Nowadays, digitalization present in all links of the product life cycle and within product design, packaging is a critical element, as it affects the customer’s purchase intention, and therefore, it is one of the most important spaces where to include techniques and methods based on Industry 4.0 that obtain results from the user and bring them closer to the process. The relationship between packaging and the expected quality and emotions of users is a topic that is addressed in the social axis of sustainability and involves an effort to strengthen the relationship with the user. This article studies the expected quality of nougat packaging in terms of shape and colour using ANOVA analysis. For this purpose, a survey was carried out among 122 participants in Spain and Mexico. The main conclusion is that a packaging with the combination of three shapes (rectangle, square and triangle) and colours (yellow, orange and red) enhances consumers’ emotions of admiration, satisfaction, pleasant surprise, attraction, fascination and joy.

Purpose To analyse diagnostic and therapeutic impact of molecular imaging TNM (miTNM) stage obtained with 18F-DCFPyL versus 18F-Fluorocholine in head to head comparison in biochemical recurrence (BCR) prostate cancer (PCa). Material and methods Patients with BCR PCa after radical treatment with previous 18F-Fluorocholine-PET/CT (negative or oligometastatic disease) were derived to 18F-DCFPyL-PET/CT. Patients were classified attending to: grade group, EAU classification, PSA, PSA doubling time (PSAdt) and PSA velocity (PSAvel). The overall detection rate (DR) and miTNM stage according to PROMISE criteria were assessed for both radiotracers and also correlation (Kappa). The influence of PSA and kinetics on both PET/CT (DR and miTNM) and predictive value of unfavourable kinetics on miTNM were determined. Cut-off PSA, PSAdt and PSAvel values able to predict PET/CT results were determined. Change in miTNM and treatment derived of 18F-DCFPyL information with respect to 18F-Fluorocholine was also evaluated. Results We studied 138 patients. 18F-DCFPyL showed a higher DR than 18F-Fluorocholine (64.5% vs 33.3%). 18F-DCFPyL and 18F-Fluorocholine detected T in 33.3% versus 19.6%, N in 27.5% versus 13.8%, M in 30.4% versus 8.7%. Both tracers DR showed significant associations with PSA and PSAvel. Significant association was only found between miTNM and PSA on 18F-Fluorocholine-PET/CT (p=0.033). For 18F-Fluorocholine and 18F-DCFPyL PET/CT a PSAdt cut-off of 4.09 and 5.59 months, respectively, were able to predict M stage. 18F-DCFPyL changed therapeutic management in 40/138 patients. Conclusion 18F-DCFPyL provides a higher DR and superior miTNM staging than 18F-Fluorocholine in restaging BCR, especially with high PSA and unfavourable PSA kinetics, showing a fair agreement to 18F-Fluorocholine.

This paper presents a mathematical modeling approach utilizing a fuzzy modeling framework for fixed wing aircraft systems with the goal of creating a highly desirable mathematical representation for model-based control design applications. The starting point is a mathematical model comprised of fifteen non-linear ordinary differential equations representing the dynamic and kinematic behavior applicable to a wide range of fixed wing aircraft systems. Here the proposed mathematical modeling framework is applied to the AIRBUS A310 model developed by ONERA. The proposed fuzzy modeling framework takes advantage of sector non-linearity techniquesto recast all the non-linear terms from the original model to a set of combined fuzzy rules. The result of this fuzzification is a more suitable mathematical description from the control system design point of view. Therefore, the combination of this fuzzy model and the wide range of control techniques available in the literature for such kind of models will enable us to avoid common control design methods, such as gain scheduling, where stability issues can be extremely challenging.

(1) Background: Foot strike pattern and cadence are two important variables that are related to sport performance and injury risks; the objective of this study is to analyse the foot strike pattern and cadence of the male elite athlete that participated in the Tokyo Olympic Games marathon. (2) Methods: Two independent researchers analysed the foot strike pattern of the first 51 participants in the 5km, and the cadence of the finalists in three different segments of the race. Descriptive statistics were presented for the main variables of this study. A repeated measures ANOVA was used to study the differences in cadence between different sections of the race (p<0.05). (3) Results: Average of the cadence of the eight finalists was 185.5 steps per minute (SD ± 5.1). No differences between sections of the race were found. The more most common foot strike pattern was midfoot strike pattern, followed by rearfoot strike pattern, and forefoot strike pattern. The results of cadence are in line with previous studies that analysed elite athletes, with the values being higher than other research involving recreational runners. (4) Conclusions: elite marathon runners mostly run with a running non-rearfoot strike pattern and a cadence of over 185 steps per minute.

Soot combustion experiments with 5%O2/He were conducted using model soot, and four distinct compositions of CexPr1-xO2-δ oxides were prepared, varying nominal cerium com-positions (x=0, 0.2, 0.3, and 1). The catalyst samples were comprehensively characterized using techniques such as XRD, Raman spectroscopy, HR-TEM, N2 adsorption at −196 °C, XPS, O2-TPD, H2-TPR, and work function measurements. The Pr-rich compositions, rang-ing from Ce0.3Pr0.7O2-δ to PrO2-δ, resulted in a significant increase in the total evolved O2 amounts and enhanced catalyst reducibility. However, a decrease in textural properties of the catalysts was noted, being particularly important for the pure praseodymia under the synthesis route conducted. The catalytic activity was investigated under two contact modes of mixing between soot and catalyst: loose and tight. The results revealed that the catalytic performance is associated with the surface contact in tight contact mode and with the combination of surface/subsurface/bulk oxygen mobility and the BET surface ar-ea in loose contact mode. Notably, the T10 and T50 parameters were achieved at much lower temperatures than the uncatalyzed soot combustion, even under loose contact conditions. Specifically, the 50% conversion was achieved at 511℃ and 538℃ for Ce0.3Pr0.7O2 and Ce0.2Pr0.8O2, respectively. While no direct correlation between catalytic activity and work function was observed a significant relationship emerges between work function values and the formation of oxy-gen vacancies, whatever the conditions used for these measurements. On the other hand, the ability to generate a high population of oxygen vacancies at low temperatures, rather than the direct activation of gas-phase O2, influences the catalytic performance of Pr-doped ceria catalysts, highlighting the importance of surface/subsurface oxygen vacancy generation, which was the parameter which showed better correlation with the catalytic activity, whatever the soot conversion value or the mode of contact considered.

Regionalization of food systems for shortening supply chains and developing local agriculture to feed city-regions presents particular challenges for food planning and policy. Existing foodshed approaches enable to assess the theoretical capacity of food self-sufficiency of a specific region, but they struggle to consider the diversity of existing crops in a way that could be usable for informing decisions and support urban food strategies. Most studies are based on the definition of the area required to meet local consumption, obtaining a map represented as an isotropic circle around the city, without considering the site-specific pedoclimatic, geographical and socio-economic conditions, which are essential for the development of local food supply chains. In this study we propose a first stage to fill this gap by combining the Metropolitan Foodshed and Self-sufficiency Scenario (MFSS) model, which already considers regional yields and specific land use covers, with spatially explicit data on cropping pattern, soil and topography. We use European-wide available data and apply the methodology in the city-region of Avignon (France), initially considering a foodshed with a radius of 30 Km. Our results show that even though a theoretical high potential self-sufficiency could be achieved for the whole food commodities consumed (>80%), when considering the specific pedological conditions of the area, this could be suitable only for domestic plant-based products, whereas for animal products an expansion of the initial foodshed to a radius of 100Km was required to provide >70% of self-sufficiency. We conclude that it is necessary to shift the analysis from the size assessment to the commodity-group specific spatial configuration of the foodshed based on biophysical and socio-economic features, and discuss avenues for further researches enabling to develop a foodshed assessment as a complex of complementary pieces: the foodshed archipelago.

The influence of the hot isostatic pressing (HIP) post-processing step on structural and phase changes, porosity healing and mechanical strength in a powder metallurgy Ti35Nb2Sn alloy was studied. Powders were pressed at room temperature at 750 MPa, and then sintered at 1,350°C in a vacuum for 3 h. The standard HIP process at 1,200°C and 150 MPa for 3 h was performed to study its effect on a Ti35Nb2Sn powder metallurgy alloy. The influence of the HIP process and cold rate on density, microstructure, the quantity of interstitial elements, mechanical strength and Young's modulus was investigated. HIP post-processing for 2 h at 1,200°C and 150 MPa led to greater porosity reduction and a marked retention of the β phase at room temperature. The slow cooling rate during the HIP process affected phase stability, with a large amount of α”-phase precipitate, which decreased the titanium alloy’s yield strength.

Brushless Synchronous Machines (BSM) are replacing conventional synchronous machines with static excitation in generation facilities due to the absence of sparking and lower maintenance. However, this excitation system makes challenging measuring electric parameters in the rotor. This fact highly difficult the detection of ground faults, which are the most common type of electrical fault in electric machines. In this paper, a ground fault detection method for BSM is proposed. It is based on an inductive AC/DC rotating current sensor installed in the shaft. In case of a ground fault in the rotating parts of the BSM, a fault current will flow through the rotor’s sensor, inducing voltage in its stator. Analyzing the frequency components of the induced voltage the detection of a ground fault in the rotating elements is possible. The ground faults detection method proposed covers the whole rotor and discern between DC and AC sides. To corroborate the detection method, experimental tests have been performed using a prototype of this sensor connected to laboratory synchronous machines achieving satisfactory results.

Classic mitochondrial DNA phylogenetic and phylogeographic studies on the aboriginal, historical, and extant human populations of the Canary Islands have contributed to reconstructing the origin and settlement on the islands of the pre-European colonizers. The recent use of new ancient DNA targeted enrichment and next-generation sequencing techniques on new Canary Islands samples has greatly improved these molecular results, but it has also revealed significant contamination in the islands' previous aboriginal genetic pool. Following a thorough review of these cases, new phylogeographic analysis revealed the existence of a heterogeneous aboriginal population, asymmetrically distributed across the various islands, and most likely descended from a unique main settlement. These new results and new proposed coalescent ages are compatible with a Roman-mediated arrival driven by the exploitation of the purple on the Canary Islands.

The study aimed to evaluate implant success and bone height variations after transcrestal sinus floor elevation (tSFE) using the osseodensification technique (OD) combined with beta-tricalcium phosphate (β-TCP), as bone graft material and simultaneous implant placement. Thirteen patients requiring the placement of one implant in the upper posterior maxilla, with a residual bone height of

The alcoholic fermentation process with agitation/static, followed by the acetic fermentation submerged in banana was evaluated. Kinetics parameters of alcoholic fermentation for the maximum ethanol/glycerol metabolites in agitated process was 29 and 27 h, and in static 47 and 45 h, respectively. For acetic fermentation, the kinetics parameters were medium time of 39.9 h, acetic acid yield of 53.1% and acetic acid productivity of 0.216 g/Lh. Wines from agitated/static process presented 5.73 and 6.81% (v/v) of alcohol content, respectively. Wine obtained by the static process presented higher concentrations of volatile compounds. The vinegar showed 49.2 g/L of acetic acid and the esters concentrations were higher than in wine. The wine and vinegar minerals were consistent with amount observed in the pulp, with an increase in sulphur concentration after alcoholic fermentation and decrease after acetic fermentation. Products showed chemical and composition of sensory and nutritional interest.

The conserved cyanobacterial protein PipX is part of a complex interaction network with regulators involved in essential processes that include metabolic homeostasis or ribosome assembly. Because PipX interactions depend on the relative levels of their different partners and of the effector molecules binding to them, in vivo studies are required to understand the physiological significance and contribution of environmental factors to regulation of PipX complexes. Here we have used the NanoBiT complementation system to analyse regulation of complex formation in Synechococcus elongatus between PipX and each of its two best characterized partners, PII and NtcA. Our results confirm previous in vitro analysis on regulation of PipX-PII and PipX-NtcA complexes by 2-oxoglutarate and on regulation of PipX-PII by the ATP/ADP ratio, showing the disruption of PipX-NtcA complexes by increased levels of ADP-bound PII in Synechococcus elongatus. The demonstration of a positive role of PII on PipX-NtcA complexes under the initial response to nitrogen starvation or the impact of a PipX point mutation on the activity of PipX-PII and PipX-NtcA reporters are further indications of the sensitivity of the system. This study reveals additional regulatory complexities in the PipX interaction network, opening the way to future research in cyanobacteria.

Plant DNA extraction techniques are well-established, featuring a variety of protocols tailored to the needs of individual laboratories or research goals. Currently, there is a strong demand for plant DNA extraction methods that are rapid, cost-effective, and uncomplicated. We have devised an optimized protocol for plant DNA extraction that eliminates the need for liquid nitrogen. DNA was extracted from leaves of Inga feuilleei (pacae) in the Cañete Valley using a basic cetyltrimethylammonium bromide method. Subsequently, the extracted DNA was quantified and assessed for quality through agarose gel electrophoresis. This protocol holds the potential to significantly reduce costs in laboratories engaged in routine DNA extraction for genetic diversity and gene expression analyses. It addresses challenges encountered by other conventional methods, particularly in situations where they have proven ineffective due to issues related to explant, sample conditions, and the quantity and quality of nucleic acids. This is especially pertinent for numerous laboratories in developing countries where constraints related to the cost and availability of liquid nitrogen may be a limiting factor. Furthermore, this is the first study reported in this species for genomic studies.

Ancient DNA has given a new vision to the recent history of human evolution. However, by always relying on the information provided by whole genome sequencing, some relevant relationships between modern humans and its archaic relatives have been misinterpreted by hybridization and recombination causes. In contrast, the congruent phylogeny, obtained from non-recombinant uniparental markers, indicates that humans and Neanderthals are sister subspecies, and that the most recent common ancestor of modern humans was not of African origin but Eurasian.

Yeast two-hybrid approaches, which are based on fusion proteins that must co-localise to the nucleus to reconstitute the transcriptional activity of GAL4 have greatly contributed to understand the nitrogen interaction network of cyanobacteria, whose main hubs are the trimeric PII and the monomeric PipX regulators. The bacterial two-hybrid system, based on the reconstitution in the E. coli cytoplasm of the adenylate cyclase of Bordetella pertussis, should provide a relatively faster and presumably more physiological assay for cyanobacterial proteins than the yeast system. Here we use the bacterial two-hybrid system to gain additional insights into the cyanobacterial PipX interaction network while simultaneously assessing the advantages and limitations of the two most popular two-hybrid systems. Comprehensive mutational analysis of PipX and bacterial two-hybrid assays were performed to compare outcomes between yeast and bacterial systems. We detected interactions previously recorded in the yeast two-hybrid system as negative as well as a “false positive”, the self-interaction of PipX, which is rather an indirect interaction dependent on PII homologs from the E. coli host, a result confirmed by Western analysis with relevant PipX variants. This is, to our knowledge, the first report of the molecular basis of a false positive in the bacterial two-hybrid system.

: Foodshed approaches allow the assessment of the theoretical food self-sufficiency capacity of a specific region based on biophysical conditions. Recent analyses show that the focus needs to be shifted from foodshed size portrayed as an isotropic circle to a commodity-group-specific spatial configuration of the foodshed that takes into account the socio-economic and biophysical conditions essential to the development of local food supply chains. We focus on a specific animal product (beef) and use an innovative modeling approach based on spatial analysis to detect the areas of the foodshed dedicated to beef feeding (forage, pasture, and grassland), considering the foodshed as a complex of complementary areas called an archipelago. We use available statistical data including a census to address the city-region of Avignon (France) covering a 100 km radius. Our results show that the factors driving the use of short supply chains for beef feeding areas are the foodshed archipelago’s number of patches, the connectivity between them, and the rugosity of the boundaries. In addition, our beef self-sufficiency assessment results differ depending on geographical context. For instance, being located within the perimeters of a nature park seems to help orient beef production towards short supply chains. We discuss possible leverage for public action to reconnect beef production areas to consumption areas (the city) via short supply chains (e.g. green, home-grown school food programs) so as to increase local food security through increased local food self-sufficiency.

The aim of this study was to analyze the level of specific back-health-related physical activity and exercise knowledge. This is a cross-sectional study. A representative sample of 1500 students were recruited with a confidence level of 95% and an accepted standard error of ±2.53%. Individuals were aged between 13 and 18 years old (mean age= 15.18; SD = ±1.446). Self-reported questionnaires were used to record back-health-related physical activity and exercise knowledge concerning back care in adolescents. The level of specific knowledge of back health education related to physical activity and exercise in adolescents was low (X = 2.05, SD = ±2.264). Only 10.9% of the students passed the specific knowledge test, achieving a grade equal or superior to 5. The boys average score was higher (X = 2.17, SD = ±2.312) than the girls (X = 1.94, SD = ±2.212) with statistically significant differences (p = .048). The level of specific knowledge increased with age (F = 11.531; p < .001). High school students have a low level of specific knowledge. Physical Education teachers should apply the conceptual content properly. Knowledge is the first step towards changing behavioral habits. Back care education in the school curriculum is recommended.

The unstable international economic situation is reflected in the supply chain stress, lack or increased cost of some raw materials, fuel or semi-finished products is forcing organizations to perform new optimization initiatives in the utilization of their equipment and assets pointed to obtain the maximum value from them, while maintaining and even improving the quality of their products. The achievement of these objectives involves the reduction or minimization of equipment downtime to maintain the advantage over their competitors and ensure the organization's competitiveness. The intelligent maintenance system (IMS) provides adequate support for decision-making related to equipment maintenance, since poor maintenance results in unplanned stoppages, with the consequent additional cost and increased customer dissatisfaction, and an over-maintenance can result in an additional labor cost, time and the replacement of parts that are in good conditions. The utilization of new tools and technologies introduced by Industry 4.0 offers multiple opportunities for enhancement through communication and computerized data processing, aiming to improve the maintainability of a hydrogen compressor using neural networks based on attention mechanisms combined with linear regression.

This study aims to examine the non-volatile Particle Number (PN) emissions of a retrofitted Heavy-Duty Spark-Ignition (HD-SI) engine powered by liquefied petroleum gas (LPG) under both steady-state and transient conditions. The engine was tested under seven steady-state operating points to investigate the PN behavior and Particle Size Distribution (PSD) upstream and down-stream of the Three-Way Catalyst (TWC). This analysis intends to assess the impact of including particles with diameters ranging from 10 nm to 23 nm in the total particle count, a consideration for future regulations. The study employed the World Harmonized Transient Cycle (WHTC) for transient conditions to encompass the same engine working region used in the steady-state analysis. A Dekati FPS-4000 diluted the exhaust sample to measure the PSD and PN for particle diameters between 5.6 nm and 560 nm using the TSI-Engine Exhaust Particle Sizer (EEPS) 3090. Findings indicate that PN levels tend to increase downstream of the TWC under steady-state conditions in operating points with low exhaust gas temperatures and flows (equal to or less than 500 °C and 120 kg/h). Furthermore, the inclusion of particles with diameters between 10 nm and 23 nm leads to an increase in PN emissions by 17.70% to 40.84% under steady conditions and by an average of 40.06% under transient conditions, compared to measurements that only consider particles larger than 23 nm. Notably, in transient conditions, most PN emissions occur during the final 600 seconds of the cycle, linked to the most intense phase of the WHTC.

In this research, the concept of the instability of tension in Microgrid still becomes the focus of study and purpose. Scrutinously, First-Swing Instability occurs in the system in noted changes with properties of making the system unstable or restore to a state of stability. The latter calls itself as a phenomenon of re-synchronization. Allied to aspects of system instability, it is evident that by connecting fast electric chargers for battery-electric vehicles to the distribution system from microgrids, they increase the necessary basic electrical charges and reduce the stability of the electrical energy system. Transient electrical currents have the characteristic of severely impacting microgrids not prepared in connected states or island of the main system. The occurrences of the electromagnetic incompatibility of the inrush current, due to their unpredictability and intermittent characteristic, have complex identification studies. With the elevation of electricity demand by battery-electric vehicle chargers, concerns about the effects of the integration of the electricity grid increase proportionally. The research described in this article emphasizes the influence of fast chargers’ initialization on the power variation related to the re-synchronization phenomenon and its mitigation of the stability of electricity microgrid. An optimization algorithm based on particle swarm optimization (PSO) implements the development of virtual impedances. The PSO optimization algorithm analyzes all possible operating points and aims to maximize the stability index of microgrid, maintaining reactive energy incompatibilities at the minimum level supported. The fractional objective function facilitates the service to these goals simultaneously. The optimization algorithm is implemented in a case study and the corresponding virtual impedance is incorporated into the microgrid. Voltage levels are verified as a condition in the optimization process, comparing system effectiveness.

In this paper we use the Mellin convolution theorem, which is related to Perron's formula. Also we introduce new explicit formulae for arithmetic function which generalize the explicit formulae of Weil for other arithmetic functions different from the Von-Mangoldt function.

The international literature shows a polarised debate on the impacts of climate change on migration. Some studies find a positive linkage, whereas others find a negative one. It is, without a doubt, a complex process better considered case-specific. There is no available information on the relationship between climate change and migration in Colombia, despite past research exploring each of these subjects independently. This study intends explicitly to investigate this linkage gap. Consequently, this paper's essential contribution is that it builds a bridge between climate change scenarios and migratory science for the first time in Colombia. Despite their limitations, the theoretical and methodological framework suggested by IOM (2009b pp. 86, Section B, Chapter II) is demonstrated in this study to be very valid since it provides a methodology to predict where future flows will occur (based on past evidence). The methodological approaches of SLA and NELM explained in section A in the IV Chapter are also valuable for analysing and approaching this study's conclusions. The primary conclusions of this study indicate that the "Coffee Region," Valle, and Atlantic (or Caribbean Coast) provinces that mainly send emigrants to Spain and the US are the key internal regions responsible for most of the international migration from Colombians. The same areas are especially vulnerable to the impacts of upcoming climate change in the A1B scenario produced by the IDEAM (2010) for 2040 and 2100. Thus, future flows of migrants are expected from these regions (2040-2100). However, issues such as visa requirements or the costs associated with migration constitute international barriers to this flow. The sensitivity of these regions can also be associated with internal migration flows, more armed conflict, and forced displacement in a cyclical process. Theoretically, a resurgence of Colombia's armed conflict and displacement due to climate change can be expected. However, the need for empirical studies in Colombia to support this analysis is imperative and is the most crucial recommendation arising from this study.

In this work, an embroidered textile moisture sensor is presented. The sensor is based on a capacitive interdigitated structure embroidered on a cotton substrate with an embroidery conductor yarn composed by 99% pure silver plated nylon yarn 140/17 dtex. In order to evaluate the sensor sensitivity, the impedance of the sensor has been measured by means of a LCR meter from 20 Hz to 20 kHz on a climatic chamber with a sweep of the relative humidity from 25% to 65% at 20 ºC. The experimental results show a clear and controllable dependence of the sensor impedance with the relative humidity. Moreover, the reproducibility of the sensor performance subject to the manufacturing process variability and washing process is also evaluated. The results show that the manufacturing variability introduce a moisture measurement error up to 4%. The washing process impact on the sensor behavior after applying the first washing cycle implies a sensitivity reduction higher than 14%. Despite these effect, the textile sensor keeps its functionality and can be reused in standard conditions. Therefore, these properties point out the usefulness of the proposed sensor to develop wearable applications on health and fitness scope including the user needs to have a life cycle longer than one-time use

This paper provides estimates of the elasticity of substitution between operational and managerial jobs in the US economy covering a period of almost five decades, derived from an aggregate CES production function. Estimating the long-term relationship between (the log of) the aggregate employment/self-employment ratio and (the log of) the returns from paid-employment relative to self-employment and testing for structural breaks, we report different estimates of the elasticity of substitution in each of the two regimes identified. Our results help to understand and interpret one of the most intriguing aspects in the evolution of self-employment rates in developed countries: the reversal of the trend in self-employment rates. Our estimates show that a higher level of development is associated with a greater number of entrepreneurs and smaller firms. Some rationales for understanding the growth of the elasticity between paid-employment and self-employment, including the recent trends in the digital economy—are also suggested.

Soil erosion seriously affects vineyards. In this study, the influence of two plant covers on soil moisture and the effect of different physiographic conditions on runoff and sediment yields were evaluated in a rainfed vineyard formed by four fields (NE Spain) during 15 months. One field had spontaneous vegetation as plant cover and three fields had a cover crop of common sainfoin. The vineyards’ rows were dry and stable, whereas the inter-row areas were wet although very variable, and the corridors were wet and very stable. Soil moisture in the inter-row areas with Common sainfoin was much higher than in the rows (62% - 70%) whereas this difference was lower with spontaneous vegetation (40%). Two runoff and sediment traps (STs) were installed in two ephemeral gullies, and 26 time-integrated surveys (TIS) done. The mean and maximum runoff yields were 9.8 and 30.7 l TIS^–1 in ST2 and 13.5 and 30.2 l TIS^–1 in ST3. The mean turbidity was 333 and 19 g l^–1, and the maximum sediment yields were 41,260 and 2,778 g TIS^–1 in ST2 and ST3. Changes in the canopy covers (grapevines and plant covers) and rainfall parameters explained the runoff and sediment dynamics.

This paper outlines the ongoing development of a specialised mobile application to address the mental health needs of vulnerable populations in the European Union (EU). Conducted as a mixed-methods research within two EU Science and Technology Cooperation Actions, the study prioritises stakeholder feedback to identify features for initial testing and strategies to improve application uptake, using critical digital health analysis. With a focus on marginalised groups such as refugees, migrants and socio-economically disadvantaged individuals, the application aims to provide an accessible and culturally sensitive platform for mental health support, integrating evidence-based interventions such as cognitive behavioural techniques and mindfulness exercises. Key features include multilingual support, habit tracking, personalised recommendations for support and services, and real-time crisis intervention. Collaboration with stakeholders and ongoing rigorous usability testing are driving the refinement process to ensure usability, acceptability and effectiveness, underscoring the importance of user engagement in technology-based mental health interventions in the EU context and highlighting the importance of collaborative science and technology for societal benefit.

Physical symptoms are defined as symptoms for which adequate examination does not reveal a sufficient underlying root cause, e.g., pain and fatigue. The extant literature of the neurobiological underpinnings of physical symptoms has been largely inconsistent and primarily consists of (clinical) case-control studies with relatively small samples sizes. Therefore, we studied the association of brain morphology with physical symptoms in pre-adolescents from two independent and population-based cohorts. This study included 2,683 individuals from the Generation R Study (51% girls, 10.1 ± 0.6 years old) and 10,567 pre-adolescents from the ABCD Study (48% girls, 9.9 ± 0.6 years old). High- resolution structural magnetic resonance imaging (MRI) was collected using 3-Tesla MRI systems. Physical symptoms were evaluated using the somatic complaints syndrome scale from the parent-reported school-age version of the Child Behavior Checklist. Linear regression models were fitted for global brain metrics (i.e., cortical and subcortical grey matter volume and total white matter volume) as well as surface-based vertex-wise measures (surface area and cortical thickness). Analyses were initially conducted separately in each cohort and later meta-analysed. No associations were observed in either cohort separately. In the combined vertex-wise meta-analysis of both cohorts; the right hemisphere surface area, most notably the rostral middle frontal gyrus, superior frontal gyrus and anterior cingulate cortex, were related to physical symptoms after correcting for multiple comparisons (cluster area = 1,882 mm2). The present study, which is the most representative and well-powered to date, suggests that surface area, but not other measures of brain morphology, are modestly related to physical symptoms in pre- adolescents. While these effects are subtle, future longitudinal research is warranted to elucidate whether such associations indicate a cause or a consequence of the physical symptoms.

Recently Palle has investigated the chiral vorticity and Cartan torsion in neutrino asymmetries. In his case he addressed this problem in Goedel s like anisotropic Einstein-Catan cosmology. In this paper we discusse how these ideas applied to sheared Bianchi types I Einstein-Cartan (EC) neutrino amisotropic cosmology, affect the handness of neutrinos in the universe. Actually here a novel concept of the chiral metric is introduced where metric functions also possess two distinct signs as in neutrino flipping or helicity. The axial anomaly equation for neutrinos in the presence of torsion and metric chirality is shown to produce left-handed neutrinos from right-handed torsion. Metric chirality is shown to be able to define how the metric would behave far away of neutrino density. Chiral flipping of the chiral neutrinos in the presence of torsion is also investigated. It is shown that when the chiral torsion is left-handed the chemical chiral potential vanishes as the universe expands.

Abstract: The objective of this meta-analysis was to evaluate the factors associated with mortality of elderly Italians diagnosed with the new coronavirus who resided in institutions or who were hospitalized as a result of the disease. Methods: A systematic review following the recommenda-tions of The Joanna Briggs Institute (JBI), where the PEO strategy was utilized - Population, Exposure and Outcome. P, being the elderly over 65 years old. E, the SARS-CoV_2 pandemic. O, mortality. The NCBI / PubMed, LILACS, EMBASE and CINAHL databases were used until July 31, 2020.; Results: Five Italian studies were included in the meta-analysis, with the number of elderly people varying between 18 and 1591 patients. The main morbidities presented by the elderly in the studies were: dementia, diabetes, chronic kidney disease and hypertension. Conclusions: The factors as-sociated with the mortality of elderly Italian people diagnosed with SARS-CoV-2 who lived in in-stitutions or who were hospitalized because of the disease were evaluated. It was found that de-mentia, diabetes, chronic kidney disease and hypertension are the main the main diagnosed dis-eases for mortality in elderly people with Covid-19.

children is challenging. An important advance is the 15-questions Pictorial Personality Traits Questionnaire for Children. A study on students from 10 to 13 years old in Poland validated the questionnaire but with some observations. Thus, there is a need for replication and stronger evi-dence in this age group. In Chile, we replicated the study with 3,423 4th-graders (9 to 12 years old). Teachers, in regular sessions, applied the questionnaire to their entire classes. We found similar results, including that asexual pictograms worked well in both genders. We also found positive relationships between conscientiousness, openness, and extraversion with mathematical performance. Furthermore, a combination of these three traits has a relationship with math performance twice as big as each trait alone. Moreover, students with the lowest scores in this combination of personality traits (6.6% of students) have 0.27 standard deviations less in mathematical performance than those with the highest score, which is 74.3% of students. To the best of our knowledge, this is the first time that a study finds a strong relationship between a combination of personality traits gathered with a 15-question questionnaire and fourth-graders´ math perfor-mances.

The infodiet of young Spanish adults aged 18 to 25 was analysed to determine their attitude towards fake news. The objectives were: to establish whether they have received any training in fake news; to determine whether they know how to identify fake information; and to investigate whether they spread it. The study employed a descriptive quantitative method consisting of a survey of 500 representative interviews of the Spanish population aged between 18 and 25 through a structured questionnaire. The results indicate that they are aware of the importance of training, although generally they do not know of any course and when they do, they do not tend to enrol on one either due to lack of interest or time. These young adults feel that they know how to identify fake content and, moreover, that they know how to do so very well. However, they do not use the best tools. While they do not always verify information, they mainly suspect the credibility of information when it is meaningless. However, they do not tend to spread fake information. We conclude that media information literacy training (MILT) is necessary in educational centres that focuses on the main issues identified.

High-resolution GPS/GSM dataloggers provide spatial information of the highest quality, which outperform previous tracking methods, such as Argos telemetry or conventional VHF ground-tracking. As a result, this has improved our knowledge of home-range behavior and spatial ecology of many species, including large raptors. In this paper, we use high-resolution GPS/GSM dataloggers to assess the home-range size and the role of sex, season (breeding or non-breeding season), and breeding status (reproductive or non-reproductive individuals) on the space use of Bonelli’s eagle (Aquila fasciata). To this end, 51 territorial individuals (25 females and 26 males) were equipped with GPS/GSM transmitters and were tracked over 7 years (2015–2021) in eastern Spain. Overall, we recorded 4,791,080 fixes that were analyzed through kernel density methods (50%, 75%, and 95% fixed kernels). The average individual home-range size according to the 95%, 75%, and 50% kernels was 54.84 ± 20.78 km², 24.30 ± 10.18 km², and 11.17 ± 4.90 km², respectively. Overall, the home-range size of individuals occupying the same territory was similar, mainly due to the cooperative hunting behavior exhibited by the species. We did not find interannual differences in the home-range size (95% fixed kernel) of the majority of individuals, showing a strong territorial fidelity of the breeding pairs. In general, females’ home-range size was slightly smaller than males’ size due to the decrease in activity in the breeding season as a result of laying, incubation, and chick attendance at nests. No seasonal variation in the 95% kernel was found, but it was found in the 75% and 50% kernels. In regard to the breeding status, higher home-range size was recorded in the non-reproductive individuals. Moreover, we found a low neighbor overlap among the territories (4.18% ± 3.06%), which evidences a high level of intraspecific competition in the Bonelli’s eagle. Finally, this study highlights the advantages of the use of accurate telemetry information to improve our understanding of the spatial ecology of the endangered Bonelli’s eagle, which ultimately will serve to better inform management actions for its conservation.

Abstract Psychiatric care in Spain has experienced relevant changes both in the legislative and conceptual frameworks. This new approach advocates for the combination of carrying out mental health promotion, prevention of alterations and early diagnosis and treatment, enhancing actions against stigma and emphasising the attention on the most vulnerable groups, like childhood and youth. For that, it has seen fit to perform a nursing intervention on Education and Promotion of mental health for teachers and counsellors of a secondary school located in Valencia, with the general objective of assessing their impact on stigma. Non-randomised clinical trial in which a nursing intervention on Education and Promotion of mental health was performed. Pre-intervention tools: multiple choice test validated by a group of experts; pre and post-intervention: AQ-27 (stigma attribution); in order to check its acceptance, satisfaction surveys were used. The inferential analysis included the Wilcoxon Test (pre and post AQ-27) and the Pearson Correlation Test for the quantitative variables of interest. Sample (n=22): women aged 47.96 ± 10.12 years with 18.64 ± 10.34 years of work experience. The predominant stigmatising attitude before and after intervention was “Coercion”. The ones with lower score were “Segregation” and “Anger”. The p-values obtained in the Wilcoxon Test were statistically significant (p-value <0.05) except for “pre and post Responsibility” and “pre and post Pity”. The following constructs of interest were faced: “Age” vs “Fear” (r= -0.48, moderate), “Professional experience” and “Fear” (r= -0.46, moderate) and “Help” and “Psychosis test” (r= 0.51, severe). The overall satisfaction score was 9/10. Despite the scores obtained in “Coercion” and “Psychosis”, the intervention was useful for reducing stigma in the sample.

Residential dust is recognized as a major source of environmental contaminants, including polycyclic aromatic hydrocarbons (PAHs) and phthalic acid esters (PAEs). To characterize the thoracic dust fraction (PM10), a sampling campaign was carried out with an in-situ resuspension chamber in three rooms (kitchen, living room and bedroom) of four Spanish houses. Two samples per room were collected with, at least, a one-week interval. The PM₁₀ samples were analyzed for their carbonaceous content by a thermo-optical technique and, after solvent extraction, for 20 PAHs, 8 phthalate plasticizers (PAEs) and one non-phthalate plasticizer (DEHA) by gas chromatography-mass spectrometry. In general, higher dust loads were observed for parquet flooring compared with tile. The highest dust loads were obtained for rugs. Total carbon accounted for 9.3 to 51%wt of the PM₁₀ mass. Plasticizer mass fractions varied from 5 µg g-1 to 17 mg g^-1 PM₁₀, whereas lower contributions were registered for PAHs (0.98–116 µg g^-1). The plasticizer and PAH daily intakes for children and adults via dust ingestion were estimated to be 3–4 orders of magnitude higher than those via inhalation and dermal contact. Potential carcinogenic and negligible non-carcinogenic risks arising from exposure to PAHs were found.

Considering the importance of assessing the impacts resulting from a sport career, this study aimed at developing and validating a semi-structure interview guide suitable for quantifying the socio-demographic and epidemiological profile of former professional football players. Based on the theoretical frameworks and several methodological procedures, an interview guide was de-veloped, consisting of 3 areas of conceptual organization (A1. Biographical data; A2. Career data; and A3. Post-Career Transition data) and 8 data collection categories (C1. Personal data; C2. Pro-fessional data; C3. Socio-demographic pathway in the post-career; epidemiological pathway; C4. Epidemiological pathway; C5. Moment of leaving the career; C6. Socio-demographic pathway in post-career; C7. Epidemiological pathway in the post-career; and C8. Perceptions on post-career planning). The construction and validation of the interview guide following 4 steps: Ad hoc con-struction of the interview guide (step 1); Review of the interview guide by a panel of experts (step 2); Definition of procedures and protocol for the application of the interview (step 3); Application of the pilot study for face validation of the interview guide (step 4). Thus, in procedural terms, four stages were considered for the construction and validation of the interview guide, namely the Ad hoc construction of the interview guide (i), the review of the in-terview guide by a panel of experts (ii), definition of procedures and protocol for the application of the interview (iii), and the application of the pilot study for the face validation of the interview guide (iv). The results showed that the interview guide for the study of the impacts of the sports careers on the quality of life of Portuguese former football players shows reliability for the collec-tion of qualitative and quantitative information from the respective content analysis. The use of the interview guide characterizes the path of former player, providing information and knowledge on the socio-demographic and epidemiological impact factors resulting from their post-career (sports retirement).

An accurate, economical, and reliable device for detecting falls in persons ambulating with the assistance of an orthopedic walker is crucially important for the elderly and patients with limited mobility. Existing wearable devices such as wristbands are not designed for walker users, and patients may not wear them at all times. This research proposes a novel idea of attaching an internet-of-things (IoT) device with an inertial measurement unit (IMU) sensor directly to an orthopedic walker to perform real-time fall detection as well as activity logging. A dataset is collected and labeled for walker users in four activities, including idle, motion, step, and fall. Classic machine learning algorithms are evaluated using the dataset by comparing their classification performance. Deep learning with convolutional neural network (CNN) is also explored. Furthermore, the hardware prototype is designed by integrating a low-power microcontroller for onboard machine learning, an IMU sensor, a rechargeable battery, and Bluetooth wireless connectivity. The research results show the promise of improved safety and well-being of walker users.

In this work, two embroidered textile moisture sensors are characterized with three different conductive yarns. The sensors are based on a capacitive interdigitated structure embroidered on a cotton substrate with an embroidered conductor yarn. The performance comparison of 3 different type of conductive yarns has been addressed. In order to evaluate the sensor sensitivity, the impedance of the sensor has been measured by means of a LCR meter from 20 Hz to 20 kHz on a climatic chamber with a sweep of the relative humidity from 30% to 65% at 20 ºC. The experimental results show a clear and controllable dependence of the sensor impedance with the relative humidity and the used conductor yarns. This dependence points out the optimum conductive yarn to be used to develop wearable applications for moisture measurement.

Coastal zones experience increasing climatic and human pressures, which lead to growing risks and tipping points (TPs) under future scenarios and natural resource scarcity. To avoid crossing TPs with irreversible coastal losses, this paper proposes the development of adaptation pathways based on advanced coastal oceanography and engineering knowledge that enables an objective assessment of evolving coastal risks. These pathways feature sequential interventions, combining conventional engineering works with nature-based solutions (NbS), steered by simulations and observations as a function of available coastal resources (space and sediment) and risks for infrastructure and socioeconomic assets. Such an adaptation has been developed for urban and peri-urban Mediterranean beaches, considering conventional coastal engineering together with NbS. Both types of interventions are assessed in terms of key physical variables, which serve to evaluate performance and estimate TPs. This analysis supports the new coastal protection and management plan promoted by the local government and the coastal adaptation plan of the central government. The approach and results illustrate the potential of adaptation pathways for beach sustainability, enhancing the compatibility between short/long-term coastal protection objectives under present/future climate and management scenarios. The adaptation pathways development underpins an increasing stakeholder cooperation to achieve shared decisions for coastal sustainability.

Millimeter wave antennas have significance for high-speed, high-capacity wireless communication, delivering substantial advantages and an array of applications. This literature review analyzes the historical development, assessment of performance, difficulties with design, and contemporary applications in telecommunications, radar systems, and imaging. It covers the development of technology, especially within the context of 5G and beyond, and focuses at several antenna designs that deal with technical issues including reduction and impedance matching. The review also studies the effect of design on efficiency and bandwidth, identifying research gaps and potential futures, notably in terms of 5G technology. The commitment to develop millimeter wave antenna technology for next-generation wireless networks is evident, underlining the need of continued research and development.

The Autopoiesis and Cognition Theory (ACT), by Maturana and Varela, based on the notions of Biological Closure and Structural Coupling, is a well-known theory on how to understand biological organization [1, 2, 3]. Although, for example, the Free Energy Principle framework evokes some entailments of autopoiesis in a more formal setting [4, 5]; and ACT has been used in many fields, its impact has been restricted because it lacks quantitative analysis. Here we present a theoretical framework grounded in accepted and well-developed ideas from Mathematics and Physics which advance the understanding of the Principles of Biological Organization under the guidance of Biological Closure and Structural Coupling. The disciplines of Differential Geometry/Topology, Mechanics and Complex Dynamical Systems provide a powerful, elegant, and well-established body of knowledge to support our Biological Organization Principles (BOP) framework. In particular, Stochastic Mechanics and KAM theory (from Kolmogorov, Arnold and Moser theorem) allow us to develop, using the notions of Biological Closure and Structural Coupling, a central core of BOP termed Dynamical Closure Mechanism. Under the proposed framework, a wide variety of bio- logical phenomena can be understood, shedding new light on biological explanations. However, an understanding of biological organization may require the re-evaluation of dogmas on how we think on biology as it seems inescapable that what is needed is an integration of analysis and notions derived from mathematics, physics, and biology to generate a new landscape of ideas.

The search for new food products that promote consumers health has always been of great interest. The dairy industry is perhaps the best example regarding the emergence of new products with claimed health benefits. Cheese whey (CW), the by-product resulting from cheese production, and second cheese whey (SCW), which is the by-product of whey cheese manufacture, have proven to be potential ingredients for the development of food products with improved nutritional characteristics and other functionalities. Nowadays, due to their nutritional quality, whey products have gained a prominent position among healthy food products. However, for long, CW and SCW were usually treated as waste or as animal feed. Due to their high organic content, these by-products can cause serious environmental problems if discarded without appropriate treatment. Small and medium size dairy companies do not have equipment and structure to process whey and second cheese whey. In these cases, generally, they are used for animal feed or discarded without an appropriate treatment, being the cause of several constraints. There are several studies regarding CW valorization and there is a wide range of whey products in the market. However, in the case of SCW remains a lack of studies regarding its nutritional and functional properties, as well as ways to reuse this by-product in order to create economic value and reduce environmental impacts associated to its disposal.

Additive manufacturing (AM) is a promising new technology that is having a very fast growth from home workshops to high-tech cutting-edge factories. As any manufacturing technique, adequate metrology services are needed to assure the quality of items manufactured by AM. One of the most widely used instruments to measure the characteristics of surfaces manufactured with AM is the confocal microscope. In this paper, authors present a whole calibration procedure for confocal microscopes designed to be implemented preferably in workshops or industrial environments rather than in research and development departments. Because of that, it is as simple as possible. The procedure is designed without forgetting any of the key aspects that need to be taken into account and based on classical reference material standards. These standards can be easily found in industrial dimensional laboratories and easily calibrated in accredited calibration laboratories.

Sword-duels are interesting, from a game-theoretical perspective, as they correspond to sudden-death interactions between players (i.e., defeat means removal from the game), and where victory/defeat depend on not just skill, but also luck. Analyzing probabilities of victory streaks, given a certain level of self and others' skill, is thus relevant for any application domain that can be modeled in the same way. This paper takes inspiration from Miyamoto Musashi, famously undefeated for 61 duels, and implements a Markov-chain Monte-Carlo simulation approach to evaluate this scenario. Results suggest that a 61 victory streak can be probabilistically observed when skill level is roughly 6.5 times that of the average duelist, and with 95\% confidence when skill level is roughly 1000 times that of the average duelist. More generally, this paper provides a method for determining chances of victory streaks in game-theoretical sudden-death encounters, when both "skill" and "luck" contribute to the outcome of the encounter. Specific scenarios can be modeled by modifying the utilized Markov chain and adjusting sampled distributions as required.

The prevalence of back pain (BP) among children and adolescents has increased over recent years. Some authors advocate promoting back-health education in the school setting. It is therefore important to adopt a uniform suite of assessment instruments to measure the various constructs. The present study aimed to perform a cultural adaptation of a validated measurement instrument (BackPEI), beginning with a translation and cultural adaptation phase, followed by a second phase to test reliability using a test-retest design. The translation and cross-cultural adaptation were performed based on the guidelines. Reliability was tested by applying the questionnaire to 224 secondary school students, at two different times with a 7-day interval between the tests. In general, the Spanish version presented adequate agreement for questions 1–20, with only question 9 achieving a low Kappa range of .312 [-.152- .189]. The question about pain intensity did not show differences between the averages for the test (4.72 ± 2.33) and re-test (4.58 ± 2.37) (p = .333), and the responses for these two tests were highly correlated (ICC= .951 [.928- .966]; p= .0001). Psychometric testing indicated that the Spanish version of the BackPEI is well-adapted and reliable, based on the test-retest design, providing similar results to the original Brazilian version.

HIV/AIDS infection increases vulnerability to ill-health states and has a major impact on the general health status. This study aims to describe Angolan adolescents and adults’ comprehensive knowledge of HIV/AIDS and its associated factors based on the 2016 demographic and health survey (DHS). Data from 19,785 individuals between the ages of 15 and 49 years old, who re-sponded to all the DHS questions between October 2015 and March 2016 were included in this study. Multivariable analysis using logistic regression was used to compute the adjusted odds ratio and respective 95% confidence intervals. In Angola, 47.7% of the respondents had general com-prehensive knowledge of HIV/AIDS. The odds of having comprehensive knowledge about HIV/AIDS were higher among individuals who watch television (aOR: 2.40; 95% CI: 2.11, 2.72) or read journals and magazines (aOR: 1.99; 95% CI: 1.72, 2.30) more than once a week and, people with primary or higher-level education (aOR: 1.83; 95% CI: 1.67, 2.00). Similarly, for people living in urban areas (aOR: 1.51; 95% CI: 1.34, 1.71). These results may reflect important inequities and can assist decision-makers in advocating to continue to invest in health literacy for HIV but also in the development of tailored interventions in this area.

Probabilistic latent semantic analysis is a statistical technique developed for information retrieval and spanned many fields. It yields intuitive and solid results. However, the rigidity of the assumptions and the iterative nature derived from the Expectation-maximization algorithm generate several problems, dividing detractors and enthusiasts. In this manuscript, we first describe the Probabilistic latent semantic analysis. After, we discuss reformulations that attempt to solve these problems. We pay special attention to the works relating Probabilistic latent semantic analysis and the Singular value decomposition Theorem. Also, Probabilistic latent semantic analysis can be the basis for other techniques, such as kernelization or probabilistic transfer learning, and those that extend the descriptive character of the Principal component analysis to an inferential tool and open a window of opportunities.

The use of Artificial Neural Networks (ANN) is a great contribution to medical studies since the application of forecasting concepts allows the analysis of future diseases propagations. In this context, this paper presents a study of the new coronavirus SARS-COV-2 with a focus on verifying the virus propagation associated with mitigation procedures and massive vaccination campaigns. There were proposed two methodologies to predict 28 days ahead the number of new cases, deaths, and ICU patients of five European countries: Portugal, France, Italy, United Kingdom, and Germany, and a case study of the results of massive immunization in Israel. The data input of cases, deaths, and daily ICU patients was normalized to reduce discrepant numbers due to the countries size, and the cumulative vaccination values by the percentage of population immunized, at least with one dose of vaccine. As a comparative criterion, the calculation of the mean absolute error (MAE) of all predictions presents the best methodology and targets other possibilities of use for the proposed method. The best architecture achieved a general MAE for the 1 to 28 days ahead forecast lower than 30 cases, 0,6 deaths and 2,5 ICU patients by million people.

In the field of robotics education, introductory courses would ideally utilize heavy industrial arms for hands-on learning. This would provide students with valuable experience in joint programming, which involves direct control of each joint motor in the arm to accomplish desired path planning and differential movements. This practice requires consideration of the physical dynamics of the arm. However, the use of heavy industrial arms has several drawbacks. They are large and expensive, require specialized maintenance, can pose safety risks, and they typically do not allow for direct control of the joint motors. One solution is to use a small, lightweight, toy-like arm. While these are cost-effective and provide direct access to the joint motors without posing safety risks, their lightweight construction means they exhibit minimal dynamic behavior, which limits their educational value. Another solution involves a robotic arm simulator that uses a virtual arm. However, a virtual arm doesn't offer the same level of hands-on engagement and excitement as a physical arm. We propose a hybrid solution that combines a small physical arm with a virtual arm. This approach provides students with the experience of working with an industrial arm, but without the associated difficulties. We demonstrate how this approach successfully improved the completion rate of joint programming assignments, offering a promising solution for practical robotics education.

Proteins and DNA exhibit key physical chemical properties that make them advantageous for building nanostructures with outstanding features. Both DNA and protein nanotechnology have growth notably and proved to be fertile disciplines. The combination of both types of nanotechnologies is helpful to overcome the individual weaknesses and limitations of each one, paving the way for the continuing diversification of the structural nanotechnologies. Recent studies have implemented a synergistic combination of both biomolecules to assemble unique and sophisticate protein-DNA nanostructures. These hybrid nanostructures are highly programmable and display remarkable features that create new opportunities to build in the nanoscale. This review focuses on the strategies deployed to create hybrid protein-DNA nanostructures. Here, we will discuss strategies such as polymerization, spatial directing and organizing, coating, rigidizing or folding DNA into particular shapes or moving parts. The enrichment of structural DNA nanotechnology by incorporating protein nanotechnology has been clearly demonstrated and still shows a large potential to create useful and advanced materials with cell-like properties or dynamic systems. It can be expected that structural protein-DNA nanotechnology will open new avenues in the fabrication of nano-assemblies with unique functional applications and enrich the toolbox of bionanotechnology.

Background: Ceftobiprole is a fifth-generation cephalosporin that has been approved in Europe solely for the treatment of community-acquired and nosocomial pneumonia. The objective was to analyze the use of ceftobiprole medocaril (Cefto-M) in Spanish clinical practice in patients with infection in hospital or outpatient parenteral antimicrobial therapy (OPAT). Methods: This retrospective, observational, multicenter study included patients treated from September 1, 2021 to December 31, 2022. Results: 249 individuals were enrolled, aged 66.6±15.4 years, 59.4% male, with Charlson index of 4 (IQR 2-6); 13.7% had COVID-19, and 4.8% were in intensive care unit (ICU). The most frequent type of infection was respiratory (55.8%), followed by skin and soft tissue infection (21.7%). Cefto-M was administered to 67.9% as empirical treatment, being in monotherapy for 7 days (5-10) in 53.8% of cases. The infection-related mortality was 11.2%.The highest mortality rates were for ventilator-associated pneumonia [40%], and infections due to methicillin-resistant S. aureus (20.8%) and Pseudomonas aeruginosa (16.1%). Mortality-related factors were age (OR: 1.1, 95%CI [1.04-1.16]), ICU admission (OR:42.02, 95%CI[4.49-393.4]), and sepsis/septic shock (OR:2.94, 95%CI [1.01-8.54]).Conclusions: In real life, Cefto-M is a safe antibiotic, with only half of prescriptions in respiratory infections, mainly administered as rescue therapy in pluripathological patients with severe infectious diseases.

Objectives: To assess the short-term impact of a single global stretching session on plantar pressures and lumbar range of motion (RoM) over one week in sedentary university students. Design: A randomised controlled trial with two parallel groups. Participants: Sixty-four university students were randomly assigned to a stretching group or control group. The stretching group received a single session of global stretching and the control group remained seated for the same length of time as the stretching session. Main outcome measures: Lumbar RoM and plantar pressures were assessed before, immediately after, 48 hours after, and 7 days after intervention. Results: Group-by-time interaction was significant for lumbar lateral flexion (p = 0.044), right maximal pressure (p = 0.003), left maximal pressure (p = 0.008), right mean pressure (p = 0.025), left mean pressure (p = 0.002), and maximal pressure minus mean pressure in right foot (p = 0.007). The model with plantar pressures showed a significant difference for group-by-time interaction (p = 0.010).Conclusion: Global stretching seems to counteract the ill-effects of prolonged sitting up to seven days with respect to plantar pressure in standing without improving lumbar ROM

Quantitative phase microscopy (QPM), a technique combining phase imaging and microscopy, enables visualization of the 3-D topography in reflective samples as well as the inner structure or refractive index distribution of transparent and translucent samples. However, as in conventional optical microscopy, QPM provides either a large field of view (FOV) or a high resolution but not both. Many approaches such as oblique illumination, structured illumination and speckle illumination have been proposed to improve the spatial resolution of phase microscopy by restricting other degrees of freedom (mostly time). Therefore, the space bandwidth product (SBP) of QPM becomes enlarged. This paper aims to provide an up-to-date review on the resolution enhancement approaches of QPM, discussing the pros and cons of each technique as well as the confusion on resolution definition claim on QPM and other coherent microscopy.

Summer annual species are the most widely grown crops in the Upper Midwest, but reliance on a summer annual system has led to excessive soil and nutrient loss when crops are not present. Integrating winter rye (Secale cereale L.), known for its hardiness and environmental benefits, into the rotation can address these issues. However, there's limited understanding of the phenotypic diversity in winter rye during key growth stages that overlap with the typical planting dates for corn (Zea mays L.), soybean [Glycine max (L.) Merr], and late-planted crops like dry bean (Phaseolus vulgaris L.). Thus, the objectives of this study were to evaluate changes in biomass accumulation and quality of winter rye and triticale (x Triticosecale Wittmack) cultivars at three growth stages. Twenty cultivars were assessed over the 2014-2015 and 2015-2016 growing seasons across three environments in Minnesota. Winter rye and triticale were harvested for biomass at the tillering, booting, and soft dough growth stages and rye biomass yield and quality [i.e., crude protein, neutral detergent fiber (NDF), and 48-hour digestibility (NDFD)] were determined following harvest. Overall, there was little variation in each parameter among the cultivars within a location and growth stage. NDFD had some variation at the soft dough stage where digestibility ranged from 273 to 324 g kg-1 at the Crookston site and 332 to 406 g kg-1 at the St. Paul site. The lack of difference between cultivars indicates a wide range of choice when selecting a winter rye cultivar.

Wireless Sensor Network (WSN) and the sensing devices are considered part of the core components of the Internet of Things (IoT). Hence, the modeling of IoT-WSNs is fundamental to having a better understanding, management, and deployment of this kind of technology. A fundamental issue in WSN is energy consumption due to the inherent limitations of this resource in the sensor devices. On the other hand, several issues arise in heterogeneous scenarios due to the coexistence of different sensor devices. Therefore, the modeling process becomes challenging and must consider the different transmission and operation cycles and modes that the transmission protocol implements to assure successful functioning in terms of transmission, synchronization, and energy savings. A duty-cycled MAC WSN protocol (PSA-MAC) has been modeled based on a pair of two-dimensional Discrete-Time Markov Chain (2D-DTMC), whose solution in terms of stationary probability distribution is used by expressions that have been derived to evaluate the energy consumption of sensor devices that could be used for WSN-based IoT applications. Analytical results of average energy consumption are obtained, where the synchronization, data, and sleep periods of a full transmission cycle are considered in a heterogeneous scenario with different node classes and priority assignments. Also, the normal and awake operation cycles are considered to assure synchronization and energy savings. Moreover, the transmission schemes of SPT (transmission of single packets) and APT (transmission of packets in aggregation) are also considered in the model. These results are validated through discrete event-based simulations, and the obtained results are accurate.

The strong couplings among ecological, economic, social and technological processes explains the complexification of human-made systems, and phenomena such as globalization, climate change, the increased urbanization and inequality of human societies, the power of information, and the COVID-19 syndemics. Among complexification’s essential features are non-decomposability, asynchronous behavior, components with many degrees of freedom, increased likelihood of catastrophic events, irreversibility, nonlinear phase spaces with immense combinatorial sizes, and the impossibility of long-term, detailed prediction. Sustainability for complex systems implies enough efficiency to explore and exploit their dynamic phase spaces and enough flexibility to coevolve with their environments. This in turn means solving intractable nonlinear semi-structured dynamic multi-objective optimization problems, with conflicting, incommensurable, non-cooperative objectives and purposes, under dynamic uncertainty, restricted access to materials, energy and information, and a given time horizon, aiming at enhancing the co-evolutionary power of the Biosphere and its human subsystems. Giving the high-stakes, the need for effective, efficient, diverse solutions, their local-global, present-future effects, and their unforeseen short, medium and long-term impacts, achieving sustainable complex systems implies the need for Sustainability-designed Universal Intelligent Agents, harnessing the strong functional coupling between human, artificial and nonhuman biological intelligence in a no-zero-sum game to achieve sustainability.

A nanostructured electrochemical bi-sensor system for analysis of milks has been developed using the Layer by Layer technique. The non-enzymatic sensor [CHI+IL/CuPcS]2, is a layered material containing a negative film of the anionic sulfonated copper phthalocyanine (CuPcS) acting as electrocatalytic material, and a cationic layer containing a mixture of an ionic liquid (IL) (1-butyl-3-methylimidazolium tetrafluoroborate) that enhances the conductivity and chitosan (CHI) that facilitates the enzyme immobilization. The biosensor ([CHI+IL/CuPcS]2-GAO) results from the immobilization of galactose oxidase on the top of the LbL layers. FTIR, UV-vis and AFM have confirmed the proposed structure and cyclic voltammetry has demonstrated the amplification caused by the combination of materials in the film. Sensors have been combined to form an electronic tongue for milk analysis. Principal Component Analysis has revealed the ability of the sensor system to discriminate between milk samples with different lactose content. Using PLS-1 calibration models, correlations have been found between the voltammetric signals and chemical parameters measured by classical methods. PLS-1 models provide excellent correlations with lactose content. Additional information about other components such as fats, proteins and acidity can also be obtained. The method developed is simple and the short response time permits its use in assaying milk samples on-line.

The COVID-19 pandemic has raised questions about the possible cross immunity resulting from common vaccination programs and SARS-CoV-2 infection. Therefore, the Spanish Obstetric Emergency group performed a multicenter prospective study on the vaccination status of Influenza and Tdap (diphtheria, tetanus and pertussis vaccine boost administered in adulthood) in consecutive cases of SARS-CoV-2 infection in a pregnancy cohort, in order to assess its possible association with the clinical presentation and severity of symptoms of SARS-CoV-2 infection, as well as to determine the factors that may affect vaccination adherence. 1,150 SARS-CoV-2 positive pregnant women from 78 Spanish hospitals were analyzed: 183 had not received either vaccine, 23 had been vaccinated for Influenza only, 529 for Tdap only and 415 received both vaccines. No association was observed between the vaccination status and the clinical presentation of SARS-CoV-2 infection and/or the severity of symptoms. However, a lower adherence to the administration of both vaccines was observed in the Latin-American subgroup. Based on the results above, we reinforce the importance of maternal vaccination programs in the actual pandemic. Health education campaigns should be specially targeted to groups less likely to participate in these programs, as well as for a future SARS-CoV-2 vaccination campaign.

ShK domain-containing proteins are peptides found in different parasitic and venomous organisms. From a previous transcriptomic dataset from Bursaphelenchus xylophilus, a plant-endoparasitic nematode that infects forest tree species, we identified 96 transcripts potentially as ShK domain-containing proteins with unknown function in the nematode genome. This study aimed to characterize and explore the functional role of genes encoding ShK domain-containing proteins in B. xylophilus biology. We selected and functionally analyzed nine candidate genes specific from B. xylophilus. In situ hybridization revealed expression of one B. xylophilus ShK in the pharyngeal gland cells, suggesting their delivery into host cells. Most of the transcripts are highly expressed during infection and showed a significant upregulation in response to peroxide products compared to the nematode catalase enzymes. We reported for the first time, the potential involvement of ShK domain genes in oxidative stress, suggesting that these proteins may have an important role protecting or modulating the reactive oxygen species (ROS) activity of the host plant during parasitism.

People with Down syndrome present cognitive difficulties that affect their reading skills. In this study we present results about the use of gestural interaction with Kinect sensor to improve the reading skills of students with Down syndrome. Following a case of study method for small samples with disabilities, measuring different variables related to reading skills in an experimental group and in a control group. We found improvements in the visual association, visual comprehension, sequential memory, and visual integration after this stimulation in the experimental group compared to the control group. Also, we found that the number of error and delay time of interaction decrease between sessions in the experimental group.

The purpose of this work is to define optimal growth conditions for batch culture of the cyanobacterium Arthrospira maxima and the microalgae Chlorella vulgaris, Isochrysis galbana and Nannochloropsis gaditana. Thus, we study the effect of three variables on algae growth: i.e., inoculum:culture medium ratio, light:darkness photoperiod and type of culture medium, including both synthetic media and wastewaters. The results showed that the initial inoculum volume did not affect the amount of biomass at the end of the growth (14 days), whereas an excess (18 h) or defect (6 h) in the number of hours of light is determinant for its development. The contribution of nutrients from different culture media modified the growth of the different species. A. maxima was favoured in seawater enriched with Guillard's F/2 as well as C. vulgaris and N. gaditana but in fresh water medium. I. galbana had the greatest growth in the marine environment enriched with Walne’s media. Nitrate was the limiting growth reagent at the end of the exponential phase of growth for C. vulgaris and N. gaditana, while iron was for A. maxima and I. galbana. All species demonstrated their capability to grow in effluents from a wastewater treatment plant and they efficiently consume nitrogen, especially the three microalgae species.

In this paper we try to demonstrate that the classical model of certainty factos for dealing with innacurate knowledge can be efficiently implemented in a quantum environment. For this, we assume that certainty factors are strongly correlated with the quantum probability. We first explore the certainty factors approach for inexact reasoning from a classical point of view. Next, we introduce some basic aspects of quantum computing, and we pay special attention to quantum rule-based systems. We then build a use case: an inferential network to be implemented in both, the classical approach and the corresponding quantum circuit. Both implementations have been used to compare the behavior of the classical and the quantum approaches when confronted with the same hypothetical case. We analyze three different situations: (1) Only Imprecision (which refers to inaccuracy in declarative knowledge or facts) is present in the use case, (2) Only Uncertainty (which refers to inaccuracy in procedural knowledge or rules) is present in the use case, and (3) Both Imprecision and Uncertainty are present in the use case. Finally, we analyze the results to reach a conclusion about the eventually intrinsic probabilistic nature of the certainty factors model and to pave the way for future quantum implementations of this method for handling inaccurate knowledge.

In this study, the physical properties of briquettes produced from two different biomass feedstocks (sawdust and date palm trunk) and different plastic wastes were investigated, without using any external binding agent. The biomass feedstocks were blended with different ratios of two WEEE plastics (halogen-free wire and print circuit boards (PCB)) and automotive shredder residues (ASR). The briquettes production is studied at different waste proportions (10-30%), pressures (22-67 MPa) and temperatures (room-130 ˚C). Physical properties as density and durability rating were measured, usually increasing with temperature. Palm trunk gave better results than sawdust in most cases, due to its moisture content and the extremely fine particles that are easily obtained.

MicroRNAs are small non-coding RNAs that are implicated in several physiological processes such as cell development, proliferation, differentiation, apoptosis, immune response and angiogenesis. In the last couple of decades, several studies on miRNA profiling in OSCC have tried to associate miRNAs with clinical characteristics such as relapse, metastasis, and survival, however, the results have been found to vary considerably, sometimes even being contradictory. The main objective of our study was to analyse and verify miRNA expression in oral squamous cell carcinoma in a Spanish population. Second, we attempted to associate the identified deregulated miRNAs with molecular pathways. 8 Oral Squamous Cell Carcinoma patients and 8 healthy control samples were analysed by a microarray Affymetrix® miRNA 4.1 array plate and validated with 8 more cases using RT-qPCR. Deregulated miRNAs were studied using Diana Tools miRPath 3.0 to associate miRNA targets with molecular pathways. Microarray analysis identified 80 deregulated miRNAs (35 over-expressed and 45 under-expressed). Only miR-497-5p and miR-4417 maintained its deregulated expression after validation with qPCR. Among the molecular pathways in which deregulated miRNAs could be implicated, the most statistically significant pathway was ‘proteoglycans in cancer’. No relationship was found between miR-497-5p or miR-4417 expression and clinical or pathological parameters except of nodular affectation (high miR-4417 expression in patients with nodular affectation, p = 0.035) and radiotherapy (diminished miR-497-5p expression in patients who needed radiotherapy, p = 0.05). We have verified the altered expression of miR-497-5p and miR-4417 in Oral Squamous Cell Carcinoma samples and related the deregulated miRNAs with the ‘proteoglycans in cancer’ pathway.

This work exclusively focuses on the assessment of the thermal performance of a multifunctional facade panel incorporating PCM in foam layers, recurring to a hot box heat flux meter method to determine the thermal transmittance (U-value). The experimental setup is based on the steady-state approach using climatic chambers, assuring a stable thermal environment. Even small fractions of PCM achieved a small reduction in thermal amplitude. Numerical simulations using Ansys Fluent were developed to evaluate the performance of PCM use over a wide range of temperature boundary conditions and operating modes. These numerical models were calibrated and validated using the results of experimental tests, achieving a correlation factor of 0.9674, thus accurately representing a real-world scenario. The decrement factor (f) was used to analyse the data. It was identified that the efficiency of the panel and size of the optimum region increased with the PCM fraction growth. The simulated behaviour was optimum when the input mean temperature is of 20 °C for a room temperature of between 18-20 °C. The results show the significant potential of the multi-layered panel and the thermal regulator effect of the PCM incorporated on indoor space temperature to reach good thermal comfort levels.

Plastid genomes are in general highly conserved given their slow evolutionary rate, thus large changes in their structure are unusual. However, when specific rearrangements are present, they are often phylogenetically informative. Asteraceae is a highly diverse family whose evolution is long driven by polyploidy (up to 48x) and hybridisation, both processes usually complicating systematic inferences. In this study, we have generated one of the most comprehensive plastome-based phylogenies of family Asteraceae, providing information about the structure, genetic diversity, and repeat composition of these sequences. By comparing the whole plastome sequences obtained, we confirmed the double inversion located in the long single copy region, for most of the species analysed (with the exception of basal tribes), a well-known feature for Asteraceae plastomes. We also show that genome size, gene order and gene content are highly conserved along the family. However, species representative of the basal subfamily Barnadesioideae -as well as in the sister family Calyceraceae - are lacking the pseudogene rps19 located in one inverted repeat. The phylogenomic analysis conducted here, based on 63 protein-coding genes, 30 transfer RNA genes and 21 ribosomal RNA genes from 36 species of Asteraceae, are overall consistent with the general consensus for the family’s phylogeny, while resolving the position of tribe Senecioneae and revealing some incongruences at tribe level between reconstructions based on nuclear and plastid DNA data.

The Canal of Aragon and Catalonia (CAC) is 134 km long and irrigates 105,000 ha (131 irrigation user communities) and it is own by the River Ebro’s Water Agency. The aqueducts are located between km 67 and 71 of the canal and were designed by the Civil Engineer Félix de los Ríos Martín in 1907. The cross-section of both aqueducts, Coll de Foix and Capedevila, was extended within the framework of the project by Fernando Hué Herrero in 1962 in order to reach design flows of 26.1 m3/s and 25.7 m3/s, respectively. The structural performance of the aqueducts has been satisfactory, nevertheless the hydraulic capacity has reduced over the years. As a result, the irrigation user communities have expressed the need to extend the cross-section of the aqueducts to meet the irrigation demands. Given the age of the structure and the different design considerations at the time, it is paramount to verify the structural reliability of the aqueducts in the new load configuration. Therefore, the objective of the paper is to present the structural safety analysis conducted and describe the new extended cross-section for both aqueducts (maintaining the original structural typology).

Intravitreal injection is the gold standard therapeutic option for posterior segment pathologies, and long-lasting release is necessary to avoid reinjections. There is no effective intravitreal treatment for glaucoma or other optic neuropathies in daily practice, nor is there a non-invasive method to monitor drug levels in the vitreous. Here we show that a glaucoma treatment combining a hypotensive and neuroprotective intravitreal formulation (IF) of brimonidine-Laponite (BRI/LAP) can be monitored non-invasively using vitreous imaging captured with optical coherence tomography (OCT) over 24 weeks of follow-up. Qualitative and quantitative characterization was achieved by analysing the changes in vitreous (VIT) signal intensity, expressed as a ratio of retinal pigment epithelium (RPE) intensity. Vitreous hyperreflective aggregates mixed in the vitreous and tended to settle on the retinal surface. Relative intensity and aggregate size progressively decreased over 24 weeks in treated rat eyes as the BRI/LAP IF degraded. VIT/RPE relative intensity and total aggregate area correlated with brimonidine levels measured in the eye. The OCT-derived VIT/RPE relative intensity may be a useful and objective marker for non-invasive monitoring of BRI/LAP IF.

In the field of forensic imaging, it is important to be able to extract a “camera fingerprint” from one or a small set of images known to have been taken by the same camera (image sensor). Ideally, that fingerprint would be used to identify an individual source camera. Camera fingerprint is based on certain kind of random noise present in all image sensors that is due to manufacturing imperfections and thus unique and impossible to avoid. PRNU (Photo-Response Non-Uniformity) has become the most widely used method for SCI (Source Camera Identification). In this paper, we design a set of “attacks” to a PRNU based SCI system and we measure the success of each method. We understand an attack method as any processing that alters minimally image quality and that is designed to fool PRNU detectors (or, generalizing, any camera fingerprint detector). The PRNU based SCI system was taken from an outstanding reference that is publicly available.

Top-down models are defined by hardware architects to provide information on the utilization of the different hardware components. The target is to isolate the users from the complexity of the hardware architecture while giving them insight into how efficiently the code is using the resources. In this paper, we explore the applicability of 4 top-down models defined for different hardware architectures powering state-of-the-art HPC clusters (Intel Skylake, Fujitsu A64FX, IBM Power9, and Huawei Kunpeng 920) and propose a model for AMD Zen 2. We study a parallel CFD code used for scientific production to compare these 5 Top-Down models. We evaluate the level of insight achieved, the clarity of the information, the ease of use, and the conclusions that each one allows us to reach.

A series of novel substituted isoxazolidine derivatives was synthesized through 1,3-dipolar cycloaddition reactions of α-aryl-N-methyl nitrones with various ethylene moieties, resulting in the formation of isoxazolidine derivatives. The structures of the synthesized compounds were characterized using spectroscopic methods. The [3+2] cycloaddition (32CA) reactions of α-aryl-N-methyl nitrones with diverse ethylene substituents were computed employing Density Functional Theory (DFT) at the B3LYP/6–31G(d) level, upgrading bond parameters. An investigation of the electron localization function (ELF) unveiled the zwitterionic nature of α-aryl-N-methyl nitrones, devoid of pseudoradical or carbenoid centers. Utilization of CDFT indices enabled the prediction of global electronic flux from the strongly nucleophilic α-aryl-N-methyl nitrones to the varied electrophilic ethylene functionalities. Molecular docking and molecular dynamics simulations were conducted on the isoxazolidine derivatives against the EGFR receptor (PDB: 4ZAU). In silico assessment of the synthesized isoxazolidines involved molecular docking, wherein the compound with the highest docking score was subjected to molecular dynamics simulations. Compound 11a, out of the thirty isoxazolidine derivatives, displayed the most substantial binding energy, yielding a g score of -6.57 kcal/mol. These observations highlighted the functional role of amide NH2 and NO2 in the binding process with the target protein, influencing its activity. Furthermore, prediction of ADME drug-likeness properties was performed to identify a suitable candidate.

There are different ways to analyse energy absorbance (EA) in the human auditory system. In previous research, we developed a complete finite element model (FEM) of the human auditory system. In this mentioned work, the external auditory canal (EAC), middle ear, and inner ear (spiral cochlea, vestibule, and semi-circular canals) were modelled based on human temporal bone histological sections. Multiple acoustic, structure and fluid-coupled analyses were conducted using the FEM to perform harmonic analyses in the 0.1–10 kHz range. Once the FEM had been validated with published experimental data, the FEM numerical results were used to calculate the EA or energy reflected (ER) by the tympanic membrane. This EA was also measured in clinical audiology tests which were used as a diagnostic parameter. A mathematical approach was developed to calculate the EA and ER, with numerical and experimental results showing adequate correlation up to 1 kHz. Another published FEM had adapted its boundary conditions to replicate experimental results. Here, we recalculated those numerical results by applying the natural boundary conditions of human hearing and found that the results almost totally agreed with our FEM. This boundary problem is frequent and problematic in experimental hearing test protocols: the more invasive they are, the more the results are affected. One of the main objectives of using FEMs is to explore how the experimental test conditions influence the results. Further work will still be required to uncover the relationship between the middle ear structure and EA to clarify how to best use FEMs. Moreover, the FEM boundary conditions must be more representative in future work to ensure their adequate interpretation.

Road dust resuspension, especially the particulate matter fraction below 10 µm (PM10), is one of the main air quality management challenges in Europe. Road dust samples were collected from representative streets (suburban and urban) of the city of Viana do Castelo, Portugal. PM10 emission factors (mg veh-1 km-1) ranging from 49 (asphalt) to 330 (cobble stone) were estimated by means of the United Stated Environmental Protection Agency method. Two road dust fractions (< 0.074 mm and from 0.0074 to 1 mm) were characterised for their geochemical, mineralogical and morphological properties. In urban streets, road dusts reveal the contribution from traffic emissions, with higher concentrations of e.g. Cu, Zn, and Pb. In the suburban area, agriculture practices likely contributed to As concentrations of 180 mg kg-1 in the finest road dust fraction. Samples are primarily composed of quartz, but also of muscovite, albite, kaolinite, microcline, Fe-enstatite, graphite and amorphous content. Particle morphology clearly shows the link with natural and traffic related materials, with well-formed minerals and irregular aggregates. The hazard quotient suggests a probability to induce non-carcinogenic adverse health effects in children by ingestion of Zr. Arsenic in the suburban street represents a human health risk of 1.58 x 10-4.

Abstract: Increasing physical activity (PA) and personal and social values are two of the greatest demands in the current educational system. This study examined the effect of a hybrid pro-gramme based on the Personal and Social Responsibility Model and Gamification. A total of 58 students (13.89 years old, SD = 1.14) in two groups (Experimental and Control) participated dur-ing a complete academic year. Motivation, physical activity and sedentary behaviour were as-sessed though questionnaires. Physical fitness was evaluated using previously validated field tests. The results showed significant differences over time between EG and CG in afterschool physical activity (APA) at the weekend (p = 0.003), sedentary time (p = 0.04) and speed-agility (p = 0.04). There were no significant differences in motivation. Regarding the intervention, speed-agility (p = 0.000), strength (p = 0.000), agility (p = 0.000), cardiorespiratory fitness (p = 0.001), APA-weekend (p = 0.000), APA-week (p= 0.000) and sedentary time (p = 0.000) increased signifi-cantly in the EG. Speed-agility (p = 0.000), APA-weekend (p = 0.03) and sedentary time (p = 0.008) increased in the CG. The use of this hybrid program can be useful to produced improvements in physical fitness, physical activity and sedentary hevaviours. The use of a hybrid program based on teaching personal and social responsibility and gamification strategies, produced improvements in physical fitness, physical activity and sedentary behavior, but not in motivation variables. Further research is demanded in order to contrast this relevant findings due to the potential drawbacks and diversity found in the scientific literature among model-based practice.

We compare the well known Rayleigh-Ritz variational method (RRVM) with a recently proposed approach based on supersymmetric quantum mechanics and the Gram-Schmidt orthogonalization method (SSQMGS). We apply both procedures to a particular class of double-well harmonic oscillators that had been conveniently chosen for the application of the latter approach. The RRVM eigenvalues converge smoothly from above providing much more accurate results with less computational effort. Present results show that the unproved SSQMGS upper bounds do not hold.

The literature, aimed at understanding the income-price elasticity of air passenger demand, bases its analysis on airport movement. The diversity of studies regarding the casualty between air transportation and economic growth are examples. Some studies covering this link, estimate the income-price relationship with the demand considering international traffic. Considering a domestic setting, where this traffic is significant in Brazil, studies related to remote regions are scarce, and the existing ones focus on governmental policies and subsidies. In addition, empirical studies on the theme consenter themselves in developed regions, such as Europe, North America, and Australia. For Brazil, where we find the Amazon region, there are no empirical researches. This paper analyses the price-income elasticity of the demand regarding domestic passengers in air links from remote cities of the Brazilian Amazon. This study uses panel data regression analysis method on a database of domestic scheduled flights of Brazil´s National Civil Aviation Agency. The results show that air passengers involving remote region flights present a lower sensitiveness regarding local income and airline´s price variations than those in flights among capitals. The higher difference is in income-elasticity of the remote city of origin, which is lower than that of the air traffic among capitals.

Transcriptional regulation constitutes a key step in gene expression regulation. Myocyte enhancer factor 2C (MEF2C) is a transcription factor of MADS box family involved in the early development of several cell types including muscle cells. Over the last decade a novel layer of complexity modulating gene regulation is emerging as non-coding RNAs have been identified, impacting in both transcriptional and post-transcriptional regulation. microRNAs represent the most studied and abundantly expressed subtype of small non-coding RNAs and their functional role have been widely documented. On the other hand, our knowledge on the transcriptional and post-transcriptional regulatory mechanisms that drive microRNA expression is still incipient. We recently demonstrated that MEF2C is able to transactive the long, but not short, regulatory element upstream of miR-23a-miR-27a-miR-24-2 transcriptional start site. However, MEF2C over-expression and silencing, respectively, displayed distinct effects on each of the miR-23a-miR-27a-miR-24-2 mature cluster members, without affecting pri-miRNA expression levels, supporting thus additional MEF2C-driven regulatory mechanisms. Within this study we demonstrated a complex post-transcriptional regulatory mechanisms directed by MEF2C in the regulation of miR-23a-miR-27a-miR-24-2 cluster members, distinctly involving different domains of the MEF2C transcription factor and the physical interaction with pre-miRNAs and RNA interacting proteins such as Ksrp, HnRNPa3 and Ddx17.

The Cobb angle is critical in assessing adolescent idiopathic scoliosis (AIS) patients. This study aimed to evaluate the error in selecting the cranial and caudal limit vertebrae on AIS digital X-rays of experienced and novice observers and its correlation with the error in measuring the Cobb angle and determining the length of the scoliotic curves. Using the TraumaMeter v.873 software, eight raters (four experienced and four novices) independently evaluated 68 scoliotic curves on 42 AIS X-rays across three sessions one month apart according to Hopkins’ criteria of absolute reliability. Two spine specialist experts using the Cobb method established the gold standard measurements. The percentage of error in the selection of the cranial vertebrae (the most-tilted vertebra above the apex) is higher than in the caudal vertebrae (the most-tilted vertebrae below the apex) (44.7%, CI95% 41.05-48.3 compared to 35%, CI95% 29.7-40.4). The error in the choice of the most tilted vertebrae, in number of vertebrae per scoliotic curve, was MBE (mean bias error) =0.45, CI95% 0.38-0.52 in the cranial and MBE=0.35, CI% 0.69-0.91 in the caudal. The percentage of errors in the choice of boundary vertebrae is lower for the experienced than for the novices, both in cranial and caudal. The experienced chose at least one boundary vertebrae incorrectly in 52% of the meas-urements and the novices in 65.1%. The error in the Cobb angle did not depend on the number of boundary vertebrae chosen incorrectly (r=0.198, p=0.111). Of the 50% of Cobb angle measurements closest to the actual value, 55.4% (454) were obtained by incorrectly selecting at least one boundary vertebra. There was a positive correlation (r=0.673, p=0.000) between the error in selecting the boundary vertebrae and the error in determining the length of the scoliotic curves. The error in quantifying the length of scoliotic curves was MBE=0.43, CI95% 0.35-0.51 vertebrae per curve. We can conclude that errors in selecting boundary vertebrae are common among experienced and novice observers, with a greater frequency of error in the cranial vertebrae. There is no correlation between the error in selecting the boundary vertebrae and the error in measuring the Cobb angle. Contrary to the consensus, the accuracy of determining the length of the scoliotic curve is limited by the Cobb method’s reliance on the correct selection of boundary vertebrae. Inappropriate choice of boundary vertebrae leads to an estimated error in determining the length of the scoliotic curves of 0.805 vertebrae for each boundary vertebra chosen incorrectly.

Abrstract: Bacillus spp. it is a genus that is used to biocontrol post-harvest diseases in various vegetables and fruits during transportation and storage. It suppresses the development of pathogens such as gray mold (Botrytis cinerea) in strawberry cultivation. In this work, the molecular characterization of Bacillus spp. species was carried out. in three cities in Peru: Huaura, Chanchamayo and Cañete. The samples were collected from rhizospheric soil from crop areas, subsequently processed for microbiological isolation, molecular analysis using the 16S rRNA gene and bioinformatic analysis. In total, 14 strains were obtained where they were identified with a minimum of 92.05% and a maximum of 100% similarity: 8 strains of Bacillus subtilis, 4 strains of Bacillus licheniformis, 1 strain of Bacillus paralicheniformis and 1 strain of Bacillus cereus, all the strains were related by constructing a phylogenetic tree.

A new layout optimization method for offshore wind farms is proposed to minimize power deficits due to wake effect. The main engine of the algorithm is a gradient-descent method, in which an analogy is established between power deficit and repulsive electrostatic potential energy. To achieve a maximum dispersion in the initial solution, throughout the optimization process, new turbines are included in the centre of the concession area, and quickly expand outward looking for areas with less potential, in turn pushing the previous ones. When the optimization process ends, to avoid local maximums, it enters into a process of suppression of the set of locations that cause the greatest potential (power deficit). Then, a potential map of the entire area is created and a greedy algorithm includes new turbines to complete the layout with the final number of turbines. To speed up the search process and the creation of the potential map, two simplifications have been validated and added: the spatial distribution of velocities has been converted into its equivalent with point symmetry; and, for turbines affected by multiple wakes, the power deficit has been calculated by using a linear aggregation of powers, instead of the usual linear (or quadratic) aggregation of speeds. Owing to this type of aggregation, the process is accelerated in a factor of 90.

The utilization of eco-fonts for office printing is a sustainable, “green” printing concept, which has obvious economic benefits. As a result, it has a significant effect on environmental sustainability. This practice's fundamental problem is the decreased quality of text printed using eco-fonts compared to those printed with regular fonts. The aim of this research is eco-font efficiency estimation, i.e. determination of toner usage reduction level of inkjet-printed documents typed with this font type, as well as estimation of the extent humans perceive differences between text printed with eco-font and the one printed by its “non-eco“ equivalent. Combining the instrumental measuring method and digital image analysis, it was found that this simple principle (eco-font utilization) enables substantial toner usage reduction for an inkjet printing system. At the same time, a visual test showed that the visual experience of text printed using eco-font was sufficient. In addition, awareness of the benefits that eco-font utilization brings, change users’ attitude towards eco-font quality. The concept of removing the black pixel from this commonly used Thai font has a great potential for the sustainability printing process, and this simple solution could be applied to other languages as part of the GIT campaign.

The spatial segregation is a characteristic of Latin American cities, resulting in distinct dynamics of social inclusion and exclusion at both spatial and identity levels. Then, specific green spaces may convert into appreciated and contested territories, where various actors negotiate their uses and regulations. Considering a case-study in a green icon of the metropolitan city of Santiago de Chile, the main objective of the present study was to describe and comprehend the uses and meanings of the Quebrada Macul park among different social groups over the past two decades. We employed qualitative methods including six in-depth interviews with key informants (social and ecological leaders, historical neighbors, and park workers), five participant observations in the park, and statistical analysis of visitors. Results reveal that (1) the transition of being a popularly used hill to a metropolitan park rises tensions between public and private statuses of place; (2) conflicts emerge regarding who uses the space and how, reflecting power dynamics among different social groups; (3) the park, beyond being a public space, holds significant identity value for its historical residents, both for those who fought for its recovery and those who have lived closely, so processes of forgetfulness might be resentful. We conclude on enduring meanings of the park associated with the struggle for the place among different groups, highlighting the role of memory for the social integration of groups among natural spaces.

The enzymatic activities of bacterial isolates have been widely studied, but a spatial distribution of this activity is rarely focused. New antibiotic-producing microorganisms can be discovered in a more efficient manner if spatial statistical techniques are applied to the distribution of the activity of bacterial isolates in different terrains. This study is focused to generate a series of maps illustrating the spatial distribution of different soil parameters and the inhibition against relative-safe pathogens (like Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, Salmonella, Pseudomonas fluorencens and Enterobacter cloacae) in an urban park in València (Spain). This spatial data has demonstrated a higher proportion of isolates was specifically allocated. This routine of data presentation is valuable for understanding bacterial population dynamics at a local level.

This paper presents a Multilayer Perceptron and Support Vector Machine algorithms approach to predict the number of COVID19 infections in different countries of America. It intends to serve as a tool for decision-making and tackling the pandemic that the world is currently facing. The models were trained and tested using open data from the European Union repository where a time series of confirmed contagious cases was modeled until May 25, 2020. The hyperparameters as number of neurons per layer were set up using a tabu list algorithm. The countries selected to carry out the study were Brazil, Chile, Colombia, Mexico, Peru and the United States. The metrics used are Pearson's correlation coefficient (CP), Mean Absolute Error (MAE), and Mean Percentage Error (MPE). For the testing stage we obtained the following results: Brazil, CP=0.65, MAE=2508 and MPE=17%; Chile, CP=0.64, MAE=504, MPE=16%; Colombia, CP=0.83, MAE=76, MPE=9%; Mexico, CP=0.77, MAE=231, MPE=9%; Peru, CP=0.76, MAE=686, MPE=18% and the United States of America, CP=0.93, MAE=799, MPE=4%. This resulted in powerful machine learning tools although it is necessary to use specific algorithms depending on the data and the stage of the country’s pandemic.

Migratory and local birds may disperse ticks and their associated pathogens. The aim of this study was to provide information regarding tick infesting birds in Asturias, region that accounts for most of the Lyme disease hospitalizations in Spain. From September 2021 and April 2023 trained and experienced bird- banders collected ticks from birds in six estuary and forest locations. A total of 1,698 birds (52 species, 38 genera and 26 families) were captured. A total 51 ticks (28 larvae, 20 nymphs and 3 females) were collected from 43 birds, belonging to three species: Ixodes ricinus (31), I. frontalis (18) and Haemaphysalis concinna (1). The average prevalence of tick infestation was 2.5% and the average tick burden was 1.2 ticks per host. The bird species Turdus merula, Parus major, Luscinia svecica and Anthus pratensis were among the most infested. Anaplasma phagocytophilum was detected from one Turdus merula. We have not detected B. burgdorferi s.l., Rickettsia spp., Coxiella burnetii or piroplasmids in any of the 51 analyzed ticks. The results of the study suggest low infestation rate in migratory/estuary birds and a higher rate in forest/sedentary ones. Despite this, the detection of pathogens, although with low prevalence, can pose a risk to public health.

Generative AI has gained enormous interest nowadays due to new applications like chatGPT, DALL E, Stable Difussion and Deep Fake. Particularly DALL E, Stable Difussion and others (Adobe Firefly, ImagineArt...) are able to create images from a text prompt and are also able to recreate real photographs. Due to this fact, intense research has arisen to create new image forensics applications able to distinguish between real captured images and videos and artificial ones. Detecting forgeries made with Deep Fake is one of the most researched issues. This paper is about another kind of forgery detection. The purpose of this research aims to detect photo realistic AI created images versus real photos coming from a physical camera. For this purpose, techniques that perform a pixel level feature extraction are used. First one is Photo Response Non-Uniformity (PRNU). PRNU is a special noise due to imperfections on the camera sensor that is used for source camera identification. The underlying idea is that AI images will have a different PRNU pattern. Second one is Error level analysis (ELA). This is other type of feature extraction traditionally used for detecting image editions. In fact, ELA is being used nowadays by photographers to detect manually AI created images. Both kinds of features are used to train Convolutional Neural Networks to differentiate between AI images and real photographs. Good results are obtained achieving accuracy rates over 95%. Both extraction methods are carefully assessed by computing precision/recall and F1-score measurements.

On February 28th, 2023, Spanish Royal Decree 150/2023 as published, approving the plans for the management of the maritime space of the five Spanish marine demarcations. This Royal Decree Law inaugurates the Planning of the Maritime Space in Spain. Terrestrial Space Planning is very advanced, both in the legislation and in the instruments that are enabled to organize this space, from the national scale to the municipal scale, passing through the regional, provincial, and supra-municipal scales. Naturally, both Planning must converge and thus speak of an Integrated Space Planning. In some of the countries that we can take as global references, this convergence in the form of integration is taking place. On the other hand, and within the context of climate change, coastal cities will be the most affected, both by the potential rise in sea level and by the increasingly continuous and greater extreme events. Integrated Space Planning is postulated as the most effective tool to carry out adequate territorial and urban planning of our coastal cities, as well as to analyse the influence and possible corrective measures to apply against the effects produced by climate change.

Weather-related risks in aviation are one of the main causes of accidents worldwide. This article aims to analyze aviation risks resulting from adverse weather conditions, using the case study of the Pucallpa accident that occurred on August 23, 2005, in eastern Peru. In this analysis, we have determined the relationship between meteorological information and aviation risks, presented a matrix of risks associated with the most predominant meteorological variables at Pucallpa airport, and drawn up three maps of meteorological risks indicating the month of the year in which their incidence is most relevant. Finally, we conclude that it is essential to emphasize the importance of considering the prevailing weather conditions at Pucallpa airport to help mitigate the potential risks that may occur during different phases of the flight.

Salinity is considered as one of the most important abiotic challenges that affect crop productivity. Plant hormones, including salicylic acid (SA), are key factors in the defence signalling output triggered during plant responses against environmental stresses. We have previously reported in peach a new SA biosynthetic pathway from mandelonitrile (MD), the molecule at the hub of the cyanogenic glucoside turnover in Prunus sp. In this work, we have studied whether this new SA biosynthetic pathway is also present in plum and the possible role this pathway plays in plant plasticity under salinity, focusing on the transgenic plum line J8-1, which displays stress tolerance via an enhanced antioxidant capacity. The SA biosynthesis from MD in non-transgenic and J8-1 micropropagated plum shoots was studied by metabolomics. Then the response of J8-1 to salt stress in presence of MD or Phe (MD precursor) was assayed by measuring: chlorophyll content and fluorescence parameters, stress related hormones, levels of non-enzymatic antioxidants, the expression of two genes coding redox-related proteins, and the content of soluble nutrients. The results from in vitro assays suggest that the SA synthesis from the MD pathway demonstrated in peach is not clearly present in plum, at least under in vitro conditions. Nevertheless, in J8-1 NaCl-stressed seedlings, an increase in SA was recorded as a result of the MD treatment, suggesting that MD could be involved in the SA biosynthesis under NaCl stress conditions in plum plants. We have also shown that the plum line J8-1 was tolerant to NaCl under greenhouse conditions, and this response was somewhat different in MD-treated plants. In that regards, the MD treatment produced an increase in SA, jasmonic acid (JA) and reduced ascorbate (ASC) contents as well as in the coefficient of non-photochemical quenching (qN) and the gene expression of Non-Expressor of Pathogenesis-Related 1 (NPR1) and thioredoxin H (TrxH) under salinity conditions, suggesting a crosstalk between different signalling pathways (NPR1/Trx and SA/JA) leading to salinity tolerance in the transgenic plum line J8-1.

In this study, we propose an augmentation method for machine learning based on relabeling data in caregiving and nursing staff indoor localization with Bluetooth Low Energy (BLE) technology. Indoor localization is used to monitor staff to patient assistance in caregiving and to gain insights into workload management. However, improving accuracy is challenging when there is a limited amount of sensor data available for training. In this paper, we propose a data augmentation method to reuse the Received Signal Strength (RSS) from different sensors by relabeling to the sensors with less samples resolving data imbalance. Standard deviation and Kullback-Leibler divergence between minority and majority class are used to measure signal pattern to find matching sensors to relabel. By matching sensors between classes, two variation of relabeling are implemented specifically full and partial matching. The performance is evaluated using real world dataset we collected for five days in a nursing care facility installed with 25 BLE beacons. Random Forest model is utilized for location recognition, and performance is compared using the weighted F1-score to account for class imbalance. By increasing the sensor data with our proposed relabeling method for data augmentation, we achieved higher minority class F1-score as compared to augmentation with Random Sampling, Synthetic Minority Oversampling Technique (SMOTE) and Adaptive Synthetic Sampling (ADASYN). Our proposed method utilizes collected sensor data by leveraging majority class samples. Full matching demonstrated a 6 to 8% improvement from the original baseline overall weighted F1-score.

Annually, an estimated 13-26 million newborns need respiratory support and 2-3 million newborns need extensive resuscitation, defined as chest compression and 100% oxygen with or without epinephrine in the delivery room. Despite such care, there is a high incidence of mortality and short-term neurologic morbidity. The poor prognosis associated with receiving chest compression alone or with medications in the delivery room raises questions as to whether improved cardiopulmonary resuscitation methods specifically tailored to the newborn could improve outcomes. This review discusses the current recommendations, mode of action, different compression to ventilation ratio, continuous chest compression with asynchronous ventilations, chest compression and sustained inflation optimal depth, and oxygen concentration during cardiopulmonary resuscitation.

In this paper, a new anode environmentally friendly for hydrogen production was developed based on 430 stainless steel with an electrodeposited cobalt layer. The novelty of this work is the cobalt source once the electrodeposition bath was obtained from recycling of spent Li-ion batteries cathode with composition LiCoO₂. The electrodeposited cobalt behaves as supercapacitor in KOH 1M. In the linear voltammetry in KOH 1M, when the overpotential reaches 370 mV, the anodic density current for 430 SS/Co is 19 mA cm⁻². Thus, the anode developed in this paper achieves the double of density current with half of production cost if compared with 316SS. Moreover the anode construction described in this paper is an excellent option for Li- ion battery recycling.

In this paper the application of recycled Li-ion batteries spent cathode (LIB-SC) combined with NaHCO₃/H₂O₂ system is presented for the first time in the literature as an alternative for degradation of potentially toxic organic molecules. The model pollutant choice was methylene blue molecule. The spent cathode composition corresponds to LiCoO₂, which was proved by the XRD and EDX. Regarding the decolorization of methylene blue solution, the addition of NaHCO₃ in comparison with only H₂O₂ reduces the complete decolorization time in 96%. This reduction occurs because the radical CO₃ is more stable than OH. In this way, the application the system proposed in this article is aimed at solving two major global problems: the disposal of cell phone batteries and the pollution of liquid effluents.

Linear alkylbenzene sulfonate (LAS) anionic surfactants are widely used, present in wastewater, and can be discharged causing environmental damage. Without considering biodegradation, sorption and desorption reactions play an important role and depend on the characteristics of the aquifer medium such as the content of organic matter and clay. These processes are modelled with PHREEQC using laboratory-obtained data on columns with an input LAS pulse. LAS adsorption and desorption step experiments carried out in sand columns were also modelled with this software and distribution constants were similar to those obtained for pulse. The values of the starting distribution constant provided by batch tests with sand and agricultural soil mixtures establish the maximum value that must be obtained for column modelling. Distribution constants from column experiments obtained by Freundlich and linear isotherms provided very similar results, the latter with more consistent achievement. The modelling results showed longer elution times in the case of the heavier homologues and with a higher percentage of agricultural soil, which would translate into the great persistence of these compounds in the environment. In the case of soil contamination with wastewater-containing surfactants, these results would allow the development of mitigation strategies for these environmental impacts.

In Tunisia, olive is the most cultivated fruit crop while in the north where rainfall exceeded 400mm.year-1, the olive growing area is in widely extension in marginal soil with high slope gradient. Thus, the inclusion of cover crops is a sustainable solution to increase the ecosystem productivity, improve the soil fertility and oil yields. But, in Tunisia a few study were investigated the effect of legumes cover crop on the olive productivity. Therefore, the aim of this study was to evaluate the short-term (two cropping seasons s 2021 and 2022) effects of different seeded cover crops and soil management practices on the cover crops and soil characteristics, as well as enzymes activities and related microbial diversity. Six intercropping were tested in rainfed olive orchards (cv.Chétoui): Spontaneous vegetation (Spont), Wheat, Vetch, Oat, Fenugreek, mixture Vetch-Oat and compared to control (3 periodic tillage/year without intercropping). During the first cropping season, cover crops were cut as animal feed and only residues were incorporated into the soil. While, during the second year, all cover crops biomass were incorporated into the soil. Results indicate that the dry biomass and carbon uptake were significantly higher in grasses species (Wheat and Oat). But, highest level of nitrogen was found in Fenugreek cover crops. As compared to control, all cover crops including spontaneous vegetation increased soil organic matter and macronutrient level, mainly phosphorus. The most activity of β-glucosidase, phosphatase and arysulphatase was found in the cover crops plot of wheat and oat. In addition, this study improve that the utilization of the carbon sources was dominated by amides, amine and amino-acids in the fenugreek plot; while it was dominated by polymers and carboxylic acids in the case of wheat and oat.

This paper investigates the effects of air void topology on hydraulic conductivity in asphalt mixtures with porosity in the range 14%-31%. Virtual asphalt pore networks were generated using the Intersected Stacked Air voids (ISA) method, with its parameters being automatically adjusted by the means of a differential evolution optimisation algorithm, and then 3D printed using transparent resin. Permeability tests were conducted on the resin samples to understand the effects of pore topology on hydraulic conductivity. Moreover, the pore networks generated virtually were compared to real asphalt pore networks captured via X-ray Computed Tomography (CT) scans. The optimised ISA method was able to generate realistic 3D pore networks corresponding to those seen in asphalt mixtures in term of visual, topological, statistical and air void shape properties. It was found that, in the range of porous asphalt materials investigated in this research, the high dispersion in hydraulic conductivity at constant air void content is a function of the average air void diameter. Finally, the relationship between average void diameter and the maximum aggregate size and gradation in porous asphalt materials was investigated.

Rotavirus (RV) and norovirus (NoV) are the leading cause of acute gastroenteritis (AGE) worldwide. Several studies have demonstrated that histo-blood group antigens (HBGAs) have a role in NoV and RV infections, since their presence on the gut epithelial surfaces is essential for the susceptibility to many NoV and RV genotypes. Polymorphisms in genes that code for enzymes required for HBGAs synthesis lead to secretor or non-secretor and Lewis positive and Lewis negative individuals. While secretor individuals appear to be more susceptible to RV infections, regarding NoVs infections there are too many discrepancies that prevent drawing conclusions. A second factor that influences enteric viral infections is the gut microbiota of the host. In vitro and animal studies have determined that the gut microbiota limits, but in some cases enhances, enteric viral infection. The ways microbiota can enhance NoV or RV infection include virion stabilization and promotion of virus attachment to host cells, whereas experiments with microbiota-depleted and germ-free animals point to immunoregulation as the mechanism by which the microbiota restricts infection. Human trials with live, attenuated RV vaccines and analysis of the microbiota in responders and non-responders individuals also allowed the identification of bacterial taxa linked to vaccine efficacy. As more information is gained on the complex relationships that are established between the host (glycobiology and immune system), the gut microbiota and the intestinal viruses, new avenues will be open for the development of novel anti-NoV and anti-RV therapies.

Weight loss solutions are on the rise, and there is growing interest in natural alternatives to the pharmaceuticals in the market, which are not devoid of relevant side effects. To this end, the objective of the current study is to assess the effects of a botanical-based blend comprised of lemon verbena and hibiscus extracts in weight management, body fat, appetite, lipid, and glucose profiles, in an overweight population, for 90 days. As a result, the volunteers presented significant weight loss in absence of diet, which coincided with decreased body fat. Body fat was assessed by anthropometry, electrical bioimpedance and DEXA scan. Cholesterol levels were also significantly decreased. Satiety assessment revealed that the product contributed to increased feeling of fullness and satisfaction after a meal, compared to the placebo group, which could contribute to the weight loss observed. Blood glucose and blood pressure levels remained unchanged, which was expected as the volunteers were normoglycemic and their blood pressure was in the healthy range. In conclusion, daily supplementation of a botanical-based blend contributes to weight loss in overweight individuals, in absence of diet, while not affecting other parameters that are in the healthy range. This product could be a candidate alternative or add-on to other weight loss products, as part of a healthy lifestyle.

Plant male sterility refers to the failure in the production of fertile pollen. It occurs spontaneously in natural populations and may be caused by genes encoded in the nuclear (genic male sterility; GMS) or mitochondrial (cytoplasmic male sterility; CMS) genomes. This feature has great agronomic value for the production of hybrid seeds and has been widely used in crops, such as corn, rice, wheat, citrus, and several species of the family Solanaceae. Mitochondrial genes determining CMS have been uncovered in a wide range of plant species. The modes of action of CMS have been classified in terms of the effect they produce in the cell, which ultimately leads to a failure in the production of pollen. Male fertility can be restored by nuclear-encoded genes, termed restorer-of-fertility (Rf) factors. CMS from wild plants has been transferred to species of agronomic interest through somatic hybridization. Somatic hybrids have also been produced to generate CMS de novo upon recombination of the mitochondrial genomes of two parental plants or by separating the CMS cytoplasm from the nuclear Rf alleles

Neck lymphangiomas are rare, benign congenital malformations that predominate in childhood. Most present before the age of two. There are no risk factors related to sex, ethnic origin or predominance on either side, and they can occur in any anatomical location, although the most frequent is in the head and neck. The clinical presentation depends on its location. The most frequent symptom is the existence of a painless mass that grows slowly. Available therapeutic tools include surgery, systemic treatment, and injection of sclerosing agents.

In this paper, the power quality of interconnected microgrids is managed using a Model Predictive Control (MPC) methodology which manipulates the power converters of the microgrids in order to achieve the requirements. The control algorithm is developed for the microgrids working modes: grid-connected, islanded and interconnected. The results and simulations are also applied to the transition between the different working modes. In order to show the potential of the control algorithm, a comparison study is carried out with classical Proportional-Integral Pulse Width Modulation (PI-PWM) based controllers. The proposed control algorithm not only improves the transient response in comparison with classical methods but also shows an optimal behavior in all the working modes, minimizing the harmonics content in current and voltage even with the presence of non-balanced and non-harmonic-free three-phase voltage and current systems