Atopic dermatitis (AD) is a chronic skin disease marked by inflammation, erythema, dryness and pruritic lesions. Due to the intermittent nature of the disease, management strategies for AD focus on flare prevention following remission. A 24-year-old patient with mild-to-moderate AD lesions, previously non-responsive to topical corticosteroids (TCS), was treated with pimecrolimus for 12 days and emollient plus cream (EC) every day. After the initial 12-day treatment course, the patient was advised to use pimecrolimus if his symptoms reoccured. AD symptoms improved substantially between Weeks 0 and 12 with daily use of EC. However, by Week 12, his symptoms had relapsed, necessitating retreatment with pimecrolimus. Overall, the patient experienced flare-free periods between Weeks 3 and 12 and between Weeks 13 and 16. No tolerability issues were reported. This case report demonstrates the use of a complementary approach of daily administration of maintenance EC and intermittent application of pimecrolimus for flare management, which was effective for treating a patient with mild-to-moderate AD resistant to TCS.

Nowadays, network simulators are very useful to model a communications system. In this technical note we will focus in the creation of a new error model in NS-3 network simulator. This note describes the main steps to create or modify an Wi-Fi error model in this network simulator. In our case, we have created a new error model to included the approach of [1] to compute PER (Packet Error Rate) for vehicular environments.

Network Simulators (NS) is typically used to study services and applications in complex scenarios due to the infeasibility of deploying real testbeds. This is the case of Mobile Ad hoc Networks (MANETs) which can be extensively used in emergency situations or to gather information without infraestructure. An important factor to get realiable results in the MANETs’ simulations is the wireless channel module of NSs. In this report, we explain how thw wireless channel is implemented in NS-3 and it can be configured.

NS-3 is one of the most used Network Simulators because it includes different modules, applications and protocols to simulate a wide range of network. Since new proposals usually involve a large number of simulations, a procedure to automatize the simulation process and extract statistics is very useful. "Statistical Framework" (SF) is an important module of NS-3 because it fulfills this need. SF allows us to collect simulation data and obtain statistical reports for NS-3. In this report, we present a detailed description of statistical framework module and two useful examples of its configuration.

Cassava (Manihot esculenta Crantz), domesticated in the Amazonian region of South America, presents an important diversity in Ecuador, where it is a main staple food; however, only few Ecuadorian cassava accessions have been included in international molecular assessments. The purpose of this study was to apply suitable cassava mi-crosatellites to characterize the genetic variability of the Ecuadorian cassava collection composed mainly of local landraces from the Coast, Andes and Amazonia regions. The use of microsatellite markers allowed the determination of the genetic diversity of the collection. Seven selected SSR primers, permitted to identify homozygous and hetero-zygous materials within the cassava collection of 133 accessions. The loci presented an average genetic diversity value of 0.7 and an average PIC value of 0.67, which is con-sidered high. Low number of duplicates (8.8%) were identified in the Ecuadorian col-lection which is not fully duplicated at CIAT. Currently, a wide range of cassava diver-sity is still cultivated in multi-crop agro-ecosystem, mainly in the Coast and Amazo-nian regions. Especially in the Amazonian region, due to important cultural uses of cassava by local ethnic communities, more in depth studies in the region could unveil the genetic diversity present in situ today.

Nowadays, network simulators are frequently used to study services, applications and to solve problems in complex scenarios of communications. For this reason, the objective of this article is to introduce detailed information about installation of OMNET++ to new users. In this report, we show how to install OMNET++ simulator over a widely used distribution of Linux and how to integrate "Inet", "Inetmanet" and "Veins" frameworks with the simulator. We take care to explain this integration step-by-step. This tutorial includes: a virtual machine as additional material. Our objective is make it easy for a beginner research community in OMNET++ and to maintain an open environment of knowledge.

Background: Hospital accreditation has become ubiquitous in developing countries. Although studies recognize that accreditation can improve healthcare quality, efficiency, and safety, there are doubts about how hospitals deal with conflicts caused by the different institutional logics that inhabit this process. Therefore, this study aimed to investigate how professional and market logics, as well as the conflict between institutional demands, affect compliance with hospital accreditation. Methods: To this end, we developed a multiple case study in four Brazilian hospitals through in-depth interviews with sixteen participants (managers, physicians, nurses, physiotherapist) and on-site observation by the triangulation between the analysis of the narratives and the results of the multiple correspondence analysis. The interpretation and subsequent categorization of the interviews were guided by the study's analytical categories: institutional logics (professional and market); adoption objectives (legitimacy and efficiency); strategic responses to adoption (conformity, non-conformity, and customization); nature of demands (origin in the means and in goal). Results. The data showed that when professional logic is prominent, there is a greater tendency to customize activities, as there are conflicts in the means by which activities can be developed. When market logic stands out, there is a risk of non-conformity, mainly because the focus falls exclusively on goals. Finally, the data point to the absence of conflicts between justifications related to efficiency and legitimacy. Conclusion. We conclude the study by highlighting the theoretical and practical implications of recognizing the conflict between logics, contributing to a deeper understanding of how logic influences the attention given to specific demands and, more significantly, how they affect compliance with hospital accreditation standards, expanding the body of knowledge in the area.

The research reported on this paper was aimed at improving the overall efficiency of a PDO certified artisanal cheese production process. Being a PDO certified foodstuff by the EU, it is considered to have properties and qualities determined by the geographical environment in which is made, with its production taking place in a specific and determined geographical location, in this case the Serra da Estrela region. In that sense, the authors conducted a mapping according to a systemic perspective of the processes involved in the context of manufacturing and distribution of certified Serra da Estrela cheese. Numerous methods were used throughout the process, such as a systemic design analysis, and techniques derived from ethnographic methods, which led to the collection of data in the field and consequently provided the immersion of the researcher in genuine work situations. Critical points were identified and emphasized in the systemic map with the purpose of encouraging initiatives to address and overcome the gaps and inefficiencies detected. The systemic design analysis triggered the development of design work. Observations following an ethnographic approach identified ergonomic risks in cheese making during the process of cutting excess chips, fostering the emergence of musculoskeletal disorders at the wrist. A tool that fits best to the task at hand was developed. A prototype of the new tool enabled collecting feedback from use in the work context, in order to inform product development. The domains of agricultural production and microbiology, considering the specific microorganisms developed trough the ripening process of the cheese, turned out to be aspects of high importance for the issue under focus, contributing to a broader understanding of the ripening process and its risks, simultaneously improving the efficiency and success of cheese production. If it were not for the systemic analysis, which served as a link between the boundaries of distinct domains such as the risk of microorganism contamination, ergonomics, energy efficiency, legislation and regulation policies, transportation challenges and economic viability, approached throughout the research. Simultaneously creating bridges between them, the various problems might not have been detected in the first place, as they are usually addressed in specialized disciplines, predetermined by the restrictions of each specific area of knowledge. As a consequence of the development of this research, which was based on an analysis that sought to establish possible connections between various disciplines and tried to constantly maintain a holistic perspective, making new connections and observing the issues from a new angle, apart from the already established methodologies. All this allowed to lay out the seeds for the development of a plan to tackle the critical points identified by the systemic analysis reported in this paper.

Stress plays a central role in functioning for all life forms. As humans, we experience stress in a multitude of ways through various types of stimuli. Due to the constancy of stressors in our lives, the nervous system has learned to allosterically adapt to the stimuli, but when the body cannot adapt, chronic stress can have morphological and degenerative impacts on neuroanatomy and cognitive function that may or may not be reversible. This literature review aimed to identify the specific neuroanatomical structures impacted most by the long-term effects of chronic stress and the subsequent relationship the morphological changes had on cognitive function in rodent models. We examined articles published from PubMed, Google Scholar, and Science Direct, while focusing the search on anatomical and neurodegenerative effects associated with chronic stress stimuli. The degenerative effects of various types simulated physiological chronic stress showed the most impact on neurogenesis and neuronal development, brain plasticity, and spatial learning and memory with association to the hippocampus. The hippocampus, amygdala, prefrontal cortex, and hypothalamic-pituitary-adrenal axis (HPA) all had reversible and non-reversible morphological alterations, which also had a direct impact on the brain’s cognitive abilities. While studies regarding chronic stress are still being conducted, future research may be able to further highlight why stressful stimuli can particularly impact these structures and the tangential impacts that it may have on related or adjacent structures.

Cancer patients may experience significant distress. The “Emotion Thermometers” (ETs) are a short visual analogue scale used to screen patients for psychosocial risk. This study aimed to assess emotional distress in a large sample of cancer patients attending psychological services at an NGO, and to explore factors that may contribute to it. The ETs were answered by 899 cancer patients. They were, on average, 59.9 years old, the majority were female, had breast cancer, were under treatment or were disease-free survivors, and reported high levels of emotional distress, above the cut-off (≥5). A Generalized Linear Model was used to measure the association between the level of Distress and 33 items of the problem list. Four items - sadness, depression, sleep and breathing - were found to be significantly related to a higher level of Distress. Additionally, women and those who were in the palliative phase also had significantly higher levels of Distress. Conclusions: The results confirm the need for early emotional screening in cancer patients, as well as the relevance of attending to the characteristics of each patient. Additionally, they highlight the utility of the ETs for the clinical practice, allowing to optimize the referral to specialized psy-chosocial services.

Sepsis is a life-threatening condition caused by a dysregulated host response to an invading pathogen such as multidrug-resistant bacteria. Despite recent advancements, sepsis is a leading cause of morbidity and mortality, resulting in a significant global impact and burden. This condition affects all age groups, with clinical outcomes depending mainly on timely diagnosis and appropriate early therapeutic intervention. Because of the unique features of nanosized systems, there is a growing interest in developing and designing novel solutions. Nanoscale-engineered materials allow a targeted and controlled release of bioactive agents, resulting in improved efficacy with minimal side effects. Additionally, nanoparticle-based sensors provide a quicker and more reliable alternative to conventional diagnostic methods for identifying infection and organ dysfunction. Despite recent advancements, fundamental nanotechnology principles are often presented in technical formats that presuppose advanced chemistry, physics, and engineering knowledge. Consequently, clinicians may not grasp the underlying science, hindering interdisciplinary collaborations and successful translation from bench to bedside. In this review, we abridge some of the most recent and most promising nanotechnology-based solutions for sepsis diagnosis and management using an intelligible format to stimulate a seamless collaboration between engineers, scientists, and clinicians.

This study analyzes the relationship between the spread of the SARS-CoV-2 virus (COVID-19) and the mobility patterns of the Portuguese population. By reducing mobility, the idea is that contacts are reduced, countering the spread of the virus in the community. As an indicator of the spread of the virus, the reproduction number (Rt) was used. Data from Google's Community Mobility Reports was used to evaluate changes in mobility patterns. This report uses location data from Android mobile phone users. The locations are divided into retail and recreation, grocery and pharmacy, parks, transit stations, workplaces and residential. In this year of the COVID-19 crisis in Portugal, population mobility patterns have changed over the various phases of the pandemic. At first, all mobility was affected uniformly, with the population avoiding much of the activity outside the home. In a second phase, there was some adaptation, and the areas considered to be of lower risk had less impact, emphasizing the changes in the relationship between daily life and the workplace.

Music-domain visual programming languages (VPLs) have shown to be Turing complete. However, the common lack of built-in flow control structures can obstruct using VPLs implementing general-purpose algorithms, which harms the direct use of algorithms and algorithm theory in art creation processes using VPLs. In this article, we show how to systematically implement general-purpose algorithms in music-domain visual languages by using the Finite State Machines with Datapath computation model. The results expose a finite state machine and a set of internal state variables that walk paths whose speed can be controlled using a metronome ticks and whose path depends on the initial conditions of the algorithm. These elements can be further mapped to music elements according to the musician's intentions. We demonstrate this technique by implementing Euclid's Greatest Common Divider algorithm and using it to control high-level music elements in an implementation of Terry Riley's In C, and to control audio synthesis parameters in a FM synthesizer.

Decoherence with recurrences appear in the dynamics of the one-body density matrix of an $F = 1$ spinor Bose-Einstein condensate, initially prepared in coherent states, in the presence of an external uniform magnetic field and within the single mode approximation. The phenomenon emerges as a many-body effect of the interplay of the quadratic Zeeman effect, that breaks the rotational symmetry, and the spin-spin interactions. By performing full quantum diagonalizations very accurate time evolution of large condensates are analyzed, leading to heuristic analytic expressions for the time dependence of the density matrix, in the weak and strong interacting regimes. We are able to find accurate analytical expressions for both the decoherence and the recurrence times, in terms of the number of atoms and strength parameters, that show remarkable differences depending on the strength of the spin-spin interactions. We discuss the nature of these limits in the light of the thermodynamic limit.

Peak-to-Average Power Ratio (PAPR) is one of the main problems in wireless communications using Orthogonal Frequency Division Multiplexing (OFDM). Its behavior is random and can produce problems for the hardware implementation, directly influencing the Packet Error Rate (PER). In this article, the PER is obtained for channels with Rayleigh and Rician fading. In the simulation, a High Power Amplifier (HPA) is added to the transmitter and for PAPR reduction Simple Amplitude Predistortion-Orthogonal Pilot Sequences (OPS-SAP) technique is used.

Orthogonal Frequency Division Multiplexing (OFDM) is a technique widely used in today's wireless communication systems due to its ability to combat the effects of multi-path in the signal. However, one of the main limitations of the use of OFDM is its high Peak-to-Average Power Ratio (PAPR), which reduces the efficiency of the OFDM system. The effects of PAPR can produce both out-of-band and in-band radiation, which degrades the signal by increasing the bit error rate (BER), this occurs in both baseband and bandpass sginals. In this document the effect of the PAPR in a OFDM passband signal is analyzed considering the implementation of a High Power Amplifier (HPA) and the Simple Amplitude Predistortion-Orthogonal Pilot Sequences (OPS-SAP) scheme to reduce the PAPR.

Abstract: Nordic exercises aim to improve physical abilities and prevent injuries; However, it is not clear in what type of sports modalities to use it, so this study arises from the interest of ana-lyzing its effect in different sports modalities. Objective: To analyze Nordic exercises effects on the lower limbs, and their relationship with the explosive and absolute strength inherent to demands of different sports modalities (football, athletics, basketball, sport climbing, cycling and taekwondo). Method: quasi-experimental research, identifying 122 athletes (18±3 years old) from: football (n=24), athletics/speed (n=20), sport climbing (n=20), basketball (n=24), taekwondo (n=14) and cycling (n=20); classified into a control group CG (n=57) and an experimental group EG (n=65). Results: dominant absolute strength of the initial (12.4±0.51) and final (14.5±0.98) EG, in greater proportion in basketball (P= < 0.05); explosive strength of the initial (42.4±1.2) and final (45.8±1.5) EG, with a significant difference in all modalities between before and after (p≤0.05), except in cy-cling and taekwondo; no major changes were found in the GC. Conclusion: Nordic exercises are recommended as part of training to improve levels of explosive strength with emphasis on the modalities of football, basketball, athletics/speed and sport climbing, being applicable to increase absolute strength in basketball.

Underwater communication for Underwater Wireless Sensor Networks (UWSNs) faces challenges due to the unique underwater environment. This review explores these challenges (attenuation, multipath propagation, limited bandwidth) across acoustic, optical, and radio frequency (RF) communication channels. It highlights how innovative antenna designs are crucial to mitigate these limitations and enable efficient data transmission. The review analyzes monopole, dipole, and helical antennas, discussing their trade-offs in radiation pattern, efficiency, and mitigating multipath effects. Advancements in materials, metamaterials, and reconfigurable antennas offer promising solutions for improved signal propagation, reduced attenuation, and better environmental adaptability. Research gaps include material exploration for low-conductivity antennas and optimizing antenna designs. Rigorous performance evaluation remains essential. Overall, advancements in underwater antenna technology are key to unlocking the full potential of UWSNs and enabling breakthroughs in marine applications.

Malaria remains an important and challenging infectious disease, and novel antimalarials are required. Benzyl isothiocyanate (BITC), the main breakdown product of benzyl glucosinolate, is present in all parts of Tropaeolum majus L. (T. majus) and has antibacterial and antiparasitic activities. To our knowledge, there is no information on the effects of BITC against malaria. The present study evaluates the antimalarial activity of BITC and T. majus seeds, leaves, and stems aqueous extracts. We used flow cytometry to calculate the growth inhibition (GI) percentage of the extracts and BITC against unsynchronized cultures of chloroquine-susceptible Plasmodium falciparum (P. falciparum) 3D7-GFP strain. Extracts and/or compounds with at least 70% GI were validated by IC50 estimation against P. falciparum 3D7-GFP and Dd2 (chloroquine-resistant strain) unsynchronized cultures by flow cytometry, and the resistance index (RI) was determined. T. majus aqueous extracts showed some antimalarial activity higher in seeds than in leaves or stems. BITC’s GI was comparable to chloroquine’s. BITC’s IC50 was similar in both strains, thus a cross-resistance absence with aminoquinolines was found (RI < 1). BITC presented features that could open new avenues for malaria drug discovery.

The Life Cycle Analysis (LCA) was used to assess the impact of biomethane plant of the “La Católica” in Pedregal-Majes-Arequipa farm, fed with cow manure and holding a production of 60 Nm3/day of purified biogas. Life cycle inventory, impact assessment and interpretation were performed. The functional unit established was 1 MJ of energy produced; the study was modeled with SimaPro software, Ecoinvent Database and ReCiPe Midpoint (H) impact assessment methodology, according to the impact categories of climate change and fossil resource depletion. The impact analysis was limited to the Well to Tank (WTT) approach, which involves feedstock transport, substrate mixed, anaerobic digestion, biogas purification, storage and injection of the fuel into transport vehicles. The digestion process generated the highest amount of CO2 emissions (1.79E-02 kg CO2 eq/MJ-biomethane) and the highest depletion of fossil resources (6.58E-03 kg oil eq/MJ-biomethane), compared to the other fuel production, due to energy consumption and transport infrastructure. Biomethane was then compared to fossil fuels, resulting in natural gas generating the least amount of CO2 emissions, followed by diesel and finally biomethane. For the fossil resource depletion category, biomethane presented the lowest amount of fossil fuel consumption (1.37E-02 kg oil eq/MJ-biomethane), followed by natural gas and diesel.

There are currently around 78 Nuclear Power Plants (NPP) in the world based on Boiling Water Reactors (BWR). The current parameter to assess BWR instability issues is the linear Decay Ratio (DR). However, it is well known that BWRs are complex non-linear dynamical systems that may even exhibit chaotic dynamics that normally preclude the use of the DR when the BWR is working at a specific operating point during instability. In this work a novel methodology based on an adaptive Shannon Entropy estimator and on Noise Assisted Empirical Mode Decomposition variants is presented. This methodology was developed for real-time implementation of a stability monitor. This methodology was applied to a set of signals stemming from several NPPs reactors (Ringhals-Sweden, Forsmark-Sweden and Laguna Verde-Mexico) under commercial operating conditions, that experienced instabilities events, each one of a different nature

This comprehensive review is devoted to an under-exploited family of phenolic compounds, the coumarins, and the most relevant strands in which they are involved in some spirit beverages – wine spirit, brandy, whiskey, sugar cane spirits (rum and cachaça) and grape marc spirit – with great importance worldwide in terms of production, trade and consumption. It gathers the key discoveries on the topic considering the production process of each spirit beverage, the related sources of coumarins (different kinds of wood used in the ageing stage) along with the factors that govern them and can influence the sensory properties of the aged beverages. An overview of the analytical methods available for their identification/quantification is also included, as well as the corresponding trends for the advancement of knowledge in this field. Moreover, the remarkable role of coumarins as nutraceuticals, their importance as chemical markers for authenticity purposes, and their relationship with food safety of these spirit beverages are also addressed, highlighting the current gaps and issues, and providing clues for future research.

Knowledge of the agricultural soil microbiota, of the microbial consortia that comprise it, and the promotion of agricultural practices that maintain and encourage them, is a promising way to improve soil quality for sustainable agriculture and to provide food security. Although numerous studies have demonstrated the positive effects of beneficial soil microorganisms on crop yields and quality, the use of microbial consortia in agriculture remains low. Microbial consortia have more properties than an individual microbial inoculum, due to the synergy of the microorganisms that make them up. This review describes the main characteristics, ecosystem functions, crop benefits and biotechnological applications of microbial consortia composed of arbuscular mycorrhizal fungi, plant growth promoting bacteria and actinobacteria, to promote the restoration of agricultural soils and, consequently, the quality and health of agricultural crops. The aim is to provide knowledge that will contribute to the development of sustainable and sufficiently productive agriculture, which will adapt in a good way to the pace of the growing human population and to climate change.

This paper seeks to optimize the mechanical and durability properties of ultra-high performance concrete (UHPC). To meet this objective, concrete specimens were manufactured by using 1,100 kg/m3 of binder, water/binder ratio 0.20, silica sand and last generation of superplasticizer. Silica fume, metakaolin and two types of nano silica were used for improving the performances of the concrete. Additional mixtures included 13mm long OL steel fibers. Compressive strength, electrical resistivity, mercury intrusion porosimetry tests and differential and thermogravimetric thermal analysis were carried out. The binary combination of nano silica and metakaolin, and the ternary combination of nano silica with metakaolin and silica fume, led to the best performances of the UHPC, both mechanical and durable performances.

Recently, the conformable derivative and its properties have been introduced. In this paper, we propose and prove some new results on conformable Boundary Value Problems. First, we introduce a conformable version of classical Sturm´s separation, and comparison theorems. For a conformable Sturm-Liouville problem, Green's function is constructed, and its properties are also studied. In addition, we propose the applicability of the Green´s Function in solving conformable inhomogeneous linear differential equations with homogeneous boundary conditions, whose associated homogeneous boundary value problem has only trivial solution. Finally, we prove the generalized Hyers-Ulam stability of the conformable inhomogeneous boundary value problem.

Geoethics is a field of knowledge currently in full development. Researchers in geoethics are pri-marily concerned with the anthropogenic interaction with the Earth system. Due to its nature, ge-oethics holds particular importance in sustainable development due to its nature as it aims to promote ethical human behaviour that does not negatively impact the Earth system. In the present research, we implemented an intervention program addressing various issues related to the sus-tainability of the Earth system, such as the exploitation of geological resources, the management of geological risks, and the conservation and promotion of geopatrimony. The intervention program was applied to higher education students in the geosciences field. A sample of 90 students from various geosciences courses completed an initial questionnaire, revealing limited knowledge about geoethics. This study resorted to mixed-method research involving interviews with some students who volunteered (n=52). The results showed that after applying the intervention programme most students had developed a deeper understanding of the topics addressed and recognised the con-tributions this scientific area can make to sustainable development. Additional research in geoethics education is essential to foster the integration of geoethics into the curricula of higher education institutions.

Achieving universal access to water and sanitation services in developing countries requires a coherent legal, political, and institutional environment, along with a clear financial strategy. Regionalizing utilities may be crucial for addressing disparities, economic inequalities, and governance challenges. Regionalization offers economies of scale, resource efficiency, knowledge sharing, and collaboration. The cornerstone will be ensuring the financial-economic viability of regional utilities, considering their social impacts in terms of affordability. The State of Santa Catarina case study is assessed. In the case of Santa Catarina, only four regional utilities currently generate sufficient revenue, without factoring in necessary investments, indicating the need to review design parameters to improve operational efficiency and increase revenues. Additional financial support may be required to ensure universal access. Tariff adjustments must strike a balance between cost-effectiveness and affordability for families.

: A comprehensive analysis was performed, considering blockchain technology (BT) proprieties in digital health, addressing medico-legal, privacy, and regulatory considerations. Adherence to personal data protection and healthcare regulatory guidelines were analyzed and compared for GDPR (Europe), HIPAA (United States), CCPA (California), PIPEDA (Canada), Privacy Act of 1988 (Australia), APPI (Japan), and LGPD (Brazil). Issues such as Health Systems, Strengthening and aligning policy orientations and initiatives, and emphasizing the role of data analysis in shaping health policies were explored. The study addressed conflicts between the legal frameworks and blockchain, comparing and suggesting solutions like revision of laws and integration of com-pliance mechanisms. Additionally, it sought to enhance IT-health literacy by integrating healthcare and legal domains. Ongoing collaboration between legal, health, and IT experts is essential for designing systems that effectively balance privacy rights and data protection while maximizing the benefits of disruptive technologies like blockchain.

Several empirical studies indicate that the lack of financing is one of the main barriers that affects the economic growth of small and medium enterprises (SMEs). The main objective of this investigation was to determine to what extent the economic sector; enterprise size; the characteristics inherent to the enterprise; legal status; the variables linked to the performance of the enterprise; and the attributes of the owner influence the access to bank financing of SMEs in Mexico. Using a discrete response probit regression model, the impact of enterprises characteristics on the probability of obtaining a bank loan was determined. The data collected is from the Enterprise Surveys of Mexico, carried out by the World Bank. The sample of 1,480 enterprises is representative by enterprise size, by economic sector, and by region. The research has a quantitative approach with a correlational scope and a non-experimental and transectional design. One of the main results highlights that the determinants with the greatest influence on access to bank financing are: age, the small size, foreign participation, and the manufacturing sector. These results are consistent with other empirical studies, as well as with the pecking order theory and the financial life cycle theory.

Precision medicine approaches often relies on complex and integrative analysis of multiple biomarkers from “omics” data to generate insights that can help either diagnostics, prognostics or therapeutical decisions. Such insights are often made using Machine learning (ML) models that make sample classification for a particular phenotype (yes/no). Building such models is a challenge and time-consuming, requiring advanced coding skills and mathematical modelling expertise. Artificial intelligence (AI) is a methodological solution that has the potential to facilitate, optimize and scale model development. In this work, we developed an AI-based, user-friendly and code-free platform (https://digitalphenomics.com) that fully automates the development of predictive models from quantitative “omics” data. Here, we show the application of this tool with the development of cancer survival prognostics models using real-life data from breast, lung and renal cancer transcriptomes. We report and compare their sensitivity, specificity, accuracy and Receiver Operating Characteristic (ROC) curve Area Under the Curve (AUC). Further, we report the associated sets of genes (biomarkers) and their expression pattern that are predictive of cancer survival. Moreover, we made our models available as online tools to generate prognostic predictions based on the gene expression of the biomarkers. In conclusion, we demonstrated that our tool is a robust user-friendly solution to develop bespoke predictive tools from “omics” data which facilitate precision medicine introduction to the point-of-care.

Background: To inform global health policies and resources planning, this paper analyzes evolving trends in physical rehabilitation needs, using data on Years Lived with Disability (YLDs) from the Global Burden of Disease Study (GBD) 2017. Methods: Secondary analysis of how YLDs from conditions amenable to physical rehabilitation have evolved from 1990 to 2017, for the world and across countries of varying income levels. Linear regression analyses were used. Results: A 66.2% growth was found in estimated YLD Counts amenable to physical rehabilitation: a significant and linear growth of more than 5.1 billion YLDs per year (99%CI: 4.8–5.4; r² = 0.99). Low-income countries more than doubled (111.5% growth) their YLD Counts amenable to physical rehabilitation since 1990. YLD Rates per 100,000 people and the percentage of YLDs amenable to physical rehabilitation also grew significantly over time, across locations (all p > 0.05). Finally, only in high-income countries Age-standardized YLD Rates significantly decreased (p < 0.01; r² = 0.86). Conclusions: Physical rehabilitation needs have been growing significantly in absolute, per-capita and in percentage of total YLDs, globally and across countries of varying income level. In absolute terms, growths were higher in lower income countries, wherein rehabilitation is under-resourced.

Evaluating mutation testing behavior can help decide whether refactoring successfully maintains the expected initial test results. Moreover, manually performing this analytical work is both time-consuming and prone to errors. This paper extends an approach to assess test code behavior and proposes a tool called MeteoR. This tool comprises an IDE plugin to detect issues that may arise during test code refactoring, reducing the effort required to perform evaluations. A preliminary assessment was conducted to validate the tool and ensure the proposed test code refactoring approach is adequate. By analyzing not only the mutation score but also the generated mutants in the pre- and post-refactoring process, results show that the approach is capable of checking whether the behavior of the mutants remains unchanged throughout the refactoring process. This proposal represents one more step toward the practice of test code refactoring. It can improve overall software quality, allowing developers and testers to safely refactor the test code in a scalable and automated way.

This paper, the second in a series of two, describes the experimental results for removing arsenic from the dust collected in the electrostatic precipitators of a fluidized bed roasting oven (RP dust). The RP dust produced is discharged as a toxic waste, although its copper content is close to 20% by weight. This work aims to process the RP dust; until obtained a material with a low concentration of arsenic, which could be recirculated in smelting operations and recover the valuable metals. Based on the successful experience obtained in the first document with FS dust, this work proposes to use the reduction-sulphidation-volatilization processes to carry out the volatilization of arsenic from RP dust. A set of experiments was realized in the roasting different ratios of the mixture of copper concentrate / RP dust, sulfur / RP dust varying temperature and roasting time; to reach an arsenic concentration <0.5% by weight. The RP dust was characterized using different techniques, that confirmed more than 20% by weight of copper and describing its structure as a small particle agglomerate (<5 µm), with a complex sulfoxide morphology. The main results indicated: that for a 75/25 mixture of the copper concentrate / PR dust under 700 ° C, 15 minutes roasting time with air atmosphere, the arsenic volatilization was 96% by weight. Meanwhile, for a 5/95 mixture of sulfur / RP dust, at 650 ° C, the volatilization of arsenic was 67% by weight.

This paper (the first of a series of two) seeks to describe the experimental results of removing arsenic from dust collected in electrostatic precipitators of copper into the pyro-metallurgy gas cleaning systems. The first work corresponds to the treatment of dust contained in gas off generated in the copper Flash Smelting Furnace process (FS dust), while the second focuses on the treatment of dust generated from a Fluidized Bed Roasting Furnace (RP dust). The dust is complex sulphur-oxide-metals with concentrations of copper above 10 wt % and relatively high concentrations of silver. Due to the dust has an arsenic’s concentration above 5 wt %, makes it difficult to recover valuable metals through hydro-metallurgical processes or by direct recirculation of the dust into a smelting furnace. Thus, the development of pyrometallurgical processes aimed to reduce the concentration of arsenic in dust is the main purpose of this study, particularly the production of a material suitable for recirculation in smelting operations. The works conducted provide a detailed characterization of the dust, including Quantitative Evaluation of Minerals by Scanning Electron Microscopy (QEMSCAN), Scanning electron microscope-Energy Dispersive X-ray analysis (SEM/EDS), X-ray diffraction (XR-D), elemental chemical analysis using Atomic Adsorption (A. A.) and X-Ray Fluorescence (X-RF). By considering that arsenic volatilization requires a process of reduction-sulphidation-volatilization, the works explore the roasting of mixtures of copper concentrate/dust, sulphur/dust and pyrrhotite/dust. The degree of volatilization was determined by elemental chemical analysis of arsenic in the mixture after and before the roasting process. The results indicated the effect of parameters such as temperature, gas flow, gas composition and the ratio of mixtures (concentrate, sulphur or pyrrhotite)/dust on the volatilization of arsenic. The findings indicate that the concentration of arsenic in the FS dust can be reduced to a relatively low level (<0.5 wt %), allowing to the material to be recirculated into smelting processes.

This work exclusively focuses on the assessment of the thermal performance of a multifunctional facade panel incorporating PCM in foam layers, recurring to a hot box heat flux meter method to determine the thermal transmittance (U-value). The experimental setup is based on the steady-state approach using climatic chambers, assuring a stable thermal environment. Even small fractions of PCM achieved a small reduction in thermal amplitude. Numerical simulations using Ansys Fluent were developed to evaluate the performance of PCM use over a wide range of temperature boundary conditions and operating modes. These numerical models were calibrated and validated using the results of experimental tests, achieving a correlation factor of 0.9674, thus accurately representing a real-world scenario. The decrement factor (f) was used to analyse the data. It was identified that the efficiency of the panel and size of the optimum region increased with the PCM fraction growth. The simulated behaviour was optimum when the input mean temperature is of 20 °C for a room temperature of between 18-20 °C. The results show the significant potential of the multi-layered panel and the thermal regulator effect of the PCM incorporated on indoor space temperature to reach good thermal comfort levels.

(1) Background: The purpose of this study was to investigate the relationship between IMO and burnout while assessing the contribution of job demands and resources on increasing internal orientation and worker well-being and, consequently, the levels of perceived performance; (2) Methods: Data were collected between April and December 2021 by completing an online questionnaire, developed in the Google Forms platform. The following descriptive statistics were analyzed: measures of central tendency (mean), dispersion (standard deviation), minimum value and maximum value. Next, Pearson's correlation coefficient was calculated to analyze the relationship between the variables under study.; (3) Results: The results showed the mediating effect of IMO between performance feedback and perceived performance, while burnout mediates the relationship between emotional and technology demands and perceived performance. (4) Conclusions: These conclusions demonstrate that constructive feedback might help a more efficient performance through better internal communication and the positive effects of technology demands could be the result of the interaction between personal and organizational resources.

In traditional databases, the entity resolution problem (which is also known as deduplication), refers to the task of mapping multiple manifestations of virtual objects to its corresponding real-world entity. When addressing this problem, in both theory and practice, it is widely assumed that such sets of virtual object appear as the result of clerical errors, transliterations, missing or updated attributes, abbreviations, and so forth. In this paper, we address this problem under the assumption that this situation is caused by malicious actors operating in domains in which they do not wish to be identified, such as hacker forums and markets in which the participants are motivated to remain semi-anonymous (though they wish to keep their true identities secret, they find it useful for customers to identify their products and services). We are therefore in the presence of a different, even more challenging problem that we refer to as adversarial deduplication. In this paper, we study this problem via examples that arise from real-world data on malicious hacker forums and markets arising from collaborations with a cyber threat intelligence company focusing on understanding this kind of behavior. We argue that it is very difficult---if not impossible---to find ground truth data on which to build solutions to this problem, and develop a set of preliminary experiments based on training machine learning classifiers that leverage text analysis to detect potential cases of duplicate entities. Our results are encouraging as a first step towards building tools that human analysts can use to enhance their capabilities towards fighting cyber threats.

A major challenge of augmented and mixed reality applications is identifying the context and semantics of the real environment. Studies on object and action recognition were developed based on the improvement of machine learning techniques, allowing them to be annotated and recognized. This study aims to characterize current knowledge on the use of machine learning for recognizing objects and actions in augmented and mixed reality environments, increasing context awareness. Therefore, a systematic literature review of works related to these topics was made, using the Scopus and Web of Science knowledge bases. We searched articles and conference reviews or papers published between 2018 and 2022 and selected fifteen studies to be reviewed. The results indicate that there is a great demand for using machine learning to immersive technologies in factories, engineering, entertainment, education, health, among other application domains. However, these real-time interactive systems still have challenges and limitations to be solved, involving network communication, prediction time and the creation of a model that recognize objects and actions in broad contexts. Furthermore, additional research is needed to investigate how object and action recognition can increase context awareness in augmented reality applications.

According to previous studies the median raphe region (MRR) is known to contribute significantly to social behavior. Beside serotonin, there are reports of a small population of dopaminergic neu-rons in this region. Dopamine is linked to reward and locomotion, but very little has been known about its role in the MRR. To address that, we first confirmed the presence of dopaminergic cells in the MRR of mice (immunohistochemistry, RT-PCR) and humans (RT-PCR). Next, we used chemogenetic technology in mice containing Cre enzyme under the promoter of the dopamine transporter (DAT). With the help of an adeno-associated virus, artificial receptors were expressed in the dopaminergic cells of the MRR (DAT-MRR). Four weeks later, extensive behavioral charac-terization started 30 minutes after the injection of the artificial ligand (Clozapine-N-Oxide). Stimu-lation of DAT-MRR decreased social interest without influencing aggression and with an increase in social discrimination. Additionally, inhibition of the same cells increased the friendly social be-havior during social interaction test. No behavioral changes were detected in anxiety, memory and locomotion. All in all, dopaminergic cells were present both in the mice and human MRR, and manipulation of dopaminergic neurons of the MRR elicited a specific social response.

Conifer bark beetles (Coleoptera: Curculionidae: Scolytinae) are major agents of natural disturbance in temperate forests of the northern hemisphere, capable of killing billions of trees in native forests. The dynamics of these insect populations are influenced by climatic variability. To understand such a relationship, it is necessary to monitor the population fluctuation of the species present over time. In this regard, the objective of the present study was to determine the species community of the genus Dendroctonus, the population fluctuation throughout the months of the year, and the effects of relative humidity, temperature, and precipitation on the fluctuation, at three sites of mixed forests in the Municipality of Bocoyna, Chihuahua, in northern Mexico. For insect monitoring, we used Lindgren funnel traps (with 8 funnels each) baited with semiochemicals. Every two weeks, and during 2 years, we collected, identified, and counted the insects. The identification of the species was based on the external morphology and characteristics of the male seminal rod. Temperature and relative humidity were measured using climate data loggers (HOBOs). We found six Dendroctonus species. We also determined the population fluctuation patterns of D. mexicanus Hopkins, D. frontalis Zimmermann, and D. brevicomis LeConte, species with the highest number of captures at each site. Additionally, the relationship between species abundance and climatic variables was determined. The variable that significantly influenced (P&lt;0.05) abundance was temperature. Relative humidity and precipitation variables did not show a significant relationship (P&gt;0.05).

Background: Asthma is a very prevalent disease with special characteristics during pregnancy, however little is known about its relation to the psychological wellbeing of women in this period; We aimed to know whether depression and anxiety symptoms are more frequent in asthmatic pregnant women. (2) Methods: Family Apgar (week 20), Edinburgh (weeks 20 and 32) and STAI (week 32) tests were administered to 738 pregnant women (81 asthmatics) in the NELA birth cohort; (3) Results: There were no significant differences between asthmatic and non-asthmatic pregnant women in any of the different tests at any of the time points. The mean? scores for the different tests and timepoints between asthmatic and non-asthmatic pregnant women were: Apgar 20, 17.9±2.2 vs. 10.0±2.2; Edinburgh 20, 6.7±4.2 vs. 6.9±4.3; Edinburgh 32, 5.9±4.4 vs. 5.6±4.3; and STAI 32, 16.7±8.4 vs. 15.8±8.3. The proportion of pregnant women out of the normal range score for any of the tests and time points was also similar in both populations. (4) Conclusions: Asthma is not associated with the psychological wellbeing among pregnant women.

Neurodevelopmental and late-onset neurodegenerative disorders present as separate entities that are clinically and neuropathologically quite distinct. However, recent evidence has highlighted surprising commonalities and converging features at the clinical, genomic, and molecular level between these two disease spectra. This is particularly striking in the context of autism spectrum disorder (ASD) and Parkinson’s disease (PD). Genetic causes and risk factors play a central role in disease pathophysiology and enable the identification of overlapping mechanisms and pathways. Here, we focus on clinico-genetic studies of causal variants and overlapping clinical and cellular features of ASD and PD. Several genes and genomic regions were selected for our review, including SNCA (alpha-synuclein), PARK2 (parkin RBR E3 ubiquitin protein ligase), chromosome 22q11 deletion/DiGeorge region, and FMR1 (fragile X mental retardation 1) repeat expansion, which influence development of both ASD and PD with converging features related to synaptic function and neurogenesis. Both PD and ASD display alterations and impairments at the synaptic level, representing early and key disease phenotypes which support the hypothesis of converging mechanisms between the two types of diseases. Therefore, understanding the underlying molecular mechanisms might inform on common targets and therapeutic approaches. We propose to re-conceptualize how we understand these disorders and provide a new angle into disease targets and mechanisms linking neurodevelopmental disorders and neurodegeneration.

Zidovudine (AZT) has significantly reduced the mortality and morbidity rates among AIDS patients, but it has been associated with hepatotoxicity. AZT treatment has been linked to disrupted lipid and glucose metabolism, and the enhancement of pro-inflammatory chemokines and other mediators, which can lead to liver steatosis. In contrast, the administration of adenosine (ADO) has proven to be an effective hepatoprotector against both acute and chronic liver damage. Therefore, present study was aimed to investigate the harmful effects of chronic AZT administration and the beneficial effects of the co-administered ADO. Chronic oral AZT administration did not induce hyperglycemia or dyslipidemia, but serum liver marker enzyme activities were increased, as well as evidence of liver steatosis and inflammation. These findings were associated with low insulin and glucagon levels, elevated serum levels of pro-inflammatory cytokines and disruptions in cell redox states in these animals. ADO co-administration attenuated the deleterious effects induced by AZT: blocking the production of inflammatory molecules, increasing serum insulin and glucagon levels, and restoring liver cellular redox state. Then, blood insulin levels seemed to be greatly influenced by the cellular redox state, which was altered by AZT administration. This alteration is likely to be connected to mitochondrial integrity and metabolism.

Abstract: Comparing outcrop data to laboratory results is important to verify and validate experiments of analogue and reservoir materials especially regarding conditions for deformation experiments. This is important better understand highly complex carbonate reservoir strata and their response to changes in subsurface conditions, reducing subsurface uncertainty. This study develops methods to allow for a more straightforward comparison of outcrop data (m-scale) with experimentally created fracture arrays developed in cylindrical samples (cm-scale). The main objective is to assess usefulness of experimentally-produced fracture networks as analogues for subsurface structures, typically at the meter and above scale by developing new techniques to use the lab deformation. It analyses key characteristics of laboratory-induced fracture networks by adapting scanline methods to use with x-ray tomography (XRT) images to allow for comparison with outcrop and field data. To test and verify these new methods two low permeability carbonate samples were used for deformation testing and analysis. Applying the different scanline methods we show that they can be used to analyse lab induced fractures (mm to cm-scale) identified in XRT images for comparison with outcrop data (m-scale). In addition, these methods also allow for quantification of fracture network attributes e.g. fracture spacing, fracture apertures, orientation. This new data bridges the gap between micro-scanlines using thin sections and outcrop scanlines.

Despite the efforts made to stop the tuberculosis (TB) epidemic, it still remains one of the leading causes of death from an infectious disease. Previous work in the group uncovered a new family of amides which showed promising activities against Mycobacterium tuberculosis. A closer look at the literature showed that these compounds are structurally related to the DNB family of DprE1 inhibitors, so, we decided to study a wide range of substituted amides and determine their activity, focusing on unexplored structures related to the dinitrobenzamides (DNB) found in the literature. To synthesize our library of compounds we started from 3,5-dinitrobenzoic acid to form the nitroaromatic core that is characteristic of the DNB’s, to which we then added linear or cyclic amine moieties. Additionally, the impact of terminal aromatic moieties was also assessed for some derivatives, via an ether, ester, or amide bond. In order to obtain the desired derivatives, multiple synthetic approaches were used, mainly focused on nucleophilic addition/elimination reactions, SN2 reactions and Mitsunobu reactions. The activity was impacted mainly by two structural features, the addition of an aromatic moiety as a terminal group and the type of the linker. The most interesting compounds exhibited activities comparable to isoniazid and DNB1. Computational studies were also performed aimed at understanding their possible interactions with DprE1. The most active compounds are a good starting point for further development, and we plan to study an extended family of compounds based in those structures.

Purpose: The goal of this article was to introduce a new technique for root coverage (RC), the Mixed-Thickness Tunnel access (MiTT), approaching a full-split design, showing the results obtained in a case series and demonstrating it step-by-step. Methods: Healthy individuals, non-smokers, and non-diabetics, who were diagnosed with gingival recession (GR) type 1 or 2 (RT1 or RT2). After all necessary evaluations, prophylaxis was performed 14 days before the surgical procedure. Then, after the basics clinical conduct and anesthesia, one or two vertical incision(s) on the mucosa (around 1-2 mm apical to the MGJ), lateral to the papilla base, were done. Initial detachment of the mucosa from the muscles (split design); it was permitted (but not mandatory) to do intrasulcular incisions; from the MGJ to coronal, subperiosteal access was done to raise the full-thickness tunnel. It must communicate up to the gingival sulcus area and the papilla’s base, keeping the papilla’s tip intact. A connective tissue graft was harvested, which was inserted through the linear incision or intrasulcularly. Interrupted sutures were done and may be used as adjunctive material. Results: Nine healthy individuals (7 females and 2 males) aged 19 and 43 years were enrolled. They were treated following the MiTT steps. There were four cases with a single GR, 2 patients with 2 teeth involved, and three with 3 or 4 GR. Seven cases were RT1 and two RT2. All RT1 cases achieved 100% RC, while the mean RC obtained for RT2 was around 80%. Conclusion: MiTT can be considered a more straightforward approach for minimally invasive surgical technique, which is a feasible option to treat RC with a high success rate, predictability, and esthetic preservation. There is a technical sensitivity to performing the full-split design procedure.

Introduction: Within primary ARDS, SARS-CoV-2-associated ARDS (C-ARDS) emerged in late 2019, reaching its peak during the subsequent two years. Recent efforts in ARDS research have concentrated on phenotyping this heterogeneous syndrome to enhance comprehension of its pathophysiology. Methods and Results: A retrospective study was conducted on C-ARDS patients from April 2020 to February 2021, encompassing 110 participants with a mean age of 63.2±11.92 (26-83 years). Of these, 61.2% (68) were male, and 25% (17) experienced severe ARDS, resulting in a mortality rate of 47.3% (52). Ventilation settings, arterial blood gases, and chest X-ray (CXR) were evaluated on the first day of invasive mechanical ventilation and between days two and three. CXR images were scrutinized using a convolutional neural network (CNN). A binary logistic regression model for predicting C-ARDS mortality was developed based on the most influential variables: age, PaO2/FiO2 ratio (P/F) on days one and three, CNN-extracted CXR features, and age. Initial performance assessment on test data (23 patients out of the 110) revealed an area under the receiver operating characteristic (ROC) curve of 0.862 CI (0.654-0.969). Conclusion: Integrating data available in all intensive care units enables the prediction of C-ARDS mortality by utilizing evolving P/F ratios and CXR. This approach can assist in tailoring treatment plans and initiating early discussions to escalate care and extracorporeal life support. Machine learning algorithms for imaging classification can uncover otherwise inaccessible patterns, potentially evolving into another form of ARDS phenotyping. The combined features of these algorithms and clinical variables demonstrate superior performance compared to either element alone.

Biological samples are a complex and heterogeneous matrix where different macromolecules with different physicochemical parameters cohabit in reduced spaces. The introduction of fluorophores into these samples, such as in the interior of cells, can produce changes in the fluorescence emission properties of these dyes caused by the specific physicochemical properties of cells. This effect can be especially intense with solvatofluorochromic dyes, where changes in the polarity environment surrounding the dye can drastically change the fluorescence emission. In this article, we studied the photophysical behavior of a new dye and confirmed the aggregation-induced emission (AIE) phenomenon with different approaches, such as by using different solvent proportions, increasing the viscosity, forming micelles and adding bovine serum albumin (BSA), through analysis of the absorption and steady-state and time-resolved fluorescence. Our results show the preferences of the dye for nonpolar media, exhibiting AIE under specific conditions through immobilization. Additionally, this approach offers the possibility of easily determining the critical micelle concentration (CMC). Finally, we studied the rate of spontaneous incorporation of the dye into cells by fluorescence lifetime imaging and observed the intracellular pattern produced by AIE. Interestingly, different intracellular compartments present strong differences in fluorescence intensity and fluorescence lifetime. We used this difference to isolate different intracellular regions to selectively study these regions. Interestingly, the fluorescence lifetime shows a strong difference in different intracellular compartments, facilitating selective isolation for a detailed study of specific organelles.

Energy conversion and distribution (heat and electricity) is characterized by long planning horizons, investment periods and depreciation times, and it is thus difficult to plan and tell the technology that optimally fits for decades. Uncertainties include future energy prices, applicable subsidies, regulation, and even the evolution of market designs. To achieve higher adaptability to arbitrary transition paths, a technical concept based on integrated energy systems is envisioned and described. The problem of intermediate steps of evolution is tackled by introducing a novel paradigm in urban infrastructure design.It builds on standardization, modularization and economies of scale for underlying conversion units. Building on conceptual arguments for such a platform, it is then argued how actors like (among others) municipalities and district heating system operators can use this as a practical starting point for a manageable and smooth transition towards more environmental friendly supply technologies, and to commit to their own pace of transition (bearable investment/risk). environmental friendly supply technologies. Merits are not only supported by technical arguments but also by strategical and societal prospects like technology neutrality and availability of real options.

The world is facing a great technological transformation towards full autonomous vehicles, where optimists predict that by 2030, autonomous vehicles will be sufficiently reliable, affordable and common to displace most human driving. To cope with these trends, reliable perception systems must enable vehicles to hear and see all the surroundings, being light detection and ranging (LiDAR) sensors a key instrument for recreating a 3D visualization of the world in real time. However, perception systems must rely in accurate measurements of the environment. Thus, sensors must be calibrated and benchmarked before being placed on the market or assembled in a car. This article presents an Evaluation and Testing Platform for Automotive LiDAR sensors with the main goal of testing not only commercially available sensors, but also sensor prototypes currently under development in Bosch Automotive Electronics division. The testing system can benchmark any LiDAR sensor under different conditions, recreating the expected driving environment to which such devices are normally subjected. To characterize and validate the sensor under test, the platform evaluates several parameters such as the field of view (FoV), angular resolution, sensor’s range, etc. This project results from a partnership between the University of Minho and Bosch Car Multimedia Portugal, S.A.

Students in their first year of computer science (CS1) at universities typically struggle to grasp programming concepts. This paper covers research using a Java programming language-guided visual execution environment (VEE) to teach CS1 students about programming concepts. The topics covered include input and output, conditionals, loops, functions, arrays, recursion, and files, all of which are covered in an introductory programming course. The VEE walks beginner programmers through the fundamentals of programming, utilizing visual metaphors to explain and direct interactive Java tasks. The primary goal of this study is to determine whether a cohort of 105 CS1 students from four different groups who are enrolled in two universities—one in Madrid, Spain, and the other in Galway, Ireland—can advance their programming abilities under the guidance of the VEE. Second, does the improvement vary depending on the programming concept? The findings demonstrate that students' programming knowledge has greatly increased. This improvement is significant for all programming concepts, while it is more pronounced for some topics than others, such as operators, conditionals, and loops. Additionally, it demonstrates that students had little prior understanding of files and recursion. The most well-known concept to them was the sequence concept.

Internet of Things (IoT) technologies can greatly benefit from machine learning techniques and Artificial Neural Networks for data mining and vice versa. In the agricultural field, this convergence could result in the development of smart farming systems suitable for use as decision support systems by peasant farmers. This work presents the design of a smart farming system for crop production, which is based on low-cost IoT sensors and popular data storage services and data analytics services on the Cloud. Moreover, a new data mining method exploiting climate data along with crop production data is proposed for the prediction of production volume from heterogeneous data sources. This method was initially validated using traditional machine learning techniques and open historical data of the northeast region of the state of Puebla, Mexico, which were collected from data sources from the National Water Commission and the Agri-food Information Service of the Mexican Government.

The synthesis and structural characterization of a new triangular Cu3-3OH pyrazolato complex of formula, [Cu3(μ3-OH)(pz)3(Hpz)3][BF4]2 (1-Cu3), Hpz = pyrazole, is presented. The triangular unit forms a quasi-isosceles triangle with Cu-Cu distances of 3.3739(9), 3.3571(9), and 3.370(1) Å. This complex is isostructural to the hexanuclear complex [Cu3(μ3-OH)(pz)3(Hpz)3](ClO4)2]2 (QOPJIP). A comparative structural analysis with other reported triangular Cu3-3OH pyrazolato complexes has been done, showing that, depending on the pyrazolato derivative, auxiliary ligand or counter-anion can affect the nuclearity and/or the dimensionality of the system. The magnetic properties of 1-Cu3 are analyzed by experimental data and DFT calculation. A detailed analysis is done on the magnetic properties comparing experimental and theoretical data of other molecular triangular Cu3-3OH complexes, showing that the displacement of the μ3-OH- from the Cu3 plane, together with the type of organic ligands, influences the nature of the magnetic exchange interaction between the spin-carrier centers, since it affects the overlap of the magnetic orbitals involved in the exchange pathways. Finally, a detailed comparison of the magnetic properties of 1-Cu3 and QOPJIP was done, which allowed us to understand the differences in their magnetic properties.

Renewable Energy Communities (RECs) are emerging as an effective concept and model to empower the active participation of citizens on the energy transition, not only as energy consumers, but also as promoters of environmentally friendly energy generation solutions. This paper aims to contribute to the management and optimization of individual and community Distributed Energy Resources (DER). The solution follows a price and source-based REC management program, in which consumers day-ahead flexible loads (Flex Offers) are shifted according to electricity generation availability, prices and personal preferences, to balance the grid and incentivize user participation. The heuristic approach used in the proposed algorithms allows the optimization of energy resources in a distributed edge and fog approach with a low computational overhead. The simulations performed using real world energy consumption and flexibility data of a REC with 50 dwellings show an average cost reduction of 10.6% and an average increase of 11.4% in individual self-consumption. Additionally, the case-study demonstrates promising results regarding grid load balancing and the introduction of intra-community energy trading.

The complete regression of clear cell renal cell carcinoma (ccRCC) obtained pre-clinically with anti-carbonic anhydrase IX (CAIX) G36 chimeric antigen receptor (CAR) T cells in doses equivalent to 10e8 CAR T cells/ Kg renewed the potential of this target to treat ccRCC and other tumors in hypoxia. The immune checkpoint blockade (ICB) brought durable clinical responses in advanced ccRCC and other tumors. Here we tested CD8/4-1BB compared to CD28-based anti-CAIX CAR PBMCs cells-releasing anti-programmed cell death ligand-1 (PD-L1) IgG4 for human ccRCC treatment in vitro and in an orthotopic NSG mice model in vivo. Using a 10e7 CAR PBMCs cells/ Kg dose, anti-CAIX CD28 CAR T cells releasing anti-PD-L1 IgG highly decrease both tumor volume and weight in vivo, avoiding the occurrence of metastasis. This antitumoral superiority of CD28-based CAR PBMCs cells compared to 4-1BB occurred under ICB via PD-L1. Furthermore, T cell exhaustion status in peripheral CD4 T cells, additionally to CD8 was critical for CAR T cells efficiency. The lack of hepatotoxicity and nephrotoxicity upon administration of 10e7 CAR PMBCs cells/Kg dose is the basis for carrying out clinical trials using anti-CAIX CD28 CAR PBMCs cells releasing anti-PD-L1 antibodies or anti-CAIX 4-1BB CAR T cells, offering exciting new prospects for the treatment of refractory ccRCC and hypoxic tumors.

The cattle sector is strategic sector for both the economic development and food security of Africa. However, the low availability and quality of forage puts the most vulnerable population in the field at risk. Hybrid forages have proven to be a real alternative for enhancing both the food security and sustainability of the sector. They are the product of genetic improvements and combine the superior traits of different materials. In 1987, the International Center for Tropical Agriculture (CIAT) began this line of research and together with the private sector various ma-terials have been released until today. Despite their beforementioned potential, forage hybrid adoption levels are still low in Africa, which is related to various factors among which the availability of seeds and planting material stands out. This document analyzes the potential markets for new forage hybrids adapted to the environmental conditions of eastern Africa and partially western Africa. Likewise, an estimation of the commercial value of these markets is provided. The results show a potential market of 414,388 ha for new interspecific hybrids of Urochloa and 528,409 ha for potential hybrids of Megathyrsus maximus, with approximate values of 73.5 and 101.1 million dollars, respectively. Ethiopia, Tanzania, and Kenya have a 70% market share for Urochloa, while South Sudan, Ethiopia, and Tanzania have a 67% share for Megathyrsus maximus. The results will help different actors in decision-making, i.e., regarding private sector investments in forage seed commercialization or public sector incentives supporting adoption processes, and thus contribute to increasing food security and sustainability in the region.

We have evaluated the antihypertensive effect of several flavonoid extracts in the spontaneous hypertensive rat model (SHR). Treatments were carried out for 6 and 12 weeks in two groups of SHR rats which received Apigenin, Lemon Extract, Grapefruit + Bitter Orange (GBO) extracts and Cocoa extract. Captopril was used as a positive control in the SHR group treated for 6 weeks (SHR6) and Diosmin was used as the industry reference in the SHR group treated for 12 weeks (SHR12). Captopril and GBO extracts significantly reduced the elevated blood pressure of the SHR6 animals, but none of the extracts was effective in the SHR12 group. Apigenin, LE, GBO and captopril also ameliorated nitric oxide-dependent and independent aortic vascular relaxation and elevated plasma and urinary excretion of nitrites, only in the SHR6 group. Kidney and urinary TBARS were also significantly reduced by GBO in the SHR6 rats. Apigenin also improved vascular relaxation in the SHR12 group and all the flavonoids studied reduced urinary TBARS excretion and proteinuria. Vascular abnormalities such as lumen/wall ratio in coronary arteries and thoracic aorta were moderately improved by these treatments in the SHR6 group. In conclusion, the flavonoids included in this study, especially apigenin, LE and GBO improved vascular vasodilatory function of young adult SHRs but only the GBO-treated rats benefited from a reduction in BP. These extracts may be used as functional food ingredients with a moderate therapeutic benefit, especially in the early phases of arterial hypertension.

1) Background: we have evaluated the antihypertensive effect of several flavonoid extracts in a rat model of arterial hypertension caused by chronic administration (6 weeks) of the nitric oxide synthesis inhibitor, L-NAME. 2) Methods: Sprague Dawley rats received L-NAME alone or L-NAME plus flavonoid-rich vegetal extracts (Lemon, Grapefruit + Bitter Orange, and Cocoa) or purified flavonoids (Apigenin and Diosmin) for 6 weeks. 3) Results: L-NAME treatment resulted in a marked elevation of blood pressure, and treatment with Apigenin, Lemon Extract, and Grapefruit + Bitter Orange extracts significantly reduced the elevated blood pressure of these animals. Apigenin and some of these flavonoids also ameliorated nitric oxide-dependent and independent aortic vasodilation and elevated nitrite urinary excretion. End-organ abnormalities such as cardiac infarcts, hyaline arteriopathy and fibrinoid necrosis in coronary arteries and aorta were improved by these treatments, reducing the end-organ vascular damage. 4) Conclusions: the flavonoids included in this study, specially apigenin, may be used as functional food ingredients with potential therapeutic benefit in arterial hypertension.

Clopidogrel, a prescription drug to reduce ischemic events in cardiovascular patients, has been extensively studied in mostly European individuals but not among Caribbean Hispanics. This study evaluated the low abundance and reduced activity of paraoxonase-1 (PON1) in clopidogrel-resistant patients as a predictive risk biomarker of poor responders and disease severity in this population. Thirty-six patients on clopidogrel (cases; divided into poor and normal responders) were enrolled along with 11 cardiovascular patients with no clopidogrel indications (positive control) and 13 healthy volunteers (negative control). Residual on-treatment platelet function (PRU), PON1 abundance by western blotting, and PON1 activity by enzymatic assays were measured. PON1 genotyping and computational haplotype phasing were performed for two genetic loci (rs662 and rs854560). No statistical differences in mean relative PON1 abundance were found among the groups (p&gt; 0.05). However, a significantly lower enzymatic activity was found in poor responders (10.57 6.79 µU/mL) when compared to controls (22.66 8.30 µU/mL and 22.21 9.66 µU/mL; p= 0.004). PON1 activity among carriers of the most prevalent PON1 haplotype (AA|AA) was significantly lower than in wild-types (7.90 µU/mL vs 22.03 µU/mL; p= 0.005). Our findings suggested that PON1 is a potential biomarker of cardiovascular disease severity in Caribbean Hispanics.

Development of biomarkers of analytes with interest in clinic is an important field of study. In this work, we synthesized and analyzed the new fluorescent acetate-biomarker, Iso-PG. The mechanism of detection is the acetate buffer mediated proton transfer reaction. The rate constants involved were obtained, and we measured the change in the fluorescence lifetime produced as a consequence of the presence of acetate in the medium. Finally, we checked its potential use as acetate biomarker in synthetic serum

At least 15% of the population in the world has some type of disability. Unfortunately, this population has the problem of facing various accessibility barriers, to which technological barriers are also added. One of the most relevant obstacles is the one that arises as a result of the development of the technology itself when using the Information and Communication Technologies (ICT). Therefore, the objective of this article is to review the main uses of the Semantic Web tools and to group them together in order to be able to propose the design and construction of more personalized and flexible systems, which allows to help people with disabilities to perform some type of activity using ICT, in this way, knowledge can be modeled in different domains related to people who have some type of disability, using ontologies, and some ontological models can be reused for various types of disability depending on the case study. The usefulness of this study is to reveal that with the models presented, it is possible to construct a Meta ontology that includes some or all areas of disability.

Cassava (Manihot esculenta Crantz) is a crop of nutritional and economic importance worldwide, cultivated in more than 100 tropical and subtropical countries including Ecuador, traditionally cultivated in its three continental regions: the Amazon, the Coast and in the valleys of the Sierra. The purpose of this study was to characterize 195 accessions from INIAP's Ecuadorian cassava collection through 1) morphological characterization with qualitative and quantitative descriptors; and 2) ecogeographic characterization to know the climatic, geophysical and edaphic conditions in which cassava grows and which environments are frequent or marginal for its cultivation. For the morphological characterization, 27 morphological descriptors were used (18 qualitative and nine quantitative), and for the ecogeographic characterization, 55 variables (41 climatic, two geophysical and 12 edaphic). As a result, four morphological groups and three ecogeographic groups were identified. In the research, morphological variability was evidenced, mainly in descriptors related to the leaf, stems and inflorescences. In addition, it was possible to identify accessions that can adapt to extreme conditions of drought and poor soils, which could be used for improvement.

This study assesses coastal flooding extension mapping based on two innovative approaches. The first is based on the coupling of two robust numerical models (SWASH and LISFLOOD), in this case, discharges were extracted from the wave overtopping results from SWASH 1D and set as boundary conditions for LISFLOOD on the crest of an existing seawall where overtopping typically occurs. The second, hereby called the ‘Tilted Bathtub Approach’ (TBTA), is based on wave run-up levels and buffering the affected area of a prior flooding event, adjusting it for expected sea-states according to different return periods. The proposed approaches are applied to a case study on the Northern Portuguese coast, at Furadouro beach, in the municipality of Ovar, which has been facing multiple flooding episodes throughout recent years, including a dramatic storm in February 2014. This event was used as validation for the proposed methods. A 30 years long hourly local wave climate time series was used both to perform an extreme value analysis in order to obtain expected sea-states according to different return periods, and also for performing a sensitivity test for established empirical formulas to estimate wave run-up at this particular case. Results indicate both approaches are valuable: they yield coherent flood extension predictions that align well with the real inundated area from the 2014 storm. The convergence of these findings underscores the potential for these methods in future coastal flood risk assessment and planning.

Currently, there are many studies on the application of nanotechnology in therapy. Metallic nanoparticles are promising nanomaterials in cancer therapy, however, functionalization of these nanoparticles with biomolecules has become relevant as their effect on cancer cells is con-siderably increased by photothermal and photodynamic therapy, drug nanocarriers, and speci-ficity by antibodies, resulting in new therapies that are more specific against different types of cancer. This review describes studies on the effect of functionalized palladium, gold, silver and platinum nanoparticles in the treatment of cancer.

Avipoxvirus (APV), a linear dsDNA virus belonging to the subfamily Chordopoxvirinae of the family Poxviridae, infects more than 278 species of domestic and wild birds. It is responsible for causing the avian pox disease, which is characterized by its cutaneous and diphtheric forms. With a high transmission capacity, it can cause high economic losses and damage to the ecosys-tem. Several diagnostic methods are available and vaccination of birds can be an effective pre-ventive measure. To update the molecular characterization and phylogenetic analysis of viruses isolated in Portugal between 2017 and 2023, ten APV-positive samples were analyzed. A P4b gene fragment was amplified by PCR and the nucleotide sequence of the amplicons was deter-mined by Sanger sequencing. The sequences obtained were aligned using ClustalW, and a max-imum likelihood phylogenetic tree was constructed. With this study, it was possible to verify that the analyzed sequences are distributed in subclades A1, A2, B1, and B3. Since some of them are quite similar to others from different countries and obtained in different years, it is possible to conclude that there have been several viral introductions in Portugal. Finally, it was possible to successfully update the data on avipoxviruses in Portugal.

The present study aimed to characterize the microstructure of a temporary 3D printing resin (Resilab Temp), evaluating the optical properties and mechanical behavior according to different post-processing curing times. For the analysis of the surface microstructure and establishment of the best printing pattern, samples in bar format following ISO 4049 (25 x 10 x 3 mm) were designed in CAD software (Rhinoceros 6.0), printed on the W3D printer (Wilcos), and light-cured in Anycubic Photon at different times (without curing, 16 minutes, 32 minutes, and 1 hour). For the structural characterization, analyses were carried out in FTIR (Fourier Transform Infrared Spectroscopy) and Scanning Electron Microscopy (SEM). The mechanical behavior of the resin was based on flexural strength tests and Knoop microhardness. Color and translucency analysis were performed with a spectrophotometer (VITA Easy Shade Advanced 4.0), which was evaluated following CIELab, using gray, black, and white backgrounds. All analyses were performed immediately after making the samples and repeated after thermal aging with 2 thousand cycles (5-55 °C). The results obtained were statistically analyzed with a significance level of 5%. FT-IR analysis showed about a 46% degree of conversion on the surface and 37% in the center of the resin sample. The flexural strength was higher for the groups polymerized for 32 min and 1h, while the Knoop microhardness did not show a statistical difference between the groups. Color and translucency analysis also did not show statistical differences between groups. According to all the analyses carried out in this study, for the evaluated material, the post-polymerization time of 1 hour can be suggested to improve the mechanical performance of 3D-printed devices.

Reducing office buildings’ energy consumption can contribute significantly towards carbon reduction commitments since it represents 10% of total energy consumption. Major components are lighting (40% of consumption), electrical equipment (35%), and heating and central cooling systems (25\%). Occupants’ behaviours impact these energy consumption components, with solid evidence on the role of individual behaviours. In this work, we propose a methodology that uses virtual choreographies to identify and prioritize behaviour-change interventions towards office users based on the potential impact on energy consumption. The data shows that some behaviours with significant consumption have little potential for behavioural change impact, while other behaviours hold substantial potential for lowering energy consumption via behavioural change.

Cancer cell lines are widely used as in vitro models of tumorigenesis, facilitating fundamental discoveries in cancer biology and translational medicine. Currently, there are few options for glioblastoma (GBM) treatment and limited in vitro models with accurate genomic and transcriptomic characterization. Here, a detailed characterization of a new GBM cell line, namely AHOL1, was conducted in order to fully characterize its molecular composition based on its copy number alteration (CNA) and transcriptome profiling, followed by the validation of key elements associated with GBM tumorigenesis. Large numbers of CNAs and differentially expressed genes (DEGs) were identified. CNAs were distributed throughout the genome, including gains at Xq11.1-q28, Xp22.33-p11.1, Xq21.1-q21.33, 4p15.1-p14, 8q23.2-q23.3 and losses at Yq11.21-q12, Yp11.31-p11.2 and 12p13.31 positions. Nine druggable genes were identified, including HCRTR2, ETV1, PTPRD, PRKX, STS, RPS6KA6, ZFY, USP9Y and KDM5D. By integrating DEGs and CNAs, we identified 57 overlapping genes enriched in fourteen pathways. Altered expression of several cancer-related candidates found in the DEGs-CNA dataset was confirmed by RT-qPCR. Taken together, this first comprehensive genomic and transcriptomic landscape of AHOL1 provides unique resources for further studies and identifies several druggable targets that may be useful for therapeutics and biologic and molecular investigation of GBM.

Background: The mental state is important in the health/illness process. Including stress, depression and anxiety. Nature immersion therapies have been implemented as a valid method for reducing these disorders. The aim will evaluate the effect of forest intervention therapies on levels of stress, depression, and anxiety. Methods: We searched for randomized clinical trials related to stress, anxiety and depression levels. Risk of bias was assessed according to the guidelines of the Cochrane Handbook for International Systematic Reviews. Results: We identified and synthesized eight publications. Two studies for cortisol showed significant differences between the pre-test and post-test levels in the intervention groups. One study including Natural killer cells, that reported a significant decrease in the intervention group compared to the control group. Two studies used the Stress Response Inventory, indicated a significant reduction in stress levels in the intervention group compared to the control group. Regarding Restorative Out-come Scale, no significant differences were found. Three studies were selected for the evaluation of anxiety and depression levels according to the Positive and Negative Affect Schedule. Four studies used The Profile of Mood States scale; no significant difference was observed. Conclusions: There is limited evidence to recommend forest bathing for reducing these disorders.

The red seaweed Asparagopsis armata exhibits a strong invasive behaviour and is included in the list of the “Worst invasive alien species threatening biodiversity in Europe”. This seaweed has been shown to produce a large diversity of halogenated compounds with effective biological effects, deeply affecting rockpool species. Therefore, the present study aimed to investigate the biochemical responses to sublethal concentrations of Asparagopsis armata exudate on two coastal organisms, the marine snail Gibbula umbilicalis and the rockpool shrimp Palaemon elegans. Antioxidant defences superoxide dismutase (SOD) and glutathione-S-transferase (GST), oxidative damage endpoints lipid peroxidation (LPO) and DNA damage, the neuronal parameter acetylcholinesterase (AChE), as well as the fatty acid profile were evaluated. Results revealed different metabolic responses between species, indicating that A. armata exudate affected the organisms through different pathways. Despite previous studies indicating that the exudate effected G. umbilicalis’ survival and behaviour, this does not seem to result from oxidative stress or addressed neurotoxicity. On the other hand, for P. elegans, an inhibition of AChE and the decrease of antioxidant capacity concomitant with the increase of LPO, suggests neurotoxicity and oxidative stress as mechanisms of exudate toxicity for this species. For fatty acids, there were different profile changes between species, also more pronounced for P. elegans with a general increase in PUFA with exudate exposure, which commonly means a defence mechanism protecting from membrane disruption. Nonetheless, the omega-3 PUFAs ARA and DPA were increased in both invertebrates, indicating a common mechanism regulation of inflammation and immunity responses to this stress. This work provides further insight on the mechanisms of invertebrate response and tolerance to an expanding coastal environmental stress as is the marine invader A. armata.

Objective: To map the literature pertaining to adult Person-Centered Rehabilitation (PCR).Data Sources: Following our previously published scoping review protocol, data were identified through: three major databases, snowball searches and expert consultation.Study Selection: Two independent reviewers identified English-language papers which addressed adult physical rehabilitation and met one or more of the six pre-defined inclusion categories for PCR content. Data Extraction: Two independent reviewers extracted key characteristics of included papers (e.g. aims, methods, participants). Quantitative methods (descriptive statistics, regression analysis) and qualitative content analyses were used to synthesize the results. Data synthesis: Of 5084 unique records initially screened, 145 papers were included: 111 empirical, including 11 systematic reviews. Empirical papers had data from 13498 clients and 3849 providers, in total. Yearly publications grew exponentially from 2000 to 2017 (r²= 0.65; p<0.01). Publications were unevenly distributed by countries (e.g. United States’ publications per population size was 45 times lower than New Zealand’s). Most papers focused in more than one profession, setting-type or health conditions, respectively 57.2%, 66.2%, and 60.7%. Finally, more than half of the empirical papers (53.2%) studied implementation of PCR approaches, including its effect. Conclusion: This scoping review synthesizes key characteristics and publication trends in the PCR literature, which is mainly empirical and growing exponentially over time. Stakeholders can use the identified trends, gaps, and literature map to guide further PCR research, and both clinical and organizational practices. The high prevalence of papers focused on multiple professions, settings-type, or health conditions reinforces the need for developing a transdisciplinary, trans-service model of PCR, which will be derived from a thematic analysis of this body of literature.

Cardiovascular disease (CVD) is one of the leading causes of death in Puerto Rico, where clopidogrel is commonly prescribed to prevent ischemic events. Genetic contributors to both a poor clopidogrel response and the severity of CVD have been identified mainly in Europeans. However, the non-random enrichment of single nucleotide polymorphisms (SNPs) associated with clopidogrel resistance within risk loci linked to underlying CVDs, and the role of admixture, has yet to be tested. This study aimed to assess possible interaction between genetic biomarkers linked to CVDs and those associated with clopidogrel resistance among admixed Caribbean Hispanics. We identified 50 SNPs significantly associated with CVDs in previous genome-wide association studies (GWAS). These SNPs were combined with another ten SNPs related to clopidogrel resistance in Caribbean Hispanics. We developed Python scripts to determine whether SNPs related to CVDs are in close proximity to those associated with clopidogrel response. Average and individual local ancestry (LAI) within each locus were inferred, and 60 random SNPs with their corresponding LAI were generated for enrichment estimation purposes. Our results showed no CVD-linked SNPs in close proximity to those associated with clopidogrel response among Caribbean Hispanics. Consequently, no genetic loci with a dual predictive role for risk of CVD severity and clopidogrel resistance were found in this population. Native American ancestry was the most enriched within risk loci linked to CVDs in this population. Non-random enrichment of disease susceptibility loci with drug response SNPs is a new frontier in Precision Medicine that needs further attention.

The goal of this study was to characterize the initial growth trajectory of Epicrates assisi, 1 Epicrates cenchria, and Epicrates crassus snakes raised in captivity. An exponential model with 2 parameters for birth weight (A) and growth rate (k) was fitted for each animal. There was a significant 3 difference A and k among the three species, the means (standard error) for A and k parameters were 4 31 (0.3) g and 0.0027 (0.00006) for E. assisi, 27.6 (0.6) g and 0.0046 (0.00013) for E. cenchria and 25.9 5 (1.4) g and 0.0033 (0.00027) for E. crassus. We showed a significative variability between species for 6 initial growth trajectory. In addition, we also demonstrated the existence of variability within species, 7 which can be used to change the growth trajectory of snakes, being a tool for selection and genetic 8 improvement.9

Deep-Brain Stimulation (DBS) is a a highly effective and safe medical treatment that improves the lives of patients with a wide range of neurological and psychiatric deceases, and has been consolidated as a first-line tool in the treatment of these conditionsin the last two decades. Closed Loop Deep-Brain Stimulation (CLDBS) pushes this tool further by automatically adjusting the stimulation parameters to the brain response in real time. In this context, this paper presents a Low-Noise Amplifier (LNA) and a Neurostimulator circuits fabricated in the low-power/low-voltage 65 nm CMOS process from the TSMC, which were designed targeting implantable applications. To achieve the best trade-off between input-referred noise and power consuption, metaheuristic algorithms were employed to determine and optimizes the dimentions of the LNA devices during the design phase. The measurement results showed that the LNA had a gain of 40.6 dB, a 3 dB bandwidth spanning over three decades from 10 Hz to 8.6 kHz, and a power consumption of 6.19 uW. Simulations results indicated an input-referred noise of 4.86 uVrms for the LNA. The circuit of the Neurostimulator is a programmable Howland Current-Pump, whose measurements showed its ability to generate currents with arbitrary shapes ranging from between 325 uA to +318 uA. The simulations showed a quiescent power consumption of 0.13 W with a zero neurostimulation current. The LNA and the Neurostimulator circuits are supplied with 1.2 V voltage and occupy a microdevice area of 145 um x 311 um and 88 um x 89 um, respectively, making them suitable for implantation in applications involving Closed Loop Deep-Brain Stimulation.

Introduction: An epidemic of Coronavirus Disease 2019 (COVID-19) begun in December 2019 in China, causing a Public Health Emergency of International Concern. Among raised questions, clinical, laboratory, and imaging features have been partially characterized in some observational studies. No systematic reviews have been published on this matter. Methods: We performed a systematic literature review with meta-analysis, using three databases to assess clinical, laboratory, imaging features, and outcomes of COVID-19 confirmed cases. Observational studies, and also case reports, were included and analyzed separately. We performed a random-effects model meta-analysis to calculate the pooled prevalence and 95% confidence interval (95%CI). Results: 660 articles were retrieved (1/1/2020-2/23/2020). After screening by abstract/title, 27 articles were selected for full-text assessment. Of them, 19 were finally included for qualitative and quantitative analyses. Additionally, 39 case report articles were included and analyzed separately. For 656 patients, fever (88.7%, 95%CI 84.5-92.9%), cough (57.6%, 40.8-74.4%) and dyspnea (45.6%, 10.9-80.4%) were the most prevalent manifestations. Among the patients, 20.3% (95%CI 10.0-30.6%) required intensive care unit (ICU), with 32.8% presenting acute respiratory distress syndrome (ARDS) (95%CI 13.7-51.8), 6.2% (95%CI 3.1-9.3) with shock and 13.9% (95%CI 6.2-21.5%) of hospitalized patients with fatal outcomes (case fatality rate, CFR).Conclusion: COVID-19 brings a huge burden to healthcare facilities, especially in patients with comorbidities. ICU was required for approximately 20% of polymorbid, COVID-19 infected patients and this group was associated with a CFR of over 13%. As this virus spreads globally, countries need to urgently prepare human resources, infrastructure, and facilities to treat severe COVID-19.

Despite being one of the most abundant elements in soil, phosphorus (P) often becomes a limiting macronutrient for plants due to its low bioavailability, primarily locked away in insoluble organic and inorganic forms. Phosphate solubilizing and mineralizing bacteria, also called phosphobacteria, isolated from P-deficient soils have emerged as a promising biofertilizer alternative, capable of converting these recalcitrant P forms into plant-available phosphates. Three such phosphobacteria strains - Serratia sp. RJAL6, Klebsiella sp. RCJ4, and Enterobacter sp. 198 - previously demonstrated their particular strength as plant growth promoters for wheat, ryegrass, or avocado under abiotic stresses and P deficiency. Comparative genomic analysis of their draft genomes revealed several genes encoding key functionalities, including alkaline phosphatases, isonitrile secondary metabolites, enterobactin biosynthesis and genes associated to the production of indole-3-acetic acid (IAA) and gluconic acid. Moreover, overall genome relatedness indexes (OGRIs) revealed substantial divergence between Serratia sp. RJAL6 and its closest phylogenetic neighbors, Serratia nematodiphila and Serratia bockelmanii. This compelling evidence suggests that RJAL6 merits classification as a novel species. This in silico genomic analysis provides vital insights into the plant growth-promoting capabilities and provenance of these promising PSRB strains. Notably, it paves the way for further characterization and potential application of the newly identified Serratia species as a powerful bioinoculant in future agricultural settings.

With the current technological transformation in the automotive industry, autonomous vehicles are getting closer to the Society of Automative Engineers (SAE) automation level 5. This level corresponds to the full vehicle automation, where the driving system autonomously monitors and navigates the environment. With SAE-level 5, the concept of a Shared Autonomous Vehicle (SAV) will soon become a reality and mainstream. The main purpose of an SAV is to allow unrelated passengers to share an autonomous vehicle without a driver/moderator inside the shared space. However, to ensure their safety and well-being until they reach their final destination, it is required an active monitoring of all passengers. In this context, this article presents a microphone-based sensor system that is able to localize sound events inside an SAV. The solution is composed of a Micro-Electro-Mechanical System (MEMS) microphone array with a circular geometry connected to an embedded processing platform that resorts to Field-Programmable Gate Array (FPGA) technology to successfully process in hardware the sound localization algorithms.

Many strategies have been developed for the synthesis of silicon carbide (SiC) thin films on silicon (Si) substrates by plasma-based deposition techniques, especially plasma enhanced chemical vapor deposition (PECVD) and magnetron sputtering, due to importance of these materials for microelectronics and related fields. A drawback is the large lattice mismatch between SiC and Si. The insertion of a thin aluminum nitride (AlN) buffer layer between them has been shown useful to overcome this problem. Herein, the high-power impulse magnetron sputtering (HiPIMS) technique was used to grow SiC thin films on AlN/Si substrates. Furthermore, the SiC films were also grown on Si substrates. Comparisons of the structural and chemical properties of SiC thin films grown on the two types of substrates allowed us to evaluate the influence of AlN buffer layer on such properties. The chemical composition and stoichiometry of the samples were investigated by Rutherford backscattering spectrometry (RBS) and Raman spectroscopy, while the crystallinity was characterized by grazing incidence X-ray diffraction (GIXRD). Our set of results evidenced the versatility of HiPIMS technique to produce polycrystalline SiC thin films at near room temperature only varying the discharge power. In addition, this study opens up a feasible route for the deposition of crystalline SiC films with a good structural quality using AlN buffer layer.

There are several challenges on how to attain energy efficiency while maintaining balance among factors affecting energy consumption such as power rating and temperature setpoints of cooling units, room temperature and humidity, and indoor air quality (IAQ). A real-time energy and IAQ monitoring system were installed in an educational building to profile the operational power consumption of inverter-based air condition unit (ACU) installed in each room. Polynomial curve and neural fitting regression analysis were applied to the real-time power consumption, indoor temperature and humidity, and carbon dioxide (CO2) level data. The derived models were able to provide the stabilizing indoor thermal and air conditions of the room to reach steady state ACU power consumption. These collected data and calculated parameters can be used to define rules in automating control of cooling appliances for an efficient energy utilization. The regression approaches, using real-time data, have determined the influence of indoor heat conditions and carbon dioxide levels on ACU power consumption. These parameters were utilized to establish consistent values for temperature, humidity, and carbon dioxide levels under stable settings of inverter-based air conditioning units.

Melanoma is a type of highly malignant and metastatic skin cancer. In situ molecular imaging of endogenous levels of the melanoma biomarker tyrosinase (TYR) may decrease the likelihood of mortality. In this study we proposed the weakly fluorescent probe 1-(4-(2-(4-(dicyanomethylene)-4H-chromen-2-yl)vinyl)phenyl)-3-(4-hydroxybenzyl)urea (DCM-HBU), which releases a strong red-shifted fluorescent signal after a TYR-mediated oxidation followed by hydrolysis of the urea linkage. The large Stokes shift of the dye is owed to the recovery of the intramolecular charge transfer (ICT) effect. The resulting probe derivate shows a highly ratiometric fluorescence output. Furthermore, the simultaneous excitation by two near-infrared (NIR) photons of the released DCM-NH2 fluorophore could avoid the usual drawbacks, such as cellular absorption, autofluorescence and light scattering, due to an usually short wavelength of the excitation light on biological systems, resulting in images with deeper tissue penetration. In addition, the probe is useful for the quantitative sensing of TYR activity in vivo, as demonstrated in zebrafish larvae. This new ratiometric two photon NIR fluorescent probe is expected to be useful for the accurate detection of TYR in complex biosystems at greater depths than other one-photon excited fluorescent probes.

Background: While the clinical factors of the post-COVID-19 condition (PCC) are becoming clearer, the economic implications remain uncertain, posing a challenge to healthcare professionals in terms of understanding and managing this emerging phenomenon. This article aims to investigate the demographic and clinical characteristics of PCC patients and quantify the economic impact of their healthcare resource utilisation. Methods: A retrospective and case-control observational study was conducted, comparing the case group of PCC population before and after diagnosis with a control group. Demographic and clinical variables were analysed with the objective of describing the population. Economic analysis was performed to evaluate the resource costs in procedures and primary, secondary (both outpatient and inpatient) and emergency care. Findings: PCC patients (N=341) exhibited older age and elevated cardiovascular risk factors compared to controls (N=49,078). There were differences in the socio-economic distribution between male and female patients in the PCC patients. Hypertension and diabetes mellitus type 2 were the most common chronic diseases observed among the case patients. Economic analysis revealed that PCC patients were approximately four times as costly as control patients, with increased utilisation of healthcare resources. However, post-diagnosis PCC patients showed a reduction in costs, primarily driven by decreased primary care visits and hospitalisations. Conclusion: Coordinated care management for PCC patients is associated with reduced costs and improved healthcare resource utilisation. Further research is warranted to investigate long-term health outcomes and establish causal relationships between COVID-19 sequelae and healthcare resource utilisation.

To date, uncertainty remains about how long the protective immune responses against SARS-CoV-2 persists and reports of suspected reinfection began to be described in recovered patients months after the first episode. Viral evolution may favor reinfections, and the recently described spike mutations, particularly in the receptor binding domain (RBD) in SARS-CoV-2 lineages circulating in the UK, South Africa, and most recently in Brazil, have raised concern on their potential impact in infectivity, immune escape and reinfection. We report a case of reinfection from distinct SARS-CoV-2 lineages presenting the E484K mutation in Brazil, a variant associated with escape from neutralizing antibodies.

We have developed a family of N-alkyl-nitrobenzamides that exhibit promising antitubercular ac-tivities. These compounds are a simplification of the structure of known inhibitors of DprE1, an essential Mtb enzyme and an emergent anti-TB target. The compounds were obtained by a simple synthetic methodology and their antitubercular, cyto-toxicity and stability were studied. The most active compounds were the 3,5-dinitro and the 3-nitro-5-trifluoromethyl derivatives. Lipophilicity was shown to be a main parameter modulating activity within each family. The most active compound presented MIC of 16 ng/mL and had in-termediate lipophilicities. The activity was also studied in a macrophage model of infection. In this model the compounds with chain lengths of 6 and 12 carbon atoms presented the best results, ex-hibiting activity profiles comparable to isoniazid. Docking studies performed suggested that the fit of our highly active compounds to the DprE1 binding pocket was very similar to the literature compounds. Furthermore, the metrics used in the analysis were able to distinguish between the families of the highly and least active compounds. Assessment of susceptibility over multiple species and computational together with the structure of the compounds are complementary information that supports DprE1 as a likely target of action for this type of compounds.

Resumo: Este estudo teve como objetivo avaliar a Saúde Mental Positiva (SPM) e a sua relação com características sociodemográficas, literacia em saúde mental e escala de vulnerabilidade psicológica (PVS) em estudantes universitários portugueses com idades compreendidas entre os 17 e os 62 anos. Foi realizado um estudo descritivo-correlacional. Uma pesquisa online foi realizada para avaliar variáveis ​​demográficas, e vários questionários foram aplicados para avaliar saúde mental positiva, vulnerabilidade psicológica e alfabetização em saúde mental. Os dados foram coletados de 1º de novembro de 2019 a 1º de setembro de 2020. No geral, 3.405 alunos participaram do estudo. Os resultados mostram que 67,8% dos alunos revelaram um alto nível de PMH, 31,6% apresentaram um nível médio de PMH e 0,6% apresentaram um nível baixo de PMH. Os estudantes do sexo masculino relataram maior satisfação pessoal (t (3170) = -2,39, p=0,017) e autonomia (t (3170) = -3,33, p=0,001), no PMH em relação ao sexo feminino. Alunos sem bolsa pontuaram mais alto (t (3.127) = -2,04, p=0,42) no PMH do que alunos com bolsa. Estudantes que não foram deslocados de casa relataram maior (t (3170) = -1,99, p=0,047) Autocontrole em PMH do que aqueles deslocados de sua casa. Estudantes universitários com resultados de PMH mais altos têm resultados de PVS mais baixos e resultados de Alfabetização mais altos. Os achados deste estudo contribuirão para identificar as necessidades de intervenção dos alunos na PMH. Estudantes universitários com resultados de PMH mais altos têm resultados de PVS mais baixos e resultados de Alfabetização mais altos. Os achados deste estudo contribuirão para identificar as necessidades de intervenção dos alunos na PMH. Estudantes universitários com resultados de PMH mais altos têm resultados de PVS mais baixos e resultados de Alfabetização mais altos. Os achados deste estudo contribuirão para identificar as necessidades de intervenção dos alunos na PMH.

BACKGROUND: Head and Neck Sarcomas (HNSs) are rare malignant tumors derived from mesenchymal cells characterized by rapid growth, local aggressive behavior, and multiple re-lapses. The Rhabdomyosarcoma (RMS) and the Osteosarcoma (OS) are the more frequent HNS. The present study aims to evaluate the clinical impact of multimodal treatment in patients diagnosed with HNS. METHODS: A retrospective analysis of medical records from patients diagnosed with HNS multimodal treated, four groups were formed: a) surgery and chemotherapy (CTX); b) surgery, CTX, and RT; c) surgery and RT; d) CTX and RT exclusively. The overall survival (OSS), disease-free survival (DFS) and progression-free survival (PFS) rates were calculated using the Kaplan-Meier test. RESULTS: Among 39 patients, 23.1% were diagnosed with RMS , 66.7% with OS and 10.3% with other subtypes of HNS. Moreover, 59% showed initial clinical staging (T1/T2) and of those 35.9% were T1. Surgery was performed in 87.2% patients, RT in 35.9% and CTX in 84.7%. RT performed showed not statistically significant clinical role regarding OSS (p=0.74), DFS (p=0.09) and PFS (p=0.90) rates independent of histological subtype. Finally, OSS (p=0.89), DFS (p=0.13) and PFS (p=0.50) rates were not statistically different for patients treated with monotherapy or multimodal therapy. CONCLUSION: RT has not showed a clinically important role referred to improve OSS, DFS and PFS rates in patients with HNS, regardless of the histological subtype of the primary tumor. Multimodal treatment could influence in survival rates and locoregional control of the disease; however, longitudinal studies such as randomized clinical trials must be conducted.

The paper focuses on the application of a multilevel, integrative and territorial approach to the protection of cultural heritage through planning instruments in Serbia. It points out the problems of the sectoral approach and discusses international recommendations that can be integrated into the planning methodology. The case study is the area of Djerdap National Park, which has an already established international and national importance. The research suggests that the cultural heritage in the area, with the exception of the Roman limes, is still recognized at the level of individual localities. The study emphasizes the importance of aligning all levels of governance to safeguard the whole spatial entity rather than focusing solely on its particular areas. The interna-tional and national importance of the planning area contributes to the strengthening of awareness of heritage and its institutional protection. However, the vitality of the area, which is key to its sustainable development, comes from the local level. Planning documents contribute to the inte-gration of local values and local communities into development programs and projects.

The Amazon region has the most incredible diversity of freshwater stingrays; however, there are still places where information about this group is scarce. The present work aims to record the occurrence of freshwater stingrays in the Uatumã river basin, Amazonas, Brazil. For this, collections were carried out in three municipalities bathed by the Uatumã River, Presidente Figueiredo, Itapiranga and São Sebastião do Uatumã. The rays were collected through fishing using a hand net and, after capture, were identified through the pattern of the dorsal and ventral color of the disc, the absence or presence of the labial groove and the organization of the row of spines on the tail, too were also measured, weighed and sexed. In total, 69 specimens of Potamotrygonines were captured, 59 of which were from the genus Potamotrygon and ten individuals from the genus Paratrygon. The present study provides preliminary information on the characteristics of freshwater stingray species that may occur in the Uatumã River. Furthermore, new research is necessary to improve the identification of specimens to determine the diversity and elucidate aspects related to the biology of elasmobranchs in the Uatumã River Basin, Brazil.

With the growing hope that disease-modifying treatments could target the molecular basis of neurodegenerative diseases even before the onset of symptoms, there is mounting pressure to define disease entities based on pathophysiology rather than on clinical syndromes. The Alzheimer’s disease research community has recently transitioned from diagnostic criteria based on an amnestic syndrome to a purely biomarker-based disease definition, relying on the demonstration of amyloid-beta pathology, tau pathology, and neurodegeneration. In contrast, current diagnostic criteria for Parkinson’s disease still rely on the presence of the well-described clinical syndrome of parkinsonism, with the addition of characteristic motor- and non-motor signs and symptoms. However, there is now unequivocal evidence that Parkinson’s disease starts years before the onset of parkinsonism. Furthermore, neuropathologically defined Lewy body disease is clinically heterogeneous, combining a range of motor, non-motor, dopaminergic and non-dopaminergic features. Finally, clinically defined Parkinson’s disease has diverse underlying etiologies most, but not all, associated with α-synuclein positive Lewy pathology. In light of recent scientific advances, we propose a biologically based definition for the diagnosis of Parkinson's disease, initially to be used for research purposes. The criteria use a three-component ‘G-S-N’ system. The first is documentation of defined gene variants (‘G’), which cause or strongly predispose to PD as the most upstream component. The second is α-synuclein pathology (‘S’), currently defined as pathological α-synuclein deposition in tissue or positive α-synuclein seeding assays. The third is evidence of underlying neurodegeneration (‘N’), currently defined by specific neuroimaging procedures. The associated clinical syndrome (‘C’) is defined by a single high-specificity feature or multiple lower-specificity features. Initiating this transition will enable the field to fuel both basic and clinical research and move closer to the precision medicine required to develop clinically meaningful disease-modifying therapies. We acknowledge current limitations, ethical implications, and the need for prospective validation of this approach.

Glycosidic linkage analysis was conducted on the unfractionated polysaccharides in the alcohol-insoluble residues (AIRs) prepared from six red seaweeds (Gracilariopsis sp., Prionitis sp., Mastocarpus papillatus, Callophyllis sp., Mazzaella splendens, and Palmaria palmata) using GC-MS/FID analysis of partially methylated alditol acetates (PMAAs). The cell walls of P. palmata primarily contained mixed-linkage xylans and small amounts of sulfated galactans and cellulose. In contrast, the unfractionated polysaccharides of the other five species were rich in galactans displaying diverse 3,6-anhydro-galactose and galactose linkages with varied sulfation patterns. Different levels of cellulose were also observed. This glycosidic linkage method offers advantages for cellulose analysis over traditional monosaccharide analysis that is known for underrepresenting glucose in crystalline cellulose. Relative linkage compositions calculated from GC-MS and GC-FID measurements showed that anhydro sugar linkages generated more response in the latter detection method. This improved linkage workflow presents a useful tool for studying polysaccharide structural variations across red seaweed species. Furthermore, for the first time, relative linkage compositions from GC-MS and GC-FID measurements, along with normalized FID and total ion current (TIC) chromatograms without peak assignments, were analyzed using principal component analysis (PCA) as a proof-of-concept demonstration of the technique's potential to differentiate various red seaweed species.

Background: Educating college students about the importance of good sleep habits could lead to the adoption of healthier sleep routines, including sufficient sleep duration and sleep quality. The current pre-post study examines the impact of completing a sleep education program called “Sleep 101” on (1) sleep hygiene practices, (2) sleep quality, and (3) weekday and weekend sleep behaviors among college students. “Sleep 101” is an interactive online course developed to educate college students about the importance of sleep by addressing basic sleep physiology, the impact of sleep on mood, academic and physical performance, the interactions between sleep and various substances, and common sleep disorders. Methods: 338 college students were recruited from a midsized public university in the US and invited to participate in “Sleep 101”, of which 25 participants completed the baseline and post-intervention questionnaire. The Sleep Hygiene Index (SHI) was utilized to evaluate sleep hygiene practices, while standard questions were employed to assess weekday and weekend sleep behaviors and overall sleep quality. Results: Those who completed the study demonstrated a significant increase in weekday sleep duration and were less likely to engage in negative prior bedtime activities. In addition, 40% of those who completed baseline and post-intervention assessments noticed improvements in their sleep quality. Conclusion: These findings suggest that a brief online program is beneficial in improving sleep behaviors among college and could be a scalable approach to addressing current sleep issues and preventing future sleep problems in college students.

The profile of secondary metabolites occurring in apple cuticular layer is not only characteristic for particular apple cultivar, but also dynamically reflects various external factors in growing environment. In this study, the possibility to authenticate apple samples based on analysis of their cuticular layer extracts was investigated. Ultra-high-performance liquid chromatography coupled to high resolution tandem mass spectrometry (UHPLC-HRMS/MS) was employed for obtaining metabolomic fingerprints. In total, 274 authentic apple samples, four cultivars harvested within the seasons 2020 to 2022 in the Czech Republic and Poland were analysed. The generated complex data processed by univariate and multivariate statistical methods enabled to build classification models for discrimination of apple cultivars as well as their geographical origin. The models showed very good performance in differentiation of Czech and Polish samples for three of four cultivars: ‘Gala’, ‘Golden Delicious’ and ‘Idared’, moreover, the validity of the models was verified over harvest seasons. The diagnostic markers, besides metabolites of triterpene biosynthetic pathway, mainly represented wax esters. ‘Jonagold’, which is known to be susceptible to mutations, was the only cultivar for which the unambiguous classification of geographical origin was not possible.

Strawberry root rot caused by Neopestalotiopsis clavispora is one of the main diseases of strawberry and significantly impacts the yield and quality of strawberry fruit. There are now no effective control techniques available except for fungicide sprays, which may directly impact consumers. Biological control is becoming an alternative method for the control of plant diseases to replace or decrease the application of traditional synthetic chemical fungicides. Trichoderma is widely used as a biological agent for controlling strawberry root rot. In order to provide resources for screening the highly effective biocontrol fungus for controlling strawberry root rot caused by Neopestalotiopsis clavispora, the biocontrol mechanism,the control effects of Trichoderma asperellum CMT10 against strawberry root rot and growth-promoting effects on strawberry seedlings were investigated by plate culture, microscopy observation and root drenching methods.The results showed that CMT10 had obvious competitive, antibiotic and hyperparasitism effects on Neopestalotiopsis clavispora CMGF3. The CMT10 could quickly occupy nutritional space, and the inhibition rates of CMT10 against CMGF3 in confrontation culture on 7 d was 65.49%. The inhibition rates of volatile metabolite and fermentation metabolite produced by CMT10 against CMGF3 were 79.67% and 69.84%, respectively. The mycelium of strain CMT10 can act as hyperparasites by making contacting, winding and penetrating hyphae of CMGF3. Pot experiment showed that the biocontrol efficacy of CMT10 on strawberry root rot caused by Neopestalotiopsis clavispora was 63.00%. CMT10 had obvious promotion effect on strawberry growth, the plant height, root length, total fresh weight, root fresh weight, stem fresh weight and root dry weight, with the promotion rates were 20.09%, 22.39%, 87.11%, 101.58%, 79.82% and 72.33%, respectively. Overall, this study showed the ability of Trichoderma asperellum CMT10 to control strawberry root rot and their potential to develop as novel biocontrol agents to replace chemical fungicides for eco-friendly, sustainable agriculture.

Apis mellifera, especially weak ones, are highly vulnerable to Carpoglyphus lactis mites, which can rapidly infest and consume stored pollen, leading to weakened colonies and potentially colony collapse. This study aimed to ascertain and investigate the prevalence of this mite in honeybee colonies across 9 provinces in the Republic of Korea (ROK). A total of 615 honeybee colonies were collected, from 66 apiaries during the spring and 58 apiaries during the summer of 2023. A 1,242 bp segment of the the Cytochrome c oxidase subunit 1 (COI) gene was amplified using the polymerase chain reaction method. The detection levels of C. lactis in the honeybees were compared between winter and summer. Based on the COI sequence analysis, the nucleotide sequence similarity of C. lactis mites isolated in the ROK with those from China (NC048990.1) was found to be 99.5%, and with those from the United Kingdom (KY922482.1) was 99.3%. This study is the first report of C. lactis in Korean apiaries. The findings in this study demonstrate a significantly higher detection rate in winter, which is 4.1 times greater than that in summer (p &lt; 0.001). Furthermore, the results underscore the usefulness of molecular diagnostic techniques for detecting C. lactis mites.

COX II containing a dual core CuA active site is one of the three core subunits of mitochondrial Cco, which plays a significant role in the physiological process. In this report, the full-length cDNA of COXⅡ gene was cloned from Sitophilus zeamais, which had an ORF of 684 bp encoding 227 amino acids residues. The predicted COXⅡ protein had a molecular mass of 26.2 kDa with pI value of 6.37, and multiple sequence alignment and phylogenetic analysis indicated that Sitophilus zeamais COXⅡ had high sequence identity 78.51% with the COXⅡ of other insect species, especially similarity to sitophilus oryzae. This gene was subcloned into the prokaryotic expression vector pET-32a, and induced by IPTG in E.coli Transetta (DE3) expression system. Finally the COXⅡ with 6-His tag was purified using affinity chromatography with Ni²⁺-NTA agarose. WB showed the recombinant COXⅡ was about 44 kD, and the concentration of fusion protein was 50μg/mL. UV-spectrophotometer and infrared spectrometer analysis showed that recombinant COXⅡ could catalyze the oxidation of substrate Cytc, and influenced by AITC. It was found that AITC could form a hydrophobic region with COXⅡ protein via molecular docking, besides, a sulfur atom of AITC structure could form a length of 2.9 Å hydrogen bond with Leu-31. These results will provide valuable information for elucidating the role of COXⅡ in Sitophilus zeamais responses to AITC, meanwhile, it will helpful to carry out a point mutation in AITC binding sites for the future research.

The properties of the annual, semiannual and triennial oscillations (AO, SAO and TO) in the middle atmosphere have been investigated using the TIMED/SABER temperature data. The Lomb-Scargle and wavelet spectra were used to determine the dominant oscillations in the background temperature field. The AO is prominent at the mid-latitudes. The AO amplitudes present an asymmetry between the two Hemispheres, being larger in the mesosphere than in the stratosphere. The SAO dominates the tropical regions, with three amplitude maxima at altitudes of 45, 75, and 85 km. The SAOs in the upper mesosphere (75 km) are out of phase with those in the mesopause (85 km) in the tropical regions, which can generate an enhancement of 11 K at each equinox, contributing to the lower mesospheric inversion layer. The TO is significant in the tropical region, with amplitude being maximum at 35, 45 and 85 km. Result shows that there may be potential interaction by the TO with SAO at 85km at the equator. The relation between ENSO and TO has also been discussed. The ENSO signal may modulate the amplitude of the TO, mainly in the lower stratosphere. The real origin of the TO may lie in the wave-mean-flow interaction.

This paper is focused on typical rural settlements in the Stara Planina Mountain area in Serbia. They are distinguished by their authenticity, identity and character, and they have still not been destroyed by inappropriate development as is the case in some other mountain areas in Serbia, where the effects of urbanization, globalization and homogenization are obvious. Consequently, there is a need to prevent these effects in mountain areas where there is a threat of disbalance between development and the inherited natural and cultural values. The paper starts from several important concepts that relate contemporary approaches to cultural heritage preservation, place morphology and planning future development. The concept definitions from recent documents from related fields are used. These concepts are then applied to the area of Stara Planina Mountain and its rural settlements. The necessity for an integrative approach to planning this area with significant natural and anthropogenic potential is pointed out, including its integration into international programs of sustainable development.

Piperine, an active plant alkaloid from black pepper (Piper nigrum), has several pharmacological effects: antioxidant, anti-inflammatory and immunomodulatory, which involves inhibiting molec-ular events associated with various stages of cancer development. The aim of this study was to investigate the molecular mechanisms of action of piperine in relation to its potential anticancer effect on head and neck cancer cells. Parameters related to neoplastic potential, analysis of cyto-kine, protein and gene expression were investigated in the head and neck cancer cell lines (HEp-2 and SCC-25) treated with piperine. The results of the tests indicated that piperine modified mor-phology, inhibited viability and the formation of cell colonies. Piperine promoted genotoxicity by triggering apoptosis and cell cycle arrest in G2/M and S. A decrease in cell migration was also observed, and decreased expression of MMP2/9 genes. Piperine also reduced the expression of inflammatory molecules (PTGS2 and PTGER4), regulated the secretion of cytokines (IF-y and IL-8) and modulated the expression of ERK and p38. These results suggest that piperine exerts anti-cancer effects on tumor cells, and could be a promising natural treatment by regulating signaling pathways associated with head and neck cancer.

Promoting green development has become an important way to optimize the ecological and economic structure and promote sustainable development. The Yangtze River Economic Belt is an important economic corridor in China, and it remains to be examined whether the implementation of environmental regulations has enhanced the green total factor productivity (GTFP) of cities. This paper calculates the green total factor productivity of 107 cities within the Yangtze River Economic Belt by using the super-efficient SBM model and the GML index with Chinese city panel data from 2007-2019 and measures the intensity of environmental regulations through textual analysis. The bidirectional fixed-effects model constructed in this paper suggests an inverted U-shaped relationship between environmental regulation and GTFP, which is confirmed by a series of robustness tests. Green technology innovation and advanced industrial structure play a mechanism role in this. In regions with lower levels of green technology and industrial structure, the inverted U-shaped relationship between environmental regulation and green total factor productivity is more significant. In addition, the phenomenon of GTFP rising and then falling because of environmental regulation is more obvious in cities in the middle and upper reaches of the Yangtze River and outside the urban agglomerations. Therefore, when formulating environmental regulation policies, it is necessary to balance the relationship between economic development and environmental protection and harmonize the environment and economic development of the entire Yangtze River Basin.

The wetlands in northeastern Bangladesh are home to some of the most prolific and valuable ecosystems on the planet, offering a wide range of benefits to both the local and wider communities. A limited number of research on this topic have been carried out in various wetlands in coastal hilsa, but none have been located in the northeastern region of Bangladesh. Thus, the goal of this study was to better understand the most commercially relevant species (anadromous hilsa) in northeastern Bangladesh as well as to assess the wetland ecosystem services more thoroughly with the contribution of their fish genetic resources. In addition to laboratory studies, fieldwork was done in the fishing settlements along the Surma River, Hakaluki Haor, and Tanguar Haor. The study classified 77 fish species into 21 subcategories of ecosystem services, of which 56% were not threatened, 17% were vulnerable, and 10% were highly endangered. The species Hilsa was found to be the most economically significant, accounting for 1% of the GDP overall. The study determined if the hilsa stock of the examined wetlands maintains a single or several subpopulations in comparison to other parts of the country when they migrate from saline water to northeastern Bangladesh (freshwater). But when compared to other groups, the FST score was between 0.000 to 0.017, indicating that the populations are identical and that there is genetic material sharing between them. Additionally, these statistics imply that the Sylhet haor and adjacent river systems contain a single stock of Hilsa fish. Nevertheless, a number of stresses and risks, including overexploitation, illicit and destructive fishing, siltation, and natural disasters like flash floods, have been linked to changes in the supply of hilsa and other ecosystem services. This study also emphasizes the necessity of policy attention and research to address the concerns.

In this paper, we introduce a specialized, fully automated experimental arrangement designed for assessing the effectiveness of augmented and virtual reality technologies in healthcare setting and explore its design principles focusing on depth sensor characterization. The main goal of this project is to establish a robust benchtop platform for the quantitative evaluation of extended reality technologies in a controlled environment, emphasizing the practical assessment of augmented reality head-mounted devices. We outline a design concept and considerations for an experimental configuration aimed at creating a realistic testing environment. This apparatus comprises an observation platform mounted on a three-degree-of-freedom motorized system and a test phantom stage. Focusing on real-case scenarios, we utilized a range of sensors, including readily available range-sensing cameras and commercial augmented reality headsets, such as the Intel RealSense L515 LiDAR camera, mounted on the motion control system. The setup enabled automated data collection and facilitates controlled assessments and validation of various facets of augmented reality technologies, including object, hand, and head tracking, as well as static and dynamic image registration. This paper describes the system architecture, the process of automated data collection, and presents several evaluation studies conducted with this setup, providing insights into the quality and temporal noise associated with static or moving objects or observers in augmented reality applications.