A review of the concept of "fitness" as it is used in evolutionary theory.

It is well known that a sequence of two non-collinear Lorentz boosts (pure Lorentz transformations) does not correspond to a Lorentz boost, but involves a spatial rotation, the Wigner or Thomas-Wigner rotation. We visualize the interrelation between this rotation and the relativity of distant simultaneity by moving a Born-rigid object on a closed trajectory in several steps of uniform proper acceleration. Born-rigidity implies that the stern of the boosted object accelerates faster than its bow. It is shown that at least five boost steps are required to return the object's center to its starting position, if in each step the center is assumed to accelerate uniformly and for the same proper time duration. With these assumptions, the Thomas-Wigner rotation angle depends on a single parameter only. Furthermore, it is illustrated that accelerated motion implies the formation of an event horizon. The event horizons associated with the five boosts constitute a natural boundary to the rotated Born-rigid object and ensure its finite size.

Atomic structure of N-electron atoms is often determined using the Hartree-Fock method, which is an integro-differential equation. The exchange term of the Hartree-Fock equations is usually treated as an inhomogeneous term of a differential equation, or with a local density approximation. This work uses matrix methods to solve for the Hartree-Fock equations, rather than the more commonly-used shooting method to integrate an inhomogeneous differential equation. It is well known that a derivative operator can be expressed as a matrix made of finite-difference coefficients; energy eigenvalues and eigenvectors can be obtained by using computer linear-algebra packages. We extend the same technique to integro-differential equations, where a discretized integral can be written as a sum in matrix form. This method is compared against experiment and standard atomic structure calculations. We also can use this method for free-electron wavefunctions. This technique is important for spectral line broadening in two ways: improving the atomic structure calculations, and improving the motion of the plasma electrons that collide with the atom.

A three-dimensional vector field model is proposed, whose dimensions are the Hansen Solubility Parameters: dispersion parameter (δD), polarity parameter (δP), and hydrogen bonding parameter (δH). The vector space that defines the field has the peculiarity of having the dispersion vector with a magnitude of 2, as its base vector, while polarity and hydrogen bonding vectors have a magnitude of 1. A substance is characterised as a position vector, and the interaction between two substances is determined by calculating the vector difference of both, known as the interaction vector. Interaction among substances may involve solubility, swelling, cracking, surface tension, interface tension, and any physical phenomena where intermolecular energies of dispersion, polarity or hydrogen bonding come into play. This paper studies free surface energy (surface and interfacial tension). It has been found that free surface energy is directly proportional to the square of the magnitude of the interaction vector. The proportionality constant, τ, is expressed in length units, has a value of 0.025 nm, and does not depend on the chemical nature of the substance or state of matter (solid, liquid or gas). Constant value τ appears universal and aligns with the thickness of interfaces, thereby supporting Guggenheim's hypothesis. This hypothesis asserts that interfaces possess actual thickness and are not merely mathematical surfaces, as originally postulated by Gibbs. Moreover, it also has been found that interface thickness, τ, is approximately equal to half of the Bohr radius, a0, which is defined by universal constants. Because the solubility parameters of thousands of substances are known and can be easily determined from molecular structure, a good approximation of the surface and interfacial tension of any given substance can now be calculated. It has also been found that contact angles of sessile droplets in three-phased systems can be calculated from the interaction vectors of the implicated substances.

Molnupiravir, a prodrug known for its broad antiviral activity, demonstrated efficacy in animal models of Covid-19, prompting clinical trials where initial results indicated a significant effect against the disease. However, subsequent clinical studies did not confirm these findings, leading to the rejection of molnupiravir for permanent market authorization in many countries. This report critically assessed 19 studies published in 17 reports that investigated the efficacy of molnupiravir in animal models of Covid-19 with the purpose of determining how well the design of these models informed human studies. We found that the administered doses of molnupiravir in most studies involving animal Covid-19 models were disproportionately higher than the dose rec-ommended for human use. Specifically, when adjusted for body surface area, half of the doses of molnupiravir used in the animal studies were more than twice as high as the human dose. Addi-tionally, the drug was frequently given prophylactically or shortly after SARS-CoV-2 inoculation in these models, in contrast to clinical trials where such timing is not consistently achieved. Furthermore, the recommended five-day treatment duration for humans was exceeded in several animal studies. Collectively, we suggest that these design elements in the reported animal studies contributed to a bias favoring molnupiravir, and thus inflated expectations for its efficacy against Covid-19. Addressing these elements may offer avenues to enhance the clinical efficacy of mol-nupiravir for treatment of Covid-19 that include dose increment, early treatment, and admin-istration by inhalation along with use of molnupiravir in antiviral combination therapy.

Artificial intelligence-powered generative language models (GLMs), such as ChatGPT and Google Bard, have the potential to provide personalized learning, unlimited practice opportunities, and interactive engagement 24/7, with immediate feedback. However, to fully utilize GLMs, properly formulated instructions are essential. Prompt engineering is a systematic approach to effectively communicating with GLMs to achieve the desired results. Well-crafted prompts yield good responses from the GLM, while poorly constructed prompts will lead to unsatisfactory responses. Besides the challenges of prompt engineering, significant concerns are associated with using GLMs in medical education, including ensuring accuracy, mitigating bias, maintaining privacy, and avoiding excessive reliance on technology. Future directions involve developing more sophisticated prompt engineering techniques, integrating GLMs with other technologies, creating personalized learning pathways, and researching the effectiveness of GLMs in medical education.

Concomitant neuropathological hallmarks of Alzheimer’s Disease (AD) are common in the brains of people with Parkinson’s disease (PD). Furthermore, AD biomarkers are associated with cognitive decline and dementia in PD patients during life. Here, we highlight the considerable overlap between AD and PD, emphasizing neuropathological, biomarker, and mechanistic studies. We suggest that precision medicine approaches may successfully identify PD patients most likely to develop concomitant AD. The ability to identify PD patients at high risk for future concomitant AD in turn provides an ideal cohort for trials of AD-directed therapies in PD patients, aimed at delaying or preventing cognitive symptoms.

Animal welfare is not only an ethically important consideration in good animal husbandry, but can also have a significant effect on an animal’s productivity. The aim of this paper is to show that a reduction in animal welfare, in the form of increased stress, can be identified in pigs from frontal images of the animals. We train a Convolutional Neural Network (CNN) using a leave-one-out design and show that it is able to discriminate between stressed and unstressed pigs with an accuracy of >90% in unseen animals. Grad-CAM is used to identify the animal regions used, and these support those used in manual assessments such as the Pig Grimace Scale. This innovative work paves the way for further work examining both positive and negative welfare states with a view to the development of an automated system that can be used in precision livestock farming to improve animal welfare.

The aims of the review were to elucidate the spatial variation in sea ice algae primary production rates and biomasses (Chl a) in the Canadian Arctic – Greenland region, characterized by comparable physical settings. A database was compiled from 30 studies of sea ice algae primary production rates, biomasses (Chl a), snow and ice thicknesses, ice types, nutrient (Si(OH)4, PO4, (NO3+NO2), and (NH4) concentrations in ice and below ice from the region. Production rates were significantly high (463 mg C m-2 d-1) in Resolute Bay and in Northern Baffin Bay (317 mg C m-2 d-1) both in Canadian Arctic, as compared to a rate of 0.2 mg C m-2 d-1 in northeast Greenland. The biomasses reached 340 mg Chl a m-2 in Resolute Bay in comparison to a 0.02 mg Chl a m-2 in southwest Greenland. Primary production at other Canadian and Greenland sites were comparable but sea ice Chl a was higher (15.0 ± 13.4 mg Chl a m-2) at Canadian sites as compared to Greenland (0.8 ± 0.5 mg Chl a m-2). Resolute and Northern Baffin Bays production rates were significantly higher when compared to other Arctic Ocean sites outside the studied region. The review concludes that high production rates and biomasses in Resolute and Northern Baffin Bay’s were related to inflow and mixing of nutrient rich waters of Pacific origin. A conceptual model with drivers and inhibitors of sea ice algae primary production is projected, and the database compiles a dataset of published data for further studies.

Consideration of climate change in Environmental Impact Assessment (EIA) is a rather novel topic, which became partly mandatory through the revised EU Directive on EIA. Through a mixed-methods approach involving key-actors from EIA practice, decision making and climate adaptation planning, this study presents a transdisciplinary point of view on barriers and opportunities to tackle climate change adaptation in environmental assessment of large-scale projects. It is based on both a retrospective ex-post evaluation of existing practices in Austria and Germany as well as prescriptive examination and development of outcomes for practice through the development of a climate-fit toolkit that supports the incorporation of climate change impacts into EIAs. The scenario analysis applied with a back casting approach provided the opportunity to look beyond limitations related to legal compliance and partly lack of data identified by previous research. Three scenario narratives were elaborated based on nine key impact factors based on literature review, content analysis of EIA documents and interviews with EIA actors. The groups of actors carried out a prioritization of actions towards consideration of climate change in EIA. Finally, the actors were involved in co-production of an online tool-kit for Austrian and German EIA practice.

Background. Candida bloodstream infections (CBSIs) have decreased among pediatric populations in the United States, but remain an important cause of morbidity and mortality. Species distributions and susceptibility patterns of CBSI isolates diverge widely between children and adults. Awareness of these patterns can inform clinical decision-making for empiric or pre-emptive therapy of children at risk for candidemia. Methods. CBSIs occurring from 2006-2016 among patients in a large children’s hospital were analyzed for age specific trends in incidence rate, risk factors for breakthrough-CBSI and death, as well as underlying conditions. Candida species distributions and susceptibility patterns were evaluated in addition to antifungal agent use. Results. The overall incidence rate of CBSI among this complex patient population was 1.97/1,000 patient-days. About half of CBSI episodes occurred in immunocompetent children and 14% in Neonatal Intensive Care Unit (NICU) patients. Antifungal resistance was minimal: 96.7% of isolates were fluconazole-, 99% were micafungin-, and all were amphotericin susceptible. Liposomal amphotericin was the most commonly prescribed antifungal agent including for NICU patients. Overall CBSI-associated mortality was 13.7%; there were no deaths associated with CBSI among NICU patients after 2011. Conclusions. Pediatric CBSI characteristics differ substantially from those in adults. Improved management of underlying diseases and antimicrobial stewardship may further decrease morbidity and mortality from CBSI while continuing to maintain low resistance rates among Candida isolates.

This paper presents a concise mathematical framework for investigating both feed-forward and backward process, during the training to learn model weights, of an artificial neural network (ANN). Inspired from the idea of the two-step rule for backpropagation, we define a notion of F_adjoint which is aimed at a better description of the backpropagation algorithm. In particular, by introducing the notions of F-propagation and F-adjoint through a deep neural network architecture, the backpropagation associated to a cost/loss function is proven to be completely characterized by the F-adjoint of the corresponding F-propagation relatively to the partial derivative, with respect to the inputs, of the cost function.

MicroRNA-155 (miR-155) expression promotes inflammatory responses in macrophages. Activation of macrophages with lipopolysaccharide (LPS) elevates miR-155, while the anti-inflammatory cytokine interleukin-10 (IL10) reduces miR-155 levels. MiR-155 exists in two forms, miR-155-5p and miR-155-3p, produced from the precursor of miR-155 (pre-miR-155). MiR-155-5p is the most abundant strand in activated macrophages, but in response to LPS, the miR-155-3p level is upregulated first, followed by miR-155-5p later. We have previously identified CELF2 protein which interacts with pre-miR-155 and impairs miR-155-5p expression. We now show that CELF2 only regulates the miR-155-5p expression and that another protein FUBP1 controls miR-155-3p levels in response to LPS and IL10.

Energy demand flexibility is important to balance supply and demand in energy systems based on renewables. However, attempts to steer the timing of energy demand seem to overlook how energy practices are influenced by the wider network of things and technologies in homes. Based on photos from house visits, this paper demonstrates the importance of various material relations for the timing of energy practices to assess the potential of flexible energy demand. The study focuses on the practices of washing clothes and charging batteries using three locations of material energy flexibility; embedded flexibility refers to built-in functions, connected flexibility lies in the interplay between technologies and objects, and networked flexibility situated in systems of things, including energy infrastructure, house layout, and matter. The results show how material relations challenge energy flexibility, for example, when devices compete over plugs, stuff is in the way, and convenience is prioritized. The study suggests that the flexibility of an appliance is viewed in a wider network of things, technologies, and infrastructures, including battery capacities, and that policy pays more attention to energy flexibility in the context of material networks and that energy flexibility risks being overlooked in demands for convenience and comfort.

The widely adopted temperature for solid solution heat treatment (ST) for the conventionally fabricated Inconel 718 is 1100 °C for a hold time of 1 h or less. This ST scheme is however not enough to dissolve Laves and annihilate dislocations completely in samples fabricated with Laser metal powder bed fusion (L-PBF) additive manufacturing (AM)-Inconel 718. In spite this, the highest hardness obtained after aging for ST temperatures (970 - 1250 °C) is at 1100 °C/1h [1]. The unreleased residual stresses in the retained lattice defects are potentially affecting other properties of the material. Hence, this work aims to investigate if a longer hold time of ST at 1100 °C will lead to complete recrystallization while maintaining the strength after aging or not. For this study, L-PBF-Inconel 718 samples were ST at 1100 °C at various hold times (1, 3, 6, 9, 16 or 24 h) and aged to study the effects on microstructure and hardness. In addition, a sample was directly aged to study the effects of bypassing ST. The samples (ST and aged) gain hardness by 43 – 49 %, depending on hold time. A high density of annealing twins evolved during 3 h of ST and the quantity only slightly varies for longer ST.

Older adults with diabetes are at elevated risk of complications following hospitalization. Home health care services mitigate the risk of adverse events and facilitate a safe transition home. In the United States, when home health care services are prescribed, federal guidelines require they begin within two days of hospital discharge. This study examined the association between timing of home health care initiation and 30-day rehospitalization outcomes in a cohort of 786,734 Medicare beneficiaries following a diabetes-related index hospitalization. Of these patients, 26.6% were discharged to home health care. To evaluate the association between timing of home health care initiation and 30-day rehospitalizations, multivariate logistic regression models including patient demographics, clinical, geographic variables, and neighborhood socio-economic variables were used. Inverse probability-weighted propensity scores were incorporated into the analysis to account for potential confounding between the timing of home health care initiation and the outcome in the cohort. Compared to patients who received home health care within the recommended first two days, patients who received delayed services (3-7 days after discharge) had higher odds of rehospitalization (OR 1.28, 95% CI 1.25-1.32). Among patients who received late services (8-14 days after discharge), the odds of rehospitalization were four times greater than for patients receiving services within 2 days (OR 4.12, 95% CI 3.97-4.28). Timely initiation of home health care following diabetes-related hospitalizations is one strategy to improve outcomes.

In the recent past about 40 botulinum neurotoxin (BoNT) subtypes belonging to serotypes A, B, E, and F pathogenic to humans were identified among hundreds of independent isolates. BoNTs are the etiological factors of botulism and represent potential bioweapons, but are also recognized pharmaceuticals for efficient counteraction of hyperactive nerve terminals in a variety of human diseases. The detailed biochemical characterization of subtypes as the basis for development of suitable countermeasures and possible novel therapeutic applications is lagging behind the increase in new subtypes. Here we report the primary structure of a ninth subtype of BoNT/F. Its amino acid sequence diverges by at least 8.4% at the holotoxin and 13.4% on the enzymatic domain level from all other known BoNT/F subtypes. We found that BoNT/F9 shares the scissile Q⁵⁸/K⁵⁹ bond in its substrate vesicle associated membrane protein 2 with the prototype BoNT/F1. Comparative biochemical analyses of four BoNT/F enzymatic domains showed that the catalytic efficiencies decrease in the order F1 > F7 > F9 > F6 and vary by up to factor eight. K_M values increase in the order F1 > F9 > F6 ≈ F7, whereas k_cat decreases in the order F7 > F1 > F9 > F6. Comparative substrate scanning mutagenesis studies revealed a unique pattern of crucial substrate residues for each subtype. Based upon structural coordinates of F1 bound to an inhibitor polypeptide the mutational analyses suggest different substrate interactions in the substrate binding channel of each subtype.

Today, more than 70 million tons of lignin are produced by the pulp and paper industry every year. However, the utilization of lignin as a source for chemical synthesis is still limited due to the complex and heterogeneous lignin structure. The purpose of this study was a selective photodegradation of industrially available kraft lignin in order to obtain appropriate fragments and building block chemicals for further utilization, e.g. polymerization. Thus, kraft lignin obtained from soft wood black liquor by acidification was dissolved in sodium hydroxide and irradiated at a wavelength of 254 nm with and without the presence of titanium dioxide in various concentrations. Analyses of the irradiated products via SEC showed decreasing molar masses and decreasing polydispersity indices over time. At the end of the irradiation period the lignin was depolymerised to form fragments as small as the lignin monomers. TOC analyses showed minimal mineralisation due to the depolymerisation process.

It has been proven that in standard Einstein gravity, exotic matter (i.e. matter violating the point-wise and averaged weak and null energy conditions) is required to stabilize traversable wormholes. Quantum field theory permits these violations due to the quantum coherent effects found in any quantum field . Even reasonable classical scalar fields violate the energy conditions. In the case of the Casimir effect and squeezed vacuum states, these violations have been experimentally proven. It is advantageous to investigate methods of minimizing the use of exotic matter. One such area of interest is extended theories of Einstein gravity. It has been claimed that in some extended theories, stable traversable wormholes solutions can be found without the use of exotic matter. There are many extended theories of gravity and in this review paper we first explore f(R) theories and then explore some wormhole solutions in f(R) theories including Lovelock gravity.

SARS-CoV-2 (2019-nCoV), a novel coronavirus, caused the pneumonia outbreak in China and continue to expand. The host receptor for 2019-nCoV Angiotensin-converting enzyme 2 (ACE2), is the same as the host receptor for SARS-CoV. Targeting ACE2 holds the promise for preventing and inhibiting 2019-nCoV infection. Chinese Medicine herbs could be a valuable pool for identifying active compounds for treating infection of 2019-nCoV. In this study, we summarize several active compounds, including baicalin, Scutellarin, Hesperetin, Nicotianamine and glycyrrhizin that could have potential anti-2019-nCoV effects. We conduct molecular docking to predict their capacity for binding ACE2, which may prevent the 2019-nCoV infection. We propose that these selected compounds worth further investigation for preventing 2019-nCoV.

The allosteric SERCA (Sarcoplasmic/Endoplasmic Reticulum Ca2+-ATPase) activator CDN1163 has been recently added to the group of pharmacological tools for probing SERCA function. We chose to investigate the effects of the compound on T lymphocyte Ca2+ stores, using the well-described Jurkat T lymphocyte as a reliable cell system for Ca2+ signaling pathways. Our study identified the lowest concentrations of the SERCA inhibitors thapsigargin (TG) and 2,5-di-(tert butyl)-1,4-benzohydroquinone (tBHQ) capable of releasing Ca2+, permitting the differentiation of the TG-sensitive SERCA 2b Ca2+ store from the tBHQ-sensitive SERCA 3 Ca2+ store. We proceeded to test the effects of CDN1163 on Ca2+ stores, examining specific actions on the SERCA 2b and SERCA 3 Ca2+ pools using our low dose SERCA blocker regimen. In contrast to previous work, we find CDN1163 exerts complex time-sensitive and SERCA isoform-specific actions on Ca2+ stores. Surprisingly, short-term exposure (0-30 minutes) to CDN1163 perturbs T cell Ca2+ stores by suppressing Ca2+ uptake with diminished Ca2+ release from the SERCA 2b-controlled store. Concomitantly, we find evidence for a SERCA-activating effect of CDN1163 on the SERCA 3 regulated store, given the observation of increased Ca2+ release inducible by low dose tBHQ. Intriguingly, longer-term (>12 hours) CDN1163 exposure reversed this pattern, with increased Ca2+ release from SERCA 2b-regulated pools, yet decreased Ca2+ release responses from tBHQ-sensitive SERCA 3 pool. Our results reveal differential effects of CDN1163 on Ca2+ stores regulated by distinct SERCA isoforms, prompting the need for careful interpretation of the compound’s effects, particularly in cells expressing multiple SERCA isoforms.

Racial and ethnic disparities exist in diabetes prevalence, health services utilization, and out-comes including disabling and life-threatening complications. Home health care may especially benefit older adults with diabetes through individualized education, advocacy, care coordina-tion, and psychosocial support for patients and their caregivers. This study examined factors as-sociated with hospital discharge to home health care and subsequent utilization of home health care among a cohort of Medicare beneficiaries with diabetes, age 50 and older, living in the United States. The cohort (n=786,758) was followed for 14 days after a diabetes-related index hospitalization, using linked Medicare administrative, claims, and assessment data (2014-2016). Multivariate logistic regression models included patient demographics, comorbidities, hospital length of stay, geographic region, neighborhood area deprivation, and rural/urban setting. In ful-ly adjusted models, hospital discharge to home health care was significantly less likely among Hispanic (OR 0.8, 95% CI 0.8-0.8) and American Indian (OR 0.8, CI 0.8-0.8) compared to white patients. Among those discharged to home health care, all racial/ethnic minority patients were less likely to receive services within 14-days. Further work should focus on eliminating systemic racism in home health care referral and systemic barriers to receiving home health care services.

Neurological disorders are the leading cause of cognitive and physical disability worldwide, affecting 15% of the global population. Due to the demographics of aging, the prevalence of neurological disorders, including neurodegenerative diseases, will double over the next two decades. Unfortunately, while available therapies provide symptomatic relief for cognitive and motor impairment, there is an urgent unmet need to develop disease-modifying therapies that slow the rate of pathological progression. In that context, biomarkers could identify at-risk and prodromal patients, monitor disease progression, track response to therapy, and parse causality of molecular events to identify novel targets for further clinical investigation. Thus, identifying biomarkers that discriminate between diseases and reflect specific stages of pathology would catalyze the discovery and development of therapeutic targets. This review will describe the prevalence, known mechanisms, ongoing or recently concluded therapeutic clinical trials, and biomarkers of three of the most prevalent neurodegenerative diseases, including Alzheimer’s disease (AD), amyotrophic lateral sclerosis (ALS), and Parkinson’s disease (PD).

Introduction: The choice of Cardiac Preservation Solution (CPS) for myocardial protection at the time of heart procurement remains controversial and uncertainties persist regarding its effect on the early and midterm Heart Transplantation (HTx) outcomes. Thus, we retrospectively analyzed our adult HTx performed with two different CPS, during a period of 12 years, in terms of hospital mortality, mid-term survival, inotropic score, primary graft dysfunction and rejection score. Methods: From January 2009 to December 2020, 154 adult HT were performed in our hospital. Patients were divided in two groups according to the CPS used: St. Thomas (n=75, group P 1) and HTK-Custodiol (n=79, group P 2). The choice of CPS was related to an institutional policy; from 2009 to 2015, St. Thomas solution was exclusively used, and after that, HTK-Custodiol alone. Results: There was no significant difference between the two groups in terms of preoperative and intraoperative features. Postoperatively, the Custodiol group showed significantly lower inotropic score (p<0.0001), mean rejection score (p= 0.036) and 30 days mortality (p=0.0068). The use of HTK-Custodiol was the only variable that improved midterm survival (HTK-Custodiol vs St Thomas, HR= 0.20 (95% CI: 0.069 -0.6) p=0.0039). Conclusion: In our single center experience, using HTK-Custodiol as myocardial protection during heart procurement leads to improved outcomes after HTx, including postoperative inotropic score, rejection score, 30-days mortality and midterm survival.

Recently a measure termed F* was described, as an interpretable transformation of the F measure, also known as the Dice coefficient. Using elementary mathematical methods, it is shown that F* is in fact identical to a previously described measure, monotonically related to the F measure, and variously termed in previous publications, dating from the late 19^th to the late 20^th century, as the ratio of verification, the Jaccard similarity measure or index, the threat score, the Tanimoto index, and the critical success index. The origins of these different terms in different disciplines (weather forecasting, ecology, machine learning) may explain the repeated independent redescription of this measure.

Backward electromagnetic waves are extraordinary waves with contra-directed phase velocity and energy flux. Unusual properties of the coherent nonlinear optical coupling of the phase-matched ordinary and backward electromagnetic waves with contra-directed energy fluxes are described which enable greatly-enhanced frequency and propagation direction conversion, parametrical amplification, as well as control of shape of the light pulses. Extraordinary transient processes that emerge in such metamaterials in pulsed regimes are described. The results of the numerical simulation of particular plasmonic metamaterials with hyperbolic dispersion are presented, which prove the possibility to match phases of such coupled guided ordinary and backward electromagnetic waves. Particular properties of the outlined processes in the proposed metamaterial are demonstrated through numerical simulations. Potential applications include ultra-miniature amplifiers, frequency changing reflectors, modulators, pulse shapers, and remotely actuated sensors.

The rock joint fissure slope in cold regions is prone to deformation and failure problems such as relaxation, tension and collapse under freeze-thaw (F-T) cycles. Based on the ideology of clean production and promoting the structural integrity of geotechnical projects in cold areas, this study designed and prepared aeolian-sand (AS) to replace part of river sand as a filling mortar material by taking advantage of the low cost and easy availability of AS. Investigations were carried out to determine the impact of varying proportions of AS in mortar on the microstructure and shear properties of the mortar-rock interface under F-T cycles. Therefore, F-T cycle testing, nuclear magnetic resonance (NMR) testing and shear testing were carried out on grout with different proportions of AS. The results show that the right proportion of AS replacement could enhance the shear deformation resistance and F-T resistance of the mortar-rock interface, and 30% proportion is the optimal proportion. By increasing of F-T cycles, the three types of specimens showed different degrees of particle spalling, shedding and cracking. The slurry-rock interface layer in the A (0%) group exhibited the most severe F-T deterioration, while the B (15%) group showed a lesser degree, and the C (30%) group performed the best. T2 spectrum curve and total spectrum area change law from the microscopic point of view to verify the 30% AS proportion mortar-rock interface F-T resistance is the strongest, followed by 15% AS proportion mortar, the weakest is ordinary mortar. The degradation of the mortar-rock bond is primarily due to the conversion of solid to liquid phases and the movement of internal water caused by fluctuating temperatures. The extent of F-T deterioration in the slurry-rock interface layer is greatly affected by the varying proportions of AS. The shear strength and shear stiffness of specific proportion of AS decreased with the increase of F-T cycles. For same F-T cycles, the shear strength and shear stiffness of group C (30%) were the highest, followed by group B (15%) and group A (0%). The grout material not only reinforces the F-T joint fissure slope, but also reduces the cost of grout reinforcement and promotes the clean production of geotechnical structures.

(S)-Atenolol ((S)-2-(4-(2-Hydroxy-3-(isopropylamino)propoxy)phenyl)acetamide) has been synthesized in >99% ee with use of Candida antarctica lipase B from Syncozymes (Shanghai, China), in a kinetic resolution of the corresponding racemic chlorohydrin. Deprotonation of the starting phenol building block was base catalyzed. The enantiopurity of the chlorohydrin building block remained unchanged upon subsequent amination. All four steps in the synthesis protocol have been optimized compared to previously reported methods, which makes this new protocol more sustainable and in accordance with green chemistry principles compared to previously reported protocols.

Various authors have highlighted the importance of marriage as a social marker that alter the so-cial categorization of individuals and their relationships from youth to adulthood according to the cultural construction of the life course in Arab countries. This article aims to analyze the in-teraction between the socio-political framework (structure) and the capacity for individual action (agency) in the context of biographical experiences to achieve emancipation in Morocco. This per-spective responds to the demand of different authors to include the subjective approaches of young people in the process of analysis. This analysis will be guided by some questions: Which is the capacity of young Arabs to decide the orientation of their life trajectories? What factors (cultural, family, socioeconomic, educational, etc.) create and shape the expectations of young people re-garding their transition to adult life? Is there a specific model of emancipation in the Arab Medi-terranean countries?

The new digital infrastructure has become an important basis for the green development of agriculture. This paper selects provincial sample data from 2006 to 2022, constructs an indicator system to measure new digital infrastructure and agricultural green total factor productivity, and explores how new digital infrastructure can promote agricultural green development. The results show that: (1) the new digital infrastructure has a significant role in promoting the green development of agriculture, and this conclusion is still valid after processing endogeneity and heteroscedasticity; (2) Technology and land factors play an intermediary role in the promotion of green agricultural development by the new digital infrastructure, that is, the new digital infrastructure helps to improve the quality and technical level of cultivated land and thus promote green agricultural development; (3) Labor force factors optimize the mediating role of technology factors, that is, the higher the quality of labor force, the stronger the role of the new digital infrastructure in promoting the green development of agriculture through the technological path; (4) The effect of new digital infrastructure on the green development of agriculture is obviously heterogeneous, and the effect is more obvious in northwest China and the regions with lower marketization level, higher environmental regulation level. This study is helpful to clarify the relationship between new digital infrastructure and agricultural green development in China, and provide corresponding policy suggestions for promoting regional agricultural green development.

A popular approach to learning about admixture from population genetic data is by computing the allele-sharing summary statistics known as f-statistics. Compared to some methods in population genetics, f-statistics are relatively simple, but interpreting them can still be complicated at times. In addition, f-statistics can be used to build admixture graphs (multi-population trees allowing for admixture events), which provide more explicit and thorough modeling capabilities but are correspondingly more complex to work with. Here, I discuss some of these issues to provide users of these tools with a basic guide for protocols and procedures. My focus is on the kinds of conclusions that can or cannot be drawn from the results of f₄-statistics and admixture graphs, illustrated with real-world examples involving human populations.

Antioxidant activity is an essential feature required for oxygen-sensitive merchandise and goods, such as food and corresponding packaging as well as materials used in cosmetics and biomedicine. For example, vanillin, one of the most prominent antioxidants, is fabricated from lignin, the second most abundant natural polymer in the world. Antioxidant potential is primarily related to the termination of oxidation propagation reactions through hydrogen transfer. The application of technical lignin as a natural antioxidant has not yet been implemented in the industrial sector, mainly due to the complex heterogeneous structure and polydispersity of lignin. Thus, current research focuses on various isolation and purification strategies to improve the compatibility of lignin material with substrates and enhancing its stabilizing effect. This contribution presents antioxidant capacity studies of various lignins depending on purification degree of the raw material. In detail, the antioxidant potential of lignin-based compounds is studied using the DPPH (2,2-diphenyl-1-picrylhydrazyl) assay. The purification procedure was monitored by thin layer chromatography (TLC) and showed that double-fold selective extraction is the most efficient purification procedure (confirmed by UV-Vis, FTIR, HSQC and 31P NMR spectroscopy, SEC and XRD analysis). Results are discussed regarding the dependency of antioxidant activity on lignin structure and biomass source. Thus, lignins obtained from industrial black liquor are compared with beech wood samples. In addition, the influence of lignin isolation (kraft versus organosolv) is discussed. Values of the antioxidant activity (DPPH inhibition) of kraft lignin fractions were 62-68% while beech and spruce/pine-mixed lignins showed values between 26, 64 and 42%, respectively. TPC values of the different isolated kraft lignin fractions varied between 26-35%, while beech, spruce/pine lignins were 34, 30 and 34%, respectively. Storage decreased the TPC values and increased the DPPH inhibition.

Corynebacterium glutamicum is prominent for the industrial production of secreted amino acids. Notably, it naturally accumulates the carotenoid pigment decaprenoxanthin in its membranes. Metabolic engineering enabled production of astaxanthin. Here, a bioprocess for astaxanthin production in lab-scale stirred bioreactors was established by a DoE-guided approach to optimize the basic process parameters pH, rDOS, aeration rate as well as inoculation cell density. The DoE-guided approach from 2 L scale cultivation revealed that the pH showed the strongest effect on the product formation. Subsequently, an optimum at pH 8, an aeration rate of 0.25 vvm, 30 % rDOS and an initial optical density of 1 was established that allowed production of 7.6±0.6mg L-1 astaxanthin in batch mode. These process conditions were successfully transferred to a fed-batch process resulting in a high cell density cultivation with up to 60 g CDW L-1 biomass and 64 mg L-1 astaxanthin and thus demonstrating an about 9-fold improvement compared to optimal batch conditions. Moreover, pH shifts experiments indicate that the cells can quickly adapt to a change from pH 6 to 8 and start producing astaxanthin showing the possibility of a biphasic bioprocesses for astaxanthin production.

Thesis Statement: The consumption of externally fermented foods acted as the initial metabolic trigger enabling hominid brain expansion. Because brain tissue is metabolically expensive, it is thought that the evolution of humans’ large brains was only possible through a concomitant reduction in the size of another expensive organ system, the gut. However, this gut reduction must have itself been made possible by dietary changes, the nature of which are still unclear. Here, we propose that the initial metabolic trigger of hominid brain expansion may have been the consumption of externally fermented foods. We define “external fermentation” as occurring outside the body, as opposed to the internal fermentation that occurs through the gut microbiome. This practice could have begun accidentally and with limited understanding, but over time, fermentation technologies may have become increasingly intentional, socially-transmitted, and culturally-reinforced. We detail the mechanisms by which external fermentation can mediate the evolution of increased brain size, as well as a reduction in gut size, by increasing the bioavailability of macro- and micronutrients while reducing digestive energy expenditure. Importantly, we calculate that the reduction in human gut size relative to modern apes is mainly due to a reduction in the colon, the site of internal fermentation. We also discuss the explanatory power of our hypothesis relative to others, including realistic plausibility in hominids with brains roughly the size of modern chimpanzees. Finally, we survey external fermentation practices across human cultures to demonstrate its viability across a huge range of environments, temperatures, and food sources. We close with suggestions for empirical tests.

Selective Paste Intrusion (SPI) is an additive manufacturing (AM) process in which thin layers of aggregates are selectively bonded by cement paste only where the structure is to be produced. In this way, concrete elements with complex geometries and structures can be created. Reinforcement is required to increase the flexural strength of the concrete elements and, thus, enable their applicability in practice. Integrating the reinforcement is a difficult task, particularly in the case of SPI due to the layer-wise printing method. Especially with respect to possible complex structures, the production of the reinforcement needs to be adapted to SPI, thereby offering a high degree of freedom. One concept for a reinforcement integration is combining the two additive manufacturing processes SPI and Wire and Arc Additive Manufacturing (WAAM). However, since the two processes serve different fields of application, their compatibility is not necessarily given. Ongoing investigations show that the temperatures caused by WAAM adversely affect both, the cement paste rheology required for sufficient paste penetration into the particle bed and the overall concrete strength. This paper provides an overview of ongoing research focusing on different cooling strategies and their effects on the compressive strength of SPI-printed concrete parts.

In this work, a GaN-on-Si quasi-vertical Schottky diode was demonstrated on a locally grown n-GaN drift layer. The diode achieves a high current density of 2.5 kA/cm², a specific on-resistance RON,sp of 1.9 mΩ.cm² despite the crowding effect in quasi-vertical device and on/off current ratio (Ion/Ioff) of 1010. Temperature-dependent current-voltage characteristics have been measured in the range of 300-433 K to investigate the mechanisms of leakage conduction in the device. At near zero bias, thermionic emission (TE) was found to dominate. At voltage range from -1 to -10 V, electrons gain enough energy to excite into trap states, leading to the dominance of Frenkel-Poole emission (FPE). For a higher voltage range (-10V to -40V), the increased electric field promotes electron hopping along the threading dislocations in the “bulk” GaN layers, and thus, Variable Range Hopping becomes the main mechanism for the whole temperature range. This work provides an in-depth insight into the leakage conduction mechanisms on vertical GaN-on-Si Schottky barrier Diodes (SBDs) grown by localized epitaxy.

Background: The two-stage technique combining the Endoscopic Retrograde CholangioPancreatography (ERCP) with common bile duct (CBD) clearance carried out before the laparoscopic cholecystectomy represents the most common approach for CBD stones. Over time, different techniques have been proposed to manage cholecysto- choledocholithiasis (CCL) advantageously in one stage. Among these, the laparoendoscopic rendez-vous (LERV) addresses the CCL issue with a laparoscopic cholecystectomy with insertion of a guide wire performed at initial stage of the procedure, followed by the clearance of the bile duct carried out by the endoscopists. The goal of this study was to evaluate the efficacy and safeness of LERV procedure recording results and complications, also making a comparison between our results and current literature. Methods: We reviewed our experience of all consecutive patients with cholecysto-choledocholithiasis managed with LERV between January 2018 and December 2023. LERV success rate, operative time, length of hospital stay, stone recurrence, incidence of endoscopic and surgical complications were analysed. Results: A total of 120 patients underwent LERV in our facilities. We reported a 97% LERV success rate, 1.6% conversion-to-open rate, a median intraoperative time of 122 (range 95-220) min. The median hospital stay was 4 (range 2-38) days. An overall morbidity of 15% was reported (18/120): 15 Clavien-Dindo type 1/2, 2 type 3a and one type 3b. In two cases a re-operation during the hospital stay was necessary. At a median follow-up of 14 months (3-59) five patients experienced stone recurrence requiring redo-ERCP in two cases. Conclusion: LERV offers the significant advantage of a single stage procedure and hospitalisation along with a lower risk of post-ERCP pancreatitis, failed CBD cannulation and complications. Our experience confirms safety and effectiveness of the technique for CCL management.

: Fluoride toxicity has become a global public health concern, and its significant source of exposure is drinking water. This study aimed to determine groundwater fluoride level and assess its related human health risks. Its level was measured from groundwater samples using an ion-selective electrode. The total hazard index was assessed based on the chronic daily oral intake and dermal absorbed dose of groundwater fluoride. Analyses were conducted using ArcGIS and SPSS. This study reported groundwater fluoride ranged from 0.3 mg/L to 38 mg/L, with a mean annual level of 15 mg/L. Groundwater fluoride level above 5 mg/L was reported in 60 % of the water samples. Total hazard index values among sampled locations varied from 0.18 to 22.56. Half (51.5 %) of infants, 85.5 % of children, 82.5 % of adolescents, and 67.5 % of adults had a risk of developing a non-carcinogenic health effect. This study demonstrated that the fluoride level of the groundwater sources was high, and the water was not suitable for drinking, a result that is of special importance for children and adults since they are a hypersensitive subgroup of the population.

The aims of this study are to measure the technical efficiency (TE) of Cambodian household’s rice production and trying to determine its main influencing factors using the stochastic frontier production function. The study utilized primary data collected from 301 rice farmers in three selected districts of Battambang by structured questionnaires. The empirical results indicated the level of household rice output varied according to differences in the efficiency of production processes. The mean TE is 0.34 which means that famers produce 34% of rice at best practice at the current level of production inputs and technology, indicates that rice output has the potential of being increased further by 66% at the same level of inputs if farmers had been technically efficient. Furthermore, between 2013-2015 TE of household’s rice production recorded -14.3% decline rate due to highly affected of drought during dry season of 2015. Moreover, evidence reveals that land, fertilizer, and pesticide are the major influencing input factors of household’s rice production, while disaster, education of household head, family size and other crops’ cultivated area are core influencing factors decreasing TE. Conversely, the main influencing factors increasing TE are irrigated area, number of plot area and sex of household head.

The aims of this study are to measure the technical efficiency (TE) of Cambodian household’s rice production and trying to determine its main influencing factors using the stochastic frontier production function. The study utilized primary data collected from 301 rice farmers in three selected districts of Battambang by structured questionnaires. The empirical results indicated the level of household rice output varied according to differences in the efficiency of the production processes. The mean TE is 0.34 which means that famers produce 34% of rice at best practice at the current level of production inputs and technology, indicates that rice output has the potential of being increased further by 66% at the same level of inputs if farmers had been technically efficient. Furthermore, between 2013-2015, TE of household’s rice production recorded -14.3% decline rate due to highly affected of drought during dry season of 2015. Moreover, evidence reveals that land, fertilizer, and pesticide are the major influencing input factors of household’s rice production, while disaster, education of household head, family size and other crops’ cultivated area are core influencing factors decreasing TE. Conversely, the main influencing factors increasing TE are irrigated area, number of plot area and sex of household head.

The present study aims to measure the technical efficiency and establish core factors effecting rice production in Cambodia. Four-years dataset generated from the central government document “Profile on Economics and Social” of entire 25 provinces between 2012-2015 and the stochastic production frontier model (SFA) was applied. The results indicated that the level of output (quantity) of Cambodian rice production varied according to the different level of capital investment in agricultural machineries, total rice actual harvested area, and technically fertilizers application within provinces. Furthermore, evidence revealed the overall mean efficiency of rice production is 78.4% implies that there is still room to further improve technical efficiency by given the same level of inputs and technology. More importantly, the findings revealed that irrigation, production technique and amount of agricultural supporting staffs are being as the most important influencing factors of rice production’s technical efficiency in Cambodia. In conclusion, present study strongly recommends the development of irrigation systems and good water management practices to be considered and bring into more effective actions by the central government as well as related agencies for improving rice production in Cambodia in addition to capital investment and improving technical skills of supporting staffs and rural farmers.

In recent years, the problem of ecosystem degradation caused by human activities has become increasingly serious. Vegetation restoration is a key means to solve this problem, which has increased. To address the suitability and structural optimization of vegetation restoration in the Loess Plateau, the MaxEnt model was used to quantify the impacts of environmental and human activities on the planting suitability of vegetation restoration species at the raster scale. Three layers of trees, shrubs, and herbs with 12 common vegetation restoration species were selected. The factor index system was constructed by combining climatic, ecological, and socio-economic data, and the MaxEnt model predicted land suitability. It was found that human activities significantly increased the unsuitable planting area. This especially affected Robinia pseudoacacia in the tree layer and Amorpha fruticosa in the shrub layer. Highly suitable and moderately suitable areas were mainly located in sparsely populated areas with close water sources. Through maximum suitability optimization, it was identified that the overall spatial distribution of the three layers in the study area was relatively consistent, and the structural dominance of trees + shrubs + herbs and single herbs in the vertical structure was obvious, which were concentrated in the southwestern and northeastern parts of the study area, respectively. In addition, organic content (OC) and distance from the road to woodland (RW) were the dominant factors affecting land suitability, with a contribution rate of more than 50% and up to 80%. These results provide a scientific basis for optimizing planting structures. They are of significant theoretical and practical significance in guiding vegetation restoration work.

In this work, we explore a the different forms of a new type of modified gravity, namely f(φ) gravity. We construct the Big Rip type for the energy density and the curvature of the universe. We show that dark energy is a result of the transformation of the field φ mass (dark matter) to energy. In addition, we provide that Ω_{m}≈0,050, Ω_{DM}≈0,2, Ω_{DE}≈0,746, is in excellent agreement with observation data. We explore a generalized formalism of braneworld modified gravity. We also construct a new field equations, which generalize the Einstein field equations. We provide a relation between the extra dimension in 3-brane with the vacuum energy density. We show that the energy density of matter depends directly on the number of dimensions. We manage to find the value of the Gauss-Bonnet coupling α=1/4 which is a good agreement with the results in the literature, this correspondence creates a passage between f(R) gravity and Gauss-Bonnet gravity, this comparison leads to a number of bulk dimensions equal to D=10¹²¹+4.

In many application problems, F-transform algorithms are very efficient. In F-transform techniques, we replace the original signal or image with a finite number of weighted averages. The use of weighted average can be naturally explained, e.g., by the fact that this is what we get anyway when we measure the signal. However, most successful applications of F-transform have an additional not-so-easy-to-explain feature: the partition requirement, that the sum of all the related weighting functions is a constant. In this paper, we show that this seemingly difficult-to-explain requirement can also be naturally explained in signal-measuring terms: namely, this requirement can be derived from the natural desire to have all the signal values at different moments of time estimated with the same accuracy.

Litsea martabanica root's antioxidant and AChE activity showed promise as a pesticide detoxification agent in our previous study. In addition to roots, its leaves can help mitigate pesticide exposure, although there is limited scientific evidence supporting their efficacy. However, the use of roots in many countries, such as Thailand, could contribute to environmental degradation, as highland communities traditionally cut down whole trees to obtain them. This study aims to evaluate the antioxidant activity and anti-pesticide potential of water extracts from L. martabanica leaves instead of its roots through in vitro and in vivo investigations. The findings showed that L. martabanica water extracts and fractions demonstrated varied antioxidant activity. The water extract, obtained using traditional extraction methods, was chosen for in vivo experiments. Rats received the extract followed by chlorpyrifos exposure for 16 days. Results indicated reduced acetylcholinesterase activity in chlorpyrifos-exposed rats, while treatment with leaf extract led to increased activity, suggesting its potential as a detoxifying agent. Histopathological examination revealed no liver cell necrosis and showed liver cell regeneration, indicating potential protection against free radical-induced liver damage without affecting rat liver weight or biochemical profiles. Utilizing L. martabanica leaves for healthcare purposes holds promise without negative environmental impact.

In this paper we have defined the effect of bulk viscosity on Quintessence model and scaler field potential as well as on classical field. We have shown the same effect for modified gravity with f(R,T)= R+f(T). In the derivation we have predicted the possibility of time dependent evolution of gravitational constant G and anisotropy.

The compatibility between the de Sitter Swampland conjecture and Ho\v{r}ava-Lifshitz $F(\bar{R})$ theories with a flat FLRW metric is studied. We first study the standard $f(R)$ theories and show that the only way in which the dS conjecture can be made independent of $R$ is by considering a power law of the form $f(R)\sim R^{\gamma}$. The conjecture and the consistency of the theory puts restrictions on $\gamma$ to be greater but close to $1$. For the $F(\bar{R})$ theories described by its two parameters $\lambda$ and $\mu$ we use the equations of motion to construct the function starting with an ansatz for the scale factor in the Jordan frame of the power law form. By doing a conformal transformation on the three metric to the Einstein frame we can obtain an action of gravity plus a scalar filed by relating the parameters of the theory. The non-projectable and projectable cases are studied and the differences are outlined. The $F(\bar{R})$ function obtained consists of terms of the form $\bar{R}^{\gamma}$ with the possibility of having negative power terms. The dS conjecture leads to inequalities for the $\lambda$ parameter, in both versions it gets restricted to be greater but close to $1/3$. For the general case in which $\mu$ and $\lambda$ are considered as independent, the action contains an extra term but we propose that the conjecture is still applicable. Once again the non-projectable and projectable cases are studied. The $F$ function obtained has the same form as before, the consistency of the theory and the dS conjecture lead to a set of inequalities on both parameters that are studied numerically. In all cases $\lambda$ is restricted by $\mu$ around $1/3$ and we obtain $\lambda\to1/3$ if $\mu\to0$. Finally we consider the $f(R)$ limit $\mu,\lambda\to1$ and we obtain consistent results.

Renewable resources gain increasing interest as source for environmentally benign biomaterials, such as drug encapsulation/release compounds, and scaffolds for tissue engineering in regenerative medicine. Being the second largest naturally abundant polymer, the interest in lignin valorization for biomedical utilization is rapidly growing. Depending on resource and isolation procedure, lignin shows specific antioxidant and antimicrobial activity. Today, efforts in research and industry are directed toward lignin utilization as renewable macromolecular building block for the preparation of polymeric drug encapsulation and scaffold materials. Within the last five years, remarkable progress has been made in isolation, functionalization and modification of lignin and lignin-derived compounds. However, literature so far mainly focuses lignin-derived fuels, lubricants and resins. The purpose of this review is to summarize the current state of the art and to highlight the most important results in the field of lignin-based materials for potential use in biomedicine (reported in 2014–2018). Special focus is drawn on lignin-derived nanomaterials for drug encapsulation and release as well as lignin hybrid materials used as scaffolds for guided bone regeneration in stem cell-based therapies.

: In Chile, most tailings impoundments are in Northern and Central Chile, 20% of them are abandoned. Municipal budgets to manage these environmental liabilities are very limited and the use of native and endemic plant species to remove heavy metals from tailings is a low-cost alternative. Ex-situ phytoremediation experiments were conducted over seven months to evaluate the potential of Lycium chilense and Haplopappus foliosus to remove copper and lead from mine tailings. The results indicate that both species can concentrate high levels of both elements and they present removal efficiencies for Cu close to 50%. The best performance was presented by Haplopappus foliosus, accumulating higher concentrations of both metals than Lycium chilense. Also, it presents a bioconcentration over 1.

The Indian meal moth, Plodia interpunctella, poses a significant threat to global agricultural products. Although pheromone-based technologies show promise for P. interpunctella management, limitations like single-sex targeting necessitate exploring complementary strategies. Vegetable-based oils represent a potential alternative, but their efficacy, sex-specificity, and interaction with sex pheromones remain unclear. To answer these questions, we first examined attraction of P. interpunctella female and male adults to ten different vegetable oils, i.e., camellia, corn, olive, peanut, rapeseed, sesame, soybean, sunflower, walnut, and a blended oil (mixture of sunflower seed, rapeseed, soybean, peanut, and sesame oils), in the semi-field conditions. Sesame, olive, and blended oils demonstrated most attractive, capturing significantly more adults compared to other oils. We then evaluated effectiveness of these three attractive oils and their combinations with P. interpunctella sex pheromone in a grain warehouse. Traps baited with these oils captured significantly more females and males compared to control traps without attractants. However, sex pheromone addition did not improve male capture and significantly reduced female capture, suggesting an inhibitory effect. Our findings highlight the potential of blended, olive, or sesame oil trap alone as alternative monitoring and trapping tools for P. interpunctella, delivering novel insights into the development of efficient integrated pest management strategies for stored products.

Functional somatic disorders (FSD) characterized by persistent and disabling physical symptoms are common in adolescents. Diagnostic uncertainty and insufficient illness explanations are proposed perpetuating factors that may constitute barriers for treatment engagement. This study evaluates the impact of manualized assessment and psychoeducation on diagnostic certainty and various clinical outcomes in adolescents with multi-system FSD. Ninety-one adolescents (15-19 years) included in a randomized trial testing group-based therapy (AHEAD) received systematic assessment (4 hrs.) and a subsequent psychiatric consultation (1.5 hrs.). Clinical outcomes included self-reported physical health, symptom severity, illness perception, illness related behavior, and psychological flexibility assessed before and approximately two months after assessment, prior to specialized treatment. Data were analyzed using t-tests. Immediately following assessment 71 (80.7%) adolescents out of 88 reported a higher diagnostic certainty and 74 (84.1%) reported that attending assessment gave them positive expectations for future treatment. A clinically relevant improvement of physical health was not observed at two months but considerable reductions were seen on symptom severity, illness worry, negative illness perceptions, limiting illness behavior and psychological inflexibility. The results underpin the importance of systematic assessment and psychoeducation which may be effective in their own right in specialized treatment of adolescents with severe FSD.

PET imaging with [¹⁸F]F-DOPA has demonstrated high potential for the evaluation and management of pediatric brain gliomas. Manual extraction of PET parameters is time-consuming, lacks reproducibility, and varies with operator experience. In this study, we tested whether a semi-automated image processing framework could overcome these limitations. Pediatric patients with available static and/or dynamic [¹⁸F]F-DOPA PET studies were evaluated retrospectively. We developed a Python software to automate clinical index calculations, including preprocessing to delineate tumor volumes from structural MRI, accounting for lesions with low [¹⁸F]F-DOPA uptake. 73 subjects with treatment-naïve low and high-grade gliomas, who underwent brain MRI within two weeks of [¹⁸vF]F-DOPA PET, were included and analyzed. Static analysis was conducted on all subjects, while dynamic analysis was performed on 32 patients. For 68 subjects, the Intraclass Correlation Coefficient for T/S between manual and ground truth segmentation was 0.91. Using our tool, ICC improved to 0.94. Our method demonstrated good reproducibility in extracting static tumor-to-striatum ratio (p = 0.357), though significant differences were observed in tumor slope (p < 0.05). No significant differences were found in time-to-peak (p = 0.167) and striatum slope (p = 0.36). Our framework aids in analyzing [¹⁸F]F-DOPA PET images of pediatric brain tumors by automating clinical score extraction, simplifying segmentation and Time Activity Curve extraction, reducing user variability, and enhancing reproducibility.

Reducing and time-shifting household energy demand is important for a sustainable transition of energy systems, and dynamic electricity pricing, like real-time pricing (RTP), is a popular instrument to incite households to change energy demand. However, the effect of such products relies on the assumption that dynamic price signals incorporate into everyday routines and rhythms. This paper investigates the flexibility of households’ everyday routines and rhythms. The study provides three insights based on 11 Danish household visits and interviews with electricity customers who are new to RTP. First, the interviews indicated confusion over terminology for dynamic pricing products and low interest in flexible energy demand. Second, everyday practices (already) appeared flexible but for other reasons than energy demand flexibility. Third, energy habits were important for providing meaning to everyday practices. In addition, the study shows that energy flexibility is not just about energy demand, but rather about all the other activities that form routines and rhythms in everyday life. We suggest 1) designing products that reflect ‘natural’ or ‘societal’ daily rhythms, 2) focusing on the engaged households, and 3) being aware that for some households, changes in pricing, including new payment schemes, might put extra pressure on already harried everyday routines.

Probiotics are suggested to improve pig health, nutrient utilisation, performance, and may reduce nitrogen (N) pollution. However, the effectivity of a single-strain might be different from a multi-strain. The study was conducted to investigate the effect of a novel Bacillus multi-strain on nutrient digestibility, energy utilisation, and N retention in weaned piglets. The experiment consisted of a control diet (CD) and a supplemented diet (SD). The probiotic used for SD consisted of B. amyloliquefaciens - 516 and B. subtilis - 541. A total of 8 boars/ treatment were weaned (day 0; 8.5 kg bodyweight). Until day 10, piglets were fed ad libitum and were housed in pairs; from day 11, piglets were fed semi ad libitum and were housed individually. From day 14, faecal and urine were collected twice daily. Piglets were humanely euthanised at day 19 (15.0 kg bodyweight) after which the jejunum, ileum, and colon content were collected. In faeces the apparent total tract digestibility (ATTD) of, amongst others, DM, organic matter (OM), crude protein (CP), non-starch polysaccharides (NSP), and subsequently net energy (NE) were calculated using titanium dioxide as an indigestible marker. In jejunum and ileum, the apparent digestibility of CP was estimated and in ileum the apparent AA digestibility. In urine, N content was measured to determine N retention. The volatile fatty acid (VFA), branched-chain fatty acid (BCFA), and lactic acid content were analysed in colon and faeces. Apparent CP digestibility in jejunum and ileum were not affected by treatment (P&gt;0.05) and no effect was observed on apparent ileal digestibility of AA (P&gt;0.05). Supplementation with the multi-strain probiotic improved ATTD of DM (P=0.01; +1.3%) and OM (P=0.02; +1.2%) and tended to improved ATTD of CP (P=0.10; +2.2%) and NSP (P=0.07; +1.9%). The multi-strain probiotic also improved the NE value (P=0.02; +0.2 MJ/kg DM) and improved N retention (P=0.05; +1.6%). Supplementation did not influence VFA, BCFA, and lactic acid content in the faeces (P&gt;0.05). However, in colon, supplementation did influence lactic acid content (lower; P=0.01) and tended to influence valeric acid content (higher; P=0.09). In conclusion, results from the current study suggests that the multi-strain probiotic has the potential to contribute to improve nutrient efficiency in weaned piglets. More research needs to be done to identify the impact of the improved nutrient utilization on gut health in post-weaned pigs as well as environmental pollution.

We investigate alternative candidates to dark energy that can explain the current state of the universe in the framework of the generalized teleparallel theory of gravity f(T ) where T denotes the torsion scalar. To achieve this, we carried out a series of reconstruction taking into account to the ordinary and entropy-corrected versions of the holographic and new agegraphic dark energy models. These models used as alternative to dark energy in the literature in order describe the current state of our universe. It is remarked that the models reconstructed indicates behaviors like phantom or quintessence models. Furthermore, we also generated the EoS parameters associated to entropy-corrected models and we observed a transition phase between quintessence state and phantom state as showed by recent observational data. We also investigated on the stability theses models and we created the {r − s}. The behavior of certains physical parameters as speed of sound and the Statefinder parameters are compatible with current observational data.

In this work we present a novel steganography algorithm, based on Fractal Transform domain, combined with the principles of Cryptography. The proposed method uses a private key, which will indicate which segment of the image will be taken and encoded with the Fractal Transform, to then insert the secret bits in the transformed coefficients, thus generating the stego image.

The objective of this study was to investigate the umami characteristics of soy sauce using electronic tongue evaluation and amino acid composition and Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) analysis. The soy sauce peptides were isolated from soy sauce using XAD-16 macroporous resin combined with ethanol solution. Results showed that the soy sauce peptide fraction eluted by 60% ethanol (SS-60%) exhibited a prominent umami taste and the umami scores were highly positively correlated with the amino acid nitrogen contents of soy sauces. The umami scores of SS-60% were significantly positively correlated with the contents of free amino acids. Especially, Phe showed the highest positive correlation with the umami scores. In addition, five characteristic ion peaks with m/z at 499, 561, 643, 649, and 855 were identified in the peptide mass fingerprinting. Therefore, this study provides new insights into the umami characteristics for the flavor evaluation and reality identification of soy sauce.

Temperature Cycle Induced Deracemization (TCID) offers a promising approach to obtain enantiopure solids from racemic mixtures. By combining rapid racemization in solution and temperature swings, homochirality is theoretically achieved. Despite theoretical expectations of doubled yields compared to traditional chiral separation methods, such as in Preferential Crystallization, experimental validation remains lacking. We applied TCID to (1-(4-chlorophenyl)-4,4-dimethyl-2-(1H-1,2,4-triazol-1-yl) pentan-3-one) (Cl-TAK), introducing a post-TCID cooling step to enhance yield and a washing step to augment enantiopurity. This refinement yielded an 89.8% mass yield with 99.1% enantiomeric excess in the crystal phase (c.e.e.) within 24 hours on an 8.75g scale, showcasing improved performance with insignificant process duration extension. Additionally, we explored the stochasticity of deracemization, observing the development from low initial crystal enantiomeric excesses(1-6% c.e.e0) at a 2.5 g scale. Kinetic analysis revealed that a 2% c.e.e0 effectively mitigates chiral flipping risks and induction time in our system. Our study underscores the potential for reduced initial c.e.e. to expedite deracemization and presents a straightforward method to optimize yield and purity, facilitating industrial application.

Atmospheric CO2 concentration, temperature and precipitation escalate and it is critical to investigate the agricultural practices best suited to face such new conditions. An important aspect is soil management, which alters soil organic matter content, nutrients and structure, and thus soil/atmosphere interactions and ultimately production. This in vitro study addresses greenhouse gas (GHG) emissions from two long-term soil management experiments in France. One set of soil columns were managed with either grain legume + cover crops or no grain legumes + bare fallow. The other with either plowed or reduced tillage soils. GHG exchange (CO2, N2O) measurements was conducted under different environmental conditions, before and during growth of barley and eventually with three levels of barley biomass cuts (everything removed, cut halfway, intact). The gas exchange was influenced by time and environmental settings, and to a smaller degree management history, with highly variable emissions of N2O. The environmental treatments induced different patterns of effect depending on the management history of the soils. The gas exchange from soil with grain legume was more responsive to the environmental treatments than the rotation without grain legumes. Depending on the history of tillage, the gas exchange responded likewise differently to the induced environment.

There is increased concern that the quality, generalizability, and reproducibility of biomedical research can be influenced by the sex of animals used. We studied the differences between male and female mice in response to invasive pulmonary mucormycosis including susceptibility to infection, host immune reaction, and responses to antifungal therapy. We used diabetic ketoacidotic (DKA) or neutropenic mice infected with either Rhizopus delemar or Mucor circinelloides. The only difference detected was that when DKA mice were infected with M. circinelloides, female mice were more resistant to infection than male mice (median survival time of 5 vs. 2 days for female and male mice, respectively). However, a 100% lethality was detected among infected animals of both sexes. Treatment with either liposomal amphotericin B (L-AMB) or posaconazole (POSA) protected mice from infection and eliminated the difference seen between infected but untreated female and male mice. Treatment with L-AMB consistently outperformed POSA in prolonging survival and reducing tissue fungal burden of DKA and neutropenic mice infected with R. delemar or M. circinelloides, in both mouse sexes. Although little difference was detected in cytokine levels among both sexes, mucormycosis infection in the DKA mouse model induced more inflammatory cytokines/chemokines involved in neutrophil (CXCL1) and macrophage (CXCL2) recruitment vs. uninfected mice. As expected, this inflammatory response was reduced in the neutropenic mouse model. Our studies show that there are few differences between female and male DKA or neutropenic mice infected with mucormycosis with no effect on the outcome of treatment or host immune response.

(R)-1-(4-Amino-3,5-dichlorophenyl)-2-bromoethan-1-ol has been synthesised in 93% enantiomeric excess (ee) by asymmetric reduction of the corresponding ketone catalysed by a ketoreductase and NADPH as the co-factor in DMSO. (S)-N-(2,6-Dichloro-4-(1-hydroxyethyl)phenyl)acetamide has been synthesised in >98% ee by the same system. Both synthons are potential precursors for clenbuterol enantiomers. Clenbuterol is a β₂-agonist used in veterinary treatment of asthma in several countries. The drug is listed on the World Anti-doping Agency’s Prohibited list due to its effect on increased protein synthesis in the body. However, racemic clenbuterol has recently been shown to reduce the risk of Parkinson’s disease. In order to reveal which one (or both) of the enantiomers that cause this effect, the pure enantiomers need to be studied separately. Our biocatalytic approach in order to obtain enantiopure clenbuterol should be applicable to industrial scale.

Cotton (Gossypium spp.) is the most important fibre crop worldwide. Black root rot and Fusarium wilt are two major diseases of cotton caused by soil-borne Berkeleyomyces rouxiae and Fusarium oxysporum f. sp. vasinfectum (Fov), respectively. Phenotyping plant symptoms caused by soil-borne pathogens has always been a challenge. To increase the uniformity of infection, we adapted a seedling screening method that directly uses liquid cultures to inoculate the plant roots and the soil. Four isolates each of B. rouxiae and Fov were collected from cotton fields in Australia and were characterised for virulence on cotton under controlled plant growth conditions. While the identity of all four B. rouxiae isolates were confirmed by multi-loci sequencing, only two of them were found to be pathogenic on cotton, suggesting variability in the ability of isolates of this species to cause disease. The four Fov isolates were phylogenetically clustered together with the other Australian Fov isolates and displayed both external and internal symptoms characteristic of Fusarium wilt on cotton plants. Furthermore, the isolates appeared to induce varied levels of plant disease severity indicating differences in their virulence on cotton. To contrast the virulence of the Fov isolates, four putatively non-pathogenic Fusarium oxysporum (Fo) isolates collected from cotton seedlings exhibiting atypical wilt symptoms were assessed for their ability to colonise cotton host. Despite the absence of Secreted In Xylem genes (SIX6, SIX11, SIX13 and SIX14) characteristic of Fov, all four Fo isolates retained the ability to colonise cotton and induce wilt symptoms. This suggests that slightly virulent strains of Fo may contribute to the overall occurrence of Fusarium wilt in cotton fields. Findings from this study will allow better distinction to be made between plant pathogens and endophytes and allow fungal effectors underpinning pathogenicity to be explored.

Here are given tight probabilistic inequalities that provide nearly best estimates for the Csiszar's f-divergence. These use the right and left psi -Hilfer fractional derivatives of the directing function f. Csiszar's f- divergence or the so called Csiszar's discrimination is used as a measure of dependence between two random variables which is a very essential aspect of stochastics, we apply our results there. The Csiszar's discrimination is the most important and general measure for the comparison between two probability measures. We give also other applications.

Background: Misconceptions and knowledge gaps about antibiotic use contribute to inappropriate antibiotic use and antimicrobial resistance. Aim: Identifying and prioritizing misconceptions and knowledge gaps about antibiotic use from a healthcare professionals’ perspective. Methods: A modified Delphi study of two rounds with an expert meeting. A literature search was conducted to create statements about misconceptions and knowledge gaps about antibiotic use. These were rated by healthcare professionals from five EU countries representing general practice, out-of-hour services, nursing homes, and pharmacies. Consensus was achieved if ≥80% of the participants rated 4+ on a five-point Likert scale during the second Delphi round. Results. In total, 44 misconceptions were identified through the literature search within four themes: 1) antimicrobial resistance in general, 2) use of antibiotics in general, 3) use of antibiotics for respiratory tract infections, and 4) use of antibiotics for urinary tract infections. Consensus was reached for more than half of the statements within each setting. Conclusions. Experts from different settings and nationalities acknowledge that multiple misconceptions and knowledge gaps can contribute to inappropriate use of antibiotics in the community. These results provide valuable information to use in educational campaigns for patients and healthcare professionals to improve the use of antibiotics.

We present an overview over eight brightly luminescent Cu(I) dimers of the type Cu2X2(PN)3 with X = Cl, Br, I and P^N = 2-diphenylphosphino-pyridine (Ph2Ppy), 2-diphenylphosphino-pyrimidine (Ph2Ppym), 1-diphenylphosphino-isoquinoline (Ph2Piqn) including three new crystal structures (Cu2Br2(Ph2Ppy)3, 1-Br, Cu2I2(Ph2Ppym)3, 2-I, and Cu2I2(Ph2Piqn)3, 3-I). However, we mainly focus on their photo-luminescence properties. All compounds exhibit combined thermally activated delayed fluorescence (TADF) and phosphorescence at ambient temperature. Emission color, decay time, and quantum yield varies over large ranges. For deeper characterization, we select Cu2I2(Ph2Ppy)3, 1-I, showing a quantum yield of 81 %. DFT and SOC-TDDFT calculations provide insight into the electronic structures of the singlet S1 and triplet T1 states. Both stem from metal+iodide-to-ligand charge transfer transitions. Evaluation of the emission decay dynamics, measured from 1.2 ≤ T ≤ 300 K, gives ∆E(S1-T1) = 380 cm-1 (47 meV), a transition rate of k(S1→S0) = 2.25×106 s-1 (445 ns), T1 zero-field splittings, transition rates from the triplet substates, and spin-lattice relaxation times. We also discuss the interplay of S1-TADF and T1-phosphorescence. The combined emission paths shorten the overall decay time. For OLED applications, utilization of both singlet and triplet harvesting can be highly favorable for improvement of the device performance.

Revealing the spatial distribution mechanism of the coupling effect between soil water and salt is essential for managing saline-alkali farmland. This study utilized the multifractal method to analyze soil water and salt under varying water content levels in arid saline-alkali farmland. Soil samples were collected on the second (S1), fifth (S2), eighth (S3), eleventh (S4), and fourteenth (S5) days after a rainfall event. The findings showed that a significant decrease in soil water content, contrasting with an increase in soil salt content throughout the soil layers post-rainfall. As water content decreased, the spatial variability of soil water initially increased from S1-3 and then decreased, while the spatial variability of soil salt decreased. The spatial distribution between soil water and salt exhibited a high correlation at S3-4 (with relative water content of soil ranging from 0.52 to 0.75) due to their coupling effect. However, soil salt was unevenly leached by rainfall at high water content levels (S1-2) and precipitated at low water content levels (S5), resulting in low spatial variability correlations between soil water and salt. This study elucidated the coupling process of soil water and salt, identifying their spatiotemporal distribution mechanism in dryland agricultural areas.

The hydrocarbon generation potential of Chia Gara strata and their genetic link with produced oils from the Zagros basin are still not comprehensively investigated. Forty-seven rock samples from the Tithonian–Berriasian interval were subjected to geochemical analyses to infer organic matter enrichment, hydrocarbon potential, thermal maturity, and timing for hydrocarbon generation/expulsion and their implications regarding upcoming petroleum explorations in the Zagros basin. The results showed that the Chia Gara rock samples have fair to very-good generation potential, as confirmed by higher total organic carbon (TOC=0.68–3.95 wt%) and Rock-Eval (S1+S2=3.37–8.52 mg HC/g rock). The hydrogen index (HI=171–462) and Rock-Eval Tmax over 430 °C support the presence of Types II and mixed Types II/III kerogen. These results confirm the high generation potential of the Chia Gara Formation in the study region. 1D basin models of the KK–109 well show that over 55% of kerogens were converted into oil in the Cretaceous (77–67 Ma). Expulsion started from the Miocene until now (22–0 Ma), consistent with 0.71–0.80 of modeled Easy%Ro and 55–80 %TR. Consequently, this project confirms the potential oil expulsion from the Chia Gara Formation, which can be a resource for upcoming hydrocarbon investigation in the Zagros basin, Iraq.

Yerba maté, an herbal tea derived from Ilex paraguariensis, has previously been reported to be protective against obesity-related and other cardiometabolic disorders. Using high-resolution respirometry and reverse-phase high-performance liquid chromatography, the effects of four weeks of yerba maté consumption on mitochondrial efficiency and cellular redox status in skeletal muscle, adipose, and liver, tissues highly relevant to whole body metabolism, were explored in healthy adult mice. Yerba maté treatment increased mitochondrial oxygen consumption in adipose, but not in other tissues examined. Yerba maté increased ATP concentration in skeletal muscle and decreased ATP concentration in adipose. Combined with observed changes in oxygen consumption, these data yielded a significantly higher ATP:O2, a measure of mitochondrial efficiency, in muscle and a significantly lower ATP:O2 in adipose, which were consistent with yerba maté-induced weight loss. Yerba maté treatment also altered the hepatic glutathione (GSH)/glutathione disulfide (GSSG) redox potential to a more reduced redox state, suggesting potential protective effects against oxidative stress and preservation of cellular function. Together, these data indicate beneficial, tissue-specific effects of yerba maté supplementation on mitochondrial bioenergetics and redox states in healthy mice that are protective against obesity.

The -blocker (S)-practolol ((S)-N-(4-(2-hydroxy (isopropylamino)propoxy)phenyl)acetamide) was synthesized with 96% enantiomeric excess (ee) from the chlorohydrin (R)-N-(4-(3-chloro-2 hydroxypropoxy)phenyl)acetamide, which was produced in 97% ee and with 27% yield. Racemic building block 1-((1H-indol-4-yl)oxy)-3-chloropropan-2-ol for the -blocker pindolol was produced in 53% yield and (R)-1-((1H-indol-4-yl)oxy)-3-chloropropan-2-ol was produced in 92% ee. The chlorohydrin 7-(3-chloro-2-hydroxypropoxy)-3,4-dihydroquinolin-2(1H)-one, a building block for a derivative of carteolol was produced in 77% yield. (R)-7-(3-chloro-2-hydroxypropoxy)-3,4-dihydroquinolin-2(1H)-one was obtained in 96% ee. The S-enantiomer of this carteolol derivative was produced in 97% ee in 87% yield. Racemic building block 5-(3-chloro-2-hydroxypropoxy)- 3,4-dihydroquinolin-2(1H)-one, building block for the drug carteolol was also produced in 53% yield, with 99% ee of the R-chlorohydrin (R)-5-(3-chloro-2-hydroxypropoxy)-3,4-dihydroquinolin-2(1H)-one. The yield of all four chlorohydrins increased by use of catalytic amounts of base. The reason for this was found to be less formation of the dimeric by-products compared to use of higher concentration of the base. An overall reduction of reagents and reaction time was also obtained compared to our previous reported data of similar compounds. The enantiomers of the chlorohydrin building blocks were obtained by kinetic resolution of the racemate in transesterification reactions catalyzed by Candida antarctica Lipase B (CALB) from SyncoZymes Co, Shanghai, China. Optical rotations confirmed the absolute configuration of the enantiopure drugs.

Dental polymers are often advertised and selected for use in restorations based upon the flexural strength of prefabricated discs, which may not accurately reflect their performance in dental applications. The objectives of this study were, therefore, to determine whether the three-point bending (3PB) test for flexural strength would be predictive of the “crunch-the-crown” CTC test for the failure load. Three brands of polymers (Trilor, Juvora, and Pekkton) were fabricated into rectangular bars and fully contoured crowns (10 specimens of each polymer brand, 30 specimens of each shape). Bars were tested in 3PB to determine flexural strength, and crowns were CTC tested to determine failure load after luting to resin abutments. Statistical significance was evaluated by one-way ANOVA ( = 0.05) and Pearson’s correlation coefficient. The fracture mechanisms were characterized by scanning electron microscopy (SEM). There were significant differences (p < 0.05) in the mean crown failure loads (Trilor [7,033 N] > Juvora [5,217 N] > Pekkton [3,023 N]) and mean flexural strengths of the bars (Trilor [468 MPa] > Juvora [197 MPa] = Pekkton [192 MPa]). There were no correlations between flexural strength and failure load. The mode of crown fracture was different between the polymers, and included deformation (Juvora), ductile-to-brittle fracture (Pekkton), and a combination of cracks and deformation (Trilor). The flexural strength was not correlated with the corresponding crown failure load. Dental practitioners should not rely on the value of flexural strength obtained from the three-point bending test, as advertised from the manufacturer, to predict the performance of polymeric crowns.

For many engineering applications it is sufficient to use the concept of simple materials. However, higher gradients of the kinematic variables are taken into account to model materials with internal length scales as well as to describe localization effects using gradient theories in finite plasticity or fluid mechanics. In many approaches length scale parameter have been introduced that are related to a specific micro structure. An alternative approach is possible, if a thermodynamically consistent framework is used for material modelling as shown in the present contribution. However, even if sophisticated and thermodynamically consistent material models can be established there are still not yet standard experiments to determine higher order material constants. In order to contribute to this ongoing discussion system identification based on the method of self-adaptive filtering is proposed in this paper. To evaluate the effectiveness of this approach it has been applied to second-order gradient materials considering longitudinal vibrations. Based on thermodynamically consistent models that have been solved numerically it has been possible to prove that system identification based on self-adaptive filtering can be used effectively for both narrow-band and broadband signals in the field of second-order gradient materials. It has also been found that the differences identified for simple materials and gradient materials allow for condition monitoring and detection of gradient effects in the material behavior.

In bone tissue engineering, ceramics have been the choice due to their excellent biological properties. But the paradigm changed with the discovery of bioactive glasses (BGs) in 1969 by Larry Hench and co-workers, due to their ability to bond to living tissues through the formation of an interfacial bone-like hydroxyapatite layer when the bioglass was put in contact with biological fluids in vivo. Among a number of tested compositions, the one exhibiting the highest bioactivity index is the well-known trademarked 45S5 Bioglass®. The topic received increasing attention particularly after 1985 when this material entered in the market of biomedical devices, inspiring many other investigations aiming at further exploring the in vitro and in vivo performances of this BG, or developing other related BG compositions. The research efforts gradually revealed a number of shortcomings of 45S5 Bioglass®, mostly derived from its high sodium content, initially intended to decrease the melting temperature and accelerating the degradation of the silicate network over time. But the extensive release of sodium from 45S5 Bioglass® in the biological fluids creates a high pH cytotoxic environment. Other serious drawbacks include a fast degradation rate, and a poor sintering ability, which hinders the reliable fabrication of porous scaffolds. Therefore, sol-gel was regarded as an attractive alternative to prepare alkali-free BG compositions. The process uses inorganic and/or organic precursors, which undergo hydrolysis and condensation at room-temperature, being less costly. When properly conducted, the sol-gel process might result in amorphous structures with all the components intimately mixed at the atomic scale. Moreover, developing new better performing materials for bone tissue engineering is a growing concern, as the ageing of the world’s population leads to lower bone density and osteoporosis. This work describes the sol-gel synthesis of a novel quaternary silicate-based BG with the composition 60 SiO2 – 34 CaO – 4 MgO – 2 P2O5 (mol%) was prepared using acidified distilled water as single solvent. By controlling the kinetics of the hydrolysis and condensation steps, an amorphous glass structure could be obtained. The results of XRD of samples calcined within the temperature range from 600-900 ºC demonstrated that amorphous nature was maintained until 800 ºC, followed by partial crystallization at 900 ºC. The specific surface area, an important factor in osteoconduction, was also evaluated over different temperatures, ranging from 160.6 ± 0.8 m2/g at 600 ºC down to 2.2 ± 0.1 m2/g at 900 ºC, being accompanied consistent changes in average pore size and agreeing pore size distribution. The immersion of the BG particles in simulated body fluid (SBF) led to the formation of an extensive apatite layer on its surface. These overall results indicate the proposed material is very promising for biomedical applications in bone regeneration and tissue engineering.

The as-received commercial Inconel 718 material was solid solution heat treated (ST), cold rolled (CR), and precipitation hardened (PH) to investigate the effects of deformation on tensile properties, hardness, and texture. Three sets of specimens (0%, 20% and 50% CR) were STed at 1100 C/1h, CR and aged (720 °C/8 h + 650 °C/8 h) for the analysis. Ultimate tensile strength (UTS), 0.2% yield strength (YS) and elongation of 50% deformed condition were 1645 MPa, 1512 MPa, and 3.8 %, respectively. The 20 % deformation resulted in a balanced UTS (1348 MPa), YS (1202 MPa) and elongation (11%). Contributions of precipitation hardening to the strength was decreasing, while contribution of CR increases with increasing percentage of deformation. Correspondingly, the size and quantities of  decreased with increasing deformation level. In CR specimens, a high density of nano/micro twins were generated with the twin planes oriented perpendicular to the RD-ND surface. The preferred rotation of the crystals generated the gradient of orientation and internal features of the large austenitic grains. The cross-slip of screw dislocations induced a complete β-fibre, consisting of {110}, {112}, and{123}, with doubled intensity at higher deformation. In addition, the specimens tended to be highly susceptible to the twinning-induced orientation emerged by a predominant ⫽ND. An incomplete but intense α-fibre clustered between {110} and {110} was characterized in the as-deformed condition. Besides achieving highest strength, the current work demonstrates the effects of CR on the material strength without the complex influences of  precipitate.

The intake of omega-3 polyunsaturated fatty acids (PUFA) of the average consumer is generally low and products like fish oils high in omega-3 PUFA have become a popular dietary supplement. There is a need for more sources of omega-3 PUFA to cover the increasing demand. This study investigated whether livers from different lean fish species could be a potential new source of oils rich in omega-3 PUFA. The seasonal variation in lipid content, fatty acid composition, peroxide value and free fatty acid content of livers from cod, hake, ling, coalfish and monkfish was determined and the effect of storage conditions on the fishing vessel (ice vs frozen) was studied. Generally, the lipid content and composition of the livers from the five fish species varied similarly during the two years of sampling period with significantly lower values in spring (March, April) and higher values in fall (November, October). Storage conditions were found to have no significant effect on the quality and oil composition. Monkfish livers were less suitable for production of omega-3 oil due to their lower lipid and EPA content and higher FFA levels. Coalfish had higher fluctuations in oil composition during sampling period, which potentially makes a standardised quality difficult to obtain. Cod, hake and ling were the most suitable species for fish liver oil production.

Retrospective information about the climate system and plant ecophysiology are key inputs in climate and Earth system modelling. Dendrochronology provides such information with large spatiotemporal coverage, and stable carbon isotope (¹³C/¹²C) analysis across tree-ring series is among the most advanced dendrochronological tools. For the past seventy years, this analysis was performed on whole molecules, and, to this day, ¹³C/¹²C variation is attributed to ¹³C discrimination during CO₂ diffusion into leaves and assimilation by rubisco. By contrast, ¹³C discrimination by post-rubisco processes is presumed constant. Here, recently reported results on the first dataset of intramolecular ¹³C discrimination in tree rings were synthesised by variance component analysis. The emerging picture is not consistent with the classical (DR-discrimination-centred) concepts and practices of carbon-isotope dendrochronology. Specifically, leaf and stem post-rubisco discrimination each account for more variation in the data than diffusion-rubisco discrimination, i.e., post-rubisco discrimination is not constant. Furthermore, diffusion-rubisco discrimination is used widely as proxy of leaf intrinsic water-use efficiency (iWUE), a key determinant in the responses of global biogeochemical cycles to climate change. However, since diffusion-rubisco discrimination is a small component of the total data variance, whole-molecule analysis yields confounded iWUE estimates, yet intramolecular analysis will likely offer solutions. Lastly, all currently observed ¹³C/¹²C-climate relationships are attributed to diffusion-rubisco discrimination. However, here, relationships with temperature and radiation derive from leaf-level post-rubisco discrimination while relationships with precipitation derive from stem-level post-rubisco discrimination. That said, advances in mass spectrometry may soon make intramolecular ¹³C/¹²C analysis broadly available taking carbon-isotope dendrochronology to the next level.

A Friedmann-Lemaitre-Robertson-Walker space-time model with all curvatures k=0,±1 is explored in f(R,T) gravity. The solutions are obtained via the parametrization of the scale factor that leads to a model transiting from a decelerated universe to an accelerating one. The physical features of the model are discussed and analysed.

We analyze the behavior of relativistic spherical objects within the context of modified $f(R,T)$ gravity considering Tolman VI spacetime, where gravitational lagrangian is a function of Ricci scalar(R) and trace of energy momentum tensor(T) i.e,$ f(R,T)= R+ 2\beta T$, for some arbitrary constant $\beta$. For developing our model, we have chosen $\pounds_{m} = -p$, where $ \pounds_{m}$ represents matter lagrangian. For this investigation, we have chosen three compact stars namely PSR J1614-2230 [Mass=(1.97$\pm$ 0.4)M$_\odot$; Radius= 9.69$_{-0.02} ^{+0.02}$ Km] ,Vela X-1 [Mass=(1.77$\pm$ 0.08)M$_\odot$; Radius= 9.560$_{-0.08} ^{+0.08}$ Km] and 4U 1538-52 [Mass=(9.69)M$_\odot$; Radius= 1.97 Km]. In this theory the equation of pressure isotropy is identical to standard Einstein's theory. So all known metric potential solving Einstein's equations are also valid here. In this paper, we have investigated the effort of coupling parameter ($\beta$) on the local matter distribution. Sound of speed and adiabatic index are higher with grater values of $\beta$ while on contrary mass function and gravitational redshift are lower with higher values of $\beta$ . For supporting the theoretical results, graphical representation are also employed to analyze the physical viability of the compact stars.

Qatar and other Gulf States have a diverse range of marine vegetation that is adapted to the stressful environmental conditions of seawater. The industrial wastewater produced by oil and gas activities adds further detrimental conditions for marine aquatic photosynthetic organ-isms on the Qatari coastlines. Thus, these organisms experience severe stress from both seawater and industrial wastewater. This review discusses the biodiversity in seawater around Qatar, as well as remediation methods and metabolic pathways to reduce the negative impacts of heavy metals and petroleum hydrocarbons produced during these activities. These methods include phyto-stabilization phyto-accumulation, phyto-volatilization, and phyto-degradation. Phy-to-degradation in particular is discussed in detail, including metabolic pathways such as alkane and aromatic-compound degradation pathways. The role of microorganisms that are adjacent to or associated with these aquatic marine organisms is discussed, including rhizosphere biodeg-radation. In this type of biodegradation, exudates are released by plant roots and supply nutrients to microorganisms in the rhizosphere, which enhances their ability to degrade organic pollutants. Special attention is paid to mangrove forests and their roles in remediating shores polluted by industrial wastewater. Seagrasses (Halodule uninervis, Halophila ovalis, and Thalassia hemprichii) and seaweeds (Chlorophyta, Phaeophyta, and Rhodophyta) around the peninsula of Qatar are also discussed.

In this work, we introduce a new concepts for $\alpha$-type $F$-Suzuki contraction and $\alpha$-type $F$-weak-Suzuki contraction in the context of $b$-metric spaces. Compared to the $\alpha$-type $F$-contraction and $F$-Suzuki contraction mappings, these contractions are essentially weaker. For these type of contraction mappings, sufficient conditions are established for the fixed point's existence and uniqueness in $b$-metric spaces. As a result, the findings encompass several generalizations. To show the usability of our obtained results, we provide a supportive example and an application to a non-linear differential equation with fractional order.

Twice-exceptional learners face a unique set of challenges arising from the intersection of extraordinary talent and disability. Neurobiology research has the capacity to complement pedagogical research and provide support for twice-exceptional learners. Very few studies have attempted to specifically address the neurobiological underpinnings of twice-exceptionality. However, neurobiologists have built a broad base of knowledge in nervous system function spanning from the level of neural circuits to the molecular basis of behavior. It is known that distinct neural circuits mediate different neural functions, which suggests that 2e learning may result from enhancement in one circuit and disruption in another. Neural circuits are known to adapt and change in response to experience, a cellular process known as neuroplasticity. Plasticity is controlled by a bidirectional connection between the synapse, where neural signals are received, and the nucleus, where regulated gene expression can return to alter synaptic function. Complex molecular mechanisms compose this connection in distinct neural circuits, and genetic alterations in these mechanisms are associated with both memory enhancements and psychiatric disorder. Understanding the consequences of these changes at the molecular, cellular, and circuit levels will provide critical insights into the neurobiological bases of twice-exceptional learning.

By using a systems biological perspective and available literature on human social interaction, grouping, and cohesiveness, a new coherent model is proposed that integrates existing social integration and neurobiological research into a theoretical neurobiological framework of personality and social interaction. This model allows for the coherent analysis of complex social systems and interactions within them, and proposes a framework for estimating group cohesiveness and evaluating group structures in order to build and organize optimized social groups. This „Neurobiological-Associative“ model proposes two primary feedback loops, with environmental conditioning (learning) being sorted into an associative model that modulates interaction with the social environment, and which impacts the second feedback loop involving the individuals' neurobiological capacity. In this paper, the concept of neurobiological capacity is developed and based upon contemporary research on intelligence, personality, and social behavior with a focus on the oxytocin, serotonin, and dopamine systems. The basis of social exclusion and group structure is thus, expressed in the very most simple terms, neurobiological compatibility and risk assessment modulated by an internal associative model.

Decoherence with recurrences appear in the dynamics of the one-body density matrix of an $F = 1$ spinor Bose-Einstein condensate, initially prepared in coherent states, in the presence of an external uniform magnetic field and within the single mode approximation. The phenomenon emerges as a many-body effect of the interplay of the quadratic Zeeman effect, that breaks the rotational symmetry, and the spin-spin interactions. By performing full quantum diagonalizations very accurate time evolution of large condensates are analyzed, leading to heuristic analytic expressions for the time dependence of the density matrix, in the weak and strong interacting regimes. We are able to find accurate analytical expressions for both the decoherence and the recurrence times, in terms of the number of atoms and strength parameters, that show remarkable differences depending on the strength of the spin-spin interactions. We discuss the nature of these limits in the light of the thermodynamic limit.

The advances mobile communications has seen in recent years has rendered the radio spectrum a limited and, hence, an expensive resource. Therefore, technologies that support unlicensed access to spectrum are needed. Therefore, the adoption of novel modulation schemes becomes of utmost importance to obtain better spectral-localization and reduce the OOBE (\textit{Out of Band Emission}) inherent to OFDM (\textit{Orthogonal Frequency Division Multiplexing}) and, consequently, mitigating the interference between secondary (\textit{unlicensed}) and primary users. In this scenario, we assess the gain in the bit error probability using f-OFDM (\textit{filtered-OFDM}) in MIMO systems, both used in the 5G RANGE project.

Amplitude modulation (AM) is a characteristic feature of wind farm noise and has the potential to contribute to annoyance and sleep disturbance. This study aimed to develop an AM detection method using a random forest approach. The method was developed and validated on 6,000 10-second samples of wind farm noise manually classified by a scorer via a listening experiment. Comparison between the random forest method and other widely-used methods showed that the proposed method consistently demonstrated superior performance. This study also found that a combination of low-frequency content features and other unique characteristics of wind farm noise play an important role in enhancing AM detection performance. Taken together, these findings support that using machine learning-based detection of AM is well suited and effective for in-depth exploration of large wind farm noise data sets for potential legislative and research purposes.

Positioning is an essential aspect of robot navigation, and visual odometry an important technique for continuous updating the internal information about robot position, especially indoors without GPS. Visual odometry is using one or more cameras to find visual clues and estimate robot movements in 3D relatively. Recent progress has been made, especially with fully integrated systems such as the RealSense T265 from Intel, which is the focus of this article. We compare between each other three visual odometry systems and one wheel odometry, on a ground robot. We do so in 8 scenarios, varying the speed, the number of visual features, and with or without humans walking in the field of view. We continuously measure the position error in translation and rotation thanks to a ground truth positioning system. Our result show that all odometry systems are challenged, but in different ways. In average, ORB-SLAM2 has the poorer results, while the RealSense T265 and the Zed Mini have comparable performance. In conclusion, a single odometry system might still not be sufficient, so using multiple instances and sensor fusion approaches are necessary while waiting for additional research and further improved products.

This article explores the significant parallels between big tobacco companies and major social networking sites regarding their influence on public health and society. While acknowledging the fundamental differences in their products and services, the paper scrutinises both industries through five primary lenses: addiction, misinformation, lack of regulation, harm to public health, and youth targeting. Both industries exhibit addictive characteristics, have faced criticism for the spread of misinformation, operate with limited regulation and transparency, and have raised concerns about targeting young demographics. Moreover, the potential harm to public health is a significant concern, with tobacco leading to well-established physical health issues. At the same time, excessive social media use has been linked to psychological harm, particularly among young users. The comparison underscores the necessity for greater regulation and oversight of social media companies, highlighting the urgent need for more comprehensive policies to mitigate potential harm and safeguard public health in the digital age.

Anti-Müllerian hormone (AMH) has been proposed as biomarker for fertility in cattle, yet this associative relationship appears to be influenced by heat stress. Objective was to test serum AMH and AMH-related single nucleotide polymorphisms (SNPs) as markers potentially predictive of reproductive traits in heat-stressed dairy cows. The study included 300 Holstein cows that were genotyped using BovineSNP50 (54,000 SNP) after blood samples were collected and DNA extracted. A genome wide association study was then executed. Nine intragenic SNPs within the pathways that influence the AMH gene were found important with multiple comparisons adjustment test (p&lt;1.09x10-6). A further validation study was performed in an independent Holstein cattle population, which was divided into moderate (MH; n=152) and severe heat-stressed (SH; n=128) groups, and subjected to a summer reproductive management program. Serum AMH was confirmed as a predictor of fertility measures (p&lt;0.05) in MH but not in SH group. Cows were genotyped using the TaqMan allelic discrimination method and qPCR, which revealed four SNPs as predictive markers for serum AMH (p&lt;0.01), reproductive traits (p&lt;0.01) and physiological variables (p&lt;0.05). These SNPs were in the genes AMH, IGFBP1, LGR5 and TLR4. In conclusion, both serum AMH concentrations and AMH-related SNPs appear to be associated with fertility traits in dairy cows managed during summer.

Abstract: Theoretical and non-dimensional investigations have been performed to study the vibration control potential of approaches that can be based on viscoelastic but also on endochronic elements. The latter are known from the endochronic theory of plasticity and provide the possibility to establish rate-independent schemes for vibration control. The main question that has to be answered is: Can rate-independent damping be efficiently used to reduce mechanical vibrations? To answer this question non-dimensional models for dynamical systems are derived and analyzed numerically in time-domain as well as in frequency-domain. The results are used to compare the performance of an optimally tuned endochronic absorber to the performance of an optimally tuned dynamic absorber with viscoelastic damping. Based on a novel closed form representation for non-linear systems with endochronic elements, it has been possible to prove that rate-independent control of vibration results in an overall control profit that is close to the control profit obtained by the application of well-established approaches. It has also been found that the new concept is advantageous if anti-resonances have to be considered in broadband vibration control. Based on these novel findings, a practical realization in the context of active vibration control is proposed in which the rate-independent control law is implemented on an appropriate signal processing hardware.

The structures of a number of dimers of sulphur dioxide and ozone have been optimized by means of a series of ab initio calculations. The dimer species have been classified as either genuine energy minima or transition states of first or higher order, and the most probable structures consistent with the experimental data have been confirmed. The molecular orbitals engaged in the interactions resulting in adduct formation have been identified and relations between the orbitals of the dimers of the valence isoelectronic monomer species examined. The vibrational spectra of the most probable structures have been computed, and compared with those reported in the literature, particularly with spectra observed in cryogenic matrices. The calculations have been extended to predict the properties of a number of possible heterodimers formed between sulphur dioxide and ozone.

In this paper, we classify the function space of all real-valued functions on R denoted as F(R,R) into 28 distinct blocks. Each block contains elements that share common features in terms of the cardinality of their sets of continuity and differentiability. Alongside this classification, we introduce the concept of the Connection, which reveals a special relationship structure between four well-known real-valued functions in real analysis: the Cantor function, Dirichlet function, the Thomae function, and the Weierstrass function. Despite the significance of this field, several perspectives remain unexplored.

A locally-rotationally-symmetric Bianchi-I model filled with strange quark matter (SQM) is explored in f(R, T) gravity. We take f(R, T) = R + 2 f(T) = R + 2λT, where R is the Ricci scalar, T is the trace of energy-momentum tensor and λ is an arbitrary constant. Exact solutions are obtained by assuming that the expansion scalar is proportional to the shear scalar. This yields a constant value for the deceleration parameter, q = 2, which corresponds to the decelerated phase of the universe. The model is found to be physically viable for λ < −1. SQM during early evolution mimics ultra-relativistic radiation whereas at late times, it behaves as dust, quintessence or even the cosmological constant depending on the value of λ. The effective matter acts as a stiff fluid irrespective of the matter content and of the f(R, T) terms. The model is shear free at late times but remains anisotropic throughout the evolution. In the absence of the f(R, T) terms, SQM accelerates the universe. In the specific case when SQM vanishes at late times, the effect of f(R, T) is to accelerate the universe. The model admits the possibility that SQM could be an alternative to dark energy.

We obtain exact solutions to the field equations for 5 dimensional LRS Bianchi type-I spacetime in $f(R,T)$ theory of gravity where specifically the following three cases are considered: (i) $f(R,T)=\mu(R+T)$, (ii) $f(R,T)=R \mu + R T \mu^2$ and (iii) $f(R,T)=R+\mu R^2+\mu T$ where $R$ and $T$ respectively the Ricci scalar and trace of the energy-momentum tensor. It is found that the equation of state (EOS) parameter $w$ is governed by the parameter $\mu$ involved in the $f(R,T)$ expressions. We fine-tune the parameter $\mu$ to obtain effect of phantom energy in the model, however we also restrict this parameter to obtain a stable model of the universe. It is noted that the model isotropizes at finite cosmic time.

In this work, we study the existence of strange star in the background of f(T,T) gravity in the Einstein spacetime geometry, where T is the torsion tensor and T is the trace of the energy-momentum tensor. The equations of motion are derived for anisotropic pressure within the spherically symmetric strange star. We explore the physical features like energy conditions, mass-radius relations, modified TOV equations, principal of causality, adiabatic index, redshift and stability analysis of our model. These features are realistic and appealing to further investigation of properties of compact objects in f(T,T) gravity as well as their observational signatures.

While many practitioners and experts understand the risks associated with low urban tree diversity, they often lack the ability to rectify issues they encounter on their own. The current system of tree production and procurement is complex – shaped by market pressures, nursery and site constraints, local governance, and differing professional objectives among those who grow, specify, and plant trees. To understand this complexity as well as constraints to- and opportunities for increasing urban tree diversity, we conducted a series of focus groups comprised of nursery growers, landscape architects, and urban foresters. Our results highlight a significant list of considerations and constraints to diversity (both shared among green industries and some specific to growers or purchasers). More importantly, in discussing our findings we outline actionable strategies for increasing urban tree diversity.

In order to achieve its carbon peak and neutrality targets, a high proportion of distributed power sources are connected to the distribution network in China, which greatly increases the risk of distribution network operation. Aiming at the above problems, this paper proposes an active distribution network risk planning model based on multi-source data from carbon capture and power internet of things, and conducts exceeding testing of distribution network based on the stochastic load flow algorithm with semi-invariant and level expansion, calculates the semi-invariant of each order of node state vectors and branch current vectors, and then utilizes the Gram-Charlier level expansion to obtain the exceeding probability density function and probability distribution function of the node voltages and line powers of the distribution network. The probability density function and probability distribution function of the exceeding are obtained using the Gram-Charlier series expansion. Combined with multi-source data, the active distribution network with integrated energy system considering carbon capture is modeled. According to the risk scenario of the distribution network, the nonconvex constraints in the model are simplified by the second-order cone relaxation, and the optimal planning scheme of the distribution network is solved by combining the gurobi solver with the risk index as the first-level objective and the economic benefit as the second-level objective. The simulation results of a coupled network consisting of a 39-node distribution network and an 11-node transportation network verify the effectiveness of the proposed model.

Developmental hazard evaluation is an important part of assessing chemical risks during pregnancy. Toxicological outcomes from prenatal testing in pregnant animals result from complex chemical-biological interactions, and while New Approach Methods (NAMs) based on in vitro bioactivity profiles of human cells offer promising alternatives to animal testing, most of these assays lack cellular positional information, physical constraints, and regional organization of the intact embryo. Here, we engineered a fully computable model of the embryonic disc in the compucell3d.org modeling environment to simulate epithelial-mesenchymal transition of epiblast cells and self-organization of mesodermal domains (chordamesoderm, paraxial, lateral plate, posterior/extraembryonic). Cell fate in the model is determined by an autonomous homeobox (HOX) clock driven by morphogenetic signals (e.g., FGF, WNT, ATRA, CDX). Executing the model renders a quantitative cell-level computation of mesodermal subpopulations and consequences of perturbation based on known embryogeny. For example, synthetic perturbation of the control network rendered altered phenotypes (cybermorphs) mirroring experimental mouse embryology, with 50% reductions in FGF4, FGF8 and BMP4 signaling resulting in 86%, 98% and 59% reductions, respectively in the posterior mesodermal population, while ATRA exposure also resulted in a 78% decrease in this population. This model enables integration of in vitro chemical bioactivity data for specific molecular targets with known embryology to test mechanistic veracity and quantitative prediction of altered development.

We suggest progress regarding the following six physics opportunities. List all elementary particles. Describe dark matter. Explain ratios of dark matter to ordinary matter. Explain eras in the history of the universe. Link properties of objects. Interrelate physics models. We use models based on Diophantine equations.

Humanity is currently facing several global problems, such as global warming, air pollution, water pollution, deforestation, desertification and land degradation, which are connected to the consequences of negative human activity. One of the possible and effective institutional tools for environmental protection is the environmental education of the general population. It is a relatively well-known and used environmental protection policy tool that governments of all developed countries have in their instrument mix. This qualitative analysis assigned itself the task of investigating whether the ability of environmental education can be affected by certain neuropsychological diseases in addition to thinking about the psychology of environmental education at large. In order to fulfill this main task, the authors asked themselves the following research questions: 1st - Is pedagogical psychology identical and also applicable in the case of environmental education? And 2nd - What effect do some neuropsychological disorders have on the ability of environmental education? Based on the study, analysis, selection and comparison of current professional scientific works obtained from the research activities of current researches on this topic, it is possible to accept the premise that the psychology of environmental education is basically the same as the general psychology of education and that neuropsychological diseases do indeed affect the ability of environmental education similarly to scholarly education.

We try to solve three decades-old physics challenges. List all elementary particles. Describe dark matter. Describe mechanisms that govern the rate of expansion of the universe. We propose new modeling. The modeling uses extensions to harmonic oscillator mathematics. The modeling points to all known elementary particles. The modeling suggests new particles. Based on those results, we do the following. We explain observed ratios of dark matter amounts to ordinary matter amounts. We suggest details about galaxy formation. We suggest details about inflation. We suggest aspects regarding changes in the rate of expansion of the universe. We interrelate the masses of some elementary particles. We interrelate the strengths of electromagnetism and gravity. Our work seems to offer new insight regarding applications of harmonic oscillator mathematics. Our work seems to offer new insight regarding three branches of physics. The branches are elementary particles, astrophysics, and cosmology.

We develop and apply new physics theory. The theory suggests specific unfound elementary particles. The theory suggests specific constituents of dark matter. We apply those results. We explain ratios of dark matter amounts to ordinary matter amounts. We suggest details about galaxy formation. We suggest details about inflation. We suggest aspects regarding changes in the rate of expansion of the universe. The theory points to relationships between masses of elementary particles. We show a relationship between the strength of electromagnetism and the strength of gravity. The mathematics basis for matching known and suggesting new elementary particles extends mathematics for harmonic oscillators.