Augmented and Virtual Reality have been experiencing a rapidly growth in recent years, but there is not still a deep knowledge on their capabilities and where they could be explored. In that sense, this paper presents a study on the accuracy and repeatability of the Microsoft's HoloLens 2 (Augmented Reality device) and HTC Vive (Virtual Reality device) using an OptiTrack system as ground truth. For the HoloLens 2, the method used was hand tracking, while in HTC Vive, the object tracked was the system's hand controller. A series of tests in different scenarios and situations were performed to explore what could influence the measures. The HTC Vive obtained results in the millimetre scale, while the HoloLens 2 revealed not so accurate measures (around 2 centimetres). Although the difference can seem to be considerable, the fact that HoloLens 2 was tracking the user's hand and not an inherit controller made a huge impact. The results were considered a significant step for the on going project of developing a human-robot interface to program by demonstration an industrial robot using Extended Reality, which shows great potential to succeed based on this data.

Shear thickening fluids (STF) are a class of fluids whose viscosity significantly rises under external loads. The research on these fluids has been advancing in recent years regarding prospective practical applications, including developing impact-absorbing composites. Following the green agendas governments and legislators advocate, this study investigates the combination of STF and other sustainable materials. Cork is a naturally occurring cellular material with a negative carbon footprint and superior energy absorption properties. With varying concentrations of STF material, cork agglomerates were formed. Notably, the analysed blends are homogeneous, contrasting with previous literary works. A series of experiments were conducted in quasi-static and dynamic conditions to determine the various mechanical responses. STF appears to influence the mechanical behaviour of cork agglomerates by providing softer deceleration rates and dispersing more energy through disaggregation mechanisms.

Magnetic Resonance Imaging (MRI) is a powerful, non-invasive and nondestructive tool, capable of providing three-dimensional (3D) images of living organisms. The use of magnetic contrast agents has allowed clinical researchers and analysts to enormously increase the sensitivity and specificity of MRI since these substances change the intrinsic properties of the tissues within a living body, increasing the information present in the images. The advances in nanotechnology and materials science as well as the research of new magnetic effects have been the driving forces that propel the use of magnetic nanostructures as promising alternatives to the commercial contrast agents used in MRI. This review discusses the principles associated with the use of contrast agents in MRI as well as the most recent reports focused on nanostructured contrast agents. The potential applications of gadolinium (Gd) and manganese Mn-based nanomaterials and iron oxide nanoparticles in this imaging technique are discussed as well, from their magnetic behavior to the mainly used materials and nanoarchitectures. Then, it is also addressed the recent efforts made to develop new types of contrast agents based on synthetic antiferromagnetic and high-aspect ratio nanostructures. Furthermore, the application of these materials in theragnosis, either as contrast agents and controlled drug release, contrast agents and thermal therapy or contrast agents and radiosensitizers, is also presented.

Many neurodegenerative diseases are directly related to the formation of toxic protein aggregates, such as Parkinson’s and Alzheimer’s diseases, which are associated with the aggregation of alpha-synuclein (α-syn) and beta-amyloid (Aβ ), respectively. In this context, protein fibrils are the hallmark of these neurodegenerative diseases. In this sense, planning or designing compounds that are capable of preventing or reducing the formation of protein aggregation in the brain can be of fundamental importance for the curative treatment of these diseases. This work presents an in silico and experimental study to investigate the inhibitory potential of the ligands Octovespin (bioinspired by the wasp venom Polybia Occidentalis) and Fraternine-10 (bioinspired by the wasp venom Parachartergus fraternus wasp) against the aggregation of fibrils of the peptides Aβ(17-42) and α-syn, respectively. Using molecular docking and molecular dynamics simulations with 100 ns, the disaggregation capacity of these ligands was studied. The results obtained indicate that Octovespin and Fraternine-10 interact with the Aβ and α-syn protein fibrils throughout the simulation time. The RMSD values and the interactions with amino acids responsible for fibril aggregation demonstrate that both Octovespin and Fraternine-10 have a significant disaggregation potential, which corroborates the observations in vitro and in vivo. Furthermore, experimental results of Fraternine-10 demonstrate an anti-aggregation effect, indicating that it can promote the disaggregation of fibrils and prevent them from aggregating again to form oligomers. These discoveries qualify these molecules as potential candidates to become medicines against Parkinson’s and Alzheimer’s diseases.

The atherosclerosis, a chronic and inflammatory disease that occurs when there are high levels of low-density lipoprotein (LDL) on plasma. This important risk factor for development of cardiovascular disease (CVD) is the main cause of death worldwide. MicroRNAs have recently emerged as potential biomarkers and therapeutic target for lipid metabolism disorders. In this review, we will provide profile of surrounding miRNAs that have demonstrated being regulators of PCSK9, LDLR and APOB100 genes. Recent work has identified the mir-148, mir-128, mir-27a/b, mir-185, mir-301, mir-130 as important regulators of this pathway because they decrease supply of LDL receptors through interaction with PCSK9. Inhibition of LDLR expression cause elevation of plasma LDL levels which induces atherosclerosis. While mir-30c, mir-122, mir-34 decrease MTTP, which promotes degradation of APOB100 preventing assembly and secretion of VLDL. We conclude that, when overexpressed, mir-148a, mir128 and mir-27a/b, mir-122 and mir-34 are related to decrease in LDLR, facilitating occurrence of atherosclerosis. While mir-30 has been linked to decreased atherosclerosis. Detection of miRNAs profile could be used in the future as a biomarker for disturbs linked to c-LDL uptake and in future anti-miRNAs therapies may be used in the treatment of atherosclerosis.

This study aimed to investigate the healing effect of advanced platelet-rich fibrin (A-PRF) clot membranes in the reduction of palatal wounds resulting from free gingival graft (FGG) harvesting, in the re-epithelization rate and in the pain experience after surgery. Twenty-five patients requiring soft tissue augmentation (gingival recession coverage or keratinized gingiva augmentation) participated in this prospective randomized clinical study. After FGG harvesting, the test group (n=14) received A-PRF clot membranes at the palatal wound and the control group (n=11) a gelatin sponge. Epithelialization rate of the palatal wound, wound healing area, correspondent percentage of reduction and post-surgical pain experience were assessed. The follow-up period was 90 days. There was a significantly higher reduction of the palatal wound area in the A-PRF group vs. the control group, at 7 (p<0.001), 14 (p=0.009) and 30 days (p<0.001) follow-up. The maximum difference between groups was attained at 30 days (91.5% for A-PRF vs. 59.0% for the control group). At 14 days a significant difference in the proportion of patients showing total epithelization was found: 64.3% for A-PRF vs. 9.1% for the control group (p=0.012). At 90 days, both groups showed total recovery. Overall, the control group experienced a higher level of pain and discomfort until the 14th day, being significantly higher on the second day (p=0.013). The results suggest that A-PRF membranes haste the healing process by promoting a greater reduction along the recovery period and an apparent less painful postoperative period.

In bone tissue engineering, ceramics have been the choice due to their excellent biological properties. But the paradigm changed with the discovery of bioactive glasses (BGs) in 1969 by Larry Hench and co-workers, due to their ability to bond to living tissues through the formation of an interfacial bone-like hydroxyapatite layer when the bioglass was put in contact with biological fluids in vivo. Among a number of tested compositions, the one exhibiting the highest bioactivity index is the well-known trademarked 45S5 Bioglass®. The topic received increasing attention particularly after 1985 when this material entered in the market of biomedical devices, inspiring many other investigations aiming at further exploring the in vitro and in vivo performances of this BG, or developing other related BG compositions. The research efforts gradually revealed a number of shortcomings of 45S5 Bioglass®, mostly derived from its high sodium content, initially intended to decrease the melting temperature and accelerating the degradation of the silicate network over time. But the extensive release of sodium from 45S5 Bioglass® in the biological fluids creates a high pH cytotoxic environment. Other serious drawbacks include a fast degradation rate, and a poor sintering ability, which hinders the reliable fabrication of porous scaffolds. Therefore, sol-gel was regarded as an attractive alternative to prepare alkali-free BG compositions. The process uses inorganic and/or organic precursors, which undergo hydrolysis and condensation at room-temperature, being less costly. When properly conducted, the sol-gel process might result in amorphous structures with all the components intimately mixed at the atomic scale. Moreover, developing new better performing materials for bone tissue engineering is a growing concern, as the ageing of the world’s population leads to lower bone density and osteoporosis. This work describes the sol-gel synthesis of a novel quaternary silicate-based BG with the composition 60 SiO2 – 34 CaO – 4 MgO – 2 P2O5 (mol%) was prepared using acidified distilled water as single solvent. By controlling the kinetics of the hydrolysis and condensation steps, an amorphous glass structure could be obtained. The results of XRD of samples calcined within the temperature range from 600-900 ºC demonstrated that amorphous nature was maintained until 800 ºC, followed by partial crystallization at 900 ºC. The specific surface area, an important factor in osteoconduction, was also evaluated over different temperatures, ranging from 160.6 ± 0.8 m2/g at 600 ºC down to 2.2 ± 0.1 m2/g at 900 ºC, being accompanied consistent changes in average pore size and agreeing pore size distribution. The immersion of the BG particles in simulated body fluid (SBF) led to the formation of an extensive apatite layer on its surface. These overall results indicate the proposed material is very promising for biomedical applications in bone regeneration and tissue engineering.

Traumatic Brain Injury represents a significant public health concern due to its role in traumatic death and disability, often caused by head impacts or rapid accelerations. Despite advancements in Finite Element Head Models, existing models primarily represent adult males, neglecting anatomical and physiological differences between genders and age groups. Additionally, the mechanistic roles of specific intracranial tissues, such as the dura mater, have conventionally been overlooked. To better understand the mechanical behavior of the brain and its injured regions in the context of TBI, including the dura mater, this study proposes the development of a Female Finite Element Head Model. This model, representative of a middle-aged female subject, was developed using medical image-derived geometry and finite element modeling techniques. The validation results demonstrate a similarity between the numerical displacement curves and those obtained experimentally. In the model with dura mater, the numerical results show analogous behavior to the experimental results, despite minimal variations in the amplitude of the curves. These advancements highlight the significance of including the dura mater in biomechanical brain modeling. Incorporating the dura mater in Finite Element Head Models produces more realistic results than models without it. This emphasizes the importance of enhancing biomechanical models to better represent anatomical complexity.

Invasive macrophytes are considered problematic in natural environments and hydroelectric reservoirs. Climate changes, the occurrence of watercourses, and biotic interactions influence the biological invasion of macrophytes. Native species can correlate with invasives positively or negatively. Urochloa subquadripara is an invasive in natural or disturbed habitats co-occurring with the natives Eichhornia crassipes and Salvinia minima. Aquatic plant communities can be altered by climate change, so species distribution models (SDMs) are important tools for predicting in-vaded areas. This work aimed to make an SDM for U. subquadripara correlating with the poten-tial distribution of native species E. crassipes and S. minima. Occurrence data for U. subquadripara, E. crassipes, and S. minima were collected from databases and in consultation with the published literature. Parameters encompassing biological information of the species were entered into the CLIMEX software and used to generate the Ecoclimatic Index (EI). The species co-occurrence was performed based on multicriteria decision-making (MCDM), and weights were assigned using the analytical hierarchy process (AHP). It was observed that U. subquadripara, E. crassipes, and S. minima have a higher occurrence in tropical and subtropical regions; however, it is predicted that, from climatic changes, these species may move to high latitudes. According to climate change, the risk of invasion by U. subquadripara in the northern hemisphere is mainly in lakes, while in the southern hemisphere, the areas conducive to invasions are rivers and reservoirs. In general, emerging and floating macrophyte species such as U. subquadripara, E. crassipes, and S. minima will be favored, causing suppression of submerged species. Therefore, identifying the potential distribution of these species allows the creation of pre-invasion intervention strategies.

One of the challenges of deploying Wireless Sensor Networks (WSN) at large scale is to operate for prolonged periods of time relying on the limited amounts of energy stored in its nodes. Generally, data communication is the main factor of draining energy. Consequently, reducing the amount of transmitted data by the nodes is of great interest. At the same time, reducing data to be transmitted should not decrease the quality of the deduced information. Solving this problematic is what we call in this article "Ensuring the Quality of Information Service (QoIS)". This document provides a state-of-the-art for the QoIS regarding WSNs. At first, we give a quick overview of the Internet of Things (IoT) paradigm and the WSN technologies in order to understand how data is gathered and used in these networks. Also, we introduce a novel concept: QoIS, in contrast with classic QoS. Then, it is expected a summary of criteria that asses the QoIS in WSNs plus some techniques to improve it. In this article, we will focus on data management techniques. These techniques can improve raw data, information and/or knowledge quality in energy-constrained WSNs. Finally, we give some conclusions and a glimpse about our future work.

Cancer patients may experience significant distress. The “Emotion Thermometers” (ETs) are a short visual analogue scale used to screen patients for psychosocial risk. This study aimed to assess emotional distress in a large sample of cancer patients attending psychological services at an NGO, and to explore factors that may contribute to it. The ETs were answered by 899 cancer patients. They were, on average, 59.9 years old, the majority were female, had breast cancer, were under treatment or were disease-free survivors, and reported high levels of emotional distress, above the cut-off (≥5). A Generalized Linear Model was used to measure the association between the level of Distress and 33 items of the problem list. Four items - sadness, depression, sleep and breathing - were found to be significantly related to a higher level of Distress. Additionally, women and those who were in the palliative phase also had significantly higher levels of Distress. Conclusions: The results confirm the need for early emotional screening in cancer patients, as well as the relevance of attending to the characteristics of each patient. Additionally, they highlight the utility of the ETs for the clinical practice, allowing to optimize the referral to specialized psy-chosocial services.

This article presents a combined route and path planning strategy to guide Skid-Steer Mobile Robots (SSMRs) in scheduled harvest tasks within expansive crop rows with complex terrain conditions. The proposed strategy integrates: i) a global planning algorithm based on the Traveling Salesman Problem under the Capacitated Vehicle Routing approach and Optimization Routing (OR-tools from Google) to prioritize harvesting positions by minimum path length, unexplored harvest points, and vehicle payload capacity, and ii) a local planning strategy using Informed Rapidly-exploring Random Tree (IRRT*) to coordinate scheduled harvesting points while avoiding low-traction terrain obstacles. The global approach generates an ordered queue of harvesting locations, maximizing the crop yield in a workspace map. In the second stage, the IRRT* planner avoids potential obstacles, including farm layout and slippery terrain. The path planning scheme incorporates a traversability model and a motion model of SSMRs to meet kinematic constraints. Experimental results in a generic fruit orchard demonstrated the effectiveness of the proposed strategy. In particular, the IRRT* algorithm outperformed RRT and RRT* with 96.1% and 97.6% smoother paths, respectively. The IRRT* also showed improved navigation efficiency, avoiding obstacles and slippage zones, making it suitable for precision agriculture.

The Eurasian grapevine (Vitis vinifera L.) is the most widely grown horticultural crop in the world and is important for the economy of many countries. In the wine production chain, grape varieties play an important role as they directly influence the authenticity and classification of the product. Identifying the different grape varieties is therefore fundamental for quality control and inspection activities, as well as for regulating production. Currently, ampelography and molecular analysis are the main approaches to identifying grape varieties. However, both methods have limitations. Ampelography is subjective and prone to errors and is experiencing enormous difficulties as ampelographers are increasingly scarce. On the other hand, molecular analyses are very demanding in terms of cost and time. In this scenario, Deep Learning (DL) and Machine Learning (ML) methods have emerged as a classification alternative to deal with the scarcity of ampelographs and avoid molecular analyses. In this study, the most recent and current methods for identifying grapevine varieties using DL classification-based approaches are presented through a systematic literature review. The classification pipeline of the 31 studies found in the literature was described, highlighting its pros and cons. Most of the studies used DL-based models trained with leaf images acquired in a controlled environment at a maximum distance of 1.2 metres to classify grape varieties. In addition, there is a large gap between practical applications and the datasets used: a great lack of varieties, limited data acquired in the field and a lack of tests on plants under adverse conditions. Potential directions for improving this area of research were also presented.

Among the many Lysosomal Storage Disorders (LSDs) that would benefit from the establish-ment of novel cell models, either patient-derived or genetically engineered, is Mucopolysaccha-ridosis type II (MPS II). In fact, even though a specific therapeutic approach does exist for this disorder (Enzyme Replacement Therapy, ERT, with recombinant human IDS) and haematopoiet-ic stem cell transplantation (HSCT) may also hold promise whenever the disorder is diagnosed soon enough, both approaches have their own drawbacks. Here we present our results on the establishment and characterization of two MPS II pa-tient-derived stem cell line(s) from deciduous baby teeth. To the best of our knowledge, this is the first time a stem cell population is isolated from LSD patient samples obtained from the oral cavity. Taking into account our results on the molecular and biochemical characterization of those cells and our first insights on their subcellular MPS phenotype, we consider these cells will be a valuable tool for both pathophysiological assessments and drugs screenings. Ultimately, we believe patient-derived dental pulp stem cells (DPSC) may represent a feasible alternative to induced pluripotent stem cells (iPSC) in many labs with standard cell culture con-ditions and limited (human and economic) resources.

There is growing recognition of the adverse effects of body image dissatisfaction (BID) and eating disorder (ED) symptoms on adolescent health. The aim of this study was to estimate the prevalence of ED symptoms, BID, and their relationship in adolescents from public schools in Southern Brazil. A total of 782 schoolchildren (male: n=420, female: n=362); age: 15 ± 0,4 years) answered a self-administrated questionnaire to identify sociodemographic data. Children´s Figure Rating Scale was adopted to identify body image and Eating Attitudes Test (EAT-26) was applied to investigate ED symptoms. Inferential statistics and hierarchical model-controlled logistic regression were used for association between variables. Most of the schoolchildren reported being satisfied with their bodies. However, we observed a higher prevalence of dissatisfaction among girls for being overweight and thinness among boys. Female students and students from schools located in the central area of the city showed higher chances of developing ED symptoms, and the absence of symptoms of ED appeared to act as a protective factor against BID in schoolchildren. Results of this study show the need to reflect on these factors that influence the development of ED and non-acceptance of their own body in a population concerned with their physical appearance.

Targeted protein degradation is an attractive technology for cancer treatment due to its ability to overcome the unpredictability of small molecule inhibitors that cause resistance mutations. In recent years, various targeted protein degradation strategies have been developed based on the ubiquitin-proteasome system in the cytoplasm or the autophagy-lysosomal system during endocytosis. In this review, we describe and compare technologies for targeted inhibition and targeted degradation of the epidermal growth factor receptor (EGFR), one of the major proteins responsible for the onset and progression of many types of cancer. In addition, we have developed an alternative strategy, called alloAUTO, based on the binding of new heterocyclic compounds to an allosteric site located in close proximity to the EGFR catalytic site. These compounds cause targeted degradation of the transmembrane receptor, simultaneously activating both systems of protein degradation in cells. Damage to EGFR signaling pathways promotes inactivation of Bim sensor protein phosphorylation, which leads to disintegration of the cytoskeleton, followed by detachment of cancer cells from the extracellular matrix and, ultimately, to cancer cell death. This hallmark of targeted cancer cell death suggests an advantage over other targeted protein degradation strategies, namely that the fewer cancer cells survive, the fewer chemotherapy-resistant mutants appear.

Peripheral nerve injuries (PNI) can have several etiologies, such as trauma and iatrogenic interventions that can lead to the loss of structure and/or function impairment. These changes can cause a partial or complete loss of motor and sensory functions, physical disability, and neuropathic pain, what in turn can affect the quality of life. For those reasons, PNI is a major public health concern. This review aims to revisit the concepts associated with the PNI. First, the anatomy of the peripheral nerve is detailed to explain the different types of injury. Then, some of the available therapeutic strategies are explained, including surgical methods, pharmacological therapies, and the use of cell-based therapies alone or in combination with biomaterials in the form of tube guides. Nevertheless, even with the various available treatments, it is difficult to achieve a perfect outcome with complete functional recovery. This review aims to explain the urge for new approaches and to understand the methods to evaluate nerve regeneration in a One Health perspective. In vitro models followed by in vivo models are very important to be able to translate the achievements to human medicine.

: The objective of this study was to obtain different dry matter contents and proportions of mel-on plant biomass for silage making. A completely randomized design was adopted with a facto-rial scheme (3 x 2) in four replications. The first factor corresponded to three mixtures of melon biomass on as fed basis (AF) of plant (branch + leaf) and fruit (harvested melon) as follows: 100% plant, 90% plant + 10% fruit, and 100% fruit. The other factor corresponded to the ensiled materi-al with fresh and dehydrated melon plant biomass (40% DM) which was dried in the field, after harvest. Silages with partial dehydration of the biomass available after fruit harvest with 0% and 10% fruit showed the greatest DM values: 297 and 293 g/kg DM, respectively. Silages with 0, 100 and 10% fruit showed medium LAB populations: 5.79, 5.14 and 4.58 logs CFU/g, respectively. Higher concentrations of acetic acid contents were observed in silages with 0 and 10% fresh fruit, which were 14.9 and 14.1 g/kg DM, respectively. Silages with 0% and 100% of dehydrated fruit showed better results for the indicators of good-quality silage. Dehydration improves the fer-mentative profile and quality of the melon silage.

Whilst prior works have characterised the affordances of prototyping methods in terms of generating knowledge about a product or process, the types, or ‘dimensions’ of knowledge towards which they contribute are not fully understood. In this paper we adapt the concept of ‘design domains’ as a method to interpret, and better understand the contributions of different prototyping methods to design knowledge in new product development. We first synthesise a set of ten dimensions for design knowledge from a review of literature in design-related fields. A study was then conducted in which participants from engineering backgrounds completed a Likert-type questionnaire to quantify the perceived contributions to design knowledge of 90 common prototyping methods against each dimension. We statistically analyse results to identify patterns in the knowledge contributions of different methods. Results reveal that methods exhibit significantly different contribution profiles, suggesting different methods to be suited to different knowledge generation. Thus, this paper indicates potential for new methods, methodology and processes to leverage such characterisations for better selection and sequencing of methods in the prototyping process.

Metallic masters can be used as a metallic mold to replicate polymeric pieces with high resolution. Metallic masters with high resolution were created by photolithography technique and nickel electrodeposition technique. AZ 9260 photoresists and SPR 220-7.0 photoresists were used to coat metallic substrates and to compare results. Steel substrate and nickel substrate were used as the metallic substrate to compare results. Two different nickel electrodeposition protocols were used to compare results. In the conclusion section, was determined the best photoresist, metallic substrate, and nickel electrodeposition protocol to fabricate metallic masters.

The application of chitosan and alginate coatings for Ready-to-Eat (RTE) baked fish product were studied. An experimental design was used to investigate the effect of coating polysaccharide concentration and glycerol addition on the safety (microbial growth), and quality (water loss and lipid oxidation) of RTE seafood product under optimal, and abused storage conditions. The results showed that a chitosan coating with 1% (w/v) chitosan in 1% (v/v) acetic acid, and 15% (w/w chitosan) glycerol, or 1% (w/v) alginate coating with no glycerol, and no crosslinking showed the best performance in controlling the tested safety and quality parameters. Desirability method was used to identify the shelf life of chitosan, alginate and double coated RTE products. Whereby, chitosan coated samples showed the best performance with a third fold shelf life extension compared to uncoated products.

Nanomaterials such as pH-responsive polymers are promising for targeted drug delivery systems, due to the difference in pH between tumor and healthy regions. However, there is a significant concern about the application of these materials in this field due to their low mechanical resistance, which can be mitigated by combining these polymers with mechanically resistant inorganic materials such as mesoporous silica nanoparticles (MSN) and hydroxyapatite (HA). Mesoporous silica has interesting properties such as high surface area and hydroxyapatite has been widely studied to aid in bone regeneration, providing special properties adding multifunctionality to the system. Furthermore, fields of medicine involving luminescent elements such as rare earth are an interesting option in cancer treatment. The present work aims to obtain a pH-sensitive hybrid system based on silica and hydroxyapatite with photoluminescent and magnetic properties. The nanocomposites were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), nitrogen adsorption methods, CHN elemental analysis, Zeta Potential, scanning electron microscopy (SEM), and transmission electron microscopy (TEM), vibrational sample magnetometry (VSM), and photoluminescence analysis. Incorporation and release studies of the antitumor drug doxorubicin were performed to evaluate the potential use of these systems in targeted drug delivery. The results showed the luminescent and magnetic properties of the materials and showed suitable characteristics for application in the release of pH-sensitive drugs.

Medical and translational scientific research requires the use of animal models as an initial approach to the study of new therapies and treatments, but when the objective is an exploration of translational potentialities, classical models fail to adequately mimic problems in humans. Among the larger animal models that have been explored more intensely in recent decades, small ruminants, namely sheep and goats, have emerged as excellent options. The main advantages associated to the use of these animals in research works are related to their anatomy and dimensions very similar to those of humans in most physiological systems, in addition to their low maintenance and feeding costs, tendency to be docile, long life expectancies and few ethical complications raised in society. The most obvious disadvantages are the significant differences in some systems such as the gastrointestinal, and the reduced amount of data that limits the comparison between works and the validation of the characterization essays. Despite everything, recently these species have been increasingly used as animal models for diseases in different systems, and the results obtained open doors for their more frequent and advantageous use in the future. The purpose of this review is to summarize the general principles related to the use of small ruminants as animal models, with focus on regenerative medicine, to group the most relevant works and results published recently and to highlight the potentials for the near future in medical research.

Nanotechnology has become a popular topic in agricultural and animal research, generating sig-nificant global interest. Nanoparticles (NPs)-enabled agriculture and animal husbandry (AHs) products have three main principles: crop production, protection, and nutrient enrichment. Re-search on this topic has grown exponentially in recent years, with an increasing number of peer-reviewed literature and patents on NPs-enabled agriculture and AH products. This study examines and collects data on the various applications of NPs-enabled agricultural products for crop production, protection, and livestock improvement from the core nanotechnological database. The search returned several types of NPs and products used in agriculture and AH, countries that utilize these products at a commercial level, and analysis of these data by phyton, R-statistical software. Our findings show remarkable growth of nanotechnology in agriculture, AH, and re-search fields for future sustainability goals in the era of climate change

Hydrogels are water-absorbing polymers that can hydrate forage plants in the soil. The objec-tive was to evaluate the replacement of synthetic hydrogels derived from petroleum by biode-gradable hydrogels in Mombaça grass pastures (Megathyrsus maximum). The experimental treat-ments consisted of: No hydrogel (NH); Synthetic commercial hydrogel (CH), made from a syn-thetic polyacrylamide product; and Biodegradable test hydrogel (TH), obtained from cashew gum (Anacardium occidentale). The experimental design was randomized blocks with five replica-tions and three treatments. Morphogenesis, production, chemical and mineral composition of the Mombaça grass pasture were assessed. The data was subjected to analysis of variance and mean comparison by the Snott-Knott test at 5% probability. Leaf elongation rate was 42.3 mm day-1 in the TH treatment, which was higher (P<0.05) than NH (35.0 mm day-1). Green leaf mass yield was higher in TH in comparison to NH and CH. On the other hand, there was no effect of hydration on chemical composition. The mineral composition of Mombaça grass showed more Zn when TH was used. It can be concluded that biodegradable hydrogels can replace synthetic commercial hydrogels in pastures.

Background: The financial austerity policy imposed to Portugal by Troika - the European Commission, European Central Bank and International Monetary Fund in 2011, led to a tremendously social crisis. Under these dominant trends in Europe, which were felt especially in certain countries, such as Portugal, we feel ourselves forced into an analysis and reflection on the impact of this conjuncture in social workers, especially analyzing the role played by social workers and its critical consciousness relative to this neoliberal model and imposed austerity policies. Methods: This article results from an analysis of empirical data collected after the entry of Troika in Portugal, during 2013. Were conducted 26 in-depth interviews to front line social workers, with the purpose of obtaining a narrative of their daily work practice and with the concern of encouraging reflection on them. Results: Analysis shows the predominance of a maintenance role at the expense of more emancipatory approaches and thus, this results point to the relationship of this maintenance role with the sociological paradigm of social regulation and shows also, how social work is still attached to a conservative agenda. Secondly, one finds a weak critical reflection among social workers, being very afraid to speak out against the system, taking on a submissive attitude and subservient to the policies of social cuts imposed. The analysis then raises the challenge for social workers to develop a critical reflexivity Conclusion: The results highlight several important observations in terms of social woker role and that a critical activity is urgently required to social workers.

In the past decades, regenerative medicine applied on skin lesions has been a field of constant improvement for both human and veterinary medicine. The process of healing cutaneous wound injuries implicates a well-organized cascade of molecular and biological processes. However, sometimes the normal process fails and can result in a chronic lesion. In addition, wounds are considered an increasing clinical impairment, due to the progressive ageing of the population, as well as the prevalence of concomitant diseases, such as diabetes and obesity, that represent risk aggravating factors for the development of chronic skin lesions. Stem cells regenerative potential has been recognized worldwide, including towards skin lesion repair, Tissue engineering techniques have long been successfully associated with stem cell therapies, namely the application of 3D bioprinted scaffolds. With this review we intend to explore several stem cell sources with promising aptitude towards skin regeneration, as well as different techniques used to deliver those cells and provide a supporting extracellular matrix environment, with effective outcomes. Furthermore, different studies are discussed, both in vitro and in vivo, towards their relevance in the skin regeneration field.

Abstract: An attractive application of crude glycerol is in the generation of biomethane by means of anaerobic co-digestion, involving the decomposition of the organic matter in two or more substrates by bacteria and archaea, in the absence of oxygen. Thus, the objective of this work was to evaluate the potential of neural networks and fuzzy logic to predict the production of biomethane from the anaerobic co-digestion of glycerol and/or sugarcane molasses. Firstly, a reactor model was implemented using Scilab, with Monod kinetics involving two substrates and an intermediate (M2SI model), to generate a database for subsequent fitting and evaluation of neural and fuzzy models. The neural network package of Matlab was used. Fuzzy modeling was applied using the Takagi-Sugeno approach available in the ANFIS package of Matlab. The biomethane production results simulated by M2SI were used in neural network modeling, firstly employing a “generic” network applicable to all 8 scenarios. A very good fit was obtained (R²>0.99). Excellent performance was also observed for specific artificial neural networks (one for each condition). The parameters of the M2SI model for the 8 different conditions were also mapped using a neural network, as a function of the organic material composition. A fit with R²>0.99 was obtained using 25 neurons. In the case of the fuzzy logic, RMSE of 18.88 mL of methane was obtained with 216 rules, which was a value lower than 0.5% of the order of magnitude of the accumulated methane. It could be concluded from the results that fuzzy logic and artificial neural networks offer excellent ability to predict methane production, as well as to parameterize the M2SI kinetic model (using neural networks).

Reactive oxygen species (ROS) play an important role in biological processes and offer hope for the development of effective treatments for ROS-dependent diseases, including cancer. The interaction of hydrogen peroxide with proteins stimulates the creation of chemical molecules that can weaken or stop the pathological process in cancer. However, reliable drugs have not yet been described. To understand the reason for the failure, we studied the behavior of ROS-containing compounds in cancer cells. The epidermal growth factor receptor (EGFR) is activated by interaction with a ligand protein, as well as by binding the chemical structure of hydrogen peroxide to the catalytic cysteine in the intracellular domain. Both mechanisms trigger signaling pathways in cells. The EGFR can be inactivated by protein tyrosinase phosphatase PTP-1B, which itself is activated by hydrogen peroxide. A simple in-gel fluorescence technique was used to demonstrate the rapid binding of hydrogen peroxide to a large number of proteins, including both activating and inactivating target proteins. Natural defense systems take longer to action and apparently cannot prevent hydrogen peroxide from binding to protect cells from exposure to unwanted proteins. Therefore, superoxide dismutase, which produces hydrogen peroxide, is not a suitable target for disease therapy.

Agroforestry homegardens are integrated arrangements of common vegetable plants in areas close to residences, which follow a structure similar to that of tropical forests, with the cultivation of multiple species to meet the basic needs of families, such as the provision of food and medicine, as well as ensuring an environment for other family activities. Considering the importance of these environments, this work aimed to address the composition and use of plant species in agroforestry homegardens, in order to support society initiatives and government policies to strengthen the management of natural resources and individual and collective well-being in the region. For this, 119 homegardens were studied in the municipalities of Belterra, Mojuí dos Campos and Santarém, in the state of Pará, in the Brazilian Amazonia, comprising five different zones (peri-urban, urban, floodplain, indigenous land and tourist land), obtaining the data via questionnaires and guided visitation by the residents. A total of 5,323 vegetal individual plants were surveyed, distributed in 188 species and 62 botanical families. The data showed that 80.5% of the individual plants are concentrated in 18.6% of the species, with no significant difference in the average of species per homegarden in the five zones. The predominance of species for food use, primarily fruit-bearing, stands out, showing a possible direction for incentive actions and/or for the ordering of public policies and programs aimed at these spaces. Most homegardens have up to 17 plant species; less than half of homegardens have species intended for medicinal use; and there is percentage parity between native plant species and those of exotic origin, where native plants stand out for shading. Agroforestry homegardens play a crucial role in the conservation and cultivation of species for food purposes, with the cultivation or maintenance of plants based on their various purposes, showing distinct profiles of distribution and choice of species, evidencing their socioeconomic and environmental importance. Thus, it is important that these land use systems are valued, investing financial resources in actions and projects aimed at maintaining and enhancing their benefits for the region.

Advanced composite materials have drawn significant interest in the last years as an alternative to traditional materials due to their higher performance. However, industry struggle to provide low-cost, higher occupational safety, lower footprint with composites, making them suitable for holistic analyses. Therefore, the material design becomes an essential element that can impact the competitiveness, particularly in terms of productivity, circularity, safety, sustainability, and quality of the value chain. The Material Design-for-eXcellence is a state-of-art methodology for material performance multi-dimensional assessment along its life cycle phases, either useful to support ma-terial selection for new products or also to new material design support optimizing resource effi-ciency. In this methodology, the material behaviour and its multiple characteristics assessment, and the manufacturing processes efficiency are evaluated. The framework considers the analogy of product design holistic approaches, as Lean Design-for-X, to organize and assess the mul-ti-dimensional performance for each “X” Material Property. In this work, it was possible to observe that the bio-based composites solutions could be a good sustainable alternative for several sectors. Every day researchers are creating more new materials, having a diversity of properties at different scales, Material Design-for-eXcellence must also in the near future consider other factors. Hence, additional studies are thus foreseen to explore and develop this new tool.

This study analyzed the relationship between anthropometric measures, cardiorespiratory capacity, strength, power and local muscle endurance with performance in the CrossFit® Open 2020. For this, 17 volunteers (6 women) (29.0 ± 7.2 years; 70.5 ± 9.8 kg) completed, on separate weeks, body composition (dual-energy x-ray absorptiometry), maximal oxygen consumption (2km row test), muscle strength (1RM back and front squat, isometric peak torque), and muscle power (1RM snatch and clean &amp; jerk), and muscle endurance (Tibana test), which were compared with performance during the CrossFit® Open 2020. Multiple linear regression showed that for the CrossFit Open 2020.1 and 2020.2 workouts, the score in the Tibana test was the only variable that explained the outcomes (Beta = -0.78, p &lt; 0.01 for 2020.1 workout and Beta = 0.82, p &lt; 0.01 for 2020.2 workout). Performance in the CrossFit Open 2020.3 and 2020.4 workouts were explained through the relative strength (Beta = 0.58, p = 0.02 for 2020.3 workout and Beta = 0.50, p = 0.04 for 2020.4 workout). Lastly, Tibana test had the greatest influence on CrossFit Open 2020.5 workout (Beta = -0.75, p &lt; 0.01). A local muscle endurance and muscle strength may be used to predict CrossFit® open workout performance.

Exosomes have shown promising potential as a therapeutic approach for wound healing. Nevertheless, the translation from experimental studies to commercially available treatments is still lacking. To assess the current state of research in this field, a systematic review was performed to examine the methodological heterogeneity among studies conducted over the past five years. Additionally, the review analyzed the suitability of animal models used and their relevance to human medicine. A PubMed search was performed for english-language, full-text available papers published from 2018 to June 2023, focusing on exosomes derived from mammalian sources and their application in wound healing, particularly those involving in vivo assays. Out of 531 results, 148 papers were selected for analysis. The findings revealed significant variability in terms of cell sources and types, biomaterials, and administration routes under investigation, indicating the need for further research in this field. Additionally, a comparative examination encompassing diverse cellular origins, types, administration pathways, or biomaterials is imperative. Furthermore, the predominance of rodent-based animal models raises concerns, as there have been limited advancements towards more complex in vivo models and scale-up assays. These constraints underscore the substantial efforts that remain necessary before attaining commercially viable and extensively applicable therapeutic approaches using exosomes.

Marmosets from the Callithrix genus (six species) are anthropoids distributed in many Brazilian biomes, but anthropogenic pressure is a risk for hybridization and virtually the extinction of some species. Despite this, only a few data are available on reproductive ecology, which is a gap in understanding the physiological modulation of the socio-sexual behavior of free-ranging marmosets. In this study, we characterized fecal concentrations of progesterone, estrogens, and glucocorticoids of six breeding and non-breeding females from two groups of free-ranging C. penicillata, which is the species with the largest geographical distribution and most important in hybridization studies. The fecal progesterone was significantly higher in females who gave birth than non-breeding females, which was linked to reproductive status. The levels of fecal estrogens and glucocorticoids did not differ between breeding and non-breeding females. The data are according to the few studies on steroid values of free-ranging and captive marmosets. This study shows the concentrations of progesterone and glucocorticoids in free-ranging C. penicillata for the first time. Overall, the high levels of progesterone associated with pregnancy in free-ranging C. penicillata as well as levels of estrogens and glucocorticoids close to those reported for other species, suggest a conserved pattern of hormonal secretion between Callithrix species that have been studied in captivity.

The Covid-19 pandemic has resulted in the closure of schools at every level, globally, forcing education to move online. Meeting the needs of students online for Science Lab classes, in particular, is a challenge since the physical labs are not available to the teachers or students. OLabs is a virtual Science Lab providing a complete learning environment of theory, experimental procedures, videos, animations, simulations, and assessments that capture real lab experiences with the relevant pedagogy. This study looks at the acquisition and behaviors of users, on the OLabs platform, during pre and Covid-19 times. Using Google Analytics, we observe that, during the pandemic time, users increasingly adopted OLabs as a new learning pedagogy for performing experiments as indicated by parameters like the number of users; the number of unique pages viewed per session; time spent on viewing content; bounce rate; and preference for content types such as theory, simulations, videos, and animations.

Background. Until now, cost of allergy treatment in insured public health care system and non-insured self-financing private health care system in Indonesia has not been well documented and published, as well as the cost of allergy treatment with subcutaneous immunotherapy. Objective. To evaluate the clinical and cost benefits of allergic rhinitis treatment in children with subcutaneous immunotherapy in non-insured self-financing private health care system. Methods. A retrospective cohort study conducted from 2015 until 2020, compared clinical improvement and health care costs over 18 months in newly diagnosed AR children who received SCIT versus matched AR control subjects who did not receive SCIT, with each group consisting of 1,098 subjects Results. Decrease of sp-HDM-IgE level (kU/ml) from 20.5 + 8.75 kU/ml to 12.1 + 3.07 kU/ml had been observed in the SCIT group. To reduce the symptom score of allergic rhinitis by 1.0 with SCIT it costs IDR 21,753,062.7 per child, for non SCIT it costs IDR 104,147,878.0 per child. Meanwhile, to reduce the medication score (MS) by 1.0 with SCIT it costs Rp. 17,024,138.8 while with non SCIT it costs Rp. 104,147,878.0. Meanwhile, to lower combination symptoms and medication score (CSMS) by 1.0, with SCIT it costs IDR 9,550,126.6, while with non SCIT it costs IDR 52,073,938.9. Conclusion. In conclusion, this first Indonesia-based study demonstrates substantial health care cost savings associated with SCIT for children with AR in an uninsured private health care system and provides strong evidence for the clinical benefits and cost-savings benefits of AR treatment in children.

Little information is available in the literature on the use of cactus pear meal in poultry diets being important to evaluate diets that provide excellent performance and lower production costs. Our objective was to study the use of cactus pear meal in diets of laying hens. In the first study, two diets for male and female chicks were used - 1: 80% reference diet + 20% Miúda cactus pear meal (CPM) and 2: 80% reference diet + 20% Gigante cactus pear meal. The variety Miúda provid-ed better use of metabolizable energy, digestibility coefficient of dry matter, protein, and min-eral matter. In the second study, a control diet was compared to three diets with different levels of CPM for laying hens, in the proportions of 3%, 6% and 9%. No significant differences were found in productive performance. However, there were significant differences in egg quality, texture and color profile of the cooked yolk, egg composition, fatty acids and cholesterol in the yolk. It is possible to use 9% of CPM in the diet of laying hens in semi-intensive system not compromising performance and egg quality, and using 3% of CPM provides higher economic return.

With the latest advances in information and communication technologies, greater amounts of sensitive user and corporate information are constantly shared across the network making it susceptible to an attack that can compromise data confidentiality, integrity and availability. Intrusion Detection Systems (IDS) are important security mechanisms that can perform a timely detection of malicious events through the inspection of network traffic or host-based logs. Throughout the years, many machine learning techniques have proven to be successful at conducting anomaly detection but only a few considered the sequential nature of data. This work proposes a sequential approach and evaluates the performance of a Random Forest (RF), a Multi-Layer Perceptron (MLP) and a Long-Short Term Memory (LSTM) on the CIDDS-001 dataset. The resulting performance measures of this particular approach are compared with the ones obtained from a more traditional one, that only considers individual flow information, in order to determine which methodology best suits the concerned scenario. The experimental outcomes lead to believe that anomaly detection can be better addressed from a sequential perspective and that the LSTM is a very reliable model for acquiring sequential patterns in network traffic data, achieving an accuracy of 99.94% and a f1-score of 91.66%.

This research work uses a simplified approach to combine location information from beacons propagation signal interaction with a mobile device with local building information to give real-time location and guidance to a user inside a building. This is an interactive process with visualisation information that can help user’s orientation inside unknown buildings and the data stored from different users can provide useful information about users movements inside a public building. Beacons installed on the building at specific pre-defined position emit signals that give a geographic position with an associated imprecision, related with Bluetooth’s range. This uncertainty is handled by building layout and users’ movement in a developed system that maps users’ position, gives guidance and store user movements. This system is based on an App (Find Me!) for Android OS (Operating System) which captures the Bluetooth Low Energy (BLE) signal coming from the beacon(s) and shows, through a map, the location of the user ‘s smartphone and guide him to the desired destination. Also, the beacons can deliver relevant context information. The application was tested by a panel of new and habitual campus users against traditional wayfinding alternatives yielding navigation times about 30% smaller, respectively.

Dipteryx spp. is an important species in reforestation in the Amazon. The objective of this study is to characterize and compare the relationships between dendrometric variables in Dipteryx spp. stands in the Western Amazon by fitting linear regression equations for total height and crown diameter. Six forest stands were evaluated in three municipalities. Dendrometric variables collected included diameter at 1.3 m height (dbh), total height (ht) and crown diameter (dc). Simple and multiple linear regression equations were fitted to characterize the relationships between ht and dc. The total aboveground biomass of Dipteryx spp. trees and the carbon stock of the stands were estimated. The general equations showed higher R² values, exceeding 0.7. The general equations for estimating ht and dc were significant for all coefficients. The trees averaged 22 t/ha of aboveground biomass in the stands. There was a variation in carbon sequestration potential among stands, ranging from 5.12 to 88.91 t CO2.ha-1. Single-input equations using dbh as an independent variable are recommended for estimating dc and ht for individual Dipteryx spp. stands. Stands in the Western Amazon play a significant role in carbon sequestration and accumulation. Trees can sequester an average of 4.8 tons of CO2 per year.

Water footprint has been widely used to illustrate the consumption of water in many situations; for instance, in products, processes or regions of interest. In this work, we analyzed – using a sensitivity analysis approach – the effect of some variables in the calculation of the water footprint in the viticulture in Brazilian Serra Gaúcha (the major producing region of Brazilian Wine).The classical Penman-Monteith model for evapotransporation was considered, with uncertainties in some parameters (dead mulch covering fraction in the vineyard, maximum temperatures for some months, altitudes and latitudes of the site). The sensitivity analysis was conducted using the SAFE toolbox under Octave framework. The results indicated that the the portion of the water footprint corresponding to the evapotranspiration is more sensitive to the values of mulch covering fraction and the altitude of the site in comparison with the latitude and the maximum temperatures.

With the current technological transformation in the automotive industry, autonomous vehicles are getting closer to the Society of Automative Engineers (SAE) automation level 5. This level corresponds to the full vehicle automation, where the driving system autonomously monitors and navigates the environment. With SAE-level 5, the concept of a Shared Autonomous Vehicle (SAV) will soon become a reality and mainstream. The main purpose of an SAV is to allow unrelated passengers to share an autonomous vehicle without a driver/moderator inside the shared space. However, to ensure their safety and well-being until they reach their final destination, it is required an active monitoring of all passengers. In this context, this article presents a microphone-based sensor system that is able to localize sound events inside an SAV. The solution is composed of a Micro-Electro-Mechanical System (MEMS) microphone array with a circular geometry connected to an embedded processing platform that resorts to Field-Programmable Gate Array (FPGA) technology to successfully process in hardware the sound localization algorithms.

For the majority of the contractual arrangements used in construction projects, the owner is not responsible for the cost deviations due to the variability of labor productivity or material price, amongst many other aspects. Consequently, the cost performance of a project may be entirely distinct for the owner and the contractor. Since the majority of the quantitative research on cost estimation and deviation found in the literature adopts the owners’ perspective, this research provides a contribution towards modelling costs and cost deviation from a contractors’ perspective. From an initial sample of 13 residential building and 10 office building projects, it was possible to develop models for cost estimation at the early stage of development including both endogenous and exogenous variables. Although the sample is relatively small, the authors were able to fully analyze all the cost data, using no secondary sources of data (very frequent in cost modelling studies). The statistically significant variables in the cost estimation models were the areas above and below ground and the years following the 2008 financial crisis, including the international bailout (2011-2014) period. For estimating the unit cost, a nonlinear model was obtained with the number of underground and total floor, the floor ratio and the years following the 2008 financial crisis, including the international bailout (2011-2014) period as predictors. For the office buildings, it was also found a statistically significant correlation between the cost deviation and the number of underground floors.

Climate change in the coming decades could intensify extreme events such as severe droughts. Combined with the possible increase of water demands, these changes exert a large pressure on the water systems. In order to confirm this assumption, a set of scenarios was proposed in this study to consider the combined impact of climate changes and the increase in water demand on the main multiple-use reservoirs of São Francisco River, Brazil. For this purpose, five CMIP6 climate models were used considering two greenhouse gas emissions scenarios: the SSP2-4.5 and SSP5-8.5. The naturalized and withdraw streamflows were estimated to the adopted reser-voirs considering all existing, new and projected demands. The conjunction of scenarios indicat-ed an increase in Potential Evapotranspiration, a possible significant reduction in water availa-bility, a growth in water demand mainly for irrigation and a substantial reduction in the perfor-mance of the evaluated reservoirs.

Tyrosinases (TYR) play an important role in oxidizing phenols and catechols, leading to the formation of catechols and ortho-quinones, respectively. In mammals, TYR catalyzes the conversion of L-Tyrosine to quinone, a pivotal step in melanogenesis, which generates melanin pigments responsible for protecting against UV radiation and oxidative stress. Given TYR's importance in melanin-related disorders and cosmetic applications, the inhibition of TYR has garnered attention for controlling melanin production. However, current inhibitors like hydroquinone, arbutin, and kojic acid (KA) have limitations in terms of side effects and effectiveness. A novel class of TYR inhibitors featuring arylpiperidine and arylpiperazine components has demonstrated potent inhibitory activity. This study presents a computational analysis of these inhibitors using molecular docking, molecular dynamics (MD) simulations, and the Linear Interaction Energy (LIE) method was used to estimate binding free energies. The arylpiperidine and arylpiperazine inhibitors exhibit remarkable stability within the TYR active site during simulations. The van der Waals interactions are notably sustained, indicating effective inhibition mechanisms. The results from LIE calculations closely align with experimental binding affinities. In summary, these results contribute to the understanding of TYR inhibition and underscore the potential of arylpiperidine and arylpiperazine derivatives as effective agents for modulating melanin production in both cosmetic and pharmaceutical applications. Overall, this study sheds light on the intricate interactions between inhibitors and TYR, opening avenues for the development of novel therapies and interventions.

The concrete sector is known for its significant contribution to the CO2 emissions. There are two main contributing factors for this situation: the large amount of concrete consumed per year on the planet and the high CO2 released from Portland cement manufacture, the key binding agent in concrete. To face the consequent sustainability issues, diverse strategies have been explored on the carbon capture and storage potential of cementitious materials. This paper addresses the potential of storing CO2 in concrete during the curing stage, applied to the precast Portuguese industry. To this purpose, it was assumed that CO2 will become a waste that will require an outlet in the future, considering that carbon capture will become mandatory in many industries. This work concluded that the net benefit in terms of carbon retention is positive for the process of storing carbon in concrete during the curing stage. More specifically, it was demonstrated that the additional emissions from the introduction of this new operation are only 10% of the stored amount, returning a storage potential of 76 000 tonnes of CO2 yearly. Moreover, the overall net reduction in the concrete life cycle averages 9.4% and 8.8% for precast elements and only non-structural elements, respectively. When a low cement dosage strategy is coupled with carbonation curing technology, the overall carbon net reduction is estimated to be 45%.

The conditions for safe Internet access and the development of skills enabling full participation in online environments are recognized in the Council of Europe’s strategy for child rights, from 2022. The guarantee of this right has implications for experiences inside and outside the school context. Therefore, this article aims to compare the perceptions of students from different educational levels, who participated in a digital storytelling workshop, regarding online safety, searching habits, and digital competences. Data were collected through a questionnaire survey completed by 84 Portuguese students from elementary and secondary schools. A non-parametric multivariate analysis of variance was used to identify differences as children advance across educational stages. The results revealed that secondary students tend to spend more time online, and demonstrated more advanced search skills. Interestingly, the youngest children exhibited higher competences in creating games and practicing safety measures regarding online postings. These findings emphasize the importance of schools, in a joint action with the educational community, including parents, teachers and students, developing a coordinated and vertically integrated approach to digital education that considers the children's current knowledge, attitudes, and skills as a starting point for pedagogical intervention.

We consider an $N$ fermion system at low temperature $T$ in which we encounter special particle number values $N_m$ exhibiting special traits. These values arise in focusing attention upon the degree of mixture (DM) of the pertinent quantum states. Given the coupling constant of the Hamiltonian, the DMs stay constant for all $N$-values, but experience sudden jumps at the $N_m$. For a quantum state described by the matrix $\rho$, its purity is expressed by $Tr \rho^2$ and then the degree of mixture is given by $1 - Tr \rho^2$, a quantity that coincides with the entropy $S_q$ for $q=2$. Thus, Tsallis entropy of index two faithfully represents the degree of mixing of a state, that is, it measures the extent to which the state departs from maximal purity . Macroscopic manifestations of the degree of mixing can be observed through various physical quantities. Our present study is closely related to properties of many-fermion systemsn that are usually manipulated at zero temperature. Here we wish to study the subject at finite temperature. Gibbs' ensemble is appealed to. Some interesting insights are thereby gained.

The study describes the acute and delayed time course of recovery following the CrossFit® Benchmark Workout Karen. Eight trained men (28.4±6.4 years; 1RM back squat 139.1±26.0 kg) undertook the Karen protocol. The protocol consists of 150 Wall Balls, aiming to hit a target 3 meters high. Countermovement jump height (CMJ), creatine kinase (CK), and perceived recovery status scale (PRS) (general, lower and upper limbs) were assessed pre, post-0h, 24h, 48h and 72h after the session. The CK concentration 24h after was higher than pre-exercise (338.4 U/L vs. 143.3 U/L; effect size: 0.74; p≤0.05). At 48h and 72h following exercise, CK concentration had returned to baseline levels. The PRS general and of the lower limbs were lower in the 24-hours post-exercise compared to pre-exercise (PRS general: 4.7 ±1.5 and 7.9 ±1.7 mmol/L; and PRS of the lower limbs: 4.0 ±2.5 and 7.9 ±0.8, respectively). The PRS general, lower, and upper limbs were reduced at 48-post exercise compared to 72-hours post-exercise scores. Our findings provide insights into the fatigue profile and recovery in acute CrossFit® and can be useful to coaches effectively design the daily session.

Gas and power networks are tightly coupled and interact with each other due to physically interconnected facilities. In an integrated gas and power network, a contingency observed in one system may cause iterative cascading failures, resulting in network wide disruptions. Therefore, understanding the impacts of the interactions in both systems is crucial for governments, system operators, regulators and operational planners, particularly, to ensure security of supply for the overall energy system. Although simulation has been widely used in the assessment of gas systems as well as power systems, there is a significant gap in simulation models that are able to address the coupling of both systems. In this paper, a simulation framework that models and simulates the gas and power network in an integrated manner is proposed. The framework consist of a transient model for the gas system and a steady state model for the power system based on AC-Optimal Power Flow. The gas and power system model are coupled through an interface which uses the coupling equations to establish the data exchange and coordination between the individual models. The bidirectional interlink between both systems considered in this studies are the fuel gas offtake of gas fired power plants for power generation and the power supply to LNG terminals and electric drivers installed in gas compressor stations and underground gas storage facilities. The simulation framework is implemented into an innovative simulation tool named SAInt (Scenario Analysis Interface for Energy Systems) and the capabilities of the tool are demonstrated by performing a contingency analysis for a real world example. Results indicate how a disruption triggered in one system propagates to the other system and affects the operation of critical facilities. In addition, the studies show the importance of using transient gas models for security of supply studies instead of successions of steady state models, where the time evolution of the line pack is not captured correctly.

India is ranked 5th in world in terms of Covid-19 publications accounting for 6.7% of the total. About 60% of the Covid-19 publications in the year 2020 are from United States, China, UK, Italy, and India. We present a bibliometrics analysis of the publi-cation trends and citation structure along with identification of major research clusters. By performing network analysis of authors, citations, institutions, key-words, and countries, we explore semantic associations by applying visualization techniques. Our study shows lead taken by United States, China, UK, Italy, India in Covid-19 research may be attributed to the high prevalence of Covid-19 cases in those countries witnessing the first outbreak and also due to access to Covid-19 data, access to labs for experimental trials, immediate funding, and overall support from the govt. agencies. Large number of publications and citations from India are due to co-authored publications with countries like United States, UK, China, and Saudi Arabia. Findings show health sciences with highest the number of publications and citations, while physical sciences and social sciences and humanities counts were low. A large proportion of publications fall into the open access category. With India as focus, by comparing three major pandemics SARS, MERS, Covid-19 from biblio-metrics perspective, we observe much broader involvement of authors from multiple countries for Covid-19 studies as compared to SARS and MERS. Finally, by applying bibliometric indicators, we see an increasing number of sustainable develop-ment-related studies from the Covid-19 domain, particularly concerning the topic of good health and well-being. This study allows for a deeper understanding on how the scholarly community from a populous country like India pursued research in the midst of a major pandemic which resulted in closure of scientific institutions.

Gluten is a complex mixture of storage proteins in cereals like wheat, barley and rye. Prolamins are the main components of gluten. Their high content in proline and glutamine makes them water-insoluble and difficult to digest in the gastrointestinal tract. Partial digestion generates peptide sequences which trigger immune responses in celiac and gluten-sensitive patients. Gluten detection in food is challenging because of the diversity, in various food matrices, of protein proportions and their immunogenicity. Attempts to develop standard reference materials have been unsuccessful. We present here a summary of recent studies reporting the detection of dominant Gluten Immunogenic Peptides (GIP) sharing epitopes presented in the α-gliadin 33-mer, the most important celiac disease-immunogenic sequence within gluten. GIP were not only detectable and quantifiable in very different kind of difficult to analyze food, but also in stool and urine of celiac patients on a supposedly gluten-free diet (GFD), providing the first simple and objective means to assess adherence to the GFD. Methods to specifically and sensitively detect the most active GIP in food and biological fluids are rational candidates may use similar analytical standard references for determination of the immunopathological risk of gluten exposure in gluten-related diseases.

Earth is a complex material with a mechanical and physical behavior that differs from modern building materials. The conservation of rammed earth (RE) constructions presents specific difficulties that are challenging to overcome. The lack of knowledge about RE due to its abandonment for decades and attempts to adopt materials and repair methodologies designed for new building products has led to inadequate interventions. In the case of historic defensive constructions, the doubts and technical difficulties are even greater due to the nature of the so called military RE (with physical and mechanical characteristics significantly different from those of civil, more common, RE) and, not least, due to the historical and cultural heritage value of these constructions. Some important interventions have been carried out recently and others are underway or in the planning stage, and there is a constant lack of information and technical data on the best ways to intervene. To fill this gap, the state of conservation of the RE defensive structures and the results of interventions carried out throughout history in the southwest of the Iberian Peninsula are being assessed. This article sets out the framework of the subject, identifies the material and construction techniques, and recognizes the main causes of its deterioration and decay. With special focus on the most frequent damages detected in historic military defensive structures built with RE, it analyses and discuss the most common techniques that have been used for the repair and conservation of these particular structures.

Introduction: Studies conducted in real-life scenarios on vaccine protection against COVID-19 constitute an important global priority, but one that is currently mostly neglected in low- and middle-income countries such as Angola. Here, we analyze for the first-time vaccine protection against COVID-19 in a real-life scenario after 6 months of implementing a multi-vaccination plan in Angola, providing estimation of odds ratios in vaccinated individuals and vaccine efficacy against infection by SARS-CoV-2 in a period that coincided with the identification of the Omicron variant in the country. Methods: We used a negative test case-control design to assess the effectiveness of vaccination against confirmed SARS-CoV-2 infection. A total of 4.232 vaccinated and unvaccinated individuals with the result of a rapid antigen diagnostic test against SARS-CoV-2 performed from December 27 to 28, 2021 were included in the study. Data were extracted from the Digital Vaccination Record Platform (Rediv) of the Ministry of Health of Angola. All ethical procedures related to the authorization necessary to carry out the study were followed. Statistical analyzes were performed using version 7.5.2.0 of CDC's Epi Info. Frequency distributions and measures of central tendency were used to characterize the study universe. The general and sex-adjusted and age-adjusted odds ratios, were evaluated by comparing the chances of vaccination between cases and controls, and their associated 95% CI, which were calculated using the Mantel-Haenszel stratification method. The risk classification of Axel Kroeger, Piscoya and Alarcon was used to interpret the odds ratio. The Breslow-Day statistic was used to assess the homogeneity of the odds ratios. Vaccine efficacy was calculated using the odds ratio applying the accepted statistical vaccine efficacy formula:(1 − odds ratio) × 100. For all estimates, a P value < 0.05 was considered statistically significant. Results: The population consisted of 63.63% male and 36.37% female. The mean age was 36 years with a standard deviation of 13. 83. Regarding vaccination status, 83.27% of individuals were vaccinated and 16.73% were unvaccinated, with 21.81% positive and 78.19% negative for SARS -CoV-2. The odds of SARS-CoV-2 infection were 0.85 (95% CI 0.70 – 1.03) times lower in vaccinated compared to unvaccinated individuals, with P=0.09. The overall vaccine efficacy (VE) was 15% (95% CI -3 – 30). Conclusion: There was no statistically significant decrease in the chances of SARS-CoV-2 infection in vaccinated versus unvaccinated individuals. However, the overall vaccine efficacy was 15%.

In this study, using information theory tools, we investigate the quantum degree of mixedness, particle number fluctuations, and temperature variations in the paradigmatic Lipkin model, focusing on the interplay between these factors in a system of many fermions. Our analysis reveals intriguing dependencies of quantum mixedness on the total fermion number, showcasing distinct behaviors at different temperatures. Notably, we find that the degree of quantum mixedness exhibits a strong dependence on the total fermion number, with varying trends observed across different temperature regimes. Remarkably, this dependence remains unaffected by the strength of the fermion-fermion interaction (if it does not vanish, of course), underscoring the robustness of the observed phenomena. Through comprehensive numerical simulations, we provide illustrative graphs that depict these dependencies, offering valuable insights into the fundamental characteristics of many-fermion systems. Our findings shed light on the intricate dynamics of quantum degree of mixedness and particle number fluctuations in fermionic systems, with potential implications for diverse fields ranging from condensed matter physics to quantum information science.

In recent years, the advances in sperm morphology and genetic analyses in Perumytilus purpuratus allowed to suggest two evolutionary scenarios for this mussel: 1) the scenario of cryptic species and 2) the scenario of incipient or in progress speciation. To a better understanding of the evolutionary history of P. purpuratus, we performed an extensive sampling effort along a latitudinal gradient of ca. 7,180 km of coastline, from Southern Pacific to Atlantic Oceans and, we have also gone deeper in sperm morphology in P. purpuratus, exploring its association with phylogeny and population genetics to contrast if variability in sperm traits between northern and southern regions are signals of cryptic or incipient species. Overall, our results showed three sperm morphotypes and genetic structure in males of P. purpuratus strongly correlated. Additionally, we found evidence of a genetic admixture between lineages suggesting an introgressive hybridization zone at 38°S. These findings suggest the hypothesis that P. purpuratus is under incomplete reproductive isolation, with the presence of mechanisms of postzygotic isolation between lineages and, therefore, under an incipient or in fraganti speciation process. Finally, we discovered a new long morphotype for this species restricted to southern localities. Overall, our results support the hypothesis of historical events and postglacial recolonization as causal phenomena for the observed divergences.

This paper introduces a theory for the evolution of corporates in which the growth and sustainability strategies are developed simultaneously. Since the introduction of corporate sustainability, it has been an extra cost for risk mitigation and making ‘compensating’ positive impact. The world has reached a tipping point of volatility, mainly due to climate change but also by emergence of COVID-19, so that the applicability of existing corporate structures is under question and these poses high risk to the existence of our planet. On the other hand, the technology cost for sustainable investment has reached a parity in comparison with non-sustainable alternatives. Therefore, our proposed Organic Grow Theory introduces a step-by-step approach so that corporates can grow and be profitable without compromising the ability of future generations to meet their needs. It is concluded that, a new structure for corporate, called Founcorp, would be needed to direct corporates to evolve being a responsible legal entity.

In this research, the photocatalytic degradation of cypermethrin using Fe-TiO2 nanoparticles supported in a biomaterial was evaluated. The nanoparticles of TiO2 were synthesized by the green chemistry method assisted by ultrasound and doped by chemical impregnation using molar ratios Fe:Ti of 0, 0.05, 0.075 and 0.1, to make efficient use of direct sunlight (λ>310 nm). All nanoparticles were immobilized on the surface of spathe of coconut palm (Cocos nucifera). The degradation was carried out at room temperature and natural pH in a flat plate solar reactor, on which the composite material was subjected. The concentration of cypermethrin was determined after 12000 J/m2 of accumulated radiation from GC-MS and the resulting material was characterized by Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) image and selected area electron diffraction (SAED), Fourier transform infrared spectroscopy (FTIR), UV-Vis spectrophotometry of diffuse reflectance and BET surface area BET surface area. The best results were achieved with the use of Degussa TiO2 P-25, Fe:Ti=0 and Fe:Ti=0.05 in suspension, with percentages of degradation of cypermethrin of 99.84, 99.62, and 100%, respectively. However, the materials supported on the biomaterial of coconut, they allowed to reach degradation percentages higher than 80% with the advantage that it minimizes operating costs, since they are not necessary filtering or centrifuging processes to separate the catalyst.

Emergency is a health condition that poses an imminent risk to life. In this context, operations and triage protocols play an important role in the correct functioning of the Emergency Department, a key component of national health systems. The aim of the study was to explore and describe the experiences of a group of patients regarding emergency departments that use the Manchester Triage System, a triage protocol widely adopted in Europe. The research approach used was phenomenography, which allows us to explore in depth the diversity of experiences lived by a group of patients. The data was collected through semi-structured interviews and analysed to identify the categories that allows a qualitative description of patient’s experiences. The results are structured in the following categories: “Healthcare professional roles“, “Waiting time to be cared“, “Triage protocol“ and “Emergency department utilization“. These results can be used to improve the way patients experience emergency situations and to contribute to increasing knowledge about the impact of emergency departments and triage protocols on patients.

Obesogens have been identified as a significant factor associated with increasing obesity rates, particularly in developed countries. These substances with obesogenic traits are prevalent in consumer products, including certain pharmaceuticals. Specific classes of pharmaceuticals have been recognized for their ability to induce weight gain, often accompanied by hormonal alterations that can adversely impact male fertility. Indeed, research has supplied evidence underscoring the crucial role of obesogens and therapeutic agents in the normal functioning of the male reproductive system. Notably, sperm count, and various semen parameters have been closely linked to a range of environmental and nutritional factors, including chemicals and pharmacological agents exhibiting obesogenic properties. This review aims to explore studies focused on analyzing male fertility parameters, delving into the intricacies of sperm quality, and elucidating the direct and adverse effects that pharmacological agents may have on these aspects.

This paper makes a theoretical contribution by exploring the integration of sustainability principles into project management. It compares two recent methodologies, PM² and PRiSM^TM, and provides a practical contribution by advocating for the adoption of these sustainability-driven practices among practitioners. Sustainability remains relatively unknown in the realm of project management, and this research aims to bridge that gap. The study follows an interpretivist philosophy and employs a combination of interviews and archival data analysis. PM², created by the European Commission, provides a project management methodology free to organizations and includes best practices from other bodies of knowledge. However, it doesn't include sustainability, because it aims to be generic. PRiSM^TM, based on the P5™, aims to make the project management process more sustainable. PRiSM^TM has P5 Impact Analysis and Sustainability Management Plan as the main differentiating deliverables and is an extension of the Triple Bottom Line, also including product and process. The PM² Alliance CEO believes that PM² aims to be generic, so a focus on sustainability would remove the methodology's "elasticity". However, users wishing to use PM² and consider sustainability can include it in the additional objectives and use PRiSM^TM differentiating deliverables.

Patients with heart failure have difficulty in self-care management, as daily monitoring and recognizing symptoms do not readily triggers an action to avoid hospital admissions. The purpose of this study was to understand the impact of a nurse-led complex intervention on symptom recognition and fluid restriction. A latent growth model was designed to estimate self-care management and quality of life changes on patients with heart failure and assessed by a pilot study, for three months, to sixty-three patients (33 control, 30 intervention). Patients in the control group had a higher risk of hospitalisation (IRR 11.36; p<.001) and emergency admission (IRR 4.24; p<.001) at three-months follow-up. Analysis of the time scores demonstrated that the intervention group had a clear improvement in self-care behaviours (βSlope. Assignment_group=-.881; p<.001) and in the quality of life (βSlope. Assignment_group=1.739; p<.001). This study supports that a nurse-led program on symptom recognition and fluid restriction can have a positive impact on self-care behaviours and quality of life in patients with heart failure.

Patients with heart failure have difficulty in self-care management, as daily monitoring and recognizing symptoms do not readily trigger an action to avoid hospital admissions. The purpose of this study was to understand the impact of a nurse-led complex intervention on symptom recognition and fluid restriction. A latent growth model was designed to estimate self-care management and quality of life changes on patients with heart failure and assessed by a pilot study, for three months, to sixty-three patients (33 control, 30 intervention). Patients in the control group had a higher risk of hospitalisation (IRR 11.36; p<.001) and emergency admission (IRR 4.24; p<.001) at three-months follow-up. Analysis of the time scores demonstrated that the intervention group had a clear improvement in self-care behaviours (βSlope. Assign-ment_group=-.881; p<.001) and in the quality of life (βSlope. Assignment_group=1.739; p<.001). This study supports that a nurse-led program on symptom recognition and fluid restriction can have a positive impact on self-care behaviours and quality of life in patients with heart failure.

The augmenting commitment in the entrepreneurial learning process, both at academic and industry level, has led to new mechanisms and methodologies. Entrepreneurship literature has shown evidence of raising interest in the problem-based learning (PBL) methodology with regard to upcoming events from the surrounding learning context. This paper presents a Systematic Bibliographic Literature Review (SBLR) with respect to the application of PBL throughout distinct entrepreneurial processes either in higher education, or in industry. It aimed to identify relevant entrepreneurial opportunities for PBL. Bibliographic databases were searched for documents published between 2002 and May 2024 to categorize key topics discussed in the literature on PBL and entrepreneurship. The review process identified 142 empirical and non-empirical papers on entrepreneurship related PBL. Data analysis revealed diverse subthemes for PBL uses in entrepreneurship in both higher education institutions and industry. The research questions “What is the interplay of problem-based learning methodology with entrepreneurship?” guided the study. The central output of the research is the discovery of the varying uses of PBL to cope with diverse events arising within entrepreneurship context. Future research directions are suggested.

The importance of shifting to a sustainable economy, based on new capabilities that enable to cope with the current turbulent changes is paramount. Entrepreneurs with sustainable concerns are considered to play a key role in the process by creating innovative, proactive and risk assumption solutions, both with environmental and economic value. To date, there is no consensus on what capabilities education should provide to create sustainable entrepreneurs to cope with sustainability challenges. The aim of this piece of literature is to identify relevant factors for sustainable entrepreneurship education. Bibliographic databases were searched for documents published between 2012 and June 2023 to categorize central issues discussed in the literature on sustainable entrepreneurship education. The review process specifies 59 empirical and non-empirical papers at sustainable entrepreneurship education (SEE). Data analysis revealed diverse models for sustainable entrepreneurship education (SEE) developed for use in both higher education institutions and secondary schools. Future research directions are underscored.

The importance of transforming to a sustainable economy to protect against global crises such as climate change is widely recognized. Sustainable entrepreneurs are seen as playing a key role in this transformation process by creating innovative market solutions with environmental, social, and economic value. To date, there is no consensus on the skills education should deliver to create sustainable entrepreneurs to solve sustainability challenges. The goal of this article is to identify sustainable entrepreneurship education factors that enable effective education of future sustainable entrepreneurs. An academic search engine and bibliographic database were searched for documents written in English and published between 2012 and April 2023 to identify existing educational models discussed in the current literature in sustainable entrepreneurship education (SEE). The review process resulted in a set of 59 empirical and non-empirical papers on SEE. The data analysis revealed different educational frameworks for sustainable entrepreneurship (SE), both developed for use in higher education institutions and secondary schools.

Nowadays, people live amidst the smart home domain, business opportunities in the industrial smart city and health care, though, along with concerns about security. Security is central for IoT systems to protect sensitive data and infrastructure, whilst security issues become increasingly expensive, in particular in Industrial Internet of Things (IIoT) domains. Nonetheless, there are some key challenges for dealing with those security issues in IoT domains: Applications operate in distributed environments such as Blockchain, varied smart objects are used, and sensors are limited in what comes to machine resources. In this way, traditional security does not fit in IoT systems. In this vein, the issue of cyber security has become paramount to the Internet of Things (IoT) and Industrial Internet of Things (IIoT) in mitigating cyber security risk for organizations and end users. New cyber security technologies / applications present improvements for IoT security management. Nevertheless, there is a gap on the effectiveness of IoT cyber risk solutions. This review article discusses the, trends around opportunities and threats in cyber security for IIoT.

Diverse forms of artificial intelligence (AI in further text) are at the forefront of triggering digital security innovations, based on the threats that are arising in this post COVID world. On the one hand, companies are experiencing difficulty in dealing with security challenges with regard to a variety of issues ranging from system openness, decision making, quality control and web domain, just to mention a few. On the other hand, in the last decade, research has focused on security capabilities based on tools such as platform complacency, intelligent trees, modeling methods and outage management systems, in an effort to understanding the interplay between AI and those issues. The dependence on the emergence of AI in running industries and shaping the education, transports and health sectors is now well known in literature. AI is increasingly employed in managing data security across economic sectors. Thus, a literature review of AI and system secu-rity within the current digital society is opportune. This paper aims at identifying research trends in the field through a Systematic Bibliometric Literature Review (LRSB) of research on AI and system security. The review entails 77 articles published in Scopus® database, presenting up-to-date knowledge on the topic. The LRSB results were synthesized across current research subthemes. Findings are presented. The originality of the paper relies on its LRSB method, together with extant review of articles that have not been categorized so far. Implications for future re-search are suggested.

The genus Clostridium is an important group of pathogenic and nonpathogenic Gram-positive anaerobic bacteria with sporulation capacity and wide distribution in different environments, including the gastrointestinal tract of healthy and diseased animals and humans. Among the pathogenic species of the genus, Clostridium chauvoei stands out as a histotoxic agent. It causes important myonecroses such as blackleg, a disease with high lethality and mortality, especially in young cattle, and is responsible for significant losses to livestock worldwide. The pathogenic-ity of the disease is complex and has not yet been fully elucidated. The hypotheses cover pro-cesses from the initial absorption to the transport and deposition of the agent in the affected tis-sues. The virulence factors of C. chauvoei were divided into somatic and flagellar antigens and soluble antigens/toxins, which are the main antigens involved in vaccines against blackleg in Brazil and worldwide. This review provides important information on the first and current ap-proaches to the agent C. chauvoei and its virulence factors, as well as provides a compilation of data on Brazilian studies related to blackleg.

Since people spend most of their time in indoor environments, the objective of this work was to study indoor air quality perception and its effects on users’ thermal comfort. Based on previous data from a building with a central air-conditioning system and two mixed-mode buildings located in the humid subtropical climate of Florianópolis, southern Brazil, statistical analyses were performed. Each user subjective answer obtained through a questionnaire was combined with the corresponding environmental conditions – measured using microclimate stations, a portable thermo-anemometer and a CO2 analyser. Results showed that improvement in air quality was associated with the reduction of air temperature and humidity ratio. Also, there was a significant influence of thermal, air movement and humidity sensation and acceptability of air quality perception. Users felt more satisfied or neutral with air quality for being in thermal comfort, and not because of the CO2 level – which means that air quality perception is influenced by factors other than CO2. This study recommends the implementation of an air exchange device in split air-conditioners with air recirculation used in mixed-mode buildings in Brazil. It is important to provide suitable indoor ventilation to reduce pollutants concentration, ensure good air quality and prevent respiratory diseases.

The supply of mental health processes in primary care has gaps. This study aims to analyze the association of agreement criteria and flows between primary care teams and the Family Health Support Center (NASF) for mental health collaborative care, considering the difference between capital and non-capital cities in Brazil. This cross-sectional study was conducted based on secondary data from the Primary Care Access and Quality Improvement Program. Agreement criteria and flows were obtained from 3883 NASF teams of the matrix support or collaborative care. The Chi-square test and multiple Poisson regression were used; p &lt; 0.05 was considered statistically significant. Prevalence ratios of negative associations demonstrated protective factors for support actions: follow-up at Psychosocial Care Center, management of psychopharmacotherapy, offer of other therapeutic actions, care process for users of psychoactive substances, and offer of activities to prevent the use of psychoactive substances. Collaborative care in primary care was effective, and capital cities were a protective factor compared with non-capital cities.

Oral mucositis is most frequently a toxic effect of chemotherapeutic and/or radiotherapeutic treatment, resulting from complex multifaceted biological events involving DNA damage. The clinical manifestations have a negative impact on the life quality of cancer patients. Preventive measures and curative treatment of mucositis are still not well established. The glycine has anti-inflammatory, immunomodulatory and cytoprotective actions, being a potential therapeutic in mucositis. The objective was to evaluate the effects of glycine on the expression of collagen and growth factors, platelet and epidermal in oral mucositis. The mucositis of which was induced by the protocol of Sonis. 40 hamsters were used, divided into two groups: Group I- control; Group II- supplemented with 5% intraperitoneal glycine, 2,0 mg/g diluted in hepes. Histopathological sections were used to perform the immune-histochemical method, the evaluation collagen expression and the growth factors: EGF and PDGF. It was observed that the group supplemented with glycine higher amounts of collagen expression and predominance type of collagen I. The glycine group presented lower immunoexpression of the growth factors, EGF and PDGF. The group supplemented with glycine showed a marked healing process of the oral mucosite, demonstrated by the predominance of collagen type I and reduction of growth factors, EGF and PDGF.

Strawberry is produced in tropical regions using imported cultivars adapted to temperate and subtropical climates. These cultivars, under tropical conditions, produce below their genetic potential. Through multivariate analyses, the objective was to evaluate and select short-day strawberry genotypes based on intraspecific crosses, product characteristics, and fruit quality. The genotypes were obtained from the cross between 'Camino Real' (female parent) and the first-generation genotypes RVCA16, RVCS44, RVFS06, RVFS07, and RVDA11 (male parent), obtained in previous selections. The experimental design consisted of augmented blocks with standard controls, consisting of first-generation genotypes and commercial cultivars. The fruits were harvested and evaluated for productivity and post-harvest characteristics: Total Fruit Mass (MTF); Total Number of Fruits (TFN); Average Fruit Mass (AFM); Commercial Fruit Mass (CFM); Fruit Commercial Number (CFN); Average Commercial Mass of Fruits (ACFM); Total Soluble Solids (TSS); Firmness (F); Brightness (L); Hue Angle (°Hue); Chroma (C). The selection index of Mulamba and Mock (1978) was used with an intensity of 3% to obtain superior genotypes and submitted to multivariate analysis for comparative purposes. Of the 1500 genotypes evaluated, it was possible to select 44 genotypes with characteristics superior to the 13 controls. The RVDA11CR59 genotype showed better values for the attributes of interest, but the RVCS44CR population, from the cross between 'Camino Real' × RVCS44 ('Camarosa' × 'Sweet Charlie'), obtained the highest number (16) of individuals among those selected. Significant traits had high heritability but were not necessarily reflected in high selection gain. Coefficients of genetic variation were high, indicating sufficient genetic variability to select genotypes for these traits. When multivariate analyses were used, it was possible to group the selected genotypes into the same cluster according to the similarity and balance in the responses to the evaluated variables, demonstrating that these analyses help other parameters choose superior genotypes. The multivariate analysis allowed the selection of more balanced genotypes for production and post-harvest traits for tropical climates.

Mechanical recycling of solid plastic wastes on a small-scale level can be accomplished with the correct approaches. Thermoplastics are mostly considered for mechanical recycling because of their physical properties and ease of reprocessing. This paper reviews the mechanical reprocessing techniques of selected thermoplastics (polyethylene terephthalate and polyolefins) since they constitute a significant proportion of plastics used commercially. Furthermore, necessary considerations for effective operation of small-scale plants, including energy requirements of machinery and optimisation in order to improve efficiency and product quality, are discussed. A clearer understanding and addressing of the process-related challenges will lead to successful establishment and management of small-scale mechanical recycling facilities to benefit communities. Efficient small-scale mechanical reprocessing establishments have become essential in reducing the environmental impacts of solid plastic wastes and for energy conservation.

In the field of embedded systems, energy efficiency is a critical requirement, particularly for battery-powered devices. RISC-V processors have gained popularity due to their flexibility and open-source nature, making them an attractive choice for embedded applications. However, not all RISC-V processors are equally energy-efficient, and it is important to evaluate their performance in specific use cases. This paper evaluates the energy consumption and resource utilization of a new RISC-V processor, RisCO2, and four existing processors - Zero-riscy, Micro-riscy, Ri5cy, and CV32E40P - in a signal demodulation application for NDIR CO2 sensors. The processors were implemented in the PULPino SoC and synthesized using Vivado IDE. The processor named RisCO2 is based on the RV32E_Zfinx instruction set and was designed from scratch by the authors specifically for low-power signal processing applications such as signal demodulation in CO2 NDIR sensors. The other processors are Ri5cy, Micro-riscy, and Zero-riscy, developed by the PULP Platform team, and CV32E40P (derived from Ri5cy) from the OpenHW Group, all of them widely used in the RISC-V community. Our experiments showed that RisCO2 had the lowest energy consumption among the five processors, with a 53.5% reduction in energy consumption compared to CV32E40P and a 94.8% reduction compared to Micro-riscy. Additionally, RisCO2 had the lowest FPGA resource utilization compared to the best-performing processors, CV32E40P and Ri5cy, with a 46.1% and a 59% reduction in LUTs, respectively. Our findings suggest that RisCO2 is a highly energy-efficient RISC-V processor for NDIR CO2 sensors that require signal demodulation. The results also highlight the importance of evaluating processors in specific use cases to identify the most energy-efficient option. This paper provides valuable insights for designers of energy-efficient embedded systems using RISC-V processors.

Aim: Child-to-parent offenders (CPOs) are commonly specialist offenders and with high rates of recidivism. Thus, a field study was designed to estimate the prevalence in the reference measures of recidivism i.e., dangerousness, risk factors and psychopathy, and compare CPOs with non-child-to-parent juvenile offenders. Method: 136 juvenile offenders (76.5% boys), 76 CPOs and 60 non-CPOs juvenile offenders, aged from 14 to 18 years old, were measured in dangerousness, risk of factors and psychopathic traits. Results: The results showed in CPOs a more than common prevalence (&gt; .50), 75.0%, 95% CI [.653, .847], of dangerousness (caseness); a significant prevalence (&gt; .05) of diagnostic of psychopathy, 25.0%, 95% CI [.150, .350]; and a common prevalence (= .50), 55.3%, 95% CI [.441, .665] of classification as high and very high risk by risk factors. Comparatively, no significant differences were observed between CPOs and non-CPOS juvenile offenders in mental health problems (dangerousness), meanwhile that CPOs exhibited significant more interpersonal and affective psychopathic traits and significant more risk in family circumstances, and personality and behaviour risk factors. Conclusions: The implications for prevention and intervention programs with CPOs are discussed

Brazil chicken production is around 13 million tons and about a third is exported to over 150 countries, placing Brazil as the world largest chicken meat producer, and therefore it is crucial to follow the legislation of all importer markets. This study conducted a survey by chance in 45 meat industries able to export. Therefore, 2580 chicken meat samples were collected and submitted to 11 analyte extraction and chromatographic verification of compliance in an accredited laboratory. Ten chemical residues (amoxicillin, bacitracin, colistin, dinitolmide + zoalene, spectinomycin, roxarsone, tiamulin, tylosin, trenbolone acetate and virginiamycin) were investigated in chicken meat and one (halofuginone hydrobromide) in chicken liver. The results showed that no compound exceeded the maximum residue limits established by seven legislations. All residue concentrations found were below the method quantification limit, thereby confirming the capability of Brazilian chicken meat industries in complying to foreign markets.

(1) Background: tuberculosis (TB) is considered one of the leading causes of death by a single in-fectious agent worldwide. This study aimed to identify hotspots of people diagnosed with tu-berculosis and abusive use of alcohol, tobacco and other drugs in communities through a geo-spatial intelligence application; (2) Methods: ecological study with a spatio-temporal approach. We considered tuberculosis cases diagnosed and registered in the Notifiable Diseases Information System, which presented information on alcoholism, smoking, and other drugs. Spatial Variations in Temporal Trends (SVTT) and scan statistics were applied for the identification of Hotspots; (3) Results: of 29.499 cases of tuberculosis were identified. And when we applied the STTT for al-coholism, three Hotspots were detected, one of which was protective (RR: 0.08 – CI95%: 0.02 – 0.32) and two at risk (RR:1.42 – CI95%: 1.11 – 1.73; RR: 1.39 - CI95%: 1.28 – 1.50). Regarding smoking, two risk clusters were identified (RR: 1.15 - CI95%: 1.01 – 1.30; RR: 1.68 - CI95%: 1.54 – 1.83). For other drugs, a risk cluster was found (RR: 1.13 - CI95%: 0.99 – 1.29) and two protections (RR: 0.70 - CI95%: 0.63 – 0.77; RR: 0.76 – CI95%: 0.65 – 0.89); (4) Conclusions: it was evidenced in the communities a problem of TB and drug addiction. Use disorder perhaps in a person's brain and behavior and leads to an inability to continue their treatment, putting the community at risk for TB.

Renewable energy sources are increasingly crucial for meeting global energy demands in an eco-friendly manner, particularly as the world shifts away from fossil fuels and faces higher volatility of the market prices. Portugal, a country with limited fossil fuel reserves and high energy dependency, has heavily invested in renewables in recent years. However, renewables like sunlight, wind, and water are inherently unsteady due to climate influences, resulting in energy production fluctuations. To mitigate this issue, energy storage systems are being deployed to stabilize renewable energy supply during production lulls. This project aims to assess an energy storage system and define technical specification in order to maximize profitability at the Finerge-owned Alto Douro wind farm. To achieve this, we've conducted an energy demand analysis, followed by simulations to assess system performance in relation to energy use and profit, while varying parameters such as power and efficiency. We've also compared commercial proposals from different battery manufacturers utilizing various technologies. Our findings suggest that high-power, quick charge-discharge lithium-ion batteries are the most suitable solution, given their efficiency and modularity. These attributes are vital for achieving current and future profitability.

This article introduces simulations of theoretical material with controlled properties for the evaluation of the effect of key parameters, as volumetric fractions, elastic properties of each phase and transition zone on the effective dynamic elastic modulus (Ed). The accuracy level of classical homogenization models was checked regarding the prediction of Ed. Numerical simulations were performed with finite element method (FEM) for evaluations of the natural frequencies and their correlation with Ed, through frequency equations. An acoustic test validated the numerical results and obtained the elastic modulus of concretes and mortars at 0.3, 0.5 and 0.7 water-cement ratios (w/c). Hirsch calibrated according to the numerical simulation (x = 0.27) exhibited a realistic behavior for concretes of w/c = 0.3 and 0.5, with 5% error. Nevertheless, for w/c = 0.7, Ed approached Reuss model, similarly to theoretical triphasic materials. Hashin-Shtrikman bounds is not perfectly applied to theoretical biphasic materials under dynamic situations.

Diaminomaleonitrile (DAMN) is an electron-rich ligand which is commonly used in the synthesis of purines, amides and Schiff base ligands. In the last case lies the interest in this molecule, given its symmetry and apparent facility to form various ligands and complexes of interest in fields such as organic solar cells and catalysis among others. Nevertheless, its bisubstitution with aldehydes displays certain difficulty due to the double conjugated presence of the nitrile group (C≡N) in its structure, which significantly affect its coordination behavior by modulating the chemical reactivity of its amines. In addition to presenting a practical resume of guidelines for the preparation of different bisubstituted compounds from DAMN, this paper reviews the possibility of attaining a precise characterization by simple spectroscopic techniques. We provide an additional discussion for one of these techniques (commonly reported but often overlooked), given its potential to provide both the symmetry and E/Z configuration of the product. We hope the comprehensive evidence discussed and shown in this review will be helpful to further develop and understand the products derived of this interesting molecule in their broad applications.

This study explores the impact of temperature and molarity on the pyrolysis of Açaí seeds (Euterpe Oleraceae, Mart.) activated with KOH on the yield of bio-oil, hydrocarbon content of bio-oil, antioxidant activity of bio-oil and chemical composition of aqueous phase. The experiments were carried out at 350, 400, and 450 °C and 1.0 atmosphere, with 2.0 M KOH, and at 450 °C and 1.0 at-mosphere, with 0.5 M, 1.0 M and 2.0 M KOH, in laboratory scale. The composition of bio-oils and aqueous phase determined by GC-MS, while the acid value, a physical-chemical property of fundamental importance in biofuels, of bio-oils and aqueous phases by AOCS methods. The antioxidant activity of bio-oils determined by the TEAC method. The solid phase (biochar) characterized by X-ray diffraction (XRD). The diffractograms identified the presence of Kalicinite (KHCO3) in bio-char, and those higher temperatures favor the formation peaks of Kalicinite (KHCO3). The pyrolysis of Açaí seeds activated with KOH show bio-oil yields from 3.19 to 6.79 (wt.%), aqueous phase yields between 20.34 and 25.57 (wt.%), solid phase yields (coke) between 33.40 and 43.37 (wt.%), and gas yields from 31.85 to 34.45 (wt.%). The yield of bio-oil shows a smooth exponential increase with temperature. The acidity of bio-oil varied between 12.3 and 257.6 mgKOH/g, decreasing exponentially with temperature, while that of aqueous phase between 17.9 and 118.9 mgKOH/g, showing and exponential decay behavior with temperature, demonstrating that higher temperatures favor not only the yield of bio-oil but also bio-oils with lower acidity. For the experiments with KOH activation, the GC-MS of bio-oil identified the presence of hydrocarbons (alkanes, alkenes, cycloalkanes, cycloalkenes, and aromatics) and oxygenates (carboxylic acids, phenols, ketones, and esters). The concentration of hydrocarbons varied between 10.19 to 25.71 (area.%), increasing with temperature, while that of oxygenates from 52.69 to 72.15 (area.%), decreasing with temperature. For the experiments with constant temperature, the concentrations of hydrocarbons in bio-oil in-crease exponentially with molarity, while those of oxygenates decrease exponentially, showing that higher molarities favor the formation of hydrocarbons in bio-oil. The antioxidant activity of bio-oils decreases with increasing temperature, as the content of phenolic compounds decreases, and de-creases with increasing KOH molarity, as higher molarities favors the formation of hydrocarbons. Finally, it can be concluded that chemical activation of Açaí seeds with KOH favors the not only the yield of bio-oil but also the content of hydrocarbons. The study of process variables is of utmost importance in order to clearly assess reaction mechanisms, economic viability and design goals that could be derived from chemically activated biomass pyrolysis processes.

Development of non-conventional hybrids (NCHs) responds to the demand for the Elotes Occidentales 'EO' race for production of pozole. The effect of: crop cycle (2019, 2020 and 2021) on physical characteristics, flowered grain quality and phytochemical content of two HNC (Pz1 and Pz2) of pozolero maize, as well as the effect of the presence or absence of pedicel, type of pollination (open and controlled, 2019), and progenitor lines (female and male, 2020) on flowered grain quality and content of phytochemical compounds were evaluated. Size, hardness, color, total phenols and anthocyanins in unprocessed grain were determined, and yield, volume and puncture strength in flowered grain. Results were analyzed with a factorial arrangement in a completely randomized design. There were significant differences (p≤0.05) in most of the variables studied by effect of crop cycle and genotype. NCHs had large grains (40 g 100 grains-1), soft endosperm (IF&gt; 60), pink-purple color, and phenol and anthocyanin contents similar to those reported for the 'EO' race. The presence or absence of the pedicel did not affect flowered grain quality. Controlled pollination favored anthocyanin synthesis. The anthocyanin content of NCHs was determined by the female line. Thermal processing reduced anthocyanins by 60%; however, they leached into the flowering broth, so that the pozole made from NCHs improves the nutraceutical value of the pozole, relative to that of pozole made with Cacahuacintle maize.

The conducted investigation encompassed the comprehensive integration of mechanical, envi-ronmental, chemical, and microstructural evaluations of a composite amalgamating sandy soil and a synthetic polymer at two distinct concentrations (2.5% and %) across multiple curing in-tervals (0, 1, 2, 4, 7, 15, 30, and 45 days). The studied soil originates from an environmentally sig-nificant protected area in Brazil. The implementation of mechanisms for soil improvement in the region must adhere to technical criteria without causing environmental harm. Direct shear testing was conducted, permeability was assessed, and microstructure analysis and XRD and XRF/EDX studies of both the soil and composites were conducted. It was observed that longer curing times yielded improved results in shear stress, friction angle, and cohesive intercept, with SP_5% exhibiting the highest values compared to the soil and SP_2.5%. Adding the polymeric so-lution to the soil contributed to cementation and cohesion gains in the substrate. Through mi-crostructural characterization, the polymer's role as a cementing agent for the grains is evident, forming a film on the grains and binding them together. Based on the analyses and studies con-ducted in the research, it can be concluded that there is technical feasibility for applying the pol-ymeric solution at both dosages in geotechnical projects.

During 2010, at the Facultad de Medicina Veterinaria y Zootecnia of the Universidad Nacional Autónoma de México (fmvz-unam) we analyzed the influence of metadata over its website according to the search engines used by the academic community. This document serves only the second specific objective of the research: to know the academic profile, the informative behavior and the veterinary information needs of the academic community of the fmvz-unam. The methodological tool was the design and implementation of an online survey. We received 215 responses, two thirds answered academic staff, the rest, undergraduate and postgraduate students. In relation to information behavior, an Internet-usage index was developed, with which it was determined that 64 % of this community uses four or five information services on the Internet, This means that the network is widely used to seek information and as communication media. This community search for more veterinary information related to dogs, dairy cattle and sheep, compared to other animal species; while animal welfare, zoonosis and molecular biology are the topics of greatest interest.

Water quality assessment stands as a fundamental step in water resource management. In addition to substances and organisms present in the water, land use and land cover are two factors affecting also water quality. This study analyzed the correlation and influence between water quality and land use and land cover in the Miranda River Basin (MRB) and the natural wetlands in the Pantanal Biome. Using a watershed-wide approach, results suggested that water quality management policies can be considered in terms of sub-basins (smaller planning units). The Water Quality Index (WQI) was considered GOOD or EXCELLENT throughout the MRB. It was observed that the natural wetlands have the capacity to contribute to improve WQI, with reductions in thermotolerant coliforms and turbidity; however, high values were found for thermotolerant coliforms, a temporal increasing trend of biochemical oxygen demand (BOD), and a reduction in dissolved oxygen and total phosphorus. Conversely, it was found in these flooded areas a trend of decrease in dissolved oxygen and an increase in BOD concentrations. Natural wetlands play important hydrological and ecological roles in water quality, storing, removing, and cycling nutrients. They are highly relevant areas for defining watershed management and conservation strategies, environmental protection, and providing ecosystem services.

Nitrogen fertilization can provide greater nutritional support and mitigate salt stress in the millet crop. The aim of this study was to evaluate the physiological responses and agronomic performance of millet crops subjected to nitrogen fertilization and irrigation water salinity. The study was carried out in a greenhouse, using a completely randomized design in a 5 x 2 factorial scheme, with 4 rep-lications, with five doses of nitrogen (40; 60; 80; 100 and 120 kg ha-1 of N) and two levels of elec-trical conductivity of the irrigation water: 0.3 and 4.0 dS m-1. We concluded that salt stress in-creased leaf sodium levels and had a negative impact on stalk dry mass and panicle dry, leaf gas exchange, mineral element concentrations (K, P and Ca), and water use efficiency. The use of lower salinity water associated with increased nitrogen fertilization provides greater stalk dry mass and panicle dry, photosynthesis, water use efficiency, chlorophyll index, leaf potassium concentration, and biomass production. Salt stress negatively affected transpiration, stomatal conductance, leaf P and Ca levels, and increased leaf sodium levels as nitrogen fertilization increased in millet plants grown under pot conditions. These results can be used to create a strategy to reduce the negative impact of salt stress associated with the nutrition of millet plants, using nitrogen fertilization.

In this paper we establish information theoretical bridges between 1) Thermal Heisenberg uncertainties $\Delta x \Delta p$ (at temperature $T$), and 2) LMC structural quantifiers. After having achieved such purpose, we determine to what an extent our bridges can be extended to both the semi classical and classical realms. Also, we find a strict bound relating a special LMC structural quantifier to quantum uncertainties.

In this review we summarize existing trends of flow control used to improve the aerodynamic efficiency of wings. We first discuss active methods to control turbulence, starting with flat-plate geometries and building towards the more complicated flow around wings. Then, we discuss active approaches to control separation, a crucial aspect towards achieving high aerodynamic efficiency. Furthermore, we highlight methods relying on turbulence simulation, and discuss various levels of modelling. Finally, we thoroughly revise data-driven methods, their application to flow control, and focus on deep reinforcement learning (DRL). We conclude that this methodology has the potential to discover novel control strategies in complex turbulent flows of aerodynamic relevance.

A large share of the reinforced concrete (RC) building stock in Mediterranean countries faces a dual challenge of seismic vulnerability and energy inefficiency, calling for urgent renovation efforts. While energy upgrades have been the focus of previous renovation policies, recent research highlights the critical need for integrated retrofitting solutions that address both structural integrity and energy performance. Multi-criteria decision-making (MCDM) approaches are a promising tool for optimizing the combined choice of these integrated interventions, considering various decision variables (DVs) of economic, social, environmental, and technical nature. To understand the impact of climate and seismic hazard conditions on multi-criteria-based retrofitting assessment, a case-study RC school building is selected and assumed to be located in three distinct climate conditions, cold, mild, and warm, and three seismic hazard levels, low, medium and high. Moreover, given the complexity and challenges of quantifying seismic performance metrics for practitioners, an available simplified (practice-oriented) approach is compared herein with a more thorough research-based one for quantifying the seismic performance of RC buildings within the MCDM framework. Both approaches are applied to the case-study building, considering twelve possible combinations of energy and seismic interventions. The accuracy of the practice-oriented approach and its impact on the retrofitting rankings is evaluated, emphasizing the importance of accessible and efficient evaluation methods in facilitating informed decision-making for building renovation

Notwithstanding the advances achieved in the last decades in the field of synthetic bone substitutes, the development of biodegradable 3D scaffolds with ideal mechanical and biological properties remains an unattained challenge. In this work, a novel approach is explored to produce synthetic bone grafts mimicking the complex bone structure using additive manufacturing. For the first time, scaffolds were produced, using an extrusion technique, composed of a thermoplastic polymer, polycaprolactone (PCL), hydroxyapatite nanoparticles (HANp), and polyethylene glycol diacrylate (PEGDA). These scaffolds were further compared with two groups of scaffolds: one composed of PCL and another of PCL and HANp. After production, optimisation and characterisation of these scaffolds, an in vitro evaluation was performed using human dental pulp stem/stromal cells (hDPSCs). Through the findings it was possible to conclude that PEGDA scaffolds were successfully produced presenting networks of interconnected channels, presenting hydrophilic properties (15.15 4.06°), adequate mechanical performance (10.41MPa 0.934), and allowing a cell viability significantly superior to the other groups analysed. To conclude, findings in this study demonstrated that PCL, HANp and PEGDA scaffolds may have promising effects on bone regeneration and might open new insights for 3D tissue substitutes.

The incidence of gastrointestinal diseases (cancer in particular) has increased progressively with considerable morbidity, mortality, and a high economic impact on the healthcare system. Dietary intake of natural bioactive phytochemicals showed to have cancer-preventing and therapeutic effects. This includes the cruciferous vegetable derivative phenethyl isothiocyanate (PEITC), a bioactive compound from watercress. PEITC antioxidant, anti-inflammatory and anti-cancer properties are of particular importance. This review summarizes the current knowledge on the role of PEITC as a potential natural nutraceutical or an adjuvant against oxidative/inflammatory-related disorders in the gastrointestinal tract. We also discuss the safe and recommended dose of PEITC. Besides, we establish a framework to guide the research and development of sustainable methodologies for obtaining and stabilizing this natural nutraceutical for industrial use. This is a topic that still needs more scientific development, but with the potential to lead to a viable strategy in the prevention of cancer and other associated diseases of the gastrointestinal tract.

The objective of this study was to evaluate the drying kinetics of the mass of jambu leaves and mass of jambu leaves in foam mat at different temperatures (50, 60 and 70 °C and thickness of 1.0 cm). The physicochemical characterization of the materials was performed before and after drying. Twelve different drying models were fitted to the drying kinetics data and the thermodynamic properties were calculated. The physicochemical parameters for the mass of leaves and foam after drying were moisture content from 2 to 7%, ash from 13 to 17%, protein content from 22 to 30%, lipids from 0.6 to 4% and total titratable acidity from 0.20 to 0.28% of tartaric acid. Wang & Singh and Midilli models were recommended for describing the drying kinetics. The use of foam mat promoted higher values of effective diffusion coefficient and activation energy and lower values of enthalpy and entropy, thus enhancing the reduction of drying time.

Articular cartilage healing and repair is one of the biggest clinical challenges in trauma and orthopaedic medicine, leading to high economic loss due to athletic impairment in sport horses. Multipotent Mesenchymal stem/stromal cells are part of novel therapeutic arsenal aimed at tissue regeneration and restoring organ function. These cells release biomolecules and factors in the culture media, producing the so called conditioned medium, which have a pro-regenerative effect through paracrine mechanisms. Considering this, a therapeutic product combining equine synovial membrane derived Mesenchymal stem/stromal cells and equine umbilical cord stroma-derived Mesenchymal stem/stromal cells conditioned medium was employed. In this work the treatment of two articular defects, in the first phalanx and third metacarpus of the left front limb of a five-year-old horse, is described. Following surgical debridement of the lesions, the treatment comprised two intra-articular administrations of the above-mentioned therapeutic combination, 15 days apart. This was followed by a thorough rehabilitation program. A second-round treatment was performed 6 months later. Diagnostic imaging demonstrated significant improvement of the articular defects. The clinical outcome allowed a full return to the athletic performance demonstrating the safety and potential advantages of this approach when compared with other therapeutic options.

Schistosomiasis, a disease historically associated with poverty, lack of sanitation and social inequalities, is a chronic, debilitating parasitic infection, affecting hundreds of millions of people in endemic countries. Although schistosomiasis control approach has shown that chemotherapy is capable of reducing morbidity in humans, rapid re-infection is a reminder that the impact of drug treatment on transmission control or elimination initiatives is marginal. In addition, and regardless of more than two decades of well-executed control activities based on large-scale chemotherapy, the disease is expanding in many areas including Brazil. The development of the Sm14/GLA-SE schistosomiasis vaccine is an emblematic open knowledge innovation that has successfully completed Phase I and Phase IIa clinical trials, with Phase II/III trials underway in the African continent and to be followed in Brazil. Discovery and experimental phases were long term achievements leading to a robust collection of data that are strongly supporting the presently ongoing Clinical Phase. This paper reviews the development of the Sm14 vaccine formulated with GLA-SE (Glucopyranosyl Lipid A), from the earlier experimental developments to clinical trials including the recent status of Phase II studies.

Keywords: Oral health, diabetes, periodontal disease, caries, periodontitis.

The Standard Model is not a complete description of reality; it omits the existence of dark matter, dark energy, and an explanation as to why no CP violation has been observed. However, some of these phenomena could be explained through a new force mediated by a new boson. If such a boson were massless it would result in a power law potential and if massive the interaction would be Yukawa-like. A previous experiment employing a micro-mechanical oscillator and a spherical test mass interactions was successful in placing the best limits on a mass-mass Yukawa-like interaction, but the data was never analyzed in the context of a power law. Here that data is analyzed considering a power law for powers n = 1-5 where n is the number of boson exchanges. The results show that the limits obtained through power law analysis of this data are not better than the currently accepted limits. A discussion of an experiment design capable of producing better limits on power law extensions to the Standard Model is presented, and suggests micro mechanical oscillators based experiment remains capable of improving the limits by at least one order of magnitude.

Recently, we demonstrated the validity of anomalous numbers law, known as Newcomb-Benford´s law, at the mammalian neuromuscular transmission, considering different extracellular calcium concentrations . The present work continues to examine how alterations in extracellular solution modulate the first digit law in the context of the spontaneous release of acetylcholine from the neuromuscular junction. We investigated if the intervals of miniature potentials collected at the neuromuscular junction obey the law in a hyperkalemic environment. The analysis showed that the interval between the miniature potentials at high potassium concentrations follows Newcomb-Benford´s law. Also, our data allowed us to uncover a conformity fluctuation as a function of the number of intervals of the miniature potentials. Finally, we discuss the biophysical implications of the present findings.

Circular RNAs (circRNAs) are single-stranded RNA molecules often circularized by backsplicing. Growing evidence implicates circRNAs in the underlying mechanisms of various diseases, such as Alzheimer's and Parkinson's disease (PD) - the first and second most prevalent neurodegenerative disorders. Several circRNAs are associated with brain damage, including circSNCA, circHIPK2, circHIPK3, and circSLC8A1. Gain-of-function and loss-of-function studies on circRNAs have shed light on their roles in the pathobiology of various diseases. Gain-of-function approaches typically employ viral or non-viral vectors that hyperexpress RNA sequences capable of circularizing to form the specific circRNA under investigation. In contrast, loss-of-function studies utilize CRISPR/Cas systems, antisense oligonucleotides (ASOs), or RNAi techniques to knockdown the target circRNA. Given that aberrantly expressed circRNAs have been associated with brain pathologies, a critical question arises: could circRNAs serve as viable targets for neuroprotective treatments? Translating any oligonucleotide-based therapy, including those targeting circRNAs, involves developing adequate brain delivery systems, minimizing off-target effects, and addressing the high costs of treatment. Nonetheless, RNAi-based FDA-approved drugs have entered the market, and circRNAs have attracted significant attention and investment from major pharmaceutical companies. Spanning from bench to bedside, circRNAs present a vast opportunity in biotechnology for oligonucleotide-based therapies designed to slow or even halt the progression of neurodegenerative diseases.

A description is provided of a method -- the Set Equality Method (SEM) -- to determine the validity, or lack of validity, of each categorical syllogism. A justification is given for the presentation of a new method to solve a problem which has already been solved using different approaches. First, the SEM assigns an equality of certain sets (or two of those equalities in specific cases as will be indicated) to each of the categorical propositions composing each syllogism considered -- that is, to each of the two premises and to the conclusion. Each syllogism considered is valid if and only if a) it is possible to select one of those equalities corresponding to one of the premises such that one of its members is a certain set and the other of those equalities corresponding to the other premise such that one of its members is a subset of the set mentioned, and b) it is possible to deduce an equality corresponding to the conclusion of the two equalities corresponding to the premises. In some cases, as will be specified, it is possible to provide a second test for the validity of a syllogism whose validity was already proven, thus providing information about the logical form of categorical syllogisms.