Transitional waters are fragile ecosystems with high ecological values, representing the breeding and resting sites for rare and threatened species. They deserve particular concern for protection, undergoing numerous threats from anthropogenic nature. The present review aims to analyze the recent literature on Aphanius fasciatus, nowadays considered one of the most strictly estuarine-dependent fish species, and as such affected by the degradation of lagoon habitats, and to discuss its suitability as sentinel species of the quality of transitional water environments. The analysis and discussion highlight the potential applicability of the molecular, cellular, and physiological responses of this species as diagnostic tools for detecting the subtle effects induced by environmental pollution on the biota in transitional water environments. Moreover, the suitability of the responses of this species is suggested in the wider framework of the One Health Perspective which considers human and animal health and the environmental state highly interconnected, sharing common aspects. To date, omics technologies show very great potential in reacquiring novel knowledge on the responses of the organisms to environmental changes and to the alterations of the environmental health status. Therefore, considering the relevant potential of this species as sentinel species, many efforts are needed in the next future to improve the quantity and quality of the -omics tools that refer to A. fasciatus.

We investigated the biomechanical behaviour of different fixations of the tibial posterior malleolus (TPM), simulating distinct situations of involvement of the tibiotalar articular surface (TTAS) through a finite element model (FEM). A 3D computer-aided design model of the left ankle was obtained. The materials used were divided according to their characteristics into ductile and non-ductile, and all materials were assumed to be linear elastic, isotropic, and homogenous. Three different fracture lines of the TPM were defined, with sagittal angles of 10º, 25º, and 45º. For biomechanical comparison, different constructions using a trans-syndesmotic screw (TSS) only (Group T), a one-third tubular plate only with (Group PT) and without (Group PS) a TSS, and a locked compression plate with (Group LCPT) and without (Group LCPS) a TSS were tested. FEM was used to simulate the boundary conditions of vertical loading. Load application regions were selected in the direction of the 700N Z axis, 90% on the tibia and 10% on the fibula. Data on the displacement and stress in the FEM were collected, including the total principal maximum (MaxT) and total principal minimum (MinT) for non-ductile materials, total displacement (desT), localized displacement at the fragment (desL), localized displacement at syndesmosis (desS), and Von Mises equivalent stress for ductile materials. The data were analyzed using ANOVA and multiple comparison LSD tests were used. For TPM fractures with a sagittal angles 10º and 25º, desL in the PT and LCP groups was significantly lower, as well as Von Mises stress in Group LCPT in 10º, and PT and LCPT groups in 25º. TPM fractures with a sagittal angle of 45º, desL in the LCP group and Von Mises stress in Group LCPS and LCPT was significantly lower. We found that any TPM fracture may indicate instability of the distal tibiofibular syndesmosis, even when the fragment is small. Our study showed that in fragments involving 10% of the TTAS, the use of a TSS is sufficient, but when the involvement is greater than 25% of the TTAS, either non-locked or locked plate must be used to buttress the TPM. In posterior fragments affecting 45% or more of the TTAS, the use of a locking plate is recommended.

During the COVID-19 pandemic, the spread of the SARS-CoV-2 virus forced many individuals to confront their mortality and worry about losing loved ones also because social distancing policies often made it impossible to say goodbye. Those not directly experiencing loss were inundated with information about COVID-19-related deaths through various media, leading to vicarious grief. This study aims to explore the long-term effects of direct and vicarious mourning on people's mental health during the COVID-19 pandemic. A sample of 171 adults (65% female) aged 19 to 66 years (mean age = 25.8, SD = 8.57) voluntarily participated in an online survey assessing self-reported psychological measures of complicated grief, anxiety, stress, depression, dispositional neuroticism, and situational anxiety using the Fear of COVID-19 Scale. MANOVA tests revealed that individuals experiencing direct mourning had extremely severe scores for anxiety, stress, and fear of COVID-19, while those without personal losses had moderate scores. Participants reporting high media exposure had higher scores for depression and stress. In line with Terror Management Theory, the study supported that people during the COVID-19 pandemic engaged more in proximal defenses than distal ones, taking health-protective measures, experiencing increased anxiety levels toward SARS-CoV-2 infection, and feeling more distressed. Additionally, vicarious mourning was more strongly associated with depression due to emotional empathy with others. The discussion also addresses the strengths and limitations of the study.

Uterine Tumor Resembling Ovarian Sex Cord Stromal Tumor (UTROSCT) is a rare uterine mesenchymal neoplasm, which resembles ovarian sex cord tumors of the ovary. Although, in general, UTROSCT exhibits benign behavior with a favorable prognosis, this neoplasm is nonetheless classified as being of an uncertain ma-lignant potential, given its low rate of recurrence and the fact that it rarely pro-duces metastases (lymph nodes, epiploic appendix, omentum, small bowel, subcutaneous, lungs). Its histogenesis too is uncertain. Typically, UTROSCT oc-curs in peri-menopausal or menopausal women but can sometimes be observed in young women. Usually, this neoplasm can be found in the uterine corpus as a nodular intramural lesion, less frequently submucosal, subserosal or poly-poid/intracavitary. UTROSCT can cause abnormal bleeding, pelvic pain, enlarged uterus, mass sensation, but sometimes it is found purely by chance. This neo-plasm can be considered polyphenotypic on morphological, immunohistochem-ical, and genetic analyses. Generally, on microscopic examination, UTROSCT shows a predominant pattern of the cords, nests, and trabeculae typical of sex cord tumors of the ovary while, immunohistochemically, it is characterized by a co-expression of epithelial, smooth muscle, and sex cord markers. The aim of this review is to report clinical and pathological data and genetic alterations to estab-lish its impact on the prognosis and management of patients affected by this rare entity.

Bicuspid aortic valve(BAV) is a common congenital heart defect often associated with ascending aorta dilation. Current guidelines suggest surgical intervention for diameters ≥45mm in conjunction with surgical aortic valve replacement(SAVR). However, the optimal management of ascending aortas measuring 40-44mm remains controversial. Objectives: This study aims to evaluate the evolution of aortic diameter in patients with BAV and ascending aorta diameters between 40 and 44 mm undergoing AVR, assessing whether a conservative approach is justified. Methods: We conducted a retrospective observational study, analyzing 88 BAV patients who underwent SAVR between January 2012 and December 2018. Patients were divided into two groups based on preoperative ascending aorta diameters: <40 mm (Group 1, n=15) and ≥40 and <45 mm (Group 2, n=11). Follow-up of at least 5 years included aortic dilation rates, survival, and reoperation rates. Results: No significant differences were observed in aortic dilation between the two groups during follow-up, with overall annual dilation rates of 0.2±0.07mm/year. Survival rates were 86.3% for Group 1 and 81.9% for Group 2, with no reoperations required in either group. Conclusions: Patients with BAV and ascending aorta diameters of 40-44 mm do not require prophylactic aortic replacement during AVR, provided they undergo regular follow-up. These findings support current guidelines advocating conservative management for ascending aorta diameters in this range. However, in younger patients or those nearing the 45 mm threshold, surgical replacement may still be considered to preempt future complications.

Mesothelin is a protein that is expressed in the mesothelial cell lining in the pleura, peritoneum, and pericardium. The gene of mesothelin encodes a precursor protein that is processed to yield mesothelin, which is attached to the cell membrane by a glycophosphatidylinositol linkage and a shred fragment named the megakaryocytic-potentiating factor. The biological functions of this substance in normal cells are still unknown. Experimental studies on knockout mice suggest that this substance does not play an important role in development and reproduction. In contrast, it has been observed that mesothelin is produced in abnormal amounts in several malignant neoplasms, such as mesotheliomas and pancreatic adenocarcinomas. Given that mesothelin is overexpressed in many solid tumours and has antigenic properties, this molecule could be considered a tumour marker or an antigenic target for many malignancies. Many molecular studies also have demonstrated that mesothelin is overexpressed in serous ovarian carcinomas and may bind to ovarian cancer antigen Ca-125, favouring the spread of the tumour in the abdominal cavity. 3 Here, we discuss the current knowledge of mesothelin and focus on its role in clinical and pathological diagnoses as well as its impact on the prognosis in serous ovarian carcinomas. We also briefly discuss the latest progress of mesothelin-targeting therapies for this aggressive and lethal neoplasm.

In this paper, by extending some results of informational genomics, we present a new randomness test based on the empirical entropy of strings and some properties of repeatability and unrepeatability of substrings of certain lengths. We give the theoretical motivations of our method and some experimental results of its application to a wide class of strings: decimal representations of real numbers, roulette outcomes, logistic maps, linear congruential generators, quantum measurements, natural language texts, and genomes. It will be evident that the evaluation of randomness resulting from our tests does not distinguish among the different sources of randomness (natural, or pseudo-casual).

A topological quantum interplay between the magnetic flux and the mass has been investigated, for the case of an electron, by evaluating a gauge-invariant phase factor (a Wilson loop) linked to the electromagnetic gauge field of the particle. In particular, from this phase factor and the quantization of the magnetic flux variations, a relationship between the mass at rest of the electron and its self-energy , arising from radiative corrections, has been obtained also within a QED approach. Besides, a formulation of an energy scale comparable to the energy at rest of an electron-positron pair is proposed. Remarkably, a reckoning of the Bohr energy of a W⁺ W^- pair is compatible with constants and parameters usually employed within the electroweak theory and comparable to the energy at rest of an electron-positron pair.

The learning equations of an ANN are presented, giving an extremely concise derivation based on the principle of backpropagation through the descendent gradient. Then, a reflection is developed on the dual attention network that applies the learning equations and coordinates subnetworks toward purposeful behaviors. Speculation is made on possible developments of functionalities that could provide additional skills and at the same time shed light on competencies typical of ``natural intelligence".

Background: Very low-calorie ketogenic diet (VLCKD) is associated with improvement of metabolic and cardiovascular disorders. We aimed to evaluate the effects of VLCKD in patients with Cushing’s disease (CD) as adjunctive therapy to treatment for primary disease. Methods: We evaluated clinical, hormonal and metabolic parameters in 15 patients with CD and 15 controls at baseline and after 1 week and 3 weeks of VLCKD and further 2 weeks of low-carbohydrate ketogenic diet (LCKD). Results: After 5 weeks of diet a significant decrease in BMI (p=0.002), waist circumference (WC) (p=0.024), systolic (p=0.015) and diastolic blood pressure (p=0.005), ACTH (p=0.026), cortisone (p=0.025), total (p=0.006) and LDL cholesterol (p=0.017), triglycerides (p=0.016), alkaline phosphatase (p=0.008) and a significant increase in HDL cholesterol (p=0.017), vitamin D (p=0.015) and oral disposition index (Dio)(p=0.004) was observed in CD. A significant decrease in BMI (p=0.003), WC (p=0.002), systolic (p=0.025) and diastolic (p=0.007) blood pressure and total cholesterol (p=0.026) and increase in HDL cholesterol (p=0.001) and DIo (p<0.001) was observed in controls. Conclusions: The current study confirms that ketogenic diet is effective in improving metabolic disorders and shows that a nutritional approach may be combined with conventional CD therapy in order to improve metabolic and cardiovascular comorbidities.

Keywords: Cocoa value chain; Fair trade; Chocolate; Sustainable development; SDGs

Background: The concept of Quality of Work Life (QWL) has been built multidimensionally through social reproduction; it is impacted by the perceptions of each individual and by the relationship between workers and the work environment. Objective: to analyze the Work Process and QWL of assisting nurses in public health. Methods: Research in a critical paradigm, descriptive, exploratory with a qualitative approach. The population corresponds to Nurses who work in care work. Semi-structured guiding questions were applied and were analyzed with content analysis. Results: seven participants declared female; all Chilean; seven are young adults; six singles; only one has children, and one has a person dependent on her care; six are heads of household, and five receive help with housework. All have a nursing degree, five have a diploma, but none have a postgraduate. Work Process has three subcategories: work object, instrument, organization, and work conditions; the QWL category has six subcategories: definition and perception of QWL, QWL potentiating factors, QWL exhausting factors, QWL improvement strategies, the emotional burden associated with QWL, and Health problems. Conclusions: In this way, the lifestyle built by the assistance in the health area has repercussions on the quality of life and health in general.

The management of waste cooking oil (WCO) often poses significant challenges. Improper disposal of WCO results in negative environmental impacts and economic losses. However, from a circular economy perspective, WCO can be recycled and used as a sustainable feedstock for numerous industrial products, replacing virgin vegetable oils. This approach enables the recovery of resources while simultaneously addressing the problem of WCO disposal. By employing a multi-criteria decision analysis (MCDA) approach, the study assesses three alternative recycling pathways for WCO used as a feedstock in the production of A1) biodiesel, A2) biolubricant, and A3) biosurfactant. The aim is to identify the optimal alternative, taking into account environmental, economic, and technical factors. The procedure involved a team of chemical engineers working in the WCO recycling sector who were selected as decision-makers. The 'priority scale' combined with the Paired Comparison Technique was employed as a weighting method to evaluate the selected criteria. The results revealed that the decision-makers considered environmental sustainability as the most crucial evaluation criterion, followed by the economic criterion. In contrast, the aspect of process management was deemed less significant. Among the compared alternatives, utilizing WCO as a feedstock for biosurfactant production was assessed as the optimal WCO recycling solution. This alternative not only demonstrated the lowest coefficient variation but was also deemed the most favourable option. Biolubricant production was determined to be the second-best alternative. The adopted MCDA approach proved to be a reliable and effective tool, enabling the clear identification of the preferred WCO recycling alternative among those assessed. This was achieved through the utilization of the decision-makers' expertise and knowledge.

Undisturbed ground temperature (UGT), thermal conductivity (TC) and heat capacity (HC) are essential parameters for the design of borehole heat exchanger (BHE) and borehole thermal energy storage systems. However, field methods to assess the thermal state and properties of the sub-surface are costly and time consuming. Moreover, HC is often not evaluated but arbitrarily selected from literature considering the geological materials intercepted by boreholes. Therefore, this work aims at proposing a field heat tracing method to infer the thermal diffusivity (TD) and HC with assumption of natural transient heat conduction in the subsurface. Empirical equations were developed to reproduce a UGT profile measured along a BHE. Experimental coefficients are found with a non-linear least square solver optimization and used to calculate the damping depth and TD. Subsequently, the TD is used to evaluate HC considering TC obtained from a thermal response test (TRT). Results from this proposed heat tracing method were verified and validated against a set of TRT results and oscillatory TRT analysis using a field dual probe concept to infer HC. The example here described highlights the advantages and novelty of this fast and simple field method relying only on a single UGT profile measured before a TRT.

Starting from the environmental issues related to global warming, climate change and reduction of greenhouse gas emissions, this review paper describes how CO₂ recycling can represent a challenging strategy suitable to explore new concepts and opportunities for catalytic and industrial development. In this view, the production of dimethyl ether (DME) from catalytic hydrogenation of CO₂ appears as a viable technology, able to meet also the ever-increasing need for alternative environmentally-friendly fuels and energy carriers. Basic considerations on thermodynamic aspects controlling DME production from CO₂ are presented, then summarizing the main catalytic systems developed in such a field. Special attention is paid on the role assumed during last years by zeolite-based systems, either in the methanol-to-DME dehydration step or in the one-pot CO₂-to-DME hydrogenation. On the whole, the productivity of DME results significantly to be dependent on several catalyst features, linked not only to the metal-oxide phase responsible for CO₂ activation/hydrogenation, but also to specific properties of the zeolites (i.e., topology, porosity, surface area, acidity, interaction with active metals, distributions of metal particles, …) influencing activity and stability of hybridized bifunctional heterogeneous catalysts.

An extension of the Stoney formula for the case of a back side metallized 8” silicon taiko wafer has been developed, in the elastic regime, within the frame of the theory of elasticity. A good correlation between the calculated warpage, determined by the stress released by a given back side metallization (BSM), and the corresponding experimental warpages of the same thick metal layers deposited on an 8” silicon taiko wafer provides evidences of the correctness of the developed theory. This development suggests the possibility to extend this approach to the case of 8” taiko wafers based on a wide band gap semiconductor such as silicon carbide (SiC).

Clean production of renewable fuels is a great challenge of our scientific community. Iridium complexes have demonstrated a superior catalytic activity in the water oxidation (WO) reaction, which is a crucial step in water splitting process. Herein we have used a defective zirconium MOF with UiO-66 structure as support of a highly active Ir complex based on EDTA with formula [Ir(HEDTA)Cl]Na. The defects are induced by the partial substitution of tereftalic acid with smaller formiate groups. Anchoring of the complex occurs through a post-synthetic exchange of formiate anions, coordinated at the zirconium clusters of the MOF, with the free carboxylate group of the [Ir(HEDTA)Cl]-complex. The modified material was tested as heterogenous catalyst for the WO reaction by using Cerium Ammonium Nitrate as sacrificial agent. Although TOF and TON values are comparable to those of other iridium heterogenized catalysts, the MOF exhibits iridium leaching not limited at the first catalytic run, as usually observed, suggesting a lack of stability of the hybrid system under strong oxidative conditions.

A symbolic analysis of Archimedes’ periodical number system is developed, from which a natural link emerges with the modern positional number systems with zero. After the publication of Fibonacci’s Liber Abaci, the decimal Indo-Arabic positional system was the basis of the algorithmic and algebraic trend of modern mathematics, but even if zero plays a crucial role in algebra and mathematical analysis, zeroless positional systems show the same capability of producing efficient arithmetical algorithms based on operation tables over digits. The crucial role of digits is assessed, by considering a representation of numbers based on strings in lexicographic order. A new algorithm for the determination of decimal periods is presented,, by remarking the cruciality of this topic in number theory. Periods of ordinal numbers, and enumerations of recursive enumerability are shortly recalled. Concluding remarks are formulated about the deep relationship among numbers and information, which shed new light on a red line passing through the whole history of mathematics

Land-use planning review seems relatively lower in publication rate and in coverage of content. This review contributes its part in two dimensions. First, it assesses ability of the popularly growing bibliometric method in tracking the real contribution of publications. Then it summarizes developments in the land use planning literature in three themes - general literature path building, land use planning context, and development of methods. It is observed that bibliometric method rewards information carriage paper more than the original contributors. Key planning context gaps include detachment of the general goal-oriented objective formulations from the basic land use allocation theories and models and certain urban land use optimization objectives even contradict the original though of sustainable city. Key research frontiers include: linking basic land use allocation and utility theories in urban land use planning; shifting the current urban land use planning from spatial optimization to activities into optimizing flow resources to available spatial configurations; evaluating existing built environment for optimality; transferring knowledge from rural land-use planning to urban land use planning. In method development, the key frontier would be advancing the current loosely coupled methods into more integrated systems.

The preservation of the authenticity of a building artefact is a responsible practice. On the other side, the need to save the building artefact from the natural and anthropic degradation, to ensure the structural reliability to the different actions, to define an efficient maintenance program are big challenges, that involves the cooperation of several professionals, responsible use of innovative techniques and materials that are nowadays available. This paper focuses on a specific design approach for the rehabilitation works of ancient constructions in archaeological sites. The proposed conceptual design approach implies different steps that allow the optimization of the design at an increasing level of knowledge on the existing structures and their materials. The design procedure on historical constructions generally includes the following steps: the collection of data, the structural identification, hazard, and vulnerability analysis, damage and risk analysis, a cost-benefit analysis, so only at the end of the process, the final design is achieved. In the archaeological area, some important design aspects cannot be defined before the execution work phase, since some elements could be revealed and identified during work execution, as a consequence, the final design has been often optimized after all this information has been acquired. A studied case in the archaeological site of Pompeii is herein presented to prove the efficiency of the proposed approach.

Oestrogen receptor expression in breast cancer (BC) cells is a marker of high cellular differentiation and allows the identification of two BC groups (ER-positive and ER-negative) that, although not completely homogeneous, differ in biological characteristics, clinical behaviour and therapeutic options. The study, based on three publicly available EWAS datasets, focuses on the comparison between these two groups of breast cancer using an epimutation score. The score is calculated not only based on the presence of the epimutation but also on the deviation amplitude of the methylation outlier value. For each dataset, we performed a functional analysis based first on the functional gene region of each annotated gene (we aggregated the data per gene region TSS1500, TSS200, first-exon, body-gene identified by the information from the Illumina Data Sheet) and then we performed a pathway enrichment analysis through the REACTOME database based on the genes with the highest epimutation score. Thus, we blended our results and found common pathways for all three data sets. We found that a higher and significant epimutation score due to hypermethylation in ER-positive BC is present in the promoter region of the genes belonging to the SUMOylation pathway, the NOTCH pathway, the IFN-$\gamma$ signalling pathway and the deubiquitination protease pathway; while a higher and significant level of epimutation due to hypomethylation in ER-positive BC is present in the promoter region of the genes belonging to the ESR-mediated pathway. The presence of this state of promoter hypomethylation in the ESR-mediated signalling genes is consistent and coherent with an active signalling pathway mediated by oestrogen function in the group of ER-positive BC. SUMOylation and NOTCH pathways are associated with BC pathogenesis and have been found to play distinct roles in the two BC subgroups. We speculated that the altered methylation profile may play a role in regulating signalling pathways with specific functions in the two subgroups of ER-BC.

The Polynomial coefficient function, from the complex hyperspace Cⁿ in itself, is the function Fⁿ that provides the coefficients of the polynomial (x - a₁)(x - a₂)... (x-a_n). A proof of the fundamental theorem of algebra is given where the surjectivity of this function is obtained from a Recurrent Coefficient Equation.

The procedures for the extraction and separation of lipids and nutraceutics from microalgae using classic solvents have been used many times. However, these production methods usually require expensive and toxic solvents. Based on our studies involving the use of eco-sustainable methodologies and alternative solvents, we select ethanol (EtOH) and cyclopentyl methyl ether (CPME) for extracting bio-oil and lipids from algae. Different percentage of EtOH in CPME favors the production of an oil rich of SFA useful to production biofuel or rich of compounds bioactive. The proposed method for obtain a rich extract of saturated or unsaturated fatty acids from dry algal biomass is disclosed is eco-friendly and allows a good extraction yield. The method is compared both in extracted oil percentage yield and in extracted fatty acids selectivity to extraction by supercritical carbon dioxide.

Background: Patients with allergic rhinitis (AR) have bothersome symptoms that may assess using the visual analog scale (VAS). Asthma frequently is associated with AR. The present study investigated the role of VAS in children with newly-diagnosed AR. Methods: Parameters were VAS for nasal and asthma symptoms, and doctor’s perception of these diseases, medication use, and asthma comorbidity. Results: 67% of AR children had asthma. Severity of perceived nasal symptoms was associated with more intense asthma symptoms and doctor’s perception of disease severity (p<0.001 and p=0.02, re-spectively. Conclusions: Allergic rhinitis frequently is associated with asthma in child-hood. Symptom perception assessment using VAS is a simple tool for assessing their intensity. Moreover, the severity of nasal symptoms is associated with asthma symptom severity. Therefore, asthma should be carefully considered in AR children and require appropriate symptom perception assessment.

Background - Mandibular flexion (MF) is a complex biomechanical phenomenon, which involves a deformation of the mandible, due mainly to the contraction of the masticatory muscles, and can have numerous clinical effects. The main aim of the current systematic review is to highlight the different factors that can increase MF, to help clinicians, identify patients to whom they should pay more attention. As a secondary outcome, we wanted to analyze the preventive measures and suitable techniques to be adopted to minimize the negative effects of this phenomenon on oral fixed rehabilitations. Methods - The review, which was carried out in accordance with the “Preferred Reporting Items for Systematic reviews and Meta-Analyses” (PRISMA) flowchart, was recorded in the “International Prospective Register of Systematic Reviews” (PROSPERO). As research questions, “Patient/Population, Intervention, Comparison and Outcomes” (PICO) questions were employed. Using the ROBINS-I technique, the risk of bias in non-randomized clinical studies was evaluated. Results - The initial electronic search identified over 1300 potential articles, of which 54 studies were included in this systematic review. Information regarding the relationship between MF and individual factors, mandibular movements, impression-taking and fixed rehabilitations were obtained. Conclusions – The studies included in this systematic review showed that MF is greater during protrusive movements, in the posterior areas of the lower jaw, and in patients with brachial facial type, greater jaw length, small gonial angle and less density, length and bone surface of the symphysis. The biomechanical effects of mandibular flexion on fixed restorations are debated. Prospective clinical and radiological observational studies should be conducted to evaluate the potential short-, medium- and long-term consequences of MF.

The cold-pressed hempseed oil (HO) has been increasingly exploited in human diet for its excellent nutritional and healthy properties. However, it has a high content of polyunsaturated fatty acids (PUFAs) and chlorophylls, which inevitably accelerate its oxidative deterioration, especially in presence of light. In this scenario, the filtration technology may ameliorate the oxidative stability of the oil, with positive effects on its nutritional quality and shelf-life. Therefore, in this study, the oxidative stability and minor compounds of non-filtered and filtered HO (NF-HO and F-HO) were monitored over 12 weeks of storage in transparent glass bottles. F-HO showed a better hydrolytic and oxidative status than NF-HO during storage. As a result, F-HO displayed also a better preservation of total MUFA and PUFA in the autoxidation process. Filtration consistently reduced chlorophylls, thus, causing a variation of the natural color of HO. Accordingly, F-HO not only revealed an increased resistance to photooxidation but was also suitable for storage in clear bottles within 12 weeks. F-HO predictably showed lower carotenoids, tocopherols, polyphenols, and squalene compared to NF-HO. However, filtration appeared to play a “protective role” toward these antioxidants, which had lower degradation rates in F-HO than NF-HO for 12 weeks. Interestingly, the element profile of HO was not affected by filtration and remained stable during the study period. Overall, this study may be of practical use to both producers and marketers of cold-pressed HO.

Anatomy education plays a critical role in medical practice, and the level of anatomical knowledge among students and physicians significantly impacts patient care. This article presents a pilot project conducted by the University of Milan aimed at exploring the effectiveness of the Area9's Rhapsode platform, an intelligent tutoring system that uses artificial intelligence to personalize learning and collect data on mastery acquisition. The study focused on liver anatomy and employed a flipped classroom approach, incorporating adaptive learning modules and an interactive in-class session. The project's execution, outcomes and preliminary pedagogical considerations are discussed. The results demonstrated improved learning quality, positive repurposing of study time, enhanced metacognitive awareness among students, with most of students demonstrating conscious mastery of the materials and a clear understanding of their level of competence. This approach, by providing valuable insights into the potential of artificial intelligence-based adaptive learning systems in anatomy education, could address the challenges posed by limited teaching hours, shortage of anatomist and the need for individualized instruction, with recommendations for future research and the expansion of adaptive learning modules to other anatomical districts.

Late type II endoleak (T2EL) arising from internal iliac artery (IIA) network may occur after endovascular aortic repair (EVAR) of aortoiliac aneurysm and may require embolization if sac enlargement is demonstrated. When direct antegrade access to ipsilateral IIA is not achievable due to previous vessel coverage and/or embolization, access to the nidus can be challenging. We report a case of T2EL originating from IIA network causing iliac sac enlargement in a patient previously treated by EVAR for artoiliac aneurysm with IIA embolization and coverage, in which embolization of the nidus was performed through a percutaneous sheathless access to ip-silateral superior gluteal artery (SGA). A literature review dealing with all cases of percutaneous direct SGA access for retrograde embolization of T2EL arising from IIA after previous EVAR is also reported. The research was conducted on Pubmed database using keywords “superior glu-teal artery access,” “transgluteal embolization” and “retrograde embolization for type II endo-leak”. Related articles and references were screened for suitable articles.

The huge advancement of Internet web facilities as well as the progress in computing and algorithm development, along with current innovations regarding high-throughput techniques enables the scientific community to gain access to biological datasets, clinical data, and several databases containing billions of information concerning scientific knowledge. Consequently, during the last decade the system for managing, analyzing, processing and extrapolating information from scientific data has been considerably modified in several fields including the medical one. As a consequence of the mentioned scenario, scientific vocabulary was enriched by novel lexicons such as Machine Learning (ML)/Deep Learning (DL) and overall Artificial Intelligence (AI). Beyond the terminology, these computational techniques are revolutionizing the scientific research in drug discovery pitch, from the preclinical studies to clinical investigation. Interestingly, between preclinical and clinical research, the translational research is benefitting from computer-based approaches, transforming the design and execution of the translational research, resulting in breakthroughs for advancing human health. Accordingly, in this review article, we analyze the most advanced applications of AI in translational medicine, providing an up-to-date outlook regarding this emerging field.

Optical fiber sensors have become a widely-used tool to perform life-long monitoring of large structures. Different set-ups of sensors can be used to obtain information at different scopes. In this paper, the application of a portable Brillouin optical time domain analysis sensor applied to reinforced concrete beams is presented. The sensor is made up of a single-mode optical fiber applied to the structure that enables the measurement of tensile and compressive axial strain along the beams. The fiber is embedded into a concrete casting and fixed along the reinforcement bars so that a complete correlation can be obtained regarding strain and displacements in linear and non-linear flexural response. The use of four sensing fibers positioned along the beam's length at different vertical positions makes it possible to read the strain variation within the cross-section. In accordance with Bernoulli’s hypothesis, this allows curvature diagrams to be obtained across the structure. The measured curvature is used to set up the moment–curvature relationship, which highlights the possibility of the sensor monitoring structures continuously in space and time.

Seafood products are the main dietary source of n-3 polyunsaturated fatty acids (n-3 PUFA), which are essential for human health. However, due to the widespread use of processed fish products, the presence of these n-3 PUFAs may be subject to changes related to different processing methods. The aim of this study was to determine the fatty acid composition, with a focus on n-3 polyunsaturated fatty acids (n-3 PUFAs), in different processed fish and shellfish food of EU and non-EU origin purchased in supermarkets and ethnic food shops in Messina (Italy), using gas chromatography with flame-ionization detector (GC-FID). From the fatty acid profile, the atherogenic index (AI), thrombogenicity index (TI) and flesh-lipid quality index (FLQ) were determined: 0.13-1.04 (AI), 0.31-9.84 (TI) and 0.41-29.90 (FLQ). The percentages of saturated (SFA), monounsaturated (MUFA) and polyunsaturated (PUFA) fatty acids had the following ranges: 13.55-50.48%, 18.91-65.58%, 13.84-52.73%, respectively. All samples showed a good presence of PUFAs and, in particular, eicosapentaenoic (EPA, 20:5n-3) and docosahexaenoic acid (DHA, 22:6n-3) were the main n-3 polyunsaturated fatty acids (n-3 PUFA).

The use of interleaving material with viscoelastic properties is one of the most effective solutions to improve the damping capacity of CFRP laminates. Improving composite damping without threatening mechanical performance is challenging and the use of nanomaterials should lead to the target. In this paper, the effect of a nanostructured interlayer based on Graphite Nanoplatelets (GNPs) on the damping capacity and fracture toughness of CFRP laminates has been investigated. High-content GNP/Epoxy (70wt/30wt) coating was sprayed on the surface of CF/Epoxy prepregs at two different areal weight (10 and 40 g/m2) and incorporated at the middle-plane of a CFRP laminate. The effect of the GNP areal weight on viscoelastic and the mechanical behaviour of the laminates was investigated. Coupons with low-areal weight GNP interlayer showed a 25% increase in damping capacity with a trivial reduction of the elastic modulus. Moreover, a reduction in interlaminar shear strength (ILSS) and fracture toughness (both mode I and mode II) was observed in the composites with GNPs interlayer. GNPs alignment and degree of compaction reached during process were found as key parameters on material performances. By increasing the areal weight a mitigation on the mechanical performances drop was achieved (-15%).

Background: Myeloid sarcoma (MS), also known as granulocytic sarcoma or chloroma, is a rare disease entity characterized by the emergence of an extramedullary tumour which may be antecedent, coexisting or manifest secondarily to an ongoing malignancy of lymphoid origin. Owing to its low prevalence, scientific reports addressing this matter comprise mainly retrospective studies with a limited number of participants, rather low-quality research and only few case reports. Despite MS’s rarity, the need for enhancing diagnostic tools and refinement of therapeutic regimens is broadly recognised among physicians. Case summary: In this case series, we present the clinical histories of two patients diagnosed with MS. The former (Case 1) exhibited MS of the sternum alongside chronic myeloid leukemia (CML), while in case of the latter (Case 2) MS was the initial manifestation of a current acute myeloid leukemia (AML). Regardless of treatment institution comprising chemotherapy (CHTH) and radiotherapy (RT), the patient afflicted by CML did eventually pass due to cardiorespiratory insufficiency secondary to an infection, whereas the second one is in clinical remission up to this date, that is 16 months since MS had been diagnosed. Furthermore, a comprehensive analysis of previously reported cases was conducted which involves MS in patients with AML and CML. Conclusion: The objective of this report is to emphasize the heterogeneity among the clinical manifestations of MS, to underline the relevance of histopathological and molecular diagnostic tools in opting for the appropriate therapy and that, in spite of it occurring rather uncommonly, physicians should think of MS in presence of pathological masses in patients under risk of hematological malignancies.

Urological cancers include a spectrum of malignancies affecting organs of the reproductive and/or urinary systems, such as prostate, kidney, bladder, and testis. Despite improved primary prevention, detection and treatment, urological cancers are still characterized by an increasing incidence and mortality worldwide and although advances have been made toward understanding the molecular basis of these diseases, a complete insight of the pathogenic mechanisms is still a research challenge for defining safer pharmacological therapies and prognostic factors, especially for the metastatic stage of these neoplasms for which no effective therapies exist. Glyoxalases are enzymes that catalyzes the glutathione-dependent metabolism of cytotoxic methylglyoxal (MG), thus protecting against cellular damage and apoptosis. They are generally overexpressed in numerous cancers as a survival strategy by providing a safeguard through enhancement of MG detoxification. Increasing evidence suggest that glyoxalases, especially Glo1, would act as oncogenes in urological malignancies and be central to their initiation, growth and progression. In this review, we highlight the critical role of glyoxalases as regulators of tumorigenesis in the prostate through modulation of various critical signaling pathways, and provide an overview of the current knowledge on glyoxalases in bladder, kidney and testis cancers. We also discuss the promise and challenges for Glo1 inhibitors as future anti-PCa therapeutics and the potential of glyoxalases as biomarkers for PCa diagnosis.

The core components of regenerative medicine are stem cells with high self-renewal and tissue regeneration potentials. Adult stem cells can be obtained from many organs and tissues. NANOG, SOX2 and OCT4 represent the core regulatory network that suppresses differentiation-associated genes, maintaining the pluripotency of mesenchymal stem cells. The roles of NANOG in maintaining self-renewal and undifferentiated status of adult stem cells are still not perfectly established. In this study we define the effects of downregulation of NANOG in maintaining self-renewal and undifferentiated state in mesenchymal stem cells (MSCs) derived from subcutaneous adipose tissue (hASCs). hASCs were expanded and transfected in vitro with short hairpin Lentivirus targeting NANOG. Gene suppressions were achieved at both transcript and proteome levels. The effect of NANOG knockdown on proliferation after 10 passages and on the cell cycle was evaluated by proliferation assay, colony forming unit (CFU), qRT-PCR and cell cycle analysis by flow-cytometry. Moreover, NANOG involvement in differentiation ability was evaluated. We report that downregulation of NANOG revealed a decrease in the proliferation and differentiation rate, inducing cell cycle arrest by increasing p27/CDKN1B (Cyclin-dependent kinase inhibitor 1B) and p21/CDKN1A(Cyclin-dependent kinase inhibitor 1A) through p53 and regulate DLK1/PREF1. Furthermore, NANOG induced downregulation of DNMT1, a major DNA methyltransferase responsible for maintaining methylation status during DNA replication probably involved in cell cycle regulation. Our study confirms that NANOG regulates the complex transcription network of plasticity of the cells, inducing cell cycle arrest and reducing differentiation potential.

Abstract Eye health is crucial and the onset of diseases can reduce vision and affect the quality of life of patients. The main causes of progressive and irreversible vision loss include various pathologies such as cataracts, ocular atrophy, corneal opacity, age-related macular degeneration, uncorrected refractive error, posterior capsular opacification, uveitis, glaucoma, diabetic retinopathy, retinal detachment, undetermined disease and other disorders involving oxidative stress and inflammation. The eyes are constantly exposed to the external environment and, for this reason, must be protected from damage from the outside. Many drugs, including cortisonics and antinflammatory drugs have widely been used to counteract eye disorders. However, recent advances have been obtained via supplementation of patients with natural antioxidants and nutraceuticals. In particular, evidence has been accumulated that polyphenols (mostly deriving from Citrus Bergamia) represent a reliable source of antioxidants able to counteract oxidative stress accompanying early stages of eye diseases. Luteolin, in particular, has been found to protect foto-receptors thereby improving vision in many disease states. Moreover, a consistent anti-inflammatory response was found to occur when curcumin is used alone or in combination with other nutraceuticals. On the other hand, CoQ10 has been demonstrated to produce consistent effect in reducing ocular pressure thereby leding to protection in patients undergoing glaucoma. Finally, both grape seed extract rich in anthocyanosides and polynsatured fatty acids (PUFAs) seem to contribute in the prevention of retinal disorders. Thus, combination of nutraceuticals and anti-oxidants may represent the right solution for a multiaction activity in eye protection to be associated to current drug therapies, and this will be of potential interest in early stages of eye disorders.

Natural spa springs are diffused all over the world and their use in pools is known since ancient times. This review underlines the cultural and social spa context focusing on hygiene issues, public health guidelines and emerging concerns regarding water management in wellness or recreational settings. The question of the "untouchability" of therapeutic natural waters and their incompatibility with traditional disinfection processes is addressed considering the demand for effective treatments that would respect the natural properties. Available strategies and innovative treatments are reviewed, highlighting potentials and limits for a sustainable management. Alternative approaches comprise nanotechnologies, photocatalysis systems, advanced filtration. State of the art and promising perspectives are reported considering the chemical-physical component and the biological natural complexity of the spa water microbiota.

In the conservation of monumental heritage, the collection and utilization of information are of primary importance. The Heritage Building Information Modeling (HBIM) procedure harnesses the potential of three-dimensional models, offering significant advantages in accessing documentation, interoperability, multidimensionality of intervention design, cost evaluation and maintenance management. Attention here is focused on the Certosa di Pisa, a large historical complex built in the 14th century as a monastery of the Carthusian order, currently in a state of deterioration and in need of restoration and re-functionalization. The multifaceted nature of this monumental complex, with its intricate interplay of architectural elements spanning different historical periods and featuring diverse techniques, poses a significant challenge for structural safety assessment. This case study presents an opportunity to explore an HBIM approach to streamline the diagnostic process and facilitate the intervention design phase. The goal is achieved by utilizing an accurate 3D model enriched with data from multiple sources and automating certain operations for structural assessment. The usefulness of the HBIM methodology is highlighted as a valuable tool in the realm of Cultural Heritage structures for both technicians and scholars alike.

While the number of publications on wine and health is steadily increasing, ranging from molecular level to epidemiological studies, often with contradictory results, little attention has been given to an holistic approach. In this review some unusual concepts are considered, such as phytocomplex, vehicle and the Matrix effect. As an example, three mono/polyphenols present in wine, Tyrosol, Hydroxytyrosol and Resveratrol, have been selected and the consequences of respecting, disregarding or ignoring the Matrix effect are shown. Underestimation of the wine Matrix effect could lead to deceiving results, as in the case of de-alcoholized wine or wine-compound-based nutritional supplements,or in emphasizing a single component toxic activity, in this case alcohol, ignoring the specific protective action at molecular level of other compounds (polyphenols) present in the same Matrix. The dark side of Matrix effect is also discussed. It is suggested that specificity of wine should be always taken in consideration by public health Authorities.

The recent outbreak of a new Coronavirus has developed into a global pandemic with about 10,5 million reported cases and over 500,000 deaths worldwide. Our prospective paper reports an updated analysis of the impact that this pandemic had on the Italian agri-food sector during the national lockdown and discusses why and how this unprecedented economic crisis could be a turning point to deal with the overall sustainability of food and agricultural systems in the frame of the forthcoming European Green Deal. Its introductory part includes a wide-ranging examination of the first quarter of pandemic emergency, with a specific focus on the primary production, to be understood as agriculture (i.e. crops and livestock, and their food products), fisheries and forestry. The effect on the typical food and wine exports, and the local environment tourism segments is also taken into account in this analysis, because of their old and deep roots into the cultural and historical heritage of the country. The subsequent part of the paper is centered on strategic lines and research networks for an efficient socio-economic and territorial restart, and a faster transition to sustainability in the frame of a circular bio-economy. Particular emphasis is given to the urgent need of investments in research and development concerning agriculture, in terms of not only a fruitful penetration of the agro-tech for a next-generation agri-food era, but also a deeper attention to the natural and environmental resources, including forestry. As for the rest of Europe, Italy demands actions to expand knowledge and strengthen research applied to technology transfer for innovation activities aimed at providing solutions for a climate neutral and resilient society, in reference to primary production to ensure food security and nutrition quality. Our expectation is that science and culture return to play a central role in national society, as their main actors are capable of making a pivotal contribution to renew and restart the whole primary sector and agri-food industry, addressing also social and environmental issues, and so accelerating the transition to sustainability.

The effect of COVID-19 confinement regulations on air quality in the northwestern Alps is here assessed based on measurements at five valley sites in different environmental contexts. Surface concentrations of nitrogen oxides, ozone, particle matter, together with size, chemical, and optical (light absorption) aerosol properties, complemented by observations along the vertical column are considered. The 2020 concentration anomalies relative to previous years’ average are compared with the output of a machine learning algorithm accounting for weather effects and a chemical transport model, their difference being within 10–20 %. Even in the relatively pristine environment of the Alps, the «lockdown effect» is well discernible, both in the early confinement phase and in late 2020, especially in NOx concentrations (NO decreasing by >80 % and NO2 by >50 %). While ozone shows little variation, secondary aerosols increase due to enhanced transport from the neighbouring Po basin and coarse particles decrease due to missing resuspension by traffic and, in the city, to the shutdown of a steel mill. The NO2 vertical column density decreases by >20 %, whereas the aerosol profile is mainly influenced by large-scale dynamics, except a shallow layer about 500 m thick possibly sensitive to curtailed surface emissions.

Allogeneic hematopoietic stem cell transplantation (allo-HCT) is a potentially curative treatment modality, frequently applied in patients suffering from haematological malignancies. In the last two decades, there have been multiple randomised controlled trials (RCTs), review articles, and meta-analyses addressing the efficacy of rabbit anti-thymocyte globulin (r-ATG) as a graft-versus-host disease (GvHD) prophylaxis. Nevertheless, only a few aimed to compare the effectiveness of different r-ATG formulations. We performed a systematic literature review of articles published since 2017 to this day utilising PubMed, Scopus, Cochrane, and MEDLINE, with the main endpoints being prophylaxis of acute GvHD (aGvHD) and chronic GvHD (cGvHD). We subjected to scrutiny a total of 5 studies, of which 4 compared the differences between Thymoglobulin (ATG-T) and Grafalon (ATG-G), and 1 discussed the impact of ATG-T dose. Overall cGvHD, aGvHD grades II-IV, TRM, OS, NRM, LFS, relapse, overall infections, and EBV reactivation do not seem to be affected by the type of utilised rATG. However, data on aGvHD grades III-IV, GRFS, moderate-severe cGvHD, and CMV reactivation is conflicting. Through our research, we sought to summarise the most recent findings concerning r-ATGs in allo-HCT, and provide insight into the differences between the targets and origin of various ATG formulations.

The present paper aims to increase knowlodge of the methods of resistance estimating of concrete in situ by means of non-destructive tests used to integrate the quantitative results from cylindrical specimens (core). The results of experimental investigations carried out on concrete conglomerate samples of a school building are shown. The experimental campaign then will be presented like a case study, conducted on a series of concrete beams and pillars of an existing building. The distructive tests on cores were conducted at the Civil Structures Laboratory of the Engineering Department of the University of Campania "Luigi Vanvitelli". The expression obtained through the calibration procedure of the values of non-destructive tests with those provided by the core drills allowed to estimate the average values of the compressive strength of the concrete. It is highlighted how this result was achieved with a very limited core number provided that they are extracted in selected points and that there was a proportionality link with the resistances obtained from non distructive tests.

Coronaviruses are highly transmissible and pathogenic viruses for humans and animals. The vast quantity of information collected about SARS-CoV-2 during the pandemic helped to unveil details on the mechanisms behind the infection, which are still largely elusive. Recent research demonstrated that different class I/II human leukocyte antigen (HLA) alleles might define an individual susceptibility to SARS-CoV-2 spreading, contributing to the differences in the distribution of the infection through different populations; additional studies suggested that the homolog of the HLA in cats, the Feline Leukocyte Antigen (FLA), plays a pivotal role in the transmission of viruses. With these premises, this study aimed to exploit a bioinformatic approach for the prediction of the transmissibility potential of two distinct Feline Coronaviruses (FCoVs) in domestic cats (Feline enteric Coronavirus, FeCV and Feline Infectious Peritonitis Virus, FIPV) using SARS-CoV-2 as the reference model. We performed an epitope mapping of nonapeptides deriving from SARS-CoV-2, FeCV and FIPV glycoproteins and predicted their affinities for different alleles included in the three main loci in class I FLAs (E, H and K). The predicted complexes with the most promising affinities were then subjected to molecular docking and molecular dynamics simulations to provide insights into the stability and binding energies in the cleft. Results showed the FLA proteins encoded by alleles in FLA-I H (H*00501 and H*00401) and E (E*01001 and E*07001) loci are largely responsive to several epitopes deriving from replicase and spike proteins of the analyzed coronaviruses. The analysis of the most affine epitope sequences resulting from the prediction can stimulate the development of anti-FCoV immunomodulatory strategies based on peptide drugs.

This paper describes the first results of an Image Recognition Based Location (IRBL) for mobile application focusing on the procedure to generate a Database of range images (RGB-D). In an indoor environment, to estimate the camera position and orientation, a prior spatial knowledge of the surrounding is needed. In order to achieve this objective a complete 3D survey of two different environment (Bangbae metro station of Seoul and E.T.R.I. building in Daejeon – Republic of Korea) was performed using LiDAR (Light Detection And Ranging) instrument and the obtained scans were processed in order to obtain a spatial model of the environments. From this, two databases of reference images were generated using a specific software realized by the Geomatics group of Politecnico di Torino (ScanToRGBDImage). This tool allow to generate synthetically different RGB-D images) centered in the each scan position in the environment. Later, the external parameters (X, Y, Z, ω, φ, κ) and the range information extracted from the DB images retrieved, are used as reference information for pose estimation of a set of acquired mobile pictures in the IRBL procedure. In this paper the survey operations, the approach for generating the RGB-D images and the IRB strategy are reported. Finally the analysis of the results and the validation test are described.

Phased injection of natural gas into internal combustion marine engines is a promising solution for optimizing performance and reducing harmful emissions, particularly unburned methane, a potent greenhouse gas. This innovative practice distinguishes itself from continuous injection because it allows for more precise control of the combustion process with only a slight increase in system complexity. By synchronizing the injection of natural gas with the intake and exhaust valve opening and closing times while also considering the gas path in the manifolds, methane release into the atmosphere is significantly reduced, making a substantial contribution to efforts to address climate change. Moreover, phased injection improves the efficiency of marine engines, resulting in reduced overall fuel consumption, lower fuel costs, and increased ship autonomy. This technology has been tested on a single-cylinder, large-bore, four-stroke research engine designed for marine applications, operating in dual-fuel mode with diesel and natural gas. Performance was compared with that of the conventional continuous feeding method. Evaluation of the effect on equivalent CO2 emissions indicates a potential reduction of up to approximately 20%. This reduction effectively brings greenhouse gas emissions below those of the diesel baseline case, especially when injection control is combined with supercharging control to optimize the air-fuel ratio.

This paper presents Double Database Decomposition Framework, which integrates vertical and horizontal table decompositions to minimize data leakage due to intrusions. Vertical decompositions segregate sensitive attributes, while horizontal ones partition data based on user access patterns. In this way, the framework ensures that users access only the data necessary for their operations, adhering to the principle of least privilege. This double decomposition approach improves the robustness of the original database against impersonation attacks and limits the blast radius of potential intrusions. Furthermore, the framework significantly mitigates the risks associated with data breaches by confining unauthorized access to specific data subsets and restricting the exposure of sensitive information. Performance analysis highlights the trade-offs between robustness and overhead offered by distinct allocation strategies of the output of the decompositions to, among other, physical machines, virtual machines, and containers, to balance security and resource efficiency. We present a case study in a healthcare environment that confirms both the effectiveness of the framework and its applicability in complex systems where data security is paramount. By integrating advanced security measures and optimising data access, the framework results in a scalable and adaptable solution for enhancing database security and performance in various domains.

A connection between the phenomenon of wafer bifurcation and that of spontaneous symmetry breaking (SSB) has been established. Indeed, by developing an analytical approximation of the elastic energy of a wafer coated with a thin layer (e.g. a metal), it is shown as the elastic potential energy, interpreted as a quantity contributing to the thermodynamic free energy, can be investigated within the framework of the Landau theory of the second order phase transitions. The elastic energy of a bifurcated wafer is a complex function of the stress and the curvatures in the two perpendicular directions. In this work, it is shown as a translation of the coordinate system of the curvatures allows to gain a potential which has a “Mexican hat” shape. This is a distinctive trait of the phenomenon of spontaneous symmetry breaking (SSB). Moreover, it is shown as the values of the coordinates at the minimum of the SSB potential agrees with those provided by the theory. Bifurcation is hence a phenomenon that can also be interpreted as a spontaneous symmetry breaking where the rotational symmetry of a disc shaped wafer is broken. It occurs because of a lowering of the wafer energy in the SSB broken symmetry configuration.

The prediction of capacity degradation, and more generally of the behaviors related to battery aging, is useful in the design and use phases of a battery to help improve the efficiency and reliability of energy systems. In this paper, a stochastic model for the prediction of battery cell degradation is presented. The proposed model takes its cue from an approach based on Markov chains, although it is not comparable to a Markov process, as the transition probabilities vary as the number of cycles that the cell has performed varies. The proposed model can reproduce the abrupt decrease in the capacity that occurs near the end of life condition (80% of the nominal value of the capacity) for the cells analyzed. Furthermore, we illustrate the ability of this model to predict the capacity trend for a lithium-ion cell with nickel-manganese-cobalt (NMC) at the cathode and graphite at the anode subjected to a life cycle in which there are different aging factors, using the results obtained for cells subjected to single aging factors.

The DNA Damage Response (DDR) is a complex signaling network that comes into play when cells experience genotoxic stress. Upon DNA damage, cellular signaling pathways are rewired to slow down cell cycle progression and allow recovery. However, when the damage is beyond repair, cells activate complex and still not fully understood mechanisms, leading to a complete proliferative arrest or cell death. A number of conventional and novel anti-neoplastic treatments rely on causing DNA damage or on the inhibition of the DDR in cancer cells. However, the identification of molecular determinants directing cancer cells toward recovery or death upon DNA damage is still far from complete, and it is object of intense investigation. SPRY-COntaining RAN binding Proteins (Scorpins) RANBP9 and RANBP10 are evolutionarily conserved and ubiquitously expressed proteins whose biological functions are still debated. RANBP9 has been previously implicated in cell proliferation, survival, apoptosis and migration. Recent studies also showed that RANBP9 is involved in the Ataxia Telangiectasia Mutated (ATM) signaling upon DNA damage. Accordingly, cells lacking RANBP9 show increased sensitivity to genotoxic treatment. Although there is no published evidence, extensive protein similarities suggest that RANBP10 might have partially overlapping functions with RANBP9. Like RANBP9, RANBP10 bears sites putative target of PIK-kinases and high throughput studies found RANBP10 to be phosphorylated following genotoxic stress. Therefore, this second Scorpin might be another overlooked player of the DDR alone or in combination with RANBP9. This review focuses on the relatively unknown role played by RANBP9 and RANBP10 in responding to genotoxic stress.

The study attempts, above all, to provide a summary, with a strictly scientific basis, about the strategies of conservation of autochthonous agrobiodiversity followed in Italy. A special focus is dedicated on vegetables and, therefore, could represent a contribution to improve the national strategy for the safeguarding of its agrobiodiversity in general. The paper offers also an outlook on the most critical factors of the ex situ conservation and some actions which need to be taken. Some examples of ‘novel’ recovered neglected crops are also given. Finally a case study is proposed: ‘Mugnolicchio’, a neglected race of Brassica oleracea L., cultivated in Altamura (Ba) in southern Italy. ‘Mugnolicchio’ might be considered as an early step in the evolution of broccoli (B. oleracea L. var. italica Plenck) like ‘Mugnoli’ another neglected race described from Salento (Apulia).

With the renewed interest for lunar surface exploration, the European Space Agency envisions to stimulate the creation of lunar communications and navigation services (LCNS) to enable, among others, autonomous navigation capabilities for lunar rovers. As the number of satellites foreseen in such a service is much smaller compared to Earth based global navigation satellite systems (GNSS), different complementary technologies are pursued to improve the attainable navigation accuracy for lunar rovers. One way to improve the position accuracy provided by the LCNS satellites is to constrain the vertical position using a high resolution digital elevation model (DEM). This article presents the results of a variance covariance analysis of an extended Kalman filter (EKF) implementation in which the LCNS ranging measurements are used together with DEM from the LRO LOLA instrument. Assuming a realistic orbit determination and time synchronization (ODTS) accuracy of the LCNS satellites, the usage of a navigation grade IMU and an oven controlled crystal oscillator (OCXO), a 3-sigma position accuracy of less than 10 meters can be obtained. Furthermore, the availability is substantially improved as the DEM aided solution enables a position solution in case of only 3 visible satellites.

The hinterland of the Taranto Gulf in Basilicata (southern Italy) provides a great opportunity for the study of coarse-grained coastal systems belonging to a staircase of Quaternary terraced ma-rine-deposits. Among gravelly successions, beach deposits abound in the stratigraphic record, offering exceptional outcrops useful to allow detailed information on their facies features. In this paper, we describe sedimentary facies, textural variations and depositional architecture of these deposits in order to: - demonstrate that the area is an excellent training ground for the study of gravelly beaches in microtidal settings; - discuss about the use of beach deposits as proxy of even small relative sea level variation.

The calculation of the collapse load of spherical domes is addressed using a semi-analytical approach under the hypotheses of small displacements and perfect plasticity. The procedure is based on the numerical approximation of the self-stress that represents the projection of the balance equilibrium null space on a finite dimensional manifold. The so obtained self-equilibrated stress span is superimposed to a finite element linear elastic solution to the prescribed loads yielding to the statically admissible set accordingly to Melan’s theorem. The compatibility of the stress with the constitutive law of the material has been enforced using linearized limit domain in terms of generalized stress, namely axial force and bending moment along the local spherical curvilinear coordinates. The procedure has been tested with reference to numerical and experimental data from the literature confirming the accuracy of the proposed method. The comparison with the literature confirms that the buckling load is much greater than the plastic collapse loads both calculated through the proposed procedure and reported in the quoted literature.

Oligodendrocytes are myelinating cells of the central nervous system, which are generated by progenitor oligodendrocytes as a result of maturation processes. The main function of mature oligodendrocytes is to produce myelin, a lipid-rich multi-lamellar membrane that wraps tightly around neuronal axons, isolating them and facilitating nerve conduction through saltatory propagation. The myelination process requires the consumption of a lot of energy and a high metabolic turnover. Mitochondria are essential organelles which regulate many cellular functions including the energy production through oxidative phosphorylation. Any mitochondrial dysfunction impacts cellular metabolism and negatively affects the health of the organism. If the functioning of the mitochondria is unbalanced the myelination process is impaired. At the end of myelination, oligodendrocytes synthesize about 40% of the total lipids present in the brain. Since lipid synthesis occurs in the cellular endoplasmic reticulum, the alteration of this organelle can lead to partial or deficient myelination, triggering numerous neurodegenerative diseases. In this review the main dysfunctions of oligodendrocytes caused by exogenous or endogenous stimuli will be investigated. Furthermore, the oligodendrocyte reactions to excessive mitochondrial oxidative stress and an altered regulation of the functioning of the endoplasmic reticulum will be discussed.

The co-electrolysis of CO2 and H2O at intermediate temperature is a viable approach for the power-to-gas conversion that deserves for further investigation, considering the need for green energy storage. The commercial solid oxide electrolyser is a promising device, but it is still facing to solve issues concerning the high operating temperatures and the improvement of gas value. In this paper we reported the recent findings of a simple approach that we have amply suggested for solid oxide cells consisting in the addition of a functional layer coated to the fuel electrode of commercial electrochemical cells. This approach simplifies the transition to the next generation of cells manufactured with the most promising materials currently developed and improves the gas value in the outlet stream of cell. Here, the material in use as a coating layer consisted of a Ni-modified La0.6Sr0.4Fe0.8Co0.2O3 which was developed and demonstrated as promising fuel electrode for solid oxide fuel cells. The results discussed in this paper proved the positive role of Ni-modified perovskite as a coating layer for the cathode, since an improvement of about twice was obtained about the quality of gas produced.

Colony-stimulating factor 1 receptor (CFS-1R) is a myeloid receptor with a crucial role in monocyte survival and differentiation. Its overexpression is associated with aggressive tumor characterized by an immunosuppressive microenvironment and poor prognosis. CSF-1R ligands, IL-34 and M-CSF, are produced by many cells in the tumor microenvironment (TME), suggesting a key role for the receptor in the crosstalk between tumor, immune and stromal cells in the TME. Recently, CSF-1R expression was reported at the cell membrane of cancer cell from different solid tumors, capturing the interest of various research group interested in investigating the role of this receptor in non-myeloid cells. This review summarizes current data available on the expression and activity of CSF-1R in different tumor types. Notably, CSF-1R+ cancer cells have been shown to produce CSF-1R ligands, indicating that CSF-1R signaling is positively regulated in autocrine manner in cancer cells. Recent research demonstrated that CSF-1R signaling enhances cell transformation by supporting tumor cell proliferation, invasion, stemness and drug resistance. In addition, this review covers recent therapeutic strategies, including monoclonal antibodies and small molecule inhibitors, targeting the CSF-1R and designed to block the pro-oncogenic role of CSF-1R in cancer cell.

The need to recycle carbon fibre reinforced composite polymers (CFRP) has grown significantly to reduce the environmental impact generated by their production. To meet this need, thermoreversible epoxy matrices have been developed in recent years. This study investigates the performance of an epoxy vitrimer made by introducing a metal catalyst (Zn2+) and its carbon fibre composites focusing on the healing capability of the system. The dynamic crosslinking networks endow vitrimers with interesting rheological behaviour, the capability of the formulated resin (AV-5) has been assessed by creep tests. The analysis showed increased molecular mobility above a topology freezing temperature (Tv). However, the reinforcement phase inhibits the flow capability reducing the flow. The fracture behaviour of CFRP made with the vitrimeric resin has been investigated by Mode I and Mode II tests and compared with the conventional system. The repairability of the vitrimeric CFRP has been investigated by attempting to recover the delaminated samples, which yielded unsatisfactory results. Moreover, the healing efficiency of the modified epoxy composites has been assessed by using the vitrimer as an adhesive layer. The joints were able to recover about 84% of the lap shear strength of the pristine system.

Named herein “CytroCell”, the cellulosic material obtained via hydrodynamic cavitation of citrus processing waste in water is cellulose of low crystallinity, high porosity, good water holding capacity and good dispersibility in water. These properties, here demonstrated for the first time for lemon and grapefruit CytroCell, open the route to mass scale production of a useful functional material from a cheap and abundant biowaste. The process, indeed, does not require any pre-treatment of the raw material, and does not use acid, alkali, chemical oxidants or enzymes.

Small molecule inhibitors of adipocyte fatty-acid binding protein 4 (FABP4) have got interest following the recent publication of their pharmacologically beneficial effects. Recently it comes out that FABP4 is an attractive molecular target for the treatment of type 2 diabetes, other metabolic diseases, and some type of cancers. In the past years, hundreds of effective FABP4 inhibitors have been synthesized and discovered but, unfortunately, none of them is in the clinical research phase. The field of computer-aided drug design seems to be promising and useful for the identification of FABP4 inhibitors; hence, different structure- and ligand-based computational approaches were already performed for their identification. In this paper, we searched for new potentially active FABP4 ligands in the Marine Natural Products (MNP) database. 14,492 compounds were retrieved from this database and filtered through a statistical and computational filter. Seven compounds were suggested by our methodology to possess a potential inhibitory activity upon FABP4 in the range of 79–245 nM. ADMET properties prediction were performed to validate the hypothesis of the interaction with the intended target and to assess the drug-likeness of these derivatives; from these analyses, three molecules resulted as excellent candidates for becoming new drugs.

Mediterranean Diet (MD), rich in minimally processed plant foods and in monounsaturated fats, but low in saturated fats, meat and dairy products, represents one of the most studied diets for cardiovascular health. It has been shown, from both observational and randomized controlled trials, that MD reduces body weight, improves cardiovascular disease surrogates such as waist-to-hip ratio, lipids, and inflammation markers, and even prevents the development of fatal and non-fatal cardiovascular disease, diabetes, obesity, and other diseases. However, it is unclear whether it offers cardiovascular benefits from its individual components or as a whole. Furthermore, limitations in the methodology of studies and meta-analyses have raised some concerns on its potential cardiovascular benefits. MD is also associated with characteristic changes in the intestinal microbiota, mediated through its constituents. These include increased growth of species producing short-chain fatty acids, such as Clostridium leptum and Eubacterium rectale, increased growth of Bifidobacteria, Bacteroides and Faecalibacterium prausnitzii species, and reduced growth of Firmicutes and Blautia species. Such changes are known to be favorably associated with inflammation, oxidative status, and overall metabolic health. This review will focus on the effects of MD on cardiovascular health through its action on gut microbioma.

Safety assessment of structures can be obtained employing limit design to overcome uncertainties concerning actual response due to inelastic constitutive behavior and more generally to non-linear structural response and loads’ random variability. The limit analysis is used for evaluating the safety of the structures directly starting from load level without any knowledge of the load history. In the paper, the lower bound calculation is proposed where a new strain-based approach is used that allowed describing the residual stress and displacement in terms of permanent strain. The strategy used the permanent strain as the effective parameters of the procedure so that it was possible to assess the ductility requirements for the complete load program developed till collapse or shakedown. The procedure is compared to experimental results obtained on aluminum beams in shakedown.

This study investigates the impact of vertical greenery systems (VGS) applied to heavyweight walls on indoor thermal conditions in a building module situated in the Mediterranean climate of Catania, Italy. Using dynamic simulations in TRNSYS, the research compares the thermal behavior of walls constructed from hollow clay blocks (Poroton) and lava stone blocks with a lightweight wall setup already in place at the University of Catania. The primary focus is on evaluating the VGS’s effect on reducing peak inner surface temperatures and moderating heat flux fluctuations entering the building. The findings indicate that adding a vertical greenery layer to heavyweight walls can decrease the peak inner surface temperature by up to 1.0°C compared to the same wall without vegetation. However, the greenery’s impact on mitigating heat flux fluctuations is less pronounced than in the case of the lightweight wall. This research underscores the potential of green facades in enhancing indoor thermal comfort in regions with climates similar to the Mediterranean, providing valuable insights for sustainable building design and urban planning.

In this work, we propose an in-house simulation tool designed for the analysis and optimization of bifacial photovoltaic (PV) modules, which are currently under the spotlight in the renewable energy scenario. The tool is conceived to support researchers and engineers by providing fast and accurate predictions of the PV module yield under various operating and environmental conditions. For a chosen geographical site, the impact of module orientation, tilt, albedo, sky conditions, ambient temperature, and so on, can be effortlessly determined. In case of nonuniformity across the cells dictated by localized architectural shading, dirt, bird drops, defects, a circuit-based cell-level approach can be activated to compute the module production. An extensive simulation campaign is performed by assuming that the panels are installed in Naples without loss of generality. Results are shown to give detailed insights into the performance of bifacial modules, thus providing unambiguous guidelines for their correct installation. Further analyses are conducted to demonstrate the tool capability to quantify the detrimental influence of a poorly-irradiated cell on the backside, as well as of cracked cells.

The present paper deals with the investigation, at conceptual level, of the performance of short-medium-range aircraft with hydrogen propulsion. The attention is focused on the relationship between figures of merit related to transport capability, such as passenger capacity and flight range, and the parameters which drive the design of liquid hydrogen tanks and their integration with a given aircraft geometry. The reference aircraft chosen for such purpose is a box-wing short-medium-range airplane, object of study within a previous European research project called PARSIFAL, capable to cut the fuel consumption per passenger-kilometre up to 22%. By adopting a retrofitting approach, non-integral pressure vessels are sized to fit into the fuselage of the reference aircraft, under the assumption that the main aerodynamic, flight mechanic and structural characteristics are not affected. A parametric model is introduced to generate a wide variety of fuselage-tank cross-section layouts, from a single tank with the maximum diameter compatible with a catwalk corridor to multiple tanks located in the cargo deck , and an assessment work-flow is implemented to perform the structural sizing of the tanks and analyse their thermodynamic behaviour during the mission. This latter is simulated with a time-marching approach that couples the fuel request from engines with the thermodynamics of the hydrogen in the tanks, which is constantly subject to evaporation and, depending on the internal pressure, vent-ed-out in gas form. Each model is presented in detail in the paper and results are provided through sensitivity analyses to both the technology parameters of the tanks and the geometric parameters influencing their integration. The guidelines resulting from the analyses indicate that light materials, such as the Aluminium alloy AA2219 for tanks’ structure and polystyrene foam for the insulation, should be selected. Preferred values are also indicted for the aspect ratios of the vessel components, i.e. central tube and endcaps, as well as suggestions for the integration layout to be adopted depending on the desired trade-off between passenger capacity, as for the case of multiple tanks in the cargo deck, and achievable flight ranges, as for the single tank in the section.

During the thinning process, in the semiconductor industry, residual stress from thin films can cause severe warpage in wafers, which can compromise their processability and packaging. This warpage can lead to bifurcation or buckling, making it important to understand this phenomenon for the manufacturing of large semiconductor wafers. We conducted a finite element analysis of the thinning process using ANSYS mechanical enterprise 2023/R2 to investigate the asymmetric curvatures resulting from bifurcation in a standard 300 mm Si (001) wafer. We induced an asymmetry in the system by applying a slight force on a point of the circumferential region perpendicularly to the substrate. We also simulated the compressive stress from the damaged layer formed during the thinning process and considered its influence on warpage and bifurcation in both linear and non-linear cases. We also included the influence of Earth's gravity induced deflection (GID) and investigated the influence of the compressive stress damaged layer on the grinding process of the whole wafer by adding a metal front layer to the ground back damaged wafer.

Scaling up the production of power devices involves, in the semiconductor industry, the use of large semiconductor 8” and 12” wafers of Si or SiC. Their use implicates a successful an effective monitoring and control of wafer warpage, as the geometrical size of the substrate increases, as well as a command control on the degeneration of non-linear warpage into critical phenomena known as bifurcation or buckling.To mitigate the warpage, the use of taiko wafers, which consists of wafers having a thicker region on the rim region of the wafer, has been generally adopted in the production lines. In a previous work [1] we investigated the warpage of taiko wafers by introducing the concept of equivalent thickness, in the linear approximation, for the case of a front side metalized taiko wafer. However, as the thickness of the central semiconductor substrate region decreases the possibility that also the taiko wafer bifurcates emerges. For this reason, in this work we have investigated the occurrence of bifurcation or buckling in a taiko wafer. In particular, we implemented a finite element analysis method by using ANSYS Mechanical Enterprise 2023/R2 to investigate the phenomenon of bifurcation in a taiko wafer. The investigated system consisted of a 200 mm Si (001) front side metalized (FSM) taiko wafer, having a substrate thickness ranging from 100 µm to 400 µm, with a step height fixed to 450 µm. The FSM layer consisted of an Al layer of 4.5 µm thin. The system was subjected to a thermal load such that, getting cooled from a nominal temperature T to 25°C, the metal layer can develop a residual stress. To investigate the bifurcation, an asymmetry was induced in the system by applying a slight force on a point of the circumferential region perpendicularly to the substrate. The temperature investigated ranged from 30 °C to 170 °C. From this investigation, it results that also the bifurcation is mitigated by the taiko structure. Indeed, the bifurcation emerges at higher values of the stresses with respect to the case of flat wafers having the same size and thickness of the substrate. Moreover, the concept of equivalent thickness needs to be reformulated by taking into account of the bifurcation phenomenon. Indeed, from the warpage at the bifurcation point of the taiko wafer, we can determine an overall equivalent thickness of the taiko wafer.

Abstract Thyroid diseases have a complex and multifactorial aetiology. Despite the numerous studies on the signals referable to the malignant transition, still remain elusive the molecular mechanisms concerning the role of oxidative stress. Based on its strong oxidative power, H2O2 could be responsible for the high level of oxidative DNA damage observed in cancerous thyroid tissue and hyper-activation of mitogen-activated protein kinase (MAPK), and PI3K/Akt, that mediate ErbB signaling. Increased levels of 8-oxoG DNA adducts have been detected in the early stages of thyroid cancer. These DNA lesions are efficiently recognized and removed by the base excision repair (BER) pathway initiated by 8-oxoG glycosylase1 (OGG1). This study investigated the relationship between the EGFR and OGG1-BER pathways and their mutual regulation following oxidative stress stimulus by H2O2 in human thyrocytes. We clarified the modulation of ErbB receptors and their downstream pathways (PI3K / Akt and MAPK / ERK) under oxidative stress (from H2O2) at the level of gene and protein expression, according to the mechanism defined in a non-pathological cell system, Nthy-ori 3-1. Later, on the basis of the obtained results of gene expression cluster analysis in normal cells, we assessed the dysregulation of the relationships in a model of papillary thyroid cancer with RET/TPC rearrangement (TPC-1). Our observations demonstrated that a H2O2 stress may induce a physiological cross-regulation between ErbB and OGG1-BER pathways in normal thyroid cells (while this is dysregulated in the TPC-1 cells. Gene expression data also delineated that MUTYH gene could play a physiological role in cross-talk between ErbB and BER pathways and this function is instead lost in cancer cells. Overall our data about OGG1 protein expression suggest that the alternative splicing mechanisms may lead to different protein isoforms, physiologically regulated in response to ErbB modulation, and that these could be dysregulated in the progression of thyroid malignancies with RET/TPC rearrangement.

Immune thrombocytopenia (ITP) is an autoimmune disorder characterized by isolated thrombocytopenia caused by both immune-mediated platelet destruction and impaired platelet production in the bone mar-row, in the absence of any other identifiable cause of low platelets count. ITP in adult patients is a disease that frequently relapses and/or becomes refractory to multiple treatments during its course, with only a small minority of adult patients attaining a sustained complete remission off-therapy. Treatment of refrac-tory ITP can be challenging, due to the unlikeliness of attaining complete response over time. On the other hand, isolated thrombocytopenia may be due to a misdiagnosed clonal myeloid disorder, such as myelodys-plastic syndrome (MDS) or chronic myelomonocytic leukemia (CMML), thus mimicking ITP. We here per-form a narrative review on the association between ITP and MDS/CMML and the possibility of overlap and misdiagnosis between these conditions, while we report also the case a patient treated for a severe re-fractory thrombocytopenia which bone marrow examination led to suspect an overlap of MDS and ITP. Our clinical case describes ITP which is refractory to glucocorticoids, high-dose immunoglobulins, Rituxi-mab, splenectomy, thrombopoietin receptor agonists and Fostamatinib, that ultimately attained a short-lived response to a hypometylating agent that was initiated due to bone marrow examination that aroused the suspect of MDS.

Background: Periprosthetic joint infection (PJI) following total hip and knee arthroplasty remains an extremely challenging and relatively high complication. This study aims to develop, validate and evaluate the use of machine learning (ML) algorithm to predict PJI in patients undergoing revision arthroplasties. Methods: A comprehensive review of patients undergoing hip or knee revision arthroplasty from 1 January 2015 to 31 March 2021 was conducted. Clinical data coming from preoperative patients history, laboratory analysis and demographic characteristics of patients were screened. Final data have been used to train a Logistic Regression model with the aim of predicting PJI preoperatively. Results: 1360 patients were enrolled, 1141 in the aseptic cohort and 219 in the infected cohort were included. ML demonstrated good discriminatory performance in predicting PJI in the selected patients (area under the curve 0.770 ± 0.006 in the training set and 0.720 ± 0.057 in the test set), and identified 3 significant predictors of PJI. Conclusion: ML algorithm trained using preoperative clinical data accurately predicted PJI. The incorporation of ML models into preoperative assessment of patients undergoing prosthetic revision procedures are useful in providing specific risk assessment to aid individualised counselling, shared decision making and presurgical optimization.

Despite notable advancements in immunotherapy in the past decades, allogeneic hematopoietic stem cell transplantation (allo-HCT) remains a promising, potentially curative treatment modality. Only a limited number of studies has performed a direct comparison of two prevalent rabbit anti-thymocyte globulin (r-ATG) formulations — specifically, Thymoglobuline (ATG-T, formerly Genzyme) and Grafalon (ATG-G, formerly Fresenius). The primary objective of our retrospective analysis was to compare the outcomes of adult patients undergoing matched or mismatched unrelated donor (MUD/MMUD) allo-HCT, with a graft-versus-host disease (GvHD) prophylaxis based on either ATG-T or ATG-G. A total of 87 patients undergone allo-HCT between 2012 and 2022 were included. We observed no significant differences between ATG-T and ATG-G concerning the occurrence of acute graft-versus-host disease (aGvHD), regardless of its severity. Conversely, chronic graft-versus-host disease (cGvHD) occurred less frequently in the ATG-T group compared to ATG-G (7.5% vs. 38.3%, p=0.001). Patients treated with ATG-T manifested a higher incidence of cytomegalovirus (CMV) reactivations (70% vs. 31.9%, p&lt;0.001), with a shorter time between transplant and CMV (&lt;61 days, 77.8% vs. 33.3%, p=0.008) and a higher median CMV copy number (1000 vs. 0, p=0.004). Notably, despite a higher occurrence of CMV reactivations in the ATG-T cohort, most patients were asymptomatic compared to ATG-G (85.7% vs. 43.8%, p=0.005). Finally, we observed no significant differences in terms of 5-year overall survival (OS) and 3-year probability of relapse while comparing ATG-T and ATG-G (32.0% vs 40.3%, p=0.423; 63.9% vs 55.7%, p=0.438, respectively).

Production of energy is a main task of cancer cells metabolism, since costs of duplicating are enormous. Although energy is derived in cells by dismantling carbon to carbon bonds of any macronutrient, cancer nutritional needs for energetic purposes have been studied primarily as dependent on glycolysis. Since the end of the last century, awareness of dependence of cancer metabolism on amino acids not only for protein syntheses but also for matching energy needs has grown. The roles of specific amino acids, like glutamine, glycine and serine have been explored in different experimental conditions and reviewed. Moreover, there are epidemiological evidences that some amino acids used as supplement for therapeutic reasons (the branched chain ones) may reduce incidence of liver cancer, and some molecular mechanism has been proposed as functional to their protective action. On the contrary, metabolic signature of some pathology connected with increased risk of cancer, like prolonged hyperinsulinemia in insulin resistant patients, is signed by plasma elevated levels of the same branched chain amino acids, posing puzzling questions to clinicians. Most recently, peculiar formulations of amino acids, deeply different if compared to amino acids compositions normally present in foods, have shown the power to master epigenetics slowing growth or driving cancer cells to apoptotic death, while being even beneficial for normal cells and for animals health and life span. In this review, we will analyze and try to disentangle some of the many knots dealing with complexities of amino acids biology and linked to cancer metabolism.

Background: due to increase in total hip arthroplasties (THAs), the incidence of periprosthetic hip fractures (PPHFs) is forecast to raise considerably in the next decades, with Vancouver B1 fractures (VB1) accounting for one third of total cases. Femur fixation with cerclages (with or without screws) is considered the current treatment option for intraoperative VB1. Methods: the study retrospectively includes data from patients who developed VB1 PPHFs during THAs from December 3rd 2020 to November 30th 2022. The primary outcome of this study was to identify the reintervention-free survival rate. The secondary aim was to determine clinical and radiographic assessment at follow-up, based on Harris hip score (HHS) and limb length discrepancy (LLD). Results: 37 patients with mean age 60.03 ± 15.49 (22 to 77) years old were included. Overall, the Kaplan-Meier estimated a re-operation free survival rate of 99% (CI 95%) at 6 months. The mean limb length discrepancy (LLD) improved from -3.69±6.07 (range -27.9 to 2.08) mm to 0.10±0.67 (range -1.07 to 1.20) mm. The mean HHS improved from 42.72±14.37 (range 21.00-96.00) to 94.40±10.32 (range 56.00-100.00).

Background Total serum bile acids (TSBA), liver-spleen scan and dynamic liver functional tests, in our case the antipyrine clearance (Ap Cl), have been long adopted. The aim of our study was that of assessing whether some diagnostic tests, scarcely performed due to the novel techniques implementation, were reliable diagnostic tools. Methods Data extracted from records of two well-matched for age and gender populations was retrospectively analysed. Specifically, 17 patients with biopsy-proven chronic hepatitis were confronted with 17 subjects suffering from liver cirrhosis. Clinical, laboratory and instrumental findings, such as the Child-Pugh classification, the number connection test for evaluating hepatic encephalopathy, prothrombin time, serum albumin levels, TSBA concentration, Ap Cl determination, abdominal ultrasound and liver-spleen scan imaging as well as endoscopy features were evaluated. Results Cirrhotics showed a median concentration of TSBA increased respect to that of patients with chronic hepatitis, independently from gender, 20.1 versus 12.24 micromol/L, P= 0.0054. The median AP Cl value of the patients with liver cirrhosis was reduced confronted with that of patients with chronic hepatitis, specifically, 13.92 opposed to 18.3 mcg Ap/dL, P= 0.045. Furthermore, the median liver-spleen scan score was higher in cirrhotics than in chronic hepatitis patients, i.e., 3.47 versus 1.47, P= 0.000. The AUROCs of TSBA levels and of the liver-spleen scan scores for differentiating patients with liver cirrhosis from those with chronic hepatitis were 0.82 and 0.96, respectively. When was applied a new predictive model, combining the previous ones, the AUROC to discriminate patients belonging to the two populations was 0.98. The best cut-off of the new index was 26, with a sensitivity and specificity of 100.00% and 82.35%, respectively, correctly classifying 91.18% of the patients. Discussion Both TSBA and liver-spleen scan were high discriminant as well as their combination, while Ap Cl showed some limitations as reliable diagnostic tool. TSBA and liver-spleen scan have been too soon and unnecessarily overlooked.

The level of ambiguity in describing glycan structure has significantly increased with the upsurge of large scale glycomics and glycoproteomics experiments. Consequently, an ontology-based model appears as an appropriate solution for navigating this data. However, navigation is not sufficient and the model should also enable advanced search and comparison. A new ontology with a tree logical structure is introduced to represent glycan structures irrespective of the precision of molecular details. The model heavily relies on the GlycoCT encoding of glycan structures. Its implementation in the GlySTreeM knowledge base was validated with GlyConnect data and benchmarked with the Glycowork library. GlySTreeM is shown to be fast, consistent, reliable and more flexible than existing solutions for matching parts of or whole glycan structures. The model is also well suited to painless future expansion. Availability:https://glyconnect.expasy.org/glystreem/wiki

Scientific social networking sites like Researchgate or Academia.edu have become part of the work practice of academic researchers. These digital platforms have been designed precisely to encourage the exchange of knowledge between scholars and to help the expansion of collaborative networks among them. Even if studies on this topic have multiplied in recent years, there is a dearth of research on the actual impact of these platforms on scientific production. The goal of this study is to investigate the relation between the attitude of researchers towards scientific social networks and the use of knowledge in their scientific work. Data from users of the scientific social networking site Researchgate were collected. A total of 143 valid responses were received and structural equation modeling was applied for data analysis. Findings of this study confirmed that researchers use knowledge obtained from scientific social networking sites both incorporating it within their research products and to acquire new competences. In particular approaching the platform as a scientific community with a shared language and a shared vision was found to have a positive impact on knowledge use. To the best knowledge of the authors this is the first study investigating the actual use of knowledge from scientific social networking sites by academic researchers. Results help to understand the impact of these platforms on the work practice of a strategic sector like scientific research.

Total Hip Arthroplasty is one of the most successful surgery. However, due to the worldwide growing population life expectancy and the related incidence of age-dependent bone diseases, a growing number of cases of intra-operative fractures lead to revision surgery with high rates of morbidity and mortality. Surgeons choose the type of the implant, either cemented or cementless prosthesis, on the basis of the age, the quality of the bone and the general medical conditions of the patients. Generally, no quantitative measures are available to assess the intra-operative fracture risk. Consequently, the decision-making process is mainly based on medical operators’ expertise and qualitative information obtained by imaging. Motivated by this scenario, we here propose a mechanical-supported strategy to assist surgeons in their decisions, by giving intelligible maps of the risk fracture which take into account the interplay between actual strength distribution inside the bone tissue and its response to the forces exerted by the implant. To this end, we produce charts and patient-specific synthetic “traffic-light” indicators of fracture risk, by making use of ad hoc analytical solutions to predict the stress levels in the bone by means of CT-based mechanical and geometrical parameters of the patient. We felt that, if implemented in a friendly software or proposed as an app, the strategy could constitute a practical tool to help the medical decision-making process, in particular with respect to the choice of adopting cemented or cementless implant

Data collection and analysis are becoming more and more important in a variety of application domains as long as the novel technologies advance. At the same time, we are experiencing a growing need for human-machine interaction with expert systems pushing research through new knowledge representation models and interaction paradigms. In particular, in the last years eHealth - that indicates all the health-care practices supported by electronic elaboration and remote communications - calls for the availability of smart environment and big computational resources. The aim of this paper is to introduce the HOLMeS (Health On-Line Medical Suggestions) framework. The introduced system proposes to change the eHealth paradigm where a trained machine learning algorithm, deployed on a cluster-computing environment, provides medical suggestion via both chat-bot and web-app modules. The chat-bot, based on deep learning approaches, is able to overcome the limitation of biased interaction between users and software, exhibiting a human-like behavior. Results demonstrate the effectiveness of the machine learning algorithms showing 74.65% of Area Under ROC Curve (AUC) when first-level features are used to assess the occurrence of different prevention pathways. When disease-specific features are added, HOLMeS shows 86.78% of AUC achieving a more specific prevention pathway evaluation.

Background: Community pharmacies have unparalleled potential to increase access to pre-exposure prophylaxis medications (PrEP) for HIV prevention; however, only 17 out of 50 states in the United States have statewide authority for pharmacists to provide PrEP at community pharmacies. Few studies have reported on how pharmacists overcome the legislative barrier and provide PrEP services in restrictive pharmacy prescription states. The objective of this article is to identify the existing primary literature describing pharmacist PrEP service in the community in states with restrictive prescription authority. Methods: A systemic literature review was conducted to identify primary literature that involved community pharmacy service and PrEP conducted in states that do not have expanded pharmacist prescriptive authority between 2000 and 2024. Results: Ten publications were identified describing nine studies, including four interview and survey studies, three intervention reports, and two ongoing clinical trials. None of these studies have a control group. Most pharmacists provide PrEP service in the community through a collaborative practice agreement with a primary care provider. Conclusions: Future clinical studies with randomized controlled designs are required to test novel strategies in the education and implementation of pharmacy-led PrEP services in a community pharmacy setting to increase PrEP access.

Background: Post-delivery period could be characterized by psychological distress (e.g., anxiety, sadness, and irritability), leading to post-partum depression (PPD). Objective: The present clinical study assess the effect of probiotic supplementation containing Limosilactobacillus reuteri PBS072 and Bifidobacterium breve BB077 (4x10⁹ CFU/day) on mother’s mood and breastfeeding quality during the first trimester after delivery. Methods: A Randomized Double Blind Controlled (RDBPC) trial has been carried out in 200 healthy new mothers divided into an active group taking a supplement containing Limosilactobacillus reuteri PBS072 and Bifidobacterium breve BB077 (4x10⁹ CFU/day) plus multivitamins, and a control group (multivitamin complex only) for 90 days. Symptoms related to maternal depression and breastfeeding quality were evaluated at days 45 and 90 by Edinburgh Postnatal Depression Scale (EPDS) and Breastfeeding Self-Efficacy Scale Short-Form (BSES-SF). Results: At days 45 and 90, probiotic treatment significantly ameliorated the mothers’ mood compared to the control treatment (p<0.001). Likewise, breastfeeding quality and baby’s cries significantly improved in the probiotic group (p<0.001). Conclusions: Microbiota alterations could influence post-delivery woman’s mental state. According to our results, L. reuteri PBS072 and B. breve BB077 are potential candidates able to improve stress resilience in the post-partum period.

The analysis of autosomal polymorphism (STR) or Y chromosome polymorphisms (Y-STR) are usually used for the study and deconvolution of mixed DNA profiles in forensic genetics, accompanying data interpretation with biostatistical evaluations (e.g. RMP, RMNE, LR). Sometimes, however, some mixed DNA profiles are so complex that the autosomal and Y markers do not allow a correct discrimination and identification. In this work is reported a robbery case in which the analysis of the polymorphic markers of the X chromosome was applied to the mixed profiles obtained from the traces, thus falling outside the classic relationship use of the X-STRs. The aim of the authors is, in fact, to encourage the classic use of X-STRs not only in parental relationships, but also in purely forensic cases for interpreting complex mixed DNA profiles. Their application in case resolution could be more decisive than STR/Y-STR.

The successful handling of large semiconductor wafers is crucial for scaling up their production. Early-stage warpage control allows to prevent undesirable asymmetric warpage, known as wafer bifurcation or buckling. Indeed, even in a gravity-free environment, thinning an 8" or 12" semiconductor wafer can result in warpage and bifurcation. To mitigate this issue, the taiko method, which involves creating a thicker ring region around the rim of the wafer, has been widely used. Previous research has focused on the theoretical factors affecting the warpage of a backside metalized taiko wafer. This work extends the case to a front-side metalized taiko wafer and introduces the concept of the equivalent thickness of a taiko wafer. The equivalent thickness of a taiko wafer, influenced by the ring region, lies in between the thickness of the central region and that of the annular region. Because of the limited number of taiko wafers that can be produced on a production line, modelling can be beneficial. In this work we compared the results of a developed analytical model with those obtained from a finite element analysis (FEA) approach with ANSYSY® software to model the equivalent thickness of a taiko wafer. We investigated the curvature as a function of the stress of the metal layer, considering key design factors such as the substrate region thickness, the thickness of the thin metal film, the step height, and the width of the ring region. By systematically varying the thickness of the central region of the taiko wafer, we explored the curvature as a function of stress induced by thermal load in the linear regime and determined the slopes in the linear region of the curvature vs. stress curves. The aim of this study is to identify regularities and similarities with the Stoney equation and investigate the validity of the analytical approach for the case of a taiko substrate. It results that there is a good agreement between the analytical model of a taiko wafer and the numerical analysis gained by the FEA methods.

New technologies such as "connected" and "autonomous" vehicles are going to change the future of traffic signal control and management and possibly will introduce new traffic signal systems that will be based on floating car data (FCD). The use of floating car data to regulate, in real-time, traffic signal systems has the potential for an increased sustainability of transportation in terms of energy efficiency, traffic safety and environmental issues. However, research has never explored how not "connected" vehicles would benefit by the implementation of such systems. This paper explores the use of floating car data to regulate in real-time traffic signal systems in terms of cooperative-competitive paradigm between "connected" vehicles and conventional vehicles. In a dedicated laboratory, developed for testing regulation algorithms, results show that "invisible vehicles" for the system (which are not "connected") in most simulated cases also benefit when real time traffic signal settings based on floating car data are introduced. Moreover, the study estimates the energy and air quality impacts of signal regulation by evaluating fuel consumption and pollutant emissions. Specifically, the study demonstrates that significant improvements in air quality are possible with the introduction of FCD regulated traffic signals.

A method for measuring the real part of the weak value of spin for non-zero rest mass atoms is presented using a variant on the original Stern-Gerlach apparatus. The experiment utilises helium in the metastable 2³S₁ state. A full simulation for observing the real part of the weak value using the impulsive approximation has been carried out and it predicts a displacement of the beam, Δ_w, that is within the resolution of our detector. It also indicates how this shift might be increased. The full analysis also indicated that there is a limit, L, to the applicability of the weak value approximation and has been evaluated for our apparatus. This experiment has the possibility to be expanded to utilise other nobal gas species such as neon and argon in the ³P₂ metastable state, but we shall restrict this paper to metastable helium only.

Human eye is a specialized organ with complex anatomy and physiology, because it is characterized by different cell types with specific physiological functions. Given the complexity of the eye, ocular tissues are finely organized and orchestrated. In the last few years many in vitro models have been developed, in order to meet the 3Rs principle (Replacement, Reduction and Refinement) for eye toxicity testing. This procedure is highly necessary to ensure that the risks associated with ophthalmic products meet appropriate safety criteria. In vitro preclinical testing is now a well-established practice of significant importance for evaluating the efficacy and safety of cosmetic, pharmaceutical, and nutraceutical products. Along with in vitro testing, also computational procedures, herein described, for evaluating the pharmacological profile of potential ocular drug candidates including their toxicity, are in rapid expansion. In this review the ocular cell types and functionality are described providing an overview about the scientific challenge for the development of three-dimensional in vitro models.

Background: Drought, N deficiency and herbivory are considered the most important stressors caused by climate change in the agro- and eco-systems and varied in space and time shaping a highly dynamic and heterogeneous stressful environments. This study aims to evaluate the to-mato morpho-physiological and metabolic responses to combined abiotic and herbivory at dif-ferent within-plant spatial levels and temporal scales. Methods: Leaf-level morphological, gas exchange traits and VOC profiles were measured in to-mato plants exposed to N deficiency and drought, T. absoluta larvae and their combination. Ad-ditive, synergistic or antagonistic effects of the single stress when combined were also evaluat-ed. Morpho-physiological traits and VOC profile were also measured on leaves located at three different positions along the shoot axes. Results: The combination of the abiotic and biotic stress has been more harmful than single stress with antagonistic and synergistic but non-additive effects for the morpho-physiological and VOC tomato responses, respectively. Combined stress also determined a high within-plant phenotypic plasticity of the morpho-physiological responses. Conclusions: These results suggest that the combined stress in tomato determined a “new stress state” and a higher within-plant phenotypic plasticity which could permit an efficient use of the growth and defence resources in the heterogeneous and multiple stressful environmental condi-tions.

(1) Background: The aim of this investigation is to determine the effect of archwires’ deflection on the temperature transitions driving the austenite to martensite transformation (and vice versa) and the force released by NiTi and CuNiTi orthodontic wires. (2) Methods: Round cross-section archwires have been investigated. The calorimetric approach has been used for measuring transition temperatures occurring in the unstressed (e.g. undeflected) state of the wires. Static Thermo-mechanical analysis in a temperature controlled wet environment has been performed in the range of temperature between 5°C and 55°C for measuring temperature transitions occurring in highly deflected archwires in conjunction with the force released by these wires. (3) Results: Plateau forces investigated in Part I and those reported in the literature describes the wire’s behaviour only at deflection levels close to the end point of the force plateau extension detected at 37°C. Upon heating or cooling, the austenite finish (Af) transition temperature and the martensite start (Ms) temperature largely depends on the deflection level for both NiTi and CuNiTi. (4) Conclusions: The plateau force levels at 37°C, broadly reported in the literature, only represent the lower boundary force that a superelastic wire releases at 37°C above its elastic limit. For both NiTi and CuNiTi, plateau force levels at 37°C can be predicted by the static TMA profile matching the end point of the force plateau extension. Transition temperatures in largely deflected wires are significantly higher than those determined through the calorimetric approach.

Can the type of implant rehabilitation influence peri-implant bone loss in case of full-arch mandibular prosthesis? The purpose of the study was to assess, by orthopantomograms (OPG), bone loss around implants in different types of implant-supported prosthetic rehabilitations and evaluate potential risk factors associated with the number and location of implants that may have an association with bone defect. A radiographic study was conducted on 22317 OPGs in the time range from 2010 to 2024. All OPGs with implant-supported prosthetic mandibular rehabilitations were included in the study. A total of 155 OPGs were evaluated, with peri-implant bone loss identified in 64 (41.3%). Distal implants (furthest from the center) across various positioning patterns were most susceptible to bone loss, with positions 3.6 and 4.6 demonstrating the most frequent occurrences (25 and 26 cases, respectively). χ² test revealed significant associations between both implant positioning pattern (p &lt; 0.001) and number of implants (p &lt; 0.001) with peri-implant bone loss. Also by updating the sample of OPGs, increased susceptibility to bone resorption was found for implants placed distal to the mental foramen compared to mesial ones in full-arch implant-supported fixed prostheses. Prospective clinical studies will then be useful to investigate this finding further.

The “Gut-Liver Axis” refers to physiological bidirectional interplay between the gut and its microbiota and the liver which, in health, occurs thanks to a condition of immune tolerance. In recent years, several studies have shown that, in case of modifications of gut bacterial homeostasis or impairment of intestinal barrier functions, cholangiocytes, which are the epithelial cells lining the bile ducts, activate innate immune responses against gut-derived microorganisms or bacterial products that reach the liver via enterohepatic circulation. Intestinal dysbiosis or impaired intestinal barrier functions expose cholangiocytes to an increasing amount of microorganisms and may exacerbate inflammatory responses thus leading to fibrotic remodeling of the organ. The present review focuses on the role of the gut liver axis in the pathogenesis of cholangiopathies.

This study aimed to evaluate the discrepancies between genetic and visual coat color assignment in the Sarcidano Horse and to elucidate potential reasons. Individual DNA from 90 Sarcidano Horses was used for genetic assignment of coat color to explore the correspondence with individual forms containing phenotypical traits. The MC1R exon 1 and ASIP exon 3 have been genotyped and sequenced to obtain a picture of the coat color distribution in this breed. Surprisingly, once we compared the genetic results with the individual forms reporting the phenotypic data for each subject, a certain degree of non-correspondence between the phenotypic and genetic data in relation to coat color emerged. From the genetic analysis, Chestnuts (n = 58) resulted the most common Sarcidano Horse (n = 58), followed by a quite large number of Blacks (n = 28) and a very small number of Bays (n = 4), whereas phenotypic distribution resulted in 38 Chestnuts, 40 Bays, only 2 Blacks, and 10 Grays (without the possibility of recognizing the true color they carried). Chestnut resulted a very representative coat color, while many horses that visually identified as Bays were genetically Blacks. This discrepancy, that could be due to a variety of individual and external factors, including age, time of year, living situation and dietary condition, suggesting the importance of accurate coat color identification to ensure adequate features registration and reliable prediction of offspring’s coat color.

Background: DNA-RNA compounds have shown promising protection against cell oxidative stress. This study aimed to assess the cytotoxicity, protective, or preventive effect of different experimental formulations on oral epithelia’s oxidative stress in vitro. Methods: Reconstituted human oral epithelia (RHOE) were grown air-lifted in a continuous-flow bioreactor. Mouthwash and gels containing DNA-RNA compounds and other bioactive molecules were tested on a model of oxidative stress generated by hydrogen peroxide treatment. Epithelia viability was evaluated using a biochemical MTT-based assay and confocal microscopy; structural and ultrastructural morphology was evaluated by light microscopy and TEM. Results: DNA-RNA showed non-cytotoxic activity and effectively protected against oxidative stress, but not in its prevention. Gel formulation did not express adequate activity compared to the mouthwash. Excipients played a fundamental role in enhancing or even decreasing the bioactive molecules’ effect. Conclusion: A mouthwash formulation with hydrolyzed DNA-RNA effectively protected against oxidative stress without additional enhancement by other bioactive molecules. Active compounds such as hyaluronic acid, β-Glucan, allantoin, bisabolol, ruscogenin, and essential oils showed a protective effect against oxidative stress, which was not synergistic with the one of DNA-RNA. Surfactant agents showed harmful activity against oral epithelia.

The decarbonization of the electricity grid as one among the actions to reduce fossil fuel emissions, and thus their impact on global warming in the future, will be achieved mainly via the integration and widespread diffusion of renewable power sources. This is going to be supported also by the shift from the paradigm production-transmission-distribution, where electricity production oversees large-size power plants, to renewable-based distributed/diffused production, where electricity is generated very close or even by the same (group of) user(s) (or prosumers in the latter case). The number of mid-/small-size installations based on renewable energy technologies will therefore increase substantially, and the related renewable generation will be dominant against that from large-size power plants. Unfortunately, this will reduce the reliability of the grid very likely, unless appropriate countermeasures are taken/implemented, hopefully at the same time the paradigm shift is being achieved. To this aim, it is important to identify the anomalies and main fault causes that might determine in renewable-based power systems. This paper surveys the current state-of-the-art on anomalies and faults affecting wind-PV-storage hybrid power systems, i.e., the main renewable technology ensemble that will establish the future grid, and highlights possible research directions that may help to fill the literature gaps.

Keywords: Arachis quality; pod separation; plant extraction, peanut

In the Emergency Department (ED), pain is one of the symptoms that is most frequently reported, making it one of the most significant issues for the emergency physician, but is frequently under treated. Intravenous (IV), oral (PO), and intramuscular (IM) delivery are the standard methods for administering acute pain relief. Firstly, we compared the safety and efficacy of IN analgesia to other conventional routes of analgesia to assess if IN analgesia may be an alternative for the management of acute pain in ED. Secondary, we analyzed the incidence and severity of adverse events (AEs) and rescue analgesia required. We performed a systematic review-based keywords in Pubmed/Medline, Scopus, EMBASE, the Cochrane Library and Controlled Trials Register finding only twenty randomized Clinical trials eligible in the timeline 1992-2022. A total of 2098 patients were analyzed and compared to intravenous analgesia showing no statistical difference in adverse effects. In addition, intranasal analgesia also has a rapid onset and quick absorption. Fentanyl and ketamine are two intranasal drugs that appear promising and may be taken simply and safely while providing effective pain relief. IN is simple to administer, non-invasive, rapid onset and quick absorption; it might be a viable choice in a variety of situations to reduce patient suffering or delays in pain management. Analgesia needs to be tailored to each patient's features and type of pain: IN Fentanyl and Ketamine look promising and may be administered easily and safely while providing effective pain relief.

Eotaxin-3 is a key chemokine with a relevant role in eosinophilic esophagitis, a rare chronic immune/antigen-mediated inflammatory disorder. Eotaxin-3 is a potent activator of eosinophil emergence and migration, which may lead to allergic airway inflammation. We investigated by bioinformatics tools the protein structure and the possible effects of the known variations reported in public databases. Following a procedure already established, we created a 3D model of the whole protein and modelled the structure of 105 protein variants due to known point mutations. The effects of the amino acid substitution at the level of impact on protein structure, stability, and possibly function, were detected by the bioinformatics procedure and described in detail. A web application was implemented to browse the results of the analysis and visualize the 3D models, with the opportunity of downloading the models and analyze by the own software. Among 105 amino acid substitutions investigated, the study evidenced in 44 cases at least one change in any of the investigated structural parameters. Other 6 variations are also relevant, although a structural effect is not detected by our analysis, because they substituted amino acids highly conserved, which suggests a possible function role. All these variations should be the object of particular attention, as they may induce loss of functionality in the protein.

The present work fronts the human pose estimation problem, developing a method that enables automated ergonomic risk assessment. A research methodology is developed to calculate joint angles from digital snapshots or videos by using computer vision and machine learning techniques to get a more accurate ergonomic risk assessment. Starting from an ergonomic analysis, the study explores the use of a semi-supervised training method to detect the skeletons of workers. The research methodology developed aims to infer the positions and angles of the joints, to calculate the criticality index based on the RULA scores and fuzzy rules. Then, to prevent work-related musculoskeletal disorders (WMSD), improve production capacity and decrease the ergonomic risk, the system uses joint with a collaborative robot to support the worker in carrying out the most critical operations. The method has been tested on a real industrial case in which manual assembly activities of electrical components are conducted. The approach developed can overcome the limitations of recent developments based on computer vision or wearable measurement, sensors by performing an assessment with an objective and flexible ap-proach to postural analysis development.

The use of Smart Antenna Systems (SAS) in pervasive environments such the Mobile Ad hoc Networks (MANET) has been promoted as the best choice to improve Spatial Division Multiple Access (SDMA) and throughput. Although directional communications are expected to provide great advantages in terms of network performance, directional MAC (Medium Access Control) protocols introduce several issues. One of the most known problems in this context is represented by the fact that, attempting to solve or at least mitigate the problems introduced by these kinds of antennas especially at MAC layer, a large amount of energy consumption is achieved ; for example, due to excessive retransmissions introduced by very frequently issue such as deafness and handoff. The expedients proposed in order to reduce these drawbacks attempting to limit beamforming time of nodes in cooperation with a Round-Robin scheduling, can grant high performance in terms of fairness and throughput. However the overall energy consumption in the network is not efficent due to the static approach. In view of this, we propose an Adaptive Beamforming Time with Round-Robin MAC providing for a dynamic assignment of the beamforming time with the purpose to limit the waste of energy of nodes.

Hip replacement has significantly improved the quality of life of patients with symptomatic hip osteoarthritis. Metal-on-metal (MoM) bearings have been used with conventional total hip re-placement (THR) for several decades with promising results from early applications. Wear and corrosion of these implants may lead to a release of metal products into surrounding tissue and body fluids. From the 1980s onwards, the search for increasingly better coupling materials with low levels of wear led to the rise of hard-on-hard couplings such as ceramic-on-ceramic (CoC). The latter is currently the coupling with the longest known duration and with a wear rate close to zero. MoM coupling has been for a long time the most significative alternative, but systemic and local complications linked to the release of chromium and cobalt ions, determine the withdrawn from the market. One other alternative proposed over the time has been Ceramic-on-Metal (CoM) bearing. Preliminary results have been described as favourable, but due to the failures of metal on metal it has been withdrawn from the market, without causing significant clinical complications. In this narrative review, we analysed risks and benefits associated with the implantation of hybrid hard-on-hard bearings, such as CoM.

Honey is a natural product that, thanks to its composition, particularly the high sugar content, is highly appreciated as an energy nourishment. In addition to sugars, it contains many other substances (carbohydrates, free amino acids, enzymatic proteins, organic acids, polyphenols) from which the therapeutic properties of honey arise: hydrating and osmotic activity, antimicrobial action, antioxidant and anti-inflammatory power. The present work aims to deepen the activity of skin protection exerted by honey, as a synergic result of its multiple therapeutic effects.Moreover, the study want to find possible correlations between biological properties and chemical-physical traits of honey. To carry out this research, five varieties of citrus honey, one of acacia honey, one of chestnut honey and, finally, one of multifloral honey were used. The honeys were first characterized by chemical-physical analysis (determination of water content, sugars, amino acids, polyphenols) and then subjected to qualitative melissopalynological analysis. Tests were also carried out to evaluate both their antioxidant power and the effect on collagenase, an enzyme involved in the degradation of collagen present in the extracellular matrix and, therefore, in the processes of skin aging. Finally, they were used in in vitro experiments to assess their action in stimulating cell viability and proliferation on human keratinocytes.

Repeated air pollution exposure is one of the major threats to skin health. Air pollution causes skin damage and accelerates skin ageing mainly through oxidative stress mechanisms. Since it is difficult to minimize skin exposure from air pollutants, especially in urban areas, strategies to protect the skin are needed. On the other hand, plant phenolic compounds have been found to be effective in attenuating cellular oxidative stress and inflammation induced by different air pollutants. Therefore, we conducted a 12-week randomized, placebo-controlled, double blind study to assess the efficacy of a polyphenol-enriched dietary supplement (comprised of olive leaf, lemon verbena, rosemary and Sophora japonica extracts) in reducing pollution-induced oxidative stress and in improving different skin parameters related to skin ageing of Caucasian and Asian volunteers living in a polluted urban European area (Milan). One hundred healthy women were recruited and randomized in the placebo or in the test dietary supplement treatment arms. To assess the efficacy of the dietary supplement, the total antioxidant capacity on saliva (FRAP) was determined, as well as the oxidative damage on skin (lipoperoxides content), the skin moisture (corneometry), the trans-epidermal water loss (Tewameter), the skin radiance and the skin colour, (spectrophotometry), the skin elasticity (cutometry), the skin sebum content (sebumeter), and the skin roughness (image analysis). As a result, both inter-group and intra-group analysis proved that the dietary supplement improved all clinical and biochemical monitored parameters, in both Caucasian and Asian individuals. In conclusion, the results of the study indicate a reduced oxidative stress-induced skin damage in both Asian and Caucasian women living in a polluted urban area.