(1) Background: tuberculosis (TB) is considered one of the leading causes of death by a single in-fectious agent worldwide. This study aimed to identify hotspots of people diagnosed with tu-berculosis and abusive use of alcohol, tobacco and other drugs in communities through a geo-spatial intelligence application; (2) Methods: ecological study with a spatio-temporal approach. We considered tuberculosis cases diagnosed and registered in the Notifiable Diseases Information System, which presented information on alcoholism, smoking, and other drugs. Spatial Variations in Temporal Trends (SVTT) and scan statistics were applied for the identification of Hotspots; (3) Results: of 29.499 cases of tuberculosis were identified. And when we applied the STTT for al-coholism, three Hotspots were detected, one of which was protective (RR: 0.08 – CI95%: 0.02 – 0.32) and two at risk (RR:1.42 – CI95%: 1.11 – 1.73; RR: 1.39 - CI95%: 1.28 – 1.50). Regarding smoking, two risk clusters were identified (RR: 1.15 - CI95%: 1.01 – 1.30; RR: 1.68 - CI95%: 1.54 – 1.83). For other drugs, a risk cluster was found (RR: 1.13 - CI95%: 0.99 – 1.29) and two protections (RR: 0.70 - CI95%: 0.63 – 0.77; RR: 0.76 – CI95%: 0.65 – 0.89); (4) Conclusions: it was evidenced in the communities a problem of TB and drug addiction. Use disorder perhaps in a person's brain and behavior and leads to an inability to continue their treatment, putting the community at risk for TB.

Tributyltin (TBT) is an environmental contaminant present on all continents, including Antarctica, with a potent biocidal action. Its use began to be intensified during the 1970s, being effectively banned in 2003, but remaining in the environment to this day due to several factors that increase its half-life and misuse despite the bans. In addition to the endocrine disrupting effect of TBT, that may lead to imposex induction in some invertebrate species, there are several studies that demonstrated that TBT also has an immunotoxic effect. The immunotoxic effects that have been observed experimentally in vertebrates using in vitro and in vivo models involve different mechanisms, but mainly alterations in the expression and/or secretion of cytokines. In this review, we summarize and update the literature on the impacts of TBT on the immune system, as well as discuss what still needs to be done to fill the knowledge gaps regarding the impact of this endocrine disrupting-chemical on immune system homeostasis.

In this work, nine fruits cultivated in the northern Amazon were studied: abiu, acerola, araçá, bacupari, biribá, caçarí, fruta-do-conde, graviola and taperebá, with the objective of carrying out a bromatological and nutritional study of the pulps of fruits studied. Of all of them, are the pulps of graviola (76.83 ± 0.02 kcal 100 g^-1) bacupari (76.83 ± 0.02 kcal 100 g^-1) and fruta-do-conde (46.66 ± 0.02 kcal 100 g^-1). Among the macronutrients, the high concentration of potassium stands out, especially in the graviola (541.16 ± 0.24 mg 100 g^-1) and the biribá (468.21 ± 0.13 mg 100 g^-1). Among the micronutrients, iron concentrations are representative for araçá pulp (3.04 ± 0.02 mg 100g-1), abiu is rich in zinc (3.71 ± 0.02 mg 100 g^-1) and manganese (6.61 ± 0.11 mg 100 g^-1). The presence of cobalt at the level of traces in some of the pulps studied stands out. The Pearson correlation coefficient was evaluated, as well as the statistical treatment by multivariate analysis PCA to establish the correlation between the variables studied.

The supply of mental health processes in primary care has gaps. This study aims to analyze the association of agreement criteria and flows between primary care teams and the Family Health Support Center (NASF) for mental health collaborative care, considering the difference between capital and non-capital cities in Brazil. This cross-sectional study was conducted based on secondary data from the Primary Care Access and Quality Improvement Program. Agreement criteria and flows were obtained from 3883 NASF teams of the matrix support or collaborative care. The Chi-square test and multiple Poisson regression were used; p < 0.05 was considered statistically significant. Prevalence ratios of negative associations demonstrated protective factors for support actions: follow-up at Psychosocial Care Center, management of psychopharmacotherapy, offer of other therapeutic actions, care process for users of psychoactive substances, and offer of activities to prevent the use of psychoactive substances. Collaborative care in primary care was effective, and capital cities were a protective factor compared with non-capital cities.

The atherosclerosis, a chronic and inflammatory disease that occurs when there are high levels of low-density lipoprotein (LDL) on plasma. This important risk factor for development of cardiovascular disease (CVD) is the main cause of death worldwide. MicroRNAs have recently emerged as potential biomarkers and therapeutic target for lipid metabolism disorders. In this review, we will provide profile of surrounding miRNAs that have demonstrated being regulators of PCSK9, LDLR and APOB100 genes. Recent work has identified the mir-148, mir-128, mir-27a/b, mir-185, mir-301, mir-130 as important regulators of this pathway because they decrease supply of LDL receptors through interaction with PCSK9. Inhibition of LDLR expression cause elevation of plasma LDL levels which induces atherosclerosis. While mir-30c, mir-122, mir-34 decrease MTTP, which promotes degradation of APOB100 preventing assembly and secretion of VLDL. We conclude that, when overexpressed, mir-148a, mir128 and mir-27a/b, mir-122 and mir-34 are related to decrease in LDLR, facilitating occurrence of atherosclerosis. While mir-30 has been linked to decreased atherosclerosis. Detection of miRNAs profile could be used in the future as a biomarker for disturbs linked to c-LDL uptake and in future anti-miRNAs therapies may be used in the treatment of atherosclerosis.

Shear thickening fluids (STF) are a class of fluids whose viscosity significantly rises under external loads. The research on these fluids has been advancing in recent years regarding prospective practical applications, including developing impact-absorbing composites. Following the green agendas governments and legislators advocate, this study investigates the combination of STF and other sustainable materials. Cork is a naturally occurring cellular material with a negative carbon footprint and superior energy absorption properties. With varying concentrations of STF material, cork agglomerates were formed. Notably, the analysed blends are homogeneous, contrasting with previous literary works. A series of experiments were conducted in quasi-static and dynamic conditions to determine the various mechanical responses. STF appears to influence the mechanical behaviour of cork agglomerates by providing softer deceleration rates and dispersing more energy through disaggregation mechanisms.

This systematic review investigates the failure rate and marginal bone loss (MBL) of dental implants placed in Solid-organ transplant (SOT) patients compared to healthy controls. Three databases (PubMed, Web of Sciences and the Cochrane Library) were searched up to June 2020 (PROSPERO CRD42019124896). Case-control and cohort studies reporting data failure rate and marginal bone loss (MBL) of dental implants placed in SOT patients were included. The risk of bias of observational studies was assessed through the Newcastle-Ottawa Scale (NOS). Four case-control studies fulfilled the inclusion criteria, all of low risk of bias. Meta-analyses revealed consistently lower implant failure rate than control populations at patient and implant levels. SOT patients had a significant difference of -18% (p-value <0.001) of MLB towards healthy patients. SOT status poses no serious threat to implant survival. Overall, this group of patients presented lower levels of dental implant failure rate and marginal bone loss compared to otherwise healthy patients. Further intervention trials with wider sample size and longer follow-ups are necessary to confirm these summary results.

Native plants from the Brazilian Amazon Biome are rich in nutrientes, oils and fats and, therefore, represent a very important regional food resource. Althoung there is a global interest in the nutritional potential of tropical fruits, the potential of Amazonian fruits as source of essential fatty acids is still under exploited, since their composition is still understudied. ¹H Magnetic Resonance Nuclear (¹H NMR) is a robust spectroscopic tool to profile fatty acids components in oils. The objectives of this work were to use ¹H NMR to determine the fatty acids profile and the physicochemical properties of crude oils and fats obtained from fruits of Brazilian Amazon: açaí, ata-brava, bacaba, buriti, buritirana, murici amarelo, murici vermelho, piaçaba braba, tucumanzinho, pupunha red and yellow varieties. Oils were obtained by Soxhlet extraction using hexane as a solvent. After solvent removal by rotoevaporation, the resulting oils and fats were analyzed by ¹H NMR spectroscopy. Unsaturated fatty acids oleic (ω9), linoleic (ω6) and linolenic (ω3) acids were quantified in the oils and their physicochemical properties were determined. It was observed that the oils have predominately ω9 fatty acids, followed by ω6 and ω3 representatives. The physicochemical properties confirmed edibility and good quality of oils and fats present in the aforementioned Amazonian fruits.

This study aimed to investigate the healing effect of advanced platelet-rich fibrin (A-PRF) clot membranes in the reduction of palatal wounds resulting from free gingival graft (FGG) harvesting, in the re-epithelization rate and in the pain experience after surgery. Twenty-five patients requiring soft tissue augmentation (gingival recession coverage or keratinized gingiva augmentation) participated in this prospective randomized clinical study. After FGG harvesting, the test group (n=14) received A-PRF clot membranes at the palatal wound and the control group (n=11) a gelatin sponge. Epithelialization rate of the palatal wound, wound healing area, correspondent percentage of reduction and post-surgical pain experience were assessed. The follow-up period was 90 days. There was a significantly higher reduction of the palatal wound area in the A-PRF group vs. the control group, at 7 (p<0.001), 14 (p=0.009) and 30 days (p<0.001) follow-up. The maximum difference between groups was attained at 30 days (91.5% for A-PRF vs. 59.0% for the control group). At 14 days a significant difference in the proportion of patients showing total epithelization was found: 64.3% for A-PRF vs. 9.1% for the control group (p=0.012). At 90 days, both groups showed total recovery. Overall, the control group experienced a higher level of pain and discomfort until the 14th day, being significantly higher on the second day (p=0.013). The results suggest that A-PRF membranes haste the healing process by promoting a greater reduction along the recovery period and an apparent less painful postoperative period.

This retrospective study aimed to investigate the effect of known risk factors on nonsurgical periodontal treatment (NSPT) response using a pocket depth fine-tuning multilevel linear model (MLM). Thirty-seven patients (24 males and 13 females) with moderate to severe chronic periodontitis were treated with nonsurgical periodontal therapy. Follow-up visits at 3, 6, and 12 months included measurement of several clinical periodontal parameters. Data were extracted from a database system. Probing depth (PD) and Clinical Attachment Loss (CAL) reductions after NSPT in an overall of 1416 initially affected sites (baseline PD ≥ 4 mm), distributed on 536 teeth, were analyzed against known risk factors at three hierarchical levels (patient, tooth and site). The variance component models fitted to assess the three-level variance of PD and CAL decrease for each post-treatment follow-up showed that all levels contributed significantly to the overall variance (P < 0.001). Patients that underwent NSPT and were continually monitored had very curative results. All three hierarchical levels included risk factors who had impact on the to influence the magnitude of PD and CAL reduction. Specifically, the tooth’s type, surfaces involved and teeth mobility site-level risk factors showed the highest influence on these reductions, being highly relevant factors for the NSPT success.

Abstract: (1) Background: tuberculosis presents an epidemiological trend towards inequality, especially among people in social exclusion and situations of vulnerability. To analyze territories where there is a concentration of people diagnosed with tuberculosis, in a street situation, and who make chronic use of alcohol, tobacco, and illicit drugs. We will also analyze trends in this health condition in southern Brazil; (2) Methods: Ecological study, developed in the 399 municipalities of Paraná, Southern Brazil, with all tuberculosis cases in the homeless population registered in the Information System of Notifiable Diseases between 2014 to 2018. For data analysis, we used descriptive statistics, for the time series, the Prais-Winsten autoregression method, whereas for spatial analysis, we used the Getis-Ord Gi technique*; (3) Results: in total, 560 cases were reported. We found a predominance of alcohol, smoking, and illicit drugs users, with an increasing trend in the state and clusters of spatial risk in the East health macro-region; (4) Conclusions: We observed territories with critical levels of highly vulnerable people who use psychoactive substances and are in a street situation. The results highlight the importance of incorporating public policies of social protection to these individuals and resolutive health services that receive and assist in eradicating TB.

Background: The progression of periodontal diseases at national Portuguese level and its public awareness are of great interest, mainly due to the high burden of periodontitis. Objectives: To evaluate the prevalence progression of periodontal diseases in Portugal and correspondent public awareness, between 2004 and 2017, by using data from the Global Burden of Disease (GBD), Directorate-General of Health (DGH) and Google® Trends (GT). Methods: For the period 2004-2017, Portuguese national data of periodontal diseases prevalence were searched in the Institute for Health Metrics and Evaluation of GBD and DGH and for public awareness, GT comparison tool between Portuguese words for “Periodontitis”, “Gingivitis”, “Gums” and “Periodontal disease” trends was used. Results: For the period 2004-2017, the overall prevalence of periodontitis slightly increased from 11.3% to 11.7%. During that period the GT search term “Gums” (“Gengivas”) was the most relevant. It increased steadily over time while the search term “Periodontal disease” (“Doença periodontal”) decreased, being these search trends significantly correlated (

Traumatic Brain Injury represents a significant public health concern due to its role in traumatic death and disability, often caused by head impacts or rapid accelerations. Despite advancements in Finite Element Head Models, existing models primarily represent adult males, neglecting anatomical and physiological differences between genders and age groups. Additionally, the mechanistic roles of specific intracranial tissues, such as the dura mater, have conventionally been overlooked. To better understand the mechanical behavior of the brain and its injured regions in the context of TBI, including the dura mater, this study proposes the development of a Female Finite Element Head Model. This model, representative of a middle-aged female subject, was developed using medical image-derived geometry and finite element modeling techniques. The validation results demonstrate a similarity between the numerical displacement curves and those obtained experimentally. In the model with dura mater, the numerical results show analogous behavior to the experimental results, despite minimal variations in the amplitude of the curves. These advancements highlight the significance of including the dura mater in biomechanical brain modeling. Incorporating the dura mater in Finite Element Head Models produces more realistic results than models without it. This emphasizes the importance of enhancing biomechanical models to better represent anatomical complexity.

Among the many Lysosomal Storage Disorders (LSDs) that would benefit from the establish-ment of novel cell models, either patient-derived or genetically engineered, is Mucopolysaccha-ridosis type II (MPS II). In fact, even though a specific therapeutic approach does exist for this disorder (Enzyme Replacement Therapy, ERT, with recombinant human IDS) and haematopoiet-ic stem cell transplantation (HSCT) may also hold promise whenever the disorder is diagnosed soon enough, both approaches have their own drawbacks. Here we present our results on the establishment and characterization of two MPS II pa-tient-derived stem cell line(s) from deciduous baby teeth. To the best of our knowledge, this is the first time a stem cell population is isolated from LSD patient samples obtained from the oral cavity. Taking into account our results on the molecular and biochemical characterization of those cells and our first insights on their subcellular MPS phenotype, we consider these cells will be a valuable tool for both pathophysiological assessments and drugs screenings. Ultimately, we believe patient-derived dental pulp stem cells (DPSC) may represent a feasible alternative to induced pluripotent stem cells (iPSC) in many labs with standard cell culture con-ditions and limited (human and economic) resources.

In bone tissue engineering, ceramics have been the choice due to their excellent biological properties. But the paradigm changed with the discovery of bioactive glasses (BGs) in 1969 by Larry Hench and co-workers, due to their ability to bond to living tissues through the formation of an interfacial bone-like hydroxyapatite layer when the bioglass was put in contact with biological fluids in vivo. Among a number of tested compositions, the one exhibiting the highest bioactivity index is the well-known trademarked 45S5 Bioglass®. The topic received increasing attention particularly after 1985 when this material entered in the market of biomedical devices, inspiring many other investigations aiming at further exploring the in vitro and in vivo performances of this BG, or developing other related BG compositions. The research efforts gradually revealed a number of shortcomings of 45S5 Bioglass®, mostly derived from its high sodium content, initially intended to decrease the melting temperature and accelerating the degradation of the silicate network over time. But the extensive release of sodium from 45S5 Bioglass® in the biological fluids creates a high pH cytotoxic environment. Other serious drawbacks include a fast degradation rate, and a poor sintering ability, which hinders the reliable fabrication of porous scaffolds. Therefore, sol-gel was regarded as an attractive alternative to prepare alkali-free BG compositions. The process uses inorganic and/or organic precursors, which undergo hydrolysis and condensation at room-temperature, being less costly. When properly conducted, the sol-gel process might result in amorphous structures with all the components intimately mixed at the atomic scale. Moreover, developing new better performing materials for bone tissue engineering is a growing concern, as the ageing of the world’s population leads to lower bone density and osteoporosis. This work describes the sol-gel synthesis of a novel quaternary silicate-based BG with the composition 60 SiO2 – 34 CaO – 4 MgO – 2 P2O5 (mol%) was prepared using acidified distilled water as single solvent. By controlling the kinetics of the hydrolysis and condensation steps, an amorphous glass structure could be obtained. The results of XRD of samples calcined within the temperature range from 600-900 ºC demonstrated that amorphous nature was maintained until 800 ºC, followed by partial crystallization at 900 ºC. The specific surface area, an important factor in osteoconduction, was also evaluated over different temperatures, ranging from 160.6 ± 0.8 m2/g at 600 ºC down to 2.2 ± 0.1 m2/g at 900 ºC, being accompanied consistent changes in average pore size and agreeing pore size distribution. The immersion of the BG particles in simulated body fluid (SBF) led to the formation of an extensive apatite layer on its surface. These overall results indicate the proposed material is very promising for biomedical applications in bone regeneration and tissue engineering.

This study explores the impact of temperature and molarity on the pyrolysis of Açaí seeds (Euterpe Oleraceae, Mart.) activated with KOH on the yield of bio-oil, hydrocarbon content of bio-oil, antioxidant activity of bio-oil and chemical composition of aqueous phase. The experiments were carried out at 350, 400, and 450 °C and 1.0 atmosphere, with 2.0 M KOH, and at 450 °C and 1.0 at-mosphere, with 0.5 M, 1.0 M and 2.0 M KOH, in laboratory scale. The composition of bio-oils and aqueous phase determined by GC-MS, while the acid value, a physical-chemical property of fundamental importance in biofuels, of bio-oils and aqueous phases by AOCS methods. The antioxidant activity of bio-oils determined by the TEAC method. The solid phase (biochar) characterized by X-ray diffraction (XRD). The diffractograms identified the presence of Kalicinite (KHCO3) in bio-char, and those higher temperatures favor the formation peaks of Kalicinite (KHCO3). The pyrolysis of Açaí seeds activated with KOH show bio-oil yields from 3.19 to 6.79 (wt.%), aqueous phase yields between 20.34 and 25.57 (wt.%), solid phase yields (coke) between 33.40 and 43.37 (wt.%), and gas yields from 31.85 to 34.45 (wt.%). The yield of bio-oil shows a smooth exponential increase with temperature. The acidity of bio-oil varied between 12.3 and 257.6 mgKOH/g, decreasing exponentially with temperature, while that of aqueous phase between 17.9 and 118.9 mgKOH/g, showing and exponential decay behavior with temperature, demonstrating that higher temperatures favor not only the yield of bio-oil but also bio-oils with lower acidity. For the experiments with KOH activation, the GC-MS of bio-oil identified the presence of hydrocarbons (alkanes, alkenes, cycloalkanes, cycloalkenes, and aromatics) and oxygenates (carboxylic acids, phenols, ketones, and esters). The concentration of hydrocarbons varied between 10.19 to 25.71 (area.%), increasing with temperature, while that of oxygenates from 52.69 to 72.15 (area.%), decreasing with temperature. For the experiments with constant temperature, the concentrations of hydrocarbons in bio-oil in-crease exponentially with molarity, while those of oxygenates decrease exponentially, showing that higher molarities favor the formation of hydrocarbons in bio-oil. The antioxidant activity of bio-oils decreases with increasing temperature, as the content of phenolic compounds decreases, and de-creases with increasing KOH molarity, as higher molarities favors the formation of hydrocarbons. Finally, it can be concluded that chemical activation of Açaí seeds with KOH favors the not only the yield of bio-oil but also the content of hydrocarbons. The study of process variables is of utmost importance in order to clearly assess reaction mechanisms, economic viability and design goals that could be derived from chemically activated biomass pyrolysis processes.

Textile and clothing is one of the most important industrial sectors, not only due to the significant number of jobs generated, but also because it addresses one of the people’s fundamental needs (clothing). It is, however, a sector with a huge environmental impact, all over the world, and also an important social impact, especially in developing countries. Sustainability in the Textile &amp; Clothing value chain is a known issue, concerning both environmental, and economical-social facets of sustainability. One way to improve sustainability in this sector is by measuring the environmental, economic and social impacts of value chain activities and, ultimately, computing an Environmental and Circular score for each batch of textile and clothing product, and an Economical and Social score for each involved firm, reflected in their products. The consumer will then have the opportunity and responsibility for selecting products with the least negative environmental, economical and social impact. This article presents the results of STVgoDigital project - PPS1, developed in Portugal with the aim of implementing the traceability of textile and clothing products, boosting sustainability in this sector, and preparing the ground for the implementation of the circular economy. More exactly, a blockchain-based textile and clothing value-chain traceability platform is presented, for tracing textile product lots and activities, along the value chain, classifying them with a score, which measures their environmental and social impact. The environmental, economic and social impact scores are based on a set of proposed indicators. The results are assessed through the presentation of a case study of a face towel (home textile) and a case study of a T-shirt (clothing).

There is growing recognition of the adverse effects of body image dissatisfaction (BID) and eating disorder (ED) symptoms on adolescent health. The aim of this study was to estimate the prevalence of ED symptoms, BID, and their relationship in adolescents from public schools in Southern Brazil. A total of 782 schoolchildren (male: n=420, female: n=362); age: 15 ± 0,4 years) answered a self-administrated questionnaire to identify sociodemographic data. Children´s Figure Rating Scale was adopted to identify body image and Eating Attitudes Test (EAT-26) was applied to investigate ED symptoms. Inferential statistics and hierarchical model-controlled logistic regression were used for association between variables. Most of the schoolchildren reported being satisfied with their bodies. However, we observed a higher prevalence of dissatisfaction among girls for being overweight and thinness among boys. Female students and students from schools located in the central area of the city showed higher chances of developing ED symptoms, and the absence of symptoms of ED appeared to act as a protective factor against BID in schoolchildren. Results of this study show the need to reflect on these factors that influence the development of ED and non-acceptance of their own body in a population concerned with their physical appearance.

Whilst prior works have characterised the affordances of prototyping methods in terms of generating knowledge about a product or process, the types, or ‘dimensions’ of knowledge towards which they contribute are not fully understood. In this paper we adapt the concept of ‘design domains’ as a method to interpret, and better understand the contributions of different prototyping methods to design knowledge in new product development. We first synthesise a set of ten dimensions for design knowledge from a review of literature in design-related fields. A study was then conducted in which participants from engineering backgrounds completed a Likert-type questionnaire to quantify the perceived contributions to design knowledge of 90 common prototyping methods against each dimension. We statistically analyse results to identify patterns in the knowledge contributions of different methods. Results reveal that methods exhibit significantly different contribution profiles, suggesting different methods to be suited to different knowledge generation. Thus, this paper indicates potential for new methods, methodology and processes to leverage such characterisations for better selection and sequencing of methods in the prototyping process.

Organophosphate pesticides (OPs) are toxic substances that contaminate aquatic environments, interfere with the development of the nervous system, and induce Neurodevelopmental Toxicity (NDT) in animals and humans. The canonical mechanism of OP neurotoxicity involves the inhibi-tion of acetylcholinesterase (AChE), but other mechanisms non-AChE are also involved and not fully understood. We used network toxicology and molecular docking to identify molecular targets and toxicity mechanisms common to OPs. Targets related to diazinon-oxon, chlorpyrifos oxon, and paraoxon OPs were predicted using the Swiss Target Prediction and PharmMapper databases. Targets related to NDT were compiled from GeneCards and OMIM databases. In order to construct the protein-protein interaction (PPI) network, the common targets between OPs and NDT were imported into the STRING. Networks topological analyses identified EGFR, MET, HSP90AA1, and SRC as hub nodes common to the three OPs. Using Reactome pathway and gene ontology we found that signal transduction, axon guidance, cellular responses to stress, and glutamatergic signaling activation play key roles in OP-induced NDT.

Glycerol is a subproduct of biodiesel production and represents an important problem when generated in large scale. Alternatives that can utilize this unrefined byproduct is of potential interest. It is herein described the synthesis of a series of 1,2,3-triazoles using glycerol as starting material. The key step involved in the preparation of triazolic derivatives corresponded to the Copper(I)-catalyzed Azide-Alkyne Cycloaddition (CuAAC), also known as click reaction, between 4-(azidomethyl)-2,2-dimethyl-1,3-dioxolane (3) and different terminal alkynes. The eight prepared derivatives were evaluated with regard to their fungicide, phytotoxic and cytotoxic activities. The fungicide activity was assessed in vitro against Colletotrichum gloeosporioides, the causing agent of papaya anthracnose. It was found that the compounds 1-(1-((2,2-dimethyl-1,3-dioxolan-4-yl)methyl)-1H-1,2,3-triazol-4-yl)cyclohexanol (4g) and 2-(1-((2,2-dimethyl-1,3-dioxolan-4-yl)methyl)-1H-1,2,3-triazol-4-yl)propan-2-ol (4h) demonstrated high efficiency on controlling C. gloeosporioides when compared to the commercial fungicide tebuconazole. The triazoles did not present any phytotoxic effect when evaluated against Lactuca sativa. However, five derivatives were mitodepressive, inducing cell death detected by the presence of condensed nuclei and acted as aneugenic agents in the cell cycle of L. sativa. It is believed that glycerol derivatives bearing 1,2,3-triazole functionalities may represent a scaffold to be explored toward the development of new agents to control C. gloeosporioides.

Metallic masters can be used as a metallic mold to replicate polymeric pieces with high resolution. Metallic masters with high resolution were created by photolithography technique and nickel electrodeposition technique. AZ 9260 photoresists and SPR 220-7.0 photoresists were used to coat metallic substrates and to compare results. Steel substrate and nickel substrate were used as the metallic substrate to compare results. Two different nickel electrodeposition protocols were used to compare results. In the conclusion section, was determined the best photoresist, metallic substrate, and nickel electrodeposition protocol to fabricate metallic masters.

Background: Evidences on the effects of chemotherapy treatment cycles on measures of muscle, mental state, social and cognitive performance are scarce. Objective: To analyze the effects of chemotherapy cycles on muscle strength and activation, functional capacity, quality of life, fatigue and anxiety of women with breast cancer. Methods: Twenty-two women divided into a treatment group (n = 10; 46.6 ± 9.6 years) and control group (n = 12; 51.6 ± 7.0 years) participated in the study. Analysis of muscle performance, quality of life, fatigue and anxiety after the 2nd and 4th cycle of chemotherapy with anthracyclines and cyclophosphamide were performed in women with breast cancer (TRA) and compared to healthy women (CTR). Two-way ANOVA was used to compare the variance of the means and the significance level was set as p≤0.05. Results: Differences were found in the muscular activation of the vastus medialis between the groups at post time (p = 0.038), as well as in the sit and stand test in the baseline (p<0.001) and post moment (p<0.001). Functional capacity performance was different between baseline (p<0.001) and post-time (p<0.001) groups. Additionally, the TRA group worsened the quality of life in the domains of functional capacity (p<0.001) and limitation of physical aspects (p=0.002), besides presenting negative changes in fatigue. Conclusion: Anthracycline and cyclophosphamide chemotherapy cycles reduce muscular performance and affect biopsychosocial variables in women with breast cancer.

The global trade and transportation sectors heavily rely on the maritime industry. Still, its dependence on fossil energy sources poses significant environmental challenges and leads to unstable fuel prices that affect the cost of goods transported by sea. This paper aims to evaluate the viability of seaports as energy-intensive entities and explore the feasibility of implementing a Nuclear-Renewable Hybrid Energy System (NRHES). The study presents a case study of the Tanjung Priok Port in Indonesia, focusing on estimating energy consumption, emissions, and the potential impact of carbon taxation on seaport operations. By quantifying these factors, the research provides insights into the energy requirements, environmental effects, and potential costs associated with seaport carbon taxation. A comprehensive analysis of the technical and economic feasibility of implementing an NRHES in the seaport case study is conducted, determining the optimal sizing and composition of components, considering the proportion of nuclear and renewable energy sources. Additionally, the economic analysis considers energy costs, net present cost, cash flow, return on investment, and internal rate of return. The findings aim to inform decision-makers about the benefits and challenges of adopting an NRHES, contributing to a cleaner and more sustainable future for the maritime industry.

Hydrogels are water-absorbing polymers that can hydrate forage plants in the soil. The objec-tive was to evaluate the replacement of synthetic hydrogels derived from petroleum by biode-gradable hydrogels in Mombaça grass pastures (Megathyrsus maximum). The experimental treat-ments consisted of: No hydrogel (NH); Synthetic commercial hydrogel (CH), made from a syn-thetic polyacrylamide product; and Biodegradable test hydrogel (TH), obtained from cashew gum (Anacardium occidentale). The experimental design was randomized blocks with five replica-tions and three treatments. Morphogenesis, production, chemical and mineral composition of the Mombaça grass pasture were assessed. The data was subjected to analysis of variance and mean comparison by the Snott-Knott test at 5% probability. Leaf elongation rate was 42.3 mm day-1 in the TH treatment, which was higher (P<0.05) than NH (35.0 mm day-1). Green leaf mass yield was higher in TH in comparison to NH and CH. On the other hand, there was no effect of hydration on chemical composition. The mineral composition of Mombaça grass showed more Zn when TH was used. It can be concluded that biodegradable hydrogels can replace synthetic commercial hydrogels in pastures.

Background: Changes in body weight are associated with the regulation of DNA methylation (DNAm). In this study, we investigated the associations between maternal gestational weight gain-related DNAm and foetal and neonatal body composition. Methods: Brazilian pregnant women from the Araraquara Cohort Study were followed up during pregnancy, delivery, and after hospital discharge. Women with normal pre-pregnancy BMI were allocated to two groups: adequate gestational weight gain (AGWG, n=45) and excessive gestational weight gain (EGWG, n=30). Foetal and neonatal body composition was evaluated by ultrasound and plethysmography, respectively. DNAm was assessed in maternal blood using Illumina Infinium MethylationEPIC BeadChip arrays. Linear regression models were used to explore the associations between DNAm and foetal and neonatal body composition. Results: Maternal weight, GWG, neonatal weight, and fat mass were higher in the EGWG group. Analysis of DNAm identified 46 differentially methyl-ated positions and 11 differentially methylated regions (DMRs) between the EGWG and AGWG groups. Nine human phenotypes were enriched for these 11 DMRs located in 13 genes (EMILIN1, HOXA5, CPT1B, CLDN9, ZFP57, BRCA1, POU5F1, ANKRD33, HLA-B, RANBP17, ZMYND11, DIP2C, TMEM232), highlighting the terms insulin resistance, and hyperglycaemia. Maternal DNAm was associated with foetal total thigh and arm tissues and subcutaneous thigh and arm fat, as well as with neonatal fat mass percentage and fat mass. Conclusion: The methylation pat-tern in the EGWG group indicated a risk for developing chronic diseases and involvement of ma-ternal DNAm in foetal lean and fat mass and in neonatal fat mass.

Osteomyelitis is a significant cause of total carcass condemnation in pigs at the slaughterhouse. The decision for total condemnation of a pig carcass for osteomyelitis is often based on traditional perceptions of the risk of pyemia, leading to controversy among Official Veterinarians (OV) in the industry. This review aims to provide a more comprehensive understanding of the etiopatho-genesis of osteomyelitis in pigs, the microorganisms involved, and the risk factors. It also high-lights the urgent need for a more uniform method to evaluate osteomyelitis cases, which could significantly reduce economic losses in the industry. Lesions originating from tail-biting, tail docking, castration, teeth resection, and raw management are described as risk factors for oste-omyelitis. Osteomyelitis is caused by the entry of pathogens into the bloodstream of the animal through an open wound. The most described pathogens are Trueperella monocytogenes, Staphylo-coccus aureus, and Streptococcus spp. At slaughter, OVs condemn carcasses with osteomyelitis due to pyemia. Signs of acute disease are essential to identify pyemia cases. In chronic cases, total carcass condemnation can be avoided depending on the number of lesions and number of vertebrae af-fected. A clear overall image of the problem would help authorities in various countries adopt a more homogenous approach.

Iodide is an essential micronutrient present in very small quantities in the human body, with a fundamental action for the adequate synthesis of thyroid hormones, which are critical for cell differentiation, growth and metabolism. In the form of iodide, iodine is widely distributed in the environment, although in an irregular manner, occurring in abundant amounts in the oceans and in coastal areas and scarcely found on islands and mountains. The diet is the main source of iodine, whose intake varies according to the amount present in soil and water and according to eating habits. Governmental policies have been adopted to satisfy and guarantee the necessary daily supply of iodine, such as fortification of industrialized salt for domestic iodine consumption or addition to the bread commonly consumed in a given region, or the offer of iodized oil to the population, or even iodine supplementation through medications. Iodide deficiency is the main avoidable cause of brain damage to fetuses and children, as well as retardation of psychomotor development. Thyroid hormones are almost universally involved in the development and proliferation of fetal neural tissue. Permanent lesions of the cerebral cortex, hippocampus and cerebellum may occur, with loss of, or damage to the brainstem or spinal cord, affecting cortical areas that integrate highly specialized stimuli, which become poorly defined on an anatomical basis, including silent areas of the associative cortex. One of the more significant metabolic problems due to dietary iodine deficiency is the presence of goiter (increased volume of the thyroid gland). Thyroid carcinoma is the most frequent endocrine neoplasia affecting the human species and plasma iodine concentration is related to the development of specific subtypes of this neoplasia. An increased prevalence of follicular carcinoma, a more aggressive tumor, has been observed in areas of iodine deficiency, while the correction of this deficiency is associated with a higher prevalence of papilliferous carcinoma, a less aggressive form. CONCLUSION: An ideal plasma iodide concentration is necessary to insure the proper mental development of fetuses and young children and to minimize the aggressiveness of thyroid cancer from follicular cells in humans.

In a 1.5°C warmer world, the Northeastern (NE) South America’s ecosystems will experience more severe droughts, associated with decreasing rainfall. The severity of flash drought events based on vegetation and surface soil moisture has not been identified over the Caatinga ecosys-tem. This study aimed to characterize the impact of flash drought events on vegetation response via soil moisture over NE South America during the first two decades of the 2000s. Three drought indices were used to characterize flash droughts: the Standardized Difference Vegetation Index (SDVI) derived from Meteosat Second Generation (MSG), the Standardized Precipitation Index (SPI) from ground-data, and the Surface Soil Moisture (SSM) product-based Soil Moisture and Ocean Salinity (SMOS). Results revealed dramatic impacts of flash drought events on vegetation dynamics that caused abrupt changes in the regional vegetation phenology. The regional patterns of flash drought events in 2012 over NE South America were identified and had a severe impact on its Caatinga-like vegetation-dependent moisture response. In 2012, anomalously long dry spells with negative rainfall anomalies in the non-rainy season and persistent on vege-tation greenness and rapidly decreased soil moisture were prominent, thus identifying NE South America to the impacts of flash drought events. Additionally, the results from the trends analysis of radiance fluxes estimated from the MSG satellites over 18 years revealed that an overall drying trend in the NE South America semiarid ecosystem during the last two decades. Here, flash drought events were identified as the conse-quent rainfall deficiency at SPI-3< −1 for a period of five consecutive weeks or more, which the soil moisture content dropping from the 40th percentile to below the 20th percentile, with the NDVI lower than 0.30 unit. These results could be useful to guide flash-droughts early warning systems in NE South America.

68Ga-based radiopharmaceuticals are routinely used for PET imaging of multiple types of tumors tumours. Gallium-68 is commonly obtained from 68Ge/68Ga generators, which are limited in the quantity of activity produced. Alternatively, gallium-68 can easily be produced on a cyclotron using liquid targets. In this study we optimized the GMP production of [68Ga]GaFAPI-46 using gallium-68 produced from a standard medical cyclotron using liquid targets. Starting from the published synthesis and quality control procedures described for other 68Ga-based radiopharmaceuticals, we have validated the synthesis process and the analytical methods to test the quality parameters of the final product to be used for routine clinical studies. [68Ga]GaFAPI-46 was successfully produced with high radiochemical purity and yield using an IBA Synthera® Extension module. Gallium chloride was cyclotron produced on a medical cyclotron using a liquid target with an activity of 4.31 ± 0.36 GBq at the end-of-purification (EOP). Analytical methods were established and validated meeting Ph. Eur. standards. Fully GMP production was also validated in three consecutive batches, producing 2.50 ± 0.46 GBq of [68Ga]Ga-FAPI-46 at the end-of-synthesis (EOS), with 98.94 ± 0.72% radiochemical purity by radio-HPLC. Quality was maintained for up to 3 h after the EOS. Production of [68Ga]GaFAPI-46 was performed and validated using a standard medical cyclotron with liquid targets. Quality control parameters (e.g. sterility, purity, and residual solvents) conform to Eur. Phar. and shelf life of 3 h was established. Activity of [68Ga]GaFAPI-46 produced is substantially higher than the one obtained with generators enabling a better response to the clinical need for this radiopharmaceutical.

Ruderal plants designate native or exotic plant species that grow spontaneously in anthropized environments, being important from the ecological succession perspective. The present study aimed to identify ruderal plants that occur in an anthropized area of the Campus Floresta of the Federal University of Acre (UFAC), in the municipality of Cruzeiro do Sul, in the Southwest Amazon. Toward this end, botanical material was collected and herborized, and identified based on consultation of the specialized literature, virtual herbariums, and by comparison with the Campus Floresta Herbarium (CFCZS) collection. Finally, these data were incorporated to the referred collection, according to the usual plant systematics procedures. The results revealed 28 species and 28 genera, distributed in 14 families. The most representative families were Fabaceae, Malvaceae and Poaceae, with four species each; followed by Asteraceae with three; Cyperaceae, Rubiaceae and Amaranthaceae with two each; and the others, Plantaginaceae, Ochnaceae, Urticaceae, Verbenaceae, Iridaceae, Lamiaceae and Dennstaedtiaceae with one species each. The occurrence of predominant species in planted pastures, agricultural use, and mining area ecosystems is highlighted, such as Pteridium aquilinum (L.) Kuhn., Andropogon bicornis L., and Crotalaria micans Link.

Aimed to obtain purple garlic varieties, 360 bolting bulbs from the Protected Geographical Indication (PGI) “Las Pedroñeras” were selected for their size, and the presence of abundant external scales. After a further selection, 243 out of the 360 bulbs were discarded due to undesired characteristics, as light purple color, high number of small cloves, cloves affected by Fusarium spp. and mites, among other. It was stablished that each bulb would give rise to a family. Thus, 117 families were planted under a random design during season 2021-2022. Either physiological, morphological and phenological traits were assessed for each family, and the affectations by pest and pathogens were also controlled. After the assessment of this trial, 103 out 117 families remained in the program, and were used for the establishment of a second trial the next season. Unlike the first trial, after the evaluations only 23 families remained in the program. There was observed a high variability for most of traits, with a great influence of families. The phenotypic behavior of families was significative influenced by environment, highlighting the need of their assessment under different environmental conditions. The high variability registered for the target sample, opens the possibility to select new garlic varieties from this PGI.

COVID-19, the infectious disease caused by SARS-CoV-2, has spread on a pandemic scale. The virus infection can evolve asymptomatically or generate severe symptoms, influenced by the presence of comorbidities. Lymphopenia in patients affected with COVID-19 according to the severity of symptoms is frequent. However, the profile of CD4+ and CD8+ T-cells regarding cytotoxicity and antiviral factor expression has not yet been completely elucidated in acute SARS-CoV-2 infections. The purpose of this study is to evaluate the phenotypic and functional profile of T-lymphocytes in patients with moderate and severe/critical COVID-19. During this pandemic period, we analyzed a cohort of 62 confirmed patients with SARS-CoV-2 (22 moderate cases and 40 severe/critical cases). Albeit lymphopenia, we observed an increase in the expression of CD28, co-stimulator molecule, and activation markers (CD38 and HLA-DR) in T-lymphocytes as well as an increase in the frequency of CD4+ T-cells, CD8+ T-cells, and NK cells that express the immunological checkpoint protein, PD-1, in patients with severe/critical condition compared to healthy controls. Regarding the cytotoxic profile of peripheral blood mononuclear cells, an increase in the response of CD4+ T-cells already at baseline level was observed, scarcely changed upon PMA and Ionomycin stimulation. Meanwhile, CD8+ T-lymphocytes decreased cytotoxic response, evidencing a profile of exhaustion in patients with severe COVID-19. As observed in the t-SNE technique CD4+ T-cytotoxic and CD8+ T with low granzyme production evidencing their dysfunctionality in severe/critical conditions. In addition, purified CD8+ T-lymphocytes from patients with severe COVID-19 showed an increased constitutive expression of differentially expressed genes associated with the caspase pathway, inflammasome, and antiviral factors, and curiously, reduced expression of TNF-α. The cytotoxic profile, by CD4+ T-cells, may compensate for the dysfunction/exhaustion of TCD8+ in acute SARS-CoV-2 infection. These findings may provide an understanding of the interplay of cytotoxicity between CD4+ T-cells and CD8+ T-cells in the severity of acute COVID-19 infection.

The integration of the Internet of Things (IoT) and Distributed Computer Systems (DCS) is transforming business models across industries. IoT devices enable real-time monitoring of equipment and processes, reducing downtime and enhancing efficiency. In the case, manufacturing companies use IoT sensors to monitor machinery, predict failures, and schedule maintenance. Also, automation via IoT, reduces manual intervention, resulting in boosted productivity in smart factories and automated supply chains. IoT devices generate thus vast amounts of data, which businesses analyze to gain insights into customer behavior, operational inefficiencies, and market trends. In turn, distributed computer systems process this data, providing actionable insights and enabling advanced analytics and machine learning for future trend predictions. While, IoT facilitates personalized products and services by collecting data on customer preferences and usage patterns, enhancing satisfaction and loyalty, IoT devices support new customer interactions, like wearable health devices, and enable subscription-based and pay-per-use models in transportation and utilities. Conversely, real-time monitoring enhances security, as distributed systems quickly respond to threats, ensuring operational safety. It also aids regulatory compliance by providing accurate operational data. In this way, this study, through a Bibliometric Literature Review (LRSB) of 91 screened pieces of literature, aims at ascertaining to what extent the aforementioned capacities enhance business models. The study concludes that those systems leverage businesses, promoting competitive edge, continuous innovation, and adaptability to market dynamics. A review of 91 academic documents from the Scopus database highlights these impacts.

The increasing adoption of student-centred learning environs by the institutions of higher education in business, has led to new mechanisms and methodologies such as the Simulation-Based Learning (SBL), Problem-Based Learning (PBL) and Challenge-Based Learning (CBL). Literature has shown evidence of raising interest in these methodologies towards a more experiential paradigm with regard to upcoming events from the surrounding real-world context. This paper presents a Systematic Bibliographic Literature Review (SBLR) with respect to the integration and application of these innovative and collaborative methodologies in higher education. It aimed to identify its relevant advantages, challenges, and consequences for the future of business education. Bibliographic databases were searched for documents published up to May 2024 to categorize key topics discussed in the literature on SBL, PBL and CBL. The review process identified 89 empirical and non-empirical papers on SBL, PBL and CBL, business related paperwork, which resulted from the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) method. PRISMA is a framework with evidence-based data designed to help authors perform a systematic literature review. Data analysis revealed diverse subthemes for those methodologies uses in business higher education institutions. The research questions “What are the advantages, challenges and implications of SBL, PBL and CBL altogether, in the training of business students?” guided the study. The central output of the research is the discovery of the varying uses of SBL, PBL and CBL overall, to cope with diverse demands arising within environmental context. Future research directions are suggested.

The Covid-19 pandemic has resulted in the closure of schools at every level, globally, forcing education to move online. Meeting the needs of students online for Science Lab classes, in particular, is a challenge since the physical labs are not available to the teachers or students. OLabs is a virtual Science Lab providing a complete learning environment of theory, experimental procedures, videos, animations, simulations, and assessments that capture real lab experiences with the relevant pedagogy. This study looks at the acquisition and behaviors of users, on the OLabs platform, during pre and Covid-19 times. Using Google Analytics, we observe that, during the pandemic time, users increasingly adopted OLabs as a new learning pedagogy for performing experiments as indicated by parameters like the number of users; the number of unique pages viewed per session; time spent on viewing content; bounce rate; and preference for content types such as theory, simulations, videos, and animations.

The augmenting commitment in the entrepreneurial learning process, both at academic and industry level, has led to new mechanisms and methodologies. Entrepreneurship literature has shown evidence of raising interest in the problem-based learning (PBL) methodology with regard to upcoming events from the surrounding learning context. This paper presents a Systematic Bibliographic Literature Review (SBLR) with respect to the application of PBL throughout distinct entrepreneurial processes either in higher education, or in industry. It aimed to identify relevant entrepreneurial opportunities for PBL. Bibliographic databases were searched for documents published between 2002 and May 2024 to categorize key topics discussed in the literature on PBL and entrepreneurship. The review process identified 142 empirical and non-empirical papers on entrepreneurship related PBL. Data analysis revealed diverse subthemes for PBL uses in entrepreneurship in both higher education institutions and industry. The research questions “What is the interplay of problem-based learning methodology with entrepreneurship?” guided the study. The central output of the research is the discovery of the varying uses of PBL to cope with diverse events arising within entrepreneurship context. Future research directions are suggested.

Background. Until now, cost of allergy treatment in insured public health care system and non-insured self-financing private health care system in Indonesia has not been well documented and published, as well as the cost of allergy treatment with subcutaneous immunotherapy. Objective. To evaluate the clinical and cost benefits of allergic rhinitis treatment in children with subcutaneous immunotherapy in non-insured self-financing private health care system. Methods. A retrospective cohort study conducted from 2015 until 2020, compared clinical improvement and health care costs over 18 months in newly diagnosed AR children who received SCIT versus matched AR control subjects who did not receive SCIT, with each group consisting of 1,098 subjects Results. Decrease of sp-HDM-IgE level (kU/ml) from 20.5 + 8.75 kU/ml to 12.1 + 3.07 kU/ml had been observed in the SCIT group. To reduce the symptom score of allergic rhinitis by 1.0 with SCIT it costs IDR 21,753,062.7 per child, for non SCIT it costs IDR 104,147,878.0 per child. Meanwhile, to reduce the medication score (MS) by 1.0 with SCIT it costs Rp. 17,024,138.8 while with non SCIT it costs Rp. 104,147,878.0. Meanwhile, to lower combination symptoms and medication score (CSMS) by 1.0, with SCIT it costs IDR 9,550,126.6, while with non SCIT it costs IDR 52,073,938.9. Conclusion. In conclusion, this first Indonesia-based study demonstrates substantial health care cost savings associated with SCIT for children with AR in an uninsured private health care system and provides strong evidence for the clinical benefits and cost-savings benefits of AR treatment in children.

This research work uses a simplified approach to combine location information from beacons propagation signal interaction with a mobile device with local building information to give real-time location and guidance to a user inside a building. This is an interactive process with visualisation information that can help user’s orientation inside unknown buildings and the data stored from different users can provide useful information about users movements inside a public building. Beacons installed on the building at specific pre-defined position emit signals that give a geographic position with an associated imprecision, related with Bluetooth’s range. This uncertainty is handled by building layout and users’ movement in a developed system that maps users’ position, gives guidance and store user movements. This system is based on an App (Find Me!) for Android OS (Operating System) which captures the Bluetooth Low Energy (BLE) signal coming from the beacon(s) and shows, through a map, the location of the user ‘s smartphone and guide him to the desired destination. Also, the beacons can deliver relevant context information. The application was tested by a panel of new and habitual campus users against traditional wayfinding alternatives yielding navigation times about 30% smaller, respectively.

The access to cardiac rehabilitation (CR) is contingent upon physician referrals, yet these are often inadequate, particularly in low-resource settings. This multi-method study aimed to translate, culturally adapt, and validate the Portuguese version of the Provider Attitudes toward CR and Referral (PACRR-P) scale, as well as to identify key factors influencing CR referral in a Latin American context for the first time. The PACRR was translated into Brazilian-Portuguese through a rigorous process involving independent translation, back-translation, and expert panel review to ensure face, content, and cross-cultural validity. A total of 44 Brazilian physicians completed the questionnaire, allowing for an assessment of internal consistency, criterion validity, and convergent validity. The findings confirmed the face, content, and cultural validity of the 20 translated items, with a mean item clarity rating of 4.8/5. The final version included 17 of the original 19 PACRR-P items, with a Cronbach’s alpha of 0.73. Referral rates were significantly associated with specific PACRR-P items, supporting the scale's criterion validity, while correlations with ReCaRe scores further supported convergent validity. The most prominent barriers to referral were a lack of familiarity with CR site locations, absence of a standard referral form, and lack of automatic referral processes. The PACRR's validity and reliability among Portuguese-speaking providers are preliminarily supported.

The transportation sector is a significant source of greenhouse gas emissions. Electric vehicles (EVs) have gained popularity as a solution to reduce emissions, but the high load of charging stations poses a challenge to the power grid. Nuclear-Renewable Hybrid Energy Systems (N-RHES) present a promising alternative to support fast charging stations, reduce grid dependency, and decrease emissions. However, the intermittent problem of renewable energy sources (RESs) limits their application, and the synergies among different technologies have not been fully exploited. This paper proposes a predictive and adaptive control strategy to optimize the energy management of N-RHES for fast charging stations, considering the integration of nuclear, photovoltaics, and wind turbine energy with a hydrogen storage fuel cell system. The proposed dynamic model of a fast-charging station predicts electricity consumption behavior during charging processes, generating probabilistic forecasting of electricity consumption time-series profiling. Key performance indicators and sensitivity analyses illustrate the practicability of the suggested system, which offers a comprehensive solution to provide reliable, sustainable, and low-emission energy to fast-charging stations while reducing emissions and dependency on the power grid.

This comprehensive review is devoted to an under-exploited family of phenolic compounds, the coumarins, and the most relevant strands in which they are involved in some spirit beverages – wine spirit, brandy, whiskey, sugar cane spirits (rum and cachaça) and grape marc spirit – with great importance worldwide in terms of production, trade and consumption. It gathers the key discoveries on the topic considering the production process of each spirit beverage, the related sources of coumarins (different kinds of wood used in the ageing stage) along with the factors that govern them and can influence the sensory properties of the aged beverages. An overview of the analytical methods available for their identification/quantification is also included, as well as the corresponding trends for the advancement of knowledge in this field. Moreover, the remarkable role of coumarins as nutraceuticals, their importance as chemical markers for authenticity purposes, and their relationship with food safety of these spirit beverages are also addressed, highlighting the current gaps and issues, and providing clues for future research.

Product Development Process is widely known among industry and automobile companies. With the advance of technology and the need to improve product efficiency, many companies have been applying Lean Thinking principles. Their benefits lead those companies to implement their concepts and tools, like Value Stream Design in Indirect Areas, Obeya, Just-in-time (JIT) which is based on the production control system developed and implemented by Toyota. This article describes the case study of the implementation of Lean Product &amp; Process Development (LPPD) on the current Product Development Process (PDP) in an automotive company. The PDP was created by the organization and adapted from Advanced Product Quality Planning (APQP). The main findings were a Value Stream Design model of an improved PDP as a useful and successfully contribution for the company. These improvements reduced the product development lead time from 700 days to 369 days. The process efficiency increased from 68% to 85%. The communication and transparency between the cross-functional team (CFT) was improved and show promise for achieving a successful launch of new products.

Defectively manufactured and deliberately damaged composite laminates fabricated with different continuous reinforcing fibres (respectively, carbon and glass) and polymer matrices (respectively, thermoset and thermoplastic) were inspected in magnetic resonance imaging equipment. Two pulse sequences were evaluated during non-destructive examination conducted in saline solution-immersed samples to simulate load-bearing orthopaedic implants permanently in contact with biofluids. The orientation, positioning, shape, and especially the size of translaminar and delamination fractures were determined according to stringent structural assessment criteria. The spatial distribution, shape, and contours of water-filled voids were sufficiently delineated to infer the amount of absorbed water if thinner image slices than this study were used. The surface texture of composite specimens featuring roughness, waviness, indentation, crushing, and scratches was outlined, with fortuitous artefacts not impairing the image quality and interpretation. Low electromagnetic shielding glass fibres delivered the highest, while electrically conductive carbon fibres produced the poorest quality images, particularly when blended with thermoplastic polymer, though reliable image interpretation was still attainable.

Ménière's disease (MD) has an unclear cause. The microvascular dysregulation of the inner ear has been increasingly pointed as a potential contributor. This study investigates the prevalence of cardiovascular risk factors (CVRFs) in MD patients compared to those with posterior circulation cerebral infarction (POCI). CVRFs like hypertension, diabetes, dyslipidemia, obesity, coronary heart disease, and smoking were assessed in both MD and POCI patients. Brain MRI identified POCI etiology as "small vessel occlusion" (SVO) or "other etiology" (OE). The study included 64 MD and 84 POCI patients. Compared to MD, POCI OE showed a higher prevalence of CVRFs across various age groups, including hypertension, diabetes, dyslipidemia, and smoking. Notably, the odds of having POCI OE were significantly higher for individuals with hypertension and smoking. On the other hand, POCI SVO showed similar prevalence of CVRFs compared to MD. This study reveals no significant difference in CVRF prevalence between MD and smaller vessel POCI. However, a clear distinction emerges when comparing MD to POCI with involvement of larger blood vessels. Further research is needed to confirm these findings and explore potential shared risk factors between POCI (SVO) and MD.

We consider an $N$ fermion system at low temperature $T$ in which we encounter special particle number values $N_m$ exhibiting special traits. These values arise in focusing attention upon the degree of mixture (DM) of the pertinent quantum states. Given the coupling constant of the Hamiltonian, the DMs stay constant for all $N$-values, but experience sudden jumps at the $N_m$. For a quantum state described by the matrix $\rho$, its purity is expressed by $Tr \rho^2$ and then the degree of mixture is given by $1 - Tr \rho^2$, a quantity that coincides with the entropy $S_q$ for $q=2$. Thus, Tsallis entropy of index two faithfully represents the degree of mixing of a state, that is, it measures the extent to which the state departs from maximal purity . Macroscopic manifestations of the degree of mixing can be observed through various physical quantities. Our present study is closely related to properties of many-fermion systemsn that are usually manipulated at zero temperature. Here we wish to study the subject at finite temperature. Gibbs' ensemble is appealed to. Some interesting insights are thereby gained.

: The objective of this study was to obtain different dry matter contents and proportions of mel-on plant biomass for silage making. A completely randomized design was adopted with a facto-rial scheme (3 x 2) in four replications. The first factor corresponded to three mixtures of melon biomass on as fed basis (AF) of plant (branch + leaf) and fruit (harvested melon) as follows: 100% plant, 90% plant + 10% fruit, and 100% fruit. The other factor corresponded to the ensiled materi-al with fresh and dehydrated melon plant biomass (40% DM) which was dried in the field, after harvest. Silages with partial dehydration of the biomass available after fruit harvest with 0% and 10% fruit showed the greatest DM values: 297 and 293 g/kg DM, respectively. Silages with 0, 100 and 10% fruit showed medium LAB populations: 5.79, 5.14 and 4.58 logs CFU/g, respectively. Higher concentrations of acetic acid contents were observed in silages with 0 and 10% fresh fruit, which were 14.9 and 14.1 g/kg DM, respectively. Silages with 0% and 100% of dehydrated fruit showed better results for the indicators of good-quality silage. Dehydration improves the fer-mentative profile and quality of the melon silage.

Natural polysaccharides, which are described in this study, are some of the most extensively used biopolymers in food, pharmaceutical and medical applications, because they are renewable and have a high level of biocompatibility and biodegradability. The fundamental understanding required to properly exploit polysaccharides potential in the biocomposite, nanoconjugate, and pharmaceutical industries is depended on detailed research of these molecules. Polysaccharides are preferred over other polymers because of their biocompatibility, bioactivity, homogeneity, and bioadhesive. Natural polysaccharides have also been discovered to have excellent rheological and biomucoadhesive properties, which may be used to design and create a variety of useful and cost-effective drug delivery systems. Polysaccharide-based composites derived from natural sources have been widely exploited due to their multifunctional properties, particularly in drug delivery systems and biomedical applications. These materials have achieved global attention and are in great demand because to their biochemical properties, which mimic both human and animal cells. Although synthetic polymers account for a substantial amount of organic chemistry, natural polymers play a vital role in a range of industries, including biomedical, pharmaceutical, and construction. As a consequence, the current study will provide information on natural polymers, their biological uses, food and pharmaceutical applications.Keywords: Polymers Biopolymers, Excipient, Natural source, Food and Pharmaceutical applications.

In recent years, the advances in sperm morphology and genetic analyses in Perumytilus purpuratus allowed to suggest two evolutionary scenarios for this mussel: 1) the scenario of cryptic species and 2) the scenario of incipient or in progress speciation. To a better understanding of the evolutionary history of P. purpuratus, we performed an extensive sampling effort along a latitudinal gradient of ca. 7,180 km of coastline, from Southern Pacific to Atlantic Oceans and, we have also gone deeper in sperm morphology in P. purpuratus, exploring its association with phylogeny and population genetics to contrast if variability in sperm traits between northern and southern regions are signals of cryptic or incipient species. Overall, our results showed three sperm morphotypes and genetic structure in males of P. purpuratus strongly correlated. Additionally, we found evidence of a genetic admixture between lineages suggesting an introgressive hybridization zone at 38°S. These findings suggest the hypothesis that P. purpuratus is under incomplete reproductive isolation, with the presence of mechanisms of postzygotic isolation between lineages and, therefore, under an incipient or in fraganti speciation process. Finally, we discovered a new long morphotype for this species restricted to southern localities. Overall, our results support the hypothesis of historical events and postglacial recolonization as causal phenomena for the observed divergences.

India is ranked 5th in world in terms of Covid-19 publications accounting for 6.7% of the total. About 60% of the Covid-19 publications in the year 2020 are from United States, China, UK, Italy, and India. We present a bibliometrics analysis of the publi-cation trends and citation structure along with identification of major research clusters. By performing network analysis of authors, citations, institutions, key-words, and countries, we explore semantic associations by applying visualization techniques. Our study shows lead taken by United States, China, UK, Italy, India in Covid-19 research may be attributed to the high prevalence of Covid-19 cases in those countries witnessing the first outbreak and also due to access to Covid-19 data, access to labs for experimental trials, immediate funding, and overall support from the govt. agencies. Large number of publications and citations from India are due to co-authored publications with countries like United States, UK, China, and Saudi Arabia. Findings show health sciences with highest the number of publications and citations, while physical sciences and social sciences and humanities counts were low. A large proportion of publications fall into the open access category. With India as focus, by comparing three major pandemics SARS, MERS, Covid-19 from biblio-metrics perspective, we observe much broader involvement of authors from multiple countries for Covid-19 studies as compared to SARS and MERS. Finally, by applying bibliometric indicators, we see an increasing number of sustainable develop-ment-related studies from the Covid-19 domain, particularly concerning the topic of good health and well-being. This study allows for a deeper understanding on how the scholarly community from a populous country like India pursued research in the midst of a major pandemic which resulted in closure of scientific institutions.

Many neurodegenerative diseases are directly related to the formation of toxic protein aggregates, such as Parkinson’s and Alzheimer’s diseases, which are associated with the aggregation of alpha-synuclein (α-syn) and beta-amyloid (Aβ ), respectively. In this context, protein fibrils are the hallmark of these neurodegenerative diseases. In this sense, planning or designing compounds that are capable of preventing or reducing the formation of protein aggregation in the brain can be of fundamental importance for the curative treatment of these diseases. This work presents an in silico and experimental study to investigate the inhibitory potential of the ligands Octovespin (bioinspired by the wasp venom Polybia Occidentalis) and Fraternine-10 (bioinspired by the wasp venom Parachartergus fraternus wasp) against the aggregation of fibrils of the peptides Aβ(17-42) and α-syn, respectively. Using molecular docking and molecular dynamics simulations with 100 ns, the disaggregation capacity of these ligands was studied. The results obtained indicate that Octovespin and Fraternine-10 interact with the Aβ and α-syn protein fibrils throughout the simulation time. The RMSD values and the interactions with amino acids responsible for fibril aggregation demonstrate that both Octovespin and Fraternine-10 have a significant disaggregation potential, which corroborates the observations in vitro and in vivo. Furthermore, experimental results of Fraternine-10 demonstrate an anti-aggregation effect, indicating that it can promote the disaggregation of fibrils and prevent them from aggregating again to form oligomers. These discoveries qualify these molecules as potential candidates to become medicines against Parkinson’s and Alzheimer’s diseases.

Exploring therapeutic options is crucial in the ongoing COVID-19 pandemic caused by SARS-CoV-2. Nirmatrelvir, a potent inhibitor targeting the SARS-CoV-2 Mpro, shows promise as an antiviral treatment. Additionally, Ivermectin, a broad-spectrum antiparasitic drug, has demonstrated effectiveness against the virus in laboratory settings. However, its clinical implications are still debated. Using computational methods such as molecular docking and 100 ns molecular dynamics simulations, we investigated how Nirmatrelvir and Ivermectin interact with SARS-CoV-2 Mpro(A). Calculations using density functional theory have been instrumental in elucidating the behavior of isolated molecules, primarily by analyzing the frontier molecular orbitals. Our analysis revealed distinct binding patterns: Nirmatrelvir formed strong interactions with amino acids like MET49, MET165, HIS41, HIS163, HIS164, PHE140, CYS145, GLU166, and ASN142, showing stable binding with a root mean square deviation (RMSD) of around 2.0 Å. On the other hand, Ivermectin interacted with THR237, THR239, LEU271, LEU272, and LEU287, displaying an RMSD of 1.87 Å, indicating enduring interactions. Both ligands stabilized Mpro(A), with Ivermectin showing stability and persistent interactions despite forming fewer hydrogen bonds. These findings offer detailed insights into how Nirmatrelvir and Ivermectin bind to the SARS-CoV-2 main protease, providing valuable information for potential therapeutic strategies against COVID-19.

Tyrosinases (TYR) play an important role in oxidizing phenols and catechols, leading to the formation of catechols and ortho-quinones, respectively. In mammals, TYR catalyzes the conversion of L-Tyrosine to quinone, a pivotal step in melanogenesis, which generates melanin pigments responsible for protecting against UV radiation and oxidative stress. Given TYR's importance in melanin-related disorders and cosmetic applications, the inhibition of TYR has garnered attention for controlling melanin production. However, current inhibitors like hydroquinone, arbutin, and kojic acid (KA) have limitations in terms of side effects and effectiveness. A novel class of TYR inhibitors featuring arylpiperidine and arylpiperazine components has demonstrated potent inhibitory activity. This study presents a computational analysis of these inhibitors using molecular docking, molecular dynamics (MD) simulations, and the Linear Interaction Energy (LIE) method was used to estimate binding free energies. The arylpiperidine and arylpiperazine inhibitors exhibit remarkable stability within the TYR active site during simulations. The van der Waals interactions are notably sustained, indicating effective inhibition mechanisms. The results from LIE calculations closely align with experimental binding affinities. In summary, these results contribute to the understanding of TYR inhibition and underscore the potential of arylpiperidine and arylpiperazine derivatives as effective agents for modulating melanin production in both cosmetic and pharmaceutical applications. Overall, this study sheds light on the intricate interactions between inhibitors and TYR, opening avenues for the development of novel therapies and interventions.

In the last decades we have experienced great social, cultural, and educational changes, spending more time performing tasks in near vision and less hours in outdoor activities, having more overexposure to digital screens, especially the youngest and increasingly from younger ages. It is common to see cases when performing tasks in near vision the posture or position of the head is not adequate, especially the youngest, being essential to have a correct posture of the head to avoid visual, muscular, or articular problems. We present a procedure to try to control the correct position of the head in real time when performing close-up activities. The aim is to detect the inclination of the head and to know if a bad position is adopted due to a visual problem or simply to inadequate visio-postural habits, warning us of the postural anomaly to correct it.

Hybrid methods are a suitable option to extract dietary patterns associated with health outcomes. This study aimed to identify dietary patterns of Brazilian adults (20-59 years old; n=28,153) related to dietary components associated with the risk of obesity. Data from the 2017-2018 Brazilian National Dietary Survey were analyzed. Food consumption was obtained through 24-hour recall. Dietary patterns were extracted using partial least squares regression. The selected response variables were energy density (ED), percentage of total fat (%TF), and fiber density (FD). In addition, 32 food groups were established as predictor variables. The first dietary pattern, named as energy-dense and low-fiber (ED-LF), included with positive factor loadings: solid fats, breads, added-sugar beverages, fast foods, sauces, pasta, and cheeses, and with negative factor loadings: rice, beans, vegetables, water, and fruits. Higher adherence to the ED-LF dietary pattern was observed for individuals >40 years old, from urban areas, in the highest income level, who were not on a diet, reporting away-from-home food consumption, and having ≥1 snack/day. Eating patterns with similar characteristics are often associated with an increased risk of obesity. The results are consistent with recommendations to increase the consumption of fresh foods and to reduce ultra-processed products.

The model of obesity induced by monosodium glutamate cytotoxicity on the hypothalamic nuclei is widely used in the literature. However, MSG promotes persistent muscle changes and there is a significant lack of studies that seek to elucidate the mechanisms by which damage refractory to reversal is established. This study aimed to investigate the early and chronic effects of MSG in-duction of obesity upon systemic and muscular parameters of Wistar rats. Animals were exposed to MSG subcutaneously (4 mg.g-1 b.w.) or saline (1.25 mg.g-1 b.w.) daily from PND01 to PND05 (n = 24). After, in PND15, 12 animals were euthanized to determine the plasma and inflammatory profile and to assess muscle damage. In PND142, the remaining animals were euthanized, and samples for histological and biochemical analyses were obtained. Our results suggest that early exposure to MSG reduced growth, and increased adiposity, induction hyperinsulinemia, and a pro-inflammatory scenario. In adulthood were found, peripheral insulin resistance, reduced muscle mass, oxidative capacity, neuromuscular junctions, increased fibrosis, and oxidative distress. Thus, we can conclude that the condition found in adult life and the difficulty in restoring the muscle profile are related to the metabolic damages established early.

S. aureus is an alarming human pathogen since it triggers numerous diseases, including impetigo and pneumonia. The S. aureus' ability to colonise the upper respiratory tract and other tissues, such as the skin, throat and gut, operate as reservoirs for infection. Indeed, being a carrier of S. aureus in the gut represents a risk factor for developing infection in distinct sites, including an unusual gastrointestinal tract disease. Here, we present an atypical clinical course of staphylococcal enterocolitis (SEC) in a man in his early seventies. After an unforeseen identification of methicillin-resistant Staphylococcus aureus (MRSA), the oral administration of vancomycin was critical in the outcome of the case. Although infrequent, SEC is an underestimated disease and requires a chapter in the treatment recommendations for antibiotic-related diarrhoea. Awareness of the risk factors and diagnostic tests, along with including SEC in algorithms for handling antibiotic-associated diarrhoea, is a step towards new epidemiological information.

Augmented and Virtual Reality have been experiencing a rapidly growth in recent years, but there is not still a deep knowledge on their capabilities and where they could be explored. In that sense, this paper presents a study on the accuracy and repeatability of the Microsoft's HoloLens 2 (Augmented Reality device) and HTC Vive (Virtual Reality device) using an OptiTrack system as ground truth. For the HoloLens 2, the method used was hand tracking, while in HTC Vive, the object tracked was the system's hand controller. A series of tests in different scenarios and situations were performed to explore what could influence the measures. The HTC Vive obtained results in the millimetre scale, while the HoloLens 2 revealed not so accurate measures (around 2 centimetres). Although the difference can seem to be considerable, the fact that HoloLens 2 was tracking the user's hand and not an inherit controller made a huge impact. The results were considered a significant step for the on going project of developing a human-robot interface to program by demonstration an industrial robot using Extended Reality, which shows great potential to succeed based on this data.

The genetic transformation of Coffea arabica L. is an alternative strategy for obtaining plants with agronomic traits of interest that is less time-consuming than conventional breeding methods. Given the importance of coffee cultivation in Colombia, this study evaluated the main factors interfering with the genetic transformation of C. arabica using Agrobacterium tumefaciens. An effi-cient and reproducible method was accordingly established that involved the propagation of “early” embryogenic tissue in a liquid proliferation medium, supplemented with 3 mg l−1 BAP for eight months, which was subsequently sonicated for 300 sec in a suspension of LBA4405 OD600 of 0.5 harboring pC1301 and incubated in this same suspension for 1 hr. This plasmid contained the uidA gene under control of the 35S promoter. The Agrobacterium suspen-sion was subsequently removed from the embryogenic tissue using a micropipette, after which the tissue was deposited on filter paper to remove the remaining Agrobacterium suspension. The embryogenic tissue was co-cultured for four days in a solid differentiation medium supple-mented with 100 µM acetosyringone on filter paper. Subsequently, the tissue was post-cultured for four days in liquid differentiation medium under orbital shaking at 100 rpm with 300 mg l−1 Claforan (Hoechst), followed by selection with 50 mg l-1 hygromycin at 26 °C in the dark, with subcultures at 20-day intervals until somatic embryos were formed for subsequent culturing in germination medium. Molecular analysis confirmed the presence of the uidA gene in coffee seedlings transformed with strains LBA4405 and EHA105 and vectors pC1301 and pC2301. This method successfully enables the stable integration of genes of interest in the coffee plant ge-nome

This paper introduces a theory for the evolution of corporates in which the growth and sustainability strategies are developed simultaneously. Since the introduction of corporate sustainability, it has been an extra cost for risk mitigation and making ‘compensating’ positive impact. The world has reached a tipping point of volatility, mainly due to climate change but also by emergence of COVID-19, so that the applicability of existing corporate structures is under question and these poses high risk to the existence of our planet. On the other hand, the technology cost for sustainable investment has reached a parity in comparison with non-sustainable alternatives. Therefore, our proposed Organic Grow Theory introduces a step-by-step approach so that corporates can grow and be profitable without compromising the ability of future generations to meet their needs. It is concluded that, a new structure for corporate, called Founcorp, would be needed to direct corporates to evolve being a responsible legal entity.

In this research, the photocatalytic degradation of cypermethrin using Fe-TiO2 nanoparticles supported in a biomaterial was evaluated. The nanoparticles of TiO2 were synthesized by the green chemistry method assisted by ultrasound and doped by chemical impregnation using molar ratios Fe:Ti of 0, 0.05, 0.075 and 0.1, to make efficient use of direct sunlight (λ>310 nm). All nanoparticles were immobilized on the surface of spathe of coconut palm (Cocos nucifera). The degradation was carried out at room temperature and natural pH in a flat plate solar reactor, on which the composite material was subjected. The concentration of cypermethrin was determined after 12000 J/m2 of accumulated radiation from GC-MS and the resulting material was characterized by Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) image and selected area electron diffraction (SAED), Fourier transform infrared spectroscopy (FTIR), UV-Vis spectrophotometry of diffuse reflectance and BET surface area BET surface area. The best results were achieved with the use of Degussa TiO2 P-25, Fe:Ti=0 and Fe:Ti=0.05 in suspension, with percentages of degradation of cypermethrin of 99.84, 99.62, and 100%, respectively. However, the materials supported on the biomaterial of coconut, they allowed to reach degradation percentages higher than 80% with the advantage that it minimizes operating costs, since they are not necessary filtering or centrifuging processes to separate the catalyst.

Since people spend most of their time in indoor environments, the objective of this work was to study indoor air quality perception and its effects on users’ thermal comfort. Based on previous data from a building with a central air-conditioning system and two mixed-mode buildings located in the humid subtropical climate of Florianópolis, southern Brazil, statistical analyses were performed. Each user subjective answer obtained through a questionnaire was combined with the corresponding environmental conditions – measured using microclimate stations, a portable thermo-anemometer and a CO2 analyser. Results showed that improvement in air quality was associated with the reduction of air temperature and humidity ratio. Also, there was a significant influence of thermal, air movement and humidity sensation and acceptability of air quality perception. Users felt more satisfied or neutral with air quality for being in thermal comfort, and not because of the CO2 level – which means that air quality perception is influenced by factors other than CO2. This study recommends the implementation of an air exchange device in split air-conditioners with air recirculation used in mixed-mode buildings in Brazil. It is important to provide suitable indoor ventilation to reduce pollutants concentration, ensure good air quality and prevent respiratory diseases.

Strawberry is produced in tropical regions using imported cultivars adapted to temperate and subtropical climates. These cultivars, under tropical conditions, produce below their genetic potential. Through multivariate analyses, the objective was to evaluate and select short-day strawberry genotypes based on intraspecific crosses, product characteristics, and fruit quality. The genotypes were obtained from the cross between 'Camino Real' (female parent) and the first-generation genotypes RVCA16, RVCS44, RVFS06, RVFS07, and RVDA11 (male parent), obtained in previous selections. The experimental design consisted of augmented blocks with standard controls, consisting of first-generation genotypes and commercial cultivars. The fruits were harvested and evaluated for productivity and post-harvest characteristics: Total Fruit Mass (MTF); Total Number of Fruits (TFN); Average Fruit Mass (AFM); Commercial Fruit Mass (CFM); Fruit Commercial Number (CFN); Average Commercial Mass of Fruits (ACFM); Total Soluble Solids (TSS); Firmness (F); Brightness (L); Hue Angle (°Hue); Chroma (C). The selection index of Mulamba and Mock (1978) was used with an intensity of 3% to obtain superior genotypes and submitted to multivariate analysis for comparative purposes. Of the 1500 genotypes evaluated, it was possible to select 44 genotypes with characteristics superior to the 13 controls. The RVDA11CR59 genotype showed better values for the attributes of interest, but the RVCS44CR population, from the cross between 'Camino Real' × RVCS44 ('Camarosa' × 'Sweet Charlie'), obtained the highest number (16) of individuals among those selected. Significant traits had high heritability but were not necessarily reflected in high selection gain. Coefficients of genetic variation were high, indicating sufficient genetic variability to select genotypes for these traits. When multivariate analyses were used, it was possible to group the selected genotypes into the same cluster according to the similarity and balance in the responses to the evaluated variables, demonstrating that these analyses help other parameters choose superior genotypes. The multivariate analysis allowed the selection of more balanced genotypes for production and post-harvest traits for tropical climates.

This study aimed to assess the response of 3D printed PLA scaffolds biomimetically coated with apatite on human primary osteoblast spheroids and evaluate the biological response to its association with Bone Morphogenetic Protein 2 (rhBMP-2) in rat calvaria. PLA scaffolds were produced via 3D printing, soaked in simulated body fluid (SBF) solution, and characterized by physical-chemical, morphological, and mechanical properties. The in vitro biological response was assessed with human primary osteoblast (HOb) spheroids. The in vivo analysis was conducted through the implantation of 3D printed PLA scaffolds either alone, covered by apatite (PLA-CaP) or PLA-CaP loaded with rhBMP-2 (PLA-CaP+rhBMP-2) on critical-sized defects (8 mm) of rat calvaria. Increased cell adhesion and in vitro release of growth factors (PDGF, bFGF, VEGF) was observed for PLA-CaP scaffolds when pre-treated with FBS. PLA-CaP+BMP2 presented higher values of newly formed bone (NFB) than other groups at all experimental periods (p&lt;0.05), attaining 44.85% of NFB after 6 months. These findings indicate that functionalization of PLA scaffolds with biomimetic apatite can improve its biological properties in the presence of complex biological media. Its association with BMP2 may enhance bone repair, suggesting this strategy as a promising candidate for bone tissue engineering.

Cork oak mortality has reached alarming proportions in the last decades, exacerbated by climate change. Understanding this phenomenon is crucial in finding mitigation or adaptation strategies. This study conducts a diachronic analysis of cork oak mortality over 10 years using GIS tools, focusing on Portugal's Tagus Lezíria region. Topographic, edaphic and climatic variables were employed to create maps of edaphoclimatic aptitude for cork oaks. Dead trees were identified using remote sensing techniques and crown coverage was determined to calculate the mortality index. The diachronic analysis aimed to explore climate change effects on cork oak mortality. A decrease in precipitation was observed, significantly impacting stands with canopy cover below 40%. Furthermore, a negative effect of solar radiation identified only in stands with canopy cover of 40% suggested its role in cork oak decline. This study introduces a novel perspective, highlighting the protective effect of denser canopy cover (above 40%) against excessive solar radiation and the impact of reduced precipitation. The integrated and diachronic approach provides valuable information for adapting management strategies to climate change challenges.

Background: Most modern studies about human marijuana use have been made under a set of arbitrary cultural standards and policies not related to drug harm potential, loosely called Prohibition. Here we asked if potential health hazards generated by Prohibition are addressed in research design and analysis. Methods: For this, we have searched PubMed database (from inception to December 2017) for citations of prevalent contaminants of illegal street cannabis: fungi and pesticides. In addition, we performed full text evaluation of 23 studies selected from, and including, 2 meta-analysis reviews investigating potential health hazards from cannabis use. Results: Different combinations of the keywords cannabis, prohibition, pesticides, fungi, contaminants, cancer, schizophrenia, psychosis, show that these words coincide in less than 1% of the cannabis human studies within the database. In the scope of 141 abstracts in which the terms, cannabis and pesticides coincide, none is directed to distinguish cannabis and pesticide adverse effects on CNS. A similar picture emerges when fungi is the paired word. Full text evaluation shows that all but one of the studies analyzed, completely neglect or comment on the nature of cannabis source, legal status, or contamination as a confounding factor. Discussion: Our results show a potential bias on scientific investigation that may affect data reliability in informing about the health hazards of cannabis use. This finding suggests that other aspects of the Prohibition environment may also go unacknowledged. Conclusion: Prohibition related health risks usually go unacknowledged and unaccounted for in biomedical research on Cannabis.

Whey proteins have excellent nutritional characteristics due to their levels of essential amino acids with high bioavailability. However, it has a high biochemical oxygen demand (BOD) and a considerable polluting potential, thus food manufacturers have opted to add whey to food formulations. The demand for beverages containing vitamins, probiotics, prebiotics, minerals, and bioactive compounds (antioxidants) with health benefits has increased and driven market growth. Therefore, this study aimed to develop a probiotic functional carbonated beverage from cheese whey and evaluate its microbiological, and physicochemical characteristics soon after the production and during storage. The viability and stability of probiotic, the microbiological characteristics, titratable acidity and sedimentation of the beverage were monitored during refrigerated storage for a month. The probiotic to be added to the formulation was established in a preliminary step. The production of this beverage proved to be a simple technology and the product was suitable for incorporation of the probiotic Bifidobacterium animalis subsp. lactis. The probiotic showed good viability and stability during storage. The microbiological quality of the beverage met the Brazilian legal standards. The pH and titratable acidity of the probiotic carbonated beverage remained stable during storage, and slight sedimentation was observed after one week of refrigerated storage.

The importance of shifting to a sustainable economy, based on new capabilities that enable to cope with the current turbulent changes is paramount. Entrepreneurs with sustainable concerns are considered to play a key role in the process by creating innovative, proactive and risk assumption solutions, both with environmental and economic value. To date, there is no consensus on what capabilities education should provide to create sustainable entrepreneurs to cope with sustainability challenges. The aim of this piece of literature is to identify relevant factors for sustainable entrepreneurship education. Bibliographic databases were searched for documents published between 2012 and June 2023 to categorize central issues discussed in the literature on sustainable entrepreneurship education. The review process specifies 59 empirical and non-empirical papers at sustainable entrepreneurship education (SEE). Data analysis revealed diverse models for sustainable entrepreneurship education (SEE) developed for use in both higher education institutions and secondary schools. Future research directions are underscored.

The importance of transforming to a sustainable economy to protect against global crises such as climate change is widely recognized. Sustainable entrepreneurs are seen as playing a key role in this transformation process by creating innovative market solutions with environmental, social, and economic value. To date, there is no consensus on the skills education should deliver to create sustainable entrepreneurs to solve sustainability challenges. The goal of this article is to identify sustainable entrepreneurship education factors that enable effective education of future sustainable entrepreneurs. An academic search engine and bibliographic database were searched for documents written in English and published between 2012 and April 2023 to identify existing educational models discussed in the current literature in sustainable entrepreneurship education (SEE). The review process resulted in a set of 59 empirical and non-empirical papers on SEE. The data analysis revealed different educational frameworks for sustainable entrepreneurship (SE), both developed for use in higher education institutions and secondary schools.

Nowadays, people live amidst the smart home domain, business opportunities in the industrial smart city and health care, though, along with concerns about security. Security is central for IoT systems to protect sensitive data and infrastructure, whilst security issues become increasingly expensive, in particular in Industrial Internet of Things (IIoT) domains. Nonetheless, there are some key challenges for dealing with those security issues in IoT domains: Applications operate in distributed environments such as Blockchain, varied smart objects are used, and sensors are limited in what comes to machine resources. In this way, traditional security does not fit in IoT systems. In this vein, the issue of cyber security has become paramount to the Internet of Things (IoT) and Industrial Internet of Things (IIoT) in mitigating cyber security risk for organizations and end users. New cyber security technologies / applications present improvements for IoT security management. Nevertheless, there is a gap on the effectiveness of IoT cyber risk solutions. This review article discusses the, trends around opportunities and threats in cyber security for IIoT.

Diverse forms of artificial intelligence (AI in further text) are at the forefront of triggering digital security innovations, based on the threats that are arising in this post COVID world. On the one hand, companies are experiencing difficulty in dealing with security challenges with regard to a variety of issues ranging from system openness, decision making, quality control and web domain, just to mention a few. On the other hand, in the last decade, research has focused on security capabilities based on tools such as platform complacency, intelligent trees, modeling methods and outage management systems, in an effort to understanding the interplay between AI and those issues. The dependence on the emergence of AI in running industries and shaping the education, transports and health sectors is now well known in literature. AI is increasingly employed in managing data security across economic sectors. Thus, a literature review of AI and system secu-rity within the current digital society is opportune. This paper aims at identifying research trends in the field through a Systematic Bibliometric Literature Review (LRSB) of research on AI and system security. The review entails 77 articles published in Scopus® database, presenting up-to-date knowledge on the topic. The LRSB results were synthesized across current research subthemes. Findings are presented. The originality of the paper relies on its LRSB method, together with extant review of articles that have not been categorized so far. Implications for future re-search are suggested.

The architectural configuration of the space plays a crucial role in the acoustics of Neonatal Intensive Care Units (NICUs). The design of the environment, the materials used in construction, and the organisation of noise sources within the room significantly influence the noise levels present in these critical areas. For this research, noise levels found in two hospitals, with different architectural configurations and sizes but similar construction materials, have been analyzed. Data were recorded at 1-second intervals over a period of more than 24 hours. The data collected in these hospitals confirm the magnitude of the noise problem in NICUs, highlighting the urgent need to address it effectively to ensure an appropriate and safe environment for the recovery of neonates. Good architectural planning can help mitigate noise, while poor configuration can exacerbate acoustic problems, negatively affecting both patients and healthcare staff. It is crucial to involve architects, acoustic engineers, and healthcare staff in the design and renovation of NICUs to create spaces that not only meet medical needs but also consider the auditory well-being of neonates.

Mechanical recycling of solid plastic wastes on a small-scale level can be accomplished with the correct approaches. Thermoplastics are mostly considered for mechanical recycling because of their physical properties and ease of reprocessing. This paper reviews the mechanical reprocessing techniques of selected thermoplastics (polyethylene terephthalate and polyolefins) since they constitute a significant proportion of plastics used commercially. Furthermore, necessary considerations for effective operation of small-scale plants, including energy requirements of machinery and optimisation in order to improve efficiency and product quality, are discussed. A clearer understanding and addressing of the process-related challenges will lead to successful establishment and management of small-scale mechanical recycling facilities to benefit communities. Efficient small-scale mechanical reprocessing establishments have become essential in reducing the environmental impacts of solid plastic wastes and for energy conservation.

In the field of embedded systems, energy efficiency is a critical requirement, particularly for battery-powered devices. RISC-V processors have gained popularity due to their flexibility and open-source nature, making them an attractive choice for embedded applications. However, not all RISC-V processors are equally energy-efficient, and it is important to evaluate their performance in specific use cases. This paper evaluates the energy consumption and resource utilization of a new RISC-V processor, RisCO2, and four existing processors - Zero-riscy, Micro-riscy, Ri5cy, and CV32E40P - in a signal demodulation application for NDIR CO2 sensors. The processors were implemented in the PULPino SoC and synthesized using Vivado IDE. The processor named RisCO2 is based on the RV32E_Zfinx instruction set and was designed from scratch by the authors specifically for low-power signal processing applications such as signal demodulation in CO2 NDIR sensors. The other processors are Ri5cy, Micro-riscy, and Zero-riscy, developed by the PULP Platform team, and CV32E40P (derived from Ri5cy) from the OpenHW Group, all of them widely used in the RISC-V community. Our experiments showed that RisCO2 had the lowest energy consumption among the five processors, with a 53.5% reduction in energy consumption compared to CV32E40P and a 94.8% reduction compared to Micro-riscy. Additionally, RisCO2 had the lowest FPGA resource utilization compared to the best-performing processors, CV32E40P and Ri5cy, with a 46.1% and a 59% reduction in LUTs, respectively. Our findings suggest that RisCO2 is a highly energy-efficient RISC-V processor for NDIR CO2 sensors that require signal demodulation. The results also highlight the importance of evaluating processors in specific use cases to identify the most energy-efficient option. This paper provides valuable insights for designers of energy-efficient embedded systems using RISC-V processors.

Aim: Child-to-parent offenders (CPOs) are commonly specialist offenders and with high rates of recidivism. Thus, a field study was designed to estimate the prevalence in the reference measures of recidivism i.e., dangerousness, risk factors and psychopathy, and compare CPOs with non-child-to-parent juvenile offenders. Method: 136 juvenile offenders (76.5% boys), 76 CPOs and 60 non-CPOs juvenile offenders, aged from 14 to 18 years old, were measured in dangerousness, risk of factors and psychopathic traits. Results: The results showed in CPOs a more than common prevalence (&gt; .50), 75.0%, 95% CI [.653, .847], of dangerousness (caseness); a significant prevalence (&gt; .05) of diagnostic of psychopathy, 25.0%, 95% CI [.150, .350]; and a common prevalence (= .50), 55.3%, 95% CI [.441, .665] of classification as high and very high risk by risk factors. Comparatively, no significant differences were observed between CPOs and non-CPOS juvenile offenders in mental health problems (dangerousness), meanwhile that CPOs exhibited significant more interpersonal and affective psychopathic traits and significant more risk in family circumstances, and personality and behaviour risk factors. Conclusions: The implications for prevention and intervention programs with CPOs are discussed

Beans are the most widely used protein source in the world and their productivity is directly linked to nitrogen (N). The short crop cycle imposes the need for fast methodologies for N quantification. In this work, we evaluated the performance of four machine learning algorithms in nitrogen prediction using NIR spectroscopy. Increasing doses of nitrogen were applied to the plants and leaf reflectance was collected. Weka software was used to test the algorithms. The selection of the most effective spectral zones was made with the VIP. Considering predictions with the whole NIR, the best results were achieved with RF (R2 = 0,84 and RMSE = 2,69 g kg-1) and KNN (R2 = 0,77 and RMSE = 3,86 g kg-1). The intervals of 700-740 nm and 983-995 nm were considered the most important for the study of N. More efficient predictions were verified when only spectral regions screened by VIP were included, increasing the accuracy of the RF, KNN and M5 models by 6%, 4% and 8%, respectively. The efficiency of N prediction based on NIR reflectance combined with machine learning was verified. This approach can optimize the management of nitrogen fertilization, serving as an important tool in precision agriculture.

The betatron tune in the Large Hadron Collider (LHC) is measured using a Base-Band Tune (BBQ) system. The processing of these BBQ signals is often perturbed by 50 Hz noise harmonics present in the beam. This causes the tune measurement algorithm, currently based on peak detection, to provide incorrect tune estimates during the acceleration cycle with values that oscillate between neighbouring harmonics. The LHC tune feedback (QFB) cannot be used to its full extent in these conditions as it relies on stable and reliable tune estimates. In this work we propose new tune estimation algorithms, designed to mitigate this problem through different techniques. As ground-truth of the real tune measurement does not exist, we developed a surrogate model, which allowed us to perform a comparative analysis of a simple weighted moving average, Gaussian Processes and different deep learning techniques. The simulated dataset used to train the deep models was also improved using a variant of Generative Adversarial Networks (GANs) called SimGAN. In addition we demonstrate how these methods perform with respect to the present tune estimation algorithm.

Strong evidence indicates that insulin resistance contributes to the development of Alzheimer´s disease by promoting inflammation, oxidative stress, and blood vessel damage. Conversely, neuroinflammation induces insulin resistance by targeting insulin signaling molecules: the insulin receptor substrates 1 and 2 (IRS1/2). In addition, neuroinflammation is strongly linked to reduced levels of brain-derived neurotrophic factor (BDNF) expression. BDNF is a key factor for neuronal survival, and its expression is compromised in neurodegenerative disorders. In this study, we show that, in a triple-transgenic (3xTg) mice model of Alzheimer’s disease, the BDNF and IRS2 but not the IRS1 mRNA expression levels were reduced in the hippocampus, together with higher levels of TNFα, compared with wild-type mice. Subgroups of control and 3xTg mice received short and long treatments of Abscisic Acid (ABA), a phytohormone with anti-inflammatory and insulin-sensitizing capabilities. We found that the short ABA treatment can increase the IRS1 and IRS2 mRNA expression both in wild-type and 3xTg mice, concomitant with reducing pro-inflammatory cytokine TNFα in 3xTg mice. However, earlier, and thus longer treatments are required to rescue the BDNF mRNA levels. Our data strongly confirm that ABA administration is a potential treatment to prevent Alzheimer´s disease, via lowering neuroinflammation, potentially rescuing insulin signaling molecules and BDNF mRNA expression.

The production of fuels and other industrial products from renewable sources has intensified the search for new substrates or for the expansion of the use of substrates already in use, as well as the search for microorganisms with different metabolic capacities. In the present work, we isolated and tested a yeast from the soil of sugarcane irrigated with vinasse, that is, with high mineral content and acidic pH. The strain of Meyerozyma caribbica URM 8365 was able to ferment glucose, but the use of xylose occurred when some oxygenation was provided. However, some fermentation of xylose to ethanol in oxygen limitation also occurs if glucose is present. This strain was able to produce ethanol from molasses substrate with 76% efficiency, showing its tolerance to possible inhibitors. High ethanol production efficiencies were also observed in acidic hydrolysates of each bagasse, sorghum, and cactus pear biomass. Mixtures of these substrates were tested and the best composition was found for the use of excess plant biomass in supplementation of primary substrates. It was also possible to verify the production of xylitol from xylose when the acetic acid concentration is reduced. Finally, the proposed metabolic model allowed calculating how much of the xylose carbon can be directed to the production of ethanol and/or xylitol in the presence of glucose. With this, it is possible to design an industrial plant that combines the production of ethanol and/or xylitol using combinations of primary substrates with hydrolysates of their biomass.

Oral mucositis is most frequently a toxic effect of chemotherapeutic and/or radiotherapeutic treatment, resulting from complex multifaceted biological events involving DNA damage. The clinical manifestations have a negative impact on the life quality of cancer patients. Preventive measures and curative treatment of mucositis are still not well established. The glycine has anti-inflammatory, immunomodulatory and cytoprotective actions, being a potential therapeutic in mucositis. The objective was to evaluate the effects of glycine on the expression of collagen and growth factors, platelet and epidermal in oral mucositis. The mucositis of which was induced by the protocol of Sonis. 40 hamsters were used, divided into two groups: Group I- control; Group II- supplemented with 5% intraperitoneal glycine, 2,0 mg/g diluted in hepes. Histopathological sections were used to perform the immune-histochemical method, the evaluation collagen expression and the growth factors: EGF and PDGF. It was observed that the group supplemented with glycine higher amounts of collagen expression and predominance type of collagen I. The glycine group presented lower immunoexpression of the growth factors, EGF and PDGF. The group supplemented with glycine showed a marked healing process of the oral mucosite, demonstrated by the predominance of collagen type I and reduction of growth factors, EGF and PDGF.

This study aimed to compare three different extracts of Saco sweet cherry, namely non-coloured fraction, coloured fraction and total extract concerning phenolic composition, antioxidant and antidiabetic potential, erythrocytes’ protection and effects on Caco-2 cells. A total of 22 phenolic compounds were identified by LC-DAD. Hydroxycinnamic acids were the most predominant in both non-coloured fraction and total extract, while cyanidin-3-O-rutinoside was the main anthocyanin found in the coloured fraction. The total extract was the most effective against DPPH, nitric oxide and superoxide radicals, and in the inhibition of α-glucosidase enzyme. Finally, the protective effect of the extracts to prevent oxidative damage in human erythrocytes was assessed. The coloured fraction revealed the best activity against hemoglobin oxidation and hemolysis. Regarding to Caco-2 cells, the coloured extract exhibited the most cytotoxic effects, while the total extract was the most efficient in protecting these cells against oxidative damage induced by t-BHP.

Gastrointestinal diseases caused by parasites are frequently diagnosed in the clinical routine of domestic animals, especially dogs and cats. In general, they trigger factors that can affect individual health due to zoonoses. Therefore, this study aims to identify the main intestinal parasites obtained from the fecal samples of dogs and cats in the municipality of Jata, Brazil, and their associated risk factors. Between October 2020 and March 2022, fecal samples were collected from 359 dogs and 55 cats through spontaneous defecation and subsequently subjected to coproparasitological analyses using the Willis fluctuation and Hoffman spontaneous sedimentation techniques. The following parasitic species were identified: Ancylostoma, Toxocara, Trichuris vulpis, Dipylidium caninum; Giardia, Entamoeba, Cystoisospora, and Platynosomum fastosum. The risk factors associated with parasitism include age, average income of owners, access to garbage, sewage, waste, outdated deworming, and contact with animals. The results demonstrate the need to establish public policies and implement preventive and control measures to reduce the occurrence of parasites in animals and the exposure of humans to pathogenic agents.

This article introduces simulations of theoretical material with controlled properties for the evaluation of the effect of key parameters, as volumetric fractions, elastic properties of each phase and transition zone on the effective dynamic elastic modulus (Ed). The accuracy level of classical homogenization models was checked regarding the prediction of Ed. Numerical simulations were performed with finite element method (FEM) for evaluations of the natural frequencies and their correlation with Ed, through frequency equations. An acoustic test validated the numerical results and obtained the elastic modulus of concretes and mortars at 0.3, 0.5 and 0.7 water-cement ratios (w/c). Hirsch calibrated according to the numerical simulation (x = 0.27) exhibited a realistic behavior for concretes of w/c = 0.3 and 0.5, with 5% error. Nevertheless, for w/c = 0.7, Ed approached Reuss model, similarly to theoretical triphasic materials. Hashin-Shtrikman bounds is not perfectly applied to theoretical biphasic materials under dynamic situations.

Diaminomaleonitrile (DAMN) is an electron-rich ligand which is commonly used in the synthesis of purines, amides and Schiff base ligands. In the last case lies the interest in this molecule, given its symmetry and apparent facility to form various ligands and complexes of interest in fields such as organic solar cells and catalysis among others. Nevertheless, its bisubstitution with aldehydes displays certain difficulty due to the double conjugated presence of the nitrile group (C≡N) in its structure, which significantly affect its coordination behavior by modulating the chemical reactivity of its amines. In addition to presenting a practical resume of guidelines for the preparation of different bisubstituted compounds from DAMN, this paper reviews the possibility of attaining a precise characterization by simple spectroscopic techniques. We provide an additional discussion for one of these techniques (commonly reported but often overlooked), given its potential to provide both the symmetry and E/Z configuration of the product. We hope the comprehensive evidence discussed and shown in this review will be helpful to further develop and understand the products derived of this interesting molecule in their broad applications.

Road dust resuspension, especially the particulate matter fraction below 10 µm (PM10), is one of the main air quality management challenges in Europe. Road dust samples were collected from representative streets (suburban and urban) of the city of Viana do Castelo, Portugal. PM10 emission factors (mg veh-1 km-1) ranging from 49 (asphalt) to 330 (cobble stone) were estimated by means of the United Stated Environmental Protection Agency method. Two road dust fractions (< 0.074 mm and from 0.0074 to 1 mm) were characterised for their geochemical, mineralogical and morphological properties. In urban streets, road dusts reveal the contribution from traffic emissions, with higher concentrations of e.g. Cu, Zn, and Pb. In the suburban area, agriculture practices likely contributed to As concentrations of 180 mg kg-1 in the finest road dust fraction. Samples are primarily composed of quartz, but also of muscovite, albite, kaolinite, microcline, Fe-enstatite, graphite and amorphous content. Particle morphology clearly shows the link with natural and traffic related materials, with well-formed minerals and irregular aggregates. The hazard quotient suggests a probability to induce non-carcinogenic adverse health effects in children by ingestion of Zr. Arsenic in the suburban street represents a human health risk of 1.58 x 10-4.

Development of non-conventional hybrids (NCHs) responds to the demand for the Elotes Occidentales 'EO' race for production of pozole. The effect of: crop cycle (2019, 2020 and 2021) on physical characteristics, flowered grain quality and phytochemical content of two HNC (Pz1 and Pz2) of pozolero maize, as well as the effect of the presence or absence of pedicel, type of pollination (open and controlled, 2019), and progenitor lines (female and male, 2020) on flowered grain quality and content of phytochemical compounds were evaluated. Size, hardness, color, total phenols and anthocyanins in unprocessed grain were determined, and yield, volume and puncture strength in flowered grain. Results were analyzed with a factorial arrangement in a completely randomized design. There were significant differences (p≤0.05) in most of the variables studied by effect of crop cycle and genotype. NCHs had large grains (40 g 100 grains-1), soft endosperm (IF&gt; 60), pink-purple color, and phenol and anthocyanin contents similar to those reported for the 'EO' race. The presence or absence of the pedicel did not affect flowered grain quality. Controlled pollination favored anthocyanin synthesis. The anthocyanin content of NCHs was determined by the female line. Thermal processing reduced anthocyanins by 60%; however, they leached into the flowering broth, so that the pozole made from NCHs improves the nutraceutical value of the pozole, relative to that of pozole made with Cacahuacintle maize.

In this paper we establish information theoretical bridges between 1) Thermal Heisenberg uncertainties $\Delta x \Delta p$ (at temperature $T$), and 2) LMC structural quantifiers. After having achieved such purpose, we determine to what an extent our bridges can be extended to both the semi classical and classical realms. Also, we find a strict bound relating a special LMC structural quantifier to quantum uncertainties.

Minimally processed fruits undergo changes that need to be controlled. The objective was to evaluate minimally processed papayas, using edible coatings based on chitosan and gelatin through different techniques. The following treatments were applied: control (distilled water), 1% chitosan, 4% gelatin, 1% chitosan + 4% gelatin (blend) and 1% chitosan under 4% gelatin (layer by layer). The infrared spectroscopy (FTIR) of the coatings was analyzed, and fresh mass, firmness, pulp color (L*, a*, b* and Hue angle), pH, titratable acidity, soluble solids, ascorbic acid, phenolic compounds, lycopene, β-carotene, total sugars and catalase from fruits. Gelatin and the layer-by-layer treatment had a positive effect on the conservation of minimally processed papaya. These coatings were able to reduce the loss of fresh mass, maintaining the firmness and orange color of the mesocarp. The treatments showed low SS content during the storage period, few variations in acidity, influencing maturation. Gelatin had a low polyphenol content, the layer-by-layer treatment did not show changes in vitamin C levels. These treatments did not show changes in lycopene and β-carotene levels over the days, showing a small increase in total sugars. Thus, the use of gelatin polymers and undercoat treatment (LBL) is a viable alternative to preserve minimally processed papayas for at least 8 days.

In this review we summarize existing trends of flow control used to improve the aerodynamic efficiency of wings. We first discuss active methods to control turbulence, starting with flat-plate geometries and building towards the more complicated flow around wings. Then, we discuss active approaches to control separation, a crucial aspect towards achieving high aerodynamic efficiency. Furthermore, we highlight methods relying on turbulence simulation, and discuss various levels of modelling. Finally, we thoroughly revise data-driven methods, their application to flow control, and focus on deep reinforcement learning (DRL). We conclude that this methodology has the potential to discover novel control strategies in complex turbulent flows of aerodynamic relevance.

Preterm birth accounts for about 10% of births worldwide. Studying risk factors for perinatal brain damage is essential, as findings suggest that almost 20% of disabilities are linked to risks in the early stages of development. This research aimed to study longitudinal changes in intelligence from 6 to 8 years of age in a sample of 39 preterm children with a history of risk of brain damage and a control group of 35 children born at term. The Wechsler Intelligence Scale (WISC-IV) was used for cognitive measurement. The results showed that the preterm group obtained significantly lower scores than the control group. The working memory indicator significantly affected the interaction between age and prematurity. We consider that it is crucial to expand the knowledge we have about the neurocognitive development of premature infants both in specific cognitive domains and in age ranges so that the information obtained helps to predict the probability of presenting cognitive alterations from early stages and, therefore, to implement intervention strategies and programs based on scientific evidence and complemented in their design by clinical experience, empirical and theoretical knowledge of the different professionals involved in infant cognitive intervention.

The literature has well established prestressing in concrete beams and its calculation procedures. However, its use in composite steel-concrete beams has increased despite main normative codes lacking a specific approach for it. Designers must, in most cases, combine the available criteria to calculate the standards of steel and reinforced concrete structures. This study aimed to formulate this optimization problem and analyze CO2 emissions for the optimal design of composite steel-concrete beams with external prestressing. The design variables for the optimization problem include cross-section of laminated or welded profiles, slab height, characteristic strength of concrete to compression, and number of tendons. We obtained a solution for the optimization problem via a genetic algorithm (GA) and a particle swarm optimization one (PSO). Comparative analysis with experimental example and with optimization problem of prestressed steel beam are performed. An parametric analysis to several spams is performed, which enabled to evaluate the factors that most impact CO2 emissions. According to results, the chosen algorithms effectively obtained solutions for the problem, and PSO usually provided better results than GA. Regarding the final solution composition, steel contributes the most to emissions, welded profiles provided better solutions than laminated ones, and laminated spans of up to 17.5m and welded ones up to 27.5m dispensed with tendons.

During 2010, at the Facultad de Medicina Veterinaria y Zootecnia of the Universidad Nacional Autónoma de México (fmvz-unam) we analyzed the influence of metadata over its website according to the search engines used by the academic community. This document serves only the second specific objective of the research: to know the academic profile, the informative behavior and the veterinary information needs of the academic community of the fmvz-unam. The methodological tool was the design and implementation of an online survey. We received 215 responses, two thirds answered academic staff, the rest, undergraduate and postgraduate students. In relation to information behavior, an Internet-usage index was developed, with which it was determined that 64 % of this community uses four or five information services on the Internet, This means that the network is widely used to seek information and as communication media. This community search for more veterinary information related to dogs, dairy cattle and sheep, compared to other animal species; while animal welfare, zoonosis and molecular biology are the topics of greatest interest.

Elastic properties of materials and their changes with temperature are important for their applications in engineering. A study on the influence of phase composition of AISI 4130 alloy on Young's modulus (Ed), shear modulus (Gd), and damping (Q-1) was carried out by Impulse Excitation Technique (IET). The material characterization was carried out using confocal microscopy, XRD, MET, HV, and dilatometry. A stable structure, composed of ferrite (BCC) and pearlite (α-Fe+Fe3C), was obtained by annealing. Metastable structure of martensite (BCT) was obtained by quenching. The Ed, Gd, and Q-1 were measured, varying the temperature from RT to 900 °C. The values of Ed and Gd, at RT, were determined as 201.5 and 79.2 GPa (annealed), and 190.13 and 76.5 GPa (quenched), respectively. In the annealed steel, the values Ed and Gd decrease linearly on heating up to 650 °C, with the thermal expansion. In the quenched steel, weak changes in the dilatometric curve, Ed, Gd, and Q-1, in the range of 350-450 °C, indicated decompositions of the martensitic phase. Sharp decrease in the moduli and high peak of Q-1, was observed for both samples around 650-900 °C, revealing low lattice elastic stability of the phases during transformations α(BCC)+Fe3C↔γ(FCC).

This narrative review synthesizes recent basic and clinical research on visual disturbances in low-light environments, highlighting evaluation techniques for these conditions. It focuses on the degradation of visual acuity under dim lighting, exacerbated by pupil dilation, known as night vision disturbances (NVD). Key contributors to NVD include optical scattering, intraocular diffraction, ocular aberrations, and uncorrected refractive errors, all significantly impacting quality of life and functional abilities. The review also examines the effects of aging, eye disorders, surgical interventions, and corneal irregularities on NVD. It details the definitions, distinctions, and measurement methodologies for various optical phenomena, using both objective and subjective approaches, such as visual function questionnaires, simulators, and the Light Distortion Analyzer (LDA). The LDA is validated for clinical characterization and quantification of light distortion, proving useful in both clinical and research settings. The review advocates for continued innovation in therapeutic interventions to improve patient outcomes and alleviate the impact of visual disturbances.

Due to the progression of antimicrobial resistance, Photodynamic (aPDT) and Sonodynamic (SDT) Therapies arose as promising approaches for microbial control. Recently, the combination of both therapies, called Sonophotodynamic Therapy (SPDT), have shown greater effects than the single treatments. This study evaluated the effects of aPDT, SDT and SPDT mediated by curcumin on the metabolism, adhesion capacity, biofilm formation ability and structural alteration in the Staphylococcus aureus biofilm. Moreover, possible antimicrobial mechanisms involved, such as the production of reactive oxygen species (ROS) and the degradation spectrum of curcumin by light, ultrasound and light+ultrasound, were measured. SPDT was more effective to inactivate the biofilm than aPDT and SDT. All treatments reduced the adhesion ability of the bacteria and it is probably related to the metabolism cell reduction. Regarding to the biofilm formation ability, all treatments reduced the total biomass. One possible mechanism involved in the inactivation is the ROS production observed. Curcumin had a significantly decay in its absorbance with the application of light, and a slighter one caused by the ultrasound. Finally, all treatments impacted the biofilm components and structure, reducing the cells and matrix. In conclusion, SPDT was more effective in the inactivation, and all treatments had the same effect in the virulence factors evaluated.

A presentation is provided of a structural approach for the concurrent teaching of introductory propositional calculus and set theory. The existence of isomorphism is shown between each law (or tautology) of propositional calculus and the form of a corresponding set which is equal to the universal set U considered.

Multicriteria decision aid requires a database as a decision matrix, in which two or more alternatives are evaluated according to two or more variables selected as decision criteria. Several problems of this nature use measures by Likert scales. Depending on the method, parameters from these data (e.g. means, modes or medians) are required for calculations. This parameterization of data in ordinal scales has fueled controversy for decades between authors who favor mathematical/statistical rigor and argue against the procedure, stating that ordinal scales should not be parameterized, and scientists from other areas who have shown gains from the process that compensate for this relaxation. The aim of this article is to demonstrate the advantages of the Composition of Probabilistic Preferences (CPP) method in multicriteria problems with data from Likert scales. The CPP is capable of allaying the protests raised and obtaining more accurate results than descriptive statistics or parametric models can bring. The proposed algorithm in R-code involves the use of CPP with empirical distributions and fitting histograms of data measured by Likert scales. Two case studies with simulated datasets having peculiar characteristics and a real case illustrate the advantages of the CPP.

Despite advances in the reliability of sensory devices used by drones, the integrity of information from some devices is still considered an obstacle to ensuring successful flight plans. It is widely known that GNSS can suffer attacks or lose the signal from satellites, which can cause the drone to fail to complete its flight plan. In this context, we propose SiaN-VO, a Siamese network for visual odometry prediction. In our initial studies, this approach proved satisfactory for flights in static conditions (speed and height). Although interesting, these conditions do not reflect real flight conditions. In this sense, we have advanced our studies to propose the SiaN-VO, which fuses data from different sensors to enable displacement predictions to be made in dynamic flight conditions.

Targeted protein degradation is an attractive technology for cancer treatment due to its ability to overcome the unpredictability of small molecule inhibitors that cause resistance mutations. In recent years, various targeted protein degradation strategies have been developed based on the ubiquitin-proteasome system in the cytoplasm or the autophagy-lysosomal system during endocytosis. In this review, we describe and compare technologies for targeted inhibition and targeted degradation of the epidermal growth factor receptor (EGFR), one of the major proteins responsible for the onset and progression of many types of cancer. In addition, we have developed an alternative strategy, called alloAUTO, based on the binding of new heterocyclic compounds to an allosteric site located in close proximity to the EGFR catalytic site. These compounds cause targeted degradation of the transmembrane receptor, simultaneously activating both systems of protein degradation in cells. Damage to EGFR signaling pathways promotes inactivation of Bim sensor protein phosphorylation, which leads to disintegration of the cytoskeleton, followed by detachment of cancer cells from the extracellular matrix and, ultimately, to cancer cell death. This hallmark of targeted cancer cell death suggests an advantage over other targeted protein degradation strategies, namely that the fewer cancer cells survive, the fewer chemotherapy-resistant mutants appear.

This paper describes the design and implementation of an ultrasonic non-contact air-coupled technique (UNCACT) using antisymmetric Lamb waves (ALW) for NDT assessment in novel composite sandwich plates of the car body shell. This technique is complemented with a C-Scan image implementation using this kind of guided waves. The finite element method using Comsol 6.1 is developed for the interpretation of the several wave modes presented in the experiments, including the ALW mode. The phase velocity method (PVM) is applied for the verification of the ALW mode in the portion of the RF signal necessary in the C-Scan image.