Gallbladder diseases are very common and their diagnosis is based on clinical-laboratory evaluation and imaging techniques. Considering the different imaging diagnostic tools, ultrasound (US) has the advantage of high accuracy combined with easy availability. Therefore, when a gallbladder disease is suspected, US can readily assist the clinician in the medical office or in the emergency department. The high performance of US in the diagnosis of gallbladder diseases is mainly related to its anatomic location. The most frequent gallbladder pathological condition is gallstones disease, easily diagnosed by US examination. Acute cholecystitis (AC), a possible complication of gallstone disease, can be readily recognized, due to its specific sonographic features. Additionally, a number of benign, borderline or malignant gallbladder lesions may be detected by US evaluation. The combined use of standard B-mode US and additional sonographic techniques, such as contrast-enhanced ultrasonography (CEUS), may provide a more detailed study of gallbladder lesions. Multiparametric US (combination of multiple sonographic tools) can improve the diagnostic yield during gallbladder examination.

SPME analysis of the scent Ophrys orchids gave the following results: O. apifera: benzyl benzoate, -copaene, caryophyllene, and cyclosativene. O. crabronifera subsp. biscutella: pentadecene, pentadecane, heptadecane, nonadecane, and heinecosane. O. bertolonii subsp. bertolonii: pentadecane, heptadecane and nonadecane. O. passionis subsp. garganica: i-propyl palmitate, caryophyllene, pentadecane, and heptadecane. O. holosericea subsp. apulica: -copaene, pentadecane, caryophyllene, and heptadecane. O. lacaitae: -copaene, pentadecane, heptadecane, and caryophyllene. O. bombyliflora: cyclosativene, pentadecane, and ethyl dodecanoate. O. insectifera: 8-heptadecene, pentadecane, and heptadecane. O. lutea: heptadecane, 8-heptadecene, nonadecane, and docosane. O. tenthredinifera subsp. neglecta: -copaene, caryophyllene, and i-propyl palmitate.

Mitochondrial dysfunction is relevant mechanism in cardiac aging. Here, we investigated the effects of late-life enalapril administration at non-antihypertensive dose on mitochondrial genomic stability, oxidative damage, and mitochondrial quality control (MQC) signaling in the heart of aged rats. The protein expression of selected mediators (i.e., mitochondrial antioxidant enzymes, energy metabolism, mitochondrial biogenesis, dynamics, and autophagy) was measured in old rats randomly assigned to receive enalapril (n=8) or placebo (n=8) from 24 to 27 months of age. We also assessed mitochondrial DNA (mtDNA) content, citrate synthase activity, oxidative lesions to protein and mtDNA (i.e., carbonyls and abundance of mtDNA4834 deletion), and mitochondrial transcription factor A (TFAM) binding to specific mtDNA regions. Enalapril attenuated cardiac hypertrophy and oxidative stress-derived damage (mtDNA oxidation, mtDNA4834 deletion, and protein carbonylation), while increasing mitochondrial antioxidant defenses. TFAM binding to mtDNA regions involved in replication and deletion generation was increased following enalapril administration. Increased mitochondrial mass as well as mitochondriogenesis and autophagy signaling was found in enalapril-treated rats. Late-life enalapril administration mitigates age-dependent cardiac hypertrophy and oxidative damage, while increasing mitochondrial mass and modulating MQC signaling. Further analyses are needed to conclusively establish whether enalapril may offer cardioprotection during aging.

Abstract: Presence in a recipient of antibodies directed against donor specific antigens represent a major obstacle in transplanting such patients. Removal of these antibodies represents a challenge for physicians dealing with kidney transplantation. Several strategies, techniques and old and new drugs are to date used to desensitize these patients. Desensitization may occur before transplantation or at the time of transplantation or after transplantation according whether physicians deal with living or deceased donors. Different techniques may be used to reveal the presence of antibodies in the recipients; each technique has different sensitivity and specificity, different advantages and disadvantages. The target of the drugs used to desensitize are B cells, Plasma cells, the antibodies themselves and finally, the complement that is the final actor causing tissue disruption. If B cells are relatively easy to be targeted, more difficult are the plasma cell. Indeed, several new drugs are used in randomized trials also to defeat plasma cells. Antibodies may be removed rather easily, but often their removal is followed by a rebound. Complement is not easy to be defeated and new drugs are to date used to be successful in this action. However is to date possible to desensitize many patients and to obtain successful transplantation.

Abstract Kidney transplant recipients, because of a weak immune response due to the assumption of immunosuppressant are exposed to the risk of COVID-19 infection. This fact realize the problem on how to treat the severe infection without carrying the risk of acute rejection due to the reduction of the immunosuppressive drugs. The best are the prophylactic measures to be taken before transplantation as vaccination. If the patient is already transplanted, three measures may be undertaken: Vaccination, use of monoclonal antibodies, use of therapeutic antiviral small molecules. Concerning vaccination is still debated which one is the best and how many doses should be given. The surge of new virus variant is the major problem and invites to find new active vaccines. In addition, not all the transplanted patients develop antibodies. The other measure is the use of monoclonal antibodies. They may be used as prophylaxis or in the early stage of the disease. Finally, the antiviral small molecules may be used again as prophylaxis or treatment. Their major drawback are the interference with the immunosuppressive drugs and the fact that some of them cannot be administered to patients with low eGFR.

Extremely sensitive food-allergic patients may react to very small amounts of allergenic foods. Precautionary allergen labelling (PAL) warns from possible allergenic contaminations. We explored the ability of proteomic methods to identify minute amounts of milk/egg allergens in a brand of PAL-labelled milk- and egg-free biscuits. We evaluated the reactivity of children with severe milk and egg allergy, by oral food challenge. Traces of milk and/or egg allergens in biscuits were measured by two different liquid-chromatography-mass spectrometry methods. The binding of patient's serum with egg/milk proteins was assessed at immunoblotting. None of the patients reacted to biscuits. Egg and milk proteins were found under the limit of detection of 0.6 µg/g for milk and egg (method A), and of 0.1 and 0.3 µg /g for milk and egg, respectively (method B). The immunoblots did not show milk/egg proteins in the studied biscuits. Our biscuits did not contain allergens of clinical significance. Their milk/egg content is far lower than 4 µg of milk or egg protein per gram of product, the minimal doses considered theoretically capable of causing reactions. With high sensitivity, proteomic assessments predict the harmlessness of very small amount of allergenic foods and can be used to avoid unnecessary PAL.

The paper will analyze the pressures and vulnerabilities of the consolidated city from two perspectives: technical and social. Some design and pragmatic experiences conducted by the author in his teaching and research experience first at the Department of Urbanism of TUDelft in the Netherlands and currently at the PDTA Department of La Sapienza University of Rome will be introduced and analyzed. In the first research activity, whose case study is Rotterdam, all urban vulnerabilities related to climate change will be analyzed while in the second one, conducted in Viterbo, the vulnerability related to the hull of social inclusion, poor accessibility and psycho-social stress that plague our established cities will be treated. The two areas of study, different in size and spatial governance tools, are comparable because they allow deciphering the city's risks through lines of intervention that could serve as best practices and serve the urban planning disciplinary update also allowing to define a reflection on morphology and fabrics and on the shape of the city itself. Both teaching and research activities in which the author is involved allow the topic of urban vulnerability to be addressed with a broad exploratory scope that, in the final stage, hypothesizes design intervention on the neighborhood scale, identified as the most appropriate to provide plausible climate and social adaptation and mitigation responses.

Recently, many independent research project focus on the study of the molecular basis of aging processes. I parallel, the different progression of many diseaes between sex is a hot topic research area. These studies require many data, models and tools for inferring aging and sex specific molecular machinaries. Among the others, the Genotype-Tissue Expression (GTEx) database is one of the preminent resources for the analysis of expression data related to tissues, sex and age. The current version of the database has a lot of querying interface that enable many analysis centered on the expression of genes on tissues. Despite this the database lacks on the analysis at sex/age level, thus the researcher has to download data and then write queries by hand. Nevertheless it lacks on the integration with existing protein interaction data. Therefore, the need for the introduction of tools enabling easy access and powerful analysis capabilities (i.e. state of the art network based analysis and integration), arises. We here present NOMA-DB a framework for the analysis of age related genes based on the GTEx database that enable easy querying at sex/age level, network based analysis. The framework is based on wrapping the GTEx database and on building an application logic level on top of existing data. The current version enables the analysis of genes by tissue, gene and age, thus it may be used in potentially future directions of analysis towards better comprehension of aging/sex-related molecular machineries based on the analysis of expression dat

The specialisation and intensification in agriculture have increased the productivity but have also led to the spread of monocultural systems, simplifying production and reducing genetic diversity. The purpose of this study was to propose crop diversification as a tool to increase biodiversity and achieve sustainable and resilient intensive agriculture, particularly in areas with water scarcity. In this paper, a combined Life Cycle Assessment (LCA) and Life Cycle Costing (LCC) was applied to evaluate the environmental and economic sustainability of a differentiated system of cultivation (pomegranate, almond and olive), according to modern intensive and superintensive cropping systems. Based upon the results obtained, it is deduced that pomegranate cultivation generated the highest environmental load, followed by almond and olive. From the financial analysis, it emerged that almond is the most profitable, followed by pomegranate and olive.

Barbera d'Asti - including Barbera d'Asti superiore - and Nizza are two DOCG (Denominazione di Origine Controllata e Garantita) wines produced in Piemonte (Italy) from Barbera grape variety. Differences among them arise in the production specifications in terms of purity, ageing and zone of production, in particular with concern to Nizza, which has more stringent rules and can therefore be considered as the one with the highest market value, with even three-fold more average prices. To guarantee producers and consumers, authentication methods must be developed in order to distinguish among the different wines. As the production zones totally overlap, it is important to verify whether the distinction is possible or not according to metals content, or whether chemical markers more linked to winemaking are needed. In this work, Inductively Coupled Plasma (ICP) elemental analysis and multivariate data analysis are used to study the authentication and traceability of samples from the three designations of 2015 vintage. The results show that, as far as elemental distribution in wine is concerned, work in the cellar, rather than geographic provenance, is crucial for the possibility of distinction.

In recent years graphene has attracted much interest due to its unique properties of flexibility, strong light-matter interaction, high carrier mobility and broadband absorption. In addition, graphene can be deposited on many substrates including silicon with which is able to form Schottky junctions opening the path to the realization of near-infrared silicon photodetectors based on the internal photoemission effect where graphene play the role of the metal. In this work, we review the very recent progress of the near-infrared photodetectors based on Schottky junctions involving graphene. This new family of device promises to overcome the limitations of the Schottky photodetectors based on metals showing the potentialities to compare favorably with germanium photodetectors currently employed in silicon photonics.

Psychosis can be defined as a combination of psychopathological symptoms including delusions and/or hallucinations without insight. Psychotic disorders may configure a primary psychiatric illness or represent the result of a functional/structural brain damage induced by substance use, neurological diseases or other medical conditions. They are multifactorial disorders in which genetic, environmental and gene-environment interaction factors contribute to the expressiveness of the symptoms. Among the environmental factors, psychotropic substances represent the most important removable facilitators of psychosis. In our study, we compared the prevalence of substance induced psychosis between a sample of patients affected by cannabis use disorder and a sample of patients affected by cocaine use disorder analyzing retrospectively the data of outpatients with no personal or family history of psychiatric illnesses.

The amino acid proline accumulates in plants during abiotic stresses such as drought and salinity and is considered a reliable marker of environmental stress. While its accumulation is well established, its precise role in stress tolerance and its underlying molecular mechanism remain less clear. To address these issues, we performed a meta-analysis - a robust statistical technique that synthesizes results from multiple independent studies while accounting for experimental differences. We focused on 16 physiological and morphological parameters affected by drought and salt stress in transgenic plants expressing proline metabolic genes. For each parameter, we calculated the effect size as the response ratio (RR), which represents the logarithm of the mean value in the transgenic group over the mean value of the control group (lnRR). Under stress, most parameters exhibited significantly higher response ratios in the transgenic group, confirming the beneficial effects of proline during drought and salt stress. Surprisingly, under non-stressed conditions, most stress markers showed no significant differences between transgenic and non-transgenic plants, despite elevated proline levels in the former. These results suggest that the benefits of proline may be related to proline catabolism or may only become apparent during stress, possibly due to interactions with reactive oxygen species (ROS), which accumulate predominantly under stress conditions.

This study investigates the impact of experienced contact on prejudiced attitudes toward individuals with intellectual disabilities (ID), examining beliefs in a just world (BJW) and social dominance orientation (SDO) as potential serial mediators. Data were collected from 224 university students (M = 23.02, SD = 2.48). Path analysis modeling assessed the structural relationships between the study variables. The findings revealed that experienced contact was negatively and significantly associated with BJW and SDO. Additionally, BJW and SDO fully mediated the relationship between experienced contact and overt prejudice. These findings underscore the influence of individual differences on attitudes toward individuals with ID, establishing a crucial foundation for future research and the development of interventions aimed at reducing prejudice and discrimination.

Exposure to bisphenol analogues can occur in several ways throughout the food production chain with their presence at higher concentrations representing a risk to human health. This study aimed to develop effective analytical methods to simultaneously quantify BPA and fifteen bisphenol analogues (i.e., bisphenol AF, bisphenol AP, bisphenol B, bisphenol BP, bisphenol C, bisphenol E, bisphenol F, bisphenol G, bisphenol M, bisphenol P, bisphenol PH, bisphenol S, bisphenol Z, bisphenol TMC and tetramethyl bisphenol F) present in canned foods and beverages. Samples of foods and beverages available in the Swiss and EU markets (n = 22) including canned pineapples, ravioli and beer were prepared and analyzed using QuEChERS GC-MS. The quantification method was compared to a QuEChERS LC-MS/MS analysis. This allowed for the selective and efficient quantitative simultaneous analysis of bisphenol analogues. Quantities of these analogues were present in 20 of the 22 samples tested with the most frequent analytes at higher concentrations; BPA and BPS being discovered in 78% and 48% of cases respectively. The study demonstrates the robustness of QuEChERS GC-MS for determining low quantities of bisphenol analogues in canned foods. However, further studies are necessary to achieve full knowledge of the extent of bisphenol contamination in the food production chain and its associated toxicity.

In microwave imaging it is often of interest to inspect electrically large spatial regions. In these cases, data must be collected over a great deal of measurement points which entails long measurement time and/or costly, and often unfeasible, measurement configurations. In order to counteract such drawbacks, we have recently introduced a microwave imaging algorithm which looks for the scattering targets in terms of equivalent surface currents supported over a given reference plane. While this method is suited to detect shallowly buried targets, it allows to independently process each frequency data, hence the source and the receivers do not need to be synchronized. Moreover, spatial data can be reduced at large extent, without incurring in aliasing artefacts, by properly combining single-frequency reconstructions. In this paper, we validate such an approach by experimental measurements. In particular, the experimental test site consists of a sand box in open air where metallic plate targets are shallowly buried (few cm) under the air/soil interface. The investigated region is illuminated by a fixed transmitting horn antenna whereas the scattered field is collected over a planar measurement aperture at a fixed height from the air-sand interface. The transmitter and the receiver share only the working frequency information. Experimental results confirm the feasibility of the method.

The genus Beauveria include important entomopathogenic and endophytic fungi, among them, Beauveria bassiana is the most studied species. However, there are few knowledge regarding their antimicrobial activity. The current research has been conducted to evaluate in vitro antagonistic activity of B. bassiana and the antimicrobial efficacy of its Exo and Endo metabolites against Bacillus cereus, B. megaterium, Clavibacter michiganensis (gram positive bacteria, G+ve), Xanthomonas campestris, Pseudomonas aeruginosa and P. fluorescence (gram negative bacteria, G-ve). In addition, Solid-phase microextraction (SPME) was coupled to Gas Chromatography-Mass Spectrometry (GC/MS) to qualitatively measure the volatile organic compounds (VOCs) metabolic profile of the most efficient studied isolate of B. bassiana. The obtained results showed that, the isolate UniB2439-3 has promising antibacterial effect against most of studied target bacteria. SPME-GC/MS analysis of VOCs revealed the presence of ethanol; butanal,2-methyl; 2,4-dimethyl-1-heptene; octane, 4-methyl and β-elemene as the main dominant bioactive compounds. The outgoing results explicated that the efficient isolate of B. bassiana can be potentially used as a biocontrol agent against several bacteria especially G+ve ones.

The genus Beauveria include important entomopathogenic and endophytic fungi, among them, B. bassiana is the most studied species. However, there are few knowledge regarding their antimicrobial activity. The current research has been conducted to evaluate in vitro antibacterial efficacy of five isolates of B. bassiana against Bacillus cereus, B. megaterium, B. mojavensis, Clavibacter michiganensis (gram positive bacteria, G+ve), Xanthomonas campestris, X. vesicatoria, Escherichia coli, Pseudomonas aeruginosa and P. fluorescence (gram negative bacteria, G-ve). In addition, chemical composition of the principal diffusible metabolites and volatile organic compounds (VOCs) of the most efficient studied isolate of B. bassiana has been carried out using GC-MS analysis. The obtained results showed that, the isolate UniB2439-3 has promising antibacterial effect against most of studied target bacteria. GC-MS analysis of diffusible metabolites detected the presence of hexanedioic acid, bis(2-ethylhexyl) ester as the main compound in the cell-free culture filtrate. Furthermore, GC-MS analysis of VOCs revealed the presence of ethanol; butanal,2-methyl; 2,4-dimethyl-1-heptene; octane, 4-methyl and β-elemene as the main dominant bioactive compounds. The outgoing results explicated that, the isolates of B. bassiana have promising antibacterial activity which could be correlated to their diffusible and VOCs metabolites. Therefore, the selected isolate can be potentially used as a biocontrol agent against several bacteria especially G+ve ones. Taking in consideration that the antibiotics are forbidden in agriculture in many countries worldwide, search for possible natural alternatives as efficient antimicrobial agents are highly interesting.

Elastic peak electron spectroscopy, abbreviated EPES, involves ana- lyzing the line shape found in the elastic peak. The reduction in the energy of electrons of the elastic peak is a result of energy transfer to the target atoms, a phenomenon known as recoil energy. EPES differs from other electron spectroscopies in its unique ability to identify hydrogen in polymers and hydrogenated carbon-based materials. This feature is particularly noteworthy because lighter elements exhibit stronger energy shifts. The energy difference between the positions of the elastic peak of carbon and the elastic peak of hydrogen tends to increase as the kinetic energy of the incident electrons increases. If, during electron irradiation of an insulating polymer, the number of secondary electrons emitted by the surface is less than the number of electrons absorbed in the sample, the surface floats energetically until it stabilizes at a potential energy eVs. As a result, the interaction energy changes and modifies the energy difference between the elastic peaks of hydrogen and carbon. In this study, the charge effects are evaluated using the Monte Carlo method to simulate the EPES spectra of electrons interacting with polystyrene and polyethylene.

Finding an optimal combination of features and classifier is still an open problem in the development of automatic heartbeat classification systems, especially when applications that involve resource-constrained devices are considered. In this paper, a novel study of the selection of informative features and the use of a random forest classifier while following the recommendations of the Association for the Advancement of Medical Instrumentation (AAMI) and an inter-patient division of datasets is presented. Features were selected using a filter method based on the mutual information ranking criterion on the training set. Results showed that normalized R-R intervals and features relative to the width of the QRS complex are the most discriminative among those considered. The best results achieved on the MIT-BIH Arrhythmia Database were an overall accuracy of 96.14% and F1-scores of 97.97%, 73.06%, and 90.85% in the classification of normal beats, supraventricular ectopic beats, and ventricular ectopic beats respectively. In comparison with other state of the art approaches tested under similar constraints, this work represents one of the highest performances reported to date while relying on a very small feature vector.

The European Union's recent decision to renew the authorization for the use of glyphosate until 15 December 2033 stimulates the scientific discussion all around the world regarding its toxicity or otherwise for humans. Glyphosate is a chemical used by millions of tons in the last 50 years worldwide to drying weeds in cultivated fields, greenhouses, roadsides. Concern has been raised in many quarters about the possible presence in the food chain and the consequent adverse effects on health: both aspects that argue in favor of toxicity and those that instead may indicate limited toxicity of glyphosate are here discussed. The great debate that has been generated requires further investigations and field measurements to understand its fate once dispersed in the environment and its concentration in the food chain. Hence the need for validated analytical methods that are available to analysts in the field. In the present review, methods for the analytical determination of glyphosate and its main metabolite, AMPA, are discussed, with a specific focus on chromatographic techniques applied to cereal products. The experimental procedures are explained in any detail, including cleanup, derivatization, and instrumental conditions to give the laboratories involved enough information to proceed with the implementation of this line of analysis. The prevalent chromatographic methods used are LC-MS/MS, GC-MS/SIM, and GC-MS/MS but sufficient indications are also given to those laboratories that wish to use the simpler HPLC-FLD, HPLC-UV, GC-NPD or GC-FPD techniques for screening purposes. Concentrations from literature measured in wheat, corn, barley, rye, oats, soybean, and cereal-based foods are reported together with the regulatory status in various parts of the world and the accumulation mechanism. As for the accumulation in cereals, available data show that glyphosate tends to accumulate more in wholemeal flours than in refined ones, that its concentration in the product strictly depends on the treatment period (the closer it is to the time of harvesting, the higher the concentration) and that in cold climates the herbicide tends to persist in the soil for a long time.

“Non-Locality is most naturally incorporated into a theory in which there is a special frame of reference. One possible candidate for this special frame of reference is the one in which the Cosmic Microwave Background (CMB) is isotropic. However, other than the fact that a realistic interpretation of quantum mechanics requires a preferred frame and the CMB provides us with one, there is no readily apparent reason why the two should be linked” (L. Hardy). Starting from this remark we first argue that, given the present view of the vacuum, the basic tenets of Quantum Field Theory cannot guarantee that Einstein Special Relativity, with no preferred frame, is the physically realized version of relativity. Then, to try to understand the nature of the hypothetical preferred Σ−frame, we consider the so called ether-drift experiments, those precise optical measurements that try to detect in laboratory a small angular dependence of the two-way velocity of light and then to correlate this angular dependence with the direct CMB observations with satellites in space. By considering all experiments performed so far, from Michelson-Morley to the present experiments with optical resonators, and analyzing the small observed residuals in a modern theoretical framework, the long sought Σ− frame tight to the CMB naturally emerges. Finally, if quantum non-locality reflects some effect propagating at vastly superluminal speed vQI→∞, its ultimate origin could be hidden somewhere in the infinite speed cs→∞ of vacuum density fluctuations.

The paper deals with the Compound Inverse Rayleigh distribution, shown to constitute a proper model for the characterization of the probability distribution of extreme values of wind-speed, a topic which is gaining growing interest in the field of renewable generation assessment, both in view of wind power production evaluation and the wind-tower mechanical reliability and safety. The first part of the paper illustrates such model starting from its origin as a generalization of the Inverse Rayleigh model - already proven to be a valid model for extreme wind-speeds - by means of a continuous mixture generated by a Gamma distribution on the scale parameter, which gives rise to its name. Moreover, its validity to interpret different field data is illustrated, also by means of numerous numerical examples based upon real wind speed measurements. Then, a novel Bayes approach for the estimation of such extreme wind-speed model is proposed. The method relies upon the assessment of prior information in a practical way, that should be easily available to system engineers. In practice, the method allows to express one’s prior beliefs both in terms of parameters, as customary, and/or in terms of probabilities. The results of a large set of numerical simulations – using typical values of wind-speed parameters - are reported to illustrate the efficiency and the accuracy of the proposed method. The validity of the approach is also verified in terms of its robustness with respect to significant differences compared to the assumed prior information.

DFT calculations on the photoisomerization reactions of pyridazine N-oxide derivatives are presented. The irradiation of 3,6-diphenylpyridazine N-oxide allowed to obtain the first excited singlet state that underwent to a ring opening reaction induced to the oxygen migration to the adjacent carbon atom, with the formation of a diazo derivative. This intermediate can give a ring closure reaction to give a pyrazole derivative, or, with a higher transition energy, it can lose nitrogen allowing the formation of 2,5-diphenylfuran. The irradiation of 3-phenylpyridazine N-oxide allowed the formation only of 2-phenylfuran. In this case, calculations allowed to explain this behavior. The first excited singlet state gave a photoisomerization reaction with the formation of the corresponding diazo intermediate. This intermediate could not be converted into the corresponding pyrazole derivative because it was converted into a N-formyl pyrazole never reported in literature. The only possible reaction is the loss of nitrogen and the formation of 2-phenylfuran.

A wide variety of renal neoplasms can have cystic areas. It happens for different reasons: some tumors have an intrinsic cystic architecture, others have a pseudocystic degeneration of necrotic foci or they have cystically dilated renal tubules constrained by stromal neoplastic cells. Clear cell renal cell carcinoma (CCRCC), either solid or cystic, is the most frequent type of renal cancer. While pseudocysts are found in high-grade aggressive CCRCC, cystic growth is associated to low-grade indolent cases. The latter also form through a cyst-dependent molecular pathway and they are more frequent in patients suffering from VHL disease. The differential diagnosis with multilocular cystic renal neoplasm of low malignant potential and clear cell papillary renal cell tumor can be especially hard and it requires a focused macroscopical and microscopical pathological analysis. As every class of renal tumors include cystic forms, a knowledge of criteria for a differential diagnosis is mandatory.

The internationals guidelines about food intolerances, allergy and immunity provide for rigorous steps in which ultrasonography is not provided. However there is evidence in literature about an ancillar role of ultrasonography in these conditions. In this report we analyze the main pathologies with allergic or immune pathogenesis

The relationships among the potential causes of a car and motorcycle collision involving turn maneuvers as well as the perception of rear and front turn signal (on/off) configuration is examined in this paper. The investigation has been based on data pooled from the answers of a survey proposed to 136 people, with special regards to the correct detection of indicators aspect. Experimental videos have been realized during the tests campaign, both in urban and suburban areas, using a 360-camera attached to a motorcyclist’s helmet, reproducing vehicular conflicts able to potentially generate crash risks. The detection of the blinker was combined with other factors (e.g. age, gender, location of the test site, presence of the car behind tester vehicles and if the bikers are also habitual car or bike drivers) in a stepwise logistic regression that modelled the odds of detecting the turn signal turned on as a function of all of these factors. The results suggest the existence of a connection between the detection of the turn signal aspect and some of the variables considered (e.g. age, being a cyclist or a car driver and the presence of a protecting car).

The reaction of pyridinium chlorochromate with furan to give enedione derivatives cannot be performed by using commercial PCC. Homemade and commercial PCC had different color and showed some differences in the XRD spectrum. XPS showed the presence of relevant amount of Cr(III) in the homemade reagent. DFT calculations showed that Cr(III) impurities in the reagent can catalyze the reaction with furan derivatives, if oxygen atom in the Cr(III) derivative attacks the furan ring, while it is reoxidized by PCC, through a migration of a chlorine atom.

In the field of low power wireless networks, one of the techniques on which many researchers are putting their efforts is related to positioning methodologies such as fingerprinting in dense urban areas. This paper presents an experimental study aimed at quantifying the mean location estimation error in densely urbanized areas.Using a dataset made available by the University of Antwerp, a neural network was implemented with the aim of providing the position of the end-devices. In this way it was possible to measure the mean location estimation error in an area with high urban density. The results obtained show an accuracy in the localization of the end-device of less than 150 meters.This result would make it possible to use the fingerprint instead of alternative, energy consuming, methodologies such as GPS in IoT (Internet of Things) applications where battery life is the primary requirement to be met.

Statins prevent cardiovascular diseases, yet their use is limited by the muscle disturbances they cause. Rarely, statin-induced myopathy is autoimmune, but more commonly it is due to direct muscle toxicity. Available evidence suggests that statin-induced creatine deficiency may be a major cause of this toxicity, and that creatine supplementation prevents it. Statins inhibit guanidinoacetate methyl transferase (GAMT), the last enzyme in the synthesis of creatine, thus they decrease its intracellular content. Such decreased content could cause mitochondrial impairment, since creatine is the final acceptor of the phosphate group of adenosine triphosphate (ATP) at the end of mitochondrial oxidative phosphorylation. Decreased cellular synthesis of adenosine triphosphate (ATP) would follow. Accordingly, ATP synthesis is decreased in statin-treated cells. In vitro, creatine supplementation prevents the opening of mitochondrial permeability transition pore caused by statins. Clinically, creatine administration prevents statin myopathy in statin-intolerant patients. Additional research is warranted to hopefully confirm these findings. However, creatine is widely used by athletes with no adverse events, and has demonstrated to be safe even in double-blind, placebo-controlled trials of elder individuals. Thus, it should be trialed, under medical supervision, in patients who cannot assume statin due to the occurrence of muscular symptoms.

Carbon nanotubes have been attracting considerable interest among material scientists, physicists, chemists and engineers for almost 30 years. Owing to their high aspect ratio, coupled with remarkable mechanical, electronic and thermal properties, carbon nanotubes have found application in diverse fields. In this review, we will cover the work on carbon nanotubes used for sensing applications. In particular, we will see examples where carbon nanotubes act as main players in devices sensing biomolecules, gas, light or pressure changes. Furthermore, we will discuss how to improve the performance of carbon nanotube-based sensors after proper modification.

Anatomy education plays a critical role in medical practice, and the level of anatomical knowledge among students and physicians significantly impacts patient care. This article presents a pilot project conducted by the University of Milan aimed at exploring the effectiveness of the Area9's Rhapsode platform, an intelligent tutoring system that uses artificial intelligence to personalize learning and collect data on mastery acquisition. The study focused on liver anatomy and employed a flipped classroom approach, incorporating adaptive learning modules and an interactive in-class session. The project's execution, outcomes and preliminary pedagogical considerations are discussed. The results demonstrated improved learning quality, positive repurposing of study time, enhanced metacognitive awareness among students, with most of students demonstrating conscious mastery of the materials and a clear understanding of their level of competence. This approach, by providing valuable insights into the potential of artificial intelligence-based adaptive learning systems in anatomy education, could address the challenges posed by limited teaching hours, shortage of anatomist and the need for individualized instruction, with recommendations for future research and the expansion of adaptive learning modules to other anatomical districts.

Bone is the second most frequent site of metastases from differentiated thyroid carcinoma (DTC). Bone metastases (BM) occurs in about 10% of all patients with DTC. They are more frequently observed in follicular thyroid carcinoma (FTC) (7-28%), than in thyroid papillary carcinoma (PTC) (1-7%) [1,2] and are associated to unfavorable clinical out-comes, mainly related to skeletal related events (SREs), such as pathologic fractures, bone pain, spinal cord compressions and hypercalcemia, which impair the quality of life and reduce life expectancy. BM from DTC require multimodal and comprehensive treatment, including radioiodine therapy (RAI), palliative treatment, surgical treatment, external beam radiation and target drug therapy. RAI is the first line treatment, but about two thirds of DTC patients with distant metastases are not definitively cured. This treatment is considered less effective in BM particularly in case of large metastases. The different response to RAI treatment alone or associated to BM focal treatment depends to RAI avidity of lesions [3]. We report the rare case of an excellent response to RAI of a metachronous bone metastasis of skull from FTC, in a 72 yrs old woman, diagnosed 15 years after the first treatment, followed by a complete regression of radioiodine up-taking area with persistence of excellent response to the treatment six years after it. This case confirms that the complete BM response to RAI treatment depends to the degree of dedifferentiation of cancers cells and enforce the concept of a long- life follow-up of FTC patients.

Starting from Thomas Friedrich’s work “Weak Spin(9) structures on 16-dimensional Riemannian manifolds”, we review several interactions between Spin(9) and geometries related to octonions. Several topics are discussed in this respect: explicit descriptions of the Spin(9) canonical 8-form and its analogies with quaternionic geometry, the role of Spin(9) both in the classical problems of vector fields on spheres and in the geometry of the octonionic Hopf fibration. Next, we deal with locally conformally parallel Spin(9) manifolds in the framework of intrinsic torsion. Finally, we discuss applications of Clifford systems and Clifford structures to Cayley-Rosenfeld planes and to three series of Grassmannians.

Background: Swimming and, specifically, front crawl, can be included among the "overhead" sports. Overhead sports are a risk factor for some problems of the musculoskeletal system, especially the shoulder. The aim of the study was assessing the incidence of shoulder and neck pain in a Masters Swimming Team and its correlation with the crawl stroke. Methods: It is an observational study through video-analysis of the stroke and a questionnaire. The participants are 61 athletes of a Master team, whose prevailing training stroke was the front crawl were selected for the present study. Their stroke was analyzed during training by a go-pro camera mounted on a sliding trolley on a track, evaluating with their trainer their technical defects. A questionnaire about frequency of shoulder and neck pain during the last five years was administered to all the participants at the study. Results: From the questionnaire, 45 and 55 out of 61 athletes had suffered from shoulder pain and cervical pain, respectively. Both types of pain were correlated with the weekly swimming volume. The swimmers with hyperflexion of the wrist and prolonged internal rotation in the pulling phase had shoulder problems. Those who suffered from current shoulder pain reduced the underwater time. The four swimmers with an excessive body roll during breathing and those who kept their heads extended, reported cervical pain. Conclusions: Shoulder and neck pain could be prevented with the correction of specific technical errors in crawl stroke.

This study provides a unique procedure for validating and reconstructing temperature and precipitation data. Although developed from data in Middle Italy, the validation method is intended to be universal, subject to appropriate calibration according to the climate zones analysed. This~research is an attempt to create shared applicative procedures that are most of the time only theorized or included in some software without a clear definition of the methods. The purpose is to detect most types of errors according to the procedures for data validation prescribed by the World Meteorological Organization, defining practical operations for each of the five types of data controls: gross error checking, internal consistency check, tolerance test, temporal consistency, and~spatial consistency. Temperature and~precipitation data over the period 1931--2014 were investigated. The~outcomes of this process have led to the removal of 375 records (0.02%) of temperature data from 40 weather stations and 1286 records (1.67%) of precipitation data from 118 weather stations, and 171 data points reconstructed. In conclusion, this work contributes to the development of standardized methodologies to validate climate data and provides an innovative procedure to reconstruct missing data in the absence of reliable reference time series.

The yeast Saccharomyces cerevisiae ensures successful fermentation in winemaking, although the persistent use of commercial strains lead the loss of aroma complexity of wines. Hence, the research of indigenous S. cerevisiae with proper oenological features and well adapted to specific wine-growing area become of great interest for winemakers. Here, 206 S. cerevisiae strains were isolated from two wineries during two-year sampling campaign and bio-typed with the aim to evaluate the occurrence and persistence of S. cerevisiae wild population linked to each winery. Both wineries belonging to the same Verdicchio DOC wine area (Castelli di Jesi), and never used commercial yeasts during fermentation. Results showed a specific and varied population of S. cerevisiae in each winery without cross-contamination each other and with commercial starter strains. Moreover, inside each winery it was observed a persistent of some dominant biotypes over the time, indicating a sort of “winery-effect”. The evaluation of S. cerevisiae populations for the oenological characters showed a proper and well distinct aromatic imprinting on the resulted wines confirming the “winery effect”.

Background: The purpose of this article is to update the diagnostic assessment, therapeutic approach, and 12-18 month follow up of patients added in the Italian Lombardy ADHD Register. Methods: Data on patients evaluated by the 18 Regional ADHD Reference Centres in the ten year period from 2011 to April 2021 were analysed. Results: 4091 of 5934 added patients received a diagnosis of ADHD. In 20.3% of cases, there was a family history of ADHD. 2879 children (70.4%) had at least one comorbidity disorder, the most common of which was learning disorder (39%). Nearly all (95.9%) received at least one psychological prescription, 17.9% of them almost one pharmacological treatment, and 15.6% a combination of both. Values of ≥5 of the Clinical Global Impressions- Severity (CGI-S) are more commonly presented by patients with a pharmacological prescription than with a psychological treatment (p < .0001). A significant improvement was reported in half of the patients followed after 1 year, with Clinical Global Impressions- Improvement (CGI-I ≤ 3). In all, 233 of 4091 are 18 year old patients. Conclusion: A ten year systematic monitoring of models of care was a fruitful shared and collaborative initiative in order to promote significant improvement in clinical practice, providing effective and continuous quality of care. The unique experience here reported should spread.

In this paper an integrated methodology for the coupling between 1D- and 3D-CFD simulation codes is presented, which has been developed to support the design and calibration of new diesel engines. The aim of the proposed methodology is to couple 1D engine models, which may be available in the early-stage engine development phases, with 3D predictive combustion simulations, in order to obtain reliable estimates of engine performance and emissions for newly designed automotive diesel engines. The coupling procedure features simulations performed in 1D-CFD by means of GT-SUITE and in 3D-CFD by means of Converge, executed within a specifically designed calculation methodology. An assessment of the coupling procedure has been performed by comparing its results with experimental data acquired on an automotive Diesel engine, considering different working points including both part load and full load conditions. Different multiple injection schedules have been evaluated for part-load operation, including pre and post injections. The proposed methodology, featuring detailed 3D chemistry modeling, was proven to be capable to properly assess pollutant formation, specifically to estimate NOx concentrations. Soot formation trend was also well-matched for most of the explored working points. The proposed procedure can therefore be considered as a suitable methodology to support the design and calibration of new Diesel engines, thanks to its ability to provide reliable engine performance and emissions estimations from the early-stage of a new engine development.

Heart failure (HF) is a disease state which has been shown to affect 1-2% of the global population, being often associated with comorbidities such as diabetes, hypertension, obesity or hyperlipidaemia which increase the prevalence of the disease, the rate of hospitalization and the mortality. Although recent advances in both pharmacological and non pharmacological approaches have led to significant improvements in clinical outcomes in patients affected by HF, residual unmet needs remain. Treatment of the disease remains unclear particularly related to poorly defined strategies in the early stages of myocardial dysfunction. Nutritional support in patients developing HF and nutraceutical supplementation have recently been shown to may contribute in the protection of the failing myocardium, though their place in the treatment of HF still needs to be better clarified. In this context, the ONUS-HF working group aimed to assess the optimal nutraceutical approach to HF in the early phases of the disease in order to counteract selected pathways which are imbalanced in the failing myocardium. In particular, we reviewed several of the most relevant pathophysiological and molecular changes occurring druing the early stages of myocardial dysfunction. These include mitochondrial and sarcoplasmic reticulum stress, insufficient nitric oxide (NO) release, cardiac stem cell mobilization and imbalanced regulation of metalloproteinases. Several candidates for nutraceutical supplementation in HF, such as CoQ10, grape seed extract, Olea Europea L- related antioxidants, SGLT2 inhibitors-rich apple extract and bergamot polyphenolic fraction have been assessed for their potential contribution to cardiomyocyte prottection. This approach should define the optimal approach for more targeted and successful strategies based on the use of nutraceuticals in HF to be confirmed by means of clinical trials exploring efficacy and safety of these compounds.

Heparanase (HPSE) has been defined as a multitasking protein that exhibits a peculiar enzymatic activity towards HS chains but which simultaneously performs other non-enzymatic functions. Through its enzymatic activity, HPSE catalyzes the cutting of the side chains of heparan sulfate (HS) proteoglycans, thus contributing to the remodeling of the extracellular matrix and of the basal membranes. Furthermore, thanks to this activity, HPSE also promotes the release and diffusion of various HS-linked molecules as growth factors, cytokines and enzymes. In addition to being an enzyme HPSE has been shown to possess the ability to trigger different signaling pathways by interacting with transmembrane proteins. In normal tissue and in physiological conditions, HPSE exhibits only low levels of expression restricted only to keratinocytes, trophoblast, platelets and mast cells and leukocytes. On the contrary, in pathological conditions, such as in tumor progression and metastasis, inflammation and fibrosis, it is overexpressed. With this brief review, we intend to provide an update on current knowledge about the different role of HPSE protein exerted by its enzymatic and not-enzymatic activity.

Heparanase (HPSE) has been defined as a multitasking protein that exhibits a peculiar enzymatic activity towards HS chains but which simultaneously performs other non-enzymatic functions. Through its enzymatic activity, HPSE catalyzes the cutting of the side chains of heparan sulfate (HS) proteoglycans, thus contributing to the remodeling of the extracellular matrix and of the basal membranes. Furthermore, thanks to this activity, HPSE also promotes the release and diffusion of various HS-linked molecules as growth factors, cytokines and enzymes. In addition to being an enzyme HPSE has been shown to possess the ability to trigger different signaling pathways by interacting with transmembrane proteins. In normal tissue and in physiological conditions, HPSE exhibits only low levels of expression restricted only to keratinocytes, trophoblast, platelets and mast cells and leukocytes. On the contrary, in pathological conditions, such as in tumor progression and metastasis, inflammation and fibrosis, it is overexpressed. With this brief review, we intend to provide an update on current knowledge about the different role of HPSE protein exerted by its enzymatic and not-enzymatic activity.

Fermented food matrices, including beverages, can be defined as the result of the activity of complex microbial ecosystems where different microorganisms interact according to different biotic and abiotic factors. Certainly, in industrial production the technological processes aim to control the fermentation to place safe foods on the market. Therefore, if food safety is the essential prerogative, consumers are increasingly oriented towards a healthy and conscious diet driving the production and consequently the applied research towards natural processes. In this regard, the aim to guarantee safety, quality and diversify of products should be reached limiting or avoiding the addition of antimicrobials or synthetic additives using the biological approach. In this paper, following the recent re-evaluation of non-Saccharomyces yeasts (NSYs) has been re-viewed the bio-protectant and biocontrol activity with a particular focus on their antimicrobial power, probiotic features and promoting functional aspects. In this review, the authors would underline the contribution of NSYs in all food production chain and its role in the technological and fermentative features for their practical and useful use as biocontrol agent in food preparations.

We developed a novel approach in the field of spatiotemporal modelling, based on the spatialisation of time: the Timescape algorithm. It is especially aimed at sparsely distributed datasets in ecological research, whose spatial and temporal variability is strongly entangled. The algorithm is based on the definition of a spatiotemporal distance that incorporates a causality constraint and that is capable of accommodating the seasonal behaviour of the modelled variable as well. The actual modelling is conducted exploiting any established spatial interpolation technique, substituting the ordinary spatial distance with our Timescape distance, thus sorting, from the same input set of observations, those causally related to each estimated value at a given site and time. The notion of causality is expressed topologically and it has to be tuned for each particular case. The Timescape algorithm originates from the field of stable isotopes spatial modelling (isoscapes), but in principle it can be used to model any real scalar random field distribution.

In the fashion field, the use of electroplated small metal parts such as studs, clips and buckles is widespread. The plate is often made of precious metal, such as gold or platinum. Due to the high cost of these materials, it is strategically relevant and of primary importance for manufacturers to avoid any waste by depositing only the strictly necessary amount of material. To this aim, Companies need to be aware of the overall number of items to be electroplated so that it is possible to properly set the parameters driving the galvanic process. Accordingly, the present paper describes a Machine Vision-based method able to automatically count small metal parts arranged on a galvanic frame. The devised method relies on the definition of a proper acquisition system and on the development of image processing-based routines. Such a system is then implemented on a counting machine is meant to be adopted in the galvanic industrial practice to properly define a suitable set or working parameters (such as current, voltage and deposition time) for the electroplating machine and, thereby, to assure the desired plate thickness from one side and to avoid material waste on the other.

The important sampling parameters of a headspace solid phase microextraction-gas chromatography-mass spectrometry (HS-SPME-GC-MS) procedure, extraction temperature, extraction time and sample volume were optimized to quantify 23 important impact odorants in reduced alcohol red and white wines. A three-factor design of Box-Behnken experiments was used to determine optimized sampling conditions for each analyte, and a global optimized condition at every ethanol concentration of interest determined using a desirability function that accounts for a low signal response for compounds. Shiraz and Chardonnay wines were dealcoholized from 13.7 and 12.2% v/v ethanol respectively, to 8 and 5% v/v, using a commercially available membrane-based technology. A sample set of the reduced alcohol wines were also reconstituted to their natural ethanol level to evaluate the effect of ethanol content reduction on volatile composition. The three-factor Box-Behnken experiment ensured an accurate determination of the headspace concentration of each compound at each ethanol concentration, allowing comparisons between wines at varying ethanol levels to be made. Overall, the results showed that the main effect of extraction temperature was considered the most critical factor when studying the equilibrium of reduced alcohol wine impact odorants. The impact of ethanol reduction upon the concentration of volatile compounds clearly resulted in losses of impact odorants from the wines. The concentration of most analytes decreased with dealcoholization compared to that of the natural samples. Significant differences were also found between the reconstituted volatile composition and 5% v/v reduced alcohol wines, revealing that the dealcoholization effect is the result of a combination between the type of dealcoholization treatment and reduction in wine ethanol content.

Process simulation represents an important tool for plant design and optimisation, either applied to well established or to newly developed processes. Suitable thermodynamic packages should be selected in order to properly describe the behaviour of reactors and unit operations and to precisely define phase equilibria. Moreover, a detailed and representative kinetic scheme should be available to predict correctly the dependence of the process on its main variables. This review points out some models and methods for kinetic analysis specifically applied to the simulation of catalytic processes, as a basis for process design and optimisation. Attention is paid also to microkinetic modelling and to the methods based on first principles, to elucidate mechanisms and calculate thermodynamic and kinetic parameters. Different case histories support the discussion. At first, we have selected two basic examples from the industrial chemistry practice, e.g. ammonia and methanol synthesis, which may be described through a relatively simple reaction pathway. Then, a more complex reaction network is deeply discussed to define the conversion of bioethanol into syngas/hydrogen or into building blocks, such as ethylene.

Obturator herniæ are a quite rare type of abdominal hernia, accounting for less then 1% of all abdominal wall hernias and for 0.2-1.6% of patient with a small bowel obstruction. The obturator canal is the only portion of the obturator foramen that is not obliterated by the membrane of the same name and hosts the obturator neurovascular bundle; it is, for this reason, a locus minoris resistentiae, through which obturator hernias are formed, generally in elderly, multiparous women. Despite the fact that Computed Tomography offers the possibility of a quick, correct preoperative diagnosis, often signs and symptoms of obturator herniæ are quite unspecific; considering that, at the same time, patients with an obturator hernia are generally elderly, with concurrent conditions, this might cause delays in the diagnosis and treatment and produces the high postoperative mortality rates that obturator herniæ yield

Background: Glioblastoma is the most common primary brain neoplasm in adults, with still a poor prognosis despite a constant effort to improve patients’ survival. Some neuroradiological volumetric parameters seem to play a predictive role on Overall Survival (OS) and Progression Free Survival (PFS). The aim of this study is to analyze the impact that the volumetric areas of contrast-enhancing tumor and perineoplastic edema have on survival of patients treated for glioblastoma; Methods: A series of 87 patients who underwent surgery was retrospectively analyzed; OS and PFS were considered as the end points of the study. For each patient a multidisciplinary revision was conducted in collaboration with the Neuroradiology and Neuro-Oncology board. A manual and semi-automatic measurement were adopted to perform the radiological evaluation: contrast Enhancement Preoperative (CE-PTV) and Postoperative Tumor Volume (CE-RTV), Edema/Infiltration Preoperative (T2/FLAIR-PV) and Postoperative Volume (T2/FLAIR-RV); necrosis volume inside the tumor (NV); total tumor volume, including necrosis (TV); Results: The median OS value was 9 months and the median PFS value was 4 m; the mean values were respectively 12,3 m and 6,9 m. Multivariate analysis showed that the OS related factors were: adjuvant chemo-radiotherapy (p &lt; 0,0001), CE-PTV &lt; 15 cm³ (p=0,03), surgical resection &gt; 95% (p=0,004) and the presence of a “pseudo-capsulated” radiological morphology (p=0,04); Conclusions: maximal safe resection is one of the most relevant predictive factors for patients’ survival. The semi-automatic pre-operative MRI evaluation could play a key role in prognostically categorizing these tumors.

This study evaluated the effect of pig diet supplementation with an Olea europaea L. extract on the muscle fatty acid composition. Ten commercial hybrid pigs (Large White x (Landrace x Duroc)) were randomly assigned to two experimental treatments and fed either a standard diet (C) or diet with olive leaves extract (OL). For 90 days, the OL group received the olive leaf extract (300 mg/head/day), which mainly comprises oleuropein diglucoside, luteolin-7-glucoside, and verbascoside. The phenolic content, antioxidant activity, bioactive molecules’ characterization, and the fatty acids profile of meat and diet were performed. The results indicated that while the OL supplementation did not significantly alter the overall chemical composition of the meat or the pigs' performance, it did modify the lipid profile of the meat. The OL diet results in a significant reduction in SFA and an increase in oleic acid in meat, which correspondingly elevates the total MUFA content. Dietary treatment reduced the sum of n-6 PUFA in the meat of the OL group, and resulted in a significantly lower n-6/n-3 PUFA ratio. Therefore, these findings suggest that incorporating olive leaf extract into the pig diet enhances the nutritional and functional quality of the meat by improving its fatty acid profile.

Material and methods. The trial was carried out over two years in Southern Italy. Two grapevine rootstocks, 110R and SO4, were compared to evaluate the water extraction ability from the soil and the effect on the yield and quality of the Cardinal grapevine table cultivar. Therefore, a new approach to plant water consumption based on sap flow was adopted. Results. The earlier and faster water refilling of the xylem in Cardinal onto 110R (C/110R) appears responsible for the earlier evolution of the phenological phases than Cardinal onto SO4 (C/SO4). The maximum length of the principal shoot was reached in Cardinal/110R compared to C/SO4, while a higher number of lateral shoots with lower internode has changed canopy architecture and light distribution in C/SO4. The 110R used more water compared to SO4; it was possible to quantify the real transpired flux of the plant per day: sap flow was 12.3 L.plant-1.d-1 and 11.7 L.plant-1d-1 in C/110R in the first and second year, respectively, while it was 14% lower in alternative graft combination. Conclusions. However, C/SO4 was able to sustain leaf water status and physiological mecha-nisms, although with lesser performance than C/110R, but that did not cause negative effects on production parameters.

We report the electronic, magnetic and transport properties of a prototypical antiferromagnetic (AFM) spintronic device. We chose Cr as the active layer because it is the only room-temperature AFM elemental metal. We sandwiched Cr between two non-magnetic metals (Pt or Au) with large spin-orbit coupling. We also inserted a buffer layer of insulating MgO to mimic the structure and finite resistivity of a real device. We found that, while spin-orbit has a negligible effect on the current flowing through the device, the MgO layer plays a crucial role. Its effect is to decouple the Cr magnetic moment from Pt (or Au) and to develop an overall spin magnetization. We have also calculated the spin-polarized ballistic conductance of the device within the Büttiker-Landauer framework, and we have found that for small applied bias our Pt/Cr/MgO/Pt device presents a spin polarization of the current amounting to ~25%.

Non-alcoholic beer (NAB) or low alcoholic beer (LAB) are taking over the market with a growing sale. Sus-tainable recycling and valorization of exhausted brewer’s spent grains (BSG) coming from craft beer is a relevant issue in brewing process. In this work, recycled BSG and BSG+GJ (supplemented with 10% grape juice) were used as wort-substrate to inoculate already selected non-conventional yeasts to produce NABLAB craft beer. Results showed that wort composed by only recycled BSG produced appreciate NAB beers (ethanol from 0.12% to 0.54 % v/v) while the addition of 10% of grape juice made LAB beers (ethanol from 0.82 to 1.66 % v/v). As expected, volatile compounds production was highest with the addition of grape juice. Lachancea thermotolerans confirmed the lactic acid production and, as Saccharomyces cerevisiae, is characterized by (in both worts) ethyl butyrate and isoamyl acetate, while Torulaspora delbrueckii produced relevant amounts of exanol, phenylethyl acetate and β-phenyl ethanol (wort added with grape juice). Wickeramhomyces anomalus and Pichia kluyvery showed consistent volatile production but only in wort with grape juice addition where a fermentation activity was exhibited. The overall results indicated that reused BSGs, non-conventional yeasts and grape juice is a suitable strategy for specialty NABLAB beer.

The art of dyeing textiles has a long history, as natural dyes have been used since prehis-toric times. With the development of synthetic dyes in the 19th century, the focus shifted from natural to synthetic dyes due to their superior properties. Recently, however, interest in natural dyes has increased again due to environmental and health concerns. Among industrial dyes, heterocyclic dyes, especially azo dyes, are of great importance due to their color brilliance and fastness. This review examines the synthesis, application and analysis of azo dyes, especially heterocyclic dyes. It deals with monoazo, diazo and polyazo dyes and highlights their structures, synthesis methods and fastness properties. In addition, the ecological impact of azo dyes and practical solutions for their synthesis and application are discussed.

Keywords: Baseband, GeoSurf Constellation, Interference, Linear Distortions, Passband, Time Delay, Rain attenuation, Synthetic Storm Technique, ultra–wideband.

Attention Deficit Hyperactivity Disorder is a neurodevelopmental disorder characterised by core symptoms of impulsivity, locomotor hyperactivity, and inattention affecting around 5% of children and adolescents worldwide. Although this brain illness is wrongly considered a childhood disorder, increasing evidences suggest that it can persist into adulthood in about 65% of cases leading to significant clinical, socio-relational, and occupational disabilities. Pharmacological and non-pharmacological treatments currently available permit to achieve numerous benefits, in particular, if started early in childhood, however, quality of life of patients affected by ADHD could be compromised in any case in terms of self-esteem, ability to finalize projects, and personal satisfaction. In this study we evaluated the impact of micronutrient formulations on ADHD symptoms in both children and adults analyzing results of randomized, placebo-controlled trials.

Psychedelics extracted by plants have been used in religious, spiritual and mystic practices for millennia. In 1957, Dr. Hofmann have identified and synthesized the prodrug psilocybin, a substance present in more than 200 species of psychedelic mushrooms. Although the limitations related to the scientific design of many studies, clinical observations performed during the 1950s and the 1960s have shown a potential therapeutic effect of psilocybin in patients affected by depressive symptoms, anxiety, and conversion disorder. Psilocybin was classed as a schedule I substance in 1970, but the fascination for psychedelics remained almost unchanged over time promoting a new scientific interest starting from the 1990s. Recent studies provided further evidences supporting the suggestive hypothesis of a therapeutic use of psilocybin for treating various psychiatric disorders including: pathological anxiety, mood depressive disorder and addiction.

In this work we theoretically investigate the responsivity/noise equivalent power (NEP) trade-off in graphene/semiconductor Schottky photodetectors (PDs) operating in the near-infrared regime and working at room temperature. Our analysis shows as the responsivity/NEP ratio is strongly dependent on the Schottky barrier height (SBH) of the junction and we derive a closed analytical formula for maximizing it. In addition, we theoretically discuss as the SBH is linked to the bias applied to the junction in order to show how these devices could be optimized in practice for different semiconductors. We discover that graphene/n-silicon (Si) Schottky PDs could be optimized at 1550nm showing a responsivity and NEP of 133mA/W and 500fW/Hz, respectively, by a low reverse bias of only 0.66V. Moreover, we show that graphene/n-germanium (Ge) Schottky PDs optimized in term of responsivity/NEP ratio could be employed at 2000nm with a responsivity and NEP of 233mA/W and 31pW/Hz, respectively. We believe that our insights are of great importance in the field of silicon photonics for the realization of Si-based PDs to be employed in power monitoring, lab-on-chip and environment monitoring applications.

The Bay of Espirito Santo is located in the Espírito Santo State, in the eastern part of Brazil. It is surrounded by the city of Vitoria on one side and by the Atlantic Ocean on the other. Superficial sediments of Espirito Santo Bay were analyzed at 12 (western shallow silt sediments) + 8 (eastern sandy sediments and relatively deep sampling stations) = 20 uniformly distributed sampling points where geochemical analysis was performed. Nineteen elements were analyzed: Mo, Cu, Pb, Zn, Ag, Ni, Mn, Fe, As, U, Th, Sr, Cd, Sb, Bi, V, Cr, Ba, and Al. This selection was made based on the most representative heavy metals present in this area and according to the results obtained from the geochemical analysis. Their concentrations were compared with metal contamination benchmarks like Screening Quick Reference Tables (SQuiRTs), Effects Range-Low (ERLs) and Effects Range-Median (ERMs), TELs (Threshold Effects Levels), PELs (Probable Effects Levels), ERM (Effects range median), and AETs (Apparent Effects Thresholds). Results indicate that there is no particular pollution condition able to alter the condition of any part of this water body. The Authors conclude that the Espirito Santo Bay is only moderately polluted and some elements are virtually absent.

The Bay of Espirito Santo is located in the Espírito Santo State, in the eastern part of Brazil. It is surrounded by the city of Vitoria on one side and by the Atlantic Ocean on the other. Superficial sediments of Espirito Santo Bay were analyzed at 12 (western shallow silt sediments) + 8 (eastern sandy sediments and relatively deep sampling stations) = 20 uniformly distributed sampling points where geochemical analysis was performed. Nineteen elements were analyzed: Mo, Cu, Pb, Zn, Ag, Ni, Mn, Fe, As, U, Th, Sr, Cd, Sb, Bi, V, Cr, Ba, and Al. This selection was made based on the most representative heavy metals present in this area and according to the results obtained from the geochemical analysis. Their concentrations were compared with metal contamination benchmarks like Screening Quick Reference Tables (SQuiRTs), Effects Range-Low (ERLs) and Effects Range-Median (ERMs), TELs (Threshold Effects Levels), PELs (Probable Effects Levels), ERM (Effects range median), and AETs (Apparent Effects Thresholds). Results indicate that there is no particular pollution condition able to alter the condition of any part of this water body. The Authors conclude that the Espirito Santo Bay is only moderately polluted and some elements are virtually absent.

It is well known that the major constrain to the efficiency of photovoltaic (PV) devices comes from the generation of unused heat. In this context, thermoelectric generators have been proposed as a viable heat recovery solution, leading to an increase of the overall efficiency. Within this kind of hybrid solutions, the PV and TEG parts can be either electrically separated or connected in the same circuit. In the second case, the presence of the TEG in series to the PV cell can lead to electrical losses. In this work we analyze the effect of various parameters on the output power of electrically hybridized HTEPV systems by means of both electrical measurements and simulations. The results reveal that while electrical lossless condition exists (as also reported in previous work) it not always corresponds to significant power gains respect with the sole PV case. In addition, the strong temperature sensitivity of the lossless condition makes the electrical hybridization hardly practically implementable. This sensitivity in the framework of an actual application scenario, where the solar radiation is variable over time, would make the system working often in a suboptimal regime. The present study gives a new understanding on the actual applicability of electrically hybridized HTEPV devices.

Oil spills are adverse events that may be very harmful to ecosystems and food chain. In particular, large sea oil spills are very dramatic occurrence often affecting sea and coastal areas. Therefore the sustainability of oil rig infrastructures and oil transportation via oil tankers are linked to law enforcement based on proper monitoring techniques which are also fundamental to mitigate the impact of such pollution. Within this context, in this study a meaningful showcase is analyzed using remotely sensed measurements collected by the Synthetic Aperture Radar (SAR) operated by the COSMO-SkyMed (CSK) constellation. The showcase presented refers to the Deepwater Horizon (DWH) oil incident that occurred in the Gulf of Mexico in 2010. It is one of the world's largest incidental oil pollution event that affected a sea area larger than 10,000 km². In this study we exploit, for the first time, dual co-polarization SAR data collected by the Italian CSK X-band SAR constellation showing the key benefits of HH-VV SAR measurements in observing such a huge oil pollution event, especially in terms of the very dense revisit time offered by the CSK constellation.

Late type II endoleak (T2EL) arising from internal iliac artery (IIA) network may occur after endovascular aortic repair (EVAR) of aortoiliac aneurysm and may require embolization if sac enlargement is demonstrated. When direct antegrade access to ipsilateral IIA is not achievable due to previous vessel coverage and/or embolization, access to the nidus can be challenging. We report a case of T2EL originating from IIA network causing iliac sac enlargement in a patient previously treated by EVAR for artoiliac aneurysm with IIA embolization and coverage, in which embolization of the nidus was performed through a percutaneous sheathless access to ip-silateral superior gluteal artery (SGA). A literature review dealing with all cases of percutaneous direct SGA access for retrograde embolization of T2EL arising from IIA after previous EVAR is also reported. The research was conducted on Pubmed database using keywords “superior glu-teal artery access,” “transgluteal embolization” and “retrograde embolization for type II endo-leak”. Related articles and references were screened for suitable articles.

Low-cost RGB-D cameras are increasingly used in several research fields including human-machine interaction, safety, robotics, biomedical engineering and even Reverse Engineering applications. Among the plethora of commercial devices, the Intel RealSense cameras proved to be among the best suitable devices, providing a good compromise between cost, ease of use, compactness and precision. Released on the market in January 2018, the new Intel model RealSense D415 has a wide acquisition range (i.e. ~160-10000 mm) and a narrow field of view to capture objects in rapid motion. Given the unexplored potential of this new device, especially when used as a 3D scanner, the present work aims to characterize and to provide metrological considerations on the RealSense D415. In particular, tests are carried out to assess the device performances in the near range (i.e. 100-1000 mm). Characterization is performed by integrating the guidelines of the existing standard (i.e. the German VDI/VDE 2634 part 2 normative) with a number of literature-based strategies. Performance analysis is finally compared against latest close-range sensors, thus providing a useful guidance for researchers and practitioners aiming to use RGB-D cameras in Reverse Engineering applications.

The amount of outdoor particles that indoor environments receive depends on the particle infiltration factors (Fin), peculiar of each environment, and on the outdoor aerosol concentrations and size distributions. The respiratory doses received, while residing indoor, will change accordingly. This study aims to ascertain to what extent such doses are affected by the vertical distance from the traffic sources. Particle number size distributions have been simultaneously measured at street level and at about 20 m height in a street canyon in downtown Rome. The same Fin have been adopted to estimate indoor aerosol concentrations, due to the infiltration of outdoor particles and then the relevant daily respiratory doses. Aerosol concentrations at ground floor were more than double than at 20 m height and richer in ultrafine particles. Thus, although aerosol infiltration efficiency was on average higher at 20 m height than at ground floor, particles more abundantly infiltrated at ground level. On a daily basis, this involved a 2.5-fold higher dose at ground level than at 20 m height. At both levels, such doses were greater than those estimated over the period of activity of some indoor aerosol sources, therefore they represent an important contribution to the total daily dose.

During the period of health emergency linked to the current COVID-19 pandemic, the management of children's oral health presents specific problems related to the infectious spread of the disease. These problems must be faced on the one hand by acting on the oral health prevention methods, and on the other by implementing specific protocols relating both to the conditions of oral pathologies that normally do not represent an emergency, and to those clinical situations that fall into the category of pediatric dental emergencies. In this perspective, in addition to defining rigorous and highly effective infection control protocols in the dental settings, it is of fundamental importance to work on remote communication and education aimed at maintaining the oral health of the children. This article, after an analysis of the risk factors from COVID-19 associated with pediatric dental treatment, presents a series of considerations on potential oral prevention strategies and on the management of emergency and non-emergency dental procedures in a context of disease transmission control, proposing new approaches and models of treatment based also on remote interaction techniques which will then retain their usefulness even at the end of the current emergency period.

The alteration of the delicate balance that regulates the secretion and distribution of the tear film determines the dry eye (DE) syndrome, because the tear film represents the interface between the eye and the environment. Despite having a multifactorial origin, the main risk factors for the emergence of the ocular disease are female gender and advanced age. Likewise, morphological changes in several glands and in chemical composition of their secretions such as proteins, mucins, lipidics, aqueous tears, and salinity, are highly relevant factors to maintain a condition of good health of the ocular anterior segment. Another key factor of recurrence and onset of the disease is the presence of local and/or systemic infiammation that reflex on the ocular surface. However, it is one of the most commonly encountered disease in clinical practice and many other causes related to daily life and to lengthen the average life will contribute to the beginning. This review will consider how and what disorders of the ocular surface are responsible for a widespread pathology so. In the end, the most appropriate and new therapies will be briefly exposed according to the specific pathology.

The COVID-19 pandemic has severely tested the physical and mental health of health care workers (HCWs). The various stages of the epidemic have posed different problems; consequently, only a prospective study can effectively describe the changes in the workers’ health. This repeated cross-sectional study is based on a one-year investigation (spring 2020 to spring 2021) of intensive care physicians in one of the two COVID-19 hub hospitals in Central Italy. Changes in their work activity due to the pandemic were studied anonymously together with their perception of organizational justice, occupational stress, sleep quality, anxiety, depression, burnout, job satisfaction, happiness, and intention to quit. In May-June 2021, one year after the baseline, doctors reported an increased workload, isolation at work and in social life, lack of time for physical activity and meditation and compassion fatigue. Stress was inversely associated with the perception of justice in safety procedures and directly correlated with work isolation. Occupational stress was significantly associated with anxiety, depression, burnout, dissatisfaction, and intention to quit. Procedural justice was significantly associated with happiness. Doctors believed vaccinations would help control the problem; however, this positive attitude had not yet resulted in improved mental health. Doctors reported high levels of distress (73%), sleep problems (28%), anxiety (25%), depression (64%). Interventions to correct the situation are urgently needed.

The Covid-19 pandemic has severely tested the mental health of frontline health care workers. A repeated cross-sectional study can provide information on how their mental health evolved during the various phases of the pandemic. The intensivists of a COVID-19 hub hospital in Rome were investigated with a baseline survey during the first wave of the pandemic in April 2020 and were contacted again in December 2020, during the second wave. 152 of the 205 eligible workers responded to an online questionnaire designed to measure procedural justice, occupational stress (effort/reward imbalance), sleep quality, anxiety, depression, burnout, job satisfaction, happiness, and turnover intention. Workers reported a further increase in workload and compassion fatigue, which had already risen during the first wave, and a marked reduction in the time devoted to meditation and mental activities. A low level of confidence in the adequacy of safety procedures and the need to work in isolation, together with an increased workload and lack of time for meditation were the most significant predictors of occupational stress in a stepwise linear regression model. Occupational stress was, in turn, a significant predictor of insomnia, anxiety, low job satisfaction, burnout, and intention to leave the hospital. The number of workers manifesting symptoms of depression increased significantly to exceed 60%. Action to prevent occupational risks and enhance individual resilience cannot be postponed.

Blockchain is a data management innovation that allows the linkage of successive records regarding a digital entity, and to store them into a shared, decentralized, distributed and retroactively unchangeable data structure. Each bit of information related to the recorded events contains the public key of the owner, therefore, the whole record is formed by a chain of transactions with blocks of information identifying where the transaction was generated from and its current destination (Nakamoto, 2008). Blockchain is the technology behind Bitcoin, an online currency that was first introduced in 2009. The technology makes it possible to conduct business between members within the network without relying on third parties as guarantors to prove transaction integrity, thus increasing speed and reducing cost of transaction. Moreover, the transparency posed by the technology makes it possible to trace goods and services through all stages, making the technology a unique tool that can be assimilated by, for example, the Agro-food supply chain systems. Specifically, Blockchain is being tested in a pilot project in the UK meat (Beef) industry by the FSA (Food Standards Agency) and the slaughterhouses, with IBM Blockchain platform to ensure full transparency and compliance with regulations, (Evenstad, 2018). However, the uptake of Blockchain in the fresh produce (fresh and fresh, short-life processed fruit, vegetables, salads) supply chain is lagging, in the United Kingdom, and remains untested and limited to literature, models and specific case studies in the United States of America and France. The study aims at understanding how prepared stakeholders are in adopting Blockchain for their operations. An inductive qualitative method was employed through non-structured interviews with three companies and one consumer focus group. The interviews were guided by seven (7) open-ended questions, which were unstructured. The collected data was analyzed with axial coding through constant comparative methods. Seven (7) themes were identified as factors influencing the adoption of Blockchain in the fresh produce supply chain in the UK. These are, novelty of the technology, complexity of the fresh produce supply chain in UK, level of product transformation, technological compatibility with operations, cost and value, Customer (retailer) push for adoption, and public/consumers opinion. The adaptation of Blockchain by the current fresh produce supply chain in the UK and the EU at large will come about when concerns on Novelty, and complexity of supply chain systems are fully addressed.

The province of Macerata, Italy, is a topographically complex region which has been little studied in terms of its temperature and precipitation climatology. Temperature data from 81 weather stations and precipitation data from 55 rain gauges were obtained, and, following quality control procedures, were investigated on the basis of 3 standard periods: 1931-1960, 1961-1990 and 1991-2014. Spatial and temporal variations in precipitation and temperature were analysed on the basis of six topographic variable (altitude, distance from the sea, latitude, distance from the closest river, aspect, and distance from the crest line). Of these, the relationship with altitude showed the strongest correlation. Use of GIS software allowed investigation of the most accurate way to present interpolations of these data and assessment of the differences between the 3 investigated periods. The results of the analyses permit a thorough evaluation of climate change spatially over the last 60 years. Generally, the amount of precipitation is diminished while the temperature is increased across the whole study area, but with significant variations within it. Temperature increased by 2 to 3°C in the central part of the study area, while near the coast and in the mountains the change is between about 0 and 1°C, with small decreases focused in the Appennine and foothill belt (-1 to 0°C). For precipitation, the decrease is fairly uniform across the study area (between about 0-200 mm), but with some isolated areas of strong increase (200-300 mm) and only few parts of territory in which there is an increase of 0-200 mm, mainly in the southern part of the coast, to the south-west and inland immediately behind the coast. The monthly temperature trend is characterized by a constant growth, while for precipitation there is a strong decrease in the amount measured in January, February and October (between 25 and 35 mm on average).

We report the electrical characterization and the field emission properties of CVD-grown MoS₂ bilayers deposited on SiO₂/Si substrate. Current-voltage characteristics are measured in the back-gate transistor configuration, with Ti contacts patterned by electron beam lithography. We confirm the n-type character of as-grown MoS₂ and we report normally-on field effect transistors. Local characterization of field emission is performed inside a scanning electron microscope chamber with piezo-controlled tungsten tips working as the anode and the cathode. We demonstrate that an electric field of ~200 V/μm is able to extract current from the flat part of MoS₂ bilayers, which therefore can be conveniently exploited for field emission applications even in low field-enhancement configurations. We show that a Fowler-Nordheim model, modified to account for electron confinement in 2D materials, fully describes the emission process.

This study investigates the impact of vertical greenery systems (VGS) applied to heavyweight walls on indoor thermal conditions in a building module situated in the Mediterranean climate of Catania, Italy. Using dynamic simulations in TRNSYS, the research compares the thermal behavior of walls constructed from hollow clay blocks (Poroton) and lava stone blocks with a lightweight wall setup already in place at the University of Catania. The primary focus is on evaluating the VGS’s effect on reducing peak inner surface temperatures and moderating heat flux fluctuations entering the building. The findings indicate that adding a vertical greenery layer to heavyweight walls can decrease the peak inner surface temperature by up to 1.0°C compared to the same wall without vegetation. However, the greenery’s impact on mitigating heat flux fluctuations is less pronounced than in the case of the lightweight wall. This research underscores the potential of green facades in enhancing indoor thermal comfort in regions with climates similar to the Mediterranean, providing valuable insights for sustainable building design and urban planning.

(1) Background: Mobile health (mHealth) solutions can become means of improving functional recovery and reducing the peri-operative burden and costs associated with arthroplasty procedures. Aim of this study is to explore the objectives, functionalities, and outcomes of a platform designed to provide personalized surgical experiences to qualified patients, along with the associated problems and opportunities. (2) Methods: A survey-based analysis was conducted on patients who were prescribed the use of a specific care management platform and underwent primary Robotic total knee arthroplasty (rTKA) between January 2021 and February 2023. (3) Results: Patients registered on the platform who have undergone primary Robotic TKA (rTKA) were considered. The mean age of registered patients is 68,6 years. The male (M) / female (F) ratio is 45.1% / 54.9%. The patients interviewed were at an average distance of 485 days from the intervention, with a standard deviation of 187.5. The survey highlighted appreciation for the App and its features but limits in its use and in its perception from the patients. All these data were evaluated according to the Wald principles and strategies to improve patient recruitment, enhance adherence, and create a comprehensive patient journey for optimized surgical experiences were analyzed. (4) Conclusions: This patient care platform may have the potential to impact surgical experiences by increasing patient engagement, facilitating remote monitoring, and providing personalized care. There is the need to emphasizes the importance of integrating the recruiting process, improving adherence strategies, and creating a comprehensive patient journey within the platform

The prevalence of food allergy has increased over the last decades and consequently the food labeling policies have improved over the time in different countries to regulate allergen presence in foods. In particular, Reg 1169 in EU mandates the labelling of 14 allergens whenever intentionally added to foods, but the inadvertent contamination by allergens still remains uncovered topic. In order to warn consumers on the risk of cross-contamination occurring in certain categories of foods, a precautionary allergen labelling system has been put in place by food industries on voluntary basis. In order to reduce the overuse of PAL, reference doses and action limits have been proposed by the VITAL project representing a guide in this jeopardize scenario. Development of sensitive and reliable mass spectrometry methods are therefore of paramount importance in this regard to check the contamination levels in foods. In this paper we describe the development of a managed time MRM method based on a triple quadrupole platform for milk and egg quantification in processed food. The method was in house validated and allowed to achieve levels of proteins lower than 0.2mg of total milk and egg proteins respectively in cookies, challenging the doses recommended by VITAL. The method was finally applied to cookies labeled as milk and egg-free. This method could represent in perspective a promising tool to be implemented along the food chain to detect even tiny amounts of allergens contaminating food commodities.

Nutrition is crucial for the management of patients affected by chronic kidney disease (CKD) to slow down disease progression and to correct symptoms. The mainstay of the nutritional approach to renal patients is protein restriction coupled with adequate energy supply to prevent malnutrition. However, other aspects of renal diets, including fiber content, can be beneficial. This paper summarizes the latest literature on the role of different types of dietary fiber in CKD, with special attention to intestinal microbiota and the potential protective role of renal diets. Fibers have been identified based on aqueous solubility, but other features, such as viscosity, fermentability, and bulking effect in the colon should be considered. A proper amount of fiber should be recommended not only in the general population but also in CKD patients, to achieve an adequate composition and metabolism of intestinal microbiota and to reduce the risks connected with obesity, diabetes, and dyslipidemia.

(1) Background: Newer generation ophthalmologists practicing in the developed world are not very familiar with some tropical ocular diseases due to the absence of reports in the ophthalmic literature over the past thirty years. Because of world globalization or due to influx of immigrants from Sub Saharan Africa, exotic retinal diseases are being encountered more often in ophthalmology clinics; (2) Methods: Case series of chorioretinitis or optic neuritis with obscure etiology; (3) Results: 4 cases qualified with the diagnosis of ocular onchocerciasis based on their residence near fast rivers in endemic areas, multimodal imaging, long term follow-up showing progressive disease and negative workup for other diseases. Characteristic findings include peripapillary choroiditis with optic neuritis or atrophy, subretinal tracts of the microfilaria, progressive RPE atrophy around heavily pigmented multifocal chorioretinal lesions of varying shapes and subretinal white or crystalline dots. Typical skin findings are often absent in eyes with chorioretinitis rendering the diagnosis more challenging; (4) Conclusions: Familiarity with the myriad ocular findings of onchocerciasis, and a high degree of suspicion in subjects residing in endemic areas can help in the correct diagnosis and implementation of appropriate chemotherapy. Onchocercid chorioretinitis is a slow insiduous progressive and prolonged polymorphous disease.

This paper explores strategies for fostering efficient vocal communication and collaboration between human workers and collaborative robots (cobots) in assembly processes. Vocal communication enables division of attention of the worker, as it frees the visual attention, and the worker’s hands, dedicated to the task at hand. Speech generation and speech recognition are pre-requisites for effective vocal communication. The study focuses on cobot assistive tasks, where the human is in charge of the work and performs the main tasks while the cobot assists the worker in various peripheral jobs, such as bringing tools, parts, or materials, and returning them, or disposing them; or screwing or packaging the products. A nuanced understanding is necessary for understanding how human-robot interactions can be optimized to enhance overall productivity and safety. Through a comprehensive review of relevant literature and empirical studies, this manuscript identifies key factors influencing successful vocal communication, and proposes practical strategies for implementation.

This study aimed to evaluate whether primary school classroom teachers reported changes in physical education teaching self-efficacy (SE-PE) and work engagement (WE) during the first COVID-19 wave. Six-hundred-twenty-two classroom teachers filled in an online questionnaire on SE-PE and WE, referring to before and during the lockdown, and on perceived digital competence. While controlling for perceived digital competence, a mixed between-within Repeated Measures Multivariate Analysis of Covariance (RM-MANCOVA) was performed, with a two-time (before vs. during the lockdown) and three age-categories (≤40 vs. 41-50 vs. ≥51 years) factorial design. The RM-MANCOVA revealed that perceived digital competence significantly adjusted teachers’ SE-PE and WE values (p&lt;0.001). The analysis yielded a significant multivariate main effect by time (p&lt; 0.001) and by time × age-categories (p=0.001). Follow-up univariate ANCOVA showed significant differences by time in teachers’ SE-PE (p&lt;0.001) and WE (p &lt; 0.001), with a reduction of both values from before to during the lockdown. A Bonferroni post hoc pairwise comparisons showed teachers’ SE-PE significantly decreased in all age categories (p&lt;0.001). The present findings confirm the importance of promoting SE-PE among primary school teachers, regardless of the crisis due to the COVID-19 pandemic. Teachers’ self-efficacy and WE are essential to master the challenges of PE teaching.

Alloy 800H stands as one of the few code qualified materials for fabricating in core and out of core components operating in high temperature reactors (HTRs). Welding is a common practice for assembling these components, however, the election of a suitable filler material is essential to enhance the high-temperature creep resistance of Alloy 800H weldments in high temperature applications. In this study, Inconel 625 and Haynes 230 filler material were used to weld the Alloy 800H plates employing the Gas Tungsten Arc Welding (GTAW) technique. The high temperature tensile, creep rupture property, microstructural stability and evolution of the weldments after high temperature exposure were investigated and compared with Alloy 800H. The results showed that the both weldments exhibited enhanced tensile and creep behavior at 760 oC. The creep rupture time of the weldments with Inconel 625 filler and Haynes 230 filler materials was about two and three time longer than that of Alloy 800H base metal when tested at 80 MPa and 760 oC, respectively. Carbides (MC and M23C6) were commonly observed in the microstructure of both the weld and base metals in the two weldments after high temperature creep tests. However, the Inconel 625 filler weldment displayed detrimental δ and Laves phase in the fusion zone and these precipitates could be potential sites for initiating cracks following prolonged high temperature exposure. The study showed that the weldment with Haynes 230 exhibited better phase stability and creep rupture property than the one with Inconel 625 filler material, suggesting its potential as a candidate filler material for Alloy 800H for further investigation. The finding also emphasizes the critical consideration of microstructural evolutions and phase stability in evaluating high temperature materials and their weldments in high temperature reactor applications.

Background. This study compares the short- and long-term effectiveness and safety of pramipexole augmentation (PA) and aripiprazole augmentation (AA) for unipolar treatment-resistant depression (TRD). Methods. Patients were recruited in a private out-patients clinic specialized in mood disorders. At intake and at each visit depressive and (hypo)manic symptoms, clinical status, and level of functioning were evaluated with appropriate scales. The trend of outcomes was analyzed using mixed-effect linear regression models. Results. The study includes 81 unipolar TRD patients treated with PA and 51 with AA. After 12 and 24 weeks of treatment with PA, the predicted response (64.1% and 76.2%) and remission rates (49.7% and 72.7%) were significantly higher than the predicted response (32.2% and 38.0%) and remission rates (18.9% and 28.1%) for AA. The improvement in psychosocial functioning was significantly greater and faster in PA than in AA. PA showed significant superiority over AA as a maintenance strategy (time spent ill and psychosocial functioning) up to 12 months. No difference in safety was found at each time point. Conclusions. PA could be an alternative option for short and long-term treatment of unipolar TRD, more effective and similar in safety with AA. These preliminary results need confirmation from randomized clinical trials.

Finished tanned leather are usually covered by a thin polymeric layer. This layer has the scope to change the morphological aspect of the last leather layer, as well as to improve the impermeabilization properties. Often, the finished product is refused by the final client and tanneries must restore significant quantity of materials. Therefore, it is very important to remove this finished polymeric layer, to recover the underneath tanned leather and to predispose it to a new finishing. The bonding between the polymeric film and leather is so strong that, today, only a blade shaving process can perform this separation at the expenses of also removing a layer of tanned leather and consequently reduce the leather thickness. Here, a novel separation method was developed, based on the significant difference in the dilation properties between the tanned hide and the polymeric film at low temperature. The use of cryogenic fluids, in particular the direct application of liquid nitrogen, can freeze the polymeric layer under the glass transition temperature and then inducing a brittle behaviour. The result is an easy separation without any alteration of the tanned leather layer. Thus, the process here developed, allows the reuse of the tanned leather towards a new life in the respect of the circular economy principles.

Background: allergic diseases and, in particular food allergy (FA), have been identified as one of the major diseases in the world. The first 1000 days of life can be a “window of opportunity” or a “window of susceptibility” during which several factors can predispose children to FA development. Changes in gut microbiota composition, from pregnancy to infancy, could have a pivotal role in this regard: some bacterial genus such as Lactobacillus or Bifidobacterium seem to be protective from FA development, on the contrary Clostridium and Staphylococcus appear to be unprotective. Methods: we conducted a research through the most recent literature (2013-2023), using Pubmed and Scopus as databases. We included English original papers, clinical trials, metanalysis and reviews. Case reports, series and letters have been excluded. Results: during pregnancy, maternal diet can play a fundamental role in influencing gut microbiota composition of newborns. After birth, human milk can promote the development of protective microbial species by human milk oligosaccharides (HMOs), that play a prebiotic role. Also complementary feeding can modify gut microbiota composition. Conclusions: the first two years of life are a critical period where several factors, in genetic predisposed children, can increase the risk of FA development.

Tracking information diffusion is a non-trivial task and it has been widely studied across different domains and platforms. The advent of social media has led to even more challenges, given the higher speed of information propagation and the growing impact of social bots and anomalous accounts. Nevertheless, it is crucial to derive a trustworthy information diffusion graph, which is capable of highlighting the importance of specific nodes in spreading the original message. The paper introduces the interaction strength, a novel metric to model retweet cascade graphs by exploring users’ interactions. Initial findings show the soundness of the approaches based on this new metric with respect to the state-of-the-art model, and its ability to generate a denser graph, revealing crucial nodes that participated in the retweet propagation. Reliable retweet graph generation will enable a better understanding of the diffusion path of a specific tweet.

Steel reinforcement in concrete has the tendency to corrode and this process can lead to structural damage. FRP reinforcement represents a viable alternative for structures exposed to aggressive environments and has many possible applications where superior corrosion resistance properties are required. The use of FRP rebars as internal reinforcements for concrete, however, is limited to specific structural elements and does not yet extend to the whole structure. The reasons for this relate to the limited availability of curved or shaped reinforcing elements on the market and their reduced structural performance. Various studies, in fact, have shown that the mechanical performance of bent portions of composite bars is reduced significantly under a multiaxial combination of stresses and that the tensile strength can be as low as 25% of the maximum tensile strength that can be developed in the straight part. In a significant number of cases, the current design recommendations for concrete structures reinforced with FRP, however, were found to overestimate the bend capacity of FRP rebar. This paper presents the state-of-the art review of the research works on the strength degradation in curved FRP composites and highlighted the performance of exiting predictive models for the bend capacity of FRP reinforcement. Recent practical predictive model based on the Tsai-Hill failure criteria by considering the material at marcromechanical level is also discussed and highlighted. The review also identifies the challenges and highlights the future directions of research to explore the use of shaped FRP composites in civil engineering applications and the trends for future research in this area.

This paper presents the design, fabrication and characterization of Schottky erbium/silicon photodetectors working at 1.55 µm. These erbium/silicon junctions are carefully characterized using both electric and optical measurements at room temperature. A Schottky barrier ΦB of ~673 meV is extrapolated; the photodetectors show external responsivity of 0.55 mA/W at room temperature under a 8 V of reverse bias applied. In addition, the device performance is discussed in terms of normalized noise and noise equivalent power. To the best of our knowledge, these are the first Er/Si photodetectors designed for operation in free space at 1.55 µm. The proposed devices will pave the way towards development of Er-based photodetectors and light sources to be monolithically integrated in the same silicon substrate and both operating at 1.55 µm.

“Pecorino” is a typical semi-hard cheese obtained with raw or heat-treated sheep milk using procedures to valorize the raw material's chemical and microbiological properties. In the present study, using a high throughput method of 16S rRNA gene sequencing, we assessed the evolution of the microbiome composition from milk to Pecorino cheese in artisanal processes using milk from Comisana and Lacaune sheep breeds. The comparative analysis of the bacterial com-munity composition revealed significant differences in the presence and abundance of specific taxa in the milk microbiome of the Comisana and Lacaune breeds. NGS analysis also revealed differences in the curd microbiome related to dairy farming practices, which have a relevant effect on the final structure of the Pecorino-cheese microbiome.

Lower urinary tract symptoms (LUTS) and hematuria are common symptoms in men with benign prostatic hyperplasia (BPH) and prostate cancer (PCa) mainly affecting the elderly population. Prostatic arterial embolization (PAE) is a minimally invasive pro-cedure that has shown promising results in managing massive intractable prostatic he-maturia in patients with BPH and PCa. A few studies, however, have provided valuable insights into the durability and efficacy of PAE focusing on the long-term effectiveness, quality of life, and cancer-specific control of hemostasis and urinary symptoms. As a result of concomitant cardiovascular conditions, these patients often take anticoagulants or antithrombotics, which can worsen their hematuria and clinical status. Transurethral resection of the prostate (TURP) is considered a very high-risk procedure even without massive bleeding, and requires discontinuation of Vitamin K antagonists and antiplate-let therapies. Such patients usually have their surgery postponed, and PAE should be considered a safe alternative treatment. We aimed to report a narrative review from 1976 to June 2023 of the current state of PAE for massive and intractable hematuria highlighting recent developments in this technique, including prospective cohort stud-ies and focusing on long-term outcome, safety, and complication management in PCa patients with significant hemorrhagic symptoms. As an additional contribution, we propose a simple algorithm for treating intractable bleeding associated with prostate cancer in a 92-year-old man with LUTS.

Starting from early 2020, the COVID-19 pandemic has caused a morbidity and mortality excess worldwide. Containment strategies rely firstly on rapid and sensitive laboratory diagnosis with molecular detection of the viral genome in respiratory samples being the gold standard. Reliability of diagnostic protocols could be affected by SARS-CoV-2 genetic variability. In fact, mutations occurring during SARS-CoV-2 genomic evolution can involve the regions targeted by the diagnostic probes. Following a review of the literature and an in silico analysis of the most recently described virus variants (including the UK B 1.1.7 and the South Africa 501Y.V2 variants), we conclude that the described genetic variability should have minimal or no effect on the sensitivity of existing diagnostic protocols for SARS-CoV-2 genome detection. However, given the continuous emergence of new variants, the situation should be monitored in the future, and protocols including multiple targets should be preferred.

In recent years, increasing attention has been paid to individuals organizing themselves and managing food systems in an ‘alternative’ and more sustainable way. Such emerging food initiatives are most commonly known as ‘Alternative Food Networks’ (AFNs). However, there is an ongoing debate concerning the extent to which AFNs facilitate social, economic and environmental change. There are criticisms of the overall sustainability promise of AFNs related to sufficiency of impact, possible counter effects and relevance of impacts. Because often empirical studies only focus on specific sustainability issues or AFNs, it has been difficult to develop more robust theories about the relations between diverse AFNs arrangements and sustainability. Thus, the aim of this paper is to contribute towards reducing this knowledge gap through a systematic literature review on AFNs in relation to sustainability. We summarize main methodological approaches, types of AFNs studied and sustainability dimensions addressed in literature to date. Findings serve as reference to propose opportunities for future research regarding sustainability in AFNs.

We consider a random dynamical system arising in a model of associative memory. This system can be seen as a small (stochastic and deterministic) perturbation of a determinstic system having two weak attractors which are destroyed after the perturbation. We show, with a computer aided proof, that the system has a kind of chaotic itineracy. Typical orbits are globally chaotic, while they spend relatively long time visiting attractor's ruins.

Distinctive strains of Pantoea are used as soil inoculants for their ability to promote plant growth. Pantoea agglomerans strain C1, previously isolated from the phyllosphere of lettuce, can produce indole-3-acetic acid (IAA), solubilize phosphate, and inhibit plant pathogens, such as Erwinia amylovora. In this paper, the complete genome sequence of strain C1 is reported. In addition, experimental evidence is provided on how the strain tolerates arseniate up to 100 mM, and on how secreted metabolites like IAA and siderophores act as biostimulants in tomato cuttings. The strain has a circular chromosome and two prophages for a total genome of 4,846,925-bp, with a GC content of 55.2%. Genes related to plant growth promotion and biocontrol activity, such as those associated with IAA and spermidine synthesis, solubilization of inorganic phosphate, acquisition of ferrous iron, and production of volatile organic compounds, siderophores and GABA, were found in the genome of strain C1. Genome analysis also provided better understanding of the mechanisms underlying strain resistance to multiple toxic heavy metals and transmission of these genes by horizontal gene transfer. Findings suggested that strain C1 exhibits high biotechnological potential as plant growth-promoting bacterium in heavy metal polluted soils.

This systematic literature review explores the burgeoning use of Artificial Intelligence (AI) in manufacturing systems, in line with the principles of Industry 4.0 and the growth of smart factories. In this landscape, AI is crucial in addressing the complexity and dynamism of contemporary manufacturing processes, including machine breakdowns, fluctuating orders and unpredictable job arrivals. This systematic literature review, conducted using the Scopus database and bibliometric tools, pursues two primary objectives. First, it identifies the prevailing trends in solving scheduling problems with AI and identifies the most commonly used AI techniques in the literature. Secondly, it analyses how authors have successfully employed AI to address production scheduling challenges in real-world industrial settings and assesses the benefits obtained by companies. The dynamic nature of manufacturing systems requires adaptive scheduling paradigms. AI, including Particle Swarm Optimization, Neural Networks, and Reinforcement Learning, is applied to optimize production processes, predict machine failures, and achieve substantial benefits. In real-world applications, these AI-driven solutions have led to reduced production costs, enhanced energy efficiency, and more efficient scheduling processes. AI is increasingly recognized as an essential tool in addressing the evolving challenges of modern manufacturing environments.

Numerous new technologies have been implemented in image analysis methods that help researchers withdraw scientific conclusions from biological phenomena. Plants of the family Lemnaceae (duckweeds) are the smallest flowering plants in the world, and biometric measurements of single plants and their growth rate are highly challenging. Although the use of software for digital image analysis has changed the way scientists extract phenomenological data (also for studies on duckweeds), the procedure is often not wholly automated and sometimes relies on the intervention of a human operator. Such a constraint can limit the objectivity of the measurements and generally slows down the time required to produce scientific data. Here is the need to implement image analysis software with artificial intelligence that can substitute the human operator. In this paper, we present a new method to study the growth rates of the plants of the Lemnaceae family based on the application of machine learning procedures to digital image analysis. The method is compared to existing analogical and computer-operated procedures. Results showed that our method drastically reduces the time consumption of the human operator while retaining a high correlation in the growth rates measured with other procedures As expected, machine learning methods applied to digital image analysis can overtake the constraints of measuring growth rates of very small plants and might help duckweeds gain worldwide attention thanks to their great nutritional qualities and biological plasticity.

Background: Drought, N deficiency and herbivory are considered the most important stressors caused by climate change in the agro- and eco-systems and varied in space and time shaping a highly dynamic and heterogeneous stressful environments. This study aims to evaluate the to-mato morpho-physiological and metabolic responses to combined abiotic and herbivory at dif-ferent within-plant spatial levels and temporal scales. Methods: Leaf-level morphological, gas exchange traits and VOC profiles were measured in to-mato plants exposed to N deficiency and drought, T. absoluta larvae and their combination. Ad-ditive, synergistic or antagonistic effects of the single stress when combined were also evaluat-ed. Morpho-physiological traits and VOC profile were also measured on leaves located at three different positions along the shoot axes. Results: The combination of the abiotic and biotic stress has been more harmful than single stress with antagonistic and synergistic but non-additive effects for the morpho-physiological and VOC tomato responses, respectively. Combined stress also determined a high within-plant phenotypic plasticity of the morpho-physiological responses. Conclusions: These results suggest that the combined stress in tomato determined a “new stress state” and a higher within-plant phenotypic plasticity which could permit an efficient use of the growth and defence resources in the heterogeneous and multiple stressful environmental condi-tions.

Adolescence is a central phase for the development of a person’s identity involving complex multidimensional changes and increasing vulnerability to distress. The aim of this study was to investigate the psychological well-being of adolescent students in Brescia (Northern Italy), two years after the beginning of the Covid-19 pandemic. An online survey investigated the extent and the reasons reported by high school students for their emotional distress (ED), also considering other factors such as physical activity, diet, sleep and smartphone overuse. The main reasons for ED were classified through a qualitative analysis of the freetext answers. 1686 students agreed to participate, 50% showed a presence of ED. According to a multiple logistic analysis, the main factors associated to ED were female gender (AdjOR 2.3, p<0.0001), age (AdjOR 1.6, p<0.0001), sleep duration <8 hours (AdjOR 1.5, p=0.0003), anxiety perception (AdjOR 3.4, p<0.0001), and certain eating behaviors, e.g. comfort food consumption (AdjOR 2.0, p<0.0001). According to free-text answers, the main reasons for ED were: “school pressure”, “ relationships with family and peers”, “negative emotional states” and “the pandemic”. The results show a high level of ED among adolescents and the reported reasons may help to better address their psychological needs after the pandemic.

Goal of this article is to provide the numerical and experimental assessments of an effective near-field to far-field transformation (NF–FF T) technique with planar spiral scanning for flat antennas under test (AUTs), which requires a non-redundant, i.e. minimum, amount of NF measurements. This technique has its roots in the theory of non-redundant sampling representations of electromagnetic fields and has been devised by suitably applying the unified theory of spiral scans for non-volumetric antennas to the case in which the considered AUT is modeled by a circular disk having its radius equal to one half the AUT maximum dimension. It makes use of a 2-D optimal sampling interpolation (OSI) formula to accurately determine the massive NF data required by the classical plane-rectangular NF–FF T technique from the non-redundant ones gathered along the spiral. It must be emphasized that, when considering flat AUTs, the developed transformation allows to further and significantly save measurement time as compared to that needed by the previously developed NF–FF T techniques with planar spiral scans based on the quasi-planar antennas modelings, because the number of turns of the spiral and that of NF data to be acquired depend somehow on the area of the modeling surface. The reported numerical simulations assess the accuracy of the proposed NF–FF T technique, whereas the experimental tests prove its practical feasibility.

In this work we present a versatile, rapid, and low-cost manufacturing technique to develop bioceramic scaffolds that could enhance bone tissue regeneration via microwave preparation using a commercial microwave oven. The scaffolds were prepared combining hydroxyapatite and water glass (sodium trisilicate solution), foamed by using a microwaves oven and then characterized by means of SEM-EDS, mechanical properties, infrared spectroscopy (ATR-FTIR), density and stability test in water. Furthermore, in vitro tests were performed to verify the affinity of osteoclast cells versus the so prepared scaffold. The morphology of the samples showed interconnected pores suitable for promoting tissue regeneration and vascularization while specific mechanical properties were preserved. The physicochemical characterization and the in vitro tests presented promising results for bone regenerative applications.

In this paper we report on the use of an in-house developed solid-state hybrid microwave and radiofrequency generator operating at frequencies of 2.45 GHz and/or 480 kHz for cancer ablation in various tissues. The generator has demonstrated increased accuracy due to its custom-designed hardware, which incorporates the latest technologies and algorithms to control the emitted power versus temperature profile of the treated sample. In particular, the hybrid generator incorporates control systems based on impedance or reflected power measurements that allow controlled ablation without causing unwanted carbonisation and without including areas where tissue damage is not desired. Tests performed ex-vivo on chicken breast and bovine liver show that radiofrequency ablation (RFA) is very effective for performing controlled ablations with minimally invasive probes, such as cardiac pathologies, small lesions, tissues with particular composition, while microwave ablation (MWA) is optimal for performing large ablations in highly vascularised tissues, such as liver cancer, where it is necessary to achieve higher temperatures.

In this research, univariate and bivariate statistical methods were applied to rainfall, river and piezometric level datasets belonging to 24 years long time series (1986-2009). These methods, that often are used to understand the effects of precipitation on rivers and karstic springs discharge, have been used to assess, piezometric level response to rainfall and river level fluctuations in a porous aquifer. A rain gauge, a river level gauge and three wells, located in Central Italy along the lower Pescara river valley in correspondence of its important alluvial aquifer, provided the data. The statistical analysis has been used within a known hydrogeological framework, which has been refined by mean of a photo-interpretation and a GPS survey. Water-groundwater relationships were identified following the autocorrelation and cross-correlation analyses; the spectral analysis and mono-fractal features of time series were assessed, in order to provide information on multy-year variability, data distributions, their fractal dimension and the distribution return time within the historical time series. The statistical-mathematical results were interpreted through field work that identified distinct groundwater flowpaths within the aquifer and enabled the implementation of a conceptual model, improving the knowledge on water resources management tools.