PirAB is a binary protein complex secreted by specific strains of Vibrio parahaemolyticus (Vp) that harbor the pVA1 virulence plasmid and express PirAVp and PirBVp toxins. PirABVp causes acute hepatopancreatic necrosis disease (AHPND), a newly emergent penaeid shrimp disease that can cause 70–100% mortality and has resulted in great economic losses since its appearance. The cy-totoxic effect of PirABVp on the epithelial cell of the shrimp hepatopancreas has been extensively reported. Our studies found that the PirBVp subunit has lectin activity and recognizes mucin-like O-glycosidic structures in the shrimp hepatopancreas. The PirAVp subunit may have a stabiliza-tion function of the binary complex. However, we also found that Vp AHPND changes the water microbiota community structure and causes a significant reduction in several bacteria, especially Neptuniibacter spp. We propose that the PirABvp toxin could exhibit a dual role: damage the shrimp hepatopancreas and kill surrounding bacteria.

The agricultural sector is undergoing a revolution that requires sustainable solutions to the challenges that arise from traditional farming methods. To address these challenges, technical and sustainable support is needed to develop projects that improve crop performance. This study focuses on the onion crop and the challenges presented throughout its phenological cycle. Aerial monitoring using unmanned aerial vehicles (UAV) and digital image processing were used to identify patterns in the onion crop, including humid areas, weed growth, vegetation deficits, and decreased harvest performance. An algorithm was developed to identify the patterns that most affected crop growth, as the average local production reported was 40.166 ton/ha, but only 25.00 ton/ha was reached due to blight caused by constant humidity and limited sunlight. This resulted in the death of leaves and poor development of bulbs, with 50% of the production being of medium size. It is estimated that approximately 20% of the production was lost due to blight and unfavorable weather conditions.

Colombia is the world's leading producer of mild washed arabica coffee and produces 12.6 million bags of green coffee, but at the same time 784,000 tons of waste biomass are dumped in open fields, of which only 5% is recovered or used. The objective of this project was to evaluate the production of platform chemicals from these coffee wastes. To achieve this, biomass characterization was carried out using proximate analysis, ultimate analysis and structural analysis. Hydrothermal valorization was carried out at a temperature range of 120-180 °C (LHW) and 180-260 °C (HTC) for one hour, the platform chemicals obtained were quantified by HPLC-IR, monitored by pH and conductivity, and the solid fraction was characterized by monitoring the functional groups in IR spectroscopy, and elemental analysis. Hydrolysis processes were obtained from 150 °C, production of platform chemicals from 180 °C and maximum concentration at 180 °C-4h, over 200 °C degradation of the products in the liquid fraction starts to take place. Homogeneous basic and acid catalysts were used to improve the yields of the reaction. The kinetics of the hydrolysis of lignocellulosic structures to sugars were also analyzed and described, and reaction orders of 1 (LHW), 3 (HTC) and their respective reaction rate equations were reported.

There are currently around 78 Nuclear Power Plants (NPP) in the world based on Boiling Water Reactors (BWR). The current parameter to assess BWR instability issues is the linear Decay Ratio (DR). However, it is well known that BWRs are complex non-linear dynamical systems that may even exhibit chaotic dynamics that normally preclude the use of the DR when the BWR is working at a specific operating point during instability. In this work a novel methodology based on an adaptive Shannon Entropy estimator and on Noise Assisted Empirical Mode Decomposition variants is presented. This methodology was developed for real-time implementation of a stability monitor. This methodology was applied to a set of signals stemming from several NPPs reactors (Ringhals-Sweden, Forsmark-Sweden and Laguna Verde-Mexico) under commercial operating conditions, that experienced instabilities events, each one of a different nature

We assume that poetic devices have an implicit goal: producing an overall sound scheme that will induce the reader to associate intended and expressed meaning to the sound of the poem. Sounds may be organized into categories and assigned presumed meaning as suggested by traditional literary studies. In my work, I have extracted automatically the sound grids of all the sonnets by William Shakespeare and have combined them with the themes expressed by their contents. In a first experiment I have computed lexically and semantically based sentiment analysis obtaining an 80% of agreement. In a second experiment sentiment analysis has been substituted by Appraisal Theory thus obtaining a more fine-grained interpretation which in some cases contradicts the first one. The computation for the second poet - regarded by many critics the best of last century - includes both vowels and consonants. In addition, it combines automatic semantically and lexically based sentiment analysis with sound grids. The results produce visual maps that clearly separate poems into three clusters: negative harmony, positive harmony and disharmony where the latter instantiates the need by the poet to encompass the opposites in a desperate attempt to reconcile them.

Patients with degenerative diseases refer to feeling more pain during the night. However, it is unknown whether spinal nociception can be circadian and how is it controlled. We investigated whether the paw withdrawal threshold (PWT) could exhibit physiological circadian behavior as well as the contribution of the dopaminergic A11 nucleus and the spinal dopamine (DA) receptors (DRs) on the circadian PWT and the spinal clock gene transcription. Results revealed that control rats present a circadian PWT. Injecting 6-hydroxidopamine (6-OHDA) into the dopaminergic A11 nucleus reduced DA tissue content in the lumbar spinal cord, abolished the circadian PWT, induced allodynia, and reduced Period 1 and 2 (Per1 and 2), retinoid-related orphan receptor α (Rorα), Cryptochrome 1 (Cry1), and brain and muscle aryl-hydrocarbon receptor nuclear translocator-like protein (Bmal) mRNA. Likewise, administration of D1-like and D2-like DR antagonists blunted circadian PWT, producing allodynia, and altered the clock genes mRNA. In contrast, administration of D1-like or D2-like DR agonists blocked 6-OHDA-induced allodynia. This study shows that the spinal cord has physiological circadian PWT, which is modulated by the descending dopaminergic A11 through differential activation of the spinal DRs. Also, A11 nuclei and spinal DRs can regulate the clock gene transcription, which can likely modulate the circadian PWT.

Abstract: Background: Surgery on varicose veins (crossectomy and stripping) leads to recurrence and has clinical and socio-economic repercussions. Their etiopathogenesis has yet to fully under-stood. Objective: Study the expression of endoglin and other molecules involved in the neovascu-larisation process in patients suffering from this disease. Methods: 43 patients that have undergone surgery for varicose veins (24 primary and 19 recurrent). They were identified on the venous wall (proximal -saphenofemoral junction- and distal), via real-time RT-PCR, and in serum, via ELISA: Endoglin (Eng), Vascular Endothelial Growth Factor (VEGF-A), its receptors 1 and 2 (VEGFR1 or FLT1), (VEGFR2 or FLK), and the Hypoxia-Inducible Factor (HIF-1A). All the patients signed a con-sent form. Results: The recurrent group recorded a higher expression of Eng, VEGF-A, VEGFR1 and VEGFR2 at the level of proximal venous wall compared to the primary group. HIF-1A did not record any differences. As regards the determination of the distal venous wall, no markers recorded differ-ences between the groups. Among the serum determinations, only sFLT1 recorded a significant drop among the patients with recurrent varicose veins. Conclusions: Patients with recurrent vari-cose veins record a higher expression of endoglin and other markers of angiogenesis in proximal veins. Endoglin in the blood (sEng) has not proven to be of any use in recurrent varicose veins.

In this work, we report synthesis of Cu, Pt and Pd doped SnO₂ powders and their comparative CO gas sensing studies. Dopants were incorporated into SnO₂ nanostructures using chemical and impregnation methods by using urea and ammonia as precipitation agents. The synthesized samples were characterized using X-ray diffraction (XRD), Raman spectroscopy, Scanning electron microscopy (SEM) and High resolution transmission electron microscopy (HR-TEM). The presence of dopants within the SnO₂ nanostructures was evidenced from HR-TEM. Doped powders utilizing chemical methods with urea as precipitation agent presented higher sensitivities compared to the remaining, which is due to the formation of uniform and homogeneous particles resulted from the temperature assisted synthesis. The particle sizes of doped SnO₂ nanostructures were in the range of 40-100 nm. An enhanced sensitivity around 1783 was achieved with Cu doped SnO₂ when compared with two other dopants i.e., Pt (1200) and Pd: SnO₂(502). The high sensitivity of Cu: SnO₂ is due to formation of CuO and its excellent association and dissociation in the presence of CO with adsorbed atmospheric oxygen at sensor operation temperatures resulted in high conductance. Cu: SnO₂ may be an alternative and cost effective sensor for industrial applications.

We measure the accelerated cosmic expansion rate of the late-time Universe and derive constraints on cosmological parameters from the final baryon acoustic oscillation (BAO) uncorrelated measurements of different surveys after two decades of dedicated spectroscopic observation combined with the Pantheon sample of Type Ia supernovae, the Hubble diagram of gamma-ray bursts & quasars data, the Cosmic Chronometers data, and the recent Hubble constant value measurement from the Hubble Space Telescope and the SH0ES Team as an additional prior. In Λ cold dark matter (ΛCDM) scenario, the model fit yields Ωm=0.313±0.034 and ΩΛ=0.672±0.025. Combining BAO with CC+Pantheon+QSR+GRB data sets we get H0=69.21±1.22 km s−1 Mpc−1, rd=133.46±2.49 Mpc. For the a flat wCDM model, we get w=−1.111±0.030. For a dynamical evolution of dark energy in a flat w0waCDM cosmology, we get wa=−0.292±0.167. We apply the Akaike information criteria probe to compare the three models, and see that all models are favored and cannot be discarded from the current data.

Background: The presence of a leadership role in the nursing manager appears to be closely related to a positive and productive work environment within health settings. In some contexts, such as Mexico, the profile of the nursing manager has not been formally defined, and, sometimes those who occupy these positions do not always have sufficient training, and therefore this vocation, which is related to the social image of the nursing profession. This study aims to understand the influence of the vocation for leadership that the nursing manager has and how it can influence the work environment, through the analysis of experiences lived by health professionals with a management profile of different health environments; Methods: Qualitative study of an approximation to grounded theory using Corbin & Strauss as reference, using semi-structured individual interviews as a technique, and with the participation of 10 Mexican nursing managers from second-level care hospitals; Results: The meaning of the vocation for the interviewed managers is based in the first instance on the love of the profession and the vocation to be a nurse, then on the development of leadership for decision-making in practice and is fed back with the positive effects that it generates in the work environment, helping them to better organize human resources and professional activities, and strengthening themselves with specific training on the subject and the experience acquired. ; Conclusions: An understanding model is provided about the phenomenon where two central categories were identified, the first central category is the "Management vocation and natural nursing leadership" which is the basis; The second central category is the "Explanation and influence of the managerial vocation, natural leadership and work environment in nursing". Two connection categories were also created; the connection category one "Motives, meaning, and practical vocation of managerial nursing" and the connection category two "Description of the managerial vocation, natural leadership, and work environment", said connection categories emanate from the central category one, to connect with the central category two, which contains the interaction of the managerial vocation, natural leadership, and work environment in nursing.

Evolutionary psychology theories propose that contact with green, natural environments may benefit physical health, but little comparable evidence exists for brown, natural environments, such as the desert. In this study, we examined the association between “brownness” and “greenness” with fasting glucose among young residents of El Paso, Texas. We defined brownness as the surface not covered by vegetation or impervious land within Euclidian buffers around participants’ homes. Fasting glucose along with demographic and behavioral data was obtained from the Nurse Engagement and Wellness Study (N = 517). We found that residential proximity to brownness was not associated with fasting glucose when modeled independently. In contrast, we found that residential greenness was associated with decreased levels of fasting glucose, despite the relatively low levels of greenness within the predominantly desert environment of El Paso. A difference between the top and bottom greenness exposure quartiles within a 250 m buffer was associated with a 3.5 mg/dL decrease in fasting glucose levels (95% confidence interval: -6.2, -0.8). Our results suggest that within the understudied context of the desert, green vegetation may be health-promoting to a degree that is similar to other, non-desert locations in the world that have higher baselines levels of green.

Androgens are key for pubertal development of the mammalian testis, a phenomenon tightly linked to Sertoli cell maturation. In this review, we discuss how androgen signalling affects Sertoli cell function and morphology by concomitantly inhibiting some processes and promoting others that contribute jointly to the completion of spermatogenesis. We focus on the molecular mechanisms that underlie AMH inhibition by androgens at puberty, as well as on the role androgens have on Sertoli cell tight junction formation and maintenance and, consequently, on its effect on proper germ cell differentiation and meiotic onset during spermatogenesis.

Adolescence is a critical developmental period associated with an increase in stress, the appearance of anxiety and depressive symptoms, and changes in sleep patterns. Even though the disruption of sleep patterns in stress and anxiety and depressive disorders is well known, the independent effects of childhood trauma and stressful life events on sleep patterns are less understood. We tested the independent effects of stress (childhood trauma and stressful life events) while controlling for anxiety and depression on adolescent sleep patterns. Seven hundred fifty-two adolescents completed self-report questionnaires about childhood trauma, stressful life events, anxiety, and depression. Four sleep factors identifying movement during sleep, sleep regularity, sleep disturbances and sleep pressure were extracted in the principal component analysis of sleep questions. Both childhood trauma and recent stressful life events were significantly associated with sleep disturbances before and after controlling for anxiety and depression.

We perform new measurements of the expansion rate and the sound horizon at the end of the baryon decoupling and derive constraints on cosmic key parameters in the framework of the ΛCDM model, flat wCDM model, the ΛCDM+ΩK model and the phenomenological emergent dark energy (PEDE) model. We keep rd and H0 completely free and use the recent dark energy spectroscopic instrument (DESI) Year 1 and dark energy survey (DES) Year 6 BAO measurements in the effective redshift range 0.3<z<2.33 combined with the compressed form of the Pantheon sample of Type Ia supernovae, the latest 33 observational H(z) measurements based on the differential age method, and the recent H0 measurement from SH0ES 2022 as an additional Gaussian prior. Combining BAO data with the observational H(z) measurements, and the Pantheon SNe Ia data, we get H0=69.65±1.07 km s−1 Mpc−1, rd=147.71±2.18 Mpc in ΛCDM model, H0=70.06±1.07 km s−1 Mpc−1, rd=147.39±2.50 Mpc in PEDE model. The spatial curvature is Ωk=0.025±0.026 and the dark energy equation of state is w=−1.016±0.056, consistent with a cosmological constant. We apply the Akaike information and the Bayesian information criterion test to compare the four models, and see that PEDE model performs better.

Myxoid endometriosis is a rare entity that is part of the histological changes that can occur in endometriosis. It is extremely important that the pathologist has knowledge of the histological guidelines for the morphological recognition of this entity, as well as the histochemical and immunohistochemical techniques that will support the diagnosis. Define the morphological characteristics of myxoid endometriosis. In the present work we propose diagnostic approach guidelines, as well as the main differential diagnoses with the use of special histochemical techniques and immunohistochemical reactions to recognize this entity.

Background: While greenness has been associated with lower depression, the generalizability of this association in arid landscapes remains undetermined. We assessed the association between depression and greenness among nursing students living in El Paso, Texas (the Chihuahuan desert). Methods: Depression was measured with the Patient Health Questionnaire-9 scale, and greenness with the normalized difference vegetation index (at buffer sizes =250m, 500m, 1000m). Using data from the National Land Cover Database two additional measures of land patterns were analyzed: grayness and brownness. Structural equation models were used to assess the relationships of these land patterns to depression and quantify the indirect effects of peer alienation. Results: After adjusting for individual characteristics, at buffers 250 m greenness was associated with a decrease in the Incidence Rate Ratios (IRR) of depression by 49% (IRR, 0.51; 95%CI, 0.12-2.10), greyness with increases by 64% (IRR, 1.64; 95%CI, 1.07-2.52) and brownness with decreases by 35% (IRR, 0.65; 95%CI, 0.42-0.99). At buffer 250 m peer alienation explained 17.43% (95% CI, -1.79-36.66) of the association between depression and brownness, suggesting a pathway to depression. Conclusions: We did not observe an association between depression and residential greenness in El Paso, Texas. However, we did observe a protective association between brownness and depression as well as an adverse association with grayness. These results have theoretical implications as based on commonly used frameworks in this literature and adverse association of brownness (and the lack of greenness) and depression was expected.

There is a restricted knowledge about the potential impact of the use of different wood species on color and anthocyanin changes during the red wine aging process. This lack of knowledge is even greater when no oak wood species are used. Thus, the aim of this study was to carry out a comparative analysis of the impact of wood chip extracts from oak, acacia and cherry species on the chromatic characteristics and anthocyanins changes by the use of model wine solutions. In this context, several methodologies were used to quantified, color and anthocyanins changes during the aging time studied. The results indicated that the contact between wood chip extracts and grape skin isolated anthocyanin extracts induced a decrease of color intensity, particularly red color, and also the anthocyanin content in the different experimental model wine solutions studied. All chromatic modifications are potentially detected by human eyes because ΔE values were much higher than 3 CIELab units. These tendencies seems to be independent of the wood species used, but more pronounced for higher contact time between wood chip extracts and anthocyanins. The obtained results may contribute to a better understanding of the chromatic changes of red wines when aged in contact with different wood chips species.

A set of aromatic copolyimides was obtained by reaction of 4,4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA), and mixtures of the diamines 1,4-bis(4-amino-2-trifluoromethylphenoxy)-2,5-di-tert-butylbenzene (CF3TBAPB) and 3,5-diamino benzoic acid (DABA). These polymers were characterized and compared with the homopolymer derived from 6FDA and CF3TBAPB. All copolyimides showed high molecular weight values and good mechanical properties. The presence of carboxylic groups in these copolymers allowed their cross-linking by reaction with 1,4-butanediol. The crosslinked polymer films were extensively characterized and it was observed that the degree of crosslinking was low in the copolyimides possessing a small number of carboxyl groups. The degradation temperature of these crosslinked copolyimides was lower than their corresponding non-crosslinked ones. Glass transition temperatures were higher than 260 oC, showing the non-crosslinked copolyimides the highest values. Young moduli of these crosslinked showed values higher than 1.9 GPa, and slightly lower elongation at break when compared with the precursor copolyimides. All copolyimides (precursor, and crosslinked ones) films could be tested as gas separation membranes. It was seen that CO2 permeability values were around 100 barrer, having better selectivity than that of the homopolymer. Moreover, the plasticization resistance of the crosslinked material having a large number of carboxylic groups was excellent.

By employing a variation of the polyamidation method using in situ silylated diamines and acid chlorides, it has been possible to obtain a rod-type polyamide: poly(p-phenylene terephthalamide) (PPTA, a polymer used in the high value-added material Kevlar), with a molecular weight much higher than that obtained with the classical, and industrial, polyamidation method. The optimization of the method has consisted in using, together with the silylating agent, a mixture of pyridine and a high pKa tertiary amine. The research has been complemented by a combination of nuclear magnetic resonance and molecular simulation studies, which have determined that the improvements in molecular weight derive mainly from the formation of silylamide groups in the growing polymer.

The 2030 Agenda sets out seventeen Sustainable Development Goals (SDGs). The educational goal is to promote the education of citizens on sustainable development, among other things. Educating today's digital citizens on sustainability means training them for justice and social activism, commitment and political engagement. However, research into the subject shows a lack of consistency in the education of university students. This paper presents a study of students of Education, on education on sustainability through the practice of active and critical digital citizenship. A quasi-experimental method was used to learn about the behaviours of digital citizens, and intervention was carried out by means of an SDG-focused workshop and observation of the final level of commitment. The results show a positive level of commitment and digital activism around content related to sustainable development, which can be addressed from the university syllabus in a cross-curricular way.

The cultivation of pea pods spans across various regions and climates with a global production of around 20 million tons. The pea peel wastes, which make up 30–40% of the total weight of the peas, are freely available in large quantities. The biomass used was characterized via ultimate, proximate, and structural analysis obtaining a 20,2 %w of cellulose and 17,4 %w of hemicellulose which via valorization processes can be transformed into platform chemicals. Hydrothermal valorization presents itself as a clean form of treatment of said wastes, ranging from 120 – 180 ºC (LHW) to 180 to 260 ºC (HTC). The use of LHW can lead to the production of sugars (up to 70%w yield) and levulinic acid (4 %w yield) while the use of HTC leads to Formic acid (40 %w) and levulinic acid (4 %w yield). The use of LHW for longer times favors the production of HMF and Furfural. The use of homogeneous catalysts (H2SO4, CH3COOH, KOH and NaHCO3) was implemented and their selectivity described. Solid fractions of LHW and HTC were characterized via FTIR and elemental analysis and the change in their structure described as they shift from biomass to biochar. Optimal conditions for each platform chemical were reported for best utilization of the peapod waste.

In this review we summarize existing trends of flow control used to improve the aerodynamic efficiency of wings. We first discuss active methods to control turbulence, starting with flat-plate geometries and building towards the more complicated flow around wings. Then, we discuss active approaches to control separation, a crucial aspect towards achieving high aerodynamic efficiency. Furthermore, we highlight methods relying on turbulence simulation, and discuss various levels of modelling. Finally, we thoroughly revise data-driven methods, their application to flow control, and focus on deep reinforcement learning (DRL). We conclude that this methodology has the potential to discover novel control strategies in complex turbulent flows of aerodynamic relevance.

A deep review of the existing literature on the culpeo ecology is carried out, using scientific articles, book chapters and web resources. For information published before 1988, the synthesis made by a previous report was used. For subsequent information, bibliographic searches were carried out through the main servers, considering all of the generic names used to define the species so far. From this update, new general patterns on ecology, behavior and conservation concerns about culpeos are described. Gaps in current knowledge have been identified and new lines of research are proposed.Most of the studies focused on diet, conflicts with the species in livestock areas, and on the use of space and habitat. We found an incomplete, poor justification for all of the proposed subspecies and their supposed geographical distribution, as well as a scarcity of studies on genetic issues, population dynamics and conservation concerns. It is remarkable that vast regions in South America holding culpeos lacked basic information on the species.Diet studies describe a marked trend towards resources selection at the local level, which supports the view of the culpeo as a facultative trophic specialist. In addition, it has been confirmed that in the high Andes the culpeo is also a top predator that may regulate carnivorous communities, as well as that in arid environments culpeos can act as important seed dispersers. The assessment of the conservation status of the species differs among regions, although there is no sufficient information to reach clear conclusions in most cases. Even so, in Ecuador and Colombia the species has been listed as ‘Vulnerable’. Direct persecution and habitat alteration are considered to be the most important threats that the species is facing in many countries, although other risk factors such as climate change could also have serious consequences for the canid at the global scale.

Based on economic feasibility, renewable generators can use pumped hydro storage (PHS) to improve their profitability by performing energy arbitrage under real time pricing (RTP) schemes. In this paper, we present a new method to optimise the size and manage utility-scale wind-PV systems using PHS with energy arbitrage under RTP. The storage in the PHS is used to supply load consumption and/or energy arbitrage. Further, both load supply and power-generating systems are considered, and a genetic algorithm metaheuristic technique is used to perform the optimisation efficiently. Irradiance, wind speed, temperature, hourly electricity price, component characteristics, and financial data are used as data, and the system is simulated in 15 min time steps during the system lifetime for each combination of components and control variables. Uncertainty is considered for the meteorological data and electricity prices. The pump and turbine efficiencies and available head and penstock losses are considered as variables (not fixed values) to obtain accurate simulations. A sample application in Spain is demonstrated by performing a sensitivity analysis of different locations, electricity prices, and costs. The PHS is not worth considering with the present cost of components.

A novel method based on a hybrid incremental modeling approach has been designed and applied to imbalance detection in ultra-high precision rotating machines. The model is obtained by a two-step iterative process that combines an overall model (least-squares fitting) with a local model (fuzzy k-nearest-neighbour) to take advantage of their complementary capacities. Three normalization strategies of evaluating the effect on accuracy are analyzed. A comparative study demonstrates that the hybrid incremental model provides better error-based performance indices for detecting imbalance than a nonlinear regression model and an adaptive neural-fuzzy inference system model. The suitability of Mahanolobis normalization for hybrid incremental modeling is also demonstrated in this case study. The proposed strategy for imbalance detection is simple, fast, and non-intrusive, reducing the deterioration in the performance of ultra-high precision rotating machines due to vibrations.

Monitoring complex electro-mechanical processes is not straightforward despite the arsenal of techniques nowadays availanle. This paper presents a method based on Adaptive-Network-based Fuzzy Inference System (ANFIS) to estimate eccentricity of its spinning axis. The method is experimentally tested on an ultra-precision rotating device commonly used for micro-scale turning. The developed model has three inputs, two obtained from a frequency domain analysis of a vibration signal and the third, which is the device rotation frequency. A comparative study demonstrates that an adaptive neural-fuzzy inference system model provides better error-based performance indices for detecting imbalance than a non-linear regression model. This simple, fast, and non-intrusive imbalance detection strategy is proposed to counteract eventual deterioration in the performance of ultra-high precision rotating machines due to vibrations.

Cardiac development is a complex developmental process that results in the formation of the four-chambered organ from a single linear heart tube. In the early stages of development, the linear heart tube is composed of only two tissue layers, an external myocardium that is internally lined by the endocardium. Subsequently, the proepicardium emerges at the septum transversum and soon thereafter proepicardial cells will migrate into the naked myocardium, leading to the formation of the embryonic epicardium. As cardiac development proceeds, epicardial-derived cells migrate into the subepicardial space and subsequently invade the developing ventricular chambers leading to the contribution of distinct cardiovascular cell types such as the cardiac fibroskeleton and different components of coronary vasculature. At present, the molecular mechanisms that regulate the transitional process from the proepicardium to the embryonic myocardium are largely unexplored. In this study we have implemented an ex vivo proepicardium/septum transversum (PE/ST)-embryonic myocardium explant model and we demonstrated that miR-223, but not miR-195, is capable of modulating PE/ST migration, a process that seems to be mediated by Slug expression. Thus, our study demonstrates for the first time the implication of distinct microRNAs in the PE/ST to embryonic myocardium transition in chicken embryonic hearts.

Improving performance and promoting sustainability in women's handball are key objectives to maximize the potential of female players and ensure the long-term viability of the sport. In this context, training with Olympic movements and their derivatives improves the development of strength, power, and speed, which are determinants of performance in team sports. The aim of this study was to determine if training with Olympic movements produces significant improvements in jumping, throwing, sprinting, and change of direction performance in women handball players. Twenty-one female handball players participated in the study (10 for the control group and 11 for the intervention group). Age ranged from 15 to 17 years. All participants performed four assessment tests (Abalakov Test, throw test, 20-meter Sprint and V-Cut Test) to determine jump height, throwing speed, running speed, and change of direction ability. Measurements were carried out before and after the intervention. For six weeks, the control group performed the strength work established by the club twice a week while the intervention group additionally performed training with Olympic movements. Significant differences (p <0.05) were found between the pre and post measurement of the control group and the intervention group in jump height, throwing speed and running speed, being higher in the intervention group. For the change of direction, no significant differences were found. Between groups, significant differences were observed at the end of the intervention for jump height and running speed. The conclusion of this study was that, by training with Olympic movements, in addition to regular training, could produce greater improvements in jumping performance, throwing speed and running speed in female handball players.

Severe combined immunodeficiency (SCID) is a primary inherited immunodeficiency that could be fatal, usually due to opportunistic infections caused by bacteria, viruses, fungi, and protozoa if left untreated. Opportunistic infections are the most common presentation of SCID these include viral, fungal, or intracellular bacteria, and infection should prompt immunological investigation. This review aimed to provide a comprehensive approach to the microrganisms associated with severe combined immunodeficiency (SCID) and its management. The authors described SCID as a syndrome and summarized the different microorganisms that affect children and how they are managed.

Despite increased hurricane intensity, the U.S. Gulf of Mexico coast has experienced dramatic coastal population increase of 24.5% from 2000 to 2016. However, in coastal Louisiana areas with dramatic wetland loss, parishes have experienced population declines and lower rates of population growth. Therefore, understanding the magnitude of the effect of wetland loss as a main driver in population loss in coastal Louisiana is critical. Using regression analysis, this study finds that wetland loss has a significant and persistent negative effect on population growth in coastal Louisiana. This effect resulted in a reduction in the population growth rate in coastal parishes over time. A counterfactual simulation was conducted to estimate the potential population size in the absence of wetland loss from 1990 to 2021. On average, the effect of 1 hectare of wetland lost causes a reduction of approximately 1000 persons. This indicates that for the year 2021, the population was approximately 18% lower than the population that would have existed in the absence of wetland loss. This research underscores the role of wetlands in providing direct and indirect benefits to people in coastal Louisiana that are ultimately reflected in its population levels.

Hydroxytyrosol (HT) is a nutraceutic compound, mainly found in the fruit, leaves and waste from the olive oil industry, that shows one of the highest antioxidant activities among molecules of natural origin. To harness this bioactivity in cosmetics, pharmaceuticals, and the food industry, it is essential to modify the hydrophilicity of HT to enhance its compatibility with lipid-based mixtures. This chemical modification must be done with high selectivity to avoid compromising its radical scavenging activity. This work presents a highly efficient and selective approach to perform the biocatalytic esterification of free fatty acids (FFAs) of different alkyl chain length with HT in a reaction medium based on the SLIL [C12mim][NTf2]. By using a 1:2 (mol/mol) HT:FFA mixture of substrates, the HT monoester derivative was obtained up to 77% yield after 2 h at 80 oC. The adjusted molar ratio of substrates, combined with the ability to recover the SLIL for further reuse, significantly reduces waste accumulation compared to other reported strategies and results in a more sustainable approach as demonstrated by different green metrics. Furthermore, it was demonstrated by a DPPH test how the HT monoester products retain the same antioxidant activity as free HT, being superior to vitamin C.

The main objective of this work is the design and implementation of self-adaptive capabilities in wireless sensors by applying control engineering and model-based design methodologies. It has been addressed the problem related to the changes in the flow of data packets through the network connection and the excess energy consumption that this causes in these devices. To design the solution, a systemic characterization of the scheduling and execution process of embedded tasks on the device has been carried out. This means defining cause-effect relationships in the system and its modelling theoretically and/or experimentally. In turn, these models facilitate the design of control strategies to improve the dynamic behavior of the system. As a solution, a self-adaptation strategy based on feedforward control algorithm has been designed and developed, which has been applied to improve the dynamic behavior and resource consumption. The developed solution has been satisfactorily evaluated experimentally.

In this paper, we introduce Syntax-Enhanced Transformer Model (SET), a groundbreaking approach in the realm of Transformer-based language modeling that seeks to redefine the boundaries of linguistic analysis and comprehension. SET innovatively combine (i) the well-established high-level performance, scalability, and adaptability of traditional Transformers with (ii) a sophisticated analysis of syntactic structures. This synergy is enabled by a novel attention mechanism tailored to parse syntactic nuances and a deterministic process adept at transforming linearized parse trees into meaningful linguistic representations. Our comprehensive experiments reveal that SET significantly advance the field by surpassing existing benchmarks in sentence-level language modeling perplexity. They exhibit exceptional proficiency in tasks that require an acute awareness of syntax, setting new standards for language models in understanding complex linguistic structures. Furthermore, SET demonstrate an enhanced capability to grasp nuanced linguistic patterns that have traditionally been challenging for standard Transformer models. However, our studies also uncover a unique aspect of SET: while they excel in sentence-level tasks, their representation of sentences as singular vectors—owing to the syntactic composition constraints intrinsic to their design—introduces certain limitations in document-level language modeling. This observation points to an intriguing area for future exploration; it suggests the potential need for an alternative or complementary memory mechanism within Transformer models, one that functions independently from, yet in harmony with, syntactic structures. Such a mechanism could be pivotal in enhancing the model's ability to comprehend and process long-form texts effectively. In conclusion, SET mark a significant stride in the journey towards more sophisticated, syntax-aware language models. They offer promising insights into the integration of deep linguistic knowledge with cutting-edge machine learning techniques, potentially opening doors to a new era of natural language understanding and processing.

The paradigm of leveraging code as a dataset has recently gained traction, offering innovative solutions in domains such as automated commit message generation, pull request description automation, and program repair mechanisms. Consider the challenge in generating commit messages: traditional methods treat source code as a mere token sequence, applying neural machine translation models. This approach, however, overlooks the critical syntactic structures inherent in programming languages, which could offer deeper insights and improved accuracy. Building upon prior research, specifically the Code2Seq framework, which utilized Abstract Syntax Tree (AST) structural data for source code representation to automate method name generation, this paper extends and refines this concept. We introduce "CSR", a novel methodology adapted to represent code edits effectively. This paper investigates the impact of employing syntactic structure, focusing on the classification of code edits. Drawing inspiration from Code2Seq, "CSR" utilizes AST's structural properties, particularly the paths connecting leaf nodes, to enhance the task of code edit classification. This approach is rigorously evaluated on two distinct datasets, comprising fine-grained syntactic edits. Our comprehensive experiments reveal that incorporating syntactic structures does not significantly outperform simpler methodologies. While methods like Code2Seq and our proposed "CSR" show potential, our findings highlight that there is considerable scope for improvement and refinement before such techniques can be universally applied for learning representations of code edits. We anticipate that our findings will spark further research in this field, paving the way for more effective use of syntactic structures in code representation.

Contemporary advanced models for aspect-targeted opinion word extraction (ATOWE), which predominantly utilize BERT-based encoders at a word level, have shown limited advancements when integrated with graph convolutional networks (GCNs) for syntactic tree assimilation. Recognizing the prowess of BERT subwords in encapsulating rare or context-poor words, this study pivots from syntactic trees to BERT subwords, omitting GCNs from the structural framework. Our approach, named Aspect-Enhanced Wordpiece Extraction Model (AEWEM), focuses on refining aspect representation during encoding. We propose an input format of paired sentence-aspect, diverging from traditional single-sentence inputs. AEWEM demonstrates superior performance on benchmark datasets, establishing a robust foundation for future explorations in this domain.

The Transformer architecture, while adept at capturing context through self-attention, falls short in encapsulating complex syntactic structures effectively. Addressing this gap, we introduce the Linguistic Structure through Graphical Interpretation with BERT (LSGIB) approach in Machine Translation (MT) frameworks. Combining the strengths of Graph Attention Network (GAT) and BERT, LSGIB intricately captures syntactic dependencies as explicit knowledge from the source language. This enhances the source language representation and aids in more accurate target language generation. Our empirical analysis leverages gold-standard syntax-annotated sentences and employs a Quality Estimation (QE) model. This approach enables us to assess translation improvements in terms of syntactic accuracy, extending beyond traditional BLEU score metrics. The LSGIB model demonstrates superior translation quality across diverse MT tasks, maintaining robust BLEU scores. Our study delves into the optimal sentence lengths benefiting from LSGIB and identifies which syntactic dependencies are more precisely captured. We observe that GAT's ability to learn specific dependency relations directly influences the translation quality of sentences with those relations. Additionally, we discover that incorporating syntactic structure into BERT's intermediate and lower layers offers a novel approach to modeling linguistic structure in source sentences.

The field of program classification, a critical aspect of software engineering, facilitates understanding and categorization of code across various applications, including anomaly detection, and code quality assessment. The advancement of cross-language program classification opens up avenues for efficient code translation among different programming languages, significantly aiding developers in rapid coding and reducing development cycles. Existing research primarily focuses on semantic code analysis, with limited emphasis on cross-linguistic challenges. To address this, we introduce an innovative neural network model, CodeSemanticsNN, which leverages a refined Syntax Structure (SS) approach. This model consists of two integral mechanisms: first, it adopts a novel SS representation that combines sequential and graph-based SS structures, enhancing semantic feature capture. Second, it employs a 'unified vocabulary' strategy to bridge the gap between diverse programming languages, facilitating efficient cross-language classification. Additionally, we have compiled a comprehensive dataset of 20,000 files spanning five programming languages, serving as a benchmark for cross-language classification. Our experiments on this dataset demonstrate that CodeSemanticsNN surpasses existing models in four key metrics: Precision, Recall, F1-score, and Accuracy.

The evolution of sentence representation learning, especially with parse tree encoders, has shown remarkable progress. Traditional approaches predominantly rely on recursive encoding of tree structures, which impedes parallel processing capabilities. Additionally, these methods often overlook the significance of dependency tree arc labels. To overcome these limitations, we introduce the Syntax-Enhanced Transformer (SET), incorporating a novel dual-attention mechanism that integrates relation-focused attention alongside traditional self-attention. This design effectively encodes both dependency and spatial positional relationships within sentence dependency trees. Our approach innovatively incorporates syntactic information into the Transformer framework without compromising its inherent parallelizability. The SET demonstrates superior or comparable performance to contemporary methods across various sentence representation tasks, significantly enhancing computational efficiency.

This paper introduces a novel graph polynomial approach for differentiating tree structures in dependency grammar. Utilizing this polynomial representation, we develop a metric to assess the similarity in syntax. This approach offers a detailed and inclusive analysis of the dependency structures and relationships in sentence construction. We employ this polynomial method to examine sentence structures across various languages in the Parallel Universal Dependencies treebanks. Our analysis includes comparing the syntax of original sentences and their translated counterparts in diverse languages, alongside a comprehensive study of syntactic typologies within these treebanks. Additionally, we explore the application of our methodology in evaluating the syntactic diversity within language corpora.

Recent advancements in neural language models, particularly attention-based architectures like the Transformer, have substantially surpassed traditional methods in various natural language processing tasks. These models adeptly generate nuanced token representations by considering contextual relations within a sequence. However, augmenting these models with explicit syntactic knowledge, such as part of speech tags, has been found to remarkably bolster their effectiveness, especially under constrained data scenarios. This study introduces the Linguistic Enhanced Transformer (LET), which integrates multiple syntactic features, showing a notable increase in translation accuracy, evidenced by an improvement of up to 1.99 BLEU points on subsets of the WMT '14 English-German dataset. Furthermore, this paper demonstrates that enriching BERT models with syntax-aware embeddings enhances their performance on several GLUE benchmark tasks.

Conventional text style transfer (TST) methodologies primarily utilize style classifiers to segregate the content and stylistic elements of text for effective style transformation. Despite the pivotal role of these classifiers, their influence on TST techniques remains largely unexplored. This study embarks on a detailed exploration of the limitations inherent in style classifiers within current TST frameworks. We reveal that these classifiers often inadequately comprehend sentence syntax, leading to diminished performance in TST models. In response, we introduce the Syntax-Enhanced Style Transfer (SEST) model, a groundbreaking approach incorporating a syntax-sensitive style classifier. This classifier ensures that the extracted style representations robustly encapsulate syntax nuances, enhancing TST effectiveness. Rigorous evaluations across diverse TST benchmarks demonstrate that SEST significantly surpasses contemporary models in performance. Additionally, our case studies highlight SEST's proficiency in producing syntactically coherent sentences that aptly retain original content.

This study explores cutting-edge and sustainable green methodologies and technologies for the synthesis of functional nanomaterials, with a specific focus on the removal of water contami-nants and the application of kinetic adsorption models. Our research adopts a conscientious ap-proach to environmental stewardship by synergistically employing eco-friendly silver nanopar-ticles, synthesized using Justicia Spicigera extract as a biogenic reducing agent, in conjunction with Mexican zeolite to enhance contaminant remediation, particularly targeting Cu²⁺ ions. Structural analysis, utilizing X-ray diffraction (XRD) and high-resolution scanning and transmis-sion electron microscopy (TEM and SEM), yields crucial insights into nanocomposite structure and morphology. Rigorous linear and non-linear kinetic models, encompassing pseudo-first order, pseudo-second order, Freundlich, and Langmuir, are employed to elucidate the kinetics and equilibrium behaviors of adsorption. Results underscore the remarkable efficiency of the Zeolite-Ag composite in Cu²⁺ ion removal, surpassing traditional materials, achieving an im-pressive adsorption rate of 98% for Cu. Furthermore, the Zeolite-Ag composite exhibits maxi-mum adsorption times of 480 minutes. In the computational analysis, an initial mechanism for Cu²⁺ adsorption on zeolites is identified. The process involves rapid adsorption onto the surface of the Zeolite-Ag NP composite, followed by a gradual diffusion of ions into the cavities within the zeolite structure. Upon reaching equilibrium, a substantial reduction in copper ion concen-tration in the solution signifies successful removal. This research represents a noteworthy stride in sustainable contaminant removal, aligning with eco-friendly practices and supporting the potential integration of this technology into environmental applications. Consequently, it pre-sents a promising solution for eco-conscious contaminant remediation, emphasizing the utiliza-tion of green methodologies and sustainable technologies in the development of functional na-nomaterials

Digital Educational Recourses (DER) have undergone a rapid evolution and integration into the educational contexts. Teachers play a fundamental role in incorporating technology into their classrooms, so it is important to identify the value that teachers on DER and reflect on the implications for their practice. Through the qualitative methodology the necessary data is obtained with open-response inter-views with teachers. This dataset was analysed and categorised using AQUAD. The results suggest that teachers acknowledge the importance of integrating digital re-sources into their classrooms, although there was no consensus regarding the appropriate level at which to do so. Further the inter-views revealed that younger teachers tend to use more self-elaborated or selected resources. Teachers noted the benefits of using technology, especially in regard to maintaining student motivation, how-ever they also highlighted a number of extrinsic challenges and limitations. The results indicate there is a relationship between teachers’ perceptions and their practice, although this could be improved.

In this paper, experimental results about the performance of a Takagi-Sugeno Fuzzy Controller (TSFC) for an EV3 Ballbot Robotic System (EV3BRS) are reported. The physical configuration for the EV3BRS has the form of an inverted pendulum mounted on a ball. The EV3BRS is an underactuated robotic system with four outputs and two control torques. The Takagi-Sugeno Fuzzy Model (TSFM) design comes from linearization of the nonlinear model around two operation points near from the upright position of the EV3BRS's body. The Parallel Distributed Compensation (PDC) approach is used to the design of the TSFC. The Linear Matrix Inequalities (LMIs) approach is used to get the feedback gains for every local linear controller guaranteeing global asymptotically stability, via a more relaxed stability condition, of the overall fuzzy control system. Measurement and control data from and to the EV3BRS are transferred via telecontrol and telemetry.

Gymnophiona, the most poorly known group of extant amphibians, includes elongated limbless tetrapods, with compact ossified skulls and reduced eyes, mainly adapted to fossorial life (only the Typhlonectidae exhibits adaptations for an aquatic or semiaquatic behavior). Caecilians are poorly represented in the fossil record, and despite the low number of fossil specimens described until now (only four taxa, in addition to indeterminate fragmentary material), their fossils play a key role in the knowledge of Lissamphibia origin and evolution, as well as contribute directly to a better understanding of phylogeny, taxonomy and biogeography of extant gymnophionan taxa. These records are scattered throughout geological time (from the Jurassic to the Neogene) and space (they are represented only on North and South America and Africa). Here, we revisit the caecilian fossil record, providing a brief description of all known extinct taxa described so far, along with general remarks about their impact on systematics, time range and geographic distribution of the clade, as well as prospects for future research. Possible calibration constraints based on the caecilian fossil record are provided.

Nowadays, there are implemented devices whose purpose is to perform massive computations by saving resources at the time they reduce the latency of arithmetic operations. These devices are usually GPUs, FPGAs and other specialised devices such as "Coral". Neural networks, digital filters and numerical simulators take advantage of the massively parallel operations of such devices. One way to reduce the amount of resources used is to limit the size of the registers that store data. This has led to the proliferation of numeric formats with a length of less than 32 bits, known as short floating point or SFP. We have developed several SFP’s for use in our neural network accelerator design, allowing for different levels of accuracy. We use a 16-bit format for data transfer and different formats can be used simultaneously for internal operations. The internal operations can be performed in 16-bit, 20-bit and 24-bit. The use of registers larger than 16-bit allows the preservation of fractional information while increasing precision. By leveraging some of the FPGA’s arithmetic resources, our design outperforms designs implemented from scratch and is competitive with specialized arithmetic circuits already implemented in the FPGA.

I. Introduction: Adherence to ART reduces morbidity and mortality among PLHIV by suppression of viral replication, restoration and preservation of immune function. However, poor adherence may lead to treatment failure and death. PLHIV have high probability of treatment interruptions due to lockdowns related to COVID-19 protocol. Mortality rate is higher among COVID-19 patients with HIV than those with COVID-19 only. This led to determination of the barriers to antiretroviral medication adherence in PLHIV at the time of COVID-19 pandemic and seek significant association between identified HIV treatment barriers and socio-demographic characteristics. II. Methods: A cross-sectional study using online survey questionnaire was distributed via social media. Sample size was computed using Open Epi software. Data was analyzed using Stata software. Categorical variables and quantitative data were summarized using frequencies and percentages, and mean and standard deviation respectively. Chi-square test or Fisher’s exact test, whichever is more appropriate, was used to determine association between socio-demographic characteristics and HIV treatment barriers. III. Results: There is a total of 116 respondents, 115 were males, homosexual (59.5%), with mean age of 30.25 years old (SD = 6.22) and majority (53.4%) were from NCR. The most common HIV treatment barriers reported by PLHIV in accessing treatment and care were unavailability of transportation and cost of courier services for ARV delivery (62.1%), location of treatment hubs (52.6%) and financial assistance (37.9%). IV. Conclusion: There is significant association between location of treatment hubs and respondents who finished college/graduate studies; checkpoints and crossing borders and: 1. respondents from Northern Luzon, 2. unemployment; financial assistance and: 1. Respondents 18 to 25 years old, 2. unemployment, 3. respondents who finished elementary/high school; psychosocial support and: 1. Respondents from NCR, 2. Respondents 26 to 30 years old;

The construction industry is responsible for 40 to 45% of primary energy consumption in Europe alone. Therefore, it is essential to find new materials with a lower environmental impact in order to attain sustainable housing. This study aims to determine and compare the environmental impact of two clay samples forming a basis for the manufacture of traditional brick, a standard material in building construction; traditional red clay brick and a brick based on clay mixed with a biological ingredient. The samples of fired clay were manufactured at the laboratory scale, the results being valid exclusively as indicators for the extrapolation of the analysis to other studies. The results of the environmental impact of these formulations have been examined through an evaluation of life-cycle analysis (LCA), observing that the incorporation of biological pore forming agents led to a decrease of around 15 to 20% of all impact categories studied. Thus, the suitability of using biological-based additives in clay bricks was confirmed both for their constructive characteristics (lighter material) and increased energy efficiency (better thermal insulation) considering the environmental point of view.

Current hydrogen production is based on the reforming process leading to the emission of pollutants; therefore, a substitute production method is imminently required. Water electrolysis is an ideal alternative for large-scale hydrogen production, as it does not produce any carbon-based pollutant byproducts. Production of green hydrogen from water electrolysis using intermittent sources (e.g., solar, eolic) would facilitate clean energy storage. However, the electrocatalysts currently required for water electrolysis are noble metals, making this potential option expensive and inaccessible for industrial applications. Therefore, there is a need to develop electrocatalysts based on earth-abundant and low-cost metals. Nickel-based electrocatalysts are a fitting alternative because they are economically accessible. Extensive research has focused on developing nickel-based electrocatalysts for hydrogen and oxygen evolution. Theoretical and experimental work have addressed the elucidation of these electrochemical processes and the role of heteroatoms, structure, and morphology. Even though some works tend to be contradictory, they have lit up the path for efficient nickel-based electrocatalysts. For these reasons, herein, a review of recent progress is presented.

Fiber optic sensors cannot measure damage; for getting information about damage from strain measurements, additional strategies are needed, and several alternatives have been proposed. This paper discuss two independent concepts: the first one is based on detecting the new strains appearing around a damage spot; the structure does not need to be under loads; the technique is very robust, damage detectability is high, but it requires sensors to be located very close to the damage, so it is a local technique. The second approach offers a wider coverage of the structure, it is based on identifying the changes caused by the damage on the strains field in the whole structure for similar external loads. Damage location does not need to be known a priori, detectability is dependent upon the sensors network density, damage size and the external loads. Examples of application to real structures are given.

The wave energy converter (WEC) technology constantly develops new designs and models. To encourage its development within the energy sector, research is required to improve current designs and create durable and effective devices. However, it is also crucial to investigate the suitability of a WEC to a site-specific sea condition as this can impact its optimal power absorption and constructability. This study evaluates and compares the efficiency of a heaving buoy with varied geometries in one of the most energetic places along the Mexican coast. A statistical analysis of the wave climate on the coast of Ensenada during the last 42 years is performed to define the conditions to which the device is subjected. The location of the WEC in shallow waters is chosen using a computational model which solves the modified mild slope equation in its elliptic shape. The heaving buoy floater is studied using three distinct geometries: a semi-sphere, a cylinder, and a proposed rounded semi-rectangle. The hydrodynamic response of the three geometries is then analysed in the frequency and time domain using ANSYS AQWA. The hydrodynamic study involves the assessment of the floating body dynamics, exerted forces, the power absorbed as well as the suitability of the proposed power take-off (PTO) system. Findings reveal that the proposed geometry absorbs the most energy, with an annual power of 135.11 MW, and that the transmission PTO design is appropriate for this type of technology.

The consumption of foods with fiber and phenolic compounds can be part of treating obesity through interaction with the gastrointestinal tract. Treatment with common bean leaves (BL) for obesity was evaluated in mice on a high-fat, high-fructose diet (HFFD). The proximal and phytochemical characterization of BL was determined. Obesity was induced with a HFFD for 14 weeks. Immediately after, the animals were supplemented with BL (10%) or standard diet (SD) as a strategy to seem a healthy diet (12 additional weeks). Changes in body composi-tion, lipid profile, and intestinal integrity were analyzed. BL contained 27.2% dietary fiber, total phenolics (475.04 mg/100 g), and saponins (2.2 mg/100 g). The VAT consumption of the BL group decreased by 52% compared to the HFFD group. Additionally, triglyceride concentrations were 23% lower in the BL consumption group compared to the HFFD group. The improvement in lipid profile was attributed to the (1.77-fold) higher fecal lipid excretion in the BL consumption group compared to the HFFD group. Likewise, pancreatic lipase decreased by 29%. Furthermore, BL supplementation reduced the level of IL-6 (4.4-fold) and FITC-dextran in serum by 50% compared with that in the HFFD group. Metabolic endotoxemia was inhibited after BL supplementation (-33%) compared to the HFFD group. BL consumption as a treatment in obese mice reduces adipose tissue accumulation and improves the lipid profile. Furthermore, we report for the first time that BL consumption improves intestinal integrity.

Shear deflection effects are traditionally neglected in most structural system identification methods. Unfortunately, this assumption might lead to significant errors in some structures, like deep beams. Although some inverse analysis methods based on the stiffness matrix method including shear deformation effects have been presented in the literature, none of these methods is able to deal with actual rotations in their formulations. Recently, the observability techniques, one of the first methods for the inverse analysis of structures included the shear effects into the system of equations. In this approach, the effects of shear rotation are neglected. When actual rotations on site are used to estimate the mechanical properties in the inverse analysis, it can result in serious errors in the observed properties. This characteristic might be especially problematic in structures such as deep beams where only rotations can be measured. To solve this problem and increase the observability techniques' applicability, this paper proposes a new approach to include shear rotations into the inverse analysis by observability techniques. This modification is based on the introduction of a new iterative process. To illustrate the applicability and potential of the proposed method, the inverse analysis of several examples of growing complexity is presented.

The art of representing source code is pivotal in numerous programming analysis applications. Recent strides in neural networks have marked notable successes in this realm. However, the peculiar structural characteristics inherent in programming languages have not been fully exploited in existing models. While neural models based on abstract syntax trees (ASTs) adeptly manage the tree-like nature of source codes, they fall short in discerning the diverse substructural nuances within programs. This paper introduces the Dynamic Syntax Tree Model (DSTM), an innovative approach that fuses various neural network modules into tree architectures tailored to the specific AST of the input. Distinct from preceding tree-based neural models, DSTM adeptly discerns the semantic variances across different AST substructures. We validate DSTM through rigorous testing in program classification and code clone detection, outperforming contemporary methods and demonstrating the benefits of harnessing intricate source code structures.

The theory and working principle of fabric phase sorptive extraction (FPSE) is presented that eloquently explains the mystery behind this new and powerful sample preparation technique. FPSE innovatively integrates the benefits of sol-gel coating technology and the rich surface chemistry of cellulose/polyester/fiberglass fabric, resulting in a microextraction device with very high sorbent loading in the form of an ultra-thin coating. This porous sorbent coating and the permeable substrate synergistically facilitate very fast extraction equilibrium. The flexibility of the FPSE device allows for direct insertion into original, unmodified samples of different origin. Strong chemical bonding between the sol-gel sorbent and the fabric substrate permits the exposure of FPSE devices to any organic solvent for analyte back-extraction/elution and to highly acidic or basic environments (pH 1-12) if required. A sol-gel derived sorbent, highly polar sol-gel poly(ethylene glycol) coating, was generated on cellulose substrates. Five cm2 segments of these coated fabrics were used as the FPSE devices for sample preparation using direct immersion. An important class of environmental pollutants, substituted phenols, was used as model compounds to evaluate the extraction performance of FPSE. The high primary contact surface area (PCSA) of the FPSE device and porous structure of the sol-gel coatings resulted in very high sample capacities and incredible extraction sensitivities for both the compound classes in a relatively short period of time. Different extraction parameters were evaluated and optimized. The new extraction devices demonstrated part per trillion level detection limits for substituted phenols, a wide range of detection linearity, and good performance reproducibility.

Chronic granulomatous disease (CGD) is a primary immunodeficiency caused by a defect in the phagocytic function of the innate immune system owing to mutations in genes encoding the five subunits of the nicotinamide adenine dinucleotide (NADPH) oxidase enzyme complex. This review aimed to provide a comprehensive approach to the pathogens associated with chronic granulomatous disease (CGD) and its management. The topics covered included common pathogens infecting CGD patients, granulomas, and CGD-related infectious diseases, including invasive aspergillosis, Mulch pneumonitis, and liver abscesses. In addition, we also covered the differential diagnosis of CGD and its management. Patients with CGD, often children, have recurrent life-threatening infections and may develop infectious or inflammatory complications. The most common microorganisms observed in the patients with CGD are Staphylococcus aureus, Aspergillus spp, Candida spp, Nocardia spp, Burkholderia spp, Serratia spp, and Salmonella spp. Triple-dose antimicrobial prophylaxis with empiric regimens is recommended. Therefore, therapeutics against this disease must be optimised, considering the lack of curative therapies and the long-term side effects of prophylactic regimens. Consequently, allogeneic haematopoietic stem cell transplantation from a human leukocyte antigen-identical donor has been proven to cure CGD.

Traditional mining activities in Zaruma-Portovelo (SE Ecuador) have led to high concentrations of pollutants in the Puyango River due to acid mine drainage (AMD) from abandoned waste. Dispersed Alkaline Substrate (DAS) passive treatment systems have shown efficacy in neutralizing acidity and retaining metals and sulfates in acidic waters, achieving near 100% retention for Fe, Al, and Cu, over 70% for trace elements, and 25% for SO₄²⁻. However, significant solid residues are generated, requiring proper geochemical and mineralogical understanding for management. This study investigates the fractionation of elements in AMD precipitates. Results indicate that trivalent metals (Fe, Al) form low-crystallinity oxyhydroxysulfate minerals such as schwertmannite and jarosite, which retain elements like As, Cr, Cu, Pb, and Zn through adsorption-coprecipitation. Sulfate removal occurs via salts like coquimbite and gypsum. Divalent metals are primarily removed through carbonate and bicarbonate phases, with minerals such as azurite, malachite, rhodochrosite, and calcite. Despite the effectiveness of DAS, leachates from the precipitates exceed regulatory thresholds for aquatic life protection, classifying them as hazardous and posing environmental risks. However, these residues offer opportunities for the recovery of valuable metals.

Surgical neurolysis is a procedure designed to liberate an injured nerve from scar tissue or adjacent structure, thereby facilitating nerve regeneration in cases of brachial plexus neuropathy (BPN). This study presents a case series of patients diagnosed with BPN who underwent surgical neurolysis. The primary focus was on the clinical assessment of recovery using the British Medical Research Council motor grading scale (BMRC). Additionally, a comprehensive literature review was conducted to analyze motor recovery outcomes related to surgical neurolysis for BPN. 18 patients with BPN who underwent surgical neurolysis where included. The results experienced a notable increase of 58% in muscle strength as assessed by the BMRC. The average preoperative state of 2.17±1.15 improved significantly to a postoperative condition of 3.44±1.34 (p = 0.003, d= 0.913) The systematic review identified 2298 articles which were selected for qualitative analysis, demonstrated that surgical neurolysis was associated with favorable motor recovery outcomes in 75.82% of the patients. Both the case series and the literature review reveal significant motor recovery following surgical neurolysis. It is crucial to conduct well-designed, adequately powered, randomized, and blinded clinical trials. Such studies will provide robust evidence to support or refute the utility of this approach in motor recovery.

Background: Trigeminal neuralgia associated to vascular compression, by aberrant or ectopic arterial or venous vessels, is a frequent condition in clinical practice. Management with microvascular decompression through a Minimal invasive retrosigmoidal has shown high rates of pain control, with low complication rates and excellent therapeutic results. Objective: To describe the surgical technique and clinical outcomes in terms of pain relief after microvascular decompression for trigeminal nerve, through a minimal invasive retrosigmoidal parasterional burr-hole technique. Methods: A group of patients with trigeminal neuralgia refractory to medical management who underwent microvascular decompression considering outcomes based on Visual Analogue Scale (VAS), and Barrow Neurological Institute Pain Scale (BNIPS). Added to a technical note of the surgical technique for a minimal invasive retrosigmoidal parasterional burr-hole. Results: Twenty-two patients were evaluated, clinical assessment after surgical intervention showed a decrease pain according to VAS, resulting from an average preoperative state of 9.5 ± 0.37 to a postoperative condition of 1.32 ± 1.28, exhibiting statistically significant changes (p < 0.0001, d = 9.356). On the other hand, in relation to the BNIPS scale, a decrease from an average preoperative status of 4.55 ± 0.25, to a postoperative status at 12 months of 1.73 ± 0.54 was also demonstrated, showing significant changes (p < 0.0001, d = 3.960). Conclusion: Microvascular decompression of the trigeminal nerve through a minimal invasive retrosigmoidal parasterional burr-hole is feasible and can be a safe and effective technique for the management of pain.

Opossums, native to the Americas, are unique marsupials with over 100 species. The Common Opossum and Virginia Opossum are notable species. They are nocturnal, omnivorous, and adapt to various habitats. Their reproduction involves a short gestation and marsupial pouch development. Despite their ecological benefits like seed dispersal and insect control, their proximity to human habitats exposes them to pathogens, posing public health risks. These include protozoa, helminths, and arthropods that can spread zoonotic parasites and vector-borne diseases. The marsupial immune system, including opossums, is complex, rivaling eutherian mammals. Key immune genes were identified in the grey short-tailed opossum genome. CD1 protein and VpreB surrogate light chain were also found. Marsupials are proposed as ideal models for studying developmental immunology. A West Indian opossum (Didelphis marsupialis) was found and examined. Blood tests revealed abnormalities, including a low white blood cell count and signs of anemia. The results contribute to understanding the species’ health and adaptability in the wild.

Essential oils (EO) are a great antimicrobial resource against bacterial resistance in public health. Math models are useful describing the growth, survival, and inactivation of microorganisms against antimicrobials. We evaluated the antimicrobial activity of M. armillaris EO obtained from plants placed in the province of Buenos Aires (Argentina) against Staphylococcus aureus. Minimum Inhibitory and Bactericidal Concentrations were close and decreased slightly acidifying the medium from pH 7.4 to 6.5 and 5.0. This result was also evidenced by applying a sigmoid model, where the time and EO concentration necessaries to achieve 50% of the maximum effect decreased when medium was acidified. Moreover, at pH 7.4, applying the Gompertz model, we found that subinhibitory concentrations of EO decreased the growth rate and the maximum population density, and increased the latency period respect to the control. Additionally, we established physicochemical parameters for quality control and standardization of M. armillaris EO. Mathematical modelling allowed us to estimate key parameters in the behavior of S. aureus and Melaleuca armillaris EO at different pHs. This is interesting in situations where the pH changes are relevant, such as the control of intracellular infections in public health or the development of preservatives for food industry.

We propose an advanced filtering scheme based on Recurrent Neural Networks (RNNs) and Deep Learning to enable efficient control strategies for Vertical Farming (VF) applications.  We demonstrate that the best RNN model incorporates five neuron layers, with the first and second containing ninety Long Short-Term Memory neurons.  The third layer implements one Gated Recurrent Units neuron.  The fourth segment incorporates one RNN network, while the output layer is designed by using a single neuron exhibiting a rectified linear activation function.  By utilizing this RNN digital filter, we introduce two variations: (1) A scaled RNN model to tune the filter to the signal of interest, and (2) A moving average filter to eliminate harmonic oscillations of the output waveforms. The RNN models are contrasted with conventional digital Butterworth, Chebyshev I, Chebyshev II, and Elliptic Infinite Impulse Response (IIR) configurations.  The RNN digital filtering schemes avoid introducing unwanted oscillations, which makes them more suitable for VF than their IIR counterparts.  Finally, by utilizing the advanced features of scaling of the RNN model, we demonstrate that the RNN digital filter can be pH selective, as opposed to conventional IIR filters.

The rapidly evolving domain of multimodal sentiment analysis is crucial for unraveling the intricate layers of emotional expression in social media content, customer service interactions, and personal vlogs. This research introduces a cutting-edge Advanced Cross-Modal Gating (ACMG) framework that significantly enhances the precision of sentiment analysis by refining the interplay among textual, auditory, and visual modalities. Our approach addresses three foundational aspects of sentiment analysis: (1) Advanced learning of cross-modal interactions, which focuses on extracting and synthesizing sentiment from varied modal inputs, thus providing a holistic view of expressed emotions; (2) Mastery over the temporal dynamics of multimodal data, enabling the model to maintain context and sentiment continuity over extended interactions; and (3) Deployment of a novel fusion strategy that not only integrates unimodal and cross-modal cues but also dynamically adjusts the influence of each modality based on its contextual relevance to the sentiment being expressed. The exploration of these dimensions reveals that the nuanced modeling of cross-modal interactions is crucial for enhancing model responsiveness and accuracy. By applying the ACMG model to two highly regarded datasets—CMU Multimodal Opinion Level Sentiment Intensity (CMU-MOSI) and CMU Multimodal Opinion Sentiment and Emotion Intensity (CMU-MOSEI)—we achieve groundbreaking accuracies of 83.9\% and 81.1\%, respectively. These results represent significant improvements of 1.6\% and 1.34\% over the current state-of-the-art, showcasing the superior performance and potential of our approach in navigating the complexities of multimodal sentiment analysis.

Nowadays, the research and development of on-chip LiDAR sensors for vehicle collision avoidance is growing very fast. Therefore, the assessment of the reliability in obstacle detection using the information provided by LiDAR sensors has become a key issue to be explored by the scientific community. This paper presents the design and implementation of a self-tuning method in order to maximize the reliability of an Internet-of-Things sensors network and to minimize the number of sensors to localize with the required accuracy obstacles by a detection threshold. In order to achieve this goal, models that predict accuracy (i.e., prediction error) for object localization using data collected by LIDAR sensors are designed and implemented in Webots Automobile 3D simulation tool. The approach is based on combining different techniques. Firstly, point-cloud clustering technique and an error prediction model library composed by a multilayer perceptron neural network with backpropagation, k-nearest neighbors and linear regression are explored. Secondly the above-mentioned techniques for modeling are also combined with a supervised and reinforcement machine learning technique, Q-learning in order to minimize the detection threshold. In addition, a IoT driving assistance simulated scenario with a LiDAR sensor network is designed in order to validate the prediction model and the optimal configuration of the sensor network to guarantee reliability in obstacle localization. The results demonstrate that the self-tuning method is appropriate to increase the reliability of the sensor network whereas minimizing the detection threshold

The TeNDER project aims to improve the Quality of Life (QoL) of chronic patients through an integrated care ecosystem. This study evaluates the Health Recommender System (HRS) developed for the project, which offers personalized recommendations based on data collected from a set of monitoring devices. The list of notifications covered different areas of daily-life such as physical activity, nutrition, and sleep. We conducted this case of study to evaluate the effectiveness and usability of the HRS in providing accurate and relevant recommendations to users. Evaluation process consisted on survey administration for QoL assessment, and the satisfaction and usability of the HRS. The four-week pilot study involved several patients and caregivers, and demonstrated that the HRS was perceived as user-friendly, consistent, and helpful, with a positive impact on patients’ QoL. However, the study highlights the need for improvement in terms of personalization of recommendations.

Zidovudine (AZT) has significantly reduced the mortality and morbidity rates among AIDS patients, but it has been associated with hepatotoxicity. AZT treatment has been linked to disrupted lipid and glucose metabolism, and the enhancement of pro-inflammatory chemokines and other mediators, which can lead to liver steatosis. In contrast, the administration of adenosine (ADO) has proven to be an effective hepatoprotector against both acute and chronic liver damage. Therefore, present study was aimed to investigate the harmful effects of chronic AZT administration and the beneficial effects of the co-administered ADO. Chronic oral AZT administration did not induce hyperglycemia or dyslipidemia, but serum liver marker enzyme activities were increased, as well as evidence of liver steatosis and inflammation. These findings were associated with low insulin and glucagon levels, elevated serum levels of pro-inflammatory cytokines and disruptions in cell redox states in these animals. ADO co-administration attenuated the deleterious effects induced by AZT: blocking the production of inflammatory molecules, increasing serum insulin and glucagon levels, and restoring liver cellular redox state. Then, blood insulin levels seemed to be greatly influenced by the cellular redox state, which was altered by AZT administration. This alteration is likely to be connected to mitochondrial integrity and metabolism.

Vaccination has been one of the most successful and the most significant scientific advances in human health and life expectancy all around the globe. The World Health Organization considers that immunization should be recognized as the main component of human health right, due to the fact that vaccination prevents 2.5 million deaths annually (World Health Organization, 2011). The most successful vaccines have been developed using conventional methods that follow the paradigm established by Pasteur: "to isolate, inactivate and inject" the pathogen microorganism and mimic a natural infection. Recently, metagenomics have played an important role in the discovery of new immunogens for vaccine design and the selection of antigens based on genomic information. The main approach that has used this strategy has been called "reverse vaccinology". This promising and arising field allows the screening of the entire potential antigenic repertoire of an organism using predictive bioinformatic tools. Once the antigenic protein or proteins have been selected, they are expressed and purified using molecular cloning and in vitro expression techniques. Following the in vitro production step, they are probed in animal models to evaluate the in vivo protective strength of the immune response. The main aim of this in vivo approach is to evaluate the ability of the immune response to eliminate or neutralize the pathogen at the time of infection. Those antigens capable of generate a specific immune response with neutralizing activity for natural infections are the best candidate vaccines. In this review we summarize the evolution of vaccinology since its inception, with special emphasis on the development of VLPs as vaccine platforms and their future in preventive medicine and we introduce a new recombinant platform for antigen presentation based on Junin virus VLPs (JUNV-VLPs).

This study focuses on the synthesis, characterization and study of a new perovskite-type materials as cathode in SOFC. The synthesized doped perovskites have been successfully synthesized with high purity. The electrochemical performance of these materials was extensively examined through the characterization of I-V-P and EIS curves at the three temperatures: 750, 800 and 850 °C. Where it is revealing a substantial reduction of total resistances by approximately 50% and 70%, accom-panied by an impressive increase in power densities by around 200% and 300%, respectively. The cell featuring Sm0.01Sr0.99Fe0.5Co0.5O3 exhibited the most commendable electrochemical properties at each temperature, following closely were Pr0.01Sr0.99Fe0.5Co0.5O3 and La0.01Sr0.99Fe0.5Co0.5O3.

Objectives: To analyse and detail surgical process improvement activities that achieve the highest economic impact. Methods: Over 4 years, a team of technicians and healthcare professionals implemented a set of Lean surgical process improvement projects at Vall d’Hebron University Hospital (VHUH), Barcelona, Spain. These projects now form part of the daily routine in the surgical process. The economic impact on the hospital's surgical activity budget was analysed. Results: Process improvements have led to annual operational savings of over € 8.5 million. These improvements include better patient flow, better management of information between healthcare professionals, and improved logistic circuits. Conclusions: The current cultural shift towards process management in large hospitals implies shifting towards results-based healthcare, patient-perceived value (VBHC) and value-added payment. A Lean project implementation process requires long-term stability. The reason a considerable number of projects fail to complete process improvement projects is the difficulty involved in establishing the project and improving management routines. Few studies in the literature have investigated the economic impact of implementing Lean management a posteriori, and even fewer have examined actual cases. In this real case study, changes to surgical block management were initiated from zero. After being carefully thought through and designed, changes were carried out and subsequently analysed.

Collision avoidance is an important feature in advanced driver-assistance systems, aiming at providing correct, timely and reliable warnings before an imminent collision (objects, vehicles, pedestrians, etc.). A co-simulation framework is proposed in this paper to address the design and evaluation of collision avoidances in a cyber-physical system. The co-simulation framework is supported on the interaction between SCANeR and Matlab/Simulink. From the best of authors’ knowledge, two main contributions are reported in this paper. Firstly, the modelling and simulation of virtual on-chip LIDAR sensors in a cyber-physical system (CPS) considering traffic scenarios is presented. The CPS is designed and implemented in SCANeR. Secondly, an obstacle recognition library with three specific Artificial Intelligence-based methods is also designed based on sensory information database provided by SCANeR. Three methods for collision avoidance detection are considered, i.e.; a multi-layer perceptron neural network, a self-organization map and a support vector machine. Finally, a comparison among these methods for detecting obstacles before different weather conditions is done with very promising results in terms of accuracy. The best results are achieved using the multi-layer perceptron in sunny and fog conditions, the support vector machine in rainy and self-organized map in snowy conditions.

Canistel (Pouteria campechiana (Kunth) Baehni) (yellow sapote, canistel). Originally from Mexico, the fruit is edible, and the tree is used as an ornamental and medicinal plant. Descriptive studies were carried out with the objective of morphologically characterizing the fruits and leaves of trees located in different regions of Mexico to select outstanding specimens and propose their massive reproduction. The trees were selected in three zones. In zone 2 from flower anthesis to harvest 11 months, fruits with 3 seeds, greater weight (180 to 330 g) and quantity of pulp (198.88 g), subglobose shape, total soluble solids 33 %. The fruits of zone 1 at harvest 8 months and zone 3 took 9 months to be harvested, in the rest of the characteristics evaluated were exceeded by the fruits of zone 2. To characterize the canistel (P. campechiana) leaf and identify accessions or cultivars, the three main variables, according to the principal component analysis were: leaf area, perimeter, and minor diameter. The three zones where canistel fruits and leaves were characterized are important and can be recommended for propagation in zones with favorable climatic conditions for fruiting in tropical and subtropical regions of Mexico.

E2F4 was initially described as a transcription factor with a key function in the regulation of cell quiescence. Nevertheless, a number of recent studies have established that E2F4 can also play a relevant role in cell and tissue homeostasis as well as tissue regeneration. For these non-canonical functions, E2F4 can also act in the cytoplasm, where it is able to interact with many homeostatic and synaptic regulators. Since E2F4 is expressed in the nervous system, it may fulfill a crucial role in brain function and homeostasis, being a promising multifactorial target for neurodegenerative diseases and brain aging. The regulation of E2F4 is complex as it can be chemically modified through acetylation, from which we present evidence in the brain, as well as methylation, and phosphorylation. The phosphorylation of E2F4 within a conserved threonine motif induces cell cycle re-entry in neurons, while a dominant negative form of E2F4 (E2F4DN), in which the conserved threonines have been substituted by alanines, has been shown to act as a multifactorial therapeutic agent for Alzheimer’s disease (AD). We have generated transgenic mice neuronally expressing E2F4DN. We have recently shown using this mouse strain that expression of E2F4DN in 5xFAD mice, a known murine model of AD, improved cognitive function, reduced neuronal tetraploidization, and induced a transcriptional program consistent with modulation of amyloid-beta (Abeta) peptide proteostasis and brain homeostasis recovery. 5xFAD/E2F4DN mice also showed reduced microgliosis and astrogliosis in both cerebral cortex and hippocampus at 3-6 months of age. Here we have analyzed the immune response in 1 year-old 5xFAD/E2F4DN mice, concluding that reduced microgliosis and astrogliosis is maintained at this late stage. In addition, the expression of E2F4DN also reduced age-associated microgliosis in wild-type mice, thus stressing its role as a brain homeostatic agent. We conclude that E2F4DN transgenic mice represent a promising tool for the evaluation of E2F4 as a therapeutic target in neuropathology and brain aging.

This study determines the equivalent stress intensity factor (SIF) model that best fits the experimental behavior of low-carbon steel under mixed mode (I and II). The study assessed Tanaka, Richard, and Pook's equivalent SIF models. The theoretical values used for comparison correspond to experimental results in a modified C(T) geometry by machining a hole ahead of the crack tip subjected to fatigue loads with a load ratio of R = 0.1. The comparison involved the SIF for six experimental points and the values computed through the numerical simulation. The Paris, Klesnil, and modified Forman-Newman crack growth models were used with each equivalent SIF to analyze the prediction in the estimated number of cycles. The Klesnil model showed the closest prediction since the error between the calculated and experimentally recorded number of cycles is the lowest. However, the material behavior reflects a reduced crack propagation rate attributed to plasticity in the crack tip. Results suggest that Asaro equivalent SIF conservatively estimates the element lifespan with increasing errors from 2.3% at the start of growth to 27 % at the end of the calculation.

In recent years, the use of long-term seismic monitoring systems for the protection of structures is becoming increasingly widespread. This is because more and more awareness is gradually developing regarding the importance of keeping structures under observation so as to prevent any damage scenarios. Within the field of Structural Health Monitoring, data driven techniques allow to process and analyze data collected on site. This paper presents a Mode Tracking procedure to obtain the time-histories of the natural frequencies of a monumental structure. The procedure is applied on the Sanctuary of Vicoforte, an important monumental structure site in Piedmont known for its imposing oval dome and characterized by a permanent structural monitoring system. Through the procedure presented in the paper it has been possible to obtain and observe the time series of the first natural frequencies of the structure considering various aspects, including the temperature variation.

Among the plant resources in pre-Columbian Mexico and Central America, the Chia (Salvia hispanica L.) is unique in being the only member of the Lamiaceae cultivated for the mericarps. Recently the crop has gained considerable attention due to its high of content omega-3 polyunsaturated fatty acid, antioxidants, fibre and protein classifying it as a nutraceutical.

Structural deformations are one of the most significant factor that affects machine tool (MT) positioning accuracy. These induced errors are complex to be represented by a model, nevertheless they need to be evaluated and predicted in order to increase the machining performance. This paper presents a novel approach to calibrate a machine tool in real-time, analyzing the thermo-mechanical errors through Fibre Bragg Grating (FBG) sensors embedded in the MT frame. The proposed configuration consists of an adaptronic structure of passive materials, Carbon Fibre Reinforced Polymers (CFRP), equipped by FBG sensors that are able to measure in real-time the deformed conditions of the frame. By using a proper thermo-mechanical kinematic model, the displacement of the end effector may be predicted and corrected when it is subjected to external undesired factors. By starting from a set of FE simulations to develop a model able to describe the MT structure stresses, a prototype has been fabricated and tested. The scope was to compare the numerical model with the experimental tests using FBG sensors. The experimental campaign has been performed varying the structure temperature over time and measuring the tool tip point (TTP) positions. The obtained results showed a substantial matching between the real and the predicted position of TTP confirming the effectiveness of the proposed calibration system.

Currently, the use of sustainable chemistry as an ecological alternative for the generation of products or processes, free of polluting substance has assumed a preponderant role. The aim of this work is propose a bioinspired, facile, at low cost, non-toxic and environmentally friendly alternative to obtaining magnetic nanoparticles whit a majority phase of magnetite (Fe₃O₄). Is important to empathize that the synthesis was based on the chemical reduction through the Cnicus Benedictus extract, whose use as reducing agent has not been reported in the synthesis of iron oxides nanoparticles. In addition, the Cnicus Benedictus is abundant endemic plant in Mexico, with several medicinal properties and a large number of natural antioxidants. The obtained nanoparticles exhibited significant magnetic and antibacterial properties and an enhanced photocatalytic activity. The crystallite size of the Fe₃O₄ nanoparticles (Fe₃O₄ NP’s) was calculated by Williamson-Hall method. The photocatalytic properties of the Fe₃O₄ NP´s were studied by kinetics absorptions models in the Congo red (CR) degradation. Finally the antibacterial effect of the Fe3O4 NP´s were evaluated mediated the Kirby-Bauer method against E. coli and S. aureus bacteria. This route offers a green alternative to obtain Fe3O4 NP´s with remarkable magnetic, photocatalytic and antibacterial properties.

Background: The maximal one-repetition test (1-RM) is widely used in scientific research; however, there are conflict results regarding its reproducibility in elderly population. The present study aimed to analyze the reproducibility the test both before and after a 12 week training period by using the bench press and leg press 45° 1-RM tests in the elderly taking into consideration the training experience and strength level of the women. Methods: Elderly women (n = 376; age, 68.5 ± 14.1 years; height, 162.7 ± 5.5 cm; body mass, 71.2 ± 16.0 kg) who underwent ≥3 months of resistance training performed an initial week of familiarization and a second week of testing and retest, with a 48–72 hour interval. Results: The results showed maximal and relative load strength of 39.3 kg and 0.59 kg/body mass for lower limbs and 20.9 kg and 0.31 kg/body mass for upper limbs. The Kappa indices were 0.93 and 0.95, and the intraclass correlation coefficients were 0.99 and 0.99 for the lower and upper limbs, respectively. Conclusion: Therefore, the present study confirms that the 1-RM test has high reliability and reproducibility in the elderly, for both upper and lower limbs.

Background: Multiple system atrophy (MSA) is a rapidly progressive neurodegenerative disorder that has no curative treatment. Diagnosis is based on a set of criteria established by Gilman (1998 and 2008) and recently updated by Wenning (2022). We aim to determine the effectiveness of [123I]Ioflupane SPECT in MSA, especially at the initial clinical suspicion. Methods: Cross-sectional study of patients at initial clinical suspicion of MSA, referred for [123I]Ioflupane SPECT. Results: 139 patients (68 men, 71 women) were included, 104 being MSA-probable and 35 MSA-possible. MRI was normal in 89.2% while SPECT was positive in 78.45%. SPECT showed high sensitivity (82.46%) and positive predictive value (86.24), reaching maximum sensitivity in MSA-P (97.26%). Significant differences were found when relating both SPECT assessments in the healthy-sick and inconclusive-sick groups. We also found an association when relating SPECT to the subtype (MSA-C or MSA-P), as well as to the presence of parkinsonian symptoms. Lateralization of striatal involvement was detected (left side). Conclusions: [123I]Ioflupane SPECT is a useful and reliable tool for diagnosing MSA, with good effectiveness and accuracy. Qualitative assessment shows a clear superiority when distinguishing between the healthy-sick categories, as well as between the parkinsonian (MSA-P) and cerebellar (MSA-C) subtypes at initial clinical suspicion.

This review delves into the critical role of automation and sensor technologies in optimizing parameters for thermal treatments within electricity power generation. The demand for efficient and sustainable power generation has led to a significant reliance on thermal treatments in power plants. However, ensuring precise control over these treatments remains challenging, necessitating the integration of advanced automation and sensor systems. This paper evaluates the pivotal aspects of automation, emphasizing its capacity to streamline operations, enhance safety, and optimize energy efficiency in thermal treatment processes. Additionally, it highlights the indispensable role of sensors in monitoring and regulating crucial parameters such as temperature, pressure, and flow rates. These sensors enable real-time data acquisition, facilitating immediate adjustments to maintain optimal operating conditions and prevent system failures. It explores the recent technological advancements, including machine learning algorithms and IoT integration, which have revolutionized automation and sensor capabilities in thermal treatment control. Incorporating these innovations has significantly improved the precision and adaptability of control systems, resulting in heightened performance and reduced environmental impact. This review underscores the imperative nature of automation and sensor technologies in thermal treatments for electricity power generation, emphasizing their pivotal role in enhancing operational efficiency, ensuring reliability, and advancing sustainability in power generation processes.

Steel is one of the essential materials in the world's civilization. It is essential to produce many products such as pipelines, mechanical elements in machines, vehicles, profiles, and beam sections for buildings in many industries. Until the '50s of the 20th century, steel products required a complex process known as ingot casting; for years, steelmakers focused on developing and simplifying this process. The result was the con-tinuous casting process (CCP); it is the most productive method to produce steel. The CCP allows producing significant volumes of steel sections without interruption and is more productive than the formal ingot casting process. The CCP begins by transferring the liquid steel from the steel-ladle to a tundish. This tundish or vessel distributes the liquid steel, by flowing through its volume, to one or more strands having wa-ter-cooled copper molds. The mold is the primary cooling system, PCS, solidifying a steel shell to withstand a liquid core and its friction forces with the mold wall. Further down the mold, the rolls drive the steel section in the SCS. Here the steel section is cooled, solidifying the remaining liquid core, by sprays placed in every cooling segment all around the billet and along the curved section of the machine. Finally, the steel strand goes towards a horizontal-straight free-spray zone, losing heat by radiation mechanism, where the billet cools down further to total solidification. A moving torch cutting-scissor splits the billet to the desired length at the end of this heat-radiant zone.

Lycoriella species (Sciaridae) are responsible for significant economic losses in greenhouse production (e.g. mushrooms, strawberry, and nurseries). Current distributions of species in the genus are restricted to cold-climate countries. Three species of Lycoriella are of particular economic concern in view of their ability to invade across the Northern Hemisphere. We used ecological niche models to determine the potential for range expansion under climate change future scenarios (RCP 4.5 and RCP 8.5) in distributions of these species of Lycoriella. Stable suitability under climate change was a dominant theme in these species; however, potential range increases were noted for key countries (e.g. USA, Brazil, and China). Our results illustrate the potential for range expansion in these species in the Southern Hemisphere, including some of the highest greenhouse production areas in the world.

Many studies in the field of robot navigation have focused on environment representation and localization. The goal of map representation is to summarize spatial information in topological and geometrical abstracts. By providing strong priors, maps improve the performance and reliability of automated robots. Due to the transition to fully automated driving in recent years, there has been a constant effort to design methods and technologies to improve the precision of road participants and the environment's information. Among these efforts is the High Definition (HD) Map concept. Making HD maps requires accuracy, completeness, verifiability, and extensibility. Because of the complexity of HD mapping, it is currently expensive and difficult to implement, particularly in an urban environment. In an urban traffic system, the road model is at least a map with sets of roads, lanes, and lane markers. While more research is being dedicated to mapping and localization, a comprehensive review of the various types of map representation is still required. This paper presents a brief overview of map representation, followed by a detailed literature review of HD Map for automated vehicles. The current state of AV mapping is encouraging, the field has matured to a point where detailed maps of complex environments are built in real-time and have been proved useful. Many existing techniques are robust to noise and can cope with a large range of environments. Nevertheless, there are still open problems for future research. AV mapping will continue to be a highly active research area essential to the goal of achieving full autonomy.

Currently, the most important challenge in any assessment of state-of-the-art sensor technology and its reliability is to achieve road traffic safety targets. The research reported in this paper is focused on the design of a procedure for evaluating the reliability of Internet-of-Things (IoT) sensors and the use of a Cyber-Physical System (CPS) for the implementation of that evaluation procedure to gauge reliability. An important requirement for the generation of real critical situations under safety conditions is the capability of managing a co-simulation environment, in which both real and virtual data sensory information can be processed. An IoT case study that consists of a LiDAR-based collaborative map is then proposed, in which both real and virtual computing nodes with their corresponding sensors exchange information. Specifically, the sensor chosen for this study is a Ibeo Lux 4-layer LiDAR sensor with IoT added capabilities. Implementation is through an artificial-intelligence-based modeling library for sensor data-prediction error, at a local level, and a self-learning-based decision-making model supported on a Q-learning method, at a global level. Its aim is to determine the best model behavior and to trigger the updating procedure, if required. Finally, an experimental evaluation of this framework is also performed using simulated and real data

Nanoporous carbons were prepared by chemical and physical activation from mangosteen peel-derived chars. The removal of atrazine was studied due to the bifunctionality of the N-groups. Pseudo-first-order, pseudo-second order and intraparticle pore diffusion kinetic models were analyzed. Adsorption isotherms were also analyzed according to Langmuir and Freundlich models. Results obtained were compared against two commercial activated carbons with comparable surface chemistry and porosimetry. The highest uptake was found for the carbons with higher content of basic surface groups. The role of the oxygen-containing groups on the removal of atrazine was estimated experimentally by the surface density. Results were compared with the adsorption energy of atrazine theoretically estimated on pristine and functionalized graphene with different oxygen-groups using periodic DFT methods. The energy of adsorption follows the same trend observed experimentally, namely the more basic the pH the more favored is the adsorption of atrazine. Micropores play an important role in the uptake of atrazine at low concentration but the presence of mesoporous is also required to inhibit the pore mass diffusion limitations. The present work contributes to the understanding of the interactions between triazine-based pollutants and the surface functional groups on nanoporous carbons in the liquid-solid interface.

This paper explores various aspects of microbiology and immunology, focusing on the epidemiology and molecular characterisation of infectious diseases in the Caribbean and South America. Key areas of investigation include tuberculosis (TB), nosocomial infections, Salmonella infections, and bloodborne pathogens. A retrospective study in Jamaica underscores the high mortality rates in HIV-positive TB patients and the need for early HIV diagnosis and integrated care. Research in Trinidad and Tobago reveals the genetic diversity of Mycobacterium tuberculosis strains, highlighting high HIV-TB co-infection rates. The paper also examines the challenges posed by nosocomial infections, particularly those caused by antibiotic-resistant Gram-negative bacteria and methicillin-resistant Staphylococcus aureus (MRSA), and emphasises the importance of infection control. In addition, the study investigates Salmonella prevalence in poultry in Jamaica and the risks associated with foodborne infections. The paper further explores transfusion-transmitted infections and the development of IgM antibodies in egg whites for bacterial antigen detection. Lastly, it addresses immune responses in patients with immunodeficiency disorders, such as severe combined immunodeficiency (SCID) and chronic granulomatous disease (CGD), highlighting their susceptibility to a wide range of infections.

In this work, the structural, magnetic, and mechanical properties of Nd16Fe76-xCoxB8 alloys varying the Co content at x = 0, 10, 20 and 25, were experimentally investigated by X-Ray Diffraction (XRD), Mössbauer Spectrometry (MS), Vibrating Sample Magnetometry (VSM) at room temperature (RT), and microhardness test were performed too. The system presents the hard Nd2Fe14B and the Nd1.1Fe4B4 phases for samples with x = 0 and 10. When concentration increases to x= 20 and 25, the CoO phase appears. All MS show the ferromagnetic behavior (eight sextets: sites 16k1, 16k2, 8j1, 8j2, 4c, 4e, sb) associated to the hard and soft magnetic phases, and one paramagnetic component (doublet: site d) associated to the minority Nd1.1Fe4B4 phase, which was not identified by XRD. All samples are magnetically hard present a hard magnetic behavior. The increase of Co content in these samples did not improve the hard magnetic behavior, but increased the critical temperature of the system and decrease the crystallite size of the hard phase. The hysteresis loop showed that predominates the Nd2Fe14B hard magnetic phase. There is a general tendency to increase microhardness with cobalt content, attributable to cobalt doping reduces the lattice parameters and porosities in the sample improving it hardness.

Solid polymer electrolytes and composite polymer electrolytes serve as crucial components in all-solid-state energy storage devices. Structural batteries and supercapacitors present a promising alternative for electric vehicles, integrating structural functionality with energy storage capability. However, despite their potential, these applications are hampered by various challenges, particularly in the realm of developing new solid polymer electrolytes that require more investigations. In this study, novel solid polymer electrolytes and composite polymer electrolytes were synthesized using epoxy resin blends, ionic liquid, lithium salt, and alumina nanoparticles, and subsequently characterized. Among the formulations tested, the optimal system, designated as L70P30ILE40Li1MAl2 and containing 40 wt.% of ionic liquid and 5.7 wt.% of lithium salt, exhibited exceptional mechanical properties. It displayed a remarkable storage modulus of 1.2 GPa and reached ionic conductivities of 0.085 mS/cm at 60°C. Furthermore, a proof-of-concept supercapacitor was fabricated, demonstrating the practical application of the developed electrolyte system.

In order to monitor the diversity of terrestrial biomes, the Earth Exploration Satellite Services demand a high data rate for downlink transmissions while sharing their frequency spectrum with, and suffering interferences from, cellular Base Stations. Both highlight the dilemmas of spectral efficiency (bps/Hz) and spectral coexistence. Our research aims to mitigate interference on low orbit satellite downlinks using Cognitive Radio (CR) and Adaptive MODulation and CODing (MODCOD) techniques. To fulfill this: 1) we present CR approaches to enhance spectrum exploitation. Next, 2) we detail Adaptive MODCOD (ACM) technique to increase RF power and spectral efficiencies. Then, 3) we suggest the solution by combining 1) and 2). Afterwards, 4) we analyze it by monitoring the signal to interference plus noise ratio and the CR/MODCOD strategy. Finally, 5) we provide case studies to demonstrate the strategy’s effectiveness through the practical operation of satellite services, and 6) we conduct a bench test of the communication system.

Smart cities will have a strong impact on the future of renewable energies as terms like sustainability and energy saving will be more common. In this sense, both of wind and hydrokinetic compact-size turbines, can play an important role in urban communities by providing energy to nearby consumption points in an environmentally suitable way. This work presents the experimental evaluation for a vertical-axis turbine Darrieus type, operating in an open-field wind tunnel and a confined water channel. Power and characteristic curves have been obtained for all test conditions, also the effect of turbine blockage has been evaluated under blockage values ranging from 6.8% to 35%. The peak power coefficient for the confined flow condition reached a value of 0.31 which is 1.5 times higher than the peak one for the experimental open field condition at the same Reynolds number and a blockage of 20%. Finally, two blockage correction equations have been applied to the water channel tests, which gave values quite similar to the results obtained from the wind tunnel.

Transcriptional regulation constitutes a key step in gene expression regulation. Myocyte enhancer factor 2C (MEF2C) is a transcription factor of MADS box family involved in the early development of several cell types including muscle cells. Over the last decade a novel layer of complexity modulating gene regulation is emerging as non-coding RNAs have been identified, impacting in both transcriptional and post-transcriptional regulation. microRNAs represent the most studied and abundantly expressed subtype of small non-coding RNAs and their functional role have been widely documented. On the other hand, our knowledge on the transcriptional and post-transcriptional regulatory mechanisms that drive microRNA expression is still incipient. We recently demonstrated that MEF2C is able to transactive the long, but not short, regulatory element upstream of miR-23a-miR-27a-miR-24-2 transcriptional start site. However, MEF2C over-expression and silencing, respectively, displayed distinct effects on each of the miR-23a-miR-27a-miR-24-2 mature cluster members, without affecting pri-miRNA expression levels, supporting thus additional MEF2C-driven regulatory mechanisms. Within this study we demonstrated a complex post-transcriptional regulatory mechanisms directed by MEF2C in the regulation of miR-23a-miR-27a-miR-24-2 cluster members, distinctly involving different domains of the MEF2C transcription factor and the physical interaction with pre-miRNAs and RNA interacting proteins such as Ksrp, HnRNPa3 and Ddx17.

This article describes the synthesis of hydroxyapatite (HAp) flakes through a microwave-assisted hydrothermal method. These flakes are intended for use as substrates for depositing titanium dioxide (TiO2) films using chemical vapor deposition with metal–organic precursors (MOCVD). The results reveal the formation of crystalline hydroxyapatite characterized by a uniform mor-phology. Additionally, we demonstrated the successful deposition of TiO2 coatings on the hy-droxyapatite flakes, resulting in a distinctive faceted prism morphology. Our findings affirm the effective synthesis of the HAp/TiO2 composite material. To further explore the material’s practical applications, we recommend assessing the photocatalytic activity of these composite membranes in future research.

Nowadays, the transparency of governments with respect to the sustainability of public services is a very interesting issue for stakeholders and academics. It has led to previous research and international organisations (EU, IMF, OECD, United Nations, IFAC, G-20, World Bank) to recommend promotion of the online dissemination of economic, social and environmental information. Based on previous studies about e-government and the influence of administrative cultures on governmental accountability, this paper seeks to identify political actions useful to improve the practices of transparency on economic, social and environmental sustainability in European local governments. We perform a comparative analysis of sustainability information published on the websites of 72 local governments in 10 European countries grouped into main three cultural contexts (Anglo-Saxon, Southern European and Nordic). Using international sustainability reporting guidelines, our results reveal significant differences in local government transparency in each context. The most transparent local governments are the Anglo-Saxon ones, followed by Southern European and Nordic governments. Based on individualized empirical results for each administrative style, our conclusions propose useful policy interventions to enhance sustainability transparency within each cultural tradition, such as development of legal rules on transparency and sustainability, tools to motivate local managers for online diffusion of sustainability information and analysis of information needs of stakeholders.

The analysis of social media content plays a crucial role in uncovering intricate user behaviors and trends across diverse digital platforms. Social media is inherently multimodal, incorporating texts, images, audios, and videos, each offering unique insights into user engagement and preferences. Traditional classification methods often focus narrowly on the most prominent modality, typically neglecting the synergistic potential of integrating multiple data types. To address this gap, we introduce the Unified Multimodal Classifier (UMC), a suite of streamlined models that adeptly harness and integrate these varied modalities. UMC leverages a novel architecture that combines a pooling layer with auxiliary learning tasks, facilitating the formation of a robust and shared feature space. This integration allows UMC to not only accommodate but also capitalize on the inherent diversity of social media data. The models are designed to be inherently flexible, adjusting to the availability of data modalities and maintaining high classification accuracy under varied conditions. In emotion classification scenarios, UMC has shown exceptional performance, significantly outperforming traditional methods by effectively synthesizing information across modalities. Its robustness is highlighted in its ability to deliver consistent results, even in the absence of one or more modalities. The simplicity and efficiency of UMC make it a potent tool for social media analytics, enabling it to achieve higher accuracies and maintain effectiveness even with limited data inputs. This adaptive capability ensures that UMC can be deployed in real-world applications where data incompleteness is common, thus broadening the scope of its applicability in various analytical contexts.

In this work, we introduce the TriFusion Network, an innovative deep learning framework designed for the simultaneous analysis of auditory, visual, and textual data to accurately assess emotional states. The architecture of the TriFusion Network is uniquely structured, featuring both independent processing pathways for each modality and integrated layers that harness the combined strengths of these modalities to enhance emotion recognition capabilities. Our approach addresses the complexities inherent in multimodal data integration, with a focus on optimizing the interplay between modality-specific features and their joint representation. Extensive experimental evaluations on the challenging AVEC Sentiment Analysis in the Wild dataset highlight the TriFusion Network's robust performance. It significantly outperforms traditional models that rely on simple feature-level concatenation or complex score-level fusion techniques. Notably, the TriFusion Network achieves Concordance Correlation Coefficients (CCC) of 0.606, 0.534, and 0.170 for the arousal, valence, and liking dimensions respectively, demonstrating substantial improvements over existing methods. These results not only confirm the effectiveness of the TriFusion Network in capturing and interpreting complex emotional cues but also underscore its potential as a versatile tool in real-world applications where accurate emotion recognition is critical.

Diesel contamination of farming soils is of great concern because hydrocarbons are toxic to all forms of life and can potentially enter the food web through crops or plants used for remediation. Data on plant ability to uptake, translocate and accumulate diesel-derived compounds are controversial not only due to the probable diverse attitude of plant species but also because of the lack of a reliable method to distinguish petrogenic from biogenic compounds in plant tissues. The purpose of this study was to set up a GC-MS-based protocol enabling the determination of diesel-derived hydrocarbons in plants grown in contaminated soil for assessing human and ecological risks, predicting phytoremediation effectiveness and biomass disposal. To this aim two plant species Vicia sativa L. and Secale cereale L., belonging to two diverse vascular plant families, were used as plant models. They were grown in soil spiked with increasing concentrations of diesel fuel and the produced biomass was used to set up the hydrocarbon extraction and GC-MSD analysis. The developed protocol was also applied to the analysis of Typha latifolia L. plants, belonging to a different botanical family and grown in a long-time and highly contaminated natural soil. Results showed the possibility of distinguishing diesel-derived compounds from biogenic hydrocarbons in most terrestrial vascular plants, just considering the total diesel compounds in the n-alkanes carbon range C10-C26, where the interference of biogenic compounds is negligible. Diesel hydrocarbons quantification in plant tissues was strongly correlated (0.92<r2<0.99) to the concentration of diesel in spiked soils, suggesting a general ability of the considered plant species to adsorb and translocate relative low amounts of diesel hydrocarbons and the reliability of the developed protocol.

Polyvinyl alcohol (PVA) is highly compatible polymer with biological environments. Specifically, it has been used as a trap for different types of microorganisms in Bio-MEMS, and its properties can be modified to act as an electrode for electrochemical analysis. This study presents a nano-composite developed with PVA, multiwall carbon nanotubes (CNTs) doped with nitrogen, which changes the electrical properties of the polymer and its viscosity to obtain nanofibers by electro-spinning. The proposed nanocomposite was characterized using Fourier transform-infrared and Raman spectroscopy techniques, confirming the presence of the CNTs immersed in the polymer. High-resolution transmission electron microscopy was used to obtain the micrographs that showed the characteristic interplanar distances of the multiwall CNT in the polymeric matrix with values of 3.63 Å. Finally, the CNx mats were exposed to various aqueous solutions in a po-tentiostat to demonstrate the effectiveness of the nanofibers for electrochemical analysis. The CNx-induced changes in the electrical properties of the polymer were identified using cyclic voltammograms, while the electrochemical analysis revealed supercapacitor behavior.

Extracellular vesicles (EVs) are lipid bilayer envelopes that encapsulate cell-specific cargo, rendering them promising biomarkers for diverse diseases. Chagas disease, caused by the parasite Trypanosoma cruzi, poses a significant global health burden, transcending its initial epicenter in Latin America to affect individuals in Europe, Asia, and North America. In this study, we aimed to characterize circulating EVs derived from patients with chronic Chagas disease (CCD) experiencing reactivation of acute symptoms. Blood samples collected in EDTA were processed to isolate plasma and subsequently subjected to ultracentrifugation for particle isolation and purification. The EVs were characterized using nanoparticle tracking analysis and enzyme-linked immunosorbent assay (ELISA). Our findings revealed distinctive differences in size, concentration, and composition of EVs between immunosuppressed patients and those with CCD. Importantly, these EVs play a critical role in the pathophysiology of Chagas disease and demonstrate significant potential as biomarkers in the chronic phase of the disease. Overall, our findings support the potential utility of the CL-ELISA assay as a specific sensitive tool for detecting circulating EVs in chronic chagasic patients, particularly those with recurrent infection following immunosuppressive treatment or with concurrent HIV and Chagas disease. Further investigations are warranted to identify and validate the specific antigens or biomarkers responsible for the observed reactivity in these patient groups, which may have implications for diagnosis, monitoring of treatment and prognosis.

Although prior research has extensively examined the association of emotional intelligence (EI) with various job attitudes (e.g., job satisfaction), the empirical and systematic investigation of this link within military institutions has captured considerably less research attention. The present research analyzed the relationship between EI, teamwork communication, and job satisfaction among Spanish military cadets. We tested the potential unique contribution of EI to job satisfaction over and above demographics (i.e., gender and age), proactive personality, and resilience. Moreover, we also examined whether EI indirectly affects job satisfaction via its relationship with teamwork communication. A sample of 363 cadet officers of the Spanish General Military Academy completed questionnaires assessing EI, teamwork communication, proactive personality, resilience, and job satisfaction. Our results revealed that EI exhibited incremental variance in predicting job satisfaction even after accounting for demographics, proactive personality, and resilience. Additionally, we found that the effect of EI on job satisfaction was partially driven by enhanced teamwork communication. This research provides empirical evidence suggesting a pathway (i.e., effective teamwork communication) through which EI helps military cadets to experience higher job satisfaction. Implications for future academic programs including EI and teamwork communication to promote positive job attitudes among military personnel are discussed.

The work consisted in identifying possible effects from heavy metals (HMs) pollution due to waste disposal activities in three potentially polluted sites located in Basilicata (Italy), where a release of pollutants with values over the thresholds allowed by the Italian legislation was detected. The potential variations in the physiological efficiency of vegetation have been analyzed through the multitemporal processing of satellite images. In detail, Landsat 5 Thematic Mapper (TM) and Landsat 8 Operational Land Imager (OLI) images were used to calculate the Normalized Difference Vegetation Index (NDVI) trend over the years. Then, the multitemporal trends were analyzed using the median of Theil-Sen, a non-parametric estimator particularly suitable for the treatment of remote sensing data, being able to minimize the outlier effects due to exogenous factors. Finally, the subsequent application of the Mann-Kendall test on the trends identified by Theil-Sen slope allowed the evaluation of trends significance and, therefore, the areas characterized by the effects of contamination on vegetation. The application of the procedure to the three survey sites led to the exclusion of the presence of significant effects of HMs contamination on the vegetation surrounding the sites during the years of waste disposal activities.