Titanium (Ti) and Ti-based alloys are commonly used in dental implants, and surface modifications of dental implants are important for achieving osseointegration (i.e., direct connection between the implant surface and bone). This study investigated the effect of an eco-friendly etching solution—a hydrogen peroxide–sodium bicarbonate mixture—on the surface properties and contact angles of and osteoblast adhesion and proliferation on Ti surfaces. Disk-shaped Ti specimens were prepared using different surface treatments (machining, sandblasting, and sandblasting/acid-etching), and they were immersed in the etching solution and then ultrasonically cleaned. Surface characterization was performed using scanning electron microscopy, digital microscopy, contact angle analysis, and X-ray photoelectron spectroscopy. MG-63 osteoblasts were cultured on the specimens, and their adhesion to the specimen surface and their proliferation were examined using staining and the MTT assay, respectively. Additional etching with the etching solution caused the formation of nano/micro hierarchical structures, increased the surface roughness, and enhanced the hydrophilicity. Osteoblast adhesion and proliferation were found to improve on the modified surfaces. The eco-friendly etching method has the potential to enhance the biological properties of Ti implant surfaces and to thereby improve the dental implant performance.

: The purpose of this research was to verify the importance and performance of crisis management in Korean fitness center using Importance-Performance Analysis (IPA). For this study, 304 fitness center executives and managers in Seoul and Gyeonggi region were selected as from March 21 to May 17, 2020. Frequency analysis was performed using SPSS 24.0 and exploratory factor analysis was conducted to verify the validity and reliability. Priority analysis and IPA analysis were performed to compare the mean values, and the following results were obtained. First, in the first quadrant, there were 6 attributes besides keep social distancing between employees and customers. Second, in the second quadrant, there were four attributes in addition to regular disinfection of the gymnasium. Third, in the third quadrant, there were 6 attributes besides maintain furniture clean. Third, there were 6 attributes other than maintaining furniture clean in the third quadrant. Fourth, in the fourth quadrant, there are three attributes in addition to the restriction of face-to-face meetings. The conclusion is as follows. First, equip supplies for prevention of covid19, keep social distance, and check government support policies. Second, analyze of economic support policies, and research on their application methods. Third, Prepare various non-face-to-face communication methods and Untact(non-contact) marketing strategies. Fourth, make a checklist for factors with relatively little importance.

Ixodes scapularis is a blood-feeding obligate ectoparasite responsible for transmitting the Lyme disease (LD) agent, Borrelia burgdorferi. During the feeding process, I. scapularis injects B. burgdorferi into the host along with its saliva, facilitating the transmission and colonization of the LD agent. Tick calreticulin (CRT) is one of the earliest tick saliva proteins identified and is currently utilized as a biomarker for tick bites. Our recent findings revealed elevated levels of CRT in the saliva proteome of B. burgdorferi-infected I. scapularis nymphs compared to uninfected ticks. Differential precipitation of proteins (DiffPOP) and LC-MS/MS analyses were used to identify the interactions between Ixs (I. scapularis) CRT and human plasma proteins and further exploring its potential role in shielding B. burgdorferi from complement killing. We observed that although yeast expressed recombinant (r) IxsCRT binds to the C1 complex (C1q, C1r, and C1s), the activator of complement via the classical cascade, it did not inhibit deposition of the membrane attack complex (MAC) via the classical pathway. Intriguingly, rIxsCRT binds intermediate complement proteins (C3, C5, and C9) and reduces MAC deposition through the lectin pathway. Despite inhibition of MAC deposition in the lectin pathway, rIxsCRT did not protect a serum sensitive B. burgdorferi strain (B314/pBBE22Luc) from complement-induced killing. As B. burgdorferi establishes a local dermal infection before disseminating to secondary organs, it is noteworthy that rIxsCRT promotes the replication of B. burgdorferi in culture. We hypothesize that rIxsCRT may contribute to the transmission and/or host colonization of B. burgdorferi by acting as a decoy activator of complement and by fostering B. burgdorferi replication at the transmission site.

We simulated the glass-blowing process to model a shell resonator, which is a key component in MRIG (Micro Rate Integrating Gyroscope), using the finite elements method to solve a non-isothermal problem. We also calculated the mechanical characteristics of the modeled resonator, including effective mass, eigenfrequencies, angular gain, and energy loss, to predict the resonator's performance as a gyroscope. One key aspect we addressed is the bending of the resonator's rim toward the stem during glass-blowing process. This phenomenon occurs due to increased heat loss at the mold's edge and reduced heat flux at the side of the Gaussian heat source. To mitigate rim bending and the subsequent reduction in capacitance between the rim and 3D electrodes, which can degrade performance in micro glass-blown shell resonators for gyroscopes, we propose two potential mold solutions. The first is using a short-stem mold, which requires extensive polishing to eliminate the bent rim. The second solution is using a mold with a suitable chamfer at the edge, resulting in a straight rim. To quantitatively compare resonators created by these two types of molds, we calculated the noise factor for predicting its gyroscope performance. From these calculations, we find out that using the chamfered mold enables us to increase in the resonator's effective mass, eigenfrequency, angular gain, and quality factor, consequently reducing the noise factor compared to using the short-stem mold. This simulation process will assist us in getting insight into understanding a shell resonator as a gyroscope, designing a mold and determining experimental conditions.

South Asian countries experience frequent drought incidents recently, and due to this reason, many scientific studies were carried to explore the drought in South Asia. In this context, we review scientific studies related to drought in South Asia. The study initially identifies the importance of drought-related studies and discusses drought types for South Asian regions. The representative examples of drought events, severity, frequency, and duration in South Asian countries are identified. The Standardized Precipitation Index (SPI) was mostly adopted in South Asian countries to quantify and monitor droughts. Nevertheless, the absence of drought quantification studies in Bhutan and Maldives is of great concern. Future studies to generate a combined drought severity map for the South Asian region are required. Moreover, the drought prediction and projection in the regions is rarely studied. Further, the teleconnection between drought and large-scale atmospheric circulations in the South Asian area has not been discussed in detail in the most scientific literature. Therefore, as a take-home message, there is an urgent need for scientific studies related to drought quantification for some regions in South Asia, prediction and projection of drought for an individual country (or as a region), and drought teleconnection to atmospheric circulation.

This study investigates the cooling effects of water facilities installed in urban parks, focusing on Sangju Namsan Park. The park features a water path and a cooling fog system, introduced as part of an environmental adaptation project to mitigate urban heat. Microclimate data were collected during the hot summer months of 2023 to assess the impact of these facilities on air temperature, humidity, and perceived thermal comfort. Results indicate that the water path and fog system reduced surface temperatures by up to 1.08°C, with additional benefits in reducing fine particulate matter and CO2 levels. The findings suggest that strategically placed water features can enhance thermal comfort and air quality in urban parks, offering a practical approach to climate change adaptation in urban planning. These insights are crucial for urban planners and policymakers aiming to improve public health and quality of life in the face of climate change.

Background and Objectives: Light therapy (LT) is used as an adjunctive treatment for sleep problems. This study evaluates the impact of LT on sleep quality and sleep-related parameters in patients with sleep disorders. Materials and Methods: We performed a pilot randomized, open-label clinical trial. Fourteen patients aged 20–60 years with sleep disorders for more than three months were randomized into the control and LT groups (1:1 ratio). The LT group was instructed to use a device that provides bright LT (6000 K, 380 lux, wavelength 480 nm) for at least 25 minutes before 09:00 am for two weeks. A self-reported questionnaire was used to evaluate circadian preference, mood, and sleep-related parameters. We analyzed serum cortisol levels and clock genes expression. Results: The Epworth Sleepiness Scale (ESS), insomnia severity index, and Pittsburgh Sleep Quality index were significantly improved within the LT group only after the two-week period. When comparing the two groups, only the change in ESS significant was significant (mean difference; control: -0.14 vs LT: -1.43, p=0.021) after adjusting for baseline characteristics. There were no significant differences in serum cortisol or clock genes expression. Conclusions: LT can improve daytime sleepiness in patients with sleep disorders; however, further well-designed studies are warranted to confirm its efficacy.

Background: Infections of Coronavirus Disease-2019 (COVID-19) can cause long-term effects known as long COVID. This pilot study aimed to evaluate the feasibility of a clinical study as well as the efficacy and safety of traditional East Asian herbal medicines in alleviating fatigue and cognitive dysfunction “brain fog” in patients with long COVID. Methods: This prospective pilot study investigated the use of three types of herbal medicines, Bojungikki-tang (BIT), Kyungok-go (KOG), and Cheonwangbosim-dan (CBD), for a 12-week period as potential treatments for fatigue and cognitive dysfunction in patients with long COVID. Forty-five patients with long COVID were recruited, and one of three drugs was given based on the patient’s symptoms and pattern identification. The effect of herbal medications on fatigue and cognitive function outcomes was assessed over a 36-week period, with patient adherence closely monitored. Results: After 12 weeks of herbal drug administration, fatigue symptoms improved significantly across all groups, with treatment success rates of 80%, 53.33%, and 46.67% in the BIT, KOG, and CBD groups, respectively. However, “brain fog” symptoms showed less improvement, with treatment success rates of 40%, 46.67%, and 13.33% in the BIT, KOG, and CBD groups, respectively. All adverse events reported were mild and unrelated to the medication. The study design was found to be feasible with high medication adherence. Conclusions: This study demonstrated the feasibility of conducting a clinical trial with three herbal medicines to treat long COVID symptoms like fatigue and “brain fog.”

Ionic liquids (ILs) have gained interest among researchers due to its tunable properties that can be used in wide applications. However, toxicity and bio-degradation studies of ILs proved that most of the aromatic ILs, such as imidazolium is highly toxic and non-biodegradable. Several advance oxidation processes (AOPs) have been investigated by researchers to evaluate the efficiency of the systems for the removal of ILs from wastewater. However, the issue on relative high cost and environmental concern has limited the application of these AOPs in industry. In this research, photocatalytic study using hybrid nano-materials was conducted to evaluate the efficiency of this system as an alternative AOP system for removal of ILs from wastewater. The synergistic effect of adsorption-photodegradation was introduced by depositing Fe-TiO₂ onto the functionalized activated carbon (AC). Nano-TiO₂ was synthesized using micromulsion method before modification with transition metal and deposited onto the oxidized AC. Photodegradation reaction of 1-butyl-3-methylimidazolium chloride [bmim]Cl was investigated under simulated visible light irradiation. It was observed that the overall efficiency of the system was increased with the increasing amount of Fe dopant. Investigation on the extrinsic factors such as solution pH, initial concentration of ILs and photocatalyst dosage showed to significantly affect the overall efficiency of the systems where the optimum condition for the system was observed at pH 10, with initial ILs at 1mM at 1 g/L of photocatalyst. The best performance photocatalyst was 0.2Fe-TiO₂/AC.

The association between the choice of general anesthetic agents and the risk of acute kidney injury (AKI) and long-term renal function after nephrectomy has not yet been evaluated. We reviewed 1087 cases of partial or radical nephrectomy. The incidence of postoperative AKI, new-onset chronic kidney disease (CKD) stage 3a and CKD upstaging were compared between different general anesthetic agent groups: propofol, sevoflurane, and desflurane. Four different propensity score analyses were performed to minimize confounding for each pair of comparison (propofol vs sevoflurane; propofol vs desflurane; sevoflurane vs desflurane; propofol vs volatile agents). Study outcomes were compared before and after matching. Kaplan-Meier survival curve analysis was performed to compare renal survival determined by the development of CKD stage 3a between groups up to 36 months after nephrectomy before and after matching. Propofol was associated with a lower incidence of AKI, CKD upstaging and a higher three-year renal survival after nephrectomy compared to sevoflurane or desflurane group after matching (AKI: propofol 23.2% vs. sevoflurane 39.5%, P=0.004, vs. desflurane 34.3%, P=0.031; CKD upstaging: propofol 27.2% vs. sevoflurane 58.4%, P<0.001, vs. desflurane 48.6%, P=0.017; Log-rank test propofol vs. sevoflurane P<0.001, vs. desflurane P=0.015). Propofol was also associated with a lower incidence of new-onset CKD after nephrectomy compared to sevoflurane after matching (P<0.001). However, there were no significant differences between sevoflurane and desflurane. In conclusion, propofol, compared to volatile agents, may be the reasonable choice of general anesthetic agent for nephrectomy to attenuate postoperative renal dysfunction. Randomized prospective trials are warranted to test this hypothesis.

Oxidative stress and inflammation are basic pathogenic factors involved in tissue injury, pain, as well as acute and chronic diseases. Since long-term uses of steroids and non-steroidal anti-inflammatory drugs (NSAIDs) cause severe adverse effects, novel effective materials with minimal side effects are required. In this study, polyphenol content and antioxidative activity of rosebud extracts from 24 newly-crossbred Korean roses were analyzed. Among them, Pretty Velvet rosebud extract (PVRE) were found to contain high polyphenols and to show in vitro antioxidative and anti-inflammatory activities. In RAW 264.7 cells stimulated with lipopolysaccharide (LPS), PVRE down-regulated mRNA expression of inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2), and thereby decreased nitric oxide (NO) and prostaglandin E2 (PGE2) production. In an air-pouch inflammation model, treatment with PVRE decreased λ-carrageenan-induced tissue exudation, infiltration of inflammatory cells including neutrophils, monocytes and lymphocytes, and tumor necrosis factor-α and interleukin-1β concentrations, as achieved with dexamethasone (a steroid). Notably, PVRE also inhibited PGE2, similar to dexamethasone and indomethacin (an NSAID). The anti-inflammatory effects of PVRE were confirmed by microscopic findings, attenuating tissue erythema, edema, and inflammatory cell infiltration. These results indicate that PVRE exhibits dual (steroid- and NSAID-like) anti-inflammatory activities by blocking both the iNOS ― NO and COX-2 ― PG pathways, and that PVRE could be a promising anti-inflammatory material for diverse issue injuries.

As argued by ‘Declaration of Concrete Environment (2010)’ of Korea and ‘Declaration of Asian Concrete Environment (2011)’ of six Asian countries, concrete as a single material has lately shown extremely large impact on environmental issues such as climate change. Assessment of environmental impact from concrete material and production has considerable importance. Concrete is a major material used in the construction industry that emits a large amount of substances with environmental impacts during its life cycle. Accordingly, technologies for the reduction in and assessment of the environmental impact of concrete from the perspective of Life Cycle Assessment must be developed. At present, the studies in relation to greenhouse gas emission from concrete are being carried out globally as a countermeasure against climate change. In this study, a sustainable concrete mix design algorithm was designed using correlation analyses, and its carbon emission and cost reduction performances were assessed. Using correlation analyses, the concrete strength, w/b and s/a ratios, and CO₂ emissions were identified as major variables of concrete mix design that influenced other variables. Also, this study aims to evaluate the CO₂ emission reduction performance of the algorithm-deduced sustainable concrete mix design, and therefore, the CO₂ emissions of the sustainable concrete mix design are compared with those of the actual concrete mix design applied to the construction of the office building A in South Korea.

BMAP-18, derived from the N-terminal region of bovine myeloid antimicrobial peptide BMAP-27, demonstrated potent antimicrobial activity without cytotoxicity. This study aimed to compare the antibacterial, antibiofilm, and anti-inflammatory properties of BMAP-18, rich in aromatic phenylalanine residues, with its aliphatic analogue, BMAP-18-FL. Both aromatic BMAP-18 and aliphatic BMAP-18-FL exhibited equally potent antimicrobial activities against Gram-positive and Gram-negative bacteria, particularly methicillin-resistant Staphylococcus aureus (MRSA) and multidrug-resistant Pseudomonas aeruginosa (MDRPA). Mechanistic investigations employing SYTOX green uptake, DNA binding, and FACScan analysis revealed that both peptides acted by inducing membrane permeabilization and subsequent intracellular targeting. Moreover, both BMAP-18 and BMAP-18-FL effectively prevented biofilm formation and eradicated existing biofilms of MRSA and MDRPA. Notably, BMAP-18-FL displayed superior anti-inflammatory activity compared to BMAP-18, significantly reducing the expression levels of pro-inflammatory cytokines in lipopolysaccharide-stimulated macrophages. This study emphasizes the similarities and differences in the antimicrobial, antibiofilm, and anti-inflammatory properties between aromatic BMAP-18 and aliphatic BMAP-18-FL, providing valuable insights for the development of multifunctional antimicrobial peptides against drug-resistant bacteria.

Erlotinib inhibits epithelial growth factor receptor (EGFR) kinase activity and is used to treat non-small cell lung cancer (NSCLC). Despite its high efficacy, recurrence can occur in patients who become resistant to the drug. To address the underlying mechanism of Erlotinib resistance, we investigated additional mechanisms related to mode-of-drug-action, by multiple protein-binding interactions, besides EGFR by using drug affinity responsive target stability (DARTS) and liquid chromatography-mass spectrometry (LC-MS/MS) methods with non-labeled Erlotinib. DNA polymerase alpha subunit B (POLA2) was identified as a new Erlotinib binding protein that was validated by the DARTS platform, complemented with cellular thermal shift assays. Genetic knock-down of POLA2 promoted the anti-proliferative effect of the drug in the Erlotinib-resistant cell line H1299 with high POLA2 expression, whereas overexpression of POLA2 restored anti-proliferative effects in the Erlotinib-sensitive cell line HCC827 with low POLA2 expression. Importantly, POLA2 expression levels in four NSCLC cell lines were positively correlated with anti-proliferative Erlotinib efficacy, verified by bio-statistical analysis (Pearson correlation coefficient, R=0.9886). These results suggest that POLA2 is a novel complementary target protein of Erlotinib, and could clinically provide validity as a surrogate marker for drug resistance in patients with NSCLC.

In the context of reinforcement learning (RL), ensuring both safety and performance is crucial, especially in real-world scenarios where mistakes can lead to severe consequences. This study aims to address this challenge by integrating temporal logic constraints into RL algorithms, thereby providing a formal mechanism for safety verification. We employ a combination of theoretical and empirical methods, including the use of temporal logic for formal verification and extensive simulations to validate our approach. Our results demonstrate that the proposed method not only maintains high levels of safety but also achieves comparable performance to traditional RL algorithms. Importantly, our approach fills a critical gap in existing literature by offering a solution that is both mathematically rigorous and empirically validated. The study concludes that the integration of temporal logic into RL offers a promising avenue for developing algorithms that are both safe and efficient. This work lays the foundation for future research aimed at generalizing this approach to various complex systems and applications.

Intra-abdominal pressure (IAP) elevation during capnoperitoneum can cause adverse cardiovascular and respiratory effects. This study aimed to determine if a sequentially increased IAP affects cardiovascular and respiratory variables in anesthetized dogs and evaluate the effects of constant rate infusion of dexmedetomidine (Dex) on cardiovascular and respiratory variables with increased IAP. Five dogs were anesthetized, instrumented, and the Veress needle was equipped to adjust the IAP using a carbonic anhydrase insufflator. Stabilization was conducted for 1 h, and physiological variables were measured in IAPs of 0, 5, 10, 15, and 20 mmHg and after desufflation. After the washout period, the dogs underwent similar procedures along with constant rate infusion of dexmedetomidine. Cardiovascular effects of increased IAP up to 20 mmHg were not significant in healthy beagle dogs and those administered with dexmedetomidine. In the control group, the arterial pressure slightly increased, but not statistically significant, at an IAP of 20 mmHg compared with that at baseline (mean arterial blood pressure, p = 0.399; systolic arterial blood pressure, p = 0.293; diastolic arterial blood pressure, p = 0.141). When comparing the control and dexmedetomidine groups, overall significant effects of dexmedetomidine were noted on heart rate, cardiac output, and systemic vascular resistance during the experiment. Respiratory effects were not affected by abdominal insufflation when compared between different IAPs and between the two groups. Overall, an increased IAP of until 20 mmHg did not significantly affect cardiovascular and respiratory variables in both control and dexmedetomidine groups. This study suggests that dexmedetomidine infusion administration is applicable in laparoscopic procedures in healthy dogs.

Recently, due to the miniaturization of electronic products, printed circuit boards (PCBs) have also become smaller. This trend has led to the need for high-precision electrical test equipment to check PCBs for disconnections and short circuits. The purpose of this study is to improve the position repeatability of the platform unit up to ±2.5 μm in a linear stage type test equipment. For this purpose, the causes of position errors of the platform unit are analyzed. The platform unit holding the PCB is driven by a single-axis linear ball screw drive system offset from its geometric center due to design constraints. The yaw rotation of the platform is found to have a dominant effect on position repeatability. To address this problem, the methods of adding balancing weights to the platform unit and adjusting the stiffness of LM Guides are proposed. This reduces the yaw rotation by moving the centers of mass and stiffness closer to the linear ball screw actuator. In the verification tests, the position repeatability was decreased to less than ±1.0 μm.

We developed a transparent and flexible electrochemical sensor using a platform based on a network of single-walled carbon nanotubes (SWCNTs) for the non-enzymatic detection of hydrogen peroxide (H2O2) released from living cells. We decorated the SWCNT network on a poly(ethylene terephthalate) (PET) substrate with platinum nanoparticles (PtNPs) using a potentiodynamic method. The PtNP/SWCNT/PET sensor synergized the advantages of a flexible PET substrate, a conducting SWCNT network, and a catalytic PtNP, and demonstrated good biocompatibility and flexibility, enabling cell adhesion. The PtNP/SWCNT/PET-based sensor demonstrated enhanced electrocatalytic activity towards H2O2 as well as excellent selectivity, stability, and reproducibility. The sensor exhibited a wide dynamic range of 500 nM to 1 M, with a low detection limit of 228 nM. In addition, Furthermore, the PtNP/SWCNT/PET sensor remained operationally stable even after bending at various angles (15°, 30°, 60°, and 90°) with no noticeable loss of current signal. These outstanding characteristics enabled the PtNP/SWCNT/PET sensor to be practically applied for the direct culture of HeLa cells and the real-time monitoring of H2O2 release by the HeLa cells under drug stimulation.

Although sarcopenia is known to be a risk factor for non-alcoholic fatty liver disease (NAFLD), whether NAFLD is a risk factor for the development of sarcopenia is not clear. We investigated bidirectional relationships between NAFLD and low skeletal muscle mass index (LSMI) using three different datasets. Participants were classified into LSMI and normal groups. LSMI was defined as a body mass index (BMI)-adjusted appendicular skeletal muscle mass &lt;0.789 in men and &lt;0.512 in women or as the sex-specific lowest quintile of BMI-adjusted total skeletal muscle mass. NAFLD was determined according to NAFLD liver fat score or abdominal ultrasonography. The NAFLD groups showed a higher hazard ratios (HRs) with 95% confidence intervals (CIs) for LSMI than the normal groups (HRs=1.213, 95% CIs=1.050–1.402). The LSMI groups also showed a higher HRs with 95% CIs for NAFLD than normal groups (HRs=1.564, 95% CIs=1.378–1.775). Participants with NAFLD had consistently less skeletal muscle mass over 12 years of follow-up. In conclusion, LSMI and NAFLD showed a bidirectional relationship. Maintaining muscle mass should be emphasized in the management of NAFLD.

As a growing public interest in social health of elderly, studies focusing on social networks and interpersonal relationships of the elderly are needed. The present study was conducted to de-velop a structured interview to evaluate the interpersonal schema based on Self-Defining Memory of elderly. First, the word cues that the elderly often report on interpersonal events were con-firmed. Next, the indices and scoring rules were prepared, including Relationship frequency (RF), Conflict frequency (CF), Dominance mean (Dm), and Warmth mean (Wm). Healthy elderly peo-ple living alone (mean age = 71.81, SD = 3.95) were interviewed. Finally, the correlation between each index and Short form of Korean Inventory of Interpersonal Problems Circumplex Scales (KIIP-SC) was analyzed for criterion validity. The inter-rater reliability was substantial (Kappa = .61 ~ .66). Based on the analysis of criterion validity, the indices of CF, Dm, and Wm indices showed an appropriate level of criterion validity. This study developed a structural interview based on a novel system of reporting autobiographical memory and established indices with appropriate validity to evaluate interpersonal relationships. The interview is expected to identify the characteristics of interpersonal relationships of the elderly and contribute to the establishment of the elderly community, accordingly.

Ral-interacting protein 76 (RLIP76) is a potential factor with vascular endothelial growth factor (VEGF) in the corpus luteum and tumor angiogenesis. RLIP76, VEGF, and hypoxia-inducible factor-1 (HIF-1) are proteins that activate angiogenic functions in tumor and endothelial cells. RLIP76 is a main factor in tumor growth, and VEGF is a major endothelial cell protein for angiogenesis. Also, RLIP76 regulates a small GTPase (R-Ras, oncogene) in cell survival, spreading, and migration. HIF-1 is important in the corpus luteum, tumor angiogenesis, and tumor growth. VEGF and HIF-1 regulate the angiogenic function of RLIP76, and RLIP76 controls vascular growth in endothelial and tumor cells. RLIP76, R-Ras, VEGF, and HIF-1 may be useful in the research of corpus luteum and cancer therapy and the study of mechanisms of tumor angiogenesis. This review will help to elucidate the roles of RLIP76/R-Ras and VEGF via HIF-1 in corpus luteum and tumor angiogenesis, tumorigenesis, and the specific regulation of RLIP76 in luteal, tumor, and endothelial cells. Thus, we reviewed the angiogenesis of the corpus luteum and tumor in the ovarian and tumor microenvironment.

Although natural products are an important source of drugs and drug leads, identification and validation of their target proteins have proven difficult. Here, we report the development of a systematic strategy for target identification and validation employing drug affinity responsive target stability (DARTS) and mass spectrometry imaging (MSI) without modifying or labeling natural compounds. Through a validation step using curcumin, which targets aminopeptidase N (APN), we successfully standardized the systematic strategy. Using label-free voacangine, an antiangiogenic alkaloid molecule as the model natural compound, DARTS analysis revealed vascular endothelial growth factor receptor 2 (VEGFR2) as a target protein. Voacangine inhibits VEGFR2 kinase activity and its downstream signaling by binding to the kinase domain of VEGFR2, as was revealed by docking simulation. Through cell culture assays, voacangine was found to inhibit the growth of glioblastoma cells expressing high levels of VEGFR2. Specific localization of voacangine to tumor compartments in a glioblastoma xenograft mouse was revealed by MSI analysis. The overlap of histological images with the MSI signals for voacangine was intense in the tumor regions and showed colocalization of voacangine and VEGFR2 in the tumor tissues by immunofluorescence analysis of VEGFR2. The strategy employing DARTS and MSI to identify and validate the targets of a natural compound as demonstrated for voacangine in this study is expected to streamline the general approach of drug discovery and validation using other biomolecules including natural products.

This study proposes a method for image matching between infrared(IR)-RGB images using a deep learning network to estimate the deformation field. We propose a deformation field generator (DFG) that estimates the deformation field of the transformation matrix to match each pixel or IR image to the RGB image. DFG is a network that receives IR and RGB images as input; the output size is two channels and has the sample resolution as the input image. By warping the IR image through a grid-sampler that warps the image according to the value of the deformation field, we can obtain a warped IR image that matches the RGB image. Additionally, to check whether the warped IR image matched the RGB image, the masking images detecting the segmentation of objects were photographed in two images. Without directly comparing IR and RGB images, we proposed mask loss that warps the IR mask image through the deformation field and grid sampler and then compares the warped IR mask image with the RGB mask image. Mask loss solves the spatial similarity comparison problem with multi-modality images, such as IR and RGB images, by comparing the mask image with the same modality image as the mask image.

Objectives: This study aimed to investigate and compare sleep quality between patients with chronic temporomandibular disorder and healthy controls, and to analyze the association of sleep quality with disease characteristics, obstructive sleep apnea risk factors, and excessive daytime sleepiness. Methods: Chronic temporomandibular disorder patients (n=503) and 180 age- and sex-matched healthy controls were included, who completed well-organized clinical report and answered questions on sleep quality (Pittsburgh Sleep Quality Index), sleep apnea risk factors (STOP-Bang questionnaire), and excessive daytime sleepiness (Epworth sleepiness scale). Results: Mean global Pittsburgh Sleep Quality Index scores were significantly higher in the patients (6.25±2.77) than in healthy controls (6.25±2.77) (p&lt;0.001). Poor sleep was significantly more prevalent in the patient group (56.9%) than in healthy controls (22.2%) (p&lt;0.001). Compared with healthy controls, chronic temporomandibular disorder patients had a higher likelihood of obstructive sleep apnea. (STOP-Bang total score ≥3; 7.2% vs. 16.1%; p&lt;0.01) and higher excessive daytime sleepiness (Epworth sleepiness scale score ≥10; 12.8% vs. 19.7%; p&lt;0.05). Age (odds ratio=2.551; p&lt;0.001), female sex (odds ratio=1.885; p=0.007), total Epworth sleepiness scale score (odds ratio=1.839; p=0.014), and headache attributed to temporomandibular disorder (odds ratio=1.519; p=0.049) were the most powerful predictors of poor sleep (global Pittsburgh Sleep Quality Index score ≥5) in chronic temporomandibular disorder patients. Conclusion: Chronic temporomandibular disorder patients had sleep quality impairment. Various factors, including peripheral and central factors, affect the patient's sleep quality. Therefore, in addition to sleep quality and sleep-related problems, the underlying central mechanism for poor sleep quality should be assessed when treating chronic temporomandibular disorder patients.

We introduce the lower chaos grade of a real-valued function F defined on the Markov triple (E,μ,Γ), where μ is a probability measure and Γ is the carré du champ operator. As an application of this concept, we obtain the better estimate of the four moments theorem for Markov diffusion generators worked by Bourguin et al (2019). For our purpose, we need to find the largest number except zero in the set of eigenvalues corresponding to its eigenfunction in the case where the square of a random variable F, coming from a Markov triple structure, can be expressed as a sum of eigenfunctions, We give some examples of eigenfunctions of the diffusion generators such as Ornstein-Uhlenbeck, Jacobi and Romanovski-Routh. In particular, two bounds, called the four moments theorem and fourth moment theorem respectively, will be provided for the normal approximation of the case where a random variable F comes from eigenfunctions of a Jacobi generator.

We present a distributed optical-fiber temperature sensor with enhanced sensitivity based on an Al-coated fiber using the Rayleigh backscattering spectra (RBS) shift in optical frequency-domain reflectometry (OFDR). The Al-coated sensing fiber with a higher thermal expansion coefficient compared to silica produces a strain-coupled shift in the RBS under an increase in temperature. This effect leads to an enhanced temperature sensitivity of the distributed measurement scheme. Our results revealed that the temperature sensitivity obtained using the Al-coated fiber in OFDR was ~56% higher relative to that of a single-mode fiber. Moreover, the minimum measurable temperature recorded was 1 °C with a spatial resolution of 5 cm.

Hypoeutectic Al-Si-Cu-Mg alloys are promising candidates for use in automobile parts. Therefore, various attempts have been made to develop alternative casting technologies to improve the mechanical properties of cast alloys. In this study, the effects of modification with different levels of strontium (Sr) on primary and eutectic silicon (Si) in hypoeutectic Al-Si-Cu-Mg alloys were investigated. Using a gravity cast process, the Sr-modified samples were prepared from melts with four levels (100, 200, 300, and 400 ppm) of Sr. In addition, the wear properties of the cast samples were studied using a block-on-ring wear-testing machine. The sizes of the primary Si phases increased with increasing Sr content in the alloys. Moreover, more finely dispersed eutectic Si was observed with higher Sr content. In frictional wear tests, the specific wear rates of the test specimens decreased as the Sr content increased from 200 to 400 ppm. Coarse Si phases are considered to act as solid lubricants in the contact region during sliding.

The overcrowding of high-rise buildings in the city adversely affects the wind environment by changing the air currents in the surrounding areas. In particular, extreme climate phenomena caused by climate change are stronger and more frequent, causing social damages in cities. To comprehensively better understand the wind properties around high-rise buildings, actual filed measurement is necessary to determine the environment assessment of wind effect. We performed the on-site measurement on LCT residential complex regions (411.6m tall) with highly concentrated high-rise buildings in coastal city Busan, South Korea under extreme weather conditions such as typhoon invasions to determine wind fluid characteristics. In the field monitoring, five anemometers were installed to analyze the wind environment around high-rise buildings when typhoon 'Hinnamnor' invaded. Compared to the nearby weather station operated by KMA(Korea Meteorological Administration), the gust was 3.7 times stronger and the max 1 min-mean wind speed was 3.1 times stronger, and the characteristics of the downward wind and the canyon wind were shown depending on the location characteristics of the point. Turbulence intensity decreased as the wind speed increased and converged to a certain value. Likewise, the gust factor also decreased as the wind speed increased and converged to 2.0, which is considered to be the parameter that best represents the intensity of the instantaneous gust caused by the skyscraper wind effect.

Porcine epidemic diarrhea virus (PEDV) causes severe enteric disease in pigs, particularly neonatal piglets. Attempts to develop a safe and effective vaccine have been unsuccessful. Ginseng stem-leaf saponins (GSLS), a promising oral adjuvant candidate, can improve intestinal immune responses in poultry and mice. However, the low stability limits the further use. Poly lactic-co-glycolic acid (PLGA), a biocompatible and biodegradable nanoparticle, have been widely used in biomedicine for stable and targeted drug delivery. In this study, we developed GSLS-PLGA nanoparticles (GSLS-NPs) and evaluated the mucosal adjuvant efficacy in vitro and in vivo. GSLS-NPs significantly enhanced antigen internalization and pro-inflammatory cytokine secretion by DC2.4 cells. Mice orally administered GSLS-NPs before intramuscular inoculation generated CD11b+CD8α- and CD11b-CD103+ dendritic cells in the spleen and draining mesenteric lymph nodes, respectively, which are the types mainly responsible for antigen presentation. Additionally, enhanced neutralizing and non-neutralizing antibody responses and expanded activities of specific effector and memory CD4+ and CD8+ T cells were also observed in mice immunized with PEDV vaccines plus GSLS-NPs compared to mice receiving the vaccines alone. Furthermore, GSLS-NPs showed a good safety profile and presented great advantages over GSLS aqueous solution. Collectively, our results highlight the potential of GSLS-NPs as a mucosal adjuvant and provide an attractive vaccination strategy for combatting PEDV. Further study is required to evaluate the efficacy of this mucosal adjuvant in swine.

Mucosal vaccines can target specific mucosal surfaces, such as the respiratory, genital, or intestinal mucosa. Conventional systemic immunization, such as intramuscular injections, do not provide mucosal immunity, including IgA, nor do they prevent pathogens from entering the mucous membranes. Nasal immunization protects mucosal membranes, but nasal antigen presentation appears to entail adjuvant to stimulate immunogenicity. Current treatments for mucosal diseases such as inflammatory bowel disease (IBD) and allergic dermatitis only aimed to temporarily relieve symptoms. Moreover, these treatments not only have drug resistance or side effects, but the disease can recur, leading to switching to other treatments. Therefore, there is a need to develop safe and effective treatments that provide better long-term outcomes to reduce the risk of recurrence. Regulatory T (Treg) cells have been used to suppress inflammation. To find advances in mucosal treatment, we investigated the therapeutic effects of intranasal pep27 mutant immunization. Here, a new method of Treg induction through intranasal immunization without adjuvant has been developed to potentially overcome allergies and mucosal inflammation of the lung-gut axis in animal models. The implementation of the pep27 mutant for these therapies should be preceded by studies of Treg resilience through clinical translational studies of dietary changes.

A new study for CH4 reforming to hydrogen and hydrogen storage was performed using magnesium-based alloy. MgH2-12Ni (with the composition of 88 wt% MgH2 + 12 wt% Ni) was prepared in a planetary ball mill by milling in hydrogen atmosphere (reaction-involved milling). X-ray diffraction (XRD) analyses were performed for the samples after reaction-involved milling and after reactions with CH4. The variation of adsorbed or desorbed gas with time was measured by a Sieverts’ type high-pressure apparatus at 773 K. The microstructures of the powders were observed using scanning transmission microscope (STEM) with energy-dispersive X-ray spectroscopy (EDS). The synthesized samples were also characterized using Fourier Transform Infrared (FT-IR) spectroscopy. XRD pattern of MgH2-12Ni after reaction with CH4 of 12 bar at 773 K and decomposition under 1.0 bar at 773 K exhibited phases of MgH2 and Mg2NiH4. This shows that reforming of CH4 was occurred, hydrogen produced after reforming of CH4 was then adsorbed on the particles, and hydrides were formed during cooling to room temperature. Ni and Mg2Ni formed during heating up to 773 K are believed to have brought about catalytic effects for reforming CH4. MgH2-12Ni adsorbed 0.8 wt% reformed CH4 within 1 min in a reaction with CH4 of 12 bar at 773 K and then desorbed 0.8 wt% reformed CH4 (hydrogen-containing mixture) within 1 min under 1 bar at 773 K. Attenuated total reflectance FT-IR spectroscopy (ATR-FTIR) spectra of MgH2-12Ni after reactions under 12 bar CH4 at 723 K and 773 K showed peaks of C-H bending, C=C stretching, O-H stretching, O-H bending, and C-O stretching.

This research analyzed the impact of quality of service as perceived by Hapkido students on their exercise continuation and recommendation intentions. It also identified the measures to reduce the rate of student dropout, strengthen competitiveness, and create more efficient marketing strategies for consumer patterns that are rapidly diversifying Hapkido. A questionnaire survey method was conducted with 300 middle and high school students aged 14–19 years having Hapkido training of three months to two years in Incheon and Bucheon during March–April 2019. Frequency, factor, reliability, correlation, and standard multiple regression analyses were conducted on the surveyed data. The conclusions are as follows. First, considering the impact of service quality on exercise continuation intention, service quality positively affects reliability, personification, and perceptual openness; in terms of possibility, it positively affects typicality, personification, and perceptual openness; and in terms of reinforcement, it positively affects reliability and perceptual openness. Second, examining the impact of service quality on recommendation intention positively affects reliability, personification, and perceptual openness. Third, exercise continuation intention positively affects recommendation intention.

Mitochondria are highly dynamic organelles that continuously change their shape. Their main function is ATP production; however, they are additionally involved in a variety of cellular phenomena, such as apoptosis, cell cycle, proliferation, differentiation, reprogramming, and aging. The change in mitochondrial morphology is closely related to the functionality of mitochondria. Normal mitochondrial dynamics are critical for cellular function, embryonic development, and tissue formation. Thus, defect in proteins involved in mitochondrial dynamics that control mitochondrial fusion and fission can affect cellular differentiation, proliferation, cellular reprogramming, and aging. Here we review the processes and proteins involved in mitochondrial dynamics and its various associated cellular phenomena.

In this work, we report the electric energy storage properties of (1-x)Bi0.5(Na0.8K0.2)0.5TiO3-xBi0.2Sr0.7TiO3 (BNKT-BST; x = 0.15-0.50) relaxor ferroelectric ceramics enhanced via a domain engineering method. A rhombohedral–tetragonal phase, the formation of highly dynamic PNRs, and a dense microstructure are confirmed from XRD, Raman vibrational spectra, and microscopic investigations. The relative dielectric permittivity (2664 at 1 kHz) and loss factor (0.058) were gradually improved with BST (x=0.45). The incorporation of BST into BNKT can disturb the long-range ferroelectric order, lowering the dielectric maximum temperature Tm and inducing the formation of highly dynamic polar nano-regions. In addition, the Tm shifts toward high temperature with frequency and a diffuse phase transition, indicating relaxor ferroelectric characteristics of BNKT-BST ceramics, which is confirmed by the modified Curie Weiss law (γ=1.83). The rhombohedral–tetragonal phase, fine grain size, and lowered Tm with relaxor properties synergistically contribute to a high recoverable energy density Wrec of 0.81 J/cm3 and a high energy efficiency η of 86.95% at 90 kV/cm for x = 0.45.

Disposable absorbent hygiene products have evolved for superior performance, enhancing the convenience of daily lives. Yet the use of disposable hygiene pads has brought safety concerns on chemical exposure, and significant efforts have been made to assess the potential risks associated with use of hygiene pads. This article intends to overview the safety assessment framework of diapers and feminine pads, which includes hazard identification, hazard characterization, exposure assessment, risk characterization, and postmarket risk management. Risk assessment of various constituents are reviewed for quantification methods and conservative estimation of exposure parameters. By reviewing the up-to-date considerations in risk assessment, we aim to provide insightful discussion on safety evaluation of current versions of disposable absorbent products. More clinical testing and postmarket surveillance are needed for continuous monitoring of potential health impacts of advanced products and constituents.

(1) Background: The CEO message of hospital homepage contain various contents such as the hospital's future vision, promises with customers, upgraded services and public activities. The CEO’s message of the homepage includes non-financial information as well as financial information of corporates. Also, it provides useful information for not only company's goals and vision but also firm performance and strategies for the future. This study aims to investigate associations between CEO’s message of hospitals homepages and financial status. We used the balanced scorecard frame to analyze what content on the hospital's homepage is related to the hospital's various financial ratios. (2) Methods: We adopt a text mining method to extract significantly repeated keywords from the CEO’s message of hospital website. And we classify these keywords by a balanced scorecard frame. To examine the relationship between keywords of CEO’s message of the hospital homepage and hospital’s financial ratio, T-test is conducted for the difference in the TF-IDF (Term Frequency is Divided by Inverse Document Frequency) mean of the home page contents and its relationship with the views of the balanced scorecard framework. (3) Results: According to empirical results on 65 samples collected from local hospitals, there are some significant relationship between the qualitative content of the hospital's homepage and the quantitative financial ratio that indicates profitability, activity, leverage, liquidity, and transfer to essential business fund (EBF) income. (4) Conclusions: The introduction section of a homepage is most accessible to customers, containing the aims and ideals of hospitals and reflecting their values and visions [1]. In addition, in view of financial status, they can either emphasize financial strength or focus on other areas to mask weakness of financial information. This study reminds us of the importance of hospital website’s disclosure, and it can be inferred from the financial status of the hospital. It also highlights the need for harmonization between quantitative data, financial statements, and qualitative data, CEO’s messages. (5) Implications: To our best knowledge, this paper is the first research attempting to investigate the relation between text of hospital homepage and financial ratio of hospital through text mining technique and balanced scorecard frame. Hospitals take a crucial part in a country’s welfare and healthcare backbone industry. Nevertheless, in many countries, hospital organization sectors tend to remain a source of critical fiscal deficits due to its ineffective and sloppy management. We expect that the result of this paper can provide hospital managers to useful information.

Inflammation is known to be risk factors for metabolic diseases. The purpose of this study was to develop a Food-based Index of Dietary Inflammatory Potential (FBDI) and conduct its validation assessment. This study analyzed raw data from Korean Genome and Epidemiology Study 2012–2014 data of 17,771 people. We carried out the correlation analysis between 51 food groups and hs-CRP. The FBDI was developed by multiple regression method with hs-CRP and selected 17 food group. For the validation of FBDI, 7795 people in the 6th Korea National Health and Nutrition Examination Survey (KNHAES) was used. Binary logistic regression analysis was used for risk analysis of metabolic syndrome and FBDI. The FBDI model included that 7 were composed of anti-inflammatory food groups and 3 of inflammatory food groups. The FBDI was calculated by multiplying the intake of food group by β coefficients. KNHAES were included in the validation of FBDI. The risk of metabolic syndrome was found to be 2.152 times higher in the group with the highest FBDI than in the group with the lowest one (95% Cl:1.458–3.178, p for trend = 0.000). This study developed FBDI reflecting food intake for Koreans, which showed a significant relationship with the risk of metabolic syndrome.

In federated learning (FL), clients train models locally without sharing raw data, ensuring data privacy. In particular, federated distillation transfers knowledge to clients regardless of the model architecture. However, when groups of clients with different data distributions exist, sharing the same knowledge among all clients becomes impractical. To address this issue, this paper presents an approach that clusters clients based on the output of a client model trained using their own data. The clients are clustered based on the predictions of their models for each label on a public dataset. Prior knowledge of the number of groups is not required. Evaluations on the MNIST dataset showed that our method accurately identified these group structures and improved accuracy by 15–75% compared with traditional federated distillation algorithms when distinct group structures were present. Additionally, we observed significant performance improvements in smaller client groups, bringing us closer to fair FL.

Since the controllers of the variable speed seawater pump and the 3-way valve of a ship central cooling system receive the feedback signal from the same output, the two controllers may interfere and operate inefficiently under certain conditions. Therefore, studying an efficient control tuning method for the central cooling water system is necessary. The central cooling water system was modeled in this study using MATLAB Simulink, utilizing actual operation data, and unknown parameters are estimated to fine-tune. The model is then verified using another operating data set. Additionally, transfer functions are developed for freshwater output temperature against 3-way valve openness input and seawater pump motor electric power frequency input. Then, the two PI controllers are tuned through the Internal Model Control guide, supposing the two systems are decoupled. Moreover, the modified IMC tuning method is suggested for the seawater pump system, which has larger time constants because of a heat exchanger. This method simplifies combining the two PI controller tuning, enhancing the seawater pump's overall efficiency and 3-way valve operation. This study determined that the proposed tuning methods through the IMC guide confirmed the efficiency of controlling the seawater pump speed and 3-way valve with reasonable control of freshwater outlet temperature.

At the LHC, the process of a Higgs boson decaying into bottom or charm quarks produced in association with a pair of top quarks, tt¯H, allows for an empirical exploration of the heavy-flavor quark Yukawa couplings to the Higgs boson. Accordingly, the cross sections for the tt¯ + heavy-flavor production without the appearance of the Higgs boson have been measured at the LHC in various phase spaces using data samples collected in pp collisions at s = 7, 8 and 13 TeV with the ATLAS and CMS experiments. Flavor ratios of cross sections of tt¯ + additional jets processes with different flavors are also measured. In this paper, the measured cross sections and ratios are reviewed and the prospects with more data are presented.

Advanced glycation end products (AGEs) play a significant role in the aging processes, further regarding as a hallmark of aging. Despite the importance, a lack of monitoring tools has hampered the study of relationship between AGEs and aging. Here, we firstly report a novel AGEs-selective probe, AGO. AGO presented its ability to detect AGEs more sensitively than a conventional approach of measuring autofluorescence from AGEs. In addition, we confirmed that AGO can detect AGEs depending on kinetics, reflecting by a preference to ribose-derived AGEs. Finally, AGO revealed its competence to visualize glycation products in glycation mimicking model, made by collagen framework. We believe that this study will enrich molecular toolboxes to understand physiological processes of AGEs during aging processes.

Spectral image analysis has the potential to replace traditional approaches for assessing plant responses to different types of stress including herbicide, through non-destructive and high-throughput screening (HTS). Therefore, this study was conducted to develop a rapid bioassay method using a multi-well plate and spectral image analysis for diagnosis of herbicide activity and mode of action. Crabgrass (Digitaria ciliaris) as a model weed was cultivated in multi-well plates and subsequently treated with 6 herbicides with different modes of action when they reached the 1-leaf stage, using only a quarter of the recommended dose. To detect plant response to herbicides, plant spectral images were acquired after herbicide treatment using RGB, infrared (IR) thermal, and chlorophyll fluorescence (CF) sensors and analyzed for diagnosing herbicide efficacy and mode of action. Principal Component Analysis (PCA) using all spectral data successfully distinguished herbicides and clustered depending on their modes of action. The performed experiments have shown that the multi-well plate assay combined with spectral image analysis can be successfully applied for herbicide bioassay. In addition, the use of spectral image sensors, especially in CF image, would facilitate HTS by enabling rapid observation of herbicide response, as early as 3 hours after herbicide treatment.

Background: It is necessary to apply a behavior-based safety (BBS) program to prevent at-risk behavior. An effective BBS program requires the implementation of not only behavioral definitions and a customized critical behavior checklist (CBC) but also observations of behavior, coupled with customized interventions at power plants. Method: In this study, a customized CBC and behavioral definition were developed through a review of five different sites that previously used a CBC. The rules of observation, flow, and target were established to initiate the observations. Customized interventions were selected to increase safe behaviors. CBC scoring was used to evaluate observed safe behaviors for three years. Recognized safe behaviors were evaluated with a questionnaire that included four items each for conformity and participation behaviors and were then analyzed through a factor analysis and a t-test. The questionnaires were conducted three months before and after the implementation of the BBS program. Results: The customized CBC, behavioral definition, and interventions were effective, such that observed safe behaviors and the levels of workers’ recognized safe behaviors increased. Conclusion: The application of the BBS program was found to increase the observed and recognized safe behaviors. Therefore, the program applied to this site can help increase safe behaviors at other identical or similar sites, as well as prevent an accident, which also corresponds with the results of prior studies.

Glioblastoma (GBM) is a representative malignant brain tumor characterized by a dismal prognosis, with survival rates of less than 2 years and high recurrence rates. Despite surgical resection and several alternative treatments, GBM remains a refractory disease due to its aggressive invasiveness and resistance to anticancer therapy. In this report, we explore the role of fibronectin type III domain containing 3B (FNDC3B) and its potential as a prognostic and therapeutic biomarker in GBM. GBM exhibited a significantly higher cancer-to-normal ratio compared to other organs, and patients with high FNDC3B expression had a poor prognosis (p < 0.01). In vitro studies revealed that silencing FNDC3B significantly reduced the expression of Survivin, an apoptosis inhibitor, and also reduced cell migration, invasion, extracellular matrix adhesion ability, and stem cell properties in GBM cells. Furthermore, we identified that FNDC3B regulates PTEN/PI3K/Akt signaling in GBM cells using MetaCore integrated pathway bioinformatics analysis and a proteome profiler phospho-kinase array with sequential western blot analysis. Collectively, our findings suggest FNDC3B as a potential biomarker for predicting GBM patient survival and for the development of treatment strategies for GBM.

Rice is an important cereal crop worldwide, the growth of which is affected by rice blast disease, caused by the fungal pathogen Magnaporthe oryzae. As climate change increases the diversity of pathogens, the disease-resistance genes (R genes) in plants must be identified. The major blast-resistance genes have been identified in indica rice varieties; therefore, japonica rice varieties with R genes now need to be identified. Because leucine-rich repeat (LRR) domain proteins possess R-gene properties, we used bioinformatics analysis to identify the rice candidate LRR domain receptor-like proteins (OsLRR-RLPs). OsLRR-RLP2, which contains six LRR domains, showed differences in the DNA sequence, containing 43 single-nucleotide polymorphisms (SNPs) in indica and japonica subpopulations. The results of M. oryzae inoculation analysis indicated that indica varieties with partial deletion of OsLRR-RLP2 showed susceptibility, whereas japonica varieties with intact OsLRR-RLP2 showed resistance. oslrr-rlp2 mutant generated using clustered regularly interspaced palindromic repeats (CRISPR)/CRISPR-associated protein 9 (Cas9) showed increased pathogen susceptibility, whereas plants overexpressing this gene showed pathogen resistance. These results indicate that OsLRR-RLP2 confers resistance to rice, and OsLRR-RLP2 may be useful for breeding resistant cultivars.

Corrosive burns lead to progressive esophageal stricture and dysphagia. There are many trials to prevent Esophageal stricture formation after corrosive burn. This study aimed to access the effects of EW-7197 on prevention for esophageal stricture formation after corrosive esophageal burn. animal study were classified divided into three groups: a healthy group, a control group (corrosive burn without EW-7197), and a treatment group (corrosive burn with EW-7197). Corrosive esophageal burns were produced using 30% NaOH on the lower esophagus. For 3 weeks, the control group received vehicle and the treatment group received 20 mg/kg/day EW-7197. Treatment efficacy was assessed by measuring the stenosis ratio by esophagogram with contrast media on day 21. histologic staining was performed to evaluate the fibrosis area ratio, and western blotting was performed to evaluate fibrotic markers. Among 20 rats that underwent surgery, 14 survived. Three in the treatment group died because of esophageal perforation, and three in the control group died due to their debilitating status. The esophageal stenosis ratio was significantly lower in the treatment group than in the control group (12.1 ± 9.5% and 42.2 ± 8.3%, respectively; p = 0.001). The histologic fibrosis area ratio was also significantly lower in the treatment group (12.5 ± 3.0% and 21.6 ± 2.1%, respectively; p = 0.001). The treatment group showed lower expressions of profibrogenic proteins such as TGF-β1, pSmad3, and α-SMA. EW-7197 may be a good alternative for the prevention esophageal stricture formation after corrosive burn.

Liver cirrhosis is one of the most prevalent chronic liver diseases worldwide. In addition to viral hepatitis, genetic conditions such as steatohepatitis, autoimmune hepatitis, sclerosing cholangitis, and Wilson’s disease can also lead to cirrhosis. Moreover, alcohol can cause cirrhosis on its own and exacerbate chronic liver disease from other causes. The treatment of cirrhosis can be divided into addressing the cause of cirrhosis and reversing liver fibrosis. To this date, there is still no clear consensus on the treatment of cirrhosis. Recently, there has been a lot of interest in potential treatments that modulate the gut microbiota and gut-liver axis for the treatment of cirrhosis. According to recent studies, modulation of the gut microbiome by probiotics ameliorates the progression of liver disease. The precise mechanism for relieving cirrhosis via gut microbial modulation has not been identified. This paper summarizes the role and effects of the gut microbiome in cirrhosis based on experimental and clinical studies on absorbable antibiotics, probiotics, prebiotics, and synbiotics. Moreover, it provides evidence of a relationship between the gut microbiome and liver cirrhosis.

Resistive random-access memory has emerged as a promising non-volatile memory technology, garnering substantial attention due to its potential for high operational performance, low power consumption, and scalability. Two-dimensional nanostructured materials play a pivotal role in RRAM devices, offering enhanced electrical properties and physical attributes that contribute to overall device improvement. In this study, self-rectifying switching behavior in RRAM devices is proposed based on molybdenum disulfide nanocomposites decorated with palladium on SiO2/Si substrates. The integration of Pd and MoS2 at the nanoscale effectively mitigates leakage currents decreasing from cross-talk in the RRAM array, eliminating the need for a separate selector device. The successful demonstration of the expected RRAM switching behavior follows the application of a Pd nanoparticle coating. The fabricated Pd-MoS2 synaptic device showed a high current ratio for forward/reverse current higher than 60 at a low resistance state and observed a memory on/off ratio of 103 performing stable resistance switching behavior.

A study was conducted to predict failure stresses, failure locations, and their paths of initiation of perforated polymethyl methacrylate (PMMA) specimens as they were loaded using pins inserted into the holes. First, a series of experiments were conducted for perforated PMMA coupons. There were six different types of coupons. The test specimens had three different widths with a circular hole of a diameter of 8 mm, which was placed at two different locations along the specimen length. All the specimens were loaded using a pin inserted into the hole with three different pins of nominal diameters of 8 mm, 6 mm, and 5 mm, respectively. To predict the failure and compare the results against the experimental data, the recently proposed universal failure criterion was used in the study using finite element analyses. The failure criteria gave acceptable results as compared to the experimental data.

Reactive energetic plasticizers (REPs) coupled with hydroxy-telechelic poly(glycidyl azide-co-tetrahydrofuran) (PGT)-based energetic polyurethane (PU) binders for use in solid propellants and plastic-bonded explosives (PBXs) were investigated. The generation of gem-dinitro REPs along with a terminal alkyne stemmed from a series of finely designed approaches to not only satisfy the common demands as conventional energetic plasticizers but prevent the migration of plasticizers. The miscibility and rheological behavior of a binary mixture of PGT/REP with various REP fractions were quantitatively determined by differential scanning calorimetry (DSC) and rheometer, respectively, highlighting the promising performance of REPs in the formulation process. The kinetics on the distinct reactivity of propargyl vs. 3-butynyl species of REPs towards the azide group of the PGT prepolymer in terms of Cu-free azide-alkyne 1,3-dipolar cycloaddition (1,3-DPCA) was studied by monitoring 1H nuclear magnetic resonance spectroscopy and analyzing the activation energies (Ea) obtained using DSC. The thermal stability of the finally cured energetic binders with the incorporation of REPs indicated that the thermal stability of the REP/PGT-based PUs was maintained independently of the REP content. The tensile strength and modulus of the PUs increased with increasing the REP content. In addition, the energetic performance and sensitivity of REP and REP triazole species was predicted.

Precision metagenomic approaches using Oxford Nanopore Technology (ONT) sequencing has been shown to allow recovery of complete genomes of Escherichia coli O157:H7 from overnight enrichments of agricultural waters. This study tests the applicability of a similar approach for Cronobacter genome recovery from powdered infant formula (PIF) overnight enrichments, where Cronobacter typically dominates the overall microbiome (&gt;90%). In this study, we aimed to test whether using ONT sequencing of overnight PIF enrichments could recover a completely closed Cronobacter genome for further genomic characterization. Ten PIF samples, each inoculated with different Cronobacter strains, covering Cronobacter sakazakii, C. muytjensii, C. dublinensis, C. turicensis, and C. universalis, were processed according to the Bacteriological Analytical Manual (BAM) protocol. qPCR was used for initial screening (detection and quantification) of the overnight enrichments and confirmed that the spiked PIF samples after the overnight enrichment have high levels of Cronobacter (107 to 109 CFU/mL). DNA from overnight PIF enrichments was extracted from the enrichment broth and sequenced using ONT. Results showed that ONT sequencing could accurately identify, characterize, and close the genomes of Cronobacter strains from overnight PIF enrichments in 3 days, much faster than the nearly two weeks required by the current BAM method. Complete genome recovery and species differentiation were achieved. This suggests that combining qPCR with ONT sequencing provides a rapid, cost-effective alternative for detecting and characterizing Cronobacter in PIF, enabling timely corrective actions during outbreaks.

Hemangioblasts give rise to endothelial progenitor cells (EPCs), which also express the cell surface markers CD133 and C-kit. They may differentiate into the outgrowth endothelial cells (OECs) that control neovascularization in the developing embryo. Reduced levels of EPC in circulation have been linked to human cardiovascular disorders, according to numerous studies. Furthermore, preeclampsia and senescence have been linked to levels of EPCs produced from cord blood. Uncertainties surround how preeclampsia affects the way EPCs function. It is reasonable to speculate that preeclampsia may have an impact on the function of fetal EPCs during the in utero period; however, given the present literature's suggestion that maternal vasculopathies, including preeclampsia, damage fetal circulation. Additionally, the differentiation potential and general activity of EPCs may serve as an indicator of the health of the fetal vascular system since they promote neovascularization and repair during pregnancy. Thus, the purpose of this review is to compare, through assessment of their quantity, differentiation potency, angiogenic activity, and senescence, the angiogenic function of fetal EPCs obtained from cord blood for normal and pregnancy problems. This will shed light on the relationship between the angiogenic function of fetal EPCs and pregnancy complications, which could have an effect on the management of long-term health issues like metabolic and cardiovascular disorders in offspring with abnormal vasculature development.

Landslides impact on human activities and socio-economic development especially in mountainous areas. This study focuses on the comparison of the prediction capability of advanced machine learning techniques for rainfall-induced shallow landslide susceptibility of Deokjeokri catchment and Karisanri catchment in South Korea. The influencing factors for landslides i.e. topographic, hydrologic, soil, forest, and geologic factors are prepared from various sources based on availability and a multicollinearity test is also performed to select relevant causative factors. The landslide inventory maps of both catchments are obtained from historical information, aerial photographs and performing field survey. In this study, Deokjeokri catchment is considered as a training area and Karisanri catchment as a testing area. The landslide inventories content 748 landslide points in training and 219 points in testing areas. Three landslide susceptibility maps using machine learning models i.e. Random Forest (RF), Extreme Gradient Boosting (XGBoost) and Deep Neural Network (DNN) are prepared and compared. The outcomes of the analyses are validated using the landslide inventory data. A receiver operating characteristic curve (ROC) method is used to verify the results of the models. The results of this study show that the training accuracy of RF is 0.757 and the testing accuracy is 0.74. Similarly, training accuracy of XGBoost is 0.756 and testing accuracy is 0.703. The prediction of DNN revealed acceptable agreement between susceptibility map and the existing landslides with training and testing accuracy of 0.855 and 0.802, respectively. The results showed that, the DNN model achieved lower prediction error and higher accuracy results than other models for shallow landslide modeling in the study area

Introduction: This study explored the structural relationship between peer relations, exercise participation satisfaction, exercise commitment, and adherence to intention to exercise among Korean sports club participants. The objective was to offer insights that can enhance intentions for continuous exercise participation. Methods: To fulfill this objective, data were gathered using snowball sampling from teenagers at middle schools in Seoul and Gyeonggi, South Korea, who either currently participate in school sports clubs or have participated in the past. A total of 261 responses were analyzed using frequency, technical statistics, and confirmatory factor, reliability, correlation, and structural equation model analyses. Results: Through these analyses, this study found that peer relationships, exercise participation satisfaction, and exercise commitment were significant as both direct and indirect influences on exercise adherence intentions. Discussion: Intervention strategies should focus on fostering the positive emotions that stem from peer relationships.

Let ${\mathcal{SR}}^*$ be the class of starlike functions with real coefficients, i.e., the class of analytic functions $f$ which satisfy the condition $f(0)=0=f'(0)-1$, Re{z f'(z) / f (z)} > 0, for $z\in\mathbb{D}:=\{z\in\mathbb{C}:|z|<1 \}$ and $a_n:=f^{(n)}(0)/n!$ is real for all $n\in\mathbb{N}$. In the present paper, the sharp estimates of the third Hankel determinant $H_{3,1}$ over the class ${\mathcal{SR}}^*$ are computed.

Cryptotanshinone (CTT) is a natural product and a quinoid diterpene isolated from the root of the Asian medicinal plant, Salvia miltiorrhiza bunge. Notably, CTT has a variety of anti-cancer actions, including the activation of apoptosis, anti-proliferation, and a reduction in angiogenesis. We further investigated the anti-cancer effects of CTT in A549 and H460 which are NSCLC cell lines. CTT treatment in NSCLC cells reduced cell growth through PI3K/Akt/GSK3β pathway inhibition, G0 / G1 cell cycle arrest, and the activation of apoptosis. CTT induced increase of Bax and cleavage of apoptosis-related signaling such as caspase-3, caspase-9, poly-ADP-ribose polymerase (PARP), and Bax, as well as inhibition of anti-apoptosis related signaling such as Bcl-2, survivin, and cellular-inhibitor of apoptosis protein 1 and 2 (cIAP-1 and -2). It also induced G0/G1 phase cell cycle arrest by decreasing the expression of cyclin A, cyclin D, cyclin E, Cdk 2, and Cdk 4. In addition, CTT reduced the protein expression of the PI3K/Akt/GSK3β signaling pathway related to cell proliferation. These results highlight the latent potential of CTT as natural therapeutic agent for NSCLC.

In this study, we used statistical models to analyze nonlinear behavior links with atmospheric teleconnections between hydrometeorological variables and Indian Ocean Dipole (IOD) mode over the East Asia (EA) region. The analysis of atmospheric teleconnections was conducted using principal component analysis and singular spectrum analysis techniques. Moreover, the nonlinear lag-time correlations between climate indices and hydrological variables were calculated using mutual information (MI) techniques. The teleconnection-based nonlinear correlation coefficients (CCs) were higher than the linear CCs in each lag time. Additionally, we documented that the IOD has a direct influence on hydro-meteorological variables, such as precipitation within the Korean Peninsula (KP). Moreover, during the warm season (June to September) the variation of hydro-meteorological variables in the KP demonstrated significantly decreasing patterns during positive IOD years and they have neutral conditions during negative IOD years in comparison with long-term normal conditions. Finally, the revealed relationship between climate indices and hydro-meteorological variables and their possible changes will allow better understanding of stakeholder decision-making regarding to manage of freshwater management over the EA region. It can also provide useful data for long-range water resources prediction, to minimize hydrological uncertainties in a changing climate.

Robot-assisted gait training (RAGT) is a promising treatment for stroke rehabilitation. Although the coordination between the upper and lower limbs is important for locomotor training, commercially available robotics for gait training mainly focus on the restoration of lower limb function. We aimed to evaluate the feasibility and usability of complex upper and lower limb RAGT in stroke patients using the GTR-A®, end effector-type robotic device. Patients with subacute stroke (N=9) received 30-minute RAGT thrice a week for two weeks (six sessions). Functionally, the hand grip strength (HGS), Functional Ambulatory Categories, modified Barthel Index, muscle strength test sum score, Berg Balance Scale, Timed Up and Go test, and Short Physical Performance Battery were used. The heart rate and a structured questionnaire were used to evaluate cardiorespiratory fitness and the usability of RAGT. Among the nine patients, all functional parameters between the baseline and post-training were significantly improved after RAGT, except for HGS and the muscle strength test. The questionnaire’s mean scores for each domain were as follows: safety 4.40±0.35, effects 4.23±0.31, efficiency 4.22±0.77, and satisfaction 4.41±0.25. The GTR-A® is a feasible and safe robotic device for patients with gait impairment after stroke. It showed functional improvement with endurance training effects.

This paper presents a simple and streamlined compensation technique for improving the quality of Synthetic Aperture Radar (SAR) images based on the Range Doppler Algorithm (RDA). Incorrect Doppler estimation in space orbit, caused by unexpected radar motion errors, orbit mismatches, and other factors, can significantly degrade SAR image quality. These inaccuracies result in mismatches between the azimuth-matched filter and the received Doppler chirp signal. To address this issue, we propose a Doppler estimation method that leverages the Fractional Fourier Transform (FrFT) and cross-correlation techniques. The received signals are compared with the azimuth-matched filter based on the rotation angle in the FrFT domain, and the Doppler centroid is adjusted to achieve optimal alignment. This process ensures high correlation values and enhanced resolution in the final SAR image. The efficacy of the proposed technique is validated through experiments using real spaceborne SAR data from the practical satellite. The results demonstrate significant improvements in image quality and resolution compared to conventional algorithms, highlighting the advantages of our approach for various remote sensing applications.

Maternal hyperglycemia, induced by gestational diabetes mellitus (GDM), has detrimental effects on fetal vascular development, ultimately increasing the risk of cardiovascular diseases in offspring. The potential underlying mechanisms by which these complications occur are through functional impairment and epigenetic changes in fetal endothelial progenitor cells (EPCs), however, remain less defined. We confirm that intrauterine hyperglycemia leads to impaired angiogenic function of fetal EPCs, as observed through functional assays of outgrowth endothelial cells (OECs) derived from fetal EPCs of GDM pregnancies (GDM-EPCs). Notably, PCDH10 expression is increased in OECs derived from GDM-EPCs, which is associated with the inhibition of angiogenic function in fetal EPCs. Additionally, increased PCDH10 expression is correlated with hypomethylation of the PCDH10 promoter. Our findings demonstrate that in utero exposure to GDM can induce angiogenic dysfunction in fetal EPCs through altered gene expression and epigenetic changes, consequently increasing the susceptibility to cardiovascular diseases in offspring of GDM mothers.

The objective of this study is to design and synthesize substituted η6-chromium tricarbonyl metal complexes carrying o-carborane units as potential boron neutron capture therapy (BNCT) agents. In this study, 1,2-Diphenyl-o-carborane units were used as starting materials to generate biologically active species. We investigated how the structural changes of 1,2-diphenyl-o-carborane substituted with chromium(0) tricarbonyl affect the biological properties; [(CO)3Cr]Ph2C2 (2) and [(CO)3Cr]2Ph2C2 (3) species were produced in moderate yields. The molecular structures of compounds 1–3 were identified and established by infrared (IR), 1H, 11B, and 13C nuclear magnetic resonance (NMR), and X-ray crystallography analyses. Crystal structures of o-carboranyl chromium complexes 1 [a = 10.859(1) Å, b = 24.953(3) Å, c = 13.938(2) Å, β = 111.854(2)º], 2 [a = 10.621(3) Å, b = 17.056(5) Å, c = 12.174(4) Å, β = 106.622(5)º], and 3 [a = 17.540(2) Å, b = 18.060(2) Å, c = 19.484(4) Å, α = 105.746(2)º, β = 110.226(2)º, γ = 91.256(2)º] were obtained. In vitro study using B16 and CT26 cancer cells containing the triphenyl-o-carboranyl chromium (0) complexes Ph3C2BCr2 and Ph3C2BCr3, which we have previously reported, the compounds 2 and 3 accumulated at higher levels than compounds Ph3C2BCr2 and Ph3C2BCr3. However, the phenylated o-carboranyl chromium(0) complexes have been found to be more cytotoxic than p-boronophenylalanine (BPA).

Purpose: To report the early clinical outcomes of combining intensity‐modulated radiation therapy (IMRT) and intensity‐modulated proton therapy (IMPT) in comparison with IMRT alone in treating the oropharynx cancer (OPC) patients. Materials and Methods: The medical records of 148 OPC patients were retrospectively reviewed, who underwent definitive radiotherapy (RT) with concurrent systemic therapy, from January 2016 till December 2019 at Samsung Medical Center. During the 5.5 weeks’ RT course, the initial 16 (or 18) fractions were delivered by IMRT in all patients, and the subsequent 12 (or 10) fractions were either by IMRT in 81 patients (IMRT only) or by IMPT in 67 (IMRT/IMPT combination), respectively, based on comparison of adaptive re-plan profiles and availability of equipment. Propensity‐score matching (PSM) was done on 76 patients (38 from each group) for comparative analyses. Results: With the median follow‐up of 24.7 months, there was no significant difference in overall survival and progression free survival between groups, both before and after PSM. Before PSM, IMRT/IMPT combination group experienced grade ≥3 acute toxicities less frequently: mucositis in 37.0% and 13.4% (p<0.001); and analgesic quantification algorithm (AQA) in 37.0% and 19.4% (p=0.019), respectively. The same trends were observed after PSM: mucositis in 39.5% and 15.8% (p=0.021); and AQA in 47.4% and 21.1% (p=0.016), respectively. In multivariate logistic regression, grade ≥3 mucositis was significantly less frequent in IMRT/IMPT combination group, both before and after PSM (p=0.027 and 0.024, respectively). AQA score ≥3 was also less frequent in IMRT/IMPT combination group, both before and after PSM (p=0.085 and 0.018, respectively). Conclusions: In treating the OPC patients, with comparable early oncologic outcomes, more favorable acute toxicity profiles were achieved following IMRT/IMPT combination than IMRT alone.

Background The increasing number of elderly individuals in South Korea, now entering a super-aging era, underscores the growing importance of understanding their specific oral health needs. This study investigated changes in oral health conditions, salivary parameters, halitosis, systemic diseases, and medication usage with aging. Methods This study was retrospectively conducted using the medical records of patients who presented with complaints of xerostomia or halitosis between August 2020 and May 2023. A total of 274 patients (66 males, 208 females, mean age 59.39 ± 16.10 years) were included in this study. Results Aging was found to be significantly associated with the presence of sticky saliva, poor oral hygiene, tongue coating, and halitosis (all p < 0.05). Correlation analyses further revealed significant associations between aging and several conditions, including hypertension (r = 0.495, p < 0.001), diabetes mellitus (r = 0.255, p < 0.001), amlodipine usage (r = 0.249, p = 0.001), osteoporosis (r = 0.195, p = 0.001), cardiovascular disease (r = 0.150, p = 0.013), and the presence of tongue coating (r = 0.205, p = 0.001). Conversely, none of the salivary parameters demonstrated a significant relationship with aging. Furthermore, halitosis did not exhibit significant differences across age groups (all p > 0.05), with the exception of methyl mercaptan levels, which were notably higher among patients in their 20s (p = 0.049). Conclusions The findings of this study can help clinicians develop targeted strategies to address specific oral health challenges associated with aging in elderly patients.

In this paper, we introduce the partially degenerate Changhee-Genocchi polynomials and numbers and investigated some identities of these polynomials. Furthermore, we investigate some explicit identities and properties of the partially degenerate Changhee-Genocchi arising from the nonlinear dierential equations.

During early embryonic development, fertilized one-cell embryos develop into preimplantation blastocysts and subsequently establish three germ layers through gastrulation during post-implantation development. In recent years, stem cells have emerged as a powerful tool to study embryogenesis and gastrulation without the need for eggs, allowing the generation of embryo-like structures known as synthetic embryos or embryoids. These in vitro models closely resemble early embryos in terms of morphology and gene expression and provide a faithful recapitulation of early pre- and post-implantation embryonic development. Synthetic embryos can be generated through a combinatorial culture of three blastocyst-derived stem cell types, such as embryonic stem cells, trophoblast stem cells, and extraembryonic endoderm cells, or totipotent-like stem cells alone. This review provides an overview of the progress and various approaches in studying in vitro embryogenesis and gastrulation using stem cells. Furthermore, recent findings and breakthroughs in synthetic embryos and gastruloids are outlined. Despite ethical considerations, synthetic embryo models hold promise for understanding mammalian (including human) embryonic development and have potential implications for regenerative medicine and developmental research.

In this paper, we investigate a new $q$-analogue of the higher order degenerate Changhee polynomials and numbers, which are called the Witt-type formula for the $q$-analogue of degenerate Changhee polynomials of order $r$. We can derive some new interesting identities related to the degenerate $(h,q)$-Changhee polynomials and numbers.

Kim-Kim ([9]) studied some properties of the degenerate gamma and degenerate Laplace transformation and obtained their properties. In this paper, we define modified degenerate gamma and modified degenerate Laplace Transformation and investigate some properties and formulas related to them.

Fluorescent bioprobes are invaluable tools for visualizing live cells and deciphering complex biological processes by targeting intracellular biomarkers without disrupting cellular functions. In addition to protein-binding concepts, fluorescent probes utilize various mechanisms, including membrane, metabolism, and gating-oriented strategies. This study introduces a novel fluorescent mechanism distinct from existing ways. Here, we developed a B-cell selective probe, CDrB, with unique transport mechanisms. Through SLC-CRISPRa screening, we identified two transporters, SLCO1B3 and SLC25A41, by sorting out populations exhibiting higher and lower fluorescence intensities, respectively, demonstrating contrasting activities. We confirmed that SLCO1B3, with comparable expression levels in T and B cells, facilitates the transport of CDrB into cells, while SLC25A41, overexpressed in T lymphocytes, actively exports CDrB. The observation suggests that SLC25A41 plays a crucial role in discriminating between T and B lymphocytes. Furthermore, it reveals the potential for reversible localization of SLC25A41 to demonstrate its distinct activity. This study is the first report to unveil a novel strategy of SLC by exporting the probe. We anticipate that this research will open up new avenues for developing fluorescent probes.

Impact characterization of linear resonant actuator (LRA) is studied experimentally by newly developed drop tester, which can control various experimental uncertainty such as rotational moment, air resistance, secondary impact and so on. The feasibility of this test apparatus was verified by comparison with free fall test. By utilizing a high-speed camera and measuring the vibrational displacement of spring material, the impact behavior was captured and the damping ratio of the system was defined. Based on the above processes, the finite element model was established and the experimental and analytical results were successfully correlated. Finally, the damage of the system from impact loading can be expected by developed model and as a result, this research can improve the impact reliability of LRA.

A cryptic invader of the genus Persicaria is recently increasing in the damper, northern parts of La Palma and Gran Canaria in the Canary Islands (Spain) and locally behaves as an invasive species. Examination of historical herbarium specimens showed this species to be present in Gran Canaria since the 1960’s and the same probably applies to La Palma. Up to now, this species had been assigned to the Old World weed P. maculosa. However, morphologically these plants clearly correspond with P. hydropiperoides, a common and widespread weed native to the New World, and morphologically similar indeed to P. maculosa. Diagnostic features for these two species, as well as for another similar species (P. decipiens, originally described from the Canary Islands), are compared, thoroughly discussed and copiously illustrated. The current distribution, ecology and naturalization status of P. hydropiperoides in the Canary Islands are also assessed. The variability of P. hydropiperoides is discussed, more precisely the taxonomic position of a southern ‘race’ of it that is sometimes referred to as a distinct species, P. persicarioides. In addition to our morphology-based study, a molecular phylogenetic analysis has been conducted on the nuclear ITS region and the plastid DNA region trnL-F.

Synthetic polymer-based gradient foams have considered as promising category of functionally graded materials with unique properties. In this study, the carbon dioxide (CO₂) foaming technology has used for PET-PEN (Polyethylene Terephthalate - Polyethylene Naphthalate) copolymer towards porous functional materials with thermal insulation with reasonable mechanical strength. Through scanning electron microscope based morphological characterization, a potential to fabricate gradient foam structures with micro-pores has identified. It has shown that variation of post-foaming temperature can tune the pore size distribution although the very high post-foaming temperature tends to cause structural instability. Thermal measurement data set the limits of operation, confirmed by simultaneous differential scanning calorimeter and thermo-gravimetric analysis. Mechanical stress and thermal conductivity also has measured to find rationale of thermal insulation with reasonable mechanical strength and to elucidate the actual 3D grid foam of copolymer.

Global Positioning System (GPS) stations located along coastal areas have the ability to measure tide gauge (TG) records by reflected signal reception from the sea water surface. In this study we used the GPS signal-to-noise ratio (SNR) data from the SEPT station (44.63 ⁰N, 124.05 ⁰W) located at South Beach, Oregon, USA, to estimate the TG records using only a few measurements. First, we derived the TG record from a GPS station (GPS-TG) and used traditional TG data from the National Water Level Observation Network (NWLON) sentinel station (Station ID: 9435380) located in Oregon for validation purposes because it was closest to the SEPT station. Our results show that the GPS-TG and NWLON-TG correlate well with the correlation coefficient (CC) of 0.942 and the root mean square (RMS) of their residuals was about 12.90 cm. The corresponding TG prediction by autoregressive moving average (ARMA-TG) and singular spectrum analysis (SSA-TG) models are evaluated for their effectiveness over the station. The comparative analysis demonstrates that the GPS-TG has improved correlation with ARMA-TG (CC of ~0.981 CC, RMS of ~4.80 cm), and SSA-TG (CC of ~0.998 CC, RMS of ~ 0.88 cm) compared to the NWLON-TG (CC of ~0.942 CC, RMS of ~12.90 cm) values. We believe the outcomes from this study contribute to a better understanding of the numerical modeling of TG records as well as other measurements based on reflectometry techniques.

The clinical application of collagen-based biomaterials is expanding rapidly, especially in tissue engineering and cosmetics. While oral supplements and injectable skin boosters are popular for enhancing skin health, clinical evidence supporting their effectiveness remains limited. Injectable products show potential in revitalizing skin, but safety concerns persist due to challenges in sterilization and the risk of biological contamination. Traditional methods of sterilization (heat and irradiation) can denature collagen. This study addresses these issues by introducing a novel technique: double filtration and low-temperature steam sterilization of a collagen gel. In vitro tests document sterility and confirm that the collagen structure remained intact without modification. An in vivo study found no adverse effects in rats or significant lesions at the implantation site over 13 weeks. These results suggest that this novel method to process collagen gels is a safe and effective skin booster. Advanced processing methods are likely to mitigate safety risks associated with injectable collagen products, though further research is needed to validate their biological effectiveness and clinical benefits.

Understanding the ionic channel network of proton exchange membranes, which dictate fuel cell performance, is crucial when developing proton exchange membrane fuel cells. However, itis difficult to characterize due to complicated nano structure and differing changes to their structure with different amounts of water uptake. Electrostatic force microscopy (EFM) can map surface charge distribution as nano special resolution by measuring the electrostatic force between a vibrating conductive tip and a charged surface under an applied voltage, . In this study, the ionic channel network of a proton exchange membrane is analyzed using EFM. A mathematical approximation model of the ionic channel network is first derived, to explain changes in force gradient on the surface using EFM. The phase lag of dry and wet Nafion under stepwise changes to bias voltage is then measured. Based on the model, variations in the ionic channel network of Nafion with different amounts of water uptake are analyzed numerically. The mean surface charge density of both membranes, which is connected with the ionic channel network, is calculated using the model. The results show that the difference between the mean surface charge of the dry and wet membranes is consistent with the variation in their proton conductivity.

We examined how combinations of corporate social responsibility (CSR) activities lead to high performance in Korean companies. This study addressed two related questions to expand our limited knowledge in this area. The first was what combinations of CSR activities achieve high performance. The second was to identify how CSR activities form an interdependent system, depending on different corporate situations. Korean Economic Justice Institute index data, from 2012 to 2018, were used with fuzzy set qualitative comparative analysis, and the results revealed several effective CSR activity factor combinations under given strategies and management environments. Companies with high performance exhibit complementarity between social contribution, environmental management, fairness, and employee satisfaction. By contrast, companies with low corporate performance show no complementarity between relatively unrelated activity factors. For companies whose CSR activities lead to low financial performance, most of the causal pathways focused only on activities at the primary stakeholder level, with weak diversity of CSR activities’ combinations at the primary and secondary stakeholder levels. These results indicate not only the appropriateness of CSR activity factor combinations for companies’ strategy and management environment contexts, but also their effectiveness, and are expected to provide companies with significant implications for CSR activities.

Inflammatory bowel disease (IBD), including ulcerative colitis and Crohn's disease, is a complex gastrointestinal disorder with a multifactorial etiology, including environmental triggers, autoimmune mechanisms, and genetic predisposition. Despite advancements in therapeutic strategies for IBD, its associated mortality rate continues to rise, which is often attributed to unforeseen side effects of conventional treatments. In this context, we explored the potential of Ecklonia cava extract (ECE) derived from an edible marine alga known for its anti-inflammatory and antioxidant properties in mitigating IBD. This study investigated the effectiveness of ECE as a preventive agent in a murine model of dextran sulfate sodium (DSS)-induced colitis. Our findings revealed that pretreatment with ECE significantly ameliorated colitis severity as evidenced by increased colon length, reduced spleen weight, and histological improvements demonstrated by immunohistochemical analysis. Furthermore, ECE significantly attenuated the upregulation of inflammatory cytokines and mediators and the infiltration of immune cells known to be prominent features of colitis in mice. Notably, ECE restored dysbiosis of intestinal microflora and aided in the recovery of damaged intestinal mucosa. Mechanistically, ECE exhibited protective effects against pathogenic colitis by inhibiting the NLRP3/NF-κB pathway known to be pivotal regulators in the inflammatory signaling cascade. These compelling results suggest that ECE holds promise as a potential candidate for IBD prevention. It might be developed into a functional food for promoting gastrointestinal health. This research sheds light on the preventive potential of natural compounds like ECE in the management of IBD, offering a safer and more effective approach to combating this challenging disease.

This paper treats the connection problem of expressing sums of finite products of Chebyshev polynomials of the third and fourth kinds in terms of five classical orthogonal polynomials. In fact, by carrying out explicit computations each of them are expressed as linear combinations of Hermite, generalized Laguerre, Legendre, Gegenbauer, and Jacobi polynomials which involve some terminating hypergeometric functions ${}_2 F_0, {}_2 F_1$, and ${}_3 F_2$.

The current study investigated the use of two-dimensional spatial distribution mapping representing the chlorophyll-a level in a river generated via an unmanned aerial vehicle (UAV) and an unmanned surface vehicle (USV). A domestically developed UAV (Remo-M, Uconsystem Inc., Korea) and a USV developed by our research team were used to collect data from the Nae Seong stream in Korea. An adaptation of the “Data Cleaner” tool was developed and used for USV data processing and analysis. The operation of the autonomous USV was successful. Four previously described indices for quantifying algal blooms in rivers were utilized to create chlorophyll-a images, the normalized difference vegetation index (NDVI), the normalized green red difference index, the green normalized difference vegetation index (GNDVI), and the normalized difference red edge index. The suitability of the linear regression analysis of the correlation between the spectral indices obtained using the UAV and the in situ chlorophyll-a data obtained using the USV was evaluated with the coefficient of determination (R2) at a significance level of p &lt; 0.001. In field application and correlational analysis the NDVI was strongly correlated with chlorophyll-a (R2 = 0.88, p < 0.001), and the GNDVI was moderately correlated with chlorophyll-a (R2 = 0.74, p < 0.001). The map of chlorophyll-a was successfully quantified using the UAV and USV hybrid platforms.

Antimicrobial peptides (AMPs) have emerged as a promising solution to tackle bacterial infections and combat antibiotic resistance. However, their clinical application has been hindered by their vulnerability to protease degradation and toxicity towards mammalian cells. To overcome these challenges, our study aims to develop a method to enhance the stability and safety of AMPs, applicable to effective drug-device combination products. KR12 antimicrobial peptide was chosen and in order to further enhance its delivery and efficacy, HIV TAT protein-derived cell-penetrating peptide (CPP) was fused to form CPP-KR12. A new product, CPP-KR12@Si, was developed by forming silica nanoparticles with self-entrapped CPP-KR12 peptide using the biomimetic silica precipitability due to its cationic nature. Peptide delivery from CPP-KR12@Si to bacteria and cells was delivered at a slightly delayed rate with improved stability against trypsin treatment and a reduction in cytotoxicity over CPP-KR12. Finally, the antimicrobial potential of CPP-KR12@Si/bone graft substitute (BGS) combination product was demonstrated, which is coated with CPP-KR12 in the form of nanoparticles on the surface of BGS. Self-entrapped AMP in silica nanoparticles is a safe and effective AMP delivery method that will be useful for developing a drug/device combination product for tissue regeneration.

In this paper, we study sums of finite products of Chebyshev polynomials of the first kind and Lucas polynomials and represent each of them in terms of Chebyshev polynomials of all kinds. Here the coefficients involve terminating hypergeometric functions ₂F₁ and these representations are obtained by explicit computations.

In this study, carbon blocks were fabricated using isotropic coke and coal tar pitch as raw materials, with a variation in pressure during cold isostatic pressing (CIP). The CIP pressure was set to 50, 100, 150, and 200 MPa, and the effect of the CIP pressure on the mechanical and electrical properties of the resulting carbon blocks was analyzed. Microstructural observations confirmed that after the kneading, the surface of isotropic coke was covered with the pitch components. Subsequently, after the CIP, granules, which were larger than isotropic coke and the kneaded particles, were observed. The formation of these granules was attributed to the coalescence of kneaded particles under the applied pressing pressure. This granule formation was accompanied by the development of pores, some remaining within the granules, while others were extruded, thereby existing externally. The increase in the applied pressing pressure facilitated the formation of granules, and this microstructural development contributed to enhanced mechanical and electrical properties. At a pressing pressure of 100 MPa, the maximum flexural strength was achieved at 33.3 MPa, and the minimum electrical resistivity was reached at 60.1 μΩm. The higher the pressing pressure, the larger the size of the granules. Pores around the granules tended to connect and grow larger, forming crack-like structures. This microstructural change led to degraded mechanical and electrical properties. The isotropic ratio of the carbon blocks obtained in this study was estimated based on the coefficient of thermal expansion (CTE). The results confirmed that all carbon blocks obtained proved to be isotropic. In this study, a specimen type named CIP-100 exhibited the best performance in every aspect as an isotropic carbon block.

This paper is concerned with representing sums of finite products of Chebyshev polynomials of the second kind and of Fibonacci polynomials in terms of several classical orthogonal polynomials. Indeed, by explicit computations each of them is expressed as linear combinations of Hermite, generalized Laguerre, Legendre, Gegenbauer and Jacobi polynomials which involve the hypergeometric functions ${}_1 F_1$ and ${}_2 F_1$.

This article combines the traditional definition of portfolio risk with minimum spanning tree based “interconnectedness risk" to improve the equal risk contribution portfolio performance. We use betweenness centrality to measure an asset’s importance in a market graph (network). After filtering the complete correlation network to a minimum spanning tree, we calculate the centrality score and convert it to a centrality heuristic. We develop an adjusted variance-covariance matrix using the centrality heuristic, to bias the model to assign peripheral assets in the minimum spanning tree higher weights. We test this methodology using the constituents of the S&amp;P 100 index. The results show that the centrality equal risk portfolio can improve upon the base equal risk portfolio returns, with a similar level of risk. We observe that during bear markets, the centrality-based portfolio can surpass the base equal risk portfolio risk.

Post-translational modifications (PTMs) represent a cornerstone in the complexity of the proteome, significantly contributing to diversifying protein structure and function. PTMs can significantly influence protein function, stability, localization, and interactions with other molecules. Therefore, it is important when choosing a protein expression system to ensure the precise incorporation of PTMs during protein synthesis, which is paramount for producing biologically active proteins. Cell-free protein synthesis (CFPS) system has emerged as a powerful protein synthesis platform and research toolkit in synthetic biology. The open nature of the system allows the reaction environment to be tailored to any protein of interest to promote specific PTMs, thus allowing for the production of a protein with the desired modifications. This review presents various PTMs achieved in the CFPS systems, providing insights into the current challenges, successes, and future prospects.

Congenital anomalies of the kidney and urinary tract (CAKUT) are common birth defects deriving from abnormalities in renal differentiation during embryogenesis. CAKUT is the major cause of end-stage renal disease and chronic kidney diseases in children, but its genetic causes remain largely unresolved. Here we discuss advances in the understanding of how MAPK/ERK activity contributes to the regulation of ureteric bud branching morphogenesis, which dictates the final size, shape, and nephron number of the kidney. Recent studies also demonstrate that MAPK/ERK pathway is directly involved in nephrogenesis, regulating both the maintenance and differentiation of the nephrogenic mesenchyme. Interestingly, aberrant MAPK/ERK signaling is linked to many cancers, and recent studies suggest it also plays a role in the most common pediatric renal cancer, Wilms’ tumor.

Alzheimer’s disease (AD) is a progressive, degenerative brain disorder that impairs memory and thinking skills, leading to significant economic and humanistic burdens. It is associated with various neuropsychiatric symptoms (NPSs) such as anxiety, agitation, depression, aggression, apathy, and psychosis. NPSs are common in patients with AD, affecting up to 97% of individuals diagnosed with AD. The severity of NPS is linked to disease progression and cognitive decline. NPS in Alzheimer’s disease leads to increased morbidity, mortality, caregiver burden, earlier nursing home placement, and higher healthcare costs. Despite their significant impact, clinical research on NPS in AD is limited. In clinical settings, accurately distinguishing and diagnosing NPS related to AD remains a challenge. Additionally, conventional treatments for NPS in AD are often ineffective, highlighting the need for new therapies that target these specific symptoms. Understanding these comorbidities can aid in early diagnosis and better management of AD. In this review, we provide a summary of the various neurological and psychiatric symptoms (NPSs) associated with AD and new candidates under development for the treatment of NPSs based on their therapeutic targets and mechanisms. On top of the conventional NPSs studied far, this review adds recent advancements in the understanding of social functional impairment in AD. This review also provides information that can contribute to the advancement of studies and translational research in this field by emphasizing therapeutic targets and mechanism of action focused on AD-related NPS, rather than conventional mechanisms targeted in AD drug development. Above all, considering the relative lack of research in this new field despite the importance of clinical, medical, and translational research, it may increase interest in NPSs in AD, its pathophysiological mechanisms, and potential therapeutic candidates such as molecules with antioxidant potential.

Milled MgH2, NaAlH4, MgH2–10NaAlH4, MgH2–30NaAlH4, MgH2–50NaAlH4, and MgH2–2Ni-10NaAlH4 samples were prepared by milling in hydrogen atmosphere (reactive mechanical milling, RMM). Decomposition temperatures of milled MgH2, NaAlH4, MgH2–10NaAlH4, and MgH2–30NaAlH4 were examined in a Sieverts-type hydrogen-absorption and release apparatus, in which the hydrogen pressures were kept constant during hydrogen absorption or release. As the content of NaAlH4 in the sample increased, the temperature at the highest peak in the ratio of increase in Hr to increase in T, dHr/dT, versus T curve decreased. The higher content of NaAlH4 is believed to have made effects of reactive mechanical milling stronger. Effects of the NaAlH4 content on the temperatures of intermediate reactions were studied for MgH2 – NaAlH4 composites. Phase formation in the cycled MgH2–50NaAlH4 were investigated. The hydrogen-storage properties of MgH2–30NaAlH4 were compared with those of Mg-based alloys in which oxide, halides, or fluoride was added.

For the effective utilization of rice husk, organosolv fractionation was investigated to separate three main components (glucan, xylose, and lignin) with low acid concentration. Reaction temperatures of 170–190 °C, ethanol concentrations of 50–70% (v/v), and sulfuric acid concentrations of 0–0.7% (w/v) were investigated, with the reaction time and liquid-to-solid ratio kept constant at 60 min and 10, respectively. The fractionation conditions for the efficient separation into the three components of rice husk were determined to be 180 °C, 60% (v/v) of ethanol, and 0.25% (w/v) of sulfuric acid. Under these fractionation conditions, 86.8% of the xylan and 77.5% of the lignin were removed from the rice husk, and xylose and lignin were obtained from the liquid in 67.6% and 49.8% yields, respectively. The glucan digestibility of the fractionated rice husk was 85.2% with an enzyme loading of 15 FPU (filter paper unit) of cellulase per g-glucan.

In this study, a preload monitoring method using impedance signatures obtained from a piezoelectric-based smart interface is presented for bolted girder connections. Firstly, the background theory of the piezoelectric-based smart interface and its implementation into health monitoring of bolted connections are outlined. A simplified electro-mechanical (EM) impedance model of a smart interface-embedded bolted connection system is formulated to interpret mechanistic understanding of EM impedance signatures under the effect of bolt preload. Secondly, finite element modeling of a bolted connection is carried out to show the numerical feasibility of the presented method and to predetermine the sensitive frequency band of impedance signatures. Finally, impedance measurements are conducted on a lab-scaled bolted girder connection to verify the predetermined sensitive frequency range and to assess the bolt preload changes in the test structure.

In order to produce bioethanol from yellow poplar sawdust without detoxification, deacetylation (mild alkali treatment) was performed with aqueous ammonia solution. To select the optimal conditions, deacetylation process was carried out using different conditions: NH₄OH loading (2–10% (w/v)) and solid-to-liquid ratio (1:4–10) at 121 °C for 60 min. In order to assess the effectiveness of deacetylation, fractionation of deacetylated yellow poplar sawdust was performed using dilute acid (H₂SO₄, 0.5–2.0% (w/v)), reaction temperature (130–150 °C) and time (10–80 min). The toxicity-reduced hemicellulosic hydrolysates that were obtained through a two-step treatment at optimized conditions were fermented using Pichia stipitis for ethanol production, without any further detoxification. The maximum ethanol production was 4.84 g/L, corresponding to a theoretical ethanol yield of 82.52%, which is comparable to those of intentionally made hydrolyzates as controls.

We present an automated system for nutrient solution management. Prior arts usually measure only pH and EC of the nutrient solutions for maintenance. When EC drops, they just simply add concentrated nutrient to the horticulture bed. Such approach can maintain the density of nutrient solution but cannot maintain the rates of individual ion particles. To prevent nutrition related disorders, fertilization methods with ion selective electrodes are widely introduced. This trend measures individual ion concentration of nutrient solution to maintain appropriate nutrient composition by supplying only insufficient ions. Many researchers have suggested ISE based automated fertilization systems. However, they failed to control a chemical artifact called ion interference effect, which becomes greater at higher density. Our system measures individual concentration of multiple ions and add only deficient nutrients, while handling the ion interference effect issue. To ensure the performance of ion selective electrodes, the system also performs fully automated 3-point calibration 24 times a day. A machine learning algorithm is applied on the sensory parts to remove ion interference effect which make measurement of complex solution with ISE almost impossible. With automated calibration and signal processing technology, the system robustly and continuously maintains nutrient condition for plants. We suggest applying this system on closed hydroponic systems such as smart farms or plant factory, to reduce water consumption and to provide more appropriate environment for the crops.

Atopic dermatitis (AD) is a chronic and allergic skin disease, however, there is no cure for the disease. Many studies have shown anti-AD potentials of red ginseng, while red ginseng marc (RGM) remained after the ginseng extraction is discarded as industrial waste. However, it is recently reported that RGM, particularly fermented RGM (fRGM), still contains the bioactive properties. Thus, anti-allergic effects of fRGM were examined in 2,4-dinitrochlorobenzene-induced AD-like mice model. The model was topically treated with distilled water (control), dexamethasone, or fRGM for six weeks. The treatments of fRGM alleviated the skin lesions and reduced serum IgE levels, compared with the control. The fRGM also reduced skin levels of lipid peroxidation and superoxide anion, however, increased glutathione contents, with down-regulated gene expressions for inflammatory mediators. The histopathological analyses demonstrated that fRGM suppressed the epidermal thickening, collagen deposition, and inflammatory cell and mast cell infiltration, which involved the anti-inflammatory, anti-oxidant, and anti-apoptotic effects. Further, fRGM suppressed hypertrophic changes and inflammatory responses in the spleen and lymph node. The beneficial effects were observed in the dexamethasone and fRGM groups, however, the antioxidant effects were evident only in the fRGM treatments. These provide useful information for developing fRGM as therapeutic sources for AD.

Random copolymers made of both (PIM-polyimide) and (6FDA-durene-PI) were prepared for the first time by a facile one-step polycondensation reaction. By combining the highly porous and contorted structure of PIM (polymers with intrinsic microporosity) and high thermomechanical properties of PI (polyimide), the membranes obtained from these random copolymers [(PIM-PI)x-(6FDA-durene-PI)y] showed high CO₂ permeability (> 1047 Barrer) with moderate CO₂/N₂ (> 16.5) and CO₂/CH₄ (> 18) selectivity, together with excellent thermal and mechanical properties. The membranes prepared from three different compositions of two comonomers (1:4, 1:6 and 1:10 of x:y), all showed similar morphological and physical properties, and gas separation performance, indicating ease of synthesis and practicability for large-scale production. The gas separation performance of these membranes at various pressure ranges (100–1500 torr) was also investigated.

Visfatin, a member of the adipokine family, plays an important role in many metabolic and stress responses. The mechanisms underlying the direct therapeutic effects of visfatin on wound healing have not been reported yet. In this study, we examined the effects of visfatin on wound healing in vitro and in vivo. Visfatin enhanced the proliferation and migration of human dermal fibroblasts (HDFs) and keratinocytes, and significantly increased the expression of wound healing-related vascular endothelial growth factor (VEGF) in vitro and in vivo. Treatment of HDFs with visfatin induced activation of both extracellular signal-regulated kinases 1 and 2 (ERK1/2) and c-Jun N-terminal kinases 1 and 2 (JNK1/2) in a time-dependent manner. Inhibition of ERK1/2 and JNK1/2 led to a significant decrease in visfatin-induced proliferation and migration of HDFs. Importantly, blocking VEGF with its neutralizing antibodies suppressed the visfatin-induced proliferation and migration of HDFs and human keratinocytes, indicating that visfatin induces the proliferation and migration of HDFs and human keratinocytes via increased VEGF expression. Moreover, visfatin effectively improved wound repair in vivo, which was comparable to the wound healing activity of epidermal growth factor (EGF). Taken together, we demonstrate that visfatin promotes the proliferation and migration of HDFs and human keratinocytes by inducing VEGF expression and can be used as a potential novel therapeutic agent for wound healing.

Communication between devices has transitioned from wired to unwired. Wireless networks have been in use widely around the globe since the advent of smartphones, IoT devices and other technologies that are compatible with wireless mode of communication. At the same time security issues have also increased in such communication methods. The aim of this paper is to propose security and privacy issues of the wireless networks and present them through comprehensive surveys. In context of security issues, there are 2 typical DDoS attacks - HTTP flood and SYN flood. Other than DDoS attacks, there are several other threats to wireless networks. One of the most prevalent include security issues in Internet of Things. In terms of privacy issues in a wireless network, location-based applications, individual data, cellular network and V2G (Vehicle to Grid) network are surveyed. The survey is hosted using questionnaire and responses of 70 participants is recorded. It is observed from the survey results that many groups of people lack the knowledge of security and privacy of wireless technologies and networks despite their increased use, however, students are relatively more aware and have strong knowledge of those issues. It is concluded from the results that an effective solution to these problems can be hosting campaigns for spreading the security and privacy laws to help the groups of people who are lagging behind in this domain of knowledge become more aware. A unique solution is also presented to overcome the security issues which include implementation of detection and mitigation techniques, implementing Blockchain in the IoT devices and implementing fog computing solutions. The unique solutions to overcome the privacy issues are proposed in the form of a privacy approach from the LBS server between pairs of users to increase the implementation of DSPM and blockchain as a solution.

Background and Objectives: The arthroscopic biceps rerouting (BR) technique was introduced as a novel technique for large-to-massive rotator cuff tears (LMRCT). This method can restore shoulder stability, and its biomechanical effect was verified in a cadaver experiment. Recent reports have shown favourable clinical outcomes. This study aimed to compare the clinical outcomes of partial repair with those of BR technique in LMRCT. Materials and Methods: We included 72 patients who had undergone LMRCT. Arthroscopic partial repair was performed in 31 patients (group I), while repair with the BR technique was performed in 41 patients (group II). Functional and imaging outcomes were evaluated and compared using a visual analogue scale for pain, range of motion (ROM), American Shoulder and Elbow Surgeons (ASES) score, Constant score, and Korean Shoulder Score (KSS) before the surgery and at 3, 6, and 12 months after the surgery and at the last follow-up. Tendon integrity was investigated using magnetic resonance in all the patients at 12 months postoperative. Results: Mean follow-up period was 22.11 ± 10.47 months (range, 12–53 months). Forward flexion (P=0.02) and external rotation at the side (P=0.04) were significantly higher in group II than in group I on postoperative day (POD) 12. For internal rotation, group II showed significant improvement compared to group I on POD 3 (P=0.002) and at six months postoperative (P=0.01). On POD 12, the ASES (P=0.047) and KSS (P=0.048) were better in group II. Significant improvements in pain and clinical scores were observed in both groups at the last follow-up. However, there were no significant differences in pain, clinical scores, or ROM between the two groups at the last follow-up. Retear of the repaired tendon was observed in nine patients in group I (29.03%) and 8 in group II (19.51%, P = 0.35). Conclusions: Partial repair and repair using the BR technique effectively improved clinical and radiologic outcomes. The BR technique revealed early recovery of ROM and better clinical results than partial repair until one year postoperatively. This could be a useful method in LMRCT.

Inflammatory bowel diseases (IBD), including Crohn's disease and ulcerative colitis, is a disease of chronic inflammatory conditions of the intestinal tract due to disturbance of the inflammation and immune system. Symptoms of IBD include abdominal pain, diarrhea, bleeding, reduced weight, and fatigue. In IBD, the immune system attacks the intestinal tract's inner wall, causing chronic inflammation and tissue damage. In particular, IL-6 and IL-17 act on immune cells, including T cells and macrophages, to amplify the immune responses so that tissue damage and morphological changes occur. Of note, excessive calorie intake and obesity also affect the immune system due to inflammation caused by lipotoxicity and changes in lipids supply. Similarly, individuals with IBD have alterations in liver function after sustained high-fat diet feeding. In addition, excess dietary fat intake, along with alterations in primary and secondary bile acids in the colon, can affect the onset and progression of IBD because inflammatory cytokines contribute to insulin resistance; the factors include the release of inflammatory cytokines, oxidative stress, and changes in intestinal microflora, which may also contribute to the disease progression. However, interfering with de novo fatty acid synthase by deleting the enzyme acetyl-CoA-carboxylase 1 in intestinal epithelial cells leads to the deficiency of epithelial crypt structures and tissue regeneration, which seems to be due to Lgr5+ intestinal stem cell function. Thus, conflicting reports exist regarding high-fat diet effects on IBD animal models. This review will focus on the pathological basis of the link between dietary lipids intake and IBD and cover currently available pharmacological approaches.

Burrs form due to plastic deformation of materials during machining processes, such as milling and drilling. Deburring can be very difficult when the burrs are not easily accessible for removal. In this study, abrasive flow machining (AFM) was adopted for deburring the edges of milling specimens. Based on the experimental observations on AL6061 specimens, the deburring performance was characterized in terms of flow speed, the local curvature of the streamline near the burr edge, and shear stress. A new objective function that can predict the extent of deburring is proposed based on these characteristics and validated through experiments. Based on this new objective function, a prediction of deburring performance on the burr edge of the intersecting holes with offset was performed. The results between the predicted and experimental observation results were in reasonable agreement.

Recently many researches of EOS (Electric Arc Furnace Oxidizing Slag) on application to construction industry have been carried out with increasing its production and limited reclamation site. EOS can be used as a fine aggregate for construction material, however, its engineering properties vary with the manufacturing process and producing district, causing a quality differences in material performance. In the work, EOS is obtained from steel manufacturing plants in South Korea and the engineering properties are evaluated for EOS and the cement mortar with EOS, respectively. From the tests, EOS is mainly made up of CaO, SiO₂, and FeO with 18.2% of larnite which has a crystal structure of β-C₂S with similar cement mineral. EOS mortar shows an increasing compressive strength with more EOS content, which is affected by a considerable amount of larnite (β-C2S) in EOS. The EOS based mortar with ERS (Electric Arc Furnace Reduction Slag) shows unsatisfactory results over the criteria for rate of change, which implies that more consideration must be taken for the usage of the mixed ERS and EOS for cement mortar due to swelling effect of ERS on dimensional stability.

Toward the standardization of O. biennis sprout extract (OBS-E), we aimed to obtain indicator compounds, using a validated method. HPLC-UVD allowed simultaneous quantification of indicator compounds quercetin 3-glucuronide and ellagic acid. The method was validated in terms of specificity, linearity, precision, accuracy, and limit of detection/limit of quantification (LOD/LOQ). High specificity and linearity was demonstrated, with correlation coefficients of 1.0000 for quercetin 3-glucuronide and 0.9998 for ellagic acid. The LOD/LOQ values were 0.486/1.472 μg/mL for quercetin 3-glucuronide and 1.003/3.039 μg/mL for ellagic acid. Intra-day and inter-day variability tests produced relative standard deviation for each compound of &lt;2%, a generally accepted precision criterion. High recovery rate were also obtained, indicating accuracy validation. The OBS-E prepared using various concentrations of ethanol were then analyzed. The 50% ethanol extract had highest content of quercetin 3-glucuronide, whereas the 70% ethanol extract possessed the lowest. However, the ellagic acid content was highest in the 70% ethanol extract and lowest in the 90% ethanol extract. Thus, quercetin 3-glucuronide and ellagic acid can be used industrially as indicator compounds for O. biennis sprout products, and our validated method can be used to establish indicator compounds for other natural products.