This review describes how resonance in amides is greatly affected upon substitution at nitrogen by two electronegative atoms. Nitrogen becomes strongly pyramidal and resonance stabilisation, evaluated computationally, can be reduced to as little as 50% that of N,N-dimethylacetamide. However, this occurs without significant twisting about the amide bond, which is borne out both experimentally and theoretically. In certain configurations, reduced resonance and pronounced anomeric effects between heteroatom substituents are instrumental in driving the HERON (Heteroatom Rearrangement On Nitrogen)^† reaction, in which the more electronegative atom migrates from nitrogen to the carbonyl carbon in concert with heterolysis of the amide bond, to generate acyl derivatives and heteroatom-substituted nitrenes. In other cases the anomeric effect facilitates S­_N1 and S_N2 reactivity at the amide nitrogen.

Cultural tourism in Tanzania presents a diverse tapestry of traditions, varied ethnic groups, and historical accounts. This article aims to pinpoint areas for further exploration in the cultural tourism sector of Tanzania and analyze their potential impacts. The study conducted a systematic review of the literature following established inclusion criteria as well as the Preferred Reporting Items for Systematic Reviews and meta-analysis guidelines. A total of 21 articles focused on Tanzania Cultural Heritage Tourism from sources such as Google Scholar and web databases were examined, revealing several research gaps, including theoretical, contextual and methodological aspects. Furthermore, the research offers insights into theoretical implications and recommends avenues for future studies that could advance the field by addressing these knowledge gaps providing valuable direction to new researchers interested in exploring these specific areas as well as practitioners seeking a comprehensive understanding of various aspects related to Tanzania's cultural heritage tourism

The objective was to conduct a scoping review and produce a publicly available database characterizing the design and reporting elements of the literature on dietary added sugars and select health outcomes. Relevant studies published from 1990 – 2021 were identified to create a database containing information on study and population characteristics, reported added sugars source and concentrations, diet energy balance, total energy intake, and outcome measures related to body composition, obesity, cardiovascular disease, and diabetes mellitus. There were 245 publications identified, 22% of which describe interventions and 78% describe observational studies. Publications pertaining to added sugars have risen dramatically since 2010, led by studies primarily assessing body composition (36%) or cardiovascular health (32%), including adults (65%), measuring liquid-only sources of added sugars (56%). Over 65% of studies reported total energy intake, 61% controlled for total energy intake in the design and analysis, and fewer than 5% of studies reported the energy balance of subjects. There has been a significant increase in research on added sugars since 2010, with substantial heterogeneity across all facets of methodology – study designs, exposures and outcomes of interest, terminology, and reporting of dietary intake data – thus limiting the ability to synthesize evidence in this scope of literature. This evidence map highlights gaps and important areas for improvement to strengthen the state of research to better inform future policies and dietary recommendations on added sugars.

Balance requires constant adjustments in muscle activation to attain force steadiness. Creating appropriate training can be challenging. The purpose of this study was to examine the effects of two weeks front squat instability training using a water-filled training tube on force steadiness during an instability challenge. Control (CON, n= 13) and experimental (EXP, n=17) subjects completed pre and post testing for EMG variability by completing one set of 10 repetitions with a stable and unstable training tube. Electrodes were placed bilaterally on the anterior deltoid, paraspinal and vastus lateralis muscles. CON subjects completed 2 weeks of training using a stable training tube, while EXP subjects trained with a water-filled instability tube. EMG data were integrated for each contraction and force steadiness computed using the natural log of coefficient of variation. CON results showed no changes in force steadiness for any condition. EXP showed significant reductions in EMG activation variability across all muscles. These results indicate a significant training effect in reducing muscle activation variability in subjects training with a water-filled instability training device. Improvements seen in these healthy subjects supports development of training implements for a more clinical population to help improve force steadiness.

Radiological imaging is an essential component of a swallowing assessment. Artificial intelligence (AI), and especially deep learning (DL) models, have enhanced the efficiency and efficacy through which imaging is interpreted, and subsequently have important implications for swallow diagnostics and intervention planning. However, the application of AI for the interpretation of videofluoroscopic swallowing studies (VFSS) is still emerging. This review showcases recent literature in the use of AI to interpret VFSS and highlights clinical implications for speech pathologists (SPs). With a surge in AI research, there have been advances made in dysphagia assessment. Several studies have demonstrated successful implementation of DL algorithms to analyze VFSS. Notably, convolutional neural networks (CNNs) have been used to detect pertinent aspects of the swallowing process with high levels of precision. DL algorithms have the potential to streamline VFSS interpretation, improve efficiency and accuracy, and enable precise interpretation of instrumental dysphagia evaluation, which is especially advantageous when access to skilled clinicians is not ubiquitous. By enhancing precision, speed, and depth of VFSS interpretation, SPs can obtain a more comprehensive understanding of swallow physiology and deliver targeted and timely intervention that is tailored towards the individual. This has practical applications for both clinical practice and dysphagia research. As this research area grows and AI technologies progress, the application of DL in the field of VFSS interpretation is clinically beneficial and has the potential to transform dysphagia assessment and management. With broader validation and inter-disciplinary collaborations, AI-augmented VFSS interpretation is likely to transform swallow evaluation and ultimately improve outcomes for individuals with dysphagia.

In this study, I will present some documentary evidence that Carlos Drummond de Andrade’s poem “A Máquina do Mundo” [The Machine of the World] (1949) was based on prior reflections contained in a forgotten newspaper article entitled “Poesia e Pesadelo” [Poetry and Nightmare] (1949). In that article, Drummond critically analyzed some of the theses of Stephen Spender's essay “What Is Modern in Modern Poetry” (1948), which had just been published in The Tiger's Eye magazine. As soon as he read Spender's text, Drummond wrote “Poetry and Nightmare” and began to elaborate a narrative poem whose protagonist would be a machine. All the documentary evidence indicates that Drummond took Spender's lessons as touchstones for the elaboration of the narrative and allegorical structure of “The Machine of the World.” According to the interpretation I am proposing here, Drummond, in writing the machine poem, put into practice at least six lessons drawn from Spender’s essay, namely: 1) the modern poet must represent the tension between the external machinelike landscape and the landscape of the inner world of the creative imagination; 2) he must also represent the machinelike, ugly, and urban world around him in a beautiful and poetic way; 3) he must avoid the misconceptions of excessive utopian visionarism, as well as creeping realism; 4) he must reject the imperative of political engagement, whose principle of action states that poetry has a transformative mission in society; 5) he must free himself from the obsession with free verse as the only form of modern poetry and start using the traditional fixed forms; 6) he must understand machines as poetic symbols of human passions, and not just as exotic objects foreign to human reality. My conclusion is that, after reading Spender’s essay, Drummond changed his aesthetic and philosophical understanding of what defines the essence of modern poetry, both in terms of form and content.

Nuclear technologies have the potential to play a unique role delivering low carbon energy for a future net-zero society. However, for the long-term success, nuclear will need to deliver innovative solutions as proposed in iMAGINE. One of the key challenges for the envisaged highly integrated nuclear energy system is the need for a demand driven salt clean-up system. The work described provides an insight into the interplay between a potential salt clean-up system and the reactor operation in a dynamic approach. The results provided will help to optimize the parameters for the salt clean-up process by delivering a dynamically calculated priority list identifying the elements with high influence on reactor operation. The integrated model is used to investigate the ideal time for the initiation of the clean-up as well as the effect of different throughput through the clean-up system on criticality as well as on the concentration of the elements in the reactor salt. Finally, a staggered approach is proposed with the idea to phase in the chemical clean-up processes step by step to keep the reactor critical. The results provide an essential step for the progress of iMAGINE as well as the basis for the inter disciplinary work required to bring iMAGINE into real operation.

Molten salt reactors have gained substantial interest in the last years due to their flexibility and their potential for simplified closed fuel cycle operation for massive net-zero energy production. However, a zero-power reactor experiment will be an essential first step into the process of delivering this technology. The topic of the control and shut down for a zero power reactor is for the first time introduced through a literature review and the reduction of the control approaches to a limited number of basic functions with different variations. In the following, the requirements for the control and shutdown system for a reactor experiment are formulated, and based on these assessments, an approach for the shutdown – splitting the lower part of the core with reflector, and an approach for the control – a vertically movable radial reflector are proposed. Both systems will be usable for a zero-power system with a liquid as well as with as a solid core and even more importantly, both systems somehow work on the integral system level without disturbing the central part of the core which will be the essential area for the experimental measurements. Both approaches have been investigated as a singular system as well as their interactions with one another and the sensitivity of the control system. The study has demonstrated that both proposed systems are able to deliver the required characteristics with sufficient shutdown margin and a sufficiently wide control span. The interaction of the system has been shown to be manageable and the sensitivity is on a very good level. The multi-group Monte-Carlo approach has been cross evaluated by a continuous energy test leading to good results, but they also demonstrate that there is room for improvement.

Molten salt reactors have gained substantial interest in the last years due to their flexibility and their potential for simplified closed fuel cycle operation for massive net-zero energy production. The importance of a zero-power reactor for the process of developing a new, innovative rector concept like molten salt fast reactor is described here. It is based on historical developments as well as the current demand for experimental results and key factors that are relevant to the success of the next step in the development process of all innovative reactor types. In the systematic modelling & simulation of a zero-power molten salt reactor, the radius and the feedback effects are studied for a eutectic based system, while a heavy metal rich chloride-based system are studied depending on the uranium enrichment accompanied with the effects on neutron flux spectrum and spatial distribution. These results are used to support the relevant decision for the narrowing down of the configurations supported by considerations on cost and proliferation for the follow up 3D analysis to provide for the first time a systematic modelling & simulation approach for a new reactor physics experiment. The expected core volumes for these configurations have been studied using multi-group and continuous energy Monte-Carlo simulations identifying the 35% enriched systems as the most attractive and finally leading to the choice of the heavy metal rich compositions 35% enrichment as the reference system for future studies of the next steps in the zero power reactor investigation. The inter-comparison of the different applied codes and approaches available in the SCALE package has delivered a very good agreement between the results creating trust into the developed and used models and methods.

Molten salt reactors have gained substantial interest in the last years due to their flexibility and their potential for simplified closed fuel cycle operation for massive net-zero energy production. However, a zero-power reactor experiment will be an essential first step into the process delivering this technology. The choice of the optimal reflector material is one of the key issues for such experiments since on the one hand it offers huge cost saving potential due to reduced fuel demand, on the other hand an improper choice of the reflector material can have negative effects on the quality of the experiments. The choice of the reflector material is for the first time introduced through a literature review and a discussion of potential roles of the reflector. The 2D study of different potential reflector materials has delivered a first down selection with SS 304 as representative for stainless steel, lead, copper, graphite, and beryllium oxide. A deeper look identified in addition iron-based material with high Si content. The following evaluation of the power distribution has shown the strong influence of the moderating reflectors creating a massively disturbed power distribution with a peak at the core boundary. This effect has been confirmed through a deeper analysis of the 2D multi-group flux distribution which lead to the exclusion of the BeO and the graphite reflector. The most promising materials identified have been SS 304, lead, and copper. The final 3D Monte-Carlo study demonstrated that all three materials have the potential to reduce the required amount of fuel by up to 60% compared NaCl which has been used in previous studies and is now taken as reference A first cost analysis has identified the SS 304 reflector as the most attractive solution. The results of the 2D multi group deterministic study and the 3D multi group Monte-Carlo study have been confirmed through a continuous energy Monte-Carlo reference calculation showing only minor differences.

Based upon a radically new approach, this paper describes a 2-box absolute flow model that calculates the CO₂ transfer between the atmosphere and a terrestrial / ocean mixing reservoir. Given the inputs of anthropogenic fossil fuel emissions (CO2ff), atmospheric CO₂ mixing-ratio and nuclear weapons bomb yields, the model calculates atmospheric d¹³C and Δ¹⁴C time-series, with the level of agreement for d¹³C being to within ± 0.05 ‰, for Δ¹⁴C to within ± 3‰, spanning 200 years. The model contains only seven internal parameters which are varied to optimize the fit. Yet according to conventional wisdom, this model should not work. It is commonly held that the ¹³C and ¹⁴C isotopic forms of carbon bypass seawater carbonate chemistry, resulting in very different absorption properties (Revelle factor) as compared to ¹²C. This study rejects this assumption, and uses the same residence time and reservoir mixing properties for all isotopes. The paper includes an analysis justifying why the isotopic bypass of the Revelle factor is not significant. The study describes the use of the model to track CO2ff takeup using two separate measures, a) the amount of molecular CO2ff remaining in the atmosphere and b) the amount of atmospheric growth attributable to CO2ff, thereby resolving discrepancies in published values.

This paper presents a new implementation of a 2-box absolute flow model, enabling the calculation of CO₂ transfer between the atmosphere and a mixing reservoir representing the combined effect of the terrestrial and ocean regions. The model uses published values of anthropogenic CO₂ fossil fuel emissions (CO2ff), atmospheric CO₂ mixing ratio and nuclear weapons bomb yields, to compute atmospheric d¹³C and Δ¹⁴C time-series. The level of agreement between the calculated values and the accepted values for d¹³C is within ± 0.05 ‰, and for Δ¹⁴C is within ± 3‰, spanning 200 years. The model contains only seven internal parameters; these are varied to optimize the fit, leading to reasonable parameter values, indicating the validity of the method. In addition, the model shows how a rising CO₂ exchange influx fluctuating with surface temperature is compatible with a nett atmospheric CO₂ sink. The study demonstrates that a single CO₂ residence time applies to both the ¹⁴C bomb pulse and the anthropogenic flux, contrary to the conventional view that "bomb radiocarbon and anthropogenic CO₂ do not behave identically." [Joos 1994 Nature 370, 181–182]. It is shown that the difference in behaviour, claimed to be due to seawater chemistry, is not significant in practice since fluctuating bulk carbon dominates fluctuating isotopic ratio. A new analysis of the airborne fraction indicates that the assumption of a time-dependent exchange influx results in a similar residence time for bulk CO₂ as for ¹⁴C in the nuclear bomb pulse, reinforcing the view that the ¹²C, ¹³C and ¹⁴C carbon isotopic forms of CO₂ behave similarly in the carbon cycle.

Despite great strides in the development of contraceptive technologies, the United States has one of the highest teen pregnancy rates in the world. Many investigators have aimed to examine the relationship between religion and the sexual health behaviors of college students to determine how social factors may influence the use of contraception amongst college students. Thus, we aimed to examine the differences in current contraceptive method and age of first contraceptive usage among sexually active female college students with different religious affiliations and strengths of religiosity. It was hypothesized that there would be no difference in current contraceptive methods among different religious affiliations and strengths of religions, and that there would be a difference in age of first contraceptive usage among different religious affiliations and strengths of religiosity. Two-hundred twenty-four college aged females completed a 20-question survey about sexual health and religious practices. Chi-squared tests were implemented to determine if the frequencies of responses across religious affiliations and strengths of religiosity. Significant differences in the frequency of responses for age of first contraceptive usage were observed across different strengths of religiosity (p=0.016) and for the self-perceived impact of religion on sexual health across different religious affiliations (p=0.033) and strengths of religiosity (p=0.005). All other differences were found not to be statistically significant. It was determined that increased strengths of religiosity resulted in delayed onset of contraceptive us-age and that both different religious affiliations and greater strengths of religiosity lead to different self-perceived impacts of religion on sexual health.

Detecting cracks in teeth is a clinical challenge. Patients may complain of diffuse pain on chewing, pain, at times, on temperature change and pain that occurs episodically. Common diagnostic tools such as radiographs and visual examination may not detect cracks. This case report shows how PTR-LUM in The Canary System can detect cracks in teeth not seen with other devices. In this clinical situation, the crack involved a portion of the mesial and distal surfaces of a mandibular second molar.

The species composition of vultures and their interactions on carcasses of various stages of decomposition is not well understood yet it potentially affects their food acquisition and survival. We collected data from six carcasses between June and December 2021 using camera traps that were set on carcasses undergoing various decomposition states in Sinamatella Camp of Hwange National Park, Zimbabwe. Of interest were the cases in which each vulture species was dominating in interactions which gave it an advantage in terms of food acquisition. Four vulture species were observed (White-backed, White-headed, Lappet-faced and Hooded Vultures). Vulture abundances were greatest on fresh carcasses and least on dry ones. Although dominance behaviors by the White-backed and White-headed Vultures were recorded over all other vulture species, there were no records of the Lappet-faced dominating other vultures. In addition, the Hooded Vultures were mostly dominating non-vulture avian species on advanced decay carcasses. Our results demonstrate how various species may be prone to intense competition that may further place them at disadvantageous positions if food sources decline, more so under climatic shifts and various anthropogenic pressures.

The objective of this work is to evaluate the potential effect of cardiac stress exercise on the accumulation of [¹²³I]IAZA, a radiopharmaceutical used to image focal tissue hypoxia, in otherwise normal myocardium in healthy volunteers, and to determine the impact of exercise on [¹²³I]IAZA pharmacokinetics. The underlying goal is to establish a rational basis and a baseline for studies of focal myocardial hypoxia in cardiac patients using [¹²³I]IAZA. Three healthy male volunteers ran the ‘Bruce’ treadmill protocol, a clinically-accepted protocol designed to expose myocardial ischemia in patients. The ‘Bruce’ criterion heart rate is 85% of [220 – age]. Approximately one minute before reaching this level, [¹²³I]IAZA (5.0 mCi/0.85 mg) was administered as a slow (1–3 min) single intravenous (i.v.) injection via an indwelling venous catheter. The volunteer continued running for an additional 1 min before being transferred to a gamma camera. Serum samples were collected from the arm contralateral to the administration site at pre-determined intervals from 1 min to 45 h post injection and were analyzed by radio HPLC. Pharmacokinetic (PK) parameters were derived for [¹²³I]IAZA and total radioactivity (total[¹²³I]) using compartmental and noncompartmental analyses. Whole-body planar scintigraphic images were acquired from 0.75 to 24 h after dosing. PK data and scintigraphic images were compared to previously published [¹²³I]IAZA data from healthy volunteers rest. Following exercise stress, both [¹²³I]IAZA and total[¹²³I] exhibited bi-exponential decline profiles, with rapid distribution phases [half-lives (t_1/2α) of 1.2 and 1.4 min, respectively], followed by slower elimination phases [t_1/2β of 195 and 290 min, respectively]. Total body clearance (CL_TB) and the steady state volume of distribution (V_ss) were 0.647 L/kg and 185 mL/min, respectively, for [¹²³I]IAZA and 0.785 L/kg and 135 mL/min, respectively, for total[¹²³I]. The t_1/2β, CL_TB and V_ss values were comparable to those reported previously for rested volunteers. The t_1/2α was approximately 4-fold shorter for [¹²³I]IAZA and approximately 3-fold shorter for total[¹²³I] under exercise relative to rested subjects. The heart region was visualized in early whole body scintigraphic images, but later images showed no accumulated radioactivity in this region, and no differences from images reported for rested volunteers were apparent. Minimal uptake of radiotracer in myocardium and skeletal muscle was consistent with uptake in non-stressed myocardium. Whole-body scintigrams for [¹²³I]IAZA in exercise-stressed healthy volunteers were indistinguishable from images of non-exercised volunteers. There was no evidence of hypoxia-dependent binding in exercised but otherwise healthy myocardium, supporting the conclusion that exercise stress at Bruce protocol intensity does not induce measurable myocardial hypoxia. Effects of exercise on PK parameters were minimal; specifically, the t_1/2α was shortened, reflecting increased cardiac output associated with exercise. It is concluded that because [¹²³I]IAZA was not metabolically bound in exercise-stressed myocardium, a stress test will not create elevated myocardial background that would mask regions of myocardial perfusion deficiency. [¹²³I]IAZA would therefore be suitable for the detection of viable, hypoxic myocardium in patients undergoing stress-test-based diagnosis.

Nuclear technologies have a strong potential and a unique role to play in delivering reliable low carbon energy for a future net-zero society. However, to assure the sustainability required for the long-term success, nuclear will need to deliver innovative solutions as proposed in iMAGINE. One of the most attractive features, but also a key challenge for the envisaged highly integrated nuclear energy system is the need for a demand driven salt clean-up system. The work described provides an insight into the interplay between a potential salt clean-up system and the reactor operation in a plutonium started core in a dynamic approach. The results presented will help to optimize the parameters for the salt clean-up process as well as to understand the differences which appear between a core started with enriched Uranium and Plutonium as the fissile material. The integrated model is used to investigate the effects of the initial fissile material on core size, achievable burnup, and long term operation. Different approaches are tested to achieve a higher burnup in the significantly smaller Pu driven core. The effects of different clean-up system throughputs on the concentration of fission products in the reactor salt and its consequences are discussed for general molten salt reactor design. Finally, an investigation of how a plutonium loaded core could be used to provide fuel for future reactors through fuel salt splitting is presented with the outcome that one Pu started reactor of the same size as a uranium started core could deliver fuel for 1.5 new cores due to enhanced breeding. The results provide an essential understanding for the progress of iMAGINE as well as the basis for inter-disciplinary work required for optimizing iMAGINE.

Additive manufacturing (AM) provides customization of the microstructure and mechanical properties of components. Selective laser melting (SLM) is the commonly used technique for processing high strength Aluminum alloys. Selection of SLM process parameters could control the microstructure of fabricated parts and their mechanical properties. However, process parameter limits and defects inside the as-built parts present obstacles to customized part production. This study is the second part of a comprehensive work that investigates the influence of SLM process parameters on the quality of as-built Al6061 and AlSi10Mg parts. The microstructure of both materials was characterized for different parts processed over a wide range of SLM process parameters. The optimized SLM parameters were investigated to eliminate the internal microstructure defects. Mechanical properties of the parts were illustrated by regression models generated with design of experiment (DOE) analysis. The results reported in this study were compared to previous studies, illustrating how the process parameters and powder characteristics could affect the quality of produced parts.

Additive manufacturing (AM) of high strength Al alloys promises to enhance the performance of critical components related to various aerospace and automotive applications. The key advantage of AM is its ability to generate lightweight, robust, and complex shapes. However, the characteristics of the as-built parts may represent an obstacle to satisfy the part quality requirements. The current study investigates the influence of selective laser melting (SLM) process parameters on the quality of parts fabricated from different Al alloys. A design of experiment (DOE) is used to analyze relative density, porosity, surface roughness, and dimensional accuracy according to the interaction effect between the SLM process parameters. The results show a range of energy densities and SLM process parameters for the AlSi10Mg and Al6061 alloys needed to achieve “optimum” values for each performance characteristic. A process map is developed for each material by combining the optimized range of SLM process parameters for each characteristic to ensure good quality of the as-built parts. The second part of this study investigates the effect of SLM process parameters on the microstructure and mechanical properties of the same Al alloys. This comprehensive study is also aimed at reducing the amount of post-processing needed.

The Rev. Martin Luther King Jr. and Nelson Mandela were two of the world's most iconic civil (political) (human) rights advocates and leaders of all time. Both advocated for, and to varying degrees, applied elements of peaceful protests to the achievement of their goals. Both spent time in jail, often concurrently, but eventually forced their respective countries to extend the same rights that white populations had denied Africans and African Americans. For the US, civil rights, voting rights, right to education, housing and housing loans suggested that equality had been achieved, capped in South Africa by the election of Nelson Mandela as the first majority-rule president, and in the US, by Barack Obama’s election to the presidency. Yet the historical over-policing, police mistreatment and more generally, the judicial system’s inordinate ‘targeting’ of African Americans, with egregious cases running from Emmett Till to Rodney King to Walter Scott to Breonna Taylor to George Floyd to Rayshard Brooks and thousands of others shows the danger of such magical thinking. The now-persistent global wave pursuing human rights, civil rights and the right to be treated equally, primarily driven by the loosely-organized Black Lives Matter (BLM) movement, has become the leading voice in pursuit of equality. Riots such as those in LA, protests in Ferguson and everywhere in summer 2020 has ushered new civil rights campaign. In the US and elsewhere, it has morphed to include historical issues such as monuments to colonialism, the US civil war, slavery and slave owners and traders, institutions, companies and people whose wealth and existence has links to slavery. Instructively, the protests persisted even as COVID-19, the hundred-year plague, continues to ravage the world. Lost in the moment is the absence of central leadership and leaders such as MLK or Mandela. Their charisma and effectiveness has been lacking for 50 years. This paper evaluates whether this has led to inconsistent civil and human rights pursuit for equality, or whether perchance, Mandela and MLK were extraordinary, once-in-a-lifetime transformative leaders uniquely selected by history for their time.

1. Background: The global COVID-19 lockdowns are unique psychological factors, requiring adjustment and coping. This illustrative, South African case study investigated the influence the COVID-19 lockdown context would have on meditation and physical activity. As these were lifestyle patterns the null hypothesis was of no change. 2. Method: The methodology consisted of quantitative and qualitative phases. The quantitative phase was an empirical, case study review of data from the author’s HeartMath and Fitbit electronic devices, as from 9 November 2019 to 31 July 2021. This consisted of coherence and achievement data from the HeartMath Inner Balance application (app), as well as distance and activity data from the Fitbit app. The qualitative phase consisted of the selection and illustration of meditation sessions documented over lockdown. 3. Results: The highly significant increases in physical activity and meditation coherence and achievement collectively indicated significant health promotion over the COVID-19 Lockdown period. Subtle energetic, experiential descriptions of meditation apprehensions resonated and supported these quantitative findings. 4. Conclusions: COVID-19 lockdown has meant transformation, humility, and reordering of priorities. The meditation descriptions amplified information from the HeartMath and Fitbit electronic devices, together co-creating conscious, embodied, relationship science for discussion, instruction, and further research.

Systemic inflammation plays a central role in many diseases and is, therefore, an important therapeutic target. In a scoping review, we assessed the evidence base for anti-inflammatory effects of pre-, pro- and synbiotics in children. Of 1254 clinical trials published in English in Ovid Medline and Cochrane Library PubMed from January 2003 through September 2022, 29 were included in the review. In 6 studies of healthy children (n=1552), one reported that fructo-oligosaccharides added to infant formula significantly reduced pro-inflammatory biomarkers and one study of a single strain probiotic reported both anti- and pro-inflammatory effects. No effects were seen in the remaining two single-strain and one multi-strain probiotic and one synbiotic study. In 23 studies of children with diseases (n=1550), prebiotics were tested in 3, single-strain in 16 and multi-strain probiotics in 6 and synbiotics in 2 studies. Significantly reduced inflammatory biomarkers were reported in 7/10 studies of atopic/allergic conditions, 3/5 studies of auto-immune diseases, 1/2 studies of preterm infants, 1 study of overweight/obesity, 2/2 studies of severe illness and 2/3 studies of other diseases. However, often only one or two of several biomarkers were improved, increased pro-inflammatory biomarkers occurred in 5 of these studies and a probiotic increased inflammatory biomarkers in a study of newborns with congenital heart disease. The evidence base for the effects of pre-, pro- and synbiotics on systemic inflammation in children is weak. Further research is needed to determine if anti-inflammatory effects depend on the specific pre-, pro- and synbiotic preparations, health status and biomarkers studied.

Broflanilide is a novel active ingredient from a unique insecticide class (IRAC Group 30) and was investigated as a control option against modern insecticide resistant strains of the common bed bug, Cimex lectularius. The susceptibility of technical grade broflanilide and efficacy of a broflanilide-based aerosol formulation (Earth Corp., Japan) were evaluated against five C. lectularius strains (MONH, SYD, DARL, PARRA, RIPPO). Results demonstrated that bed bugs had high susceptibility to broflanilide (RR50: SYD=1.22-fold, DARL=1.03-fold, PARRA=3.65-fold, RIPPO=2.77-fold), compared to the susceptible MONH strain. The aerosol showed high efficacy to adult bed bugs (97.5–100 % mortality to five strains after 24 hrs post-spray) and produced a notable decrease in egg hatch rates (MONH=9.7–23.4 %, PARRA=14.9–22.6 %). The aerosol also demonstrated high residual activity with 97.5–100% mortality in all five bed bug strains within 7 days exposure. The impact of different surface types upon aerosol residual efficacy was limited, although residues on a non-porous surface (tile) killed bed bugs slightly quicker than that on a porous surface (filter paper). The aerosol provided long residual activity to bed bugs, as 6-month-old residues were as equally efficacious to that of fresh residues. Bed bugs did not avoid surfaces treated with the aerosol. The high efficacy (including ovicidal efficacy), long residual activity, and non-avoidance of bed bugs on treated surfaces, demonstrated that broflanilide is highly suitable for modern bed bug management.

This year marks the 20th anniversary of the discovery that proteins with various cellular functions can be temporarily immobilized in the nucleolus, a process known as nucleolar sequestration. This review reflects on the progress made to understand the physiological roles of nucleolar sequestration and the mechanisms involved in protein immobilization. We discuss how nucleolar sequestration consists of a highly choreographed amyloidogenic liquid-to-solid phase transition that converts the nucleolus into Amyloid bodies (A-bodies). The study of solid condensates A-bodies will offer unique perspectives on cellular assembly of membrane-less compartments and provide alternative insights on pathological amyloidogenesis involved in neurological disorders.

White adipose tissue (WAT) represents an endocrinologically and immunologically active tissue that’s primary role is energy storage and homeostasis. Breast WAT is involved in the secretion of hormones and proinflammatory molecules that are associated with breast cancer development and progression. The role of adiposity and systemic inflammation in immune responses and resistance to anti-cancer treatment in breast cancer (BC) patients is still not clear. This review aims to evaluate the emerging evidence on the crosstalk between adiposity and the immune-tumour microenvironment in BC, its progression and treatment resistance. Adiposity, and by extension subclinical inflammation, are associated with metabolic dysfunction and changes in the immune-tumour microenvironment in BC. In oestrogen receptor positive (ER+) breast tumours, it is proposed that these changes are mediated via a paracrine interaction between macrophages and preadipocytes leading to elevated aromatase expression and secretion of pro-inflammatory cytokines and adipokines in the breast tissue in patients who are obese or overweight. In HER2+ breast tumours, WAT inflammation has been shown to be associated with resistance to trastuzumab mediated via MAPK or PI3K pathways. Furthermore, adipose tissue in patients with obesity is associated with upregulation of immune checkpoints on T-cells that is partially mediated via immunomodulatory effects of leptin and has been paradoxically associated with improved responses to immunotherapy in several cancers. In conclusion, evidence suggests that body composition and metabolic status are associated with patient outcomes. To optimise patient stratification and personalisation of treatment, prospective studies are required to evaluate the role of body composition and metabolic parameters in metabolic immune reprogramming with and without immunotherapy in patients with BC.

This review critically examines the various ways in which the mechanical properties of wood have been understood. Despite the immense global importance of wood in construction, most understanding of its elastic and inelastic properties is based on models developed for other materials. Such models neglect wood’s cellular and fibrous nature. This review thus questions how well models that were originally developed for homogeneous and effectively continuous materials can describe wood’s mechanical properties. For example, the elastic moduli of wood have been found by many authors to depend on the size of the test specimen. Such observations are incompatible with classical elasticity theory. There is also much uncertainty about how well elastic moduli can be defined for wood. An analysis of different models for size effects of various inelastic properties of wood shows that these models only approximate the observed behaviour, and do not predict or explain the scatter in the results. A more complete understanding of wood’s mechanical properties must take account of it being in some sense intermediate between a material and a structure.

The increased adoption of information and communication technology for smart grid applications will require innovative cyber-physical system (CPS) testbeds to support research and education in the field. The groundbreaking CPS testbeds with realistic and scalable platforms have progressively gained interest in recent years, with electric power flowing in the physical layer and information flowing in the network layer. However, CPSs are critical infrastructures and not designed for testing or direct training, as any misbehaving in an actual system operation could cause a catastrophic impact on its operation. Based on that, it is not easy to efficiently train professionals in CPSs. Aiming to support the advancement and encourage the training of industry professionals, this paper proposes and develops a complete testbed with commercial tools. The testbed can reliably replicate the performance of smart grid systems and the main potential cyber threats that electric grids may face. The complex interdependencies between the cyber and physical domains are discussed in detail, and different case scenarios are presented, providing insightful guidelines for key features and design decisions for future smart grid testbeds.

Although total nett CO₂ atmospheric flow can be estimated with reasonable accuracy, the contributing gross fluxes between the atmosphere and the earth's surface are poorly understood. This paper presents a method, driven by the objective of simplicity, by which the global outflow and inflow of CO₂ between atmosphere and a globally equivalent "mixing reservoir" can be estimated, using the isotopes ¹⁴C and ¹³C as tracers. It has been asserted that the isotopic carbon in CO₂ cannot be directly used as a tracer in flow studies because it is not subject to the Revelle factor. Evidence is provided showing that this view is mistaken. The model contains 7 key parameters which are used to create synthetic records of Δ¹⁴C and d¹³C spanning 200 years or more, including during the period of atmospheric weapons testing and its decay known as the "bomb pulse". By optimising the fit between these computed values and the historical records of d¹³C and Δ¹⁴C, all seven key parameters are determined. The effective "mixing reservoir" is thereby determined to have a size around six times that of the atmosphere, with global outflux rising from 39.7 GTC yr-1 in 1750 to 58.9 GTC/yr in 2020, this figure probably not including annually cycled carbon.

Abstract: Comparing outcrop data to laboratory results is important to verify and validate experiments of analogue and reservoir materials especially regarding conditions for deformation experiments. This is important better understand highly complex carbonate reservoir strata and their response to changes in subsurface conditions, reducing subsurface uncertainty. This study develops methods to allow for a more straightforward comparison of outcrop data (m-scale) with experimentally created fracture arrays developed in cylindrical samples (cm-scale). The main objective is to assess usefulness of experimentally-produced fracture networks as analogues for subsurface structures, typically at the meter and above scale by developing new techniques to use the lab deformation. It analyses key characteristics of laboratory-induced fracture networks by adapting scanline methods to use with x-ray tomography (XRT) images to allow for comparison with outcrop and field data. To test and verify these new methods two low permeability carbonate samples were used for deformation testing and analysis. Applying the different scanline methods we show that they can be used to analyse lab induced fractures (mm to cm-scale) identified in XRT images for comparison with outcrop data (m-scale). In addition, these methods also allow for quantification of fracture network attributes e.g. fracture spacing, fracture apertures, orientation. This new data bridges the gap between micro-scanlines using thin sections and outcrop scanlines.

Keywords: conservation; cultural pluralism; environmental regulation; community-based natural resource management; Indigenous law

Floods and droughts are driven, in part, by spatial patterns of extreme rainfall. Heat waves are driven by spatial patterns of extreme temperature. It is therefore of interest to design statistical methodologies that allow the identification of likely patterns of extreme rain or temperature from observed historical data. The standard work-horse for identifying patterns of climate variability in historical data is Principal Component Analysis (PCA) and its variants. But PCA optimizes for variance not spatial extremes, and so there is no particular reason why the first PCA spatial pattern should identify, or even approximate, the types of patterns that may drive these phenomena, even if the linear assumptions underlying PCA are correct. We present an alternative pattern identification algorithm that makes the same linear assumptions as PCA, but which can be used to explicitly optimize for spatial extremes. We call the method Directional Component Analysis (DCA), since it involves introducing a preferred direction, or metric, such as `sum of all points in the spatial field'. We compare the first PCA and DCA spatial patterns for US rainfall anomalies on a 6 month timescale, using the sum metric for the definition of DCA in order to focus on total rainfall anomaly over the domain, and find that they are somewhat different. The definitions of PCA and DCA result in the first PCA spatial pattern having the larger explained variance of the two patterns, while the first DCA spatial pattern, when scaled appropriately, has a higher likelihood and greater total rainfall anomaly, and indeed is the pattern with the highest total rainfall anomaly for any given likelihood. In combination these two patterns yield more insight into rainfall variability and extremes than either pattern on its own.

In Yaoundé, Cameroon, excessive and inappropriate speeding remains a major public health concern. Part of the problem are the unsafe speed limits, lack of evidence, and effective evaluation of speeding safety performance indicators (SSPIs), and the absence of speed management, hindering the city's ability to mitigate the risks associated with speeding. This study aimed to address this knowledge gap by assessing SSPIs using a well-defined methodology and suggesting speed management strategies. Data on speed, traffic volumes and road attributes were collected from a random selection of 16 representative road sections in Yaoundé. Seven SSPIs were calculated, and weights were assigned to evaluate city-level SSPIs. The findings showed that 66.8% of drivers drive within the speed limit, generally operating at speeds of 54 km/h with a speed variation of 26 km/h. Based on the speed analysis, evidence-based strategies are proposed, and implementing these strategies could potentially reduce fatalities and serious injuries by 16% to 84% across study locations, as indicated by Elvik's model. These findings have significant policy implications for reducing speeding in Yaoundé, and the methodological approach can be replicated in other urban settings. Future research should extend SSPI evaluation to the national level and test the effectiveness of the recommended strategies.

Influenza A (IAV) is a major human respiratory pathogen, causing illness, hospitalizations, and mortality annually worldwide. IAV is also a zoonotic pathogen with a multitude of hosts, allowing for interspecies transmission, reassortment events, and the emergence of novel pandemics, as was seen in 2009 with the emergence of a swine origin H1N1 (pdmH1N1) virus into humans, causing the first influenza pandemic of the 21st century. While the 2009 pandemic was considered to have high morbidity and low mortality, studies have linked the pdmH1N1 virus and its gene segments to increased disease in humans and animal models. Genetic components of the pdmH1N1 virus currently circulate in the swine population, reassorting with endemic swine viruses that co-circulate and occasionally spillover into humans. This is evidenced by the regular detection of variant swine IAVs in humans associated with state fairs and other intersections of humans and swine. Defining genetic changes that support species adaptation, virulence, and cross-species transmission, as well as mutations that enhance or attenuate these features will improve our understanding of influenza biology, aid in surveillance and virus risk assessment, and guide the establishment of counter measures for emerging viruses. Here, we review current understanding of determinants of specific IAV phenotypes, focusing on the fitness, transmission, and virulence determinants that have been identified in swine IAVs and/or in relation to the 2009 pdmH1N1 virus.

We proposed a novel concept of flight time matrix (FTM). In this work, the proposed FTM was verified first numerically. The numerical simulation revealed perfect results which showed that FTM can be used to assist the nondestructive evaluation of ballistic armor plates using acousto-ultrasonics. Two donated commercial ballistic armor plates were sought for a case study where artificial defects were prepared. The results of FTM were reasonably well. The artificial defects were clearly identifiable in one directional location array and FTM contour graphs. More comprehensive superimpositions of flight time vs location and FTM contour plots can be advanced to a better visualization of the defect presence. The resolution of FTM method is in the range of submillimeter or less. This study demonstrated that AU (acousto-ultrasonics) technique is a field applicable and yet reliable tool for inspection of the hidden defects in body armors. A broader merit of the proposed FTM algorithm is that it may promote the development of specific tools/device for nondestructive evaluations field.

Non-destructive testing is an emerging need in manufacturing processes and in service of ballis-tic armor plates. It has been shown that acoustic emission and ultrasonics are among the most applicable techniques. However, these techniques often require relative sophisticated processing and strong tech background for the evaluators. The purpose of the present work is to develop a flight time based algorithm and to demonstrate this algorithm using commercial multilayered armor plates. We proposed a novel concept of flight time matrix (FTM). In this work, the proposed FTM was verified first numerically. The numerical simulation revealed perfect results which showed that FTM can be used to assist the nondestructive evaluation of ballistic armor plates using acous-to-ultrasonics. Two donated commercial ballistic armor plates were sought for a case study where artificial defects were prepared. The results of FTM were reasonably well. The artificial defects were clearly identifiable in one directional location array and FTM contour graphs. More com-prehensive superimpositions of flight time vs location and FTM contour plots can be advanced to a better visualization of the defect presence. The resolution of FTM method is in the range of submillimeter or less. This study demonstrated that AU (acousto-ultrasonics) technique is a field applicable and yet reliable tool for inspection of the hidden defects in body armors. A broader merit of the proposed FTM algorithm is that it may promote the development of specific tools/device for nondestructive evaluations field.

Typhoid fever is an infectious disease that affects humanity worldwide particularly in the lower socio-economic communities where many individuals are exposed to a dirty environment and unclean food. A mathematical model is formulated to analyze the impact of control measures such as vaccination of susceptible humans, treatment of infected humans and sanitation in the different socio-economic communities. The model assumed that the population comprises of two socio-economic classes. The essential dynamical system analysis of our model was appropriately carried out. The impact of the control measures was analyzed, and the optimal control theory was applied on the control model to explore the impact of the different control measures. Numerical simulation of the models and the optimal controls were carried out and results obtained indicates that the overall combination of the control measures eradicates Typhoid fever in the population but the controls are more optimal in the higher socio-economic communities.

Parts I and II of this 3-part series indicated how a global review of both English-language and non-English language papers plus a focus on a lipidosterolic extract of Serenoa repens (LSESr) having a standardized fatty acid profile have together engendered new insights about the biological activity of LSESr vs. LUTS. In this last of a 3-part series, data from the world literature is presented that confirms that LSESr efficacy is the predominant finding in clinical trials. Despite two placebo-controlled clinical trials performed in the U.S. that failed to confirm a benefit of LSESr vs. placebo in LUTS, the global body of the peer-reviewed literature attests not only to efficacy but also to safety. Results will be presented of important trials that compare LSESr to alpha-blockers such as tamsulosin (Flomax®) as well as to 5α-reductase inhibitors such as finasteride (Proscar®) that demonstrate consistent findings of near equivalency between LSESr and these pharmacologic agents. Studies relating data indicative of an additive effect or synergy between LSESr and tamsulosin will be presented as well. The heightened effectiveness of LSESr in men with severe LUTS vs. moderate LUTS expands the importance of our scrutinization of the global literature concerning LSESr. Of great consequence are the contributions of non-English language peer-reviewed publications that have consistently provided evidence of LSESr efficacy in treating LUTS/BPH. These peer-reviewed articles have shown that the effect of LSESr is not that of a placebo. Finally, a comparison of the LSESr extraction products used in the treatment of LUTS, and a discussion of the milieu factors that affect the natural history of LUTS and influence the outcome of clinical trials complete this sedulous analysis of LSESr vs. LUTS.

Given the extent of this global analysis, this report will be presented in three sections. Part I will introduce LUTS. What are the demographics of LUTS? What symptoms are assessed by LUTS and how do we quantify LUTS? Why would a non-prescription item be a valuable consideration in LUTS treatment versus other treatment options? What is basic information about Serenoa repens and what defines a standardized LSESr product? What are the published trials that have affected the acceptability of Serenoa repens in the treatment of LUTS? Finally, a major portion of Part I will discuss the four major reviews of Serenoa repens versus LUTS that have influenced how it is accepted in the USA, in Europe, and other parts of the world. Part I, therefore, lays the groundwork and is foundational for the important findings relating to LUTS and Serenoa repens that will be presented in Parts II and III.

Part I of this 3-part series provided the groundwork for understanding the role of a standardized lipidosterolic extract of Serenoa repens (LSESr) in the treatment of LUTS. It documented that a treatment having a high therapeutic index (i.e., a ratio of benefit to adverse reactions) is a critical need in the demographic context of a rapidly growing elder population. Part I described the clinical symptomatology of LUTS and how it is quantified. A critique of the reports from four authoritative bodies: the European Scientific Cooperative on Phytotherapy (ESCOP), Cochrane 2012, the European Medicines Agency (EMA), and the AUA (American Urological Association) was presented. The foundation above then fine-tuned our search to require (a) consistent evaluability criteria, (b) the quantification of clinical findings, (c) the need to focus on studies employing a standardized LSESr product meeting the fatty acid profile set forth by the European Medicines Agency (EMA) and the US Pharmacopeia and (d) a global assessment of scientific investigations published in all languages and not limited to only English. Part II details the following “new” findings when LSESr vs. LUTS is examined with the above constraints.

Angiogenesis is a critical physiological response to ischemia but becomes pathological when dysregulated and driven excessively by inflammation. We recently identified a novel angiogenic role for tripartite-motif-containing protein 2 (TRIM2) whereby lentiviral shRNA-mediated TRIM2 knockdown impaired endothelial angiogenic functions in vitro. This study sought to determine whether these effects could be translated in vivo and to determine the molecular mechanisms involved. CRISPR/Cas9-generated Trim2–/– mice that underwent a periarterial collar model of inflammation-induced angiogenesis exhibited significantly less adventitial macrophage infiltration relative to wildtype (WT) littermates, concomitant with decreased mRNA expression of macrophage marker Cd68 and reduced adventitial proliferating neovessels. Mechanistically, TRIM2 knockdown in endothelial cells in vitro attenuated inflammation-driven induction of critical angiogenic mediators, including nuclear HIF-1α, and curbed the phosphorylation of downstream effector eNOS. Conversely, in a hindlimb ischemia model of hypoxia-mediated angiogenesis, there were no differences in blood flow reperfusion to the ischemic hindlimbs of Trim2–/– and WT mice despite a decrease in proliferating neovessels and arterioles. TRIM2 knockdown in vitro attenuated hypoxia-driven induction of nuclear HIF-1α but had no further downstream effects on other angiogenic proteins. Our study has implications for understanding the role of TRIM2 in the regulation of angiogenesis in both pathophysiological contexts.

The efficient recognition and classification of personal protective equipment are essential for en-suring the safety of personnel in complex industrial settings. Using the existing methods, manually performing macro-level classification and identification of personnel in intricate spheres is tedious, time-consuming, and inefficient. The availability of several artificial intelligence models in recent times presents a new paradigm shift in object classification and tracking in complex settings. In this study, several compact and efficient deep learning model architectures are explored, and a new efficient model is constructed by fusing the learning capabilities of the individual, efficient models for better object feature learning and optimal inferencing. The new model construct follows the contributory learning theory whereby each fussed model brings its learned features, which are then combined to obtain a more accurate and rapid model using normalized quantization-aware learning. During the investigation, a separable convolutional driven model was constructed as a base model, and then the various efficient architectures combined for the rapid identification and classification of the various hardhat classes used in complex industrial settings. A remarkable rapid classification and accuracy were recorded with the new resultant model.

School-aged children may benefit from education interventions focused on healthy eating and physical activity to improve their quality of life. This article aims to review scientific evidence on food and nutrition education (FNE) in Spanish-speaking countries for the prevention of overweight and obesity in school-aged children (6-12 y). Articles were searched between April and August 2021. The searches were conducted using MEDLINE, Google Scholar, and SciELO. The primary search for articles focused on the experience of FNE interventions in Spanish-speaking countries. Overall, 518 articles were found and 33 studies were eligible for data extraction. Forty-two percent of the studies had a focus on FNE and 64% were focused on describing the eating habits of schoolchildren. Nutritional assessments (anthropometric) were found frequently with 91% and 30% of the studies focused on physical activity. All interventions focused on preventing or reducing overweight and obesity in school-age children. Educational, cognitive, dietary, and physical activity practices were described, whit being educational the most frequent intervention. Interventions reported positive effects of FNE interventions to improve knowledge and practices of healthy lifestyles in school-age children.

Hydrogels have gained significant attention as vehicles for transdermal delivery systems. These polymeric-structured substances have been implemented in pharmaceutical and cosmetic applications. Many factors are employed in their preparation. Light, pH, temperature and specific molecules ligands are commonly used in the production of hydrogels. The Transdermal delivery system (TDD) is a widely used route, used to deliver actives/drugs via the skin. Hydrogels as a TDD have been shown to be efficient in enhancing the efficacy in delivering the actives and drugs. The aim of this review is to discuss the hydrogels application in both dermatological therapeutic and cosmetic applications, covering the types, and properties of hydrogel polymer networks. Furthermore, this review presents one of the most extensively used polymers (Hyaluronic acid HA) in this field and discusses the properties, preparation methods and applications of HA hydrogel patches as a delivery system, including methods of loading the actives and the releasing of these actives from them.

Real-time multi-axis distributed tactile sensing is a critical capability if robots are to perform stable gripping and dexterous manipulation, as it provides crucial information about the sensor-object interface. In this paper, we present an optical-based 6-axis tactile sensor designed in a fingertip shape for robotic dexterous manipulation. The distributed sensor can precisely estimate local XYZ force and displacement at ten distinct locations, and provide global XYZ force and torque measurements. Its compact size, comparable to that of a human thumb, and minimal thickness allow seamless integration onto existing robotic fingers, eliminating the need for complex modifications to the gripper. The proposed sensor design uses a simple, low-cost fabrication method. Moreover, the optical transduction approach uses light angle and intensity sensing to infer force and displacement from deformations of individual sensing units that form the overall sensor, providing distributed 6-axis sensing. The local force precision at each sensing unit in the X, Y, and Z axes is 20.89 mN, 19.19 mN, and 43.22 mN, respectively, over an local force range of approximately ±1.5 N in X and Y and 0 to -2 N in Z. The local displacement precision in the X, Y and Z axes is 56.70 μm, 50.18 μm and 13.83 μm, respectively, over a local displacement range of ±2 mm in the XY directions and 0 to -1.5mm in Z (i.e., compression). Additionally, the sensor can measure global torques, Tx, Ty and Tz, with a precision of of 1.90 N-mm, 1.54 N-mm and 1.26 N-mm, respectively. The fabricated design is showcased by integrating it with an OnRobot RG2 gripper and illustrating real-time measurements during in simple demonstration task which generate changing global forces and torques.

Overweight and Obesity (Ow/Ob) is a risk factor for developing cardiometabolic disease, and metabolic dysfunction. Dietary interventions, such as caloric restriction (CR), have been explored but little is known about the acute effects of CR and often such diets are not standardized. PURPOSE: To assess the impact of a standardized 3-day CR diet (~590kcal/d) on cardiometabolic health and fat metabolism in Ow/Ob individuals. METHODS: Fifteen Ow/Ob men and women were assessed pre-post 3-day CR using standardized diet; specifically, body weight/composition (% body fat, visceral fat score (Vfs), waist-hip circumferences, blood pressure and vascular stiffness, resting energy expenditure (REE), substrate utilization (respiratory quotient, RQ), and blood glucose/lipid profile. RESULTS: CR induced changes in body weight (93.1±15.2 to 90.67±14.4 kg, p<0.001, d=1.9), body mass index (32.9±4.0 to 32.0±3.7 kg/m2, p<0.001, d=1.4), body fat (37.2±7.5 to 35.8±7.5%, p=0.002, d=1.1) and Vfs (13.1±4.5 to 12.2±3.9 a.u., p=0.002, d=1.1), but not body water (46.3±3.6 to 46.0±3.6%, p=0.29, d=0.3). CR had no effect on peripheral (86±5 to 89±5 mmHg, p=0.23, d=0.3) or central mean arterial pressure (86±5 to 87±6 mmHg, p=0.44, d=0.2), but lowered augmentation index (29.8±17.5 to 21.5±14.5%, p=0.05, d=0.6). Blood glucose (86±7 to 84±11 mg/dl, p=0.33, d=0.3) and blood lipids (total cholesterol (196±49 to 203±54 mg/dl, p=0.16, d=0.4) and TC/HDL (4.9±2.4 to 6.1±4.7, p=0.13, d=0.4)) were unchanged. RQ decreased with CR (0.84±0.01 to 0.76±0.00, p<0.001, d=1.9), though REE was unchanged (1718±274 to 1722±317 kcal/d, p=0.83, d=0.1). CONCLUSION: The 3-day CR significantly improved body weight and composition and fat metabolism, with minimal cardiovascular effects.

Tracking the kinematics of human movement usually requires the use of equipment that constrains the user within a room (e.g., optical motion capture systems), or requires the use of a conspicuous body-worn measurement system (e.g., inertial measurement units (IMUs) attached to each body segment). This paper presents a novel Lie group constrained extended Kalman filter to estimate lower limb kinematics using IMU and inter-IMU distance measurements in a reduced sensor count configuration. The algorithm iterates through the prediction (kinematic equations), measurement (pelvis height assumption/inter-IMU distance measurements, zero velocity update for feet/ankles, flat-floor assumption for feet/ankles, and covariance limiter), and constraint update (formulation of hinged knee joints and ball-and-socket hip joints). The knee and hip joint angle root-mean-square errors in the sagittal plane for straight walking were 7.6±2.6∘ and 6.6±2.7∘, respectively, while the correlation coefficients were 0.95±0.03 and 0.87±0.16, respectively. Furthermore, experiments using simulated inter-IMU distance measurements show that performance improved substantially for dynamic movements, even at large noise levels (σ=0.2 m). However, further validation is recommended with actual distance measurement sensors, such as ultra-wideband ranging sensors.

A series of (benzoimidazol-2-ylmethyl)amine palladium(II) complexes have been employed as catalysts in the homogenous hydrogenation of alkenes and alkynes under mild conditions. A correlation between the catalytic activity and the nature of the ligand was established. Kinetic studies of the hydrogenation reactions of styrene established pseudo-first-order dependence on styrene substrate. On the other hand, partial orders with respect to H2 and catalyst concentrations were obtained consistent with the formation of palladium(II) monohydride species as the active species. The nature of the solvent used influenced the hydrogenation reactions, where coordinating solvents resulted in lower catalytic activities. Density functional theory investigations provided valuable insights into the reactivity trends and influence of complex structure on the hydrogenation reactions.

Chronic wounds are associated with considerable patient morbidity and present a significant economic burden to the healthcare system. Often, chronic wounds are in a state of persistent in-flammation and unable to progress to the next phase of wound healing. Placental-derived bio-materials are recognized for their biocompatibility, biodegradability, angiogenic, an-ti-inflammatory, anti-microbial, anti-fibrotic, immunomodulatory, and immune privileged prop-erties. As such, placental-derived biomaterials have been used in wound management for more than a century. Placental-derived scaffolds are composed of an extracellular matrix (ECM) that can mimic the native tissue, creating a reparative environment to promote ECM remodeling, cell migration, proliferation, and differentiation. Reliable evidence exists throughout the literature to support the safety and effectiveness of placental-derived biomaterials in wound healing. How-ever, differences in source (i.e., anatomical regions of the placenta), preservation techniques, decellularization status, design, and clinical application have not been fully evaluated. This re-view provides an overview of wound healing and placental-derived biomaterials, summarizes the clinical results of placental-derived scaffolds in wound healing, and suggests directions for future work.

AbstractLocal estimates of coastal flood risk are required for coastal planning and development, including the location and design of sea-defences and coastal buildings, such as harbours and associated infrastructure. This paper discusses the use of three parameters associated with estimating such risks; the flood return period, the instantaneous flood probability and the flood design risk, and it describes the mathematical background for their derivation. The discussion is extended to include the effects of sea level rise and how it can be incorporated into the calculations. Flood height can vary quite rapidly with distance along the coast, being affected by coastal topology, which may magnify or diminish the tidal and surge effects. Similarly land heave influences the local effects of sea level rise and can be influenced by water extraction, tectonic movements and melting ice. Tide gauge measurements provide a local historical record from which the various parameters can be retrieved. This paper discusses the algorithms used to derive these measures from tide-gauge records. The figures have been derived for four tide gauges located on the UK east coast.

What is the ideal soil-grass combination for maximum photosynthesis? In this study, we investigated how soil and grassland types affect photosynthesis in the grasslands of Gannan, China. We divided the grasslands of Gannan into 166 study sites, each with a unique soil-grass combination by intersecting the soil and ecoregion maps using ArcGIS. We obtained 19 years of data on the Net Photosynthesis (PsnNet) of grasslands in the area from 2000 to 2018 and then divided them into “growing season” (June to September) and “non-growing season” (October top May). Between 2000 and 2018, PsnNet of grasslands showed a gradually increasing trend. The effect of soil type on PsnNet was not significant during the growing season. However, it was highly significant during the non-growing season. Among the soil types, grasses that grew in Mollic, Gelic, and Haplic soils had the highest rate of photosynthesis. The difference in PsnNet among the various grass types was highly significant during both seasons. However, Tropical and Subtropical succulent evergreen broad-leaf shrubs and Temperate meadows had the highest rate of photosynthesis. Additionally, there was a highly significant difference in PsnNet among the various soil-grass interactions. In the growing season, TStEgBLS growing Eutric soils had the highest PsnNet. However, SaDBLS growing in Gelic soils had the the highest.

Asphaltene precipitation and deposition pose significant operational challenges in both reservoirs and surface facilities by inducing formation damage. To understand the kinetics involved in asphaltene particle nucleation, growth, and aggregation, this study employed confocal microscopy and centrifuge-based methods under a unified set of experimental parameters. The acquired time-resolved particle size images were analyzed using MIPAR image processing software, while asphaltene mass yield was quantitatively evaluated through centrifugation. Experimental conditions were varied to study the effects of heptane concentration, asphaltene concentration, and shear rate. Notably, this investigation introduces, for the first time, the parameter of particle count as an additional variable influencing asphaltene mass production. This study aims to discern how particle count correlates with asphaltene mass yield over time. Results indicate that the minimum mean particle diameter was observed to be 2 microns, which progressively grew up to 80 microns. The mean particle diameter exhibited a positive correlation with both asphaltene concentration and shear rate, whereas an inverse correlation was seen with heptane concentration. Furthermore, the asphaltene mass yield was found to increase with greater asphaltene and heptane concentrations, as well as with higher shear rates. The relationship between mean particle diameter and mass yield was found to be nonlinear. In the early stages, a higher prevalence of small particles contributed to a greater total particle count, while at later stages, particle aggregation led to the formation of larger particles that influenced the overall asphaltene mass. The insights gained from understanding the relationship between particle diameter, count, and mass yield are crucial for advancing the fundamental science of asphaltene precipitation and deposition. These findings may also guide future research that relies solely on particle counts for assessing asphaltene deposition.

Despite the Hebrides and Cleveland basins being geographically close, research has not previously been carried out to determine faunal similarities and assess the possibility of links between the dinosaur populations. The palaeogeography of both areas during the Middle Jurassic shows that there were no elevated landmasses being eroded to produce conglomeratic material in the basins at that time. The low-lying landscape and connected shorelines may have provided connectivity between the two dinosaur populations. The dinosaur fauna of the Hebrides and Cleveland basins has been assessed based primarily on the abundant ichnites found in both areas as well as their skeletal remains. In the two basins the dinosaur faunas are very similar, consisting of non-neosauropod eusauropods, a possible basal titanosauriform, large and small theropods and ornithopods and europodan thyreophorans. The main difference in the faunas is in the sizes. In the Cleveland Basin the ichnites suggest that there were medium and large theropods alongside small to medium sized ornithopods whereas in the Hebrides Basin the theropods were from small to large and the ornithopods were medium to large. It is suggested that migrations could have taken place between the two areas during the Middle Jurassic. A tentative food chain from the herbivorous dinosaurs to the top predators can be inferred from the footprints.

A novel means of applying radiotherapy in cancer treatment is the application of the radiation dose at a very high intensity for a very short time, FLASH radiotherapy (FLASH-RT). This technique involves exposure of tumors to >40 Gy/s, usually for less than one second. Studies conducted in cell and preclinical models suggest that FLASH-RT seems less damaging to normal tissues from adverse effects, relative to the same overall dose of radiation administered in conventional therapy (CONV-RT) which involves administration of lower levels of radiation repeated intermittently over a protracted period. In contrast, the susceptibility of tumor tissues to FLASH-RT is not diminished relative to CONV-RT. Within solid tumors both modes of dispensation of radiation produce an equivalent degree of cell damage. This differential between normal and malignant material has been found in isolated tissues, animal studies, and more recently in clinical trials. However, the classical radiation concept is that high energy linear transfer radiation (LET) is more damaging than the equivalent total dose of low LET. Thus, the susceptibility of cells should be greater to short-term exposure to high LET. This article discusses the potential reasons that may account for this discrepancy. While the relative protection given to untransformed tissues by FLASH-RT relative to tumor tissue is a major step forward in radiation therapy of cancer, the processes that lie behind this phenomenon are incompletely understood and are considered here.

The demand for improving the nuclear waste management has since long been identified as one of the major hurdles for widespread use of nuclear energy. Nuclear waste management, through partitioning and transmutation (P&T) has been researched since the 1990ies with partitioning being a pre-requisite for the process. Recently, an innovative approach of reactors directly operating on spent nuclear fuel, iMAGINE, has been proposed which could deliver on the aims of P&T as a side effect to more efficient nuclear energy production in the future. The results shown here confirm that it is possible to achieve the aims of P&T without prior partitioning, but it is certainly less efficient since the high concentration of MAs, required for efficient burning, are impossible to obtain in a short operational time. The proposed nuclear waste management approach will be a long-term effort when it is accomplished without partitioning/separation technologies. However, none of the analyses contradicts this effort – the key points are a) when the technology for treating the waste is possible and reliable, the time horizon will not be a major concern b) the waste management is now intrinsically linked with energy production instead of requiring dedicated costly facilities, delivering a promising economic basis c) the waste management is now associated with long-term energy production and massively improved resource utilization. In summary, the objectives of P&T are achievable without prior partitioning – this is a ground-breaking result. However, the approach will require continued nuclear energy production for a very long time. In case of a nuclear phase-out decision, a much more efficient transmutation scenario would have to be envisaged as already discussed several years ago for Germany.

Earth’s extinction crisis is escalating, and threat classification schemes are increasingly important for assessing which human activities are the most prominent drivers of species declines. However, a quantitative understanding of the conservation responses needed to abate threatening processes, and avoid species extinctions, is often lacking. Here, we provide a threat abatement framework which groups threats based on the shared conservation goal of the actions needed to abate their impact. We apply this framework to Australia’s threatened species to quantify the relative importance of achieving different conservation response goals. Our analysis shows the most important conservation responses across Australia are habitat retention and restoration, due to the combined impact of threatening processes causing habitat destruction and degradation (e.g. logging, mining, urbanisation and agriculture), which affects the majority (86%) of Australia’s threatened species and the effective control of invasive species (82%). Most species also require conservation responses focussed on improved fire management (66%). We show that implementing responses in isolation will be inadequate for abating species extinctions as almost all species (89%) require multiple, integrated management responses to redress their threats. We also acknowledge that already small and potentially genetically compromised taxa may require more direct interventions (e.g. captive insurance populations or genetic rescue). Our analysis highlights the necessity of addressing multiple threats at appropriate geographic scales across Australia. Our threat abatement framework ensures that core conservation actions can be identified and aid recovery of threatened species, and can be applied to other geographic regions and conservation contexts.

Perovskite Solar Cell (PSC) is a third-generation photovoltaic device known for its rapid improvement in efficiency levels over the past decade. Moreover, the added benefits of abundant sourcing of raw materials, uncomplicated fabrication process, organic and inorganic device materials, and tuneable bandgaps make this technology a sustainable energy alternative. However, the efficiency values of these devices are subjected to variation depending on factors such as material compatibility, environmental conditions, energy band alignment of device components and stability characteristics to extrinsic and intrinsic factors. One such vital intrinsic factor is film morphology, homogenous and superior film quality formation and pinhole and trap-free films. In this study, we have investigated the formation of perovskite films on a qualitative basis using metal chloride washing of salts such as Erbium, Antimony, Cadmium and Chromium Chloride. The study aims to analyse the difference in film formation with various metal chloride washing and how this could potentially impact or contribute to photovoltaic performance if the devices are fabricated.

In developing countries today, population growth and the penetration of higher standard of living appliances in homes has resulted in a rapidly increasing residential load. In South Africa, the recent rolling blackouts and electricity price increase only highlighted this reality calling for sustainable measures to reduce the overall consumption and peak load. The dawn of the smart grid concept, embedded systems and ICTs have paved the way to novel HEMS design. In this regard, the Internet of Things (IoT), an enabler for smart and efficient energy management systems is seeing increasing attention for optimizing HEMS design and mitigate its deployment cost constraints. In this work, we propose an IoT platform for residential energy management applications focusing on interoperability, low-cost, technology availability and scalability. We focus on the backend complexities of IoT Home Area Networks (HAN) using the OCF IoTivity-Lite middleware. To augment the quality, servicing and reduce cost and complexities, this work leverages open-source Cloud technologies from Back4App as BaaS to provide consumer and Utilities with a data communication platform within an experimental study illustrating time and space agnostic “mind-changing” energy feedback, Demand Response Management (DRM) and appliance operation control via a HEM App via an Android smartphone.

Despite advancements in antiretroviral therapy (ART) that reduces the viral load to undetectable levels, viral eradication has not been achieved due to HIV-1 persistence in resting CD4+ T-cells. We, therefore, characterized the tat gene, which is essential for HIV-1 replication, from 20 viro-logically controlled HIV-infected (HIV+) older patients on long-term ART with improved CD4+ T-cell counts. PBMC genomic DNA from HIV+ patients were used to amplify tat gene by PCR fol-lowed by nucleotide sequencing and analysis. Phylogenetic analysis showed that each patient’s tat sequences were confined to their own subtrees and well discriminated from other patients’ sequences. Moreover, there was a low degree of viral heterogeneity and lower estimates of genetic diversity within these patients’ tat sequences. Most patients’ Tat deduced amino acid sequences showed intact open reading frames and maintained the important functional domains for Tat functions, including transactivation, TAR binding and nuclear localization. Furthermore, Tat deduced amino acid sequences showed variation in previously characterized cytotoxic T lym-phocytes (CTL) epitopes, suggesting escape mutants. In conclusion, a low degree of genetic varia-bility and conservation of functional domains and variations in CTL epitopes were the features of tat sequences from 20 HIV+ older patients with undetectable viral load on long-term ART.

In the manufacturing industry, cutting tool failure is a probable fault which causes damage to the cutting tools, workpiece quality and unscheduled downtime. It is very important to develop a reliable and inexpensive intelligent tool wear monitoring system for use in cutting processes. A successful monitoring system can effectively maintain machine tools, cutting tool and workpiece. In the present study, the tool condition monitoring system has been developed for Die steel (H13) milling process. Effective design of experiment and robust data acquisition system ensured the machining forces impact in the milling operation. Also, ANFIS based model has been developed based on cutting force-tool wear relationship in this research which has been implemented in the tool wear monitoring system. Prediction model shows that the developed system is accurate enough to perform an online tool wear monitoring system in the milling process.

Traditionally there is a gap between reactor operation and the consideration of nuclear waste in the final disposal. Fuel is produced and fuel must be disposed of in the view of the reactor operator, fuel has to be cleaned in the reprocessing and new solid fuel has to be produced in the view of the chemist. iMAGINE is designed to overcome this separation through the breakthrough development applying an optimized, integrative approach from cradle to grave of nuclear energy production as a first step to come as close as possible to the vision of zero waste nuclear power. It is described here the first time all in three the steps: reactor, fuel cycle, waste, providing the ratio behind each of the choices taken to come to the overall solution to open the discussion and thinking process on what could be achieved by a really innovative approach to integrated nuclear energy production. The opportunities regarding the handling of the remaining waste will be discussed with a view on the expectation of the final disposal community, the study ‘Nuclear waste from small modular reactors’, and the IAEA report ‘waste from innovative types of reactors and fuel cycles - a preliminary study. The aim of the is not to find answers to each of the raised points, but to identify first potential approaches and potentially promising ways to go, as well as to stimulate a discussion among experts. In the best case this could lead to a change of track for nuclear to become an even more sustainable and at least as important, trusted technology to help solve the net-zero challenge.

The lab-on-a-chip concept, enabled by microfluidic technology, promises the integration of multi-ple discrete laboratory techniques into a miniaturised system. Research into microfluidics has generally focused on the development of individual elements of the total system (often with rela-tively limited functionality), without full consideration for integration into a complete fully opti-mised and miniaturised system. Typically, the operation of many of the reported lab-on-a-chip devices is dependent on the support of a laboratory framework. In this paper, a demonstrator platform for routine laboratory analysis is designed and built, which fully integrates a number of technologies into a single device with multiple domains such as fluidics, electronics, pneumatics, hydraulics, and photonics. This facilitates the delivery of breakthroughs in research, by incorpo-rating all physical requirements into a single device. To highlight this proposed approach, this demonstrator microsystem acts as a fully integrated biochemical assay reaction system. The re-sulting design determines enzyme kinetics in an automated process and combines reservoirs, three-dimensional fluidic channels, optical sensing, and electronics in a low-cost, low-power and portable package.

Agricultural productivity is expected to decrease under changing climate conditions that correspond to the stability of West African food systems. Although numerous studies evaluated food production gaps or impacts of climate variability on crop yields, many uncertainties are associated with climate extremes, but also rapid population growth and the corresponding dietary lifestyle determine farming activities. Here, we present a food supply and demand analysis based on the relationship between climate change, crop production, as well as population growth in three experimental sites from southwestern Burkina Faso to southwestern Ghana. The method consists of a tiered approach that encompassed a statistical analysis of historical climate as well as agricultural time series using boxplots and a trend test by Mann-Kendall. Food balance sheets were calculated by estimating the demand using a population growth model linked to food supply with local consumption patterns. Results of the boxplot analysis revealed for the majority of climate time series light to strong right-skewed distributions with either a few heavy rainfall or hot temperature events. We found almost insignificant rainfall and temperature trends for both sites in the Sudano-Guinean savannah. The rainfall regime of southwestern Ghana indicated an insignificant upward or downward trend while the temperature significantly increased over time. Crop yield boxplots demonstrated mainly right-skewed distributions for cereals, legumes and tubers as well as cash crops such as cotton. Backed by the Mann-Kendall test, maize and sorghum significantly enhanced in both study areas of the Sudano-Guinean savannah. Southwestern Ghana depicted a different crop pattern where cassava and plantain showed a strong upward trend at a confidence level of 1%. The grouped food balances sheets across the regions illustrated a surplus for the Sudano-Guinean savannah ranging from 221.2 megatons (Mt) to 4,846.77 Mt while southwestern Ghana exhibited a deficit between -193.33 Mt and -16,188.82 Mt. Despite a growing yield of various crops, food demand outpaces the regional production. Hence, it is recommended to focus on a larger array of commodities, imports and marketing of farm products.

This review examines the categorization of Essentially Derived Varieties (EDV) introduced in the 1991 revision of the Convention of the Union internationale pour la protection des obtentions végétales (UPOV). Challenges in the implementation of the concept and progress made on a crop-by-crop basis to provide greater clarity and more efficient implementation are reviewed. The current approach to EDV remains valid provided i) clarity on thresholds can be achieved including through resource intensive research on an individual crop species basis and ii) that threshold clarity does not lead to perverse incentives to avoid detection of essential derivation. However, technological advances leading to new varieties resulting from the simultaneous introduction or change in expression of more than “a few” genes will so challenge the concept to require a new Convention. Revision could include deletion of the concept of essential derivation and revision on a crop-by-crop basis of the breeder exception. Countries that allow utility patents for individual plant varieties per se should consider removing that possibility unless plant breeders utilize those encouragements for risk taking and investment to broaden the germplasm base upon which the long-term sustainability of plant breeding resides.

Users of meteorological forecasts are often faced with the question of whether to make a decision now based on the current forecast or whether to wait for the next and hopefully more accurate forecast before making the decision. One would imagine that the answer to this question should depend on the extent to which there is a benefit in making the decision now rather than later, combined with an understanding of how the skill of the forecast improves, and information about the possible size and nature of forecast changes. We extend the well-known cost-loss model for forecast-based decision making to capture an idealized version of this situation. We find that within this extended cost-loss model, the question of whether to decide now or wait depends on two specific aspects of the forecast, both of which involve probabilities of probabilities. For the special case of weather and climate forecasts in the form of normal distributions we derive a simulation algorithm, and equivalent analytical expressions, for calculating these two probabilities. We apply the algorithm to forecasts of temperature and find that the algorithm leads to better decisions relative to three simpler alternative decision-making schemes. Similar problems have been studied in many other fields, and we explore some of the connections.

Soil and Water Assessment Tool (SWAT) was used to simulate five glacierized river basins that are global in coverage and vary in climate. The river basins included the Narayani (Nepal), Vakhsh (Central Asia), Rhone (Switzerland), Mendoza (Central Andes, Argentina), and Central Dry Andes (Chile) with a total area of 85,000 km2. A modified SWAT snow algorithm was applied in order to consider spatial variation of associated snow melt /accumulation by elevation band across each subbasin. In the previous studies, melt rates varied as a function of elevation resulting from an air temperature gradient while the snow parameters were constant throughout the entire basin. A major improvement of the new snow algorithm is separating the glaciers from seasonal snow based on their characteristics. Two SWAT snow algorithms were evaluated in simulation of monthly runoff from glaciered watershed: 1) the snow parameters are lumped (i.e. constant throughout the entire basin) and 2) the snow parameters are spatially variable based on elevation band-subbasin (i.e. modified snow algorithm). Applying the distributed SWAT snow algorithm improved the model performance in simulation of monthly runoff with snow-glacial regime, so that mean RSR decreased to 0.49 from 0.55 and NSE increased to 0.75 from 0.69. Improvement of model performance was negligible in simulation of monthly runoff from the basins with monsoon runoff regime.

Arguably the most important parameter in treating cognitive decline associated with Alzheimer’s disease is the length of time in which improvement, if achieved at all, is sustained. However, monotherapies such as donepezil and memantine are associated with a more rapid decline than no treatment in patients over multi-year follow-ups {Kennedy, 2018 #535}. Furthermore, anti-amyloid antibody treatment, which at best simply slows decline, is associated with accelerated cerebral atrophy [2], resulting in earlier dementia-associated brain volumes for those treated at the MCI stage than untreated patients. In contrast, a precision medicine approach, in which the multiple potential drivers of cognitive decline are identified for each patient and then targeted with a personalized protocol (such as ReCODE), has led to documented improvement in patients with cognitive decline [3]; [4]; [5], but long-term follow-up (>5 years) has not been reported previously. Therefore, we report here sustained cognitive improvement, in some cases for over a decade, in patients treated with a precision medicine protocol—something that has not been reported in patients treated with anti-cholinesterase, glutamate receptor inhibitory, anti-amyloid, or other therapeutic methods. These case studies warrant long-term cohort studies to determine how frequently such sustained cognitive improvements occur in patients treated with precision medicine protocols.

Background: Shared value creation in Base of the Pyramid (BoP) communities is a crucial process towards building sustainable societies. BoP communities in developing countries represent more than four billion people who live on low incomes with limited access to basic products and services. Current or emerging technologies offer promising solutions for organisations pursuing manufacturing opportunities in BoP communities. This study seeks to explore the literature on how BoP communities may become active participants in sustainably manufacturing products using micro-manufacturing factories. The research question posed is: What are the core concepts that need to be taken into consideration for creating shared value through micro-manufacturing factories in BoP communities? Method: A Systematised Literature review (SLR) was completed following the Preferred Reporting Items for Systematic reviews and Meta-Analysis (PRISMA) method for data selection criteria and analysis. The SLR is used to explore the state of literature with regards to creating manufacturing shared value in BoP communities with the objective to identify study gaps and to explore shared value creation concepts. Results: Literature indicates BoP initiatives that have pursued to engage BoP communities through various innovation strategies. The findings of the review is organised under three strategic pillars: Capability building strategy, Implementation process, and Growth strategy. The capability building strategy defines the users’ intention to create shared value in BoP communities with Micro-manufacturing factories (MMF). It is followed by the implementation process which guides the users to create manufacturing shared value in BoP communities. This is followed by a growth strategy to scale for impact.

Extensive genome structure variation, such as copy number variations (CNVs) and presence/absence variations, is the basis for the remarkable maize genetic diversity; however, the effect of CNVs on maize herbivory defense remains largely underexplored. Here, we report that the naturally occurring duplication of the maize 9-lipoxygenase gene, ZmLOX5, leads to increased resistance of maize to herbivory by fall armyworms (FAW). Previously, we showed that ZmLOX5-derived oxylipins are required for defense against chewing insect herbivores and identified several inbred lines, including Yu796, that contained duplicated CNVs of ZmLOX5, referred to as Yu796-2×LOX5. To test whether introgression of the Yu796-2×LOX5 locus into the herbivore-susceptible B73 background that contains a single ZmLOX5 gene is a feasible approach to increase resistance, we generated a series of near-isogenic lines that contained either 2, 1 or 0 copies of the Yu796-2×LOX5 locus in the B73 background by six back crosses (BC6). Droplet digital PCR (ddPCR) confirmed the successful introgression of the Yu796-2×LOX5 locus in B73. The resulting B73-2×LOX5 inbred line displayed increased resistance against FAW associated with increased expression of ZmLOX5, increased wound-induced production of its primary oxylipin product, the α-ketol, 9-hydroxy-10-oxo-12(Z),15(Z)-octadecadienoic acid (9,10-KODA), and the downstream defense hormones regulated by this molecule, 12-oxo-phytodienoic acid (12-OPDA) and abscisic acid (ABA). Surprisingly, wound-induced JA-Ile production was not increased in B73-2×LOX5, resulting from the increased JA catabolism. Furthermore, B73-2×LOX5 displayed enhanced drought tolerance likely due to increased ABA and 12-OPDA content. Taken together, this study revealed that the duplicated CNV of ZmLOX5 quantitively contributes to maize antiherbivore defense and presents proof-of-concept evidence that the introgression of naturally occurring duplicated CNVs of a defensive gene into the productive, but susceptible, crop varieties is a feasible breeding approach for enhancing plant resistance to herbivory and tolerance to abiotic stress.

Multi-morbidity and polypharmacy are common in older people and pose a challenge for health and social care systems especially in context of global population ageing. They are complex and interrelated concepts in the care of older people that require early detection and patient centred decision making that are underpinned by the principles of multidisciplinary led comprehensive geriatric assessment (CGA). Personalised care plans need to remain responsive and adaptable to the needs of a patient, enabling an individual to maintain their independence.

Nuclear technologies have the potential to play a major role in the transition to a global net-zero society. Their primary advantage is the capability to deliver controllable 24/7 energy on demand. However, as a prerequisite for successful worldwide application, significant innovation will be required to create the nuclear systems of the 21st century, the need of the hour. The pros and cons of nuclear are discussed and analysed at different levels – the societal and public recognition as well as the scientific/engineering and economic level – to assure a demand driven development. Based on the analysis of the different challenges a vision for the nuclear system of the 21st century is synthesised consisting of three pillars – unlimited nuclear energy, zero waste nuclear, and accident free nuclear. These three combined visions are then transformed into dedicated and verifiable missions which are discussed in detail regarding challenges and opportunities. In the following a stepwise approach for the development of such a highly innovative nuclear system is described. Essential steps to assure active risk reduction and the delivery of quick progress are derived as answer to the critique on the currently observed extensive construction time and cost overruns on new nuclear plants. The 4-step process consisting of basic studies, experimental zero power reactor, small scale demonstrator, and industrial demonstrator is described. The 4 steps including sub-steps deliver the pathway to a successful implementation of such a ground breaking new nuclear system. The potential sub-steps are discussed with the view not only onto the scientific development challenges, but also as an approach to reduce the regulatory challenges of a novel nuclear technology.

Soil-borne Trichoderma spp. have been extensively studied for their biocontrol activities against pathogens and growth promotion ability with plants. However, the beneficial effect of Trichoderma on inducing resistance against insect herbivores has been considered only recently. Among diverse Trichoderma species, consistent with previous reports, we showed that root colonization by T. virens triggered induced systemic resistance (ISR) to leaf-infecting fungal pathogens. Whether T. virens induces ISR to insect pests has not been tested before. In this study, we investigated whether T. virens affects jasmonic acid (JA) biosynthesis and defense against fall armyworm (FAW) and western corn rootworm (WCR). Unexpectedly, the results showed that T. virens colonization of maize seedlings grown in autoclaved soil suppressed wound-induced production of JA, resulting in reduced resistance to FAW. Similarly, the bacterial endophyte Pseudomonas chlororaphis 30-84 suppressed systemic resistance to FAW due to reduced JA. Further comparative analyses of the systemic effects of these endophytes when applied into sterile or non-sterile field soil showed that both T. virens and P. chlororaphis 30-84 triggered ISR against hemibiotrophic fungal pathogen Colletotrichum graminicola in both soil conditions, but only suppressed resistance to FAW in sterile soil. In contrast to the effect on FAW defense, T. virens colonization of maize roots suppressed WCR larvae survival and weight gain. This is the first report suggesting the potential role of T. virens as a biocontrol agent against WCR.

Background/Purpose: Over the last two decades, malaria has remained a major worldwide public health concern, especially in the developing countries leading to high morbidity and mortality among children. Nigeria is the world most burdened malaria endemic nation, contributing more than a quarter of global malaria cases. This study determined the prevalence of malaria among children 6-59 months in Nigeria, and the effects of individual and contextual factors. Methods: The study utilized data from 2018 Nigeria Demographic and Health Survey (NDHS) involving a weighted sample size of 10,185 children who were tested for malaria using rapid diagnostic test (RDT). Given the hierarchical structure of the data set, such that children at level-1 are nested in community at level-2, and nested in states and Federal Capital Territory (FCT) at level-3, multilevel mixed effect logistic regression models were used for the analysis. Results: The proportion of children 6-59 months of age in Nigeria that had malaria fever positive as assessed by RDTs was 35.5% (3,418/10185), (CI: 33.9-37.1). Kebbi State had the highest proportion of children 6-59 months who were malaria positive, 77.6%, (CI: 70.2-83.5), followed by Katsina State, 55.5%, (CI: 47.7-63.1). The Federal Capital Territory (FCT), Abuja had the proportion of 29.6%, (CI: 21.6-39.0), malaria positive children of 6-59 months of age. Children between the age of 48 and 59 months were 2.68 times more likely to have malaria fever than children 6-11 months of age (AOR=2.68, 95% CI: 2.03-3.54). Also, children from the rural area (AOR= 2.12, 95% CI: 1.75-2.57), were more likely to suffer from malaria infection compare with children from urban area. Conclusion: The study identified some individual and contextual predictors of malaria among children in Nigeria. These factors are areas that need to be considered for policy designs and implementations toward control and total elimination of malaria-related morbidity and mortality among children in Nigeria.

Turbidity stands as a crucial indicator for assessing water quality, and while turbidity sensors exist their high cost prohibit their extensive use. In this paper, we introduce an innovative turbidity sensor, and it is the first low-cost turbidity sensor which is designed specifically for long-term stormwater in-field monitoring. Its low cost ($23.50 USD), enables the implementation of high spatial resolution monitoring schemes. The sensor design is available under open hardware and open-source licences, and the 3D-printed sensor housing is free to modify based on different monitoring purposes and ambient conditions. The sensor was tested both in the laboratory and in the field. The laboratory results show a strong linear relationship (R2 > 0.99) between the sensor readings and the commercial hand-held turbidimeter (Thermo Scientific AQ4500) results of the solution. In the field, the low-cost sensor measurements were statistically significantly correlated (p < 0.01) to a standard high-cost commercial turbidity sensor (GreenSpan TS-1000). Biofouling and drifting issues were also analysed after the sensors were deployed in the field for more than 6 months, showing both biofouling and drift occur during monitoring. Nonetheless, in terms of maintenance requirements, the low-cost sensor exhibited similar needs compared to the Green-Span sensor.

Remote video imagery using shoreline edge detection is widely used in coastal monitoring in order to acquire measurements of nearshore and swash processes. Some of these systems have very limited flexibility due to their rigid structures and require considerable investment in hardware. As such, there is a need for an autonomous low-cost system (~€500) that can be rapidly deployed in the field, while still producing the outcomes required for coastal monitoring. This research presents a sensitivity analysis of time-lapse intervals for two low-cost cameras located in a remote coastal area, overlooking a dissipative beach-dune system. The analysis shows that RMSD in the detected shoreline is similar to other studies for intervals ranging between 1 second and 30 seconds (i.e., RMSDmax for Camera 1 = 2.8 m and Camera 2 = 1.3 m). The increase of the sampling interval from 1 s to 30 s is shown to have no significant adverse effect on the precision of shoreline detection. The research found that the limitations of battery life and memory storage substantially decrease when sampling intervals increase without an effect on the data quality. This also has a positive effect for low-cost systems and removes the requirement for external battery and memory storage. On the systems used, the battery life increased from ~10 days to ~100 days when the sampling interval was increased from 1 to 5 s., As such, the current standard of producing Timex images from 1 s sampling intervals over 10 minutes can be changed depending on the application and requirements needed for analysis.

We present a modified version of the Szilard Engine, demonstrating that an explicit measurement procedure is entirely unnecessary for its operation. By considering our modified engine, we are able to provide a new interpretation of Landauer’s original argument for the cost of erasure. From this view, we demonstrate that a reset operation is strictly impossible in a dynamical system with only conservative forces. Then, we prove that to approach a reset yields an unavoidable instability at the reset point. Finally, we present an original proof of Landauer’s principle that is completely independent from the Second Law of Thermodynamics.

Generating long-lived mucosal and systemic antibodies through respiratory immunization with protective antigens encapsulated in nanoscale biodegradable particles could potentially decrease or eliminate the incidence of many infectious diseases but requires incorporation of a suitable mucosal immunostimulant. We previously found that respiratory immunization with a model protein antigen (LPS-free OVA) encapsulated in PLGA 50:50 nanoparticles (~380 nm diameter) surface modified with complement peptide-derived immunostimulant 02 (CPDI-02; formerly EP67) through 2kDa PEG linkers increases mucosal and systemic OVA-specific memory T-cells with long-lived surface phenotypes in young, naïve female C57BL/6 mice. Here, we determined if respiratory immunization with LPS-free OVA encapsulated in similar PLGA 50:50 microparticles (~1 μm diameter) surface modified with CPDI-02 (CPDI-02-MP) increases long-term OVA-specific mucosal and systemic antibodies. We found that, compared to MP surface modified with inactive, scrambled scCPDI-02 (scCPDI-02-MP), intranasal administration of CPDI-02-MP in 50 μL sterile PBS greatly increased titers of short-term (14 days post-immunization) and long-term (90 days post-immunization) antibodies against encapsulated LPS-free OVA in nasal lavage fluids, bronchoalveolar lavage fluids, and sera of young, naïve female C57BL/6 mice. Thus, surface modification of biodegradable microparticles with CPDI-02 is likely to increase long-term mucosal and systemic antibodies against encapsulated protein antigen after respiratory and possibly other routes of mucosal immunization.

We present a very computationally light and fast approximation algorithm and then verify it with genetic algorithm and simulated annealing. We show that our algorithm is on par with GA and SA in terms of output produced while having a tightly bounded time complexity. Our algorithm works best when there is a strong positive correlation between the reliability of a component and its cost. We present two algorithms with the same essence. One of them is system cost bounded and the other is target reliability bounded. Our proposed algorithm works on a subsystem level redundancy instead of component level redundancy.

A hallmark of Alzheimer’s disease (AD) are the proteinaceous aggregates formed by the amyloid-beta peptide (Aβ) that is deposited inside the brain as amyloid plaques. The accumulation of aggregated Aβ may initiate or enhance pathologic processes in AD. According to the amyloid hypothesis any agent that has the capability to inhibit Aβ aggregation and/or destroy amyloid plaques represents a potential disease modifying drug. In 2023, a humanized IgG1 monoclonal antibody (lecanemab) against the Aβ soluble protofibrils was approved by US FDA for AD therapy thus providing compelling support to the amyloid hypothesis. To acquire a deeper insight on the in vivo Aβ aggregation, various animal models, including aged herbivores and carnivores, non-human primates, transgenic rodents, fish and worms are widely exploited. This review is based on the recent data obtained using transgenic animal AD models and presents experimental verification of the critical role in Aβ aggregation seeding of the interactions between zinc ions, Aβ with the isomerized Asp7 (isoD7- Aβ) and the α4β2 nicotinic acetylcholine receptor.

Purpose Immune responses for cancer cells can be altered according to genetic variation of human leukocyte antigen (HLA). Association of HLA polymorphism with risk of various cancer types is well known. However, the association between HLA and glioblastoma (GBM) remains uncertain. We sought to evaluate the association of HLA polymorphism with risk of GBM development in Koreans. Materials and Methods A case-control study was performed to identify the odds ratios (OR) of HLA class I and II genes for GBM. The control group consisted of 142 healthy Korean volunteers, and the GBM group was 80 patients with newly diagnosed GBM at our institution. HLA class I (-A, -B, and –C) and class II (-DR, -DQ, and –DP) genotyping was performed by high-resolution polymerase chain reaction (PCR)-sequence-based typing (PCR-SBT) methods. Results There were significantly decreased frequencies of HLA-A*26:02 (OR 0.22 CI 0.05-0.98), HLA-C*08:01 (OR 0.29 CI 0.10-0.87), and HLA-DRB1*08:03 (OR 0.32 CI 0.11-0.98), while there was significantly increased frequency of HLA-C*04:01 (OR 2.29 CI 1.05-4.97). In analysis of haplotypes, the frequency of DRB1*14:05-DQB1*05:03 was significantly decreased (OR 0.22 CI 0.05-0.98). Conclusion This study suggests that genetic variations of HLA may affect GBM development in Koreans. Further investigations with larger sample sizes are needed to delineate any potential role of the HLA polymorphisms in the pathogenesis of GBM development.

The aims of this study are to measure the technical efficiency (TE) of Cambodian household’s rice production and trying to determine its main influencing factors using the stochastic frontier production function. The study utilized primary data collected from 301 rice farmers in three selected districts of Battambang by structured questionnaires. The empirical results indicated the level of household rice output varied according to differences in the efficiency of production processes. The mean TE is 0.34 which means that famers produce 34% of rice at best practice at the current level of production inputs and technology, indicates that rice output has the potential of being increased further by 66% at the same level of inputs if farmers had been technically efficient. Furthermore, between 2013-2015 TE of household’s rice production recorded -14.3% decline rate due to highly affected of drought during dry season of 2015. Moreover, evidence reveals that land, fertilizer, and pesticide are the major influencing input factors of household’s rice production, while disaster, education of household head, family size and other crops’ cultivated area are core influencing factors decreasing TE. Conversely, the main influencing factors increasing TE are irrigated area, number of plot area and sex of household head.

The aims of this study are to measure the technical efficiency (TE) of Cambodian household’s rice production and trying to determine its main influencing factors using the stochastic frontier production function. The study utilized primary data collected from 301 rice farmers in three selected districts of Battambang by structured questionnaires. The empirical results indicated the level of household rice output varied according to differences in the efficiency of the production processes. The mean TE is 0.34 which means that famers produce 34% of rice at best practice at the current level of production inputs and technology, indicates that rice output has the potential of being increased further by 66% at the same level of inputs if farmers had been technically efficient. Furthermore, between 2013-2015, TE of household’s rice production recorded -14.3% decline rate due to highly affected of drought during dry season of 2015. Moreover, evidence reveals that land, fertilizer, and pesticide are the major influencing input factors of household’s rice production, while disaster, education of household head, family size and other crops’ cultivated area are core influencing factors decreasing TE. Conversely, the main influencing factors increasing TE are irrigated area, number of plot area and sex of household head.

The present study aims to measure the technical efficiency and establish core factors effecting rice production in Cambodia. Four-years dataset generated from the central government document “Profile on Economics and Social” of entire 25 provinces between 2012-2015 and the stochastic production frontier model (SFA) was applied. The results indicated that the level of output (quantity) of Cambodian rice production varied according to the different level of capital investment in agricultural machineries, total rice actual harvested area, and technically fertilizers application within provinces. Furthermore, evidence revealed the overall mean efficiency of rice production is 78.4% implies that there is still room to further improve technical efficiency by given the same level of inputs and technology. More importantly, the findings revealed that irrigation, production technique and amount of agricultural supporting staffs are being as the most important influencing factors of rice production’s technical efficiency in Cambodia. In conclusion, present study strongly recommends the development of irrigation systems and good water management practices to be considered and bring into more effective actions by the central government as well as related agencies for improving rice production in Cambodia in addition to capital investment and improving technical skills of supporting staffs and rural farmers.

The utilization of wind energy has become increasingly popular in the United States and many European countries due to its abundant natural source and optimized design. While existing wind turbines are predominantly large-scale and not suitable for standalone or distributed power production, Lubbock County in West Texas offers a diverse range of renewable energy options to meet its energy needs. The region relies heavily on utility-scale wind energy sources to supply power to the Texas Grid, replacing conventional fossil fuel-based systems. Currently, standalone solar PV systems are the preferred choice for renewable energy generation. However, West Texas possesses an ample supply of wind energy that can be harnessed to establish a microgrid and provide standalone power to rural communities. By employing the latest technology and optimizing efficiency, even in low-scale generation, a 6 kW permanent magnet alternator-based distributed wind turbine has been designed. This paper focuses on analyzing the techno-economic aspects of implementing this wind turbine in a real-world scenario, taking into account wind attributes such as velocity and available power at the specific location.

Cotton is the most ubiquitous and profitable fiber with diverse industrial and domestic applications. Grown in over 100 countries, it has a global market value of about $40 billion and employs over 350 million people from fields to textile mills, contributing about 7% of total labor-force recruitment in developing economies. Cotton has an indeterminate growth habit and an extensive tap root system affected by soil physicochemical and environmental conditions. There is a consensus among experts that conventional cotton cultivation still has a long way to attain sustainability, which is essential if cotton will maintain its competitive edge over other natural and synthetic fibers like hemp, polyesters, and rayon. Despite several efforts already committed to growing cotton sustainably, sustainability has eluded cotton cultivation globally because of the intense farm inputs (freshwater, pesticides, and heavy-duty equipment) needs, especially in developing economies. Some of the technological advancements towards achieving the goal of sustainable cotton cultivation include the development of new varieties, improved irrigation and mulching and precision agriculture techniques, application of remote sensing and Unmanned Aerial Systems (UAS) combined with image processing, and the introduction of autonomous and multi-purpose robotic platforms for growing and harvesting cotton. This review attempts to evaluate the successes already achieved by stakeholders in moving cotton towards sustainable production and identify areas where efforts are still needed to reach sustainable production and improved profitability goals for cotton with projections for future research directions.

The changes in the properties of three biological events, that occur with cerebral aging, are discussed. These adverse changes already begin to develop early in mid-life and gradually become more pronounced with senescence. Essentially, they are reflections of the progressive decline in effectiveness of key processes, resulting in the deviation of essential biochemical trajectories to ineffective and ultimately harmful variants of these programs. The emphasis of this review is the major role played by mitochondria in such transition of these three important processes toward more deleterious variants as brain aging proceeds. 1. The immune system. The shift away from an efficient immune response to a more unfocused, continuing inflammatory condition. Such a state is both ineffective and harmful. 2. Reactive oxygen species are important intracellular signaling systems. Also, microglial phagocytic activity utilizing short lived reactive oxygen species contribute to the removal of aberrant or dead cells and bacteria. These processes are transformed into an excessive, untargeted and persistent generation of pro-oxidant free radicals (oxidative stress). 3. The normal efficient neural transmission is modified to a state of undirected, chronic low-level excitatory activity. Each of these changes is characterized by the occurrence of continuous activity that is inefficient and diffuse. The signal/noise ratio of several critical biological events is thus reduced as beneficial responses are gradually replaced by their impaired and deleterious variants.

Nuclear fission technologies have the potential to play a significant role in the energy mix of a net-zero and sustainable society. However, to achieve the sustainability goal two significant challenges remain: efficient and sustainable fuel usage and the minimisation of long term nuclear waste. Civil nuclear molten salt systems and technologies offer the opportunity to address both, delivering future reactors at scale for efficient and effective power production and nuclear waste burnup. Potentially, both objectives could be fulfilled in one reactor system, which could significantly improve sustainability indices. In addition, demand driven development of a significantly reduced fuel cycle with enhanced proliferation resistance offers further potential for improvement. To achieve these goals, a transformative approach for salt clean-up during molten salt reactor operation is proposed in this work, by concentrating on the detection and removal of key neutron poisoning elements which prevent the reactor from long-term operation. This work also demonstrates the importance of the effective integration of physics, reactor design and chemistry when systems modelling in achieving these system development goals.

Rapid advances in the screening, diagnosis, and treatment of genetic disorders has increased the number of conditions that could be detected through universal newborn screening (NBS). However, addition of conditions to the Recommended Uniform Screening Panel (RUSP) and implementation of nationwide screening has been a slow process taking several years to accomplish for individual conditions. Here we describe web-based tools and resources developed and implemented by the newborn screening translational research network (NBSTRN) to advance newborn screening research and support NBS stakeholders. NBSTRN’s tools include the Longitudinal Pediatric Data Resource (LPDR), the NBS Condition Resource (NBS-CR), the NBS Virtual Repository (NBS-VR), and the Ethical, Legal, and Social Issues (ELSI) Advantage. Research programs including the Inborn Errors of Metabolism Information System (IBEM-IS), BabySeq, EarlyCheck, and Family Narratives Use Cases have utilized NBSTRN’s tools, and in turn contributed research data to further expand and refine these this resource. Additionally, we discuss ongoing tool development to facilitate expansion of genetic disease screening in increasingly diverse populations. In conclusion, NBSTRN’s tools and resources provide a trusted platform to enable NBS stakeholders to advance NBS research and improve clinical care for patients and their families.

Keywords: olfactory rehabilitation; chronic pain; fMRI;

A synoptic review of plant disease epidemics and outbreaks was made using two complementary approaches. The first approach involved reviewing scientific literature published in 2021, in which quantitative data related to new plant disease epidemics or outbreaks were obtained via surveys or similar methodologies. The second approach involved retrieving new records added in 2021 to the CABI Distribution Database, which contains over a million global geographic records of organisms from over 50,000 species. The literature review retrieved 186 articles, describing studies in 62 categories (pathogen species/species complexes) across >40 host species on 6 continents. Pathogen species with >5 articles were: Bursaphelenchus xylophilus, Candidatus Liberibacter asiaticus, cassava mosaic viruses, citrus tristeza virus, Erwinia amylovora, Fusarium spp. complexes, Fusarium oxysporum f. sp. cubense, Magnaporthe oryzae, maize lethal necrosis co-infecting viruses, Meloidogyne spp. complexes, Pseudomonas syringae pvs, Puccinia striiformis f. sp. tritici, Xylella fastidiosa, and Zymoseptoria tritici. Automated searches of the CABI Distribution Database identified 617 distribution records new in 2021 of 283 plant pathogens. A further manual review of these records confirmed 15 pathogens reported in new locations: apple hammerhead viroid, apple rubbery wood viruses, Aphelenchoides besseyi, Biscogniauxia mediterranea, Ca. Liberibacter asiaticus, citrus tristeza virus, Colletotrichum siamense, cucurbit chlorotic yellows virus, Erwinia rhapontici, Erysiphe corylacearum, Fusarium oxysporum f. sp. cubense Tropical Race 4, Globodera rostochiensis, Nothophoma quercina, potato spindle tuber viroid, and tomato brown rugose fruit virus. Of these, 4 pathogens had at least 25% of all records reported in 2021. We assessed two of these pathogens – tomato brown rugose fruit virus and cucurbit chlorotic yellows virus – to be actively emerging in/spreading to new locations. Although three important pathogens – Ca. Liberibacter asiaticus, citrus tristeza virus and Fusarium oxysporum f. sp. cubense – were represented in the results of both our literature review and our interrogation of the CABI Distribution Database, in general our dual approaches revealed distinct sets of plant disease outbreaks and new records, with little overlap.

Recently, there have been revolutions in the development of both gene therapy and genome surgical treatments for inherited diseases. Much of this progress has been centered around hereditary retinal dystrophies, because the eye is an immune-privileged and anatomically ideal target. Gene therapy treatments, already demonstrated to be safe and efficacious in numerous clinical trials, are benefitting from the development of new viral vectors, such as dual and triple AAVs. CRISPR/Ca9, which revolutionized the field of gene editing, is being adapted into more precise “high fidelity” and catalytically dead variants. New CRISPR endonucleases, such as CjCas9 and Cas12a, are generating excitement in the field as well. Stem cell therapy has emerged as a promising alternative, allowing human embryo derived stem cells and induced pluripotent stem cells to be edited precisely in vitro and then reintroduced into the body. This article highlights recent progress made in gene therapy and genome surgery for retinal disorders, and it provides an update on precision medicine FDA treatment trials.

Revealing the spatial distribution mechanism of the coupling effect between soil water and salt is essential for managing saline-alkali farmland. This study utilized the multifractal method to analyze soil water and salt under varying water content levels in arid saline-alkali farmland. Soil samples were collected on the second (S1), fifth (S2), eighth (S3), eleventh (S4), and fourteenth (S5) days after a rainfall event. The findings showed that a significant decrease in soil water content, contrasting with an increase in soil salt content throughout the soil layers post-rainfall. As water content decreased, the spatial variability of soil water initially increased from S1-3 and then decreased, while the spatial variability of soil salt decreased. The spatial distribution between soil water and salt exhibited a high correlation at S3-4 (with relative water content of soil ranging from 0.52 to 0.75) due to their coupling effect. However, soil salt was unevenly leached by rainfall at high water content levels (S1-2) and precipitated at low water content levels (S5), resulting in low spatial variability correlations between soil water and salt. This study elucidated the coupling process of soil water and salt, identifying their spatiotemporal distribution mechanism in dryland agricultural areas.

Evidence-based canine decontamination protocols are underrepresented in the veterinary literature. Aerosolized microbiological and chemical contaminants can pose a risk in deployment environments highlighting the need for improved canine field decontamination strategies. Prior work has established the efficacy of traditional, water-intensive methods on contaminant removal from the coat of the working canine; however, it is not known if similar reductions can be achieved with simple field expedient methods when resources are limited. The objective of this study was to measure the reduction of aerosolized contamination via a practical “wipe-down” procedure performed on working canine coats contaminated with a fluorescent, non-toxic, water-based aerosol. Disposable, lint-free towels were saturated with one of three treatments: water, 2% chlorhexidine gluconate scrub (CHX), or 7.5% povidone-iodine scrub (PVD). Both CHX and PVD were diluted at a 1:4 ratio. Treatments were randomly assigned to one of three quadrants established across the shoulders and back of commonly utilized working dog breeds (Labrador retrievers, n = 16; German shepherds, n = 16). The fourth quadrant remained unwiped, serving as a control. Reduction in fluorescent marker contamination was measured and compared across all quadrants. PVD demonstrated greater marker reduction compared to CHX or water in both breeds (P < 0.0001). Reduction was similar between CHX or water in Labradors (P = 0.86) and shepherds (P = 0.06). Effective wipe-down strategies using common veterinary cleansers should be further investigated and incorporated into decontamination practices to safeguard working canine health and prevent cross-contamination of human personnel working with these animals.

In Cameroon, Aedes mosquitoes transmit various arboviruses, posing significant health risks. We aimed to characterize the Aedes virome in southwestern Cameroon and identify potential core viruses which might be associated with vector competence. A total of 398 Aedes mosquitoes were collected from four locations (Bafoussam, Buea, Edea and Yaounde). Aedes albopictus dominated all sites except for Bafoussam where Aedes africanus prevailed. Metagenomic analyses of mosquitoes grouped per species into 54 pools revealed notable differences in eukaryotic viromes between Ae. africanus and Ae. albopictus, with the former exhibiting greater richness and diversity. Thirty-seven eukaryotic virus species from 16 families were identified, including six novel viruses with near complete genome sequences. Seven viruses were further quantified in individual mosquitoes via qRT-PCR. Although none of them could be identified as core viruses, Guangzhou sobemo-like virus and Bafoussam mosquito solemovirus virus were highly prevalent regionally in Ae. albopictus and Ae. africanus, respectively. This study highlights the diverse eukaryotic virome of Aedes species in southwestern Cameroon. Despite their shared Genus, Aedes species exhibit limited viral sharing, with varying viral abundance and prevalence across locations. Ae. africanus, an understudied vector, harbors a rich and diverse virome, suggesting potential implications for arbovirus vector competence.

Cellular senescence has recently been recognized as a hallmark of cancer, reflecting its association with aging and inflammation, its role as a response to deregulated proliferation and oncogenic stress, and its induction by cancer therapies such as radiation, chemotherapy, and targeted agents. While such therapy-induced senescence (TIS) has been linked to resistance, recurrence, metastasis and normal tissue toxicity, TIS has the potential to enhance therapy response and stimulate anti-tumor immunity. In this review, we examine the Jekyll and Hyde nature of senescent cells (SnCs), with a particular focus on how their persistence while expressing the senescence-associated secretory phenotype (SASP) modulates the tumor microenvironment through autocrine and paracrine mechanisms. Via the SASP, the formation of SnCs may alternately mediate resistance or response to conventional therapy. Further, toward fulfilling the unmet potential of cancer immunotherapy, we consider how SnCs may influence tumor inflammation and serve as a source of antigen to potentiate anti-tumor immunity. This new view suggests treatment strategies based on inducing TIS to enhance immune checkpoint blockade. Finally, we describe strategies for mitigating the detrimental effects of senescence, such as modulating the SASP or targeting SnC persistence, toward enhancing the benefits of cancer treatment.

Abstract: Herbicide flashback is an undesirable response that results in damage or mortality of non-target plants near chemically treated plants. In severe instances, crop trees can be injured resulting in financial loss or inability to capture management objectives. Land managers need to know the potential limitations of using triclopyr acid (50% solution in water) and what quantity can cause damage to non-target trees (trees not aimed to control via herbicide). Three naturally regenerated (previous clearcut) bottomland hardwood sites, ranging from 14–20 years of age, received partial overstory deadening using Trycera® herbicide. Residual “leave” trees experienced indirect herbicide uptake resulting in some trees either experiencing mortality or partial mortality with top die-back/epicormic branching. An increased probability of damage occurred as tree diameter decreased and the number of treated stems around non-target stems increased. American sycamore, green ash, and sweetgum were most susceptible to flashback. This study examines the unanticipated chemical effect of deadening adjacent stems surrounding residual leave trees in poorly drained soils.

Accurate pose estimation is a fundamental ability that all mobile robots must posses in order to navigate a given environment. Much like a human, this ability is dependent on the robot's understanding of a given scene. For Autonomous Vehicles (AV's), detailed 3D maps created beforehand are widely used to augment the perceptive abilities and estimate pose based on current sensor measurements. This approach however is less suited for rural communities that are sparsely connected and cover large areas. Topological maps such as OpenStreetMaps have proven to be a useful alternative in these situations. However, vehicle localization using these maps is non-trivial, particularly for the global localization task, where the map spans large areas. To deal with this challenge, we propose road descriptors along with an initialization technique for localization that allows for fast global pose estimation. We test our algorithms on (real world) maps and benchmark them against other map based localization as well as SLAM algorithms. Our results show that the proposed method can narrow down the pose to within 50 centimeters of the ground truth significantly faster than the state of the art methods.

We assessed how close human perceptions of landscape modification matched a multivariate index based on remotely sensed data of the same locations. Using a Human Footprint (HF) map of the continental U.S. (scaled 0-100), we created three series of aerial images, each with ten images distributed evenly across the 10 deciles of HF score. Using a web-based survey, 290 members of the global public ranked the images in one series based on their perception of the degree of human modification. Respondents also reported age, sex, and country. The degree of correspondence between rankings by respondents and by HF score was high, an average of 1.29 units of difference out of a maximum possible of 5.0. Differences among respondents were not explained by age, sex, or general geographic location. These results suggest that human perception of relative landscape modification conforms closely with the relative ranking made by a multivariate, analytical index.

We firstly discuss classical stability for a dynamical system of two ions levitated in a 3D Radio-Frequency (RF) trap, assimilated with two coupled oscillators. We obtain the solutions of the coupled system of equations that characterizes the associated dynamics. In addition, we supply the modes of oscillation and demonstrate the weak coupling condition is inappropriate in practice, while for collective modes of motion (and strong coupling) only a peak of the mass can be detected. Phase portraits and power spectra are employed to illustrate how the trajectory executes quasiperiodic motion on the surface of torus, namely a Kolmogorov-Arnold-Moser (KAM) torus. In an attempt to better describe dynamical stability of the system, we introduce a model that characterizes dynamical stability and the critical points based on the Hessian matrix approach. The model is then applied to investigate quantum dynamics for many-body systems consisting of identical ions, levitated in 2D and 3D ion traps. Finally, the same model is applied to the case of a combined 3D Quadrupole Ion Trap (QIT) with axial symmetry, for which we obtain the associated Hamilton function. The ion distribution can be described by means of numerical modeling, based on the Hamilton function we assign to the system. The approach we introduce is effective to infer the parameters of distinct types of traps by applying a unitary and coherent method, and especially for identifying equilibrium configurations, of large interest for ion crystals or quantum logic.

More than 20 years after the discovery of the first anelloviruses (AVs), they still remain a mysterious group of viruses. To date, there is no clear understanding of their impact on the host organism, although information is emerging about their participation in various pathologies. However, it is well known that AVs are an important component of the human virome. In the current study we assessed the abundance of AVs in viromes from four nasal and pharyngeal samples from children with respiratory symptoms using a metagenomic approach. It is worth noting that three patients had known respiratory viruses and one did not have any. Regarding AVs, they were detected in all samples, namely Torque teno mini virus (TTMV). The greatest abundance and diversity of AVs (Torque teno virus (TTV), TTMV and Torque teno midi virus (TTMDV)) were shown in a diseased patient with an absence of respiratory viruses, which may indicate the potential involvement of AVs in the maintenance of respiratory symptoms. An activated immune system to combat the main pathogens, against the background of which the number of AVs decreases, is discussed as a possible reason for the reduced diversity of anellome in other patients. We also compared the results of the metagenomic approach and qPCR for major respiratory viruses, which were in agreement. In addition, metagenomic sequencing made it possible to obtain additional data on viral genomes in order to establish their taxonomic identification and characterize individual viral profiles in patients from the Siberian part of Russia.

Coronary angiography, long considered the gold standard for coronary imaging, faces limitations in assessing coronary vessel wall anatomy and guiding percutaneous coronary intervention (PCI). Despite its prevalence, studies have demonstrated that it is suboptimal in estimating the severity of coronary disease and physiologic significance of stenosis. Intracoronary imaging techniques, such as intravascular ultrasound (IVUS) and optical coherence tomography (OCT), offer promising alternatives to overcome these limitations. This review delves into the nuances of IVUS and OCT, highlighting their strengths and limitations as adjuncts to PCI. IVUS, utilizing ultrasound technology, and OCT, based on near-infrared light, each provide unique insights into coronary pathology. They differ in terms of temporal and spatial resolution, influencing their capabilities in plaque characterization and vessel assessment. The discussion navigates their historical evolution, technical specifications, and clinical utility. Meta-analyses and adjusted observational studies suggest that both IVUS and OCT-guided PCI correlate with reduced cardiovascular risks compared to angiographic guidance alone. While IVUS has demonstrated consistent benefits in terms of clinical outcomes, the evidence supporting OCT is less robust. However, the utilization of these imaging modalities remains variable across regions, with increasing adoption in recent years, particularly in IVUS-guided PCIs. Intravascular ultrasound's journey from early motion detection to current high-resolution mechanical systems is traced, including improvements in catheter size and compatibility. On the other hand, optical coherence tomography has advanced significantly, utilizing near infrared light to achieve unparalleled resolutions, albeit requiring temporary blood clearance for optimal imaging. In conclusion, IVUS and OCT offer valuable insights into coronary pathophysiology and guide interventions with improved precision compared to traditional angiography. While IVUS remains more extensively utilized, OCT's growing potential is underscored by advancements in technology, culminating in enhanced imaging capabilities. Both modalities demonstrate comparable clinical outcomes, emphasizing the need for tailored imaging choices based on individual clinical scenarios. The continued refinement and broader integration of intravascular imaging are expected to play a pivotal role in optimizing coronary interventions and patient outcomes.