Egyptians face a significant challenge in meeting the growing population's water needs for agriculture and food production. To address this, policymakers and researchers have implemented the National Great Project for Lining and Rehabilitation of All Open Canals of the Irrigation Network to reduce irrigation water losses through seepage, evaporation, and evapotranspiration. The current field study evaluates water losses from the Al Maanna canal network in Assiut governorate, Middle Egypt, using empirical formulas and field ponding methods. The obtained results indicated that the Moleth-Worth formula is more compatible and gives results that are in good agreement with the field measurements carried out. The estimated seepage losses from the existing, distorted Al Maanna canal network using the Moleth-Worth formula and field ponding method were about 2.07 and 2.20 million m3/month, respectively. Also, the calculated maximum evaporation and evapotranspiration losses were about 0.086 and 1.133 million m3/month, respectively. Consequently, the total water losses might be about 3.42 million m3/month, representing nearly 13.63% of the Al Maanna canal’s total discharge. After completing the lining process, seepage losses from lined canals were determined to be only about 0.472 million m3/month using the ponding method, while evaporation and evapotranspiration losses will be significantly decreased after canal rehabilitation. Hence, lining the Al Maanna canal network can decrease the total water losses by about 84%, which is sufficient to recommend and encourage the lining processes where the value of the gained quantities of water exceeds all the implementation expenses, in addition to other moral, cultural, and environmental gains.

Peer-to-peer (P2P) content distribution or file sharing system aims to facilitate the dissemination of large files over unreliable networks. Network coding is a new transmission technique that has captured the interest of researchers because of its ability to increase throughput and robustness of the network, and decrease the download time. In this survey paper, we extensively summarize, assess, compare, and classify the most recently used techniques to improve P2P content distribution systems performance using network coding. To the best of our knowledge, this survey is the first comprehensive survey that specifically focuses on the performance of network coding based P2P file sharing systems.

Road conditions, often degraded by insufficient maintenance or adverse weather, significantly contribute to accidents, exacerbated by the limited human reaction time to sudden hazards like potholes. Early detection of distant potholes is crucial for timely corrective actions, such as reducing speed or avoiding obstacles, to mitigate vehicle damage and accidents. This paper introduces a novel approach that utilizes perspective transformation to enhance pothole detection at different distances, focusing particularly on distant potholes. Perspective transformation improves the visibility and clarity of potholes by virtually bringing them closer and enlarging their features, which is particularly beneficial given the fixed-size input requirement of object detection networks, typically smaller than the raw image resolutions captured by cameras. Our method automatically identifies the region of interest (ROI)—the road area—and calculates the corner points to generate a perspective transformation matrix. This matrix is applied to all images and corresponding bounding box labels, enhancing the representation of potholes in the dataset. This approach significantly boosts detection performance when used with YOLOv5-small, achieving a 45.7\% improvement in average precision (AP) at IoU thresholds of 0.5 to 0.95 for a single class, and notable improvements of 30.3\%, 78.6\%, and 278\% for near, medium, and far pothole classes, respectively, after categorizing them based on their distance. This work is the first to employ perspective transformation specifically for enhancing the detection of distant potholes.

On average, one in ten patients die because of a diagnostic error and medical errors are the third largest cause of death in the word. While LLMs have been proposed to help doctors with diagnoses, no research results have been published on comparing the diagnostic ability of many popular LLMs on an openly accessible real-patient cohort. In thus study, we compare LLMs from Google, OpenAI, Meta, Mistral, Cohere and Anthropic using our previously published evaluation methodology and explore improving their accuracy with RAG.

The Arabian Desert is characterised by very low rainfall and high evaporation, yet on its northeastern edge in central Iraq are 210 springs along the Abu Jir lineament, which represents the western depositional margin of a foreland basin infilled by the floodplain sediments of the Tigris and Euphrates Rivers; there is little evidence of faulting. The springs discharge from gently east-dipping Paleocene-Eocene limestones, either where groundwater flowpaths intersect the ground surface or where groundwater flow is forced to the surface by confining aquitards. Calculated annual recharge to the aquifer system across the Arabian Desert plateau (130-500 million m3) is enough to sustain the Abu Jir springs provided groundwater extraction is not excessive. The hydrochemistry of the springs is determined by evaporation, rainfall composition (high SO4 concentrations are due to dissolution of wind-blown gypsum in the rainfall), and plant uptake of Ca and K (despite the sparse vegetation). Limestone dissolution has relatively little impact; many of the springs are undersaturated with respect to calcite and lack tufa/travertine deposits. The springs at Hit-Kubaysa contain tar and high levels of H2S that probably seeped upwards along subvertical faults from underlying oil reservoirs; the presence of hydrocarbons makes the water reducing and converts the dissolved SO4 to H2S.

This Paper delves into the critical role played by fossil fuel-based polymers in promoting United Nations Sustainable Development Goals (SDGs) in the face of challenges brought about by swift population growth, suburbanization, and mechanization. It sheds light on the environmental and energy security recompences of converting plastic waste into biofuels and other valuable energy resources through state-of-the-art processes such as thermochemical conversion and pyrolysis. Besides, the research investigates the utilization of polymers in solar energy, energy storage, and low carbon transportation, emphasizing the inevitability of a dual approach that combines advancements in bio-based polymers and recycling technologies. It highlights the significance of collaborative endeavors involving governments, industries, and communities to overcome the technical, economic, and regulatory complications in transitioning towards a sustainable and circular plastic economy. Eventually, it showcases the potential of fossil fuel-based polymers in fostering a sustainable energy landscape, conducive to decarbonization efforts, and endorsing environmental sustainability.

In December 2019, an animal human coronavirus transmission occurred in Wuhan, China. A state of global pandemic was shortly declared, among a very rapid contagious spread of the virus. The causative virus was identified as SARS CoV 2 virus and is genetically related to the previous SARS outbreak in 2003. The virus causes wide clinical spectrum from mild flu like symptoms to adult respiratory distress syndrome. Kidney involvement has been reported in several reports in patients with various degrees of severity of SARS CoV2 infection. As knowledge is evolving, the accurate incidence of AKI is not known. Many questions are yet to be answered as regards the effect of epidemiological variables and comorbidities on the occurrence of AKI. Some reports have observed the occurrence of hematuria and proteinuria in a percentage of infected patients. Moreover, chronic kidney disease has not been found in some reports to add to the adverse outcomes, an aspect that merits further exploration. Patients on regular hemodialysis may be vulnerable to contagion due to lower status of immunity and need for frequent attendance to healthcare facilities. Due to the previous factors, prevention and mitigation of SARS CoV2 virus in this vulnerable population constitutes a major challenge.

Event-based vision is an emerging field of computer vision that offers unique properties such as asynchronous visual output, high temporal resolutions, and dependence on brightness changes to generate data. These properties can enable robust high-temporal-resolution object detection and tracking when combined with frame-based vision. In this paper, we present a hybrid, high-temporal-resolution, object detection and tracking approach, that combines learned and classical methods using synchronized images and event data. Off-the-shelf frame-based object detectors are used for initial object detection and classification. Then, event masks, generated per each detection, are used to enable inter-frame tracking at varying temporal resolutions using the event data. Detections are associated across time using a simple low-cost association metric. Moreover, we collect and label a traffic dataset using the hybrid sensor DAVIS 240c. This dataset is utilized for quantitative evaluation using state-of-the-art detection and tracking metrics. We provide ground truth bounding boxes and object IDs for each vehicle annotation. Further, we generate high-temporal-resolution ground truth data to analyze the tracking performance at different temporal rates. Our approach shows promising results with minimal performance deterioration at higher temporal resolutions (48 – 384 Hz) when compared with the baseline frame-based performance at 24 Hz.

Prochlorococcus, a cyanobacteria genus of the smallest and most abundant oceanic phototrophs, encompasses ecotype strains adapted to high-light (HL) and low-light (LL) niches. To elucidate the adaptive evolution of this genus, we analyzed 40 Prochlorococcus marinus ORFeomes, including two cornerstone strains, MED4 and NATL1A. Employing deep learning with robust statistical methods, we detected new protein family distributions in the strains and identified key genes differentiating HL and LL strains. HL strains harbor genes (ABC-2 transporters) related to stress resistance, such as DNA repair and RNA processing, while LL strains exhibit unique chlorophyll adaptations (ion transport proteins, HEAT repeats). We report variable, depth-dependent endogenous viral elements in the 40 strains. We constructed the ORFeomes of MED4 and NATL1A covering 99 % of the annotated protein-coding sequences of the two species, totaling 3976 cloned, sequence-verified ORFs. These comparative genomics analyses, paired with MED4 and NATL1A ORFeomes, will facilitate future genotype-to-phenotype mappings and systems biology exploration of Prochlorococcus ecology.

In an attempt to improve the quality of the agricultural drain in Egypt for its reuse again in the irrigation, low cost solution such as sand filter along with/ without other filtration media have been used in this research, As a result of that, pilot plant of sand filter mixed with other filtration media was tested for its ability to improve the sand performance in removing the suspended solids and organic matters from agricultural drain water of the Belbeis drain (in Sharkia governorate in Egypt). Only sand compared with sand with sponge and sand with Liyan Nanfang activated carbon (L.N.A.C) have been tested to find the optimum mixing sand/ medium ratio &optimum infiltration rate. The work has been done on four runs. It was found that sand mixed with sponge gave the best removal efficiency compared to that of the sand only and the sand mixed with L.N.A.C. The results presented that the concentration of CODt, CODsol and TSS was reduced from 125, 47 and 162 mg/l to 44, 34 and 28 mg/l respectively at optimum infiltration rate of 2 m³/m²/d for sand mixed with sponge.

This study presents a novel technique utilizing high frequency vibration to shorten treatment time and preserve alveolar bone in challenging orthodontic cases treated with Invisalign® clear aligners. Four non-growing orthodontic patients (age range 14-47 years old) with Class II skeletal patterns (convex profiles with retrognathic mandibles) who sought correction of their crowded teeth and non-surgical correction of their convex profiles were included in this study. These patients were treated using Invisalign clear aligners together with high frequency vibration (HFV) devices (120 Hz) (VPro5™) that were used by all patients for five minutes per day during active orthodontic treatment. Vertical control and forward rotation of the mandible for each patient was achieved through pre-programming the Invisalign to produce posterior teeth intrusion. Successful forward rotation of the mandibles achieved in all patients led to improvement of their facial convex profiles (ANB improved 2.1 + 0.5 degrees; FMA improved 1.2 +1.1 degrees). Dental decompensation was achieved by lingual tipping of the lower incisors and palatal root torque of upper incisors. The use of HFV together with Invisalign facilitated achieving these results within a 12+6 month period. In addition, more bone labial to the lower incisors after their lingual movement was noted. In conclusion, the use of HFV concurrent with SmartTrack Invisalign aligners allowed complex tooth movement and forward projection without surgery in non-growing patients with skeletal Class II relationships. The clinical impact and implications of this case series is that the use of HFV facilitates complex orthodontic tooth movement including posterior teeth intrusion and incisor decompensation in addition to increased bone formation labial to lower incisors that may minimize future gum recession due to their labial inclination.

Photocatalytic processes offer promising solutions for environmental remediation and clean energy production, yet their efficiency under visible light remains a significant challenge. Here, we report a novel silver-graphene (Ag-G) modified TiO2 (Ag-G-TiO2) nanocomposite photocatalyst that demonstrates remarkably enhanced photocatalytic activity for both dye wastewater degradation and hydrogen production under visible and UV light irradiation. Through comprehensive characterization and performance analysis, we reveal that the Ag-G modification narrows the TiO2 bandgap from 3.12 eV to 1.79 eV, enabling efficient visible light absorption. The nanocomposite achieves a peak hydrogen production rate of 191 μmolesg-1h-1 in deionized water dye solution under visible light, significantly outperforming unmodified TiO2. Intriguingly, we observe an inverse relationship between dye degradation efficiency and hydrogen production rates in dye solutions with tap water versus deionized water, highlighting the critical role of water composition in photocatalytic processes. Our findings demonstrate sustained hydrogen production under visible light and rapid initial rates under UV irradiation, underscoring the versatility of Ag-G-TiO2 catalyst. This work not only advances our understanding of fundamental photocatalytic mechanisms but also presents a promising material for solar-driven environmental and energy applications, potentially contributing to the global transition towards sustainable technologies.

Deadlock is a real problem that can cause expensive, time-dependent hang-ups or failures in distributed computing systems. Some studies have been conducted with deadlock detection and resolution in generalized request computing models, most of these studies are based on the diffusing computation scheme, where forward and backward propagated probe and reply messages respectively are diffused between dependent processes. The replies carry the dependency information between processes for the initiator. Using this dependency information initiator can detect and resolve the deadlock cycle. It has been proven in the literature that a deadlock cycle length distribution is skewed with a large majority of cycles (90%) having length two. Based on this fact an improved algorithm is proposed for handling deadlock detection in distributed computing systems under the distributed request model where each process has several requests at a time. The improved algorithm depends mainly on message propagation and timeout policy. Probe and reply messages are propagated between the initiator and its successors only to detect deadlock cycles between them. Global timeout policy is used to detect potential deadlock cycles with large length distribution. The proposed algorithm can handle concurrent executions. Simulation experiments are performed to see the effectiveness of the improved algorithm. It is found that the improved algorithm compares favorably with other existing algorithms and it shows better results for several performance metrics especially in reducing deadlock latency and execution time.

Objective: To investigate commonalities and variations in the learning outcomes, curriculum content, assessment methods and competencies in undergraduate orthodontic curricula globally. Methods: This scoping review followed the updated methodological guidance proposed by the Joanna Briggs Institute and reported in accordance with the Preferred Reporting Items for Systematic reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR). A search on electronic databases PubMed, Scopus and Embase was conducted for the last 25 years. Google Scholar was used to identify eligible unpublished and grey literature. Results: The total number of reports identified was 231. After removal of 62 duplicates, 169 reports were included in the title and abstract screening. Finally, 17 studies were included in the review which included 13 cross-sectional surveys, three expert panel proceedings and one discussion paper. Marked variations were reported in undergraduate orthodontic curricula and competency assessments at the level of individual countries, regionally as well as globally. The challenges of imparting competency in orthodontic treatment during undergraduate dental education are also acknowledged. Conclusion: Lack of consistency in undergraduate orthodontic education is evidenced by several Delphi studies to develop consensus on orthodontic teaching in undergraduate programs. A common message emanating from the available studies on undergraduate orthodontic education seems to emphasize a focus on assessment and diagnosis of orthodontic treatment needs of patients and a basic understanding of contemporary treatment options to facilitate patient referral.

This article illustrates a comprehensive exploration of the multifaceted role of hydrocarbons in the field of material science, bridging the gap between theoretical understanding and practical applications, also providing acumens into future perceptions. Hydrocarbons, which consists of hydrogen and carbon atoms, play a critical role in numerous sectors due to their extensive presence in both natural and synthetic environments. The study categorizes hydrocarbons into diverse categories such as alkanes, alkenes, alkynes, and aromatic hydrocarbons, each owning unique features that influence their physical properties and applications. This inclusive review comprehends the fundamental aspects of hydrocarbons, their indispensable compounds and elements, and their substantial contributions to material science, including their utilization in coatings, composites, and polymers. Besides, the article investigates into case studies that demonstrate the theoretical advancements and practical applications of hydrocarbons, as well as their latent in addressing future energy and environmental encounters. By investigative the role of hydrocarbons in the expansion of innovative materials and their implications for sustainability and technological progress, the article accentuates the significance of hydrocarbons in evolving the field of material science and technology.

The aroused quest to reduce the delay at interconnect level is the main urge of this paper to come across a configuration of Carbon Nanotube (CNT) bundle namely squarely packed bundle of composite CNTs. The approach, demonstrated in this paper, adapts the composite bundle to adopt for high speed Very Large Scale Integration (VLSI) interconnect with technology sizing down. To reduce the delay of the proposed configuration of composite CNT bundle, the behavioral change of Resistance (R), Inductance (L) and Capacitance (C) has been observed with respect to both width of the bundle and diameter of the CNTs in the bundle. Consequently, the performance of the modified bundle configuration is compared with previously developed configuration namely squarely packed bundle of dimorphic MWCNTs in terms of propagation delay and crosstalk delay at local, semiglobal and global level interconnect. The proposed bundle configuration is ultimately enacted as better one for 32nmand 16nmtechnology node and suitable for 7nmas well.

Purpose: This study aimed to describe the molecular epidemiology and seasonality of human rhinovirus (HRV) in chronic obstructive pulmonary disease (COPD) and its association with COPD exacerbations in Abu Dhabi, the United Arab Emirates (UAE). Methods: Sputum specimens were collected for analysis from all COPD patients who visited a medical center from November 2021 to October 2022. The real-time quantitative polymerase chain reaction (qPCR) test was used to detect HRV. Results: Of the 78 COPD patients included in the study, 58 (74%) pa-tients presented with one or more exacerbation episodes. The incidence of COPD exacerbation peaked over the winter and substantially decreased during the summer. HRV positivity in pa-tients during exacerbation (E1) was 11/58 (19%) and 15/58 (26%) two weeks after the exacerbation episode (E2). There was no significant difference in the HRV load in these patients. No statistically significant difference was observed in the detection of HRV during exacerbation compared to patients with stable COPD. Conclusion: This is the first study to assess the association between HRV detection by qPCR and COPD exacerbations in the UAE. The high sensitivity of the detec-tion technology helped collect reliable epidemiologic data. Few studies have provided similar Middle East data. This study's pattern of COPD exacerbations and HRV detection parallels that of temperate countries. This information can help with future, more extensive surveillance of res-piratory viruses in the UAE and the Middle East and their association with COPD exacerbations.

Abstract: The main contribution of this paper is to introduce a new iterative training algorithm for restricted Boltzmann machines. The proposed learning path is inspired from online sequential extreme learning machine one of extreme learning machine variants which deals with time accumulated sequences of data with fixed or varied sizes. Recursive least squares rules are integrated for weights adaptation to avoid learning rate tuning and local minimum issues. The proposed approach is compared to one of the well known training algorithms for Boltzmann machines named “contrastive divergence”, in term of time, accuracy and algorithmic complexity under the same conditions. Results strongly encourage the new given rules during data reconstruction.

Biofilm-associated proteins (BAPs) are important in the development and resilience of biofilms, which are intricate populations of microbes protected by extracellular matrix. All members of the BAP family are known to possess common characteristics such as high molecular weight and a signal sequence for extracellular secretion. It has been shown that BAPs are directly linked to the pathogenicity of many bacteria. This mini review highlights several potential strategies to target BAPs for drug development.

Energy demand has exponentially increased with the increase in the world population and ur-banization. Renewable energy is clean, renewable, and environmentally friendly. Hydrogen production through Proton Exchange Membrane (PEM) electrolyzer is an efficient way to produce renewable energy. The efficiency and energy consumption of the PEM electrolyzer depends on the feed water quality. In this report, we study the effect of pH, TDS, and conductivity on hydrogen production as well as energy consumption during the process. pH values (3, 7, 9), TDS values (300ppm, 600ppm, 900ppm), and conductivity values (30mS/cm, 70mS/cm, 100mS/cm) were studied to understand and optimize the hydrogen production using PEM electrolyzer. The in-vestigations showed that hydrogen production is significantly affected by pH, total dissolved solids, and conductivity, and the best levels of each variable were identified by extensive testing. The findings show both the scientific significance of proton exchange electrolysis in meeting the growing energy demands of society as well as the importance of knowing the influence that di-verse conditions have on the creation of hydrogen. Our research, in general, contributes to the expanding body of scientific knowledge on the topic of the effective production of hydrogen and offers useful insights for the continuation of investigation in this field.

Description of a novel bovine antimicrobial peptide and its antimicrobial spectrum. RNA isolation and RT-PCR were done from various tissues. DCD peptide was synthesized, and antimicrobial activity was analyzed. Bovine dermcidin gene contains five exons intermittent by 4 introns. Bovine DCD-mRNA was 398 bp with ORF 336 bp. Bovine DCD was expressed in skin and blood. Analysis of the amino acid compositions revealed that cysteine was repeated 6 times indicating the presence of 3 disulfide bonds that play role in the peptide stability. Staphylococcus epidermidis, Streptococcus bovis, and Enterococcus faecalis were affected by Bovine DCD peptide. Highest antimicrobial effect was at 50 and 100 µg/ml. The effect on Escherichia coli and Candida albicans was slightly low. In all bacteria, Bovine DCD peptide activity did not affect by varying pH values, but in Staphylococcus aureus, the activity was affected greatly at pH 4.5 and 5.5. The optimum salt concentrations were 100 and 50 mM NaCl with all bacterial strains and E. coli, respectively. In case of C. albicans, the antimicrobial activity of Bovine DCD peptide decreased with increasing the pH value regardless the NaCl concentration. The pH 6.5 of the sweat buffer was the optimum for the Bovine DCD peptide activity.

This work can be considered as a first step of designing a future competitive data-driven approach for remaining useful life prediction of aircraft engines. The proposed approach is an ensemble of serially connected extreme learning machines. The results of prediction of the first networks are scaled and fed to the next networks as an additive features to the original inputs. This feature mapping allows increasing the correlation of training inputs with their targets by holding new prior knowledge about the probable behavior of the target function. The proposed approach is evaluated under remaining useful estimation using a set of “time-varying” data retrieved from the public dataset C-MAPSS (Commercial Modular Aero Propulsion System Simulation) provided by NASA. The prediction performances are compared to basic extreme learning machine and proved the effectiveness of the proposed methodology.

Refinery planning optimization is a challenging problem as regards handling the nonconvex bilinearity mainly due to pooling operations in processes such as crude oil distillation and product blending. This work investigates the performance of several representative piecewise-linear (or piecewise-affine) relaxation schemes (referred to as McCormick, bm, nf5, nf6t, and de (which is a new approach proposed based on eigenvector decomposition) that mainly give rise to mixed-integer optimization programs to convexify a bilinear term using predetermined univariate partitioning for instances of uniform and non-uniform partition sizes. Computational results show that applying these schemes give improved relaxation tightness than only applying convex and concave envelopes as estimators. Uniform partition sizes typically perform better in terms of relaxation solution quality and convergence behavior. It is also seen that there is a limit on the number of partitions that contributes to relaxation tightness, which does not necessarily correspond to a larger number of partitions, while a direct relation between relaxation size and tightness does not always hold for non-uniform partition sizes.

Particulate Organic Carbon (POC) plays a crucial role in the marine carbon cycle, influencing carbon flux and many important ocean biogeochemical processes in the Bay of Bengal. The purpose of this study was to examine the seasonal and annual variability of POC in the Bay of Bengal (BoB) region and its correlation with Sea Surface Temperature (SST) and Chlorophyll-a (Chlor_a). This study uses level-3 POC, Chlor_a, and SST data from the Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua satellite. The surface POC concentration in the Bay of Bengal declined at a rate of -1.30 mgm^-3y^-1 over a ten-year period (2003-12) and ranged from 86.48 mgm^-3 to 110.93 mgm^-3 with an average of (93.74±7.50 mgm^-3). Seasonally, the mean POC was highest (97.40 mgm^-3) during the post-monsoon (October-November) and lowest (79.36 mgm^-3) in the pre-monsoon (March-May). Seasons were observed to have statistically significant differences in POC concentration in the study area (F_(3,2155) = 6.298; p <0.05). A strong positive correlation between POC and Chlorophyll was observed whereas a week positive correlation between POC and SST was observed. POC was observed to be very prominent in post-monsoon (97.40 mgm^-3) and in northeast-monsoon (97.14 mgm^-3) and moderate to low in southwest (81.12 mgm^-3) and pre-monsoon (79.36 mgm^-3). The Bay of Bengal’s annual mean POC:Chlor_a ratio ranged from 97.56 mgm^-3 to 332.89 mgm^-3, indicating a significant impact of biological processes on POC composition. To see how POC fluctuation affects biogeochemical processes in the Bay of Bengal, deeper investigation is required.

Plaque psoriasis is a common, long-lasting illness that affects the immune system and causes significant negative impacts on a patient's physical health, well-being, and ability to work effectively. Deucravacitinib (DEU) is the first oral medication used in the treatment of plaque psoriasis, a chronic skin condition that causes red, scaly patches on the skin. DEU is a type of medication called an oral Janus kinase (JAK) inhibitor, which works by blocking specific enzymes that play a role in the inflammation and immune response associated with psoriasis. Therefore, a quick, easy, novel, reliable, sensitive, and straightforward Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) approach was used to analyse DEU in plasma samples. The LC-MS/MS method for the determination of DEU in human plasma was based on using trimethoprim as an internal standard (IS). The separation of DEU and IS was carried out via liquid-liquid extraction (LLE). The isolated substances were then subjected to the chromatographic system using the ACE-C18 column (4.6x100 mm, 5 µm). The mobile phase employed consisted of methanol and a solution of 2 mM ammonium formate (80:20 v/v, respectively). The flow rate used was set at 0.9 mL min-1. The creative strategy was performed by running an ABSCIEX API 4000 mass spectrometer with an electron spray ionization source in Multiple Reaction Monitoring (MRM) modes. The ion transitions m/z 426.3  358.2 was used for DEU quantitation, while the ion transitions m/z 291.1  261.1 was used for trimethoprim quantitation. The accuracy, precision, linearity, recovery, and selectivity of DEU were deemed acceptable when validated for a concentration range between 0.500 to 601.050 ng/mL, utilizing a weighting factor of 1/x2.

Sustainability is a characteristic manifested in the ability to maintain the necessary level of performance for construction companies when risk factors arise during the implementation of investment and construction projects. The risk factors that arise during the implementation of in-vestment and construction projects differ in nature, degree of influence, and other characteristics. Ignoring these factors and measures to manage them often leads to critical consequences in the form of disruptions in the timing of work. Risk is a combination of the probability and consequences of the occurrence of adverse events. The article considers the concept of risk as a potential possibility of occurrence of adverse situations and related consequences when exposed to these factors. Risk factors are characterized by surprise, discreteness of changes, the presence of threshold values, upon reaching which a transition to a different mode of operation is required. The article discusses the risk factors arising at the construction stage, their classification. A methodology has been developed that includes conducting a survey in the form of a questionnaire in order to collect information about risk factors that affect the implementation of investment and construction projects. Experts with experience in the construction sector were involved in the survey. The processing of the survey results made it possible to assess the significance of various risk factors in investment and construction projects. Thus, statistical and expert methods were used in the study. The results showed that financial, technical, legal, economic, managerial and natural factors have the greatest impact on investment and construction projects. It is recommended to pay special attention to the listed factors when developing measures aimed at preventing risks and their consequences. The methodology described in the study can be used by construction companies in strategic planning. The analysis of the stability of construction companies, depending on their use of various ways to counteract risk factors, allowed us to develop a number of practical recommendations to reduce the impact of the studied factors on achieving the goals of investment and construction projects.

Background: Studies have tried to identify predictors of functional markers of keratoconus progression, whereas structural outcomes of collagen cross-linking have not been properly investigated. Objective: find and set up a combination of diagnostic modalities and measurements to reliably reflect CXL efficiency. Material and methods: We retrospectively reviewed the medical histories of 107 KC patients (131 eyes) who underwent CXL in a medical center from January 2018 to December 2022. The dataset included preoperative examinations and follow-up results, which provided a total of 796 observations. The cases of other corneal diseases, repeated CXL, pregnancy, and observations without follow-up examinations were excluded. Results: The study findings revealed a significant drop in the central and corneal thickness during 14.01±9.98 months of observations. Linear and polynomial equations suggested different trends in pachymetry change after CXL. The linear model showed corneal thinning, and according to the polynomials, pachymetry findings return to baseline values two years after CXL. Conclusion: The most reliable prognosis of postoperative corneal thickness is achieved with the models trained on keratometry readings and topography indices. BAD indices are also reliable predictors of the corneal thickness after CXL. A combination of the aforementioned structural parameters and their derivatives can reliably predict CXL efficiency.

Day-ahead forecasting of electricity prices is important in deregulated electricity markets for all the stakeholders: energy wholesalers, traders, retailers, and consumers. Electricity price forecasting is an inherently difficult problem due to its special characteristic of dynamicity and non-stationarity. In this paper, we present a robust price forecasting mechanism that shows resilience towards aggregate demand response effect and provides highly accurate forecasted electricity prices to the stakeholders in a dynamic environment. We employ an ensemble prediction model in which a group of different algorithms participate in predicting the price for each hour of a day. We propose two different strategies, namely, Fixed Weight Method (FWM) and Varying Weight Method (VWM), for selecting each hour's expert algorithm from the set of participating algorithms. In addition, we utilize a carefully engineered set of features selected from a pool of features derived from information such as past electricity price data, weather data, and calendar data. The proposed ensemble model offers better results than both the Pattern Sequence-based Forecasting (PSF) method and our own previous work using Artificial Neural Networks (ANN) alone do on the datasets for New York, Australian, and Spanish electricity markets.

Mandibular critical size defect (CSD) due to pathological conditions, trauma, and congenital disease can not heal spontaneously and predominantly filled with fibrous tissue. Therefore, a Guided Bone Regeneration (GBR) combined with bone grafting can be performed. The researchers considered using Demineralized Dentin Material Membrane (DDMM) from bovine dentine as an alternative GBR. This study aimed to determine the amount of fibroblast and collagen density after DDMM and bone graft implantation on CSD. Thirty-six Rattus norvegicus rats were used as samples. Mandibular bone defect 5x5 mm was made, then filled with bone graft and covered with Bovine Pericardium Collagen Membrane (BPCM) in the control group and DDMM in the treatment group. Six samples were sacrificed on 7, 14, and 21 days post-surgical for histology examination. There were no significant differences in the amount of fibroblast and collagen density (p-value > 0,05). The amount of fibroblast is lower and the collagen density is higher in treatment group. DDMM has microporosity to prevent connective tissue ingrowth and dentine tubules to allow growth factors release. DDMM and bone graft implantation can reduce the amount of fibroblasts and increase collagen density of CSD which potentially being used as a CSD alternative treatment for bone regeneration.

A sustainable, scalable source of energy‐dense chemical fuel is urgently needed to ensure the security of our energy supply for future generations. Solar energy is the only renewable energy source of sufficient scale to replace fossil fuels and meet rising environmental demand. Hydrogen is expected to play a key role as an energy carrier in future energy systems of the world. As fossil fuel supplies become scarcer and environmental concerns increase, hydrogen is likely to become an increasingly important chemical energy carrier and eventually may become the principal chemical energy carrier. When most of the world’s energy sources become non-fossil based, hydrogen and electricity are expected to be the two dominant energy carriers for the provision of end-use services. Photocatalytic hydrogen evolution from water by solar energy over semiconductors offers a promising way for clean and renewable production of hydrogen. The TiO2-based materials have received considerable attention in recent years due to their extensive application in photocatalysis for hydrogen evolution. Though TiO2 is the most widely investigated photocatalyst for hydrogen evolution, it still provides low photocatalytic activity due to the wide bandgap that results in photocatalytic activity only under ultraviolet (UV) irradiation. Modification of TiO2 photocatalysts with several transition metals has been extensively studied to extend the absorbance capacity of TiO2 into the visible range. The effect of different photocatalytic deposition and reaction parameters also play major roles in enhancing the photostability of photoanode and increasing the hydrogen gas output, respectively.

This study develops a predictor-corrector algorithm for the numerical simulation of IVPs involving singular generalized fractional derivatives with Mittag-Leffler kernels. The proposed algorithm converts the considered IVP into a Volterra-type integral equation and then uses Trapezoidal rule to obtain approximate solutions. Numerical approximate solutions of some singular generalized fractional derivative with Mittag-Leffler kernels models have been presented to demonstrate the efficiency and accuracy of the proposed algorithm. The algorithm describes the influence of the fractional derivative parameters on the dynamics of the studied models. The suggested method is expected to be effectively employed in the field of simulating generalized fractional derivative models

Zinc finger proteins (ZFP) play important roles in cellular processes. The DNA binding region of ZFP consists of 3 zinc finger DNA binding domains connected by amino acid linkers, the sequence TGQKP connects ZF1 and ZF2, and TGEKP connects ZF2 with ZF3. Linkers act to tune the zinc finger protein in the right position to bind its DNA target, the type of amino acid residues and length of linkers reflect on ZF1-ZF2-ZF3 interactions and contribute to the search and recognition process of ZF protein to its DNA target. Linker mutations and the affinity of the resulting mutants to specific and nonspecific DNA targets were studied by MD simulations and MM_GB(PB)SA. The affinity of mutants to DNA varied with type and position of amino acid residue. Mutation of K in TGQKP resulted in loss in affinity due to the loss of positive K interaction with phosphates, mutation of G showed loss in affinity to DNA, WT protein and all linker mutants showed loss in affinity to a nonspecific DNA target, this finding confirms previous reports which interpreted this loss in affinity as due to ZF1 having an anchoring role, and ZF3 playing an explorer role in the binding mechanism. The change in ZFP-DNA affinity with linker mutations is discussed in view of protein structure and role of linker residues in binding.

In this paper, we present a new concept of the generalized core orthogonality (called the C-S orthogonality) for two generalized core invertible matrices $A$ and $B$. $A$ is said to be C-S orthogonal to $B$ if $A^{\tiny\textcircled{S}}B=0$ and $BA^{\tiny\textcircled{S}}=0$, where $A^{\tiny\textcircled{S}}$ is the generalized core inverse of $A$. The characterizations of C-S orthogonal matries and the C-S additivity are also provided. And the connection between the C-S orthogonality and C-S partial order has been given using their canonical form. Moreover, the concept of the strongly C-S orthogonality is defined and characterized.

(S)-Atenolol ((S)-2-(4-(2-Hydroxy-3-(isopropylamino)propoxy)phenyl)acetamide) has been synthesized in >99% ee with use of Candida antarctica lipase B from Syncozymes (Shanghai, China), in a kinetic resolution of the corresponding racemic chlorohydrin. Deprotonation of the starting phenol building block was base catalyzed. The enantiopurity of the chlorohydrin building block remained unchanged upon subsequent amination. All four steps in the synthesis protocol have been optimized compared to previously reported methods, which makes this new protocol more sustainable and in accordance with green chemistry principles compared to previously reported protocols.

Several medical graduates, avoid surgical specialties especially those with complex and delicate anatomy due to their doubt in their visual spatial abilities. Many patients are deemed inoperable, particularly in the field of pediatric cardiology, due to the complexity of the anatomy. On a similar note, stratification of risk of cardiac interventions, and decision making, is a room of significant person-based and center-based bias. Two inter-related technologies, namely immersive virtual reality (VR) and artificial intelligence have made impossible things possible and can help to standardize decision making strategies. This review aimed at reviewing the main anatomical and lesion-based scopes of these advancements in the field of cardiac care, with a special focus on pediatric cardiology.

Background : Our objectives were to investigate the incidence of elevated methemoglobin level among COVID-19 patients at intensive care unit. The correlation of methaemoglobinemia with mortality and some haematological parameters was also tested. Methods: The diagosis of coronavirus -19 infection was confirmed by RT-PCR. The quantitative method for determination of methemoglobin was it’s cyanide derivative by spectrophotometry. The reference range was less than 2 percent. Results: There were altogether 46 patients (11 male, 35 female) included. Their median age value was 70 y. ( 29 – 89). The methemoglobin median value was 4,3%. 15 of 46 patients died. The methemoglobin median value of departed patients was 8 % , and 2,5% was among survivors. ( P= 0,001) 19 patients were blood transfused. Their methemoglobin median was 11 % , otherwise the non transfused patients presented 2,7 % methemoglobin median. ( p= 0,001). We performed two binary logistic regression calculation, in order to judge the elevated methemoglobin level as an independent risk factor for the mortality. The predictor of methaemoglobin was 0,062 the constant -1,266 the odds ratio 1,06. The other binary logistic regression tested the fact of transfusion for the mortality. Predictor of transfusion 1,1474, constant -1,2527 odds ratio 3,15 There was no significant correlation between methemoglobin and CRP level. Discussion: The methemoglobin is not able to transport oxygen. It’s association with mortality is discussed by some papers.There are several hypothesis in the literature to explain it’s occurrence in COVID-19. The role of coronavirus proteins as oxydative agents was mentioned. The importance of enzyme defect is emphasized. The impact of reactive oxygen free radicals in inflammation is also probable. Some papers mentioned applying local anesthetics and azythromycin as a risk. The role of transfusion is obscure, because the methemoglobin can be elevated in blood conserves during storage. Conclusion: Testing the methemoglobin seems to be important, but the pathomechanism needs further research.. The traceability and standardization of different measurement methods at intensive care units is the key for defining it’s pathogenetic role.

Aim of the study: To draw inferences from a retrospective evaluation of PSMA PET CT scans performed for the evaluation of biochemical recurrence. Material and Methods: Retrospective analysis of 295 PSMA PET CT scans spanning 3 years between 2020 and 2022 was undertaken. Results: Of 295 PET CT scans, 179 were positive, 66 negative and 50 had indeterminate findings. In positive group, 67 had radical prostatectomy and PSMA avid lesions were seen most commonly in pelvic lymph nodes. Remaining 112 positive scans, in non-radical prostatectomy group; 25 had recurrence only in prostate, 17 had recurrence involving prostate bed; 28 had no recurrence in prostate gland, while 42 had recurrence in prostate as well as extra prostatic sites. Overall, in non-prostatectomy group, 75 % population was harbouring a PSMA avid lesion in prostate gland while in remaining 25% population recurrence did not involve prostate gland. Majority of indeterminate findings were seen in small pelvic or retroperitoneal lymph nodes or skeletal regions (ribs/others) and in 9 patients indeterminate focus was seen in the prostate bed only. Follow up PSMA PET CT was helpful in prior indeterminate findings and unexplained PSA rise. Conclusion: A higher recurrence in prostate bed while evaluating biochemical recurrence prompts us to think; whether prostatectomy should be offered more proactively? Follow up PSMA PET CT is helpful for indeterminate findings; a PSA rise of 0.7 ng/ml in 6 months can result in positive PSMA PET CT while negative scan can be seen upto 2ng/ml PSA rise in 6 months.

Despite the potential benefits of generative Artificial Intelligence (genAI), concerns about its psy-chological impact on medical students, especially with regard to job displacement, are apparent. This pilot study, conducted in Jordan during July–August 2024, aimed to examine the specific fears, anxieties, mistrust, and ethical concerns medical students could harbor towards genAI. Using a cross-sectional survey design, data were collected from 164 medical students studying in Jordan across various academic years, employing a structured self-administered questionnaire with an internally consistent FAME scale—representing Fear, Anxiety, Mistrust, and Ethics and comprising 12 items, with three items for each construct. The results indicated variable levels of anxiety towards genAI among the participating medical students: 34.1% reported no anxiety about genAI role in their future careers (n = 56), while 41.5% were slightly anxious (n = 61), 22.0% somewhat anxious (n = 36), and 2.4% extremely anxious (n = 4). Among the FAME constructs, Mistrust was the most agreed upon (mean: 12.35±2.78), followed by Ethics construct (mean: 10.86±2.90), Fear (mean: 9.49±3.53), and Anxiety (mean: 8.91±3.68). Sex, academic level, and Grade Point Average (GPA) did not significantly affect the students’ perceptions of genAI. However, there was a notable direct association between the students’ general anxiety about genAI and elevated scores in the Fear, Anxiety, and Ethics constructs of the FAME scale. Prior exposure to genAI and its previous use did not significantly modify the scores of the FAME scale. These findings highlighted the critical need for refined educational strategies to address the integration of genAI in medical training. The results demonstrated a pervasive anxiety, fear, mistrust, and ethical concerns among medical students regarding the deployment of genAI in healthcare, indicating the necessity for curriculum modifi-cations that focus specifically on these areas. Interventions should be tailored to increase genAI familiarity and competency, which would alleviate apprehension and equip future physicians to engage with this inevitable technology effectively. The study also highlighted the importance of incorporating ethical discussions into medical courses to address mistrust and concerns about the human-centered aspects of genAI. Conclusively, the study calls for a proactive evolution of medical education to prepare students for AI-driven healthcare practices shortly to ensure that physicians are well-prepared, confident, and ethically informed in their professional interactions with genAI technologies.

Inferring algorithmic structure in data is essential for discovering causal generative models. In this research, we present a quantum computing framework using the circuit model, for estimating algorithmic information metrics. The canonical computation model of the Turing machine is restricted in time and space resources, to make the target metrics computable under realistic assumptions. The universal prior distribution for the automata is obtained as a quantum superposition, which is further conditioned to estimate the metrics. Specific cases are explored where the quantum implementation offers polynomial advantage, in contrast to an indispensable exhaustive enumeration in the corresponding classical case. The unstructured output data and the computational irreducibility of Turing machines make this algorithm impossible to approximate using heuristics. Thus, exploring the space of program-output relations is one of the most promising problems for demonstrating quantum supremacy using Grover search that cannot be dequantized. Experimental use cases for quantum acceleration are developed for self-replicating programs and algorithmic complexity of short strings. With quantum computing hardware rapidly attaining technological maturity, we discuss how this framework will have significant advantage for various genomics applications in meta-biology, phylogenetic tree analysis, protein-protein interaction mapping and synthetic biology. This is the first time experimental algorithmic information theory is implemented using quantum computation. Our implementation on the Qiskit quantum programming platform is copy-left and can be found on https://github.com/Advanced-Research-Centre/QPULBA

In this article we explore the limiting behavior of the universal prior distribution obtained when applied over multiple meta-level hierarchy of programs and output data of a computational automata model. We were motivated to alleviate the effect of Solomonoff's assumption that all computable functions or hypotheses of the same length are equally likely, by weighing each program in turn by the algorithmic probability of their description number encoding. In the limiting case, the set of all possible program strings of a fixed-length converges to a distribution of self-replicating quines and quine-relays - having the structure of a constructor. We discuss how experimental algorithmic information theory provides insights towards understanding the fundamental metrics proposed in this work and reflect on the significance of these result in digital physics and the constructor theory of life.

This paper presents PrognosEase; a software that provides an easier way to produce different types of run-to-failure data mimicking real-world conditions to simplify prognosis studies in terms of data collection and improvement in ML degradation modelling process. Different types of degradation types made available to meet different types of applications. Besides, some primary ML tests were performed to ensure that complexity patterns of real systems could be observed in the training/testing predictions attitude. This paper also presents the impacts, limitations and potential improvements of the data generator.

Turmeric starch (TS) has gained significant attention due to its potential health benefits, this study intended to investigate the dose-dependent effects of TS on colonic fermentation in rats. Four experimental diets containing different levels of TS (5%, 10%, and 20% w/w) were formulated and fed to male Fischer 344 rats for two weeks and compared with rats fed 0% TS diet (TS0). The results showed that increasing doses of TS resulted in reduced body weight gain and lower visceral tissue weights compared to the TS0 group. These effects may be attributed to the high content of resistant starch in TS, which contributed to lower caloric intake. Colonic fermentation analysis revealed that higher doses of TS resulted in increased short chain fatty acids (SCFA) production, specifically increased cecal acetate content and decreased cecal pH dose-dependently. Notably, beneficial bacteria from the family Oscillospiraceae, genus Lachnospiraceae NK4A136 group, and Ruminococcus spp. were enriched in the TS-fed groups, further supporting its beneficial effects on gut microbiota and SCFA production. Furthermore, these results suggest that TS may have beneficial effects on colonic fermentation in rats.

A simple protocol for preparation of O-acylated enol form - (R/S)-ethyl-2-acetoxy-4-phenyl-4H-chromene-3-carboxylate 5 was presented. The compound was characterized by 1H-, 13C-and DEPT135 NMR spectra, including {1H,1H} COSY, {1H,13C} HSQC, {1H,13C} HMBC and 2D-NOESY spectra. The preferred regioselectivity for O-acylation of 3,4-dihydrocoumarin 5 in the presence of substituent in 4-th position in the chroman ring and accounting the steric hindrance of the ester group in 3-th place was confirmed.

Topological indices have been used to modeling biological and chemical properties of molecules in quantitive structure property relationship studies and quantitive structure activity studies. All the degree based topological indices have been defined via classical degree concept. In this paper we define a novel degree concept for a vertex of a simple connected graph: S degree. And also we define S indices of a simple connected graph by using the S degree concept. We compute the S indices for well-known simple connected graphs such as paths, stars, complete graphs and cycles.

We study L_2-approximation problems in the weighted Hilbert spaces in the worst case setting. Three interesting weighted Hilbert spaces appear in this paper, whose weights are equipped with two positive parameters $\ga_j$ and $\az_j$ for $j=1,\,2,\dots,\,d$. We consider the worst case error of algorithms that use finitely many arbitrary continuous linear functionals. We discuss the exponential convergence-(t,s)-weak tractability (EC-(t,s)-WT) of these L_2-approximation problems under the absolute or normalized error criterion. In particular, we obtain the sufficient and necessary conditions for EC-(1,1)-WT and EC-(t,1)-WT with t

This paper presents a comprehensive study on the design and aerodynamic optimization of a hybrid surveillance drone, conducted within the academic framework of Abu Dhabi University. The research primarily focuses on the comparison between flying wing and conventional aircraft layouts, with an emphasis on reducing drag coefficients and enhancing stall behavior through integrated design strategies. Utilizing SST k-omega viscous model (CFD) simulations, the study evaluates the aerodynamic performance of the drone model, analyzing lift, drag, and pitching moment coefficients against existing models. The paper further explores winglet selection and propeller dynamics, aiming to optimize the lift-to-drag ratio and achieve desired lift-to-weight ratios through careful consideration of propeller-wing interactions. Findings from the study indicate a notable improvement in aerodynamic efficiency, with the new drone model achieving a maximum lift coefficient (Cl, max) of 0.746, a minimum drag coefficient (Cd, min) of 0.039, and a peak lift-to-drag ratio (Cl/Cd) of 8.507. The research contributes significantly to the fields of Aerospace Engineering and Mechanical Engineering, providing a foundation for future advancements in drone design and application.

This paper explores the influence of GenAI chatbot (ChatGPT) and AI-based simulation (SimVenture) on the start-up intention through the mediating roles of entrepreneurship educational outcomes; entrepreneurship cognition, entrepreneurship competencies, and innovation spirit of students in higher education institutions in the Middle East. The proposed conceptual framework was empirically tested with partial least squares structural equation modeling using 166 survey responses from fourth-year undergraduate students enrolled in business administration programs in four higher education institutions in the Middle East region. The findings reveal that ChatGPT significantly promotes start-up intention, while ChatGPT has insignificant influence on entrepreneurship educational outcomes. Conversely, the SimVenture platform negatively influences start-up intention. Additionally, the SimVenture platform significantly improves entrepreneurship educational outcomes; thereby entrepreneurship educational outcomes directly influence start-up intention. Furthermore, the mediation paths show ChatGPT has an insignificant indirect influence on start-up intention through the mediating roles of entrepreneurship educational outcomes, while the SimVenture platform exhibits a notable indirect influence on startup intentions through improved entrepreneurship educational outcomes. These findings seek to provide insights for higher education institutions in the Middle East region in leveraging GenAI chatbot (ChatGPT) and AI-based simulation (SimVenture) to enhance entrepreneurial knowledge, awareness, competencies, and the spirit of innovation, which leads to promoting students’ intentions to start their businesses. Theoretically, the study contributes to filling the gap in the existing literature between AI tools and entrepreneurship education. This study is among the first to empirically explore the influences of GenAI chatbot (ChatGPT) and AI-based simulation (SimVenture) on entrepreneurship educational outcomes and the intention of students to embark on entrepreneurial ventures. It highlights the need for understanding AI technologies as distinct pedagogical tools.

The study employed simulation-based measurement approaches to evaluate and compare the performance of conventional networks to IRS-enhanced systems in terms of upstream spectral efficiency. The study discovered that applying IRS greatly improves coverage, or transmitting potency, for 6G services.

Ship detection from synthetic aperture radar (SAR) imagery is crucial for various fields in real-world applications. Numerous deep learning-based detectors have been investigated for SAR ship detection, which require a substantial amount of labeled data for training. However, SAR data annotation is time-consuming and demands specialized expertise, resulting in that deep learning-based SAR ship detectors struggle due to a lack of annotations. With limited labeled data, semi-supervised learning is a popular approach for boosting detection performance by excavating valuable information from unlabeled data. In this paper, a semi-supervised SAR ship detection network is proposed, termed as Multi-Teacher Dempster-Shafer Evidence Fusion Net-work (MTDSEFN). The MTDSEFN is an enhanced framework based on the basic teacher-student skeleton frame, comprising two branches: the Teacher Group (TG) and the Agency Teacher (AT). The TG utilizes multiple teachers to generate pseudo-labels for different augmentation versions of unlabeled samples, which are then refined to obtain high-quality pseudo-labels by using Dempster-Shafer (D-S) fusion. The AT not only serves to deliver weights of its own teacher to the TG at the end of each epoch, but also updates its own weights after each iteration, enabling the model to effectively learn rich information from unlabeled data. The combination of TG and AT guarantees both reliable pseudo-label generation and learning comprehensive diversity information from numerous unlabeled samples. Extensive experiments were performed on two public SAR ship datasets, and the results demonstrated the effectiveness and superiority of the proposed approach.

The rise of antibiotic-resistant bacteria in clinical settings has become a significant global concern. Among these bacteria, Acinetobacter baumannii stands out due to its remarkable ability to acquire resistance genes and persist in hospital environments, leading to some of the most challenging infections. Horizontal gene transfer (HGT) plays a crucial role in the evolution of this pathogen. The A. baumannii AMA205 strain, belonging to sequence type ST79, was isolated from a COVID-19 patient in Argentina in 2021. This strain’s antimicrobial resistance profile is notable as it harbors multiple resistance genes, some of which had not been previously described in this species. The AmpC family β-lactamase blaCMY-6, commonly found in Enterobacterales, had never been detected in A. baumannii before. Furthermore, this is the first ST79 strain known to carry the carbapenemase blaNDM-1 gene. Other acquired resistance genes include the carbapenemase blaOXA-23, further complicating treatment. Susceptibility testing revealed high resistance to most antibiotic families, including cefiderocol, with significant contributions from blaCMY-6 and blaNDM-1 genes to the cephalosporin and carbapenem resistance profiles. The A. baumannii AMA205 genome also contains genetic traits coding for 111 potential virulence factors, such as the iron-uptake system and biofilm-associated proteins. This study underscores A. baumannii's ability to acquire multiple resistance genes and highlights the need for alternative therapies and effective antimicrobial stewardship to control the spread of these highly resistant strains.

Brain plasticity is the ability of the brain to change and adapt in response to experience or learning. Its hallmarks are developmental flexibility, complex interactions of genetic and environmental influences, and structure-functional changes comprising neurogenesis, axonal sprouting, and synaptic remodeling. Herein, we review brain plasticity association with non-coding RNAs (ncRNAs). Studies on brain plasticity have important practical implications. Numerous cerebral ncRNAs are linked with neurological disorders, which makes them putative targets for RNA-based diagnostics and therapeutics since molecular characteristics of brain plastic change may reveal disease course and rehabilitative potential of the patient. A new insight into the concept of brain plasticity will provide perspectives on functional recovery following brain damage. The knowledge of this phenomenon will enable physicians to exploit cerebral plastic potential and regulate eloquent networks with timely interventions. Future studies will provide pathophysiologic mechanisms of brain plasticity at macro- and microscopic levels to advance rehabilitation strategies and improve the quality of life in neurological disorders.

The Sol Hamed (SH) area is a part of the Arabian-Nubian Shield (ANS) ophiolites occurred within Onib-Sol Hamed suture zone in the southern Eastern Desert of Egypt. The ophiolitic assemblages in this area are represented by serpentinite, metagabbro and arc assemblages represented by metavolcanics. They later intruded by gabbroes and granites. Geochemically, the compatible trace elements (Cr=2426–2709 ppm, Ni=1657–2377 ppm and Co=117–167 ppm) enrichment in SH serpentinites indicate derivation from a depleted mantle peridotite source. They show affinity to the typical metamorphic peridotites. The normative compositions reflect harzburgitic mantle source. Their Al2O3 contents (0.05–1.02 wt. %) are akin to oceanic and active margin peridotites and Pan-African serpentinites. The Cr and TiO2 contents indicate supra-subduction zone (SSZ) environment. Their Al2O3/SiO2 and MgO/SiO2 ratios support the SSZ affinity and are similar to ANS peridotites with fore-arc setting. Moreover, their Al2O3 and CaO depletion is typical of fore-arc peridotites. Structurally, the area represents four deformational events can be well-known in the Neoproterozoic rocks (D1, D2, D3 and D4); D1: E–W thrust faults and related E–W (F1) folds; D2: NW–SE thrust faults and related NW–SE (F2) folds were formed; D3: conjugate NNW-trending sinistral and NNE-trending dextral transpression, as well as N–trending tight folds (F3) and D4: is E–W dextral strike-slip and dip-slip normal faults striking NNW–SSE to N–S and E–W may be related to Red Sea rifting. There are major three fault sets affected the area. The first set trend mainly NE-SW and is manifested in the volcanic-sedimentary assemblage and Gabal SH and have important role in mineralization. The second set trend E-W affecting all the basement rocks and disturbs the first fault set. The third set trend N-S affected all the rock units. Magnesite mineralization in SH serpentinites is cryptocrystalline formed due to hydrothermal alteration of the serpentinite host rocks. It is occur as snow-white veins and stock-works. These characteristics are typical of Kraubath type magnesite deposits. Gold mineralization is confined to malachite-bearing quartz veins, smoky quartz veins and alteration zones. Malachite-bearing quartz veins trending NW-SE cut through gabbroic rocks and exhibit mylonitic structure. They are fractured containing malachite and disseminated sulfide minerals. Smoky quartz veins trending NE-SW with SE steeply dipping intrude the meta-andesite. They are intensively sheared containing iron oxides in the fissures. The gold grades increase with arsenopyrite occurrences. On the other hand, the barren quartz veins are nearly vertical with E-W directions. Alteration zones with NW-SE trend and nearly vertical dip intrude metagabbros and metavolcanics. Hematite, limonite, goethite and fresh pyrite characterize these zones. They occur mainly neighboring the auriferous quartz veins.

According to the World Health Organization (WHO), dementia is the seventh leading reason of death among all illnesses and one of the leading causes of disability among the world’s elderly people. Day by day the number of Alzheimer’s patients is raising. Considering the increasing rate and the dangers, Alzheimer’s disease should be diagnosed carefully. Machine learning is a potential technique for Alzheimer’s diagnosis but general users do not trust machine learning models due to the black-box nature. Even, some of those models do not provide the best performance because of using only neuroimaging data. To solve these issues, this paper proposes a novel explainable Alzheimer’s disease prediction model using a multimodal dataset. This approach performs a data-level fusion using clinical data, Freesurfer MRI segmentation data, and psychological data. For Alzheimer’s disease vs cognitively normal prediction, the random forest classifier provides 100% accuracy. Furthermore, Alzheimer’s disease and non-Alzheimer’s dementia should be classified properly because their symptoms are similar. To the best of our knowledge, we are the first to present a three-class classification on Alzheimer’s disease vs cognitively normal vs non-Alzheimer’s dementia and achieved 99.86% accuracy using an ensemble model. Besides, a novel Alzheimer’s patient management architecture is also proposed in this work..

Despite well-documented health benefits of probiotics Saccharomyces, its application in oral health has not been comprehensively assessed. Dental caries is a transmissible disease initiated by acid production of cariogenic bacteria and yeast, such as Streptococcus mutans and Candida albicans, on tooth enamel and followed by subsequent enamel demineralization. Here, we investigated the effect of two Saccharomyces strains (Saccharomyces boulardii, Saccharomyces cerevisiae) on S. mutans-C. albicans cross-kingdom interactions using a cariogenic planktonic model. Viable cells, pH changes and gene expression were measured. S. cerevisiae and S. boulardii inhibited the growth of C. albicans either in dual-, or multi-species conditions. Saccharomyces also inhibited C. albicans hyphal formation. Furthermore, Saccharomyces reduced the acidity of the culture medium which usually plummeted below pH 5 when S. mutans and C. albicans were present in the model. The presence of Saccharomyces maintained the culture medium above 6 even after overnight incubation, demonstrating a protective potential against dental enamel demineralization. S. boulardii significantly downregulated S. mutans atpD and eno genes expression. Overall, our results shed light on a new promising candidate, Saccharomyces, for dental caries prevention due to its potential to create a less cariogenic environment marked by a neutral pH and reduced growth of C. albicans.

Prime numbers are the atoms of mathematics and mathematics is needed to make sense of the real world. Finding the Prime number structure and eventually being able to crack their code is the ultimate goal in what is called Number Theory. From the evolution of species to cryptography, Nature finds help in Prime numbers. One of the most important advances in the study of Prime numbers was the paper by Bernhard Riemann in November 1859 called “Ueber die Anzahl der Primzahlen unter einer gegebenen Grösse” (On the number of primes less than a given quantity). In that paper, Riemann gave a formula for the number of primes less than x in terms the integral of 1/log(x) and the roots (zeros) of the zeta function defined by: Where ζ(z) is a function of a complex variable z that analytically continues the Dirichlet series. Riemann also formulated a conjecture about the location of the zeros of RZF, which fall into two classes: the "trivial zeros" -2, -4, -6, etc., and those whose real part lies between 0 and 1. Riemann's conjecture Riemann hypothesis [RH] was formulated as this: [RH] The real part of every nontrivial zero z* of the RZF is 1/2. Proving the RH is, as of today, one of the most important problems in mathematics. In this paper we will provide a proof of the RH. The proof of the RH will be built following these five parts: PART 1: Description of the RZF PART 2: The C-transformation PART 3: Application of the C-transformation to in Re(z) 0 to obtain ζ(z)=X(z)-Y(z) PART 4: Analysis of the values of z such that X(z)=Y(z), and |X(z)|=|Y(z)|, that equates to ζ(z)=0 Proof that |X(z)|=|Y(z)| only if Re(z)=1/2 Conclude that ζ(z)=0 only if Re(z)=1/2 for Re(z) 0 PART 5: We will also prove that all non-trivial zeros of ζ(z) in the critical line of the form are not distributed randomly. There is a relationship between the values of those zeros and the Harmonic function that leads to an algebraic relationship between any two zeros.

When the minimal length approach emerging from noncommutative Heisenberg algebra, generalized uncertainty principle (GUP), and thereby integrating gravitational fields to this fundamental theory of quantum mechanics (QM) is thoughtfully extended to Einstein field equations, the possible deformation of the metric tensor could be suggested. This is a complementary term combining the effects of QM and general relativity (GR) and comprising noncommutative algebra together with maximal spacelike four–acceleration. This deformation compiles with GR as curvature in relativistic eight–dimensional spacetime tangent bundle, generalization of Riemannian spacetime, is the recipe applied to derive the deformed metric tensor. This dictates how the affine connection on Riemannian manifold is straightforwardly deformed. We have discussed the symmetric property of deformed metric tensor and affine connection. Also, we have evaluated the dependence of a parallel transported tangent vector on the spacelike four–acceleration given in units of L, where L = rℏcG3 is a universal constant, c is speed of light, and ℏ is Planck constant, and G is Newton’s gravitational constant.

Gout is the most common form of inflammatory arthritis. Hyperuricaemia is the pre-requisite for gout and is influenced by variable modifiable and non-modifiable risk factors. Clinical features unique for gout are due to deposition of monosodium urate (MSU) crystal in articular and extra articular tissues. Among various treating agents, anti-inflammatory drugs and urate lowering therapies (ULT) are used widely and successfully, however, non-medicinal means are also effective in the disorder. In their updated guidelines, ACR (2012) and EULAR (2016) recommended both medicinal and non-medicinal approaches that could be used in treating gout, though some of the recommendations are based on lower level of evidence. Moreover, researchers’ continued effort in finding new gout managing agents appear promising, for example, role of Lesinurad in gout management (CLEAR1, CLEAR2). In this new synthesis the author is aimed to provide updated information on gout management based on a systematic review including published work within last ten years between 2008 and 2018 and for this purpose, using ‘clinical trials in gout management’ string, published worked searched in PubMed database from 1st September 2018 to 30 October 2018. Besides the recent ACR and EULAR evidence based management guidelines, the author reviewed another 91 (total 93) articles to make this new draft – 39 articles describe role of pharmacological agents and 54 describe different gout risks, pharmacokinetics/pharmacodynamics of ULT, association between raised sUA level and renal impairment, efficacy of non-pharmacological agents in reducing sUA. According to published work, anti-inflammatory agent is the most appropriate drug group in mitigating inflammatory symptoms of gout, though they often adversely affect over other vital 2 organs with impaired function. Besides ULT, uricase analogues are also found useful in non refractory gout. Since anti-inflammatory agents and ULT contraindicate in some clinical conditions, intra-articular steroid and or adrenocorticotropic hormone (ACTH) are appropriate alternatives instead. However, head-to-head comparison between different NSAIDs, NSAID and prednisolone, NSAID and colchicine are yet to perform. Use of combined anti-inflammatory preparations in gout is also based on lower level of evidence. Regarding effective maximum dose and long-standing impact of ULT on vital organs we are yet to reach a conclusion. Likewise, non-medicinal approaches are widely using in achieving target sUA level, though some of them are based on biased study outcomes and or study with inadequate power, requiring further analysis. Among non-pharmacological approaches, life-style modification, restriction of purine rich diets, avoidance of gout inciting agents are important, but inconclusive. Educating patients’ about diseases, risk factors, available treatment options and side effects from them are also important in terms of achieving sUA level, nevertheless too much counseling sometimes could be worthless.

This work is aiming to motivation on the prospect of evolving new thiazole dyes with respectable application properties, expected pharmacological activities. Curcumin Coupling with diverse diazonium salts of 2-amino thiazole derivatives as 2-aminobenzothiazole, 2- amino-5-phenylthiazole, 2 amino-5-methylthiazole and 2 amino-5-nitrothiazole to produce novel azo dyes. All synthesised dyes were completely confirmed their structures via elemental and spectroscopic techniques. The synthesised thiazole derivatives were examined for their “antimicrobial, anticancer and antioxidant” activities. All of the synthesized dyes were applied on synthetic fabrics as polyester and successively their dyeing properties, “light, washing, perspiration, rubbing and sublimation” fastness were evaluated. Prepared dyestuffs are suitable for dyeing polyester fabrics. It was initiate that all of prepared dyes own extraordinary colour hue, along with respectable fastness properties. Also the synthesised thiazole derivatives display moral pharmacology activity.

The urgent need to improve performance in the construction industry has led to the adoption of many innovative technologies. 3D laser scanners are amongst the leading technologies being used to capture and process assets or construction project data for use in various applications. Due to its nascent nature, many questions are still unanswered about 3D laser scanning, which in turn contribute to the slow adaptation of the technology. Some of these include the role of 3D laser scanners in capturing and processing raw construction project data. How accurate is the 3D laser scanner or point cloud data? How does laser scanning fit with other wider emerging technologies such as Building Information Modelling (BIM)? This study adopts a proof-of-concept approach, which in addition to answering the afore-mentioned questions, illustrates the application of the technology in practice. The study finds that the quality of the data, commonly referred to as point cloud data is still a major issue as it depends on the distance between the target object and 3D laser scanner’s station. Additionally, the quality of the data is still very dependent on data file sizes and the computational power of the processing machine. Lastly, the connection between laser scanning and BIM approaches is still weak as what can be done with a point cloud data model in a BIM environment is still very limited. The aforementioned findings reinforce existing views on the use of 3D laser scanners in capturing and processing construction project data.

We examine here the conductance changes associated with the change in spin state in a variety of different structures, using the example of the spin crossover complex [Fe(H2B(pz)2)2(bipy)] (pz= (pyrazol-1-yl)-borate and bipy = 2,2’-bipyridine) and [Fe(Htrz)2(trz)](BF4)] (Htrz = 1H-1,2,4-triazole) thin films . This conductance change is highly variable depending on the mechanism driving the change in spin state, the substrate and the device geometry. Simply stated, the choice of spin crossover complex used to build a device is not the only factor in determining the change in conductance with the change in spin state.

The ability to predict the likelihood of a live birth after single fresh embryo transfer is important for treatment planning and managing patient expectation, particularly in their first in vitro fertilization (IVF) cycle. Cryopreservation of supernumerary embryos is often regarded as an important prognostic variable and a surrogate marker of success for several reasons. While previous large studies have examined the association between the number of oocytes retrieved and cleavage-stage embryos available, and the odds of a live birth following a fresh embryo transfer, the relationship between the number of supernumerary blastocysts cryopreserved following a fresh embryo transfer has not been rigorously studied. We performed a retrospective analysis of data collected between 2006 and 2018 for all first time IVF patients with a fresh autologous day 5 single blastocyst transfer. The relationship between the likelihood of a live birth and number of supernumerary blastocysts cryopreserved was assessed according to patient age group. In patients aged <35 years and 35-39 years old, the likelihood of a live birth increased linearly from 0.33 (95%CI:0.31–0.34) to 0.80 (95%CI:0.74–0.86; P<.0001) and 0.30 (95%CI:0.28–0.32) to 0.82 (95%CI:0.73–0.91;P<.0001) between 1-6 blastocysts cryopreserved and then non-linearly to 0.95 (95% CI 0.92–0.97; P<.0001) and 0.96 (95%CI:0.93–0.99; P<.0001) if 10 or more blastocysts were cryopreserved, respectively. When aged 40 years and above, the likelihood of a live birth increased linearly from 0.26 (95%CI:0.19–0.32) to 0.83 (95%CI:0.68–0.97; P<.0001) between 1-4 blastocysts cryopreserved and then non-linearly to 0.99 (95%CI:0.98–0.99; P<.0001) if 10 or more blastocysts were cryopreserved. The present study demonstrated a non-linear relationship between the number of supernumerary blastocysts cryopreserved and the likelihood of a live birth after single blastocyst transfer in the first autologous fresh IVF/ICSI cycle across different age groups.

This paper explores Ghana's two-decade journey in developing a digital land information system (LIS), exemplified by Ghana Enterprise Land Information System (GELIS) and Enterprise Land Information System (ELIS). Despite advancements by Ghana’s Lands Commission, manual processes persist and coexist with digital ones. Our study uses a qualitative approach to assess the effectiveness of the LIS implemented in Accra. The study found that Accra’s LIS is highly aligned with clear institutional mandates, roles, and responsibilities as well as the availability of laws and policies to support analogue to digital conversion. Furthermore, a robust approach for protecting data, operating system and software underpins the system. Subsequently, the integration of a digital LIS has enhanced service delivery and accountability. Nonetheless, Accra’s LIS is still at the beginning of a comprehensive learning and development curve. To sustain the LIS requires furtherance in the implementation plan, funding, law implementation, ICT strategy, divisional integration, work processes, data quality, and communication strategy. These findings will inform the next steps of improvement for Accra's LIS and guide its nationwide scaling, contributing to discussions on technology acceptance dynamics in predominantly analogue environments.

Diastolic dysfunction, a prevalent condition characterized by impaired relaxation and filling of the left ventricle, significantly contributes to heart failure with preserved ejection fraction (HFpEF). Galectin-3, a β-galactoside-binding lectin, has garnered attention as a potential biomarker and mediator of fibrosis and inflammation in cardiovascular diseases. This comprehensive review investigates the impact of galectin-3 on diastolic dysfunction. We explore its molecular mechanisms, including its involvement in cellular signaling pathways and interaction with components of the extracellular matrix. Evidence from both animal models and clinical studies elucidates galectin-3's role in cardiac remodeling, inflammation, and fibrosis, shedding light on the underlying pathophysiology of diastolic dysfunction. Additionally, we examine the diagnostic and therapeutic implications of galectin-3 in diastolic dysfunction, emphasizing its potential as both a biomarker and a therapeutic target. This review underscores the significance of comprehending galectin-3's role in diastolic dysfunction and its promise in enhancing diagnosis and treatment approaches for HFpEF patients.

Probiotics are living microbes that provide benefits to the host. The increasing data on health promotion following probiotics administration triggered growing interest among researchers and pharmaceutical companies looking for novel therapeutic or preventive tools. Infections of the lower genital tract in females are caused by a wide range of pathogens, they are widespread, and represent one of the main areas for the use of probiotics and postbiotics. Vulvovaginal candidiasis (VVC) affects 75% of women in their reproductive age at least once during their lifetime. Of these women 5-8% develop the recurrent form (RVVC). The disease onset is triggered by the overgrowth of Candida species on the vaginal mucosa. Here, we evaluated the beneficial properties of the Bacillus coagulans spore-producing LMG S-24828 against C. albicans and C. parapsilosis. Our results show that both alive B. coagulans and its Cell-Free-Supernatant (CFS) exerted antifungal activity against both fungi. Moreover, alive B. coagulans reduced hyphal formation, inhibited C. albicans adhesion to vaginal epithelial cells and showed co-aggregation capacity. Overall, B. coagulans LMG S-24828 exerted a protective effect on vaginal epithelial cells infected with C. albicans. These data suggest that B. coagulans LMG S-24828 may provide benefits in the context of Candida vaginal infections.

This paper introduces the complex Rayleigh-van der Pol-Duffing oscillators (RVDOs), which are hyperchaotic and can be either autonomous or non-autonomous. The fundamental dynamics of the autonomous and nonautonomous complex RVDOs including dissipation, symmetry, fixed points and their stability are studied. These oscillators are found in various important fields of physics and engineering. The paper proposes a scheme to achieve phase synchronization (PS) and antiphase synchronization (APS) for different dimensional models. These kinds of synchronization are considered as generalization of several other types of synchronization. For this scheme we use the active control method based on Lyapunov stability theory. By analytically determining the control functions, the scheme achieved PS and APS. Our scheme is applied to study PS of hyperchaotic behaviours for two distinct hyperchaotic non-autonomous and autonomous complex RVDOs. Additionally, the scheme is employed to achieve APS of chaotic real non-autonomous RVDO and hyperchaotic complex autonomous RVDO, including those with different dimensions. Our work presents numerical results that plot the amplitudes and phases of these hyperchaotic behaviours, demonstrating the successful achievement of PS and APS.

Euler’s product formula over the primes and Euler’s zeta function equate to enshrine the Fundamental Theorem of Arithmetic that every integer > 1 is the product of a unique set of primes. The product formula has no zero, and with a domain ≤1 Euler’s zeta diverges. Dirichlet’s eta function η(s), negates alternate terms of zeta, permitting convergence when s∈C and Re(s) < 1, and its non-trivial zeros {ρ}, have a deep relationship with the distribution of the primes. The Riemann Hypothesis is that all the non-trivial zeros have Re(ρ) = 1/2. This work examines the symmetries in a partial Euler’s zeta series with a complex domain equating it to the difference between two finite vector series whose matched terms have mirror-image arguments, but whose magnitudes differ when Re(s) ≠ 1/2. Analytical continuation generates a modified eta series η_l(s), in which every l^th term is multiplied by (1-l). If the integer l is appropriately determined by the Im(s), similar paired finite vector series have a difference that closely follows η_l (s) and their terminal vectors intersect in a unique way permitting zeros only when Re(s) = 1/2. Furthermore, those vectors tracking the derivatives of the series, have a special relationship permitting zeros of the differential only when Re(s) > 1/2.

Wireless sensor networks (WSNs) are a critical research area with numerous practical applications. WSNs are utilized in real-life scenarios, including environmental monitoring, healthcare, industrial automation, smart homes, and agriculture. As WSNs advance and become more sophisticated, they offer limitless opportunities for innovative solutions in various fields. However, due to their unattended nature, it is essential to develop strategies to improve their performance without draining the battery power of the sensor nodes, which is their most valuable resource. This paper proposes a novel sink mobility model based on constructing a bipartite graph from a deployed wireless sensor network. Using the bipartite graph’s properties, the mobile sink node can visit stationary sensor nodes in an optimal way to collect data and transmit it to the base station. We evaluated the proposed approach through simulations using the NS-2 simulator to investigate the performance of wireless sensor networks when adopting this mobility model. Our results show that using the proposed approach can significantly enhance the performance of wireless sensor networks while conserving the energy of the sensor nodes.

Failure to meet the deadlines for the implementation of investment and construction projects is a problem in all countries of the world, and leads to unstable activity of construction companies. The article studies the most important destabilizing factors affecting the main indicator of sustainable activity of construction companies-the duration of the implementation of an investment and construction projects. To determine and assess the impact of destabilizing factors on the duration of implementation of selected investment and construction projects, a survey was conducted, in which a number of customers, consultants and contractors involved in construction projects took part. Questionnaires developed on the basis of a cluster sample were sent to respondents, 48 responses were received in response to the assessment of destabilizing factors. To analyze the received and grouped information, structural equation modeling using the Smart-PLS program was used. As a result of modeling, a number of results were obtained, the most important of which are the identification of the main reasons that lead to an average (20% - 50%) increase in the duration of projects in the construction sector. The most significant were: the lack of an appropriate procurement program for materials; inefficient scheduling by contractors and instability of construction production; poor-quality processing of incoming information and untimely deci-sion-making due to changes in projects during their implementation. Destabilizing factors con-tribute to an increase in the duration of construction sector projects, which leads to time overruns, cost overruns, and an increase in the negative impact on the overall use of resources. As a result of the study, a set of recommendations was formed, the most important of which is the use of possible compensatory measures that can allow construction companies to eliminate the risks of disrupting construction deadlines for sustainable activities. These compensatory measures include: - recommendations to customers of the construction project; - recommendations to contractors; - recommendations to the consultant. Moreover, the control of destabilizing factors that can cause delays, the improvement of contracts and the precise and clearer definition of all elements of the project can help to reduce the duration of construction, and will allow companies to maintain sustainable activities in the construction industry.

Wear phenomena on natural stone of the cultural heritage are induced from various sources. Consequently, the development of multifunctional protective materials which combine two or more useful properties is an effective strategy to address the synergistic effects of various wear mechanisms. A multifunctional coating, consisting of a silane-based precursor and zinc oxide (ZnO) nanoparticles (NPs), is produced and tested for the protection of limestone. The hybrid coating combines the following three properties: superhydrophobicity, including water-repellency, photocatalytic self-cleaning and biocidal activity. The relative concentration of the NPs (0.8% w/w), used for the suggested composite coating, is carefully selected according to wetting studies, colourimetric measurements and durability (tape peeling) tests. The non-wetting state is evidenced on the surface of the composite coating by the large contact angle of water drops (≈153°) and the small contact angle hysteresis (≈5°) which gives rise to the physical self-cleaning scenario (lotus effect). The photocatalytic chemical self-cleaning is shown with the removal of methylene blue, induced by the UV-A radiation. Moreover, it is shown that the suggested coating hinders the incubation of E. coli and S. aureus as the inhibition were 94.8 and 99.9 %, respectively. Finally, preliminary studies revealed the chemical stability of the suggested coating.

Products derived from Cannabis sativa have gained increased interest and popularity. As these products become common amongst the public, the heath and potential therapeutic values associated with hemp have become a premier focus of research. While the psychoactive and medicinal properties of Cannabis products have been extensively highlighted in literature, the antibacterial properties of CBD have not been explored in depth. This research serves to examine the antibacterial potential of CBD against Salmonella newington and Salmonella typhimurium. In this study we observed bacterial response to CBD exposure through biological assays, bacterial kinetics, and fluorescence microscopy. Additionally, comparative studies between CBD and ampicillin were conducted against Salmonella typhimurium and Salmonella newington to determine comparative efficacy. Furthermore, we observed potential resistance development of our Salmonella spp. against CBD treatment.

The goal of the investigation is to increase coverage, which is ensure better transmission around IoT services using IRS within a two-tier 6G system comprising of one micro cell tier running beneath a macro cellular tier. As a result, the study tested and compared the reliability of traditional connectivity with IRS-enhanced connectivity in terms of upstream end-to-end latency using computer-based measuring methods. The study concluded that the implementation of IRS greatly improves coverage, which means transmission effectiveness, for 6G services.

This study aims to explore significant present and future trends in accounting and corporate sustainability by examining publications from the Web of Science database spanning from 2010 to 2023. With a particular focus on research related to the digital business environment, the study employs bibliometric analysis grounded in the resource-based view theory to investigate the evolution of auditing and digital accounting research. Utilizing the VOSviewer tool, the study analyzes keyword relationships and their geographical distribution based on a comprehensive examination of 700 publications from the Web of Science. The findings highlight the transformative impact of auditing and digital accounting on business operations in response to rapid digitization. Key clusters identified shed light on digital transformation and the intersection between information technology and corporate management, revealing the evolving research landscape. The study discusses both practical and theoretical implications arising from these findings.

Transcranial magnetic stimulation, TMS, has been an innovative method of demure neuromodulation. This paper aims to delve into the different forms of its existence and to evaluate the use of TMS in five psychiatric disorders; Parkinson’s disease, schizophrenia, obsessive-compulsive disorder, major depressive disorder, and major anxiety disorder. Literature pertaining to the use of TMS in treating these specific diseases will be analyzed, and its efficacy and mechanisms will be explored. The literature will be evaluated through sources with established facts and research studies demonstrating function, potency, or inefficacy. TMS poses a method to have a more explicit effect on the regions of the brain, and the exploration of its use in the treatment of psychiatric diseases poses new possibilities in the treatment of psychiatric disorders. Venturing into the options it could have in a sole or combinatorial setting could provide penetrating insight into innovative forms of treatment and research.

Feline immunodeficiency virus (FIV) is a naturally-occurring retrovirus that infects domestic and non-domestic feline species, producing progressive immune depletion that results in an acquired immunodeficiency syndrome (AIDS). Much has been learned about FIV since it was first described in 1987, particularly in regard to its application as a model to study the closely related lentivirus, human immunodeficiency virus (HIV). In particular, FIV and HIV share remarkable structure and sequence organization, utilize parallel modes of receptor-mediated entry, and result in a similar spectrum of immunodeficiency-related diseases due to analogous modes of immune dysfunction. This review summarizes current knowledge of FIV infection kinetics and mechanisms of immune dysfunction in relation to opportunistic disease, specifically in regard to studying HIV pathogenesis. Furthermore, we present data which highlight changes in the oral microbiota and oral immune system during FIV infection, and outline the potential for the feline model of oral AIDS manifestations to elucidate pathogenic mechanisms of HIV-induced oral disease. Finally, we discuss advances in molecular biology, vaccine development, neurologic dysfunction, and the ability to apply pharmacologic interventions and sophisticated imaging technologies to study experimental and naturally occurring FIV, which provide an excellent, but often overlooked resource for advancing therapies and management of HIV/AIDS.

We assessed true bugs among above-groundand and soil inhabitants of four different biocoenosis of pine forests representing the intra-zone areas of flora and fauna of the Kazakh upland. 15 species of three families were listed for the Central Kazakhstan region for the first time. Species Eremocoris podagricus was not registered for the territory of Kazakhstan earlier. Fifteen species (50 %) were true above-ground inhabitants or ones living on grasses, whereas other species use soil surface and ground litter as temporary habitats. Drymus brunneus and Eremocoris fenestratus play a key role in the structure and function of the true bugs assemblages in the in biotopes studied. The ecological success of typically forest and boreal inhabitants in biotopes of arid region is explained by relict nature of forests and ancient connections with the taiga zone of Western Siberia and mountain forests of the Urals and Altai. The results of a comparative analysis of the similarities and differences of the dominant and ecological structures of Heteroptera complexes of aboriginal studied forests and derived type of forest are presented.

. Protein cysteine S-glycosylation is a relatively rare and less well characterized post-translational modification (PTM). Creating reliable model proteins that carry this modification is challenging. The lack of available model or natural S-glycosylated proteins significantly hampers the development of MS-based methodologies for detecting protein cysteine S-glycosylation in real-world proteomic studies. There is also limited MS-sequencing data describing easier to create synthetic S-glycopeptides. Here, we present the results of an in-depth manual analysis of automatically annotated CID/HCD spectra for model S-glucopeptides. The CID spectra show a long series of y/b-fragment ions with retained S-glucosylation, regardless of the dominant m/z signals corresponding to neutral loss of 1,2-anhydroglucose from the precursor ions. In addition, the spectra show signals manifesting glucosyl transfer from the cysteine position onto Lys, Arg side chains, and a peptide N-terminus. Other spectral evidence indicates that the N-glucosylated initial products of transfer are converted into N-furanosylated (i.e., glycated) structures due to Amadori rearrangement. We discuss the peculiar transfer of the glucose oxocarbenium ion (Glc+) to positively charged guanidinium residue (ArgH+) and propose a mechanism for the gas-phase Amadori rearrangement involving a hydride ion shift.

The implementation of management systems has become a strategic advantage in achieving business goals, especially in industrial organizations, but the implementation of social responsibility requirements is especially ethical. Large multinational companies have long been developing and, in particular, implementing their own codes of conduct, which include their suppliers, to demonstrate their commitment to Corporate Social Responsibility (CSR). The compliance with CSR requirements from stakeholders is thus extended or intertwined with requirements in established management systems (MSs). The objectives of the study were to (1) analyze the different approaches to CSR in internationally recognized cross-industry and industry-specific standards and codes in different industries; (2) select the most appropriate framework for assessing the degree of applicability of CSR in the selected management systems and develop a methodology for its assessment; (3) apply the proposed methodology (referred to as SRIMS) in the selected areas: automotive industry, research organization, and metallurgical industry; (4) through ANOVA, validate its use for assessing the overall level of CSR applicability in an organization's established management systems. The application of the Bonferroni method confirmed the hypotheses that the developed SRIMS model is a sufficiently appropriate tool for assessing the overall level of applicability of CSR requirements to established MSs.

Orodispersible film (ODF) is one of the novel formulations that have been currently made available that disintegrates rapidly in the mouth without the requisite for water and offer several benefits over conventional oral solid dosage formulations. This delivery system serves as a discreet and convenient mode of administration, especially in patients who have dysphagia, fluid restriction, being beneficial to pediatric, geriatric, and bedridden patients. A novel sildenafil ODF containing sildenafil citrate is formulated to be used in patients with erectile dysfunction (ED). This review discusses the advantages of ODF in improving compliance and satisfaction in these patients and describes the bioequivalence and stability studies of sildenafil ODF. This formulation offers unique benefit to patients with ED by improving their acceptance, compliance, and respecting their privacy. Moreover, the comparison of pharmacokinetic parameters between the sildenafil ODF administered with and without water and the conventional film-coated tablet were similar. It also demonstrated reliable performance that yielded a consistent product, meeting all specifications at release and after three weeks of storage under stressed conditions (60oC). Sildenafil ODF warrants improved ease of intake, taste, portability, storage, and compliance among ED patients, making it the potential most preferred formulation and drug of choice.

Climate change is significantly reshaping global and regional climates, with profound impacts on local microclimates and agricultural productivity. This study investigates the effects of climate change on regional microclimates and examines how these shifts influence agricultural output, focusing on case studies from vulnerable regions. Utilizing secondary climate data from international agencies, this research applies statistical techniques, including time series analysis, correlation analysis, and extreme value theory, to assess changes in temperature, precipitation, and other environmental factors. The study employs spatial analysis to explore the geographic variability in these effects, and regression models to quantify the relationship between climatic changes and crop yields. Preliminary results indicate a marked shift in microclimate patterns, with significant consequences for farming practices, particularly in regions reliant on climate-sensitive crops. The findings underscore the need for adaptive strategies in agricultural sectors to mitigate the risks posed by climate change. This research provides valuable insights for policymakers and farmers, emphasizing the importance of localized climate data in developing sustainable agricultural frameworks.

The aim of this study is to study the effect of aging in different media (deionized water and artificial saliva) on the force/torque generation by thermoplastic orthodontic aligners. Ten thermoformed aligners made of Essix ACE® thermoplastic sheets were aged in deionized water and in artificial saliva over two weeks at 37 C, five in each medium. The force/torque generated on upper second premolar (Tooth 25) of a resin model was measured at day 0 (before aging), 2, 4, 6, 10, and 14, using a biomechanical test set-up. The results showed that the thermocycling of aligners has no significant impact on their force/torque decay. No significant differences were also found in force/torque between the aligners stored in deionized water nor artificial saliva. The vertical extrusion-intrusion forces were measured in the range of 1.4 to 4.6 N, the horizontal oro-vestibular forces were 1.3 to 2.5 N, while the torques on mesio-distal rotation were 5.4 to 41.7 Nmm. It could be concluded that the influence of saliva on the mechanical properties can be classified as insignificant, and no significant difference between artificial aging in deionized water or artificial saliva was observed.

Keywords: Wall-like RC columns; Strengthening; FRP; NSM rebars; Steel plates; Testing; FE modeling; Preloading.

Self-driving vehicles demand efficient and reliable depth sensing technologies. Lidar, with its capacity for long-distance, high-precision measurement, is a crucial component in this pursuit. However, conventional mechanical scanning implementations suffer from reliability, cost, and frame rate limitations. Solid-state lidar solutions have emerged as a promising alternative, but the vast amount of photon data processed and stored using conventional direct time-of-flight (dToF) prevents long-distance sensing unless power-intensive partial histogram approaches are used. In this paper, we introduce a groundbreaking ‘guided’ dToF approach, harnessing external guidance from other onboard sensors to narrow down the depth search space for a power and data-efficient solution. This approach centers around a dToF sensor in-which the exposed time widow of independent pixels can be dynamically adjusted. We utilize a 64-by-32 macropixel dToF sensor and a pair of vision cameras to provide the guiding depth estimates. Our demonstrator captures a dynamic outdoor scene at 3 fps with distances up 75 m. Compared to a conventional full histogram approach, on-chip data is reduced by over 25 times, while the total laser cycles in each frame are reduced by at least 6 times compared to any partial histogram approach. The capability of guided dToF to mitigate multipath reflections is also demonstrated. For self-driving vehicles where a wealth of sensor data is already available, guided dToF opens new possibilities for efficient solid-state lidar.

Integrating artificial intelligence (AI) and natural language processing (NLP) technologies with project-based learning experiences in Science,Technology, Reading, Engineering, Arts, and Mathematics (STREAM) education offers the potential to enhance student engagement, critical thinking,problem-solving, and interdisciplinary learning. This paper presents a comprehensive approach to implementing AI and NLP technologies, such as ChatGPT, in STREAM project-based learning experiences, highlighting the potential advantages and challenges of this innovative educational approach. The proposed method encompasses personalized learning pathways, AI-powered research assistance, collaborative AI tools, real-time feedback, virtual mentoring, advanced simulation, and objective assessment. We also discuss the implications of this integration for educators, institutions, and students, along with recommendations for future research and development in this emerging field.

Respiratory transmission is the primary route of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) infection. Angiotensin I converting enzyme 2 (ACE2) is the known receptor of SARS-CoV-2 surface spike glycoprotein for entry into human cells. A recent study reported absent to low expression of ACE2 in a variety of human lung epithelial cell samples. Three bioprojects (PRJEB4337, PRJNA270632 and PRJNA280600) invariably found abundant expression of ACE1 (a homolog of ACE2 and also known as ACE) in human lungs compared to very low expression of ACE2. In fact, ACE1 has a wider and more abundant tissue distribution compared to ACE2. Although it is not obvious from the primary sequence alignment of ACE1 and ACE2, comparison of X-ray crystallographic structures show striking similarities in the regions of the peptidase domains (PD) of these proteins, which is known (for ACE2) to interact with the receptor binding domain (RBD) of the SARS-CoV-2 spike protein. Critical amino acids in ACE2 that mediate interaction with the viral spike protein are present and organized in the same order in the PD of ACE1. In silico analysis predicts comparable interaction of SARS-CoV-2 spike protein with ACE1 and ACE2. In addition, this study predicts from a list of 1263 already approved drugs that may interact with ACE2 and/or ACE1, potentially interfere with the entry of SARS-CoV-2 inside the host cells and alleviate the symptoms of Coronavirus disease (COVID-19).

The cork oak (Quercus suber L.), endemic essence of the Mediterranean Basin, is commonly used in traditional pharmacopoeia. The main objective of this work is to enhance the valorization of this plant species through the study of the anticandidosic activity of cork oak bark methalonic extracts in order to develop an efficient natural formulation for Candidiasis treatment.The anticandidosic activity of methanolic extracts of Q. suber bark stemming from decoction, maceration and Soxhlet methods of extraction in was tested on five different Candida albicans strains. Our results showed that all the tested extracts displayed an inhibitive activity, which varies according to the obtained extract and the tested strain. The best anticandidosic potential was observed with extracts obtained with Soxhlet method. The study of the acute toxicity showed that the lethal dose is 1150 mg/kg in mice, which remained moderately toxic according to Hodge and Sterner classification scale. Thus, this extract can be used in phytotherapy without danger in doses that are below 300 mg/kg of corporal weight. Based on these results, we can conclude that Cork oak bark extracts can be used to treat Candida albicans infections.

Generative artificial intelligence (GenAI) has been developing with many incredible achievements like ChatGPT and Bard. Deep generative model (DGM) is a branch of GenAI, which is preeminent in generating raster data such as image and sound due to strong points of deep neural network (DNN) in inference and recognition. The built-in inference mechanism of DNN, which simulates and aims to synaptic plasticity of human neuron network, fosters generation ability of DGM which produces surprised results with support of statistical flexibility. Two popular approaches in DGM are Variational Autoencoders (VAE) and Generative Adversarial Network (GAN). Both VAE and GAN have their own strong points although they share and imply underline theory of statistics as well as incredible complex via hidden layers of DNN when DNN becomes effective encoding/decoding functions without concrete specifications. In this research, VAE and GAN is unified into a consistent and consolidated model called Adversarial Variational Autoencoders (AVA) in which VAE and GAN complement each other, for instance, VAE is good at generator by encoding data via excellent ideology of Kullback-Leibler divergence and GAN is a significantly important method to assess reliability of data which is realistic or fake. In other words, AVA aims to improve accuracy of generative models, besides AVA extends function of simple generative models. In methodology this research focuses on combination of applied mathematical concepts and skillful techniques of computer programming in order to implement and solve complicated problems as simply as possible.

This study aimed to assess prescription transfer and medicines collection through Wasfaty, an electronic prescription service recently introduced in Saudi Arabia. A link to a cross-sectional online questionnaire was sent to all students and staff at the University of Jeddah, targeting beneficiaries who received e-prescriptions at the University Medical Centre (n = 2067). The questionnaire comprised 20 items under the following sections; demographics, patient perceptions and satisfaction with the Wasfaty service, and the availability of medicines. Of the 217 questionnaires received, the majority were filled by females (n = 125, 57.6%). Most were satisfied with the initial registration process of Wasfaty (n = 183, 84.1%). However, almost one-third of the participants reported that they could not find the prescribed medicines (n = 64, 29.7%), and most of them had to look for another pharmacy to obtain their treatment (n = 138, 63.9%). Respondents voiced their displeasure owing to the lack of access to certain pharmaceuticals, including anti-hypertensives and antidiabetics. This pilot study identified some challenges relating to the use of the Wasfaty service. Further attention to these challenges is required from the service providers, and a large-scale national study is warranted.

Internet users have significantly increased as a result of the spread of Internet of Things (IoT) technologies and 5G networks. But these developments also make people more susceptible to cybercrime. Intrusion detection systems (IDSs), which protect against cyber threats and facilitate early response, have emerged as crucial security measures to handle this expanding risk. This study intends to present a comprehensive review of IDS, how it interacts with machine learning (ML), and develop a suitable approach for attack detection in 5G and IoT environments. To accomplish this, we leverage the AWID dataset, which is the first wireless traffic dataset specifically designed for security purposes, focusing on the IEEE 802.11 standard and developed to the AWID3 dataset. In this research, we suggest a powerful machine-learning framework for wireless system intrusion detection. We perform evaluations in three stages, covering scenarios for multiple nominal classes, multiple numeric classes, and binary classes. In order to improve the performance of the intrusion detection model, we also use feature selection approaches. Additionally, we offer a model that incorporates the outcomes of three feature selection techniques, highlighting how crucial it is to comprehend the features present in wireless datasets. Our experiments demonstrate how a machine learning-based approach can detect attacks with a high level of accuracy. In particular, the boosted decision tree performs best when overlapping feature selection procedures, whereas the Logistic Regression approach obtains the maximum accuracy of 99% in the first two phases. By providing a comprehensive framework for identifying attacks in 5G and IoT contexts using machine learning approaches, this research makes a contribution to the field of intrusion detection. The results underline how important it is to comprehend wireless dataset characteristics and highlight the possibility of ML-based methods for attaining highly accurate intrusion detection.

According to the risk investigations of being involved in an accident, alcohol-impaired driving is one of the major causes of motor-vehicles accidents. Preventing highly intoxicated persons from driving would potentially save many lives. This paper proposes a lightweight in-vehicle alcohol detection that processes the data generated from 6-alcohol sensors (MQ-3 Alcohol Sensors) using an optimizable shallow neural network (O-SNN). The experimental evaluation results exhibit a high-performance detection system scoring a 99.8% of detection accuracy with a very short inferencing delay of 2.22 µ seconds. Hence, the proposed model can be efficiently deployed and used to discover in-vehicle alcohol with high accuracy and low inference overhead as a part of the driver alcohol detection system for safety (DADSS) system aiming at massive deployment of alcohol sensing systems that could potentially save thousands of lives annually.

The rise in Internet users has brought with it the impending threat of cybercrime as the Internet of Things (IoT) increases and the introduction of 5G technologies continues to transform our digital world. It is now essential to protect communication networks from illegal intrusions in order to guarantee data integrity and user privacy. In this situation, machine learning techniques used in data mining have proven to be effective tools for constructing intrusion detection systems (IDS) and improving their precision. We use the well-known AWID3 dataset, a comprehensive collection of wireless network traffic, to investigate the effectiveness of machine learning in enhancing network security. Our work primarily concentrates on the Krack and Kr00k attacks, which target the most recent and dangerous flaws in IEEE 802.11 protocols. Through diligent implementation, we were able to successfully identify these threats using an IDS model that is based on machine learning. Notably, the resilience of our method was demonstrated by our Ensemble classifier’s astounding 99% success rate in detecting the Krack attack. The effectiveness of our suggested remedy was further demonstrated by the high accuracy rate of 96.7% displayed by our Neural Network-based model in recognizing instances of the Kr00k attack. Our research shows the potential for considerably boosting network security in the face of new threats by leveraging the capabilities of machine learning and a diversified dataset. Our findings open the door for stronger, more proactive security measures to protect IEEE 802.11 networks’ integrity, resulting in a safer online environment for all users.

When generalized noncommutative Heisenberg algebra accommodating impacts of finite gravitational fields as specified by loop quantum gravity, doubly–special relativity, and string theory, for instance, is thoughtfully applied to the eight-dimensional manifold (M8), the generalization of the Riemannian manifold becomes imminent. By constructing the deformed affine connections on a four-dimensional Riemannian manifold, we have determined the minimal length deformation of Riemann curvature tensor and its contractions, the Ricci curvature tensor, and Ricci scalar. Consequently, we have been able to construct the deformed Einstein tensor. As in Einstein’s classical theory of general relativity, we have proved that the covariant derivative of the deformed Einstein tensor vanishes, as well. We conclude that the minimal length correction suggests a correction to the spacetime curvature which is manifest in the additional curvature terms of the corrected Riemann tensor and its contractions. Accordingly, the spacetime curvature endows additional curvature and geometrical structure.

Despite the scientific and technological development, libraries of Jordanian universities suffer from an obvious lack of digital information resources, because for many reasons, the most important of these is the non-application of intellectual property legislation (IPL) related to these resources. This study investigated the reality of the application of intellectual property legislation related to digital information resources at the libraries of public universities in Jordan. The population study consisted of all employees of departments of digital information resources. The study sample was (74) employees. Texts of regulations for the intended libraries and the Jordanian copyright law No. (22) for the year (1992) were reviewed and analyzed. In addition, a questionnaire was developed regarding the actual application of intellectual property legislation relating to digital resources at the university libraries in Jordan. Results revealed that the application of IP legislation relating to digital resources at the libraries of public universities in Jordan was moderate and that the supervising to the libraries of universities from the National Library regarding the protection of intellectual property rights of digital resources was moderate. The study recommended the application of intellectual property legislation related to digital resources in the intended libraries, this could be achieved through including intellectual property legislation in the regulations of public services in the intended libraries, to provide for the terms of protecting IP rights for digital resources, improving the legislation, developing of the Jordanian copyright law to be compatible with digital information resources, providing the necessary support for these libraries, and emphasizing the role of the National Library.

The main purpose of study is to identify the impact of COVID-19 pandemic on the green financing of banks and non-bank financial institutions (NBFIs) in an emerging economy such as Bangladesh. Also, this study shows the green banking activities of the banks and NBFIs during the pandemic. To analyze the impact of the pandemic on green financing, secondary data were obtained from the quarterly and annual reports of Bangladesh Bank (BB) on green financing as well as the annual reports and websites of 61 banks and 34 NBFIs in Bangladesh for the period 2021–2019. Subsequently, the study deployed dependent t-test statistics, growth rate (year-on-year), descriptive statistics, relative percentage changes, and varying tables and graphs to analyze the obtained secondary data. The empirical findings revealed that during the COVID-19 pandemic, there was an increase in green finance for all banks and NBFIs compared to before the epidemic, indicating that the pandemic had no negative impact on the total green finance growth of all banks and NBFIs. On the other hand, compared to the pre-pandemic period, bank-wise growth in green financing was higher for state-owned commercial banks (SOCBs), specialized banks (SDBs), and private commercial banks (PCBs) but lower for foreign-owned commercial banks (FCBs) during the COVID-19 epidemic. This suggests that the pandemic does not affect the expansion of green finance by SOCBs, SDBs and PCBs but significantly impacted the growth of green financing by FCBs. Furthermore, the research findings showed that the total outstanding and classified loans within the green finance investment decrease for both banks and NBFIs during the COVID-19 pandemic. The results indicated that the Bangladeshi banks’ level of automation towards green banking were satisfactory during the pandemic. Therefore, major policy implications for the green economic recovery by the government, BB, and managers of the banks and financial institutions in emerging economies like Bangladesh were discussed.

Three hundred ten 12-wek-old laying quails (155 each) were randomly selected from the initial population and kept in individual battery cages. The measurements of growth and egg production were determined to derive RFI. The relationship between RFI and egg quality, blood parameters and carcass characteristics was also determined. The results indicated that the gray quails had significantly higher egg mass and lower broken eggs compared to the white quails. A significant increase for eggshell strength and shell % was found in eggs produced from gray quails compared to white counterparts, although the shell thickness was the same. The results of multiple regression analysis clearly identified a significant effect of metabolic body weight and egg mass in computing expected feed intake rather than body weight gain in both varieties of Japanese quails. Strongly positive correlation between RFI and feed intake in both gray and white quail varieties was found. The same trend was also observed for feed conversion ratio (FCR). Therefore, including RFI in selection criteria of Japanese quail to improve FCR under high environmental temperature is highly recommended.

Electronic waste generation has been following a continuously rising trend. With electronics containing a myriad of materials some of which are hazardous, toxic, extremely rare or precious combined with more stringent legislative laws which encourage the reuse and optimised recycling of the materials included in e-waste, the need for a holistic approach is inevitable. Such an approach should not only identify the materials found in the various types of e-waste and their respective quantities but also needs to highlight the possible handling techniques and their respective impacts and associated hazards whether to the environment or human health. Performing such a task manually would be exasperating and costly while requiring extensive resources which might not be met with a justifiable economic gain; thus, the use of the advancement in computational sustainability to draw a complete picture and aid in an informed decision-making process is crucial. The e-waste ontology developed in this paper is one way of addressing the problem since it covers the treatment domain, the hazard and the materials contained within the different types of e-waste. The ontology developed can be used directly from the protégé software or by embedding it into a developed Decision Support System.

Balancing the efficiency and robustness of food systems is a well-known trade-off process. Over-optimization of efficiency may lead to excessive use of resources. On the other hand, under-optimization of efficiency may lead to excessive waste of resources. Using non-parametric methods can help in developing actionable frameworks through which decision-makers and stakeholders can effectively balance and improve food systems' efficiency and robustness. Under this context, this paper presents a new structured approach integrating two well-suited non-parametric methods for analyzing and balancing the interconnection between the efficiency and robustness of food systems. This approach consists of three main steps. First, the slacks-based data envelopment analysis (SBM-DEA) is utilized to analyze the efficiency of five food robustness dimensions. Second, the weighted efficiency of these dimensions is computed and analyzed to provide an insight into their influence on the food system efficiency. Finally, two search methods were developed to identify opportunities for improving efficiency and robustness. The outcomes of these methods have been analyzed and validated to ensure their effectiveness and viability. The operational and mathematical properties of the proposed approach were evaluated using data from thirty-seven food-producing countries. The weights of the robustness dimensions in this study were determined using the analytic hierarchy process (AHP) method. The input matrix of the AHP was constructed using expert judgment and consultations with stakeholders. The results of this study have shown an appropriate level of applicability and effectiveness of the proposed approach. While the first search method provided valuable insights, the second method proved to be more effective in identifying the sources of inefficacy of robustness dimensions. Several conclusions have been drawn and reported with some recommendations for future research works.

With the rapid expansion of intelligent resource-constrained devices and high-speed communication technologies, Internet of Things (IoT) has earned a wide recognition as the primary standard for low-power lossy networks (LLNs). Nevertheless, IoT infrastructures are vulnerable to cyber-attacks due to the constraints in computation, storage, and communication capacity of the endpoint devices. From one side, the majority of newly developed cyber-attacks are formed by slightly mutating formerly established cyber-attacks to produce a new attack tending to be treated as a normal traffic through the IoT network. From the other side, the influence of coupling the deep learning techniques with cybersecurity field has become a recent inclination of many security applications due to their impressive performance. In this paper, we provide a comprehensive development of a new intelligent and autonomous deep learning-based detection and classification system for cyber-attacks in IoT communication networks leveraging the power of convolutional neural networks, abbreviated as (IoT-IDCS-CNN). The proposed IoT-IDCS-CNN makes use of the high-performance computing employing the robust CUDA based Nvidia GPUs and the parallel processing employing the high-speed I9-Cores based Intel CPUs. In particular, the proposed system is composed of three subsystems: Feature Engineering subsystem, Feature Learning subsystem and Traffic classification subsystem. All subsystems are developed, verified, integrated, and validated in this research. To evaluate the developed system, we employed the NSL-KDD dataset which includes all the key attacks in the IoT computing. The simulation results demonstrated more than 99.3% and 98.2% of cyber-attacks’ classification accuracy for the binary-class classifier (normal vs anomaly) and the multi-class classifier (five categories) respectively. The proposed system was validated using k-fold cross validation method and was evaluated using the confusion matrix parameters (i.e., TN, TP, FN, FP) along with other classification performance metrics including precision, recall, F1-score, and false alarm rate. The test and evaluation results of the IoT-IDCS-CNN system outperformed many recent machine-learning based IDCS systems in the same area of study.

This study presents a novel Fe-CNs-P/S carbon composite material, synthesized by doping elements P and S into NH2-MIL-101 (Fe) using carbonization method. The material's application in sustainable water treatment was evaluated, focusing on its effectiveness in activating persulfate for pollutant degradation. The research thoroughly investigates the synthesis process, structural characteristics, and performance in degrading pollutants. Results indicate that Fe-CNs-P/S-5 with 50% P and S co-doping is higher than that of other samples, where the degradation rate of TC in 30min is as high as 98.11% under the optimum conditions, that is temperature at 25 ℃, 0.05 g/L of catalyst concentration, and 0.2 g/L of PMS concentration. The composite material demonstrates robust versatility and stability, maintaining high degradation efficiency across multiple organic pollutants, with no significant reduction in catalytic performance after four cycles. Furthermore, the free radical quenching experiments displays that the singlet oxygen 1O2 is the main active species. It is demonstrated that the doping of P and S play a role in the enhancement of PMS activation over the Fe-CNs-P/S catalyst. This material demonstrates remarkable efficacy in treating a range of organic contaminants and exhibits excellent reusability, presenting a promising approach for enhancing sustainability in water treatment applications.

The viewpoint and reaction of a country towards climate change are shaped by its political, cultural, and scientific backgrounds, in addition to the distinct characteristics of its evolving climate and the anticipated and actual consequences of the phenomenon in the times ahead. A region's climate has a significant impact on how water is managed and used, mostly in the primary sector (agroforestry systems, livestock, and agriculture), and both the distribution of ecosystem types and the amount and spreading of species on Earth. As a result, the environment and agricultural practices are affected by climate, so evaluating both distribution and evolution is extremely pertinent. Towards this aim, the climate distribution and evolution in the S. Francisco River basin (SFRB) is assessed in three periods (1970−2000, 1981−2022) in the past and 20412060 in the future from an ensemble of GCMs under two SSPs (Shared Socioeconomic Pathways), SSP2-4.5 and SSP5-8.5. The Köppen-Geiger (KG) climate classification system is analyzed, and climate change impacts are inferred for this watershed located in central-eastern Brazil, covering an area equivalent to 8% of the country. Results predict the disappearance of the hot-summer (Csa) and warm-summer (Csb) Mediterranean climates, and a reduction/increase in the tropical savanna with dry winter (Aw)/dry summer (As). A striking increase in the semi-arid hot (BSh-steppe) climate is predicted with a higher percentage (10%) under SSP5-8.5. The Source and the mouth of SFRB are projected to endure the major impacts of climate change that is followed by a predicted increase/decrease in temperature/precipitation. Future freshwater resource availability, and quality for human use will all be impacted. Consequences on ecosystems, agricultural and for the socioeconomic sectors within the SFRB might deepen the current contrasts between regions, urban and rural areas, and even between population groups, thus translating to a larger extent, the inequality that still characterizes Brazilian society. Maps depicting land use and cover changes in the São Francisco River basin from 1985 to 2022 highlight tendencies such as urbanization, agricultural expansion, deforestation, and changes in shrubland and water bodies. Urban areas fluctuated slightly, while cropland significantly increased from 33.57% to 45.45%, and forest areas decreased from 3.88% to 3.50%. Socioeconomic data reveals disparities among municipalities: 74.46% with medium Human Development Index (HDI), 0.59% with very high HDI, and 9.11% with low HDI. Most municipalities have a Gross Domestic Product (GDP) per capita below US$ 6,000. Population distribution maps show a predominance of small to medium-sized urban and rural communities, reflecting the basin's dispersed demographic and economic profile. To build routes towards a shared sustainable goal—namely, to adapt and reduce the expected climate change impacts in SFRB—it is imperative that integrated measures be conducted with the cooperation of stakeholders, local population, and decision-makers.

Background: The main objective of this study is to develop a customized metatarsophalangeal implant for the treatment of various conditions affecting this specific joint. This approach involves replacing the joint with a custom implant designed specifically to fit each patient's unique anatomical structure. The need for custom implants stems from the obvious lack of size variety available, which presents a major challenge when, the search for the ideal size implant can be a hard task, also when considering the possibility of extensive modification of the bone to adapt it to the available implant. This adaptation, often synonymous with bone reduction, can cause significant post-operative pain for the patient and impact healing time. Methods: A comparative study of modeling software was carried out to select the perfect software, by defining and comparing the relevant criteria. Similarly, the different biomaterial options were examined and compared to select the one best suited to this project, mentioning the imaging modality used to determine the types of images used for our approach. Finally, the 3D printers used in this work were represented, highlighting their technical characteristics. Findings: A resin metatarsophalangeal implant prototype was created using 3D modeling and reconstruction software and tools. Interpretation: Reconstruction and 3D modeling techniques are revolutionizing implant creation, offering customized solutions for patients suffering from metatarsophalangeal joint disorders caused by a wide range of diseases. These results have significant implications for disability management and rehabilitation, encouraging further exploration and progress.