Sepsis is a life-threatening condition caused by a dysregulated host response to an invading pathogen such as multidrug-resistant bacteria. Despite recent advancements, sepsis is a leading cause of morbidity and mortality, resulting in a significant global impact and burden. This condition affects all age groups, with clinical outcomes depending mainly on timely diagnosis and appropriate early therapeutic intervention. Because of the unique features of nanosized systems, there is a growing interest in developing and designing novel solutions. Nanoscale-engineered materials allow a targeted and controlled release of bioactive agents, resulting in improved efficacy with minimal side effects. Additionally, nanoparticle-based sensors provide a quicker and more reliable alternative to conventional diagnostic methods for identifying infection and organ dysfunction. Despite recent advancements, fundamental nanotechnology principles are often presented in technical formats that presuppose advanced chemistry, physics, and engineering knowledge. Consequently, clinicians may not grasp the underlying science, hindering interdisciplinary collaborations and successful translation from bench to bedside. In this review, we abridge some of the most recent and most promising nanotechnology-based solutions for sepsis diagnosis and management using an intelligible format to stimulate a seamless collaboration between engineers, scientists, and clinicians.

Malaria remains an important and challenging infectious disease, and novel antimalarials are required. Benzyl isothiocyanate (BITC), the main breakdown product of benzyl glucosinolate, is present in all parts of Tropaeolum majus L. (T. majus) and has antibacterial and antiparasitic activities. To our knowledge, there is no information on the effects of BITC against malaria. The present study evaluates the antimalarial activity of BITC and T. majus seeds, leaves, and stems aqueous extracts. We used flow cytometry to calculate the growth inhibition (GI) percentage of the extracts and BITC against unsynchronized cultures of chloroquine-susceptible Plasmodium falciparum (P. falciparum) 3D7-GFP strain. Extracts and/or compounds with at least 70% GI were validated by IC50 estimation against P. falciparum 3D7-GFP and Dd2 (chloroquine-resistant strain) unsynchronized cultures by flow cytometry, and the resistance index (RI) was determined. T. majus aqueous extracts showed some antimalarial activity higher in seeds than in leaves or stems. BITC’s GI was comparable to chloroquine’s. BITC’s IC50 was similar in both strains, thus a cross-resistance absence with aminoquinolines was found (RI < 1). BITC presented features that could open new avenues for malaria drug discovery.

(1) Background: The purpose of this study was to investigate the relationship between IMO and burnout while assessing the contribution of job demands and resources on increasing internal orientation and worker well-being and, consequently, the levels of perceived performance; (2) Methods: Data were collected between April and December 2021 by completing an online questionnaire, developed in the Google Forms platform. The following descriptive statistics were analyzed: measures of central tendency (mean), dispersion (standard deviation), minimum value and maximum value. Next, Pearson's correlation coefficient was calculated to analyze the relationship between the variables under study.; (3) Results: The results showed the mediating effect of IMO between performance feedback and perceived performance, while burnout mediates the relationship between emotional and technology demands and perceived performance. (4) Conclusions: These conclusions demonstrate that constructive feedback might help a more efficient performance through better internal communication and the positive effects of technology demands could be the result of the interaction between personal and organizational resources.

A major challenge of augmented and mixed reality applications is identifying the context and semantics of the real environment. Studies on object and action recognition were developed based on the improvement of machine learning techniques, allowing them to be annotated and recognized. This study aims to characterize current knowledge on the use of machine learning for recognizing objects and actions in augmented and mixed reality environments, increasing context awareness. Therefore, a systematic literature review of works related to these topics was made, using the Scopus and Web of Science knowledge bases. We searched articles and conference reviews or papers published between 2018 and 2022 and selected fifteen studies to be reviewed. The results indicate that there is a great demand for using machine learning to immersive technologies in factories, engineering, entertainment, education, health, among other application domains. However, these real-time interactive systems still have challenges and limitations to be solved, involving network communication, prediction time and the creation of a model that recognize objects and actions in broad contexts. Furthermore, additional research is needed to investigate how object and action recognition can increase context awareness in augmented reality applications.

Purpose: The goal of this article was to introduce a new technique for root coverage (RC), the Mixed-Thickness Tunnel access (MiTT), approaching a full-split design, showing the results obtained in a case series and demonstrating it step-by-step. Methods: Healthy individuals, non-smokers, and non-diabetics, who were diagnosed with gingival recession (GR) type 1 or 2 (RT1 or RT2). After all necessary evaluations, prophylaxis was performed 14 days before the surgical procedure. Then, after the basics clinical conduct and anesthesia, one or two vertical incision(s) on the mucosa (around 1-2 mm apical to the MGJ), lateral to the papilla base, were done. Initial detachment of the mucosa from the muscles (split design); it was permitted (but not mandatory) to do intrasulcular incisions; from the MGJ to coronal, subperiosteal access was done to raise the full-thickness tunnel. It must communicate up to the gingival sulcus area and the papilla’s base, keeping the papilla’s tip intact. A connective tissue graft was harvested, which was inserted through the linear incision or intrasulcularly. Interrupted sutures were done and may be used as adjunctive material. Results: Nine healthy individuals (7 females and 2 males) aged 19 and 43 years were enrolled. They were treated following the MiTT steps. There were four cases with a single GR, 2 patients with 2 teeth involved, and three with 3 or 4 GR. Seven cases were RT1 and two RT2. All RT1 cases achieved 100% RC, while the mean RC obtained for RT2 was around 80%. Conclusion: MiTT can be considered a more straightforward approach for minimally invasive surgical technique, which is a feasible option to treat RC with a high success rate, predictability, and esthetic preservation. There is a technical sensitivity to performing the full-split design procedure.

The complete regression of clear cell renal cell carcinoma (ccRCC) obtained pre-clinically with anti-carbonic anhydrase IX (CAIX) G36 chimeric antigen receptor (CAR) T cells in doses equivalent to 10e8 CAR T cells/ Kg renewed the potential of this target to treat ccRCC and other tumors in hypoxia. The immune checkpoint blockade (ICB) brought durable clinical responses in advanced ccRCC and other tumors. Here we tested CD8/4-1BB compared to CD28-based anti-CAIX CAR PBMCs cells-releasing anti-programmed cell death ligand-1 (PD-L1) IgG4 for human ccRCC treatment in vitro and in an orthotopic NSG mice model in vivo. Using a 10e7 CAR PBMCs cells/ Kg dose, anti-CAIX CD28 CAR T cells releasing anti-PD-L1 IgG highly decrease both tumor volume and weight in vivo, avoiding the occurrence of metastasis. This antitumoral superiority of CD28-based CAR PBMCs cells compared to 4-1BB occurred under ICB via PD-L1. Furthermore, T cell exhaustion status in peripheral CD4 T cells, additionally to CD8 was critical for CAR T cells efficiency. The lack of hepatotoxicity and nephrotoxicity upon administration of 10e7 CAR PMBCs cells/Kg dose is the basis for carrying out clinical trials using anti-CAIX CD28 CAR PBMCs cells releasing anti-PD-L1 antibodies or anti-CAIX 4-1BB CAR T cells, offering exciting new prospects for the treatment of refractory ccRCC and hypoxic tumors.

This study assesses coastal flooding extension mapping based on two innovative approaches. The first is based on the coupling of two robust numerical models (SWASH and LISFLOOD), in this case, discharges were extracted from the wave overtopping results from SWASH 1D and set as boundary conditions for LISFLOOD on the crest of an existing seawall where overtopping typically occurs. The second, hereby called the ‘Tilted Bathtub Approach’ (TBTA), is based on wave run-up levels and buffering the affected area of a prior flooding event, adjusting it for expected sea-states according to different return periods. The proposed approaches are applied to a case study on the Northern Portuguese coast, at Furadouro beach, in the municipality of Ovar, which has been facing multiple flooding episodes throughout recent years, including a dramatic storm in February 2014. This event was used as validation for the proposed methods. A 30 years long hourly local wave climate time series was used both to perform an extreme value analysis in order to obtain expected sea-states according to different return periods, and also for performing a sensitivity test for established empirical formulas to estimate wave run-up at this particular case. Results indicate both approaches are valuable: they yield coherent flood extension predictions that align well with the real inundated area from the 2014 storm. The convergence of these findings underscores the potential for these methods in future coastal flood risk assessment and planning.

Atopic dermatitis (AD) is a chronic skin disease marked by inflammation, erythema, dryness and pruritic lesions. Due to the intermittent nature of the disease, management strategies for AD focus on flare prevention following remission. A 24-year-old patient with mild-to-moderate AD lesions, previously non-responsive to topical corticosteroids (TCS), was treated with pimecrolimus for 12 days and emollient plus cream (EC) every day. After the initial 12-day treatment course, the patient was advised to use pimecrolimus if his symptoms reoccured. AD symptoms improved substantially between Weeks 0 and 12 with daily use of EC. However, by Week 12, his symptoms had relapsed, necessitating retreatment with pimecrolimus. Overall, the patient experienced flare-free periods between Weeks 3 and 12 and between Weeks 13 and 16. No tolerability issues were reported. This case report demonstrates the use of a complementary approach of daily administration of maintenance EC and intermittent application of pimecrolimus for flare management, which was effective for treating a patient with mild-to-moderate AD resistant to TCS.

Aims: This systematic review aims to evaluate the influence of Environmental Enrichment (EE) on oncological factors in experimental studies involving various types of cancer models. Methods: A comprehensive search was conducted in three databases: PubMed (161 articles), Embase (335 articles), and Scopus (274 articles). Eligibility criteria were applied based on the PICOS strategy to minimize bias. Two independent researchers performed the searches, with a third participant resolving any discrepancies. The selected articles were analyzed, and data regarding sample characteristics and EE protocols were extracted. The outcomes focused solely on cancer and tumor-related parameters, including cancer type, description of the cancer model, angiogenesis, tumor occurrence, volume, weight, mice with tumors, and tumor inhibition rate. Key-findings: A total of 770 articles were identified across the three databases, with 12 studies meeting the inclusion criteria for this systematic review. The findings demonstrated that different EE protocols were effective in significantly reducing various aspects of tumor growth and development, such as angiogenesis, volume, weight, and the number of mice with tumors. Furthermore, EE enhanced the rate of tumor inhibition in mouse cancer models. Findings: This systematic review highlights the significant impact of EE protocols on multiple parameters associated with tumor growth and development, including angiogenesis, occurrence, volume, weight, and tumor incidence. Moreover, EE demonstrated the potential to increase the rate of tumor inhibition. These findings underscore the importance of EE as a valuable tool in the management of cancer.

Avipoxvirus (APV), a linear dsDNA virus belonging to the subfamily Chordopoxvirinae of the family Poxviridae, infects more than 278 species of domestic and wild birds. It is responsible for causing the avian pox disease, which is characterized by its cutaneous and diphtheric forms. With a high transmission capacity, it can cause high economic losses and damage to the ecosys-tem. Several diagnostic methods are available and vaccination of birds can be an effective pre-ventive measure. To update the molecular characterization and phylogenetic analysis of viruses isolated in Portugal between 2017 and 2023, ten APV-positive samples were analyzed. A P4b gene fragment was amplified by PCR and the nucleotide sequence of the amplicons was deter-mined by Sanger sequencing. The sequences obtained were aligned using ClustalW, and a max-imum likelihood phylogenetic tree was constructed. With this study, it was possible to verify that the analyzed sequences are distributed in subclades A1, A2, B1, and B3. Since some of them are quite similar to others from different countries and obtained in different years, it is possible to conclude that there have been several viral introductions in Portugal. Finally, it was possible to successfully update the data on avipoxviruses in Portugal.

The present study aimed to characterize the microstructure of a temporary 3D printing resin (Resilab Temp), evaluating the optical properties and mechanical behavior according to different post-processing curing times. For the analysis of the surface microstructure and establishment of the best printing pattern, samples in bar format following ISO 4049 (25 x 10 x 3 mm) were designed in CAD software (Rhinoceros 6.0), printed on the W3D printer (Wilcos), and light-cured in Anycubic Photon at different times (without curing, 16 minutes, 32 minutes, and 1 hour). For the structural characterization, analyses were carried out in FTIR (Fourier Transform Infrared Spectroscopy) and Scanning Electron Microscopy (SEM). The mechanical behavior of the resin was based on flexural strength tests and Knoop microhardness. Color and translucency analysis were performed with a spectrophotometer (VITA Easy Shade Advanced 4.0), which was evaluated following CIELab, using gray, black, and white backgrounds. All analyses were performed immediately after making the samples and repeated after thermal aging with 2 thousand cycles (5-55 °C). The results obtained were statistically analyzed with a significance level of 5%. FT-IR analysis showed about a 46% degree of conversion on the surface and 37% in the center of the resin sample. The flexural strength was higher for the groups polymerized for 32 min and 1h, while the Knoop microhardness did not show a statistical difference between the groups. Color and translucency analysis also did not show statistical differences between groups. According to all the analyses carried out in this study, for the evaluated material, the post-polymerization time of 1 hour can be suggested to improve the mechanical performance of 3D-printed devices.

Background: Hospital accreditation has become ubiquitous in developing countries. Although studies recognize that accreditation can improve healthcare quality, efficiency, and safety, there are doubts about how hospitals deal with conflicts caused by the different institutional logics that inhabit this process. Therefore, this study aimed to investigate how professional and market logics, as well as the conflict between institutional demands, affect compliance with hospital accreditation. Methods: To this end, we developed a multiple case study in four Brazilian hospitals through in-depth interviews with sixteen participants (managers, physicians, nurses, physiotherapist) and on-site observation by the triangulation between the analysis of the narratives and the results of the multiple correspondence analysis. The interpretation and subsequent categorization of the interviews were guided by the study's analytical categories: institutional logics (professional and market); adoption objectives (legitimacy and efficiency); strategic responses to adoption (conformity, non-conformity, and customization); nature of demands (origin in the means and in goal). Results. The data showed that when professional logic is prominent, there is a greater tendency to customize activities, as there are conflicts in the means by which activities can be developed. When market logic stands out, there is a risk of non-conformity, mainly because the focus falls exclusively on goals. Finally, the data point to the absence of conflicts between justifications related to efficiency and legitimacy. Conclusion. We conclude the study by highlighting the theoretical and practical implications of recognizing the conflict between logics, contributing to a deeper understanding of how logic influences the attention given to specific demands and, more significantly, how they affect compliance with hospital accreditation standards, expanding the body of knowledge in the area.

Carbonate reservoirs, influenced by depositional and diagenetic processes and characterized by features like faults and vugs that impact storage capacity, require more than traditional Borehole Imaging logs (BHI) for accurate porosity data. This data is essential for geological assessments, production forecasting, and reservoir simulations. This work aims to address this limitation by developing methods to measure and monitor the sustainability of carbonate reservoirs and exploring the application of sustainability principles to their management. The study integrates BHI and conventional logs from two wells to classify porosity-based facies within the Barra Velha Formation (BVF) in the Santos Basin. The methodology involves four steps: (i) analyzing conventional logs; (ii) segmenting BHI logs; (iii) integrating conventional and segmented BHI logs using Self-Organizing Maps (SOM); and (iv) interpreting the resulting classes. Matrix porosity values and non-matrix pore sizes categorize the porosity into four facies (A to D). Facies A has high non-matrix porosity with 14,560 small megapores, 5,419 large megapores, and 271 gigapores (71.9%, 26.76%, and 1.34% of the 20,250 pores, respectively). Facies B shows moderate non-matrix porosity with 8,669 small megapores, 2,642 large megapores, and 33 gigapores (76.42%, 23.29%, and 0.29% of the 11,344 pores, respectively) and medium matrix porosity. Facies C exhibits low non-matrix porosity with 7,749 small megapores, 2,132 large megapores, and 20 gigapores (78.27%, 21.53%, and 0.20% of the 9,901 pores, respectively) and medium matrix porosity. Facies D has low non-matrix porosity with 9,355 small megapores, 2,346 large megapores, and 19 gigapores (79.82%, 20.02%, and 0.16% of the 11,720 pores, respectively) and low matrix porosity. The novelty of this work lies in integrating data from two sources to classify porosity across the Pre-Salt reservoir interval, serving as a proxy for preliminary litho-facies identification without core data. This study advances our understanding of carbonate reservoir sustainability and heterogeneity, offering valuable insights for robust, sustainable reservoir characterization and management in the context of global environmental and geological changes.

The research reported on this paper was aimed at improving the overall efficiency of a PDO certified artisanal cheese production process. Being a PDO certified foodstuff by the EU, it is considered to have properties and qualities determined by the geographical environment in which is made, with its production taking place in a specific and determined geographical location, in this case the Serra da Estrela region. In that sense, the authors conducted a mapping according to a systemic perspective of the processes involved in the context of manufacturing and distribution of certified Serra da Estrela cheese. Numerous methods were used throughout the process, such as a systemic design analysis, and techniques derived from ethnographic methods, which led to the collection of data in the field and consequently provided the immersion of the researcher in genuine work situations. Critical points were identified and emphasized in the systemic map with the purpose of encouraging initiatives to address and overcome the gaps and inefficiencies detected. The systemic design analysis triggered the development of design work. Observations following an ethnographic approach identified ergonomic risks in cheese making during the process of cutting excess chips, fostering the emergence of musculoskeletal disorders at the wrist. A tool that fits best to the task at hand was developed. A prototype of the new tool enabled collecting feedback from use in the work context, in order to inform product development. The domains of agricultural production and microbiology, considering the specific microorganisms developed trough the ripening process of the cheese, turned out to be aspects of high importance for the issue under focus, contributing to a broader understanding of the ripening process and its risks, simultaneously improving the efficiency and success of cheese production. If it were not for the systemic analysis, which served as a link between the boundaries of distinct domains such as the risk of microorganism contamination, ergonomics, energy efficiency, legislation and regulation policies, transportation challenges and economic viability, approached throughout the research. Simultaneously creating bridges between them, the various problems might not have been detected in the first place, as they are usually addressed in specialized disciplines, predetermined by the restrictions of each specific area of knowledge. As a consequence of the development of this research, which was based on an analysis that sought to establish possible connections between various disciplines and tried to constantly maintain a holistic perspective, making new connections and observing the issues from a new angle, apart from the already established methodologies. All this allowed to lay out the seeds for the development of a plan to tackle the critical points identified by the systemic analysis reported in this paper.

Baía de Todos os Santos is the second largest bay in Brazil and is home to important ecosystems, including estuarine systems and mangroves. However, studies on the seasonal variability of its soil properties and composition are still scarce. For this study, soil and leaf samples were seasonally collected from mangrove forests at four sites (Cacha Prego, Ponta Grossa, Ilha de Maré, and Pitinga), which are representative of different environmental conditions within the BTS. Soil physicochemical properties, soil composition and partition of Fe forms were determined, and analysis of minerals by Scanning Electron Microscope, was performed on soil samples. Isotopic ratios (δ13C, δ15N) were also determined on soil and leaf samples. Soils showed significant spatial and temporal changes affecting both their properties (pH, Eh) and their composition (TOC, pyrite and Fe oxyhydroxide contents). Clear spatial changes were observed in redox potential, significantly affecting the concentrations of the different geochemical forms of Fe, particularly the concentrations of crystalline oxyhydroxydes and pyrite in one of the studied sites. In three of the study sites, pyrite crystals showed clear evidence of degradation associated with sandy soils. Finally, δ13C and N/C ratios in soils seem to suggest a mixed origin of organic matter.

This study analyzes the relationship between the spread of the SARS-CoV-2 virus (COVID-19) and the mobility patterns of the Portuguese population. By reducing mobility, the idea is that contacts are reduced, countering the spread of the virus in the community. As an indicator of the spread of the virus, the reproduction number (Rt) was used. Data from Google's Community Mobility Reports was used to evaluate changes in mobility patterns. This report uses location data from Android mobile phone users. The locations are divided into retail and recreation, grocery and pharmacy, parks, transit stations, workplaces and residential. In this year of the COVID-19 crisis in Portugal, population mobility patterns have changed over the various phases of the pandemic. At first, all mobility was affected uniformly, with the population avoiding much of the activity outside the home. In a second phase, there was some adaptation, and the areas considered to be of lower risk had less impact, emphasizing the changes in the relationship between daily life and the workplace.

With the current technological transformation in the automotive industry, autonomous vehicles are getting closer to the Society of Automative Engineers (SAE) automation level 5. This level corresponds to the full vehicle automation, where the driving system autonomously monitors and navigates the environment. With SAE-level 5, the concept of a Shared Autonomous Vehicle (SAV) will soon become a reality and mainstream. The main purpose of an SAV is to allow unrelated passengers to share an autonomous vehicle without a driver/moderator inside the shared space. However, to ensure their safety and well-being until they reach their final destination, it is required an active monitoring of all passengers. In this context, this article presents a microphone-based sensor system that is able to localize sound events inside an SAV. The solution is composed of a Micro-Electro-Mechanical System (MEMS) microphone array with a circular geometry connected to an embedded processing platform that resorts to Field-Programmable Gate Array (FPGA) technology to successfully process in hardware the sound localization algorithms.

Music-domain visual programming languages (VPLs) have shown to be Turing complete. However, the common lack of built-in flow control structures can obstruct using VPLs implementing general-purpose algorithms, which harms the direct use of algorithms and algorithm theory in art creation processes using VPLs. In this article, we show how to systematically implement general-purpose algorithms in music-domain visual languages by using the Finite State Machines with Datapath computation model. The results expose a finite state machine and a set of internal state variables that walk paths whose speed can be controlled using a metronome ticks and whose path depends on the initial conditions of the algorithm. These elements can be further mapped to music elements according to the musician's intentions. We demonstrate this technique by implementing Euclid's Greatest Common Divider algorithm and using it to control high-level music elements in an implementation of Terry Riley's In C, and to control audio synthesis parameters in a FM synthesizer.

The Amazon region has the most incredible diversity of freshwater stingrays; however, there are still places where information about this group is scarce. The present work aims to record the occurrence of freshwater stingrays in the Uatumã river basin, Amazonas, Brazil. For this, collections were carried out in three municipalities bathed by the Uatumã River, Presidente Figueiredo, Itapiranga and São Sebastião do Uatumã. The rays were collected through fishing using a hand net and, after capture, were identified through the pattern of the dorsal and ventral color of the disc, the absence or presence of the labial groove and the organization of the row of spines on the tail, too were also measured, weighed and sexed. In total, 69 specimens of Potamotrygonines were captured, 59 of which were from the genus Potamotrygon and ten individuals from the genus Paratrygon. The present study provides preliminary information on the characteristics of freshwater stingray species that may occur in the Uatumã River. Furthermore, new research is necessary to improve the identification of specimens to determine the diversity and elucidate aspects related to the biology of elasmobranchs in the Uatumã River Basin, Brazil.

This comprehensive review is devoted to an under-exploited family of phenolic compounds, the coumarins, and the most relevant strands in which they are involved in some spirit beverages – wine spirit, brandy, whiskey, sugar cane spirits (rum and cachaça) and grape marc spirit – with great importance worldwide in terms of production, trade and consumption. It gathers the key discoveries on the topic considering the production process of each spirit beverage, the related sources of coumarins (different kinds of wood used in the ageing stage) along with the factors that govern them and can influence the sensory properties of the aged beverages. An overview of the analytical methods available for their identification/quantification is also included, as well as the corresponding trends for the advancement of knowledge in this field. Moreover, the remarkable role of coumarins as nutraceuticals, their importance as chemical markers for authenticity purposes, and their relationship with food safety of these spirit beverages are also addressed, highlighting the current gaps and issues, and providing clues for future research.

Geoethics is a field of knowledge currently in full development. Researchers in geoethics are pri-marily concerned with the anthropogenic interaction with the Earth system. Due to its nature, ge-oethics holds particular importance in sustainable development due to its nature as it aims to promote ethical human behaviour that does not negatively impact the Earth system. In the present research, we implemented an intervention program addressing various issues related to the sus-tainability of the Earth system, such as the exploitation of geological resources, the management of geological risks, and the conservation and promotion of geopatrimony. The intervention program was applied to higher education students in the geosciences field. A sample of 90 students from various geosciences courses completed an initial questionnaire, revealing limited knowledge about geoethics. This study resorted to mixed-method research involving interviews with some students who volunteered (n=52). The results showed that after applying the intervention programme most students had developed a deeper understanding of the topics addressed and recognised the con-tributions this scientific area can make to sustainable development. Additional research in geoethics education is essential to foster the integration of geoethics into the curricula of higher education institutions.

Achieving universal access to water and sanitation services in developing countries requires a coherent legal, political, and institutional environment, along with a clear financial strategy. Regionalizing utilities may be crucial for addressing disparities, economic inequalities, and governance challenges. Regionalization offers economies of scale, resource efficiency, knowledge sharing, and collaboration. The cornerstone will be ensuring the financial-economic viability of regional utilities, considering their social impacts in terms of affordability. The State of Santa Catarina case study is assessed. In the case of Santa Catarina, only four regional utilities currently generate sufficient revenue, without factoring in necessary investments, indicating the need to review design parameters to improve operational efficiency and increase revenues. Additional financial support may be required to ensure universal access. Tariff adjustments must strike a balance between cost-effectiveness and affordability for families.

New proposals for the equation of state of four- and five-dimensional hard-hypersphere mixtures in terms of the equation of state of the corresponding monocomponent hard-hypersphere fluid are introduced. Such proposals (which are constructed in such a way so as to yield the exact third virial coefficient) extend, on the one hand, recent similar formulations for hard-disk and (three-dimensional) hard-sphere mixtures and, on the other hand, two of our previous proposals also linking the mixture equation of state and the one of the monocomponent fluid but unable to reproduce the exact third virial coefficient. The old and new proposals are tested by comparison with published molecular dynamics and Monte Carlo simulation results and their relative merit is evaluated.

: A comprehensive analysis was performed, considering blockchain technology (BT) proprieties in digital health, addressing medico-legal, privacy, and regulatory considerations. Adherence to personal data protection and healthcare regulatory guidelines were analyzed and compared for GDPR (Europe), HIPAA (United States), CCPA (California), PIPEDA (Canada), Privacy Act of 1988 (Australia), APPI (Japan), and LGPD (Brazil). Issues such as Health Systems, Strengthening and aligning policy orientations and initiatives, and emphasizing the role of data analysis in shaping health policies were explored. The study addressed conflicts between the legal frameworks and blockchain, comparing and suggesting solutions like revision of laws and integration of com-pliance mechanisms. Additionally, it sought to enhance IT-health literacy by integrating healthcare and legal domains. Ongoing collaboration between legal, health, and IT experts is essential for designing systems that effectively balance privacy rights and data protection while maximizing the benefits of disruptive technologies like blockchain.

Precision medicine approaches often relies on complex and integrative analysis of multiple biomarkers from “omics” data to generate insights that can help either diagnostics, prognostics or therapeutical decisions. Such insights are often made using Machine learning (ML) models that make sample classification for a particular phenotype (yes/no). Building such models is a challenge and time-consuming, requiring advanced coding skills and mathematical modelling expertise. Artificial intelligence (AI) is a methodological solution that has the potential to facilitate, optimize and scale model development. In this work, we developed an AI-based, user-friendly and code-free platform (https://digitalphenomics.com) that fully automates the development of predictive models from quantitative “omics” data. Here, we show the application of this tool with the development of cancer survival prognostics models using real-life data from breast, lung and renal cancer transcriptomes. We report and compare their sensitivity, specificity, accuracy and Receiver Operating Characteristic (ROC) curve Area Under the Curve (AUC). Further, we report the associated sets of genes (biomarkers) and their expression pattern that are predictive of cancer survival. Moreover, we made our models available as online tools to generate prognostic predictions based on the gene expression of the biomarkers. In conclusion, we demonstrated that our tool is a robust user-friendly solution to develop bespoke predictive tools from “omics” data which facilitate precision medicine introduction to the point-of-care.

Background: To inform global health policies and resources planning, this paper analyzes evolving trends in physical rehabilitation needs, using data on Years Lived with Disability (YLDs) from the Global Burden of Disease Study (GBD) 2017. Methods: Secondary analysis of how YLDs from conditions amenable to physical rehabilitation have evolved from 1990 to 2017, for the world and across countries of varying income levels. Linear regression analyses were used. Results: A 66.2% growth was found in estimated YLD Counts amenable to physical rehabilitation: a significant and linear growth of more than 5.1 billion YLDs per year (99%CI: 4.8–5.4; r² = 0.99). Low-income countries more than doubled (111.5% growth) their YLD Counts amenable to physical rehabilitation since 1990. YLD Rates per 100,000 people and the percentage of YLDs amenable to physical rehabilitation also grew significantly over time, across locations (all p > 0.05). Finally, only in high-income countries Age-standardized YLD Rates significantly decreased (p < 0.01; r² = 0.86). Conclusions: Physical rehabilitation needs have been growing significantly in absolute, per-capita and in percentage of total YLDs, globally and across countries of varying income level. In absolute terms, growths were higher in lower income countries, wherein rehabilitation is under-resourced.

Evaluating mutation testing behavior can help decide whether refactoring successfully maintains the expected initial test results. Moreover, manually performing this analytical work is both time-consuming and prone to errors. This paper extends an approach to assess test code behavior and proposes a tool called MeteoR. This tool comprises an IDE plugin to detect issues that may arise during test code refactoring, reducing the effort required to perform evaluations. A preliminary assessment was conducted to validate the tool and ensure the proposed test code refactoring approach is adequate. By analyzing not only the mutation score but also the generated mutants in the pre- and post-refactoring process, results show that the approach is capable of checking whether the behavior of the mutants remains unchanged throughout the refactoring process. This proposal represents one more step toward the practice of test code refactoring. It can improve overall software quality, allowing developers and testers to safely refactor the test code in a scalable and automated way.

This work exclusively focuses on the assessment of the thermal performance of a multifunctional facade panel incorporating PCM in foam layers, recurring to a hot box heat flux meter method to determine the thermal transmittance (U-value). The experimental setup is based on the steady-state approach using climatic chambers, assuring a stable thermal environment. Even small fractions of PCM achieved a small reduction in thermal amplitude. Numerical simulations using Ansys Fluent were developed to evaluate the performance of PCM use over a wide range of temperature boundary conditions and operating modes. These numerical models were calibrated and validated using the results of experimental tests, achieving a correlation factor of 0.9674, thus accurately representing a real-world scenario. The decrement factor (f) was used to analyse the data. It was identified that the efficiency of the panel and size of the optimum region increased with the PCM fraction growth. The simulated behaviour was optimum when the input mean temperature is of 20 °C for a room temperature of between 18-20 °C. The results show the significant potential of the multi-layered panel and the thermal regulator effect of the PCM incorporated on indoor space temperature to reach good thermal comfort levels.

In the recent years, tubular nanostructures have been related with immense advances in various fields of science and technology. Considerable research efforts have been centered on the theoretical prediction and manufacturing of non-carbon nanotubes (NTs), which meet modern requirements for the developing of novel devices and systems. In this context, diatomic inorganic nanotubes formed by atoms of elements from the 13th group of the periodic table (B, Al, Ga, In, Tl) and nitrogen (N), have received much research attention. In the present work, the elastic properties of single-walled boron nitride, aluminium nitride, gallium nitride, indium nitride and thallium nitride nanotubes were numerically evaluated using the nanoscale continuum modelling approach (also called molecular structural mechanics). The elastic properties (rigidities, surface Young´s and shear moduli, and Poisson´s ratio) of nitride nanotubes are discussed with respect to the bond length of the corresponding diatomic hexagonal lattice. The results obtained contribute to a better understanding of the mechanical response of nitride compound-based nanotubes, covering a broad range from the well-studied boron nitride NTs to the hypothetical thallium nitride NTs.

There are complex ethical dilemmas inherent in medicine teaching, particularly in clinical prac-tice involving actual patients. Questions must be raised on fulfilling medical students' training needs while still respecting patients' fundamental rights to autonomy and privacy. We aimed to assess patients' perspectives regarding medical students' involvement in their medical care. An observational, cross-sectional study was developed, and an interview-like questionnaire was ap-plied randomly to patients waiting for a consult/admitted to three distinct departments: General Surgery, Obstetrics/Gynaecology, and Infectious Diseases. Of the 77% interviewed patients who reported previous experiences with medical students, only 59% stated that they were asked for consent for their participation and 28% that students had adequately introduced themselves. Pa-tients from Gynaecology/Obstetrics were the ones who reported lower rates of these practices and were also the ones who were most bothered by students' presence, stating that they would refuse students' participation in the future. Male patients received more explanations than female pa-tients regarding the same matters. 35% of patients stated they would feel more comfortable without the medical students' presence. The study shows a need to pay closer attention to ful-filling patients' fundamental rights.

Phytoene desaturase (PDS) is a plant enzyme involved in carotenoid biosynthesis. The PDS gene has been used as a selective marker for genome editing in several plant species, including banana (Musa spp.). Its knockout promotes dwarfism and albinism, characteristics that are easily recognizable and highly favorable. In Musa spp., the A genome increases fruit production and quality, whereas the B genome is associated with tolerance to biotic and abiotic stresses. The objective of this study was to identify a molecular marker in the PDS gene to easily discriminate the A and B genomes of banana. A 2166 bp fragment for the ‘PDSMa’ marker was identified as polymorphic for the A genome (identification accuracy of 99.33%), whereas ~332 and ~225 bp fragments were detected for the ‘PDSMb’ primer with 100% accuracy using MedCalc software. To the best of our knowledge, this is the first study to use the PDS gene to determine doses of the A genome and identify the B genome in Musa spp., which will aid in evaluating the genomic constitution of banana hybrids and accessions at the seedling stage, and accelerating their classification in crop genetic improvement programs.

According to previous studies the median raphe region (MRR) is known to contribute significantly to social behavior. Beside serotonin, there are reports of a small population of dopaminergic neu-rons in this region. Dopamine is linked to reward and locomotion, but very little has been known about its role in the MRR. To address that, we first confirmed the presence of dopaminergic cells in the MRR of mice (immunohistochemistry, RT-PCR) and humans (RT-PCR). Next, we used chemogenetic technology in mice containing Cre enzyme under the promoter of the dopamine transporter (DAT). With the help of an adeno-associated virus, artificial receptors were expressed in the dopaminergic cells of the MRR (DAT-MRR). Four weeks later, extensive behavioral charac-terization started 30 minutes after the injection of the artificial ligand (Clozapine-N-Oxide). Stimu-lation of DAT-MRR decreased social interest without influencing aggression and with an increase in social discrimination. Additionally, inhibition of the same cells increased the friendly social be-havior during social interaction test. No behavioral changes were detected in anxiety, memory and locomotion. All in all, dopaminergic cells were present both in the mice and human MRR, and manipulation of dopaminergic neurons of the MRR elicited a specific social response.

Neurodevelopmental and late-onset neurodegenerative disorders present as separate entities that are clinically and neuropathologically quite distinct. However, recent evidence has highlighted surprising commonalities and converging features at the clinical, genomic, and molecular level between these two disease spectra. This is particularly striking in the context of autism spectrum disorder (ASD) and Parkinson’s disease (PD). Genetic causes and risk factors play a central role in disease pathophysiology and enable the identification of overlapping mechanisms and pathways. Here, we focus on clinico-genetic studies of causal variants and overlapping clinical and cellular features of ASD and PD. Several genes and genomic regions were selected for our review, including SNCA (alpha-synuclein), PARK2 (parkin RBR E3 ubiquitin protein ligase), chromosome 22q11 deletion/DiGeorge region, and FMR1 (fragile X mental retardation 1) repeat expansion, which influence development of both ASD and PD with converging features related to synaptic function and neurogenesis. Both PD and ASD display alterations and impairments at the synaptic level, representing early and key disease phenotypes which support the hypothesis of converging mechanisms between the two types of diseases. Therefore, understanding the underlying molecular mechanisms might inform on common targets and therapeutic approaches. We propose to re-conceptualize how we understand these disorders and provide a new angle into disease targets and mechanisms linking neurodevelopmental disorders and neurodegeneration.

Abstract: Comparing outcrop data to laboratory results is important to verify and validate experiments of analogue and reservoir materials especially regarding conditions for deformation experiments. This is important better understand highly complex carbonate reservoir strata and their response to changes in subsurface conditions, reducing subsurface uncertainty. This study develops methods to allow for a more straightforward comparison of outcrop data (m-scale) with experimentally created fracture arrays developed in cylindrical samples (cm-scale). The main objective is to assess usefulness of experimentally-produced fracture networks as analogues for subsurface structures, typically at the meter and above scale by developing new techniques to use the lab deformation. It analyses key characteristics of laboratory-induced fracture networks by adapting scanline methods to use with x-ray tomography (XRT) images to allow for comparison with outcrop and field data. To test and verify these new methods two low permeability carbonate samples were used for deformation testing and analysis. Applying the different scanline methods we show that they can be used to analyse lab induced fractures (mm to cm-scale) identified in XRT images for comparison with outcrop data (m-scale). In addition, these methods also allow for quantification of fracture network attributes e.g. fracture spacing, fracture apertures, orientation. This new data bridges the gap between micro-scanlines using thin sections and outcrop scanlines.

Despite the efforts made to stop the tuberculosis (TB) epidemic, it still remains one of the leading causes of death from an infectious disease. Previous work in the group uncovered a new family of amides which showed promising activities against Mycobacterium tuberculosis. A closer look at the literature showed that these compounds are structurally related to the DNB family of DprE1 inhibitors, so, we decided to study a wide range of substituted amides and determine their activity, focusing on unexplored structures related to the dinitrobenzamides (DNB) found in the literature. To synthesize our library of compounds we started from 3,5-dinitrobenzoic acid to form the nitroaromatic core that is characteristic of the DNB’s, to which we then added linear or cyclic amine moieties. Additionally, the impact of terminal aromatic moieties was also assessed for some derivatives, via an ether, ester, or amide bond. In order to obtain the desired derivatives, multiple synthetic approaches were used, mainly focused on nucleophilic addition/elimination reactions, SN2 reactions and Mitsunobu reactions. The activity was impacted mainly by two structural features, the addition of an aromatic moiety as a terminal group and the type of the linker. The most interesting compounds exhibited activities comparable to isoniazid and DNB1. Computational studies were also performed aimed at understanding their possible interactions with DprE1. The most active compounds are a good starting point for further development, and we plan to study an extended family of compounds based in those structures.

This work deals with the evaluation of adhesive single-lap joints using ultrasonic guided waves. An adhesive bonded lap joint can be modelled as a three-layer system made up of two adherents and an adhesive. The propagation of guided waves in the joint is developed from matrix formulations. The behavior of the different guided wave modes that propagate in the bonded region is characterized and it is found that their relative amplitudes can be estimated based on the properties of the incoming wave that propagates in the non-bonded region. It was verified that the excitation of these modes is ruled by the degree in which the shapes of both modes match each other. A 3D simulation of two aluminium bonded plates using 500 kHz ultrasonic transducers in a pitch and catch configuration was implemented using the Matlab k-Wave toolbox. Scattering effects due to some produced defects located in the bond line of the lap joints were simulated. Experimental setup with some artificial defects produced in the aluminum joints were used in order to compare with the simulated. Qualitative agreement was observed for the two approaches. The observed deviation can be due to the different characteristics of the experimental and simulated defects.

Count data analysis presents unique challenges due to its discrete nature, often exhibiting excessive zeros and overdispersion. To address these complexities, count models, such as Poisson regression and Negative Binomial regression, have been developed, enabling modeling and prediction of count-based phenomena. Additionally, it’s important to notice that zero inflation, a phenomenon commonly observed in count data, requires specialized techniques for robust analysis. This article provides an overview of count data and count models, explores zero inflation, introduces Likelihood Ratio Tests, and explains how the Vuong Test can be used as a model selection criteria. Furthermore, we created a Vuong Test implementation from scratch using the Python programming language. This implementation enhances the accessibility and applicability of the Vuong Test in real-world scenarios, providing a valuable contribution to the academic community, since Python didn’t have an implementation of this statistical test.

Recent years have shown that traditional regulatory techniques alone are not effective in achieving behavior change in important fields such as environmental sustainability. Governments all over the world have been progressively including behaviourally informed considerations in policy and law-making with the aim of improving the acceptance and impact of sustainability-oriented measures. This led to the arrival of alternative regulatory tools, such as nudges. The effectiveness of nudges for environmental sustainability (green nudges) has been largely reported but the practical and ethical implications are still largely neglected by academic research. In this contribution, “nudges” are conceptually distinguished from “boosts” and their ethical briefly explained. The analysis is made at the light of the current mostly European and US American academic literature.

Introduction: Within primary ARDS, SARS-CoV-2-associated ARDS (C-ARDS) emerged in late 2019, reaching its peak during the subsequent two years. Recent efforts in ARDS research have concentrated on phenotyping this heterogeneous syndrome to enhance comprehension of its pathophysiology. Methods and Results: A retrospective study was conducted on C-ARDS patients from April 2020 to February 2021, encompassing 110 participants with a mean age of 63.2±11.92 (26-83 years). Of these, 61.2% (68) were male, and 25% (17) experienced severe ARDS, resulting in a mortality rate of 47.3% (52). Ventilation settings, arterial blood gases, and chest X-ray (CXR) were evaluated on the first day of invasive mechanical ventilation and between days two and three. CXR images were scrutinized using a convolutional neural network (CNN). A binary logistic regression model for predicting C-ARDS mortality was developed based on the most influential variables: age, PaO2/FiO2 ratio (P/F) on days one and three, CNN-extracted CXR features, and age. Initial performance assessment on test data (23 patients out of the 110) revealed an area under the receiver operating characteristic (ROC) curve of 0.862 CI (0.654-0.969). Conclusion: Integrating data available in all intensive care units enables the prediction of C-ARDS mortality by utilizing evolving P/F ratios and CXR. This approach can assist in tailoring treatment plans and initiating early discussions to escalate care and extracorporeal life support. Machine learning algorithms for imaging classification can uncover otherwise inaccessible patterns, potentially evolving into another form of ARDS phenotyping. The combined features of these algorithms and clinical variables demonstrate superior performance compared to either element alone.

Desmoplastic small round cell tumor (DSRCT) is an extremely rare, aggressive sarcoma affecting adolescents and young adults with male predominance. Generally, it originates from serosal surface of abdominal cavity. The hallmark characteristic of DSRCT is the EWSR1-WT1 gene fusion. This translocation up-regulates the expression of PDGFRα, VEGF and other proteins related to tumor and vascular cell proliferation. Current management of DSRCT includes a combination of chemotherapy, radiation and aggressive cytoreductive surgery plus intra-peritoneal hyperthermic chemotherapy (HIPEC). Despite advances in multimodal therapy, outcomes remain poor since the majority of patients present disease recurrence and die within 3 years. The dismal survival makes DSRCT an orphan disease with urgent need of new drugs. The treatment of advanced and recurrent disease with tyrosine kinase inhibitors, such as pazopanib, sunitinib, and mTOR inhibitors have been evaluated in small studies. Recent works using comprehensive molecular profiling of DSRCT identified potential therapeutic targets. In this review, we aim to describe the current studies conducted to better understand DSRCT biology and to explore the new therapeutic strategies under investigation in preclinical models and in early phase clinical trials.

Passiflora cincinnata Mast is a plant popularly used in traditional medicine in northeastern Brazil. The present study aimed to evaluate the anti-lipoperoxidative and anti-α-amylase properties, and cytotoxicity of an extract and fraction of passion fruit leaves (P. cincinnata Mast), as well as the antihyperglecemiant activity of the fraction rich in glycosylated flavonoids and showing low cytotoxicity in rats with a postprandial hyperglycaemia condition. The ethyl acetate fraction (F.ACT) of the P. cincinnata leaves presented the best anti-lipoperoxide properties with TBARs 81.49%, 95.48% and 75.62% lower than AAPH, FeSO₄ and H₂O₂ induced controls, respectively, at 200 μg.mL-1. In addition, it presented an anti-α-amylase potential, with a better ability to inhibit the α-amylase enzyme in comparison to the acarbose control (IC₅₀ 6.49 ± 0.11 and 12.01 ± 0.4 μg.mL-1, respectively). The hydroalcoholic extract of P. cincinnata (ExEt) presented high content of total tannins, flavonoids and flavonols. However, F.ACT had the highest concentration of flavonoids among the fractions studied. HPLC analysis of this fraction revealed the presence of the flavonoids isovitexin, orientin and isoorientin. F.ACT showed low to no cytotoxicity below 150 μg.mL-1. Regarding the post-prandial antihyperglycaemic activity of F.ACT, it was observed at 50 and 100 mg.kg-1.

This article presents and discusses analytical data on the scientific publication record from 1910 to 2020 on two topics: "climate" and "climate change/global warming/climate emergency". The goal is to visualize how the publication record on these two topics has evolved over time, from different classification perspectives (year, country, source and organization). Three hypotheses are tested using data collected from Web of Science and various graphical representations of the data. It is found that research output related to the Earth’s contemporary changing climate overtook that of general climate research in 2011, and the publication ratio has been expanding in the last decade. There are significant differences in the publication countries and sources between the two topics, and conversely less significant differences in terms of organizations publishing these works. Differentiation factors that affect the level of research output and engagement on the climate challenge include: island versus landlocked nations, specialized versus general scientific journals, academic versus institutional organizations. The future of the publication records is discussed, such as the emergence of new terms to refer to the climate challenge, such as “climate emergency”.

The world is facing a great technological transformation towards full autonomous vehicles, where optimists predict that by 2030, autonomous vehicles will be sufficiently reliable, affordable and common to displace most human driving. To cope with these trends, reliable perception systems must enable vehicles to hear and see all the surroundings, being light detection and ranging (LiDAR) sensors a key instrument for recreating a 3D visualization of the world in real time. However, perception systems must rely in accurate measurements of the environment. Thus, sensors must be calibrated and benchmarked before being placed on the market or assembled in a car. This article presents an Evaluation and Testing Platform for Automotive LiDAR sensors with the main goal of testing not only commercially available sensors, but also sensor prototypes currently under development in Bosch Automotive Electronics division. The testing system can benchmark any LiDAR sensor under different conditions, recreating the expected driving environment to which such devices are normally subjected. To characterize and validate the sensor under test, the platform evaluates several parameters such as the field of view (FoV), angular resolution, sensor’s range, etc. This project results from a partnership between the University of Minho and Bosch Car Multimedia Portugal, S.A.

The Golgi apparatus (GA) dysfunctions in Parkinson’s Disease (PD), neurodevelopmental disorders (NDDs), cancer, and organelle structural biology (OSB) can provide insights into therapeutic targets, gene therapy, and drug design. Primary defects and fragmentation within the GA are implicated in a wide range of neurodegenerative diseases. GA defects typically result in mislocation of proteins, accumulation of undegraded proteins, and impaired glycosylation of proteins. Inhibition of vesicular trafficking by α-synuclein (aSyn) may affect the dopamine-producing neurons and neuromodulators. GA regulates apoptosis during pathological mechanisms of neurological diseases and could provide new avenues in treatments through translation research. PD patients bearing the hereditary E46K disease mutation manifest the clinical picture of parkinsonism. How do we provide high resolution nanoimages of the GA during disease to capture dysfunction? Could we visualize the aSyn traffic jam between vesicles in the organelles ER and GA? OSB is emerging as a field as more technology advances and is more accessible. Structural studies of the GA will advance the field of neurological disease forward with an in depth understanding of dysfunction, fragmentation, and defects. Discoveries of the GA in PD, NDDs, and cancer would break new ground and provide translational medicine data of these diseases. Future research could be visualizing high angle annular dark field-STEM (HAADF-STEM) tomograms, cryogenic electron tomography (cryo-ET), multiplex correlative light and electron microscopy (cryo-CLEM), nanobody-assisted tissue immunostaining for volumetric EM (NATIVE) and using soft X-ray tomography (SXT) and computational reconstruction of the GA.

Renewable Energy Communities (RECs) are emerging as an effective concept and model to empower the active participation of citizens on the energy transition, not only as energy consumers, but also as promoters of environmentally friendly energy generation solutions. This paper aims to contribute to the management and optimization of individual and community Distributed Energy Resources (DER). The solution follows a price and source-based REC management program, in which consumers day-ahead flexible loads (Flex Offers) are shifted according to electricity generation availability, prices and personal preferences, to balance the grid and incentivize user participation. The heuristic approach used in the proposed algorithms allows the optimization of energy resources in a distributed edge and fog approach with a low computational overhead. The simulations performed using real world energy consumption and flexibility data of a REC with 50 dwellings show an average cost reduction of 10.6% and an average increase of 11.4% in individual self-consumption. Additionally, the case-study demonstrates promising results regarding grid load balancing and the introduction of intra-community energy trading.

In this work, the effect of reaction time and biomass-to-H2O ratio on the structural evolution of hydro-char and kinetic of by hydrothermal processing of corn Stover with hot compressed H2O, have been systematically investigated. The experiments were carried out at 250 °C, heating rate of 2.0 °C/min, biomass-to-H2O ratio of 1:10, and reaction times of 60, 120, and 240 minutes, and at 250 °C, 240 minutes, heating rate of 2.0 °C/min, and biomass-to-H2O water ratio of 1:10, 1:15, and 1:20, using a pilot scale stirred tank reactor of 5 gallon. The characterization of solid phase products performed by thermo-gravimetric analysis, scanning electron microscope, energy dispersive X-ray spectroscopy, X-ray diffraction, and elemental analysis (C, N, H, S). The physical-chemistry properties of solid phase analyzed in terms of dry matter (DM), total organic content (TOC), and ash. The yields of solid and gas phases decrease linearly with decreasing biomass-to-H2O ratio, while that of liquid phases increases linearly. For constant biomass-to-H2O ratio, the yields of solid, liquid, and gaseous reaction products varied between 52.97 and 35.82% (wt.), 44.84 and 54.59% (wt.), and 2.19 and 9.58% (wt.), respectively. The yield of solids decreases exponentially by decreasing the reaction time, while the yields of liquid and gas phases increase exponentially. For constant biomass-to-H2O ratio, TG/DTG curves shows that reaction time of 60 minutes was not enough to carbonize corn Stover. For constant reaction time, TG/DTG curves shows that increasing the H2O-to-biomass ratio worse the carbonization of corn Stover. For constant biomass-to-H2O ratio, the SEM images show the main morphological structure of the corn Stover remains practically unchanged, while for constant reaction time, SEM images show that plant microstructure retains part of its original morphology, demonstrating that a decrease on biomass-to-H2O ratio worse the carbonization of corn Stover. For constant biomass-to-H2O ratio, the EDX analysis shows that the carbon content in hydro-char increases with reaction time, while for constant reaction time, the carbon content decreases with increasing biomass-to-H2O ratio. The kinetic of corn Stover degradation was correlated with a pseudo-first order exponential model, exhibiting a root-mean-square error (r2) of 1.000, demonstrating that degradation kinetics of corn Stover with hot compressed H2O, expressed as hydro-char formation, is well described by an exponential decay kinetics.

Background: Elevated fasting plasma glucose and visceral fat area (VFA) is highly prevalent in obese adults. This study investigated the associations between systemic arterial hypertension (SAH) and laboratory, anthropometric, heart rate variability (HRV), and obstructive sleep apnea markers. Methods: Cross-sectional study with 95 obese patients treated at Obesity Treatment and Surgery Center, located in Salvador, BA, Brazil. SAH data were obtained from electronic medical records of patients. To evaluate the association of SAH with the predictor variables, the sample was stratified in Normotense Group (NG) and Hypertensive Group (HG), and laboratory markers, body composition, polysomnography data, and HRV were measured. Results: The average age of the NG was 36.3 ± 10.1 and HG 40.4 ± 10.6 years, 73.7% were women in the NG and 57.9% in HG; 82.4% in HG had insulin resistance. In the multivarious logistics regression model with adjustments age, sex, height, and oxyhemoglobin saturation, SAH was inversely associated with fasting plasma glucose mg/dL (odds ratio [OR] = 0.96; 95% interval confidence [CI] = 0.92 - 0.99) and VFA cm² (OR = 0.98; 95% CI = 0.97 - 0.99). The area under curve the VFA was 0.728; CI 95% (0.620 - 0.836) and fasting plasma glucose 0.693; CI 95% (0.582 - 0.804). Conclusions: Lower VFA and fasting plasma glucose concentrations were inversely associated with SAH. These results indicate opportunities to improve the outcome in obese patients through counseling and clinical interventions.

Parkinson's disease (PD) is a degenerative disease that affects approximately 6.1 million and is primarily caused by the loss of dopaminergic neurons. Naphthoquinones have several biological activities explored in the literature, including neuroprotective effects. Therefore, this review shows an overview of natural and synthetic naphthoquinones with neuroprotective effects and with potential for the development of molecules for the treatment of PD. Many examples of natural naphthoquinones, such as shikonin, plumbagin and vitamin K, exerted a neuroprotective effect by preventing oxidative stress, in addition to multiple mechanisms. Synthetic naphthoquinones with inhibitory activity on the P2X7 receptor were also found, leading to a neuroprotective effect on Neuro-2a cells. It was found that naphthazarin can act as inhibitors of the MAO-B enzyme. Vitamin K and synthetic naphthoquinones hybrids with tryptophan or dopamine showed inhibition of the aggregation of α-synuclein. A library of synthetic derivatives of juglone and naphthazarin were able to protect Neuro-2a cells against neurodegenerative effects of neurotoxins. We report many examples of naphthoquinones that act in therapeutic pathways for the treatment of PD. In addition, routes for producing synthetic derivatives were also discussed. With the data presented, 1,4-naphthoquinones can be considered a promising class in the treatment of PD.

In order to fully perform their functions and be durable, mortars for renders and plasters are requested to have a set of characteristics that can vary with the type of exposure to external environmental actions and the type of substrate. Generally, they need moderate strength, high deformability, some water protection capability, good adhesion to the substrate, and compatibility with the pre-existent materials. The presence of water and its movement inside the pore structure of the mortars are among the most significant causes of degradation. Moreover, several authors consider that the main factors for durability and good performance of lime-based mortars are mostly related with the good quality of the binder and the use of adequate aggregates. This paper intends to study the effect of ageing on the properties and durability of air lime mortars, using aggregates of different mineralogy. For this purpose, different mortars compositions are exposed to an accelerated weathering test under defined conditions. The obtained characteristics are discussed and compared with the results obtained with the same mortars tested in laboratory conditions. The effects of the aggregate type on the durability of mortars seem to be linked to their effects on the mortars porous structure.

Climate changes caused by anthropogenic actions can directly and indirectly affect living beings, including parasites and their hosts. Changes such as water temperature, pH, distribution of nutrients in the aquatic environment are some examples that can interfere with the fish community, whether in open water or in production systems. In this review, we will show how climate change can affect the adaptation of hosts and parasites in the aquatic environment and how these parasites can be used for environmental monitoring.

We study in this work a dilute granular gas immersed in a thermal bath made of smaller particles with nonnegligible masses as compared with the granular ones. The kinetic theory for this system is developed and described by an Enskog--Fokker--Planck equation for the one-particle velocity distribution function. Granular particles are assumed to have inelastic and hard interactions, losing energy in collisions as accounted by a constant coefficient of normal restitution. The interaction with the thermal bath is based on a nonlinear drag force plus a white-noise stochastic force. To get explicit results of the temperature aging and steady states, Maxwellian and first Sonine approximations are developed. The latter takes into account the coupling of the excess kurtosis with the temperature. Theoretical predictions are compared with direct simulation Monte Carlo and event-driven molecular dynamics simulations. While good results for the granular temperature are obtained from the Maxwellian approximation, a much better agreement, especially as inelasticity and drag nonlinearity increase, is found when using the first Sonine approximation. The latter approximation is, additionally, crucial to account for memory effects like Mpemba and Kovacs-like ones.

Fiber-cement composites were prepared from cellulosic cotton residue (CCR) arise from sanding process (emerizing). The effect of different concentrations: 0.5% and 1%, and granulometry: thick (retained in a14 mesh sieve) and thin (retained in a 48 mesh sieve) of this residue were evaluated on tensile strength of cement slurries with seven (07) curing days. To characterize the CCR, TGA, FT-IR, SEM and XRD analysis were performed and the residue resistance in an alkaline environment was also evaluated. Splitting tensile strength test, known as Brazilian Test, was used to assess effects of the fibers on the mechanical behavior of cement matrix. Analyzing the results, the CCR proved to be resistant in an alkaline environment, meaning that it can withstand the alkaline environment of cement matrix. The results showed an improvement superior to 17% in tensile strength for 1% of CCR. Therefore, the CCR presents a great application potential in cement pastes used for oil well cementing that requires to increase its tensile strength, once a significant improvement was achieved with a low-residue employee.

Hepatitis C presents a significant global health challenge, necessitating early diagnosis and precise severity classification for timely medical intervention. This study explores the application of machine learning techniques to predict the severity of hepatitis C, leveraging an extensive dataset. Our approach encompasses rigorous data preprocessing, advanced model development, and fine-tuned hyperparameter optimization to ensure accurate and reliable predictions. We evaluated four classification models: Logistic Regression, Random Forest, Gradient Boosting, and Support Vector Machine (SVM), comparing their accuracy in classifying patients. The results showed that the Random Forest and Gradient Boosting models outperformed the others with an accuracy of approximately 93.50%, demonstrating their potential in assisting Hepatitis C diagnosis. Further model enhancements through hyperparameter tuning and feature engineering can improve the precision of Hepatitis C diagnosis, contributing to better patient care.

Accurate estimation of body fat percentage is essential for various health and fitness applications. Traditional methods for measuring body fat, such as underwater weighing, can be costly and inconvenient. In this study, we apply machine learning techniques to predict body fat percentage using easily accessible body measurements and data. The results highlight the effectiveness of regression models in estimating body fat, with Linear Regression, Ridge Regression, and Bayesian Ridge models achieving R-squared scores of approximately 74%, 73%, and 73%, respectively. These models provide a practical and cost-effective solution for individuals and professionals seeking reliable body fat estimates.

This article presents a study on brain tumor detection using the VGG-16 model, a convolutional neural network known for its performance in computer vision tasks. The aim of the study is to classify magnetic resonance imaging (MRI) images and accurately identify the presence of brain tumors. The dataset used consists of brain tumor MRI images, categorized into two classes: "NO" (no tumor) and "YES" (tumor). The methodology involves setting up the environment, importing and preprocessing the data, building the VGG-16 model, and evaluating its performance using metrics such as accuracy, precision, and recall. The results demonstrate an accuracy of approximately 88% on the validation set and 80% on the test set, indicating the potential of the VGG-16 model in supporting healthcare professionals in diagnosing brain tumors. The study contributes to the field of medical image analysis and offers insights into the application of deep learning for brain tumor detection.

This article presents a comparative analysis of three Machine Learning models, namely Logistic Regression, Decision Tree Classifier, and Random Forest Classifier, for prostate cancer detection. The models were trained and evaluated using clinical data, and their performance was assessed using various evaluation metrics. The results show that Logistic Regression achieved the highest accuracy (90%) among the three models, followed by Random Forest Classifier (76.67%) and Decision Tree Classifier (73.33%). Similarly, Logistic Regression demonstrated superior precision (95.65%) and F1 Score (93.62%), indicating its effectiveness in identifying true positive cases. However, the Decision Tree Classifier exhibited higher recall for the negative class (83.33%) compared to the positive class (70.83%), while Random Forest Classifier showed balanced recall for both classes (66.67% for negative and 79.17% for positive). These findings suggest that Logistic Regression outperforms the other models in terms of accuracy and precision, while the Decision Tree Classifier and Random Forest Classifier provide better recall for certain classes. The results highlight the potential of Machine Learning in prostate cancer detection and provide insights for further research and improvement of the models.

The overlap of visual items in data visualization techniques is a known problem aggravated by data volume and available visual space issues. Several methods have been applied to mitigate occlusion in data visualizations, such as Random Jitter, Transparency, Layout Reconfiguration, Focus+Context Techniques, etc. This paper aims to present a comparative study to read visual variables values with partial overlap. The study focuses on categorical data representations varying the percentage limits of partial overlap and the number of distinct values for each visual variable: Hue, Lightness, Saturation, Shape, Text, Orientation, and Texture. A computational application generates random scenarios for a unique visual pattern target to perform location tasks. Each scenario presented the visual items in a grid layout with 160 elements (10 x16), each visual variable had from 3 to 5 distinct values encoded, and the partial overlap percentage applied, represented by a gray square in the center o each grid element, were 0% (control), 50%, 60%, and 70%. Similar to the preliminary tests, the tests conducted in this study involved 48 participants organized into four groups, with 126 tasks per participant, and the application captured the response and time for each task performed. The result analysis indicates that the Hue, Lightness, and Shape visual variables are robust to high percentages of occlusion and gradual increase in encoded visual values. The Text visual variable show promising results for accuracy, and resolution time was a bit higher than the last visual variables mentioned. In contrast, the Texture visual variable presented lower accuracy to high levels of occlusion and more different visual encoding values. At last, the Orientation and Saturation visual variables got the highest error and worst perfomance rates during the tests.

Background and Objectives: Blood flow restriction (BFR) has been investigated as an alternative method combined with resistance training or AT to promote different health benefits for older people. Nevertheless, no study analyzed chronic effects of BFR on muscle activation in this population, and in some investigations, the application of BFR has been employed arbitrary pressures, which can be a serious methodological error, both from the results and of the risk to the health of the older. Thus, this study analyzed the effect of 24 weeks of walking with BFR on activation and muscle strength in elderly women with osteoporosis. Materials and Methods: Thirty older women (66.0±4.6 years) performed randomly to one of three training groups: WALK (moderate-intensity walking), WALK+BFR (low-intensity walking with BFR), or BFR (BFR alone). Muscle activation (sEMG) and strength of knee flexors and extensors were measured pre-intervention and after 12 and 24 weeks. Results: Only a trivial effect size (ES) for the WALK+BFR (ES= 0.16) was observed in sEMG of the knee flexors compared to WALK. A moderate effect was observed in sEMG of the knee extensors (ES= 0.65) for the WALK+BFR compared to the WALK. However, adverse effects were found in the strength of the knee flexors for the BFR (ES= −0.86) and WALK+BFR (ES= −0.69) compared to WALK. Adverse and null effects, respectively for the BFR (ES= −0.16) and WALK+BFR (ES= 0.06) groups, were also observed on the strength gain of the knee extensors. Conclusions: Low-intensity walk combined with BFR does not provide relevant chronic effects on strength gain or even limit muscle strength gain, however, due to greater activation of knee extensors over 24 weeks, it is possible to benefit from the use of similar strategies to obtain neuromuscular gains in the long‐term for elderly women with osteopenia and osteoporosis.

The aim of the present study was to investigate whether chronic undernutrition modifies the response to rostafuroxin in juvenile rats. Chronic undernutrition was induced in male rats using a multideficient diet known as Regional Basic Diet (RBD), mimicking alimentary habits in impoverished regions worldwide. Animals were given RBD – or a control/CTRL normal diet for rodents – from weaning to 90 days, and rostafuroxin (1 mg/kg body mass) or vehicle were orally administered during the last 30 days. Undernourished rats became hypertensive at 55–60 days of age (tail-cuff recording). During the last two days, the rats were hosted in metabolic cages to measure food/energy, water, Na+ ingestion, and urinary volume. Blood and kidneys were collected after euthanasia. Rostafuroxin increased food/energy and Na+ intake in CTRL and RBD rats but had opposite effects on Na+ balance (intake minus urinary excretion): negative in CTRL and positive in RBD. The drug normalized the decreased plasma Na+ concentration found in RBD rats, increased urinary volume in RBD but not in CTRL, and decreased and increased urinary Na+ concentration in the RBD and CTRL groups, respectively. Rostafuroxin decreased the ouabain-sensitive (Na++K+)ATPase and increased the ouabain-resistant, furosemide-sensitive Na+-ATPase from proximal tubule cells in both groups, and normalized the systolic blood pressure in RBD without effect in CTRL rats. We conclude that chronic undernutrition modifies the response of blood pressure, caloric metabolism, Na+ distribution in liquid compartments, mobilization of Na+ from non-osmotic compartments, Na+ and water balance, and activity of renal Na+-transporting ATPases to rostafuroxin.

In recent years, news media has been greatly disrupted by the potential of technologically driven approaches in the creation, production, and distribution of news products and services. Artificial intelligence (AI) has emerged from the realm of science fiction and has become a very real tool that can aid society in addressing many issues, including the challenges faced by the news industry. The ubiquity of computing has become apparent and has demonstrated the different approaches that can be achieved using AI. We analyzed the news industry’s AI adoption based on the seven subfields of AI: (i) machine learning; (ii) computer vision (CV); (iii) speech recognition; (iv) natural language processing (NLP); (v) planning, scheduling, and optimization; (vi) expert systems; and (vii) robotics. Our findings suggest that three subfields are being developed more in the news media: machine learning, computer vision, as well as planning, scheduling, and optimization. Other areas have not been fully deployed in the journalistic field. Most AI news projects rely on funds from tech companies such as Google. This limits AI’s potential to a small number of players in the news industry. We make conclusions by providing examples of how these subfields are being developed in journalism and present an agenda for future research.

With the recent advances in science and technology, more processing capability and data have become available, allowing a more straightforward implementation of data analysis techniques. Fortunately, the available online data storage capacity follows this trend, and vast amounts of data can be stored online freely or at accessible costs. As happens with every evolution (or revolution) in any science field, organizing and sharing this data is essential to contribute to new studies or validate the obtained results quickly. To facilitate this, we must guarantee interoperability between the existing datasets and the developed software, whether commercial or open source. This article explores this issue, analyzing the current initiatives to establish data standards and comparing some of the existing dataset online storage platforms. Through a Strengths, Weaknesses, Opportunities, and Threats (SWOT) analysis, it is possible to understand better the strategy that should be taken to improve the efficiency in this field, which directly depends on the data characteristics.

The paper primarily demonstrates that the three internal triangles formed by connecting any point on a midsegment with the vertices of a generic triangle satisfy the geometric Proof of the Pythagorean theorem in Euclidean geometry. Moreover, this study elucidates the Pythagorean relationships inherent within three-dimensional geometric constructs resulting from the arrangement of three-dimensional spatial triangles. This geometric relationship, akin to a generalized extension of the Pythagorean theorem, unveils a unique spatial region characterized by this harmonious area interrelation among triangles.

Principle of memristor presented by Leon Chua and time reversal based non-linear elastic wave spectroscopy (TR-NEWS) which can be applied to acoustic tomography are reviewed. Correlation of acoustic or electromagnetic nonlinear waves and its time reversed wave can produce strong signal. Materials like transducer or biological skin can be assumed to be composed of a large number of small elastic unit: hysteretic elementary unit (HEU), and one can take a HEU as a memristor whose operation depends on time. Relation between TR-NEWS and solitonic wave in fluid, and relation between decomposition of time reversal operator (DORT) and chaotic oscillation are discussed.

Senna rugosa is a species found in the Cerrado and used in folk medicine as a vermifuge and in the treatment of poisonous snakebites accidents. In this work, we identified the main secondary metabolites present in ethanolic extracts of the leaves (ELSR) and roots (ERSR) of S. rugosa and evaluated the potential cytoprotective effect against cellular macromolecular damage, as well as the cytotoxic properties of the extracts on the K562 and Jurkat leukemic cell lines. The identification of metabolites was done by liquid chromatography coupled with mass spectrometry. The antioxidant activities were investigated by direct ABTS•+ and DPPH• radical scavenging methods, protection against oxidative damage in proteins and DNA. The cytotoxic properties were investigated against healthy cells, isolated from human peripheral blood (PBMC) and leukemic cell lines. The leaf extract contains catechin, rutin, epigallocatechin derivatives, kaempferol glycosides, luteolin, and dimeric and trimeric procyanidins, while the root extract profile shows obtusichromoneside derivatives, 2-methoxystypandrone, stilbene derivatives, naphthopyranones, and flavanone derivatives. The extracts showed antioxidant activity, with IC50 of 4.86 ± 0.51 µg/mL and 8.33 ± 0.90 µg/mL in the ABTS assay for ELSR and ERSR, respectively. And in the DPPH• assay, the IC50 was 19.98 ± 1.96 µg/mL for ELSR and 13.37 ± 1.05 µg/mL for ERSR. The extracts protected macromolecules against oxidative damage at concentrations of 5 µg/mL. The cytotoxicity test against leukemic strains was observed after 24 and 48 hours of treatment. After 48 h, results against the K562 cell line demonstrate IC50 of 242.54 ± 2.38 µg/mL and 223.00 ± 2.34 µg/mL for ELSR and ERSR , respectively. While against the Jurkat cell line, these extracts showed IC50 of 171.45 ± 2.25 µg/mL and 189.30 ± 2.27 µg/mL, respectively Results on PBMC viability, demonstrate that the extracts showed selectivity for the leukemic cell lines. Together, our results reveal that the leaves and roots of S. rugosa have completely distinct and complex chemical compositions. This study expands the repertoire of identified chemical compounds and underscores their significant pharmacological potential in conditions related to oxidative stress and leukemia.

Let $\mathcal{N}$ be an arbitrary class of matroids, closed under isomorphism. For $k$ a positive integer, we say that $M \in \mathcal{N}$ is \emph{$k$-minor-irreducible} if $M$ has no minor $N \in \mathcal{N}$ such that $1\leq\left|E\left(M\right)\right|-\left|E\left(N\right)\right|\leq k $. Tutte's Wheels and Whirls Theorem establish that, up to isomorphism, there are only two families of 1-minor-irreducible matroids in the class of 3-connected matroids. More recently, Lemos classified the 3-minor-irreducibles with at least 14 elements in the class of triangle-free 3-connected matroids. Here we prove a local characterization for the 2-minor-irreducible matroids with at least 11 elements in the class of triangle-free 3-connected matroids. This local characterization is used to establish two new families of 2-minor-irreducible matroids in this class.

The growing interest related to the proposal of formal definition of a new geological period that has being called “Anthropocene” has introduced a buzzing dynamics in the scientific community, but its conduct is perhaps due to various interests involved in a discussion that has long surpassed the contours of the so-called “Geosciences”. Themes such as “Climate Change or Drift”, “Global Warming”, “Massive Extinction of Species” and “Loss of bio and geodiversity”, among others, are the wheel of a geomorphogenetic dynamics of anthropocentric origin, which leads the debate. But are the conditions for the formal establishment of a new morphosedimentary cycle following the Meghalayanian (Upper Holocene) Age? This work pursues a line of thought that seeks to answer these and other questions, based on the official position of the institutes that have the scientific competence for the formalization under consideration, and the formal criteria that should be considered for this purpose.

Unmanned Aerial Vehicles (UAVs) are being increasingly viewed as valuable tools to aid the management of farms. This kind of technology can be particularly useful in the context of extensive cattle farming, as production areas tend to be expansive and animals tend to be more loosely monitored. With the advent of deep learning, and Convolutional Neural Networks (CNNs) in particular, extracting relevant information from aerial images has become more effective. Despite the technological advancements in drone, imaging and machine learning technologies, the application of UAVs for cattle monitoring is far from being thoroughly studied, with many research gaps still remaining. In this context, the objectives of this study were threefold: 1) to determine the highest possible accuracy that could be achieved in the detection of animals of the Canchim breed, which is visually similar to the Nelore breed (\textit{Bos taurus indicus}); 2) to determine the ideal Ground Sample Distance (GSD) for animal detection; 3) to determine the most accurate CNN architecture for this specific problem. The experiments involved 1,853 images containing 8,629 samples of animals, and 15 different CNN architectures were tested. A total of 900 models were trained (15 CNN architectures * 3 spacial resolutions * 2 datasets * 10-fold cross validation), allowing for a deep analysis of the several aspects that impact the detection of cattle using aerial images captured using UAVs. Results revealed that many CNN architectures are robust enough to reliably detect animals in aerial images even under far from ideal conditions, indicating the viability of using UAVs for cattle monitoring.

Cancer cell lines are widely used as in vitro models of tumorigenesis, facilitating fundamental discoveries in cancer biology and translational medicine. Currently, there are few options for glioblastoma (GBM) treatment and limited in vitro models with accurate genomic and transcriptomic characterization. Here, a detailed characterization of a new GBM cell line, namely AHOL1, was conducted in order to fully characterize its molecular composition based on its copy number alteration (CNA) and transcriptome profiling, followed by the validation of key elements associated with GBM tumorigenesis. Large numbers of CNAs and differentially expressed genes (DEGs) were identified. CNAs were distributed throughout the genome, including gains at Xq11.1-q28, Xp22.33-p11.1, Xq21.1-q21.33, 4p15.1-p14, 8q23.2-q23.3 and losses at Yq11.21-q12, Yp11.31-p11.2 and 12p13.31 positions. Nine druggable genes were identified, including HCRTR2, ETV1, PTPRD, PRKX, STS, RPS6KA6, ZFY, USP9Y and KDM5D. By integrating DEGs and CNAs, we identified 57 overlapping genes enriched in fourteen pathways. Altered expression of several cancer-related candidates found in the DEGs-CNA dataset was confirmed by RT-qPCR. Taken together, this first comprehensive genomic and transcriptomic landscape of AHOL1 provides unique resources for further studies and identifies several druggable targets that may be useful for therapeutics and biologic and molecular investigation of GBM.

The orchid genus Brachystele Schltr. comprises 20 species distributed from Mexico to Argentina; 10 are found in Brazil. Anatomical studies of Orchidoideae Lindl. have been scarce, and the anatomy and histochemistry of Brachystele are still largely unknown. We characterized the vegetative organs of B. guayanensis (Lindl.) Schltr. using standard anatomical and histochemical microtechniques. Brachystele guayanensis was observed to display the anatomical characters commonly found in the vegetative organs of representatives of the Orchidaceae and Orchidoideae (including a uniseriate epidermis, thin cuticle, amphistomatic leaves, anomocytic, diacytic and tetracytic stomata, a homogeneous mesophyll, collateral vascular bundles, rhizomes with pericyclic fibers, roots with velamen, uniseriate exodermis, endodermis and pericycle). Histochemical tests confirmed the presence of lignin, proteins, and alkaloids, the lipidic nature of the cuticle, starch grains stored in spiranthosomes in the roots, and the composition of the raphides. Alkaloids were observed in great abundance, especially in the roots, and may have potentially useful medicinal activities, as has been observed in groups phylogenetically related to Brachystele.

This literature review aims to assess the extent and depth of existing angel investment literature, particularly focusing on the city of Florianópolis. Through an examination of available literature, the report seeks to elucidate the mechanisms and practices employed in angel investing within the Florianópolis ecosystem. This comprehensive analysis involves synthesizing scientific literature and incorporating insights from authoritative sources in the field. Key findings highlight the imperative for further research and exploration in this domain and the potential for increased angel investment within the studied ecosystem.

In this research, the concept of the instability of tension in Microgrid still becomes the focus of study and purpose. Scrutinously, First-Swing Instability occurs in the system in noted changes with properties of making the system unstable or restore to a state of stability. The latter calls itself as a phenomenon of re-synchronization. Allied to aspects of system instability, it is evident that by connecting fast electric chargers for battery-electric vehicles to the distribution system from microgrids, they increase the necessary basic electrical charges and reduce the stability of the electrical energy system. Transient electrical currents have the characteristic of severely impacting microgrids not prepared in connected states or island of the main system. The occurrences of the electromagnetic incompatibility of the inrush current, due to their unpredictability and intermittent characteristic, have complex identification studies. With the elevation of electricity demand by battery-electric vehicle chargers, concerns about the effects of the integration of the electricity grid increase proportionally. The research described in this article emphasizes the influence of fast chargers’ initialization on the power variation related to the re-synchronization phenomenon and its mitigation of the stability of electricity microgrid. An optimization algorithm based on particle swarm optimization (PSO) implements the development of virtual impedances. The PSO optimization algorithm analyzes all possible operating points and aims to maximize the stability index of microgrid, maintaining reactive energy incompatibilities at the minimum level supported. The fractional objective function facilitates the service to these goals simultaneously. The optimization algorithm is implemented in a case study and the corresponding virtual impedance is incorporated into the microgrid. Voltage levels are verified as a condition in the optimization process, comparing system effectiveness.

Quantum turbulence deals with the phenomenon of turbulence in quantum fluids, such as superfluid helium and trapped Bose-Einstein condensates (BECs). Although much progress has been made in understanding quantum turbulence, several fundamental questions remain to be answered. In this work, we investigated the entropy of a trapped BEC in several regimes, including equilibrium, small excitations, the onset of turbulence, and a turbulent state. We considered the time evolution when the system is perturbed and let to evolve after the external excitation is turned off. We derived an expression for the entropy consistent with the accessible experimental data, that is, using the assumption that the momentum distribution is well-known. We related the excitation amplitude to different stages of the perturbed system, and we found distinct features of the entropy in each of them. In particular, we observed a sudden increase in the entropy following the establishment of a particle cascade. We argue that entropy and related quantities can be used to investigate and characterize quantum turbulence.

One of the most burning topics in cybersecurity in 2023 will undoubtedly be the compliance with the Software Bill of Materials. Since the US president issued the Executive Order 14028 on Improving the Nation’s Cybersecurity, software developers have prepared and bills are transmitted to vendors, customers, and users, but they don’t know what to do with the reports they are getting. In addition, since software developers have identified the values of the Software Bill of Materials, they have been using the reports extensively. This article presents an estimate of 270 million requests per month, just from form one popular tool to one vulnerability index. This number is expected to double every year and a half. This simple estimate explains the urgency for automating the process. We propose solutions based on artificial intelligence and machine learning, and we base our tools on the existing FAIR principles (Findable, Accessible, Interoperable, and Reusable). This methodology is supported with a case study research and Grounded theory, for categorising data into axis, and for verifying the values of the tools with experts in the field. We showcase how to create, and share Vulnerability Exploitability eXchange data, and automate the Software Bill of Materials compliance process with AI models and a unified computational framework combining solutions for the following problems: (1) the data utilisation problem, (2) the automation and scaling problem, (3) the naming problem, (4) the alignment problem, (5) the pedigree, and provenance problem, and many other problems that are on the top of mind for many security engineers at present. The uptake of these findings will depend on collaborations with government and industry, and on the availability and the ease of use of automated tools.

The red seaweed Asparagopsis armata exhibits a strong invasive behaviour and is included in the list of the “Worst invasive alien species threatening biodiversity in Europe”. This seaweed has been shown to produce a large diversity of halogenated compounds with effective biological effects, deeply affecting rockpool species. Therefore, the present study aimed to investigate the biochemical responses to sublethal concentrations of Asparagopsis armata exudate on two coastal organisms, the marine snail Gibbula umbilicalis and the rockpool shrimp Palaemon elegans. Antioxidant defences superoxide dismutase (SOD) and glutathione-S-transferase (GST), oxidative damage endpoints lipid peroxidation (LPO) and DNA damage, the neuronal parameter acetylcholinesterase (AChE), as well as the fatty acid profile were evaluated. Results revealed different metabolic responses between species, indicating that A. armata exudate affected the organisms through different pathways. Despite previous studies indicating that the exudate effected G. umbilicalis’ survival and behaviour, this does not seem to result from oxidative stress or addressed neurotoxicity. On the other hand, for P. elegans, an inhibition of AChE and the decrease of antioxidant capacity concomitant with the increase of LPO, suggests neurotoxicity and oxidative stress as mechanisms of exudate toxicity for this species. For fatty acids, there were different profile changes between species, also more pronounced for P. elegans with a general increase in PUFA with exudate exposure, which commonly means a defence mechanism protecting from membrane disruption. Nonetheless, the omega-3 PUFAs ARA and DPA were increased in both invertebrates, indicating a common mechanism regulation of inflammation and immunity responses to this stress. This work provides further insight on the mechanisms of invertebrate response and tolerance to an expanding coastal environmental stress as is the marine invader A. armata.

Objective: To map the literature pertaining to adult Person-Centered Rehabilitation (PCR).Data Sources: Following our previously published scoping review protocol, data were identified through: three major databases, snowball searches and expert consultation.Study Selection: Two independent reviewers identified English-language papers which addressed adult physical rehabilitation and met one or more of the six pre-defined inclusion categories for PCR content. Data Extraction: Two independent reviewers extracted key characteristics of included papers (e.g. aims, methods, participants). Quantitative methods (descriptive statistics, regression analysis) and qualitative content analyses were used to synthesize the results. Data synthesis: Of 5084 unique records initially screened, 145 papers were included: 111 empirical, including 11 systematic reviews. Empirical papers had data from 13498 clients and 3849 providers, in total. Yearly publications grew exponentially from 2000 to 2017 (r²= 0.65; p<0.01). Publications were unevenly distributed by countries (e.g. United States’ publications per population size was 45 times lower than New Zealand’s). Most papers focused in more than one profession, setting-type or health conditions, respectively 57.2%, 66.2%, and 60.7%. Finally, more than half of the empirical papers (53.2%) studied implementation of PCR approaches, including its effect. Conclusion: This scoping review synthesizes key characteristics and publication trends in the PCR literature, which is mainly empirical and growing exponentially over time. Stakeholders can use the identified trends, gaps, and literature map to guide further PCR research, and both clinical and organizational practices. The high prevalence of papers focused on multiple professions, settings-type, or health conditions reinforces the need for developing a transdisciplinary, trans-service model of PCR, which will be derived from a thematic analysis of this body of literature.

Drug-induced movement disorders (DIMDs) are a group of neurological conditions caused by the use of certain medications. These disorders can significantly impact a person's quality of life and are essential to recognize and manage. This article provides an overview of the causes, symptoms, and treatment of DIMDs. DIMDs can manifest in various forms, including parkinsonism, tardive dyskinesia, dystonia, and akathisia. They are most commonly associated with medications such as neuroleptics, antidepressants, antipsychotics, antiemetics, and anticonvulsants. Risk factors for developing DIMDs include age, genetics, duration of medication use, and dose of medication. Symptoms of DIMDs can range from mild to severe and may include tremors, rigidity, bradykinesia, and involuntary movements. These symptoms can significantly impact a person's ability to perform daily activities and lead to social isolation and decreased quality of life. DIMD diagnoses are based on clinical evaluation, including a thorough medical history and physical examination. Imaging studies such as MRI or CT scans may also be used to rule out other possible causes of symptoms. Treatment of DIMDs involves the withdrawal of the offending medication if possible. Pharmacological treatments such as anticholinergic drugs, benzodiazepines, and dopamine agonists may also be used to manage symptoms. Non-pharmacological treatments such as physical, occupational, and speech therapy can also be beneficial. DIMDs are necessary neurological conditions that can significantly impact a person's quality of life. Early recognition and management of these disorders are essential for optimizing outcomes. Further research is needed to understand the underlying mechanisms of DIMDs better and to develop more effective treatments.

Diabetes Mellitus is one of the most prevalent chronic diseases in the world and one of its main features is chronic hyperglycemia. Among the therapeutic forms used to control the pathology are pharmacotherapy and the use of other alternatives such as regular exercise, which participates in glycemic control and the ingestion of plant extracts with antioxidant effects in the body. Among the different plants used, curcumin is a possible plant to be used to attenuate the hyperglycemic picture triggered by Diabetes Mellitus. Some studies suggest that this plant is antioxidant and hypoglycemic. The review aimed to know the antioxidant and hypoglycemic potential of curcumin supplementation in DM. The search was performed considering articles published between 2010 to 2019, in English and Portuguese, and a theoretical survey of relevant information was conducted in the main databases of scientific publications: Virtual Health Library and its indexed databases as Pubmed, LILACS, Scielo and Scientific Electronic Library Online. The associated use Turmeric and Physical Exercise demonstrated antioxidant, anti-inflammatory and hypoglycemic activity caused by Diabetes Mellitus. We may suggest that these are potential therapeutic ways to improve the quality and survival of diabetic patients.

Movement disorders encompass a diverse group of neurological conditions characterized by abnormal voluntary or involuntary movements. These disorders can be classified broadly into hyperkinetic and hypokinetic disorders. Excessive, involuntary movements, including tremors, dystonia, chorea, and myoclonus characterize hyperkinetic disorders. Tremors are rhythmic, involuntary movements occurring at rest or during movement. Dystonia involves sustained muscle contractions, leading to twisting and repetitive movements or abnormal postures. Chorea manifests as brief, irregular, involuntary movements that flow from one body part to another. Myoclonus consists of sudden, brief muscle contractions, either spontaneous or in response to a stimulus. Hypokinetic disorders are characterized by a lack of movement or difficulty initiating movement, as seen in Parkinson's disease and Parkinsonism. Parkinson's disease is a progressive neurological disorder that primarily affects movement, causing tremors, stiffness, and difficulty with balance and coordination. Parkinsonism refers to a group of disorders with similar symptoms to Parkinson's disease but with different underlying causes. Diagnosing movement disorders involves a thorough clinical evaluation, including a detailed medical history and physical examination. Neuroimaging studies such as MRI, CT scans, and functional imaging techniques may be used to assess brain structure and function. Additionally, laboratory tests, including genetic testing and biochemical markers, can help diagnose certain movement disorders.

This study proposes a framework to integrate Sustainability within Management Systems Standards and subsequently implement and disclose Sustainable Development goals and results. Moreover, it investigates the SD goals (SDGs) and results (SDRs) that Portuguese organizations with Integrated Management Systems (IMSs) disclose to their interest parties. The study, supported by content analysis, highlights that the four more frequently disclosed SDGs are “life on land“(50.0%), “industry, innovation, and infrastructure” (47.1%), “responsible consumption and production” (47.1%), and “partnerships for the goals” (47.1%). Conversely, the four SDRs most frequently disclosed are “employment” (82.4%), “economic performance” (79.4%), “anti-corruption” (64.7%), and “occupational health and safety” (61.8%). Hence, SDGs disclosure emphasizes the environmental dimension, while SDRs disclosure highlights the social dimension (economic dimension present in both SDGs and SDRs). Finally, the disclosure of SDGs and SDRs in institutional reports presents a positive and strong correlation that is statistically significant. Overall, the contributions of this research are twofold. First, it supports the integration of the SDGs within organizations, and second, it stimulates the demonstration of their impacts on the SDGs (the SDRs).

Background: Fungi are ubiquitous microorganisms that are easily dispersed through the air. In healthcare environments, indoor air can favor the spread of healthcare-associated fungal infections, compromising mainly immunocompromised hospitalized individuals. Thus, this study aimed to evaluate the indoor air contamination in healthcare environments, investigating mainly the presence of potentially pathogenic yeasts. Methods: Indoor air samples were collected from twelve healthcare environments (hospital and medical clinics). After the growth, isolation, and purification of the yeast colonies, the isolates were identified by polymerase chain reaction using species-specific primers for yeasts of the genus Candida and sequencing of D1/D2 domains of the large ribosomal subunit (LSU rRNA). Results: Fourteen yeast species were identified, including emerging pathogens. Species of clinical importance such as Candida parapsilosis, Candida orthopsilosis, Candida glabrata, Rhodotorula mucilaginosa, and Trichosporon mucoides were present. C. Parapsilosis was the most prevalent species, followed by Rodothorula mucilaginosa. Conclusions: The present study shows that potentially fungal pathogens were present in air samples from healthcare environments, proving the role of indoor air in spreading infections. Thus, monitoring air quality in healthcare environments is a fundamental approach in developing infection control measures, especially those related to invasive fungal infections.

(1) Background: Hemispherotomy is the generally accepted treatment for hemispheric drug resistant epilepsy (DRE). Lateral or vertical approaches are performed according to the surgeon's preference. Multiples technical variations have been proposed since Delalande first described his vertical technique. We propose a sub-insular variation of the vertical parasagittal hemispherotomy (VPH) and describe our case series of patients operated on with this procedure. (2) Methods: a continuous series of patients operated on by the senior author (CR) with the modified sub-insular VPH was retrospectively analyzed. We report the demographic pre-operative characteristics, epilepsy and functional outcome as well as the surgical complications.(3) Results: Twenty-five patients were operated on between August 2008 and August 2023, twenty-three of them have at least a 3-month follow-up. On this last group 86,3% of patients were seizure-free. Only two patients developed post-operative hydrocephalus (8.7%), all patients with autonomous preoperative walk and 86,3% of the total series were able to walk without assistance (86.3%) and perform adapted social activities at last follow-up.(4) Conclusion: The modified vertical parasagittal sub-insular hemispherotomy is a successful surgical technique for hemispheric DRE with seizure freedom rates similar to the biggest series reported in the literature. Compared to other series, patients operated with our modified technique had a lower rate of postoperative hydrocephalus and excellent long-term motor and cognitive outcome.

This paper aims to provide the reader with an organic view of the eyewear sector considering both market and quality aspects and evaluating the role of Industry 4.0 in process and product innovation for managing consumer health, analyzing a case study of a leading multinational company in the eyewear and ophthalmic lenses sector. The research has been developed with a qualitative approach. The study is a conceptual development and it uses an exploratory interview to create a single case study. The case study was developed with the realization by the researcher of a semi-structured interview. The selected interlocutor was the Innovation Manager of Alpha Optics. it has been decided to focus the attention on this figure, as it was responsible for the realization and introduction into the company of Industry 4.0 enabling technologies for developing health innovations. From this case study it was possible to observe how the connection with the trends that influence the demand for eyeglasses is a driving factor for product innovation. Products increasingly adapted to the needs of young people and the use of digital devices seem to be the ones on which the greatest number of innovations are concentrated.

Land and climate are strongly connected through multiple interface processes and climate change may lead to significant changes in land use. In this study, high-resolution observational gridded datasets are used to assess modifications in the Köppen-Geiger and Worldwide Bioclimatic (WBCS) Classification Systems, from 1950‒1979 to 1990‒2019 in Portugal. A compound Bioclimatic-Shift Exposure Index (BSEI) is also defined to identify the most exposed regions to recent climatic changes. The temporal evolution of land cover with vineyards and olive groves between 1990 and 2018, as well as correlations with areas with bioclimatic shifts, are analyzed. Results show an increase (decrease) of CSa Warm Mediterranean climate with hot summer (CSb, warm summer) of 18.1% (‒17.8%). The WBCS Temperate areas also reveal a decrease of ‒5.11%. Arid and semi-arid ombrotypes areas increased, conversely to humid to sub-humid ombrotypes. Thermotypic horizons depict a shift towards warmer classes. BSEI highlights the most significant shifts in northwestern Portugal. Vineyards have been displaced towards regions that are either the coolest/humid, in the northwest, or the warmest/driest, in the south. For oliviculture, the general trend for a relative shift towards cool/humid areas suggests an attempt of the sector to adapt, despite the cover area growth in the south. As vineyards and olive groves in southern Portugal are commonly irrigated, options for the intensification of these crops in this region may threaten the already scarce water resources and challenge the future sustainability of these sectors.

The WASP-Index is computed over Iberia for three monthly timescales in 1961-2020, based on an observational gridded precipitation dataset (E-OBS), and in 2021-2070, based on bias-corrected precipitation generated by a six-member climate model ensemble from EURO-CORDEX, under RCP4.5 and RCP8.5. The WASP performance in identifying extremely dry or wet events, reported by the EM-DAT disaster database, is assessed for 1961–2020. An overall good agreement between the WASP spatial patterns and the EM-DAT records is found. The areolar mean values revealed an upward trend in the frequency of occurrence of intermediate-to-severe dry events over Iberia, which will be strengthened in the future, particularly for the 12m-WASP intermediate dry events under RCP8.5. Besides, the number of 3m-WASP intermediate-to-severe wet events is projected to increase, mostly the severest events under RCP4.5, but no evidence was found for an increase in the number of more persistent (12m-WASP) wet events under both RCPs. Despite important spatial heterogeneities, an increase(decrease) of the intensity, duration, and frequency of occurrence of the 12m-WASP intermediate-to-severe dry(wet) events is found under both scenarios, mainly in the southernmost regions of Iberia, thus becoming more exposed to prolonged and severe droughts in the future, corroborating the results from previous studies.

Aim: To investigate how much aerobic and resisted physical exercise affects the behavior of AST and ALT proteins in the NAFLD spectrum. Background: Non-alcoholic fatty liver disease (NAFLD) is a pathology resulting from the excessive accumulation of triglycerides in the liver. The pathophysiology of the disease comes from several mechanisms, among them, metabolic, environmental, and genetic. The measurement of liver enzymes, aspartate aminotransferase (AST), and alanine aminotransferase (ALT) are essential to perform a differential diagnosis of NAFLD with other pathologies that affect the liver. The non-pharmacological treatment of NAFLD is based on aerobic and resisted physical exercise, and one of its aims is to reduce the inflammatory markers AST and ALT. Materials and Methods: Systematic review carried out in PubMed, Scopus, Embase, and Cochrane databases. Clinical trials that evaluated the effect of physical exercise on NAFLD on AST and ALT enzymes were included. Results: A total of 24 clinical trials met the inclusion criteria, with a sample size of 1141 participants, aged 20-82 years. The study protocol varied between aerobic exercise and resistance exercise with a weekly frequency between 2-6 times a week, a duration of 20-90 minutes for aerobics, and an intensity between 50-80% of peak VO2 and/or maximum HR for the resisted. Of the 24 studies included, only five showed improvements in both enzymes in the intervention group. Conclusion: Physical exercise cannot make significant changes in the behavior of AST and ALT liver parameters.

A single paragraph of about 200 words maximum. For research articles, abstracts should give a Ultra-high performance concrete (UHPC) has gained worldwide popularity because of its notable mechanical response. This research studied the compressive strength, modulus of elasticity, and flexural tensile strength of UHPC. Batches were made with the addition of steel and PVA fibers using a standard procedure defined in the research. The experimental data from the compressive strength test was analyzed in the Statistica 10 software to investigate the fibers' influence on UHPC's mechanical properties. An analysis of the elastic modulus prediction was carried out according to international standards. It was found that the normalized equations for the elastic modulus are not adequate for its estimation. The statistical analysis indicated that the range of fiber quantities analyzed did not significantly affect the compressive strength and the elastic modulus. Regarding the optimized mix, its flexural tensile strength indicates that the fiber content must be higher for UHPC to be suitable for structural use.

Scanning electron microscopy (SEM) is a powerful tool in the domain of material science, mining, and geology, owing to its enormous potential to provide unique insights into the micro and nanoscale worlds. This comprehensive review discusses the background development of SEM, basic SEM operation including the specimen preparation and imaging process, and fundamental theoretical calculations underlying the SEM operation. It provides foundational understanding to the engineers and scientists, who never got a chance to dig in-depth into the SEM, to understand the working and development of this robust analytical technique. The present review covers how SEM has been serving as a crucial tool in mineral characterization, with specific discussions on the working and research fronts of SEM-EDX, SEM-AM, SEM-MLA, and QEMSCAN. With automation gaining pace in the development of all spheres of technology, the understanding of uncertainties in SEM measurements is very important. The constraints in mineral phase identification by EDS spectra and sample preparation are conferred. In the end, future research directions for SEM are analyzed with the possible incorporation of machine learning, deep learning, and artificial intelligence tools, for automating the process of mineral identification, quantification, and efficient communication with the researchers, so that the analytical process robustness and objectivity can be improved, and the analysis time and the involved costs can be brought down. This review also discusses the idea of integrating robotics with SEM, to make the equipment portable, so that further mineral characterization insights can be gained not only on earth but also on other terrestrial grounds.

Biocomposite membranes based on polylactic acid (PLA) and cellulose nanocrystals (CNCs) were developed using a scientific approach. Dicumyl peroxide (DCP) was used as a polymerization ini-tiator, while tin octoate (Sn(Oct)2) and triphenylphosphane (P(C6H5)3) were used as catalysts. A torque rheometer was used to mix the components of the biocomposite, and thin films was prepared by solvent casting. Fourier transform infrared (FTIR) spectroscopy confirmed the coupling between the PLA and CNCs. Field emission scanning electron microscopy (FESEM) showed that the CNCs were well-dispersed in the PLA matrix with an unimodal particle size distribution and a maximum particle size of around 200 nm. Thermogravimetric analysis (TGA) and differential scanning calo-rimetry (DSC) analysis demonstrated good thermal stability and improved biodegradability of the biocomposite membrane compared to pure PLA. Mechanical characterization showed a Young's modulus of 1.65 GPa, which is comparable to that of other composite materials, and a maximum tensile strength of 20.31 MPa, which is higher than that of pure PLA. These results suggest that the developed biocomposite membrane has potential applications in water filtration, food packaging, and biomedical devices.

This article provides a comprehensive analysis of the global gas and liquefied natural gas (LNG) markets. The article begins by discussing the increasing demand for gas and LNG, particularly in Asia, as countries aim to transition to cleaner sources of energy. It explores how market volatility has led to energy security interventions and lasting economic and emissions impacts. It then explores the global supply and demand dynamics, highlighting the structural change expected in the market and the competition between Europe and Asia for limited new LNG supply. The article also focuses on Europe's increased flexibility and dependence on LNG imports, which have risen by 60% to 121 million tonnes, offsetting lower Russian pipeline imports. Furthermore, the article delves into global supply and demand dynamics, how the market is expected to remain tight, and how record gas and LNG prices have led to demand reductions. Additionally, it analyzes the future outlook and investment needs, highlighting the continued uptake of gas in heavy-duty transport and the need for further investment to avoid a supply-demand gap. The article concludes with an analysis of the implications for the future of the global gas and LNG markets.

Monitoring volatile organic compounds (VOCs) places a crucial role in environmental pollutants control and indoor air quality. In this study, a metal-oxide (MOx) sensor detector (used in a commercially available monitor) was employed to delineate the composition of air containing three common VOCs (ethanol, acetone and hexane) under various concentrations. Experiments with a single component and double components were conducted to investigate how the solvents interact with the metal oxide sensor. The experimental results revealed that the affinity between VOC and sensor was in the following order: acetone > ethanol > n-hexane. A mathematical model was developed, based on the experimental findings and data analysis, to convert the output resistance value of the sensor into concentration values, which in turn can be used to calculate a VOC-based air quality index. Empirical equations were established based on inferences of vapor composition versus resistance trends, and on an approach of using original and diluted air samples to generate two sets of resistance data per sample. The calibration of numerous model parameters allowed matching simulated curves to measured data. As such, the predictive mathematical model enabled quantifying not only the total concentration of sensed VOCs, but also estimating the VOC composition. This first attempt to obtain semi-quantitative data from a single MOx sensor, despite remaining selectivity challenges, is aimed at expanding the capability of mobile air pollutants monitoring devices.

Plant responses to different light and water availability are variable among species and their re-spective phenotypic plasticity, and the combination between these two abiotic factors can alleviate or intensify stressful effects. This study aimed to evaluate the impacts of exposure time of Cedrela fissilis Vell. seedlings to different water and light availability and the interaction of these factors. Seedlings were submitted to combinations of three shading levels – SH (0, 30 and 70%) and three water regimes based on the water holding capacity (WHC) in the substrate, constituting nine cul-tivation conditions: T1 – 0% SH + 40% WHC; T2 – 0% SH + 70% WHC; T3 – 0% SH + 100% WHC; T4 – 30% SH + 40% WHC; T5 – 30% SH + 70% WHC; T6 – 30% SH and 100% WHC; T7 – 70% SH + 40% WHC; T8 – 70% SH +70% WHC; T9 – 70% SH + 100% WHC. C. fissilis seedlings respond to water deficit, here represented by 40% WHC, regardless of exposure time, and when cultivated in full sun, the stressful effects were enhanced, acting in a synergistic manner. The condition that provided better gas exchange performance and greater total dry mass accumulation for C. fissilis seedlings was 30% shading combined with 100% WHC. C. fissilis seedlings have physiological plasticity and resilience to survive under different water and light conditions.

Oxytocin (OXT), a pro-social peptide, is increasingly recognized as a potential protective substance against drug addiction. In the context of ethanol, previous researches have shown OXT properties to reduce self-administration, alleviate motor impairment in rodents, and reduce craving in humans. However, its role in behavioral sensitization, a neuroadaptive response resulting from repeated drug exposure linked to increased drug incentive, remains unexplored. OXT is also associated with modulating the Hypothalamic-Pituitary-Adrenal (HPA) axis, with corticosterone well-known as a significant factor in behavioral sensitization development. This study aimed to investigate the effects of Carbetocin (CBT), an analogue of OXT, on the expression of behavioral sensitization to ethanol and concurrent alterations in plasma corticosterone levels in male and female Swiss mice. We also aimed to confirm previous studies on OXT impact on ethanol consumption in male mice, but with a focus on CBT, using the two-bottle choice model and drinking in the dark (DID) methodology. For the sensitization study, mice received either ethanol (1.8 g/kg, ip) or saline treatments daily for 15 consecutive days, followed by treatment with carbetocin (0.64 mg/kg, ip) or a vehicle for 6 days. Subsequently, on day 22, all animals underwent an ethanol challenge to assess the expression of behavioral sensitization. Plasma corticosterone levels were measured on days 21 and 22. CBT effectively prevented the expression of ethanol-induced behavioral sensitization in both male and female subjects, with no alterations detected in corticosterone levels. In the ethanol consumption study, following an initial phase of ethanol acquisition, mice underwent a 6-day treatment with CBT i.p or saline before being reexposed to ethanol. We also found a reduction in ethanol consumption due to CBT treatment. In conclusion, carbetocin emerges as a promising and effective intervention in mitigating ethanol-induced behavioral sensitization and reducing ethanol intake, highlighting its potential significance in alcohol addiction treatment.

The goal of this study was to characterize the initial growth trajectory of Epicrates assisi, 1 Epicrates cenchria, and Epicrates crassus snakes raised in captivity. An exponential model with 2 parameters for birth weight (A) and growth rate (k) was fitted for each animal. There was a significant 3 difference A and k among the three species, the means (standard error) for A and k parameters were 4 31 (0.3) g and 0.0027 (0.00006) for E. assisi, 27.6 (0.6) g and 0.0046 (0.00013) for E. cenchria and 25.9 5 (1.4) g and 0.0033 (0.00027) for E. crassus. We showed a significative variability between species for 6 initial growth trajectory. In addition, we also demonstrated the existence of variability within species, 7 which can be used to change the growth trajectory of snakes, being a tool for selection and genetic 8 improvement.9

This comprehensive analysis thoroughly examines the topic of adversarial attacks in artificial intelligence (AI), providing a detailed overview of the various methods used to compromise machine learning models. It explores different attack techniques, ranging from the simple Fast Gradient Sign Method (FGSM) to the intricate Carlini and Wagner Attack (C&W), emphasising the wide range of adversarial approaches and their intended goals. The discussion also distinguishes between targeted and non-targeted attacks, highlighting the adaptability and versatility of these malicious efforts. Additionally, the study delves into the realm of black-box attacks, revealing the capability of adversarial strategies to compromise models even with limited knowledge. Real-life examples illustrate the tangible consequences and potential dangers of adversarial attacks in various fields such as self-driving cars, multimedia, and voice assistants. These cases highlight the difficulties in ensuring the legitimacy and dependability of AI-powered technologies and programs. The article stresses the importance of ongoing research and innovation to address the growing difficulties posed by advanced methods like deepfakes and disguised voice commands in preserving the security of AI systems. This study provides valuable insights on how different adversarial strategies and defence mechanisms interact within AI. The results emphasise the urgent need for stronger and more secure AI models to combat the increasing number of adversarial threats in today's AI landscape. These findings can guide future research and innovations in developing more resilient AI technologies that can better withstand various adversarial vulnerabilities and challenges.

Finding the proper entropy functional associated with the inelastic Boltzmann equation for a granular gas is a yet unsolved challenge. The original H-theorem hypotheses do not fit here and the H-functional presents some additional measure problems that are solved by the Kullback–Leibler divergence (KLD) of a reference velocity distribution function from the actual distribution. The right choice of the reference distribution in the KLD is crucial for the latter to qualify or not as a Lyapunov functional, the “homogeneous cooling state” (HCS) distribution of the freely cooling system being a potential candidate. Due to the lack of a formal proof, the aim of this work is to support this conjecture aided by molecular dynamics simulations of inelastic hard disks and spheres in a wide range of values for the coefficient of restitution (α). Our results reject the Maxwellian distribution as a possible reference, whereas reinforce the HCS one. Moreover, the KLD is used to measure the amount of information lost on using the former rather than the latter, and reveals a nonmonotonic dependence with α. Additionally, a Maxwell-demon-like velocity-inversion experiment highlights the microscopic irreversibility of the granular gas dynamics.

The flavor, aroma and color of coffee may change due to mechanical damage, reducing its qual-ity. To measure the mechanical response of materials, compression tests can be performed, de-termining the effect of force application on the mechanical behavior of the fruit at different stages of ripeness. In this context, this study aimed to analyze the deformation, strain energy and equivalent von Mises stress of coffee fruits at mature, semi-mature and immature maturation stages and compressed by collapse forces. Compression in three directions (x, y and z) was sim-ulated on coffee fruit models using the finite element method, with a compression support in the direction opposite to the force application axis. The numerical simulation of the compression process allowed to verify that the more mature the fruit, the greater the associated mean defor-mation (2.20 mm mm-1, 0.78 mm mm-1 and 0.88 mm mm-1), the lower the mean strain energy (0.07 mJ, 0.21 mJ and 0. 34 mJ) and the lower the mean equivalent von Mises stress (0.25 MPa, 1.03 MPa and 1.25 MPa), corresponding to ripe, semi-ripe and immature fruits; and these proper-ties may be used to analyze how processes in the production chain affect the amount of mechan-ical damage.

Although advertising literacy leads to critical thinking in the face of advertising, but so far, no action has been taken in Iran regarding a tool to measure this type of literacy. And after the investigations, it was determined that although much research has been done on advertising, but the lack of appropriate measurement tools to measure the level of advertising literacy is clearly evident. Therefore, this research provides a valid tool for measuring advertising literacy from students' perspective. In this study, referring to the dimensions of advertising literacy from the perspective of Malmelin (2010) and the views of related professors, a questionnaire was developed and to determine the validity of the structure, confirmatory factor analysis was used. In this study, the statistical population was high school students, considering the impact of advertising in this age range; finally, a tool with four dimensions of informational literacy, aesthetic literacy, rhetorical literacy and promotional literacy was obtained. According to the confirmation of this tool in the present study, it can be used to examine the status of items, their order and prioritization from the perspective of the mentioned population.

Molecular studies regarding regulatory elements such as small ncRNAs and their mechanisms are poorly understood in infectious diseases. Tuberculosis is one of the oldest infectious diseases of humanity, and it is still a challenge to prevent and treat it. The control of the infection as well as its diagnosis are still complex, and treatments used are linked to several side effects. This study aimed to investigate miRNA’s expression profile to identify possible biomarkers for tuberculosis. We applied NGS techniques to investigate miRNA’s global expression profile from blood samples of infected patients with tuberculosis, their respective healthy physicians, and external healthy individuals as controls. Samples from 22 individuals run through a differential expression, target genes, gene set enrichment, and miRNA-gene network analysis. We observed 153 altered miRNAs, among which, only three DEmiRNAs (hsa-let-7g-5p, hsa-miR-486-3p and hsa-miR-4732-5p) were found between the investigated patients and their respective physicians. These DEmiRNAs are suggested to play an important role in granuloma regulation and their immune physiopathology. Our results propose that miRNAs may be involved in immune modulation, regulating the repertoire of genes expressed in the immune system’s cells. Our findings encourage the application of miRNAs as potential biomarkers for tuberculosis.

The pandemic of Covid-19 has contributed to the increase of the number of cases of anxiety, depression, and stress, especially in vulnerable workers. The objective of this study was to analyze factors associated with mental health of waste pickers and street sweepers in Brasília, Brazil, during the Covid-19 pandemic. It was a cross-sectional cohort study with a quantitative approach. SRQ-20 test was used to assess mental health. The study sample included 886 workers: 601 street sweepers and 285 waste pickers. Of the total, 71 workers (8.0%) had SRQ-20 ≥ 7, which is equivalent to adverse mental health. The characteristics associated with adverse mental health were women (PR: 3.36; 95%CI:1.86;6.08), worker between 18-39 years old (PR: 2.19; 95% CI 1.32;3.65), waste pickers (PR: 1.65; 95%CI:1.01;2.70), worker who reported two (PR: 3.24; 95%CI:1.72; 6.12), three or more (PR: 4.73; 95%CI:2.40;9.32) health problems. For the symptoms, 17.05% of the people interviewed said they felt sad and 18.25% nervous, tense, and worried. Female waste pickers, young adults, with many health problems were more susceptible to adverse mental health and it doesn't just affect them, but also their families. Public policies are needed to protect these professionals so that they can work safely and establish early interventions to maintain these workers' mental integrity.

For many decades, X-ray diffraction (XRD) has been used for material characterization. With the recent development in material science understanding and technology, various new materials are being developed, which requires upgrading the existing analytical techniques such that intricate problems can be solved. Although, XRD is a well-established non-destructive technique, it still requires further improvements in its characterization capabilities, especially when dealing with complex mineral structures. The present review conducts comprehensive discussions on atomic crystal structure, XRD principle, its applications, uncertainty during XRD analysis, and required safety precautions, all in one place. It further discusses the future research directions, especially the use of artificial intelligence and machine learning tools for improving the effectiveness and accuracy of XRD technique for mineral characterization. It has been focused that how XRD patterns can be utilized for a thorough understanding of the crystalline structure, size, and orientation, dislocation density, phase identification, quantification, and transformation, information about lattice parameters, residual stress, and strain, and thermal expansion coefficient of materials. All these important discussions on XRD for mineral characterization are compiled in this short yet comprehensive review that would benefit specialists and engineers in the chemical, mining, iron, metallurgy, and steel industries.