This study investigated the physical and combustion properties of briquettes produced from agricultural wastes (groundnut shells and corn cobs), wood residues (Anogeissus leiocarpus) and admixtures of the particles at 15%, 20% and 25% starch levels (binder). A 6 x 3 factorial experiments in a Completely Randomized Design (CRD) was adopted for the study. The briquettes produced were analyzed for density, volatile matter, ash content, fixed carbon and specific heat of combustion. The result revealed that the density ranged from 0.44g/cm³ to 0.53g/cm³, while briquettes produced from groundnut shells had the highest (0.53g/cm³) significant mean density. Mean volatile matter and ash content of the briquettes ranged from 24.35% to 34.95% and 3.37% to 4.91%. A. leiocarpus and corn cobs particles had the lowest and highest ash content respectively. The briquette fixed carbon and specific heat of combustion ranged from 61.68% to 68.97% and 7362kca/kg to 8222kca/kg respectively. Briquette produced from A. leiocarpus particles had the highest specific heat of combustion. In general, briquettes produced from A. leiocarpus particles and admixture of groundnut shell and A. leiocarpus particles at 25% starch level had better quality in terms of density and combustion properties and thus suitable as environmentally friendly alternative energy source.

This article describes the challenges, pharmacological strategies, and recommendations for managing multidrug-resistant breast cancer in Sub-Saharan Africa (SSA). By examining the current breast cancer treatment landscape, region-specific challenges, and promising pharmacological interventions, the objective is to bring to light the insufficient research on breast cancer and its multidrug resistance in this part of the world and guide healthcare professionals, policymakers, and researchers in developing evidence-based strategies for improved breast cancer care in SSA. Breast cancer is the leading cause of cancer morbidity in SSA, necessitating continuous advancements in its management. This overview explores the evolution of breast cancer treatment, including surgery, targeted therapy, immunotherapy, radiotherapy, and chemotherapy. Despite these advancements, multidrug resistance poses a significant challenge, impacting treatment efficacy and patient outcomes.The article provides insights into various breast cancer treatment modalities, emphasizing surgery, targeted therapy, immunotherapy, radiotherapy, and chemotherapy. Each approach is discussed in detail, highlighting its significance in managing breast cancer. The effectiveness of these treatments is contingent on timely diagnosis and intervention. Multidrug resistance is examined as a critical obstacle in breast cancer treatment, elucidating its impact on treatment failure and patient outcomes. Mechanisms such as the efflux system, enhanced DNA repair, apoptosis inhibition, alterations in drug targets, and the tumor microenvironment contribute to multidrug resistance, emphasizing the need for a multifaceted understanding.The unique challenges faced in SSA regarding multidrug-resistant breast cancer are delineated. These include the lack of comprehensive data, late presentation and diagnosis, poor genomic studies, limited access to specialized care, financial constraints, inadequate infrastructure, and psychosocial support issues. Addressing these challenges is crucial for devising effective strategies. In response to multidrug resistance, the article discusses contemporary treatment strategies such as P-glycoprotein inhibitors, combined chemotherapy, and immunotherapy. Notable advancements, including the use of Tariquidar and synergistic effects of combined chemotherapy, are highlighted, presenting promising avenues for overcoming resistance.The article proposes recommendations to enhance breast cancer management in SSA, encompassing strengthening primary healthcare services, creating specialized oncology facilities and long-term monitoring and data collection. Breast cancer management in SSA is multifaceted, marked by challenges and evolving solutions. Multidrug resistance remains a significant hurdle, demanding a holistic approach. Promising advancements in pharmacological interventions offer hope, while comprehensive recommendations serve as a roadmap for progress. By implementing these strategies, SSA can substantially improve multidrug-resistant breast cancer care and overall patient well-being.

Hundreds of thousands of kilometers of communication and power (umbilical) cables and flowlines lie undersea worldwide. Most of these offshore cables and flowlines have reached or will soon be nearing the end of their service life, necessitating the need for a viable recycling approach to recover some valuable material, e.g., copper. However, separation into constituent materials has proven very challenging due to the highly robust design of the composite cables (and flowlines) to withstand service conditions and the tough external plastic sheaths that protect against seawater corrosion. Here, we summarize the findings of the cryogenic comminution of subsea cables and flowlines for an effective separation and recovery of component materials. Heat transfer analyses of complex multilayer flowlines and umbilicals were conducted to evaluate the time required for these structures to reach their respective critical brittle-transition temperatures. Subsequently, the time was used as a guide to crush the flowline and umbilical cables under cryogenic conditions. The results show that the flowlines and umbilical cables will reach the brittle-transition temperature after approximately 1000s (i.e., 17 min) of submergence in liquid nitrogen (LN). Comminution of the materials at temperatures near the brittle-transition temperature was proven relatively efficient compared to room-temperature processing. The present evaluation of heat transfer and lab-scale crushing will afford accurate process modelling and design of a pilot cryogenic comminution of decommissioned flowlines in an LN-doped atmosphere.

Background This study aimed to identify the prominent risk factors that may trigger danger signals of early onset of vascular deregulation in T1D. The risk factors we have identified may serve as dual-purpose biomarkers of rapid diagnosis that offer prospective tailor-made resolution therapeutics. Methods The healthy control (HC) was compared with individuals diagnosed with T1D for the risk factors of vascular deregulation in published research studies from year 2013 to 2023. The PubMed, Web of Science and Google Scholar databases were searched from 1/1/2013 to 1/9/2023. The risk of bias was assessed with the Cochrane (ROBINS-I ) tool, which is relevant to clinical subjects. A random effect model for continuous data was followed and analysed by RevMan 5.4 and GraphPad Prism software. Results 80 relevant case-control studies having 5293 HC and 7492 T1D patients were included. The age and sex-matched HC consisted of persons free of disease and not under any medication while clinical subjects of all age groups were included. 28 risk factors were grouped into six primary outcome models, all of which favoured the T1D synonymous with a high risk of CVD. Conclusions Our findings have strong implications for improving the quality of life and health economics related to vascular disease in T1D. HbA1c% is the most effective biomarker, followed by FBG, LDL-C, and AI% which the clinicians could evaluate using a simple blood test or non-invasive techniques. (Protocol registered at https://www.crd.york.ac.uk/prospero/ CRD42022384636).

Background: Although widely believed to be safe for use in infants and children when used as directed, increasing evidence indicates that early life exposure to paracetamol (acetaminophen) may cause long-term neurodevelopmental problems. Further, recent studies in animal models demonstrate that cognitive development is exquisitely sensitive to paracetamol exposure during early development. In this study, evidence for the claim that paracetamol is safe was evaluated using a systematic literature search. Methods: Publications on PubMed between 1974 and 2017 that contained the keywords “infant” and either “paracetamol” or “acetaminophen” were considered. Of those initial 3096 papers, 218 were identified that made claims that paracetamol was safe for use with infants or children. From these 218, a total of 103 papers were identified as sources of authority for the safety claim. Results and Conclusions: A total of 52 papers contained actual experiments designed to test safety, and had a median follow-up time of 48 hours. None monitored neurodevelopment. Further, no trial considered total exposure to drug since birth, eliminating the possibility that the effects of drug exposure on long-term neurodevelopment could be accurately assessed. On the other hand, abundant and sufficient evidence was found to conclude that paracetamol does not induce acute liver damage in babies or children when used as directed.

Rationale: Genetically modified (GM) foods have the potential to reduce food insecurity and address economic and environmental issues. Despite these benefits, GM foods continue to face significant criticism and there is limited information on public awareness and understanding of their nutritional and environmental health benefits in Nigeria. This study aims to fill this gap by investigating public knowledge and perceptions of GM foods in Victoria Island, Lagos. Methods: A convenience sampling method was used to recruit 369 respondents from Victoria Island, Lagos. Data were gathered using a structured questionnaire. The target population comprised employed adults either residing or working on Victoria Island. Statistical analyses were conducted to examine the relationship between sociodemographic factors and awareness of GM foods. Results: The study found that a majority of respondents (62.9%, n=232) were knowledgeable about GM foods and their associated issues. However, many believed that their community was not well-informed on the topic. Awareness of GM foods was significantly associated with sociodemographic factors such as marital status and education (P<0.01). Most respondents were well-informed about the environmental and health benefits of GM foods, with 61.8% believing that GM food production could sustainably reduce reliance on chemical pesticides, fertilizers, and other energy inputs, thus mitigating their ecological impacts. Additionally, most respondents did not feel that purchasing or consuming GM foods conflicted with their beliefs or would affect their food choices. Conclusion: The study concludes that while individual awareness of GM foods is relatively high, there is a perception that community awareness is low. Sociodemographic factors play a significant role in shaping public awareness and perceptions of GM foods. Recommendations: This includes government should actively educate the public on the ecological and health benefits of GM foods and address any safety concerns; Implement strict border controls and food labeling for GM products to protect consumer rights and preferences for organic foods, provide sufficient technical and financial assistance to farmers who participate in organic seed programs to enhance national food security. Significant Statement: This study highlights the importance of public education on GM foods and underscores the need for government intervention to ensure informed consumer choices and support for sustainable agricultural practices.

The wide use of cadmium (Cd) in industry causes great environmental health problems to humans and animals. The aim of this study was to investigate the protective effects of Xylopia aethiopica fruit ethanol extract (XAFEE) on cadmium-induced inflammation and dyslipidemia in male albino rats. Thirty albino rats weighing 120–180 g were randomly selected into six groups (n = 5): control rats (administered distilled water only), Cd alone group (10 mg/ kg bw), Cd + 150 mg/kgbw XAFEE, Cd + 300 mg/kgbw XAFEE, 150 mg/kgbw XAFEE and 300 mg /kgbw XAFEE groups after 2-week acclimatization. The experiment lasted for 21 days, after which blood sample was collected by cardiac puncture. Changes in tumor necrosis factor (TNF-α), interleukin 10 (IL-10), total cholesterol (TC), triacylglycerol (TAG), phospholipids and free fatty acids (FFAs) concentrations in serum were determined. The results of the present study indicated that Cd exposure remarkably increased (p < 0.05) the TC, TAG, phospholipids, FFAs and TNF-α concentrations, and significantly decreased IL-10 concentration (p < 0.05). These findings suggest that inflammatory changes and alterations in lipid metabolism might be one of the mechanisms underlying the subtle effects of Cd toxicity, “dyslipidemia.” XAFEE expressed protective role against toxic influence of Cd on affected parameters in rats. The results raised the possibility of Xylopia aethiopica fruit being considered as a condiment in soup, local drinks, supplements or herbs preparations in areas where there are chances of Cd exposure, occupationally or environmentally.

The wide use of cadmium (Cd) in industry causes great environmental health problems to humans and animals. The aim of this study was to investigate the protective effects of Xylopia aethiopica fruit ethanol extract (XAFEE) on cadmium-induced inflammation and dyslipidemia in male albino rats. Thirty albino rats weighing 120–180 g were randomly selected into six groups (n = 5): control rats (administered distilled water only), Cd alone group (10 mg/ kg bw), Cd + 150 mg/kgbw XAFEE, Cd + 300 mg/kgbw XAFEE, 150 mg/kgbw XAFEE and 300 mg /kgbw XAFEE groups after 2-week acclimatization. The experiment lasted for 21 days, after which blood sample was collected by cardiac puncture. Changes in tumor necrosis factor (TNF-α), interleukin 10 (IL-10), total cholesterol (TC), triacylglycerol (TAG), phospholipids, free fatty acids (FFAs) and HDL-TAG concentrations in serum were determined. The results of the present study indicated that Cd exposure remarkably increased (p < 0.05) the TC, TAG, phospholipids, FFAs, HDL-TAG, TNF-α concentrations, and significantly decreased IL-10 concentration (p < 0.05). These findings suggest that inflammatory changes and alterations n lipid metabolism might be one of the mechanisms underlying the subtle effects of Cd toxicity, “dyslipidemia.” XAFEE expressed protective role against toxic influence of Cd on affected parameters in rats. The results raised the possibility of Xylopia aethiopica fruit being considered as a condiment in soup, local drinks, supplements or herbs preparations in areas where there are chances ofCd exposure, occupationally or environmentally.

Artificial Intelligence (AI) and Deep Reinforcement Learning (DRL) have revolutionised e-learning by creating personalised, adaptive, and secure environments. However, challenges such as privacy, bias, and data limitations persist. E-FedCloud aims to address these issues by providing more agile, personalised, and secure e-learning experiences. This study introduces E-FedCloud, an AI-assisted adaptive e-learning system that automates personalised recommendations and tracking, thereby enhancing student performance. It employs federated learning-based authentication to ensure secure and private access for both course instructors and students. Intelligent Software Agents (ISAs) evaluate weekly student engagement using the Shannon Entropy method, classifying students into either engaged or not-engaged clusters. E-FedCloud utilises weekly engagement status, demographic information, and an innovative DRL-based early warning system, specifically ID2QN, to predict the performance of not-engaged students. Based on these predictions, the system categorises students into three groups: risk of dropping out, risk of scoring lower in the final exam, and risk of failing the end exam. It employs a multi-disciplinary ontology graph and an attention-based capsule network for automated, personalised recommendations. The system also integrates performance tracking to enhance student engagement. Data is securely stored on a blockchain using the LWEA encryption method.

(1) Background: A simple approach to map irrigated landcover has been introduced by using measures derived from optical spectral range as an alternative to thermal range. It has been demonstrated that substituting surface temperature (Ts, ‘thermal approach’) with SWIR transformed reflectance (STR, ‘optical approach’) to detect surface moisture is feasible with comparable results. (2) Methods: Using an iterative thresholding procedure to minimize within-class variance, the bilevel segmentation of variables derived from Landsat-8 representing surface moisture and vegetation cover was achieved for the 2020-21 summer for a key irrigation district in Australia. (3) Results: The results of irrigated landcover by optical approach found to be comparable with those by thermal approach. The classification accuracy was assessed using water delivery records at farm level. Though the overall accuracy is high in both cases, the optical approach (97.6%) performed slightly better than the thermal approach (93.9%). (4) Conclusions: The feasibility of using STR to map irrigated landcover has been confirmed by a high-level overall accuracy assessment. This has broader implications in terms of irrigated landcover assessment, as the use of satellite imagery in these applications may not necessarily be limited to microwave or thermal sensors.

A growing body of literature suggests a causative relationship between severe adverse neurological outcomes and early life exposure to paracetamol (acetaminophen) in the presence of oxidative stress. Review of the literature revealed that, although its use is not regularly monitored, paracetamol has achieved near universal acceptance, with exposure in some pediatric populations exceeding 90%. In addition, use of the drug as well as associated adverse outcomes may have risen as a result of pharmaceutical advertising rather than need, and inappropriate use of the drug, both in terms of dose and indication, is widespread. These findings indicate that many clinicians and patients do not, at the present time, evenly weigh the potential risks with the potential benefits of paracetamol exposure early in life. Although retrospective studies might be envisioned to further address the neurodevelopmental risks of paracetamol use during early development, in silico simulations demonstrated that such studies can be thwarted by very high rates of use of the drug combined with associations between paracetamol use and oxidative stressors that act as cofactors in the induction of neurodevelopmental injury. These findings suggest that, despite persistent uncertainty, clinicians and patients should be more aware of available information pointing toward the potential dangers for neurodevelopment of early life exposure to paracetamol. Most importantly, health care workers need to provide a more balanced view, weighing both risks and benefits, when providing advice for patients regarding paracetamol use during periods of brain development.

Survivors of sexual and gender-based violence (SGBV) are often hindered in their quest to access quality healthcare. This could complicate the achievement of the laudable SDG Target 3.7. The study used an ethnographic approach to solicit information from health providers, adolescents, and young women (AYW) in 10 communities from Lagos and Ibadan; two major cities in Nigeria. Findings indicated that the structural system of services provided in the health services at the primary healthcare level was limited, which posed a great challenge in AYW’s utilization of services for sexual and gender-based violence (SGBV). Some of the challenges identified by health providers included non-existing counseling services, rehabilitation centers, referral problems, and a lack of training for health providers in handling victims of SGBV. The study provided the context of the health providers’ inadequacy and structural problem of health services in providing comprehensive support services to victims of SGBV like adolescents and young women in the slum setting. This poses a barrier to the utilization of services by the survivors. Necessary inclusive services that will meet the need of the victims of SGBV should be in place at primary healthcare centers close to the people in the community for accessibility.

Many cities are increasingly adopting blue-green infrastructure (BGI) to bolster resilience against environmental challenges. Beyond its well-acknowledged environmental benefits, the role of BGI in enhancing social resilience is becoming an equally important area of focus. However, the integration of BGI to foster social resilience presents complexities, stemming from the evolving and occasionally ambiguous definition of social resilience. Considering the broad application of BGI across various disciplines makes the evaluation of social resilience within a BGI framework complex. Consequently, a structured approach to develop a clear framework tailored to understanding and measuring social resilience in a BGI setting is needed. This study consolidates various existing frameworks of social resilience, especially utilizing the detailed 5S framework proposed by Saja et al. [1]. It integrates findings from an extensive review of literature on social resilience to develop a novel conceptual framework, the BGI Social Resilience Framework. This new framework specifically aims to capture the distinct social aspects and advantages associated with BGI. The BGI Social Resilience Framework is organized into a three-tier model focusing on four critical aspects of social resilience—social values, social capital, social structure, and social equity—and explores how these aspects are interconnected. Characteristics and indicators are customized to accomodate the BGI context in a way that integrates the physical and human dimensions within a comprehensive approach to measurement that uses a combination of qualitative and quantitative methods. Specifically, this research formulates a theoretical framework for BGI with the aim of investigating BGI strategies and viewpoints that bolster social resilience. The BGI Social Resilience Framework takes into account the varied demographics and the physical characteristics of urban areas to explore ways to create BGI spaces that are more inclusive and contribute to the enhancement of social resilience.

Buruli ulcer is a chronic ulcerative disease of skin and subcutaneous tissues caused by infection with Mycobacterium ulcerans. Although Australian possums are known to be susceptible to Buruli ulcer, many aspects of the disease in possums, including welfare impacts, remain largely unreported. Severe clinical Buruli ulcer was identified in four common ringtail possums (Pseudocheirus peregrinus) from Melbourne, Victoria. All four possums were euthanised due to welfare concerns and poor prognosis, based on the presence of deep ulcerative lesions to paws, some of which exposed carpal or tarsal bones. These lesions were considered likely to cause partial or complete loss of limb function, which would severely affect the welfare and survival of these wild arboreal animals. Histologically, there was severe ulcerative necrotising pyogranulomatous dermatitis, panniculitis, and myositis, with intralesional acid-fast bacteria. M. ulcerans was detected by real-time PCR in all swabs and biological tissues collected from all four cases. Buruli ulcer may be an important and under-recognised cause of poor possum welfare in endemic areas. In addition to severe cutaneous lesions, infection extends to underlying bones and joints, and the systemic distribution of M. ulcerans throughout all major tissues and internal organs, as observed in these four cases, may further impact the health and fitness of infected possums. Further research is needed to investigate the epidemiology, pathogenesis and impacts of Buruli ulcer in possums, and to inform the design of interventions that may protect the health and welfare of possums and other affected animal species.

Abstract Safflower (Carthamus tinctorius L.) is a multipurpose minor crop consumed by developed and developing nations around the world with a limited research fund and genetic resources. Genomic selection (GS) is an effective modern breeding tool which could help to fast track the genetic diversity preserved in genebank collections to facilitate rapid and efficient germplasm improvement and variety development. In the present study, we simulated four GS strategies to compare genetic gains and inbreeding rates during breeding cycles in a safflower recurrent selection breeding program targeting grain yield (GY) and seed oil content (OL). We observed positive genetic gains over cycles in all four GS strategies, where the first cycle delivered the largest genetic gain. Single traits GS strategies had the greatest gain for the target trait but with very limited genetic improvement for the other trait. Simultaneous selection for GY and OL via index indicated higher gains for both traits than crossing between the two single trait independent culling strategies. The the multi-trati GS strategy with inbreeding control (GS_GY+OL+Rel) showed lower inbreeding rate but similar gain compared to GS_GY+OL (without inbreeding control) after few cycles. Our finding lay the foundation for the future safflower GS breeding.

The cellular behavior of Voronoi tessellation has generated interest due to its applicability in various fields and its notable structural properties. Controlling factors such as the gradient of the cells, the position of seed points and the thickness of the arms allows for adjusting rigidity and flexibility according to specific needs. This article analyzes the state of the art of this technique, exploring its modification for applications in engineering and design, complemented with information on natural structural properties. This comprehensive analysis provides a complete overview of Voronoi tessellation and its potential in engineering and design, categorizing methodologies according to selected processing methods and highlighting techniques for altering structural behavior. Additionally, it emphasizes the integration of biomimetic approaches, connecting nature with technology to foster continuous innovation. Finally, the article addresses encountered limitations, offering future perspectives for the cellular technique and highlights the complexity of reproducibility due to reserved or generalized steps, despite the significant diversity in implemented techniques.

Australian regional areas are now receiving significant numbers of migrants from the African continent. Predominantly Anglo-Saxon communities perceive these ‘newcomers’ as physically and culturally different. Asking, however, how African migrants themselves construct relationships with local communities and build a sense of belonging in regional and rural areas is a very different question. This paper explores South Sudanese migrants’experiences conceptualising their sense of belonging in a small county town: Castlemaine, Victoria. Focus group discussions show that even with the welcoming atmosphere and support from the local community, South Sudanese migrants are still attracted to metropolitan environments that have greater diversity, feeling more at home in such settings. Using the theoretical background of a stranger, this paper argues the cities allow strangers be un-noticed letting them feel at ‘home’. Findings from the study show settings with greater diversity encourage negotiating difference openly and easing power imbalances among different groups.Finally, the locality of Castlemaine, within easy commuting distance to metropolitan Melbourne and suburbs, is considered in relation to hypermobility reducing the capacity to construct ‘bridging capital’ within such local communities.

Concrete contributes 8% of all global carbon emissions making the need to find substitute critical for environmental sustainability. Research has indicated the potential for recycled plastics to be used as concrete substitutes. This study extends existing research by investigating the use of polycarbonate (PC) in plastic sand bricks as a mechanical equivalent to concrete. PC has high compressive strength, durability, impact strength, thermal resistivity, clarity, fatigue resistance, and UV resistance. This work provides a method and mold to produce a matrix of sand-plastic sample compositions with dimensions adhering to ASTM D695 standard for compressive properties of rigid-plastic. Compositions of 0% (control), 20%, 30%, 40%, and 50% sand by weight were tested. Samples were tested for compressive strength until yield and stress-strain behaviors plotted. The results for 100% PC demonstrated an average and maximum compressive strength of 71 MPa and 72 MPa, respectively. The 50% PC and 50% sand composition yielded an average and maximum compressive strength of 71 MPa and 73 MPa respectively with an increase in compressive stiffness, and transition to shear failure resembling cement. With a composite density of 1.86 g/cm3 against concrete’s average 2.4 g/cm3, and a compressive strength exceeding commercial concrete demands of 23.3 MPa to 30.2 MPa, this lightweight alternative meets the strength demands of concrete, reduces the need for new construction materials, and provides an additional recycling opportunity for nonbiodegradable waste plastic.

This paper investigates the relationship between public spaces and quality of life (QoL) for older adults, aiming to identify knowledge gaps within the context of population ageing and urbanization. Recognizing the growing importance of sustainable urban development, the research explores how cities can foster active ageing and improve QoL through accessible and inclusive public spaces. A scoping literature review identifies five key QoL domains for older adults: autonomy, meaningful activities, positive social relationships, leisure opportunities, and health. The review highlights areas requiring further investigation, including the interplay between environmental design and social connections, intergenerational perspectives on public space liveliness, the influence of context on QoL and the built environment, and the value of qualitative research in this field. By contributing to the understanding of QoL in relation to public spaces through the lens of Person-Environment fit theory, this study aims to inform urban design, landscape architecture, and policymaking in the creation of age-friendly communities with inclusive public spaces.

Well-intentioned regulations to protect Canada’s most productive farmland restrict large-scale so-lar photovoltaic (PV) development. The recent innovation of agrivoltaics, which is the co-development of land for both PV and agriculture, makes these regulations obsolete. Burgeoning agrivoltaics research has shown agricultural benefits including increased yield for a wide range of crops, plant protection from excess solar energy and hail, improved water conservation while maintaining agricultural employment and local food supplies. In addition, the renewable electricity generation decreases greenhouse gas emissions while increasing farm revenue. As Canada in general, and Ontario in particular, is at a strategic disadvantage in agricultural without agrivoltaics, this study investigates the policy changes necessary to capitalize on the benefits of using agrivoltaics in Ontario. Land use policies in Ontario are reviewed. Then, three case studies (peppers, sweet corn and winter wheat) are analyzed for agrivoltaic potential in Ontario. These results are analyzed in conjunction with potential policies that would continue to protect the green-belt of the Golden Horseshoe, while enabling agrivoltaics in Ontario. Four agrivoltaic policy areas are discussed: increased research and development, enhanced education/public awareness, mechanisms to support Canada’s farmers converting to agrivoltaics and using agrivoltaics as a potential source of trade surplus with the U.S.

Plasmodium falciparum dihydroorotate dehydrogenase (PfDODH) is one of the enzymes currently explored in the treatment of malaria. Although there is currently no clinically approved drug targeting PfDODH, many of the compounds in clinical trials have [1, 2, 4,] triazolo [1, 5-a] pyrimidin-7-amine backbone structure. This study sought to design new compounds from the fragments of known experimental inhibitors of PfDODH. Nine experimental compounds retrieved from Drug Bank online were downloaded and broken into fragments using Schrodinger power shell; the fragments were recombined to generate new ligand structures using BREED algorithm. The new compounds were docked with PfDODH crystal structure, after which the compounds were filtered with extensive drug-likeness and toxicity parameters. A 2D-QSAR model was built using the multiple linear regression method and externally validated. The compounds electronic behaviours were studied using DFT calculations. Structural investigation of the six designed compounds, which had lower binding energies than the standard inhibitors, showed that five of them had [1, 2, 4,] triazolo [1, 5-a] pyrimidin-7-amine moieties and interacted with essential residues at the PfDODH binding site. In addition to their drug-like and pharmacokinetic properties, they also showed minimal toxicities. The externally validated 2D-QSAR model with R² and Q² values of 0.6852 and 0.6691, confirmed the inhibitory prowess of these compounds against PfDODH. The DFT calculations showed regions of the molecules prone to electrophilic and nucleophilic attack. The current study thus provides insight into the development of a new set of potent PfDODH inhibitors.

For the Philippines, a country exposed to multiple natural hazards like severe wind, sustainable development includes resiliency. Severe wind hazard is brought by tropical cyclones in the Western Pacific, known as typhoons, that frequent the Philippines. Therefore, adequately evaluating the wind hazard and its impact is crucial for sustainable building design. Acknowledging the impacts of climate change on said hazards would require adaptation to its consequences which necessitate a deeper understanding on the changing behavior of typhoons in recent years. For this study, detailed wind information from the Japan Meteorological Agency from 1977-2021, the Holland-B parameter, and the radius of maximum wind speed for each typhoon, are determined for simulation of the regional cyclonic wind field. The analysis of the Holland-B parameters, which represent the steepness of the pressure gradient and tropical cyclone convection, suggest that the Holland-B parameters have been increasing since 2011. The regional wind fields caused by the typhoons also suggest an increasing trend in severe wind hazard. Seasonality for the location of severe wind hazard is also observed, with the Southern Philippines experiencing an increase (decrease) during the Northeast (Southwest) Monsoon season, and the Northern Philippines experiencing an increase (decrease) during the Southwest (Northeast) Monsoon season.

Despite the increase in popularity of Zero Waste (ZW) concept, the successful implementation of this concept in waste management is still facing many challenges. The plastic recycling rate in Australia is currently only about 9.4%, which could leave up to 90.6% of plastic consumption being sent to landfills. The state of Victoria (in Australia) has proposed an ambitious plan to upgrade its waste and recycling system and to divert about 80% of waste from landfills by 2030. The aim of this research is to study Victoria’s current waste management plan and to develop a simulation model to assess the feasibility of it achieving zero plastic waste by 2035. In this direction, a fundamental knowledge of global ZW implementation needs to be acquired in order to understand the challenges, obstacles, and uncertainties in achieving ZW target. A simulation model is established using a method called double baselines. This method was developed as an improvisation to address the limitation of data availability for the model development. The model will run on 4 scenarios including one from Victoria’s current plan. Outcomes from the model are produced in comparative charts covering 6 key considerations including the rates of plastic consumption, waste to landfill, diversion, recycling, relative accumulative cost and effort. The findings of this study pointed out that Victoria’s current plan are feasible for its goal and presented with opportunities for improvement especially towards zero plastic waste. Besides, study results also reveal that the Victoria’s current plan to achieve 80% diversion rate by 2030 is possible but the zero plastic waste target by 2035 is less likely to happen.

In this work, zinc oxide (ZnO)/ granular activated carbon (GAC) composites at different ZnO concentration (0.25M-ZnO@GAC, 0.5M-ZnO@GAC, and 0.75M-ZnO@GAC) were prepared by an in-situ hydrothermal method and demonstrated synergistic photocatalytic degradation and ad-sorption of Rhodamine B (RhB). The thermal stability, morphological structure, elemental com-position, crystallographic structure, and textural properties of developed catalysts were charac-terized by thermal gravimetric analysis (TGA/DTG), scanning electron microscopy equipped with energy dispersive-x-ray (SEM-EDS), x-ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) analysis. Successful loading of ZnO onto GAC was confirmed by SEM-EDS and XRD analysis. The BET surface areas of GAC, 0.25M-ZnO@GAC, 0.5M-ZnO@GAC, and 0.75M-ZnO@GAC were 474 m2/g, 450 m2/g, 453 m2/g, and 421 m2/g, respectively. The decrease in GAC could be attributed to the successful loading of ZnO on the GAC surface. Notably, 0.5M-ZnO@GAC exhibited the best photocatalytic degradation efficiency of 82% and 97% under UV-A and UV-C light over 120 min, attributed to improved crystallinity and visible light absorption. The photocatalytic degradation parameters revealed that lowering the RhB concentration, raising the catalyst dosage and pH be-yond the point of zero charge (PZC) would favor the RhB degradation. Photocatalytic reusability was demonstrated over 5 cycles. Scavenger tests revealed that the hydroxyl radicals (•OH), su-peroxide radicals (O2−•), and photoinduced hole (h+) radicals play a major role during the RhB degradation process. Based on the TOC results, the RhB mineralization efficiency of 79.1% was achieved by 0.5M-ZnO@GAC. Additionally, GAC exhibited a strong adsorptive performance towards RhB with adsorption capacity and RhB removal of 487.1 mg/g and 99.5% achieved within 90 min equilibrium time. The adsorption characteristics were best described by pseu-do-second-order kinetics, suggesting chemical adsorption. This research offers a new strategy for the development of effective photocatalyst materials with potential for wider wastewater treat-ment applications.

To stabilize the Earth’s climate a large-scale transition is needed to non-carbon emitting renewable energy technologies like wind and solar energy. Although these renewable energy sources are now lower-cost than fossil fuels, their inherent intermittency make them unable to supply a constant load without storage. To address these challenges rechargeable electric batteries are currently the most promising option; however, their high capital costs limit current deployment velocities. To both reduce the cost as well as improve performance 3D printing technology has emerged as a promising solution. This literature review provides the state-of-the-art enhancements of battery properties with 3D printing including efficiency, mechanical stability, energy and power density, customizability and sizing, production process efficiency, material conservation and environmental sustainability as well as the progress in solid-state batteries. The principles, advantages, limitations, and recent advancements associated with the most common types of 3D printing are reviewed focusing on their contributions to the battery field. 3D printing batteries offer design flexibility, material flexibility, reduces pack weight, minimizes material waste, increases the range of applications and has the potential to reduce costs. As 3D printing technologies become more accessible, the prospect of cost-effective production for customized batteries is extremely promising.

This paper presents an analysis of future precipitation patterns over the Lake Victoria Basin using bias-corrected CMIP6 model projections. A mean increase of about 5% in mean annual (ANN) and seasonal [March-May (MAM), June-August (JJA), and October-December (OND)] precipitation climatology is expected over the domain by mid-century (2040-2069). The changes intensify towards the end of the century (2070-2099) with an increase in mean precipitation of about 16% (ANN), 10% (MAM), and 18% (OND) expected, relative to the 1985-2014 baseline period. Additionally, the mean daily precipitation intensity (SDII), the maximum 5-day precipitation values (RX5Day), and the heavy precipitation events, represented by the width of the right tail distribution of precipitation (99p-90p) show an increase of 16%, 29%, and 47%, respectively, by the end of the century. The projected changes have a substantial implication for the region - which is already experiencing conflicts over water and water-related resources.

All-solid-state lithium batteries (ASSLBs) using argyrodite electrolyte materials have shown promise for applications in electric vehicles (EVs). However, understanding the effects of pro-cessing parameters on the ionic conductivity of these electrolytes is crucial for optimizing battery performance and manufacturing methods. This study investigates the influence of electrolyte op-erating temperature, electrolyte operating pressure, electrolyte pelletization pressure, and electro-lyte pelletizing temperature on the ionic conductivity of Li6PS5Cl0.5Br0.5 argyrodite electrolyte (AmpceraTM, D50=10 µm). A specially designed test cell is employed for the experimental meas-urements, allowing for controlled pelletization and testing within the same tooling. The results demonstrate the significant impact of the four parameters on the ionic conductivity of the argy-rodite electrolyte. The electrolyte operating temperature has a more pronounced effect than oper-ating pressure, and pelletizing temperature exerts a greater influence than pelletizing pressure. This study provides graphs that aid in understanding the interplay between these parameters and achieving desired conductivity values. It also establishes a baseline for the maximum pelletizing temperature before undesirable degradation of electrolyte occurs. By manipulating the pelletizing pressure, operating pressure, and pelletizing temperature, battery engineers can achieve the desired conductivity for specific applications. The findings emphasize the need to consider operating conditions to ensure satisfactory low-temperature performance, particularly for EVs. Overall, this study provides valuable insights into processing and operating conditions for ASSLBs utilizing Li6PS5Cl0.5Br0.5 argyrodite electrolyte.

Phylogenomics has enriched our understanding that the Tree of Life can have network-like or reticulate structures among some taxa and genes. Non-vertical modes of evolution—such as hybridization/introgression and horizontal gene transfer—deviate from a strictly bifurcating tree model, causing non-treelike patterns. Here, we present a brief overview of a phylogenomic workflow for inferring organismal histories and compare methods for detecting reticulate evolution. We discuss how the timing of coalescent events can help disentangle introgression from incomplete lineage sorting and how horizontal gene transfer events can help determine the relative timing of speciation events. In doing so, we identify pitfalls of certain methods and discuss how to extend their utility across the Tree of Life. Workflows, methods, and future directions discussed herein underscore the need to embrace reticulate evolutionary patterns for understanding the timing and rates of evolutionary events, providing a clearer understanding of life’s history.

Some preterm and sick neonates have altered biochemical profiles and follow-up newborn screening (NBS) collections are recommended. The Victorian NBS program historically recommended recollections for babies with birth weight &lt;1500g (managed by the maternity service provider) and 3 weeks post-transfusion (managed by the laboratory). We aimed to determine adherence to current guidelines and review the guidelines to improve NBS performance. To do this we audited data from 348,584 babies between January 2018 and June 2022. Babies with a recorded birth weight of &lt;1500g were filtered for inclusion. For the overall review and visualization of the protocol, we sourced information from the literature, our professional society and tertiary hospital services. A total of 2647 babies had a birth weight recorded between 200 and 1499g. Of these 2036 (77%) had a second sample collected, indicating that &gt;1 in 5 babies were not receiving a follow-up collection. Our timing of recollections for transfused babies, requiring a 3-week follow-up collection, was longer than in other Australasian jurisdictions. A new combined “sick-prem-protocol” was launched to support recollections and after a one-year review achieve 95% compliance. We recommend NBS laboratories audit preterm and sick neonate recollections to ensure appropriate follow-up. This should be supported with a visual process map to aid education and compliance.

Smart manufacturing encompasses a category of manufacturing that employs computer-integrated capabilities and technologies to enhance supply chain optimization, production efficiency, and recyclability. Yet limited studies have been conducted to optimize these prospects from the perspective of low resource countries where such innovative studies have not been adequately explored. This paper aims to examine the implications of smart manufacturing practices (Smart Procurement, Smart Supply Chain, Smart Production Planning and Control, Automation and Industrial Robot, and Supply Chain Configuration) on pro-environmental behaviour and develop a baseline moderated mediation model to explain the relationship between smart manufacturing and pro-environmental behaviour with a role of green dynamic capability, and environmental orientation. This study is anchored on quantitative research approach, deductive reasoning, and explanatory design. Cross – sectional survey data have been obtained from 382 manufacturing companies in Ghana. Our hypotheses have been tested using Structural Equation Modelling and SMART-PLS version 3.8.9. The study has revealed that smart manufacturing practices significantly and positively relate to pro-environmental behaviour. Moreover, green dynamic capability and environmental orientation moderate the relationship between smart manufacturing and pro-environmental behaviour. The implications of the study include the emergence of a baseline model to guide policymakers, practitioners, and academicians to explain the relationship between smart manufacturing and sustainable manufacturing in the context of developing countries. Again, the social implication of the study includes the realisation of decent job and economic growth, responsible consumption and production as well as actions taken to combat climate change.

Pharmacogenomic (PGx) testing to inform antidepressant medication selection and dosing is gaining attention from healthcare professionals, patients, and payors in Australia. However, there is often uncertainty regarding which test is most suitable for a particular patient. Here, we identified and evaluated the coverage of CYP2D6 and CYP2C19 variants in commercial antide-pressant PGx testing panels in Victoria, a large and ethnically diverse state of Australia. Test characteristics and star alleles tested for both genes were obtained directly from pathology la-boratories offering PGx testing and compared against the Association of Molecular Pathology’s recommended minimum (Tier 1) and extended (Tier 2) allele sets. Although all tests covered the minimum recommended alleles for CYP2C19, this was not the case for CYP2D6. This study em-phasizes that PGx tests might not be suitable for all individuals in Australia due to the limited range of star alleles assessed. Inadequate haplotype coverage may risk misclassification of an individual’s predicted metabolizer phenotype which has ramifications for depression medica-tion selection and dosage. The study underscores the urgent need for greater standardization in PGx testing and emphasizes the importance of considering genetic ancestry when choosing a PGx testing panel to ensure optimal clinical applicability.

Africa’s water needs are often supported by eutrophic waterbodies dominated by cyanobacteria posing health threats to riparian populations from cyanotoxins, and Lake Victoria is no exception. In two embayments of the lake (Murchison Bay and Napoleon Gulf), cyanobacterial surveys were conducted to characterize the dynamics of cyanotoxins in lake water and water treatment plants. Forty-six cyanobacterial taxa were recorded and out of these 14 were considered potentially toxigenic (i.e., from the genera Dolichospermum, Microcystis, Oscillatoria, Pseudanabaena and Raphidiopsis). A higher concentration (ranging from 5-10 µg MC-LR equiv. L-1) of microcystins (MCs) was detected in Murchison Bay compared to Napoleon Gulf, with a declining gradient from the inshore (max. 15 µg MC-LR equiv. L-1) to the open lake. In Murchison Bay, an increase either in Microcystis sp. biovolume and MC was observed over the last two decades. Despite high cell densities of toxigenic Microcystis and high MC concentrations, the water treatment plant in Murchison Bay efficiently removed the cyanobacterial biomass, intracellular and dissolved MC to below the lifetime guideline value for exposure via drinking water (&lt; 1.0 µg MC-LR equiv. L-1). Thus, the potential health threats stem from the consumption of untreated water and recreational activities, along the shores of the lake embayments. MC concentrations were predicted from Microcystis cell numbers regulated by environmental factors such as solar radiation, wind speed in the N-S direction and turbidity. Thus, an early warning through microscopical counting of Microcystis cell numbers is proposed to better manage health risks from toxigenic cyanobacteria in Lake Victoria.

Depression continues to be a glaring global challenge. The most worrisome trend is eating up the youthful generation more than anyone could predict years back. As Addis & Martell (2004) note, these adolescents end up succumbing to conditions that can be traced wholly from depression. Behavioral activation can be a rewarding intervention that will go a long way in cutting down on these cases and ensure the youthful global population's lives are safeguarded if applied and monitored to ensure correct and collective implementation processes and systems. The insights and arguments presented in the research paper will focus on the utility of behavioral activation in reducing depression cases among adolescents.

Distributed digital manufacturing offers a solution to medical supply and technology shortages during pandemics. To prepare for the next pandemic, this study reviews the state-of-the-art for open hardware designs needed in a COVID-19-like pandemic. It evaluates the readiness of the top twenty technologies requested by the Government of India. The results show that the majority of the actual medical products have had some open source development, however, only 15% of the supporting technologies that make the open source device possible are freely available. The results show there is still considerable work needed to provide open source paths for the development of all the medical hardware needed during pandemics. Five core areas of future work are discussed that include: i) technical development of a wide-range of open source solutions for all medical supplies and devices, ii) policies that protect the productivity of laboratories, makerspaces and fabrication facilities during a pandemic, as well as iii) streamlining the regulatory process, iv) developing Good-Samaritan laws to protect makers and designers of open medical hardware, as well as to compel those with knowledge that will save lives to share it, and v) requiring all citizen-funded research to be released with free and open source licenses.

This research investigates the influence of yoga on social intelligence and academic performance of business students. Employing a randomised controlled experiment with Executive MBA participants, the research explores the mediating role of mindfulness in these relationships. Results indicate that yoga positively influences social intelligence, decision-making skills as reflected in case study scores, and overall academic performance. Mindfulness is found to partially mediate these relationships, accounting for a significant portion of the observed effects. The study reveals that yoga directly contributes 43% to increased social intelligence, with improved mindfulness accounting for 57%. Similarly, yoga directly accounts for 46% of improved academic achievement, while enhanced mindfulness contributes 54%. These findings suggest that incorporating yoga into business education curricula could potentially enhance both the interpersonal capabilities and academic outcomes of students, preparing them more holistically for the challenges of the modern corporate world.

Free and open source hardware (FOSH) development has been shown to increase innovation and reduce economic costs. This article reviews the opportunity to use FOSH like a sanction to undercut imports and exports from a target criminal country. A formal methodology is presented for selecting strategic national investments in FOSH development to improve both national security and global safety. In this methodology, first the target country that is threatening national security or safety is identified. Next, the top imports from the target country as well as potentially other importing countries (allies) are quantified. Hardware is identified that could undercut imports/exports from the target country. Finally, methods to support the FOSH development are enumerated to support production in a commons-based peer production strategy. To demonstrate how this theoretical method works in practice it is applied as a case study to the current criminal military aggressor nation, who is also a fossil fuel exporter. The results show there are numerous existing FOSH and opportunities to develop new FOSH for energy conservation and renewable energy to reduce fossil fuel energy demand. Widespread deployment would reduce the concomitant pollution, human health impacts, and environmental desecration as well as cut financing of military operations.

There is an intense need to optimize agrivoltaic systems. This article describes the invention of a new testing system: the parametric open source cold-frame agrivoltaic system (POSCAS). POSCAS is an adapted gardening cold-frame used in cold climates as it acts as a small greenhouse for agricultural production. POSCAS is designed to test partially transparent solar photovoltaic (PV) modules targeting the agrivoltaic market. It can both function as a traditional cold frame, but it can also be automated to function as a full-service greenhouse. The integrated PV module roof can be used to power the controls or it can be attached to a microinverter to produce power. POSCAS can be placed in an experimental array for testing, agricultural and power production. It can be easily adapted for any type of partially transparent PV module. An array of POSCAS systems al-lows for testing agrivoltaic impacts from the percent transparency of the modules by varying the thickness of a thin film PV material or the density of silicon-based cells, and various forms of optical enhancement, anti-reflection coatings and solar light spectral shifting materials in the back sheet. All agrivoltaic variables can be customized to identify ideal PV designs for a given agricultural crop.

Agrivoltaic agrotunnels are currently designed for high density grow walls that are not amenable to bush berries or root crops. Commercial grow bins provide deeper substrates for produce with more root systems but have high costs per unit growing area. To overcome the economic limitations of grow bins, this study applies the distributed manufacturing open-source design paradigm to develop four designs for low-cost open source structures. The designs target root vegetables and bush fruit specifically to be adopted by remote communities with limited or no outdoor growing environment to offset the market price for imported fresh produce. The indoor growing designs provide the necessary structure for supporting grow light and grow bins and enabled the transplanted berry plants to flower and produced fruits. They provide a comparable amount (110L) or more of grow volume from 106 to 192 L. The water reservoir volume for the commercial system (62 L) and grow area (0.5 m³) is surpassed by all new designs that range from 64 to 192 L and 0.51 to 0.76 m³, respectively. These superior properties are possible with material costs for all four designs that save more than 90% of the economic cost of the commercial systems.

This study presents an experimental investigation of the convective drying process of ginger rhizomes (Zingiber officinale). It analyses the effect of moisture content on the thermal properties of dried ginger rhizomes. Drying experiments were conducted under controlled conditions to establish the relationship between moisture content and thermal conductivity. The drying kinetics were examined to provide insights into the drying behaviour of ginger rhizomes and the influence of moisture content on their thermal properties. The results demonstrated a significant impact of initial moisture content and convective drying conditions on the drying process. As drying progressed, the moisture content decreased, leading to a reduction in thermal conductivity. It was observed that drying under convective drying takes 24 hours compared to open sun drying at nine days and solar tunnel drying at eight days. The drying temperature of 60°C was considered optimum. The results show that dried ginger at an absolute moisture content of 6.63% (wb) with a thermal conductivity of 0.0553W/m. K for unblanched ginger, 9.04% (wb) with thermal conductivity of 0.0516W/m. K for blanched ginger, 8.56% (wb) moisture content with a thermal conductivity of 0.0483W/m. K for peeled ginger and 5.98% moisture content with a thermal conductivity of 0.0460W/m. K for unpeeled ginger would be ideal for making powdered ginger rhizomes. These findings have practical implications for the food industry, as they can aid in designing and improving drying processes for ginger rhizomes and similar agricultural products. By understanding the relationship between moisture content and thermal properties, more efficient drying strategies can be developed to minimise energy consumption and maintain the quality of the dried product.

Peanut is one of the important legumes grown in Kenya, ranking second after beans. Its production is most common in Western and Nyanza regions of the country with higher volumes being produced in Nyanza Region compared to the Western Region. The value chain for peanuts in Kenya consist of many actors including input dealers, producers, aggregators, traders, processors, exporters and consumers. The general objective of this study was to map the value chain for peanuts, indicating the opportunities that value chain actors can benefit from and strategies that can be used to upgrade the chain. The specific objectives were to characterize the key actors along the peanut value chain; determine the costs and value added along the groundnut value chain; and determine the constraints and opportunities in the value chain and suggest ways to upgrade the chain. A cross-sectional survey was conducted among the key actors in the value chain in 2 purposively selected sub-counties in Kenya where peanuts are predominantly produced marketed and/or consumed. The sub-counties are Karachuonyo and Nyakach. The data collected included socio-economic characteristics of the value chain actors, sales volumes and prices, trends in demand and supply, constraints and opportunities in peanuts and trade policy related issues. Secondary information mainly on value chain aspects was drawn from past research reports and internet. The data were analyzed using descriptive statistics and parameters such as means and percentages were determined and used to interpret the results. These enabled the drawing of peanut value chain map illustrating interrelations among chain actors, and activities they conduct. Results show that more females (68%) compared to 32% male participate in peanut production. Results further show that the female farmers were order compared to the male farmers. Few farmers were aware of improved technologies, for example only about 26% were aware of existence of improved peanuts varieties, and only 1.5% used the improved seed. No peanut farmer was using inorganic fertilizers, citing high price, nature of the soil and lack of knowledge as the major hindrance. At wholesale level, the chain was dominated by male traders partly attributed to the very versatile nature of the business that requires intensive travels, and also being capital intensive afforded by few females. On the other hand, retail traders were dominated by females. Retailers do deal in small quantities and therefore use less capital compared to other categories of traders. The majority of the processors were males also attributed the capital-intensive nature of the processing business. Most of the businesses were located in urban areas because of easier access to the raw materials and markets for the processed groundnuts. On multi-stakeholder platforms with various parties in the chain, an analysis of strengths, weaknesses, opportunities, and threats (SWOT) was undertaken. Cost variables were used to calculate gross margin profit and benefit-cost ratios. Overall, the sector was mostly a fresh food market, with a focus on peanut producers, processors, and direct sales to wholesalers, retailers, and end users. The SWOT analysis indicated numerous prospects, such as advantageous production ecologies, processing alternatives, and insatiable local and international markets. To operate synergistically with a collective profit motivation, institutional players must network with primary actors. Priority production restrictions, such as seed availability, chemical fertilizer costs, field pests and diseases, and declining soil fertility, should be addressed.

Combinations of Dilwet, an organosilicone surfactant, and ethephon, a hormonal compound often applied to fruit trees to thin the crop, were applied at full bloom to prevent fruit development in two young vineyards differing in elevation by 600 m. Each vineyard was planted with the same 19 red and 10 white grape cultivars from a range of countries of origin. Vineyard elevation did not affect response to treatment. A combined spray of 0.5% Dilwet with 0.04% ethephon reduced cluster number by an average of 85%, while weight of the remaining clusters was reduced by 63%, compared to unsprayed controls. Increasing the concentration of Dilwet to 1% reduced cluster number by 93% and cluster weight by 76%. There were significant differences in the response of cultivars to the treatments, depending on country of origin, with grapes originating in France responding better to higher concentrations of Dilwet. White grapes were more responsive than red grapes. These results highlight the need to test different cultivars and genetic origins of crops when examining the effects of new agricultural chemicals.

Background: Over the past few years there has been immense evolution in various areas particularly in the areas of digital technologies wherein the pace of change is very high. Industrial areas such as operations and supply chain management together with advanced technologies such as machine learning, big data analytics, artificial intelligence, as well as the Internet of Things, create completely different forms of operational models for various industries. In the area of healthcare too, these emerging computational sophistication is introduced to revolutionise the approaches to prevent, diagnose and treat diverse diseases and illnesses. Objective: The objective of this study is to provide an extensive review of the contemporary approaches utilizing data to cope with significant mental disorders. From over 60 relevant scholarly articles published between 2011 and 2023, it discusses how tools such as predictive modelling, social media analysis, data from smartphones, and chatbots help with issues such as early detection, telemonitoring, provision of psychological support, and individualised prevention. Method: An initial literature review to analyse over 60 research articles, which include empirical studies that were conducted between 2011 and 2023. The research assessed implemented novel digital approaches to mental health interventions including big data analytics for predicting condition status, machine learning for examining social media content, behaviour monitoring through smartphone sensors, and using conversational agents or chatbots. The following is an overview of general conclusions from experimental and descriptive secondary research studies published in professional outlets concerning possible advantages and disadvantages of data science applied to important concerns in mental health. Results: Research reveals that integrating subtle e-health tools in tandem with typical treatment approaches holds the potential to expand mental health services to more or less integrate them into clients’ day-to-day lives, and practically individualize effective treatments accordingly. Technological solutions for instance allow remote risk assessment, symptom monitoring and determination of treatment compliance. New lines of virtualized paradigm solve social challenges that interfere with the conventional provision and consumption of care. However, questions of privacy and the long-term effects as well as clinical adoption are yet to be solved in a analytically distinct manner.

The intricate interplay between driver cognitive dysfunction, mental workload (MWL), and heart rate variability (HRV) provides a captivating avenue for investigation within the domain of transportation safety studies. This article presents a comprehensive review and examines cognitive hindrance stemming from mental workload and heart rate variability. It scrutinizes the mental workload experienced by drivers by leveraging data gleaned from prior studies that employed heart rate monitoring systems and eye tracking technology, thereby illuminating the correlation between cognitive impairment, mental workload, and physiological indicators such as heart rate and ocular movements. The investigation is grounded in the premise that the mental workload of drivers can be assessed through physiological cues, such as heart rate and eye movements. The study discovered that heart rate variability (HRV) and infrared (IR) measurements played a crucial role in evaluating fatigue and workload for skilled drivers. However, the study overlooked potential factors contributing to cognitive impairment in drivers and could benefit from incorporating alternative indicators of cognitive workload for deeper insights. Furthermore, investigated driving simulators demonstrated that an eco-safe driving Human-Machine Interface (HMI) significantly promoted safe driving behaviors without imposing excessive mental and visual workload on drivers. Recommendations were made for future studies to consider additional indicators of cognitive workload, such as subjective assessments or task performance metrics, for a more comprehensive understanding.

We present improvements in n-best rescoring of code-switched speech achieved by n-gram augmentation as well as optimised pretraining of long short-term memory (LSTM) language models with larger corpora of out-of-domain monolingual text. In addition, we consider the application of large pretrained transformer-based architectures. Our experimental evaluation is performed on an under-resourced corpus of code-switched speech comprising four bilingual code-switched sub-corpora, each containing a Bantu language (isiZulu, isiXhosa, Sesotho, or Setswana) and English. We find in our experiments that, by combining n-gram augmentation with the optimised pretraining strategy, speech recognition errors are reduced for each individual bilingual pair by 3.51% absolute on average over the four corpora. Importantly, we find that even speech recognition at language boundaries improves by 1.14% even though the additional data is monolingual. Utilising the augmented n-grams for lattice generation, we then contrast these improvements with those achieved after fine-tuning pretrained transformer-based models such as distilled GPT-2 and M-BERT. We find that, even though these language models have not been trained on any of our target languages, they can improve speech recognition performance even in zero-shot settings. After fine-tuning on in-domain data, these large architectures offer further improvements, achieving a 4.45% absolute decrease in overall speech recognition errors and a 3.52% improvement over language boundaries. Finally, a combination of the optimised LSTM and fine-tuned BERT models achieves a further gain of 0.47% absolute on average for three of the four language pairs compared to M-BERT. We conclude that the careful optimisation of the pretraining strategy used for neural network language models can offer worthwhile improvements in speech recognition accuracy even at language switches, and that much larger state-of-the-art architectures such as GPT-2 and M-BERT promise even further gains.

This paper presents the methods of estimating the mean square error of hydrological forecasts, allowing for assessment of their practical applicability. Depending upon the amount and composition of available hydrometeorological data, an appropriate method for forecast error estimation is chosen. A system of statistical tests for comparison of different forecasting methods for the same hydrologic characteristic with the same lead time is presented. These tests allow for choosing an optimal and most accurate forecasting method. Hydrological forecasting method efficiency estimation is based on comparing the forecast error with climatology or inertial (persistence) forecast error using presented tests.

Rotary drilling for oil and natural gas uses drilling fluid for lubrication of the bit, to seal off unstable shale layers, and floating out rock cuttings. Drilling fluid is a water-clay chemical mixture. Produced water is a water-sand chemical mixture. Land farming is a common disposal technique of drilling fluid and produced water. In the land farming process, amendments of fluid are repeatedly applied to the soil surface. Plant growth and soil chemical properties may be altered by additions of drilling fluid, because of alkalinity, salinity, trace elements, and petroleum residue contained in waste. The objective of this study was to determine the change in soil pH, electrical conductivity (EC), total nitrogen and carbon, and extractable nutrient levels following the land application of drilling fluid and produced water. The study was a comparison of three plots with similar soil properties and conditions. The three study plots had various levels of drilling fluid and produced water applications. The data show a major difference from field-to-field for EC, Na, and Cl levels. The EC and salt levels increased with additional applications of drilling fluid and produced water. The percent total nitrogen values and plant available P levels were very low in all fields. High EC and salt values, coupled with low N and P levels, would be detrimental to plant growth and development. To successfully vegetate this land-farm site, application of N and P fertilizer would be required. This study will help to give a better understanding of practical ways to land-farm drilling fluid and produced water in a fashion that both minimizes environmental issues and is economically feasible. Salinity changes to soil were expected to be high; there are excessive amounts of sodium and chloride in spent drilling fluid and produced water.

Laser machining by ultra-short (sub-ps) pulses at high intensity offers high precision, high throughput in terms of area or volume per unit time, and flexibility to adapt processing protocols to different materials on the same workpiece. Here we consider the challenge of optimization for high throughput: how to use the maximum available laser power and larger focal spots for larger ablation volumes by implementing a fast scan. This implies the use of high-intensity pulses approaching ∼PW/cm2 at the threshold where tunnelling ionization starts to contribute to overall ionization. A custom laser micromachining setup was developed and built to enable high speed, large area processing and easy system reconfiguration for different tasks. The main components include laser, stages, scanners, control system, and software. Machining of metals such as Cu, Al, or stainless steel, and fused silica surfaces at high-fluence and high-exposure doses at high scan speeds up to 3 m/s were tested for the fluence scaling of ablation volume, which was found to be linear. Modified surfaces are color-classified for their appearance, which is dependent on surface roughness and chemical modification. Such colour-coding can be used as a feedback parameter for industrial process control.

For consciousness to exist, an entity must have prerequisite characteristics and attributes to give rise to it. We explore these “building blocks” of consciousness in detail in this paper, which range from perceptive to computational to higher-order characteristics of an entity’s cognitive architecture. We show how each cognitive attribute is strictly necessary for the emergence of consciousness, and how the building blocks are collectively sufficient for any entity to be classified as being conscious. The list of building blocks is not limited to human or organic consciousness and may be used to classify artificial and organisational conscious entities. We further explore a list of attributes that seem intuitively necessary for consciousness, but on further investigation, are neither required nor sufficient. The building blocks do not represent a theory of consciousness but rather a meta-theory on the emergence and classification of consciousness.

It is increasingly common for experiments in biology and medicine to involve large numbers of hypothesis tests. A natural graphical method for visualizing these tests is to construct a histogram from the p-values of these tests. In this article, we examine the shapes, both normal and abnormal, that these histograms can take on, as well as present simple inferential procedures that help to interpret the shapes in terms of diagnosing potential problems with the experiment. We examine potential causes of these problems in detail, and discuss potential remedies. Throughout, examples of abnormal-looking p-value histograms are provided and based on case studies involving real biological experiments.

The detection of seismic events at regional and teleseismic distances is critical to Nuclear Treaty Monitoring. Traditionally, detecting regional and teleseismic events has required the use of an expensive multi-instrument seismic array; however in this work, we present DeepPick, a novel seismic detection algorithm capable of array-like performance from a single trace. We achieve this directly, by training our single-trace detector against labeled events from an array catalog, and by utilizing a deep temporal convolutional neural network. The training data consists of all arrivals in the International Seismological Centre Catalog for seven seismic arrays over a five year window from 1 Jan 2010 to 1 Jan 2015, yielding a total training set of 608,362 detections. The test set consists of the same seven arrays over a one year window from 1 Jan 2015 to 1 Jan 2016. We report our results by training the algorithm on six of the arrays and testing it on the seventh, so as to demonstrate the transportability and generalization of the technique to new stations. Detection performance against this test set is outstanding. Fixing a type-I error rate of 1%, the algorithm achieves an overall recall rate of 73% on the 141,095 array beam picks in the test set, yielding 102,394 correct detections. This is more than 4 times the 23,259 detections found in the analyst-reviewed single-trace catalogs over the same period, and represents an 8dB improvement in detector sensitivity over current methods. These results demonstrate the potential of our algorithm to significantly enhance the effectiveness of the global treaty monitoring network.

When we discuss migration and compare national trends, the topic most commonly centers on undocumented immigrants and asylum seekers. However, there is also considerable variation in internal migration patterns, with differences found between and within nations. Many factors shape whether, why, and where people relocate. Over the last few decades, the world's two largest economies - the United States and China - have seen domestic migration changes happening in opposite directions. China has become increasingly mobile and experienced urbanization. In contrast, the U.S. has seen a steady decline in the rate at which its population relocates, with cities experiencing net migration losses as citizens leave for suburbs. This paper examines these trends using data from the last decade to compare the two nations in areas of internal migration, urbanization, housing, social mobility, and economic growth.

Understanding molecular mechanisms of neurological disorders is required for development of personalized medicine. When the diagnosis considers not only the disease symptoms, but also their molecular basis, the treatments tailored for individual patients may be suggested. The vitamins-responsive neurological disorders are induced by deficiencies in the vitamin-dependent processes. The deficiencies may occur due to genetic impairments of proteins whose functions are involved with the vitamins. This review considers the enzymes encoded by DHTKD1, PDK3 and PDXK genes, whose mutations are observed in patients with Charcot-Marie-Tooth (CMT) disease. The enzymes bind or produce the coenzyme forms of vitamins B1 (thiamine diphosphate, ThDP) and B6 (pyridoxal-5’-phosphate, PLP). Alleviation of such disorders by administration of the lacking vitamin or its derivative calls upon a better introduction of the mechanistic knowledge to medical diagnostics and therapies. Recent data on lower levels of the vitamin B3 derivative, NAD+, in the blood of patients with CMT disease, compared to the control subjects, are also considered in view of the NAD-dependent mechanisms of pathological axonal degeneration, suggesting therapeutic potential of vitamin B3. Thus, improved diagnostics of the underlying causes of the CMT disease may allow the patients with the vitamin-responsive disease forms to benefit from the administration of the vitamins B1, B3, B6, their natural derivatives or pharmacological forms.

In this study, 6 residents of a long-term care facility were asked to try on Virtual Reality glasses and report their first experiences with Virtual Reality. The results show that Virtual Reality is of great interest to elderly residents of in-patient long-term care facilities. The wearing period was longer than expected and no symptoms of cyber sickness occurred. For the residents it was exciting to explore the virtual environments. Austrian destinations, nature scenes in the mountains and forests but also trips to the zoo, the museum, in churches or even densely populated areas like shopping streets or train stations would be places for the residents, they would like to explore virtually. Far-off destinations such as Rio de Janeiro or the Caribbean are more of an exception. Biographically relevant places such as the parental home or the location of their wedding were not named. Concerning the usability, an adjustment of the VR glasses is necessary for a longer-term use in any case.

We investigated 328 SARS-CoV-2 cases in Barwon South West Victoria, Australia, in the 2020 pre-vaccination period, comparing infections with symptoms to those that remained asymptomatic. De-identified self-reported data from three sequential questionnaires on case characteristics and symptom progression were examined. Multivariable logistic regression were used to model associations between demographic profile and symptoms. Asymptomatic cases were more than three times as likely to be from ethnic minority groups [OR 3.2, 95% CI 1.5 – 6.7, p&lt;0.01], and approximately seven times more likely to be seniors (≥ 65 years) [OR 7.3, 95% CI 1.0 – 50.1] after adjusting for sex and occupation. The overrepresentation of ethnic minority groups among asymptomatic infections is suggestive of genetic haplotype variability by ethnic group, conferring greater cross protection from other coronaviruses in the early stages of the COVID-19 pandemic. This research should be repeated post-vaccination to reassess symptom expression according to ethnicity, and better comprehend case ascertainment impacts of cultural biases in testing and infection reporting, and the reliance on symptoms to trigger testing. These findings may in part reflect differences in testing patterns by ethnicity and true differences in disease expression, both important for appropriate transmission prevention strategies, and tailoring testing messaging towards ethnic minority communities.

To regulate the growth of battery-based electric vehicles (BEVs) in Indonesia and mitigate their impact on the power grid's supply-demand balance, the government can adjust BEV regulations and offer subsidies. The Jawa-Madura-Bali (Jamali) electrical system, being the largest in Indonesia [1], faces the challenge of accommodating the increasing number of vehicles [2]. Subsequent to analyzing Jamali's electricity supply using data from the National Electricity Company (RUPTL) [3], simulations are constructed to model the grid's demand side. Input variables such as Jamali's population, internal combustion engine (ICE) and electric vehicle populations, initial charging time (ICT), slow- and fast-charging ratios, and BEV charge load curves are simulated. Scenario variables like supply capacity growth speed, vehicle population growth speed, subsidy impact on EV attractiveness, ICT, and fast-charging ratio are subsequently simulated for 2024-2029. Four key simulation outcomes are identified: the best-case scenario (Scenario 1776), achieves the highest EV growth with minimal grid disruption, resulting in a 45.38% EV percentage in 2029 and requiring an annual allocation of 492 billion rupiah to match supply with demand. The worst outcome scenario leads to a 23.12% EV percentage, necessitating 47.566 billion rupiah for EV subsidies in 2029. Additionally, the most and least probable scenarios based on literature research are evaluated. This simulation and its results provide insights into EV growth's impact on the grid's balance in one presidential term from 2024 to 2029 [4], aiding the government in planning regulations and subsidies effectively. Improving the simulation's accuracy depends on refining input variables over time.

Innovative tissue engineering biomimetic hydrogels based on hydrophilic polymers have been investigated for their physical and mechanical properties. 5% to 25% by volume loading PHEMA-nanosilica glassy hybrid samples were equilibrated at 37°C in aqueous physiological isotonic and hypotonic saline solutions (0.15 and 0.05 M NaCl) simulating two limiting possible compositions of physiological extracellular fluids. The glassy and hydrated hybrid materials were characterized both for dynamo-mechanical properties and equilibrium absorptions in the two physiological-like aqueous solutions. Mechanical and the morphological modifications occurring in the samples have been described. The 5% volume nanosilica loading hybrid nanocomposite composition showed mechanical characteristics in the dry and hydrated states that were comparable to those of cortical bone and articular cartilage, respectively, and then chosen for further sorption kinetics characterization. Sorption and swelling kinetics were monitored up to equilibrium. Changes in water activities and osmotic pressures in the water-hybrid systems equilibrated at the two limiting solute molarities of the physiological solutions have been related to the observed anomalous sorption modes using the Flory-Huggins interaction parameter approach. The bulk modulus of the dry and glassy PHEMA-5% nanosilica hybrid at 37°C has been observed to be comparable with the values of the osmotic pressures generated from the sorption of isotonic and hypotonic solutions. The anomalous sorption modes and swelling rates are coherent with the difference between osmotic swelling pressures and hybrid glassy nano-composite bulk modulus: the lower the differences the higher the swelling rate and equilibrium solution uptakes. Bone tissue engineering benefits of use of tuneable biomimetic scaffold biomaterials that can be “designed” to act as biocompatible and biomechanically active hybrid interfaces are discussed.

The target of an antibody plays a significant role in the success of antibody-based therapeutics and diagnostics, and to an extent, that of vaccine development. This importance is focussed on the target binding site – epitope, where epitope selection as a part of design thinking beyond traditional antigen selection using whole cell or whole protein immunisation can positively impact success. With purified recombinant protein production and peptide synthesis to display limited/selected epitopes, intrinsic factors that can affect the functioning of resulting antibodies can be more easily selected for. Many of these factors stem from the location of the epitope that can affect accessibility of the antibody to the epitope at a cellular or molecular level, direct inhibition of target antigen activity, conservation of function despite escape mutations, and even non-competitive inhibition sites. Through the incorporation of novel computational methods for predicting antigen changes to model-informed drug discovery and development, superior vaccines and antibody-based therapeutics or diagnostics can now be more easily designed to mitigate failures. With detailed examples, this review highlights the new opportunities, factors and methods of predicting antigenic changes for consideration in sagacious epitope selection.

Public trust in science was tested and relied on during the SARS-CoV-2 pandemic, which has shaped global events since the WHO declaration in March 11, 2020. Public trust has been impacted through the government recommendations and mandates informed by public health guidance, including non-pharmaceutical and pharmaceutical interventions. The free-flow of ideas and in-formation so essential to the functioning of science has faced unprecedented challenge from widespread censorship in both the media and in scientific journals. This has created a poisoned environment for the building of trust between science and society. Scientific norms and ac-countability must be restored in order to rebuild the vital relationship between scientists and the public they serve.

This paper extends the concept of weighted graphs to matrix weighted graphs. The consensus algorithms dictate that all agents reach consensus when the weighted graph is connected. However, it is not always the case for matrix weighted graphs. The conditions leading to different types of consensus have been extensively analysed based on the properties of matrix-weighted Laplacians and graph theoretic methods. However, in practice, there is concern on how to pick matrix-weights to achieve some desired consensus, or how the change of elements in matrix weights affects the consensus algorithm. By selecting the elements in the matrix weights, different clusters may be possible. In this paper, we map the roles of the elements of the matrix weights in the systems consensus algorithm. We explore the choice of matrix weights to achieve different types of consensus and clustering. Our results are demonstrated on a network of three agents where each agent has three states.

Decentralized Finance (DeFi) takes the promise of blockchain a step further and aims to transform traditional financial products into trustless and transparent protocols that run without involving intermediaries. Similar to how 2017 was the year of ICOs, 2020 was the year of DeFI with more than $15 billion of total investments. The decentralized platforms utilize oracles to retrieve asset data from the external world, but their choice and management criteria are often unknown to the end-users. If oracles are poorly selected or managed, the funds of a rising number of investors are inevitably in danger. The issue known as “the oracle problem,” which makes real-world applications controversial and debated due to the loss of decentralization, had recently drawn attention to DeFi given the crescent number of related hacks that caused the loss of millions of dollars held in DeFi projects. With a multivocal approach, this paper aims to shed light on the pattern that identifies the oracle problem in DeFi and outline the most promising ways to overcome the related weaknesses. This research supports the view that the oracle problem in decentralized finance bears specific characteristics which require standardization and appropriate economic incentives to be addressed.

Barriers to inventing electronic devices involve challenges of iterating electronic designs due to long lead times for professional circuit board milling or high-costs of commercial milling machines. To overcome these barriers this study provides open source (OS) designs for a low-cost circuit milling machine. First, design modifications for mechanical and electrical sub-systems of the OS D3D Robotics prototyping system are provided. Next, Copper Carve, an OS custom graphical user interface, is developed to enable circuit board milling by implementing backlash and substrate distortion compensation. The performance of the OS D3D circuit mill is then quantified and validated for: positional accuracy, cut quality, feature accuracy and distortion compensation. Finally, the return on investment is calculated for inventors using it. The results show by properly compensating for motion inaccuracies with Copper Carve, the machine achieves a motion resolution of 10 microns, which is more than adequate for most circuit designs. The mill is at least five times less expensive than all commercial alternatives and the material costs of the D3D mill are repaid from fabricating 20-43 boards. The results show that the OS circuit mill is of high-enough quality to enable rapid invention and distributed manufacturing of complex products containing custom electronics.

Organic farming products are fast gaining acceptance from consumers all over the world due to the perceived belief that they are safe for human consumption. In recent years, there has been an increase in the levels of persistent organic and inorganic pollutants in the environment. These pollutants may be found in materials such as sewage sludge, treated wastewater, farmyard manure (human and animal feaces and urine) that are used for organic farming. The present review examined through literature the presence of these emerging pollutants in crops that are cultivated from farming activities practicing organic farming. The review highlighted and documented various pollutants that may be found in crops due to non-compliance with legislation establishing organic farming. The need to develop a robust method for identifying safe products from organic farming was highlighted. The impact of non-compliance and lack of proper education on the peasant farmers practicing backyard farming was also enumerated.

As the geolocation capabilities of smartphones continue to improve, developers have continued to create more innovative applications that rely on this location information for their primary function. This can be seen with Niantic's release of Pokémon GO, which is a massively multiplayer online role playing and augmented reality game. This game became immensely popular within just a few days of its release. However, it also had the propensity to be a distraction to drivers resulting in numerous accidents, and was used to as a tool by armed robbers to lure unsuspecting users into secluded areas. This facilitates a need for forensic investigators to be able to analyze the data within the application in order to determine if it may have been involved in these incidents. Because this application is new, limited research has been conducted regarding the artifacts that can be recovered from the application. In this paper, we aim to fill the gaps within the current research by assessing what forensically relevant information may be recovered from the application, and understanding the circumstances behind the creation of this information. Our research focuses primarily on the artifacts generated by the Upsight analytics platform, those contained within the bundles directory, and the Pokémon Go Plus accessory. Moreover, we present our new application specific analysis tool that is capable of extracting forensic artifacts from a backup of the Android application, and presenting them to an investigator in an easily readable format. This analysis tool exceeds the capabilities of UFED Physical Analyzer in processing Pokémon GO application data.

The Wnt pathway plays an essential role in the initiation and progression of various types of cancer. ROR1 and ROR2 are Wnt receptors that are critical for β-catenin-independent (non-canonical) pathways and have been linked to processes driving tumor development and progression, such as cell proliferation, survival, invasion, and therapy resistance. Both receptors have garnered interest as potential therapeutic targets since they are largely absent in adult tissue, are overexpressed in several cancers, and, as members of the receptor tyrosine kinase family, are easier to target than all other components of the pathway. Unlike ROR1 which always promotes tumorigenesis, ROR2 has a very complex role in cancer acting either to promote or inhibit tumor progression in different tumor types. In the present article, we summarize the findings on ROR2 expression in cancer patients and its impact on clinical outcome. Further, we review the biological processes and signaling pathways regulated by ROR2 that explain its dual role in cancer. Finally, we describe the ongoing strategies to target ROR2 in cancer.

Accurate inundation maps for flooded wetlands and rivers are a critical resource for their management and conservation. In this paper we automate a method (thresholding of the short-wave infrared band) for classifying inundation, using Landsat imagery and Google Earth Engine. We demonstrate the method in the Okavango Delta, northern Botswana, a complex case study due to the spectral overlap between inundated areas covered with aquatic vegetation and dryland vegetation classes on satellite imagery. Inundation classifications in the Okavango Delta have predominately been implemented on broad spatial resolution images. We present the longest time series to date (1990-2019) of inundation maps at high spatial resolution (30m) for the Okavango Delta. We validated the maps using image-based and in situ data accuracy assessments, with accuracy ranging from 91.5 - 98.1%. Use of Landsat imagery resulted in consistently lower estimates of inundation extent than previous studies, likely due to the increased number of mixed pixels that occur when using broad spatial resolution imagery, which can lead to overestimations of the size of inundated areas. We provide the inundation maps and Google Earth Engine code for public use.

Mortality due to suicide is amongst the largest public health concerns across the world today and in Bharat (India). There have been concerns that the COVID-19 pandemic has contributed to worsening mental health outcomes across the world, and in Bharat. Furthermore, long COVID has been proposed to be a major consequence of COVID-19, which can also worsen mental health outcomes. Therefore, our objective in this study was to analyse trends in suicide mortality across Bharat, and to compare these trends to changes prior to the COVID-19 pandemic; as well, we aimed to analyse if long COVID had any role in these changes. It was found that, at a national level, the average annual increase of the suicide rate between 2019 and 2022 was 0.7 per 100,000 people (6.41% increase)., There was also an average annual rise in suicide rates across 27 states/union territories (out of the 33 that were analysed). States/UTs with the highest annual increases since the start of the COVID-19, despite a decrease from 2018 to 2019, were Tamil Nadu (increase by 2.7; 15.17% increase), and Telangana (increase by 1.9; 9.22% increase), Multi-linear regression had shown that the annual suicide rate changes were not associated with COVID-19 deaths per 10,000 people (standardized beta coefficient = 0.077; p = 0.605) but were associated with COVID cases per 100 people (standardized beta coefficient = 0.578; p

Seed germination is the most sensitive stage to abiotic stress, including salt stress (SS). SS affects plant growth and performance through ion toxicity, decreases seed germination percentage, and increases the germination time. Several priming treatments were used to enhance germination under SS. The objectives of this study are to 1) identify priming treatments to shorten the emergence period; 2) evaluate priming treatments against the SS; 3) induce synchronized seed germination. Salt-sensitive “Burpee bibb’ lettuce seeds were treated with 0.05% Potassium nitrate, 3 mM Gibberellic acid, and distilled water (HP). All the primed and non-primed seeds were subjected to 100 mM NaCl or 0 mM NaCl. The 7-day experiment arranged in a complete randomized block design with four replications was conducted in a growth chamber maintained with 16/8 h photoperiod (light/dark), 60% relative humidity, and day/night temperature of 22/18 °C. The result indicated that HP seeds were better synchronized under SS. Similarly, FM and DM of cotyledon, hypocotyl, and radicle were highest in HP lettuce regardless of SS. Electrolyte leakage was the lowest in the HP lettuce, while other priming methods under SS increased membrane permeability leading to osmotic stress and tissue damage. Overall, the HP can be a suitable priming method to synchronize germination and increase FM and DM by creating the least osmotic stress and ion toxicity in lettuce under SS.

Mycoviruses are highly genetically diverse, can significantly change their fungal host’s phenotype, yet, they are generally under-described in genotypic and biological studies. We propose Botrytis cinerea as a model mycovirus system in which to develop a deeper understanding of mycovirus epidemiology including diversity, impact, and the associated cellular biology of the host and virus interaction. Over 100 mycoviruses have been described in this fungal host. B. cinerea is an ideal model fungus for mycovirology as it has highly tractable characteristics – it is easy to culture, has a worldwide distribution, infects a wide range of host plants, can be transformed and gene-edited, and has an existing depth of biological resources including annotated genomes, transcriptomes, and isolates with gene knockouts. Focus on a model system for mycoviruses will enable the research community to address deep research questions that cannot be answered in a non-systematic manner. Since B. cinerea is a major plant pathogen, new insights may have immediate utility as well as creating new knowledge that complements and extends the knowledge of mycovirus interactions in other fungi, alone or with their respective plant hosts. In this review we set out some of the critical steps required to develop B. cinerea as a model mycovirus system and how this may be used in the future.

Open-source 3-D printing has played a pivotal role in revolutionizing the additive manufacturing (AM) landscape, by making distributed manufacturing economic, democratizing access, and fostering far more rapid innovation than antiquated proprietary systems. Unfortunately, some 3-D printing manufacturing companies began deviating from open-source principles and violating licenses for the detriment of the community. To determine if a pattern has emerged of companies patenting clearly open-source innovations, this study presents three case studies from the three primary regions of open-source 3-D printing development (EU, U.S. and China) as well as three aspects of 3-D printing technology (AM materials, an open-source 3-D printer, and core open-source 3-D printing concepts used in most 3-D printers). The results of this review have shown that non-inventing entities called patent parasites are patenting open-source inventions already well-established in the open source community and in the most egregious cases commercialized by one (or several) firms at the time of the patent filing. Patent parasites are able to patent open-source innovations by using a different language, vague patent titles and broad claims that encompass enormous swaths of widely diffused open-source innovation space. This practice poses a severe threat to innovation and several approaches to irradicate the threat are discussed.

As Alberta increases solar power generation, land use conflicts with agriculture increase. A solution that enables low-carbon electricity generation and continued (in some cases increased) agricultural output is the co-locating of solar photovoltaics and agriculture: agrivoltaics. This study reviews policies that impact the growth of agri-voltaics in Alberta. Solar PV-based electricity generation is governed by three regula-tions based on system capacity. In addition, agrivoltaics falls under various legisla-tions, frameworks, and guidelines for land utilization. These include Land Use Frame-work, Alberta Land Stewardship Act, Municipal Government Act, Special Areas Dis-position, Bill 22 and other laws/policies all of which are reviewed in the context of agrivoltaics. Several policies are recommended to support rapid diffusion of agrivolta-ics. First, open access research into agrivoltaics, which not only will help optimize agrivoltaic systems for the region, but also coupled with public education is expected to galvanize social acceptability of large-scale PV deployment. Clearly defining and categorizing agrivoltaic technology, developing agrivoltaic standards, making agri-voltaic technology-friendly regulations/frameworks and developing programs and pol-icies to incentivize agrivoltaic deployment over conventional PV will all accelerate dif-fusion. Through these measures, Alberta can achieve conservation and sustainability in food and energy sector while simultaneously addressing the renewable energy and climate-related goals.

The aim of this study was to evaluate the challenges basic school tutors face when integrating Information and Communication Technology (ICT) into their instructing and learning activities and to recommend possible strategies for addressing those challenges. This study employed an interpretive paradigm and a qualitative method approach to analyze the challenges basic school teachers face when integrating ICT into teaching in an emerging country, particularly Ghana. The participants of this study were chosen using purposive and snowball sampling techniques. A total of twenty (20) respondents were chosen for this study. The study found that teachers, despite their challenges, had a strong desire to integrate ICT into their instruction and learning activities. These challenges are the limited number of ICT tools and the absence of fully-subscribed software package that runs on them, the lack of electrical outlets in some classrooms, poor internet connectivity and power fluctuation. These teachers also had to deal with challenges like Trojan horses and spam despite the slow internet connectivity. The study suggested that basic school management should procure modern ICT tools and fully-subscribed software package to expand the school's ICT infrastructure giving teachers the choice to choose the ICT tools they will integrate into their teaching and learning activities for the successful integration of ICT into instruction and learning activities. Again, school management should ensure teachers are given basic training regarding ICT and its incorporation into tuition and learning activities to acquire the necessary competencies, understanding, and attitudes that will enhance teaching and learning activities.

Introduction: People with severe and persistent mental illness (SPMI) present unique challenges in mental healthcare due to the enduring nature and complexity of their conditions. This study evaluated the clinical effectiveness and potential cost benefits of a multidisciplinary community psychosocial rehabilitation team catering to individuals with SPMI in Nova Scotia, Canada. Method: The Canadian billing system of Medical Service Insurance (MSI) was used to compare inpatient service use and emergency department visits during the year before and the year after receipt of one year of community rehabilitation for patients referred to the team from September 2016 to September 2017. Result: Results demonstrated a statistically significant reduction in mean admission rates and length of inpatient admissions in the year following rehabilitation compared to the pre-rehabilitation year. A substantial percentage of patients experienced no inpatient admissions (88% v. 60%) or ED visits (82% v. 67%) in the post-rehabilitation year compared to the pre-rehabilitation year. There was a significant reduction in inpatient days by 90%, translating into substantial cost savings. The findings highlight the potential economic benefits of community rehabilitation for people with SPMI. Conclusion: This uncontrolled study suggests that community rehabilitation is associated with favourable clinical outcomes for individuals with SPMI in terms of reduced inpatient service use and related costs. Further research into community psychosocial rehabilitation services in the Canadian setting is needed, including controlled and cost-effectiveness studies.

Thermal sterilization is generally avoided for 3-D printed components because of the relatively low deformation temperatures for common thermoplastics used for material extrusion-based additive manufacturing. 3-D printing materials required for high-temperature heat sterilizable components for COVID-19 and other applications demands 3-D printers with heated beds, hot ends that can reach higher temperatures than polytetrafluoroethylene (PTFE) hot ends and heated chambers to avoid part warping and delamination. There are several high temperature printers on the market, but their high costs make them inaccessible for full home-based distributed manufacturing required during pandemic lockdowns. To allow for all these requirements to be met for under $1,000, the Cerberus – an open source three-headed self-replicating rapid prototyper (RepRap) was designed and tested with the following capabilities: i) 200^oC-capable heated bed, ii) 500^oC-capabel hot end, iii) isolated heated chamber with 1kW space heater core and iv) mains voltage chamber and bed heating for rapid start. The Cereberus successfully prints polyetherketoneketone (PEKK) and polyetherimide (PEI, ULTEM) with tensile strengths of 77.5 and 80.5 MPa, respectively. As a case study, open source face masks were 3-D printed in PEKK and shown not to warp upon widely home-accessible oven-based sterilization.

This study explores the potential to reach a circular economy for post-consumer recycled polyethylene terephthalate (rPET) packaging and bottles by using it as a distributed recycling for additive manufacturing (DRAM) feedstock. Specifically, rPET is processed using only an open source toolchain with fused particle fabrication (FPF) or fused granular fabrication (FGF) processing. In this study, first the impact of granulation, sifting and heating (and their combination) is quantified on the shape and size distribution of the rPET flakes. Then feeding studies were performed to see if they could be printed through an external feeder or needed to be direct printed with a hopper using two Gigabot X machines, one with extended part cooling and one without. Print settings were optimized based on thermal characterization and for the latter which was shown to print rPET directly from shredded water bottles mechanical testing is performed. The results showed that geometry was important for extended feeding tubes and direct printed using a hopper. Further there is a wide disparity in the physical properties of rPET from water bottles depending on source and the history of the material. Future work is needed to enable water bottles to be used as a widespread DRAM feedstock.

Transcatheter Aortic Valve Implantation (TAVI) now represents the mainstay in the treatment of severe aortic stenosis. Owing to its exceptional procedural efficacy and safety, TAVI has been extended to include patients at lower surgical risk, thus now encompassing a diverse patient population receiving this treatment. Yet, long-term outcomes also depend on optimal medical therapy for secondary vascular prevention, with antithrombotic therapy serving as a cornerstone. Leveraging data from multiple randomized controlled trials, current guidelines generally recommend single antithrombotic therapy, with either single antiplatelet therapy (SAPT) or oral anticoagulation (OAC) alone in those patients without, or with atrial fibrillation respectively. Yet, individualization of this pattern, as well as specific case uses, may be needed based on individual-patient characteristics and concurrent procedures. This review aims to discuss the evidence supporting antithrombotic treatments in patients treated with TAVI, indications for a standardized treatment, as well as specific considerations for an individualized approach to treatment.

The objective was to investigate associations of serum vitamin D concentration with depressive symptoms and assess the impact vitamin D concentration has on the occurrence of depressive symptoms in 20–44-year-old pregnant mothers, postpartum mothers, women (non-pregnant/postpartum women), and men, including a separate subgroup analysis of postpartum breastfeeding and non-breastfeeding mothers. The study populations were selected from 2007-2018 NHANES public data. Subjective interview data and objective laboratory data, including depressive symptoms, serum vitamin D concentration, nutrient intake, and demographic information were utilized. Two diet patterns were created using principal component analysis and a Bayesian multinomial model was fit to predict depression outcomes for each subpopulation. The estimates for the log vitamin D slope parameter were negative for all cohorts; as vitamin D increased, the probability of having no depression increased, while the probability of depression decreased. The pregnant cohort had the steepest vitamin D slope, followed by postpartum, then other women and men. Higher vitamin D concentration had more impact on decreasing depression risk in pregnant and postpartum mothers compared to other women and men. Among postpartum mothers, higher vitamin D concentration had a greater influence on decreasing breastfeeding mothers' depression risk than non-breastfeeding mothers.

When attempting to quantify future harms caused by carbon emissions and to set appropriate energy policies, it has been argued that the most important metric is the number of human deaths caused by climate change. Several studies have attempted to overcome the uncertainties associated with such forecasting. In this article, approaches to estimating future human deaths tolls from climate change are compared and synthesized, and implications for energy policy are considered. Several studies are consistent with the “1000-ton rule,” according to which a future person is killed every time 1000 tons of fossil carbon are burned (order-of-magnitude estimate). If warming reaches or exceeds 2°C this century, mainly richer humans will be responsible for killing roughly 1 billion mainly poorer humans through anthropogenic global warming. Such mass manslaughter is clearly unacceptable. On this basis, relatively aggressive energy policies are summarized that would enable immediate and substantive decreases to carbon emissions. The limitations to such calculations are outlined and future work is recommended to accelerate the decarbonization of the global economy while minimizing the number of sacrificed human lives.

To assist firefighters and other first responders to use their existing equipment for respiration during the COVID-19 pandemic without using single-use, low-supply, masks, this study outlines an open source kit to convert a 3M-manufactured Scott Safety self-contained breathing apparatus (SCBA) into a powered air-purifying particulate respirator (PAPR). The open source PAPR can be fabricated with a low-cost 3-D printer and widely available components for less than $150, replacing commercial conversion kits saving 85% or full-fledged proprietary PAPRs saving over 90%. The parametric designs allow for adaptation to other core components and can be custom fit specifically to fire-fighter equipment, including their suspenders. The open source PAPR has controllable air flow and its design enables breathing even if the fan is disconnected or if the battery dies. The open source PAPR was tested for air flow as a function of battery life and was found to meet NIOSH air flow requirements for 4 hours, which is 300% over expected regular use.

This study provides designs for a low-cost, easily replicable open source lab-grade digital scale that can be used as a precision balance. The design is such that it can be manufactured for use in most labs throughout the world with open source RepRap-class material extrusion-based 3-D printers for the mechanical components and readily available open source electronics including the Arduino Nano. Several versions of the design were fabricated and tested for precision and accuracy for a range of load cells. The results showed the open source scale was found to be repeatable within 0.1g with multiple load cells, with even better precision (0.01g) depending on load cell range and style. The scale tracks linearly with proprietary lab-grade scales, meeting the performance specified in the load cell data sheets, indicating that it is accurate across the range of the load cell installed. The smallest loadcell tested(100g) offers precision on the order of a commercial digital mass balance. The scale can be produced at significant cost savings compared to scales of comparable range and precision when serial capability is present. The cost savings increase significantly as the range of the scale increases and are particularly well-suited for resource-constrained medical and scientific facilities.

Nineteen million Americans have significant vision loss. Over 70% of these are not employed full-time, and more than a quarter live below the poverty line. Globally, there are 36 million blind people, but less than half use white canes or more costly commercial sensory substitutions. The quality of life for visually impaired people is hampered by the resultant lack of independence. To help alleviate these challenges this study reports on the development of a low-cost (<$24), open-source navigational support system to allow people with the lost vision to navigate, orient themselves in their surroundings and avoid obstacles when moving. The system can be largely made with digitally distributed manufacturing using low-cost 3-D printing/milling. It conveys point-distance information by utilizing the natural active sensing approach and modulates measurements into haptic feedback with various vibration patterns within the distance range of 3 m. The developed system allows people with lost vision to solve the primary tasks of navigation, orientation, and obstacle detection (>20 cm stationary, moving up to 0.5 m/s) to ensure their safety and mobility. Sighted blindfolded participants successfully demonstrated the device for eight primary everyday navigation and guidance tasks including indoor and outdoor navigation and avoiding collisions with other pedestrians.

Although distributed additive manufacturing can provide high returns on investment the current markup on commercial filament over base polymers limits deployment. These cost barriers can be surmounted by eliminating the entire process of fusing filament by 3-D printing products directly from polymer granules. Fused granular fabrication (FGF) (or fused particle fabrication (FPF)) is being held back in part by the accessibility of low-cost pelletizers and choppers. An open-source 3-D printable invention disclosed here provides for precise controlled pelletizing of both single thermopolymers as well as composites for 3-D printing. The system is designed, built and tested for its ability to provide high tolerance thermopolymer pellets from a number of sizes capable of being used in a FGF printer. In addition, the chopping pelletizer is tested for its ability to chop multi-materials simultaneously for color mixing and composite fabrication as well as precise fractional measuring back to filament. The US$185 open-source 3-D printable pelletizer chopper system was successfully fabricated and has a 0.5 kg/hr throughput with one motor, and 1.0 kg/hr throughput with two motors using only 0.24 kWh/kg during the chopping process. Pellets were successfully printed directly via FGF and indirectly after being converted into high-tolerance filament in a recyclebot.

Tourism is the main economic sector in the Balearic Islands (Spain) and hotel housekeepers (HHs) are a large occupational group, in which stress is becoming a major issue. This study aims at exploring in-depth factors perceived as stressors by HHs and key-informants, and their effects on work-life balance (WLB). A qualitative design with phenomenological approach was used, conducting six focus groups with 34 HHs and 10 individual interviews with key-informants. Results were analyzed adopting the job demands-resources model and a gender perspective. High demands –e.g work overload, time pressure, physical burden...-, lack of enough resources and little control –derived from role conflict, unexpected events...- were the most important factors explaining HHs’ stress. Additionally, this imbalance was perceived as leading to health problems –mainly musculoskeletal disorders-. Working schedule was mentioned as a facilitator to WLB, whereas an imbalance between job demands and resources led to work-home conflict –preventing them from enjoying leisure time-. Multiple roles at work and at home increased their stress. HHs experienced their job as invisible and unrecognised. Regarding practical implications, our recommendations for hotel organization include reducing workload and increasing resources, which would improve the job demands-resource balance, diminish negative mental and physical outcomes and improve WLB.

Within the past decade, the aerospace engineering industry has evolved outside the constraints of using single, large, custom satellites. Due to increased reliability and robustness of commercial off the shelf (COTS) printed circuit board (PCB) components, missions instead have transitioned towards deploying swarms of smaller satellites. This approach significantly decreases the mission cost by reducing custom engineering and deployment expenses. Nanosatellites are able to be quickly developed with a more modular design at lowered risk. The Alpha mission at Cornell Space Systems Studio is fabricated in this manner. However, for the purpose of this mission, only one satellite was initially developed. This manuscript will discuss a systems engineering approach to the development of this satellite. As a disclaimer, this manuscript is written from a systems perspective. Therefore it will follow many subsystems from a wide range of functionalities. The research in this manuscript was kept broad with the hope to contribute to the mission as a system, through a range of development phases including validation and verification of existing methods. The two systems that will be primarily focused on are the Attitude Control System (ACS) of the carrier nanosatellite (cubesat), and the RF communications on the ex-creted picosatellites (chipsat). Milestones achieved in chipsat RF include chipsat to chipsat communication, chipsat to SDR ground station communication, packet creation, error correction, appending a preamble, and filtering the signal. Achievements on the ACS side included controller traceability/verification and validation, software rigidity tests, hardware endurance testing, Kane damper and IMU tuning. These developments matured the technological readiness level (TRL) of our systems in preparation for satellite deployment.

This study sought to improve the nutritional, functional and biochemical properties of pearl millet through malting and fermentation. Moringa oleifera leaf powder (MLP) was used as a fortificant. Mixture design was used to find optimal proportions for each of the components that yield a high protein and or low saturated fat content. Twelve mixtures with varying ratios of fermented, and malted pearl millet flour ranging between 30–65%, and MLP between 5–15% were generated through I-Optimal mixture design. The mixtures were wet-cooked, freeze-dried and analyzed for protein and fat content. The data obtained were fitted to a linear mixture model and the search for the optimum was done using Numerical Optimization for maximising protein and minimising saturated fat. The linear model was suitable for explaining variation for total protein and saturated fat with r2 of 0.50 and 0.51, respectively. Increasing MLP increased protein content. Two final formulations were generated through the optimization process. Pearl millet’s protein content increased by up to 22% while saturated fat decreased by up to 13%. Ash content increased by 75%. Polyphenol content and oxygen radical absorbance capacity increased by 80% and 25%, respectively. Final and peak viscosity were reduced by 90% and 95%, respectively.

This research investigates the relationship between the long-term orientation of top managers and their strategic decision-making processes, emphasising the comprehensiveness, speed, and inventiveness of decisions. The study employed structural equation modelling to look into the suggested connections using a sample of CEOs. The findings demonstrated a high and positive correlation between long-term orientation and decision comprehensiveness and speed, but not for decision creativity. The study contributes to the growing body of research on how human variations, such as temporal orientation, affect business outcomes and strategic decision-making. Moreover, the fact that a number of the results differed from those of other studies carried out in other contexts highlights how important it is to consider the industry and cultural environment when assessing these connections.

In this comprehensive review, we delve into the realm of intention recognition within the context of digital forensics and cybercrime. The rise of cybercrime has become a major concern for individuals, organizations, and governments worldwide. Digital forensics is a field that deals with the investigation and analysis of digital evidence in order to identify, preserve, and analyze information that can be used as evidence in a court of law. Whereas, Intention recognition is a subfield of artificial intelligence that deals with the identification of agents’ intentions based on their actions and change of states. In the context of cybercrime, intention recognition can be used to identify the intentions of cybercriminals and even to predict their future actions. Employing a meticulous six-step systematic review approach, we curated research articles from reputable journals and categorized them into three distinct modeling approaches: logic-based, classical machine learning-based, and deep learning-based. Notably, intention recognition has transcended its historical confinement to network security, now addressing critical challenges across various subdomains, including social engineering attacks, AI black box vulnerabilities, and physical security. While deep learning emerges as the dominant paradigm, its inherent lack of transparency poses unique challenges in the digital forensics landscape. We advocate for hybrid solutions that blend deep learning’s power with interpretability. Furthermore, we propose the creation of a comprehensive taxonomy to precisely define intention recognition, paving the way for future advancements in this pivotal field.

Polarimetry is used to determine the Stokes parameters of a laser beam. Once all four S0,1,2,3 parameters are determined, the state of polarisation is established. Upon reflection of a laser beam with the defined S polarisation state, the directly measured S parameters can be used to determine the optical properties of the surface, which modified the S-state upon reflection. Here, we demonstrate polarimetry for the determination of surface anisotropies related to birefringence and dichroism from different materials, which have a common feature of linear patterns of different alignments and scales. It is shown that polarimetry in the back-reflected light is complementary to ellipsometry and four-polarisation camera imaging.

Human adaptive responses to climate change occur at the local level, where climatic variability is experienced. Therefore analyzing vulnerability at the local level is important in planning effective adaptation options in a semi-arid environment. This study was conducted to assess vulnerability of Maasai pastoralist communities in Kajiado County, Kenya to climate change by generating vulnerability index for the communities. Data was collected using questionnaires that were administered to 305 households in the five different administrative wards (Oloosirkon/Sholinke, Kitengela, Kapetui North, Kenyawa-Poka and Ilmaroro) in Kajiado East. Vulnerability was measured as the net effect of adaptive capacity, sensitivity and exposure to climate change. Principal Component Analysis (PCA) was used to assign weights to the vulnerability indicators used for the study and also to calculate the household vulnerability index. A vulnerability map was produced using the GIS software package ArcGIS 10.2. Results showed that gender of household head, age of household head, educational level, access to extension agents, herd size, livestock diversity and access to credit facility influenced vulnerability of the Maasai pastoralists to climate change in Kajiado East. The result showed that the most vulnerable communities with the highest negative vulnerability index value are Ilpolosat (-2.31), Oloosirikon (-2.22), Lenihani (-2.05), Konza (-1.81) and Oloshaiki (-1.53). The communities with the highest positive vulnerability index values were Kekayaya (4.02), Kepiro (3.47), Omoyi (2.81), Esilanke (2.23), Kisaju (2.16) and Olmerui (2.15). We conclude that provision of basic amenities such as good roads and electricity; access to extension agents, access to credit facilities and herd mobility will reduce vulnerability of Maasai pastoralists in Kajiado east to climate change and variability.

The two-parameter distribution introduced by Kumaraswamy (1980) is a very flexible alternative to the Beta distribution with the same (0,1) support. Originally proposed in the field of hydrology, it has subsequently received a good deal of positive attention in both the theoretical and applied statistics literatures. Interestingly, the problem of testing formally for the appropriateness of the Kumaraswamy distribution appears to have received little or no attention to date. To fill this gap, in this paper we apply the “biased transformation” methodology proposed by Raschke (2009) to several standard goodness-of-fit tests based on the empirical distribution function. A simulation study reveals that these (modified) tests perform well in the context of the Kumaraswamy distribution, in terms of both low size distortion, and respectable power. In particular, the “biased transformation” Anderson-Darling test dominates the other tests that are considered.

Purpose: This study evaluates the performance of the Early Intervention Physiotherapist Framework (EIPF) for injured workers. This study provides a proper follow-up period (3 years) to examine the impacts of the EIPF program on injury outcomes such as return to work (RTW) and time to RTW. This study also identifies the factors influencing the outcomes. Methods: The study was conducted on data collected from compensation claims of people who were injured at work in Victoria, Australia. Injured workers who commenced their compensation claims after the first of January 2010 and had their initial physiotherapy consultation after the first of August 2014 are included. To conduct the comparison, we divided the injured workers into two groups: physiotherapy services provided by EIPF-trained physiotherapists (EP) and regular physiotherapists (RP) over the three-year intervention period. We used three different statistical analysis methods to evaluate the performance of the EIPF program. We used descriptive statistics to compare two groups based on physiotherapy services and injury outcomes. We also completed survival analysis using Kaplan-Meier curves in terms of time to RTW. We developed univariate and multivariate regression models to investigate whether the difference in outcomes achieved after adjusting for significantly associated variables. Results: The results showed that physiotherapists in the EP group on average dealt with more claims (over twice as many) than those in the RP group. Time to RTW for the injured workers treated by the EP group was significantly lower than for those who were treated by the RP group, indicated by descriptive, survival and regression analyses. Earlier intervention by physiotherapists led to earlier RTW. Conclusion: This evaluation showed that the EIPF program achieved successful injury outcomes three years after implementation. Motivating physiotherapists to intervene earlier in the recovery process of injured workers by initial consultation helps to improve injury outcomes.

The study sought to determine solar irradiation in Homa Bay County which can be tapped and utilized in improving lives of residents of the region by converting the solar thermal energy in Home Bay to other forms of energy such as electric form, mechanical form and light. The study was done by assessing the local atmospheric conditions which included sunshine duration data and air temperature records for the period of two years and the data obtained subjected to statistical analysis to determine the localized characteristics of the resource. The characteristics that were examined include; seasonal and annual power expectations as well as resource reliability. The solar irradiance of Home County was found to be 768.0 W/m².

Background: Cardiometabolic risk factors (CRFs) are significant health concerns among adults with overweight and obesity. Resistance training (RT) is known to manage CRFs, but the impact of moderate-frequency RT (two to three times weekly) remains unclear. Methods: We conducted a systematic review and meta-analysis of randomized controlled trials (RCTs) comparing moderate-frequency RT with non-exercise control or usual care in overweight and obese adults. Searches were performed in PubMed, Web of Science, EMBASE, and Cochrane Library up to February 2024, following the PRISMA 2020 guidelines. Eligible studies included non-athletic adults (BMI ≥ 25) aged 18 years or older, with RT interventions lasting 7 weeks or longer. Results: Fifteen RCTs were included. Moderate-frequency RT significantly reduced systolic blood pressure by -4.66 mmHg (95% CI -9.34 to 0.02, p=0.01) and mean arterial pressure by -6.48 mmHg (95% CI -10.63 to -2.33, p=0.002) compared to controls. Additionally, RT significantly lowered fasting insulin levels by -12.52 mmol/L (95% CI -24.17 to -0.88, p=0.04) and HOMA-IR by -1.49 (95% CI -1.63 to -1.35, p＜0.00001). Improvements were more pronounced in participants with dietary control. Conclusion: Moderate-frequency RT effectively improves CRFs in overweight and obese adults, suggesting its potential as a beneficial intervention for this population. PROSPERO registration number: CRD42022343167.

The standard of care measures for kidney function, proteinuria, and serum creatinine (SCr) are poor predictors of early stage kidney disease. Measures that can detect chronic kidney disease in its earlier stages are needed to enable therapeutic intervention and reduce adverse outcomes of chronic kidney disease. We have developed the Kidney Injury Test (KIT) and a novel KIT Score based on the composite measurement and validation of multiple biomarkers across a unique set of 397 urine samples. The test is performed on urine samples that require no processing at the site of collection and without target sequencing or amplification. We sought to verify that the pre-defined KIT test, KIT Score, and clinical thresholds correlate with established chronic kidney disease (CKD) and may provide predictive information of early kidney injury status above and beyond proteinuria and renal function measurements alone. Statistical analyses across six DNA, protein, and metabolite markers were performed on a subset of residual spot urine samples with CKD that met assay performance quality controls from patients attending the clinical labs at the University of California, San Francisco (UCSF) as part of an ongoing IRB approved prospective study. Inclusion criteria included selection of patients with confirmed CKD and normal healthy controls; exclusion criteria included incomplete or missing information for sample classification, logistical delays in transport/processing of urine samples or low sample volume, and acute kidney injury. Multivariate logistic regression of kidney injury status and likelihood ratio statistics were used to assess the contribution of the KIT Score for prediction of kidney injury status and stage of CKD as well as assess the potential contribution of the KIT Score for detection of early stage CKD above and beyond traditional measures of renal function. Urine samples were processed by a proprietary immunoprobe for measuring cfDNA, methylated cfDNA, clusterin, CXCL10, total protein, and creatinine. The KIT Score and stratified KIT Score Risk Group (High versus Low) had a sensitivity and specificity for detection of kidney injury status (healthy or CKD) of 97.3% (95% CI: 94.6%–99.3%) and 94.1% (95% CI: 82.3%–100%). In addition, in patients with normal renal function [eGFR ≥ 90], the KIT Score clearly identifies those with predisposing risk factors for CKD, which could not be picked up by eGFR or proteinuria (p < 0.001). The KIT Score uncovers a burden of kidney injury that may yet be incompletely recognized, opening the door for earlier detection, intervention and preservation of renal function.

Background: Smoking is disproportionately prevalent among Aboriginal and Torres Strait Islander Australian peoples, with 39% of Indigenous Australians aged over 15 years smoking daily. Efforts to reduce this high prevalence include culturally focused media campaigns, designed using community consultation, highlighting the need to determine how such health messaging is received by smokers. This study aimed to examine Indigenous Australian smokers’ reactions to a culturally focused anti-smoking mass media campaign—'Give up Smokes’. Methods: Intercept surveying across health services and events used recorded demographics, smoking status, quit attempts, smoking health effects, anti-smoking campaign recall, social support, and campaign reactions. Participants rated campaign images in five domains: 1) whether it made them stop and think; 2) personal relevance; 3) believability of design and message; 4) prompting concern about smoking; and 5) motivation towards quitting. Cluster analysis was used to segment smoker types. Results: Smoking health effects knowledge was high, and did not differ by quit readiness, attempts, or social support. Cessation support access was higher among those with greater readiness to quit. Social smoking behaviour and confidence to support others quitting did not significantly differ between participants, however importance of others quitting did. Quit readiness, attempts, and social support were associated with reaction to campaign design, but not message recall. Four types of smokers were described, using smoking characteristics, who differed in campaign message reactions. Conclusions: Strategies using campaign-exposed smoker characteristics to inform culturally focused health promotion are discussed in relation to four identified types of smokers.

Initially introduced almost thirty years ago for the express purpose of providing electronic warfare systems the capabilities to detect, characterize, and identify radar emitters, Specific Emitter Identification (SEI) has recently received a lot of attention within the research community as a physical layer technique for securing Internet of Things (IoT) deployments. This attention is due in large part to SEI’s demonstrated success in passively and uniquely identifying wireless emitters using traditional machine learning and the success of Deep Learning (DL) within the natural language processing and computer vision areas. SEI exploits distinct and unintentional features present within an emitter’s transmitted signals. The existence of these distinctive and unintentional features is attributed to slight manufacturing and assembly variations that exist within and between the components, sub-systems, and systems that comprise an emitter’s Radio Frequency (RF) front end. Although sufficient to facilitate SEI, these features do not hinder normal operations such as detection, channel estimation, timing, and demodulation. However, despite the plethora of SEI publications, it has remained largely a focus of academic endeavors that primarily focus on proof-of-concept demonstration and little to no use in operational networks for various reasons. The focus of this survey is a review of SEI publications from the perspective of its use as a practical, effective, and usable IoT security mechanism, thus we use IoT requirements and constraints (e.g., wireless standard, nature of their deployment) as a lens through which each reviewed paper is analyzed. Previous surveys have not taken such an approach and have only used IoT as motivation, a setting, or a context. In this survey, we consider operating conditions, SEI threats, SEI at scale, publicly available data sets, and SEI considerations that are dictated by the fact that it is to be employed by IoT devices or IoT infrastructure.

Heat-treated aluminum-silicon (Al-Si)-based alloys have dominated the cast lightweight alloy industry for several decades. However, in the last decade, Al-Ce-based alloys have shown promise in replacing Al-Si alloys due to their ability to remove the need for costly heat treatments. Since the properties of Al-Ce alloys depend on the as-cast microstructure, it is important to characterize the solidification kinetics of these alloys. Therefore, this study focused on characterizing the solidification of a near eutectic Al-Ce alloy with additions of Ni and Mn. The alloy was cast in a wedge mold configuration, resulting in cooling rates between 0.18 and 14.27 °C/s. SEM coupled with EDS and DSC techniques characterized the evolution rate of solid phases. The SEM/EDS data revealed that an Al10CeMn2 phase is present at higher cooling rates. At lower cooling rates, near the center of the casting, a proeutectic Al23Ce4Ni6 phase was more present. It was observed that up to 2.6 at. % of Mn was dissolved in this proeutectic Al23Ce4Ni6 phase, thereby removing a large portion of the available Mn for forming the Al10CeMn2 phase. DSC analysis showed differences in the samples' liquidus temperatures which is indicative of compositional variations. Inductively coupled plasma atomic emission spectroscopy (ICP-OES) and Scheil solidification simulations correlated the compositional differences to phase formation, which agreed with the SEM and DSC results. This experimentation provides insight into novel Al-Ce-Ni-Mn alloys and where their potential lies in industrial applications.

The chicken poultry business is becoming a crucial sector for our nation's sustainable food supply. To increase the health of chickens in coops and maybe increase the output of chicken meat and eggs, several innovations and inventions have been developed. Therefore, the creation of an automated chicken feeding device might be highly beneficial for the expansion of the poultry sector. This equipment may take the role of a worker in the chicken feeding process, solving the industry's labor shortage and introducing a semi-automatic procedure. The main processor of the automated chicken feeding system is a Raspberry Pi 3 Model B+. The machine consists of five main components: a Raspberry Pi with an amplifier that makes noise to draw the attention of free-range chickens, a Raspberry Pi with a pi camera that counts and detects the chickens, a Raspberry Pi with a servomotor that moves the food from storage to a container, a Raspberry Pi with a load cell that controls the number of feeds to avoid waste on foods, and a Raspberry Pi with a temperature sensor that monitors the food's freshness. This enhances the coop's atmosphere while lowering labor costs, conserving food, and ensuring that the chickens are fed on time. It also regulates the temperature sensor to ensure that the chicken food is fresh and prevents food from becoming polluted by insects and chicken excrement.

Reducing meat consumption is better for the environment. Unfortunately, commercial plant-based meat substitutes are often more expensive than meat and thus have not seen widespread adoption. This paper analyzes commercially-available spirulina, soy, pea, and brown rice protein isolates characteristics to provide data for non-meat protein cost reductions. Thermal and rheological properties, viscosity, density, and particle size distribution are analyzed for further study on alternative protein-based food processing. Differential scanning calorimetry analysis produced dry amorphous-shaped curves and paste curves with a more distinct endothermic peak. Extracted linear temperature ranges for processing in food production for spirulina was 70-90ºC; soy protein was 87-116ºC; pea protein was 67-77ºC; and brown rice protein was 87-97ºC. Viscosity analysis determined each protein material was shear-thinning and that viscosity increased with decreased water concentration, with rice being an exception to the latter trend. The obtained viscosity range for spirulina was 15,100-78,000cP; soy protein was 3,200-80,000cP; pea protein was 1,400-32,700cP; and brown rice protein was 600-3,500cP. The results indicate that extrusion is a viable method for further processing of the protein isolates as this technique has a large temperature operating range and variable screw speed. Data provided here can be used to make single or multi-component protein substitutes.

Recent legalization and normalization of euthanasia through the government program of medical assistance in dying (MAiD) is impacting Canada's population dynamics and is now the fifth leading cause of death. Ongoing proposals suggest expanding MAiD eligibility to mental illness. A knowledge gap exists to determine to what degree this expansion of MAiD may exacerbate the existing challenges associated with an aging population and declining birth rates. It may also complicate meeting national population targets of 100 million by 2100 set by the Century Initiative. To fill these knowledge gaps, this study conducts a comprehensive evaluation of the prevalence of mental illness in Canada. The results show that if MAiD is expanded to mental disorders under the high MAiD scenario by mid-century it will impact about 12.3% of the population. The low MAiD scenario projects an increase from 45,786 to 227,024 additional deaths/year. The likely scenario shows MAiD growing from 214,499 to approximately 896,312 by mid-century. Thus, if MAiD is expanded to mental illness under the likely scenario, more than half a million additional immigrants will be needed per year. These results emphasize the importance of integrating immigration policies with MAiD practices to ensure demographic stability and achieve long-term population objectives.

2014 marked the first emergence of avian influenza A(H5N8) in Jeonbuk Province, South Korea, which then quickly spread worldwide. In the midst of the 2020-21 H5N8 outbreak, it spread to domestic poultry and wild waterfowl shorebirds, leading to the first human infection in Astrakhan Oblast, Russia. Despite being clinically asymptomatic and without direct human-to-human transmission, the World Health Organisation stressed the need for continued risk assessment given the nature of Influenza to reassort and generate novel strains. Given its promiscuity and spread to humans, the urgency to understand the mechanisms of possible species jumping to avert disastrous pandemics is increasing. Addressing the epidemiology of H5N8 and its mechanisms of species jumping and its implications, mutational and reassortment libraries can potentially be built, allowing them to be tested on various models complemented with deep-sequencing and automation. With the knowledge on mutational patterns, cellular pathways, drug resistance mechanisms and effects of host proteins can allow better preparedness against H5N8 and other influenza A viruses.