment. Comorbidities were risk factors for complications appear (p < 0.001) in both groups. All paediatric cases admitted to our clinic evolved favourably and no death was recorded. Conclusions: In the first group children experienced digestive symptoms, whereas the second group experienced mild and moderate respiratory symptoms. We confirmed risk factors for severe cases as manifestations across the age spectrum, 0-4 (digestive symptoms) and 5-12 years old (for respiratory symptoms), associated comorbidities, fever, and male gender. The potential effects of COVID-19 infection in children older than 5 years should encourage caregivers to vaccinate and improve the prognosis among pediatric patients at risk.

The sustainable development of innovative eco-friendly multifunctional nanocomposites, possessing superior characteristics, is a noteworthy topic. Novel semi-interpenetrated nanocomposite films based on poly(vinyl alcohol) covalently and thermally crosslinked with oxalic acid (OA), reinforced with a novel organophosphorus flame retardant (PFR-4) derived from co-polycondensation in solution reaction of equimolar amounts of co-monomers, namely, bis((6-oxido-6H-dibenz[c,e][1,2]oxaphosphorinyl)-(4-hydroxyaniline)-methylene)-1,4-phenylene, bisphenol S, and phenylphosphonic dichloride, in a molar ratio of 1:1:2, and additionally doped with silver-loaded zeolite L nanoparticles (ze-Ag), have been prepared by casting from solution technique. The morphology of the as prepared PVA-oxalic acid films and their semi-interpenetrated nanocomposites with PFR-4 and ze-Ag was investigated by scanning electron microscopy (SEM), while the homogeneous distribution of the organophosphorus compound and nanoparticles within the nanocomposite films has been introspected by means of energy dispersive X-ray spectroscopy (EDX). It was established that composites with a very low phosphorus content had noticeably improved flame retardancy. The peak of the heat release rate was reduced up to 55%, depending on the content of the flame retardant additive and the doping ze-Ag nanoparticles introduced into the PVA/OA matrix. The ultimate tensile strength and elastic modulus increased significantly in the reinforced nanocomposites. Considerably increased antimicrobial activity was revealed in the case of the samples containing silver-loaded zeolite L nanoparticles.

In the paper, a coordinated control methodology of single-phase (1-P) end-users switching oper-ations on the phases of an active electric distribution network (AEDN) has been proposed to ob-tain a minimum unbalance degree at the coupling common point (CCP) level with the main dis-tribution system. The phase load balancing (PLB) process considers the smart devices that switch from one phase to another phase the 1-P end-users (consumers and prosumers) to compensate for the phase load unbalance. The proposed methodology has been tested successfully in an AEDN belonging to a Romanian Distribution Network Operator (DNO) containing 114 end-users (104 consumers/10 prosumers) integrated into the Smart Metering System (SMS). The op-timal solution leads to a value of the objective function by 1.00004, represented by the unbalance factor, very close to the ideal target, 1.00. A comparative analysis was conducted considering other possible PLB cases (the consumer-level PLB and prosumer-level PLB), obtaining similar values of the UF (1.027 vs. 1.028), slightly higher than in the hybrid-level PLB. Also, the signifi-cant technical benefits were quantified through an energy-saving of 58.73% and decreasing the phase voltage unbalance rate by 91 % compared to the initial case (without PLB). These results emphasized the positive impact of the proposed coordinated control methodology on the PLB process and evidenced its effectiveness and applicability in the AEDNs.

Systemic sclerosis (also known as scleroderma) is a chronic fibrosing autoimmune disease with both skin and multisystem organ involvement. Scleroderma has the highest mortality among all rheumatic diseases. The pathophysiology mechanism of systemic sclerosis is a progressive self-amplifying process, which implicates the widespread microvascular damage, followed by a dysregulation of innate and adaptive immunity and inflammation, and diffuse fibrosis of the skin and visceral organs. Fibrosis of internal organs is a hint for systemic sclerosis, moreover associated with interstitial lung disease (SSc-ILD) is a complex process. We report a case of a 56 years old female, diagnosed with Systemic Sclerosis 16 years ago. The systemic and clinical manifestations, respiratory functional tests, radiological aspects and specific therapy were discussed.

This study evaluates the effectiveness of an integrated vestibular rehabilitation program in improving balance, motor control, and proprioceptive function in patients diagnosed with Benign Paroxysmal Positional Vertigo (BPPV). The prospective observational study involved 107 participants who underwent a tailored rehabilitation regimen, including the Epley maneuver, Brandt-Daroff exercises, and balance and proprioceptive training. The program was designed to address the vestibular and proprioceptive deficits caused by BPPV, with the goal of restoring normal function and reducing the risk of symptom recurrence. Dynamic Gait Index (DGI) and Balance Beam Test were used to assess progress, showing significant improvements in balance stability and dynamic motor function. The findings support the integration of vestibular rehabilitation into standard care for BPPV patients, highlighting the program's potential to enhance patient outcomes and reduce recovery time. However, the study also notes limitations such as the lack of a control group and the need for further research to explore the long-term effects of such interventions.