Pancreatic β-cell-specific clock knock-out mice develop β cell oxidative-stress and failure, as well as glucose-intolerance. How inflammatory stress affects the cellular clock is under-investigated. Real-time recording of Per2:luciferase reporter activity in murine and human pancreatic islets demonstrated that the proinflammatory cytokine Interleukin-1β (IL-1β) lengthened the circadian period. qPCR-profiling of core clock gene expression in insulin-producing cells suggested that the combination of the proinflammatory cytokines IL-1β and Interferon-γ (IFN-γ) caused pronounced but uncoordinated increases in mRNA levels of multiple core clock genes, in particular of Reverse-erythroblastosis virus α (Rev-erbα), in a dose- and time-dependent manner. The REV-ERBα/β agonist SR9009, used to mimic cytokine-mediated Rev-erbα induction, reduced constitutive and cytokine-induced Brain and muscle arnt-like 1 (Bmal1) mRNA levels in INS-1 cells as expected. SR9009 induced reactive oxygen species (ROS), reduced insulin-1/2 (Ins-1/2) mRNA and accumulated- and glucose-stimulated insulin secretion, reduced cell-viability, and increased apoptosis levels, reminiscent of cytokine toxicity. In contrast low (<5,0 μM) concentrations of SR9009 increased Ins-1 mRNA and accumulated insulin-secretion without affecting INS-1 cell viability, mirroring low-concentration IL-1β mediated β-cell stimulation. Inhibiting nitric oxide (NO) synthesis, the lysine deacetylase HDAC3 and the immunoproteasome reduced cytokine-mediated increases in clock gene expression. In conclusion, the cytokine-combination perturbed the intrinsic clocks operative in mouse and human pancreatic islets and induced uncoordinated clock gene expression in INS-1 cells, the latter effect associated with NO, HDAC3 and immunoproteasome activity.

In recent years, excessive heat in the urban texture has become the main problem in the humid and calm wind city of Babolsar with high density, especially in high-rise areas. Therefore, in order to create comfort in this region, it is necessary to establish and continue the wind circulation in space with an environmentally compatible and optimal configuration. The study applies combination of literature, field measurement, experimental validation of CFD simulation output, and comparative analysis. After field measurement and validation of FLOW-3D simulation software (V11.2.2), the relationship between these parameters (height, the width of passages, enclosure between buildings, and buildings' orientation) will be studied which affects the wind’s velocity and direction. The factors of the buildings' orientation and enclosure based on the passages' width have opposite reactions in the direction of the prevailing wind especially from perpendicular side. In this study, two effective factors are on wind velocity: 1- The orientation of the buildings towards the wind flow by creating permeability 2- Reducing the enclosure by increasing the width of the passage's perpendicular to the wind flow (w '= 3w, E' = 0.33E). According to the theoretical and practical study, first, the creation of permeability in the body of the block and the separation of buildings instead of aggregation has been studied, and then reducing the confinement of streets perpendicular to the wind flow has been discussed as effective solutions to improve the wind velocity and circulation between the urban environment.

Recently, more wind turbine systems are being installed in deep waters far from the coast. Several concepts of floating wind turbine systems (FWTSs) are developed, among which the semisubmersible platform, due to its applicability in different water depths, good hydrodynamic performance, and facility in the installation process, constitutes the most explored technology compared to the others. However, a significant obstacle to the industrialization of this technology is a design of a cost-effective FWTS, which can be achieved by optimizing the geometry, size and weight of the floating platform, along with the mooring system. This is only possible by selecting a method capable of accurately analyzing the FWTS coupled hydro-aero-structural dynamics at each design stage. Accordingly, this paper aims at providing a detailed overview of the most common coupled numerical and physical methods, including their basic assumptions, formulations, limitations, and costs, used for analyzing the dynamics of FWTSs, mainly those supported by a semisubmersible, to assist the choice of the most suitable method at each design phase of FWTSs. Finally, the article discusses possible future research to address challenges in modeling FWTSs dynamics that persist to date.

Zagros is an important region with high quality and quantity karstic water resources in the Middle East. This region provides a dominant part of potable and agricultural water needs for its inhabitants as well as agricultural water needs for nearby regions. Therefore, studying karstic water resources in Zagros by accurate methods such as stable isotopes techniques is very important. In this investigation, hydrological characteristics of groundwater resources including groundwater origin, recharge rate and recharge elevation have been studied using stable isotopes (¹⁸O and ²H). The results show that stable isotopes signatures in groundwater resources show notable variations across Zagros and groundwater resource mainly plot on south and west Zagros meteoric water lines. In addition, recharge elevation and recharge rate in groundwater resources also show significant variations in Zagros. Finally, the stable isotopes signatures in precipitation and groundwater has been used to study the role of each dominant air mass (contribution percentage of precipitation events originate from each air mass) in groundwater resources recharge using Simmr package in R language. Overall, groundwater resources in Zagros is recharged by precipitation events originate from various air masses and they have various recharge rates and recharge elevations.

This paper generalizes the actuator disc theory to the application of crosswind kite power systems. For simplicity, it is assumed that the kite sweeps an annulus in the air, perpendicular to the wind direction (i.e. straight downwind configuration with tether parallel to the wind). It is further assumed that the wind flow has a uniform distribution. Expressions for power harvested by the kite is obtained, where the effect of the kite on slowing down the wind (i.e. the induction factor) is taken into account. It is shown that although the induction factor may be small for a crosswind kite (of the order of a few percentage points), neglecting it in calculations may result in noticeable overestimation of the amount of power harvestable by a crosswind kite system.

In this article, metallic additive manufacturing (AM) processes were classified and demonstrated. AM technology can be applied to a wide range of industrial areas because of its great feasibility in the design and manufacturing of various complex parts. The main factor that distinguishes various metallic AM processes from each other is the deposition method. Deposited metal can be imported in the form of melt or semi-solid. AM technology also covers a wide range of materials like aluminum, titanium, and many other alloys. Some of the common applications of metallic AM processes are the quick manufacturing of the parts which utilized in various industries like medical, automotive, aerospace, and jewelry industries. AM can help to fabricate parts that are impossible to be manufactured by other processes.

The neural system has limited resources to interact with the environment, and this is where attention comes into play. Attention is a complex process that provides numerous benefits, but there has been a longstanding debate about the mechanisms involved in attentional orientation. Two widely proposed mechanisms are top-down and bottom-up, which relate to the organism's current behavioral goal and the salience of environmental stimuli, respectively. However, distinguishing between these mechanisms can be challenging in both behavioral and neural studies. This review introduces a new conceptualization in which both top-down and bottom-up mechanisms are viewed as aspects of the same process. This unified approach aims to prepare the organism to face stimuli and events based on its prior experiences, immediate (the current task that he/she is aware of), and innate (to be alive) demands.

Various natural disasters such as floods, fires, earthquakes, etc. have affected human life. Detection and classification of large and small earthquakes caused by natural or abnormal events have been always important to Earth scientist. One of the most important research challenges in this field is the lack of an effective method for identifying and categorizing various types of seismic events at less important and important levels. Based on latest achievements of Data Mining international institutions such as Rexer-KDnugget-Gartner and also newest authentic articles, SVM, KNN, C4.5, MLP are from most important and popular and leading classifiers in data world.Therefor in present study, a boost learning system consisting support vector machine algorithms with linear regression, MLP Neural Network ، C4.5 decision tree and KNN near neighborhood have been utilized in a combined form to detect and categorize micro seismic events. In general, the steps involved in the proposed method are: 1) performing artificial seismic tests, 2) data gathering and analysis, 3) conducting preprocessing and separating training and testing samples, 4) generating relevant models with training samples and detecting and categorizing test samples and 5) extracting a cluster with the maximum candidate using boost learning. After simulations, it was observed that the accuracy of proposed boost method to the best answer was about 6.1% higher compare to other methods and the error rate was 0.082% of recalling. Accuracy of detection and classification to the best answer were also improved compare to other methods up to 2.31% and 6.34%, respectively.

With advances in Building Information Modeling (BIM), Virtual Reality (VR) and Augmented Reality (AR) technologies have many potential applications in the Architecture, Engineering, and Construction (AEC) industry. However, the AEC industry, relative to other industries, has been slow in adopting AR/VR technologies, partly due to lack of feasibility studies examining the actual cost of implementation versus an increase in profit. The main objectives of this paper are to understand the industry trends in adopting AR/VR technologies and identifying gaps within the industry. The identified gaps can lead to opportunities for developing new tools and finding new use cases. To achieve these goals, two rounds of a survey at two different time periods (a year apart) were conducted. Responses from 158 industry experts and researchers were analyzed to assess the current state, growth, and saving opportunities for AR/VR technologies for the AEC industry. The findings demonstrate that older generations are significantly more confident about the future of AR/VR technologies and they see more benefits in AR/VR utilization. Furthermore, the research results indicate that Residential and commercial sectors have adopted these tools the most, compared to other sectors and institutional and transportation sectors had the highest growth from 2017 to 2018. Industry experts anticipated a solid growth in the use of AR/VR technologies in 5 to 10 years, with the highest expectations towards healthcare. Ultimately, the findings show a significant increase in AR/VR utilization in the AEC industry from 2017 to 2018.

Plasma-activated water (PAW) is an emerging and promising green technology in the agriculture sector during recent years. The aim of this study was to examine the influence of the spraying of PAW and amino acid fertilizer concentrations on the physiological, biochemical and phytochemical characteristics of German chamomile varieties under field conditions. Method: The experiment was performed during 2020–2021 as a factorial using a randomized complete block design with three replications, in an arid and warm region. The factors contained five fertilizer levels (0 (control), 1, 2, 3 ml·L−1 amino acid and PAW) and three German chamomile cultivars Bona, Bodegold, Lianka). Physiological, biochemical and phytochemical traits such as plant height, fresh and dried flower weight, chlorophyll a, b, carotenoids, CHN elements, C:N ratio, total protein, amino acid profile, essential oil yield, apigenin content and major secondary metabolites were examined. Results: The ANOVA indicated that the impact of the cultivar and fertilizer was significant on all physiological, biochemical and phytochemical studied parameters. The amino acid fertilizer and PAW enhanced physiological features, hydrogen, C:N ratio, essential oil yield, apigenin content and main phytochemical compositions like chamazulene and α-bisabolol, but it had no incremental effect on the carbon, nitrogen, and total protein percentage. Conclusion: Findings revealed that the application of foliar amino acid fertilizer and PAW treatments improves physiological, biochemical and phytochemical parameters in German chamomile cultivars under field conditions.

Dynamic Realistic Failure Process Analysis (DRFPA) is a numerical software based on FEM it is firstly validated by comparing with the experimental test. Such validation is carried out under two consistent concrete specimens under uniaxial compression. After validation, DRFPA is used to study the influence of two parallel pre-existing crack inclination angles on the fracture of concrete under dynamic loads. The evolution of wing cracks and secondary cracks is investigated by observing the initiation, coalescence, and propagation of them. Meanwhile, the relationship between failure mode and inclination angles is discussed via analyzing the acoustic emission events. Finally, it is concluded the relationship between inclination angles of pre-cracks and performance/stability of concrete structure.

Natural events such as floods, fires, tsunamis, earthquakes and others have nowadays caused serious damage to human beings and nature. The precise detection of these natural events and especially the earthquake has nowadays become the focus of many computer and geoscientific researchers. Computer science and machine learning algorithms have revolutionized early detection and prediction of these events. Hence, a fuzzy method has been initially used in this article to enhance the authenticity of data based on application of effective variables and then combination of neural network algorithms of the MLP perceptron and radial network of RBF in form of a collective learning system in order to more accurately identify seismic events on a small scale. It was observed after simulating the proposed method that the proposed method has significantly improved based on actual error and root-mean-square error (RMSE) criteria compared to basic methods.

In this paper a protection scheme is provided to protect microgrid by considering the problems that are generated by addition of distributed generators to distribution networks and change these networks from passive to active. At first, changes in microgrid conditions that can affect short-circuit current is explained. Then Based on these changes, an algorithm is proposed to update relays settings. The algorithm can be used for both instantaneous and inverse time relays. In this protection scheme, central unit has no place and relays are responsible for monitoring microgrid and update their settings. In other words, this protection scheme is an adaptive and decentralized microgrid protection scheme. Instantaneous overcurrent relays are used in this paper. To avoid storing large amounts of setting data in relays memory, a method for calculating pickup current of instantaneous relay is provided. Since digital relays used, a new characteristic curve for instantaneous relay for better performance in the field of backup protection is defined. This new characteristic curve has two peakup currents: one of them for main protection and the other one for backup protection. Then coordination of instantaneous relay using the new characteristic curve is explained. At the end, this protection scheme is implemented on a microgrid.

This study investigated the impact of seven-strain probiotic supplementation on the frequency of T helper 17 (Th17) cells, regulatory T (T-reg) cells, Treg/Th17 ratio, and their gene expression in individuals with severe traumatic brain injury (STBI). Probiotics can influence the gut microbiota, modulate the immune response, and prevent or alleviate certain immune diseases. However, it is necessary to clarify whether probiotics can effectively impact Th cells in STBI patient. Despite the great attention to improving the immune system in most diseases, there is currently no accurate mechanism for the use of probiotics in diseases with damage to the head injury, which can be a basis for the use of probiotics. The primary objective of this study is to address this research gap. The present study was a randomized, double-blind, placebo-controlled trial that enrolled 48 STBI patients. They were treated with probiotics or placebo: 4 capsule/day for 14 days. The pre- and post-study evaluation included examining the frequency of Treg, Th17 cells, as well as the expression of associated immunological parameters (Foxp3 and RORγt) and Treg/Th17 ratio in both groups. No significant differences were found between the two groups in terms of subject characteristics (P>0.05). GCS scores at 14 days were significantly higher in the probiotic compared to the placebo group. The probiotic group showed a significant decrease in Th17 cell and RORγt gene expression (P = 0.022 and P< 0.001, respectively), a notable increase in T-reg and FoxP3 gene expression (P= 0.025 and P< 0.001, respectively), and a higher Treg/Th17 ratio compared to the placebo group. Our study provides promising evidence of the beneficial effects of seven-strain probiotic supplementation on Th cells in individuals with STBI.

On the basis of the golden ratio and the compasseses, every angle was divided into three equal parts. In general, it has been proven that the problem of triangulation of an angle cannot be solved on the basis of the golden ratio and the expanding of the angle. The relationship of golden relativity with Pi number and Euler's number has not been investigated to solve impossible problems. According to the investigation of events in six-dimensional space-time, with the simultaneous movement of two arms of the compasses based on the golden ratio, every angle was divided into three equal parts. The growth rate based on the golden ratio is the key to solving the most intractable mathematical and physical problems.

Consciousness results from comprehending the living creature from its existence in time and space. Thought and consciousness are distinguishing factors between humans and machines having artificial intelligence. No algorithm has been offered for artificial self-awareness based on Thinking. Previous studies have not studied the relationship between consciousness, thinking and time. In this study, the relationship between consciousness, thinking, memories and speech over time has been studied. A deep logical connection exists between consciousness, thinking, and time. An algorithm can be designed for artificial consciousness based on this research findings.

This paper presents a method for producing a gravity field through an electromagnetic field. The electromagnetic field can produce a positive or negative gravity field. The relationship between gravity force and electromagnetic is unknown. Former studies by theoretical physics predict the relationship between these two forces. Based on the general balance theory in six dimensions of space and time, the electromagnetic field was studied from this viewpoint. Three-dimensional waves oscillate in the fourth dimension and electromagnetic waves distort space-time. Aggregating these distortions can behave like a positive or negative gravity field. Consequently, the production of energy is possible from gravitational fields.

A human brain can communicate with another one’s brain using quantum entanglement. Similar particles can entangle without interaction. Sensory communication between two individuals from far distances is still not known. Former studies primarily have been performed regarding brain neurons' quantum behavior. The test was performed on two individuals far from each other. These individuals were put under the same music on the basis of brain neuroplasticity property. By activating the brain reward system, aligned thinking was time scheduled in these individuals’ brains. On the basis of entanglement, compressed information was sent and received between these two individuals.

On the basis of the findings of this paper, the theories of quantum mechanics and general relativity can be expressed in a comprehensive theory. The events were surveyed length of the time, in the Euclidean six-dimensional space-time (R6=x1+x2+x3+t1+t2+t3). Previous studies have not studied the relationship between the origin of matter's inherent properties, fundamental constants, and quantum mechanics phenomenon with space-time geometry. This theory prediction the with certainty obtained probabilistic results of quantum mechanics. This prediction is on the basis of metric resulting from the Eccentricity of the Ellipse due to the object density, in the length of time. The cause and nature of dark matter and dark energy are the findings of this article.

Memory is probably one of the most complex cognitive functions of the human, and in many years, thousands of studies have helped us to better recognize this brain function. One of the reference textbooks in neuroscience, which has also elaborated on the memory function, is written by Prof. Kandel and his colleagues. In this book, I encountered a number of ambiguities when it was explaining the memory system. Here, I am sharing those points, either to find an answer for them, or to let them be a suggestion for our future works. Prof. Kandel has spent most of his meritorious lifetime on studying the memory system; however, the brain is extremely complex, and as a result, we still have many years to comprehensively understand the neural mechanisms of brain functions.

Despite the 12-lead electrocardiogram (ECG) being the gold standard in evaluating clinical presentations of arrythmias of various kinds, several notable limitations, namely in accuracy and localization, have recently garnered concern with respect to administering appropriate therapeutic measures. The following text puts these limitations under the spotlight, highlighting the difficulty and challenging nature of standard ECG analysis and therapeutic measures, while simultaneously showing a novel body surface electrocardiographic mapping system that utilizes 3D spatial imaging and pinpoint localization algorithms in order to compensate for the shortcomings of the standard ECG, thereby providing higher precision data collection. We provide a brief overview of the novel device in a selection of arrhythmic demographics, along with its validity and reliability, while illustrating the benefits and positive outcomes of its utility.

Although lithium-ion batteries have extensively been used in various applications because of their high energy capacity, fracture and failure, the by-products of large strains and stresses caused by fast charging and discharging need yet to be addressed. The size effects on the mechanical behavior of the nano-sized structures are significant; however, the classical elasticity theory may not consider such effects. On the other hand, surface stress theory, as a robust and potential theory, is suitable in considering size effects in nano-scale structures. Therefore, in this paper, in order to involve the surface stress effects on the fracture behavior of Li-ion batteries, the following steps are taken. Firstly, a phase-field model is used to determine the evolution of the concentration profile. Subsequently, the stress distribution is obtained by using the surface stress theory combined with chemical equations for a planar electrode. Afterward, by using the weight function method for an edge crack in the plate, the stress intensity factor is derived for all time steps and possible crack lengths during the process. It is found that with increasing phase boundary thickness parameter or decreasing phase-separation phenomenon, the surface mechanics parameters become more influential. Furthermore, in the presence of positive surface stress, the diffusion-induced stress distribution decreases, which in turn reduces the stress intensity factor. In addition, in this paper, the two states of surface stress are compared either for elastic or total strain. Concerning stresses and concentrations, the results indicate a big difference at the beginning of the deintercalation process showing, in particular, 2% for stresses, but the differences diminish gradually.

The fundamental challenge for the structural design of complicated shapes and lightweight structures such as Tensile Membrane Structures (TMS) is a reliable estimation of lateral loading such as wind load. Wind pressure coefficients can’t be correctly calculated by standards for a large range of intricate forms of structures. Computational Fluid Dynamics (CFD), a strong computational technique for evaluating wind pressure distribution on complicated geometry, can be used to determine wind-related parameters. The average wind related-distributions for the tensile membrane surface are validated with a few contributions from prior studies, which are important to validate with benchmarks in experimental wind tunnel experiments. For the double-curved surface, the results show good agreement between experimental tests and CFD simulations. In this study, CFD simulation was used to calculate the mean surface pressure coefficient (Cp) for generic shapes and tensile membrane forms using the steady Reynolds-Averaged Navier-Stokes (RANS) technique. Wind force coefficients and the effect of wind directions are also explored across a wide range of classical and tensile forms. The purpose of the current research is to look at the effect of wind assault angle on the Cp distribution for tensile membrane structures and general shapes.

In the previous work, the pure fatigue behavior of AM60 magnesium alloy (PF-AM60) was compared with the corrosion fatigue behavior of these specimens (CF-AM60). In this research, in continuation of the previous job, the pure fatigue behaviors of AM60 with polylactic acid (PLA) coating (PF-AM60-PLA) and also, corrosion fatigue behaviors of magnesium alloy with PLA coating (CF-AM60-PLA) were evaluated. Polymer coating was made by fused deposition modeling (FDM) with a 3D printer and attached to standard fatigue test specimens with a glue. Then, they were immersed in the simulated body fluid (SBF) for 27 days. In the end, a high-cycle bending fatigue test was performed on samples. The fracture surface of the samples was also observed using the field emission scanning electron microscopy (FESEM). Due to corrosion, the weight of the specimens redcued by an average of 35%. The corrosion rate decreased in the first 7 days and then increased. PF samples with coating had an average of 49% increase in fatigue lifetime. Regarding the CF samples, despite the use of a 10 times stronger solution, the fatigue lifetime of these samples decreased by only 35%. FESEM results also showed cleavage plates and striations. In addition, the separation of the glue from the coating and Mg was observed. Corrosion products including microcracks and holes were seen on the fracture surface of CF specimens, which caused stress concentration and crack growth. Holes caused by the release of gases were also observed in polymer coatings.

Aims: Adolescence is a critical period because the brain is involved in the process of maturation that entails cognitive functions. On the way of maturation, an individual’s inhibitory control undergoes many changes and becomes vulnerable to different thrill-seeking like smoking, drinking, and so on. Smoking is highly prevalent among teenagers that are trying to take control of their behaviors in order to join society. They experience antisocial behavior too which is a trait that can lead adolescents to addiction. This trait is an inevitable part of psychopathy. Inhibitory deficits and psychopathy have been widely reported in addiction studies. The current study tried to investigate the relationship between psychopathic traits and behavioral inhibition between male smokers and non-smoker teenage students.Materials & Methods: Statistical sample of this research is 62 teenage students aged 17 years that are divided into smoker and non-smoker groups. The participants have been chosen through random sampling from the population of 10 high schools. The data have been gathered in Kordkoy and Gorgan in Golestan province. Behavioral bias has been measured by Go/NoGo task and psychopathic traits through youth psychopathic traits inventory. Also, the short form of Wechsler Adult Intelligence Scale test has been executed and used as a control variable.Findings: A meaningful difference has been found between the performance of smoker and non-smoker groups in Go/No Go task and psychopathic traits that are smokers performed weaker in comparison with non-smokers and psychopathic traits of smokers were meaningfully higher than non-smokers. On the other hand, there was no significant difference between these two groups in their Wechsler Adult Intelligence Scale scores.Conclusion: The results have shown that smokers have higher psychopathic traits and lower behavioral inhibition when compared with their non-smoker peers. According to the results of current research, smoking can decline the cognitive functions.

This paper presents some results from a computational fluid dynamics (CFD) model of a multi-megawatt crosswind kite spinning on a circular path in a straight downwind configuration. The unsteady Reynolds averaged Navier-Stokes equations closed by the k−ω SST turbulence model are solved in the three-dimensional space using ANSYS Fluent. The flow behaviour is examined at the rotation plane, and the overall (or global) induction factor is obtained by getting the weighted average of induction factors on multiple annuli over the swept area. The wake flow behaviour is also discussed in some details using velocity and pressure contour plots. In addition to the CFD model, an analytical model for calculating the average flow velocity and radii of the annular wake downstream of the kite is developed. The model is formulated based on the widely-used Jensen’s model (Technical Report Risø-M; No. 2411, 1983), which was developed for conventional wind turbines, and thus has a simple form. Expressions for the dimensionless wake flow velocity and wake radii are obtained by assuming self-similarity of flow velocity and linear wake expansion. Comparisons are made between numerical results from the analytical model and those from the CFD simulation. The level of agreement was found to be reasonably good. Such computational and analytical models are indispensable for kite farm layout design and optimization, where aerodynamic interactions between kites should be considered.

One of the major problems caused by repeated subcutaneous insulin injections in diabetic patients is insulin amyloidosis. Understanding the molecular mechanism of amyloid fibril formation of insulin and finding effective compounds to its inhibit or eliminate is very important and extensive research has been done on it. In this study, the anti-amyloidogenic and destabilizing effects of the pyrogallol, as a phenolic compound, on human insulin protein were investigated by CR absorbance, ThT and ANS fluorescence, FTIR spectroscopy and atomic force microscopy. According to the obtained results, the formation of amyloid fibrils at pH 2.0 and 50 °C was confirmed by CR, ThT, ANS, FTIR assays. Microscopic images also showed the twisted and long structures of amyloid fibrils. Simultaneous incubation of the protein with pyrogallol at different concentrations reduced the intensities of CR, ThT and ANS in a dose-dependent manner and no trace of fibrillar structures was observed in the microscopic images. FTIR spectroscopy also showed that the position of amide I band in the spectrum of samples containing pyrogallol was shifted. Based on the findings in this study, it can be concluded that pyrogallol can be effective in preventing and suppressing human insulin amyloid fibrils.

CO2 injection into geological formations is considered one way of mitigating the increasing levels of carbon dioxide concentrations in the atmosphere and its effect on and global warming. In regard to sequestering carbon underground, different countries have conducted projects at commercial scale or pilot scale and some have plans to develop potential formations for carbon dioxide storage. In this study, pure CO2 injection is examined on a model with the properties of bunter sandstone and then sensitivity analyses were conducted for some of the important parameters. The results of this study show that the extent to which CO2 has been convected in the porous media in the reservoir plays a vital role in improving the CO2 dissolution in brine and safety of its long term storage. We conclude that heterogeneity plays a crucial role on the saturation distribution and can increase or decrease the amount of dissolved CO2 in water. Furthermore, the value of absolute permeability controls the effect of the Kv/Kh ratio on the CO2 dissolution in brine. In other words, as the value of vertical and horizontal permeability decreases (i.e. tight reservoirs) the impact of Kv/Kh ratio on the dissolved CO2 in brine becomes more prominent. Additionally, reservoir engineering parameters, such as well location, injection rate and scenarios, also have a high impact on the amount of dissolved CO2.

Background and Aim: Cancer is a disease characterized by uncontrolled cell growth and invasion of tissues. It seems that personality differences and psychological factors are important factors that lead to different reactions to cancer. Therefore, the main purpose of the present study was to investigate the relationship between type D, stress level of life events, personality traits, and anxiety sensitivity in people with breast cancer attending to Tehran Bu-ali Hospital. Methods: The study was a correlational study in which 100 cancer patients referred to Bu-ali Hospital in Tehran, selected by the available sampling method from April to June 2018. The tools used included the Denollet DS-14 Type D Questionnaire, the Paykel Life events Questionnaire, the Eysenck Personality Questionnaire, the ASI Anxiety Scale, Floyd et al., Data analysis in this study is taken place by using SPSS software, two descriptive levels (percentage, frequency, etc.) and regression. Results: The study results showed that there is a relationship between type D personality with stress of life events, neurosis, extraversion, and psychopath dimensions of personality and anxiety sensitivity in breast cancer patients. Conclusion: Psychological factors play a role in the incidence and exacerbation of breast cancer, and ultimately patients with personality type D and personality traits such as psychosis and high anxiety sensitivity and more stress of life events show more symptoms.

An in-depth study of the failure of granular materials, which is known as a mechanism to generate defects, can reveal the facts about the origin of the imperfections such as cracks in the carbon anodes. The initiation and propagation of the cracks in the carbon anode, especially the horizontal cracks below the stub-holes, reduce the anode efficiency during the electrolysis process. In order to avoid the formation of cracks in the carbon anodes, the failure analysis of coke aggregates can be employed to determine the appropriate recipe and operating conditions. In this paper, it will be shown that a particular failure mode can be responsible for the crack generation in the carbon anodes. The second-order work criterion is employed to analyze the failure of the coke aggregate specimens and the relationships between the second-order work, the kinetic energy, and the instability of the granular material are investigated. In addition, the coke aggregates are modeled by exploiting the discrete element method (DEM) to reveal the micro-mechanical behavior of the dry coke aggregates during the compaction process. The optimal number of particles required for the failure analysis in the DEM simulations is determined. The effects of the confining pressure and the strain rate as two important compaction process parameters on the failure are studied. The results reveal that increasing the confining pressure enhances the probability of the diffusing mode of the failure in the specimen. On the other hand, the increase of strain rate augments the chance of the strain localization mode of the failure in the specimen.

Geometallurgy has become an important toll to predict the process behavior of the ores, and to decrease the production risks cause by variability of geological settings. In this paper geometallurgical index for grinding properties of the ore has investigated. In a comprehensive research at Sarcheshmeh porphyry copper mine, geological features, what were supposed to affect the main process responses including product’s grade-recovery, and plant’s throughput, were subjected to investigate as the possible geometallurgical indexes. The rock breakage variability, in terms of a ball mill grinding circuit and its effects on the plant throughput and energy consumption are presented. Ninety samples were collected based on geological features including lithology, hydrothermal alteration, and geological structures. The samples were characterized using XRD, XRF, and electron and optical microscopy. A simulated test method for Bond ball mill work index (BWI) was used to perform the comminution test. The results showed BWI values vary from 5.67 kWh/t to 20.21 kWh/t. Examination of the possible correlations between BWI and the geological features showed that the key geological feature related to comminution variability is lithology. In addition, the hydrothermal alteration would be an effective parameter in the period that the plant is fed with a single lithology

Manufacturing environments, characterized by rapid, unpredictable changes, uncertainties, risks, and uncontrollable fluctuations, pose significant challenges to minimizing disruptions in processes. This study introduces an innovative approach that prioritizes curbing risk propagation among processes to enhance robustness. It emphasizes the integration of engineering management principles and modular design within manufacturing. Adopting a system engineering perspective, all manufacturing process activities are viewed as interrelated components within a unified system. By employing Axiomatic Design (AD) theory and the Design Structure Matrix (DSM) method, manufacturing process architecture is modularized, yielding heightened robustness. The proposed mathematical model equips engineering and manufacturing managers with a potent tool for designing robust processes while adeptly managing system complexity. The study's outcomes underscore a substantial enhancement in modularization, leading to elevated overall robustness in manufacturing processes. To validate the methodology, the architectural design of manufacturing processes is examined in a real-case scenario, specifically the Barez Industrial Group in Iran. This verification substantiates the 'manufacturing processes' of the case, presenting an optimally modularized architecture. The results affirm the proposed approach's efficacy, demonstrating improved modularization that contributes to bolstered robustness in manufacturing processes.

Cry toxins produced by the bacterium Bacillus thuringiensis are of significant agronomic value worldwide due to their potent and highly specific activity against various insect orders. However, some of these pore-forming toxins display specific activity against a range of human cancer cells whilst possessing no known insecticidal activity, Cry41Aa is one such toxin. Cry41Aa has similarities to its insecticidal counterparts in both its 3-domain toxic core structure and pore-forming abilities, but how it has evolved to target human cells is a mystery. This work shows that some insecticidal Cry toxins can enhance the toxicity of Cry41Aa against hepatocellular carcinoma cells, despite possessing no intrinsic toxicity themselves. This interesting crossover is not limited to human cancer cells, as Cry41Aa was found to inhibit some Aedes-active Cry toxins in mosquito larval assays. Here, we present findings that suggest that Cry41Aa shares a receptor with several insecticidal toxins indicating a stronger evolutionary relationship than their divergent activities might suggest.

Olive fruits at different ripening stages give rise to various table olive products and oil qualities. Therefore, developing an efficient method for recognizing and sorting olive fruits based on their ripening stages can greatly facilitate postharvest processing. This study introduces an automatic computer vision system that utilizes deep learning technology to classify the `Roghani` Iranian olive cultivar into five ripening stages using color images. The developed model employs convolutional neural networks (CNN) and transfer learning based on the Xception architecture and ImageNet weights as the base network. The model was fine-tuned by testing multiple configurations of well-known CNN layers. To minimize overfitting and enhance model generality, data augmentation techniques were employed. By considering different optimizers and two image sizes, four final candidate models were generated. These models were then compared in terms of loss and accuracy on the test dataset, classification performance (classification report and confusion matrix), and generality. All four candidates exhibited high accuracies ranging from 86.93% to 93.46% and comparable classification performance. In all models, at least one class was recognized with 100% accuracy. However, by taking into account the risk of overfitting, two models were discarded. Finally, a model with an image size of 224 × 224 and an SGD optimizer, which had a loss of 1.23 and an accuracy of 86.93%, was selected as the preferred option. The results of this study offer robust tools for automatic olive sorting systems, simplifying the differentiation of olives at various ripening levels for different post-harvest products.

An investigation of compressible flow over two-dimensional obstacles is presented in this paper. When shock waves are formed on surfaces due to compressibility and these shocks interfere with the boundary layer, undesirable effects such as friction, separation, and flow instability occur. To weaken the shock and reduce its effects, various methods have been employed in the past, including surface suction, surface blowing, and vortex generators. Using numerical solutions, the present work attempts to reduce the negative effects of the shock generated by the obstacle by creating porosity on its surface. Numerical methods such as the finite volume method and the Navier-Stokes equations as well as the Spalart-Allmaras model are used. By creating suction and blowing and increasing the cross-sectional area of the flow, porous surfaces reduce the effects of shock. Achieving around 50% porosity on the obstacle weakened the shock and reduced the Mach number after it, according to this paper's results. Also, the area under the skin friction diagram has decreased by about 38% as a result of less interference between the shock and the boundary layer and blowing caused by the porous surface.

In this paper, we demonstrate a useful interaction between the theory of clique partitions, edge clique covers of a graph, and the spectra of graphs. Using a clique partition and an edge clique cover of a graph we introduce the notion of a vertex-clique incidence matrix for a graph and produce new lower bounds for the negative eigenvalues and negative inertia of a graph. Moreover, utilizing these vertex-clique incidence matrices, we generalize several notions such as the signless Laplacian matrix, and develop bounds on the incidence energy and the signless Laplacian energy of the graph. %The tight upper bounds for the energies of a graph and its line graph are given. More generally, we also consider the set $S(G)$ of all real-valued symmetric matrices whose off-diagonal entries are nonzero precisely when the corresponding vertices of the graph are adjacent. An important parameter in this setting is $q(G)$, and is defined to be the minimum number of distinct eigenvalues over all matrices in $S(G)$. For a given graph $G$ the concept of a vertex-clique incidence matrix associated with an edge clique cover is applied to establish several classes of graphs with $q(G)=2$.

Although, promotion of urbanization culture in recent decades has made inevitable development of cities in the world, however, the development can be guided in a direction that leave, to the extent possible, minimum socioeconomic and environmental impacts. For this, it is required to first forecast auto-spreading orientation of cities and suburbs in rural areas over time and then avoid shapeless growth of cities. This paper is an attempt to develop a dynamic hybrid model based on logistic regression (LR), Markov chain (MC), and cellular automata (CA) for prediction of future urban sprawl in fast-growing cities. The model was developed using 12 widely-used urban development criteria, whose significant coefficient was determined by logistic regression, and validated by relative operating characteristic (ROC) analysis. The validated model was run in Guilan, a tourist province in northern Iran with a very high rate of urban development. For this, changes in the area of urban land use were detected over the period of 1989 to 2013 and then, future sprawl of the province was forecasted by the years 2025 and 2037. The analysis results revealed that the area of urban land use was increased by more than 1.7 % from 36012.5 ha in 1989 to 59754.8 ha in 2013, and the area of Caspian Hyrcanian forestland was reduced by 31628 ha. The results also predicted an alarming increase in the rate of urban development in the province by the years 2025 and 2037, during which urban land use is predicted to develop 0.9 % and 1.38 %, respectively. The development pattern is expected to be uneven and scattered, without following any particular direction. The development will occur close to the existing or newly-formed urban basements as well as around major roads and commercial areas. This development, if not controlled, will lead to the loss of 13863 ha of Hyrcanian forests and if the trend continues, 21013 ha of Hyrcanian forests and 20208 ha of Barren/open lands are expected to be destroyed by the year 2037. In general, the proposed model is an efficient tool for the support of urban planning decisions and facilitates the process of sustainable development of cities by providing decision-makers with an overview on future development of cities where the growth rate is very fast.

COVID-19 is a severe global problem, and AI can play a significant role in preventing losses by monitoring and detecting infected persons in early-stage. This paper aims to propose a high-speed and accurate fully-automated method to detect COVID-19 from the patient's CT scan images. We introduce a new dataset that contains 48260 CT scan images from 282 normal persons and 15589 images from 95 patients with COVID-19 infections. At the first stage, this system runs our proposed image processing algorithm to discard those CT images that inside the lung is not properly visible in them. This action helps to reduce the processing time and false detections. At the next stage, we introduce a novel method for increasing the classification accuracy of convolutional networks. We implemented our method using the ResNet50V2 network and a modified feature pyramid network alongside our designed architecture for classifying the selected CT images into COVID-19 or normal with higher accuracy than other models. After running these two phases, the system determines the condition of the patient using a selected threshold. We are the first to evaluate our system in two different ways. In the single image classification stage, our model achieved 98.49% accuracy on more than 7996 test images. At the patient identification phase, the system correctly identified almost 234 of 245 patients with high speed. We also investigate the classified images with the Grad-CAM algorithm to indicate the area of infections in images and evaluate our model classification correctness.

Compton cameras detect scattered gamma rays and estimate the distribution of gamma-ray sources. Nonetheless, crafting a camera tailored to a specific application presents formidable challenges, often necessitating the implementation of diverse image reconstruction techniques. Delving into the factors influencing these cameras can pave the way for design optimization and performance enhancement. This study introduces an inventive detector design for Compton imaging systems, building upon the achievements of prior designs. The proposed system contains eight scatterer detectors and a semiconductor absorber detector, spaced at 1 mm and 30 mm intervals, respectively. The source-to-first-scatterer-detector distance is 5 mm, with scatterer and absorber detector plates measuring 70× 70× 2.125 mm³ and 70× 70× 10 mm³, respectively. Geant4 simulation toolkit models the Compton imaging system, and an analytical method reconstructs Compton camera images. Unlike more straightforward techniques, the analytical method directly reconstructs Compton camera images by solving the equation relating to the reflected image data. This approach is implemented in the C++ programming language. The study's findings reveal that the analytical method discerns optimal conditions and parameters that significantly influence efficiency, yielding a full width at half maximum (FWHM) of 3.7 mm with an angular uncertainty of approximately 2.7 degrees at an energy level of 0.662 MeV. Compared to another experimental design employing the analytical image reconstruction approach, the FWHM value decreased by 0.7 mm. This study presents an innovative detector design and an analytical reconstruction method for Compton imaging systems, showcasing improved efficiency and accuracy.

This study will lead to the development of a numerical data set that will assist in the design of Savonius wind turbines. A major objective of this study is to develop a better design for Savonius turbine blades in order to increase their torque coefficients, rotational speeds, and pressure coefficients. As part of the experimental design methodology, a full dataset was generated by simulating three-dimensional scale models utilizing computational fluid dynamics (CFD) simulations that were validated by wind tunnel data. This process is multi-objective optimization for optimizing turbine performance. The twist angle, aspect ratio, and overlap ratio are all important factors in determining the optimal torque and power coefficients. The group method of data handling (GMDH) algorithm was utilized to model objective functions based on input-output data. The Pareto fronts were plotted using polynomial models obtained from the evolutionary Pareto-based optimization approach (modified NSGA-II), and the optimal commercial points were determined using TOPSIS. A comparison of three- and two-objective optimization data revealed that two-objective optimization data lie within the boundaries of a three-objective optimization problem. The torque coefficient, rotational speed, and power coefficient are all improved by 13.74%, 0.071%, and 5.32%, respectively, using multi-objective optimization. As a result of the multi-objective optimization of the turbine, some significant characteristics of objective functions were discovered.

Introduction: Circulating tumor DNA (ctDNA) is newly diagnosed tumor DNA that can easily represent a tumor’s genetic and epigenetic change. Pheochromocytomas (PCCs) and Paragangliomas (PGLs) are rare tumors of adrenal gland tissue that have the potential to be detected by ctDNA. We aimed to study the potential of the methylation status of RDBP, SDHB, and SDHC genes in ctDNA of PCCs/PGLs patients as a diagnostic biomarker. Materials and Methods: Clinical data, fresh frozen tissue, the blood of 12 PCCs/PGL patients, and the blood of 12 age/sex-matched normal patients were collected. The methylation status of RDBP, SDHB, and SDHC was compared between cases and controls by MS-HRM analysis. Results: Amongst six promoter regions of RDBP, SDHB, and SDHC, promoter methylation quantification of SDHCa and RDBPb was significantly different between PCCs/PGLs and controls. SDHCa was methylated in 49.93% of PCCs/PGLs cases vs. 8.33 % of control samples, p-value: 0.026, area under curve AUC=0.757, and RDBPb in 74.9% of PCCs/PGLs cases vs. 25.0% of control samples, p-value: 0.032, AUC=0.750. Conclusions: This study suggests the ctDNA potential for a less invasive source of tumor epigenetic modification in PCCs/PGLs malignancies. The SDHCa and RDBPb hypermethylation warrant further exploration as diagnostic tools for PCCs/PGLs.

The main objective of this study was to compare the removal efficiency of nutrients using Lactuca sativa, Medicago sativa and Phragmites australis in subsurface flow constructed wetlands with horizontal flow. In order to test water quality, fabricated reactors designed and the plants cultivated in the soil while their root were inside the wastewater. A long time study carried out from spring till end of autumn (9 months) in order to evaluate the difference in removal rate based on the seasonal changes. The highest removal rate was during summer which followed by spring and autumn. Thus, the effect of plants on the removal efficiency of organic matter (COD, BOD), TSS and nutrient (P and TN) appeared to be dependent on the seasonal growth. Phragmites australis the most sensitive species in order the removal of nutrient from wastewater.

The extrusion-based additive manufacturing is a popular fabrication method, which has attracted the attention of various industries due to its simplicity, cheapness, ability to produce complex geometric shapes, and high production speed. One of the effective parameters in this process is the feed of filament that is presented in the production G-code. The feed of filament is calculated according to the layer height, the extrusion width and the length of printing path. All the required motion paths and filling patterns created by commercial software are a set of straight lines or circular arcs that are placed next to each other at a fixed distance. In special curved paths, the distance of adjacent ones is not equal at different points, and due to the weakness of common commercial software, it is not possible to create curved paths for proper printing. Therefore, making a special computer code that can be used to create various functions of curved paths is investigated in this research, and also the feed of filament parameter is studied in detail. Next, by introducing a correction technique, the feed of filament is changed during the curved path to distribute the polymer material uniformly. Finally, composite samples (which have variable stiffness) consisting of curved fibers are produced with the proposed method, and the high quality of printed samples confirm the suggested code and technique.

Prediction of stock groups values has always been attractive and challenging for shareholders. This paper concentrates on the future prediction of stock market groups. Four groups named diversified financials, petroleum, non-metallic minerals and basic metals from Tehran stock exchange are chosen for experimental evaluations. Data are collected for the groups based on ten years of historical records. The values predictions are created for 1, 2, 5, 10, 15, 20 and 30 days in advance. The machine learning algorithms utilized for prediction of future values of stock market groups. We employed Decision Tree, Bagging, Random Forest, Adaptive Boosting (Adaboost), Gradient Boosting and eXtreme Gradient Boosting (XGBoost), and Artificial neural network (ANN), Recurrent Neural Network (RNN) and Long short-term memory (LSTM). Ten technical indicators are selected as the inputs into each of the prediction models. Finally, the result of predictions is presented for each technique based on three metrics. Among all algorithms used in this paper, LSTM shows more accurate results with the highest model fitting ability. Also, for tree_based models, there is often an intense competition between Adaboost, Gradient Boosting and XGBoost.

The regulatory mechanism of PCSK7 gene is still unknown, although its encoded protein PC7 is the most ancient and highly conserved of all proprotein convertases and exhibits enzymatic and non-enzymatic functions in liver triglyceride regulation. Bioinformatics algorithms were used to predict regulatory microRNAs (miRNAs) of PCSK7 expression. This led to the identification of 4 miRNAs, namely miR-125a-5p, miR-143-3p, miR-409-3p, and miR-320a-3p, with potential binding sites on the 3’-untranslated region (3′-UTR) of human PCSK7 mRNA. The expression patterns of these miRNAs and PCSK7 mRNA were assessed in three different cell lines with quantitative polymerase chain reaction (qPCR), which revealed reciprocal expression patterns between the expression levels of the four selected miRNAs and PCSK7. Next, the interactions and effects of these miRNAs on PCSK7 expression levels were investigated via cell-based expression analysis, dual-luciferase assay, and Western blot analysis. The data revealed that PCSK7 mRNA levels decreased in cells transfected with vectors overexpressing miR-125a-5p, miR-143-3p, and miR-409-3p, but not miR-320a-3p. The dual-luciferase assay demonstrated that the above 3 miRNAs could directly interact with putative target sites in PCSK7 3′-UTR and regulate its expression, whereas miR-320-3p exhibited no interaction. Western blot analysis further revealed that overexpression of miR-125a-5p in Huh7 cells inhibits the expression and ability of PC7 to cleave human transferrin receptor 1. Our results support a regulatory role of these miRNAs in PCSK7 expression and function and opens the way to assess their roles in the regulation of PC7 activity in vivo in the development of hepatic steatosis.

Abstract: Polylactic acid (PLA) is brittle in nature with extensive deformation property. For improvement of the end-use quality, it is of significant importance to enhance the producibility of fused deposition modeling (FDM)-printed objects in PLA. The purpose of this investigation is to boost toughness and to reduce the production cost of the FDM-printed tensile test samples with the desired part thickness. To attain the research purpose number of experiments are designed and analyzed by the Response Surface Method (RSM). The statistical analysis is performed to deal with this concern considering layer thickness, infill percentage, and extruder temperature as controlled factors. The tensile test specimens are printed based on the designed experiments, and the tensile strength tests are conducted by SANTAM 150 universal testing machine based on ASTM D638. The honeycomb internal fill pattern is applied for the production of light-weight and high-strength specimens. The area under Force- Extension curve up to fracture is acquired as the toughness of the printed specimens. This study also developed a modeling process using ANN and ANN-GA techniques for developing an accurate estimation for toughness, part thickness, and production cost as dependant variables. Results were evaluated by correlation coefficient and RMSE values. According to the modeling results, ANN-GA as a hybrid ML technique could successfully improve the accuracy of modeling about 7.5, 11.5 and 4.5 % for toughness, part thickness, and production cost, respectively, in comparison with those for the single ANN method. In the other side, the optimization results confirm that the optimized specimen is cost-effective and able to comparatively undergo deformation, which develops the usability of printed PLA objects. The research is accomplished under the constraints of PLA compatibility with existing fused deposition modeling setup without changing the functional hardware/software of the machine. Although the mechanical properties and dimensional accuracy of PLA have already been studied, there is little literature on the toughness of the printed PLA with honeycomb internal fill pattern.

In areas with a deep floor plan, the distribution of natural light is not uniform. Consequently, relying solely on daylight may not suffice to meet the space's lighting requirements, necessitating the use of artificial lighting in darker areas. Therefore, a lighting system is needed that not only controls the glare near the windows but also increases the light at the end of the room and provides uniform daylight. One of the widely used systems is the “light shelf“which has three main functions: shading, increasing the depth of light penetration and reducing glare. Review articles about light shelves have been done in 2015 and 2017, while more than 80% of the studies have been carried out since 2016 and light shelves with more diverse forms and dynamic elements and many consolidations were proposed. Therefore, there is a need for a more comprehensive review. The main question of this research is how different parameters (including climate, material, ceiling and integrated systems) can help to increase the efficiency of light shelves. By using a systematic review, studies in the past three decades were classified in order to determine the effect of these parameters on improving lighting performance and controlling solar heat gain.

In future automated vehicles we will often engage in non-driving tasks and will not watch the road. This will affect postural stabilization and may elicit discomfort or even motion sickness in dynamic driving. Future vehicles shall accommodate this by properly designed seats and interiors whereas comfortable vehicle motion shall be achieved with smooth driving styles and well de-signed (active) suspensions. To support research and development in dynamic comfort, this paper presents validation of a multi-segment full body human model including visuo-vestibular and muscle spindle feedback for postural stabilization. Dynamic driving is evaluated using a “sicken-ing drive” including a 0.2 Hz 4 m/s2 slalom. Vibration transmission is evaluated with compliant automotive seats, applying 3D platform motion and evaluating 3D translation and rotation of pelvis, trunk and head. The model matches human motion in dynamic driving and reproduces fore-aft, lateral and vertical oscillations. Visuo-vestibular and muscle spindle feedback are shown to be essential in particular for head-neck stabilization. Active leg muscle control at the hips and knees is shown to be essential to stabilize the trunk in the high amplitude slalom condition but not in low amplitude horizontal vibrations. However, active leg muscle control can strongly affect 4-6 Hz vertical vibration transmission. Compared to the vibration tests, the dynamic driving tests show enlarged postural control gains to minimize trunk and head roll and pitch, and to align head yaw with the driving direction. Human modelling can create the required insights to achieve breakthrough comfort enhance-ments while enabling efficient development for a wide range of driving conditions, body sizes and other factors. Hence, modelling human postural control can accelerate innovation of seats and vehicle motion control strategies for (automated) vehicles.

This work is related to the environmental toxicology risk assessment and evaluation of possible transformation of carbon-based nanomaterials (CNMs) after the contact with marine microalgae. The materials used in the study represent common and widely applied multiwalled carbon nanotubes (CNTs), fullerene (C60), graphene (Gr), and graphene oxide (GrO). The toxicity was evaluated as growth rate inhibition, esterase activity, membrane potential, and reactive oxygen species generation changes. The measurement was performed with flow cytometry after 3, 24, 96 h, and 7 days. Biotransformation of nanomaterials were evaluated after 7 days of microalgae cultivation with CNMs by FTIR and Raman spectroscopy. The calculated toxic level (EC50 in mg/L, 96 h) of ued CNMs reduced in the following order: CNTs (18.98) &gt; GrO (76.77) &gt; Gr (159.40) &gt; C60 (414.0). Oxidative stress and membrane depolarization was the main toxic action of CNTs and GrO. At the same time, Gr and C60 decreased the toxic action with time and had no negative impact on microalgae even at concentration of 125 mg/L. Moreover, C60 and Gr after seven days of the contact with microalgae cells obtained structural deformations.

The high figure of merit and earth abundance of Cu₁₂Sb₄S₁₃ thermoelectric ma- terials have recently attracted many attentions toward these type of complex compounds. Intrinsic low thermal conductivity, as well as tunable electronic transport properties, make them suitable for thermoelectric power generation. In this study, we perform a comparative theoretical study on the substituted compounds, primarily at the Cu site including known tetrahedrite Cu₁₂Sb₄S₁₃, by means of first-principles calculations. The density functional theory of electric structure is applied to investigate the result of substitution.

Renewable jet fuel (RJF) production has been recognized as a promising approach for reducing the aviation sector's carbon footprint. Over the last decade, commercial production of RJF has piqued the interest of airlines and governments around the world. However, RJF production can be challenging due to its dispersed supply resources. Furthermore, the production of RJF is more costly compared to producing conventional jet fuel. In this study, using a mixed integer linear program (MILP), we design an RJF supply chain network in which we obtain an optimized configuration of the supply chain and determine operational decisions required to meet RJF demand at airports. To accelerate commercialization of RJF production, we considered four different monetary incentive programs, which could cover the supply chain’s costs. This study is validated by employing the model to design an RJF supply chain in the Midwestern US. Results from this study are promising as they show the supply chain can achieve commercialization with partial financial coverage from the incentive programs. Based on the findings of this study, policymakers can devise policies to commercialize RJF production and accelerate its adoption by industry.

In this paper, a fuzzy logic-based energy management system and multi-port quasi-z-source converter are proposed that utilizes hybrid renewable energy sources. The system ensures that each energy source module can be used individually by employing fuzzy logic to define power modes. This approach also helps prevent switching losses resulting from extra switching of the source modules. Also, the proposed energy management does not have a mathematical model, so applicability is simple and it is suitable for different multiple input topologies. The Mamdani fuzzy inference system can be designed to capture the nonlinear behavior of the system because of the linguistic rules. Moreover, by adopting the quasi-z-source network to the end of the multi-port converter, the switching losses of the multi-port modules have been significantly reduced. The simulation results are obtained using MATLAB Simulink, and the experimental results are obtained by connecting the circuit to MATLAB Simulink via an Arduino Due.

Studying Active Transportation (AT) is widespread in America and Europe's research and stud-ies that include Latent variables (LV) are growing to identify exact results of finding what to do to increase the utility of AT. LVs help us to have more accurate research. LVs are defined as psy-chological factors like feeling safe while you ride at night and thus they are not subjective and hard to understand but very important to increase the utility of using AT modes. In this study, most of the previous studies about bicycling have been reviewed. In this research, different var-iables including subjective and LVs are conducted for maximizing the use of bicycle utility and introduced to have better sight for future researchers to deal with modeling AT mode choice. Results represent the importance of having 'will' for using a bicycle, especially in difficult situa-tions and cultural barriers that affect the cycling of women.

Population growth and increasing global demand for freshwater have raised a serious challenge for the depleting sources of freshwater in the 21st century. Desalination technologies can be a reliable technique for providing freshwater. Capacitive deionization is one of the innovative desalination methods that has received increasing interest. Flow-electrode capacitive deionization (FCDI) (a new architecture of capacitive deionization) is one of the efficient, cost-effective, and environmentally-friendly desalination methods for freshwater production. In this experimental research, the performance of an FCDI system was investigated and the influence of important parameters such as flow rate of flow-electrodes, electrolyte salt concentration of flow-electrodes, and initial feed water concentration will be assessed on the efficiency of desalination operation. In this study, the flow-electrodes operated in short-circuited closed-cycle operation (SCC) mode, and also the feed water operated similarly to the flow-electrodes in closed-cycle. Moreover, in all the experiments, the salt adsorption capacity (SAC) and salt removal efficiency (SRE) was calculated. Herein, by optimizing the above mentioned parameters, the salt removal efficiency of 83% and a SAC value of 29.12 mg/g dry carbon were achieved in 5 hours.

Flood routing in flood forecasting issue, calculation the height of flood bands, determining the river boundaries, and estimation of protective facilities for flood –exposed building is applicable. In many cases, due to the lack of measuring stations, the status of the upstream flood generating hydrograph is not known. The purpose of this study is to present an integrated method comprising of an optimization model and a hydrodynamic numerical model for flood modeling to determine the upstream hydrograph using the provided hydrograph at the downstream measuring station of a river. The routing procedure consists of three steps: (1) generating a hypothetical upstream hydrograph using genetic algorithm method; (2) hydrodynamic modeling using a numerical simulation model for flood routing according to the hypothetical hydrograph which is generated in the first step; (3) compare the calculated and observed hydrograph in downstream by using a fitness function. This recommended procedure was named as Reverse Flood Routing Method (RFRM) and was then applied to Karun River, the largest river in Iran. Comparing the generated upstream hydrograph by the RFRM model with the corresponding measured hydrograph at Ahvaz hydrometric station, as an ungauged river location, shows the high accuracy of the recommended model in this study.

The construction industry is one of the most fatal industries, so it is important to pay more attention to safety solutions. Even though work-related accidents are known as major waste in construction projects, little attention has been paid so far to incorporating safety into the lean construction framework. In this research, lean construction theory is reviewed through the lens of safety. That being so, the identified challenges in previous research on improving safety in construction projects are categorized and those related to the concept of lean project delivery are introduced. Then, the principles of the lean construction framework are explained and the relevant changes for incorporating safety into the framework are introduced and discussed. It is expected that this hybrid model would further enrich the lean construction framework. The careful attention of project executives to this model may improve the safety situation in construction projects.

The growing production and application of carbon-based nanomaterials (CNMs) represent possible risks for aquatic systems. However, the variety of CNMs with different physical and chemical properties, and different morphology complicated the understanding of their potential toxicity. This paper aims to evaluate and compare the toxic impact of four most common CNMs, namely multiwalled carbon nanotubes (CNTs), fullerene (C60), graphene (Gr), and graphene oxide (GrO) in marine microalgae Porphyridium purpureum. The microalgae cells were exposed to the CNMs for 96 h and measured by flow cytometry. Based on the obtained results, we determined no observed effect level (NOEL), calculated EC10 and EC50 concentrations for growth rate inhibition, esterase activity, membrane potential, and reactive oxygen species (ROS) generation changes for each tested CNMs. According to the sensitivity (growth rate inhibition) of P. purpureum, the used CNMs can be listed in following order: CNTs &gt; GrO &gt; Gr &gt; C60. The toxicity of CNTs was significantly higher than the toxic effect of the other used CNMs and only this sample caused increase of ROS generation in microalgae cells. This effect caused by trace metal residuals in CNTs and high affinity between particles and microalgae associated with the presence of exopolysaccharide coverage on P. purpureum cells.

Wind power as a renewable source of energy, has numerous economic, environmental and social benefits. In order to enhance and control the renewable wind power, it is vital to utilize models that predict wind speed with high accuracy. Due to neglecting of requirement and significance of data preprocessing and disregarding the inadequacy of using a single predicting model, many traditional models have poor performance in wind speed prediction. In the current study, for predicting wind speed at target stations in the north of Iran, the combination of a multi-layer perceptron model (MLP) with the Whale Optimization Algorithm (WOA) used to build new method (MLP-WOA) with a limited set of data (2004-2014). Then, the MLP-WOA model was utilized at each of the ten target stations, with the nine stations for training and tenth station for testing (namely: Astara, Bandar-E-Anzali, Rasht, Manjil, Jirandeh, Talesh, Kiyashahr, Lahijan, Masuleh and Deylaman) to increase the accuracy of the subsequent hybrid model. Capability of the hybrid model in wind speed forecasting at each target station was compared with the MLP model without the WOA optimizer. To determine definite results, numerous statistical performances were utilized. For all ten target stations, the MLP-WOA model had precise outcomes than the standalone MLP model. The hybrid model had acceptable performances with lower amounts of the RMSE, SI and RE parameters and higher values of NSE, WI and KGE parameters. It was concluded that WOA optimization algorithm can improve prediction accuracy of MLP model and may be recommended for accurate wind speed prediction.

Malaysian healthcare institutions still use ineffective paper-based vaccination systems to manage childhood immunization schedules. This may lead to missed appointments, incomplete vaccinations, and outbreaks of preventable diseases among infants. To address this issue, we proposed a text messaging vaccination reminder and recall system named Virtual Health Connect (VHC) to simplify and accelerate the immunization administration for nurses that may result in improving the completion and timeliness of immunizations among infants. Considering the narrow research about the acceptance of these systems in the healthcare sector, we examined factors influencing nurses’ attitude and intention to use VHC using the extended technology acceptance model (TAM). The novelty of the conceptual model is proposing new predictors of attitude, namely, perceived compatibility and perceived privacy and security issues. We conducted a survey among 121 nurses in Malaysian government hospitals and clinics to test the model. We analyzed the collected data using partial least squares-structural equation modeling (PLS-SEM) to examine the significant factors influencing nurses’ attitude and intention to use VHC. Moreover, we applied artificial neural network (ANN) to determine the most significant factors of acceptance with higher accuracy. Therefore, we could offer more accurate insights to decision-makers in the healthcare sector for the advancement of health services. Our results highlighted that the compatibility of VHC with the current work setting of nurses developed their positive perspectives toward the system. Moreover, the nurses felt optimistic about the system when considering it to be useful and easy to use in the workplace. Finally, their attitude toward using VHC played a pivotal role in raising their intention. Based on the ANN models, we also found that perceived compatibility was the most significant factor influencing nurses' attitude towards using VHC, followed by perceived ease of use and perceived usefulness.

Energy storage systems (ESSs) are the key elements to improve the operation of power systems. On the other hand, these elements challenge the power system planners. The difficulties arise as a result of the ESSs' economic and technological features. The cycle life of ESSs is a critical aspect that influences the choices made during expansion planning processes. In this manuscript, we have focused on a new model for the expansion planning of ESSs considering the impacts of technical properties, such as the cycle life and depth of discharge. For this purpose, the proposed model consists of the hourly operation planning of ESSs in the sample days of year. A new indicator is proposed to determine the daily charging/discharging cycles of ESSs. Numerical results show the ability of the proposed model to determine the optimal technology and capacity of ESSs.

Appropriate estimation of soil settlement is of significant importance since it directly influences the performance of building and infrastructures that are built on soil. In particular, the settlement of fine-grained soils is critical because of low permeability and continuous settlement with time. Coefficient of consolidation (C_c) is a key parameter to estimate settlement of fine-grained soil layers. However, estimation of this parameter is time consuming, needs skilled technicians, and specific equipment. In this study, C_c was estimated using several soil parameters such as liquid limit (LL), plastic limit (PL), and initial void ratio (e₀). Estimating such parameters in laboratory is straight forward and needs substantially less time and cost compared to conventional tests to estimate C_c such as oedometer test. This study presents a novel prediction model for C_c of fine-grained soils using gene-expression programming (GEP). GEP is a biologically inspired technique capable of offering closed-form solution for the optimal solution. A database consisted of 108 different data points was used to develop the model. A closed-form equation solution was derived to estimate C_c based on LL, PL, and e₀. The performance of developed GEP-based model was evaluated through coefficient of determination (R²), root mean squared error (RMSE), and mean average error (MAE). High R² and low error values indicated the descent performance of the model. Furthermore, the model was evaluated using the additional performance measures and met all the suggested criteria. Furthermore, the model had a better performance in terms of R², RMSE, and MAE compared to most of existing models. It is expected that the developed model will decrease the time and cost associate with determining C_c of fine-grained soils.Keywords: evolutionary model, gene-expression programming (GEP), prediction, soil compression index, estimation, soil engineering, soil informatics, civil engineering, machine learning, data science, big data, soft computing, deep learning, forecasting, subject classification codes, construction informatics, computational intelligence (CI), artificial intelligence (AI), estimation

As 180-degree meanders are observed in abundance in nature, a meandering channel with two consecutive 180-degree bends was designed and constructed to investigate bed topography variations. These two 180-degree mild bends are located between two upstream and downstream straight paths. In this study, different mean velocity to critical velocity ratios have been tested at the upstream straight path to determine the meander's incipient motion. To this end, bed topography variations along the meander and the downstream straight path were addressed for different mean velocity to critical velocity ratios. In addition, the upstream bend's effect on the downstream bend has been investigated. Results indicated that the maximum scour depth at the downstream bend has increased as a result of changing the mean velocity to critical velocity ratio from 0.8 to 0.84, 0.86, 0.89, 0.92, 0.95, and 0.98 by respectively 1.5, 2.5, 5, 10, 12, and 26 times. Moreover, increasing the ratio increased the maximum sedimentary height by 3, 10, 23, 48, 49, and 56 times. The upstream bend's incipient motion was observed for the mean velocity to critical velocity ratio of 0.89, while the downstream bend was equal to 0.78.

Background and Objective: Intimate relationships hold significant importance during emerging adulthood. This study aimed to investigate the critical determinants of perceived well-being in friendship relationships during emerging adulthood.Method: Using a quantitative approach, a sample of 726 undergraduate students from the Ferdowsi University of Mashhad were selected through convenience sampling. They completed the Interpersonal Behaviors Questionnaire (IBQ), the Compassionate and self-image goals scale (CSIGS), the Basic Need Satisfaction in Relationships Scale (BNS-RS), the Interpersonal Needs Questionnaire (INQ-10), Friendship Self-Regulation Questionnaire (SRQ-F), Interpersonal Behaviors Questionnaire-Self (IBQ-self), State Level Subjective Vitality Scale (SVS-SL), the Perceived Relationship Quality Component (PRQC), and the Basic Empathy Scale (BES). Data analysis was conducted using Partial Least Squares Structural Equation Modeling (PLS-SEM).Results: The results indicated that the critical determinants in predicting perceived well-being in friendship relationships were, in order, goals in friendship relationships, friendship self-regulation, perceived support of basic psychological needs by friends, satisfied basic psychological needs, frustrated psychological needs, and supporting the basic psychological needs of friends.Conclusion: The findings demonstrate that self-determination theory (SDT) provides a coherent framework for explaining perceived well-being in friendships.

Heart failure (HF) diagnosis, phenotyping, prognosis, and treatment decisions are all based on the left ventricular ejection fraction (EF). Heart failure with mid-range EF (HFmrEF) is a third EF category for heart failure with an EF between 40 and 49 percent. Comparatively, heart failure with preserved EF or reduced EF has been largely unexplored. 10–25% of patients with HF have HFmrEF. Although HFmrEF has an intermediate clinical profile, it is more similar to HF with reduced EF, particularly because these patients have a high incidence of ischaemic heart disease. Heart failure with preserved EF has a lower risk of cardiovascular events than heart failure with reduced EF, which is milder. HFmrEF and HF with preserved EF patients have a similar or higher risk of non-cardiovascular adverse events than patients with HF with reduced EF. There is still a great deal of mystery surrounding HFmrEF. The purpose of this review is to describe the major pathophysiology of HFmrEF and its similarities and differences with the other two types of EF. It is the purpose of this paper to present a comprehensive overview of the currently available evidence in support of the pathophysiology of patients with HFmrEF. Further investigation of the pathophysiology, treatment, and prognosis of this condition will be needed in the future in order to better understand it.

Hyperlipidemia is the fat particles excess in the serum. Hyperlipidemia increases the mortality rate that occurs with other metabolic disorders. Hyperlipidemia is classified into familial and acquired subgroups. Moreover, Hyperlipidemia etiology is based on environmental or genetic factors. For instance, abnormal HMG-CoA regulation down-regulates ubiquitin ligase and targets variable oxidative stress-related condition proteins. There has been proven reactive oxygen species (ROS) overshoot happens during hyperlipidemia occurrence. OS, directly and indirectly, regulates molecular cascades within the cell and leads to gene expression alteration. At this molecular juncture, AMPK is affected by ROS. AMPK is a serine-threonine kinase and a critical energy balance. Low energy conditions result in AMPK activation due to the down-regulation of protein and lipid synthesis. Furthermore, ER stress and activated unfolded protein proteasomal response and autophagy are AMPK mediated. Polyphenols are widespread dietary plant-based compounds that regulate gene expression and signal conduction. Through the hyperlipidemic state, FFAs releasing indirectly connect to AMPK/NF-κB pathway then polyphenols target them. AMPK, during this FFA exposure, down-regulates de novo lipid molecules generation. Likewise, if AMPK/mTOR pathway failure is prolonged, the hyperlipidemic state may be explicit, activated by natural herbal mediators, e.g., polyphenols. Polyphenols activate the AMPK signaling pathway and influence lipid metabolism. Polyphenol-mediated AMPK activation results in lipogenesis inhibition and lipophagy. Cholesterol efflux mediated polyphenols lipid-lowering effects, accessing LXR pathway. All these clues persist on direct or indirect AMPK-related polyphenolic anti-hyperlipidemic effects.

In this paper, the effect of preheating on the mechanical properties and micro structure of similar friction stir welded AA6061 aluminum alloys sheets was investigated. Aluminum alloy 6061 sheets with a thickness of 5 mm and threaded cylindrical pins were used. Rotation and traverse speeds were 1200 rpm and 75 mm/min, respectively. The results of tensile tests performed on the welded samples showed that compared to the non-preheated samples, preheating had increased the strength and elongation of the joints by 58% and 46%, respectively. In the present study, during the welding process preheating cause emerged heat with lower slope from stir zone. This phenomenon may result in Increase the deformation resistance of material and consequently decrease of grain size. This grain refinement can improve the mechanical properties of welds. Accordingly, hardness and strength of the material will be increased.

In the current study, the failure behavior of retrofitted steel structures was studied experimentally and theoretically with steel/CFRP double strap joints (DSJs) under quasi-static tensile loading. A series of DSJs with different bonding lengths are also considered and examined to experimentally assess the effective bond length. To predict the failure load values of the tested specimens, a new stress-based criterion, namely the point stress (PS) criterion is proposed. Although some theoretical predictive modelling for the strength between steel/CFRP joints under various loading conditions has been presented, in this work by using the new proposed approach, one can calculate rapidly and conveniently the failure loads of the steel/CFRP specimens. Furthermore, to assess the validity of the new proposed criterion, further experimental data on steel/CFRP DSJs available in the open literature are predicted using the PS criterion. Finally, it was found that a good agreement exists between the experimental results and the theoretical predictions based on the PS criterion.

This study presents the consecutive modification of orange peel (OP) by NaOH and sodium dodecyl sulfate (SDS) for simultaneous elimination of basic dyes from the binary system and modeling the adsorption process using an intelligent tool. The natural and modified biosorbents were characterized by variety of analyses such as: field emission scanning electron microscopy with energy dispersive X-ray, N2 physisorption and Fourier transform infrared spectroscopy techniques. The influence of various variables on dye removal like pH, the quantity of biosorbents, dyes concentration, contact time, and temperature in the binary system were investigated and optimized by an artificial neural network (ANN) model as an intelligent tool. The optimum quantity of the sorbent was found to be 0.30 g for orange peel (OP) and 0.25 g for NaOH-treated OP (NOP) and SDS-decorated NOP (SNOP) at pH = 7. The kinetics and thermodynamics investigations showed that the removal of dyes obeyed the pseudo-second-order kinetic model and were spontaneous and exothermic in nature. Moreover, in order to describe the mechanism of sorption process, desorption studies of dyes were carried out. The desorption percentages of methylene blue (MB) in water and HCl were found to be in the range of 1.93%–4.76% and 18.87%–28.76%, respectively; in addition, the desorption percentages of crystal violet (CV) in water and HCl were obtained to be in the range of 4.11%–7.41% and 32.84%–43.00%, respectively; which could be a recommendation ion exchange or electrostatic attachment of dyes onto biosorbents. The ANN predictions matched with the experimental data very well (0.95308 < R2 < 0.99191 and 0.98335 < R2 < 0.99773 for MB and CV, respectively) which indicated high accuracy of the ANN model. In addition, the relative importance of each parameter was calculated by Garson’s equation.

Today, due to recent developments in technology, children devote plenty of time for screen viewing. However, its harmful effects are not yet clear. The purpose of present study was to examine the associations among screen viewing and sleep duration, and body mass index (BMI) in under-five years old children. This cross-sectional study was conducted with 322 under-five healthy children that were selected using multistage stratified cluster sampling method in 2017. The data that were gathered by time-use diary method were analyzed using Kolmogorov-Smirnov test, Spearman correlation tests, multiple linear regression analysis, one-way ANCOVA, two-way ANCOVA. There was a negative correlation between screen time and sleep duration (rs = -0.42, p = 0.00), positive correlation between screen time and BMI (rs = 0.38, p = 0.00) and sleep duration negatively correlated with BMI (rs = -0.22, p = 0.00). screen viewing was a predictive factor for both sleep duration (β = -0.26, p = 0.00) and BMI (β = -0.26, p = 0.00). screen viewing had a significant impact on sleep duration (4, 314) = 5.02, P = 0.001) and BMI (F (4, 314) = 1.16, P=0.298). Results of this study indicated that screen viewing is related to sleep duration and BMI in under-five children. furthermore, screen time has an impact on sleep duration and BMI scores of children. findings of our study suggest that sleep duration negatively is associated with BMI in under-five-year-old children.

In this study, a novel task of printing speed optimization for continuous fiber composites is investigated. Using continuous fibers is an innovative approach to reinforce products made by fused filament fabrication (FFF) additive manufacturing (AM) technology. In the printing process of composites with continuous fibers, the printing speed is critical because of its significant effect on the geometric shape of the samples, especially their corners. During optimization in this research, continuous glass fiber (CGF) and polylactic acid (PLA) filaments were utilized as reinforcing phase and matrix, respectively, and were simultaneously fed into the extrusion-based polymer 3D printer to form PLA/CGF composites. The optimization was carried out by calculating the temperature changes of the deposited rasters in the presence and absence of fibers as a first step and then determining the special relationship between the printing speeds and rasters temperature changes. Finally, the optimal and the maximum printing speed was computed based on a hypothesis, which is proved by the results of high-quality printed composites with different geometric shapes.

One of the most common and important destructive attacks on the victim system is Advanced Persistent Threats (APT)-attack. The APT attacker can achieve his hostile goals by obtaining information and gaining financial benefits regarding the infrastructure of a network. One of the solutions to detect a secret APT attack is using network traffic. Due to the nature of the APT attack in terms of being on the network for a long time and the fact that the network may crash because of high traffic, it is difficult to detect this type of attack. Hence, in this study, machine learning methods such as C5.0 decision tree, Bayesian network and deep neural network are used for timely detection and classification of APT-attacks on the NSL-KDD data set. Moreover, 10-fold cross validation method is used to experiment these models. As a result, the accuracy (ACC) of the C5.0 decision tree, Bayesian network and 6-layer deep learning models is obtained as 95.64%, 88.37% and 98.85%, respectively, and also, in terms of the important criterion of the false positive rate (FPR), the FPR value for the C5.0 decision tree, Bayesian network and 6-layer deep learning models is obtained as 2.56, 10.47 and 1.13, respectively. Other criterions such as sensitivity, specificity, accuracy, false negative rate and F-measure are also investigated for the models, and the experimental results show that the deep learning model with automatic multi-layered extraction of features has the best performance for timely detection of an APT-attack comparing to other classification models.

Dementia, characterized by cognitive decline beyond age-related expectations, poses a formidable global health challenge. With an estimated 55 million individuals affected worldwide and 10 million new cases annually, dementia profoundly impacts memory, comprehension, language, and behavior. Then, the global diabetes population increased from 108 million in 1980 to 422 million in 2014, with a more rapid rise in prevalence observed in low- and middle-income countries compared to high-income countries. Individuals with diabetes have an increased risk of cognitive problems, including a higher likelihood of developing dementia, Alzheimer's disease, and vascular dementia, especially in older age. Managing diabetes through diet, physical activity, medication, and consistent screening and treatment for complications can prevent or delay its consequences.Globally ranking as the seventh leading cause of death, dementia's societal implications are substantial. The chapter delves into Mild Cognitive Impairment (MCI), a precursor to dementia, emphasizing its global epidemiological trends. Neuroimaging, particularly Functional Near-Infrared Spectroscopy (fNIRS), emerges as a non-invasive diagnostic tool, surpassing traditional imaging methods' portability. The chapter investigates the effects of non-invasive electrical stimulation on neurovascular tissues, shedding light on its impact including potential to address metaboreflex related reduced exercise tolerance. Furthermore, the chapter presents a clinical trial (ClinicalTrials.gov NCT04626453 and NCT04812288) examining the effects of a 2-month exercise program on cognitive function and muscular oxidative capacity in older adults with type 2 diabetes. The study's design, individualized exercise regimens to address muscle mechanoreflex and metaboreflex responses, and their physiological changes during exercise are discussed, offering insights into the interplay between exercise tolerance, cognition, and vascular health. The findings contribute to tailored and effective interventions for cognitive well-being. Here, our exploration extends to the application of transcranial electrical stimulation (tES) in optimizing exercise performance, with a focus on its various forms, including transcranial direct current stimulation (tDCS) and transcranial alternating current stimulation (tACS). A physiological modeling approach based on the neurovascular unit (NVU) is employed, revealing potential avenues for also treating vascular dementia (often noted to have a strong association with type 2 diabetes) through tACS, guided by human-in-the-loop approaches. Here, modal analysis for control is applied to assess the NVU model's characteristic dynamics under tACS, providing a comprehensive understanding of neurovascular coupling modes.In summary, this chapter synthesizes diverse facets in type 2 diabetes comorbidity and cognitive decline, ranging from global impact and diagnostic criteria to innovative interventions like exercise and transcranial electrical stimulation. The multidisciplinary approach integrates epidemiology, clinical trials, and physiological modeling, contributing valuable insights into the holistic management of cognitive health and neurovascular function.

Soil quality assessment based on crop yields and identification of key indicators of it can be used for better management of agricultural production. In the current research, the weighted additive soil quality index (SQIw), factor analysis (FA) and multiple linear regression (MLR) method are used to assess the soil quality of rainfed winter wheat fields with two soil orders on 53.20 km2 of agricultural land in western Iran. A total of 18 soil quality indicators were determined for 100 soil samples (0-20 cm depth) from two soil orders (Inceptisols and Entisols). The soil properties measured were: pH, soil texture, organic carbon (OC), cation exchange capacity (CEC), electrical conductivity (EC), soil microbial respiration (SMR), carbonate calcium equivalent (CCE), soil porosity (SP), bulk density (BD), exchangeable sodium percentage (ESP), mean weight diameter (MWD), available potassium (AK), total nitrogen (TN), available phosphorus (AP), available Fe (AFe), available Zn (AZn), available Mn (AMn), and available Cu (ACu). Mean wheat grain yield for the two years for all of the 100 sampling sites was also gathered. The SQIw was calculated using two weighting methods (FA and MLR) and maps were created using a digital soil mapping framework. The soil indicators taken in the minimum data set (MDS) were AK, clay, CEC, AP, SMR, and sand. The correlation between the MLR weighting technique (SQI-M) and the rainfed wheat yield (r=0.62) was slightly larger than that the correlation of yield with the FA weighted technique (SQI-F) (r=0.58). Results showed that the means of both SQI-M and SQI-F and rainfed wheat yield for Inceptisols were higher than for Entisols although these differences were not statistically significant. Both SQI-M and SQI-F showed that areas with Entisols had lower proportions of good soil quality grades (Grade I and II), and higher proportions of poor soil quality grades (Grade IV and V) compared to Inceptisols. Based on these results, soil type must be considered for soil quality assessment in future studies to maintain and enhance soil quality and sustainable production. The overall soil quality of the study region was of poor and moderate grades. To improve soil quality, it is therefore recommended that effective practices such as the implementation of scientific integrated nutrient management involving the combined use of organic and inorganic fertilizers in rainfed wheat fields be promoted.

Appropriate estimation of soil settlement is of significant importance since it directly influences the performance of building and infrastructures that are built on soil. In particular, the settlement of fine-grained soils is critical because of low permeability and continuous settlement with time. Coefficient of consolidation (Cc) is a key parameter to estimate settlement of fine-grained soil layers. However, estimation of this parameter is time consuming, needs skilled technicians, and specific equipment. In this study, Cc was estimated using several soil parameters such as liquid limit (LL), plastic limit (PL), and initial void ratio (e0). Estimating such parameters in laboratory is straight forward and needs substantially less time and cost compared to conventional tests to estimate Cc such as Oedometer test. This study presents a novel prediction model for Cc of fine-grained soils using gene-expression programming (GEP). GEP is a biologically inspired technique capable of offering closed-form solution for the optimal solution. A database consisted of 108 different data points was used to develop the model. A closed-form equation solution was derived to estimate Cc based on LL, PL, and e0. The performance of developed GEP-based model was evaluated through coefficient of determination (R2), root mean squared error (RMSE), and mean average error (MAE). High R2 and low error values indicated the descent performance of the model. Furthermore, the model was evaluated using the additional performance measures and met all the suggested criteria. Furthermore, the model had a better performance in terms of R2, RMSE, and MAE compared to most of existing models. It is expected that the developed model will decrease the time and cost associate with determining Cc of fine-grained soils.

Beta thalassemia major (β-TM) disorder characterized by the lack, or severe reduction in the production of hemoglobin β-globin chains. The standard protocol for the management of β-TM is blood transfusion and iron chelation therapy to reduce the iron overload state. The present study aimed to investigate the relationships between two iron regulatory hormones, hepcidin (HEPC) and erythroferrone (ERFE) levels and iron status parameters (ISPs) in Iraqi patients with β-TM. ISPs and hormones were measured in sixty patients and compared with thirty healthy controls. The results indicated significant changes in different iron status parameters, while ferritin (FRT) with the ~11 fold increase showed the most change. Significant reduction in HEPC and increase in ERFE levels were detected in patients as compared to the control group, while no direct correlation was identified with the other measured ISPs. Receiver operating characteristic (ROC) analysis showed that the z-score of the composite of ERFE+FRT has a full diagnostic ability for β-TM. In conclusion, our finding indicated the correlation between different ISPs, FRT as the leading predictor of iron overload and tow main iron regulatory hormones.

The relationship between physics and information processing is a topic of great significance in the realm of science and technology. The laws of physics, which govern the behavior of matter and energy, also have a profound influence on the way information is processed and utilized. While the mathematics governing information processing has not extensively utilized the laws of physics, it is evident that there is potential for these laws to play a more significant role, particularly in the context of quantum systems. based on the equivalence between information and energy, we can explore how other laws of physics can effectively contribute to more efficient and advanced information processing techniques. This research sheds light on the interconnectedness of physics and information processing, and its findings have the potential to significantly enhance our ability to process information, particularly in cutting-edge quantum systems. By recognizing and leveraging the influence of physics, we can pave the way for further advancements in information processing technologies.

Hand gesture recognition has many valuable applications in engineering and health care. This study proposes a novel model which can accurately distinguish hand gestures using forearm muscles' surface electromyogram (sEMG) signals. A deep learning algorithm with hyper parameters impacting the final model’s accuracy and a convolutional neural network (CNN) were employed in the recognition stage. The number of convolutional layers, kernels per layer, and neurons in the dense layer were selected for optimization, while the remaining parameters, such as the learning rate, batch size, and number of epochs, were chosen based on trial and error and prior knowledge. The optimal values for the selected hyperparameters were obtained using a genetic algorithm to achieve maximum recognition accuracy. The UC2018 Dual-Myo database was used for training and testing the model based on EMG signals characterizing the activity of eight different hand gestures. The final structure of the model consisted of two convolutional layers with 131 and 28 kernels, a dense layer with 111 neurons, and a softmax layer with eight neurons. Upon optimizing the hyperparameters using the genetic algorithm, the accuracy of the proposed model increased from 91.86% to 96.4% at best and 95.3% on average in real-time applications and 99.6% in an offline mode. Future work is warranted towards improving the architecture and the computational cost.

This paper proposes a game-theoretic framework for quantifying effects of strategic bidding behavior of load aggregators (LAs) on wholesale electricity market equilibrium. The independent system operator (ISO) employs double-sided auction design to settle transactions in the wholesale electricity market. Generating companies (GENCOs) and LAs submit their bids to the ISO in the economic model of supply function equilibrium. Under the smart grid paradigm, a LA participates in the electricity market on behalf of end-consumers to minimize their total payment for purchasing electricity. In this paper, bi-level programming (BLP) method is employed to determine optimal bidding strategy of self-interested market participants. In the upper level, the profit of intended market participant is maximized and in the lower level, the ISO clears the market via a bid-based security constrained economic dispatch (SCED). Also, competition of GENCOs and LAs is modeled as a non-cooperative game. To examine the effects of strategic bidding behavior of LAs on market equilibrium, the proposed model is applied to the IEEE 9-bus and the IEEE 30-bus test systems. According to numerical results, to allow the LAs to behave strategically along with the GENCOs makes the former better off and the latter worse off, while the net effect of this on total social welfare turns out to be case-contingent.

Polyethyleneimine (PEI) has been reported to have good potential for the adsorption of metal ions. In this work, PEI was covalently bound to NiFe2O4@SiO2 nanoparticles to form the new adsorbent NiFe2O4@SiO2–PEI. The material allowed magnetic separation and was characterized via powder X-ray diffraction (PXRD), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), Fourier-transform IR spectroscopy (FT-IR), and thermogravimetry-differential thermal analysis (TGA-DTA). The adsorption of CrO42‒, Ni2+, and Pb2+ ions from aqueous solutions was studied at different pH, temperatures, metal ion concentration, and adsorbent dosage. Maximum adsorption capacities of 149.23, 156.68, and 161.25 mg/g were obtained for CrO42‒, Ni2+, and Pb2+, respectively under optimum conditions using 0.075 g of the adsorbent material 250 mg/L ion concentration, at pH = 6.5 and room temperature.

This review examines additive manufacturing for refractory tungsten (W) and its alloys. It emphasizes the primary challenges and determining factors involved in additive manufacturing pure W, W alloys, and composites. Our focus in this regard extends to both process and alloying strategies designed to address critical issues such as densification, micro-cracking, and mechanical properties in tungsten-based components produced through additive techniques. Throughout the review, we organize existing knowledge and insights into convenient tables, serving as valuable resources for researchers embarking on a deeper exploration of these topics.

SARS-CoV-2 was detected in China in December 2019. Myocardial injury is a crucial presentation of COVID-19, based on the association of ACE-2 and SARS-CoV-2. Down-regulating ACE-2 decreases the cardioprotective effects of angiotensin, leading to a higher TNF-α activation. TNF-α causes the inflammatory response in the myocardial damage as an apoptotic inducer. Moreover, as an inducer of necroptosis, TNF-α binds to a part of TNF receptor 1, which involves receptor-interacting protein 1 (RIP1) and causes cell death through RIP1 inhibition and NF-κB stimulation, which are also done through Tpl-2. Calcineurin controls the Tpl-2-driven NFAT stimulation. Bcl-2 or Bcl-X_L entirely blocks these pathways. Bcl-2 overexpression reduces FasL expression with a mechanism based on Bcl-2 inhibiting the NFAT. Moreover, the Fas/FasL system activates apoptosis in various cells. Bcl-XL stimulates Fas-related cell death. Additionally, TNF-α, as a part of inflammatory cytokine storms, indirectly interacts with NFAT/Bcl-2 through Tpl-2/NF-κB. Diversely, TNF-α and IL-1ẞ, the basis of inflammatory cytokine storms in COVID-19, can stimulate generating NO. Also, IL-2 is highly up-regulated in COVID-19 patients and stimulates NO generation in patients. TNF-α can provoke the generation of superoxides in neutrophils. A well-determined mechanism is the intracellular production of NO via calcium-calmodulin-dependent NO synthase (NOS). NO enhances NFAT’s calcium-dependent activity. Also, Intra/extracellular calcium exchange activates calcineurin and its related molecule, NFAT. Nitration provokes RIP1 necroptosis cascade, with respiratory complex I. Nitrites converse protection against ischemia-reperfusion injuries in the myocardium. Regulating this intrinsic molecular pathway can prevent the necroptosis of cardiomyocytes.

Energy harvesting from wind turbines has been explored by researchers for more than a century from conventional turbines up to the latest bladeless turbines. Amongst these bladeless turbines, vortex bladeless wind turbine (VBT) harvests energy from oscillation of a turbine body. Due to the novelty of this science and the widespread researches around the world, one of the most important issues is to optimize and predict produced power. To enhance the produced output electrical power of VBT, the fluid-solid interactions (FSI) were analyzed to collect a dataset for predicting procedure. Long short-term memory (LSTM) method has been used to predict the produced power of VBT from the collected data. The reason of choosing LSTM from various artificial neural network methods is that the parameters of VBT study are all time- dependent and the LSTM is one of the most accruable algorithms for predicting time series data. In order to find the relationship between the parameter and the variables used in this research, a correlation matrix was presented. According to the value of 0.3 for the root mean square error (RMSE), a comparative analysis between the simulation results and its prediction shows that the LSTM method is very accurate for these types of research. Furthermore, the LSTM method has significantly reduced the computation time so that the prediction time of desired values has been reduced from an average of 2 and a half hours to two minutes. Also, one of the most important achievements of this study is to suggest a mathematical relation of VBT output power which helps to extend it in a different size of VBT with a high range of parameter variations.

Accurate forecasts of ocean waves energy can not only reduce costs for investment but it is also essential for management and operation of electrical power. This paper presents an innovative approach based on the Long Short Term Memory (LSTM) to predict the power generation of an economical wave energy converter named “Searaser”. The data for analyzing is provided by collecting the experimental data from another study and the exerted data from numerical simulation of searaser. The simulation is done with Flow-3D software which has high capability in analyzing the fluid solid interactions. The lack of relation between wind speed and output power in previous studies needs to be investigated in this field. Therefore, in this study the wind speed and output power are related with a LSTM method. Moreover, it can be inferred that the LSTM Network is able to predict power in terms of height more accurately and faster than the numerical solution in a field of predicting. The network output figures show a great agreement and the root mean square is 0.49 in the mean value related to the accuracy of LSTM method. Furthermore, the mathematical relation between the generated power and wave height was introduced by curve fitting of the power function to the result of LSTM method.

Nanoparticles (NPs) are widely used in diverse disciplines, including biology, medicine science. The central question that need to be answered is whether NPs have toxic effects on biological cells and molecules or are they safe. The safety of NPs including targeted drug delivery is critical and so is their toxicity in the environment. In recent years, in vitro and in vivo research on animals has generated abundant information about the toxicity of NPs. However, due to varying laboratory conditions, the comparison of the results from ensuing studies is somewhat unreliable. It should be noted that, depending on the type of production, NPs can enter the body through inhalation, skin and via digestive routes. Due to the diversity of NPs and their properties, there is paucity of accurate information on their toxicological effects; particle size, shape, surface area and the chemical levels are considered as key factors in creating health and toxicological effects. Consequently, there is a need for reliable information about their effects on various organs so as to deal with NPs effectively and their impact on health and the environment. This review covers the existing knowledge base on the subject that hopefully prepares us better to address these challenges.

Imperfection sensitivity of large amplitude vibration of curved single-walled carbon nanotubes (SWCNTs) is considered in this study. The SWCNT is modeled as a Timoshenko nano-beam and its curved shape is included as an initial geometric imperfection term in the displacement field. Geometric nonlinearities of von Kármán type and nonlocal elasticity theory of Eringen are employed to derive governing equations of motion of nano-beam. Spatial discretization of governing equations and associated boundary conditions is performed using differential quadrature (DQ) method and the corresponding nonlinear eigenvalue problem is iteratively solved. Effects of value and location of the geometric imperfection, and the nonlocal small-scale parameter on the nonlinear frequency ratio and imperfection sensitivity of a curved SWCNT for various boundary conditions are investigated. The results show that the geometric imperfection plays a significant role in the nonlinear vibration characteristics of curved SWCNTs.

A Savonius wind turbine is one of the simplest vertical-axis turbines. Several researchers have been attracted to it because of its simple structure, low noise, appropriate torque, and independence from wind direction. SR3345 and SR5050 blade profiles will be investigated for their effects on the performance of Savonius wind turbines. First, the fabricated wind turbine is placed in front of an open circuit wind tunnel with a velocity of 6 m/s. Furthermore, governing relationships are used to calculate power and torque coefficients as well as tip speed. In this study, the power and torque coefficients of the turbine are compared with the two profiles considered based on overlap ratios between 0 and 0.3. Despite its increased stability, the central shaft reduced the power coefficient of the turbine. For blade SR3345, the best performance occurs at tip speed ratios of less than 1, while for blade SR5050, the best performance occurs at higher tip speed ratios. Both blades SR3345 and SR5050 achieve the highest power coefficients at overlap ratios of 0 and 0.18 when a central shaft is present.

The energy crisis is currently a major topic in scientific and managerial discussions in the building and construction industry. While employing low-cost strategies for reducing energy usage is beneficial for principals and decision-makers, the primary purpose of this study is to recommend the use of phase change materials (PCM) to improve cooling and heating load management in buildings. In order to accomplish this, the study applies design-builder simulations to a developing country case study. The results indicate that integrating PCM in buildings can reduce energy usage by around 6 percent. Although this value may be lower than other techniques, it is nevertheless important for reaching green building goals in both developed and developing nations. The case study, which takes place in a four-season region, demonstrates the significant potential of the PCM system for both cooling and heating energy management. In addition, the reciprocal performance improvement of PCMs is a remarkable characteristic, especially when contrasted to some conventional systems that focus on a single energy management objective in buildings. Lastly, it should be underlined that the suggested platform is consistent with Sustainable Development Goal 7 (Affordable and Clean Energy Targets).

Human activities and natural events alter the earth’s surface and pose a constant threat to the environment. Thus, accurately monitoring and predicting these changes in a timely manner is crucial to provide solutions and mitigate the environmental consequences beforehand. This research introduces a novel framework, called HCD-Net, for change detection using bi-temporal hyperspectral images. The framework is based on double-stream deep feature extraction and an attention mechanism. The first stream focuses on deep feature extraction through 3D convolution layers and 3D Squeeze-and-Excitation (SE) blocks. The second stream focuses on deep feature extraction through 2D convolution and 2D SE blocks. The extracted deep features are then concatenated and fed to dense layers for decision-making. The efficiency of HCD-Net is compared to the state-of-the-art change detection methods. Additionally, the bi-temporal Airborne Visible InfraRed Imaging Spectrometer (AVIRIS) hyperspectral dataset was used for further evaluation of the change detection results. The results show that HCD-Net has a higher accuracy and the lowest false alarm rate, where the overall classification accuracy is above 96%, and the kappa coefficient is over 0.9.

Densimetric Froude (Fr) is the minimum velocity required to prevent sediment deposition in pipes. Prediction of Fr is of utmost importance in numerous applications in civil engineering. In this paper through using a new hybrid method. Genetic Algorithm (GA) is used for optimum selection of membership functions of Adaptive Neuro-Fuzzy Inference System (ANFIS), and Singular Value Decomposition (SVD) method is used to compute the linear parameters of ANFIS’s results section (ANFIS-GA/SVD). Also, two different target functions are known as training error (TE) and prediction error (PE) by Pareto curve, the trade-off between these functions is selected as the optimal modeling point. First, different models will be presented using the parameters affecting Fr prediction, classifying them in different groups; then the Fr parameter will be predicted for all the different models through utilizing three different sets of data and the ANFIS-GA/SVD technique. The results of the models indicate that the best Fr prediction is obtained when independent parameters such as volumetric sediment concentration (CV), ratio of median diameter of particle size to pipe diameter (d/D), ratio of median diameter of particle size to hydraulic radius (d/R) and overall friction factor of sediment (λs) use as input variables in prediction of Fr. A sensitivity analysis is also conducted for the purpose of examining the effect of each of the dimensionless parameters on Fr prediction accuracy. Comparing the results of the suggested models with the existing regression-based equations shows that ANFIS-GA/SVD (R²=0.986, MAPE=4.397, RMSE=0.206, SI=0.053, ρ=0.026, BIAS=-0.025) is more accurate than the rest of the models.

This paper directly addresses a long-standing issue that affects the development of many complex distributed software systems: how to establish quickly, cheaply, and reliably whether they can deliver their intended performance before expending significant time, effort and money on detailed design and implementation. We describe ∆QSD, a novel metrics-based and quality-centric paradigm that uses formalised outcome diagrams to explore the performance consequences of design decisions, as a performance blueprint of the system. The distinctive feature of outcome diagrams is that they capture the essential observational properties of the system, independent of the details of system structure and behaviour. The ∆QSD paradigm derives bounds on performance expressed as probability distributions encompassing all possible executions of the system. The ∆QSD paradigm is both effective and generic: it allows values from various sources to be combined in a rigorous way, so that approximate results can be obtained quickly and subsequently refined. ∆QSD has been successfully used by Predictable Network Solutions for consultancy on large-scale applications in a number of industries, including telecommunications, avionics, and space and defence, resulting in cumulative savings worth billions of US dollars. The paper outlines the ∆QSD paradigm, describes its formal underpinnings, and illustrates its use via a topical real-world example taken from the blockchain/cryptocurrency domain. ∆QSD has enabled challenging throughput targets to be met for a globally distributed blockchain operating on the public internet.

Considering the significant advancements in autonomous vehicle technology, research in this field is of interest to researchers. To drive vehicles autonomously, controlling steer angle, gas hatch, and brakes need to be learned. The behavioral cloning method is used to imitate humans’ driving behavior. We created a dataset of driving in different routes and conditions and using the designed model, the output used for controlling the vehicle is obtained. In this paper, the Learning of Self-driving Vehicles Based on Real Driving Behavior Using Deep Neural Network Techniques (LSV-DNN) is proposed. We designed a convolutional network which uses the real driving data obtained through the vehicle’s camera and computer. The response of the driver is during driving is recorded in different situations and by converting the real driver’s driving video to images and transferring the data to an excel file, obstacle detection is carried out with the best accuracy and speed using the Yolo algorithm version 3. This way, the network learns the response of the driver to obstacles in different locations and the network is trained with the Yolo algorithm version 3 and the output of obstacle detection. Then, it outputs the steer angle and amount of brake, gas, and vehicle acceleration. The LSV-DNN is evaluated here via extensive simulations carried out in Python and TensorFlow environment. We evaluated the network error using the loss function. By comparing other methods which were conducted on the simulator’s data, we obtained good performance results for the designed network on the data from KITTI benchmark, the data collected using a private vehicle, and the data we collected.

Thanks to rapid advances in the Internet of Things (IoT) and Edge-Fog-Cloud Computing technologies, Smart Public Safety (SPS) system has become feasible by integrating heterogeneous computing devices and different types of networks to collaboratively provide seamless public safety services. While SPS facilitates convenient exchanges of surveillance data streams among device owners and third-party applications, the existing monolithic service oriented architecture (SOA) architecture is unable to provide scalable and extensible services in a large-scale heterogeneous network environment. Moreover, traditional security solutions rely on centralized trusted third-party authority, which not only can be a performance bottleneck or the single point of failure, but it also incurs privacy concerns on improperly use of private information. Inspired by blockchain and microservices technologies, this paper proposed a BLockchain-ENabled Decentralized Smart Public Safety (BlendSPS) system. Leveraging hybrid blockchain fabrics, a microservices based security mechanism is implemented to enable decentralized security architecture, and it supports immutability, auditability and traceability for secured data sharing and operations among participants of the SPS system. An extensive experimental study verified the feasibility of the proposed Blend-SPS that possesses security and privacy proprieties with limited overhead on IoT based edge networks.

The Doubly-Fed Induction Generator (DFIG) has significant features in comparison with Fixed Speed Wind Turbine (FSWT), which has popularized its application in power system. Due to partial rated back-to-back converters in the DFIG, Fault Ride-Through (FRT) capability improvement is one of the great subjects regarding new grid code requirements. To enhance the FRT capability of the DFIG, many studies have been carried out. Fault current limiting devices as one of the techniques are utilized to limit the current level and protect switches of the back-to-back converter from over-current damage. In this paper, a review is done based on fault current limiting characteristic of the proposed fault current limiting devices Therefore, Fault Current Limiters (FCLs) and Series Dynamic Braking Resistors (SDBRs) are mainly taken into account. Operation of all configurations including their advantages and disadvantages is explained. Impedance type and the fault current limiting devices’ location are two important factors, which significantly affect the DFIG behaviour in the fault condition. These two factors are basically studied by the simulation and their effects on the key parameters of the DFIG are investigated. Finally, future works in respect to the FCL application in the FRT improvement of the DFIG have also been discussed.

Cancer have been known as a most important global mortality reason, which in spite of novel therapeutic ways, the leading death is still considerable. Molecular targeted diagnosis and therapy using aptamers with high affinity have converted to a popular technique for pathological angiogenesis and cancer therapy scientists. In this paper several aptamer-based diagnostic and therapeutic techniques such as aptamer-nanomaterial conjugation, aptamer-drug conjugation (physically or covalently) and biosensors, which successfully designed for biomarkers, are critically reviewed. The results obviously demonstrated that aptamer have potentially incorporated with targeted delivery systems and biosensors for detection of biomarkers which expressed by cancer cells. Aptamer-based therapeutic and diagnostic methods, as the main field of medical sciences, possess high potential in cancer therapy, pathological angiogenesis and increase of community health. The clinical use of aptamer is so limited due to unreliability resulted from targets impurities, inaccuracy in SELEX stages process, and in vitro synthesis which led to the lower selectivity for in vivo targets. Moreover, size behavior, probable toxicity, low-distribution and unpredictable behavior of nanomaterials in in vivo media make critical their usage in clinical assays. This review can be helpful for implementation and designing the future studies which are effective and applicable for clinical use.

Background: Targeting Hepatitis B virus (HBV) infection in human is crucial due to its adverse. Herbal medicine has long been significant in this regard, with flavonoids demonstrating promising results. Hence, establishing a way of identifying flavonoids with anti-HBV activities is the aim of the present study. Methods: Flavonoid structures with anti-HBV activities were retrieved. A flavonol-based pharmacophore model was established using LigandScout v4.4. Screening was performed using the PharmIt server. A QSAR equation was developed and validated with independent sets of compounds. Applicability domain (AD) was defined using Euclidean distance calculations for model validation. Results: The best model, consisting of 57 features was generated. HTS using the flavonol-based model resulted in 509 unique hits. The model's sensitivity and specificity were 71% and 100%, respectively. The QSAR model with two predictors, x4a and qed, exhibited strong predictive performance with an adjusted-R² value of 0.85 and 0.90 of Q2. Conclusion: The QSAR model has been validated with two separate chemical sets, guaranteeing the model's reproducibility and usefulness for other flavonols by utilizing the predictive characteristics of X4A and qed. These results provide new possibilities for discovering future anti-HBV drugs by integrating modeling and experimental research.

Although different assessments and evaluations of Dual-Miller cycle performed, specified output power and thermal performance associated with engine determined. Besides, multi objective optimization of thermal efficiency, Ecological Coefficient of performance ( ) and Ecological function ( ) by the mean of NSGA-II technique and thermodynamic analysis performed. The Pareto optimal frontier obtaining the best optimum solution is chosen by fuzzy Bellman-Zadeh, LINMAP, and TOPSIS decision-making techniques. Based on the results, performances of dual-Miller cycles and their optimization are improved.

Olfactory system is a vital sensory system in mammals, giving them the ability to connect with their environment. Anosmia, or the complete loss of olfaction ability, which could be caused by injuries, is an interesting topic for inspectors with the aim of diagnosing patients. Sniffing test is currently utilized to examine if an individual is suffering from anosmia; however, functional Magnetic Resonance Imaging (fMRI) provides unique information about the structure and function of the different areas of the human brain, and therefore this noninvasive method could be used as a tool to locate the olfactory-related regions of the brain. In this study, by recruiting 31 healthy and anosmic individuals, we investigated the neural BOLD responses in the olfactory cortices following two odor stimuli, rose and eucalyptus, by using a 3T MR scanner. Comparing the two groups, we observed a network of brain areas being more active in the normal individuals when smelling the odors. In addition, a number of brain areas also showed an activation decline during the odor stimuli, which is hypothesized as a resource allocation deactivation. This study illustrated alterations in the brain activity between the normal individuals and anosmic patients when smelling odors, and could potentially help for a better anosmia diagnosis in the future.

Abstract: Lipidic carriers employed for the entrapment, encapsulation and precise targeting the bioactive compounds offer significant advantages to the biomedical, pharmaceutical, nutraceutical and cosmeceutical industries. These lipid and phospholipid-based vesicles can improve the solubility, permeation, pharmacokinetics, pharmacodynamics and bioavailability of the encapsulated material. As a matter of fact, nano-sized phospholipid vesicles have attained the highest success rate in commercialization among the available drug encapsulation technologies. Nevertheless, developing industrially acceptable products still remains a challenge. Among the main disadvantages of conventional lipidic carriers are their instability in the biological environments, and their sensitivity to changes in the pH, temperature and enzymes. To overcome these problems, the new generation of phospho/lipid-based carrier systems was developed using ingredients from microorganisms living in extremely harsh environments (i.e., archeaeobacteria). The present entry aims to review unique features of archaeolipids and recent developments in their application for the encapsulation of genetic material as well as their role and function as adjuvants and vaccine candidates.

Introduction Hydroxychloroquine (HCQ) is an antimalarial agent that has been tried out in the treatment of COVID-19, however, evidence of efficacy remains limited. Although Hydroxychloroquine overdose is not common, growing cases of poisoning with HCQ have been reported during recent years. HCQ toxicity is characterized by life-threatening symptoms which require immediate medical intervention. This report presents a suicide attempt in a hyperglycemic patient, massive ingestion of HCQ manifested by hypokalemia and acidosis.Case summaryA 47-year-old man presented at the hospital hours after massive ingestion of HCQ (100 tablets), with generalized weakness and dizziness which had led to a fall. He was drowsy and had experienced episodes of nausea/vomiting. His past medical history was remarkable for uncontrolled diabetes mellitus, confirmed by the blood glucose of 345 mg/dL, and a previous history of hospitalization a few months ago, due to a suicide attempt. He developed marked hypokalemia accompanied by acidosis, plasma potassium of 2.8 mmol/L and pH 7.34, and hypotension, blood pressure of 80/51 mm Hg, but survived with close cardiac monitoring and immediate intervention including aggressive potassium replacement, bicarbonate infusion, and charcoal administration. ConclusionConsidering the significantly increased off-label use of HCQ during the COVID-19 pandemic, this report alerts the potential for HCQ to be associated with severe electrolyte disorders, especially in predisposing conditions like diabetes. Clinicians should keep in mind the possibility of hypoglycemia in diabetic patients under hypoglycemic medications and concurrent use of chloroquine/HCQ. This therapeutic approach also suggests the benefit of even a delayed activated charcoal administration in the treatment of HCQ poisoning.

In this study, an optimized multi-material system was designed and developed to print samples in various applications, including biomedical fields (e.g., mandibular bone loss). To improve the mechanical and biological properties of scaffolds utilized for dental bone loss applications, a multi-material setup was devised, which employs digital light processing technology. This setup consists of a linear system comprising two resin vats and one ultrasonic cleaning tank, enabling the integration of diverse materials and structures to optimize the composition of the scaffold. This approach was used to print multi-material PLLA scaffolds containing 20 wt.%. HA on the interior side, and PLLA containing 1 wt.% GO on the exterior surface of the scaffold, which were evaluated mechanically and biologically after printing. The scaffold was designed using a triply periodic minimal surface (TPMS) lattice structure, which is known to possess favorable mechanical and biological properties. Various multi-material samples were successfully printed and evaluated to illustrate the multiple-material setup's potential for ensuring proper function, cleaning, and adequate interface bonding. By numerically evaluating several TMPS structures, a novel Gyroid TPMS scaffold with a nominal porosity of 50% was developed and validated experimentally. The biological properties of the scaffolds were also evaluated, including surface morphology, (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) MTT assay, and cell adhesion. Based on the results, multi-material components with the least contaminations with suitable mechanical and biological properties were successfully printed. By combining PLLA-HA and PLLA-GO, this innovative technique holds tremendous potential for enhancing the effectiveness of regenerative procedures in the field of dentistry.