Thyroid cancer is the most prevalent malignancy of the endocrine system and the ninth most common cancer globally. Despite the advances in the management of thyroid cancer, there are critical issues with the diagnosis and treatment of thyroid cancer that result in the poor overall survival of undifferentiated and metastatic thyroid cancer patients. Recent studies have revealed the role of different non-coding RNAs (ncRNAs), such as microRNAs (miRNAs), long non-coding RNAs (lncRNAs) and circular RNAs (circRNAs) that are dysregulated during thyroid cancer development or the acquisition of resistance to therapeutics, and may play key roles in treatment failure and poor prognosis of the thyroid cancer patients. Here, we systematically review the emerging roles and molecular mechanisms of ncRNAs that regulate thyroid tumorigenesis and drug response. We then propose the potential clinical implications of ncRNAs as novel diagnostic and prognostic biomarkers for thyroid cancer.

Antiphospholipid syndrome (APS) is a group of autoimmune diseases caused by antiphospholipid antibodies (aPLs) characterized by arteriovenous thrombosis and a morbid pregnancy. We deliberated a case report of seven cases to investigate whether inhibitors of tissue necrosis factor-α could reduce pregnancy dangers caused by APS. The seven patients are with increased tumor necrosis factor, poor improvement after receiving traditional inhibitory drugs. To address these situations, the tumor necrosis factor inhibitors were prescribed after getting the patient's informed consent, and the state of illness was carefully watched for. After treatment, symptoms of contractions and abdominal pain disappeared and the B ultrasound examination showed embryo survived with good obstetric outcomes. Subsequently, maternal and neonatal health is compromised. An intervention by the administration of TNF-α inhibitors was posited to be an effective way of reducing dangerous pregnancies like preterm pregnancies, premature deliveries, abortions and miscarriages. We reviewed outcomes from seven cases in an attempt to establish how TNF- α Inhibitors could save pregnancies. We focused on key pregnancy outcomes like birth weight, gestational weeks and preterm miscarriage to tell the outcomes of TNF- α Inhibitors in pregnancy. After careful evaluation of the results surrounding these aspects, we found that TNF- α Inhibitors could prolong gestational period. Other positive outcomes include the attainment of birth weights approach the threshold, zero incidence of preterm miscarriage.

This qualitative research explores the adoption of blockchain technology in supply chain management, aiming to understand the drivers, barriers, and implications associated with its integration. Through in-depth interviews and thematic analysis, insights are gathered from key stakeholders in the supply chain ecosystem. The findings reveal a complex landscape, with stakeholders recognizing blockchain's potential to enhance transparency, efficiency, and trust while acknowledging challenges related to technical complexities, regulatory uncertainties, and organizational barriers. Despite these challenges, participants express optimism about blockchain's transformative potential, citing opportunities for improved traceability, supply chain resilience, and sustainability. Collaboration, governance, and ecosystem development emerge as critical factors for driving blockchain adoption within supply chains, alongside the need for continuous education and capacity-building initiatives. Overall, the study underscores the importance of addressing challenges and fostering a culture of innovation and collaboration to unlock the full potential of blockchain-enabled supply chains.

This study explores the potential to reach a circular economy for post-consumer recycled polyethylene terephthalate (rPET) packaging and bottles by using it as a distributed recycling for additive manufacturing (DRAM) feedstock. Specifically, rPET is processed using only an open source toolchain with fused particle fabrication (FPF) or fused granular fabrication (FGF) processing. In this study, first the impact of granulation, sifting and heating (and their combination) is quantified on the shape and size distribution of the rPET flakes. Then feeding studies were performed to see if they could be printed through an external feeder or needed to be direct printed with a hopper using two Gigabot X machines, one with extended part cooling and one without. Print settings were optimized based on thermal characterization and for the latter which was shown to print rPET directly from shredded water bottles mechanical testing is performed. The results showed that geometry was important for extended feeding tubes and direct printed using a hopper. Further there is a wide disparity in the physical properties of rPET from water bottles depending on source and the history of the material. Future work is needed to enable water bottles to be used as a widespread DRAM feedstock.

In the first part of this talk we review some prerequisites for and essential arguments involved in the construction of the thermal-ground-state estimate for the deconfining phase in the thermodynamics of SU(2) Quantum Yang-Mills theory and how this structure supports its distinct excitations. The second part applies deconfining SU(2) Yang-Mills thermodynamics to the Cosmic Microwave Background in view of (i) a modified temperature-redshift relation with an interesting link to correlation-length criticality in the 3D Ising model, (ii) the implied minimal changes in the dark sector of the cosmological model, and (iii) best-fit parameter values of this model when confronted with the spectra of the angular two-point functions TT, TE, and EE, excluding the low-$l$ physics. The latter, which is treated in an incomplete way because of the omission of radiative effects, is addressed in passing towards future work.

On 17 October 1947, Niels Bohr was made a knight of the Order of the Elephant by the King of Denmark in view of his outstanding achievements and contributions to science. Bohr designed his own coat of arms that featured a pattern of Yin and Yang (Tai Chi symbol) to symbolize the wave-particle complementarity. However, Bohr’s Yin-Yang diagram (YYD) was neither drawn based on the principles of quantum mechanics, nor did it originate from the traditional Taoist YYD. Scientists still have doubts about the legitimacy of using YYD as the icon of the wave-particle complementarity, because the YYD belonging to quantum mechanics itself is unknown so far. This article reports the YYDs existing in quantum mechanics and justifies the role of YYD in the wave-particle duality by showing that any system, whether classical or quantum, has an ideal YYD as long as it satisfies Bohr’s principle of complementarity (BPC). The deviation of a deformed YYD from the ideal YYD indicates the extent to which a real system satisfies BPC. This article constructs the quantum YYD by the complex quantum trajectory of a particle tunneling via a step barrier, which displays the continuous transition between the wave behavior and the particle behavior. It appears that the YYD designed by Bohr in his coat of arms resembles the YYD generated by tunneling motion, not only in appearance but also in the governing equation.

We present set-theoretical solutions of the Yang-Baxter equation in BCK–algebras. Some solutions in BCK−algebras are not solutions in other structures (such as MV −algebras). Related to our investigations we also consider some new structures: Boolean coalgebras and a unified braid condition – quantum Yang-Baxter equation. Finally, we will see how poetry has accompanied the development / history of the Yang–Baxter equation.

This research investigates the challenges and opportunities associated with supply chain transparency and traceability in the renewable energy sector. Using a qualitative methodology, the study involved semi-structured interviews with key stakeholders, including industry experts, supply chain managers, regulatory officials, and NGO representatives. The findings reveal that the complexity and global span of renewable energy supply chains pose significant hurdles for ensuring transparency and traceability. Variability in the maturity of traceability systems across companies further complicates the landscape, with some companies benefiting from advanced systems while others struggle with cost and technical barriers. Technological advancements, especially blockchain, offer promising solutions but require standardization and scalability to be effective. Regulatory frameworks play a crucial role, yet inconsistencies across jurisdictions create compliance challenges, underscoring the need for harmonized standards. Collaboration and partnerships are essential, providing platforms for sharing best practices and developing common standards. Enhanced transparency can lead to operational efficiencies, improved consumer trust, and stronger market positioning. Integrating sustainability into supply chain practices is fundamental, aligning with the increasing emphasis on ESG criteria among investors and stakeholders. Education and capacity-building, particularly for suppliers in developing countries, are vital for promoting transparency. Leadership and corporate culture are critical in driving these efforts, with strong commitment from the top necessary to implement effective practices. This study contributes valuable insights for stakeholders in the renewable energy sector, offering a foundation for future research and policy development aimed at advancing sustainable and ethical supply chain practices. The findings highlight the need for a holistic approach that integrates transparency and traceability into broader sustainability and business strategies.

Patients with end stage liver disease (ESLD) undergoing liver transplantation are prone to thromboses both while on the waiting list or in the perioperative period. This hypercoagulability is associated with significant endothelial dysfunction (ED) due to nitric oxide dysregulation. ED in combination with increased thrombin generation are the main factors responsible for this hypercoagulability. Sepsis itself can significantly change the coagulation profile, but in combination with ESLD, sepsis, and septic shock is responsible for very complex changes in the patients coagulation making both assessment and management of coagulation in patients with ESLD very challenging. Viscoelastic testing (VET) is a preferred method of coagulation management in patients with cirrhosis because, as with standard laboratory testing, VET can assess the entire coagulation system including the interaction between both pro- and anticoagulants and platelets.

The rank-3 antisymmetric tensors which are the magnetic monopoles of SU(N) Yang-Mills gauge theory dynamics, unlike their counterparts in Maxwell’s U(1) electrodynamics, are non-vanishing, and do permit a net flux of Yang-Mills analogs to the magnetic field through closed spatial surfaces. When electric source currents of the same Yang-Mills dynamics are inverted and their fermions inserted into these Yang-Mills monopoles to create a system, this system in its unperturbed state contains exactly 3 fermions due to the monopole rank-3 and its 3 additive field strength gradient terms in covariant form. So to ensure that every fermion in this system occupies an exclusive quantum state, the Exclusion Principle is used to place each of the 3 fermions into the fundamental representation of the simple gauge group with an SU(3) symmetry. After the symmetry of the monopole is broken to make this system indivisible, the gauge bosons inside the monopole become massless, the SU(3) color symmetry of the fermions becomes exact, and a propagator is established for each fermion. The monopoles then have the same antisymmetric color singlet wavefunction as a baryon, and the field quanta of the magnetic fields fluxing through the monopole surface have the same symmetric color singlet wavefunction as a meson. Consequently, we are able to identify these fermions with colored quarks, the gauge bosons with gluons, the magnetic monopoles with baryons, and the fluxing entities with mesons, while establishing that the quarks and gluons remain confined and identifying the symmetry breaking with hadronization. Analytic tools developed along the way are then used to fill the Yang-Mills mass gap.

This study explores the barriers and opportunities faced by women in supply chain leadership, a field traditionally dominated by men. Through in-depth interviews and thematic analysis, it uncovers the pervasive cultural and societal biases that undermine women's perceived competence and suitability for leadership roles. These biases, often rooted in deep-seated stereotypes, influence hiring and promotion decisions, creating significant obstacles for women. Structural and organizational barriers, such as the lack of formal diversity policies, flexible working arrangements, and adequate mentorship, further hinder women's career progression. The dual burden of professional and domestic responsibilities also disproportionately affects women, limiting their availability for work-related travel and extended hours, which are often required in supply chain roles. Despite these challenges, the study identifies several pathways to promote gender diversity in supply chain leadership. Organizational commitment to diversity and inclusion, flexible working policies, and comprehensive mentorship programs are crucial in supporting women's advancement. Education and professional development opportunities are essential in equipping women with the necessary skills for leadership roles. Additionally, fostering an inclusive corporate culture that values diverse perspectives and addresses discrimination is vital for creating a supportive environment. Broader societal and policy-level changes, such as government and industry initiatives promoting gender diversity, are also necessary. The integration of emerging areas like sustainability, entrepreneurship, emotional intelligence, marketing, and supplier relationship management offers new opportunities for women to contribute to the industry's evolution. By addressing these barriers and leveraging the identified opportunities, it is possible to create a more inclusive and equitable supply chain industry, benefiting both the industry and society.

This qualitative study explores consumer perceptions of ethical supply chains and their implications for brand loyalty in contemporary markets. Ethical supply chain practices, encompassing sustainability, transparency, and social responsibility, are increasingly pivotal in shaping consumer attitudes and behaviors. A semi-structured interview approach was utilized to gather insights from a diverse sample of consumers, revealing nuanced perspectives on how ethical considerations influence brand preferences and loyalty. Findings indicate that consumers value brands that demonstrate genuine commitment to ethicality, viewing transparency and accountability in supply chain operations as essential for building trust and credibility. Emotional responses such as admiration and respect were commonly associated with brands perceived as ethical, highlighting the emotional resonance of ethical supply chain practices in consumer decision-making processes. Challenges such as greenwashing and perceived discrepancies between brand promises and actions underscore the importance of authentic communication in aligning consumer perceptions with brand behaviors. The COVID-19 pandemic further emphasized the role of ethical supply chains in ensuring business resilience and consumer trust during global disruptions. Brands that exhibited ethical leadership during the crisis reinforced their reputational capital and strengthened relationships with ethically conscious consumers. This study contributes to understanding the strategic imperative for businesses to integrate and communicate ethical supply chain practices effectively, thereby fostering sustainable competitive advantages and enhancing long-term brand loyalty. Future research directions include exploring evolving consumer expectations, emerging ethical challenges, and innovative strategies for embedding ethicality into supply chain management.This qualitative study explores consumer perceptions of ethical supply chains and their implications for brand loyalty in contemporary markets. Ethical supply chain practices, encompassing sustainability, transparency, and social responsibility, are increasingly pivotal in shaping consumer attitudes and behaviors. A semi-structured interview approach was utilized to gather insights from a diverse sample of consumers, revealing nuanced perspectives on how ethical considerations influence brand preferences and loyalty. Findings indicate that consumers value brands that demonstrate genuine commitment to ethicality, viewing transparency and accountability in supply chain operations as essential for building trust and credibility. Emotional responses such as admiration and respect were commonly associated with brands perceived as ethical, highlighting the emotional resonance of ethical supply chain practices in consumer decision-making processes. Challenges such as greenwashing and perceived discrepancies between brand promises and actions underscore the importance of authentic communication in aligning consumer perceptions with brand behaviors. The COVID-19 pandemic further emphasized the role of ethical supply chains in ensuring business resilience and consumer trust during global disruptions. Brands that exhibited ethical leadership during the crisis reinforced their reputational capital and strengthened relationships with ethically conscious consumers. This study contributes to understanding the strategic imperative for businesses to integrate and communicate ethical supply chain practices effectively, thereby fostering sustainable competitive advantages and enhancing long-term brand loyalty. Future research directions include exploring evolving consumer expectations, emerging ethical challenges, and innovative strategies for embedding ethicality into supply chain management.

Supply chain transparency and traceability have become increasingly important in today's globalized and interconnected business environment. This qualitative research explores the challenges and perspectives of industry practitioners regarding supply chain transparency and traceability. Drawing on semi-structured interviews with a diverse group of supply chain professionals, the study identifies key themes including difficulties in achieving visibility beyond immediate suppliers, data fragmentation and inconsistency, barriers to technology adoption, regulatory compliance, cultural and organizational factors, impacts on supplier relationships, and the influence of the COVID-19 pandemic and sustainability goals. The findings highlight the complex nature of these challenges and the need for collaborative, multi-stakeholder approaches to address them effectively. Despite the challenges, the study also reveals the potential benefits of transparency and traceability for enhancing supply chain resilience, sustainability, and stakeholder trust. Moving forward, companies must leverage technological innovations, establish clear communication channels with suppliers, navigate regulatory complexities, and foster a culture of transparency and accountability within their organizations. Future research should focus on practical strategies for implementing transparency and traceability initiatives, as well as evaluating their impact on supply chain performance and sustainability outcomes.

The abstract of the study on the challenges and opportunities of supply chain digitalization encapsulates the primary findings and their implications from the perspectives of industry leaders. This qualitative research investigated how senior executives across diverse sectors perceive and manage the transition to digital supply chains. Interviews with twenty industry leaders revealed key challenges such as data integration, cybersecurity, organizational resistance, and financial constraints. Data integration issues were particularly pronounced, as participants struggled with unifying disparate data sources from legacy and modern systems, creating barriers to achieving cohesive digital frameworks. Cybersecurity emerged as a critical concern due to the increased vulnerability of digital supply chains to cyber threats, necessitating robust and proactive security measures. Organizational resistance, driven by employee apprehensions about job displacement and technological unfamiliarity, highlighted the need for effective change management practices, including clear communication and training. Financial constraints, especially for small and medium-sized enterprises (SMEs), underscored the difficulty of justifying the substantial investments required for advanced digital technologies. Despite these challenges, the study identified significant opportunities associated with digitalization, including enhanced operational efficiency, improved visibility, predictive analytics, and better customer satisfaction. Digital tools were found to streamline processes, reduce manual intervention, and provide real-time insights into supply chain performance, thus facilitating more informed decision-making and swift responses to disruptions. The accelerated adoption of digital technologies during the COVID-19 pandemic demonstrated their essential role in enhancing supply chain resilience and agility. Additionally, the integration of sustainability goals through digitalization supported resource optimization and waste reduction, aligning with broader corporate social responsibility objectives. The findings suggest that while the path to digital transformation is complex, the benefits of improved efficiency, decision-making, customer satisfaction, and sustainability present compelling incentives for organizations to invest in and embrace digital supply chain solutions.

This study explores the role of stakeholder engagement in enhancing supply chain sustainability within the renewable energy sector. Through a qualitative research approach, including in-depth interviews with key stakeholders such as government agencies, industry associations, renewable energy companies, community groups, and environmental organizations, the research reveals the complexity and significance of effective stakeholder engagement. Stakeholders highlighted diverse motivations, including environmental, social, economic, and regulatory concerns, driving their participation. The study underscores the importance of tailored engagement strategies that recognize stakeholder heterogeneity and address specific needs and expectations. Collaborative approaches, such as public-private partnerships and multi-stakeholder initiatives, were identified as crucial for pooling resources, sharing knowledge, and addressing common challenges. However, challenges related to power imbalances, conflicting interests, and communication barriers were also noted. Government policies and regulatory frameworks were found to play a pivotal role in shaping stakeholder engagement practices and sustainability outcomes. Regulatory uncertainty and inconsistency were cited as significant concerns that could undermine sustainability initiatives. Community engagement emerged as a critical factor, with local communities often directly impacted by renewable energy projects. Meaningful engagement, including consultation and benefit-sharing mechanisms, is essential for building trust and securing social acceptance. Emotional intelligence and marketing strategies were recognized as important tools for effective stakeholder engagement, emphasizing the role of empathy, active listening, and clear communication. The findings of this study highlight the need for a holistic and integrated approach to stakeholder engagement and supply chain sustainability in the renewable energy sector. By addressing diverse stakeholder needs, fostering collaboration, and aligning policies with sustainability goals, stakeholders can work together to accelerate the transition towards a more sustainable energy future.

Xinjiang, as a climate-sensitive region in northwest China, holds significant importance in studying extreme weather events for agricultural production and socioeconomic development. Based on data from 52 meteorological stations and 23 extreme climate indicators in Xinjiang from 1960 to 2021, the 5a moving average, linear trend estimation, climate tendency rate, and GIS spatial analysis methods are used to analyze the distribution and change characteristics of extreme climate. The results revealed that from 1960 to 2021, TXx, TNx, TXn, TNn, FD, ID, TN10p, TX10p, and WSDI showed a significant upward trend, while SU, TR, TN90p, TX90p, and CSDI showed a significant downward trend. What is more, the range of changes in the extreme temperature indexes from 1990 to 2021 is higher than that of 1960 to 1989. The high-value areas of extreme indexes are primarily concentrated in the northern part, while the high-value areas of cold event indexes are mainly distributed in the southern part. The upward/downward trends all accounting for over 80.00% of the entire region. The Rx1day, Rx5day, PRCPTOT, R95p, R99p, R10, R20, and R25 showed a significant growth trend from 1960 to 2021, and the range of change in the extreme precipitation indexes from 1990 to 2021 was lower than that from 1960 to 1989. Moreover, their high-value areas and high climate tendency areas are mainly concentrated in the northern and western parts of Xinjiang, with upward trends all accounting for over 71.00% of the entire region. The research results provide theoretical foundations for formulating climate risk strategies in the northwest region of China.

Social media giants like Facebook are struggling to keep up with fake news, in the light of the fact that disinformation diffuses at lightning speed. For example, the COVID-19 (i.e. Coronavirus) pandemic is testing the citizens' ability to distinguish real news from falsifying facts (i.e. disinformation). Cyber-criminals take advantage of the inability to cope with fake news diffusion on social media platforms. Fake news, crafted as a means to manipulate readers to perform various malicious IT activities. However, no previous study has investigated the strategies used to create fake news on social media. Therefore, we have analysed five data-sets that contain online news articles (i.e. both fake and legitimate news) to investigate strategies of crafting fake news on social media platforms. Our study findings revealed a threat model understanding strategies of crafting fake news which may highly likely diffuse on social media platforms.

Insect herbivores have a wide range of life cycles and feeding habits, making them extremely diverse. With their host plants, they form close relationships and suppress their defense mecha-nisms. Molecular elicitors are the key bio-elements in detection and recognition of attacking enemies in tissue consumption. Insect oral secretion, frass, and fluid of egg deposition contain bio-logical active molecules called herbivore-associated elicitors (HAEs) are recognized by pattern recognition receptors (PRRs). However, in insect herbivores, little is known about the molecular basis of signal transduction and regulation of plant resistance. Many plants distinguish insect feeding from wounding by HAEs presenting in their oral secretions (OS) and induce local and systemic responses against arthropod feeding. PRRs perceive HAEs in the oral secretion of cater-pillars in a species-specific manner to elicit exclusive defense responses. HAEs-PRRs interactions induce plant resistance by reprogramming plant metabolism and transcriptional machinery. Quantitative, timely, and coordinated plant response initiate early signalling events including Ca+2, reactive oxygen species (ROS) and mitogen-activated protein kinases (MAPKs). We have discussed how early signalling cascades converge into the accumulation of phytohormones that regulate down-stream special metabolites against herbivores. In this review, we have drawn a hypothetical model of PPRs-HAEs mediated induced responses in plants and discussed how PRRs-HAEs interactions based on molecular mechanism that elicit short- and long-term induced defenses in plants. The identification of plant target insect herbivore PRRs-HAEs interactions will help to explore the fundamental molecular mechanisms of host manipulation and may generate prospects to develop novel pest resistance strategies.

This paper presents a novel sensor for the detection and characterization of regions of air turbulence that would be of use to improve UAV stability in bad weather. It consists of a combined Schlieren imager and a Radar Acoustic Sounding System (RASS) to produce dual modality “images” of air movement within the measurement volume. The ultrasound modulated Schlieren imager consists of a strobed point light source, parabolic mirror, light-block and camera which are controlled by two laptops. It provides a fine scale projection of the acoustic pulse modulated air turbulence through the measurement volume. The narrow beam 40 kHz/ 17 GHz RASS produces spectra based on Bragg enhanced Doppler radar reflections from the acoustic pulse as it travels. Tests using artificially generated air vortices showed some disruption of the Schlieren image and of the RASS spectrogram. This should allow the higher resolution Schlieren images to identify the turbulence mechanisms that are disrupting the RASS spectra.

This study explores the barriers to adopting green supply chain practices from the perspective of industry leaders. By conducting qualitative interviews with key decision-makers in various sectors, the research uncovers the complexities and challenges faced in integrating sustainable practices into supply chain operations. The findings highlight significant obstacles such as cost implications, lack of regulatory support, technological limitations, and resistance to change within organizations. Additionally, the study reveals that while there is a growing awareness and commitment towards sustainability, practical implementation remains fraught with difficulties. The insights gained from industry leaders provide a nuanced understanding of the multifaceted nature of these barriers, offering valuable guidance for businesses and policymakers aiming to promote greener supply chains.

Trust plays a pivotal role in supplier-buyer relationships, influencing decision-making, collaboration dynamics, and organizational performance. This qualitative study explores the multifaceted nature of trust in supplier-buyer relationships across diverse industries. Through in-depth interviews and thematic analysis, the study examines how trust develops, evolves, and impacts business interactions. Participants from various organizational settings provided insights into the cognitive, affective, and behavioral dimensions of trust, highlighting its role as a strategic asset in fostering resilience and competitive advantage. Findings underscored the importance of transparency, communication, and shared values in building trust, with emotional bonds and cultural compatibility enhancing partnership longevity and mutual commitment. Challenges such as asymmetrical power dynamics, economic uncertainties, and regulatory pressures were identified as barriers to trust, necessitating proactive strategies and ethical standards to mitigate risks. Practical implications include promoting open communication, aligning incentives, and cultivating a culture of trust within supply chains to enhance operational efficiencies and innovation. Future research could explore the impact of digitalization, technological advancements, and cross-cultural differences on trust dynamics, further enriching our understanding of effective relationship management in global markets. By addressing these complexities and leveraging trust as a foundational element, organizations can navigate uncertainties and capitalize on opportunities for sustainable growth and collaboration in dynamic business environments.

This study investigates green logistics strategies adopted by businesses to enhance sustainability within their supply chains, particularly focusing on reducing carbon footprints and environmental impacts associated with transportation and distribution activities. Through qualitative analysis and interviews with supply chain managers, industry experts, and sustainability officers, this research provides insights into motivations, strategies, challenges, and benefits related to green logistics practices. Key findings highlight the critical role of aligning green logistics with corporate sustainability goals. Advanced technologies such as telematics, GPS tracking, and data analytics are instrumental in optimizing transportation routes, reducing fuel consumption, and minimizing emissions. Additionally, strategies like using eco-friendly vehicles, energy-efficient warehouse operations, and implementing reverse logistics are identified as effective means to mitigate environmental impacts. Collaboration and partnerships with suppliers, logistics providers, and stakeholders are essential for sharing best practices and fostering joint initiatives. Despite benefits such as cost savings and enhanced corporate reputation, challenges include high initial investments, the absence of standardized metrics for environmental impact, and regulatory complexities. However, regulatory compliance also acts as a driver for green logistics adoption and presents opportunities for improving sustainability performance. The integration of sustainability goals with logistics strategies underscores the interdisciplinary nature of sustainable supply chain management. This holistic approach encompasses aspects of entrepreneurship, emotional intelligence, marketing, and supplier relationship management.

The dynamic and unpredictable nature of modern supply chains necessitates the development of resilient systems capable of withstanding various disruptions. This qualitative study examines the impact of collaborative practices on supply chain resilience, providing an in-depth analysis of their contributions to the robustness and adaptability of supply chains. Through extensive interviews with industry professionals, including supply chain managers, logistics coordinators, and strategic planners, the study identifies key collaborative practices—such as information sharing, joint decision-making, and coordinated response strategies—that significantly enhance resilience. These practices facilitate proactive risk management, improve response times during disruptions, and foster innovation through shared knowledge and resources. Thematic analysis of the collected data reveals that strong relationships among supply chain partners and integrated approaches that leverage each participant's strengths are crucial for effective risk mitigation and recovery. Additionally, the study underscores the role of technology in enabling real-time information sharing and decision-making, which are essential for effective collaboration. The findings highlight the importance of investing in robust collaborative networks and adopting supportive technologies to enhance communication and coordination. This research contributes to the existing body of knowledge by offering a nuanced understanding of how strategic implementation of collaborative practices can build more resilient supply chains. It provides practical recommendations for businesses seeking to improve their resilience, emphasizing the qualitative aspects of collaboration and its impact on supply chain management. Overall, this study presents a comprehensive exploration of how collaboration can bolster supply chain resilience, offering valuable insights for practitioners and scholars focused on creating stable and sustainable supply chain operations in the face of growing uncertainties.

This qualitative investigation delves into the intricate interplay of cultural factors within supply chain integration, aiming to elucidate how diverse cultural dimensions shape communication dynamics, decision-making processes, and collaborative efforts among global supply chain practitioners. Employing a phenomenological approach, the study explores the lived experiences and subjective perceptions of supply chain managers and professionals, providing nuanced insights into the profound impact of national culture, organizational culture, digital technologies, and sustainability considerations on supply chain operations. Key findings highlight the significant influence of national culture, as conceptualized by Hofstede's cultural dimensions, on supply chain interactions. These dimensions—such as power distance, individualism versus collectivism, uncertainty avoidance, and masculinity versus femininity—play crucial roles in shaping how individuals perceive authority, manage risks, negotiate agreements, and engage in collaborative practices across diverse cultural contexts. Cultural norms and values deeply influence both intra-organizational dynamics and inter-organizational relationships within global supply chains. Organizational culture emerges as a pivotal determinant of supply chain integration success. Cultures characterized by transparency, trust, inclusivity, and a commitment to continuous improvement create environments conducive to effective cross-border collaboration. Conversely, organizations with conflicting or ambiguous cultural norms face challenges in aligning goals, fostering mutual understanding, and maintaining open communication channels with international partners. The study underscores the transformative role of digital technologies in enhancing supply chain management practices. Technologies such as blockchain, artificial intelligence, and the Internet of Things improve supply chain visibility, optimize operations, and enhance decision-making processes, strengthening resilience against disruptions. The adoption and integration of these technologies depend on organizational readiness, technological capabilities, and cultural acceptance within supply chain networks. Cultural factors influence the adoption pace, implementation strategies, and utilization patterns of digital technologies, emphasizing the need for strategic alignment between technological investments and cultural norms to maximize their potential benefits. Furthermore, sustainability considerations are critical in shaping cultural values and priorities within supply chain networks. Organizations increasingly recognize the importance of environmental sustainability, ethical sourcing practices, and corporate social responsibility in shaping their reputations, stakeholder relationships, and long-term business goals. Cultural factors significantly influence organizations' approaches to sustainability, guiding their strategic decisions and operational practices.

In today's globalized economy, supply chain disruptions present significant challenges, impacting businesses' operational continuity and efficiency. This study delves into the ways businesses navigate these disruptions, with a particular emphasis on qualitative insights into risk management practices. The complexity and interconnectivity inherent in modern supply chains make them vulnerable to a broad spectrum of disruptions, ranging from natural disasters and geopolitical conflicts to technological failures and pandemics. Effective supply chain risk management requires a structured approach to identifying potential risks, evaluating their likelihood and potential impact, and formulating robust mitigation strategies. Employing a qualitative research methodology, this study gathers in-depth insights from semi-structured interviews with supply chain managers, industry experts, and executives. The findings underscore the necessity of proactive risk identification and comprehensive assessment processes. Advanced technologies, including artificial intelligence (AI), the Internet of Things (IoT), and blockchain, are highlighted as crucial tools for enhancing visibility and responsiveness within supply chains. Strategies such as diversifying suppliers and maintaining safety stock emerge as vital components of risk mitigation, ensuring supply continuity in the face of disruptions. Strong relationships with suppliers are pivotal, facilitating better information sharing and collaborative problem-solving. Leadership commitment to risk management and fostering a culture of resilience within organizations is also critical. Training programs and simulation exercises are identified as effective means of preparing employees to handle disruptions. Furthermore, adherence to regulatory compliance and a focus on sustainability are integral to maintaining long-term stability and reducing the risk of future disruptions.

The rapid evolution of technology has profoundly reshaped supply chain operations across various industries, compelling organizations to adapt swiftly to maintain competitive advantage. This qualitative study delves into the adaptive strategies that organizations employ to navigate the intricate landscape of digital transformation within their supply chains. By conducting comprehensive in-depth interviews with key stakeholders, including supply chain managers, technology officers, and operational staff, this research aims to uncover the multifaceted challenges, opportunities, and best practices associated with integrating digital technologies into supply chain operations. The findings of this study reveal that successful digital transformation in supply chains hinges on several critical factors. Leadership plays a pivotal role in steering the organization through the complexities of technological change, emphasizing the need for visionary and adaptive leaders who can drive strategic initiatives. Organizational culture, characterized by a willingness to embrace change and foster innovation, emerges as a significant enabler of digital transformation. Additionally, strategic planning and a clear roadmap are essential for aligning technological initiatives with business objectives and ensuring seamless integration. Employee training and development are identified as crucial elements in overcoming resistance to change and enhancing digital literacy among the workforce. The study highlights the importance of continuous learning and skill development programs to equip employees with the necessary competencies to leverage new technologies effectively. Furthermore, the research underscores the significance of collaboration and communication across different levels of the organization to foster a cohesive approach to digital transformation. Challenges such as data security concerns, substantial financial investments, and the complexity of integrating diverse technologies are also explored. The insights derived from the interviews provide a nuanced understanding of how organizations can address these challenges by adopting robust cybersecurity measures, securing adequate funding, and leveraging modular and scalable technological solutions. This research contributes valuable empirical insights into the digital transformation journey of supply chain operations, offering practical recommendations for practitioners and scholars. The implications of this study are far-reaching, providing a framework for organizations to navigate the digital landscape successfully. Key recommendations include fostering a culture of innovation, investing in leadership development, prioritizing employee training, and adopting a strategic and holistic approach to digital transformation.

The present qualitative study delves into the sustainability practices within supply chain management, emphasizing insights garnered from leading global firms. With sustainability becoming an imperative across industries, understanding how top firms integrate sustainable practices within their supply chains offers valuable lessons for broader implementation. The investigation draws on interviews, case studies, and existing literature to identify key strategies, challenges, and outcomes associated with sustainable supply chain management. Findings reveal a comprehensive approach involving the adoption of green technologies, ethical sourcing, and stakeholder engagement, all of which contribute to enhanced environmental and social performance. The discussion highlights the critical role of leadership, innovation, and collaboration in driving sustainability, underscoring the need for continuous improvement and adaptation. Ultimately, the study concludes that while significant progress has been made, ongoing efforts and commitment are essential for achieving long-term sustainability goals in supply chain management.

Supplier Relationship Management (SRM) is a critical aspect of supply chain management, particularly in today's dynamic and interconnected business environment. This qualitative research study explores SRM practices within the context of supply chain dynamics, aiming to understand how organizations manage their supplier relationships to achieve strategic objectives. Through semi-structured interviews, document analysis, and participant observation, key themes emerge, including collaboration, trust, risk management, performance measurement, digital technology integration, sustainability, cultural alignment, supplier development, strategic alignment, emotional intelligence, and marketing perspectives. The findings underscore the importance of collaboration and trust in fostering strategic partnerships with suppliers, mitigating risks, and enhancing supply chain resilience. Effective risk management practices, performance measurement systems, and digital technology integration are essential for improving transparency, efficiency, and responsiveness in SRM. Sustainability considerations highlight the need for aligning SRM practices with corporate social responsibility goals and stakeholder expectations. Cultural alignment, supplier development programs, strategic alignment, emotional intelligence, and marketing perspectives further enrich the understanding of how organizations navigate their supplier relationships. This study contributes to the body of knowledge on SRM by providing empirical insights into the practices, challenges, and opportunities associated with managing supplier relationships in dynamic supply chains. The findings offer valuable guidance for practitioners and policymakers seeking to enhance their SRM practices and achieve competitive advantage in today's complex business landscape.

This qualitative research explores the impact of digital transformation on supply chain collaboration, delving into its implications for organizational dynamics, processes, and outcomes. Through in-depth interviews with key stakeholders in diverse industries, insights are gathered into how digital technologies reshape collaboration within supply chains. Findings reveal a shift towards greater connectivity, visibility, and agility enabled by digital platforms and ecosystems, fostering innovation and value creation. However, challenges such as data security, organizational silos, and trust issues hinder the realization of collaborative potential. The study underscores the importance of embracing digital technologies, fostering a collaborative culture, and prioritizing trust and transparency to unlock the full benefits of digital collaboration. Moving forward, future research should focus on exploring evolving dynamics, identifying best practices, and developing frameworks for effective implementation in diverse organizational contexts. By leveraging digital transformation, organizations can enhance their supply chain capabilities, strengthen competitiveness, and drive sustainable growth in an interconnected, digitalized world.

This qualitative study investigates the adoption of Lean Principles in Supply Chain Management (SCM), aiming to explore the motivations, challenges, and outcomes associated with Lean implementation across diverse organizational contexts. Through semi-structured interviews and thematic analysis, insights were gleaned from stakeholders involved in SCM processes, revealing the critical role of organizational culture, leadership commitment, and strategic alignment in driving successful Lean initiatives. The findings underscore the importance of fostering a culture of continuous improvement, where employees are empowered to proactively identify and address inefficiencies. Leadership emerged as pivotal in setting the tone, providing resources, and championing Lean initiatives, while strategic alignment ensured integration with broader organizational goals and objectives. Operational practices and processes were central, highlighting the need for customization and contextual adaptation in Lean implementation. Despite the potential benefits, the outcomes and impact of Lean adoption varied depending on factors such as organizational maturity and industry context. The study also revealed broader cultural and organizational changes catalyzed by Lean adoption, fostering innovation, collaboration, and adaptability. In summary, this study contributes to our understanding of Lean adoption in SCM, offering practical insights for organizations seeking to enhance efficiency and competitiveness in today's dynamic business landscape.

Supply chain risk management (SCRM) is a critical aspect of contemporary business operations, necessitated by the complex and interconnected nature of global supply chains. This qualitative research delves into the intricacies of SCRM through in-depth interviews with industry experts, aiming to unravel the multifaceted nature of supply chain risks and the strategies employed for mitigation. Key themes emerged, including the diverse sources of risks encompassing operational, financial, environmental, and geopolitical factors, highlighting the need for a comprehensive approach to risk management. Challenges such as limited visibility, resource constraints, and organizational silos were identified, underscoring the importance of addressing these barriers to enhance SCRM effectiveness. Strategies for risk mitigation encompassed technological investments for enhanced visibility and predictive capabilities, collaboration and information sharing among supply chain partners, and the integration of sustainability principles into risk management practices. Leadership, organizational culture, and continuous learning emerged as critical factors in driving effective SCRM practices, emphasizing the need for proactive and adaptable approaches to navigate evolving risks. Overall, this study contributes to the existing body of knowledge on SCRM by providing valuable insights for practitioners and academics, and underscores the importance of holistic and proactive approaches to enhance supply chain resilience and agility in today's dynamic business environment.

This study explores the multifaceted role of culture in supply chain collaboration, focusing on how cultural differences shape communication, trust-building, negotiation, conflict resolution, risk management, and ethical standards. Utilizing a qualitative methodology, semi-structured interviews were conducted with 25 supply chain professionals from diverse cultural backgrounds and industries. The findings reveal that high-context cultures favor indirect communication and nuanced information exchange, which can lead to misunderstandings with partners from low-context cultures who prefer direct and explicit communication. Trust-building practices vary significantly, with high uncertainty avoidance cultures emphasizing formal agreements and procedural rigor, while low uncertainty avoidance cultures prioritize personal relationships and demonstrated reliability. Negotiation strategies also diverge, reflecting the underlying values of collectivism versus individualism, impacting the tactics and outcomes of supply chain negotiations. Conflict resolution approaches differ, with high power distance cultures favoring hierarchical and mediated solutions, and low power distance cultures preferring direct and egalitarian methods. The study highlights the need for adaptability to cultural changes and the development of cultural intelligence as essential competencies for managing cross-cultural supply chains. Additionally, cultural differences in risk management approaches and governance mechanisms affect the coordination and resilience of supply chains, while varying ethical standards influenced by cultural norms necessitate culturally sensitive strategies for promoting corporate social responsibility. The insights gained from this research underscore the importance of understanding and leveraging cultural differences to build stronger, more productive supply chain relationships, contributing to the broader literature on culture and supply chain management and offering practical implications for enhancing global supply chain collaboration.

Supply chain disruptions pose significant challenges to organizations, highlighting the critical importance of resilience in contemporary supply chains. This qualitative research explores the implications of supply chain disruptions on organizational resilience, drawing insights from interviews with supply chain managers and executives across various industries. The study identifies key factors that contribute to resilience, including agility, collaboration, risk management, strategic planning, technology integration, leadership, and organizational culture. Through thematic analysis, the research elucidates how these factors interact to enable organizations to manage and recover from disruptions effectively. Findings underscore the importance of agility in adapting to changing circumstances, collaboration with stakeholders to coordinate responses, and proactive risk management to anticipate and mitigate disruptions. Strategic planning and technology integration emerge as vital enablers of resilience, along with effective leadership and a resilient organizational culture that fosters adaptability and continuous improvement. The implications of supply chain disruptions extend beyond operational and financial impacts to include reputational and relational dimensions, emphasizing the importance of transparent communication and stakeholder engagement. The practical insights offered by this study provide guidance for organizations seeking to enhance their resilience and ensure continuity of operations in an increasingly complex and dynamic supply chain environment.

This study investigates the impact of information sharing on supply chain resilience by exploring the experiences and insights of supply chain professionals through qualitative research. Information sharing has become increasingly recognized as a vital component in enhancing the ability of supply chains to anticipate, respond to, and recover from disruptions. Through semi-structured interviews with 22 supply chain professionals across various industries, the study delves into the mechanisms through which information sharing influences supply chain resilience, the challenges faced, and the role of enabling factors such as technology and organizational culture. The findings reveal that effective information sharing enhances supply chain visibility, coordination, and adaptability. Enhanced visibility allows supply chain partners to monitor real-time operational data, facilitating early detection of potential disruptions. Improved coordination enables better alignment of activities, reducing inefficiencies and mitigating the bullwhip effect. Adaptability is bolstered through the timely exchange of information, allowing for rapid adjustments to changing conditions. However, the study also identifies significant barriers to effective information sharing, including concerns about data security, competitive advantage, and trust among partners. Trust and strong relationships emerge as critical factors for successful information sharing, highlighting the need to build and maintain trust to facilitate open communication. The role of technology is emphasized, with digital platforms, blockchain, and the Internet of Things (IoT) identified as key enablers of efficient and secure information exchange. The study concludes that fostering a supportive organizational culture and leadership commitment to transparency and collaboration, along with tailoring information-sharing strategies to specific supply chain contexts, is essential for enhancing supply chain resilience. This research contributes to the understanding of the impact of information sharing on supply chain resilience and provides practical insights for organizations aiming to strengthen their resilience in an increasingly complex global business environment.

The study investigates the influence of power dynamics on supply chain decision-making processes through a qualitative lens, aiming to understand how various forms of power impact interactions, relationships, and strategic outcomes within supply chains. Using semi-structured interviews with supply chain managers and executives from diverse industries, the research explores the multifaceted nature of power, identifying key sources such as economic leverage, expertise, resource control, and network centrality. Findings reveal that power dynamics significantly shape decision-making by determining negotiation outcomes, governance structures, and operational efficiencies. Economic power, often exercised by larger firms, enables them to dominate negotiations and impose favorable terms, creating pressures on smaller partners and potentially leading to conflicts. Expertise and resource control allow firms with specialized knowledge or unique inputs to influence product development and process innovation, further dictating supply chain configurations. The study differentiates between coercive and non-coercive power strategies, showing that while coercive power enforces compliance, it can erode trust and collaboration. Non-coercive power, on the other hand, promotes positive relationships through incentives and collaborative approaches, fostering trust and alignment of supply chain objectives. Governance structures imposed by dominant firms often reflect their strategic priorities but can burden less powerful partners, highlighting the need for balanced oversight. Power also plays a crucial role in risk management, resilience, sustainability, and innovation within supply chains, with digitalization introducing new dimensions of influence. The research underscores the importance of balanced and equitable power dynamics to enhance cooperation, resilience, and innovation in supply chains. These insights provide valuable implications for practitioners and scholars in developing more effective and adaptive supply chain strategies.

This qualitative study explores sustainable procurement practices and supplier selection criteria, delving into the complexities, challenges, and opportunities of integrating sustainability considerations into procurement decisions. Through in-depth interviews with procurement professionals from diverse industries, the research uncovers key themes such as the multifaceted nature of sustainable procurement criteria, the challenge of assessing and managing suppliers' sustainability performance, the importance of collaboration and communication, and the influence of regulatory and market pressures. Findings reveal that sustainable procurement involves a comprehensive approach that considers environmental, social, and ethical factors alongside traditional criteria like cost and quality. Assessing suppliers' sustainability performance emerges as a significant challenge, necessitating robust assessment processes and technological solutions to enhance transparency and traceability. Collaboration and communication with suppliers are identified as critical enablers of sustainable procurement, fostering trust and mutual understanding. Regulatory mandates and market demands drive organizational commitments to sustainability, shaping supplier selection criteria and procurement strategies. Despite challenges, sustainable procurement offers benefits such as enhanced risk management, cost savings, innovation, and reputation enhancement. Overall, sustainable procurement represents a strategic approach that contributes to positive environmental and social outcomes, supporting a more sustainable and equitable future for organizations and society.

This study investigates the pivotal role of leadership in driving sustainable supply chain initiatives (SSCI), highlighting the multifaceted ways through which leaders influence the successful integration and implementation of sustainability practices within supply chains. Using a qualitative approach, the research involved semi-structured interviews with leaders and managers from diverse industries, complemented by document analysis and thematic analysis to capture the complexities of leadership in SSCI. The findings reveal that visionary leadership, characterized by a clear and compelling sustainability vision, plays a crucial role in aligning organizational goals with sustainable practices, inspiring collective action, and fostering a shared commitment to long-term environmental and social objectives. Stakeholder engagement emerged as a critical factor, with leaders who prioritize open communication and collaboration successfully building trust, leveraging expertise, and co-creating innovative solutions to sustainability challenges. Additionally, the study highlights the importance of fostering a culture of innovation, where leaders support experimentation, risk-taking, and the adoption of new technologies and processes that enhance sustainability. Ethical leadership, emphasizing integrity, transparency, and accountability, is identified as essential for gaining stakeholder support and reinforcing the legitimacy of SSCI. Furthermore, the integration of sustainability into organizational culture, driven by leadership, is crucial for aligning individual and organizational behaviors with sustainability goals. The ability of leaders to navigate challenges, adapt to global supply chain complexities, and utilize robust sustainability metrics is also emphasized as key to sustaining SSCI. The study concludes that effective leadership is integral to the success of SSCI, offering valuable insights for organizations aiming to enhance their sustainability performance and contributing to the broader understanding of leadership’s role in sustainable supply chain management.

This ethnographic study investigates the cross-cultural challenges encountered in global supply chains, focusing on communication barriers, diverse business practices, trust-building, ethical and legal standards, and cultural competence. By embedding within the day-to-day operations of multinational corporations and conducting in-depth interviews with supply chain professionals, the research provides a nuanced understanding of the cultural dynamics that impact global supply chain management. The findings highlight that effective communication goes beyond language proficiency, requiring an understanding of varying communication styles and contextual nuances. Business practices shaped by cultural values such as power distance and uncertainty avoidance necessitate adaptive management strategies that balance local norms with global standards. Trust and relationship-building are critical, particularly in cultures where personal relationships underpin business transactions, demanding long-term investment in relationship-building activities. Ethical and legal standards vary significantly across regions, presenting challenges that require a nuanced approach to global governance. The study underscores the importance of cultural competence as a critical skill for supply chain professionals, enabling them to bridge cultural gaps and foster productive collaborations. Sustainability efforts, entrepreneurship, and innovation are also influenced by cultural factors, highlighting the need for culturally sensitive strategies. Emotional intelligence is identified as essential for managing cross-cultural interactions, with participants demonstrating high emotional intelligence more effectively navigating the emotional and social complexities of cross-cultural communication. The use of technology in managing cross-cultural challenges is acknowledged, but the findings suggest that it must be complemented by cultural competence. Overall, the study provides valuable insights for companies seeking to enhance their cross-cultural effectiveness, emphasizing the importance of cultural competence, communication, and relationship-building in achieving sustainable success in global supply chains.

This qualitative research study delves into the intricate dynamics of how organizations adapt to supply chain disruptions during crises, offering profound insights into the strategies, practices, and challenges encountered in enhancing supply chain agility. Through in-depth interviews with supply chain managers across diverse industries, key themes such as proactive risk management, technological integration, collaboration with supply chain partners, and adaptive leadership have emerged as crucial determinants of agility and resilience. Additionally, the study highlights the significance of organizational culture, effective communication, and external factors such as regulatory requirements and market dynamics in shaping supply chain agility. By embracing a holistic approach that integrates these multifaceted factors, organizations can bolster their capacity to anticipate, detect, and respond to disruptions, thereby maintaining or enhancing overall performance even in the face of uncertainty and complexity. The insights gleaned from this research are poised to inform theory development, guide managerial practice, and influence policy-making in the realm of supply chain management, equipping organizations with the knowledge and tools needed to navigate future disruptions successfully.

This qualitative research study explores the multifaceted impacts of digital transformation on supply chain processes within contemporary business environments. Through in-depth interviews with industry professionals, the study investigates the implications of digitalization for visibility, collaboration, resilience, and innovation within supply chains. The findings highlight the opportunities presented by digital technologies for enhancing operational efficiency, mitigating risks, and creating value across supply chain networks. However, the study also underscores the challenges and barriers that organizations face in their digital transformation journey, including integration complexity, data security, and organizational culture. The research emphasizes the importance of strategic investments in digital capabilities, change management, and organizational culture to capitalize on the opportunities presented by digital transformation while addressing the associated challenges. By doing so, organizations can build agile, resilient, and competitive supply chains capable of thriving in an increasingly digitalized and interconnected world.

In today's globalized business environment, multinational corporations (MNCs) face significant challenges in achieving and sustaining effective supply chain integration across diverse cultural contexts. This qualitative research explores the influence of cultural factors on supply chain integration within MNCs, employing in-depth interviews and thematic analysis to uncover key insights. Findings reveal the complex interplay between culture and supply chain practices, highlighting challenges related to cross-cultural communication, trust-building, decision-making, and organizational culture alignment. However, the study also identifies opportunities for leveraging cultural diversity as a source of competitive advantage, emphasizing the importance of cultural intelligence and cross-cultural competence for supply chain professionals. The implications of the research extend to managerial practice, suggesting the development of culturally sensitive strategies for supply chain integration and investment in cultural training and development programs. Moreover, the study underscores the need for a holistic approach to supply chain integration that considers not only technical and operational aspects but also cultural and social dimensions. While the research offers valuable insights, limitations such as the qualitative nature of the study and the focus on supply chain managers' perspectives should be considered. Future research could address these limitations and explore the interdependencies among various contextual factors to enhance our understanding of cultural influences on supply chain integration in MNCs.

Ethical sourcing practices play a pivotal role in addressing price inflation within renewable energy supply chains. This qualitative research investigates the multifaceted impacts of ethical sourcing, drawing insights from interviews with key stakeholders in the renewable energy sector. The study reveals that ethical sourcing enhances supply chain transparency, traceability, and resilience by mitigating risks associated with unethical practices such as labor exploitation and environmental degradation. Fair trade initiatives contribute to economic stability and reduce price volatility by ensuring fair compensation for producers and workers, fostering long-term relationships, and reinvesting premiums into community development projects. Sustainable sourcing practices align with consumer preferences for eco-friendly products, reduce the demand for virgin resources, and promote regulatory compliance and incentives, thereby stabilizing costs and reducing environmental impact. Socially responsible companies that prioritize fair labor practices and community support experience fewer disruptions and benefit from a more stable and productive workforce. Entrepreneurship and emotional intelligence among leaders drive the adoption and successful implementation of ethical sourcing practices, enhancing brand reputation, consumer trust, and market competitiveness. Despite challenges, such as higher implementation costs and supplier resistance, the long-term benefits of ethical sourcing outweigh the initial costs and contribute to sustainable supply chains. Collaboration, consumer education, and effective regulation are essential for promoting ethical sourcing across the renewable energy sector.

This qualitative research explores the influence of Corporate Social Responsibility (CSR) on supply chain sustainability within the renewable energy sector. Through a comprehensive review of existing literature, key themes and patterns are identified, shedding light on the complex dynamics and interrelationships inherent in CSR practices and their impact on supply chain sustainability. The findings highlight the critical role of CSR in driving environmental sustainability, social equity, economic viability, governance mechanisms, and technological innovation across renewable energy supply chains. Environmental sustainability emerges as a priority, with CSR initiatives focusing on reducing carbon emissions, promoting clean energy technologies, and adopting sustainable sourcing strategies. Social equity is emphasized through stakeholder consultation, transparent decision-making, and investments in community development. Economic viability is addressed through considerations of brand reputation, financial performance, and regulatory compliance. Governance mechanisms and regulatory frameworks play a crucial role in shaping CSR practices, with collaborative partnerships and policy advocacy driving industry-wide change. Technological innovation, particularly the integration of blockchain, IoT, and AI, enhances transparency, traceability, and accountability in supply chains. The study concludes by discussing theoretical implications, practical insights, limitations, and avenues for future research, highlighting the importance of CSR in promoting sustainable development in the renewable energy sector.

The renewable energy sector plays a pivotal role in addressing climate change and achieving sustainable development goals. However, the sector faces challenges related to price inflation and supply chain disruptions, which can impede its growth and resilience. This qualitative research explores supply chain resilience strategies adopted by companies in the renewable energy sector to mitigate the impact of price inflation and disruptions. Through semi-structured interviews with key industry stakeholders, the study identifies several key themes. Supplier diversification emerges as a crucial strategy for mitigating risks associated with geopolitical tensions and trade restrictions. Inventory management plays a pivotal role in ensuring continuity in operations amidst supply chain disruptions, with a focus on optimizing inventory levels of critical components. The adoption of digital technologies offers significant potential for enhancing supply chain visibility, transparency, and responsiveness, although integration challenges remain. Collaboration and partnerships within the industry are essential for sharing resources, knowledge, and best practices, fostering innovation and collective problem-solving. Sustainable practices are integral to supply chain resilience, aligning with broader industry trends towards environmental stewardship and social responsibility. Overall, the findings highlight the multifaceted nature of supply chain resilience in the renewable energy sector and the interconnectedness of various strategies and practices. Moving forward, companies must adopt a proactive and adaptive approach to supply chain management, integrating these strategies and practices into their operations to navigate uncertainties and drive sustainable growth. This study contributes to the understanding of supply chain resilience in the renewable energy sector and provides valuable insights for industry stakeholders, policymakers, and researchers.

This study focuses on the impact of collaboration on reducing price inflation in renewable energy supply chains. The study utilises in-depth interviews and theme analysis to reveal the complex dynamics of collaboration among stakeholders and the resulting implications for addressing difficulties in the renewable energy sector. Trust is a key factor in successful collaboration, whereas legal frameworks and policy incentives are important in influencing collaborative activities. Collaborative procurement, cooperative research and development, strategic alliances, and collaborative supply chain management are recognised as crucial measures for decreasing expenses, promoting innovation, and improving resilience in renewable energy supply chains. Nevertheless, in order to achieve successful collaboration, it is necessary to overcome obstacles such as lack of trust, uncertainty in regulations, and competitive dynamics. Creating a cooperative environment that prioritises common objectives, openness, and reciprocal advantages is crucial for fully harnessing the potential of renewable energy supply chains in promoting sustainable energy transitions. The report provides practical insights and recommendations for policymakers, industry professionals, and academics who aim to encourage collaboration and reduce price inflation in renewable energy supply chains.

This qualitative research investigates the effectiveness of certification programs in ensuring supply chain sustainability within the renewable energy sector. Through interviews and content analysis, the study explores stakeholder perceptions, challenges, and impacts of certification initiatives. Findings reveal diverse motivations driving certification adoption, including regulatory compliance, market differentiation, and corporate social responsibility. However, challenges such as greenwashing and limited transparency undermine the credibility and effectiveness of certification programs. Despite these challenges, certification initiatives drive incremental improvements in environmental performance and stakeholder engagement, fostering a culture of continuous improvement and innovation. Multi-stakeholder collaboration and context-specific approaches are essential to address regional disparities and promote sector-wide transformation. Strategies for improvement include strengthening monitoring and enforcement mechanisms, integrating emerging technologies, and aligning certification standards with broader sustainability goals. Overall, certification programs offer a pathway for promoting transparency, accountability, and responsible business practices within the renewable energy supply chain, contributing to the transition towards a more sustainable and resilient energy future.

This qualitative research investigates the intricate relationship between market dynamics and supply chain sustainability in the renewable energy sector. Amidst the global energy transition, renewable energy has emerged as a crucial player in mitigating climate change and fostering sustainable development. However, ensuring the sustainability of renewable energy supply chains presents complex challenges shaped by various market forces. Through semi-structured interviews and thematic analysis, this study explores how policy frameworks, technological innovation, market competition, consumer preferences, and investor demands influence sustainability practices across the renewable energy supply chain. The findings highlight the critical role of supportive policy environments, technological advancements, and stakeholder collaboration in driving sustainability performance and mitigating risks within renewable energy supply chains. Furthermore, the study identifies challenges such as supply chain complexity, regulatory compliance, and stakeholder engagement, underscoring the need for collaborative efforts and multi-stakeholder partnerships. By addressing these challenges and leveraging opportunities, stakeholders can advance sustainability goals, mitigate climate change impacts, and foster a more resilient and equitable renewable energy sector. The research contributes to a deeper understanding of market dynamics and supply chain sustainability in the renewable energy sector, offering insights for policymakers, industry stakeholders, and sustainability practitioners to inform evidence-based decision-making and drive positive change.

The detection of waste plastics in the marine and terrestrial environment using satellite Earth Observation data offers the possibility of large-scale mapping, and reducing on-the-ground manual investigation. In addition, costs are kept to a minimum by utilizing free-to-access Copernicus data. A Machine Learning based classifier was developed to run on Sentinel-1 and -2 data. In support of the training and validation, a dataset was created with terrestrial and aquatic cases by manually digitizing varying landcover classes alongside plastics under the sub-categories of greenhouses, plastic, tyres and waste sites. The trained classifier, including an Artificial Neural Network and post-processing decision tree, was verified using five locations encompassing these different forms of plastic. Although exact matchups are challenging to digitize, the performance has generated high accuracy statistics, and the resulting land cover classifications have been used to map the occurrence of plastic waste in aquatic and terrestrial environments.

This article aims to understand the role of tacit knowledge in call center organizations with the objective of understanding how call center representatives use tacit knowledge in their job roles and functions. Extant literature has focused on explicit knowledge but the research on tacit knowledge is still underdeveloped. The complexities and difficulties of the call center job role and the usage and transfer of knowledge is reviewed. Also, it takes into considerations past literature on tacit knowledge, how these respondents employ tacit knowledge in efficiently handling customers, responding to their queries, and engaging this form of knowledge in problem solving. The article concludes with discussion and implications for call center organizations and responders.

Mate crime is a specific subset of hate crime in which the perpetrator is known to the victim. To date, there is very little research into the perception and experience of mate crime in autism. The aim of the current study was to examine perceptions of friendship and mate crime in autistic adults, using semi-structured interviews. Five adults were interviewed about their experiences of social interactions, friendships and mate crime. Participants described distancing themselves from the ‘disability’ label whilst growing up to avoid condescension and being perceived as vulnerable, whilst learning to camouflage their social difficulties. Feelings of anxiety were associated with socialising, and participants valued relationships that did not place too many overwhelming demands on their time or energy. Finally, all participants had prior experiences of bullying. They understood the concept of mate crime but were unsure as to whether they would be able to identify it in their own lives if it occurred. However they could identify potential support networks in close friends and family. Results highlight the importance of further research into positive and negative aspects of social relationships in autistic adults, and the need to provide support to those who are socially vulnerable.

In some parts of Nigeria, many girls do not attend school, and among those sent to school, many still drop out early. This and other socio-cultural factors affect girls psychologically. There is no doubt that girls need consistent love and tutoring to guide them through the turbulent teen years and beyond. They need a mentor who acts as a friend and a role model. The Mobile-based Mentoring Platform seeks to leverage on mobile technology's affordances to focus on the needs of the girl-child, such as improvement in academic achievement, guidance in career choice, development of self-concept, and esteem. The girl-mentees comments revealed that using the platform provided them frequent access to mentors and access to learning opportunities. The challenges they faced include epileptic internet network, intrusions by parents, and others. Therefore, this paper examined the challenges and benefits of mentoring girls via a mentoring platform.

Breast cancer is a complex and heterogeneous disease that displays diverse molecular subtypes and clinical outcomes. Although it is known that the location of tumors can affect their biological behavior, the underlying mechanisms are not fully understood. In our previous study, we found a differential methylation profile and membrane potential between left (L) and right (R)-sided breast tumors. In this current study, we aimed to identify the ion channels responsible for this phenomenon and determine any associated phenotypic features. To achieve this, experiments were conducted in mammary tumors in mice, human patient samples, and with data from public datasets. The results revealed that L-sided tumors have a more depolarized state than R-ones. We identified a 6-ion channel-gene signature (CACNA1C, CACNA2D2, CACNB2, KCNJ11, SCN3A, and SCN3B) associated with side: L-tumors exhibit lower expression levels than R-ones. Additionally, in silico analyses show that the signature correlates inversely with DNA methylation writers and with key biological processes involved in cancer progression, such as proliferation and stemness. The signature also correlates inversely with patients’ survival rates. In an in vivo mouse model, we confirmed that KI67 and CD44 markers were increased in L-sided tumors and similar tendency for KI67 was found in patient L-tumors. Overall, this study provides new insights into the potential impact of anatomical location on breast cancer biology and highlights the need for further investigation into possible differential treatment options.

Can investing in women’s agriculture increase productivity? This paper argues that it can. We assess climate impacts and gender bias on women’s production in the global South and North and challenge the male model of agricultural development to argue further that women’s farming approaches can be more sustainable. Level-based analysis (global, regional, local) draws on literature review, including authors’ published longitudinal field research in Ghana and the United States. Women farmers are shown to be undervalued and to work harder, with fewer resources, for less compensation; gender bias challenges are shared globally while economic disparities differentiate; breaches of distributive, gender, and intergenerational justices as well as compromise of food sovereignty affect women everywhere. We conclude that investing in women’s agriculture needs more than standard approaches of capital and technology investment. Effective ‘investment’ would include systemic interventions into agricultural policy, governance, education, and industry; be directed at men as well as women; and use gender metrics, e.g. quotas, budgets, vulnerability and impacts assessments, to generate assessment reports and track gender parity in agriculture. Increasing women’s access, capacity, and productivity cannot succeed without men’s awareness and proactivity. Systemic change can increase productivity and sustainability.

Panax notoginseng is a traditional Chinese medicine, and saponins are its main active ingredients. The content of saponins in flower of P. notoginseng is the highest in the whole plant. Minor ginsenosides have stronger pharmacological activity than main ginsenosides, but its content in nature is very low. We can use extracted total saponins from P. notoginseng flower as the substrate to produce minor ginsenosides by biotransformation method. In this study, we used the fungus Talaromyces flavus and its crude enzymes to transform the extracted total saponins of P. notoginseng flower. Through the qualitative and quantitative analysis of the transformation substrates and products, it was found that minor ginsenosides Gyp-XVII, ginsenosides C-Mc1, C-Mx1, F2, Rg3, 20(R)-Rg3, Rk1 and Rg5 were found in the products and the conversion rate of the major saponins in P. notoginseng flower ranged from 44.16 to 55.22%, the yields of the minor ginsenosides ranged from 0.05 to 3.24%. This study provided a good experimental idea, greatly increased the utilization rate of total saponins in P. notoginseng flower, and laid a foundation for promoting the wide application of minor saponins.

Liposomes have been used for several decades for the encapsulation of drugs and bioactives in cosmetics and cosmeceuticals. On the other hand, the use of these phospholipid vesicles in food applications is more recent and has been increasing significantly in the last ten years. Although in different stages of technological maturity - in the case of cosmetics, many products are on the market - processes to obtain liposomes suitable for the encapsulation and delivery of bioactives are highly expensive, especially aiming at scaling-up. Among the bioactives proposed for cosmetics and food applications, vitamins are the most frequently used. Despite the differences between the administration routes (oral for food and mainly dermal for cosmetics), some challenges are very similar (e.g., stability, bioactive load, average size, increase of drug bioaccessibility and bioavailability). In the present work, a systematic review of the technological advancements in the nanoencapsulation of vitamins using liposomes and related processes was performed; challenges and future perspectives were also discussed in order to underline the advantages of these drug loaded biocompatible nanocarriers for cosmetics and food applications.

Insulated Gate Bipolar Transistor (IGBT) may convey high current and sustain high breakdown voltages; it may provide high power control. In a sense, how IGBT demonstrates the capability of power control was not specifically described, and the equivalent bipolar junction transistors (BJT) activated by an applied bias to the insulated gate is intriguing. As seen in Figure 1, IGBT shows an equivalent circuit structure containing two types of BJT, (NPN-type Bipolar transistor and PNP-type Bipolar transistor), which can be modeled as diode-associated transistor. Apparently, as a bias applies to the controlling gate, the channel beneath the gate oxide gets strongly inversed and turns out to be conductive just like what happens on metal-oxide-silicon field effect transistor (MOSFET), which provides necessary igniting currents to both BJTs and thus causes high current gain flowing through them-selves from the bottom. A proposed and renewed formula provides addressing the above scenario and successfully fitting the measured data that forms the characteristic curves. Some parameters in the proposed formula, which includes size and mobility associated constant, threshold voltage, and Early-Voltage-related lambda for MOSFET, explain and explore the underlying physics. IGBT thus enjoy high input impedance and high current gain due to MOSFET (Insulated Gate) and BJT, respectively. This formula combines both merits of MOSFET and BJT in order to fit the measured data. Indeed, the formula intimately fits IGBT electrical characteristic curves, and thus may be qualified and served as a model. The new model is then advisable for designing power integrated circuit to exactly achieve power saving, power control, and power efficiency.

This review critically assesses the body of research about Measles-Mumps-and-Rubella (MMR) vaccine attitudes and uptake in the United Kingdom (UK) over the past 10 years. We searched PubMed and Scopus, with terms aimed at capturing relevant literature on attitudes, uptake, decision-making, and beliefs about the MMR vaccine. Two researchers screened for abstract eligibility and after de-duplication 934 studies were selected. After screening, 40 references were included for full-text review and thematic synthesis by three researchers. We were interested in the methodologies employed, and grouped findings by whether studies concerned: (1) Uptake and Demographics; (2) Beliefs and Attitudes; (3) Healthcare Worker Focus; (4) Experimental and Psychometric Intervention; (5) Mixed Methods. We identified group and individual level determinants for attitudes, operating directly and indirectly, that influence vaccine uptake. We found that access issues, often ignored within the public “anti-vax” debate, remain highly pertinent. Finally, a consistent theme was the effect of misinformation and lack of knowledge or trust in healthcare, often stemming from the Wakefield controversy. Future COVID-19 immunisation campaigns for children should consider both access and attitudinal aspects of vaccination, and incorporate a range of methodologies to assess progress, taking into account socio-economic variables and the needs of disadvantaged groups.

From single-cell organisms to complex neural networks, all evolved to provide control solutions to generate context and goal-specific actions. Neural circuits performing sensorimotor computation to drive navigation employ inhibitory control as a gating mechanism, as they hierarchically transform (multi)sensory information into motor actions. Here, we focus on this literature to critically discuss the proposition that prominent inhibitory projections form sensorimotor circuits. After reviewing the neural circuits of navigation across various invertebrate species, we argue that with increased neural circuit complexity and the emergence of parallel computations inhibitory circuits acquire new functions. The contribution of inhibitory neurotransmission for navigation goes beyond shaping the communication that drives motor neurons, instead, include encoding of emergent sensorimotor representations. A mechanistic understanding of the neural circuits performing sensorimotor computations in invertebrates will unravel the minimum circuit requirements driving adaptive navigation.

The study aimed to investigate the effect of climate change exposure on affect and pro-environmental behavioural intentions in a randomised controlled trial. An online survey was completed by 100 adult participants and included measures of affect and pro-environmental behavioural intentions pre- and post-exposure. Participants were randomly allocated to a group that saw a climate change video (n=55) or a group that saw a non-climate change video (n=45). The findings showed were that participants in the climate change group showed a significant increase in negative affect and pro-environmental behavioural intention scores post-video exposure compared to the non-climate change video group. This suggests that climate change video exposure negatively influences affect but also potentially increases the intention to act pro-environmentally. These findings have the potential to support policies and societal change, however further investigation into the type of contents, actual behaviour change, and impacts on diverse populations (e.g., minority groups) is needed that influences pro-environmental behaviours is required. Furthermore, to achieve a greater impact, future research should be conducted measuring actual pro-environmental behaviour change, including with those from diverse populations.

Abstract In order to solve the problem that it is difficult to obtain the accurate trigger signal moment when using the time difference of UAV flight acoustic signals collected by acoustic sensors arranged in advance to locate the position of UAVs when they cannot be tracked by radar and are difficult to be observed by the human eye, an acoustic source localisation method with improved empirical modal decomposition (REMD) under an adaptive frequency window is proposed. Firstly, the collected UAV flight signals are smoothed and filtered, then the robust empirical modal decomposition (REMD) is used for IMF modal decomposition and spectral analysis of the collected signals, and a panning frequency window with variable bandwidth is introduced for corresponding frequency locking and extracting the IMFs; the GWO optimisation is used and the sliding metrics are set to determine the position of the panning frequency window automatically; finally, the extracted Finally, the extracted IMF components are reconstructed according to the criterion, and the trigger signal moments in the reconstructed IMF components are resolved and recorded, and the algorithm is used to calculate the difference between the reception moments of different sensors; for the traditional sound source localisation algorithms with a small detection range, which are prone to fall into the no-solution or false-solution, i.e., unable to achieve the localisation, a weighted least-squares-based Chan-Taylor algorithm is proposed for the localisation computation, and a weighted least-squares algorithm is proposed for the localisation computation, through the Inputting the sensor delay parameter and solving the linear equation system to get the target position information; finally, this paper verifies the robustness and performance of the design method with simulated and actual signals. The results show that the maximum positioning error is no more than 5% in an area with a side length of 15m in the measurement area. With the improved accuracy of time delay estimation, the positioning simulation results meet the positioning requirements even though the positioning error is further expanded when the measurement area is further expanded.

Indoor comfort is a critical determinant of the holistic educational experience, significantly influencing the well-being, concentration, and performance of students within the confines of school environments. Despite the widespread implementation of heating, ventilation, and air conditioning (HVAC) systems in educational institutions, achieving satisfactory thermal conditions, acceptable acoustics, and optimal daylight levels for occupants continues to pose a considerable challenge. In this review, we specifically delves into the parameters characterizing Italian school environments, recognizing their direct impact on students’learning and concentration. The primary objectives of this review are conducting a thorough examination of the current acustic conditions in Italian schools. The initial phase of our search strategy involved retrieving data from key databases, namely, Scopus, Web of Science, ScienceDirect, PubMed, and Google Scholar. Following the elimination of duplicate articles (n = 289), a total of 135 distinct papers remained for analysis. A critical review of the existing literature is presented based on these criteria, offering guidelines and recommendations for forthcoming studies. The critical review underscores various shortcomings in the current design, deployment, and documentation of multi-domain studies, signaling the need for enhanced quality in future research efforts.

Extensive use of petrochemical plastic packaging leads to the greenhouse gas emission and con-tamination to soil and oceans, posing major threats to the ecosystem. The packaging needs, hence, are shifting to bioplastics with natural biodegradability. Lignocellulose, the biomass from forest and agriculture, can produce cellulose nanofibrils (CNF), a biodegradable material with ac-ceptable functional properties, that can make packaging among other products. CNF extracted from lignocellulosic wastes can lower the packaging carbon footprint and the production cost. Most of these low value feedstocks go to alternative applications, that make their use in CNF packaging competitive. To transfer the waste materials from current practices to the packaging production, it is imperative to assess their sustainability, encompassing environmental and eco-nomic impacts along with the feedstock physical and chemical properties. A consolidated over-view of these criteria is absent in the literature. This study performs an iterative literature review and presents thirteen attributes, delineating sustainability of lignocellulosic wastes for commer-cial CNF packaging production. These criteria data are gathered for the UK waste streams, and transformed into a quantitative matrix, evaluating the waste feedstock sustainability for CNF packaging production. The presented approach can be adopted to decision scenarios in bioplas-tics packaging conversion and waste management.

The study addresses the urgent environmental issue of climate change, focusing specifically on the role of local food, which is produced and consumed locally, helps reduce carbon emissions by eliminating the need for long-distance transportation. Through quantitative analysis, this study elucidates the potential benefits in environmental impact achieved through the consumption of local food: the significant reduction in carbon emissions. Specifically, the consumption of local food is found to yield an annual decrease of 2,421,296 tCO2 emissions, representing 2.5% of South Korea’s total greenhouse gas emissions from the transportation sector. This reduction further translates into an estimated economic value of USD 54.23 million (KRW 70.5 billion). This study underscores the potential of local food consumption as a tangible strategy to overcome environmental problems. Moreover, its academic contribution lies in its comprehensive analysis of the economic and empirical impacts of local food consumption on environment. Moving forward, we propose policies such as supporting local food distribution networks, providing public education on local food, fostering the local food industry, and providing incentives to revitalize local food consumption.

A PLS-based quality prediction method is proposed for batch processes using two-dimensional extended windows. To realize the adoption of information in the direction of sampling time and batch, a new definition region of support (ROS), k-i-back-extended region of support (KIBROS), is proposed to establish the extended window, which including the data of the previous sampling times in the same batch, the data of the same sampling time in the historical batches, the data of the previous sampling times in the historical batches and the data of the later sampling times in the historical batches. According to these regions of support, extended windows are established, and different models are proposed based on the extended windows for batch processes quality prediction. Further, using a typical batch process as an example, the injection molding process, the proposed quality prediction method is experimentally verified, proving that the proposed methods have higher prediction accuracy than the traditional method and the prediction stability is also improved.

Interstitial lung disease (ILD) is one of the most serious extra-articular complications of rheu-matoid arthritis (RA), which increases the mortality of RA. Because the pathogenesis of RA-ILD remains poorly understood, appropriate therapeutic strategies and biomarkers have not yet been identified. Thus, the goal of this review was to summarize and analyze the reported data on the etiology and pathogenesis of RA-ILD. The incidence of RA-ILD increases with age, and is also generally higher in men than in women and in patients with specific genetic variations and eth-nicity. Lifestyle factors associated with an increased risk of RA-ILD include smoking and exposure to pollutants. The presence of an anti-cyclic citrullinated peptide antibody, high RA disease activity, and rheumatoid factor positivity also increase the risk of RA-ILD. We also explored the roles of biological processes (e.g., fibroblast–myofibroblast transition, epithelial–mesenchymal transition, and immunological processes), signaling pathways (e.g., JAK/STAT and PI3K/Akt), and the his-topathology of RA involved in RA-ILD pathogenesis based on published preclinical and clinical models of RA-ILD in animal and human studies.

Recent studies have demonstrated silk fibroin’s ability to extend the shelf life of foods by mitigating the hallmarks of spoilage, namely oxidation and dehydration. Due to the potential for this protein to become more widespread, its safety was evaluated comprehensively. First, a bacterial reverse mutation test (Ames test) was conducted in five bacterial strains. Second, an in vivo erythrocyte test was conducted with Sprague Dawley rats at doses up to 1,000mg/kg-bw/day. Third, a range-finder study was conducted with Sprague Dawley rats at the highest consumption amount given solubility and oral gavage volume constrains (500mg/kg-bw/day). Fourth, a 28-day study in Sprague Dawley rats was conducted at the 500mg/kg-bw/day amount. Fifth, an in vitro pepsin digestion assay was performed to assess the potential for protein allergenicity. Sixth, allergenic potential was further assessed using liquid chromatography-mass spectroscopy for detection of allergenic insect proteins. Seventh, the protein sequences were subjected to bioinformatic analyses. Together, these studies raise no mutagenic, carcinogenic, toxicological, or allergenic concerns with the oral consumption of silk fibroin.

Background: This study aims to investigate the patient safety culture at a sports medicine hospital and explore quality of healthcare and associated factors. Methods: In a cross-sectional study design, the tool Hospital Survey on Patient Safety Culture (HSOPC) was administered online among staff at a sports medicine hospital in Doha, Qatar. About 319 staff participated from 898 staff who received emails (35.5%). Results: The results showed that 49.2% of the staff rated the patient safety grade as excellent and 36.1% as very good, which sums up to 85.3%. Factors associated with better patient safety grade were work climate (OR 10.3 95% CI (3.2 to 33.6); teamwork OR 7.6 95% CI (2.8 to 20.9) and team communication (OR 2.9 95% CI (1.1 to 7.6). Conclusions: Addressing the work climate, enhancing communication, and cohesive work within teams facilitates a culture of trust that improves patient safety grade. Ensuring quick return to play is a team effort involving multiple disciplines, hence a high performance and safety culture can enhance teamwork. Reducing punitive response to error and encouraging staff and supervisors are key areas that can improve safety culture in sports medicine organizations, and efforts should be placed in this area.

The goal of the current study is to analyse several nonlinear two-dimensional time-fractional Rosenau Hymanequations. The two-dimensional fractional Rosenau-Hyman equation has extensive use in engineering and applied sciences. The fractional view analysis of two-dimensional time-fractional Rosenau-Hyman equations is discussed using the homotopy perturbation approach, adomian decomposition method, and Yang transformation. Some examples involving two-dimensional time-fractional Rosenau-Hyman equations are provided in order to better understand the suggested approaches. The solutions appear as infinite series. We offer a comparison between the accurate solutions and those that are generated employing the proposed approaches in order to demonstrate the effectiveness and applicability of the proposed techniques. The results are graphically illustrated using 2D and 3D graphs. It has been noted that the obtained results and the targeted problems real solutions are quite similar. Calculated solutions at various fractional levels describe some of the problems useful dynamics. Other fractional problems that arise in other fields of science and engineering can be solved using a modified version of the current techniques.

In forensic acoustics, a possible area of analysis is represented by unwanted sound that 1 is perceived as a source of intrusion or disturbance within a certain auditory context. This context 2 is defined as the "auditory scene" and refers to the set of sounds present in a specific environment. 3 The presence of unwanted sounds in the auditory scene can cause a wide range of negative effects, 4 including disturbance, discomfort, moral or immoral harm, and other types of negative impact on the 5 health and well-being of individuals exposed to noise. In 2022, the technical specification UNI/TS 6 11844:2022 dedicated to the measurement and analysis of intrusive noise was published. The standard 7 introduces the concept of intrusive noise and defines its calculation methods based on environmental 8 measurements. The purposes of this technical specification is to provide an objective support to 9 methods already in used in acoustic disputes, where the assessment of the annoyance of a noise is 10 often a subjective evaluation of the technician. This work delves into the application to some real 11 cases, identifying the potentiality and the limits of the standardized method.

Since December 2019, the coronavirus disease (COVID-19) has rapidly spread worldwide. The Mexican government has implemented public safety measures to minimize the spread of the virus. In this paper, the authors use statistical models in two stages to estimate the total number of coronavirus (COVID-19) cases per day at the state and national level in Mexico. Two types of models are proposed: first, a polynomial model of the growth for the first part of the outbreak until the inflection point of the pandemic curve and then a second nonlinear growth model is used to estimate the middle and the end of the outbreak. Model selection will be performed using Vuong’s test. The proposed models show overall fit similar to predictive models (e.g. time series, and machine learning); however, the interpretation of parameters is less complex for decision-makers and the residuals follow the expected distribution when fitting the models without autocorrelation being an issue.

Amid escalating urbanization, devising rational commercial space layouts is a critical challenge. Leveraging machine learning, this study uses a Back-propagation (BP) neural network to optimize commercial spaces in Weinan City's central urban area. The results indicate an increased number of commercial facilities with a trend of multi-centered agglomeration and outward expansion. Based on these findings, we propose a strategic framework for rational commercial space development emphasizing aggregation centers, development axes, and spatial guidelines. This strategy provides valuable insights for urban planners in small and medium-sized cities in the Yellow River Basin and metropolitan areas, ultimately showcasing the power of machine learning in enhancing urban planning.

The uncertainty in the secondary path of an Active Noise Control (ANC) headphone affects the waterbed effect and stability of the feedback system. This study focuses on the uncertainty of the secondary path when real users wear headphones, and proposes a new uncertainty constraint based on the measured results of the secondary path transfer function under different wearing conditions of dummy head and limited subjects. This constraint and a cascaded second-order infinite impulse response filter with fixed coefficients are used to formulate a control strategic function, which is optimized by the Improved Grey Wolf Optimizer (IGWO) algorithm to obtain the optimal controller with better noise reduction performance. The proposed method and simulation model are validated based on the experimental test results. The results demonstrate that the safety factor and waterbed suppressing factor contained in the proposed uncertainty constraint ensures more stable noise reduction and effective suppression of the waterbed effect for new subjects without a priori data.

The purpose of this study was to identify potential causes of violence and crime in informal settlements and residents’ strategies for response and prevention to these issues, as perceived by women living in Mathare informal settlement in Nairobi, Kenya. A total of 55 in-depth interviews were conducted with women living in the informal settlement in 2015-2016. A modified grounded theory approach was used to guide data collection and analysis. The most common contributor to violence and crime identified by women in Mathare informal settlement was idle youth, but leadership and government challenges, corruption and/or inadequacy of police, community barriers, tribalism, and lack of protective infrastructure also emerged as contributing factors. Despite facing many economic, environmental, and day-to-day challenges, women in Mathare identified violence and crime as predominant issues; thus, developing effective response and prevention strategies to these issues in informal settlements is paramount. Women suggest there are many strategies and initiatives to reduce and prevent violence and crime in informal settlements, but also identified barriers to implementing them. Findings suggest there is a need for trust-building between formal and informal organizations and institutions, systems of accountability, and long-term investment to foster sustainable and effective violence and crime response and interventions in these settlements.

Quantitative determination of the critical size of inclined coal pillar in old goaf water affected area is of great significance for water damage prevention and safe mining. The critical size of inclined waterproof coal pillar is derived by using theoretical analysis, numerical calculation and field engineering practice for the stability of the waterproof coal pillar in old goaf water affected area of 1303 working face of Dananhu I mine in Xinjiang region. Firstly, a force model of inclined waterproof coal pillar was established to reveal the law that the critical size of the coal pillar increases with the increase of coal seam inclination under the action of asymmetric load. Then, numerical simulation was applied to reveal the dynamic evolution process of plastic deformation-destabilization-destruction of section coal pillar under the influence of mining and single-side water pressure, and the critical size of waterproof coal pillar in study area was determined to be 19.09m. Finally, measures such as pumping and pressure relief and slurry reinforcement were adopted to reduce the deformation rate of the roadway on side of waterproof coal pillar, which ensured the stability of the coal pillar and roadway and the safe recovery of the working face.

The key links of face recognition are digital image preprocessing, facial feature extraction and pattern recognition, this article aimed at the current problem of slow speed and low recognition accuracy of face recognition , from the above three key links, on the basic of analyzing the therories of Fractional Differential Masks Operator (FDMO), Principal Component Analysis (PCA) and Support Vector Machine (SVM), design a kind of FDMO+PVA+SVM coupling algorithm that applies to face recognition to improve the speed and accuracy of it. To realize FDMO+PCA+SVM coupling algorithm, first, we should apply FDMO to face image processing binary marginalization, the purpose is getting face contour; Then, we apply PCA to get the feature of face image which is disposed by binary marainalization. At last, we can apply One-Against All of the SVM classifier and LibSVM software package to realize face recognition. Beside, the article with nine different coupling algorithm design four groups of experimental reaults on the ORL face database verified by comparative analysic FDMO+PCA+SVM coupling algorithm in the superiority of face recognition accuracy and speed.

Acute pancreatitis (AP) is an inflammatory condition of the pancreas and is one of the most common ailments of the gastrointestinal system that results in significant morbidity and mortality. The main etiologic causes of AP are alcohol consumption, gallstones, hypertriglyceridemia, and biliary stones. The clinical signs and symptoms, and diagnostic criteria of AP are well established in the literature and multiple studies. Multiple scoring systems have been used to predict the severity, prognosis, and mortality associated with AP. The present review of the literature brings to light the significant and recent contributions in the etiology, risk factors, epidemiology, diagnosis, complications, prognosis and newest modalities in treatment that could be beneficial in the management of AP.

The article describes the rational for inhibition of the angiotensin-converting enzyme 2 (ACE2) pathways as specific targets in patients infected by SARS-CoV-2 in order to prevent the establishment of positive feedback loops triggered by COVID-19 in some predisposed subjects. Making use of a large quantity of published reports in which human/rodent ACE2 pathway inhibitors were administered in vivo, it is hypothesized a possible therapeutic pharmacological intervention through an inhibition strategy of the zinc metalloprotease ACE2 and its downstream pathway for SARS-CoV-2 patients. Of even more interest, metal (zinc) chelators and renin inhibitors (both FDA approved drugs) may also work alone or in combination in inhibiting the positive feedback loops, initially triggered by COVID-19 and subsequently sustained by hypoxia independently on viral trigger, when both arms of renin-angiotensin system (ACE2 and ACE) are upregulated, leading to critical, advanced and untreatable stages of the disease.

BackgroundThe present review summarizes the state-of-the-art of in silico methods and techniques that are the most useful in drug discovery, their relationship with data science, as well as the successful application of data science, machine learning (ML) and artificial intelligence (AI) applications. A meta-analysis of the various technologies available is furthermore proposed as a guideline for the non-expert, reader relative to the several subject areas is also discussed in this article. The scope of this meta-analysis is to rank the enlisted technologies by their field of applications and to depict the latter according to knowledge accessibility, from students to experts.Method The search strategy utilized for this review first produced a general collection of 900 papers without duplications, which were subsequently streamlined and divided into two independent collections: the top 300 most-cited papers of all time (since 2000) and the papers with the highest interest for a systematic review analysis (high-impact exciting papers). Results In Part 1, we discuss the most cited and quality 97 articles in these top 300 papers most relevant to the field of in silico drug discovery. The different disciplines are listed according to their industrial and economic incurred to society, independently from the “metric” results of how many new drug approvals (NDAs) each discipline has generated to date.ConclusionBig data, the ensemble of known items stored in publicly available databases, has improved our understanding of the many fates of a potential drug candidate during its development and even after its commercialization. Moreover, the combination of new screening techniques and “omics” with old drugs has led to a new paradigm in which the unknown knowledge of any biological molecule and its cellular structure, now plays an important role as a target for a series of yet-to-be-developed drugs: the chemical space. Furthermore, leveraging big data, data science, ML, and AI can revolutionize drug discovery by swiftly analyzing massive datasets, predicting efficacy and safety profiles, streamlining development, cutting costs, and boosting success rates for new drugs. AI also speeds up the search for promising drug candidates, advancing innovative therapies.

This paper mainly explores the feasibility of using desert sand (DS) and recycled aggregate in cement stabilized base. Recycled coarse aggregate (RCA) and DS serve as the substitutes of natural coarse and fine aggregates, respectively, in cement stabilized base. A four-factor and four-level orthogonal test is designed to analyze the unconfined compressive strength, splitting tensile strength, and compressive resilient modulus. Furthermore, this paper investigates the effects of cement content, fly ash (FA) replacement rate, RCA replacement rate, and DS replacement rate on the road performance of cement stabilized base composing of RCA and DS. The test results reveal that the performance of cement stabilized base with partial RCA instead of natural coarse aggregate (NCA) and partial DS instead of natural fine aggregate satisfy the road use. Meanwhile, DS is beneficial to improve the strength of cement stabilized base. The correlation and microscopic analyses of the test results imply the feasibility of applying DS and recycled aggregate to cement stabilized base. It is hoped that this paper can offer a solid theoretical foundation for promoting the application of DS and recycled aggregate in road engineering.

In this research, catalytic steam reforming acetic acid derived from the aqueous portion of bio-oil for hydrogen production was investigated by using different Ni/ATC (Attapulgite Clay) catalysts prepared by precipitation, impregnation and mechanical blending methods. The fresh and reduced catalysts were characterized by XRD, N₂ adsorption-desorption, TEM and H₂-TPR. The comprehensive results demonstrated that the interaction between active metallic Ni and ATC carrier was significantly improved in Ni/ATC catalyst prepared by precipitation method, and in which the mean Ni particle size was the smallest (~13 nm) resulted in the highest metal dispersion (7.5%). The catalytic performance of the three catalysts was evaluated through the process of steam reforming of acetic acid in a fixed-bed reactor under atmospheric pressure at two different temperatures, such as 550 ℃ and 650 ℃. Results showed that the Ni/ATC (PM-N/ATC) prepared by precipitation method, achieved the highest H₂ yield of ~82% and little lower acetic acid conversion efficiency of ~85% than that (~95%) of Ni/ATC (IM-NATC) prepared by impregnation method. In addition, the deactivation catalysts after reaction for 4 h were analyzed by XRD, TGA-DTG and TEM, which demonstrated that the catalyst deactivation was not caused by the amount of carbon deposition, but owed to the significant agglomeration and sintering of Ni particles in the carrier.

In recent years, the need to make the built environment more resilient and adaptable to climate change has become increasingly evident. In Europe, this aspect concerns the vast majority of existing buildings, which present several deficiencies from the energy-efficiency point of view, considering they were designed before the introduction of modern energy codes. Nowadays, it is possible to retrofit existing buildings using advanced and high-efficient technologies such as Double Skin Façades (DSFs). The research aims to evaluate the use of properly designed DSFs for the energy restoration of existing buildings. In detail, various DSF configurations are applied to a residential building located in central Italy and investigated under present and future climate conditions, estimated through regional climate models. The results underline that all the analysed Double Skin Façades confirm to be a useful option, and, in particular, the Multi-Storey typology allows drastic energy needs decrement. Moreover, the general increase in temperatures and solar radiations could affect the building energy performance, and the insertion of DSF can mitigate the climate change effects, reducing the predicted energy consumption and ensuring better behaviours than the building in its original state.

Water pollution, intensified by the release of hard-to-degrade pollutants, poses severe threats to ecosystems, human health, and economic development. The existing advanced oxidation processes often involve high operational costs and may result in secondary pollution, highlighting the necessity for innovative and more sustainable solutions. To address these challenges, our study introduces a cost-effective and eco-friendly corona discharge barrier plasma discharger for wastewater treatment. Through the central composite design/response surface methodology, a high decolorization rate of 98% of methylene blue (MB) within 10 minutes was achieved by optimizing parameters such as pH and voltage. Furthermore, the mechanisms of the generation of reactive oxygen species via this device was discussed in detail and the degradation pathways of MB were described. Moreover, this device is also very energy-efficient, with a low energy density and electrical energy per order of 0.15 watt/mL and 5.79 kWh/m³/order, respectively. In conclusion, the plasma discharger developed in this study provides a cost-effective and environmentally sustainable solution for dye wastewater treatment. This research contributes significantly to the advancement of sustainable dye wastewater management practices, offering an innovative method that meets both environmental and economic objectives.

JC polyomavirus (JCPyV) is a human-specific polyomavirus that establishes a silent lifelong infection in multiple peripheral organs, predominantly those of the urinary tract, of immunocompetent individuals. In immunocompromised settings, however, JCPyV can infiltrate the central nervous system (CNS), where it causes several encephalopathies of high morbidity and mortality. JCPyV-induced progressive multifocal leukoencephalopathy (PML), a devastating demyelinating brain disease, was an AIDS-defining disease pre-antiretroviral therapy that has “reemerged” as a complication of immunomodulating and chemotherapeutic agents. No effective anti-polyomavirus therapeutics are currently available. How depressed immune status sets the stage for JCPyV resurgence in the urinary tract, how the virus evades pre-existing antiviral antibodies to become viremic, and where/how it enters the CNS are incompletely understood. Addressing these questions requires a tractable animal model of JCPyV CNS infection. Although no animal model can replicate all aspects of any human disease, mouse polyomavirus (MuPyV) in mice and JCPyV in humans share key features of peripheral and CNS infection and antiviral immunity. In this review, we will discuss evidence suggesting how JCPyV migrates from the periphery to the CNS, innate and adaptive immune responses to polyomavirus infection, and how the MuPyV-mouse model is providing insights into the pathogenesis of JCPyV CNS disease.

As air traffic demand grows, robust, data-driven anomaly detection methods are required to ensure that aviation systems become safer and more efficient. The terminal airspace is identified as the most critical airspace for both individual flight-level and system-level safety and efficiency. As such, developing data-driven anomaly detection methods to analyze terminal airspace operations is paramount. With the expansion of ADS-B technology, open-source flight tracking data has become more readily available to enable larger-scale analyses of aircraft operations. This paper makes a distinction between spatial metrics in ADS-B trajectory data and energy metrics derived from ADS-B trajectory data. Motivated by the limited number of approaches that simultaneously consider both spatial and energy metrics, this paper introduces the concepts of spatial anomalies and energy anomalies. In particular, it proposes a novel, unified framework for detection of spatial and energy anomalies in ADS-B trajectory data (and associated derived metrics). The framework consists of three main parts - a data processing procedure, a spatial anomaly detection method, and an energy anomaly detection method. The framework is demonstrated utilizing four months of ADS-B trajectory data associated with arrivals at San Francisco International Airport, and the relationship between the spatial and energy anomalies in this terminal airspace is explored. The results that stem from the implementation of this framework indicate that if an aircraft is spatially not conforming to an identified set of air traffic flows representing standard spatial operations, then this aircraft is more likely to experience non-conformance to standard operations in its energy metrics. Aviation operators, such as air traffic controllers, may benefit from this observation, as it may factor into decision-making in instances where there is the potential to instruct an aircraft to spatially deviate from standard operations. Additionally, this research revealed underlying differences between trajectories that are spatially nominal yet energy-anomalous and those trajectories that are spatially anomalous and energy-anomalous. Focusing solely on energy anomaly detection does not provide insight into potential spatial-related decisions that may have been made to result in off-nominal energy behavior.

Accurately estimating shrub biomass in arid and semi-arid regions is critical for understanding ecosystem productivity and carbon stocks at both local and global scales. However, capturing the shrub biomass accurately by satellite observations is challenging due to the short and sparse features of shrubs. In this study, we presented a framework to estimate shrub biomass at a 10m spatial resolution by integrating ground in-situ data, unmanned aerial vehicle (UAV), Sentinel-2, and Sentinel-1 observations. The pilot study was conducted in the Helan mountains of Ningxia province, China. First, the spatial distribution map of shrubland and other land cover types was generated in 2023. Then, a prediction model of shrub biomass was developed in a Random Forest Regression (RFR) approach driven by different predicted variable datasets based on in-situ measurements, UAV, and satellite images. Finally, the developed model was used to produce the biomass map of shrubland in 2023. The uncertainty was characterized by creating a standard deviation (SD) map using the Leave-One-Out Cross-Validation (LOOCV) method in the shrub biomass estimates. The resultant shrubland distribution map in 2023 has an F1 score of 0.92. The shrub biomass model driven by spectral bands and vegetation indices (R2= 0.62) demonstrated superior performance than that only driven by spectral bands (R2=0.33) or vegetation indices (R2=0.55). The uncertainty of the estimated biomass was lower than 4%, with the lowest values (<2%) happening in the high shrub coverage (>30%) and biomass production (>30kg/m2) regions. Furthermore, the findings show that the magnitude of shrub biomass was affected by the aridity and precipitation significantly in the study region. This study provides a workflow to accurately monitor the biomass of shrublands in a complicated environment based on remote sensing images from multi-platform observations.

Gaze tracking of high-speed moving targets is a novel application mode for low Earth orbit microsatellites. In this mode, small satellites are equipped with high-resolution narrow-field-of-view video cameras for stable gaze-tracking imaging of high-speed moving targets. This paper proposes a high-precision attitude adaptive integral sliding mode control method with a feedforward compensation disturbance observer to enhance the capability of a microsatellite attitude control system for gaze tracking of high-speed moving targets. Specifically, first, we present the attitude control system model for microsatellites and the calculation method for the desired attitude of target tracking based on image feedback. Then, an adaptive integral sliding mode attitude control algorithm with a feedforward compensation disturbance observer, which meets the requirements of high-precision tracking control, is designed. The developed algorithm utilizes the disturbance observer to observe the friction torque of the flywheel and compensates for it through feedforward control. It also employs the adaptive integral sliding mode control algorithm to reduce the impact of uncertain disturbances, decrease the steady-state error of the system, and enhance the attitude control precision. Simulation experiments demonstrated that the designed disturbance observer can successfully observe the frictional disturbance torque of the flywheel. The attitude Euler angle control precision for high-speed moving target tracking reached 0.009°, and the angular velocity control precision reached 0.005°/s, validating the effectiveness of the proposed approach.

Nymphaea lotus L. is the medicinal plant that has long been used as food, cosmetic and traditional medicines in Africa and Asia since the ancient time. Its flavonoids and other interesting phytochemical compounds from rhizome, leaf, and the whole flowers have been reported in the previous published researches. However, stamens, which are essential for reproductive functions, may also represent new alternative sources of potential antioxidant flavonoids as investigated in this study. The innovative green chemistry method i.e. ultrasound-assisted extraction (USAE) as well as macroporous resin (MPR) purification procedure were employed in this current research. The optimal ultrasound-assisted extraction condition is 90 % (v/v) aqEtOH with 34.65 khz ultrasonic frequency and 46 minutes of extraction time. Comparing with heat reflux extraction (HRE) conventional method, the significant gain of 1.35 total flavonoids content was obtained using optimized USAE conditions, jumping to 2.80 when this USAE associated with MPR purification. Not only in vitro cell free antioxidant activity of N. lotus stamen extracts, but also in cellulo antioxidant investigation using yeast model showed the same trend to indicate that the best antioxidant flavonoid can be found in USAE coupled with MPR purification. Moreover, the key antioxidant genes expression in yeast model such as SIR2 and SOD2 were also expressed at the highest level in yeast cell treated with the extract from USAE together with MPR purification. Consequently, it can be seen that the USAE combined with MPR purification can help to enhance the flavonoids antioxidant potential of the stamens extract from this medicinal species.

This study aimed to investigate the relationship between sleep duration, dementia severity, age, and ANS regulation. This cross-sectional pilot study included 27 older patients with probable Alzheimer’s disease, hospitalized at a psychiatric center. We measured heart rate variability to assess ANS regulation at night, evaluated dementia severity using the Clinical Dementia Rating scale, and obtained sleep duration data from sleep diaries maintained by psychiatric nurses. The data were analyzed using repeated-measures generalized linear models with age, sex, dementia severity, and medication (antipsychotics) as covariates. A sleep duration of 7–8 h per night was associated with better ANS regulation than other sleep durations, as indicated by sympathovagal balance (p = 0.005). ANS dysregulation was characterized by a 20.7% increase in sympathetic nervous system activity and a 14.8% decrease in parasympathetic nervous system (PSNS) activity. We found a significant correlation between dementia severity and PSNS activity (p = 0.04) and observed an inverted U-shaped association between sleep duration and ANS regulation. This pilot study demonstrated that a sleep duration of 7–8 h per night may be critical in maintaining optimal ANS regulation. Bidirectional associations between sleep duration, inadequate sleep duration, aging, and ANS regulation warrant further investigation.

Around one billion people live in informal settlements, globally, including over half of Nairobi, Kenya’s three million residents. The purpose of this study was to explore women’s fear of victimization within Mathare, an informal settlement in Nairobi, Kenya and how fear of victimization influences behavior. Fifty-five in-depth interviews were conducted with women in 2016. A modified grounded theory approach guided data collection and analysis. Findings suggest fear of victimization is a serious concern in informal settlements. Women have found ways to adopt their behaviors that allow them to continue to function and protect their children despite fearing victimization, but at a potential cost to their health and well-being. Thus, there is a critical need for more research focused on social, economic, structural, community, infrastructure, technological, and individual strategies to prevent violence, enhance residents’ sense of safety, and, subsequently, minimize women’s fear of victimization in informal settlements.

Over the past couple of decades, Global positioning system (GPS) technology has been utilized to collect large-scale data from travel surveys. As the precise spatiotemporal characteristics of travel could be provided by GPS devices, the issues of traditional travel survey, such as misreporting and non-response, could be addressed. Considering the defects of dedicated GPS devices (e.g., need much money to buy devices, forget to take devices to collect data, limit the simple size because of the number of devices, etc.), and the phenomenon that the smartphone is becoming one of necessities of life, there is a great chance for the smartphone to replace dedicated GPS devices. Although, several general reviews have been done about smartphone-based GPS travel survey in the literature review section in some articles, a systematic review from smartphone-based GPS data collection to travel mode detection has none. The included studies were searched from six databases. The purpose of this review is to critically assess the current literature on the existing methodologies of travel mode detection based on GPS raw data collected by smartphones. Meanwhile, according to the systematic comparison among different methods from data-preprocessing to travel mode detection, this paper could carefully provide the Strengths and Weaknesses of existing methods. Furthermore, it is the crucial step to develop the methodologies and applications of GPS raw data collected by smartphones.

Open-vocabulary learning has recently gained prominence as a means to enable image segmentation for arbitrary categories based on textual descriptions. This advancement has extended the applicability of segmentation systems to a broader range of generally purpose scenarios. However, current methods often revolve around specialized architectures and parameters tailored to specific segmentation tasks, resulting in a fragmented landscape of segmentation models. In response to these challenges, we introduce OVAMTSeg, a versatile framework designed for Open-Vocabulary and Multitask Image Segmentation. OVAMTSeg harnesses adaptive prompt learning to empower the model to capture category-sensitive concepts, enhancing its robustness across diverse multi-task and scenario contexts. Text prompts are employed to effectively capture semantic and contextual features of the text, while cross-attention and cross-modal interactions enable the fusion of image and text features. Furthermore, a transformer-based decoder is incorporated for dense prediction. Extensive experimental results underscore the effectiveness of OVAMTSeg, showcasing its state-of-the-art performance and superior generalization capabilities across three segmentation tasks. Notable achievements include a 47.5 mIoU in referring expression segmentation, 51.6 mIoU on Pascal-VOC with four unseen classes, 46.6 mIoU on Pascal-Context in zero-shot segmentation, 65.9 mIoU on Pascal-5i, and 35.7 mIoU on COCO-20i datasets for one-shot segmentation.

Periodontitis is a disease that originates from gingival tissue, and if left untreated, can cause inflammation to spread to deeper tissues, altering bone homeostasis, and even leading to tooth loss. When the bacteria in plaque reach sufficient numbers, the immune system responds by activating immune cells that will produce cytokines, including interleukin-1 (IL-1), interleukin-6 (IL-6), and tumor necrosis factor-alpha (TNF-α). These immune signaling molecules will coordinate the inflammatory responses. IL-1 binds to the IL-1 receptor (IL-1R) on the surface of target cells, initiating an inflammatory response by activating intracellular signalling pathways. Inhibition of IL-1R can prevent the interaction of IL-1 with this receptor, thereby halting the activation of the inflammatory pathway. By substituting this connection with active anti-inflammatory substances, it is possible to prevent the contact between IL-1 and IL-1R. The licorice plant, Glycyrrhiza glabra, includes eight types of flavonoids with significant anti-inflammatory potential, namely isoliquiritigenin, glyzaglabrin, prunetin, shinpterocarpin, licochalcone A, glabridin, glisoflavone, and isoangustone A. This study aims to assess the potential of such flavonoids as candidates for periodontitis treatment through molecular docking, using AutoDock Tools v.1.5.6. All tested compounds showed highly stable bonds to IL-1R, with a binding affinity values below -7 kcal/mol. Van der Waals forces, hydrogen bonds, and hydrophobic bonds all contribute to the stability of these interactions. Among the eight tested compounds, glisoflavone, which has a Ki value of 90.89 nM and a ΔG value of -9.61 kcal/mol, has the highest binding stability to IL-1R.

A case-crossover study examined how PM_2.5 from Asian Dust Storms (ADS) affects the number of emergency room (ER) admissions for cardiovascular diseases (CVDs) and respiratory diseases (RDs). Our data indicated that PM_2.5 concentration from ADS was highly correlated with ER visits for CVDs and RDs. The odds ratios (OR) increased by 2.92 (95% CI: 1.22-5.08) and 1.86 (95% CI: 1.30-2.91) per increase 10 µg/m³ in PM_2.5 levels, for CVDs and RDs, respectively. A 10 µg/m³ increase in PM_2.5 from ADSs was significantly associated with increase in ER visits for CVDs among those 65 years of age and older (an increase of 2.77 in OR) and for females (an increase of 3.09 in OR). In contrast, PM_2.5 levels had a significant impact on RD ER visits among those under 65 years of age (OR=1.77). The risk of ER visits for CVDs increased on the day when the ADS occurred in Taiwan and the day after (lag 0 and lag 1); the corresponding risk increase for RDs only increased on the fifth day after the ADS (lag 5). In Taiwan’s late winter and spring, the severity of ER visits for CVDs and RDs increases. Environmental protection agencies should employ an early warning system for ADS to reduce high-risk groups’ exposure to PM_2.5.

The rock joint fissure slope in cold regions is prone to deformation and failure problems such as relaxation, tension and collapse under freeze-thaw (F-T) cycles. Based on the ideology of clean production and promoting the structural integrity of geotechnical projects in cold areas, this study designed and prepared aeolian-sand (AS) to replace part of river sand as a filling mortar material by taking advantage of the low cost and easy availability of AS. Investigations were carried out to determine the impact of varying proportions of AS in mortar on the microstructure and shear properties of the mortar-rock interface under F-T cycles. Therefore, F-T cycle testing, nuclear magnetic resonance (NMR) testing and shear testing were carried out on grout with different proportions of AS. The results show that the right proportion of AS replacement could enhance the shear deformation resistance and F-T resistance of the mortar-rock interface, and 30% proportion is the optimal proportion. By increasing of F-T cycles, the three types of specimens showed different degrees of particle spalling, shedding and cracking. The slurry-rock interface layer in the A (0%) group exhibited the most severe F-T deterioration, while the B (15%) group showed a lesser degree, and the C (30%) group performed the best. T2 spectrum curve and total spectrum area change law from the microscopic point of view to verify the 30% AS proportion mortar-rock interface F-T resistance is the strongest, followed by 15% AS proportion mortar, the weakest is ordinary mortar. The degradation of the mortar-rock bond is primarily due to the conversion of solid to liquid phases and the movement of internal water caused by fluctuating temperatures. The extent of F-T deterioration in the slurry-rock interface layer is greatly affected by the varying proportions of AS. The shear strength and shear stiffness of specific proportion of AS decreased with the increase of F-T cycles. For same F-T cycles, the shear strength and shear stiffness of group C (30%) were the highest, followed by group B (15%) and group A (0%). The grout material not only reinforces the F-T joint fissure slope, but also reduces the cost of grout reinforcement and promotes the clean production of geotechnical structures.

Recently, research on ultra-high-performance concrete (UHPC) with the characteristics of ultra-high strength, high toughness, and high durability has been actively conducted from materials to actual structural applications. However, research on experimental methods that reflect the unique characteristics of UHPC, which are different from those of normal concrete, is insufficient. To solve the difficulties in applying the compressive creep test method for normal concrete to UHPC and to verify the validity of the recently proposed ASTM C 1856 standard test method, this study performed compressive creep tests on UHPC with variables of specimen size, sustained load intensity, fiber length, and strain measuring method. Two types of cylindrical specimens of ϕ100 × 200 mm and ϕ75 × 150 mm were used for a specimen size variable. The sustained load intensities of 10% to 40% based on the specified compressive strength of 150 MPa were applied. Two types of steel fiber lengths of 13 mm and 19.5 mm in the UHPC mix were used as a variable, and three strain measuring methods of the embedded strain gauge method, the attached strain gauge method, and the strain meter with stud measured the change in length of the UHPC specimens. The experimental results showed that the strain meter method using the standard rod had limitations due to the error in the verification process using the standard rod and the observation error of the measurer, and the sustained load intensity is preferable to 15% to 40% of the actual compressive strength. It was found that it is possible to perform a compressive creep test for UHPC using a specimen with a size of ϕ75 mm or more, and the fiber length did not affect the creep behavior of UHPC up to 19.5 mm. As a result of comparing the UHPC creep test results with the creep prediction model, the B3 model was found to most accurately predict the UHPC creep behavior. The creep coefficient pattern of the B3 model was very similar to the measured results, and well reflected the effects of the mixing ratio and compressive strength of UHPC.

Dynamic time history analysis is a powerful and effective method to study the seismic response of tunnels, the dynamic time history to analyze the seismic response of the tunnel in the typical subway in this paper. The analysis results show that the overall levelling of the tunnel will not affect the tunnel too much, and the seismic response of the tunnel is mainly related to the relative displacement of the ground around the tunnel. The analysis results show that the internal force of the tunnel and the tunnel inclination have a good linear relationship, and the tunnel inclination can be used to measure the magnitude of the seismic response of the tunnel.

Sarcopenia is an age-related condition that involves a progressive decline in muscle mass and function, leading to increased risks of falls, frailty, and mortality. Although the exact mechanisms are not fully understood, aging-related processes like inflammation, oxidative stress, reduced mitochondrial capacity, and cell apoptosis contribute to this decline. Disruption of the circadian system with age may initiate these pathways in skeletal muscle, preceding the onset of sarcopenia. At present, there is no pharmacological treatment for sarcopenia, only resistance exercise and proper nutrition may delay its onset. Melatonin, derived from tryptophan, emerges as an exceptional candidate for treating sarcopenia due to its chronobiotic, antioxidant, and anti-inflammatory properties. Its impact on mitochondria, organelle where it is synthesized and crucial in aging skeletal muscle, further highlights its potential. In this review, we discuss the influence of clock genes in muscular aging, with special reference to peripheral clock genes in the skeletal muscle, as well as their relationship with melatonin, which is proposed as a potential therapy against sarcopenia.

As the adoption of renewable energy sources grows, ensuring a stable power balance across various time frames has become a central challenge for modern power systems. In line with the "dual carbon" objectives and the seamless integration of renewable energy sources, harnessing the advantages of various energy storage resources and coordinating the operation of long-term and short-term storage have become pivotal directions for future energy storage deployment. To address the complexities arising from the coupling of different time scales in optimizing energy storage capacity, this paper proposes a method for energy storage planning that accounts for power imbalance risks across multiple time scales. Initially, the Seasonal and Trend decomposition using the Loess (STL) decomposition method is utilized to temporally decouple actual operational data. Subsequently, power balance computations are performed based on the obtained data at various time scales to optimize the allocation of different types of energy storage capacities and assess the associated imbalance risks. Finally, the effectiveness of the proposed approach is validated through hourly applications using real-world data from a province in China over recent years.

This research focuses on the effect of trampling on vegetation in high-mountain ecosystems through the electromagnetic spectrum’s interaction with plant pigments, cell structure, water content and other substances that have a direct impact on leaf properties. The most heavily visited part of the High Tatras in Poland was divided into polygons and, after selecting the dominant species within alpine swards, a detailed analysis of trampled and reference patterns was performed. An ASD FieldSpec 3 was used to acquire high-resolution spectral properties of plants, their fluorescence and the leaf chlorophyll content with the ts-ta temperature index and fraction of accumulated radiation in the range of photosynthesis (fAPAR) used as reference data. The results show that, along tourist trails, vegetation adapts to trampling with the impact depending on the species. A lower chlorophyll value was confirmed by a decrease in fluorescence, and the state of cellular structures was degraded in trampled compared to reference species, with a lower leaf reflectance. Also, at the extreme, trampling can eliminate certain species such as Luzula alpino-pilosa.

Despite the partial disclosure of driving scenario knowledge graphs, they still fail to meet the comprehensive needs of intelligent connected vehicles for driving knowledge. Current issues include the high complexity of pattern layer construction, insufficient accuracy of information extraction and fusion, and limited performance of knowledge reasoning models. To address these challenges, a hybrid knowledge graph method was adopted in the construction of the Driving Scenario Knowledge Graph (DSKG). Firstly, core concepts in the field were systematically sorted and classified, laying the foundation for the construction of a multi-level classified knowledge graph top-level ontology. Subsequently, by deeply exploring and analyzing the Traffic Genome data, 34 entities and 51 relations were extracted and integrated with the ontology layer, achieving the expansion and updating of the knowledge graph. Then, in terms of knowledge reasoning models, an analysis of the training results of the TransE, Complex, Distmult, and Rotate models in the entity linking prediction task of DSKG revealed that the Distmult model performed the best in metrics such as hit rate, making it more suitable for inference in DSKG. Finally, a standardized and widely applicable Driving Scenario Knowledge Graph was proposed. The DSKG and related materials have been publicly released for use by industry and academia.