This study presents a novel polyurethane-activated carbon composite (PACC) as an effective and sustainable adsorbent for treating lead-ion-contaminated waters. The PACC was characterized using SEM-EDX, FTIR, BET, XRD, and TGA to evaluate its physicochemical and thermal properties. Furthermore, the PACC was employed in an experimental column adsorption setup to investigate its adsorption performance and to develop a dynamic method suitable for industrial implementation. Parameters such as bed height (50, 100, 150 mm), flow rate (4, 6, 8 mL min-1), pH (2, 4, 6), and initial metal ion concentrations (10, 50, 100 mg L-1) were examined. The experimental data exhibited strong agreement with the Thomas and Yoon-Nelson models (R2 ≥ 0.96), indicating efficient adsorption mechanisms. Remarkably, the depleted adsorbent has the potential for facile regeneration without substantial loss in capacity. The PACC demonstrated excellent adsorption performance for lead ions in aqueous solutions in a fixed-bed column system. Thus, the novel PACC material holds potential for scalable application in industrial settings to address water pollution challenges, especially in regions with uncontrolled effluent discharge.

Hypoxia represents one of the key factors that stimulate the growth of leukemic cells in their niche. Leukemic cells in hypoxia are forced to reprogram their original transcriptome, miRNome, and metabolome. How the coupling of miRNAs/mRNAs helps to maintain or progress the leukemic status is still not fully described. MicroRNAs (miRNAs) regulate practically all biological processes within cells and play a crucial role in leukemia development/progression. Here we worked with the human cell line MEC-1 (human chronic lymphocytic leukemia (CLL)) where we deleted mature miR-155 by CRISPR/Cas9. MEC-1 cells in hypoxia showed a higher proliferation rate with a relatively low level of apoptosis. Interestingly, miR-155 deficiency decreased the proliferation rate in both, normoxia and hypoxia. Besides common hypoxia-related genes (HIF1α, EGLN1, VHL, HK1, and HK2), we also measured, genes for glucose transporters SLC2A1 (GLUT1) and SLC2A3 (GLUT3). Surprisingly, only SLC2A3 (GLUT3) showed significant overexpression in hypoxia conditions in miR-155 deficient MEC-1cells which points to the possible novel target of miR-155 in CLL. Increased glucose uptake and decreased lactate support our hypothesis that miR-155 deficiency and hypoxia transform cell metabolism. To conclude, miR-155 deficiency and hypoxia-impaired glucose metabolism stimulate GLUT3 in CLL cells.

According to circular economy principles, the recycling and reuse of waste tyre rubber is one of the most advanced and ecological waste disposal technologies. Each year about 19 million tons of tyres are produced, and this amount is increasing each year. One of the most innovative ways to recycle rubber waste is devulcanization. There are many methods of rubber devulcanization, but the most popular are grinding and chemical. In this article devulcanized rubber granules were used for the preparation of rubber samples. Two of them were obtained by the grinding method and one by chemical devulcanization. 15 different rubber samples were produced for the experimental measurements. Multilayer constructions with two solid layers of plasterboard on both sides (GKB and GKFI) and porous acoustic material of rubber sample inside were produced. Measurements were made in an impedance tube and compared with the results of TMM analysis. The same trends of resonant frequencies were determined. According to the results, the resonant frequencies depended on the thickness of the material, since transmission loss values depended on the mass of construction. According to the test results of transmission loss, constructions with 50mm thick rubber samples had on average 3dB better results than the structures with 25mm samples and 5dB better results than structures with 12 mm thick rubber samples. In addition, it was found that higher density plasterboards (GKFI) increased the overall transmission loss value of the structure by 5 dB. The same trends were determined by the TMM method. The test results showed that multi-layered constructions with devulcanized waste rubber had high transmission loss result and could be used for sound insulating structures.

Financial time series and other human-driven, non-natural processes are known to exhibit fat-tailed outcome distributions. That is, such processes demonstrate a greater tendency for extreme outcomes than the normal distribution or other natural distributional processes would predict. We examine the mathematical expectation, or simply "expectation," traditionally the probability-weighted outcome, regarded since the seventeenth century as the mathematical definition of "expectation." However, when considering the "expectation" of an individual confronted with a finite sequence of outcomes, particularly existential outcomes (e.g., a trader with a limited time to perform or lose his position in a trading operation), we find this individual "expects" the median terminal outcome over those finite trials, with the classical seventeenth-century definition being the asymptotic limit as trials increase to this. Since such finite-sequence "expectations" often differ in values from the classic one, so do the optimal allocations (e.g., growth-optimal). We examine these for fat-tailed distributions. The focus is on implementation, and the techniques described can be applied to all distributional forms.

Effective water resources management requires assessments of water availability within a framework of complex institutions and infrastructure employed to manage extremely variable stream flow shared by numerous often competing water users and diverse types of use. The Water Rights Analysis Package (WRAP) modeling system is fundamental to water allocation and planning in the state of Texas in the United States. Integration of environmental flow standards into both the modeling system and comprehensive statewide water management is a high priority for continuing research and development. The public domain WRAP software and documentation are generalized for application any place in the world. Lessons learned in developing and implementing the modeling system in Texas are relevant worldwide. The modeling system combines: (1) detailed simulation of water right systems, interstate compacts, international treaties, federal/state/local agreements, and operations of storage and conveyance facilities; (2) simulation of river system hydrology; and (3) statistical frequency and reliability analyses. The continually evolving modeling system has been implemented in Texas by a water management community that includes the state legislature, planning and regulatory agencies, river authorities, water districts, cities, industries, engineering consulting firms, and university researchers. The shared modeling system contributes significantly to integration of water allocation, planning, system operations, and research.

This paper presents computer and color vision research focusing on human color perception in VR environments. A VR art gallery with digital twins of original artworks is created for this experiment. In this research, the field of colorimetry and the application of CMYK and RGB color models are applied. The interrelationships of the two colors models are applied to create a color modification of the VR art gallery environment using C# Script procedures. This color-edited VR environment works with a smooth change of color tone in a given time interval. At the same time, a sudden change in the color of the RGB environment is defined in this interval. This experiment aims to record a user's reaction embedded in a VR environment and the effect of color changes on human perception in a VR environment. The research uses lie detector sensors that record the physiological changes of the user embedded in VR. Five sensors are used to record the signal. An experiment on the influence of the user's color perception in a VR environment using lie detector sensors has never been conducted. This research defines the basic methodology for analyzing and evaluating the recorded signals from the lie detector. The presented text thus provides a basis for further research in the field of colors and human color vision in a VR environment and lays an objective basis for use in many scientific and commercial areas.

As a result of the cancer immunotherapy revolution hundreds of clinical trials of the newly approved immunotherapies are now under way to improve responses. Not unexpectedly, the 2018 Nobel Prize in Physiology or Medicine was awarded to James P. Allison and Tasuku Honjo for their development of cancer therapy by blockade of co-inhibitory signals. While success stories of terminal cancer patients achieving complete remissions are accumulating, not enough research has been done into the risks of the new therapies. Since the use of immunotherapy is becoming more common, and is expected to develop into first- and second-line treatments, immunotoxicity and autoimmunity are emerging as the nemesis of immunotherapy. Immune-related adverse events (IrAEs) could affect any tissue, their incidence may reach up to 90% of patients and toxicity is dose-dependent. While the combination of two immune checkpoint inhibitors (ICIs) increased efficacy, the incidence of severe adverse events was also increased. Apparently, ICIs cannot be restricted to the targeted anti-tumor T cell population. The long lasting objective of cancer regression can only be achieved by paying a price: tolerance to healthy self tissues is compromised. In the face of an ipilimumab induced pan-lymphocytic activation, a therapeutic paradigm shift is required. The task is not desperately trying to put the genie back in the bottle by immune suppressive treatments, but instead harnessing the autoimmune forces by an off label low-dose combined anti-CTLA-4 and anti-PD1 antibody blockade, which is supplemented with conventional interleukin-2 stimulation and hyperthermia. The proof-of-principle of the low-dose-combination therapy was demonstrated in a heavily pre-treated triple negative breast cancer (TNBC) patient with far advanced pulmonary metastases and severe shortness of breath, who had exhausted all conventional treatment. Her pulmonary metastases went into complete remission with transient WHO I-II diarrhea and skin rash. She lived for 27 months after starting the low-dose-combination therapy. She had recurrence as a sternal mass and pleural metastases up to 3 cm. Since the low-dose-combination protocol consists only of approved drugs and treatments, this exceptional response should instigate further research efforts.

Zircon xenocrysts from alkali basalts in Ratanakiri Province, Cambodia, represent a unique low-Hf zircon, within a 12,000 km long Indo-Pacific megacryst zone. Colourless, yellow, brown and red crystals ({100}, {101}, subordinate {211}, {1103}), with hopper growth and corrosion features, range up to 20 cm in size. Zircon chemistry implicates juvenile, Zr-saturated, mantle-derived alkaline melt (Hf 0.6–0.7 wt%, Y <0.2 wt%, U+Th+REE <600 ppm, Zr/Hf 66–92, Eu/Eu*_N ~ 1, positive Ce/Ce*_N, HREE enrichment). Incompatible element depletion with increasing Yb/Sm_N from core to rim at ~ constant Hf suggests single stage growth. Ti-in-zircon temperatures (~570–740 °C) are lower than predicted by crystal morphology (800–900 °C) and decrease from core to rim (D_T = 10–50 °C). The d¹⁸O values (4.88 to 5.01‰ VSMOW) are relatively low for xenocrysts from the zircon Indo-Pacific zone (ZIP). The ¹⁷⁶Hf/¹⁷⁷Hf values (+ εHf 4.5–10.2) give T_{Depleted Mantle} model source ages of 260–462 Ma and T_Crustal ages of 391–754 Ma. The source magmas reflect variably depleted lithospheric mantle with little supracrustal input. Zircon U-Pb (0.88–1.56 Ma) and (U-Th)/He (0.86–1.02 Ma) ages are older than host basalt ages (~0.7 Ma), suggesting limited residence before transport. Zircon genesis suggests Zr-saturated, Al-undersaturated, carbonatitic-influenced, low-degree partial melting (<1%) of peridotitic mantle at ~60 km beneath the Indochina terrane.

Taiwan's bed and breakfast (B&B) development has been more than 25 years ago, from the first generation of retirement to the B&B industry, serving tourists from all over the world accom-modation, providing breakfast and accommodation mode to the present, after the change of employees from the second generation, more and more attention is paid to the cultivation and cultivation of business ability. With the advent of the era of AI technology networking, the ca-pabilities required for B&B operation are more focused on all aspects of service, and the good marketing ability of B&B can promote a green chimney-free tourism economy, which is also a favorite industry of various governments and the public. This study explores the basic vocational competency indicators required for running a B&B, with (1)EQ emotion management skills, (2)Financial management ability, (3)(SK) technical skills, and (4)Marketing and promotion management capabilities. Through the study method, the K-S Z test was determined by the con-sensus conclusion of expert reliability and validity p value

The paper analyses the unused urban spaces in concert with the creative city idea. The research issues are developed as follows. 1. The unused urban places express the city's unsustainability since every urban space has the potential to become such a dead zone. 2. The concept of the creative city covers different creative activities in concert with sustainable development. 3. The unusable urban places result from a modernistic approach that neglects the cultural context, of the city's division into functional zones ignoring integral living intentions and industrial exploitation in the previous city's rims. 4. The Vilnius Sport Palace is an unused space not so much due to the lack of interest, but due to a knot of interests, which politicians cannot cut. The research raises the question of whether the problem of the VSP can be solved by using the idea of the creative city. In terms of the theoretical approach, a comparative analysis is used. Besides literature analyses, the case study is applied. Additionally, the semiotic approach is used. For this purpose, two of Greimas' traditional semiotic squares in combination with Ricoeur's idea of the interpretation's conflict are applied.

Candidiasis is considered an emerging public health concern because of the occurrence of drug-resistant Candida strains and the lack of available structurally diverse antifungal drug armamentariums. The indole alkaloid globospiramine from the anticandidal Philippine medicinal plant Voacanga globosa exhibits a variety of biological activities; however, its antifungal properties remain to be explored. In this study, we report the in vitro antifungal activities of globospiramine against Candida albicans and Candida tropicalis and explore its possible target proteins using in silico methods. The colony-forming unit (CFU) viability assay revealed time- and concentration-dependent anticandidal effects of the alkaloid by decreasing almost 50% of the viable CFUs 60 min after treatment. Results of the MIC and MFC assays indicated inhibitory and fungicidal effects of globospiramine against C. albicans (MIC = 8 µg/mL; MFC = 4 µg/mL) and potential fungistatic effects against C. tropicalis at lower concentrations (MIC = 4 µg/mL; MFC &gt; 64 µg/mL). The FAM-FLICA poly-caspase assay showed metacaspase activation in C. albicans cells at concentrations of 16 and 8 µg/mL, which agreed with the MIC and MFC values. Molecular docking and molecular dynamics simulation experiments indicated stable, strong binding of globospiramine with the target proteins 1,3-β-glucan synthase and Als3 adhesin enzymes, which are indirectly involved in apoptotic-driven candidal inhibition.

Multichannel EEGs were obtained from healthy participants in the eyes-closed no-task condition (where the alpha component is typically abolished). EEG dynamics in the two conditions were quantified with two related binary Lempel-Ziv measures of the first principal component and with three measures of integrated information including the more recently proposed integrated synergy. Both integrated information and integrated synergy with model order p=1 had greater values in the eyes closed condition. If the model order of integrated synergy was determined with the Bayesian Information Criterion, this pattern was reversed, and in common with other measures, integrated synergy was greater in the eyes open condition. Eyes open versus eyes closed separation was quantified by calculation of the between-condition effect size. Lempel-Ziv complexity of the first principal component showed greater separation than the measures of integrated information. The performance of the integrated information measures investigated here when distinguishing between indisputably different physiological states encourages caution when advocating for their use as measures of consciousness.

This works is related to the modeling of cellulose pyrolysis with a pseudo equilibrium approach. The objective is to model the kinetics of the cellulose pyrolysis with a semi-global mechanism obtained from the literature, in order to obtain the yield and the rate of formation of char. The pseudo equilibrium sense consists in the supposition that the solid phase devolatilization can be described kinetically - at finite rate - , preserving the competitive characteristic between the production of char and tar, while the gas phase can be described by means of chemical equilibrium. A set of ordinary, linear and non linear, differential equations was obtained and solved numerically with a simple but consistent scheme using the Totally Implicit Euler method. Chemical equilibrium was solved using CANTERA coupled with a code written in Matlab. Results showed that the scheme preserve the tar-gas competitive characteristic for cellulose pyrolysis. The gas phase, is defined as a mixture of CO₂, CO, H₂O, CH₄, H₂ and N₂ showed similarly composition compared with models from literature. Finally, the extension of the model to biomass in general, is straightforward, in order to include the hemicellulose and lignin.

Wood and plants are made of fibers which contain, in addition to cellulose, lignin and hemicelluloses. Xylan and galactoglucomannan are the dominant secondary cell wall hemicelluloses. Besides fibers’ traditional use in textile and paper industries, the fibers are important materials for the biorefinery industry and for developing biocomposites. In the former context, renewable lignocellulosic biomass is used as feedstock to sustainably produce fuels, chemicals, and polymers. On the other hand, in relation to composites, cellulose fibers which are anisotropic play an important reinforcing role in fiber-matrix interactions. However, for these and other applications, structural analysis of the fibers is important and among many analytical techniques used, Raman spectroscopy is one of the methods. However, given the structural similarity between hemicelluloses and cellulose, many of their Raman contributions overlap. While the wavenumber positions corresponding to the Raman contributions of cellulose, hemicelluloses, and lignin are known, extent to which overlapping features of hemicellulose modify the spectrum of cellulose is not yet fully understood. The present investigation focuses on this aspect by using xylan as one of the hemicelluloses. As a model system, samples with various mass ratios of microcrystalline cellulose (cotton) and xylan (birch wood) were prepared and analyzed by FT-Raman spectroscopy. The findings were then applied to interpret Raman spectra of selected xylan containing delignified plant fibers. It is hoped that insights gained would lead to better interpretation of the spectra of natural and treated plant materials.

Rarely has a chemical elicited as much controversy as has dichloroacetate (DCA). DCA was initially considered a dangerous toxic industrial waste product. Then it was a potential treatment for lactic acidosis. However, the main controversies started in 2008 when DCA was found to have anti-cancer effects in experimental animals. These publications showed contradictory results in vivo and in vitro, so that a thorough consideration of this compound in cancer is merited. Despite 50 years of experimentation, DCA’s future in therapeutics is uncertain. Without adequate clinical trials and lack of health authorities’ approval, DCA has been introduced in off -label cancer treatments in alternative medicine clinics in Canada, Germany, and other European countries. The lack of well-planned clinical trials and its use by people without medical training has discouraged consideration by the scientific community. There are limited thorough clinical studies of DCA, and many publications are individual case reports. Case reports of DCA benefits against cancer have been increasing recently. Furthermore, it has been shown that DCA synergizes with conventional treatments and other repurposable drugs. Beyond the classic DCA target, pyruvate dehydrogenase kinase, new target molecules have also been recently discovered. These findings have renewed interest in DCA. This paper explores whether existing evidence justifies further research on DCA for cancer treatment and it explores the role DCA may play in oncology treatment.

Cryptococcus neoformans threaten the health, causing cryptococcal meningitis and pneumonia, especially in immunosuppressed patients, which can be fatal. Recently, our research group evaluated and studied the mechanisms of action of four synthetic peptides (SP) against C. neoformans. Here, in silico and in vitro analyses help deepen understanding of peptides' mechanisms of action. The interaction of the peptides with a membrane receptor was analyzed by docking analysis, in addition to ROS overproduction and the modulation of redox metabolism, inhibition of ergosterol biosynthesis, and release of cytochrome c. Out of four, three peptides interacted with membrane receptor PHO36 altering its structure and function and leading to a higher accumulation of O₂- and H2O2. C. neoformans cells treated with SP presented a reduction in the activity of antioxidant enzymes, corroborating ROS accumulation. However, in the presence of the antioxidant ascorbic acid, some peptides could not induce this oxidative stress and have the activity against C. neoformans affected. Curiously, two of these SPs still maintained the activity against C. neoformans and even induced the membrane pore formation as revealed by propidium iodide uptake assay, revealing their mechanism of action is ROS-independent. Additionally, SPs inhibited the biosynthesis of ergosterol, which corroborates the pore formation on the membrane of C. neoformans cells, inhibited the lactate dehydrogenase activity affecting the cell metabolism, and induced the release of Cyt c from the mitochondria inducing death by apoptosis in the cryptococcal cells. Our findings strongly suggest that SPs act by multiple mechanisms, making it difficult for C. neoformans to acquire resistance highlighting the potential of SPs as alternative molecules in treating infections caused by C. neoformans.

Fluorescent bioprobes are invaluable tools for visualizing live cells and deciphering complex biological processes by targeting intracellular biomarkers without disrupting cellular functions. In addition to protein-binding concepts, fluorescent probes utilize various mechanisms, including membrane, metabolism, and gating-oriented strategies. This study introduces a novel fluorescent mechanism distinct from existing ways. Here, we developed a B-cell selective probe, CDrB, with unique transport mechanisms. Through SLC-CRISPRa screening, we identified two transporters, SLCO1B3 and SLC25A41, by sorting out populations exhibiting higher and lower fluorescence intensities, respectively, demonstrating contrasting activities. We confirmed that SLCO1B3, with comparable expression levels in T and B cells, facilitates the transport of CDrB into cells, while SLC25A41, overexpressed in T lymphocytes, actively exports CDrB. The observation suggests that SLC25A41 plays a crucial role in discriminating between T and B lymphocytes. Furthermore, it reveals the potential for reversible localization of SLC25A41 to demonstrate its distinct activity. This study is the first report to unveil a novel strategy of SLC by exporting the probe. We anticipate that this research will open up new avenues for developing fluorescent probes.

Background: Antibiotic resistance is an urgent issue everywhere in the globe. It is necessary to look into new sources of antibiotics to address this issue. Aim of the study: studying the purification of Corallopyronin B from various soil conditions in Egypt, as well as the antibacterial effectiveness of Corallopyronin B in preclinical animal testing and randomized human clinical trials phases 1/2. Type of the study: Screening experimental study. Methodology: Several soil conditions in Egypt were examined to create bacterial isolates that generated the antibiotic chemical Corallopyronin B. Using reversed-phase HPLC, Myxopyronin B was purified. The test antibiotic's minimum inhibitory concentration( MIC) and in vitro antibacterial activity were ascertained using the paper disc diffusion assay and the broth microdilution technique. Furthermore, in stages 1/2 of randomized clinical trials including human and animal models, pharmacokinetics, adverse drug reactions, and the in vivo antibacterial spectrum were discovered. Results: The soil bacterial isolate Corallococcus coralloides DSM 2259, grown on a Casein yeast peptone( CYP) plate, produced Corallopyronin B from its culture supernatant. At MICs more than 100 mcg/ml, the test antibiotic inhibited the growth of many Gram -ve bacteria, including Escherichia coli, while preventing the growth of numerous Gram +ve bacteria, with MICs ranging from 1 to 10 mcg/ml. Eukaryotic cells, on the other hand, including those in humans and fungi, were unharmed. The test antibiotic was shown to have a bactericidal effect by inhibiting bacterial DNA-dependent RNA polymerase( RNLP). In phases 1/2 of randomized human clinical trials, when 600 mg of the dose per 70 kg of body weight was administered SC, the Cmax was 8.6 mcg/ml at Tmax 1 hour; T1/2 reached 136 min following first-order kinetics of elimination. It stopped acting around 6-7 hours after SC was administered. In the preclinical and randomized human clinical trial phases 1/2, less than 6 percent of experimental candidates had uncommon toxicity, showing reduced bile flow. Protein binding with plasma albumin was detected which reached about 83%. Conclusion: The current work was noteworthy since it involved the production of the bactericidal antibiotic Corallopyronin B from Corallococcus coralloides DSM 2259 which was isolated from several soil environments in Egypt.

The convergence of digital twin technology with additive manufacturing (AM) represents a transformative advancement in the fields of design, simulation, and production. Digital twins—virtual replicas of physical assets—enable real-time monitoring, simulation, and optimization of manufacturing processes by mirroring their physical counterparts. When integrated with additive manufacturing, which allows for the creation of complex geometries and rapid prototyping, digital twins enhance the ability to design, test, and refine products with unprecedented precision and efficiency. This integration facilitates iterative design improvements, predictive maintenance, and real-time process adjustments, leading to more accurate simulations and optimized production workflows. By leveraging data from digital twins, manufacturers can anticipate issues, reduce material waste, and shorten development cycles. This abstract explores how the fusion of digital twin technology with AM not only refines traditional manufacturing paradigms but also paves the way for more innovative and adaptive manufacturing practices.

The Nanosecond Pulsed Electric Field (nsPEF) or Nano Pulsed Stimulation (NPS) is a cutting-edge technology that applies a series of high-voltage electric field pulses of extremely short duration, typically on the order of nanoseconds, to cells. This technique induces the formation of nanopores and activate ionic channels, thereby altering cellular activity. Recent simulations suggest that nsPEF also triggers a novel phenomenon, Protein-mediated Electroporation, whereby pores are formed through the voltage-sensing domain of ionic channels. In this study, we employed Molecular Dynamics simulations and machine learning techniques to investigate the Voltage Sensing Domain (VSD) of a cardiac channel under nsPEF stimulation. Specifically, we characterized VSD structures that form pores helping for the understanding of the physical chemistry underlying the defibrillation effect of nsPEF. Our analysis involved the clustering of 142 replicas simulated for 50 ns under the nsPEF stimulus. Subsequently, we identified the representative structures of each cluster and calculated the free energy between them. Our results demonstrate that although VSD structures are ubiquitous among ionic channels, they exhibit distinct responses to nsPEF stimuli. These findings have significant implications for the development of novel nsPEF-based therapies for cardiac diseases.

The present work analyzes the behavior in terms of corrosion resistance of three reinforced concrete formulations over a period of 1 year. The samples were accompanied by creating a monitoring methodology using the Electrochemical Impedance Spectroscopy (EIE) technique, working only with the real component over time. Three mixtures were used, one conventional without pozzolanic addition (REF) and two others with pozzolanic additions, rice husk ash (RCA) and metakaolin (MK). Prototypes were created and exposed to the action of a 165g/l NaCl sodium chloride solution. The characterization of the materials was carried out by determining the chloride diffusion profile (ASTM 1556), analyzing images using tomography and with the support of analytical techniques such as x-ray fluorescence and x-ray diffraction. The monitoring methodology using the EIE demonstrated the positive effect of the insertion of pozzolans, rice husk ash (RCA) and metakaolin (MK), by delaying the process of chloride diffusion in the concrete, resulting in greater resistance to corrosion. The EIE also showed that the active mineral addition in concrete, of aluminum-silicic composition (MK), had a predominant protective effect on the steel//concrete interface against the attack of chloride ions.

Atopic dermatitis (AD) is a chronic inflammatory condition which significantly affects quality of life in both patients and their caregivers. Calcineurin inhibitors (CNI) are a class of immunosuppressive drugs predominantly inhibiting T cell mediated immune processes. CNI form complex by binding with immunophilins and in turn inhibit calcineurin and suppress downstream inflammatory pathway. Tacrolimus and pimecrolimus are topical CNI approved for the treatment of mild to severe AD in both children and adults. Application site reactions are frequently seen. They have been issued with black box warning towards increased risk of malignancies but supportive evidence is lacking. Cyclosporine, though highly effective, is used off-label for AD management. It is used for controlling acute flares of AD due to its very rapid onset of action. Nephrotoxicity and hypertension are its serious complications. CNI have not been reported with teratogenicity and may be used conditionally during pregnancy and lactation.

4D printing represents an innovative evolution of 3D printing technologies, incorporating time as a fourth dimension to create objects that can transform and adapt over time in response to environmental stimuli. This emerging field has shown significant advancements in materials science, design principles, and applications. Recent research focuses on developing responsive materials such as shape-memory polymers, hydrogels, and composites that can undergo controlled transformations in reaction to changes in temperature, humidity, or other external factors. The advancements in 4D printing have led to a wide array of applications, including self-healing structures, adaptive medical devices, and dynamic architectural components. This abstract examines the latest progress in 4D printing technologies, highlighting key advancements in material development and design strategies. It explores various case studies that demonstrate the practical implementation of 4D-printed objects across different sectors. Furthermore, the abstract discusses the challenges faced by researchers, including material limitations, scalability issues, and the need for standardized testing methods. The potential future directions of 4D printing are also considered, emphasizing the need for interdisciplinary collaboration to overcome current limitations and expand the range of applications. This research underscores the transformative potential of 4D printing in creating intelligent and adaptable systems, offering significant benefits across industries from healthcare to construction.

Purpose: To evaluate nursing leaders' perception towards communication and relationship management competencies while using digital platforms during the COVID-19 pandemic. Background: Communication and relationship management competencies among nursing leaders will ensure healthcare models are successfully implemented. Nursing leaders can achieve effective leadership by mastering these competencies leading to an overall improvement in the quality of nursing care. However, digital platforms have been rapidly evolving in the healthcare ecosystem and have been significant during the battle with COVID-19. It is crucial to ensure that nursing leaders can use digital platforms to communicate and practice efficient management in their op-erations, especially during a crisis when their services are vital. Design: Descriptive, comparative study. Methods: The study was conducted between February to March 2021. A 5-item Linkert-type questionnaire was adopted from the American Organization for Nursing Executives (2005) and was sent to identified nursing leaders in Hamad Medical Corporation through the official email. Results: Two hundred fifty nurse leaders were invited to participate, but only 116 responded positively, translating to a response rate of 46.4%. The male participants represented a larger proportion of 64.10%, while the female was 35.90%. Regarding the questionnaire, the Cronbach alpha was α ˃ 0.987, indicating that all items revealed a sufficient level of internal consistency. The respondents had a minimum of 0 and a maximum of 52.6n in the communication and relationship management items. Influencing behavior, relationship management, and effective communica-tion had the lowest scores, which indicate low competency. The F value in ANOVA analysis was close to 1.0, implying that the null hypothesis is true. The significance value is <0.5 implying that there is a difference in response on effective communication proficiency of nurse leaders. Conclusions: Digital platforms are communication tools that are widely adopted to engage and reach nurses on numerous topics. Nurse leaders should capitalize on their benefits and generate critical discussions. The continued need to research nursing leadership competencies is critical as healthcare continues to change and evolve. Educational institutions and healthcare organizations must understand that nursing leaders should strive for professional development and knowledge acquisition to improve their communication and management.

Here we investigate how the local properties of particles in a thermal bath may influence the thermodynamics of the bath, and consequently alter the statistical mechanics of subsystems that comprise the bath. We are guided by the theory of small-system thermodynamics, which is based on two primary postulates: that small systems can be treated self-consistently by coupling them to an ensemble of similarly small systems, and that a large ensemble of small systems forms its own thermodynamic bath. We adapt this “nanothermodynamics” to investigate how a large system may subdivide into an ensemble of smaller subsystems, causing internal heterogeneity across multiple size scales. For the semi-classical ideal gas, maximum entropy favors subdividing a large system of “atoms” into an ensemble of “regions” of variable size. The mechanism of region formation could come from quantum exchange symmetry that makes atoms in each region indistinguishable, while decoherence between regions allows atoms in separate regions to be distinguishable by their distinct locations. Combining regions reduces the total entropy, as expected when distinguishable particles become indistinguishable, and as required by a theorem in quantum mechanics for sub-additive entropy. Combining large volumes of small regions gives the usual entropy of mixing for a semi-classical ideal gas, resolving Gibbs paradox without invoking quantum symmetry for atoms that may be meters apart. Other models presented here are based on Ising-like spins, which are solved analytically in one dimension. Focusing on the bonds between the Ising-like spins we find similarity in the equilibrium properties of a two-state model in the nanocanonical ensemble and a three-state model in the canonical ensemble. Thus, emergent phenomena may alter the thermal behavior of microscopic models, and the correct ensemble is necessary for fully-accurate predictions. Another result using Ising-like spins involves simulations that include a nonlinear correction to Boltzmann’s factor, which mimics the statistics of indistinguishable states by imitating the dynamics of spin exchange on intermediate lengths. These simulations exhibit 1/f-like noise at low frequencies (f), and white noise at higher f, similar to equilibrium thermal fluctuations found in many materials.

Metal additive manufacturing (AM), commonly referred to as 3D printing with metals, is an innovative technology with significant potential to transform industries such as aerospace, automotive, and healthcare. Despite its promise, the field faces several challenges that impact both its technical feasibility and economic viability. This paper explores the primary technical challenges, including material properties and processing complexities, such as the need for precise control of thermal gradients and the mitigation of defects like porosity and residual stresses. Additionally, it addresses the economic barriers, including high initial equipment costs, the need for specialized knowledge, and the relatively slow build speeds compared to traditional manufacturing methods. By examining these challenges, this paper aims to provide a comprehensive overview of the current state of metal additive manufacturing and suggest potential pathways for overcoming these obstacles to facilitate wider adoption and technological advancement in the field.

Background: Antibiotic resistance is an urgent issue everywhere in the globe. It is necessary to look into new sources of antibiotics to address this issue. Aim of the study: studying the purification of Corallopyronin B from various soil conditions in Egypt, as well as the antibacterial effectiveness of Corallopyronin B in preclinical animal testing and randomized human clinical trials phases 1/2. Type of the study: Screening experimental study. Methodology: Several soil conditions in Egypt were examined to create bacterial isolates that generated the antibiotic chemical Corallopyronin B. Using reversed-phase HPLC, Myxopyronin B was purified. The test antibiotic's minimum inhibitory concentration( MIC) and in vitro antibacterial activity were ascertained using the paper disc diffusion assay and the broth microdilution technique. Furthermore, in stages 1/2 of randomized clinical trials including human and animal models, pharmacokinetics, adverse drug reactions, and the in vivo antibacterial spectrum were discovered. Results: The soil bacterial isolate Corallococcus coralloides DSM 2259, which was grown on a Casein yeast peptone( CYP) plate, produced Corallopyronin B from its culture supernatant. At MICs more than 100 mcg/ml, the test antibiotic inhibited the growth of many Gram -ve bacteria, including Escherichia coli, while also preventing the growth of numerous Gram +ve bacteria, with MICs ranging from 1 to 10 mcg/ml. Eukaryotic cells, on the other hand, including those in humans and fungi, were unharmed. The test antibiotic was shown to have a bactericidal effect by inhibiting bacterial DNA-dependent RNA polymerase( RNLP). In phases 1/2 of randomized human clinical trials, when 600 mg of the dose per 70 kg of body weight was administered SC, the Cmax was 8.6 mcg/ml at Tmax 1 hour; T1/2 reached 136 min following first-order kinetics of elimination. It stopped acting around 6-7 hours after SC was administered. In the preclinical and randomized human clinical trial phases 1/2, less than 6 percent of experimental candidates had uncommon toxicity, which showed up as reduced bile flow. Protein binding with plasma albumin was detected which reached about 83%. Conclusion: The current work was noteworthy since it involved the production of the bactericidal antibiotic Corallopyronin B from Corallococcus coralloides DSM 2259 which was isolated from several soil environments in Egypt.

To achieve n-type doping in diamond, extensive investigations employing first principles have been conducted on various models of phosphorus doping and boron-phosphorus co-doping. The primary focus of this study is to comprehensively analyze the formation energy, band structure, density of states, and ionization energy of these structures. It is observed that within a diamond structure solely composed of phosphorus atoms, the formation energy of an individual carbon atom is excessively high. However, the substitution of two carbon atoms leads to the conversion of diamond into a p-type semiconductor. Upon examining the P-B co-doping structure, it is revealed that the doped impurities exhibit a tendency to form more stable cluster configurations. As the separation between the freely doped atoms and the cluster impurity structure increases, the overall stability of the structure diminishes, consequently resulting in an elevation of the ionization energy. Analysis of the electronic density of states demonstrates that the electron orbit of the B atom makes negligible contributions to the impurity levels during P-B doping.

Passive microwave measurements have been available on satellites dating back to the 1970s on research satellites flown by the National Aeronautics and Space Administration (NASA). Since then, several other sensors have been flown to retrieve hydrological products for both operational weather applications (e.g., the Special Sensor Microwave/Imager–SSM/I; the Advanced Microwave Sounding Unit–AMSU) and climate applications (e.g., the Advanced Microwave Scanning Radiometer–AMSR; the Tropical Rainfall Measurement Mission Microwave Imager–TMI; the Global Precipitation Mission Microwave Imager–GMI). Here the focus is on measurements from the AMSU-A, AMSU-B and Microwave Humidity Sounder (MHS). These sensors have been in operation since 1998 with the launch of NOAA-15, and are also on board NOAA-16, -17, -18, -19 and the MetOp-A and -B satellites. A data set called the “Hydrological Bundle” is a Climate Data Record (CDR) that utilizes brightness temperatures from Fundamental CDRs to generate Thematic CDRs (TCDR). The TCDR’s include: Total Precipitable Water (TPW), Cloud Liquid Water (CLW), Sea-Ice concentration (SIC), Land surface temperature (LST), Land surface emissivity (LSE) for 23, 31, 50 GHz, rain rate (RR), snow cover (SC), ice water path (IWP), and snow water equivalent (SWE). The TCDR’s are shown to be in general good agreement with similar products from other sources such as the Global Precipitation Climatology Project (GPCP) and the Modern-Era Retrospective Analysis for Research and Applications (MERRA-2). Because of the careful intercalibration of the FCDR’s, little bias is found among the different TCDR’s produced from individual NOAA and MetOp satellites, except for normal diurnal cycle differences.

Recently, the properties of bouncing oil droplets, also known as `walkers', have attracted much attention because they are thought to offer a gateway to a better understanding of quantum behaviour. They indeed constitute a macroscopic realization of wave-particle duality, in the sense that their trajectories are guided by a self-generated surrounding wave. The aim of this paper is to try to describe walker phenomenology in terms of de Broglie-Bohm dynamics and of a stochastic version thereof. In particular, we first study how a stochastic modification of the de Broglie pilot-wave theory, à la Nelson, affects the process of relaxation to quantum equilibrium, and we prove an H-theorem for the relaxation to quantum equilibrium under Nelson-type dynamics. We then compare the onset of equilibrium in the stochastic and the de Broglie-Bohm approaches and we propose some simple experiments by which one can test the applicability of our theory to the context of bouncing oil droplets. Finally, we compare our theory to actual observations of walker behavior in a 2D harmonic potential well.

Systemic lupus erythematosus (SLE) is a heterogenous autoimmune disease. While its etiology remains elusive, current understanding suggests a multifactorial process with contributions by genetic, immunologic, hormonal, and environmental factors. A hypothesis that combines several of these factors proposes that genomic elements, the L1 retrotransposons, are instrumental in SLE pathogenesis. L1 retroelements are transcriptionally activated in SLE and produce two proteins, ORF1p and ORF2p, which are immunogenic and can drive type I interferon (IFN) production by producing DNA species that activate cytosolic DNA sensors. In addition, these two proteins reside in RNA-rich macromolecular assemblies that also contain well-known SLE autoantigens like Ro60. We surmise that cells expressing L1 will exhibit all the hallmarks of cells infected by a virus, resulting in a cellular and humoral immune response similar to those in chronic viral infections. However, unlike exogenous viruses, L1 retroelements cannot be eliminated from the host genome. Hence, dysregulated L1 will cause a chronic, but perhaps episodic, challenge for the immune system. The clinical and immunological features of SLE can be largely explained by this model. Here we review the support for, and the gaps in, this hypothesis of SLE and its potential for new diagnostic, prognostic, and therapeutic options in SLE.

This work is related to the environmental toxicology risk assessment and evaluation of possible transformation of carbon-based nanomaterials (CNMs) after the contact with marine microalgae. The materials used in the study represent common and widely applied multiwalled carbon nanotubes (CNTs), fullerene (C60), graphene (Gr), and graphene oxide (GrO). The toxicity was evaluated as growth rate inhibition, esterase activity, membrane potential, and reactive oxygen species generation changes. The measurement was performed with flow cytometry after 3, 24, 96 h, and 7 days. Biotransformation of nanomaterials were evaluated after 7 days of microalgae cultivation with CNMs by FTIR and Raman spectroscopy. The calculated toxic level (EC50 in mg/L, 96 h) of ued CNMs reduced in the following order: CNTs (18.98) &gt; GrO (76.77) &gt; Gr (159.40) &gt; C60 (414.0). Oxidative stress and membrane depolarization was the main toxic action of CNTs and GrO. At the same time, Gr and C60 decreased the toxic action with time and had no negative impact on microalgae even at concentration of 125 mg/L. Moreover, C60 and Gr after seven days of the contact with microalgae cells obtained structural deformations.

This paper reviews the ethical issues involved and argues that each of the usual policies for handling conscientious refusals faces serious challenges. Healthcare providers who refuse to provide medical services should be expected to explain their reasons, make prompt referrals, and bear some of the resulting costs or burdens.

Stagnation is the transient state of a solar thermal system under high solar irradiation where the useful solar gain is zero. Both flat-plate collectors with selective absorber coatings and vacuum-tube collectors exhibit stagnation temperatures far above the saturation temperature of the glycol-based heat carriers within the range of typical system pressures. Therefore, stagnation is always associated with vaporization and propagation of vapor into the pipes of the solar circuit. It is therefore essential to design the system in such a way that vapor never reaches components that cannot withstand high temperatures. In this article, a thermal-hydraulic model based on the integral form of a two-phase mixture model and a drift-flux correlation is presented. The model is applicable to solar thermal flat-plate collectors with meander-shaped absorber tubes and selective absorber coatings. Experimental data from stagnation experiments on two systems, which are identical except for the optical properties of the absorber coating, allowed comparison with simulations carried out under the same boundary conditions. The absorber of one system features a conventional highly selective coating, while the absorber of the other system features a thermochromic coating, which exhibits a significantly lower stagnation temperature. Comparison of simulation results and experimental data show good conformity. This model is implemented into an open-source software tool called “THD” for the thermal-hydraulic dimensioning of solar systems. The latest version of THD, updated by the results of this article, enables planners to achieve cost-optimal design of solar thermal systems and to ensure failsafe operation by predicting the steam range under the initial and boundary conditions of worst-case scenarios.

Blockchain is a data management innovation that allows the linkage of successive records regarding a digital entity, and to store them into a shared, decentralized, distributed and retroactively unchangeable data structure. Each bit of information related to the recorded events contains the public key of the owner, therefore, the whole record is formed by a chain of transactions with blocks of information identifying where the transaction was generated from and its current destination (Nakamoto, 2008). Blockchain is the technology behind Bitcoin, an online currency that was first introduced in 2009. The technology makes it possible to conduct business between members within the network without relying on third parties as guarantors to prove transaction integrity, thus increasing speed and reducing cost of transaction. Moreover, the transparency posed by the technology makes it possible to trace goods and services through all stages, making the technology a unique tool that can be assimilated by, for example, the Agro-food supply chain systems. Specifically, Blockchain is being tested in a pilot project in the UK meat (Beef) industry by the FSA (Food Standards Agency) and the slaughterhouses, with IBM Blockchain platform to ensure full transparency and compliance with regulations, (Evenstad, 2018). However, the uptake of Blockchain in the fresh produce (fresh and fresh, short-life processed fruit, vegetables, salads) supply chain is lagging, in the United Kingdom, and remains untested and limited to literature, models and specific case studies in the United States of America and France. The study aims at understanding how prepared stakeholders are in adopting Blockchain for their operations. An inductive qualitative method was employed through non-structured interviews with three companies and one consumer focus group. The interviews were guided by seven (7) open-ended questions, which were unstructured. The collected data was analyzed with axial coding through constant comparative methods. Seven (7) themes were identified as factors influencing the adoption of Blockchain in the fresh produce supply chain in the UK. These are, novelty of the technology, complexity of the fresh produce supply chain in UK, level of product transformation, technological compatibility with operations, cost and value, Customer (retailer) push for adoption, and public/consumers opinion. The adaptation of Blockchain by the current fresh produce supply chain in the UK and the EU at large will come about when concerns on Novelty, and complexity of supply chain systems are fully addressed.

The growing production and application of carbon-based nanomaterials (CNMs) represent possible risks for aquatic systems. However, the variety of CNMs with different physical and chemical properties, and different morphology complicated the understanding of their potential toxicity. This paper aims to evaluate and compare the toxic impact of four most common CNMs, namely multiwalled carbon nanotubes (CNTs), fullerene (C60), graphene (Gr), and graphene oxide (GrO) in marine microalgae Porphyridium purpureum. The microalgae cells were exposed to the CNMs for 96 h and measured by flow cytometry. Based on the obtained results, we determined no observed effect level (NOEL), calculated EC10 and EC50 concentrations for growth rate inhibition, esterase activity, membrane potential, and reactive oxygen species (ROS) generation changes for each tested CNMs. According to the sensitivity (growth rate inhibition) of P. purpureum, the used CNMs can be listed in following order: CNTs &gt; GrO &gt; Gr &gt; C60. The toxicity of CNTs was significantly higher than the toxic effect of the other used CNMs and only this sample caused increase of ROS generation in microalgae cells. This effect caused by trace metal residuals in CNTs and high affinity between particles and microalgae associated with the presence of exopolysaccharide coverage on P. purpureum cells.

During the last few years, the world witnessed one of the worst calamities to humankind- the COVID-19 pandemic. We also witnessed the development of vaccines at an unprecedented pace against the SARS-CoV-2- the causative agent. India was among the hard-hit countries by COVID-19, developed its indigenous vaccine and implemented vaccines developed in other countries as well. Initially, the antibody level and the neutralizing antibody titer against the pathogen were considered as the correlates of immune protection from the disease. However, the long-term protection from the pathogen was provided by the immune memory cells viz. T and B memory cells and their ability to efficiently make recall responses. In this regard, globally the research studies focused mainly on the mRNA-based vaccines. The studies on immune memory response, particularly- the B cell memory response bestowed by the vaccines given to Indians is relatively obscure. We studied the level of RBD specific memory B cells in the peripheral circulation of the study participants and the ability of B cells to secrete antigen-specific antibodies among Indians vaccinated with Covaxin (BBV152), Covishield (AZD1222), Corbevax (BECOV2D) and Sputnik Light (Gam-COVID-Vac) as well as unvaccinated individuals. Our study revealed that Corbevax and Sputnik Light conferred better antibody-secreting cell (ASC) responses.

Lung cancer is the leading cause of cancer related mortality worldwide. In order to improve its overall survival, early diagnosis is required. Since current screening methods still face some pitfalls, such as high false positive rates for low-dose computed tomography, researchers are still looking for early biomarkers to complement existing screening techniques in order to provide a safe, faster and more accurate diagnosis. Biomarkers are biological molecules found in body fluids, such as plasma, that can be used to diagnose a condition or disease. Metabolomics has already shown to be a powerful tool in the search for cancer biomarkers since cancer cells are characterised by impaired metabolism, resulting in an adapted plasma metabolite profile. The metabolite profile can be determined using nuclear magnetic resonance, or NMR. Although metabolomics and NMR metabolite profiling of blood plasma are still under investigation, there is already evidence for its potential for early-stage lung cancer diagnosis, therapy response, and follow-up monitoring. This review highlights some key breakthroughs in this research field, where the most significant biomarkers will be discussed in relation with their metabolic pathways and in light of the altered cancer metabolism.

This study reports rapid hydrolysis, acylation, and lipolysis with lipase B from Candida antarctica (CalB) and nanofructosome encapsulated CalB (CalB@NF) enzymes immobilized on silica-coated magnetic nanoparticles (Si-MNPs). Enzymatic hydrolysis was confirmed for conversion to p-nitrophenol (p-NP, λex=400 nm) from p-nitrophenyl butyrate (p-NPB, λex=270 nm), and various catalytic parameters such as Km, Vmax, and Kcat were calculated from Michaelis-Menten and Lineweaver-Burk plot. Efficiency of enzymatic hydrolysis was in the order of CalB > Si-MNPs@CalB > CalB@NF > Si-MNPs@CalB@NF, and reusability was much better with the enzyme immobilized on Si-MNPs than with the native enzyme. Enzymatic acylation was confirmed by the formation of benzyl benzoate (λex=229 nm) from benzoic anhydride (λex=240 nm), and efficiency exceeded 99% in all samples. Finally, enzymatic lipolysis was confirmed by the decomposition of olive oil to fatty acid such as oleic acid (λex=230 nm) using thin-layer chromatography (TLC), column chromatography, and proton nuclear magnetic resonance (1H -NMR). The lipases immobilized on Si-MNPs have the advantage of good thermal stability and reusability and are thus applicable to a wide range of industries.

β-Ga2O3 is a well-known semiconductor material for power devices and other applications. Recently, β-Ga2O3 has also been reported as a scintillator material with a light yield of approximately 8400 ph./MeV, scintillation decay time of &lt;1 μs, and density of 6.44 g/cm3. In this study, 2-inch diameter β-Ga2O3 single crystals were prepared by oxide crystal growth using the cold crucible (OCCC) method under various oxygen partial pressures. In the OCCC method, as in the cold crucible method, a high frequency is applied directly to the oxide materials, which are heated and melted, and the melt is held by the outermost solid material itself that is cooled by water using a copper hearth. In the OCCC method, crystal growth is performed while rotating the seed crystal, as in the Czochralski method, to increase the crystal diameter. The optical properties and radiation responses of the crystals grown under various oxygen partial pressures were evaluated.

Developmental hazard evaluation is an important part of assessing chemical risks during pregnancy. Toxicological outcomes from prenatal testing in pregnant animals result from complex chemical-biological interactions, and while New Approach Methods (NAMs) based on in vitro bioactivity profiles of human cells offer promising alternatives to animal testing, most of these assays lack cellular positional information, physical constraints, and regional organization of the intact embryo. Here, we engineered a fully computable model of the embryonic disc in the compucell3d.org modeling environment to simulate epithelial-mesenchymal transition of epiblast cells and self-organization of mesodermal domains (chordamesoderm, paraxial, lateral plate, posterior/extraembryonic). Cell fate in the model is determined by an autonomous homeobox (HOX) clock driven by morphogenetic signals (e.g., FGF, WNT, ATRA, CDX). Executing the model renders a quantitative cell-level computation of mesodermal subpopulations and consequences of perturbation based on known embryogeny. For example, synthetic perturbation of the control network rendered altered phenotypes (cybermorphs) mirroring experimental mouse embryology, with 50% reductions in FGF4, FGF8 and BMP4 signaling resulting in 86%, 98% and 59% reductions, respectively in the posterior mesodermal population, while ATRA exposure also resulted in a 78% decrease in this population. This model enables integration of in vitro chemical bioactivity data for specific molecular targets with known embryology to test mechanistic veracity and quantitative prediction of altered development.

Background/Objectives: Vitamin D’s effect on risk health outcomes is often evaluated using prospective cohort studies. Risk ratios (RRs; e.g., hazard ratios or odds ratios) are determined for incidence for participants with baseline serum 25-hydroxyvitamin D [25(OH)D] concentrations below or above specified values. Serum 25(OH)D concentrations vary over time, thereby diluting the effect of 25(OH)D for long follow-up periods. Inverse relationships between RR and follow-up period have been reported for all-cause mortality rate and cancer incidence rates. Here I evaluate the effect for neurological outcomes. Methods: I analyzed how follow-up period affected results from 10 cohort studies of all-cause dementia, 6 studies of Alzheimer’s disease, and 9 for cognitive impairment with respect to vitamin D deficiency. Results: For all-cause dementia, Alzheimer’s disease, and cognitive impairment, respectively, the linear regression fits are RR = 2.9 – 0.14 × years, r = 0.73, p = 0.02; RR = 2.9 – 0.14 × years, r = 0.69, p = 0.13; and RR = 1.8 – 0.066 × years, r = 0.72, p = 0.03. The regression fit to RR for the shortest follow-up period for each outcome is considered the best estimate of vitamin D deficiency’s effect on risk. Those values are approximately twice that found by averaging all RRs without considering the effect of follow-up period. Conclusions: Vitamin D’s effect on risk of neurological conditions should be determined with relatively short follow-up periods after repeated 25(OH)D measurements as warranted during follow-up.

Abstract: This article reports the results of an ecological study of cancer incidence rates by state in the US for the period 2016-2020. The goals of this study were to determine the extent to which solar UVB doses still reduced cancer risk compared to findings reported in 2006 for cancer mortality rates for the periods 1950–1969 and 1970-1794 as well as cancer incidence rates for the period 1998–2002 and to determine which factors were recently associated with cancer risk. The cancer data for non-Hispanic white (European American) men and women were obtained from the Centers for Disease Control and Prevention. Indices were obtained for solar UVB at the surface for July 1992, and alcohol consumption, and diabetes and obesity prevalence near the 2016–2020 period. Lung cancer incidence rates were also used in the analyses as a surrogate for smoking, diet, and air pollution. The cancers for which solar UVB is significantly associated with reduced incidence are bladder, brain (males), breast, corpus uteri, esophageal, gastric, non-Hodgkin’s lymphoma, pancreatic, and renal cancer. Lung cancer was significantly associated with colorectal, laryngeal, and renal cancer. Diabetes was also significantly associated with breast, liver, and lung cancer. Obesity prevalence was significantly associated with breast, colorectal and renal cancer. Alcohol consumption was associated with bladder and esophageal cancer. Thus diet has become a very important driver of cancer incidence rates. The role of solar UVB in reducing risk of cancer has been reduced due to people spending less time outdoors, wearing sunscreen that blocks UVB but not UVA radiation, and population increases in overweight and obesity, which lowers 25-hydroxyvitamin D concentrations and generates systemic inflammation, a risk factor for cancer. The dietary approach that would reduce the risk of diabetes, obesity, lung cancer, and, therefore cancer, would be one based mostly on whole-plants and restrictions on red and processed meats and ultraprocessed foods. Solar UVB exposure for a few minutes before applying sunscreen and taking vitamin D supplements would also help reduce risk of cancer.Keywords: alcohol consumption; cancer incidence;

Sustainability in Additive Manufacturing (AM) is an emerging area of research that examines the environmental impacts and potential benefits of AM processes compared to traditional manufacturing methods. This paper analyzes the environmental footprint of additive manufacturing technologies, including material usage, energy consumption, and waste production. AM techniques, such as fused deposition modeling (FDM), stereolithography (SLA), and selective laser sintering (SLS), are evaluated for their efficiency and sustainability. Key factors such as resource utilization, lifecycle emissions, and recyclability are assessed to determine how AM can contribute to a more sustainable manufacturing paradigm. The study highlights that while AM offers advantages such as reduced material waste and the potential for localized production, it also poses challenges, including high energy consumption and limited material options. The paper concludes with recommendations for improving the environmental performance of AM, including advancements in material science, energy-efficient technologies, and the integration of circular economy principles. By addressing these aspects, AM can play a significant role in achieving sustainability goals in manufacturing.

Diamond-like carbon (DLC) layers are known for their high corrosion and wear resistance, low friction, and high biocompatibility. However, it is often necessary to dope DLC layers with additional chemical elements to strengthen their adhesion to the substrate. Ti-DLC layers (doped with 0.4, 2.1, 3.7, 6.6, 12.8 at.% of Ti) were prepared by dual pulsed laser deposition, and pure DLC, glass, and polystyrene (PS) were used as controls. In vitro cell-material interactions were investigated with an emphasis on cell adhesion, proliferation, and osteogenic differentiation. We observed slightly increasing roughness and contact angle and decreasing surface free energy on Ti-DLC layers with increasing Ti content. Three-week biological experiments were performed using adipose tissue-derived stem cells (ADSCs) and bone marrow mesenchymal stem cells (bmM-SCs) in vitro. The cell proliferation activity was similar or slightly higher on the Ti-doped materials than on glass and PS. Osteogenic cell differentiation on all materials was proved by collagen and osteocalcin production, ALP activity, and Ca deposition. The bmMSCs exhibited greater initial proliferation potential and an earlier onset of osteogenic differentiation than the ADSCs. The ADSCs showed a slightly higher formation of focal adhesions, higher metabolic activity, and Ca deposition with increasing Ti content.

Fresnel incoherent correlation holography (FINCH) is a well-established incoherent imaging technique. In FINCH, three self-interference holograms are recorded with calculated phase differences between the two interfering, differently modulated object waves and projected into a complex hologram. The object is reconstructed without the twin image and bias terms by a numerical Fresnel back propagation of the complex hologram. A modified approach to implement FINCH by a single camera shot by pre-calibrating the system involving recording of the point spread function library and reconstruction by a non-linear cross-correlation has been introduced recently. The expression of the imaging characteristics from the modulation functions in original FINCH and the modified approach by pre-calibration in spatial and polarization multiplexing schemes are reviewed. The study reveals that a reconstructing function completely independent of the function of the phase mask is required for the faithful expression of the characteristics of the modulating function in the image reconstruction. In polarization multiplexing method by cross-correlation, a partial expression was observed, while in spatial multiplexing method by cross-correlation, the imaging characteristics converged towards a uniform behavior.

Additive manufacturing (AM), commonly known as 3D printing, has revolutionized the production of complex geometries that were once challenging or impossible to achieve through traditional manufacturing techniques. This paper investigates the capabilities of additive manufacturing in producing intricate designs, focusing on the unique advantages and potential applications across various industries. Additive manufacturing enables the creation of complex geometries by adding material layer by layer, allowing for greater design freedom and the ability to produce structures with intricate internal features, complex curves, and lightweight lattice structures. This capability is particularly advantageous in fields such as aerospace, biomedical, and automotive, where weight reduction, customization, and the integration of complex internal channels are critical. The study explores various additive manufacturing technologies, including stereolithography (SLA), selective laser sintering (SLS), and fused deposition modeling (FDM), highlighting their specific strengths and limitations in producing complex geometries. Factors such as material properties, resolution, surface finish, and build size are analyzed to determine the suitability of different AM processes for specific applications. Additionally, the research delves into the design considerations and software tools that facilitate the creation of complex geometries in AM, including generative design and topology optimization. These tools leverage the design freedom offered by AM to optimize structures for weight, strength, and functionality, pushing the boundaries of what is possible in product design. The paper concludes with an examination of the challenges and future directions in the field, such as improving material properties, reducing production costs, and enhancing the accuracy and reliability of AM processes. The potential of additive manufacturing to revolutionize the production of complex geometries is underscored, emphasizing its growing importance in modern manufacturing and its role in enabling innovative solutions across various industries. This abstract provides an overview of the potential and challenges of additive manufacturing for producing complex geometries, suitable for an academic paper or report. If you need more specific information or have a different focus, feel free to ask!

Additive Manufacturing (AM), commonly known as 3D printing, has revolutionized various industries, including the medical field. This technology enables the creation of complex structures layer by layer, offering unprecedented customization and precision. In medical applications, AM has proven transformative in producing patient-specific implants, prosthetics, and anatomical models, facilitating better surgical planning and outcomes. Additionally, it has shown promise in bioprinting, where cells and biomaterials are used to create tissue-like structures for regenerative medicine. The ability to rapidly prototype and manufacture medical devices reduces time and costs, and enhances personalized patient care. This abstract explores the diverse applications, benefits, and challenges of AM in the medical sector, highlighting its potential to revolutionize healthcare and improve patient outcomes.

The field of polymer additive manufacturing (AM) has experienced rapid evolution, marked by significant advancements in materials science and technology. This paper reviews recent innovations in polymer materials tailored for additive manufacturing processes, focusing on enhancements in mechanical properties, functionalization, and processability. Key developments include the introduction of high-performance thermoplastics, composite materials incorporating fibers or nanoparticles, and novel photocurable resins. These materials offer improved strength, durability, and versatility compared to traditional polymers. Furthermore, research into bio-based and recyclable polymers highlights a growing trend towards sustainable manufacturing practices. Advances in material formulations, including self-healing and shape-memory polymers, are also examined for their potential to transform applications across various industries. This review synthesizes current research trends and provides a comprehensive overview of the state-of-the-art in polymer AM materials, emphasizing the impact of these innovations on the future of manufacturing technologies.

Additive manufacturing (AM), commonly known as 3D printing, has emerged as a transformative technology in supply chain management (SCM). This abstract explores how AM influences various aspects of SCM, including inventory management, production processes, and logistics. By enabling on-demand production and reducing reliance on traditional manufacturing methods, AM minimizes inventory costs and enhances customization capabilities. It also facilitates localized production, which can reduce lead times and transportation costs. The integration of AM into SCM fosters greater flexibility and resilience, allowing businesses to respond more swiftly to market changes and disruptions. This study highlights both the opportunities and challenges associated with adopting AM, emphasizing the need for strategic adjustments to fully leverage its potential in modern supply chains.

The integration of additive manufacturing (AM), commonly known as 3D printing, has revolutionized aerospace engineering by enabling the creation of complex, lightweight, and high-performance components. This paper explores the transformative impact of AM technologies on the design, production, and maintenance of aerospace systems. The aerospace industry demands high precision, reduced weight, and enhanced performance, all of which are facilitated by AM's ability to produce intricate geometries and optimize material usage. Key applications of AM in aerospace include the fabrication of engine components, structural parts, and customized tooling. The technology's capability to produce parts with complex internal structures, such as lattice designs, leads to significant weight reductions without compromising strength and durability. Furthermore, AM allows for rapid prototyping, enabling faster iteration and development cycles, which is crucial in the highly competitive aerospace sector.

The advancement of high-temperature structural materials is crucial for the efficiency and performance of modern gas turbines, which are widely used in aviation and power generation. This paper explores the development and optimization of materials capable of withstanding extreme temperatures, mechanical stresses, and corrosive environments within turbine engines. The focus is on nickel-based superalloys, ceramic matrix composites (CMCs), and emerging materials such as high entropy alloys (HEAs) and refractory metals. Nickel-based superalloys are the current standard due to their excellent high-temperature strength and creep resistance, while CMCs offer potential for weight reduction and improved thermal efficiency. High entropy alloys, characterized by their unique multi-component systems, present promising properties including high strength and oxidation resistance at elevated temperatures. Additionally, advances in coating technologies and additive manufacturing are enhancing the durability and performance of these materials. The paper also discusses the challenges associated with material development, including the trade-off between strength and ductility, manufacturing complexities, and the need for long-term performance data. Future research directions are identified, focusing on the integration of computational materials science and advanced characterization techniques to accelerate the discovery and implementation of next-generation high-temperature materials. The successful development of these materials is essential for improving the efficiency and reducing the environmental impact of gas turbines.

In many European countries over the last decades, arable fields dominate agriculture landscapes, leading to a very intensive land-use practices. This reason seems to be the main cause of popula-tions declines for numerous farmland species, including the European hare (Lepus europaeus Pallas, 1778). The Research institute for Animal Production (National Agricultural and Food Centre, Luzianky, Slovakia) has been engaged in a long monitoring project (project currently run-ning), collecting certain indicators of hare population dynamics during hunting season since 1987 to 2023 in the Slovak Danubian Lowland. In the same macro-area (Čiližská Radvaň and Lehnice) a study was conducted on the influence of permanent semi-natural vegetation in relation to re-cruitment, population density and production. The whole monitored period was aggregated into 5-years intervals (for a total of 7 time-intervals), with the aim of analyzing the brown hare popu-lation dynamics. Spring hare density in the Danubian Lowland is currently 20.8 hares/km2, with harvests of 4.6 hares/km2. During all the monitoring period, bag’s animals have been examined following the regular hunting operations for the purpose of age determination (weight of eye lenses), sex ratio and productivity. The results of our analysis showed that the proportion of juve-nile in bag (PYB) among those shot varied from 37.0 % of the last 5-years interval (2018-2023), to a maximum of 51.0 % in interval of years 1998-2002. On total average there were 1.86 juveniles per adult female (r). The proportion of adult females in gamebag varied from 22.58 % (years in-terval 1992-1997) to 31.26 % (years interval 2018-2023). Sex-ratio (SI; males : females) among shot hares showed a value of 0.50, ranged from 0.48 in the period 2008-2012 to 0.52 in the first observed period (years 1987-1991) and in the last one (years 2018-2023). Average weight of shot hares was 4.04 kg (juveniles 3.83 kg, adults 4.27 kg, adult males 4.21 kg and females 4.32 kg). There was a large positive effect of set-aside with special mixtures, created for hares in large-scale farmed agrarian landscape, on hare density, bag and recruitment. In model hunting grounds with such set-asides increased the spring stock by 25 %, bag by 100 % and recruitment by 20 %. This study reveals that the management of European brown hare is not sustainable, and the population is decreasing. It is proved through the decline of harvest hares and by population dynamics parameters. Environmental improvements lead to the stabilization and increasing of requested parameters.

A new method for wide-area urban roof assessment of suitability for solar photovoltaics is introduced and validated. Knowledge of roof geometry and physical features is essential for evaluation of the impact of multiple rooftop solar photovoltaic (PV) system installations on local electricity networks. This paper begins by reviewing and testing a range of existing techniques for identifying roof characteristics. It was found that no current method is capable of delivering accurate results with publicly available input data. Hence a different approach is developed, based on slope and aspect using LIDAR data, building footprint data, GIS tools and aerial photographs. It assesses each roof’s suitability for PV installation. That is, its properties should allow the installation of at least a minimum size photovoltaic system. In this way the minimum potential solar yield for region or city may be obtained. The accuracy of the new method is then established, by ground-truthing against a database of 886 household systems. This is the largest validation of a rooftop assessment method to date. The method is flexible with few prior assumptions. It is based on separate consideration of buildings and can therefore generate data for various PV scenarios and future analyses.

The production of recombinant enzymes, mainly used for obtaining pure and functional target molecules, holds significant importance in modern biotechnology. This study aimed to produce recombinant α-amylases (Amy3500 and Amy1974), derived from B. amyloliquefaciens MDC1974 and B. subtilis MDC3500 respectively, using the pBE-S shuttle vector, and to characterize them. Both α-amylase genes were molecularly cloned into the E. coli/B. subtilis pBE-S shuttle vector, both with (Amy1974sig and Amy3500sig) and without their own signal peptides (Amy1974 and Amy3500), along with a signal peptide originating from the plasmid, and tested in flask fermentations. For recombinant Amy3500, the amylase variants resulted in similar levels of volumetric activity (700-750 U/mL). In contrast, the expression of Amy1974 nearly doubled compared to Amy1974sig with double signal peptides, reaching 2000 U/mL. The SDS-PAGE estimated the molecular weight of Amy1974 α-amylase to be 54.6 kDa, which was in accordance with the theoretical molecular mass calculations. However, the estimated molecular weight of Amy3500 amylase was significantly reduced when exiting the producer cells. Ca2+ had no significant activating effect on the activities of Amy1974 amylase and Amy3500 amylase, likely due to its tight binding to the protein scaffold. Both enzymes exhibited broad activity peaks between 45-70°C, with a maximum at 65°C. The Amy1974 and Amy3500 α-amylases demonstrated broad pH optima and pH-dependent thermostability, with optimum pH values at 6.5 and 5.8, and thermal stability peaks at pH 7.6 and 5.9, respectively. Both α-amylases displayed high relative activity against various starches, including corn amylopectin and potato amylose, while showing comparatively lower activity towards cyclodextrins. The Amy1974 amylase converts starch to dextrins of varying lengths, whereas Amy3500 almost entirely converts starch into glucose.

Objectives: This study aimed to evaluate the risk of hepatitis B virus reactivation (HBVr) in COVID-19 patients receiving immunosuppressive treatment, which has been insufficiently studied to date. Secondarily, we aimed to evaluate the seroprevalence of HBV infection in COVID-19 patients. Methods: We performed an HBV screening in all Romanian adults hospitalized in 4 COVID-19 wards between October 2021 and September 2022. We enrolled patients with positive hepatitis B core antibody (anti-HBc) without protective hepatitis B surface antibody (anti-HBs), HBV treatment or immunosuppressive conditions, whom we followed virologically at 3 months. Results: We identified 333/835 (39.9%) anti-HBc-positive patients. Follow-up was performed in 13 patients with positive hepatitis B surface antigen (HbsAg) and 19 HBsAg-negative/anti-HBc-positive patients. Among those who received immunosuppressants, 4/23 (17.4%) patients experienced HBVr: 1 out of 8 (12.5%) HBsAg-positive patients (with 1.99 log increase in HBV DNA level) and 3 out of 15 (20%) HBsAg-negative/anti-HBc-positive patients (with de novo detectable HBV DNA level). Conclusions: Administration of COVID-19 immunosuppressants may result in a significant risk of HBVr in co-infected patients. We recommend performing an HBV triple screen panel (HBsAg, anti-HBs, anti-HBc) in all COVID-19 patients receiving immunosuppressive treatment. HBV prophylaxis may be indicated in certain patients. Larger studies are needed in order to establish an appropriate and cost-effective management in these patients.

The chicken embryo is a widely used experimental animal-model in many studies such as developmental biology and to study the physiological responses and adaptation to altered environments as well as for cancer and neurobiology research. Embryonic heart rate is an important physiological variable useful as an index reflecting the embryo's natural activity and is considered one of the most difficult parameters to measure. An acceptable measurement technique of embryonic heart rate should provide a reliable cardiac signal quality while maintaining adequate gas exchange through the eggshell along the incubation and embryonic developmental period. In this paper, we presented a detailed design and methodology for a non-invasive PPG-based prototype (Egg-PPG) for real-time and continuous monitoring of embryonic heart rate during incubation. An automatic embryonic cardiac wave detection algorithm, based on normalised spectral entropy, is described. The developed algorithm successfully estimated the embryonic heart rate with 98.7% accuracy. We believe that the developed overall system presented in this paper is showing a promising solution for non-invasion, real-time monitoring of embryonic cardiac signal, which can be used in both experimental studies (e.g., developmental embryology and cardiovascular research) and in industrial incubation applications.

Data integration has been proven to provide valuable information. The information extracted using data integration in the form of multiblock analysis can pinpoint both common and unique trends in the different blocks. When working with small multiblock datasets the number of possible integration methods is drastically reduced. To investigate the application of multiblock analysis in cases where one has few number of samples, we studied a small metabolomic multiblock dataset containing six blocks (i.e. tissue types), only including common metabolites. We used a single model multiblock analysis method called Joint and unique multiblock analysis (JUMBA) and compare it to a commonly used method, concatenated PCA. These methods were used to detect trends in the dataset and identify underlying factors responsible for metabolic variations. Using JUMBA, we were able to interpret the extracted components and link them to relevant biological properties. JUMBA shows how the observations are related to one another, the stability of these relationships and to what extent each of the blocks contribute to the components. These results indicate that multiblock methods can be useful even with a small number of samples.

Tomato (Solanum lycopersicum L.) is a valuable horticultural crop grown and consumed worldwide. Optimum production is hindered by several factors of which Verticillium dahliae, the cause of Verticillium wilt, is one of the major biological constraints in temperate production regions. V. dahliae is difficult to manage because it is a vascular pathogen, has a broad host range and worldwide distribution, and can persist in soil for years. Understanding the pathogen virulence and genetic diversity, host resistance, and plant-pathogen interactions can ultimately inform the development of integrated strategies to manage the disease. In recent years, considerable research has focused on providing new insight into these processes as well as the development and integration of environment-friendly management approaches. In this review, we discuss and summarize the recent findings on the race and population structure of V. dahliae; pathogenicity factors; host genes, proteins, and enzymes involved in defense; the emergent management strategies, and recent approaches to managing Verticillium wilt in tomatoes.

During HIV-1 virus assembly the genomic RNA (vRNA) is selected for packaging by the viral protein Gag because it contains a specific packaging signal, Psi. While there have been numerous studies of Gag-Psi interactions, there is almost no information on kinetic aspects of this interaction. We have investigated the kinetics of Gag binding to different RNAs using switchSENSE DRX2 technology. We measured the association rate of Gag binding to monomeric Psi, to a “Multiple Binding Site Mutant” Psi that is inactive for genome packaging in vivo, and to a scrambled Psi. We discovered that Gag binds more rapidly to Psi RNA than to the mutant or scrambled RNAs. Furthermore, rapid Gag association kinetics are retained within sub-regions of Psi: Gag associates more rapidly with RNA containing only the 3’ two of the three Psi stem-loops than with monomeric RNA containing the 5’ two stem-loops or a scrambled RNA. No differences were detectable with individual Psi stem-loops. Interestingly, the rate of binding of Gag molecules to Psi increases with increasing Gag concentration, suggesting cooperativity in binding. The results are consistent with the hypothesis that selectivity in packaging derives from kinetic differences in initiation of particle assembly.

Non-coding RNAs (ncRNAs) comprise a diverse class of non-protein coding transcripts that regulate critical cellular processes associated with cancer. Advances in RNA-sequencing (RNA-Seq) have led to the characterization of non-coding RNA expression across different types of human cancers. Through comprehensive RNA-Seq profiling, a growing number of studies demonstrate that ncRNAs, including long non-coding RNA (lncRNAs) and microRNAs (miRNA), play central roles in progenitor B-cell Acute Lymphoblastic Leukemia (B-ALL) pathogenesis. Furthermore, due to their central roles in cellular homeostasis and their potential as biomarkers, the study of ncRNAs continues to provide new insight into the molecular mechanisms of B-ALL. This article reviews the ncRNA signatures reported for all B-ALL subtypes, focusing on technological developments in transcriptome profiling and recently discovered examples of ncRNAs with biologic and therapeutic relevance in B-ALL.

Annually, more than 1.5 million preventable new hepatitis B (HBV) infections continue to occur, with an estimated global burden of 296 million individuals living with chronic hepatitis B infection. This substantial health challenge results in over 820,000 annual deaths attributed to complications such as liver cirrhosis and hepatocellular carcinoma (HCC). HBV vaccination remains the cornerstone of public health policy to prevent chronic hepatitis B and its related complications. It serves as a crucial element in the global effort to eliminate HBV, as established by the World Health Organization (WHO), with an ambitious 90% vaccination target by 2030. However, reports on global birth dose coverage reveal substantial variability, with an overall coverage rate of only 46%. This comprehensive review thoroughly examines global trends in HBV vaccination coverage, investigating the profound impact of vaccination on HBV prevalence and its consequences across diverse populations, including both high-risk and general demographics. Additionally, the review addresses the formidable challenges and facilitating factors essential for achieving WHO's HBV vaccination coverage objectives and elimination strategies in the coming decade and beyond.

PET imaging of bacterial infection could potentially provide added benefit for patient care by non-invasive means. [68Ga]Ga-desferrioxamine B – a radiolabelled siderophore – shows specific uptake by human-pathogenic bacteria like Staphylococcus aureus or Pseudomonas aeruginosa as well as sufficient serum stability for clinical application. Here, we provide data for automated production of [68Ga]Ga-desferrioxamine B on two different cassette based synthesis modules (Modular-Lab PharmTracer and GRP 3V) using commercially available cassettes together with an approved 68Ge/68Ga radionuclide generator. Quality control including determination of radiochemical purity as well as a system suitability test was set up via RP-HPLC on a C18 column. The two described production processes, using an acetic acid/acetate buffer system with ascorbic acid as a radiation scavenger for radiolabelling, yield ready-to-use formulations with sufficient activity yield. Batch data showed radiochemical purity of &gt;95 % as determined by RP-HPLC and ITLC as well as excellent stability over 2 hours post production. Specifications for routine production were set up and validated with four master batches for each synthesis module. Based on this study, an academic clinical trial for imaging of bacterial infection was initiated. Both described synthesis methods enable reproducible, automated in-house production of [68Ga]Ga-desferrioxamine B for clinical application.

Background: Across the world, antibiotic resistance is a grave problem. To address this issue, it is necessary to investigate new antibiotic sources. Aim of the study: Egypt's diverse soil habitats were used to produce bacterial Myxopyronin B, which was then tested for antimicrobial activity in preclinical animal studies and randomized human clinical trials stages 1/2. Type of the study: Screening experimental study. Methodology: Egypt's various soil conditions were examined for the development of bacterial isolates that produced the antibiotic compound Myxopyronin B. Reversed phase HPLC was used to purify Myxopyronin B. To determine the test antibiotic's minimum inhibitory concentration( MIC) and invitro antibacterial activity, the Broth microdilution method and the Paper disc diffusion assay were utilized. Moreover, in vivo antibacterial spectrum, adverse medication responses, and pharmacokinetics were found in preclinical animal testing stages and phases 1/2 of randomized clinical studies involving volunteer humans. Results: Myxopyronin B was generated from the culture supernatant of Myxococcus SDU36, the main soil bacterial isolate cultured on a Casein yeast peptone plate. With MICs less than 100 mcg/ml, the test antibiotic prevented the growth of several Gram +ve bacteria, whereas, at MICs higher than 100 mcg/ml, it inhibited the development of a small number of Gram -ve bacteria, including Escherichia coli. However, eukaryotic cells—such as those found in fungi and humans—were unaffected. The test antibiotic was seen to inhibit prokaryotic DNA-dependent RNA polymerase( RNLP), indicating its bactericidal activity. Mean Cmax was 9-10 mcg/ ml at mean Tmax 1 hour when 600 mg dose was orally administered in randomized human clinical trials phases 1/2, and T1/2 reached 2.25 hours following first-order kinetics of elimination. Duration of its action was nearly 8 hours after oral administration. Rare toxicity was detected during preclinical and randomized human clinical trials phases 1/2 in the form of mild diarrhea and GI upset in less than 7 % of experimental candidates. It exhibited approximately 90% plasma protein binding, especially with albumin which resulted in prolonged therapeutic action. It showed a concentration dependant antibiotic killing effect. With the concentration-dependent killing pattern, the higher the drug concentration relative to the pathogen minimum inhibitory concentration( MIC), the greater the rate and extent of antimicrobial activity. Conclusion: The present study was promising due to the production of the bactericidal antibiotic Myxopyronin B from Myxococcus sp. SDU36 isolated from different soil environments in Egypt.

In this study, we used Chlorella vulgaris (C.vulgaris) grown in the dairy wastewater as biomass to produce a third-generation biodiesel. The lipids were extracted from the biomass and the biodiesel obtained by transesterification. Following ASTM and EN guidelines, the biodiesel was assessed along with its density, viscosity, heating value, and flash point. Gas chromatography was used to evaluate the concentration, composition, and type of fatty acid methyl esters. The results showed a biodiesel yield of 93% with a composition of 33% saturated, 28% monounsaturated, and 37% polyunsaturated. Engine testing was carried out to monitor the levels of CO, CO2, NOx, and smoke emissions as well as to assess the biodiesel performance. Results demonstrate the possibility of producing third-generation biodiesel from C. Vulgaris cultivated in dairy wastewater. The proposed process valorize the dairy wastewater and might represent an alter-native approach for biodiesel production and the disposal of the wastewater.

Background: Biomarker development, improvement, and clinical implementation in the context of kidney disease has been a central focus of biomedical research for decades. To this point, only serum creatinine and urinary albumin excretion are well accepted biomarkers in kidney disease. With their known blind spot in early stages of kidney impairment and diagnostic limitations there is a need for better and more specific biomarkers. With the rise of large-scale analysis of thousands of peptides in serum or urine samples using mass spectrometry techniques hopes for biomarker development were high. Advances in proteomic research have led to the discovery of an increasing amount of potential proteomic biomarkers and identification of candidate biomarkers for clinical implementation in the context of kidney disease management. In this review we focus on urinary peptide and especially peptidomic biomarkers emerging from recent research and underline the role of those with the highest potential for clinical implementation. Methods: The Web of Science database (all databases) was searched on October 17th, 2020, using the search terms “marker*” OR biomarker* AND “renal disease” OR “kidney disease” AND “proteome*” OR “peptid*” AND “urin*”. English, full-text original articles on humans published within the last 5 years were included which were cited at least 5 times per year. Studies based on animal models, renal transplant studies, metabolite studies, studies on miRNA and studies on exosomal vesicles were excluded focusing on urinary peptide biomarkers. Results: The described search led to the identification of 3668 articles and application of inclusion and exclusion criteria as well as abstract and consecutive full-text analysis of 3 independent authors to a final number of 62 studies for this manuscript. The 62 manuscripts encompassed 8 established single peptide biomarkers and several proteomic classifiers including CKD273 and IgAN237. Discussion: This review provides a summary of recent evidence on single peptide urinary biomarkers in CKD while emphasizing the increasing role of proteomic biomarker research with new research on established and new proteomic biomarkers. Lessons learned from the last 5 years in this review might encourage future studies hopefully resulting in routine clinical applicability of new biomarkers.

Abiotic stress is responsible for significant reduction in crop plant productivity worldwide. Ultraviolet (UV) radiation is a natural component of sunlight and a permanent environmental stimulus. This study investigated the distinct responses of young wheat and einkorn plants to excessive UV-B radiation (180 min at λmax 312 nm) following foliar pretreatment with 1 µM synthetic cytokinin 4PU-30. Results demonstrated that UV radiation significantly amplified hydrogen peroxide levels in both wheat and einkorn, with einkorn exhibiting more pronounced increase compared to wheat. This elevation indicated the induction of oxidative stress by UV radiation in the two genotypes. Intensified antioxidant enzyme activities and increased accumulation of typical stress markers and non-enzyme protectants were evidenced. Transcriptional activity of genes encoding key antioxidant enzymes was also investigated aiming to elucidate the genetic regulation of the antioxidant systems in both wheat and einkorn seedlings. Our results suggested a role for POX1 and POX7 genes in the UV-B tolerance of the two wheat species as well as a cytokinin stimulated UV-B stress response in einkorn mediated through upregulation of the tau subfamily gene GSTU6. Based on these findings it could be concluded that 4PU-30 had the potential of alleviating oxidative stress by attenuating the symptoms of superfluous UV-B illumination in the two examined plant species.

Systemic Lupus Erythematosus (lupus) and B-cell lymphoma (lymphoma) are serious diseases. Lupus and lymphoma co-occur at higher-than-expected rates and primarily depend on B-cells for their pathology, implicating shared inflammation-related B-cell molecular mechanisms as a potential cause of co-occurrence. We consequently implemented a novel Immune Imbalance Transcriptomics (IIT) algorithm and applied IIT to lupus, lymphoma, and healthy B-cell RNA-seq data to find shared- and contrasting mechanisms potentially targetable for treatment. We observed 8,562 genes significantly dysregulated in both lupus and lymphoma. Of those genes, we found 5,335 to have a significant immune imbalance, defined as significant dysregulation by both diseases, as determined by IIT. Gene Ontology (GO) term and pathway enrichment of IIT genes yielded immune-related “Neutrophil Degranulation” and “Adaptive Immune System”, validating that the IIT algorithm isolates biologically relevant genes in immunity and inflammation. We found that 389 IIT gene products are drug-targetable with established or repurposed drugs. Among our results, we found 40 known and 349 novel lupus targets, along with 151 known and 238 novel lymphoma targets. Known disease drug targets in our IIT results further validate that IIT isolates genes with disease-relevant mechanisms. We anticipate the IIT algorithm and shared and contrasting gene mechanisms uncovered here will contribute to the development of immune-related therapeutic options for lupus and lymphoma patients.

One of the oldest problems in physics is that of calculating the motion of N particles under a specified mutual force: the N-body problem. Much is known about this problem if the specified force is non-relativistic gravity, and considerable progress has been made by considering the problem in one spatial dimension. Here I review what is known about the relativistic gravitational N-body problem. Reduction to one spatial dimension has the feature that gravitational radiation is absent, thereby allowing for a clear comparison between the physics of one-dimensional relativistic and non-relativistic self-gravitating systems. After describing how to obtain a relativistic theory of gravity coupled to N point particles, I discuss in turn the 2-body, 3-body, 4-body, and N-body problems. Quite general exact solutions can be obtained for the 2-body problem, unlike the situation in general relativity in 3 spatial dimensions for which only highly specified solutions exist. The 3-body problem exhibits mild forms of chaos, and provides one of the first theoretical settings in which relativistic chaos can be studied. For N4 other interesting features emerge. Relativistic self-gravitating systems have a number of interesting problems awaiting further investigation, providing us with a new frontier for exploring relativistic many-body systems.

Chronic Hepatitis B (CHB) Virus infection is major etiological factor for liver cirrhosis and/ or liver cancer. The viral protein, major contributor in predisposition of chronicity and Hepatocellular Carcinoma (HCC) is Hepatitis B x (HBx) protein. Its dynamic subcellular distribution to an extent determines its multifactorial role. It is a regulatory protein which modulates viral as well as host machinery in favours to HBV persistence. An insight on HBx stabilising factors is critical for therapeutic purpose. The precise role of HBx in the pathogenesis of Chronicity of HBV is not known. Summary: This review comprehensively summarizing different mechanisms and their regulation by HBx protein with respect to chronicity and HCC emphasising viral persistence. Key Messages 1. HBx is a key protein for viral persistence. 2. Dynamic subcellular distribution of HBx determines its function. 3. HBx modulates cellular machinery to favours HBV survival. 4. HBx affects various intermediary mechanisms contributing to disease progression. 5. HBx may be a potent target to prevent the disease progression towards HCC.

One of the most common subgroups of cutaneous T-cell lymphomas is the that of primary cutaneous CD30 positive lymphoproliferative disorders. The group includes lymphomatoid papulosis (LyP) and primary cutaneous anaplastic large cell lymphoma (pcALCL), as well as some borderline cases. Recently, significant progress has been made in understanding the genetics and treatment of these disorders. This review article summarizes the clinical evidence supporting the current treatment options in these diseases. Recent years have seen the introduction of novel agents into clinical practice; most of these target CD30, such as anti-CD30 monoclonal antibodies and conjugated antibodies (brentuximab vedotin), bispecific antibodies and cellular therapies, particularly anti-CD30 CAR-T cells. This paper briefly reviews the biology of CD30 that makes it a good therapeutic target, and describes the anti-CD30 therapies that have emerged to date.

International data suggests that exposure for nature is beneficial for mental health and well-being. The restrictions related to Covid-19 pandemic have created a setting that allows us to investigate the importance of greenness exposure on mental health during a period of increased isolation and worry. Based on 2060 responses from an online survey in the Stockholm County, Sweden, we investigated: 1) weather the Covid-19 pandemic changed peoples’ life-style and nature-related habits, and 2) if peoples’ mental health differed depending on their exposure to greenness. Neighbourhood greenness levels were quantified by using the average Normalized Difference Vegetation Index (NDVI) within 50m, 100m, 300m, and 500m buffers surrounding the participant’s place of residence. We found that the number of individuals that reported that they visited natural areas “often” was significantly higher during the pandemic than before the pandemic. Higher levels of greenness surrounding one’s location of residence were in general associated with higher mental health/wellbeing and vitality scores, and less symptoms of depression, anxiety, and perceived and cognitive stress, after adjustments for demographic variables and walkability. In conclusion, the results from the present study provided support to the suggestion that contact with nature may be important for mental health in extreme circumstances.

Background: Approximately 10-20% of subjects vaccinated with HBsAg-based hepatitis B virus (HBV) vaccines are non-responders. BM32 is a recombinant grass pollen allergy vaccine containing the HBV-derived preS surface antigen as immunological carrier protein. PreS includes the binding site of HBV to its receptor on hepatocytes. We investigated if immunological non-responsiveness to HBV after repeated HBsAg-based vaccinations can be overcome by immunization with VVX001 (i.e., Alum-adsorbed BM325, a component of BM32). Methods: A subject failing to develop protective HBV-specific immunity after HBsAg-based vaccination received five monthly injections of 20 µg VVX001. PreS-specific antibody responses were measured by ELISA and micro-array technology. Serum reactivity to subviral particles of different HBV genotypes was determined by sandwich ELISA. PreS-specific T cell responses were monitored by CFSE staining and subsequent FACS analysis. HBV neutralization was assessed using cultured HBV-infected HepG2 cells. Results: Vaccination with VVX001 induced a strong and sustained preS-specific antibody response composed mainly of the IgG1 subclass. PreS-specific IgG antibodies were primarily directed to the N-terminal part of preS containing the NTCP attachment site. IgG reactivity to sub-viral particles as well as to the N-terminal preS-derived peptides was comparable for HBV genotypes A-H. A pronounced reactivity of CD3+CD4+ lymphocytes specific for preS after the complete injection course remaining up to one year after the last injection was found. Maximal HBV neutralization (98.4%) in vitro was achieved 1 month after the last injection which correlated with the maximal IgG reactivity to the N-terminal part of preS. Conclusion: Our data suggest that VVX001 may be used as a preventive vaccination against HBV even in non-responders to HBsAg-based HBV vaccines.

The proliferation and survival signals emanating from the B-cell receptor (BCR) constitute a crucial aspect of mature lymphocyte’s life. Dysregulated BCR signaling is considered a potent contributor to tumor survival in different subtypes of B cell non-Hodgkin lymphomas (B-NHLs). In the last decade, emergence of BCR-associated kinases as rational therapeutic targets has led to the development and approval of several small molecule inhibitors targeting either Bruton's tyrosine kinase (BTK), spleen tyrosine kinase (SYK), or phosphatidylinositol 3 kinase (PI3K), offering alternative treatment options to standard chemoimmunotherapy, and making some of these drugs valuable assets in the anti-lymphoma armamentarium. Despite their initial effectiveness, these precision medicine strategies are limited by primary resistance in aggressive B-cell lymphoma like diffuse large B cell lymphoma (DLBCL) and mantle cell lymphoma (MCL), especially in the case of first generation BTK inhibitors. In these patients, BCR-targeting drugs often fail to produce durable responses, and nearly all cases eventually progress with a dismal outcome, due to secondary resistance. This review will discuss our current understanding of the role of antigen-dependent and antigen-independent BCR signaling in DLBCL and MCL and will cover both approved inhibitors and investigational molecules being evaluated in early preclinical studies. We will discuss how the mechanisms of action of these molecules, and their off/on-target effects can influence their effectiveness and lead to toxicity, and how our actual knowledge supports the development of more specific inhibitors and new, rationally based, combination therapies, for the management of MCL and DLBCL patients.

This study describes the seasonal course of denitrifying and nitrate reducing bacteria in a dimictic mesotrophic lake (Lake Scharmützelsee, Brandenburg, Germany) within a three-year period from 2011 to 2013. The bacterial cell numbers were quantified by fluorescence microscopy, most probable number (MPN) and PCR dependent quantification of the chromosomal 16S rDNA and of the nirS and nirK gene copy number. The highest seasonal differences (up to three orders of magnitudes) has been measured by MPN in the epilimnion. This variation was not reflected by PCR dependent approaches or direct microscopical enumeration. At adverse conditions (low temperature and/or low nitrate concentrations), the differences between MPN and gene copy numbers increased up to five orders of magnitudes and decreased to one magnitude at favorable environmental conditions. These results can be explained best by an increasing ratio of viable but not cultivable (VBNC) cells or dead cells at impairing conditions. In the hypolimnion, the courses of MPN and nir gene copy numbers were similar. This can be explained by higher feeding pressure and therefore smaller amounts of dormant cells. In the pelagial in general, the total cell numbers enumerated by either microscopical or molecular approaches were similar. In the sediment, more than 99 % of the DNA was obviously not related to viable bacteria but was rather “dead DNA” in dead cells or adsorbed to particle surfaces.

The most widely accepted scientific theory for the origin of life on Earth is that prokaryotic microbes evolved from simple organic compounds in seawater under anoxic conditions. For about 1 billion years thereafter, these microbes consumed the same dissolved organic matter (DOM) from which they had evolved before scarcity of DOM forced the evolution of cyanobacterial photosynthesis followed by eukaryosis. Could the more efficient consumption of DOM have also stimulated the subsequent origin of multicellular animal life? In this report, we synthesize past and recent evidence to propose the “DOM uptake hypothesis” for the origin of metazoans. A choanoflagellate-like protozoan was the likely ancestor of the first sponge-like metazoan to evolve on Earth. Choanoflagellates have outwardly facing flagellae that are subject to viscous water movement, while sponges have choanocytes in chambers with flagellae directed to pump water with greater fluidity across an aquiferous system with a huge cellular surface area. While generally considered particle feeders, both choanoflagellates and sponges absorb DOM, with some sponges relying on DOM for as much as 90% of their diet. We propose that the earliest metazoans may have evolved to survive the dire nutritional conditions of the Cryogenian “snow-ball Earth” period (~700 million years ago) by developing a body plan with the enhanced ability to absorb low concentrations of DOM in seawater from sources such as the viral lysis of microbes, exudates of benthic stromatolites, or refractory DOM compounds. Additionally, species of extant sponges that have a high abundance of microbes living in their bodies consume the greatest amounts of DOM, suggesting that the DOM uptake hypothesis may also be dependent on microbial symbiosis.

In order to achieve the elimination of the negative impacts of transport on road safety, the European Union is taking various measures resulting from its commitment to improve road safety. One of the instruments for achieving the objectives set is social legislation for the work of drivers in road freight and passenger transport. In line with the objective of improving the quality of working conditions for road transport drivers and road safety, the European Union applies Regulation (EC) No 561/2006 on the harmonisation of certain social legislation relating to road transport, which lays down rules on driving times, breaks and rest periods for drivers operating in road freight and passenger transport. The main objective of the paper is to assess the impact of social legislation on road transport safety by means of real research and to identify the factors influencing the violation of the legislation depending on the type of transports carried out in domestic or international road freight transport.

This paper aims to outline the effectiveness of modern universal gate quantum computers when utilizing different configurations to solve the B-SAT(Boolean Satisfiability) problem. The quantum computing experiments are performed using Grover’s Search algorithm to find a valid solution. The experiments are performed under different variations to demonstrate their effects on the results. Changing the number of shots, qubit mapping, and using a different quantum processor are all among the experimental variables. The study also branches into a dedicated experiment highlighting a peculiar behavior that IBM quantum processors exhibit when running circuits with a certain number of shots.

Peanut hulls (PH) are an edible food waste that is an underutilized food source for human consumption. While edible and palatable, they are mainly diverted to livestock feed or building materials. Here, we describe existing literature on human food valorization of PHs and propose methods to optimize recapturing nutrients (e.g. protein, fiber, polyphenols) lost by treating PHs as waste. Incorporated into common foods, PHs can be processed into functional ingredients to improve nutrient-density and the corresponding positive health outcomes associated with increases in plant foods. PH valorization can also address additional priorities of the UN Sustainable Development Goals using a Food Systems Approach (FSA) including food waste, increasing economic opportunities for farmers, and increasing the availability of healthy shelf-stable foodstuffs to address food security. Recent advances in sustainable food processing technologies can be utilized to safely incorporate peanut hulls into human food streams. We propose future applications that could make meaningful impacts to food availability and the nutritional composition of common foods. While the limited literature on this topic spans several decades, no global operations exist to incorporate peanut hulls and most publications precede the technological ‘green revolution’. The approaches outlined in this review may help bolster commercialization of this underutilized and nutritious food potentially improving opportunities for multiple global stakeholders.

Abstract: Medication overuse headaches is a frequent phenomenon observed in individuals suf-fering from chronic headaches. It arises due to the excessive consumption of pain-relief medica-tions, resulting in the escalation and continuous persistence of headache symptoms. Nevertheless, the prevalence and distinctive characteristics of medication overuse headaches in the pediatric population have not been comprehensively explored. The primary objective of this research is to delineate the features of medication overuse headaches in children, particularly emphasizing the investigation of its epidemiology and the diagnostic patterns for headaches. We conducted a ret-rospective study by and analyzed the medical records of children and adolescents who were evaluated at outpatient pediatric headache clinic at the Bnai Zion medical center for headache during the period spanning 2007 to 2017. Our study encompassed a cohort of 1008 patients expe-riencing headaches. Among these participants, 268 individuals (26.6%) were diagnosed with mi-graine, 250 (24.8%) exhibited tension-type headaches (TTH), and 490 (48.6%) were classified as having undifferentiated headaches. Out of the whole group, 65 had chronic headaches: 35 (54%) with migraine, 20 (30%) with tension-type headaches (TTH), and 10 (15%) with undifferentiated headache of childhood, with the majority (73%) being female.In summary, medication overuse headaches are a prevalent issue among children grappling with chronic headaches. Intriguingly, they appear to be more pronounced within the tension-type headache (TTH) group compared to migraine sufferers, and exhibit a higher prevalence among females. This study underscores the significance of early detection and careful management of medication overuse headaches in pedi-atric cases, shedding light on its distinct characteristics in the realm of childhood headache disor-ders. Further research is warranted to elucidate the underlying factors contributing to the ob-served gender disparity and the distinct prevalence rates among different headache subtypes.

Breaking up prolonged sitting by short bouts of light physical activities including standing and walking has been shown to be beneficial for people with type 2 diabetes (T2D). This paper presents the development of an android mobile app to deliver a just-in-time adaptive intervention (JITAI) to reduce sedentary time in people with T2D. A total of six design workshops were conducted with seven experts to identify design requirements, a behavioural framework, and required contextual adaptations for the development of a bespoke mobile app (iMOVE). Moreover, a focus group was conducted among people with T2D as potential end-users (N=10) to ascertain their perceptions of the app. Feedback from the focus group was used in subsequent iterations of the iMOVE app. Data were analysed using an inductive qualitative thematic analysis. Based on workshops, key features of iMOVE were developed, including simplicity (e.g., navigation, login), colours and font sizes, push notifications, messaging algorithms and a triggering system for breaking up sitting time and moving more. Based on the user testing results, a goal setting tab was added, font sizes were made larger, the brightness of colours was reduced, and a colour indicator was used to indicate device connectivity with an activity tracker. A user-centric app was developed to support people with T2D to transition from sedentary to active lifestyles.

We have developed additive logistic models for the occurrence of lightning, large (≥ 2 cm), and very large (≥ 5 cm) hail to investigate the evolution of these hazards in the past, in the future, and for forecasting applications. The models, trained with lightning observations, hail reports, and predictors from atmospheric reanalysis, assign an hourly probability to any location and time on a 0.25° × 0.25° × 1-hourly grid as a function of reanalysis-derived predictor parameters, selected following an ingredients- based approach. The resulting hail models outperform the Significant Hail Parameter and the simulated climatological spatial distributions and annual cycles of lightning and hail are consistent with observations from storm report databases, radar, and lightning detection data. As a corollary result, CAPE released above the -10°C isotherm was found to be a more universally skilful predictor for large hail than CAPE. In the period 1950–2021, the models applied to the ERA5 reanalysis indicate significant increases of lightning and hail across most of Europe, primarily due to rising low-level moisture. The strongest modelled hail increases occur in northern Italy with increasing rapidity after 2010. Here, very large hail has become 3 times more likely than it was in the 1950s. Across North America trends are comparatively small, apart from isolated significant increases in the direct lee of the Rocky Mountains and across the Canadian Plains. In the southern Plains, a period of enhanced storm activity occurred in the 1980s and 1990s.

Hemicellulose is one of the most important natural polysaccharides in nature. Hemicellulose from different sources varies in chemical composition and structure, which in turn affects the modification effects and industrial applications. Grain and oil by-products (GOBP) are important raw materials for hemicellulose. This article reviews the modification methods of hemicellulose in GOBP. The effects of chemical and physical modification methods on the properties of hemicellulose biomaterials were evaluated. The potential applications of GOBP hemicellulose in films, hydrogel, Three-dimensional (3D) printing and adsorbent are discussed. Future research directions and recommendations are also proposed to provide theoretical foundations and technical support for the efficient utilization of these by-products.

Despite widespread use of combined antiretroviral therapy (cART) and increased life expectancy in people living with HIV (PLWH), HIV-related lymphomas (HRL) remain a leading cause of cancer morbidity and mortality for PLWH, even in patients optimally treated with cART. While incidence of aggressive forms of non-Hodgkin lymphoma decreased after cART advent, incidence of Hodgkin lymphoma (HL) has increased among PLWH in recent decades. The coinfection of Epstein Barr virus plays a crucial role in the pathogenesis of HL in the HIV setting. Currently, PLWH with HRL, including HL, are treated similarly to HIV-negative patients and, importantly, the prognosis of HL in PLWH is approaching to that of the general population. In this regard, effective chem-otherapy is strongly recommended since it has been shown to improve survival rates in all lymphoma subtypes, including HL. As a consequence, interdisciplinary collaboration between HIV specialists and hemato-oncologists for the management of potential drug-drug interactions and overlapping toxicities between antiretroviral and antineoplastic drugs is crucial for the op-timal treatment of PLWH with HL. In this article the authors review and update the epidemio-logical, clinical and biological aspects of HL presenting in PLWH with special emphasis in the improvement on prognosis and the factors that have contributed to it.

Despite widespread use of combined antiretroviral therapy (ART) and increased life expectancy in people living with HIV (PLWH), HIV-related lymphomas (HRL) remain a leading cause of cancer morbidity and mortality for PLWH, even in patients optimally treated with ART. While incidence of aggressive forms of non-Hodgkin lymphoma decreased after ART advent, incidence of Hodgkin lymphoma (HL) has increased among PLWH in recent decades. The coinfection of Epstein Barr virus plays a crucial role in the pathogenesis of HL in the HIV setting. Currently, PLWH with HRL, including HL, are treated similarly to HIV-negative patients and, importantly, the prognosis of HL in PLWH is approaching to that of the general population. In this regard, effective chemotherapy is strongly recommended since it has been shown to improve survival rates in all lymphoma subtypes, including HL. As a consequence, interdisciplinary collaboration between HIV specialists and hemato-oncologists for the management of potential drug-drug interactions and overlapping toxicities between antiretroviral and antineoplastic drugs is crucial for the optimal treatment of PLWH with HL. In this article the authors review and update the epidemiological, clinical and biological aspects of HL presenting in PLWH with special emphasis in the improvement on prognosis and the factors that have contributed to it.

The BNT162b2 vaccine is globally used for preventing morbidity and mortality related to COVID-19. Cancer patients have had priority for receiving the vaccine due to their diminished immunity. This study reports the response of administering the 3rd and 4th vaccine doses to can-cer patients receiving active anti-neoplastic treatment. 142 patients have received two doses of the mRNA-based BNT162b2 COVID-19 vaccine, while 76 and 25 patients have received three and four doses, respectively. The efficacy of the humoral response following two vaccine doses was diminished in cancer patients, especially in the group of patients receiving chemotherapy. In a multivariate analysis, patients after three and four BNT162b2 vaccine doses were more likely to have antibody titers in the upper tertile compared to patients after two doses of the vaccine (odds ratio (OR) 7.62 (95% CI 1.38-42.12), p=0.02 and 17.15 (95% CI 5.01-58.7), p<0.01, respective-ly). Unlike the response after two doses, the 3rd and 4th BNT162b2 vaccine booster doses, had an increased efficacy of 95-100% in cancer patients while on active treatment. This result could be explained by different mechanisms including the development of memory B cells.

Hepatitis B virus (HBV) is known to cause severe liver diseases such as acute or chronic hepatitis, liver cirrhosis and hepatocellular carcinoma. Chronic hepatitis B (CHB) infection is a major health problem with nearly 300 million individuals infected worldwide. Currently, nucleos(t)ide analogs (NAs) and interferon alpha are clinically approved treatments for HBV infection. NAs are potent antiviral agents that bind to HBV polymerase and block viral reverse transcription and replication. Besifovir dipivoxil maleate (BSV) is a newly developed NA against HBV in the form of acyclic nucleotide phosphonate that is available for oral administration similar to adefovir and tenofovir. Until now, resistance to BSV treatment has not been reported. In this study, we found a CHB patient who showed viral breakthrough after long-term treatment with BSV. The isolated HBV DNA from patient’s serum were cloned into the replication-competent HBV 1.2mer and the sequence of reverse transcriptase (RT) domain of HBV polymerase were analyzed. We also examined the drug susceptibility of generated clones in vitro. Several mutations were identified in HBV RT domain. A particular mutant harboring ten RT mutations showed resistance to BSV treatment in vitro. The ten mutations include rtV23I (I), rtH55R (R), rtY124H (H), rtD134E (E), rtN139K (K), rtL180M (M), rtM204V (V), rtQ267L (L), rtL269I (I) and rtL336M (M). To further identify the responsible mutations for BSV resistance, we performed in vitro drug susceptibility assay on several artificial clones. As a result, our study revealed that rtL180M (M) and rtM204V (V) mutations, already known as lamivudine-resistant mutations, confer resistance to BSV in the CHB patient.

Acidic ostreolysin A/pleurotolysin B (OlyA/PlyB, formerly known as ostreolysin (Oly), and basic 20 kDa equinatoxins (EqTs) are cytolytic proteins isolated from the edible mushroom Pleurotus ostreatus and the sea anemone Actinia equina, respectively. Both toxins, although from different sources, share many similar biological activities: (i) colloid-osmotic shock by forming pores in cellular and artificial membranes enriched in cholesterol and sphingomyelin; (ii) increased vascular endothelial wall permeability in vivo and perivascular oedema; (iii) dose-dependent contraction of coronary vessels; (iv) haemolysis with pronounced hyperkalaemia in vivo; (v) bradycardia, myocardial ischemia and ventricular extrasystoles accompanied by progressive fall of arterial blood pressure and respiratory arrest in rodents. Both types of toxins are haemolytic within nanomolar range concentrations, and it seems that hyperkalaemia plays an important role in toxin cardiotoxicity. However, it was observed that the haemolytically more active EqT III is less toxic than EqT I, the most toxic and least haemolytic EqT. In mice, EqT II is more than 30 times more toxic than OlyA/PlyB when applied intravenously. These observations imply that haemolysis with hyperkalaemia is not the sole cause of the lethal activity of both toxins. Additional mechanisms responsible for lethal action of the two toxins are direct effects on heart, coronary vasoconstriction and related myocardial hypoxia. In this review, we appraise the pathophysiological mechanisms related to the chemical structure of OlyA/PlyB and EqTs, as well as their toxicity.

Background: Osteoporosis and bone fractures affect health and quality of life. Since bone disease is multifactorial, identifying risk factors is key in prevention. There are multiple reports on how viral hepatitis especially chronic hepatitis B (CHB) and chronic hepatitis C (CHC) are affecting bone disease, but results vary. Here, we analyzed the potential association between CHB/CHC and osteoporosis or bone fractures in a large outpatient cohort in Germany. Methods: We included 3,136 outpatients with CHB and 15,608 matched non-hepatitis individuals as well as 2,867 outpatients with CHC and 14,335 matched non-hepatitis individuals from the Disease Analyzer Database between 2005 and 2022. The main outcome was the 5-year cumulative incidence of osteoporosis and bone fractures as a function of either CHB or CHC. Results: Within 5 years of the index date, 2.9% vs. 1.6% of patients with and without CHB were diagnosed with osteoporosis (p=0.001) and 1.0% vs. 0.4% were diagnosed with bone fractures (p<0.001). Moreover, 3.3% of CHC patients and 2.2% of individuals without hepatitis were diagnosed with osteoporosis (p=0.002). In Cox-regression analyses, CHB was significantly associated with an increased risk for osteoporosis (HR: 1.76) and fractures (HR:2.43) and CHC with osteoporosis (HR: 1.54). For both CHB and CHC, the association with osteoporosis was restricted to the female subgroup. Conclusion: CHB and CHC are associated with osteoporosis in women. CHB in male patients is associated with a higher risk of fractures. More research is are needed to understand the underlying pathophysiological mechanisms.

Viruses can induce the fusion of infected and neighboring cells, leading to the formation of syncytia. Cell-cell fusion is mediated by viral fusion proteins on the plasma membrane of infected cells that interact with cellular receptors on neighboring cells. Viruses use this mechanism to spread rapidly to adjacent cells or escape host immunity. For some viruses, syncytium formation is a hallmark of infection and a known pathogenicity factor. For others, the role of syncytium formation in viral dissemination and pathogenicity remains poorly understood. Human cytomegalovirus (HCMV) is an important cause of morbidity and mortality in transplant patients and the leading cause of congenital infections. Clinical HCMV isolates have broad cell tropism but differ in their ability to induce cell-cell fusions, and little is known about the molecular determinants. We developed a system to analyze HCMV glycoprotein B (gB) variants in a defined genetic background. HCMV strains TB40/E and TR were used as vectors to compare the fusogenicity of six gB variants from congenitally infected fetuses with those from three laboratory strains. Five of them conferred the ability to induce fusion of MRC-5 human embryonic lung fibroblasts to one or both backbone strains, as determined by a split GFP-luciferase reporter system. The same gB variants were not sufficient to induce syncytia in infected ARPE-19 epithelial cells, suggesting that additional factors are involved. The system described here allows a systematic comparison of the fusogenicity of viral envelope glycoproteins and may help to clarify whether fusion-promoting variants are associated with increased pathogenicity.

Dengue virus is a global health problem most prevalent in tropical and subtropical regions. However, after the approval of two vaccines, Dengvaxia, TV003/TV005 of Takeda, for its prevention, problems were reported, like enhanced risks of infection or less efficiency of protection. Since then, more struggles have been in demand for the development of better vaccines. Here, we conducted a new design through an in-silico strategy. Initially, epitopes were chosen based on their antigenicity, immunogenicity, and binding affinity with MHC molecule, while excluded with allergenicity, toxicity and potential risk of antibody dependent enhancement. Subsequently, a core antigen was constructed with selected epitopes and linked with distinct adjuvant proteins to achieve three candidate vaccines, PSDV-1~3. PSDV-2 was chosen for further validation based on their advantage in physicochemical and structural properties. With a panel of simulations, this artificial protein showed tight binding with pattern recognition receptors, good stability, robust immune induction, and ultimately was confirmed as a high quality vaccine candidate. The plasmid for its recombinant expression was then designed accordingly. With our new design, one more choice was obtained for the effective protection from Dengue virus. Further experimental validations are still require to confirm it protection capacity and safety.

Background: Despite hearing aids adequately compensate for hearing loss, a substantial proportion of the population leave their hearing difficulties untreated. Even though this is a well-known clinical issue, the optimal approach to address this issue during the hearing rehabilitation process is still unclear. Purpose: The present study aims to characterise behavioural and neurophysiological auditory and cognitive processing skills in experienced hearing aid users versus those with normal hearing, aimed at providing clinicians with the evidence required to adequately manage the expectations of their clients, thus indirectly reinforcing hearing-aid adoption within the adult population with hearing loss. Research design: Behavioural tests included auditory, cognitive, and speech-in-noise tasks; and neurophysiological testing included cortical auditory evoked potentials evoked by a /da/ stimulus presented at 65 dB SPL. The tests were selected based on previous literature supporting specific speech-understanding skills. Study sample: Ten participants (7 female, 21—68 years) with bilateral, mild-moderate to moderately-severe sensorineural hearing loss (HL), and 10 with clinically normal hearing (NH, 8 female, 19—62 years) participated in the study. Data collection and analysis: Behavioural data was analysed using multivariate analysis of variance (MANOVA) and neurophysiological analysis used measurements such as independent t-test, time-frequency analysis and inter-trial phase coherence. Results: The NH and HL groups presented similar scores in all the behavioural tasks. Time-frequency analysis revealed a statistically significantly reduction in alpha (8–12 Hz) synchronisation at the centro-frontal electrodes in the HL group – a brain activity pattern that has been associated with listening effort, inhibition and selective attention. Conclusions and significance: Results support the conclusion that hearing aids are effective in compensating for the audibility of their users, enabling them to perform at similar levels than their normal-hearing peers. However, the reduced alpha synchronisation observed in the HL population indicates that adequate audibility does not extend to improved neural responses. Future studies need to investigate the induced activity in speech understanding paradigms to explore the auditory processing differences at cortical level. The results are only from a small sample size but the findings have the potential to support clinicians in managing adequately the expectations of their clients in regards the benefits of hearing aid technologies.

The immune system is central in controlling acute hepatitis B infection and in patients resolving chronic hepatitis B (CHB). Given that 221 million (75%) of CHB patients reside in low- and middle-income countries, developing a vaccine with therapeutic properties represents a rational and cost-effective approach more than a romantic endeavor. This review systematically analyses the critical variables related to the safety, efficacy, and effectiveness of CHB treatments. HeberNasvac's experience is revisited to address the challenges and potentialities of therapeutic vaccines, as well as the current roadblocks in research and development, registration, and large-scale implementation.

The main motive of this study was to find an auxiliary application of the discarded agricultural remnants and poultry waste. Rice straw and chicken feathers are disposed off as landfills or incinerated causing pollution and environmental threats after their primary consumption. In this study epoxy composites were made using varying proportions of these raw and alkali treated materials. Flexural strength of the composites decreased till 35% fiber loading, followed by an increase. Chicken feather composites showed increased impact strength with fiber addition. Alkali treatment improved the mechanical properties of rice straw composites. Alkali treated chicken feather composites showed better impact strength but no significant change in flexural strength. Hybrid composites explicated enhanced properties both before and after alkali treatment corroborating noteworthy interfacial adhesion and synergistic effect of these fibers as ascertained from SEM images. The study evinced a better option for averting environmental problems by recycling these disposed materials.

Toxin/antitoxin (TA) systems are used primarily to inhibit phage, reduce metabolic activity during stress, and maintain genetic elements. Given the extreme toxicity of some of the toxins of these TA systems, we were curious how the cell silences toxins, if the antitoxin is inactivated or when toxins are obtained without antitoxins via horizontal gene transfer. Here we find that the RalR (type I), MqsR (type II), GhoT (type V), and Hha (type VII) toxins are inactivated primarily by a mutation that inactivates the toxin promoter or via the chromosomal mutations iraM and mhpR.

The implementation of Emissions Trading System (ETS) poses significant challenges for the Indian maritime sector. This paper investigates the regulatory implications of ETS, focusing on how these regulations impact compliance and operational practices within the Indian shipping sector. It also analyzes the economic effects, including the financial burden and competitive dynamics faced by the Indian shipping companies in a global context. Additionally, the paper explores various adaptation strategies, emphasizing technological innovations and operational adjustments essential for navigating ETS requirements. By integrating recent industry data and case studies, this study offers a comprehensive overview of how the Indian shipping industry can effectively address the evolving regulatory landscape of ETS.

Lamin A, B and C, the nuclear intermediate-filament proteins, play a role in epigenetic regulation. While Lamin B is expressed in all nucleated cells studied, Lamin A/C are transcribed in most somatic cell types except mature B lymphocytes. Since Epstein-Barr virus (EBV), a human gammaherpesvirus, is associated with tumorigenic processes and is known to alter the epigenotype of its host cells, we studied the expression of the LMNA gene and its epigenetic marks in EBV-carrying human lymphoid cell lines. We observed a high lamin A/C mRNA and protein expression in EBV-immortalized lymphoblastoid cell lines (LCLs) and in group III Burkitt lymphoma (BL) lines where hypomethylated first exons were observed with activating histone marks. In most cell lines with low promoter activity a highly methylated first exon could be detected. Our data showed that methylation of the first exon of LMNA was associated with the downregulation of LMNA expression whereas euchromatic histone marks were enriched at active LMNA promoters in EBV-immortalized LCLs. These data suggest a role for viral latency products to activate LMNAp in EBV-infected latency type III B cells in vitro. Expression of lamin A/C may contribute to the establishment of activated B cell phenotype that needs further explorations.

The prevalence of hepatitis B and delta viruses (HBV/HDV) among people who use drugs (PWUD) remains largely unknown. In the context of one Philadelphia-based harm reduction organization (HRO), this study aimed to assess HBV/HDV prevalence and facilitate linkage to care. Participants completed a demographic HBV/HDV risk factor survey and were screened for HBV and reflexively for HDV if positive for HBV surface antigen or isolated core antibody. Fisher’s exact tests and regression were used to understand relationships between risks and HBV blood markers. Of the 498 participants, 126 (25.3%) were susceptible to HBV, 52.6% had been vaccinated against HBV, and 17.9% had recovered from a past infection. Eleven (2.2%) participants tested positive for isolated HBV core antibody, 10 (2.0%) for HBV surface antigen, and one (0.2%) for HDV antibody. History of incarceration was associated with current HBV infection, while transactional sex and experience of homelessness were predictive of previous exposure. This study found high rates of current and past HBV infection, and a 10% HBV/HDV co-infection rate. Despite availability of vaccine, one quarter of participants remained vulnerable to infection. Findings demonstrate the need to improve low-threshold HBV/HDV screening, vaccination, and linkage to care among PWUD. The study also identified gaps in the HBV/HDV care cascade, including lack of point-of-care diagnostics and lack of support for HROs to provide HBV services.

Designing high-voltage underground transmission lines poses complex challenges in heat management, trench optimization, and determining cable ampacity. This article introduces an innovative proposal that focuses on adjusting the dimensions of the thermal backfill as a primary strategy to enhance ampacity compared to the traditional approach of increasing the cross-sectional area of the cable core. The methodology employs a particle swarm optimization (PSO) technique with adaptive penalization, restart strategies, and parameter self-adaptation implemented in MATLAB. The objective of this approach is to provide more efficient solutions than traditional MATLAB PSO, demonstrating improved convergence and more accurate results with a success probability of 66.1\%. Although traditional PSO is 81\% faster, the proposed PSO stands out for its precision. Additionally, the incorporation of thermal backfill results in an 18.45\% increase in cable ampacity. Variations in the thermal resistivity of the soil, backfill, and ambient temperature are highlighted as sensitive factors affecting ampacity and backfill dimensions. This method is presented as a crucial tool in the early stages of the project and underground installation in operation with maximum ampacity, contributing to the continuous improvement of energy efficiency.

Clinical, pathological, and imaging evidence in multiple sclerosis (MS) shows that inflammation starts early and progresses with age. B cells play a central role in this process, contributing to cytokine production, defective regulatory functions, and abnormal immunoglobulin production, even in the central nervous system. Anti-CD20 (aCD20) therapies, which deplete CD20+ B cells, are effective for both relapsing-remitting (RR) and progressive-relapsing (PR) MS. While effective against MS symptoms and lesions detectable by magnetic resonance imaging, aCD20 therapies can reduce the immune response to COVID-19 vaccination. By using high-parameter flow cytometry, we examined the antigen-specific (Ag+) immune response six months post-third COVID-19 mRNA-vaccination in MS patients with RR and PR forms on aCD20 therapy. Despite lower Ag+ B cell responses and lower levels of anti-SARS-CoV2, both total and neutralizing antibodies, RR and PR patients developed strong Ag+ T cell responses. We observed similar percentages and numbers of Ag+ CD4+ T cells and high proportion of Ag+ CD8+ T cells, with slight differences in T cell phenotype and functionality, that however suggested the presence of differences in immune responses driven by age and disease severity.