During the COVID-19 pandemic, the education sector of Bangladesh suffered a lot. To adapt to this uncertain situation, the online teaching-learning method was introduced for the first time in the dental colleges to continue regular classes. This qualitative study explored the in-depth perception among students of this new, affordable, flexible online learning method and to find out the scope of improvement of the delivery method. Two focus group discussions (FGD) were conducted, each including 6-8 participants (N=16, the male: female ratio was 7:9) for gaining an in-depth understanding of the perception of online teaching among the dental students. With the help of the trigger questions, the facilitator and moderators conducted both the FGDs. By analysing the Focus group discussion, four distinct themes were identified. The main themes extracted from the data refer to the difficulties which students faced during participation in online classes (e.g., low attention span, unusual timing of classes, internet accessibility, power cut, boring content, etc.), advantages of online learning (e.g., saves time, able to continue studying during the lockdown, saves money, avoids commuting, being safe during a pandemic situation, one can participate in classes if sick, etc.), disadvantages of online classes (e.g., not feasible for clinical classes and lab works, lack of social interactions, lack of group study, long screen time, lack of after class peer discussion, lack of engagement, etc.), and also scopes of improvements (e.g., technological training for staff, recorded classes, technological orientation for students, more engaging contents, online support, more interactive lessons, short duration of the class, break after 30-45 minutes and also teachers training for online facilitation, etc.). In Bangladesh, the online teaching-learning method is not a regular practice. Most of the institutions were forced to adopt this method on very short notice because of the COVID-19 pandemic lockdown. Online education in a clinical subject like dentistry requires a special training program, online content preparation, and interactive lesson delivery setup which are big challenges for a re-source-constrained medical education setup. The focus group discussion unveiled some key issues which indicated that there are many scopes for improvement in online teaching methods. With the help of the medical education department and through faculty development the online learning sessions can be made attractive as well as beneficiary for the key stakeholders.

In this paper, our goal is to establish the relationship between solutions of local sharp vector variational type inequality and sharp efficient solutions of vector optimization problems, also Minty local sharp vector variational type inequality and sharp efficient solutions of vector optimization problems, under generalized approximate $\eta$-convexity conditions for locally Lipschitzian functions

As an on-going pandemic caused by the out-break of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) or simply COVID-19 sweeps through the globe at an unprecedented rate leaving behind trails of high infection and mortality, it is crucial to understand the propagation dynamics of the virus in a host population in order to take urgent and effective remedial and mitigating steps to save life. It is already observed in many countries and communities that accurate and timely testing, tracing, and tracking of the infection lead to better containment and slowing down of the spread. In this exploratory research, the early growth dynamics of infection within a population is pursued based on real data. The study posits that the early growth in a homogenous population follows an exponential pattern motivating further rigorous quantitative treatment based on a number of analytical models such as logistic model, Richard’s model, and Gompertz model– the acceleration pattern of the outbreak is ascertained from the daily inflection data, and regression analysis against population models yields dynamic growth indices which allow very accurate prediction of the successive outbreak size when calibrated continually with updated data. The performance of the various models is evaluated with the real dataset. More, the basic reproduction number of the COVID-19 virus propagation in the community is estimated based on the on-set phase dataset using multi-compartmental epidemiological model. Also, the maximum infection size, infection doubling time and the scope of the herd immunity are also inferred for COVID-19 in a population.

This study optimizes the placement and farm layout of Vertical Axis Wind Turbines (VAWTs) using a neural fuzzy network, an advanced machine learning system, and meta-heuristic algorithms. The methodology introduces a novel approach to enhance turbine efficiency and overall farm performance. The objective is to determine the optimal configuration of vertical axis wind turbines using a neural-fuzzy system and meta-heuristic optimizers. Turbine efficiency and power generation rates are assessed through three-dimensional numerical simulations based on the Reynolds-averaged Navier-Stokes equations. This innovative design, featuring straight blades with bevel-angle vortex generators, represents a significant advancement over traditional straight-blade VAWTs. Comparative analyses demonstrate that the oblique configuration exhibits higher average output moment and power. A novel concept integrates the strengths of Darrieus VAWTs, enhancing efficiency through vortex generator integration. Simulation results are validated with empirical data, confirming the superior aerodynamic efficiency and increased power generation of the oblique configuration. Inspired by the optimal group movements of birds, this study recommends adopting the oblique arrangement for improved wind turbine performance.

The study, conducted at the Department of Medicine, Maulana Azad Medical College and associated Lok Nayak Hospital, aimed to investigate the prevalence of iron deficiency anaemia among anaemic overweight and obese individuals. Fifty participants were included after screening and consent, undergoing socio-demographic assessment, clinical evaluation, and laboratory investigations. Middle to old-aged individuals predominated (Mean ± SD: 54.54 ± 11.32 years), with females comprising 62%. All subjects were obese (mean BMI: 37.27 ± 5.71 kg/m²), with common comorbidities including hypertension (68%), diabetes (36%), and obstructive sleep apnea-hypopnea syndrome (32%). Nutritional deficiencies, particularly iron deficiency, were prevalent, affecting 62% of subjects, with 48% having iron deficiency alone. Anemia of chronic illness was observed in 38%. Laboratory parameters showed low hemoglobin (8.53 ± 1.23 g/dL), MCV (78.75 ± 10.13 fL), and elevated ESR (20.56 ± 21.47 mm/hour) and CRP levels (4.71 ± 3.32 mg/dL), indicating inflammation. Correlation analyses revealed negative associations between BMI and serum iron/ferritin and positive associations with serum hepcidin. The study underscores the significance of addressing nutritional deficiencies and monitoring iron status in obese populations, suggesting potential associations between obesity and iron metabolism. Further research is needed to explore these relationships for clinical management implications.

Establishing systemic communications between the project plan, stakeholders, and the organization through integrated management meets stakeholders' demands and managerial expectations in project-oriented organizations. Performance assessment can be defined as a control system in any company that reviews its daily operations and evaluates how well it has achieved its goals. This study aims to investigate the impact of an integrated project management system on the financial performance of the Organization for Renovation, Development, and Equipment of Schools. This applied research is descriptive-analytical. The statistical population comprises 2,700 employees of the organization, with a sample size of 340 individuals examined. The reliability of the designed questionnaire was confirmed by experts in the organization using Cronbach's alpha (α=0.91). Data were analyzed using SPSS version 20 and AMOS 18 software through descriptive statistics and confirmatory factor analysis. The results indicate that the seven dimensions of the integrated project management system (cost management, quality management and continuous control, change management, systems and information management, human resources management, interaction and communication management, procurement management) have a positive and significant impact on the financial performance of the Organization for Renovation, Development, and Equipment of Schools.

Although, promotion of urbanization culture in recent decades has made inevitable development of cities in the world, however, the development can be guided in a direction that leave, to the extent possible, minimum socioeconomic and environmental impacts. For this, it is required to first forecast auto-spreading orientation of cities and suburbs in rural areas over time and then avoid shapeless growth of cities. This paper is an attempt to develop a dynamic hybrid model based on logistic regression (LR), Markov chain (MC), and cellular automata (CA) for prediction of future urban sprawl in fast-growing cities. The model was developed using 12 widely-used urban development criteria, whose significant coefficient was determined by logistic regression, and validated by relative operating characteristic (ROC) analysis. The validated model was run in Guilan, a tourist province in northern Iran with a very high rate of urban development. For this, changes in the area of urban land use were detected over the period of 1989 to 2013 and then, future sprawl of the province was forecasted by the years 2025 and 2037. The analysis results revealed that the area of urban land use was increased by more than 1.7 % from 36012.5 ha in 1989 to 59754.8 ha in 2013, and the area of Caspian Hyrcanian forestland was reduced by 31628 ha. The results also predicted an alarming increase in the rate of urban development in the province by the years 2025 and 2037, during which urban land use is predicted to develop 0.9 % and 1.38 %, respectively. The development pattern is expected to be uneven and scattered, without following any particular direction. The development will occur close to the existing or newly-formed urban basements as well as around major roads and commercial areas. This development, if not controlled, will lead to the loss of 13863 ha of Hyrcanian forests and if the trend continues, 21013 ha of Hyrcanian forests and 20208 ha of Barren/open lands are expected to be destroyed by the year 2037. In general, the proposed model is an efficient tool for the support of urban planning decisions and facilitates the process of sustainable development of cities by providing decision-makers with an overview on future development of cities where the growth rate is very fast.

Responsible, efficient, and environmentally conscious energy consumption practices are increasingly essential for ensuring the reliability of the modern electricity grid. This study focuses on leveraging time series analysis to improve forecasting accuracy, crucial for various application domains where real-world time series data often exhibit complex, non-linear patterns. Our approach advocates for utilizing Long Short Term Memory (LSTM) and Bidirectional LSTM (BiLSTM) models for precise time series forecasting. To ensure a fair evaluation, we compare the performance of our proposed approach with traditional neural networks, time-series forecasting methods, and conventional decline curves. Additionally, individual models based on LSTM, Bi-LSTM, and other machine learning methods are implemented for a comprehensive assessment. Experimental results consistently demonstrate that our proposed model outperforms all benchmarking methods in terms of mean absolute error (MAE) across most datasets. Addressing the imbalance between activations by consumer and prosumer groups, our predictions show superior performance compared to several traditional forecasting methods, such as the Autoregressive Integrated Moving Average model (ARIMA) and Seasonal Autoregressive Integrated Moving Average model (SARIMA). Specifically, the root mean square error (RMSE) of Bi-LSTM is 5.35%, 46.08%, and 50.6% lower than LSTM, ARIMA, and SARIMA, respectively, on the May test data.

The accurate forecasting of solar power output is essential for ensuring the stable and efficient operation of grid-connected photovoltaic (PV) systems, especially when faced with variable weather patterns. This research focuses on the integration of Machine Learning (ML) methodologies and climatic parameters to predict solar panel energy generation, with a specific emphasis on addressing consumption-production imbalances. Leveraging a dataset sourced from the Kaggle platform, the study is conducted in the context of Estonia, aiming to optimize solar energy utilization in this geographic region. The dataset, obtained from Kaggle, encompasses comprehensive information on climatic variables, including sunlight intensity, temperature, and humidity, alongside corresponding solar panel energy output. Leveraging machine learning algorithms, including XGBoost regression and neural networks, our model aims to identify complex patterns and relationships within the datasets. By tailoring the model to Estonia's climatic nuances, we seek to enhance the accuracy of energy production forecasts and, consequently, better manage the challenges associated with consumption-production imbalances. Furthermore, the research investigates the adaptability of the proposed model to diverse climatic conditions, ensuring its applicability for similar endeavors in other geographical locations. The performance of the forecasting model will be evaluated using error metrics like mean absolute error (MAE) and root mean squared error (RMSE). This study leverages a comprehensive dataset from Kaggle and utilizes advanced machine learning techniques to generate valuable insights. These insights can inform the development of sustainable energy policies and practices, ultimately leading to a more efficient and reliable renewable energy infrastructure.

The speed-density or flow-density relationship is a fundamental aspect of traffic flow theory. Single-regime models often face challenges in consistently fitting empirical data under diverse traffic conditions. This paper addresses the inaccuracies of single-regime models, attributing them not only to their functional forms but also to data dispersion and sample selection bias. To mitigate these issues, the data is segmented into day and night periods, leading to the creation of separate models for each. Calibration results, conducted on data from two freeways, Tehran-Karaj and Tehran-Qom, reveal distinct challenges, with the former exhibiting high dispersion and the latter showing low dispersion. Surprisingly, single-regime models demonstrate notable effectiveness when applied to distinct day and night data. Further analysis, categorizing data into day and night, results in reduced errors (20-60% improvement in R-Square), emphasizing the potential for enhanced accuracy by considering distinct regimes. Overall, the study underscores the significance of regime-specific considerations for accurate traffic flow modeling. Upon thorough evaluation, the study highlights the superiority of the neural network Multi-layer Perceptron (MLP) over traditional models. The research discusses the implications of incorporating day and night parameters into the models, emphasizing their potential for accuracy enhancement.

Solvents are widely-used in all aspects of chemical sciences. One of the disadvantages of conventional solvents is attributed to the adverse impacts they pose on human health and ecological systems. Emerging class of solvents such as ionic liquids have been proposed to alleviate this problem. In this study, aquatic toxicity and biodegradability of two common industrial solvents are compared to those of two ionic liquids. Results from this study highlight the importance of solvent selection considering the information on the toxicity, biodegradability and fate and transport properties of selected solvents altogether.

Based on the definition of double fuzzy relations, two types of new rough set models are constructed, which are multi-granulation double fuzzy rough sets called optimistic and pessimistic multi-granulation double fuzzy rough sets, and some of their properties were studied. In addition, we study the relationship between optimistic and pessimistic multi-granulation double fuzzy rough sets and double fuzzy rough sets.

The development in the field of ceramics has been increasing over the past several decades. Among all of the dental ceramics, zirconia ceramics show very good mechanical properties and a significant improvement in mechanical function. However, it is properly established that each step of the fabrication process of zirconia ceramics must be controlled to achieve the expected mechanical properties. These steps include the block constructing, sintering process, machining and surface processing. Recent advances have focused on zirconia ceramics in forming and sintering processes, mechanical properties, combining with various materials, and on surface processing. All these items provide conceptions about the formability and machinability of the zirconia. Until now, very excellent studies have been done to specify the evolution of microstructures, phase and mechanical properties of zirconia ceramics during the sintering process. However, more studies are required in this field. This paper aims to demonstrate general views and various studies in the field of zirconia ceramics. The properties, applications and tests performed and the recent developments in the field of zirconia bioceramics are discussed.

The main objective of this study was to compare the removal efficiency of nutrients using Lactuca sativa, Medicago sativa and Phragmites australis in subsurface flow constructed wetlands with horizontal flow. In order to test water quality, fabricated reactors designed and the plants cultivated in the soil while their root were inside the wastewater. A long time study carried out from spring till end of autumn (9 months) in order to evaluate the difference in removal rate based on the seasonal changes. The highest removal rate was during summer which followed by spring and autumn. Thus, the effect of plants on the removal efficiency of organic matter (COD, BOD), TSS and nutrient (P and TN) appeared to be dependent on the seasonal growth. Phragmites australis the most sensitive species in order the removal of nutrient from wastewater.

The principal aim of this descriptive-survey investigation is to ascertain the factors influencing individuals' choice to purchase organic commodities in Tehran. The statistical populace for this examination comprised all patrons of food retail establishments in Tehran, with the sample size determined using the Cochran formula for an unknown community size, involving the distribution of 30 questionnaires to customers (n=439). Data collection was carried out through a random sampling technique. The survey instrument consisted of a questionnaire with two sections consisting of general queries (7 questions) and specific inquiries (23 items) categorized into four dimensions (product, price, place, and promotion) for the clientele. The questionnaire's validity was confirmed through face and content validation, while its reliability was assessed utilizing Cronbach’s alpha. Data analysis was conducted using SPSS25 software, encompassing both descriptive and inferential statistical analyses. The results revealed a positive and significant correlation between customers' inclination to consume organic goods and the characteristics of the product, price, and promotion. However, no association was found between the propensity to consume organic products and location characteristics. Concerning contextual variables, a solely positive and significant correlation was identified between the willingness to purchase organic items and consumer income levels. No significant relationships were detected between other contextual variables and organic product consumption. A notable contrast was observed between respondents' gender and their readiness to buy organic products, while no significant variances were noted regarding age, income, occupation, and education in relation to the propensity to purchase organic commodities.

Arabic was the language of philosophy, logic, Islamic sciences and rhetorical linguistic sciences. It was used in the writing of all sciences generally and became the language of world culture. Although the other languages of the Islamic world had a little share, but all peoples of Islamic countries; Arabs and non-Arabs, Muslims and non-Muslims attributed to that movement appreciated. Hence, Arab sciences flourished in their bright ages. Arabic language was a cultural container of the ancient Greek and Latin intellectual heritage. As the ancient Greek and Latin sciences and literatures were translated into Arabic in the bright ages of Islam. Arab language was a strong bond for them, as a common human heritage for the centuries to save it from being lost, as Muslims used it to develop their sciences and arts, as Muslims in the East used the Western sciences and literatures in the modern age, because they are not Eastern or Western, but the common efforts of all humanity. Arabic language opened for the dictionaries ​​and other tongues of cross-fertilization, civil friction and simulation. Arabic had become the language of sciences: mathematics, astronomy, engineering, logic, philosophy, mysticism, agriculture, industry and economics by the continuous efforts of scientists in their scientific research, invention, experimentation, knowledge collection and classification in various fields, where orientalists recognized the Arab leadership. That scientific and literary civilization moved to Europe through Italy, Andalusia, Crusades and the Ottoman Caliphate. Europeans learned Arabic language, literature and sciences in the centers of Toledo, Fez and cities of Maghreb.

In this work, an improved collocation method based on the Bernoulli polynomials is presented to solve the Volterra integral equation (VIE) of the second kind. The main idea of the proposed method is to improve the results of the classic Bernoulli collocation method (BCM) by dividing the interval into some sub-intervals and considering the collocation points on each of them. Here, the zeros of the shifted Chebyshev polynomials (SCPs) are considered as collocation points. Then, BCM is applied step by step from the first sub-interval to the last one. By this process, a system of algebraic equations is attained for each sub-interval that could be easily solved. Convergence of the scheme is analyzed. For the purpose of demonstrating the validity, applicability, and efficiency of the suggested scheme several numerical examples are provided. Numerical results illustrate that the accuracy of the improved Bernoulli collocation method (IBCM) is more than BCM.

This study looked into how financial knowledge and entrepreneurial proficiency affected the performance of small, sustainable businesses. In parallel, we looked at how business resilience mediated the relationship between entrepreneurial proficiency and financial knowledge and long-term company success. Using an offline questionnaire, we employed a quantitative approach to gather data from 275 Indian small company owners. PLS-SEM was used to analyse the data that had been gathered. The findings show that resilience and entrepreneurial ability are very positively impacted by financial knowledge. The business resilience and sustainable performance of Indian SMEs are significantly enhanced by entrepreneurial competencies. Moreover, it was shown that business resilience moderated the influence of financial knowledge and proficiency on sustainable performance among Indian SMEs, while concurrently having a significant impact on sustainable performance. In keeping with India Vision of Viksit Bharat@2047: Crystal Gazing Through MSME Sector, which places a strong emphasis on entrepreneurship and the growth of a financially independent entrepreneurial community, this study helps to open up business options for regional business owners who oversee small businesses. According to the most recent figures (2021–2022) from the Ministry of Statistics & Programme Implementation, MSMEs make up a startling 29.15% of India’s GDP. This indicates their critical significance in the development of the country as it equates to a sizeable portion of the economic pie. In addition to adding to the corpus of knowledge, this research can help policymakers develop relevant plans to motivate SMEs that have been most negatively impacted by the COVID-19 pandemic to operate sustainably. There are also several other ramifications for financial institutions and business owners.

Land Surface Temperature (LST) and Land Use Land Cover (LULC) are the principal aspects of climate and environment studies. The object of the study is to assess spatial relationship between LST and remote sensing LULC indices at the global and continental scale. Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua daytime LST and eight LULC MODIS indices of 2018 prepared and processed using Earth Engine Code Editor. R squared and significance of the relationship values of randomly selected points computed in R program. The research observed the relationship between examined indices and LST is significant at the 0.001 level. Normalized Difference Water Index (NDWI) and Normalized Difference Snow Index (DSI) are the dominant drivers of LST in the world, Asia and North America. In Australia and Africa, Normalized Difference Vegetation Index (NDVI) and Enhanced Vegetation Index (EVI) are the dominant drivers of LST. Albedo and Normalized Difference Soil Index (NDSI) have superior in Central America. In South America and Europe, the dominant driver of LST is NDWI. Relationship between albedo and LST is moderate inverse on a global scale. Observed relationship between LST and examined vegetation indices is positive in Europe and North America while inverse in Australia and Africa. All observed relationship between Normalized Difference Built-up Index (NDBI) and LST are positive. Association observed between NDSI and LST is positive in Australia, Africa and Central America.

The aim of this paper is to investigate the amenability modulo an ideal of Banach algebras with emphasis on applications to homological algebras. In doing so, we show that amenability modulo an ideal of A^** implies amenability modulo an ideal of A. Finally, for a large class of semigroups, we prove that l¹(S)^** is amenable modulo Iσ^** if and only if an appropriate group homomorphic image of S is finite where Iσ is the closed ideal induced by the least group congruence σ.

The rapid growth of urban areas is a major challenge facing cities around the world. This growth can have a significant impact on the local climate, leading to higher temperatures and other changes. In desert climates, the effects of urban expansion can be particularly pronounced. This study investigated the impact of urban expansion on land surface temperature (LST) in Baghdad, Iraq. Notably, this study employs a sophisticated artificial intelligence method known as Random Forest for Land Use Land Cover (LULC) classification, utilizing three Landsat images spanning the temporal spectrum from 1985 to 2021 to meticulously monitor land use transformations and associated LST variations. The results showed that vegetated areas declined by 46.8% during the study period, while built-up areas increased by 124.7%. This decline in vegetation was accompanied by an increase in LST, with bare soil recording the highest temperatures. The study also found that LST has a strong inverse relationship with vegetation and moisture. This means that areas with more vegetation and moisture tend to have lower LSTs. These findings suggest that urban expansion can lead to higher LSTs in desert climates, which can have implications for the health and wellbeing of residents. The study has important implications for urban planners and policymakers in Baghdad and other cities in desert climates. By identifying the main factors that control LST, the study provides insights into strategies for mitigating the effects of urban expansion on temperature.

Abstract This study delved into the application of various machine learning (ML) models for the classification of lung cancer levels. Through meticulous monitoring of parameters such as minimum child weight and learning rate, efforts were made to mitigate overfitting while optimizing model performance. The Deep Neural Network (DNN) emerged as a standout performer, showcasing robust performance across training, validation, and testing stages. Ensemble methods like voting and bagging also demonstrated promising results. However, Support Vector Machine (SVM) models with the Sigmoid kernel faced challenges in achieving satisfactory performance. Overall, the investigation sheds light on the efficacy of different ML models in lung cancer level classification and underscores the importance of parameter tuning to address overfitting concerns.

In response to the burgeoning global demand for premium agricultural products, particularly within the competitive nut market, this paper introduces an innovative methodology aimed at enhancing the grading process for almonds and their shells. Leveraging state-of-the-art Deep Convolutional Neural Networks (CNNs), specifically the AlmondNet-20 architecture, our study achieves exceptional accuracy exceeding 99%, facilitated by the utilization of a 20-layer CNN model. To bolster robustness in differentiating between almonds and shells, data augmentation techniques are employed, ensuring the reliability and accuracy of our classification system. Our model, meticulously trained over 1000 epochs, demonstrates remarkable performance, boasting an accuracy rate of 99% alongside a minimal loss function of 0.0567. Rigorous evaluation through test datasets further validates the efficacy of our approach, revealing impeccable precision, recall, and F1-score metrics for almond detection. Beyond its technical prowess, this advanced classification system offers tangible benefits to both industry experts and non-specialists alike, ensuring globally reliable almond classification. The application of deep learning algorithms, as showcased in our study, not only enhances grading accuracy but also presents opportunities for product patents, thereby contributing to the economic value of our nation. Through the adoption of cutting-edge technologies such as the AlmondNet-20 model, we pave the way for future advancements in agricultural product classification, ultimately enriching global trade and economic prosperity.

In this paper, the boiling flow inside a nanochannel with 700000 argon particle has been simulated by molecular dynamics (MD) simulation. This approach has been employed to analysis the superheated flow and its heat transfer pattern as well. For all simulations an external thrust force varying from 1 PN to 12 PN is exerted on inlet nanoparticles along the channel to have the forced annular boiling flow. Computations reveal that saturation condition and superheat degree have significant impacts on the liquid-vapor interface. Furthermore, because of the major influence of surface tension throughout a nanochannel, the x-velocity of liquid film and vapor core has not considerable fluctuations and stay smooth. All provided results show the behaviors completely similar to the available outcomes in the literature.

Despite the availability of COVID-19 vaccines, the global pandemic remains a significant health challenge. Timely detection of the virus is crucial for effective containment efforts, prompting the exploration of machine learning (ML) models for COVID-19 detection. highlights the ongoing significance of COVID-19 as a global health crisis despite the availability of vaccines. To address the need for timely virus detection, the study explores the efficacy of machine learning (ML) models, including DNN, Voting, Bagging, SVC_rbf, SVC_linear, SVC_polynomial, and SVC_sigmoid, in predicting COVID-19 infection probability. With a dataset comprising 4000 samples split into 3200 for training and 800 for testing, the analysis reveals that DNN and Voting models demonstrate the highest performance, achieving an impressive accuracy of 89%. These results underscore the potential of ML techniques, particularly DNN and ensemble methods like Voting, in facilitating early COVID-19 detection and contributing to effective pandemic management. The study emphasizes the importance of continued research to further refine and optimize ML-based COVID-19 detection systems.

In this project, four of fibers Bragg gratings were fabricated by injecting different volumes of liquids (star line Glass Mechanix optical adhesive material, olive oil diluted with ethanol) into the hollow core fiber. The amplitude splitting interferometric technique with a high resolution specially designed translation stage was used for the fabrication process. The fabrication was done using ultraviolet laser operated at wavelength 405nm. The fabricated Bragg length of the four fibers is equal to 3.8 cm. The results presented fiber Bragg grating (FBG) with successful fabrication at 653.3 nm Bragg reflected wavelength.

This study aims to determine the present and future scopes of the digital economy in Bangladesh to build a developed and prosperous country by 2041. Simultaneously, it analyses the components of the Digital Economy from numerous perspectives from contributing to Bangladeshi economy with an adaptation of the 4th Industrial Revolution and emerging technologies. In the methodology section, qualitative approach is conducted to determine the research objectives where secondary data is used. Around 100 papers are collected and 51 articles are used for conducting this study. The findings of the study are to present the current state of the digital economy which is developing trends that contribute to national GDP for the adaptation of the 4IR for the transformation of smart Bangladesh. From the conceptual implication, companies and individuals are aware of the digital economy, which would lessen digital divide and create a strong link between technology and the economy. Furthermore, establishing customer confidence and trust would be a big issue for Bangladesh's digital platform economy in the future days. From a practical standpoint, IT industries and commercial organizations would have to deal with emerging 4IR and its technologies. The job market would also be expanded in a variety of areas, which would ultimately benefit the national economy. According to the study's conclusions, the digital economy is predicted to expand its commercial and corporate opportunities. Future research might be extended based on qualitative approach towards a digital Bangladesh and create a better developing economy.

Despite the effectiveness of insulin injections in managing hyperglycemia in Type 1 Diabetes, they fall short in addressing autoimmunity and regenerating damaged islets. This review aims to explore the potential of various treatment modalities for T1DM, including mesenchymal stem cells (MSCs), MSC-derived exosomes, gene therapy, islet allotransplantation, and pancreatic islet cell transplantation. Results: MSCs demonstrate efficacy in T1DM treatment through immunomodulation and tissue regeneration, although further research is warranted to optimize their therapeutic potential. Gene therapy presents a promising approach despite challenges such as donor shortage and immune rejection. Pancreatic islet cell transplantation emerges as a viable option, albeit with associated risks including graft rejection and the need for immunosuppression. Teplizumab, an FDA-approved humanized monoclonal antibody, revolutionizes the treatment landscape of Type 1 Diabetes by significantly delaying its onset, offering a paradigm shift since the discovery of insulin Conclusion: Ongoing studies and technological advancements in T1DM management offer a promising outlook for improved treatments and possibly even eradication on a global scale. MSCs, MSC-derived exosomes, gene therapy, and pancreatic islet transplantation hold considerable potential.

This paper critically reviews the correlation between the built environment and sociology as it pertains to residential segregation and social housing policy in Iran. The objective is to identify design strategies that minimize the risk of social isolation, promote social interaction, and foster a sense of community within affordable housing zones. The literature review includes existing research on urban segregation and social sustainability, with a focus on architectural solutions. Case studies are utilized to exemplify both positive and negative social outcomes related to urban segregation and identify effective design elements. The findings highlight the complex nature of residential segregation and its impact on social isolation, social capital, and social exclusion. The built environment contributes to the problem by facilitating the creation of isolated communities, and architects have a crucial role in addressing them. The results suggest that a comprehensive social housing policy is necessary to improve the quality of social housing and reduce residential segregation in Iran. Finally, the paper provides practical design strategies to promote social interaction, enhance accessibility and mobility, create mixed-use developments, and incorporate sustainable design features in social housing policy. By using design strategies that support social sustainability and inclusiveness, architects can create thriving and sustainable urban environments that prioritize the needs of marginalized communities.

One of the most destructive natural disasters is the earthquake which brings enormous risks to humankind. The objective of the current study was to determine the Earthquake’s remote sensing multiparameter (i.e. land surface temperature (LST), air temperature, specific humidity, precipitation and wind speed) spatiotemporal anomaly of many earthquake samples occurred during 2018 around the world. In this research 11 earthquake (M > 6:0) studied (4 samples selected in a land with transparent sky situations, 3 samples in land within cloudy situations and 4 samples in marine earthquakes). The interquartile range (IQR) and mean ± 2σ methods utilized to improve the efficiency of anomalous differences. As a result, based on the IQR method, negative anomaly before the event detected during the daytime in Mexico and during the nighttime in Afghanistan. In addition, a negative outlier of brightness temperature (BT) detected in Alaska before, after and during the event. In contrast, based on IQR and mean ± 2σ positive anomaly detected in precipitation before and after the event in all investigated examples. According to mean ± 2σ, negative anomaly LST, specific humidity, sea surface temperature (SST_100) and wind detected in most examined earthquake samples. In contrast, positive SST_0 anomaly observed in Fiji and Honduras after the earthquake. Our results suggested in marine earthquakes, for earthquake forecasting we can merge a prior negative anomaly in the wind speed and SST_100. Regarding the in land cloudy sky earthquakes, merging anomaly parameters could be the negative prior anomaly in BT, skin temperature, in contrast, a positive anomaly in precipitation. In land transparent sky earthquake, usually negative prior anomalies in air temperature, specific humidity and LST.

Remote sensing data and techniques utilized for various purposes including natural disasters such as earthquake as well as flood. The research aims to consume liberates Landsat 8 images for investigating crashed airplanes such as MH370. Overall approximately 300 Landsat images with less than 10% clouds utilized in addition processed through Google Engine Platform. Due to the materials as well as the color of airplane body different from the area which is a plane crashed there, moreover, it should be the characteristics of the plane shapefile different in terms of albedo, temperature as well as vegetation index value. The research observed Landsat 8 data as well as methods utilized in this research, especially, NDVI, albedo in addition to band 4, capable to distinguish between the plane and its surrounding green area. Therefore, our result confirms during the research period, there was no plane on the location as well as MH370 not crashed in this site.

The authors developed a wealth curve (bell curve) that can predict a group of individuals’ wealth based on the composite intelligence score which is calculated based on the sum of the intelligence quotient and emotional awareness score. The intelligence quotient was defined as one's ability to perform, comprehend and learn, and emotional awareness was defined as the emotional ability to recognize and make sense of emotions. To move towards the right on the X-axis of the Kabir wealth curve (e.g., accumulate more wealth), individuals must improve emotional awareness and choose a professional career path that lands higher income, calculated risk-taking, and being connected with individuals that can lead to financial deals. Similarly, those facing social injustice can accumulate more wealth by improving emotional awareness, which will help them navigate challenging environments.

Accurate classification of objects in 3D point clouds is a significant problem in several applications, such as autonomous navigation and augmented/virtual reality scenarios, which has become a research hot spot. In this paper, we presented a deep learning strategy for 3D object classification in augmented reality. The proposed approach is a combination of the GRU and LSTM. LSTM networks learn longer dependencies well, but due to the number of gates, it takes longer to train; on the other hand, GRU networks have a weaker performance than LSTM, but their training speed is much higher than GRU, which is The speed is due to its fewer gates. The proposed approach used the combination of speed and accuracy of these two networks. The proposed approach achieved an accuracy of 0.99 in the 4,499,0641 points dataset, which includes eight classes (unlabeled, man-made terrain, natural terrain, high vegetation, low vegetation, buildings, hardscape, scanning artifacts, cars). Meanwhile, the traditional machine learning approaches could achieve a maximum accuracy of 0.9489 in the best case.

This critical study examines the social consequences of neoliberal urbanism, with a focus on housing policies by implementing qualitative approach. The main goal of the study is to identify downsides of the neoliberalism in residential areas and shed light on the potential social challenges caused by this. After reviewing the existing literature in this field and introducing some cases, the findings highlight that the prioritization of market mechanisms in urban development, which is the key characteristic of neoliberalism, has led to unaffordable housing, gentrification, and displacement of marginalized communities, exacerbating socio-economic inequalities. The commodification of housing under neoliberal urbanism has transformed homes into financial assets, and instead of addressing the structural roots of housing insecurity, strategies such as implementing public-private partnerships (PPPs), urban mega projects and deregulation, have perpetuated housing crises in urban areas. The results suggest that alternative methods such as inclusionary zones for having a mix of market-rate and affordable housing in new developments, as well as strengthening tenant protections through rent control, and tenant rights advocacy programs, can remarkably help address systemic inequalities. By prioritizing the needs of vulnerable populations, policymakers can work towards mitigating the detrimental social effects of neoliberal urbanism and fostering more just and inclusive urban environments. Finally, critical engagement with social justice issues is essential to creating diverse and inclusive urban communities.

The literature study delves into novel therapeutic strategies in transplantation medicine, highlighting unique approaches that could revolutionize current practices. It emphasizes novel patterns that have the potential to transform the current landscape. Commencing with a thorough examination of the historical environment, it traces crucial advances and changes in transplantation. The focus is on traditional techniques, emphasizing their limitations and challenges. An extensive examination of contemporary transplantation therapies offers valuable insights into the most recent progress in organ, cellular, and tissue transplantation. This analysis examines the immunological obstacles and outlines the current advancements and constraints. The exploration further navigates into novel models and concepts such as immunomodulation, developments in organ preservation techniques, gene editing, biomaterials, scaffold-based solutions, and the integration of precision medicine, artificial intelligence, and machine learning applications. Each section analyzes the potential for change and current progress in various areas, backed by relevant scientific sources up to 2023. The subsequent sections delve into innovative cellular therapies, biotechnological progress, current clinical trials, and case studies demonstrating effective applications. This examination delves into the ethical and regulatory considerations of innovative therapeutic procedures, emphasizing ethical implications, regulatory frameworks, and the importance of balancing innovation with patient welfare. The literature review concludes by offering a forward-looking perspective, emphasizing potential progress, anticipated challenges, and advocating for collaboration and interdisciplinary approaches to overcome limitations in the field of transplantation medicine.

This paper explores the concept of feminist architecture and its potential to challenge gender norms and stereotypes in urban design. Women face specific challenges in urban spaces, including safety concerns, lack of accessibility, and discrimination. Feminist architecture offers a potential solution to these challenges by providing a framework that prioritizes the needs and experiences of marginalized groups, including women. The study employs a mixed-methods approach to conduct a review of relevant literature, case studies, and examples of feminist architecture from around the world to address research questions related to barriers and benefits of implementing feminist architecture in mainstream design practices. After identifying obstacles, this paper offers concrete strategies to overcome these barriers and the findings suggest that by prioritizing inclusivity, accessibility, sustainability, and democracy, feminist architecture principles offer a framework for designing urban environments that are just, equitable, and empowering for all individuals. However, despite the potential gains of incorporating feminist architecture into the design process, there are several barriers and limitations that designers may face. Therefore, to overcome these barriers and limitations, implementing feminist architecture principles require a commitment to understanding how gender operates in society, financial support, policy advocacy, and collaborative approaches among designers. By creating inclusive, gender-neutral, and supportive spaces and promoting diversity and inclusion within learning and practice, feminist architecture has the capacity to transform the built environment and make it more inclusive, equitable, and just for everyone.

This research investigated the antihypertensive effects of tamarind products and compared their potentials based on their animal model’s data verified by molecular docking, multitarget interactions in network pharmacology, and dynamic simulation assays. The GC-MS characterized tamarind products were administered to the cholesterol-induced hypertensive Wistar albino rat models. Two-week-intervened animals were dissected to collect serum and organs which were respectively subjected to the analyses of hypertension-linked markers and tissue architectures. Lead biometabolites of tamarinds interacted with eight target receptors in molecular docking and dynamic simulation studies and they were tested for multitarget interactions using network pharmacological analyses. Results showed that serum alanine aminotransferase (ALT), aspartate aminotransferase (AST), alkaline phosphatase (ALP), C-reactive protein (CRP), Troponin I, and lipid profiles were maximally reinstated by the phenolic-enriched ripened sour over the sweet tamarind flesh extracts, but seed extracts had a smaller influence. Among the tamarind’s biometabolites, Gamma-sitosterol (ϒ-sitosterol) was found to be the best ligand in managing hypertension via the possible ligand-receptor interactions with the guanylate cyclase which displayed the best drug-likeliness through the highest binding energy -9.3 Kcal. Multitargeted interactions-based degree algorithm and phylogenetic tree of pathways showed 14 targeted genes, of which NR3C1, REN, PPARG, and CYP11B1 hub genes, were consistently modulated by the ϒ-sitosterol to reduce hypertension and related risk factors. The dynamic simulation study showed that the P-RMSD values of ϒ-sitosterol-guanylate cyclase were stable between 75.00 to 100.00 ns at the binding pocket. The findings demonstrate that ripened sour tamarind extract may be supplemented to be a more prospective antihypertensive target or nutraceuticals affirming through advanced preclinical and clinical studies.

This paper provides an overview of current literature on community-led development initiatives in urban contexts, their role in addressing urban inequality, and the challenges they face. This study examines effective strategies of community-led initiatives, such as empowering communities, building partnerships, mobilizing resources, focusing on local needs, and participatory design methods. Case studies from around the world demonstrate how successful community-led development initiatives have been able to overcome obstacles to create more inclusive and equitable urban environments. Institutional support, including technical assistance, capacity building, and regulatory frameworks, are crucial for promoting the success and sustainability of these initiatives. Challenges to community-led initiatives include limited resources, capacity building needs, inadequate infrastructure, lack of institutional support, and lack of trust among community members. Therefore, the paper suggests that it is essential to address these challenges to enable the success of community-led development initiatives. Furthermore, this study recommends that future research should explore how emerging technologies and innovative approaches can effectively support community-led development initiatives and advance more just and sustainable urban development.

Demand for environmentally friendly types of energy is growing all over the world, which naturally increases the intensity of work on the production of hydrogen-containing fuel mixtures. Steam reforming of methanol is one of the most effective areas of research, as it is a process with low energy consumption. The results of steam reforming of methanol on the catalysts prepared by solution combustion synthesis (SCS) and impregnation by moisture capacity are presented. Investigation of the activity of Cu-Ce-Al catalysts of different composition was carried out for production of hydrogen and comparison of SCS with traditional impregnation method. Methanol conversion reaches 99%, while the selectivity of H2 was 88%, at 500 °C. It was found that CuAl2O4 spinel formation is due to substitution of Al3+ with Cu2+ Ce3+ cations. A consequence CuAl2O4 and CeAlO3 lattice parameters increase because of difference in ionic radius of Al3+ (0.53 Å) and Cu2+ (0.73 Å), Ce3+ (1.07 Å). Advantages of SCS catalysts in steam reforming of methanol were shown. The aim of this research is to develop a new catalyst for conversion of methanol into hydrogen containing fuel mixtures, which will further promote the organization of a new era of environmentally friendly energy-saving production methods.

In this study, the olive pomace was considered because of its importance in the environment. So, this study carried out to estimate the total nitrogen content and the fatty acids profile of olive pomace. The olive pomace samples were collected from Irbid, Jarash, Ajloun and Mafraq during the harvesting season 2014 to study the biochemical characteristics of fatty acid composition and the total nitrogen (TN) content. The total nitrogen content was determined by standard Kjeldahl method and the fatty acid profile was detected by gas chromatography (GC). The results show that the total nitrogen content ranged from (0.39 ± 0.0) to (0.62 ± 0.02) with statistically significant difference suggesting that the composition of matrices and their percentage may be responsible for composition of amendments. The calculated total protein percentage ranged between (2.43 ± 0.00) to (3.87 ± 0.17). Also, 13 different fatty acids were quantitatively profiled and quantitated. Oleic acid (C 18:1) was found to be the highest percentage of all other fatty acids and ranged between (59.03%) and (63.81%), moreover the C 18:1/C 18:2 (oil quality) was calculated and C.V% showed variation meaning that nutritional implication could affect the oxidative stability of oils. In conclusion, OP by-product could give a sustainable and alternative-cheap source for fertilizers, pharmaceutical industries, cosmetics and other industries.

The proliferation of SARS-COV-2 through enhanced viral replication and its subsequent triggering of cytokine storm, are some of the hallmark phenotypes in severe COVID-19 patient cases. Cyclosporine, an immunosuppressant drug and Selinexor, an inhibitor of nuclear transporter protein, both have been successfully demonstrated to be effective against SARS-COV-2 infection by targeting those functions individually. However, the highly multifactorial pathology of SARS-COV-2 infection hinders any mono-therapeutic strategy to become an optimal option. In this study, we assess the potential efficacy of the Cyclosporine-Selinexor combination on an integrated interactome by adopting a network-medicine-based repositioning technique, where disease proximity, functional proximity and their topological separation are evaluated, followed by a robust statistical significance test. Results have shown that both drug target modules are highly proximal to the SARS-COV-2 disease modules in terms of network topology and functional associations, in a statistically significant manner, individually. Functional enrichment of both drug modules and SARS-COV-2 infected modules has shown that two drugs target the functions related to viral replication and cytokine storm during infection. Moreover, a high degree of network separation been those two drug target modules has been observed, revealing ``complementary exposure`` patterns, rendering this drug combination as an effective one against SARS-COV-2 infection. We hope that our results will encourage researchers to further investigate the potency of Cyclosporine and Selinexor combination in vivo or in vitro, and ultimately lead that up to clinical trials to treat SARS-COV-2 patients.

The variability of ozone over Egypt has been studied in this work. Higher values of coefficient of variation (COV) at eight stations occur at winter while lowest values occur at summer. The COV is function of latitude in annual, winter and spring where it decreases gradually from the north to south of Egypt. The trend analysis of ozone over the eight stations indicates negative trends over northern stations for both annual and seasonal time series with the greatest one at winter. The horizontal distribution of ozone trend values is negative over all Egypt in winter while it positive over middle and south Egypt in the other seasons. The long-term variability of the behavior of the annual ozone shows positive trend values in ozone are the dominant features during the period 1979- 1989 at the most stations. Negative trend values in ozone are the dominant features during the period 1990- 2014 at all stations. The Mann–Kendall test confirms that there is an abrupt change towards decreasing of ozone occurs in 1981, 1984, 2012, 1999, 2000, 1998 and 2010, while a change towards increasing of ozone appears in 2006, 2014, 1993 and 1989.

A well-known result of Posner’s second theorem states that if the commutator of each element in a prime ring and its image under a nonzero derivation is central, then the ring is commutative. In the present paper, we extend this bluestocking theorem to an arbitrary ring with involution involving prime ideals. Further, apart from proving several other interesting and exciting results, we establish *-version of Vukman’s theorem [48, Theorem 1]. Precisely, we describe the structure of quotient ring A/L, where A is an arbitrary ring and L is a prime ideal of A. Further, by taking advantage of the *-version of Vukman’s theorem, we show that if a 2-trosion free semiprime ring A with involution admits a nonzero *-centralizing derivation, then A contains a nonzero central ideal. This result is in a spirit of the classical result due to Bell and Martindale [19, Theorem 3]. As the applications, we extends and unify several classical theorems proved in [6],[25,[42], and [48] . Finally, we conclude our paper with a direction for further research.

In recent years, extensive research has been conducted on the IoT, one of its challenges has been the field security and penetration in these networks. security solutions it Require more planning and awareness to ensure system security and privacy protection.it has also been shown that adjusting the weights of neural networks can help improve the accuracy of detection to what extent. the challenge in the attack detection field is to increase the accuracy of attack detection by machine learning methods, in this paper, a new method is presented to adjust weights of the random neural network for attack detection. Evaluations of the proposed method show that compared to random neural network methods, nearest neighbor, and support vector machine, the accuracy of attack detection improves up to 99.49 percent, and the random neural network method has been able to improve by 99.01 percent, placing the best methods together in these experiments in the form of a multi-learning model showed that the results also had an increase in accuracy up to 99.56 percent, while the training time in the proposed model is less compared to the random neural network method.

Background: Asthma is a widespread chronic respiratory disease that poses a significant public health challenge. The current study investigated the associations between air pollution and asthma severity among individuals residing near the Sohar industrial port (SIP) in Oman. Despite the presence of multiple major industrial complexes in Oman, limited knowledge regarding their impact on respiratory health is accredited. Hence, the primary objective of this study is to offer valuable insights into the respiratory health consequences of industrial air pollution in Al Batinah North. Methods: The state health clinics' records for patient visits related to asthma were collected for the timeframe spanning 2014 to 2022. Exposure was defined as the distance from SIP, Majan Industerial Area (MIA) and Sohar Industerial Zone (SIZ) to determine high, intermediate, and low exposure zones (12 km, respectively). Exposure effect modifications by age, gender, and smoking status were also examined. Results: The conducted cross-sectional study of 410 patients (46.1% males and 53.9% females) living in over 17 areas around SIP revealed that 73.2% of asthmatics were under 50 years old, with severity significantly associated with closeness to the port. Risk ratios were estimated to be (RR:2.42; CI95%: 1.01–5.78), (RR:1.91; CI95%: 1.01–3.6), and (RR:1.68; CI95%: 0.92–3.09) for SIP, MIP and SIZ areas, respectively, compared to the control area. Falaj Al Qabail (6.4 km) and Majees (6 km) had the highest number of asthma patients (N. 69 and N. 72), and highest percentages of severe asthma cases among these patients (28% and 24%) with significant risk ratios (RR:2.97; CI95%: 1.19–7.45 and RR:2.55; CI95%: 1.00–6.48), correspondingly. Moreover, severe asthma prevalence peaked in the 25-50 age group (RR:2.05; CI95%: 1.26–3.33), and this linkage between asthma and age was much more pronounced in males than females. Smoking and exposure to certain contaminant (dust and smoke) increased also the risk of severe asthma symptoms, but their effects were less important in the high risk zone, suggesting much more important risk factor. A neural network model accurately predicted asthma risk (94.8% accuracy), with proximity to Sohar Industrial Port as the most influential predictor. Conclusion: The study highlights the High asthma burden near Sohar Industrial Port, linked to port proximity and smoking and wind direction as major risk factors. These findings inform vital public health policies to reduce air pollution and improve respiratory health in the region, prompting national policy review.

The purpose of this study is to examine the cognitive processes underlying the listening comprehension section of IELTS and to investigate if they vary in terms of difficulty. For this purpose, a checklist of possible cognitive operations was prepared based on the literature and the candidates’ feedback. The checklist consisted of six cognitive operations. A sample of IELTS listening test was given to 310 upper intermediate and advanced students of English. Linear logistic test model was employed to analyse the data. Findings showed that keeping up with the pace of the speaker and understanding reduced forms were the most difficult operations for the listeners. Altogether, the six operations explained 72% of the variance in item difficulty estimates. Implications of the study for the testing and teaching of listening comprehension are discussed.

The increase in population and the challenges caused by it are always among the concerns of decision-makers and policymakers in large countries. One of the most serious concerns is in the field of energy consumption. Optimizing energy use is one of the most effective ways to manage limited resources and energy. Energy consumption in residential houses constitutes a significant percentage of the total energy consumption worldwide; therefore, current research focusing on mathematical models aims to provide a predictive multi-objective linear mathematical model for residential house consumption. For this purpose, the consumption of water, electricity, and gas for 80 residential houses, including 10 household appliances and equipment on a weekly basis, has been considered. The results showed that the mixed-integer multi-objective predictor model is able to optimize household consumption plans compared to the actual state of household energy consumption. Since the goals of household satisfaction and energy consumption costs in the model conflict with each other, the influence coefficient was calculated to demonstrate the simultaneous achievement of these goals. The optimal value achievable with the default model for the model's purposes is 69%.

One of the factors in the mobility of a nation's economy is the stock exchange which plays a decisive role in sustainable economic development. Accordingly, and for the special place of the stock exchange in the economy, we decided to investigate the relationship between the interest and exchange rates and the Tehran stock exchange dividend and price index (TEDPIX). Using the autoregressive distributed lag method, the present study is conducted utilizing the annual data over the period of 1991 to 2020. The results indicate that the exchange rate has a positive long-run relationship with the TEDPIX, but no statistically significant relationship was found between the TEDPIX and the interest rate. Furthermore, the results of the estimation of the error correction model show that 30.786% of the disequilibrium in each period is adjusted to the long-run equilibrium.

Money demand is the amount of real money balance with people and they can decide at any time what part of their assets to keep in cash. In this study, money was assumed to be a durable good that leads to the flow of some kind of service. Therefore, money became a function of utility. Using AIDS elasticity demand function, income, price and cross elasticities were evaluated. The statistics of this study are related to the years 2003-2022. The results showed that, based on the assumption of three goods, the demand includes bills and negotiable instruments, demand deposits, and time deposits. Based on the limitation of symmetry, collectability and homogeneity, the tensions can be calculated. The results showed that the price elasticity of demand for banknotes and muskox with term deposits is not significant. On the other hand, the cross tension between sight deposits and term deposits is negative and significant.

Silicon carbide particle-reinforced aluminum matrix (SiCp/Al) composites are significant lightweight metal matrix composites extensively utilized in precision instruments and aerospace sectors. Nevertheless, the inclusion of rigid SiC particles exacerbates tool wear in mechanical machining, resulting in a decline in the quality of surface finish. This work undertakes a comprehensive investigation into the problem of tool wear in SiCp/Al composite materials throughout the machining process. Initially, a comprehensive investigation was conducted to analyze the effects of cutting velocity vc, feed per tooth fz, milling depth ap, and milling width ae on tool wear during high-speed milling under SCCO2-MQL (Supercritical Carbon Dioxide Minimum Quantity Lubrication) ultrasonic vibration conditions. Furthermore, a prediction model for tool wear was developed by employing the orthogonal test method and multiple linear regression. The model's relevance and accuracy were confirmed using F-tests and t-tests. Ultimately, through the utilization of a genetic algorithm, the milling parameters were optimized, resulting in the identification of the most optimal combination of parameters. Empirical findings suggest that the careful selection of milling parameters can significantly mitigate tool wear, extend the lifespan of the tool, and enhance the quality of the surface. This work serves as a significant point of reference for the processing of SiCp/Al composite materials.

General phytochemical screening of the aerial parts of Consolida orientalis revealed the presence of steroids, terpenes, phenolic compounds, saponins, fatty acids, alkaloids. This study was conducted to investigate the bioactivities of extracts, isolation and identification the compounds from aerial parts of C.orientalis. The main goal of the present study is identifying and characterizing the antioxidant activity of the Consolida orientalis and biological isolation of active terpenoid. Aerial parts of the plant were dried at room temperature and reduced to small pieces, followed by using extraction with ethyl acetate percolation. Tree complementary analysis system was used, DPPH free radical scavenging test, total phenolic metabolites and FRAP. The total phenolic content was 38.83±2.09 mg gallic acid corresponding to g-1 extract with regarding to standard curve (y=0.0054x+0.0488, r2=0.995). IC50 value for DPPH radical – scavenging was 987.11±28.66 mgml-1. The extract was exhibited a medium reducing power compared with Vit C. The isolation and purification was afforded white crystalline powder which was subjected to physical, chemical and spectral identification by IR, ¹H- and ¹³C- NMR and GC-MS. Isolated compound was identified as β-sitosterol. That is a terpenoid with melting point 133.4-134.5 ͦ c and with molecular formula C₂₉H₅₀O.

In this paper, a new approach to the sliding-mode control of single-phase inverters under linear and non-linear loads is introduced. The main idea behind this approach is to utilize a non-linear, flexible and multi-slope function in controller structure. This non-linear function makes the controller possible to control the inverter by a non-linear multi-slope sliding surface. In general, this sliding surface has two parts with different slopes in each part and the flexibility of the sliding surface makes the multi-slope sliding-mode controller (MSSMC) possible to reduce the total harmonic distortion, to improve the tracking accuracy, and to prevent overshoots leading to undesirable transient-states in output voltage which are occurred when the load current sharply rises. In order to improve the tracking accuracy and to reduce the steady-state error, an integral term of the multi-slope function is also added to the sliding surface. The improved performance of the proposed controller is confirmed by simulations and finally, the results of the proposed approach are compared with a conventional SMC and a SRFPI controller.

κ Draconis is a binary system with a classical Be star as the primary component. Its emission-line spectrum consists of hydrogen lines, notably the Hα line with a peak intensity ratio (V/R) variations phase-locked with the orbital period P = 61.55 days. Among binaries demonstrating the Be phenomenon, κ Dra stands out as one of a few systems with a discernible mass of its secondary component. Based on more than 200 spectra obtained in 2014 − 2023, we verified the physical parameters and constructed the mass function. We used part of these data obtained in 2014 − 2021 to investigate regions in the circumstellar disk of the primary component that emit the Hα line using the Doppler tomography method. The results show that the disk has a non-uniform density distribution with a prominent enhancement at Vy≈ 99 km s−1 and Vx≈−6 km s−1 that corresponds to a cloud-like source of the double-peaked Hα line profile. We argue that this enhancement’s motion is responsible for the periodic variations of the Hα V/R ratio, which is synchronised in orbital phase with the radial velocity (RV) of absorption lines from the atmosphere of the primary component.

Urban environments play a crucial role in shaping the lived experiences of women, yet traditional urban design practices often neglect the diverse needs and identities of women, perpetuating social barriers and gender inequalities. This review paper seeks to explore the existing research on how urban design influences women's social challenges in cities. By synthesizing literature from urban planning, architecture, gender studies, and sociology, this review provides a comprehensive overview of the impact of urban design on women's experiences and opportunities in urban spaces. The review highlights gender disparities in urban design, inclusivity in urban planning, and the need for gender-sensitive approaches to address these disparities. Key scholars, including Susan S. Fainstein, Leslie Kern, Sharon Zukin, Daphne Spain, and Vandana Shiva, have contributed significantly to understanding gender disparities in urban spaces and advocating for more inclusive and equitable urban environments. The discussion emphasizes the importance of community engagement, participatory planning processes, and an intersectional lens in urban design to ensure that women's voices and needs are effectively incorporated into decision-making processes. Future research directions include exploring the role of technology, smart city initiatives, and addressing the impacts of gentrification and urban redevelopment on women's access to housing and resources. By advancing research on gender equity in city planning, we can work towards creating more inclusive, equitable, and sustainable urban environments that benefit all residents.

Social network analysis is an essential means to uncover and examine infectious contact relations between individuals. This paper aims to investigate the spread of coronavirus disease (COVID-19) from international to the national level and find a few super spreaders which played a central role in the transmission of disease in India. Our network metrics calculated from 30 January to 6 April 2020 revealed that the maximum numbers of connections were established from Dubai (degree-144) and UK (degree-64). These two countries played a crucial role in diffusing the disease in Indian states. The eigenvector centrality of Dubai is found to be the highest, and this marked it the most influential node. However, based on the modularity class, we found that the different clusters were formed across Indian states which demonstrated the forming of a multi-layered social network structure.A significant increase in the confirmed cases was reported during the first lockdown 1.0 (22 March 2020) primarily attributed to a gathering in Delhi Religious Conference (DRC) known as Tabliqui Jamaat. As of 6 April 2020, the overall structure of the network has encompassed local transmission, and it was significantly seen in the states like Gujarat, Rajasthan, and Karnataka. An important conclusion drawn from the presented social network reveals that the COVID-19 spread till 6 April was mainly due to the local transmission across Indian states. The timely quarantine of infected cases in DRC has not led it to spread at the level of community transmission.

The very first case of corona-virus illness was recorded on 30 January 2020, in India and the number of infected cases, including the death toll, continues to rise. In this paper, we present short-term forecasts of COVID-19 for 28 Indian states and five union territories using real-time data from 30 January to 20May 2020. Applying Holt’s second-order exponential smoothing method and autoregressive integrated moving average (ARIMA) model, we generated 10-day ahead forecasts of the likely number of infected cases and deaths in India until 29 May2020. Our results show that the number of cumulative cases in India will rise to169109 [PI 95% (14426, 19455)], concurrently the number of deaths may increase to 4863 [PI 95% (4221, 5551)] by 29 May 2020.Further, we have marked the states (e.g. Delhi, Uttar Pradesh, Rajasthan, Madhya Pradesh, Maharashtra, Gujarat, and Tamil Nadu) where outburst is expected by considering the cases above three standard deviations. Under the worst-case scenario, Maharashtra is likely to be the most affected state with around 62628 [PI 95% (52840, 73555)] cumulative cases by 29 May 2020. However, Kerala and Karnataka are likely to remain in the lesser affected region. The presented results mark the states where lockdown by 1 June2020, can be loosened.

Droughts are a common occurrence in various climates and are primarily caused by a prolonged decrease in rainfall. Several factors contribute to droughts, including temperature, wind speed, relative humidity, rainfall timing, amount, and intensity during the growing season. The objective of this study is to establish a new index, named soil moisture and evapotranspiration revealed drought index (SERDI), for displaying dry and wet conditions based on combining both soil moisture and evapotranspiration (Penman-Monteith) to improve drought early warning and its severity globally. For validation of the SERDI with other indices such as LST, VHI, NDVI, and NDWI, different ways used such as R-square, RMSE, MAPE, and P-value to estimate the accuracy, variability of data, the forecast conditions, and how the significance of data. The results showed that the low RMSE and high r² were found between SERDI with LST and VHI. In contrast, the low R- square and high RMSE were between SERDI with NDVI and NDWI in most of the semi-arid areas. Furthermore, most of the semi-arid areas from Iran, Iraq, Syria, Jordan, and Israel experienced moderate and severe dry conditions, except some parts of these regions had normal conditions in Iran and Syria. The SERDI analysis revealed a strong correlation between (LST) and a moderate correlation with (VHI) across all study areas. However, the relationship between other indices, like (NDWI) and (NDVI), varied depending on the regions. To conclude, SERDI can be used globally for detecting drought based on soil moisture and evapotranspiration.

Observing cultivated crops and other forms of land use is an important environmental and economic concern for agricultural land management and crop classification. Crop categorization offers significant crop management data, ensuring food security, and developing agricultural policies. Remote sensing data, especially publicly available Sentinel 1 and 2 data, has effectively been used in crop mapping and classification in cloudy places because of their high spatial and temporal resolution. This study aimed to improve crop type classification by combining Sentinel-1 (Synthetic Aperture Rader (SAR)) data and the Sentinel-2 Multispectral Instrument (MSI) data. In the study, Random Forest (RF) and Classification and Regression Trees (CART) classier were used to classify grain crops (Barley and Wheat). The classification results based on the combination of Sentinel-2 and Sentinel-1 data indicated an overall accuracy (OA) of 93 % and a kappa coefficient (K) of 0.896 for RF and (89.15%, 0.84) for the CART classifier. It is suggested to employ a mix of radar and optical data to attain the highest level of classification accuracy since doing so improves the likelihood that the details will be observed in comparison to the single-sensor classification technique and yields more accurate results.

In the era of mounting water scarcity, particularly in arid regions, the agricultural sector is striving to optimize the water resource management practices. Treated wastewater (TWW) has emerged as a viable alternative to freshwater for irrigation, offering a sustainable solution to water conservation. However, ensuring the safety and quality of TWW is paramount to safeguard for both crop health and environmental integrity. Electrical conductivity (EC), a critical factor in assessing TWW suitability for irrigation, can significantly impact crop yields and soil health since it is directly linked to the concentration of dissolved salts and ions. Therefore, this study delves into the development of advanced predictive models for EC assessment by employing supervised machine learning (ML) techniques like the Support Vector Regression (SVR), Adaptive Network-based Fuzzy Inference System (ANFIS), and Multiple Linear Regression (MLR). The TWW samples collected from Al-Qatif area, Saudi Arabia were assessed in the lab through a sensor-based real-time monitoring system integrated with Internet of Things (IoT) network and a multiprobe device. The key water quality parameters assessed involved, temperature (T), pH, Oxidation Reduction Potential (ORP), Resistivity (RES), Total Dissolved Solids (TDS), Salinity and Turbidity which served as the foundation for these models, given their profound influence on and their anticipated impact on EC levels. Following feature selection, two distinct model combinations were identified for the SVR, ANFIS and MLR models. Furthermore, to evaluate prediction performance, four statistical criteria, including coefficient of determination (R²), correlation coefficient (R), mean square error (MSE), and root mean square error (RMSE), were employed. Overall, the comparative performance results proved that ANFIS-M2 indicated the strongest predictive capability with the R² value of 0.99572 and 0.75145 and the RMSE values of 0.00965 and 0.01134, respectively in both calibration and verification stages.

Background: Despite their generally favorable prognosis, hepatic fibrosis remains a possible complication for hepatitis B virus (HBV) inactive carriers. This study aimed to estimate the prevalence of significant fibrosis and associated risk factors among Omani HBV inactive carriers. Methods: A retrospective study was conducted of 200 Omani HBV inactive carriers visiting a tertiary hospital in Muscat, Oman, between January 2017 and December 2018. Significant fibrosis (stage F2 or higher) was identified using two-dimensional shear-wave elastography. Baseline clinical, laboratory, and radiological data were analyzed to determine associations. Results: Of the total sample, 106 patients (53%) were male, and the mean age was 44.6 ± 9.3 years. The prevalence of significant fibrosis was 20% (n = 40). Male gender (p = 0.007), age ≥60 years (p = 0.024), and fatty changes in liver ultrasound (p = 0.044) were found to be independent factors for significant fibrosis. Conclusion: the prevalence of significant fibrosis was relatively high among a sample of Omani HBV inactive carriers, with several sociodemographic and clinical risk factors identified. Periodic assessment of liver function is needed for patients with these risk factors; moreover, routine biochemical parameters could be useful predictors of disease prognosis. Further research is recommended to substantiate these findings.

Drought is considered one of the severest natural disasters and it is difficult to predict it. This review article aimed to display the state of the art of methods used to predict and monitor types of droughts. We examine more than 30 indices and models to identify the strengths and weaknesses of methods and identify gaps remaining in this field. Examples of examined indies are Palmer Drought Severity Index (PDSI), Standardized Precipitation Index (SPI), and Standardized Precipitation Evapotranspiration Index (SPEI). The research found improvement in drought modeling, however, more focus and improvement are required to monitor and predict drought types. It also found that some methods outperform others such as PDSI, SPI, SPEI, EVI, NDVI, NDWI, VCI and TCI.

This study aimed to investigate the fatigue performance and interfacial strengthening mechanisms of Al6061-to-Cu dissimilar lap joints via electromagnetic pulse welding (EMPW). The load-bearing capacity of the joints at discharge voltages of 14 kV and 16 kV was superior to that of 12 kV. Furthermore, the fatigue life of the 14 kV joints was one order of magnitude higher compared to the 12 kV joints. SEM observation of the fatigue fracture surface revealed the presence of typical "tire-mark" fatigue striations only in the 14 kV joint, indicating higher ductility and the ability to withstand extended plastic deformation. Notably, ultra-fine nanocrystalline Al2Cu phase, amorphous phase, and numerous dislocations hindered EBSD acquisition in the transition zone. Nevertheless, dense low-angle grain boundaries (LAGBs) and refined grains were examined at the bonding interface. This suggests that the high-velocity collision caused severe plastic deformation and led to the formation of substructures. The interfacial strength was attributed not only to the "wave-like" or "inverted hook-like" diffusion layer but also to the presence of refined grains along the interface and nanocrystalline Al2Cu in the transition zone. Furthermore, the hybrid nanocrystalline-amorphous microstructure strengthened the joint by regulating the balance between strength and ductility.

Background: Several kinds of research say that adjuvant blood glucose and blood pressure are usual, but an efficient solution for medical application count remains. This review analyzes the pandemic blood pressure and blood glucose to identify the publications which tell about the clinical practices and research gaps in systematic research.Methods: A study guides to identify the research of Blood Pressure (BP) and Blood Glucose. In order to analyze the recent innovations and research on BP and Blood glucose, the relevant publications and literature from journals were identified.Results: Co-morbidity of BP and Blood glucose is reported as very high. The commonness of blood pressure is thrice as high in type I diabetes patients and almost two times higher in type II diabetes patients when compared to others without Diabetes. The pervasiveness of getting depression is more in the female when compared with men. A detailed study about the linkage of BP and blood glucose tells that the relationship between them is not exactly clear.Limitations: Nearly all reviews providing the linkage of BP and blood glucose are with some limitations and they are not providing any clear conclusion.Conclusions: Present research tells that people having high blood glucose will have a greater chance of getting high blood pressure. More research is needed to state the linkage between BP, blood glucose, and the growth of diabetes mellitus issues and to provide support for managing Diabetes.

The objective of this research was to explore the impact of a gradual replacement of Ca2+ with Mn1+ on the crystal structure of CaHPO4·2H2O, which could be beneficial for producing Ca1−xMnxHPO4·nH2O compounds. In order to prepare the starting solutions required for this study, Ca(NO3) 2·4H2O, (NH4)·2HPO4, and MnNO3·4H2O were used at various molar concentrations. The findings reveal that Mn substitutes Ca partly at low Mn/Ca molar ratios, and Mn doping reduces the unit cell of CaHPO4·2H2O. The produced biphasic compound was composed of monoclinic CaHPO4·2H2O and triclinic/monoclinic nanostructured Mn3PO4O11 after a continuous increase in the Mn/Ca molar ratio to 1. When the Ca/Mn molar ratio is 1.5, a triphasic compound of monoclinic CaHPO4·2H2O, triclinic Mn3P4O11, and Orthorhombic MnHPO4·(H2O)3 phases is formed. The formation of the monophasic MnHPO4·(H2O)3 compound was achieved by increasing the Mn/Ca molar ratio above 4. By adjusting the Mn/Ca molar ratio in the initial solutions, it is possible to produce biomaterials with specific and bespoke characteristics in the future. The Mn/Ca ratio of the starting solution can be modified to produce Ca1-xMnxHPO4-nH2O phases with weight percent compositions, as established. For the first time, Ca1−xMnxHPO4·nH2O compounds were synthesized using novel methods in this manuscript.

A new class of nano-cube core-shell heterostructures containing Ag coating on the top of WO₃ was fabricated. Physical vapor deposition was used to produce WO₃ based nano-heterostructures. All kind of wet toxic chemical process was avoided to make the process simple and contaminant free. Sputtering of WO₃ and a subsequent thermal annealing process was done to create nano-cubes of WO₃. After that, sputtering of Ag was performed to form the Ag-WO₃ core-shell nano-heterostructures (CSNH). The CSNHs were characterized using field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction analysis (XRD) and UV-vis spectroscopy. The morphologies, elemental analysis, interfaces, crystallinity, phases, and chemical compositions were analyzed. The bottom-up growth of WO₃ nanocubes was studied using different time periods at 900°C. Ag coating was also studied before and after annealing. Finally, an optical property (band gap) was also analyzed using Tauc plot derive from absorption spectra. The tailoring the band gap of WO₃ from ~2.9eV to ~ 2.45 eV was observed while Ag-WO₃ CSNH formed.

This paper investigates the influence of magnetic field for a two dimensional deformations on a two temperature problem at the free surface of a semi-infinite semiconducting medium under the effect of mechanical force during a photothermal theory and the effect of hydrostatic initial stress on the medium. The Harmonic Wave Method (Normal Mode Analysis) has been used to obtain the equations of elastic waves, heat conduction equation, quasi-static electric field, carrier density, two temperature coefficient, ratios, and constitutive relationships for the thermo-magnetic-electric medium. The effects of several parameters as thermoelastic and thermoelectric coupling parameters and two temperature parameter of this force on the displacement component, force stress, carrier density and temperature distribution has been depicted graphically.

Peste des Petits Ruminants (PPR) is one of the major transboundary animal diseases that severely impact livestock production and trade worldwide. An investigation was carried into the seroprevalence and risk factors of PPR in small ruminants, camels, and wild ruminants in Bahrain. A total of 1240 serum samples were collected from 119 sheep flocks and 1224 serum samples from 125 goat herds. In addition, 100 sera from camels and 38 sera from wild ruminants, were collected. Serum samples were tested for the presence of PPR specific antibodies using a competitive ELISA. Flock management and health information of the flocks and herds were collected using a semi-structured questionnaire. The individual prevalence of PPR in sheep and goats was 26% and 25.5%, respectively. The flock or herd level prevalence of PPR was 22.7% and 29.6% in sheep and goats, respectively. None of the tested camels or wild ruminants were positive for PPR-specific antibodies. Sheep and goats from the Northern governorate were more likely to be seropositive to PPR than in other governorates. On the individual animal level, the univariate analysis suggested; age (<12 months), sex (male), and health status (weak animals) as risk factors for PPR seropositivity. On the flock/herd level, the multivariable logistic regression analysis identified large flock/herd size and semi-intensive farming as risk factors for PPR seropositivity.

Background –The brinjal is of much importance in the warm areas of Far East, being grown extensively in India, Bangladesh, Pakistan, China and the Philippines. It is also popular in Egypt, France, Italy and United States. Preserving soil fertility throughout time by preserving organic matter and soil biological diversity, mechanical intervention, as well as exercise is highly needed in upcoming future. Effect of six different fertilizer, five organic and one synthetic fertilizers listing vermicompost, poultry manure, mustard cake, neem cake, bonemeal and N:P:K study were main concern of this investigation to find out the most suitable fertilizer for the brinjal.Result - the final growth and development through N:P:K @ 1.5%(19:19:19) outperformed all the organic fertilizers but when considering only organic fertilizer performance vermicompost@5 ton/ha was outperforming all the other organic fertilizers. Coming close to it, mustard [email protected]/ha has shown its inheritance in providing nutrients. Use of other organic fertilizers are also effective use of poultry manure can provide nitrogen in higher amount in short time. Higher temperature above 25 degree Celsius cause slow growth, temperature range between 21 to 14 degrees Celsius was found better in terms of growth of flower and fruit formation.Conclusion – our experiment demonstrate specific organic fertilizer use over other fertilizers in terms of brinjal different developemental parameters and there is even comparision between synthetic fertilizer with organic fertilizer readily available in market. Vermicompost showed promising result followed by mustard cake for this specific brinjal genotype in northern plain of Indian subcontinent.

Gestational trophoblastic diseases (GTDs) encompass a spectrum of conditions characterized by abnormal trophoblastic cell growth, ranging from benign molar pregnancies to malignant trophoblastic neoplasms. This systematic review explores the molecular underpinnings of GTDs, focusing on genetic and epigenetic factors that influence disease progression and clinical outcomes. Based on 65 studies identified through systematic search and selection criteria, key findings include dysregulations in tumor suppressor genes such as p53, aberrant apoptotic pathways involving BCL-2, and altered expression of growth factor receptors and microRNAs. These molecular alterations not only differentiate molar pregnancies from normal placental development but also contribute to their clinical behavior, from benign moles to potentially malignant forms. The review synthesizes insights from immunohistochemical studies and molecular analyses to provide a comprehensive understanding of GTD pathogenesis and implications for personalized care strategies.

Salmonella Typhimurium is a typical Gram-Negative bacterium associated with food-borne illness threatening public health. This pathogen is reported to have caused millions of infections and thousands of hospitalizations yearly in the United States alone. Salmonella Typhimurium has a sophisticated array of virulent factors, including its flagella, which contributes significantly to its pathogenicity. Cannabidiol (CBD), the non-psychoactive component of the cannabis plant, has attracted the interest of many researchers recently because of its antimicrobial properties. With the growing interest in exploring CBD’s antimicrobial properties, we, in this study, have delved into unravelling how prolonged exposure of Salmonella Typhimurium to CBD influences the expression of the flgA gene. We hypothesized that the exposure of Salmonella Typhimurium to CBD may result in flgA upregulation, causing the bacteria to withstand various stresses and potentially enhance its survival rates and pathogenicity. We have employed several assays, such as mRNA expression, motility assays, pH induction assays, nutrient starvation interventions, and biofilm analysis, to explore the influence of CBD on the pathophysiology of Salmonella Typhimurium. Our findings reveal that CBD-resistant strains exhibit enhanced resilience to extreme pH levels and motility and survive poorly under nutrient starvation, with more robust biofilm formation compared to the susceptible strains. The results contribute to the broader comprehension of CBD resistance mechanisms in bacteria. This work provides insight into the potential therapeutic interventions for controlling CBD-resistant bacterial infections. This study also underscores the essence of exploring novel alternative antimicrobial agents to tackle the ever-persistence of bacterial antibiotic resistance.

Lung cancer remains a pervasive global health challenge, necessitating precise and efficient classification methods to inform optimal treatment strategies. In this study, we investigate the potential of machine learning algorithms in developing a computer-aided diagnostic tool for early and accurate lung cancer classification, leveraging essential protein biomarkers as predictive features. Our investigation reveals the superiority of Deep Neural Networks (DNNs) in lung cancer classification, achieving an impressive accuracy of 96.91%. This highlights the transformative potential of DNNs in facilitating real-world clinical applications, offering clinicians a powerful tool for accurate diagnosis and prognosis. Additionally, we analyze the performance of Ensemble Methods, including Voting (91.75%) and Bagging (93.81%), as viable alternatives to DNNs. These ensemble techniques demonstrate robust performance, further underlining their utility in lung cancer classification tasks. Furthermore, our study underscores the critical role of hyperparameter tuning, particularly in adjusting parameters such as min child weights and learning rates, in mitigating overfitting and enhancing the generalizability of diverse machine learning models. For instance, Support Vector Machines (SVM) exhibit varying accuracies ranging from 74.23% to 95.88% across different hyperparameter configurations, emphasizing the importance of hyperparameter optimization in maximizing model performance. In summary, our comprehensive comparative analysis sheds light on the efficacy of different machine learning approaches in lung cancer classification. By leveraging advanced algorithms and optimizing model parameters, researchers and clinicians can harness the power of machine learning to advance early detection and personalized treatment strategies for lung cancer patients.

Driven by the importance of early detection for improving patient outcomes, this study investigates the effectiveness of various machine learning algorithms in predicting lung cancer based on clinical data. Lung cancer remains a significant global health concern, and this research seeks to contribute to advancements in early diagnosis through the application of machine learning techniques. The dataset consists of 385 training and 97 test samples, with a k-fold cross-validation approach (k=5) utilized to mitigate overfitting. Additionally, the ADASYN oversampling technique is employed to address class imbalance. Our analysis includes traditional algorithms such as Logistic Regression and Decision Trees, as well as ensemble methods like XGBoost, LGBM, and AdaBoost. Furthermore, we explore the effectiveness of deep learning models, particularly Deep Neural Networks (DNN). Results demonstrate promising accuracy rates across all models, with some outperforming others in terms of precision, recall, and F1-score. Our findings reveal that LGBM achieves the highest accuracy among all models, with an accuracy rate of 96.91%. It also exhibits superior performance in terms of precision, recall, and F1-score, particularly in classifying both positive and negative instances of lung cancer.

High dimensional datasets are highly likely to have redundant, irrelevant, and noisy features that negatively affect the performance of the classification algorithms. Selecting the most relevant features and reducing the dimensions of datasets by removing the undesired features is a dimensional reduction technique called Feature Selection (FS). In this paper, we propose an FS approach based on the Black Hole Algorithms (BHO) with a mutation technique called MBHO. Generally, BHO contains two major phases. At the exploitation phase, a set of stars are modified based on some rule and according to some objective function, the best star is selected as the black hole which attracts other stars. Furthermore, when a star gets closer to the event horizon, it will be swallowed and a new one will be randomly generated in the search space which thus is the exploration phase. However, randomness may cause the algorithm to fall into the trap of local optima, and to overcome such complications, inversion mutation is used. Furthermore, we modify a widely utilized objective function in most of the proposed works for wrapper feature selection by combining two new terms that are based on the correlation among the selected subset of features and the features and the classification label. We also utilize a transfer function, known as the V2 transfer function, to convert continuous values into discrete ones to enhance search. We assess our approach via extensive evaluation experiments using fourteen benchmark datasets. We benchmark the performance of a wrapper FS approach called Binary Cuckoo Search (BCS), and three filter-based FS approaches (namely Mutual Information Maximisation (MIM), Joint Mutual Information (JMI), and minimum Redundancy Maximum Relevance (mRMR)). Our evaluation has shown that the proposed model is an effective approach for FS, in selecting better features that enhance the performance metrics on the classifiers. Thus, MBHO can be utilized as one alternative to the existing state-of-art-approaches. We release the source codes of our implementation for the community to build on with new methods and datasets.

The endocannabinoid system (ECS) is a complex neuromodulatory network in the human body that have enormous impact in developing the central nervous system, as well as modulates various physiological processes. The ECS is made up of anandamide, 2-arachidonoylglycerol (2-AG), which are responsible for the synthesis and degradation of endocannabinoids, and enzymes such as FAAH and MAGL ensures the precise control over endocannabinoid levels. The ECS relies on CB1 receptors found in the central nervous system (CNS), and CB2 receptors found in the peripheral nervous system and immune cells. Dysregulation of the ECS has been associated with several health conditions, prompting investigations into its association with phytocannabinoids to harness their therapeutic potential. The ECS is intricately linked with the nervous system, and it is known to modulate neuronal activities in the CNS, influencing pain and mood modulation. The ECS is also associated with neuropathies-peripheral nerve damage leading to symptoms such as weakness, numbness and pain as evidenced in diabetic neuropathy, Guillain-Barré Syndrome, carpal tunnel syndrome, peripheral neuropathy, and postherpetic neuralgia. The focus of this review is on the interplay between 2-arachidonoylglycerol and anandamide amidohydrolase in neuropathy, elucidating their roles in pain regulation, inflammation, and specific neuropathies. The knowledge generated is expected to have broad implications, providing comprehensive insights into neuropathic conditions and how to improve on them. Ultimately, this understanding may lead to more effective treatments and improved quality of life for individuals affected by these conditions.

This article delves into the enduring relevance of Liberal International Relations (IR) Theory amidst persistent criticisms regarding power dynamics and its applicability in emerging states. Despite its detractors, Liberal IR Theory offers a nuanced understanding of state behavior, blending social contexts with power dynamics. It recognizes the intricacies of economic interdependence and advocates for a balanced approach in advancing democracy and human rights. While nationalism poses challenges to international institutions, their adaptability endures. Leaders, albeit constrained, retain the capacity to foster peace through visionary leadership and global cooperation. By acknowledging its limitations and fostering open dialogue, Liberal IR Theory continues to evolve, poised to contribute to a just and peaceful global order.

Over the years, the need for autonomous systems such as drones, also known as unmanned aerial vehicles (UAVs), has significantly increased in popularity across several industries, including the military. The Internet of Battlefield Things (IoBT) represents a modern technological advancement that significantly enhances the operational efficacy of defense systems. It establishes an integrated military force by connecting individuals to intelligent technology in drones, radios, equipment, antennas and ground stations. This is achieved through the utilization of cloud and edge computing, sensors, mobile devices, embedded systems, and IoT-based systems. However, IoBT security is significantly compromised by enemies that exploit the vulnerabilities and malicious intrusions that specifically target the external environment or to obtain sensitive data. In addition, a comprehensive understanding of cyberattacks and countermeasures is essential for assuring the security of IoBT. On the other hand, as cyber threats get more complicated, trust becomes increasingly important for the security of digital systems. Within this context, the zero trust architecture contends that the security of a complex network is inherently vulnerable to internal and external threats. In defense, UAV security system applications, for example, the primary purpose of the zero trust architecture is to limit the vulnerability of military UAV systems to cyberattacks, hence reducing the possibility of data breaches and illegal entry. This study conducts a systematic review aimed at identifying different aspects of cybersecurity strategies for protecting UAV systems within the IoBT domain. Furthermore, zero trust architecture is presented in the study as an effective prospective solution to the security issues that develop in defense UAV systems.

The present study was conducted with the aim of analyzing the impact of social networks on political socialization and political participation of political science students of the Islamic Azad University of Tehran, Tehran south branch during 2007-2017. This article is a descriptive-survey research based on the theory of planned behavior and has been done based on random sampling with a population of 280 samples. The findings indicate that 93% of students use social media and spend a significant part of their study hours on social networks, which mainly include Telegram, Instagram, Facebook, Twitter and WhatsApp. The variables related to social networks affect the socialization and political participation of students, and the extent of the impact of social networks on encouraging individuals to participate in the election as a component of political socialization is positive and significant. This finding and other findings are a positive and significant impact of social networks on the attitudes, values ​​and norms, attitudes and behaviors of political science students as a sample population, and thus the hypothesis of this research has been confirmed.

The objective of the study was to evaluate the risk factors associated with lower COVID-19 vaccination rates in the United States. The study evaluated the effect of red-blue political affiliation and the effect of the US state's average educational aptitude score and per capita income on states' vaccination rates. The study found that states with concomitantly lower income along with lower educational aptitude scores are less vaccinated while the states with higher income have higher vaccination rates even among those with lower educational aptitude scores. These findings stayed significant after adjusting for red-blue political affiliation where states with red political affiliation have lower vaccination rates. Further study is needed to evaluate how to stop online misinformation among states with low income and low educational aptitude scores; and whether such an effort will increase overall vaccination rates in the United States.

Contamination in coastal regions attributed to fluoride and nitrate cannot be disregarded, given the substantial environmental and public health issues they present worldwide. Maintaining water quality is crucial for environmental well-being. This comprehensive study was performed to assess the spatial as well as indexical water quality, identify contamination sources, and evaluate associated health risks pertaining to nitrate and flouride in AlHassa region, KSA. The physiochemical results revealed a pervasive pollution of the overall groundwater. The dominant water type was Na-Cl, indicating saltwater intrusion and reverse ion exchange impact. Spatiotemporal variations in physicochemical properties suggest diverse hydrochemical mechanisms, with geogenic factors primarily influencing groundwater chemistry. The groundwater pollution index varied between 0.8426 and 4.7172, classifying samples as moderately to very highly polluted. Similarly, the synthetic pollution index (in the range of 0.5021-4.0715) revealed that none of the samples had excellent water quality, with various degrees of pollution categories. Nitrate Health Quotient (HQ) values indicated chronic human health risks ranging from low to severe, with newborns being the most vulnerable. Household use of nitrate-rich groundwater for showering and cleaning did not pose significant health risks. Fluoride HQ decreased with age, and children faced the highest risk of fluorosis. The Hazard Index (HI) yielded moderate to high-risk values. Nitrate risks were 1.21 times higher than fluoride risks, as per average HI assessment. All samples fell into the vulnerable category based on the Total Hazard Index (THI), with 88.89% classified as very high risk. This research provides valuable insights into groundwater quality, guiding water authorities, inhabitants, and researchers in identifying safe water sources and vulnerable human populations. The results highlight the need for appropriate treatment techniques and long-term coastal groundwater management plans.

Listwaenite rocks are widely spread in Fenja area of the Semail ophiolite of Oman and in Islam Abad area of the Neyriz ophiolite of Iran. There are three types of listwaenites found in these regions: silica-, carbonate-, and carbonate-silica (which includes dolomite, calcite, and magnesite. The alteration of host harzburgites started with hydrothermal alteration to serpentinite, followed by carbonation and silicification of serpentinite. Calcite- and magnesite-dolomite- listwaenites are more abundant in the Fenja area of Oman, while dolomite-listwaenites are more abundant in Islam Abad area in Iran. The mineralogy of listwaenites varies in both Iran and Oman; common minerals include quartz, calcite, goethite, magnesite, dolomite, serpentine, hematite, magnetite, Cr-mica, and Cr-spinel The major element chemistry of the different types of listwaenites in both Fenja and Islam Abad area generally comparable, and is largely similar to that of hydrothermally carbonated harzburgites, serpentinite, and listwaenites worldwide, despite spanning extraordinary and highly variable contents in major oxides, such as CaO, SiO2, MgO and LOI. Relict texture and common occurrence of Cr-spinel as well as the high concentrations of Cr, Ni and Co suggest that the protolith of the listwaenites in both regions was serpentinized harzburgites and serpentines. In comparison to the primary mantle and chondrite in spider diagrams, the Neyriz listwaenites have higher trace and REE element abundances than comparable listwaenites in the Fenja region. Harzburgite-normalized patterns of trace elements and REE in serpentinite and listwaenites overlap the average composition of harzburgite. PM-normalized trace element and REE patterns for serpentinized harzburgite and serpentinite show enrichment in Cs, U, Pb and Sr, with no Eu anomaly, comparable to mantle wedge serpentinites. The variable and high abundances of Ca, Mg, Ba, Zr, Sr, Pb, Zn, Mo and W in the carbonate- and silica-carbonate listwaenites, with unique Si enrichment and Mg, Na2O, Zr, Y, Ba, Sr, Rb, Cu, Pb, Sc, Cs, Nb, Mo and W. depletion in silica listwaenites are indicative of large fluctuations in major and trace element mobility. Cr, Ni and Co were immobile during alteration Enrichment in Ca and Si could occur by internal or late outside supply. Ca, Mg and Si are conceivably the foremost mobile major components amid harzburgite and serpentinite carbonation with mobilization confirmed by formation of quartz and Mg-carbonate in silica-carbonate listwaenites and quartz in silica listwaenites. The listwaenites in Islam Abad and Fenja area were formed due to hydrothermal alteration of serpentinite along thrust faults and shear zones which acted as pathway for Ca and/or Si rich fluids. The intensity of deformation in Islamabad listwaenites has been higher than Fenja listwaenites as indicated by higher abundance of trace elements.

The paper delineates the developed vision system of the UR5 cobot and the operating algorithm of the robotic quality control station. The hardware-software architecture of the developed robotic station was shown, consisting of a UR5 cobot equipped with a web camera and a stationary industrial camera with a lighting system. Image processing and analysis algorithms were described, the method of control and communication between the station components was discussed, and two operating scenarios were presented as a single robotic station and a robotic line. Based on the results obtained, the level of measurement noise, accuracy, and repeatability of the developed vision system were estimated.

In order to establish the formation patterns of the Co–Mg oxide system, samples with different Co:Mg ratios and heat treatment temperatures were synthesized and studied. Study of the sam-ples confirmed the phase transition of MgxCo2–xO4 spinels into corresponding solid solutions at 800–900 °C. The similarity of formation patterns for different compositions is shown. The rock-salt oxide in low-temperature samples is an anion-modified paracrystalline phase that forms a “true” solid solution only upon spinel decomposition. TPR profiles of decomposed Co3O4 spinel show surface Co3O4 peaks and a wide peak corresponding to well-crystallized CoO, while par-tial Co3O4 TPR up to 380 °C results in dispersed and amorphous CoO. High-temperature non-stoichiometric samples are poorly reduced, indicating their low oxygen reactivity. Spinel reoxidation after heat treatment to 1100 °C by calcination at 750 °C showed complete regenera-tion for MgCo2O4–Co3O4 samples and its absence in case of an excess of MgO relative to stoi-chiometry. Based on the data obtained, it can be concluded that the processes governing the formation of Co–Mg oxide systems are determined by both Co:Mg ratio and the heat treatment conditions, potentially providing the possibility of fine tuning for specific catalytic processes.

Bromodomain (BRD)-containing proteins are involved in many biological processes, most notably epigenetic regulation of transcription, and BRD protein dysfunction has been linked to many diseases, including tumorigenesis. However, the role of BRD proteins in the pathogenesis of uterine fibroids (UFs) is entirely unknown. The present study aimed to determine the expression pattern of BRD9 protein in UFs and matching myometrium and further assess the impact of BRD9 inhibitors on UF phenotype and epigenetic/epitranscriptomic changes. Our studies demonstrated that the levels of BRD9 were significantly upregulated in UFs compared to matched myometrium, suggesting that the aberrant BRD protein expression may contribute to the pathogenesis of UFs. We then evaluated the potential roles of BRD9 using its specific inhibitor I-BRD9. Targeted inhibition of BRD9 suppressed the UF tumorigenesis with increased apoptosis and cell cycle arrest, decreased cell proliferation, and extracellular matrix deposition in UF cells. The latter is the key hallmark of UFs. Unbiased transcriptomic profiling coupled with downstream bioinformatics analysis further and extensively demonstrated that targeted inhibition of BRD9 impacted the cell cycle- and ECM-related biological pathways, reprogrammed the UF cell epigenome and epitranscriptome, and altered miRNA-mediated gene regulation in UFs. Taken together, our data support the critical role of BRD9 in UF cells and the strong interconnection between BRD9 and other pathways controlling the UF progression. Targeted inhibition of BRD proteins might provide a non-hormonal treatment option for this most common benign tumor in women of reproductive age.

Dietary habits, including meal frequency, meal timing, and skipping meals, have been extensively studied due to their association with the development of non-communicable diseases (NCDs). This study describes dietary habits, meal timing, meal frequency, skipping meals, and late-night eating in Kuwaiti adults. The Kuwait National Nutrition Surveillance System data was utilized to reach the objectives of this study. The findings reveal that approximately 50% of the adults in Kuwait eat after 10 p.m., 29% skip breakfast, and 9.8% skip dinner. Furthermore, adults in Kuwait consume 4.4 meals per day on average. Women skip breakfast more often and have extended night fasting than men (p<0.001). Married adults skip breakfast and dinner less than unmarried adults (p<0.001). In conclusion, this descriptive study provides valuable insights into the dietary habits of Kuwaiti adults, emphasizing the importance of further investigating the association between meal timing, meal frequency, and the prevalence of NCDs in Kuwait.

Background: Intelligence quotient (IQ) is a measure of intellectual ability of performing, comprehension, and learning. Previous studies reported that intelligence measures predict various measures of job performance and income. Emotional awareness (EA) is the measure of emotional capacity to recognize and make sense of one’s emotions, as well as those of others. A high level of emotional awareness (EA) indicates one can learn from expressed emotions quickly. Both IQ and EA are important for personal and professional success.Objective: This study tests the hypothesis that the average national income rank is best predicted by the combined effect of the population's average intelligence quotient (one's ability to perform and learn) and emotional awareness (ability to recognize and make sense of emotions).Method: The population’s average intelligence quotient (IQ), emotional awareness (EA), and indices of good governance, which include corruption perception index and educational expenses for each country, were obtained from public data sources. The outcome variable was per capita gross national income. All the variables that are statistically significant in univariate analysis were included in the multivariate regression analyses but excluded from the final model if not statistically significant.Result: The total number of countries included in the final analysis was 81 because of missing values in different variables. Intelligence quotient (IQ) and emotional awareness (EA) were found to be highly correlated, at 0.77 and 0.32 respectively, with the per capita gross national income. The independent effects of intelligence quotient (IQ) and emotional awareness (EA) were found significant in the multivariate model after adjusting for measures of good governance. The R square value for the final multivariate model was 0.82. The corruption perception index (CPI) and educational expenses were strongly correlated with other measures of good governance such as democracy index, functioning of government, electoral process and pluralism, political participation, and civil liberty, but these variables were found not significant in the multivariate model. Conclusion: The study concludes the effect of intelligence quotient (IQ) and emotional awareness (EA) are complementary to each other but intelligence quotient (IQ) is a stronger predictor than emotional awareness (EA) for gross national income or wealth. We also find that indicators of good governance, including corruption perception index and educational expenses, have important associations with per capita gross national income. This study implies a nation may build more wealth if the educational system focuses on developing emotional awareness in addition to intelligence. The study concludes the effect of intelligence quotient (IQ) and emotional awareness (EA) are complementary to each other but intelligence quotient (IQ) is a stronger predictor than emotional awareness (EA) for gross national income or wealth. We also find that indicators of good governance, including corruption perception index and educational expenses, have important associations with per capita gross national income. This study implies a nation may build more wealth if the educational system focuses on developing emotional awareness in addition to intelligence.

This research aimed to figure out the applications of HbA1c protein and HbA1 gene as the prognostic biomarkers for assessing the risks of different cancers among male T2D patients in Bangladesh considering their serological and oncoinformatic parameters. Depending on the concentrations of HbA1c (%) of the T2D patients (n=300), their individual FBS (mmol/L); THABF (mmol/L); creatinine (mg/dl); SC (mg/dl); STGs (mg/dl); HDLC (mg/dl); and LDLC (mg/dl) were estimated. The values of the patients were compared with the control (n=60) group as the serological analysis. Besides, HbA1 gene (encoding hBA1c protein) overexpression and promotor methylation responsible for BLCA, BRCA, CHOL, COAD, LUAD, LUSC, PAAD, and PRAD cancers in the male T2D patients were profiled as the oncoinformatic parameters based on the sample types; caner stages; racial footprints; gender; age; nodal metastasis; p53 methylations; pancreatitis; diabetes status; smoking behaviors; and overall/disease-free survivability. Finally, the ‘HbA1 gene strings’ responsible for genetic coexpression; endophytic vesicle regulation; antioxidant regulation; oxygen species metabolic regulation; and gene-mediated response to the reactive oxygen molecules were studied comprehensively. A strong correlation between BMI and FBS was observed in both the patients and the control (P<0.0001). Similarly, the values of FBS, THABF, and creatinine resulted in equal significance (P<0.0001) as compared to the HbA1c concentrations of all the T2D and control individuals. The SC, STGs, HDLC, and LDLC concentrations regulated ardently in both the control (P<0.0001), and patients group (P<0.0001), while HbA1c ranged from 3.8-5.8%, and 5.11-15.8% respectively. HbA1 gene is found downregulating with cancer progressed in most of the oncoinformatic parameters. According to the DA, CS, EI, CE, PC, NC, GF, H, and AT profiles; the HbA1 gene interacts with 8 other genes responsible for creating a protein cluster comprising- AHSP, HBA1, HBA2, HBB, HBD, HBE1, HBG2, RPS12, and RPS19 proteins for cancer formation. To recapitulate, HbA1c protein and HbA1 gene can be used as the prognostic serological and molecular biomarkers respectively for determining the risks of cancers among male chronic T2D patients.

Microbial composition across substrates in mangroves, particularly in the Middle East, remains unclear. This study characterized bacterial communities in sediment, water, Terebralia palustris snail guts, and plastic associated with Avicennia marina mangrove forests in two coastal lagoons in the Sea of Oman using 16S rDNA gene MiSeq sequencing. The genus Vibrio dominated all substrates except water, which featured unique genera Sunxiuqinia and Pseudomonas. There were significant differences in bacterial communities on different substrata, in particular plastic. Snail guts harbored the highest number of unique Operational Taxonomic Units (OTUs) in both lagoons. Plastic in the polluted Sawadi lagoon with low salinity harbored distinct genera like Vibrio, Aestuariibacter, Zunongwangia, and Jeotgalibacillus absent in Qurum lagoon with higher salinity and low pollution. Sawadi lagoon exhibited higher species diversity in sediment and plastic substrates, Qurum lagoon demonstrated lower overall species diversity. The PCA indicates that environmental factors like salinity, pH, and nutrient levels significantly influence bacterial community composition across substrates. Variations in organic matter and potential anthropogenic influences, particularly from plastics, further shape bacterial communities. This study highlights the complex microbial communities in mangrove ecosystems, emphasizing the importance of considering multiple substrates in mangrove microbial ecology studies.

E-commerce is the general concept of using new technologies to establish chain communication between producers, sellers, suppliers, generally providers of goods and services on the one hand and buyers, consumers or customers in general on the other hand, in order to make a decision. The best ways are to optimize goods and services, reduce costs and open new channels. This article tried to propose an e-commerce model for fresh agricultural products, which can not only maximize producer and consumer satisfaction, but also reduce waste, increase marketing efficiency, and provide environmental protection and sustainable development. The proposed model is based on a coherent and real-time monitoring system, designed by managers and clarification for producers and consumers. The components of this system are manufacturers, retailers, banks, sales and purchase brokers, logistics systems, supervisors and management of the e-commerce system. This system manages information flow, money flow and goods flow accurately and transparently. In this presented model, the duties of each member and how they work were explained, and its implementation requirements were also specified. This model paves the way for the future of sustainable food and preserving the environment with two functions, reducing waste and increasing consumer satisfaction through the supply of unprocessed and fresh products.

This paper presents the deformation of the joined sheet after the clinch-riveting process. The DX51D steel sheet with zinc coating was used. The samples to be joined with clinch riveting technology had a thickness of 1±0.05 mm and 1.5±0.1 mm. The sheet deformation was measured before and after the joining process. The rivet was pressed in the sheets with the same dimension between the rivet axis and three sheet edges: 20, 30 and 40 mm. For fixed segments of the die, from the rivet side close to the rivet, the sheet deformation was greater than that of the area with movable segments. The movement of die sliding element caused more sheet material to flow in the space between the fixed part of the die and movable segments. Hence, the sheet deformation in these places was smaller than for the die fixed element – sheet material was less compressed. For sheets thickness 1.5 mm and width 20 mm, the bulk of the sheet was observed. For a sheets width of 20 mm, it was observed that the deformation of the upper and lower sheets in the area of the rivet is greater than for sheets width of 30 or 40 mm.

Generative artificial intelligence tools are flourishing across various sciences, particularly in the educational domain. ChatGPT, with its versions 3.5 and 4.0, stands out for its multilingual capabilities, catering to both students and educators. This research aimed to evaluate the performance differences between these versions, and importantly, to compare the accuracy of ChatGPT's responses in English versus Arabic. In our study, we presented ChatGPT with 39 chemistry problems related to 6th-7th grade curriculum, including twenty-five open questions and fourteen multiple-choice questions. Each response was categorized as accurate, partially accurate, or inaccurate. Our analysis, focused on trends across versions and languages, revealed significant enhancements in version 4.0, particularly in its ability to process Arabic. However, despite these improvements, our findings indicate that responses in English consistently outperformed those in Arabic in terms of accuracy. In light of this discrepancy, we suggest that ChatGPT either incorporates additional Arabic databases into its training regimen or develops a code that adopts the following strategy to ensure more accurate responses in science education: questions should first be translated from Arabic to English, addressed, and then retranslated into Arabic before being presented to the user. This approach takes advantage of the greater accuracy of responses in English to benefit Arabic-speaking users, and it may also improve outcomes for speakers of other languages who experience less precise answers in the fields of chemistry or science education.

Rice blast is the most harmful disease caused by Magnaporthe oryzae, leading to yield loss. The aim of the work is to improve resistance of rice to blast by introducing and pyramiding genes using conventional breeding technique and modern MAS analysis. Pyramiding is the combination of several resistance genes in one genotype, in this case it improves the resistance of rice to pathogens. MAS analysis revealed that 3 out of 4 studied domestic high-yielding rice cultivars (Bakanasski, Aisaule and Aru) contain 1 blast resistance gene (Pi-2). It was discovered 7 pyramidal lines with the introduction of a combination of 2 blast resistance genes (Pi-1 and Pi-ta) into 6 hybrids and 3 genes (Pi-1, Pi-33 and Pi-ta) into 1 line. Phytopathological test of local cultivars and pyramidal lines of rice showed that 3 out of 7 pyramidal lines have moderate resistance: 2 lines (F2 Bakanasski/7667 (var. vulgaris Koern.) and F2 Aisaule/7664 (var. italica Alef.)), containing 2 resistance genes (Pi-1 and Pi-ta) and 1 line – F2 Aisaule/7689 (var. zeravschanica Brsch.), carrying 3 genes (Pi-1, Pi-33 and Pi-ta), while the local cultivars Bakanasski, Aisaule and Aru are susceptible. As a result, the blast resistance of rice was improved by creating pyramidal lines. Pyramided lines can be used for germplasm exchange and in rice breeding programs to improve blast resistance in rice.

Modern building automation systems implement plenty of advanced control and monitoring functions considering various parameters like users’ activity, lighting, temperature changes etc. Moreover, new solutions based on Internet of Things and cloud services are also being developed for smart buildings to ensure comfort of use, user safety, energy efficiency improvements and integration with smart grids and smart city platforms. Such a wide spectrum of technologies and functions requires a new approach in building automation systems design to provide effective way of their implementation and flexibility during operation. At the same time, in the building design and operation industries, tools based on building information modeling and digital twins are being developed. In this paper, the authors discuss development directions and application areas of these solutions, identifying new trends and possibilities of their use in smart homes and buildings. In particular, the focus is on procedures for selecting automation functions, effective integration, and interoperability of building management systems with Internet of Things considering organization of prediction mechanisms and dynamic functional changes in buildings and smart networks. Chosen solutions and functions should consider the requirements from EN ISO 52120 standard and the guidelines defined for the Smart Readiness Indicator.

Solar pasteurization, as a means of treating milk in remote rural areas without electrical power, is based on using solar energy to thermally inactivate pathogenic microorganisms at temperatures below the boiling point to maintain or improve milk quality. A solar milk pasteurizer of flat‐plate water‐heating glass acting as the solar collector, connected to a stainless-steel cylindrical milk vat, was constructed and evaluated in Navrongo, in the tropical savanna zone of Ghana, West Africa. The novel approach taken in this project is to integrate the solar collection and heat exchanger into a single unit using materials and fabrication techniques readily available in the developing world. The vat comprises a 1.5 mm thick stainless steel cylindrical tank, a 2.2 cm wide hot water jacket, and an outer layer of 5.0 mm thick aluminium foil insulation. Hot water produced by the collector was used for pasteurizing milk. The optimum quantity of milk that this device could pasteurize under the study conditions was 8 L. The device could pasteurize raw milk to a maximum temperature of 74 °C at 14:00 h GMT. The ambient temperature during the pasteurization ranged from 30 °C to 43 °C. The microbial analysis before and after the pasteurization was done, and the result shows that the total bacteria count before pasteurization was 6.6x10⁶ log CFU/mL per unit volume, and the total bacteria count after pasteurization was 1.0x10² log CFU/mL. By acceptable standards, the total bacteria count after pasteurization is within a safe range for consumption, and coliform counts were negative. The solar milk pasteurization system is cost-effective. Hence, it is appropriate for milk producers in arid pastoral areas without electricity to adopt the solar pasteurizer as an alternative to firewood as a fuel source for milk pasteurization. This approach can potentially create a cottage industry that may also play a crucial role as a water treatment technology that will improve the health of rural populations.

In this paper, we propose a system of nonlinear mixed variational inequality problems, which consists of two elliptic mixed variational inequality problems on Banach spaces. Under suitable assumptions, using the Kakutani-Ky Fan fixed point theorem and Minty techniques, we prove the solution set to the system of nonlinear mixed variational inequality problem is nonempty, weakly compact and unique. Additionally, we suggest a stability result for the system of nonlinear mixed variational inequality problem by perturbing the duality mappings. Furthermore, we present an optimal control problem governed by the system of nonlinear mixed variational inequality problems and establish a solvability result.

White oak mortality is a significant concern in forest ecosystems due to its impact on biodiversity and ecosystem functions. Understanding the factors influencing white oak mortality, particularly the soil properties, is crucial for effective forest management and conservation efforts. In this study, we aimed to investigate the spatial pattern of white oak mortality and examine the influence of soil properties on mortality rates. Multicycle Forest Inventory and Analysis data were compiled to capture white oak plots across the eastern US. White oak mortality data were collected across plot systems that utilized Diameter at Breast Height between two periods. Soil variables were analyzed to assess soil properties. Spatial analysis techniques, including geostatistics and regression modeling, were used to analyze the relationship between white oak mortality and soil characteristics. Results found clustered spatial patterns of white oak mortality across a broad scale depicting the significant effects of coarser soil textures, nutrient-deficient sites, and extreme soil moisture levels. Our findings demonstrated the importance of soil properties in shaping the spatial pattern of the white oak mortality rate. This idea can inform forest management practices for the conservation of white oak populations. Future research is needed for comprehensive soil assessment including biotic and abiotic factors for forest management strategies at a broader scale aimed at mitigating white oak mortality.

White oak mortality is a significant concern in forest ecosystems due to its impact on biodiversity and ecosystem functions. Understanding the factors influencing white oak mortality, particularly the soil properties, is crucial for effective forest management and conservation efforts. In this study, we aimed to investigate the spatial pattern of white oak mortality and examine the influence of soil properties on mortality rates. Multicycle Forest Inventory and Analysis data were compiled to capture all white oaks across the eastern US. White oak tree mortality data were collected across plot systems that utilized Diameter at Breast Height between two periods. Soil variables were analyzed to assess soil properties. Spatial analysis techniques, including geostatistics and regression modeling, were used to analyze the relationship between white oak mortality and soil characteristics. Results found clustered spatial patterns of white oak mortality across a broad scale depicting the significant effects of coarser soil textures (p = 0.00), nutrient-deficient sites, and extreme soil moisture levels (p <0.1). Our findings demonstrated the importance of soil properties in shaping the spatial pattern of white oak mortality rate. This idea can inform forest management practices for the conservation of white oak populations. Future research is needed for comprehensive soil assessment including biotic and abiotic factors for forest management strategies at a broader scale aimed at mitigating white oak mortality.

Sustainable development and education in sustainable development (ESD) are crucial and interconnected topics under wide discussion today. Young adults need to be educated in how to help bring about change. Thus, the dynamic relationship between school and home is important. In education, use could be made of English language classes, especially since English is a global language that enables access to the sustainability literature and facilitates discussion in global conferences and meetings. Consequently, English as a foreign language (EFL) students could gain confidence from being able to understand and use the terminology of, for example, sustainability. In this paper, the use of competence-based language teaching (CBLT) is proposed as a means of introducing sustainability topics into EFL writing classes at a university in Saudi Arabia. Students’ competence in sustainable development is therefore considered based on their ability to write about suggested sustainable development topics, measured on a scale for five dimensions of ESD proposed by Michelsen and Fischer (2017). The results demonstrate that the students possessed competence in sustainable development and intended to participate in its implementation. Thus, recommendations are made for the stakeholders in the education sector to include sustainable development topics as an initial offering in the curricula of various specialties using the CBLT approach.

Wheat and barley are among the primary food resources of the world population; therefore, their growth and observation are essential in farms to enhance food security worldwide. On top of that, careful observation of the product is essential to find solutions for the issues faced during their production and to reduce the impacts of weather changes. With the advancement of Remote Sensing technology, the observation and estimation process has increased. In this study, numbers of spectral vegetation indices was used along with canopy biophysical properties ( LAI ) and biochemical properties (chlorophyll), there calculated from (Landsat 8 and Sentinel-2) satellite data. The wheat and barley samples were collected before were be ready for harvest, and a relation with the vegetarian indices was established using the Multi-Linear Regression module, in which the equations used in predicting the harvest were developed and used to create a graph for expected harvest. The result indicated that there is a strong relationship between the vegetation indices of Sentinel-2 and Landsat images and the actual grain yield with R² of 0.77 and 0.71, respectively. The results show that the strongest correlation is observed between the LAI data obtained from Sentinel data and cereal yield data, with an R² 0.68, and the highest correlation for the indices of Landsat images is observed in the NDWI with R² 0.59 and the lowest degree of error was in the root mean square error (RMSE) for the Sentinel-2 and Landsat 8 with 0.57 and 1.54. In addition, this study also showed that the least relationship for grain yield prediction was observed between the NDRI for Sentinel-2 (R² 0.1) and SAVI for Landsat image (R² 0.47).

The Yb/Al multilayer films exhibit excellent theoretical reflectivity in the 54-90nm wavelength range. This study attempted to incorporate 1.5% wt.% of Si impurities into Al to suppress the crystallization of Al, reduce interfacial roughness, and enhance the actual reflectivity of the prepared Yb/Al multilayer films. The internal microstructure changes of the film layers before and after Si impurity doping were investigated using GIXRR, AFM, and XRD techniques. The reflectivity of two types of multilayer films, Yb/Al(1.5wt.%Si) and Yb/Al(pure), was tested to evaluate the effect of Si impurity on the film performance.

The leaves of Nicotiana glauca (Solanaceae) plant, are known for its major cause of health concern. This study investigated the antioxidant activity and polyphenols composition of aerial parts of N.glauca collected from its wild habitat in Jordan, using Methanol-Conventional (MC) and deep eutectic solvents (DESs) extraction methods in addition to nicotine content determination using UHPLC. The results have shown that the MC extract contains fewer total phenols and flavonoid content than the DES extract at ratio of 90% (0.1194 ±0.009 and 0.311± 0.020 mg/mL equivalent to gallic acid) and (0.01084±0.005 and 0.928 ± 0.09 mg/mL equivalent to rutin), respectively. Moreover, the study showed that the MC extract contains 635.07 ppm nicotine compared to the DES extraction method, which contains 1194.91 ppm. Both the MC and the DES extracts exhibited weak antioxidant activities with the highest was 33%inhibition equivalent to ascorbic acid was found for DES at (90%) ratio. The UHPLC-MS/MS analysis revealed the presence of variations in the detected compounds between the two extraction methods used. This study found that en-vironmentally friendly DES extraction of N. glauca produced higher phenol and flavonoid content than MC method, highlighting green chemistry methods' superior efficiency and environmental benefits for extracting valuable phytoconstituents.