The aim of this study was to assess the ability of multiscale sample entropy (MSE), refined composite multiscale entropy (RCMSE), and complexity index (CI) to characterize gait complexity through trunk acceleration patterns in subjects with Parkinson's disease (swPD) and healthy subjects, regardless of age or gait speed. The trunk acceleration patterns of 51 swPD and 50 HS were acquired using a lumbar-mounted magneto-inertial measurement unit during their walking. MSE, RCMSE, and CI were calculated on 2000 data points, using scale factors (τ) 1-6. Differences between swPD and HS were calculated at each τ, and the area under the receiver operating characteristics, optimal cutoff points, post-test probabilities, and diagnostic odds ratios were calculated. MSE in the antero-posterior direction at τ 4 and τ 5, and MSE in the ML direction at τ 4 outperformed the other entropy measures in terms of discriminative ability and characterized the gait of swPD with 79%, 82%, and 78% probabilities, respectively, and correlated with the motor disability, pelvic kinematics, and stance phase. Using a time series of 2000 data points, a scale factor of 4 or 5 in the MSE procedure can be considered as a marker of gait variability and complexity in swPD.

The Canal of Aragon and Catalonia (CAC) is 134 km long and irrigates 105,000 ha (131 irrigation user communities) and it is own by the River Ebro’s Water Agency. The aqueducts are located between km 67 and 71 of the canal and were designed by the Civil Engineer Félix de los Ríos Martín in 1907. The cross-section of both aqueducts, Coll de Foix and Capedevila, was extended within the framework of the project by Fernando Hué Herrero in 1962 in order to reach design flows of 26.1 m3/s and 25.7 m3/s, respectively. The structural performance of the aqueducts has been satisfactory, nevertheless the hydraulic capacity has reduced over the years. As a result, the irrigation user communities have expressed the need to extend the cross-section of the aqueducts to meet the irrigation demands. Given the age of the structure and the different design considerations at the time, it is paramount to verify the structural reliability of the aqueducts in the new load configuration. Therefore, the objective of the paper is to present the structural safety analysis conducted and describe the new extended cross-section for both aqueducts (maintaining the original structural typology).

After the ban on tributyltin-based antifouling paints, DCOIT (4,5-Dichloro-2-octylisothiazol-3(2H)-one) became one of the most used antifouling biocides. DCOIT is a pseudo-persistent contaminant in port areas and is toxic to non-target species, but its ability to bioaccumulate and be transferred along the trophic chain remains unknown. This study aimed to preliminarily investigate the bioaccumulation, trophic transfer, and biomagnification of DCOIT and SiNC-DCOIT (DCOIT immobilized in silica mesoporous nanocapsules) from the microalga Tetraselmis chuii to the mussel Mytilus galloprovincialis during exposure experiments considering 24 h of uptake followed by 72 h depuration. Mussels rapidly internalized and metabolized both DCOIT and SiNC-DCOIT. The predator-prey biomagnification factors (BMFTL) suggested that both forms of the biocide can be trophically transferred, with higher concentrations of DCOIT and SiNC-DCOIT in mussels than in microalgae (BMFTL > 1). However, the bioaccumulation and bioconcentration factors indicated a low bioaccumulation capability in the short term, suggesting that the depuration rate overcomes the uptake. Our findings contribute to the development of environmental risk assessments for DCOIT and SiNC-DCOIT, but do not exclude the possibility of DCOIT bioaccumulation in the long-term in areas with constant input of DCOIT. Further studies are needed to understand these processes under continuous exposure scenarios to DCOIT.

The relationship between religion and politics is a constant in the history of humanity. In the specific case of Western culture, it is possible to trace an archeology of the political as an effect of theological-political devices (essentially Christian-inspired). If we add to this the evolution of politics, in modern times, towards biopolitics, then the relationship focuses on very concrete topics. This is the case of the immunological process – from a personal, social, and philosophical perspective – thoroughly analyzed by Italian philosopher Roberto Esposito. In the context of his philosophical immunology, the place of religion is mainly archaeological and is interpreted critically. This article also aims to critically analyze his position, proposing a reading close to his thought but which is, at the same time, somewhat different.

“De-[Constructing] Growth” is offered as a deeper and more useful conceptualization that avoids the negative connotations of, and resistance to, “degrowth” by decoupling profit from unsustainable consumption, production, and inequality.

Dual-energy CT (DECT) imaging has broadened the potential of CT imaging by offering multiple postprocessing datasets with a single acquisition at more than one energy level. DECT shows profound capabilities to improve diagnosis based on its superior material differentiation and its quantitative value. However, the potential of dual energy imaging remains relatively untapped, possibly due to its intricate workflow and intrinsic technical limitations of DECT. Knowing the clinical advantages of dual-energy imaging and recognizing its limitations and pitfalls is neces-sary for an appropriate clinical use. The aims of this paper are to review physical and technical basis of DECT acquisition and analysis, to discuss advantages and limitations of DECT in dif-ferent clinical scenarios, to review technical constraints in material labeling and quantification, and to evaluate cutting-edge applications of DECT imaging, including artificial intelligence, qualitative and quantitative imaging biomarkers, and DECT-derived radiomics and radioge-nomics

Numerous studies on evaporative cooling systems have been conducted globally, but there is a scarcity of investigations in eastern Africa. The few studies undertaken in this region have primarily focused on their application in food storage and preservation, rather than for building purpose. The goal of this study is to review the most recent advancements in evaporative cooling technology, which would be relevant in eastern Ethiopia and could provide adequate cooling, give adequate thermal comfort, use less energy, and minimize environmental effect in hot and dry areas. There aren't many studies on evaporative cooling systems for building applications in Eastern Africa as a whole, thus this review has taken into account studies conducted in regions with climates similar to eastern Ethiopia. This study covers the classification, operation, and performance of evaporative cooling systems in hot and dry climate. Evaporative cooling systems work well in hot and dry climates, as revealed by this review study.

This paper, based on the "Unified Theory of Forces," rigorously proves the formula of de Broglie's wave function. This helps us better understand the following important issues: 1) Theoretically prove and understand the essence of de Broglie's wave function; 2) Prove that when the particle's momentum P is determined, the greater the mass of the particle, the more concentrated its wave function distribution, and the weaker the interference effect; 3) Correct the spatial distribution of the wave function of free particles, proving that the wave function of free particles is strictly constrained within a finite spatial range, which is consistent with the facts we observe.

In manufacturing chatter is an unwanted phenomenon that can lead to product quality reduction and tool wear. Real time chatter detection is key to preventing these issues and improving overall machining efficiency. In this paper we propose an unsupervised chatter detection method using autoencoders (AE) and Density-Based Spatial Clustering of Applications with Noise (DBSCAN) clustering algorithm that uses internal signals of Computer Numerical Control (CNC) machines. The proposed method starts by using an AE to extract features from raw internal signals collected from CNC machines. This step reduces the dimensionality of the data and captures the underlying patterns of chatter. Then the extracted features are fed into DBSCAN clustering algorithm which is a density based algorithm that groups similar data points and identifies outliers. We tested the proposed method with real world data collected from various CNC machines. The results show that our unsupervised chatter detection method has high accuracy, precision and recall, can detect chatter and distinguish it from normal machining. Also the method is robust to noise and can adapt to dynamic machining conditions. In summary our work presents an unsupervised chatter detection method using AE and DBSCAN clustering that uses internal signals of CNC machines. This method is a reliable and efficient solution for real time chatter detection so manufacturers can improve product quality, optimize machining process and reduce tool wear during machining.

De novo metastatic hormone-sensitive PC (mHSPC) accounts for 5-10% of all prostate cancer (PC) diagnoses but it is responsible for nearly 50% of PC-related deaths. Since 2015, the prognosis of mHSPC has slightly improved thanks to the introduction of new hormonal agents and chemotherapy combined with androgen deprivation therapy from the first-line setting. This review describes the current therapeutic opportunities in de novo mHSPC, focusing on potential molecular biomarkers identified in the main clinical trials that have changed the standard of care, the genomic features of de novo mHSPC, and the principal ongoing trials that are investigating new therapeutic approaches and the efficacy of a biomarker-guided treatment in this setting. The road towards a personalized treatment for de novo mHSPC is still long considering that the randomized clinical trials, which have furnished the basis of the current therapeutic options, stratified patients according to clinical criteria that not necessarily reflect the biological rationale of the chosen therapy. The role of transcriptomic profiling of mHSPC as predictive biomarker requires further validation, as well as it remains to ascertain how the genomic alterations detected in mHSPC, that are considered predictive in the castration-resistant disease, can be exploited in the mHSPC setting.

The treatment of critically ill patients remains an evolving and controversial issue. Mechanical circulatory support through a percutaneous approach for the management of cardiogenic shock has taken place in recent years. The combined use of IABP and Impella 2.5 device may have a role to play for this group of patients. A simulation approach may help with a quantitative as-sessment of the achievable degree of assistance. In this paper, we analyse the interaction be-tween Impella 2.5 pump applied as LVAD and IABP using the numerical simulator of the cardi-ovascular system developed in our laboratory. Starting with pathological conditions reproduced using literature data, the simulations were performed setting different rotational speeds for the LVAD and driving the IABP in full mode (1:1) or partial mode (1:2, 1:3 and 1:4). The effects in-duced by drug administration during the assistance were simulated too. The haemodynamic pa-rameters under investigation were: mean aortic pressure, systolic and diastolic aortic pressure, mean pulmonary arterial pressure, mean left and right atrial pressure, cardiac output, cardiac index, left and right ventricular end-systolic volume, left ventricular end-diastolic volume and mean coronary blood flow. The energetic variables considered in the study were: left and right ventricular external work and left and right atrial pressure-volume area. The outcome of our simulations shows that the combined use of IABP and Impella 2.5 achieves adequate support in the acute phase of cardiogenic shock compared to each standalone device. This would allow fur-ther stabilisation and transfer to a transplant centre should escalation of treatment be required.

Objective: To evaluate the direct costs of treating patients with neuromyelitis optica spectrum disorders (NMOSD) in outpatient care, from a hospital and Unified Health System (SUS) perspective. Methods: Observational study with data collection by microfunding, carried out with patients diagnosed with neuromyelitis optics, treated at a university hospital, in the city of Rio de Janeiro. Mann-Whitney tests were performed to measure cost differences between patient groups by disease severity and analysis perspective. Results: Nine individuals with a median age of 48 years (IQR 30 - 59 years) were included. The median total costs for patients with greater severity from the perspective of the SUS and the hospital were R$ 21,638.22 (IIQ: R$ 15,614.63; R$ 25,985.32) and R$ 32,094.11 (IIQ: R$ 25,610 .60; R$ 38,617.25) respectively. For patients with moderate severity the median was R$ 7,339.85 (IIQ: R$ 6,235.45; R$ 11,912.05) from the SUS perspective and R$ 11,505.80 (IIQ: R$ 7,339.85; R$ 22,424.76) from the perspective of the hospital, where the use of medications had a major impact. Conclusion: The main cost drivers were medicines, especially those used off-label, and procedures.

COVID-19 was a terrible worldwide pandemic that caused a global public health crisis, with numerous deaths and a severe economic depression. To suppress the spread of COVID-19 and initiate patient isolation and contact tracing to reduce its effect, early diagnosis was required, with real-time reverse transcriptase polymerase chain reaction (RT-PCR) swab test being the most widely used. However, the RT-PCR test was sometimes found to be lengthy and inaccurate and; for that reason, in many cases of severe complications of COVID-19 pneumonia, chest screening with radiography imaging was preferred. In this paper, we carried out a study for COVID-19 detection from computed tomography images, and compared the obtained results using deep learning (DL) and support vector machine (SVM). The findings showed that, despite the excellent results shown by deep learning, the accuracy in predicting COVID-19 using SVM, in the presence of small databases, was slightly higher than DL. The execution time using SVM was also shorter

Overweight/obesity is one of the most important health problem worldwide. Birth by cesarean section has been shown to influence long-term health outcome including obesity. The aim of this systematic review-meta-analysis is to examine whether cesarean section increases the risk of offspring’ s overweight/obesity. The study follows the PRISMA and MOOSE guidelines. A systematic literature search was con-ducted on Scopus, PubMed, and WoS until December 2020. For inclusion, studies must have re-ported either (I) both Birth by cesarean section and adult (≥ 18 years) offspring BMI, (II) cohort or case–control study design and (III) a risk estimate. Heterogeneity testing was performed using Cochran's Q and I2 statistics. Publication bias was assessed by Egger’s test and Begg’s test. Me-ta-analysis was performed through a random effect model. Eleven studies with a combined population of 180.408 subjects were included in the meta-analysis. The overall analysis (n = 18) yielded a combined risk estimate for overweight/obesity of 1.19 (95% CI 1.08-1.31) and the test of heterogeneity resulted Q=53,37 (I2 = 70,37 %, P≤0•0001). The risk of offspring obesity is 1.23 (95% CI 1.09-1.39) and the test of heterogeneity resulted Q=39.50 (I2= 72,15%, P≤0•0001). Children born by cesarean section have an increased risk of developing obesity in adulthood

This paper report presents the interdisciplinary science showcased at the Young Scientists Retreat 2019. The retreat was jointly organized by young researchers from Instituto Gulbenkian de Ciência (Portugal) and Institut Curie (France) and took place in Pedrógão Pequeno, a small village in the central region of Portugal in September 2019. Three keynote speakers were invited to present their work, Alfonso Martinez-Arias, Biola Javierre Martínez, and Sara Magalhães. In addition, accepted talks and posters from young researchers were presented at the retreat. Talks were organized in sessions, which included: epigenetics and evolution, immunology, cell biology and metabolism, biostatistics and public health, biophysics, proliferation and morphogenesis, and cell polarity. A post-retreat survey, complied both by IGC attendees as well as a sample of non-attendees, discovered the existence of barriers that prevented the full participation of some junior scientists, especially female postdocs and postdocs with families. We discuss ways in which future retreats could help address this and additional issues common to young researchers in general.

The primary motivation for this work is to develop the concept of Marshall's quotient (\cite{ribeiro2016functorial}) applicable to non-commutative multirings endowed with involution, expanding the main ideas of the classical (= commutative, without involution) case presented in Marshall's seminal paper \cite{marshall2006real}. We define two multiplicative properties to deal with the involutive case and characterize their Marshall quotient. Besides, this article presents various cases showing that the ''multi'' version of rings with involution offers many examples, applications, and relatives in (multi) algebraic structures.

Cities are complex systems requiring urban design models that balance order and disorder. Collective creativity initiatives engage citizens in these processes, empowering bottom-up approaches that prioritize people and social well-being within urban development. This paper investigates an 'Urban Laboratory' as a case study, examining the potential of collective creativity to address urban complexity. The successful and ongoing project 'El Campo de Cebada' in Madrid, Spain, demonstrates how a community transformed a vacant lot into a vibrant social hub. The phases of this study include case selection, data collection, data analysis, and presentation of the results. This study identifies key enabling factors, including agents, management, social dynamics, infrastructure, and actions. These insights offer a methodological framework for designing future collaborative, resilient, and inclusive urban spaces, addressing the complex needs of communities within our cities.

A study of cryogenic drilling in sandwich composites has been carried out. Materials used have been carbon fiber reinforced polymer sandwich sheets with inner foamed polyvinyl chloride core, composites with aerospace, marine, construction and automotive applications, including protec-tion structure of Polar engineering equipment. Experimental tests have been performed in lam-inates with 12 mm and 6 mm of thickness, drilling with liquid nitrogen as refrigerant to reach temperatures below -120ºC under different cutting conditions, in particular, drill rotation speeds between 2000 rpm and 6000 rpm and feed rates between 200 mm/min and 600 mm/min. Variables as thrust forces and circularity error have been measured, due to the importance of its effect on the hole quality, as an operation prior to a possible assembly. A design of experiments has been allowed determining relationships between variables, identifying the influence of cutting condi-tions on the thrust force and the circularity at inlet and outlet holes.

Climate change is increasing the occurrence of disastrous events in the world, but several disparities in population vulnerability are being registered. One of the causes of these variances is different public risk perception also due to the degree of education and knowledge of the population. In this study, some of the results obtained in a risk perception survey are presented. The survey was carried out in an area of Calabria (Southern Italy) hit by geo-hydrological events that have occurred in recent years with damage to roads, tourism facilities and private houses. A statistical interpretation of the results highlights the importance of education and knowledge to risk perception on the part of the population investigated.

Aortic disease has a significant impact on quality of life. Involvement of the aortic arch requires preservation of blood supply to the brain during surgery. Deep hypothermic circulatory arrest is an established technique for this purpose although neurological injury remains high. Additional techniques have been used to reduce the risk although controversy still remains. A three-way cannulation approach, including both carotid arteries and the femoral artery or the ascending aorta, has been used successfully for aortic arch replacement and redo procedures. We have de-veloped circuits of the circulation to simulate blood flow during this type of cannulation set up. The aim is to analyse using CARDIOSIM© cardiovascular simulation platform, how the haemodynamic and energetic parameters are affected and the benefit derived with particular reference to the cerebral circulation.

According to the International Union for Conservation of Nature Red List, the scalloped hammerhead (Sphyrna lewini) is a critically endangered species, primarily due to intense fishing and other anthropogenic effects such as pollution. Nowadays, plastic debris contamination is a subject of concern due to its extensive presence in the sea and the digestive tracts of many fish species. The possible effects of plastic debris as a vector of other pollutants are still unknown. We analyzed the digestive tract of hammerhead sharks to investigate the correlation between plastic and other anthropic debris contamination and feeding habits in the eastern region of the Gulf of California. A total of 58 specimens were analyzed from the coastal area, revealing a plastic occurrence frequency of 79.3%. Of these, 91.4% corresponded to fibers, and 8.6% to fragments. The composition of the polymers was primarily cellulose (64.4%). According to their diet, these organisms exhibit benthopelagic habits, feeding both in the water column and on the seabed. These results indicate a high level of contamination of anthropogenic cellulosic microfibers in the area. This changed according to the year, indicating that the anthropic debris ingestion is related to the discharges of human activities and their seasonality rather than to a selection process by the sharks. Although cellulosic microfibers are recognized as a biomaterial, they can harm marine species, posing an additional threat to this iconic shark.

The dysregulated release of cytokines has been identified as one of the key factors behind poorer outcomes in COVID-19. This ‘cytokine storm ‘produces an excessive inflammatory and immune response, especially in the lungs, leading to acute respiratory distress (ARDS), pulmonary edema and multi-organ failure. Alleviating this inflammatory state is crucial to improve prognosis. Pro-inflammatory factors play a central role in COVID-19 severity, especially in patients with comorbidities In these situations, an overactive, untreated immune response can be deadly, suggesting that mortality in COVID-19 cases is likely due to this virally driven hyperinflammation. Administering immunomodulators has not yielded conclusive improvements in other pathologies characterized by dysregulated inflammation such as sepsis, SARS-CoV-1 and MERS. The success of these drugs at reducing COVID-19-driven inflammation is still anecdotal and comes with serious risks. It is also imperative to screen the elderly for risk factors that predispose them to severe COVID-19. Immunosenescence and comorbidities should be taken into consideration. In this review, we summarize the latest data available about the role of the cytokine storm in COVID-19 disease severity as well as potential therapeutic approaches to ameliorate it. We also examine the role of inflammation in other diseases often comorbid with COVID-19, such as aging, sepsis, and pulmonary disorders. Finally, we identify gaps in our knowledge and suggest priorities for future research aimed at stratifying patients according to risk as well as personalizing therapies in the context of COVID19-driven hyperinflammation.

Cities require flexible and participatory planning methodologies to address complex and evolving urban challenges. In Italy, the legislative framework is defined at the Regional level, according to the National laws and jurisprudence. The Lombardy region introduced the Planning Document (PD) in the Territorial Government Plan (PGT), as a strategic tool capable of adapting to changes. Based on a strategic vision, this document is useful to guide concrete actions for urban transformation, actively involving stakeholders, including citizens. The PD has the role to translate the political program into an urban planning design. So, the role it has is both technical and political. The political dimension is usually deepened in the strategic component of the document. Following the formation process of the whole city plan, the authors define the key strategies in the PD for a healthier urban future for the city of Voghera. It emerges as a balanced urban development that combines economic growth, environmental preservation, and community well-being. In the paper the authors synthesize the Voghera’s PD as an example of strategic planning that interacts with the practical planning actions and that guides both the public and the private decisions about the city development towards a healthier city.

The use of haptic devices in rehabilitation of impaired limbs has become rather popular, given the proven effectiveness in promoting recovery. In a standard framework, such devices are used in rehabilitation centers, where patients interact with virtual tasks, presented on a screen. To track their sessions, kinematic/dynamic parameters or performance scores are recorded. However, as Internet access is now available at almost every home, and in order to reduce the hospitalization time of the patient, the idea of doing rehabilitation at home is gaining wide consent. Medical care programs can be synchronized with the home rehabilitation device; patient data can be sent to the central server that could redirect to the therapist laptop (tele-healthcare). The controversial issue is that the recorded data do not actually represent the clinical conditions of the patients according to the medical assessment scales, forcing them to frequently undergo clinical tests at the hospital. To respond to this demand, we propose the use of a bilateral master/slave haptic system that could allow the clinician, who interacts with the master, to assess remotely and in real time the clinical conditions of the patient that uses the home rehabilitation device as the slave. In this paper, we describe a proof of concept to highlight the main issues of such an application, limited to one degree of freedom, and to the measure of the stiffness and range of motion of the hand.

An explanation of the origin of dark matter is suggested in this work. The argument is based on symmetry considerations about the concept of mass. In the Wigner's view, the rest mass and the spin of a free elementary particle in flat space-time are the two invariants that characterize the associated unitary irreducible representation of the Poincar\'e group. The Poincar\'e group has two and only two deformations with maximal symmetry. They describe respectively the de Sitter (dS) and Anti de Sitter (AdS) kinematic symmetries. Analogously to their shared flat space-time limit, two invariants, spin and energy scale for de Sitter and rest energy for Anti de Sitter, characterize the unitary irreducible representation associated with dS and AdS elementary systems. While the dS energy scale is a simple deformation of the Poincaré rest energy and so has a purely mass nature, AdS rest energy is the sum of a purely mass component and a kind of zero-point energy derived from the curvature. An analysis based on recent estimates on the chemical freeze-out temperature marking in Early Universe the phase transition quark-gluon plasma epoch to the hadron epoch supports the guess that dark matter energy might originate from an effective AdS curvature energy.

Cardiogenic shock (CS) is part of a clinical syndrome consisting of acute left ventricular failure causing severe hypotension leading to inadequate organ and tissue perfusion. The most com-monly used devices to support patients affected by CS are Intra-Aortic Balloon Pump (IABP), Impella 2.5 pump and Extracorporeal Membrane Oxygenation. The aim of this study is the com-parison between Impella and IABP using CARDIOSIM© software simulator of the cardiovascular system. The results of the simulations included baseline conditions from a virtual patient in CS followed by IABP assistance in synchronized mode with different driving and vacuum pressures. Subsequently, the same baseline conditions were supported by the Impella 2.5 with different ro-tational speeds. The percentage variation with respect to baseline conditions was calculated for hemodynamic and energetic variables during IABP and Impella assistance. Impella pump driven with a rotational speed of 50000 rpm increased the total flow by 4.36% with a reduction in left ventricular end diastolic volume (LVEDV) by ≅15% to ≅30%. A reduction in left ventricular end systolic volume (LVESV) by ≅10% to ≅18% (≅12% to ≅33%) was observed with IABP (Impella) as-sistance. Taking into account the limitations of a simulation setting, this study highlights that assistance with the Impella device leads to higher reduction in LVESV, LVEDV, left ventricular external work and left atrial pressure-volume loop area compared to IABP support.

The vomeronasal system serves as a pivotal element in mammalian sensory biology, allowing the perception of chemical signals essential for social communication via the activation of two main receptor families, V1R and V2R. The expression of V1Rs and V2Rs is linked with that of the G-protein alpha-subunits, Gαi2 and Gαo, respectively. The exploration of the evolutionary pathways of V1Rs and V2Rs across all mammalian species remains a main challenge, juxtaposing available genomic data against emerging immunohistochemical evidence. However, recent investigations, in contrast to what is predicted by the currently annotated genomic sequences, have revealed the expression of Gαo in the vomeronasal neuroepithelium of wild canids, including wolves and foxes. In the present study, the employment of a specific antibody raised against the mouse V2R2, member of the C-family of vomeronasal receptors, V2Rs, has confirmed the expression of this receptor in the fox and wolf, but it has revealed the lack of expression in the dog. This may reflect the impact of domestication on the regression of the VNS in this species, in contrast to their wild counterparts, and underscores the effects of artificial selection on sensory functions. Thus, these findings suggest a more refined chemical detection capability in wild species.

Sleep timing is one of the dimensions of sleep that refers to the time of day when sleep occurs. It was included in sleep-related research because of the potential associations between overweight and consumption of meals and snacks. This cross-sectional study aimed to investigate associations between sleep timing, meal and snack consumption, and weight status in 1333 schoolchildren aged 7-14 years. The midpoint of sleep was used as a sleep timing measure obtained by the midpoint between bedtime and wake-up time and classify as Early, intermediate, and Late. Schoolchildren in the Early group were less likely to be overweight (OR: 0.83, 95% CI 0.69; 0.99), had higher odds of mid-morning snack consumption (OR: 1.95, 95%CI 1.56; 2.44) and lower probability to consume the evening snack (OR: 0.75, 95%CI 0.59; 0.94) compared with the Intermediate group. The Late group had lower odds of mid-morning snack consumption (OR: 0.67, 95%CI 0.55, 0.80) than the Intermediate group. The consumption of mid-morning and evening snacks was associated with the Early and the Late midpoint of sleep. These results suggest that bedtime and wake-up time are relevant to consuming meals and snacks and may also be related to a greater probability of being overweight in children and adolescents.

This study refers to the optimization of a Selective Solar Absorber to improve the Sun-to-thermal conversion efficiency at mid temperatures in high vacuum flat thermal collectors. Efficiency has been evaluated by using analytical formula and a numerical thermal model. Both results have been experimentally validated using a commercial absorber in a custom experimental set-up. The optimization procedure aimed at obtaining Selective Solar Absorber is presented and discussed in the case of a metal dielectric multilayer based on Cr2O3 and Ti. The importance of adopting a real spectral emissivity curve to estimate high thermal efficiency at high temperatures in selective solar absorber is outlined. Optimized absorber multilayers can be 8% more efficient than the commercial alternative at 250 °C operating temperatures and up to 27% more efficient at 300 °C. Once the multilayer has been optimized the choice of a very low emissivity substrate such as copper allows to further improve efficiency and to reach stagnation temperature higher than 400 °C without Sun concentration.

Nuclear fusion reactors are composed by several complex components whose behaviour may be not certain a priori. This uncertainty may have a significant importance in the evolution of fault transients in the machine, causing unexpected damages to its components. For this reason a suitable method for the uncertainty propagation during those transient is required. The Monte Carlo method would be the reference option, but it is, in most of the cases, not applicable due to the large amount of required simulations to be repeated. In this context the Polynomial Chaos Expansion has been considered as a valuable alternative. It allows to create a surrogate model of the original one in terms of orthogonal polynomials. Then, the uncertainty quantification is performed repeatedly calling this much simpler and faster model. Using the fast current discharge in the Divertor Tokamak Test Toroidal Field (DTT TF) coils as a reference scenario, this method has been applied: the uncertainty on the parameters of the Fast Discharge Unit (FDU) varistor disks is propagated to the simulated electrical and electro-magnetic relevant effects. Eventually two worst case scenarios have been analyzed from the thermal-hydraulic point of view with the 4C code, simulating a fast current discharge as a consequence of a coil quench. Eventually it has been demonstrated that the uncertainty on the inputs (varistor parameters) strongly propagates obtaining a wide range of possible scenarios in case of accidental transients. This result underlines the necessity to take into account and propagate all possible uncertainties in the design of a fusion reactor, according to the Best Estimate Plus Uncertainty approach.

Master Valentim’s fountain became an important historical patrimony for Brazil, being portrayed by famous artists among them Jean-Baptiste Debret. In 1938, it was registered as cultural heritage by the Brazilian National Historical and Artistic Heritage Institute (IPHAN), and in 1990 it was subjected to excavation and restoration works. The fountain was built in Gneiss and Lioz limestone, with metallic plates and mortar connecting the Gneiss blocks. Currently, deteriorations in the fountain stones can be observed such as light stains and some aesthetic modifications caused by inadequate restorations. Petrography, XRF, XRD, Physical Properties, Colorimetry, Electrical Conductivity, ICP-OES, SEM-EDX, and TGA were performed in order to characterize the Gneiss blocks, the metallic plates, the stones used in previous restorations, as well as light stains observed on the Gneiss blocks. The petrography and XRD analyses inferred that light stains may have been caused by the formation of an insoluble salt as a result of the association of the lead from the plates with other elements. The XRD analysis on the light staining area indicated presence of cerussite (PbCO₃), and anglesite (PbSO₄), which are the probable cause of the light stains. The SEM-EDX results suggested that sulfur is the main element associated to lead.

In humans, coronaviruses can cause infections of the respiratory system, with damage of varying severity depending on the virus examined: ranging from mild or moderate upper respiratory tract diseases, such as the common cold, to pneumonia, severe acute respiratory syndrome, kidney failure and even death. Human coronaviruses known to date, common throughout the world, are seven. The most common - and least harmful - ones were discovered in the 1960s and cause a common cold. Others, more dangerous, were identified in the early 2000s and cause more severe respiratory tract infections. Among these the SARS-CoV, isolated in 2003 and responsible for the Severe Acute Respiratory Syndrome (the so-called SARS), which appeared in China in November 2002, the Coronavirus 2012 (2012-nCoV) cause of the Middle Eastern Respiratory Syndrome from Coronavirus (MERS), which exploded in June 2012 in Saudi Arabia, and actually SARS-CoV-2. On December 31, 2019, a new Coronavirus strain was reported in Wuhan, China, identified as a new Coronavirus beta strain ß-CoV from Group 2B, with a genetic similarity of approximately 70% to SARS-CoV, the virus responsible. of SARS. In the first half of February, the International Committee on Taxonomy of Viruses (ICTV), in charge of the designation and naming of the viruses (i.e., species, genus, family, etc.), thus definitively named the new coronavirus as SARS-CoV-2. This article highlights the main knowledge we have about the biomolecular and pathophysiologic mechanisms of SARS-CoV-2.

This review is devoted to present the history of CARDIOSIM© software simulator platform, which was developed in Italy to simulate the human cardiovascular and respiratory system. The first version of CARDIOSIM© was developed at the Institute of Biomedical Technologies of the National Research Council in Rome. The first platform version published in 1991 ran on PC with disk operating system (MS-DOS) and was developed using the Turbo Basic language. The last version runs on PC with Microsoft Windows 10 operating system; it is implemented in Visual Basic and C++ languages. The platform has a modular structure consisting of seven different general sections, which can be assembled to reproduce different pathophysiological conditions. The software simulator can reproduce the most important circulatory phenomena in terms of pressure and volume relationships. It represents the whole circulation using a lumped-parameter model and enables the simulation of different cardiovascular conditions according to Starling’s law of the heart and a modified time-varying elastance model. Different mechanical ventilatory and circulatory devices have been implemented in the platform including thoracic artificial lung, ECMO, IABP, pulsatile and continuous right and left ventricular assist devices, biventricular pacemaker and biventricular assist devices. CARDIOSIM© is used in clinical and educational environment.

This study investigates the impact of Artificial Intelligence (AI) on traditional firms, specifically examining how scalable network properties and the integration of Environmental, Social, and Governance (ESG) considerations affect financial margins, sustainability, and bankability. The research addresses the core question of how AI investments can drive economic value by enhancing EBITDA and financial stability while aligning firms with sustainability goals. Using advanced network theory and multilayer models, the study reveals that AI-driven scalability significantly improves a firm's financial performance, making it more attractive to investors and financial institutions. Additionally, the integration of ESG factors further enhances operational efficiency, market valuation, and long-term financial stability. The study introduces an innovative "with-or-without" analysis to quantify the comparative benefits of AI and ESG integration, underscoring the role of these technologies in driving sustainable growth and addressing bankability concerns in traditional firms. This comprehensive approach offers new insights into the evolving dynamics of AI, ESG, and corporate finance.

In this study electrophoretic deposition (EPD) technique is used to prepare chitosan-based coatings with enhanced antibacterial activity suitable for bone implants applications. We designed, prepared and compared physic-chemical and biological properties of coatings obtained with commercial chitosan, chitosan enriched with silver nanoparticles and chitosan obtained from insects. With the aim to consider the sustainability issue, silver nanoparticles were directly prepared in the chitosan solution by laser ablation in liquid technique, avoiding the use of chemicals and limiting the production of wastes. Moreover, a sustainable source of chitosan such as Hermetia Illucens exuviae was considered. The EPD process was optimized by adjusting parameters like voltage and deposition time to achieve ideal coating thickness and adhesion. The prepared films were characterized by spectroscopic and microscopic techniques such as SEM, XRD, and FTIR. Antimicrobial tests against E. coli and S. aureus revealed that silver nanoparticles enhanced the antibacterial properties of the polymer, whereas biological evaluation using the WST8 test on MG63 human osteoblasts-like cells showed that all coatings are non-toxic. Finally, chitosan obtained from insect showed comparable properties with respect to the commercial polymer, suggesting it could replace seafood-derived chitosan in biomedical applications, whereas the Ag@chitosan composite demonstrated superior antibacterial activity without compromising its biocompatibility.

Active learning has demonstrated its effectiveness regarding the improvement of the capacities of abstraction, comprehension, and development of cognitive, expression and relationship skills of the students. In this study, the redesign and implementation of an electromagnetism course for engineering students is presented, under the methodology of Backward Design (BD), recognized for its attributes for the development of active learning and its possibility of specifying the fun-damentals and principles of engineering education in the development of syllabus in higher ed-ucation. The purposes of this study were: 1) To implement the Backward Design (BD) methodology to develop argumentative, purposeful and interpretive skills in an electromagnetism course; 2) Design and apply rubrics to evaluate tests and laboratory reports, determine the level that best suits the knowledge, skills and competencies of students. 3) Assess the perception of students regarding the use of the methodology, their contributions to the development and understanding of the concepts of the course. The results of this educational research experience shown that the BD teaching approach was pedagogical and significantly superior to conventional models towards improving knowledge and skills of electromagnetism based on Hake's statistic (h) reached 0.73 that allow us to conclude that there was a learning gain in the students.

As a form of protection, a nature park is often created to protect and valorise natural and cultural heritage in peripheral rural areas. However, in terms of multi-functionality, new nature parks are incorporated into traditional productive activities, such as recreational and tourist activities, which sometimes compromise sustainability. The research objective is to study the relationship between tourism and sustainability in the Nature Parks of “Sierra de Aracena y Picos de Aroche”, “Sierra Norte de Sevilla” and “Sierra de Hornachuelos” that makes up the Dehesas de Sierra Morena Biosphere Reserve in Andalusia, Spain. Therefore, selective interviews have been carried out with the stakeholders to establish their perception of sustainable tourism and the presence of dominant discourses. The main conclusions indicate (1) the presence of different dominant discourses on sustainability, namely the conservationist and mercantilist ones, with the prevalence of the economic dimension; (2) poor awareness and adaptation to the context of global change; and (3) the presence of competitive relationships that generate difficulties for the governance of sustainable tourism.

This study continued the analysis of immunization with the receptor binding domain (RBD) associated with the adjuvants Dimethyldioctadecylammonium bromide (DDA) and Saponin (Sap) (RBD+DDA/Sap) or Aluminum hydroxide (AH) and outer membrane vesicles (OMVs) of Neisseria meningitidis (RBD+AH/OMV); from adult to old age and assessed maternal-fetal transference of antibodies. Outbred Swiss mice were immunized with 2 intramuscular (IM) doses with the antigenic preparations RBD+DDA/Sap, RBD+AH/OMV or RBD alone. The humoral immune response was evaluated using ELISA, avidity-ELISA, Immunoblotting and a Omicron-surrogate-neutralization assay (BA.1), while the cellular immune response was analyzed by ELISpot. Our previous work studied the IgG response; here, we verified that IgM levels were higher right after the immunization doses, but, as IgG, it persisted until 368 days after the immunization. The avidity of IgM increased from low to intermediate-to-high after the booster dose. RBD+DDA/Sap presented neutralizing indexes against Omicron at days 47 and 176, while RBD+AH/OMV showed neutralization on days 21, 47 and 176. Cellular response, measured 465 days after immunization, revealed IFN-Y and IL-4 secretion. The offspring of RBD+DDA/Sap had detectable antibodies, which decreased around 45 days after birth, the last point we analyzed. The results suggested that DDA/Sap is a promising adjuvant mixture to enhance humoral and cellular immune response against SARS-CoV-2, improving maternal-fetal transference of antibodies; cross-reactivity with Omicron variant; and the maintenance of antibodies for a long period.

We discuss the consequences of the unique symmetry of the de Sitter spacetime. This symmetry leads to the specific thermodynamic properties of the de Sitter vacuum, which produces the thermal bath for matter. The de Sitter spacetime is invariant under the modified translations, ${\bf r}\rightarrow {\bf r} -e^{Ht}{\bf a}$, where $H$ is the Hubble parameter. For $H\rightarrow 0$, this symmetry corresponds to the conventional invariance of Minkowski spacetime under translations ${\bf r}\rightarrow {\bf r} -{\bf a}$. Due to this symmetry, all the comoving observers at any point of the de Sitter space perceive the de Sitter environment as the thermal bath with temperature $T=H/\pi$, which is twice larger than the Gibbons-Hawking temperature of the cosmological horizon. This temperature does not violate the de Sitter symmetry, and thus does not require the preferred reference frame, as distinct from thermal state of matter, which violates the de Sitter symmetry. This leads to the heat exchange between gravity and matter, and to instability of de Sitter state towards the creation of matter, its further heating, and finally to the decay of the de Sitter state. The temperature $T=H/\pi$ determines different processes in the de Sitter environment, which are not possible in the Minkowski vacuum, such as the process of ionization of an atom in the de Sitter environment. This temperature also determines the local entropy of the de Sitter vacuum state, and this allows us to calculate the total entropy inside the cosmological horizon. The result reproduces the Gibbons-Hawking area law, which is related to the cosmological horizon, $S_{\rm hor}=4\pi KA$, where $K=1/16\pi G$. This supports the holographic properties of the cosmological event horizon. We extend the consideration of the local thermodynamics of the de Sitter state using the $f({\cal R})$ gravity. In this thermodynamics, the Ricci scalar curvature ${\cal R}$ and the effective gravitational coupling, $K$, are thermodynamically conjugate variables. The holographic connection between the bulk entropy of the Hubble volume, and the surface entropy of the cosmological horizon remains the same, but with the gravitational coupling $K=df/d{\cal R}$. Such connection takes place only in the $3+1$ spacetime, where there is the special symmetry due to which the variables $K$ and ${\cal R}$ have the same dimensionality. We also consider the lessons from the de Sitter symmetry for the thermodynamics of black and white holes.

Optical characterization and thermal aging tests are performed on a sputter-deposited coating, consisting of SiO₂/Cr₂O₃/Cr/Cr₂O₃ layers, designed and developed as a selective solar absorber to be used for unconcentrated solar thermal applications. Both measurements are performed by using a home-made apparatus, which mimics a flat plate collector under high vacuum. A Performance Criterion (PC_η(T)), based on absorber efficiency is proposed, and a forecast of service lifetime is obtained. As a result of the thermal aging tests, the selective solar absorber under study appears to be highly efficient at mid temperatures (up to 573 K) and thermally stable at temperatures (up to 690 K).

In this study, Al-Al4C3 compounds were manufactured by mechanical milling followed by heat treatment. To analyze the microstructural evolution, the composites were sintered at 550°C during different sintering times of 2, 4 and 6 hours. The mechanical results suggest that dislocation density and crystallite size primary contribute to hardening before the sintering process, with a minimal contribution from particle dispersion in this condition. The compound exhibited a significant 75% increase in hardness after 2 hours of sintering, primarily attributed to the nucleation and growth of Al4C3 nanorods. The HRTEM analysis, combined with ge-ometric phase analysis (GPA) at and near the Al-Al4C3 interface of the nanorods, revealed strain field distributions primarily associated with partial screw dislocations and the presence of closely spaced dislocation dipoles. These findings are consistent with the microstructural parameters determined from X-ray diffraction pattern analysis using the convolutional multi-ple whole profile (CMWP) method. This analysis showed that the predominant dislocation character is primarily of the screw type, with the dislocation dipoles being closely correlated. Based on these results, it is suggested that samples with a lower weight percentage of rein-forcement and longer sintering times may experience reduced brittleness in Al/Al4C3 compo-sites. Strengthening contributions were calculated using the Langford–Cohen and Taylor equations.

Mangroves are critical ecosystems providing essential environmental services, making their conservation crucial. High-resolution remote sensing, particularly through unmanned aerial vehicles (UAVs), offers unprecedented resolution in ecosystem mapping. This study utilizes a multispectral sensor mounted on a UAV to map mangroves at Cardoso Island on Brazil’s southeastern coast and Suape on the northeastern coast. Using Geographic Object-Based Image Analysis (GEOBIA) for segmentation and classification, we employed machine learning algorithms to classify the primary mangrove species: Laguncularia racemosa, Rhizophora mangle, and Avicennia schaueriana. Two flight altitudes were used: a higher altitude for broad-scale mapping and a lower altitude for classification training, supplemented by field measurements for calibration. This method enabled the precise delineation of tree crowns and provided insights into species distribution and zonation, influenced by the distinct estuarine conditions of tides and sediment input. The high-resolution mapping achieved in this study enhances detailed analyses of mangroves, improving ecological models and biophysical estimations such as biomass and blue carbon stocks. This work highlights the potential of UAV-based multispectral imaging in advancing mangrove research and conservation efforts.

Accurate assessment of crop vegetative state is crucial for agricultural management, particularly under varying environmental conditions. However, detailed field experiments face logistical and cost challenges. The Normalized Difference Vegetation Index (NDVI) and other vegetation indices offer non-invasive and large-scale solutions for assessing plant health. The integral of the NDVI curve over time aggregates NDVI values, providing a comprehensive view of vegetation dynamics, surpassing the insights from individual NDVI measurements. Developing robust methodologies to calculate the vegetation activity index (VAI) based on NDVI integral is essential for efficient vegetation evaluation, aiding sustainable agriculture. Biostimulants enhance plant growth and resilience against stressors. Sugarcane, vulnerable to various stresses, can benefit from biostimulants, especially under drought conditions. Studies on biostimulant effects on sugarcane's metabolism, yield, and quality have been limited. Analysis of NDVI data indicated significant variations between treated and untreated areas over time. Polynomial regression models (R² between 0.921 and 0.959) demonstrated a strong ability to explain vegetation variability. Normality tests confirmed that VAI and Tons of Sugar per Hectare (TSH) data follow a normal distribution. There was no significant difference in VAI between treated and untreated areas during the plant development cycle, but a significant increase in VAI was observed in treated areas post-treatment (p=0.021). No significant difference in TSH was found, indicating no impact on sugar productivity. L-alpha biostimulant increased vegetation activity during critical growth periods but did not affect sugar yield. Return on investment analysis suggested high profitability of the treatment.

Alginate-gelatin (Alg-Gel) hydrogels have been used experimentally but not clinically associated with mesenchymal stromal / stem cells (MSCs) to guide bone tissue formation. One of the main challenges for its clinical application is optimizing Alg-Gel stiffness to guide osteogenesis. In this study, we investigated how Alg-Gel stiffness could modulate the dental pulp stem cell (DPSCs) attachment, morphology, proliferation, and osteogenic differentiation, identifying the optimal condition to uncouple osteogenesis from the other cell behaviors. An array of Alg-Gel hydrogels was prepared by casting different percentages of Alg and Gel being crosslinked with 2 % CaCl2. We selected two hydrogels, one with 11± 1 kPa called “low” stiffness and one with 55 ± 3 kPa called “high” stiffness. Hydrogel analyses showed that the average swelling rates were 20 ± 3% for low and 35 ± 2% for high hydrogels. The degradation percentage was 47 ± 5% and 18 ± 2% for low and high hydrogels, respectively. Both hydrogel types showed homogeneous surface shape and pro-tein (Alg-Gel) interaction with CaCl2 as assessed by FTIR-ATR and XPS. Cell culture showed good adhesion of the DPSCs to the hydrogels and proliferation. Furthermore, better osteogenic activity was obtained with high-stiffness hydrogels. In summary, this study confirms the possibility of characterizing and optimizing the stiffness of alginate-gelatin gel to guide osteogenesis in vitro without altering other cellular properties of DPSCs.

This paper describes the preparation and description of four new complexes [Bu₂Sn(AA)Cl] (AA = glycine, DL-valine and L-leucine) and [Bu₂SnPhen₂] (Phen = DL-phenylalanine) They were characterized by elemental analyses of carbon, hydrogen, nitrogen, chlorine and tin; and by infrared, ^119mSn-Mössbauer and ^119mSn-RMN spectroscopies, and by the applications of TG and DSC techniques in dynamic helium atmosphere. For the [Bu₂Sn(AA)Cl], trigonal bipyramidal tin species, AA were coordinated bidentatedly by the carboxylic oxygen and by the NH₂ group. The [Bu₂SnPhen₂)], with tin atoms in trans-octahedral sites, had the Phen-coordinated by both carboxylic oxygen atoms.

This work deals with the performance evaluation of novel flat photovoltaic-thermal (PV-T) modules under vacuum. Through a 1D (dimensional) steady-state-energy-balance numerical model developed in MATLAB, two different layouts are studied: the first consisting of a photovoltaic (PV) cell installed just below the glass encapsulating the flat panel, and the second where the PV cell is placed on the selective solar absorber (SSA). In both cases the thermal and electrical efficiencies have been evaluated at different SSA operating temperatures, in the range of 323 K to 423 K. The analysis has been conducted at different energy bandgap (E_bg) of the PV cell and assuming a variable transmittance or emittance of the PV cell, depending on the design. The two systems efficiency comparison has been carried out at the same operating temperature. Overall, this work highlights the importance of high vacuum insulation, which guarantees the reduction of convective thermal losses, and shows that the maximum energy is produced for PV cells with E_bg ≈1.5-1.7 eV, depending on layout and operating temperature, by including the thermal output in the PV-T optimization. The energy and exergy efficiencies obtainable using the proposed PV-T systems are considerably improved compared to the results previously reported in the literature.

The mining industry is known for the intense environmental impacts it triggers, especially when it is developed in an open environment. Pit lakes are formed in depleted deposits and may be promising opportunities for use by society as well as troubling environmental liabilities. While these artificial basins are increasing numerically in many parts of the world, they are still little known researchers in the Environmental Sciences, which makes their environmental management challenging. The main objective of this study was to evaluate the environmental quality of sediments from three deactivated open-pit gold mines, located in the Mara Rosa, Brazil, through chemical, ecotoxicological and genotoxicology analyses. For this purpose, we collected samples in the dry season boom, and subsequently, we analysed metals. In sequence, acute ecotoxicological and a genotoxicology test (comet assay) were developed with Danio rerio fishes, in concentrations of 3.12%; 6.25%; 12.5%; 25%; 50% and 100%, in addition to the control group. The results indicated that the three lakes are environmentally compromised, especially Lago Azul, whose waters and sediments are undergoing an intense process of geological conditioning. Our results did not verify the ecotoxicity of the sediments of any of the lakes, only behavioural alterations in the test organisms exposed to the concentrations of 25%, 50% and 100% of the samples obtained in the Lago Azul. About the sediments, DNA damage at Danio rerio was detected in the three investigated environments, although fishes kept in the water sampled at Lago Azul presented the most extension of DNA damages.

In the context of energy conversion from renewable sources to distribution grids (insulated or not), a converter is often required to transfer energy from a low voltage source, towards three-phase grids. This paper presents the HW design, the simulation results and the conversion performance of a CSI converter intended to interface low voltages renevable sources to three-phase grids. The main focus of this paper is to obtain the best performance in terms of voltage increase towards the output stage while maximizing the conversion efficiency. In comparison with the currently used energy conversion systems for small photovoltaic systems, hereafter some solutions were adopted to level and maximize the energy flow from the source to the DC-link and improve the quality of current supplied in terms of harmonic distortion. The proposed system is composed of two conversion stages: the first, voltage-to-current, the second current-to-current via a three-phase CSI bridge modulated with SVM technique. The stages are not completely decoupled from an electrical point of view, therefore, in order to mitigate the effects of these interactions, synchronization strategies have been adopted.

Among the leading immersive technologies, Augmented Reality is one of the most promising and empowering to support designers in production environments. This research investigates the application of mobile augmented reality, based on the Web, as a mediation tool focused on cognitive activities of reading and understanding of Technical Drawings in the production and assembly for Tailor Made projects of the scenographic industry. In this context, the research presents a method to use the WebAR to improve the reading of technical drawings, seeking efficiency on the visualization of models and the exchange of information between professionals, involved in the processes of design, production and assembly of products, in the scope of scenography. This mediation tool was developed using Web AR platforms, compatible with native libraries (ARCore and ARKit) to ensure, first, compatibility with commonly used devices that workers or businesses can access, and secondly, to leverage hybrid tracking techniques that combine vision and sensors to improve the reliability of augmented reality viewing. The proposed solution adopts multiple tracking and navigation techniques in order to expand Space Skills components to provide greater exploratory freedom to users. The research process took place in the light of the Design Science Research Methodology and the DSR-Model, since it aimed to develop a solution to a practical problem, as well as to produce knowledge from this process. Field experiments were conducted in two real companies, with end users on their respective mobile devices, in order to evaluate usability and behavioral intent, through the Acceptance, Intent and Use of Technology questionnaires; and perceived mental workload, NASA-TLX. The experimental results show that the adoption of this tool reduces the cognitive load in the process of reading technical drawings and project´s understanding. In general, it´s usability and intent to use provide significant levels of satisfaction, being positively accepted by all participants involved in the study.

The natural history of COVID-19 caused by SARS-CoV-2 is extremely variable, ranging from asymptomatic infection, to pneumonia, and to complications eventually fatal. We propose here the first model, explaining how the outcome of first, crucial 10-15 days after infection, hangs on the balance between the cumulative dose of viral exposure and the efficacy of the local innate immune response (natural IgA and IgM antibodies, MBL). If SARS-CoV-2 runs the blockade of this innate immunity and spreads from the upper airways to the alveoli in the early phases of the infections, it can replicate with no local resistance, causing pneumonia and releasing high amounts of antigens. The delayed and strong adaptive immune response (high affinity IgM and IgG antibodies) that follows, causes severe inflammation and triggers mediator cascades (complement, coagulation, and cytokine storm) leading to complications often requiring intensive therapy and being, in some patients, fatal. Strenuous exercise and high flow air in the incubation days and early stages of COVID-19, facilitates direct penetration of the virus to the lower airways and the alveoli, without impacting on the airway’s mucosae covered by neutralizing antibodies. This allows the virus to bypass the efficient immune barrier of the upper airways mucosa in young and healthy athletes. In conclusion, whether the virus or the adaptative immune response reach the lungs first, is a crucial factor deciding the fate of the patient. This “quantitative and time-sequence dependent” model has several implications for prevention, diagnosis, and therapy of COVID-19.

Approximately more than 120 transthyretin mutations are known whose variation in clinical presentation is heterogeneous, as the course of disease onset depends on genetic variation and level of penetrance. It is little known in Ecuador, and some of the reported cases; suggest to the family tree analysis that they come from a province that is possibly considered endemic. The main objective is to carry out a descriptive cross-sectional analysis on the presentation of transthyretin amyloidosis in families carrying the p.Ser43Asn gene from the index case identified.

Heavy metal pollution is an increasing global concern. Among heavy metals, mercury (Hg) is especially dangerous because of its massive release into the environment and high toxicity, especially for aquatic organisms. The molecular response mechanisms of algae to Hg exposure are mostly unknown. Here, we combine physiological, biochemical, and transcriptomic analysis to provide, for the first time, a comprehensive view on the pathways activated in Chromera velia in response to toxic levels of Hg. Production of hydrogen peroxide and superoxide anion, two reactive oxygen species (ROS), showed opposite patterns in response to Hg²⁺ while reactive nitrogen species (RNS) levels did not change. A deep RNA sequencing analysis generated a total of 307,738,790 high-quality reads assembled in 122,874 transcripts, representing 89,853 unigenes successfully annotated in databases. Detailed analysis of the differently expressed genes corroborate the biochemical results observed in ROS production and suggests novel putative molecular mechanisms in the algal response to Hg²⁺. Moreover, we indicated that important transcription factor (TF) families associated with stress responses differentially expressed in C. velia cultures under Hg stress. Our study presents the first in-depth transcriptomic analysis of C. velia, focusing on the expression of genes involved in different detoxification defense systems in response to heavy metal stress.

This paper focuses on the role of the most common mineralogical techniques applied to the identification of the different statuary qualities in white, grey and black Göktepe marble. For this purpose, a Roman case of sculpture marble collection from the rural villa of Valdetorres de Jarama (central Iberia), of the 4th century AD, is presented. The mythological statuary, combining white, grey and black marbles, are one of the most outstanding marble collections in Aphrodisian style found in Hispania. The analytical results (Petrography, Cathodoluminescence, C and O isotopes, and Sr and Mn concentration) support the identification of two varieties of “black” Göktepe, traditionally named as bigio morato and bigo antico, as well as the best statuary quality on white Göktepe. In addition, the analytical identification of other Asiatic marbles in Valdetorres collection, a white coarse-grained originally from the quarries of Aphrodisias city and one small piece identified as Carian red from Iasos, corroborates the already suggested strong connection existing between artists and the stone material they chose for their works. Finally, it is noteworthy the identification carried out on the marble of the bases that served as seats for the sculptures, as it is a white marble of lower quality whose analytical characteristics are consistent with the Microasiatic marble of Denizli. The use of these exotic and exceptional raw materials confirms the taste for luxury and decorative richness in Late Antique Hispanic rural villae and contributes to a better understanding of the distribution of Aphrodisian productions in the Western Roman provinces.

In this work, the influence of catalyst reuse and reaction time on the yield and quality of organic liquid products (OLP) obtained in a cracking pilot plant at 450 °C and 1.0 atm has been systematically investigated. The distillation of OLP produced 04 (four) distilled fractions. The quality of the biofuels was certified by physical-chemical analysis, as well as FT-IR and GC-MS analysis. The experimental results showed the feasibility of applying the spent sodium carbonate twice in catalytic cracking of vegetable oils. The physical-chemical properties (density, viscosity, acid value, saponification value, and flash point) of OLP decrease as the reaction time increases. The distillation of OLP yields 62.35% (wt.), producing green-like gasoline, kerosene, and diesel fractions rich in hydrocarbons. Therefore, biofuels-like fractions produced by distillation of OLP have a great potential for replacing partially petroleum derived fuels.

Background/Objectives: interpretation of evidence on de-escalation of triple therapy with with-drawal of inhaled corticosteroids (ICS) to dual bronchodilator therapy with a long-acting musca-rinic antagonist (LAMA) and a long-acting beta-agonist (LABA) in patients with chronic obstruc-tive pulmonary disease (COPD) is conflicting. We evaluated the efficacy and safety of ICS discon-tinuation from LABA-LAMA-ICS triple therapy compared to its continuation. Methods: we searched PubMed, Embase, Scopus, Web Of Science, clinicaltrial.gov and CENTRAL for RCTs and observational studies from inception to March 22, 2024, investigating the effect of triple therapy de-escalation with withdrawal of ICS to dual therapy on the risk of COPD exacerbation, pneumonia and lung function. This study was registered with PROSPERO, CRD42024527942. Results: 3335 studies were screened; three RCTs and three real-world non-interventional studies were ultimately identified as eligible. Analysis of the time to the first moderate or severe exacerbation showed a pooled HR of 0.96 (95% CI, 0.80 to 1.15; I²=77%) for ICS withdrawal compared with triple therapy continuation. Analysis according eosinophil levels showed that COPD subjects with ≥300 eosino-phils/µL had a significant increase in the incidence of moderate or severe exacerbations when de-escalated from ICS/LABA/LAMA to LABA/LAMA (pooled HR: 1.35, 95% CI 1.00-1.82; I2: 56%). The ICS withdrawal in favour of LABA/LAMA did not significantly affect the risk of mortality and pneumonia. Conclusions: the main findings of this meta-analysis are consistent with current recommendations and suggest that the use of eosinophil counts may be of help in guiding maintenance therapy. However, methodological heterogeneity between the included studies is evident.

Today, mechanical tracking systems have been downsized to allow them to be used in the field of airborne laser communications and in the military domain. Risley systems are used for this purpose, which work by directing a beam of light to a given target point, this procedure is commonly known as the inverse problem. In this paper, an analytical method, the geometric method, has been designed and developed to determine the beam steering in a Risley system and solve the inverse problem. The method focuses on different geometric shapes, like circumference or ellipse, that are described when the beam passes through the second prism. The accuracy and efficiency of the geometric method has been analysed and found to be faster than the two-step method. Furthermore, the geometric method has been implemented in an iterative process and an accuracy of up to 1 pm has been achieved. This high accuracy would allow the geometric method to be applied in fields such as lithography, stereolithography or 3D printers.

Several methods can be used to evaluate antibody avidity, one of which is the modified ELISA, in which a chaotropic agent is added to disrupt the binding between the antigen and the antibody. Although the avidity index provides relevant information about the functionality of antibodies, it does not allow us to characterize which antigens the antibodies are strongly bound to. To this end, we adapted the Immunoblot and Dot-Blot techniques by adding potassium thiocyanate (KSCN) after incubating nitrocellulose membranes with serum from mice immunized with Neisseria meningitidis outer membrane vesicles (OMVs) or serum from mice immunized with recombinant receptor-binding domain (RBD) of SARS-CoV-2, with different adjuvants for each antigen. In terms of results, when standardizing the incubation time of sera with KSCN, we observed that 5 minutes was the ideal time for both assays, however, when using different dilutions of serum from mice immunized with RBD, there was an influence on the strength of antigen-antibody binding. For the N. meningitidis assay, the antibodies maintained high avidity for the antigens present in the OMVs, PorA, NadA, and Opa, especially in the presence of the aluminum hydroxide adjuvant. The research showed that standardizing the Immunoblot and Dot-Blot in the same assay optimizes time and resources, allowing qualitative analysis for two different antigens, and resulting in more robust information for immunization studies against these pathogens.

Balandra, one of the most popular beaches in La Paz, Baja California Sur, was declared a flora and fauna protection area in 2012 and, in 2021, was declared the best beach in Mexico. More recently, it was included among the ten most beautiful beaches in the world. Currently, this beach faces overcrowding. Formulating effective management policies depends, to a certain extent, on the knowledge of their recreational value and visitor characteristics. Recreational value allows us to know the benefits of the tradeoffs among the ecosystem services and society and exhibit the value of possible damages to marine ecosystems. Like the one caused in 2022 by the fire of a tourist boat inside Balandra. Using the individual travel cost method and applying 159 questionnaires to site visitors, four models were estimated to calculate the individual willingness to pay for accessing Balandra, which ranges between 3.86 and 10.38 US$/day/visitor. Recreational economic value (REV) for Balandra was estimated using two essential criteria. One, total of visitors registered in 2021. Two, daily maximum carrying capacity. We also calculated the REV as a proxy of the welfare loss derived from the site's closure. Finally, possible environmental and economic policy instruments that could be implemented are discussed.

Antimicrobial peptides (AMPs) are regarded as a promising alternative to traditional antibiotics in the face of ever-increasing resistance. Our research has focused on crotalicidin (Ctn), an AMP from a snake venom, and a fragment thereof, Ctn[15-34], with improved in vitro antimicrobial and anticancer activities and remarkable serum stability. As the retroenantio versions of both AMPs maintained favorable profiles, in this work we evaluate the in vivo efficacy of both the na-tive-sequence AMPs and their retroenantio counterparts in a murine infection model with Aci-netobacter baumannii. A significant reduction in bacterial levels is found in the mice treated with Ctn[15-34]. However, contrary to expectations, the retroenantio analogues either exhibit toxicity or lack efficacy when administered to mice.

Objectives: To investigate the etiology of amyotrophic lateral sclerosis (ALS) in an adult female patient. Methods: We conducted trio genome sequencing on a 35-year-old woman with progressive weakness in her left upper limb, as well as on her parents. Prior to sequencing, we performed a comprehensive neurological work-up on the patient, including neurological exam, electrophysiology, biomarker assessment, and brain and spinal cord MRI. Results : The propositus experienced weakness and atrophy in her left hand 6 months before the evaluation. This was associated with brisk reflexes and Hoffman sign in the same arm. Electroneuromyography revealed lower motor neuron involvement in three body regions. Neurofilament light chains were elevated in her cerebrospinal fluid. Brain imaging showed asymmetrical T2 hyperintensity of the corticospinal tracts and T2 linear hypointensity of the precentral gyri. Genome trio sequencing identified a likely pathogenic de novo variant in the propositus’s KIF1A gene (NM_001244008.2): c.574A>G, p.(Ile192Val). Discussion: Pathogenic variants in the KIF1A gene have been associated with a wide range of neurological manifestations called KIF1A-associated neurological diseases (KAND). The present report describe a likely pathogenic de novo variant in KIF1A associated with ALS, expanding the phenotypic spectrum of KAND and our understanding of the pathophysiology of ALS.

This paper provides a comparative analysis of AES (Advanced Encryption Standard) and Salsa20 algorithm implementations, focusing on power consumption efficiency in passive RFID (Radio Frequency Identification) tags and ultra-low-power devices. The main objective of this work is to determine which of these algorithms is more suitable to operate in these types of devices. For this purpose, ASIC (Application-Specific Integrated Circuit) implementations of AES and Salsa20 based on low-power approaches were developed and their power consumption was evaluated. Results demonstrate that Salsa20 power consumption is lower than AES (2.82μW and 4.01μW, respectively - both in 0.18μm), indicating that Salsa20 is a better choice than AES for passive RFID tags.

Introduction: This study aimed to evaluate whether radiomic features extracted solely from the edema of soft tissue sarcomas (STS) could predict the occurrence of lung metastasis in comparison with features extracted solely from the tumoral mass. Materials and Methods: We retrospectively analyzed magnetic resonance imaging (MRI) scans of 32 STSs including 14 with lung metastasis and 18 without. Segmentation of the tumor mass and edema was performed for each MRI examination. A total of 107 radiomic features were extracted for each mass segmentation and 107 radiomic features for each edema segmentation. A two-step feature selection process was applied. Two predictive features for the development of lung metastasis were selected from the mass-related features, as well as two predictive features from the edema-related features. Two random forest models were created based on these selected features; 100 random subsampling runs were performed. Key performance metrics including accuracy and area under the ROC curve (AUC) were calculated, and the resulting accuracies were compared. Results: The model based on mass-related features achieved a median accuracy of 0.83 and a median AUC of 0.88, while the model based on edema-related features achieved a median accuracy of 0.75 and a median AUC of 0.79. Statistical analysis comparing the accuracies of the two models revealed no significant difference. Conclusion: Both models showed promise in predicting the occurrence of lung metastasis in soft tissue sarcomas. These findings suggest that radiomic analysis of edema features can provide valuable insights into the prediction of lung metastasis in soft tissue sarcomas.

The amplified production of reactive oxygen species (ROS) or reduced oxidant protection is described as oxidative stress, which contributes to the increase in several disorders, notably obesity and neurodegenerative diseases. Flavonoids are polyphenol compounds found in a variety of foods of plant origin, such as berries, with a basic chemical structure consisting of an aromatic ring linked to a benzene ring and a pyran ring. Flavonoids have neuroprotective activity and promote synaptogenesis and neurogenesis and are also capable of inhibiting oxidative stress and neuroinflammation. Anthocyanins are water-soluble natural pigments that belong to the flavonoid class and have antioxidant and anti-inflammatory properties, helping to reduce chronic inflammation associated with various health conditions, including obesity. In addition, flavonoids and anthocyanins can modulate the expression of genes involved in lipid metabolism, promoting the oxidation of fatty acids and the reduction of lipid synthesis, contributing to the reduction of body fat accumulation. One of the most abundant flavonoids in the natural environment, quercetin, is found mainly in the form of O-glycoside derivatives and rarely as an aglycone. Quercetin has antioxidant properties, against diseases such as cancer; It also acts to combat allergic reactions, inflammatory processes, platelet disorders, obesity, hypertension and atherosclerotic and hypercholesterolemic disorders. Anthocyanins can activate intracellular signaling pathways, such as the AMPK (AMP-activated protein kinase) pathway, which has a crucial role in regulating energy metabolism and glycemic homeostasis. Activation of this pathway increases glucose uptake and fatty acid oxidation, favoring weight loss and improving insulin sensitivity. This review article aims to analyze the effects of using berries in controlling obesity and its role as a reducing factor for mild cognitive decline. A systematic review will be carried out following the recommendations of the Preferred Reporting Items for Systematic Reviews and Meta-Analyze. We will search the following electronic databases: PubMed (Medline), Science Direct, Scopus and Web of Science.

A new frontier in solar thermal panel technology can be a high vacuum collector, thick enough to be equipped with solar concentrators based on non-imaging optics, such as the Compound Parabolic Concentrators (CPC). The high vacuum technology guarantees higher operating temperatures thanks to the enhanced thermal insulation, which leads to pay particular attention to the absorber radiative emission. In this paper by means of numerical simulations we compare the efficiency of a flat selective solar absorber under high vacuum to the efficiency of a CPC under high-vacuum collector.

Chagas disease (CD) is a neglected tropical parasitic disease caused by the protozoan Trypanosoma cruzi. Unfortunately, the current etiological treatment for CD is unsatisfactory, due to the high toxicity and low cure efficacy of compounds, mainly during the chronic phase of this disease. Thus, the discovery of new drugs for the treatment of CD is urgent. In the present study, we report the synthesis of a series of guanidines and its evaluation in in vitro assays to determine the trypanocidal effects on the Tulahuen T. cruzi strain, transfected with a β-galactosidase reporter gene, in comparison to the cytotoxic effects on vertebrate cells. The most potent and selective compounds LQOF-G1 and LQOF-G29 were considered good drug prototypes and candidates for in vivo tests using mice. Both compounds possess an electron withdrawing group on the aniline moiety, namely a NO2 and Br group, respectively, which effectively decrease the electron density. LQOF-G29 stands out among the investigated compounds due to the replacement of the benzyl group by methyladamantane.

Vitamin A and E are important during pregnancy, the neonatal period, and childhood. The objective of this study was to assess whether maternal RRR-a-tocopherol supplementation affects serum and breast milk retinol. Serum was collected at baseline and twenty days later, and breast milk, at baseline, and on days 1, 7, and 20 after delivery. After the baseline serum collection, the supplemented group (n=16) received a single 400 IU of RRR-α-tocopherol. The control group (n=18) was only performed collections. Retinol and alpha tocopherol levels were determined by liquid chromatography. Serum retinol and alpha tocopherol at baseline and 20 days after delivery indicated proper vitamin A (> 20 µg/dL) and E (> 516 μg/dL) statuses in the control and supplemented groups (p > 0.05). Colostrum retinol levels on days 1 and 7 after delivery were significantly higher in the supplemented group (p = 0.018 and p = 0.012, respectively). Maternal vitamin E supplementation increased colostrum retinol by 52.23% and 111.2%, 24 hours and 7 days, respectively. However, retinol in mature milk did not differ between the groups (p > 0.05). In conclusion, the supplementation with 400 IU of RRR-α-tocopherol improved vitamin A bioavailability in breast milk.

Smith-Magenis syndrome is a complex neurobehavioral genetic disorder. The spectrum of SMS phenotype is broad but commonly includes craniofacial, neurobehavioral, and otolaryngologic features. While the etiology of SMS is commonly attributed to one copy interstitial deletion in the 17p11.2 region (90-95% of cases), variants identified by sequence analysis in RAI1 have also been reported in 5-10% of cases. The phenotypic spectrum of patients with RAI1 sequence alterations is not clear. In this study, we report a 9-year-old male with global cognitive and psychomotor developmental delay, musculoskeletal and cardiovascular abnormalities, and dysmorphic craniofacial features. Whole genome quad analysis of the proband, unaffected parent, and unaffected brother identified a novel de novo RAI1:c.2736delC variant. This is the first report of this variant in the literature. This report also highlights the details of the genome analysis and this patient's phenotypic spectrum.

The paper presents the main experimental capabilities of the automatic system for the study of the interaction between porous media and atmosphere. This system is one of the possible variants of patent 2-241-477. The paper shows the result of a drying and wetting study of a tailings sample. The sample is 32 cm in height and 29 cm in diameter. The saturation and drying process was carried out at 26 degrees Celsius at the sample surface, an air velocity of 2 m/s and a relative humidity of 60%. The recharge applied to the column surface was 0.3 cm3/cm2/minute. The results show the effectiveness of the system in controlling the spatial-temporal variation of different physical properties of the porous medium in the vertical and surface profile. The controlled variables include volumetric water content, suction, relative humidity, sample weight variation due to recharge or drying, shrinkage, temperature, etc. The experiment shows how the tailings saturate very quickly but dry very slowly. Tailings consolidation occurs in the drying and wetting processes, being higher in the first one.

In Brazil, malaria transmission is mostly confined to the Amazon, where substantial progress has been achieved towards disease control in the past decade. Vector control has been historically considered a fundamental part of the main malaria control programs implemented in Brazil. However, the conventional vector-control tools have been insufficient to eliminate local vector populations due to the complexity of the Amazonian rainforest environment and ecological features of malaria vector species in the Amazon, especially Anopheles darlingi. Malaria elimination in Brazil and worldwide eradication will require a combination of conventional and new approaches that takes into account the regional specificities of vector populations and malaria transmission dynamics. Here we present an overview on both conventional and novel promising vector-focused tools to curb malaria transmission in the Brazilian Amazon. If well designed and employed, these new vector-based approaches may improve the implementation of malaria-control programs, particularly in remote or difficult-to-access areas and in regions where existing interventions have been unable to eliminate disease transmission. However, much effort still has to be put on research expanding the knowledge of neotropical malaria vectors to set the steppingstones for the development of such innovative tools.

In voice analysis, the electroglottographic (EGG) signal has long been recognized as a useful complement to the acoustic signal, if only when the vocal folds are actually contacting, such that this signal has an appreciable amplitude. However, phonation can occur also without vocal fold contacting, as in breathy voice, in which case the EGG amplitude is low, but not zero. It is of great interest to identify the transition from non-contacting to contacting, because this will substantially change the nature of the vocal fold oscillations; yet that transition is not in itself audible. The magnitude of the normalized peak derivative of the EGG signal is a convenient indicator of contacting, but no current EGG hardware has a sufficient signal-to-noise ratio of the derivative. The textbook techniques of spectral thresholding and static notch filtering are straightforward to implement, can run in real time, and can mitigate several noise problems in EGG hardware.

Recently quantum cosmology in tomographic representation was considered. as an important tool to analyze the quantum states of the early universe in relation with the subsequent classical evolution. Given a wave function the correspondent tomogram is defined proportional to the square modulus of its fractional Fourier transform. The classical limit obtained by taking the limit ℏ→0 can be compared with the classical tomogram obtained from the classical hamiltonian formalism. In this paper we show that a set of tomograms can be derived as exact solutions of a third order equation when a de Sitter quantum universe is considered. We finally discuss the limits of this approach to quantum cosmology because the extension to equations with arbitrary potentials can become extremely complicated for potentials given by algebraic polynomials of degree greater than two and therefore also for potentials expressible by arbitrary functions.

Despite advances in algorithms and computational platforms, de-novo genome assembly remains a challenging process. Due to the constant innovation in sequencing technologies (Sanger, SOLiD, Illumina, 454, PacBio and Oxford Nanopore), genome assembly has evolved to respond to the changes in input data type. This paper includes a broad and comparative review of the most recent short-read, long-read and hybrid assembly techniques. In this review, we provide (1) an algorithmic description of the important processes in the workflow that introduces fundamental concepts and improvements; (2) a review of existing software that explains possible options for genome assembly; and (3) a comparison of the accuracy and the performance of existing methods executed on the same computer using the same processing capabilities and using the same set of real and synthetic datasets. Such evaluation allows a fair and precise comparison of accuracy in all aspects. As a result, this paper identifies both the strengths and weaknesses of each method. This comparative review is unique in providing a detailed comparison of a broad spectrum of cutting-edge algorithms and methods.

Repeated exposure to environmental ozone causes a chronic state of oxidative stress. This state is present in chronic degenerative diseases and induces a loss of control of the inflammatory response. The dysfunction of redox system and failures in control the inflammatory responses are involved in a vicious circle that maintains and increases the degenerative process. Intestine also responds to secondary reactive species formed by exposure to ozone doses, generating noxious stimuli that increase degenerative damage. This review aims to elucidate how environmental pollution, mainly by ozone, induces a state of chronic oxidative stress with the loss of regulation of the inflammatory response, both in the intestine and in the brain, where the functionality of both structures is altered and plays a determining role in some neurodegenerative and chronic degenerative diseases. For this purpose, we searched for information on sites like the Cochrane Library Database, PubMed, Scopus, and Medscape. Reviewing the data published, we can conclude that environmental pollutants are a severe health problem. Ozone pollution has different pathways of action, both molecular and systemic, and participates in neurodegenerative diseases such as Parkinson's and Alzheimer's disease as well in bowel diseases as Inflammatory Bowel Disease, Crohn's Disease and Irritable Bowel Syndrome.

Despite the efforts made to stop the tuberculosis (TB) epidemic, it still remains one of the leading causes of death from an infectious disease. Previous work in the group uncovered a new family of amides which showed promising activities against Mycobacterium tuberculosis. A closer look at the literature showed that these compounds are structurally related to the DNB family of DprE1 inhibitors, so, we decided to study a wide range of substituted amides and determine their activity, focusing on unexplored structures related to the dinitrobenzamides (DNB) found in the literature. To synthesize our library of compounds we started from 3,5-dinitrobenzoic acid to form the nitroaromatic core that is characteristic of the DNB’s, to which we then added linear or cyclic amine moieties. Additionally, the impact of terminal aromatic moieties was also assessed for some derivatives, via an ether, ester, or amide bond. In order to obtain the desired derivatives, multiple synthetic approaches were used, mainly focused on nucleophilic addition/elimination reactions, SN2 reactions and Mitsunobu reactions. The activity was impacted mainly by two structural features, the addition of an aromatic moiety as a terminal group and the type of the linker. The most interesting compounds exhibited activities comparable to isoniazid and DNB1. Computational studies were also performed aimed at understanding their possible interactions with DprE1. The most active compounds are a good starting point for further development, and we plan to study an extended family of compounds based in those structures.

Over the last two decades, a considerable amount of equipment has been acquired (spreaders, seeders, sprayers, among others) to respond to the challenges of Precision Agriculture (PA) concept. Most of this equipment has been purchased at a high cost. However, many of them, despite still being functional and equipped with sensors, actuators, and electronic processing units capable of adjusting to variations in speed, have become obsolete in terms of communication, and incompatible with new monitoring and control systems based on the “Isobus” protocol. This work aims to present a solution for updating the control system (“Ferticontrol”) of a “Vicon RS-EDW” spreader with variable rate application (VRA), making it compatible with the “InCommand” system from “Ag Leader”. The solution includes low-cost “Arduino” and “Raspberry Pi” microcontrollers and open-source software. The development shows that it is possible to implement a solution that is accessible to farmers in general. It also provides a niche business opportunity for young researchers to set up small technology-based enterprises associated with universities and research centers. These partnerships guarantee permanent innovation and represent a decisive step towards modern, technological, competitive, and sustainable agriculture.

This work is a generalization of the Lopez-Ruiz, Mancini and Calbet (LMC); and Shiner, Davison and Landsberg (SDL) complexity measures, considering that the state of a system or process is represented by a dynamical variable during a certain time interval. As the two complexity measures are based on the calculation of informational entropy, an equivalent information source is defined and, as time passes, the individual information associated to the measured parameter is the seed to calculate instantaneous LMC and SDL measures. To show how the methodology works, an example with economic data is presented.

(1) Background: The aim of this investigation is to determine the effect of archwires’ deflection on the temperature transitions driving the austenite to martensite transformation (and vice versa) and the force released by NiTi and CuNiTi orthodontic wires. (2) Methods: Round cross-section archwires have been investigated. The calorimetric approach has been used for measuring transition temperatures occurring in the unstressed (e.g. undeflected) state of the wires. Static Thermo-mechanical analysis in a temperature controlled wet environment has been performed in the range of temperature between 5°C and 55°C for measuring temperature transitions occurring in highly deflected archwires in conjunction with the force released by these wires. (3) Results: Plateau forces investigated in Part I and those reported in the literature describes the wire’s behaviour only at deflection levels close to the end point of the force plateau extension detected at 37°C. Upon heating or cooling, the austenite finish (Af) transition temperature and the martensite start (Ms) temperature largely depends on the deflection level for both NiTi and CuNiTi. (4) Conclusions: The plateau force levels at 37°C, broadly reported in the literature, only represent the lower boundary force that a superelastic wire releases at 37°C above its elastic limit. For both NiTi and CuNiTi, plateau force levels at 37°C can be predicted by the static TMA profile matching the end point of the force plateau extension. Transition temperatures in largely deflected wires are significantly higher than those determined through the calorimetric approach.

The classification of goods involved in international trade in Brazil is based on the Mercosur Common Nomenclature (NCM). The classification of these goods represents a real challenge due to the complexity involved in assigning the correct category codes especially considering the legal and fiscal implications of misclassification. This work focuses on the training of a classifier based on Bidirectional En-coder Representations from Transformers (BERT) for the tax classification of goods with NCM codes. In particular, this article presents results from using a specific Portuguese Language tuned BERT model as well results from using a Multilingual BERT. Experimental results justify the use of these models in the classification process and also that the language specific model has a slightly better performance.

In recent years, the interest in increasingly sustainable agriculture has also turned attention towards new crops which could enter the food chain as new protein and oil sources or that can be used as new cover crops. In this scenario, Camelina sativa is a perfect crop to study. Camelina is an annual herbaceous plant belonging to the Brassicaceae which is interesting for its oil content, since the seeds contain about 40% of oils, with a high level of polyunsaturated fatty acids (30-40% alpha linolenic acid, 15-25 % linoleic acid, 15% oleic acid and about 15% eicosenoic acid). It is a hexaploid species (2n = 40, genome size ~782 Mb) characterized by rapid growth, short life cycle (85-100 days for spring varieties, 190-210 for autumn varieties) and low input cultivation needs. All these traits make it suitable for use in marginal areas. However, its use in feed and food is limited by the presence of glucosinolates (GLS). GLS are sulfur molecules involved in plant defense. In recent years, they have been studied not only as anti-nutritionals, but also for their anti-carcinogenic effects against chronic inflammatory and heart diseases and for their use as natural pesticides. Given the recent interest in camelina and its highly nutritious oil, eight pure lines and a synthetic population were compared in two different growing periods, spring and winter. In this work, the genetic materials were characterized for different phenotypic traits, yields and yield components, bromatological and glucosinolate content. The results confirmed that in North Italy camelina has higher yields if cultivated in the autumn-winter period (about 2 t/ha vs 0.6 t/ha), furthermore, a negative correlation was found between spring and winter yields, indicating that varieties that produce more in winter cultivation produce less in spring cultivation. Moreover, to our knowledge, it is the first work in which a synthetic population of Camelina sativa has been tested and proved to be a valid solution for use in various environments both for its adaptability and for the low content of glucosinolates (about 17 mmol/ kg).

Currently, metal nanoparticles have varied uses for different medical, pharmaceutical, and agricultural applications. Nano-biotechnology combined with green chemistry has great potential for the development of novel and necessary products that benefit human activities, while encourages the reduction of hazardous reagents for nanoparticle production. Green chemistry has an important role due to its contribution to unconventional synthesis methods of gold and silver nanoparticles from plant extracts, which have exhibited antimicrobial potential among other outstanding properties. Biodiversity-rich countries need to collect and convert knowledge from biological resources into processes, compounds, methods, and tools, which need to be achieved along with sustainable use and exploitation of biological diversity. Therefore, this review focuses on the importance of metal nanoparticles, the use of plant extract for their synthesis as well as other available methods, and the relevant antimicrobial activity that can be exploited in a sustainable model of agricultural management through a modern nanotechnological approach.

Brazil is the world leader in pesticide consumption, and its indiscriminate use puts farmers’ health at risk. The CYP2C9 gene stands out for encoding the CYP2C9 enzyme, which metabolizes several endogenous substrates and specific xenobiotics, especially pesticides. Our goal is to study the risk of pesticide use, espe-cially the herbicide glyphosate, in the development of diseases and the association with two CYP2C9 poly-morphisms, in farmers living in the southern region of Espírito Santo state, Brazil. The allelic frequency of CYP2C9*1, CYP2C9*2 and CYP2C9*3 was determined in blood samples from individuals exposed or not to pesticides using real-time PCR. 304 blood samples were analyzed, dividing CYP2C9 genotypes into three metabolization classes: normal, intermediate, and slow. Our results show that normal metabolizers are more vulnerable to diseases such as blood pressure changes and cardiovascular and kidney problems, while in-termediate metabolizers show an association with attention deficit disorder and miscarriages, suggesting that farmers in the studied region developed symptoms correlated to the CYP2C9 genotype they have. This work is pioneering in associating specific genetic variations and health risks with pesticide exposure, em-phasizing the importance of personalized medicine and stricter regulation of pesticide use for public health and occupational safety.

The electronic structure of 7/9-AGNR superlattices with up to eight unit cells has been studied by means of state of the art Density Functional Theory (DFT) and also by two model Hamiltonians, the first one including only local interactions (Hubbard model, Hu) while the second one is extended to allow long-range Coulomb interactions (Pariser, Parr and Pople model, PPP). Both are solved within mean field approximation. At this approximation level, our calculations show that 7/9 interfaces are better described by spin non-polarized solutions than by spin-polarized wavefunctions. Consequently, both Hu and PPP Hamiltonians lead to electronic structures characterized by a gap at the Fermi level that diminishes as the size of the system increases. DFT results show similar trends although a detailed analysis of the density of states around the Fermi level shows quantitative differences with both Hu and PPP models. Before improving model Hamiltonians, we interpret the electronic structure obtained by DFT in terms of bands of topological states: topological states localized at the system edges and extended bulk topological states which interact between them due to the long-range Coulomb terms of Hamiltonian. After careful analysis of the interaction among topological sates, we find that the discrepancy between ab initio and model Hamiltonians can be resolved considering a screened long-range interaction that is implemented adding an exponential cutoff to the interaction term of PPP model. In this way, an adjusted cutoff distance λ = 2 allows a good recovery of DFT results. In view of this, we conclude that the correct description of the density of states around the Fermi level (Dirac point) needs the inclusion of long-range interactions well beyond Hubbard model but not completely unscreened as is the case for the PPP model.

There are increasing calls in education for deeper integration of disciplines and better preparation for the personal and job challenges of a fast-changing and smarter society. Thus, we need to search for new effective didactic strategies. However, current classrooms are isolated. They practically never connect. This hinders the exchange of ideas. It inhibits imitation and recombination, the basic blocks of cultural evolution and innovation. In this paper, we analyze online inter-class tournaments. These are lessons where entire elementary or middle school classes interconnect synchronously and play an educational game. These are new types of academic activities, and only possible thanks to digital communication technology. In this paper, we examine four online tournaments, we analyze how feasible it is to carry them out and the benefits they bring. One tournament is for teaching machine learning and statistics. The second one teaches the conservation of momentum in physics and an engineering optimization challenge. The third tournament is for learning to solve word problems. The fourth one is for teaching natural and sexual selection along with developing statistical and population thinking. We found that these inter-class tournaments are feasible to implement in schools and that they are a promising mechanism to facilitate imitation, recombination, and innovation of teaching strategies.

Bactrocera dorsalis Hendel is a highly invasive horticultural pest of major economic importance worldwide. In Burkina Faso, it is one of the main insect pests constraining the mango production and export. Understanding the biology and the genetic dynamics of this insect pest provide cru-cial information for the development of effective control measures. The aim of this study was to understand the distribution, diversity and genetic structure of B. dorsalis in Burkina Faso. Male flies were collected transversally in Burkina Faso and analyzed by PCR using 10 microsatellite markers. The results showed an abundance of B. dorsalis varying from 87 to 2986 flies per trap per day in the different sampling sites. Genetic diversity was high in all sites with an average Shan-non's Information Index (I) of 0.72 per site. Gene flow was high between study populations and ranged from 10.62 to 27.53 number of migrants. Bayesian admixture analysis showed no evi-dence of structure while Discriminant Analysis of Principal Components identified three weakly separated clusters in the population of B. dorsalis in Burkina Faso. The results of this study could be used to optimize the effectiveness of current control interventions and to guide the imple-mentation of new, innovative and sustainable strategies.

The extensive metabolic diversity of microalgae, coupled with their rapid growth rates and cost-effective production, position these organisms as highly promising resources for a wide range of biotechnological applications. These characteristics allow microalgae to address crucial needs in both the agricultural, medical, and industrial sectors. Microalgae are proving to be val-uable in various fields, including the remediation of diverse wastewater types, the production of biofuels and biofertilizers, and the extraction of various products from their biomass. For decades, the microalga Chlamydomonas has been widely used as a fundamental research model organism in various areas such as photosynthesis, respiration, sulfur and phosphorus metabolism, nitrogen metabolism, and flagella synthesis, among others. However, in recent years, the potential of Chlamydomonas as a biotechnological tool for bioremediation, biofertilization, biomass, and bio-products production has been increasingly recognized. Bioremediation of wastewater using Chlamydomonas presents significant potential for sustainable reduction of contaminants and fa-cilitates resource recovery and valorization of microalgal biomass, offering important economic benefits. Chlamydomonas has also established itself as a platform for the production of a wide va-riety of biotechnologically interesting products, such as different types of biofuels, and high-value-added products. The aim of this review is to achieve a comprehensive understanding of the potential of Chlamydomonas in these aspects, and to explore their interrelationship, which would offer significant environmental and biotechnological advantages.

The potential of biological consortia designed for laccase production and dye treatment is discussed in this review. The poor yields in laccase production and low efficiency in dye decolorization of monoculture-based treatments has encouraged the use of designed biological consortia. A consortium is a system where the growth of two or more organisms, chosen to improve a particular bioprocess, is induced in the same medium. Chemical and natural mediators are being replaced by consortia for the production of laccases because, in addition to being less toxic, they induce new enzyme isoforms and lead to high laccase yields. On the other hand, consortia act synergistically in the decolorization of azo dyes through the enzymes they produce, so overall degradation is improved. Designed consortia are an attractive alternative still in development that could provide new biotechnological tools for the treatment of textile effluents.

Background: Inflammatory bowel diseases (IBD) present chronic inflammatory challenges marked by increased oxidative stress. This study assessed the collective impact of Curcumin plus piperine on oxidative stress and inflammation biomarkers in mild to moderate IBD patients. Methods Patients diagnosed with CD or UC, aged ≥18 years with preserved kidney and liver functions, were randomized into three groups: placebo, Curcumin (1000 mg/day), and Curcumin plus piperine (1000 mg + 10 mg/day) for 12 weeks. Blood and fecal samples were collected to analyze oxidative stress and inflammatory markers, before and after the intervention period. Results: Curcumin plus piperine group had significantly higher serum SOD compared to the placebo group, after adjusting for sex, age, and type of IBD (4346.9 ± 879.0 vs 3614.5 ± 731.5; p=0.041). There were no significant differences in the other oxidative stress or inflammatory markers between groups. Conclusions: This study suggests that 12 weeks of Curcumin plus piperine supplementation effectively enhances the enzymatic antioxidant defense, particularly SOD, in IBD patients. These findings hold promise for managing redox imbalance in individuals with IBD, highlighting potential therapeutic benefits.

During the last years there has been a high interest in the development of new purely-organic single-component conductors. Very recently, we have reported a new neutral radical conductor based on the perchlorotriphenylmethyl (PTM) radical moiety linked to a monopyrrolo-tetrathiafulvalene (MPTTF) unit by a -conjugated bridge (1). Interestingly, this system behaves as a semiconductor with high conductivity and small energy gap under high pressure. With the aim of developing a new material with improved conducting properties, we have designed and synthesized the radical dyad 2 which was functionalized with an ethylenedithio (EDT) group in order to improve the intermolecular interactions of the TTF subunits. The physical properties of the new radical dyad 2 were studied in detail in solution to further analyze its electronic structure as well as its potential use as radical conductor in the solid state.

By defining a constant probabilistic orbit of and iterated functions, the stability dynamics of these functions in possible interactions through connectivity provides the formation of a dynamic fixed point as a metric space between both iterated functions. The presence of a dynamic fixed point identifies qualitatively phases of iteration time lengths and interaction orbits of the event. Qualitative results show that the greater the average distance from one of the functions to the fixed point of the other (all possible solutions), the higher the iteration expression on time (false asymptotic effect) of one of the functions and in the opposite hand, the lower the average distance, the higher orbit’s interactions proximity between iterated functions (stability). This feature reveals asymptotic (well-defined) behavior between functions f and g within a well-defined Lyapunov stability.

The chestnut tree (Castanea sativa Mill.) is gaining importance in the mountainous regions of southern Europe due to the high value of its fruits. It is essential to establish effective cultivation protocols, considering that this species is still relatively understudied. In this study, we present the outcomes of the initial establishment of a chestnut orchard conducted through a nutrient omission trial for four years. The treatments included a fertilization plan with nitrogen, phosphorus, potassium, and boron (NPKB), the control, and four other treatments corresponding to the omission of each nutrient (-NPKB, N-PKB, NP-KB, NPK-B). The -NPKB and NP-KB treatments showed significantly lower trunk circumferences and canopy volumes compared to the other treatments. The NPK-B treatment resulted in the lowest fruit production, with a total accumulated yield (2020-2022) of 0.56 kg tree–1, a value significantly lower than that of NPKB (1.12 kg tree–1) and N-PKB (1.19 kg tree–1). The assessment of nutrient concentrations in the leaves revealed plants with deficient levels of B and K in treatments that did not receive these nutrients. Conversely, N levels in the leaves in the -NPKB treatment fell within the sufficiency range (20 to 28 g kg–1). This suggests that the sufficiency range should be adjusted to higher values, given the treatment's effect on tree growth. It was also observed that the -NPKB treatment led to lower soil organic matter compared to the other treatments, likely due to reduced herbaceous vegetation development under the canopy, leading to decreased organic substrate deposition in the soil. The main findings of this study are that N and K were crucial elements for the optimal growth of chestnut trees, while B played a significant role in fruit production.

The cause of the systematic daily march of barometric pressure in the tropics, notably the late morning and late evening peaks seen almost every day at all locations, was a puzzle that persisted through the nineteenth and much of the twentieth centuries. The efforts to explain the physics of the prominent 12-hour solar tidal variation helped inspire some of the earliest developments in theoretical atmospheric dynamics and ultimately led in the 1960’s to a satisfactory dynamical theory for the atmospheric tides. These important theoretical developments followed the observational discoveries, which date to the late 18th and early 19th centuries, of the surprising character of the barometric daily march and of its resolution into solar and lunar period cycles. These important, if simple, discoveries emerged primarily from the efforts of European scientists to systematically study the environment in remote areas of the globe. The two key figures in initially advancing the scientific community’s understanding of the character of barometric tides were the great German polymath Alexander von Humboldt (1769-1859) and the French naturalist Robert de Lamanon (1752-1787), who each made their discoveries on their most famous and colorful scientific expeditions of their respective careers. This paper examines the history of the early observations of the barometric tide.

This study introduces an efficient strategy for synthesizing polyhydroxyurethane-based multicomponent hydrogels with enhanced rheological properties. In a single-step process, 3D materials composed of Polymer 1 (PHU) and Polymer 2 (PVA or gelatin) were produced. Polymer 1, a crosslinked polyhydroxyurethane (PHU) grew within a colloidal suspension of Polymer 2, forming an interconnected network. The synthesis of Polymer 1 utilized a Non-Isocyanate Polyurethane (NIPU) methodology based on the aminolysis of bis(cyclic carbonate) (bisCC) monomers derived from 1-thioglycerol and 1,2-dithioglycerol (monomers MA and ME, respectively). This method, applied for the first time in Semi Interpenetrating Network (SIPN) formation, demonstrated exceptional orthogonality, since the functional groups in Polymer 2 do not interfere with Polymer 1 formation. Optimizing PHU formation involved a twenty-trial methodology, identifying influential variables such as polymer concentration, temperature, solvent (an aprotic and a protic solvent), and the organo-catalyst used [a thiourea derivative (TU) and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU)]. The highest molecular weights were achieved under near-bulk polymerization conditions using TU-protic and DBU-aprotic as catalyst-solvent combinations. ME-based PHU exhibited higher (M_w ) ̅ than MA-based PHU (34,100 Da and 16,400 Da, respectively). Applying the enhanced methodology to prepare ten multicomponent hydrogels using PVA or gelatin as the polymer scaffold revealed superior rheological properties in PVA-based hydrogels, exhibiting solid-like gel behavior. Incorporating ME enhanced mechanical properties and elasticity (with loss tangent values of 0.09 and 0.14). SEM images unveiled distinct microstructures, including a sponge-like pattern in certain PVA-based hydrogels when MA was chosen, indicating the formation of highly superporous interpenetrated materials. In summary, this innovative approach presents a versatile methodology for obtaining advanced hydrogel-based systems with potential applications in various biomedical fields.

The self-assembly is an intriguing process of great importance in general soft matter and thus re-ceives an ever-growing scientific interest. Its most trivial example is the entropy-driven crystalli-zation of hard spheres. Past works have established the similarities and differences in the phase behavior of monomers and chains made of hard spheres. In the present work, inspired by the dif-ference in the melting points of the pure components, we study, through Monte Carlo simulations, the phase behavior of athermal mixtures composed of fully flexible polymers and individual monomers of uniform size. We analyze how the relative number fraction and the packing density affect crystallization and the established ordered morphologies. A synergetic effect is observed in the crystallization leading to synchronous crystallization of the two species. Structural analysis of the resulting ordered morphologies shows perfect mixing and thus no phase separation, which could split the system into polymer-rich and monomer-rich domains. Due to the constraints imposed by chain connectivity, the local environment of the individual spheres is systematically more spherical and more symmetric compared to the one of spheres belonging to chains. In general, increasing polymer content leads to reduction of the degree of crystallinity. According to the present findings, relative concentration is another determining factor to control the phase behavior of hard colloidal systems based on polymers.

Abstract: The aim of the present study was to identify the age and sex-related associations between marital status with PA and TV time. We used data from Vigitel, an annual telephone survey started in 2006 in Brazil. We applied a complex sample logistic regression model to estimate the odds for PA and TV time comparing marital statuses according to age and sex subgroups, independent of obesity, hypertension, diabetes, self-assessed poor health, and smoking. Our sample included 561,837 individuals with a TV time > 3 h/day (prevalence = 25.2%) and PA > 150 min/week (prevalence = 35%). Compared to single individuals, married men and women were less likely to watch TV more than 3 h/day in participants > 30 years old. When compared to single, married participants were less likely to do more than 150 min of PA/week at younger age groups. Married women older than 40 years were more likely to do more than 150 min of PA/week than the single ones, while there were no differences among married men by age group. In conclusion, married individuals are less likely to spend more than 3 hours a day watching TV than single individuals. Single men and women were more likely to do more than 150 min of PA/week at younger age groups and married women older than 40 years were more likely to do 150 min of PA/week than single women.

Experimental evidence showed how various complex systems, characterized by a fluctuation scaling, satisfy the well-known Taylor's law. The present work aims to apply for the first time Taylor's law, given its general treatment, for a flow field at $Re$ around $10^4$, since activity of each fluid particle is highly fluctuating, especially in the context of vortex shedding. In addition, the further element of innovation is the use of an innovative thin-films based device consisting of an elastic piezoelectric flapping flag that is proposed as a measuring instrument of the flow field. The oscillations of the flapping flag, due to the vortexes release downstream to an obstacle of cylindrical shape, generate an alternating piezoelectric voltage whose time history is similar to the chaotic components of the fully developed turbulent speed. Preliminary experimental results about the use of thin-films based device in a flume channel are reported together with a second order analysis on the voltage difference and a scaling law of the exponent scale.

The revolutionary idea of complementary intelligence involves a unique strategy in which artificial intelligence (AI) works with human cognitive abilities embodied by natural intelligence (NI), creating a harmonious partnership instead of engaging in a competitive relationship. This innovative concept can potentially revolutionize how we approach scientific research and discovery. This cutting-edge process capitalizes on pooling the vast information from various distinct and autonomous sources to generate forecasts that frequently outshine human perspectives by significant margins, leading to groundbreaking advancements in scientific development based on hybrid intelligence. Multilayer networks extend traditional network theory to adjacent layers linked through copula nodes. Artificial intelligence, with its retrieval capacity to collect and interpret big data, sharply increases the number of nodes and their linking interpretation. This process, amplified by multilayer networks, dramatically improves the scalability of the networked ecosystem. Multilayer networks can represent NI and AI in complementary hyperplanes, connecting them with copula nodes and edge properties. Thus, it is possible to measure the interaction of NI and AI, assessing their scalable value co-creation properties. This study examines the interaction of NI and AI with an innovative and multidisciplinary approach. A theoretical framework of these related concepts precedes practical insights for possible applications in future research.

Ménière's disease (MD) has an unclear cause. The microvascular dysregulation of the inner ear has been increasingly pointed as a potential contributor. This study investigates the prevalence of cardiovascular risk factors (CVRFs) in MD patients compared to those with posterior circulation cerebral infarction (POCI). CVRFs like hypertension, diabetes, dyslipidemia, obesity, coronary heart disease, and smoking were assessed in both MD and POCI patients. Brain MRI identified POCI etiology as "small vessel occlusion" (SVO) or "other etiology" (OE). The study included 64 MD and 84 POCI patients. Compared to MD, POCI OE showed a higher prevalence of CVRFs across various age groups, including hypertension, diabetes, dyslipidemia, and smoking. Notably, the odds of having POCI OE were significantly higher for individuals with hypertension and smoking. On the other hand, POCI SVO showed similar prevalence of CVRFs compared to MD. This study reveals no significant difference in CVRF prevalence between MD and smaller vessel POCI. However, a clear distinction emerges when comparing MD to POCI with involvement of larger blood vessels. Further research is needed to confirm these findings and explore potential shared risk factors between POCI (SVO) and MD.

Objective: To analyse the association between maternal risk factors such as age, body mass index (BMI) and cigarette smoking, with perinatal outcomes. Materials and Methods: This a retrospective analysis from prospectively collected data performed at Hospital Universitario de Torrejón (Madrid, Spain), between September 2017 and December 2019. All pregnant women with singleton pregnancies and non-malformed live fetuses attending their routine ultrasound examination at 11+0 to 13+6 weeks' gestation were invited to participate. Association between preeclampsia, preterm birth, gestational diabetes mellitus (GDM), small for gestational age (SGA) or fetal growth restricted (FGR) neonates and type of delivery according to maternal age, BMI, and cigarrete smoking was studied. Logistic mixed models were used to analyze the data. Results: 1921 patients were included in the analysis. Women of 40 years old had a significantly higher risk of having GDM (Odds Ratio (OR) 1.61, 95% Confidence Interval (CI) 1.08 to 2.36), and SGA neonates (OR 1.54, 95% CI 1.00 to 2.37). Women with a BMI <18 had an increased rate of birth SGA and FGR neonates (OR 3.28, 95% CI 1.51 to 7.05, and OR 3.73, 95% CI 1.54 to 8.37, respectively), whereas women with a BMI ≥35 had a higher risk of GDM (OR 3.10, 95% CI 1.95 to 4.89). Smoking increased the risk of having SGA and FGR neonates (OR 1.83, 95% CI 1.36 to 2.46, and OR 1.91, 95% CI 1.29 to 2.78). Conclusions: Advanced maternal age, low or high BMI, and smoking status are significant risk factors for pregnancy complications. Both clinicians and society should concentrate their efforts on addressing these factors to enhance reproductive health.

The high protein content of several microalgal species makes them attractive and unconventional for applications in the food and pharmaceutical industries. Due to microalgae's robust cell wall, cell rupture is necessary to improve the extraction of their intracellular proteins. Thus, choosing a suitable cell-breaking treatment before protein extraction is a vital downstream processing step. Additionally, it is necessary to use an effective technique for monitoring and measuring the impact of rupture treatments on microalgal cell walls. In our study, Tetradesmus obliquus cells were disrupted by three different mechanical rupture methods: high-pressure homogenization (HPH), ultrasound (US), and ball milling (BM). The ruptured biomass cells were counted, and soluble proteins were extracted and quantified. The cell counting technique did not detect differences between intact and damaged cells after BM treatment because the dye (erythrosine B) did not permeate the microalgae biomass accurately. The US treatment promoted the highest yield of total protein extraction (19.95%). The yields of protein extraction of T. obliquus with HPH (15.68%) and BM (14.11%) were significantly (p value ≤ 0.05) lower than that achieved in the US treatment. The increase in the number of extraction steps increased the protein recovery. Thus, the content of extracted soluble protein was a reliable indirect index for a quantitative comparison of the cell disruption level.

The main purpose of this paper is to present a system to detect extrusion failures in Fused Deposition Modelling (FDM) 3D printers by sensing that the filament is moving forward properly. After several years using these kind of machines, authors detected that there is not any system to detect the main problem in FDM machines. Authors thought in different sensors and used the Weighted Objectives Method, one of the most common evaluation methods, for comparing design concepts based on an overall value per design concept. Taking into account the obtained scores of each specification, the best choice for this work is the optical encoder. Once the sensor is chosen, it is necessary to design de part where it will be installed without interfering with the normal function of the machine. To do it, photogrammetry scanning methodology was employed. The developed device perfectly detects the advance of the filament without affecting the normal operation of the machine. Also, it is achieved the primary objective of the system, avoiding loss of material, energy and mechanical wear, keeping the premise of making a low-cost product that does not significantly increase the cost of the machine. This development has made it possible to use the printer with remains coil filament, which were not spent because they were not sufficient to complete an impression and also printing models in two colours with only one extruder.