In recent years, excessive heat in the urban texture has become the main problem in the humid and calm wind city of Babolsar with high density, especially in high-rise areas. Therefore, in order to create comfort in this region, it is necessary to establish and continue the wind circulation in space with an environmentally compatible and optimal configuration. The study applies combination of literature, field measurement, experimental validation of CFD simulation output, and comparative analysis. After field measurement and validation of FLOW-3D simulation software (V11.2.2), the relationship between these parameters (height, the width of passages, enclosure between buildings, and buildings' orientation) will be studied which affects the wind’s velocity and direction. The factors of the buildings' orientation and enclosure based on the passages' width have opposite reactions in the direction of the prevailing wind especially from perpendicular side. In this study, two effective factors are on wind velocity: 1- The orientation of the buildings towards the wind flow by creating permeability 2- Reducing the enclosure by increasing the width of the passage's perpendicular to the wind flow (w '= 3w, E' = 0.33E). According to the theoretical and practical study, first, the creation of permeability in the body of the block and the separation of buildings instead of aggregation has been studied, and then reducing the confinement of streets perpendicular to the wind flow has been discussed as effective solutions to improve the wind velocity and circulation between the urban environment.

Various natural disasters such as floods, fires, earthquakes, etc. have affected human life. Detection and classification of large and small earthquakes caused by natural or abnormal events have been always important to Earth scientist. One of the most important research challenges in this field is the lack of an effective method for identifying and categorizing various types of seismic events at less important and important levels. Based on latest achievements of Data Mining international institutions such as Rexer-KDnugget-Gartner and also newest authentic articles, SVM, KNN, C4.5, MLP are from most important and popular and leading classifiers in data world.Therefor in present study, a boost learning system consisting support vector machine algorithms with linear regression, MLP Neural Network ، C4.5 decision tree and KNN near neighborhood have been utilized in a combined form to detect and categorize micro seismic events. In general, the steps involved in the proposed method are: 1) performing artificial seismic tests, 2) data gathering and analysis, 3) conducting preprocessing and separating training and testing samples, 4) generating relevant models with training samples and detecting and categorizing test samples and 5) extracting a cluster with the maximum candidate using boost learning. After simulations, it was observed that the accuracy of proposed boost method to the best answer was about 6.1% higher compare to other methods and the error rate was 0.082% of recalling. Accuracy of detection and classification to the best answer were also improved compare to other methods up to 2.31% and 6.34%, respectively.

In this paper, a fuzzy logic-based energy management system and multi-port quasi-z-source converter are proposed that utilizes hybrid renewable energy sources. The system ensures that each energy source module can be used individually by employing fuzzy logic to define power modes. This approach also helps prevent switching losses resulting from extra switching of the source modules. Also, the proposed energy management does not have a mathematical model, so applicability is simple and it is suitable for different multiple input topologies. The Mamdani fuzzy inference system can be designed to capture the nonlinear behavior of the system because of the linguistic rules. Moreover, by adopting the quasi-z-source network to the end of the multi-port converter, the switching losses of the multi-port modules have been significantly reduced. The simulation results are obtained using MATLAB Simulink, and the experimental results are obtained by connecting the circuit to MATLAB Simulink via an Arduino Due.

Natural events such as floods, fires, tsunamis, earthquakes and others have nowadays caused serious damage to human beings and nature. The precise detection of these natural events and especially the earthquake has nowadays become the focus of many computer and geoscientific researchers. Computer science and machine learning algorithms have revolutionized early detection and prediction of these events. Hence, a fuzzy method has been initially used in this article to enhance the authenticity of data based on application of effective variables and then combination of neural network algorithms of the MLP perceptron and radial network of RBF in form of a collective learning system in order to more accurately identify seismic events on a small scale. It was observed after simulating the proposed method that the proposed method has significantly improved based on actual error and root-mean-square error (RMSE) criteria compared to basic methods.

In areas with a deep floor plan, the distribution of natural light is not uniform. Consequently, relying solely on daylight may not suffice to meet the space's lighting requirements, necessitating the use of artificial lighting in darker areas. Therefore, a lighting system is needed that not only controls the glare near the windows but also increases the light at the end of the room and provides uniform daylight. One of the widely used systems is the “light shelf“which has three main functions: shading, increasing the depth of light penetration and reducing glare. Review articles about light shelves have been done in 2015 and 2017, while more than 80% of the studies have been carried out since 2016 and light shelves with more diverse forms and dynamic elements and many consolidations were proposed. Therefore, there is a need for a more comprehensive review. The main question of this research is how different parameters (including climate, material, ceiling and integrated systems) can help to increase the efficiency of light shelves. By using a systematic review, studies in the past three decades were classified in order to determine the effect of these parameters on improving lighting performance and controlling solar heat gain.

The fundamental challenge for the structural design of complicated shapes and lightweight structures such as Tensile Membrane Structures (TMS) is a reliable estimation of lateral loading such as wind load. Wind pressure coefficients can’t be correctly calculated by standards for a large range of intricate forms of structures. Computational Fluid Dynamics (CFD), a strong computational technique for evaluating wind pressure distribution on complicated geometry, can be used to determine wind-related parameters. The average wind related-distributions for the tensile membrane surface are validated with a few contributions from prior studies, which are important to validate with benchmarks in experimental wind tunnel experiments. For the double-curved surface, the results show good agreement between experimental tests and CFD simulations. In this study, CFD simulation was used to calculate the mean surface pressure coefficient (Cp) for generic shapes and tensile membrane forms using the steady Reynolds-Averaged Navier-Stokes (RANS) technique. Wind force coefficients and the effect of wind directions are also explored across a wide range of classical and tensile forms. The purpose of the current research is to look at the effect of wind assault angle on the Cp distribution for tensile membrane structures and general shapes.

An investigation of compressible flow over two-dimensional obstacles is presented in this paper. When shock waves are formed on surfaces due to compressibility and these shocks interfere with the boundary layer, undesirable effects such as friction, separation, and flow instability occur. To weaken the shock and reduce its effects, various methods have been employed in the past, including surface suction, surface blowing, and vortex generators. Using numerical solutions, the present work attempts to reduce the negative effects of the shock generated by the obstacle by creating porosity on its surface. Numerical methods such as the finite volume method and the Navier-Stokes equations as well as the Spalart-Allmaras model are used. By creating suction and blowing and increasing the cross-sectional area of the flow, porous surfaces reduce the effects of shock. Achieving around 50% porosity on the obstacle weakened the shock and reduced the Mach number after it, according to this paper's results. Also, the area under the skin friction diagram has decreased by about 38% as a result of less interference between the shock and the boundary layer and blowing caused by the porous surface.

Compton cameras detect scattered gamma rays and estimate the distribution of gamma-ray sources. Nonetheless, crafting a camera tailored to a specific application presents formidable challenges, often necessitating the implementation of diverse image reconstruction techniques. Delving into the factors influencing these cameras can pave the way for design optimization and performance enhancement. This study introduces an inventive detector design for Compton imaging systems, building upon the achievements of prior designs. The proposed system contains eight scatterer detectors and a semiconductor absorber detector, spaced at 1 mm and 30 mm intervals, respectively. The source-to-first-scatterer-detector distance is 5 mm, with scatterer and absorber detector plates measuring 70× 70× 2.125 mm³ and 70× 70× 10 mm³, respectively. Geant4 simulation toolkit models the Compton imaging system, and an analytical method reconstructs Compton camera images. Unlike more straightforward techniques, the analytical method directly reconstructs Compton camera images by solving the equation relating to the reflected image data. This approach is implemented in the C++ programming language. The study's findings reveal that the analytical method discerns optimal conditions and parameters that significantly influence efficiency, yielding a full width at half maximum (FWHM) of 3.7 mm with an angular uncertainty of approximately 2.7 degrees at an energy level of 0.662 MeV. Compared to another experimental design employing the analytical image reconstruction approach, the FWHM value decreased by 0.7 mm. This study presents an innovative detector design and an analytical reconstruction method for Compton imaging systems, showcasing improved efficiency and accuracy.

This study will lead to the development of a numerical data set that will assist in the design of Savonius wind turbines. A major objective of this study is to develop a better design for Savonius turbine blades in order to increase their torque coefficients, rotational speeds, and pressure coefficients. As part of the experimental design methodology, a full dataset was generated by simulating three-dimensional scale models utilizing computational fluid dynamics (CFD) simulations that were validated by wind tunnel data. This process is multi-objective optimization for optimizing turbine performance. The twist angle, aspect ratio, and overlap ratio are all important factors in determining the optimal torque and power coefficients. The group method of data handling (GMDH) algorithm was utilized to model objective functions based on input-output data. The Pareto fronts were plotted using polynomial models obtained from the evolutionary Pareto-based optimization approach (modified NSGA-II), and the optimal commercial points were determined using TOPSIS. A comparison of three- and two-objective optimization data revealed that two-objective optimization data lie within the boundaries of a three-objective optimization problem. The torque coefficient, rotational speed, and power coefficient are all improved by 13.74%, 0.071%, and 5.32%, respectively, using multi-objective optimization. As a result of the multi-objective optimization of the turbine, some significant characteristics of objective functions were discovered.

Today, due to recent developments in technology, children devote plenty of time for screen viewing. However, its harmful effects are not yet clear. The purpose of present study was to examine the associations among screen viewing and sleep duration, and body mass index (BMI) in under-five years old children. This cross-sectional study was conducted with 322 under-five healthy children that were selected using multistage stratified cluster sampling method in 2017. The data that were gathered by time-use diary method were analyzed using Kolmogorov-Smirnov test, Spearman correlation tests, multiple linear regression analysis, one-way ANCOVA, two-way ANCOVA. There was a negative correlation between screen time and sleep duration (rs = -0.42, p = 0.00), positive correlation between screen time and BMI (rs = 0.38, p = 0.00) and sleep duration negatively correlated with BMI (rs = -0.22, p = 0.00). screen viewing was a predictive factor for both sleep duration (β = -0.26, p = 0.00) and BMI (β = -0.26, p = 0.00). screen viewing had a significant impact on sleep duration (4, 314) = 5.02, P = 0.001) and BMI (F (4, 314) = 1.16, P=0.298). Results of this study indicated that screen viewing is related to sleep duration and BMI in under-five children. furthermore, screen time has an impact on sleep duration and BMI scores of children. findings of our study suggest that sleep duration negatively is associated with BMI in under-five-year-old children.

Dementia, characterized by cognitive decline beyond age-related expectations, poses a formidable global health challenge. With an estimated 55 million individuals affected worldwide and 10 million new cases annually, dementia profoundly impacts memory, comprehension, language, and behavior. Then, the global diabetes population increased from 108 million in 1980 to 422 million in 2014, with a more rapid rise in prevalence observed in low- and middle-income countries compared to high-income countries. Individuals with diabetes have an increased risk of cognitive problems, including a higher likelihood of developing dementia, Alzheimer's disease, and vascular dementia, especially in older age. Managing diabetes through diet, physical activity, medication, and consistent screening and treatment for complications can prevent or delay its consequences.Globally ranking as the seventh leading cause of death, dementia's societal implications are substantial. The chapter delves into Mild Cognitive Impairment (MCI), a precursor to dementia, emphasizing its global epidemiological trends. Neuroimaging, particularly Functional Near-Infrared Spectroscopy (fNIRS), emerges as a non-invasive diagnostic tool, surpassing traditional imaging methods' portability. The chapter investigates the effects of non-invasive electrical stimulation on neurovascular tissues, shedding light on its impact including potential to address metaboreflex related reduced exercise tolerance. Furthermore, the chapter presents a clinical trial (ClinicalTrials.gov NCT04626453 and NCT04812288) examining the effects of a 2-month exercise program on cognitive function and muscular oxidative capacity in older adults with type 2 diabetes. The study's design, individualized exercise regimens to address muscle mechanoreflex and metaboreflex responses, and their physiological changes during exercise are discussed, offering insights into the interplay between exercise tolerance, cognition, and vascular health. The findings contribute to tailored and effective interventions for cognitive well-being. Here, our exploration extends to the application of transcranial electrical stimulation (tES) in optimizing exercise performance, with a focus on its various forms, including transcranial direct current stimulation (tDCS) and transcranial alternating current stimulation (tACS). A physiological modeling approach based on the neurovascular unit (NVU) is employed, revealing potential avenues for also treating vascular dementia (often noted to have a strong association with type 2 diabetes) through tACS, guided by human-in-the-loop approaches. Here, modal analysis for control is applied to assess the NVU model's characteristic dynamics under tACS, providing a comprehensive understanding of neurovascular coupling modes.In summary, this chapter synthesizes diverse facets in type 2 diabetes comorbidity and cognitive decline, ranging from global impact and diagnostic criteria to innovative interventions like exercise and transcranial electrical stimulation. The multidisciplinary approach integrates epidemiology, clinical trials, and physiological modeling, contributing valuable insights into the holistic management of cognitive health and neurovascular function.

A Savonius wind turbine is one of the simplest vertical-axis turbines. Several researchers have been attracted to it because of its simple structure, low noise, appropriate torque, and independence from wind direction. SR3345 and SR5050 blade profiles will be investigated for their effects on the performance of Savonius wind turbines. First, the fabricated wind turbine is placed in front of an open circuit wind tunnel with a velocity of 6 m/s. Furthermore, governing relationships are used to calculate power and torque coefficients as well as tip speed. In this study, the power and torque coefficients of the turbine are compared with the two profiles considered based on overlap ratios between 0 and 0.3. Despite its increased stability, the central shaft reduced the power coefficient of the turbine. For blade SR3345, the best performance occurs at tip speed ratios of less than 1, while for blade SR5050, the best performance occurs at higher tip speed ratios. Both blades SR3345 and SR5050 achieve the highest power coefficients at overlap ratios of 0 and 0.18 when a central shaft is present.

Buildings are responsible for approximately 40% of global energy consumption, putting pressure on the construction industry to mitigate its environmental impact. Therefore, there is an urgent need for innovative solutions to reduce power consumption, particularly in lighting systems. The study’s primary objective was to investigate novel integrated lighting solutions that significantly reduce energy use and they explore their enhancement through Building Information Modeling (BIM) and the Internet of Things (IoT) to further improve energy efficiency and reduce the carbon footprint in buildings. Hence, this literature review aimed to examine energy-saving actions, retrofitting practices and interventions across a range of multi-use buildings worldwide over the past six years. The objective was to diagnose the goals being undertaken and ultimately validate new actions and contributions to minimise energy consumption. First, daylight harvesting and retrofitting solutions were examined in conjunction with the latest technologies, also referred to the external shadings. In consequence of this matter, comes the lack or unappropriated coordination, and so waste of energy, between daylight and electrical lighting. Secondly, how the integration of BIM facilitates the design process, providing a complete overview of all the variables of the building, thus improving indoor daylight performance and proper lighting with energy analysis. Lastly, the review addresses the role of IoT in providing real-time data from sensor networks, allowing for continuous monitoring of building conditions. This systematic literature review explores the integration of the fields to address the urgent need for innovative strategies and sustainability in the built environment. Furthermore, it thoroughly analyses the current state of the art, identifying best practices, emerging trends and concrete insight for architects, engineers, and researchers. The goal is to promote the widespread adoption of low-carbon systems and encourage collaboration among industry professionals and researchers to advance sustainable building design.

Coronavirus disease 2019 (COVID-19) has been first appeared in Wuhan, China but its fast transmission, led to its widespread prevalence in various countries and make it a global concern. In addition, lack of a definitive treatment is another concern that needs to be attention. Researchers have come up with several options, which are not certain, but protease inhibitor and some antiviral agent are in the forefront. In this study a virtual screening procedure employing docking of different databases including 1615 FDA approved drugs was used to identify new potential small molecule inhibitors for protease protein of COVID-19. The docking result indicates that among all, simeprevir (Hepatitis C virus (HCV) NS3/4A protease inhibitor) could fit well to the binding pocket of protease and because of some other positive features including ADME profile, might be a helpful treatment option for COVID-19.

EV transmissions operate at high speeds, upto 30,000 rpm. High speed operation puts higher demands on bearings, seals, and gears. Bearings in EV transmissions are prone to electrically induced bearing damage and may exhibit signs of pitting and fluting. Surface-initiated rolling contact fatigue is another common problem gaining increased attention lately. Most EV transmissions require a coupling between an oil-lubricated gearbox to an electrical motor that runs with minimal lubrication at very high rpm. High mechanical and thermal stresses the seals are exposed to under starved lubrication conditions have a detrimental impact on their service life. Hence, proper lubrication is critical. In general, EV transmission fluids call for a somewhat different spectrum of properties compared to conventional ATF. Gear tribology simulations open new ways to the design and optimization of lubrication for EV transmissions. Additionally, such simulations can also provide valuable insights into the effects of different oil properties on cooling and lubrication efficiencies, thereby helping in matching the lubricant and hardware characteristics for optimal performance. In the present communication, we demonstrate the effects of different lubricants and surface finishing technologies on the tribology of high-speed gears using tribological tests and advanced thermal elastohydrodynamic (TEHD) simulations. Important roles of lubricity additives and surface finish optimization are highlighted in conjunction with a move towards ultralow viscosity EV transmission fluids.

Heat exchangers play a vital role in numerous sectors like power generation and automotive manufacturing. Enhancing the energy efficiency of these exchangers stands as a significant hurdle. Utilizing nanofluids emerges as an optimal solution to augment heat transfer rates, leveraging their superior thermal conductivity while addressing economic constraints linked with traditional heat exchanger technologies. The motivation for this study is to consider the comprehensive synergistic features of MWCNTs, SiO₂, and hybrid MWCNTs–SiO₂ EG-based nanofluids in plate heat exchangers. This was achieved by simulating a plate heat exchanger using CFD (Fluent and Gambit softwares) considering the comparison of two SiO₂, MWCNTs, and their hybrid forms at different mass concentrations. The Reynolds-Averaged Navier-Stokes (RANS) method was employed to model turbulent flows, and the nanoparticles were compared in both single-phase and two-phase states, with their properties derived from experimental studies. Moreover, Nusselt number, convective heat transfer coefficient, and pressure drop variations were computed at different Reynolds numbers. The findings indicated an increase in the Nusselt number with the incorporation of the hybrid nanofluid, achieving a maximum enhancement of 11.19% in comparison to EG at a Reynolds number of 240 and a concentration of 0.86 wt.%. Noticeably, the pressure drop remained negligible at lower Reynolds numbers, exhibiting marginal variations up to 0.3% at higher Reynolds numbers. At a concentration of 0.86 wt.% and a Reynolds number of 480, the introduction of MWCNTs, hybrid, and SiO₂ nano-additives resulted in respective increases in the heat transfer coefficient by 21.02%, 10.76%, and 2.16% and corresponding alterations in pressure drop of 0.11%, 0.04%, and 0.02%.

In this article, metallic additive manufacturing (AM) processes were classified and demonstrated. AM technology can be applied to a wide range of industrial areas because of its great feasibility in the design and manufacturing of various complex parts. The main factor that distinguishes various metallic AM processes from each other is the deposition method. Deposited metal can be imported in the form of melt or semi-solid. AM technology also covers a wide range of materials like aluminum, titanium, and many other alloys. Some of the common applications of metallic AM processes are the quick manufacturing of the parts which utilized in various industries like medical, automotive, aerospace, and jewelry industries. AM can help to fabricate parts that are impossible to be manufactured by other processes.

Nowadays, the wasting of resources is one of the fundamental challenges of the industrial sector. The rectangle packing problem can be very effective in this context. Practical applications of this issue in the timing and designing of the industries and businesses are very remarkable. The purpose of this issue is to arrange a set of rectangles with specific dimensions in a rectangular page with a specific width and unlimited height without overlapping. The fundamental challenge in this issue is that this is an NP-complete issue. Therefore, it is difficult to achieve the best arrangement, which has the maximum rate of resource utilization and also has a linear running time. Many algorithms have been presented to estimate a practical solution for this issue. In the past decades, the best fit method has been one of the most useful methods for this purpose. This study presents a combinatorial algorithm based on two algorithms, including the lowest front-line strategy and the best-fit algorithm. The running results indicate that the suggested algorithm performs well, despite its simplicity. The time complexity of the suggested algorithm is O(nm), in which n is the number of input rectangles and m is the number of the created front lines.

Blasting pattern optimization is an attempt to optimize blast design parameters aiming to achieve optimum fragmentation, reduce mining operating costs as well as environmental side consequences. The present study aims to propose a multi-objective optimization model, employing artificial intelligence and metaheuristics, to simultaneously minimize the mine-to-crusher operating costs and the impact of blasting consequences including fly-rock and back-break. To achieve the purpose of the study, a multi-variable regression model was developed to model total costs from drilling to crushing. In addition to the costs, multilayer perception neural networks were implemented to predict the blast-induced back-break and fly-rock as a function of collected variables such as number of holes, hole length, burden, spacing, hole slope, stemming, blasted rock per hole, powder factor, and charge per delay. High-precise estimations for both back-break and fly-rock were achieved with the average of 99% coefficient of determination for train, test and validation data sets. Then, the developed regression model and the neural networks were used in an optimization framework, employing Grasshopper algorithm, to find the optimum blast design satisfying practical constraints. The proposed model was tested on a lead-zinc open-pit mine, where 1032 blasting patterns were recorded and analyzed. The results of the optimization model provide a Pareto set of solutions, such that any of these solutions can be implemented according to the strategy of the mining operation management team. The blast pattern with the lowest cost, result in a relatively high fly-rock and back-break, while the pattern with low fly-rock and back-break raises the cost by 20.13 % compared the minimum cost blast design.

The effect of divergence of chute sidewalls with three different baffle block geometries namely USBR, trihedral and semicircular blocks, as well as the depth and dimensions of the scour hole downstream of the chute were studied using a physical model. For this purpose, 9 models of baffled chutes were designed and constructed with divergence ratios of 1.45, 1.75, and 2.45 and without divergence (with a divergence ratio of 1). Comparing the results on the effect of block geometry at different divergence ratios revealed that the use of blocks proposed in this study instead of standard USBR blocks reduced the mean and maximum scour hole by 50%. For a given block geometry, the mean depth, maximum depth, and length of scour hole were reduced by 75%, 58%, and 50%, respectively.

The synchronous generator, as the main component of power systems, plays a key role in these system’s stability. Therefore, utilizing the most effective control strategy for modeling and control the synchronous generator results in the best outcomes in power systems’ performances. The advantage of using a powerful controller is to have the synchronous generator modeled and controlled as well as its main task i.e. stabilizing power systems. Since the synchronous generator is known as a complicated nonlinear system, modeling and control of it is a difficult task. This paper presents a sum of squares (SOS) approach to modeling and control the synchronous generator using polynomial fuzzy systems. This method as an efficacious control strategy has numerous superiorities to the well-known T–S fuzzy controller, due to the control framework is a polynomial fuzzy model, which is more general and effectual than the well-known T–S fuzzy model. In this case, a polynomial Lyapunov function is used for analyzing the stability of the polynomial fuzzy system. Then, the number of rules in a polynomial fuzzy model is less than in a T-S fuzzy model. Besides, derived stability conditions are represented in terms of the SOS approach, which can be numerically solved via the recently developed SOSTOOLS. This approach avoids the difficulty of solving LMI (Linear Matrix Inequality). The Effectiveness of the proposed control strategy is verified by using the third-part Matlab toolbox, SOSTOOLS.

The coronavirus disease 2019 (COVID-19), caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has become the chief concern of the international community in almost no time. As of May 9th, 2021, more than 150 million cases and 3.2 million deaths have been recorded. Considering the early struggle in treating COVID-19 patients, the researchers and clinicians have decided to try the previously available drugs according to their mechanisms of action. Hence, many antivirals, antibiotics, antiparasitics, and antipyretics have been proposed. Pregnant women, fetuses, and infants are known high-risk populations that are threatened during disease outbreaks. Therefore, this article reviews the safety of potential drugs for COVID-19 patients during pregnancy and breastfeeding.

This study investigates the emerging applications of Artificial Intelligence (AI) in strategic management and its impact on organizational decision-making processes. As AI technology rapidly advances, it has become a crucial component in redefining organizational strategies. According to a global survey by the Boston Consulting Group, over 60% of executives believe that AI can significantly improve key performance indicators and enhance opportunities for strategic differentiation and sustainable competitive advantages. Using a descriptive-survey methodology and questionnaire-based data collection, this research examines the influence of AI on strategic decision-making in large organizations. The statistical population comprises senior managers across various industries, with sampling conducted through convenience sampling. Data analysis was performed using SMART-PLS software, revealing significant improvements in strategic decision-making processes through AI implementation. The study demonstrates that AI, by analyzing complex data sets and identifying hidden patterns, assists managers in making more optimal decisions. Furthermore, AI's predictive analytics capabilities contribute to enhanced strategic planning and risk mitigation in decision-making processes. The research findings indicate a statistically significant positive correlation (r = 0.72, p < 0.001) between AI adoption and the quality of strategic decisions. This paper concludes by proposing that organizations should leverage AI as a tool to strengthen their organizational strategies, while emphasizing the importance of ethical considerations and human oversight. The implications of this research extend to both academic and practical domains, offering insights into the integration of AI in strategic management processes and its potential to revolutionize organizational decision-making paradigms.

Purpose: This study investigates the influence of human brands on the formation of Generation Z's digital identity. Given the increasing importance of the digital space in this generation's life, understanding how their identity is shaped by human brands in this environment is crucial. Method: Using a netnographic approach, qualitative data was collected and analyzed from 500 posts and interactions of Gen Z users on Instagram and TikTok platforms. Thematic content analysis was conducted using NVivo 12 software, with inter-coder reliability confirmed (κ = 0.85). Findings: Results indicate that human brands influence Gen Z's digital identity through three main mechanisms: 1) lifestyle emulation (β = 0.42, p < 0.001), 2) value alignment (β = 0.38, p < 0.001), and 3) self-presentation modeling (β = 0.35, p < 0.01). Multiple regression analysis showed these three factors explain 67\% of the variance in digital identity formation (R² = 0.67, F(3,496) = 335.42, p < 0.001). Conclusion: This study demonstrates that human brands play a significant role in shaping Generation Z's digital identity. Understanding this influence can help marketers and policymakers design more effective strategies for engaging with this generation.

The COVID-19 pandemic has profoundly disrupted small businesses, exacerbating financial vulnerabilities and operational challenges. As these enterprises play a crucial role in economic stability and growth, identifying effective recovery strategies is imperative. This study investigates the legal and management solutions necessary for small businesses to recover and thrive post-pandemic. The research aims to examine the economic impact of the COVID-19 pandemic on small businesses, evaluate the effectiveness of existing legal and governmental support measures, and propose management strategies that enhance resilience and drive recovery. A mixed-methods approach was adopted, comprising both quantitative and qualitative analyses. A survey was conducted with 500 small businesses across various sectors to collect data on financial performance, operational disruptions, and the utilization of government support programs. Additionally, 30 in-depth interviews with small business owners provided qualitative insights into adaptive strategies and challenges faced. A review of relevant legal documents and policy frameworks was also performed to assess the support mechanisms in place. The study revealed that 68% of small businesses experienced substantial revenue losses, with 50% encountering severe liquidity crises. Government support measures, such as grants and low-interest loans, were pivotal but often marred by accessibility issues and delays. Successful management strategies identified included accelerating digital transformation, diversifying revenue streams, and optimizing supply chain management. Legal measures that temporarily eased regulatory requirements and offered tax relief significantly aided in alleviating immediate pressures. The economic recovery of small businesses post-COVID-19 hinges on comprehensive legal and management solutions. Enhancing the effectiveness and reach of government support programs is crucial, as is the adoption of agile and innovative management practices by small businesses. Policymakers and business leaders must work collaboratively to create an environment that fosters resilience and sustainable growth, ensuring small businesses can navigate future economic uncertainties.

This study examines the effects and durability of postural exercise on gait kinematics in people with intellectual and developmental disabilities (IDD). Thirty-four men with mild IDD were assigned to either the training group (n = 19) or the control group (n = 15). The TG performed the intervention over 8 weeks, 3 days/week, 1 h/day. The results indicated that the intervention program had a significant effect on some variables of gait. Also, in the TG between post-test and follow-up, there was no significant difference, which indicated that gait variables were maintained by the TG one month after the end of the program. This study provides evidence that postural exercises can be used as an effective intervention for improving gait in individuals with IDD.

Recent developments in microfluidics and biomaterials have enabled the creation of organs-on-chips (OoCs), which provide a controlled and lifelike in vitro microenvironment resembling an actual organ. Organ-on-a-chip technology offers a tremendous opportunity for efficient, cost-effective, and ethical drug testing and research. However, the high throughput and large quantities of data these complex microenvironments produce make it difficult for researchers to effectively analyze the data and draw valuable conclusions. Convolutional Neural Networks (CNNs) are most aptly positioned to address many of OoC’s challenges because of their ability to interpret microscopic images and facilitate the analytical process. Despite the growing field of AI, there have been a limited number of studies summarizing the various applications of CNNs in OoCs. This review aims to provide 1) an overview of the technology involved with CNNs and OoCs 2) an insight into the state-of-the-art applications of CNNs in OoCs including device parameters, predicting and tracking cell trajectories, super-resolution image segmentation, and image classification, and 3) an overview of existing challenges and opportunities ahead for clinical translation of this technology. Various applications of CNNs have been classified by the type of task. Different CNN models such as Faster R-CNNs, fully convolutional networks (FCNs), and Mask R-CNNs are explained and highlighted. This review article can be used as a resource for a better understanding of the potential of CNNs in biomedical research and clinical applications, particularly OoCs.

Resilience is a particularly important quality for supply chains in this turbulent environment. Resilience in supply chain is the ability to retain, resume, and recover operations after an intense destructive incident. One of the strategic solutions for managing supply chain disruptions is to establish collaboration and strategic alliances in order to achieve competitive advantage. Therefore, given the increasing publication of articles in areas of strategic alliances and supply chain resilience, it is a good opportunity to review these articles, identify gaps in the current literature, demonstrate links between the two areas, and provide suggestions for future research. For these purposes, a bibliometric analysis has been performed on literature available on the Web of Science database. The distribution of articles based on year and country, influential journals, research areas, authors, affiliations, keywords, citations, and reference co-citation analysis are discussed. Results indicate that studies about strategic alliances, meant to increase resilience, are growing in areas such as “Management”, “Operations research”, “Management science”, and “Business”. Furthermore, the sources could be categorized in five clusters; namely “From knowledge concept to value creation”, “Internal and external relationships”, “Logistics and supply chain performance”, “Intellectual capital and strategic management”, and “Critical success factors and alliances”. This article can be useful for both practitioners and academics who explore the topic of strategic alliances and resilience in supply chain and also offers managers the opportunity to overcome supply chain disruptions and negative consequences of risks by becoming familiar with the key concepts of resilience. The persistence of businesses and supply chains is guaranteed through communicating with partners and even competitors in the light of alliance according to the findings of this research. Managers can pay attention to the integration of the supply chain to improve resilience and increase collaboration between suppliers and customers. Given the research results, strategic alliances can be noted in expanding organizational entrepreneurship, and shaping strategic collaboration networks in light of strategic alliances.

In this paper, the distribution of prime numbers is expressed based on proving the Riemann hypothesis. The relationship between three numbers, three, six, and nine, and the modality to the distribution of prime numbers, is one of the results of Riemann's zeta function. Prime numbers are classified into six groups of single-digit numbers. There are no prime numbers in groups of three, six, and nine. The groups are made based on the sum of the internal digits. And for each set, there is an angle in the complex plane. The distance between the prime numbers in each group has a regular pattern. This pattern is a multiple of the numbers three, six, and nine. According to Euler's number, for an angle of 60 degrees, the real part of the cosine is 1/2. Accordingly, all prime numbers are related to angles greater than 60 degrees to 90 degrees. As a result, based on the relationship between the golden spiral and the complex conjugate of the zeta function, the function in The 1/2 point becomes zero based on the prime numbers.

Since its emergence, COVID-19 has caused a great impact in health and social terms. Governments and health authorities have attempted to minimize this impact by enforcing different mandates. Recent studies have addressed the relationship between various socioeconomic variables and compliance level to these interventions. However, little attention has been paid to what constitutes people's response and whether people behave differently when faced with different interventions. Data collected from different sources show very significant regional differences across the United States. In this paper, we attempted to shed light on the fact that a response may be different depending on the health system capacity and each individuals’ social status. For that, we analyzed the correlation between different societal variables (i.e. education, income levels, population density, etc.) along with healthcare capacity related variables (i.e. hospital occupancy rates, percentage of essential workers, etc.) with regards to people's level of compliance with three main governmental mandates in the United States: mobility restrictions, mask adoption, and vaccine participation. Our aim was to isolate the most influential variables impacting behavior in response to these policies. We found that there was a strong relationship between individuals' educational levels and political preferences with respect to compliance with each of these mandates.

Stevia rebaudiana Bertoni, a perennial herb, has garnered significant attention for its diterpene glycosides, natural sweeteners approximately 250 to 300 times sweeter than sucrose. These glycosides, concentrated in the plant's leaves, not only serve as a low-calorie alternative to traditional sweeteners but also exhibit notable antimicrobial properties, making Stevia a promising candidate for both the food and pharmaceutical industries. In order to study the effect of mycorrhiza fungi on some growth characteristics of the stevia herb under inoculum conditions with Arbuscular mycorrhizal fungi(AMF)Arbuscular mycorrhizal fungi, a factorial experiment based on randomized complete block design with four replications was conducted at University of Mohaghegh Ardabili. The first factor was Imma & Angel and Novella nutrient solutions; the second was planting bed including leaf composts, vermicompost, and biolan (peat & perlite); and third factor involved inoculation with mycorrhiza (Glomus Musea). The control fungi indicated that the highest percentage of stevioside (16.45%) was related to vermicompost planting bed under conditions of invocation with mycorrhizal in harvest for the Imma and Angel nutrient solution. The maximum percentage of Rebaudioside A (7.57%) was related to vermicompost planting bed under conditions of invocation with mycorrhizal in harvest for the Novella nutrient solution. Further, the greatest levels of Rebaudioside C were obtained under the same conditions, with the difference that in the case of this glycoside, the leaf composts planting bed showed a higher percentage. Then, the highest leaf fresh weight, leaf dry weight, and number of main branches were obtained for the Novella nutrient solution in vermicompost planting bed under inoculation with mycorrhiza. Finally, Mycorrhizal inoculation in vermicompost beds with the Novella nutrient solution resulted in the greatest plant height. Conversely, the Imma & Angel nutrient solution in leaf compost beds, when combined with mycorrhizal inoculation, produced the tallest plants. The positive impact of AMF on plant growth was evident in the quantitative and qualitative improvements observed across various measured parameters.

The neural system has limited resources to interact with the environment, and this is where attention comes into play. Attention is a complex process that provides numerous benefits, but there has been a longstanding debate about the mechanisms involved in attentional orientation. Two widely proposed mechanisms are top-down and bottom-up, which relate to the organism's current behavioral goal and the salience of environmental stimuli, respectively. However, distinguishing between these mechanisms can be challenging in both behavioral and neural studies. This review introduces a new conceptualization in which both top-down and bottom-up mechanisms are viewed as aspects of the same process. This unified approach aims to prepare the organism to face stimuli and events based on its prior experiences, immediate (the current task that he/she is aware of), and innate (to be alive) demands.

This study investigated the impact of seven-strain probiotic supplementation on the frequency of T helper 17 (Th17) cells, regulatory T (T-reg) cells, Treg/Th17 ratio, and their gene expression in individuals with severe traumatic brain injury (STBI). Probiotics can influence the gut microbiota, modulate the immune response, and prevent or alleviate certain immune diseases. However, it is necessary to clarify whether probiotics can effectively impact Th cells in STBI patient. Despite the great attention to improving the immune system in most diseases, there is currently no accurate mechanism for the use of probiotics in diseases with damage to the head injury, which can be a basis for the use of probiotics. The primary objective of this study is to address this research gap. The present study was a randomized, double-blind, placebo-controlled trial that enrolled 48 STBI patients. They were treated with probiotics or placebo: 4 capsule/day for 14 days. The pre- and post-study evaluation included examining the frequency of Treg, Th17 cells, as well as the expression of associated immunological parameters (Foxp3 and RORγt) and Treg/Th17 ratio in both groups. No significant differences were found between the two groups in terms of subject characteristics (P>0.05). GCS scores at 14 days were significantly higher in the probiotic compared to the placebo group. The probiotic group showed a significant decrease in Th17 cell and RORγt gene expression (P = 0.022 and P< 0.001, respectively), a notable increase in T-reg and FoxP3 gene expression (P= 0.025 and P< 0.001, respectively), and a higher Treg/Th17 ratio compared to the placebo group. Our study provides promising evidence of the beneficial effects of seven-strain probiotic supplementation on Th cells in individuals with STBI.

Intratumor heterogeneity (ITH) is associated with therapeutic resistance and poor prognosis in cancer patients, and attributed to genetic, epigenetic, and microenvironmental factors. We developed a new computational platform, GATHER, for geostatistical modeling of single cell RNA-seq data to synthesize high-resolution and continuous gene expression landscapes of a given tumor sample. Such landscapes allow GATHER to map the enriched regions of pathways of interest in the tumor space and identify genes that have spatial differential expressions at locations representing specific phenotypic contexts using measures based on optimal transport. GATHER provides new applications of spatial entropy measures for quantification and objective characterization of ITH. It includes new tools for insightful visualization of spatial transcriptomic phenomena. We illustrate the capabilities of GATHER using real data from breast cancer tumor to study hallmarks of cancer in the phenotypic contexts defined by cancer associated fibroblasts.

Abstract: Lipidic carriers employed for the entrapment, encapsulation and precise targeting the bioactive compounds offer significant advantages to the biomedical, pharmaceutical, nutraceutical and cosmeceutical industries. These lipid and phospholipid-based vesicles can improve the solubility, permeation, pharmacokinetics, pharmacodynamics and bioavailability of the encapsulated material. As a matter of fact, nano-sized phospholipid vesicles have attained the highest success rate in commercialization among the available drug encapsulation technologies. Nevertheless, developing industrially acceptable products still remains a challenge. Among the main disadvantages of conventional lipidic carriers are their instability in the biological environments, and their sensitivity to changes in the pH, temperature and enzymes. To overcome these problems, the new generation of phospho/lipid-based carrier systems was developed using ingredients from microorganisms living in extremely harsh environments (i.e., archeaeobacteria). The present entry aims to review unique features of archaeolipids and recent developments in their application for the encapsulation of genetic material as well as their role and function as adjuvants and vaccine candidates.

Background: Cancer has been one of the most critical health problems during the past decades which require serious consideration, especially in developing countries. Methods: 80 parents of the children with different types of cancers were studied via both questionnaire and person-to-person interview after announcing their informed consent. Results: The highest delay in patients' initial referral was due to the following factors: lack of attention or ignoring the first symptoms, delay in referring to the physician, low economic status and even lack of family support for the patient. In addition, visiting several doctors after the initial diagnosis, uncertainty about the first proposed method, and high cost of treatment can be mentioned as the main causes of delays in the start of treatment. Conclusion: Education plays an important role in identifying the signs of cancer. In addition, proper relationship and cooperation between the health system and physicians as well as provision of adequate information to patients could lead to the long-term cooperation of these patients in continuing their treatment.

Dynamic Realistic Failure Process Analysis (DRFPA) is a numerical software based on FEM it is firstly validated by comparing with the experimental test. Such validation is carried out under two consistent concrete specimens under uniaxial compression. After validation, DRFPA is used to study the influence of two parallel pre-existing crack inclination angles on the fracture of concrete under dynamic loads. The evolution of wing cracks and secondary cracks is investigated by observing the initiation, coalescence, and propagation of them. Meanwhile, the relationship between failure mode and inclination angles is discussed via analyzing the acoustic emission events. Finally, it is concluded the relationship between inclination angles of pre-cracks and performance/stability of concrete structure.

On the basis of the golden ratio and the compasseses, every angle was divided into three equal parts. In general, it has been proven that the problem of triangulation of an angle cannot be solved on the basis of the golden ratio and the expanding of the angle. The relationship of golden relativity with Pi number and Euler's number has not been investigated to solve impossible problems. According to the investigation of events in six-dimensional space-time, with the simultaneous movement of two arms of the compasses based on the golden ratio, every angle was divided into three equal parts. The growth rate based on the golden ratio is the key to solving the most intractable mathematical and physical problems.

Consciousness results from comprehending the living creature from its existence in time and space. Thought and consciousness are distinguishing factors between humans and machines having artificial intelligence. No algorithm has been offered for artificial self-awareness based on Thinking. Previous studies have not studied the relationship between consciousness, thinking and time. In this study, the relationship between consciousness, thinking, memories and speech over time has been studied. A deep logical connection exists between consciousness, thinking, and time. An algorithm can be designed for artificial consciousness based on this research findings.

This paper presents a method for producing a gravity field through an electromagnetic field. The electromagnetic field can produce a positive or negative gravity field. The relationship between gravity force and electromagnetic is unknown. Former studies by theoretical physics predict the relationship between these two forces. Based on the general balance theory in six dimensions of space and time, the electromagnetic field was studied from this viewpoint. Three-dimensional waves oscillate in the fourth dimension and electromagnetic waves distort space-time. Aggregating these distortions can behave like a positive or negative gravity field. Consequently, the production of energy is possible from gravitational fields.

A human brain can communicate with another one’s brain using quantum entanglement. Similar particles can entangle without interaction. Sensory communication between two individuals from far distances is still not known. Former studies primarily have been performed regarding brain neurons' quantum behavior. The test was performed on two individuals far from each other. These individuals were put under the same music on the basis of brain neuroplasticity property. By activating the brain reward system, aligned thinking was time scheduled in these individuals’ brains. On the basis of entanglement, compressed information was sent and received between these two individuals.

On the basis of the findings of this paper, the theories of quantum mechanics and general relativity can be expressed in a comprehensive theory. The events were surveyed length of the time, in the Euclidean six-dimensional space-time (R6=x1+x2+x3+t1+t2+t3). Previous studies have not studied the relationship between the origin of matter's inherent properties, fundamental constants, and quantum mechanics phenomenon with space-time geometry. This theory prediction the with certainty obtained probabilistic results of quantum mechanics. This prediction is on the basis of metric resulting from the Eccentricity of the Ellipse due to the object density, in the length of time. The cause and nature of dark matter and dark energy are the findings of this article.

Design and advancement of the durable urban train infrastructures are of utmost importance for reliable mobility in the smart cities of the future. Given the importance of urban train lines, tunnels, and subway stations, these structures should be meticulously analyzed. In this research, two-dimensional modeling and analysis of the soil-structure mass of the Alan Dasht station of Mashhad Urban Train are studied. The two-dimensional modeling was conducted using Hashash’s method and displacement interaction. After calculating the free-field resonance and side distortion of the soil mass, this resonance was entered into PLAXIS finite element program, and finally, stress and displacement contours together with the bending moment, shear force and axial force curves of the structure were obtained.

Although lithium-ion batteries have extensively been used in various applications because of their high energy capacity, fracture and failure, the by-products of large strains and stresses caused by fast charging and discharging need yet to be addressed. The size effects on the mechanical behavior of the nano-sized structures are significant; however, the classical elasticity theory may not consider such effects. On the other hand, surface stress theory, as a robust and potential theory, is suitable in considering size effects in nano-scale structures. Therefore, in this paper, in order to involve the surface stress effects on the fracture behavior of Li-ion batteries, the following steps are taken. Firstly, a phase-field model is used to determine the evolution of the concentration profile. Subsequently, the stress distribution is obtained by using the surface stress theory combined with chemical equations for a planar electrode. Afterward, by using the weight function method for an edge crack in the plate, the stress intensity factor is derived for all time steps and possible crack lengths during the process. It is found that with increasing phase boundary thickness parameter or decreasing phase-separation phenomenon, the surface mechanics parameters become more influential. Furthermore, in the presence of positive surface stress, the diffusion-induced stress distribution decreases, which in turn reduces the stress intensity factor. In addition, in this paper, the two states of surface stress are compared either for elastic or total strain. Concerning stresses and concentrations, the results indicate a big difference at the beginning of the deintercalation process showing, in particular, 2% for stresses, but the differences diminish gradually.

Memory is probably one of the most complex cognitive functions of the human, and in many years, thousands of studies have helped us to better recognize this brain function. One of the reference textbooks in neuroscience, which has also elaborated on the memory function, is written by Prof. Kandel and his colleagues. In this book, I encountered a number of ambiguities when it was explaining the memory system. Here, I am sharing those points, either to find an answer for them, or to let them be a suggestion for our future works. Prof. Kandel has spent most of his meritorious lifetime on studying the memory system; however, the brain is extremely complex, and as a result, we still have many years to comprehensively understand the neural mechanisms of brain functions.

Despite the 12-lead electrocardiogram (ECG) being the gold standard in evaluating clinical presentations of arrythmias of various kinds, several notable limitations, namely in accuracy and localization, have recently garnered concern with respect to administering appropriate therapeutic measures. The following text puts these limitations under the spotlight, highlighting the difficulty and challenging nature of standard ECG analysis and therapeutic measures, while simultaneously showing a novel body surface electrocardiographic mapping system that utilizes 3D spatial imaging and pinpoint localization algorithms in order to compensate for the shortcomings of the standard ECG, thereby providing higher precision data collection. We provide a brief overview of the novel device in a selection of arrhythmic demographics, along with its validity and reliability, while illustrating the benefits and positive outcomes of its utility.

Promoter choice is an essential consideration for transgene expression in gene therapy. The expression of multiple genes requires ribosomal entry or skip sites, or the use of multiple promoters. Promoters systems comprised of two separate, divergent promoters may significantly increase the size of genetic cassettes intended for use in gene therapy. However, an alternative approach is to use a single, compact bidirectional promoter. We identified strong and stable bidirectional activity of the RPBSA synthetic promoter comprised of a fragment of the human Rpl13a promoter, together with additional intron / exon structures. The Rpl13a-based promoter drove long-term bidirectional activity of fluorescent proteins. Similar results were obtained for the EF1-α and LMP2/TAP1 promoters. However, in a lentiviral vector, the divergent bidirectional systems failed to produce sufficient titres to translate into an expression system for dual chimeric antigen receptors (CAR) expression. Although bidirectional promoters show excellent applicability to drive short RNA in Sleeping Beauty transposon systems, their possible use in the lentiviral applications requiring longer and more complex RNA, such as dual CAR cassettes, is limited.

This paper presents proof of Riemann's hypothesis by utilizing the golden ratio and the ellipse's eccentricity in six dimensions. This proof extends across all scientific fields. this research introduces logical and mathematical principles for distributing, recognizing, and categorizing prime numbers. It also explores the relationship between prime numbers and the complex conjugate of five prime numbers in various dimensions. Accordingly, it delves into the classification of even numbers based on prime numbers. This study examines the proof of Riemann's hypothesis from a geometric dimension perspective. Based on this, the mathematical structure of an integrated theory is defined. properties and principles associated with prime numbers reveal connections between quantum mechanics and general relativity.

In this paper, the P versus NP problem is studied based on a six-dimensional space-time perspective. The gap between the P-class and NP-class arises from the relationship between time and the solution, as well as the answer that is independent of time. The complexity of solving a problem depends on the time dependence of the answer. Solving problems whose answers do not depend on the passage of time is very difficult and impossible. Like the description of the gravitational factor in Newtonian physics, NP class problems require different mathematical tools. Based on the generalization of physical facts in mathematics, based on six-dimensional space-time, a method to solve problem P versus NP problem has been stated. The results of this study offer a fresh insight into information processing that occurs independent of the passage of time.

In the previous work, the pure fatigue behavior of AM60 magnesium alloy (PF-AM60) was compared with the corrosion fatigue behavior of these specimens (CF-AM60). In this research, in continuation of the previous job, the pure fatigue behaviors of AM60 with polylactic acid (PLA) coating (PF-AM60-PLA) and also, corrosion fatigue behaviors of magnesium alloy with PLA coating (CF-AM60-PLA) were evaluated. Polymer coating was made by fused deposition modeling (FDM) with a 3D printer and attached to standard fatigue test specimens with a glue. Then, they were immersed in the simulated body fluid (SBF) for 27 days. In the end, a high-cycle bending fatigue test was performed on samples. The fracture surface of the samples was also observed using the field emission scanning electron microscopy (FESEM). Due to corrosion, the weight of the specimens redcued by an average of 35%. The corrosion rate decreased in the first 7 days and then increased. PF samples with coating had an average of 49% increase in fatigue lifetime. Regarding the CF samples, despite the use of a 10 times stronger solution, the fatigue lifetime of these samples decreased by only 35%. FESEM results also showed cleavage plates and striations. In addition, the separation of the glue from the coating and Mg was observed. Corrosion products including microcracks and holes were seen on the fracture surface of CF specimens, which caused stress concentration and crack growth. Holes caused by the release of gases were also observed in polymer coatings.

Aims: Adolescence is a critical period because the brain is involved in the process of maturation that entails cognitive functions. On the way of maturation, an individual’s inhibitory control undergoes many changes and becomes vulnerable to different thrill-seeking like smoking, drinking, and so on. Smoking is highly prevalent among teenagers that are trying to take control of their behaviors in order to join society. They experience antisocial behavior too which is a trait that can lead adolescents to addiction. This trait is an inevitable part of psychopathy. Inhibitory deficits and psychopathy have been widely reported in addiction studies. The current study tried to investigate the relationship between psychopathic traits and behavioral inhibition between male smokers and non-smoker teenage students.Materials & Methods: Statistical sample of this research is 62 teenage students aged 17 years that are divided into smoker and non-smoker groups. The participants have been chosen through random sampling from the population of 10 high schools. The data have been gathered in Kordkoy and Gorgan in Golestan province. Behavioral bias has been measured by Go/NoGo task and psychopathic traits through youth psychopathic traits inventory. Also, the short form of Wechsler Adult Intelligence Scale test has been executed and used as a control variable.Findings: A meaningful difference has been found between the performance of smoker and non-smoker groups in Go/No Go task and psychopathic traits that are smokers performed weaker in comparison with non-smokers and psychopathic traits of smokers were meaningfully higher than non-smokers. On the other hand, there was no significant difference between these two groups in their Wechsler Adult Intelligence Scale scores.Conclusion: The results have shown that smokers have higher psychopathic traits and lower behavioral inhibition when compared with their non-smoker peers. According to the results of current research, smoking can decline the cognitive functions.

Objective: This study aims to examine CA-125 and miRNAs as biomarkers in endometriosis pathophysiology and their potential roles in clinical diagnostics and prognostics. Methods:We reviewed a variety of studies, including cross-sectional, case-control, and prospective designs, examining a broad spectrum of patient demographics, clinical features, and biomarker (CA-125 and miRNA) expression levels. Results: CA-125 has been reaffirmed as a valuable biomarker in diagnosing and monitoring endometriosis, with its utility enhanced when used alongside other markers. MiRNAs have emerged as promising molecular regulators, offering new avenues for non-invasive diagnostics and a deeper understanding of the disease's pathophysiology. The integration of these biomarkers presents a potential shift towards more personalized and effective diagnostic and therapeutic strategies. Conclusion: Endometriosis presents a significant challenge in women's health, requiring innovative approaches for its management. The convergence of CA-125 and miRNA research represents a promising advance, potentially leading to more accurate diagnostics and personalized treatment. Future research should focus on standardizing methodologies, expanding study cohorts, and integrating findings into clinical practice to fully harness the potential of these biomarkers.

One of the major problems caused by repeated subcutaneous insulin injections in diabetic patients is insulin amyloidosis. Understanding the molecular mechanism of amyloid fibril formation of insulin and finding effective compounds to its inhibit or eliminate is very important and extensive research has been done on it. In this study, the anti-amyloidogenic and destabilizing effects of the pyrogallol, as a phenolic compound, on human insulin protein were investigated by CR absorbance, ThT and ANS fluorescence, FTIR spectroscopy and atomic force microscopy. According to the obtained results, the formation of amyloid fibrils at pH 2.0 and 50 °C was confirmed by CR, ThT, ANS, FTIR assays. Microscopic images also showed the twisted and long structures of amyloid fibrils. Simultaneous incubation of the protein with pyrogallol at different concentrations reduced the intensities of CR, ThT and ANS in a dose-dependent manner and no trace of fibrillar structures was observed in the microscopic images. FTIR spectroscopy also showed that the position of amide I band in the spectrum of samples containing pyrogallol was shifted. Based on the findings in this study, it can be concluded that pyrogallol can be effective in preventing and suppressing human insulin amyloid fibrils.

Technological advances such as blockchain, artificial intelligence, big data, social media, geographic information systems represent a building block of the digital transformation that supports the resilience of the food supply chain (FSC) and increases its efficiency. This paper reviews the literature surrounding digitalization in FSCs. A bibliometric and key-route main path analysis was carried out to objectively and analytically uncover the knowledge development in digitalization within the context of sustainable FSCs. The research began with the selection of 2140 articles published nearly over five decades. Then, the articles were examined according to several bibliometric metrics such as year of publication, countries, institutions, sources, authors, and keywords frequency. A keyword co-occurrence network was generated to cluster the relevant literature. Findings of the review and bibliometric analysis indicate that research at the intersection of technology and the FSC has gained substantial interest from scholars. On the basis of keyword co-occurrence network, the literature is focused on the role of information communication technology for agriculture and food security, food waste and circular economy, and the merge of the Internet of Things and blockchain in the FSC. The analysis of the key-route main path uncovers three critical periods marking the development of technology-enabled FSCs. The study offers scholars a better understanding of digitalization within the agri-food industry and the current knowledge gaps for future research. Practitioners may find the review useful to remain ahead of the latest discussions of technology-enabled FSCs. To the authors’ best knowledge, the current study is one of the few endeavors to explore technology-enabled FSCs using a comprehensive sample of journals articles published during the past five decades.

An in-depth study of the failure of granular materials, which is known as a mechanism to generate defects, can reveal the facts about the origin of the imperfections such as cracks in the carbon anodes. The initiation and propagation of the cracks in the carbon anode, especially the horizontal cracks below the stub-holes, reduce the anode efficiency during the electrolysis process. In order to avoid the formation of cracks in the carbon anodes, the failure analysis of coke aggregates can be employed to determine the appropriate recipe and operating conditions. In this paper, it will be shown that a particular failure mode can be responsible for the crack generation in the carbon anodes. The second-order work criterion is employed to analyze the failure of the coke aggregate specimens and the relationships between the second-order work, the kinetic energy, and the instability of the granular material are investigated. In addition, the coke aggregates are modeled by exploiting the discrete element method (DEM) to reveal the micro-mechanical behavior of the dry coke aggregates during the compaction process. The optimal number of particles required for the failure analysis in the DEM simulations is determined. The effects of the confining pressure and the strain rate as two important compaction process parameters on the failure are studied. The results reveal that increasing the confining pressure enhances the probability of the diffusing mode of the failure in the specimen. On the other hand, the increase of strain rate augments the chance of the strain localization mode of the failure in the specimen.

Background and Aim: Cancer is a disease characterized by uncontrolled cell growth and invasion of tissues. It seems that personality differences and psychological factors are important factors that lead to different reactions to cancer. Therefore, the main purpose of the present study was to investigate the relationship between type D, stress level of life events, personality traits, and anxiety sensitivity in people with breast cancer attending to Tehran Bu-ali Hospital. Methods: The study was a correlational study in which 100 cancer patients referred to Bu-ali Hospital in Tehran, selected by the available sampling method from April to June 2018. The tools used included the Denollet DS-14 Type D Questionnaire, the Paykel Life events Questionnaire, the Eysenck Personality Questionnaire, the ASI Anxiety Scale, Floyd et al., Data analysis in this study is taken place by using SPSS software, two descriptive levels (percentage, frequency, etc.) and regression. Results: The study results showed that there is a relationship between type D personality with stress of life events, neurosis, extraversion, and psychopath dimensions of personality and anxiety sensitivity in breast cancer patients. Conclusion: Psychological factors play a role in the incidence and exacerbation of breast cancer, and ultimately patients with personality type D and personality traits such as psychosis and high anxiety sensitivity and more stress of life events show more symptoms.

An expansion method based on time fractional Sine-Gordon equation is implemented to construct some real and complex valued exact solutions to the Korteweg-de Vries and modified Korteweg-de Vries equation in time fractional forms. Compatible fractional traveling wave transform plays a key role to be able to apply homogeneous balance technique to set the predicted solution. The relation between trigonometric and hyperbolic functions based on fractional Sine-Gordon equation allows to form the exact solutions with multiplication of powers of hyperbolic functions.

Manufacturing environments, characterized by rapid, unpredictable changes, uncertainties, risks, and uncontrollable fluctuations, pose significant challenges to minimizing disruptions in processes. This study introduces an innovative approach that prioritizes curbing risk propagation among processes to enhance robustness. It emphasizes the integration of engineering management principles and modular design within manufacturing. Adopting a system engineering perspective, all manufacturing process activities are viewed as interrelated components within a unified system. By employing Axiomatic Design (AD) theory and the Design Structure Matrix (DSM) method, manufacturing process architecture is modularized, yielding heightened robustness. The proposed mathematical model equips engineering and manufacturing managers with a potent tool for designing robust processes while adeptly managing system complexity. The study's outcomes underscore a substantial enhancement in modularization, leading to elevated overall robustness in manufacturing processes. To validate the methodology, the architectural design of manufacturing processes is examined in a real-case scenario, specifically the Barez Industrial Group in Iran. This verification substantiates the 'manufacturing processes' of the case, presenting an optimally modularized architecture. The results affirm the proposed approach's efficacy, demonstrating improved modularization that contributes to bolstered robustness in manufacturing processes.

CO2 injection into geological formations is considered one way of mitigating the increasing levels of carbon dioxide concentrations in the atmosphere and its effect on and global warming. In regard to sequestering carbon underground, different countries have conducted projects at commercial scale or pilot scale and some have plans to develop potential formations for carbon dioxide storage. In this study, pure CO2 injection is examined on a model with the properties of bunter sandstone and then sensitivity analyses were conducted for some of the important parameters. The results of this study show that the extent to which CO2 has been convected in the porous media in the reservoir plays a vital role in improving the CO2 dissolution in brine and safety of its long term storage. We conclude that heterogeneity plays a crucial role on the saturation distribution and can increase or decrease the amount of dissolved CO2 in water. Furthermore, the value of absolute permeability controls the effect of the Kv/Kh ratio on the CO2 dissolution in brine. In other words, as the value of vertical and horizontal permeability decreases (i.e. tight reservoirs) the impact of Kv/Kh ratio on the dissolved CO2 in brine becomes more prominent. Additionally, reservoir engineering parameters, such as well location, injection rate and scenarios, also have a high impact on the amount of dissolved CO2.

Olive fruits at different ripening stages give rise to various table olive products and oil qualities. Therefore, developing an efficient method for recognizing and sorting olive fruits based on their ripening stages can greatly facilitate postharvest processing. This study introduces an automatic computer vision system that utilizes deep learning technology to classify the `Roghani` Iranian olive cultivar into five ripening stages using color images. The developed model employs convolutional neural networks (CNN) and transfer learning based on the Xception architecture and ImageNet weights as the base network. The model was fine-tuned by testing multiple configurations of well-known CNN layers. To minimize overfitting and enhance model generality, data augmentation techniques were employed. By considering different optimizers and two image sizes, four final candidate models were generated. These models were then compared in terms of loss and accuracy on the test dataset, classification performance (classification report and confusion matrix), and generality. All four candidates exhibited high accuracies ranging from 86.93% to 93.46% and comparable classification performance. In all models, at least one class was recognized with 100% accuracy. However, by taking into account the risk of overfitting, two models were discarded. Finally, a model with an image size of 224 × 224 and an SGD optimizer, which had a loss of 1.23 and an accuracy of 86.93%, was selected as the preferred option. The results of this study offer robust tools for automatic olive sorting systems, simplifying the differentiation of olives at various ripening levels for different post-harvest products.

In this paper, we demonstrate a useful interaction between the theory of clique partitions, edge clique covers of a graph, and the spectra of graphs. Using a clique partition and an edge clique cover of a graph we introduce the notion of a vertex-clique incidence matrix for a graph and produce new lower bounds for the negative eigenvalues and negative inertia of a graph. Moreover, utilizing these vertex-clique incidence matrices, we generalize several notions such as the signless Laplacian matrix, and develop bounds on the incidence energy and the signless Laplacian energy of the graph. %The tight upper bounds for the energies of a graph and its line graph are given. More generally, we also consider the set $S(G)$ of all real-valued symmetric matrices whose off-diagonal entries are nonzero precisely when the corresponding vertices of the graph are adjacent. An important parameter in this setting is $q(G)$, and is defined to be the minimum number of distinct eigenvalues over all matrices in $S(G)$. For a given graph $G$ the concept of a vertex-clique incidence matrix associated with an edge clique cover is applied to establish several classes of graphs with $q(G)=2$.

COVID-19 is a severe global problem, and AI can play a significant role in preventing losses by monitoring and detecting infected persons in early-stage. This paper aims to propose a high-speed and accurate fully-automated method to detect COVID-19 from the patient's CT scan images. We introduce a new dataset that contains 48260 CT scan images from 282 normal persons and 15589 images from 95 patients with COVID-19 infections. At the first stage, this system runs our proposed image processing algorithm to discard those CT images that inside the lung is not properly visible in them. This action helps to reduce the processing time and false detections. At the next stage, we introduce a novel method for increasing the classification accuracy of convolutional networks. We implemented our method using the ResNet50V2 network and a modified feature pyramid network alongside our designed architecture for classifying the selected CT images into COVID-19 or normal with higher accuracy than other models. After running these two phases, the system determines the condition of the patient using a selected threshold. We are the first to evaluate our system in two different ways. In the single image classification stage, our model achieved 98.49% accuracy on more than 7996 test images. At the patient identification phase, the system correctly identified almost 234 of 245 patients with high speed. We also investigate the classified images with the Grad-CAM algorithm to indicate the area of infections in images and evaluate our model classification correctness.

Introduction: Circulating tumor DNA (ctDNA) is newly diagnosed tumor DNA that can easily represent a tumor’s genetic and epigenetic change. Pheochromocytomas (PCCs) and Paragangliomas (PGLs) are rare tumors of adrenal gland tissue that have the potential to be detected by ctDNA. We aimed to study the potential of the methylation status of RDBP, SDHB, and SDHC genes in ctDNA of PCCs/PGLs patients as a diagnostic biomarker. Materials and Methods: Clinical data, fresh frozen tissue, the blood of 12 PCCs/PGL patients, and the blood of 12 age/sex-matched normal patients were collected. The methylation status of RDBP, SDHB, and SDHC was compared between cases and controls by MS-HRM analysis. Results: Amongst six promoter regions of RDBP, SDHB, and SDHC, promoter methylation quantification of SDHCa and RDBPb was significantly different between PCCs/PGLs and controls. SDHCa was methylated in 49.93% of PCCs/PGLs cases vs. 8.33 % of control samples, p-value: 0.026, area under curve AUC=0.757, and RDBPb in 74.9% of PCCs/PGLs cases vs. 25.0% of control samples, p-value: 0.032, AUC=0.750. Conclusions: This study suggests the ctDNA potential for a less invasive source of tumor epigenetic modification in PCCs/PGLs malignancies. The SDHCa and RDBPb hypermethylation warrant further exploration as diagnostic tools for PCCs/PGLs.

The increasing global demand for energy and the pressing challenge of environmental pollution necessitates a paradigm shift towards sustainable energy sources. Hydrogen, a viable renewable energy carrier, has the potential to substantially alleviate these concerns. This review offers a comprehensive exploration of the technologies imperative to the production and operation of fuel cell vehicles (FCVs), ranging from various fuel cell types, hydrogen storage methods, fueling station logistics, batteries in hydrogen vehicles, and the emerging influence of artificial intelligence and quantum computing. An analytical overview of global adoption patterns reveals significant geographical disparities, with the United States and South Korea at the forefront of FCV integration, primarily in the form of passenger cars, followed by buses and trucks. Asia emerges as the region with the highest proportion of FCVs. This paper also delves into the diverse challenges facing FCV implementation, shedding light on the essential role of continued investment in the evolution of sustainable transportation systems. Furthermore, it provides insights into the varying contributions of different companies in the field, demonstrating the collective effort required to advance this promising technology. The comprehensive exploration provided in this review aids in understanding the opportunities, challenges, and potential of hydrogen as an integral player in the future of sustainable transportation. The increasing need for energy carriers and the rise of environmental pollution have driven the exploration of renewable energy sources, with hydrogen being a promising option.

We have implemented quantum modeling mainly based on Bohmian Mechanics to study time series that contain strong coupling between their events. Compared to time series with normal densities, such time series are associated with rare events. Hence, employing Gaussian statistics drastically underestimates the occurrence of their rare events. The central objective of this study is to investigate the effects of rare events in the probability densities of time series from the point of view of quantum measurements. For this purpose, we first model the non-Gaussian behavior of time series using the multifractal random walk (MRW) approach. Then, we examine the role of the key parameter of MRW, λ, which controls the degree of non-Gaussianity, in quantum potentials derived for time series. Our Bohmian quantum analysis shows that the derived potential takes some negative values in high frequencies (its mean values), then substantially increases, and the value drops again for rare events. Thus, rare events can generate a potential barrier in the high-frequency region of the quantum potential, and the effect of such a barrier becomes prominent when the system transverses it. Finally, as an example of applying quantum potential beyond the microscopic world, we compute quantum potentials for the S&amp;P financial market time series to verify the presence of rare events in the non-Gaussian densities and demonstrate deviation from the Gaussian case.

Acid fracturing simulation is used widely to optimize carbonate reservoirs and improve acid fracturing treatment performance. In this study, a method was used to minimize the risk of the acid fracturing treatment. First, optimal fracture geometry parameters with UFD methods are calculated. After that, design components change as long as fracture geometry parameters reach their optimal values. The results showed a high flow rate needed to achieve optimal fracture geometry parameters with increasing acid volume. Sensitivity analysis was performed on controllable and reservoir parameters. It observed that a high flow rate should be applied for a low fluid viscosity to achieve the optimization goals. Straight acid reaches optimal conditions at a high flow rate and low volume. These conditions for retarded acids appear only at a low flow rate and high volume. The study of the acid concentration for gelled acid showed that as it increased, the flow rate and volume increased. Besides, for low permeability formation, a large fracture half-length and small fracture width are desirable. In this case, a higher flow rate will be required. The sensitivity analysis showed that the optimum flow rate and acid volume increase and decrease for the high Young's modulus. The effect of closure stress was also investigated and observed for a sample with high closure stress, low flow rate, and high acid volume are required.

The regulatory mechanism of PCSK7 gene is still unknown, although its encoded protein PC7 is the most ancient and highly conserved of all proprotein convertases and exhibits enzymatic and non-enzymatic functions in liver triglyceride regulation. Bioinformatics algorithms were used to predict regulatory microRNAs (miRNAs) of PCSK7 expression. This led to the identification of 4 miRNAs, namely miR-125a-5p, miR-143-3p, miR-409-3p, and miR-320a-3p, with potential binding sites on the 3’-untranslated region (3′-UTR) of human PCSK7 mRNA. The expression patterns of these miRNAs and PCSK7 mRNA were assessed in three different cell lines with quantitative polymerase chain reaction (qPCR), which revealed reciprocal expression patterns between the expression levels of the four selected miRNAs and PCSK7. Next, the interactions and effects of these miRNAs on PCSK7 expression levels were investigated via cell-based expression analysis, dual-luciferase assay, and Western blot analysis. The data revealed that PCSK7 mRNA levels decreased in cells transfected with vectors overexpressing miR-125a-5p, miR-143-3p, and miR-409-3p, but not miR-320a-3p. The dual-luciferase assay demonstrated that the above 3 miRNAs could directly interact with putative target sites in PCSK7 3′-UTR and regulate its expression, whereas miR-320-3p exhibited no interaction. Western blot analysis further revealed that overexpression of miR-125a-5p in Huh7 cells inhibits the expression and ability of PC7 to cleave human transferrin receptor 1. Our results support a regulatory role of these miRNAs in PCSK7 expression and function and opens the way to assess their roles in the regulation of PC7 activity in vivo in the development of hepatic steatosis.

For many years, energy monitoring at the most disaggregate level has been mainly sought through the idea of Non-Intrusive Load Monitoring (NILM). Nevertheless, a practical application of this concept in the residential sector should address the underlying concerns raised by the technical specifications of case studies. From one side, such an operation must handle common matters related to the essence of any NILM system. Although this aspect has been thoroughly investigated by basic research, it is limited to the properties of public datasets. On the other side, it must deal with specific concerns corresponding to uncommon situations. These circumstances impose further restrictions on existent NILM schemes, however, they have been overlooked due to the lack of pertinent databases to scrutinize. Accordingly, this paper presents applied research on a potential solution to NILM for Quebec residences. It carries out a relevant investigation into the multi-faceted nature of this problem in order to reveal barriers to feasible implementations in the context of Quebec. This work commences with a concise discussion about the NILM idea to highlight its essential requirements for a fruitful practice. Afterward, it provides a comparative statistical analysis to represent the specificity and potential challenges of the case study in accordance with NILM necessities. For this purpose, the examination exploits data from real-world measurement systems in the same and European regions. Subsequently, this study focuses on a load identification exercise by proposing a combinatory approach that utilizes the promise of sub-meter smart technologies to integrate the intrusive aspect of load monitoring with the non-intrusive one. The former is aimed at extracting overall heating demand from the aggregate one by a supervised procedure based on Deep Learning (DL) models while the latter is designed for disaggregating the residual load through an unsupervised process on the basis of clustering techniques. The results demonstrate that geographically-dependent cases create electricity consumption scenarios under which existing NILM methods can be questioned. From a realistic standpoint, this research elaborates on critical remarks to realize viable NILM systems, particularly, in Quebec houses.

New exact solutions to conformable time fractional EW and modified EW equations are constructed by using Sine-Gordon expansion approach. The fractional traveling wave transform and homogeneous balance have significant roles in the solution procedure. The predicted solution is of the form of some finite series of multiplication of powers of cos and sin functions. The relation among trigonometric and hyperbolic functions in sense of Sine-Gordon expansion gives opportunity to construct the solutions in terms of hyperbolic functions.

The Sine-Gordon expansion method is implemented to construct exact solutions some conformable time fractional equations in Regularized Long Wave(RLW)-class. Compatible wave transform reduces the governing equation to classical ordinary differential equation. The homogeneous balance procedure gives the order of the predicted polynomial-type solution that is inspired from well-known Sine-Gordon equation. The substitution of this solution follows the previous step. Equating the coefficients of the powers of predicted solution leads a system of algebraic equations. The solution of resultant system for coefficients gives the necessary relations among the parameters and the coefficients to be able construct the solutions. Some solutions are simulated for some particular choices of parameters.

Abstract: 1) Background: The present study aimed to examine the effect of the instructional intervention in family caregivers’ perceived threat of stroke patients’ dependency risk. 2) Methods: This was a randomized controlled clinical trial in which two patient and family caregiver groups of 45 were randomly divided into intervention and control groups based on the inclusion/exclusion criteria. Instructional intervention for family caregivers in the intervention group was in the form of four one-hour sessions. The data were collected before and immediately after instructional intervention at the hospital as well as two weeks and two months following the intervention via postal service. The data analysis was done using SPSS ver.22. 3) Results: The pre-intervention family caregivers’ perceived threat was not significantly different in the two groups (P = 0.591). However, the family caregivers’ perceived threat of the intervention group increased after the intervention compared with the control group (P < 0.001). In addition, the family caregivers’ perceived threat of the intervention group was significantly different in all post instructional intervention stages compared with pre-intervention (P < 0.001), whereas no such difference was observed in the control group (p = 0.245). 4) Conclusions: It is recommended that stroke patients' caregivers be provided with instructional programs to enhance their understanding of patient dependency risks and challenges.

This work is related to the environmental toxicology risk assessment and evaluation of possible transformation of carbon-based nanomaterials (CNMs) after the contact with marine microalgae. The materials used in the study represent common and widely applied multiwalled carbon nanotubes (CNTs), fullerene (C60), graphene (Gr), and graphene oxide (GrO). The toxicity was evaluated as growth rate inhibition, esterase activity, membrane potential, and reactive oxygen species generation changes. The measurement was performed with flow cytometry after 3, 24, 96 h, and 7 days. Biotransformation of nanomaterials were evaluated after 7 days of microalgae cultivation with CNMs by FTIR and Raman spectroscopy. The calculated toxic level (EC50 in mg/L, 96 h) of ued CNMs reduced in the following order: CNTs (18.98) &gt; GrO (76.77) &gt; Gr (159.40) &gt; C60 (414.0). Oxidative stress and membrane depolarization was the main toxic action of CNTs and GrO. At the same time, Gr and C60 decreased the toxic action with time and had no negative impact on microalgae even at concentration of 125 mg/L. Moreover, C60 and Gr after seven days of the contact with microalgae cells obtained structural deformations.

The high figure of merit and earth abundance of Cu₁₂Sb₄S₁₃ thermoelectric ma- terials have recently attracted many attentions toward these type of complex compounds. Intrinsic low thermal conductivity, as well as tunable electronic transport properties, make them suitable for thermoelectric power generation. In this study, we perform a comparative theoretical study on the substituted compounds, primarily at the Cu site including known tetrahedrite Cu₁₂Sb₄S₁₃, by means of first-principles calculations. The density functional theory of electric structure is applied to investigate the result of substitution.

Renewable jet fuel (RJF) production has been recognized as a promising approach for reducing the aviation sector's carbon footprint. Over the last decade, commercial production of RJF has piqued the interest of airlines and governments around the world. However, RJF production can be challenging due to its dispersed supply resources. Furthermore, the production of RJF is more costly compared to producing conventional jet fuel. In this study, using a mixed integer linear program (MILP), we design an RJF supply chain network in which we obtain an optimized configuration of the supply chain and determine operational decisions required to meet RJF demand at airports. To accelerate commercialization of RJF production, we considered four different monetary incentive programs, which could cover the supply chain’s costs. This study is validated by employing the model to design an RJF supply chain in the Midwestern US. Results from this study are promising as they show the supply chain can achieve commercialization with partial financial coverage from the incentive programs. Based on the findings of this study, policymakers can devise policies to commercialize RJF production and accelerate its adoption by industry.

The agricultural sector faces challenges due to climate change and the growing global population. Alkaline stress could adversely impact plant growth and crop production. This stressor diminishes water quality essential for crop cultivation, consequently impairing plant growth and overall productivity. Gamma-aminobutyric acid (GABA), a non-protein amino acid, may exhibit multifaceted roles in plant responses to adverse environmental conditions. Optimization of crop production in controlled environmental agriculture under artificial light attracted much attention. In the present study, we investigated the effects of different light spectra and GABA concentrations on Lollo Rosso lettuce plants under alkaline stress. Seedlings were placed under different light spectra [red (R), blue (B), white (W), 3R:1B, and 2R:1B:1far-red (FR)] and treated by GABA (0 and 50 µmol). Alkaline conditions were instituted by applying NaHCO3 at a concentration of 40 mM. The experiment incorporated a control treatment without NaHCO3. In general, R light exposure caused the highest growth performance of lettuce plants. GABA augmented biomass production in control and alkaline-treated plants across all light spectra. Additionally, it increased the concentrations of photosynthetic and protective pigments under alkaline conditions. GABA also improved the photosynthetic performance under all light spectra. Non-photochemical quenching and pigmentation were enhanced by exposure to B light, especially in plants treated with GABA. Alkaline stress induced an increase in soluble carbohydrate content in the lettuce leaves. These findings highlight the support of GABA application in facilitating coping plants to alkaline stress.

The growing production and application of carbon-based nanomaterials (CNMs) represent possible risks for aquatic systems. However, the variety of CNMs with different physical and chemical properties, and different morphology complicated the understanding of their potential toxicity. This paper aims to evaluate and compare the toxic impact of four most common CNMs, namely multiwalled carbon nanotubes (CNTs), fullerene (C60), graphene (Gr), and graphene oxide (GrO) in marine microalgae Porphyridium purpureum. The microalgae cells were exposed to the CNMs for 96 h and measured by flow cytometry. Based on the obtained results, we determined no observed effect level (NOEL), calculated EC10 and EC50 concentrations for growth rate inhibition, esterase activity, membrane potential, and reactive oxygen species (ROS) generation changes for each tested CNMs. According to the sensitivity (growth rate inhibition) of P. purpureum, the used CNMs can be listed in following order: CNTs &gt; GrO &gt; Gr &gt; C60. The toxicity of CNTs was significantly higher than the toxic effect of the other used CNMs and only this sample caused increase of ROS generation in microalgae cells. This effect caused by trace metal residuals in CNTs and high affinity between particles and microalgae associated with the presence of exopolysaccharide coverage on P. purpureum cells.

Studying Active Transportation (AT) is widespread in America and Europe's research and stud-ies that include Latent variables (LV) are growing to identify exact results of finding what to do to increase the utility of AT. LVs help us to have more accurate research. LVs are defined as psy-chological factors like feeling safe while you ride at night and thus they are not subjective and hard to understand but very important to increase the utility of using AT modes. In this study, most of the previous studies about bicycling have been reviewed. In this research, different var-iables including subjective and LVs are conducted for maximizing the use of bicycle utility and introduced to have better sight for future researchers to deal with modeling AT mode choice. Results represent the importance of having 'will' for using a bicycle, especially in difficult situa-tions and cultural barriers that affect the cycling of women.

Population growth and increasing global demand for freshwater have raised a serious challenge for the depleting sources of freshwater in the 21st century. Desalination technologies can be a reliable technique for providing freshwater. Capacitive deionization is one of the innovative desalination methods that has received increasing interest. Flow-electrode capacitive deionization (FCDI) (a new architecture of capacitive deionization) is one of the efficient, cost-effective, and environmentally-friendly desalination methods for freshwater production. In this experimental research, the performance of an FCDI system was investigated and the influence of important parameters such as flow rate of flow-electrodes, electrolyte salt concentration of flow-electrodes, and initial feed water concentration will be assessed on the efficiency of desalination operation. In this study, the flow-electrodes operated in short-circuited closed-cycle operation (SCC) mode, and also the feed water operated similarly to the flow-electrodes in closed-cycle. Moreover, in all the experiments, the salt adsorption capacity (SAC) and salt removal efficiency (SRE) was calculated. Herein, by optimizing the above mentioned parameters, the salt removal efficiency of 83% and a SAC value of 29.12 mg/g dry carbon were achieved in 5 hours.

Flood routing in flood forecasting issue, calculation the height of flood bands, determining the river boundaries, and estimation of protective facilities for flood –exposed building is applicable. In many cases, due to the lack of measuring stations, the status of the upstream flood generating hydrograph is not known. The purpose of this study is to present an integrated method comprising of an optimization model and a hydrodynamic numerical model for flood modeling to determine the upstream hydrograph using the provided hydrograph at the downstream measuring station of a river. The routing procedure consists of three steps: (1) generating a hypothetical upstream hydrograph using genetic algorithm method; (2) hydrodynamic modeling using a numerical simulation model for flood routing according to the hypothetical hydrograph which is generated in the first step; (3) compare the calculated and observed hydrograph in downstream by using a fitness function. This recommended procedure was named as Reverse Flood Routing Method (RFRM) and was then applied to Karun River, the largest river in Iran. Comparing the generated upstream hydrograph by the RFRM model with the corresponding measured hydrograph at Ahvaz hydrometric station, as an ungauged river location, shows the high accuracy of the recommended model in this study.

The construction industry is one of the most fatal industries, so it is important to pay more attention to safety solutions. Even though work-related accidents are known as major waste in construction projects, little attention has been paid so far to incorporating safety into the lean construction framework. In this research, lean construction theory is reviewed through the lens of safety. That being so, the identified challenges in previous research on improving safety in construction projects are categorized and those related to the concept of lean project delivery are introduced. Then, the principles of the lean construction framework are explained and the relevant changes for incorporating safety into the framework are introduced and discussed. It is expected that this hybrid model would further enrich the lean construction framework. The careful attention of project executives to this model may improve the safety situation in construction projects.

Malaysian healthcare institutions still use ineffective paper-based vaccination systems to manage childhood immunization schedules. This may lead to missed appointments, incomplete vaccinations, and outbreaks of preventable diseases among infants. To address this issue, we proposed a text messaging vaccination reminder and recall system named Virtual Health Connect (VHC) to simplify and accelerate the immunization administration for nurses that may result in improving the completion and timeliness of immunizations among infants. Considering the narrow research about the acceptance of these systems in the healthcare sector, we examined factors influencing nurses’ attitude and intention to use VHC using the extended technology acceptance model (TAM). The novelty of the conceptual model is proposing new predictors of attitude, namely, perceived compatibility and perceived privacy and security issues. We conducted a survey among 121 nurses in Malaysian government hospitals and clinics to test the model. We analyzed the collected data using partial least squares-structural equation modeling (PLS-SEM) to examine the significant factors influencing nurses’ attitude and intention to use VHC. Moreover, we applied artificial neural network (ANN) to determine the most significant factors of acceptance with higher accuracy. Therefore, we could offer more accurate insights to decision-makers in the healthcare sector for the advancement of health services. Our results highlighted that the compatibility of VHC with the current work setting of nurses developed their positive perspectives toward the system. Moreover, the nurses felt optimistic about the system when considering it to be useful and easy to use in the workplace. Finally, their attitude toward using VHC played a pivotal role in raising their intention. Based on the ANN models, we also found that perceived compatibility was the most significant factor influencing nurses' attitude towards using VHC, followed by perceived ease of use and perceived usefulness.

Energy storage systems (ESSs) are the key elements to improve the operation of power systems. On the other hand, these elements challenge the power system planners. The difficulties arise as a result of the ESSs' economic and technological features. The cycle life of ESSs is a critical aspect that influences the choices made during expansion planning processes. In this manuscript, we have focused on a new model for the expansion planning of ESSs considering the impacts of technical properties, such as the cycle life and depth of discharge. For this purpose, the proposed model consists of the hourly operation planning of ESSs in the sample days of year. A new indicator is proposed to determine the daily charging/discharging cycles of ESSs. Numerical results show the ability of the proposed model to determine the optimal technology and capacity of ESSs.

Appropriate estimation of soil settlement is of significant importance since it directly influences the performance of building and infrastructures that are built on soil. In particular, the settlement of fine-grained soils is critical because of low permeability and continuous settlement with time. Coefficient of consolidation (C_c) is a key parameter to estimate settlement of fine-grained soil layers. However, estimation of this parameter is time consuming, needs skilled technicians, and specific equipment. In this study, C_c was estimated using several soil parameters such as liquid limit (LL), plastic limit (PL), and initial void ratio (e₀). Estimating such parameters in laboratory is straight forward and needs substantially less time and cost compared to conventional tests to estimate C_c such as oedometer test. This study presents a novel prediction model for C_c of fine-grained soils using gene-expression programming (GEP). GEP is a biologically inspired technique capable of offering closed-form solution for the optimal solution. A database consisted of 108 different data points was used to develop the model. A closed-form equation solution was derived to estimate C_c based on LL, PL, and e₀. The performance of developed GEP-based model was evaluated through coefficient of determination (R²), root mean squared error (RMSE), and mean average error (MAE). High R² and low error values indicated the descent performance of the model. Furthermore, the model was evaluated using the additional performance measures and met all the suggested criteria. Furthermore, the model had a better performance in terms of R², RMSE, and MAE compared to most of existing models. It is expected that the developed model will decrease the time and cost associate with determining C_c of fine-grained soils.Keywords: evolutionary model, gene-expression programming (GEP), prediction, soil compression index, estimation, soil engineering, soil informatics, civil engineering, machine learning, data science, big data, soft computing, deep learning, forecasting, subject classification codes, construction informatics, computational intelligence (CI), artificial intelligence (AI), estimation

As 180-degree meanders are observed in abundance in nature, a meandering channel with two consecutive 180-degree bends was designed and constructed to investigate bed topography variations. These two 180-degree mild bends are located between two upstream and downstream straight paths. In this study, different mean velocity to critical velocity ratios have been tested at the upstream straight path to determine the meander's incipient motion. To this end, bed topography variations along the meander and the downstream straight path were addressed for different mean velocity to critical velocity ratios. In addition, the upstream bend's effect on the downstream bend has been investigated. Results indicated that the maximum scour depth at the downstream bend has increased as a result of changing the mean velocity to critical velocity ratio from 0.8 to 0.84, 0.86, 0.89, 0.92, 0.95, and 0.98 by respectively 1.5, 2.5, 5, 10, 12, and 26 times. Moreover, increasing the ratio increased the maximum sedimentary height by 3, 10, 23, 48, 49, and 56 times. The upstream bend's incipient motion was observed for the mean velocity to critical velocity ratio of 0.89, while the downstream bend was equal to 0.78.

This study presents the consecutive modification of orange peel (OP) by NaOH and sodium dodecyl sulfate (SDS) for simultaneous elimination of basic dyes from the binary system and modeling the adsorption process using an intelligent tool. The natural and modified biosorbents were characterized by variety of analyses such as: field emission scanning electron microscopy with energy dispersive X-ray, N2 physisorption and Fourier transform infrared spectroscopy techniques. The influence of various variables on dye removal like pH, the quantity of biosorbents, dyes concentration, contact time, and temperature in the binary system were investigated and optimized by an artificial neural network (ANN) model as an intelligent tool. The optimum quantity of the sorbent was found to be 0.30 g for orange peel (OP) and 0.25 g for NaOH-treated OP (NOP) and SDS-decorated NOP (SNOP) at pH = 7. The kinetics and thermodynamics investigations showed that the removal of dyes obeyed the pseudo-second-order kinetic model and were spontaneous and exothermic in nature. Moreover, in order to describe the mechanism of sorption process, desorption studies of dyes were carried out. The desorption percentages of methylene blue (MB) in water and HCl were found to be in the range of 1.93%–4.76% and 18.87%–28.76%, respectively; in addition, the desorption percentages of crystal violet (CV) in water and HCl were obtained to be in the range of 4.11%–7.41% and 32.84%–43.00%, respectively; which could be a recommendation ion exchange or electrostatic attachment of dyes onto biosorbents. The ANN predictions matched with the experimental data very well (0.95308 < R2 < 0.99191 and 0.98335 < R2 < 0.99773 for MB and CV, respectively) which indicated high accuracy of the ANN model. In addition, the relative importance of each parameter was calculated by Garson’s equation.

Background and Objective: Intimate relationships hold significant importance during emerging adulthood. This study aimed to investigate the critical determinants of perceived well-being in friendship relationships during emerging adulthood.Method: Using a quantitative approach, a sample of 726 undergraduate students from the Ferdowsi University of Mashhad were selected through convenience sampling. They completed the Interpersonal Behaviors Questionnaire (IBQ), the Compassionate and self-image goals scale (CSIGS), the Basic Need Satisfaction in Relationships Scale (BNS-RS), the Interpersonal Needs Questionnaire (INQ-10), Friendship Self-Regulation Questionnaire (SRQ-F), Interpersonal Behaviors Questionnaire-Self (IBQ-self), State Level Subjective Vitality Scale (SVS-SL), the Perceived Relationship Quality Component (PRQC), and the Basic Empathy Scale (BES). Data analysis was conducted using Partial Least Squares Structural Equation Modeling (PLS-SEM).Results: The results indicated that the critical determinants in predicting perceived well-being in friendship relationships were, in order, goals in friendship relationships, friendship self-regulation, perceived support of basic psychological needs by friends, satisfied basic psychological needs, frustrated psychological needs, and supporting the basic psychological needs of friends.Conclusion: The findings demonstrate that self-determination theory (SDT) provides a coherent framework for explaining perceived well-being in friendships.

Heart failure (HF) diagnosis, phenotyping, prognosis, and treatment decisions are all based on the left ventricular ejection fraction (EF). Heart failure with mid-range EF (HFmrEF) is a third EF category for heart failure with an EF between 40 and 49 percent. Comparatively, heart failure with preserved EF or reduced EF has been largely unexplored. 10–25% of patients with HF have HFmrEF. Although HFmrEF has an intermediate clinical profile, it is more similar to HF with reduced EF, particularly because these patients have a high incidence of ischaemic heart disease. Heart failure with preserved EF has a lower risk of cardiovascular events than heart failure with reduced EF, which is milder. HFmrEF and HF with preserved EF patients have a similar or higher risk of non-cardiovascular adverse events than patients with HF with reduced EF. There is still a great deal of mystery surrounding HFmrEF. The purpose of this review is to describe the major pathophysiology of HFmrEF and its similarities and differences with the other two types of EF. It is the purpose of this paper to present a comprehensive overview of the currently available evidence in support of the pathophysiology of patients with HFmrEF. Further investigation of the pathophysiology, treatment, and prognosis of this condition will be needed in the future in order to better understand it.

Hyperlipidemia is the fat particles excess in the serum. Hyperlipidemia increases the mortality rate that occurs with other metabolic disorders. Hyperlipidemia is classified into familial and acquired subgroups. Moreover, Hyperlipidemia etiology is based on environmental or genetic factors. For instance, abnormal HMG-CoA regulation down-regulates ubiquitin ligase and targets variable oxidative stress-related condition proteins. There has been proven reactive oxygen species (ROS) overshoot happens during hyperlipidemia occurrence. OS, directly and indirectly, regulates molecular cascades within the cell and leads to gene expression alteration. At this molecular juncture, AMPK is affected by ROS. AMPK is a serine-threonine kinase and a critical energy balance. Low energy conditions result in AMPK activation due to the down-regulation of protein and lipid synthesis. Furthermore, ER stress and activated unfolded protein proteasomal response and autophagy are AMPK mediated. Polyphenols are widespread dietary plant-based compounds that regulate gene expression and signal conduction. Through the hyperlipidemic state, FFAs releasing indirectly connect to AMPK/NF-κB pathway then polyphenols target them. AMPK, during this FFA exposure, down-regulates de novo lipid molecules generation. Likewise, if AMPK/mTOR pathway failure is prolonged, the hyperlipidemic state may be explicit, activated by natural herbal mediators, e.g., polyphenols. Polyphenols activate the AMPK signaling pathway and influence lipid metabolism. Polyphenol-mediated AMPK activation results in lipogenesis inhibition and lipophagy. Cholesterol efflux mediated polyphenols lipid-lowering effects, accessing LXR pathway. All these clues persist on direct or indirect AMPK-related polyphenolic anti-hyperlipidemic effects.

In this paper, the effect of preheating on the mechanical properties and micro structure of similar friction stir welded AA6061 aluminum alloys sheets was investigated. Aluminum alloy 6061 sheets with a thickness of 5 mm and threaded cylindrical pins were used. Rotation and traverse speeds were 1200 rpm and 75 mm/min, respectively. The results of tensile tests performed on the welded samples showed that compared to the non-preheated samples, preheating had increased the strength and elongation of the joints by 58% and 46%, respectively. In the present study, during the welding process preheating cause emerged heat with lower slope from stir zone. This phenomenon may result in Increase the deformation resistance of material and consequently decrease of grain size. This grain refinement can improve the mechanical properties of welds. Accordingly, hardness and strength of the material will be increased.

In the current study, the failure behavior of retrofitted steel structures was studied experimentally and theoretically with steel/CFRP double strap joints (DSJs) under quasi-static tensile loading. A series of DSJs with different bonding lengths are also considered and examined to experimentally assess the effective bond length. To predict the failure load values of the tested specimens, a new stress-based criterion, namely the point stress (PS) criterion is proposed. Although some theoretical predictive modelling for the strength between steel/CFRP joints under various loading conditions has been presented, in this work by using the new proposed approach, one can calculate rapidly and conveniently the failure loads of the steel/CFRP specimens. Furthermore, to assess the validity of the new proposed criterion, further experimental data on steel/CFRP DSJs available in the open literature are predicted using the PS criterion. Finally, it was found that a good agreement exists between the experimental results and the theoretical predictions based on the PS criterion.

P-band radar remote sensing applied during the Airborne Microwave Observatory of Subcanopy and Subsurface (AirMOSS) mission has shown great potential for estimation of root zone soil moisture. When retrieving the soil moisture profile (SMP) from P-band radar, a mathematical function describing the vertical moisture distribution is required. Because only a limited number of observations are available, the number of free parameters of the mathematical model must not exceed the number of observed data. For example, a second order polynomial that contains 3 free parameters was presumed based on in-situ SMP data. The polynomial is currently parameterized based on 3 backscatter observations provided by AirMOSS (i.e. one frequency at three polarizations of HH, VV and HV). In this paper, a more realistic, physically-based SMP model containing 3 free parameters is derived based on a solution to Richards’ equation for unsaturated flow in soils. Evaluation of the new SMP model based on both numerical simulations and measured data revealed that it exhibits greater flexibility for fitting measured and simulated SMPs than the currently applied polynomial. It is also demonstrated that the new SMP model can be reduced to a second order polynomial at the expense of fitting accuracy.

Subarachnoid hemorrhage (SAH) is most commonly seen in patients over 55 years of age and often results in a loss of many productive years. SAH has a high mortality rate, and sur-vivors often suffer from early and secondary brain injuries. Understanding the pathophysiology of the SAH is crucial to identifying potential therapeutic agents. One promising target for diagno-sis and prognosis of SAH is circulating microRNAs, which regulate gene expression and are in-volved in various physiological and pathological processes. In this review, we discuss the poten-tial of microRNAs as a target for diagnosis, treatment, and prognosis in SAH.

Background: Endocrine conditions that impact women define polycystic ovary syndrome. Previous studies have demonstrated a connection between PCOS and insulin intolerance, oxidative stress, and immune system dysfunction. Additionally, some reports have indicated that propolis has antioxidant properties and that chitosan nanoparticles have beneficial effects on the reproductive system. The goal of the present study is to compare metformin (Met) to chitosan-propolis nanoparticles and explain how they protect against a rat PCOS model caused by estradiol valerate (EV). (as a control treatment). Methods: In order to cause PCOS in rodents, a single subcutaneous injection of estradiol valerate was used, followed by a 42-day oral administration of 500 mg/kg of chitosan-propolis nanoparticles. Four sets of rats were created: the control, PCOS, metformin (PCOS and 150 mg/kg metformin), and chitosan-propolis nanoparticle (PCOS and 500 mg/kg chitosan-propolis nanoparticle) groups. The histopathological examination of the ovaries and measurement of serum ferctors were performed on all of the animals. Estradiol valerate caused PCOS, but chitosan-propolis nanoparticle therapy reversed it. Results: After chitosan-propolis nanoparticle intervention, the body weight and ovarian morphology had improved, and the serum biochemical parameters, including esretogen, progestron, vitamin D, calcium, and the insulin resistance index, had been corrected. These EV-induced changes include decreased SOD activity, elevated MDA levels, and evidence that oxidative stress was increased by EV when chitosan-propolis nanoparticle/Met were administered for 42 straight days. Additionally, certain relative mRNA transcripts, including those for the MCP, IL18, and CRP genes, were markedly upregulated in EV-treated animals. These findings unequivocally demonstrate the beneficial effects of chitosan-propolis nanoparticles/Met in inflammatory disorders. Conclustion: Together, the study's end findings, which are presented here, are consistent with the hypothesis that chitosan-propolis nanoparticle/Met offered protective activity against the harmful effects of EV. Although ameliorative effects may have been implicated, the primary pathway or pathways still need to be clarified.

This article discusses a focused study on visualizing the flow patterns in a two-phase pulsating heat pipe (PHP) using Fe₃O₄/water as the working fluid at 3 V/V% concentration. The research also aims to meticulously examine phase change phenomena in the heating section, particularly focusing on bubble formation and expansion processes. A high-speed video camera was utilized to capture dynamic insights into the behavior of the Fe₃O₄/water mixture. Based on the findings, a straightforward model was developed to explain bubble generation and growth in the mixture, serving as a useful reference for future PHP designs and optimizations. Visual observations also noted the stable nature of the Fe₃O₄/water nanofluid over a four-day period, confirming its consistency throughout the experiments. Moreover, the impact of heat load variation on the evaporator section was assessed using controlled heat inputs ranging from 10 to 80 Watts. Observations on the arrangement of slugs and plugs at a 50% filling ratio revealed interesting self-adjusting flow patterns in response to increasing heat inputs, providing valuable insights into PHP operational dynamics. Notably, the oscillatory flow behavior of Fe₃O₄/water, the chosen working fluid, exhibited greater activity in comparison to water. This distinctive flow behavior contributed to achieving heightened thermal performance efficiency for the Fe₃O₄/water system, attributed to its faster attainment of the annular flow condition.

Introduction: CT scan of the skull in patients with head trauma play an important role in identifying patients' injuries; In moderate to severe brain injury; CT scans are arguably the best way to get information about the intracranial complications of a head injury. Researchers have cited a number of reasons for why doctors are increasingly asking for CT scans of patients. In this study; pathological findings in CT scan of patients with mild cranial trauma and level of consciousness 13-15 are examined. Method: In this study, the treatment process of 445 patients who had referred to the emergency department due to skull trauma was examined as research units; and samples were taken by simple random sampling among patients for whom CT scan of the brain was requested. In this study; the reasons for requesting a CT scan of the skull from the requesting physician were questioned through an interview at the time of request. Results: According to the tables; it can be seen that most of the patients referred to the hospital due to skull trauma for CT scan were men and were discharged in less than the first 24 hours. The age group of 21 to 30 years had the highest and the age group over 70 years had the lowest frequency and the highest percentage of request for CT scan was by doctor and the biggest injury that caused patients with mild cranial trauma to go to hospital was fall. Conclusion Based on the findings of this study, cranial trauma is one of the life-threatening factors that can cause minor or severe injuries Its range varies from superficial injuries to hematoma and intracranial hemorrhage, which is a reason to perform CT scans of patients with skull trauma. In order to carefully examine the extent of the damage to the patient and to avoid possible risks and to take the necessary measures for treatment. On the other hand, the lack of clear protocols as well as the lack of clarity and certainty of physicians in their diagnoses to perform graphs of qualified people has increased the number of unnecessary CT scans

In this research, we utilize density functional theory (DFT) to study and investigate the adsorption process of methanol on three unique two-dimensional nanomaterials, namely BN, Graphene, and AlN. Eight sites for BN, AlN, and six sites for graphene were considered to reach full structural optimization. By conducting comprehensive simulations and analyses, we discovered diverse adsorption configurations and energy levels, which indicate different interaction strengths between methanol and the three 2D nanomaterials. Remarkably, AlN exhibits superior adsorption capabilities when compared to Graphene and BN which can be explained by attributable to the nature of charge transfer between the adsorbate and the adsorbent. For methanol adsorption on AlN, the strongest adsorption energy was (-0.5532 eV), and the amount of charge transferred from methanol to AlN was found to be (+0.075). For BN, the strongest adsorption energy was (-0.1351 eV), and the amount of charge transferred from methanol to BN was (+0.022). The density of states results indicated that the bandgap decreased, with a shift to the right. In contrast, for methanol adsorption on graphene, the strongest adsorption energy was found to be (-0.073 eV), and the amount of charge transferred from methanol to graphene was (+0.004). The density of states results showed no change in the bandgap. Our findings underscore the superiority of AlN’s potential over BN and Graphene for applications requiring efficient methanol adsorption, such as gas separation and storage technologies. This study emphasizes the superiority of AlN over Graphene and BN for tasks that necessitate effective methanol adsorption.

Although, promotion of urbanization culture in recent decades has made inevitable development of cities in the world, however, the development can be guided in a direction that leave, to the extent possible, minimum socioeconomic and environmental impacts. For this, it is required to first forecast auto-spreading orientation of cities and suburbs in rural areas over time and then avoid shapeless growth of cities. This paper is an attempt to develop a dynamic hybrid model based on logistic regression (LR), Markov chain (MC), and cellular automata (CA) for prediction of future urban sprawl in fast-growing cities. The model was developed using 12 widely-used urban development criteria, whose significant coefficient was determined by logistic regression, and validated by relative operating characteristic (ROC) analysis. The validated model was run in Guilan, a tourist province in northern Iran with a very high rate of urban development. For this, changes in the area of urban land use were detected over the period of 1989 to 2013 and then, future sprawl of the province was forecasted by the years 2025 and 2037. The analysis results revealed that the area of urban land use was increased by more than 1.7 % from 36012.5 ha in 1989 to 59754.8 ha in 2013, and the area of Caspian Hyrcanian forestland was reduced by 31628 ha. The results also predicted an alarming increase in the rate of urban development in the province by the years 2025 and 2037, during which urban land use is predicted to develop 0.9 % and 1.38 %, respectively. The development pattern is expected to be uneven and scattered, without following any particular direction. The development will occur close to the existing or newly-formed urban basements as well as around major roads and commercial areas. This development, if not controlled, will lead to the loss of 13863 ha of Hyrcanian forests and if the trend continues, 21013 ha of Hyrcanian forests and 20208 ha of Barren/open lands are expected to be destroyed by the year 2037. In general, the proposed model is an efficient tool for the support of urban planning decisions and facilitates the process of sustainable development of cities by providing decision-makers with an overview on future development of cities where the growth rate is very fast.

Background: Suicide is a major health problem. The aim of this study was a comparative study of the causes and methods of completed suicide referred to legal Medicine Organization in Bushehr Province during the years 2006- 2015. Methods: This consideration has been done as a retrospective cross-sectional study; the data were collected by the check list. After coordination to the medico legal 343 cases of completed suicide lead to death over a ten year period from 2006 to 2015 were extracted and the data were analyses by SPSS software. Results: The rate of completed suicide was 2.43 and 1.12 suicides per 100,000 people in male and female, respectively. The mean age were 29.25 and 27.61 years in male and female, respectively p>0.05. A higher completed suicide rate was found among single people. The most common ways of a suicide among people who live in Bushehr were hanging out 184(53.6%), self-Immolation 83(24.2%) and firearms 37(10.8%). Motive of suicide was psychological disorders, Physical disease, Conflict with family and substance abuse. 43(12.5%) people smoking and 22(6.4%) people were both smoking and opioid. During the ten year period of studied, throughout the all years that frequency of hanging out has been higher than others. Conclusion: Due to the high incidence of completed suicide in young people and unmarried individuals also hanging out in male and self-burning in females are prevalent. So determination of preventive measures appears to be necessary. Social factors such as psychological disorders and family conflicts have a noticeable role from .Bushehr people.

This research evaluates the mineral ions and their concentrations in formation water from five well samples of the Bibi Hakimeh oil field. The study reveals the presence of calcium (Ca2+), so-dium (Na+), and magnesium (Mg2+) cations, as well as sulfate (SO42-), bicarbonate (HCO3-), and chloride (Cl-) anions, which are soluble in water within the Bibi Hakimeh oil formation. Fur-thermore, mineral deposits of CaSO4, CaSO4.2H2O, CaCO3, and MgCO3 are investigated. The findings highlight the significant formation of calcium sulfate and calcium carbonate mineral deposits under the operating conditions of the Bibi Hakimeh oil well. Additionally, the study examines the interaction between rock and water of the Bibi Hakimeh formation, revealing a notable correlation between the concentration of calcium and magnesium ions and the water-rock reaction in this field

Appropriate estimation of soil settlement is of significant importance since it directly influences the performance of building and infrastructures that are built on soil. In particular, the settlement of fine-grained soils is critical because of low permeability and continuous settlement with time. Coefficient of consolidation (Cc) is a key parameter to estimate settlement of fine-grained soil layers. However, estimation of this parameter is time consuming, needs skilled technicians, and specific equipment. In this study, Cc was estimated using several soil parameters such as liquid limit (LL), plastic limit (PL), and initial void ratio (e0). Estimating such parameters in laboratory is straight forward and needs substantially less time and cost compared to conventional tests to estimate Cc such as Oedometer test. This study presents a novel prediction model for Cc of fine-grained soils using gene-expression programming (GEP). GEP is a biologically inspired technique capable of offering closed-form solution for the optimal solution. A database consisted of 108 different data points was used to develop the model. A closed-form equation solution was derived to estimate Cc based on LL, PL, and e0. The performance of developed GEP-based model was evaluated through coefficient of determination (R2), root mean squared error (RMSE), and mean average error (MAE). High R2 and low error values indicated the descent performance of the model. Furthermore, the model was evaluated using the additional performance measures and met all the suggested criteria. Furthermore, the model had a better performance in terms of R2, RMSE, and MAE compared to most of existing models. It is expected that the developed model will decrease the time and cost associate with determining Cc of fine-grained soils.