Musabaqah Tilawatil Qurân (MTQ/Al Quran Reciting Competition) is often regarded as a big and important momentum for the process of Islamic preaching in Indonesia. It has even become a tradition for Indonesian people, although Al-Quran reciting is a common activity and a universal phenomenon in the Islamic world. In the MTQ event, the participants compete at various fields, including Tilawah (the art of reciting Al-Quran), Fahmil Qurân (comprehension of Al-Quran contents), and hifzul Qurân (memorization of Al-Quran verses). In 2003, a new field was initiated in the MTQ competition; i.e Musabaqah Makalah Ilmiah Al-Qurân (M2IQ/Al-Qurân Academic Writing Competition). Since its first exhibition on the 2003 Regional MTQ in West Java Province, and later on the 2008 National MTQ, the M2IQ, which is based on written-preach (dakwah bilkitabah), is considered as an innovation of preaching method in Indonesia. Islamic preaching (dakwah) in Indonesia has always been leaning heavily on the oral-preaching (dakwah bilisan) method, as represented by other fields contested in an MTQ. This development warrants a comprehensive study to understand what considerations underlying the emergence of M2IQ, how the process is, and what contributions it provides to the development of Islamic preaching in Indonesia. This study utilizes analytic-descriptive approach to discover the phenomenon. The findings indicate that M2IQ has accentuated the intellectual aspect of MTQ. In addition, M2IQ widens the spectrum of Al-Qurân preaching in Indonesia; opening a new chapter of Islamic preaching (dakwah) in the country.

Universitas Gadjah Mada (UGM) is implementing the concept of green campus by various means including through elements in its sustainable campus development plan. With regards to several factors related to Energy and Climate Change indicators set by UI GreenMetric, this research examined the existing condition of the area of UGM which belongs to academic zone in order to construct a proposal based on a building mass reconfiguration. This proposal was aimed to improve the implementation of energy-specific green campus concept within the Forestry cluster area as a sample case study. This selection was based on the average value of the Building Coverage Ratio (BCR) values in all of the clusters; thus, the scenario was relevant for generalization and could be replicated in other clusters in the university. The study was done in three stages of simulation, and was based on a series of digital simulation of sunlight hour and solar radiation run in Grasshopper using Lady Bug environmental analysis plug-in for a period of five summer months during the building office hours. Following the reconfiguration, results had shown a similar downtrend between the amount of sunlight hour and solar radiation in the area (up to 49% and 45% respectively on building envelopes, and up to 44% and 42% respectively on landscaping surfaces). This reduction indicated a potential of energy efficiency by applying selective building mass reconfiguration as a passive design strategy that goes hand in hand with the campus’s development policy to optimize the use of BCR for a greener UGM campus through its many undergoing and upcoming redevelopment projects.

Along with the rapid development of technology and industry, the need for energy storage has become fundamental. One promising energy storage devices is the supercapacitor. Several type supercapacitors are available, one of which is the electrical double-layer capacitor made from carbon graphite and multiwalled carbon nanotubes (MWCNTs). In this study, we combined these two materials into a working electrode in a three-electrode system. In the morphological analysis using scanning electron microscope, transmission electron microscope, and X-ray diffraction, the two materials were found to have formed a composite on the surface. In the electrochemical analysis, two types of testing were conducted using cyclic voltammetry and electrochemical impedance spectroscopy. Electrochemical analysis was carried out on five electrolyte concentrations of Na2SO4 from 1 to 6 M. The capacitance produced at concentrations of 1, 2, 3, 4, and 5 M were 34.395, 35.808, 46.284, 49.502, and 76.815 F/g, respectively. At an electrolyte concentration of 5 M Na2SO4, an energy density of 27.312 Wh/Kg and a power density of 343.786 W/Kg were produced. Meanwhile on concentration of 6 M, the surface of the electrode was damaged.

A galvalume corrugated sheet was utilized as formwork for a reinforced concrete beam in flexure. A numerical model was validated to the experimentally obtained data, and further adopted to simulate the behavior of this composite structure under elevated temperatures. The properties and constitutive stress-strain data of the basic materials were obtained from experiments, and superimposed into the finite element model. The study concluded that the load carrying capacity of the member decreased as a direct function on temperature increase, and the cracking moment was very sensitive to the temperature fluctuation. The elevated temperatures also altered the failure mode.

This study aims to determine the impact of the type of ICT usage on household income from main vegetables, agriculture (including main vegetables), and total income. This study is based on surveys and interviews with vegetable farmers using structured questionnaires conducted in three villages in Indonesia, including Cianjur, Sleman, and Malang in West Java, Yogyakarta, and East Java, respectively. The data were collected from 375 respondents selected in each region from November 2021 to March 2022. An econometric model called the multivariate linear regression (MLR) model is used to assess heterogeneous factors that influence the possibility of increasing the income of vegetable farmers. The study found that variables that use ICT as a primary variable, household, marketing, geographical characteristics, and immediate source information in agriculture have a significant impact on household income (P < 0.01) from primary vegetables, agriculture, and total income, with multiple R squares of 70.5, 72.0, 73.7% and F statistics of 28.48, 30.66, and 33.34, respectively. In summary, this novel study shows that the five categories of information technology used in farming and selling of harvest have a positive impact on household incomes

Significant amount of oil remains in the reservoir after primary and secondary operations and to recover the remaining oil, enhanced oil recovery (EOR) can be applied as one of the feasible options remaining nowadays. In this study new nano polymeric materials have been prepared from purple yam and cassava starches. The yield of purple yam nanoparticles (PYNPs) was 85% and that of cassava nanoparticles (CSNPs) is 90.53%. Synthesized materials were characterized through particle size distribution (PSA), zeta potential distribution, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). The performance of PYNPs in recovering oil was better than CSNPs as found from recovery experiments. Zeta potential distribution results confirmed the stability of PYNPs over CSNPs (-36.3 mV for PYNPs and -10.7 mV for CSNPs). The optimum concentration for these nanoparticles has been found from interfacial tension measurements and rheological properties and it was 0.60 wt.% for PYNPs and 0.80 wt.% for CSNPs. More incremental recovery (33.46%) has achieved for the polymer that contained PYNPs in comparison to the other nano-polymer (31.3%). This opens the inception for a new technology for polymer flooding that may replace the conventional method that depends on partially hydrolyzed polyacrylamide (HPAM).

Livestock is an integral part of agriculture which significantly contributes to the economic and socio-economic development. Based on its potential in natural resources and human resources, East Kalimantan Province has opportunity to become a beef cattle development area. The development of a corporate-based beef cattle breeding area is an approach which taken toward industrial and business-oriented beef cattle breeding. The concept of breeder corporation will create new strengths such as strengths in human resources, capital, and banking in business development, which can more open the opportunities for the success and growth of the breeder's business. The development of a corporate-based beef cattle breeding area provides opportunities, including: 1) improving the competitiveness and added value of the region and beef cattle commodities in order to support national sustainable food security; 2) strengthening the livestock business system in one area management in a holistic manner; and 3) strengthening breeders institutions in accessing information, technology, public facilities and infrastructure, capital, processing and marketing, so that the concept is expected to be applied in East Kalimantan Province.

The use of cow bones for biomaterial is still limited; accordingly, the cow bones waste has low economic value. Basically, a human’s and a cow’s bones are the same in terms of their forming compound. Aluminum (Al) has the potential to combine with hydroxyapatite (HAp) to make metal matrix composites (MMC) that have the potential for biomaterials. Compatible elements to be combined with Al and HAp are magnesium (Mg), titanium (Ti), and Copper (Cu), used self-high propagating temperatures synthesis (SHS). MMC can be processed to be a useful, solid product. Applying pressure to the SHS reaction and heating process may result in biomaterial composite product consisting of some matrix materials such as Al come from cans materials used in the experiment was HAp that was processed from cow bones calcination, added by can that contained aluminum and wetting agent, namely magnesium. The exothermic temperature was 800-900°C. The compaction process was done to allow materials to be bound. Based on the ASTM F138 standard for element of biomaterials, the porosity value was below 30% and hardness level above 40 HV. Cow bones and can-based composite sample with the composition of HAp-Al-Mg: 85%-10%-5% met the standard since the hardness value was: 73.3 HV with a porosity value of 29.88%.

Generation Y is known as job jumpers because of the desire to earn a higher salary, career opportunities and opportunities to develop themselves. One type of work is a teacher because by becoming a teacher they get a better life, one of which is by getting extra income from the government for those who already have teacher certification, this is what encourages Generation Y to choose this profession. this study uses crosstabs for the data analysis process because the data comes from the LMS database owned by XYZ Campus. Millennial educators who have the highest performance value of PJJ Information Systems for Information System Engineering Cluster with a value of 5.19. The impact of transactions on millennial lecturers on students is able to fulfill any given workload. Appreciate millennial lecturers in tangible and intangible forms.

We consider a model of predator-prey interaction at fractional-order where the predation obeys the ratio-dependent functional response and the prey is linearly harvested. For the proposed model, we show the existence, uniqueness, non-negativity as well as the boundedness of the solutions. Conditions for the existence of all possible equilibrium points and their stability criteria, both locally and globally, are also investigated. The local stability conditions are derived using the Magtinon's theorem, while the global stability is proven by formulating an appropriate Lyapunov function. The occurance of Hopf bifurcation around the interior point is also shown analytically. At the end, we implement the Predictor-Corrector scheme to perform some numerical simulations.

The improvement of mechanical properties of cantala fiber and its composites. Treatments including alkali, silane, and the combination of both were carried out to modify the fiber surface. The influence of chemical treatments on fiber properties such as the degree of crystallinity and tensile strength was investigated. A variety of short cantala fiber reinforced rHDPE composites were produced by hot press, and the effect of fiber treatment on the flexural strength of composites was observed. SEM observations also carried out to highlight these changes. The result shows that alkali treatment improves tensile strength and tensile modulus of alkali treated fiber (NF12) which was predicted as a result of the enhancement of the cellulose crystallinity. In contrast, the tensile strength and tensile modulus of silane (SF05) and alkali-silane treated fiber (NSF05) decreased compared to untreated fiber (UF) which is caused by the addition of amorphous material. The tensile strength of alkali-silane treated fiber (NSF05) was lower than alkali treated fiber (NF12), but the composites prepared with NSF05 showed the highest increment of flexural strength of 25.9%. This may be due the combination of alkali and silane treatment helped in the better formation of fiber-matrix interface adhesion.

To realize sustainable capture fisheries management, Nizam Zachman as an ocean fishing port in practice has taken action to regulate fishing vessels and large pelagic purse seine fishing gear which is a form of control on the application of fishing vessel seaworthiness in an effort to ensure compliance with provisions on safety aspects and the seaworthiness of fishing activities. This study aims to examine and determine the priority strategy of Nizam Zachman ocean fishing port in implementing the seaworthiness of large pelagic purse seine vessels. The analytical method used is descriptive statistics using SWOT and AHP analysis. The results showed that the SWOT analysis based on internal and external factors in the IFAS and EFAS matrices obtained factor values of 0.36 and -0.1 which were located in quadrant IV or the S-T strategy, which mean by strengthening the role of Nizam Zachman ocean fishing port in complying with rules for purse seine owners large pelagic with good supervision in supporting the sustainability of fishery resources. The results of the AHP analysis of prioritising the four implementation aspects of the fishing vessel seaworthiness policy are on the communication aspect (0.346) by means of holding regular outreach; the disposition aspect (0.242) by systematically assessing seaworthiness and the need for evaluation; the resource aspect (0.234) by increasing the number and capacity of fishing vessel seaworthiness inspectors, and on the bureaucratic aspect (0.177), by applying the rules of supervision with prevention through assistance to large pelagic purse seine owners.

This research aims to explore the complex interplay between supply chain resilience (SCR), digital supply chain (DSC), and sustainability, focusing on the moderating influence of supply chain dynamism. The goal is to understand how these elements interact within the framework of contemporary supply chain management and how they collectively contribute to enhancing sustainability outcomes. The sample size is 300 CEOs and managers. The study approach integrates quantitative research methods. Structural equation modeling (SEM) is utilized to quantitatively analyze the direct and indirect effects of SCR and DSC on sustainability. The numerous surveys we conduct among supply chain ecosystem stakeholders provide a rich picture of practical implications and contextual nuances. In sum, our early findings generally support a positive relationship between SCR and sustainability in and of itself decrying the need for more resilient supply networks for sustainability. We further find the beneficial impact of digital technologies in promoting sustainability via enhancing environmental control and controlling for efficiency in supply chains. We also offer evidence to show that supply chain dynamism compounds the positive logic between SCR and DSC and sustainability. As a final word, it must be noted that our work speaks to the burgeoning Supply Chain Dynamism as moderator literature by examining the direct and contingent effects of SCR and DSC on not only performance but sustainability. By shedding light on the moderating role of dynamism, the study provides fresh insights into the multifaceted nature of supply chain management and sustainability practices. The study's findings enhance theoretical understanding by elucidating the synergistic effects of SCR, DSC, and sustainability in dynamic supply chain settings. It augments existing theoretical frameworks by integrating concepts of resilience, digitalization, and sustainability into a comprehensive model. Practical and economical, the research offers actionable guidance for organizations aiming to improve sustainability performance through resilient and digitally advanced supply chains. By acknowledging the role of supply chain dynamism, managers can tailor strategies to manage disruptions effectively and leverage digital innovations. Economically, adopting sustainable practices can result in cost savings and competitive advantages. The research emphasizes the importance of aligning supply chain strategies with sustainability goals to drive long-term value and societal impact.

Rebar cages form the skeletal framework of reinforced concrete structural members. They comprise longitudinal and transverse reinforcing bars, usually connected by tie wires. Past studies have identified tie-wire connections as the "weak links" in large, prefabricated rebar cages, leading to their failure during site handling and construction stages. Recent research has explored the use of mechanical U-bolt connectors to bolster stability and safety of rebar cages while reducing their vulnerability and risk of failure. This paper presents a comprehensive experimental and numerical investigation of a new type of mechanical connector, referred to as "Cage Clamp", to enhance rebar cage stability and safety. Component-level experimental tests are conducted to determine the force-displacement response of Cage Clamp connectors for crossbar connections in different degrees of freedom. The results highlight the remarkable strength and stiffness of Cage Clamp connectors, significantly outperforming traditional tie-wire connections. Furthermore, full-scale experimental tests are performed on a circular underground pile-shaft rebar cage with Cage Clamp connectors to assess its behavior under various site handling conditions. The data obtained from these experiments are used to construct and refine detailed 3D finite element models of the rebar cages, capable of capturing the complex behavior of rebar cages with Cage Clamp connectors. Using the numerical model, a sensitivity analysis is performed to assess the effect of the number of Cage Clamps on the deflection and stability of the rebar cage. The findings show that using cage clamps to connect pick-up rebar with lateral reinforcement at every 8 to 10 feet is sufficient to ensure the stability of the cage during typical site handling conditions. The results of this study serve as a basis for establishing analysis, design, fabrication, and handling guidelines for rebar cages, contributing to safe and efficient construction practices.

Accurate localization of the fovea in fundus images is essential for diagnosing retinal diseases. Existing methods often require extensive data and complex processes to achieve high accuracy, posing challenges for practical implementation. In this paper, we propose an effective and efficient approach for fovea detection using simple image processing operations and a geometric approach based on the optical disc's position. A key contribution of this study is the successful determination of the temporal direction by leveraging readable asymmetries related to the optical disc and its surroundings. We discuss three methods based on asymmetry conditions, including blood vessel distribution, cup disc inclination, and optic disc location ratio, for detecting the temporal direction. This enables precise determination of the optimal foveal region of interest (ROI). Through this optimized fovea region, fovea detection is achieved using straightforward morphological and image processing operations. Extensive testing on popular datasets (DRIVE, DiaretDB1, and Messidor) demonstrates outstanding accuracy of 99.04% and a rapid execution time of 0.251 seconds per image. The utilization of asymmetrical conditions for temporal direction detection provides a significant advantage, offering high accuracy and efficiency while competing with existing methods.

Abstract: Hyperglycemia caused cardiac cell damage by increasing ROS production in diabetic complications. The current study will prove the antioxidant activity of Swietenia macrophylla (S. macrophylla) extract nanoparticles as a protector against Streptozotocin (STZ)-induced cardiac cell damage. In this research, high-energy ball milling is used to make S. macrophylla extract nanoparticle. Furthermore, characterize the size of S. macrophylla extract nanoparticles with Dynamic Light Scattering (DLS). Forty male rats were divided randomly into five groups. Control group: rats received orally aqua dest; Diabetic group: rats were injected STZ intraperitoneally; S. macrophylla group: rats were injected STZ and given orally with S. macrophylla extract nanoparticles. The DLS showed that the S. macrophylla extract nanoparticles size was 91.50 ± 23.06 nm. Injected with STZ significantly increased cardiac tissue of MDA levels, serum of CK-MB and LDH levels. STZ also significantly reduced expression of Nrf2, level of SOD and GPx in cardiac tissue compared with control group (p<0.05). In contrast, administration of S. macrophylla extract nanoparticles can prevent STZ-induced cardiac cell damage by decreasing level of CK-MB and LDH in serum, and level of MDA in cardiac tissue. S. macrophylla extract nanoparticles also significantly increments Nrf2 expression, SOD and GPx levels in cardiac tissue. These effects are related to the prevention of cardiac histopathological alteration (degeneration and necrosis) in diabetic rats. These results suggest that S. macrophylla nanoparticles might be a potential cardioprotective agent against STZ-induced cardiac cell damage due to its antioxidant properties

Healthcare workers' stress, burnout, and job dissatisfaction were exacerbated by the Covid-19 pandemic, whose mid-term negative effects are still present. The aim of this study was to investigate in healthcare workers the effect of the dimensions of burnout (Psychophysical exhaustion, Relational deterioration, and Professional inefficacy) on Career satisfaction. These relationships were evaluated by considering the direct and mediated effects of Disillusion. For these purposes, the Link Burnout Questionnaire (LBQ) and the Career Satisfaction Scale (Occupational Stress Indicator - OSI) were administered to 295 healthcare professionals working at three Italian public hospitals in Cagliari, Italy. The analyses were conducted using the Partial Least Square Structural Equation Model (PLS-SEM) method. Findings highlight that healthcare workers were in a condition of work distress, high risk of burnout, and career dissatisfaction. Also recognized was the direct negative effect of burnout dimensions on career satisfaction. Finally, the mediated negative effect of Disillusion in the relationship between burnout and career satisfaction was identified. This study emphasizes the relevance of the dimension of Disillusion, and its “bright side” Fulfilment, in healthcare workers, specifically referring to the disregarded relationship between burnout and career satisfaction.

Single-molecule magnets (SMMs) have garnered significant interest in the field of molecular magnetism due to their unique magnetic properties at the nanoscale. These molecular systems exhibit magnetisation behaviour reminiscent of conventional bulk magnets but with distinct advantages such as size-dependent properties and potential applications in quantum computing and high-density data storage. However, challenges remain in harnessing their properties for practical applications, including their susceptibility to degradation and limited control over their assembly and organisation.

Due to its built-up chemoresistance after prolonged usage, the demand for replacing platinum in metal-based drugs (MBD) is rising. The first MBD approved by the FDA for cancer therapy was cisplatin in 1978. Even after nearly four and a half decades of trials, there has been no significant improvement in osteosarcoma (OS) therapy. In fact, many MBD have been developed, but the chemoresistance problem raised by platinum remains unresolved. This motivates us to elucidate the possibilities of the copper and zinc (CuZn) combination to replace platinum in MBD. Thus, the anti-chemoresistance properties of CuZn and their physiological functions for OS therapy are highlighted. Herein, we summarise their chelators, main organic solvents, and ligand functions in their structures that are involved in anti-chemoresistance properties. Through this review, it is rational to discuss their ligands’ roles as biosensors in drug delivery systems. Hereafter, an in-depth understanding of their redox and photoactive function relationships is provided. The disadvantage is that the other functions of biosensors cannot be elaborated on here. As a result, this review is being developed, which is expected to intensify OS drugs with higher cure rates. Nonetheless, this advancement intends to solve the major chemoresistance obstacle towards clinical efficacy.

The study titled "Molecular Choreography of DNA: Insights and Innovations" explores the intricate dance of DNA, shedding light on its structure, function, and regulation. This comprehensive review delves into the historical significance of DNA research, from Watson and Crick's double helix discovery to recent innovations in genomics and molecular biology. The review highlights DNA's roles in replication, repair, gene regulation, and chromatin dynamics, emphasizing the precision and complexity of its molecular choreography. Innovations like CRISPR-Cas9 gene editing and advanced sequencing technologies have revolutionized our understanding of DNA, opening new avenues for scientific exploration. This study aims to provide readers with a deeper appreciation of DNA's central role in life's choreographed processes.

Vaccination has been one of the most successful and the most significant scientific advances in human health and life expectancy all around the globe. The World Health Organization considers that immunization should be recognized as the main component of human health right, due to the fact that vaccination prevents 2.5 million deaths annually (World Health Organization, 2011). The most successful vaccines have been developed using conventional methods that follow the paradigm established by Pasteur: "to isolate, inactivate and inject" the pathogen microorganism and mimic a natural infection. Recently, metagenomics have played an important role in the discovery of new immunogens for vaccine design and the selection of antigens based on genomic information. The main approach that has used this strategy has been called "reverse vaccinology". This promising and arising field allows the screening of the entire potential antigenic repertoire of an organism using predictive bioinformatic tools. Once the antigenic protein or proteins have been selected, they are expressed and purified using molecular cloning and in vitro expression techniques. Following the in vitro production step, they are probed in animal models to evaluate the in vivo protective strength of the immune response. The main aim of this in vivo approach is to evaluate the ability of the immune response to eliminate or neutralize the pathogen at the time of infection. Those antigens capable of generate a specific immune response with neutralizing activity for natural infections are the best candidate vaccines. In this review we summarize the evolution of vaccinology since its inception, with special emphasis on the development of VLPs as vaccine platforms and their future in preventive medicine and we introduce a new recombinant platform for antigen presentation based on Junin virus VLPs (JUNV-VLPs).

Text annotation is an essential element of the natural language processing approaches. The manual annotation process performed by humans has several drawbacks, such as subjectivity, slowness, fatigue, and possibly carelessness. In addition, annotators may annotate ambiguous data. So, we developed the concept of automated annotation to get the best annotations using several machine-learning approaches. The proposed approach is based on an ensemble algorithm of meta-learners and meta-vectorizer techniques. The approach employs a semi-supervised learning technique for automated annotation, aimed at detecting hate speech. This involves leveraging various machine learning algorithms, including Support Vector Machine (SVM), Decision Tree (DT), K-Nearest Neighbors (KNN), and Naive Bayes (NB), in conjunction with Word2Vec and TF-IDF text extraction methods. The annotation process is performed using 13,169 Indonesian YouTube comments data. The proposed model used a Stemming approach using data from Sastrawi and also new data of 2,245 words. Semi-supervised learning uses 5%, 10%, and 20% of labeled data as compared to performing labeling based on 80% of the datasets. In semi-supervised learning, the model learns from the labeled data, which provides explicit information, and the unlabeled data, which offers implicit insights. This hybrid approach enables the model to generalize and make informed predictions even when limited labeled data is available, ultimately enhancing its ability to handle real-world scenarios with scarce annotated information. In addition, the proposed method uses a variety of thresholds for matching words labeled with hate speech ranging from 0.6, 0.7, 0.8, and 0.9. The experiment showed that the KNN-Word2ec model has the best accuracy value of 96.9% with a scenario of 5%:80%:0.9. However, several other methods have also accuracy above 90%, such as SVM and DT based on both text extraction methods in several test scenarios.

There has been no significant efficacy in treatment for osteosarcoma (OS) metastasis after nearly four decades of trials. This motivates us to elucidate OS therapies according to their four bidirectional mutation stages. To refresh the OS therapy status quo, the historical developments and clinical advancements are briefly described. However, the main issue of metastasis remains unresolved, accounting for 90% of pulmonary metastasis deaths. Thus, this metastasis problem is related to immune evasion and chemoresistance that are being induced after long-term treatment by the use of immunotherapy for tumorigenesis. Therefore, it is rationale to discuss the relationship cycles of mutation stages including tumorigenesis, metastasis, immune evasion, and chemoresistance. Even though many combinational and targeted therapies have been developed to intensify these mutation treatments, successful clinical translations with higher cure rates are still rare. Through this review, an in-depth understanding of the bidirectional relationship between the four OS mutation stages and their respective therapies is provided. Herein, we summarise the medicines used to treat tumorigenesis, including COLGALT2 inhibitors, Tra2B, and AGAP1, miR-148a and miR-21-5p EVs, and the lncRNA LIFR-AS1. Following the medicines used to treat metastasis are AXL, miR-135a-5p, mRNA BCL6, TGFβ1, Tim-3, SOCS5, CASC15, KLF3-AS1, PDCD4, ATG5, and Rab22a-NeoF1. Then the medicines used to treat immune evasion are N-cadherin, anti-IL-9, USP12 inhibitor, IgG-4+ B-cells, LAP inhibitor, anti-Wnt2 mAb, anti-αvβ8 integrin, HK2-mediated IκBα, IDO inhibitor with NO, and TGF-βRII with anti-IgG1. Finally, the medicines used to treat chemoresistance are DHFR, FPGS, HSP-90AA1, XCT-790, ATKI, and IGF1. As a result, this contribution is expected to serve as a reference and guide for scientists and clinicians.

This article will briefly review the progress of h-BN based solid-state metal semiconductor metal (MSM) neutron detectors. In the last decade, several groups have been working on hexagonal boron nitride (h-BN) based solid-state neutron detectors. Recently, the detection efficiency of 59% has been reported. Efficient, low-cost neutron detectors made from readily available materials are essential for various applications. Neutron detectors are widely used to detect fissile materials and nuclear power plants for security applications. The most common and widely used neutron detectors are 3He based, which are sometimes bulky, difficult to transport, have high absorption length, need relatively high bias voltage (>1000 V), and have low Q-value (0.764 MeV). Also, 3He is not readily available material. Thus, there is a strong need to find an alternative detection material. 10B isotope has a high neutron absorption cross-section, and it has been tested as a coating on the semiconducting materials. Due to the two-step process, neutron capture through 10B, and then electron-hole pair generation in a typical semiconducting material, the efficiency of these devices is not up to the mark. The progress in h-BN based detectors requires a review to envision the further improvement in this technology.

This paper evaluates the global sustainable competitiveness of three blocks of power (US, China and EU) based on OGT (Organic Growth Theory) structure. In addition, a sensitivity analysis of COVID-19 on three measures of global sustainable competitiveness, economy, environment and social is also presented. OGT is a well-thought-through and standard framework for evaluation of any type of organiza-tion in their pathway to experience truly sustainable growth. GDP (Gross Domestic Product) is used as an economic measure; total carbon emissions equivalent is used as an environmental measure and HMI (Human Development Index) as a social measure. It is concluded that the pandemic has paused the evolution of countries to be truly world centric countries. However, the recovery plans seem to be highly aligned with the OGT scores and it is expected that the scores to improve dramatically.

Innovation and technology are important tools of minerals sector efficiency and productivity im-provement. The uptake of technologies has proven important levelrs to improve the productivity of mining sector. This paper provides a comprehensive analysis of mine-level productivity by using a global data of copper, gold, and platinum from 1991-2020. Various drivers of proioductivity have been analysed to draw policy insights. Empirical findings reveal significant disparities in technical efficiency and productivity across mines and regions. A further decomposition of TFP into its different components suggest that the adoption of innovative practices and investment in technology adoption could improve the overall productivity of these commodities. The findings also suggest that an appropriate input mix and optimal scale of production could boost platinum mining productivity. Regional disparities in productivity in different commodities (e.g., South Africa vs. Zimbabwe) give policymakers with insights into how to support production scale and productivity through appropriate input mixtures.

The research aims to improve some of the physical and hydro-physical properties of some Vertisols in the southern region (part of the eastern Houran Plateau) in Sweda Governorate at the south of Syria. Using different quantities of volcanic ash, soil samples were collected from the Al-Thahallah village from a depth of (0-30) cm, The experiment was designed according to the complete random design with one factor that represents the ash quantity (1.25, 2.5, 5) %, with three replicates for each treatment in addition to the control treatment a0. The experiment was carried out within the plastic pots during agricultural season 2018/2019, in which the wheat of the Sham variety 3 were cultivated as a cover plant. The results showed that the addition of volcanic ash at the quantity of 5% led to a significant increase in the infiltration rate by (328.60) %,%, where the filtration rate increased from 0.42 cm/hr -1 to 1.80 cm.h-1, as well as for each of the air porosity by (89) % and the volume of infiltrate water by (40) %, compared with the control. The above-mentioned addition also resulted in a decrease in both dry bulk density, total soil porosity and volumetric swelling coefficient by (18.60, 5.80, 314) % Respectively, compared to the control. The addition also contributed to the reduce in the weighted moisture content when saturation and the field capacity, at the level of significance of 5%. The research recommends adding volcanic ash to the soil at a quantity of 5%, and adding enhancements with volcanic ash at various levels such as organic waste.

Machine Learning (ML) has brought about a transformative era in reactor operations, reshaping monitoring, control, and optimization strategies. This survey comprehensively explores the diverse spectrum of ML applications in industrial reactors. From real-time sensor analysis ensuring reactor functionality to adaptive control algorithms ensuring stability, ML's impact is profound and multifaceted. The benefits of ML are equally evident in optimization, encompassing performance trend prediction, proactive maintenance, and fine-tuning of operations for enhanced efficiency. This review identifies dominant ML techniques, operations stages receptive to ML integration, core data sources, and critical input-output parameters. Aimed at both academics and practitioners, this exploration enriches reactor technologies, unlocking their full potential through insights driven by ML.

The outbreak of coronavirus 2 (SARS-CoV-2) has already taken on pandemic proportions and has affected more than 100 countries in recent weeks. It is imperative that global healthcare systems are prepared. Containment initiatives in Jordan, on the other hand, have decreased new cases by over 63%. The Jordanian national health system has been very pleased with its ability to adequately meet the needs of the patients diagnosed with SARS-CoV-2 pneumonia, and includes intensive care. From 2 March to 14 April 2020, between 4% and 8% of active infected patients in Jordan registered daily in intensive care. The percentage is very low.

Nanofibres have gained increasing attention due to their advantages of having a high porous structure, narrow pore size and distribution, and a high specific surface area. One of the most efficient techniques for producing nanofibres is via electrospinning. Nanofibres are currently being used in various fields, including water filtration. Although nanofibres possess the ability to filter various components, the fibres generally have a low mechanical strength that can mitigate the performance over time. Therefore, in overcoming this issue, several studies have focused on improving the strength of the nanofibre membranes for a water filtration application. This review discusses the advantages and challenges of nanofibres for water filtration membranes and summarises the methods to increase the strength of the membranes, including solvent vapour, thermal treatment, and chemical crosslinking.

The epigenetic mechanism of DNA methylation is essential for regulating gene expression and adaptation in plants, especially when exposed to various environmental stressors such as drought, heat, and nutrient availability. The impact of these stressors can lead to alterations in DNA methylation patterns and gene expression, which this study aims to investigate. Specifically, we are interested in understanding how DNA methylation plays a role in controlling the expression of stress-response genes, as well as genes involved in plant growth and development. To accomplish this, we are analyzing the changes in DNA methylation patterns and gene expression in response to different stressors like drought and heat. Our research findings suggest that DNA methylation is a vital regulator of plant adaptation to environmental stress, and we hope to gain further insight into these mechanisms by identifying genes that exhibit differential expression in response to stress and analyzing their DNA methylation status. This study offers valuable insights into the development of crops that can thrive under changing climate conditions.

Knowledge on the health of banana trees is critical for farmers to profit from banana cultivation. Fusarium wilt and banana blood diseases (BDB), two significant diseases infecting banana trees, are caused by Fusarium oxysporum and Ralstonia syzygii, respectively. They have successfully caused a decline in crop yield as they destroy the trees, starting sequentially from the pseudostem to the fruits. The entire distribution of BDB and Fusarium on a plantation can be understood using advanced geospatial information obtained from multispectral aerial photographs taken using an unmanned aerial vehicle (UAV), combined with the reliable data field of infected trees. Vegetation and soil indices derived from a multispectral aerial photograph, such as normalized difference vegetation index, modified chlorophyll absorption ratio index, normalized difference water index (NDWI) and soil pH, may have to be relied on to explain the precise location of these two diseases. In this study, a random forest algorithm was used to handle a large dataset consisting of two models: the banana diseases multispectral model and the banana diseases spectral model. The results show that the soil indices, soil pH and NDWI are the most important variables for predicting the spatial distribution of these two diseases. Simultaneously, the plantation area affected by BDB is more extensive than that affected by Fusarium, if the variation of planted banana cultivars is not considered.

Current research in the field of antimicrobials is focused on the development of novel antibiotics and antimicrobial agents to counteract the huge dilemma that the human population is mainly facing in regards to the rise of bacterial resistance and biofilm infections. Host Defense peptides (HDPs) are a promising group of molecules for antimicrobial development as they share unique characteristics suitable for antimicrobial activity including their broad spectrum of activity and potency against bacteria. AamAP1 is a novel HDP that was identified through molecular cloning from the venom of the North African scorpion Androctonus amoeruxi. In vitro antimicrobial assays revealed that the peptide displays moderate activity against different strains of Gram-positive and Gram-negative bacteria. Additionally, the peptide proved to be highly hemolytic and displaying significantly high toxicity against mammalian cells. In our study, a novel synthetic peptide analogue named A3 was designed from the naturally occurring scorpion venom host defense peptide. The design strategy depended on modifying the amino acid sequence of the parent peptide in order to increase its net positive charge, percentage helicity and optimize other physico-chemical parameters involved theoretically in HDPs activity. Accordingly, A3 was evaluated for its in vitro antimicrobial and anti-biofilm activity individually and in combination with four different types of conventional antibiotics against clinical isolates of multi-drug resistant (MDR) Gram-positive bacteria. A3 was also evaluated for its cytotoxicity against mammalian cells. A3 displayed potent and selective in vitro antimicrobial activities against a wide range of MDR Gram-positive bacteria. Our results also showed that combining A3 with conventional antibiotics displayed a synergistic mode of action which resulted in decreasing the MIC value for A3 peptide as low as 0.125 µM. These effective concentrations were associated with negligible toxicities on mammalian cells. In conclusion, A3 exhibits enhanced activity and selectivity when compared with the parent natural scorpion venom peptide. The combination of A3 with conventional antibiotics may be pursued as a potential novel treatment strategy against MDR and biofilm forming bacteria.

This paper investigates an innovative photovoltaic cell configuration, denoted as “Au/CuSCN/RbGeI3/CdTe/ZnO/TiO2/FTO", using SCAPS-1D simulation. The research focuses on optimizing device performance by analyzing key components, including ZnO as the electron transport layer (ETL), RbGeI3 as the perovskite absorber layer, CuSCN as the hole transport layer (HTL), and CdTe as the active buffer layer. A comparison is made with the standard “Au/CuSCN/CH3NH3SnI3/CdTe/ZnO/TiO2/FTO" configuration under dark and illuminated conditions. Through an in-depth investigation involving temperature effects, generation rate analysis, RbGeI3 absorber layer thickness, Nd level, and interface defect levels, an optimized design for a unit area is achieved. The proposed solar cell demonstrates outstanding performance metrics, including an open circuit voltage (Voc) of 0.94V, a short circuit current density (Jsc) of 34.52mA/cm2, a fill factor (FF) of 77.77%, and an energy conversion efficiency (η) of 25.40%. These values significantly outperform the reference models with energy conversion efficiencies of 10.11% and 21.09%. Real-world applicability is validated by implementing these optimized characteristics in a photovoltaic system for Pakistan’s geographical location using PVSyst software. The suggested solar cell achieves a remarkable performance ratio (PR) of 85.6%, surpassing the PR of the reference basic solar cell model at 83%. The findings of this research offer a promising and superior solar cell design, incorporating innovative materials and optimization techniques to achieve exceptional energy conversion efficiency and overall performance. This study’s outcomes have the potential to advance photovoltaic technology and contribute to sustainable energy solutions worldwide.

Sorghum has become increasingly popular for diverse applications, including food, feed, and bioenergy. The present study aimed to perform a bibliometric and content analysis on sorghum research in the industrial-agricultural sector to evaluate global research patterns, emerging topics, and future trends. The bibliometric analysis of the Scopus bibliographic metadata was done using Bibliometrix and Vosviewer. The results of this investigation show the descriptive analysis underscored fluctuation in research output and citation impact over the years. The identified four patterns through co-occurrence analysis encompassed central themes of sorghum research, including genetic expression and plant stress cluster, cereal crop and yield cluster, biomass and microbial bioprocessing, and metabolism and antioxidant cluster. The thematic map portrays a comprehensive view of cereal crops and yields, biomass and microbial bioprocessing, metabolism and antioxidant research, environmental remediation and sustainable agriculture practices, and the declining theme of starch. The findings provide valuable insights into the global pattern of sorghum research and emerging trends, thus directing future multidisciplinary research efforts for enhanced knowledge and sustainable practices in the industrial-agricultural sector.

Ipomoea batatas L. (IBL) has gained significant popularity as a complementary therapy or herbal medicine in the treatment of anti-diabetes. The objective of this review is to examine the mechanism of action of flavonoid compounds found in IBL that can activate GLP-1 as an anti-diabetic agent. The review article refers to PRISMA guidelines. The literature search was conducted using electronic databases such as Crossref, Pubmed, Scopus, and Science Direct. The search query was based on specific keywords, including Ipomoea batatas OR sweet potato AND anti-diabetic OR hypoglycemic. A total of 1055 articles were found, but only 32 articles were selected for further review based on inclusion and exclusion criteria. IBL contains various compounds, including phenolic acid, flavonols, flavanols, flavones, and anthocyanins, which exhibit activity against anti-diabetes. Flavonols, flavonols, and flavones belong to a group of flavonoids that possess the ability to form complexes with AlCl3 and Ca2+. Retention of Ca2+ within intracellular L cells, resulting in the release of GLP-1. Flavonols, flavones, and flavone groups have been found to strongly interact with DPP-IV, which inhibits the degradation of GLP-1. This mechanism effectively prolongs the half-life of GLP-1 in the systemic system, thereby contributing to the anti-diabetic activity of IBL

This study examines the moderating effect of trained human capital on the associations of accounting information systems, generalized auditing software, and technology adoption with the performance of external auditors among Saudi listed companies. This study used a survey-based methodology. The final sample consisted of 136 responses with an 8% response rate. Using Smart-PL4 analysis, the results showed that there is a positive correlation between accounting information systems and external auditors. Conversely, a negative relationship between generalized auditing software and external auditors has been documented. In addition, this study reported a negative association between technology adoption and external auditors. However, the results highlight the positive relationship between trained human capital and external auditors. Overall, this study provides valuable insights for accounting and auditing policymakers on how external auditors’ performance is influenced by several factors in the Saudi audit market.

Lifestyle physical activity (PA) and nutrition are known to be effective interventions in preventing and managing obesity related comorbidities is adult populations, but less so in children and adolescents. We examined the effectiveness of lifestyle interventions in children from minority ethnic populations in western high-income countries. Our systematic review included 53 studies involving 26045 children from minority ethnic populations within western countries, who followed lifestyle intervention programs lasting between 8 weeks and 5 years with an aim to prevent and/or manage childhood obesity and associated comorbidities, including adiposity and cardiometabolic risks. Studies were heterogenous in terms of lifestyle intervention components (nutrition, PA, behavioural counselling) and settings (community vs. schools and after schools). Our meta-analysis included 31 eligible studies and showed no significant effects of lifestyle interventions when they focused on body weight and body mass index (BMI) outcomes [pooled BMI mean change = -0.09 (95% CI -0.19, 0.01), p=0.09]. This was irrespective of the intervention program duration (< 6 months vs. ≥ 6 months), type (PA vs nutrition/combined intervention) and weight status (overweight or obese vs no normal weight), all showed no significant effects in the sensitivity analysis. Nonetheless, 19 of the 53 studies reported reduction in BMI, BMI z scores and body fat percentage. However, majority of lifestyle interventions adopting a quasi-design with a combined primary and secondary obesity measures (11 out of 15 studies), were effective in reducing obesity comorbidities of cardiometabolic risks including metabolic syndrome, insulin sensitivity, and blood pressure in children with overweight and obesity. Preventing childhood obesity and associated comorbidities in children from high-risk ethnic minority groups is best achieved using a combined PA and nutrition intervention approach, which jointly target preventing obesity and cardiometabolic disease primary and secondary outcomes, especially measures of diabetes, hypertension, and cardiovascular disease.

Nowadays, brain signal processing is performed rapidly in various brain-computer interface (BCI) applications. Most researchers focus on developing new methods for the future or improving the basic implemented models to identify the optimum standalone feature set. Our research focuses on four ideas. One of them introduces future communication models, and the others are for improving old models or methods. These are: 1) new communication imagery model instead of speech imager using the mental task: Due to speech imagery is very difficult, and it is impossible to imagine sound for all of the characters in all of the languages. Our research introduces a new mental task model for all languages that call Lip-sync imagery. This model can use for all characters in all languages. This paper implemented two lip-sync for two sounds, characters or letters. 2) New combination Signals: Selecting an inopportune frequency domain can lead to inefficient feature extraction. Therefore, domain selection is so important for processing. This combination of limited frequency ranges proposes a preliminary for creating Fragmentary Continuous frequency. For the first model, two s intervals of 4 Hz as filter banks were examined and tested. The primary purpose is to identify the combination of filter banks with 4Hz (scale of each filter bank) from the 4Hz to 40Hz frequency domain as new combination signals (8Hz) to obtain well and efficient features using increasing distinctive patterns and decreasing similar patterns of brain activities.3) new supplement bond graph classifier for SVM classifier: When SVM linear uses in very noisy, the performance is decreased. But we introduce a new bond graph linear classifier to supplement SVM linear in noisy data. 4) a deep formula recognition model: it converts the data of the first layer into a formula model (formula extraction model). The main goal is to reduce the noise in the subsequent layers for the coefficients of the formulas. The output of the last layer is the coefficients selected by different functions in different layers. Finally, the classifier extracts the root interval of the formulas, and the diagnosis does based on the root interval. For all of the ideas achieved the results of implementing methods. The results are between 55% to 98%. Less result is 55% for the deep detection formula, and the highest result is 98% for new combination signals.

This paper addresses the conceptual exploration of various issues that form an integral part of the ethical dimensions surrounding the use of artificial intelligence (AI) in the field of marketing. We critically review some of the main ethical challenges AI poses to humanity: privacy, data security, bias, transparency, and accountability. Therefore, we will discuss the delicate balance between exploiting the transformation potential of AI for personally designed marketing strategies and ethical imperatives to safeguard the rights of consumers to retain trust. Then, the present regulatory landscape responding to these ethical challenges will be assessed by building on effective regulation, like the GDPR, existing proposed legislative frameworks, and industry guidelines. To underscore the role of an ongoing dialogue between marketers, technologists, ethicists, and regulators for developing a responsible AI ecosystem in marketing. Further, strategic recommendations for implementing company-based ethical AI marketing practices. The further strong guidelines provide enhancement transparency to consumers and investment in research to remove biases from algorithms. It also underscores principal scopes of further research and development, focusing on the need for new-age solutions to guide the ethical quagmires that AI-led marketing throws up. We suggest that integration should be done proactively and collaboratively. Thus, if attention is paid more to ethics and multidisciplinary dialogue, only such hyperbolic promises can be realized by AI-driven marketing. There are such promises through which AI-driven marketing will meet business goals and be huge at societies' values.

The concerning rise in emergence and prevalence of resistant strains to drugs of M. tuberculosis has ,the prompted researchers to look for new and effective treatments. With this motive, biscoumarins were identified as the lead molecules on a whole-cell-based screening of several less explored low molecular weight bioactive compounds against M. tuberculosis strains. Among the screened biscoumarins, the highest dock score derivatives were synthesized (a-h) using a programmable microwave synthesizer for better yields and reaction control. The synthesized derivatives were evaluated against H37Rv, H37Ra, M. smegmatis, an MDR surrogate model, and other bacterial strains for the structure-activity response. Assessment of the synthesized library against mycobacterial strains led to the identification of compounds (f and d) as lead anti-tuberculosis agents. Compounds (f and d) exhibited less toxicity against human cell lines. At the same time, it displayed enjoyable activity wherein MIC concentrations were observed to be 16- and 32 µg/mL against the susceptible H37Rv, and H37Ra strains of M. tuberculosis and MIC value of 128 µg/mL for M. smegmatis, respectively. For mechanistic insights and identification of drug binding targets, molecular docking and dynamic simulations were employed for a panel of 16 mycobacterial enzymes essential for mycobacterial growth and survival. These in silico studies revealed the DprE1 enzyme as a druggable target for the anti-tuberculosis activity of the selected biscoumarins derivatives. Further investigation is underway in our laboratory, leading to its development as an anti-tuberculosis drug (animal model studies).

In this work, a highly efficient, molybdenum disulfide (MoS2) based near infrared (NIR) heterojunction photodetector is fabricated on a Si substrate using a cost-effective and simple drop casting method. A non-stoichiometric and inhomogeneous MoS2 layer with a S/Mo ratio of 2.02 is detected using energy dispersive X-ray spectroscopy and field emission scanning electron microscope analysis. Raman shifts are noticed at 382.42 cm-1 and 407.97 cm-1, validating MoS2 thin film growth with a direct bandgap of 2.01 eV. The fabricated n-MoS2/p-Si photodetector is illuminated with a 785 nm laser at different intensities, and demonstrate the ability of the photodetector to work in both regions, the forward biased and reverse biased from above 1.5 V and less than -1.0 V. The highest responsivity, R is calculated to be 0.52 A/W while the detectivity D* is 4.08 x 10^10 Jones for an incident light intensity of 9.57 mW/cm2. The minimum rise and fall times are calculated as 1.77 ms and 1.31 ms for an incident laser power of 9.57 mW/cm^2 and 6.99 mW/cm^2 respectively at a direct current bias voltage of 10 V. The demonstrated results are promising for the low-cost fabrication of a thin MoS2 film for photonics and optoelectronic device applications.

Image registration (IR) is a process that deforms images to align them with respect to a reference space, making it easier for medical practitioners to examine various medical images in a standardized reference frame, such as having the same rotation and scale. This document introduces image registration using a simple numeric example. It provides a definition of image registration along with a space-oriented symbolic representation. This review covers various aspects of image transformations, including affine, deformable, invertible, and bidirectional transformations, as well as medical image registration algorithms such as Voxelmorph, Demons, SyN, Iterative Closest Point, and SynthMorph. It also explores atlas-based registration and multistage image registration techniques, including coarse-fine and pyramid approaches. Furthermore, this survey paper discusses medical image registration taxonomies, datasets, evaluation measures, such as correlation-based metrics, segmentation-based metrics, processing time, and model size. It also explores applications in image-guided surgery, motion tracking, and tumor diagnosis. Finally, the document addresses future research directions, including the further development of transformers.

Nowadays, speed up development and use of digital devices such as smartphones have put people at risk of internet crimes. The evidence of present crimes in a computer file can be easily unreachable by changing the prefix of a file or other algorithms. In more complex cases, either file divided into different parts or the parts of a file that has information about the file type are deleted, where the file fragment recognition issue is discussed. The known files are divided into different fragments, and different classification algorithms to solve the problems of file fragment recognition. A confusion matrix measures the accuracy of type recognition. In the present study, first, the file is divided into different fragments. Then, the file fragment features, which are obtained from Binary Frequency Distribution (BFD), are reduced by 2 feature reduction algorithms; Sequential Forward Selection algorithm (SFS) as well as Sequential Floating Forward Selection algorithm (SFFS) to delete sparse features that result in increased accuracy and speed. Finally, the reduced features are given to 3 classifier algorithms, Multilayer Perceptron (MLP), Support Vector Machines (SVM), and K-Nearest Neighbor (KNN) for classification and comparison of the results. In this paper, we proposed the algorithm of file type recognition that can recognize 6 types of useful files ( pdf, txt, jpg, doc, html, exe), which may distinguish a type of file fragments with higher accuracy than the similar works done.

Use of rhizosphere microorganisms provides an alternative or supplement to conventional plant breeding to improve water deficit tolerance of tomato plants. Experiment was carried out to explore the effect of two microbial species, AMF (Rhizophagus irregularis) and Bacillus subtilis, in single and co-application, on growth, colonization, and molecular aspects of tomato plants under drought stress. Co-inoculated plants showed less reduction in growth traits, photosynthetic pigments, colonization rate, and increased compatible solutes like proline which help in sustaining relative water content than non-inoculated plants. Inoculation considerably enhanced proline dehydrogenase activity, and significantly reduced both Δ1-pyrroline-5-carboxylate reductase Δ1-pyrroline-5-carboxylate synthetase activity causing lower proline accumulation in inoculated plants under drought stress. Co-inoculated plants showed obvious upregulation of antioxidant system, thus facilitating amelioration of oxidative stress through exclusion of reactive oxygen species. No inoculation under drought stress upregulated abscisic acid related genes expression but have no effect in plants inoculated either sole or mixed inoculation. Expression of aquaporin genes was upregulated in plants co-inoculated and with AMF alone under normal condition. However the expression of aquaporin genes were decreased or unaffected in plants inoculated with Bacillus subtilis but increased in non-inoculated plants. Co-applied AMF and bacillus subtilis substantially increase drought tolerance by upregulating proline metabolism, antioxidant enzymes and aquaporin genes. Therefore our results suggest that co-inoculation mediated drought tolerance is linked with increased proline accumulation, enhanced antioxidant enzyme activities and differential regulation of ABA biosynthetic and aquaporin genes, which is vital for osmotic adjustment of host plant.

The modulation of Nrf2 activity has been reported to be implicated in the pathology of various neurological disorders, including epilepsy. Previous studies have demonstrated that Nrf2 is activated in the post-status epilepticus rat model, however, the spatio-temporal, as well as cell type-specific expression of Nrf2 following brief epileptic seizures remains unclear. Here, we evaluated how an acute epileptic seizure affected the expression of Nrf2 and its downstream genes in the cortex and the hippocampus up to 1-week following the induced seizure. We found that after a pentylenetetrazol-induced seizure, Nrf2 significantly increased at 24 h at the mRNA level and 3 to 6 h at the protein level in the cortex. In the hippocampus, the Nrf2 mRNA level peaked at 3 h after the seizure, and no significant changes were observed in the protein level. Interestingly, the mRNA level of Nrf2 downstream genes peaked at 3-6 h after seizure in both the cortex and the hippocampus. A significant increase in the expression of Nrf2 was observed in the neuronal population of CA1 and CA3 regions of the hippocampus, as well as in the cortex. Moreover, we observed no change in the co-localization of Nrf2 with astrocytes neither in the cortex nor in CA1 and CA3. Our results revealed that following a brief acute epileptic seizure, the expression of Nrf2 and its downstream genes is transiently increased and peaked at early timepoints after seizure predominantly in the hippocampus, and this expression is restricted to the neuronal population.

Background and Objectives: Optimal learning achievement is often obtained through the consumption of nutritious and balanced food, which prevents poor nutritional statuses, such as severely underweight, underweight, overweight, and obese. This is particularly relevant to Junior High School students aged 11-16 years, who are more prone to malnutrition. Therefore, this study aimed to improve learning achievement through balanced nutrition among Junior High School students. Materials and Methods: The study procedures were carried out using a quantitative approach with a cross-sectional design. The sample population consisted of 350 Junior High School students in Jayapura Municipality, Papua Province, Indonesia. Primary and secondary data were obtained from relevant sources and analyzed using frequency distribution analysis and statistical path analysis tests. Results: The results showed the indirect effect of exogenous variables on the endogenous, where nutritional knowledge and a balanced diet influenced nutritional status (p-value = 0.001), but physical activity had no impact (p-value = 0.167). Meanwhile, the direct effect of exogenous variables on the endogenous showed that nutritional knowledge, interest in learning, and nutritional status influenced students’ achievement (p-value = 0.001). Based on these results, nutritional status played a crucial role in improving the learning achievement of junior high school students.

The Saudi government has undertaken rapid and swift actions, such as suspending Omrah and holding international flights. Such affirmative actions enhanced citizens and residents’ confidence in the government officials’ ability to fight the pandemic. However, there are more than 361,178 reported cases of Covid-19 with 6131 deaths as of December 22, 202. As nurses are the largest component of the health care workforce in Saudi Arabia, it is important that they are trained and have the skills and resources to adapt, whether on the frontline of a crisis or in a clinical environment. Nurses play a key function in fulfilling the needs of medical treatment by being the most important part of the health care delivery system.

The copper deposition on the platinum and palladium nanoelectrode has been studied using cyclic voltammetry. The use of nanoelectrode platinum and palladium are defined in the study of heavy metals. The noble nanoelectrode of metal has a typical silicone processing structure. In comparison to the nanoelectrodes, the geometry of the electrode series is complex and balanced. Nanoelectrodes of platinum are found effective in detecting heavy metal. There was regular analysis of the use of the sensors. The identification constraints down to the ng /L level was accomplished by refined electrode geometry and the stripping procedures. The process was used for the study of water sample determination. Another heavy metal ion attack voltammetric reaction was studied. The SEM picture clearly observed and characterized the nanoparticle electrode by X-ray diffraction and cyclic voltammetry.

Polyaniline or PANI is a conductive polymer (CPs) with flexibility in turning into conducting properties. The drawback is mainly in terms of limited mechanical properties improvement which attracted the interest in fabrication of PANI with other polymeric materials. PANI-PVL composites film was synthesized and fabricated in this work with chronological steps according to the objectives aligned in two different phases. The first phase determines the optimum parameters to synthesize nanosized PANI. The ideal initial molar ratio, r was 1, stirring speed of 600 rpm, purified by filtration, synthesis temperature of 25 oC, washed by dopant acid, acetone and distilled water. The usage of non-ionic surfactant, Triton X-100 (TX100) with 0.1 % concentration favours the formation of smaller particle size of PANI and good dispersibility compared to the usage of anionic sodium dodecyl sulphate (SDS). The synthesis of PANI in nanosized dimension has the potential to be applied for antimicrobial applications such as gloves and antimicrobial coating of frequent contact points in the near future.

The Kashmir valley is prone to flooding due to its peculiar geomorphic setup compounded by the rapid anthropogenic land system changes and climate change. The study assesses the impact of land use and land cover (LULC) changes between 1980 and 2020 and extreme rainfall on peak discharge and sediment yield in the Upper Jhelum Basin (UJB), Kashmir Himalaya, India using KINEROS2 model. Analysis of LULC change revealed a notable shift from natural LULC to more intensive human-modified LULC, including a decrease in vegetative cover, deforestation, urbanization, and improper farming practices. The findings revealed a strong influence of the LULC changes on peak discharge, and sediment yield relative to the 2014 timeframe, which coincided with the catastrophic September 2014 flood event. The model predicted a peak discharge of 115101 cubic feet per second (cfs) and a sediment yield of 56.59 tons/ha during the September 2014 flooding, which is very close to the observed peak discharge of 115218 cfs indicating that the model is reliable for discharge prediction. The model predicted a peak discharge of 98965 cfs and a sediment yield of 49.11 tons/ha in 1980, which increased to 118366 cfs and, 58.92 tons/ha respectively in 2020, showing an increase in basin’s flood risk over time. In the future, it is anticipated that the ongoing LULC changes will make flood vulnerability worse, which could lead to another major flooding in the event of an extreme rainfall as predicted under climate change and, in turn compromise achievement of sustainable development goals (SDG). Therefore, regulating LULC in order to modulate various hydrological and land surface processes would ensure stability of runoff and reduction in sediment yield in the UJB, which is critical for achieving many SDGs.

The four solvent extractives obtained from aerial parts of Leucophyllum frutescens were evaluated for their Total Antioxidant Activity (TAA) by ammonium molybdate method, scavenging potential by 2,2-diphenyl-1-picrylhydrazyl (DPPH) and Trolox-Equivalent Antioxidant Capacity (TEAC) assays, metal-reducing potential by Cupric Reducing Antioxidant Capacity (CUPRAC) and Ferric Reducing Antioxidant Power (FRAP) assays, Total Phenolic Content (TPC), Total Flavonoid Content (TFC) and their biological activities. The study concluded that BULE exhibited total antioxidant activity (226.235±1.222 mg AA.Eq.gm-1 DE±S.D) by molybdate method, CHLE exhibited more scavenging potential (DPPH 209.589±8.500 mg trolox Eq.gm-1 DE±S.D and TEAC 210.166±7.954 mg trolox Eq.gm-1 DE±S.D) and reducing potential (CUPRAC 646.889±16.889 mg trolox Eq.gm-1 DE±S.D & FRAP 472.981±15.625 mg trolox Eq.gm-1 DE±S.D). Phytochemical quantification concluded high TPC by BULE (189.369±1.393 mg GA.Eq.gm-1 DE±S.D) and high TFC by CHLE (232.458±1.589 mg Qu.Eq.gm-1 DE±S.D). Strong inhibition of α-glucosidase and urease enzymes was observed by HELE (IC50 0.3321±0.007 mg.ml-1±SD) and BULE (IC50 4.09±0.357 mg.ml-1±SD) extractives, respectively. The hemolytic effect shown by hexane extract (HELE) was higher with HA50 25.545±0.927 ug.ml-1±SD whereas methanol (MELE), chloroform (CHLE), and butanol (BULE) exhibited hemolytic effects at higher concentration with HA50 400.067±1.364, 321.394±1.332, and 332.957±0.465 µg.ml-1±SD, respectively. GC-MS profiling of HELE of L. frutescens was performed for qualitative analysis. The principal phytochemicals tentatively identified by GC-MS analysis of HELE accounts for fatty acids (60.221%), lignans (17.687%), ketones (3.358%), phenols (2.584%), sesquiterpenes (1.265%), and aldehydes (0.345%).

The objective of this study is to examine different types of bias present in assessment tools and techniques, identify and eliminate any forms of favoritism, and suggest effective approaches for advancing equity and objectivity in assessment procedures. The research utilizes a qualitative methodology, incorporating surveys and focus group discussions with educators and students to collect data. Thematic analysis is a method employed for the purpose of analyzing qualitative data. The results suggest that students hailing from diverse cultural backgrounds perceive partiality in the language and cultural context of evaluations, leading to diminished scores. According to academic professionals, standardized tests are subject to bias, and offering accommodations that cater to linguistic and cultural diversity may improve the academic achievement of students from diverse cultural backgrounds. The findings of this research are of great importance to professionals in the domains of education, policy development, and academia who seek to improve assessment practices and promote equitable educational opportunities for all learners.

In general, remote sensing has proven to be a powerful tool in the overall understanding of natural and anthropogenic phenomena. Satellites have become useful tools for tasks such as characterization, monitoring, and the continuous prospecting of natural resources. This research aims to analyze spatial dynamic and destructive on coral reefs area and correlation between live coral reduction and population on small islands. Landsat MSS, TM, ETM, and OLI-TIRS are used to spatial analyze of coral reef dynamics from 1972 to 2016. The image processing includes gap-filling, atmospheric correction, geometric correction, image composite (true color), water column correction, unsupervised classification, reclassification, accuracy assessment. The statistical analysis identifies the relationship between dynamic population data with a reduction of live coral, namely Principal Component Analysis (PCA) and Multiple Regression Analysis. The effect of the population shows a positive correlation with the reduction in the area of live coral, although it is significant. The fact is the practice of coral destruction on an island; it is usually not only caused or carried out by residents who live on the island but also carried out by other residents of different islands.

We report the synthesis and characterization of Poly Methyl-Meth-Acrylate (PMMA)/Poly vinylalcohol (PVA) polymeric blend doped with different concentrations of Copper oxide (CuO) nanoparticles (NPs). The (PMMA-PVA)/CuO nanocomposite hybrid thin films (wt. % = 0%, 2%, 4%, 8%, and 16%) of CuO NPs are deposited on glass substrates via dip-coating technique. The transmittance (T%), reflectance (R%), the absorption coefficient (α), the optical constants [refractive index (n), extinction coefficient (k)], optical dielectric functions [ɛ',ɛ''] are investigated and interpreted. Tauc, Urbach, Spitzer-Fan, and Drude models are employed to calculate the optical bandgap energy (Eg) and the optoelectronic parameters of the nanocomposite thin films. The refractive index and optical bandgap energy of of (PMMA-PVA) polymeric thin film are found to be (1.5 to 1.85) and 4.101 eV, respectively. Incorporation of specific concentrations of CuO-NPs in (PMMA-PVA) polymeric thin films leads to a noticeable decrease in the optical bandgap energy and to an increase of the refractive index. Moreover, Fourier Transform Infrared Spectroscopy (FTIR) transmittance spectra are measured and analyzed for undoped and doped polymeric thin films to pinpoint the major vibrational modes in the spectral range (500 and 4000 cm-1), as well as, the nature of network bonding in both systems. Thermal stability of thin films is investigated by performing thermogravimetric analysis (TGA). The TGA thermograms confirm that both doped polymeric thin films are thermally stable at temperatures below 110°C which enables them to be attractive for a wide range of optical and optoelectronic applications. Our results indicate that optical, vibrational and thermal properties of both polymeric thin films can be tuned for specific applications by the appropriate corporation of particular concentrations of CuO-NPs.

Clustered regularly interspaced short palindromic repeats or CRISPR, one of the major technological tools from nature's toolbox, has revolutionized the scientific world with its potential use in humans and plants. CRISPR Cas9 was first known as an adaptive immune system of bacteria. It is a system that cleaves foreign DNA. It has been exploited to be used as a genome editing tool for correcting genetic diseases in humans, for plants to create stress-resistant plants, and for a variety of different purposes. This review provides a basic overview of its applications in different areas of biological research. It has immense potential for a variety of researches, but it's still a mystery for science. It feels like scientists just know a tip of an iceberg.

The Coronavirus disease due to SARS-CoV-2 emerged in Wuhan city, China in December 2019 and rapidly spread more than 200 countries as a global health pandemic. There are more 3 million confirmed cases and around 207,000 fatalities. The primary manifestation is respiratory and cardiac but neurological manifestations are being reported in the literature as case reports and case series. The most common reported symptoms to include headache and dizziness followed by encephalopathy and delirium. Among the complications noted are Cerebrovascular accident, Guillian barre syndrome, acute transverse myelitis, and acute encephalitis. The most common peripheral manifestation was hyposmia. It is further noted that sometimes the neurological manifestations can precede the typical features like fever and cough and later on typical manifestations develop in these patients. Hence a high index of suspicion is required for timely diagnosis and isolation of cases to prevent the spread in neurology wards. We present a narrative review of the neurological manifestations and complications of COVID-19. Our aim is to update the neurologists and physicians working with suspected cases of COVID-19 about the possible neurological presentations and the probable neurological complications resulting from this novel virus infection.

Noncoding RNA regions have emerged as pivotal players in the regulation of various cellular processes, and their involvement in HIV/AIDS pathogenesis is an evolving field of research. This review article delves into the intricate interplay between noncoding RNA regions and AIDS, shedding light on the diverse mechanisms by which these RNA molecules influence viral replication, immune responses, and disease progression. The review highlights recent discoveries, potential therapeutic applications, and the challenges ahead, illustrating the promising prospects of noncoding RNA research in the context of HIV/AIDS.

Non-coding RNA regions have long been considered the "dark matter" of the genome, with their significance in gene regulation remaining enigmatic. However, recent advances in genomics and molecular biology have illuminated the pivotal role that non-coding RNA regions play in the fine-tuned orchestration of hemoglobin expression. Hemoglobin, the oxygen-carrying protein vital for life, is tightly regulated, and any disruption in its production can lead to severe medical conditions, such as hemoglobinopathies. This review delves into the intricate world of non-coding RNA regions, exploring how they act as master conductors in controlling hemoglobin gene expression. We will discuss various classes of non-coding RNAs, including long non-coding RNAs, microRNAs, and circular RNAs, and their specific mechanisms in fine-tuning hemoglobin levels. Additionally, we will highlight emerging therapeutic approaches that target non-coding RNA regions to ameliorate hemoglobin-related disorders. Understanding the critical role of non-coding RNA regions in hemoglobin regulation opens new avenues for precision medicine and gene therapies, offering hope for those affected by hemoglobinopathies and related conditions. This comprehensive review sheds light on the significance of these non-coding RNA regions, demonstrating that the "silent" players in the genome are, in fact, the conductors of harmony in the symphony of hemoglobin regulation.

This study explores the potential of Eisenia fetida (Savigny) in vermicompost production within vermipits during winter months in the Rampur region of Uttar Pradesh, India. The vermipits were inoculated with 0.33 kg of E. fetida per pit, against the recommended rate of inoculation for assessment of real-time potential of earthworm on seasonal and regional grounds. The results revealed a significant increase in earthworm population, with three times production (4.1 kg) of the inoculated number (1.0 kg). The productivity dynamics of compost vs E. feida revealed a notable threefold and fourfold effectiveness, respectively. This dual advantage signifies the success of composting process, with the increased worm population indicating enhanced decomposition. The study attributes the combination of regional and edaphic factors viz., sandy loam soil with high humus content and good water passage, facilitating earthworm survival, reproduction and decomposition of agricultural waste. The loose and perforated soil structure allowed easy penetration of earthworms, transforming the soil into fertile compost. The research emphasizes the importance of soil moisture of semi-arid ecosystems thus highlighting the seasonal significance governing earthworm activity. The study provides insights into the mechanical ability of earthworms, its sensitivity to soil compaction and the influence of high hydration of the region. Inoculation during the winter period indicates increased earthworm activity setting the stage for enhanced compost production in the upcoming hot periods of summer months. The findings suggest that optimizing vermicomposting practices with altered feeding stocks, could further improvise compost and earthworm production and productivity in subsequent seasons. The study contributes for sustainable utilization of E. fetida in composting, its regional and seasonal efficacy turns trash to treasure for enhanced agricultural efficacy

The article outlines a creative approach by fusing ideas from fuzzy contractions, graph mappings, and Kannan mappings to create a brand-new notion known as "Kannan-graph-fuzzy contraction." This combination of concepts makes it possible to create a unique framework for resolving real-world issues controlled by nonlinear models. It is anticipated that using Kannan-graph-fuzzy contractions will offer a fresh approach to discussing solution existence in situations where these ideas overlap. This strategy might have a significant impact on a lot of real-world applications, proving how practical multidisciplinary techniques are for tackling issues in the real world originating from technology and engineering. The article includes several illustrated examples based on computer simulations, making the results more explicit.

The eruption of COVID-19 patients in 215 countries worldwide has urged for robust predictive methods that can detect as early as possible the size and duration of the contagious disease and also providing precision predictions. In much recent literature reported on COVID-19, one or more essential parts of such investigation were missed. One of the crucial elements for any predictive method is that such methods should fit simultaneously as much data as possible; these data could be total infected cases, daily hospitalized cases, cumulative recovered cases, and deceased cases, and so on. Other crucial elements include sensitivity and precision of such predictive methods on the amount of data as the contagious disease evolved day by day. To show the importance of these aspects, we have evaluated the standard SIRD model and a newly introduced Gaussian-SIRD model on the development of COVID-19 in Kuwait. It is observed that the SIRD model quickly picks up the main trends of COVID-19 development, but the Gaussian-SIRD model provides precise prediction a longer period of time.

One of the special trends in health care is the increasing availability of data and services to the cloud, especially for convenience (for example, providing a complete patient medical record without interruption) and savings (for example, economic issues). Management of health care data). However, there are limitations to using common cryptographic prototypes and access control models to address security and privacy concerns in an increasingly cloudy environment. In this paper, we explore the potential and capacity of using China's Blockchain technology to protect health care data hosted in the cloud. We also explain the real challenges of such an approach and further research is needed. Health care is a highly data-dependent domain, with large amounts of data being created, published, stored and accessed daily. For example, data are created when a patient undergoes a number of examinations (such as computed tomography or computed tomography scans) and the data need to be sent to the radiologist and then to a physician. The visit results are then stored in the hospital, and then need to be accessed later by another physician at another hospital within the network. It is clear that technology can play an important role in improving the quality of care for patients (for example, using data analytics to make informed medical decisions) and potentially costing more by allocating resources more efficiently in terms of personnel, equipment, etc. , Reduce. For example, paper-based data extraction is difficult to extract into systems (for example, it is costly and may involve data entry errors), archiving them and accessing them as needed is costly. These challenges may cause medical decisions to be incomplete, requiring repeated tests for missing information or missing data stored in another hospital in another state or country (at the expense of increased costs and no convenience). (For patients) and so on. Because of the nature of the industry, it is important to ensure the security, privacy and integrity of health care data. As a result, there is definitely a need for a secure and secure data management system.

This study aimed to determine the correlation of colour M-mode velocity propagation in the assessment of left ventricular diastolic function among acute decompensated heart failure patients with preserved ejection fraction (HFpEF). This research is an observational analytical study using a cross–sectional study design conducted from April to June 2022. The subjects of this study were patients diagnosed with acute HFpEF and treated at Dr. Soetomo General Academic Hospital, Surabaya. Patients with heart rhythm disturbances, moderate to severe valvular heart disease, and congenital heart defects were excluded from this study. Patients were measured for diastolic function including mitral valve early mitral inflow velocity (MV E Velocity), mitral peak velocity of early filling (E’) (E' Septal and E' Lateral), left atrial volume index (LAVI), The maximal tricuspid regurgitation velocity (TR V Max), Vp, the ratio of early diastolic mitral inflow velocity to early diastolic mitral annulus velocity (E/E'), the ratio between early and late ventricular filling velocity (E/A) and E/Vp Ratio. N-terminal-pro hormone B-type natriuretic peptide (NT–ProBNP) examination was also performed on study subjects as an additional diagnosis of acute heart failure. There were 33 patients who met the inclusion and exclusion criteria and were included in our study. There were 26 patients (78.8%) with grade I diastolic dysfunction, 4 patients (12.1%) with grade II diastolic dysfunction, and 3 patients (9.1%) with grade III diastolic dysfunction. There is a strong positive correlation between Vp with parameters E' Septal (p = &lt; 0.001; r = 0.636) and E' Lateral (p = &lt; 0.001; r = 0.650). Vp is negatively correlated with the ratio E/E' (p = 0.029; r = –0.37). The PCWP estimate with E/Vp ratio had a strong correlation with the NT–Pro BNP value &gt; 300 pg/ml in acute HFpEF patients (p = &lt; 0.001; r = 0.726) compared to the PCWP estimate with E/E' (p = &lt; 0.001; r = 0.549). There is no correlation between Vp value and degree of diastolic dysfunction in patients with acute HFpEF.

This study was to designed to develop sorafenib-loaded polymeric nanoparticles, surface-modified with pluronic F-127 for the effective treatment of hepatocellular (HCC) and renal cell carcinomas (RCC). Poly lactic coglycolic acid (PLGA) was used to encapsulate different concentrations of sorafenib by a simple modified solvent evaporation method applying pluronic F-127 as a surfactant and coating agent. The preformulation and characterization studies were conducted to evaluate the incompatibilities among sorafenib, PLGA and pluronic F-127, and physicochemical properties of the formulations, respectively. The sizes of the coated and plain PLGA nanoparticles were ~140 ± 14.7 nm and ~ 120 ± 10.1 nm, respectively. It has been confirmed from the in vitro release studies that PLGA sustained the release of sorafenib, avoiding the initial burst release, while the in vivo studies demonstared that surface-modified nanoparticles have greater affinity in the target aorgans than plain PLGA nanoparticles and free drug keeping the dose constant (20 mg/kg body weight). The delivery of sorafenib-loaded polymeric PLGA nanoparticles into the target tissues and their pharmacokinetic parameters have been improved significantly compared to the reported formulations.

To handle the huge amount of data generated by IoT devices, Big Data processing tools make it easier. This paper discusses the Big Data concept and its main V’s characteristics. It further describes IoT-enabling technologies; nominally cloud computing such as SaaS and PaaS. The centralization and infrastructure of Big Data systems, and how Cloud Computing gives a platform access to the data from anywhere. The paper explores IoT with big data architectural solutions for various use cases across the healthcare and transportation sectors.

In this paper, we discussed the motion of neutral and charged particles in Schwarzschild black hole immersed in an electromagnetic universe (SEBH). The SEBH represents a mass M coupled to an external electromagnetic field that was derived from the metric of colliding electromagnetic waves with double polarization. Our study examine how the external electromagnetic field affects the trajectory of neutral and charged particles. First, the trajectories of both photon and test particle are studied. Then, the exact solutions for the trajectories are obtained in terms of the Jacobi-elliptic integrals for all possible energy and angular momentum of test particle and photon. We have also discussed the motion of charged particle and obtained the radius of the innermost circular orbit (ISCO). It is especially interesting when the charge sign is positive since this creates a conflict between gravitational (attraction force) and electric (repulsion force). Furthermore, we discuss the Lyapunov exponent and the effective force influencing particles in SEBH spacetime.

Bismuth oxides are well-known electro-catalysts in fuel cells systems; they are usually used as anodic materials for the oxidation of low molecular weight alcohols. The utilization of BiO₂ and MnO₂ as catalysts in the pharmaceutical analysis is analytical method for the determination of heavy metal antibacterial agents in Pharmaceutical Dosage form is developed. The method is based on the voltammetric determination of heavy metal using Bidified platinum electrode by Bismuth oxide. The two components are oxidized at the Bidified electrode surface with the development of current that is linearly proportional to their concentrations in the range of 7.04*10^-7- 1*10^-3 M heavy metal. The oxidation reaction of the two components is pH-dependent, in which the buffer used is Britton-Robinson at pH = 7.00 where maximum peak current and maximum peak separation is obtained. The regression factors obtained from the calibration curves are 0.9812. The method of analysis was validated, where the limit of detection (LOD) and the limit of quantitation (LOQ) were calculated to be 1.44*10^-4 M, 4.36*10^-4 M and 1.27*10^-4 M, 3.84*10^-4 M respectively, the percentage recovery of both components was also calculated to 77 % for heavy metal.

Trends focused on the Global Innovation Index (GII) as a measure for progress of nanochemistry. This paper provides projections of recent developments in the word in nanochemistry based on the Global Innovation Index as a predictor for certain Arab countries. The GII is an annual ranking of countries by its ability and performance in innovation and is calculated on a basic average from five and two pillars in two sub-indexes, the Innovation Input Index and the Innovation Output Index. Each pillar represents a trait of creativity and consists of up to five measures, with a weighted average formula for measuring their ranking. In 2008, the GII rose to 36.3 in 2016 from 0.5. The GII is smaller than the GII in Arabic countries worldwide. During the years 2013-2016, the worldwide GII was increasing while for the same period, for Arabic countries, this decline could be explained by economic and industrial wars in the Arab region.

Ferrocene and its derivatives have ecologically effective antidetane properties. In this regard, ferrocene reacts with cyclic ketones and ferrosenylcarbinols are synthesized. It should be noted that ferrocene enters into electrophilic reactions and the process takes place in an acidic environment. In addition, the yield of the new product was small compared to the reactions of ferrocene with non-cyclic ketones. This is due to the spatial structures of molecules. The elemental analysis of obtained compounds was carried out; the structures were researched by cyclic voltammograms and Chronoamperometric.

As a consequence of a three-stage synthesis from terephthalic aldehyde, a series of 3,3 '- (1,4-phenylene) perchlorates including methyl, hydrogen, acetyl, bromio, methoxy and nitro groups (R = Br, H, Me). The matching formazans were reacted with formalin in dioxane in the presence of perchloric acid to produce tetrazin ium salts. Formazans were synthesized by reacting terephthalic aldehyde phenylhydrazone with ar ene diazonium tosylates in a DMF/pyridine combination. The use of ar ene diazonium tosylates greatly simplified the separation and purification of formazans. The p henylhydrazone was produced in aqueous dioxane using the usual approach from terephthalic aldehyde and phenylhydrazine/hydrochloric acid. Individual f ormazans and tetrazinium perchlorates were isolated and characterized by elemental analysis, IR, NMR, UV spectroscopy. The electrochemical reduction of tetrazinium perchlorates was investigated using cyclic voltammetry (CV). Thus, all salts in the cathode region have two one-electron reduction peaks, which are connected to the sequential production of a radical cation and a biradical. It was discovered that donor substituents (R: OMe, Me) in the aromatic ring at position 1 accelerate tetrazinium cation reduction, whereas acceptor substituents (R: NO₂, COMe,) inhibit this process. On this premise, it was proposed that in the presence of donor substituents in the aromatic ring at position 1, the matching bis-verdazyl radicals should be easily generated. As a result, 3,3'- (1,4-phenylene) perchlorates are possible antecedents of symmetric biradical systems based on verdazyl radicals.

This study on the production of a modern natural water electrochemical antimony (II) test include the use of platinum platinum electrode electrodes. Antimony (II) was pre-concentrated on the modified electrode surface and adsorbed to the surface, oxidizing at E = -680 mV. Compared to the platinum electrode, the platinum nanoelectrode exhibited superior performance and, unexpectedly, received a higher electrochemical response. After 25 min of accumulation, time the best-defined anodic peak was obtained with 0.2 mol L^-1 KNO₃ pH 5.0. Using these parameters, the L^-1 Sb ^{2 +} calibration plot was linear over range 1 = 10⁻⁸ to 5x10⁻⁶ mol. The precision was tested by carrying out eight replicate measurements at a concentration of 2.5x10⁻⁵ mol. L^-1; the variance coefficient was 2.9%. The method was applied to analyte determination in water samples from the river. Other metal ion attack on Sb's (II) voltammetric response has been studied. In the SEM image, the nanoparticle electrode was clearly observed and characterized by X-ray diffraction and cyclic voltammetry

In this paper, the boiling flow inside a nanochannel with 700000 argon particle has been simulated by molecular dynamics (MD) simulation. This approach has been employed to analysis the superheated flow and its heat transfer pattern as well. For all simulations an external thrust force varying from 1 PN to 12 PN is exerted on inlet nanoparticles along the channel to have the forced annular boiling flow. Computations reveal that saturation condition and superheat degree have significant impacts on the liquid-vapor interface. Furthermore, because of the major influence of surface tension throughout a nanochannel, the x-velocity of liquid film and vapor core has not considerable fluctuations and stay smooth. All provided results show the behaviors completely similar to the available outcomes in the literature.

Indonesia has a large area of degraded land, i.e. 30 million ha, which could potentially be utilized for biofuel plantations. The leguminous tree pongamia (Pongamia pinnata syn. Milettia pinnata) could be utilized to produce biofuel while restoring degraded land. Here, we explore the potential of pongamia as a source of biofuel and for restoring degraded land in Indonesia. Pongamia occurs across Indonesia, in Sumatra, Java, Bali, West Nusa Tenggara and Maluku. It grows to a height of 15–20 m and can grow in a range of environmental conditions. Its seeds can generate up to 40% crude oil by weight. It can help to restore degraded land and improve soil properties. Pongamia also provides wood, fodder, medicine, fertilizer and biogas. Therefore, as a multipurpose species, pongamia holds great potential to combat Indonesia’s energy crisis and to restore much of the degraded land.

This study explored the living situations, financial conditions, religious obligations, and social distancing of Muslims during the covid 19 pandemic. In total, 20 Muslim community members living in the Kanto region were recruited, 15 of them were included in the in-depth qualitative and five in the focus group interviews. The Snowball method was used, and the questionnaires were designed into four themes. The audio/video interviews were conducted via Zoom and NAVIO was used to analyse the data thematically. The major Muslim events were cancelled, and the recommended physical distancing was maintained during the prayers at home and in the mosques. The Japanese government's financial support to each person was a beneficial step towards social protection, which was highlighted and praised by every single participant. Regardless of religious obligations, the closer of all major mosques in Tokyo demonstrates to the Japanese community how serious they are about adhering to the public health guidelines during the pandemic. This study highlighted that the pandemic has affected the religious patterns and behaviour of Muslims from inclusive to exclusive in a community and narrated the significance of religious commitments.

Background. Recent studies revealed that differentiation of valvular interstitial cell into myofibroblasts played an important role in pathological valve remodeling in rheumatic valvular disease. Objective. To investigate effects of atorvastatin, olmesartan, and resveratrol on Transforming Growth Factor β1-induced fibrosis. Methods. Valvular interstitial cell was isolated from 12-weeks male New Zealand rabbit (Oryctolagus cuniculus). Culture cells was divided into 4 groups, control group, group I (0.5 mg/mL Atorvastatin), group II (100 nmol/L Olmesartan), group III (50 μM/L Resveratrol) and group IV (combinations). All group were exposed to 100 nM Transforming Growth Factor β1 for 24 hours. Results. Immunochemical staining demonstrated that cells were completely differentiated into myofibroblasts with mean expression of α-smooth muscle actin 24522.64±4566.994. Atorvastatin, olmesartan, resveratrol, and its combination significantly reduced α-smooth muscle actin expression (6823±1735.3, 6942.7±2455.9, 14176.2±3343.3, 5051.8±1612.2 respectively (p&lt;0.001). Conclusion. Our data showed atorvastatin, olmesartan, resveratrol, and its combination significantly reduce Transforming Growth Factor β1-induced valvular fibrosis.

Health care operations in many hospitals are experiencing increasing demand which is however hindered by the limited resources available. The imbalance between the demand and service provision capacity within the hospitals have resulted in long waiting times for service delivery due to overcrowding, high costs of treatment as well as low levels of patient’s satisfaction. The above problems are attributed to the development of hospital management information system. This dissertation is focused on investigating some of the causes of the increased cost and time consumption as well as low levels of patient’s satisfaction in the application of hospital management information system. The study used comparative design to make a comparison of the respondents from two different hospital facilities where 400 health workers were drawn for research. The questionnaire was used as a survey tool for the study that involved both qualitative and quantitative analysis. The results of the study indicate various playing factors that arise due to the development of the hospital management information system. These factors include the large functionality of the system, the need for training of the end users, the increasing ageing population, and delays. The identified factors play a significant role in the way the information system impacts the time taken, the cost involved, and patient satisfaction. Keywords: health, hospital, doctors, technology, information system, time, and cost.

Abstract In This research we will describe how to deal the system with users to make the work in the company or in any work space . in application forms interact with users inside the system . application form of any system must creates a many graphical interface for user ant we should take care about who is dealing with the system , Additionally, application forms used from different type of user so that we must take care about this points during designing the system for different users . Application Forms in the system consists of many programs, or components and function we are designing it. the instructions inside program can be execute by clicking on the command button and we can create specific process in the system.

This paper has experimentally measured volcanic tufa electrical conductance. The calculations are carried out in accordance with the potential of cyclic voltammetry in a constant state. The cyclic voltammograms nanoelectrode platinum prepared electrochemically were examined in the range -0.2 to 1.2 V vs. AgCl [Cl^-]:1.0 M in the presence and absence of volcanic tuff in the aqueous solution of 1.0 M HCl. The cyclic voltammetry studies show that the Nano platinum film suffers degradation when the potential exceeds +0.85 V, and below this potential, it is quite stable. The redox reaction of the electrode is reversible. The nanoparticle platinum synthesized at low temperature and high acid concentration exhibits higher electronic conductivities. It has been observed that, relative to area under the peak aggregate tests, the use of volcanic concrete was showing a large increase in electrical conductivity. It was shown that with cyclic voltammetry, three well-defined anode peak could be achieved at a power of 0.0, 0.4 and 0.6 V versus Ag/AgCl.

It is important to increase the quality of health and medicine. A wearable system for continuous monitoring of the patient is important to overcome this issue. Thus a patient with Arrhythmia due to its low cost and success in saving the life of the patient was the right option for the care partner. In addition, the device will provide a consumer with a smart smartphone application with accurate pulse beat and body temperature data in real time. MAX 30100 and LM35 are primarily used for the detection of human heart and temperature. The performance of these sensors is generated by an arrhythmia algorithm in the esp32 segment.

An electrochemical sensing platinum nanoparticle in the tantalum electrode is provided by means of an Ion Beam Sputtering Deposition (IBSD). The electrode was made with a Pt solution, sputtered simultaneously with hydrochloric acid corrosion on tantalum substrate. In the study of heavy metal ions, for example, the platinum nanoparticle electrodes as prepared were used Square wavelength voltammetry (OSWV) Hg²⁺, Cu²⁺ and Ag²⁺. The porous electrodes were observed in a broader range by the Pt nanostructure electrode for heavy metal ions. Furthermore, the susceptibility to detection has been shown to be saturated as the thickness of the layer electrode exceeded 50 nm. For Hg²⁺ 0,003-1 M, for Cu²⁺ 0,005-3 M and for Ag²⁺ the linear detection scale is 0,009-4 M. There has also been good reusability and repeatability. In addition, a scan electron microscope (SEM) used to study platinum electrode forming process and nanostructure. This electrode will have interesting applications in sensing systems.

Today, contamination from heavy metals in the atmosphere is a global concern. Efficient detection techniques are therefore necessary if heavy metal exposure levels in different media are to be determined. The voltammetry method for in situ detection of heavy metal ions is a very sensitive electrochemical method. This thesis explores emerging developments in electrode alteration, materials production and experimental optimization. An electrochemical sensing platinum nanoparticle in the tantalum electrode is provided by means of an Ion Beam Sputtering Deposition (IBSD). The electrode was made with a Pt solution, sputtered simultaneously with hydrochloric acid corrosion on tantalum substrate. In the study of heavy metal ions, for example, the platinum nanoparticle electrodes as prepared were used Square wavelength voltammetry (OSWV) Hg²⁺, Cu²⁺ and Ag²⁺. The porous electrodes were observed in a broader range by the Pt nanostructure electrode for heavy metal ions. Furthermore, the susceptibility to detection has been shown to be saturated as the thickness of the layer electrode exceeded 50 nm. For Hg²⁺ 0,003-1 M, for Cu²⁺ 0,005-3 M and for Ag²⁺ the linear detection scale is 0,009-4 M. There has also been good reusability and repeatability. In addition, a scan electron microscope (SEM) used to study platinum electrode forming process and nanostructure. This electrode will have interesting applications in sensing systems.

In computer networks, loss of data packets is inevitable, in particular, because of the buffer memory overflow of at least one of the nodes located on the path from the source to the receiver, including the latter. Such losses associated with overflows are hereinafter referred to as congestion of network nodes. There are many ways to prevent and eliminate overloads; these methods, in the majority, are based on the management of data flows. A special place is taken by the maintenance of packages, taking into account their priorities. The article considers a number of original technical solutions to improve the quality of control and reduce the required amount of buffer memory of network nodes. The ideas of these solutions are quite simple for their implementation in the development of appropriate software and hardware for telecommunication devices.

This paper presents a methodology for the integration of Building Information Modeling (BIM) and Life Cycle Cost Analysis (LCCA) to assess the economic implications of designing aging-in-place (AIP) homes at the conceptual stage. With the global increase in the aging population, there is an increased demand for housing solutions tailored to the needs of elderly individuals. Focusing on the importance of the early phase of design, this study aims to improve the process of making efficient decisions by providing a comprehensive assessment of the life cycle costs associated with AIP homes. The study introduces a semi-automated model for the economic evaluation of AIP homes, enabling the estimation of costs throughout the houses’ entire life cycle, from design and construction to operation, maintenance, and eventual renovation or disposal. The said model facilitates the exploration of the long-term economic feasibility of design’s related decisions with an emphasis on the importance of considering the life cycle costs early during the design process to optimize the functionality and economic viability. By investing in accessible and universal design features upfront, the initial costs for modifications can lead to long-term savings by reducing the need for extensive retrofits. The model can easily do comparison between different design alternatives in terms of their lifecycle costs, allowing designers to assess the financial impact of using important features in their design such as wider doorways, accessible bathrooms, and elevators. Overall, this study provides valuable insights for designers and homeowners about the economic aspects of designing AIP homes as a support for efficient decision-making during the early stages of the design process.

As Li-ion batteries use is spreading, incidents in large energy storage systems (stationary storage containers, …) or in large-scale cell and battery storages (warehouse, recyclers, …), often leading to fire, are occurring on regular basis. Water remains one of the most efficient fire extinguishing agents for tackling those battery incidents and large quantities are usually necessary. Since bat-teries contains various potentially harmful components (metals and their oxides or salts, sol-vents…) and that thermal runway induced battery incidents are accompanied with complex and potentially multistage fume emissions (containing both gas and particles) the potential impact of fire run-off water on the environment should be considered and assessed carefully. The tests presented in this paper focus on the analysis of the composition of run-off waters used to spray NMC Li-ion modules under thermal runaway. It highlights that waters used for fire-fighting are susceptible to contain many metals, including Ni, Mn, Co, Li and Al mixed with other carbonaceous species (soot, tarballs) and sometimes undecomposed solvents used in the elec-trolyte. Extra-polation of pollutant concentrations compared with PNEC values showed that, for large scale incidents, run-off water could be potentially hazardous to the environment.

Background: Delivery of quality family planning services depends on availability of skilled health care providers, which is often a challenge in Low- and middle-income countries. This study evaluates the effects of a targeted training program on family planning services delivered by the Lady Health Workers (LHWs) in six districts of Punjab, Pakistan. The primary goal was to enhance the quality and accessibility of family planning services, recognizing the pivotal role of LHWs in community health. Methods: Using a robust panel data difference-in-differences (DiD) approach, we analyzed the electronic medical records (EMR) of 1,410 LHWs over a nine-month period. This timeframe in-cluded both pre-training (July to December 2022) and post-training (April to June 2023) phases. Our assessment focused on the impact of training on five outcome variables: the number of follow-up clients, the number of Intrauterine Contraceptive Device (IUCD) clients, the number of condom clients, the number of modern method clients, and the number of injection clients. We also con-sidered control variables such as LHW age, LHW education, the number of eligible couples in each LHW's catchment area, and a categorical variable for the districts. Results: The positive and statistically significant (p<0.05) coefficients across various service cat-egories – Follow Up Clients [Coeff: 1.00, CI: (0.30 - 1.70)], IUCD Clients [Coeff: 0.23, CI: (-0.01 - 0.46)], Condom Clients [Coeff: 1.41, CI: (0.97 – 1.86)], Modern Method Clients [Coeff: 1.82, CI: (0.96 – 2.68)], and Injection Clients [Coeff: 0.32, CI: (0.14 – 0.50)]. These findings indicate enhanced productivity among LHWs who have received training, with results significant at the 95% con-fidence interval (CI). Conclusion: The study highlights the effectiveness of targeted training programs in boosting family planning services at the community level and offers insightful implications for policy-makers and health practitioners. While focused on six districts in Punjab, these promising results emphasize the need for ongoing training and support for frontline health workers to bolster family planning initiatives.

The objective of this study is to determine the relationship between body condition score (BCS) and body carcass fat (BCF) of ewes at two key stages of the production cycle. Data were collected from 88 Coopworth ewes including BCS measurements manually evaluated by the farm manager, BCF measurements determined by computerized tomography (CT) and body parameter measurements automatically determined by an image processing application. Artificial neural network (ANN) statistical analysis method was used to develop a relationship between the body parameters and the BCF with an r2=0.96 and RMSE=1.01 using all top and side variables.

Pulmonary fibrosis causes scar tissue formation that disrupts the functioning of the lungs. Uncaria gambir (Hunter) Roxb (hereafter gambir)—a plant native to West Sumatra in Indonesia—contains flavonoid (+)-catechin and has strong antioxidant activity, and it can be used to combat pulmonary fibrosis. This random in vivo experimental study analyzed the antifibrotic effect of gambir on the lungs of rats with bleomycin-induced fibrosis. The subjects were 10 groups of 10-week-old male rats weighing around 200–250 g. All groups were terminated at the end of the seventh week or on day 50. The lungs were cleaned, and tissues were taken to analyze inflammatory cell counts and TGF-β1 levels using bronchoalveolar lavage (BAL) with ELISA; type I collagen and tissue inhibitor of metalloproteinase 1 (TIMP-1) levels using immunohistochemistry (IHC); and activation of NF-κB using ELISA and Western blot assays. The most severe histopathological characteristic based on the modified Ashcroft score was in the bleomycin group (BG), whereas the mildest was in the 262 mg/kg of bodyweight antifibrotic gambir-dosed group (AF G262). The results showed a significant difference in the BAL inflammatory cell count (p = 0.017; p &lt; 0.05). AF G262 differed most from the other antifibrotic groups in terms of the number of inflammatory cells (0.63), TGF-β1 levels (3.80), and NF-κB levels (0.48), followed by the 131 mg/kg of bodyweight antifibrotic gambir-dosed group (AF G131), which also differed most from other antifibrotic groups in terms of NF-κB (0.48), TIMP-1 (11.74), and collagen I (14.50) levels. Western blot analysis showed that the fibropreventive and antifibrotic groups had a specific band size of p65, whereas no specific band binding existed in the control group. This study concluded that the administration of AF G262 could improve fibrosis by lysing the extracellular matrix (ECM) in rat lungs.

Abstract: Background: Stunting is primarily a public health concern in LMIC. The involvement of Integrated Service Post cadres is one of the strategies to combat stunting in Indonesia. Objective: This study aimed to determine the effect of a short course on cadres knowledge. Method: A single group pre-post test design was conducted in Yogyakarta, Indonesia, from March to May 2022. Thirty cadres were selected based on the following criteria: willingness to participate, the number of stunted children in their Integrated Service Post (Posyandu), and full attendance at short course. The knowledge scores were measured by a structured questionnaire after short course (post-test 1) and 4 weeks later (post-test 2). We apply STATA 16 to calculate the mean difference (MD) using a t-test and Generalized Estimated Equation (GEE). Furthermore, the adequacy of the short course was evaluated with in-depth interviews. Result: On post-tests 1 and 2, cadres' knowledge of IYCF, children growth monitoring (CGM) and children development monitoring (CDM) significantly improved. The GEE analysis showed that a short course significantly improves cadres' knowledge after age control, education, occupation, and years of experience. Conclusion: Short course in-creased their affection, self-efficacy, and confidence, hence, they are capable of assisting children through home visits.

Aravalli Mountain Range is an example of erosional mountains, trending NE-SW, shows numerous faults and lineaments. Udaipur area, situated south-east part of the mountain, is considered as tectonically active. So the main objective is to study relative tectonic activity of the Ahar watershed of Udaipur, Rajasthan, India. To assess relative tectonic activity of the area, geomorphic indices such as stream length gradient index (SL), asymmetry factor (Af), basin shape (Bs), valley floor width to valley height ratio (Vf), mountain front sinuosity (Smf), hypsometic integral (Hi), hypsometric curve and transverse topographic symmetry factor (T) is applied. DEM (SRTM), Google earth image and enhanced image of Landsat TM (2008) is used to extract linear features. Result of these geomorphic indices of each sub-watersheds are used to divide area from low to high relative tectonic activity classes, expressed as relative tectonic active index (Iat) and according to Iat value the sub watershed UDSW2, 3 and 4 is tectonically relatively more active than remaining part of the area. Field validation associated with evidences highlighted by using geomorphic indices as well as stream deflrction and lineament analysis reveals that the Ahar watershed of Aravalli Range, particularly the north-western flank, is most affected by tectonic activity.

Thermoelectric (TE) waste heat recovery has attracted significant attention over the past decades, owing to its direct heat-to-electricity conversion capability and reliable operation. However, methods of system-level TE design optimization for specific application systems have not been thoroughly investigated. This work theoretically studies the performance optimization and exergy analysis of TE systems for recovering waste heat from the exhaust ducts of a gas turbine power plant. A numerical tool has been developed to solve the coupled charge and heat current equations with temperature-dependent material properties and convective heat transfer at the interfaces. Our calculations show that at the optimum design with 50 % fill factor and 6-mm leg thickness made of state-of-the-art Bi2Te3 alloys, the proposed system can reach power output of 10.5 kW for the TE system attached on a 2 m-long, 0.5 x 0.5 m2-area exhaust duct with system efficiency of 5 % and material cost per power of 0.23 $/W. Moreover, our extensive exergy analysis reveals that only 1 % of the exergy content of the exhaust gas is exploited in this heat recovery process and the exergy efficiency of the TE system can reach 8 % with improvement potential of 85 %.

Online identity-based theft is known to be one of the most serious and growing threats to victims, such as individuals and organizations, over the last 10 years due to the enormous economic damage these crimes have caused. The availability of personal information on the Internet has increased the chances of this cyber-crime. Online identity theft crime is the result of a combination of cyber-crimes on the one hand and lack of awareness and training of users on the other hand to protect personal data on the other. Education and awareness, which also contributes to early detection, is the strongest tool for consumers to safeguard themselves from online identity fraud. This paper provides a comprehensive explanation of online identity theft, the various approaches that thieves use to attack individuals and organizations and the types of fraud involved in this cyber-crime. The aim of this research is to evaluate the need for a reformulation of the concept of identity theft in order to be compatible with the evolution of behaviors and fraud.

This study discusses the experimental assessment of the in-plane mechanical behavior of a multi-leaf stone masonry wall built from cut stone and reinforced with metal connectors (cramps and dowels). The wall, inspired by conventional multi-leaf stone walls, is meant for use in modern stone masonry buildings. The wall is constructed from two parallel load-bearing walls with a cavity between them, which aims to conceal the installation and insulation needed in modern buildings. The load-bearing walls are connected with cramps and dowels at certain intervals so that the wall works as a single section against horizontal and vertical loads. To characterize the in-plane behavior of the proposed wall, compressive, triplet, and diagonal compression tests were conducted to investigate the compressive strength, shear strength, modulus of elasticity, stiffness, ductility, and energy absorption of the wall. Compared with dry and mortar joint walls, the use of dowels increased the initial shear capacity of the wall by 11 and 19 times, respectively. The application of cramps without curving channels inside the individual stone elements decreased the compressive strength by 18%. The energy absorption of the designed walls with metal connectors was substantially increased to that of the specimens representing conventional stone walls. The results obtained show the applicability of the wall due to its higher shear strength and minimal drop in compressive strength, which is within acceptable limits.

Introduction. Recent studies revealed that differentiation of valvular interstitial cell into myofibroblasts played an important role in pathological valve remodeling in rheumatic valvular disease. Objective. To investigate effects of atorvastatin, olmesartan, and resveratrol on Transforming Growth Factor β1-induced fibrosis. Methods. Valvular interstitial cell was isolated from 12-weeks male New Zealand rabbit (Oryctolagus cuniculus). Culture cells was divided into 4 groups, control group, group I (0.5 mg/mL Atorvastatin), group II (100 nmol/L Olmesartan), group III (50 μM/L Resveratrol) and group IV (combinations). All group were exposed to 100 nM Transforming Growth Factor β1 for 24 hours. Results. Immunochemical staining demonstrated that cells were completely differentiated into myofibroblasts with mean expression of α-smooth muscle actin 24522.64±4566.994. Atorvastatin, olmesartan, resveratrol, and its combination significantly reduced α-smooth muscle actin expression (6823±1735.3, 6942.7±2455.9, 14176.2±3343.3, 5051.8±1612.2 respectively (p<0.001). Conclusion. Our data showed atorvastatin, olmesartan, resveratrol, and its combination significantly reduce Transforming Growth Factor β1-induced valvular fibrosis.

Pollution by heavy metals is one of the most severe environmental issues that threaten global sustainability. This review presents a recent advance in electrochemical sensors for heavy metal detection Rotating Disk Platinum Electrode are discussed. This study on the production of a modern natural water electrochemical antimony (II) and cupper (II) test include the use of platinum electrode. Antimony and cupper were pre-concentrated on the modified electrode surface and adsorbed to the surface, oxidizing at E = 540 mV and E = 85 mV, respectively. After 20 min of accumulation, time the best-defined anodic peak was obtained of surface. The precision was tested by carrying out chronoamperometric measurements at a concentration of Sb⁺² and Cu⁺² 8.5x10^-8 M and 9.5x10^-7 M, respectively.

Despite the 12-lead electrocardiogram (ECG) being the gold standard in evaluating clinical presentations of arrythmias of various kinds, several notable limitations, namely in accuracy and localization, have recently garnered concern with respect to administering appropriate therapeutic measures. The following text puts these limitations under the spotlight, highlighting the difficulty and challenging nature of standard ECG analysis and therapeutic measures, while simultaneously showing a novel body surface electrocardiographic mapping system that utilizes 3D spatial imaging and pinpoint localization algorithms in order to compensate for the shortcomings of the standard ECG, thereby providing higher precision data collection. We provide a brief overview of the novel device in a selection of arrhythmic demographics, along with its validity and reliability, while illustrating the benefits and positive outcomes of its utility.

The new emergence and re-emergence of arbovirus infections vectored by Aedes mosquitoes have been spread across Southeast Asia, Central Africa, United States, tropical Oceania and become a major of public health concerns. These arbovirus diseases found to have a similar vector, symptoms of the diseases and environments. The situation has become complicated without any specific vaccine or treatment for the diseases. As far as we concern, vector control is the best defense with many challenges, a scattered breeding site and biological behavioral sometimes, more difficult to control. Herein, we present a review of studies on current techniques proposed to combat arbovirus infections vectored by Aedes mosquitoes. A crucial gap in a vector control program is the inability to eliminate and destroy the cryptic breeding site by using conventional control methods. The idea and proper concept of using mosquitoes to bring insecticide to their oviposition site had been getting more interest in people to explore. Autodissemination is a self-delivery technique by manipulating the behavior of mosquitoes, carrying the insecticide and disseminate to cryptic breeding sites. This technique has shown a promising result in some countries and can be considered as additional tools in a vector control program

Big Data classification has recently received a great deal of attention due to the main properties of Big Data, which are volume, variety, and velocity. The furthest-pair-based binary search tree (FPBST) shows a great potential for Big Data classification. This work attempts to improve the performance the FPBST in terms of computation time, space consumed and accuracy. The major enhancement of the FPBST includes converting the resultant BST to a decision tree, in order to remove the need for the slow K-nearest neighbors (KNN), and to obtain a smaller tree, which is useful for memory usage, speeding both training and testing phases and increasing the classification accuracy. The proposed decision trees are based on calculating the probabilities of each class at each node using various methods; these probabilities are then used by the testing phase to classify an unseen example. The experimental results on some (small, intermediate and big) machine learning datasets show the efficiency of the proposed methods, in terms of space, speed and accuracy compared to the FPBST, which shows great potential for further enhancements of the proposed methods to be used in practice.

The water quality of the river is becoming deteriorated due to human interference. It is essential to understand the relationship between human activities and land-use types to assess the water quality of a region. GIS has the latest tool for analyzing the spatial correlation. Land use land cover and change detection is the best illustration to show the human interactions on land features. The study assessed water quality index of upper Ganga River near Haridwar, Uttarakhand and spatially correlated them with changing land use to reach a logical conclusion. At the upper course of Ganga along 78 Km long from Kaudiyala to Bhogpur, water samples were collected from five stations. For water quality index the physicochemical parameters like pH, EC, DO, TDS, CaCO3-, CaCO3, Cl¯, Ca++, Mg++, Na+, K+, F-, Fe2+ were considered. The result of the spatial analysis was evaluated through error estimation and spatial correlation. The root mean square error between spatial land use and water quality index of selected sampling sites was estimated as 0.1443. The spatial correlation between land-use change and site-wise differences in water quality index has also shown a high positive correlation with R² = 0.8455. The degree of positive correlation and root mean square error has strongly indicated that the water quality of the river at the upper course of Ganga is highly impacted through human activities.

Bread wheat (Triticum aestivum L.) is staple of Pakistani people. However, its yield at farmer field is low as compared with its genetic potential. Integration of various crop and soil management strategies might be an option to enhance wheat productivity at farmer field. This 2-year experiment was conducted to check the influence of combine application of natural plant water extracts and biochar on the productvity of wheat during the winter season of 2015-16. The experiment consisted of seven treatment viz. (1) control (2) application of biochar (0.18 kg pot-1) alone, (3) application of sorghum water extract (SWE) alone, (4) application of moringa water extract (MWE) alone, (5) application of biochar + SWE, (6) application of biochar + MWE, (7) application of biochar + SWE+MWE. The results revealed that application of both crop water extracts in combination with biochar improved the growth and grain yield of wheat. Use of MWE in combination with biochar enhanced the grain weight, grain number and grain yield of wheat by 44, 14, and 24%, respectively than the control treatment. In crux, use of MWE in combination with biochar might be a viable option to improve the productivity of bread wheat.